diff --git a/.gitattributes b/.gitattributes new file mode 100644 index 0000000..1ff0c42 --- /dev/null +++ b/.gitattributes @@ -0,0 +1,63 @@ +############################################################################### +# Set default behavior to automatically normalize line endings. +############################################################################### +* text=auto + +############################################################################### +# Set default behavior for command prompt diff. +# +# This is need for earlier builds of msysgit that does not have it on by +# default for csharp files. +# Note: This is only used by command line +############################################################################### +#*.cs diff=csharp + +############################################################################### +# Set the merge driver for project and solution files +# +# Merging from the command prompt will add diff markers to the files if there +# are conflicts (Merging from VS is not affected by the settings below, in VS +# the diff markers are never inserted). Diff markers may cause the following +# file extensions to fail to load in VS. An alternative would be to treat +# these files as binary and thus will always conflict and require user +# intervention with every merge. To do so, just uncomment the entries below +############################################################################### +#*.sln merge=binary +#*.csproj merge=binary +#*.vbproj merge=binary +#*.vcxproj merge=binary +#*.vcproj merge=binary +#*.dbproj merge=binary +#*.fsproj merge=binary +#*.lsproj merge=binary +#*.wixproj merge=binary +#*.modelproj merge=binary +#*.sqlproj merge=binary +#*.wwaproj merge=binary + +############################################################################### +# behavior for image files +# +# image files are treated as binary by default. +############################################################################### +#*.jpg binary +#*.png binary +#*.gif binary + +############################################################################### +# diff behavior for common document formats +# +# Convert binary document formats to text before diffing them. This feature +# is only available from the command line. Turn it on by uncommenting the +# entries below. +############################################################################### +#*.doc diff=astextplain +#*.DOC diff=astextplain +#*.docx diff=astextplain +#*.DOCX diff=astextplain +#*.dot diff=astextplain +#*.DOT diff=astextplain +#*.pdf diff=astextplain +#*.PDF diff=astextplain +#*.rtf diff=astextplain +#*.RTF diff=astextplain diff --git a/Befunge/Befunge.sln b/Befunge/Befunge.sln new file mode 100644 index 0000000..8af93c7 --- /dev/null +++ b/Befunge/Befunge.sln @@ -0,0 +1,28 @@ + +Microsoft Visual Studio Solution File, Format Version 12.00 +# Visual Studio 14 +VisualStudioVersion = 14.0.25420.1 +MinimumVisualStudioVersion = 10.0.40219.1 +Project("{FAE04EC0-301F-11D3-BF4B-00C04F79EFBC}") = "Editor", "Editor\Editor.csproj", "{837D07F7-946C-45F4-849A-B2AA528BE7DA}" +EndProject +Project("{FAE04EC0-301F-11D3-BF4B-00C04F79EFBC}") = "Interpreter", "Interpreter\Interpreter.csproj", "{2F3B583A-9F48-4853-94F2-88953CC6C8AD}" +EndProject +Global + GlobalSection(SolutionConfigurationPlatforms) = preSolution + Debug|Any CPU = Debug|Any CPU + Release|Any CPU = Release|Any CPU + EndGlobalSection + GlobalSection(ProjectConfigurationPlatforms) = postSolution + {837D07F7-946C-45F4-849A-B2AA528BE7DA}.Debug|Any CPU.ActiveCfg = Debug|Any CPU + {837D07F7-946C-45F4-849A-B2AA528BE7DA}.Debug|Any CPU.Build.0 = Debug|Any CPU + {837D07F7-946C-45F4-849A-B2AA528BE7DA}.Release|Any CPU.ActiveCfg = Release|Any CPU + {837D07F7-946C-45F4-849A-B2AA528BE7DA}.Release|Any CPU.Build.0 = Release|Any CPU + {2F3B583A-9F48-4853-94F2-88953CC6C8AD}.Debug|Any CPU.ActiveCfg = Debug|Any CPU + {2F3B583A-9F48-4853-94F2-88953CC6C8AD}.Debug|Any CPU.Build.0 = Debug|Any CPU + {2F3B583A-9F48-4853-94F2-88953CC6C8AD}.Release|Any CPU.ActiveCfg = Release|Any CPU + {2F3B583A-9F48-4853-94F2-88953CC6C8AD}.Release|Any CPU.Build.0 = Release|Any CPU + EndGlobalSection + GlobalSection(SolutionProperties) = preSolution + HideSolutionNode = FALSE + EndGlobalSection +EndGlobal diff --git a/Befunge/Befunge.sln.DotSettings b/Befunge/Befunge.sln.DotSettings new file mode 100644 index 0000000..f3f9b5c --- /dev/null +++ b/Befunge/Befunge.sln.DotSettings @@ -0,0 +1,2 @@ + + True \ No newline at end of file diff --git a/Befunge/Editor/App.config b/Befunge/Editor/App.config new file mode 100644 index 0000000..88fa402 --- /dev/null +++ b/Befunge/Editor/App.config @@ -0,0 +1,6 @@ + + + + + + \ No newline at end of file diff --git a/Befunge/Editor/App.xaml b/Befunge/Editor/App.xaml new file mode 100644 index 0000000..fe3d86b --- /dev/null +++ b/Befunge/Editor/App.xaml @@ -0,0 +1,8 @@ + + + + + diff --git a/Befunge/Editor/App.xaml.cs b/Befunge/Editor/App.xaml.cs new file mode 100644 index 0000000..dfd0352 --- /dev/null +++ b/Befunge/Editor/App.xaml.cs @@ -0,0 +1,11 @@ +using System.Windows; + +namespace Befunge.Editor +{ + /// + /// Interaction logic for App.xaml + /// + public partial class App : Application + { + } +} diff --git a/Befunge/Editor/CharStyles/ICharStyler.cs b/Befunge/Editor/CharStyles/ICharStyler.cs new file mode 100644 index 0000000..b127d6f --- /dev/null +++ b/Befunge/Editor/CharStyles/ICharStyler.cs @@ -0,0 +1,14 @@ +using System; +using System.Collections.Generic; +using System.Linq; +using System.Text; +using System.Threading.Tasks; +using System.Windows.Documents; + +namespace Befunge.Editor.CharStyles +{ + public interface ICharStyler + { + Run StyledString(string input); + } +} diff --git a/Befunge/Editor/Controls/CodeTextBox.cs b/Befunge/Editor/Controls/CodeTextBox.cs new file mode 100644 index 0000000..6ea6b01 --- /dev/null +++ b/Befunge/Editor/Controls/CodeTextBox.cs @@ -0,0 +1,26 @@ +using System.ComponentModel; +using System.Windows; +using System.Windows.Controls; +using Befunge.Editor.CharStyles; + +namespace Befunge.Editor.Controls +{ + public class CodeTextBox : RichTextBox + { + public static readonly DependencyProperty TextProperty = DependencyProperty.Register( + nameof(Text), typeof(string), typeof(CodeTextBox), new PropertyMetadata(default(string), OnTextPropertyChanged)); + + private static void OnTextPropertyChanged(DependencyObject d, DependencyPropertyChangedEventArgs e) + { + throw new System.NotImplementedException(); + } + + public string Text + { + get { return (string) GetValue(TextProperty); } + set { SetValue(TextProperty, value); } + } + + public ICharStyler TextStyler { get; set; } + } +} \ No newline at end of file diff --git a/Befunge/Editor/Editor.csproj b/Befunge/Editor/Editor.csproj new file mode 100644 index 0000000..2180e5a --- /dev/null +++ b/Befunge/Editor/Editor.csproj @@ -0,0 +1,114 @@ + + + + + Debug + AnyCPU + {837D07F7-946C-45F4-849A-B2AA528BE7DA} + WinExe + Properties + Befunge.Editor + Editor + v4.5.2 + 512 + {60dc8134-eba5-43b8-bcc9-bb4bc16c2548};{FAE04EC0-301F-11D3-BF4B-00C04F79EFBC} + 4 + true + + + AnyCPU + true + full + false + bin\Debug\ + DEBUG;TRACE + prompt + 4 + + + AnyCPU + pdbonly + true + bin\Release\ + TRACE + prompt + 4 + + + + + + + + + + + + 4.0 + + + + + + + + MSBuild:Compile + Designer + + + MSBuild:Compile + Designer + + + App.xaml + Code + + + + + MainWindow.xaml + Code + + + + + Code + + + True + True + Resources.resx + + + True + Settings.settings + True + + + ResXFileCodeGenerator + Resources.Designer.cs + + + SettingsSingleFileGenerator + Settings.Designer.cs + + + + + + + + + {2f3b583a-9f48-4853-94f2-88953cc6c8ad} + Interpreter + + + + + \ No newline at end of file diff --git a/Befunge/Editor/MainWindow.xaml b/Befunge/Editor/MainWindow.xaml new file mode 100644 index 0000000..858852b --- /dev/null +++ b/Befunge/Editor/MainWindow.xaml @@ -0,0 +1,12 @@ + + + + + diff --git a/Befunge/Editor/MainWindow.xaml.cs b/Befunge/Editor/MainWindow.xaml.cs new file mode 100644 index 0000000..2ff97f0 --- /dev/null +++ b/Befunge/Editor/MainWindow.xaml.cs @@ -0,0 +1,12 @@ +using System.Windows; + +namespace Befunge.Editor +{ + public partial class MainWindow + { + public MainWindow () + { + InitializeComponent (); + } + } +} diff --git a/Befunge/Editor/Properties/AssemblyInfo.cs b/Befunge/Editor/Properties/AssemblyInfo.cs new file mode 100644 index 0000000..8006285 --- /dev/null +++ b/Befunge/Editor/Properties/AssemblyInfo.cs @@ -0,0 +1,55 @@ +using System.Reflection; +using System.Resources; +using System.Runtime.CompilerServices; +using System.Runtime.InteropServices; +using System.Windows; + +// General Information about an assembly is controlled through the following +// set of attributes. Change these attribute values to modify the information +// associated with an assembly. +[assembly: AssemblyTitle ("Editor")] +[assembly: AssemblyDescription ("")] +[assembly: AssemblyConfiguration ("")] +[assembly: AssemblyCompany ("")] +[assembly: AssemblyProduct ("Editor")] +[assembly: AssemblyCopyright ("Copyright © 2016")] +[assembly: AssemblyTrademark ("")] +[assembly: AssemblyCulture ("")] + +// Setting ComVisible to false makes the types in this assembly not visible +// to COM components. If you need to access a type in this assembly from +// COM, set the ComVisible attribute to true on that type. +[assembly: ComVisible (false)] + +//In order to begin building localizable applications, set +//CultureYouAreCodingWith in your .csproj file +//inside a . For example, if you are using US english +//in your source files, set the to en-US. Then uncomment +//the NeutralResourceLanguage attribute below. Update the "en-US" in +//the line below to match the UICulture setting in the project file. + +//[assembly: NeutralResourcesLanguage("en-US", UltimateResourceFallbackLocation.Satellite)] + + +[assembly: ThemeInfo ( + ResourceDictionaryLocation.None, //where theme specific resource dictionaries are located + //(used if a resource is not found in the page, + // or application resource dictionaries) + ResourceDictionaryLocation.SourceAssembly //where the generic resource dictionary is located + //(used if a resource is not found in the page, + // app, or any theme specific resource dictionaries) +)] + + +// Version information for an assembly consists of the following four values: +// +// Major Version +// Minor Version +// Build Number +// Revision +// +// You can specify all the values or you can default the Build and Revision Numbers +// by using the '*' as shown below: +// [assembly: AssemblyVersion("1.0.*")] +[assembly: AssemblyVersion ("1.0.0.0")] +[assembly: AssemblyFileVersion ("1.0.0.0")] diff --git a/Befunge/Editor/Properties/Resources.Designer.cs b/Befunge/Editor/Properties/Resources.Designer.cs new file mode 100644 index 0000000..41d1f23 --- /dev/null +++ b/Befunge/Editor/Properties/Resources.Designer.cs @@ -0,0 +1,63 @@ +//------------------------------------------------------------------------------ +// +// This code was generated by a tool. +// Runtime Version:4.0.30319.42000 +// +// Changes to this file may cause incorrect behavior and will be lost if +// the code is regenerated. +// +//------------------------------------------------------------------------------ + +namespace Befunge.Editor.Properties { + using System; + + + /// + /// A strongly-typed resource class, for looking up localized strings, etc. + /// + // This class was auto-generated by the StronglyTypedResourceBuilder + // class via a tool like ResGen or Visual Studio. + // To add or remove a member, edit your .ResX file then rerun ResGen + // with the /str option, or rebuild your VS project. + [global::System.CodeDom.Compiler.GeneratedCodeAttribute("System.Resources.Tools.StronglyTypedResourceBuilder", "4.0.0.0")] + [global::System.Diagnostics.DebuggerNonUserCodeAttribute()] + [global::System.Runtime.CompilerServices.CompilerGeneratedAttribute()] + internal class Resources { + + private static global::System.Resources.ResourceManager resourceMan; + + private static global::System.Globalization.CultureInfo resourceCulture; + + [global::System.Diagnostics.CodeAnalysis.SuppressMessageAttribute("Microsoft.Performance", "CA1811:AvoidUncalledPrivateCode")] + internal Resources() { + } + + /// + /// Returns the cached ResourceManager instance used by this class. + /// + [global::System.ComponentModel.EditorBrowsableAttribute(global::System.ComponentModel.EditorBrowsableState.Advanced)] + internal static global::System.Resources.ResourceManager ResourceManager { + get { + if (object.ReferenceEquals(resourceMan, null)) { + global::System.Resources.ResourceManager temp = new global::System.Resources.ResourceManager("Befunge.Editor.Properties.Resources", typeof(Resources).Assembly); + resourceMan = temp; + } + return resourceMan; + } + } + + /// + /// Overrides the current thread's CurrentUICulture property for all + /// resource lookups using this strongly typed resource class. + /// + [global::System.ComponentModel.EditorBrowsableAttribute(global::System.ComponentModel.EditorBrowsableState.Advanced)] + internal static global::System.Globalization.CultureInfo Culture { + get { + return resourceCulture; + } + set { + resourceCulture = value; + } + } + } +} diff --git a/Befunge/Editor/Properties/Resources.resx b/Befunge/Editor/Properties/Resources.resx new file mode 100644 index 0000000..af7dbeb --- /dev/null +++ b/Befunge/Editor/Properties/Resources.resx @@ -0,0 +1,117 @@ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + text/microsoft-resx + + + 2.0 + + + System.Resources.ResXResourceReader, System.Windows.Forms, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089 + + + System.Resources.ResXResourceWriter, System.Windows.Forms, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089 + + \ No newline at end of file diff --git a/Befunge/Editor/Properties/Settings.Designer.cs b/Befunge/Editor/Properties/Settings.Designer.cs new file mode 100644 index 0000000..f6a55a6 --- /dev/null +++ b/Befunge/Editor/Properties/Settings.Designer.cs @@ -0,0 +1,26 @@ +//------------------------------------------------------------------------------ +// +// This code was generated by a tool. +// Runtime Version:4.0.30319.42000 +// +// Changes to this file may cause incorrect behavior and will be lost if +// the code is regenerated. +// +//------------------------------------------------------------------------------ + +namespace Befunge.Editor.Properties { + + + [global::System.Runtime.CompilerServices.CompilerGeneratedAttribute()] + [global::System.CodeDom.Compiler.GeneratedCodeAttribute("Microsoft.VisualStudio.Editors.SettingsDesigner.SettingsSingleFileGenerator", "14.0.0.0")] + internal sealed partial class Settings : global::System.Configuration.ApplicationSettingsBase { + + private static Settings defaultInstance = ((Settings)(global::System.Configuration.ApplicationSettingsBase.Synchronized(new Settings()))); + + public static Settings Default { + get { + return defaultInstance; + } + } + } +} diff --git a/Befunge/Editor/Properties/Settings.settings b/Befunge/Editor/Properties/Settings.settings new file mode 100644 index 0000000..033d7a5 --- /dev/null +++ b/Befunge/Editor/Properties/Settings.settings @@ -0,0 +1,7 @@ + + + + + + + \ No newline at end of file diff --git a/Befunge/Interpreter/IStepInterpreter.cs b/Befunge/Interpreter/IStepInterpreter.cs new file mode 100644 index 0000000..6492b3b --- /dev/null +++ b/Befunge/Interpreter/IStepInterpreter.cs @@ -0,0 +1,16 @@ +using System; +using System.ComponentModel; +using System.Threading.Tasks; + +namespace Befunge.Interpreter +{ + public interface StepInterpreter : INotifyPropertyChanged + { + IVec2 InstructionPointerPosition { get; } + string Output { get; } + Func InputRequest { get; set; } + + int? Step(); + int Run (); + } +} \ No newline at end of file diff --git a/Befunge/Interpreter/IVec2.cs b/Befunge/Interpreter/IVec2.cs new file mode 100644 index 0000000..6b69664 --- /dev/null +++ b/Befunge/Interpreter/IVec2.cs @@ -0,0 +1,16 @@ +using System.CodeDom; +using System.ComponentModel; +using System.Runtime.CompilerServices; +using System.Security.Cryptography.X509Certificates; + +namespace Befunge.Interpreter +{ + public interface IVec2 : INotifyPropertyChanged + { + int X { get; set; } + int Y { get; set; } + + int ToIndex(string text); + void FromIndex(string text, int i); + } +} \ No newline at end of file diff --git a/Befunge/Interpreter/Interpreter.csproj b/Befunge/Interpreter/Interpreter.csproj new file mode 100644 index 0000000..183837c --- /dev/null +++ b/Befunge/Interpreter/Interpreter.csproj @@ -0,0 +1,55 @@ + + + + + Debug + AnyCPU + {2F3B583A-9F48-4853-94F2-88953CC6C8AD} + Library + Properties + Befunge.Interpreter + Interpreter + v4.5.2 + 512 + + + true + full + false + bin\Debug\ + DEBUG;TRACE + prompt + 4 + + + pdbonly + true + bin\Release\ + TRACE + prompt + 4 + + + + + + + + + + + + + + + + + + + \ No newline at end of file diff --git a/Befunge/Interpreter/Properties/Annotations.cs b/Befunge/Interpreter/Properties/Annotations.cs new file mode 100644 index 0000000..8b6e367 --- /dev/null +++ b/Befunge/Interpreter/Properties/Annotations.cs @@ -0,0 +1,1039 @@ +/* MIT License + +Copyright (c) 2016 JetBrains http://www.jetbrains.com + +Permission is hereby granted, free of charge, to any person obtaining a copy +of this software and associated documentation files (the "Software"), to deal +in the Software without restriction, including without limitation the rights +to use, copy, modify, merge, publish, distribute, sublicense, and/or sell +copies of the Software, and to permit persons to whom the Software is +furnished to do so, subject to the following conditions: + +The above copyright notice and this permission notice shall be included in all +copies or substantial portions of the Software. + +THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR +IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, +FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE +AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER +LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, +OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE +SOFTWARE. */ + +using System; + +#pragma warning disable 1591 +// ReSharper disable UnusedMember.Global +// ReSharper disable MemberCanBePrivate.Global +// ReSharper disable UnusedAutoPropertyAccessor.Global +// ReSharper disable IntroduceOptionalParameters.Global +// ReSharper disable MemberCanBeProtected.Global +// ReSharper disable InconsistentNaming + +namespace Befunge.Interpreter.Annotations +{ + /// + /// Indicates that the value of the marked element could be null sometimes, + /// so the check for null is necessary before its usage. + /// + /// + /// [CanBeNull] object Test() => null; + /// + /// void UseTest() { + /// var p = Test(); + /// var s = p.ToString(); // Warning: Possible 'System.NullReferenceException' + /// } + /// + [AttributeUsage( + AttributeTargets.Method | AttributeTargets.Parameter | AttributeTargets.Property | + AttributeTargets.Delegate | AttributeTargets.Field | AttributeTargets.Event | + AttributeTargets.Class | AttributeTargets.Interface | AttributeTargets.GenericParameter)] + public sealed class CanBeNullAttribute : Attribute { } + + /// + /// Indicates that the value of the marked element could never be null. + /// + /// + /// [NotNull] object Foo() { + /// return null; // Warning: Possible 'null' assignment + /// } + /// + [AttributeUsage( + AttributeTargets.Method | AttributeTargets.Parameter | AttributeTargets.Property | + AttributeTargets.Delegate | AttributeTargets.Field | AttributeTargets.Event | + AttributeTargets.Class | AttributeTargets.Interface | AttributeTargets.GenericParameter)] + public sealed class NotNullAttribute : Attribute { } + + /// + /// Can be appplied to symbols of types derived from IEnumerable as well as to symbols of Task + /// and Lazy classes to indicate that the value of a collection item, of the Task.Result property + /// or of the Lazy.Value property can never be null. + /// + [AttributeUsage( + AttributeTargets.Method | AttributeTargets.Parameter | AttributeTargets.Property | + AttributeTargets.Delegate | AttributeTargets.Field)] + public sealed class ItemNotNullAttribute : Attribute { } + + /// + /// Can be appplied to symbols of types derived from IEnumerable as well as to symbols of Task + /// and Lazy classes to indicate that the value of a collection item, of the Task.Result property + /// or of the Lazy.Value property can be null. + /// + [AttributeUsage( + AttributeTargets.Method | AttributeTargets.Parameter | AttributeTargets.Property | + AttributeTargets.Delegate | AttributeTargets.Field)] + public sealed class ItemCanBeNullAttribute : Attribute { } + + /// + /// Implicitly apply [NotNull]/[ItemNotNull] annotation to all the of type members and parameters + /// in particular scope where this annotation is used (type declaration or whole assembly). + /// + [AttributeUsage( + AttributeTargets.Class | AttributeTargets.Struct | AttributeTargets.Interface | AttributeTargets.Assembly)] + public sealed class ImplicitNotNullAttribute : Attribute { } + + /// + /// Indicates that the marked method builds string by format pattern and (optional) arguments. + /// Parameter, which contains format string, should be given in constructor. The format string + /// should be in -like form. + /// + /// + /// [StringFormatMethod("message")] + /// void ShowError(string message, params object[] args) { /* do something */ } + /// + /// void Foo() { + /// ShowError("Failed: {0}"); // Warning: Non-existing argument in format string + /// } + /// + [AttributeUsage( + AttributeTargets.Constructor | AttributeTargets.Method | + AttributeTargets.Property | AttributeTargets.Delegate)] + public sealed class StringFormatMethodAttribute : Attribute + { + /// + /// Specifies which parameter of an annotated method should be treated as format-string + /// + public StringFormatMethodAttribute([NotNull] string formatParameterName) + { + FormatParameterName = formatParameterName; + } + + [NotNull] public string FormatParameterName { get; private set; } + } + + /// + /// For a parameter that is expected to be one of the limited set of values. + /// Specify fields of which type should be used as values for this parameter. + /// + [AttributeUsage(AttributeTargets.Parameter | AttributeTargets.Property | AttributeTargets.Field)] + public sealed class ValueProviderAttribute : Attribute + { + public ValueProviderAttribute([NotNull] string name) + { + Name = name; + } + + [NotNull] public string Name { get; private set; } + } + + /// + /// Indicates that the function argument should be string literal and match one + /// of the parameters of the caller function. For example, ReSharper annotates + /// the parameter of . + /// + /// + /// void Foo(string param) { + /// if (param == null) + /// throw new ArgumentNullException("par"); // Warning: Cannot resolve symbol + /// } + /// + [AttributeUsage(AttributeTargets.Parameter)] + public sealed class InvokerParameterNameAttribute : Attribute { } + + /// + /// Indicates that the method is contained in a type that implements + /// System.ComponentModel.INotifyPropertyChanged interface and this method + /// is used to notify that some property value changed. + /// + /// + /// The method should be non-static and conform to one of the supported signatures: + /// + /// NotifyChanged(string) + /// NotifyChanged(params string[]) + /// NotifyChanged{T}(Expression{Func{T}}) + /// NotifyChanged{T,U}(Expression{Func{T,U}}) + /// SetProperty{T}(ref T, T, string) + /// + /// + /// + /// public class Foo : INotifyPropertyChanged { + /// public event PropertyChangedEventHandler PropertyChanged; + /// + /// [NotifyPropertyChangedInvocator] + /// protected virtual void NotifyChanged(string propertyName) { ... } + /// + /// string _name; + /// + /// public string Name { + /// get { return _name; } + /// set { _name = value; NotifyChanged("LastName"); /* Warning */ } + /// } + /// } + /// + /// Examples of generated notifications: + /// + /// NotifyChanged("Property") + /// NotifyChanged(() => Property) + /// NotifyChanged((VM x) => x.Property) + /// SetProperty(ref myField, value, "Property") + /// + /// + [AttributeUsage(AttributeTargets.Method)] + public sealed class NotifyPropertyChangedInvocatorAttribute : Attribute + { + public NotifyPropertyChangedInvocatorAttribute() { } + public NotifyPropertyChangedInvocatorAttribute([NotNull] string parameterName) + { + ParameterName = parameterName; + } + + [CanBeNull] public string ParameterName { get; private set; } + } + + /// + /// Describes dependency between method input and output. + /// + /// + ///

Function Definition Table syntax:

+ /// + /// FDT ::= FDTRow [;FDTRow]* + /// FDTRow ::= Input => Output | Output <= Input + /// Input ::= ParameterName: Value [, Input]* + /// Output ::= [ParameterName: Value]* {halt|stop|void|nothing|Value} + /// Value ::= true | false | null | notnull | canbenull + /// + /// If method has single input parameter, it's name could be omitted.
+ /// Using halt (or void/nothing, which is the same) + /// for method output means that the methos doesn't return normally.
+ /// canbenull annotation is only applicable for output parameters.
+ /// You can use multiple [ContractAnnotation] for each FDT row, + /// or use single attribute with rows separated by semicolon.
+ ///
+ /// + /// + /// [ContractAnnotation("=> halt")] + /// public void TerminationMethod() + /// + /// + /// [ContractAnnotation("halt <= condition: false")] + /// public void Assert(bool condition, string text) // regular assertion method + /// + /// + /// [ContractAnnotation("s:null => true")] + /// public bool IsNullOrEmpty(string s) // string.IsNullOrEmpty() + /// + /// + /// // A method that returns null if the parameter is null, + /// // and not null if the parameter is not null + /// [ContractAnnotation("null => null; notnull => notnull")] + /// public object Transform(object data) + /// + /// + /// [ContractAnnotation("s:null=>false; =>true,result:notnull; =>false, result:null")] + /// public bool TryParse(string s, out Person result) + /// + /// + [AttributeUsage(AttributeTargets.Method, AllowMultiple = true)] + public sealed class ContractAnnotationAttribute : Attribute + { + public ContractAnnotationAttribute([NotNull] string contract) + : this(contract, false) { } + + public ContractAnnotationAttribute([NotNull] string contract, bool forceFullStates) + { + Contract = contract; + ForceFullStates = forceFullStates; + } + + [NotNull] public string Contract { get; private set; } + public bool ForceFullStates { get; private set; } + } + + /// + /// Indicates that marked element should be localized or not. + /// + /// + /// [LocalizationRequiredAttribute(true)] + /// class Foo { + /// string str = "my string"; // Warning: Localizable string + /// } + /// + [AttributeUsage(AttributeTargets.All)] + public sealed class LocalizationRequiredAttribute : Attribute + { + public LocalizationRequiredAttribute() : this(true) { } + public LocalizationRequiredAttribute(bool required) + { + Required = required; + } + + public bool Required { get; private set; } + } + + /// + /// Indicates that the value of the marked type (or its derivatives) + /// cannot be compared using '==' or '!=' operators and Equals() + /// should be used instead. However, using '==' or '!=' for comparison + /// with null is always permitted. + /// + /// + /// [CannotApplyEqualityOperator] + /// class NoEquality { } + /// + /// class UsesNoEquality { + /// void Test() { + /// var ca1 = new NoEquality(); + /// var ca2 = new NoEquality(); + /// if (ca1 != null) { // OK + /// bool condition = ca1 == ca2; // Warning + /// } + /// } + /// } + /// + [AttributeUsage(AttributeTargets.Interface | AttributeTargets.Class | AttributeTargets.Struct)] + public sealed class CannotApplyEqualityOperatorAttribute : Attribute { } + + /// + /// When applied to a target attribute, specifies a requirement for any type marked + /// with the target attribute to implement or inherit specific type or types. + /// + /// + /// [BaseTypeRequired(typeof(IComponent)] // Specify requirement + /// class ComponentAttribute : Attribute { } + /// + /// [Component] // ComponentAttribute requires implementing IComponent interface + /// class MyComponent : IComponent { } + /// + [AttributeUsage(AttributeTargets.Class, AllowMultiple = true)] + [BaseTypeRequired(typeof(Attribute))] + public sealed class BaseTypeRequiredAttribute : Attribute + { + public BaseTypeRequiredAttribute([NotNull] Type baseType) + { + BaseType = baseType; + } + + [NotNull] public Type BaseType { get; private set; } + } + + /// + /// Indicates that the marked symbol is used implicitly (e.g. via reflection, in external library), + /// so this symbol will not be marked as unused (as well as by other usage inspections). + /// + [AttributeUsage(AttributeTargets.All)] + public sealed class UsedImplicitlyAttribute : Attribute + { + public UsedImplicitlyAttribute() + : this(ImplicitUseKindFlags.Default, ImplicitUseTargetFlags.Default) { } + + public UsedImplicitlyAttribute(ImplicitUseKindFlags useKindFlags) + : this(useKindFlags, ImplicitUseTargetFlags.Default) { } + + public UsedImplicitlyAttribute(ImplicitUseTargetFlags targetFlags) + : this(ImplicitUseKindFlags.Default, targetFlags) { } + + public UsedImplicitlyAttribute(ImplicitUseKindFlags useKindFlags, ImplicitUseTargetFlags targetFlags) + { + UseKindFlags = useKindFlags; + TargetFlags = targetFlags; + } + + public ImplicitUseKindFlags UseKindFlags { get; private set; } + public ImplicitUseTargetFlags TargetFlags { get; private set; } + } + + /// + /// Should be used on attributes and causes ReSharper to not mark symbols marked with such attributes + /// as unused (as well as by other usage inspections) + /// + [AttributeUsage(AttributeTargets.Class | AttributeTargets.GenericParameter)] + public sealed class MeansImplicitUseAttribute : Attribute + { + public MeansImplicitUseAttribute() + : this(ImplicitUseKindFlags.Default, ImplicitUseTargetFlags.Default) { } + + public MeansImplicitUseAttribute(ImplicitUseKindFlags useKindFlags) + : this(useKindFlags, ImplicitUseTargetFlags.Default) { } + + public MeansImplicitUseAttribute(ImplicitUseTargetFlags targetFlags) + : this(ImplicitUseKindFlags.Default, targetFlags) { } + + public MeansImplicitUseAttribute(ImplicitUseKindFlags useKindFlags, ImplicitUseTargetFlags targetFlags) + { + UseKindFlags = useKindFlags; + TargetFlags = targetFlags; + } + + [UsedImplicitly] public ImplicitUseKindFlags UseKindFlags { get; private set; } + [UsedImplicitly] public ImplicitUseTargetFlags TargetFlags { get; private set; } + } + + [Flags] + public enum ImplicitUseKindFlags + { + Default = Access | Assign | InstantiatedWithFixedConstructorSignature, + /// Only entity marked with attribute considered used. + Access = 1, + /// Indicates implicit assignment to a member. + Assign = 2, + /// + /// Indicates implicit instantiation of a type with fixed constructor signature. + /// That means any unused constructor parameters won't be reported as such. + /// + InstantiatedWithFixedConstructorSignature = 4, + /// Indicates implicit instantiation of a type. + InstantiatedNoFixedConstructorSignature = 8, + } + + /// + /// Specify what is considered used implicitly when marked + /// with or . + /// + [Flags] + public enum ImplicitUseTargetFlags + { + Default = Itself, + Itself = 1, + /// Members of entity marked with attribute are considered used. + Members = 2, + /// Entity marked with attribute and all its members considered used. + WithMembers = Itself | Members + } + + /// + /// This attribute is intended to mark publicly available API + /// which should not be removed and so is treated as used. + /// + [MeansImplicitUse(ImplicitUseTargetFlags.WithMembers)] + public sealed class PublicAPIAttribute : Attribute + { + public PublicAPIAttribute() { } + public PublicAPIAttribute([NotNull] string comment) + { + Comment = comment; + } + + [CanBeNull] public string Comment { get; private set; } + } + + /// + /// Tells code analysis engine if the parameter is completely handled when the invoked method is on stack. + /// If the parameter is a delegate, indicates that delegate is executed while the method is executed. + /// If the parameter is an enumerable, indicates that it is enumerated while the method is executed. + /// + [AttributeUsage(AttributeTargets.Parameter)] + public sealed class InstantHandleAttribute : Attribute { } + + /// + /// Indicates that a method does not make any observable state changes. + /// The same as System.Diagnostics.Contracts.PureAttribute. + /// + /// + /// [Pure] int Multiply(int x, int y) => x * y; + /// + /// void M() { + /// Multiply(123, 42); // Waring: Return value of pure method is not used + /// } + /// + [AttributeUsage(AttributeTargets.Method)] + public sealed class PureAttribute : Attribute { } + + /// + /// Indicates that the return value of method invocation must be used. + /// + [AttributeUsage(AttributeTargets.Method)] + public sealed class MustUseReturnValueAttribute : Attribute + { + public MustUseReturnValueAttribute() { } + public MustUseReturnValueAttribute([NotNull] string justification) + { + Justification = justification; + } + + [CanBeNull] public string Justification { get; private set; } + } + + /// + /// Indicates the type member or parameter of some type, that should be used instead of all other ways + /// to get the value that type. This annotation is useful when you have some "context" value evaluated + /// and stored somewhere, meaning that all other ways to get this value must be consolidated with existing one. + /// + /// + /// class Foo { + /// [ProvidesContext] IBarService _barService = ...; + /// + /// void ProcessNode(INode node) { + /// DoSomething(node, node.GetGlobalServices().Bar); + /// // ^ Warning: use value of '_barService' field + /// } + /// } + /// + [AttributeUsage( + AttributeTargets.Field | AttributeTargets.Property | AttributeTargets.Parameter | AttributeTargets.Method | + AttributeTargets.Class | AttributeTargets.Interface | AttributeTargets.Struct | AttributeTargets.GenericParameter)] + public sealed class ProvidesContextAttribute : Attribute { } + + /// + /// Indicates that a parameter is a path to a file or a folder within a web project. + /// Path can be relative or absolute, starting from web root (~). + /// + [AttributeUsage(AttributeTargets.Parameter)] + public sealed class PathReferenceAttribute : Attribute + { + public PathReferenceAttribute() { } + public PathReferenceAttribute([NotNull, PathReference] string basePath) + { + BasePath = basePath; + } + + [CanBeNull] public string BasePath { get; private set; } + } + + /// + /// An extension method marked with this attribute is processed by ReSharper code completion + /// as a 'Source Template'. When extension method is completed over some expression, it's source code + /// is automatically expanded like a template at call site. + /// + /// + /// Template method body can contain valid source code and/or special comments starting with '$'. + /// Text inside these comments is added as source code when the template is applied. Template parameters + /// can be used either as additional method parameters or as identifiers wrapped in two '$' signs. + /// Use the attribute to specify macros for parameters. + /// + /// + /// In this example, the 'forEach' method is a source template available over all values + /// of enumerable types, producing ordinary C# 'foreach' statement and placing caret inside block: + /// + /// [SourceTemplate] + /// public static void forEach<T>(this IEnumerable<T> xs) { + /// foreach (var x in xs) { + /// //$ $END$ + /// } + /// } + /// + /// + [AttributeUsage(AttributeTargets.Method)] + public sealed class SourceTemplateAttribute : Attribute { } + + /// + /// Allows specifying a macro for a parameter of a source template. + /// + /// + /// You can apply the attribute on the whole method or on any of its additional parameters. The macro expression + /// is defined in the property. When applied on a method, the target + /// template parameter is defined in the property. To apply the macro silently + /// for the parameter, set the property value = -1. + /// + /// + /// Applying the attribute on a source template method: + /// + /// [SourceTemplate, Macro(Target = "item", Expression = "suggestVariableName()")] + /// public static void forEach<T>(this IEnumerable<T> collection) { + /// foreach (var item in collection) { + /// //$ $END$ + /// } + /// } + /// + /// Applying the attribute on a template method parameter: + /// + /// [SourceTemplate] + /// public static void something(this Entity x, [Macro(Expression = "guid()", Editable = -1)] string newguid) { + /// /*$ var $x$Id = "$newguid$" + x.ToString(); + /// x.DoSomething($x$Id); */ + /// } + /// + /// + [AttributeUsage(AttributeTargets.Parameter | AttributeTargets.Method, AllowMultiple = true)] + public sealed class MacroAttribute : Attribute + { + /// + /// Allows specifying a macro that will be executed for a source template + /// parameter when the template is expanded. + /// + public string Expression { get; set; } + + /// + /// Allows specifying which occurrence of the target parameter becomes editable when the template is deployed. + /// + /// + /// If the target parameter is used several times in the template, only one occurrence becomes editable; + /// other occurrences are changed synchronously. To specify the zero-based index of the editable occurrence, + /// use values >= 0. To make the parameter non-editable when the template is expanded, use -1. + /// > + public int Editable { get; set; } + + /// + /// Identifies the target parameter of a source template if the + /// is applied on a template method. + /// + public string Target { get; set; } + } + + [AttributeUsage(AttributeTargets.Assembly, AllowMultiple = true)] + public sealed class AspMvcAreaMasterLocationFormatAttribute : Attribute + { + public AspMvcAreaMasterLocationFormatAttribute([NotNull] string format) + { + Format = format; + } + + [NotNull] public string Format { get; private set; } + } + + [AttributeUsage(AttributeTargets.Assembly, AllowMultiple = true)] + public sealed class AspMvcAreaPartialViewLocationFormatAttribute : Attribute + { + public AspMvcAreaPartialViewLocationFormatAttribute([NotNull] string format) + { + Format = format; + } + + [NotNull] public string Format { get; private set; } + } + + [AttributeUsage(AttributeTargets.Assembly, AllowMultiple = true)] + public sealed class AspMvcAreaViewLocationFormatAttribute : Attribute + { + public AspMvcAreaViewLocationFormatAttribute([NotNull] string format) + { + Format = format; + } + + [NotNull] public string Format { get; private set; } + } + + [AttributeUsage(AttributeTargets.Assembly, AllowMultiple = true)] + public sealed class AspMvcMasterLocationFormatAttribute : Attribute + { + public AspMvcMasterLocationFormatAttribute(string format) + { + Format = format; + } + + public string Format { get; private set; } + } + + [AttributeUsage(AttributeTargets.Assembly, AllowMultiple = true)] + public sealed class AspMvcPartialViewLocationFormatAttribute : Attribute + { + public AspMvcPartialViewLocationFormatAttribute([NotNull] string format) + { + Format = format; + } + + [NotNull] public string Format { get; private set; } + } + + [AttributeUsage(AttributeTargets.Assembly, AllowMultiple = true)] + public sealed class AspMvcViewLocationFormatAttribute : Attribute + { + public AspMvcViewLocationFormatAttribute([NotNull] string format) + { + Format = format; + } + + [NotNull] public string Format { get; private set; } + } + + /// + /// ASP.NET MVC attribute. If applied to a parameter, indicates that the parameter + /// is an MVC action. If applied to a method, the MVC action name is calculated + /// implicitly from the context. Use this attribute for custom wrappers similar to + /// System.Web.Mvc.Html.ChildActionExtensions.RenderAction(HtmlHelper, String). + /// + [AttributeUsage(AttributeTargets.Parameter | AttributeTargets.Method)] + public sealed class AspMvcActionAttribute : Attribute + { + public AspMvcActionAttribute() { } + public AspMvcActionAttribute([NotNull] string anonymousProperty) + { + AnonymousProperty = anonymousProperty; + } + + [CanBeNull] public string AnonymousProperty { get; private set; } + } + + /// + /// ASP.NET MVC attribute. Indicates that a parameter is an MVC area. + /// Use this attribute for custom wrappers similar to + /// System.Web.Mvc.Html.ChildActionExtensions.RenderAction(HtmlHelper, String). + /// + [AttributeUsage(AttributeTargets.Parameter)] + public sealed class AspMvcAreaAttribute : Attribute + { + public AspMvcAreaAttribute() { } + public AspMvcAreaAttribute([NotNull] string anonymousProperty) + { + AnonymousProperty = anonymousProperty; + } + + [CanBeNull] public string AnonymousProperty { get; private set; } + } + + /// + /// ASP.NET MVC attribute. If applied to a parameter, indicates that the parameter is + /// an MVC controller. If applied to a method, the MVC controller name is calculated + /// implicitly from the context. Use this attribute for custom wrappers similar to + /// System.Web.Mvc.Html.ChildActionExtensions.RenderAction(HtmlHelper, String, String). + /// + [AttributeUsage(AttributeTargets.Parameter | AttributeTargets.Method)] + public sealed class AspMvcControllerAttribute : Attribute + { + public AspMvcControllerAttribute() { } + public AspMvcControllerAttribute([NotNull] string anonymousProperty) + { + AnonymousProperty = anonymousProperty; + } + + [CanBeNull] public string AnonymousProperty { get; private set; } + } + + /// + /// ASP.NET MVC attribute. Indicates that a parameter is an MVC Master. Use this attribute + /// for custom wrappers similar to System.Web.Mvc.Controller.View(String, String). + /// + [AttributeUsage(AttributeTargets.Parameter)] + public sealed class AspMvcMasterAttribute : Attribute { } + + /// + /// ASP.NET MVC attribute. Indicates that a parameter is an MVC model type. Use this attribute + /// for custom wrappers similar to System.Web.Mvc.Controller.View(String, Object). + /// + [AttributeUsage(AttributeTargets.Parameter)] + public sealed class AspMvcModelTypeAttribute : Attribute { } + + /// + /// ASP.NET MVC attribute. If applied to a parameter, indicates that the parameter is an MVC + /// partial view. If applied to a method, the MVC partial view name is calculated implicitly + /// from the context. Use this attribute for custom wrappers similar to + /// System.Web.Mvc.Html.RenderPartialExtensions.RenderPartial(HtmlHelper, String). + /// + [AttributeUsage(AttributeTargets.Parameter | AttributeTargets.Method)] + public sealed class AspMvcPartialViewAttribute : Attribute { } + + /// + /// ASP.NET MVC attribute. Allows disabling inspections for MVC views within a class or a method. + /// + [AttributeUsage(AttributeTargets.Class | AttributeTargets.Method)] + public sealed class AspMvcSuppressViewErrorAttribute : Attribute { } + + /// + /// ASP.NET MVC attribute. Indicates that a parameter is an MVC display template. + /// Use this attribute for custom wrappers similar to + /// System.Web.Mvc.Html.DisplayExtensions.DisplayForModel(HtmlHelper, String). + /// + [AttributeUsage(AttributeTargets.Parameter)] + public sealed class AspMvcDisplayTemplateAttribute : Attribute { } + + /// + /// ASP.NET MVC attribute. Indicates that a parameter is an MVC editor template. + /// Use this attribute for custom wrappers similar to + /// System.Web.Mvc.Html.EditorExtensions.EditorForModel(HtmlHelper, String). + /// + [AttributeUsage(AttributeTargets.Parameter)] + public sealed class AspMvcEditorTemplateAttribute : Attribute { } + + /// + /// ASP.NET MVC attribute. Indicates that a parameter is an MVC template. + /// Use this attribute for custom wrappers similar to + /// System.ComponentModel.DataAnnotations.UIHintAttribute(System.String). + /// + [AttributeUsage(AttributeTargets.Parameter)] + public sealed class AspMvcTemplateAttribute : Attribute { } + + /// + /// ASP.NET MVC attribute. If applied to a parameter, indicates that the parameter + /// is an MVC view component. If applied to a method, the MVC view name is calculated implicitly + /// from the context. Use this attribute for custom wrappers similar to + /// System.Web.Mvc.Controller.View(Object). + /// + [AttributeUsage(AttributeTargets.Parameter | AttributeTargets.Method)] + public sealed class AspMvcViewAttribute : Attribute { } + + /// + /// ASP.NET MVC attribute. If applied to a parameter, indicates that the parameter + /// is an MVC view component name. + /// + [AttributeUsage(AttributeTargets.Parameter)] + public sealed class AspMvcViewComponentAttribute : Attribute { } + + /// + /// ASP.NET MVC attribute. If applied to a parameter, indicates that the parameter + /// is an MVC view component view. If applied to a method, the MVC view component view name is default. + /// + [AttributeUsage(AttributeTargets.Parameter | AttributeTargets.Method)] + public sealed class AspMvcViewComponentViewAttribute : Attribute { } + + /// + /// ASP.NET MVC attribute. When applied to a parameter of an attribute, + /// indicates that this parameter is an MVC action name. + /// + /// + /// [ActionName("Foo")] + /// public ActionResult Login(string returnUrl) { + /// ViewBag.ReturnUrl = Url.Action("Foo"); // OK + /// return RedirectToAction("Bar"); // Error: Cannot resolve action + /// } + /// + [AttributeUsage(AttributeTargets.Parameter | AttributeTargets.Property)] + public sealed class AspMvcActionSelectorAttribute : Attribute { } + + [AttributeUsage(AttributeTargets.Parameter | AttributeTargets.Property | AttributeTargets.Field)] + public sealed class HtmlElementAttributesAttribute : Attribute + { + public HtmlElementAttributesAttribute() { } + public HtmlElementAttributesAttribute([NotNull] string name) + { + Name = name; + } + + [CanBeNull] public string Name { get; private set; } + } + + [AttributeUsage(AttributeTargets.Parameter | AttributeTargets.Field | AttributeTargets.Property)] + public sealed class HtmlAttributeValueAttribute : Attribute + { + public HtmlAttributeValueAttribute([NotNull] string name) + { + Name = name; + } + + [NotNull] public string Name { get; private set; } + } + + /// + /// Razor attribute. Indicates that a parameter or a method is a Razor section. + /// Use this attribute for custom wrappers similar to + /// System.Web.WebPages.WebPageBase.RenderSection(String). + /// + [AttributeUsage(AttributeTargets.Parameter | AttributeTargets.Method)] + public sealed class RazorSectionAttribute : Attribute { } + + /// + /// Indicates how method, constructor invocation or property access + /// over collection type affects content of the collection. + /// + [AttributeUsage(AttributeTargets.Method | AttributeTargets.Constructor | AttributeTargets.Property)] + public sealed class CollectionAccessAttribute : Attribute + { + public CollectionAccessAttribute(CollectionAccessType collectionAccessType) + { + CollectionAccessType = collectionAccessType; + } + + public CollectionAccessType CollectionAccessType { get; private set; } + } + + [Flags] + public enum CollectionAccessType + { + /// Method does not use or modify content of the collection. + None = 0, + /// Method only reads content of the collection but does not modify it. + Read = 1, + /// Method can change content of the collection but does not add new elements. + ModifyExistingContent = 2, + /// Method can add new elements to the collection. + UpdatedContent = ModifyExistingContent | 4 + } + + /// + /// Indicates that the marked method is assertion method, i.e. it halts control flow if + /// one of the conditions is satisfied. To set the condition, mark one of the parameters with + /// attribute. + /// + [AttributeUsage(AttributeTargets.Method)] + public sealed class AssertionMethodAttribute : Attribute { } + + /// + /// Indicates the condition parameter of the assertion method. The method itself should be + /// marked by attribute. The mandatory argument of + /// the attribute is the assertion type. + /// + [AttributeUsage(AttributeTargets.Parameter)] + public sealed class AssertionConditionAttribute : Attribute + { + public AssertionConditionAttribute(AssertionConditionType conditionType) + { + ConditionType = conditionType; + } + + public AssertionConditionType ConditionType { get; private set; } + } + + /// + /// Specifies assertion type. If the assertion method argument satisfies the condition, + /// then the execution continues. Otherwise, execution is assumed to be halted. + /// + public enum AssertionConditionType + { + /// Marked parameter should be evaluated to true. + IS_TRUE = 0, + /// Marked parameter should be evaluated to false. + IS_FALSE = 1, + /// Marked parameter should be evaluated to null value. + IS_NULL = 2, + /// Marked parameter should be evaluated to not null value. + IS_NOT_NULL = 3, + } + + /// + /// Indicates that the marked method unconditionally terminates control flow execution. + /// For example, it could unconditionally throw exception. + /// + [Obsolete("Use [ContractAnnotation('=> halt')] instead")] + [AttributeUsage(AttributeTargets.Method)] + public sealed class TerminatesProgramAttribute : Attribute { } + + /// + /// Indicates that method is pure LINQ method, with postponed enumeration (like Enumerable.Select, + /// .Where). This annotation allows inference of [InstantHandle] annotation for parameters + /// of delegate type by analyzing LINQ method chains. + /// + [AttributeUsage(AttributeTargets.Method)] + public sealed class LinqTunnelAttribute : Attribute { } + + /// + /// Indicates that IEnumerable, passed as parameter, is not enumerated. + /// + [AttributeUsage(AttributeTargets.Parameter)] + public sealed class NoEnumerationAttribute : Attribute { } + + /// + /// Indicates that parameter is regular expression pattern. + /// + [AttributeUsage(AttributeTargets.Parameter)] + public sealed class RegexPatternAttribute : Attribute { } + + /// + /// XAML attribute. Indicates the type that has ItemsSource property and should be treated + /// as ItemsControl-derived type, to enable inner items DataContext type resolve. + /// + [AttributeUsage(AttributeTargets.Class)] + public sealed class XamlItemsControlAttribute : Attribute { } + + /// + /// XAML attribute. Indicates the property of some BindingBase-derived type, that + /// is used to bind some item of ItemsControl-derived type. This annotation will + /// enable the DataContext type resolve for XAML bindings for such properties. + /// + /// + /// Property should have the tree ancestor of the ItemsControl type or + /// marked with the attribute. + /// + [AttributeUsage(AttributeTargets.Property)] + public sealed class XamlItemBindingOfItemsControlAttribute : Attribute { } + + [AttributeUsage(AttributeTargets.Class, AllowMultiple = true)] + public sealed class AspChildControlTypeAttribute : Attribute + { + public AspChildControlTypeAttribute([NotNull] string tagName, [NotNull] Type controlType) + { + TagName = tagName; + ControlType = controlType; + } + + [NotNull] public string TagName { get; private set; } + [NotNull] public Type ControlType { get; private set; } + } + + [AttributeUsage(AttributeTargets.Property | AttributeTargets.Method)] + public sealed class AspDataFieldAttribute : Attribute { } + + [AttributeUsage(AttributeTargets.Property | AttributeTargets.Method)] + public sealed class AspDataFieldsAttribute : Attribute { } + + [AttributeUsage(AttributeTargets.Property)] + public sealed class AspMethodPropertyAttribute : Attribute { } + + [AttributeUsage(AttributeTargets.Class, AllowMultiple = true)] + public sealed class AspRequiredAttributeAttribute : Attribute + { + public AspRequiredAttributeAttribute([NotNull] string attribute) + { + Attribute = attribute; + } + + [NotNull] public string Attribute { get; private set; } + } + + [AttributeUsage(AttributeTargets.Property)] + public sealed class AspTypePropertyAttribute : Attribute + { + public bool CreateConstructorReferences { get; private set; } + + public AspTypePropertyAttribute(bool createConstructorReferences) + { + CreateConstructorReferences = createConstructorReferences; + } + } + + [AttributeUsage(AttributeTargets.Assembly, AllowMultiple = true)] + public sealed class RazorImportNamespaceAttribute : Attribute + { + public RazorImportNamespaceAttribute([NotNull] string name) + { + Name = name; + } + + [NotNull] public string Name { get; private set; } + } + + [AttributeUsage(AttributeTargets.Assembly, AllowMultiple = true)] + public sealed class RazorInjectionAttribute : Attribute + { + public RazorInjectionAttribute([NotNull] string type, [NotNull] string fieldName) + { + Type = type; + FieldName = fieldName; + } + + [NotNull] public string Type { get; private set; } + [NotNull] public string FieldName { get; private set; } + } + + [AttributeUsage(AttributeTargets.Assembly, AllowMultiple = true)] + public sealed class RazorDirectiveAttribute : Attribute + { + public RazorDirectiveAttribute([NotNull] string directive) + { + Directive = directive; + } + + [NotNull] public string Directive { get; private set; } + } + + [AttributeUsage(AttributeTargets.Method)] + public sealed class RazorHelperCommonAttribute : Attribute { } + + [AttributeUsage(AttributeTargets.Property)] + public sealed class RazorLayoutAttribute : Attribute { } + + [AttributeUsage(AttributeTargets.Method)] + public sealed class RazorWriteLiteralMethodAttribute : Attribute { } + + [AttributeUsage(AttributeTargets.Method)] + public sealed class RazorWriteMethodAttribute : Attribute { } + + [AttributeUsage(AttributeTargets.Parameter)] + public sealed class RazorWriteMethodParameterAttribute : Attribute { } + + /// + /// Prevents the Member Reordering feature from tossing members of the marked class. + /// + /// + /// The attribute must be mentioned in your member reordering patterns + /// + [AttributeUsage(AttributeTargets.All)] + public sealed class NoReorder : Attribute { } +} \ No newline at end of file diff --git a/Befunge/Interpreter/Properties/AssemblyInfo.cs b/Befunge/Interpreter/Properties/AssemblyInfo.cs new file mode 100644 index 0000000..db879a8 --- /dev/null +++ b/Befunge/Interpreter/Properties/AssemblyInfo.cs @@ -0,0 +1,36 @@ +using System.Reflection; +using System.Runtime.CompilerServices; +using System.Runtime.InteropServices; + +// General Information about an assembly is controlled through the following +// set of attributes. Change these attribute values to modify the information +// associated with an assembly. +[assembly: AssemblyTitle("IStepInterpreter")] +[assembly: AssemblyDescription("")] +[assembly: AssemblyConfiguration("")] +[assembly: AssemblyCompany("")] +[assembly: AssemblyProduct("IStepInterpreter")] +[assembly: AssemblyCopyright("Copyright © 2016")] +[assembly: AssemblyTrademark("")] +[assembly: AssemblyCulture("")] + +// Setting ComVisible to false makes the types in this assembly not visible +// to COM components. If you need to access a type in this assembly from +// COM, set the ComVisible attribute to true on that type. +[assembly: ComVisible(false)] + +// The following GUID is for the ID of the typelib if this project is exposed to COM +[assembly: Guid("2f3b583a-9f48-4853-94f2-88953cc6c8ad")] + +// Version information for an assembly consists of the following four values: +// +// Major Version +// Minor Version +// Build Number +// Revision +// +// You can specify all the values or you can default the Build and Revision Numbers +// by using the '*' as shown below: +// [assembly: AssemblyVersion("1.0.*")] +[assembly: AssemblyVersion("1.0.0.0")] +[assembly: AssemblyFileVersion("1.0.0.0")]