From 92c19dae8cfa1bbeeaa447353ac4d7a96e42b330 Mon Sep 17 00:00:00 2001 From: Wilba6582 Date: Mon, 11 Mar 2019 12:41:50 +1100 Subject: [PATCH 001/171] Fixed tap/down/up handling in dynamic keymap macros --- quantum/dynamic_keymap.c | 18 +++++++++++++----- 1 file changed, 13 insertions(+), 5 deletions(-) diff --git a/quantum/dynamic_keymap.c b/quantum/dynamic_keymap.c index 14627a93d6d..53c18a7510b 100644 --- a/quantum/dynamic_keymap.c +++ b/quantum/dynamic_keymap.c @@ -210,19 +210,27 @@ void dynamic_keymap_macro_send( uint8_t id ) ++p; } - // Send the macro string one char at a time - // by making temporary 1 char strings - char data[2] = { 0, 0 }; + // Send the macro string one or two chars at a time + // by making temporary 1 or 2 char strings + char data[3] = { 0, 0, 0 }; // We already checked there was a null at the end of // the buffer, so this cannot go past the end while ( 1 ) { - data[0] = eeprom_read_byte(p); + data[0] = eeprom_read_byte(p++); + data[1] = 0; // Stop at the null terminator of this macro string if ( data[0] == 0 ) { break; } + // If the char is magic (tap, down, up), + // add the next char (key to use) and send a 2 char string. + if ( data[0] == 1 || data[0] == 2 || data[0] == 3 ) { + data[1] = eeprom_read_byte(p++); + if ( data[1] == 0 ) { + break; + } + } send_string(data); - ++p; } } From d15bb05c935e378f2e1e912a46c3114697dd00e4 Mon Sep 17 00:00:00 2001 From: Wilba6582 Date: Sat, 30 Mar 2019 14:24:13 +1100 Subject: [PATCH 002/171] Added SS_TAP_CODE, SS_DOWN_CODE, SS_UP_CODE --- quantum/dynamic_keymap.c | 2 +- quantum/quantum.c | 12 ++++++------ quantum/quantum.h | 4 ++++ 3 files changed, 11 insertions(+), 7 deletions(-) diff --git a/quantum/dynamic_keymap.c b/quantum/dynamic_keymap.c index 53c18a7510b..38400e36f10 100644 --- a/quantum/dynamic_keymap.c +++ b/quantum/dynamic_keymap.c @@ -224,7 +224,7 @@ void dynamic_keymap_macro_send( uint8_t id ) } // If the char is magic (tap, down, up), // add the next char (key to use) and send a 2 char string. - if ( data[0] == 1 || data[0] == 2 || data[0] == 3 ) { + if ( data[0] == SS_TAP_CODE || data[0] == SS_DOWN_CODE || data[0] == SS_UP_CODE ) { data[1] = eeprom_read_byte(p++); if ( data[1] == 0 ) { break; diff --git a/quantum/quantum.c b/quantum/quantum.c index 46d404029f8..96760de87e7 100644 --- a/quantum/quantum.c +++ b/quantum/quantum.c @@ -900,16 +900,16 @@ void send_string_with_delay(const char *str, uint8_t interval) { while (1) { char ascii_code = *str; if (!ascii_code) break; - if (ascii_code == 1) { + if (ascii_code == SS_TAP_CODE) { // tap uint8_t keycode = *(++str); register_code(keycode); unregister_code(keycode); - } else if (ascii_code == 2) { + } else if (ascii_code == SS_DOWN_CODE) { // down uint8_t keycode = *(++str); register_code(keycode); - } else if (ascii_code == 3) { + } else if (ascii_code == SS_UP_CODE) { // up uint8_t keycode = *(++str); unregister_code(keycode); @@ -926,16 +926,16 @@ void send_string_with_delay_P(const char *str, uint8_t interval) { while (1) { char ascii_code = pgm_read_byte(str); if (!ascii_code) break; - if (ascii_code == 1) { + if (ascii_code == SS_TAP_CODE) { // tap uint8_t keycode = pgm_read_byte(++str); register_code(keycode); unregister_code(keycode); - } else if (ascii_code == 2) { + } else if (ascii_code == SS_DOWN_CODE) { // down uint8_t keycode = pgm_read_byte(++str); register_code(keycode); - } else if (ascii_code == 3) { + } else if (ascii_code == SS_UP_CODE) { // up uint8_t keycode = pgm_read_byte(++str); unregister_code(keycode); diff --git a/quantum/quantum.h b/quantum/quantum.h index d2c5862f881..e1e20a7606c 100644 --- a/quantum/quantum.h +++ b/quantum/quantum.h @@ -191,6 +191,10 @@ extern uint32_t default_layer_state; #define ADD_SLASH_X(y) STRINGIZE(\x ## y) #define SYMBOL_STR(x) ADD_SLASH_X(x) +#define SS_TAP_CODE 1 +#define SS_DOWN_CODE 2 +#define SS_UP_CODE 3 + #define SS_TAP(keycode) "\1" SYMBOL_STR(keycode) #define SS_DOWN(keycode) "\2" SYMBOL_STR(keycode) #define SS_UP(keycode) "\3" SYMBOL_STR(keycode) From e6b3bef077d9810c39bc7e7fd70eb52a4600abf5 Mon Sep 17 00:00:00 2001 From: stanrc85 <47038504+stanrc85@users.noreply.github.com> Date: Tue, 2 Apr 2019 12:25:36 -0400 Subject: [PATCH 003/171] Adjusting tapping term --- users/stanrc85/config.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/users/stanrc85/config.h b/users/stanrc85/config.h index 14284435bef..a041db2266d 100644 --- a/users/stanrc85/config.h +++ b/users/stanrc85/config.h @@ -1,6 +1,6 @@ #pragma once -#define TAPPING_TERM 200 +#define TAPPING_TERM 300 #define RETRO_TAPPING #ifdef RGBLIGHT_ENABLE From b23752c840e4bcd4a6476d6956f2909514d0ecf0 Mon Sep 17 00:00:00 2001 From: David Rambo Date: Tue, 2 Apr 2019 14:50:22 -0400 Subject: [PATCH 004/171] [Keymap] Minor update to my XD75 keymap (#5531) * Updated iris, planck, and xd75 keymaps * Added brightness down and up to commented layout of Symbol layer. * updated config files for planck and iris * removed unnecessary include lines from iris and planck config files * updated XD75's PC layer and its NAVPC toggle layer * fixed typo in alias declaration for C_BSPS * changed alias names for BSPC toggle keys --- keyboards/xd75/keymaps/davidrambo/keymap.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) diff --git a/keyboards/xd75/keymaps/davidrambo/keymap.c b/keyboards/xd75/keymaps/davidrambo/keymap.c index a630affe070..7be197a81c7 100644 --- a/keyboards/xd75/keymaps/davidrambo/keymap.c +++ b/keyboards/xd75/keymaps/davidrambo/keymap.c @@ -2,14 +2,14 @@ //aliases for clarity in layering #define A_BSPC LALT(KC_BSPC) // delete whole word in Mac -#define C_BSPS LCTL(KC_BSPC) // delete whole word in PC +#define C_BSPC LCTL(KC_BSPC) // delete whole word in PC #define A_LEFT LALT(KC_LEFT) #define A_RGHT LALT(KC_RGHT) #define C_RGHT LCTL(KC_RGHT) #define C_LEFT LCTL(KC_LEFT) #define SftEnt SFT_T(KC_ENT) -#define GBSPC LGUI_T(KC_BSPC) -#define CBSPC LCTL_T(KC_BSPC) +#define BS_GUI LGUI_T(KC_BSPC) +#define BS_CTL LCTL_T(KC_BSPC) // internet browser tab shortcuts and window/application swapping for Mac and Win #define GSL LGUI(S(KC_LEFT)) // back one tab in Safari @@ -62,7 +62,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { KC_GESC, KC_Q, KC_W, KC_F, KC_P, KC_G, KC_LBRC, KC_BSLS, KC_RBRC, KC_J, KC_L, KC_U, KC_Y, KC_SCLN, KC_BSPC, NAV , KC_A, KC_R, KC_S, KC_T, KC_D, KC_PGUP, KC_ESC , KC_ENT , KC_H, KC_N, KC_E, KC_I, KC_O, KC_QUOT, SftLck , KC_Z, KC_X, KC_C, KC_V, KC_B, KC_PGDN, KC_UP , KC_ENT , KC_K, KC_M, KC_COMM, KC_DOT, KC_SLSH, SftEnt , - KC_DEL , KC_LGUI, KC_LCTL, KC_LALT, KC_LGUI, GBSPC, KC_LEFT, KC_DOWN, KC_RGHT, KC_SPC, MO(3) , KC_RGUI, KC_RALT, KC_RCTL, BL_STEP + KC_DEL , KC_LGUI, KC_LCTL, KC_LALT, KC_LGUI, BS_GUI, KC_LEFT, KC_DOWN, KC_RGHT, KC_SPC, MO(3) , KC_RGUI, KC_RALT, KC_RCTL, BL_STEP ), // Windows Layer: essentially swaps Control and GUI @@ -72,7 +72,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, NAVPC , _______, _______, _______, _______, _______, _______, KC_MPLY, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - _______, KC_LCTL, KC_LGUI, _______, KC_LCTL, _______, _______, _______, _______, _______, _______, KC_RCTL, KC_RALT, KC_RGUI, _______ + _______, KC_LCTL, KC_LGUI, _______, KC_LCTL, BS_CTL , _______, _______, _______, _______, _______, KC_RCTL, KC_RALT, KC_RGUI, _______ ), [_GAME] = LAYOUT_ortho_5x15( /* Gaming Layer */ @@ -118,7 +118,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, C_TAB , C_LEFT, KC_UP, C_RGHT , KC_DEL , _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, CTLPGUP, KC_LEFT, KC_DOWN, KC_RGHT, CTLPGDN, _______, - _______, _______, _______, _______, _______, _______, _______, _______, _______, A_TAB , CBSPC , KC_HOME, KC_END , _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, A_TAB , C_BSPC , KC_HOME, KC_END , _______, _______, RESET , _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ ) }; From 61b2f2b16e92cf63efa1534a1046bed5aab222a0 Mon Sep 17 00:00:00 2001 From: DDRnJn Date: Tue, 2 Apr 2019 14:51:28 -0400 Subject: [PATCH 005/171] Added some new songs (#5525) Added Fantasie Impromptu and Nocturne Op. 9 No. 1 in B flat minor by Chopin Added Isabella's Lullaby from The Promised Neverland Added Renai Circulation and Platinum Disco from Monogatari Added Terra's theme from Final Fantasy 6 --- quantum/audio/song_list.h | 79 +++++++++++++++++++++++++++++++++++++++ 1 file changed, 79 insertions(+) diff --git a/quantum/audio/song_list.h b/quantum/audio/song_list.h index 369e0b48435..1d4eec71168 100644 --- a/quantum/audio/song_list.h +++ b/quantum/audio/song_list.h @@ -713,4 +713,83 @@ H__NOTE(_B5), H__NOTE(_C6), H__NOTE(_E6), H__NOTE(_G6), WD_NOTE(_G6), Q__NOTE(_C6), B__NOTE(_C6), H__NOTE(_B6), \ Q__NOTE(_C7), BD_NOTE(_C7), +#define ISABELLAS_LULLABY \ + W__NOTE(_BF4), B__NOTE(_D5), W__NOTE(_EF5), B__NOTE(_F5), W__NOTE(_BF5), B__NOTE(_AF5), W__NOTE(_GF5), BD_NOTE(_F5), B__NOTE(_CS5), \ + W__NOTE(_F5), B__NOTE(_C5), W__NOTE(_EF5), BD_NOTE(_BF4), W__NOTE(_AF4), W__NOTE(_BF4), W__NOTE(_F5), W__NOTE(_GF5), \ + WD_NOTE(_AF5), H__NOTE(_FS5), W__NOTE(_F5), B__NOTE(_EF5), W__NOTE(_C6), B__NOTE(_AF5), W__NOTE(_F5), WD_NOTE(_AF5), \ + H__NOTE(_BF5), W__NOTE(_F5), WD_NOTE(_AF5), H__NOTE(_BF5), W__NOTE(_F5), W__NOTE(_EF5), W__NOTE(_BF4), W__NOTE(_AF5), \ + WD_NOTE(_F5), H__NOTE(_F5), H__NOTE(_BF5), H__NOTE(_C6), WD_NOTE(_CS6), H__NOTE(_C6), W__NOTE(_BF5), W__NOTE(_AF5), \ + W__NOTE(_F5), W__NOTE(_EF5), WD_NOTE(_EF5), H__NOTE(_DF5), W__NOTE(_AF5), BD_NOTE(_F5), WD_NOTE(_BF4), H__NOTE(_C5), \ + W__NOTE(_CS5), W__NOTE(_EF5), W__NOTE(_AF4), W__NOTE(_EF5), WD_NOTE(_GF5), H__NOTE(_F5), W__NOTE(_EF5), WD_NOTE(_F5), \ + H__NOTE(_F5), H__NOTE(_BF5), H__NOTE(_C6), WD_NOTE(_CS6), H__NOTE(_C6), W__NOTE(_CS6), W__NOTE(_EF6), W__NOTE(_AF5), \ + W__NOTE(_EF6), WD_NOTE(_GF6), H__NOTE(_F6), W__NOTE(_EF6), B__NOTE(_DF6), H__NOTE(_GF6), H__NOTE(_AF6), BD_NOTE(_DF6), \ + B__NOTE(_BF5), W__NOTE(_F6), BD_NOTE(_C6), W__NOTE(_AF5), WD_NOTE(_EF6), H__NOTE(_DF6), W__NOTE(_C6), B__NOTE(_BF5), + +#define FANTASIE_IMPROMPTU \ + E__NOTE(_GS4), E__NOTE(_A4), E__NOTE(_GS4), E__NOTE(_REST), E__NOTE(_GS4), E__NOTE(_CS5), E__NOTE(_E5), E__NOTE(_DS5), E__NOTE(_CS5), \ + E__NOTE(_DS5), E__NOTE(_CS5), E__NOTE(_C5), E__NOTE(_CS5), E__NOTE(_E5), E__NOTE(_GS5), E__NOTE(_GS4), E__NOTE(_A4), \ + E__NOTE(_GS4), E__NOTE(_REST), E__NOTE(_GS4), E__NOTE(_CS5), E__NOTE(_E5), E__NOTE(_DS5), E__NOTE(_CS5), E__NOTE(_DS5), \ + E__NOTE(_CS5), E__NOTE(_C5), E__NOTE(_CS5), E__NOTE(_E5), E__NOTE(_GS5), E__NOTE(_A4), E__NOTE(_CS5), E__NOTE(_DS5), \ + E__NOTE(_FS5), E__NOTE(_A5), E__NOTE(_CS6), E__NOTE(_DS6), E__NOTE(_B6), E__NOTE(_A6), E__NOTE(_GS6), E__NOTE(_FS6), \ + E__NOTE(_E6), E__NOTE(_DS6), E__NOTE(_FS6), E__NOTE(_CS6), E__NOTE(_C5), E__NOTE(_DS6), E__NOTE(_A5), E__NOTE(_GS5), \ + E__NOTE(_FS5), E__NOTE(_A5), E__NOTE(_E5), E__NOTE(_DS5), E__NOTE(_FS5), E__NOTE(_CS5), E__NOTE(_C5), E__NOTE(_DS5), \ + E__NOTE(_A4), E__NOTE(_GS4), E__NOTE(_B4), E__NOTE(_A4), E__NOTE(_A4), E__NOTE(_GS4), E__NOTE(_A4), E__NOTE(_GS4), \ + E__NOTE(_REST), E__NOTE(_GS4), E__NOTE(_CS5), E__NOTE(_E5), E__NOTE(_DS5), E__NOTE(_CS5), E__NOTE(_DS5), E__NOTE(_CS5), \ + E__NOTE(_C5), E__NOTE(_CS5), E__NOTE(_E5), E__NOTE(_GS5), E__NOTE(_GS4), E__NOTE(_AS4), E__NOTE(_GS4), E__NOTE(_REST), \ + E__NOTE(_GS4), E__NOTE(_CS5), E__NOTE(_E5), E__NOTE(_DS5), E__NOTE(_CS5), E__NOTE(_DS5), E__NOTE(_CS5), E__NOTE(_C5), \ + E__NOTE(_CS5), E__NOTE(_E5), E__NOTE(_GS5), E__NOTE(_DS5), E__NOTE(_E5), E__NOTE(_DS5), E__NOTE(_REST), E__NOTE(_DS5), \ + E__NOTE(_B5), E__NOTE(_AS5), E__NOTE(_GS5), E__NOTE(_REST), E__NOTE(_E6), E__NOTE(_DS6), E__NOTE(_CS6), E__NOTE(_B5), \ + E__NOTE(_AS5), E__NOTE(_GS5), E__NOTE(_REST), E__NOTE(_AS5), WD_NOTE(_GS5), + +#define TERRAS_THEME \ + Q__NOTE(_GS5), Q__NOTE(_AS5), Q__NOTE(_B5), Q__NOTE(_EF6), BD_NOTE(_B5), Q__NOTE(_AS5), Q__NOTE(_GS5), W__NOTE(_AS5), \ + BD_NOTE(_DS5), Q__NOTE(_AF5), Q__NOTE(_BF5), Q__NOTE(_B5), Q__NOTE(_DS6), BD_NOTE(_B5), \ + Q__NOTE(_BF5), Q__NOTE(_AF5), W__NOTE(_AS5), BD_NOTE(_DS6), Q__NOTE(_B5), Q__NOTE(_CS6), Q__NOTE(_DS6), \ + Q__NOTE(_FS6), BD_NOTE(_DS6), Q__NOTE(_CS6), Q__NOTE(_B5), W__NOTE(_CS6), BD_NOTE(_FS5), \ + Q__NOTE(_B5), Q__NOTE(_AS5), BD_NOTE(_GS5), Q__NOTE(_B5), Q__NOTE(_AS5), BD_NOTE(_GS5), + +#define RENAI_CIRCULATION \ + Q__NOTE(_E6), Q__NOTE(_B5), HD_NOTE(_CS6), HD_NOTE(_CS6), H__NOTE(_B5), HD_NOTE(_E6), HD_NOTE(_E6), Q__NOTE(_E6), Q__NOTE(_B5), \ + HD_NOTE(_CS6), HD_NOTE(_CS6), H__NOTE(_B5), HD_NOTE(_E6), HD_NOTE(_GS6), Q__NOTE(_E6), Q__NOTE(_B5), HD_NOTE(_CS6), \ + H__NOTE(_CS6), Q__NOTE(_CS6), H__NOTE(_B5), HD_NOTE(_E6), H__NOTE(_E6), Q__NOTE(_E6), H__NOTE(_FS6), HD_NOTE(_E6), \ + H__NOTE(_E6), Q__NOTE(_E6), H__NOTE(_CS6), WD_NOTE(_GS6), HD_NOTE(_E6), H__NOTE(_E6), Q__NOTE(_FS6), H__NOTE(_G6), \ + HD_NOTE(_GS6), HD_NOTE(_E6), Q__NOTE(_B5), Q__NOTE(_CS6), HD_NOTE(_E6), H__NOTE(_E6), Q__NOTE(_FS6), H__NOTE(_G6), \ + HD_NOTE(_GS6), HD_NOTE(_E6), H__NOTE(_CS6), H__NOTE(_E6), Q__NOTE(_CS6), HD_NOTE(_E6), H__NOTE(_CS6), H__NOTE(_E6), \ + Q__NOTE(_CS6), HD_NOTE(_E6), H__NOTE(_E6), Q__NOTE(_A6), H__NOTE(_GS6), HD_NOTE(_E6), H__NOTE(_FS6), WD_NOTE(_E6), \ + H__NOTE(_GS6), H__NOTE(_A6), H__NOTE(_GS6), H__NOTE(_A6), W__NOTE(_B6), H__NOTE(_GS6), H__NOTE(_A6), H__NOTE(_GS6), \ + H__NOTE(_A6), W__NOTE(_B6), H__NOTE(_B6), H__NOTE(_A6), H__NOTE(_GS6), H__NOTE(_A6), Q__NOTE(_GS6), H__NOTE(_E6), \ + H__NOTE(_E6), Q__NOTE(_E6), H__NOTE(_CS6), Q__NOTE(_GS6), H__NOTE(_E6), H__NOTE(_E6), Q__NOTE(_E6), H__NOTE(_CS6), \ + Q__NOTE(_E6), H__NOTE(_E6), H__NOTE(_E6), Q__NOTE(_E6), H__NOTE(_FS6), WD_NOTE(_E6), W__NOTE(_B6), W__NOTE(_GS6), \ + W__NOTE(_FS6), H__NOTE(_GS6), H__NOTE(_GS6), H__NOTE(_FS6), H__NOTE(_E6), H__NOTE(_FS6), B__NOTE(_GS6), H__NOTE(_GS6), \ + W__NOTE(_CS7), W__NOTE(_GS6), W__NOTE(_E6), H__NOTE(_GS6), H__NOTE(_GS6), HD_NOTE(_E6), H__NOTE(_E6), Q__NOTE(_E6), \ + H__NOTE(_FS6), WD_NOTE(_E6), + +#define PLATINUM_DISCO \ + H__NOTE(_DS6), H__NOTE(_FS6), H__NOTE(_GS6), H__NOTE(_AS6), H__NOTE(_DS6), H__NOTE(_FS6), W__NOTE(_GS6), H__NOTE(_DS6), H__NOTE(_FS6), \ + H__NOTE(_GS6), H__NOTE(_AS6), H__NOTE(_CS6), H__NOTE(_FS6), WD_NOTE(_FS6), H__NOTE(_CS6), W__NOTE(_DS6), H__NOTE(_FS6), \ + H__NOTE(_AS6), W__NOTE(_GS6), H__NOTE(_FS6), H__NOTE(_GS6), Q__NOTE(_AS6), Q__NOTE(_CS7), Q__NOTE(_GS6), Q__NOTE(_AS6), \ + Q__NOTE(_FS6), Q__NOTE(_GS6), Q__NOTE(_DS6), Q__NOTE(_FS6), Q__NOTE(_CS6), Q__NOTE(_DS6), Q__NOTE(_AS5), Q__NOTE(_CS6), \ + H__NOTE(_DS6), H__NOTE(_FS6), H__NOTE(_GS6), H__NOTE(_AS6), H__NOTE(_DS6), H__NOTE(_FS6), W__NOTE(_GS6), H__NOTE(_DS6), \ + H__NOTE(_FS6), H__NOTE(_GS6), H__NOTE(_AS6), H__NOTE(_CS7), H__NOTE(_GS6), WD_NOTE(_FS6), H__NOTE(_CS6), W__NOTE(_DS6), \ + H__NOTE(_FS6), H__NOTE(_AS6), WD_NOTE(_GS6), H__NOTE(_FS6), Q__NOTE(_FS6), Q__NOTE(_GS5), Q__NOTE(_AS5), Q__NOTE(_CS6), \ + Q__NOTE(_FS6), Q__NOTE(_GS6), Q__NOTE(_AS6), Q__NOTE(_CS7), WD_NOTE(_FS7), H__NOTE(_CS6), WD_NOTE(_DS6), H__NOTE(_CS6), \ + WD_NOTE(_DS6), H__NOTE(_CS6), H__NOTE(_DS6), H__NOTE(_FS6), H__NOTE(_GS6), H__NOTE(_AS6), WD_NOTE(_GS6), H__NOTE(_FS6), \ + WD_NOTE(_GS6), H__NOTE(_FS6), WD_NOTE(_GS6), H__NOTE(_FS6), H__NOTE(_GS6), H__NOTE(_AS6), H__NOTE(_DS6), H__NOTE(_FS6), \ + WD_NOTE(_FS6), H__NOTE(_CS6), WD_NOTE(_DS6), H__NOTE(_CS6), WD_NOTE(_DS6), H__NOTE(_CS6), H__NOTE(_DS6), H__NOTE(_FS6), \ + H__NOTE(_GS6), H__NOTE(_AS6), H__NOTE(_CS7), H__NOTE(_AS6), H__NOTE(_GS6), H__NOTE(_FS6), H__NOTE(_DS6), W__NOTE(_FS6), \ + H__NOTE(_CS6), H__NOTE(_DS6), W__NOTE(_FS6), H__NOTE(_FS6), H__NOTE(_GS6), H__NOTE(_FS6), H__NOTE(_GS6), H__NOTE(_FS6), \ + B__NOTE(_FS6), + +#define NOCTURNE_OP_9_NO_1 \ + H__NOTE(_BF5), H__NOTE(_C6), H__NOTE(_DF6), H__NOTE(_A5), H__NOTE(_BF5), H__NOTE(_GF5), W__NOTE(_F5), W__NOTE(_F5), W__NOTE(_F5), \ + W__NOTE(_F5), H__NOTE(_GF5), H__NOTE(_F5), H__NOTE(_EF5), H__NOTE(_C5), B__NOTE(_DF5), W__NOTE(_BF4), Q__NOTE(_BF5), \ + Q__NOTE(_C6), Q__NOTE(_DF6), Q__NOTE(_A5), Q__NOTE(_BF5), Q__NOTE(_A5), Q__NOTE(_GS5), Q__NOTE(_A5), Q__NOTE(_C6), \ + Q__NOTE(_BF5), Q__NOTE(_GF5), Q__NOTE(_F5), Q__NOTE(_GF5), Q__NOTE(_E5), Q__NOTE(_F5), Q__NOTE(_BF5), Q__NOTE(_A5), \ + Q__NOTE(_AF5), Q__NOTE(_G5), Q__NOTE(_GF5), Q__NOTE(_F5), Q__NOTE(_E5), Q__NOTE(_EF5), Q__NOTE(_D5), Q__NOTE(_DF5), \ + Q__NOTE(_C5), Q__NOTE(_DF5), Q__NOTE(_C5), Q__NOTE(_B4), Q__NOTE(_C5), Q__NOTE(_F5), Q__NOTE(_E5), Q__NOTE(_EF5), \ + B__NOTE(_DF5), W__NOTE(_BF4), W__NOTE(_BF5), W__NOTE(_BF5), W__NOTE(_BF5), BD_NOTE(_AF5), W__NOTE(_DF5), H__NOTE(_BF4), \ + H__NOTE(_C5), H__NOTE(_DF5), H__NOTE(_GF5), H__NOTE(_GF5), BD_NOTE(_F5), W__NOTE(_EF5), H__NOTE(_F5), H__NOTE(_EF5), \ + H__NOTE(_DF5), H__NOTE(_A4), B__NOTE(_AF4), W__NOTE(_DF5), W__NOTE(_EF5), H__NOTE(_F5), H__NOTE(_EF5), H__NOTE(_DF5), \ + H__NOTE(_EF5), BD_NOTE(_F5), + #endif From 68d8bb2b3fb8a35fda164539d27754b3f74e0819 Mon Sep 17 00:00:00 2001 From: Jack Date: Tue, 2 Apr 2019 18:13:08 -0500 Subject: [PATCH 006/171] [Keyboard] Add handwired keyboard "Tennie" (#5507) * Add tennie * Jacobs Functions * Switch back to normal layout * Remove define from old template * Fix broken keymaps * Correct style errors, add bootlite * Update readmes. Rename test keymap * Missed comma * Switch rgb from init to post init --- keyboards/handwired/tennie/config.h | 240 ++++++++++++++++++ keyboards/handwired/tennie/info.json | 12 + .../handwired/tennie/keymaps/default/config.h | 19 ++ .../handwired/tennie/keymaps/default/keymap.c | 95 +++++++ .../tennie/keymaps/default/readme.md | 68 +++++ .../tennie/keymaps/simple-numbpad/config.h | 19 ++ .../tennie/keymaps/simple-numbpad/keymap.c | 37 +++ .../tennie/keymaps/simple-numbpad/readme.md | 18 ++ .../tennie/keymaps/soundboard/config.h | 19 ++ .../tennie/keymaps/soundboard/keymap.c | 37 +++ .../tennie/keymaps/soundboard/readme.md | 19 ++ keyboards/handwired/tennie/readme.md | 15 ++ keyboards/handwired/tennie/rules.mk | 80 ++++++ keyboards/handwired/tennie/tennie.c | 45 ++++ keyboards/handwired/tennie/tennie.h | 37 +++ 15 files changed, 760 insertions(+) create mode 100644 keyboards/handwired/tennie/config.h create mode 100644 keyboards/handwired/tennie/info.json create mode 100644 keyboards/handwired/tennie/keymaps/default/config.h create mode 100644 keyboards/handwired/tennie/keymaps/default/keymap.c create mode 100644 keyboards/handwired/tennie/keymaps/default/readme.md create mode 100644 keyboards/handwired/tennie/keymaps/simple-numbpad/config.h create mode 100644 keyboards/handwired/tennie/keymaps/simple-numbpad/keymap.c create mode 100644 keyboards/handwired/tennie/keymaps/simple-numbpad/readme.md create mode 100644 keyboards/handwired/tennie/keymaps/soundboard/config.h create mode 100644 keyboards/handwired/tennie/keymaps/soundboard/keymap.c create mode 100644 keyboards/handwired/tennie/keymaps/soundboard/readme.md create mode 100644 keyboards/handwired/tennie/readme.md create mode 100644 keyboards/handwired/tennie/rules.mk create mode 100644 keyboards/handwired/tennie/tennie.c create mode 100644 keyboards/handwired/tennie/tennie.h diff --git a/keyboards/handwired/tennie/config.h b/keyboards/handwired/tennie/config.h new file mode 100644 index 00000000000..b50886cdc80 --- /dev/null +++ b/keyboards/handwired/tennie/config.h @@ -0,0 +1,240 @@ +/* +Copyright 2018 Jack Hildebrandt + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#pragma once + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0x1EEE +#define PRODUCT_ID 0x1313 +#define DEVICE_VER 0x0001 +#define MANUFACTURER Jsck +#define PRODUCT Tennie +#define DESCRIPTION Ten key macropad + +/* key matrix size */ +#define MATRIX_ROWS 3 +#define MATRIX_COLS 4 + +/* + * Keyboard Matrix Assignments + * + * Change this to how you wired your keyboard + * COLS: AVR pins used for columns, left to right + * ROWS: AVR pins used for rows, top to bottom + * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) + * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) + * +*/ +#define MATRIX_ROW_PINS { C6, D4, D0} +#define MATRIX_COL_PINS { D7, E6, B4, B5 } +#define UNUSED_PINS { B1, B2, B3, B6, F4, F5, F6, F7 D1} + +/* COL2ROW, ROW2COL, or CUSTOM_MATRIX */ +#define DIODE_DIRECTION COL2ROW + +/* + * Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN. + */ +//#define SOFT_SERIAL_PIN D0 // or D1, D2, D3, E6 + +// #define BACKLIGHT_PIN B7 +// #define BACKLIGHT_BREATHING +// #define BACKLIGHT_LEVELS 3 +#define RGBW +#define RGB_DI_PIN D1 +#ifdef RGB_DI_PIN + #define RGBLED_NUM 1 + #define RGBLIGHT_HUE_STEP 8 + #define RGBLIGHT_SAT_STEP 8 + #define RGBLIGHT_VAL_STEP 8 + #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */ +// #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ +// /*== all animations enable ==*/ + #define RGBLIGHT_ANIMATIONS +// /*== or choose animations ==*/ +// #define RGBLIGHT_EFFECT_BREATHING +// #define RGBLIGHT_EFFECT_RAINBOW_MOOD +// #define RGBLIGHT_EFFECT_RAINBOW_SWIRL +// #define RGBLIGHT_EFFECT_SNAKE +// #define RGBLIGHT_EFFECT_KNIGHT +// #define RGBLIGHT_EFFECT_CHRISTMAS +// #define RGBLIGHT_EFFECT_STATIC_GRADIENT +// #define RGBLIGHT_EFFECT_RGB_TEST +// #define RGBLIGHT_EFFECT_ALTERNATING +#endif + +/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ +#define DEBOUNCING_DELAY 5 + +/* define if matrix has ghost (lacks anti-ghosting diodes) */ +//#define MATRIX_HAS_GHOST + +/* number of backlight levels */ + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +#define LOCKING_SUPPORT_ENABLE +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE + +/* If defined, GRAVE_ESC will always act as ESC when CTRL is held. + * This is userful for the Windows task manager shortcut (ctrl+shift+esc). + */ +// #define GRAVE_ESC_CTRL_OVERRIDE + +/* + * Force NKRO + * + * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved + * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the + * makefile for this to work.) + * + * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) + * until the next keyboard reset. + * + * NKRO may prevent your keystrokes from being detected in the BIOS, but it is + * fully operational during normal computer usage. + * + * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) + * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by + * bootmagic, NKRO mode will always be enabled until it is toggled again during a + * power-up. + * + */ +//#define FORCE_NKRO + +/* + * Magic Key Options + * + * Magic keys are hotkey commands that allow control over firmware functions of + * the keyboard. They are best used in combination with the HID Listen program, + * found here: https://www.pjrc.com/teensy/hid_listen.html + * + * The options below allow the magic key functionality to be changed. This is + * useful if your keyboard/keypad is missing keys and you want magic key support. + * + */ + +/* control how magic key switches layers */ +//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true +//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true +//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false + +/* override magic key keymap */ +//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS +//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS +//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM +//#define MAGIC_KEY_HELP1 H +//#define MAGIC_KEY_HELP2 SLASH +//#define MAGIC_KEY_DEBUG D +//#define MAGIC_KEY_DEBUG_MATRIX X +//#define MAGIC_KEY_DEBUG_KBD K +//#define MAGIC_KEY_DEBUG_MOUSE M +//#define MAGIC_KEY_VERSION V +//#define MAGIC_KEY_STATUS S +//#define MAGIC_KEY_CONSOLE C +//#define MAGIC_KEY_LAYER0_ALT1 ESC +//#define MAGIC_KEY_LAYER0_ALT2 GRAVE +//#define MAGIC_KEY_LAYER0 0 +//#define MAGIC_KEY_LAYER1 1 +//#define MAGIC_KEY_LAYER2 2 +//#define MAGIC_KEY_LAYER3 3 +//#define MAGIC_KEY_LAYER4 4 +//#define MAGIC_KEY_LAYER5 5 +//#define MAGIC_KEY_LAYER6 6 +//#define MAGIC_KEY_LAYER7 7 +//#define MAGIC_KEY_LAYER8 8 +//#define MAGIC_KEY_LAYER9 9 +//#define MAGIC_KEY_BOOTLOADER PAUSE +//#define MAGIC_KEY_LOCK CAPS +//#define MAGIC_KEY_EEPROM E +//#define MAGIC_KEY_NKRO N +//#define MAGIC_KEY_SLEEP_LED Z + +/* + * Feature disable options + * These options are also useful to firmware size reduction. + */ + +/* disable debug print */ +//#define NO_DEBUG + +/* disable print */ +//#define NO_PRINT + +/* disable action features */ +//#define NO_ACTION_LAYER +//#define NO_ACTION_TAPPING +//#define NO_ACTION_ONESHOT +//#define NO_ACTION_MACRO +//#define NO_ACTION_FUNCTION + +/* + * MIDI options + */ + +/* Prevent use of disabled MIDI features in the keymap */ +//#define MIDI_ENABLE_STRICT 1 + +/* enable basic MIDI features: + - MIDI notes can be sent when in Music mode is on +*/ +//#define MIDI_BASIC + +/* enable advanced MIDI features: + - MIDI notes can be added to the keymap + - Octave shift and transpose + - Virtual sustain, portamento, and modulation wheel + - etc. +*/ +//#define MIDI_ADVANCED + +/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */ +//#define MIDI_TONE_KEYCODE_OCTAVES 1 + +/* + * HD44780 LCD Display Configuration + */ +/* +#define LCD_LINES 2 //< number of visible lines of the display +#define LCD_DISP_LENGTH 16 //< visibles characters per line of the display + +#define LCD_IO_MODE 1 //< 0: memory mapped mode, 1: IO port mode + +#if LCD_IO_MODE +#define LCD_PORT PORTB //< port for the LCD lines +#define LCD_DATA0_PORT LCD_PORT //< port for 4bit data bit 0 +#define LCD_DATA1_PORT LCD_PORT //< port for 4bit data bit 1 +#define LCD_DATA2_PORT LCD_PORT //< port for 4bit data bit 2 +#define LCD_DATA3_PORT LCD_PORT //< port for 4bit data bit 3 +#define LCD_DATA0_PIN 4 //< pin for 4bit data bit 0 +#define LCD_DATA1_PIN 5 //< pin for 4bit data bit 1 +#define LCD_DATA2_PIN 6 //< pin for 4bit data bit 2 +#define LCD_DATA3_PIN 7 //< pin for 4bit data bit 3 +#define LCD_RS_PORT LCD_PORT //< port for RS line +#define LCD_RS_PIN 3 //< pin for RS line +#define LCD_RW_PORT LCD_PORT //< port for RW line +#define LCD_RW_PIN 2 //< pin for RW line +#define LCD_E_PORT LCD_PORT //< port for Enable line +#define LCD_E_PIN 1 //< pin for Enable line +#endif +*/ + +/* Bootmagic Lite key configuration */ +//#define BOOTMAGIC_LITE_ROW 0 +//#define BOOTMAGIC_LITE_COLUMN 0 diff --git a/keyboards/handwired/tennie/info.json b/keyboards/handwired/tennie/info.json new file mode 100644 index 00000000000..c0369979291 --- /dev/null +++ b/keyboards/handwired/tennie/info.json @@ -0,0 +1,12 @@ +{ + "keyboard_name": "Tennie", + "url": "https://github.com/StoutIEEE/macropad-workshop", + "maintainer": "UW Stout IEEE, Jack Hildebrandt (onemorebyte)", + "width": 4, + "height": 3, + "layouts": { + "LAYOUT": { + "layout": [{"x":0.5, "y":0}, {"x":1.5, "y":0}, {"x":2.5, "y":0}, {"x":0, "y":1}, {"x":1, "y":1}, {"x":2, "y":1}, {"x":3, "y":1}, {"x":0.5, "y":2}, {"x":1.5, "y":2}, {"x":2.5, "y":2}] + } + } +} diff --git a/keyboards/handwired/tennie/keymaps/default/config.h b/keyboards/handwired/tennie/keymaps/default/config.h new file mode 100644 index 00000000000..4496c591006 --- /dev/null +++ b/keyboards/handwired/tennie/keymaps/default/config.h @@ -0,0 +1,19 @@ +/* Copyright 2018 REPLACE_WITH_YOUR_NAME + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#pragma once + +// place overrides here diff --git a/keyboards/handwired/tennie/keymaps/default/keymap.c b/keyboards/handwired/tennie/keymaps/default/keymap.c new file mode 100644 index 00000000000..3736841cbb9 --- /dev/null +++ b/keyboards/handwired/tennie/keymaps/default/keymap.c @@ -0,0 +1,95 @@ +/* Copyright 2018 Jack H. + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ +#include QMK_KEYBOARD_H + +#define TAPPING_TOGGLE 2 + + +// Layer names +#define base 0 +#define shrek 1 +#define ogre 2 +#define tcp 3 + +// Layer Switches +#define KC_SHRK TT(shrek) +#define KC_OGRE TT(ogre) +#define KC_TCP TT(tcp) + + + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [base] = LAYOUT( + // ┌────────┬────────┬────────┐ + + KC_DEL, KC_SPC, KC_ENT, + + // ├────────┼────────┼────────┼────────┼ + + KC_LEFT, KC_DOWN, KC_UP , KC_RGHT, + + // ├────────┼────────┼────────┼────────┼ + + KC_SHRK, KC_OGRE, KC_TCP + + // └────────┴────────┴────────┘ + ), + [shrek] = LAYOUT( + // ┌────────┬────────┬────────┐ + + KC_MPRV, KC_MPLY, KC_MNXT, + + // ├────────┼────────┼────────┼────────┼ + + KC_BRID, KC_VOLD, KC_VOLU, KC_BRIU, + + // ├────────┼────────┼────────┼────────┼ + + _______, _______, _______ + + // └────────┴────────┴────────┘ + ), + [ogre] = LAYOUT( + // ┌────────┬────────┬────────┐ + + RGB_MOD, RGB_TOG, RGB_RMOD, + + // ├────────┼────────┼────────┼────────┼ + + KC_F13, KC_F14, KC_F15, KC_F16, + + // ├────────┼────────┼────────┼────────┼ + + _______, _______, _______ + + // └────────┴────────┴────────┘ + ), + [tcp] = LAYOUT( + // ┌────────┬────────┬────────┐ + + KC_WBAK, KC_WREF, KC_WFWD, + + // ├────────┼────────┼────────┼────────┼ + + XXXXXXX, KC_PGDN, KC_PGUP, XXXXXXX, + + // ├────────┼────────┼────────┼────────┼ + + _______, _______, _______ + + // └────────┴────────┴────────┘ + ), +}; diff --git a/keyboards/handwired/tennie/keymaps/default/readme.md b/keyboards/handwired/tennie/keymaps/default/readme.md new file mode 100644 index 00000000000..1fbaa7f4635 --- /dev/null +++ b/keyboards/handwired/tennie/keymaps/default/readme.md @@ -0,0 +1,68 @@ +# Default keymap + +This keymap is to serve as an example of how you could make a multi-layer keymap. + +#### keymap + +``` +[base] = LAYOUT_kc( +// ┌────────┬────────┬────────┐ + + DEL , SPC , ENT , + +// ├────────┼────────┼────────┼────────┼ + + LEFT , DOWN , UP , RGHT , + +// ├────────┼────────┼────────┼────────┼ + + SHRK , OGRE , TCP + +// └────────┴────────┴────────┘ +), +[shrek] = LAYOUT_kc( +// ┌────────┬────────┬────────┐ + + MPRV , MPLY , MNXT , + +// ├────────┼────────┼────────┼────────┼ + + BRID , VOLD , VOLU , BRIU , + +// ├────────┼────────┼────────┼────────┼ + + _______, _______, _______ + +// └────────┴────────┴────────┘ +), +[ogre] = LAYOUT_kc( +// ┌────────┬────────┬────────┐ + + RGB_MOD, RGB_TOG, RGB_RMOD + +// ├────────┼────────┼────────┼────────┼ + + F13 , F14 , F15 , F16 , + +// ├────────┼────────┼────────┼────────┼ + + _______, _______, _______ + +// └────────┴────────┴────────┘ +), +[tcp] = LAYOUT_kc( +// ┌────────┬────────┬────────┐ + + WBAK , WREF , WFWD , + +// ├────────┼────────┼────────┼────────┼ + + XXXXXXX , PGDN , PGUP , XXXXXXX , + +// ├────────┼────────┼────────┼────────┼ + + _______, _______, _______ + +// └────────┴────────┴────────┘ +), +``` diff --git a/keyboards/handwired/tennie/keymaps/simple-numbpad/config.h b/keyboards/handwired/tennie/keymaps/simple-numbpad/config.h new file mode 100644 index 00000000000..a3c309bb290 --- /dev/null +++ b/keyboards/handwired/tennie/keymaps/simple-numbpad/config.h @@ -0,0 +1,19 @@ +/* Copyright 2018 Jack Hildebrandt + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#pragma once + +// place overrides here diff --git a/keyboards/handwired/tennie/keymaps/simple-numbpad/keymap.c b/keyboards/handwired/tennie/keymaps/simple-numbpad/keymap.c new file mode 100644 index 00000000000..7cf29b11889 --- /dev/null +++ b/keyboards/handwired/tennie/keymaps/simple-numbpad/keymap.c @@ -0,0 +1,37 @@ +/* Copyright 2018 Jack Hildebrandt + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ +#include QMK_KEYBOARD_H + +// Layer names +#define base 0 + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [base] = LAYOUT( + // ┌────────┬────────┬────────┐ + + KC_1 , KC_2 , KC_3 , + + // ├────────┼────────┼────────┼────────┼ + + KC_4 , KC_5 , KC_6 , KC_7 , + + // ├────────┼────────┼────────┼────────┼ + + KC_8 , KC_9 , KC_0 + + // └────────┴────────┴────────┘ + ), +}; diff --git a/keyboards/handwired/tennie/keymaps/simple-numbpad/readme.md b/keyboards/handwired/tennie/keymaps/simple-numbpad/readme.md new file mode 100644 index 00000000000..0b3f3075016 --- /dev/null +++ b/keyboards/handwired/tennie/keymaps/simple-numbpad/readme.md @@ -0,0 +1,18 @@ +# Simple numberpad keymap + +This keymap is to test the soldering work of workshop participants. It can also be used as a simple base for a macropad keymap. +``` +// ┌────────┬────────┬────────┐ + + 1 , 2 , 3 , + +// ├────────┼────────┼────────┼────────┼ + + 4 , 5 , 6 , 7 , + +// ├────────┼────────┼────────┼────────┼ + + 8 , 9 , 0 + +// └────────┴────────┴────────┘ +``` diff --git a/keyboards/handwired/tennie/keymaps/soundboard/config.h b/keyboards/handwired/tennie/keymaps/soundboard/config.h new file mode 100644 index 00000000000..5a1cba7b404 --- /dev/null +++ b/keyboards/handwired/tennie/keymaps/soundboard/config.h @@ -0,0 +1,19 @@ +/* Copyright 2018 Jacob Hillebrand + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#pragma once + +// place overrides here diff --git a/keyboards/handwired/tennie/keymaps/soundboard/keymap.c b/keyboards/handwired/tennie/keymaps/soundboard/keymap.c new file mode 100644 index 00000000000..3bceb1feac9 --- /dev/null +++ b/keyboards/handwired/tennie/keymaps/soundboard/keymap.c @@ -0,0 +1,37 @@ +/* Copyright 2018 Jacob Hillebrand + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ +#include QMK_KEYBOARD_H + +// Layer names +#define base 0 + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [base] = LAYOUT( + // ┌────────┬────────┬────────┐ + + KC_F13 , KC_F14 , KC_F15 , + + // ├────────┼────────┼────────┼────────┼ + + KC_F16 , KC_F17 , KC_F18 , KC_F19 , + + // ├────────┼────────┼────────┼────────┼ + + KC_F20, KC_F21 , KC_F22 + + // └────────┴────────┴────────┘ + ), +}; diff --git a/keyboards/handwired/tennie/keymaps/soundboard/readme.md b/keyboards/handwired/tennie/keymaps/soundboard/readme.md new file mode 100644 index 00000000000..d05b7117c16 --- /dev/null +++ b/keyboards/handwired/tennie/keymaps/soundboard/readme.md @@ -0,0 +1,19 @@ +# Soundboard keymap + +This keymap binds all keys to function keys 13-22 for something like a +soundboard (ie:[Resanance](https://www.reddit.com/r/discordapp/comments/44ldc1/soundboard_for_discord/)) +``` +// ┌────────┬────────┬────────┐ + + F13 , F14 , F15 , + +// ├────────┼────────┼────────┼────────┼ + + F16 , F17 , F18 , F19 , + +// ├────────┼────────┼────────┼────────┼ + + F20 , F21 , F22 + +// └────────┴────────┴────────┘ +``` diff --git a/keyboards/handwired/tennie/readme.md b/keyboards/handwired/tennie/readme.md new file mode 100644 index 00000000000..bbdbc2b6011 --- /dev/null +++ b/keyboards/handwired/tennie/readme.md @@ -0,0 +1,15 @@ +# Tennie + +![tennie](https://raw.githubusercontent.com/StoutIEEE/macropad-workshop/master/images/macropad.jpg) + +A ten key macropad for a club workshop! More information, and build instructions can be found [here](https://github.com/StoutIEEE/macropad-workshop) + +Keyboard Maintainer: [Jack Hildebrandt](https://github.com/onemorebyte), [UW Stout IEEE](https://github.com/StoutIEEE) + +Hardware Supported: ProMicro + +Make example for this keyboard (after setting up your build environment): + + make handwired/tennie:default + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/handwired/tennie/rules.mk b/keyboards/handwired/tennie/rules.mk new file mode 100644 index 00000000000..0119dc6fb2f --- /dev/null +++ b/keyboards/handwired/tennie/rules.mk @@ -0,0 +1,80 @@ +# MCU name +MCU = atmega32u4 + +# Processor frequency. +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to +# calculate timings. Do NOT tack on a 'UL' at the end, this will be done +# automatically to create a 32-bit value in your source code. +# +# This will be an integer division of F_USB below, as it is sourced by +# F_USB after it has run through any CPU prescalers. Note that this value +# does not *change* the processor frequency - it should merely be updated to +# reflect the processor speed set externally so that the code can use accurate +# software delays. +F_CPU = 16000000 + + +# +# LUFA specific +# +# Target architecture (see library "Board Types" documentation). +ARCH = AVR8 + +# Input clock frequency. +# This will define a symbol, F_USB, in all source code files equal to the +# input clock frequency (before any prescaling is performed) in Hz. This value may +# differ from F_CPU if prescaling is used on the latter, and is required as the +# raw input clock is fed directly to the PLL sections of the AVR for high speed +# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' +# at the end, this will be done automatically to create a 32-bit value in your +# source code. +# +# If no clock division is performed on the input clock inside the AVR (via the +# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. +F_USB = $(F_CPU) + +# Interrupt driven control endpoint task(+60) +OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT + + +# Bootloader selection +# Teensy halfkay +# Pro Micro caterina +# Atmel DFU atmel-dfu +# LUFA DFU lufa-dfu +# QMK DFU qmk-dfu +# atmega32a bootloadHID +BOOTLOADER = caterina + + +# If you don't know the bootloader type, then you can specify the +# Boot Section Size in *bytes* by uncommenting out the OPT_DEFS line +# Teensy halfKay 512 +# Teensy++ halfKay 1024 +# Atmel DFU loader 4096 +# LUFA bootloader 4096 +# USBaspLoader 2048 +# OPT_DEFS += -DBOOTLOADER_SIZE=4096 + + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = yes # Mouse keys(+4700) +EXTRAKEY_ENABLE = yes # Audio control and System control(+450) +CONSOLE_ENABLE = no # Console for debug(+400) +COMMAND_ENABLE = yes # Commands for debug and configuration +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend +# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +NKRO_ENABLE = no # USB Nkey Rollover +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default +RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow +MIDI_ENABLE = no # MIDI support (+2400 to 4200, depending on config) +UNICODE_ENABLE = no # Unicode +BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID +AUDIO_ENABLE = no # Audio output on port C6 +FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches +HD44780_ENABLE = no # Enable support for HD44780 based LCDs (+400) diff --git a/keyboards/handwired/tennie/tennie.c b/keyboards/handwired/tennie/tennie.c new file mode 100644 index 00000000000..e1ceaf153d7 --- /dev/null +++ b/keyboards/handwired/tennie/tennie.c @@ -0,0 +1,45 @@ +/* Copyright 2018 Jack Hildebrandt + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ +#include "tennie.h" + +void matrix_init_kb(void) { + matrix_init_user(); +} + +void matrix_post_init(void) { + rgblight_enable_noeeprom(); + keyboard_post_init_user(); +} + +void matrix_scan_kb(void) { + // put your looping keyboard code here + // runs every cycle (a lot) + + matrix_scan_user(); +} + +bool process_record_kb(uint16_t keycode, keyrecord_t *record) { + // put your per-action keyboard code here + // runs for every action, just before processing by the firmware + + return process_record_user(keycode, record); +} + +//void led_set_kb(uint8_t usb_led) { + // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here + +// led_set_user(usb_led); +//} diff --git a/keyboards/handwired/tennie/tennie.h b/keyboards/handwired/tennie/tennie.h new file mode 100644 index 00000000000..8ab0d04c528 --- /dev/null +++ b/keyboards/handwired/tennie/tennie.h @@ -0,0 +1,37 @@ +/* Copyright 2018 Jack Hildebrandt + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ +#pragma once + +#include "quantum.h" + +/* This a shortcut to help you visually see your layout. + * + * The first section contains all of the arguments representing the physical + * layout of the board and position of the keys. + * + * The second converts the arguments into a two-dimensional array which + * represents the switch matrix. + */ +#define LAYOUT( \ + K00, K01, K02, \ + K10, K11, K12, K13, \ + K20, K21, K22 \ +) \ +{ \ + { K00, K01, K02, KC_NO }, \ + { K10, K11, K12, K13 }, \ + { K20, K21, K22, KC_NO }, \ +} From 813d79bac6ff168ea13bf073a28744542a08a59e Mon Sep 17 00:00:00 2001 From: stanrc85 <47038504+stanrc85@users.noreply.github.com> Date: Tue, 2 Apr 2019 19:56:11 -0400 Subject: [PATCH 007/171] Use modified rgb_backlight.c file --- keyboards/hs60/v2/keymaps/stanrc85/rules.mk | 1 - users/stanrc85/rules.mk | 4 ++++ 2 files changed, 4 insertions(+), 1 deletion(-) diff --git a/keyboards/hs60/v2/keymaps/stanrc85/rules.mk b/keyboards/hs60/v2/keymaps/stanrc85/rules.mk index a2850a83057..e0c9ead8dd4 100644 --- a/keyboards/hs60/v2/keymaps/stanrc85/rules.mk +++ b/keyboards/hs60/v2/keymaps/stanrc85/rules.mk @@ -1,6 +1,5 @@ # project specific files SRC = keyboards/zeal60/zeal60.c \ - keyboards/zeal60/rgb_backlight.c \ drivers/issi/is31fl3733.c \ quantum/color.c \ drivers/arm/i2c_master.c diff --git a/users/stanrc85/rules.mk b/users/stanrc85/rules.mk index 4b66f9692db..83e9cb6e42a 100644 --- a/users/stanrc85/rules.mk +++ b/users/stanrc85/rules.mk @@ -14,3 +14,7 @@ ifeq ($(strip $(RGBLIGHT_ENABLE)), yes) # Include my fancy rgb functions source here SRC += layer_rgb.c endif + +ifeq ($(strip $(KEYBOARD)), hs60/v2) + SRC += rgb_backlight.c +endif From 387ede9e6b3a9309a0329e6108443fa4a27a48bc Mon Sep 17 00:00:00 2001 From: stanrc85 <47038504+stanrc85@users.noreply.github.com> Date: Tue, 2 Apr 2019 19:56:28 -0400 Subject: [PATCH 008/171] Tweaking tapping_term value --- users/stanrc85/config.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/users/stanrc85/config.h b/users/stanrc85/config.h index a041db2266d..42306727ceb 100644 --- a/users/stanrc85/config.h +++ b/users/stanrc85/config.h @@ -1,6 +1,6 @@ #pragma once -#define TAPPING_TERM 300 +#define TAPPING_TERM 250 #define RETRO_TAPPING #ifdef RGBLIGHT_ENABLE From 3cfa24c6848980965996f76a0dba552f4d9c906d Mon Sep 17 00:00:00 2001 From: stanrc85 <47038504+stanrc85@users.noreply.github.com> Date: Tue, 2 Apr 2019 19:57:22 -0400 Subject: [PATCH 009/171] Adding zeal60 rgb files with modifications --- users/stanrc85/rgb_backlight.c | 1964 +++++++++++++++++++++++ users/stanrc85/rgb_backlight.h | 110 ++ users/stanrc85/rgb_backlight_api.h | 43 + users/stanrc85/rgb_backlight_keycodes.h | 34 + 4 files changed, 2151 insertions(+) create mode 100644 users/stanrc85/rgb_backlight.c create mode 100644 users/stanrc85/rgb_backlight.h create mode 100644 users/stanrc85/rgb_backlight_api.h create mode 100644 users/stanrc85/rgb_backlight_keycodes.h diff --git a/users/stanrc85/rgb_backlight.c b/users/stanrc85/rgb_backlight.c new file mode 100644 index 00000000000..dc5d7834b70 --- /dev/null +++ b/users/stanrc85/rgb_backlight.c @@ -0,0 +1,1964 @@ +/* Copyright 2017 Jason Williams (Wilba) + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ +#if RGB_BACKLIGHT_ENABLED + +#if defined (RGB_BACKLIGHT_ZEAL60) || defined (RGB_BACKLIGHT_ZEAL65) || defined (RGB_BACKLIGHT_M60_A) || defined(RGB_BACKLIGHT_M6_B) || defined(RGB_BACKLIGHT_KOYU) || defined(RGB_BACKLIGHT_HS60) +#else +#error None of the following was defined: RGB_BACKLIGHT_ZEAL60, RGB_BACKLIGHT_ZEAL65, RGB_BACKLIGHT_M60_A, RGB_BACKLIGHT_M6_B, RGB_BACKLIGHT_KOYU +#endif + +#ifndef MAX + #define MAX(X, Y) ((X) > (Y) ? (X) : (Y)) +#endif + +#ifndef MIN + #define MIN(a,b) ((a) < (b)? (a): (b)) +#endif + +#include "quantum.h" +#include "rgb_backlight.h" +#include "rgb_backlight_api.h" +#include "rgb_backlight_keycodes.h" + +#if !defined(RGB_BACKLIGHT_HS60) +#include +#include +#include +#include "drivers/avr/i2c_master.h" +#else +#include "ch.h" +#include "hal.h" +#include "drivers/arm/i2c_master.h" +#include "tmk_core/common/eeprom.h" +#endif +#include "progmem.h" +#include "quantum/color.h" + +#if defined (RGB_BACKLIGHT_M6_B) +#include "drivers/issi/is31fl3218.h" +#define BACKLIGHT_LED_COUNT 6 +#elif defined (RGB_BACKLIGHT_HS60) +#include "drivers/issi/is31fl3733.h" +#define BACKLIGHT_LED_COUNT 64 +#else +#include "drivers/issi/is31fl3731.h" +#define BACKLIGHT_LED_COUNT 72 +#endif + +#define BACKLIGHT_EFFECT_MAX 10 + +backlight_config g_config = { + .use_split_backspace = RGB_BACKLIGHT_USE_SPLIT_BACKSPACE, + .use_split_left_shift = RGB_BACKLIGHT_USE_SPLIT_LEFT_SHIFT, + .use_split_right_shift = RGB_BACKLIGHT_USE_SPLIT_RIGHT_SHIFT, + .use_7u_spacebar = RGB_BACKLIGHT_USE_7U_SPACEBAR, + .use_iso_enter = RGB_BACKLIGHT_USE_ISO_ENTER, + .disable_hhkb_blocker_leds = RGB_BACKLIGHT_DISABLE_HHKB_BLOCKER_LEDS, + .disable_when_usb_suspended = RGB_BACKLIGHT_DISABLE_WHEN_USB_SUSPENDED, + .disable_after_timeout = RGB_BACKLIGHT_DISABLE_AFTER_TIMEOUT, + .brightness = 125, + .effect = RGB_BACKLIGHT_EFFECT, + .effect_speed = 0, + .color_1 = { .h = 0, .s = 255 }, + .color_2 = { .h = 150, .s = 255 }, + .caps_lock_indicator = { .color = { .h = 200, .s = 255 }, .index = 3-1 }, //purple + .layer_1_indicator = { .color = { .h = 100, .s = 255 }, .index = 60-1 }, //green + .layer_2_indicator = { .color = { .h = 150, .s = 255 }, .index = 60-1 }, //blue + .layer_3_indicator = { .color = { .h = 0, .s = 0 }, .index = 60-1 }, //white + .alphas_mods = { + RGB_BACKLIGHT_ALPHAS_MODS_ROW_0, + RGB_BACKLIGHT_ALPHAS_MODS_ROW_1, + RGB_BACKLIGHT_ALPHAS_MODS_ROW_2, + RGB_BACKLIGHT_ALPHAS_MODS_ROW_3, + RGB_BACKLIGHT_ALPHAS_MODS_ROW_4 }, +#if defined(RGB_BACKLIGHT_M6_B) + .custom_color = { { 0, 255 }, { 43, 255 }, { 85, 255 }, { 128, 255 }, { 171, 255 }, { 213, 255 } } +#endif +}; + +bool g_suspend_state = false; +uint8_t g_indicator_state = 0; + +// Global tick at 20 Hz +uint32_t g_tick = 0; + +// Ticks since this key was last hit. +uint8_t g_key_hit[BACKLIGHT_LED_COUNT]; + +// Ticks since any key was last hit. +uint32_t g_any_key_hit = 0; + +#if defined(RGB_BACKLIGHT_HS60) + +// This is a 7-bit address, that gets left-shifted and bit 0 +// set to 0 for write, 1 for read (as per I2C protocol) +// ADDR_2 is not needed. it is here as a dummy +#define ISSI_ADDR_1 0x50 +#define ISSI_ADDR_2 0x50 + +const is31_led g_is31_leds[DRIVER_LED_TOTAL] = { +/* Refer to IS31 manual for these locations + * driver + * | R location + * | | G location + * | | | B location + * | | | | */ + {0, B_1, A_1, C_1}, //LA1 + {0, E_1, D_1, F_1}, //LA2 + {0, H_1, G_1, I_1}, //LA3 + {0, K_1, J_1, L_1}, //LA4 + {0, B_2, A_2, C_2}, //LA5 + {0, E_2, D_2, F_2}, //LA6 + {0, H_2, G_2, I_2}, //LA7 + {0, K_2, J_2, L_2}, //LA8 + {0, B_3, A_3, C_3}, //LA9 + {0, E_3, D_3, F_3}, //LA10 + {0, H_3, G_3, I_3}, //LA11 + {0, K_3, J_3, L_3}, //LA12 + {0, B_4, A_4, C_4}, //LA13 + {0, E_4, D_4, F_4}, //LA14 + {0, H_4, G_4, I_4}, //LA15 + {0, K_4, J_4, L_4}, //LA16 + {0, B_5, A_5, C_5}, //LA17 + {0, E_5, D_5, F_5}, //LA18 + {0, H_5, G_5, I_5}, //LA19 + {0, K_5, J_5, L_5}, //LA20 + {0, B_6, A_6, C_6}, //LA21 + {0, E_6, D_6, F_6}, //LA22 + {0, H_6, G_6, I_6}, //LA23 + {0, K_6, J_6, L_6}, //LA24 + {0, B_7, A_7, C_7}, //LA25 + {0, E_7, D_7, F_7}, //LA26 + {0, H_7, G_7, I_7}, //LA27 + {0, K_7, J_7, L_7}, //LA28 + {0, B_8, A_8, C_8}, //LA29 + {0, E_8, D_8, F_8}, //LA30 + {0, H_8, G_8, I_8}, //LA31 + {0, K_8, J_8, L_8}, //LA32 + {0, B_9, A_9, C_9}, //LA33 + {0, E_9, D_9, F_9}, //LA34 + {0, H_9, G_9, I_9}, //LA35 + {0, K_9, J_9, L_9}, //LA36 + {0, B_10, A_10, C_10}, //LA37 + {0, E_10, D_10, F_10}, //LA38 + {0, H_10, G_10, I_10}, //LA39 + {0, K_10, J_10, L_10}, //LA40 + {0, B_11, A_11, C_11}, //LA41 + {0, E_11, D_11, F_11}, //LA42 + {0, H_11, G_11, I_11}, //LA43 + {0, K_11, J_11, L_11}, //LA44 + {0, B_12, A_12, C_12}, //LA45 + {0, E_12, D_12, F_12}, //LA46 + {0, H_12, G_12, I_12}, //LA47 + {0, K_12, J_12, L_12}, //LA48 + {0, B_13, A_13, C_13}, //LA49 + {0, E_13, D_13, F_13}, //LA50 + {0, H_13, G_13, I_13}, //LA51 + {0, K_13, J_13, L_13}, //LA52 + {0, B_14, A_14, C_14}, //LA53 + {0, E_14, D_14, F_14}, //LA54 + {0, H_14, G_14, I_14}, //LA55 + {0, K_14, J_14, L_14}, //LA56 + {0, B_15, A_15, C_15}, //LA57 + {0, E_15, D_15, F_15}, //LA58 + {0, H_15, G_15, I_15}, //LA59 + {0, K_15, J_15, L_15}, //LA60 + {0, B_16, A_16, C_16}, //LA61 + {0, E_16, D_16, F_16}, //LA62 + {0, H_16, G_16, I_16}, //LA63 + {0, K_16, J_16, L_16}, //LA64 +}; + +#elif !defined(RGB_BACKLIGHT_M6_B) +// This is a 7-bit address, that gets left-shifted and bit 0 +// set to 0 for write, 1 for read (as per I2C protocol) +#define ISSI_ADDR_1 0x74 +#define ISSI_ADDR_2 0x76 + +const is31_led g_is31_leds[DRIVER_LED_TOTAL] = { +/* Refer to IS31 manual for these locations + * driver + * | R location + * | | G location + * | | | B location + * | | | | */ + {0, C2_1, C3_1, C4_1}, // LA0 + {0, C1_1, C3_2, C4_2}, // LA1 + {0, C1_2, C2_2, C4_3}, // LA2 + {0, C1_3, C2_3, C3_3}, // LA3 + {0, C1_4, C2_4, C3_4}, // LA4 + {0, C1_5, C2_5, C3_5}, // LA5 + {0, C1_6, C2_6, C3_6}, // LA6 + {0, C1_7, C2_7, C3_7}, // LA7 + {0, C1_8, C2_8, C3_8}, // LA8 + {0, C9_1, C8_1, C7_1}, // LA9 + {0, C9_2, C8_2, C7_2}, // LA10 + {0, C9_3, C8_3, C7_3}, // LA11 + {0, C9_4, C8_4, C7_4}, // LA12 + {0, C9_5, C8_5, C7_5}, // LA13 + {0, C9_6, C8_6, C7_6}, // LA14 + {0, C9_7, C8_7, C6_6}, // LA15 + {0, C9_8, C7_7, C6_7}, // LA16 + {0, C8_8, C7_8, C6_8}, // LA17 + + {0, C2_9, C3_9, C4_9}, // LB0 + {0, C1_9, C3_10, C4_10}, // LB1 + {0, C1_10, C2_10, C4_11}, // LB2 + {0, C1_11, C2_11, C3_11}, // LB3 + {0, C1_12, C2_12, C3_12}, // LB4 + {0, C1_13, C2_13, C3_13}, // LB5 + {0, C1_14, C2_14, C3_14}, // LB6 + {0, C1_15, C2_15, C3_15}, // LB7 + {0, C1_16, C2_16, C3_16}, // LB8 + {0, C9_9, C8_9, C7_9}, // LB9 + {0, C9_10, C8_10, C7_10}, // LB10 + {0, C9_11, C8_11, C7_11}, // LB11 + {0, C9_12, C8_12, C7_12}, // LB12 + {0, C9_13, C8_13, C7_13}, // LB13 + {0, C9_14, C8_14, C7_14}, // LB14 + {0, C9_15, C8_15, C6_14}, // LB15 + {0, C9_16, C7_15, C6_15}, // LB16 + {0, C8_16, C7_16, C6_16}, // LB17 + + {1, C2_1, C3_1, C4_1}, // LC0 + {1, C1_1, C3_2, C4_2}, // LC1 + {1, C1_2, C2_2, C4_3}, // LC2 + {1, C1_3, C2_3, C3_3}, // LC3 + {1, C1_4, C2_4, C3_4}, // LC4 + {1, C1_5, C2_5, C3_5}, // LC5 + {1, C1_6, C2_6, C3_6}, // LC6 + {1, C1_7, C2_7, C3_7}, // LC7 + {1, C1_8, C2_8, C3_8}, // LC8 + {1, C9_1, C8_1, C7_1}, // LC9 + {1, C9_2, C8_2, C7_2}, // LC10 + {1, C9_3, C8_3, C7_3}, // LC11 + {1, C9_4, C8_4, C7_4}, // LC12 + {1, C9_5, C8_5, C7_5}, // LC13 + {1, C9_6, C8_6, C7_6}, // LC14 + {1, C9_7, C8_7, C6_6}, // LC15 + {1, C9_8, C7_7, C6_7}, // LC16 + {1, C8_8, C7_8, C6_8}, // LC17 + + {1, C2_9, C3_9, C4_9}, // LD0 + {1, C1_9, C3_10, C4_10}, // LD1 + {1, C1_10, C2_10, C4_11}, // LD2 + {1, C1_11, C2_11, C3_11}, // LD3 + {1, C1_12, C2_12, C3_12}, // LD4 + {1, C1_13, C2_13, C3_13}, // LD5 + {1, C1_14, C2_14, C3_14}, // LD6 + {1, C1_15, C2_15, C3_15}, // LD7 + {1, C1_16, C2_16, C3_16}, // LD8 + {1, C9_9, C8_9, C7_9}, // LD9 + {1, C9_10, C8_10, C7_10}, // LD10 + {1, C9_11, C8_11, C7_11}, // LD11 + {1, C9_12, C8_12, C7_12}, // LD12 + {1, C9_13, C8_13, C7_13}, // LD13 + {1, C9_14, C8_14, C7_14}, // LD14 + {1, C9_15, C8_15, C6_14}, // LD15 + {1, C9_16, C7_15, C6_15}, // LD16 + {1, C8_16, C7_16, C6_16}, // LD17 +}; +#endif // !defined(RGB_BACKLIGHT_M6_B) + + +typedef struct Point { + uint8_t x; + uint8_t y; +} Point; + + +// index in range 0..71 (LA0..LA17, LB0..LB17, LC0..LC17, LD0..LD17) +// point values in range x=0..224 y=0..64 +// origin is center of top-left key (i.e Esc) +#if defined (RGB_BACKLIGHT_ZEAL65) +const Point g_map_led_to_point[BACKLIGHT_LED_COUNT] PROGMEM = { + // LA0..LA17 + {120,16}, {104,16}, {88,16}, {72,16}, {56,16}, {40,16}, {24,16}, {4,16}, {4,32}, + {128,0}, {112,0}, {96,0}, {80,0}, {64,0}, {48,0}, {32,0}, {16,0}, {0,0}, + // LB0..LB17 + {144,0}, {160,0}, {176,0}, {192,0}, {216,0}, {224,0}, {240,0}, {240,16}, {240,32}, + {136,16}, {152,16}, {168,16}, {184,16}, {200,16}, {220,16}, {240,48}, {240,64}, {224,64}, + // LC0..LC17 + {96,64}, {100,48}, {84,48}, {68,48}, {52,48}, {36,48}, {255,255}, {48,60}, {28,64}, + {108,32}, {92,32}, {76,32}, {60,32}, {44,32}, {28,32}, {20,44}, {10,48}, {4,64}, + // LD0..LD17 + {124,32}, {140,32}, {156,32}, {172,32}, {188,32}, {214,32}, {180,48}, {202,48}, {224,48}, + {116,48}, {132,48}, {148,48}, {164,48}, {255,255}, {144,60}, {164,64}, {188,64}, {208,64} +}; +const Point g_map_led_to_point_polar[BACKLIGHT_LED_COUNT] PROGMEM = { + // LA0..LA17 + {64,128}, {75,132}, {84,145}, {91,164}, {97,187}, {102,213}, {105,242}, {109,255}, {128,243}, + {61,255}, {67,255}, {72,255}, {77,255}, {82,255}, {86,255}, {90,255}, {93,255}, {96,255}, + // LB0..LB17 + {56,255}, {51,255}, {46,255}, {42,255}, {37,255}, {35,255}, {32,255}, {19,255}, {0,255}, + {53,132}, {44,145}, {37,164}, {31,187}, {26,213}, {22,249}, {237,255}, {224,255}, {221,255}, + // LC0..LC17 + {184,255}, {179,135}, {170,149}, {163,169}, {157,193}, {153,220}, {255,255}, {167,255}, {165,255}, + {128,26}, {128,60}, {128,94}, {128,128}, {128,162}, {128,196}, {145,233}, {148,255}, {161,255}, + // LD0..LD17 + {0,9}, {0,43}, {0,77}, {0,111}, {0,145}, {0,201}, {224,181}, {230,217}, {235,255}, + {189,128}, {200,131}, {210,141}, {218,159}, {255,255}, {201,228}, {206,255}, {213,255}, {218,255} +}; +#elif defined (RGB_BACKLIGHT_KOYU) +const Point g_map_led_to_point[BACKLIGHT_LED_COUNT] PROGMEM = { + // LA0..LA17 + {120,16}, {104,16}, {88,16}, {72,16}, {56,16}, {40,16}, {24,16}, {4,16}, {4,32}, + {128,0}, {112,0}, {96,0}, {80,0}, {64,0}, {48,0}, {32,0}, {16,0}, {0,0}, + // LB0..LB17 + {144,0}, {160,0}, {176,0}, {192,0}, {208,0}, {224,0}, {240,0}, {240,16}, {240,32}, + {136,16}, {152,16}, {168,16}, {184,16}, {200,16}, {220,16}, {240,48}, {240,64}, {224,64}, + // LC0..LC17 + {112,64}, {100,48}, {84,48}, {68,48}, {52,48}, {36,48}, {64,60}, {44,60}, {24,64}, + {108,32}, {92,32}, {76,32}, {60,32}, {44,32}, {28,32}, {255,255}, {10,48}, {4,64}, + // LD0..LD17 + {124,32}, {140,32}, {156,32}, {172,32}, {188,32}, {214,32}, {180,48}, {202,48}, {224,48}, + {116,48}, {132,48}, {148,48}, {164,48}, {255,255}, {160,60}, {180,64}, {208,64}, {255,255} +}; +const Point g_map_led_to_point_polar[BACKLIGHT_LED_COUNT] PROGMEM = { + // LA0..LA17 + {64,128}, {75,132}, {84,145}, {91,164}, {97,187}, {102,213}, {105,242}, {109,255}, {128,243}, + {61,255}, {67,255}, {72,255}, {77,255}, {82,255}, {86,255}, {90,255}, {93,255}, {96,255}, + // LB0..LB17 + {56,255}, {51,255}, {46,255}, {42,255}, {38,255}, {35,255}, {32,255}, {19,255}, {0,255}, + {53,132}, {44,145}, {37,164}, {31,187}, {26,213}, {22,249}, {237,255}, {224,255}, {221,255}, + // LC0..LC17 + {189,255}, {179,135}, {170,149}, {163,169}, {157,193}, {153,220}, {172,252}, {169,255}, {165,255}, + {128,26}, {128,60}, {128,94}, {128,128}, {128,162}, {128,196}, {255,255}, {148,255}, {161,255}, + // LD0..LD17 + {0,9}, {0,43}, {0,77}, {0,111}, {0,145}, {0,201}, {224,181}, {230,217}, {235,255}, + {189,128}, {200,131}, {210,141}, {218,159}, {255,255}, {207,238}, {211,255}, {218,255}, {255,255} +}; +#elif defined (RGB_BACKLIGHT_ZEAL60) || defined (RGB_BACKLIGHT_M60_A) +const Point g_map_led_to_point[BACKLIGHT_LED_COUNT] PROGMEM = { + // LA0..LA17 + {120,16}, {104,16}, {88,16}, {72,16}, {56,16}, {40,16}, {24,16}, {4,16}, {4,32}, + {128,0}, {112,0}, {96,0}, {80,0}, {64,0}, {48,0}, {32,0}, {16,0}, {0,0}, + // LB0..LB17 + {144,0}, {160,0}, {176,0}, {192,0}, {216,0}, {224,0}, {255,255}, {255,255}, {255,255}, + {136,16}, {152,16}, {168,16}, {184,16}, {200,16}, {220,16}, {255,255}, {255,255}, {255,255}, + // LC0..LC17 + {102,64}, {100,48}, {84,48}, {68,48}, {52,48}, {36,48}, {60,64}, {43,64}, {23,64}, + {108,32}, {92,32}, {76,32}, {60,32}, {44,32}, {28,32}, {20,48}, {2,48}, {3,64}, + // LD0..LD17 + {124,32}, {140,32}, {156,32}, {172,32}, {188,32}, {214,32}, {180,48}, {210,48}, {224,48}, + {116,48}, {132,48}, {148,48}, {164,48}, {144,64}, {161,64}, {181,64}, {201,64}, {221,64} +}; +const Point g_map_led_to_point_polar[BACKLIGHT_LED_COUNT] PROGMEM = { + // LA0..LA17 + {58,129}, {70,129}, {80,139}, {89,157}, {96,181}, {101,208}, {105,238}, {109,255}, {128,247}, {58,255}, + {64,255}, {70,255}, {75,255}, {80,255}, {85,255}, {89,255}, {93,255}, {96,255}, + // LB0..LB17 + {53,255}, {48,255}, {43,255}, {39,255}, {34,255}, {32,255}, {255,255}, {255,255}, {255,255}, + {48,139}, {39,157}, {32,181}, {27,208}, {23,238}, {19,255}, {255,255}, {255,255}, {255,255}, + // LC0..LC17 + {188,255}, {183,131}, {173,143}, {165,163}, {159,188}, {154,216}, {172,252}, {170,255}, {165,255}, + {128,9}, {128,46}, {128,82}, {128,119}, {128,155}, {128,192}, {150,244}, {147,255}, {161,255}, + // LD0..LD17 + {0,27}, {0,64}, {0,101}, {0,137}, {0,174}, {255,233}, {228,201}, {235,255}, {237,255}, + {195,128}, {206,136}, {215,152}, {222,175}, {205,234}, {209,255}, {214,255}, {219,255}, {223,255} +}; +#elif defined (RGB_BACKLIGHT_HS60) && defined (HS60_ANSI) +const Point g_map_led_to_point[BACKLIGHT_LED_COUNT] PROGMEM = { + // LA1..LA47 + {0,0}, {4,16}, {6,32}, {10,48}, {16,0}, {24,16}, {28,32}, {36,48}, {32,0}, {40,16}, {44,32}, {52,48}, + {48,0}, {56,16}, {60,32}, {68,48}, {64,0}, {72,16}, {76,32}, {84,48}, {80,0}, {88,16}, {92,32}, {100,48}, + {96,0}, {104,16}, {108,32}, {116,48}, {112,0}, {120,16}, {124,32}, {132,48}, {128,0}, {136,16}, {140,32}, + {148,48}, {144,0}, {152,16}, {156,32}, {164,48}, {160,0}, {168,16}, {172,32}, {180,48}, {176,0}, {184, 16}, {188,32}, + {255,255},// LA48 does not exist, dummy + // LA49..LA50 + {192,0}, {200,16}, + {255,255},// LA51 does not exit, dummy + // LA52..LA60 + {210,48}, {216,0}, {220,16}, {214,32}, {222,64}, {2,64}, {22,64}, {42,64}, {102,64}, + {255,255},// LA61 does not exit, dummy + {162,64}, {182,64}, {202,64} +}; +const Point g_map_led_to_point_polar[BACKLIGHT_LED_COUNT] PROGMEM = { + // LA1..LA47 + {96,255}, {109,255}, {128,242}, {148,255}, {93,255}, {105,238}, {128,192}, {154,216}, {89,255}, {101,208}, {128,155}, {159,188}, + {85,255}, {96,181}, {128,119}, {165,163}, {81,255}, {89,157}, {128,82}, {173,143}, {75,255}, {81,139}, {128,46}, {183,131}, + {70,255}, {70,129}, {129,9}, {195,128}, {64,255}, {58,129}, {255,27}, {206,136}, {58,255}, {47,139}, {255,64}, {215,152}, + {53,255}, {39,157}, {255,101}, {222,175}, {47,255}, {32,181}, {255,137}, {228,201}, {43,255}, {27,208}, {255, 174}, + {255,255},// LA48 does not exist, dummy + // LA49..LA50 + {39,255}, {23,238}, + {255,255},// LA51 does not exit, dummy + // LA52..LA60 + {235,255}, {33,255}, {19,255}, {255,233}, {224,255}, {160,255}, {164,255}, {169,255}, {188,255}, + {255,255},// LA61 does not exit, dummy + {209,255}, {215,255}, {220,255} +}; +#elif defined (RGB_BACKLIGHT_HS60) && defined (HS60_HHKB) +const Point g_map_led_to_point[BACKLIGHT_LED_COUNT] PROGMEM = { + // LA1..LA60 + {0,0}, {4,16}, {6,32}, {10,48}, {16,0}, {24,16}, {28,32}, {36,48}, {32,0}, {40,16}, {44,32}, {52,48}, + {48,0}, {56,16}, {60,32}, {68,48}, {64,0}, {72,16}, {76,32}, {84,48}, {80,0}, {88,16}, {92,32}, {100,48}, + {96,0}, {104,16}, {108,32}, {116,48}, {112,0}, {120,16}, {124,32}, {132,48}, {128,0}, {136,16}, {140,32}, + {148,48}, {144,0}, {152,16}, {156,32}, {164,48}, {160,0}, {168,16}, {172,32}, {180,48}, {176,0}, {184, 16}, {188,32}, + {224,0}, {192,0}, {200,16}, {202,48}, {224,48}, {208,0}, {220,16}, {214,32}, {220,64}, {4,64}, {24,64}, {44,64}, {112,64}, + {255,255}, {255,255}, // LA61..LA62 does not exit, dummy + // LA63..LA64 + {180,64}, {200,64} +}; +const Point g_map_led_to_point_polar[BACKLIGHT_LED_COUNT] PROGMEM = { + // LA1..LA60 + {96,255}, {109,255}, {128,242}, {148,255}, {93,255}, {105,238}, {128,192}, {154,216}, {89,255}, {101,208}, {128,155}, {159,188}, + {85,255}, {96,181}, {128,119}, {165,163}, {81,255}, {89,157}, {128,82}, {173,143}, {75,255}, {81,139}, {128,46}, {183,131}, + {70,255}, {70,129}, {129,9}, {195,128}, {64,255}, {58,129}, {255,27}, {206,136}, {58,255}, {47,139}, {255,64}, {215,152}, + {53,255}, {39,157}, {255,101}, {222,175}, {47,255}, {32,181}, {255,137}, {228,201}, {43,255}, {27,208}, {255, 174}, {32,255}, + {39,255}, {23,238}, {233,242}, {237,255}, {35,255}, {19,255}, {255,233}, {223,255}, {161,255}, {165,255}, {170,255}, {192,255}, + {255,255}, {255,255}, // LA61..LA62 does not exit, dummy + // LA63..LA64 + {214,255}, {219,255} +}; +#elif defined (RGB_BACKLIGHT_HS60) //HS60_ISO +const Point g_map_led_to_point[BACKLIGHT_LED_COUNT] PROGMEM = { + // LA1..LA50 + {0,0}, {4,16}, {6,32}, {2,48}, {16,0}, {24,16}, {28,32}, {36,48}, {32,0}, {40,16}, {44,32}, {52,48}, {48,0}, + {56,16}, {60,32}, {68,48}, {64,0}, {72,16}, {76,32}, {84,48}, {80,0}, {88,16}, {92,32}, {100,48}, {96,0}, {104,16}, + {108,32}, {116,48}, {112,0}, {120,16}, {124,32}, {132,48}, {128,0}, {136,16}, {140,32}, {148,48}, {144,0}, {152,16}, + {156,32}, {164,48}, {160,0}, {168,16}, {172,32}, {180,48}, {176,0}, {184, 16}, {188,32}, {20,48}, {192,0}, {200,16}, + {255,255},// LA51 does not exit, dummy + // LA52..LA60 + {210,48}, {216,0}, {220,16}, {222,24}, {222,64}, {2,64}, {22,64}, {42,64}, {102,64}, + {255,255},// LA61 does not exit, dummy + {162,64}, {182,64}, {202,64} +}; +const Point g_map_led_to_point_polar[BACKLIGHT_LED_COUNT] PROGMEM = { + // LA1..LA50 + {96,255}, {109,255}, {128,242}, {147,255}, {93,255}, {105,238}, {128,192}, {154,216}, {89,255}, {101,208}, {128,155}, {159,188}, {85,255}, + {96,181}, {128,119}, {165,163}, {81,255}, {89,157}, {128,82}, {173,143}, {75,255}, {81,139}, {128,46}, {183,131}, {70,255}, {70,129}, + {129,9}, {195,128}, {64,255}, {58,129}, {255,27}, {206,136}, {58,255}, {47,139}, {255,64}, {215,152}, {53,255}, {39,157}, {255,101}, + {222,175}, {47,255}, {32,181}, {255,137}, {228,201}, {43,255}, {27,208}, {255, 174}, {150,246}, {39,255}, {23,238}, + {255,255},// LA51 does not exit, dummy + // LA52..LA60 + {235,255}, {33,255}, {19,255}, {10,255}, {224,255}, {160,255}, {164,255}, {169,255}, {188,255}, + {255,255},// LA61 does not exit, dummy + {209,255}, {215,255}, {220,255} +}; +#elif defined (RGB_BACKLIGHT_M6_B) +// M6-B is really simple: +// 0 3 5 +// 1 2 4 +const Point g_map_led_to_point[BACKLIGHT_LED_COUNT] PROGMEM = { + {0,0}, {0,16}, {16,16}, {16,0}, {32,16}, {32,0} +}; +const Point g_map_led_to_point_polar[BACKLIGHT_LED_COUNT] PROGMEM = { + {160,255}, {96,255}, {77,255}, {179,255}, {51,255}, {205,255} +}; +#endif + +// This may seem counter-intuitive, but it's quite flexible. +// For each LED, get it's position to decide what color to make it. +// This solves the issue of LEDs (and switches) not aligning to a grid, +// or having a large "bitmap" and sampling them. +void map_led_to_point( uint8_t index, Point *point ) +{ + // Slightly messy way to get Point structs out of progmem. + uint8_t *addr = (uint8_t*)&g_map_led_to_point[index]; + point->x = pgm_read_byte(addr); + point->y = pgm_read_byte(addr+1); + +#if defined (RGB_BACKLIGHT_M6_B) + return; +#endif + + switch (index) + { + case 18+4: // LB4A + if ( g_config.use_split_backspace ) + point->x -= 8; + break; +#if defined (RGB_BACKLIGHT_ZEAL60) + case 18+14: // LB14A + if ( g_config.use_iso_enter ) + point->y += 8; // extremely pedantic + break; + case 54+5: // LD5A + if ( !g_config.use_iso_enter ) + point->x -= 10; + break; + case 36+16: // LC16A + if ( !g_config.use_split_left_shift ) + point->x += 8; + break; +#endif +#if defined (RGB_BACKLIGHT_ZEAL60) || defined (RGB_BACKLIGHT_M60_A) + case 36+0: // LC0A + if ( g_config.use_7u_spacebar ) + point->x += 10; + break; + case 36+6: // LC6A + if ( g_config.use_7u_spacebar ) + point->x += 4; + break; + case 54+7: // LD7A + if ( !g_config.use_split_right_shift ) + point->x -= 8; + break; +#endif + } +} + +void map_led_to_point_polar( uint8_t index, Point *point ) +{ + // Slightly messy way to get Point structs out of progmem. + uint8_t *addr = (uint8_t*)&g_map_led_to_point_polar[index]; + point->x = pgm_read_byte(addr); + point->y = pgm_read_byte(addr+1); +} + +// +// Maps switch matrix coordinate (row,col) to LED index +// + + +#if defined (RGB_BACKLIGHT_ZEAL65) +// Note: Left spacebar stab is at 4,2 (LC7) +// Right spacebar stab is at 4,9 (D14) +// +// A17, A16, A15, A14, A13, A12, A11, A10, A9, B0, B1, B2, B3, B4, B6 +// A7, A6, A5, A4, A3, A2, A1, A0, B9, B10, B11, B12, B13, B14, B7 +// A8, C14, C13, C12, C11, C10, C9, D0, D1, D2, D3, D4, D5, B5, B8 +// C16, C15, C5, C4, C3, C2, C1, D9, D10, D11, D12, D6, D7, D8, B15 +// C17, C8, C7, ---, ---, ---, ---, C0, ---, D14, D15, D16, D17, B17, B16 +const uint8_t g_map_row_column_to_led[MATRIX_ROWS][MATRIX_COLS] PROGMEM = { + { 0+17, 0+16, 0+15, 0+14, 0+13, 0+12, 0+11, 0+10, 0+9, 18+0, 18+1, 18+2, 18+3, 18+4, 18+6 }, + { 0+7, 0+6, 0+5, 0+4, 0+3, 0+2, 0+1, 0+0, 18+9, 18+10, 18+11, 18+12, 18+13, 18+14, 18+7 }, + { 0+8, 36+14, 36+13, 36+12, 36+11, 36+10, 36+9, 54+0, 54+1, 54+2, 54+3, 54+4, 54+5, 18+5, 18+8 }, + { 36+16, 36+15, 36+5, 36+4, 36+3, 36+2, 36+1, 54+9, 54+10, 54+11, 54+12, 54+6, 54+7, 54+8, 18+15 }, + { 36+17, 36+8, 36+7, 255, 255, 255, 255, 36+0, 255, 54+14, 54+15, 54+16, 54+17, 18+17, 18+16 } +}; +#elif defined(RGB_BACKLIGHT_KOYU) +// Note: Left spacebar stab is at 4,4 (LC6) +// Right spacebar stab is at 4,10 (D14) +// +// A17, A16, A15, A14, A13, A12, A11, A10, A9, B0, B1, B2, B3, B4, B6 +// A7, A6, A5, A4, A3, A2, A1, A0, B9, B10, B11, B12, B13, B14, B7 +// A8, C14, C13, C12, C11, C10, C9, D0, D1, D2, D3, D4, D5, B5, B8 +// C16, C15, C5, C4, C3, C2, C1, D9, D10, D11, D12, D6, D7, D8, B15 +// C17, C8, C7, C6, ---, ---, ---, C0, ---, ---, D14, D15, D16, B17, B16 +const uint8_t g_map_row_column_to_led[MATRIX_ROWS][MATRIX_COLS] PROGMEM = { + { 0+17, 0+16, 0+15, 0+14, 0+13, 0+12, 0+11, 0+10, 0+9, 18+0, 18+1, 18+2, 18+3, 18+4, 18+6 }, + { 0+7, 0+6, 0+5, 0+4, 0+3, 0+2, 0+1, 0+0, 18+9, 18+10, 18+11, 18+12, 18+13, 18+14, 18+7 }, + { 0+8, 36+14, 36+13, 36+12, 36+11, 36+10, 36+9, 54+0, 54+1, 54+2, 54+3, 54+4, 54+5, 18+5, 18+8 }, + { 36+16, 36+15, 36+5, 36+4, 36+3, 36+2, 36+1, 54+9, 54+10, 54+11, 54+12, 54+6, 54+7, 54+8, 18+15 }, + { 36+17, 36+8, 36+7, 36+6, 255, 255, 255, 36+0, 255, 255, 54+14, 54+15, 54+16, 18+17, 18+16 } +}; +#elif defined (RGB_BACKLIGHT_ZEAL60) || defined (RGB_BACKLIGHT_M60_A) +// Note: Left spacebar stab is at 4,3 (LC6) +// Right spacebar stab is at 4,9 (LD13) or 4,10 (LD14) +// +// A17, A16, A15, A14, A13, A12, A11, A10, A9, B0, B1, B2, B3, B4, +// A7, A6, A5, A4, A3, A2, A1, A0, B9, B10, B11, B12, B13, B14, +// A8, C14, C13, C12, C11, C10, C9, D0, D1, D2, D3, D4, D5, B5, +// C16, C15, C5, C4, C3, C2, C1, D9, D10, D11, D12, D6, D7, D8, +// C17, C8, C7, C6, ---, ---, ---, C0, ---, D13, D14, D15, D16, D17, +const uint8_t g_map_row_column_to_led[MATRIX_ROWS][MATRIX_COLS] PROGMEM = { + { 0+17, 0+16, 0+15, 0+14, 0+13, 0+12, 0+11, 0+10, 0+9, 18+0, 18+1, 18+2, 18+3, 18+4 }, + { 0+7, 0+6, 0+5, 0+4, 0+3, 0+2, 0+1, 0+0, 18+9, 18+10, 18+11, 18+12, 18+13, 18+14 }, + { 0+8, 36+14, 36+13, 36+12, 36+11, 36+10, 36+9, 54+0, 54+1, 54+2, 54+3, 54+4, 54+5, 18+5 }, + { 36+16, 36+15, 36+5, 36+4, 36+3, 36+2, 36+1, 54+9, 54+10, 54+11, 54+12, 54+6, 54+7, 54+8 }, + { 36+17, 36+8, 36+7, 36+6, 255, 255, 255, 36+0, 255, 54+13, 54+14, 54+15, 54+16, 54+17 } +}; +#elif defined (RGB_BACKLIGHT_HS60) && defined (HS60_ANSI) +// +// LA1, LA5, LA9, LA13, LA17, LA21, LA25, LA29, LA33, LA37, LA41, LA45, LA49, LA53, +// LA2, LA6, LA10, LA14, LA18, LA22, LA26, LA30, LA34, LA38, LA42, LA46, LA50, ---, +// LA3, LA7, LA11, LA15, LA19, LA23, LA27, LA31, LA35, LA39, LA43, LA47, LA54, LA55, +// LA4, ---, LA8, LA12, LA16, LA20, LA24, LA28, LA32, LA36, LA40, LA44, ---, LA52, +// LA57, LA58, LA59, ---, ---, ---, LA60, ---, ---, ---, LA62, LA63, LA64, LA56 +const uint8_t g_map_row_column_to_led[MATRIX_ROWS][MATRIX_COLS] PROGMEM = { + { 1-1, 5-1, 9-1, 13-1, 17-1, 21-1, 25-1, 29-1, 33-1, 37-1, 41-1, 45-1, 49-1, 53-1 }, + { 2-1, 6-1, 10-1, 14-1, 18-1, 22-1, 26-1, 30-1, 34-1, 38-1, 42-1, 46-1, 50-1, 255 }, + { 3-1, 7-1, 11-1, 15-1, 19-1, 23-1, 27-1, 31-1, 35-1, 39-1, 43-1, 47-1, 54-1, 55-1 }, + { 4-1, 255, 8-1, 12-1, 16-1, 20-1, 24-1, 28-1, 32-1, 36-1, 40-1, 44-1, 255, 52-1 }, + { 57-1, 58-1, 59-1, 255, 255, 255, 60-1, 255, 255, 255, 62-1, 63-1, 64-1, 56-1 } +}; +#elif defined (RGB_BACKLIGHT_HS60) && defined (HS60_HHKB) +// +// LA1, LA5, LA9, LA13, LA17, LA21, LA25, LA29, LA33, LA37, LA41, LA45, LA49, LA53, +// LA2, LA6, LA10, LA14, LA18, LA22, LA26, LA30, LA34, LA38, LA42, LA46, LA50, LA48, +// LA3, LA7, LA11, LA15, LA19, LA23, LA27, LA31, LA35, LA39, LA43, LA47, LA54, LA55, +// LA4, ---, LA8, LA12, LA16, LA20, LA24, LA28, LA32, LA36, LA40, LA44, LA51, LA52, +// LA57, LA58, LA59, ---, ---, ---, LA60, ---, ---, ---, ---, LA63, LA64, LA56 +const uint8_t g_map_row_column_to_led[MATRIX_ROWS][MATRIX_COLS] PROGMEM = { + { 1-1, 5-1, 9-1, 13-1, 17-1, 21-1, 25-1, 29-1, 33-1, 37-1, 41-1, 45-1, 49-1, 53-1 }, + { 2-1, 6-1, 10-1, 14-1, 18-1, 22-1, 26-1, 30-1, 34-1, 38-1, 42-1, 46-1, 50-1, 48-1 }, + { 3-1, 7-1, 11-1, 15-1, 19-1, 23-1, 27-1, 31-1, 35-1, 39-1, 43-1, 47-1, 54-1, 55-1 }, + { 4-1, 255, 8-1, 12-1, 16-1, 20-1, 24-1, 28-1, 32-1, 36-1, 40-1, 44-1, 51-1, 52-1 }, + { 57-1, 58-1, 59-1, 255, 255, 255, 60-1, 255, 255, 255, 255, 63-1, 64-1, 56-1 } +}; +#elif defined (RGB_BACKLIGHT_HS60) //HS60_ISO +// +// LA1, LA5, LA9, LA13, LA17, LA21, LA25, LA29, LA33, LA37, LA41, LA45, LA49, LA53, +// LA2, LA6, LA10, LA14, LA18, LA22, LA26, LA30, LA34, LA38, LA42, LA46, LA50, ---, +// LA3, LA7, LA11, LA15, LA19, LA23, LA27, LA31, LA35, LA39, LA43, LA47, LA54, LA55, +// LA4, LA48, LA8, LA12, LA16, LA20, LA24, LA28, LA32, LA36, LA40, LA44, ---, LA52, +// LA57, LA58, LA59, ---, ---, ---, LA60, ---, ---, ---, LA62, LA63, LA64, LA56 +const uint8_t g_map_row_column_to_led[MATRIX_ROWS][MATRIX_COLS] PROGMEM = { + { 1-1, 5-1, 9-1, 13-1, 17-1, 21-1, 25-1, 29-1, 33-1, 37-1, 41-1, 45-1, 49-1, 53-1 }, + { 2-1, 6-1, 10-1, 14-1, 18-1, 22-1, 26-1, 30-1, 34-1, 38-1, 42-1, 46-1, 50-1, 255 }, + { 3-1, 7-1, 11-1, 15-1, 19-1, 23-1, 27-1, 31-1, 35-1, 39-1, 43-1, 47-1, 54-1, 55-1 }, + { 4-1, 48-1, 8-1, 12-1, 16-1, 20-1, 24-1, 28-1, 32-1, 36-1, 40-1, 44-1, 255, 52-1 }, + { 57-1, 58-1, 59-1, 255, 255, 255, 60-1, 255, 255, 255, 62-1, 63-1, 64-1, 56-1 } +}; +#elif defined (RGB_BACKLIGHT_M6_B) +// M6-B is really simple: +// 0 3 5 +// 1 2 4 +const uint8_t g_map_row_column_to_led[MATRIX_ROWS][MATRIX_COLS] PROGMEM = { + { 0, 3, 5, 1, 2, 4 } +}; +#endif + +void map_row_column_to_led( uint8_t row, uint8_t column, uint8_t *led ) +{ + *led = 255; + if ( row < MATRIX_ROWS && column < MATRIX_COLS ) + { + *led = pgm_read_byte(&g_map_row_column_to_led[row][column]); + } +} + +void backlight_update_pwm_buffers(void) +{ +#if defined (RGB_BACKLIGHT_M6_B) + IS31FL3218_update_pwm_buffers(); +#elif defined (RGB_BACKLIGHT_HS60) + IS31FL3733_update_pwm_buffers( ISSI_ADDR_1, ISSI_ADDR_2 ); + IS31FL3733_update_led_control_registers( ISSI_ADDR_1, ISSI_ADDR_2 ); +#else + IS31FL3731_update_pwm_buffers( ISSI_ADDR_1, ISSI_ADDR_2 ); + IS31FL3731_update_led_control_registers( ISSI_ADDR_1, ISSI_ADDR_2 ); +#endif +} + +void backlight_set_color( int index, uint8_t red, uint8_t green, uint8_t blue ) +{ +#if defined (RGB_BACKLIGHT_M6_B) + IS31FL3218_set_color( index, red, green, blue ); +#elif defined (RGB_BACKLIGHT_HS60) + IS31FL3733_set_color( index, red, green, blue ); +#else + IS31FL3731_set_color( index, red, green, blue ); +#endif +} + +void backlight_set_color_all( uint8_t red, uint8_t green, uint8_t blue ) +{ +#if defined (RGB_BACKLIGHT_M6_B) + IS31FL3218_set_color_all( red, green, blue ); +#elif defined (RGB_BACKLIGHT_HS60) + IS31FL3733_set_color_all( red, green, blue ); +#else + IS31FL3731_set_color_all( red, green, blue ); +#endif +} + +void backlight_set_key_hit(uint8_t row, uint8_t column) +{ + uint8_t led; + map_row_column_to_led(row,column,&led); + g_key_hit[led] = 0; + + g_any_key_hit = 0; +} + +#if !defined(RGB_BACKLIGHT_HS60) +// This is (F_CPU/1024) / 20 Hz +// = 15625 Hz / 20 Hz +// = 781 +#define TIMER3_TOP 781 + +void backlight_timer_init(void) +{ + static uint8_t backlight_timer_is_init = 0; + if ( backlight_timer_is_init ) + { + return; + } + backlight_timer_is_init = 1; + + // Timer 3 setup + TCCR3B = _BV(WGM32) | // CTC mode OCR3A as TOP + _BV(CS32) | _BV(CS30); // prescale by /1024 + // Set TOP value + uint8_t sreg = SREG; + cli(); + + OCR3AH = (TIMER3_TOP >> 8) & 0xff; + OCR3AL = TIMER3_TOP & 0xff; + SREG = sreg; +} + +void backlight_timer_enable(void) +{ + TIMSK3 |= _BV(OCIE3A); +} + +void backlight_timer_disable(void) +{ + TIMSK3 &= ~_BV(OCIE3A); +} +#else //STM32, use GPT with TIM4. Enable in halconf.h +static void gpt_backlight_timer_task(GPTDriver *gptp); +// Timer setup at 200Khz, callback at 10k ticks = 20Hz +static GPTConfig gpt4cfg1 = { + .frequency = 200000U, + .callback = gpt_backlight_timer_task +}; + +void backlight_timer_init(void) +{ + gptStart(&GPTD4, &gpt4cfg1); +} + +void backlight_timer_enable(void) +{ + gptStartContinuous(&GPTD4, 10000); +} + +void backlight_timer_disable(void) +{ + gptStopTimer(&GPTD4); +} +#endif //!defined(RGB_BACKLIGHT_HS60) + +void backlight_set_suspend_state(bool state) +{ + g_suspend_state = state; +} + +void backlight_set_indicator_state(uint8_t state) +{ + g_indicator_state = state; +} + +void backlight_effect_rgb_test(void) +{ + // Mask out bits 4 and 5 + // This 2-bit value will stay the same for 16 ticks. + switch ( (g_tick & 0x30) >> 4 ) + { + case 0: + { + backlight_set_color_all( 255, 0, 0 ); + break; + } + case 1: + { + backlight_set_color_all( 0, 255, 0 ); + break; + } + case 2: + { + backlight_set_color_all( 0, 0, 255 ); + break; + } + case 3: + { + backlight_set_color_all( 255, 255, 255 ); + break; + } + } +} + +#if defined(RGB_DEBUGGING_ONLY) +// This tests the LEDs +// Note that it will change the LED control registers +// in the LED drivers, and leave them in an invalid +// state for other backlight effects. +// ONLY USE THIS FOR TESTING LEDS! +void backlight_effect_single_LED_test(void) +{ + static uint8_t color = 0; // 0,1,2 for R,G,B + static uint8_t row = 0; + static uint8_t column = 0; + + static uint8_t tick = 0; + tick++; + + if ( tick > 2 ) + { + tick = 0; + column++; + } + if ( column > 14 ) + { + column = 0; + row++; + } + if ( row > 4 ) + { + row = 0; + color++; + } + if ( color > 2 ) + { + color = 0; + } + + uint8_t led; + map_row_column_to_led( row, column, &led ); + backlight_set_color_all( 255, 255, 255 ); + backlight_test_led( led, color==0, color==1, color==2 ); +} +#endif // defined(RGB_DEBUGGING_ONLY) + +// All LEDs off +void backlight_effect_all_off(void) +{ + backlight_set_color_all( 0, 0, 0 ); +} + +// Solid color +void backlight_effect_solid_color(void) +{ + HSV hsv = { .h = g_config.color_1.h, .s = g_config.color_1.s, .v = g_config.brightness }; + RGB rgb = hsv_to_rgb( hsv ); + backlight_set_color_all( rgb.r, rgb.g, rgb.b ); +} + +// alphas = color1, mods = color2 +void backlight_effect_alphas_mods(void) +{ + RGB rgb1 = hsv_to_rgb( (HSV){ .h = g_config.color_1.h, .s = g_config.color_1.s, .v = g_config.brightness } ); + RGB rgb2 = hsv_to_rgb( (HSV){ .h = g_config.color_2.h, .s = g_config.color_2.s, .v = g_config.brightness } ); + + for ( int row = 0; row < MATRIX_ROWS; row++ ) + { + for ( int column = 0; column < MATRIX_COLS; column++ ) + { + uint8_t index; + map_row_column_to_led( row, column, &index ); + if ( index < BACKLIGHT_LED_COUNT ) + { + if ( ( g_config.alphas_mods[row] & (1< 127 ) + { + deltaH -= 256; + } + else if ( deltaH < -127 ) + { + deltaH += 256; + } + // Divide delta by 4, this gives the delta per row + deltaH /= 4; + + int16_t s1 = g_config.color_1.s; + int16_t s2 = g_config.color_2.s; + int16_t deltaS = ( s2 - s1 ) / 4; + + HSV hsv = { .h = 0, .s = 255, .v = g_config.brightness }; + RGB rgb; + Point point; + for ( int i=0; i>4); + // Relies on hue being 8-bit and wrapping + hsv.h = g_config.color_1.h + ( deltaH * y ); + hsv.s = g_config.color_1.s + ( deltaS * y ); + rgb = hsv_to_rgb( hsv ); + backlight_set_color( i, rgb.r, rgb.g, rgb.b ); + } +} + +void backlight_effect_raindrops(bool initialize) +{ + int16_t h1 = g_config.color_1.h; + int16_t h2 = g_config.color_2.h; + int16_t deltaH = h2 - h1; + deltaH /= 4; + + // Take the shortest path between hues + if ( deltaH > 127 ) + { + deltaH -= 256; + } + else if ( deltaH < -127 ) + { + deltaH += 256; + } + + int16_t s1 = g_config.color_1.s; + int16_t s2 = g_config.color_2.s; + int16_t deltaS = ( s2 - s1 ) / 4; + + HSV hsv; + RGB rgb; + + // Change one LED every tick + uint8_t led_to_change = ( g_tick & 0x000 ) == 0 ? rand() % BACKLIGHT_LED_COUNT : 255; + + for ( int i=0; i> 2; + hsv.h = g_config.color_1.h + offset2; + hsv.s = 127 + ( point.y >> 1 ); + rgb = hsv_to_rgb( hsv ); + backlight_set_color( i, rgb.r, rgb.g, rgb.b ); + } +} + +#if defined(RGB_BACKLIGHT_M6_B) +void backlight_effect_custom_colors(void) +{ + RGB rgb; + for ( uint8_t i = 0; i < 6; i++ ) + { + HSV hsv = { .h = g_config.custom_color[i].h, .s = g_config.custom_color[i].s, .v = g_config.brightness }; + rgb = hsv_to_rgb( hsv ); + uint8_t led; + map_row_column_to_led( 0, i, &led ); + backlight_set_color( led, rgb.r, rgb.g, rgb.b ); + } +} +#endif + +void backlight_effect_indicators_set_colors( uint8_t index, HS color ) +{ + HSV hsv = { .h = color.h, .s = color.s, .v = g_config.brightness }; + RGB rgb = hsv_to_rgb( hsv ); + if ( index == 254 ) + { + backlight_set_color_all( rgb.r, rgb.g, rgb.b ); + } + else + { + backlight_set_color( index, rgb.r, rgb.g, rgb.b ); + + // If the spacebar LED is the indicator, + // do the same for the spacebar stabilizers + if ( index == 36+0 ) // LC0 + { +#if defined (RGB_BACKLIGHT_ZEAL65) + backlight_set_color( 36+7, rgb.r, rgb.g, rgb.b ); // LC7 + backlight_set_color( 54+14, rgb.r, rgb.g, rgb.b ); // LD14 +#elif defined (RGB_BACKLIGHT_KOYU) + backlight_set_color( 36+6, rgb.r, rgb.g, rgb.b ); // LC6 + backlight_set_color( 54+14, rgb.r, rgb.g, rgb.b ); // LD14 +#elif defined (RGB_BACKLIGHT_ZEAL60) || defined (RGB_BACKLIGHT_M60_A) + backlight_set_color( 36+6, rgb.r, rgb.g, rgb.b ); // LC6 + backlight_set_color( 54+13, rgb.r, rgb.g, rgb.b ); // LD13 + if ( g_config.use_7u_spacebar ) + { + backlight_set_color( 54+14, rgb.r, rgb.g, rgb.b ); // LD14 + } +#endif + } + } +} + +// This runs after another backlight effect and replaces +// colors already set +void backlight_effect_indicators(void) +{ + if ( g_config.caps_lock_indicator.index != 255 && + ( g_indicator_state & (1< 0 && g_any_key_hit > g_config.disable_after_timeout * 60 * 20)); + uint8_t effect = suspend_backlight ? 0 : g_config.effect; + + // Keep track of the effect used last time, + // detect change in effect, so each effect can + // have an optional initialization. + static uint8_t effect_last = 255; + bool initialize = effect != effect_last; + effect_last = effect; + + // this gets ticked at 20 Hz. + // each effect can opt to do calculations + // and/or request PWM buffer updates. + switch ( effect ) + { + case 0: + backlight_effect_all_off(); + break; + case 1: + backlight_effect_solid_color(); + break; + case 2: +#if defined(RGB_BACKLIGHT_M6_B) + backlight_effect_custom_colors(); +#else + backlight_effect_alphas_mods(); +#endif + break; + case 3: + backlight_effect_gradient_up_down(); + break; + case 4: + backlight_effect_raindrops( initialize ); + break; + case 5: + backlight_effect_cycle_all(); + break; + case 6: + backlight_effect_cycle_left_right(); + break; + case 7: + backlight_effect_cycle_up_down(); + break; + case 8: + backlight_effect_jellybean_raindrops( initialize ); + break; + case 9: + backlight_effect_cycle_radial1(); + break; + case 10: + backlight_effect_cycle_radial2(); + break; + default: + backlight_effect_all_off(); + break; + } + + if ( ! suspend_backlight ) + { +#if !defined(RGB_BACKLIGHT_M6_B) + backlight_effect_indicators(); +#endif + } +} + +void backlight_set_indicator_index( uint8_t *index, uint8_t row, uint8_t column ) +{ + if ( row >= MATRIX_ROWS ) + { + // Special value, 255=none, 254=all + *index = row; + } + else + { + map_row_column_to_led( row, column, index ); + } +} + +void backlight_get_indicator_row_col( uint8_t index, uint8_t *row, uint8_t *column ) +{ + if ( index == 255 || index == 254 ) + { + // Special value, 255=none, 254=all + *row = index; + *column = 0; + return; + } + for ( uint8_t r = 0; r < MATRIX_ROWS; r++ ) + { + for ( uint8_t c = 0; c < MATRIX_COLS; c++ ) + { + uint8_t i = 255; + map_row_column_to_led( r, c, &i ); + if ( i == index ) + { + *row = r; + *column = c; + return; + } + } + } +} + +// Some helpers for setting/getting HSV +void _set_color( HS *color, uint8_t *data ) +{ + color->h = data[0]; + color->s = data[1]; +} + +void _get_color( HS *color, uint8_t *data ) +{ + data[0] = color->h; + data[1] = color->s; +} + +void backlight_config_set_value( uint8_t *data ) +{ + bool reinitialize = false; + uint8_t *value_id = &(data[0]); + uint8_t *value_data = &(data[1]); + switch ( *value_id ) + { +#if defined (RGB_BACKLIGHT_ZEAL60) || defined(RGB_BACKLIGHT_ZEAL65) + case id_use_split_backspace: + { + g_config.use_split_backspace = (bool)*value_data; + reinitialize = true; + break; + } +#endif +#if defined (RGB_BACKLIGHT_ZEAL60) + case id_use_split_left_shift: + { + g_config.use_split_left_shift = (bool)*value_data; + reinitialize = true; + break; + } + case id_use_split_right_shift: + { + g_config.use_split_right_shift = (bool)*value_data; + reinitialize = true; + break; + } + case id_use_7u_spacebar: + { + g_config.use_7u_spacebar = (bool)*value_data; + reinitialize = true; + break; + } + case id_use_iso_enter: + { + g_config.use_iso_enter = (bool)*value_data; + reinitialize = true; + break; + } + case id_disable_hhkb_blocker_leds: + { + g_config.disable_hhkb_blocker_leds = (bool)*value_data; + reinitialize = true; + break; + } +#endif + case id_disable_when_usb_suspended: + { + g_config.disable_when_usb_suspended = (bool)*value_data; + break; + } + case id_disable_after_timeout: + { + g_config.disable_after_timeout = *value_data; + break; + } + case id_brightness: + { + g_config.brightness = *value_data; + break; + } + case id_effect: + { + g_config.effect = *value_data; + break; + } + case id_effect_speed: + { + g_config.effect_speed = *value_data; + break; + } + case id_color_1: + { + _set_color( &(g_config.color_1), value_data ); + break; + } + case id_color_2: + { + _set_color( &(g_config.color_2), value_data ); + break; + } + case id_caps_lock_indicator_color: + { + _set_color( &(g_config.caps_lock_indicator.color), value_data ); + break; + } + case id_caps_lock_indicator_row_col: + { + backlight_set_indicator_index( &(g_config.caps_lock_indicator.index), value_data[0], value_data[1] ); + break; + } + case id_layer_1_indicator_color: + { + _set_color( &(g_config.layer_1_indicator.color), value_data ); + break; + } + case id_layer_1_indicator_row_col: + { + backlight_set_indicator_index( &(g_config.layer_1_indicator.index), value_data[0], value_data[1] ); + break; + } + case id_layer_2_indicator_color: + { + _set_color( &(g_config.layer_2_indicator.color), value_data ); + break; + } + case id_layer_2_indicator_row_col: + { + backlight_set_indicator_index( &(g_config.layer_2_indicator.index), value_data[0], value_data[1] ); + break; + } + case id_layer_3_indicator_color: + { + _set_color( &(g_config.layer_3_indicator.color), value_data ); + break; + } + case id_layer_3_indicator_row_col: + { + backlight_set_indicator_index( &(g_config.layer_3_indicator.index), value_data[0], value_data[1] ); + break; + } + case id_alphas_mods: + { + for ( int i=0; i<5; i++ ) + { + g_config.alphas_mods[i] = ( *(value_data+i*2) << 8 ) | ( *(value_data+i*2+1) ); + } + } +#if defined(RGB_BACKLIGHT_M6_B) + case id_custom_color: + { + uint8_t index = value_data[0]; + if ( index >= 0 && index <= 6 ) + { + _set_color( &(g_config.custom_color[index]), &(value_data[1]) ); + } + } +#endif + } + + if ( reinitialize ) + { + backlight_init_drivers(); + } +} + +void backlight_config_get_value( uint8_t *data ) +{ + uint8_t *value_id = &(data[0]); + uint8_t *value_data = &(data[1]); + switch ( *value_id ) + { + case id_use_split_backspace: + { + *value_data = ( g_config.use_split_backspace ? 1 : 0 ); + break; + } + case id_use_split_left_shift: + { + *value_data = ( g_config.use_split_left_shift ? 1 : 0 ); + break; + } + case id_use_split_right_shift: + { + *value_data = ( g_config.use_split_right_shift ? 1 : 0 ); + break; + } + case id_use_7u_spacebar: + { + *value_data = ( g_config.use_7u_spacebar ? 1 : 0 ); + break; + } + case id_use_iso_enter: + { + *value_data = ( g_config.use_iso_enter ? 1 : 0 ); + break; + } + case id_disable_when_usb_suspended: + { + *value_data = ( g_config.disable_when_usb_suspended ? 1 : 0 ); + break; + } + case id_disable_hhkb_blocker_leds: + { + *value_data = ( g_config.disable_hhkb_blocker_leds ? 1 : 0 ); + break; + } + case id_disable_after_timeout: + { + *value_data = g_config.disable_after_timeout; + break; + } + case id_brightness: + { + *value_data = g_config.brightness; + break; + } + case id_effect: + { + *value_data = g_config.effect; + break; + } + case id_effect_speed: + { + *value_data = g_config.effect_speed; + break; + } + case id_color_1: + { + _get_color( &(g_config.color_1), value_data ); + break; + } + case id_color_2: + { + _get_color( &(g_config.color_2), value_data ); + break; + } + case id_caps_lock_indicator_color: + { + _get_color( &(g_config.caps_lock_indicator.color), value_data ); + break; + } + case id_caps_lock_indicator_row_col: + { + backlight_get_indicator_row_col( g_config.caps_lock_indicator.index, &(value_data[0]), &(value_data[1]) ); + break; + } + case id_layer_1_indicator_color: + { + _get_color( &(g_config.layer_1_indicator.color), value_data ); + break; + } + case id_layer_1_indicator_row_col: + { + backlight_get_indicator_row_col( g_config.layer_1_indicator.index, &(value_data[0]), &(value_data[1]) ); + break; + } + case id_layer_2_indicator_color: + { + _get_color( &(g_config.layer_2_indicator.color), value_data ); + break; + } + case id_layer_2_indicator_row_col: + { + backlight_get_indicator_row_col( g_config.layer_2_indicator.index, &(value_data[0]), &(value_data[1]) ); + break; + } + case id_layer_3_indicator_color: + { + _get_color( &(g_config.layer_3_indicator.color), value_data ); + break; + } + case id_layer_3_indicator_row_col: + { + backlight_get_indicator_row_col( g_config.layer_3_indicator.index, &(value_data[0]), &(value_data[1]) ); + break; + } + case id_alphas_mods: + { + for ( int i=0; i<5; i++ ) + { + *(value_data+i*2) = g_config.alphas_mods[i] >> 8; + *(value_data+i*2+1) = g_config.alphas_mods[i] & 0xFF; + } + } +#if defined(RGB_BACKLIGHT_M6_B) + case id_custom_color: + { + uint8_t index = value_data[0]; + if ( index >= 0 && index <= 6 ) + { + _get_color( &(g_config.custom_color[index]), &(value_data[1]) ); + } + } +#endif + } +} + +void backlight_config_set_alphas_mods( uint16_t *alphas_mods ) +{ + for ( int i=0; i<5; i++ ) + { + g_config.alphas_mods[i] = alphas_mods[i]; + } + + backlight_config_save(); +} + +void backlight_config_load(void) +{ + eeprom_read_block( &g_config, ((void*)RGB_BACKLIGHT_CONFIG_EEPROM_ADDR), sizeof(backlight_config) ); +} + +void backlight_config_save(void) +{ + eeprom_update_block( &g_config, ((void*)RGB_BACKLIGHT_CONFIG_EEPROM_ADDR), sizeof(backlight_config) ); +} + +void backlight_init_drivers(void) +{ + // Initialize I2C + i2c_init(); + +#if defined(RGB_BACKLIGHT_M6_B) + IS31FL3218_init(); +#elif defined(RGB_BACKLIGHT_HS60) + IS31FL3733_init( ISSI_ADDR_1 ); + + for ( int index = 0; index < BACKLIGHT_LED_COUNT; index++ ) + { +#if defined (HS60_ANSI) + bool enabled = !( ( index == 48-1 ) || //LA48 + ( index == 51-1 ) || //LA51 + ( index == 61-1 ) ); //LA61 +#elif defined (HS60_HHKB) + bool enabled = !( ( index == 61-1 ) || //LA61 + ( index == 62-1 ) ); //LA62 +#else //HS60_ISO + bool enabled = !( ( index == 51-1 ) || //LA51 + ( index == 61-1 ) ); //LA61 +#endif + // This only caches it for later + IS31FL3733_set_led_control_register( index, enabled, enabled, enabled ); + } + // This actually updates the LED drivers + IS31FL3733_update_led_control_registers( ISSI_ADDR_1, ISSI_ADDR_2 ); +#else + IS31FL3731_init( ISSI_ADDR_1 ); + IS31FL3731_init( ISSI_ADDR_2 ); + + for ( int index = 0; index < BACKLIGHT_LED_COUNT; index++ ) + { + // OR the possible "disabled" cases together, then NOT the result to get the enabled state + // LC6 LD13 not present on Zeal65 +#if defined (RGB_BACKLIGHT_ZEAL65) + bool enabled = !( ( index == 18+5 && !g_config.use_split_backspace ) || // LB5 + ( index == 36+6 ) || // LC6 + ( index == 54+13 ) ); // LD13 +#elif defined (RGB_BACKLIGHT_KOYU) + bool enabled = !( ( index == 36+15 ) || // LC15 + ( index == 54+13 ) || // LD13 + ( index == 54+17 ) ); // LD17 +#elif defined (RGB_BACKLIGHT_M60_A) + bool enabled = !( + // LB6 LB7 LB8 LB15 LB16 LB17 not present on M60-A + ( index == 18+6 ) || // LB6 + ( index == 18+7 ) || // LB7 + ( index == 18+8 ) || // LB8 + ( index == 18+15 ) || // LB15 + ( index == 18+16 ) || // LB16 + ( index == 18+17 ) || // LB17 + // HHKB blockers (LC17, LD17) and ISO extra keys (LC15,LD13) not present on M60-A + ( index == 36+17 ) || // LC17 + ( index == 54+17 ) || // LD17 + ( index == 36+15 ) || // LC15 + ( index == 54+13 ) ); // LD13 +#elif defined (RGB_BACKLIGHT_ZEAL60) + // LB6 LB7 LB8 LB15 LB16 LB17 not present on Zeal60 + bool enabled = !( ( index == 18+5 && !g_config.use_split_backspace ) || // LB5 + ( index == 36+15 && !g_config.use_split_left_shift ) || // LC15 + ( index == 54+8 && !g_config.use_split_right_shift ) || // LD8 + ( index == 54+13 && g_config.use_7u_spacebar ) || // LD13 + ( index == 36+17 && g_config.disable_hhkb_blocker_leds ) || // LC17 + ( index == 54+17 && g_config.disable_hhkb_blocker_leds ) || // LD17 + ( index == 18+6 ) || // LB6 + ( index == 18+7 ) || // LB7 + ( index == 18+8 ) || // LB8 + ( index == 18+15 ) || // LB15 + ( index == 18+16 ) || // LB16 + ( index == 18+17 ) ); // LB17 +#endif + // This only caches it for later + IS31FL3731_set_led_control_register( index, enabled, enabled, enabled ); + } + // This actually updates the LED drivers + IS31FL3731_update_led_control_registers( ISSI_ADDR_1, ISSI_ADDR_2 ); +#endif // !defined(RGB_BACKLIGHT_M6_B) + + // TODO: put the 1 second startup delay here? + + // clear the key hits + for ( int led=0; ledevent.pressed ) + { + backlight_set_key_hit( record->event.key.row, record->event.key.col ); + } + + switch(keycode) + { + case BR_INC: + if (record->event.pressed) + { + backlight_brightness_increase(); + } + return false; + break; + case BR_DEC: + if (record->event.pressed) + { + backlight_brightness_decrease(); + } + return false; + break; + case EF_INC: + if (record->event.pressed) + { + backlight_effect_increase(); + } + return false; + break; + case EF_DEC: + if (record->event.pressed) + { + backlight_effect_decrease(); + } + return false; + break; + case ES_INC: + if (record->event.pressed) + { + backlight_effect_speed_increase(); + } + return false; + break; + case ES_DEC: + if (record->event.pressed) + { + backlight_effect_speed_decrease(); + } + return false; + break; + case H1_INC: + if (record->event.pressed) + { + backlight_color_1_hue_increase(); + } + return false; + break; + case H1_DEC: + if (record->event.pressed) + { + backlight_color_1_hue_decrease(); + } + return false; + break; + case S1_INC: + if (record->event.pressed) + { + backlight_color_1_sat_increase(); + } + return false; + break; + case S1_DEC: + if (record->event.pressed) + { + backlight_color_1_sat_decrease(); + break; + } + return false; + break; + case H2_INC: + if (record->event.pressed) + { + backlight_color_2_hue_increase(); + } + return false; + break; + case H2_DEC: + if (record->event.pressed) + { + backlight_color_2_hue_decrease(); + } + return false; + break; + case S2_INC: + if (record->event.pressed) + { + backlight_color_2_sat_increase(); + } + return false; + break; + case S2_DEC: + if (record->event.pressed) + { + backlight_color_2_sat_decrease(); + break; + } + return false; + break; + } + + return true; +} + +// Deals with the messy details of incrementing an integer +uint8_t increment( uint8_t value, uint8_t step, uint8_t min, uint8_t max ) +{ + int16_t new_value = value; + new_value += step; + return MIN( MAX( new_value, min ), max ); +} + +uint8_t decrement( uint8_t value, uint8_t step, uint8_t min, uint8_t max ) +{ + int16_t new_value = value; + new_value -= step; + return MIN( MAX( new_value, min ), max ); +} + +void backlight_effect_increase(void) +{ + g_config.effect = increment( g_config.effect, 1, 0, BACKLIGHT_EFFECT_MAX ); + backlight_config_save(); +} + +void backlight_effect_decrease(void) +{ + g_config.effect = decrement( g_config.effect, 1, 0, BACKLIGHT_EFFECT_MAX ); + backlight_config_save(); +} + +void backlight_effect_speed_increase(void) +{ + g_config.effect_speed = increment( g_config.effect_speed, 1, 0, 3 ); + backlight_config_save(); +} + +void backlight_effect_speed_decrease(void) +{ + g_config.effect_speed = decrement( g_config.effect_speed, 1, 0, 3 ); + backlight_config_save(); +} + +void backlight_brightness_increase(void) +{ + g_config.brightness = increment( g_config.brightness, 8, 0, 255 ); + backlight_config_save(); +} + +void backlight_brightness_decrease(void) +{ + g_config.brightness = decrement( g_config.brightness, 8, 0, 255 ); + backlight_config_save(); +} + +void backlight_color_1_hue_increase(void) +{ + g_config.color_1.h = increment( g_config.color_1.h, 8, 0, 255 ); + backlight_config_save(); +} + +void backlight_color_1_hue_decrease(void) +{ + g_config.color_1.h = decrement( g_config.color_1.h, 8, 0, 255 ); + backlight_config_save(); +} + +void backlight_color_1_sat_increase(void) +{ + g_config.color_1.s = increment( g_config.color_1.s, 8, 0, 255 ); + backlight_config_save(); +} + +void backlight_color_1_sat_decrease(void) +{ + g_config.color_1.s = decrement( g_config.color_1.s, 8, 0, 255 ); + backlight_config_save(); +} + +void backlight_color_2_hue_increase(void) +{ + g_config.color_2.h = increment( g_config.color_2.h, 8, 0, 255 ); + backlight_config_save(); +} + +void backlight_color_2_hue_decrease(void) +{ + g_config.color_2.h = decrement( g_config.color_2.h, 8, 0, 255 ); + backlight_config_save(); +} + +void backlight_color_2_sat_increase(void) +{ + g_config.color_2.s = increment( g_config.color_2.s, 8, 0, 255 ); + backlight_config_save(); +} + +void backlight_color_2_sat_decrease(void) +{ + g_config.color_2.s = decrement( g_config.color_2.s, 8, 0, 255 ); + backlight_config_save(); +} + +#if defined(RGB_DEBUGGING_ONLY) +void backlight_test_led( uint8_t index, bool red, bool green, bool blue ) +{ + for ( int i=0; i. + */ +#pragma once + +#if RGB_BACKLIGHT_ENABLED +#else +#error rgb_backlight.h included when RGB_BACKLIGHT_ENABLED == 0 +#endif // RGB_BACKLIGHT_ENABLED + +#include +#include + +#include "quantum/color.h" + +typedef struct PACKED +{ + uint8_t h; + uint8_t s; +} HS; + +typedef struct +{ + HS color; + uint8_t index; +} backlight_config_indicator; + +typedef struct +{ + bool use_split_backspace:1; // | + bool use_split_left_shift:1; // | + bool use_split_right_shift:1; // | + bool use_7u_spacebar:1; // | + bool use_iso_enter:1; // | + bool disable_when_usb_suspended:1; // | + bool disable_hhkb_blocker_leds:1; // | + bool __pad7:1; // 1 byte + uint8_t disable_after_timeout; // 1 byte + uint8_t brightness; // 1 byte + uint8_t effect; // 1 byte + uint8_t effect_speed; // 1 byte + HS color_1; // 2 bytes + HS color_2; // 2 bytes + backlight_config_indicator caps_lock_indicator; // 3 bytes + backlight_config_indicator layer_1_indicator; // 3 bytes + backlight_config_indicator layer_2_indicator; // 3 bytes + backlight_config_indicator layer_3_indicator; // 3 bytes + uint16_t alphas_mods[5]; // 10 bytes +#if defined(RGB_BACKLIGHT_M6_B) + HS custom_color[6]; // 12 bytes +#endif +} backlight_config; // = 31 bytes (M6-B = 43 bytes) + +void backlight_config_load(void); +void backlight_config_save(void); +void backlight_config_set_value( uint8_t *data ); +void backlight_config_get_value( uint8_t *data ); + +void backlight_init_drivers(void); + +void backlight_timer_init(void); +void backlight_timer_enable(void); +void backlight_timer_disable(void); + +void backlight_set_suspend_state(bool state); +void backlight_set_indicator_state(uint8_t state); + +// This should not be called from an interrupt +// (eg. from a timer interrupt). +// Call this while idle (in between matrix scans). +// If the buffer is dirty, it will update the driver with the buffer. +void backlight_update_pwm_buffers(void); + +// Handle backlight specific keycodes +bool process_record_backlight(uint16_t keycode, keyrecord_t *record); + +void backlight_set_key_hit(uint8_t row, uint8_t col); + +void backlight_effect_increase(void); +void backlight_effect_decrease(void); +void backlight_effect_speed_increase(void); +void backlight_effect_speed_decrease(void); + +void backlight_brightness_increase(void); +void backlight_brightness_decrease(void); + +void backlight_color_1_hue_increase(void); +void backlight_color_1_hue_decrease(void); +void backlight_color_1_sat_increase(void); +void backlight_color_1_sat_decrease(void); +void backlight_color_2_hue_increase(void); +void backlight_color_2_hue_decrease(void); +void backlight_color_2_sat_increase(void); +void backlight_color_2_sat_decrease(void); + +void backlight_test_led( uint8_t index, bool red, bool green, bool blue ); +void backlight_debug_led(bool state); + diff --git a/users/stanrc85/rgb_backlight_api.h b/users/stanrc85/rgb_backlight_api.h new file mode 100644 index 00000000000..680ba4d99c2 --- /dev/null +++ b/users/stanrc85/rgb_backlight_api.h @@ -0,0 +1,43 @@ +/* Copyright 2017 Jason Williams (Wilba) + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ +#pragma once + +enum backlight_config_value +{ + id_use_split_backspace = 0x01, + id_use_split_left_shift = 0x02, + id_use_split_right_shift = 0x03, + id_use_7u_spacebar = 0x04, + id_use_iso_enter = 0x05, + id_disable_hhkb_blocker_leds = 0x06, + id_disable_when_usb_suspended = 0x07, + id_disable_after_timeout = 0x08, + id_brightness = 0x09, + id_effect = 0x0A, + id_effect_speed = 0x0B, + id_color_1 = 0x0C, + id_color_2 = 0x0D, + id_caps_lock_indicator_color = 0x0E, + id_caps_lock_indicator_row_col = 0x0F, + id_layer_1_indicator_color = 0x10, + id_layer_1_indicator_row_col = 0x11, + id_layer_2_indicator_color = 0x12, + id_layer_2_indicator_row_col = 0x13, + id_layer_3_indicator_color = 0x14, + id_layer_3_indicator_row_col = 0x15, + id_alphas_mods = 0x16, + id_custom_color = 0x17 +}; diff --git a/users/stanrc85/rgb_backlight_keycodes.h b/users/stanrc85/rgb_backlight_keycodes.h new file mode 100644 index 00000000000..ba7f03f89d4 --- /dev/null +++ b/users/stanrc85/rgb_backlight_keycodes.h @@ -0,0 +1,34 @@ +/* Copyright 2017 Jason Williams (Wilba) + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ +#pragma once + +// This is hardcoded at 0x5F00 so it's well after keycode value SAFE_RANGE +enum backlight_keycodes { + BR_INC = 0x5F00, // backlight brightness increase + BR_DEC, // backlight brightness decrease + EF_INC, // backlight effect increase + EF_DEC, // backlight effect decrease + ES_INC, + ES_DEC, + H1_INC, + H1_DEC, + S1_INC, + S1_DEC, + H2_INC, + H2_DEC, + S2_INC, + S2_DEC +}; From c98247e3dd2958bd2d8969dc75170e7e2757b895 Mon Sep 17 00:00:00 2001 From: XScorpion2 Date: Tue, 2 Apr 2019 19:24:14 -0500 Subject: [PATCH 010/171] RGB Matrix Overhaul (#5372) * RGB Matrix overhaul Breakout of animations to separate files Integration of optimized int based math lib Overhaul of rgb_matrix.c and animations for performance * Updating effect function api for future extensions * Combined the keypresses || keyreleases define checks into a single define so I stop forgetting it where necessary * Moving define RGB_MATRIX_KEYREACTIVE_ENABLED earlier in the include chain --- docs/feature_rgb_matrix.md | 270 ++-- keyboards/dztech/dz40rgb/config.h | 1 - keyboards/dztech/dz60rgb/config.h | 1 - keyboards/ergodox_ez/config.h | 1 - keyboards/hs60/v1/config.h | 1 - .../community/ergodox/drashna_glow/config.h | 1 - layouts/community/ortho_4x12/drashna/config.h | 1 - lib/lib8tion/LICENSE | 20 + lib/lib8tion/lib8tion.c | 242 ++++ lib/lib8tion/lib8tion.h | 934 +++++++++++++ lib/lib8tion/math8.h | 552 ++++++++ lib/lib8tion/random8.h | 94 ++ lib/lib8tion/scale8.h | 542 ++++++++ lib/lib8tion/trig8.h | 259 ++++ quantum/color.c | 2 + quantum/quantum.c | 14 +- quantum/rgb_matrix.c | 1175 ++++++----------- quantum/rgb_matrix.h | 154 +-- .../rgb_matrix_animations/alpha_mods_anim.h | 26 + .../rgb_matrix_animations/breathing_anim.h | 19 + .../rgb_matrix_animations/cycle_all_anim.h | 21 + .../cycle_left_right_anim.h | 22 + .../cycle_up_down_anim.h | 22 + .../rgb_matrix_animations/digital_rain_anim.h | 74 ++ .../rgb_matrix_animations/dual_beacon_anim.h | 24 + .../gradient_up_down_anim.h | 22 + .../jellybean_raindrops_anim.h | 30 + .../rainbow_beacon_anim.h | 24 + .../rainbow_moving_chevron_anim.h | 22 + .../rainbow_pinwheels_anim.h | 24 + .../rgb_matrix_animations/raindrops_anim.h | 40 + .../rgb_matrix_animations/solid_color_anim.h | 14 + .../solid_reactive_anim.h | 33 + .../solid_reactive_simple_anim.h | 32 + .../rgb_matrix_animations/solid_splash_anim.h | 42 + quantum/rgb_matrix_animations/splash_anim.h | 44 + quantum/rgb_matrix_types.h | 90 ++ 37 files changed, 3879 insertions(+), 1010 deletions(-) create mode 100644 lib/lib8tion/LICENSE create mode 100644 lib/lib8tion/lib8tion.c create mode 100644 lib/lib8tion/lib8tion.h create mode 100644 lib/lib8tion/math8.h create mode 100644 lib/lib8tion/random8.h create mode 100644 lib/lib8tion/scale8.h create mode 100644 lib/lib8tion/trig8.h create mode 100644 quantum/rgb_matrix_animations/alpha_mods_anim.h create mode 100644 quantum/rgb_matrix_animations/breathing_anim.h create mode 100644 quantum/rgb_matrix_animations/cycle_all_anim.h create mode 100644 quantum/rgb_matrix_animations/cycle_left_right_anim.h create mode 100644 quantum/rgb_matrix_animations/cycle_up_down_anim.h create mode 100644 quantum/rgb_matrix_animations/digital_rain_anim.h create mode 100644 quantum/rgb_matrix_animations/dual_beacon_anim.h create mode 100644 quantum/rgb_matrix_animations/gradient_up_down_anim.h create mode 100644 quantum/rgb_matrix_animations/jellybean_raindrops_anim.h create mode 100644 quantum/rgb_matrix_animations/rainbow_beacon_anim.h create mode 100644 quantum/rgb_matrix_animations/rainbow_moving_chevron_anim.h create mode 100644 quantum/rgb_matrix_animations/rainbow_pinwheels_anim.h create mode 100644 quantum/rgb_matrix_animations/raindrops_anim.h create mode 100644 quantum/rgb_matrix_animations/solid_color_anim.h create mode 100644 quantum/rgb_matrix_animations/solid_reactive_anim.h create mode 100644 quantum/rgb_matrix_animations/solid_reactive_simple_anim.h create mode 100644 quantum/rgb_matrix_animations/solid_splash_anim.h create mode 100644 quantum/rgb_matrix_animations/splash_anim.h create mode 100644 quantum/rgb_matrix_types.h diff --git a/docs/feature_rgb_matrix.md b/docs/feature_rgb_matrix.md index 8d1efb12a27..ec121895459 100644 --- a/docs/feature_rgb_matrix.md +++ b/docs/feature_rgb_matrix.md @@ -10,39 +10,45 @@ If you want to use single color LED's you should use the [LED Matrix Subsystem]( There is basic support for addressable RGB matrix lighting with the I2C IS31FL3731 RGB controller. To enable it, add this to your `rules.mk`: - RGB_MATRIX_ENABLE = IS31FL3731 +```C +RGB_MATRIX_ENABLE = IS31FL3731 +``` Configure the hardware via your `config.h`: - // This is a 7-bit address, that gets left-shifted and bit 0 - // set to 0 for write, 1 for read (as per I2C protocol) - // The address will vary depending on your wiring: - // 0b1110100 AD <-> GND - // 0b1110111 AD <-> VCC - // 0b1110101 AD <-> SCL - // 0b1110110 AD <-> SDA - #define DRIVER_ADDR_1 0b1110100 - #define DRIVER_ADDR_2 0b1110110 +```C +// This is a 7-bit address, that gets left-shifted and bit 0 +// set to 0 for write, 1 for read (as per I2C protocol) +// The address will vary depending on your wiring: +// 0b1110100 AD <-> GND +// 0b1110111 AD <-> VCC +// 0b1110101 AD <-> SCL +// 0b1110110 AD <-> SDA +#define DRIVER_ADDR_1 0b1110100 +#define DRIVER_ADDR_2 0b1110110 - #define DRIVER_COUNT 2 - #define DRIVER_1_LED_TOTAL 25 - #define DRIVER_2_LED_TOTAL 24 - #define DRIVER_LED_TOTAL DRIVER_1_LED_TOTAL + DRIVER_2_LED_TOTAL +#define DRIVER_COUNT 2 +#define DRIVER_1_LED_TOTAL 25 +#define DRIVER_2_LED_TOTAL 24 +#define DRIVER_LED_TOTAL DRIVER_1_LED_TOTAL + DRIVER_2_LED_TOTAL +``` Currently only 2 drivers are supported, but it would be trivial to support all 4 combinations. Define these arrays listing all the LEDs in your `.c`: - const is31_led g_is31_leds[DRIVER_LED_TOTAL] = { - /* Refer to IS31 manual for these locations - * driver - * | R location - * | | G location - * | | | B location - * | | | | */ - {0, C1_3, C2_3, C3_3}, - .... - } +```C +const is31_led g_is31_leds[DRIVER_LED_TOTAL] = { +/* Refer to IS31 manual for these locations + * driver + * | R location + * | | G location + * | | | B location + * | | | | */ + {0, C1_3, C2_3, C3_3}, + .... +} +``` Where `Cx_y` is the location of the LED in the matrix defined by [the datasheet](http://www.issi.com/WW/pdf/31FL3731.pdf) and the header file `drivers/issi/is31fl3731.h`. The `driver` is the index of the driver you defined in your `config.h` (`0` or `1` right now). @@ -50,60 +56,70 @@ Where `Cx_y` is the location of the LED in the matrix defined by [the datasheet] There is basic support for addressable RGB matrix lighting with the I2C IS31FL3733 RGB controller. To enable it, add this to your `rules.mk`: - RGB_MATRIX_ENABLE = IS31FL3733 +```C +RGB_MATRIX_ENABLE = IS31FL3733 +``` Configure the hardware via your `config.h`: - // This is a 7-bit address, that gets left-shifted and bit 0 - // set to 0 for write, 1 for read (as per I2C protocol) - // The address will vary depending on your wiring: - // 00 <-> GND - // 01 <-> SCL - // 10 <-> SDA - // 11 <-> VCC - // ADDR1 represents A1:A0 of the 7-bit address. - // ADDR2 represents A3:A2 of the 7-bit address. - // The result is: 0b101(ADDR2)(ADDR1) - #define DRIVER_ADDR_1 0b1010000 - #define DRIVER_ADDR_2 0b1010000 // this is here for compliancy reasons. +```C +// This is a 7-bit address, that gets left-shifted and bit 0 +// set to 0 for write, 1 for read (as per I2C protocol) +// The address will vary depending on your wiring: +// 00 <-> GND +// 01 <-> SCL +// 10 <-> SDA +// 11 <-> VCC +// ADDR1 represents A1:A0 of the 7-bit address. +// ADDR2 represents A3:A2 of the 7-bit address. +// The result is: 0b101(ADDR2)(ADDR1) +#define DRIVER_ADDR_1 0b1010000 +#define DRIVER_ADDR_2 0b1010000 // this is here for compliancy reasons. - #define DRIVER_COUNT 2 - #define DRIVER_1_LED_TOTAL 64 - #define DRIVER_LED_TOTAL DRIVER_1_LED_TOTAL +#define DRIVER_COUNT 2 +#define DRIVER_1_LED_TOTAL 64 +#define DRIVER_LED_TOTAL DRIVER_1_LED_TOTAL +``` Currently only a single drivers is supported, but it would be trivial to support all 4 combinations. For now define `DRIVER_ADDR_2` as `DRIVER_ADDR_1` Define these arrays listing all the LEDs in your `.c`: - const is31_led g_is31_leds[DRIVER_LED_TOTAL] = { - /* Refer to IS31 manual for these locations - * driver - * | R location - * | | G location - * | | | B location - * | | | | */ - {0, B_1, A_1, C_1}, - .... - } +```C +const is31_led g_is31_leds[DRIVER_LED_TOTAL] = { +/* Refer to IS31 manual for these locations + * driver + * | R location + * | | G location + * | | | B location + * | | | | */ + {0, B_1, A_1, C_1}, + .... +} +``` Where `X_Y` is the location of the LED in the matrix defined by [the datasheet](http://www.issi.com/WW/pdf/31FL3733.pdf) and the header file `drivers/issi/is31fl3733.h`. The `driver` is the index of the driver you defined in your `config.h` (Only `0` right now). From this point forward the configuration is the same for all the drivers. - const rgb_led g_rgb_leds[DRIVER_LED_TOTAL] = { - /* {row | col << 4} - * | {x=0..224, y=0..64} - * | | modifier - * | | | */ - {{0|(0<<4)}, {20.36*0, 21.33*0}, 1}, - {{0|(1<<4)}, {20.36*1, 21.33*0}, 1}, - .... - } +```C +const rgb_led g_rgb_leds[DRIVER_LED_TOTAL] = { +/* {row | col << 4} + * | {x=0..224, y=0..64} + * | | modifier + * | | | */ + {{0|(0<<4)}, {20.36*0, 21.33*0}, 1}, + {{0|(1<<4)}, {20.36*1, 21.33*0}, 1}, + .... +} +``` The format for the matrix position used in this array is `{row | (col << 4)}`. The `x` is between (inclusive) 0-224, and `y` is between (inclusive) 0-64. The easiest way to calculate these positions is: - x = 224 / ( NUMBER_OF_COLS - 1 ) * ROW_POSITION - y = 64 / (NUMBER_OF_ROWS - 1 ) * COL_POSITION +```C +x = 224 / ( NUMBER_OF_COLS - 1 ) * ROW_POSITION +y = 64 / (NUMBER_OF_ROWS - 1 ) * COL_POSITION +``` Where all variables are decimels/floats. @@ -113,48 +129,50 @@ Where all variables are decimels/floats. All RGB keycodes are currently shared with the RGBLIGHT system: - * `RGB_TOG` - toggle - * `RGB_MOD` - cycle through modes - * `RGB_HUI` - increase hue - * `RGB_HUD` - decrease hue - * `RGB_SAI` - increase saturation - * `RGB_SAD` - decrease saturation - * `RGB_VAI` - increase value - * `RGB_VAD` - decrease value - * `RGB_SPI` - increase speed effect (no EEPROM support) - * `RGB_SPD` - decrease speed effect (no EEPROM support) - - - * `RGB_MODE_*` keycodes will generally work, but are not currently mapped to the correct effects for the RGB Matrix system +* `RGB_TOG` - toggle +* `RGB_MOD` - cycle through modes +* `RGB_HUI` - increase hue +* `RGB_HUD` - decrease hue +* `RGB_SAI` - increase saturation +* `RGB_SAD` - decrease saturation +* `RGB_VAI` - increase value +* `RGB_VAD` - decrease value +* `RGB_SPI` - increase speed effect (no EEPROM support) +* `RGB_SPD` - decrease speed effect (no EEPROM support) +* `RGB_MODE_*` keycodes will generally work, but are not currently mapped to the correct effects for the RGB Matrix system ## RGB Matrix Effects -These are the effects that are currently available: +All effects have been configured to support current configuration values (Hue, Saturation, Value, & Speed) unless otherwise noted below. These are the effects that are currently available: - enum rgb_matrix_effects { - RGB_MATRIX_SOLID_COLOR = 1, - RGB_MATRIX_ALPHAS_MODS, - RGB_MATRIX_DUAL_BEACON, - RGB_MATRIX_GRADIENT_UP_DOWN, - RGB_MATRIX_RAINDROPS, - RGB_MATRIX_CYCLE_ALL, - RGB_MATRIX_CYCLE_LEFT_RIGHT, - RGB_MATRIX_CYCLE_UP_DOWN, - RGB_MATRIX_RAINBOW_BEACON, - RGB_MATRIX_RAINBOW_PINWHEELS, - RGB_MATRIX_RAINBOW_MOVING_CHEVRON, - RGB_MATRIX_JELLYBEAN_RAINDROPS, - RGB_MATRIX_DIGITAL_RAIN, - #ifdef RGB_MATRIX_KEYPRESSES - RGB_MATRIX_SOLID_REACTIVE, - RGB_MATRIX_REACTIVE_SIMPLE, - RGB_MATRIX_SPLASH, - RGB_MATRIX_MULTISPLASH, - RGB_MATRIX_SOLID_SPLASH, - RGB_MATRIX_SOLID_MULTISPLASH, - #endif - RGB_MATRIX_EFFECT_MAX - }; +```C +enum rgb_matrix_effects { + RGB_MATRIX_NONE = 0, + RGB_MATRIX_SOLID_COLOR = 1, // Static single hue, no speed support + RGB_MATRIX_ALPHAS_MODS, // Static dual hue, speed is hue for secondary hue + RGB_MATRIX_GRADIENT_UP_DOWN, // Static gradient top to bottom, speed controls how much gradient changes + RGB_MATRIX_BREATHING, // Single hue brightness cycling animation + RGB_MATRIX_CYCLE_ALL, // Full keyboard solid hue cycling through full gradient + RGB_MATRIX_CYCLE_LEFT_RIGHT, // Full gradient scrolling left to right + RGB_MATRIX_CYCLE_UP_DOWN, // Full gradient scrolling top to bottom + RGB_MATRIX_RAINBOW_MOVING_CHEVRON, // Full gradent Chevron shapped scrolling left to right + RGB_MATRIX_DUAL_BEACON, // Full gradient spinning around center of keyboard + RGB_MATRIX_RAINBOW_BEACON, // Full tighter gradient spinning around center of keyboard + RGB_MATRIX_RAINBOW_PINWHEELS, // Full dual gradients spinning two halfs of keyboard + RGB_MATRIX_RAINDROPS, // Randomly changes a single key's hue + RGB_MATRIX_JELLYBEAN_RAINDROPS, // Randomly changes a single key's hue and saturation + RGB_MATRIX_DIGITAL_RAIN, // That famous computer simulation +#if defined(RGB_MATRIX_KEYPRESSES) || defined(RGB_MATRIX_KEYRELEASES) + RGB_MATRIX_SOLID_REACTIVE_SIMPLE, // Pulses keys hit to hue & value then fades value out + RGB_MATRIX_SOLID_REACTIVE, // Static single hue, pulses keys hit to shifted hue then fades to current hue + RGB_MATRIX_SPLASH, // Full gradient & value pulse away from a single key hit then fades value out + RGB_MATRIX_MULTISPLASH, // Full gradient & value pulse away from multiple key hits then fades value out + RGB_MATRIX_SOLID_SPLASH, // Hue & value pulse away from a single key hit then fades value out + RGB_MATRIX_SOLID_MULTISPLASH, // Hue & value pulse away from multiple key hits then fades value out +#endif + RGB_MATRIX_EFFECT_MAX +}; +``` You can disable a single effect by defining `DISABLE_[EFFECT_NAME]` in your `config.h`: @@ -162,19 +180,20 @@ You can disable a single effect by defining `DISABLE_[EFFECT_NAME]` in your `con |Define |Description | |---------------------------------------------------|--------------------------------------------| |`#define DISABLE_RGB_MATRIX_ALPHAS_MODS` |Disables `RGB_MATRIX_ALPHAS_MODS` | -|`#define DISABLE_RGB_MATRIX_DUAL_BEACON` |Disables `RGB_MATRIX_DUAL_BEACON` | |`#define DISABLE_RGB_MATRIX_GRADIENT_UP_DOWN` |Disables `RGB_MATRIX_GRADIENT_UP_DOWN` | -|`#define DISABLE_RGB_MATRIX_RAINDROPS` |Disables `RGB_MATRIX_RAINDROPS` | +|`#define DISABLE_RGB_MATRIX_BREATHING` |Disables `RGB_MATRIX_BREATHING` | |`#define DISABLE_RGB_MATRIX_CYCLE_ALL` |Disables `RGB_MATRIX_CYCLE_ALL` | |`#define DISABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT` |Disables `RGB_MATRIX_CYCLE_LEFT_RIGHT` | |`#define DISABLE_RGB_MATRIX_CYCLE_UP_DOWN` |Disables `RGB_MATRIX_CYCLE_UP_DOWN` | +|`#define DISABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON`|Disables `RGB_MATRIX_RAINBOW_MOVING_CHEVRON`| +|`#define DISABLE_RGB_MATRIX_DUAL_BEACON` |Disables `RGB_MATRIX_DUAL_BEACON` | |`#define DISABLE_RGB_MATRIX_RAINBOW_BEACON` |Disables `RGB_MATRIX_RAINBOW_BEACON` | |`#define DISABLE_RGB_MATRIX_RAINBOW_PINWHEELS` |Disables `RGB_MATRIX_RAINBOW_PINWHEELS` | -|`#define DISABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON`|Disables `RGB_MATRIX_RAINBOW_MOVING_CHEVRON`| +|`#define DISABLE_RGB_MATRIX_RAINDROPS` |Disables `RGB_MATRIX_RAINDROPS` | |`#define DISABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS` |Disables `RGB_MATRIX_JELLYBEAN_RAINDROPS` | |`#define DISABLE_RGB_MATRIX_DIGITAL_RAIN` |Disables `RGB_MATRIX_DIGITAL_RAIN` | |`#define DISABLE_RGB_MATRIX_SOLID_REACTIVE` |Disables `RGB_MATRIX_SOLID_REACTIVE` | -|`#define DISABLE_RGB_MATRIX_REACTIVE_SIMPLE` |Disables `RGB_MATRIX_REACTIVE_SIMPLE` | +|`#define DISABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE` |Disables `RGB_MATRIX_SOLID_REACTIVE_SIMPLEE`| |`#define DISABLE_RGB_MATRIX_SPLASH` |Disables `RGB_MATRIX_SPLASH` | |`#define DISABLE_RGB_MATRIX_MULTISPLASH` |Disables `RGB_MATRIX_MULTISPLASH` | |`#define DISABLE_RGB_MATRIX_SOLID_SPLASH` |Disables `RGB_MATRIX_SOLID_SPLASH` | @@ -185,26 +204,33 @@ You can disable a single effect by defining `DISABLE_[EFFECT_NAME]` in your `con Custom layer effects can be done by defining this in your `.c`: - void rgb_matrix_indicators_kb(void) { - rgb_matrix_set_color(index, red, green, blue); - } +```C +void rgb_matrix_indicators_kb(void) { + rgb_matrix_set_color(index, red, green, blue); +} +``` A similar function works in the keymap as `rgb_matrix_indicators_user`. ## Additional `config.h` Options - #define RGB_MATRIX_KEYPRESSES // reacts to keypresses (will slow down matrix scan by a lot) - #define RGB_MATRIX_KEYRELEASES // reacts to keyreleases (not recommened) - #define RGB_DISABLE_AFTER_TIMEOUT 0 // number of ticks to wait until disabling effects - #define RGB_DISABLE_WHEN_USB_SUSPENDED false // turn off effects when suspended - #define RGB_MATRIX_SKIP_FRAMES 1 // number of frames to skip when displaying animations (0 is full effect) if not defined defaults to 1 - #define RGB_MATRIX_MAXIMUM_BRIGHTNESS 200 // limits maximum brightness of LEDs to 200 out of 255. If not defined maximum brightness is set to 255 +```C +#define RGB_MATRIX_KEYPRESSES // reacts to keypresses +#define RGB_MATRIX_KEYRELEASES // reacts to keyreleases (instead of keypresses) +#define RGB_DISABLE_AFTER_TIMEOUT 0 // number of ticks to wait until disabling effects +#define RGB_DISABLE_WHEN_USB_SUSPENDED false // turn off effects when suspended +#define RGB_MATRIX_LED_PROCESS_LIMIT (DRIVER_LED_TOTAL + 4) / 5 // limits the number of LEDs to process in an animation per task run (increases keyboard responsiveness) +#define RGB_MATRIX_LED_FLUSH_LIMIT 16 // limits in milliseconds how frequently an animation will update the LEDs. 16 (16ms) is equivalent to limiting to 60fps (increases keyboard responsiveness) +#define RGB_MATRIX_MAXIMUM_BRIGHTNESS 200 // limits maximum brightness of LEDs to 200 out of 255. If not defined maximum brightness is set to 255 +``` ## EEPROM storage The EEPROM for it is currently shared with the RGBLIGHT system (it's generally assumed only one RGB would be used at a time), but could be configured to use its own 32bit address with: - #define EECONFIG_RGB_MATRIX (uint32_t *)16 +```C +#define EECONFIG_RGB_MATRIX (uint32_t *)16 +``` Where `16` is an unused index from `eeconfig.h`. @@ -212,12 +238,14 @@ Where `16` is an unused index from `eeconfig.h`. To use the suspend feature, add this to your `.c`: - void suspend_power_down_kb(void) - { - rgb_matrix_set_suspend_state(true); - } +```C +void suspend_power_down_kb(void) +{ + rgb_matrix_set_suspend_state(true); +} - void suspend_wakeup_init_kb(void) - { - rgb_matrix_set_suspend_state(false); - } +void suspend_wakeup_init_kb(void) +{ + rgb_matrix_set_suspend_state(false); +} +``` diff --git a/keyboards/dztech/dz40rgb/config.h b/keyboards/dztech/dz40rgb/config.h index 5b9f6dc0899..0d6c4ae39a7 100644 --- a/keyboards/dztech/dz40rgb/config.h +++ b/keyboards/dztech/dz40rgb/config.h @@ -22,7 +22,6 @@ #define DEBOUNCE 3 #define RGB_DISABLE_AFTER_TIMEOUT 0 // number of ticks to wait until disabling effects #define RGB_DISABLE_WHEN_USB_SUSPENDED false // turn off effects when suspended -#define RGB_MATRIX_SKIP_FRAMES 10 #define RGB_MATRIX_KEYPRESSES #define DISABLE_RGB_MATRIX_SPLASH #define DISABLE_RGB_MATRIX_MULTISPLASH diff --git a/keyboards/dztech/dz60rgb/config.h b/keyboards/dztech/dz60rgb/config.h index 19f32440eaa..3a6f4bcc07e 100644 --- a/keyboards/dztech/dz60rgb/config.h +++ b/keyboards/dztech/dz60rgb/config.h @@ -23,7 +23,6 @@ #define DEBOUNCE 3 #define RGB_DISABLE_AFTER_TIMEOUT 0 // number of ticks to wait until disabling effects #define RGB_DISABLE_WHEN_USB_SUSPENDED false // turn off effects when suspended -#define RGB_MATRIX_SKIP_FRAMES 10 #define RGB_MATRIX_KEYPRESSES #define DISABLE_RGB_MATRIX_SPLASH #define DISABLE_RGB_MATRIX_MULTISPLASH diff --git a/keyboards/ergodox_ez/config.h b/keyboards/ergodox_ez/config.h index 096368f7abc..a75edd41544 100644 --- a/keyboards/ergodox_ez/config.h +++ b/keyboards/ergodox_ez/config.h @@ -109,7 +109,6 @@ along with this program. If not, see . #define DRIVER_1_LED_TOTAL 24 #define DRIVER_2_LED_TOTAL 24 #define DRIVER_LED_TOTAL DRIVER_1_LED_TOTAL + DRIVER_2_LED_TOTAL -#define RGB_MATRIX_SKIP_FRAMES 10 // #define RGBLIGHT_COLOR_LAYER_0 0x00, 0x00, 0xFF /* #define RGBLIGHT_COLOR_LAYER_1 0x00, 0x00, 0xFF */ diff --git a/keyboards/hs60/v1/config.h b/keyboards/hs60/v1/config.h index 7581e54b619..528f08bb994 100644 --- a/keyboards/hs60/v1/config.h +++ b/keyboards/hs60/v1/config.h @@ -120,7 +120,6 @@ along with this program. If not, see . #define RGB_DISABLE_AFTER_TIMEOUT 0 // number of ticks to wait until disabling effects #define RGB_DISABLE_WHEN_USB_SUSPENDED false // turn off effects when suspended -#define RGB_MATRIX_SKIP_FRAMES 0 #define RGB_MATRIX_MAXIMUM_BRIGHTNESS 215 #define DRIVER_ADDR_1 0b1110100 diff --git a/layouts/community/ergodox/drashna_glow/config.h b/layouts/community/ergodox/drashna_glow/config.h index cdca5ba4b52..a10c4bb297c 100644 --- a/layouts/community/ergodox/drashna_glow/config.h +++ b/layouts/community/ergodox/drashna_glow/config.h @@ -13,7 +13,6 @@ // #define RGB_MATRIX_KEYRELEASES // reacts to keyreleases (not recommened) // #define RGB_DISABLE_AFTER_TIMEOUT 0 // number of ticks to wait until disabling effects #define RGB_DISABLE_WHEN_USB_SUSPENDED true// turn off effects when suspended -// #define RGB_MATRIX_SKIP_FRAMES 1 // number of frames to skip when displaying animations (0 is full effect) if not defined defaults to 1 // #define RGB_MATRIX_MAXIMUM_BRIGHTNESS 200 // limits maximum brightness of LEDs to 200 out of 255. If not defined maximum brightness is set to 255 // #define EECONFIG_RGB_MATRIX (uint32_t *)16 #endif diff --git a/layouts/community/ortho_4x12/drashna/config.h b/layouts/community/ortho_4x12/drashna/config.h index f648d112790..1858ee3a4f5 100644 --- a/layouts/community/ortho_4x12/drashna/config.h +++ b/layouts/community/ortho_4x12/drashna/config.h @@ -18,7 +18,6 @@ // #define RGB_MATRIX_KEYRELEASES // reacts to keyreleases (not recommened) // #define RGB_DISABLE_AFTER_TIMEOUT 0 // number of ticks to wait until disabling effects #define RGB_DISABLE_WHEN_USB_SUSPENDED true// turn off effects when suspended -// #define RGB_MATRIX_SKIP_FRAMES 1 // number of frames to skip when displaying animations (0 is full effect) if not defined defaults to 1 // #define RGB_MATRIX_MAXIMUM_BRIGHTNESS 200 // limits maximum brightness of LEDs to 200 out of 255. If not defined maximum brightness is set to 255 #define EECONFIG_RGB_MATRIX (uint32_t *)15 #endif diff --git a/lib/lib8tion/LICENSE b/lib/lib8tion/LICENSE new file mode 100644 index 00000000000..ebe476330b1 --- /dev/null +++ b/lib/lib8tion/LICENSE @@ -0,0 +1,20 @@ +The MIT License (MIT) + +Copyright (c) 2013 FastLED + +Permission is hereby granted, free of charge, to any person obtaining a copy of +this software and associated documentation files (the "Software"), to deal in +the Software without restriction, including without limitation the rights to +use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of +the Software, and to permit persons to whom the Software is furnished to do so, +subject to the following conditions: + +The above copyright notice and this permission notice shall be included in all +copies or substantial portions of the Software. + +THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR +IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS +FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR +COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER +IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN +CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. diff --git a/lib/lib8tion/lib8tion.c b/lib/lib8tion/lib8tion.c new file mode 100644 index 00000000000..84b3e9c61c9 --- /dev/null +++ b/lib/lib8tion/lib8tion.c @@ -0,0 +1,242 @@ +#define FASTLED_INTERNAL +#include + +#define RAND16_SEED 1337 +uint16_t rand16seed = RAND16_SEED; + + +// memset8, memcpy8, memmove8: +// optimized avr replacements for the standard "C" library +// routines memset, memcpy, and memmove. +// +// There are two techniques that make these routines +// faster than the standard avr-libc routines. +// First, the loops are unrolled 2X, meaning that +// the average loop overhead is cut in half. +// And second, the compare-and-branch at the bottom +// of each loop decrements the low byte of the +// counter, and if the carry is clear, it branches +// back up immediately. Only if the low byte math +// causes carry do we bother to decrement the high +// byte and check that result for carry as well. +// Results for a 100-byte buffer are 20-40% faster +// than standard avr-libc, at a cost of a few extra +// bytes of code. + +#if defined(__AVR__) +//__attribute__ ((noinline)) +void * memset8 ( void * ptr, uint8_t val, uint16_t num ) +{ + asm volatile( + " movw r26, %[ptr] \n\t" + " sbrs %A[num], 0 \n\t" + " rjmp Lseteven_%= \n\t" + " rjmp Lsetodd_%= \n\t" + "Lsetloop_%=: \n\t" + " st X+, %[val] \n\t" + "Lsetodd_%=: \n\t" + " st X+, %[val] \n\t" + "Lseteven_%=: \n\t" + " subi %A[num], 2 \n\t" + " brcc Lsetloop_%= \n\t" + " sbci %B[num], 0 \n\t" + " brcc Lsetloop_%= \n\t" + : [num] "+r" (num) + : [ptr] "r" (ptr), + [val] "r" (val) + : "memory" + ); + return ptr; +} + + + +//__attribute__ ((noinline)) +void * memcpy8 ( void * dst, const void* src, uint16_t num ) +{ + asm volatile( + " movw r30, %[src] \n\t" + " movw r26, %[dst] \n\t" + " sbrs %A[num], 0 \n\t" + " rjmp Lcpyeven_%= \n\t" + " rjmp Lcpyodd_%= \n\t" + "Lcpyloop_%=: \n\t" + " ld __tmp_reg__, Z+ \n\t" + " st X+, __tmp_reg__ \n\t" + "Lcpyodd_%=: \n\t" + " ld __tmp_reg__, Z+ \n\t" + " st X+, __tmp_reg__ \n\t" + "Lcpyeven_%=: \n\t" + " subi %A[num], 2 \n\t" + " brcc Lcpyloop_%= \n\t" + " sbci %B[num], 0 \n\t" + " brcc Lcpyloop_%= \n\t" + : [num] "+r" (num) + : [src] "r" (src), + [dst] "r" (dst) + : "memory" + ); + return dst; +} + +//__attribute__ ((noinline)) +void * memmove8 ( void * dst, const void* src, uint16_t num ) +{ + if( src > dst) { + // if src > dst then we can use the forward-stepping memcpy8 + return memcpy8( dst, src, num); + } else { + // if src < dst then we have to step backward: + dst = (char*)dst + num; + src = (char*)src + num; + asm volatile( + " movw r30, %[src] \n\t" + " movw r26, %[dst] \n\t" + " sbrs %A[num], 0 \n\t" + " rjmp Lmoveven_%= \n\t" + " rjmp Lmovodd_%= \n\t" + "Lmovloop_%=: \n\t" + " ld __tmp_reg__, -Z \n\t" + " st -X, __tmp_reg__ \n\t" + "Lmovodd_%=: \n\t" + " ld __tmp_reg__, -Z \n\t" + " st -X, __tmp_reg__ \n\t" + "Lmoveven_%=: \n\t" + " subi %A[num], 2 \n\t" + " brcc Lmovloop_%= \n\t" + " sbci %B[num], 0 \n\t" + " brcc Lmovloop_%= \n\t" + : [num] "+r" (num) + : [src] "r" (src), + [dst] "r" (dst) + : "memory" + ); + return dst; + } +} + +#endif /* AVR */ + + + + +#if 0 +// TEST / VERIFICATION CODE ONLY BELOW THIS POINT +#include +#include "lib8tion.h" + +void test1abs( int8_t i) +{ + Serial.print("abs("); Serial.print(i); Serial.print(") = "); + int8_t j = abs8(i); + Serial.print(j); Serial.println(" "); +} + +void testabs() +{ + delay(5000); + for( int8_t q = -128; q != 127; q++) { + test1abs(q); + } + for(;;){}; +} + + +void testmul8() +{ + delay(5000); + byte r, c; + + Serial.println("mul8:"); + for( r = 0; r <= 20; r += 1) { + Serial.print(r); Serial.print(" : "); + for( c = 0; c <= 20; c += 1) { + byte t; + t = mul8( r, c); + Serial.print(t); Serial.print(' '); + } + Serial.println(' '); + } + Serial.println("done."); + for(;;){}; +} + + +void testscale8() +{ + delay(5000); + byte r, c; + + Serial.println("scale8:"); + for( r = 0; r <= 240; r += 10) { + Serial.print(r); Serial.print(" : "); + for( c = 0; c <= 240; c += 10) { + byte t; + t = scale8( r, c); + Serial.print(t); Serial.print(' '); + } + Serial.println(' '); + } + + Serial.println(' '); + Serial.println("scale8_video:"); + + for( r = 0; r <= 100; r += 4) { + Serial.print(r); Serial.print(" : "); + for( c = 0; c <= 100; c += 4) { + byte t; + t = scale8_video( r, c); + Serial.print(t); Serial.print(' '); + } + Serial.println(' '); + } + + Serial.println("done."); + for(;;){}; +} + + + +void testqadd8() +{ + delay(5000); + byte r, c; + for( r = 0; r <= 240; r += 10) { + Serial.print(r); Serial.print(" : "); + for( c = 0; c <= 240; c += 10) { + byte t; + t = qadd8( r, c); + Serial.print(t); Serial.print(' '); + } + Serial.println(' '); + } + Serial.println("done."); + for(;;){}; +} + +void testnscale8x3() +{ + delay(5000); + byte r, g, b, sc; + for( byte z = 0; z < 10; z++) { + r = random8(); g = random8(); b = random8(); sc = random8(); + + Serial.print("nscale8x3_video( "); + Serial.print(r); Serial.print(", "); + Serial.print(g); Serial.print(", "); + Serial.print(b); Serial.print(", "); + Serial.print(sc); Serial.print(") = [ "); + + nscale8x3_video( r, g, b, sc); + + Serial.print(r); Serial.print(", "); + Serial.print(g); Serial.print(", "); + Serial.print(b); Serial.print("]"); + + Serial.println(' '); + } + Serial.println("done."); + for(;;){}; +} + +#endif diff --git a/lib/lib8tion/lib8tion.h b/lib/lib8tion/lib8tion.h new file mode 100644 index 00000000000..d93c748e6a4 --- /dev/null +++ b/lib/lib8tion/lib8tion.h @@ -0,0 +1,934 @@ +#ifndef __INC_LIB8TION_H +#define __INC_LIB8TION_H + +/* + + Fast, efficient 8-bit math functions specifically + designed for high-performance LED programming. + + Because of the AVR(Arduino) and ARM assembly language + implementations provided, using these functions often + results in smaller and faster code than the equivalent + program using plain "C" arithmetic and logic. + + + Included are: + + + - Saturating unsigned 8-bit add and subtract. + Instead of wrapping around if an overflow occurs, + these routines just 'clamp' the output at a maxumum + of 255, or a minimum of 0. Useful for adding pixel + values. E.g., qadd8( 200, 100) = 255. + + qadd8( i, j) == MIN( (i + j), 0xFF ) + qsub8( i, j) == MAX( (i - j), 0 ) + + - Saturating signed 8-bit ("7-bit") add. + qadd7( i, j) == MIN( (i + j), 0x7F) + + + - Scaling (down) of unsigned 8- and 16- bit values. + Scaledown value is specified in 1/256ths. + scale8( i, sc) == (i * sc) / 256 + scale16by8( i, sc) == (i * sc) / 256 + + Example: scaling a 0-255 value down into a + range from 0-99: + downscaled = scale8( originalnumber, 100); + + A special version of scale8 is provided for scaling + LED brightness values, to make sure that they don't + accidentally scale down to total black at low + dimming levels, since that would look wrong: + scale8_video( i, sc) = ((i * sc) / 256) +? 1 + + Example: reducing an LED brightness by a + dimming factor: + new_bright = scale8_video( orig_bright, dimming); + + + - Fast 8- and 16- bit unsigned random numbers. + Significantly faster than Arduino random(), but + also somewhat less random. You can add entropy. + random8() == random from 0..255 + random8( n) == random from 0..(N-1) + random8( n, m) == random from N..(M-1) + + random16() == random from 0..65535 + random16( n) == random from 0..(N-1) + random16( n, m) == random from N..(M-1) + + random16_set_seed( k) == seed = k + random16_add_entropy( k) == seed += k + + + - Absolute value of a signed 8-bit value. + abs8( i) == abs( i) + + + - 8-bit math operations which return 8-bit values. + These are provided mostly for completeness, + not particularly for performance. + mul8( i, j) == (i * j) & 0xFF + add8( i, j) == (i + j) & 0xFF + sub8( i, j) == (i - j) & 0xFF + + + - Fast 16-bit approximations of sin and cos. + Input angle is a uint16_t from 0-65535. + Output is a signed int16_t from -32767 to 32767. + sin16( x) == sin( (x/32768.0) * pi) * 32767 + cos16( x) == cos( (x/32768.0) * pi) * 32767 + Accurate to more than 99% in all cases. + + - Fast 8-bit approximations of sin and cos. + Input angle is a uint8_t from 0-255. + Output is an UNsigned uint8_t from 0 to 255. + sin8( x) == (sin( (x/128.0) * pi) * 128) + 128 + cos8( x) == (cos( (x/128.0) * pi) * 128) + 128 + Accurate to within about 2%. + + + - Fast 8-bit "easing in/out" function. + ease8InOutCubic(x) == 3(x^i) - 2(x^3) + ease8InOutApprox(x) == + faster, rougher, approximation of cubic easing + ease8InOutQuad(x) == quadratic (vs cubic) easing + + - Cubic, Quadratic, and Triangle wave functions. + Input is a uint8_t representing phase withing the wave, + similar to how sin8 takes an angle 'theta'. + Output is a uint8_t representing the amplitude of + the wave at that point. + cubicwave8( x) + quadwave8( x) + triwave8( x) + + - Square root for 16-bit integers. About three times + faster and five times smaller than Arduino's built-in + generic 32-bit sqrt routine. + sqrt16( uint16_t x ) == sqrt( x) + + - Dimming and brightening functions for 8-bit + light values. + dim8_video( x) == scale8_video( x, x) + dim8_raw( x) == scale8( x, x) + dim8_lin( x) == (x<128) ? ((x+1)/2) : scale8(x,x) + brighten8_video( x) == 255 - dim8_video( 255 - x) + brighten8_raw( x) == 255 - dim8_raw( 255 - x) + brighten8_lin( x) == 255 - dim8_lin( 255 - x) + The dimming functions in particular are suitable + for making LED light output appear more 'linear'. + + + - Linear interpolation between two values, with the + fraction between them expressed as an 8- or 16-bit + fixed point fraction (fract8 or fract16). + lerp8by8( fromU8, toU8, fract8 ) + lerp16by8( fromU16, toU16, fract8 ) + lerp15by8( fromS16, toS16, fract8 ) + == from + (( to - from ) * fract8) / 256) + lerp16by16( fromU16, toU16, fract16 ) + == from + (( to - from ) * fract16) / 65536) + map8( in, rangeStart, rangeEnd) + == map( in, 0, 255, rangeStart, rangeEnd); + + - Optimized memmove, memcpy, and memset, that are + faster than standard avr-libc 1.8. + memmove8( dest, src, bytecount) + memcpy8( dest, src, bytecount) + memset8( buf, value, bytecount) + + - Beat generators which return sine or sawtooth + waves in a specified number of Beats Per Minute. + Sine wave beat generators can specify a low and + high range for the output. Sawtooth wave beat + generators always range 0-255 or 0-65535. + beatsin8( BPM, low8, high8) + = (sine(beatphase) * (high8-low8)) + low8 + beatsin16( BPM, low16, high16) + = (sine(beatphase) * (high16-low16)) + low16 + beatsin88( BPM88, low16, high16) + = (sine(beatphase) * (high16-low16)) + low16 + beat8( BPM) = 8-bit repeating sawtooth wave + beat16( BPM) = 16-bit repeating sawtooth wave + beat88( BPM88) = 16-bit repeating sawtooth wave + BPM is beats per minute in either simple form + e.g. 120, or Q8.8 fixed-point form. + BPM88 is beats per minute in ONLY Q8.8 fixed-point + form. + +Lib8tion is pronounced like 'libation': lie-BAY-shun + +*/ + + + +#include + +#define LIB8STATIC __attribute__ ((unused)) static inline +#define LIB8STATIC_ALWAYS_INLINE __attribute__ ((always_inline)) static inline + +#if !defined(__AVR__) +#include +// for memmove, memcpy, and memset if not defined here +#endif + +#if defined(__arm__) + +#if defined(FASTLED_TEENSY3) +// Can use Cortex M4 DSP instructions +#define QADD8_C 0 +#define QADD7_C 0 +#define QADD8_ARM_DSP_ASM 1 +#define QADD7_ARM_DSP_ASM 1 +#else +// Generic ARM +#define QADD8_C 1 +#define QADD7_C 1 +#endif + +#define QSUB8_C 1 +#define SCALE8_C 1 +#define SCALE16BY8_C 1 +#define SCALE16_C 1 +#define ABS8_C 1 +#define MUL8_C 1 +#define QMUL8_C 1 +#define ADD8_C 1 +#define SUB8_C 1 +#define EASE8_C 1 +#define AVG8_C 1 +#define AVG7_C 1 +#define AVG16_C 1 +#define AVG15_C 1 +#define BLEND8_C 1 + + +#elif defined(__AVR__) + +// AVR ATmega and friends Arduino + +#define QADD8_C 0 +#define QADD7_C 0 +#define QSUB8_C 0 +#define ABS8_C 0 +#define ADD8_C 0 +#define SUB8_C 0 +#define AVG8_C 0 +#define AVG7_C 0 +#define AVG16_C 0 +#define AVG15_C 0 + +#define QADD8_AVRASM 1 +#define QADD7_AVRASM 1 +#define QSUB8_AVRASM 1 +#define ABS8_AVRASM 1 +#define ADD8_AVRASM 1 +#define SUB8_AVRASM 1 +#define AVG8_AVRASM 1 +#define AVG7_AVRASM 1 +#define AVG16_AVRASM 1 +#define AVG15_AVRASM 1 + +// Note: these require hardware MUL instruction +// -- sorry, ATtiny! +#if !defined(LIB8_ATTINY) +#define SCALE8_C 0 +#define SCALE16BY8_C 0 +#define SCALE16_C 0 +#define MUL8_C 0 +#define QMUL8_C 0 +#define EASE8_C 0 +#define BLEND8_C 0 +#define SCALE8_AVRASM 1 +#define SCALE16BY8_AVRASM 1 +#define SCALE16_AVRASM 1 +#define MUL8_AVRASM 1 +#define QMUL8_AVRASM 1 +#define EASE8_AVRASM 1 +#define CLEANUP_R1_AVRASM 1 +#define BLEND8_AVRASM 1 +#else +// On ATtiny, we just use C implementations +#define SCALE8_C 1 +#define SCALE16BY8_C 1 +#define SCALE16_C 1 +#define MUL8_C 1 +#define QMUL8_C 1 +#define EASE8_C 1 +#define BLEND8_C 1 +#define SCALE8_AVRASM 0 +#define SCALE16BY8_AVRASM 0 +#define SCALE16_AVRASM 0 +#define MUL8_AVRASM 0 +#define QMUL8_AVRASM 0 +#define EASE8_AVRASM 0 +#define BLEND8_AVRASM 0 +#endif + +#else + +// unspecified architecture, so +// no ASM, everything in C +#define QADD8_C 1 +#define QADD7_C 1 +#define QSUB8_C 1 +#define SCALE8_C 1 +#define SCALE16BY8_C 1 +#define SCALE16_C 1 +#define ABS8_C 1 +#define MUL8_C 1 +#define QMUL8_C 1 +#define ADD8_C 1 +#define SUB8_C 1 +#define EASE8_C 1 +#define AVG8_C 1 +#define AVG7_C 1 +#define AVG16_C 1 +#define AVG15_C 1 +#define BLEND8_C 1 + +#endif + +///@defgroup lib8tion Fast math functions +///A variety of functions for working with numbers. +///@{ + + +/////////////////////////////////////////////////////////////////////// +// +// typdefs for fixed-point fractional types. +// +// sfract7 should be interpreted as signed 128ths. +// fract8 should be interpreted as unsigned 256ths. +// sfract15 should be interpreted as signed 32768ths. +// fract16 should be interpreted as unsigned 65536ths. +// +// Example: if a fract8 has the value "64", that should be interpreted +// as 64/256ths, or one-quarter. +// +// +// fract8 range is 0 to 0.99609375 +// in steps of 0.00390625 +// +// sfract7 range is -0.9921875 to 0.9921875 +// in steps of 0.0078125 +// +// fract16 range is 0 to 0.99998474121 +// in steps of 0.00001525878 +// +// sfract15 range is -0.99996948242 to 0.99996948242 +// in steps of 0.00003051757 +// + +/// ANSI unsigned short _Fract. range is 0 to 0.99609375 +/// in steps of 0.00390625 +typedef uint8_t fract8; ///< ANSI: unsigned short _Fract + +/// ANSI: signed short _Fract. range is -0.9921875 to 0.9921875 +/// in steps of 0.0078125 +typedef int8_t sfract7; ///< ANSI: signed short _Fract + +/// ANSI: unsigned _Fract. range is 0 to 0.99998474121 +/// in steps of 0.00001525878 +typedef uint16_t fract16; ///< ANSI: unsigned _Fract + +/// ANSI: signed _Fract. range is -0.99996948242 to 0.99996948242 +/// in steps of 0.00003051757 +typedef int16_t sfract15; ///< ANSI: signed _Fract + + +// accumXY types should be interpreted as X bits of integer, +// and Y bits of fraction. +// E.g., accum88 has 8 bits of int, 8 bits of fraction + +typedef uint16_t accum88; ///< ANSI: unsigned short _Accum. 8 bits int, 8 bits fraction +typedef int16_t saccum78; ///< ANSI: signed short _Accum. 7 bits int, 8 bits fraction +typedef uint32_t accum1616;///< ANSI: signed _Accum. 16 bits int, 16 bits fraction +typedef int32_t saccum1516;///< ANSI: signed _Accum. 15 bits int, 16 bits fraction +typedef uint16_t accum124; ///< no direct ANSI counterpart. 12 bits int, 4 bits fraction +typedef int32_t saccum114;///< no direct ANSI counterpart. 1 bit int, 14 bits fraction + + + +#include "math8.h" +#include "scale8.h" +#include "random8.h" +#include "trig8.h" + +/////////////////////////////////////////////////////////////////////// + + + + + + + +/////////////////////////////////////////////////////////////////////// +// +// float-to-fixed and fixed-to-float conversions +// +// Note that anything involving a 'float' on AVR will be slower. + +/// sfract15ToFloat: conversion from sfract15 fixed point to +/// IEEE754 32-bit float. +LIB8STATIC float sfract15ToFloat( sfract15 y) +{ + return y / 32768.0; +} + +/// conversion from IEEE754 float in the range (-1,1) +/// to 16-bit fixed point. Note that the extremes of +/// one and negative one are NOT representable. The +/// representable range is basically +LIB8STATIC sfract15 floatToSfract15( float f) +{ + return f * 32768.0; +} + + + +/////////////////////////////////////////////////////////////////////// +// +// memmove8, memcpy8, and memset8: +// alternatives to memmove, memcpy, and memset that are +// faster on AVR than standard avr-libc 1.8 + +#if defined(__AVR__) +void * memmove8( void * dst, const void * src, uint16_t num ); +void * memcpy8 ( void * dst, const void * src, uint16_t num ) __attribute__ ((noinline)); +void * memset8 ( void * ptr, uint8_t value, uint16_t num ) __attribute__ ((noinline)) ; +#else +// on non-AVR platforms, these names just call standard libc. +#define memmove8 memmove +#define memcpy8 memcpy +#define memset8 memset +#endif + + +/////////////////////////////////////////////////////////////////////// +// +// linear interpolation, such as could be used for Perlin noise, etc. +// + +// A note on the structure of the lerp functions: +// The cases for b>a and b<=a are handled separately for +// speed: without knowing the relative order of a and b, +// the value (a-b) might be overflow the width of a or b, +// and have to be promoted to a wider, slower type. +// To avoid that, we separate the two cases, and are able +// to do all the math in the same width as the arguments, +// which is much faster and smaller on AVR. + +/// linear interpolation between two unsigned 8-bit values, +/// with 8-bit fraction +LIB8STATIC uint8_t lerp8by8( uint8_t a, uint8_t b, fract8 frac) +{ + uint8_t result; + if( b > a) { + uint8_t delta = b - a; + uint8_t scaled = scale8( delta, frac); + result = a + scaled; + } else { + uint8_t delta = a - b; + uint8_t scaled = scale8( delta, frac); + result = a - scaled; + } + return result; +} + +/// linear interpolation between two unsigned 16-bit values, +/// with 16-bit fraction +LIB8STATIC uint16_t lerp16by16( uint16_t a, uint16_t b, fract16 frac) +{ + uint16_t result; + if( b > a ) { + uint16_t delta = b - a; + uint16_t scaled = scale16(delta, frac); + result = a + scaled; + } else { + uint16_t delta = a - b; + uint16_t scaled = scale16( delta, frac); + result = a - scaled; + } + return result; +} + +/// linear interpolation between two unsigned 16-bit values, +/// with 8-bit fraction +LIB8STATIC uint16_t lerp16by8( uint16_t a, uint16_t b, fract8 frac) +{ + uint16_t result; + if( b > a) { + uint16_t delta = b - a; + uint16_t scaled = scale16by8( delta, frac); + result = a + scaled; + } else { + uint16_t delta = a - b; + uint16_t scaled = scale16by8( delta, frac); + result = a - scaled; + } + return result; +} + +/// linear interpolation between two signed 15-bit values, +/// with 8-bit fraction +LIB8STATIC int16_t lerp15by8( int16_t a, int16_t b, fract8 frac) +{ + int16_t result; + if( b > a) { + uint16_t delta = b - a; + uint16_t scaled = scale16by8( delta, frac); + result = a + scaled; + } else { + uint16_t delta = a - b; + uint16_t scaled = scale16by8( delta, frac); + result = a - scaled; + } + return result; +} + +/// linear interpolation between two signed 15-bit values, +/// with 8-bit fraction +LIB8STATIC int16_t lerp15by16( int16_t a, int16_t b, fract16 frac) +{ + int16_t result; + if( b > a) { + uint16_t delta = b - a; + uint16_t scaled = scale16( delta, frac); + result = a + scaled; + } else { + uint16_t delta = a - b; + uint16_t scaled = scale16( delta, frac); + result = a - scaled; + } + return result; +} + +/// map8: map from one full-range 8-bit value into a narrower +/// range of 8-bit values, possibly a range of hues. +/// +/// E.g. map myValue into a hue in the range blue..purple..pink..red +/// hue = map8( myValue, HUE_BLUE, HUE_RED); +/// +/// Combines nicely with the waveform functions (like sin8, etc) +/// to produce continuous hue gradients back and forth: +/// +/// hue = map8( sin8( myValue), HUE_BLUE, HUE_RED); +/// +/// Mathematically simiar to lerp8by8, but arguments are more +/// like Arduino's "map"; this function is similar to +/// +/// map( in, 0, 255, rangeStart, rangeEnd) +/// +/// but faster and specifically designed for 8-bit values. +LIB8STATIC uint8_t map8( uint8_t in, uint8_t rangeStart, uint8_t rangeEnd) +{ + uint8_t rangeWidth = rangeEnd - rangeStart; + uint8_t out = scale8( in, rangeWidth); + out += rangeStart; + return out; +} + + +/////////////////////////////////////////////////////////////////////// +// +// easing functions; see http://easings.net +// + +/// ease8InOutQuad: 8-bit quadratic ease-in / ease-out function +/// Takes around 13 cycles on AVR +#if EASE8_C == 1 +LIB8STATIC uint8_t ease8InOutQuad( uint8_t i) +{ + uint8_t j = i; + if( j & 0x80 ) { + j = 255 - j; + } + uint8_t jj = scale8( j, j); + uint8_t jj2 = jj << 1; + if( i & 0x80 ) { + jj2 = 255 - jj2; + } + return jj2; +} + +#elif EASE8_AVRASM == 1 +// This AVR asm version of ease8InOutQuad preserves one more +// low-bit of precision than the C version, and is also slightly +// smaller and faster. +LIB8STATIC uint8_t ease8InOutQuad(uint8_t val) { + uint8_t j=val; + asm volatile ( + "sbrc %[val], 7 \n" + "com %[j] \n" + "mul %[j], %[j] \n" + "add r0, %[j] \n" + "ldi %[j], 0 \n" + "adc %[j], r1 \n" + "lsl r0 \n" // carry = high bit of low byte of mul product + "rol %[j] \n" // j = (j * 2) + carry // preserve add'l bit of precision + "sbrc %[val], 7 \n" + "com %[j] \n" + "clr __zero_reg__ \n" + : [j] "+&a" (j) + : [val] "a" (val) + : "r0", "r1" + ); + return j; +} + +#else +#error "No implementation for ease8InOutQuad available." +#endif + +/// ease16InOutQuad: 16-bit quadratic ease-in / ease-out function +// C implementation at this point +LIB8STATIC uint16_t ease16InOutQuad( uint16_t i) +{ + uint16_t j = i; + if( j & 0x8000 ) { + j = 65535 - j; + } + uint16_t jj = scale16( j, j); + uint16_t jj2 = jj << 1; + if( i & 0x8000 ) { + jj2 = 65535 - jj2; + } + return jj2; +} + + +/// ease8InOutCubic: 8-bit cubic ease-in / ease-out function +/// Takes around 18 cycles on AVR +LIB8STATIC fract8 ease8InOutCubic( fract8 i) +{ + uint8_t ii = scale8_LEAVING_R1_DIRTY( i, i); + uint8_t iii = scale8_LEAVING_R1_DIRTY( ii, i); + + uint16_t r1 = (3 * (uint16_t)(ii)) - ( 2 * (uint16_t)(iii)); + + /* the code generated for the above *'s automatically + cleans up R1, so there's no need to explicitily call + cleanup_R1(); */ + + uint8_t result = r1; + + // if we got "256", return 255: + if( r1 & 0x100 ) { + result = 255; + } + return result; +} + +/// ease8InOutApprox: fast, rough 8-bit ease-in/ease-out function +/// shaped approximately like 'ease8InOutCubic', +/// it's never off by more than a couple of percent +/// from the actual cubic S-curve, and it executes +/// more than twice as fast. Use when the cycles +/// are more important than visual smoothness. +/// Asm version takes around 7 cycles on AVR. + +#if EASE8_C == 1 +LIB8STATIC fract8 ease8InOutApprox( fract8 i) +{ + if( i < 64) { + // start with slope 0.5 + i /= 2; + } else if( i > (255 - 64)) { + // end with slope 0.5 + i = 255 - i; + i /= 2; + i = 255 - i; + } else { + // in the middle, use slope 192/128 = 1.5 + i -= 64; + i += (i / 2); + i += 32; + } + + return i; +} + +#elif EASE8_AVRASM == 1 +LIB8STATIC uint8_t ease8InOutApprox( fract8 i) +{ + // takes around 7 cycles on AVR + asm volatile ( + " subi %[i], 64 \n\t" + " cpi %[i], 128 \n\t" + " brcc Lshift_%= \n\t" + + // middle case + " mov __tmp_reg__, %[i] \n\t" + " lsr __tmp_reg__ \n\t" + " add %[i], __tmp_reg__ \n\t" + " subi %[i], 224 \n\t" + " rjmp Ldone_%= \n\t" + + // start or end case + "Lshift_%=: \n\t" + " lsr %[i] \n\t" + " subi %[i], 96 \n\t" + + "Ldone_%=: \n\t" + + : [i] "+&a" (i) + : + : "r0", "r1" + ); + return i; +} +#else +#error "No implementation for ease8 available." +#endif + + + +/// triwave8: triangle (sawtooth) wave generator. Useful for +/// turning a one-byte ever-increasing value into a +/// one-byte value that oscillates up and down. +/// +/// input output +/// 0..127 0..254 (positive slope) +/// 128..255 254..0 (negative slope) +/// +/// On AVR this function takes just three cycles. +/// +LIB8STATIC uint8_t triwave8(uint8_t in) +{ + if( in & 0x80) { + in = 255 - in; + } + uint8_t out = in << 1; + return out; +} + + +// quadwave8 and cubicwave8: S-shaped wave generators (like 'sine'). +// Useful for turning a one-byte 'counter' value into a +// one-byte oscillating value that moves smoothly up and down, +// with an 'acceleration' and 'deceleration' curve. +// +// These are even faster than 'sin8', and have +// slightly different curve shapes. +// + +/// quadwave8: quadratic waveform generator. Spends just a little more +/// time at the limits than 'sine' does. +LIB8STATIC uint8_t quadwave8(uint8_t in) +{ + return ease8InOutQuad( triwave8( in)); +} + +/// cubicwave8: cubic waveform generator. Spends visibly more time +/// at the limits than 'sine' does. +LIB8STATIC uint8_t cubicwave8(uint8_t in) +{ + return ease8InOutCubic( triwave8( in)); +} + +/// squarewave8: square wave generator. Useful for +/// turning a one-byte ever-increasing value +/// into a one-byte value that is either 0 or 255. +/// The width of the output 'pulse' is +/// determined by the pulsewidth argument: +/// +///~~~ +/// If pulsewidth is 255, output is always 255. +/// If pulsewidth < 255, then +/// if input < pulsewidth then output is 255 +/// if input >= pulsewidth then output is 0 +///~~~ +/// +/// the output looking like: +/// +///~~~ +/// 255 +--pulsewidth--+ +/// . | | +/// 0 0 +--------(256-pulsewidth)-------- +///~~~ +/// +/// @param in +/// @param pulsewidth +/// @returns square wave output +LIB8STATIC uint8_t squarewave8( uint8_t in, uint8_t pulsewidth) +{ + if( in < pulsewidth || (pulsewidth == 255)) { + return 255; + } else { + return 0; + } +} + + +// Beat generators - These functions produce waves at a given +// number of 'beats per minute'. Internally, they use +// the Arduino function 'millis' to track elapsed time. +// Accuracy is a bit better than one part in a thousand. +// +// beat8( BPM ) returns an 8-bit value that cycles 'BPM' times +// per minute, rising from 0 to 255, resetting to zero, +// rising up again, etc.. The output of this function +// is suitable for feeding directly into sin8, and cos8, +// triwave8, quadwave8, and cubicwave8. +// beat16( BPM ) returns a 16-bit value that cycles 'BPM' times +// per minute, rising from 0 to 65535, resetting to zero, +// rising up again, etc. The output of this function is +// suitable for feeding directly into sin16 and cos16. +// beat88( BPM88) is the same as beat16, except that the BPM88 argument +// MUST be in Q8.8 fixed point format, e.g. 120BPM must +// be specified as 120*256 = 30720. +// beatsin8( BPM, uint8_t low, uint8_t high) returns an 8-bit value that +// rises and falls in a sine wave, 'BPM' times per minute, +// between the values of 'low' and 'high'. +// beatsin16( BPM, uint16_t low, uint16_t high) returns a 16-bit value +// that rises and falls in a sine wave, 'BPM' times per +// minute, between the values of 'low' and 'high'. +// beatsin88( BPM88, ...) is the same as beatsin16, except that the +// BPM88 argument MUST be in Q8.8 fixed point format, +// e.g. 120BPM must be specified as 120*256 = 30720. +// +// BPM can be supplied two ways. The simpler way of specifying BPM is as +// a simple 8-bit integer from 1-255, (e.g., "120"). +// The more sophisticated way of specifying BPM allows for fractional +// "Q8.8" fixed point number (an 'accum88') with an 8-bit integer part and +// an 8-bit fractional part. The easiest way to construct this is to multiply +// a floating point BPM value (e.g. 120.3) by 256, (e.g. resulting in 30796 +// in this case), and pass that as the 16-bit BPM argument. +// "BPM88" MUST always be specified in Q8.8 format. +// +// Originally designed to make an entire animation project pulse with brightness. +// For that effect, add this line just above your existing call to "FastLED.show()": +// +// uint8_t bright = beatsin8( 60 /*BPM*/, 192 /*dimmest*/, 255 /*brightest*/ )); +// FastLED.setBrightness( bright ); +// FastLED.show(); +// +// The entire animation will now pulse between brightness 192 and 255 once per second. + + +// The beat generators need access to a millisecond counter. +// On Arduino, this is "millis()". On other platforms, you'll +// need to provide a function with this signature: +// uint32_t get_millisecond_timer(); +// that provides similar functionality. +// You can also force use of the get_millisecond_timer function +// by #defining USE_GET_MILLISECOND_TIMER. +#if (defined(ARDUINO) || defined(SPARK) || defined(FASTLED_HAS_MILLIS)) && !defined(USE_GET_MILLISECOND_TIMER) +// Forward declaration of Arduino function 'millis'. +//uint32_t millis(); +#define GET_MILLIS millis +#else +uint32_t get_millisecond_timer(void); +#define GET_MILLIS get_millisecond_timer +#endif + +// beat16 generates a 16-bit 'sawtooth' wave at a given BPM, +/// with BPM specified in Q8.8 fixed-point format; e.g. +/// for this function, 120 BPM MUST BE specified as +/// 120*256 = 30720. +/// If you just want to specify "120", use beat16 or beat8. +LIB8STATIC uint16_t beat88( accum88 beats_per_minute_88, uint32_t timebase) +{ + // BPM is 'beats per minute', or 'beats per 60000ms'. + // To avoid using the (slower) division operator, we + // want to convert 'beats per 60000ms' to 'beats per 65536ms', + // and then use a simple, fast bit-shift to divide by 65536. + // + // The ratio 65536:60000 is 279.620266667:256; we'll call it 280:256. + // The conversion is accurate to about 0.05%, more or less, + // e.g. if you ask for "120 BPM", you'll get about "119.93". + return (((GET_MILLIS()) - timebase) * beats_per_minute_88 * 280) >> 16; +} + +/// beat16 generates a 16-bit 'sawtooth' wave at a given BPM +LIB8STATIC uint16_t beat16( accum88 beats_per_minute, uint32_t timebase) +{ + // Convert simple 8-bit BPM's to full Q8.8 accum88's if needed + if( beats_per_minute < 256) beats_per_minute <<= 8; + return beat88(beats_per_minute, timebase); +} + +/// beat8 generates an 8-bit 'sawtooth' wave at a given BPM +LIB8STATIC uint8_t beat8( accum88 beats_per_minute, uint32_t timebase) +{ + return beat16( beats_per_minute, timebase) >> 8; +} + +/// beatsin88 generates a 16-bit sine wave at a given BPM, +/// that oscillates within a given range. +/// For this function, BPM MUST BE SPECIFIED as +/// a Q8.8 fixed-point value; e.g. 120BPM must be +/// specified as 120*256 = 30720. +/// If you just want to specify "120", use beatsin16 or beatsin8. +LIB8STATIC uint16_t beatsin88( accum88 beats_per_minute_88, uint16_t lowest, uint16_t highest, uint32_t timebase, uint16_t phase_offset) +{ + uint16_t beat = beat88( beats_per_minute_88, timebase); + uint16_t beatsin = (sin16( beat + phase_offset) + 32768); + uint16_t rangewidth = highest - lowest; + uint16_t scaledbeat = scale16( beatsin, rangewidth); + uint16_t result = lowest + scaledbeat; + return result; +} + +/// beatsin16 generates a 16-bit sine wave at a given BPM, +/// that oscillates within a given range. +LIB8STATIC uint16_t beatsin16(accum88 beats_per_minute, uint16_t lowest, uint16_t highest, uint32_t timebase, uint16_t phase_offset) +{ + uint16_t beat = beat16( beats_per_minute, timebase); + uint16_t beatsin = (sin16( beat + phase_offset) + 32768); + uint16_t rangewidth = highest - lowest; + uint16_t scaledbeat = scale16( beatsin, rangewidth); + uint16_t result = lowest + scaledbeat; + return result; +} + +/// beatsin8 generates an 8-bit sine wave at a given BPM, +/// that oscillates within a given range. +LIB8STATIC uint8_t beatsin8( accum88 beats_per_minute, uint8_t lowest, uint8_t highest, uint32_t timebase, uint8_t phase_offset) +{ + uint8_t beat = beat8( beats_per_minute, timebase); + uint8_t beatsin = sin8( beat + phase_offset); + uint8_t rangewidth = highest - lowest; + uint8_t scaledbeat = scale8( beatsin, rangewidth); + uint8_t result = lowest + scaledbeat; + return result; +} + + +/// Return the current seconds since boot in a 16-bit value. Used as part of the +/// "every N time-periods" mechanism +LIB8STATIC uint16_t seconds16(void) +{ + uint32_t ms = GET_MILLIS(); + uint16_t s16; + s16 = ms / 1000; + return s16; +} + +/// Return the current minutes since boot in a 16-bit value. Used as part of the +/// "every N time-periods" mechanism +LIB8STATIC uint16_t minutes16(void) +{ + uint32_t ms = GET_MILLIS(); + uint16_t m16; + m16 = (ms / (60000L)) & 0xFFFF; + return m16; +} + +/// Return the current hours since boot in an 8-bit value. Used as part of the +/// "every N time-periods" mechanism +LIB8STATIC uint8_t hours8(void) +{ + uint32_t ms = GET_MILLIS(); + uint8_t h8; + h8 = (ms / (3600000L)) & 0xFF; + return h8; +} + +///@} + +#endif diff --git a/lib/lib8tion/math8.h b/lib/lib8tion/math8.h new file mode 100644 index 00000000000..8c6b6c227e3 --- /dev/null +++ b/lib/lib8tion/math8.h @@ -0,0 +1,552 @@ +#ifndef __INC_LIB8TION_MATH_H +#define __INC_LIB8TION_MATH_H + +#include "scale8.h" + +///@ingroup lib8tion + +///@defgroup Math Basic math operations +/// Fast, efficient 8-bit math functions specifically +/// designed for high-performance LED programming. +/// +/// Because of the AVR(Arduino) and ARM assembly language +/// implementations provided, using these functions often +/// results in smaller and faster code than the equivalent +/// program using plain "C" arithmetic and logic. +///@{ + + +/// add one byte to another, saturating at 0xFF +/// @param i - first byte to add +/// @param j - second byte to add +/// @returns the sum of i & j, capped at 0xFF +LIB8STATIC_ALWAYS_INLINE uint8_t qadd8( uint8_t i, uint8_t j) +{ +#if QADD8_C == 1 + uint16_t t = i + j; + if (t > 255) t = 255; + return t; +#elif QADD8_AVRASM == 1 + asm volatile( + /* First, add j to i, conditioning the C flag */ + "add %0, %1 \n\t" + + /* Now test the C flag. + If C is clear, we branch around a load of 0xFF into i. + If C is set, we go ahead and load 0xFF into i. + */ + "brcc L_%= \n\t" + "ldi %0, 0xFF \n\t" + "L_%=: " + : "+a" (i) + : "a" (j) ); + return i; +#elif QADD8_ARM_DSP_ASM == 1 + asm volatile( "uqadd8 %0, %0, %1" : "+r" (i) : "r" (j)); + return i; +#else +#error "No implementation for qadd8 available." +#endif +} + +/// Add one byte to another, saturating at 0x7F +/// @param i - first byte to add +/// @param j - second byte to add +/// @returns the sum of i & j, capped at 0xFF +LIB8STATIC_ALWAYS_INLINE int8_t qadd7( int8_t i, int8_t j) +{ +#if QADD7_C == 1 + int16_t t = i + j; + if (t > 127) t = 127; + return t; +#elif QADD7_AVRASM == 1 + asm volatile( + /* First, add j to i, conditioning the V flag */ + "add %0, %1 \n\t" + + /* Now test the V flag. + If V is clear, we branch around a load of 0x7F into i. + If V is set, we go ahead and load 0x7F into i. + */ + "brvc L_%= \n\t" + "ldi %0, 0x7F \n\t" + "L_%=: " + : "+a" (i) + : "a" (j) ); + + return i; +#elif QADD7_ARM_DSP_ASM == 1 + asm volatile( "qadd8 %0, %0, %1" : "+r" (i) : "r" (j)); + return i; +#else +#error "No implementation for qadd7 available." +#endif +} + +/// subtract one byte from another, saturating at 0x00 +/// @returns i - j with a floor of 0 +LIB8STATIC_ALWAYS_INLINE uint8_t qsub8( uint8_t i, uint8_t j) +{ +#if QSUB8_C == 1 + int16_t t = i - j; + if (t < 0) t = 0; + return t; +#elif QSUB8_AVRASM == 1 + + asm volatile( + /* First, subtract j from i, conditioning the C flag */ + "sub %0, %1 \n\t" + + /* Now test the C flag. + If C is clear, we branch around a load of 0x00 into i. + If C is set, we go ahead and load 0x00 into i. + */ + "brcc L_%= \n\t" + "ldi %0, 0x00 \n\t" + "L_%=: " + : "+a" (i) + : "a" (j) ); + + return i; +#else +#error "No implementation for qsub8 available." +#endif +} + +/// add one byte to another, with one byte result +LIB8STATIC_ALWAYS_INLINE uint8_t add8( uint8_t i, uint8_t j) +{ +#if ADD8_C == 1 + uint16_t t = i + j; + return t; +#elif ADD8_AVRASM == 1 + // Add j to i, period. + asm volatile( "add %0, %1" : "+a" (i) : "a" (j)); + return i; +#else +#error "No implementation for add8 available." +#endif +} + +/// add one byte to another, with one byte result +LIB8STATIC_ALWAYS_INLINE uint16_t add8to16( uint8_t i, uint16_t j) +{ +#if ADD8_C == 1 + uint16_t t = i + j; + return t; +#elif ADD8_AVRASM == 1 + // Add i(one byte) to j(two bytes) + asm volatile( "add %A[j], %[i] \n\t" + "adc %B[j], __zero_reg__ \n\t" + : [j] "+a" (j) + : [i] "a" (i) + ); + return i; +#else +#error "No implementation for add8to16 available." +#endif +} + + +/// subtract one byte from another, 8-bit result +LIB8STATIC_ALWAYS_INLINE uint8_t sub8( uint8_t i, uint8_t j) +{ +#if SUB8_C == 1 + int16_t t = i - j; + return t; +#elif SUB8_AVRASM == 1 + // Subtract j from i, period. + asm volatile( "sub %0, %1" : "+a" (i) : "a" (j)); + return i; +#else +#error "No implementation for sub8 available." +#endif +} + +/// Calculate an integer average of two unsigned +/// 8-bit integer values (uint8_t). +/// Fractional results are rounded down, e.g. avg8(20,41) = 30 +LIB8STATIC_ALWAYS_INLINE uint8_t avg8( uint8_t i, uint8_t j) +{ +#if AVG8_C == 1 + return (i + j) >> 1; +#elif AVG8_AVRASM == 1 + asm volatile( + /* First, add j to i, 9th bit overflows into C flag */ + "add %0, %1 \n\t" + /* Divide by two, moving C flag into high 8th bit */ + "ror %0 \n\t" + : "+a" (i) + : "a" (j) ); + return i; +#else +#error "No implementation for avg8 available." +#endif +} + +/// Calculate an integer average of two unsigned +/// 16-bit integer values (uint16_t). +/// Fractional results are rounded down, e.g. avg16(20,41) = 30 +LIB8STATIC_ALWAYS_INLINE uint16_t avg16( uint16_t i, uint16_t j) +{ +#if AVG16_C == 1 + return (uint32_t)((uint32_t)(i) + (uint32_t)(j)) >> 1; +#elif AVG16_AVRASM == 1 + asm volatile( + /* First, add jLo (heh) to iLo, 9th bit overflows into C flag */ + "add %A[i], %A[j] \n\t" + /* Now, add C + jHi to iHi, 17th bit overflows into C flag */ + "adc %B[i], %B[j] \n\t" + /* Divide iHi by two, moving C flag into high 16th bit, old 9th bit now in C */ + "ror %B[i] \n\t" + /* Divide iLo by two, moving C flag into high 8th bit */ + "ror %A[i] \n\t" + : [i] "+a" (i) + : [j] "a" (j) ); + return i; +#else +#error "No implementation for avg16 available." +#endif +} + + +/// Calculate an integer average of two signed 7-bit +/// integers (int8_t) +/// If the first argument is even, result is rounded down. +/// If the first argument is odd, result is result up. +LIB8STATIC_ALWAYS_INLINE int8_t avg7( int8_t i, int8_t j) +{ +#if AVG7_C == 1 + return ((i + j) >> 1) + (i & 0x1); +#elif AVG7_AVRASM == 1 + asm volatile( + "asr %1 \n\t" + "asr %0 \n\t" + "adc %0, %1 \n\t" + : "+a" (i) + : "a" (j) ); + return i; +#else +#error "No implementation for avg7 available." +#endif +} + +/// Calculate an integer average of two signed 15-bit +/// integers (int16_t) +/// If the first argument is even, result is rounded down. +/// If the first argument is odd, result is result up. +LIB8STATIC_ALWAYS_INLINE int16_t avg15( int16_t i, int16_t j) +{ +#if AVG15_C == 1 + return ((int32_t)((int32_t)(i) + (int32_t)(j)) >> 1) + (i & 0x1); +#elif AVG15_AVRASM == 1 + asm volatile( + /* first divide j by 2, throwing away lowest bit */ + "asr %B[j] \n\t" + "ror %A[j] \n\t" + /* now divide i by 2, with lowest bit going into C */ + "asr %B[i] \n\t" + "ror %A[i] \n\t" + /* add j + C to i */ + "adc %A[i], %A[j] \n\t" + "adc %B[i], %B[j] \n\t" + : [i] "+a" (i) + : [j] "a" (j) ); + return i; +#else +#error "No implementation for avg15 available." +#endif +} + + +/// Calculate the remainder of one unsigned 8-bit +/// value divided by anoter, aka A % M. +/// Implemented by repeated subtraction, which is +/// very compact, and very fast if A is 'probably' +/// less than M. If A is a large multiple of M, +/// the loop has to execute multiple times. However, +/// even in that case, the loop is only two +/// instructions long on AVR, i.e., quick. +LIB8STATIC_ALWAYS_INLINE uint8_t mod8( uint8_t a, uint8_t m) +{ +#if defined(__AVR__) + asm volatile ( + "L_%=: sub %[a],%[m] \n\t" + " brcc L_%= \n\t" + " add %[a],%[m] \n\t" + : [a] "+r" (a) + : [m] "r" (m) + ); +#else + while( a >= m) a -= m; +#endif + return a; +} + +/// Add two numbers, and calculate the modulo +/// of the sum and a third number, M. +/// In other words, it returns (A+B) % M. +/// It is designed as a compact mechanism for +/// incrementing a 'mode' switch and wrapping +/// around back to 'mode 0' when the switch +/// goes past the end of the available range. +/// e.g. if you have seven modes, this switches +/// to the next one and wraps around if needed: +/// mode = addmod8( mode, 1, 7); +///LIB8STATIC_ALWAYS_INLINESee 'mod8' for notes on performance. +LIB8STATIC uint8_t addmod8( uint8_t a, uint8_t b, uint8_t m) +{ +#if defined(__AVR__) + asm volatile ( + " add %[a],%[b] \n\t" + "L_%=: sub %[a],%[m] \n\t" + " brcc L_%= \n\t" + " add %[a],%[m] \n\t" + : [a] "+r" (a) + : [b] "r" (b), [m] "r" (m) + ); +#else + a += b; + while( a >= m) a -= m; +#endif + return a; +} + +/// Subtract two numbers, and calculate the modulo +/// of the difference and a third number, M. +/// In other words, it returns (A-B) % M. +/// It is designed as a compact mechanism for +/// incrementing a 'mode' switch and wrapping +/// around back to 'mode 0' when the switch +/// goes past the end of the available range. +/// e.g. if you have seven modes, this switches +/// to the next one and wraps around if needed: +/// mode = addmod8( mode, 1, 7); +///LIB8STATIC_ALWAYS_INLINESee 'mod8' for notes on performance. +LIB8STATIC uint8_t submod8( uint8_t a, uint8_t b, uint8_t m) +{ +#if defined(__AVR__) + asm volatile ( + " sub %[a],%[b] \n\t" + "L_%=: sub %[a],%[m] \n\t" + " brcc L_%= \n\t" + " add %[a],%[m] \n\t" + : [a] "+r" (a) + : [b] "r" (b), [m] "r" (m) + ); +#else + a -= b; + while( a >= m) a -= m; +#endif + return a; +} + +/// 8x8 bit multiplication, with 8 bit result +LIB8STATIC_ALWAYS_INLINE uint8_t mul8( uint8_t i, uint8_t j) +{ +#if MUL8_C == 1 + return ((uint16_t)i * (uint16_t)(j) ) & 0xFF; +#elif MUL8_AVRASM == 1 + asm volatile( + /* Multiply 8-bit i * 8-bit j, giving 16-bit r1,r0 */ + "mul %0, %1 \n\t" + /* Extract the LOW 8-bits (r0) */ + "mov %0, r0 \n\t" + /* Restore r1 to "0"; it's expected to always be that */ + "clr __zero_reg__ \n\t" + : "+a" (i) + : "a" (j) + : "r0", "r1"); + + return i; +#else +#error "No implementation for mul8 available." +#endif +} + + +/// saturating 8x8 bit multiplication, with 8 bit result +/// @returns the product of i * j, capping at 0xFF +LIB8STATIC_ALWAYS_INLINE uint8_t qmul8( uint8_t i, uint8_t j) +{ +#if QMUL8_C == 1 + int p = ((uint16_t)i * (uint16_t)(j) ); + if( p > 255) p = 255; + return p; +#elif QMUL8_AVRASM == 1 + asm volatile( + /* Multiply 8-bit i * 8-bit j, giving 16-bit r1,r0 */ + " mul %0, %1 \n\t" + /* If high byte of result is zero, all is well. */ + " tst r1 \n\t" + " breq Lnospill_%= \n\t" + /* If high byte of result > 0, saturate low byte to 0xFF */ + " ldi %0,0xFF \n\t" + " rjmp Ldone_%= \n\t" + "Lnospill_%=: \n\t" + /* Extract the LOW 8-bits (r0) */ + " mov %0, r0 \n\t" + "Ldone_%=: \n\t" + /* Restore r1 to "0"; it's expected to always be that */ + " clr __zero_reg__ \n\t" + : "+a" (i) + : "a" (j) + : "r0", "r1"); + + return i; +#else +#error "No implementation for qmul8 available." +#endif +} + + +/// take abs() of a signed 8-bit uint8_t +LIB8STATIC_ALWAYS_INLINE int8_t abs8( int8_t i) +{ +#if ABS8_C == 1 + if( i < 0) i = -i; + return i; +#elif ABS8_AVRASM == 1 + + + asm volatile( + /* First, check the high bit, and prepare to skip if it's clear */ + "sbrc %0, 7 \n" + + /* Negate the value */ + "neg %0 \n" + + : "+r" (i) : "r" (i) ); + return i; +#else +#error "No implementation for abs8 available." +#endif +} + +/// square root for 16-bit integers +/// About three times faster and five times smaller +/// than Arduino's general sqrt on AVR. +LIB8STATIC uint8_t sqrt16(uint16_t x) +{ + if( x <= 1) { + return x; + } + + uint8_t low = 1; // lower bound + uint8_t hi, mid; + + if( x > 7904) { + hi = 255; + } else { + hi = (x >> 5) + 8; // initial estimate for upper bound + } + + do { + mid = (low + hi) >> 1; + if ((uint16_t)(mid * mid) > x) { + hi = mid - 1; + } else { + if( mid == 255) { + return 255; + } + low = mid + 1; + } + } while (hi >= low); + + return low - 1; +} + +/// blend a variable proproportion(0-255) of one byte to another +/// @param a - the starting byte value +/// @param b - the byte value to blend toward +/// @param amountOfB - the proportion (0-255) of b to blend +/// @returns a byte value between a and b, inclusive +#if (FASTLED_BLEND_FIXED == 1) +LIB8STATIC uint8_t blend8( uint8_t a, uint8_t b, uint8_t amountOfB) +{ +#if BLEND8_C == 1 + uint16_t partial; + uint8_t result; + + uint8_t amountOfA = 255 - amountOfB; + + partial = (a * amountOfA); +#if (FASTLED_SCALE8_FIXED == 1) + partial += a; + //partial = add8to16( a, partial); +#endif + + partial += (b * amountOfB); +#if (FASTLED_SCALE8_FIXED == 1) + partial += b; + //partial = add8to16( b, partial); +#endif + + result = partial >> 8; + + return result; + +#elif BLEND8_AVRASM == 1 + uint16_t partial; + uint8_t result; + + asm volatile ( + /* partial = b * amountOfB */ + " mul %[b], %[amountOfB] \n\t" + " movw %A[partial], r0 \n\t" + + /* amountOfB (aka amountOfA) = 255 - amountOfB */ + " com %[amountOfB] \n\t" + + /* partial += a * amountOfB (aka amountOfA) */ + " mul %[a], %[amountOfB] \n\t" + + " add %A[partial], r0 \n\t" + " adc %B[partial], r1 \n\t" + + " clr __zero_reg__ \n\t" + +#if (FASTLED_SCALE8_FIXED == 1) + /* partial += a */ + " add %A[partial], %[a] \n\t" + " adc %B[partial], __zero_reg__ \n\t" + + // partial += b + " add %A[partial], %[b] \n\t" + " adc %B[partial], __zero_reg__ \n\t" +#endif + + : [partial] "=r" (partial), + [amountOfB] "+a" (amountOfB) + : [a] "a" (a), + [b] "a" (b) + : "r0", "r1" + ); + + result = partial >> 8; + + return result; + +#else +#error "No implementation for blend8 available." +#endif +} + +#else +LIB8STATIC uint8_t blend8( uint8_t a, uint8_t b, uint8_t amountOfB) +{ + // This version loses precision in the integer math + // and can actually return results outside of the range + // from a to b. Its use is not recommended. + uint8_t result; + uint8_t amountOfA = 255 - amountOfB; + result = scale8_LEAVING_R1_DIRTY( a, amountOfA) + + scale8_LEAVING_R1_DIRTY( b, amountOfB); + cleanup_R1(); + return result; +} +#endif + + +///@} +#endif diff --git a/lib/lib8tion/random8.h b/lib/lib8tion/random8.h new file mode 100644 index 00000000000..7ee67cbb364 --- /dev/null +++ b/lib/lib8tion/random8.h @@ -0,0 +1,94 @@ +#ifndef __INC_LIB8TION_RANDOM_H +#define __INC_LIB8TION_RANDOM_H +///@ingroup lib8tion + +///@defgroup Random Fast random number generators +/// Fast 8- and 16- bit unsigned random numbers. +/// Significantly faster than Arduino random(), but +/// also somewhat less random. You can add entropy. +///@{ + +// X(n+1) = (2053 * X(n)) + 13849) +#define FASTLED_RAND16_2053 ((uint16_t)(2053)) +#define FASTLED_RAND16_13849 ((uint16_t)(13849)) + +/// random number seed +extern uint16_t rand16seed;// = RAND16_SEED; + +/// Generate an 8-bit random number +LIB8STATIC uint8_t random8(void) +{ + rand16seed = (rand16seed * FASTLED_RAND16_2053) + FASTLED_RAND16_13849; + // return the sum of the high and low bytes, for better + // mixing and non-sequential correlation + return (uint8_t)(((uint8_t)(rand16seed & 0xFF)) + + ((uint8_t)(rand16seed >> 8))); +} + +/// Generate a 16 bit random number +LIB8STATIC uint16_t random16(void) +{ + rand16seed = (rand16seed * FASTLED_RAND16_2053) + FASTLED_RAND16_13849; + return rand16seed; +} + +/// Generate an 8-bit random number between 0 and lim +/// @param lim the upper bound for the result +LIB8STATIC uint8_t random8_max(uint8_t lim) +{ + uint8_t r = random8(); + r = (r*lim) >> 8; + return r; +} + +/// Generate an 8-bit random number in the given range +/// @param min the lower bound for the random number +/// @param lim the upper bound for the random number +LIB8STATIC uint8_t random8_min_max(uint8_t min, uint8_t lim) +{ + uint8_t delta = lim - min; + uint8_t r = random8_max(delta) + min; + return r; +} + +/// Generate an 16-bit random number between 0 and lim +/// @param lim the upper bound for the result +LIB8STATIC uint16_t random16_max(uint16_t lim) +{ + uint16_t r = random16(); + uint32_t p = (uint32_t)lim * (uint32_t)r; + r = p >> 16; + return r; +} + +/// Generate an 16-bit random number in the given range +/// @param min the lower bound for the random number +/// @param lim the upper bound for the random number +LIB8STATIC uint16_t random16_min_max( uint16_t min, uint16_t lim) +{ + uint16_t delta = lim - min; + uint16_t r = random16_max(delta) + min; + return r; +} + +/// Set the 16-bit seed used for the random number generator +LIB8STATIC void random16_set_seed(uint16_t seed) +{ + rand16seed = seed; +} + +/// Get the current seed value for the random number generator +LIB8STATIC uint16_t random16_get_seed(void) +{ + return rand16seed; +} + +/// Add entropy into the random number generator +LIB8STATIC void random16_add_entropy(uint16_t entropy) +{ + rand16seed += entropy; +} + +///@} + +#endif diff --git a/lib/lib8tion/scale8.h b/lib/lib8tion/scale8.h new file mode 100644 index 00000000000..9895fd4d791 --- /dev/null +++ b/lib/lib8tion/scale8.h @@ -0,0 +1,542 @@ +#ifndef __INC_LIB8TION_SCALE_H +#define __INC_LIB8TION_SCALE_H + +///@ingroup lib8tion + +///@defgroup Scaling Scaling functions +/// Fast, efficient 8-bit scaling functions specifically +/// designed for high-performance LED programming. +/// +/// Because of the AVR(Arduino) and ARM assembly language +/// implementations provided, using these functions often +/// results in smaller and faster code than the equivalent +/// program using plain "C" arithmetic and logic. +///@{ + +/// scale one byte by a second one, which is treated as +/// the numerator of a fraction whose denominator is 256 +/// In other words, it computes i * (scale / 256) +/// 4 clocks AVR with MUL, 2 clocks ARM +LIB8STATIC_ALWAYS_INLINE uint8_t scale8( uint8_t i, fract8 scale) +{ +#if SCALE8_C == 1 +#if (FASTLED_SCALE8_FIXED == 1) + return (((uint16_t)i) * (1+(uint16_t)(scale))) >> 8; +#else + return ((uint16_t)i * (uint16_t)(scale) ) >> 8; +#endif +#elif SCALE8_AVRASM == 1 +#if defined(LIB8_ATTINY) +#if (FASTLED_SCALE8_FIXED == 1) + uint8_t work=i; +#else + uint8_t work=0; +#endif + uint8_t cnt=0x80; + asm volatile( +#if (FASTLED_SCALE8_FIXED == 1) + " inc %[scale] \n\t" + " breq DONE_%= \n\t" + " clr %[work] \n\t" +#endif + "LOOP_%=: \n\t" + /*" sbrc %[scale], 0 \n\t" + " add %[work], %[i] \n\t" + " ror %[work] \n\t" + " lsr %[scale] \n\t" + " clc \n\t"*/ + " sbrc %[scale], 0 \n\t" + " add %[work], %[i] \n\t" + " ror %[work] \n\t" + " lsr %[scale] \n\t" + " lsr %[cnt] \n\t" + "brcc LOOP_%= \n\t" + "DONE_%=: \n\t" + : [work] "+r" (work), [cnt] "+r" (cnt) + : [scale] "r" (scale), [i] "r" (i) + : + ); + return work; +#else + asm volatile( +#if (FASTLED_SCALE8_FIXED==1) + // Multiply 8-bit i * 8-bit scale, giving 16-bit r1,r0 + "mul %0, %1 \n\t" + // Add i to r0, possibly setting the carry flag + "add r0, %0 \n\t" + // load the immediate 0 into i (note, this does _not_ touch any flags) + "ldi %0, 0x00 \n\t" + // walk and chew gum at the same time + "adc %0, r1 \n\t" +#else + /* Multiply 8-bit i * 8-bit scale, giving 16-bit r1,r0 */ + "mul %0, %1 \n\t" + /* Move the high 8-bits of the product (r1) back to i */ + "mov %0, r1 \n\t" + /* Restore r1 to "0"; it's expected to always be that */ +#endif + "clr __zero_reg__ \n\t" + + : "+a" (i) /* writes to i */ + : "a" (scale) /* uses scale */ + : "r0", "r1" /* clobbers r0, r1 */ ); + + /* Return the result */ + return i; +#endif +#else +#error "No implementation for scale8 available." +#endif +} + + +/// The "video" version of scale8 guarantees that the output will +/// be only be zero if one or both of the inputs are zero. If both +/// inputs are non-zero, the output is guaranteed to be non-zero. +/// This makes for better 'video'/LED dimming, at the cost of +/// several additional cycles. +LIB8STATIC_ALWAYS_INLINE uint8_t scale8_video( uint8_t i, fract8 scale) +{ +#if SCALE8_C == 1 || defined(LIB8_ATTINY) + uint8_t j = (((int)i * (int)scale) >> 8) + ((i&&scale)?1:0); + // uint8_t nonzeroscale = (scale != 0) ? 1 : 0; + // uint8_t j = (i == 0) ? 0 : (((int)i * (int)(scale) ) >> 8) + nonzeroscale; + return j; +#elif SCALE8_AVRASM == 1 + uint8_t j=0; + asm volatile( + " tst %[i]\n\t" + " breq L_%=\n\t" + " mul %[i], %[scale]\n\t" + " mov %[j], r1\n\t" + " clr __zero_reg__\n\t" + " cpse %[scale], r1\n\t" + " subi %[j], 0xFF\n\t" + "L_%=: \n\t" + : [j] "+a" (j) + : [i] "a" (i), [scale] "a" (scale) + : "r0", "r1"); + + return j; + // uint8_t nonzeroscale = (scale != 0) ? 1 : 0; + // asm volatile( + // " tst %0 \n" + // " breq L_%= \n" + // " mul %0, %1 \n" + // " mov %0, r1 \n" + // " add %0, %2 \n" + // " clr __zero_reg__ \n" + // "L_%=: \n" + + // : "+a" (i) + // : "a" (scale), "a" (nonzeroscale) + // : "r0", "r1"); + + // // Return the result + // return i; +#else +#error "No implementation for scale8_video available." +#endif +} + + +/// This version of scale8 does not clean up the R1 register on AVR +/// If you are doing several 'scale8's in a row, use this, and +/// then explicitly call cleanup_R1. +LIB8STATIC_ALWAYS_INLINE uint8_t scale8_LEAVING_R1_DIRTY( uint8_t i, fract8 scale) +{ +#if SCALE8_C == 1 +#if (FASTLED_SCALE8_FIXED == 1) + return (((uint16_t)i) * ((uint16_t)(scale)+1)) >> 8; +#else + return ((int)i * (int)(scale) ) >> 8; +#endif +#elif SCALE8_AVRASM == 1 + asm volatile( + #if (FASTLED_SCALE8_FIXED==1) + // Multiply 8-bit i * 8-bit scale, giving 16-bit r1,r0 + "mul %0, %1 \n\t" + // Add i to r0, possibly setting the carry flag + "add r0, %0 \n\t" + // load the immediate 0 into i (note, this does _not_ touch any flags) + "ldi %0, 0x00 \n\t" + // walk and chew gum at the same time + "adc %0, r1 \n\t" + #else + /* Multiply 8-bit i * 8-bit scale, giving 16-bit r1,r0 */ + "mul %0, %1 \n\t" + /* Move the high 8-bits of the product (r1) back to i */ + "mov %0, r1 \n\t" + #endif + /* R1 IS LEFT DIRTY HERE; YOU MUST ZERO IT OUT YOURSELF */ + /* "clr __zero_reg__ \n\t" */ + + : "+a" (i) /* writes to i */ + : "a" (scale) /* uses scale */ + : "r0", "r1" /* clobbers r0, r1 */ ); + + // Return the result + return i; +#else +#error "No implementation for scale8_LEAVING_R1_DIRTY available." +#endif +} + + +/// This version of scale8_video does not clean up the R1 register on AVR +/// If you are doing several 'scale8_video's in a row, use this, and +/// then explicitly call cleanup_R1. +LIB8STATIC_ALWAYS_INLINE uint8_t scale8_video_LEAVING_R1_DIRTY( uint8_t i, fract8 scale) +{ +#if SCALE8_C == 1 || defined(LIB8_ATTINY) + uint8_t j = (((int)i * (int)scale) >> 8) + ((i&&scale)?1:0); + // uint8_t nonzeroscale = (scale != 0) ? 1 : 0; + // uint8_t j = (i == 0) ? 0 : (((int)i * (int)(scale) ) >> 8) + nonzeroscale; + return j; +#elif SCALE8_AVRASM == 1 + uint8_t j=0; + asm volatile( + " tst %[i]\n\t" + " breq L_%=\n\t" + " mul %[i], %[scale]\n\t" + " mov %[j], r1\n\t" + " breq L_%=\n\t" + " subi %[j], 0xFF\n\t" + "L_%=: \n\t" + : [j] "+a" (j) + : [i] "a" (i), [scale] "a" (scale) + : "r0", "r1"); + + return j; + // uint8_t nonzeroscale = (scale != 0) ? 1 : 0; + // asm volatile( + // " tst %0 \n" + // " breq L_%= \n" + // " mul %0, %1 \n" + // " mov %0, r1 \n" + // " add %0, %2 \n" + // " clr __zero_reg__ \n" + // "L_%=: \n" + + // : "+a" (i) + // : "a" (scale), "a" (nonzeroscale) + // : "r0", "r1"); + + // // Return the result + // return i; +#else +#error "No implementation for scale8_video_LEAVING_R1_DIRTY available." +#endif +} + +/// Clean up the r1 register after a series of *LEAVING_R1_DIRTY calls +LIB8STATIC_ALWAYS_INLINE void cleanup_R1(void) +{ +#if CLEANUP_R1_AVRASM == 1 + // Restore r1 to "0"; it's expected to always be that + asm volatile( "clr __zero_reg__ \n\t" : : : "r1" ); +#endif +} + + +/// scale a 16-bit unsigned value by an 8-bit value, +/// considered as numerator of a fraction whose denominator +/// is 256. In other words, it computes i * (scale / 256) + +LIB8STATIC_ALWAYS_INLINE uint16_t scale16by8( uint16_t i, fract8 scale ) +{ +#if SCALE16BY8_C == 1 + uint16_t result; +#if FASTLED_SCALE8_FIXED == 1 + result = (i * (1+((uint16_t)scale))) >> 8; +#else + result = (i * scale) / 256; +#endif + return result; +#elif SCALE16BY8_AVRASM == 1 +#if FASTLED_SCALE8_FIXED == 1 + uint16_t result = 0; + asm volatile( + // result.A = HighByte( (i.A x scale) + i.A ) + " mul %A[i], %[scale] \n\t" + " add r0, %A[i] \n\t" + // " adc r1, [zero] \n\t" + // " mov %A[result], r1 \n\t" + " adc %A[result], r1 \n\t" + + // result.A-B += i.B x scale + " mul %B[i], %[scale] \n\t" + " add %A[result], r0 \n\t" + " adc %B[result], r1 \n\t" + + // cleanup r1 + " clr __zero_reg__ \n\t" + + // result.A-B += i.B + " add %A[result], %B[i] \n\t" + " adc %B[result], __zero_reg__ \n\t" + + : [result] "+r" (result) + : [i] "r" (i), [scale] "r" (scale) + : "r0", "r1" + ); + return result; +#else + uint16_t result = 0; + asm volatile( + // result.A = HighByte(i.A x j ) + " mul %A[i], %[scale] \n\t" + " mov %A[result], r1 \n\t" + //" clr %B[result] \n\t" + + // result.A-B += i.B x j + " mul %B[i], %[scale] \n\t" + " add %A[result], r0 \n\t" + " adc %B[result], r1 \n\t" + + // cleanup r1 + " clr __zero_reg__ \n\t" + + : [result] "+r" (result) + : [i] "r" (i), [scale] "r" (scale) + : "r0", "r1" + ); + return result; +#endif +#else + #error "No implementation for scale16by8 available." +#endif +} + +/// scale a 16-bit unsigned value by a 16-bit value, +/// considered as numerator of a fraction whose denominator +/// is 65536. In other words, it computes i * (scale / 65536) + +LIB8STATIC uint16_t scale16( uint16_t i, fract16 scale ) +{ + #if SCALE16_C == 1 + uint16_t result; +#if FASTLED_SCALE8_FIXED == 1 + result = ((uint32_t)(i) * (1+(uint32_t)(scale))) / 65536; +#else + result = ((uint32_t)(i) * (uint32_t)(scale)) / 65536; +#endif + return result; +#elif SCALE16_AVRASM == 1 +#if FASTLED_SCALE8_FIXED == 1 + // implemented sort of like + // result = ((i * scale) + i ) / 65536 + // + // why not like this, you may ask? + // result = (i * (scale+1)) / 65536 + // the answer is that if scale is 65535, then scale+1 + // will be zero, which is not what we want. + uint32_t result; + asm volatile( + // result.A-B = i.A x scale.A + " mul %A[i], %A[scale] \n\t" + // save results... + // basic idea: + //" mov %A[result], r0 \n\t" + //" mov %B[result], r1 \n\t" + // which can be written as... + " movw %A[result], r0 \n\t" + // Because we're going to add i.A-B to + // result.A-D, we DO need to keep both + // the r0 and r1 portions of the product + // UNlike in the 'unfixed scale8' version. + // So the movw here is needed. + : [result] "=r" (result) + : [i] "r" (i), + [scale] "r" (scale) + : "r0", "r1" + ); + + asm volatile( + // result.C-D = i.B x scale.B + " mul %B[i], %B[scale] \n\t" + //" mov %C[result], r0 \n\t" + //" mov %D[result], r1 \n\t" + " movw %C[result], r0 \n\t" + : [result] "+r" (result) + : [i] "r" (i), + [scale] "r" (scale) + : "r0", "r1" + ); + + const uint8_t zero = 0; + asm volatile( + // result.B-D += i.B x scale.A + " mul %B[i], %A[scale] \n\t" + + " add %B[result], r0 \n\t" + " adc %C[result], r1 \n\t" + " adc %D[result], %[zero] \n\t" + + // result.B-D += i.A x scale.B + " mul %A[i], %B[scale] \n\t" + + " add %B[result], r0 \n\t" + " adc %C[result], r1 \n\t" + " adc %D[result], %[zero] \n\t" + + // cleanup r1 + " clr r1 \n\t" + + : [result] "+r" (result) + : [i] "r" (i), + [scale] "r" (scale), + [zero] "r" (zero) + : "r0", "r1" + ); + + asm volatile( + // result.A-D += i.A-B + " add %A[result], %A[i] \n\t" + " adc %B[result], %B[i] \n\t" + " adc %C[result], %[zero] \n\t" + " adc %D[result], %[zero] \n\t" + : [result] "+r" (result) + : [i] "r" (i), + [zero] "r" (zero) + ); + + result = result >> 16; + return result; +#else + uint32_t result; + asm volatile( + // result.A-B = i.A x scale.A + " mul %A[i], %A[scale] \n\t" + // save results... + // basic idea: + //" mov %A[result], r0 \n\t" + //" mov %B[result], r1 \n\t" + // which can be written as... + " movw %A[result], r0 \n\t" + // We actually don't need to do anything with r0, + // as result.A is never used again here, so we + // could just move the high byte, but movw is + // one clock cycle, just like mov, so might as + // well, in case we want to use this code for + // a generic 16x16 multiply somewhere. + + : [result] "=r" (result) + : [i] "r" (i), + [scale] "r" (scale) + : "r0", "r1" + ); + + asm volatile( + // result.C-D = i.B x scale.B + " mul %B[i], %B[scale] \n\t" + //" mov %C[result], r0 \n\t" + //" mov %D[result], r1 \n\t" + " movw %C[result], r0 \n\t" + : [result] "+r" (result) + : [i] "r" (i), + [scale] "r" (scale) + : "r0", "r1" + ); + + const uint8_t zero = 0; + asm volatile( + // result.B-D += i.B x scale.A + " mul %B[i], %A[scale] \n\t" + + " add %B[result], r0 \n\t" + " adc %C[result], r1 \n\t" + " adc %D[result], %[zero] \n\t" + + // result.B-D += i.A x scale.B + " mul %A[i], %B[scale] \n\t" + + " add %B[result], r0 \n\t" + " adc %C[result], r1 \n\t" + " adc %D[result], %[zero] \n\t" + + // cleanup r1 + " clr r1 \n\t" + + : [result] "+r" (result) + : [i] "r" (i), + [scale] "r" (scale), + [zero] "r" (zero) + : "r0", "r1" + ); + + result = result >> 16; + return result; +#endif +#else + #error "No implementation for scale16 available." +#endif +} +///@} + +///@defgroup Dimming Dimming and brightening functions +/// +/// Dimming and brightening functions +/// +/// The eye does not respond in a linear way to light. +/// High speed PWM'd LEDs at 50% duty cycle appear far +/// brighter then the 'half as bright' you might expect. +/// +/// If you want your midpoint brightness leve (128) to +/// appear half as bright as 'full' brightness (255), you +/// have to apply a 'dimming function'. +///@{ + +/// Adjust a scaling value for dimming +LIB8STATIC uint8_t dim8_raw( uint8_t x) +{ + return scale8( x, x); +} + +/// Adjust a scaling value for dimming for video (value will never go below 1) +LIB8STATIC uint8_t dim8_video( uint8_t x) +{ + return scale8_video( x, x); +} + +/// Linear version of the dimming function that halves for values < 128 +LIB8STATIC uint8_t dim8_lin( uint8_t x ) +{ + if( x & 0x80 ) { + x = scale8( x, x); + } else { + x += 1; + x /= 2; + } + return x; +} + +/// inverse of the dimming function, brighten a value +LIB8STATIC uint8_t brighten8_raw( uint8_t x) +{ + uint8_t ix = 255 - x; + return 255 - scale8( ix, ix); +} + +/// inverse of the dimming function, brighten a value +LIB8STATIC uint8_t brighten8_video( uint8_t x) +{ + uint8_t ix = 255 - x; + return 255 - scale8_video( ix, ix); +} + +/// inverse of the dimming function, brighten a value +LIB8STATIC uint8_t brighten8_lin( uint8_t x ) +{ + uint8_t ix = 255 - x; + if( ix & 0x80 ) { + ix = scale8( ix, ix); + } else { + ix += 1; + ix /= 2; + } + return 255 - ix; +} + +///@} +#endif diff --git a/lib/lib8tion/trig8.h b/lib/lib8tion/trig8.h new file mode 100644 index 00000000000..4907c6ff30a --- /dev/null +++ b/lib/lib8tion/trig8.h @@ -0,0 +1,259 @@ +#ifndef __INC_LIB8TION_TRIG_H +#define __INC_LIB8TION_TRIG_H + +///@ingroup lib8tion + +///@defgroup Trig Fast trig functions +/// Fast 8 and 16-bit approximations of sin(x) and cos(x). +/// Don't use these approximations for calculating the +/// trajectory of a rocket to Mars, but they're great +/// for art projects and LED displays. +/// +/// On Arduino/AVR, the 16-bit approximation is more than +/// 10X faster than floating point sin(x) and cos(x), while +/// the 8-bit approximation is more than 20X faster. +///@{ + +#if defined(__AVR__) +#define sin16 sin16_avr +#else +#define sin16 sin16_C +#endif + +/// Fast 16-bit approximation of sin(x). This approximation never varies more than +/// 0.69% from the floating point value you'd get by doing +/// +/// float s = sin(x) * 32767.0; +/// +/// @param theta input angle from 0-65535 +/// @returns sin of theta, value between -32767 to 32767. +LIB8STATIC int16_t sin16_avr( uint16_t theta ) +{ + static const uint8_t data[] = + { 0, 0, 49, 0, 6393%256, 6393/256, 48, 0, + 12539%256, 12539/256, 44, 0, 18204%256, 18204/256, 38, 0, + 23170%256, 23170/256, 31, 0, 27245%256, 27245/256, 23, 0, + 30273%256, 30273/256, 14, 0, 32137%256, 32137/256, 4 /*,0*/ }; + + uint16_t offset = (theta & 0x3FFF); + + // AVR doesn't have a multi-bit shift instruction, + // so if we say "offset >>= 3", gcc makes a tiny loop. + // Inserting empty volatile statements between each + // bit shift forces gcc to unroll the loop. + offset >>= 1; // 0..8191 + asm volatile(""); + offset >>= 1; // 0..4095 + asm volatile(""); + offset >>= 1; // 0..2047 + + if( theta & 0x4000 ) offset = 2047 - offset; + + uint8_t sectionX4; + sectionX4 = offset / 256; + sectionX4 *= 4; + + uint8_t m; + + union { + uint16_t b; + struct { + uint8_t blo; + uint8_t bhi; + }; + } u; + + //in effect u.b = blo + (256 * bhi); + u.blo = data[ sectionX4 ]; + u.bhi = data[ sectionX4 + 1]; + m = data[ sectionX4 + 2]; + + uint8_t secoffset8 = (uint8_t)(offset) / 2; + + uint16_t mx = m * secoffset8; + + int16_t y = mx + u.b; + if( theta & 0x8000 ) y = -y; + + return y; +} + +/// Fast 16-bit approximation of sin(x). This approximation never varies more than +/// 0.69% from the floating point value you'd get by doing +/// +/// float s = sin(x) * 32767.0; +/// +/// @param theta input angle from 0-65535 +/// @returns sin of theta, value between -32767 to 32767. +LIB8STATIC int16_t sin16_C( uint16_t theta ) +{ + static const uint16_t base[] = + { 0, 6393, 12539, 18204, 23170, 27245, 30273, 32137 }; + static const uint8_t slope[] = + { 49, 48, 44, 38, 31, 23, 14, 4 }; + + uint16_t offset = (theta & 0x3FFF) >> 3; // 0..2047 + if( theta & 0x4000 ) offset = 2047 - offset; + + uint8_t section = offset / 256; // 0..7 + uint16_t b = base[section]; + uint8_t m = slope[section]; + + uint8_t secoffset8 = (uint8_t)(offset) / 2; + + uint16_t mx = m * secoffset8; + int16_t y = mx + b; + + if( theta & 0x8000 ) y = -y; + + return y; +} + + +/// Fast 16-bit approximation of cos(x). This approximation never varies more than +/// 0.69% from the floating point value you'd get by doing +/// +/// float s = cos(x) * 32767.0; +/// +/// @param theta input angle from 0-65535 +/// @returns sin of theta, value between -32767 to 32767. +LIB8STATIC int16_t cos16( uint16_t theta) +{ + return sin16( theta + 16384); +} + +/////////////////////////////////////////////////////////////////////// + +// sin8 & cos8 +// Fast 8-bit approximations of sin(x) & cos(x). +// Input angle is an unsigned int from 0-255. +// Output is an unsigned int from 0 to 255. +// +// This approximation can vary to to 2% +// from the floating point value you'd get by doing +// float s = (sin( x ) * 128.0) + 128; +// +// Don't use this approximation for calculating the +// "real" trigonometric calculations, but it's great +// for art projects and LED displays. +// +// On Arduino/AVR, this approximation is more than +// 20X faster than floating point sin(x) and cos(x) + +#if defined(__AVR__) && !defined(LIB8_ATTINY) +#define sin8 sin8_avr +#else +#define sin8 sin8_C +#endif + + +const uint8_t b_m16_interleave[] = { 0, 49, 49, 41, 90, 27, 117, 10 }; + +/// Fast 8-bit approximation of sin(x). This approximation never varies more than +/// 2% from the floating point value you'd get by doing +/// +/// float s = (sin(x) * 128.0) + 128; +/// +/// @param theta input angle from 0-255 +/// @returns sin of theta, value between 0 and 255 +LIB8STATIC uint8_t sin8_avr( uint8_t theta) +{ + uint8_t offset = theta; + + asm volatile( + "sbrc %[theta],6 \n\t" + "com %[offset] \n\t" + : [theta] "+r" (theta), [offset] "+r" (offset) + ); + + offset &= 0x3F; // 0..63 + + uint8_t secoffset = offset & 0x0F; // 0..15 + if( theta & 0x40) secoffset++; + + uint8_t m16; uint8_t b; + + uint8_t section = offset >> 4; // 0..3 + uint8_t s2 = section * 2; + + const uint8_t* p = b_m16_interleave; + p += s2; + b = *p; + p++; + m16 = *p; + + uint8_t mx; + uint8_t xr1; + asm volatile( + "mul %[m16],%[secoffset] \n\t" + "mov %[mx],r0 \n\t" + "mov %[xr1],r1 \n\t" + "eor r1, r1 \n\t" + "swap %[mx] \n\t" + "andi %[mx],0x0F \n\t" + "swap %[xr1] \n\t" + "andi %[xr1], 0xF0 \n\t" + "or %[mx], %[xr1] \n\t" + : [mx] "=d" (mx), [xr1] "=d" (xr1) + : [m16] "d" (m16), [secoffset] "d" (secoffset) + ); + + int8_t y = mx + b; + if( theta & 0x80 ) y = -y; + + y += 128; + + return y; +} + + +/// Fast 8-bit approximation of sin(x). This approximation never varies more than +/// 2% from the floating point value you'd get by doing +/// +/// float s = (sin(x) * 128.0) + 128; +/// +/// @param theta input angle from 0-255 +/// @returns sin of theta, value between 0 and 255 +LIB8STATIC uint8_t sin8_C( uint8_t theta) +{ + uint8_t offset = theta; + if( theta & 0x40 ) { + offset = (uint8_t)255 - offset; + } + offset &= 0x3F; // 0..63 + + uint8_t secoffset = offset & 0x0F; // 0..15 + if( theta & 0x40) secoffset++; + + uint8_t section = offset >> 4; // 0..3 + uint8_t s2 = section * 2; + const uint8_t* p = b_m16_interleave; + p += s2; + uint8_t b = *p; + p++; + uint8_t m16 = *p; + + uint8_t mx = (m16 * secoffset) >> 4; + + int8_t y = mx + b; + if( theta & 0x80 ) y = -y; + + y += 128; + + return y; +} + +/// Fast 8-bit approximation of cos(x). This approximation never varies more than +/// 2% from the floating point value you'd get by doing +/// +/// float s = (cos(x) * 128.0) + 128; +/// +/// @param theta input angle from 0-255 +/// @returns sin of theta, value between 0 and 255 +LIB8STATIC uint8_t cos8( uint8_t theta) +{ + return sin8( theta + 64); +} + +///@} +#endif diff --git a/quantum/color.c b/quantum/color.c index 8ede053e711..c49877592ec 100644 --- a/quantum/color.c +++ b/quantum/color.c @@ -78,9 +78,11 @@ RGB hsv_to_rgb( HSV hsv ) break; } +#ifdef USE_CIE1931_CURVE rgb.r = pgm_read_byte( &CIE1931_CURVE[rgb.r] ); rgb.g = pgm_read_byte( &CIE1931_CURVE[rgb.g] ); rgb.b = pgm_read_byte( &CIE1931_CURVE[rgb.b] ); +#endif return rgb; } diff --git a/quantum/quantum.c b/quantum/quantum.c index 8316d1f06a3..8c928441c5a 100644 --- a/quantum/quantum.c +++ b/quantum/quantum.c @@ -274,10 +274,10 @@ bool process_record_quantum(keyrecord_t *record) { #ifdef HAPTIC_ENABLE process_haptic(keycode, record) && #endif //HAPTIC_ENABLE - process_record_kb(keycode, record) && - #if defined(RGB_MATRIX_ENABLE) && defined(RGB_MATRIX_KEYPRESSES) + #if defined(RGB_MATRIX_ENABLE) && defined(RGB_MATRIX_KEYREACTIVE_ENABLED) process_rgb_matrix(keycode, record) && #endif + process_record_kb(keycode, record) && #if defined(MIDI_ENABLE) && defined(MIDI_ADVANCED) process_midi(keycode, record) && #endif @@ -1049,12 +1049,6 @@ void matrix_init_quantum() { matrix_init_kb(); } -uint8_t rgb_matrix_task_counter = 0; - -#ifndef RGB_MATRIX_SKIP_FRAMES - #define RGB_MATRIX_SKIP_FRAMES 1 -#endif - void matrix_scan_quantum() { #if defined(AUDIO_ENABLE) && !defined(NO_MUSIC_MODE) matrix_scan_music(); @@ -1078,10 +1072,6 @@ void matrix_scan_quantum() { #ifdef RGB_MATRIX_ENABLE rgb_matrix_task(); - if (rgb_matrix_task_counter == 0) { - rgb_matrix_update_pwm_buffers(); - } - rgb_matrix_task_counter = ((rgb_matrix_task_counter + 1) % (RGB_MATRIX_SKIP_FRAMES + 1)); #endif #ifdef ENCODER_ENABLE diff --git a/quantum/rgb_matrix.c b/quantum/rgb_matrix.c index 56a97e3c7d5..0728e2431fe 100644 --- a/quantum/rgb_matrix.c +++ b/quantum/rgb_matrix.c @@ -24,62 +24,80 @@ #include #include -rgb_config_t rgb_matrix_config; +#include "lib/lib8tion/lib8tion.h" -#ifndef MAX - #define MAX(X, Y) ((X) > (Y) ? (X) : (Y)) -#endif - -#ifndef MIN - #define MIN(a,b) ((a) < (b)? (a): (b)) -#endif +#include "rgb_matrix_animations/solid_color_anim.h" +#include "rgb_matrix_animations/alpha_mods_anim.h" +#include "rgb_matrix_animations/dual_beacon_anim.h" +#include "rgb_matrix_animations/gradient_up_down_anim.h" +#include "rgb_matrix_animations/raindrops_anim.h" +#include "rgb_matrix_animations/cycle_all_anim.h" +#include "rgb_matrix_animations/cycle_left_right_anim.h" +#include "rgb_matrix_animations/cycle_up_down_anim.h" +#include "rgb_matrix_animations/rainbow_beacon_anim.h" +#include "rgb_matrix_animations/rainbow_pinwheels_anim.h" +#include "rgb_matrix_animations/rainbow_moving_chevron_anim.h" +#include "rgb_matrix_animations/jellybean_raindrops_anim.h" +#include "rgb_matrix_animations/digital_rain_anim.h" +#include "rgb_matrix_animations/solid_reactive_simple_anim.h" +#include "rgb_matrix_animations/solid_reactive_anim.h" +#include "rgb_matrix_animations/splash_anim.h" +#include "rgb_matrix_animations/solid_splash_anim.h" +#include "rgb_matrix_animations/breathing_anim.h" #ifndef RGB_DISABLE_AFTER_TIMEOUT - #define RGB_DISABLE_AFTER_TIMEOUT 0 + #define RGB_DISABLE_AFTER_TIMEOUT 0 #endif #ifndef RGB_DISABLE_WHEN_USB_SUSPENDED - #define RGB_DISABLE_WHEN_USB_SUSPENDED false + #define RGB_DISABLE_WHEN_USB_SUSPENDED false #endif #ifndef EECONFIG_RGB_MATRIX - #define EECONFIG_RGB_MATRIX EECONFIG_RGBLIGHT + #define EECONFIG_RGB_MATRIX EECONFIG_RGBLIGHT #endif -#if !defined(RGB_MATRIX_MAXIMUM_BRIGHTNESS) || RGB_MATRIX_MAXIMUM_BRIGHTNESS > 255 - #define RGB_MATRIX_MAXIMUM_BRIGHTNESS 255 +#if !defined(RGB_MATRIX_MAXIMUM_BRIGHTNESS) || RGB_MATRIX_MAXIMUM_BRIGHTNESS > UINT8_MAX + #undef RGB_MATRIX_MAXIMUM_BRIGHTNESS + #define RGB_MATRIX_MAXIMUM_BRIGHTNESS UINT8_MAX #endif -#ifndef RGB_DIGITAL_RAIN_DROPS - // lower the number for denser effect/wider keyboard - #define RGB_DIGITAL_RAIN_DROPS 24 +#if !defined(RGB_MATRIX_HUE_STEP) + #define RGB_MATRIX_HUE_STEP 8 #endif -#if !defined(DISABLE_RGB_MATRIX_RAINDROPS) || !defined(DISABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS) || !defined(DISABLE_RGB_MATRIX_DIGITAL_RAIN) - #define TRACK_PREVIOUS_EFFECT +#if !defined(RGB_MATRIX_SAT_STEP) + #define RGB_MATRIX_SAT_STEP 16 +#endif + +#if !defined(RGB_MATRIX_VAL_STEP) + #define RGB_MATRIX_VAL_STEP 16 +#endif + +#if !defined(RGB_MATRIX_SPD_STEP) + #define RGB_MATRIX_SPD_STEP 16 #endif bool g_suspend_state = false; -// Global tick at 20 Hz -uint32_t g_tick = 0; +rgb_config_t rgb_matrix_config; -// Ticks since this key was last hit. -uint8_t g_key_hit[DRIVER_LED_TOTAL]; +rgb_counters_t g_rgb_counters; +static uint32_t rgb_counters_buffer; -// Ticks since any key was last hit. -uint32_t g_any_key_hit = 0; - -#ifndef PI -#define PI 3.14159265 -#endif +#ifdef RGB_MATRIX_KEYREACTIVE_ENABLED + last_hit_t g_last_hit_tracker; + static last_hit_t last_hit_buffer; +#endif // RGB_MATRIX_KEYREACTIVE_ENABLED uint32_t eeconfig_read_rgb_matrix(void) { return eeprom_read_dword(EECONFIG_RGB_MATRIX); } + void eeconfig_update_rgb_matrix(uint32_t val) { eeprom_update_dword(EECONFIG_RGB_MATRIX, val); } + void eeconfig_update_rgb_matrix_default(void) { dprintf("eeconfig_update_rgb_matrix_default\n"); rgb_matrix_config.enable = 1; @@ -90,11 +108,12 @@ void eeconfig_update_rgb_matrix_default(void) { rgb_matrix_config.mode = RGB_MATRIX_SOLID_COLOR; #endif rgb_matrix_config.hue = 0; - rgb_matrix_config.sat = 255; + rgb_matrix_config.sat = UINT8_MAX; rgb_matrix_config.val = RGB_MATRIX_MAXIMUM_BRIGHTNESS; - rgb_matrix_config.speed = 0; + rgb_matrix_config.speed = UINT8_MAX / 2; eeconfig_update_rgb_matrix(rgb_matrix_config.raw); } + void eeconfig_debug_rgb_matrix(void) { dprintf("rgb_matrix_config eprom\n"); dprintf("rgb_matrix_config.enable = %d\n", rgb_matrix_config.enable); @@ -105,710 +124,330 @@ void eeconfig_debug_rgb_matrix(void) { dprintf("rgb_matrix_config.speed = %d\n", rgb_matrix_config.speed); } -// Last led hit -#define LED_HITS_TO_REMEMBER 8 -uint8_t g_last_led_hit[LED_HITS_TO_REMEMBER] = {255}; -uint8_t g_last_led_count = 0; - -void map_row_column_to_led( uint8_t row, uint8_t column, uint8_t *led_i, uint8_t *led_count) { - rgb_led led; - *led_count = 0; - - for (uint8_t i = 0; i < DRIVER_LED_TOTAL; i++) { - // map_index_to_led(i, &led); - led = g_rgb_leds[i]; - if (row == led.matrix_co.row && column == led.matrix_co.col) { - led_i[*led_count] = i; - (*led_count)++; - } +uint8_t rgb_matrix_map_row_column_to_led(uint8_t row, uint8_t column, uint8_t *led_i) { + // TODO: This is kinda expensive, fix this soonish + uint8_t led_count = 0; + for (uint8_t i = 0; i < DRIVER_LED_TOTAL && led_count < LED_HITS_TO_REMEMBER; i++) { + matrix_co_t matrix_co = g_rgb_leds[i].matrix_co; + if (row == matrix_co.row && column == matrix_co.col) { + led_i[led_count] = i; + led_count++; } + } + return led_count; } void rgb_matrix_update_pwm_buffers(void) { - rgb_matrix_driver.flush(); + rgb_matrix_driver.flush(); } void rgb_matrix_set_color( int index, uint8_t red, uint8_t green, uint8_t blue ) { - rgb_matrix_driver.set_color(index, red, green, blue); + rgb_matrix_driver.set_color(index, red, green, blue); } void rgb_matrix_set_color_all( uint8_t red, uint8_t green, uint8_t blue ) { - rgb_matrix_driver.set_color_all(red, green, blue); + rgb_matrix_driver.set_color_all(red, green, blue); } bool process_rgb_matrix(uint16_t keycode, keyrecord_t *record) { - if ( record->event.pressed ) { - uint8_t led[8], led_count; - map_row_column_to_led(record->event.key.row, record->event.key.col, led, &led_count); - if (led_count > 0) { - for (uint8_t i = LED_HITS_TO_REMEMBER; i > 1; i--) { - g_last_led_hit[i - 1] = g_last_led_hit[i - 2]; - } - g_last_led_hit[0] = led[0]; - g_last_led_count = MIN(LED_HITS_TO_REMEMBER, g_last_led_count + 1); - } - for(uint8_t i = 0; i < led_count; i++) - g_key_hit[led[i]] = 0; - g_any_key_hit = 0; - } else { - #ifdef RGB_MATRIX_KEYRELEASES - uint8_t led[8], led_count; - map_row_column_to_led(record->event.key.row, record->event.key.col, led, &led_count); - for(uint8_t i = 0; i < led_count; i++) - g_key_hit[led[i]] = 255; +#ifdef RGB_MATRIX_KEYREACTIVE_ENABLED + uint8_t led[LED_HITS_TO_REMEMBER]; + uint8_t led_count = 0; - g_any_key_hit = 255; - #endif - } - return true; -} +#if defined(RGB_MATRIX_KEYRELEASES) + if (!record->event.pressed) { + led_count = rgb_matrix_map_row_column_to_led(record->event.key.row, record->event.key.col, led); + g_rgb_counters.any_key_hit = 0; + } +#elif defined(RGB_MATRIX_KEYPRESSES) + if (record->event.pressed) { + led_count = rgb_matrix_map_row_column_to_led(record->event.key.row, record->event.key.col, led); + g_rgb_counters.any_key_hit = 0; + } +#endif // defined(RGB_MATRIX_KEYRELEASES) -void rgb_matrix_set_suspend_state(bool state) { - g_suspend_state = state; + if (last_hit_buffer.count + led_count > LED_HITS_TO_REMEMBER) { + memcpy(&last_hit_buffer.x[0], &last_hit_buffer.x[led_count], LED_HITS_TO_REMEMBER - led_count); + memcpy(&last_hit_buffer.y[0], &last_hit_buffer.y[led_count], LED_HITS_TO_REMEMBER - led_count); + memcpy(&last_hit_buffer.tick[0], &last_hit_buffer.tick[led_count], (LED_HITS_TO_REMEMBER - led_count) * 2); // 16 bit + memcpy(&last_hit_buffer.index[0], &last_hit_buffer.index[led_count], LED_HITS_TO_REMEMBER - led_count); + last_hit_buffer.count--; + } + + for(uint8_t i = 0; i < led_count; i++) { + uint8_t index = last_hit_buffer.count; + last_hit_buffer.x[index] = g_rgb_leds[led[i]].point.x; + last_hit_buffer.y[index] = g_rgb_leds[led[i]].point.y; + last_hit_buffer.index[index] = led[i]; + last_hit_buffer.tick[index] = 0; + last_hit_buffer.count++; + } +#endif // RGB_MATRIX_KEYREACTIVE_ENABLED + return true; } void rgb_matrix_test(void) { - // Mask out bits 4 and 5 - // Increase the factor to make the test animation slower (and reduce to make it faster) - uint8_t factor = 10; - switch ( (g_tick & (0b11 << factor)) >> factor ) - { - case 0: - { - rgb_matrix_set_color_all( 20, 0, 0 ); - break; - } - case 1: - { - rgb_matrix_set_color_all( 0, 20, 0 ); - break; - } - case 2: - { - rgb_matrix_set_color_all( 0, 0, 20 ); - break; - } - case 3: - { - rgb_matrix_set_color_all( 20, 20, 20 ); - break; - } + // Mask out bits 4 and 5 + // Increase the factor to make the test animation slower (and reduce to make it faster) + uint8_t factor = 10; + switch ( (g_rgb_counters.tick & (0b11 << factor)) >> factor ) + { + case 0: { + rgb_matrix_set_color_all( 20, 0, 0 ); + break; } -} - -// All LEDs off -void rgb_matrix_all_off(void) { - rgb_matrix_set_color_all( 0, 0, 0 ); -} - -// Solid color -void rgb_matrix_solid_color(void) { - HSV hsv = { .h = rgb_matrix_config.hue, .s = rgb_matrix_config.sat, .v = rgb_matrix_config.val }; - RGB rgb = hsv_to_rgb( hsv ); - rgb_matrix_set_color_all( rgb.r, rgb.g, rgb.b ); -} - -void rgb_matrix_solid_reactive(void) { - // Relies on hue being 8-bit and wrapping - for ( int i=0; iinit) { + return false; + } - RGB rgb1 = hsv_to_rgb( (HSV){ .h = rgb_matrix_config.hue, .s = rgb_matrix_config.sat, .v = rgb_matrix_config.val } ); - RGB rgb2 = hsv_to_rgb( (HSV){ .h = (rgb_matrix_config.hue + 180) % 360, .s = rgb_matrix_config.sat, .v = rgb_matrix_config.val } ); - - rgb_led led; - for (int i = 0; i < DRIVER_LED_TOTAL; i++) { - led = g_rgb_leds[i]; - if ( led.matrix_co.raw < 0xFF ) { - if ( led.modifier ) - { - rgb_matrix_set_color( i, rgb2.r, rgb2.g, rgb2.b ); - } - else - { - rgb_matrix_set_color( i, rgb1.r, rgb1.g, rgb1.b ); - } - } - } + RGB_MATRIX_USE_LIMITS(led_min, led_max); + for (uint8_t i = led_min; i < led_max; i++) { + rgb_matrix_set_color(i, 0, 0, 0); + } + return led_max < DRIVER_LED_TOTAL; } -void rgb_matrix_gradient_up_down(void) { - int16_t h1 = rgb_matrix_config.hue; - int16_t h2 = (rgb_matrix_config.hue + 180) % 360; - int16_t deltaH = h2 - h1; +static uint8_t rgb_last_enable = UINT8_MAX; +static uint8_t rgb_last_effect = UINT8_MAX; +static effect_params_t rgb_effect_params = { 0, 0 }; +static rgb_task_states rgb_task_state = SYNCING; - // Take the shortest path between hues - if ( deltaH > 127 ) - { - deltaH -= 256; +static void rgb_task_timers(void) { + // Update double buffer timers + uint16_t deltaTime = timer_elapsed32(rgb_counters_buffer); + rgb_counters_buffer = timer_read32(); + if (g_rgb_counters.any_key_hit < UINT32_MAX) { + if (UINT32_MAX - deltaTime < g_rgb_counters.any_key_hit) { + g_rgb_counters.any_key_hit = UINT32_MAX; + } else { + g_rgb_counters.any_key_hit += deltaTime; } - else if ( deltaH < -127 ) - { - deltaH += 256; - } - // Divide delta by 4, this gives the delta per row - deltaH /= 4; + } - int16_t s1 = rgb_matrix_config.sat; - int16_t s2 = rgb_matrix_config.hue; - int16_t deltaS = ( s2 - s1 ) / 4; - - HSV hsv = { .h = 0, .s = 255, .v = rgb_matrix_config.val }; - RGB rgb; - Point point; - for ( int i=0; i>4); - // Relies on hue being 8-bit and wrapping - hsv.h = rgb_matrix_config.hue + ( deltaH * y ); - hsv.s = rgb_matrix_config.sat + ( deltaS * y ); - rgb = hsv_to_rgb( hsv ); - rgb_matrix_set_color( i, rgb.r, rgb.g, rgb.b ); + // Update double buffer last hit timers +#ifdef RGB_MATRIX_KEYREACTIVE_ENABLED + uint8_t count = last_hit_buffer.count; + for (uint8_t i = 0; i < count; ++i) { + if (UINT16_MAX - deltaTime < last_hit_buffer.tick[i]) { + last_hit_buffer.count--; + continue; } + last_hit_buffer.tick[i] += deltaTime; + } +#endif // RGB_MATRIX_KEYREACTIVE_ENABLED } -void rgb_matrix_raindrops(bool initialize) { - int16_t h1 = rgb_matrix_config.hue; - int16_t h2 = (rgb_matrix_config.hue + 180) % 360; - int16_t deltaH = h2 - h1; - deltaH /= 4; - - // Take the shortest path between hues - if ( deltaH > 127 ) - { - deltaH -= 256; - } - else if ( deltaH < -127 ) - { - deltaH += 256; - } - - int16_t s1 = rgb_matrix_config.sat; - int16_t s2 = rgb_matrix_config.sat; - int16_t deltaS = ( s2 - s1 ) / 4; - - HSV hsv; - RGB rgb; - - // Change one LED every tick, make sure speed is not 0 - uint8_t led_to_change = ( g_tick & ( 0x0A / (rgb_matrix_config.speed == 0 ? 1 : rgb_matrix_config.speed) ) ) == 0 ? rand() % (DRIVER_LED_TOTAL) : 255; - - for ( int i=0; i= RGB_MATRIX_LED_FLUSH_LIMIT) + rgb_task_state = STARTING; } -void rgb_matrix_cycle_all(void) { - uint8_t offset = ( g_tick << rgb_matrix_config.speed ) & 0xFF; +static void rgb_task_start(void) { + // reset iter + rgb_effect_params.iter = 0; - rgb_led led; + // update double buffers + g_rgb_counters.tick = rgb_counters_buffer; +#ifdef RGB_MATRIX_KEYREACTIVE_ENABLED + g_last_hit_tracker = last_hit_buffer; +#endif // RGB_MATRIX_KEYREACTIVE_ENABLED - // Relies on hue being 8-bit and wrapping - for ( int i=0; i 0 && map[col][row] < max_intensity) { - // neither fully bright nor dark, decay it - map[col][row]--; - } - // set the pixel colour - uint8_t led, led_count; - map_row_column_to_led(row, col, &led, &led_count); - - if (map[col][row] > pure_green_intensity) { - const uint8_t boost = (uint8_t) ((uint16_t) max_brightness_boost - * (map[col][row] - pure_green_intensity) / (max_intensity - pure_green_intensity)); - rgb_matrix_set_color(led, boost, max_intensity, boost); - } - else { - const uint8_t green = (uint8_t) ((uint16_t) max_intensity * map[col][row] / pure_green_intensity); - rgb_matrix_set_color(led, 0, green, 0); - } - } - } - if (++drop > drop_ticks) { - // reset drop timer - drop = 0; - for (uint8_t row = MATRIX_ROWS - 1; row > 0; row--) { - for (uint8_t col = 0; col < MATRIX_COLS; col++) { - // if ths is on the bottom row and bright allow decay - if (row == MATRIX_ROWS - 1 && map[col][row] == max_intensity) { - map[col][row]--; - } - // check if the pixel above is bright - if (map[col][row - 1] == max_intensity) { - // allow old bright pixel to decay - map[col][row - 1]--; - // make this pixel bright - map[col][row] = max_intensity; - } - } - } - } -} - -void rgb_matrix_multisplash(void) { - // if (g_any_key_hit < 0xFF) { - HSV hsv = { .h = rgb_matrix_config.hue, .s = rgb_matrix_config.sat, .v = rgb_matrix_config.val }; - RGB rgb; - rgb_led led; - for (uint8_t i = 0; i < DRIVER_LED_TOTAL; i++) { - led = g_rgb_leds[i]; - uint16_t c = 0, d = 0; - rgb_led last_led; - // if (g_last_led_count) { - for (uint8_t last_i = 0; last_i < g_last_led_count; last_i++) { - last_led = g_rgb_leds[g_last_led_hit[last_i]]; - uint16_t dist = (uint16_t)sqrt(pow(led.point.x - last_led.point.x, 2) + pow(led.point.y - last_led.point.y, 2)); - uint16_t effect = (g_key_hit[g_last_led_hit[last_i]] << 2) - dist; - c += MIN(MAX(effect, 0), 255); - d += 255 - MIN(MAX(effect, 0), 255); - } - // } else { - // d = 255; - // } - hsv.h = (rgb_matrix_config.hue + c) % 256; - hsv.v = MAX(MIN(d, 255), 0); - rgb = hsv_to_rgb( hsv ); - rgb_matrix_set_color( i, rgb.r, rgb.g, rgb.b ); - } - // } else { - // rgb_matrix_set_color_all( 0, 0, 0 ); - // } -} - - -void rgb_matrix_splash(void) { - g_last_led_count = MIN(g_last_led_count, 1); - rgb_matrix_multisplash(); -} - - -void rgb_matrix_solid_multisplash(void) { - // if (g_any_key_hit < 0xFF) { - HSV hsv = { .h = rgb_matrix_config.hue, .s = rgb_matrix_config.sat, .v = rgb_matrix_config.val }; - RGB rgb; - rgb_led led; - for (uint8_t i = 0; i < DRIVER_LED_TOTAL; i++) { - led = g_rgb_leds[i]; - uint16_t d = 0; - rgb_led last_led; - // if (g_last_led_count) { - for (uint8_t last_i = 0; last_i < g_last_led_count; last_i++) { - last_led = g_rgb_leds[g_last_led_hit[last_i]]; - uint16_t dist = (uint16_t)sqrt(pow(led.point.x - last_led.point.x, 2) + pow(led.point.y - last_led.point.y, 2)); - uint16_t effect = (g_key_hit[g_last_led_hit[last_i]] << 2) - dist; - d += 255 - MIN(MAX(effect, 0), 255); - } - // } else { - // d = 255; - // } - hsv.v = MAX(MIN(d, 255), 0); - rgb = hsv_to_rgb( hsv ); - rgb_matrix_set_color( i, rgb.r, rgb.g, rgb.b ); - } - // } else { - // rgb_matrix_set_color_all( 0, 0, 0 ); - // } -} - - -void rgb_matrix_solid_splash(void) { - g_last_led_count = MIN(g_last_led_count, 1); - rgb_matrix_solid_multisplash(); -} - - -// Needs eeprom access that we don't have setup currently - -void rgb_matrix_custom(void) { -// HSV hsv; -// RGB rgb; -// for ( int i=0; i 0 && g_rgb_counters.any_key_hit > RGB_DISABLE_AFTER_TIMEOUT * 60 * 20)); + uint8_t effect = suspend_backlight || !rgb_matrix_config.enable ? 0 : rgb_matrix_config.mode; - if ( g_any_key_hit < 0xFFFFFFFF ) { - g_any_key_hit++; - } - - for ( int led = 0; led < DRIVER_LED_TOTAL; led++ ) { - if ( g_key_hit[led] < 255 ) { - if (g_key_hit[led] == 254) - g_last_led_count = MAX(g_last_led_count - 1, 0); - g_key_hit[led]++; - } - } - - // Factory default magic value - if ( rgb_matrix_config.mode == 255 ) { - rgb_matrix_test(); - return; - } - - // Ideally we would also stop sending zeros to the LED driver PWM buffers - // while suspended and just do a software shutdown. This is a cheap hack for now. - bool suspend_backlight = ((g_suspend_state && RGB_DISABLE_WHEN_USB_SUSPENDED) || - (RGB_DISABLE_AFTER_TIMEOUT > 0 && g_any_key_hit > RGB_DISABLE_AFTER_TIMEOUT * 60 * 20)); - uint8_t effect = suspend_backlight ? 0 : rgb_matrix_config.mode; - - #ifdef TRACK_PREVIOUS_EFFECT - // Keep track of the effect used last time, - // detect change in effect, so each effect can - // have an optional initialization. - - static uint8_t effect_last = 255; - bool initialize = (effect != effect_last) || (rgb_matrix_config.enable != toggle_enable_last); - effect_last = effect; - toggle_enable_last = rgb_matrix_config.enable; - #endif - - // this gets ticked at 20 Hz. - // each effect can opt to do calculations - // and/or request PWM buffer updates. - switch ( effect ) { - case RGB_MATRIX_SOLID_COLOR: - rgb_matrix_solid_color(); - break; - #ifndef DISABLE_RGB_MATRIX_ALPHAS_MODS - case RGB_MATRIX_ALPHAS_MODS: - rgb_matrix_alphas_mods(); - break; - #endif - #ifndef DISABLE_RGB_MATRIX_DUAL_BEACON - case RGB_MATRIX_DUAL_BEACON: - rgb_matrix_dual_beacon(); - break; - #endif - #ifndef DISABLE_RGB_MATRIX_GRADIENT_UP_DOWN - case RGB_MATRIX_GRADIENT_UP_DOWN: - rgb_matrix_gradient_up_down(); - break; - #endif - #ifndef DISABLE_RGB_MATRIX_RAINDROPS - case RGB_MATRIX_RAINDROPS: - rgb_matrix_raindrops( initialize ); - break; - #endif - #ifndef DISABLE_RGB_MATRIX_CYCLE_ALL - case RGB_MATRIX_CYCLE_ALL: - rgb_matrix_cycle_all(); - break; - #endif - #ifndef DISABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT - case RGB_MATRIX_CYCLE_LEFT_RIGHT: - rgb_matrix_cycle_left_right(); - break; - #endif - #ifndef DISABLE_RGB_MATRIX_CYCLE_UP_DOWN - case RGB_MATRIX_CYCLE_UP_DOWN: - rgb_matrix_cycle_up_down(); - break; - #endif - #ifndef DISABLE_RGB_MATRIX_RAINBOW_BEACON - case RGB_MATRIX_RAINBOW_BEACON: - rgb_matrix_rainbow_beacon(); - break; - #endif - #ifndef DISABLE_RGB_MATRIX_RAINBOW_PINWHEELS - case RGB_MATRIX_RAINBOW_PINWHEELS: - rgb_matrix_rainbow_pinwheels(); - break; - #endif - #ifndef DISABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON - case RGB_MATRIX_RAINBOW_MOVING_CHEVRON: - rgb_matrix_rainbow_moving_chevron(); - break; - #endif - #ifndef DISABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS - case RGB_MATRIX_JELLYBEAN_RAINDROPS: - rgb_matrix_jellybean_raindrops( initialize ); - break; - #endif - #ifndef DISABLE_RGB_MATRIX_DIGITAL_RAIN - case RGB_MATRIX_DIGITAL_RAIN: - rgb_matrix_digital_rain( initialize ); - break; - #endif - #ifdef RGB_MATRIX_KEYPRESSES - #ifndef DISABLE_RGB_MATRIX_SOLID_REACTIVE - case RGB_MATRIX_SOLID_REACTIVE: - rgb_matrix_solid_reactive(); - break; - #endif - #ifndef DISABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE - case RGB_MATRIX_SOLID_REACTIVE_SIMPLE: - rgb_matrix_solid_reactive_simple(); - break; - #endif - #ifndef DISABLE_RGB_MATRIX_SPLASH - case RGB_MATRIX_SPLASH: - rgb_matrix_splash(); - break; - #endif - #ifndef DISABLE_RGB_MATRIX_MULTISPLASH - case RGB_MATRIX_MULTISPLASH: - rgb_matrix_multisplash(); - break; - #endif - #ifndef DISABLE_RGB_MATRIX_SOLID_SPLASH - case RGB_MATRIX_SOLID_SPLASH: - rgb_matrix_solid_splash(); - break; - #endif - #ifndef DISABLE_RGB_MATRIX_SOLID_MULTISPLASH - case RGB_MATRIX_SOLID_MULTISPLASH: - rgb_matrix_solid_multisplash(); - break; - #endif - #endif - default: - rgb_matrix_custom(); - break; - } - - if ( ! suspend_backlight ) { - rgb_matrix_indicators(); - } + switch (rgb_task_state) { + case STARTING: + rgb_task_start(); + break; + case RENDERING: + rgb_task_render(effect); + break; + case FLUSHING: + rgb_task_flush(effect); + break; + case SYNCING: + rgb_task_sync(); + break; + } + if (!suspend_backlight) { + rgb_matrix_indicators(); + } } void rgb_matrix_indicators(void) { - rgb_matrix_indicators_kb(); - rgb_matrix_indicators_user(); + rgb_matrix_indicators_kb(); + rgb_matrix_indicators_user(); } __attribute__((weak)) @@ -817,103 +456,54 @@ void rgb_matrix_indicators_kb(void) {} __attribute__((weak)) void rgb_matrix_indicators_user(void) {} - -// void rgb_matrix_set_indicator_index( uint8_t *index, uint8_t row, uint8_t column ) -// { -// if ( row >= MATRIX_ROWS ) -// { -// // Special value, 255=none, 254=all -// *index = row; -// } -// else -// { -// // This needs updated to something like -// // uint8_t led[8], led_count; -// // map_row_column_to_led(row,column,led,&led_count); -// // for(uint8_t i = 0; i < led_count; i++) -// map_row_column_to_led( row, column, index ); -// } -// } - void rgb_matrix_init(void) { rgb_matrix_driver.init(); // TODO: put the 1 second startup delay here? - // clear the key hits - for ( int led=0; ledh = eeprom_read_byte(address); -// hsv->s = eeprom_read_byte(address+1); -// hsv->v = eeprom_read_byte(address+2); -// } - -// void backlight_set_key_color( uint8_t row, uint8_t column, HSV hsv ) -// { -// uint8_t led[8], led_count; -// map_row_column_to_led(row,column,led,&led_count); -// for(uint8_t i = 0; i < led_count; i++) { -// if ( led[i] < DRIVER_LED_TOTAL ) -// { -// void *address = backlight_get_custom_key_color_eeprom_address(led[i]); -// eeprom_update_byte(address, hsv.h); -// eeprom_update_byte(address+1, hsv.s); -// eeprom_update_byte(address+2, hsv.v); -// } -// } -// } - -uint32_t rgb_matrix_get_tick(void) { - return g_tick; +void rgb_matrix_set_suspend_state(bool state) { + g_suspend_state = state; } void rgb_matrix_toggle(void) { - rgb_matrix_config.enable ^= 1; - eeconfig_update_rgb_matrix(rgb_matrix_config.raw); + rgb_matrix_config.enable ^= 1; + if (!rgb_matrix_config.enable) { + rgb_task_state = STARTING; + } + eeconfig_update_rgb_matrix(rgb_matrix_config.raw); } void rgb_matrix_enable(void) { rgb_matrix_config.enable = 1; - eeconfig_update_rgb_matrix(rgb_matrix_config.raw); + eeconfig_update_rgb_matrix(rgb_matrix_config.raw); } void rgb_matrix_enable_noeeprom(void) { @@ -922,7 +512,7 @@ void rgb_matrix_enable_noeeprom(void) { void rgb_matrix_disable(void) { rgb_matrix_config.enable = 0; - eeconfig_update_rgb_matrix(rgb_matrix_config.raw); + eeconfig_update_rgb_matrix(rgb_matrix_config.raw); } void rgb_matrix_disable_noeeprom(void) { @@ -930,76 +520,79 @@ void rgb_matrix_disable_noeeprom(void) { } void rgb_matrix_step(void) { - rgb_matrix_config.mode++; - if (rgb_matrix_config.mode >= RGB_MATRIX_EFFECT_MAX) - rgb_matrix_config.mode = 1; - eeconfig_update_rgb_matrix(rgb_matrix_config.raw); + rgb_matrix_config.mode++; + if (rgb_matrix_config.mode >= RGB_MATRIX_EFFECT_MAX) + rgb_matrix_config.mode = 1; + rgb_task_state = STARTING; + eeconfig_update_rgb_matrix(rgb_matrix_config.raw); } void rgb_matrix_step_reverse(void) { - rgb_matrix_config.mode--; - if (rgb_matrix_config.mode < 1) - rgb_matrix_config.mode = RGB_MATRIX_EFFECT_MAX - 1; - eeconfig_update_rgb_matrix(rgb_matrix_config.raw); + rgb_matrix_config.mode--; + if (rgb_matrix_config.mode < 1) + rgb_matrix_config.mode = RGB_MATRIX_EFFECT_MAX - 1; + rgb_task_state = STARTING; + eeconfig_update_rgb_matrix(rgb_matrix_config.raw); } void rgb_matrix_increase_hue(void) { - rgb_matrix_config.hue = increment( rgb_matrix_config.hue, 8, 0, 255 ); - eeconfig_update_rgb_matrix(rgb_matrix_config.raw); + rgb_matrix_config.hue += RGB_MATRIX_HUE_STEP; + eeconfig_update_rgb_matrix(rgb_matrix_config.raw); } void rgb_matrix_decrease_hue(void) { - rgb_matrix_config.hue = decrement( rgb_matrix_config.hue, 8, 0, 255 ); - eeconfig_update_rgb_matrix(rgb_matrix_config.raw); + rgb_matrix_config.hue -= RGB_MATRIX_HUE_STEP; + eeconfig_update_rgb_matrix(rgb_matrix_config.raw); } void rgb_matrix_increase_sat(void) { - rgb_matrix_config.sat = increment( rgb_matrix_config.sat, 8, 0, 255 ); - eeconfig_update_rgb_matrix(rgb_matrix_config.raw); + rgb_matrix_config.sat = qadd8(rgb_matrix_config.sat, RGB_MATRIX_SAT_STEP); + eeconfig_update_rgb_matrix(rgb_matrix_config.raw); } void rgb_matrix_decrease_sat(void) { - rgb_matrix_config.sat = decrement( rgb_matrix_config.sat, 8, 0, 255 ); - eeconfig_update_rgb_matrix(rgb_matrix_config.raw); + rgb_matrix_config.sat = qsub8(rgb_matrix_config.sat, RGB_MATRIX_SAT_STEP); + eeconfig_update_rgb_matrix(rgb_matrix_config.raw); } void rgb_matrix_increase_val(void) { - rgb_matrix_config.val = increment( rgb_matrix_config.val, 8, 0, RGB_MATRIX_MAXIMUM_BRIGHTNESS ); - eeconfig_update_rgb_matrix(rgb_matrix_config.raw); + rgb_matrix_config.val = qadd8(rgb_matrix_config.val, RGB_MATRIX_VAL_STEP); + if (rgb_matrix_config.val > RGB_MATRIX_MAXIMUM_BRIGHTNESS) + rgb_matrix_config.val = RGB_MATRIX_MAXIMUM_BRIGHTNESS; + eeconfig_update_rgb_matrix(rgb_matrix_config.raw); } void rgb_matrix_decrease_val(void) { - rgb_matrix_config.val = decrement( rgb_matrix_config.val, 8, 0, RGB_MATRIX_MAXIMUM_BRIGHTNESS ); - eeconfig_update_rgb_matrix(rgb_matrix_config.raw); + rgb_matrix_config.val = qsub8(rgb_matrix_config.val, RGB_MATRIX_VAL_STEP); + eeconfig_update_rgb_matrix(rgb_matrix_config.raw); } void rgb_matrix_increase_speed(void) { - rgb_matrix_config.speed = increment( rgb_matrix_config.speed, 1, 0, 3 ); - eeconfig_update_rgb_matrix(rgb_matrix_config.raw);//EECONFIG needs to be increased to support this + rgb_matrix_config.speed = qadd8(rgb_matrix_config.speed, RGB_MATRIX_SPD_STEP); + eeconfig_update_rgb_matrix(rgb_matrix_config.raw);//EECONFIG needs to be increased to support this } void rgb_matrix_decrease_speed(void) { - rgb_matrix_config.speed = decrement( rgb_matrix_config.speed, 1, 0, 3 ); - eeconfig_update_rgb_matrix(rgb_matrix_config.raw);//EECONFIG needs to be increased to support this + rgb_matrix_config.speed = qsub8(rgb_matrix_config.speed, RGB_MATRIX_SPD_STEP); + eeconfig_update_rgb_matrix(rgb_matrix_config.raw);//EECONFIG needs to be increased to support this } void rgb_matrix_mode(uint8_t mode) { - rgb_matrix_config.mode = mode; - eeconfig_update_rgb_matrix(rgb_matrix_config.raw); + rgb_matrix_config.mode = mode; + rgb_task_state = STARTING; + eeconfig_update_rgb_matrix(rgb_matrix_config.raw); } void rgb_matrix_mode_noeeprom(uint8_t mode) { - rgb_matrix_config.mode = mode; + rgb_matrix_config.mode = mode; } uint8_t rgb_matrix_get_mode(void) { - return rgb_matrix_config.mode; + return rgb_matrix_config.mode; } void rgb_matrix_sethsv(uint16_t hue, uint8_t sat, uint8_t val) { - rgb_matrix_config.hue = hue; - rgb_matrix_config.sat = sat; - rgb_matrix_config.val = val; + rgb_matrix_sethsv_noeeprom(hue, sat, val); eeconfig_update_rgb_matrix(rgb_matrix_config.raw); } @@ -1007,4 +600,6 @@ void rgb_matrix_sethsv_noeeprom(uint16_t hue, uint8_t sat, uint8_t val) { rgb_matrix_config.hue = hue; rgb_matrix_config.sat = sat; rgb_matrix_config.val = val; + if (rgb_matrix_config.val > RGB_MATRIX_MAXIMUM_BRIGHTNESS) + rgb_matrix_config.val = RGB_MATRIX_MAXIMUM_BRIGHTNESS; } diff --git a/quantum/rgb_matrix.h b/quantum/rgb_matrix.h index e6acd2d4b51..855ea03230f 100644 --- a/quantum/rgb_matrix.h +++ b/quantum/rgb_matrix.h @@ -21,32 +21,33 @@ #include #include +#include "rgb_matrix_types.h" #include "color.h" #include "quantum.h" #ifdef IS31FL3731 - #include "is31fl3731.h" + #include "is31fl3731.h" #elif defined (IS31FL3733) - #include "is31fl3733.h" + #include "is31fl3733.h" #endif -typedef struct Point { - uint8_t x; - uint8_t y; -} __attribute__((packed)) Point; +#ifndef RGB_MATRIX_LED_FLUSH_LIMIT + #define RGB_MATRIX_LED_FLUSH_LIMIT 16 +#endif -typedef struct rgb_led { - union { - uint8_t raw; - struct { - uint8_t row:4; // 16 max - uint8_t col:4; // 16 max - }; - } matrix_co; - Point point; - uint8_t modifier:1; -} __attribute__((packed)) rgb_led; +#ifndef RGB_MATRIX_LED_PROCESS_LIMIT + #define RGB_MATRIX_LED_PROCESS_LIMIT (DRIVER_LED_TOTAL + 4) / 5 +#endif +#if defined(RGB_MATRIX_LED_PROCESS_LIMIT) && RGB_MATRIX_LED_PROCESS_LIMIT > 0 && RGB_MATRIX_LED_PROCESS_LIMIT < DRIVER_LED_TOTAL +#define RGB_MATRIX_USE_LIMITS(min, max) uint8_t min = RGB_MATRIX_LED_PROCESS_LIMIT * params->iter; \ + uint8_t max = min + RGB_MATRIX_LED_PROCESS_LIMIT; \ + if (max > DRIVER_LED_TOTAL) \ + max = DRIVER_LED_TOTAL; +#else +#define RGB_MATRIX_USE_LIMITS(min, max) uint8_t min = 0; \ + uint8_t max = DRIVER_LED_TOTAL; +#endif extern const rgb_led g_rgb_leds[DRIVER_LED_TOTAL]; @@ -56,79 +57,73 @@ typedef struct uint8_t index; } rgb_indicator; -typedef union { - uint32_t raw; - struct { - bool enable :1; - uint8_t mode :6; - uint16_t hue :9; - uint8_t sat :8; - uint8_t val :8; - uint8_t speed :8;//EECONFIG needs to be increased to support this - }; -} rgb_config_t; - enum rgb_matrix_effects { + RGB_MATRIX_NONE = 0, RGB_MATRIX_SOLID_COLOR = 1, #ifndef DISABLE_RGB_MATRIX_ALPHAS_MODS - RGB_MATRIX_ALPHAS_MODS, -#endif -#ifndef DISABLE_RGB_MATRIX_DUAL_BEACON - RGB_MATRIX_DUAL_BEACON, -#endif + RGB_MATRIX_ALPHAS_MODS, +#endif // DISABLE_RGB_MATRIX_ALPHAS_MODS #ifndef DISABLE_RGB_MATRIX_GRADIENT_UP_DOWN - RGB_MATRIX_GRADIENT_UP_DOWN, -#endif -#ifndef DISABLE_RGB_MATRIX_RAINDROPS - RGB_MATRIX_RAINDROPS, -#endif + RGB_MATRIX_GRADIENT_UP_DOWN, +#endif // DISABLE_RGB_MATRIX_GRADIENT_UP_DOWN +#ifndef DISABLE_RGB_MATRIX_BREATHING + RGB_MATRIX_BREATHING, +#endif // DISABLE_RGB_MATRIX_BREATHING #ifndef DISABLE_RGB_MATRIX_CYCLE_ALL - RGB_MATRIX_CYCLE_ALL, -#endif + RGB_MATRIX_CYCLE_ALL, +#endif // DISABLE_RGB_MATRIX_CYCLE_ALL #ifndef DISABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT - RGB_MATRIX_CYCLE_LEFT_RIGHT, -#endif + RGB_MATRIX_CYCLE_LEFT_RIGHT, +#endif // DISABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT #ifndef DISABLE_RGB_MATRIX_CYCLE_UP_DOWN - RGB_MATRIX_CYCLE_UP_DOWN, -#endif -#ifndef DISABLE_RGB_MATRIX_RAINBOW_BEACON - RGB_MATRIX_RAINBOW_BEACON, -#endif -#ifndef DISABLE_RGB_MATRIX_RAINBOW_PINWHEELS - RGB_MATRIX_RAINBOW_PINWHEELS, -#endif + RGB_MATRIX_CYCLE_UP_DOWN, +#endif // DISABLE_RGB_MATRIX_CYCLE_UP_DOWN #ifndef DISABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON - RGB_MATRIX_RAINBOW_MOVING_CHEVRON, -#endif + RGB_MATRIX_RAINBOW_MOVING_CHEVRON, +#endif // DISABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON +#ifndef DISABLE_RGB_MATRIX_DUAL_BEACON + RGB_MATRIX_DUAL_BEACON, +#endif // DISABLE_RGB_MATRIX_DUAL_BEACON +#ifndef DISABLE_RGB_MATRIX_RAINBOW_BEACON + RGB_MATRIX_RAINBOW_BEACON, +#endif // DISABLE_RGB_MATRIX_RAINBOW_BEACON +#ifndef DISABLE_RGB_MATRIX_RAINBOW_PINWHEELS + RGB_MATRIX_RAINBOW_PINWHEELS, +#endif // DISABLE_RGB_MATRIX_RAINBOW_PINWHEELS +#ifndef DISABLE_RGB_MATRIX_RAINDROPS + RGB_MATRIX_RAINDROPS, +#endif // DISABLE_RGB_MATRIX_RAINDROPS #ifndef DISABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS - RGB_MATRIX_JELLYBEAN_RAINDROPS, -#endif + RGB_MATRIX_JELLYBEAN_RAINDROPS, +#endif // DISABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS #ifndef DISABLE_RGB_MATRIX_DIGITAL_RAIN - RGB_MATRIX_DIGITAL_RAIN, -#endif -#ifdef RGB_MATRIX_KEYPRESSES - #ifndef DISABLE_RGB_MATRIX_SOLID_REACTIVE - RGB_MATRIX_SOLID_REACTIVE, - #endif - #ifndef DISABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE - RGB_MATRIX_SOLID_REACTIVE_SIMPLE, - #endif - #ifndef DISABLE_RGB_MATRIX_SPLASH - RGB_MATRIX_SPLASH, - #endif - #ifndef DISABLE_RGB_MATRIX_MULTISPLASH - RGB_MATRIX_MULTISPLASH, - #endif - #ifndef DISABLE_RGB_MATRIX_SOLID_SPLASH - RGB_MATRIX_SOLID_SPLASH, - #endif - #ifndef DISABLE_RGB_MATRIX_SOLID_MULTISPLASH - RGB_MATRIX_SOLID_MULTISPLASH, - #endif -#endif - RGB_MATRIX_EFFECT_MAX + RGB_MATRIX_DIGITAL_RAIN, +#endif // DISABLE_RGB_MATRIX_DIGITAL_RAIN +#ifdef RGB_MATRIX_KEYREACTIVE_ENABLED +#ifndef DISABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE + RGB_MATRIX_SOLID_REACTIVE_SIMPLE, +#endif // DISABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE +#ifndef DISABLE_RGB_MATRIX_SOLID_REACTIVE + RGB_MATRIX_SOLID_REACTIVE, +#endif // DISABLE_RGB_MATRIX_SOLID_REACTIVE +#ifndef DISABLE_RGB_MATRIX_SPLASH + RGB_MATRIX_SPLASH, +#endif // DISABLE_RGB_MATRIX_SPLASH +#ifndef DISABLE_RGB_MATRIX_MULTISPLASH + RGB_MATRIX_MULTISPLASH, +#endif // DISABLE_RGB_MATRIX_MULTISPLASH +#ifndef DISABLE_RGB_MATRIX_SOLID_SPLASH + RGB_MATRIX_SOLID_SPLASH, +#endif // DISABLE_RGB_MATRIX_SOLID_SPLASH +#ifndef DISABLE_RGB_MATRIX_SOLID_MULTISPLASH + RGB_MATRIX_SOLID_MULTISPLASH, +#endif // DISABLE_RGB_MATRIX_SOLID_MULTISPLASH +#endif // RGB_MATRIX_KEYREACTIVE_ENABLED + RGB_MATRIX_EFFECT_MAX }; +uint8_t rgb_matrix_map_row_column_to_led( uint8_t row, uint8_t column, uint8_t *led_i); + void rgb_matrix_set_color( int index, uint8_t red, uint8_t green, uint8_t blue ); void rgb_matrix_set_color_all( uint8_t red, uint8_t green, uint8_t blue ); @@ -162,8 +157,6 @@ void rgb_matrix_decrease(void); // void backlight_get_key_color( uint8_t led, HSV *hsv ); // void backlight_set_key_color( uint8_t row, uint8_t column, HSV hsv ); -uint32_t rgb_matrix_get_tick(void); - void rgb_matrix_toggle(void); void rgb_matrix_enable(void); void rgb_matrix_enable_noeeprom(void); @@ -212,7 +205,6 @@ uint8_t rgb_matrix_get_mode(void); typedef struct { /* Perform any initialisation required for the other driver functions to work. */ void (*init)(void); - /* Set the colour of a single LED in the buffer. */ void (*set_color)(int index, uint8_t r, uint8_t g, uint8_t b); /* Set the colour of all LEDS on the keyboard in the buffer. */ diff --git a/quantum/rgb_matrix_animations/alpha_mods_anim.h b/quantum/rgb_matrix_animations/alpha_mods_anim.h new file mode 100644 index 00000000000..cc1914d7f4f --- /dev/null +++ b/quantum/rgb_matrix_animations/alpha_mods_anim.h @@ -0,0 +1,26 @@ +#pragma once +#ifndef DISABLE_RGB_MATRIX_ALPHAS_MODS + +extern const rgb_led g_rgb_leds[DRIVER_LED_TOTAL]; +extern rgb_config_t rgb_matrix_config; + +// alphas = color1, mods = color2 +bool rgb_matrix_alphas_mods(effect_params_t* params) { + RGB_MATRIX_USE_LIMITS(led_min, led_max); + + HSV hsv = { rgb_matrix_config.hue, rgb_matrix_config.sat, rgb_matrix_config.val }; + RGB rgb1 = hsv_to_rgb(hsv); + hsv.h += rgb_matrix_config.speed; + RGB rgb2 = hsv_to_rgb(hsv); + + for (uint8_t i = led_min; i < led_max; i++) { + if (g_rgb_leds[i].modifier) { + rgb_matrix_set_color(i, rgb2.r, rgb2.g, rgb2.b); + } else { + rgb_matrix_set_color(i, rgb1.r, rgb1.g, rgb1.b); + } + } + return led_max < DRIVER_LED_TOTAL; +} + +#endif // DISABLE_RGB_MATRIX_ALPHAS_MODS diff --git a/quantum/rgb_matrix_animations/breathing_anim.h b/quantum/rgb_matrix_animations/breathing_anim.h new file mode 100644 index 00000000000..fb90b66bdf0 --- /dev/null +++ b/quantum/rgb_matrix_animations/breathing_anim.h @@ -0,0 +1,19 @@ +#pragma once +#ifndef DISABLE_RGB_MATRIX_BREATHING + +extern rgb_config_t rgb_matrix_config; + +bool rgb_matrix_breathing(effect_params_t* params) { + RGB_MATRIX_USE_LIMITS(led_min, led_max); + + uint16_t time = scale16by8(g_rgb_counters.tick, rgb_matrix_config.speed / 8); + uint8_t val = scale8(abs8(sin8(time) - 128) * 2, rgb_matrix_config.val); + HSV hsv = { rgb_matrix_config.hue, rgb_matrix_config.sat, val }; + RGB rgb = hsv_to_rgb(hsv); + for (uint8_t i = led_min; i < led_max; i++) { + rgb_matrix_set_color(i, rgb.r, rgb.g, rgb.b); + } + return led_max < DRIVER_LED_TOTAL; +} + +#endif // DISABLE_RGB_MATRIX_BREATHING diff --git a/quantum/rgb_matrix_animations/cycle_all_anim.h b/quantum/rgb_matrix_animations/cycle_all_anim.h new file mode 100644 index 00000000000..5c18cfa0c91 --- /dev/null +++ b/quantum/rgb_matrix_animations/cycle_all_anim.h @@ -0,0 +1,21 @@ +#pragma once +#ifndef DISABLE_RGB_MATRIX_CYCLE_ALL + +extern rgb_counters_t g_rgb_counters; +extern const rgb_led g_rgb_leds[DRIVER_LED_TOTAL]; +extern rgb_config_t rgb_matrix_config; + +bool rgb_matrix_cycle_all(effect_params_t* params) { + RGB_MATRIX_USE_LIMITS(led_min, led_max); + + HSV hsv = { 0, rgb_matrix_config.sat, rgb_matrix_config.val }; + uint8_t time = scale16by8(g_rgb_counters.tick, rgb_matrix_config.speed / 4); + for (uint8_t i = led_min; i < led_max; i++) { + hsv.h = time; + RGB rgb = hsv_to_rgb(hsv); + rgb_matrix_set_color(i, rgb.r, rgb.g, rgb.b); + } + return led_max < DRIVER_LED_TOTAL; +} + +#endif // DISABLE_RGB_MATRIX_CYCLE_ALL diff --git a/quantum/rgb_matrix_animations/cycle_left_right_anim.h b/quantum/rgb_matrix_animations/cycle_left_right_anim.h new file mode 100644 index 00000000000..f519aeb476f --- /dev/null +++ b/quantum/rgb_matrix_animations/cycle_left_right_anim.h @@ -0,0 +1,22 @@ +#pragma once +#ifndef DISABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT + +extern rgb_counters_t g_rgb_counters; +extern const rgb_led g_rgb_leds[DRIVER_LED_TOTAL]; +extern rgb_config_t rgb_matrix_config; + +bool rgb_matrix_cycle_left_right(effect_params_t* params) { + RGB_MATRIX_USE_LIMITS(led_min, led_max); + + HSV hsv = { 0, rgb_matrix_config.sat, rgb_matrix_config.val }; + uint8_t time = scale16by8(g_rgb_counters.tick, rgb_matrix_config.speed / 4); + for (uint8_t i = led_min; i < led_max; i++) { + point_t point = g_rgb_leds[i].point; + hsv.h = point.x - time; + RGB rgb = hsv_to_rgb(hsv); + rgb_matrix_set_color(i, rgb.r, rgb.g, rgb.b); + } + return led_max < DRIVER_LED_TOTAL; +} + +#endif // DISABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT diff --git a/quantum/rgb_matrix_animations/cycle_up_down_anim.h b/quantum/rgb_matrix_animations/cycle_up_down_anim.h new file mode 100644 index 00000000000..8b91d890de3 --- /dev/null +++ b/quantum/rgb_matrix_animations/cycle_up_down_anim.h @@ -0,0 +1,22 @@ +#pragma once +#ifndef DISABLE_RGB_MATRIX_CYCLE_UP_DOWN + +extern rgb_counters_t g_rgb_counters; +extern const rgb_led g_rgb_leds[DRIVER_LED_TOTAL]; +extern rgb_config_t rgb_matrix_config; + +bool rgb_matrix_cycle_up_down(effect_params_t* params) { + RGB_MATRIX_USE_LIMITS(led_min, led_max); + + HSV hsv = { 0, rgb_matrix_config.sat, rgb_matrix_config.val }; + uint8_t time = scale16by8(g_rgb_counters.tick, rgb_matrix_config.speed / 4); + for (uint8_t i = led_min; i < led_max; i++) { + point_t point = g_rgb_leds[i].point; + hsv.h = point.y - time; + RGB rgb = hsv_to_rgb(hsv); + rgb_matrix_set_color(i, rgb.r, rgb.g, rgb.b); + } + return led_max < DRIVER_LED_TOTAL; +} + +#endif // DISABLE_RGB_MATRIX_CYCLE_UP_DOWN diff --git a/quantum/rgb_matrix_animations/digital_rain_anim.h b/quantum/rgb_matrix_animations/digital_rain_anim.h new file mode 100644 index 00000000000..4ba3c1c87d6 --- /dev/null +++ b/quantum/rgb_matrix_animations/digital_rain_anim.h @@ -0,0 +1,74 @@ +#pragma once +#ifndef DISABLE_RGB_MATRIX_DIGITAL_RAIN + +#ifndef RGB_DIGITAL_RAIN_DROPS + // lower the number for denser effect/wider keyboard + #define RGB_DIGITAL_RAIN_DROPS 24 +#endif + +bool rgb_matrix_digital_rain(effect_params_t* params) { + // algorithm ported from https://github.com/tremby/Kaleidoscope-LEDEffect-DigitalRain + const uint8_t drop_ticks = 28; + const uint8_t pure_green_intensity = 0xd0; + const uint8_t max_brightness_boost = 0xc0; + const uint8_t max_intensity = 0xff; + + static uint8_t map[MATRIX_COLS][MATRIX_ROWS] = {{0}}; + static uint8_t drop = 0; + + if (params->init) { + rgb_matrix_set_color_all(0, 0, 0); + memset(map, 0, sizeof map); + drop = 0; + } + for (uint8_t col = 0; col < MATRIX_COLS; col++) { + for (uint8_t row = 0; row < MATRIX_ROWS; row++) { + if (row == 0 && drop == 0 && rand() < RAND_MAX / RGB_DIGITAL_RAIN_DROPS) { + // top row, pixels have just fallen and we're + // making a new rain drop in this column + map[col][row] = max_intensity; + } + else if (map[col][row] > 0 && map[col][row] < max_intensity) { + // neither fully bright nor dark, decay it + map[col][row]--; + } + // set the pixel colour + uint8_t led[LED_HITS_TO_REMEMBER]; + uint8_t led_count = rgb_matrix_map_row_column_to_led(row, col, led); + + // TODO: multiple leds are supported mapped to the same row/column + if (led_count > 0) { + if (map[col][row] > pure_green_intensity) { + const uint8_t boost = (uint8_t) ((uint16_t) max_brightness_boost * (map[col][row] - pure_green_intensity) / (max_intensity - pure_green_intensity)); + rgb_matrix_set_color(led[0], boost, max_intensity, boost); + } + else { + const uint8_t green = (uint8_t) ((uint16_t) max_intensity * map[col][row] / pure_green_intensity); + rgb_matrix_set_color(led[0], 0, green, 0); + } + } + } + } + if (++drop > drop_ticks) { + // reset drop timer + drop = 0; + for (uint8_t row = MATRIX_ROWS - 1; row > 0; row--) { + for (uint8_t col = 0; col < MATRIX_COLS; col++) { + // if ths is on the bottom row and bright allow decay + if (row == MATRIX_ROWS - 1 && map[col][row] == max_intensity) { + map[col][row]--; + } + // check if the pixel above is bright + if (map[col][row - 1] == max_intensity) { + // allow old bright pixel to decay + map[col][row - 1]--; + // make this pixel bright + map[col][row] = max_intensity; + } + } + } + } + return false; +} + +#endif // DISABLE_RGB_MATRIX_DIGITAL_RAIN diff --git a/quantum/rgb_matrix_animations/dual_beacon_anim.h b/quantum/rgb_matrix_animations/dual_beacon_anim.h new file mode 100644 index 00000000000..dda31578094 --- /dev/null +++ b/quantum/rgb_matrix_animations/dual_beacon_anim.h @@ -0,0 +1,24 @@ +#pragma once +#ifndef DISABLE_RGB_MATRIX_DUAL_BEACON + +extern rgb_counters_t g_rgb_counters; +extern const rgb_led g_rgb_leds[DRIVER_LED_TOTAL]; +extern rgb_config_t rgb_matrix_config; + +bool rgb_matrix_dual_beacon(effect_params_t* params) { + RGB_MATRIX_USE_LIMITS(led_min, led_max); + + HSV hsv = { 0, rgb_matrix_config.sat, rgb_matrix_config.val }; + uint16_t time = scale16by8(g_rgb_counters.tick, rgb_matrix_config.speed / 4); + int8_t cos_value = cos8(time) - 128; + int8_t sin_value = sin8(time) - 128; + for (uint8_t i = led_min; i < led_max; i++) { + point_t point = g_rgb_leds[i].point; + hsv.h = ((point.y - 32) * cos_value + (point.x - 112) * sin_value) / 128 + rgb_matrix_config.hue; + RGB rgb = hsv_to_rgb(hsv); + rgb_matrix_set_color(i, rgb.r, rgb.g, rgb.b); + } + return led_max < DRIVER_LED_TOTAL; +} + +#endif // DISABLE_RGB_MATRIX_DUAL_BEACON diff --git a/quantum/rgb_matrix_animations/gradient_up_down_anim.h b/quantum/rgb_matrix_animations/gradient_up_down_anim.h new file mode 100644 index 00000000000..11498e22f5c --- /dev/null +++ b/quantum/rgb_matrix_animations/gradient_up_down_anim.h @@ -0,0 +1,22 @@ +#pragma once +#ifndef DISABLE_RGB_MATRIX_GRADIENT_UP_DOWN + +extern const rgb_led g_rgb_leds[DRIVER_LED_TOTAL]; +extern rgb_config_t rgb_matrix_config; + +bool rgb_matrix_gradient_up_down(effect_params_t* params) { + RGB_MATRIX_USE_LIMITS(led_min, led_max); + + HSV hsv = { 0, rgb_matrix_config.sat, rgb_matrix_config.val }; + uint8_t scale = scale8(64, rgb_matrix_config.speed); + for (uint8_t i = led_min; i < led_max; i++) { + point_t point = g_rgb_leds[i].point; + // The y range will be 0..64, map this to 0..4 + // Relies on hue being 8-bit and wrapping + hsv.h = rgb_matrix_config.hue + scale * (point.y >> 4); + RGB rgb = hsv_to_rgb(hsv); + rgb_matrix_set_color(i, rgb.r, rgb.g, rgb.b); + } + return led_max < DRIVER_LED_TOTAL; +} +#endif // DISABLE_RGB_MATRIX_GRADIENT_UP_DOWN diff --git a/quantum/rgb_matrix_animations/jellybean_raindrops_anim.h b/quantum/rgb_matrix_animations/jellybean_raindrops_anim.h new file mode 100644 index 00000000000..01ff5c23060 --- /dev/null +++ b/quantum/rgb_matrix_animations/jellybean_raindrops_anim.h @@ -0,0 +1,30 @@ +#pragma once +#ifndef DISABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS + +extern rgb_counters_t g_rgb_counters; +extern const rgb_led g_rgb_leds[DRIVER_LED_TOTAL]; +extern rgb_config_t rgb_matrix_config; + +static void jellybean_raindrops_set_color(int i) { + HSV hsv = { rand() & 0xFF , rand() & 0xFF, rgb_matrix_config.val }; + RGB rgb = hsv_to_rgb(hsv); + rgb_matrix_set_color(i, rgb.r, rgb.g, rgb.b); +} + +bool rgb_matrix_jellybean_raindrops(effect_params_t* params) { + if (!params->init) { + // Change one LED every tick, make sure speed is not 0 + if (scale16by8(g_rgb_counters.tick, qadd8(rgb_matrix_config.speed, 16)) % 5 == 0) { + jellybean_raindrops_set_color(rand() % DRIVER_LED_TOTAL); + } + return false; + } + + RGB_MATRIX_USE_LIMITS(led_min, led_max); + for (int i = led_min; i < led_max; i++) { + jellybean_raindrops_set_color(i); + } + return led_max < DRIVER_LED_TOTAL; +} + +#endif // DISABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS diff --git a/quantum/rgb_matrix_animations/rainbow_beacon_anim.h b/quantum/rgb_matrix_animations/rainbow_beacon_anim.h new file mode 100644 index 00000000000..3c15e64ab66 --- /dev/null +++ b/quantum/rgb_matrix_animations/rainbow_beacon_anim.h @@ -0,0 +1,24 @@ +#pragma once +#ifndef DISABLE_RGB_MATRIX_RAINBOW_BEACON + +extern rgb_counters_t g_rgb_counters; +extern const rgb_led g_rgb_leds[DRIVER_LED_TOTAL]; +extern rgb_config_t rgb_matrix_config; + +bool rgb_matrix_rainbow_beacon(effect_params_t* params) { + RGB_MATRIX_USE_LIMITS(led_min, led_max); + + HSV hsv = { 0, rgb_matrix_config.sat, rgb_matrix_config.val }; + uint16_t time = scale16by8(g_rgb_counters.tick, rgb_matrix_config.speed / 4); + int16_t cos_value = 2 * (cos8(time) - 128); + int16_t sin_value = 2 * (sin8(time) - 128); + for (uint8_t i = led_min; i < led_max; i++) { + point_t point = g_rgb_leds[i].point; + hsv.h = ((point.y - 32) * cos_value + (point.x - 112) * sin_value) / 128 + rgb_matrix_config.hue; + RGB rgb = hsv_to_rgb(hsv); + rgb_matrix_set_color(i, rgb.r, rgb.g, rgb.b); + } + return led_max < DRIVER_LED_TOTAL; +} + +#endif // DISABLE_RGB_MATRIX_RAINBOW_BEACON diff --git a/quantum/rgb_matrix_animations/rainbow_moving_chevron_anim.h b/quantum/rgb_matrix_animations/rainbow_moving_chevron_anim.h new file mode 100644 index 00000000000..0d11d52802b --- /dev/null +++ b/quantum/rgb_matrix_animations/rainbow_moving_chevron_anim.h @@ -0,0 +1,22 @@ +#pragma once +#ifndef DISABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON + +extern rgb_counters_t g_rgb_counters; +extern const rgb_led g_rgb_leds[DRIVER_LED_TOTAL]; +extern rgb_config_t rgb_matrix_config; + +bool rgb_matrix_rainbow_moving_chevron(effect_params_t* params) { + RGB_MATRIX_USE_LIMITS(led_min, led_max); + + HSV hsv = { 0, rgb_matrix_config.sat, rgb_matrix_config.val }; + uint8_t time = scale16by8(g_rgb_counters.tick, rgb_matrix_config.speed / 4); + for (uint8_t i = led_min; i < led_max; i++) { + point_t point = g_rgb_leds[i].point; + hsv.h = abs8(point.y - 32) + (point.x - time) + rgb_matrix_config.hue; + RGB rgb = hsv_to_rgb(hsv); + rgb_matrix_set_color(i, rgb.r, rgb.g, rgb.b); + } + return led_max < DRIVER_LED_TOTAL; +} + +#endif // DISABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON diff --git a/quantum/rgb_matrix_animations/rainbow_pinwheels_anim.h b/quantum/rgb_matrix_animations/rainbow_pinwheels_anim.h new file mode 100644 index 00000000000..d7cd42cbe84 --- /dev/null +++ b/quantum/rgb_matrix_animations/rainbow_pinwheels_anim.h @@ -0,0 +1,24 @@ +#pragma once +#ifndef DISABLE_RGB_MATRIX_RAINBOW_PINWHEELS + +extern rgb_counters_t g_rgb_counters; +extern const rgb_led g_rgb_leds[DRIVER_LED_TOTAL]; +extern rgb_config_t rgb_matrix_config; + +bool rgb_matrix_rainbow_pinwheels(effect_params_t* params) { + RGB_MATRIX_USE_LIMITS(led_min, led_max); + + HSV hsv = { 0, rgb_matrix_config.sat, rgb_matrix_config.val }; + uint16_t time = scale16by8(g_rgb_counters.tick, rgb_matrix_config.speed / 4); + int16_t cos_value = 3 * (cos8(time) - 128); + int16_t sin_value = 3 * (sin8(time) - 128); + for (uint8_t i = led_min; i < led_max; i++) { + point_t point = g_rgb_leds[i].point; + hsv.h = ((point.y - 32) * cos_value + (56 - abs8(point.x - 112)) * sin_value) / 128 + rgb_matrix_config.hue; + RGB rgb = hsv_to_rgb(hsv); + rgb_matrix_set_color(i, rgb.r, rgb.g, rgb.b); + } + return led_max < DRIVER_LED_TOTAL; +} + +#endif // DISABLE_RGB_MATRIX_RAINBOW_PINWHEELS diff --git a/quantum/rgb_matrix_animations/raindrops_anim.h b/quantum/rgb_matrix_animations/raindrops_anim.h new file mode 100644 index 00000000000..fc721375b05 --- /dev/null +++ b/quantum/rgb_matrix_animations/raindrops_anim.h @@ -0,0 +1,40 @@ +#pragma once +#ifndef DISABLE_RGB_MATRIX_RAINDROPS +#include "rgb_matrix_types.h" + +extern rgb_counters_t g_rgb_counters; +extern rgb_config_t rgb_matrix_config; + +static void raindrops_set_color(int i) { + HSV hsv = { 0 , rgb_matrix_config.sat, rgb_matrix_config.val }; + + // Take the shortest path between hues + int16_t deltaH = ((rgb_matrix_config.hue + 180) % 360 - rgb_matrix_config.hue) / 4; + if (deltaH > 127) { + deltaH -= 256; + } else if (deltaH < -127) { + deltaH += 256; + } + + hsv.h = rgb_matrix_config.hue + (deltaH * (rand() & 0x03)); + RGB rgb = hsv_to_rgb(hsv); + rgb_matrix_set_color(i, rgb.r, rgb.g, rgb.b); +} + +bool rgb_matrix_raindrops(effect_params_t* params) { + if (!params->init) { + // Change one LED every tick, make sure speed is not 0 + if (scale16by8(g_rgb_counters.tick, qadd8(rgb_matrix_config.speed, 16)) % 10 == 0) { + raindrops_set_color(rand() % DRIVER_LED_TOTAL); + } + return false; + } + + RGB_MATRIX_USE_LIMITS(led_min, led_max); + for (int i = led_min; i < led_max; i++) { + raindrops_set_color(i); + } + return led_max < DRIVER_LED_TOTAL; +} + +#endif // DISABLE_RGB_MATRIX_RAINDROPS diff --git a/quantum/rgb_matrix_animations/solid_color_anim.h b/quantum/rgb_matrix_animations/solid_color_anim.h new file mode 100644 index 00000000000..24a197beb34 --- /dev/null +++ b/quantum/rgb_matrix_animations/solid_color_anim.h @@ -0,0 +1,14 @@ +#pragma once + +extern rgb_config_t rgb_matrix_config; + +bool rgb_matrix_solid_color(effect_params_t* params) { + RGB_MATRIX_USE_LIMITS(led_min, led_max); + + HSV hsv = { rgb_matrix_config.hue, rgb_matrix_config.sat, rgb_matrix_config.val }; + RGB rgb = hsv_to_rgb(hsv); + for (uint8_t i = led_min; i < led_max; i++) { + rgb_matrix_set_color(i, rgb.r, rgb.g, rgb.b); + } + return led_max < DRIVER_LED_TOTAL; +} diff --git a/quantum/rgb_matrix_animations/solid_reactive_anim.h b/quantum/rgb_matrix_animations/solid_reactive_anim.h new file mode 100644 index 00000000000..220e542331a --- /dev/null +++ b/quantum/rgb_matrix_animations/solid_reactive_anim.h @@ -0,0 +1,33 @@ +#pragma once +#if defined(RGB_MATRIX_KEYREACTIVE_ENABLED) +#ifndef DISABLE_RGB_MATRIX_SOLID_REACTIVE + +extern rgb_config_t rgb_matrix_config; +extern last_hit_t g_last_hit_tracker; + +bool rgb_matrix_solid_reactive(effect_params_t* params) { + RGB_MATRIX_USE_LIMITS(led_min, led_max); + + HSV hsv = { rgb_matrix_config.hue, 255, rgb_matrix_config.val }; + // Max tick based on speed scale ensures results from scale16by8 with rgb_matrix_config.speed are no greater than 255 + uint16_t max_tick = 65535 / rgb_matrix_config.speed; + // Relies on hue being 8-bit and wrapping + for (uint8_t i = led_min; i < led_max; i++) { + uint16_t tick = max_tick; + for(uint8_t j = 0; j < g_last_hit_tracker.count; j++) { + if (g_last_hit_tracker.index[j] == i && g_last_hit_tracker.tick[j] < tick) { + tick = g_last_hit_tracker.tick[j]; + break; + } + } + + uint16_t offset = scale16by8(tick, rgb_matrix_config.speed); + hsv.h = rgb_matrix_config.hue + qsub8(130, offset); + RGB rgb = hsv_to_rgb(hsv); + rgb_matrix_set_color(i, rgb.r, rgb.g, rgb.b); + } + return led_max < DRIVER_LED_TOTAL; +} + +#endif // DISABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON +#endif // defined(RGB_MATRIX_KEYREACTIVE_ENABLED) diff --git a/quantum/rgb_matrix_animations/solid_reactive_simple_anim.h b/quantum/rgb_matrix_animations/solid_reactive_simple_anim.h new file mode 100644 index 00000000000..e84cd693924 --- /dev/null +++ b/quantum/rgb_matrix_animations/solid_reactive_simple_anim.h @@ -0,0 +1,32 @@ +#pragma once +#ifdef RGB_MATRIX_KEYREACTIVE_ENABLED +#ifndef DISABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE + +extern rgb_config_t rgb_matrix_config; +extern last_hit_t g_last_hit_tracker; + +bool rgb_matrix_solid_reactive_simple(effect_params_t* params) { + RGB_MATRIX_USE_LIMITS(led_min, led_max); + + HSV hsv = { rgb_matrix_config.hue, rgb_matrix_config.sat, 0 }; + // Max tick based on speed scale ensures results from scale16by8 with rgb_matrix_config.speed are no greater than 255 + uint16_t max_tick = 65535 / rgb_matrix_config.speed; + for (uint8_t i = led_min; i < led_max; i++) { + uint16_t tick = max_tick; + for(uint8_t j = 0; j < g_last_hit_tracker.count; j++) { + if (g_last_hit_tracker.index[j] == i && g_last_hit_tracker.tick[j] < tick) { + tick = g_last_hit_tracker.tick[j]; + break; + } + } + + uint16_t offset = scale16by8(tick, rgb_matrix_config.speed); + hsv.v = scale8(255 - offset, rgb_matrix_config.val); + RGB rgb = hsv_to_rgb(hsv); + rgb_matrix_set_color(i, rgb.r, rgb.g, rgb.b); + } + return led_max < DRIVER_LED_TOTAL; +} + +#endif // DISABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE +#endif // RGB_MATRIX_KEYREACTIVE_ENABLED diff --git a/quantum/rgb_matrix_animations/solid_splash_anim.h b/quantum/rgb_matrix_animations/solid_splash_anim.h new file mode 100644 index 00000000000..82ac055b88d --- /dev/null +++ b/quantum/rgb_matrix_animations/solid_splash_anim.h @@ -0,0 +1,42 @@ +#pragma once +#ifdef RGB_MATRIX_KEYREACTIVE_ENABLED +#if !defined(DISABLE_RGB_MATRIX_SOLID_SPLASH) || !defined(DISABLE_RGB_MATRIX_SOLID_MULTISPLASH) + +extern const rgb_led g_rgb_leds[DRIVER_LED_TOTAL]; +extern rgb_config_t rgb_matrix_config; +extern last_hit_t g_last_hit_tracker; + +static bool rgb_matrix_solid_multisplash_range(uint8_t start, effect_params_t* params) { + RGB_MATRIX_USE_LIMITS(led_min, led_max); + + HSV hsv = { rgb_matrix_config.hue, rgb_matrix_config.sat, 0 }; + uint8_t count = g_last_hit_tracker.count; + for (uint8_t i = led_min; i < led_max; i++) { + hsv.v = 0; + point_t point = g_rgb_leds[i].point; + for (uint8_t j = start; j < count; j++) { + int16_t dx = point.x - g_last_hit_tracker.x[j]; + int16_t dy = point.y - g_last_hit_tracker.y[j]; + uint8_t dist = sqrt16(dx * dx + dy * dy); + uint16_t effect = scale16by8(g_last_hit_tracker.tick[j], rgb_matrix_config.speed) - dist; + if (effect > 255) + effect = 255; + hsv.v = qadd8(hsv.v, 255 - effect); + } + hsv.v = scale8(hsv.v, rgb_matrix_config.val); + RGB rgb = hsv_to_rgb(hsv); + rgb_matrix_set_color(i, rgb.r, rgb.g, rgb.b); + } + return led_max < DRIVER_LED_TOTAL; +} + +bool rgb_matrix_solid_multisplash(effect_params_t* params) { + return rgb_matrix_solid_multisplash_range(0, params); +} + +bool rgb_matrix_solid_splash(effect_params_t* params) { + return rgb_matrix_solid_multisplash_range(qsub8(g_last_hit_tracker.count, 1), params); +} + +#endif // !defined(DISABLE_RGB_MATRIX_SPLASH) && !defined(DISABLE_RGB_MATRIX_MULTISPLASH) +#endif // RGB_MATRIX_KEYREACTIVE_ENABLED diff --git a/quantum/rgb_matrix_animations/splash_anim.h b/quantum/rgb_matrix_animations/splash_anim.h new file mode 100644 index 00000000000..829d30eef51 --- /dev/null +++ b/quantum/rgb_matrix_animations/splash_anim.h @@ -0,0 +1,44 @@ +#pragma once +#ifdef RGB_MATRIX_KEYREACTIVE_ENABLED +#if !defined(DISABLE_RGB_MATRIX_SPLASH) || !defined(DISABLE_RGB_MATRIX_MULTISPLASH) + +extern const rgb_led g_rgb_leds[DRIVER_LED_TOTAL]; +extern rgb_config_t rgb_matrix_config; +extern last_hit_t g_last_hit_tracker; + +static bool rgb_matrix_multisplash_range(uint8_t start, effect_params_t* params) { + RGB_MATRIX_USE_LIMITS(led_min, led_max); + + HSV hsv = { 0, rgb_matrix_config.sat, 0 }; + uint8_t count = g_last_hit_tracker.count; + for (uint8_t i = led_min; i < led_max; i++) { + hsv.h = rgb_matrix_config.hue; + hsv.v = 0; + point_t point = g_rgb_leds[i].point; + for (uint8_t j = start; j < count; j++) { + int16_t dx = point.x - g_last_hit_tracker.x[j]; + int16_t dy = point.y - g_last_hit_tracker.y[j]; + uint8_t dist = sqrt16(dx * dx + dy * dy); + uint16_t effect = scale16by8(g_last_hit_tracker.tick[j], rgb_matrix_config.speed) - dist; + if (effect > 255) + effect = 255; + hsv.h += effect; + hsv.v = qadd8(hsv.v, 255 - effect); + } + hsv.v = scale8(hsv.v, rgb_matrix_config.val); + RGB rgb = hsv_to_rgb(hsv); + rgb_matrix_set_color(i, rgb.r, rgb.g, rgb.b); + } + return led_max < DRIVER_LED_TOTAL; +} + +bool rgb_matrix_multisplash(effect_params_t* params) { + return rgb_matrix_multisplash_range(0, params); +} + +bool rgb_matrix_splash(effect_params_t* params) { + return rgb_matrix_multisplash_range(qsub8(g_last_hit_tracker.count, 1), params); +} + +#endif // !defined(DISABLE_RGB_MATRIX_SPLASH) || !defined(DISABLE_RGB_MATRIX_MULTISPLASH) +#endif // RGB_MATRIX_KEYREACTIVE_ENABLED diff --git a/quantum/rgb_matrix_types.h b/quantum/rgb_matrix_types.h new file mode 100644 index 00000000000..f7643d2b0c8 --- /dev/null +++ b/quantum/rgb_matrix_types.h @@ -0,0 +1,90 @@ +#pragma once + +#include +#include + +#if defined(__GNUC__) +#define PACKED __attribute__ ((__packed__)) +#else +#define PACKED +#endif + +#if defined(_MSC_VER) +#pragma pack( push, 1 ) +#endif + +#if defined(RGB_MATRIX_KEYPRESSES) || defined(RGB_MATRIX_KEYRELEASES) + #define RGB_MATRIX_KEYREACTIVE_ENABLED +#endif + +// Last led hit +#ifndef LED_HITS_TO_REMEMBER + #define LED_HITS_TO_REMEMBER 8 +#endif // LED_HITS_TO_REMEMBER + +#ifdef RGB_MATRIX_KEYREACTIVE_ENABLED +typedef struct PACKED { + uint8_t count; + uint8_t x[LED_HITS_TO_REMEMBER]; + uint8_t y[LED_HITS_TO_REMEMBER]; + uint8_t index[LED_HITS_TO_REMEMBER]; + uint16_t tick[LED_HITS_TO_REMEMBER]; +} last_hit_t; +#endif // RGB_MATRIX_KEYREACTIVE_ENABLED + +typedef enum rgb_task_states { + STARTING, + RENDERING, + FLUSHING, + SYNCING +} rgb_task_states; + +typedef uint8_t led_flags_t; + +typedef struct PACKED { + uint8_t iter; + led_flags_t flags; + bool init; +} effect_params_t; + +typedef struct PACKED { + // Global tick at 20 Hz + uint32_t tick; + // Ticks since this key was last hit. + uint32_t any_key_hit; +} rgb_counters_t; + +typedef struct PACKED { + uint8_t x; + uint8_t y; +} point_t; + +typedef union { + uint8_t raw; + struct { + uint8_t row:4; // 16 max + uint8_t col:4; // 16 max + }; +} matrix_co_t; + +typedef struct PACKED { + matrix_co_t matrix_co; + point_t point; + uint8_t modifier:1; +} rgb_led; + +typedef union { + uint32_t raw; + struct PACKED { + bool enable :1; + uint8_t mode :7; + uint8_t hue :8; + uint8_t sat :8; + uint8_t val :8; + uint8_t speed :8;//EECONFIG needs to be increased to support this + }; +} rgb_config_t; + +#if defined(_MSC_VER) +#pragma pack( pop ) +#endif From ca19cd8bb8f76cbc12b4f6461cbc78438bda9563 Mon Sep 17 00:00:00 2001 From: stanrc85 <47038504+stanrc85@users.noreply.github.com> Date: Tue, 2 Apr 2019 20:33:17 -0400 Subject: [PATCH 011/171] remove uneeded returns floating around --- users/stanrc85/stanrc85.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/users/stanrc85/stanrc85.c b/users/stanrc85/stanrc85.c index 4a46d61daac..78b0c4a1496 100644 --- a/users/stanrc85/stanrc85.c +++ b/users/stanrc85/stanrc85.c @@ -77,7 +77,6 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) { send_string_with_delay_P(PSTR(SS_TAP(X_ENTER)), 10); set_mods(mods); } - return false; break; case KC_RDP: //Opens Windows RDP if (!record->event.pressed) { @@ -88,7 +87,6 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) { send_string_with_delay_P(PSTR("mstsc"), 10); send_string_with_delay_P(PSTR(SS_TAP(X_ENTER)), 10); } - return false; break; } return process_record_keymap(keycode, record); From 6c865772372f1266189270571d3b87a7dd3a2ac6 Mon Sep 17 00:00:00 2001 From: moyi4681 Date: Wed, 3 Apr 2019 11:41:00 +0800 Subject: [PATCH 012/171] [Keyboard] fix dz60rgb response speed (#5540) --- keyboards/dztech/dz60rgb/config.h | 2 ++ 1 file changed, 2 insertions(+) diff --git a/keyboards/dztech/dz60rgb/config.h b/keyboards/dztech/dz60rgb/config.h index 3a6f4bcc07e..f43b39810f8 100644 --- a/keyboards/dztech/dz60rgb/config.h +++ b/keyboards/dztech/dz60rgb/config.h @@ -24,6 +24,8 @@ #define RGB_DISABLE_AFTER_TIMEOUT 0 // number of ticks to wait until disabling effects #define RGB_DISABLE_WHEN_USB_SUSPENDED false // turn off effects when suspended #define RGB_MATRIX_KEYPRESSES +#define RGB_MATRIX_LED_PROCESS_LIMIT 4 +#define RGB_MATRIX_LED_FLUSH_LIMIT 26 #define DISABLE_RGB_MATRIX_SPLASH #define DISABLE_RGB_MATRIX_MULTISPLASH #define DISABLE_RGB_MATRIX_SOLID_MULTISPLASH From 1a625ae2c0c2cbbb5e4761b577d242c6f90e23ea Mon Sep 17 00:00:00 2001 From: stanrc85 <47038504+stanrc85@users.noreply.github.com> Date: Wed, 3 Apr 2019 09:18:00 -0400 Subject: [PATCH 013/171] Removed duplicated zeal60 files --- users/stanrc85/rgb_backlight.c | 1964 ----------------------- users/stanrc85/rgb_backlight.h | 110 -- users/stanrc85/rgb_backlight_api.h | 43 - users/stanrc85/rgb_backlight_keycodes.h | 34 - 4 files changed, 2151 deletions(-) delete mode 100644 users/stanrc85/rgb_backlight.c delete mode 100644 users/stanrc85/rgb_backlight.h delete mode 100644 users/stanrc85/rgb_backlight_api.h delete mode 100644 users/stanrc85/rgb_backlight_keycodes.h diff --git a/users/stanrc85/rgb_backlight.c b/users/stanrc85/rgb_backlight.c deleted file mode 100644 index dc5d7834b70..00000000000 --- a/users/stanrc85/rgb_backlight.c +++ /dev/null @@ -1,1964 +0,0 @@ -/* Copyright 2017 Jason Williams (Wilba) - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - */ -#if RGB_BACKLIGHT_ENABLED - -#if defined (RGB_BACKLIGHT_ZEAL60) || defined (RGB_BACKLIGHT_ZEAL65) || defined (RGB_BACKLIGHT_M60_A) || defined(RGB_BACKLIGHT_M6_B) || defined(RGB_BACKLIGHT_KOYU) || defined(RGB_BACKLIGHT_HS60) -#else -#error None of the following was defined: RGB_BACKLIGHT_ZEAL60, RGB_BACKLIGHT_ZEAL65, RGB_BACKLIGHT_M60_A, RGB_BACKLIGHT_M6_B, RGB_BACKLIGHT_KOYU -#endif - -#ifndef MAX - #define MAX(X, Y) ((X) > (Y) ? (X) : (Y)) -#endif - -#ifndef MIN - #define MIN(a,b) ((a) < (b)? (a): (b)) -#endif - -#include "quantum.h" -#include "rgb_backlight.h" -#include "rgb_backlight_api.h" -#include "rgb_backlight_keycodes.h" - -#if !defined(RGB_BACKLIGHT_HS60) -#include -#include -#include -#include "drivers/avr/i2c_master.h" -#else -#include "ch.h" -#include "hal.h" -#include "drivers/arm/i2c_master.h" -#include "tmk_core/common/eeprom.h" -#endif -#include "progmem.h" -#include "quantum/color.h" - -#if defined (RGB_BACKLIGHT_M6_B) -#include "drivers/issi/is31fl3218.h" -#define BACKLIGHT_LED_COUNT 6 -#elif defined (RGB_BACKLIGHT_HS60) -#include "drivers/issi/is31fl3733.h" -#define BACKLIGHT_LED_COUNT 64 -#else -#include "drivers/issi/is31fl3731.h" -#define BACKLIGHT_LED_COUNT 72 -#endif - -#define BACKLIGHT_EFFECT_MAX 10 - -backlight_config g_config = { - .use_split_backspace = RGB_BACKLIGHT_USE_SPLIT_BACKSPACE, - .use_split_left_shift = RGB_BACKLIGHT_USE_SPLIT_LEFT_SHIFT, - .use_split_right_shift = RGB_BACKLIGHT_USE_SPLIT_RIGHT_SHIFT, - .use_7u_spacebar = RGB_BACKLIGHT_USE_7U_SPACEBAR, - .use_iso_enter = RGB_BACKLIGHT_USE_ISO_ENTER, - .disable_hhkb_blocker_leds = RGB_BACKLIGHT_DISABLE_HHKB_BLOCKER_LEDS, - .disable_when_usb_suspended = RGB_BACKLIGHT_DISABLE_WHEN_USB_SUSPENDED, - .disable_after_timeout = RGB_BACKLIGHT_DISABLE_AFTER_TIMEOUT, - .brightness = 125, - .effect = RGB_BACKLIGHT_EFFECT, - .effect_speed = 0, - .color_1 = { .h = 0, .s = 255 }, - .color_2 = { .h = 150, .s = 255 }, - .caps_lock_indicator = { .color = { .h = 200, .s = 255 }, .index = 3-1 }, //purple - .layer_1_indicator = { .color = { .h = 100, .s = 255 }, .index = 60-1 }, //green - .layer_2_indicator = { .color = { .h = 150, .s = 255 }, .index = 60-1 }, //blue - .layer_3_indicator = { .color = { .h = 0, .s = 0 }, .index = 60-1 }, //white - .alphas_mods = { - RGB_BACKLIGHT_ALPHAS_MODS_ROW_0, - RGB_BACKLIGHT_ALPHAS_MODS_ROW_1, - RGB_BACKLIGHT_ALPHAS_MODS_ROW_2, - RGB_BACKLIGHT_ALPHAS_MODS_ROW_3, - RGB_BACKLIGHT_ALPHAS_MODS_ROW_4 }, -#if defined(RGB_BACKLIGHT_M6_B) - .custom_color = { { 0, 255 }, { 43, 255 }, { 85, 255 }, { 128, 255 }, { 171, 255 }, { 213, 255 } } -#endif -}; - -bool g_suspend_state = false; -uint8_t g_indicator_state = 0; - -// Global tick at 20 Hz -uint32_t g_tick = 0; - -// Ticks since this key was last hit. -uint8_t g_key_hit[BACKLIGHT_LED_COUNT]; - -// Ticks since any key was last hit. -uint32_t g_any_key_hit = 0; - -#if defined(RGB_BACKLIGHT_HS60) - -// This is a 7-bit address, that gets left-shifted and bit 0 -// set to 0 for write, 1 for read (as per I2C protocol) -// ADDR_2 is not needed. it is here as a dummy -#define ISSI_ADDR_1 0x50 -#define ISSI_ADDR_2 0x50 - -const is31_led g_is31_leds[DRIVER_LED_TOTAL] = { -/* Refer to IS31 manual for these locations - * driver - * | R location - * | | G location - * | | | B location - * | | | | */ - {0, B_1, A_1, C_1}, //LA1 - {0, E_1, D_1, F_1}, //LA2 - {0, H_1, G_1, I_1}, //LA3 - {0, K_1, J_1, L_1}, //LA4 - {0, B_2, A_2, C_2}, //LA5 - {0, E_2, D_2, F_2}, //LA6 - {0, H_2, G_2, I_2}, //LA7 - {0, K_2, J_2, L_2}, //LA8 - {0, B_3, A_3, C_3}, //LA9 - {0, E_3, D_3, F_3}, //LA10 - {0, H_3, G_3, I_3}, //LA11 - {0, K_3, J_3, L_3}, //LA12 - {0, B_4, A_4, C_4}, //LA13 - {0, E_4, D_4, F_4}, //LA14 - {0, H_4, G_4, I_4}, //LA15 - {0, K_4, J_4, L_4}, //LA16 - {0, B_5, A_5, C_5}, //LA17 - {0, E_5, D_5, F_5}, //LA18 - {0, H_5, G_5, I_5}, //LA19 - {0, K_5, J_5, L_5}, //LA20 - {0, B_6, A_6, C_6}, //LA21 - {0, E_6, D_6, F_6}, //LA22 - {0, H_6, G_6, I_6}, //LA23 - {0, K_6, J_6, L_6}, //LA24 - {0, B_7, A_7, C_7}, //LA25 - {0, E_7, D_7, F_7}, //LA26 - {0, H_7, G_7, I_7}, //LA27 - {0, K_7, J_7, L_7}, //LA28 - {0, B_8, A_8, C_8}, //LA29 - {0, E_8, D_8, F_8}, //LA30 - {0, H_8, G_8, I_8}, //LA31 - {0, K_8, J_8, L_8}, //LA32 - {0, B_9, A_9, C_9}, //LA33 - {0, E_9, D_9, F_9}, //LA34 - {0, H_9, G_9, I_9}, //LA35 - {0, K_9, J_9, L_9}, //LA36 - {0, B_10, A_10, C_10}, //LA37 - {0, E_10, D_10, F_10}, //LA38 - {0, H_10, G_10, I_10}, //LA39 - {0, K_10, J_10, L_10}, //LA40 - {0, B_11, A_11, C_11}, //LA41 - {0, E_11, D_11, F_11}, //LA42 - {0, H_11, G_11, I_11}, //LA43 - {0, K_11, J_11, L_11}, //LA44 - {0, B_12, A_12, C_12}, //LA45 - {0, E_12, D_12, F_12}, //LA46 - {0, H_12, G_12, I_12}, //LA47 - {0, K_12, J_12, L_12}, //LA48 - {0, B_13, A_13, C_13}, //LA49 - {0, E_13, D_13, F_13}, //LA50 - {0, H_13, G_13, I_13}, //LA51 - {0, K_13, J_13, L_13}, //LA52 - {0, B_14, A_14, C_14}, //LA53 - {0, E_14, D_14, F_14}, //LA54 - {0, H_14, G_14, I_14}, //LA55 - {0, K_14, J_14, L_14}, //LA56 - {0, B_15, A_15, C_15}, //LA57 - {0, E_15, D_15, F_15}, //LA58 - {0, H_15, G_15, I_15}, //LA59 - {0, K_15, J_15, L_15}, //LA60 - {0, B_16, A_16, C_16}, //LA61 - {0, E_16, D_16, F_16}, //LA62 - {0, H_16, G_16, I_16}, //LA63 - {0, K_16, J_16, L_16}, //LA64 -}; - -#elif !defined(RGB_BACKLIGHT_M6_B) -// This is a 7-bit address, that gets left-shifted and bit 0 -// set to 0 for write, 1 for read (as per I2C protocol) -#define ISSI_ADDR_1 0x74 -#define ISSI_ADDR_2 0x76 - -const is31_led g_is31_leds[DRIVER_LED_TOTAL] = { -/* Refer to IS31 manual for these locations - * driver - * | R location - * | | G location - * | | | B location - * | | | | */ - {0, C2_1, C3_1, C4_1}, // LA0 - {0, C1_1, C3_2, C4_2}, // LA1 - {0, C1_2, C2_2, C4_3}, // LA2 - {0, C1_3, C2_3, C3_3}, // LA3 - {0, C1_4, C2_4, C3_4}, // LA4 - {0, C1_5, C2_5, C3_5}, // LA5 - {0, C1_6, C2_6, C3_6}, // LA6 - {0, C1_7, C2_7, C3_7}, // LA7 - {0, C1_8, C2_8, C3_8}, // LA8 - {0, C9_1, C8_1, C7_1}, // LA9 - {0, C9_2, C8_2, C7_2}, // LA10 - {0, C9_3, C8_3, C7_3}, // LA11 - {0, C9_4, C8_4, C7_4}, // LA12 - {0, C9_5, C8_5, C7_5}, // LA13 - {0, C9_6, C8_6, C7_6}, // LA14 - {0, C9_7, C8_7, C6_6}, // LA15 - {0, C9_8, C7_7, C6_7}, // LA16 - {0, C8_8, C7_8, C6_8}, // LA17 - - {0, C2_9, C3_9, C4_9}, // LB0 - {0, C1_9, C3_10, C4_10}, // LB1 - {0, C1_10, C2_10, C4_11}, // LB2 - {0, C1_11, C2_11, C3_11}, // LB3 - {0, C1_12, C2_12, C3_12}, // LB4 - {0, C1_13, C2_13, C3_13}, // LB5 - {0, C1_14, C2_14, C3_14}, // LB6 - {0, C1_15, C2_15, C3_15}, // LB7 - {0, C1_16, C2_16, C3_16}, // LB8 - {0, C9_9, C8_9, C7_9}, // LB9 - {0, C9_10, C8_10, C7_10}, // LB10 - {0, C9_11, C8_11, C7_11}, // LB11 - {0, C9_12, C8_12, C7_12}, // LB12 - {0, C9_13, C8_13, C7_13}, // LB13 - {0, C9_14, C8_14, C7_14}, // LB14 - {0, C9_15, C8_15, C6_14}, // LB15 - {0, C9_16, C7_15, C6_15}, // LB16 - {0, C8_16, C7_16, C6_16}, // LB17 - - {1, C2_1, C3_1, C4_1}, // LC0 - {1, C1_1, C3_2, C4_2}, // LC1 - {1, C1_2, C2_2, C4_3}, // LC2 - {1, C1_3, C2_3, C3_3}, // LC3 - {1, C1_4, C2_4, C3_4}, // LC4 - {1, C1_5, C2_5, C3_5}, // LC5 - {1, C1_6, C2_6, C3_6}, // LC6 - {1, C1_7, C2_7, C3_7}, // LC7 - {1, C1_8, C2_8, C3_8}, // LC8 - {1, C9_1, C8_1, C7_1}, // LC9 - {1, C9_2, C8_2, C7_2}, // LC10 - {1, C9_3, C8_3, C7_3}, // LC11 - {1, C9_4, C8_4, C7_4}, // LC12 - {1, C9_5, C8_5, C7_5}, // LC13 - {1, C9_6, C8_6, C7_6}, // LC14 - {1, C9_7, C8_7, C6_6}, // LC15 - {1, C9_8, C7_7, C6_7}, // LC16 - {1, C8_8, C7_8, C6_8}, // LC17 - - {1, C2_9, C3_9, C4_9}, // LD0 - {1, C1_9, C3_10, C4_10}, // LD1 - {1, C1_10, C2_10, C4_11}, // LD2 - {1, C1_11, C2_11, C3_11}, // LD3 - {1, C1_12, C2_12, C3_12}, // LD4 - {1, C1_13, C2_13, C3_13}, // LD5 - {1, C1_14, C2_14, C3_14}, // LD6 - {1, C1_15, C2_15, C3_15}, // LD7 - {1, C1_16, C2_16, C3_16}, // LD8 - {1, C9_9, C8_9, C7_9}, // LD9 - {1, C9_10, C8_10, C7_10}, // LD10 - {1, C9_11, C8_11, C7_11}, // LD11 - {1, C9_12, C8_12, C7_12}, // LD12 - {1, C9_13, C8_13, C7_13}, // LD13 - {1, C9_14, C8_14, C7_14}, // LD14 - {1, C9_15, C8_15, C6_14}, // LD15 - {1, C9_16, C7_15, C6_15}, // LD16 - {1, C8_16, C7_16, C6_16}, // LD17 -}; -#endif // !defined(RGB_BACKLIGHT_M6_B) - - -typedef struct Point { - uint8_t x; - uint8_t y; -} Point; - - -// index in range 0..71 (LA0..LA17, LB0..LB17, LC0..LC17, LD0..LD17) -// point values in range x=0..224 y=0..64 -// origin is center of top-left key (i.e Esc) -#if defined (RGB_BACKLIGHT_ZEAL65) -const Point g_map_led_to_point[BACKLIGHT_LED_COUNT] PROGMEM = { - // LA0..LA17 - {120,16}, {104,16}, {88,16}, {72,16}, {56,16}, {40,16}, {24,16}, {4,16}, {4,32}, - {128,0}, {112,0}, {96,0}, {80,0}, {64,0}, {48,0}, {32,0}, {16,0}, {0,0}, - // LB0..LB17 - {144,0}, {160,0}, {176,0}, {192,0}, {216,0}, {224,0}, {240,0}, {240,16}, {240,32}, - {136,16}, {152,16}, {168,16}, {184,16}, {200,16}, {220,16}, {240,48}, {240,64}, {224,64}, - // LC0..LC17 - {96,64}, {100,48}, {84,48}, {68,48}, {52,48}, {36,48}, {255,255}, {48,60}, {28,64}, - {108,32}, {92,32}, {76,32}, {60,32}, {44,32}, {28,32}, {20,44}, {10,48}, {4,64}, - // LD0..LD17 - {124,32}, {140,32}, {156,32}, {172,32}, {188,32}, {214,32}, {180,48}, {202,48}, {224,48}, - {116,48}, {132,48}, {148,48}, {164,48}, {255,255}, {144,60}, {164,64}, {188,64}, {208,64} -}; -const Point g_map_led_to_point_polar[BACKLIGHT_LED_COUNT] PROGMEM = { - // LA0..LA17 - {64,128}, {75,132}, {84,145}, {91,164}, {97,187}, {102,213}, {105,242}, {109,255}, {128,243}, - {61,255}, {67,255}, {72,255}, {77,255}, {82,255}, {86,255}, {90,255}, {93,255}, {96,255}, - // LB0..LB17 - {56,255}, {51,255}, {46,255}, {42,255}, {37,255}, {35,255}, {32,255}, {19,255}, {0,255}, - {53,132}, {44,145}, {37,164}, {31,187}, {26,213}, {22,249}, {237,255}, {224,255}, {221,255}, - // LC0..LC17 - {184,255}, {179,135}, {170,149}, {163,169}, {157,193}, {153,220}, {255,255}, {167,255}, {165,255}, - {128,26}, {128,60}, {128,94}, {128,128}, {128,162}, {128,196}, {145,233}, {148,255}, {161,255}, - // LD0..LD17 - {0,9}, {0,43}, {0,77}, {0,111}, {0,145}, {0,201}, {224,181}, {230,217}, {235,255}, - {189,128}, {200,131}, {210,141}, {218,159}, {255,255}, {201,228}, {206,255}, {213,255}, {218,255} -}; -#elif defined (RGB_BACKLIGHT_KOYU) -const Point g_map_led_to_point[BACKLIGHT_LED_COUNT] PROGMEM = { - // LA0..LA17 - {120,16}, {104,16}, {88,16}, {72,16}, {56,16}, {40,16}, {24,16}, {4,16}, {4,32}, - {128,0}, {112,0}, {96,0}, {80,0}, {64,0}, {48,0}, {32,0}, {16,0}, {0,0}, - // LB0..LB17 - {144,0}, {160,0}, {176,0}, {192,0}, {208,0}, {224,0}, {240,0}, {240,16}, {240,32}, - {136,16}, {152,16}, {168,16}, {184,16}, {200,16}, {220,16}, {240,48}, {240,64}, {224,64}, - // LC0..LC17 - {112,64}, {100,48}, {84,48}, {68,48}, {52,48}, {36,48}, {64,60}, {44,60}, {24,64}, - {108,32}, {92,32}, {76,32}, {60,32}, {44,32}, {28,32}, {255,255}, {10,48}, {4,64}, - // LD0..LD17 - {124,32}, {140,32}, {156,32}, {172,32}, {188,32}, {214,32}, {180,48}, {202,48}, {224,48}, - {116,48}, {132,48}, {148,48}, {164,48}, {255,255}, {160,60}, {180,64}, {208,64}, {255,255} -}; -const Point g_map_led_to_point_polar[BACKLIGHT_LED_COUNT] PROGMEM = { - // LA0..LA17 - {64,128}, {75,132}, {84,145}, {91,164}, {97,187}, {102,213}, {105,242}, {109,255}, {128,243}, - {61,255}, {67,255}, {72,255}, {77,255}, {82,255}, {86,255}, {90,255}, {93,255}, {96,255}, - // LB0..LB17 - {56,255}, {51,255}, {46,255}, {42,255}, {38,255}, {35,255}, {32,255}, {19,255}, {0,255}, - {53,132}, {44,145}, {37,164}, {31,187}, {26,213}, {22,249}, {237,255}, {224,255}, {221,255}, - // LC0..LC17 - {189,255}, {179,135}, {170,149}, {163,169}, {157,193}, {153,220}, {172,252}, {169,255}, {165,255}, - {128,26}, {128,60}, {128,94}, {128,128}, {128,162}, {128,196}, {255,255}, {148,255}, {161,255}, - // LD0..LD17 - {0,9}, {0,43}, {0,77}, {0,111}, {0,145}, {0,201}, {224,181}, {230,217}, {235,255}, - {189,128}, {200,131}, {210,141}, {218,159}, {255,255}, {207,238}, {211,255}, {218,255}, {255,255} -}; -#elif defined (RGB_BACKLIGHT_ZEAL60) || defined (RGB_BACKLIGHT_M60_A) -const Point g_map_led_to_point[BACKLIGHT_LED_COUNT] PROGMEM = { - // LA0..LA17 - {120,16}, {104,16}, {88,16}, {72,16}, {56,16}, {40,16}, {24,16}, {4,16}, {4,32}, - {128,0}, {112,0}, {96,0}, {80,0}, {64,0}, {48,0}, {32,0}, {16,0}, {0,0}, - // LB0..LB17 - {144,0}, {160,0}, {176,0}, {192,0}, {216,0}, {224,0}, {255,255}, {255,255}, {255,255}, - {136,16}, {152,16}, {168,16}, {184,16}, {200,16}, {220,16}, {255,255}, {255,255}, {255,255}, - // LC0..LC17 - {102,64}, {100,48}, {84,48}, {68,48}, {52,48}, {36,48}, {60,64}, {43,64}, {23,64}, - {108,32}, {92,32}, {76,32}, {60,32}, {44,32}, {28,32}, {20,48}, {2,48}, {3,64}, - // LD0..LD17 - {124,32}, {140,32}, {156,32}, {172,32}, {188,32}, {214,32}, {180,48}, {210,48}, {224,48}, - {116,48}, {132,48}, {148,48}, {164,48}, {144,64}, {161,64}, {181,64}, {201,64}, {221,64} -}; -const Point g_map_led_to_point_polar[BACKLIGHT_LED_COUNT] PROGMEM = { - // LA0..LA17 - {58,129}, {70,129}, {80,139}, {89,157}, {96,181}, {101,208}, {105,238}, {109,255}, {128,247}, {58,255}, - {64,255}, {70,255}, {75,255}, {80,255}, {85,255}, {89,255}, {93,255}, {96,255}, - // LB0..LB17 - {53,255}, {48,255}, {43,255}, {39,255}, {34,255}, {32,255}, {255,255}, {255,255}, {255,255}, - {48,139}, {39,157}, {32,181}, {27,208}, {23,238}, {19,255}, {255,255}, {255,255}, {255,255}, - // LC0..LC17 - {188,255}, {183,131}, {173,143}, {165,163}, {159,188}, {154,216}, {172,252}, {170,255}, {165,255}, - {128,9}, {128,46}, {128,82}, {128,119}, {128,155}, {128,192}, {150,244}, {147,255}, {161,255}, - // LD0..LD17 - {0,27}, {0,64}, {0,101}, {0,137}, {0,174}, {255,233}, {228,201}, {235,255}, {237,255}, - {195,128}, {206,136}, {215,152}, {222,175}, {205,234}, {209,255}, {214,255}, {219,255}, {223,255} -}; -#elif defined (RGB_BACKLIGHT_HS60) && defined (HS60_ANSI) -const Point g_map_led_to_point[BACKLIGHT_LED_COUNT] PROGMEM = { - // LA1..LA47 - {0,0}, {4,16}, {6,32}, {10,48}, {16,0}, {24,16}, {28,32}, {36,48}, {32,0}, {40,16}, {44,32}, {52,48}, - {48,0}, {56,16}, {60,32}, {68,48}, {64,0}, {72,16}, {76,32}, {84,48}, {80,0}, {88,16}, {92,32}, {100,48}, - {96,0}, {104,16}, {108,32}, {116,48}, {112,0}, {120,16}, {124,32}, {132,48}, {128,0}, {136,16}, {140,32}, - {148,48}, {144,0}, {152,16}, {156,32}, {164,48}, {160,0}, {168,16}, {172,32}, {180,48}, {176,0}, {184, 16}, {188,32}, - {255,255},// LA48 does not exist, dummy - // LA49..LA50 - {192,0}, {200,16}, - {255,255},// LA51 does not exit, dummy - // LA52..LA60 - {210,48}, {216,0}, {220,16}, {214,32}, {222,64}, {2,64}, {22,64}, {42,64}, {102,64}, - {255,255},// LA61 does not exit, dummy - {162,64}, {182,64}, {202,64} -}; -const Point g_map_led_to_point_polar[BACKLIGHT_LED_COUNT] PROGMEM = { - // LA1..LA47 - {96,255}, {109,255}, {128,242}, {148,255}, {93,255}, {105,238}, {128,192}, {154,216}, {89,255}, {101,208}, {128,155}, {159,188}, - {85,255}, {96,181}, {128,119}, {165,163}, {81,255}, {89,157}, {128,82}, {173,143}, {75,255}, {81,139}, {128,46}, {183,131}, - {70,255}, {70,129}, {129,9}, {195,128}, {64,255}, {58,129}, {255,27}, {206,136}, {58,255}, {47,139}, {255,64}, {215,152}, - {53,255}, {39,157}, {255,101}, {222,175}, {47,255}, {32,181}, {255,137}, {228,201}, {43,255}, {27,208}, {255, 174}, - {255,255},// LA48 does not exist, dummy - // LA49..LA50 - {39,255}, {23,238}, - {255,255},// LA51 does not exit, dummy - // LA52..LA60 - {235,255}, {33,255}, {19,255}, {255,233}, {224,255}, {160,255}, {164,255}, {169,255}, {188,255}, - {255,255},// LA61 does not exit, dummy - {209,255}, {215,255}, {220,255} -}; -#elif defined (RGB_BACKLIGHT_HS60) && defined (HS60_HHKB) -const Point g_map_led_to_point[BACKLIGHT_LED_COUNT] PROGMEM = { - // LA1..LA60 - {0,0}, {4,16}, {6,32}, {10,48}, {16,0}, {24,16}, {28,32}, {36,48}, {32,0}, {40,16}, {44,32}, {52,48}, - {48,0}, {56,16}, {60,32}, {68,48}, {64,0}, {72,16}, {76,32}, {84,48}, {80,0}, {88,16}, {92,32}, {100,48}, - {96,0}, {104,16}, {108,32}, {116,48}, {112,0}, {120,16}, {124,32}, {132,48}, {128,0}, {136,16}, {140,32}, - {148,48}, {144,0}, {152,16}, {156,32}, {164,48}, {160,0}, {168,16}, {172,32}, {180,48}, {176,0}, {184, 16}, {188,32}, - {224,0}, {192,0}, {200,16}, {202,48}, {224,48}, {208,0}, {220,16}, {214,32}, {220,64}, {4,64}, {24,64}, {44,64}, {112,64}, - {255,255}, {255,255}, // LA61..LA62 does not exit, dummy - // LA63..LA64 - {180,64}, {200,64} -}; -const Point g_map_led_to_point_polar[BACKLIGHT_LED_COUNT] PROGMEM = { - // LA1..LA60 - {96,255}, {109,255}, {128,242}, {148,255}, {93,255}, {105,238}, {128,192}, {154,216}, {89,255}, {101,208}, {128,155}, {159,188}, - {85,255}, {96,181}, {128,119}, {165,163}, {81,255}, {89,157}, {128,82}, {173,143}, {75,255}, {81,139}, {128,46}, {183,131}, - {70,255}, {70,129}, {129,9}, {195,128}, {64,255}, {58,129}, {255,27}, {206,136}, {58,255}, {47,139}, {255,64}, {215,152}, - {53,255}, {39,157}, {255,101}, {222,175}, {47,255}, {32,181}, {255,137}, {228,201}, {43,255}, {27,208}, {255, 174}, {32,255}, - {39,255}, {23,238}, {233,242}, {237,255}, {35,255}, {19,255}, {255,233}, {223,255}, {161,255}, {165,255}, {170,255}, {192,255}, - {255,255}, {255,255}, // LA61..LA62 does not exit, dummy - // LA63..LA64 - {214,255}, {219,255} -}; -#elif defined (RGB_BACKLIGHT_HS60) //HS60_ISO -const Point g_map_led_to_point[BACKLIGHT_LED_COUNT] PROGMEM = { - // LA1..LA50 - {0,0}, {4,16}, {6,32}, {2,48}, {16,0}, {24,16}, {28,32}, {36,48}, {32,0}, {40,16}, {44,32}, {52,48}, {48,0}, - {56,16}, {60,32}, {68,48}, {64,0}, {72,16}, {76,32}, {84,48}, {80,0}, {88,16}, {92,32}, {100,48}, {96,0}, {104,16}, - {108,32}, {116,48}, {112,0}, {120,16}, {124,32}, {132,48}, {128,0}, {136,16}, {140,32}, {148,48}, {144,0}, {152,16}, - {156,32}, {164,48}, {160,0}, {168,16}, {172,32}, {180,48}, {176,0}, {184, 16}, {188,32}, {20,48}, {192,0}, {200,16}, - {255,255},// LA51 does not exit, dummy - // LA52..LA60 - {210,48}, {216,0}, {220,16}, {222,24}, {222,64}, {2,64}, {22,64}, {42,64}, {102,64}, - {255,255},// LA61 does not exit, dummy - {162,64}, {182,64}, {202,64} -}; -const Point g_map_led_to_point_polar[BACKLIGHT_LED_COUNT] PROGMEM = { - // LA1..LA50 - {96,255}, {109,255}, {128,242}, {147,255}, {93,255}, {105,238}, {128,192}, {154,216}, {89,255}, {101,208}, {128,155}, {159,188}, {85,255}, - {96,181}, {128,119}, {165,163}, {81,255}, {89,157}, {128,82}, {173,143}, {75,255}, {81,139}, {128,46}, {183,131}, {70,255}, {70,129}, - {129,9}, {195,128}, {64,255}, {58,129}, {255,27}, {206,136}, {58,255}, {47,139}, {255,64}, {215,152}, {53,255}, {39,157}, {255,101}, - {222,175}, {47,255}, {32,181}, {255,137}, {228,201}, {43,255}, {27,208}, {255, 174}, {150,246}, {39,255}, {23,238}, - {255,255},// LA51 does not exit, dummy - // LA52..LA60 - {235,255}, {33,255}, {19,255}, {10,255}, {224,255}, {160,255}, {164,255}, {169,255}, {188,255}, - {255,255},// LA61 does not exit, dummy - {209,255}, {215,255}, {220,255} -}; -#elif defined (RGB_BACKLIGHT_M6_B) -// M6-B is really simple: -// 0 3 5 -// 1 2 4 -const Point g_map_led_to_point[BACKLIGHT_LED_COUNT] PROGMEM = { - {0,0}, {0,16}, {16,16}, {16,0}, {32,16}, {32,0} -}; -const Point g_map_led_to_point_polar[BACKLIGHT_LED_COUNT] PROGMEM = { - {160,255}, {96,255}, {77,255}, {179,255}, {51,255}, {205,255} -}; -#endif - -// This may seem counter-intuitive, but it's quite flexible. -// For each LED, get it's position to decide what color to make it. -// This solves the issue of LEDs (and switches) not aligning to a grid, -// or having a large "bitmap" and sampling them. -void map_led_to_point( uint8_t index, Point *point ) -{ - // Slightly messy way to get Point structs out of progmem. - uint8_t *addr = (uint8_t*)&g_map_led_to_point[index]; - point->x = pgm_read_byte(addr); - point->y = pgm_read_byte(addr+1); - -#if defined (RGB_BACKLIGHT_M6_B) - return; -#endif - - switch (index) - { - case 18+4: // LB4A - if ( g_config.use_split_backspace ) - point->x -= 8; - break; -#if defined (RGB_BACKLIGHT_ZEAL60) - case 18+14: // LB14A - if ( g_config.use_iso_enter ) - point->y += 8; // extremely pedantic - break; - case 54+5: // LD5A - if ( !g_config.use_iso_enter ) - point->x -= 10; - break; - case 36+16: // LC16A - if ( !g_config.use_split_left_shift ) - point->x += 8; - break; -#endif -#if defined (RGB_BACKLIGHT_ZEAL60) || defined (RGB_BACKLIGHT_M60_A) - case 36+0: // LC0A - if ( g_config.use_7u_spacebar ) - point->x += 10; - break; - case 36+6: // LC6A - if ( g_config.use_7u_spacebar ) - point->x += 4; - break; - case 54+7: // LD7A - if ( !g_config.use_split_right_shift ) - point->x -= 8; - break; -#endif - } -} - -void map_led_to_point_polar( uint8_t index, Point *point ) -{ - // Slightly messy way to get Point structs out of progmem. - uint8_t *addr = (uint8_t*)&g_map_led_to_point_polar[index]; - point->x = pgm_read_byte(addr); - point->y = pgm_read_byte(addr+1); -} - -// -// Maps switch matrix coordinate (row,col) to LED index -// - - -#if defined (RGB_BACKLIGHT_ZEAL65) -// Note: Left spacebar stab is at 4,2 (LC7) -// Right spacebar stab is at 4,9 (D14) -// -// A17, A16, A15, A14, A13, A12, A11, A10, A9, B0, B1, B2, B3, B4, B6 -// A7, A6, A5, A4, A3, A2, A1, A0, B9, B10, B11, B12, B13, B14, B7 -// A8, C14, C13, C12, C11, C10, C9, D0, D1, D2, D3, D4, D5, B5, B8 -// C16, C15, C5, C4, C3, C2, C1, D9, D10, D11, D12, D6, D7, D8, B15 -// C17, C8, C7, ---, ---, ---, ---, C0, ---, D14, D15, D16, D17, B17, B16 -const uint8_t g_map_row_column_to_led[MATRIX_ROWS][MATRIX_COLS] PROGMEM = { - { 0+17, 0+16, 0+15, 0+14, 0+13, 0+12, 0+11, 0+10, 0+9, 18+0, 18+1, 18+2, 18+3, 18+4, 18+6 }, - { 0+7, 0+6, 0+5, 0+4, 0+3, 0+2, 0+1, 0+0, 18+9, 18+10, 18+11, 18+12, 18+13, 18+14, 18+7 }, - { 0+8, 36+14, 36+13, 36+12, 36+11, 36+10, 36+9, 54+0, 54+1, 54+2, 54+3, 54+4, 54+5, 18+5, 18+8 }, - { 36+16, 36+15, 36+5, 36+4, 36+3, 36+2, 36+1, 54+9, 54+10, 54+11, 54+12, 54+6, 54+7, 54+8, 18+15 }, - { 36+17, 36+8, 36+7, 255, 255, 255, 255, 36+0, 255, 54+14, 54+15, 54+16, 54+17, 18+17, 18+16 } -}; -#elif defined(RGB_BACKLIGHT_KOYU) -// Note: Left spacebar stab is at 4,4 (LC6) -// Right spacebar stab is at 4,10 (D14) -// -// A17, A16, A15, A14, A13, A12, A11, A10, A9, B0, B1, B2, B3, B4, B6 -// A7, A6, A5, A4, A3, A2, A1, A0, B9, B10, B11, B12, B13, B14, B7 -// A8, C14, C13, C12, C11, C10, C9, D0, D1, D2, D3, D4, D5, B5, B8 -// C16, C15, C5, C4, C3, C2, C1, D9, D10, D11, D12, D6, D7, D8, B15 -// C17, C8, C7, C6, ---, ---, ---, C0, ---, ---, D14, D15, D16, B17, B16 -const uint8_t g_map_row_column_to_led[MATRIX_ROWS][MATRIX_COLS] PROGMEM = { - { 0+17, 0+16, 0+15, 0+14, 0+13, 0+12, 0+11, 0+10, 0+9, 18+0, 18+1, 18+2, 18+3, 18+4, 18+6 }, - { 0+7, 0+6, 0+5, 0+4, 0+3, 0+2, 0+1, 0+0, 18+9, 18+10, 18+11, 18+12, 18+13, 18+14, 18+7 }, - { 0+8, 36+14, 36+13, 36+12, 36+11, 36+10, 36+9, 54+0, 54+1, 54+2, 54+3, 54+4, 54+5, 18+5, 18+8 }, - { 36+16, 36+15, 36+5, 36+4, 36+3, 36+2, 36+1, 54+9, 54+10, 54+11, 54+12, 54+6, 54+7, 54+8, 18+15 }, - { 36+17, 36+8, 36+7, 36+6, 255, 255, 255, 36+0, 255, 255, 54+14, 54+15, 54+16, 18+17, 18+16 } -}; -#elif defined (RGB_BACKLIGHT_ZEAL60) || defined (RGB_BACKLIGHT_M60_A) -// Note: Left spacebar stab is at 4,3 (LC6) -// Right spacebar stab is at 4,9 (LD13) or 4,10 (LD14) -// -// A17, A16, A15, A14, A13, A12, A11, A10, A9, B0, B1, B2, B3, B4, -// A7, A6, A5, A4, A3, A2, A1, A0, B9, B10, B11, B12, B13, B14, -// A8, C14, C13, C12, C11, C10, C9, D0, D1, D2, D3, D4, D5, B5, -// C16, C15, C5, C4, C3, C2, C1, D9, D10, D11, D12, D6, D7, D8, -// C17, C8, C7, C6, ---, ---, ---, C0, ---, D13, D14, D15, D16, D17, -const uint8_t g_map_row_column_to_led[MATRIX_ROWS][MATRIX_COLS] PROGMEM = { - { 0+17, 0+16, 0+15, 0+14, 0+13, 0+12, 0+11, 0+10, 0+9, 18+0, 18+1, 18+2, 18+3, 18+4 }, - { 0+7, 0+6, 0+5, 0+4, 0+3, 0+2, 0+1, 0+0, 18+9, 18+10, 18+11, 18+12, 18+13, 18+14 }, - { 0+8, 36+14, 36+13, 36+12, 36+11, 36+10, 36+9, 54+0, 54+1, 54+2, 54+3, 54+4, 54+5, 18+5 }, - { 36+16, 36+15, 36+5, 36+4, 36+3, 36+2, 36+1, 54+9, 54+10, 54+11, 54+12, 54+6, 54+7, 54+8 }, - { 36+17, 36+8, 36+7, 36+6, 255, 255, 255, 36+0, 255, 54+13, 54+14, 54+15, 54+16, 54+17 } -}; -#elif defined (RGB_BACKLIGHT_HS60) && defined (HS60_ANSI) -// -// LA1, LA5, LA9, LA13, LA17, LA21, LA25, LA29, LA33, LA37, LA41, LA45, LA49, LA53, -// LA2, LA6, LA10, LA14, LA18, LA22, LA26, LA30, LA34, LA38, LA42, LA46, LA50, ---, -// LA3, LA7, LA11, LA15, LA19, LA23, LA27, LA31, LA35, LA39, LA43, LA47, LA54, LA55, -// LA4, ---, LA8, LA12, LA16, LA20, LA24, LA28, LA32, LA36, LA40, LA44, ---, LA52, -// LA57, LA58, LA59, ---, ---, ---, LA60, ---, ---, ---, LA62, LA63, LA64, LA56 -const uint8_t g_map_row_column_to_led[MATRIX_ROWS][MATRIX_COLS] PROGMEM = { - { 1-1, 5-1, 9-1, 13-1, 17-1, 21-1, 25-1, 29-1, 33-1, 37-1, 41-1, 45-1, 49-1, 53-1 }, - { 2-1, 6-1, 10-1, 14-1, 18-1, 22-1, 26-1, 30-1, 34-1, 38-1, 42-1, 46-1, 50-1, 255 }, - { 3-1, 7-1, 11-1, 15-1, 19-1, 23-1, 27-1, 31-1, 35-1, 39-1, 43-1, 47-1, 54-1, 55-1 }, - { 4-1, 255, 8-1, 12-1, 16-1, 20-1, 24-1, 28-1, 32-1, 36-1, 40-1, 44-1, 255, 52-1 }, - { 57-1, 58-1, 59-1, 255, 255, 255, 60-1, 255, 255, 255, 62-1, 63-1, 64-1, 56-1 } -}; -#elif defined (RGB_BACKLIGHT_HS60) && defined (HS60_HHKB) -// -// LA1, LA5, LA9, LA13, LA17, LA21, LA25, LA29, LA33, LA37, LA41, LA45, LA49, LA53, -// LA2, LA6, LA10, LA14, LA18, LA22, LA26, LA30, LA34, LA38, LA42, LA46, LA50, LA48, -// LA3, LA7, LA11, LA15, LA19, LA23, LA27, LA31, LA35, LA39, LA43, LA47, LA54, LA55, -// LA4, ---, LA8, LA12, LA16, LA20, LA24, LA28, LA32, LA36, LA40, LA44, LA51, LA52, -// LA57, LA58, LA59, ---, ---, ---, LA60, ---, ---, ---, ---, LA63, LA64, LA56 -const uint8_t g_map_row_column_to_led[MATRIX_ROWS][MATRIX_COLS] PROGMEM = { - { 1-1, 5-1, 9-1, 13-1, 17-1, 21-1, 25-1, 29-1, 33-1, 37-1, 41-1, 45-1, 49-1, 53-1 }, - { 2-1, 6-1, 10-1, 14-1, 18-1, 22-1, 26-1, 30-1, 34-1, 38-1, 42-1, 46-1, 50-1, 48-1 }, - { 3-1, 7-1, 11-1, 15-1, 19-1, 23-1, 27-1, 31-1, 35-1, 39-1, 43-1, 47-1, 54-1, 55-1 }, - { 4-1, 255, 8-1, 12-1, 16-1, 20-1, 24-1, 28-1, 32-1, 36-1, 40-1, 44-1, 51-1, 52-1 }, - { 57-1, 58-1, 59-1, 255, 255, 255, 60-1, 255, 255, 255, 255, 63-1, 64-1, 56-1 } -}; -#elif defined (RGB_BACKLIGHT_HS60) //HS60_ISO -// -// LA1, LA5, LA9, LA13, LA17, LA21, LA25, LA29, LA33, LA37, LA41, LA45, LA49, LA53, -// LA2, LA6, LA10, LA14, LA18, LA22, LA26, LA30, LA34, LA38, LA42, LA46, LA50, ---, -// LA3, LA7, LA11, LA15, LA19, LA23, LA27, LA31, LA35, LA39, LA43, LA47, LA54, LA55, -// LA4, LA48, LA8, LA12, LA16, LA20, LA24, LA28, LA32, LA36, LA40, LA44, ---, LA52, -// LA57, LA58, LA59, ---, ---, ---, LA60, ---, ---, ---, LA62, LA63, LA64, LA56 -const uint8_t g_map_row_column_to_led[MATRIX_ROWS][MATRIX_COLS] PROGMEM = { - { 1-1, 5-1, 9-1, 13-1, 17-1, 21-1, 25-1, 29-1, 33-1, 37-1, 41-1, 45-1, 49-1, 53-1 }, - { 2-1, 6-1, 10-1, 14-1, 18-1, 22-1, 26-1, 30-1, 34-1, 38-1, 42-1, 46-1, 50-1, 255 }, - { 3-1, 7-1, 11-1, 15-1, 19-1, 23-1, 27-1, 31-1, 35-1, 39-1, 43-1, 47-1, 54-1, 55-1 }, - { 4-1, 48-1, 8-1, 12-1, 16-1, 20-1, 24-1, 28-1, 32-1, 36-1, 40-1, 44-1, 255, 52-1 }, - { 57-1, 58-1, 59-1, 255, 255, 255, 60-1, 255, 255, 255, 62-1, 63-1, 64-1, 56-1 } -}; -#elif defined (RGB_BACKLIGHT_M6_B) -// M6-B is really simple: -// 0 3 5 -// 1 2 4 -const uint8_t g_map_row_column_to_led[MATRIX_ROWS][MATRIX_COLS] PROGMEM = { - { 0, 3, 5, 1, 2, 4 } -}; -#endif - -void map_row_column_to_led( uint8_t row, uint8_t column, uint8_t *led ) -{ - *led = 255; - if ( row < MATRIX_ROWS && column < MATRIX_COLS ) - { - *led = pgm_read_byte(&g_map_row_column_to_led[row][column]); - } -} - -void backlight_update_pwm_buffers(void) -{ -#if defined (RGB_BACKLIGHT_M6_B) - IS31FL3218_update_pwm_buffers(); -#elif defined (RGB_BACKLIGHT_HS60) - IS31FL3733_update_pwm_buffers( ISSI_ADDR_1, ISSI_ADDR_2 ); - IS31FL3733_update_led_control_registers( ISSI_ADDR_1, ISSI_ADDR_2 ); -#else - IS31FL3731_update_pwm_buffers( ISSI_ADDR_1, ISSI_ADDR_2 ); - IS31FL3731_update_led_control_registers( ISSI_ADDR_1, ISSI_ADDR_2 ); -#endif -} - -void backlight_set_color( int index, uint8_t red, uint8_t green, uint8_t blue ) -{ -#if defined (RGB_BACKLIGHT_M6_B) - IS31FL3218_set_color( index, red, green, blue ); -#elif defined (RGB_BACKLIGHT_HS60) - IS31FL3733_set_color( index, red, green, blue ); -#else - IS31FL3731_set_color( index, red, green, blue ); -#endif -} - -void backlight_set_color_all( uint8_t red, uint8_t green, uint8_t blue ) -{ -#if defined (RGB_BACKLIGHT_M6_B) - IS31FL3218_set_color_all( red, green, blue ); -#elif defined (RGB_BACKLIGHT_HS60) - IS31FL3733_set_color_all( red, green, blue ); -#else - IS31FL3731_set_color_all( red, green, blue ); -#endif -} - -void backlight_set_key_hit(uint8_t row, uint8_t column) -{ - uint8_t led; - map_row_column_to_led(row,column,&led); - g_key_hit[led] = 0; - - g_any_key_hit = 0; -} - -#if !defined(RGB_BACKLIGHT_HS60) -// This is (F_CPU/1024) / 20 Hz -// = 15625 Hz / 20 Hz -// = 781 -#define TIMER3_TOP 781 - -void backlight_timer_init(void) -{ - static uint8_t backlight_timer_is_init = 0; - if ( backlight_timer_is_init ) - { - return; - } - backlight_timer_is_init = 1; - - // Timer 3 setup - TCCR3B = _BV(WGM32) | // CTC mode OCR3A as TOP - _BV(CS32) | _BV(CS30); // prescale by /1024 - // Set TOP value - uint8_t sreg = SREG; - cli(); - - OCR3AH = (TIMER3_TOP >> 8) & 0xff; - OCR3AL = TIMER3_TOP & 0xff; - SREG = sreg; -} - -void backlight_timer_enable(void) -{ - TIMSK3 |= _BV(OCIE3A); -} - -void backlight_timer_disable(void) -{ - TIMSK3 &= ~_BV(OCIE3A); -} -#else //STM32, use GPT with TIM4. Enable in halconf.h -static void gpt_backlight_timer_task(GPTDriver *gptp); -// Timer setup at 200Khz, callback at 10k ticks = 20Hz -static GPTConfig gpt4cfg1 = { - .frequency = 200000U, - .callback = gpt_backlight_timer_task -}; - -void backlight_timer_init(void) -{ - gptStart(&GPTD4, &gpt4cfg1); -} - -void backlight_timer_enable(void) -{ - gptStartContinuous(&GPTD4, 10000); -} - -void backlight_timer_disable(void) -{ - gptStopTimer(&GPTD4); -} -#endif //!defined(RGB_BACKLIGHT_HS60) - -void backlight_set_suspend_state(bool state) -{ - g_suspend_state = state; -} - -void backlight_set_indicator_state(uint8_t state) -{ - g_indicator_state = state; -} - -void backlight_effect_rgb_test(void) -{ - // Mask out bits 4 and 5 - // This 2-bit value will stay the same for 16 ticks. - switch ( (g_tick & 0x30) >> 4 ) - { - case 0: - { - backlight_set_color_all( 255, 0, 0 ); - break; - } - case 1: - { - backlight_set_color_all( 0, 255, 0 ); - break; - } - case 2: - { - backlight_set_color_all( 0, 0, 255 ); - break; - } - case 3: - { - backlight_set_color_all( 255, 255, 255 ); - break; - } - } -} - -#if defined(RGB_DEBUGGING_ONLY) -// This tests the LEDs -// Note that it will change the LED control registers -// in the LED drivers, and leave them in an invalid -// state for other backlight effects. -// ONLY USE THIS FOR TESTING LEDS! -void backlight_effect_single_LED_test(void) -{ - static uint8_t color = 0; // 0,1,2 for R,G,B - static uint8_t row = 0; - static uint8_t column = 0; - - static uint8_t tick = 0; - tick++; - - if ( tick > 2 ) - { - tick = 0; - column++; - } - if ( column > 14 ) - { - column = 0; - row++; - } - if ( row > 4 ) - { - row = 0; - color++; - } - if ( color > 2 ) - { - color = 0; - } - - uint8_t led; - map_row_column_to_led( row, column, &led ); - backlight_set_color_all( 255, 255, 255 ); - backlight_test_led( led, color==0, color==1, color==2 ); -} -#endif // defined(RGB_DEBUGGING_ONLY) - -// All LEDs off -void backlight_effect_all_off(void) -{ - backlight_set_color_all( 0, 0, 0 ); -} - -// Solid color -void backlight_effect_solid_color(void) -{ - HSV hsv = { .h = g_config.color_1.h, .s = g_config.color_1.s, .v = g_config.brightness }; - RGB rgb = hsv_to_rgb( hsv ); - backlight_set_color_all( rgb.r, rgb.g, rgb.b ); -} - -// alphas = color1, mods = color2 -void backlight_effect_alphas_mods(void) -{ - RGB rgb1 = hsv_to_rgb( (HSV){ .h = g_config.color_1.h, .s = g_config.color_1.s, .v = g_config.brightness } ); - RGB rgb2 = hsv_to_rgb( (HSV){ .h = g_config.color_2.h, .s = g_config.color_2.s, .v = g_config.brightness } ); - - for ( int row = 0; row < MATRIX_ROWS; row++ ) - { - for ( int column = 0; column < MATRIX_COLS; column++ ) - { - uint8_t index; - map_row_column_to_led( row, column, &index ); - if ( index < BACKLIGHT_LED_COUNT ) - { - if ( ( g_config.alphas_mods[row] & (1< 127 ) - { - deltaH -= 256; - } - else if ( deltaH < -127 ) - { - deltaH += 256; - } - // Divide delta by 4, this gives the delta per row - deltaH /= 4; - - int16_t s1 = g_config.color_1.s; - int16_t s2 = g_config.color_2.s; - int16_t deltaS = ( s2 - s1 ) / 4; - - HSV hsv = { .h = 0, .s = 255, .v = g_config.brightness }; - RGB rgb; - Point point; - for ( int i=0; i>4); - // Relies on hue being 8-bit and wrapping - hsv.h = g_config.color_1.h + ( deltaH * y ); - hsv.s = g_config.color_1.s + ( deltaS * y ); - rgb = hsv_to_rgb( hsv ); - backlight_set_color( i, rgb.r, rgb.g, rgb.b ); - } -} - -void backlight_effect_raindrops(bool initialize) -{ - int16_t h1 = g_config.color_1.h; - int16_t h2 = g_config.color_2.h; - int16_t deltaH = h2 - h1; - deltaH /= 4; - - // Take the shortest path between hues - if ( deltaH > 127 ) - { - deltaH -= 256; - } - else if ( deltaH < -127 ) - { - deltaH += 256; - } - - int16_t s1 = g_config.color_1.s; - int16_t s2 = g_config.color_2.s; - int16_t deltaS = ( s2 - s1 ) / 4; - - HSV hsv; - RGB rgb; - - // Change one LED every tick - uint8_t led_to_change = ( g_tick & 0x000 ) == 0 ? rand() % BACKLIGHT_LED_COUNT : 255; - - for ( int i=0; i> 2; - hsv.h = g_config.color_1.h + offset2; - hsv.s = 127 + ( point.y >> 1 ); - rgb = hsv_to_rgb( hsv ); - backlight_set_color( i, rgb.r, rgb.g, rgb.b ); - } -} - -#if defined(RGB_BACKLIGHT_M6_B) -void backlight_effect_custom_colors(void) -{ - RGB rgb; - for ( uint8_t i = 0; i < 6; i++ ) - { - HSV hsv = { .h = g_config.custom_color[i].h, .s = g_config.custom_color[i].s, .v = g_config.brightness }; - rgb = hsv_to_rgb( hsv ); - uint8_t led; - map_row_column_to_led( 0, i, &led ); - backlight_set_color( led, rgb.r, rgb.g, rgb.b ); - } -} -#endif - -void backlight_effect_indicators_set_colors( uint8_t index, HS color ) -{ - HSV hsv = { .h = color.h, .s = color.s, .v = g_config.brightness }; - RGB rgb = hsv_to_rgb( hsv ); - if ( index == 254 ) - { - backlight_set_color_all( rgb.r, rgb.g, rgb.b ); - } - else - { - backlight_set_color( index, rgb.r, rgb.g, rgb.b ); - - // If the spacebar LED is the indicator, - // do the same for the spacebar stabilizers - if ( index == 36+0 ) // LC0 - { -#if defined (RGB_BACKLIGHT_ZEAL65) - backlight_set_color( 36+7, rgb.r, rgb.g, rgb.b ); // LC7 - backlight_set_color( 54+14, rgb.r, rgb.g, rgb.b ); // LD14 -#elif defined (RGB_BACKLIGHT_KOYU) - backlight_set_color( 36+6, rgb.r, rgb.g, rgb.b ); // LC6 - backlight_set_color( 54+14, rgb.r, rgb.g, rgb.b ); // LD14 -#elif defined (RGB_BACKLIGHT_ZEAL60) || defined (RGB_BACKLIGHT_M60_A) - backlight_set_color( 36+6, rgb.r, rgb.g, rgb.b ); // LC6 - backlight_set_color( 54+13, rgb.r, rgb.g, rgb.b ); // LD13 - if ( g_config.use_7u_spacebar ) - { - backlight_set_color( 54+14, rgb.r, rgb.g, rgb.b ); // LD14 - } -#endif - } - } -} - -// This runs after another backlight effect and replaces -// colors already set -void backlight_effect_indicators(void) -{ - if ( g_config.caps_lock_indicator.index != 255 && - ( g_indicator_state & (1< 0 && g_any_key_hit > g_config.disable_after_timeout * 60 * 20)); - uint8_t effect = suspend_backlight ? 0 : g_config.effect; - - // Keep track of the effect used last time, - // detect change in effect, so each effect can - // have an optional initialization. - static uint8_t effect_last = 255; - bool initialize = effect != effect_last; - effect_last = effect; - - // this gets ticked at 20 Hz. - // each effect can opt to do calculations - // and/or request PWM buffer updates. - switch ( effect ) - { - case 0: - backlight_effect_all_off(); - break; - case 1: - backlight_effect_solid_color(); - break; - case 2: -#if defined(RGB_BACKLIGHT_M6_B) - backlight_effect_custom_colors(); -#else - backlight_effect_alphas_mods(); -#endif - break; - case 3: - backlight_effect_gradient_up_down(); - break; - case 4: - backlight_effect_raindrops( initialize ); - break; - case 5: - backlight_effect_cycle_all(); - break; - case 6: - backlight_effect_cycle_left_right(); - break; - case 7: - backlight_effect_cycle_up_down(); - break; - case 8: - backlight_effect_jellybean_raindrops( initialize ); - break; - case 9: - backlight_effect_cycle_radial1(); - break; - case 10: - backlight_effect_cycle_radial2(); - break; - default: - backlight_effect_all_off(); - break; - } - - if ( ! suspend_backlight ) - { -#if !defined(RGB_BACKLIGHT_M6_B) - backlight_effect_indicators(); -#endif - } -} - -void backlight_set_indicator_index( uint8_t *index, uint8_t row, uint8_t column ) -{ - if ( row >= MATRIX_ROWS ) - { - // Special value, 255=none, 254=all - *index = row; - } - else - { - map_row_column_to_led( row, column, index ); - } -} - -void backlight_get_indicator_row_col( uint8_t index, uint8_t *row, uint8_t *column ) -{ - if ( index == 255 || index == 254 ) - { - // Special value, 255=none, 254=all - *row = index; - *column = 0; - return; - } - for ( uint8_t r = 0; r < MATRIX_ROWS; r++ ) - { - for ( uint8_t c = 0; c < MATRIX_COLS; c++ ) - { - uint8_t i = 255; - map_row_column_to_led( r, c, &i ); - if ( i == index ) - { - *row = r; - *column = c; - return; - } - } - } -} - -// Some helpers for setting/getting HSV -void _set_color( HS *color, uint8_t *data ) -{ - color->h = data[0]; - color->s = data[1]; -} - -void _get_color( HS *color, uint8_t *data ) -{ - data[0] = color->h; - data[1] = color->s; -} - -void backlight_config_set_value( uint8_t *data ) -{ - bool reinitialize = false; - uint8_t *value_id = &(data[0]); - uint8_t *value_data = &(data[1]); - switch ( *value_id ) - { -#if defined (RGB_BACKLIGHT_ZEAL60) || defined(RGB_BACKLIGHT_ZEAL65) - case id_use_split_backspace: - { - g_config.use_split_backspace = (bool)*value_data; - reinitialize = true; - break; - } -#endif -#if defined (RGB_BACKLIGHT_ZEAL60) - case id_use_split_left_shift: - { - g_config.use_split_left_shift = (bool)*value_data; - reinitialize = true; - break; - } - case id_use_split_right_shift: - { - g_config.use_split_right_shift = (bool)*value_data; - reinitialize = true; - break; - } - case id_use_7u_spacebar: - { - g_config.use_7u_spacebar = (bool)*value_data; - reinitialize = true; - break; - } - case id_use_iso_enter: - { - g_config.use_iso_enter = (bool)*value_data; - reinitialize = true; - break; - } - case id_disable_hhkb_blocker_leds: - { - g_config.disable_hhkb_blocker_leds = (bool)*value_data; - reinitialize = true; - break; - } -#endif - case id_disable_when_usb_suspended: - { - g_config.disable_when_usb_suspended = (bool)*value_data; - break; - } - case id_disable_after_timeout: - { - g_config.disable_after_timeout = *value_data; - break; - } - case id_brightness: - { - g_config.brightness = *value_data; - break; - } - case id_effect: - { - g_config.effect = *value_data; - break; - } - case id_effect_speed: - { - g_config.effect_speed = *value_data; - break; - } - case id_color_1: - { - _set_color( &(g_config.color_1), value_data ); - break; - } - case id_color_2: - { - _set_color( &(g_config.color_2), value_data ); - break; - } - case id_caps_lock_indicator_color: - { - _set_color( &(g_config.caps_lock_indicator.color), value_data ); - break; - } - case id_caps_lock_indicator_row_col: - { - backlight_set_indicator_index( &(g_config.caps_lock_indicator.index), value_data[0], value_data[1] ); - break; - } - case id_layer_1_indicator_color: - { - _set_color( &(g_config.layer_1_indicator.color), value_data ); - break; - } - case id_layer_1_indicator_row_col: - { - backlight_set_indicator_index( &(g_config.layer_1_indicator.index), value_data[0], value_data[1] ); - break; - } - case id_layer_2_indicator_color: - { - _set_color( &(g_config.layer_2_indicator.color), value_data ); - break; - } - case id_layer_2_indicator_row_col: - { - backlight_set_indicator_index( &(g_config.layer_2_indicator.index), value_data[0], value_data[1] ); - break; - } - case id_layer_3_indicator_color: - { - _set_color( &(g_config.layer_3_indicator.color), value_data ); - break; - } - case id_layer_3_indicator_row_col: - { - backlight_set_indicator_index( &(g_config.layer_3_indicator.index), value_data[0], value_data[1] ); - break; - } - case id_alphas_mods: - { - for ( int i=0; i<5; i++ ) - { - g_config.alphas_mods[i] = ( *(value_data+i*2) << 8 ) | ( *(value_data+i*2+1) ); - } - } -#if defined(RGB_BACKLIGHT_M6_B) - case id_custom_color: - { - uint8_t index = value_data[0]; - if ( index >= 0 && index <= 6 ) - { - _set_color( &(g_config.custom_color[index]), &(value_data[1]) ); - } - } -#endif - } - - if ( reinitialize ) - { - backlight_init_drivers(); - } -} - -void backlight_config_get_value( uint8_t *data ) -{ - uint8_t *value_id = &(data[0]); - uint8_t *value_data = &(data[1]); - switch ( *value_id ) - { - case id_use_split_backspace: - { - *value_data = ( g_config.use_split_backspace ? 1 : 0 ); - break; - } - case id_use_split_left_shift: - { - *value_data = ( g_config.use_split_left_shift ? 1 : 0 ); - break; - } - case id_use_split_right_shift: - { - *value_data = ( g_config.use_split_right_shift ? 1 : 0 ); - break; - } - case id_use_7u_spacebar: - { - *value_data = ( g_config.use_7u_spacebar ? 1 : 0 ); - break; - } - case id_use_iso_enter: - { - *value_data = ( g_config.use_iso_enter ? 1 : 0 ); - break; - } - case id_disable_when_usb_suspended: - { - *value_data = ( g_config.disable_when_usb_suspended ? 1 : 0 ); - break; - } - case id_disable_hhkb_blocker_leds: - { - *value_data = ( g_config.disable_hhkb_blocker_leds ? 1 : 0 ); - break; - } - case id_disable_after_timeout: - { - *value_data = g_config.disable_after_timeout; - break; - } - case id_brightness: - { - *value_data = g_config.brightness; - break; - } - case id_effect: - { - *value_data = g_config.effect; - break; - } - case id_effect_speed: - { - *value_data = g_config.effect_speed; - break; - } - case id_color_1: - { - _get_color( &(g_config.color_1), value_data ); - break; - } - case id_color_2: - { - _get_color( &(g_config.color_2), value_data ); - break; - } - case id_caps_lock_indicator_color: - { - _get_color( &(g_config.caps_lock_indicator.color), value_data ); - break; - } - case id_caps_lock_indicator_row_col: - { - backlight_get_indicator_row_col( g_config.caps_lock_indicator.index, &(value_data[0]), &(value_data[1]) ); - break; - } - case id_layer_1_indicator_color: - { - _get_color( &(g_config.layer_1_indicator.color), value_data ); - break; - } - case id_layer_1_indicator_row_col: - { - backlight_get_indicator_row_col( g_config.layer_1_indicator.index, &(value_data[0]), &(value_data[1]) ); - break; - } - case id_layer_2_indicator_color: - { - _get_color( &(g_config.layer_2_indicator.color), value_data ); - break; - } - case id_layer_2_indicator_row_col: - { - backlight_get_indicator_row_col( g_config.layer_2_indicator.index, &(value_data[0]), &(value_data[1]) ); - break; - } - case id_layer_3_indicator_color: - { - _get_color( &(g_config.layer_3_indicator.color), value_data ); - break; - } - case id_layer_3_indicator_row_col: - { - backlight_get_indicator_row_col( g_config.layer_3_indicator.index, &(value_data[0]), &(value_data[1]) ); - break; - } - case id_alphas_mods: - { - for ( int i=0; i<5; i++ ) - { - *(value_data+i*2) = g_config.alphas_mods[i] >> 8; - *(value_data+i*2+1) = g_config.alphas_mods[i] & 0xFF; - } - } -#if defined(RGB_BACKLIGHT_M6_B) - case id_custom_color: - { - uint8_t index = value_data[0]; - if ( index >= 0 && index <= 6 ) - { - _get_color( &(g_config.custom_color[index]), &(value_data[1]) ); - } - } -#endif - } -} - -void backlight_config_set_alphas_mods( uint16_t *alphas_mods ) -{ - for ( int i=0; i<5; i++ ) - { - g_config.alphas_mods[i] = alphas_mods[i]; - } - - backlight_config_save(); -} - -void backlight_config_load(void) -{ - eeprom_read_block( &g_config, ((void*)RGB_BACKLIGHT_CONFIG_EEPROM_ADDR), sizeof(backlight_config) ); -} - -void backlight_config_save(void) -{ - eeprom_update_block( &g_config, ((void*)RGB_BACKLIGHT_CONFIG_EEPROM_ADDR), sizeof(backlight_config) ); -} - -void backlight_init_drivers(void) -{ - // Initialize I2C - i2c_init(); - -#if defined(RGB_BACKLIGHT_M6_B) - IS31FL3218_init(); -#elif defined(RGB_BACKLIGHT_HS60) - IS31FL3733_init( ISSI_ADDR_1 ); - - for ( int index = 0; index < BACKLIGHT_LED_COUNT; index++ ) - { -#if defined (HS60_ANSI) - bool enabled = !( ( index == 48-1 ) || //LA48 - ( index == 51-1 ) || //LA51 - ( index == 61-1 ) ); //LA61 -#elif defined (HS60_HHKB) - bool enabled = !( ( index == 61-1 ) || //LA61 - ( index == 62-1 ) ); //LA62 -#else //HS60_ISO - bool enabled = !( ( index == 51-1 ) || //LA51 - ( index == 61-1 ) ); //LA61 -#endif - // This only caches it for later - IS31FL3733_set_led_control_register( index, enabled, enabled, enabled ); - } - // This actually updates the LED drivers - IS31FL3733_update_led_control_registers( ISSI_ADDR_1, ISSI_ADDR_2 ); -#else - IS31FL3731_init( ISSI_ADDR_1 ); - IS31FL3731_init( ISSI_ADDR_2 ); - - for ( int index = 0; index < BACKLIGHT_LED_COUNT; index++ ) - { - // OR the possible "disabled" cases together, then NOT the result to get the enabled state - // LC6 LD13 not present on Zeal65 -#if defined (RGB_BACKLIGHT_ZEAL65) - bool enabled = !( ( index == 18+5 && !g_config.use_split_backspace ) || // LB5 - ( index == 36+6 ) || // LC6 - ( index == 54+13 ) ); // LD13 -#elif defined (RGB_BACKLIGHT_KOYU) - bool enabled = !( ( index == 36+15 ) || // LC15 - ( index == 54+13 ) || // LD13 - ( index == 54+17 ) ); // LD17 -#elif defined (RGB_BACKLIGHT_M60_A) - bool enabled = !( - // LB6 LB7 LB8 LB15 LB16 LB17 not present on M60-A - ( index == 18+6 ) || // LB6 - ( index == 18+7 ) || // LB7 - ( index == 18+8 ) || // LB8 - ( index == 18+15 ) || // LB15 - ( index == 18+16 ) || // LB16 - ( index == 18+17 ) || // LB17 - // HHKB blockers (LC17, LD17) and ISO extra keys (LC15,LD13) not present on M60-A - ( index == 36+17 ) || // LC17 - ( index == 54+17 ) || // LD17 - ( index == 36+15 ) || // LC15 - ( index == 54+13 ) ); // LD13 -#elif defined (RGB_BACKLIGHT_ZEAL60) - // LB6 LB7 LB8 LB15 LB16 LB17 not present on Zeal60 - bool enabled = !( ( index == 18+5 && !g_config.use_split_backspace ) || // LB5 - ( index == 36+15 && !g_config.use_split_left_shift ) || // LC15 - ( index == 54+8 && !g_config.use_split_right_shift ) || // LD8 - ( index == 54+13 && g_config.use_7u_spacebar ) || // LD13 - ( index == 36+17 && g_config.disable_hhkb_blocker_leds ) || // LC17 - ( index == 54+17 && g_config.disable_hhkb_blocker_leds ) || // LD17 - ( index == 18+6 ) || // LB6 - ( index == 18+7 ) || // LB7 - ( index == 18+8 ) || // LB8 - ( index == 18+15 ) || // LB15 - ( index == 18+16 ) || // LB16 - ( index == 18+17 ) ); // LB17 -#endif - // This only caches it for later - IS31FL3731_set_led_control_register( index, enabled, enabled, enabled ); - } - // This actually updates the LED drivers - IS31FL3731_update_led_control_registers( ISSI_ADDR_1, ISSI_ADDR_2 ); -#endif // !defined(RGB_BACKLIGHT_M6_B) - - // TODO: put the 1 second startup delay here? - - // clear the key hits - for ( int led=0; ledevent.pressed ) - { - backlight_set_key_hit( record->event.key.row, record->event.key.col ); - } - - switch(keycode) - { - case BR_INC: - if (record->event.pressed) - { - backlight_brightness_increase(); - } - return false; - break; - case BR_DEC: - if (record->event.pressed) - { - backlight_brightness_decrease(); - } - return false; - break; - case EF_INC: - if (record->event.pressed) - { - backlight_effect_increase(); - } - return false; - break; - case EF_DEC: - if (record->event.pressed) - { - backlight_effect_decrease(); - } - return false; - break; - case ES_INC: - if (record->event.pressed) - { - backlight_effect_speed_increase(); - } - return false; - break; - case ES_DEC: - if (record->event.pressed) - { - backlight_effect_speed_decrease(); - } - return false; - break; - case H1_INC: - if (record->event.pressed) - { - backlight_color_1_hue_increase(); - } - return false; - break; - case H1_DEC: - if (record->event.pressed) - { - backlight_color_1_hue_decrease(); - } - return false; - break; - case S1_INC: - if (record->event.pressed) - { - backlight_color_1_sat_increase(); - } - return false; - break; - case S1_DEC: - if (record->event.pressed) - { - backlight_color_1_sat_decrease(); - break; - } - return false; - break; - case H2_INC: - if (record->event.pressed) - { - backlight_color_2_hue_increase(); - } - return false; - break; - case H2_DEC: - if (record->event.pressed) - { - backlight_color_2_hue_decrease(); - } - return false; - break; - case S2_INC: - if (record->event.pressed) - { - backlight_color_2_sat_increase(); - } - return false; - break; - case S2_DEC: - if (record->event.pressed) - { - backlight_color_2_sat_decrease(); - break; - } - return false; - break; - } - - return true; -} - -// Deals with the messy details of incrementing an integer -uint8_t increment( uint8_t value, uint8_t step, uint8_t min, uint8_t max ) -{ - int16_t new_value = value; - new_value += step; - return MIN( MAX( new_value, min ), max ); -} - -uint8_t decrement( uint8_t value, uint8_t step, uint8_t min, uint8_t max ) -{ - int16_t new_value = value; - new_value -= step; - return MIN( MAX( new_value, min ), max ); -} - -void backlight_effect_increase(void) -{ - g_config.effect = increment( g_config.effect, 1, 0, BACKLIGHT_EFFECT_MAX ); - backlight_config_save(); -} - -void backlight_effect_decrease(void) -{ - g_config.effect = decrement( g_config.effect, 1, 0, BACKLIGHT_EFFECT_MAX ); - backlight_config_save(); -} - -void backlight_effect_speed_increase(void) -{ - g_config.effect_speed = increment( g_config.effect_speed, 1, 0, 3 ); - backlight_config_save(); -} - -void backlight_effect_speed_decrease(void) -{ - g_config.effect_speed = decrement( g_config.effect_speed, 1, 0, 3 ); - backlight_config_save(); -} - -void backlight_brightness_increase(void) -{ - g_config.brightness = increment( g_config.brightness, 8, 0, 255 ); - backlight_config_save(); -} - -void backlight_brightness_decrease(void) -{ - g_config.brightness = decrement( g_config.brightness, 8, 0, 255 ); - backlight_config_save(); -} - -void backlight_color_1_hue_increase(void) -{ - g_config.color_1.h = increment( g_config.color_1.h, 8, 0, 255 ); - backlight_config_save(); -} - -void backlight_color_1_hue_decrease(void) -{ - g_config.color_1.h = decrement( g_config.color_1.h, 8, 0, 255 ); - backlight_config_save(); -} - -void backlight_color_1_sat_increase(void) -{ - g_config.color_1.s = increment( g_config.color_1.s, 8, 0, 255 ); - backlight_config_save(); -} - -void backlight_color_1_sat_decrease(void) -{ - g_config.color_1.s = decrement( g_config.color_1.s, 8, 0, 255 ); - backlight_config_save(); -} - -void backlight_color_2_hue_increase(void) -{ - g_config.color_2.h = increment( g_config.color_2.h, 8, 0, 255 ); - backlight_config_save(); -} - -void backlight_color_2_hue_decrease(void) -{ - g_config.color_2.h = decrement( g_config.color_2.h, 8, 0, 255 ); - backlight_config_save(); -} - -void backlight_color_2_sat_increase(void) -{ - g_config.color_2.s = increment( g_config.color_2.s, 8, 0, 255 ); - backlight_config_save(); -} - -void backlight_color_2_sat_decrease(void) -{ - g_config.color_2.s = decrement( g_config.color_2.s, 8, 0, 255 ); - backlight_config_save(); -} - -#if defined(RGB_DEBUGGING_ONLY) -void backlight_test_led( uint8_t index, bool red, bool green, bool blue ) -{ - for ( int i=0; i. - */ -#pragma once - -#if RGB_BACKLIGHT_ENABLED -#else -#error rgb_backlight.h included when RGB_BACKLIGHT_ENABLED == 0 -#endif // RGB_BACKLIGHT_ENABLED - -#include -#include - -#include "quantum/color.h" - -typedef struct PACKED -{ - uint8_t h; - uint8_t s; -} HS; - -typedef struct -{ - HS color; - uint8_t index; -} backlight_config_indicator; - -typedef struct -{ - bool use_split_backspace:1; // | - bool use_split_left_shift:1; // | - bool use_split_right_shift:1; // | - bool use_7u_spacebar:1; // | - bool use_iso_enter:1; // | - bool disable_when_usb_suspended:1; // | - bool disable_hhkb_blocker_leds:1; // | - bool __pad7:1; // 1 byte - uint8_t disable_after_timeout; // 1 byte - uint8_t brightness; // 1 byte - uint8_t effect; // 1 byte - uint8_t effect_speed; // 1 byte - HS color_1; // 2 bytes - HS color_2; // 2 bytes - backlight_config_indicator caps_lock_indicator; // 3 bytes - backlight_config_indicator layer_1_indicator; // 3 bytes - backlight_config_indicator layer_2_indicator; // 3 bytes - backlight_config_indicator layer_3_indicator; // 3 bytes - uint16_t alphas_mods[5]; // 10 bytes -#if defined(RGB_BACKLIGHT_M6_B) - HS custom_color[6]; // 12 bytes -#endif -} backlight_config; // = 31 bytes (M6-B = 43 bytes) - -void backlight_config_load(void); -void backlight_config_save(void); -void backlight_config_set_value( uint8_t *data ); -void backlight_config_get_value( uint8_t *data ); - -void backlight_init_drivers(void); - -void backlight_timer_init(void); -void backlight_timer_enable(void); -void backlight_timer_disable(void); - -void backlight_set_suspend_state(bool state); -void backlight_set_indicator_state(uint8_t state); - -// This should not be called from an interrupt -// (eg. from a timer interrupt). -// Call this while idle (in between matrix scans). -// If the buffer is dirty, it will update the driver with the buffer. -void backlight_update_pwm_buffers(void); - -// Handle backlight specific keycodes -bool process_record_backlight(uint16_t keycode, keyrecord_t *record); - -void backlight_set_key_hit(uint8_t row, uint8_t col); - -void backlight_effect_increase(void); -void backlight_effect_decrease(void); -void backlight_effect_speed_increase(void); -void backlight_effect_speed_decrease(void); - -void backlight_brightness_increase(void); -void backlight_brightness_decrease(void); - -void backlight_color_1_hue_increase(void); -void backlight_color_1_hue_decrease(void); -void backlight_color_1_sat_increase(void); -void backlight_color_1_sat_decrease(void); -void backlight_color_2_hue_increase(void); -void backlight_color_2_hue_decrease(void); -void backlight_color_2_sat_increase(void); -void backlight_color_2_sat_decrease(void); - -void backlight_test_led( uint8_t index, bool red, bool green, bool blue ); -void backlight_debug_led(bool state); - diff --git a/users/stanrc85/rgb_backlight_api.h b/users/stanrc85/rgb_backlight_api.h deleted file mode 100644 index 680ba4d99c2..00000000000 --- a/users/stanrc85/rgb_backlight_api.h +++ /dev/null @@ -1,43 +0,0 @@ -/* Copyright 2017 Jason Williams (Wilba) - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - */ -#pragma once - -enum backlight_config_value -{ - id_use_split_backspace = 0x01, - id_use_split_left_shift = 0x02, - id_use_split_right_shift = 0x03, - id_use_7u_spacebar = 0x04, - id_use_iso_enter = 0x05, - id_disable_hhkb_blocker_leds = 0x06, - id_disable_when_usb_suspended = 0x07, - id_disable_after_timeout = 0x08, - id_brightness = 0x09, - id_effect = 0x0A, - id_effect_speed = 0x0B, - id_color_1 = 0x0C, - id_color_2 = 0x0D, - id_caps_lock_indicator_color = 0x0E, - id_caps_lock_indicator_row_col = 0x0F, - id_layer_1_indicator_color = 0x10, - id_layer_1_indicator_row_col = 0x11, - id_layer_2_indicator_color = 0x12, - id_layer_2_indicator_row_col = 0x13, - id_layer_3_indicator_color = 0x14, - id_layer_3_indicator_row_col = 0x15, - id_alphas_mods = 0x16, - id_custom_color = 0x17 -}; diff --git a/users/stanrc85/rgb_backlight_keycodes.h b/users/stanrc85/rgb_backlight_keycodes.h deleted file mode 100644 index ba7f03f89d4..00000000000 --- a/users/stanrc85/rgb_backlight_keycodes.h +++ /dev/null @@ -1,34 +0,0 @@ -/* Copyright 2017 Jason Williams (Wilba) - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - */ -#pragma once - -// This is hardcoded at 0x5F00 so it's well after keycode value SAFE_RANGE -enum backlight_keycodes { - BR_INC = 0x5F00, // backlight brightness increase - BR_DEC, // backlight brightness decrease - EF_INC, // backlight effect increase - EF_DEC, // backlight effect decrease - ES_INC, - ES_DEC, - H1_INC, - H1_DEC, - S1_INC, - S1_DEC, - H2_INC, - H2_DEC, - S2_INC, - S2_DEC -}; From 67793b39122e2d16b6ac194c67e02df8a0c6e0c7 Mon Sep 17 00:00:00 2001 From: stanrc85 <47038504+stanrc85@users.noreply.github.com> Date: Wed, 3 Apr 2019 09:19:22 -0400 Subject: [PATCH 014/171] remove call to custom rgb file --- users/stanrc85/rules.mk | 4 ---- 1 file changed, 4 deletions(-) diff --git a/users/stanrc85/rules.mk b/users/stanrc85/rules.mk index 83e9cb6e42a..4b66f9692db 100644 --- a/users/stanrc85/rules.mk +++ b/users/stanrc85/rules.mk @@ -14,7 +14,3 @@ ifeq ($(strip $(RGBLIGHT_ENABLE)), yes) # Include my fancy rgb functions source here SRC += layer_rgb.c endif - -ifeq ($(strip $(KEYBOARD)), hs60/v2) - SRC += rgb_backlight.c -endif From 0e10a66c05bfe4b0ea7514673f6e544885108cc5 Mon Sep 17 00:00:00 2001 From: stanrc85 <47038504+stanrc85@users.noreply.github.com> Date: Wed, 3 Apr 2019 09:21:04 -0400 Subject: [PATCH 015/171] Call default zeal60 rgb file --- keyboards/hs60/v2/keymaps/stanrc85/rules.mk | 1 + 1 file changed, 1 insertion(+) diff --git a/keyboards/hs60/v2/keymaps/stanrc85/rules.mk b/keyboards/hs60/v2/keymaps/stanrc85/rules.mk index e0c9ead8dd4..c46a6b9528c 100644 --- a/keyboards/hs60/v2/keymaps/stanrc85/rules.mk +++ b/keyboards/hs60/v2/keymaps/stanrc85/rules.mk @@ -1,5 +1,6 @@ # project specific files SRC = keyboards/zeal60/zeal60.c \ + keyboards/zeal60/rgb_backlight.c \ drivers/issi/is31fl3733.c \ quantum/color.c \ drivers/arm/i2c_master.c From caefb1c61eca10dcb70ca6481a8a592057de7318 Mon Sep 17 00:00:00 2001 From: MechMerlin <30334081+mechmerlin@users.noreply.github.com> Date: Wed, 3 Apr 2019 09:47:55 -0700 Subject: [PATCH 016/171] [Keyboard] Quantrik Kyuu 65% Board (#5541) * initial commit * get rid of some of the vanilla cookie cutter code * Put in the matrix size and the pins * add LAYOUT macro and a suitable keymap * Add QMK Configurator support * set bootmagic to lite * put a RESET key into the default keymap * edit kyuu readme file for description and quantrik.com link * Update keyboards/quantrik/kyuu/config.h Co-Authored-By: mechmerlin <30334081+mechmerlin@users.noreply.github.com> * fix captilization of keyboard name * fix keymap wrapping issue and add MO key * preserve RESET key location * use one of the macros --- keyboards/quantrik/kyuu/config.h | 245 ++++++++++++++++++ keyboards/quantrik/kyuu/info.json | 82 ++++++ .../quantrik/kyuu/keymaps/default/config.h | 19 ++ .../quantrik/kyuu/keymaps/default/keymap.c | 74 ++++++ .../quantrik/kyuu/keymaps/default/readme.md | 1 + keyboards/quantrik/kyuu/kyuu.c | 43 +++ keyboards/quantrik/kyuu/kyuu.h | 42 +++ keyboards/quantrik/kyuu/readme.md | 13 + keyboards/quantrik/kyuu/rules.mk | 81 ++++++ 9 files changed, 600 insertions(+) create mode 100644 keyboards/quantrik/kyuu/config.h create mode 100644 keyboards/quantrik/kyuu/info.json create mode 100644 keyboards/quantrik/kyuu/keymaps/default/config.h create mode 100644 keyboards/quantrik/kyuu/keymaps/default/keymap.c create mode 100644 keyboards/quantrik/kyuu/keymaps/default/readme.md create mode 100644 keyboards/quantrik/kyuu/kyuu.c create mode 100644 keyboards/quantrik/kyuu/kyuu.h create mode 100644 keyboards/quantrik/kyuu/readme.md create mode 100644 keyboards/quantrik/kyuu/rules.mk diff --git a/keyboards/quantrik/kyuu/config.h b/keyboards/quantrik/kyuu/config.h new file mode 100644 index 00000000000..655314985d7 --- /dev/null +++ b/keyboards/quantrik/kyuu/config.h @@ -0,0 +1,245 @@ +/* +Copyright 2019 mechmerlin + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#pragma once + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0xFEED +#define PRODUCT_ID 0x0000 +#define DEVICE_VER 0x0001 +#define MANUFACTURER Quantrik +#define PRODUCT Kyuu +#define DESCRIPTION A 65% keyboard with blocker + +/* key matrix size */ +#define MATRIX_ROWS 5 +#define MATRIX_COLS 15 + +/* + * Keyboard Matrix Assignments + * + * Change this to how you wired your keyboard + * COLS: AVR pins used for columns, left to right + * ROWS: AVR pins used for rows, top to bottom + * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) + * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) + * +*/ +#define MATRIX_ROW_PINS { B6, B5, B4, D7, D6 } +#define MATRIX_COL_PINS { F1, F4, F5, F6, F7, C7, C6, F0, B7, D0, D5, D3, D2, D1, B3 } +#define UNUSED_PINS + +/* COL2ROW, ROW2COL*/ +#define DIODE_DIRECTION COL2ROW + +/* + * Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN. + */ +// #define SOFT_SERIAL_PIN D0 // or D1, D2, D3, E6 + +// #define BACKLIGHT_PIN B7 +// #define BACKLIGHT_BREATHING +// #define BACKLIGHT_LEVELS 3 + +// #define RGB_DI_PIN E2 +// #ifdef RGB_DI_PIN +// #define RGBLED_NUM 16 +// #define RGBLIGHT_HUE_STEP 8 +// #define RGBLIGHT_SAT_STEP 8 +// #define RGBLIGHT_VAL_STEP 8 +// #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */ +// #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ +// /*== all animations enable ==*/ +// #define RGBLIGHT_ANIMATIONS +// /*== or choose animations ==*/ +// #define RGBLIGHT_EFFECT_BREATHING +// #define RGBLIGHT_EFFECT_RAINBOW_MOOD +// #define RGBLIGHT_EFFECT_RAINBOW_SWIRL +// #define RGBLIGHT_EFFECT_SNAKE +// #define RGBLIGHT_EFFECT_KNIGHT +// #define RGBLIGHT_EFFECT_CHRISTMAS +// #define RGBLIGHT_EFFECT_STATIC_GRADIENT +// #define RGBLIGHT_EFFECT_RGB_TEST +// #define RGBLIGHT_EFFECT_ALTERNATING +// #endif + +/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ +#define DEBOUNCING_DELAY 5 + +/* define if matrix has ghost (lacks anti-ghosting diodes) */ +//#define MATRIX_HAS_GHOST + +/* number of backlight levels */ + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +#define LOCKING_SUPPORT_ENABLE +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE + +/* If defined, GRAVE_ESC will always act as ESC when CTRL is held. + * This is userful for the Windows task manager shortcut (ctrl+shift+esc). + */ +// #define GRAVE_ESC_CTRL_OVERRIDE + +/* + * Force NKRO + * + * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved + * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the + * makefile for this to work.) + * + * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) + * until the next keyboard reset. + * + * NKRO may prevent your keystrokes from being detected in the BIOS, but it is + * fully operational during normal computer usage. + * + * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) + * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by + * bootmagic, NKRO mode will always be enabled until it is toggled again during a + * power-up. + * + */ +//#define FORCE_NKRO + +/* + * Magic Key Options + * + * Magic keys are hotkey commands that allow control over firmware functions of + * the keyboard. They are best used in combination with the HID Listen program, + * found here: https://www.pjrc.com/teensy/hid_listen.html + * + * The options below allow the magic key functionality to be changed. This is + * useful if your keyboard/keypad is missing keys and you want magic key support. + * + */ + +/* key combination for magic key command */ +/* defined by default; to change, uncomment and set to the combination you want */ +// #define IS_COMMAND() (get_mods() == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT))) + +/* control how magic key switches layers */ +//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true +//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true +//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false + +/* override magic key keymap */ +//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS +//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS +//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM +//#define MAGIC_KEY_HELP H +//#define MAGIC_KEY_HELP_ALT SLASH +//#define MAGIC_KEY_DEBUG D +//#define MAGIC_KEY_DEBUG_MATRIX X +//#define MAGIC_KEY_DEBUG_KBD K +//#define MAGIC_KEY_DEBUG_MOUSE M +//#define MAGIC_KEY_VERSION V +//#define MAGIC_KEY_STATUS S +//#define MAGIC_KEY_CONSOLE C +//#define MAGIC_KEY_LAYER0 0 +//#define MAGIC_KEY_LAYER0_ALT GRAVE +//#define MAGIC_KEY_LAYER1 1 +//#define MAGIC_KEY_LAYER2 2 +//#define MAGIC_KEY_LAYER3 3 +//#define MAGIC_KEY_LAYER4 4 +//#define MAGIC_KEY_LAYER5 5 +//#define MAGIC_KEY_LAYER6 6 +//#define MAGIC_KEY_LAYER7 7 +//#define MAGIC_KEY_LAYER8 8 +//#define MAGIC_KEY_LAYER9 9 +//#define MAGIC_KEY_BOOTLOADER B +//#define MAGIC_KEY_BOOTLOADER_ALT ESC +//#define MAGIC_KEY_LOCK CAPS +//#define MAGIC_KEY_EEPROM E +//#define MAGIC_KEY_EEPROM_CLEAR BSPACE +//#define MAGIC_KEY_NKRO N +//#define MAGIC_KEY_SLEEP_LED Z + +/* + * Feature disable options + * These options are also useful to firmware size reduction. + */ + +/* disable debug print */ +//#define NO_DEBUG + +/* disable print */ +//#define NO_PRINT + +/* disable action features */ +//#define NO_ACTION_LAYER +//#define NO_ACTION_TAPPING +//#define NO_ACTION_ONESHOT +//#define NO_ACTION_MACRO +//#define NO_ACTION_FUNCTION + +/* + * MIDI options + */ + +/* Prevent use of disabled MIDI features in the keymap */ +//#define MIDI_ENABLE_STRICT 1 + +/* enable basic MIDI features: + - MIDI notes can be sent when in Music mode is on +*/ +//#define MIDI_BASIC + +/* enable advanced MIDI features: + - MIDI notes can be added to the keymap + - Octave shift and transpose + - Virtual sustain, portamento, and modulation wheel + - etc. +*/ +//#define MIDI_ADVANCED + +/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */ +//#define MIDI_TONE_KEYCODE_OCTAVES 1 + +/* + * HD44780 LCD Display Configuration + */ +/* +#define LCD_LINES 2 //< number of visible lines of the display +#define LCD_DISP_LENGTH 16 //< visibles characters per line of the display + +#define LCD_IO_MODE 1 //< 0: memory mapped mode, 1: IO port mode + +#if LCD_IO_MODE +#define LCD_PORT PORTB //< port for the LCD lines +#define LCD_DATA0_PORT LCD_PORT //< port for 4bit data bit 0 +#define LCD_DATA1_PORT LCD_PORT //< port for 4bit data bit 1 +#define LCD_DATA2_PORT LCD_PORT //< port for 4bit data bit 2 +#define LCD_DATA3_PORT LCD_PORT //< port for 4bit data bit 3 +#define LCD_DATA0_PIN 4 //< pin for 4bit data bit 0 +#define LCD_DATA1_PIN 5 //< pin for 4bit data bit 1 +#define LCD_DATA2_PIN 6 //< pin for 4bit data bit 2 +#define LCD_DATA3_PIN 7 //< pin for 4bit data bit 3 +#define LCD_RS_PORT LCD_PORT //< port for RS line +#define LCD_RS_PIN 3 //< pin for RS line +#define LCD_RW_PORT LCD_PORT //< port for RW line +#define LCD_RW_PIN 2 //< pin for RW line +#define LCD_E_PORT LCD_PORT //< port for Enable line +#define LCD_E_PIN 1 //< pin for Enable line +#endif +*/ + +/* Bootmagic Lite key configuration */ +// #define BOOTMAGIC_LITE_ROW 0 +// #define BOOTMAGIC_LITE_COLUMN 0 diff --git a/keyboards/quantrik/kyuu/info.json b/keyboards/quantrik/kyuu/info.json new file mode 100644 index 00000000000..05c1b40b95b --- /dev/null +++ b/keyboards/quantrik/kyuu/info.json @@ -0,0 +1,82 @@ +{ + "keyboard_name": "Kyuu", + "url": "", + "maintainer": "qmk", + "width": 16, + "height": 5, + "layouts": { + "LAYOUT": { + "key_count": 67, + "layout": [ + {"label":"K00 (B6,F1)", "x":0, "y":0}, + {"label":"K01 (B6,F4)", "x":1, "y":0}, + {"label":"K02 (B6,F5)", "x":2, "y":0}, + {"label":"K03 (B6,F6)", "x":3, "y":0}, + {"label":"K04 (B6,F7)", "x":4, "y":0}, + {"label":"K05 (B6,C7)", "x":5, "y":0}, + {"label":"K06 (B6,C6)", "x":6, "y":0}, + {"label":"K07 (B6,F0)", "x":7, "y":0}, + {"label":"K08 (B6,B7)", "x":8, "y":0}, + {"label":"K09 (B6,D0)", "x":9, "y":0}, + {"label":"K0A (B6,D5)", "x":10, "y":0}, + {"label":"K0B (B6,D3)", "x":11, "y":0}, + {"label":"K0C (B6,D2)", "x":12, "y":0}, + {"label":"K0D (B6,D1)", "x":13, "y":0}, + {"label":"K0E (B6,B3)", "x":14, "y":0}, + {"label":"K2E (B4,B3)", "x":15, "y":0}, + {"label":"K10 (B5,F1)", "x":0, "y":1, "w":1.5}, + {"label":"K11 (B5,F4)", "x":1.5, "y":1}, + {"label":"K12 (B5,F5)", "x":2.5, "y":1}, + {"label":"K13 (B5,F6)", "x":3.5, "y":1}, + {"label":"K14 (B5,F7)", "x":4.5, "y":1}, + {"label":"K15 (B5,C7)", "x":5.5, "y":1}, + {"label":"K16 (B5,C6)", "x":6.5, "y":1}, + {"label":"K17 (B5,F0)", "x":7.5, "y":1}, + {"label":"K18 (B5,B7)", "x":8.5, "y":1}, + {"label":"K19 (B5,D0)", "x":9.5, "y":1}, + {"label":"K1A (B5,D5)", "x":10.5, "y":1}, + {"label":"K1B (B5,D3)", "x":11.5, "y":1}, + {"label":"K1C (B5,D2)", "x":12.5, "y":1}, + {"label":"K1D (B5,D1)", "x":13.5, "y":1, "w":1.5}, + {"label":"K1E (B5,B3)", "x":15, "y":1}, + {"label":"K20 (B4,F1)", "x":0, "y":2, "w":1.75}, + {"label":"K21 (B4,F4)", "x":1.75, "y":2}, + {"label":"K22 (B4,F5)", "x":2.75, "y":2}, + {"label":"K23 (B4,F6)", "x":3.75, "y":2}, + {"label":"K24 (B4,F7)", "x":4.75, "y":2}, + {"label":"K25 (B4,C7)", "x":5.75, "y":2}, + {"label":"K26 (B4,C6)", "x":6.75, "y":2}, + {"label":"K27 (B4,F0)", "x":7.75, "y":2}, + {"label":"K28 (B4,B7)", "x":8.75, "y":2}, + {"label":"K29 (B4,D0)", "x":9.75, "y":2}, + {"label":"K2A (B4,D5)", "x":10.75, "y":2}, + {"label":"K2B (B4,D3)", "x":11.75, "y":2}, + {"label":"K2C (B4,D2)", "x":12.75, "y":2, "w":2.25}, + {"label":"K2D (B4,D1)", "x":15, "y":2}, + {"label":"K30 (D7,F1)", "x":0, "y":3, "w":2.25}, + {"label":"K31 (D7,F4)", "x":2.25, "y":3}, + {"label":"K32 (D7,F5)", "x":3.25, "y":3}, + {"label":"K33 (D7,F6)", "x":4.25, "y":3}, + {"label":"K34 (D7,F7)", "x":5.25, "y":3}, + {"label":"K35 (D7,C7)", "x":6.25, "y":3}, + {"label":"K36 (D7,C6)", "x":7.25, "y":3}, + {"label":"K37 (D7,F0)", "x":8.25, "y":3}, + {"label":"K38 (D7,B7)", "x":9.25, "y":3}, + {"label":"K39 (D7,D0)", "x":10.25, "y":3}, + {"label":"K3A (D7,D5)", "x":11.25, "y":3}, + {"label":"K3B (D7,D3)", "x":12.25, "y":3, "w":1.75}, + {"label":"K3C (D7,D2)", "x":14, "y":3}, + {"label":"K3D (D7,D1)", "x":15, "y":3}, + {"label":"K40 (D6,F1)", "x":0, "y":4, "w":1.5}, + {"label":"K41 (D6,F4)", "x":1.5, "y":4}, + {"label":"K42 (D6,F5)", "x":2.5, "y":4, "w":1.5}, + {"label":"K46 (D6,C6)", "x":4, "y":4, "w":7}, + {"label":"K4A (D6,D5)", "x":11, "y":4, "w":1.5}, + {"label":"K4B (D6,D3)", "x":13, "y":4}, + {"label":"K4C (D6,D2)", "x":14, "y":4}, + {"label":"K4D (D6,D1)", "x":15, "y":4} + ] + } + } + } + \ No newline at end of file diff --git a/keyboards/quantrik/kyuu/keymaps/default/config.h b/keyboards/quantrik/kyuu/keymaps/default/config.h new file mode 100644 index 00000000000..60dd02a9d0e --- /dev/null +++ b/keyboards/quantrik/kyuu/keymaps/default/config.h @@ -0,0 +1,19 @@ +/* Copyright 2019 mechmerlin + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#pragma once + +// place overrides here diff --git a/keyboards/quantrik/kyuu/keymaps/default/keymap.c b/keyboards/quantrik/kyuu/keymaps/default/keymap.c new file mode 100644 index 00000000000..077d7ac5a64 --- /dev/null +++ b/keyboards/quantrik/kyuu/keymaps/default/keymap.c @@ -0,0 +1,74 @@ +/* Copyright 2019 mechmerlin + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ +#include QMK_KEYBOARD_H + +// Defines the keycodes used by our macros in process_record_user +enum custom_keycodes { + QMKBEST = SAFE_RANGE, + QMKURL +}; + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [0] = LAYOUT( \ + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSLS, KC_GRV, KC_HOME, \ + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSPC, KC_PGUP, \ + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_PGDN, \ + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_LSFT, KC_UP, KC_END, \ + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, MO(1), KC_LEFT, KC_DOWN, KC_RGHT \ + ), + [1] = LAYOUT( \ + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \ + KC_TRNS, QMKBEST, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RESET, KC_TRNS, \ + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \ + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \ + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS \ + ), + +}; + +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + switch (keycode) { + case QMKBEST: + if (record->event.pressed) { + // when keycode QMKBEST is pressed + SEND_STRING("QMK is the best thing ever!"); + } else { + // when keycode QMKBEST is released + } + break; + case QMKURL: + if (record->event.pressed) { + // when keycode QMKURL is pressed + SEND_STRING("https://qmk.fm/" SS_TAP(X_ENTER)); + } else { + // when keycode QMKURL is released + } + break; + } + return true; +} + +void matrix_init_user(void) { + +} + +void matrix_scan_user(void) { + +} + +void led_set_user(uint8_t usb_led) { + +} diff --git a/keyboards/quantrik/kyuu/keymaps/default/readme.md b/keyboards/quantrik/kyuu/keymaps/default/readme.md new file mode 100644 index 00000000000..f87ce36e38e --- /dev/null +++ b/keyboards/quantrik/kyuu/keymaps/default/readme.md @@ -0,0 +1 @@ +# The default keymap for Kyuu diff --git a/keyboards/quantrik/kyuu/kyuu.c b/keyboards/quantrik/kyuu/kyuu.c new file mode 100644 index 00000000000..e9a72a5749a --- /dev/null +++ b/keyboards/quantrik/kyuu/kyuu.c @@ -0,0 +1,43 @@ +/* Copyright 2019 mechmerlin + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ +#include "kyuu.h" + +void matrix_init_kb(void) { + // put your keyboard start-up code here + // runs once when the firmware starts up + + matrix_init_user(); +} + +void matrix_scan_kb(void) { + // put your looping keyboard code here + // runs every cycle (a lot) + + matrix_scan_user(); +} + +bool process_record_kb(uint16_t keycode, keyrecord_t *record) { + // put your per-action keyboard code here + // runs for every action, just before processing by the firmware + + return process_record_user(keycode, record); +} + +void led_set_kb(uint8_t usb_led) { + // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here + + led_set_user(usb_led); +} diff --git a/keyboards/quantrik/kyuu/kyuu.h b/keyboards/quantrik/kyuu/kyuu.h new file mode 100644 index 00000000000..82c024f2e7f --- /dev/null +++ b/keyboards/quantrik/kyuu/kyuu.h @@ -0,0 +1,42 @@ +/* Copyright 2019 mechmerlin + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ +#pragma once + +#include "quantum.h" + +/* This a shortcut to help you visually see your layout. + * + * The first section contains all of the arguments representing the physical + * layout of the board and position of the keys. + * + * The second converts the arguments into a two-dimensional array which + * represents the switch matrix. + */ +#define LAYOUT( \ + k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C, k0D, k0E, k2E, \ + k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1A, k1B, k1C, k1D, k1E, \ + k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2A, k2B, k2C, \ + k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3A, k3B, k3C, k3D, \ + k40, k41, k42, k46, k47, k4A, k4B, k4C, k4D \ +) \ +{ \ + { k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C, k0D, k0E }, \ + { k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1A, k1B, k1C, k1D, k1E }, \ + { k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2A, k2B, k2C, KC_NO, k2E }, \ + { k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3A, k3B, k3C, k3D, KC_NO }, \ + { k40, k41, k42, KC_NO, KC_NO, KC_NO, k46, k47, KC_NO, KC_NO, k4A, k4B, k4C, k4D, KC_NO }, \ +} + diff --git a/keyboards/quantrik/kyuu/readme.md b/keyboards/quantrik/kyuu/readme.md new file mode 100644 index 00000000000..2b331409800 --- /dev/null +++ b/keyboards/quantrik/kyuu/readme.md @@ -0,0 +1,13 @@ +# kyuu + +Kyuu is a 65% keyboard inspired by the TGR 910's top right blocker. + +Keyboard Maintainer: [MechMerlin](https://github.com/mechmerlin) +Hardware Supported: Quantrik 65% PCB +Hardware Availability: [Geekhack Group Buy](https://geekhack.org/index.php?topic=97810.0), [quantrik.com](https://www.quantrik.com/collections/frontpage/products/kyuu-keyboard) + +Make example for this keyboard (after setting up your build environment): + + make quantrik/kyuu:default + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/quantrik/kyuu/rules.mk b/keyboards/quantrik/kyuu/rules.mk new file mode 100644 index 00000000000..3229957d9cb --- /dev/null +++ b/keyboards/quantrik/kyuu/rules.mk @@ -0,0 +1,81 @@ +# MCU name +#MCU = at90usb1286 +MCU = atmega32u4 + +# Processor frequency. +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to +# calculate timings. Do NOT tack on a 'UL' at the end, this will be done +# automatically to create a 32-bit value in your source code. +# +# This will be an integer division of F_USB below, as it is sourced by +# F_USB after it has run through any CPU prescalers. Note that this value +# does not *change* the processor frequency - it should merely be updated to +# reflect the processor speed set externally so that the code can use accurate +# software delays. +F_CPU = 16000000 + + +# +# LUFA specific +# +# Target architecture (see library "Board Types" documentation). +ARCH = AVR8 + +# Input clock frequency. +# This will define a symbol, F_USB, in all source code files equal to the +# input clock frequency (before any prescaling is performed) in Hz. This value may +# differ from F_CPU if prescaling is used on the latter, and is required as the +# raw input clock is fed directly to the PLL sections of the AVR for high speed +# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' +# at the end, this will be done automatically to create a 32-bit value in your +# source code. +# +# If no clock division is performed on the input clock inside the AVR (via the +# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. +F_USB = $(F_CPU) + +# Interrupt driven control endpoint task(+60) +OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT + + +# Bootloader selection +# Teensy halfkay +# Pro Micro caterina +# Atmel DFU atmel-dfu +# LUFA DFU lufa-dfu +# QMK DFU qmk-dfu +# atmega32a bootloadHID +BOOTLOADER = atmel-dfu + + +# If you don't know the bootloader type, then you can specify the +# Boot Section Size in *bytes* by uncommenting out the OPT_DEFS line +# Teensy halfKay 512 +# Teensy++ halfKay 1024 +# Atmel DFU loader 4096 +# LUFA bootloader 4096 +# USBaspLoader 2048 +# OPT_DEFS += -DBOOTLOADER_SIZE=4096 + + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = yes # Mouse keys(+4700) +EXTRAKEY_ENABLE = yes # Audio control and System control(+450) +CONSOLE_ENABLE = yes # Console for debug(+400) +COMMAND_ENABLE = yes # Commands for debug and configuration +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend +# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +NKRO_ENABLE = no # USB Nkey Rollover +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default +RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow +MIDI_ENABLE = no # MIDI support (+2400 to 4200, depending on config) +UNICODE_ENABLE = no # Unicode +BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID +AUDIO_ENABLE = no # Audio output on port C6 +FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches +HD44780_ENABLE = no # Enable support for HD44780 based LCDs (+400) From cb2f2fd258011e6637ed182f484a4317ac510db8 Mon Sep 17 00:00:00 2001 From: MechMerlin <30334081+mechmerlin@users.noreply.github.com> Date: Wed, 3 Apr 2019 10:17:25 -0700 Subject: [PATCH 017/171] [Keyboard] Small Refactor of Duck boards (#5521) * first [ass at pulling out common duck library functions * use new library in jetfire * use new library in duck lightsaver * use new library in octagon v2 * put Device into the library * refactor send_value * refactor send_value and send_color * use pragma once * use pragma once * use pragma once * use pragma once * rename backlight_led to indicator_leds to match with other duck boards * rename enum * make #define names consistent * rename ducklib to duck_led * update rules.mk ?= to = * put rgb in the correct order * add debounce debugging printouts * turn on bootmagic lite and set it to the top left most key commonly programmed as Escape * add reset key documentation * fix that typo * Update keyboards/duck/duck_led/duck_led.c Co-Authored-By: mechmerlin <30334081+mechmerlin@users.noreply.github.com> * include the correct library --- keyboards/duck/duck_led/duck_led.c | 7 +++ keyboards/duck/duck_led/duck_led.h | 16 ++++++ keyboards/duck/eagle_viper/readme.md | 1 - keyboards/duck/eagle_viper/v2/config.h | 8 +-- .../duck/eagle_viper/v2/indicator_leds.c | 23 +++------ .../duck/eagle_viper/v2/indicator_leds.h | 1 - keyboards/duck/eagle_viper/v2/matrix.c | 3 ++ keyboards/duck/eagle_viper/v2/readme.md | 2 + keyboards/duck/eagle_viper/v2/rules.mk | 28 +++++------ keyboards/duck/eagle_viper/v2/v2.h | 4 +- keyboards/duck/jetfire/config.h | 4 ++ .../{backlight_led.c => indicator_leds.c} | 43 ++++++---------- .../{backlight_led.h => indicator_leds.h} | 11 +---- keyboards/duck/jetfire/jetfire.c | 10 ++-- keyboards/duck/jetfire/jetfire.h | 4 +- keyboards/duck/jetfire/readme.md | 2 +- keyboards/duck/jetfire/rules.mk | 6 +-- keyboards/duck/lightsaver/config.h | 8 +-- keyboards/duck/lightsaver/indicator_leds.c | 49 ++++++++----------- keyboards/duck/lightsaver/lightsaver.h | 4 +- keyboards/duck/lightsaver/matrix.c | 3 ++ keyboards/duck/lightsaver/rules.mk | 28 +++++------ keyboards/duck/octagon/v1/config.h | 9 ++-- keyboards/duck/octagon/v1/matrix.c | 3 ++ keyboards/duck/octagon/v1/rules.mk | 26 +++++----- keyboards/duck/octagon/v1/v1.h | 4 +- keyboards/duck/octagon/v2/config.h | 8 +-- keyboards/duck/octagon/v2/indicator_leds.c | 36 +++++--------- keyboards/duck/octagon/v2/indicator_leds.h | 6 +-- keyboards/duck/octagon/v2/matrix.c | 3 ++ keyboards/duck/octagon/v2/readme.md | 2 + keyboards/duck/octagon/v2/rules.mk | 28 +++++------ keyboards/duck/octagon/v2/v2.h | 4 +- 33 files changed, 192 insertions(+), 202 deletions(-) create mode 100644 keyboards/duck/duck_led/duck_led.c create mode 100644 keyboards/duck/duck_led/duck_led.h rename keyboards/duck/jetfire/{backlight_led.c => indicator_leds.c} (76%) rename keyboards/duck/jetfire/{backlight_led.h => indicator_leds.h} (70%) diff --git a/keyboards/duck/duck_led/duck_led.c b/keyboards/duck/duck_led/duck_led.c new file mode 100644 index 00000000000..2fa920e4b61 --- /dev/null +++ b/keyboards/duck/duck_led/duck_led.c @@ -0,0 +1,7 @@ +#include +#include "duck_led.h" +#include "quantum.h" + +void show(void) { + wait_us((RES / 1000UL) + 1); +} diff --git a/keyboards/duck/duck_led/duck_led.h b/keyboards/duck/duck_led/duck_led.h new file mode 100644 index 00000000000..2546366d0c5 --- /dev/null +++ b/keyboards/duck/duck_led/duck_led.h @@ -0,0 +1,16 @@ +#pragma once + +#define RES 6000 + +#define NS_PER_SEC (1000000000L) +#define CYCLES_PER_SEC (F_CPU) +#define NS_PER_CYCLE (NS_PER_SEC / CYCLES_PER_SEC) +#define NS_TO_CYCLES(n) ((n) / NS_PER_CYCLE) + +enum Device { + Device_PCBRGB, + Device_STATUSLED +}; + +void show(void); + diff --git a/keyboards/duck/eagle_viper/readme.md b/keyboards/duck/eagle_viper/readme.md index 14fb1666983..3fec11bc0a8 100644 --- a/keyboards/duck/eagle_viper/readme.md +++ b/keyboards/duck/eagle_viper/readme.md @@ -9,4 +9,3 @@ Newest version is the [Eagle/Viper V2](http://duck0113.tistory.com/127) Make example for this keyboard (after setting up your build environment): make duck/eagle_viper/v2:default - diff --git a/keyboards/duck/eagle_viper/v2/config.h b/keyboards/duck/eagle_viper/v2/config.h index f454b2e0e1d..a0ce866cc35 100644 --- a/keyboards/duck/eagle_viper/v2/config.h +++ b/keyboards/duck/eagle_viper/v2/config.h @@ -15,8 +15,7 @@ You should have received a copy of the GNU General Public License along with this program. If not, see . */ -#ifndef CONFIG_H -#define CONFIG_H +#pragma once #include "config_common.h" @@ -44,6 +43,9 @@ along with this program. If not, see . #define RGB_DI_PIN D6 #define RGBLED_NUM 17 +/* Set to top left most key */ +#define BOOTMAGIC_LITE_ROW 4 +#define BOOTMAGIC_LITE_COLUMN 10 + #define TAPPING_TERM 200 -#endif diff --git a/keyboards/duck/eagle_viper/v2/indicator_leds.c b/keyboards/duck/eagle_viper/v2/indicator_leds.c index 03a93197da6..fc90ed3fbda 100644 --- a/keyboards/duck/eagle_viper/v2/indicator_leds.c +++ b/keyboards/duck/eagle_viper/v2/indicator_leds.c @@ -19,19 +19,13 @@ along with this program. If not, see . #include #include #include "indicator_leds.h" - -#define RES 6000 +#include "duck_led/duck_led.h" #define LED_T1H 600 #define LED_T1L 650 #define LED_T0H 250 #define LED_T0L 1000 -#define NS_PER_SEC (1000000000L) -#define CYCLES_PER_SEC (F_CPU) -#define NS_PER_CYCLE (NS_PER_SEC / CYCLES_PER_SEC) -#define NS_TO_CYCLES(n) ((n) / NS_PER_CYCLE) - void send_bit_d4(bool bitVal) { if(bitVal) { asm volatile ( @@ -66,14 +60,12 @@ void send_bit_d4(bool bitVal) { } } -void show(void) { - _delay_us((RES / 1000UL) + 1); -} - -void send_value(uint8_t byte) { +void send_value(uint8_t byte, enum Device device) { for(uint8_t b = 0; b < 8; b++) { - send_bit_d4(byte & 0b10000000); - byte <<= 1; + if(device == Device_STATUSLED) { + send_bit_d4(byte & 0b10000000); + byte <<= 1; + } } } @@ -83,7 +75,8 @@ void indicator_leds_set(bool leds[8]) { cli(); for(led_cnt = 0; led_cnt < 8; led_cnt++) - send_value(leds[led_cnt] ? 255 : 0); + send_value(leds[led_cnt] ? 255 : 0, Device_STATUSLED); sei(); show(); } + diff --git a/keyboards/duck/eagle_viper/v2/indicator_leds.h b/keyboards/duck/eagle_viper/v2/indicator_leds.h index c174fa404da..fe66eef6b2f 100644 --- a/keyboards/duck/eagle_viper/v2/indicator_leds.h +++ b/keyboards/duck/eagle_viper/v2/indicator_leds.h @@ -1,2 +1 @@ void indicator_leds_set(bool leds[8]); -void show(void); diff --git a/keyboards/duck/eagle_viper/v2/matrix.c b/keyboards/duck/eagle_viper/v2/matrix.c index 7003a7ae00d..a6bc5634225 100644 --- a/keyboards/duck/eagle_viper/v2/matrix.c +++ b/keyboards/duck/eagle_viper/v2/matrix.c @@ -89,6 +89,9 @@ uint8_t matrix_scan(void) { bool curr_bit = rows & (1<. */ -#ifndef V2_H -#define V2_H +#pragma once #include "quantum.h" @@ -78,4 +77,3 @@ #define LAYOUT_eagle LAYOUT_60_ansi -#endif diff --git a/keyboards/duck/jetfire/config.h b/keyboards/duck/jetfire/config.h index 4bc535b1926..774e2849183 100644 --- a/keyboards/duck/jetfire/config.h +++ b/keyboards/duck/jetfire/config.h @@ -48,6 +48,10 @@ along with this program. If not, see . /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ #define DEBOUNCING_DELAY 5 +/* Set to top left most key */ +#define BOOTMAGIC_LITE_ROW 5 +#define BOOTMAGIC_LITE_COLUMN 10 + /* If defined, GRAVE_ESC will always act as ESC when CTRL is held. * This is userful for the Windows task manager shortcut (ctrl+shift+esc). */ diff --git a/keyboards/duck/jetfire/backlight_led.c b/keyboards/duck/jetfire/indicator_leds.c similarity index 76% rename from keyboards/duck/jetfire/backlight_led.c rename to keyboards/duck/jetfire/indicator_leds.c index 7e9dca6e9f1..7dbdb1ff79b 100644 --- a/keyboards/duck/jetfire/backlight_led.c +++ b/keyboards/duck/jetfire/indicator_leds.c @@ -17,21 +17,13 @@ along with this program. If not, see . #include #include #include -#include "backlight_led.h" +#include "indicator_leds.h" #include "quantum.h" -// #include "led.h" - -#define T1H 900 -#define T1L 600 -#define T0H 400 -#define T0L 900 -#define RES 6000 - -#define NS_PER_SEC (1000000000L) -#define CYCLES_PER_SEC (F_CPU) -#define NS_PER_CYCLE (NS_PER_SEC / CYCLES_PER_SEC) -#define NS_TO_CYCLES(n) ((n) / NS_PER_CYCLE) +#define LED_T1H 900 +#define LED_T1L 600 +#define LED_T0H 400 +#define LED_T0L 900 void send_bit_d4(bool bitVal) { @@ -48,8 +40,8 @@ void send_bit_d4(bool bitVal) :: [port] "I" (_SFR_IO_ADDR(PORTD)), [bit] "I" (4), - [onCycles] "I" (NS_TO_CYCLES(T1H) - 2), - [offCycles] "I" (NS_TO_CYCLES(T1L) - 2)); + [onCycles] "I" (NS_TO_CYCLES(LED_T1H) - 2), + [offCycles] "I" (NS_TO_CYCLES(LED_T1L) - 2)); } else { asm volatile ( "sbi %[port], %[bit] \n\t" @@ -63,8 +55,8 @@ void send_bit_d4(bool bitVal) :: [port] "I" (_SFR_IO_ADDR(PORTD)), [bit] "I" (4), - [onCycles] "I" (NS_TO_CYCLES(T0H) - 2), - [offCycles] "I" (NS_TO_CYCLES(T0L) - 2)); + [onCycles] "I" (NS_TO_CYCLES(LED_T0H) - 2), + [offCycles] "I" (NS_TO_CYCLES(LED_T0L) - 2)); } } @@ -83,8 +75,8 @@ void send_bit_d6(bool bitVal) :: [port] "I" (_SFR_IO_ADDR(PORTD)), [bit] "I" (6), - [onCycles] "I" (NS_TO_CYCLES(T1H) - 2), - [offCycles] "I" (NS_TO_CYCLES(T1L) - 2)); + [onCycles] "I" (NS_TO_CYCLES(LED_T1H) - 2), + [offCycles] "I" (NS_TO_CYCLES(LED_T1L) - 2)); } else { asm volatile ( "sbi %[port], %[bit] \n\t" @@ -98,20 +90,15 @@ void send_bit_d6(bool bitVal) :: [port] "I" (_SFR_IO_ADDR(PORTD)), [bit] "I" (6), - [onCycles] "I" (NS_TO_CYCLES(T0H) - 2), - [offCycles] "I" (NS_TO_CYCLES(T0L) - 2)); + [onCycles] "I" (NS_TO_CYCLES(LED_T0H) - 2), + [offCycles] "I" (NS_TO_CYCLES(LED_T0L) - 2)); } } -void show(void) -{ - _delay_us((RES / 1000UL) + 1); -} - void send_value(uint8_t byte, enum Device device) { for(uint8_t b = 0; b < 8; b++) { - if(device == Device_STATELED) { + if(device == Device_STATUSLED) { send_bit_d4(byte & 0b10000000); } if(device == Device_PCBRGB) { @@ -123,7 +110,7 @@ void send_value(uint8_t byte, enum Device device) void send_color(uint8_t r, uint8_t g, uint8_t b, enum Device device) { - send_value(g, device); send_value(r, device); + send_value(g, device); send_value(b, device); } diff --git a/keyboards/duck/jetfire/backlight_led.h b/keyboards/duck/jetfire/indicator_leds.h similarity index 70% rename from keyboards/duck/jetfire/backlight_led.h rename to keyboards/duck/jetfire/indicator_leds.h index 36d8d9aa9b3..695e1db6d41 100644 --- a/keyboards/duck/jetfire/backlight_led.h +++ b/keyboards/duck/jetfire/indicator_leds.h @@ -1,10 +1,6 @@ -#ifndef BACKLIGHT_LED_H -#define BACKLIGHT_LED_H +#pragma once -enum Device { - Device_PCBRGB, - Device_STATELED -}; +#include "duck_led/duck_led.h" void backlight_init_ports(void); void backlight_set_state(bool cfg[7]); @@ -13,6 +9,3 @@ void backlight_toggle_rgb(bool enabled); void backlight_set_rgb(uint8_t cfg[17][3]); void backlight_set(uint8_t level); void send_color(uint8_t r, uint8_t g, uint8_t b, enum Device device); -void show(void); - -#endif diff --git a/keyboards/duck/jetfire/jetfire.c b/keyboards/duck/jetfire/jetfire.c index 81bdb95ba1f..0662489c6f2 100644 --- a/keyboards/duck/jetfire/jetfire.c +++ b/keyboards/duck/jetfire/jetfire.c @@ -14,9 +14,9 @@ * along with this program. If not, see . */ #include "jetfire.h" -#include "backlight_led.h" +#include "indicator_leds.h" -enum backlight_level { +enum BACKLIGHT_AREAS { BACKLIGHT_ALPHA = 0b0000001, BACKLIGHT_MOD = 0b0000010, BACKLIGHT_FROW = 0b0000100, @@ -137,15 +137,15 @@ void backlight_update_state() send_color(backlight_state_led & (1<. */ -#ifndef JETFIRE_H -#define JETFIRE_H +#pragma once #include "quantum.h" @@ -57,4 +56,3 @@ { K0A, K0B, K0C, KC_NO,KC_NO,KC_NO,KC_NO,KC_NO, K0I, KC_NO,KC_NO,KC_NO, K0M, K0N, K0O, K0P, K0Q, K0R, K0S, KC_NO } \ } -#endif diff --git a/keyboards/duck/jetfire/readme.md b/keyboards/duck/jetfire/readme.md index 34b351a7266..8de2f5ced6f 100644 --- a/keyboards/duck/jetfire/readme.md +++ b/keyboards/duck/jetfire/readme.md @@ -9,7 +9,7 @@ Keyboard Maintainer: [MechMerlin](https://github.com/mechmerlin) Hardware Supported: Duck Jetfire PCB Hardware Availability: [Geekhack GB](https://geekhack.org/index.php?topic=92708.0) -To get into bootloader mode, hold the top top most key above the 2 navigation keys while connecting the USB cable. +**Reset Key:** To put the Jetfire into reset, hold top most key above the 2 navigation keys (`K5P`) while plugging in. Make example for this keyboard (after setting up your build environment): diff --git a/keyboards/duck/jetfire/rules.mk b/keyboards/duck/jetfire/rules.mk index 8e05516df3d..c708593293a 100644 --- a/keyboards/duck/jetfire/rules.mk +++ b/keyboards/duck/jetfire/rules.mk @@ -51,7 +51,7 @@ OPT_DEFS += -DBOOTLOADER_SIZE=4096 # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) +BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration(+1000) MOUSEKEY_ENABLE = no # Mouse keys(+4700) EXTRAKEY_ENABLE = no # Audio control and System control(+450) CONSOLE_ENABLE = yes # Console for debug(+400) @@ -70,5 +70,5 @@ FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches HD44780_ENABLE = no # Enable support for HD44780 based LCDs (+400) CUSTOM_MATRIX = yes -SRC += backlight_led.c \ - matrix.c +SRC += indicator_leds.c \ + matrix.c duck_led/duck_led.c diff --git a/keyboards/duck/lightsaver/config.h b/keyboards/duck/lightsaver/config.h index 9e3a08fbd1a..d302fb39532 100644 --- a/keyboards/duck/lightsaver/config.h +++ b/keyboards/duck/lightsaver/config.h @@ -15,8 +15,7 @@ You should have received a copy of the GNU General Public License along with this program. If not, see . */ -#ifndef CONFIG_H -#define CONFIG_H +#pragma once #include "config_common.h" @@ -44,6 +43,9 @@ along with this program. If not, see . #define RGB_DI_PIN D6 #define RGBLED_NUM 17 +/* Set to top left most key */ +#define BOOTMAGIC_LITE_ROW 5 +#define BOOTMAGIC_LITE_COLUMN 10 + #define TAPPING_TERM 200 -#endif diff --git a/keyboards/duck/lightsaver/indicator_leds.c b/keyboards/duck/lightsaver/indicator_leds.c index 0a54e151e1d..5d2e1ad9f63 100644 --- a/keyboards/duck/lightsaver/indicator_leds.c +++ b/keyboards/duck/lightsaver/indicator_leds.c @@ -18,17 +18,12 @@ along with this program. If not, see . #include #include #include +#include "duck_led/duck_led.h" -#define T1H 900 -#define T1L 600 -#define T0H 400 -#define T0L 900 -#define RES 6000 - -#define NS_PER_SEC (1000000000L) -#define CYCLES_PER_SEC (F_CPU) -#define NS_PER_CYCLE (NS_PER_SEC / CYCLES_PER_SEC) -#define NS_TO_CYCLES(n) ((n) / NS_PER_CYCLE) +#define LED_T1H 900 +#define LED_T1L 600 +#define LED_T0H 400 +#define LED_T0L 900 void send_bit_d4(bool bitVal) { if(bitVal) { @@ -44,8 +39,8 @@ void send_bit_d4(bool bitVal) { :: [port] "I" (_SFR_IO_ADDR(PORTD)), [bit] "I" (4), - [onCycles] "I" (NS_TO_CYCLES(T1H) - 2), - [offCycles] "I" (NS_TO_CYCLES(T1L) - 2)); + [onCycles] "I" (NS_TO_CYCLES(LED_T1H) - 2), + [offCycles] "I" (NS_TO_CYCLES(LED_T1L) - 2)); } else { asm volatile ( "sbi %[port], %[bit] \n\t" @@ -59,33 +54,31 @@ void send_bit_d4(bool bitVal) { :: [port] "I" (_SFR_IO_ADDR(PORTD)), [bit] "I" (4), - [onCycles] "I" (NS_TO_CYCLES(T0H) - 2), - [offCycles] "I" (NS_TO_CYCLES(T0L) - 2)); + [onCycles] "I" (NS_TO_CYCLES(LED_T0H) - 2), + [offCycles] "I" (NS_TO_CYCLES(LED_T0L) - 2)); } } -void show(void) { - _delay_us((RES / 1000UL) + 1); -} - -void send_value(uint8_t byte) { +void send_value(uint8_t byte, enum Device device) { for(uint8_t b = 0; b < 8; b++) { - send_bit_d4(byte & 0b10000000); - byte <<= 1; + if(device == Device_STATUSLED) { + send_bit_d4(byte & 0b10000000); + byte <<= 1; + } } } -void send_color(uint8_t r, uint8_t g, uint8_t b) { - send_value(g); - send_value(r); - send_value(b); +void send_color(uint8_t r, uint8_t g, uint8_t b, enum Device device) { + send_value(r, device); + send_value(g, device); + send_value(b, device); } void indicator_leds_set(bool leds[8]) { cli(); - send_color(leds[1] ? 255 : 0, leds[2] ? 255 : 0, leds[0] ? 255 : 0); - send_color(leds[4] ? 255 : 0, leds[5] ? 255 : 0, leds[3] ? 255 : 0); - send_color(leds[6] ? 255 : 0, leds[7] ? 255 : 0, 0); + send_color(leds[1] ? 255 : 0, leds[2] ? 255 : 0, leds[0] ? 255 : 0, Device_STATUSLED); + send_color(leds[4] ? 255 : 0, leds[5] ? 255 : 0, leds[3] ? 255 : 0, Device_STATUSLED); + send_color(leds[6] ? 255 : 0, leds[7] ? 255 : 0, 0, Device_STATUSLED); sei(); show(); } diff --git a/keyboards/duck/lightsaver/lightsaver.h b/keyboards/duck/lightsaver/lightsaver.h index 19fcf36bacb..1e1185713b1 100644 --- a/keyboards/duck/lightsaver/lightsaver.h +++ b/keyboards/duck/lightsaver/lightsaver.h @@ -13,8 +13,7 @@ * You should have received a copy of the GNU General Public License * along with this program. If not, see . */ -#ifndef LIGHTSAVER_H -#define LIGHTSAVER_H +#pragma once #include "quantum.h" @@ -37,4 +36,3 @@ /* 5 */ { K0A, K0B, K0C, NO, NO, NO, NO, NO, K0I, NO, K0K, NO, K0M, K0N, K0O, K0P, K0Q, K0R } \ } -#endif diff --git a/keyboards/duck/lightsaver/matrix.c b/keyboards/duck/lightsaver/matrix.c index a07cdd0d161..543205c0b78 100644 --- a/keyboards/duck/lightsaver/matrix.c +++ b/keyboards/duck/lightsaver/matrix.c @@ -87,6 +87,9 @@ uint8_t matrix_scan(void) { bool curr_bit = rows & (1<. */ -#ifndef CONFIG_H -#define CONFIG_H +#pragma once #include "config_common.h" @@ -44,6 +43,8 @@ along with this program. If not, see . #define RGB_DI_PIN D6 #define RGBLED_NUM 17 -#define TAPPING_TERM 200 +/* Set to top left most key */ +#define BOOTMAGIC_LITE_ROW 5 +#define BOOTMAGIC_LITE_COLUMN 10 -#endif +#define TAPPING_TERM 200 diff --git a/keyboards/duck/octagon/v1/matrix.c b/keyboards/duck/octagon/v1/matrix.c index 8555349943c..233404ed30f 100644 --- a/keyboards/duck/octagon/v1/matrix.c +++ b/keyboards/duck/octagon/v1/matrix.c @@ -84,6 +84,9 @@ uint8_t matrix_scan(void) { bool curr_bit = rows & (1<. */ -#ifndef V1_H -#define V1_H +#pragma once #include "quantum.h" @@ -49,4 +48,3 @@ { K1A, K1C, K1D, K1E, K1F, K1G, K1H, K1I, K1J, K1K, K1L, KC_NO, K1M, K1N, KC_NO, K1P }, \ { K0A, K0B, K0C, KC_NO, KC_NO, K0G, KC_NO, KC_NO, K0J, K0K, K0L, KC_NO, K0M, K0N, KC_NO, K0P } \ } -#endif diff --git a/keyboards/duck/octagon/v2/config.h b/keyboards/duck/octagon/v2/config.h index 78d18d3bb3b..4aab587f663 100644 --- a/keyboards/duck/octagon/v2/config.h +++ b/keyboards/duck/octagon/v2/config.h @@ -15,8 +15,7 @@ You should have received a copy of the GNU General Public License along with this program. If not, see . */ -#ifndef CONFIG_H -#define CONFIG_H +#pragma once #include "config_common.h" @@ -44,6 +43,9 @@ along with this program. If not, see . #define RGB_DI_PIN D6 #define RGBLED_NUM 17 +/* Set to top left most key */ +#define BOOTMAGIC_LITE_ROW 5 +#define BOOTMAGIC_LITE_COLUMN 10 + #define TAPPING_TERM 200 -#endif diff --git a/keyboards/duck/octagon/v2/indicator_leds.c b/keyboards/duck/octagon/v2/indicator_leds.c index c24509f5144..116306fb712 100644 --- a/keyboards/duck/octagon/v2/indicator_leds.c +++ b/keyboards/duck/octagon/v2/indicator_leds.c @@ -20,16 +20,10 @@ along with this program. If not, see . #include #include "indicator_leds.h" -#define T1H 900 -#define T1L 600 -#define T0H 400 -#define T0L 900 -#define RES 6000 - -#define NS_PER_SEC (1000000000L) -#define CYCLES_PER_SEC (F_CPU) -#define NS_PER_CYCLE (NS_PER_SEC / CYCLES_PER_SEC) -#define NS_TO_CYCLES(n) ((n) / NS_PER_CYCLE) +#define LED_T1H 900 +#define LED_T1L 600 +#define LED_T0H 400 +#define LED_T0L 900 void send_bit_d4(bool bitVal) { if(bitVal) { @@ -45,8 +39,8 @@ void send_bit_d4(bool bitVal) { :: [port] "I" (_SFR_IO_ADDR(PORTD)), [bit] "I" (4), - [onCycles] "I" (NS_TO_CYCLES(T1H) - 2), - [offCycles] "I" (NS_TO_CYCLES(T1L) - 2)); + [onCycles] "I" (NS_TO_CYCLES(LED_T1H) - 2), + [offCycles] "I" (NS_TO_CYCLES(LED_T1L) - 2)); } else { asm volatile ( "sbi %[port], %[bit] \n\t" @@ -60,8 +54,8 @@ void send_bit_d4(bool bitVal) { :: [port] "I" (_SFR_IO_ADDR(PORTD)), [bit] "I" (4), - [onCycles] "I" (NS_TO_CYCLES(T0H) - 2), - [offCycles] "I" (NS_TO_CYCLES(T0L) - 2)); + [onCycles] "I" (NS_TO_CYCLES(LED_T0H) - 2), + [offCycles] "I" (NS_TO_CYCLES(LED_T0L) - 2)); } } @@ -80,8 +74,8 @@ void send_bit_d6(bool bitVal) :: [port] "I" (_SFR_IO_ADDR(PORTD)), [bit] "I" (6), - [onCycles] "I" (NS_TO_CYCLES(T1H) - 2), - [offCycles] "I" (NS_TO_CYCLES(T1L) - 2)); + [onCycles] "I" (NS_TO_CYCLES(LED_T1H) - 2), + [offCycles] "I" (NS_TO_CYCLES(LED_T1L) - 2)); } else { asm volatile ( "sbi %[port], %[bit] \n\t" @@ -95,15 +89,11 @@ void send_bit_d6(bool bitVal) :: [port] "I" (_SFR_IO_ADDR(PORTD)), [bit] "I" (6), - [onCycles] "I" (NS_TO_CYCLES(T0H) - 2), - [offCycles] "I" (NS_TO_CYCLES(T0L) - 2)); + [onCycles] "I" (NS_TO_CYCLES(LED_T0H) - 2), + [offCycles] "I" (NS_TO_CYCLES(LED_T0L) - 2)); } } -void show(void) { - _delay_us((RES / 1000UL) + 1); -} - void send_value(uint8_t byte, enum Device device) { for(uint8_t b = 0; b < 8; b++) { if(device == Device_STATUSLED) { @@ -117,8 +107,8 @@ void send_value(uint8_t byte, enum Device device) { } void send_color(uint8_t r, uint8_t g, uint8_t b, enum Device device) { - send_value(g, device); send_value(r, device); + send_value(g, device); send_value(b, device); } diff --git a/keyboards/duck/octagon/v2/indicator_leds.h b/keyboards/duck/octagon/v2/indicator_leds.h index 9bb2c8ced93..ad3ec54f52a 100644 --- a/keyboards/duck/octagon/v2/indicator_leds.h +++ b/keyboards/duck/octagon/v2/indicator_leds.h @@ -1,11 +1,7 @@ -enum Device { - Device_PCBRGB, - Device_STATUSLED -}; +#include "duck_led/duck_led.h" void indicator_leds_set(bool leds[8]); void backlight_toggle_rgb(bool enabled); void backlight_set_rgb(uint8_t cfg[17][3]); void backlight_init_ports(void); void send_color(uint8_t r, uint8_t g, uint8_t b, enum Device device); -void show(void); \ No newline at end of file diff --git a/keyboards/duck/octagon/v2/matrix.c b/keyboards/duck/octagon/v2/matrix.c index a63a37640ff..e6e7046b45b 100644 --- a/keyboards/duck/octagon/v2/matrix.c +++ b/keyboards/duck/octagon/v2/matrix.c @@ -89,6 +89,9 @@ uint8_t matrix_scan(void) { bool curr_bit = rows & (1<. */ -#ifndef V2_H -#define V2_H +#pragma once #include "quantum.h" @@ -49,4 +48,3 @@ { K1A, KC_NO, K1C, K1D, K1E, K1F, K1G, K1H, K1I, K1J, K1K, KC_NO, K1M, K1N, K1O, K1P, KC_NO }, \ { K0A, K0B, K0C, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, K0J, KC_NO, K0K, K0L, K0M, K0N, K0O, K0P, KC_NO } \ } -#endif From eb0bbe997b30f1e6fba1d95adb25d2af04302021 Mon Sep 17 00:00:00 2001 From: Wilba6582 Date: Wed, 3 Apr 2019 23:54:34 +1100 Subject: [PATCH 018/171] Added configurable defaults for RGB backlight indicators. --- keyboards/hs60/v2/config.h | 5 +++++ keyboards/zeal60/config.h | 5 +++++ keyboards/zeal60/rgb_backlight.c | 8 ++++---- keyboards/zeal65/config.h | 5 +++++ 4 files changed, 19 insertions(+), 4 deletions(-) diff --git a/keyboards/hs60/v2/config.h b/keyboards/hs60/v2/config.h index b0c56adf891..bbf17251b4e 100644 --- a/keyboards/hs60/v2/config.h +++ b/keyboards/hs60/v2/config.h @@ -119,6 +119,11 @@ along with this program. If not, see . #define RGB_BACKLIGHT_ALPHAS_MODS_ROW_3 0b0010000000000001 #define RGB_BACKLIGHT_ALPHAS_MODS_ROW_4 0b0011110000000111 +#define RGB_BACKLIGHT_CAPS_LOCK_INDICATOR { .color = { .h = 0, .s = 0 }, .index = 255 } +#define RGB_BACKLIGHT_LAYER_1_INDICATOR { .color = { .h = 0, .s = 0 }, .index = 255 } +#define RGB_BACKLIGHT_LAYER_2_INDICATOR { .color = { .h = 0, .s = 0 }, .index = 255 } +#define RGB_BACKLIGHT_LAYER_3_INDICATOR { .color = { .h = 0, .s = 0 }, .index = 255 } + // TODO: refactor with new user EEPROM code (coming soon) #define EEPROM_MAGIC 0x451F #define EEPROM_MAGIC_ADDR 32 diff --git a/keyboards/zeal60/config.h b/keyboards/zeal60/config.h index e39b06cf6b2..94cc9989b74 100644 --- a/keyboards/zeal60/config.h +++ b/keyboards/zeal60/config.h @@ -100,6 +100,11 @@ #define RGB_BACKLIGHT_ALPHAS_MODS_ROW_3 0b0011000000000001 #define RGB_BACKLIGHT_ALPHAS_MODS_ROW_4 0b0011110000000111 +#define RGB_BACKLIGHT_CAPS_LOCK_INDICATOR { .color = { .h = 0, .s = 0 }, .index = 255 } +#define RGB_BACKLIGHT_LAYER_1_INDICATOR { .color = { .h = 0, .s = 0 }, .index = 255 } +#define RGB_BACKLIGHT_LAYER_2_INDICATOR { .color = { .h = 0, .s = 0 }, .index = 255 } +#define RGB_BACKLIGHT_LAYER_3_INDICATOR { .color = { .h = 0, .s = 0 }, .index = 255 } + #define DYNAMIC_KEYMAP_LAYER_COUNT 4 // EEPROM usage diff --git a/keyboards/zeal60/rgb_backlight.c b/keyboards/zeal60/rgb_backlight.c index a965a13bbdf..8d7a7fe8d10 100644 --- a/keyboards/zeal60/rgb_backlight.c +++ b/keyboards/zeal60/rgb_backlight.c @@ -74,10 +74,10 @@ backlight_config g_config = { .effect_speed = 0, .color_1 = { .h = 0, .s = 255 }, .color_2 = { .h = 127, .s = 255 }, - .caps_lock_indicator = { .color = { .h = 0, .s = 0 }, .index = 255 }, - .layer_1_indicator = { .color = { .h = 0, .s = 0 }, .index = 255 }, - .layer_2_indicator = { .color = { .h = 0, .s = 0 }, .index = 255 }, - .layer_3_indicator = { .color = { .h = 0, .s = 0 }, .index = 255 }, + .caps_lock_indicator = RGB_BACKLIGHT_CAPS_LOCK_INDICATOR, + .layer_1_indicator = RGB_BACKLIGHT_LAYER_1_INDICATOR, + .layer_2_indicator = RGB_BACKLIGHT_LAYER_2_INDICATOR, + .layer_3_indicator = RGB_BACKLIGHT_LAYER_3_INDICATOR, .alphas_mods = { RGB_BACKLIGHT_ALPHAS_MODS_ROW_0, RGB_BACKLIGHT_ALPHAS_MODS_ROW_1, diff --git a/keyboards/zeal65/config.h b/keyboards/zeal65/config.h index 7406be865b0..896deac8b8b 100644 --- a/keyboards/zeal65/config.h +++ b/keyboards/zeal65/config.h @@ -100,6 +100,11 @@ #define RGB_BACKLIGHT_ALPHAS_MODS_ROW_3 0b0111000000000001 #define RGB_BACKLIGHT_ALPHAS_MODS_ROW_4 0b0111110000000011 +#define RGB_BACKLIGHT_CAPS_LOCK_INDICATOR { .color = { .h = 0, .s = 0 }, .index = 255 } +#define RGB_BACKLIGHT_LAYER_1_INDICATOR { .color = { .h = 0, .s = 0 }, .index = 255 } +#define RGB_BACKLIGHT_LAYER_2_INDICATOR { .color = { .h = 0, .s = 0 }, .index = 255 } +#define RGB_BACKLIGHT_LAYER_3_INDICATOR { .color = { .h = 0, .s = 0 }, .index = 255 } + #define DYNAMIC_KEYMAP_LAYER_COUNT 4 // EEPROM usage From 17e7762de7e3fdfc61c20aa61022f47370630c6a Mon Sep 17 00:00:00 2001 From: Alex Ong Date: Thu, 4 Apr 2019 08:45:55 +1100 Subject: [PATCH 019/171] Eager Per Row Debouncing added (added to Ergodox) (#5498) * Implemented Eager Per Row debouncing algorithm. Good for when fingers can only press one row at a time (e.g. when keyboard is wired so that "rows" are vertical) * Added documentation for eager_pr * Ported ergodox_ez to eager_pr debouncing. * Removed check for changes in matrix_scan. * Added further clarification in docs. * Accidental merge with ergodox_ez * Small cleanup in eager_pr * Forgot to debounce_init - this would probably cause seg-faults. --- docs/feature_debounce_type.md | 5 +- keyboards/ergodox_ez/matrix.c | 454 +++++++++++++++------------------- keyboards/ergodox_ez/rules.mk | 1 + quantum/debounce/eager_pr.c | 100 ++++++++ quantum/debounce/readme.md | 2 +- 5 files changed, 300 insertions(+), 262 deletions(-) create mode 100644 quantum/debounce/eager_pr.c diff --git a/docs/feature_debounce_type.md b/docs/feature_debounce_type.md index 5d4343f08b9..38eca3f37c8 100644 --- a/docs/feature_debounce_type.md +++ b/docs/feature_debounce_type.md @@ -33,7 +33,10 @@ The debounce code is compatible with split keyboards. # Changing between included debouncing methods You can either use your own code, by including your own debounce.c, or switch to another included one. Included debounce methods are: -* eager_pk - debouncing per key. On any state change, response is immediate, followed by ```DEBOUNCE_DELAY``` millseconds of no further input for that key +* eager_pr - debouncing per row. On any state change, response is immediate, followed by locking the row ```DEBOUNCE_DELAY``` milliseconds of no further input for that row. +For use in keyboards where refreshing ```NUM_KEYS``` 8-bit counters is computationally expensive / low scan rate, and fingers usually only hit one row at a time. This could be +appropriate for the ErgoDox models; the matrix is rotated 90°, and hence its "rows" are really columns, and each finger only hits a single "row" at a time in normal use. +* eager_pk - debouncing per key. On any state change, response is immediate, followed by ```DEBOUNCE_DELAY``` milliseconds of no further input for that key * sym_g - debouncing per keyboard. On any state change, a global timer is set. When ```DEBOUNCE_DELAY``` milliseconds of no changes has occured, all input changes are pushed. diff --git a/keyboards/ergodox_ez/matrix.c b/keyboards/ergodox_ez/matrix.c index 860cf7b229a..97f764113b2 100644 --- a/keyboards/ergodox_ez/matrix.c +++ b/keyboards/ergodox_ez/matrix.c @@ -33,14 +33,14 @@ along with this program. If not, see . #include "debug.h" #include "util.h" #include "matrix.h" +#include "debounce.h" #include QMK_KEYBOARD_H #ifdef DEBUG_MATRIX_SCAN_RATE -#include "timer.h" +# include "timer.h" #endif /* - * This constant define not debouncing time in msecs, but amount of matrix - * scan loops which should be made to get stable debounced results. + * This constant define not debouncing time in msecs, assuming eager_pr. * * On Ergodox matrix scan rate is relatively low, because of slow I2C. * Now it's only 317 scans/second, or about 3.15 msec/scan. @@ -52,26 +52,17 @@ along with this program. If not, see . */ #ifndef DEBOUNCE -# define DEBOUNCE 5 +# define DEBOUNCE 5 #endif /* matrix state(1:on, 0:off) */ -static matrix_row_t matrix[MATRIX_ROWS]; -/* - * matrix state(1:on, 0:off) - * contains the raw values without debounce filtering of the last read cycle. - */ -static matrix_row_t raw_matrix[MATRIX_ROWS]; - -// Debouncing: store for each key the number of scans until it's eligible to -// change. When scanning the matrix, ignore any changes in keys that have -// already changed in the last DEBOUNCE scans. -static uint8_t debounce_matrix[MATRIX_ROWS * MATRIX_COLS]; +static matrix_row_t raw_matrix[MATRIX_ROWS]; // raw values +static matrix_row_t matrix[MATRIX_ROWS]; // debounced values static matrix_row_t read_cols(uint8_t row); -static void init_cols(void); -static void unselect_rows(void); -static void select_row(uint8_t row); +static void init_cols(void); +static void unselect_rows(void); +static void select_row(uint8_t row); static uint8_t mcp23018_reset_loop; // static uint16_t mcp23018_reset_loop; @@ -81,197 +72,137 @@ uint32_t matrix_timer; uint32_t matrix_scan_count; #endif +__attribute__((weak)) void matrix_init_user(void) {} -__attribute__ ((weak)) -void matrix_init_user(void) {} +__attribute__((weak)) void matrix_scan_user(void) {} -__attribute__ ((weak)) -void matrix_scan_user(void) {} +__attribute__((weak)) void matrix_init_kb(void) { matrix_init_user(); } -__attribute__ ((weak)) -void matrix_init_kb(void) { - matrix_init_user(); -} +__attribute__((weak)) void matrix_scan_kb(void) { matrix_scan_user(); } -__attribute__ ((weak)) -void matrix_scan_kb(void) { - matrix_scan_user(); -} +inline uint8_t matrix_rows(void) { return MATRIX_ROWS; } -inline -uint8_t matrix_rows(void) -{ - return MATRIX_ROWS; -} +inline uint8_t matrix_cols(void) { return MATRIX_COLS; } -inline -uint8_t matrix_cols(void) -{ - return MATRIX_COLS; -} +void matrix_init(void) { + // initialize row and col -void matrix_init(void) -{ - // initialize row and col + mcp23018_status = init_mcp23018(); - mcp23018_status = init_mcp23018(); + unselect_rows(); + init_cols(); - - unselect_rows(); - init_cols(); - - // initialize matrix state: all keys off - for (uint8_t i=0; i < MATRIX_ROWS; i++) { - matrix[i] = 0; - raw_matrix[i] = 0; - for (uint8_t j=0; j < MATRIX_COLS; ++j) { - debounce_matrix[i * MATRIX_COLS + j] = 0; - } - } + // initialize matrix state: all keys off + for (uint8_t i = 0; i < MATRIX_ROWS; i++) { + matrix[i] = 0; + raw_matrix[i] = 0; + } #ifdef DEBUG_MATRIX_SCAN_RATE - matrix_timer = timer_read32(); - matrix_scan_count = 0; + matrix_timer = timer_read32(); + matrix_scan_count = 0; #endif - - matrix_init_quantum(); - + debounce_init(MATRIX_ROWS); + matrix_init_quantum(); } void matrix_power_up(void) { - mcp23018_status = init_mcp23018(); + mcp23018_status = init_mcp23018(); - unselect_rows(); - init_cols(); + unselect_rows(); + init_cols(); - // initialize matrix state: all keys off - for (uint8_t i=0; i < MATRIX_ROWS; i++) { - matrix[i] = 0; - } + // initialize matrix state: all keys off + for (uint8_t i = 0; i < MATRIX_ROWS; i++) { + matrix[i] = 0; + } #ifdef DEBUG_MATRIX_SCAN_RATE - matrix_timer = timer_read32(); - matrix_scan_count = 0; + matrix_timer = timer_read32(); + matrix_scan_count = 0; #endif } -// Returns a matrix_row_t whose bits are set if the corresponding key should be -// eligible to change in this scan. -matrix_row_t debounce_mask(matrix_row_t rawcols, uint8_t row) { - matrix_row_t result = 0; - matrix_row_t change = rawcols ^ raw_matrix[row]; - raw_matrix[row] = rawcols; - for (uint8_t i = 0; i < MATRIX_COLS; ++i) { - if (debounce_matrix[row * MATRIX_COLS + i]) { - --debounce_matrix[row * MATRIX_COLS + i]; - } else { - result |= (1 << i); - } - if (change & (1 << i)) { - debounce_matrix[row * MATRIX_COLS + i] = DEBOUNCE; +uint8_t matrix_scan(void) { + if (mcp23018_status) { // if there was an error + if (++mcp23018_reset_loop == 0) { + // if (++mcp23018_reset_loop >= 1300) { + // since mcp23018_reset_loop is 8 bit - we'll try to reset once in 255 matrix scans + // this will be approx bit more frequent than once per second + print("trying to reset mcp23018\n"); + mcp23018_status = init_mcp23018(); + if (mcp23018_status) { + print("left side not responding\n"); + } else { + print("left side attached\n"); + ergodox_blink_all_leds(); + } } } - return result; -} - -matrix_row_t debounce_read_cols(uint8_t row) { - // Read the row without debouncing filtering and store it for later usage. - matrix_row_t cols = read_cols(row); - // Get the Debounce mask. - matrix_row_t mask = debounce_mask(cols, row); - // debounce the row and return the result. - return (cols & mask) | (matrix[row] & ~mask);; -} - -uint8_t matrix_scan(void) -{ - if (mcp23018_status) { // if there was an error - if (++mcp23018_reset_loop == 0) { - // if (++mcp23018_reset_loop >= 1300) { - // since mcp23018_reset_loop is 8 bit - we'll try to reset once in 255 matrix scans - // this will be approx bit more frequent than once per second - print("trying to reset mcp23018\n"); - mcp23018_status = init_mcp23018(); - if (mcp23018_status) { - print("left side not responding\n"); - } else { - print("left side attached\n"); - ergodox_blink_all_leds(); - } - } - } #ifdef DEBUG_MATRIX_SCAN_RATE - matrix_scan_count++; + matrix_scan_count++; - uint32_t timer_now = timer_read32(); - if (TIMER_DIFF_32(timer_now, matrix_timer)>1000) { - print("matrix scan frequency: "); - pdec(matrix_scan_count); - print("\n"); + uint32_t timer_now = timer_read32(); + if (TIMER_DIFF_32(timer_now, matrix_timer) > 1000) { + print("matrix scan frequency: "); + pdec(matrix_scan_count); + print("\n"); - matrix_timer = timer_now; - matrix_scan_count = 0; - } + matrix_timer = timer_now; + matrix_scan_count = 0; + } #endif #ifdef LEFT_LEDS - mcp23018_status = ergodox_left_leds_update(); -#endif // LEFT_LEDS - for (uint8_t i = 0; i < MATRIX_ROWS_PER_SIDE; i++) { - select_row(i); - // and select on left hand - select_row(i + MATRIX_ROWS_PER_SIDE); - // we don't need a 30us delay anymore, because selecting a - // left-hand row requires more than 30us for i2c. + mcp23018_status = ergodox_left_leds_update(); +#endif // LEFT_LEDS + for (uint8_t i = 0; i < MATRIX_ROWS_PER_SIDE; i++) { + // select rows from left and right hands + select_row(i); + select_row(i + MATRIX_ROWS_PER_SIDE); - // grab cols from left hand - matrix[i] = debounce_read_cols(i); - // grab cols from right hand - matrix[i + MATRIX_ROWS_PER_SIDE] = debounce_read_cols(i + MATRIX_ROWS_PER_SIDE); + // we don't need a 30us delay anymore, because selecting a + // left-hand row requires more than 30us for i2c. - unselect_rows(); - } + // grab left + right cols. + raw_matrix[i] = read_cols(i); + raw_matrix[i+MATRIX_ROWS_PER_SIDE] = read_cols(i+MATRIX_ROWS_PER_SIDE); + + unselect_rows(); + } + + debounce(raw_matrix, matrix, MATRIX_ROWS, true); + matrix_scan_quantum(); - matrix_scan_quantum(); - - return 1; + return 1; } -bool matrix_is_modified(void) // deprecated and evidently not called. +bool matrix_is_modified(void) // deprecated and evidently not called. { - return true; + return true; } -inline -bool matrix_is_on(uint8_t row, uint8_t col) -{ - return (matrix[row] & ((matrix_row_t)1<> 2)); + uint8_t data = 0; + mcp23018_status = i2c_start(I2C_ADDR_WRITE, ERGODOX_EZ_I2C_TIMEOUT); + if (mcp23018_status) goto out; + mcp23018_status = i2c_write(GPIOB, ERGODOX_EZ_I2C_TIMEOUT); + if (mcp23018_status) goto out; + mcp23018_status = i2c_start(I2C_ADDR_READ, ERGODOX_EZ_I2C_TIMEOUT); + if (mcp23018_status) goto out; + mcp23018_status = i2c_read_nack(ERGODOX_EZ_I2C_TIMEOUT); + if (mcp23018_status < 0) goto out; + data = ~((uint8_t)mcp23018_status); + mcp23018_status = I2C_STATUS_SUCCESS; + out: + i2c_stop(); + return data; } + } else { + /* read from teensy + * bitmask is 0b11110011, but we want those all + * in the lower six bits. + * we'll return 1s for the top two, but that's harmless. + */ + + return ~((PINF & 0x03) | ((PINF & 0xF0) >> 2)); + } } /* Row pin configuration @@ -333,69 +266,70 @@ static matrix_row_t read_cols(uint8_t row) * row: 0 1 2 3 4 5 6 * pin: A0 A1 A2 A3 A4 A5 A6 */ -static void unselect_rows(void) -{ - // no need to unselect on mcp23018, because the select step sets all - // the other row bits high, and it's not changing to a different - // direction +static void unselect_rows(void) { + // no need to unselect on mcp23018, because the select step sets all + // the other row bits high, and it's not changing to a different + // direction - // unselect on teensy - // Hi-Z(DDR:0, PORT:0) to unselect - DDRB &= ~(1<<0 | 1<<1 | 1<<2 | 1<<3); - PORTB &= ~(1<<0 | 1<<1 | 1<<2 | 1<<3); - DDRD &= ~(1<<2 | 1<<3); - PORTD &= ~(1<<2 | 1<<3); - DDRC &= ~(1<<6); - PORTC &= ~(1<<6); + // unselect on teensy + // Hi-Z(DDR:0, PORT:0) to unselect + DDRB &= ~(1 << 0 | 1 << 1 | 1 << 2 | 1 << 3); + PORTB &= ~(1 << 0 | 1 << 1 | 1 << 2 | 1 << 3); + DDRD &= ~(1 << 2 | 1 << 3); + PORTD &= ~(1 << 2 | 1 << 3); + DDRC &= ~(1 << 6); + PORTC &= ~(1 << 6); } -static void select_row(uint8_t row) -{ - if (row < 7) { - // select on mcp23018 - if (mcp23018_status) { // if there was an error - // do nothing - } else { - // set active row low : 0 - // set other rows hi-Z : 1 - mcp23018_status = i2c_start(I2C_ADDR_WRITE, ERGODOX_EZ_I2C_TIMEOUT); if (mcp23018_status) goto out; - mcp23018_status = i2c_write(GPIOA, ERGODOX_EZ_I2C_TIMEOUT); if (mcp23018_status) goto out; - mcp23018_status = i2c_write(0xFF & ~(1< +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +/* +Basic per-row algorithm. Uses an 8-bit counter per row. +After pressing a key, it immediately changes state, and sets a counter. +No further inputs are accepted until DEBOUNCE milliseconds have occurred. +*/ + +#include "matrix.h" +#include "timer.h" +#include "quantum.h" +#include + +#ifndef DEBOUNCE + #define DEBOUNCE 5 +#endif + + +#define debounce_counter_t uint8_t + +static debounce_counter_t *debounce_counters; + +#define DEBOUNCE_ELAPSED 251 +#define MAX_DEBOUNCE (DEBOUNCE_ELAPSED - 1) + +void update_debounce_counters(uint8_t num_rows, uint8_t current_time); +void transfer_matrix_values(matrix_row_t raw[], matrix_row_t cooked[], uint8_t num_rows, uint8_t current_time); + +//we use num_rows rather than MATRIX_ROWS to support split keyboards +void debounce_init(uint8_t num_rows) +{ + debounce_counters = (debounce_counter_t*)malloc(num_rows*sizeof(debounce_counter_t)); + for (uint8_t r = 0; r < num_rows; r++) + { + debounce_counters[r] = DEBOUNCE_ELAPSED; + } +} + +void debounce(matrix_row_t raw[], matrix_row_t cooked[], uint8_t num_rows, bool changed) +{ + uint8_t current_time = timer_read() % MAX_DEBOUNCE; + update_debounce_counters(num_rows, current_time); + transfer_matrix_values(raw, cooked, num_rows, current_time); +} + +//If the current time is > debounce counter, set the counter to enable input. +void update_debounce_counters(uint8_t num_rows, uint8_t current_time) +{ + debounce_counter_t *debounce_pointer = debounce_counters; + for (uint8_t row = 0; row < num_rows; row++) + { + if (*debounce_pointer != DEBOUNCE_ELAPSED) + { + if (TIMER_DIFF(current_time, *debounce_pointer, MAX_DEBOUNCE) >= DEBOUNCE) { + *debounce_pointer = DEBOUNCE_ELAPSED; + } + } + debounce_pointer++; + } +} + +// upload from raw_matrix to final matrix; +void transfer_matrix_values(matrix_row_t raw[], matrix_row_t cooked[], uint8_t num_rows, uint8_t current_time) +{ + debounce_counter_t *debounce_pointer = debounce_counters; + for (uint8_t row = 0; row < num_rows; row++) + { + matrix_row_t existing_row = cooked[row]; + matrix_row_t raw_row = raw[row]; + + //determine new value basd on debounce pointer + raw value + if (*debounce_pointer == DEBOUNCE_ELAPSED && + (existing_row != raw_row)) + { + *debounce_pointer = current_time; + existing_row = raw_row; + } + cooked[row] = existing_row; + + debounce_pointer++; + } +} + +bool debounce_active(void) +{ + return true; +} + diff --git a/quantum/debounce/readme.md b/quantum/debounce/readme.md index 5b318d845e9..f77f78c764f 100644 --- a/quantum/debounce/readme.md +++ b/quantum/debounce/readme.md @@ -22,7 +22,7 @@ Here are a few that could be implemented: sym_g.c sym_pk.c sym_pr.c -sym_pr_cycles.c //currently used in ergo-dox +sym_pr_cycles.c eager_g.c eager_pk.c eager_pr.c //could be used in ergo-dox! From 63177760deaf23bb1f676974cecf211676285604 Mon Sep 17 00:00:00 2001 From: XScorpion2 Date: Wed, 3 Apr 2019 18:01:17 -0500 Subject: [PATCH 020/171] Added encoder support to split common code (#5477) * Added slave encoder support to split common * Fixing handwired/xealous/rev1 compile error * Removed unnecessary ifdef --- quantum/encoder.c | 33 +++++++++++++- quantum/encoder.h | 8 ++-- quantum/split_common/matrix.c | 7 +++ quantum/split_common/transport.c | 77 ++++++++++++++++++++++++++------ 4 files changed, 106 insertions(+), 19 deletions(-) diff --git a/quantum/encoder.c b/quantum/encoder.c index 6629a098b86..ddf6234ab8a 100644 --- a/quantum/encoder.c +++ b/quantum/encoder.c @@ -17,6 +17,10 @@ #include "encoder.h" +// for memcpy +#include + + #ifndef ENCODER_RESOLUTION #define ENCODER_RESOLUTION 4 #endif @@ -35,7 +39,13 @@ static pin_t encoders_pad_b[NUMBER_OF_ENCODERS] = ENCODERS_PAD_B; static int8_t encoder_LUT[] = { 0, -1, 1, 0, 1, 0, 0, -1, -1, 0, 0, 1, 0, 1, -1, 0 }; static uint8_t encoder_state[NUMBER_OF_ENCODERS] = {0}; + +#ifdef SPLIT_KEYBOARD +// slave half encoders come over as second set of encoders +static int8_t encoder_value[NUMBER_OF_ENCODERS * 2] = {0}; +#else static int8_t encoder_value[NUMBER_OF_ENCODERS] = {0}; +#endif __attribute__ ((weak)) void encoder_update_user(int8_t index, bool clockwise) { } @@ -60,11 +70,30 @@ void encoder_read(void) { encoder_state[i] |= (readPin(encoders_pad_a[i]) << 0) | (readPin(encoders_pad_b[i]) << 1); encoder_value[i] += encoder_LUT[encoder_state[i] & 0xF]; if (encoder_value[i] >= ENCODER_RESOLUTION) { - encoder_update_kb(i, COUNTRECLOCKWISE); + encoder_update_kb(i, false); } if (encoder_value[i] <= -ENCODER_RESOLUTION) { // direction is arbitrary here, but this clockwise - encoder_update_kb(i, CLOCKWISE); + encoder_update_kb(i, true); } encoder_value[i] %= ENCODER_RESOLUTION; } } + +#ifdef SPLIT_KEYBOARD +void encoder_state_raw(uint8_t* slave_state) { + memcpy(slave_state, encoder_state, sizeof(encoder_state)); +} + +void encoder_update_raw(uint8_t* slave_state) { + for (int i = 0; i < NUMBER_OF_ENCODERS; i++) { + encoder_value[NUMBER_OF_ENCODERS + i] += encoder_LUT[slave_state[i] & 0xF]; + if (encoder_value[NUMBER_OF_ENCODERS + i] >= ENCODER_RESOLUTION) { + encoder_update_kb(NUMBER_OF_ENCODERS + i, false); + } + if (encoder_value[NUMBER_OF_ENCODERS + i] <= -ENCODER_RESOLUTION) { // direction is arbitrary here, but this clockwise + encoder_update_kb(NUMBER_OF_ENCODERS + i, true); + } + encoder_value[NUMBER_OF_ENCODERS + i] %= ENCODER_RESOLUTION; + } +} +#endif diff --git a/quantum/encoder.h b/quantum/encoder.h index 2024fa303f3..ec09a8cc475 100644 --- a/quantum/encoder.h +++ b/quantum/encoder.h @@ -19,11 +19,13 @@ #include "quantum.h" -#define COUNTRECLOCKWISE 0 -#define CLOCKWISE 1 - void encoder_init(void); void encoder_read(void); void encoder_update_kb(int8_t index, bool clockwise); void encoder_update_user(int8_t index, bool clockwise); + +#ifdef SPLIT_KEYBOARD +void encoder_state_raw(uint8_t* slave_state); +void encoder_update_raw(uint8_t* slave_state); +#endif diff --git a/quantum/split_common/matrix.c b/quantum/split_common/matrix.c index dcb96254f58..eb110bd23ad 100644 --- a/quantum/split_common/matrix.c +++ b/quantum/split_common/matrix.c @@ -29,6 +29,10 @@ along with this program. If not, see . #include "debounce.h" #include "transport.h" +#ifdef ENCODER_ENABLE + #include "encoder.h" +#endif + #if (MATRIX_COLS <= 8) # define print_matrix_header() print("\nr/c 01234567\n") # define print_matrix_row(row) print_bin_reverse8(matrix_get_row(row)) @@ -320,6 +324,9 @@ uint8_t matrix_scan(void) { matrix_scan_quantum(); } else { transport_slave(matrix + thisHand); +#ifdef ENCODER_ENABLE + encoder_read(); +#endif matrix_slave_scan_user(); } diff --git a/quantum/split_common/transport.c b/quantum/split_common/transport.c index 8d408f6fdc6..ab055ee6566 100644 --- a/quantum/split_common/transport.c +++ b/quantum/split_common/transport.c @@ -1,4 +1,5 @@ #include +#include #include "config.h" #include "matrix.h" @@ -15,15 +16,45 @@ extern backlight_config_t backlight_config; #endif +#ifdef ENCODER_ENABLE +# include "encoder.h" +#endif + #if defined(USE_I2C) || defined(EH) # include "i2c_master.h" # include "i2c_slave.h" -# define I2C_BACKLIT_START 0x00 -// Need 4 bytes for RGB (32 bit) -# define I2C_RGB_START 0x01 -# define I2C_KEYMAP_START 0x05 +typedef struct __attribute__ ((__packed__)) { +#ifdef BACKLIGHT_ENABLE + uint8_t backlight_level; +#endif +#ifdef RGBLIGHT_ENABLE + uint32_t rgb_settings; +#endif +#ifdef ENCODER_ENABLE + uint8_t encoder_state[NUMBER_OF_ENCODERS]; +#endif + // Keep matrix last, we are only using this for it's offset + uint8_t matrix_start[0]; +} transport_values_t; + +__attribute__ ((unused)) +static transport_values_t transport_values; + +#ifdef BACKLIGHT_ENABLE +# define I2C_BACKLIT_START (uint8_t)offsetof(transport_values_t, backlight_level) +#endif + +#ifdef RGBLIGHT_ENABLE +# define I2C_RGB_START (uint8_t)offsetof(transport_values_t, rgb_settings) +#endif + +#ifdef ENCODER_ENABLE +# define I2C_ENCODER_START (uint8_t)offsetof(transport_values_t, encoder_state) +#endif + +#define I2C_KEYMAP_START (uint8_t)offsetof(transport_values_t, matrix_start) # define TIMEOUT 100 @@ -37,25 +68,28 @@ bool transport_master(matrix_row_t matrix[]) { // write backlight info # ifdef BACKLIGHT_ENABLE - static uint8_t prev_level = ~0; - uint8_t level = get_backlight_level(); - if (level != prev_level) { + uint8_t level = get_backlight_level(); + if (level != transport_values.backlight_level) { if (i2c_writeReg(SLAVE_I2C_ADDRESS, I2C_BACKLIT_START, (void *)&level, sizeof(level), TIMEOUT) >= 0) { - prev_level = level; + transport_values.backlight_level = level; } } # endif # ifdef RGBLIGHT_ENABLE - static uint32_t prev_rgb = ~0; - uint32_t rgb = rgblight_read_dword(); - if (rgb != prev_rgb) { + uint32_t rgb = rgblight_read_dword(); + if (rgb != transport_values.rgb_settings) { if (i2c_writeReg(SLAVE_I2C_ADDRESS, I2C_RGB_START, (void *)&rgb, sizeof(rgb), TIMEOUT) >= 0) { - prev_rgb = rgb; + transport_values.rgb_settings = rgb; } } # endif +# ifdef ENCODER_ENABLE + i2c_readReg(SLAVE_I2C_ADDRESS, I2C_ENCODER_START, (void *)transport_values.encoder_state, sizeof(transport_values.encoder_state), TIMEOUT); + encoder_update_raw(&transport_values.encoder_state[0]); +# endif + return true; } @@ -73,6 +107,10 @@ void transport_slave(matrix_row_t matrix[]) { // Update the RGB with the new data rgblight_update_dword(rgb); # endif + +# ifdef ENCODER_ENABLE + encoder_state_raw((uint8_t*)(i2c_slave_reg + I2C_ENCODER_START)); +# endif } void transport_master_init(void) { i2c_init(); } @@ -83,12 +121,15 @@ void transport_slave_init(void) { i2c_slave_init(SLAVE_I2C_ADDRESS); } # include "serial.h" -typedef struct _Serial_s2m_buffer_t { +typedef struct __attribute__ ((__packed__)) { +# ifdef ENCODER_ENABLE + uint8_t encoder_state[NUMBER_OF_ENCODERS]; +# endif // TODO: if MATRIX_COLS > 8 change to uint8_t packed_matrix[] for pack/unpack matrix_row_t smatrix[ROWS_PER_HAND]; } Serial_s2m_buffer_t; -typedef struct _Serial_m2s_buffer_t { +typedef struct __attribute__ ((__packed__)) { # ifdef BACKLIGHT_ENABLE uint8_t backlight_level; # endif @@ -147,6 +188,10 @@ bool transport_master(matrix_row_t matrix[]) { } # endif +# ifdef ENCODER_ENABLE + encoder_update_raw((uint8_t*)&serial_s2m_buffer.encoder_state); +# endif + return true; } @@ -162,6 +207,10 @@ void transport_slave(matrix_row_t matrix[]) { // Update RGB config with the new data rgblight_update_dword(serial_m2s_buffer.rgblight_config.raw); # endif + +# ifdef ENCODER_ENABLE + encoder_state_raw((uint8_t*)&serial_s2m_buffer.encoder_state); +# endif } #endif From 763b26cdb98c2702f7b2f8de239d4edba0fa4065 Mon Sep 17 00:00:00 2001 From: Daniel Prilik Date: Wed, 3 Apr 2019 18:30:47 -0700 Subject: [PATCH 021/171] RGB Matrix support for Massdrop CTRL/ALT (#5328) * port Massdrop CTRL/ALT to use RGB Matrix Co-authored-by: Matt Schneeberger * Massdrop lighting support working This commit is to get the Massdrop lighting code working again through use of the compilation define USE_MASSDROP_CONFIGURATOR added to a keymap's rules.mk. Added keymaps for both CTRL and ALT named default_md and mac_md. These should be used if the Massdrop style lighting is desired. * Updating config based on testing results with patrickmt & compile errors * Updates for PR5328 For CTRL and ALT: Moved location of new RGB Matrix macros from config_led.h to config.h. Added RGB_MATRIX_LED_FLUSH_LIMIT (time between flushes) to config.h for correct LED driver update timing. Re-added missing breathing code for when Massdrop configurator mode is defined. * remove prilik keymap form PR --- keyboards/massdrop/alt/config.h | 7 + keyboards/massdrop/alt/config_led.c | 148 +++++ keyboards/massdrop/alt/config_led.h | 25 +- .../massdrop/alt/keymaps/abishalom/keymap.c | 122 +--- .../massdrop/alt/keymaps/default/keymap.c | 122 +--- .../massdrop/alt/keymaps/default_md/keymap.c | 223 +++++++ .../massdrop/alt/keymaps/default_md/rules.mk | 2 + keyboards/massdrop/alt/keymaps/mac/keymap.c | 122 +--- .../massdrop/alt/keymaps/mac_md/keymap.c | 193 ++++++ .../massdrop/alt/keymaps/mac_md/rules.mk | 2 + .../massdrop/alt/keymaps/reywood/README.md | 5 + .../massdrop/alt/keymaps/reywood/rules.mk | 5 +- keyboards/massdrop/alt/rules.mk | 7 +- keyboards/massdrop/ctrl/config.h | 7 + keyboards/massdrop/ctrl/config_led.c | 144 +++++ keyboards/massdrop/ctrl/config_led.h | 25 +- .../massdrop/ctrl/keymaps/default/keymap.c | 126 +--- .../massdrop/ctrl/keymaps/default_md/keymap.c | 226 +++++++ .../massdrop/ctrl/keymaps/default_md/rules.mk | 2 + keyboards/massdrop/ctrl/keymaps/mac/keymap.c | 126 +--- .../massdrop/ctrl/keymaps/mac_md/keymap.c | 196 ++++++ .../massdrop/ctrl/keymaps/mac_md/rules.mk | 2 + .../ctrl/keymaps/responsive_pattern/README.md | 5 + .../ctrl/keymaps/responsive_pattern/keymap.c | 5 +- .../ctrl/keymaps/responsive_pattern/rules.mk | 2 + keyboards/massdrop/ctrl/led_programs.c | 120 ---- keyboards/massdrop/ctrl/rules.mk | 7 +- quantum/rgb_matrix.c | 19 +- quantum/rgb_matrix_types.h | 11 +- tmk_core/common/arm_atsam/suspend.c | 9 +- tmk_core/protocol/arm_atsam.mk | 5 +- .../protocol/arm_atsam/arm_atsam_protocol.h | 3 + tmk_core/protocol/arm_atsam/i2c_master.c | 8 +- tmk_core/protocol/arm_atsam/led_matrix.c | 608 ++++++++---------- tmk_core/protocol/arm_atsam/led_matrix.h | 92 +-- .../protocol/arm_atsam/led_matrix_programs.c | 5 +- tmk_core/protocol/arm_atsam/main_arm_atsam.c | 16 +- tmk_core/protocol/arm_atsam/usb/usb2422.c | 6 +- 38 files changed, 1688 insertions(+), 1070 deletions(-) create mode 100644 keyboards/massdrop/alt/config_led.c create mode 100644 keyboards/massdrop/alt/keymaps/default_md/keymap.c create mode 100644 keyboards/massdrop/alt/keymaps/default_md/rules.mk create mode 100644 keyboards/massdrop/alt/keymaps/mac_md/keymap.c create mode 100644 keyboards/massdrop/alt/keymaps/mac_md/rules.mk create mode 100644 keyboards/massdrop/alt/keymaps/reywood/README.md create mode 100644 keyboards/massdrop/ctrl/config_led.c create mode 100644 keyboards/massdrop/ctrl/keymaps/default_md/keymap.c create mode 100644 keyboards/massdrop/ctrl/keymaps/default_md/rules.mk create mode 100644 keyboards/massdrop/ctrl/keymaps/mac_md/keymap.c create mode 100644 keyboards/massdrop/ctrl/keymaps/mac_md/rules.mk create mode 100644 keyboards/massdrop/ctrl/keymaps/responsive_pattern/README.md create mode 100644 keyboards/massdrop/ctrl/keymaps/responsive_pattern/rules.mk delete mode 100644 keyboards/massdrop/ctrl/led_programs.c rename keyboards/massdrop/alt/led_programs.c => tmk_core/protocol/arm_atsam/led_matrix_programs.c (99%) diff --git a/keyboards/massdrop/alt/config.h b/keyboards/massdrop/alt/config.h index d2f73a6a8e1..f63c38bf6f8 100644 --- a/keyboards/massdrop/alt/config.h +++ b/keyboards/massdrop/alt/config.h @@ -119,3 +119,10 @@ along with this program. If not, see . //#define NO_ACTION_ONESHOT //#define NO_ACTION_MACRO //#define NO_ACTION_FUNCTION + +#define RGB_MATRIX_KEYPRESSES +#define RGB_MATRIX_LED_PROCESS_LIMIT 15 +#define RGB_MATRIX_LED_FLUSH_LIMIT 10 +#define RGB_MATRIX_EXTRA_TOG + +#include "config_led.h" diff --git a/keyboards/massdrop/alt/config_led.c b/keyboards/massdrop/alt/config_led.c new file mode 100644 index 00000000000..7d98e47c907 --- /dev/null +++ b/keyboards/massdrop/alt/config_led.c @@ -0,0 +1,148 @@ +#ifdef RGB_MATRIX_ENABLE +#include "alt.h" + +#include "led_matrix.h" +#include "rgb_matrix.h" +#include "config_led.h" + +// This table can be almost-automatically derived from ISSI3733_LED_MAP that is +// defined in config_led.h + +// You can calculate the (0-244, 0-64) x/y values from the x/y values defined in +// ISSI3733_LED_MAP with the following formula: +// uint8_t rgb_x = ((ISSI3733_LED_MAP[i].x - MIN_X) / (MAX_X - MIN_X)) * 224; +// uint8_t rgb_y = ((ISSI3733_LED_MAP[i].y - MIN_Y) / (MAX_Y - MIN_Y)) * 64; +// Where the min/max vars are the minimum and maximum "bounds" of x/y values +// present in ISSI3733_LED_MAP +// +// The row/col values need to be manually tweaked though, compensating for the +// "empty" cells that are a product of larger keys +// +// There is a quick-and-dirty implementation of this under ledvis.html + +const rgb_led g_rgb_leds[DRIVER_LED_TOTAL] = { + /* 0 */ { { (0)|(0 << 4) }, { 8, 56 }, 0 }, // KC_ESC + /* 1 */ { { (0)|(1 << 4) }, { 22, 56 }, 0 }, // KC_1 + /* 2 */ { { (0)|(2 << 4) }, { 35, 56 }, 0 }, // KC_2 + /* 3 */ { { (0)|(3 << 4) }, { 49, 56 }, 0 }, // KC_3 + /* 4 */ { { (0)|(4 << 4) }, { 63, 56 }, 0 }, // KC_4 + /* 5 */ { { (0)|(5 << 4) }, { 77, 56 }, 0 }, // KC_5 + /* 6 */ { { (0)|(6 << 4) }, { 91, 56 }, 0 }, // KC_6 + /* 7 */ { { (0)|(7 << 4) }, { 105, 56 }, 0 }, // KC_7 + /* 8 */ { { (0)|(8 << 4) }, { 118, 56 }, 0 }, // KC_8 + /* 9 */ { { (0)|(9 << 4) }, { 132, 56 }, 0 }, // KC_9 + /* 10 */ { { (0)|(10 << 4) }, { 146, 56 }, 0 }, // KC_0 + /* 11 */ { { (0)|(11 << 4) }, { 160, 56 }, 0 }, // KC_MINS + /* 12 */ { { (0)|(12 << 4) }, { 174, 56 }, 0 }, // KC_EQL + /* 13 */ { { (0)|(13 << 4) }, { 195, 56 }, 0 }, // KC_BSPC + /* 14 */ { { (0)|(14 << 4) }, { 215, 56 }, 0 }, // KC_DEL + /* 15 */ { { (1)|(0 << 4) }, { 11, 44 }, 0 }, // KC_TAB + /* 16 */ { { (1)|(1 << 4) }, { 28, 44 }, 0 }, // KC_Q + /* 17 */ { { (1)|(2 << 4) }, { 42, 44 }, 0 }, // KC_W + /* 18 */ { { (1)|(3 << 4) }, { 56, 44 }, 0 }, // KC_E + /* 19 */ { { (1)|(4 << 4) }, { 70, 44 }, 0 }, // KC_R + /* 20 */ { { (1)|(5 << 4) }, { 84, 44 }, 0 }, // KC_T + /* 21 */ { { (1)|(6 << 4) }, { 98, 44 }, 0 }, // KC_Y + /* 22 */ { { (1)|(7 << 4) }, { 112, 44 }, 0 }, // KC_U + /* 23 */ { { (1)|(8 << 4) }, { 125, 44 }, 0 }, // KC_I + /* 24 */ { { (1)|(9 << 4) }, { 139, 44 }, 0 }, // KC_O + /* 25 */ { { (1)|(10 << 4) }, { 153, 44 }, 0 }, // KC_P + /* 26 */ { { (1)|(11 << 4) }, { 167, 44 }, 0 }, // KC_LBRC + /* 27 */ { { (1)|(12 << 4) }, { 181, 44 }, 0 }, // KC_RBRC + /* 28 */ { { (1)|(13 << 4) }, { 198, 44 }, 0 }, // KC_BSLS + /* 29 */ { { (1)|(14 << 4) }, { 215, 44 }, 0 }, // KC_HOME + /* 30 */ { { (2)|(0 << 4) }, { 13, 32 }, 1 }, // KC_CAPS + /* 31 */ { { (2)|(1 << 4) }, { 32, 32 }, 0 }, // KC_A + /* 32 */ { { (2)|(2 << 4) }, { 46, 32 }, 0 }, // KC_S + /* 33 */ { { (2)|(3 << 4) }, { 60, 32 }, 0 }, // KC_D + /* 34 */ { { (2)|(4 << 4) }, { 73, 32 }, 0 }, // KC_F + /* 35 */ { { (2)|(5 << 4) }, { 87, 32 }, 0 }, // KC_G + /* 36 */ { { (2)|(6 << 4) }, { 101, 32 }, 0 }, // KC_H + /* 37 */ { { (2)|(7 << 4) }, { 115, 32 }, 0 }, // KC_J + /* 38 */ { { (2)|(8 << 4) }, { 129, 32 }, 0 }, // KC_K + /* 39 */ { { (2)|(9 << 4) }, { 143, 32 }, 0 }, // KC_L + /* 40 */ { { (2)|(10 << 4) }, { 156, 32 }, 0 }, // KC_SCLN + /* 41 */ { { (2)|(11 << 4) }, { 170, 32 }, 0 }, // KC_QUOT + /* _________________________________________ */ // ____ + /* 42 */ { { (2)|(13 << 4) }, { 193, 32 }, 0 }, // KC_ENT + /* 43 */ { { (2)|(14 << 4) }, { 215, 32 }, 0 }, // KC_PGUP + /* 44 */ { { (3)|(0 << 4) }, { 16, 19 }, 0 }, // KC_LSFT + /* 45 */ { { (3)|(2 << 4) }, { 39, 19 }, 0 }, // KC_Z + /* 46 */ { { (3)|(3 << 4) }, { 53, 19 }, 0 }, // KC_X + /* 47 */ { { (3)|(4 << 4) }, { 67, 19 }, 0 }, // KC_C + /* 48 */ { { (3)|(5 << 4) }, { 80, 19 }, 0 }, // KC_V + /* 49 */ { { (3)|(6 << 4) }, { 94, 19 }, 0 }, // KC_B + /* 50 */ { { (3)|(7 << 4) }, { 108, 19 }, 0 }, // KC_N + /* 51 */ { { (3)|(8 << 4) }, { 122, 19 }, 0 }, // KC_M + /* 52 */ { { (3)|(9 << 4) }, { 136, 19 }, 0 }, // KC_COMM + /* 53 */ { { (3)|(10 << 4) }, { 150, 19 }, 0 }, // KC_DOT + /* 54 */ { { (3)|(11 << 4) }, { 163, 19 }, 0 }, // KC_SLSH + /* 55 */ { { (3)|(12 << 4) }, { 182, 19 }, 0 }, // KC_RSFT + /* _________________________________________ */ // ____ + /* 56 */ { { (3)|(13 << 4) }, { 201, 19 }, 0 }, // KC_UP + /* 57 */ { { (3)|(14 << 4) }, { 215, 19 }, 0 }, // KC_PGDN + /* 58 */ { { (4)|(0 << 4) }, { 9, 7 }, 0 }, // KC_LCTL + /* 59 */ { { (4)|(1 << 4) }, { 27, 7 }, 0 }, // KC_LGUI + /* 60 */ { { (4)|(2 << 4) }, { 44, 7 }, 0 }, // KC_LALT + /* _________________________________________ */ // ____ + /* _________________________________________ */ // ____ + /* _________________________________________ */ // ____ + /* 61 */ { { (4)|(6 << 4) }, { 96, 7 }, 0 }, // KC_SPC + /* _________________________________________ */ // ____ + /* _________________________________________ */ // ____ + /* _________________________________________ */ // ____ + /* 62 */ { { (4)|(10 << 4) }, { 148, 7 }, 0 }, // KC_RALT + /* 63 */ { { (4)|(11 << 4) }, { 165, 7 }, 0 }, // MO(1) + /* 64 */ { { (4)|(12 << 4) }, { 188, 7 }, 0 }, // KC_LEFT + /* 65 */ { { (4)|(13 << 4) }, { 201, 7 }, 0 }, // KC_DOWN + /* 66 */ { { (4)|(14 << 4) }, { 215, 7 }, 0 }, // KC_RGHT + + // Underglow LEDs + { { 255 }, { 1, 1 }, 0 }, + { { 255 }, { 15, 0 }, 0 }, + { { 255 }, { 31, 0 }, 0 }, + { { 255 }, { 47, 0 }, 0 }, + { { 255 }, { 63, 0 }, 0 }, + { { 255 }, { 79, 0 }, 0 }, + { { 255 }, { 95, 0 }, 0 }, + { { 255 }, { 112, 0 }, 0 }, + { { 255 }, { 128, 0 }, 0 }, + { { 255 }, { 144, 0 }, 0 }, + { { 255 }, { 160, 0 }, 0 }, + { { 255 }, { 176, 0 }, 0 }, + { { 255 }, { 192, 0 }, 0 }, + { { 255 }, { 208, 0 }, 0 }, + { { 255 }, { 222, 1 }, 0 }, + { { 255 }, { 224, 13 }, 0 }, + { { 255 }, { 224, 25 }, 0 }, + { { 255 }, { 224, 38 }, 0 }, + { { 255 }, { 224, 50 }, 0 }, + { { 255 }, { 222, 62 }, 0 }, + { { 255 }, { 191, 64 }, 0 }, + { { 255 }, { 179, 64 }, 0 }, + { { 255 }, { 167, 64 }, 0 }, + { { 255 }, { 153, 64 }, 0 }, + { { 255 }, { 139, 64 }, 0 }, + { { 255 }, { 125, 64 }, 0 }, + { { 255 }, { 112, 64 }, 0 }, + { { 255 }, { 98, 64 }, 0 }, + { { 255 }, { 84, 64 }, 0 }, + { { 255 }, { 70, 64 }, 0 }, + { { 255 }, { 56, 64 }, 0 }, + { { 255 }, { 42, 64 }, 0 }, + { { 255 }, { 28, 64 }, 0 }, + { { 255 }, { 1, 62 }, 0 }, + { { 255 }, { 0, 50 }, 0 }, + { { 255 }, { 0, 38 }, 0 }, + { { 255 }, { 0, 25 }, 0 }, + { { 255 }, { 0, 13 }, 0 }, +}; + +#ifdef USB_LED_INDICATOR_ENABLE +void rgb_matrix_indicators_kb(void) +{ + led_matrix_indicators(); +} +#endif // USB_LED_INDICATOR_ENABLE + +#endif diff --git a/keyboards/massdrop/alt/config_led.h b/keyboards/massdrop/alt/config_led.h index a049e38179a..82117b33279 100644 --- a/keyboards/massdrop/alt/config_led.h +++ b/keyboards/massdrop/alt/config_led.h @@ -15,11 +15,11 @@ You should have received a copy of the GNU General Public License along with this program. If not, see . */ -#ifndef _config_led_h_ -#define _config_led_h_ +#pragma once //Define number of ISSI3733 drivers being used (1...16) #define ISSI3733_DRIVER_COUNT 2 +#define DRIVER_LED_TOTAL ISSI3733_LED_COUNT //Hardware address of each driver (Refer to ISSI3733 pdf "Table 1 Slave Address" and keyboard schematic) #define ISSI3773_DRIVER_ADDRESSES { 0xA0, 0xBE } @@ -30,22 +30,25 @@ along with this program. If not, see . //Count of LED bodies #define ISSI3733_LED_COUNT 105 -//Default Global Current Register value (Default brightness 0 - 255) -#define ISSI3733_GCR_DEFAULT 128 - #define LED_GCR_MAX 165 //Max GCR value (0 - 255) WARNING: Raising this value may overload the LED drivers and USB bus #define LED_GCR_STEP 10 //GCR increment/decrement value +#ifdef USE_MASSDROP_CONFIGURATOR +#define ANIMATION_SPEED_STEP 1 + +#define BREATHE_STEP 1 +#define BREATHE_MIN_STEP 0 +#define BREATHE_MAX_STEP 255 +#endif + +//Default Global Current Register value (Default brightness 0 - 255) +#define ISSI3733_GCR_DEFAULT LED_GCR_MAX + //Automatic power rollback and recovery #define V5_HIGH 2540 //5V high level (After low power detect, point at which LEDs are allowed to use more power ) #define V5_LOW 2480 //5V low level (LED power rolled back to stay above this limit) #define V5_CAT 2200 //5V catastrophic level (Host USB port potential to shut down) -#define ANIMATION_SPEED_STEP 1 - -#define BREATHE_MIN_STEP 0 -#define BREATHE_MAX_STEP 255 - //LED Mapping - More practically generated from a spreadsheet program //id: ID of the LED (Sync with PCB callouts) //x: Physical X coordinate of LED (units do not matter) @@ -174,5 +177,3 @@ along with this program. If not, see . #define USB_LED_COMPOSE_SCANCODE 255 #define USB_LED_KANA_SCANCODE 255 #endif //USB_LED_INDICATOR_ENABLE - -#endif //_config_led_h_ diff --git a/keyboards/massdrop/alt/keymaps/abishalom/keymap.c b/keyboards/massdrop/alt/keymaps/abishalom/keymap.c index 10bc62c1f0e..a4519d40490 100644 --- a/keyboards/massdrop/alt/keymaps/abishalom/keymap.c +++ b/keyboards/massdrop/alt/keymaps/abishalom/keymap.c @@ -1,25 +1,13 @@ #include QMK_KEYBOARD_H enum alt_keycodes { - L_BRI = SAFE_RANGE, //LED Brightness Increase - L_BRD, //LED Brightness Decrease - L_PTN, //LED Pattern Select Next - L_PTP, //LED Pattern Select Previous - L_PSI, //LED Pattern Speed Increase - L_PSD, //LED Pattern Speed Decrease - L_T_MD, //LED Toggle Mode - L_T_ONF, //LED Toggle On / Off - L_ON, //LED On - L_OFF, //LED Off - L_T_BR, //LED Toggle Breath Effect - L_T_PTD, //LED Toggle Scrolling Pattern Direction - U_T_AUTO, //USB Extra Port Toggle Auto Detect / Always Active - U_T_AGCR, //USB Toggle Automatic GCR control - DBG_TOG, //DEBUG Toggle On / Off - DBG_MTRX, //DEBUG Toggle Matrix Prints - DBG_KBD, //DEBUG Toggle Keyboard Prints - DBG_MOU, //DEBUG Toggle Mouse Prints - MD_BOOT, //Restart into bootloader after hold timeout + U_T_AUTO = SAFE_RANGE, //USB Extra Port Toggle Auto Detect / Always Active + U_T_AGCR, //USB Toggle Automatic GCR control + DBG_TOG, //DEBUG Toggle On / Off + DBG_MTRX, //DEBUG Toggle Matrix Prints + DBG_KBD, //DEBUG Toggle Keyboard Prints + DBG_MOU, //DEBUG Toggle Mouse Prints + MD_BOOT, //Restart into bootloader after hold timeout }; #define TG_NKRO MAGIC_TOGGLE_NKRO //Toggle 6KRO / NKRO mode @@ -35,19 +23,19 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, MO(1), KC_LEFT, KC_DOWN, KC_RGHT \ ), [1] = LAYOUT( - KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_TRNS, KC_MUTE, \ - L_T_BR, L_PSD, L_BRI, L_PSI, KC_TRNS, KC_TRNS, KC_TRNS, U_T_AUTO,U_T_AGCR,KC_TRNS, KC_PSCR, KC_SLCK, KC_PAUS, KC_TRNS, KC_END, \ - L_T_PTD, L_PTP, L_BRD, L_PTN, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_VOLU, \ - KC_TRNS, L_T_MD, L_T_ONF, KC_TRNS, KC_TRNS, MD_BOOT, TG_NKRO, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PGUP, KC_VOLD, \ - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_HOME, KC_PGDN, KC_END \ + KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, KC_MUTE, \ + _______, RGB_SPD, RGB_VAI, RGB_SPI, RGB_HUI, RGB_SAI, _______, U_T_AUTO,U_T_AGCR,_______, KC_PSCR, KC_SLCK, KC_PAUS, _______, KC_END, \ + _______, RGB_RMOD,RGB_VAD, RGB_MOD, RGB_HUD, RGB_SAD, _______, _______, _______, _______, _______, _______, _______, KC_VOLU, \ + _______, RGB_TOG, _______, _______, _______, MD_BOOT, TG_NKRO, DBG_TOG, _______, _______, _______, _______, KC_PGUP, KC_VOLD, \ + _______, _______, _______, _______, _______, _______, KC_HOME, KC_PGDN, KC_END \ ), /* [X] = LAYOUT( - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \ - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \ - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \ - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \ - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS \ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ + _______, _______, _______, _______, _______, _______, _______, _______, _______ \ ), */ }; @@ -68,82 +56,6 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) { static uint32_t key_timer; switch (keycode) { - case L_BRI: - if (record->event.pressed) { - if (LED_GCR_STEP > LED_GCR_MAX - gcr_desired) gcr_desired = LED_GCR_MAX; - else gcr_desired += LED_GCR_STEP; - if (led_animation_breathing) gcr_breathe = gcr_desired; - } - return false; - case L_BRD: - if (record->event.pressed) { - if (LED_GCR_STEP > gcr_desired) gcr_desired = 0; - else gcr_desired -= LED_GCR_STEP; - if (led_animation_breathing) gcr_breathe = gcr_desired; - } - return false; - case L_PTN: - if (record->event.pressed) { - if (led_animation_id == led_setups_count - 1) led_animation_id = 0; - else led_animation_id++; - } - return false; - case L_PTP: - if (record->event.pressed) { - if (led_animation_id == 0) led_animation_id = led_setups_count - 1; - else led_animation_id--; - } - return false; - case L_PSI: - if (record->event.pressed) { - led_animation_speed += ANIMATION_SPEED_STEP; - } - return false; - case L_PSD: - if (record->event.pressed) { - led_animation_speed -= ANIMATION_SPEED_STEP; - if (led_animation_speed < 0) led_animation_speed = 0; - } - return false; - case L_T_MD: - if (record->event.pressed) { - led_lighting_mode++; - if (led_lighting_mode > LED_MODE_MAX_INDEX) led_lighting_mode = LED_MODE_NORMAL; - } - return false; - case L_T_ONF: - if (record->event.pressed) { - led_enabled = !led_enabled; - I2C3733_Control_Set(led_enabled); - } - return false; - case L_ON: - if (record->event.pressed) { - led_enabled = 1; - I2C3733_Control_Set(led_enabled); - } - return false; - case L_OFF: - if (record->event.pressed) { - led_enabled = 0; - I2C3733_Control_Set(led_enabled); - } - return false; - case L_T_BR: - if (record->event.pressed) { - led_animation_breathing = !led_animation_breathing; - if (led_animation_breathing) { - gcr_breathe = gcr_desired; - led_animation_breathe_cur = BREATHE_MIN_STEP; - breathe_dir = 1; - } - } - return false; - case L_T_PTD: - if (record->event.pressed) { - led_animation_direction = !led_animation_direction; - } - return false; case U_T_AUTO: if (record->event.pressed && MODS_SHIFT && MODS_CTRL) { TOGGLE_FLAG_AND_PRINT(usb_extra_manual, "USB extra port manual mode"); diff --git a/keyboards/massdrop/alt/keymaps/default/keymap.c b/keyboards/massdrop/alt/keymaps/default/keymap.c index 10bc62c1f0e..a4519d40490 100644 --- a/keyboards/massdrop/alt/keymaps/default/keymap.c +++ b/keyboards/massdrop/alt/keymaps/default/keymap.c @@ -1,25 +1,13 @@ #include QMK_KEYBOARD_H enum alt_keycodes { - L_BRI = SAFE_RANGE, //LED Brightness Increase - L_BRD, //LED Brightness Decrease - L_PTN, //LED Pattern Select Next - L_PTP, //LED Pattern Select Previous - L_PSI, //LED Pattern Speed Increase - L_PSD, //LED Pattern Speed Decrease - L_T_MD, //LED Toggle Mode - L_T_ONF, //LED Toggle On / Off - L_ON, //LED On - L_OFF, //LED Off - L_T_BR, //LED Toggle Breath Effect - L_T_PTD, //LED Toggle Scrolling Pattern Direction - U_T_AUTO, //USB Extra Port Toggle Auto Detect / Always Active - U_T_AGCR, //USB Toggle Automatic GCR control - DBG_TOG, //DEBUG Toggle On / Off - DBG_MTRX, //DEBUG Toggle Matrix Prints - DBG_KBD, //DEBUG Toggle Keyboard Prints - DBG_MOU, //DEBUG Toggle Mouse Prints - MD_BOOT, //Restart into bootloader after hold timeout + U_T_AUTO = SAFE_RANGE, //USB Extra Port Toggle Auto Detect / Always Active + U_T_AGCR, //USB Toggle Automatic GCR control + DBG_TOG, //DEBUG Toggle On / Off + DBG_MTRX, //DEBUG Toggle Matrix Prints + DBG_KBD, //DEBUG Toggle Keyboard Prints + DBG_MOU, //DEBUG Toggle Mouse Prints + MD_BOOT, //Restart into bootloader after hold timeout }; #define TG_NKRO MAGIC_TOGGLE_NKRO //Toggle 6KRO / NKRO mode @@ -35,19 +23,19 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, MO(1), KC_LEFT, KC_DOWN, KC_RGHT \ ), [1] = LAYOUT( - KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_TRNS, KC_MUTE, \ - L_T_BR, L_PSD, L_BRI, L_PSI, KC_TRNS, KC_TRNS, KC_TRNS, U_T_AUTO,U_T_AGCR,KC_TRNS, KC_PSCR, KC_SLCK, KC_PAUS, KC_TRNS, KC_END, \ - L_T_PTD, L_PTP, L_BRD, L_PTN, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_VOLU, \ - KC_TRNS, L_T_MD, L_T_ONF, KC_TRNS, KC_TRNS, MD_BOOT, TG_NKRO, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PGUP, KC_VOLD, \ - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_HOME, KC_PGDN, KC_END \ + KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, KC_MUTE, \ + _______, RGB_SPD, RGB_VAI, RGB_SPI, RGB_HUI, RGB_SAI, _______, U_T_AUTO,U_T_AGCR,_______, KC_PSCR, KC_SLCK, KC_PAUS, _______, KC_END, \ + _______, RGB_RMOD,RGB_VAD, RGB_MOD, RGB_HUD, RGB_SAD, _______, _______, _______, _______, _______, _______, _______, KC_VOLU, \ + _______, RGB_TOG, _______, _______, _______, MD_BOOT, TG_NKRO, DBG_TOG, _______, _______, _______, _______, KC_PGUP, KC_VOLD, \ + _______, _______, _______, _______, _______, _______, KC_HOME, KC_PGDN, KC_END \ ), /* [X] = LAYOUT( - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \ - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \ - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \ - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \ - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS \ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ + _______, _______, _______, _______, _______, _______, _______, _______, _______ \ ), */ }; @@ -68,82 +56,6 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) { static uint32_t key_timer; switch (keycode) { - case L_BRI: - if (record->event.pressed) { - if (LED_GCR_STEP > LED_GCR_MAX - gcr_desired) gcr_desired = LED_GCR_MAX; - else gcr_desired += LED_GCR_STEP; - if (led_animation_breathing) gcr_breathe = gcr_desired; - } - return false; - case L_BRD: - if (record->event.pressed) { - if (LED_GCR_STEP > gcr_desired) gcr_desired = 0; - else gcr_desired -= LED_GCR_STEP; - if (led_animation_breathing) gcr_breathe = gcr_desired; - } - return false; - case L_PTN: - if (record->event.pressed) { - if (led_animation_id == led_setups_count - 1) led_animation_id = 0; - else led_animation_id++; - } - return false; - case L_PTP: - if (record->event.pressed) { - if (led_animation_id == 0) led_animation_id = led_setups_count - 1; - else led_animation_id--; - } - return false; - case L_PSI: - if (record->event.pressed) { - led_animation_speed += ANIMATION_SPEED_STEP; - } - return false; - case L_PSD: - if (record->event.pressed) { - led_animation_speed -= ANIMATION_SPEED_STEP; - if (led_animation_speed < 0) led_animation_speed = 0; - } - return false; - case L_T_MD: - if (record->event.pressed) { - led_lighting_mode++; - if (led_lighting_mode > LED_MODE_MAX_INDEX) led_lighting_mode = LED_MODE_NORMAL; - } - return false; - case L_T_ONF: - if (record->event.pressed) { - led_enabled = !led_enabled; - I2C3733_Control_Set(led_enabled); - } - return false; - case L_ON: - if (record->event.pressed) { - led_enabled = 1; - I2C3733_Control_Set(led_enabled); - } - return false; - case L_OFF: - if (record->event.pressed) { - led_enabled = 0; - I2C3733_Control_Set(led_enabled); - } - return false; - case L_T_BR: - if (record->event.pressed) { - led_animation_breathing = !led_animation_breathing; - if (led_animation_breathing) { - gcr_breathe = gcr_desired; - led_animation_breathe_cur = BREATHE_MIN_STEP; - breathe_dir = 1; - } - } - return false; - case L_T_PTD: - if (record->event.pressed) { - led_animation_direction = !led_animation_direction; - } - return false; case U_T_AUTO: if (record->event.pressed && MODS_SHIFT && MODS_CTRL) { TOGGLE_FLAG_AND_PRINT(usb_extra_manual, "USB extra port manual mode"); diff --git a/keyboards/massdrop/alt/keymaps/default_md/keymap.c b/keyboards/massdrop/alt/keymaps/default_md/keymap.c new file mode 100644 index 00000000000..7969583df4b --- /dev/null +++ b/keyboards/massdrop/alt/keymaps/default_md/keymap.c @@ -0,0 +1,223 @@ +#include QMK_KEYBOARD_H + +enum alt_keycodes { + L_BRI = SAFE_RANGE, //LED Brightness Increase //Working + L_BRD, //LED Brightness Decrease //Working + L_PTN, //LED Pattern Select Next //Working + L_PTP, //LED Pattern Select Previous //Working + L_PSI, //LED Pattern Speed Increase //Working + L_PSD, //LED Pattern Speed Decrease //Working + L_T_MD, //LED Toggle Mode //Working + L_T_ONF, //LED Toggle On / Off //Broken + L_ON, //LED On //Broken + L_OFF, //LED Off //Broken + L_T_BR, //LED Toggle Breath Effect //Working + L_T_PTD, //LED Toggle Scrolling Pattern Direction //Working + U_T_AGCR, //USB Toggle Automatic GCR control //Working + DBG_TOG, //DEBUG Toggle On / Off // + DBG_MTRX, //DEBUG Toggle Matrix Prints // + DBG_KBD, //DEBUG Toggle Keyboard Prints // + DBG_MOU, //DEBUG Toggle Mouse Prints // + MD_BOOT //Restart into bootloader after hold timeout //Working +}; + +#define TG_NKRO MAGIC_TOGGLE_NKRO //Toggle 6KRO / NKRO mode + +keymap_config_t keymap_config; + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [0] = LAYOUT( + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_DEL, \ + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_HOME, \ + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_PGUP, \ + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_PGDN, \ + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, MO(1), KC_LEFT, KC_DOWN, KC_RGHT \ + ), + [1] = LAYOUT( + KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, KC_MUTE, \ + L_T_BR, L_PSD, L_BRI, L_PSI, _______, _______, _______, _______, U_T_AGCR,_______, KC_PSCR, KC_SLCK, KC_PAUS, _______, KC_END, \ + L_T_PTD, L_PTP, L_BRD, L_PTN, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_VOLU, \ + _______, L_T_MD, L_T_ONF, _______, _______, MD_BOOT, TG_NKRO, _______, _______, _______, _______, _______, KC_PGUP, KC_VOLD, \ + _______, _______, _______, _______, _______, _______, KC_HOME, KC_PGDN, KC_END \ + ), + /* + [X] = LAYOUT( + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ + _______, _______, _______, _______, _______, _______, _______, _______, _______ \ + ), + */ +}; + +// Runs just one time when the keyboard initializes. +void matrix_init_user(void) { +}; + +// Runs constantly in the background, in a loop. +void matrix_scan_user(void) { +}; + +#define MODS_SHIFT (get_mods() & MOD_BIT(KC_LSHIFT) || get_mods() & MOD_BIT(KC_RSHIFT)) +#define MODS_CTRL (get_mods() & MOD_BIT(KC_LCTL) || get_mods() & MOD_BIT(KC_RCTRL)) +#define MODS_ALT (get_mods() & MOD_BIT(KC_LALT) || get_mods() & MOD_BIT(KC_RALT)) + +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + static uint32_t key_timer; + + switch (keycode) { + case L_BRI: + if (record->event.pressed) { + if (LED_GCR_STEP > LED_GCR_MAX - gcr_desired) gcr_desired = LED_GCR_MAX; + else gcr_desired += LED_GCR_STEP; + if (led_animation_breathing) gcr_breathe = gcr_desired; + } + return false; + case L_BRD: + if (record->event.pressed) { + if (LED_GCR_STEP > gcr_desired) gcr_desired = 0; + else gcr_desired -= LED_GCR_STEP; + if (led_animation_breathing) gcr_breathe = gcr_desired; + } + return false; + case L_PTN: + if (record->event.pressed) { + if (led_animation_id == led_setups_count - 1) led_animation_id = 0; + else led_animation_id++; + } + return false; + case L_PTP: + if (record->event.pressed) { + if (led_animation_id == 0) led_animation_id = led_setups_count - 1; + else led_animation_id--; + } + return false; + case L_PSI: + if (record->event.pressed) { + led_animation_speed += ANIMATION_SPEED_STEP; + } + return false; + case L_PSD: + if (record->event.pressed) { + led_animation_speed -= ANIMATION_SPEED_STEP; + if (led_animation_speed < 0) led_animation_speed = 0; + } + return false; + case L_T_MD: + if (record->event.pressed) { + led_lighting_mode++; + if (led_lighting_mode > LED_MODE_MAX_INDEX) led_lighting_mode = LED_MODE_NORMAL; + } + return false; + case L_T_ONF: + if (record->event.pressed) { + led_enabled = !led_enabled; + I2C3733_Control_Set(led_enabled); + } + return false; + case L_ON: + if (record->event.pressed) { + led_enabled = 1; + I2C3733_Control_Set(led_enabled); + } + return false; + case L_OFF: + if (record->event.pressed) { + led_enabled = 0; + I2C3733_Control_Set(led_enabled); + } + return false; + case L_T_BR: + if (record->event.pressed) { + led_animation_breathing = !led_animation_breathing; + if (led_animation_breathing) { + gcr_breathe = gcr_desired; + led_animation_breathe_cur = BREATHE_MIN_STEP; + breathe_dir = 1; + } + } + return false; + case L_T_PTD: + if (record->event.pressed) { + led_animation_direction = !led_animation_direction; + } + return false; + case U_T_AGCR: + if (record->event.pressed && MODS_SHIFT && MODS_CTRL) { + TOGGLE_FLAG_AND_PRINT(usb_gcr_auto, "USB GCR auto mode"); + } + return false; + case DBG_TOG: + if (record->event.pressed) { + TOGGLE_FLAG_AND_PRINT(debug_enable, "Debug mode"); + } + return false; + case DBG_MTRX: + if (record->event.pressed) { + TOGGLE_FLAG_AND_PRINT(debug_matrix, "Debug matrix"); + } + return false; + case DBG_KBD: + if (record->event.pressed) { + TOGGLE_FLAG_AND_PRINT(debug_keyboard, "Debug keyboard"); + } + return false; + case DBG_MOU: + if (record->event.pressed) { + TOGGLE_FLAG_AND_PRINT(debug_mouse, "Debug mouse"); + } + return false; + case MD_BOOT: + if (record->event.pressed) { + key_timer = timer_read32(); + } else { + if (timer_elapsed32(key_timer) >= 500) { + reset_keyboard(); + } + } + return false; + default: + return true; //Process all other keycodes normally + } +} + +led_instruction_t led_instructions[] = { + //LEDs are normally inactive, no processing is performed on them + //Flags are used in matching criteria for an LED to be active and indicate how to color it + //Flags can be found in tmk_core/protocol/arm_atsam/led_matrix.h (prefixed with LED_FLAG_) + //LED IDs can be found in config_led.h in the keyboard's directory + //Examples are below + + //All LEDs use the user's selected pattern (this is the factory default) + { .flags = LED_FLAG_USE_ROTATE_PATTERN }, + + //Specific LEDs use the user's selected pattern while all others are off + // { .flags = LED_FLAG_MATCH_ID | LED_FLAG_USE_ROTATE_PATTERN, .id0 = 0xFFFFFFFF, .id1 = 0xAAAAAAAA, .id2 = 0x55555555, .id3 = 0x11111111 }, + + //Specific LEDs use specified RGB values while all others are off + // { .flags = LED_FLAG_MATCH_ID | LED_FLAG_USE_RGB, .id0 = 0xFF, .id1 = 0x00FF, .id2 = 0x0000FF00, .id3 = 0xFF000000, .r = 75, .g = 150, .b = 225 }, + + //All LEDs use the user's selected pattern + //On layer 1, all key LEDs (except the top row which keeps active pattern) are red while all edge LEDs are green + //When layer 1 is active, key LEDs use red (id0 32 - 16: 1111 1111 1111 1111 1000 0000 0000 0000 = 0xFFFF8000) (except top row 15 - 1) + //When layer 1 is active, key LEDs use red (id1 64 - 33: 1111 1111 1111 1111 1111 1111 1111 1111 = 0xFFFFFFFF) + //When layer 1 is active, key LEDs use red (id2 67 - 65: 0000 0000 0000 0000 0000 0000 0000 0111 = 0x00000007) + //When layer 1 is active, edge LEDs use green (id2 95 - 68: 1111 1111 1111 1111 1111 1111 1111 1000 = 0xFFFFFFF8) + //When layer 1 is active, edge LEDs use green (id3 105 - 96: 0000 0000 0000 0000 0000 0011 1111 1111 = 0x000003FF) + // { .flags = LED_FLAG_USE_ROTATE_PATTERN }, + // { .flags = LED_FLAG_MATCH_ID | LED_FLAG_MATCH_LAYER | LED_FLAG_USE_RGB, .id0 = 0xFFFF8000, .id1 = 0xFFFFFFFF, .id2 = 0x00000007, .r = 255, .layer = 1 }, + // { .flags = LED_FLAG_MATCH_ID | LED_FLAG_MATCH_LAYER | LED_FLAG_USE_RGB, .id2 = 0xFFFFFFF8, .id3 = 0x000003FF, .g = 127, .layer = 1 }, + + //All key LEDs use red while edge LEDs use the active pattern + //All key LEDs use red (id0 32 - 1: 1111 1111 1111 1111 1111 1111 1111 1111 = 0xFFFFFFFF) + //All key LEDs use red (id1 64 - 33: 1111 1111 1111 1111 1111 1111 1111 1111 = 0xFFFFFFFF) + //All key LEDs use red (id2 67 - 65: 0000 0000 0000 0000 0000 0000 0000 0111 = 0x00000007) + //Edge uses active pattern (id2 95 - 68: 1111 1111 1111 1111 1111 1111 1111 1000 = 0xFFFFFFF8) + //Edge uses active pattern (id3 105 - 96: 0000 0000 0000 0000 0000 0011 1111 1111 = 0x000003FF) + // { .flags = LED_FLAG_MATCH_ID | LED_FLAG_USE_RGB, .id0 = 0xFFFFFFFF, .id1 = 0xFFFFFFFF, .id2 = 0x00000007, .r = 255 }, + // { .flags = LED_FLAG_MATCH_ID | LED_FLAG_USE_ROTATE_PATTERN , .id2 = 0xFFFFFFF8, .id3 = 0x000003FF }, + + //end must be set to 1 to indicate end of instruction set + { .end = 1 } +}; diff --git a/keyboards/massdrop/alt/keymaps/default_md/rules.mk b/keyboards/massdrop/alt/keymaps/default_md/rules.mk new file mode 100644 index 00000000000..064a6f54c1f --- /dev/null +++ b/keyboards/massdrop/alt/keymaps/default_md/rules.mk @@ -0,0 +1,2 @@ +# This keymap requires Massdrop Configurator support +OPT_DEFS += -DUSE_MASSDROP_CONFIGURATOR diff --git a/keyboards/massdrop/alt/keymaps/mac/keymap.c b/keyboards/massdrop/alt/keymaps/mac/keymap.c index 639eb2da75e..26a1c6d0148 100644 --- a/keyboards/massdrop/alt/keymaps/mac/keymap.c +++ b/keyboards/massdrop/alt/keymaps/mac/keymap.c @@ -1,25 +1,13 @@ #include QMK_KEYBOARD_H enum alt_keycodes { - L_BRI = SAFE_RANGE, //LED Brightness Increase - L_BRD, //LED Brightness Decrease - L_PTN, //LED Pattern Select Next - L_PTP, //LED Pattern Select Previous - L_PSI, //LED Pattern Speed Increase - L_PSD, //LED Pattern Speed Decrease - L_T_MD, //LED Toggle Mode - L_T_ONF, //LED Toggle On / Off - L_ON, //LED On - L_OFF, //LED Off - L_T_BR, //LED Toggle Breath Effect - L_T_PTD, //LED Toggle Scrolling Pattern Direction - U_T_AUTO, //USB Extra Port Toggle Auto Detect / Always Active - U_T_AGCR, //USB Toggle Automatic GCR control - DBG_TOG, //DEBUG Toggle On / Off - DBG_MTRX, //DEBUG Toggle Matrix Prints - DBG_KBD, //DEBUG Toggle Keyboard Prints - DBG_MOU, //DEBUG Toggle Mouse Prints - MD_BOOT, //Restart into bootloader after hold timeout + U_T_AUTO = SAFE_RANGE, //USB Extra Port Toggle Auto Detect / Always Active + U_T_AGCR, //USB Toggle Automatic GCR control + DBG_TOG, //DEBUG Toggle On / Off + DBG_MTRX, //DEBUG Toggle Matrix Prints + DBG_KBD, //DEBUG Toggle Keyboard Prints + DBG_MOU, //DEBUG Toggle Mouse Prints + MD_BOOT, //Restart into bootloader after hold timeout }; #define TG_NKRO MAGIC_TOGGLE_NKRO //Toggle 6KRO / NKRO mode @@ -35,19 +23,19 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { KC_LCTL, KC_LALT, KC_LGUI, KC_SPC, KC_RGUI, MO(1), KC_LEFT, KC_DOWN, KC_RGHT \ ), [1] = LAYOUT( - KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_TRNS, KC_MUTE, \ - L_T_BR, L_PSD, L_BRI, L_PSI, KC_TRNS, KC_TRNS, KC_TRNS, U_T_AUTO,U_T_AGCR,KC_TRNS, KC_PSCR, KC_SLCK, KC_PAUS, KC_TRNS, KC_END, \ - L_T_PTD, L_PTP, L_BRD, L_PTN, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_VOLU, \ - KC_TRNS, L_T_MD, L_T_ONF, KC_TRNS, KC_TRNS, MD_BOOT, TG_NKRO, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PGUP, KC_VOLD, \ - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_HOME, KC_PGDN, KC_END \ + KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, KC_MUTE, \ + _______, RGB_SPD, RGB_VAI, RGB_SPI, RGB_HUI, RGB_SAI, _______, U_T_AUTO,U_T_AGCR,_______, KC_PSCR, KC_SLCK, KC_PAUS, _______, KC_END, \ + _______, RGB_RMOD,RGB_VAD, RGB_MOD, RGB_HUD, RGB_SAD, _______, _______, _______, _______, _______, _______, _______, KC_VOLU, \ + _______, RGB_TOG, _______, _______, _______, MD_BOOT, TG_NKRO, DBG_TOG, _______, _______, _______, _______, KC_PGUP, KC_VOLD, \ + _______, _______, _______, _______, _______, _______, KC_HOME, KC_PGDN, KC_END \ ), /* [X] = LAYOUT( - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \ - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \ - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \ - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \ - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS \ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ + _______, _______, _______, _______, _______, _______, _______, _______, _______ \ ), */ }; @@ -68,82 +56,6 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) { static uint32_t key_timer; switch (keycode) { - case L_BRI: - if (record->event.pressed) { - if (LED_GCR_STEP > LED_GCR_MAX - gcr_desired) gcr_desired = LED_GCR_MAX; - else gcr_desired += LED_GCR_STEP; - if (led_animation_breathing) gcr_breathe = gcr_desired; - } - return false; - case L_BRD: - if (record->event.pressed) { - if (LED_GCR_STEP > gcr_desired) gcr_desired = 0; - else gcr_desired -= LED_GCR_STEP; - if (led_animation_breathing) gcr_breathe = gcr_desired; - } - return false; - case L_PTN: - if (record->event.pressed) { - if (led_animation_id == led_setups_count - 1) led_animation_id = 0; - else led_animation_id++; - } - return false; - case L_PTP: - if (record->event.pressed) { - if (led_animation_id == 0) led_animation_id = led_setups_count - 1; - else led_animation_id--; - } - return false; - case L_PSI: - if (record->event.pressed) { - led_animation_speed += ANIMATION_SPEED_STEP; - } - return false; - case L_PSD: - if (record->event.pressed) { - led_animation_speed -= ANIMATION_SPEED_STEP; - if (led_animation_speed < 0) led_animation_speed = 0; - } - return false; - case L_T_MD: - if (record->event.pressed) { - led_lighting_mode++; - if (led_lighting_mode > LED_MODE_MAX_INDEX) led_lighting_mode = LED_MODE_NORMAL; - } - return false; - case L_T_ONF: - if (record->event.pressed) { - led_enabled = !led_enabled; - I2C3733_Control_Set(led_enabled); - } - return false; - case L_ON: - if (record->event.pressed) { - led_enabled = 1; - I2C3733_Control_Set(led_enabled); - } - return false; - case L_OFF: - if (record->event.pressed) { - led_enabled = 0; - I2C3733_Control_Set(led_enabled); - } - return false; - case L_T_BR: - if (record->event.pressed) { - led_animation_breathing = !led_animation_breathing; - if (led_animation_breathing) { - gcr_breathe = gcr_desired; - led_animation_breathe_cur = BREATHE_MIN_STEP; - breathe_dir = 1; - } - } - return false; - case L_T_PTD: - if (record->event.pressed) { - led_animation_direction = !led_animation_direction; - } - return false; case U_T_AUTO: if (record->event.pressed && MODS_SHIFT && MODS_CTRL) { TOGGLE_FLAG_AND_PRINT(usb_extra_manual, "USB extra port manual mode"); diff --git a/keyboards/massdrop/alt/keymaps/mac_md/keymap.c b/keyboards/massdrop/alt/keymaps/mac_md/keymap.c new file mode 100644 index 00000000000..8a052cc250e --- /dev/null +++ b/keyboards/massdrop/alt/keymaps/mac_md/keymap.c @@ -0,0 +1,193 @@ +#include QMK_KEYBOARD_H + +enum alt_keycodes { + L_BRI = SAFE_RANGE, //LED Brightness Increase //Working + L_BRD, //LED Brightness Decrease //Working + L_PTN, //LED Pattern Select Next //Working + L_PTP, //LED Pattern Select Previous //Working + L_PSI, //LED Pattern Speed Increase //Working + L_PSD, //LED Pattern Speed Decrease //Working + L_T_MD, //LED Toggle Mode //Working + L_T_ONF, //LED Toggle On / Off //Broken + L_ON, //LED On //Broken + L_OFF, //LED Off //Broken + L_T_BR, //LED Toggle Breath Effect //Working + L_T_PTD, //LED Toggle Scrolling Pattern Direction //Working + U_T_AGCR, //USB Toggle Automatic GCR control //Working + DBG_TOG, //DEBUG Toggle On / Off // + DBG_MTRX, //DEBUG Toggle Matrix Prints // + DBG_KBD, //DEBUG Toggle Keyboard Prints // + DBG_MOU, //DEBUG Toggle Mouse Prints // + MD_BOOT //Restart into bootloader after hold timeout //Working +}; + +#define TG_NKRO MAGIC_TOGGLE_NKRO //Toggle 6KRO / NKRO mode + +keymap_config_t keymap_config; + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [0] = LAYOUT( + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_DEL, \ + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_HOME, \ + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_PGUP, \ + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_PGDN, \ + KC_LCTL, KC_LALT, KC_LGUI, KC_SPC, KC_RGUI, MO(1), KC_LEFT, KC_DOWN, KC_RGHT \ + ), + [1] = LAYOUT( + KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, KC_MUTE, \ + L_T_BR, L_PSD, L_BRI, L_PSI, _______, _______, _______, _______, U_T_AGCR,_______, KC_PSCR, KC_SLCK, KC_PAUS, _______, KC_END, \ + L_T_PTD, L_PTP, L_BRD, L_PTN, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_VOLU, \ + _______, L_T_MD, L_T_ONF, _______, _______, MD_BOOT, TG_NKRO, _______, _______, _______, _______, _______, KC_PGUP, KC_VOLD, \ + _______, _______, _______, _______, _______, _______, KC_HOME, KC_PGDN, KC_END \ + ), + /* + [X] = LAYOUT( + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ + _______, _______, _______, _______, _______, _______, _______, _______, _______ \ + ), + */ +}; + +// Runs just one time when the keyboard initializes. +void matrix_init_user(void) { +}; + +// Runs constantly in the background, in a loop. +void matrix_scan_user(void) { +}; + +#define MODS_SHIFT (get_mods() & MOD_BIT(KC_LSHIFT) || get_mods() & MOD_BIT(KC_RSHIFT)) +#define MODS_CTRL (get_mods() & MOD_BIT(KC_LCTL) || get_mods() & MOD_BIT(KC_RCTRL)) +#define MODS_ALT (get_mods() & MOD_BIT(KC_LALT) || get_mods() & MOD_BIT(KC_RALT)) + +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + static uint32_t key_timer; + + switch (keycode) { + case L_BRI: + if (record->event.pressed) { + if (LED_GCR_STEP > LED_GCR_MAX - gcr_desired) gcr_desired = LED_GCR_MAX; + else gcr_desired += LED_GCR_STEP; + if (led_animation_breathing) gcr_breathe = gcr_desired; + } + return false; + case L_BRD: + if (record->event.pressed) { + if (LED_GCR_STEP > gcr_desired) gcr_desired = 0; + else gcr_desired -= LED_GCR_STEP; + if (led_animation_breathing) gcr_breathe = gcr_desired; + } + return false; + case L_PTN: + if (record->event.pressed) { + if (led_animation_id == led_setups_count - 1) led_animation_id = 0; + else led_animation_id++; + } + return false; + case L_PTP: + if (record->event.pressed) { + if (led_animation_id == 0) led_animation_id = led_setups_count - 1; + else led_animation_id--; + } + return false; + case L_PSI: + if (record->event.pressed) { + led_animation_speed += ANIMATION_SPEED_STEP; + } + return false; + case L_PSD: + if (record->event.pressed) { + led_animation_speed -= ANIMATION_SPEED_STEP; + if (led_animation_speed < 0) led_animation_speed = 0; + } + return false; + case L_T_MD: + if (record->event.pressed) { + led_lighting_mode++; + if (led_lighting_mode > LED_MODE_MAX_INDEX) led_lighting_mode = LED_MODE_NORMAL; + } + return false; + case L_T_ONF: + if (record->event.pressed) { + led_enabled = !led_enabled; + I2C3733_Control_Set(led_enabled); + } + return false; + case L_ON: + if (record->event.pressed) { + led_enabled = 1; + I2C3733_Control_Set(led_enabled); + } + return false; + case L_OFF: + if (record->event.pressed) { + led_enabled = 0; + I2C3733_Control_Set(led_enabled); + } + return false; + case L_T_BR: + if (record->event.pressed) { + led_animation_breathing = !led_animation_breathing; + if (led_animation_breathing) { + gcr_breathe = gcr_desired; + led_animation_breathe_cur = BREATHE_MIN_STEP; + breathe_dir = 1; + } + } + return false; + case L_T_PTD: + if (record->event.pressed) { + led_animation_direction = !led_animation_direction; + } + return false; + case U_T_AGCR: + if (record->event.pressed && MODS_SHIFT && MODS_CTRL) { + TOGGLE_FLAG_AND_PRINT(usb_gcr_auto, "USB GCR auto mode"); + } + return false; + case DBG_TOG: + if (record->event.pressed) { + TOGGLE_FLAG_AND_PRINT(debug_enable, "Debug mode"); + } + return false; + case DBG_MTRX: + if (record->event.pressed) { + TOGGLE_FLAG_AND_PRINT(debug_matrix, "Debug matrix"); + } + return false; + case DBG_KBD: + if (record->event.pressed) { + TOGGLE_FLAG_AND_PRINT(debug_keyboard, "Debug keyboard"); + } + return false; + case DBG_MOU: + if (record->event.pressed) { + TOGGLE_FLAG_AND_PRINT(debug_mouse, "Debug mouse"); + } + return false; + case MD_BOOT: + if (record->event.pressed) { + key_timer = timer_read32(); + } else { + if (timer_elapsed32(key_timer) >= 500) { + reset_keyboard(); + } + } + return false; + default: + return true; //Process all other keycodes normally + } +} + +led_instruction_t led_instructions[] = { + //Please see ../default_md/keymap.c for examples + + //All LEDs use the user's selected pattern (this is the factory default) + { .flags = LED_FLAG_USE_ROTATE_PATTERN }, + + //end must be set to 1 to indicate end of instruction set + { .end = 1 } +}; diff --git a/keyboards/massdrop/alt/keymaps/mac_md/rules.mk b/keyboards/massdrop/alt/keymaps/mac_md/rules.mk new file mode 100644 index 00000000000..064a6f54c1f --- /dev/null +++ b/keyboards/massdrop/alt/keymaps/mac_md/rules.mk @@ -0,0 +1,2 @@ +# This keymap requires Massdrop Configurator support +OPT_DEFS += -DUSE_MASSDROP_CONFIGURATOR diff --git a/keyboards/massdrop/alt/keymaps/reywood/README.md b/keyboards/massdrop/alt/keymaps/reywood/README.md new file mode 100644 index 00000000000..5ee630dfb80 --- /dev/null +++ b/keyboards/massdrop/alt/keymaps/reywood/README.md @@ -0,0 +1,5 @@ +# THIS KEYMAP IS BROKEN + +The CTRL and ALT have both been switched to using the QMK RGB Matrix system, +rendering any custom effects that used the old, custom Massdrop lighting system, +BROKEN. diff --git a/keyboards/massdrop/alt/keymaps/reywood/rules.mk b/keyboards/massdrop/alt/keymaps/reywood/rules.mk index b5b961a0f3b..956d1c700c2 100644 --- a/keyboards/massdrop/alt/keymaps/reywood/rules.mk +++ b/keyboards/massdrop/alt/keymaps/reywood/rules.mk @@ -1,6 +1,4 @@ # project specific files -SRC = led_programs.c -SRC += matrix.c SRC += rgb_matrix_user.c #For platform and packs @@ -32,3 +30,6 @@ HD44780_ENABLE = no # Enable support for HD44780 based LCDs (+400) VIRTSER_ENABLE = no # USB Serial Driver RAW_ENABLE = no # Raw device AUTO_SHIFT_ENABLE = no # Auto Shift + +# This keymap requires Massdrop Configurator support +OPT_DEFS += -DUSE_MASSDROP_CONFIGURATOR diff --git a/keyboards/massdrop/alt/rules.mk b/keyboards/massdrop/alt/rules.mk index c5539158f58..aa45c68056d 100644 --- a/keyboards/massdrop/alt/rules.mk +++ b/keyboards/massdrop/alt/rules.mk @@ -1,6 +1,6 @@ # project specific files -SRC = led_programs.c -SRC += matrix.c +SRC = matrix.c +SRC += config_led.c #For platform and packs ARM_ATSAM = SAMD51J18A @@ -31,3 +31,6 @@ HD44780_ENABLE = no # Enable support for HD44780 based LCDs (+400) VIRTSER_ENABLE = no # USB Serial Driver RAW_ENABLE = no # Raw device AUTO_SHIFT_ENABLE = no # Auto Shift + +# Custom RGB matrix handling +RGB_MATRIX_ENABLE = custom diff --git a/keyboards/massdrop/ctrl/config.h b/keyboards/massdrop/ctrl/config.h index 71ccac0f399..df2e5092163 100644 --- a/keyboards/massdrop/ctrl/config.h +++ b/keyboards/massdrop/ctrl/config.h @@ -119,3 +119,10 @@ along with this program. If not, see . //#define NO_ACTION_ONESHOT //#define NO_ACTION_MACRO //#define NO_ACTION_FUNCTION + +#define RGB_MATRIX_KEYPRESSES +#define RGB_MATRIX_LED_PROCESS_LIMIT 15 +#define RGB_MATRIX_LED_FLUSH_LIMIT 10 +#define RGB_MATRIX_EXTRA_TOG + +#include "config_led.h" diff --git a/keyboards/massdrop/ctrl/config_led.c b/keyboards/massdrop/ctrl/config_led.c new file mode 100644 index 00000000000..afdbf3a2227 --- /dev/null +++ b/keyboards/massdrop/ctrl/config_led.c @@ -0,0 +1,144 @@ +#ifdef RGB_MATRIX_ENABLE +#include "ctrl.h" + +#include "led_matrix.h" +#include "rgb_matrix.h" +#include "config_led.h" + +const rgb_led g_rgb_leds[DRIVER_LED_TOTAL] = { + // KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR, KC_SLCK, KC_PAUS + { { 0|(0<<4) }, { 7, 5 }, 0 }, + { { 0|(1<<4) }, { 31, 5 }, 0 }, + { { 0|(2<<4) }, { 43, 5 }, 0 }, + { { 0|(3<<4) }, { 55, 5 }, 0 }, + { { 0|(4<<4) }, { 67, 5 }, 0 }, + { { 0|(5<<4) }, { 85, 5 }, 0 }, + { { 0|(6<<4) }, { 97, 5 }, 0 }, + { { 0|(7<<4) }, { 109, 5 }, 0 }, + { { 6|(0<<4) }, { 121, 5 }, 0 }, + { { 6|(1<<4) }, { 139, 5 }, 0 }, + { { 6|(2<<4) }, { 151, 5 }, 0 }, + { { 6|(3<<4) }, { 163, 5 }, 0 }, + { { 6|(4<<4) }, { 175, 5 }, 0 }, + { { 6|(5<<4) }, { 193, 5 }, 0 }, + { { 6|(6<<4) }, { 205, 5 }, 1 }, + { { 6|(7<<4) }, { 217, 5 }, 0 }, + // KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_INS, KC_HOME, KC_PGUP + { { 1|(0<<4) }, { 7, 20 }, 0 }, + { { 1|(1<<4) }, { 19, 20 }, 0 }, + { { 1|(2<<4) }, { 31, 20 }, 0 }, + { { 1|(3<<4) }, { 43, 20 }, 0 }, + { { 1|(4<<4) }, { 55, 20 }, 0 }, + { { 1|(5<<4) }, { 67, 20 }, 0 }, + { { 1|(6<<4) }, { 79, 20 }, 0 }, + { { 1|(7<<4) }, { 91, 20 }, 0 }, + { { 7|(0<<4) }, { 103, 20 }, 0 }, + { { 7|(1<<4) }, { 115, 20 }, 0 }, + { { 7|(2<<4) }, { 127, 20 }, 0 }, + { { 7|(3<<4) }, { 139, 20 }, 0 }, + { { 7|(4<<4) }, { 151, 20 }, 0 }, + { { 7|(5<<4) }, { 169, 20 }, 0 }, + { { 7|(6<<4) }, { 193, 20 }, 0 }, + { { 7|(7<<4) }, { 205, 20 }, 0 }, + { { 9|(7<<4) }, { 217, 20 }, 0 }, + // KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, KC_END, KC_PGDN + { { 2|(0<<4) }, { 10, 30 }, 0 }, + { { 2|(1<<4) }, { 25, 30 }, 0 }, + { { 2|(2<<4) }, { 37, 30 }, 0 }, + { { 2|(3<<4) }, { 49, 30 }, 0 }, + { { 2|(4<<4) }, { 61, 30 }, 0 }, + { { 2|(5<<4) }, { 73, 30 }, 0 }, + { { 2|(6<<4) }, { 85, 30 }, 0 }, + { { 2|(7<<4) }, { 97, 30 }, 0 }, + { { 8|(0<<4) }, { 109, 30 }, 0 }, + { { 8|(1<<4) }, { 121, 30 }, 0 }, + { { 8|(2<<4) }, { 133, 30 }, 0 }, + { { 8|(3<<4) }, { 145, 30 }, 0 }, + { { 8|(4<<4) }, { 157, 30 }, 0 }, + { { 8|(5<<4) }, { 172, 30 }, 0 }, + { { 8|(6<<4) }, { 193, 30 }, 0 }, + { { 8|(7<<4) }, { 205, 30 }, 0 }, + { { 9|(6<<4) }, { 217, 30 }, 0 }, + // KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT + { { 3|(0<<4) }, { 11, 39 }, 1 }, + { { 3|(1<<4) }, { 28, 39 }, 0 }, + { { 3|(2<<4) }, { 40, 39 }, 0 }, + { { 3|(3<<4) }, { 52, 39 }, 0 }, + { { 3|(4<<4) }, { 64, 39 }, 0 }, + { { 3|(5<<4) }, { 76, 39 }, 0 }, + { { 3|(6<<4) }, { 88, 39 }, 0 }, + { { 3|(7<<4) }, { 100, 39 }, 0 }, + { { 9|(0<<4) }, { 112, 39 }, 0 }, + { { 9|(1<<4) }, { 124, 39 }, 0 }, + { { 9|(2<<4) }, { 136, 39 }, 0 }, + { { 9|(3<<4) }, { 148, 39 }, 0 }, + { { 9|(4<<4) }, { 168, 39 }, 0 }, + // KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP + { { 4|(0<<4) }, { 14, 49 }, 0 }, + { { 4|(1<<4) }, { 34, 49 }, 0 }, + { { 4|(2<<4) }, { 46, 49 }, 0 }, + { { 4|(3<<4) }, { 58, 49 }, 0 }, + { { 4|(4<<4) }, { 70, 49 }, 0 }, + { { 4|(5<<4) }, { 82, 49 }, 0 }, + { { 4|(6<<4) }, { 94, 49 }, 0 }, + { { 4|(7<<4) }, { 106, 49 }, 0 }, + { { 10|(0<<4) }, { 118, 49 }, 0 }, + { { 10|(1<<4) }, { 130, 49 }, 0 }, + { { 10|(2<<4) }, { 142, 49 }, 0 }, + { { 10|(3<<4) }, { 165, 49 }, 0 }, + { { 9|(5<<4) }, { 205, 49 }, 0 }, + // KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, MO(1), KC_APP, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT + { { 5|(0<<4) }, { 8, 59 }, 0 }, + { { 5|(1<<4) }, { 23, 59 }, 0 }, + { { 5|(2<<4) }, { 38, 59 }, 0 }, + { { 5|(3<<4) }, { 83, 59 }, 0 }, + { { 5|(4<<4) }, { 129, 59 }, 0 }, + { { 5|(5<<4) }, { 144, 59 }, 0 }, + { { 5|(6<<4) }, { 159, 59 }, 0 }, + { { 5|(7<<4) }, { 174, 59 }, 0 }, + { { 10|(4<<4) }, { 193, 59 }, 0 }, + { { 10|(5<<4) }, { 205, 59 }, 0 }, + { { 10|(6<<4) }, { 217, 59 }, 0 }, + // Underglow / Border + { { 0xFF }, { 222, 64 }, 0 }, + { { 0xFF }, { 204, 64 }, 0 }, + { { 0xFF }, { 186, 64 }, 0 }, + { { 0xFF }, { 167, 64 }, 0 }, + { { 0xFF }, { 149, 64 }, 0 }, + { { 0xFF }, { 130, 64 }, 0 }, + { { 0xFF }, { 112, 64 }, 0 }, + { { 0xFF }, { 94, 64 }, 0 }, + { { 0xFF }, { 75, 64 }, 0 }, + { { 0xFF }, { 57, 64 }, 0 }, + { { 0xFF }, { 38, 64 }, 0 }, + { { 0xFF }, { 20, 64 }, 0 }, + { { 0xFF }, { 0, 64 }, 0 }, + { { 0xFF }, { 0, 47 }, 0 }, + { { 0xFF }, { 0, 32 }, 0 }, + { { 0xFF }, { 0, 17 }, 0 }, + { { 0xFF }, { 0, 0 }, 0 }, + { { 0xFF }, { 20, 0 }, 0 }, + { { 0xFF }, { 38, 0 }, 0 }, + { { 0xFF }, { 57, 0 }, 0 }, + { { 0xFF }, { 75, 0 }, 0 }, + { { 0xFF }, { 94, 0 }, 0 }, + { { 0xFF }, { 112, 0 }, 0 }, + { { 0xFF }, { 130, 0 }, 0 }, + { { 0xFF }, { 149, 0 }, 0 }, + { { 0xFF }, { 167, 0 }, 0 }, + { { 0xFF }, { 186, 0 }, 0 }, + { { 0xFF }, { 204, 0 }, 0 }, + { { 0xFF }, { 222, 1 }, 0 }, + { { 0xFF }, { 224, 17 }, 0 }, + { { 0xFF }, { 224, 32 }, 0 }, + { { 0xFF }, { 224, 47 }, 0 }, +}; + +#ifdef USB_LED_INDICATOR_ENABLE +void rgb_matrix_indicators_kb(void) +{ + led_matrix_indicators(); +} +#endif // USB_LED_INDICATOR_ENABLE + +#endif diff --git a/keyboards/massdrop/ctrl/config_led.h b/keyboards/massdrop/ctrl/config_led.h index 471ab7007d1..0c91a0c80ba 100644 --- a/keyboards/massdrop/ctrl/config_led.h +++ b/keyboards/massdrop/ctrl/config_led.h @@ -15,11 +15,11 @@ You should have received a copy of the GNU General Public License along with this program. If not, see . */ -#ifndef _config_led_h_ -#define _config_led_h_ +#pragma once //Define number of ISSI3733 drivers being used (1...16) #define ISSI3733_DRIVER_COUNT 2 +#define DRIVER_LED_TOTAL ISSI3733_LED_COUNT //Hardware address of each driver (Refer to ISSI3733 pdf "Table 1 Slave Address" and keyboard schematic) #define ISSI3773_DRIVER_ADDRESSES { 0xA0, 0xBE } @@ -30,22 +30,25 @@ along with this program. If not, see . //Count of LED bodies #define ISSI3733_LED_COUNT 119 -//Default Global Current Register value (Default brightness 0 - 255) -#define ISSI3733_GCR_DEFAULT 128 - #define LED_GCR_MAX 165 //Max GCR value (0 - 255) WARNING: Raising this value may overload the LED drivers and USB bus #define LED_GCR_STEP 10 //GCR increment/decrement value +#ifdef USE_MASSDROP_CONFIGURATOR +#define ANIMATION_SPEED_STEP 1 + +#define BREATHE_STEP 1 +#define BREATHE_MIN_STEP 0 +#define BREATHE_MAX_STEP 255 +#endif + +//Default Global Current Register value (Default brightness 0 - 255) +#define ISSI3733_GCR_DEFAULT LED_GCR_MAX + //Automatic power rollback and recovery #define V5_HIGH 2540 //5V high level (After low power detect, point at which LEDs are allowed to use more power ) #define V5_LOW 2480 //5V low level (LED power rolled back to stay above this limit) #define V5_CAT 2200 //5V catastrophic level (Host USB port potential to shut down) -#define ANIMATION_SPEED_STEP 1 - -#define BREATHE_MIN_STEP 0 -#define BREATHE_MAX_STEP 255 - //LED Mapping - More practically generated from a spreadsheet program //id: ID of the LED (Sync with PCB callouts) //x: Physical X coordinate of LED (units do not matter) @@ -187,5 +190,3 @@ along with this program. If not, see . #define USB_LED_COMPOSE_SCANCODE 255 #define USB_LED_KANA_SCANCODE 255 #endif //USB_LED_INDICATOR_ENABLE - -#endif //_config_led_h_ diff --git a/keyboards/massdrop/ctrl/keymaps/default/keymap.c b/keyboards/massdrop/ctrl/keymaps/default/keymap.c index cdb627f9c4b..182abbbad4f 100644 --- a/keyboards/massdrop/ctrl/keymaps/default/keymap.c +++ b/keyboards/massdrop/ctrl/keymaps/default/keymap.c @@ -1,25 +1,13 @@ #include QMK_KEYBOARD_H enum ctrl_keycodes { - L_BRI = SAFE_RANGE, //LED Brightness Increase - L_BRD, //LED Brightness Decrease - L_PTN, //LED Pattern Select Next - L_PTP, //LED Pattern Select Previous - L_PSI, //LED Pattern Speed Increase - L_PSD, //LED Pattern Speed Decrease - L_T_MD, //LED Toggle Mode - L_T_ONF, //LED Toggle On / Off - L_ON, //LED On - L_OFF, //LED Off - L_T_BR, //LED Toggle Breath Effect - L_T_PTD, //LED Toggle Scrolling Pattern Direction - U_T_AUTO, //USB Extra Port Toggle Auto Detect / Always Active - U_T_AGCR, //USB Toggle Automatic GCR control - DBG_TOG, //DEBUG Toggle On / Off - DBG_MTRX, //DEBUG Toggle Matrix Prints - DBG_KBD, //DEBUG Toggle Keyboard Prints - DBG_MOU, //DEBUG Toggle Mouse Prints - MD_BOOT, //Restart into bootloader after hold timeout + U_T_AUTO = SAFE_RANGE, //USB Extra Port Toggle Auto Detect / Always Active + U_T_AGCR, //USB Toggle Automatic GCR control + DBG_TOG, //DEBUG Toggle On / Off + DBG_MTRX, //DEBUG Toggle Matrix Prints + DBG_KBD, //DEBUG Toggle Keyboard Prints + DBG_MOU, //DEBUG Toggle Mouse Prints + MD_BOOT, //Restart into bootloader after hold timeout }; #define TG_NKRO MAGIC_TOGGLE_NKRO //Toggle 6KRO / NKRO mode @@ -36,21 +24,21 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, MO(1), KC_APP, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT \ ), [1] = LAYOUT( - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_MUTE, KC_TRNS, KC_TRNS, \ - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_MPLY, KC_MSTP, KC_VOLU, \ - L_T_BR, L_PSD, L_BRI, L_PSI, KC_TRNS, KC_TRNS, KC_TRNS, U_T_AUTO,U_T_AGCR,KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_MPRV, KC_MNXT, KC_VOLD, \ - L_T_PTD, L_PTP, L_BRD, L_PTN, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \ - KC_TRNS, L_T_MD, L_T_ONF, KC_TRNS, KC_TRNS, MD_BOOT, TG_NKRO, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \ - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS \ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_MUTE, _______, _______, \ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_MPLY, KC_MSTP, KC_VOLU, \ + _______, RGB_SPD, RGB_VAI, RGB_SPI, RGB_HUI, RGB_SAI, _______, U_T_AUTO,U_T_AGCR,_______, _______, _______, _______, _______, KC_MPRV, KC_MNXT, KC_VOLD, \ + _______, RGB_RMOD,RGB_VAD, RGB_MOD, RGB_HUD, RGB_SAD, _______, _______, _______, _______, _______, _______, _______, \ + _______, RGB_TOG, _______, _______, _______, MD_BOOT, TG_NKRO, _______, _______, _______, _______, _______, _______, \ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ \ ), /* [X] = LAYOUT( - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \ - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \ - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \ - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \ - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, TG_NKRO, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \ - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS \ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ + _______, _______, _______, _______, _______, _______, TG_NKRO, _______, _______, _______, _______, _______, _______, \ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ \ ), */ }; @@ -71,82 +59,6 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) { static uint32_t key_timer; switch (keycode) { - case L_BRI: - if (record->event.pressed) { - if (LED_GCR_STEP > LED_GCR_MAX - gcr_desired) gcr_desired = LED_GCR_MAX; - else gcr_desired += LED_GCR_STEP; - if (led_animation_breathing) gcr_breathe = gcr_desired; - } - return false; - case L_BRD: - if (record->event.pressed) { - if (LED_GCR_STEP > gcr_desired) gcr_desired = 0; - else gcr_desired -= LED_GCR_STEP; - if (led_animation_breathing) gcr_breathe = gcr_desired; - } - return false; - case L_PTN: - if (record->event.pressed) { - if (led_animation_id == led_setups_count - 1) led_animation_id = 0; - else led_animation_id++; - } - return false; - case L_PTP: - if (record->event.pressed) { - if (led_animation_id == 0) led_animation_id = led_setups_count - 1; - else led_animation_id--; - } - return false; - case L_PSI: - if (record->event.pressed) { - led_animation_speed += ANIMATION_SPEED_STEP; - } - return false; - case L_PSD: - if (record->event.pressed) { - led_animation_speed -= ANIMATION_SPEED_STEP; - if (led_animation_speed < 0) led_animation_speed = 0; - } - return false; - case L_T_MD: - if (record->event.pressed) { - led_lighting_mode++; - if (led_lighting_mode > LED_MODE_MAX_INDEX) led_lighting_mode = LED_MODE_NORMAL; - } - return false; - case L_T_ONF: - if (record->event.pressed) { - led_enabled = !led_enabled; - I2C3733_Control_Set(led_enabled); - } - return false; - case L_ON: - if (record->event.pressed) { - led_enabled = 1; - I2C3733_Control_Set(led_enabled); - } - return false; - case L_OFF: - if (record->event.pressed) { - led_enabled = 0; - I2C3733_Control_Set(led_enabled); - } - return false; - case L_T_BR: - if (record->event.pressed) { - led_animation_breathing = !led_animation_breathing; - if (led_animation_breathing) { - gcr_breathe = gcr_desired; - led_animation_breathe_cur = BREATHE_MIN_STEP; - breathe_dir = 1; - } - } - return false; - case L_T_PTD: - if (record->event.pressed) { - led_animation_direction = !led_animation_direction; - } - return false; case U_T_AUTO: if (record->event.pressed && MODS_SHIFT && MODS_CTRL) { TOGGLE_FLAG_AND_PRINT(usb_extra_manual, "USB extra port manual mode"); diff --git a/keyboards/massdrop/ctrl/keymaps/default_md/keymap.c b/keyboards/massdrop/ctrl/keymaps/default_md/keymap.c new file mode 100644 index 00000000000..16f88ffe1dc --- /dev/null +++ b/keyboards/massdrop/ctrl/keymaps/default_md/keymap.c @@ -0,0 +1,226 @@ +#include QMK_KEYBOARD_H + +enum ctrl_keycodes { + L_BRI = SAFE_RANGE, //LED Brightness Increase //Working + L_BRD, //LED Brightness Decrease //Working + L_PTN, //LED Pattern Select Next //Working + L_PTP, //LED Pattern Select Previous //Working + L_PSI, //LED Pattern Speed Increase //Working + L_PSD, //LED Pattern Speed Decrease //Working + L_T_MD, //LED Toggle Mode //Working + L_T_ONF, //LED Toggle On / Off //Broken + L_ON, //LED On //Broken + L_OFF, //LED Off //Broken + L_T_BR, //LED Toggle Breath Effect //Working + L_T_PTD, //LED Toggle Scrolling Pattern Direction //Working + U_T_AGCR, //USB Toggle Automatic GCR control //Working + DBG_TOG, //DEBUG Toggle On / Off // + DBG_MTRX, //DEBUG Toggle Matrix Prints // + DBG_KBD, //DEBUG Toggle Keyboard Prints // + DBG_MOU, //DEBUG Toggle Mouse Prints // + MD_BOOT //Restart into bootloader after hold timeout //Working +}; + +#define TG_NKRO MAGIC_TOGGLE_NKRO //Toggle 6KRO / NKRO mode + +keymap_config_t keymap_config; + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [0] = LAYOUT( + KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR, KC_SLCK, KC_PAUS, \ + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_INS, KC_HOME, KC_PGUP, \ + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, KC_END, KC_PGDN, \ + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, \ + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, \ + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, MO(1), KC_APP, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT \ + ), + [1] = LAYOUT( + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_MUTE, _______, _______, \ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_MPLY, KC_MSTP, KC_VOLU, \ + L_T_BR, L_PSD, L_BRI, L_PSI, _______, _______, _______, _______, U_T_AGCR,_______, _______, _______, _______, _______, KC_MPRV, KC_MNXT, KC_VOLD, \ + L_T_PTD, L_PTP, L_BRD, L_PTN, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ + _______, L_T_MD, L_T_ONF, _______, _______, MD_BOOT, TG_NKRO, _______, _______, _______, _______, _______, _______, \ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ \ + ), + /* + [X] = LAYOUT( + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ + _______, _______, _______, _______, _______, _______, TG_NKRO, _______, _______, _______, _______, _______, _______, \ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ \ + ), + */ +}; + +// Runs just one time when the keyboard initializes. +void matrix_init_user(void) { +}; + +// Runs constantly in the background, in a loop. +void matrix_scan_user(void) { +}; + +#define MODS_SHIFT (get_mods() & MOD_BIT(KC_LSHIFT) || get_mods() & MOD_BIT(KC_RSHIFT)) +#define MODS_CTRL (get_mods() & MOD_BIT(KC_LCTL) || get_mods() & MOD_BIT(KC_RCTRL)) +#define MODS_ALT (get_mods() & MOD_BIT(KC_LALT) || get_mods() & MOD_BIT(KC_RALT)) + +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + static uint32_t key_timer; + + switch (keycode) { + case L_BRI: + if (record->event.pressed) { + if (LED_GCR_STEP > LED_GCR_MAX - gcr_desired) gcr_desired = LED_GCR_MAX; + else gcr_desired += LED_GCR_STEP; + if (led_animation_breathing) gcr_breathe = gcr_desired; + } + return false; + case L_BRD: + if (record->event.pressed) { + if (LED_GCR_STEP > gcr_desired) gcr_desired = 0; + else gcr_desired -= LED_GCR_STEP; + if (led_animation_breathing) gcr_breathe = gcr_desired; + } + return false; + case L_PTN: + if (record->event.pressed) { + if (led_animation_id == led_setups_count - 1) led_animation_id = 0; + else led_animation_id++; + } + return false; + case L_PTP: + if (record->event.pressed) { + if (led_animation_id == 0) led_animation_id = led_setups_count - 1; + else led_animation_id--; + } + return false; + case L_PSI: + if (record->event.pressed) { + led_animation_speed += ANIMATION_SPEED_STEP; + } + return false; + case L_PSD: + if (record->event.pressed) { + led_animation_speed -= ANIMATION_SPEED_STEP; + if (led_animation_speed < 0) led_animation_speed = 0; + } + return false; + case L_T_MD: + if (record->event.pressed) { + led_lighting_mode++; + if (led_lighting_mode > LED_MODE_MAX_INDEX) led_lighting_mode = LED_MODE_NORMAL; + } + return false; + case L_T_ONF: + if (record->event.pressed) { + led_enabled = !led_enabled; + I2C3733_Control_Set(led_enabled); + } + return false; + case L_ON: + if (record->event.pressed) { + led_enabled = 1; + I2C3733_Control_Set(led_enabled); + } + return false; + case L_OFF: + if (record->event.pressed) { + led_enabled = 0; + I2C3733_Control_Set(led_enabled); + } + return false; + case L_T_BR: + if (record->event.pressed) { + led_animation_breathing = !led_animation_breathing; + if (led_animation_breathing) { + gcr_breathe = gcr_desired; + led_animation_breathe_cur = BREATHE_MIN_STEP; + breathe_dir = 1; + } + } + return false; + case L_T_PTD: + if (record->event.pressed) { + led_animation_direction = !led_animation_direction; + } + return false; + case U_T_AGCR: + if (record->event.pressed && MODS_SHIFT && MODS_CTRL) { + TOGGLE_FLAG_AND_PRINT(usb_gcr_auto, "USB GCR auto mode"); + } + return false; + case DBG_TOG: + if (record->event.pressed) { + TOGGLE_FLAG_AND_PRINT(debug_enable, "Debug mode"); + } + return false; + case DBG_MTRX: + if (record->event.pressed) { + TOGGLE_FLAG_AND_PRINT(debug_matrix, "Debug matrix"); + } + return false; + case DBG_KBD: + if (record->event.pressed) { + TOGGLE_FLAG_AND_PRINT(debug_keyboard, "Debug keyboard"); + } + return false; + case DBG_MOU: + if (record->event.pressed) { + TOGGLE_FLAG_AND_PRINT(debug_mouse, "Debug mouse"); + } + return false; + case MD_BOOT: + if (record->event.pressed) { + key_timer = timer_read32(); + } else { + if (timer_elapsed32(key_timer) >= 500) { + reset_keyboard(); + } + } + return false; + default: + return true; //Process all other keycodes normally + } +} + +led_instruction_t led_instructions[] = { + //LEDs are normally inactive, no processing is performed on them + //Flags are used in matching criteria for an LED to be active and indicate how to color it + //Flags can be found in tmk_core/protocol/arm_atsam/led_matrix.h (prefixed with LED_FLAG_) + //LED IDs can be found in config_led.h in the keyboard's directory + //Examples are below + + //All LEDs use the user's selected pattern (this is the factory default) + { .flags = LED_FLAG_USE_ROTATE_PATTERN }, + + //Specific LEDs use the user's selected pattern while all others are off + // { .flags = LED_FLAG_MATCH_ID | LED_FLAG_USE_ROTATE_PATTERN, .id0 = 0xFFFFFFFF, .id1 = 0xAAAAAAAA, .id2 = 0x55555555, .id3 = 0x11111111 }, + + //Specific LEDs use specified RGB values while all others are off + // { .flags = LED_FLAG_MATCH_ID | LED_FLAG_USE_RGB, .id0 = 0xFF, .id1 = 0x00FF, .id2 = 0x0000FF00, .id3 = 0xFF000000, .r = 75, .g = 150, .b = 225 }, + + //All LEDs use the user's selected pattern + //On layer 1, all key LEDs (except the top row which keeps active pattern) are red while all edge LEDs are green + //When layer 1 is active, key LEDs use red (id0 32 - 17: 1111 1111 1111 1111 0000 0000 0000 0000 = 0xFFFF0000) (except top row 16 - 1) + //When layer 1 is active, key LEDs use red (id1 64 - 33: 1111 1111 1111 1111 1111 1111 1111 1111 = 0xFFFFFFFF) + //When layer 1 is active, key LEDs use red (id2 87 - 65: 0000 0000 0111 1111 1111 1111 1111 1111 = 0x007FFFFF) + //When layer 1 is active, edge LEDs use green (id2 95 - 88: 1111 1111 1000 0000 0000 0000 0000 0000 = 0xFF800000) + //When layer 1 is active, edge LEDs use green (id3 119 - 96: 0000 0000 1111 1111 1111 1111 1111 1111 = 0x00FFFFFF) + // { .flags = LED_FLAG_USE_ROTATE_PATTERN }, + // { .flags = LED_FLAG_MATCH_ID | LED_FLAG_MATCH_LAYER | LED_FLAG_USE_RGB, .id0 = 0xFFFF0000, .id1 = 0xFFFFFFFF, .id2 = 0x007FFFFF, .r = 255, .layer = 1 }, + // { .flags = LED_FLAG_MATCH_ID | LED_FLAG_MATCH_LAYER | LED_FLAG_USE_RGB, .id2 = 0xFF800000, .id3 = 0x00FFFFFF, .g = 127, .layer = 1 }, + + //All key LEDs use red while edge LEDs use the active pattern + //All key LEDs use red (id0 32 - 1: 1111 1111 1111 1111 1111 1111 1111 1111 = 0xFFFFFFFF) + //All key LEDs use red (id1 64 - 33: 1111 1111 1111 1111 1111 1111 1111 1111 = 0xFFFFFFFF) + //All key LEDs use red (id2 87 - 65: 0000 0000 0111 1111 1111 1111 1111 1111 = 0x007FFFFF) + //Edge uses active pattern (id2 95 - 88: 1111 1111 1000 0000 0000 0000 0000 0000 = 0xFF800000) + //Edge uses active pattern (id3 119 - 96: 0000 0000 1111 1111 1111 1111 1111 1111 = 0x00FFFFFF) + // { .flags = LED_FLAG_MATCH_ID | LED_FLAG_USE_RGB, .id0 = 0xFFFFFFFF, .id1 = 0xFFFFFFFF, .id2 = 0x007FFFFF, .r = 255 }, + // { .flags = LED_FLAG_MATCH_ID | LED_FLAG_USE_ROTATE_PATTERN , .id2 = 0xFF800000, .id3 = 0x00FFFFFF }, + + //end must be set to 1 to indicate end of instruction set + { .end = 1 } +}; diff --git a/keyboards/massdrop/ctrl/keymaps/default_md/rules.mk b/keyboards/massdrop/ctrl/keymaps/default_md/rules.mk new file mode 100644 index 00000000000..064a6f54c1f --- /dev/null +++ b/keyboards/massdrop/ctrl/keymaps/default_md/rules.mk @@ -0,0 +1,2 @@ +# This keymap requires Massdrop Configurator support +OPT_DEFS += -DUSE_MASSDROP_CONFIGURATOR diff --git a/keyboards/massdrop/ctrl/keymaps/mac/keymap.c b/keyboards/massdrop/ctrl/keymaps/mac/keymap.c index e41b5eba20c..41cf8275724 100644 --- a/keyboards/massdrop/ctrl/keymaps/mac/keymap.c +++ b/keyboards/massdrop/ctrl/keymaps/mac/keymap.c @@ -1,25 +1,13 @@ #include QMK_KEYBOARD_H enum ctrl_keycodes { - L_BRI = SAFE_RANGE, //LED Brightness Increase - L_BRD, //LED Brightness Decrease - L_PTN, //LED Pattern Select Next - L_PTP, //LED Pattern Select Previous - L_PSI, //LED Pattern Speed Increase - L_PSD, //LED Pattern Speed Decrease - L_T_MD, //LED Toggle Mode - L_T_ONF, //LED Toggle On / Off - L_ON, //LED On - L_OFF, //LED Off - L_T_BR, //LED Toggle Breath Effect - L_T_PTD, //LED Toggle Scrolling Pattern Direction - U_T_AUTO, //USB Extra Port Toggle Auto Detect / Always Active - U_T_AGCR, //USB Toggle Automatic GCR control - DBG_TOG, //DEBUG Toggle On / Off - DBG_MTRX, //DEBUG Toggle Matrix Prints - DBG_KBD, //DEBUG Toggle Keyboard Prints - DBG_MOU, //DEBUG Toggle Mouse Prints - MD_BOOT, //Restart into bootloader after hold timeout + U_T_AUTO = SAFE_RANGE, //USB Extra Port Toggle Auto Detect / Always Active + U_T_AGCR, //USB Toggle Automatic GCR control + DBG_TOG, //DEBUG Toggle On / Off + DBG_MTRX, //DEBUG Toggle Matrix Prints + DBG_KBD, //DEBUG Toggle Keyboard Prints + DBG_MOU, //DEBUG Toggle Mouse Prints + MD_BOOT, //Restart into bootloader after hold timeout }; #define TG_NKRO MAGIC_TOGGLE_NKRO //Toggle 6KRO / NKRO mode @@ -36,21 +24,21 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { KC_LCTL, KC_LALT, KC_LGUI, KC_SPC, KC_RGUI, MO(1), KC_APP, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT \ ), [1] = LAYOUT( - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_MUTE, KC_TRNS, KC_TRNS, \ - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_MPLY, KC_MSTP, KC_VOLU, \ - L_T_BR, L_PSD, L_BRI, L_PSI, KC_TRNS, KC_TRNS, KC_TRNS, U_T_AUTO,U_T_AGCR,KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_MPRV, KC_MNXT, KC_VOLD, \ - L_T_PTD, L_PTP, L_BRD, L_PTN, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \ - KC_TRNS, L_T_MD, L_T_ONF, KC_TRNS, KC_TRNS, MD_BOOT, TG_NKRO, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \ - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS \ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_MUTE, _______, _______, \ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_MPLY, KC_MSTP, KC_VOLU, \ + _______, RGB_SPD, RGB_VAI, RGB_SPI, RGB_HUI, RGB_SAI, _______, U_T_AUTO,U_T_AGCR,_______, _______, _______, _______, _______, KC_MPRV, KC_MNXT, KC_VOLD, \ + _______, RGB_RMOD,RGB_VAD, RGB_MOD, RGB_HUD, RGB_SAD, _______, _______, _______, _______, _______, _______, _______, \ + _______, RGB_TOG, _______, _______, _______, MD_BOOT, TG_NKRO, _______, _______, _______, _______, _______, _______, \ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ \ ), /* [X] = LAYOUT( - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \ - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \ - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \ - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \ - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, TG_NKRO, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \ - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS \ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ + _______, _______, _______, _______, _______, _______, TG_NKRO, _______, _______, _______, _______, _______, _______, \ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ \ ), */ }; @@ -71,82 +59,6 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) { static uint32_t key_timer; switch (keycode) { - case L_BRI: - if (record->event.pressed) { - if (LED_GCR_STEP > LED_GCR_MAX - gcr_desired) gcr_desired = LED_GCR_MAX; - else gcr_desired += LED_GCR_STEP; - if (led_animation_breathing) gcr_breathe = gcr_desired; - } - return false; - case L_BRD: - if (record->event.pressed) { - if (LED_GCR_STEP > gcr_desired) gcr_desired = 0; - else gcr_desired -= LED_GCR_STEP; - if (led_animation_breathing) gcr_breathe = gcr_desired; - } - return false; - case L_PTN: - if (record->event.pressed) { - if (led_animation_id == led_setups_count - 1) led_animation_id = 0; - else led_animation_id++; - } - return false; - case L_PTP: - if (record->event.pressed) { - if (led_animation_id == 0) led_animation_id = led_setups_count - 1; - else led_animation_id--; - } - return false; - case L_PSI: - if (record->event.pressed) { - led_animation_speed += ANIMATION_SPEED_STEP; - } - return false; - case L_PSD: - if (record->event.pressed) { - led_animation_speed -= ANIMATION_SPEED_STEP; - if (led_animation_speed < 0) led_animation_speed = 0; - } - return false; - case L_T_MD: - if (record->event.pressed) { - led_lighting_mode++; - if (led_lighting_mode > LED_MODE_MAX_INDEX) led_lighting_mode = LED_MODE_NORMAL; - } - return false; - case L_T_ONF: - if (record->event.pressed) { - led_enabled = !led_enabled; - I2C3733_Control_Set(led_enabled); - } - return false; - case L_ON: - if (record->event.pressed) { - led_enabled = 1; - I2C3733_Control_Set(led_enabled); - } - return false; - case L_OFF: - if (record->event.pressed) { - led_enabled = 0; - I2C3733_Control_Set(led_enabled); - } - return false; - case L_T_BR: - if (record->event.pressed) { - led_animation_breathing = !led_animation_breathing; - if (led_animation_breathing) { - gcr_breathe = gcr_desired; - led_animation_breathe_cur = BREATHE_MIN_STEP; - breathe_dir = 1; - } - } - return false; - case L_T_PTD: - if (record->event.pressed) { - led_animation_direction = !led_animation_direction; - } - return false; case U_T_AUTO: if (record->event.pressed && MODS_SHIFT && MODS_CTRL) { TOGGLE_FLAG_AND_PRINT(usb_extra_manual, "USB extra port manual mode"); diff --git a/keyboards/massdrop/ctrl/keymaps/mac_md/keymap.c b/keyboards/massdrop/ctrl/keymaps/mac_md/keymap.c new file mode 100644 index 00000000000..6dfc2137862 --- /dev/null +++ b/keyboards/massdrop/ctrl/keymaps/mac_md/keymap.c @@ -0,0 +1,196 @@ +#include QMK_KEYBOARD_H + +enum ctrl_keycodes { + L_BRI = SAFE_RANGE, //LED Brightness Increase //Working + L_BRD, //LED Brightness Decrease //Working + L_PTN, //LED Pattern Select Next //Working + L_PTP, //LED Pattern Select Previous //Working + L_PSI, //LED Pattern Speed Increase //Working + L_PSD, //LED Pattern Speed Decrease //Working + L_T_MD, //LED Toggle Mode //Working + L_T_ONF, //LED Toggle On / Off //Broken + L_ON, //LED On //Broken + L_OFF, //LED Off //Broken + L_T_BR, //LED Toggle Breath Effect //Working + L_T_PTD, //LED Toggle Scrolling Pattern Direction //Working + U_T_AGCR, //USB Toggle Automatic GCR control //Working + DBG_TOG, //DEBUG Toggle On / Off // + DBG_MTRX, //DEBUG Toggle Matrix Prints // + DBG_KBD, //DEBUG Toggle Keyboard Prints // + DBG_MOU, //DEBUG Toggle Mouse Prints // + MD_BOOT //Restart into bootloader after hold timeout //Working +}; + +#define TG_NKRO MAGIC_TOGGLE_NKRO //Toggle 6KRO / NKRO mode + +keymap_config_t keymap_config; + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [0] = LAYOUT( + KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR, KC_SLCK, KC_PAUS, \ + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_INS, KC_HOME, KC_PGUP, \ + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, KC_END, KC_PGDN, \ + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, \ + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, \ + KC_LCTL, KC_LALT, KC_LGUI, KC_SPC, KC_RGUI, MO(1), KC_APP, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT \ + ), + [1] = LAYOUT( + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_MUTE, _______, _______, \ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_MPLY, KC_MSTP, KC_VOLU, \ + L_T_BR, L_PSD, L_BRI, L_PSI, _______, _______, _______, _______, U_T_AGCR,_______, _______, _______, _______, _______, KC_MPRV, KC_MNXT, KC_VOLD, \ + L_T_PTD, L_PTP, L_BRD, L_PTN, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ + _______, L_T_MD, L_T_ONF, _______, _______, MD_BOOT, TG_NKRO, _______, _______, _______, _______, _______, _______, \ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ \ + ), + /* + [X] = LAYOUT( + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ + _______, _______, _______, _______, _______, _______, TG_NKRO, _______, _______, _______, _______, _______, _______, \ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ \ + ), + */ +}; + +// Runs just one time when the keyboard initializes. +void matrix_init_user(void) { +}; + +// Runs constantly in the background, in a loop. +void matrix_scan_user(void) { +}; + +#define MODS_SHIFT (get_mods() & MOD_BIT(KC_LSHIFT) || get_mods() & MOD_BIT(KC_RSHIFT)) +#define MODS_CTRL (get_mods() & MOD_BIT(KC_LCTL) || get_mods() & MOD_BIT(KC_RCTRL)) +#define MODS_ALT (get_mods() & MOD_BIT(KC_LALT) || get_mods() & MOD_BIT(KC_RALT)) + +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + static uint32_t key_timer; + + switch (keycode) { + case L_BRI: + if (record->event.pressed) { + if (LED_GCR_STEP > LED_GCR_MAX - gcr_desired) gcr_desired = LED_GCR_MAX; + else gcr_desired += LED_GCR_STEP; + if (led_animation_breathing) gcr_breathe = gcr_desired; + } + return false; + case L_BRD: + if (record->event.pressed) { + if (LED_GCR_STEP > gcr_desired) gcr_desired = 0; + else gcr_desired -= LED_GCR_STEP; + if (led_animation_breathing) gcr_breathe = gcr_desired; + } + return false; + case L_PTN: + if (record->event.pressed) { + if (led_animation_id == led_setups_count - 1) led_animation_id = 0; + else led_animation_id++; + } + return false; + case L_PTP: + if (record->event.pressed) { + if (led_animation_id == 0) led_animation_id = led_setups_count - 1; + else led_animation_id--; + } + return false; + case L_PSI: + if (record->event.pressed) { + led_animation_speed += ANIMATION_SPEED_STEP; + } + return false; + case L_PSD: + if (record->event.pressed) { + led_animation_speed -= ANIMATION_SPEED_STEP; + if (led_animation_speed < 0) led_animation_speed = 0; + } + return false; + case L_T_MD: + if (record->event.pressed) { + led_lighting_mode++; + if (led_lighting_mode > LED_MODE_MAX_INDEX) led_lighting_mode = LED_MODE_NORMAL; + } + return false; + case L_T_ONF: + if (record->event.pressed) { + led_enabled = !led_enabled; + I2C3733_Control_Set(led_enabled); + } + return false; + case L_ON: + if (record->event.pressed) { + led_enabled = 1; + I2C3733_Control_Set(led_enabled); + } + return false; + case L_OFF: + if (record->event.pressed) { + led_enabled = 0; + I2C3733_Control_Set(led_enabled); + } + return false; + case L_T_BR: + if (record->event.pressed) { + led_animation_breathing = !led_animation_breathing; + if (led_animation_breathing) { + gcr_breathe = gcr_desired; + led_animation_breathe_cur = BREATHE_MIN_STEP; + breathe_dir = 1; + } + } + return false; + case L_T_PTD: + if (record->event.pressed) { + led_animation_direction = !led_animation_direction; + } + return false; + case U_T_AGCR: + if (record->event.pressed && MODS_SHIFT && MODS_CTRL) { + TOGGLE_FLAG_AND_PRINT(usb_gcr_auto, "USB GCR auto mode"); + } + return false; + case DBG_TOG: + if (record->event.pressed) { + TOGGLE_FLAG_AND_PRINT(debug_enable, "Debug mode"); + } + return false; + case DBG_MTRX: + if (record->event.pressed) { + TOGGLE_FLAG_AND_PRINT(debug_matrix, "Debug matrix"); + } + return false; + case DBG_KBD: + if (record->event.pressed) { + TOGGLE_FLAG_AND_PRINT(debug_keyboard, "Debug keyboard"); + } + return false; + case DBG_MOU: + if (record->event.pressed) { + TOGGLE_FLAG_AND_PRINT(debug_mouse, "Debug mouse"); + } + return false; + case MD_BOOT: + if (record->event.pressed) { + key_timer = timer_read32(); + } else { + if (timer_elapsed32(key_timer) >= 500) { + reset_keyboard(); + } + } + return false; + default: + return true; //Process all other keycodes normally + } +} + +led_instruction_t led_instructions[] = { + //Please see ../default_md/keymap.c for examples + + //All LEDs use the user's selected pattern (this is the factory default) + { .flags = LED_FLAG_USE_ROTATE_PATTERN }, + + //end must be set to 1 to indicate end of instruction set + { .end = 1 } +}; diff --git a/keyboards/massdrop/ctrl/keymaps/mac_md/rules.mk b/keyboards/massdrop/ctrl/keymaps/mac_md/rules.mk new file mode 100644 index 00000000000..064a6f54c1f --- /dev/null +++ b/keyboards/massdrop/ctrl/keymaps/mac_md/rules.mk @@ -0,0 +1,2 @@ +# This keymap requires Massdrop Configurator support +OPT_DEFS += -DUSE_MASSDROP_CONFIGURATOR diff --git a/keyboards/massdrop/ctrl/keymaps/responsive_pattern/README.md b/keyboards/massdrop/ctrl/keymaps/responsive_pattern/README.md new file mode 100644 index 00000000000..5ee630dfb80 --- /dev/null +++ b/keyboards/massdrop/ctrl/keymaps/responsive_pattern/README.md @@ -0,0 +1,5 @@ +# THIS KEYMAP IS BROKEN + +The CTRL and ALT have both been switched to using the QMK RGB Matrix system, +rendering any custom effects that used the old, custom Massdrop lighting system, +BROKEN. diff --git a/keyboards/massdrop/ctrl/keymaps/responsive_pattern/keymap.c b/keyboards/massdrop/ctrl/keymaps/responsive_pattern/keymap.c index 0bdc1521401..58911aa7574 100644 --- a/keyboards/massdrop/ctrl/keymaps/responsive_pattern/keymap.c +++ b/keyboards/massdrop/ctrl/keymaps/responsive_pattern/keymap.c @@ -15,7 +15,6 @@ extern issi3733_led_t *lede; extern issi3733_led_t led_map[]; -extern led_disp_t disp; enum ctrl_keycodes { L_BRI = SAFE_RANGE, //LED Brightness Increase @@ -238,8 +237,6 @@ void led_matrix_run(void) { led_cur = led_map; - disp.frame += 1; - breathe_mult = 1; if (led_animation_breathing) @@ -314,7 +311,7 @@ void led_matrix_run(void) } float pomod; - pomod = (float)(disp.frame % (uint32_t)(1000.0f / led_animation_speed)) / 10.0f * led_animation_speed; + pomod = (float)(g_tick % (uint32_t)(1000.0f / led_animation_speed)) / 10.0f * led_animation_speed; //Add in any moving effects if ((!led_animation_direction && f[fcur].ef & EF_SCR_R) || (led_animation_direction && (f[fcur].ef & EF_SCR_L))) diff --git a/keyboards/massdrop/ctrl/keymaps/responsive_pattern/rules.mk b/keyboards/massdrop/ctrl/keymaps/responsive_pattern/rules.mk new file mode 100644 index 00000000000..064a6f54c1f --- /dev/null +++ b/keyboards/massdrop/ctrl/keymaps/responsive_pattern/rules.mk @@ -0,0 +1,2 @@ +# This keymap requires Massdrop Configurator support +OPT_DEFS += -DUSE_MASSDROP_CONFIGURATOR diff --git a/keyboards/massdrop/ctrl/led_programs.c b/keyboards/massdrop/ctrl/led_programs.c deleted file mode 100644 index ca27016454d..00000000000 --- a/keyboards/massdrop/ctrl/led_programs.c +++ /dev/null @@ -1,120 +0,0 @@ -/* -Copyright 2018 Massdrop Inc. - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see . -*/ - -#include "ctrl.h" -#include "led_matrix.h" - -//Teal <-> Salmon -led_setup_t leds_teal_salmon[] = { - { .hs = 0, .he = 33, .rs = 24, .re = 24, .gs = 215, .ge = 215, .bs = 204, .be = 204, .ef = EF_NONE }, - { .hs = 33, .he = 66, .rs = 24, .re = 255, .gs = 215, .ge = 114, .bs = 204, .be = 118, .ef = EF_NONE }, - { .hs = 66, .he = 100, .rs = 255, .re = 255, .gs = 114, .ge = 114, .bs = 118, .be = 118, .ef = EF_NONE }, - { .end = 1 }, -}; - -//Yellow -led_setup_t leds_yellow[] = { - { .hs = 0, .he = 100, .rs = 255, .re = 255, .gs = 255, .ge = 255, .bs = 0, .be = 0, .ef = EF_NONE }, - { .end = 1 }, -}; - -//Off -led_setup_t leds_off[] = { - { .hs = 0, .he = 100, .rs = 0, .re = 0, .gs = 0, .ge = 0, .bs = 0, .be = 0, .ef = EF_NONE }, - { .end = 1 }, -}; - -//Red -led_setup_t leds_red[] = { - { .hs = 0, .he = 100, .rs = 255, .re = 255, .gs = 0, .ge = 0, .bs = 0, .be = 0, .ef = EF_NONE }, - { .end = 1 }, -}; - -//Green -led_setup_t leds_green[] = { - { .hs = 0, .he = 100, .rs = 0, .re = 0, .gs = 255, .ge = 255, .bs = 0, .be = 0, .ef = EF_NONE }, - { .end = 1 }, -}; - -//Blue -led_setup_t leds_blue[] = { - { .hs = 0, .he = 100, .rs = 0, .re = 0, .gs = 0, .ge = 0, .bs = 255, .be = 255, .ef = EF_NONE }, - { .end = 1 }, -}; - -//White -led_setup_t leds_white[] = { - { .hs = 0, .he = 100, .rs = 255, .re = 255, .gs = 255, .ge = 255, .bs = 255, .be = 255, .ef = EF_NONE }, - { .end = 1 }, -}; - -//White with moving red stripe -led_setup_t leds_white_with_red_stripe[] = { - { .hs = 0, .he = 100, .rs = 255, .re = 255, .gs = 255, .ge = 255, .bs = 255, .be = 255, .ef = EF_NONE }, - { .hs = 0, .he = 15, .rs = 0, .re = 0, .gs = 0, .ge = 255, .bs = 0, .be = 255, .ef = EF_SCR_R | EF_SUBTRACT }, - { .hs = 15, .he = 30, .rs = 0, .re = 0, .gs = 255, .ge = 0, .bs = 255, .be = 0, .ef = EF_SCR_R | EF_SUBTRACT }, - { .end = 1 }, -}; - -//Black with moving red stripe -led_setup_t leds_black_with_red_stripe[] = { - { .hs = 0, .he = 15, .rs = 0, .re = 255, .gs = 0, .ge = 0, .bs = 0, .be = 0, .ef = EF_SCR_R }, - { .hs = 15, .he = 30, .rs = 255, .re = 0, .gs = 0, .ge = 0, .bs = 0, .be = 0, .ef = EF_SCR_R }, - { .end = 1 }, -}; - -//Rainbow no scrolling -led_setup_t leds_rainbow_ns[] = { - { .hs = 0, .he = 16.67, .rs = 255, .re = 255, .gs = 0, .ge = 255, .bs = 0, .be = 0, .ef = EF_OVER }, - { .hs = 16.67, .he = 33.33, .rs = 255, .re = 0, .gs = 255, .ge = 255, .bs = 0, .be = 0, .ef = EF_OVER }, - { .hs = 33.33, .he = 50, .rs = 0, .re = 0, .gs = 255, .ge = 255, .bs = 0, .be = 255, .ef = EF_OVER }, - { .hs = 50, .he = 66.67, .rs = 0, .re = 0, .gs = 255, .ge = 0, .bs = 255, .be = 255, .ef = EF_OVER }, - { .hs = 66.67, .he = 83.33, .rs = 0, .re = 255, .gs = 0, .ge = 0, .bs = 255, .be = 255, .ef = EF_OVER }, - { .hs = 83.33, .he = 100, .rs = 255, .re = 255, .gs = 0, .ge = 0, .bs = 255, .be = 0, .ef = EF_OVER }, - { .end = 1 }, -}; - -//Rainbow scrolling -led_setup_t leds_rainbow_s[] = { - { .hs = 0, .he = 16.67, .rs = 255, .re = 255, .gs = 0, .ge = 255, .bs = 0, .be = 0, .ef = EF_OVER | EF_SCR_R }, - { .hs = 16.67, .he = 33.33, .rs = 255, .re = 0, .gs = 255, .ge = 255, .bs = 0, .be = 0, .ef = EF_OVER | EF_SCR_R }, - { .hs = 33.33, .he = 50, .rs = 0, .re = 0, .gs = 255, .ge = 255, .bs = 0, .be = 255, .ef = EF_OVER | EF_SCR_R }, - { .hs = 50, .he = 66.67, .rs = 0, .re = 0, .gs = 255, .ge = 0, .bs = 255, .be = 255, .ef = EF_OVER | EF_SCR_R }, - { .hs = 66.67, .he = 83.33, .rs = 0, .re = 255, .gs = 0, .ge = 0, .bs = 255, .be = 255, .ef = EF_OVER | EF_SCR_R }, - { .hs = 83.33, .he = 100, .rs = 255, .re = 255, .gs = 0, .ge = 0, .bs = 255, .be = 0, .ef = EF_OVER | EF_SCR_R }, - { .end = 1 }, -}; - -//Add new LED animations here using one from above as example -//The last entry must be { .end = 1 } -//Add the new animation name to the list below following its format - -void *led_setups[] = { - leds_rainbow_s, - leds_rainbow_ns, - leds_teal_salmon, - leds_yellow, - leds_red, - leds_green, - leds_blue, - leds_white, - leds_white_with_red_stripe, - leds_black_with_red_stripe, - leds_off -}; - -const uint8_t led_setups_count = sizeof(led_setups) / sizeof(led_setups[0]); diff --git a/keyboards/massdrop/ctrl/rules.mk b/keyboards/massdrop/ctrl/rules.mk index c5539158f58..aa45c68056d 100644 --- a/keyboards/massdrop/ctrl/rules.mk +++ b/keyboards/massdrop/ctrl/rules.mk @@ -1,6 +1,6 @@ # project specific files -SRC = led_programs.c -SRC += matrix.c +SRC = matrix.c +SRC += config_led.c #For platform and packs ARM_ATSAM = SAMD51J18A @@ -31,3 +31,6 @@ HD44780_ENABLE = no # Enable support for HD44780 based LCDs (+400) VIRTSER_ENABLE = no # USB Serial Driver RAW_ENABLE = no # Raw device AUTO_SHIFT_ENABLE = no # Auto Shift + +# Custom RGB matrix handling +RGB_MATRIX_ENABLE = custom diff --git a/quantum/rgb_matrix.c b/quantum/rgb_matrix.c index 0728e2431fe..413e5777fcd 100644 --- a/quantum/rgb_matrix.c +++ b/quantum/rgb_matrix.c @@ -142,11 +142,28 @@ void rgb_matrix_update_pwm_buffers(void) { } void rgb_matrix_set_color( int index, uint8_t red, uint8_t green, uint8_t blue ) { +#ifdef RGB_MATRIX_EXTRA_TOG + const bool is_key = g_rgb_leds[index].matrix_co.raw != 0xff; + if ( + (rgb_matrix_config.enable == RGB_ZONE_KEYS && !is_key) || + (rgb_matrix_config.enable == RGB_ZONE_UNDER && is_key) + ) { + rgb_matrix_driver.set_color(index, 0, 0, 0); + return; + } +#endif + rgb_matrix_driver.set_color(index, red, green, blue); } void rgb_matrix_set_color_all( uint8_t red, uint8_t green, uint8_t blue ) { +#ifdef RGB_MATRIX_EXTRA_TOG + for (int i = 0; i < DRIVER_LED_TOTAL; i++) { + rgb_matrix_set_color(i, red, green, blue); + } +#else rgb_matrix_driver.set_color_all(red, green, blue); +#endif } bool process_rgb_matrix(uint16_t keycode, keyrecord_t *record) { @@ -494,7 +511,7 @@ void rgb_matrix_set_suspend_state(bool state) { } void rgb_matrix_toggle(void) { - rgb_matrix_config.enable ^= 1; + rgb_matrix_config.enable++; if (!rgb_matrix_config.enable) { rgb_task_state = STARTING; } diff --git a/quantum/rgb_matrix_types.h b/quantum/rgb_matrix_types.h index f7643d2b0c8..908e96da56d 100644 --- a/quantum/rgb_matrix_types.h +++ b/quantum/rgb_matrix_types.h @@ -73,11 +73,18 @@ typedef struct PACKED { uint8_t modifier:1; } rgb_led; +typedef enum { + RGB_ZONE_OFF = 0, + RGB_ZONE_ALL, + RGB_ZONE_KEYS, + RGB_ZONE_UNDER, +} rgb_zone_t; + typedef union { uint32_t raw; struct PACKED { - bool enable :1; - uint8_t mode :7; + uint8_t enable :2; + uint8_t mode :6; uint8_t hue :8; uint8_t sat :8; uint8_t val :8; diff --git a/tmk_core/common/arm_atsam/suspend.c b/tmk_core/common/arm_atsam/suspend.c index e34965df64e..9c2c47d5610 100644 --- a/tmk_core/common/arm_atsam/suspend.c +++ b/tmk_core/common/arm_atsam/suspend.c @@ -35,7 +35,9 @@ void suspend_power_down_kb(void) { */ void suspend_power_down(void) { +#ifdef RGB_MATRIX_ENABLE I2C3733_Control_Set(0); //Disable LED driver +#endif suspend_power_down_kb(); } @@ -75,10 +77,9 @@ void suspend_wakeup_init_kb(void) { * FIXME: needs doc */ void suspend_wakeup_init(void) { - /* If LEDs are set to enabled, enable the hardware */ - if (led_enabled) { - I2C3733_Control_Set(1); - } +#ifdef RGB_MATRIX_ENABLE + I2C3733_Control_Set(1); +#endif suspend_wakeup_init_kb(); } diff --git a/tmk_core/protocol/arm_atsam.mk b/tmk_core/protocol/arm_atsam.mk index 04e02790a0d..8d6f724f099 100644 --- a/tmk_core/protocol/arm_atsam.mk +++ b/tmk_core/protocol/arm_atsam.mk @@ -4,7 +4,10 @@ SRC += $(ARM_ATSAM_DIR)/adc.c SRC += $(ARM_ATSAM_DIR)/clks.c SRC += $(ARM_ATSAM_DIR)/d51_util.c SRC += $(ARM_ATSAM_DIR)/i2c_master.c -SRC += $(ARM_ATSAM_DIR)/led_matrix.c +ifeq ($(RGB_MATRIX_ENABLE),custom) + SRC += $(ARM_ATSAM_DIR)/led_matrix_programs.c + SRC += $(ARM_ATSAM_DIR)/led_matrix.c +endif SRC += $(ARM_ATSAM_DIR)/main_arm_atsam.c SRC += $(ARM_ATSAM_DIR)/spi.c SRC += $(ARM_ATSAM_DIR)/startup.c diff --git a/tmk_core/protocol/arm_atsam/arm_atsam_protocol.h b/tmk_core/protocol/arm_atsam/arm_atsam_protocol.h index 928af8c7e17..88109186aad 100644 --- a/tmk_core/protocol/arm_atsam/arm_atsam_protocol.h +++ b/tmk_core/protocol/arm_atsam/arm_atsam_protocol.h @@ -34,7 +34,10 @@ along with this program. If not, see . #ifndef MD_BOOTLOADER #include "main_arm_atsam.h" +#ifdef RGB_MATRIX_ENABLE #include "led_matrix.h" +#include "rgb_matrix.h" +#endif #include "issi3733_driver.h" #include "./usb/compiler.h" #include "./usb/udc.h" diff --git a/tmk_core/protocol/arm_atsam/i2c_master.c b/tmk_core/protocol/arm_atsam/i2c_master.c index d91a851f377..1741d9ac5b0 100644 --- a/tmk_core/protocol/arm_atsam/i2c_master.c +++ b/tmk_core/protocol/arm_atsam/i2c_master.c @@ -17,7 +17,7 @@ along with this program. If not, see . #include "arm_atsam_protocol.h" -#ifndef MD_BOOTLOADER +#if !defined(MD_BOOTLOADER) && defined(RGB_MATRIX_ENABLE) #include @@ -37,7 +37,7 @@ static uint8_t dma_sendbuf[I2C_DMA_MAX_SEND]; //Data being written to I2C volatile uint8_t i2c_led_q_running; -#endif //MD_BOOTLOADER +#endif // !defined(MD_BOOTLOADER) && defined(RGB_MATRIX_ENABLE) void i2c0_init(void) { @@ -112,7 +112,7 @@ void i2c0_stop(void) } } -#ifndef MD_BOOTLOADER +#if !defined(MD_BOOTLOADER) && defined(RGB_MATRIX_ENABLE) void i2c1_init(void) { DBGC(DC_I2C1_INIT_BEGIN); @@ -583,4 +583,4 @@ uint8_t i2c_led_q_run(void) return 1; } -#endif //MD_BOOTLOADER +#endif // !defined(MD_BOOTLOADER) && defined(RGB_MATRIX_ENABLE) diff --git a/tmk_core/protocol/arm_atsam/led_matrix.c b/tmk_core/protocol/arm_atsam/led_matrix.c index 04d05af6db6..e29fb6587c9 100644 --- a/tmk_core/protocol/arm_atsam/led_matrix.c +++ b/tmk_core/protocol/arm_atsam/led_matrix.c @@ -17,9 +17,19 @@ along with this program. If not, see . #include "arm_atsam_protocol.h" #include "tmk_core/common/led.h" +#include "rgb_matrix.h" #include #include +#ifdef USE_MASSDROP_CONFIGURATOR +__attribute__((weak)) +led_instruction_t led_instructions[] = { { .end = 1 } }; +static void led_matrix_massdrop_config_override(int i); +#endif // USE_MASSDROP_CONFIGURATOR + +extern rgb_config_t rgb_matrix_config; +extern rgb_counters_t g_rgb_counters; + void SERCOM1_0_Handler( void ) { if (SERCOM1->I2CM.INTFLAG.bit.ERROR) @@ -51,14 +61,17 @@ void DMAC_0_Handler( void ) issi3733_driver_t issidrv[ISSI3733_DRIVER_COUNT]; -issi3733_led_t led_map[ISSI3733_LED_COUNT+1] = ISSI3733_LED_MAP; -issi3733_led_t *lede = led_map + ISSI3733_LED_COUNT; //End pointer of mapping +issi3733_led_t led_map[ISSI3733_LED_COUNT] = ISSI3733_LED_MAP; +RGB led_buffer[ISSI3733_LED_COUNT]; uint8_t gcr_desired; -uint8_t gcr_breathe; -uint8_t gcr_use; uint8_t gcr_actual; uint8_t gcr_actual_last; +#ifdef USE_MASSDROP_CONFIGURATOR +uint8_t gcr_breathe; +float breathe_mult; +float pomod; +#endif #define ACT_GCR_NONE 0 #define ACT_GCR_INC 1 @@ -73,11 +86,14 @@ static uint8_t v_5v_cat_hit; void gcr_compute(void) { uint8_t action = ACT_GCR_NONE; + uint8_t gcr_use = gcr_desired; +#ifdef USE_MASSDROP_CONFIGURATOR if (led_animation_breathing) + { gcr_use = gcr_breathe; - else - gcr_use = gcr_desired; + } +#endif //If the 5v takes a catastrophic hit, disable the LED drivers briefly, assert auto gcr mode, min gcr and let the auto take over if (v_5v < V5_CAT) @@ -151,6 +167,7 @@ void gcr_compute(void) gcr_actual -= LED_GCR_STEP_AUTO; gcr_min_counter = 0; +#ifdef USE_MASSDROP_CONFIGURATOR //If breathe mode is active, the top end can fluctuate if the host can not supply enough current //So set the breathe GCR to where it becomes stable if (led_animation_breathing == 1) @@ -160,12 +177,11 @@ void gcr_compute(void) // and the same would happen maybe one or two more times. Therefore I'm favoring // powering through one full breathe and letting gcr settle completely } +#endif } } } -led_disp_t disp; - void issi3733_prepare_arrays(void) { memset(issidrv,0,sizeof(issi3733_driver_t) * ISSI3733_DRIVER_COUNT); @@ -178,230 +194,294 @@ void issi3733_prepare_arrays(void) issidrv[i].addr = addrs[i]; } - issi3733_led_t *cur = led_map; - - while (cur < lede) + for (uint8_t i = 0; i < ISSI3733_LED_COUNT; i++) { //BYTE: 1 + (SW-1)*16 + (CS-1) - cur->rgb.g = issidrv[cur->adr.drv-1].pwm + 1 + ((cur->adr.swg-1)*16 + (cur->adr.cs-1)); - cur->rgb.r = issidrv[cur->adr.drv-1].pwm + 1 + ((cur->adr.swr-1)*16 + (cur->adr.cs-1)); - cur->rgb.b = issidrv[cur->adr.drv-1].pwm + 1 + ((cur->adr.swb-1)*16 + (cur->adr.cs-1)); + led_map[i].rgb.g = issidrv[led_map[i].adr.drv-1].pwm + 1 + ((led_map[i].adr.swg-1)*16 + (led_map[i].adr.cs-1)); + led_map[i].rgb.r = issidrv[led_map[i].adr.drv-1].pwm + 1 + ((led_map[i].adr.swr-1)*16 + (led_map[i].adr.cs-1)); + led_map[i].rgb.b = issidrv[led_map[i].adr.drv-1].pwm + 1 + ((led_map[i].adr.swb-1)*16 + (led_map[i].adr.cs-1)); //BYTE: 1 + (SW-1)*2 + (CS-1)/8 //BIT: (CS-1)%8 - *(issidrv[cur->adr.drv-1].onoff + 1 + (cur->adr.swg-1)*2+(cur->adr.cs-1)/8) |= (1<<((cur->adr.cs-1)%8)); - *(issidrv[cur->adr.drv-1].onoff + 1 + (cur->adr.swr-1)*2+(cur->adr.cs-1)/8) |= (1<<((cur->adr.cs-1)%8)); - *(issidrv[cur->adr.drv-1].onoff + 1 + (cur->adr.swb-1)*2+(cur->adr.cs-1)/8) |= (1<<((cur->adr.cs-1)%8)); - - cur++; - } -} - -void disp_calc_extents(void) -{ - issi3733_led_t *cur = led_map; - - disp.left = 1e10; - disp.right = -1e10; - disp.top = -1e10; - disp.bottom = 1e10; - - while (cur < lede) - { - if (cur->x < disp.left) disp.left = cur->x; - if (cur->x > disp.right) disp.right = cur->x; - if (cur->y < disp.bottom) disp.bottom = cur->y; - if (cur->y > disp.top) disp.top = cur->y; - - cur++; - } - - disp.width = disp.right - disp.left; - disp.height = disp.top - disp.bottom; - disp.max_distance = sqrtf(powf(disp.width, 2) + powf(disp.height, 2)); -} - -void disp_pixel_setup(void) -{ - issi3733_led_t *cur = led_map; - - while (cur < lede) - { - cur->px = (cur->x - disp.left) / disp.width * 100; - cur->py = (cur->y - disp.bottom) / disp.height * 100; - *cur->rgb.r = 0; - *cur->rgb.g = 0; - *cur->rgb.b = 0; - - cur++; + *(issidrv[led_map[i].adr.drv-1].onoff + 1 + (led_map[i].adr.swg-1)*2+(led_map[i].adr.cs-1)/8) |= (1<<((led_map[i].adr.cs-1)%8)); + *(issidrv[led_map[i].adr.drv-1].onoff + 1 + (led_map[i].adr.swr-1)*2+(led_map[i].adr.cs-1)/8) |= (1<<((led_map[i].adr.cs-1)%8)); + *(issidrv[led_map[i].adr.drv-1].onoff + 1 + (led_map[i].adr.swb-1)*2+(led_map[i].adr.cs-1)/8) |= (1<<((led_map[i].adr.cs-1)%8)); } } void led_matrix_prepare(void) { - disp_calc_extents(); - disp_pixel_setup(); + for (uint8_t i = 0; i < ISSI3733_LED_COUNT; i++) + { + *led_map[i].rgb.r = 0; + *led_map[i].rgb.g = 0; + *led_map[i].rgb.b = 0; + } } -uint8_t led_enabled; -float led_animation_speed; -uint8_t led_animation_direction; -uint8_t led_animation_orientation; -uint8_t led_animation_breathing; -uint8_t led_animation_breathe_cur; -uint8_t breathe_step; -uint8_t breathe_dir; -uint8_t led_animation_circular; -uint64_t led_next_run; - -uint8_t led_animation_id; -uint8_t led_lighting_mode; - -issi3733_led_t *led_cur; -uint8_t led_per_run = 15; -float breathe_mult; - -__attribute__ ((weak)) -void led_matrix_run(void) +void led_set_one(int i, uint8_t r, uint8_t g, uint8_t b) { - float ro; - float go; - float bo; + if (i < ISSI3733_LED_COUNT) + { +#ifdef USE_MASSDROP_CONFIGURATOR + led_matrix_massdrop_config_override(i); +#else + led_buffer[i].r = r; + led_buffer[i].g = g; + led_buffer[i].b = b; +#endif + } +} + +void led_set_all(uint8_t r, uint8_t g, uint8_t b) +{ + for (uint8_t i = 0; i < ISSI3733_LED_COUNT; i++) + { + led_set_one(i, r, g, b); + } +} + +void init(void) +{ + DBGC(DC_LED_MATRIX_INIT_BEGIN); + + issi3733_prepare_arrays(); + + led_matrix_prepare(); + + gcr_min_counter = 0; + v_5v_cat_hit = 0; + + DBGC(DC_LED_MATRIX_INIT_COMPLETE); +} + +void flush(void) +{ +#ifdef USE_MASSDROP_CONFIGURATOR + if (!led_enabled) { return; } //Prevent calculations and I2C traffic if LED drivers are not enabled +#else + if (!sr_exp_data.bit.SDB_N) { return; } //Prevent calculations and I2C traffic if LED drivers are not enabled +#endif + + // Wait for previous transfer to complete + while (i2c_led_q_running) {} + + // Copy buffer to live DMA region + for (uint8_t i = 0; i < ISSI3733_LED_COUNT; i++) + { + *led_map[i].rgb.r = led_buffer[i].r; + *led_map[i].rgb.g = led_buffer[i].g; + *led_map[i].rgb.b = led_buffer[i].b; + } + +#ifdef USE_MASSDROP_CONFIGURATOR + breathe_mult = 1; + + if (led_animation_breathing) + { + //+60us 119 LED + led_animation_breathe_cur += BREATHE_STEP * breathe_dir; + + if (led_animation_breathe_cur >= BREATHE_MAX_STEP) + breathe_dir = -1; + else if (led_animation_breathe_cur <= BREATHE_MIN_STEP) + breathe_dir = 1; + + //Brightness curve created for 256 steps, 0 - ~98% + breathe_mult = 0.000015 * led_animation_breathe_cur * led_animation_breathe_cur; + if (breathe_mult > 1) breathe_mult = 1; + else if (breathe_mult < 0) breathe_mult = 0; + } + + //This should only be performed once per frame + pomod = (float)((g_rgb_counters.tick / 10) % (uint32_t)(1000.0f / led_animation_speed)) / 10.0f * led_animation_speed; + pomod *= 100.0f; + pomod = (uint32_t)pomod % 10000; + pomod /= 100.0f; + +#endif // USE_MASSDROP_CONFIGURATOR + + uint8_t drvid; + + //NOTE: GCR does not need to be timed with LED processing, but there is really no harm + if (gcr_actual != gcr_actual_last) + { + for (drvid=0;drvidend != 1) { - led_cur = led_map; + po = pos; //Reset po for new frame - disp.frame += 1; - - breathe_mult = 1; - - if (led_animation_breathing) + //Add in any moving effects + if ((!led_animation_direction && f->ef & EF_SCR_R) || (led_animation_direction && (f->ef & EF_SCR_L))) { - led_animation_breathe_cur += breathe_step * breathe_dir; + po -= pomod; - if (led_animation_breathe_cur >= BREATHE_MAX_STEP) - breathe_dir = -1; - else if (led_animation_breathe_cur <= BREATHE_MIN_STEP) - breathe_dir = 1; - - //Brightness curve created for 256 steps, 0 - ~98% - breathe_mult = 0.000015 * led_animation_breathe_cur * led_animation_breathe_cur; - if (breathe_mult > 1) breathe_mult = 1; - else if (breathe_mult < 0) breathe_mult = 0; + if (po > 100) po -= 100; + else if (po < 0) po += 100; } - } - - uint8_t fcur = 0; - uint8_t fmax = 0; - - //Frames setup - while (f[fcur].end != 1) - { - fcur++; //Count frames - } - - fmax = fcur; //Store total frames count - - while (led_cur < lede && led_this_run < led_per_run) - { - ro = 0; - go = 0; - bo = 0; - - if (led_lighting_mode == LED_MODE_KEYS_ONLY && led_cur->scan == 255) + else if ((!led_animation_direction && f->ef & EF_SCR_L) || (led_animation_direction && (f->ef & EF_SCR_R))) { - //Do not act on this LED + po += pomod; + + if (po > 100) po -= 100; + else if (po < 0) po += 100; } - else if (led_lighting_mode == LED_MODE_NON_KEYS_ONLY && led_cur->scan != 255) + + //Check if LED's po is in current frame + if (po < f->hs) { f++; continue; } + if (po > f->he) { f++; continue; } + //note: < 0 or > 100 continue + + //Calculate the po within the start-stop percentage for color blending + po = (po - f->hs) / (f->he - f->hs); + + //Add in any color effects + if (f->ef & EF_OVER) { - //Do not act on this LED + *ro = (po * (f->re - f->rs)) + f->rs;// + 0.5; + *go = (po * (f->ge - f->gs)) + f->gs;// + 0.5; + *bo = (po * (f->be - f->bs)) + f->bs;// + 0.5; } - else if (led_lighting_mode == LED_MODE_INDICATORS_ONLY) + else if (f->ef & EF_SUBTRACT) { - //Do not act on this LED (Only show indicators) + *ro -= (po * (f->re - f->rs)) + f->rs;// + 0.5; + *go -= (po * (f->ge - f->gs)) + f->gs;// + 0.5; + *bo -= (po * (f->be - f->bs)) + f->bs;// + 0.5; } else { - //Act on LED - for (fcur = 0; fcur < fmax; fcur++) - { - - if (led_animation_circular) { - po = sqrtf((powf(fabsf((disp.width / 2) - (led_cur->x - disp.left)), 2) + powf(fabsf((disp.height / 2) - (led_cur->y - disp.bottom)), 2))) / disp.max_distance * 100; - } - else { - if (led_animation_orientation) - { - po = led_cur->py; - } - else - { - po = led_cur->px; - } - } - - float pomod; - pomod = (float)(disp.frame % (uint32_t)(1000.0f / led_animation_speed)) / 10.0f * led_animation_speed; - - //Add in any moving effects - if ((!led_animation_direction && f[fcur].ef & EF_SCR_R) || (led_animation_direction && (f[fcur].ef & EF_SCR_L))) - { - pomod *= 100.0f; - pomod = (uint32_t)pomod % 10000; - pomod /= 100.0f; - - po -= pomod; - - if (po > 100) po -= 100; - else if (po < 0) po += 100; - } - else if ((!led_animation_direction && f[fcur].ef & EF_SCR_L) || (led_animation_direction && (f[fcur].ef & EF_SCR_R))) - { - pomod *= 100.0f; - pomod = (uint32_t)pomod % 10000; - pomod /= 100.0f; - po += pomod; - - if (po > 100) po -= 100; - else if (po < 0) po += 100; - } - - //Check if LED's po is in current frame - if (po < f[fcur].hs) continue; - if (po > f[fcur].he) continue; - //note: < 0 or > 100 continue - - //Calculate the po within the start-stop percentage for color blending - po = (po - f[fcur].hs) / (f[fcur].he - f[fcur].hs); - - //Add in any color effects - if (f[fcur].ef & EF_OVER) - { - ro = (po * (f[fcur].re - f[fcur].rs)) + f[fcur].rs;// + 0.5; - go = (po * (f[fcur].ge - f[fcur].gs)) + f[fcur].gs;// + 0.5; - bo = (po * (f[fcur].be - f[fcur].bs)) + f[fcur].bs;// + 0.5; - } - else if (f[fcur].ef & EF_SUBTRACT) - { - ro -= (po * (f[fcur].re - f[fcur].rs)) + f[fcur].rs;// + 0.5; - go -= (po * (f[fcur].ge - f[fcur].gs)) + f[fcur].gs;// + 0.5; - bo -= (po * (f[fcur].be - f[fcur].bs)) + f[fcur].bs;// + 0.5; - } - else - { - ro += (po * (f[fcur].re - f[fcur].rs)) + f[fcur].rs;// + 0.5; - go += (po * (f[fcur].ge - f[fcur].gs)) + f[fcur].gs;// + 0.5; - bo += (po * (f[fcur].be - f[fcur].bs)) + f[fcur].bs;// + 0.5; - } - } + *ro += (po * (f->re - f->rs)) + f->rs;// + 0.5; + *go += (po * (f->ge - f->gs)) + f->gs;// + 0.5; + *bo += (po * (f->be - f->bs)) + f->bs;// + 0.5; + } + + f++; + } +} + +static void led_matrix_massdrop_config_override(int i) +{ + float ro = 0; + float go = 0; + float bo = 0; + + float po = (led_animation_orientation) + ? (float)g_rgb_leds[i].point.y / 64.f * 100 + : (float)g_rgb_leds[i].point.x / 224.f * 100; + + uint8_t highest_active_layer = biton32(layer_state); + + if (led_lighting_mode == LED_MODE_KEYS_ONLY && g_rgb_leds[i].matrix_co.raw == 0xff) { + //Do not act on this LED + } else if (led_lighting_mode == LED_MODE_NON_KEYS_ONLY && g_rgb_leds[i].matrix_co.raw != 0xff) { + //Do not act on this LED + } else if (led_lighting_mode == LED_MODE_INDICATORS_ONLY) { + //Do not act on this LED (Only show indicators) + } else { + led_instruction_t* led_cur_instruction = led_instructions; + while (!led_cur_instruction->end) { + // Check if this applies to current layer + if ((led_cur_instruction->flags & LED_FLAG_MATCH_LAYER) && + (led_cur_instruction->layer != highest_active_layer)) { + goto next_iter; + } + + // Check if this applies to current index + if (led_cur_instruction->flags & LED_FLAG_MATCH_ID) { + uint8_t modid = i / 32; //Calculate which id# contains the led bit + uint32_t modidbit = 1 << (i % 32); //Calculate the bit within the id# + uint32_t *bitfield = &led_cur_instruction->id0 + modid; //Add modid as offset to id0 address. *bitfield is now idX of the led id + if (~(*bitfield) & modidbit) { //Check if led bit is not set in idX + goto next_iter; + } + } + + if (led_cur_instruction->flags & LED_FLAG_USE_RGB) { + ro = led_cur_instruction->r; + go = led_cur_instruction->g; + bo = led_cur_instruction->b; + } else if (led_cur_instruction->flags & LED_FLAG_USE_PATTERN) { + led_run_pattern(led_setups[led_cur_instruction->pattern_id], &ro, &go, &bo, po); + } else if (led_cur_instruction->flags & LED_FLAG_USE_ROTATE_PATTERN) { + led_run_pattern(led_setups[led_animation_id], &ro, &go, &bo, po); + } + + next_iter: + led_cur_instruction++; } - //Clamp values 0-255 if (ro > 255) ro = 255; else if (ro < 0) ro = 0; if (go > 255) go = 255; else if (go < 0) go = 0; if (bo > 255) bo = 255; else if (bo < 0) bo = 0; @@ -412,127 +492,11 @@ void led_matrix_run(void) go *= breathe_mult; bo *= breathe_mult; } - - *led_cur->rgb.r = (uint8_t)ro; - *led_cur->rgb.g = (uint8_t)go; - *led_cur->rgb.b = (uint8_t)bo; - -#ifdef USB_LED_INDICATOR_ENABLE - if (keyboard_leds()) - { - uint8_t kbled = keyboard_leds(); - if ( - #if USB_LED_NUM_LOCK_SCANCODE != 255 - (led_cur->scan == USB_LED_NUM_LOCK_SCANCODE && kbled & (1<scan == USB_LED_CAPS_LOCK_SCANCODE && kbled & (1<scan == USB_LED_SCROLL_LOCK_SCANCODE && kbled & (1<scan == USB_LED_COMPOSE_SCANCODE && kbled & (1<scan == USB_LED_KANA_SCANCODE && kbled & (1<rgb.r > 127) *led_cur->rgb.r = 0; - else *led_cur->rgb.r = 255; - if (*led_cur->rgb.g > 127) *led_cur->rgb.g = 0; - else *led_cur->rgb.g = 255; - if (*led_cur->rgb.b > 127) *led_cur->rgb.b = 0; - else *led_cur->rgb.b = 255; - } - } -#endif //USB_LED_INDICATOR_ENABLE - - led_cur++; - led_this_run++; - } -} - -uint8_t led_matrix_init(void) -{ - DBGC(DC_LED_MATRIX_INIT_BEGIN); - - issi3733_prepare_arrays(); - - led_matrix_prepare(); - - disp.frame = 0; - led_next_run = 0; - - led_enabled = 1; - led_animation_id = 0; - led_lighting_mode = LED_MODE_NORMAL; - led_animation_speed = 4.0f; - led_animation_direction = 0; - led_animation_orientation = 0; - led_animation_breathing = 0; - led_animation_breathe_cur = BREATHE_MIN_STEP; - breathe_step = 1; - breathe_dir = 1; - led_animation_circular = 0; - - gcr_min_counter = 0; - v_5v_cat_hit = 0; - - //Run led matrix code once for initial LED coloring - led_cur = 0; - rgb_matrix_init_user(); - led_matrix_run(); - - DBGC(DC_LED_MATRIX_INIT_COMPLETE); - - return 0; -} - -__attribute__ ((weak)) -void rgb_matrix_init_user(void) { - -} - -#define LED_UPDATE_RATE 10 //ms - -//led data processing can take time, so process data in chunks to free up the processor -//this is done through led_cur and lede -void led_matrix_task(void) -{ - if (led_enabled) - { - //If an update may run and frame processing has completed - if (timer_read64() >= led_next_run && led_cur == lede) - { - uint8_t drvid; - - led_next_run = timer_read64() + LED_UPDATE_RATE; //Set next frame update time - - //NOTE: GCR does not need to be timed with LED processing, but there is really no harm - if (gcr_actual != gcr_actual_last) - { - for (drvid=0;drvid. #ifndef _LED_MATRIX_H_ #define _LED_MATRIX_H_ +#include "quantum.h" + //From keyboard #include "config_led.h" @@ -75,25 +77,20 @@ typedef struct issi3733_led_s { uint8_t scan; //Key scan code from wiring (set 0xFF if no key) } issi3733_led_t; -typedef struct led_disp_s { - uint64_t frame; - float left; - float right; - float top; - float bottom; - float width; - float height; - float max_distance; -} led_disp_t; +extern issi3733_driver_t issidrv[ISSI3733_DRIVER_COUNT]; -uint8_t led_matrix_init(void); -void rgb_matrix_init_user(void); +extern uint8_t gcr_desired; +extern uint8_t gcr_breathe; +extern uint8_t gcr_actual; +extern uint8_t gcr_actual_last; -#define LED_MODE_NORMAL 0 //Must be 0 -#define LED_MODE_KEYS_ONLY 1 -#define LED_MODE_NON_KEYS_ONLY 2 -#define LED_MODE_INDICATORS_ONLY 3 -#define LED_MODE_MAX_INDEX LED_MODE_INDICATORS_ONLY //Must be highest value +void gcr_compute(void); + +void led_matrix_indicators(void); + +/*------------------------- Legacy Lighting Support ------------------------*/ + +#ifdef USE_MASSDROP_CONFIGURATOR #define EF_NONE 0x00000000 //No effect #define EF_OVER 0x00000001 //Overwrite any previous color information with new @@ -114,33 +111,48 @@ typedef struct led_setup_s { uint8_t end; //Set to signal end of the setup } led_setup_t; -extern issi3733_driver_t issidrv[ISSI3733_DRIVER_COUNT]; - -extern uint8_t gcr_desired; -extern uint8_t gcr_breathe; -extern uint8_t gcr_actual; -extern uint8_t gcr_actual_last; - -extern uint8_t led_animation_id; -extern uint8_t led_enabled; -extern float led_animation_speed; -extern uint8_t led_lighting_mode; -extern uint8_t led_animation_direction; -extern uint8_t led_animation_orientation; -extern uint8_t led_animation_breathing; -extern uint8_t led_animation_breathe_cur; -extern uint8_t breathe_dir; -extern uint8_t led_animation_circular; extern const uint8_t led_setups_count; - extern void *led_setups[]; -extern issi3733_led_t *led_cur; -extern issi3733_led_t *lede; +//LED Extra Instructions +#define LED_FLAG_NULL 0x00 //Matching and coloring not used (default) +#define LED_FLAG_MATCH_ID 0x01 //Match on the ID of the LED (set id#'s to desired bit pattern, first LED is id 1) +#define LED_FLAG_MATCH_LAYER 0x02 //Match on the current active layer (set layer to desired match layer) +#define LED_FLAG_USE_RGB 0x10 //Use a specific RGB value (set r, g, b to desired output color values) +#define LED_FLAG_USE_PATTERN 0x20 //Use a specific pattern ID (set pattern_id to desired output pattern) +#define LED_FLAG_USE_ROTATE_PATTERN 0x40 //Use pattern the user has cycled to manually -void led_matrix_run(void); -void led_matrix_task(void); +typedef struct led_instruction_s { + uint16_t flags; // Bitfield for LED instructions + uint32_t id0; // Bitwise id, IDs 0-31 + uint32_t id1; // Bitwise id, IDs 32-63 + uint32_t id2; // Bitwise id, IDs 64-95 + uint32_t id3; // Bitwise id, IDs 96-127 + uint8_t layer; + uint8_t r; + uint8_t g; + uint8_t b; + uint8_t pattern_id; + uint8_t end; +} led_instruction_t; -void gcr_compute(void); +extern led_instruction_t led_instructions[]; + +extern uint8_t led_animation_breathing; +extern uint8_t led_animation_id; +extern float led_animation_speed; +extern uint8_t led_lighting_mode; +extern uint8_t led_enabled; +extern uint8_t led_animation_breathe_cur; +extern uint8_t led_animation_direction; +extern uint8_t breathe_dir; + +#define LED_MODE_NORMAL 0 //Must be 0 +#define LED_MODE_KEYS_ONLY 1 +#define LED_MODE_NON_KEYS_ONLY 2 +#define LED_MODE_INDICATORS_ONLY 3 +#define LED_MODE_MAX_INDEX LED_MODE_INDICATORS_ONLY //Must be highest value + +#endif // USE_MASSDROP_CONFIGURATOR #endif //_LED_MATRIX_H_ diff --git a/keyboards/massdrop/alt/led_programs.c b/tmk_core/protocol/arm_atsam/led_matrix_programs.c similarity index 99% rename from keyboards/massdrop/alt/led_programs.c rename to tmk_core/protocol/arm_atsam/led_matrix_programs.c index b3b7a7e90e7..cf7478dc312 100644 --- a/keyboards/massdrop/alt/led_programs.c +++ b/tmk_core/protocol/arm_atsam/led_matrix_programs.c @@ -15,7 +15,8 @@ You should have received a copy of the GNU General Public License along with this program. If not, see . */ -#include "alt.h" +#ifdef USE_MASSDROP_CONFIGURATOR + #include "led_matrix.h" //Teal <-> Salmon @@ -118,3 +119,5 @@ void *led_setups[] = { }; const uint8_t led_setups_count = sizeof(led_setups) / sizeof(led_setups[0]); + +#endif diff --git a/tmk_core/protocol/arm_atsam/main_arm_atsam.c b/tmk_core/protocol/arm_atsam/main_arm_atsam.c index eaad66e9fc8..0974a230d4c 100644 --- a/tmk_core/protocol/arm_atsam/main_arm_atsam.c +++ b/tmk_core/protocol/arm_atsam/main_arm_atsam.c @@ -203,13 +203,6 @@ void main_subtask_usb_state(void) } } -void main_subtask_led(void) -{ - if (g_usb_state != USB_FSMSTATUS_FSMSTATE_ON_Val) return; //Only run LED tasks if USB is operating - - led_matrix_task(); -} - void main_subtask_power_check(void) { static uint64_t next_5v_checkup = 0; @@ -221,7 +214,9 @@ void main_subtask_power_check(void) v_5v = adc_get(ADC_5V); v_5v_avg = 0.9 * v_5v_avg + 0.1 * v_5v; +#ifdef RGB_MATRIX_ENABLE gcr_compute(); +#endif } } @@ -240,7 +235,6 @@ void main_subtask_usb_extra_device(void) void main_subtasks(void) { main_subtask_usb_state(); - main_subtask_led(); main_subtask_power_check(); main_subtask_usb_extra_device(); } @@ -263,7 +257,9 @@ int main(void) SR_EXP_Init(); +#ifdef RGB_MATRIX_ENABLE i2c1_init(); +#endif // RGB_MATRIX_ENABLE matrix_init(); @@ -281,8 +277,7 @@ int main(void) DBG_LED_OFF; - led_matrix_init(); - +#ifdef RGB_MATRIX_ENABLE while (I2C3733_Init_Control() != 1) {} while (I2C3733_Init_Drivers() != 1) {} @@ -292,6 +287,7 @@ int main(void) for (uint8_t drvid = 0; drvid < ISSI3733_DRIVER_COUNT; drvid++) I2C_LED_Q_ONOFF(drvid); //Queue data +#endif // RGB_MATRIX_ENABLE keyboard_setup(); diff --git a/tmk_core/protocol/arm_atsam/usb/usb2422.c b/tmk_core/protocol/arm_atsam/usb/usb2422.c index d6e19224291..76ec3aaaa76 100644 --- a/tmk_core/protocol/arm_atsam/usb/usb2422.c +++ b/tmk_core/protocol/arm_atsam/usb/usb2422.c @@ -365,8 +365,10 @@ void USB_ExtraSetState(uint8_t state) if (usb_extra_state == USB_EXTRA_STATE_ENABLED) CDC_print("USB: Extra enabled\r\n"); else if (usb_extra_state == USB_EXTRA_STATE_DISABLED) { - CDC_print("USB: Extra disabled\r\n"); - if (led_animation_breathing) gcr_breathe = gcr_desired; + CDC_print("USB: Extra disabled\r\n"); +#ifdef USE_MASSDROP_CONFIGURATOR + if (led_animation_breathing) gcr_breathe = gcr_desired; +#endif } else if (usb_extra_state == USB_EXTRA_STATE_DISABLED_UNTIL_REPLUG) CDC_print("USB: Extra disabled until replug\r\n"); else CDC_print("USB: Extra state unknown\r\n"); From b463415d84867b34f35de2277d419676a602ddb0 Mon Sep 17 00:00:00 2001 From: MechMerlin <30334081+mechmerlin@users.noreply.github.com> Date: Wed, 3 Apr 2019 18:35:53 -0700 Subject: [PATCH 022/171] [Keyboard] V60 Type R - Turn on leds for Configurator + Refactor (#5546) * use pragma once where applicable * remove ? * update default keymap readme * remove un need include * update readme with newbs guide * set underglow and backlight to be on by default, and explicitly set them to no for the default keymap to handle the non Polestar case. * put mine and benlyall's name in the code * update readme --- keyboards/v60_type_r/config.h | 7 ++--- keyboards/v60_type_r/keymaps/default/config.h | 2 +- keyboards/v60_type_r/keymaps/default/keymap.c | 2 +- .../v60_type_r/keymaps/default/readme.md | 5 ++-- keyboards/v60_type_r/keymaps/default/rules.mk | 2 ++ keyboards/v60_type_r/keymaps/vimouse/config.h | 9 ++---- keyboards/v60_type_r/keymaps/vimouse/keymap.c | 2 +- keyboards/v60_type_r/readme.md | 16 +---------- keyboards/v60_type_r/rules.mk | 28 +++++++++---------- keyboards/v60_type_r/v60_type_r.c | 2 +- keyboards/v60_type_r/v60_type_r.h | 6 ++-- 11 files changed, 29 insertions(+), 52 deletions(-) create mode 100644 keyboards/v60_type_r/keymaps/default/rules.mk diff --git a/keyboards/v60_type_r/config.h b/keyboards/v60_type_r/config.h index 703745d5642..e3e00a9f80d 100644 --- a/keyboards/v60_type_r/config.h +++ b/keyboards/v60_type_r/config.h @@ -1,5 +1,5 @@ /* -Copyright 2017 REPLACE_WITH_YOUR_NAME +Copyright 2017 benlyall, MechMerlin This program is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by @@ -15,8 +15,7 @@ You should have received a copy of the GNU General Public License along with this program. If not, see . */ -#ifndef CONFIG_H -#define CONFIG_H +#pragma once #include "config_common.h" @@ -190,5 +189,3 @@ along with this program. If not, see . /* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */ //#define MIDI_TONE_KEYCODE_OCTAVES 1 - -#endif diff --git a/keyboards/v60_type_r/keymaps/default/config.h b/keyboards/v60_type_r/keymaps/default/config.h index 6f235f6ba84..744bea207b3 100644 --- a/keyboards/v60_type_r/keymaps/default/config.h +++ b/keyboards/v60_type_r/keymaps/default/config.h @@ -1,4 +1,4 @@ -/* Copyright 2017 REPLACE_WITH_YOUR_NAME +/* Copyright 2017 benlyall, MechMerlin * * This program is free software: you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by diff --git a/keyboards/v60_type_r/keymaps/default/keymap.c b/keyboards/v60_type_r/keymaps/default/keymap.c index 77546c0a654..831def0789b 100644 --- a/keyboards/v60_type_r/keymaps/default/keymap.c +++ b/keyboards/v60_type_r/keymaps/default/keymap.c @@ -1,4 +1,4 @@ -/* Copyright 2017 REPLACE_WITH_YOUR_NAME +/* Copyright 2017 benlyall, MechMerlin * * This program is free software: you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by diff --git a/keyboards/v60_type_r/keymaps/default/readme.md b/keyboards/v60_type_r/keymaps/default/readme.md index 57ac901ada0..9b3c6f06433 100644 --- a/keyboards/v60_type_r/keymaps/default/readme.md +++ b/keyboards/v60_type_r/keymaps/default/readme.md @@ -1,5 +1,4 @@ -KB Paradise V60 Type R Default Layout -====================== +# KB Paradise V60 Type R Default Layout This is the default layout as defined by the KBP V60 Type R manual/keycaps @@ -9,4 +8,4 @@ This is the default layout as defined by the KBP V60 Type R manual/keycaps ### Build -To build this keymap, simply run `make KEYMAP=default`. \ No newline at end of file +To build this keymap, simply run `make v60_type_r:default`. diff --git a/keyboards/v60_type_r/keymaps/default/rules.mk b/keyboards/v60_type_r/keymaps/default/rules.mk new file mode 100644 index 00000000000..b6c9a258059 --- /dev/null +++ b/keyboards/v60_type_r/keymaps/default/rules.mk @@ -0,0 +1,2 @@ +BACKLIGHT_ENABLE = no +RGBLIGHT_ENABLE = no diff --git a/keyboards/v60_type_r/keymaps/vimouse/config.h b/keyboards/v60_type_r/keymaps/vimouse/config.h index 3937420d00d..285cb4fa238 100644 --- a/keyboards/v60_type_r/keymaps/vimouse/config.h +++ b/keyboards/v60_type_r/keymaps/vimouse/config.h @@ -1,4 +1,4 @@ -/* Copyright 2017 REPLACE_WITH_YOUR_NAME +/* Copyright 2017 benlyall, MechMerlin * * This program is free software: you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -14,10 +14,7 @@ * along with this program. If not, see . */ -#ifndef CONFIG_USER_H -#define CONFIG_USER_H - -#include "../../config.h" +#pragma once #define V60_POLESTAR @@ -27,5 +24,3 @@ #define MOUSEKEY_TIME_TO_MAX 60 #define MOUSEKEY_MAX_SPEED 7 #define MOUSEKEY_WHEEL_DELAY 0 - -#endif diff --git a/keyboards/v60_type_r/keymaps/vimouse/keymap.c b/keyboards/v60_type_r/keymaps/vimouse/keymap.c index 2586683127f..8b0019e7ba1 100644 --- a/keyboards/v60_type_r/keymaps/vimouse/keymap.c +++ b/keyboards/v60_type_r/keymaps/vimouse/keymap.c @@ -1,4 +1,4 @@ -/* Copyright 2017 REPLACE_WITH_YOUR_NAME +/* Copyright 2017 benlyall, MechMerlin * * This program is free software: you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by diff --git a/keyboards/v60_type_r/readme.md b/keyboards/v60_type_r/readme.md index 06ff749b866..76cb5f39fc4 100644 --- a/keyboards/v60_type_r/readme.md +++ b/keyboards/v60_type_r/readme.md @@ -13,17 +13,6 @@ Please note that other variants of the KBP V60 are not fully programmable. Backlight and RGB Underglow are both supported. -To use the backlight and/or RGB underglow: -* Create a new keymap -* Create a rules.mk file in the keymap -* Add RGBLIGHT_ENABLE = yes and/or BACKLIGHT_ENABLE = yes to the rules.mk -* Setup your keymap to your preference. Use [the `vimouse` keymap](keymaps/vimouse/keymap.c) as a starting point -* Some extra keys are defined to allow you to set the red, green and blue values of the underglow directly, rather than using the HSV spectrum. These are RGB_RI, RGB_RD, RGB_GI, RGB_GD, RGB_BI, RGB_BD for increase and decrease of the red, green and blue channels respectively. - -The provided `default` keymap pretty closely matches the default V60 Type R keymap, minus the backlight and underglow control keys. The `vimouse` keymap is completely customised and makes use of many of the possibilities, including mouse keys, backlighting, RGB underglow, etc. - -Note for those customising: The configuration used in the `vimouse` keymap results in about 93% of the available flash being utilised. Keep that in mind if you're adding functionality. - Note: By default the V60 Type R uses TMK. You should know what you're doing and none of this is guaranteed to work. If you want to stick with the TMK default, then the KB Paradise preferred way of creating the hex file is by using https://tkg.io/, selecting Fantastic60 and then defining your keymap. You will then have to use tkg-toolkit to finish the flashing @@ -40,7 +29,4 @@ or make v60_type_r:vimouse -See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) then the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. - - - +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/v60_type_r/rules.mk b/keyboards/v60_type_r/rules.mk index 7a1340a1aca..54a20a78154 100644 --- a/keyboards/v60_type_r/rules.mk +++ b/keyboards/v60_type_r/rules.mk @@ -52,21 +52,21 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE ?= no # Virtual DIP switch configuration(+1000) -MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700) -EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450) -CONSOLE_ENABLE ?= yes # Console for debug(+400) -COMMAND_ENABLE ?= yes # Commands for debug and configuration +BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = yes # Mouse keys(+4700) +EXTRAKEY_ENABLE = yes # Audio control and System control(+450) +CONSOLE_ENABLE = yes # Console for debug(+400) +COMMAND_ENABLE = yes # Commands for debug and configuration # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE -SLEEP_LED_ENABLE ?= no # Breathing sleep LED during USB suspend +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work -NKRO_ENABLE ?= no # USB Nkey Rollover -BACKLIGHT_ENABLE ?= no # Enable keyboard backlight functionality on B7 by default -RGBLIGHT_ENABLE ?= no # Enable the RGB Underglow -MIDI_ENABLE ?= no # MIDI support (+2400 to 4200, depending on config) -UNICODE_ENABLE ?= no # Unicode -BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID -AUDIO_ENABLE ?= no # Audio output on port C6 -FAUXCLICKY_ENABLE ?= no # Use buzzer to emulate clicky switches +NKRO_ENABLE = no # USB Nkey Rollover +BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality on B7 by default +RGBLIGHT_ENABLE = yes # Enable the RGB Underglow +MIDI_ENABLE = no # MIDI support (+2400 to 4200, depending on config) +UNICODE_ENABLE = no # Unicode +BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID +AUDIO_ENABLE = no # Audio output on port C6 +FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches LAYOUTS = 60_ansi diff --git a/keyboards/v60_type_r/v60_type_r.c b/keyboards/v60_type_r/v60_type_r.c index 86d87e12da2..41eb75807d0 100644 --- a/keyboards/v60_type_r/v60_type_r.c +++ b/keyboards/v60_type_r/v60_type_r.c @@ -1,4 +1,4 @@ -/* Copyright 2017 REPLACE_WITH_YOUR_NAME +/* Copyright 2017 benlyall, MechMerlin * * This program is free software: you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by diff --git a/keyboards/v60_type_r/v60_type_r.h b/keyboards/v60_type_r/v60_type_r.h index 3d7aef7eaf0..25097ed48e8 100644 --- a/keyboards/v60_type_r/v60_type_r.h +++ b/keyboards/v60_type_r/v60_type_r.h @@ -1,4 +1,4 @@ -/* Copyright 2017 REPLACE_WITH_YOUR_NAME +/* Copyright 2017 benlyall, MechMerlin * * This program is free software: you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -13,8 +13,7 @@ * You should have received a copy of the GNU General Public License * along with this program. If not, see . */ -#ifndef V60_TYPE_R_H -#define V60_TYPE_R_H +#pragma once #include "quantum.h" @@ -106,4 +105,3 @@ enum my_keycodes { { k40, k41, k42, k43, k44, k45, k46, k47 } \ } -#endif From 4f4fad83737546db6dd04af9e26320ef7d0610dd Mon Sep 17 00:00:00 2001 From: Nicholas Shaff Date: Thu, 4 Apr 2019 00:54:30 -0500 Subject: [PATCH 023/171] [Keyboard] Doro67 Multi PCB port (#5539) * Initial portover of the doro68.json with corrected column pins. * Initial setup of LAYOUT_ansi and it's use in the default keymap. * Added F keys to default kemap on layer 1. * Added split space (and everything else) layout and a base keymap to be updated. * Renamed split_space to multi. * Changed product_id for doro. * Created a basic doro LAYOUT_iso and default keymap. * Copied over basic layout and keymap. * Added readme.md for doro67 multi. * Removed basic keyboad layout and keymap because it's a separate PCB. * Added backlight controls to the various keymaps. * Added explicit backlight pin define. * Increased number of backlight levels for flexibility. * Removed unnecessary line slashes and unified keymcaps. * Corrected ISO layout and switched position with multi. * Added keymap readme.md files. * Corrected ISO keymap. * Added Layouts to info.json for toolbox. * Re-added slashes as they were necessary here... * Corrected info.json/keymap discreptancies. * Updated copyright messages (and fixed small readme error). * Added missing line break spaces in readme.md Co-Authored-By: ShadeDream * Keymap alignments on default_multi readme.md Co-Authored-By: ShadeDream * Keymap alignments on default_multi readme.md Co-Authored-By: ShadeDream * Keymap alignments on default_multi readme.md Co-Authored-By: ShadeDream * Small alignment adjustment on the default keymap readme.md Co-Authored-By: ShadeDream --- keyboards/doro67/multi/config.h | 33 +++++++++++ keyboards/doro67/multi/info.json | 18 ++++++ .../doro67/multi/keymaps/default/keymap.c | 36 +++++++++++ .../doro67/multi/keymaps/default/readme.md | 36 +++++++++++ .../doro67/multi/keymaps/default_iso/keymap.c | 36 +++++++++++ .../multi/keymaps/default_iso/readme.md | 36 +++++++++++ .../multi/keymaps/default_multi/keymap.c | 36 +++++++++++ .../multi/keymaps/default_multi/readme.md | 39 ++++++++++++ keyboards/doro67/multi/multi.c | 43 ++++++++++++++ keyboards/doro67/multi/multi.h | 59 +++++++++++++++++++ keyboards/doro67/multi/readme.md | 16 +++++ keyboards/doro67/multi/rules.mk | 47 +++++++++++++++ 12 files changed, 435 insertions(+) create mode 100644 keyboards/doro67/multi/config.h create mode 100644 keyboards/doro67/multi/info.json create mode 100644 keyboards/doro67/multi/keymaps/default/keymap.c create mode 100644 keyboards/doro67/multi/keymaps/default/readme.md create mode 100644 keyboards/doro67/multi/keymaps/default_iso/keymap.c create mode 100644 keyboards/doro67/multi/keymaps/default_iso/readme.md create mode 100644 keyboards/doro67/multi/keymaps/default_multi/keymap.c create mode 100644 keyboards/doro67/multi/keymaps/default_multi/readme.md create mode 100644 keyboards/doro67/multi/multi.c create mode 100644 keyboards/doro67/multi/multi.h create mode 100644 keyboards/doro67/multi/readme.md create mode 100644 keyboards/doro67/multi/rules.mk diff --git a/keyboards/doro67/multi/config.h b/keyboards/doro67/multi/config.h new file mode 100644 index 00000000000..4a15063cc26 --- /dev/null +++ b/keyboards/doro67/multi/config.h @@ -0,0 +1,33 @@ +#pragma once + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0xFEED +#define PRODUCT_ID 0xD070 +#define DEVICE_VER 0x0001 +#define MANUFACTURER Backprop Studio +#define PRODUCT Doro67 Multi PCB +#define DESCRIPTION 65% custom keyboard + +/* key matrix size */ +#define MATRIX_ROWS 5 +#define MATRIX_COLS 15 + +/* + * Keyboard Matrix Assignments + * + * Change this to how you wired your keyboard + * COLS: AVR pins used for columns, left to right + * ROWS: AVR pins used for rows, top to bottom + * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) + * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) + * +*/ +#define MATRIX_ROW_PINS { D0, D1, D2, D3, D5 } +#define MATRIX_COL_PINS { B0, B1, B2, B3, D4, D6, D7, B4, B5, B6, C6, C7, F5, F6, F7 } + +#define DIODE_DIRECTION COL2ROW + +#define BACKLIGHT_PIN B7 +#define BACKLIGHT_LEVELS 7 diff --git a/keyboards/doro67/multi/info.json b/keyboards/doro67/multi/info.json new file mode 100644 index 00000000000..03252140dd5 --- /dev/null +++ b/keyboards/doro67/multi/info.json @@ -0,0 +1,18 @@ +{ + "keyboard_name": "Doro67 Multi PCB", + "url": "", + "maintainer": "qmk", + "width": 16, + "height": 5, + "layouts": { + "LAYOUT_ansi": { + "layout": [{"label":"Esc", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"@", "x":2, "y":0}, {"label":"#", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"label":"Backspace", "x":13, "y":0, "w":2}, {"label":"Ins", "x":15, "y":0}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, {"label":"|", "x":13.5, "y":1, "w":1.5}, {"label":"Del", "x":15, "y":1}, {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"\"", "x":11.75, "y":2}, {"label":"Enter", "x":12.75, "y":2, "w":2.25}, {"label":"PgUp", "x":15, "y":2}, {"label":"Shift", "x":0, "y":3, "w":2.25}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":"<", "x":9.25, "y":3}, {"label":">", "x":10.25, "y":3}, {"label":"?", "x":11.25, "y":3}, {"label":"Shift", "x":12.25, "y":3, "w":1.75}, {"label":"Up", "x":14, "y":3}, {"label":"PgDn", "x":15, "y":3}, {"label":"Ctrl", "x":0, "y":4, "w":1.25}, {"label":"Win", "x":1.25, "y":4, "w":1.25}, {"label":"Alt", "x":2.5, "y":4, "w":1.25}, {"x":3.75, "y":4, "w":6.25}, {"label":"Alt", "x":10, "y":4, "w":1.25}, {"label":"MO(1)", "x":11.25, "y":4, "w":1.25}, {"label":"Left", "x":13, "y":4}, {"label":"Down", "x":14, "y":4}, {"label":"Right", "x":15, "y":4}] + }, + "LAYOUT_iso": { + "layout": [{"label":"Esc", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"\"", "x":2, "y":0}, {"label":"\u00a3", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"label":"Backspace", "x":13, "y":0, "w":2}, {"label":"Ins", "x":15, "y":0}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, {"label":"Enter", "x":13.75, "y":1, "w":1.25, "h":2}, {"label":"Del", "x":15, "y":1}, {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"@", "x":11.75, "y":2}, {"label":"~", "x":12.75, "y":2}, {"label":"PgUp", "x":15, "y":2}, {"label":"Shift", "x":0, "y":3, "w":1.25}, {"label":"|", "x":1.25, "y":3}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":"<", "x":9.25, "y":3}, {"label":">", "x":10.25, "y":3}, {"label":"?", "x":11.25, "y":3}, {"label":"Shift", "x":12.25, "y":3, "w":1.75}, {"label":"Up", "x":14, "y":3}, {"label":"PgDn", "x":15, "y":3}, {"label":"Ctrl", "x":0, "y":4, "w":1.25}, {"label":"Win", "x":1.25, "y":4, "w":1.25}, {"label":"Alt", "x":2.5, "y":4, "w":1.25}, {"x":3.75, "y":4, "w":6.25}, {"label":"Alt", "x":10, "y":4, "w":1.25}, {"label":"MO(1)", "x":11.25, "y":4, "w":1.25}, {"label":"Left", "x":13, "y":4}, {"label":"Down", "x":14, "y":4}, {"label":"Right", "x":15, "y":4}] + }, + "LAYOUT_multi": { + "layout": [{"label":"Esc", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"@", "x":2, "y":0}, {"label":"#", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"label":"Back", "x":13, "y":0}, {"label":"F2", "x":14, "y":0}, {"label":"Ins", "x":15, "y":0}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, {"label":"|", "x":13.5, "y":1, "w":1.5}, {"label":"Del", "x":15, "y":1}, {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"\"", "x":11.75, "y":2}, {"label":"Enter", "x":12.75, "y":2, "w":2.25}, {"label":"PgUp", "x":15, "y":2}, {"label":"Shift", "x":0, "y":3, "w":1.25}, {"label":"F1", "x":1.25, "y":3}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":"<", "x":9.25, "y":3}, {"label":">", "x":10.25, "y":3}, {"label":"?", "x":11.25, "y":3}, {"label":"Shift", "x":12.25, "y":3, "w":1.75}, {"label":"Up", "x":14, "y":3}, {"label":"PgDn", "x":15, "y":3}, {"label":"Ctrl", "x":0, "y":4, "w":1.25}, {"label":"Win", "x":1.25, "y":4, "w":1.25}, {"label":"Alt", "x":2.5, "y":4, "w":1.25}, {"x":3.75, "y":4, "w":2.75}, {"x":6.5, "y":4, "w":1.25}, {"x":7.75, "y":4, "w":2.25}, {"label":"Alt", "x":10, "y":4}, {"label":"MO(1)", "x":11, "y":4}, {"label":"Ctrl", "x":12, "y":4}, {"label":"Left", "x":13, "y":4}, {"label":"Down", "x":14, "y":4}, {"label":"Right", "x":15, "y":4}] + } + } +} diff --git a/keyboards/doro67/multi/keymaps/default/keymap.c b/keyboards/doro67/multi/keymaps/default/keymap.c new file mode 100644 index 00000000000..dd40a6c3faa --- /dev/null +++ b/keyboards/doro67/multi/keymaps/default/keymap.c @@ -0,0 +1,36 @@ +/* Copyright 2019 ShadeDream + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ +#include QMK_KEYBOARD_H + + + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [0] = LAYOUT_ansi( + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_INS, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_PGUP, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_LSFT, KC_UP, KC_PGDN, + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_LALT, MO(1), KC_LEFT, KC_DOWN, KC_RGHT + ), + [1] = LAYOUT_ansi( + KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_TRNS, KC_TRNS, + BL_TOGG, BL_STEP, BL_DEC, BL_INC, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS + ), + +}; diff --git a/keyboards/doro67/multi/keymaps/default/readme.md b/keyboards/doro67/multi/keymaps/default/readme.md new file mode 100644 index 00000000000..6e63cde3a16 --- /dev/null +++ b/keyboards/doro67/multi/keymaps/default/readme.md @@ -0,0 +1,36 @@ +# Default Doro67 ANSI layout. + +This is the default ANSI layout that comes flashed on the Doro67 multi PCB with +the exception of adding backtick as it was not mapped. + +Default Layer: + +``` +,---------------------------------------------------------------. +|Esc| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =|BackSp |Ins| +|---------------------------------------------------------------| +|Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| \ |Del| +|---------------------------------------------------------------| +|Ctrl | A| S| D| F| G| H| J| K| L| ;| '| Enter |PUp| +|---------------------------------------------------------------| +|Shift | Z| X| C| V| B| N| M| ,| .| /| Shift| Up|PDn| +|---------------------------------------------------------------| +|Ctrl |GUI |Alt | Space |Alt |FN |Lft|Dwn|Rgt| +`---------------------------------------------------------------' +``` + +FN Layer: + +``` +,---------------------------------------------------------------. +|` | F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12| | | +|---------------------------------------------------------------| +|BLTog|Stp|Dec|Inc| | | | | | | | | | | | +|---------------------------------------------------------------| +| | | | | | | | | | | | | | | +|---------------------------------------------------------------| +| | | | | | | | | | | | | | | +|---------------------------------------------------------------| +| | | | | | | | | | +`---------------------------------------------------------------' +``` diff --git a/keyboards/doro67/multi/keymaps/default_iso/keymap.c b/keyboards/doro67/multi/keymaps/default_iso/keymap.c new file mode 100644 index 00000000000..2e8d8398204 --- /dev/null +++ b/keyboards/doro67/multi/keymaps/default_iso/keymap.c @@ -0,0 +1,36 @@ +/* Copyright 2019 ShadeDream + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ +#include QMK_KEYBOARD_H + + + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [0] = LAYOUT_iso( + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_INS, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_ENT, KC_DEL, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_NUHS, KC_PGUP, + KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_LSFT, KC_UP, KC_PGDN, + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_LALT, MO(1), KC_LEFT, KC_DOWN, KC_RGHT + ), + [1] = LAYOUT_iso( + KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_TRNS, KC_TRNS, + BL_TOGG, BL_STEP, BL_DEC, BL_INC, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS + ), + +}; diff --git a/keyboards/doro67/multi/keymaps/default_iso/readme.md b/keyboards/doro67/multi/keymaps/default_iso/readme.md new file mode 100644 index 00000000000..d375f0cc5d2 --- /dev/null +++ b/keyboards/doro67/multi/keymaps/default_iso/readme.md @@ -0,0 +1,36 @@ +# Default Doro67 ISO layout. + +This is the default ISO layout that comes flashed on the Doro67 multi PCB with +the exception of adding backtick and UK ISO specific keycodes as they were not mapped. + +Default Layer: + +``` +,---------------------------------------------------------------. +|Esc| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =|BackSp |Ins| +|---------------------------------------------------------------| +|Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| |Del| +|------------------------------------------------------|Entr|---| +|Ctrl | A| S| D| F| G| H| J| K| L| ;| '| #| |PUp| +|---------------------------------------------------------------| +|Shft| \| Z| X| C| V| B| N| M| ,| .| /| Shift| Up|PDn| +|---------------------------------------------------------------| +|Ctrl |GUI |Alt | Space |Alt |FN |Lft|Dwn|Rgt| +`---------------------------------------------------------------' +``` + +FN Layer: + +``` +,---------------------------------------------------------------. +|` | F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12| | | +|---------------------------------------------------------------| +|BLTog|Stp|Dec|Inc| | | | | | | | | | | | +|------------------------------------------------------| |---| +| | | | | | | | | | | | | | | | +|---------------------------------------------------------------| +| | | | | | | | | | | | | | | | +|---------------------------------------------------------------| +| | | | | | | | | | +`---------------------------------------------------------------' +``` diff --git a/keyboards/doro67/multi/keymaps/default_multi/keymap.c b/keyboards/doro67/multi/keymaps/default_multi/keymap.c new file mode 100644 index 00000000000..e57dce1ea2b --- /dev/null +++ b/keyboards/doro67/multi/keymaps/default_multi/keymap.c @@ -0,0 +1,36 @@ +/* Copyright 2019 ShadeDream + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ +#include QMK_KEYBOARD_H + + + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [0] = LAYOUT_multi( + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_F2, KC_INS, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_PGUP, + KC_LSFT, KC_F1, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_PGDN, + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_SPC, KC_SPC, KC_RALT, MO(1), KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT + ), + [1] = LAYOUT_multi( + KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_TRNS, KC_TRNS, KC_TRNS, + BL_TOGG, BL_STEP, BL_DEC, BL_INC, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS + ), + +}; diff --git a/keyboards/doro67/multi/keymaps/default_multi/readme.md b/keyboards/doro67/multi/keymaps/default_multi/readme.md new file mode 100644 index 00000000000..e32f820c289 --- /dev/null +++ b/keyboards/doro67/multi/keymaps/default_multi/readme.md @@ -0,0 +1,39 @@ +# Default Doro67 Multi layout. + +This is the default Multi layout that comes flashed on the Doro67 multi PCB with +the exception of adding backtick as it was not mapped. + +This layout supports both the blocker and non-blocker layouts (2 & 4) with the +difference that the blocker layout lacks the right control key. + +Default Layer: + +``` +,---------------------------------------------------------------. +|Esc| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =| BS| F2|Ins| +|---------------------------------------------------------------| +|Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| \ |Del| +|---------------------------------------------------------------| +|Ctrl | A| S| D| F| G| H| J| K| L| ;| '| Enter |PUp| +|---------------------------------------------------------------| +|Shft| F1| Z| X| C| V| B| N| M| ,| .| /| Shift| Up|PDn| +|---------------------------------------------------------------| +|Ctrl |GUI |Alt | Space |Space| Space |Alt|MO1|Ctl|Lft|Dwn|Rgt| +`---------------------------------------------------------------' +``` + +FN Layer: + +``` +,---------------------------------------------------------------. +|` | F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12| | | +|---------------------------------------------------------------| +|BLTog|Stp|Dec|Inc| | | | | | | | | | | | +|---------------------------------------------------------------| +| | | | | | | | | | | | | | | +|---------------------------------------------------------------| +| | | | | | | | | | | | | | | | +|---------------------------------------------------------------| +| | | | | | | | | | | | | +`---------------------------------------------------------------' +``` diff --git a/keyboards/doro67/multi/multi.c b/keyboards/doro67/multi/multi.c new file mode 100644 index 00000000000..477ab245c34 --- /dev/null +++ b/keyboards/doro67/multi/multi.c @@ -0,0 +1,43 @@ +/* Copyright 2019 ShadeDream + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ +#include "multi.h" + +void matrix_init_kb(void) { + // put your keyboard start-up code here + // runs once when the firmware starts up + + matrix_init_user(); +} + +void matrix_scan_kb(void) { + // put your looping keyboard code here + // runs every cycle (a lot) + + matrix_scan_user(); +} + +bool process_record_kb(uint16_t keycode, keyrecord_t *record) { + // put your per-action keyboard code here + // runs for every action, just before processing by the firmware + + return process_record_user(keycode, record); +} + +void led_set_kb(uint8_t usb_led) { + // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here + + led_set_user(usb_led); +} diff --git a/keyboards/doro67/multi/multi.h b/keyboards/doro67/multi/multi.h new file mode 100644 index 00000000000..0b68aed4260 --- /dev/null +++ b/keyboards/doro67/multi/multi.h @@ -0,0 +1,59 @@ +/* Copyright 2019 ShadeDream + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ +#pragma once + +#include "quantum.h" + +#define LAYOUT_ansi( \ + K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E, \ + K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E, \ + K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2D, K2E, \ + K30, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, K3E, \ + K40, K41, K42, K44, K49, K4A, K4C, K4D, K4E \ +) { \ + { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E }, \ + { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E }, \ + { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, KC_NO, K2D, K2E }, \ + { K30, KC_NO, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, K3E }, \ + { K40, K41, K42, KC_NO, K44, KC_NO, KC_NO, KC_NO, KC_NO, K49, K4A, KC_NO, K4C, K4D, K4E }, \ +} + +#define LAYOUT_iso( \ + K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E, \ + K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E, \ + K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2D, K2E, \ + K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, K3E, \ + K40, K41, K42, K44, K49, K4A, K4C, K4D, K4E \ +) { \ + { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E }, \ + { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E }, \ + { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, KC_NO, K2D, K2E }, \ + { K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, K3E }, \ + { K40, K41, K42, KC_NO, K44, KC_NO, KC_NO, KC_NO, KC_NO, K49, K4A, KC_NO, K4C, K4D, K4E }, \ +} + +#define LAYOUT_multi( \ + K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K48, K0E, \ + K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E, \ + K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2D, K2E, \ + K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, K3E, \ + K40, K41, K42, K43, K44, K45, K49, K4A, K4B, K4C, K4D, K4E \ +) { \ + { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E }, \ + { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E }, \ + { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, KC_NO, K2D, K2E }, \ + { K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, K3E }, \ + { K40, K41, K42, K43, K44, K45, KC_NO, KC_NO, K48, K49, K4A, K4B, K4C, K4D, K4E }, \ +} diff --git a/keyboards/doro67/multi/readme.md b/keyboards/doro67/multi/readme.md new file mode 100644 index 00000000000..ac1484cd743 --- /dev/null +++ b/keyboards/doro67/multi/readme.md @@ -0,0 +1,16 @@ +Doro67 Multi PCB +=== + +A custom 65% keyboard with multiple layout support. + +Do not flash RGB firmware for this board. + +Keyboard Maintainer: [ShadeDream](https://github.com/shadedream) +Hardware Supported: Doro67 Multi PCB +Hardware Availability: [Geekhack GB](https://geekhack.org/index.php?topic=97265.0) + +Make example for this keyboard (after setting up your build environment): + + make doro67/multi:default + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/doro67/multi/rules.mk b/keyboards/doro67/multi/rules.mk new file mode 100644 index 00000000000..387ce74822c --- /dev/null +++ b/keyboards/doro67/multi/rules.mk @@ -0,0 +1,47 @@ +MCU = atmega32u4 +F_CPU = 16000000 +ARCH = AVR8 +F_USB = $(F_CPU) +OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT + + +# Bootloader selection +# Teensy halfkay +# Pro Micro caterina +# Atmel DFU atmel-dfu +# LUFA DFU lufa-dfu +# QMK DFU qmk-dfu +# atmega32a bootloadHID +BOOTLOADER = atmel-dfu + + +# If you don't know the bootloader type, then you can specify the +# Boot Section Size in *bytes* by uncommenting out the OPT_DEFS line +# Teensy halfKay 512 +# Teensy++ halfKay 1024 +# Atmel DFU loader 4096 +# LUFA bootloader 4096 +# USBaspLoader 2048 +# OPT_DEFS += -DBOOTLOADER_SIZE=4096 + + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = yes # Mouse keys(+4700) +EXTRAKEY_ENABLE = yes # Audio control and System control(+450) +CONSOLE_ENABLE = yes # Console for debug(+400) +COMMAND_ENABLE = yes # Commands for debug and configuration +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend +# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +NKRO_ENABLE = no # USB Nkey Rollover +BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality on B7 by default +RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow +MIDI_ENABLE = no # MIDI support (+2400 to 4200, depending on config) +UNICODE_ENABLE = no # Unicode +BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID +AUDIO_ENABLE = no # Audio output on port C6 +FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches +HD44780_ENABLE = no # Enable support for HD44780 based LCDs (+400) From debd902a3d5788beab8580a26c84d7db2365a638 Mon Sep 17 00:00:00 2001 From: marksard <38324387+marksard@users.noreply.github.com> Date: Thu, 4 Apr 2019 14:56:22 +0900 Subject: [PATCH 024/171] [Keyboard] add treeadstone48 (#5405) * Keyboard: add treeadstone48 * rename layout defines * Use of pragma once * move common include code * fixed info.json * change keymap layout from kc to normal * fix alpha revision keymap * fixed info.json * remove USE_Link_Time_Optimization --- keyboards/treadstone48/common/glcdfont.c | 244 ++++++++ keyboards/treadstone48/common/oled_helper.c | 83 +++ keyboards/treadstone48/common/oled_helper.h | 35 ++ keyboards/treadstone48/config.h | 43 ++ keyboards/treadstone48/i2c.c | 162 +++++ keyboards/treadstone48/i2c.h | 46 ++ .../treadstone48/keymaps/default/config.h | 60 ++ .../treadstone48/keymaps/default/keymap.c | 278 +++++++++ .../treadstone48/keymaps/default/readme.md | 5 + .../treadstone48/keymaps/default/readme_jp.md | 80 +++ .../treadstone48/keymaps/default/rules.mk | 67 ++ .../treadstone48/keymaps/like_jis/config.h | 60 ++ .../treadstone48/keymaps/like_jis/keymap.c | 278 +++++++++ .../treadstone48/keymaps/like_jis/readme.md | 5 + .../keymaps/like_jis/readme_jp.md | 80 +++ .../treadstone48/keymaps/like_jis/rules.mk | 67 ++ .../treadstone48/keymaps/like_jis_rs/config.h | 60 ++ .../treadstone48/keymaps/like_jis_rs/keymap.c | 342 ++++++++++ .../keymaps/like_jis_rs/readme.md | 5 + .../keymaps/like_jis_rs/readme_jp.md | 84 +++ .../treadstone48/keymaps/like_jis_rs/rules.mk | 67 ++ keyboards/treadstone48/pro_micro.h | 362 +++++++++++ keyboards/treadstone48/readme.md | 18 + keyboards/treadstone48/rev1/config.h | 133 ++++ keyboards/treadstone48/rev1/info.json | 261 ++++++++ keyboards/treadstone48/rev1/matrix.c | 357 +++++++++++ keyboards/treadstone48/rev1/rev1.c | 15 + keyboards/treadstone48/rev1/rev1.h | 202 ++++++ keyboards/treadstone48/rev1/rules.mk | 3 + keyboards/treadstone48/rev1/serial_config.h | 8 + .../rev1/serial_config_simpleapi.h | 8 + keyboards/treadstone48/rev1/split_scomm.c | 92 +++ keyboards/treadstone48/rev1/split_scomm.h | 21 + keyboards/treadstone48/rev1/split_util.c | 70 +++ keyboards/treadstone48/rev1/split_util.h | 16 + keyboards/treadstone48/rules.mk | 73 +++ keyboards/treadstone48/serial.c | 590 ++++++++++++++++++ keyboards/treadstone48/serial.h | 86 +++ keyboards/treadstone48/ssd1306.c | 342 ++++++++++ keyboards/treadstone48/ssd1306.h | 90 +++ keyboards/treadstone48/treadstone48.c | 1 + keyboards/treadstone48/treadstone48.h | 15 + 42 files changed, 4914 insertions(+) create mode 100644 keyboards/treadstone48/common/glcdfont.c create mode 100644 keyboards/treadstone48/common/oled_helper.c create mode 100644 keyboards/treadstone48/common/oled_helper.h create mode 100644 keyboards/treadstone48/config.h create mode 100644 keyboards/treadstone48/i2c.c create mode 100644 keyboards/treadstone48/i2c.h create mode 100644 keyboards/treadstone48/keymaps/default/config.h create mode 100644 keyboards/treadstone48/keymaps/default/keymap.c create mode 100644 keyboards/treadstone48/keymaps/default/readme.md create mode 100644 keyboards/treadstone48/keymaps/default/readme_jp.md create mode 100644 keyboards/treadstone48/keymaps/default/rules.mk create mode 100644 keyboards/treadstone48/keymaps/like_jis/config.h create mode 100644 keyboards/treadstone48/keymaps/like_jis/keymap.c create mode 100644 keyboards/treadstone48/keymaps/like_jis/readme.md create mode 100644 keyboards/treadstone48/keymaps/like_jis/readme_jp.md create mode 100644 keyboards/treadstone48/keymaps/like_jis/rules.mk create mode 100644 keyboards/treadstone48/keymaps/like_jis_rs/config.h create mode 100644 keyboards/treadstone48/keymaps/like_jis_rs/keymap.c create mode 100644 keyboards/treadstone48/keymaps/like_jis_rs/readme.md create mode 100644 keyboards/treadstone48/keymaps/like_jis_rs/readme_jp.md create mode 100644 keyboards/treadstone48/keymaps/like_jis_rs/rules.mk create mode 100644 keyboards/treadstone48/pro_micro.h create mode 100644 keyboards/treadstone48/readme.md create mode 100644 keyboards/treadstone48/rev1/config.h create mode 100644 keyboards/treadstone48/rev1/info.json create mode 100644 keyboards/treadstone48/rev1/matrix.c create mode 100644 keyboards/treadstone48/rev1/rev1.c create mode 100644 keyboards/treadstone48/rev1/rev1.h create mode 100644 keyboards/treadstone48/rev1/rules.mk create mode 100644 keyboards/treadstone48/rev1/serial_config.h create mode 100644 keyboards/treadstone48/rev1/serial_config_simpleapi.h create mode 100644 keyboards/treadstone48/rev1/split_scomm.c create mode 100644 keyboards/treadstone48/rev1/split_scomm.h create mode 100644 keyboards/treadstone48/rev1/split_util.c create mode 100644 keyboards/treadstone48/rev1/split_util.h create mode 100644 keyboards/treadstone48/rules.mk create mode 100644 keyboards/treadstone48/serial.c create mode 100644 keyboards/treadstone48/serial.h create mode 100644 keyboards/treadstone48/ssd1306.c create mode 100644 keyboards/treadstone48/ssd1306.h create mode 100644 keyboards/treadstone48/treadstone48.c create mode 100644 keyboards/treadstone48/treadstone48.h diff --git a/keyboards/treadstone48/common/glcdfont.c b/keyboards/treadstone48/common/glcdfont.c new file mode 100644 index 00000000000..32c688e2bb3 --- /dev/null +++ b/keyboards/treadstone48/common/glcdfont.c @@ -0,0 +1,244 @@ +// This is the 'classic' fixed-space bitmap font for Adafruit_GFX since 1.0. +// See gfxfont.h for newer custom bitmap font info. + +#ifndef FONT5X7_H +#define FONT5X7_H + +#ifdef __AVR__ + #include + #include +#elif defined(ESP8266) + #include +#else + #define PROGMEM +#endif + +// Standard ASCII 5x7 font + +static const unsigned char font[] PROGMEM = { + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x3E, 0x5B, 0x4F, 0x5B, 0x3E, 0x00, + 0x3E, 0x6B, 0x4F, 0x6B, 0x3E, 0x00, + 0x1C, 0x3E, 0x7C, 0x3E, 0x1C, 0x00, + 0x18, 0x3C, 0x7E, 0x3C, 0x18, 0x00, + 0x1C, 0x57, 0x7D, 0x57, 0x1C, 0x00, + 0x1C, 0x5E, 0x7F, 0x5E, 0x1C, 0x00, + 0x00, 0x18, 0x3C, 0x18, 0x00, 0x00, + 0xFF, 0xE7, 0xC3, 0xE7, 0xFF, 0x00, + 0x00, 0x18, 0x24, 0x18, 0x00, 0x00, + 0xFF, 0xE7, 0xDB, 0xE7, 0xFF, 0x00, + 0x30, 0x48, 0x3A, 0x06, 0x0E, 0x00, + 0x26, 0x29, 0x79, 0x29, 0x26, 0x00, + 0x40, 0x7F, 0x05, 0x05, 0x07, 0x00, + 0x40, 0x7F, 0x05, 0x25, 0x3F, 0x00, + 0x5A, 0x3C, 0xE7, 0x3C, 0x5A, 0x00, + 0x7F, 0x3E, 0x1C, 0x1C, 0x08, 0x00, + 0x08, 0x1C, 0x1C, 0x3E, 0x7F, 0x00, + 0x14, 0x22, 0x7F, 0x22, 0x14, 0x00, + 0x5F, 0x5F, 0x00, 0x5F, 0x5F, 0x00, + 0x06, 0x09, 0x7F, 0x01, 0x7F, 0x00, + 0x00, 0x66, 0x89, 0x95, 0x6A, 0x00, + 0x60, 0x60, 0x60, 0x60, 0x60, 0x00, + 0x94, 0xA2, 0xFF, 0xA2, 0x94, 0x00, + 0x08, 0x04, 0x7E, 0x04, 0x08, 0x00, + 0x10, 0x20, 0x7E, 0x20, 0x10, 0x00, + 0x08, 0x08, 0x2A, 0x1C, 0x08, 0x00, + 0x08, 0x1C, 0x2A, 0x08, 0x08, 0x00, + 0x1E, 0x10, 0x10, 0x10, 0x10, 0x00, + 0x0C, 0x1E, 0x0C, 0x1E, 0x0C, 0x00, + 0x30, 0x38, 0x3E, 0x38, 0x30, 0x00, + 0x06, 0x0E, 0x3E, 0x0E, 0x06, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x5F, 0x00, 0x00, 0x00, + 0x00, 0x07, 0x00, 0x07, 0x00, 0x00, + 0x14, 0x7F, 0x14, 0x7F, 0x14, 0x00, + 0x24, 0x2A, 0x7F, 0x2A, 0x12, 0x00, + 0x23, 0x13, 0x08, 0x64, 0x62, 0x00, + 0x36, 0x49, 0x56, 0x20, 0x50, 0x00, + 0x00, 0x08, 0x07, 0x03, 0x00, 0x00, + 0x00, 0x1C, 0x22, 0x41, 0x00, 0x00, + 0x00, 0x41, 0x22, 0x1C, 0x00, 0x00, + 0x2A, 0x1C, 0x7F, 0x1C, 0x2A, 0x00, + 0x08, 0x08, 0x3E, 0x08, 0x08, 0x00, + 0x00, 0x80, 0x70, 0x30, 0x00, 0x00, + 0x08, 0x08, 0x08, 0x08, 0x08, 0x00, + 0x00, 0x00, 0x60, 0x60, 0x00, 0x00, + 0x20, 0x10, 0x08, 0x04, 0x02, 0x00, + 0x3E, 0x51, 0x49, 0x45, 0x3E, 0x00, + 0x00, 0x42, 0x7F, 0x40, 0x00, 0x00, + 0x72, 0x49, 0x49, 0x49, 0x46, 0x00, + 0x21, 0x41, 0x49, 0x4D, 0x33, 0x00, + 0x18, 0x14, 0x12, 0x7F, 0x10, 0x00, + 0x27, 0x45, 0x45, 0x45, 0x39, 0x00, + 0x3C, 0x4A, 0x49, 0x49, 0x31, 0x00, + 0x41, 0x21, 0x11, 0x09, 0x07, 0x00, + 0x36, 0x49, 0x49, 0x49, 0x36, 0x00, + 0x46, 0x49, 0x49, 0x29, 0x1E, 0x00, + 0x00, 0x00, 0x14, 0x00, 0x00, 0x00, + 0x00, 0x40, 0x34, 0x00, 0x00, 0x00, + 0x00, 0x08, 0x14, 0x22, 0x41, 0x00, + 0x14, 0x14, 0x14, 0x14, 0x14, 0x00, + 0x00, 0x41, 0x22, 0x14, 0x08, 0x00, + 0x02, 0x01, 0x59, 0x09, 0x06, 0x00, + 0x3E, 0x41, 0x5D, 0x59, 0x4E, 0x00, + 0x7C, 0x12, 0x11, 0x12, 0x7C, 0x00, + 0x7F, 0x49, 0x49, 0x49, 0x36, 0x00, + 0x3E, 0x41, 0x41, 0x41, 0x22, 0x00, + 0x7F, 0x41, 0x41, 0x41, 0x3E, 0x00, + 0x7F, 0x49, 0x49, 0x49, 0x41, 0x00, + 0x7F, 0x09, 0x09, 0x09, 0x01, 0x00, + 0x3E, 0x41, 0x41, 0x51, 0x73, 0x00, + 0x7F, 0x08, 0x08, 0x08, 0x7F, 0x00, + 0x00, 0x41, 0x7F, 0x41, 0x00, 0x00, + 0x20, 0x40, 0x41, 0x3F, 0x01, 0x00, + 0x7F, 0x08, 0x14, 0x22, 0x41, 0x00, + 0x7F, 0x40, 0x40, 0x40, 0x40, 0x00, + 0x7F, 0x02, 0x1C, 0x02, 0x7F, 0x00, + 0x7F, 0x04, 0x08, 0x10, 0x7F, 0x00, + 0x3E, 0x41, 0x41, 0x41, 0x3E, 0x00, + 0x7F, 0x09, 0x09, 0x09, 0x06, 0x00, + 0x3E, 0x41, 0x51, 0x21, 0x5E, 0x00, + 0x7F, 0x09, 0x19, 0x29, 0x46, 0x00, + 0x26, 0x49, 0x49, 0x49, 0x32, 0x00, + 0x03, 0x01, 0x7F, 0x01, 0x03, 0x00, + 0x3F, 0x40, 0x40, 0x40, 0x3F, 0x00, + 0x1F, 0x20, 0x40, 0x20, 0x1F, 0x00, + 0x3F, 0x40, 0x38, 0x40, 0x3F, 0x00, + 0x63, 0x14, 0x08, 0x14, 0x63, 0x00, + 0x03, 0x04, 0x78, 0x04, 0x03, 0x00, + 0x61, 0x59, 0x49, 0x4D, 0x43, 0x00, + 0x00, 0x7F, 0x41, 0x41, 0x41, 0x00, + 0x02, 0x04, 0x08, 0x10, 0x20, 0x00, + 0x00, 0x41, 0x41, 0x41, 0x7F, 0x00, + 0x04, 0x02, 0x01, 0x02, 0x04, 0x00, + 0x40, 0x40, 0x40, 0x40, 0x40, 0x00, + 0x00, 0x03, 0x07, 0x08, 0x00, 0x00, + 0x20, 0x54, 0x54, 0x78, 0x40, 0x00, + 0x7F, 0x28, 0x44, 0x44, 0x38, 0x00, + 0x38, 0x44, 0x44, 0x44, 0x28, 0x00, + 0x38, 0x44, 0x44, 0x28, 0x7F, 0x00, + 0x38, 0x54, 0x54, 0x54, 0x18, 0x00, + 0x00, 0x08, 0x7E, 0x09, 0x02, 0x00, + 0x18, 0x24, 0x24, 0x1C, 0x78, 0x00, + 0x7F, 0x08, 0x04, 0x04, 0x78, 0x00, + 0x00, 0x44, 0x7D, 0x40, 0x00, 0x00, + 0x20, 0x40, 0x40, 0x3D, 0x00, 0x00, + 0x7F, 0x10, 0x28, 0x44, 0x00, 0x00, + 0x00, 0x41, 0x7F, 0x40, 0x00, 0x00, + 0x7C, 0x04, 0x78, 0x04, 0x78, 0x00, + 0x7C, 0x08, 0x04, 0x04, 0x78, 0x00, + 0x38, 0x44, 0x44, 0x44, 0x38, 0x00, + 0xFC, 0x18, 0x24, 0x24, 0x18, 0x00, + 0x18, 0x24, 0x24, 0x18, 0xFC, 0x00, + 0x7C, 0x08, 0x04, 0x04, 0x08, 0x00, + 0x48, 0x54, 0x54, 0x54, 0x24, 0x00, + 0x04, 0x04, 0x3F, 0x44, 0x24, 0x00, + 0x3C, 0x40, 0x40, 0x20, 0x7C, 0x00, + 0x1C, 0x20, 0x40, 0x20, 0x1C, 0x00, + 0x3C, 0x40, 0x30, 0x40, 0x3C, 0x00, + 0x44, 0x28, 0x10, 0x28, 0x44, 0x00, + 0x4C, 0x10, 0x10, 0x10, 0x7C, 0x00, + 0x44, 0x64, 0x54, 0x4C, 0x44, 0x00, + 0x00, 0x08, 0x36, 0x41, 0x00, 0x00, + 0x00, 0x00, 0x77, 0x00, 0x00, 0x00, + 0x00, 0x41, 0x36, 0x08, 0x00, 0x00, + 0x02, 0x01, 0x02, 0x04, 0x02, 0x00, + 0x3C, 0x26, 0x23, 0x26, 0x3C, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +}; +#endif // FONT5X7_H diff --git a/keyboards/treadstone48/common/oled_helper.c b/keyboards/treadstone48/common/oled_helper.c new file mode 100644 index 00000000000..500d3c0dc10 --- /dev/null +++ b/keyboards/treadstone48/common/oled_helper.c @@ -0,0 +1,83 @@ +#ifdef SSD1306OLED +#include QMK_KEYBOARD_H +#include "ssd1306.h" + +void render_logo(struct CharacterMatrix *matrix) { + + const char logo_buf[]={ + 0x80,0x81,0x82,0x83,0x84,0x85,0x86,0x87,0x88,0x89,0x8a,0x8b,0x8c,0x8d,0x8e,0x8f,0x90,0x91,0x92,0x93,0x94, + 0xa0,0xa1,0xa2,0xa3,0xa4,0xa5,0xa6,0xa7,0xa8,0xa9,0xaa,0xab,0xac,0xad,0xae,0xaf,0xb0,0xb1,0xb2,0xb3,0xb4, + 0xc0,0xc1,0xc2,0xc3,0xc4,0xc5,0xc6,0xc7,0xc8,0xc9,0xca,0xcb,0xcc,0xcd,0xce,0xcf,0xd0,0xd1,0xd2,0xd3,0xd4, + 0}; + + matrix_write(matrix, logo_buf); +} + +static char keylog_buf[24] = "Key state ready."; +const char code_to_name[60] = { + ' ', ' ', ' ', ' ', 'a', 'b', 'c', 'd', 'e', 'f', + 'g', 'h', 'i', 'j', 'k', 'l', 'm', 'n', 'o', 'p', + 'q', 'r', 's', 't', 'u', 'v', 'w', 'x', 'y', 'z', + '1', '2', '3', '4', '5', '6', '7', '8', '9', '0', + 'R', 'E', 'B', 'T', ' ', '-', ' ', '@', ' ', ' ', + ' ', ';', ':', ' ', ',', '.', '/', ' ', ' ', ' '}; + +void update_key_status(uint16_t keycode, keyrecord_t *record) { + + if (!record->event.pressed) return; + + char name = (keycode < 60) ? code_to_name[keycode] : ' '; + snprintf(keylog_buf, sizeof(keylog_buf) - 1, "Key:%dx%d %2x %c", + record->event.key.row, record->event.key.col, + (uint16_t)keycode, name); +} + +void render_key_status(struct CharacterMatrix *matrix) { + + matrix_write(matrix, keylog_buf); +} + +static char lock_buf[24] = "Lock state ready.\n"; +void update_lock_status(void) { + + uint8_t leds = host_keyboard_leds(); + char *num_lock = (leds & (1< +Copyright 2015 Jack Humbert + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#pragma once + +#include "config_common.h" + +// GCC include 'config.h" sequence in qmk_firmware/keyboards/treadstone48/ +// -include keyboards/treadstone48/config.h +// -include keyboards/treadstone48/rev?/config.h +// -include keyboards/treadstone48/rev?/keymaps/MAPNAME/config.h +// XXXX.c + +#include + +// GCC include search path in qmk_firmare/keyboards/treadstone48/ +// #include "..." search starts here: +// #include <...> search starts here: +// keyboards/treadstone48/rev?/keymaps/MAPNAME +// keyboards/treadstone48 +// keyboards/treadstone48/rev? +// . +// ./tmk_core +// ...... + +// MACRO and FUNCTION are features that are depreciated. +#define NO_ACTION_MACRO +#define NO_ACTION_FUNCTION diff --git a/keyboards/treadstone48/i2c.c b/keyboards/treadstone48/i2c.c new file mode 100644 index 00000000000..4bee5c63982 --- /dev/null +++ b/keyboards/treadstone48/i2c.c @@ -0,0 +1,162 @@ +#include +#include +#include +#include +#include +#include +#include "i2c.h" + +#ifdef USE_I2C + +// Limits the amount of we wait for any one i2c transaction. +// Since were running SCL line 100kHz (=> 10μs/bit), and each transactions is +// 9 bits, a single transaction will take around 90μs to complete. +// +// (F_CPU/SCL_CLOCK) => # of μC cycles to transfer a bit +// poll loop takes at least 8 clock cycles to execute +#define I2C_LOOP_TIMEOUT (9+1)*(F_CPU/SCL_CLOCK)/8 + +#define BUFFER_POS_INC() (slave_buffer_pos = (slave_buffer_pos+1)%SLAVE_BUFFER_SIZE) + +volatile uint8_t i2c_slave_buffer[SLAVE_BUFFER_SIZE]; + +static volatile uint8_t slave_buffer_pos; +static volatile bool slave_has_register_set = false; + +// Wait for an i2c operation to finish +inline static +void i2c_delay(void) { + uint16_t lim = 0; + while(!(TWCR & (1<10. + // Check datasheets for more info. + TWBR = ((F_CPU/SCL_CLOCK)-16)/2; +} + +// Start a transaction with the given i2c slave address. The direction of the +// transfer is set with I2C_READ and I2C_WRITE. +// returns: 0 => success +// 1 => error +uint8_t i2c_master_start(uint8_t address) { + TWCR = (1< slave ACK +// 1 => slave NACK +uint8_t i2c_master_write(uint8_t data) { + TWDR = data; + TWCR = (1<= SLAVE_BUFFER_SIZE ) { + ack = 0; + slave_buffer_pos = 0; + } + slave_has_register_set = true; + } else { + i2c_slave_buffer[slave_buffer_pos] = TWDR; + BUFFER_POS_INC(); + } + break; + + case TW_ST_SLA_ACK: + case TW_ST_DATA_ACK: + // master has addressed this device as a slave transmitter and is + // requesting data. + TWDR = i2c_slave_buffer[slave_buffer_pos]; + BUFFER_POS_INC(); + break; + + case TW_BUS_ERROR: // something went wrong, reset twi state + TWCR = 0; + default: + break; + } + // Reset everything, so we are ready for the next TWI interrupt + TWCR |= (1< + +#ifndef F_CPU +#define F_CPU 16000000UL +#endif + +#define I2C_READ 1 +#define I2C_WRITE 0 + +#define I2C_ACK 1 +#define I2C_NACK 0 + +#define SLAVE_BUFFER_SIZE 0x10 + +// i2c SCL clock frequency 400kHz +#define SCL_CLOCK 400000L + +extern volatile uint8_t i2c_slave_buffer[SLAVE_BUFFER_SIZE]; + +void i2c_master_init(void); +uint8_t i2c_master_start(uint8_t address); +void i2c_master_stop(void); +uint8_t i2c_master_write(uint8_t data); +uint8_t i2c_master_read(int); +void i2c_reset_state(void); +void i2c_slave_init(uint8_t address); + + +static inline unsigned char i2c_start_read(unsigned char addr) { + return i2c_master_start((addr << 1) | I2C_READ); +} + +static inline unsigned char i2c_start_write(unsigned char addr) { + return i2c_master_start((addr << 1) | I2C_WRITE); +} + +// from SSD1306 scrips +extern unsigned char i2c_rep_start(unsigned char addr); +extern void i2c_start_wait(unsigned char addr); +extern unsigned char i2c_readAck(void); +extern unsigned char i2c_readNak(void); +extern unsigned char i2c_read(unsigned char ack); + +#define i2c_read(ack) (ack) ? i2c_readAck() : i2c_readNak(); diff --git a/keyboards/treadstone48/keymaps/default/config.h b/keyboards/treadstone48/keymaps/default/config.h new file mode 100644 index 00000000000..3f63a0cfbbd --- /dev/null +++ b/keyboards/treadstone48/keymaps/default/config.h @@ -0,0 +1,60 @@ +/* +This is the c configuration file for the keymap + +Copyright 2012 Jun Wako +Copyright 2015 Jack Humbert + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#pragma once + +// place overrides here + +#ifdef TAPPING_TERM +#undef TAPPING_TERM +#endif +#define TAPPING_TERM 225 +// #define PREVENT_STUCK_MODIFIERS +// #define IGNORE_MOD_TAP_INTERRUPT + +#ifdef MOUSEKEY_ENABLE + #undef MOUSEKEY_INTERVAL + #define MOUSEKEY_INTERVAL 1 + + #undef MOUSEKEY_TIME_TO_MAX + #define MOUSEKEY_TIME_TO_MAX 150 + + #undef MOUSEKEY_MAX_SPEED + #define MOUSEKEY_MAX_SPEED 3 + + #undef MOUSEKEY_MOVE_DELTA + #define MOUSEKEY_MOVE_DELTA 4 + + #undef MOUSEKEY_DELAY + #define MOUSEKEY_DELAY 0 +#endif + +// Selection of RGBLIGHT MODE to use. +#if defined(LED_ANIMATIONS) + //#define RGBLIGHT_EFFECT_BREATHING + #define RGBLIGHT_EFFECT_RAINBOW_MOOD + #define RGBLIGHT_EFFECT_RAINBOW_SWIRL + //#define RGBLIGHT_EFFECT_SNAKE + #define RGBLIGHT_EFFECT_KNIGHT + //#define RGBLIGHT_EFFECT_CHRISTMAS + #define RGBLIGHT_EFFECT_STATIC_GRADIENT + //#define RGBLIGHT_EFFECT_RGB_TEST + //#define RGBLIGHT_EFFECT_ALTERNATING +#endif diff --git a/keyboards/treadstone48/keymaps/default/keymap.c b/keyboards/treadstone48/keymaps/default/keymap.c new file mode 100644 index 00000000000..406f1129212 --- /dev/null +++ b/keyboards/treadstone48/keymaps/default/keymap.c @@ -0,0 +1,278 @@ +#include QMK_KEYBOARD_H +#include "keymap_jp.h" +#include "../common/oled_helper.h" + +extern keymap_config_t keymap_config; + +#ifdef RGBLIGHT_ENABLE +//Following line allows macro to read current RGB settings +extern rgblight_config_t rgblight_config; +#endif + +extern uint8_t is_master; + +// Each layer gets a name for readability, which is then used in the keymap matrix below. +// The underscores don't mean anything - you can have a layer called STUFF or any other name. +// Layer names don't all need to be of the same length, obviously, and you can also skip them +// entirely and just use numbers. +enum layer_number { + _BASE = 0, + _LOWER, + _RAISE, + _ADJUST, +}; + +enum custom_keycodes { + LOWER = SAFE_RANGE, + RAISE, + ADJUST, + KANJI, + RGBRST +}; + +enum tapdances{ + TD_SCCL = 0, + TD_SLRO, +}; + +// Layer Mode aliases +#define _____ KC_TRNS +#define XXXXX KC_NO + +#define KC_TBSF LSFT_T(KC_TAB) +// #define KC_SPSF LSFT_T(KC_SPC) +#define KC_ALAP LALT_T(KC_APP) +#define KC_JEQL LSFT(KC_MINS) + +#define KC_SCCL TD(TD_SCCL) +#define KC_SLRO TD(TD_SLRO) + +qk_tap_dance_action_t tap_dance_actions[] = { + [TD_SCCL] = ACTION_TAP_DANCE_DOUBLE(KC_SCLN, KC_QUOT), + [TD_SLRO] = ACTION_TAP_DANCE_DOUBLE(KC_SLSH, KC_RO), +}; + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [_BASE] = LAYOUT_base( \ + //,--------------------------------------------------------------------------------------------------------------------. + KC_ESC, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_MINS,\ + //|--------+--------+--------+--------+--------+--------|--------+--------+--------+--------+--------+-----------------| + KC_TBSF, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCCL, KC_ENT,\ + //|--------+--------+--------+--------+--------+--------|--------+--------+--------+--------+--------+--------+--------| + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLRO, KC_UP, \ + //|--------+--------+--------+--------+--------+--------|--------+--------+--------+--------+--------+--------+--------| + KC_LCTRL, KC_LALT, KC_LGUI, LOWER, KC_BSPC, KC_SPC, RAISE, KC_ALAP, KC_LEFT, KC_DOWN, KC_RGHT,\ + //`-------------------------------------------------------------------------------------------------------------------' + KC_DEL \ + // ExtraKey: Split backspace key or it is below the enter key. + ), + + [_LOWER] = LAYOUT_base( \ + //,--------------------------------------------------------------------------------------------------------------------. + _____, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_MINS, KC_EQL, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL,\ + //|--------+--------+--------+--------+--------+--------|--------+--------+--------+--------+--------+-----------------| + _____, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, XXXXX, XXXXX, XXXXX, KC_SCLN, KC_QUOT, _____,\ + //|--------+--------+--------+--------+--------+--------|--------+--------+--------+--------+--------+--------+--------| + _____, KC_F11, KC_F12, XXXXX, KANJI, KC_ENT, XXXXX, XXXXX, KC_COMM, KC_DOT, KC_GRV, KC_PGUP, \ + //|--------+--------+--------+--------+--------+--------|--------+--------+--------+--------+--------+--------+--------| + _____, _____, _____, _____, KC_DEL, _____, _____, XXXXX, KC_HOME, KC_PGDN, KC_END,\ + //`-------------------------------------------------------------------------------------------------------------------' + XXXXX \ + // ExtraKey: Split backspace key or it is below the enter key. + ), + + [_RAISE] = LAYOUT_base( \ + //,--------------------------------------------------------------------------------------------------------------------. + _____, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, XXXXX,\ + //|--------+--------+--------+--------+--------+--------|--------+--------+--------+--------+--------+-----------------| + _____, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, KC_4, KC_5, KC_6, KC_QUOT, _____,\ + //|--------+--------+--------+--------+--------+--------|--------+--------+--------+--------+--------+--------+--------| + _____, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, KC_1, KC_2, KC_3, KC_RO, XXXXX, \ + //|--------+--------+--------+--------+--------+--------|--------+--------+--------+--------+--------+--------+--------| + _____, _____, _____, _____, _____, _____, _____, KC_0, KC_DOT, KC_COMM, KC_SLSH,\ + //`-------------------------------------------------------------------------------------------------------------------' + XXXXX \ + // ExtraKey: Split backspace key or it is below the enter key. + ), + + [_ADJUST] = LAYOUT_base( \ + //,--------------------------------------------------------------------------------------------------------------------. + XXXXX, RESET, RGBRST, AG_NORM, AG_SWAP, XXXXX, XXXXX, KC_WH_L, KC_WH_U, KC_HOME, KC_PGUP, XXXXX,\ + //|--------+--------+--------+--------+--------+--------|--------+--------+--------+--------+--------+-----------------| + XXXXX, RGB_TOG, RGB_HUI, RGB_SAI, RGB_VAI, XXXXX, XXXXX, KC_WH_R, KC_WH_D, KC_END, KC_PGDN, XXXXX,\ + //|--------+--------+--------+--------+--------+--------|--------+--------+--------+--------+--------+--------+--------| + _____, RGB_MOD, RGB_HUD, RGB_SAD, RGB_VAD, XXXXX, XXXXX, XXXXX, KC_BTN1, KC_BTN2, XXXXX, KC_MS_U, \ + //|--------+--------+--------+--------+--------+--------|--------+--------+--------+--------+--------+--------+--------| + _____, _____, _____, _____, XXXXX, XXXXX, _____, XXXXX, KC_MS_L, KC_MS_D, KC_MS_R,\ + //`-------------------------------------------------------------------------------------------------------------------' + XXXXX \ + // ExtraKey: Split backspace key or it is below the enter key. + ) +}; + +#define L_BASE _BASE +#define L_LOWER (1<<_LOWER) +#define L_RAISE (1<<_RAISE) +#define L_ADJUST (1<<_ADJUST) +#define L_ADJUST_TRI (L_ADJUST|L_RAISE|L_LOWER) + +#ifdef SSD1306OLED +typedef struct { + uint8_t state; + char name[8]; +}LAYER_DISPLAY_NAME; + +#define LAYER_DISPLAY_MAX 5 +const LAYER_DISPLAY_NAME layer_display_name[LAYER_DISPLAY_MAX] = { + {L_BASE, "Base"}, + {L_BASE + 1, "Base"}, + {L_LOWER, "Lower"}, + {L_RAISE, "Raise"}, + {L_ADJUST_TRI, "Adjust"} +}; + +static inline const char* get_leyer_status(void) { + + for (uint8_t i = 0; i < LAYER_DISPLAY_MAX; ++i) { + if (layer_state == 0 && layer_display_name[i].state == default_layer_state) { + + return layer_display_name[i].name; + } else if (layer_state != 0 && layer_display_name[i].state == layer_state) { + + return layer_display_name[i].name; + } + } + + return "?"; +} + +static char layer_status_buf[24] = "Layer state ready.\n"; +static inline void update_keymap_status(void) { + + snprintf(layer_status_buf, sizeof(layer_status_buf) - 1, "OS:%s Layer:%s\n", + keymap_config.swap_lalt_lgui? "win" : "mac", get_leyer_status()); +} + +static inline void render_keymap_status(struct CharacterMatrix *matrix) { + + matrix_write(matrix, layer_status_buf); +} + +#define UPDATE_KEYMAP_STATUS() update_keymap_status() +#define RENDER_KEYMAP_STATUS(a) render_keymap_status(a) + +#else + +#define UPDATE_KEYMAP_STATUS() +#define RENDER_KEYMAP_STATUS(a) + +#endif + +static inline void update_change_layer(bool pressed, uint8_t layer1, uint8_t layer2, uint8_t layer3) { + + pressed ? layer_on(layer1) : layer_off(layer1); + IS_LAYER_ON(layer1) && IS_LAYER_ON(layer2) ? layer_on(layer3) : layer_off(layer3); +} + +int RGB_current_mode; +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + + UPDATE_KEY_STATUS(keycode, record); + + bool result = false; + switch (keycode) { + case LOWER: + update_change_layer(record->event.pressed, _LOWER, _RAISE, _ADJUST); + break; + case RAISE: + update_change_layer(record->event.pressed, _RAISE, _LOWER, _ADJUST); + break; + case KANJI: + if (record->event.pressed) { + if (keymap_config.swap_lalt_lgui == false) { + register_code(KC_LANG2); + } else { + SEND_STRING(SS_LALT("`")); + } + } else { + unregister_code(KC_LANG2); + } + break; + #ifdef RGBLIGHT_ENABLE + case RGB_MOD: + if (record->event.pressed) { + rgblight_mode(RGB_current_mode); + rgblight_step(); + RGB_current_mode = rgblight_config.mode; + } + break; + case RGBRST: + if (record->event.pressed) { + eeconfig_update_rgblight_default(); + rgblight_enable(); + RGB_current_mode = rgblight_config.mode; + } + break; + #endif + default: + result = true; + break; + } + + UPDATE_KEYMAP_STATUS(); + return result; +} + +void matrix_init_user(void) { + #ifdef RGBLIGHT_ENABLE + RGB_current_mode = rgblight_config.mode; + #endif + //SSD1306 OLED init, make sure to add #define SSD1306OLED in config.h + #ifdef SSD1306OLED + iota_gfx_init(!has_usb()); // turns on the display + #endif +} + +//SSD1306 OLED update loop, make sure to add #define SSD1306OLED in config.h +#ifdef SSD1306OLED + +void matrix_scan_user(void) { + iota_gfx_task(); // this is what updates the display continuously +} + +static inline void matrix_update(struct CharacterMatrix *dest, + const struct CharacterMatrix *source) { + if (memcmp(dest->display, source->display, sizeof(dest->display))) { + memcpy(dest->display, source->display, sizeof(dest->display)); + dest->dirty = true; + } +} + +static inline void render_status(struct CharacterMatrix *matrix) { + + UPDATE_LED_STATUS(); + RENDER_LED_STATUS(matrix); + RENDER_KEYMAP_STATUS(matrix); + UPDATE_LOCK_STATUS(); + RENDER_LOCK_STATUS(matrix); + RENDER_KEY_STATUS(matrix); +} + +void iota_gfx_task_user(void) { + struct CharacterMatrix matrix; + + #if DEBUG_TO_SCREEN + if (debug_enable) { + return; + } + #endif + + matrix_clear(&matrix); + if (is_master) { + render_status(&matrix); + } + + matrix_update(&display, &matrix); +} + +#endif diff --git a/keyboards/treadstone48/keymaps/default/readme.md b/keyboards/treadstone48/keymaps/default/readme.md new file mode 100644 index 00000000000..bb835d169c1 --- /dev/null +++ b/keyboards/treadstone48/keymaps/default/readme.md @@ -0,0 +1,5 @@ +# Default keymap for treadstone48 + +## Description + +## How to use diff --git a/keyboards/treadstone48/keymaps/default/readme_jp.md b/keyboards/treadstone48/keymaps/default/readme_jp.md new file mode 100644 index 00000000000..6043c93cbce --- /dev/null +++ b/keyboards/treadstone48/keymaps/default/readme_jp.md @@ -0,0 +1,80 @@ +# US配列ライクデフォルトキーマップ + +## 概要 + +　US配列ライクなデフォルトキーマップです。 + +## キーマップの見かた + +qmk_firmware\tmk_core\common\keycode.h +に基本的なキーコードがあります。また、Keymap.cの上部にカスタムしたKC_で始まるものを登録しています。 +キーマップに書くときは「KC_」を省略して書いています。 +例：KC_A → A + +Leyer Tap、Mod Tap、Tap DanceというQMKの機能を使っています。 + +Layer Tapはタップで指定したキー、長押しで指定したレイヤーに移動します。 +例：LT(RAISE, KC_V) → タップでV、長押しでRAISEレイヤー移動 + +Mod Tapはタップで視程したキー、長押しで視程したレイヤーに移動します。 +例：LSFT_T(KC_Z) → タップでZ、長押しで左シフト + +Tap Danceは指定した二つのキーをシングルタップ、ダブルタップで切り替えられます。 +例：[TD_CODO] = ACTION_TAP_DANCE_DOUBLE(KC_COMM, KC_DOT) → シングルタップでCOMM、ダブルタップでDOT + +もう少し詳しい内容についてはQMK Documentをお読みいただくかネットを検索すれば情報が載っていますので別途検索してみてください。 + +## 機能 + +　QWERTYキーマップをベースにしていて、LowerレイヤーとRaiseレイヤーに他のキーを配置しています。 +　LowerとRaiseを同時押しでAdjustレイヤーを使うことが出来ます。 +　DOTの横、SLROと書いてあるのはシングルタップで/記号、ダブルタップで\記号が入力出来るようになっています。 +　Lの横、SCCLと書いてあるのはシングルタップで;記号、ダブルタップで:記号が入力出来るようになっています。 +　マウスキーの割り当てがありますので、もし使用したい場合はrules.mkでMOUSEKEY_ENABLE = yesにしてmakeすると使用することができます。 + +## 48キー目について + +　このキーボードはEnterキーの上の2Uキーを1Ux2個にして使用する事が出来るようになっています。 使用する場合はキーマップの書き換えが必要です。 + +　各レイヤーの最下段の + +```c + XXXXX \ + // ExtraKey: Split backspace key or it is below the enter key. +``` + +　のXXXXXに任意のキーを入れることでPの右隣のキーとして動作するようになっています。その右隣りに従来のキーが配置されています。 + +## OS切り替え方法 + +　Adjustレイヤーにあります。LowerとRaiseを同時押しでAdjustレイヤーを使うことが出来ます。 + +- KNRM: QMKのノーマル状態です。macだと正常に使える（はず）です +- KSWP: ノーマル状態のままWindowsで使用するとALTキーとGUI（win）キーが逆ですので、それを入れ換えます。Windowsユーザーはこちらのモードにしてください + +## NUMPADモードについて + +　Lower + DLNPキーを一度押下するとNumpadモードになります。通常モードに戻す場合はDLBSキーを押下してください。 + +## IME切り替え方法 + +　Winの場合、LowerレイヤーにKANJIキー（半角/全角　漢字）がありますので、Lower+KANJIで切り替えてください。 + +## ソフトウェアリセットについて + +　キーボードにはハードウェアのリセットボタンが付いていますが、ソフトウェアリセットをかけられます。 +　LowerとRaiseを同時押しでAdjustレイヤーを使うことが出来、AdjustレイヤーのRESETを押下するとリセットがかかります。 + +## LEDの点灯切り替え方法 + +　Adjustレイヤーにあります。LowerとRaiseを同時押しでAdjustレイヤーを使うことが出来ます。 + +- RGBRST: LEDのリセット +- RGB_TOG: LEDのON/OFF切り替え +- RGB_MOD: LEDの光り方の変更 +- RGB_HUI: Hue+ 色合いを変更 +- RGB_HUD: Hue- 色合いを変更 +- RGB_SAI: Saturation+ 色の濃さを変更 +- RGB_SAD: Saturation- 色の濃さを変更 +- RGB_VAI: Value+ 明るさを変更 +- RGB_VAD: Value- 明るさを変更 diff --git a/keyboards/treadstone48/keymaps/default/rules.mk b/keyboards/treadstone48/keymaps/default/rules.mk new file mode 100644 index 00000000000..c53226431d3 --- /dev/null +++ b/keyboards/treadstone48/keymaps/default/rules.mk @@ -0,0 +1,67 @@ + +# Build Options +# change to "no" to disable the options, or define them in the Makefile in +# the appropriate keymap folder that will get included automatically +# +BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = no # Mouse keys(+4700) +EXTRAKEY_ENABLE = no # Audio control and System control(+450) +CONSOLE_ENABLE = no # Console for debug(+400) +COMMAND_ENABLE = no # Commands for debug and configuration +NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +MIDI_ENABLE = no # MIDI controls +AUDIO_ENABLE = no # Audio output on port C6 +UNICODE_ENABLE = no # Unicode +BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID +RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. +SWAP_HANDS_ENABLE = no # Enable one-hand typing +TAP_DANCE_ENABLE = yes + +# If your custom treadstone48 pcb, you can rewrite to yes. +OLED_ENABLE = no # OLED_ENABLE +LED_UNDERGLOW_ENABLE = yes # LED underglow (Enable WS2812 RGB underlight.) +LED_ANIMATIONS = yes # LED animations + +# Other selectable option +IOS_DEVICE_ENABLE = no # connect to IOS device (iPad,iPhone) +LOCAL_GLCDFONT = no # use each keymaps "font.h" insted of "common/glcdfont.c" +# RHYMESTONE_RIGHTHAND = no # If connect right hand side of the Rhymestone, set to yes. +ANGELINA_KEYMAP = no # If Alfa verstion use set to yes. + +ifeq ($(strip $(OLED_ENABLE)), yes) + OPT_DEFS += -DOLED_ENABLE +endif + +ifeq ($(strip $(LED_UNDERGLOW_ENABLE)), yes) + RGBLIGHT_ENABLE = yes +else + RGBLIGHT_ENABLE = no +endif + +ifeq ($(strip $(LED_ANIMATIONS)), yes) + # OPT_DEFS += -DRGBLIGHT_ANIMATIONS + OPT_DEFS += -DLED_ANIMATIONS +endif + +ifeq ($(strip $(IOS_DEVICE_ENABLE)), yes) + OPT_DEFS += -DIOS_DEVICE_ENABLE +endif + +ifeq ($(strip $(LOCAL_GLCDFONT)), yes) + OPT_DEFS += -DLOCAL_GLCDFONT +endif + +# ifeq ($(strip $(RHYMESTONE_RIGHTHAND)), yes) +# OPT_DEFS += -DRHYMESTONE_RIGHTHAND +# endif + +ifeq ($(strip $(ANGELINA_KEYMAP)), yes) + OPT_DEFS += -DANGELINA_KEYMAP +endif + +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend + +# If you want to change the display of OLED, you need to change here +SRC += ./common/oled_helper.c \ diff --git a/keyboards/treadstone48/keymaps/like_jis/config.h b/keyboards/treadstone48/keymaps/like_jis/config.h new file mode 100644 index 00000000000..3f63a0cfbbd --- /dev/null +++ b/keyboards/treadstone48/keymaps/like_jis/config.h @@ -0,0 +1,60 @@ +/* +This is the c configuration file for the keymap + +Copyright 2012 Jun Wako +Copyright 2015 Jack Humbert + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#pragma once + +// place overrides here + +#ifdef TAPPING_TERM +#undef TAPPING_TERM +#endif +#define TAPPING_TERM 225 +// #define PREVENT_STUCK_MODIFIERS +// #define IGNORE_MOD_TAP_INTERRUPT + +#ifdef MOUSEKEY_ENABLE + #undef MOUSEKEY_INTERVAL + #define MOUSEKEY_INTERVAL 1 + + #undef MOUSEKEY_TIME_TO_MAX + #define MOUSEKEY_TIME_TO_MAX 150 + + #undef MOUSEKEY_MAX_SPEED + #define MOUSEKEY_MAX_SPEED 3 + + #undef MOUSEKEY_MOVE_DELTA + #define MOUSEKEY_MOVE_DELTA 4 + + #undef MOUSEKEY_DELAY + #define MOUSEKEY_DELAY 0 +#endif + +// Selection of RGBLIGHT MODE to use. +#if defined(LED_ANIMATIONS) + //#define RGBLIGHT_EFFECT_BREATHING + #define RGBLIGHT_EFFECT_RAINBOW_MOOD + #define RGBLIGHT_EFFECT_RAINBOW_SWIRL + //#define RGBLIGHT_EFFECT_SNAKE + #define RGBLIGHT_EFFECT_KNIGHT + //#define RGBLIGHT_EFFECT_CHRISTMAS + #define RGBLIGHT_EFFECT_STATIC_GRADIENT + //#define RGBLIGHT_EFFECT_RGB_TEST + //#define RGBLIGHT_EFFECT_ALTERNATING +#endif diff --git a/keyboards/treadstone48/keymaps/like_jis/keymap.c b/keyboards/treadstone48/keymaps/like_jis/keymap.c new file mode 100644 index 00000000000..b63b0c9f495 --- /dev/null +++ b/keyboards/treadstone48/keymaps/like_jis/keymap.c @@ -0,0 +1,278 @@ +#include QMK_KEYBOARD_H +#include "keymap_jp.h" +#include "../common/oled_helper.h" + +extern keymap_config_t keymap_config; + +#ifdef RGBLIGHT_ENABLE +//Following line allows macro to read current RGB settings +extern rgblight_config_t rgblight_config; +#endif + +extern uint8_t is_master; + +// Each layer gets a name for readability, which is then used in the keymap matrix below. +// The underscores don't mean anything - you can have a layer called STUFF or any other name. +// Layer names don't all need to be of the same length, obviously, and you can also skip them +// entirely and just use numbers. +enum layer_number { + _BASE = 0, + _LOWER, + _RAISE, + _ADJUST, +}; + +enum custom_keycodes { + LOWER = SAFE_RANGE, + RAISE, + ADJUST, + KANJI, + RGBRST +}; + +enum tapdances{ + TD_SCCL = 0, + TD_SLRO, +}; + +// Layer Mode aliases +#define _____ KC_TRNS +#define XXXXX KC_NO + +#define KC_TBSF LSFT_T(KC_TAB) +// #define KC_SPSF LSFT_T(KC_SPC) +#define KC_ALAP LALT_T(KC_APP) +#define KC_JEQL LSFT(KC_MINS) + +#define KC_SCCL TD(TD_SCCL) +#define KC_SLRO TD(TD_SLRO) + +qk_tap_dance_action_t tap_dance_actions[] = { + [TD_SCCL] = ACTION_TAP_DANCE_DOUBLE(KC_SCLN, KC_QUOT), + [TD_SLRO] = ACTION_TAP_DANCE_DOUBLE(KC_SLSH, KC_RO), +}; + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [_BASE] = LAYOUT_base( \ + //,--------------------------------------------------------------------------------------------------------------------. + KC_ESC, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_MINS,\ + //|--------+--------+--------+--------+--------+--------|--------+--------+--------+--------+--------+-----------------| + KC_TBSF, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCCL, KC_ENT,\ + //|--------+--------+--------+--------+--------+--------|--------+--------+--------+--------+--------+--------+--------| + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLRO, KC_UP, \ + //|--------+--------+--------+--------+--------+--------|--------+--------+--------+--------+--------+--------+--------| + KC_LCTRL, KC_LALT, KC_LGUI, LOWER, KC_BSPC, KC_SPC, RAISE, KC_ALAP, KC_LEFT, KC_DOWN, KC_RGHT,\ + //`-------------------------------------------------------------------------------------------------------------------' + KC_DEL \ + // ExtraKey: Split backspace key or it is below the enter key. + ), + + [_LOWER] = LAYOUT_base( \ + //,--------------------------------------------------------------------------------------------------------------------. + _____, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_MINS, KC_EQL, KC_JYEN, KC_LBRC, KC_RBRC, KC_DEL,\ + //|--------+--------+--------+--------+--------+--------|--------+--------+--------+--------+--------+-----------------| + _____, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, XXXXX, XXXXX, KC_SCLN, KC_QUOT, KC_BSLS, _____,\ + //|--------+--------+--------+--------+--------+--------|--------+--------+--------+--------+--------+--------+--------| + _____, KC_F11, KC_F12, XXXXX, KANJI, KC_ENT, XXXXX, KC_COMM, KC_DOT, KC_SLSH, KC_RO, KC_PGUP, \ + //|--------+--------+--------+--------+--------+--------|--------+--------+--------+--------+--------+--------+--------| + _____, _____, _____, _____, KC_DEL, _____, _____, XXXXX, KC_HOME, KC_PGDN, KC_END,\ + //`-------------------------------------------------------------------------------------------------------------------' + XXXXX \ + // ExtraKey: Split backspace key or it is below the enter key. + ), + + [_RAISE] = LAYOUT_base( \ + //,--------------------------------------------------------------------------------------------------------------------. + _____, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, XXXXX,\ + //|--------+--------+--------+--------+--------+--------|--------+--------+--------+--------+--------+-----------------| + _____, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, KC_4, KC_5, KC_6, KC_QUOT, _____,\ + //|--------+--------+--------+--------+--------+--------|--------+--------+--------+--------+--------+--------+--------| + _____, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, KC_1, KC_2, KC_3, KC_RO, XXXXX, \ + //|--------+--------+--------+--------+--------+--------|--------+--------+--------+--------+--------+--------+--------| + _____, _____, _____, _____, _____, _____, _____, KC_0, KC_DOT, KC_COMM, KC_SLSH,\ + //`-------------------------------------------------------------------------------------------------------------------' + XXXXX \ + // ExtraKey: Split backspace key or it is below the enter key. + ), + + [_ADJUST] = LAYOUT_base( \ + //,--------------------------------------------------------------------------------------------------------------------. + XXXXX, RESET, RGBRST, AG_NORM, AG_SWAP, XXXXX, XXXXX, KC_WH_L, KC_WH_U, KC_HOME, KC_PGUP, XXXXX,\ + //|--------+--------+--------+--------+--------+--------|--------+--------+--------+--------+--------+-----------------| + XXXXX, RGB_TOG, RGB_HUI, RGB_SAI, RGB_VAI, XXXXX, XXXXX, KC_WH_R, KC_WH_D, KC_END, KC_PGDN, XXXXX,\ + //|--------+--------+--------+--------+--------+--------|--------+--------+--------+--------+--------+--------+--------| + _____, RGB_MOD, RGB_HUD, RGB_SAD, RGB_VAD, XXXXX, XXXXX, XXXXX, KC_BTN1, KC_BTN2, XXXXX, KC_MS_U, \ + //|--------+--------+--------+--------+--------+--------|--------+--------+--------+--------+--------+--------+--------| + _____, _____, _____, _____, XXXXX, XXXXX, _____, XXXXX, KC_MS_L, KC_MS_D, KC_MS_R,\ + //`-------------------------------------------------------------------------------------------------------------------' + XXXXX \ + // ExtraKey: Split backspace key or it is below the enter key. + ) +}; + +#define L_BASE _BASE +#define L_LOWER (1<<_LOWER) +#define L_RAISE (1<<_RAISE) +#define L_ADJUST (1<<_ADJUST) +#define L_ADJUST_TRI (L_ADJUST|L_RAISE|L_LOWER) + +#ifdef SSD1306OLED +typedef struct { + uint8_t state; + char name[8]; +}LAYER_DISPLAY_NAME; + +#define LAYER_DISPLAY_MAX 5 +const LAYER_DISPLAY_NAME layer_display_name[LAYER_DISPLAY_MAX] = { + {L_BASE, "Base"}, + {L_BASE + 1, "Base"}, + {L_LOWER, "Lower"}, + {L_RAISE, "Raise"}, + {L_ADJUST_TRI, "Adjust"} +}; + +static inline const char* get_leyer_status(void) { + + for (uint8_t i = 0; i < LAYER_DISPLAY_MAX; ++i) { + if (layer_state == 0 && layer_display_name[i].state == default_layer_state) { + + return layer_display_name[i].name; + } else if (layer_state != 0 && layer_display_name[i].state == layer_state) { + + return layer_display_name[i].name; + } + } + + return "?"; +} + +static char layer_status_buf[24] = "Layer state ready.\n"; +static inline void update_keymap_status(void) { + + snprintf(layer_status_buf, sizeof(layer_status_buf) - 1, "OS:%s Layer:%s\n", + keymap_config.swap_lalt_lgui? "win" : "mac", get_leyer_status()); +} + +static inline void render_keymap_status(struct CharacterMatrix *matrix) { + + matrix_write(matrix, layer_status_buf); +} + +#define UPDATE_KEYMAP_STATUS() update_keymap_status() +#define RENDER_KEYMAP_STATUS(a) render_keymap_status(a) + +#else + +#define UPDATE_KEYMAP_STATUS() +#define RENDER_KEYMAP_STATUS(a) + +#endif + +static inline void update_change_layer(bool pressed, uint8_t layer1, uint8_t layer2, uint8_t layer3) { + + pressed ? layer_on(layer1) : layer_off(layer1); + IS_LAYER_ON(layer1) && IS_LAYER_ON(layer2) ? layer_on(layer3) : layer_off(layer3); +} + +int RGB_current_mode; +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + + UPDATE_KEY_STATUS(keycode, record); + + bool result = false; + switch (keycode) { + case LOWER: + update_change_layer(record->event.pressed, _LOWER, _RAISE, _ADJUST); + break; + case RAISE: + update_change_layer(record->event.pressed, _RAISE, _LOWER, _ADJUST); + break; + case KANJI: + if (record->event.pressed) { + if (keymap_config.swap_lalt_lgui == false) { + register_code(KC_LANG2); + } else { + SEND_STRING(SS_LALT("`")); + } + } else { + unregister_code(KC_LANG2); + } + break; + #ifdef RGBLIGHT_ENABLE + case RGB_MOD: + if (record->event.pressed) { + rgblight_mode(RGB_current_mode); + rgblight_step(); + RGB_current_mode = rgblight_config.mode; + } + break; + case RGBRST: + if (record->event.pressed) { + eeconfig_update_rgblight_default(); + rgblight_enable(); + RGB_current_mode = rgblight_config.mode; + } + break; + #endif + default: + result = true; + break; + } + + UPDATE_KEYMAP_STATUS(); + return result; +} + +void matrix_init_user(void) { + #ifdef RGBLIGHT_ENABLE + RGB_current_mode = rgblight_config.mode; + #endif + //SSD1306 OLED init, make sure to add #define SSD1306OLED in config.h + #ifdef SSD1306OLED + iota_gfx_init(!has_usb()); // turns on the display + #endif +} + +//SSD1306 OLED update loop, make sure to add #define SSD1306OLED in config.h +#ifdef SSD1306OLED + +void matrix_scan_user(void) { + iota_gfx_task(); // this is what updates the display continuously +} + +static inline void matrix_update(struct CharacterMatrix *dest, + const struct CharacterMatrix *source) { + if (memcmp(dest->display, source->display, sizeof(dest->display))) { + memcpy(dest->display, source->display, sizeof(dest->display)); + dest->dirty = true; + } +} + +static inline void render_status(struct CharacterMatrix *matrix) { + + UPDATE_LED_STATUS(); + RENDER_LED_STATUS(matrix); + RENDER_KEYMAP_STATUS(matrix); + UPDATE_LOCK_STATUS(); + RENDER_LOCK_STATUS(matrix); + RENDER_KEY_STATUS(matrix); +} + +void iota_gfx_task_user(void) { + struct CharacterMatrix matrix; + + #if DEBUG_TO_SCREEN + if (debug_enable) { + return; + } + #endif + + matrix_clear(&matrix); + if (is_master) { + render_status(&matrix); + } + + matrix_update(&display, &matrix); +} + +#endif diff --git a/keyboards/treadstone48/keymaps/like_jis/readme.md b/keyboards/treadstone48/keymaps/like_jis/readme.md new file mode 100644 index 00000000000..796df6c4cd7 --- /dev/null +++ b/keyboards/treadstone48/keymaps/like_jis/readme.md @@ -0,0 +1,5 @@ +# The like jis type keyboard keymap for treadstone48 + +## Description + +## How to use diff --git a/keyboards/treadstone48/keymaps/like_jis/readme_jp.md b/keyboards/treadstone48/keymaps/like_jis/readme_jp.md new file mode 100644 index 00000000000..305ded471da --- /dev/null +++ b/keyboards/treadstone48/keymaps/like_jis/readme_jp.md @@ -0,0 +1,80 @@ +# JISキーボードライクなキーマップ + +## 概要 + +　デフォルトキーマップの記号類をJISライクな配置に揃えなおしたものです。 + +## キーマップの見かた + +qmk_firmware\tmk_core\common\keycode.h +に基本的なキーコードがあります。また、Keymap.cの上部にカスタムしたKC_で始まるものを登録しています。 +キーマップに書くときは「KC_」を省略して書いています。 +例：KC_A → A + +Leyer Tap、Mod Tap、Tap DanceというQMKの機能を使っています。 + +Layer Tapはタップで指定したキー、長押しで指定したレイヤーに移動します。 +例：LT(RAISE, KC_V) → タップでV、長押しでRAISEレイヤー移動 + +Mod Tapはタップで視程したキー、長押しで視程したレイヤーに移動します。 +例：LSFT_T(KC_Z) → タップでZ、長押しで左シフト + +Tap Danceは指定した二つのキーをシングルタップ、ダブルタップで切り替えられます。 +例：[TD_CODO] = ACTION_TAP_DANCE_DOUBLE(KC_COMM, KC_DOT) → シングルタップでCOMM、ダブルタップでDOT + +もう少し詳しい内容についてはQMK Documentをお読みいただくかネットを検索すれば情報が載っていますので別途検索してみてください。 + +## 機能 + +　QWERTYキーマップをベースにしていて、LowerレイヤーとRaiseレイヤーに他のキーを配置しています。 +　LowerとRaiseを同時押しでAdjustレイヤーを使うことが出来ます。 +　DOTの横、SLROと書いてあるのはシングルタップで/記号、ダブルタップで\記号が入力出来るようになっています。 +　Lの横、SCCLと書いてあるのはシングルタップで;記号、ダブルタップで:記号が入力出来るようになっています。 +　マウスキーの割り当てがありますので、もし使用したい場合はrules.mkでMOUSEKEY_ENABLE = yesにしてmakeすると使用することができます。 + +## 48キー目について + +　このキーボードはEnterキーの上の2Uキーを1Ux2個にして使用する事が出来るようになっています。 使用する場合はキーマップの書き換えが必要です。 + +　各レイヤーの最下段の + +```c + XXXXX \ + // ExtraKey: Split backspace key or it is below the enter key. +``` + +　のXXXXXに任意のキーを入れることでPの右隣のキーとして動作するようになっています。その右隣りに従来のキーが配置されています。 + +## OS切り替え方法 + +　Adjustレイヤーにあります。LowerとRaiseを同時押しでAdjustレイヤーを使うことが出来ます。 + +- KNRM: QMKのノーマル状態です。macだと正常に使える（はず）です +- KSWP: ノーマル状態のままWindowsで使用するとALTキーとGUI（win）キーが逆ですので、それを入れ換えます。Windowsユーザーはこちらのモードにしてください + +## NUMPADモードについて + +　Lower + DLNPキーを一度押下するとNumpadモードになります。通常モードに戻す場合はDLBSキーを押下してください。 + +## IME切り替え方法 + +　Winの場合、LowerレイヤーにKANJIキー（半角/全角　漢字）がありますので、Lower+KANJIで切り替えてください。 + +## ソフトウェアリセットについて + +　キーボードにはハードウェアのリセットボタンが付いていますが、ソフトウェアリセットをかけられます。 +　LowerとRaiseを同時押しでAdjustレイヤーを使うことが出来、AdjustレイヤーのRSTを押下するとリセットがかかります。 + +## LEDの点灯切り替え方法 + +　Adjustレイヤーにあります。LowerとRaiseを同時押しでAdjustレイヤーを使うことが出来ます。 + +- RGBRST: LEDのリセット +- RGB_TOG: LEDのON/OFF切り替え +- RGB_MOD: LEDの光り方の変更 +- RGB_HUI: Hue+ 色合いを変更 +- RGB_HUD: Hue- 色合いを変更 +- RGB_SAI: Saturation+ 色の濃さを変更 +- RGB_SAD: Saturation- 色の濃さを変更 +- RGB_VAI: Value+ 明るさを変更 +- RGB_VAD: Value- 明るさを変更 diff --git a/keyboards/treadstone48/keymaps/like_jis/rules.mk b/keyboards/treadstone48/keymaps/like_jis/rules.mk new file mode 100644 index 00000000000..c53226431d3 --- /dev/null +++ b/keyboards/treadstone48/keymaps/like_jis/rules.mk @@ -0,0 +1,67 @@ + +# Build Options +# change to "no" to disable the options, or define them in the Makefile in +# the appropriate keymap folder that will get included automatically +# +BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = no # Mouse keys(+4700) +EXTRAKEY_ENABLE = no # Audio control and System control(+450) +CONSOLE_ENABLE = no # Console for debug(+400) +COMMAND_ENABLE = no # Commands for debug and configuration +NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +MIDI_ENABLE = no # MIDI controls +AUDIO_ENABLE = no # Audio output on port C6 +UNICODE_ENABLE = no # Unicode +BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID +RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. +SWAP_HANDS_ENABLE = no # Enable one-hand typing +TAP_DANCE_ENABLE = yes + +# If your custom treadstone48 pcb, you can rewrite to yes. +OLED_ENABLE = no # OLED_ENABLE +LED_UNDERGLOW_ENABLE = yes # LED underglow (Enable WS2812 RGB underlight.) +LED_ANIMATIONS = yes # LED animations + +# Other selectable option +IOS_DEVICE_ENABLE = no # connect to IOS device (iPad,iPhone) +LOCAL_GLCDFONT = no # use each keymaps "font.h" insted of "common/glcdfont.c" +# RHYMESTONE_RIGHTHAND = no # If connect right hand side of the Rhymestone, set to yes. +ANGELINA_KEYMAP = no # If Alfa verstion use set to yes. + +ifeq ($(strip $(OLED_ENABLE)), yes) + OPT_DEFS += -DOLED_ENABLE +endif + +ifeq ($(strip $(LED_UNDERGLOW_ENABLE)), yes) + RGBLIGHT_ENABLE = yes +else + RGBLIGHT_ENABLE = no +endif + +ifeq ($(strip $(LED_ANIMATIONS)), yes) + # OPT_DEFS += -DRGBLIGHT_ANIMATIONS + OPT_DEFS += -DLED_ANIMATIONS +endif + +ifeq ($(strip $(IOS_DEVICE_ENABLE)), yes) + OPT_DEFS += -DIOS_DEVICE_ENABLE +endif + +ifeq ($(strip $(LOCAL_GLCDFONT)), yes) + OPT_DEFS += -DLOCAL_GLCDFONT +endif + +# ifeq ($(strip $(RHYMESTONE_RIGHTHAND)), yes) +# OPT_DEFS += -DRHYMESTONE_RIGHTHAND +# endif + +ifeq ($(strip $(ANGELINA_KEYMAP)), yes) + OPT_DEFS += -DANGELINA_KEYMAP +endif + +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend + +# If you want to change the display of OLED, you need to change here +SRC += ./common/oled_helper.c \ diff --git a/keyboards/treadstone48/keymaps/like_jis_rs/config.h b/keyboards/treadstone48/keymaps/like_jis_rs/config.h new file mode 100644 index 00000000000..e8acd5c76d4 --- /dev/null +++ b/keyboards/treadstone48/keymaps/like_jis_rs/config.h @@ -0,0 +1,60 @@ +/* +This is the c configuration file for the keymap + +Copyright 2012 Jun Wako +Copyright 2015 Jack Humbert + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#pragma once + +// place overrides here + +#ifdef TAPPING_TERM +#undef TAPPING_TERM +#endif +#define TAPPING_TERM 225 +#define PREVENT_STUCK_MODIFIERS +#define IGNORE_MOD_TAP_INTERRUPT + +#ifdef MOUSEKEY_ENABLE + #undef MOUSEKEY_INTERVAL + #define MOUSEKEY_INTERVAL 1 + + #undef MOUSEKEY_TIME_TO_MAX + #define MOUSEKEY_TIME_TO_MAX 150 + + #undef MOUSEKEY_MAX_SPEED + #define MOUSEKEY_MAX_SPEED 3 + + #undef MOUSEKEY_MOVE_DELTA + #define MOUSEKEY_MOVE_DELTA 4 + + #undef MOUSEKEY_DELAY + #define MOUSEKEY_DELAY 0 +#endif + +// Selection of RGBLIGHT MODE to use. +#if defined(LED_ANIMATIONS) + //#define RGBLIGHT_EFFECT_BREATHING + #define RGBLIGHT_EFFECT_RAINBOW_MOOD + #define RGBLIGHT_EFFECT_RAINBOW_SWIRL + //#define RGBLIGHT_EFFECT_SNAKE + #define RGBLIGHT_EFFECT_KNIGHT + //#define RGBLIGHT_EFFECT_CHRISTMAS + #define RGBLIGHT_EFFECT_STATIC_GRADIENT + //#define RGBLIGHT_EFFECT_RGB_TEST + //#define RGBLIGHT_EFFECT_ALTERNATING +#endif diff --git a/keyboards/treadstone48/keymaps/like_jis_rs/keymap.c b/keyboards/treadstone48/keymaps/like_jis_rs/keymap.c new file mode 100644 index 00000000000..0e4ec063ccb --- /dev/null +++ b/keyboards/treadstone48/keymaps/like_jis_rs/keymap.c @@ -0,0 +1,342 @@ +#include QMK_KEYBOARD_H +#include "keymap_jp.h" +#include "../common/oled_helper.h" + +extern keymap_config_t keymap_config; + +#ifdef RGBLIGHT_ENABLE +//Following line allows macro to read current RGB settings +extern rgblight_config_t rgblight_config; +#endif + +extern uint8_t is_master; + +// Each layer gets a name for readability, which is then used in the keymap matrix below. +// The underscores don't mean anything - you can have a layer called STUFF or any other name. +// Layer names don't all need to be of the same length, obviously, and you can also skip them +// entirely and just use numbers. +enum layer_number { + _BASE = 0, + _BASES, + _LOWER, + _LOWRS, + _RAISE, + _ADJUST, +}; + +enum custom_keycodes { + BASE = SAFE_RANGE, + BASES, + LOWER, + LOWRS, + RAISE, + ADJUST, + KANJI, + RGBRST +}; + +enum tapdances{ + TD_SCCL = 0, + TD_SLRO, +}; + +// Layer Mode aliases +#define _____ KC_TRNS +#define XXXXX KC_NO + +#define KC_TBSF LSFT_T(KC_TAB) +// #define KC_SPSF LSFT_T(KC_SPC) +#define KC_ALAP LALT_T(KC_APP) +#define KC_JEQL LSFT(KC_MINS) +#define KC_SFUC LSFT(KC_RO) +#define KC_RSBR LSFT(KC_8) +#define KC_REBR LSFT(KC_9) + +#define KC_ZSFT LSFT_T(KC_Z) +#define KC_ESCT LCTL_T(KC_ESC) +#define KC_TBAL LALT_T(KC_TAB) +#define KC_11SF LSFT_T(KC_F11) + +#define KC_SCCL TD(TD_SCCL) +#define KC_SLRO TD(TD_SLRO) + +qk_tap_dance_action_t tap_dance_actions[] = { + [TD_SCCL] = ACTION_TAP_DANCE_DOUBLE(KC_SCLN, KC_QUOT), + [TD_SLRO] = ACTION_TAP_DANCE_DOUBLE(KC_SLSH, KC_RO), +}; + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [_BASE] = LAYOUT_rs( \ + // Treadstone48 Rhymestone + //,--------------------------------------------------------------------------------------------------------------------. --------------------------------------------. + KC_ESC, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_MINS, KC_P7, KC_P8, KC_P9, KC_PSLS, KC_NLCK,\ + //|--------+--------+--------+--------+--------+--------|--------+--------+--------+--------+--------+-----------------| --------+--------+--------+--------+--------| + KC_TBSF, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCCL, KC_ENT, KC_P4, KC_P5, KC_P6, KC_PAST, KC_TAB,\ + //|--------+--------+--------+--------+--------+--------|--------+--------+--------+--------+--------+--------+--------| --------+--------+--------+--------+--------| + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLRO, KC_UP, KC_P1, KC_P2, KC_P3, KC_PMNS, KC_PENT,\ + //|--------+--------+--------+--------+--------+--------|--------+--------+--------+--------+--------+--------+--------| --------+--------+--------+--------+--------| + KC_LCTRL, KC_LALT, KC_LGUI, LOWER, KC_BSPC, KC_SPC, RAISE, KC_ALAP, KC_LEFT, KC_DOWN, KC_RGHT, LOWER, KC_P0, KC_PDOT, KC_PPLS, KC_BSPC,\ + //`--------------------------------------------------------------------------------------------------------------------' --------------------------------------------' + KC_DEL \ + // ExtraKey: Split backspace key or it is below the enter key. + ), + + [_LOWER] = LAYOUT_rs( \ + // Treadstone48 Rhymestone + //,--------------------------------------------------------------------------------------------------------------------. --------------------------------------------. + _____, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_MINS, KC_EQL, KC_JYEN, KC_LBRC, KC_RBRC, KC_DEL, KC_A, KC_B, KC_C, KC_JYEN, KC_HASH,\ + //|--------+--------+--------+--------+--------+--------|--------+--------+--------+--------+--------+-----------------| --------+--------+--------+--------+--------| + _____, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, XXXXX, XXXXX, KC_SCLN, KC_QUOT, KC_BSLS, _____, KC_D, KC_E, KC_F, KC_PERC, KC_SFUC,\ + //|--------+--------+--------+--------+--------+--------|--------+--------+--------+--------+--------+--------+--------| --------+--------+--------+--------+--------| + _____, KC_F11, KC_F12, BASES, KANJI, KC_ENT, XXXXX, KC_COMM, KC_DOT, KC_SLSH, KC_RO, KC_PGUP, KC_RSBR, KC_REBR, KC_RBRC, KC_QUOT, _____,\ + //|--------+--------+--------+--------+--------+--------|--------+--------+--------+--------+--------+--------+--------| --------+--------+--------+--------+--------| + _____, _____, _____, _____, KC_DEL, _____, _____, XXXXX, KC_HOME, KC_PGDN, KC_END, _____, XXXXX, KC_COMM, KC_JEQL, KC_DEL,\ + //`--------------------------------------------------------------------------------------------------------------------' --------------------------------------------' + XXXXX \ + // ExtraKey: Split backspace key or it is below the enter key. + ), + + [_BASES] = LAYOUT_rs( \ + // Treadstone48 Rhymestone + //,--------------------------------------------------------------------------------------------------------------------. --------------------------------------------. + KC_ESC, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_MINS, KC_Q, KC_W, KC_E, KC_R, KC_T,\ + //|--------+--------+--------+--------+--------+--------|--------+--------+--------+--------+--------+-----------------| --------+--------+--------+--------+--------| + KC_TBSF, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCCL, KC_ENT, KC_A, KC_S, KC_D, KC_F, KC_G,\ + //|--------+--------+--------+--------+--------+--------|--------+--------+--------+--------+--------+--------+--------| --------+--------+--------+--------+--------| + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLRO, KC_UP, KC_ZSFT, KC_X, KC_C, KC_V, KC_B,\ + //|--------+--------+--------+--------+--------+--------|--------+--------+--------+--------+--------+--------+--------| --------+--------+--------+--------+--------| + KC_LCTRL, KC_LALT, KC_LGUI, LOWER, KC_BSPC, KC_SPC, RAISE, KC_ALAP, KC_LEFT, KC_DOWN, KC_RGHT, KC_ESCT, KC_TBAL, KC_LGUI, LOWRS, KC_BSPC,\ + //`--------------------------------------------------------------------------------------------------------------------' --------------------------------------------' + KC_DEL \ + // ExtraKey: Split backspace key or it is below the enter key. + ), + + [_LOWRS] = LAYOUT_rs( \ + // Treadstone48 Rhymestone + //,--------------------------------------------------------------------------------------------------------------------. --------------------------------------------. + _____, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_MINS, KC_EQL, KC_JYEN, KC_LBRC, KC_RBRC, KC_DEL, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5,\ + //|--------+--------+--------+--------+--------+--------|--------+--------+--------+--------+--------+-----------------| --------+--------+--------+--------+--------| + _____, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, XXXXX, XXXXX, KC_SCLN, KC_QUOT, KC_BSLS, _____, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10,\ + //|--------+--------+--------+--------+--------+--------|--------+--------+--------+--------+--------+--------+--------| --------+--------+--------+--------+--------| + _____, KC_F11, KC_F12, BASE, KANJI, KC_ENT, XXXXX, KC_COMM, KC_DOT, KC_SLSH, KC_RO, KC_PGUP, KC_11SF, KC_F12, BASE, KANJI, KC_ENT,\ + //|--------+--------+--------+--------+--------+--------|--------+--------+--------+--------+--------+--------+--------| --------+--------+--------+--------+--------| + _____, _____, _____, _____, KC_DEL, _____, _____, XXXXX, KC_HOME, KC_PGDN, KC_END, _____, _____, _____, _____, KC_DEL,\ + //`--------------------------------------------------------------------------------------------------------------------' --------------------------------------------' + XXXXX \ + // ExtraKey: Split backspace key or it is below the enter key. + ), + + [_RAISE] = LAYOUT_rs( \ + // Treadstone48 Rhymestone + //,--------------------------------------------------------------------------------------------------------------------. --------------------------------------------. + _____, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX,\ + //|--------+--------+--------+--------+--------+--------|--------+--------+--------+--------+--------+-----------------| --------+--------+--------+--------+--------| + _____, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, KC_4, KC_5, KC_6, KC_QUOT, _____, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX,\ + //|--------+--------+--------+--------+--------+--------|--------+--------+--------+--------+--------+--------+--------| --------+--------+--------+--------+--------| + _____, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, KC_1, KC_2, KC_3, KC_RO, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX,\ + //|--------+--------+--------+--------+--------+--------|--------+--------+--------+--------+--------+--------+--------| --------+--------+--------+--------+--------| + _____, _____, _____, _____, _____, _____, _____, KC_0, KC_DOT, KC_COMM, KC_SLSH, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX,\ + //`--------------------------------------------------------------------------------------------------------------------' --------------------------------------------' + XXXXX \ + // ExtraKey: Split backspace key or it is below the enter key. + ), + + [_ADJUST] = LAYOUT_rs( \ + // Treadstone48 Rhymestone + //,--------------------------------------------------------------------------------------------------------------------. --------------------------------------------. + XXXXX, RESET, RGBRST, AG_NORM, AG_SWAP, XXXXX, XXXXX, KC_WH_L, KC_WH_U, KC_HOME, KC_PGUP, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX,\ + //|--------+--------+--------+--------+--------+--------|--------+--------+--------+--------+--------+-----------------| --------+--------+--------+--------+--------| + XXXXX, RGB_TOG, RGB_HUI, RGB_SAI, RGB_VAI, XXXXX, XXXXX, KC_WH_R, KC_WH_D, KC_END, KC_PGDN, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX,\ + //|--------+--------+--------+--------+--------+--------|--------+--------+--------+--------+--------+--------+--------| --------+--------+--------+--------+--------| + _____, RGB_MOD, RGB_HUD, RGB_SAD, RGB_VAD, XXXXX, XXXXX, XXXXX, KC_BTN1, KC_BTN2, XXXXX, KC_MS_U, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX,\ + //|--------+--------+--------+--------+--------+--------|--------+--------+--------+--------+--------+--------+--------| --------+--------+--------+--------+--------| + _____, _____, _____, _____, XXXXX, XXXXX, _____, XXXXX, KC_MS_L, KC_MS_D, KC_MS_R, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX,\ + //`--------------------------------------------------------------------------------------------------------------------' --------------------------------------------' + XXXXX \ + // ExtraKey: Split backspace key or it is below the enter key. + ) +}; + +#define L_BASE _BASE +#define L_BASES (1<<_BASES) +#define L_LOWER (1<<_LOWER) +#define L_LOWRS (1<<_LOWRS) +#define L_RAISE (1<<_RAISE) +#define L_ADJUST (1<<_ADJUST) +#define L_ADJUST_TRI (L_ADJUST|L_RAISE|L_LOWER) + +#ifdef SSD1306OLED +typedef struct { + uint8_t state; + char name[8]; +}LAYER_DISPLAY_NAME; + +#define LAYER_DISPLAY_MAX 7 +const LAYER_DISPLAY_NAME layer_display_name[LAYER_DISPLAY_MAX] = { + {L_BASE, "Base"}, + {L_BASE + 1, "Base"}, + {L_BASES, "BaseSpl"}, + {L_LOWER, "Lower"}, + {L_LOWRS, "LowrSpl"}, + {L_RAISE, "Raise"}, + {L_ADJUST_TRI, "Adjust"} +}; + +static inline const char* get_leyer_status(void) { + + for (uint8_t i = 0; i < LAYER_DISPLAY_MAX; ++i) { + if (layer_state == 0 && layer_display_name[i].state == default_layer_state) { + + return layer_display_name[i].name; + } else if (layer_state != 0 && layer_display_name[i].state == layer_state) { + + return layer_display_name[i].name; + } + } + + return "?"; +} + +static char layer_status_buf[24] = "Layer state ready.\n"; +static inline void update_keymap_status(void) { + + snprintf(layer_status_buf, sizeof(layer_status_buf) - 1, "OS:%s Layer:%s\n", + keymap_config.swap_lalt_lgui? "win" : "mac", get_leyer_status()); +} + +static inline void render_keymap_status(struct CharacterMatrix *matrix) { + + matrix_write(matrix, layer_status_buf); +} + +#define UPDATE_KEYMAP_STATUS() update_keymap_status() +#define RENDER_KEYMAP_STATUS(a) render_keymap_status(a) + +#else + +#define UPDATE_KEYMAP_STATUS() +#define RENDER_KEYMAP_STATUS(a) + +#endif + +void update_change_layer(bool pressed, uint8_t layer1, uint8_t layer2, uint8_t layer3) { + + pressed ? layer_on(layer1) : layer_off(layer1); + IS_LAYER_ON(layer1) && IS_LAYER_ON(layer2) ? layer_on(layer3) : layer_off(layer3); +} + +int RGB_current_mode; +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + + UPDATE_KEY_STATUS(keycode, record); + + bool result = false; + switch (keycode) { + case LOWER: + update_change_layer(record->event.pressed, _LOWER, _RAISE, _ADJUST); + break; + case RAISE: + update_change_layer(record->event.pressed, _RAISE, _LOWER, _ADJUST); + break; + case BASE: + if (record->event.pressed) { + default_layer_set(L_BASE); + } + break; + case BASES: + if (record->event.pressed) { + default_layer_set(L_BASES); + } + break; + case LOWRS: + update_change_layer(record->event.pressed, _LOWRS, _RAISE, _ADJUST); + break; + case KANJI: + if (record->event.pressed) { + if (keymap_config.swap_lalt_lgui == false) { + register_code(KC_LANG2); + } else { + SEND_STRING(SS_LALT("`")); + } + } else { + unregister_code(KC_LANG2); + } + break; + #ifdef RGBLIGHT_ENABLE + case RGB_MOD: + if (record->event.pressed) { + rgblight_mode(RGB_current_mode); + rgblight_step(); + RGB_current_mode = rgblight_config.mode; + } + break; + case RGBRST: + if (record->event.pressed) { + eeconfig_update_rgblight_default(); + rgblight_enable(); + RGB_current_mode = rgblight_config.mode; + } + break; + #endif + default: + result = true; + break; + } + + UPDATE_KEYMAP_STATUS(); + return result; +} + +void matrix_init_user(void) { + #ifdef RGBLIGHT_ENABLE + RGB_current_mode = rgblight_config.mode; + #endif + //SSD1306 OLED init, make sure to add #define SSD1306OLED in config.h + #ifdef SSD1306OLED + iota_gfx_init(!has_usb()); // turns on the display + #endif +} + +//SSD1306 OLED update loop, make sure to add #define SSD1306OLED in config.h +#ifdef SSD1306OLED + +void matrix_scan_user(void) { + iota_gfx_task(); // this is what updates the display continuously +} + +static inline void matrix_update(struct CharacterMatrix *dest, + const struct CharacterMatrix *source) { + if (memcmp(dest->display, source->display, sizeof(dest->display))) { + memcpy(dest->display, source->display, sizeof(dest->display)); + dest->dirty = true; + } +} + +static inline void render_status(struct CharacterMatrix *matrix) { + + UPDATE_LED_STATUS(); + RENDER_LED_STATUS(matrix); + RENDER_KEYMAP_STATUS(matrix); + UPDATE_LOCK_STATUS(); + RENDER_LOCK_STATUS(matrix); + RENDER_KEY_STATUS(matrix); +} + +void iota_gfx_task_user(void) { + struct CharacterMatrix matrix; + + #if DEBUG_TO_SCREEN + if (debug_enable) { + return; + } + #endif + + matrix_clear(&matrix); + if (is_master) { + render_status(&matrix); + } + + matrix_update(&display, &matrix); +} + +#endif diff --git a/keyboards/treadstone48/keymaps/like_jis_rs/readme.md b/keyboards/treadstone48/keymaps/like_jis_rs/readme.md new file mode 100644 index 00000000000..796df6c4cd7 --- /dev/null +++ b/keyboards/treadstone48/keymaps/like_jis_rs/readme.md @@ -0,0 +1,5 @@ +# The like jis type keyboard keymap for treadstone48 + +## Description + +## How to use diff --git a/keyboards/treadstone48/keymaps/like_jis_rs/readme_jp.md b/keyboards/treadstone48/keymaps/like_jis_rs/readme_jp.md new file mode 100644 index 00000000000..5a6fc1d73b8 --- /dev/null +++ b/keyboards/treadstone48/keymaps/like_jis_rs/readme_jp.md @@ -0,0 +1,84 @@ +# JISキーボードライクなキーマップ + +## 概要 + +　デフォルトキーマップの記号類をJISライクな配置に揃えなおしたものです。 +　オプションのRhymestone用のマップを使用するために拡張しています。RhymestoneのpromicroにもTreadstone48のキーマップを入れてください。 +　Rhymestoneは基本的には左手側を使うことを想定していますが、右手側を使用する場合はrules.mkにあるRHYMESTONE_RIGHTHAND設定をyesにすれば使えるようになります。 + +```RHYMESTONE_RIGHTHAND=yes``` + +## キーマップの見かた + +qmk_firmware\tmk_core\common\keycode.h +に基本的なキーコードがあります。また、Keymap.cの上部にカスタムしたKC_で始まるものを登録しています。 +キーマップに書くときは「KC_」を省略して書いています。 +例：KC_A → A + +Leyer Tap、Mod Tap、Tap DanceというQMKの機能を使っています。 + +Layer Tapはタップで指定したキー、長押しで指定したレイヤーに移動します。 +例：LT(RAISE, KC_V) → タップでV、長押しでRAISEレイヤー移動 + +Mod Tapはタップで視程したキー、長押しで視程したレイヤーに移動します。 +例：LSFT_T(KC_Z) → タップでZ、長押しで左シフト + +Tap Danceは指定した二つのキーをシングルタップ、ダブルタップで切り替えられます。 +例：[TD_CODO] = ACTION_TAP_DANCE_DOUBLE(KC_COMM, KC_DOT) → シングルタップでCOMM、ダブルタップでDOT + +もう少し詳しい内容についてはQMK Documentをお読みいただくかネットを検索すれば情報が載っていますので別途検索してみてください。 + +## 機能 + +　QWERTYキーマップをベースにしていて、LowerレイヤーとRaiseレイヤーに他のキーを配置しています。 +　LowerとRaiseを同時押しでAdjustレイヤーを使うことが出来ます。 +　DOTの横、SLROと書いてあるのはシングルタップで/記号、ダブルタップで\記号が入力出来るようになっています。 +　Lの横、SCCLと書いてあるのはシングルタップで;記号、ダブルタップで:記号が入力出来るようになっています。 +　マウスキーの割り当てがありますので、もし使用したい場合はrules.mkでMOUSEKEY_ENABLE = yesにしてmakeすると使用することができます。 + +## 48キー目について + +　このキーボードはEnterキーの上の2Uキーを1Ux2個にして使用する事が出来るようになっています。 使用する場合はキーマップの書き換えが必要です。 + +　各レイヤーの最下段の + +```c + XXXXX \ + // ExtraKey: Split backspace key or it is below the enter key. +``` + +　のXXXXXに任意のキーを入れることでPの右隣のキーとして動作するようになっています。その右隣りに従来のキーが配置されています。 + +## OS切り替え方法 + +　Adjustレイヤーにあります。LowerとRaiseを同時押しでAdjustレイヤーを使うことが出来ます。 + +- KNRM: QMKのノーマル状態です。macだと正常に使える（はず）です +- KSWP: ノーマル状態のままWindowsで使用するとALTキーとGUI（win）キーが逆ですので、それを入れ換えます。Windowsユーザーはこちらのモードにしてください + +## NUMPADモードについて + +　Lower + DLNPキーを一度押下するとNumpadモードになります。通常モードに戻す場合はDLBSキーを押下してください。 + +## IME切り替え方法 + +　Winの場合、LowerレイヤーにKANJIキー（半角/全角　漢字）がありますので、Lower+KANJIで切り替えてください。 + +## ソフトウェアリセットについて + +　キーボードにはハードウェアのリセットボタンが付いていますが、ソフトウェアリセットをかけられます。 +　LowerとRaiseを同時押しでAdjustレイヤーを使うことが出来、AdjustレイヤーのRSTを押下するとリセットがかかります。 + +## LEDの点灯切り替え方法 + +　Adjustレイヤーにあります。LowerとRaiseを同時押しでAdjustレイヤーを使うことが出来ます。 + +- RGBRST: LEDのリセット +- RGB_TOG: LEDのON/OFF切り替え +- RGB_MOD: LEDの光り方の変更 +- RGB_HUI: Hue+ 色合いを変更 +- RGB_HUD: Hue- 色合いを変更 +- RGB_SAI: Saturation+ 色の濃さを変更 +- RGB_SAD: Saturation- 色の濃さを変更 +- RGB_VAI: Value+ 明るさを変更 +- RGB_VAD: Value- 明るさを変更 diff --git a/keyboards/treadstone48/keymaps/like_jis_rs/rules.mk b/keyboards/treadstone48/keymaps/like_jis_rs/rules.mk new file mode 100644 index 00000000000..c34bb2e34a0 --- /dev/null +++ b/keyboards/treadstone48/keymaps/like_jis_rs/rules.mk @@ -0,0 +1,67 @@ + +# Build Options +# change to "no" to disable the options, or define them in the Makefile in +# the appropriate keymap folder that will get included automatically +# +BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = no # Mouse keys(+4700) +EXTRAKEY_ENABLE = no # Audio control and System control(+450) +CONSOLE_ENABLE = no # Console for debug(+400) +COMMAND_ENABLE = no # Commands for debug and configuration +NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +MIDI_ENABLE = no # MIDI controls +AUDIO_ENABLE = no # Audio output on port C6 +UNICODE_ENABLE = no # Unicode +BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID +RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. +SWAP_HANDS_ENABLE = no # Enable one-hand typing +TAP_DANCE_ENABLE = yes + +# If your custom treadstone48 pcb, you can rewrite to yes. +OLED_ENABLE = no # OLED_ENABLE +LED_UNDERGLOW_ENABLE = yes # LED underglow (Enable WS2812 RGB underlight.) +LED_ANIMATIONS = yes # LED animations + +# Other selectable option +IOS_DEVICE_ENABLE = no # connect to IOS device (iPad,iPhone) +LOCAL_GLCDFONT = no # use each keymaps "font.h" insted of "common/glcdfont.c" +RHYMESTONE_RIGHTHAND = no # If connect right hand side of the Rhymestone, set to yes. +ANGELINA_KEYMAP = no # If Alfa verstion use set to yes. + +ifeq ($(strip $(OLED_ENABLE)), yes) + OPT_DEFS += -DOLED_ENABLE +endif + +ifeq ($(strip $(LED_UNDERGLOW_ENABLE)), yes) + RGBLIGHT_ENABLE = yes +else + RGBLIGHT_ENABLE = no +endif + +ifeq ($(strip $(LED_ANIMATIONS)), yes) + # OPT_DEFS += -DRGBLIGHT_ANIMATIONS + OPT_DEFS += -DLED_ANIMATIONS +endif + +ifeq ($(strip $(IOS_DEVICE_ENABLE)), yes) + OPT_DEFS += -DIOS_DEVICE_ENABLE +endif + +ifeq ($(strip $(LOCAL_GLCDFONT)), yes) + OPT_DEFS += -DLOCAL_GLCDFONT +endif + +ifeq ($(strip $(RHYMESTONE_RIGHTHAND)), yes) + OPT_DEFS += -DRHYMESTONE_RIGHTHAND +endif + +ifeq ($(strip $(ANGELINA_KEYMAP)), yes) + OPT_DEFS += -DANGELINA_KEYMAP +endif + +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend + +# If you want to change the display of OLED, you need to change here +SRC += ./common/oled_helper.c \ diff --git a/keyboards/treadstone48/pro_micro.h b/keyboards/treadstone48/pro_micro.h new file mode 100644 index 00000000000..f9e7ed75d9d --- /dev/null +++ b/keyboards/treadstone48/pro_micro.h @@ -0,0 +1,362 @@ +/* + pins_arduino.h - Pin definition functions for Arduino + Part of Arduino - http://www.arduino.cc/ + + Copyright (c) 2007 David A. Mellis + + This library is free software; you can redistribute it and/or + modify it under the terms of the GNU Lesser General Public + License as published by the Free Software Foundation; either + version 2.1 of the License, or (at your option) any later version. + + This library is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + Lesser General Public License for more details. + + You should have received a copy of the GNU Lesser General + Public License along with this library; if not, write to the + Free Software Foundation, Inc., 59 Temple Place, Suite 330, + Boston, MA 02111-1307 USA + + $Id: wiring.h 249 2007-02-03 16:52:51Z mellis $ +*/ + +#ifndef Pins_Arduino_h +#define Pins_Arduino_h + +#include + +// Workaround for wrong definitions in "iom32u4.h". +// This should be fixed in the AVR toolchain. +#undef UHCON +#undef UHINT +#undef UHIEN +#undef UHADDR +#undef UHFNUM +#undef UHFNUML +#undef UHFNUMH +#undef UHFLEN +#undef UPINRQX +#undef UPINTX +#undef UPNUM +#undef UPRST +#undef UPCONX +#undef UPCFG0X +#undef UPCFG1X +#undef UPSTAX +#undef UPCFG2X +#undef UPIENX +#undef UPDATX +#undef TCCR2A +#undef WGM20 +#undef WGM21 +#undef COM2B0 +#undef COM2B1 +#undef COM2A0 +#undef COM2A1 +#undef TCCR2B +#undef CS20 +#undef CS21 +#undef CS22 +#undef WGM22 +#undef FOC2B +#undef FOC2A +#undef TCNT2 +#undef TCNT2_0 +#undef TCNT2_1 +#undef TCNT2_2 +#undef TCNT2_3 +#undef TCNT2_4 +#undef TCNT2_5 +#undef TCNT2_6 +#undef TCNT2_7 +#undef OCR2A +#undef OCR2_0 +#undef OCR2_1 +#undef OCR2_2 +#undef OCR2_3 +#undef OCR2_4 +#undef OCR2_5 +#undef OCR2_6 +#undef OCR2_7 +#undef OCR2B +#undef OCR2_0 +#undef OCR2_1 +#undef OCR2_2 +#undef OCR2_3 +#undef OCR2_4 +#undef OCR2_5 +#undef OCR2_6 +#undef OCR2_7 + +#define NUM_DIGITAL_PINS 30 +#define NUM_ANALOG_INPUTS 12 + +#define TX_RX_LED_INIT DDRD |= (1<<5), DDRB |= (1<<0) +#define TXLED0 PORTD |= (1<<5) +#define TXLED1 PORTD &= ~(1<<5) +#define RXLED0 PORTB |= (1<<0) +#define RXLED1 PORTB &= ~(1<<0) + +static const uint8_t SDA = 2; +static const uint8_t SCL = 3; +#define LED_BUILTIN 13 + +// Map SPI port to 'new' pins D14..D17 +static const uint8_t SS = 17; +static const uint8_t MOSI = 16; +static const uint8_t MISO = 14; +static const uint8_t SCK = 15; + +// Mapping of analog pins as digital I/O +// A6-A11 share with digital pins +static const uint8_t ADC0 = 18; +static const uint8_t ADC1 = 19; +static const uint8_t ADC2 = 20; +static const uint8_t ADC3 = 21; +static const uint8_t ADC4 = 22; +static const uint8_t ADC5 = 23; +static const uint8_t ADC6 = 24; // D4 +static const uint8_t ADC7 = 25; // D6 +static const uint8_t ADC8 = 26; // D8 +static const uint8_t ADC9 = 27; // D9 +static const uint8_t ADC10 = 28; // D10 +static const uint8_t ADC11 = 29; // D12 + +#define digitalPinToPCICR(p) ((((p) >= 8 && (p) <= 11) || ((p) >= 14 && (p) <= 17) || ((p) >= A8 && (p) <= A10)) ? (&PCICR) : ((uint8_t *)0)) +#define digitalPinToPCICRbit(p) 0 +#define digitalPinToPCMSK(p) ((((p) >= 8 && (p) <= 11) || ((p) >= 14 && (p) <= 17) || ((p) >= A8 && (p) <= A10)) ? (&PCMSK0) : ((uint8_t *)0)) +#define digitalPinToPCMSKbit(p) ( ((p) >= 8 && (p) <= 11) ? (p) - 4 : ((p) == 14 ? 3 : ((p) == 15 ? 1 : ((p) == 16 ? 2 : ((p) == 17 ? 0 : (p - A8 + 4)))))) + +// __AVR_ATmega32U4__ has an unusual mapping of pins to channels +extern const uint8_t PROGMEM analog_pin_to_channel_PGM[]; +#define analogPinToChannel(P) ( pgm_read_byte( analog_pin_to_channel_PGM + (P) ) ) + +#define digitalPinToInterrupt(p) ((p) == 0 ? 2 : ((p) == 1 ? 3 : ((p) == 2 ? 1 : ((p) == 3 ? 0 : ((p) == 7 ? 4 : NOT_AN_INTERRUPT))))) + +#ifdef ARDUINO_MAIN + +// On the Arduino board, digital pins are also used +// for the analog output (software PWM). Analog input +// pins are a separate set. + +// ATMEL ATMEGA32U4 / ARDUINO LEONARDO +// +// D0 PD2 RXD1/INT2 +// D1 PD3 TXD1/INT3 +// D2 PD1 SDA SDA/INT1 +// D3# PD0 PWM8/SCL OC0B/SCL/INT0 +// D4 A6 PD4 ADC8 +// D5# PC6 ??? OC3A/#OC4A +// D6# A7 PD7 FastPWM #OC4D/ADC10 +// D7 PE6 INT6/AIN0 +// +// D8 A8 PB4 ADC11/PCINT4 +// D9# A9 PB5 PWM16 OC1A/#OC4B/ADC12/PCINT5 +// D10# A10 PB6 PWM16 OC1B/0c4B/ADC13/PCINT6 +// D11# PB7 PWM8/16 0C0A/OC1C/#RTS/PCINT7 +// D12 A11 PD6 T1/#OC4D/ADC9 +// D13# PC7 PWM10 CLK0/OC4A +// +// A0 D18 PF7 ADC7 +// A1 D19 PF6 ADC6 +// A2 D20 PF5 ADC5 +// A3 D21 PF4 ADC4 +// A4 D22 PF1 ADC1 +// A5 D23 PF0 ADC0 +// +// New pins D14..D17 to map SPI port to digital pins +// +// MISO D14 PB3 MISO,PCINT3 +// SCK D15 PB1 SCK,PCINT1 +// MOSI D16 PB2 MOSI,PCINT2 +// SS D17 PB0 RXLED,SS/PCINT0 +// +// Connected LEDs on board for TX and RX +// TXLED D24 PD5 XCK1 +// RXLED D17 PB0 +// HWB PE2 HWB + +// these arrays map port names (e.g. port B) to the +// appropriate addresses for various functions (e.g. reading +// and writing) +const uint16_t PROGMEM port_to_mode_PGM[] = { + NOT_A_PORT, + NOT_A_PORT, + (uint16_t) &DDRB, + (uint16_t) &DDRC, + (uint16_t) &DDRD, + (uint16_t) &DDRE, + (uint16_t) &DDRF, +}; + +const uint16_t PROGMEM port_to_output_PGM[] = { + NOT_A_PORT, + NOT_A_PORT, + (uint16_t) &PORTB, + (uint16_t) &PORTC, + (uint16_t) &PORTD, + (uint16_t) &PORTE, + (uint16_t) &PORTF, +}; + +const uint16_t PROGMEM port_to_input_PGM[] = { + NOT_A_PORT, + NOT_A_PORT, + (uint16_t) &PINB, + (uint16_t) &PINC, + (uint16_t) &PIND, + (uint16_t) &PINE, + (uint16_t) &PINF, +}; + +const uint8_t PROGMEM digital_pin_to_port_PGM[] = { + PD, // D0 - PD2 + PD, // D1 - PD3 + PD, // D2 - PD1 + PD, // D3 - PD0 + PD, // D4 - PD4 + PC, // D5 - PC6 + PD, // D6 - PD7 + PE, // D7 - PE6 + + PB, // D8 - PB4 + PB, // D9 - PB5 + PB, // D10 - PB6 + PB, // D11 - PB7 + PD, // D12 - PD6 + PC, // D13 - PC7 + + PB, // D14 - MISO - PB3 + PB, // D15 - SCK - PB1 + PB, // D16 - MOSI - PB2 + PB, // D17 - SS - PB0 + + PF, // D18 - A0 - PF7 + PF, // D19 - A1 - PF6 + PF, // D20 - A2 - PF5 + PF, // D21 - A3 - PF4 + PF, // D22 - A4 - PF1 + PF, // D23 - A5 - PF0 + + PD, // D24 - PD5 + PD, // D25 / D6 - A7 - PD7 + PB, // D26 / D8 - A8 - PB4 + PB, // D27 / D9 - A9 - PB5 + PB, // D28 / D10 - A10 - PB6 + PD, // D29 / D12 - A11 - PD6 +}; + +const uint8_t PROGMEM digital_pin_to_bit_mask_PGM[] = { + _BV(2), // D0 - PD2 + _BV(3), // D1 - PD3 + _BV(1), // D2 - PD1 + _BV(0), // D3 - PD0 + _BV(4), // D4 - PD4 + _BV(6), // D5 - PC6 + _BV(7), // D6 - PD7 + _BV(6), // D7 - PE6 + + _BV(4), // D8 - PB4 + _BV(5), // D9 - PB5 + _BV(6), // D10 - PB6 + _BV(7), // D11 - PB7 + _BV(6), // D12 - PD6 + _BV(7), // D13 - PC7 + + _BV(3), // D14 - MISO - PB3 + _BV(1), // D15 - SCK - PB1 + _BV(2), // D16 - MOSI - PB2 + _BV(0), // D17 - SS - PB0 + + _BV(7), // D18 - A0 - PF7 + _BV(6), // D19 - A1 - PF6 + _BV(5), // D20 - A2 - PF5 + _BV(4), // D21 - A3 - PF4 + _BV(1), // D22 - A4 - PF1 + _BV(0), // D23 - A5 - PF0 + + _BV(5), // D24 - PD5 + _BV(7), // D25 / D6 - A7 - PD7 + _BV(4), // D26 / D8 - A8 - PB4 + _BV(5), // D27 / D9 - A9 - PB5 + _BV(6), // D28 / D10 - A10 - PB6 + _BV(6), // D29 / D12 - A11 - PD6 +}; + +const uint8_t PROGMEM digital_pin_to_timer_PGM[] = { + NOT_ON_TIMER, + NOT_ON_TIMER, + NOT_ON_TIMER, + TIMER0B, /* 3 */ + NOT_ON_TIMER, + TIMER3A, /* 5 */ + TIMER4D, /* 6 */ + NOT_ON_TIMER, + + NOT_ON_TIMER, + TIMER1A, /* 9 */ + TIMER1B, /* 10 */ + TIMER0A, /* 11 */ + + NOT_ON_TIMER, + TIMER4A, /* 13 */ + + NOT_ON_TIMER, + NOT_ON_TIMER, + NOT_ON_TIMER, + NOT_ON_TIMER, + NOT_ON_TIMER, + NOT_ON_TIMER, + + NOT_ON_TIMER, + NOT_ON_TIMER, + NOT_ON_TIMER, + NOT_ON_TIMER, + NOT_ON_TIMER, + NOT_ON_TIMER, + NOT_ON_TIMER, + NOT_ON_TIMER, + NOT_ON_TIMER, + NOT_ON_TIMER, +}; + +const uint8_t PROGMEM analog_pin_to_channel_PGM[] = { + 7, // A0 PF7 ADC7 + 6, // A1 PF6 ADC6 + 5, // A2 PF5 ADC5 + 4, // A3 PF4 ADC4 + 1, // A4 PF1 ADC1 + 0, // A5 PF0 ADC0 + 8, // A6 D4 PD4 ADC8 + 10, // A7 D6 PD7 ADC10 + 11, // A8 D8 PB4 ADC11 + 12, // A9 D9 PB5 ADC12 + 13, // A10 D10 PB6 ADC13 + 9 // A11 D12 PD6 ADC9 +}; + +#endif /* ARDUINO_MAIN */ + +// These serial port names are intended to allow libraries and architecture-neutral +// sketches to automatically default to the correct port name for a particular type +// of use. For example, a GPS module would normally connect to SERIAL_PORT_HARDWARE_OPEN, +// the first hardware serial port whose RX/TX pins are not dedicated to another use. +// +// SERIAL_PORT_MONITOR Port which normally prints to the Arduino Serial Monitor +// +// SERIAL_PORT_USBVIRTUAL Port which is USB virtual serial +// +// SERIAL_PORT_LINUXBRIDGE Port which connects to a Linux system via Bridge library +// +// SERIAL_PORT_HARDWARE Hardware serial port, physical RX & TX pins. +// +// SERIAL_PORT_HARDWARE_OPEN Hardware serial ports which are open for use. Their RX & TX +// pins are NOT connected to anything by default. +#define SERIAL_PORT_MONITOR Serial +#define SERIAL_PORT_USBVIRTUAL Serial +#define SERIAL_PORT_HARDWARE Serial1 +#define SERIAL_PORT_HARDWARE_OPEN Serial1 + +#endif /* Pins_Arduino_h */ diff --git a/keyboards/treadstone48/readme.md b/keyboards/treadstone48/readme.md new file mode 100644 index 00000000000..eef39c39b33 --- /dev/null +++ b/keyboards/treadstone48/readme.md @@ -0,0 +1,18 @@ +# treadstone48 + +![treadstone48](https://github.com/marksard/Keyboards/raw/master/_image/20181219-PC190003.jpg) + +A 47 (or 48) keys Symmetric Staggered keyboard. + +Keyboard Maintainer: [marksard](https://github.com/marksard) +Hardware Supported: The PCBs, controllers supported +Hardware Availability: links to where you can find this hardware + +Make example for this keyboard (after setting up your build environment): + + make treadstone48:default + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). + +[Build guide](https://github.com/marksard/Keyboards/blob/master/treadstpne48/documents/treadstone48_buildguide.md) +[Firmware](https://github.com/marksard/qmk_firmware/tree/my_customize/keyboards/treadstone48) diff --git a/keyboards/treadstone48/rev1/config.h b/keyboards/treadstone48/rev1/config.h new file mode 100644 index 00000000000..aa6dd9e6349 --- /dev/null +++ b/keyboards/treadstone48/rev1/config.h @@ -0,0 +1,133 @@ +/* +Copyright 2012 Jun Wako +Copyright 2015 Jack Humbert + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#ifndef REV1_CONFIG_H +#define REV1_CONFIG_H + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0xFEED +#define PRODUCT_ID 0xDFA3 +#define DEVICE_VER 0x0010 +#define MANUFACTURER marksard +#define PRODUCT treadstone48 +#define DESCRIPTION Symmetrical staggered 47+1 Keys Keyboard + +#define PREVENT_STUCK_MODIFIERS +#define TAPPING_FORCE_HOLD +#define TAPPING_TERM 150 + +/* Use I2C or Serial */ +#define USE_I2C +#define USE_SERIAL +//#define USE_MATRIX_I2C + +/* Select hand configuration */ +#define MASTER_LEFT +// #define MASTER_RIGHT +// #define EE_HANDS + +// OLED support +// see ./rules.mk: OLED_ENABLE=yes or no +#ifdef OLED_ENABLE + #define SSD1306OLED +#endif + +/* key matrix size */ +// Rows are doubled-up +#define MATRIX_ROWS 16 +#define MATRIX_ROW_PINS { F4, F5, F6, F7, B1, B3, B2, B6 } + +// wiring of each half +#define MATRIX_COLS 6 +#define MATRIX_COL_PINS { D4, C6, D7, E6, B4, B5 } + +/* define if matrix has ghost */ +//#define MATRIX_HAS_GHOST + +/* number of backlight levels */ +// #define BACKLIGHT_LEVELS 3 + +/* Set 0 if debouncing isn't needed */ +#define DEBOUNCING_DELAY 5 + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +//#define LOCKING_SUPPORT_ENABLE +/* Locking resynchronize hack */ +//#define LOCKING_RESYNC_ENABLE + +/* key combination for command */ +#define IS_COMMAND() ( \ + keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \ +) + +/* ws2812 RGB LED */ +#define RGB_DI_PIN D3 +#define RGBLIGHT_TIMER +//#define RGBLED_NUM 12 // Number of LEDs. see ./keymaps/default/config.h +#define ws2812_PORTREG PORTD +#define ws2812_DDRREG DDRD + +// treadstone48 keyboard RGB LED support +//#define RGBLIGHT_ANIMATIONS : see ./rules.mk: LED_ANIMATIONS = yes or no +// see ./rules.mk: LED_BACK_ENABLE or LED_UNDERGLOW_ENABLE set yes +#define RGBLED_NUM 12 + +#ifndef IOS_DEVICE_ENABLE + #define RGBLIGHT_LIMIT_VAL 180 + #define RGBLIGHT_VAL_STEP 17 +#else + #define RGBLIGHT_LIMIT_VAL 50 + #define RGBLIGHT_VAL_STEP 4 +#endif +#define RGBLIGHT_HUE_STEP 10 +#define RGBLIGHT_SAT_STEP 17 + +#if defined(RGBLIGHT_ENABLE) && !defined(IOS_DEVICE_ENABLE) +// USB_MAX_POWER_CONSUMPTION value for treadstone48 keyboard +// 120 RGBoff, OLEDoff +// 120 OLED +// 330 RGB 6 +// 300 RGB 32 +// 310 OLED & RGB 32 + #define USB_MAX_POWER_CONSUMPTION 400 +#else + // fix iPhone and iPad power adapter issue + // iOS device need lessthan 100 + #define USB_MAX_POWER_CONSUMPTION 100 +#endif + +/* + * Feature disable options + * These options are also useful to firmware size reduction. + */ + +/* disable debug print */ +// #define NO_DEBUG + +/* disable print */ +// #define NO_PRINT + +/* disable action features */ +//#define NO_ACTION_LAYER +//#define NO_ACTION_TAPPING +//#define NO_ACTION_ONESHOT +//#define NO_ACTION_MACRO +//#define NO_ACTION_FUNCTION + + +#endif diff --git a/keyboards/treadstone48/rev1/info.json b/keyboards/treadstone48/rev1/info.json new file mode 100644 index 00000000000..df9e7591b50 --- /dev/null +++ b/keyboards/treadstone48/rev1/info.json @@ -0,0 +1,261 @@ +{ + "keyboard_name": "Treadstone48", + "url": "https://github.com/marksard/Keyboards", + "maintainer": "marksard", + "width": 14.75, + "height": 4, + "layouts": { + "LAYOUT_base": { + "layout": [ + { + "label": "Esc", + "x": 1, + "y": 0 + }, + { + "label": "Q", + "x": 2.25, + "y": 0 + }, + { + "label": "W", + "x": 3.25, + "y": 0 + }, + { + "label": "E", + "x": 4.25, + "y": 0 + }, + { + "label": "R", + "x": 5.25, + "y": 0 + }, + { + "label": "T", + "x": 6.25, + "y": 0 + }, + { + "label": "Y", + "x": 7.75, + "y": 0 + }, + { + "label": "U", + "x": 8.75, + "y": 0 + }, + { + "label": "I", + "x": 9.75, + "y": 0 + }, + { + "label": "O", + "x": 10.75, + "y": 0 + }, + { + "label": "P", + "x": 11.75, + "y": 0 + }, + { + "label": "-", + "x": 13.75, + "y": 0 + }, + { + "label": "Tab", + "x": 1, + "y": 1, + "w": 1.5 + }, + { + "label": "A", + "x": 2.5, + "y": 1 + }, + { + "label": "S", + "x": 3.5, + "y": 1 + }, + { + "label": "D", + "x": 4.5, + "y": 1 + }, + { + "label": "F", + "x": 5.5, + "y": 1 + }, + { + "label": "G", + "x": 6.5, + "y": 1 + }, + { + "label": "H", + "x": 7.5, + "y": 1 + }, + { + "label": "J", + "x": 8.5, + "y": 1 + }, + { + "label": "K", + "x": 9.5, + "y": 1 + }, + { + "label": "L", + "x": 10.5, + "y": 1 + }, + { + "label": ":", + "x": 11.5, + "y": 1 + }, + { + "label": "Enter", + "x": 12.5, + "y": 1, + "w": 2.25 + }, + { + "label": "Shift", + "x": 0, + "y": 2, + "w": 2.25 + }, + { + "label": "Z", + "x": 2.25, + "y": 2 + }, + { + "label": "X", + "x": 3.25, + "y": 2 + }, + { + "label": "C", + "x": 4.25, + "y": 2 + }, + { + "label": "V", + "x": 5.25, + "y": 2 + }, + { + "label": "B", + "x": 6.25, + "y": 2 + }, + { + "label": "N", + "x": 7.75, + "y": 2 + }, + { + "label": "M", + "x": 8.75, + "y": 2 + }, + { + "label": "<", + "x": 9.75, + "y": 2 + }, + { + "label": ">", + "x": 10.75, + "y": 2 + }, + { + "label": "?", + "x": 11.75, + "y": 2 + }, + { + "label": "\u2191", + "x": 12.75, + "y": 2 + }, + { + "label": "Ctrl", + "x": 0.75, + "y": 3, + "w": 1.25 + }, + { + "label": "Win", + "x": 2, + "y": 3, + "w": 1.25 + }, + { + "label": "Alt", + "x": 3.25, + "y": 3, + "w": 1.25 + }, + { + "label": "Lower", + "x": 4.5, + "y": 3 + }, + { + "label": "BackSpace", + "x": 5.5, + "y": 3, + "w": 2 + }, + { + "x": 7.5, + "y": 3, + "w": 2 + }, + { + "label": "Raise", + "x": 9.5, + "y": 3 + }, + { + "label": "Menu", + "x": 10.5, + "y": 3, + "w": 1.25 + }, + { + "label": "\u2190", + "x": 11.75, + "y": 3 + }, + { + "label": "\u2193", + "x": 12.75, + "y": 3 + }, + { + "label": "\u2192", + "x": 13.75, + "y": 3 + }, + { + "label": "_", + "x": 12.75, + "y": 0 + } + ] + } + } +} diff --git a/keyboards/treadstone48/rev1/matrix.c b/keyboards/treadstone48/rev1/matrix.c new file mode 100644 index 00000000000..8685a8125e4 --- /dev/null +++ b/keyboards/treadstone48/rev1/matrix.c @@ -0,0 +1,357 @@ +/* +Copyright 2012 Jun Wako + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +/* + * scan matrix + */ +#include +#include +#include +#include +#include +#include +#include +#include "print.h" +#include "debug.h" +#include "util.h" +#include "matrix.h" +#include "split_util.h" +#include "pro_micro.h" + +#ifdef USE_MATRIX_I2C +# include "i2c.h" +#else // USE_SERIAL +# include "split_scomm.h" +#endif + +#ifndef DEBOUNCE +# define DEBOUNCE 5 +#endif + +#define ERROR_DISCONNECT_COUNT 5 + +static uint8_t debouncing = DEBOUNCE; +static const int ROWS_PER_HAND = MATRIX_ROWS/2; +static uint8_t error_count = 0; +uint8_t is_master = 0 ; + +static const uint8_t row_pins[MATRIX_ROWS] = MATRIX_ROW_PINS; +static const uint8_t col_pins[MATRIX_COLS] = MATRIX_COL_PINS; + +/* matrix state(1:on, 0:off) */ +static matrix_row_t matrix[MATRIX_ROWS]; +static matrix_row_t matrix_debouncing[MATRIX_ROWS]; + +static matrix_row_t read_cols(void); +static void init_cols(void); +static void unselect_rows(void); +static void select_row(uint8_t row); +static uint8_t matrix_master_scan(void); + + +__attribute__ ((weak)) +void matrix_init_kb(void) { + matrix_init_user(); +} + +__attribute__ ((weak)) +void matrix_scan_kb(void) { + matrix_scan_user(); +} + +__attribute__ ((weak)) +void matrix_init_user(void) { +} + +__attribute__ ((weak)) +void matrix_scan_user(void) { +} + +inline +uint8_t matrix_rows(void) +{ + return MATRIX_ROWS; +} + +inline +uint8_t matrix_cols(void) +{ + return MATRIX_COLS; +} + +void matrix_init(void) +{ + debug_enable = true; + debug_matrix = true; + debug_mouse = true; + // initialize row and col + unselect_rows(); + init_cols(); + + TX_RX_LED_INIT; + TXLED0; + RXLED0; + + // initialize matrix state: all keys off + for (uint8_t i=0; i < MATRIX_ROWS; i++) { + matrix[i] = 0; + matrix_debouncing[i] = 0; + } + + is_master = has_usb(); + + matrix_init_quantum(); +} + +uint8_t _matrix_scan(void) +{ + // Right hand is stored after the left in the matirx so, we need to offset it + int offset = isLeftHand ? 0 : (ROWS_PER_HAND); + + for (uint8_t i = 0; i < ROWS_PER_HAND; i++) { + select_row(i); + _delay_us(30); // without this wait read unstable value. + matrix_row_t cols = read_cols(); + if (matrix_debouncing[i+offset] != cols) { + matrix_debouncing[i+offset] = cols; + debouncing = DEBOUNCE; + } + unselect_rows(); + } + + if (debouncing) { + if (--debouncing) { + _delay_ms(1); + } else { + for (uint8_t i = 0; i < ROWS_PER_HAND; i++) { + matrix[i+offset] = matrix_debouncing[i+offset]; + } + } + } + + return 1; +} + +#ifdef USE_MATRIX_I2C + +// Get rows from other half over i2c +int i2c_transaction(void) { + int slaveOffset = (isLeftHand) ? (ROWS_PER_HAND) : 0; + + int err = i2c_master_start(SLAVE_I2C_ADDRESS + I2C_WRITE); + if (err) goto i2c_error; + + // start of matrix stored at 0x00 + err = i2c_master_write(0x00); + if (err) goto i2c_error; + + // Start read + err = i2c_master_start(SLAVE_I2C_ADDRESS + I2C_READ); + if (err) goto i2c_error; + + if (!err) { + int i; + for (i = 0; i < ROWS_PER_HAND-1; ++i) { + matrix[slaveOffset+i] = i2c_master_read(I2C_ACK); + } + matrix[slaveOffset+i] = i2c_master_read(I2C_NACK); + i2c_master_stop(); + } else { +i2c_error: // the cable is disconnceted, or something else went wrong + i2c_reset_state(); + return err; + } + + return 0; +} + +#else // USE_SERIAL + +int serial_transaction(int master_changed) { + int slaveOffset = (isLeftHand) ? (ROWS_PER_HAND) : 0; +#ifdef SERIAL_USE_MULTI_TRANSACTION + int ret=serial_update_buffers(master_changed); +#else + int ret=serial_update_buffers(); +#endif + if (ret ) { + if(ret==2) RXLED1; + return 1; + } + RXLED0; + memcpy(&matrix[slaveOffset], + (void *)serial_slave_buffer, sizeof(serial_slave_buffer)); + return 0; +} +#endif + +uint8_t matrix_scan(void) +{ + if (is_master) { + matrix_master_scan(); + }else{ + matrix_slave_scan(); + int offset = (isLeftHand) ? ROWS_PER_HAND : 0; + memcpy(&matrix[offset], + (void *)serial_master_buffer, sizeof(serial_master_buffer)); + matrix_scan_quantum(); + } + return 1; +} + + +uint8_t matrix_master_scan(void) { + + int ret = _matrix_scan(); + int mchanged = 1; + + int offset = (isLeftHand) ? 0 : ROWS_PER_HAND; + +#ifdef USE_MATRIX_I2C +// for (int i = 0; i < ROWS_PER_HAND; ++i) { + /* i2c_slave_buffer[i] = matrix[offset+i]; */ +// i2c_slave_buffer[i] = matrix[offset+i]; +// } +#else // USE_SERIAL + #ifdef SERIAL_USE_MULTI_TRANSACTION + mchanged = memcmp((void *)serial_master_buffer, + &matrix[offset], sizeof(serial_master_buffer)); + #endif + memcpy((void *)serial_master_buffer, + &matrix[offset], sizeof(serial_master_buffer)); +#endif + +#ifdef USE_MATRIX_I2C + if( i2c_transaction() ) { +#else // USE_SERIAL + if( serial_transaction(mchanged) ) { +#endif + // turn on the indicator led when halves are disconnected + TXLED1; + + error_count++; + + if (error_count > ERROR_DISCONNECT_COUNT) { + // reset other half if disconnected + int slaveOffset = (isLeftHand) ? (ROWS_PER_HAND) : 0; + for (int i = 0; i < ROWS_PER_HAND; ++i) { + matrix[slaveOffset+i] = 0; + } + } + } else { + // turn off the indicator led on no error + TXLED0; + error_count = 0; + } + matrix_scan_quantum(); + return ret; +} + +void matrix_slave_scan(void) { + _matrix_scan(); + + int offset = (isLeftHand) ? 0 : ROWS_PER_HAND; + +#ifdef USE_MATRIX_I2C + for (int i = 0; i < ROWS_PER_HAND; ++i) { + /* i2c_slave_buffer[i] = matrix[offset+i]; */ + i2c_slave_buffer[i] = matrix[offset+i]; + } +#else // USE_SERIAL + #ifdef SERIAL_USE_MULTI_TRANSACTION + int change = 0; + #endif + for (int i = 0; i < ROWS_PER_HAND; ++i) { + #ifdef SERIAL_USE_MULTI_TRANSACTION + if( serial_slave_buffer[i] != matrix[offset+i] ) + change = 1; + #endif + serial_slave_buffer[i] = matrix[offset+i]; + } + #ifdef SERIAL_USE_MULTI_TRANSACTION + slave_buffer_change_count += change; + #endif +#endif +} + +bool matrix_is_modified(void) +{ + if (debouncing) return false; + return true; +} + +inline +bool matrix_is_on(uint8_t row, uint8_t col) +{ + return (matrix[row] & ((matrix_row_t)1<> 4) + 1) &= ~_BV(col_pins[x] & 0xF); + _SFR_IO8((col_pins[x] >> 4) + 2) |= _BV(col_pins[x] & 0xF); + } +} + +static matrix_row_t read_cols(void) +{ + matrix_row_t result = 0; + for(int x = 0; x < MATRIX_COLS; x++) { + result |= (_SFR_IO8(col_pins[x] >> 4) & _BV(col_pins[x] & 0xF)) ? 0 : (1 << x); + } + return result; +} + +static void unselect_rows(void) +{ + for(int x = 0; x < ROWS_PER_HAND; x++) { + _SFR_IO8((row_pins[x] >> 4) + 1) &= ~_BV(row_pins[x] & 0xF); + _SFR_IO8((row_pins[x] >> 4) + 2) |= _BV(row_pins[x] & 0xF); + } +} + +static void select_row(uint8_t row) +{ + _SFR_IO8((row_pins[row] >> 4) + 1) |= _BV(row_pins[row] & 0xF); + _SFR_IO8((row_pins[row] >> 4) + 2) &= ~_BV(row_pins[row] & 0xF); +} diff --git a/keyboards/treadstone48/rev1/rev1.c b/keyboards/treadstone48/rev1/rev1.c new file mode 100644 index 00000000000..2637864271a --- /dev/null +++ b/keyboards/treadstone48/rev1/rev1.c @@ -0,0 +1,15 @@ +#include "treadstone48.h" + + +#ifdef SSD1306OLED +void led_set_kb(uint8_t usb_led) { + // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here + //led_set_user(usb_led); +} +#endif + +void matrix_init_kb(void) { + + matrix_init_user(); +}; + diff --git a/keyboards/treadstone48/rev1/rev1.h b/keyboards/treadstone48/rev1/rev1.h new file mode 100644 index 00000000000..c6145398dd8 --- /dev/null +++ b/keyboards/treadstone48/rev1/rev1.h @@ -0,0 +1,202 @@ +#ifndef REV1_H +#define REV1_CONFIG_H + +#include "../treadstone48.h" + +//void promicro_bootloader_jmp(bool program); +#include "quantum.h" + +#ifdef RGBLIGHT_ENABLE +//rgb led driver +#include "ws2812.h" +#endif + +#ifdef USE_I2C +#include +#ifdef __AVR__ + #include + #include +#endif +#endif + +// full Keymap +// (TRRS jack on the left half is to the right, TRRS jack on the right half is to the left) +#define LAYOUT_full( \ + L00, L01, L02, L03, L04, L05, L40, L41, L42, L43, L44, L45, R00, R01, R02, R03, R04, R05, R40, R41, R42, R43, R44, R45, \ + L10, L11, L12, L13, L14, L15, L50, L51, L52, L53, L54, L55, R10, R11, R12, R13, R14, R15, R50, R51, R52, R53, R54, R55, \ + L20, L21, L22, L23, L24, L25, L60, L61, L62, L63, L64, L65, R20, R21, R22, R23, R24, R25, R60, R61, R62, R63, R64, R65, \ + L30, L31, L32, L33, L34, L35, L70, L71, L72, L73, L74, L75, R30, R31, R32, R33, R34, R35, R70, R71, R72, R73, R74, R75 \ + ) \ + { \ + { L45, L44, L43, L42, L41, L40 }, \ + { L55, L54, L53, L52, L51, L50 }, \ + { L65, L64, L63, L62, L61, L60 }, \ + { L75, L74, L73, L72, L71, L70 }, \ + { L05, L04, L03, L02, L01, L00 }, \ + { L15, L14, L13, L12, L11, L10 }, \ + { L25, L24, L23, L22, L21, L20 }, \ + { L35, L34, L33, L32, L31, L30 }, \ + { R45, R44, R43, R42, R41, R40 }, \ + { R55, R54, R53, R52, R51, R50 }, \ + { R65, R64, R63, R62, R61, R60 }, \ + { R75, R74, R73, R72, R71, R70 }, \ + { R05, R04, R03, R02, R01, R00 }, \ + { R15, R14, R13, R12, R11, R10 }, \ + { R25, R24, R23, R22, R21, R20 }, \ + { R35, R34, R33, R32, R31, R30 }, \ + } + +#define K_N KC_NO + +////////////////////////////////////////////////////////////////////////////// +// When only use Treadstone48. +// L75 is ExtraKey +////////////////////////////////////////////////////////////////////////////// +#define LAYOUT_base( \ + L00, L01, L02, L03, L04, L05, L40, L41, L42, L43, L44, L45, \ + L10, L11, L12, L13, L14, L15, L50, L51, L52, L53, L54, L55, \ + L20, L21, L22, L23, L24, L25, L60, L61, L62, L63, L64, L65, \ + L30, L31, L32, L33, L34, L35, L70, L71, L72, L73, L74, L75 \ + ) \ + LAYOUT_full( \ + L00, L01, L02, L03, L04, L05, L40, L41, L42, L43, L44, L45, K_N, K_N, K_N, K_N, K_N, K_N, K_N, K_N, K_N, K_N, K_N, K_N, \ + L10, L11, L12, L13, L14, L15, L50, L51, L52, L53, L54, L55, K_N, K_N, K_N, K_N, K_N, K_N, K_N, K_N, K_N, K_N, K_N, K_N, \ + L20, L21, L22, L23, L24, L25, L60, L61, L62, L63, L64, L65, K_N, K_N, K_N, K_N, K_N, K_N, K_N, K_N, K_N, K_N, K_N, K_N, \ + L30, L31, L32, L33, L34, L35, L70, L71, L72, L73, L74, L75, K_N, K_N, K_N, K_N, K_N, K_N, K_N, K_N, K_N, K_N, K_N, K_N \ + ) + +// Used to create a keymap using only KC_ prefixed keys +#define LAYOUT_base_kc( \ + L00, L01, L02, L03, L04, L05, L40, L41, L42, L43, L44, L45, \ + L10, L11, L12, L13, L14, L15, L50, L51, L52, L53, L54, L55, \ + L20, L21, L22, L23, L24, L25, L60, L61, L62, L63, L64, L65, \ + L30, L31, L32, L33, L34, L35, L70, L71, L72, L73, L74, L75 \ + ) \ + LAYOUT_base( \ + KC_##L00, KC_##L01, KC_##L02, KC_##L03, KC_##L04, KC_##L05, KC_##L40, KC_##L41, KC_##L42, KC_##L43, KC_##L44, KC_##L45, \ + KC_##L10, KC_##L11, KC_##L12, KC_##L13, KC_##L14, KC_##L15, KC_##L50, KC_##L51, KC_##L52, KC_##L53, KC_##L54, KC_##L55, \ + KC_##L20, KC_##L21, KC_##L22, KC_##L23, KC_##L24, KC_##L25, KC_##L60, KC_##L61, KC_##L62, KC_##L63, KC_##L64, KC_##L65, \ + KC_##L30, KC_##L31, KC_##L32, KC_##L33, KC_##L34, KC_##L35, KC_##L70, KC_##L71, KC_##L72, KC_##L73, KC_##L74, KC_##L75 \ + ) +////////////////////////////////////////////////////////////////////////////// + + +////////////////////////////////////////////////////////////////////////////// +// When connecting Rhymestone to Treadstone48. +// L75 is ExtraKey +////////////////////////////////////////////////////////////////////////////// +#define LAYOUT_rs( \ + L00, L01, L02, L03, L04, L05, L40, L41, L42, L43, L44, L45, R40, R41, R42, R43, R44, \ + L10, L11, L12, L13, L14, L15, L50, L51, L52, L53, L54, L55, R50, R51, R52, R53, R54, \ + L20, L21, L22, L23, L24, L25, L60, L61, L62, L63, L64, L65, R60, R61, R62, R63, R64, \ + L30, L31, L32, L33, L34, L35, L70, L71, L72, L73, L74, R70, R71, R72, R73, R74, L75 \ + ) \ + LAYOUT_full( \ + L00, L01, L02, L03, L04, L05, L40, L41, L42, L43, L44, L45, K_N, K_N, K_N, K_N, K_N, K_N, K_N, R44, R43, R42, R41, R40, \ + L10, L11, L12, L13, L14, L15, L50, L51, L52, L53, L54, L55, K_N, K_N, K_N, K_N, K_N, K_N, K_N, R54, R53, R52, R51, R50, \ + L20, L21, L22, L23, L24, L25, L60, L61, L62, L63, L64, L65, K_N, K_N, K_N, K_N, K_N, K_N, K_N, R64, R63, R62, R61, R60, \ + L30, L31, L32, L33, L34, L35, L70, L71, L72, L73, L74, L75, K_N, K_N, K_N, K_N, K_N, K_N, K_N, R74, R73, R72, R71, R70 \ + ) + +// When use right hand side of the Rhymestone. +#ifdef RHYMESTONE_RIGHTHAND +#undef LAYOUT_rs +#define LAYOUT_rs( \ + L00, L01, L02, L03, L04, L05, L40, L41, L42, L43, L44, L45, R40, R41, R42, R43, R44, \ + L10, L11, L12, L13, L14, L15, L50, L51, L52, L53, L54, L55, R50, R51, R52, R53, R54, \ + L20, L21, L22, L23, L24, L25, L60, L61, L62, L63, L64, L65, R60, R61, R62, R63, R64, \ + L30, L31, L32, L33, L34, L35, L70, L71, L72, L73, L74, R70, R71, R72, R73, R74, L75 \ + ) \ + LAYOUT_full( \ + L00, L01, L02, L03, L04, L05, L40, L41, L42, L43, L44, L45, K_N, K_N, K_N, K_N, K_N, K_N, K_N, R40, R41, R42, R43, R44, \ + L10, L11, L12, L13, L14, L15, L50, L51, L52, L53, L54, L55, K_N, K_N, K_N, K_N, K_N, K_N, K_N, R50, R51, R52, R53, R54, \ + L20, L21, L22, L23, L24, L25, L60, L61, L62, L63, L64, L65, K_N, K_N, K_N, K_N, K_N, K_N, K_N, R60, R61, R62, R63, R64, \ + L30, L31, L32, L33, L34, L35, L70, L71, L72, L73, L74, L75, K_N, K_N, K_N, K_N, K_N, K_N, K_N, R70, R71, R72, R73, R74 \ + ) +#endif + +// Used to create a keymap using only KC_ prefixed keys +#define LAYOUT_rs_kc( \ + L00, L01, L02, L03, L04, L05, L40, L41, L42, L43, L44, L45, R40, R41, R42, R43, R44, \ + L10, L11, L12, L13, L14, L15, L50, L51, L52, L53, L54, L55, R50, R51, R52, R53, R54, \ + L20, L21, L22, L23, L24, L25, L60, L61, L62, L63, L64, L65, R60, R61, R62, R63, R64, \ + L30, L31, L32, L33, L34, L35, L70, L71, L72, L73, L74, L75, R70, R71, R72, R73, R74 \ + ) \ + LAYOUT_rs( \ + KC_##L00, KC_##L01, KC_##L02, KC_##L03, KC_##L04, KC_##L05, KC_##L40, KC_##L41, KC_##L42, KC_##L43, KC_##L44, KC_##L45, KC_##R40, KC_##R41, KC_##R42, KC_##R43, KC_##R44, \ + KC_##L10, KC_##L11, KC_##L12, KC_##L13, KC_##L14, KC_##L15, KC_##L50, KC_##L51, KC_##L52, KC_##L53, KC_##L54, KC_##L55, KC_##R50, KC_##R51, KC_##R52, KC_##R53, KC_##R54, \ + KC_##L20, KC_##L21, KC_##L22, KC_##L23, KC_##L24, KC_##L25, KC_##L60, KC_##L61, KC_##L62, KC_##L63, KC_##L64, KC_##L65, KC_##R60, KC_##R61, KC_##R62, KC_##R63, KC_##R64, \ + KC_##L30, KC_##L31, KC_##L32, KC_##L33, KC_##L34, KC_##L35, KC_##L70, KC_##L71, KC_##L72, KC_##L73, KC_##L74, KC_##L75, KC_##R70, KC_##R71, KC_##R72, KC_##R73, KC_##R74 \ + ) +////////////////////////////////////////////////////////////////////////////// + + + +////////////////////////////////////////////////////////////////////////////// +// Alpha version keymap. +// L30 is ExtraKey +////////////////////////////////////////////////////////////////////////////// +#ifdef ANGELINA_KEYMAP +#undef LAYOUT_base +#undef LAYOUT_base_kc +#undef LAYOUT_rs +#undef LAYOUT_rs_kc + +#define LAYOUT_base( \ + L00, L01, L02, L03, L04, L05, L40, L41, L42, L43, L44, L45, \ + L10, L11, L12, L13, L14, L15, L50, L51, L52, L53, L54, L55, \ + L20, L21, L22, L23, L24, L25, L60, L61, L62, L63, L64, L65, \ + L31, L32, L33, L34, L35, L70, L71, L72, L73, L74, L75, L30 \ + ) \ + LAYOUT_full( \ + L00, L01, L02, L03, L04, L05, L40, L41, L42, L43, L44, L45, K_N, K_N, K_N, K_N, K_N, K_N, K_N, K_N, K_N, K_N, K_N, K_N, \ + L10, L11, L12, L13, L14, L15, L50, L51, L52, L53, L54, L55, K_N, K_N, K_N, K_N, K_N, K_N, K_N, K_N, K_N, K_N, K_N, K_N, \ + L20, L21, L22, L23, L24, L25, L60, L61, L62, L63, L64, L65, K_N, K_N, K_N, K_N, K_N, K_N, K_N, K_N, K_N, K_N, K_N, K_N, \ + L30, L31, L32, L33, L34, L35, L70, L71, L72, L73, L74, L75, K_N, K_N, K_N, K_N, K_N, K_N, K_N, K_N, K_N, K_N, K_N, K_N \ + ) + +// Used to create a keymap using only KC_ prefixed keys +#define LAYOUT_base_kc( \ + L00, L01, L02, L03, L04, L05, L40, L41, L42, L43, L44, L45, \ + L10, L11, L12, L13, L14, L15, L50, L51, L52, L53, L54, L55, \ + L20, L21, L22, L23, L24, L25, L60, L61, L62, L63, L64, L65, \ + L30, L31, L32, L33, L34, L35, L70, L71, L72, L73, L74, L75 \ + ) \ + LAYOUT_base( \ + KC_##L00, KC_##L01, KC_##L02, KC_##L03, KC_##L04, KC_##L05, KC_##L40, KC_##L41, KC_##L42, KC_##L43, KC_##L44, KC_##L45, \ + KC_##L10, KC_##L11, KC_##L12, KC_##L13, KC_##L14, KC_##L15, KC_##L50, KC_##L51, KC_##L52, KC_##L53, KC_##L54, KC_##L55, \ + KC_##L20, KC_##L21, KC_##L22, KC_##L23, KC_##L24, KC_##L25, KC_##L60, KC_##L61, KC_##L62, KC_##L63, KC_##L64, KC_##L65, \ + KC_##L30, KC_##L31, KC_##L32, KC_##L33, KC_##L34, KC_##L35, KC_##L70, KC_##L71, KC_##L72, KC_##L73, KC_##L74, KC_##L75 \ + ) + +#define LAYOUT_rs( \ + L00, L01, L02, L03, L04, L05, L40, L41, L42, L43, L44, L45, R40, R41, R42, R43, R44, \ + L10, L11, L12, L13, L14, L15, L50, L51, L52, L53, L54, L55, R50, R51, R52, R53, R54, \ + L20, L21, L22, L23, L24, L25, L60, L61, L62, L63, L64, L65, R60, R61, R62, R63, R64, \ + L31, L32, L33, L34, L35, L70, L71, L72, L73, L74, L75, R70, R71, R72, R73, R74, L30 \ + ) \ + LAYOUT_full( \ + L00, L01, L02, L03, L04, L05, L40, L41, L42, L43, L44, L45, K_N, K_N, K_N, K_N, K_N, K_N, K_N, R44, R43, R42, R41, R40, \ + L10, L11, L12, L13, L14, L15, L50, L51, L52, L53, L54, L55, K_N, K_N, K_N, K_N, K_N, K_N, K_N, R54, R53, R52, R51, R50, \ + L20, L21, L22, L23, L24, L25, L60, L61, L62, L63, L64, L65, K_N, K_N, K_N, K_N, K_N, K_N, K_N, R64, R63, R62, R61, R60, \ + L30, L31, L32, L33, L34, L35, L70, L71, L72, L73, L74, L75, K_N, K_N, K_N, K_N, K_N, K_N, K_N, R74, R73, R72, R71, R70 \ + ) + +// Used to create a keymap using only KC_ prefixed keys +#define LAYOUT_rs_kc( \ + L00, L01, L02, L03, L04, L05, L40, L41, L42, L43, L44, L45, R40, R41, R42, R43, R44, \ + L10, L11, L12, L13, L14, L15, L50, L51, L52, L53, L54, L55, R50, R51, R52, R53, R54, \ + L20, L21, L22, L23, L24, L25, L60, L61, L62, L63, L64, L65, R60, R61, R62, R63, R64, \ + L30, L31, L32, L33, L34, L35, L70, L71, L72, L73, L74, L75, R70, R71, R72, R73, R74 \ + ) \ + LAYOUT_rs( \ + KC_##L00, KC_##L01, KC_##L02, KC_##L03, KC_##L04, KC_##L05, KC_##L40, KC_##L41, KC_##L42, KC_##L43, KC_##L44, KC_##L45, KC_##R40, KC_##R41, KC_##R42, KC_##R43, KC_##R44, \ + KC_##L10, KC_##L11, KC_##L12, KC_##L13, KC_##L14, KC_##L15, KC_##L50, KC_##L51, KC_##L52, KC_##L53, KC_##L54, KC_##L55, KC_##R50, KC_##R51, KC_##R52, KC_##R53, KC_##R54, \ + KC_##L20, KC_##L21, KC_##L22, KC_##L23, KC_##L24, KC_##L25, KC_##L60, KC_##L61, KC_##L62, KC_##L63, KC_##L64, KC_##L65, KC_##R60, KC_##R61, KC_##R62, KC_##R63, KC_##R64, \ + KC_##L30, KC_##L31, KC_##L32, KC_##L33, KC_##L34, KC_##L35, KC_##L70, KC_##L71, KC_##L72, KC_##L73, KC_##L74, KC_##L75, KC_##R70, KC_##R71, KC_##R72, KC_##R73, KC_##R74 \ + ) + +#endif +////////////////////////////////////////////////////////////////////////////// + +#endif diff --git a/keyboards/treadstone48/rev1/rules.mk b/keyboards/treadstone48/rev1/rules.mk new file mode 100644 index 00000000000..6028b5a5b95 --- /dev/null +++ b/keyboards/treadstone48/rev1/rules.mk @@ -0,0 +1,3 @@ +SRC += rev1/matrix.c +SRC += rev1/split_util.c +SRC += rev1/split_scomm.c diff --git a/keyboards/treadstone48/rev1/serial_config.h b/keyboards/treadstone48/rev1/serial_config.h new file mode 100644 index 00000000000..37135213d55 --- /dev/null +++ b/keyboards/treadstone48/rev1/serial_config.h @@ -0,0 +1,8 @@ +//// #error rev2 serial config + +#ifndef SOFT_SERIAL_PIN +/* Soft Serial defines */ +#define SOFT_SERIAL_PIN D2 + +#define SERIAL_USE_MULTI_TRANSACTION +#endif diff --git a/keyboards/treadstone48/rev1/serial_config_simpleapi.h b/keyboards/treadstone48/rev1/serial_config_simpleapi.h new file mode 100644 index 00000000000..e2d22a41e7b --- /dev/null +++ b/keyboards/treadstone48/rev1/serial_config_simpleapi.h @@ -0,0 +1,8 @@ +#ifndef SERIAL_CONFIG_SIMPLEAPI_H +#define SERIAL_CONFIG_SIMPLEAPI_H + +#undef SERIAL_USE_MULTI_TRANSACTION +#define SERIAL_SLAVE_BUFFER_LENGTH MATRIX_ROWS/2 +#define SERIAL_MASTER_BUFFER_LENGTH MATRIX_ROWS/2 + +#endif // SERIAL_CONFIG_SIMPLEAPI_H diff --git a/keyboards/treadstone48/rev1/split_scomm.c b/keyboards/treadstone48/rev1/split_scomm.c new file mode 100644 index 00000000000..ada7867960b --- /dev/null +++ b/keyboards/treadstone48/rev1/split_scomm.c @@ -0,0 +1,92 @@ +#ifdef USE_SERIAL +#ifdef SERIAL_USE_MULTI_TRANSACTION +/* --- USE flexible API (using multi-type transaction function) --- */ + +#include +#include +#include +#include +#include "serial.h" +#ifdef CONSOLE_ENABLE + #include +#endif + +uint8_t volatile serial_slave_buffer[SERIAL_SLAVE_BUFFER_LENGTH] = {0}; +uint8_t volatile serial_master_buffer[SERIAL_MASTER_BUFFER_LENGTH] = {0}; +uint8_t volatile status_com = 0; +uint8_t volatile status1 = 0; +uint8_t slave_buffer_change_count = 0; +uint8_t s_change_old = 0xff; +uint8_t s_change_new = 0xff; + +SSTD_t transactions[] = { +#define GET_SLAVE_STATUS 0 + /* master buffer not changed, only recive slave_buffer_change_count */ + { (uint8_t *)&status_com, + 0, NULL, + sizeof(slave_buffer_change_count), &slave_buffer_change_count, + }, +#define PUT_MASTER_GET_SLAVE_STATUS 1 + /* master buffer changed need send, and recive slave_buffer_change_count */ + { (uint8_t *)&status_com, + sizeof(serial_master_buffer), (uint8_t *)serial_master_buffer, + sizeof(slave_buffer_change_count), &slave_buffer_change_count, + }, +#define GET_SLAVE_BUFFER 2 + /* recive serial_slave_buffer */ + { (uint8_t *)&status1, + 0, NULL, + sizeof(serial_slave_buffer), (uint8_t *)serial_slave_buffer + } +}; + +void serial_master_init(void) +{ + soft_serial_initiator_init(transactions, TID_LIMIT(transactions)); +} + +void serial_slave_init(void) +{ + soft_serial_target_init(transactions, TID_LIMIT(transactions)); +} + +// 0 => no error +// 1 => slave did not respond +// 2 => checksum error +int serial_update_buffers(int master_update) +{ + int status, smatstatus; + static int need_retry = 0; + + if( s_change_old != s_change_new ) { + smatstatus = soft_serial_transaction(GET_SLAVE_BUFFER); + if( smatstatus == TRANSACTION_END ) { + s_change_old = s_change_new; +#ifdef CONSOLE_ENABLE + uprintf("slave matrix = %b %b %b %b %b\n", + serial_slave_buffer[0], serial_slave_buffer[1], + serial_slave_buffer[2], serial_slave_buffer[3], + serial_slave_buffer[4] ); +#endif + } + } else { + // serial_slave_buffer dosen't change + smatstatus = TRANSACTION_END; // dummy status + } + + if( !master_update && !need_retry) { + status = soft_serial_transaction(GET_SLAVE_STATUS); + } else { + status = soft_serial_transaction(PUT_MASTER_GET_SLAVE_STATUS); + } + if( status == TRANSACTION_END ) { + s_change_new = slave_buffer_change_count; + need_retry = 0; + } else { + need_retry = 1; + } + return smatstatus; +} + +#endif // SERIAL_USE_MULTI_TRANSACTION +#endif /* USE_SERIAL */ diff --git a/keyboards/treadstone48/rev1/split_scomm.h b/keyboards/treadstone48/rev1/split_scomm.h new file mode 100644 index 00000000000..16887eb74f7 --- /dev/null +++ b/keyboards/treadstone48/rev1/split_scomm.h @@ -0,0 +1,21 @@ +#pragma once + +#ifndef SERIAL_USE_MULTI_TRANSACTION +/* --- USE Simple API (OLD API, compatible with let's split serial.c) --- */ +#include "serial.h" + +#else +/* --- USE flexible API (using multi-type transaction function) --- */ +// Buffers for master - slave communication +#define SERIAL_SLAVE_BUFFER_LENGTH MATRIX_ROWS/2 +#define SERIAL_MASTER_BUFFER_LENGTH MATRIX_ROWS/2 + +extern volatile uint8_t serial_slave_buffer[SERIAL_SLAVE_BUFFER_LENGTH]; +extern volatile uint8_t serial_master_buffer[SERIAL_MASTER_BUFFER_LENGTH]; +extern uint8_t slave_buffer_change_count; + +void serial_master_init(void); +void serial_slave_init(void); +int serial_update_buffers(int master_changed); + +#endif diff --git a/keyboards/treadstone48/rev1/split_util.c b/keyboards/treadstone48/rev1/split_util.c new file mode 100644 index 00000000000..e1ff8b4379d --- /dev/null +++ b/keyboards/treadstone48/rev1/split_util.c @@ -0,0 +1,70 @@ +#include +#include +#include +#include +#include +#include +#include "split_util.h" +#include "matrix.h" +#include "keyboard.h" + +#ifdef USE_MATRIX_I2C +# include "i2c.h" +#else +# include "split_scomm.h" +#endif + +volatile bool isLeftHand = true; + +static void setup_handedness(void) { + #ifdef EE_HANDS + isLeftHand = eeprom_read_byte(EECONFIG_HANDEDNESS); + #else + // I2C_MASTER_RIGHT is deprecated, use MASTER_RIGHT instead, since this works for both serial and i2c + #if defined(I2C_MASTER_RIGHT) || defined(MASTER_RIGHT) + isLeftHand = !has_usb(); + #else + isLeftHand = has_usb(); + #endif + #endif +} + +static void keyboard_master_setup(void) { + +#ifdef USE_MATRIX_I2C + i2c_master_init(); +#else + serial_master_init(); +#endif +} + +static void keyboard_slave_setup(void) { + +#ifdef USE_MATRIX_I2C + i2c_slave_init(SLAVE_I2C_ADDRESS); +#else + serial_slave_init(); +#endif +} + +bool has_usb(void) { + USBCON |= (1 << OTGPADE); //enables VBUS pad + _delay_us(5); + return (USBSTA & (1< +#include "eeconfig.h" + +#define SLAVE_I2C_ADDRESS 0x32 + +extern volatile bool isLeftHand; + +// slave version of matix scan, defined in matrix.c +void matrix_slave_scan(void); + +void split_keyboard_setup(void); +bool has_usb(void); + +void matrix_master_OLED_init (void); diff --git a/keyboards/treadstone48/rules.mk b/keyboards/treadstone48/rules.mk new file mode 100644 index 00000000000..6ddbdaf80eb --- /dev/null +++ b/keyboards/treadstone48/rules.mk @@ -0,0 +1,73 @@ +SRC += i2c.c +SRC += serial.c +SRC += ssd1306.c + +# MCU name +#MCU = at90usb1287 +MCU = atmega32u4 + +# Processor frequency. +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to +# calculate timings. Do NOT tack on a 'UL' at the end, this will be done +# automatically to create a 32-bit value in your source code. +# +# This will be an integer division of F_USB below, as it is sourced by +# F_USB after it has run through any CPU prescalers. Note that this value +# does not *change* the processor frequency - it should merely be updated to +# reflect the processor speed set externally so that the code can use accurate +# software delays. +F_CPU = 16000000 + +# +# LUFA specific +# +# Target architecture (see library "Board Types" documentation). +ARCH = AVR8 + +# Input clock frequency. +# This will define a symbol, F_USB, in all source code files equal to the +# input clock frequency (before any prescaling is performed) in Hz. This value may +# differ from F_CPU if prescaling is used on the latter, and is required as the +# raw input clock is fed directly to the PLL sections of the AVR for high speed +# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' +# at the end, this will be done automatically to create a 32-bit value in your +# source code. +# +# If no clock division is performed on the input clock inside the AVR (via the +# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. +F_USB = $(F_CPU) + +# Bootloader +# This definition is optional, and if your keyboard supports multiple bootloaders of +# different sizes, comment this out, and the correct address will be loaded +# automatically (+60). See bootloader.mk for all options. +BOOTLOADER = caterina + +# Interrupt driven control endpoint task(+60) +OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT + +# Build Options +# change to "no" to disable the options, or define them in the Makefile in +# the appropriate keymap folder that will get included automatically +# +BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = no # Mouse keys(+4700) +EXTRAKEY_ENABLE = no # Audio control and System control(+450) +CONSOLE_ENABLE = no # Console for debug(+400) +COMMAND_ENABLE = no # Commands for debug and configuration +NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +MIDI_ENABLE = no # MIDI controls +AUDIO_ENABLE = no # Audio output on port C6 +UNICODE_ENABLE = no # Unicode +BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID +RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. +SUBPROJECT_rev1 = no +USE_I2C = yes +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend + +CUSTOM_MATRIX = yes + +DEFAULT_FOLDER = treadstone48/rev1 diff --git a/keyboards/treadstone48/serial.c b/keyboards/treadstone48/serial.c new file mode 100644 index 00000000000..6006ebf1bdb --- /dev/null +++ b/keyboards/treadstone48/serial.c @@ -0,0 +1,590 @@ +/* + * WARNING: be careful changing this code, it is very timing dependent + * + * 2018-10-28 checked + * avr-gcc 4.9.2 + * avr-gcc 5.4.0 + * avr-gcc 7.3.0 + */ + +#ifndef F_CPU +#define F_CPU 16000000 +#endif + +#include +#include +#include +#include +#include +#include "serial.h" +//#include + +#ifdef SOFT_SERIAL_PIN + +#ifdef __AVR_ATmega32U4__ + // if using ATmega32U4 I2C, can not use PD0 and PD1 in soft serial. + #ifdef USE_I2C + #if SOFT_SERIAL_PIN == D0 || SOFT_SERIAL_PIN == D1 + #error Using ATmega32U4 I2C, so can not use PD0, PD1 + #endif + #endif + + #if SOFT_SERIAL_PIN >= D0 && SOFT_SERIAL_PIN <= D3 + #define SERIAL_PIN_DDR DDRD + #define SERIAL_PIN_PORT PORTD + #define SERIAL_PIN_INPUT PIND + #if SOFT_SERIAL_PIN == D0 + #define SERIAL_PIN_MASK _BV(PD0) + #define EIMSK_BIT _BV(INT0) + #define EICRx_BIT (~(_BV(ISC00) | _BV(ISC01))) + #define SERIAL_PIN_INTERRUPT INT0_vect + #elif SOFT_SERIAL_PIN == D1 + #define SERIAL_PIN_MASK _BV(PD1) + #define EIMSK_BIT _BV(INT1) + #define EICRx_BIT (~(_BV(ISC10) | _BV(ISC11))) + #define SERIAL_PIN_INTERRUPT INT1_vect + #elif SOFT_SERIAL_PIN == D2 + #define SERIAL_PIN_MASK _BV(PD2) + #define EIMSK_BIT _BV(INT2) + #define EICRx_BIT (~(_BV(ISC20) | _BV(ISC21))) + #define SERIAL_PIN_INTERRUPT INT2_vect + #elif SOFT_SERIAL_PIN == D3 + #define SERIAL_PIN_MASK _BV(PD3) + #define EIMSK_BIT _BV(INT3) + #define EICRx_BIT (~(_BV(ISC30) | _BV(ISC31))) + #define SERIAL_PIN_INTERRUPT INT3_vect + #endif + #elif SOFT_SERIAL_PIN == E6 + #define SERIAL_PIN_DDR DDRE + #define SERIAL_PIN_PORT PORTE + #define SERIAL_PIN_INPUT PINE + #define SERIAL_PIN_MASK _BV(PE6) + #define EIMSK_BIT _BV(INT6) + #define EICRx_BIT (~(_BV(ISC60) | _BV(ISC61))) + #define SERIAL_PIN_INTERRUPT INT6_vect + #else + #error invalid SOFT_SERIAL_PIN value + #endif + +#else + #error serial.c now support ATmega32U4 only +#endif + +//////////////// for backward compatibility //////////////////////////////// +#if !defined(SERIAL_USE_SINGLE_TRANSACTION) && !defined(SERIAL_USE_MULTI_TRANSACTION) +/* --- USE OLD API (compatible with let's split serial.c) */ + #if SERIAL_SLAVE_BUFFER_LENGTH > 0 + uint8_t volatile serial_slave_buffer[SERIAL_SLAVE_BUFFER_LENGTH] = {0}; + #endif + #if SERIAL_MASTER_BUFFER_LENGTH > 0 + uint8_t volatile serial_master_buffer[SERIAL_MASTER_BUFFER_LENGTH] = {0}; + #endif + uint8_t volatile status0 = 0; + +SSTD_t transactions[] = { + { (uint8_t *)&status0, + #if SERIAL_MASTER_BUFFER_LENGTH > 0 + sizeof(serial_master_buffer), (uint8_t *)serial_master_buffer, + #else + 0, (uint8_t *)NULL, + #endif + #if SERIAL_SLAVE_BUFFER_LENGTH > 0 + sizeof(serial_slave_buffer), (uint8_t *)serial_slave_buffer + #else + 0, (uint8_t *)NULL, + #endif + } +}; + +void serial_master_init(void) +{ soft_serial_initiator_init(transactions, TID_LIMIT(transactions)); } + +void serial_slave_init(void) +{ soft_serial_target_init(transactions, TID_LIMIT(transactions)); } + +// 0 => no error +// 1 => slave did not respond +// 2 => checksum error +int serial_update_buffers() +{ + int result; + result = soft_serial_transaction(); + return result; +} + +#endif // end of OLD API (compatible with let's split serial.c) +//////////////////////////////////////////////////////////////////////////// + +#define ALWAYS_INLINE __attribute__((always_inline)) +#define NO_INLINE __attribute__((noinline)) +#define _delay_sub_us(x) __builtin_avr_delay_cycles(x) + +// parity check +#define ODD_PARITY 1 +#define EVEN_PARITY 0 +#define PARITY EVEN_PARITY + +#ifdef SERIAL_DELAY + // custom setup in config.h + // #define TID_SEND_ADJUST 2 + // #define SERIAL_DELAY 6 // micro sec + // #define READ_WRITE_START_ADJUST 30 // cycles + // #define READ_WRITE_WIDTH_ADJUST 8 // cycles +#else +// ============ Standard setups ============ + +#ifndef SELECT_SOFT_SERIAL_SPEED +#define SELECT_SOFT_SERIAL_SPEED 1 +// 0: about 189kbps +// 1: about 137kbps (default) +// 2: about 75kbps +// 3: about 39kbps +// 4: about 26kbps +// 5: about 20kbps +#endif + +#if __GNUC__ < 6 + #define TID_SEND_ADJUST 14 +#else + #define TID_SEND_ADJUST 2 +#endif + +#if SELECT_SOFT_SERIAL_SPEED == 0 + // Very High speed + #define SERIAL_DELAY 4 // micro sec + #if __GNUC__ < 6 + #define READ_WRITE_START_ADJUST 33 // cycles + #define READ_WRITE_WIDTH_ADJUST 3 // cycles + #else + #define READ_WRITE_START_ADJUST 34 // cycles + #define READ_WRITE_WIDTH_ADJUST 7 // cycles + #endif +#elif SELECT_SOFT_SERIAL_SPEED == 1 + // High speed + #define SERIAL_DELAY 6 // micro sec + #if __GNUC__ < 6 + #define READ_WRITE_START_ADJUST 30 // cycles + #define READ_WRITE_WIDTH_ADJUST 3 // cycles + #else + #define READ_WRITE_START_ADJUST 33 // cycles + #define READ_WRITE_WIDTH_ADJUST 7 // cycles + #endif +#elif SELECT_SOFT_SERIAL_SPEED == 2 + // Middle speed + #define SERIAL_DELAY 12 // micro sec + #define READ_WRITE_START_ADJUST 30 // cycles + #if __GNUC__ < 6 + #define READ_WRITE_WIDTH_ADJUST 3 // cycles + #else + #define READ_WRITE_WIDTH_ADJUST 7 // cycles + #endif +#elif SELECT_SOFT_SERIAL_SPEED == 3 + // Low speed + #define SERIAL_DELAY 24 // micro sec + #define READ_WRITE_START_ADJUST 30 // cycles + #if __GNUC__ < 6 + #define READ_WRITE_WIDTH_ADJUST 3 // cycles + #else + #define READ_WRITE_WIDTH_ADJUST 7 // cycles + #endif +#elif SELECT_SOFT_SERIAL_SPEED == 4 + // Very Low speed + #define SERIAL_DELAY 36 // micro sec + #define READ_WRITE_START_ADJUST 30 // cycles + #if __GNUC__ < 6 + #define READ_WRITE_WIDTH_ADJUST 3 // cycles + #else + #define READ_WRITE_WIDTH_ADJUST 7 // cycles + #endif +#elif SELECT_SOFT_SERIAL_SPEED == 5 + // Ultra Low speed + #define SERIAL_DELAY 48 // micro sec + #define READ_WRITE_START_ADJUST 30 // cycles + #if __GNUC__ < 6 + #define READ_WRITE_WIDTH_ADJUST 3 // cycles + #else + #define READ_WRITE_WIDTH_ADJUST 7 // cycles + #endif +#else +#error invalid SELECT_SOFT_SERIAL_SPEED value +#endif /* SELECT_SOFT_SERIAL_SPEED */ +#endif /* SERIAL_DELAY */ + +#define SERIAL_DELAY_HALF1 (SERIAL_DELAY/2) +#define SERIAL_DELAY_HALF2 (SERIAL_DELAY - SERIAL_DELAY/2) + +#define SLAVE_INT_WIDTH_US 1 +#ifndef SERIAL_USE_MULTI_TRANSACTION + #define SLAVE_INT_RESPONSE_TIME SERIAL_DELAY +#else + #define SLAVE_INT_ACK_WIDTH_UNIT 2 + #define SLAVE_INT_ACK_WIDTH 4 +#endif + +static SSTD_t *Transaction_table = NULL; +static uint8_t Transaction_table_size = 0; + +inline static void serial_delay(void) ALWAYS_INLINE; +inline static +void serial_delay(void) { + _delay_us(SERIAL_DELAY); +} + +inline static void serial_delay_half1(void) ALWAYS_INLINE; +inline static +void serial_delay_half1(void) { + _delay_us(SERIAL_DELAY_HALF1); +} + +inline static void serial_delay_half2(void) ALWAYS_INLINE; +inline static +void serial_delay_half2(void) { + _delay_us(SERIAL_DELAY_HALF2); +} + +inline static void serial_output(void) ALWAYS_INLINE; +inline static +void serial_output(void) { + SERIAL_PIN_DDR |= SERIAL_PIN_MASK; +} + +// make the serial pin an input with pull-up resistor +inline static void serial_input_with_pullup(void) ALWAYS_INLINE; +inline static +void serial_input_with_pullup(void) { + SERIAL_PIN_DDR &= ~SERIAL_PIN_MASK; + SERIAL_PIN_PORT |= SERIAL_PIN_MASK; +} + +inline static uint8_t serial_read_pin(void) ALWAYS_INLINE; +inline static +uint8_t serial_read_pin(void) { + return !!(SERIAL_PIN_INPUT & SERIAL_PIN_MASK); +} + +inline static void serial_low(void) ALWAYS_INLINE; +inline static +void serial_low(void) { + SERIAL_PIN_PORT &= ~SERIAL_PIN_MASK; +} + +inline static void serial_high(void) ALWAYS_INLINE; +inline static +void serial_high(void) { + SERIAL_PIN_PORT |= SERIAL_PIN_MASK; +} + +void soft_serial_initiator_init(SSTD_t *sstd_table, int sstd_table_size) +{ + Transaction_table = sstd_table; + Transaction_table_size = (uint8_t)sstd_table_size; + serial_output(); + serial_high(); +} + +void soft_serial_target_init(SSTD_t *sstd_table, int sstd_table_size) +{ + Transaction_table = sstd_table; + Transaction_table_size = (uint8_t)sstd_table_size; + serial_input_with_pullup(); + + // Enable INT0-INT3,INT6 + EIMSK |= EIMSK_BIT; +#if SERIAL_PIN_MASK == _BV(PE6) + // Trigger on falling edge of INT6 + EICRB &= EICRx_BIT; +#else + // Trigger on falling edge of INT0-INT3 + EICRA &= EICRx_BIT; +#endif +} + +// Used by the sender to synchronize timing with the reciver. +static void sync_recv(void) NO_INLINE; +static +void sync_recv(void) { + for (uint8_t i = 0; i < SERIAL_DELAY*5 && serial_read_pin(); i++ ) { + } + // This shouldn't hang if the target disconnects because the + // serial line will float to high if the target does disconnect. + while (!serial_read_pin()); +} + +// Used by the reciver to send a synchronization signal to the sender. +static void sync_send(void) NO_INLINE; +static +void sync_send(void) { + serial_low(); + serial_delay(); + serial_high(); +} + +// Reads a byte from the serial line +static uint8_t serial_read_chunk(uint8_t *pterrcount, uint8_t bit) NO_INLINE; +static uint8_t serial_read_chunk(uint8_t *pterrcount, uint8_t bit) { + uint8_t byte, i, p, pb; + + _delay_sub_us(READ_WRITE_START_ADJUST); + for( i = 0, byte = 0, p = PARITY; i < bit; i++ ) { + serial_delay_half1(); // read the middle of pulses + if( serial_read_pin() ) { + byte = (byte << 1) | 1; p ^= 1; + } else { + byte = (byte << 1) | 0; p ^= 0; + } + _delay_sub_us(READ_WRITE_WIDTH_ADJUST); + serial_delay_half2(); + } + /* recive parity bit */ + serial_delay_half1(); // read the middle of pulses + pb = serial_read_pin(); + _delay_sub_us(READ_WRITE_WIDTH_ADJUST); + serial_delay_half2(); + + *pterrcount += (p != pb)? 1 : 0; + + return byte; +} + +// Sends a byte with MSB ordering +void serial_write_chunk(uint8_t data, uint8_t bit) NO_INLINE; +void serial_write_chunk(uint8_t data, uint8_t bit) { + uint8_t b, p; + for( p = PARITY, b = 1<<(bit-1); b ; b >>= 1) { + if(data & b) { + serial_high(); p ^= 1; + } else { + serial_low(); p ^= 0; + } + serial_delay(); + } + /* send parity bit */ + if(p & 1) { serial_high(); } + else { serial_low(); } + serial_delay(); + + serial_low(); // sync_send() / senc_recv() need raise edge +} + +static void serial_send_packet(uint8_t *buffer, uint8_t size) NO_INLINE; +static +void serial_send_packet(uint8_t *buffer, uint8_t size) { + for (uint8_t i = 0; i < size; ++i) { + uint8_t data; + data = buffer[i]; + sync_send(); + serial_write_chunk(data,8); + } +} + +static uint8_t serial_recive_packet(uint8_t *buffer, uint8_t size) NO_INLINE; +static +uint8_t serial_recive_packet(uint8_t *buffer, uint8_t size) { + uint8_t pecount = 0; + for (uint8_t i = 0; i < size; ++i) { + uint8_t data; + sync_recv(); + data = serial_read_chunk(&pecount, 8); + buffer[i] = data; + } + return pecount == 0; +} + +inline static +void change_sender2reciver(void) { + sync_send(); //0 + serial_delay_half1(); //1 + serial_low(); //2 + serial_input_with_pullup(); //2 + serial_delay_half1(); //3 +} + +inline static +void change_reciver2sender(void) { + sync_recv(); //0 + serial_delay(); //1 + serial_low(); //3 + serial_output(); //3 + serial_delay_half1(); //4 +} + +static inline uint8_t nibble_bits_count(uint8_t bits) +{ + bits = (bits & 0x5) + (bits >> 1 & 0x5); + bits = (bits & 0x3) + (bits >> 2 & 0x3); + return bits; +} + +// interrupt handle to be used by the target device +ISR(SERIAL_PIN_INTERRUPT) { + +#ifndef SERIAL_USE_MULTI_TRANSACTION + serial_low(); + serial_output(); + SSTD_t *trans = Transaction_table; +#else + // recive transaction table index + uint8_t tid, bits; + uint8_t pecount = 0; + sync_recv(); + bits = serial_read_chunk(&pecount,7); + tid = bits>>3; + bits = (bits&7) != nibble_bits_count(tid); + if( bits || pecount> 0 || tid > Transaction_table_size ) { + return; + } + serial_delay_half1(); + + serial_high(); // response step1 low->high + serial_output(); + _delay_sub_us(SLAVE_INT_ACK_WIDTH_UNIT*SLAVE_INT_ACK_WIDTH); + SSTD_t *trans = &Transaction_table[tid]; + serial_low(); // response step2 ack high->low +#endif + + // target send phase + if( trans->target2initiator_buffer_size > 0 ) + serial_send_packet((uint8_t *)trans->target2initiator_buffer, + trans->target2initiator_buffer_size); + // target switch to input + change_sender2reciver(); + + // target recive phase + if( trans->initiator2target_buffer_size > 0 ) { + if (serial_recive_packet((uint8_t *)trans->initiator2target_buffer, + trans->initiator2target_buffer_size) ) { + *trans->status = TRANSACTION_ACCEPTED; + } else { + *trans->status = TRANSACTION_DATA_ERROR; + } + } else { + *trans->status = TRANSACTION_ACCEPTED; + } + + sync_recv(); //weit initiator output to high +} + +///////// +// start transaction by initiator +// +// int soft_serial_transaction(int sstd_index) +// +// Returns: +// TRANSACTION_END +// TRANSACTION_NO_RESPONSE +// TRANSACTION_DATA_ERROR +// this code is very time dependent, so we need to disable interrupts +#ifndef SERIAL_USE_MULTI_TRANSACTION +int soft_serial_transaction(void) { + SSTD_t *trans = Transaction_table; +#else +int soft_serial_transaction(int sstd_index) { + if( sstd_index > Transaction_table_size ) + return TRANSACTION_TYPE_ERROR; + SSTD_t *trans = &Transaction_table[sstd_index]; +#endif + cli(); + + // signal to the target that we want to start a transaction + serial_output(); + serial_low(); + _delay_us(SLAVE_INT_WIDTH_US); + +#ifndef SERIAL_USE_MULTI_TRANSACTION + // wait for the target response + serial_input_with_pullup(); + _delay_us(SLAVE_INT_RESPONSE_TIME); + + // check if the target is present + if (serial_read_pin()) { + // target failed to pull the line low, assume not present + serial_output(); + serial_high(); + *trans->status = TRANSACTION_NO_RESPONSE; + sei(); + return TRANSACTION_NO_RESPONSE; + } + +#else + // send transaction table index + int tid = (sstd_index<<3) | (7 & nibble_bits_count(sstd_index)); + sync_send(); + _delay_sub_us(TID_SEND_ADJUST); + serial_write_chunk(tid, 7); + serial_delay_half1(); + + // wait for the target response (step1 low->high) + serial_input_with_pullup(); + while( !serial_read_pin() ) { + _delay_sub_us(2); + } + + // check if the target is present (step2 high->low) + for( int i = 0; serial_read_pin(); i++ ) { + if (i > SLAVE_INT_ACK_WIDTH + 1) { + // slave failed to pull the line low, assume not present + serial_output(); + serial_high(); + *trans->status = TRANSACTION_NO_RESPONSE; + sei(); + return TRANSACTION_NO_RESPONSE; + } + _delay_sub_us(SLAVE_INT_ACK_WIDTH_UNIT); + } +#endif + + // initiator recive phase + // if the target is present syncronize with it + if( trans->target2initiator_buffer_size > 0 ) { + if (!serial_recive_packet((uint8_t *)trans->target2initiator_buffer, + trans->target2initiator_buffer_size) ) { + serial_output(); + serial_high(); + *trans->status = TRANSACTION_DATA_ERROR; + sei(); + return TRANSACTION_DATA_ERROR; + } + } + + // initiator switch to output + change_reciver2sender(); + + // initiator send phase + if( trans->initiator2target_buffer_size > 0 ) { + serial_send_packet((uint8_t *)trans->initiator2target_buffer, + trans->initiator2target_buffer_size); + } + + // always, release the line when not in use + sync_send(); + + *trans->status = TRANSACTION_END; + sei(); + return TRANSACTION_END; +} + +#ifdef SERIAL_USE_MULTI_TRANSACTION +int soft_serial_get_and_clean_status(int sstd_index) { + SSTD_t *trans = &Transaction_table[sstd_index]; + cli(); + int retval = *trans->status; + *trans->status = 0;; + sei(); + return retval; +} +#endif + +#endif + +// Helix serial.c history +// 2018-1-29 fork from let's split and add PD2, modify sync_recv() (#2308, bceffdefc) +// 2018-6-28 bug fix master to slave comm and speed up (#3255, 1038bbef4) +// (adjusted with avr-gcc 4.9.2) +// 2018-7-13 remove USE_SERIAL_PD2 macro (#3374, f30d6dd78) +// (adjusted with avr-gcc 4.9.2) +// 2018-8-11 add support multi-type transaction (#3608, feb5e4aae) +// (adjusted with avr-gcc 4.9.2) +// 2018-10-21 fix serial and RGB animation conflict (#4191, 4665e4fff) +// (adjusted with avr-gcc 7.3.0) +// 2018-10-28 re-adjust compiler depend value of delay (#4269, 8517f8a66) +// (adjusted with avr-gcc 5.4.0, 7.3.0) diff --git a/keyboards/treadstone48/serial.h b/keyboards/treadstone48/serial.h new file mode 100644 index 00000000000..5deaf789e30 --- /dev/null +++ b/keyboards/treadstone48/serial.h @@ -0,0 +1,86 @@ +#pragma once + +#include + +// ///////////////////////////////////////////////////////////////// +// Need Soft Serial defines in config.h +// ///////////////////////////////////////////////////////////////// +// ex. +// #define SOFT_SERIAL_PIN ?? // ?? = D0,D1,D2,D3,E6 +// OPTIONAL: #define SELECT_SOFT_SERIAL_SPEED ? // ? = 1,2,3,4,5 +// // 1: about 137kbps (default) +// // 2: about 75kbps +// // 3: about 39kbps +// // 4: about 26kbps +// // 5: about 20kbps +// +// //// USE OLD API (compatible with let's split serial.c) +// ex. +// #define SERIAL_SLAVE_BUFFER_LENGTH MATRIX_ROWS/2 +// #define SERIAL_MASTER_BUFFER_LENGTH 1 +// +// //// USE NEW API +// //// USE simple API (using signle-type transaction function) +// #define SERIAL_USE_SINGLE_TRANSACTION +// //// USE flexible API (using multi-type transaction function) +// #define SERIAL_USE_MULTI_TRANSACTION +// +// ///////////////////////////////////////////////////////////////// + + +//////////////// for backward compatibility //////////////////////////////// +#if !defined(SERIAL_USE_SINGLE_TRANSACTION) && !defined(SERIAL_USE_MULTI_TRANSACTION) +/* --- USE OLD API (compatible with let's split serial.c) */ + #if SERIAL_SLAVE_BUFFER_LENGTH > 0 + extern volatile uint8_t serial_slave_buffer[SERIAL_SLAVE_BUFFER_LENGTH]; + #endif + #if SERIAL_MASTER_BUFFER_LENGTH > 0 + extern volatile uint8_t serial_master_buffer[SERIAL_MASTER_BUFFER_LENGTH]; + #endif + + void serial_master_init(void); + void serial_slave_init(void); + int serial_update_buffers(void); + +#endif // end of USE OLD API +//////////////////////////////////////////////////////////////////////////// + +// Soft Serial Transaction Descriptor +typedef struct _SSTD_t { + uint8_t *status; + uint8_t initiator2target_buffer_size; + uint8_t *initiator2target_buffer; + uint8_t target2initiator_buffer_size; + uint8_t *target2initiator_buffer; +} SSTD_t; +#define TID_LIMIT( table ) (sizeof(table) / sizeof(SSTD_t)) + +// initiator is transaction start side +void soft_serial_initiator_init(SSTD_t *sstd_table, int sstd_table_size); +// target is interrupt accept side +void soft_serial_target_init(SSTD_t *sstd_table, int sstd_table_size); + +// initiator resullt +#define TRANSACTION_END 0 +#define TRANSACTION_NO_RESPONSE 0x1 +#define TRANSACTION_DATA_ERROR 0x2 +#define TRANSACTION_TYPE_ERROR 0x4 +#ifndef SERIAL_USE_MULTI_TRANSACTION +int soft_serial_transaction(void); +#else +int soft_serial_transaction(int sstd_index); +#endif + +// target status +// *SSTD_t.status has +// initiator: +// TRANSACTION_END +// or TRANSACTION_NO_RESPONSE +// or TRANSACTION_DATA_ERROR +// target: +// TRANSACTION_DATA_ERROR +// or TRANSACTION_ACCEPTED +#define TRANSACTION_ACCEPTED 0x8 +#ifdef SERIAL_USE_MULTI_TRANSACTION +int soft_serial_get_and_clean_status(int sstd_index); +#endif diff --git a/keyboards/treadstone48/ssd1306.c b/keyboards/treadstone48/ssd1306.c new file mode 100644 index 00000000000..dd3290ba0cc --- /dev/null +++ b/keyboards/treadstone48/ssd1306.c @@ -0,0 +1,342 @@ + +#ifdef SSD1306OLED + +#include "ssd1306.h" +#include "i2c.h" +#include +#include "print.h" +#ifndef LOCAL_GLCDFONT +#include "common/glcdfont.c" +#else +#include +#endif +#ifdef ADAFRUIT_BLE_ENABLE +#include "adafruit_ble.h" +#endif +#ifdef PROTOCOL_LUFA +#include "lufa.h" +#endif +#include "sendchar.h" +#include "timer.h" + +// Set this to 1 to help diagnose early startup problems +// when testing power-on with ble. Turn it off otherwise, +// as the latency of printing most of the debug info messes +// with the matrix scan, causing keys to drop. +#define DEBUG_TO_SCREEN 0 + +//static uint16_t last_battery_update; +//static uint32_t vbat; +//#define BatteryUpdateInterval 10000 /* milliseconds */ + +// 'last_flush' is declared as uint16_t, +// so this must be less than 65535 +#define ScreenOffInterval 60000 /* milliseconds */ +#if DEBUG_TO_SCREEN +static uint8_t displaying; +#endif +static uint16_t last_flush; + +static bool force_dirty = true; + +// Write command sequence. +// Returns true on success. +static inline bool _send_cmd1(uint8_t cmd) { + bool res = false; + + if (i2c_start_write(SSD1306_ADDRESS)) { + xprintf("failed to start write to %d\n", SSD1306_ADDRESS); + goto done; + } + + if (i2c_master_write(0x0 /* command byte follows */)) { + print("failed to write control byte\n"); + + goto done; + } + + if (i2c_master_write(cmd)) { + xprintf("failed to write command %d\n", cmd); + goto done; + } + res = true; +done: + i2c_master_stop(); + return res; +} + +// Write 2-byte command sequence. +// Returns true on success +static inline bool _send_cmd2(uint8_t cmd, uint8_t opr) { + if (!_send_cmd1(cmd)) { + return false; + } + return _send_cmd1(opr); +} + +// Write 3-byte command sequence. +// Returns true on success +static inline bool _send_cmd3(uint8_t cmd, uint8_t opr1, uint8_t opr2) { + if (!_send_cmd1(cmd)) { + return false; + } + if (!_send_cmd1(opr1)) { + return false; + } + return _send_cmd1(opr2); +} + +#define send_cmd1(c) if (!_send_cmd1(c)) {goto done;} +#define send_cmd2(c,o) if (!_send_cmd2(c,o)) {goto done;} +#define send_cmd3(c,o1,o2) if (!_send_cmd3(c,o1,o2)) {goto done;} + +static void clear_display(void) { + matrix_clear(&display); + + // Clear all of the display bits (there can be random noise + // in the RAM on startup) + send_cmd3(PageAddr, 0, (DisplayHeight / 8) - 1); + send_cmd3(ColumnAddr, 0, DisplayWidth - 1); + + if (i2c_start_write(SSD1306_ADDRESS)) { + goto done; + } + if (i2c_master_write(0x40)) { + // Data mode + goto done; + } + for (uint8_t row = 0; row < MatrixRows; ++row) { + for (uint8_t col = 0; col < DisplayWidth; ++col) { + i2c_master_write(0); + } + } + + display.dirty = false; + +done: + i2c_master_stop(); +} + +#if DEBUG_TO_SCREEN +#undef sendchar +static int8_t capture_sendchar(uint8_t c) { + sendchar(c); + iota_gfx_write_char(c); + + if (!displaying) { + iota_gfx_flush(); + } + return 0; +} +#endif + +bool iota_gfx_init(bool rotate) { + bool success = false; + + i2c_master_init(); + send_cmd1(DisplayOff); + send_cmd2(SetDisplayClockDiv, 0x80); + send_cmd2(SetMultiPlex, DisplayHeight - 1); + + send_cmd2(SetDisplayOffset, 0); + + + send_cmd1(SetStartLine | 0x0); + send_cmd2(SetChargePump, 0x14 /* Enable */); + send_cmd2(SetMemoryMode, 0 /* horizontal addressing */); + + if(rotate){ + // the following Flip the display orientation 180 degrees + send_cmd1(SegRemap); + send_cmd1(ComScanInc); + }else{ + // Flips the display orientation 0 degrees + send_cmd1(SegRemap | 0x1); + send_cmd1(ComScanDec); + } + + send_cmd2(SetComPins, 0x2); + send_cmd2(SetContrast, 0x8f); + send_cmd2(SetPreCharge, 0xf1); + send_cmd2(SetVComDetect, 0x40); + send_cmd1(DisplayAllOnResume); + send_cmd1(NormalDisplay); + send_cmd1(DeActivateScroll); + send_cmd1(DisplayOn); + + send_cmd2(SetContrast, 0); // Dim + + clear_display(); + + success = true; + + iota_gfx_flush(); + +#if DEBUG_TO_SCREEN + print_set_sendchar(capture_sendchar); +#endif + +done: + return success; +} + +bool iota_gfx_off(void) { + bool success = false; + + send_cmd1(DisplayOff); + success = true; + +done: + return success; +} + +bool iota_gfx_on(void) { + bool success = false; + + send_cmd1(DisplayOn); + success = true; + +done: + return success; +} + +void matrix_write_char_inner(struct CharacterMatrix *matrix, uint8_t c) { + *matrix->cursor = c; + ++matrix->cursor; + + if (matrix->cursor - &matrix->display[0][0] == sizeof(matrix->display)) { + // We went off the end; scroll the display upwards by one line + memmove(&matrix->display[0], &matrix->display[1], + MatrixCols * (MatrixRows - 1)); + matrix->cursor = &matrix->display[MatrixRows - 1][0]; + memset(matrix->cursor, ' ', MatrixCols); + } +} + +void matrix_write_char(struct CharacterMatrix *matrix, uint8_t c) { + matrix->dirty = true; + + if (c == '\n') { + // Clear to end of line from the cursor and then move to the + // start of the next line + uint8_t cursor_col = (matrix->cursor - &matrix->display[0][0]) % MatrixCols; + + while (cursor_col++ < MatrixCols) { + matrix_write_char_inner(matrix, ' '); + } + return; + } + + matrix_write_char_inner(matrix, c); +} + +void iota_gfx_write_char(uint8_t c) { + matrix_write_char(&display, c); +} + +void matrix_write(struct CharacterMatrix *matrix, const char *data) { + const char *end = data + strlen(data); + while (data < end) { + matrix_write_char(matrix, *data); + ++data; + } +} + +void iota_gfx_write(const char *data) { + matrix_write(&display, data); +} + +void matrix_write_P(struct CharacterMatrix *matrix, const char *data) { + while (true) { + uint8_t c = pgm_read_byte(data); + if (c == 0) { + return; + } + matrix_write_char(matrix, c); + ++data; + } +} + +void iota_gfx_write_P(const char *data) { + matrix_write_P(&display, data); +} + +void matrix_clear(struct CharacterMatrix *matrix) { + memset(matrix->display, ' ', sizeof(matrix->display)); + matrix->cursor = &matrix->display[0][0]; + matrix->dirty = true; +} + +void iota_gfx_clear_screen(void) { + matrix_clear(&display); +} + +void matrix_render(struct CharacterMatrix *matrix) { + last_flush = timer_read(); + iota_gfx_on(); +#if DEBUG_TO_SCREEN + ++displaying; +#endif + + // Move to the home position + send_cmd3(PageAddr, 0, MatrixRows - 1); + send_cmd3(ColumnAddr, 0, (MatrixCols * FontWidth) - 1); + + if (i2c_start_write(SSD1306_ADDRESS)) { + goto done; + } + if (i2c_master_write(0x40)) { + // Data mode + goto done; + } + + for (uint8_t row = 0; row < MatrixRows; ++row) { + for (uint8_t col = 0; col < MatrixCols; ++col) { + const uint8_t *glyph = font + (matrix->display[row][col] * FontWidth); + + for (uint8_t glyphCol = 0; glyphCol < FontWidth; ++glyphCol) { + uint8_t colBits = pgm_read_byte(glyph + glyphCol); + i2c_master_write(colBits); + } + + // 1 column of space between chars (it's not included in the glyph) + //i2c_master_write(0); + } + } + + matrix->dirty = false; + +done: + i2c_master_stop(); +#if DEBUG_TO_SCREEN + --displaying; +#endif +} + +void iota_gfx_flush(void) { + matrix_render(&display); +} + +__attribute__ ((weak)) +void iota_gfx_task_user(void) { +} + +void iota_gfx_task(void) { + iota_gfx_task_user(); + + if (display.dirty|| force_dirty) { + iota_gfx_flush(); + force_dirty = false; + } + + if (timer_elapsed(last_flush) > ScreenOffInterval) { + iota_gfx_off(); + } +} + +bool process_record_gfx(uint16_t keycode, keyrecord_t *record) { + force_dirty = true; + return true; +} + +#endif diff --git a/keyboards/treadstone48/ssd1306.h b/keyboards/treadstone48/ssd1306.h new file mode 100644 index 00000000000..49f258efa92 --- /dev/null +++ b/keyboards/treadstone48/ssd1306.h @@ -0,0 +1,90 @@ +#pragma once + +#include +#include +#include "pincontrol.h" +#include "action.h" + +enum ssd1306_cmds { + DisplayOff = 0xAE, + DisplayOn = 0xAF, + + SetContrast = 0x81, + DisplayAllOnResume = 0xA4, + + DisplayAllOn = 0xA5, + NormalDisplay = 0xA6, + InvertDisplay = 0xA7, + SetDisplayOffset = 0xD3, + SetComPins = 0xda, + SetVComDetect = 0xdb, + SetDisplayClockDiv = 0xD5, + SetPreCharge = 0xd9, + SetMultiPlex = 0xa8, + SetLowColumn = 0x00, + SetHighColumn = 0x10, + SetStartLine = 0x40, + + SetMemoryMode = 0x20, + ColumnAddr = 0x21, + PageAddr = 0x22, + + ComScanInc = 0xc0, + ComScanDec = 0xc8, + SegRemap = 0xa0, + SetChargePump = 0x8d, + ExternalVcc = 0x01, + SwitchCapVcc = 0x02, + + ActivateScroll = 0x2f, + DeActivateScroll = 0x2e, + SetVerticalScrollArea = 0xa3, + RightHorizontalScroll = 0x26, + LeftHorizontalScroll = 0x27, + VerticalAndRightHorizontalScroll = 0x29, + VerticalAndLeftHorizontalScroll = 0x2a, +}; + +// Controls the SSD1306 128x32 OLED display via i2c + +#ifndef SSD1306_ADDRESS +#define SSD1306_ADDRESS 0x3C +#endif + +#define DisplayHeight 32 +#define DisplayWidth 128 + +#define FontHeight 8 +#define FontWidth 6 + +#define MatrixRows (DisplayHeight / FontHeight) +#define MatrixCols (DisplayWidth / FontWidth) + +struct CharacterMatrix { + uint8_t display[MatrixRows][MatrixCols]; + uint8_t *cursor; + bool dirty; +}; + +struct CharacterMatrix display; + +bool iota_gfx_init(bool rotate); +void iota_gfx_task(void); +bool iota_gfx_off(void); +bool iota_gfx_on(void); +void iota_gfx_flush(void); +void iota_gfx_write_char(uint8_t c); +void iota_gfx_write(const char *data); +void iota_gfx_write_P(const char *data); +void iota_gfx_clear_screen(void); + +void iota_gfx_task_user(void); + +void matrix_clear(struct CharacterMatrix *matrix); +void matrix_write_char_inner(struct CharacterMatrix *matrix, uint8_t c); +void matrix_write_char(struct CharacterMatrix *matrix, uint8_t c); +void matrix_write(struct CharacterMatrix *matrix, const char *data); +void matrix_write_P(struct CharacterMatrix *matrix, const char *data); +void matrix_render(struct CharacterMatrix *matrix); + +bool process_record_gfx(uint16_t keycode, keyrecord_t *record); diff --git a/keyboards/treadstone48/treadstone48.c b/keyboards/treadstone48/treadstone48.c new file mode 100644 index 00000000000..faadb269065 --- /dev/null +++ b/keyboards/treadstone48/treadstone48.c @@ -0,0 +1 @@ +#include "treadstone48.h" diff --git a/keyboards/treadstone48/treadstone48.h b/keyboards/treadstone48/treadstone48.h new file mode 100644 index 00000000000..3123d1de531 --- /dev/null +++ b/keyboards/treadstone48/treadstone48.h @@ -0,0 +1,15 @@ +#pragma once + +#ifdef KEYBOARD_treadstone48_rev1 + #include "rev1.h" +#endif + +#include "quantum.h" + +#ifdef PROTOCOL_LUFA +#include "lufa.h" +#include "split_util.h" +#endif +#ifdef SSD1306OLED + #include "ssd1306.h" +#endif From 76d982febaf5f154e633d45a9e53cbc21f3853ae Mon Sep 17 00:00:00 2001 From: stanrc85 <47038504+stanrc85@users.noreply.github.com> Date: Thu, 4 Apr 2019 01:57:41 -0400 Subject: [PATCH 025/171] [Keymap] New HS60/v2 HHKB keymap for goatmaster (#5545) * Adding new keymap folder for goadmaster * add switch break * zeal60 rgb backlight files * modified for red caps lock key * Remove return statement * Files removed * Add new RGB options * Back to original file --- keyboards/hs60/v2/keymaps/goatmaster/config.h | 37 ++++++++++ keyboards/hs60/v2/keymaps/goatmaster/keymap.c | 71 +++++++++++++++++++ .../hs60/v2/keymaps/goatmaster/readme.md | 6 ++ keyboards/hs60/v2/keymaps/goatmaster/rules.mk | 66 +++++++++++++++++ 4 files changed, 180 insertions(+) create mode 100644 keyboards/hs60/v2/keymaps/goatmaster/config.h create mode 100644 keyboards/hs60/v2/keymaps/goatmaster/keymap.c create mode 100644 keyboards/hs60/v2/keymaps/goatmaster/readme.md create mode 100644 keyboards/hs60/v2/keymaps/goatmaster/rules.mk diff --git a/keyboards/hs60/v2/keymaps/goatmaster/config.h b/keyboards/hs60/v2/keymaps/goatmaster/config.h new file mode 100644 index 00000000000..f63c9035567 --- /dev/null +++ b/keyboards/hs60/v2/keymaps/goatmaster/config.h @@ -0,0 +1,37 @@ +/* +Copyright 2018 Yiancar + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ +#pragma once + +/* Include overwrites for specific keymap */ + +#define HS60_HHKB +#undef PRODUCT_ID +#define PRODUCT_ID 0x4855 + +#undef RGB_BACKLIGHT_ALPHAS_MODS_ROW_0 +#undef RGB_BACKLIGHT_ALPHAS_MODS_ROW_1 +#undef RGB_BACKLIGHT_ALPHAS_MODS_ROW_2 +#undef RGB_BACKLIGHT_ALPHAS_MODS_ROW_3 +#undef RGB_BACKLIGHT_ALPHAS_MODS_ROW_4 +#define RGB_BACKLIGHT_ALPHAS_MODS_ROW_0 0b0000000000000001 +#define RGB_BACKLIGHT_ALPHAS_MODS_ROW_1 0b0000000000000001 +#define RGB_BACKLIGHT_ALPHAS_MODS_ROW_2 0b0011000000000001 +#define RGB_BACKLIGHT_ALPHAS_MODS_ROW_3 0b0011000000000001 +#define RGB_BACKLIGHT_ALPHAS_MODS_ROW_4 0b0011100000000111 + +#undef RGB_BACKLIGHT_CAPS_LOCK_INDICATOR +#define RGB_BACKLIGHT_CAPS_LOCK_INDICATOR { .color = { .h = 0, .s = 255 }, .index = 3-1 } //red diff --git a/keyboards/hs60/v2/keymaps/goatmaster/keymap.c b/keyboards/hs60/v2/keymaps/goatmaster/keymap.c new file mode 100644 index 00000000000..6273dbc646e --- /dev/null +++ b/keyboards/hs60/v2/keymaps/goatmaster/keymap.c @@ -0,0 +1,71 @@ +/* Copyright 2018 Yiancar + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ +#include QMK_KEYBOARD_H + +//This is the HHKB version of the PCB + +enum macro_keys { + KC_EML = SAFE_RANGE +}; + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { +[0] = LAYOUT_60_hhkb( /* Base */ + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_GRV, KC_BSLS,\ + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSPC,\ + KC_LCTL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, \ + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, MO(1),\ + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RGUI, KC_RCTL ), + +[1] = LAYOUT_60_hhkb( /* FN */ + RESET, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_TRNS, KC_TRNS,\ + KC_TRNS, EF_DEC, EF_INC, H1_DEC, H1_INC, H2_DEC, H2_INC, BR_DEC, BR_INC, ES_DEC, ES_INC, KC_UP, KC_TRNS, KC_DEL, \ + KC_TRNS, KC_VOLD, KC_VOLU, KC_MUTE, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_HOME, KC_PGUP, KC_LEFT, KC_RGHT, KC_TRNS, \ + KC_TRNS, KC_TRNS, S1_DEC, S1_INC, S2_DEC, S2_INC, KC_TRNS, KC_TRNS, KC_END, KC_PGDN, KC_DOWN, KC_TRNS, KC_TRNS,\ + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS ), + +[2] = LAYOUT_60_hhkb( /* Empty for dynamic keymaps */ + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,\ + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,\ + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \ + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,\ + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS ), + +[3] = LAYOUT_60_hhkb( /* Empty for dynamic keymaps */ + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,\ + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,\ + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \ + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,\ + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS ), +}; + +void matrix_init_user(void) { + //user initialization +} + +void matrix_scan_user(void) { + //user matrix +} + +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + switch (keycode) { + case KC_EML: //use "KC_EML" as keycode in layers above to call macro + if (!record->event.pressed) { + send_string_with_delay_P(PSTR("example@email.com"), 10); //change email value here + } + break; + } + return true; +} diff --git a/keyboards/hs60/v2/keymaps/goatmaster/readme.md b/keyboards/hs60/v2/keymaps/goatmaster/readme.md new file mode 100644 index 00000000000..ea9803cc0bb --- /dev/null +++ b/keyboards/hs60/v2/keymaps/goatmaster/readme.md @@ -0,0 +1,6 @@ +The default keymap for HHKB HS60 V2. VIA support enabled. +========================================================= + +![Layout image](https://imgur.com/usbrQWL.png) + +Default layer is normal HHKB with 7U space. Fn layer is used for RGB functions, Volume control and arrow cluster \ No newline at end of file diff --git a/keyboards/hs60/v2/keymaps/goatmaster/rules.mk b/keyboards/hs60/v2/keymaps/goatmaster/rules.mk new file mode 100644 index 00000000000..a2850a83057 --- /dev/null +++ b/keyboards/hs60/v2/keymaps/goatmaster/rules.mk @@ -0,0 +1,66 @@ +# project specific files +SRC = keyboards/zeal60/zeal60.c \ + keyboards/zeal60/rgb_backlight.c \ + drivers/issi/is31fl3733.c \ + quantum/color.c \ + drivers/arm/i2c_master.c + +## chip/board settings +# the next two should match the directories in +# /os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES) +MCU_FAMILY = STM32 +MCU_SERIES = STM32F3xx + +# Linker script to use +# it should exist either in /os/common/ports/ARMCMx/compilers/GCC/ld/ +# or /ld/ +MCU_LDSCRIPT = STM32F303xC + +# Startup code to use +# - it should exist in /os/common/startup/ARMCMx/compilers/GCC/mk/ +MCU_STARTUP = stm32f3xx + +# Board: it should exist either in /os/hal/boards/ +# or /boards +BOARD = GENERIC_STM32_F303XC + +# Cortex version +MCU = cortex-m4 + +# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7 +ARMV = 7 + +USE_FPU = yes + +# Vector table for application +# 0x00000000-0x00001000 area is occupied by bootlaoder.*/ +# The CORTEX_VTOR... is needed only for MCHCK/Infinity KB +# OPT_DEFS = -DCORTEX_VTOR_INIT=0x08005000 +OPT_DEFS = + +# Do not put the microcontroller into power saving mode +# when we get USB suspend event. We want it to keep updating +# backlight effects. +OPT_DEFS += -DNO_SUSPEND_POWER_DOWN + +# Options to pass to dfu-util when flashing +DFU_ARGS = -d 0483:df11 -a 0 -s 0x08000000:leave + +# Build Options +# comment out to disable the options. +# +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration +MOUSEKEY_ENABLE = yes # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control +CONSOLE_ENABLE = no # Console for debug +COMMAND_ENABLE = no # Commands for debug and configuration +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend +NKRO_ENABLE = yes # USB Nkey Rollover +AUDIO_ENABLE = no # Audio output on port C6 +NO_USB_STARTUP_CHECK = no # Disable initialization only when usb is plugged in +#SERIAL_LINK_ENABLE = yes + +RAW_ENABLE = yes +DYNAMIC_KEYMAP_ENABLE = yes +CIE1931_CURVE = yes From 3c7cb5cf5dbf9e97db9b98e32beca9ee58a1c246 Mon Sep 17 00:00:00 2001 From: Deckweiss Date: Thu, 4 Apr 2019 15:05:06 +0200 Subject: [PATCH 026/171] Added Hacked Motospeed keyboard (#5534) * Added first configuration for handwired hacked motosped keyboard * Added first keymap * Fixed h file key layout * Swapped Y and Z in default keymap * Added name, email and description * Moved hacked motospeed keyboard to handwired * Changed make command in readme * Formatted readme to be displayed properly with markdown * Formatted keymap and layout to better reflect the physical keyboard * Fixed info.json * Update keyboards/handwired/hacked_motospeed/info.json Co-Authored-By: Deckweiss * Removed .directory from .gitignore Co-Authored-By: Deckweiss * Minor changes and cleanup * Update keyboards/handwired/hacked_motospeed/hacked_motospeed.h Added back newline needed for properly parsing Co-Authored-By: Deckweiss --- keyboards/handwired/hacked_motospeed/config.h | 249 ++++++++++++++++++ .../hacked_motospeed/hacked_motospeed.c | 43 +++ .../hacked_motospeed/hacked_motospeed.h | 46 ++++ .../handwired/hacked_motospeed/info.json | 12 + .../hacked_motospeed/keymaps/default/config.h | 19 ++ .../hacked_motospeed/keymaps/default/keymap.c | 65 +++++ .../keymaps/default/readme.md | 1 + .../handwired/hacked_motospeed/readme.md | 23 ++ keyboards/handwired/hacked_motospeed/rules.mk | 81 ++++++ 9 files changed, 539 insertions(+) create mode 100644 keyboards/handwired/hacked_motospeed/config.h create mode 100644 keyboards/handwired/hacked_motospeed/hacked_motospeed.c create mode 100644 keyboards/handwired/hacked_motospeed/hacked_motospeed.h create mode 100644 keyboards/handwired/hacked_motospeed/info.json create mode 100644 keyboards/handwired/hacked_motospeed/keymaps/default/config.h create mode 100644 keyboards/handwired/hacked_motospeed/keymaps/default/keymap.c create mode 100644 keyboards/handwired/hacked_motospeed/keymaps/default/readme.md create mode 100644 keyboards/handwired/hacked_motospeed/readme.md create mode 100644 keyboards/handwired/hacked_motospeed/rules.mk diff --git a/keyboards/handwired/hacked_motospeed/config.h b/keyboards/handwired/hacked_motospeed/config.h new file mode 100644 index 00000000000..59300e0d27e --- /dev/null +++ b/keyboards/handwired/hacked_motospeed/config.h @@ -0,0 +1,249 @@ +/* +Copyright 2019 Vladislav Opara + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#pragma once + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0xFEED +#define PRODUCT_ID 0x0690 +#define DEVICE_VER 0x0001 +#define MANUFACTURER MMO_Corp +#define PRODUCT hacked_motospeed +#define DESCRIPTION Motospeed Numpads wired to Teensy++2.0 + +/* key matrix size */ +#define MATRIX_ROWS 10 +#define MATRIX_COLS 12 + +/* + * Keyboard Matrix Assignments + * + * Change this to how you wired your keyboard + * COLS: AVR pins used for columns, left to right + * ROWS: AVR pins used for rows, top to bottom + * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) + * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) + * +*/ + +// WR XR YR ZR VR ZL YL XL WL VL +#define MATRIX_ROW_PINS { B3, B5, F1, B4, B6, D5, D4, D6, D7, C4} + +// ER DR CR BR AR FR FL AL BL CL DL EL +#define MATRIX_COL_PINS { F7, F6, F5, F4, F3, F2, E0, E1, C0, C1, C2, C3 } +#define UNUSED_PINS + +/* COL2ROW, ROW2COL*/ +//#define DIODE_DIRECTION COL2ROW + +/* + * Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN. + */ +//#define SOFT_SERIAL_PIN D0 // or D1, D2, D3, E6 + +#define BACKLIGHT_PIN B7 +// #define BACKLIGHT_BREATHING +#define BACKLIGHT_LEVELS 3 + +// #define RGB_DI_PIN E2 +// #ifdef RGB_DI_PIN +// #define RGBLED_NUM 16 +// #define RGBLIGHT_HUE_STEP 8 +// #define RGBLIGHT_SAT_STEP 8 +// #define RGBLIGHT_VAL_STEP 8 +// #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */ +// #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ +// /*== all animations enable ==*/ +// #define RGBLIGHT_ANIMATIONS +// /*== or choose animations ==*/ +// #define RGBLIGHT_EFFECT_BREATHING +// #define RGBLIGHT_EFFECT_RAINBOW_MOOD +// #define RGBLIGHT_EFFECT_RAINBOW_SWIRL +// #define RGBLIGHT_EFFECT_SNAKE +// #define RGBLIGHT_EFFECT_KNIGHT +// #define RGBLIGHT_EFFECT_CHRISTMAS +// #define RGBLIGHT_EFFECT_STATIC_GRADIENT +// #define RGBLIGHT_EFFECT_RGB_TEST +// #define RGBLIGHT_EFFECT_ALTERNATING +// #endif + +/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ +#define DEBOUNCING_DELAY 5 + +/* define if matrix has ghost (lacks anti-ghosting diodes) */ +#define MATRIX_HAS_GHOST + +/* number of backlight levels */ + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +#define LOCKING_SUPPORT_ENABLE +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE + +/* If defined, GRAVE_ESC will always act as ESC when CTRL is held. + * This is userful for the Windows task manager shortcut (ctrl+shift+esc). + */ +// #define GRAVE_ESC_CTRL_OVERRIDE + +/* + * Force NKRO + * + * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved + * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the + * makefile for this to work.) + * + * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) + * until the next keyboard reset. + * + * NKRO may prevent your keystrokes from being detected in the BIOS, but it is + * fully operational during normal computer usage. + * + * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) + * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by + * bootmagic, NKRO mode will always be enabled until it is toggled again during a + * power-up. + * + */ +#define FORCE_NKRO + +/* + * Magic Key Options + * + * Magic keys are hotkey commands that allow control over firmware functions of + * the keyboard. They are best used in combination with the HID Listen program, + * found here: https://www.pjrc.com/teensy/hid_listen.html + * + * The options below allow the magic key functionality to be changed. This is + * useful if your keyboard/keypad is missing keys and you want magic key support. + * + */ + +/* key combination for magic key command */ +/* defined by default; to change, uncomment and set to the combination you want */ +// #define IS_COMMAND() (get_mods() == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT))) + +/* control how magic key switches layers */ +//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true +//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true +//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false + +/* override magic key keymap */ +//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS +//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS +//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM +//#define MAGIC_KEY_HELP H +//#define MAGIC_KEY_HELP_ALT SLASH +//#define MAGIC_KEY_DEBUG D +//#define MAGIC_KEY_DEBUG_MATRIX X +//#define MAGIC_KEY_DEBUG_KBD K +//#define MAGIC_KEY_DEBUG_MOUSE M +//#define MAGIC_KEY_VERSION V +//#define MAGIC_KEY_STATUS S +//#define MAGIC_KEY_CONSOLE C +//#define MAGIC_KEY_LAYER0 0 +//#define MAGIC_KEY_LAYER0_ALT GRAVE +//#define MAGIC_KEY_LAYER1 1 +//#define MAGIC_KEY_LAYER2 2 +//#define MAGIC_KEY_LAYER3 3 +//#define MAGIC_KEY_LAYER4 4 +//#define MAGIC_KEY_LAYER5 5 +//#define MAGIC_KEY_LAYER6 6 +//#define MAGIC_KEY_LAYER7 7 +//#define MAGIC_KEY_LAYER8 8 +//#define MAGIC_KEY_LAYER9 9 +//#define MAGIC_KEY_BOOTLOADER B +//#define MAGIC_KEY_BOOTLOADER_ALT ESC +//#define MAGIC_KEY_LOCK CAPS +//#define MAGIC_KEY_EEPROM E +//#define MAGIC_KEY_EEPROM_CLEAR BSPACE +//#define MAGIC_KEY_NKRO N +//#define MAGIC_KEY_SLEEP_LED Z + +/* + * Feature disable options + * These options are also useful to firmware size reduction. + */ + +/* disable debug print */ +//#define NO_DEBUG + +/* disable print */ +//#define NO_PRINT + +/* disable action features */ +//#define NO_ACTION_LAYER +//#define NO_ACTION_TAPPING +//#define NO_ACTION_ONESHOT +//#define NO_ACTION_MACRO +//#define NO_ACTION_FUNCTION + +/* + * MIDI options + */ + +/* Prevent use of disabled MIDI features in the keymap */ +//#define MIDI_ENABLE_STRICT 1 + +/* enable basic MIDI features: + - MIDI notes can be sent when in Music mode is on +*/ +//#define MIDI_BASIC + +/* enable advanced MIDI features: + - MIDI notes can be added to the keymap + - Octave shift and transpose + - Virtual sustain, portamento, and modulation wheel + - etc. +*/ +//#define MIDI_ADVANCED + +/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */ +//#define MIDI_TONE_KEYCODE_OCTAVES 1 + +/* + * HD44780 LCD Display Configuration + */ +/* +#define LCD_LINES 2 //< number of visible lines of the display +#define LCD_DISP_LENGTH 16 //< visibles characters per line of the display + +#define LCD_IO_MODE 1 //< 0: memory mapped mode, 1: IO port mode + +#if LCD_IO_MODE +#define LCD_PORT PORTB //< port for the LCD lines +#define LCD_DATA0_PORT LCD_PORT //< port for 4bit data bit 0 +#define LCD_DATA1_PORT LCD_PORT //< port for 4bit data bit 1 +#define LCD_DATA2_PORT LCD_PORT //< port for 4bit data bit 2 +#define LCD_DATA3_PORT LCD_PORT //< port for 4bit data bit 3 +#define LCD_DATA0_PIN 4 //< pin for 4bit data bit 0 +#define LCD_DATA1_PIN 5 //< pin for 4bit data bit 1 +#define LCD_DATA2_PIN 6 //< pin for 4bit data bit 2 +#define LCD_DATA3_PIN 7 //< pin for 4bit data bit 3 +#define LCD_RS_PORT LCD_PORT //< port for RS line +#define LCD_RS_PIN 3 //< pin for RS line +#define LCD_RW_PORT LCD_PORT //< port for RW line +#define LCD_RW_PIN 2 //< pin for RW line +#define LCD_E_PORT LCD_PORT //< port for Enable line +#define LCD_E_PIN 1 //< pin for Enable line +#endif +*/ + +/* Bootmagic Lite key configuration */ +// #define BOOTMAGIC_LITE_ROW 0 +// #define BOOTMAGIC_LITE_COLUMN 0 \ No newline at end of file diff --git a/keyboards/handwired/hacked_motospeed/hacked_motospeed.c b/keyboards/handwired/hacked_motospeed/hacked_motospeed.c new file mode 100644 index 00000000000..21643895d75 --- /dev/null +++ b/keyboards/handwired/hacked_motospeed/hacked_motospeed.c @@ -0,0 +1,43 @@ +/* Copyright 2019 Vladislav Opara + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ +#include "hacked_motospeed.h" + +void matrix_init_kb(void) { + // put your keyboard start-up code here + // runs once when the firmware starts up + + matrix_init_user(); +} + +void matrix_scan_kb(void) { + // put your looping keyboard code here + // runs every cycle (a lot) + + matrix_scan_user(); +} + +bool process_record_kb(uint16_t keycode, keyrecord_t *record) { + // put your per-action keyboard code here + // runs for every action, just before processing by the firmware + + return process_record_user(keycode, record); +} + +void led_set_kb(uint8_t usb_led) { + // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here + + led_set_user(usb_led); +} \ No newline at end of file diff --git a/keyboards/handwired/hacked_motospeed/hacked_motospeed.h b/keyboards/handwired/hacked_motospeed/hacked_motospeed.h new file mode 100644 index 00000000000..1063fd2e623 --- /dev/null +++ b/keyboards/handwired/hacked_motospeed/hacked_motospeed.h @@ -0,0 +1,46 @@ +/* Copyright 2019 Vladislav Opara + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ +#pragma once + +#include "quantum.h" + +/* This a shortcut to help you visually see your layout. + * + * The first section contains all of the arguments representing the physical + * layout of the board and position of the keys. + * + * The second converts the arguments into a two-dimensional array which + * represents the switch matrix. + */ +#define LAYOUT( \ + EWR, DWR, CWR, BWR, AWR, FXR, FYL, AZL, BZL, CZL, DZL, \ + DXR, CXR, BXR, AXR, FZR, DVL, AYL, BYL, CYL, DYL, EZL, \ + EZR, DYR, CYR, BYR, AYR, DVR, FZL, AXL, BXL, CXL, DXL, \ + DZR, CZR, BZR, AZR, FYR, FXL, AWL, BWL, CWL, DWL, EWL \ +) \ +{ \ + { EWR, DWR, CWR, BWR, AWR, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO }, \ + { KC_NO, DXR, CXR, BXR, AXR, FXR, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO }, \ + { KC_NO, DYR, CYR, BYR, AYR, FYR, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO }, \ + { EZR, DZR, CZR, AZR, BZR, FZR, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO }, \ + { KC_NO, DVR, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO }, \ + \ + { KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, FZL, BZL, AZL, CZL, DZL, EZL }, \ + { KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, FYL, AYL, BYL, CYL, DYL, KC_NO }, \ + { KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, FXL, AXL, BXL, CXL, DXL, KC_NO }, \ + { KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, AWL, BWL, CWL, DWL, EWL }, \ + { KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, DVL, KC_NO } \ +} diff --git a/keyboards/handwired/hacked_motospeed/info.json b/keyboards/handwired/hacked_motospeed/info.json new file mode 100644 index 00000000000..7ca92785ebd --- /dev/null +++ b/keyboards/handwired/hacked_motospeed/info.json @@ -0,0 +1,12 @@ +{ + "keyboard_name": "Hacked Motospeed", + "url": "", + "maintainer": "Deckweiss", + "width": 13, + "height": 4, + "layouts": { + "LAYOUT": { + "layout": [{"label":"ESC", "x":0, "y":0, "h":2}, {"label":"Q", "x":1, "y":0}, {"label":"W", "x":2, "y":0}, {"label":"E", "x":3, "y":0}, {"label":"R", "x":4, "y":0}, {"label":"T", "x":5, "y":0}, {"label":"Z", "x":7, "y":0}, {"label":"U", "x":8, "y":0}, {"label":"I", "x":9, "y":0}, {"label":"O", "x":10, "y":0}, {"label":"P", "x":11, "y":0, "w":2}, {"label":"A", "x":1, "y":1}, {"label":"S", "x":2, "y":1}, {"label":"D", "x":3, "y":1}, {"label":"F", "x":4, "y":1}, {"label":"G", "x":5, "y":1}, {"label":"H", "x":7, "y":1}, {"label":"J", "x":8, "y":1}, {"label":"K", "x":9, "y":1}, {"label":"L", "x":10, "y":1}, {"label":"(", "x":11, "y":1}, {"label":")", "x":12, "y":1}, {"label":"=", "x":0, "y":2}, {"label":"Y", "x":1, "y":2}, {"label":"X", "x":2, "y":2}, {"label":"C", "x":3, "y":2}, {"label":"V", "x":4, "y":2}, {"label":"B", "x":5, "y":2}, {"label":"N", "x":7, "y":2}, {"label":"M", "x":8, "y":2}, {"label":",", "x":9, "y":2}, {"label":".", "x":10, "y":2}, {"label":"?", "x":11, "y":2}, {"label":"Fn", "x":0, "y":3, "w":2}, {"label":"Num", "x":2, "y":3}, {"label":"Bksp", "x":3, "y":3}, {"label":"Enter", "x":4, "y":3}, {"label":"Spc", "x":5, "y":3}, {"label":"LShift", "x":7, "y":3}, {"label":"LCtrl", "x":8, "y":3}, {"label":"LAlt", "x":9, "y":3}, {"label":"RAlt", "x":10, "y":3}, {"label":"Meta", "x":11, "y":3}, {"label":"Fn", "x":12, "y":2, "h":2}] + } + } +} \ No newline at end of file diff --git a/keyboards/handwired/hacked_motospeed/keymaps/default/config.h b/keyboards/handwired/hacked_motospeed/keymaps/default/config.h new file mode 100644 index 00000000000..72de214ba72 --- /dev/null +++ b/keyboards/handwired/hacked_motospeed/keymaps/default/config.h @@ -0,0 +1,19 @@ +/* Copyright 2019 Vladislav Opara + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#pragma once + +// place overrides here \ No newline at end of file diff --git a/keyboards/handwired/hacked_motospeed/keymaps/default/keymap.c b/keyboards/handwired/hacked_motospeed/keymaps/default/keymap.c new file mode 100644 index 00000000000..bdec8f24615 --- /dev/null +++ b/keyboards/handwired/hacked_motospeed/keymaps/default/keymap.c @@ -0,0 +1,65 @@ +/* Copyright 2019 Vladislav Opara + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ +#include QMK_KEYBOARD_H + +// Defines the keycodes used by our macros in process_record_user +enum custom_keycodes { + QMKBEST = SAFE_RANGE, + QMKURL +}; + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [0] = LAYOUT( /* Base */ + KC_ESC, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, \ + KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_LPRN, KC_RPRN, \ + KC_PEQL, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMMA, KC_DOT, KC_QUES, \ + XXXXXXX, XXXXXXX, KC_BSPC, KC_ENT, KC_SPC, KC_LSFT, KC_LCTRL, KC_LALT, KC_ALGR, KC_LWIN, XXXXXXX \ + ), +}; + +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + switch (keycode) { + case QMKBEST: + if (record->event.pressed) { + // when keycode QMKBEST is pressed + SEND_STRING("QMK is the best thing ever!"); + } else { + // when keycode QMKBEST is released + } + break; + case QMKURL: + if (record->event.pressed) { + // when keycode QMKURL is pressed + SEND_STRING("https://qmk.fm/" SS_TAP(X_ENTER)); + } else { + // when keycode QMKURL is released + } + break; + } + return true; +} + +void matrix_init_user(void) { + +} + +void matrix_scan_user(void) { + +} + +void led_set_user(uint8_t usb_led) { + +} \ No newline at end of file diff --git a/keyboards/handwired/hacked_motospeed/keymaps/default/readme.md b/keyboards/handwired/hacked_motospeed/keymaps/default/readme.md new file mode 100644 index 00000000000..4c740bd9a55 --- /dev/null +++ b/keyboards/handwired/hacked_motospeed/keymaps/default/readme.md @@ -0,0 +1 @@ +# The default keymap for hacked_motospeed \ No newline at end of file diff --git a/keyboards/handwired/hacked_motospeed/readme.md b/keyboards/handwired/hacked_motospeed/readme.md new file mode 100644 index 00000000000..ac2d4afc28a --- /dev/null +++ b/keyboards/handwired/hacked_motospeed/readme.md @@ -0,0 +1,23 @@ +# hacked_motospeed + +This is a + - tiny (44key), + - budget (~50€ total expense), + - portable (HID bluetooth & 5aH battery) + - easy to diy (little wiring & soldering needed), + +mechanical keyboard. +It is made by wiring two Motospeed K22 numpads to a Teensy++ 2.0, while reusing as much of the original PCB as possible. +The numpads come with Outemu red linear switches. +(A detailed guide will be posted and linked later) + + +Keyboard Maintainer: [Deckweiss](https://github.com/Deckweiss) +Hardware Supported: Motospeed K22 numpads wired to Teensy++ 2.0 according to my guide (upcoming). +Hardware Availability: Ebay, AliExpress + +Make example for this keyboard (after setting up your build environment): + + make handwired/hacked_motospeed:default + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). \ No newline at end of file diff --git a/keyboards/handwired/hacked_motospeed/rules.mk b/keyboards/handwired/hacked_motospeed/rules.mk new file mode 100644 index 00000000000..1dc955718fb --- /dev/null +++ b/keyboards/handwired/hacked_motospeed/rules.mk @@ -0,0 +1,81 @@ +# MCU name +MCU = at90usb1286 +#MCU = atmega32u4 + +# Processor frequency. +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to +# calculate timings. Do NOT tack on a 'UL' at the end, this will be done +# automatically to create a 32-bit value in your source code. +# +# This will be an integer division of F_USB below, as it is sourced by +# F_USB after it has run through any CPU prescalers. Note that this value +# does not *change* the processor frequency - it should merely be updated to +# reflect the processor speed set externally so that the code can use accurate +# software delays. +F_CPU = 16000000 + + +# +# LUFA specific +# +# Target architecture (see library "Board Types" documentation). +ARCH = AVR8 + +# Input clock frequency. +# This will define a symbol, F_USB, in all source code files equal to the +# input clock frequency (before any prescaling is performed) in Hz. This value may +# differ from F_CPU if prescaling is used on the latter, and is required as the +# raw input clock is fed directly to the PLL sections of the AVR for high speed +# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' +# at the end, this will be done automatically to create a 32-bit value in your +# source code. +# +# If no clock division is performed on the input clock inside the AVR (via the +# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. +F_USB = $(F_CPU) + +# Interrupt driven control endpoint task(+60) +OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT + + +# Bootloader selection +# Teensy halfkay +# Pro Micro caterina +# Atmel DFU atmel-dfu +# LUFA DFU lufa-dfu +# QMK DFU qmk-dfu +# atmega32a bootloadHID +BOOTLOADER = halfkay + + +# If you don't know the bootloader type, then you can specify the +# Boot Section Size in *bytes* by uncommenting out the OPT_DEFS line +# Teensy halfKay 512 +# Teensy++ halfKay 1024 +# Atmel DFU loader 4096 +# LUFA bootloader 4096 +# USBaspLoader 2048 +# OPT_DEFS += -DBOOTLOADER_SIZE=1024 + + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = no # Mouse keys(+4700) +EXTRAKEY_ENABLE = yes # Audio control and System control(+450) +CONSOLE_ENABLE = yes # Console for debug(+400) +COMMAND_ENABLE = yes # Commands for debug and configuration +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend +# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +NKRO_ENABLE = yes # USB Nkey Rollover +BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality on B7 by default +RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow +MIDI_ENABLE = no # MIDI support (+2400 to 4200, depending on config) +UNICODE_ENABLE = no # Unicode +BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID +AUDIO_ENABLE = no # Audio output on port C6 +FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches +HD44780_ENABLE = no # Enable support for HD44780 based LCDs (+400) \ No newline at end of file From 852d125413388aa3e71d2be91f04ddea534f2af3 Mon Sep 17 00:00:00 2001 From: Wilba Date: Fri, 5 Apr 2019 01:10:07 +1100 Subject: [PATCH 027/171] [Keyboard] Added configurable defaults for RGB backlight parameters. (#5549) * Added configurable defaults for RGB backlight indicators. * Added more configurable defaults --- keyboards/hs60/v2/config.h | 10 ++++++++++ keyboards/rama/m60_a/config.h | 15 +++++++++++++++ keyboards/rama/m6_b/config.h | 15 +++++++++++++++ keyboards/zeal60/config.h | 10 ++++++++++ keyboards/zeal60/rgb_backlight.c | 8 ++++---- keyboards/zeal65/config.h | 10 ++++++++++ 6 files changed, 64 insertions(+), 4 deletions(-) diff --git a/keyboards/hs60/v2/config.h b/keyboards/hs60/v2/config.h index bbf17251b4e..05255d13310 100644 --- a/keyboards/hs60/v2/config.h +++ b/keyboards/hs60/v2/config.h @@ -102,9 +102,19 @@ along with this program. If not, see . // disable backlight after timeout in minutes, 0 = no timeout #define RGB_BACKLIGHT_DISABLE_AFTER_TIMEOUT 0 +// the default brightness +#define RGB_BACKLIGHT_BRIGHTNESS 255 + // the default effect (RGB test) #define RGB_BACKLIGHT_EFFECT 255 +// the default effect speed (0-3) +#define RGB_BACKLIGHT_EFFECT_SPEED 0 + +// the default color1 and color2 +#define RGB_BACKLIGHT_COLOR_1 { .h = 0, .s = 255 } +#define RGB_BACKLIGHT_COLOR_2 { .h = 127, .s = 255 } + #define DRIVER_COUNT 2 #define DRIVER_LED_TOTAL 64 diff --git a/keyboards/rama/m60_a/config.h b/keyboards/rama/m60_a/config.h index 2b54cda790d..1cbdee5ae35 100644 --- a/keyboards/rama/m60_a/config.h +++ b/keyboards/rama/m60_a/config.h @@ -87,9 +87,19 @@ // disable backlight after timeout in minutes, 0 = no timeout #define RGB_BACKLIGHT_DISABLE_AFTER_TIMEOUT 0 +// the default brightness +#define RGB_BACKLIGHT_BRIGHTNESS 255 + // the default effect (RGB test) #define RGB_BACKLIGHT_EFFECT 255 +// the default effect speed (0-3) +#define RGB_BACKLIGHT_EFFECT_SPEED 0 + +// the default color1 and color2 +#define RGB_BACKLIGHT_COLOR_1 { .h = 0, .s = 255 } +#define RGB_BACKLIGHT_COLOR_2 { .h = 127, .s = 255 } + // These define which keys in the matrix are alphas/mods // Used for backlight effects so colors are different for // alphas vs. mods @@ -101,6 +111,11 @@ #define RGB_BACKLIGHT_ALPHAS_MODS_ROW_3 0b0011000000000001 #define RGB_BACKLIGHT_ALPHAS_MODS_ROW_4 0b0011100000000111 +#define RGB_BACKLIGHT_CAPS_LOCK_INDICATOR { .color = { .h = 0, .s = 0 }, .index = 255 } +#define RGB_BACKLIGHT_LAYER_1_INDICATOR { .color = { .h = 0, .s = 0 }, .index = 255 } +#define RGB_BACKLIGHT_LAYER_2_INDICATOR { .color = { .h = 0, .s = 0 }, .index = 255 } +#define RGB_BACKLIGHT_LAYER_3_INDICATOR { .color = { .h = 0, .s = 0 }, .index = 255 } + #define DYNAMIC_KEYMAP_LAYER_COUNT 4 // EEPROM usage diff --git a/keyboards/rama/m6_b/config.h b/keyboards/rama/m6_b/config.h index c2a225d53aa..0d690bffafc 100644 --- a/keyboards/rama/m6_b/config.h +++ b/keyboards/rama/m6_b/config.h @@ -120,9 +120,19 @@ // disable backlight after timeout in minutes, 0 = no timeout #define RGB_BACKLIGHT_DISABLE_AFTER_TIMEOUT 0 +// the default brightness +#define RGB_BACKLIGHT_BRIGHTNESS 255 + // the default effect (RGB test) #define RGB_BACKLIGHT_EFFECT 255 +// the default effect speed (0-3) +#define RGB_BACKLIGHT_EFFECT_SPEED 0 + +// the default color1 and color2 +#define RGB_BACKLIGHT_COLOR_1 { .h = 0, .s = 255 } +#define RGB_BACKLIGHT_COLOR_2 { .h = 127, .s = 255 } + // These define which keys in the matrix are alphas/mods // Used for backlight effects so colors are different for // alphas vs. mods @@ -134,6 +144,11 @@ #define RGB_BACKLIGHT_ALPHAS_MODS_ROW_3 0 #define RGB_BACKLIGHT_ALPHAS_MODS_ROW_4 0 +#define RGB_BACKLIGHT_CAPS_LOCK_INDICATOR { .color = { .h = 0, .s = 0 }, .index = 255 } +#define RGB_BACKLIGHT_LAYER_1_INDICATOR { .color = { .h = 0, .s = 0 }, .index = 255 } +#define RGB_BACKLIGHT_LAYER_2_INDICATOR { .color = { .h = 0, .s = 0 }, .index = 255 } +#define RGB_BACKLIGHT_LAYER_3_INDICATOR { .color = { .h = 0, .s = 0 }, .index = 255 } + #define DYNAMIC_KEYMAP_LAYER_COUNT 4 // EEPROM usage diff --git a/keyboards/zeal60/config.h b/keyboards/zeal60/config.h index 94cc9989b74..a5e41116dca 100644 --- a/keyboards/zeal60/config.h +++ b/keyboards/zeal60/config.h @@ -86,9 +86,19 @@ // disable backlight after timeout in minutes, 0 = no timeout #define RGB_BACKLIGHT_DISABLE_AFTER_TIMEOUT 0 +// the default brightness +#define RGB_BACKLIGHT_BRIGHTNESS 255 + // the default effect (RGB test) #define RGB_BACKLIGHT_EFFECT 255 +// the default effect speed (0-3) +#define RGB_BACKLIGHT_EFFECT_SPEED 0 + +// the default color1 and color2 +#define RGB_BACKLIGHT_COLOR_1 { .h = 0, .s = 255 } +#define RGB_BACKLIGHT_COLOR_2 { .h = 127, .s = 255 } + // These define which keys in the matrix are alphas/mods // Used for backlight effects so colors are different for // alphas vs. mods diff --git a/keyboards/zeal60/rgb_backlight.c b/keyboards/zeal60/rgb_backlight.c index 8d7a7fe8d10..d5f206fdcec 100644 --- a/keyboards/zeal60/rgb_backlight.c +++ b/keyboards/zeal60/rgb_backlight.c @@ -69,11 +69,11 @@ backlight_config g_config = { .disable_hhkb_blocker_leds = RGB_BACKLIGHT_DISABLE_HHKB_BLOCKER_LEDS, .disable_when_usb_suspended = RGB_BACKLIGHT_DISABLE_WHEN_USB_SUSPENDED, .disable_after_timeout = RGB_BACKLIGHT_DISABLE_AFTER_TIMEOUT, - .brightness = 255, + .brightness = RGB_BACKLIGHT_BRIGHTNESS, .effect = RGB_BACKLIGHT_EFFECT, - .effect_speed = 0, - .color_1 = { .h = 0, .s = 255 }, - .color_2 = { .h = 127, .s = 255 }, + .effect_speed = RGB_BACKLIGHT_EFFECT_SPEED, + .color_1 = RGB_BACKLIGHT_COLOR_1, + .color_2 = RGB_BACKLIGHT_COLOR_2, .caps_lock_indicator = RGB_BACKLIGHT_CAPS_LOCK_INDICATOR, .layer_1_indicator = RGB_BACKLIGHT_LAYER_1_INDICATOR, .layer_2_indicator = RGB_BACKLIGHT_LAYER_2_INDICATOR, diff --git a/keyboards/zeal65/config.h b/keyboards/zeal65/config.h index 896deac8b8b..224fce1f65b 100644 --- a/keyboards/zeal65/config.h +++ b/keyboards/zeal65/config.h @@ -86,9 +86,19 @@ // disable backlight after timeout in minutes, 0 = no timeout #define RGB_BACKLIGHT_DISABLE_AFTER_TIMEOUT 0 +// the default brightness +#define RGB_BACKLIGHT_BRIGHTNESS 255 + // the default effect (RGB test) #define RGB_BACKLIGHT_EFFECT 255 +// the default effect speed (0-3) +#define RGB_BACKLIGHT_EFFECT_SPEED 0 + +// the default color1 and color2 +#define RGB_BACKLIGHT_COLOR_1 { .h = 0, .s = 255 } +#define RGB_BACKLIGHT_COLOR_2 { .h = 127, .s = 255 } + // These define which keys in the matrix are alphas/mods // Used for backlight effects so colors are different for // alphas vs. mods From f698f1e3f4f51431473d54512fd6c0609b9b72ee Mon Sep 17 00:00:00 2001 From: MechMerlin <30334081+mechmerlin@users.noreply.github.com> Date: Thu, 4 Apr 2019 14:25:35 -0700 Subject: [PATCH 028/171] [Keyboard] Add Budget96 by Donut Cables (#5550) * initial commit of budget96 * non logic changes * add my name to readme * update matrix.c * make the matrix representation of the layout macro * fix up LAYOUT macro * add missing character * initial keymap commit * put KC_NO where they belong * basic keymap * fix matrix row and col definition * The diagram I was sent and the pins used I was sent were in opposite order from each other. This should fix the issues * update the readme * change up manufacturer for budget96 * update copyright date * fix up the switch matrix and provide a keymap * forgot the keymap * other matrix fixes * missing a few keys in the switch matrix * messed up the row tracing * tweak keymap a bit * use a lower case k * fix spacing for markdown rendering * put in the reset key documentation * clean up the file a little * use LAYOUT_96_ansi * add a second layer for lighting controls * add in lighting support * add QMK Configurator support * use pragma once * remove un needed matrix.c * convert to GPIO methods * turn on rgblight_enable and get rid of custom matrix * set bootloadhid_bootloader to 1 * set bootmagic to lite and set it to k50 * add reset information to readme * use i2c_master instead of custom i2c * restore the custom i2c code * introduce reset key and eep_rst in function layer 1 * fix up pip3 install commands * fix up device and manufacturer names * remove un needed comments * add an ALL layout macro along with QMK Configurator support * move budget96 into donutcables directory since he actually has different boards * add a short donut cables blurb taken from his website * update readme for make instructions to point to the new path * Update keyboards/donutcables/budget96/config.h Co-Authored-By: mechmerlin <30334081+mechmerlin@users.noreply.github.com> * Update keyboards/donutcables/budget96/readme.md Co-Authored-By: mechmerlin <30334081+mechmerlin@users.noreply.github.com> * Update keyboards/donutcables/budget96/info.json Co-Authored-By: mechmerlin <30334081+mechmerlin@users.noreply.github.com> * turn on backlight * Update keyboards/donutcables/budget96/readme.md Co-Authored-By: mechmerlin <30334081+mechmerlin@users.noreply.github.com> * remove extra UART and BOOTLOADER settings that are not needed --- keyboards/donutcables/budget96/budget96.c | 80 ++++ keyboards/donutcables/budget96/budget96.h | 56 +++ keyboards/donutcables/budget96/config.h | 47 +++ keyboards/donutcables/budget96/i2c.c | 106 +++++ keyboards/donutcables/budget96/i2c.h | 24 ++ keyboards/donutcables/budget96/info.json | 16 + .../budget96/keymaps/default/config.h | 19 + .../budget96/keymaps/default/keymap.c | 35 ++ .../budget96/keymaps/default/readme.md | 1 + keyboards/donutcables/budget96/readme.md | 44 ++ keyboards/donutcables/budget96/rules.mk | 49 +++ keyboards/donutcables/budget96/usbconfig.h | 394 ++++++++++++++++++ keyboards/donutcables/readme.md | 12 + 13 files changed, 883 insertions(+) create mode 100644 keyboards/donutcables/budget96/budget96.c create mode 100644 keyboards/donutcables/budget96/budget96.h create mode 100644 keyboards/donutcables/budget96/config.h create mode 100644 keyboards/donutcables/budget96/i2c.c create mode 100644 keyboards/donutcables/budget96/i2c.h create mode 100644 keyboards/donutcables/budget96/info.json create mode 100644 keyboards/donutcables/budget96/keymaps/default/config.h create mode 100644 keyboards/donutcables/budget96/keymaps/default/keymap.c create mode 100644 keyboards/donutcables/budget96/keymaps/default/readme.md create mode 100644 keyboards/donutcables/budget96/readme.md create mode 100644 keyboards/donutcables/budget96/rules.mk create mode 100644 keyboards/donutcables/budget96/usbconfig.h create mode 100644 keyboards/donutcables/readme.md diff --git a/keyboards/donutcables/budget96/budget96.c b/keyboards/donutcables/budget96/budget96.c new file mode 100644 index 00000000000..966dd4c1299 --- /dev/null +++ b/keyboards/donutcables/budget96/budget96.c @@ -0,0 +1,80 @@ +/* Copyright 2019 MechMerlin + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ +#include "budget96.h" + +#ifdef BACKLIGHT_ENABLE +#include "backlight.h" +#endif +#ifdef RGBLIGHT_ENABLE +#include "rgblight.h" +#endif + +#include + +#include "action_layer.h" +#include "i2c.h" +#include "quantum.h" + +__attribute__ ((weak)) +void matrix_scan_user(void) { +} + +#ifdef RGBLIGHT_ENABLE +extern rgblight_config_t rgblight_config; + +void rgblight_set(void) { + if (!rgblight_config.enable) { + for (uint8_t i = 0; i < RGBLED_NUM; i++) { + led[i].r = 0; + led[i].g = 0; + led[i].b = 0; + } + } + + i2c_init(); + i2c_send(0xb0, (uint8_t*)led, 3 * RGBLED_NUM); +} +#endif + +void backlight_init_ports(void) { + // initialize pins D0, D1, D4 and D6 as output + setPinOutput(D0); + setPinOutput(D1); + setPinOutput(D4); + setPinOutput(D6); + + // turn RGB LEDs on + writePinHigh(D0); + writePinHigh(D1); + writePinHigh(D4); + writePinHigh(D6); +} + + void backlight_set(uint8_t level) { + if (level == 0) { + // turn RGB LEDs off + writePinLow(D0); + writePinLow(D1); + writePinLow(D4); + writePinLow(D6); + } else { + // turn RGB LEDs on + writePinHigh(D0); + writePinHigh(D1); + writePinHigh(D4); + writePinHigh(D6); + } + } diff --git a/keyboards/donutcables/budget96/budget96.h b/keyboards/donutcables/budget96/budget96.h new file mode 100644 index 00000000000..561d0cbfa22 --- /dev/null +++ b/keyboards/donutcables/budget96/budget96.h @@ -0,0 +1,56 @@ +/* Copyright 2019 MechMerlin + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ +#pragma once + +#include "quantum.h" + +#define LAYOUT_all( \ + k50, k52, k53, k54, k55, k60, k6A, k7A, k70, k5B, k5C, k5D, k5E, k1D, k2E, k0D, k76, k79, k78, \ + k40, k41, k42, k43, k44, k45, k61, k6B, k7B, k71, k4A, k4B, k4C, k4D, k4E, k46, k47, k48, k49, \ + k30, k31, k32, k33, k34, k35, k62, k6C, k7C, k72, k3A, k3B, k3C, k3D, k36, k37, k38, k39, \ + k20, k21, k22, k23, k24, k25, k63, k6D, k7D, k73, k2A, k2B, k2C, k2D, k26, k27, k28, k29, \ + k10, k03, k11, k12, k13, k14, k15, k64, k6E, k7E, k74, k1A, k1B, k68, k16, k17, k18, k19, \ + k00, k01, k02, k65, k75, k0A, k0B, k66, k67, k69, k06, k08, k09 \ +) \ +{ \ + { k00, k01, k02, k03, KC_NO, KC_NO, k06, KC_NO, k08, k09, k0A, k0B, KC_NO, k0D, KC_NO }, \ + { k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1A, k1B, KC_NO, k1D, KC_NO }, \ + { k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2A, k2B, k2C, k2D, k2E }, \ + { k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3A, k3B, k3C, k3D, KC_NO }, \ + { k40, k41, k42, k43, k44, k45, k46, k47, k48, k49, k4A, k4B, k4C, k4D, k4E }, \ + { k50, KC_NO, k52, k53, k54, k55, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, k5B, k5C, k5D, k5E }, \ + { k60, k61, k62, k63, k64, k65, k66, k67, k68, k69, k6A, k6B, k6C, k6D, k6E }, \ + { k70, k71, k72, k73, k74, k75, k76, KC_NO, k78, k79, k7A, k7B, k7C, k7D, k7E }, \ +} + +#define LAYOUT_96_ansi( \ + k50, k52, k53, k54, k55, k60, k6A, k7A, k70, k5B, k5C, k5D, k5E, k1D, k2E, k0D, k76, k79, k78, \ + k40, k41, k42, k43, k44, k45, k61, k6B, k7B, k71, k4A, k4B, k4C, k4E, k46, k47, k48, k49, \ + k30, k31, k32, k33, k34, k35, k62, k6C, k7C, k72, k3A, k3B, k3C, k3D, k36, k37, k38, k39, \ + k20, k21, k22, k23, k24, k25, k63, k6D, k7D, k73, k2A, k2B, k2D, k26, k27, k28, k29, \ + k10, k11, k12, k13, k14, k15, k64, k6E, k7E, k74, k1A, k1B, k68, k16, k17, k18, \ + k00, k01, k02, k65, k75, k0B, k66, k67, k69, k06, k08, k09 \ +) \ +{ \ + { k00, k01, k02, KC_NO, KC_NO, KC_NO, k06, KC_NO, k08, k09, KC_NO, k0B, KC_NO, k0D, KC_NO }, \ + { k10, k11, k12, k13, k14, k15, k16, k17, k18, KC_NO, k1A, k1B, KC_NO, k1D, KC_NO }, \ + { k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2A, k2B, KC_NO, k2D, k2E }, \ + { k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3A, k3B, k3C, k3D, KC_NO }, \ + { k40, k41, k42, k43, k44, k45, k46, k47, k48, k49, k4A, k4B, k4C, KC_NO, k4E }, \ + { k50, KC_NO, k52, k53, k54, k55, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, k5B, k5C, k5D, k5E }, \ + { k60, k61, k62, k63, k64, k65, k66, k67, k68, k69, k6A, k6B, k6C, k6D, k6E }, \ + { k70, k71, k72, k73, k74, k75, k76, KC_NO, k78, k79, k7A, k7B, k7C, k7D, k7E }, \ +} diff --git a/keyboards/donutcables/budget96/config.h b/keyboards/donutcables/budget96/config.h new file mode 100644 index 00000000000..369cbdd07b7 --- /dev/null +++ b/keyboards/donutcables/budget96/config.h @@ -0,0 +1,47 @@ +/* +Copyright 2017 Luiz Ribeiro + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#pragma once + +#include "config_common.h" + +#define VENDOR_ID 0x20A0 +#define PRODUCT_ID 0x422D +#define MANUFACTURER DonutCables +#define PRODUCT budget96 + +#define RGBLED_NUM 16 + +#define MATRIX_ROWS 8 +#define MATRIX_COLS 15 + +#define MATRIX_COL_PINS { A0, A1, A2, A3, A4, A5, A6, A7, C7, C6, C5, C4, C3, C2, D7 } +#define MATRIX_ROW_PINS { B0, B1, B2, B3, B4, B5, B6, B7 } +#define UNUSED_PINS + +#define DIODE_DIRECTION COL2ROW +#define DEBOUNCING_DELAY 5 + +#define NO_BACKLIGHT_CLOCK +#define BACKLIGHT_LEVELS 1 +#define RGBLIGHT_ANIMATIONS + +// Set bootmagic lite key to the key commonly programmed as Esc. +#define BOOTMAGIC_LITE_ROW 5 +#define BOOTMAGIC_LITE_COLUMN 0 + +/* key combination for command */ diff --git a/keyboards/donutcables/budget96/i2c.c b/keyboards/donutcables/budget96/i2c.c new file mode 100644 index 00000000000..e8c4455ad1b --- /dev/null +++ b/keyboards/donutcables/budget96/i2c.c @@ -0,0 +1,106 @@ +/* +Copyright 2016 Luiz Ribeiro + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +// Please do not modify this file + +#include +#include + +#include "i2c.h" + +void i2c_set_bitrate(uint16_t bitrate_khz) { + uint8_t bitrate_div = ((F_CPU / 1000l) / bitrate_khz); + if (bitrate_div >= 16) { + bitrate_div = (bitrate_div - 16) / 2; + } + TWBR = bitrate_div; +} + +void i2c_init(void) { + // set pull-up resistors on I2C bus pins + PORTC |= 0b11; + + i2c_set_bitrate(400); + + // enable TWI (two-wire interface) + TWCR |= (1 << TWEN); + + // enable TWI interrupt and slave address ACK + TWCR |= (1 << TWIE); + TWCR |= (1 << TWEA); +} + +uint8_t i2c_start(uint8_t address) { + // reset TWI control register + TWCR = 0; + + // begin transmission and wait for it to end + TWCR = (1< + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +// Please do not modify this file + +#pragma once + +void i2c_init(void); +void i2c_set_bitrate(uint16_t bitrate_khz); +uint8_t i2c_send(uint8_t address, uint8_t *data, uint16_t length); diff --git a/keyboards/donutcables/budget96/info.json b/keyboards/donutcables/budget96/info.json new file mode 100644 index 00000000000..40a942127f4 --- /dev/null +++ b/keyboards/donutcables/budget96/info.json @@ -0,0 +1,16 @@ +{ + "keyboard_name": "budget96", + "url": "", + "maintainer": "qmk", + "width": 19, + "height": 6, + "layouts": { + "LAYOUT_all": { + "layout": [{"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":4, "y":0}, {"x":5, "y":0}, {"x":6, "y":0}, {"x":7, "y":0}, {"x":8, "y":0}, {"x":9, "y":0}, {"x":10, "y":0}, {"x":11, "y":0}, {"x":12, "y":0}, {"x":13, "y":0}, {"x":14, "y":0}, {"x":15, "y":0}, {"x":16, "y":0}, {"x":17, "y":0}, {"x":18, "y":0}, {"x":0, "y":1}, {"x":1, "y":1}, {"x":2, "y":1}, {"x":3, "y":1}, {"x":4, "y":1}, {"x":5, "y":1}, {"x":6, "y":1}, {"x":7, "y":1}, {"x":8, "y":1}, {"x":9, "y":1}, {"x":10, "y":1}, {"x":11, "y":1}, {"x":12, "y":1}, {"x":13, "y":1}, {"x":14, "y":1}, {"x":15, "y":1}, {"x":16, "y":1}, {"x":17, "y":1}, {"x":18, "y":1}, {"x":0, "y":2, "w":1.5}, {"x":1.5, "y":2}, {"x":2.5, "y":2}, {"x":3.5, "y":2}, {"x":4.5, "y":2}, {"x":5.5, "y":2}, {"x":6.5, "y":2}, {"x":7.5, "y":2}, {"x":8.5, "y":2}, {"x":9.5, "y":2}, {"x":10.5, "y":2}, {"x":11.5, "y":2}, {"x":12.5, "y":2}, {"x":13.5, "y":2, "w":1.5}, {"x":15, "y":2}, {"x":16, "y":2}, {"x":17, "y":2}, {"x":18, "y":2}, {"x":0, "y":3, "w":1.75}, {"x":1.75, "y":3}, {"x":2.75, "y":3}, {"x":3.75, "y":3}, {"x":4.75, "y":3}, {"x":5.75, "y":3}, {"x":6.75, "y":3}, {"x":7.75, "y":3}, {"x":8.75, "y":3}, {"x":9.75, "y":3}, {"x":10.75, "y":3}, {"x":11.75, "y":3}, {"x":12.75, "y":3}, {"x":13.75, "y":3, "w":1.25}, {"x":15, "y":3}, {"x":16, "y":3}, {"x":17, "y":3}, {"x":18, "y":3}, {"x":0, "y":4, "w":1.25}, {"x":1.25, "y":4}, {"x":2.25, "y":4}, {"x":3.25, "y":4}, {"x":4.25, "y":4}, {"x":5.25, "y":4}, {"x":6.25, "y":4}, {"x":7.25, "y":4}, {"x":8.25, "y":4}, {"x":9.25, "y":4}, {"x":10.25, "y":4}, {"x":11.25, "y":4}, {"x":12.25, "y":4, "w":1.75}, {"x":14, "y":4}, {"x":15, "y":4}, {"x":16, "y":4}, {"x":17, "y":4}, {"x":18, "y":4}, {"x":0, "y":5, "w":1.25}, {"x":1.25, "y":5, "w":1.25}, {"x":2.5, "y":5, "w":1.25}, {"x":3.75, "y":5, "w":6.25}, {"x":10, "y":5}, {"x":11, "y":5}, {"x":12, "y":5}, {"x":13, "y":5}, {"x":14, "y":5}, {"x":15, "y":5}, {"x":16, "y":5}, {"x":17, "y":5}, {"x":18, "y":5}] + }, + + "LAYOUT_96_ansi": { + "layout": [{"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":4, "y":0}, {"x":5, "y":0}, {"x":6, "y":0}, {"x":7, "y":0}, {"x":8, "y":0}, {"x":9, "y":0}, {"x":10, "y":0}, {"x":11, "y":0}, {"x":12, "y":0}, {"x":13, "y":0}, {"x":14, "y":0}, {"x":15, "y":0}, {"x":16, "y":0}, {"x":17, "y":0}, {"x":18, "y":0}, {"x":0, "y":1}, {"x":1, "y":1}, {"x":2, "y":1}, {"x":3, "y":1}, {"x":4, "y":1}, {"x":5, "y":1}, {"x":6, "y":1}, {"x":7, "y":1}, {"x":8, "y":1}, {"x":9, "y":1}, {"x":10, "y":1}, {"x":11, "y":1}, {"x":12, "y":1}, {"x":13, "y":1, "w":2}, {"x":15, "y":1}, {"x":16, "y":1}, {"x":17, "y":1}, {"x":18, "y":1}, {"x":0, "y":2, "w":1.5}, {"x":1.5, "y":2}, {"x":2.5, "y":2}, {"x":3.5, "y":2}, {"x":4.5, "y":2}, {"x":5.5, "y":2}, {"x":6.5, "y":2}, {"x":7.5, "y":2}, {"x":8.5, "y":2}, {"x":9.5, "y":2}, {"x":10.5, "y":2}, {"x":11.5, "y":2}, {"x":12.5, "y":2}, {"x":13.5, "y":2, "w":1.5}, {"x":15, "y":2}, {"x":16, "y":2}, {"x":17, "y":2}, {"x":18, "y":2}, {"x":0, "y":3, "w":1.75}, {"x":1.75, "y":3}, {"x":2.75, "y":3}, {"x":3.75, "y":3}, {"x":4.75, "y":3}, {"x":5.75, "y":3}, {"x":6.75, "y":3}, {"x":7.75, "y":3}, {"x":8.75, "y":3}, {"x":9.75, "y":3}, {"x":10.75, "y":3}, {"x":11.75, "y":3}, {"x":12.75, "y":3, "w":2.25}, {"x":15, "y":3}, {"x":16, "y":3}, {"x":17, "y":3}, {"x":18, "y":3}, {"x":0, "y":4, "w":2.25}, {"x":2.25, "y":4}, {"x":3.25, "y":4}, {"x":4.25, "y":4}, {"x":5.25, "y":4}, {"x":6.25, "y":4}, {"x":7.25, "y":4}, {"x":8.25, "y":4}, {"x":9.25, "y":4}, {"x":10.25, "y":4}, {"x":11.25, "y":4}, {"x":12.25, "y":4, "w":1.75}, {"x":14, "y":4}, {"x":15, "y":4}, {"x":16, "y":4}, {"x":17, "y":4}, {"x":0, "y":5, "w":1.25}, {"x":1.25, "y":5, "w":1.25}, {"x":2.5, "y":5, "w":1.25}, {"x":3.75, "y":5, "w":6.25}, {"x":10, "y":5, "w":1.5}, {"x":11.5, "y":5, "w":1.5}, {"x":13, "y":5}, {"x":14, "y":5}, {"x":15, "y":5}, {"x":16, "y":5}, {"x":17, "y":5}, {"x":18, "y":4, "h":2}] + } + } +} diff --git a/keyboards/donutcables/budget96/keymaps/default/config.h b/keyboards/donutcables/budget96/keymaps/default/config.h new file mode 100644 index 00000000000..a3ed4f762a6 --- /dev/null +++ b/keyboards/donutcables/budget96/keymaps/default/config.h @@ -0,0 +1,19 @@ +/* Copyright 2018 MechMerlin + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#pragma once + +// place overrides here diff --git a/keyboards/donutcables/budget96/keymaps/default/keymap.c b/keyboards/donutcables/budget96/keymaps/default/keymap.c new file mode 100644 index 00000000000..dcb79780e08 --- /dev/null +++ b/keyboards/donutcables/budget96/keymaps/default/keymap.c @@ -0,0 +1,35 @@ +/* Copyright 2018 MechMerlin + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ +#include QMK_KEYBOARD_H + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { +[0] = LAYOUT_96_ansi(\ + KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR, KC_NLCK, KC_INS, KC_HOME, KC_PGUP, KC_PSLS, \ + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_END, KC_PGDN, KC_PSLS, KC_PAST, \ + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_P7, KC_P8, KC_P9, KC_PMNS, \ + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_P4, KC_P5, KC_P6, KC_PPLS, \ + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_P1, KC_P2, KC_P3, \ + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, MO(1), KC_LEFT, KC_DOWN, KC_RIGHT, KC_P0, KC_PDOT, KC_PENT), \ + +[1] = LAYOUT_96_ansi(\ + RESET, EEP_RST, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \ + BL_TOGG, BL_STEP, BL_ON, BL_OFF, BL_INC, BL_DEC, BL_BRTG, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \ + RGB_TOG, RGB_MOD, RGB_HUI, RGB_SAI, RGB_VAI, RGB_SPI, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \ + KC_TRNS, RGB_RMOD, RGB_HUD, RGB_SAD, RGB_VAD, RGB_SPD, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \ + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \ + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS), \ +}; + diff --git a/keyboards/donutcables/budget96/keymaps/default/readme.md b/keyboards/donutcables/budget96/keymaps/default/readme.md new file mode 100644 index 00000000000..acbac7b4e0b --- /dev/null +++ b/keyboards/donutcables/budget96/keymaps/default/readme.md @@ -0,0 +1 @@ +# The default keymap for budget96 diff --git a/keyboards/donutcables/budget96/readme.md b/keyboards/donutcables/budget96/readme.md new file mode 100644 index 00000000000..e44b9a3e72f --- /dev/null +++ b/keyboards/donutcables/budget96/readme.md @@ -0,0 +1,44 @@ +# budget96 + +96 key atmega32a keyboard. + +Keyboard Maintainer: [MechMerlin](https://github.com/mechmerlin) +Hardware Supported: Budget96 PCB +Hardware Availability: [DonutCables](https://donutcables.com/) + +Make example for this keyboard (after setting up your build environment): + + make donutcables/budget96:default + +Flashing + +**Reset Key:** Hold down the key located at `K00`, commonly programmed as left control while plugging in the keyboard. You may also hold down the key located at `K50`, commonly programmed as the `Esc` key. + +ps2avr(GB) boards use an atmega32a microcontroller and a different bootloader. It is not flashable using the regular QMK methods. + +Windows: +1. Download [HIDBootFlash](http://vusb.wikidot.com/project:hidbootflash). +2. Place your keyboard into reset. +3. Press the `Find Device` button and ensure that your keyboard is found. +4. Press the `Open .hex File` button and locate the `.hex` file you created. +5. Press the `Flash Device` button and wait for the process to complete. + +macOS: +1. Install homebrew by typing the following: + ``` + /usr/bin/ruby -e "$(curl -fsSL https://raw.githubusercontent.com/Homebrew/install/master/install)" + ``` +2. Install `crosspack-avr`. + ``` + brew cask install crosspack-avr + ``` +3. Install the following packages: + ``` + brew install python + pip3 install pyusb + brew install --HEAD https://raw.githubusercontent.com/robertgzr/homebrew-tap/master/bootloadhid.rb + +4. Place your keyboard into reset. +5. Flash the board by typing `bootloadHID -r` followed by the path to your `.hex` file. + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/donutcables/budget96/rules.mk b/keyboards/donutcables/budget96/rules.mk new file mode 100644 index 00000000000..e25b037279d --- /dev/null +++ b/keyboards/donutcables/budget96/rules.mk @@ -0,0 +1,49 @@ +# Copyright 2017 Luiz Ribeiro +# +# This program is free software: you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation, either version 2 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program. If not, see . + +# MCU name +MCU = atmega32a +PROTOCOL = VUSB + +# unsupported features for now +NO_UART = yes +NO_SUSPEND_POWER_DOWN = yes + +# processor frequency +F_CPU = 12000000 + +# Bootloader +# This definition is optional, and if your keyboard supports multiple bootloaders of +# different sizes, comment this out, and the correct address will be loaded +# automatically (+60). See bootloader.mk for all options. +BOOTLOADER = bootloadHID + +# build options +BOOTMAGIC_ENABLE = lite +MOUSEKEY_ENABLE = yes +EXTRAKEY_ENABLE = yes +CONSOLE_ENABLE = yes +COMMAND_ENABLE = yes +BACKLIGHT_ENABLE = yes +RGBLIGHT_ENABLE = yes +RGBLIGHT_CUSTOM_DRIVER = yes + +OPT_DEFS = -DDEBUG_LEVEL=0 + +# custom matrix setup +SRC = i2c.c + +# programming options +PROGRAM_CMD = ./util/atmega32a_program.py $(TARGET).hex diff --git a/keyboards/donutcables/budget96/usbconfig.h b/keyboards/donutcables/budget96/usbconfig.h new file mode 100644 index 00000000000..223b69bb94c --- /dev/null +++ b/keyboards/donutcables/budget96/usbconfig.h @@ -0,0 +1,394 @@ +/* Name: usbconfig.h + * Project: V-USB, virtual USB port for Atmel's(r) AVR(r) microcontrollers + * Author: Christian Starkjohann + * Creation Date: 2005-04-01 + * Tabsize: 4 + * Copyright: (c) 2005 by OBJECTIVE DEVELOPMENT Software GmbH + * License: GNU GPL v2 (see License.txt), GNU GPL v3 or proprietary (CommercialLicense.txt) + * This Revision: $Id: usbconfig-prototype.h 785 2010-05-30 17:57:07Z cs $ + */ + +#pragma once + +#include "config.h" + +/* +General Description: +This file is an example configuration (with inline documentation) for the USB +driver. It configures V-USB for USB D+ connected to Port D bit 2 (which is +also hardware interrupt 0 on many devices) and USB D- to Port D bit 4. You may +wire the lines to any other port, as long as D+ is also wired to INT0 (or any +other hardware interrupt, as long as it is the highest level interrupt, see +section at the end of this file). +*/ + +/* ---------------------------- Hardware Config ---------------------------- */ + +#define USB_CFG_IOPORTNAME D +/* This is the port where the USB bus is connected. When you configure it to + * "B", the registers PORTB, PINB and DDRB will be used. + */ +#define USB_CFG_DMINUS_BIT 3 +/* This is the bit number in USB_CFG_IOPORT where the USB D- line is connected. + * This may be any bit in the port. + */ +#define USB_CFG_DPLUS_BIT 2 +/* This is the bit number in USB_CFG_IOPORT where the USB D+ line is connected. + * This may be any bit in the port. Please note that D+ must also be connected + * to interrupt pin INT0! [You can also use other interrupts, see section + * "Optional MCU Description" below, or you can connect D- to the interrupt, as + * it is required if you use the USB_COUNT_SOF feature. If you use D- for the + * interrupt, the USB interrupt will also be triggered at Start-Of-Frame + * markers every millisecond.] + */ +#define USB_CFG_CLOCK_KHZ (F_CPU/1000) +/* Clock rate of the AVR in kHz. Legal values are 12000, 12800, 15000, 16000, + * 16500, 18000 and 20000. The 12.8 MHz and 16.5 MHz versions of the code + * require no crystal, they tolerate +/- 1% deviation from the nominal + * frequency. All other rates require a precision of 2000 ppm and thus a + * crystal! + * Since F_CPU should be defined to your actual clock rate anyway, you should + * not need to modify this setting. + */ +#define USB_CFG_CHECK_CRC 0 +/* Define this to 1 if you want that the driver checks integrity of incoming + * data packets (CRC checks). CRC checks cost quite a bit of code size and are + * currently only available for 18 MHz crystal clock. You must choose + * USB_CFG_CLOCK_KHZ = 18000 if you enable this option. + */ + +/* ----------------------- Optional Hardware Config ------------------------ */ + +/* #define USB_CFG_PULLUP_IOPORTNAME D */ +/* If you connect the 1.5k pullup resistor from D- to a port pin instead of + * V+, you can connect and disconnect the device from firmware by calling + * the macros usbDeviceConnect() and usbDeviceDisconnect() (see usbdrv.h). + * This constant defines the port on which the pullup resistor is connected. + */ +/* #define USB_CFG_PULLUP_BIT 4 */ +/* This constant defines the bit number in USB_CFG_PULLUP_IOPORT (defined + * above) where the 1.5k pullup resistor is connected. See description + * above for details. + */ + +/* --------------------------- Functional Range ---------------------------- */ + +#define USB_CFG_HAVE_INTRIN_ENDPOINT 1 +/* Define this to 1 if you want to compile a version with two endpoints: The + * default control endpoint 0 and an interrupt-in endpoint (any other endpoint + * number). + */ +#define USB_CFG_HAVE_INTRIN_ENDPOINT3 1 +/* Define this to 1 if you want to compile a version with three endpoints: The + * default control endpoint 0, an interrupt-in endpoint 3 (or the number + * configured below) and a catch-all default interrupt-in endpoint as above. + * You must also define USB_CFG_HAVE_INTRIN_ENDPOINT to 1 for this feature. + */ +#define USB_CFG_EP3_NUMBER 3 +/* If the so-called endpoint 3 is used, it can now be configured to any other + * endpoint number (except 0) with this macro. Default if undefined is 3. + */ +/* #define USB_INITIAL_DATATOKEN USBPID_DATA1 */ +/* The above macro defines the startup condition for data toggling on the + * interrupt/bulk endpoints 1 and 3. Defaults to USBPID_DATA1. + * Since the token is toggled BEFORE sending any data, the first packet is + * sent with the oposite value of this configuration! + */ +#define USB_CFG_IMPLEMENT_HALT 0 +/* Define this to 1 if you also want to implement the ENDPOINT_HALT feature + * for endpoint 1 (interrupt endpoint). Although you may not need this feature, + * it is required by the standard. We have made it a config option because it + * bloats the code considerably. + */ +#define USB_CFG_SUPPRESS_INTR_CODE 0 +/* Define this to 1 if you want to declare interrupt-in endpoints, but don't + * want to send any data over them. If this macro is defined to 1, functions + * usbSetInterrupt() and usbSetInterrupt3() are omitted. This is useful if + * you need the interrupt-in endpoints in order to comply to an interface + * (e.g. HID), but never want to send any data. This option saves a couple + * of bytes in flash memory and the transmit buffers in RAM. + */ +#define USB_CFG_INTR_POLL_INTERVAL 1 +/* If you compile a version with endpoint 1 (interrupt-in), this is the poll + * interval. The value is in milliseconds and must not be less than 10 ms for + * low speed devices. + */ +#define USB_CFG_IS_SELF_POWERED 0 +/* Define this to 1 if the device has its own power supply. Set it to 0 if the + * device is powered from the USB bus. + */ +#define USB_CFG_MAX_BUS_POWER 500 +/* Set this variable to the maximum USB bus power consumption of your device. + * The value is in milliamperes. [It will be divided by two since USB + * communicates power requirements in units of 2 mA.] + */ +#define USB_CFG_IMPLEMENT_FN_WRITE 1 +/* Set this to 1 if you want usbFunctionWrite() to be called for control-out + * transfers. Set it to 0 if you don't need it and want to save a couple of + * bytes. + */ +#define USB_CFG_IMPLEMENT_FN_READ 0 +/* Set this to 1 if you need to send control replies which are generated + * "on the fly" when usbFunctionRead() is called. If you only want to send + * data from a static buffer, set it to 0 and return the data from + * usbFunctionSetup(). This saves a couple of bytes. + */ +#define USB_CFG_IMPLEMENT_FN_WRITEOUT 0 +/* Define this to 1 if you want to use interrupt-out (or bulk out) endpoints. + * You must implement the function usbFunctionWriteOut() which receives all + * interrupt/bulk data sent to any endpoint other than 0. The endpoint number + * can be found in 'usbRxToken'. + */ +#define USB_CFG_HAVE_FLOWCONTROL 0 +/* Define this to 1 if you want flowcontrol over USB data. See the definition + * of the macros usbDisableAllRequests() and usbEnableAllRequests() in + * usbdrv.h. + */ +#define USB_CFG_DRIVER_FLASH_PAGE 0 +/* If the device has more than 64 kBytes of flash, define this to the 64 k page + * where the driver's constants (descriptors) are located. Or in other words: + * Define this to 1 for boot loaders on the ATMega128. + */ +#define USB_CFG_LONG_TRANSFERS 0 +/* Define this to 1 if you want to send/receive blocks of more than 254 bytes + * in a single control-in or control-out transfer. Note that the capability + * for long transfers increases the driver size. + */ +/* #define USB_RX_USER_HOOK(data, len) if(usbRxToken == (uchar)USBPID_SETUP) blinkLED(); */ +/* This macro is a hook if you want to do unconventional things. If it is + * defined, it's inserted at the beginning of received message processing. + * If you eat the received message and don't want default processing to + * proceed, do a return after doing your things. One possible application + * (besides debugging) is to flash a status LED on each packet. + */ +/* #define USB_RESET_HOOK(resetStarts) if(!resetStarts){hadUsbReset();} */ +/* This macro is a hook if you need to know when an USB RESET occurs. It has + * one parameter which distinguishes between the start of RESET state and its + * end. + */ +/* #define USB_SET_ADDRESS_HOOK() hadAddressAssigned(); */ +/* This macro (if defined) is executed when a USB SET_ADDRESS request was + * received. + */ +#define USB_COUNT_SOF 1 +/* define this macro to 1 if you need the global variable "usbSofCount" which + * counts SOF packets. This feature requires that the hardware interrupt is + * connected to D- instead of D+. + */ +/* #ifdef __ASSEMBLER__ + * macro myAssemblerMacro + * in YL, TCNT0 + * sts timer0Snapshot, YL + * endm + * #endif + * #define USB_SOF_HOOK myAssemblerMacro + * This macro (if defined) is executed in the assembler module when a + * Start Of Frame condition is detected. It is recommended to define it to + * the name of an assembler macro which is defined here as well so that more + * than one assembler instruction can be used. The macro may use the register + * YL and modify SREG. If it lasts longer than a couple of cycles, USB messages + * immediately after an SOF pulse may be lost and must be retried by the host. + * What can you do with this hook? Since the SOF signal occurs exactly every + * 1 ms (unless the host is in sleep mode), you can use it to tune OSCCAL in + * designs running on the internal RC oscillator. + * Please note that Start Of Frame detection works only if D- is wired to the + * interrupt, not D+. THIS IS DIFFERENT THAN MOST EXAMPLES! + */ +#define USB_CFG_CHECK_DATA_TOGGLING 0 +/* define this macro to 1 if you want to filter out duplicate data packets + * sent by the host. Duplicates occur only as a consequence of communication + * errors, when the host does not receive an ACK. Please note that you need to + * implement the filtering yourself in usbFunctionWriteOut() and + * usbFunctionWrite(). Use the global usbCurrentDataToken and a static variable + * for each control- and out-endpoint to check for duplicate packets. + */ +#define USB_CFG_HAVE_MEASURE_FRAME_LENGTH 0 +/* define this macro to 1 if you want the function usbMeasureFrameLength() + * compiled in. This function can be used to calibrate the AVR's RC oscillator. + */ +#define USB_USE_FAST_CRC 0 +/* The assembler module has two implementations for the CRC algorithm. One is + * faster, the other is smaller. This CRC routine is only used for transmitted + * messages where timing is not critical. The faster routine needs 31 cycles + * per byte while the smaller one needs 61 to 69 cycles. The faster routine + * may be worth the 32 bytes bigger code size if you transmit lots of data and + * run the AVR close to its limit. + */ + +/* -------------------------- Device Description --------------------------- */ + +#define USB_CFG_VENDOR_ID (VENDOR_ID & 0xFF), ((VENDOR_ID >> 8) & 0xFF) +/* USB vendor ID for the device, low byte first. If you have registered your + * own Vendor ID, define it here. Otherwise you may use one of obdev's free + * shared VID/PID pairs. Be sure to read USB-IDs-for-free.txt for rules! + * *** IMPORTANT NOTE *** + * This template uses obdev's shared VID/PID pair for Vendor Class devices + * with libusb: 0x16c0/0x5dc. Use this VID/PID pair ONLY if you understand + * the implications! + */ +#define USB_CFG_DEVICE_ID (PRODUCT_ID & 0xFF), ((PRODUCT_ID >> 8) & 0xFF) +/* This is the ID of the product, low byte first. It is interpreted in the + * scope of the vendor ID. If you have registered your own VID with usb.org + * or if you have licensed a PID from somebody else, define it here. Otherwise + * you may use one of obdev's free shared VID/PID pairs. See the file + * USB-IDs-for-free.txt for details! + * *** IMPORTANT NOTE *** + * This template uses obdev's shared VID/PID pair for Vendor Class devices + * with libusb: 0x16c0/0x5dc. Use this VID/PID pair ONLY if you understand + * the implications! + */ +#define USB_CFG_DEVICE_VERSION 0x00, 0x02 +/* Version number of the device: Minor number first, then major number. + */ +#define USB_CFG_VENDOR_NAME 'D', 'o', 'n', 'u', 't', 'C', 'a', 'b', 'l', 'e', 's' +#define USB_CFG_VENDOR_NAME_LEN 11 +/* These two values define the vendor name returned by the USB device. The name + * must be given as a list of characters under single quotes. The characters + * are interpreted as Unicode (UTF-16) entities. + * If you don't want a vendor name string, undefine these macros. + * ALWAYS define a vendor name containing your Internet domain name if you use + * obdev's free shared VID/PID pair. See the file USB-IDs-for-free.txt for + * details. + */ +#define USB_CFG_DEVICE_NAME 'b', 'u', 'd', 'g', 'e', 't', '9', '6' +#define USB_CFG_DEVICE_NAME_LEN 8 +/* Same as above for the device name. If you don't want a device name, undefine + * the macros. See the file USB-IDs-for-free.txt before you assign a name if + * you use a shared VID/PID. + */ +/*#define USB_CFG_SERIAL_NUMBER 'N', 'o', 'n', 'e' */ +/*#define USB_CFG_SERIAL_NUMBER_LEN 0 */ +/* Same as above for the serial number. If you don't want a serial number, + * undefine the macros. + * It may be useful to provide the serial number through other means than at + * compile time. See the section about descriptor properties below for how + * to fine tune control over USB descriptors such as the string descriptor + * for the serial number. + */ +#define USB_CFG_DEVICE_CLASS 0 +#define USB_CFG_DEVICE_SUBCLASS 0 +/* See USB specification if you want to conform to an existing device class. + * Class 0xff is "vendor specific". + */ +#define USB_CFG_INTERFACE_CLASS 3 /* HID */ +#define USB_CFG_INTERFACE_SUBCLASS 1 /* Boot */ +#define USB_CFG_INTERFACE_PROTOCOL 1 /* Keyboard */ +/* See USB specification if you want to conform to an existing device class or + * protocol. The following classes must be set at interface level: + * HID class is 3, no subclass and protocol required (but may be useful!) + * CDC class is 2, use subclass 2 and protocol 1 for ACM + */ +#define USB_CFG_HID_REPORT_DESCRIPTOR_LENGTH 0 +/* Define this to the length of the HID report descriptor, if you implement + * an HID device. Otherwise don't define it or define it to 0. + * If you use this define, you must add a PROGMEM character array named + * "usbHidReportDescriptor" to your code which contains the report descriptor. + * Don't forget to keep the array and this define in sync! + */ + +/* #define USB_PUBLIC static */ +/* Use the define above if you #include usbdrv.c instead of linking against it. + * This technique saves a couple of bytes in flash memory. + */ + +/* ------------------- Fine Control over USB Descriptors ------------------- */ +/* If you don't want to use the driver's default USB descriptors, you can + * provide our own. These can be provided as (1) fixed length static data in + * flash memory, (2) fixed length static data in RAM or (3) dynamically at + * runtime in the function usbFunctionDescriptor(). See usbdrv.h for more + * information about this function. + * Descriptor handling is configured through the descriptor's properties. If + * no properties are defined or if they are 0, the default descriptor is used. + * Possible properties are: + * + USB_PROP_IS_DYNAMIC: The data for the descriptor should be fetched + * at runtime via usbFunctionDescriptor(). If the usbMsgPtr mechanism is + * used, the data is in FLASH by default. Add property USB_PROP_IS_RAM if + * you want RAM pointers. + * + USB_PROP_IS_RAM: The data returned by usbFunctionDescriptor() or found + * in static memory is in RAM, not in flash memory. + * + USB_PROP_LENGTH(len): If the data is in static memory (RAM or flash), + * the driver must know the descriptor's length. The descriptor itself is + * found at the address of a well known identifier (see below). + * List of static descriptor names (must be declared PROGMEM if in flash): + * char usbDescriptorDevice[]; + * char usbDescriptorConfiguration[]; + * char usbDescriptorHidReport[]; + * char usbDescriptorString0[]; + * int usbDescriptorStringVendor[]; + * int usbDescriptorStringDevice[]; + * int usbDescriptorStringSerialNumber[]; + * Other descriptors can't be provided statically, they must be provided + * dynamically at runtime. + * + * Descriptor properties are or-ed or added together, e.g.: + * #define USB_CFG_DESCR_PROPS_DEVICE (USB_PROP_IS_RAM | USB_PROP_LENGTH(18)) + * + * The following descriptors are defined: + * USB_CFG_DESCR_PROPS_DEVICE + * USB_CFG_DESCR_PROPS_CONFIGURATION + * USB_CFG_DESCR_PROPS_STRINGS + * USB_CFG_DESCR_PROPS_STRING_0 + * USB_CFG_DESCR_PROPS_STRING_VENDOR + * USB_CFG_DESCR_PROPS_STRING_PRODUCT + * USB_CFG_DESCR_PROPS_STRING_SERIAL_NUMBER + * USB_CFG_DESCR_PROPS_HID + * USB_CFG_DESCR_PROPS_HID_REPORT + * USB_CFG_DESCR_PROPS_UNKNOWN (for all descriptors not handled by the driver) + * + * Note about string descriptors: String descriptors are not just strings, they + * are Unicode strings prefixed with a 2 byte header. Example: + * int serialNumberDescriptor[] = { + * USB_STRING_DESCRIPTOR_HEADER(6), + * 'S', 'e', 'r', 'i', 'a', 'l' + * }; + */ + +#define USB_CFG_DESCR_PROPS_DEVICE 0 +#define USB_CFG_DESCR_PROPS_CONFIGURATION USB_PROP_IS_DYNAMIC +//#define USB_CFG_DESCR_PROPS_CONFIGURATION 0 +#define USB_CFG_DESCR_PROPS_STRINGS 0 +#define USB_CFG_DESCR_PROPS_STRING_0 0 +#define USB_CFG_DESCR_PROPS_STRING_VENDOR 0 +#define USB_CFG_DESCR_PROPS_STRING_PRODUCT 0 +#define USB_CFG_DESCR_PROPS_STRING_SERIAL_NUMBER 0 +#define USB_CFG_DESCR_PROPS_HID USB_PROP_IS_DYNAMIC +//#define USB_CFG_DESCR_PROPS_HID 0 +#define USB_CFG_DESCR_PROPS_HID_REPORT USB_PROP_IS_DYNAMIC +//#define USB_CFG_DESCR_PROPS_HID_REPORT 0 +#define USB_CFG_DESCR_PROPS_UNKNOWN 0 + +#define usbMsgPtr_t unsigned short +/* If usbMsgPtr_t is not defined, it defaults to 'uchar *'. We define it to + * a scalar type here because gcc generates slightly shorter code for scalar + * arithmetics than for pointer arithmetics. Remove this define for backward + * type compatibility or define it to an 8 bit type if you use data in RAM only + * and all RAM is below 256 bytes (tiny memory model in IAR CC). + */ + +/* ----------------------- Optional MCU Description ------------------------ */ + +/* The following configurations have working defaults in usbdrv.h. You + * usually don't need to set them explicitly. Only if you want to run + * the driver on a device which is not yet supported or with a compiler + * which is not fully supported (such as IAR C) or if you use a differnt + * interrupt than INT0, you may have to define some of these. + */ +/* #define USB_INTR_CFG MCUCR */ +/* #define USB_INTR_CFG_SET ((1 << ISC00) | (1 << ISC01)) */ +/* #define USB_INTR_CFG_CLR 0 */ +/* #define USB_INTR_ENABLE GIMSK */ +/* #define USB_INTR_ENABLE_BIT INT0 */ +/* #define USB_INTR_PENDING GIFR */ +/* #define USB_INTR_PENDING_BIT INTF0 */ +/* #define USB_INTR_VECTOR INT0_vect */ + +/* Set INT1 for D- falling edge to count SOF */ +/* #define USB_INTR_CFG EICRA */ +#define USB_INTR_CFG_SET ((1 << ISC11) | (0 << ISC10)) +/* #define USB_INTR_CFG_CLR 0 */ +/* #define USB_INTR_ENABLE EIMSK */ +#define USB_INTR_ENABLE_BIT INT1 +/* #define USB_INTR_PENDING EIFR */ +#define USB_INTR_PENDING_BIT INTF1 +#define USB_INTR_VECTOR INT1_vect + diff --git a/keyboards/donutcables/readme.md b/keyboards/donutcables/readme.md new file mode 100644 index 00000000000..d68b6a743cc --- /dev/null +++ b/keyboards/donutcables/readme.md @@ -0,0 +1,12 @@ +# Donut Cables + +Donut Cables LLC is located in North Carolina, USA. + +Website: https://donutcables.com/ + +**Contact Donut Cables at the following:** + +Email: contact@donutcables.com +Reddit: /u/donutcat_cables +Geekhack/DeskThority: donutcat +Discord: @donutcat on the #mechkeys Discord \ No newline at end of file From 60668ef39deab4634dbe7fc1119d9de5ee751b28 Mon Sep 17 00:00:00 2001 From: stanrc85 <47038504+stanrc85@users.noreply.github.com> Date: Thu, 4 Apr 2019 17:41:55 -0400 Subject: [PATCH 029/171] [Keymap] Additional RGB options set (#5551) * Add new RGB backlight options to config * Add new RGB options --- keyboards/hs60/v2/keymaps/stanrc85/config.h | 19 +++++++++++++++++++ 1 file changed, 19 insertions(+) diff --git a/keyboards/hs60/v2/keymaps/stanrc85/config.h b/keyboards/hs60/v2/keymaps/stanrc85/config.h index 4576211f102..5aab3098c7d 100644 --- a/keyboards/hs60/v2/keymaps/stanrc85/config.h +++ b/keyboards/hs60/v2/keymaps/stanrc85/config.h @@ -20,3 +20,22 @@ #define RGB_BACKLIGHT_ALPHAS_MODS_ROW_2 0b0011000000000001 //Setting \ key to "MOD" instead of "ALPHA" for lighting #define RGB_BACKLIGHT_ALPHAS_MODS_ROW_3 0b0010000000000001 #define RGB_BACKLIGHT_ALPHAS_MODS_ROW_4 0b0011110000000111 + +#undef RGB_BACKLIGHT_CAPS_LOCK_INDICATOR +#undef RGB_BACKLIGHT_LAYER_1_INDICATOR +#undef RGB_BACKLIGHT_LAYER_2_INDICATOR +#undef RGB_BACKLIGHT_LAYER_3_INDICATOR + +#define RGB_BACKLIGHT_CAPS_LOCK_INDICATOR { .color = { .h = 200, .s = 255 }, .index = 3-1 } //purple +#define RGB_BACKLIGHT_LAYER_1_INDICATOR { .color = { .h = 100, .s = 255 }, .index = 60-1 } //green +#define RGB_BACKLIGHT_LAYER_2_INDICATOR { .color = { .h = 150, .s = 255 }, .index = 60-1 } //blue +#define RGB_BACKLIGHT_LAYER_3_INDICATOR { .color = { .h = 0, .s = 0 }, .index = 60-1 } //white + +#undef RGB_BACKLIGHT_BRIGHTNESS +#define RGB_BACKLIGHT_BRIGHTNESS 175 + +#undef RGB_BACKLIGHT_COLOR_1 +#undef RGB_BACKLIGHT_COLOR_2 + +#define RGB_BACKLIGHT_COLOR_1 { .h = 0, .s = 255 } +#define RGB_BACKLIGHT_COLOR_2 { .h = 150, .s = 255 } From 7e5c107d43890eb517184d6fddff9a6da165fc3d Mon Sep 17 00:00:00 2001 From: MechMerlin <30334081+mechmerlin@users.noreply.github.com> Date: Thu, 4 Apr 2019 15:16:59 -0700 Subject: [PATCH 030/171] [Keyboard] Move scrabblepad into donutcables directory (#5553) * move scrabblepad into donutcables directory * use pragma once * update scrabblepad readme --- keyboards/{ => donutcables}/scrabblepad/config.h | 7 ++----- keyboards/{ => donutcables}/scrabblepad/info.json | 0 .../{ => donutcables}/scrabblepad/keymaps/default/config.h | 0 .../{ => donutcables}/scrabblepad/keymaps/default/keymap.c | 0 .../scrabblepad/keymaps/default/readme.md | 0 .../{ => donutcables}/scrabblepad/keymaps/random/keymap.c | 0 .../{ => donutcables}/scrabblepad/keymaps/random/readme.md | 0 keyboards/{ => donutcables}/scrabblepad/readme.md | 4 ++-- keyboards/{ => donutcables}/scrabblepad/rules.mk | 0 keyboards/{ => donutcables}/scrabblepad/scrabblepad.c | 0 keyboards/{ => donutcables}/scrabblepad/scrabblepad.h | 5 +---- 11 files changed, 5 insertions(+), 11 deletions(-) rename keyboards/{ => donutcables}/scrabblepad/config.h (98%) rename keyboards/{ => donutcables}/scrabblepad/info.json (100%) rename keyboards/{ => donutcables}/scrabblepad/keymaps/default/config.h (100%) rename keyboards/{ => donutcables}/scrabblepad/keymaps/default/keymap.c (100%) rename keyboards/{ => donutcables}/scrabblepad/keymaps/default/readme.md (100%) rename keyboards/{ => donutcables}/scrabblepad/keymaps/random/keymap.c (100%) rename keyboards/{ => donutcables}/scrabblepad/keymaps/random/readme.md (100%) rename keyboards/{ => donutcables}/scrabblepad/readme.md (67%) rename keyboards/{ => donutcables}/scrabblepad/rules.mk (100%) rename keyboards/{ => donutcables}/scrabblepad/scrabblepad.c (100%) rename keyboards/{ => donutcables}/scrabblepad/scrabblepad.h (98%) diff --git a/keyboards/scrabblepad/config.h b/keyboards/donutcables/scrabblepad/config.h similarity index 98% rename from keyboards/scrabblepad/config.h rename to keyboards/donutcables/scrabblepad/config.h index 8c23ccdabd4..bf3d3db72a8 100644 --- a/keyboards/scrabblepad/config.h +++ b/keyboards/donutcables/scrabblepad/config.h @@ -15,8 +15,7 @@ You should have received a copy of the GNU General Public License along with this program. If not, see . */ -#ifndef CONFIG_H -#define CONFIG_H +#pragma once #include "config_common.h" @@ -49,7 +48,7 @@ along with this program. If not, see . /* COL2ROW, ROW2COL*/ #define DIODE_DIRECTION COL2ROW -// #define BACKLIGHT_PIN +// #define BACKLIGHT_PIN // #define BACKLIGHT_BREATHING // #define BACKLIGHT_LEVELS 3 @@ -188,5 +187,3 @@ along with this program. If not, see . /* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */ //#define MIDI_TONE_KEYCODE_OCTAVES 1 - -#endif diff --git a/keyboards/scrabblepad/info.json b/keyboards/donutcables/scrabblepad/info.json similarity index 100% rename from keyboards/scrabblepad/info.json rename to keyboards/donutcables/scrabblepad/info.json diff --git a/keyboards/scrabblepad/keymaps/default/config.h b/keyboards/donutcables/scrabblepad/keymaps/default/config.h similarity index 100% rename from keyboards/scrabblepad/keymaps/default/config.h rename to keyboards/donutcables/scrabblepad/keymaps/default/config.h diff --git a/keyboards/scrabblepad/keymaps/default/keymap.c b/keyboards/donutcables/scrabblepad/keymaps/default/keymap.c similarity index 100% rename from keyboards/scrabblepad/keymaps/default/keymap.c rename to keyboards/donutcables/scrabblepad/keymaps/default/keymap.c diff --git a/keyboards/scrabblepad/keymaps/default/readme.md b/keyboards/donutcables/scrabblepad/keymaps/default/readme.md similarity index 100% rename from keyboards/scrabblepad/keymaps/default/readme.md rename to keyboards/donutcables/scrabblepad/keymaps/default/readme.md diff --git a/keyboards/scrabblepad/keymaps/random/keymap.c b/keyboards/donutcables/scrabblepad/keymaps/random/keymap.c similarity index 100% rename from keyboards/scrabblepad/keymaps/random/keymap.c rename to keyboards/donutcables/scrabblepad/keymaps/random/keymap.c diff --git a/keyboards/scrabblepad/keymaps/random/readme.md b/keyboards/donutcables/scrabblepad/keymaps/random/readme.md similarity index 100% rename from keyboards/scrabblepad/keymaps/random/readme.md rename to keyboards/donutcables/scrabblepad/keymaps/random/readme.md diff --git a/keyboards/scrabblepad/readme.md b/keyboards/donutcables/scrabblepad/readme.md similarity index 67% rename from keyboards/scrabblepad/readme.md rename to keyboards/donutcables/scrabblepad/readme.md index 0227b988fa8..f0b05cbcedf 100644 --- a/keyboards/scrabblepad/readme.md +++ b/keyboards/donutcables/scrabblepad/readme.md @@ -12,6 +12,6 @@ Hardware Availability: [Donut Cables](https://donutcables.com/) Make example for this keyboard (after setting up your build environment): - make scrabblepad:default + make donutcables/scrabblepad:default -See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) then the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/scrabblepad/rules.mk b/keyboards/donutcables/scrabblepad/rules.mk similarity index 100% rename from keyboards/scrabblepad/rules.mk rename to keyboards/donutcables/scrabblepad/rules.mk diff --git a/keyboards/scrabblepad/scrabblepad.c b/keyboards/donutcables/scrabblepad/scrabblepad.c similarity index 100% rename from keyboards/scrabblepad/scrabblepad.c rename to keyboards/donutcables/scrabblepad/scrabblepad.c diff --git a/keyboards/scrabblepad/scrabblepad.h b/keyboards/donutcables/scrabblepad/scrabblepad.h similarity index 98% rename from keyboards/scrabblepad/scrabblepad.h rename to keyboards/donutcables/scrabblepad/scrabblepad.h index fbe0dfc7276..b4ac8b2c4f5 100644 --- a/keyboards/scrabblepad/scrabblepad.h +++ b/keyboards/donutcables/scrabblepad/scrabblepad.h @@ -13,8 +13,7 @@ * You should have received a copy of the GNU General Public License * along with this program. If not, see . */ -#ifndef SCRABBLEPAD_H -#define SCRABBLEPAD_H +#pragma once #include "quantum.h" @@ -53,5 +52,3 @@ { kD0, kD1, kD2, kD3, kD4, kD5, kD6, kD7, kD8, kD9, kDA, kDB, kDC, kDD, kDE, }, \ { kE0, kE1, kE2, kE3, kE4, kE5, kE6, kE7, kE8, kE9, kEA, kEB, kEC, kED, kEE } \ } - -#endif From dad66cad40131bbc5b7c85bdf107c664a721ba07 Mon Sep 17 00:00:00 2001 From: Alex Ong Date: Fri, 5 Apr 2019 15:44:33 +1100 Subject: [PATCH 031/171] [Keyboard] Simplified handwired/xealous since most of the features are in core now. (#5556) --- keyboards/handwired/xealous/config.h | 12 +- keyboards/handwired/xealous/debounce.c | 63 ----- keyboards/handwired/xealous/matrix.c | 329 +------------------------ keyboards/handwired/xealous/rules.mk | 6 +- 4 files changed, 12 insertions(+), 398 deletions(-) delete mode 100644 keyboards/handwired/xealous/debounce.c diff --git a/keyboards/handwired/xealous/config.h b/keyboards/handwired/xealous/config.h index 7bce502c154..251e85d4c12 100644 --- a/keyboards/handwired/xealous/config.h +++ b/keyboards/handwired/xealous/config.h @@ -20,20 +20,11 @@ along with this program. If not, see . #include "config_common.h" /* Use I2C or Serial, not both */ - #define USE_I2C -#define SCL_CLOCK 400000UL - -// #define USE_SERIAL -/* serial.c configuration for split keyboard */ -// #define SOFT_SERIAL_PIN D0 +#define SCL_CLOCK 800000UL /* Select hand configuration */ - #define MASTER_LEFT -// #define MASTER_RIGHT -// #define EE_HANDS - //#define DEBUG_MATRIX_SCAN_RATE //Use this to determine scan-rate. #define FORCE_NKRO @@ -41,6 +32,7 @@ along with this program. If not, see . #define QMK_KEYS_PER_SCAN 4 //if we press four keys simultaneously, lets process them simultaneously... #define DIODE_DIRECTION COL2ROW + #ifdef AUDIO_ENABLE #define C6_AUDIO #define STARTUP_SONG SONG(STARTUP_SOUND) diff --git a/keyboards/handwired/xealous/debounce.c b/keyboards/handwired/xealous/debounce.c deleted file mode 100644 index 65a99f27f26..00000000000 --- a/keyboards/handwired/xealous/debounce.c +++ /dev/null @@ -1,63 +0,0 @@ -#include -#include "config.h" -#include "matrix.h" -#include "timer.h" -#include "quantum.h" - -#ifndef DEBOUNCING_DELAY -# define DEBOUNCING_DELAY 5 -#endif - -//Debouncing counters -typedef uint8_t debounce_counter_t; -#define DEBOUNCE_COUNTER_MODULO 250 -#define DEBOUNCE_COUNTER_INACTIVE 251 - -static debounce_counter_t *debounce_counters; - -void debounce_init(uint8_t num_rows) -{ - debounce_counters = malloc(num_rows*MATRIX_COLS); - memset(debounce_counters, DEBOUNCE_COUNTER_INACTIVE, num_rows*MATRIX_COLS); -} - -void update_debounce_counters(uint8_t num_rows, uint8_t current_time) -{ - for (uint8_t row = 0; row < num_rows; row++) - { - for (uint8_t col = 0; col < MATRIX_COLS; col++) - { - if (debounce_counters[row*MATRIX_COLS + col] != DEBOUNCE_COUNTER_INACTIVE) - { - if (TIMER_DIFF(current_time, debounce_counters[row*MATRIX_COLS + col], DEBOUNCE_COUNTER_MODULO) >= DEBOUNCING_DELAY) { - debounce_counters[row*MATRIX_COLS + col] = DEBOUNCE_COUNTER_INACTIVE; - } - } - } - } -} - -void transfer_matrix_values(matrix_row_t raw[], matrix_row_t cooked[], uint8_t num_rows, uint8_t current_time) -{ - for (uint8_t row = 0; row < num_rows; row++) - { - matrix_row_t delta = raw[row] ^ cooked[row]; - - for (uint8_t col = 0; col < MATRIX_COLS; col++) - { - if (debounce_counters[row*MATRIX_COLS + col] == DEBOUNCE_COUNTER_INACTIVE && (delta & (1<. #include "matrix_scanrate.h" #endif - - -#ifdef USE_I2C -# include "i2c.h" -#else // USE_SERIAL -# error "only i2c supported" -#endif - -#ifndef DEBOUNCING_DELAY -# define DEBOUNCING_DELAY 5 -#endif - - -#if (MATRIX_COLS <= 8) -# define print_matrix_header() print("\nr/c 01234567\n") -# define print_matrix_row(row) print_bin_reverse8(matrix_get_row(row)) -# define matrix_bitpop(i) bitpop(matrix[i]) -# define ROW_SHIFTER ((uint8_t)1) -#else -# error "Currently only supports 8 COLS" -#endif - -#define ERROR_DISCONNECT_COUNT 5 - -#define ROWS_PER_HAND (MATRIX_ROWS/2) - -static uint8_t error_count = 0; - -static const uint8_t row_pins[MATRIX_ROWS] = MATRIX_ROW_PINS; -static const uint8_t col_pins[MATRIX_COLS] = MATRIX_COL_PINS; - -/* matrix state(1:on, 0:off) */ -static matrix_row_t matrix[MATRIX_ROWS]; -static matrix_row_t matrix_debouncing[MATRIX_ROWS]; -static matrix_row_t* debouncing_matrix_hand_offsetted; //pointer to matrix_debouncing for our hand -static matrix_row_t* matrix_hand_offsetted; // pointer to matrix for our hand - -//Debouncing counters -typedef uint8_t debounce_counter_t; -#define DEBOUNCE_COUNTER_MODULO 250 -#define DEBOUNCE_COUNTER_INACTIVE 251 -static debounce_counter_t debounce_counters[MATRIX_ROWS * MATRIX_COLS]; -static debounce_counter_t *debounce_counters_hand_offsetted; - - -#if (DIODE_DIRECTION == ROW2COL) - error "Only Col2Row supported"; -#endif -static void init_cols(void); -static void unselect_rows(void); -static void select_row(uint8_t row); -static void unselect_row(uint8_t row); -static matrix_row_t optimized_col_reader(void); - -__attribute__ ((weak)) -void matrix_init_kb(void) { - matrix_init_user(); -} - -__attribute__ ((weak)) -void matrix_scan_kb(void) { - matrix_scan_user(); -} - -__attribute__ ((weak)) -void matrix_init_user(void) { -} - -__attribute__ ((weak)) -void matrix_scan_user(void) { -} - -__attribute__ ((weak)) -void matrix_slave_scan_user(void) { -} - -inline -uint8_t matrix_rows(void) -{ - return MATRIX_ROWS; -} - -inline -uint8_t matrix_cols(void) -{ - return MATRIX_COLS; -} - -void matrix_init(void) -{ -#ifdef DISABLE_JTAG - // JTAG disable for PORT F. write JTD bit twice within four cycles. - MCUCR |= (1<= (b) ? (a) - (b) : (max) - (b) + (a)) -void update_debounce_counters(uint8_t current_time) -{ - debounce_counter_t *debounce_pointer = debounce_counters_hand_offsetted; - for (uint8_t row = 0; row < ROWS_PER_HAND; row++) - { - for (uint8_t col = 0; col < MATRIX_COLS; col++) - { - if (*debounce_pointer != DEBOUNCE_COUNTER_INACTIVE) - { - if (TIMER_DIFF(current_time, *debounce_pointer, DEBOUNCE_COUNTER_MODULO) >= - DEBOUNCING_DELAY) { - *debounce_pointer = DEBOUNCE_COUNTER_INACTIVE; - } - } - debounce_pointer++; - } - } -} - -void transfer_matrix_values(uint8_t current_time) -{ - //upload from debounce_matrix to final matrix; - debounce_counter_t *debounce_pointer = debounce_counters_hand_offsetted; - for (uint8_t row = 0; row < ROWS_PER_HAND; row++) - { - matrix_row_t row_value = matrix_hand_offsetted[row]; - matrix_row_t debounce_value = debouncing_matrix_hand_offsetted[row]; - - for (uint8_t col = 0; col < MATRIX_COLS; col++) - { - bool final_value = debounce_value & (1 << col); - bool current_value = row_value & (1 << col); - if (*debounce_pointer == DEBOUNCE_COUNTER_INACTIVE - && (current_value != final_value)) - { - *debounce_pointer = current_time; - row_value ^= (1 << col); - } - debounce_pointer++; - } - matrix_hand_offsetted[row] = row_value; - } -} - -uint8_t _matrix_scan(void) -{ - uint8_t current_time = timer_read() % DEBOUNCE_COUNTER_MODULO; - - // Set row, read cols - for (uint8_t current_row = 0; current_row < ROWS_PER_HAND; current_row++) { - select_row(current_row); - asm volatile ("nop"); asm volatile("nop"); - - debouncing_matrix_hand_offsetted[current_row] = optimized_col_reader(); - // Unselect row - unselect_row(current_row); - } - - update_debounce_counters(current_time); - transfer_matrix_values(current_time); - - return 1; -} - - -// Get rows from other half over i2c -int i2c_transaction(void) { - int slaveOffset = (isLeftHand) ? (ROWS_PER_HAND) : 0; - - int err = i2c_master_start(SLAVE_I2C_ADDRESS + I2C_WRITE); - if (err) goto i2c_error; - - // start of matrix stored at 0x00 - err = i2c_master_write(I2C_KEYMAP_START); - if (err) goto i2c_error; - - // Start read - err = i2c_master_start(SLAVE_I2C_ADDRESS + I2C_READ); - if (err) goto i2c_error; - - if (!err) { - int i; - for (i = 0; i < ROWS_PER_HAND-1; ++i) { - matrix[slaveOffset+i] = i2c_master_read(I2C_ACK); - } - matrix[slaveOffset+i] = i2c_master_read(I2C_NACK); - i2c_master_stop(); - } else { -i2c_error: // the cable is disconnceted, or something else went wrong - i2c_reset_state(); - return err; - } - - return 0; -} - -uint8_t matrix_scan(void) +void matrix_scan_user(void) { #ifdef DEBUG_MATRIX_SCAN_RATE matrix_check_scan_rate(); matrix_time_between_scans(); #endif - uint8_t ret = _matrix_scan(); - - if( i2c_transaction() ) { - // turn on the indicator led when halves are disconnected - TXLED1; - - error_count++; - - if (error_count > ERROR_DISCONNECT_COUNT) { - // reset other half if disconnected - int slaveOffset = (isLeftHand) ? (ROWS_PER_HAND) : 0; - for (int i = 0; i < ROWS_PER_HAND; ++i) { - matrix[slaveOffset+i] = 0; - } - } - } else { - // turn off the indicator led on no error - TXLED0; - error_count = 0; - } - matrix_scan_quantum(); - return ret; + } -void matrix_slave_scan(void) { - _matrix_scan(); - - int offset = (isLeftHand) ? 0 : ROWS_PER_HAND; - - for (int i = 0; i < ROWS_PER_HAND; ++i) { - i2c_slave_buffer[I2C_KEYMAP_START+i] = matrix[offset+i]; - } - - matrix_slave_scan_user(); -} - -inline -bool matrix_is_on(uint8_t row, uint8_t col) -{ - return (matrix[row] & ((matrix_row_t)1<> 4) + 1) &= ~_BV(pin & 0xF); // IN - _SFR_IO8((pin >> 4) + 2) |= _BV(pin & 0xF); // HI - } -} - -inline -static matrix_row_t optimized_col_reader(void) { +// Copy this code to split_common/matrix.c, +// and call it instead of the unoptimized col_reader. Scan-rate jumps from 1200->1920 +// Also remove the sleep_us(30), not necessary for this keyboard. +// In usb_descriptor.c, set .PollingIntervalMS = 0x01 +#define ROW_SHIFTER ((uint8_t)1) +inline static matrix_row_t optimized_col_reader(void) { //MATRIX_COL_PINS { B6, B2, B3, B1, F7, F6, F5, F4 } return (PINB & (1 << 6) ? 0 : (ROW_SHIFTER << 0)) | (PINB & (1 << 2) ? 0 : (ROW_SHIFTER << 1)) | @@ -351,26 +61,3 @@ static matrix_row_t optimized_col_reader(void) { } -static void select_row(uint8_t row) -{ - uint8_t pin = row_pins[row]; - _SFR_IO8((pin >> 4) + 1) |= _BV(pin & 0xF); // OUT - _SFR_IO8((pin >> 4) + 2) &= ~_BV(pin & 0xF); // LOW -} - -static void unselect_row(uint8_t row) -{ - uint8_t pin = row_pins[row]; - _SFR_IO8((pin >> 4) + 1) &= ~_BV(pin & 0xF); // IN - _SFR_IO8((pin >> 4) + 2) |= _BV(pin & 0xF); // HI -} - -static void unselect_rows(void) -{ - for(uint8_t x = 0; x < ROWS_PER_HAND; x++) { - uint8_t pin = row_pins[x]; - _SFR_IO8((pin >> 4) + 1) &= ~_BV(pin & 0xF); // IN - _SFR_IO8((pin >> 4) + 2) |= _BV(pin & 0xF); // HI - } -} - diff --git a/keyboards/handwired/xealous/rules.mk b/keyboards/handwired/xealous/rules.mk index 7d07c9aa5ff..ef3357982ea 100644 --- a/keyboards/handwired/xealous/rules.mk +++ b/keyboards/handwired/xealous/rules.mk @@ -1,5 +1,4 @@ -#SRC += matrix_scanrate.c matrix.c -SRC += debounce.c +SRC += matrix_scanrate.c matrix.c # MCU name MCU = atmega32u4 @@ -67,8 +66,7 @@ SUBPROJECT_rev1 = yes # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend -CUSTOM_MATRIX = no -DEBOUNCE_TYPE = custom +DEBOUNCE_TYPE = eager_pk LAYOUTS = split60 From 4c1760883e2e0ed710348f02bc791786ed0c1b04 Mon Sep 17 00:00:00 2001 From: James Churchill Date: Sat, 6 Apr 2019 02:20:43 +1000 Subject: [PATCH 032/171] Update ps2avrgb template to use standard matrix/i2c code (#4957) * Update ps2avrgb template to use standard matrix/i2c code * Default to an 8x11 matrix in the ps2avrgb template --- quantum/template/avr/template.c | 32 +++++--- quantum/template/ps2avrgb/config.h | 13 ++-- quantum/template/ps2avrgb/i2c.c | 106 ------------------------- quantum/template/ps2avrgb/i2c.h | 27 ------- quantum/template/ps2avrgb/matrix.c | 112 --------------------------- quantum/template/ps2avrgb/rules.mk | 4 +- quantum/template/ps2avrgb/template.c | 77 ++++++++++++++++-- 7 files changed, 100 insertions(+), 271 deletions(-) delete mode 100644 quantum/template/ps2avrgb/i2c.c delete mode 100644 quantum/template/ps2avrgb/i2c.h delete mode 100644 quantum/template/ps2avrgb/matrix.c diff --git a/quantum/template/avr/template.c b/quantum/template/avr/template.c index 1e4ce26cd16..86dc69abce7 100644 --- a/quantum/template/avr/template.c +++ b/quantum/template/avr/template.c @@ -15,29 +15,37 @@ */ #include "%KEYBOARD%.h" -void matrix_init_kb(void) { - // put your keyboard start-up code here - // runs once when the firmware starts up +// Optional override functions below. +// You can leave any or all of these undefined. +// These are only required if you want to perform custom actions. - matrix_init_user(); +/* + +void matrix_init_kb(void) { + // put your keyboard start-up code here + // runs once when the firmware starts up + + matrix_init_user(); } void matrix_scan_kb(void) { - // put your looping keyboard code here - // runs every cycle (a lot) + // put your looping keyboard code here + // runs every cycle (a lot) - matrix_scan_user(); + matrix_scan_user(); } bool process_record_kb(uint16_t keycode, keyrecord_t *record) { - // put your per-action keyboard code here - // runs for every action, just before processing by the firmware + // put your per-action keyboard code here + // runs for every action, just before processing by the firmware - return process_record_user(keycode, record); + return process_record_user(keycode, record); } void led_set_kb(uint8_t usb_led) { - // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here + // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here - led_set_user(usb_led); + led_set_user(usb_led); } + +*/ diff --git a/quantum/template/ps2avrgb/config.h b/quantum/template/ps2avrgb/config.h index 01cdf932ede..8d9a993cf1f 100644 --- a/quantum/template/ps2avrgb/config.h +++ b/quantum/template/ps2avrgb/config.h @@ -21,17 +21,20 @@ along with this program. If not, see . #define VENDOR_ID 0x20A0 #define PRODUCT_ID 0x422D +#define DEVICE_VER 0x0001 #define MANUFACTURER You #define PRODUCT %KEYBOARD% +#define DESCRIPTION A custom keyboard #define RGBLED_NUM 16 -#define MATRIX_ROWS 2 -#define MATRIX_COLS 3 +#define MATRIX_ROWS 8 +#define MATRIX_COLS 11 -#define MATRIX_ROW_PINS { D0, D5 } -#define MATRIX_COL_PINS { F1, F0, B0 } -#define UNUSED_PINS +#define MATRIX_ROW_PINS { B0, B1, B2, B3, B4, B5, B6, B7 } +#define MATRIX_COL_PINS { A0, A1, A2, A3, A4, A5, A6, A7, C7, C6, C5 } +// #define MATRIX_COL_PINS { A0, A1, A2, A3, A4, A5, A6, A7, C7, C6, C5, C4, C3, C2, C1, C0, D7 } +#define UNUSED_PINS {} #define DIODE_DIRECTION COL2ROW #define DEBOUNCING_DELAY 5 diff --git a/quantum/template/ps2avrgb/i2c.c b/quantum/template/ps2avrgb/i2c.c deleted file mode 100644 index e8c4455ad1b..00000000000 --- a/quantum/template/ps2avrgb/i2c.c +++ /dev/null @@ -1,106 +0,0 @@ -/* -Copyright 2016 Luiz Ribeiro - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see . -*/ - -// Please do not modify this file - -#include -#include - -#include "i2c.h" - -void i2c_set_bitrate(uint16_t bitrate_khz) { - uint8_t bitrate_div = ((F_CPU / 1000l) / bitrate_khz); - if (bitrate_div >= 16) { - bitrate_div = (bitrate_div - 16) / 2; - } - TWBR = bitrate_div; -} - -void i2c_init(void) { - // set pull-up resistors on I2C bus pins - PORTC |= 0b11; - - i2c_set_bitrate(400); - - // enable TWI (two-wire interface) - TWCR |= (1 << TWEN); - - // enable TWI interrupt and slave address ACK - TWCR |= (1 << TWIE); - TWCR |= (1 << TWEA); -} - -uint8_t i2c_start(uint8_t address) { - // reset TWI control register - TWCR = 0; - - // begin transmission and wait for it to end - TWCR = (1< - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see . -*/ - -// Please do not modify this file - -#ifndef __I2C_H__ -#define __I2C_H__ - -void i2c_init(void); -void i2c_set_bitrate(uint16_t bitrate_khz); -uint8_t i2c_send(uint8_t address, uint8_t *data, uint16_t length); - -#endif diff --git a/quantum/template/ps2avrgb/matrix.c b/quantum/template/ps2avrgb/matrix.c deleted file mode 100644 index 245813dfd2d..00000000000 --- a/quantum/template/ps2avrgb/matrix.c +++ /dev/null @@ -1,112 +0,0 @@ -/* -Copyright 2017 Luiz Ribeiro - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see . -*/ - -#include -#include - -#include "matrix.h" - -#ifndef DEBOUNCE -# define DEBOUNCE 5 -#endif - -static uint8_t debouncing = DEBOUNCE; - -static matrix_row_t matrix[MATRIX_ROWS]; -static matrix_row_t matrix_debouncing[MATRIX_ROWS]; - -void matrix_set_row_status(uint8_t row); -uint8_t bit_reverse(uint8_t x); - -void matrix_init(void) { - // all outputs for rows high - DDRB = 0xFF; - PORTB = 0xFF; - // all inputs for columns - DDRA = 0x00; - DDRC &= ~(0x111111<<2); - DDRD &= ~(1< 7 - (~PINA) & 0xFF - ) | ( - // cols 8..13, PORTC 7 -> 0 - bit_reverse((~PINC) & 0xFF) << 8 - ) | ( - // col 14, PORTD 7 - ((~PIND) & (1 << PIND7)) << 7 - ); - - if (matrix_debouncing[row] != cols) { - matrix_debouncing[row] = cols; - debouncing = DEBOUNCE; - } - } - - if (debouncing) { - if (--debouncing) { - _delay_ms(1); - } else { - for (uint8_t i = 0; i < MATRIX_ROWS; i++) { - matrix[i] = matrix_debouncing[i]; - } - } - } - - matrix_scan_quantum(); - - return 1; -} - -// declarations -void matrix_set_row_status(uint8_t row) { - DDRB = (1 << row); - PORTB = ~(1 << row); -} - -uint8_t bit_reverse(uint8_t x) { - x = ((x >> 1) & 0x55) | ((x << 1) & 0xaa); - x = ((x >> 2) & 0x33) | ((x << 2) & 0xcc); - x = ((x >> 4) & 0x0f) | ((x << 4) & 0xf0); - return x; -} - -inline matrix_row_t matrix_get_row(uint8_t row) { - return matrix[row]; -} - -void matrix_print(void) { -} diff --git a/quantum/template/ps2avrgb/rules.mk b/quantum/template/ps2avrgb/rules.mk index bcd7dff9991..191a1384463 100644 --- a/quantum/template/ps2avrgb/rules.mk +++ b/quantum/template/ps2avrgb/rules.mk @@ -42,9 +42,7 @@ RGBLIGHT_CUSTOM_DRIVER = yes OPT_DEFS = -DDEBUG_LEVEL=0 -# custom matrix setup -CUSTOM_MATRIX = yes -SRC = matrix.c i2c.c +SRC += i2c_master.c # programming options PROGRAM_CMD = ./util/atmega32a_program.py $(TARGET).hex diff --git a/quantum/template/ps2avrgb/template.c b/quantum/template/ps2avrgb/template.c index 08156c562c8..3f920de48c5 100644 --- a/quantum/template/ps2avrgb/template.c +++ b/quantum/template/ps2avrgb/template.c @@ -13,13 +13,78 @@ * You should have received a copy of the GNU General Public License * along with this program. If not, see . */ + #include "%KEYBOARD%.h" -#include -#include "action_layer.h" -#include "i2c.h" -#include "quantum.h" +#ifdef RGBLIGHT_ENABLE -__attribute__ ((weak)) -void matrix_scan_user(void) { +#include +#include "i2c_master.h" +#include "rgblight.h" + +extern rgblight_config_t rgblight_config; + +void matrix_init_kb(void) { + i2c_init(); + // call user level keymaps, if any + matrix_init_user(); } + +// custom RGB driver +void rgblight_set(void) { + if (!rgblight_config.enable) { + memset(led, 0, 3 * RGBLED_NUM); + } + + i2c_transmit(0xb0, (uint8_t*)led, 3 * RGBLED_NUM, 100); +} + +bool rgb_init = false; + +void matrix_scan_kb(void) { + // if LEDs were previously on before poweroff, turn them back on + if (rgb_init == false && rgblight_config.enable) { + i2c_transmit(0xb0, (uint8_t*)led, 3 * RGBLED_NUM, 100); + rgb_init = true; + } + + rgblight_task(); + matrix_scan_user(); +} + +#endif + +// Optional override functions below. +// You can leave any or all of these undefined. +// These are only required if you want to perform custom actions. + +/* + +void matrix_init_kb(void) { + // put your keyboard start-up code here + // runs once when the firmware starts up + + matrix_init_user(); +} + +void matrix_scan_kb(void) { + // put your looping keyboard code here + // runs every cycle (a lot) + + matrix_scan_user(); +} + +bool process_record_kb(uint16_t keycode, keyrecord_t *record) { + // put your per-action keyboard code here + // runs for every action, just before processing by the firmware + + return process_record_user(keycode, record); +} + +void led_set_kb(uint8_t usb_led) { + // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here + + led_set_user(usb_led); +} + +*/ From 5701b75e3c10728d424ec058d26ef2e354aba0c0 Mon Sep 17 00:00:00 2001 From: Drashna Jaelre Date: Fri, 5 Apr 2019 12:47:25 -0700 Subject: [PATCH 033/171] Custom Tapping Term per key (#5009) * Add customizable tapping terms * Add Documentation * Fix function * Fixes * It's not a pointer * Add debugging output * Update documentation to be at least vaguely accurate * Use `get_tapping_term(tapping_key.event)` instead `e` doesn't include column and row information, properly. It registers as 255, regardless of the actual keypress. However `tapping_key.event` actually gives the correct column and row information. It appears be the correct structure to use. In fact, it looks like the issue is that `e` is actually the "TICK" structure, as defined in keyboard.h * Use variable tapping term value rather than define * Silly drashna - tapping_key.event, not event * add get_event_keycode() function * Fix typo Co-Authored-By: drashna * Remove post_process_record_quantum since it's the wrong PR * Update quantum/quantum.c Co-Authored-By: drashna * Better handle ifdef statement for permissive hold Since we can't be sure that tapping term is actually 500 * Update quantum.c comments based on feedback * Clean up get_tapping_term function Clean up function so that users don't need to call the event function, and instead only check the keycode * Add ability to run functionality on and off * Make ifdef's more compact --- docs/config_options.md | 2 ++ docs/custom_quantum_functions.md | 29 +++++++++++++++++++++++++++++ quantum/quantum.c | 32 ++++++++++++++++++++++---------- quantum/quantum.h | 2 ++ tmk_core/common/action_tapping.c | 20 +++++++++++++++++--- tmk_core/common/action_tapping.h | 2 ++ 6 files changed, 74 insertions(+), 13 deletions(-) diff --git a/docs/config_options.md b/docs/config_options.md index ad42e978020..c5131a84145 100644 --- a/docs/config_options.md +++ b/docs/config_options.md @@ -126,6 +126,8 @@ If you define these options you will enable the associated feature, which may in * `#define TAPPING_TERM 200` * how long before a tap becomes a hold, if set above 500, a key tapped during the tapping term will turn it into a hold too +* `#define TAPPING_TERM_PER_KEY` + * enables handling for per key `TAPPING_TERM` settings * `#define RETRO_TAPPING` * tap anyway, even after TAPPING_TERM, if there was no other key interruption between press and release * See [Retro Tapping](feature_advanced_keycodes.md#retro-tapping) for details diff --git a/docs/custom_quantum_functions.md b/docs/custom_quantum_functions.md index 418faf34946..6287b953090 100644 --- a/docs/custom_quantum_functions.md +++ b/docs/custom_quantum_functions.md @@ -323,6 +323,7 @@ uint32_t layer_state_set_user(uint32_t state) { * Keyboard/Revision: `uint32_t layer_state_set_kb(uint32_t state)` * Keymap: `uint32_t layer_state_set_user(uint32_t state)` + The `state` is the bitmask of the active layers, as explained in the [Keymap Overview](keymap.md#keymap-layer-status) @@ -460,3 +461,31 @@ And you're done. The RGB layer indication will only work if you want it to. And * Keymap: `void eeconfig_init_user(void)`, `uint32_t eeconfig_read_user(void)` and `void eeconfig_update_user(uint32_t val)` The `val` is the value of the data that you want to write to EEPROM. And the `eeconfig_read_*` function return a 32 bit (DWORD) value from the EEPROM. + +# Custom Tapping Term + +By default, the tapping term is defined globally, and is not configurable by key. For most users, this is perfectly fine. But in come cases, dual function keys would be greatly improved by different timeouts than `LT` keys, or because some keys may be easier to hold than others. Instead of using custom key codes for each, this allows for per key configurable `TAPPING_TERM`. + +To enable this functionality, you need to add `#define TAPPING_TERM_PER_KEY` to your `config.h`, first. + + +## Example `get_tapping_term` Implementation + +To change the `TAPPING TERM` based on the keycode, you'd want to add something like the following to your `keymap.c` file: + +```c +uint16_t get_tapping_term(uint16_t keycode) { + switch (keycode) { + case SFT_T(KC_SPC): + return TAPPING_TERM + 1250; + case LT(1, KC_GRV): + return 130; + default: + return TAPPING_TERM; + } +} +``` + +### `get_tapping_term` Function Documentation + +Unlike many of the other functions here, there isn't a need (or even reason) to have a quantum or keyboard level function. Only a user level function is useful here, so no need to mark it as such. diff --git a/quantum/quantum.c b/quantum/quantum.c index 8c928441c5a..48c338fc85c 100644 --- a/quantum/quantum.c +++ b/quantum/quantum.c @@ -225,27 +225,39 @@ static uint16_t scs_timer[2] = {0, 0}; */ static bool grave_esc_was_shifted = false; -bool process_record_quantum(keyrecord_t *record) { +/* Convert record into usable keycode via the contained event. */ +uint16_t get_record_keycode(keyrecord_t *record) { + return get_event_keycode(record->event); +} - /* This gets the keycode from the key pressed */ - keypos_t key = record->event.key; - uint16_t keycode; + +/* Convert event into usable keycode. Checks the layer cache to ensure that it + * retains the correct keycode after a layer change, if the key is still pressed. + */ +uint16_t get_event_keycode(keyevent_t event) { #if !defined(NO_ACTION_LAYER) && !defined(STRICT_LAYER_RELEASE) /* TODO: Use store_or_get_action() or a similar function. */ if (!disable_action_cache) { uint8_t layer; - if (record->event.pressed) { - layer = layer_switch_get_layer(key); - update_source_layers_cache(key, layer); + if (event.pressed) { + layer = layer_switch_get_layer(event.key); + update_source_layers_cache(event.key, layer); } else { - layer = read_source_layers_cache(key); + layer = read_source_layers_cache(event.key); } - keycode = keymap_key_to_keycode(layer, key); + return keymap_key_to_keycode(layer, event.key); } else #endif - keycode = keymap_key_to_keycode(layer_switch_get_layer(key), key); + return keymap_key_to_keycode(layer_switch_get_layer(event.key), event.key); +} + +/* Main keycode processing function. Hands off handling to other functions, + * then processes internal Quantum keycodes, then processes ACTIONs. + */ +bool process_record_quantum(keyrecord_t *record) { + uint16_t keycode = get_record_keycode(record); // This is how you use actions here // if (keycode == KC_LEAD) { diff --git a/quantum/quantum.h b/quantum/quantum.h index c12ac9ab8af..d0b2bedb1b1 100644 --- a/quantum/quantum.h +++ b/quantum/quantum.h @@ -224,6 +224,8 @@ void matrix_init_kb(void); void matrix_scan_kb(void); void matrix_init_user(void); void matrix_scan_user(void); +uint16_t get_record_keycode(keyrecord_t *record); +uint16_t get_event_keycode(keyevent_t event); bool process_action_kb(keyrecord_t *record); bool process_record_kb(uint16_t keycode, keyrecord_t *record); bool process_record_user(uint16_t keycode, keyrecord_t *record); diff --git a/tmk_core/common/action_tapping.c b/tmk_core/common/action_tapping.c index 8adf013e16c..3b67ed152f7 100644 --- a/tmk_core/common/action_tapping.c +++ b/tmk_core/common/action_tapping.c @@ -18,8 +18,17 @@ #define IS_TAPPING_PRESSED() (IS_TAPPING() && tapping_key.event.pressed) #define IS_TAPPING_RELEASED() (IS_TAPPING() && !tapping_key.event.pressed) #define IS_TAPPING_KEY(k) (IS_TAPPING() && KEYEQ(tapping_key.event.key, (k))) -#define WITHIN_TAPPING_TERM(e) (TIMER_DIFF_16(e.time, tapping_key.event.time) < TAPPING_TERM) +__attribute__ ((weak)) +uint16_t get_tapping_term(uint16_t keycode) { + return TAPPING_TERM; +} + +#ifdef TAPPING_TERM_PER_KEY +#define WITHIN_TAPPING_TERM(e) (TIMER_DIFF_16(e.time, tapping_key.event.time) < get_tapping_term(get_event_keycode(tapping_key.event))) +#else +#define WITHIN_TAPPING_TERM(e) (TIMER_DIFF_16(e.time, tapping_key.event.time) < TAPPING_TERM) +#endif static keyrecord_t tapping_key = {}; static keyrecord_t waiting_buffer[WAITING_BUFFER_SIZE] = {}; @@ -100,12 +109,17 @@ bool process_tapping(keyrecord_t *keyp) // enqueue return false; } -#if TAPPING_TERM >= 500 || defined PERMISSIVE_HOLD /* Process a key typed within TAPPING_TERM * This can register the key before settlement of tapping, * useful for long TAPPING_TERM but may prevent fast typing. */ - else if (IS_RELEASED(event) && waiting_buffer_typed(event)) { +#if defined(TAPPING_TERM_PER_KEY) || (!defined(PER_KEY_TAPPING_TERM) && TAPPING_TERM >= 500) || defined(PERMISSIVE_HOLD) +#ifdef TAPPING_TERM_PER_KEY + else if ( ( get_tapping_term(get_event_keycode(tapping_key.event)) >= 500) && IS_RELEASED(event) && waiting_buffer_typed(event)) +#else + else if ( IS_RELEASED(event) && waiting_buffer_typed(event)) +#endif + { debug("Tapping: End. No tap. Interfered by typing key\n"); process_record(&tapping_key); tapping_key = (keyrecord_t){}; diff --git a/tmk_core/common/action_tapping.h b/tmk_core/common/action_tapping.h index 2f143ae8b82..1db43a442e3 100644 --- a/tmk_core/common/action_tapping.h +++ b/tmk_core/common/action_tapping.h @@ -35,6 +35,8 @@ along with this program. If not, see . #ifndef NO_ACTION_TAPPING +uint16_t get_event_keycode(keyevent_t event); +uint16_t get_tapping_term(uint16_t keycode); void action_tapping_process(keyrecord_t record); #endif From ced2bbdac8018b08f229460b289ff5a7fce5dd43 Mon Sep 17 00:00:00 2001 From: Bernard Date: Sat, 6 Apr 2019 03:53:07 +0800 Subject: [PATCH 034/171] Add a new keyboard: NQG (#5558) * Add new keyboard: NQG * Delete .gitignore .gitignore removed Originally used to ignore .DS_Store files from being committed. * Changed Maintainer information Maintainer link now points to a github account. --- keyboards/emptystring/NQG/NQG.c | 1 + keyboards/emptystring/NQG/NQG.h | 15 +++++ keyboards/emptystring/NQG/config.h | 42 ++++++++++++ .../emptystring/NQG/keymaps/default/keymap.c | 61 ++++++++++++++++++ .../emptystring/NQG/keymaps/default/rules.mk | 1 + keyboards/emptystring/NQG/readme.md | 15 +++++ keyboards/emptystring/NQG/rules.mk | 64 +++++++++++++++++++ 7 files changed, 199 insertions(+) create mode 100644 keyboards/emptystring/NQG/NQG.c create mode 100644 keyboards/emptystring/NQG/NQG.h create mode 100644 keyboards/emptystring/NQG/config.h create mode 100644 keyboards/emptystring/NQG/keymaps/default/keymap.c create mode 100644 keyboards/emptystring/NQG/keymaps/default/rules.mk create mode 100644 keyboards/emptystring/NQG/readme.md create mode 100644 keyboards/emptystring/NQG/rules.mk diff --git a/keyboards/emptystring/NQG/NQG.c b/keyboards/emptystring/NQG/NQG.c new file mode 100644 index 00000000000..eedf25e8815 --- /dev/null +++ b/keyboards/emptystring/NQG/NQG.c @@ -0,0 +1 @@ +#include "NQG.h" diff --git a/keyboards/emptystring/NQG/NQG.h b/keyboards/emptystring/NQG/NQG.h new file mode 100644 index 00000000000..943ea6ab167 --- /dev/null +++ b/keyboards/emptystring/NQG/NQG.h @@ -0,0 +1,15 @@ +#pragma once + +#include "quantum.h" + +#define LAYOUT( \ + L00, L01, L02, L03, L04, L05, L06, L07, L08, L09, \ + L10, L11, L12, L13, L14, L15, L16, L17, L18, L19, \ + L20, L21, L22, L23, L24, L25, L26, L27, L28, L29, \ + L30, L32, L33, L34, L35, L36, L37 \ + ) { \ + {L00, L01, L02, L03, L04, L05, L06, L07, L08, L09}, \ + {L10, L11, L12, L13, L14, L15, L16, L17, L18, L19}, \ + {L20, L21, L22, L23, L24, L25, L26, L27, L28, L29}, \ + {L30, KC_NO, L32, L33, L34, L35, L36, L37, KC_NO, KC_NO} \ + } diff --git a/keyboards/emptystring/NQG/config.h b/keyboards/emptystring/NQG/config.h new file mode 100644 index 00000000000..3f52ba3ea68 --- /dev/null +++ b/keyboards/emptystring/NQG/config.h @@ -0,0 +1,42 @@ +/* +Copyright 2019 Bernard Shih (twitter: @SA_EndlessGame) + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#pragma once + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0x0076 +#define PRODUCT_ID 0x0037 +#define DEVICE_VER 0x0100 +#define MANUFACTURER emptystring +#define PRODUCT NQG +#define DESCRIPTION 30% ortholinear keyboard + +/* key matrix size */ +#define MATRIX_ROWS 4 +#define MATRIX_COLS 10 + +/* key matrix pins */ +#define MATRIX_ROW_PINS {B6, B2, B3, B1} +#define MATRIX_COL_PINS {F7, F6, B5, B4, E6, D7, C6, D4, D0, D1} + + +/* COL2ROW or ROW2COL */ +#define DIODE_DIRECTION COL2ROW + +#define TAPPING_TERM 200 diff --git a/keyboards/emptystring/NQG/keymaps/default/keymap.c b/keyboards/emptystring/NQG/keymaps/default/keymap.c new file mode 100644 index 00000000000..cd465519bf6 --- /dev/null +++ b/keyboards/emptystring/NQG/keymaps/default/keymap.c @@ -0,0 +1,61 @@ +#include QMK_KEYBOARD_H + +#define _BASE 0 +#define _LOWER 1 +#define _RAISE 2 + +enum tapdances{ + TD_SCCL = 0, + TD_ENSL, + TD_N0BS, + TD_RPPI, +}; + +#define KC_SCCL TD(TD_SCCL) +#define KC_ENSL TD(TD_ENSL) +#define KC_N0BS TD(TD_N0BS) +#define KC_RPPI TD(TD_RPPI) + +#define KC_BSCT LCTL_T(KC_BSPC) +#define KC_ALEN LALT(KC_ENT) +#define KC_CTEN LCTL(KC_ENT) +#define KC_STAB LSFT_T(KC_TAB) +#define KC_WLNG LALT(KC_LSFT) +#define KC_LOCK LGUI(KC_L) +#define KC_ULCK LCTL(LALT(KC_DEL)) +#define KC_DSTP LGUI(KC_D) +#define KC_ESLO LT(_LOWER, KC_ESC) + + +qk_tap_dance_action_t tap_dance_actions[] = { + [TD_SCCL] = ACTION_TAP_DANCE_DOUBLE(KC_SCLN, KC_QUOT), + [TD_ENSL] = ACTION_TAP_DANCE_DOUBLE(KC_SLSH, KC_ENT), + [TD_N0BS] = ACTION_TAP_DANCE_DOUBLE(KC_0, KC_BSLS), + [TD_RPPI] = ACTION_TAP_DANCE_DOUBLE(KC_RPRN, KC_PIPE), +}; + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + + [_BASE] = LAYOUT( + KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, \ + KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCCL, \ + KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_ENSL,\ + KC_STAB, KC_ESLO, KC_BSCT, KC_BSCT, KC_SPC, KC_SPC, MO(_RAISE) + ), + + [_LOWER] = LAYOUT( + KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPPI, \ + _______, _______, KC_DSTP, _______, KC_WLNG, _______, KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, \ + _______, _______, _______, _______, _______, _______, KC_INS, KC_DEL, KC_HOME, KC_END,\ + KC_CTEN, _______, KC_BSCT, KC_BSCT, KC_SPC, KC_SPC, KC_ULCK + ), + + [_RAISE] = LAYOUT( + KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_N0BS, \ + _______, _______, _______, _______, _______, _______, KC_MINS, KC_EQL, KC_LBRC, KC_RBRC, \ + _______, _______, _______, _______, _______, _______, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT,\ + KC_ALEN, KC_LOCK, KC_BSCT, KC_BSCT, KC_SPC, KC_SPC, _______ + ), + + +}; diff --git a/keyboards/emptystring/NQG/keymaps/default/rules.mk b/keyboards/emptystring/NQG/keymaps/default/rules.mk new file mode 100644 index 00000000000..e5ddcae8d92 --- /dev/null +++ b/keyboards/emptystring/NQG/keymaps/default/rules.mk @@ -0,0 +1 @@ +TAP_DANCE_ENABLE = yes diff --git a/keyboards/emptystring/NQG/readme.md b/keyboards/emptystring/NQG/readme.md new file mode 100644 index 00000000000..a8c89986342 --- /dev/null +++ b/keyboards/emptystring/NQG/readme.md @@ -0,0 +1,15 @@ +# NQG: Not Quite Gherkin + +![NQG](https://github.com/culturalsnow/NQG/blob/master/images/NQGLayout.jpg) + +NQG (Not Quite Gherkin) is a 30% ortholinear keyboard with a macro key and dedicated row for thumb keys, made by emptystring studio. + +Keyboard Maintainer: [Culturalsnow](http://github.com/culturalsnow) +Hardware Supported: NQG PCB, Pro Micro +Hardware Availability: Kits are available from [SA_EndlessGame](http://twitter.com/SA_EndlessGame) + +Make example for this keyboard (after setting up your build environment): + + make emptystring/NQG:default + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/emptystring/NQG/rules.mk b/keyboards/emptystring/NQG/rules.mk new file mode 100644 index 00000000000..9a46bb85440 --- /dev/null +++ b/keyboards/emptystring/NQG/rules.mk @@ -0,0 +1,64 @@ +# MCU name + +MCU = atmega32u4 + +# Processor frequency. +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to +# calculate timings. Do NOT tack on a 'UL' at the end, this will be done +# automatically to create a 32-bit value in your source code. +# +# This will be an integer division of F_USB below, as it is sourced by +# F_USB after it has run through any CPU prescalers. Note that this value +# does not *change* the processor frequency - it should merely be updated to +# reflect the processor speed set externally so that the code can use accurate +# software delays. +F_CPU = 16000000 + +# +# LUFA specific +# +# Target architecture (see library "Board Types" documentation). +ARCH = AVR8 + +# Input clock frequency. +# This will define a symbol, F_USB, in all source code files equal to the +# input clock frequency (before any prescaling is performed) in Hz. This value may +# differ from F_CPU if prescaling is used on the latter, and is required as the +# raw input clock is fed directly to the PLL sections of the AVR for high speed +# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' +# at the end, this will be done automatically to create a 32-bit value in your +# source code. +# +# If no clock division is performed on the input clock inside the AVR (via the +# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. +F_USB = $(F_CPU) + +# Interrupt driven control endpoint task(+60) +OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT + + +# Boot Section Size in *bytes* +# Teensy halfKay 512 +# Teensy++ halfKay 1024 +# Atmel DFU loader 4096 +# LUFA bootloader 4096 +# USBaspLoader 2048 +OPT_DEFS += -DBOOTLOADER_SIZE=4096 + +# Build Options +# change to "no" to disable the options, or define them in the Makefile in +# the appropriate keymap folder that will get included automatically +# +BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = no # Mouse keys(+4700) +EXTRAKEY_ENABLE = no # Audio control and System control(+450) +CONSOLE_ENABLE = no # Console for debug(+400) +COMMAND_ENABLE = no # Commands for debug and configuration +NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +MIDI_ENABLE = no # MIDI controls +AUDIO_ENABLE = no # Audio output on port C6 +UNICODE_ENABLE = no # Unicode +BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID +RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. From a615a2ae93107c5f4ddcb447a562af1a721a00d9 Mon Sep 17 00:00:00 2001 From: Drashna Jaelre Date: Mon, 28 Jan 2019 00:00:42 -0800 Subject: [PATCH 035/171] Convert Orthodox to Split Common code --- keyboards/orthodox/config.h | 27 -- keyboards/orthodox/i2c.c | 162 ----------- keyboards/orthodox/i2c.h | 50 ---- keyboards/orthodox/matrix.c | 342 ------------------------ keyboards/orthodox/rev1/config.h | 7 +- keyboards/orthodox/rev3/config.h | 7 +- keyboards/orthodox/rev3_teensy/config.h | 7 +- keyboards/orthodox/rules.mk | 13 +- keyboards/orthodox/serial.c | 230 ---------------- keyboards/orthodox/serial.h | 27 -- keyboards/orthodox/split_util.c | 84 ------ keyboards/orthodox/split_util.h | 21 -- 12 files changed, 12 insertions(+), 965 deletions(-) delete mode 100644 keyboards/orthodox/config.h delete mode 100644 keyboards/orthodox/i2c.c delete mode 100644 keyboards/orthodox/i2c.h delete mode 100644 keyboards/orthodox/matrix.c delete mode 100644 keyboards/orthodox/serial.c delete mode 100644 keyboards/orthodox/serial.h delete mode 100644 keyboards/orthodox/split_util.c delete mode 100644 keyboards/orthodox/split_util.h diff --git a/keyboards/orthodox/config.h b/keyboards/orthodox/config.h deleted file mode 100644 index 821cd7e29f2..00000000000 --- a/keyboards/orthodox/config.h +++ /dev/null @@ -1,27 +0,0 @@ -/* -This is the c configuration file for the keyboard - -Copyright 2012 Jun Wako -Copyright 2017 Jack Humbert -Copyright 2017 Art Ortenburger - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see . -*/ - -#ifndef CONFIG_H -#define CONFIG_H - -#include "config_common.h" - -#endif diff --git a/keyboards/orthodox/i2c.c b/keyboards/orthodox/i2c.c deleted file mode 100644 index 084c890c405..00000000000 --- a/keyboards/orthodox/i2c.c +++ /dev/null @@ -1,162 +0,0 @@ -#include -#include -#include -#include -#include -#include -#include "i2c.h" - -#ifdef USE_I2C - -// Limits the amount of we wait for any one i2c transaction. -// Since were running SCL line 100kHz (=> 10μs/bit), and each transactions is -// 9 bits, a single transaction will take around 90μs to complete. -// -// (F_CPU/SCL_CLOCK) => # of μC cycles to transfer a bit -// poll loop takes at least 8 clock cycles to execute -#define I2C_LOOP_TIMEOUT (9+1)*(F_CPU/SCL_CLOCK)/8 - -#define BUFFER_POS_INC() (slave_buffer_pos = (slave_buffer_pos+1)%SLAVE_BUFFER_SIZE) - -volatile uint8_t i2c_slave_buffer[SLAVE_BUFFER_SIZE]; - -static volatile uint8_t slave_buffer_pos; -static volatile bool slave_has_register_set = false; - -// Wait for an i2c operation to finish -inline static -void i2c_delay(void) { - uint16_t lim = 0; - while(!(TWCR & (1<10. - // Check datasheets for more info. - TWBR = ((F_CPU/SCL_CLOCK)-16)/2; -} - -// Start a transaction with the given i2c slave address. The direction of the -// transfer is set with I2C_READ and I2C_WRITE. -// returns: 0 => success -// 1 => error -uint8_t i2c_master_start(uint8_t address) { - TWCR = (1< slave ACK -// 1 => slave NACK -uint8_t i2c_master_write(uint8_t data) { - TWDR = data; - TWCR = (1<= SLAVE_BUFFER_SIZE ) { - ack = 0; - slave_buffer_pos = 0; - } - slave_has_register_set = true; - } else { - i2c_slave_buffer[slave_buffer_pos] = TWDR; - BUFFER_POS_INC(); - } - break; - - case TW_ST_SLA_ACK: - case TW_ST_DATA_ACK: - // master has addressed this device as a slave transmitter and is - // requesting data. - TWDR = i2c_slave_buffer[slave_buffer_pos]; - BUFFER_POS_INC(); - break; - - case TW_BUS_ERROR: // something went wrong, reset twi state - TWCR = 0; - default: - break; - } - // Reset everything, so we are ready for the next TWI interrupt - TWCR |= (1< -#include "matrix.h" - -#ifndef F_CPU -#define F_CPU 16000000UL -#endif - -#define I2C_READ 1 -#define I2C_WRITE 0 - -#define I2C_ACK 1 -#define I2C_NACK 0 - -#define SLAVE_BUFFER_SIZE 0x10 - -// i2c SCL clock frequency -#define SCL_CLOCK 100000UL - -extern volatile uint8_t i2c_slave_buffer[SLAVE_BUFFER_SIZE]; - -void i2c_master_init(void); -uint8_t i2c_master_start(uint8_t address); -void i2c_master_stop(void); -uint8_t i2c_master_write(uint8_t data); -uint8_t i2c_master_read(int); -void i2c_reset_state(void); -void i2c_slave_init(uint8_t address); - - -static inline unsigned char i2c_start_read(unsigned char addr) { - return i2c_master_start((addr << 1) | I2C_READ); -} - -static inline unsigned char i2c_start_write(unsigned char addr) { - return i2c_master_start((addr << 1) | I2C_WRITE); -} - -// from SSD1306 scrips -extern unsigned char i2c_rep_start(unsigned char addr); -extern void i2c_start_wait(unsigned char addr); -extern unsigned char i2c_readAck(void); -extern unsigned char i2c_readNak(void); -extern unsigned char i2c_read(unsigned char ack); - -#define i2c_read(ack) (ack) ? i2c_readAck() : i2c_readNak(); - -#endif diff --git a/keyboards/orthodox/matrix.c b/keyboards/orthodox/matrix.c deleted file mode 100644 index 2ca5f4d87ab..00000000000 --- a/keyboards/orthodox/matrix.c +++ /dev/null @@ -1,342 +0,0 @@ -/* -Copyright 2012 Jun Wako - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see . -*/ - -/* - * scan matrix - */ -#include -#include -#ifdef USE_I2C -// provides memcpy for copying TWI slave buffer -// #include -#endif -#include -#include -#include -#include -#include "print.h" -#include "debug.h" -#include "util.h" -#include "matrix.h" -#include "split_util.h" -#include "pro_micro.h" -#include "config.h" - -#ifdef USE_I2C -# include "i2c.h" -#else // USE_SERIAL -# include "serial.h" -#endif - -#ifndef DEBOUNCE -# define DEBOUNCE 5 -#endif - -#define ERROR_DISCONNECT_COUNT 5 - -static uint8_t debouncing = DEBOUNCE; -static const int ROWS_PER_HAND = MATRIX_ROWS/2; -static uint8_t error_count = 0; - -static const uint8_t row_pins[MATRIX_ROWS] = MATRIX_ROW_PINS; -static const uint8_t col_pins[MATRIX_COLS] = MATRIX_COL_PINS; - -/* matrix state(1:on, 0:off) */ -static matrix_row_t matrix[MATRIX_ROWS]; -static matrix_row_t matrix_debouncing[MATRIX_ROWS]; - -static matrix_row_t read_cols(void); -static void init_cols(void); -static void unselect_rows(void); -static void select_row(uint8_t row); - - -__attribute__ ((weak)) -void matrix_init_kb(void) { - matrix_init_user(); -} - -__attribute__ ((weak)) -void matrix_scan_kb(void) { - matrix_scan_user(); -} - -__attribute__ ((weak)) -void matrix_init_user(void) { -} - -__attribute__ ((weak)) -void matrix_scan_user(void) { -} - -inline -uint8_t matrix_rows(void) -{ - return MATRIX_ROWS; -} - -inline -uint8_t matrix_cols(void) -{ - return MATRIX_COLS; -} - -void matrix_init(void) -{ - debug_enable = true; - debug_matrix = true; - debug_mouse = true; - // initialize row and col - unselect_rows(); - init_cols(); - - TX_RX_LED_INIT; - - // initialize matrix state: all keys off - for (uint8_t i=0; i < MATRIX_ROWS; i++) { - matrix[i] = 0; - matrix_debouncing[i] = 0; - } - - matrix_init_quantum(); -} - -uint8_t _matrix_scan(void) -{ - // Right hand is stored after the left in the matrix so, we need to offset it - int offset = isLeftHand ? 0 : (ROWS_PER_HAND); - - for (uint8_t i = 0; i < ROWS_PER_HAND; i++) { - select_row(i); - _delay_us(30); // without this wait read unstable value. - matrix_row_t cols = read_cols(); - if (matrix_debouncing[i+offset] != cols) { - matrix_debouncing[i+offset] = cols; - debouncing = DEBOUNCE; - } - unselect_rows(); - } - - if (debouncing) { - if (--debouncing) { - _delay_ms(1); - } else { - for (uint8_t i = 0; i < ROWS_PER_HAND; i++) { - matrix[i+offset] = matrix_debouncing[i+offset]; - } - } - } - - return 1; -} - -#ifdef USE_I2C - -// Get rows from other half over i2c -int i2c_transaction(void) { - int slaveOffset = (isLeftHand) ? (ROWS_PER_HAND) : 0; - - int err = i2c_master_start(SLAVE_I2C_ADDRESS + I2C_WRITE); - if (err) goto i2c_error; - - // start of matrix stored at 0x00 - err = i2c_master_write(0x00); - if (err) goto i2c_error; - - // Start read - err = i2c_master_start(SLAVE_I2C_ADDRESS + I2C_READ); - if (err) goto i2c_error; - - if (!err) { - /* - // read from TWI byte-by-byte into matrix_row_t memory space - size_t i; - for (i = 0; i < SLAVE_BUFFER_SIZE-1; ++i) { - *((uint8_t*)&matrix[slaveOffset]+i) = i2c_master_read(I2C_ACK); - } - // last byte to be read / end of chunk - *((uint8_t*)&matrix[slaveOffset]+i) = i2c_master_read(I2C_NACK); - */ - - // kludge for column #9: unpack bits for keys (2,9) and (3,9) from (1,7) and (1,8) - // i2c_master_read(I2C_ACK); - matrix[slaveOffset+0] = i2c_master_read(I2C_ACK); - // i2c_master_read(I2C_ACK); - matrix[slaveOffset+1] = (matrix_row_t)i2c_master_read(I2C_ACK)\ - | (matrix[slaveOffset+0]&0x40U)<<2; - // i2c_master_read(I2C_ACK); - matrix[slaveOffset+2] = (matrix_row_t)i2c_master_read(I2C_NACK)\ - | (matrix[slaveOffset+0]&0x80U)<<1; - // clear highest two bits on row 1, where the col9 bits were transported - matrix[slaveOffset+0] &= 0x3F; - - i2c_master_stop(); - } else { -i2c_error: // the cable is disconnected, or something else went wrong - i2c_reset_state(); - return err; - } - - return 0; -} - -#else // USE_SERIAL - -int serial_transaction(void) { - int slaveOffset = (isLeftHand) ? (ROWS_PER_HAND) : 0; - - if (serial_update_buffers()) { - return 1; - } - - for (int i = 0; i < ROWS_PER_HAND; ++i) { - matrix[slaveOffset+i] = serial_slave_buffer[i]; - } - return 0; -} -#endif - -uint8_t matrix_scan(void) -{ - int ret = _matrix_scan(); - - - -#ifdef USE_I2C - if( i2c_transaction() ) { -#else // USE_SERIAL - if( serial_transaction() ) { -#endif - // turn on the indicator led when halves are disconnected - TXLED1; - - error_count++; - - if (error_count > ERROR_DISCONNECT_COUNT) { - // reset other half if disconnected - int slaveOffset = (isLeftHand) ? (ROWS_PER_HAND) : 0; - for (int i = 0; i < ROWS_PER_HAND; ++i) { - matrix[slaveOffset+i] = 0; - } - } - } else { - // turn off the indicator led on no error - TXLED0; - error_count = 0; - } - matrix_scan_quantum(); - return ret; -} - -void matrix_slave_scan(void) { - _matrix_scan(); - - int offset = (isLeftHand) ? 0 : ROWS_PER_HAND; - -#ifdef USE_I2C - // SLAVE_BUFFER_SIZE is from i2c.h - // (MATRIX_ROWS/2*sizeof(matrix_row_t)) - // memcpy((void*)i2c_slave_buffer, (const void*)&matrix[offset], (ROWS_PER_HAND*sizeof(matrix_row_t))); - - // kludge for column #9: put bits for keys (2,9) and (3,9) into (1,7) and (1,8) - i2c_slave_buffer[0] = (uint8_t)(matrix[offset+0])\ - | (matrix[offset+1]&0x100U)>>2\ - | (matrix[offset+2]&0x100U)>>1; - i2c_slave_buffer[1] = (uint8_t)(matrix[offset+1]); - i2c_slave_buffer[2] = (uint8_t)(matrix[offset+2]); - // note: looks like a possible operator-precedence bug here, in last version? - /* - i2c_slave_buffer[1] = (uint8_t)matrix[offset+0]; - i2c_slave_buffer[2] = (uint8_t)(matrix[offset+1]>>8); - i2c_slave_buffer[3] = (uint8_t)(matrix[offset+1]>>8); - i2c_slave_buffer[4] = (uint8_t)(matrix[offset+2]>>8); - i2c_slave_buffer[5] = (uint8_t)matrix[offset+2]; - */ -#else // USE_SERIAL - for (int i = 0; i < ROWS_PER_HAND; ++i) { - serial_slave_buffer[i] = matrix[offset+i]; - } -#endif -} - -bool matrix_is_modified(void) -{ - if (debouncing) return false; - return true; -} - -inline -bool matrix_is_on(uint8_t row, uint8_t col) -{ - return (matrix[row] & ((matrix_row_t)1<> 4) + 1) &= ~_BV(col_pins[x] & 0xF); - _SFR_IO8((col_pins[x] >> 4) + 2) |= _BV(col_pins[x] & 0xF); - } -} - -static matrix_row_t read_cols(void) -{ - matrix_row_t result = 0; - for(int x = 0; x < MATRIX_COLS; x++) { - result |= (_SFR_IO8(col_pins[x] >> 4) & _BV(col_pins[x] & 0xF)) ? 0 : (1 << x); - } - return result; -} - -static void unselect_rows(void) -{ - for(int x = 0; x < ROWS_PER_HAND; x++) { - _SFR_IO8((row_pins[x] >> 4) + 1) &= ~_BV(row_pins[x] & 0xF); - _SFR_IO8((row_pins[x] >> 4) + 2) |= _BV(row_pins[x] & 0xF); - } -} - -static void select_row(uint8_t row) -{ - _SFR_IO8((row_pins[row] >> 4) + 1) |= _BV(row_pins[row] & 0xF); - _SFR_IO8((row_pins[row] >> 4) + 2) &= ~_BV(row_pins[row] & 0xF); -} diff --git a/keyboards/orthodox/rev1/config.h b/keyboards/orthodox/rev1/config.h index f7497c09c5c..198fff5aca2 100644 --- a/keyboards/orthodox/rev1/config.h +++ b/keyboards/orthodox/rev1/config.h @@ -19,8 +19,7 @@ You should have received a copy of the GNU General Public License along with this program. If not, see . */ -#ifndef REV1_CONFIG_H -#define REV1_CONFIG_H +#pragma once #include "config_common.h" @@ -49,6 +48,8 @@ along with this program. If not, see . /* COL2ROW or ROW2COL */ #define DIODE_DIRECTION COL2ROW +#define SOFT_SERIAL_PIN D0 + /* define if matrix has ghost */ //#define MATRIX_HAS_GHOST @@ -89,5 +90,3 @@ along with this program. If not, see . //#define NO_ACTION_ONESHOT //#define NO_ACTION_MACRO //#define NO_ACTION_FUNCTION - -#endif diff --git a/keyboards/orthodox/rev3/config.h b/keyboards/orthodox/rev3/config.h index d727ae674b4..53e5b15ae82 100644 --- a/keyboards/orthodox/rev3/config.h +++ b/keyboards/orthodox/rev3/config.h @@ -19,8 +19,7 @@ You should have received a copy of the GNU General Public License along with this program. If not, see . */ -#ifndef REV3_CONFIG_H -#define REV3_CONFIG_H +#pragma once #include "config_common.h" @@ -54,6 +53,8 @@ along with this program. If not, see . /* COL2ROW or ROW2COL */ #define DIODE_DIRECTION COL2ROW +#define SOFT_SERIAL_PIN D0 + /* define if matrix has ghost */ //#define MATRIX_HAS_GHOST @@ -95,5 +96,3 @@ along with this program. If not, see . //#define NO_ACTION_ONESHOT //#define NO_ACTION_MACRO //#define NO_ACTION_FUNCTION - -#endif diff --git a/keyboards/orthodox/rev3_teensy/config.h b/keyboards/orthodox/rev3_teensy/config.h index 591827fb973..54cbb823eca 100644 --- a/keyboards/orthodox/rev3_teensy/config.h +++ b/keyboards/orthodox/rev3_teensy/config.h @@ -19,8 +19,7 @@ You should have received a copy of the GNU General Public License along with this program. If not, see . */ -#ifndef REV3_TEENSY_CONFIG_H -#define REV3_TEENSY_CONFIG_H +#pragma once #include "config_common.h" @@ -46,6 +45,8 @@ along with this program. If not, see . /* COL2ROW or ROW2COL */ #define DIODE_DIRECTION COL2ROW +#define SOFT_SERIAL_PIN D0 + /* define if matrix has ghost */ //#define MATRIX_HAS_GHOST @@ -87,5 +88,3 @@ along with this program. If not, see . //#define NO_ACTION_ONESHOT //#define NO_ACTION_MACRO //#define NO_ACTION_FUNCTION - -#endif diff --git a/keyboards/orthodox/rules.mk b/keyboards/orthodox/rules.mk index 715f25c3a00..61878ea83c3 100644 --- a/keyboards/orthodox/rules.mk +++ b/keyboards/orthodox/rules.mk @@ -1,8 +1,3 @@ -SRC += matrix.c \ - i2c.c \ - split_util.c \ - serial.c - # MCU name MCU = atmega32u4 @@ -40,7 +35,7 @@ F_USB = $(F_CPU) # Bootloader # This definition is optional, and if your keyboard supports multiple bootloaders of -# different sizes, comment this out, and the correct address will be loaded +# different sizes, comment this out, and the correct address will be loaded # automatically (+60). See bootloader.mk for all options. # Interrupt driven control endpoint task(+60) @@ -61,12 +56,10 @@ MIDI_ENABLE = no # MIDI controls AUDIO_ENABLE = no # Audio output on port C6 UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID -RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. -SUBPROJECT_rev1 = yes -USE_I2C = yes +RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend -CUSTOM_MATRIX = yes +SPLIT_KEYBOARD = yes DEFAULT_FOLDER = orthodox/rev3 diff --git a/keyboards/orthodox/serial.c b/keyboards/orthodox/serial.c deleted file mode 100644 index fea57b65101..00000000000 --- a/keyboards/orthodox/serial.c +++ /dev/null @@ -1,230 +0,0 @@ -/* - * WARNING: be careful changing this code, it is very timing dependent - */ - -#ifndef F_CPU -#define F_CPU 16000000 -#endif - -#include -#include -#include -#include -#include "serial.h" - -#ifndef USE_I2C - -// Serial pulse period in microseconds. Its probably a bad idea to lower this -// value. -#define SERIAL_DELAY 24 - -matrix_row_t volatile serial_slave_buffer[SERIAL_SLAVE_BUFFER_LENGTH] = {0}; -matrix_row_t volatile serial_master_buffer[SERIAL_MASTER_BUFFER_LENGTH] = {0}; - -#define ROW_MASK (((matrix_row_t)0-1)>>(8*sizeof(matrix_row_t)-MATRIX_COLS)) - -#define SLAVE_DATA_CORRUPT (1<<0) -volatile uint8_t status = 0; - -inline static -void serial_delay(void) { - _delay_us(SERIAL_DELAY); -} - -inline static -void serial_output(void) { - SERIAL_PIN_DDR |= SERIAL_PIN_MASK; -} - -// make the serial pin an input with pull-up resistor -inline static -void serial_input(void) { - SERIAL_PIN_DDR &= ~SERIAL_PIN_MASK; - SERIAL_PIN_PORT |= SERIAL_PIN_MASK; -} - -inline static -matrix_row_t serial_read_pin(void) { - return !!(SERIAL_PIN_INPUT & SERIAL_PIN_MASK); -} - -inline static -void serial_low(void) { - SERIAL_PIN_PORT &= ~SERIAL_PIN_MASK; -} - -inline static -void serial_high(void) { - SERIAL_PIN_PORT |= SERIAL_PIN_MASK; -} - -void serial_master_init(void) { - serial_output(); - serial_high(); -} - -void serial_slave_init(void) { - serial_input(); - - // Enable INT0 - EIMSK |= _BV(INT0); - // Trigger on falling edge of INT0 - EICRA &= ~(_BV(ISC00) | _BV(ISC01)); -} - -// Used by the master to synchronize timing with the slave. -static -void sync_recv(void) { - serial_input(); - // This shouldn't hang if the slave disconnects because the - // serial line will float to high if the slave does disconnect. - while (!serial_read_pin()); - serial_delay(); -} - -// Used by the slave to send a synchronization signal to the master. -static -void sync_send(void) { - serial_output(); - - serial_low(); - serial_delay(); - - serial_high(); -} - -// Reads a byte from the serial line -static -matrix_row_t serial_read_byte(void) { - matrix_row_t byte = 0; - serial_input(); - for ( uint8_t i = 0; i < MATRIX_COLS; ++i) { - byte = (byte << 1) | serial_read_pin(); - serial_delay(); - _delay_us(1); - } - - return byte; -} - -// Sends a byte with MSB ordering -static -void serial_write_byte(matrix_row_t data) { - matrix_row_t b = MATRIX_COLS; - serial_output(); - while( b-- ) { - if(data & (1UL << b)) { - serial_high(); - } else { - serial_low(); - } - serial_delay(); - } -} - -// interrupt handle to be used by the slave device -ISR(SERIAL_PIN_INTERRUPT) { - sync_send(); - - matrix_row_t checksum = 0; - for (int i = 0; i < SERIAL_SLAVE_BUFFER_LENGTH; ++i) { - serial_write_byte(serial_slave_buffer[i]); - sync_send(); - checksum += ROW_MASK & serial_slave_buffer[i]; - } - serial_write_byte(checksum); - sync_send(); - - // wait for the sync to finish sending - serial_delay(); - - // read the middle of pulses - _delay_us(SERIAL_DELAY/2); - - matrix_row_t checksum_computed = 0; - for (int i = 0; i < SERIAL_MASTER_BUFFER_LENGTH; ++i) { - serial_master_buffer[i] = serial_read_byte(); - sync_send(); - checksum_computed += ROW_MASK & serial_master_buffer[i]; - } - matrix_row_t checksum_received = serial_read_byte(); - sync_send(); - - serial_input(); // end transaction - - if ( checksum_computed != checksum_received ) { - status |= SLAVE_DATA_CORRUPT; - } else { - status &= ~SLAVE_DATA_CORRUPT; - } -} - -inline -bool serial_slave_DATA_CORRUPT(void) { - return status & SLAVE_DATA_CORRUPT; -} - -// Copies the serial_slave_buffer to the master and sends the -// serial_master_buffer to the slave. -// -// Returns: -// 0 => no error -// 1 => slave did not respond -int serial_update_buffers(void) { - // this code is very time dependent, so we need to disable interrupts - cli(); - - // signal to the slave that we want to start a transaction - serial_output(); - serial_low(); - _delay_us(1); - - // wait for the slaves response - serial_input(); - serial_high(); - _delay_us(SERIAL_DELAY); - - // check if the slave is present - if (serial_read_pin()) { - // slave failed to pull the line low, assume not present - sei(); - return 1; - } - - // if the slave is present syncronize with it - sync_recv(); - - matrix_row_t checksum_computed = 0; - // receive data from the slave - for (int i = 0; i < SERIAL_SLAVE_BUFFER_LENGTH; ++i) { - serial_slave_buffer[i] = serial_read_byte(); - sync_recv(); - checksum_computed += ROW_MASK & serial_slave_buffer[i]; - } - matrix_row_t checksum_received = serial_read_byte(); - sync_recv(); - - if (checksum_computed != checksum_received) { - sei(); - return 1; - } - - matrix_row_t checksum = 0; - // send data to the slave - for (int i = 0; i < SERIAL_MASTER_BUFFER_LENGTH; ++i) { - serial_write_byte(serial_master_buffer[i]); - sync_recv(); - checksum += ROW_MASK & serial_master_buffer[i]; - } - serial_write_byte(checksum); - sync_recv(); - - // always, release the line when not in use - serial_output(); - serial_high(); - - sei(); - return 0; -} - -#endif diff --git a/keyboards/orthodox/serial.h b/keyboards/orthodox/serial.h deleted file mode 100644 index a46a98c9472..00000000000 --- a/keyboards/orthodox/serial.h +++ /dev/null @@ -1,27 +0,0 @@ -#ifndef MY_SERIAL_H -#define MY_SERIAL_H - -#include "config.h" -#include -#include "matrix.h" - -/* TODO: some defines for interrupt setup */ -#define SERIAL_PIN_DDR DDRD -#define SERIAL_PIN_PORT PORTD -#define SERIAL_PIN_INPUT PIND -#define SERIAL_PIN_MASK _BV(PD0) -#define SERIAL_PIN_INTERRUPT INT0_vect - -#define SERIAL_SLAVE_BUFFER_LENGTH MATRIX_ROWS/2 -#define SERIAL_MASTER_BUFFER_LENGTH 1 - -// Buffers for master - slave communication -extern volatile matrix_row_t serial_slave_buffer[SERIAL_SLAVE_BUFFER_LENGTH]; -extern volatile matrix_row_t serial_master_buffer[SERIAL_MASTER_BUFFER_LENGTH]; - -void serial_master_init(void); -void serial_slave_init(void); -int serial_update_buffers(void); -bool serial_slave_data_corrupt(void); - -#endif diff --git a/keyboards/orthodox/split_util.c b/keyboards/orthodox/split_util.c deleted file mode 100644 index 39639c3b4bd..00000000000 --- a/keyboards/orthodox/split_util.c +++ /dev/null @@ -1,84 +0,0 @@ -#include -#include -#include -#include -#include -#include -#include "split_util.h" -#include "matrix.h" -#include "keyboard.h" -#include "config.h" - -#ifdef USE_I2C -# include "i2c.h" -#else -# include "serial.h" -#endif - -volatile bool isLeftHand = true; - -static void setup_handedness(void) { - #ifdef EE_HANDS - isLeftHand = eeprom_read_byte(EECONFIG_HANDEDNESS); - #else - // I2C_MASTER_RIGHT is deprecated, use MASTER_RIGHT instead, since this works for both serial and i2c - #if defined(I2C_MASTER_RIGHT) || defined(MASTER_RIGHT) - isLeftHand = !has_usb(); - #else - isLeftHand = has_usb(); - #endif - #endif -} - -static void keyboard_master_setup(void) { -#ifdef USE_I2C - i2c_master_init(); -#ifdef SSD1306OLED - matrix_master_OLED_init (); -#endif -#else - serial_master_init(); -#endif -} - -static void keyboard_slave_setup(void) { -#ifdef USE_I2C - i2c_slave_init(SLAVE_I2C_ADDRESS); -#else - serial_slave_init(); -#endif -} - -bool has_usb(void) { - USBCON |= (1 << OTGPADE); //enables VBUS pad - _delay_us(5); - return (USBSTA & (1< -#include "eeconfig.h" - - -#define SLAVE_I2C_ADDRESS 0x32 - -extern volatile bool isLeftHand; - -// slave version of matix scan, defined in matrix.c -void matrix_slave_scan(void); - -void split_keyboard_setup(void); -bool has_usb(void); -void keyboard_slave_loop(void); - -void matrix_master_OLED_init (void); - -#endif From c9a2d9d1aa8bb5f257954ea0569f707c0ae758b0 Mon Sep 17 00:00:00 2001 From: Drashna Jaelre Date: Tue, 29 Jan 2019 09:09:10 -0800 Subject: [PATCH 036/171] Additional cleanup of orthodox files and keymaps --- keyboards/orthodox/keymaps/oscillope/config.h | 6 +----- keyboards/orthodox/keymaps/rfvizarra/config.h | 6 +----- keyboards/orthodox/keymaps/xyverz/config.h | 7 +------ keyboards/orthodox/orthodox.h | 9 +++------ keyboards/orthodox/rev1/rev1.h | 7 +------ keyboards/orthodox/rev3/rev3.h | 6 +----- keyboards/orthodox/rev3_teensy/rev3_teensy.h | 6 +----- 7 files changed, 9 insertions(+), 38 deletions(-) diff --git a/keyboards/orthodox/keymaps/oscillope/config.h b/keyboards/orthodox/keymaps/oscillope/config.h index 3b1fd500078..edd5d74b779 100644 --- a/keyboards/orthodox/keymaps/oscillope/config.h +++ b/keyboards/orthodox/keymaps/oscillope/config.h @@ -19,10 +19,8 @@ You should have received a copy of the GNU General Public License along with this program. If not, see . */ -#ifndef CONFIG_USER_H -#define CONFIG_USER_H +#pragma once -#include "config_common.h" /* Use I2C or Serial, not both */ @@ -37,5 +35,3 @@ along with this program. If not, see . #define TAPPING_TERM 200 #define TAPPING_TOGGLE 3 - -#endif diff --git a/keyboards/orthodox/keymaps/rfvizarra/config.h b/keyboards/orthodox/keymaps/rfvizarra/config.h index 7ac207f0d36..7254621808a 100644 --- a/keyboards/orthodox/keymaps/rfvizarra/config.h +++ b/keyboards/orthodox/keymaps/rfvizarra/config.h @@ -19,10 +19,8 @@ You should have received a copy of the GNU General Public License along with this program. If not, see . */ -#ifndef CONFIG_USER_H -#define CONFIG_USER_H -#include "config_common.h" +#pragma once #ifdef AUDIO_ENABLE #define DEFAULT_LAYER_SONGS { SONG(QWERTY_SOUND), \ @@ -41,5 +39,3 @@ along with this program. If not, see . // #define MASTER_LEFT // #define MASTER_RIGHT #define EE_HANDS - -#endif diff --git a/keyboards/orthodox/keymaps/xyverz/config.h b/keyboards/orthodox/keymaps/xyverz/config.h index fc6d5d23b5a..80d5dfd2ecd 100644 --- a/keyboards/orthodox/keymaps/xyverz/config.h +++ b/keyboards/orthodox/keymaps/xyverz/config.h @@ -19,10 +19,7 @@ You should have received a copy of the GNU General Public License along with this program. If not, see . */ -#ifndef CONFIG_USER_H -#define CONFIG_USER_H - -#include "../../config.h" +#pragma once /* Use I2C or Serial, not both */ @@ -34,5 +31,3 @@ along with this program. If not, see . #define MASTER_LEFT // #define _MASTER_RIGHT // #define EE_HANDS - -#endif diff --git a/keyboards/orthodox/orthodox.h b/keyboards/orthodox/orthodox.h index 51c52455278..6f8dad60acb 100644 --- a/keyboards/orthodox/orthodox.h +++ b/keyboards/orthodox/orthodox.h @@ -1,5 +1,6 @@ -#ifndef ORTHODOX_H -#define ORTHODOX_H +#pragma once + +#include "quantum.h" #ifdef KEYBOARD_orthodox_rev1 #include "rev1.h" @@ -25,7 +26,3 @@ { KC_##LR18, KC_##LR17, KC_##LR16, KC_##LR15, KC_##LR14, KC_##LR13, KC_##LR12, KC_NO, KC_##LR10 }, \ { KC_##LR28, KC_##LR27, KC_##LR26, KC_##LR25, KC_##LR24, KC_##LR23, KC_##LR22, KC_##LR21, KC_##LR20 } \ } - -#include "quantum.h" - -#endif diff --git a/keyboards/orthodox/rev1/rev1.h b/keyboards/orthodox/rev1/rev1.h index e73263fb687..783dfb34b95 100644 --- a/keyboards/orthodox/rev1/rev1.h +++ b/keyboards/orthodox/rev1/rev1.h @@ -19,8 +19,7 @@ You should have received a copy of the GNU General Public License along with this program. If not, see . */ -#ifndef REV1_H -#define REV1_H +#pragma once #include "orthodox.h" @@ -42,7 +41,3 @@ along with this program. If not, see . { R18, R17, R16, R15, R14, R13, R12, KC_NO, R10 }, \ { R28, R27, R26, R25, R24, R23, R22, R21, R20 } \ } - -#endif - - diff --git a/keyboards/orthodox/rev3/rev3.h b/keyboards/orthodox/rev3/rev3.h index 2be9b9605ce..783dfb34b95 100644 --- a/keyboards/orthodox/rev3/rev3.h +++ b/keyboards/orthodox/rev3/rev3.h @@ -19,8 +19,7 @@ You should have received a copy of the GNU General Public License along with this program. If not, see . */ -#ifndef REV3_H -#define REV3_H +#pragma once #include "orthodox.h" @@ -42,6 +41,3 @@ along with this program. If not, see . { R18, R17, R16, R15, R14, R13, R12, KC_NO, R10 }, \ { R28, R27, R26, R25, R24, R23, R22, R21, R20 } \ } - -#endif - diff --git a/keyboards/orthodox/rev3_teensy/rev3_teensy.h b/keyboards/orthodox/rev3_teensy/rev3_teensy.h index 0081a0df011..783dfb34b95 100644 --- a/keyboards/orthodox/rev3_teensy/rev3_teensy.h +++ b/keyboards/orthodox/rev3_teensy/rev3_teensy.h @@ -19,8 +19,7 @@ You should have received a copy of the GNU General Public License along with this program. If not, see . */ -#ifndef REV3_TEENSY_H -#define REV3_TEENSY_H +#pragma once #include "orthodox.h" @@ -42,6 +41,3 @@ along with this program. If not, see . { R18, R17, R16, R15, R14, R13, R12, KC_NO, R10 }, \ { R28, R27, R26, R25, R24, R23, R22, R21, R20 } \ } - -#endif - From cb33643f0209202e5d195613ad685e3cdae4ef2d Mon Sep 17 00:00:00 2001 From: Drashna Jaelre Date: Fri, 22 Mar 2019 14:48:29 -0700 Subject: [PATCH 037/171] Remove user keymap changes --- keyboards/orthodox/keymaps/oscillope/config.h | 6 +++++- keyboards/orthodox/keymaps/rfvizarra/config.h | 6 +++++- keyboards/orthodox/keymaps/xyverz/config.h | 7 ++++++- 3 files changed, 16 insertions(+), 3 deletions(-) diff --git a/keyboards/orthodox/keymaps/oscillope/config.h b/keyboards/orthodox/keymaps/oscillope/config.h index edd5d74b779..3b1fd500078 100644 --- a/keyboards/orthodox/keymaps/oscillope/config.h +++ b/keyboards/orthodox/keymaps/oscillope/config.h @@ -19,8 +19,10 @@ You should have received a copy of the GNU General Public License along with this program. If not, see . */ -#pragma once +#ifndef CONFIG_USER_H +#define CONFIG_USER_H +#include "config_common.h" /* Use I2C or Serial, not both */ @@ -35,3 +37,5 @@ along with this program. If not, see . #define TAPPING_TERM 200 #define TAPPING_TOGGLE 3 + +#endif diff --git a/keyboards/orthodox/keymaps/rfvizarra/config.h b/keyboards/orthodox/keymaps/rfvizarra/config.h index 7254621808a..7ac207f0d36 100644 --- a/keyboards/orthodox/keymaps/rfvizarra/config.h +++ b/keyboards/orthodox/keymaps/rfvizarra/config.h @@ -19,8 +19,10 @@ You should have received a copy of the GNU General Public License along with this program. If not, see . */ +#ifndef CONFIG_USER_H +#define CONFIG_USER_H -#pragma once +#include "config_common.h" #ifdef AUDIO_ENABLE #define DEFAULT_LAYER_SONGS { SONG(QWERTY_SOUND), \ @@ -39,3 +41,5 @@ along with this program. If not, see . // #define MASTER_LEFT // #define MASTER_RIGHT #define EE_HANDS + +#endif diff --git a/keyboards/orthodox/keymaps/xyverz/config.h b/keyboards/orthodox/keymaps/xyverz/config.h index 80d5dfd2ecd..fc6d5d23b5a 100644 --- a/keyboards/orthodox/keymaps/xyverz/config.h +++ b/keyboards/orthodox/keymaps/xyverz/config.h @@ -19,7 +19,10 @@ You should have received a copy of the GNU General Public License along with this program. If not, see . */ -#pragma once +#ifndef CONFIG_USER_H +#define CONFIG_USER_H + +#include "../../config.h" /* Use I2C or Serial, not both */ @@ -31,3 +34,5 @@ along with this program. If not, see . #define MASTER_LEFT // #define _MASTER_RIGHT // #define EE_HANDS + +#endif From 2ffa4798a43682a73598c0b43d46abcca7cd6e83 Mon Sep 17 00:00:00 2001 From: Lenbok Date: Sat, 6 Apr 2019 13:19:42 +1300 Subject: [PATCH 038/171] Fix bugs that cause compile failures when enabling only some animations. --- quantum/rgb_matrix.c | 2 +- quantum/rgb_matrix_animations/breathing_anim.h | 1 + 2 files changed, 2 insertions(+), 1 deletion(-) diff --git a/quantum/rgb_matrix.c b/quantum/rgb_matrix.c index 413e5777fcd..a1193d4c072 100644 --- a/quantum/rgb_matrix.c +++ b/quantum/rgb_matrix.c @@ -101,7 +101,7 @@ void eeconfig_update_rgb_matrix(uint32_t val) { void eeconfig_update_rgb_matrix_default(void) { dprintf("eeconfig_update_rgb_matrix_default\n"); rgb_matrix_config.enable = 1; -#ifndef DISABLE_RGB_MATRIX_CYCLE_ALL +#ifndef DISABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT rgb_matrix_config.mode = RGB_MATRIX_CYCLE_LEFT_RIGHT; #else // fallback to solid colors if RGB_MATRIX_CYCLE_LEFT_RIGHT is disabled in userspace diff --git a/quantum/rgb_matrix_animations/breathing_anim.h b/quantum/rgb_matrix_animations/breathing_anim.h index fb90b66bdf0..4a9a1dcdb24 100644 --- a/quantum/rgb_matrix_animations/breathing_anim.h +++ b/quantum/rgb_matrix_animations/breathing_anim.h @@ -1,6 +1,7 @@ #pragma once #ifndef DISABLE_RGB_MATRIX_BREATHING +extern rgb_counters_t g_rgb_counters; extern rgb_config_t rgb_matrix_config; bool rgb_matrix_breathing(effect_params_t* params) { From 410984486b0a5c61174c6e4e5a3570f1b09f97dc Mon Sep 17 00:00:00 2001 From: MechMerlin <30334081+mechmerlin@users.noreply.github.com> Date: Sat, 6 Apr 2019 17:30:48 -0700 Subject: [PATCH 039/171] i2c_init update to work with atmega32a boards (#5562) * On i2c_init, enable two wire interface, twi interrupt, and slave address ACK along with pull up resistors. * thanks to some testing by drashna, we know that setting TWI doesn't work for all boards. Putting the new code into an ifdef block --- drivers/avr/i2c_master.c | 12 ++++++++++++ 1 file changed, 12 insertions(+) diff --git a/drivers/avr/i2c_master.c b/drivers/avr/i2c_master.c index 0db949db4ab..ba6d0d1586e 100755 --- a/drivers/avr/i2c_master.c +++ b/drivers/avr/i2c_master.c @@ -18,6 +18,18 @@ void i2c_init(void) { TWSR = 0; /* no prescaler */ TWBR = (uint8_t)TWBR_val; + + #ifdef __AVR_ATmega32A__ + // set pull-up resistors on I2C bus pins + PORTC |= 0b11; + + // enable TWI (two-wire interface) + TWCR |= (1 << TWEN); + + // enable TWI interrupt and slave address ACK + TWCR |= (1 << TWIE); + TWCR |= (1 << TWEA); + #endif } i2c_status_t i2c_start(uint8_t address, uint16_t timeout) { From 5c1ef2bddc0fa5d4753d33a5ec8fed5d9da736c8 Mon Sep 17 00:00:00 2001 From: MechMerlin <30334081+mechmerlin@users.noreply.github.com> Date: Sat, 6 Apr 2019 18:08:57 -0700 Subject: [PATCH 040/171] [Keyboard] Panc60 Refactor (#5559) * remove unneeded uart setting * use pragma once everywhere * remove custom matrix support * fixup readme * set bootmagic to lite * remove dependency on custom i2c code * use the right header files and function calls --- keyboards/panc60/config.h | 2 - keyboards/panc60/i2c.c | 106 ------------------------- keyboards/panc60/i2c.h | 27 ------- keyboards/panc60/matrix.c | 145 ----------------------------------- keyboards/panc60/panc60.c | 4 +- keyboards/panc60/panc60.h | 5 +- keyboards/panc60/readme.md | 8 +- keyboards/panc60/rules.mk | 5 +- keyboards/panc60/usbconfig.h | 5 +- 9 files changed, 11 insertions(+), 296 deletions(-) delete mode 100644 keyboards/panc60/i2c.c delete mode 100644 keyboards/panc60/i2c.h delete mode 100644 keyboards/panc60/matrix.c diff --git a/keyboards/panc60/config.h b/keyboards/panc60/config.h index 00bdbc60f1b..edb25ad2743 100644 --- a/keyboards/panc60/config.h +++ b/keyboards/panc60/config.h @@ -39,5 +39,3 @@ along with this program. If not, see . #define NO_BACKLIGHT_CLOCK #define BACKLIGHT_LEVELS 1 #define RGBLIGHT_ANIMATIONS - -#define NO_UART 1 diff --git a/keyboards/panc60/i2c.c b/keyboards/panc60/i2c.c deleted file mode 100644 index e8c4455ad1b..00000000000 --- a/keyboards/panc60/i2c.c +++ /dev/null @@ -1,106 +0,0 @@ -/* -Copyright 2016 Luiz Ribeiro - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see . -*/ - -// Please do not modify this file - -#include -#include - -#include "i2c.h" - -void i2c_set_bitrate(uint16_t bitrate_khz) { - uint8_t bitrate_div = ((F_CPU / 1000l) / bitrate_khz); - if (bitrate_div >= 16) { - bitrate_div = (bitrate_div - 16) / 2; - } - TWBR = bitrate_div; -} - -void i2c_init(void) { - // set pull-up resistors on I2C bus pins - PORTC |= 0b11; - - i2c_set_bitrate(400); - - // enable TWI (two-wire interface) - TWCR |= (1 << TWEN); - - // enable TWI interrupt and slave address ACK - TWCR |= (1 << TWIE); - TWCR |= (1 << TWEA); -} - -uint8_t i2c_start(uint8_t address) { - // reset TWI control register - TWCR = 0; - - // begin transmission and wait for it to end - TWCR = (1< - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see . -*/ - -// Please do not modify this file - -#ifndef __I2C_H__ -#define __I2C_H__ - -void i2c_init(void); -void i2c_set_bitrate(uint16_t bitrate_khz); -uint8_t i2c_send(uint8_t address, uint8_t *data, uint16_t length); - -#endif diff --git a/keyboards/panc60/matrix.c b/keyboards/panc60/matrix.c deleted file mode 100644 index cf0f63837b9..00000000000 --- a/keyboards/panc60/matrix.c +++ /dev/null @@ -1,145 +0,0 @@ -/* -Copyright 2018 Jack Humbert - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see . -*/ - -#include -#include -#include -#include "matrix.h" - -#ifndef DEBOUNCE -# define DEBOUNCE 5 -#endif - -__attribute__ ((weak)) -void matrix_init_kb(void) { - matrix_init_user(); -} - -__attribute__ ((weak)) -void matrix_scan_kb(void) { - matrix_scan_user(); -} - -__attribute__ ((weak)) -void matrix_init_user(void) { } - -__attribute__ ((weak)) -void matrix_scan_user(void) { } - -// #define MATRIX_ROW_PINS { B3, B4, B5, B6, B7 } -// #define MATRIX_COL_PINS { A0, A1, A2, A3, A4, A5, A6, A7, C7, C6, C5, C4, C3, C2, D7 } - -static uint8_t debouncing = DEBOUNCE; - -static matrix_row_t matrix[MATRIX_ROWS]; -static matrix_row_t matrix_debouncing[MATRIX_ROWS]; - -void matrix_init(void) { - - // disables JTAG so we can use them as columns - MCUCSR = (1< #include "action_layer.h" -#include "i2c.h" +#include "i2c_master.h" #include "quantum.h" __attribute__ ((weak)) @@ -44,7 +44,7 @@ void rgblight_set(void) { } i2c_init(); - i2c_send(0xb0, (uint8_t*)led, 3 * RGBLED_NUM); + i2c_transmit(0xb0, (uint8_t*)led, 3 * RGBLED_NUM, 100); } #endif diff --git a/keyboards/panc60/panc60.h b/keyboards/panc60/panc60.h index 95dcb1f90be..ee4569c615c 100644 --- a/keyboards/panc60/panc60.h +++ b/keyboards/panc60/panc60.h @@ -13,8 +13,7 @@ * You should have received a copy of the GNU General Public License * along with this program. If not, see . */ -#ifndef PANC60_H -#define PANC60_H +#pragma once #include "quantum.h" @@ -67,5 +66,3 @@ { K30, KC_NO, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, KC_NO, K3D, K3E }, \ { KC_NO, K41, K42, KC_NO, KC_NO, KC_NO, KC_NO, K47, KC_NO, KC_NO, K4A, KC_NO, K4C, KC_NO, KC_NO } \ } - -#endif diff --git a/keyboards/panc60/readme.md b/keyboards/panc60/readme.md index 05ac3d72bee..737f238f6c8 100644 --- a/keyboards/panc60/readme.md +++ b/keyboards/panc60/readme.md @@ -14,6 +14,8 @@ Make example for this keyboard (after setting up your build environment): Flashing +**Reset Key:** Hold down the key located at `K40`, commonly programmed as left control while plugging in the keyboard. You may also hold down the key located at `K00`, commonly programmed as the `Esc` key. + ps2avr(GB) boards use an atmega32a microcontroller and a different bootloader. It is not flashable using the regular QMK methods. To put the panc60 into reset, hold left control while plugging in. @@ -36,9 +38,9 @@ macOS: ``` 3. Install the following packages: ``` - brew install python - brew install pyusb - brew install --HEAD`https://raw.githubusercontent.com/robertgzr/homebrew-tap/master/bootloadhid.rb + brew install python3 + pip3 install pyusb + brew install --HEAD https://raw.githubusercontent.com/robertgzr/homebrew-tap/master/bootloadhid.rb 4. Place your keyboard into reset. 5. Flash the board by typing `bootloadHID -r` followed by the path to your `.hex` file. diff --git a/keyboards/panc60/rules.mk b/keyboards/panc60/rules.mk index 588562a95b4..8438751822b 100644 --- a/keyboards/panc60/rules.mk +++ b/keyboards/panc60/rules.mk @@ -31,7 +31,7 @@ F_CPU = 12000000 BOOTLOADER = bootloadHID # build options -BOOTMAGIC_ENABLE = yes +BOOTMAGIC_ENABLE = lite MOUSEKEY_ENABLE = yes EXTRAKEY_ENABLE = yes CONSOLE_ENABLE = yes @@ -43,8 +43,7 @@ RGBLIGHT_CUSTOM_DRIVER = yes OPT_DEFS = -DDEBUG_LEVEL=0 # custom matrix setup -CUSTOM_MATRIX = yes -SRC = matrix.c i2c.c +SRC = i2c_master.c # programming options PROGRAM_CMD = ./util/atmega32a_program.py $(TARGET).hex diff --git a/keyboards/panc60/usbconfig.h b/keyboards/panc60/usbconfig.h index d2d848fcdc8..54a7d20f142 100644 --- a/keyboards/panc60/usbconfig.h +++ b/keyboards/panc60/usbconfig.h @@ -8,8 +8,7 @@ * This Revision: $Id: usbconfig-prototype.h 785 2010-05-30 17:57:07Z cs $ */ -#ifndef __usbconfig_h_included__ -#define __usbconfig_h_included__ +#pragma once #include "config.h" @@ -392,5 +391,3 @@ section at the end of this file). /* #define USB_INTR_PENDING EIFR */ #define USB_INTR_PENDING_BIT INTF1 #define USB_INTR_VECTOR INT1_vect - -#endif /* __usbconfig_h_included__ */ From 44435d74447df0b190e02201181416d3d4b8cdff Mon Sep 17 00:00:00 2001 From: mechmerlin Date: Sat, 6 Apr 2019 18:30:15 -0700 Subject: [PATCH 041/171] remove custom i2c code in favor of QMK i2c_master --- keyboards/exclusive/e6v2/bmc/bmc.c | 4 +- keyboards/exclusive/e6v2/bmc/i2c.c | 106 -------------------------- keyboards/exclusive/e6v2/bmc/i2c.h | 24 ------ keyboards/exclusive/e6v2/bmc/rules.mk | 2 +- 4 files changed, 3 insertions(+), 133 deletions(-) delete mode 100644 keyboards/exclusive/e6v2/bmc/i2c.c delete mode 100644 keyboards/exclusive/e6v2/bmc/i2c.h diff --git a/keyboards/exclusive/e6v2/bmc/bmc.c b/keyboards/exclusive/e6v2/bmc/bmc.c index e3dd244c516..257b68b8b4e 100644 --- a/keyboards/exclusive/e6v2/bmc/bmc.c +++ b/keyboards/exclusive/e6v2/bmc/bmc.c @@ -15,7 +15,7 @@ */ #include "bmc.h" #include "rgblight.h" -#include "i2c.h" +#include "i2c_master.h" void matrix_init_kb(void) { // put your keyboard start-up code here @@ -57,7 +57,7 @@ void rgblight_set(void) { } i2c_init(); - i2c_send(0xb0, (uint8_t*)led, 3 * RGBLED_NUM); + i2c_transmit(0xb0, (uint8_t*)led, 3 * RGBLED_NUM, 100); } #endif diff --git a/keyboards/exclusive/e6v2/bmc/i2c.c b/keyboards/exclusive/e6v2/bmc/i2c.c deleted file mode 100644 index 801242e0d08..00000000000 --- a/keyboards/exclusive/e6v2/bmc/i2c.c +++ /dev/null @@ -1,106 +0,0 @@ -/* -Copyright 2016 Luiz Ribeiro - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see . -*/ - -// Please do not modify this file - -#include -#include - -#include "i2c.h" - -void i2c_set_bitrate(uint16_t bitrate_khz) { - uint8_t bitrate_div = ((F_CPU / 1000l) / bitrate_khz); - if (bitrate_div >= 16) { - bitrate_div = (bitrate_div - 16) / 2; - } - TWBR = bitrate_div; -} - -void i2c_init(void) { - // set pull-up resistors on I2C bus pins - PORTC |= 0b11; - - i2c_set_bitrate(400); - - // enable TWI (two-wire interface) - TWCR |= (1 << TWEN); - - // enable TWI interrupt and slave address ACK - TWCR |= (1 << TWIE); - TWCR |= (1 << TWEA); -} - -uint8_t i2c_start(uint8_t address) { - // reset TWI control register - TWCR = 0; - - // begin transmission and wait for it to end - TWCR = (1< - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see . -*/ - -// Please do not modify this file - -#pragma once - -void i2c_init(void); -void i2c_set_bitrate(uint16_t bitrate_khz); -uint8_t i2c_send(uint8_t address, uint8_t *data, uint16_t length); \ No newline at end of file diff --git a/keyboards/exclusive/e6v2/bmc/rules.mk b/keyboards/exclusive/e6v2/bmc/rules.mk index 7c3e16b1544..59f98e6f4ba 100644 --- a/keyboards/exclusive/e6v2/bmc/rules.mk +++ b/keyboards/exclusive/e6v2/bmc/rules.mk @@ -85,6 +85,6 @@ AUDIO_ENABLE = no # Audio output on port C6 FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches HD44780_ENABLE = no # Enable support for HD44780 based LCDs (+400) -SRC += i2c.c +SRC += i2c_master.c PROGRAM_CMD = ./util/atmega32a_program.py $(TARGET).hex From f6c305ba52f68880585af3cc6c1642a4d76deb7e Mon Sep 17 00:00:00 2001 From: mechmerlin Date: Sat, 6 Apr 2019 18:31:00 -0700 Subject: [PATCH 042/171] clean up config file --- keyboards/exclusive/e6v2/bmc/config.h | 8 ++------ 1 file changed, 2 insertions(+), 6 deletions(-) diff --git a/keyboards/exclusive/e6v2/bmc/config.h b/keyboards/exclusive/e6v2/bmc/config.h index aae4d56dd9a..44e77f69810 100644 --- a/keyboards/exclusive/e6v2/bmc/config.h +++ b/keyboards/exclusive/e6v2/bmc/config.h @@ -45,13 +45,9 @@ along with this program. If not, see . #define MATRIX_COL_PINS { A0, A1, A2, A3, A4, A5, C2, C3, C4, C5, D7 } #define DIODE_DIRECTION COL2ROW - #define RGBLED_NUM 6 #define RGBLIGHT_ANIMATIONS -#define NO_UART 1 -#define BOOTLOADHID_BOOTLOADER 1 - -// Set bootmagic lite key to the key commonly programmed as Esc. +// Set bootmagic lite key to the key commonly programmed as Esc. #define BOOTMAGIC_LITE_ROW 5 -#define BOOTMAGIC_LITE_COLUMN 0 \ No newline at end of file +#define BOOTMAGIC_LITE_COLUMN 0 From 8173db634daa0eaa6cfe7dc5a556ff2193ec078f Mon Sep 17 00:00:00 2001 From: mechmerlin Date: Sat, 6 Apr 2019 18:31:36 -0700 Subject: [PATCH 043/171] fix pyusb install instructions --- keyboards/exclusive/e6v2/bmc/readme.md | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/keyboards/exclusive/e6v2/bmc/readme.md b/keyboards/exclusive/e6v2/bmc/readme.md index 3e2d19748d2..a19a523adac 100644 --- a/keyboards/exclusive/e6v2/bmc/readme.md +++ b/keyboards/exclusive/e6v2/bmc/readme.md @@ -34,9 +34,9 @@ macOS: ``` 3. Install the following packages: ``` - brew install python + brew install python3 pip3 install pyusb - brew install --HEAD`https://raw.githubusercontent.com/robertgzr/homebrew-tap/master/bootloadhid.rb + brew install --HEAD https://raw.githubusercontent.com/robertgzr/homebrew-tap/master/bootloadhid.rb 4. Place your keyboard into reset. 5. Flash the board by typing `bootloadHID -r` followed by the path to your `.hex` file. From 0baa1e2b2fe8e7918e26edac12bb4a6e2e151b1d Mon Sep 17 00:00:00 2001 From: mechmerlin Date: Sat, 6 Apr 2019 18:33:32 -0700 Subject: [PATCH 044/171] fix naming in usbconfig.h --- keyboards/exclusive/e6v2/bmc/usbconfig.h | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/keyboards/exclusive/e6v2/bmc/usbconfig.h b/keyboards/exclusive/e6v2/bmc/usbconfig.h index c52c90ce8a5..f22f2b631db 100644 --- a/keyboards/exclusive/e6v2/bmc/usbconfig.h +++ b/keyboards/exclusive/e6v2/bmc/usbconfig.h @@ -240,8 +240,8 @@ section at the end of this file). #define USB_CFG_DEVICE_VERSION 0x00, 0x02 /* Version number of the device: Minor number first, then major number. */ -#define USB_CFG_VENDOR_NAME 'G', 'r', 'a', 'y', ' ', 'S', 't', 'u', 'd', 'i', 'o' -#define USB_CFG_VENDOR_NAME_LEN 11 +#define USB_CFG_VENDOR_NAME 'E', 'x', 'c', 'l', 'u', 's', 'i', 'v', 'e' +#define USB_CFG_VENDOR_NAME_LEN 9 /* These two values define the vendor name returned by the USB device. The name * must be given as a list of characters under single quotes. The characters * are interpreted as Unicode (UTF-16) entities. @@ -250,7 +250,7 @@ section at the end of this file). * obdev's free shared VID/PID pair. See the file USB-IDs-for-free.txt for * details. */ -#define USB_CFG_DEVICE_NAME 'H', 'B', '8', '5' +#define USB_CFG_DEVICE_NAME 'E', '6', 'V', '2' #define USB_CFG_DEVICE_NAME_LEN 4 /* Same as above for the device name. If you don't want a device name, undefine * the macros. See the file USB-IDs-for-free.txt before you assign a name if From 1b9f82c8445368dce0e0ada9af1f43956093fa98 Mon Sep 17 00:00:00 2001 From: mechmerlin Date: Sat, 6 Apr 2019 19:24:41 -0700 Subject: [PATCH 045/171] disable bootmagic as it does not work for bmc boards --- keyboards/exclusive/e6v2/bmc/config.h | 4 ---- keyboards/exclusive/e6v2/bmc/readme.md | 2 +- keyboards/exclusive/e6v2/bmc/rules.mk | 2 +- 3 files changed, 2 insertions(+), 6 deletions(-) diff --git a/keyboards/exclusive/e6v2/bmc/config.h b/keyboards/exclusive/e6v2/bmc/config.h index 44e77f69810..7c6fcccdb98 100644 --- a/keyboards/exclusive/e6v2/bmc/config.h +++ b/keyboards/exclusive/e6v2/bmc/config.h @@ -47,7 +47,3 @@ along with this program. If not, see . #define RGBLED_NUM 6 #define RGBLIGHT_ANIMATIONS - -// Set bootmagic lite key to the key commonly programmed as Esc. -#define BOOTMAGIC_LITE_ROW 5 -#define BOOTMAGIC_LITE_COLUMN 0 diff --git a/keyboards/exclusive/e6v2/bmc/readme.md b/keyboards/exclusive/e6v2/bmc/readme.md index a19a523adac..b69ac792cf8 100644 --- a/keyboards/exclusive/e6v2/bmc/readme.md +++ b/keyboards/exclusive/e6v2/bmc/readme.md @@ -14,7 +14,7 @@ Flashing ps2avr(GB) boards use an atmega32a microcontroller and a different bootloader. It is not flashable using the regular QMK methods. -**Reset Key:** Hold down the key located at `K00`, commonly programmed as left control while plugging in the keyboard. You may also hold down the key located at `K50`, commonly programmed as the escape key. +**Reset Key:** Hold down the key located at `K00`, commonly programmed as left control while plugging in the keyboard. Windows: 1. Download [HIDBootFlash](http://vusb.wikidot.com/project:hidbootflash). diff --git a/keyboards/exclusive/e6v2/bmc/rules.mk b/keyboards/exclusive/e6v2/bmc/rules.mk index 59f98e6f4ba..885bce24538 100644 --- a/keyboards/exclusive/e6v2/bmc/rules.mk +++ b/keyboards/exclusive/e6v2/bmc/rules.mk @@ -66,7 +66,7 @@ BOOTLOADER = bootloadHID # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration(+1000) +BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) MOUSEKEY_ENABLE = yes # Mouse keys(+4700) EXTRAKEY_ENABLE = yes # Audio control and System control(+450) CONSOLE_ENABLE = yes # Console for debug(+400) From 0231caa25aa258a79a7fb73cc57723655055b928 Mon Sep 17 00:00:00 2001 From: MechMerlin <30334081+mechmerlin@users.noreply.github.com> Date: Sun, 7 Apr 2019 07:30:40 -0700 Subject: [PATCH 046/171] [Keyboard] Refactor FaceW for new BMC changes (#5575) * use #pragma once for guards * update readme and fix pyusb install instructions * replace custom i2c code with QMK i2c_master * remove unneeded code from config.h * fix keyboard name * remove custom matrix and i2c driver * turn off bootmagic, turn on leds * remove keymap in favor of userspace/community layouts keymap * remove custom matrix * update readme --- keyboards/facew/config.h | 7 +- keyboards/facew/facew.c | 4 +- keyboards/facew/facew.h | 5 +- keyboards/facew/i2c.c | 106 ------------------- keyboards/facew/i2c.h | 27 ----- keyboards/facew/keymaps/mechmerlin/keymap.c | 51 --------- keyboards/facew/keymaps/mechmerlin/readme.md | 18 ---- keyboards/facew/matrix.c | 106 ------------------- keyboards/facew/readme.md | 20 ++-- keyboards/facew/rules.mk | 9 +- keyboards/facew/usbconfig.h | 13 +-- 11 files changed, 20 insertions(+), 346 deletions(-) delete mode 100644 keyboards/facew/i2c.c delete mode 100644 keyboards/facew/i2c.h delete mode 100644 keyboards/facew/keymaps/mechmerlin/keymap.c delete mode 100644 keyboards/facew/keymaps/mechmerlin/readme.md delete mode 100644 keyboards/facew/matrix.c diff --git a/keyboards/facew/config.h b/keyboards/facew/config.h index c952ca73723..b4fb0d4cddd 100644 --- a/keyboards/facew/config.h +++ b/keyboards/facew/config.h @@ -15,8 +15,7 @@ You should have received a copy of the GNU General Public License along with this program. If not, see . */ -#ifndef FACEW_CONFIG_H -#define FACEW_CONFIG_H +#pragma once #include "config_common.h" @@ -40,7 +39,3 @@ along with this program. If not, see . #define NO_BACKLIGHT_CLOCK #define BACKLIGHT_LEVELS 1 #define RGBLIGHT_ANIMATIONS - -#define NO_UART 1 - -#endif diff --git a/keyboards/facew/facew.c b/keyboards/facew/facew.c index 9c255c68f45..7ec56548b16 100644 --- a/keyboards/facew/facew.c +++ b/keyboards/facew/facew.c @@ -26,7 +26,7 @@ along with this program. If not, see . #include #include "action_layer.h" -#include "i2c.h" +#include "i2c_master.h" #include "quantum.h" #ifdef RGBLIGHT_ENABLE @@ -42,7 +42,7 @@ void rgblight_set(void) { } i2c_init(); - i2c_send(0xb0, (uint8_t*)led, 3 * RGBLED_NUM); + i2c_transmit(0xb0, (uint8_t*)led, 3 * RGBLED_NUM, 100); } #endif diff --git a/keyboards/facew/facew.h b/keyboards/facew/facew.h index 215e06090cc..b3356f2628e 100644 --- a/keyboards/facew/facew.h +++ b/keyboards/facew/facew.h @@ -15,8 +15,7 @@ You should have received a copy of the GNU General Public License along with this program. If not, see . */ -#ifndef FACEW_H -#define FACEW_H +#pragma once #include "quantum.h" @@ -53,5 +52,3 @@ along with this program. If not, see . { KC_NO, K61, KC_NO, KC_NO, K64, K65, K66, KC_NO, K68, K69, K60}, \ { KC_NO, K71, K72, K73, K74, K75, K76, K77, K78, KC_NO, KC_NO}, \ } - -#endif diff --git a/keyboards/facew/i2c.c b/keyboards/facew/i2c.c deleted file mode 100644 index a4f95213524..00000000000 --- a/keyboards/facew/i2c.c +++ /dev/null @@ -1,106 +0,0 @@ -/* -Copyright 2016 Luiz Ribeiro - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see . -*/ - -// Please do not modify this file - -#include -#include - -#include "i2c.h" - -void i2c_set_bitrate(uint16_t bitrate_khz) { - uint8_t bitrate_div = ((F_CPU / 1000l) / bitrate_khz); - if (bitrate_div >= 16) { - bitrate_div = (bitrate_div - 16) / 2; - } - TWBR = bitrate_div; -} - -void i2c_init(void) { - // set pull-up resistors on I2C bus pins - PORTC |= 0b11; - - i2c_set_bitrate(400); - - // enable TWI (two-wire interface) - TWCR |= (1 << TWEN); - - // enable TWI interrupt and slave address ACK - TWCR |= (1 << TWIE); - TWCR |= (1 << TWEA); -} - -uint8_t i2c_start(uint8_t address) { - // reset TWI control register - TWCR = 0; - - // begin transmission and wait for it to end - TWCR = (1< - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see . -*/ - -// Please do not modify this file - -#ifndef __I2C_H__ -#define __I2C_H__ - -void i2c_init(void); -void i2c_set_bitrate(uint16_t bitrate_khz); -uint8_t i2c_send(uint8_t address, uint8_t *data, uint16_t length); - -#endif diff --git a/keyboards/facew/keymaps/mechmerlin/keymap.c b/keyboards/facew/keymaps/mechmerlin/keymap.c deleted file mode 100644 index d7fb7a7aed3..00000000000 --- a/keyboards/facew/keymaps/mechmerlin/keymap.c +++ /dev/null @@ -1,51 +0,0 @@ -/* -Copyright 2017 Luiz Ribeiro - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see . -*/ - -#include QMK_KEYBOARD_H - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - [0] = LAYOUT_all( - KC_GESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_NO, KC_BSPC, - KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, - KC_LCTL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_NO, KC_ENT, - KC_LSFT, KC_NO, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, TG(2), - KC_LCTL, KC_LGUI, KC_LALT, KC_SPACE, MO(1), KC_RALT, KC_RGUI, KC_RCTL - ), - [1] = LAYOUT_all( - KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_NO, KC_DEL, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_CAPS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - MO(3), KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_MUTE, KC_VOLD, KC_VOLU, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS - ), - [2] = LAYOUT_all( - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_UP, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_LEFT, KC_DOWN, KC_RIGHT - ), - - [3] = LAYOUT_all( - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RESET, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS - ), -}; - diff --git a/keyboards/facew/keymaps/mechmerlin/readme.md b/keyboards/facew/keymaps/mechmerlin/readme.md deleted file mode 100644 index eeb83b0a16d..00000000000 --- a/keyboards/facew/keymaps/mechmerlin/readme.md +++ /dev/null @@ -1,18 +0,0 @@ -MechMerlin's FaceW Sprit Edition Layout -====================== - -This is the preferred 60% layout used by u/merlin36, host of the [MechMerlin YouTube channel](www.youtube.com/mechmerlin). - -## Keyboard Notes -- The FaceW Sprit Edition can be purchased on [mechanicalkeyboards.com](www.mechanicalkeyboards.com) -- Uses ps2avru instead of ps2avrgb -- To put in reset mode hold `q` while inserting the USB cable -- Use flashing instructions from ps2avrgb QMK port - -## Keymap Notes -- Does not support any form of inswitch lighting as Merlin hates them. -- Arrow toggle switch to the right of right shift -- Reset is FN + Left Shift + R - -### Build -To build this keymap, simply run `make facew:mechmerlin` from the qmk_firmware directory. diff --git a/keyboards/facew/matrix.c b/keyboards/facew/matrix.c deleted file mode 100644 index 57aa36b5ff7..00000000000 --- a/keyboards/facew/matrix.c +++ /dev/null @@ -1,106 +0,0 @@ -/* -Copyright 2017 Luiz Ribeiro - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see . -*/ - -#include -#include - -#include "matrix.h" - -#ifndef DEBOUNCE -#define DEBOUNCE 5 -#endif - -static uint8_t debouncing = DEBOUNCE; - -static matrix_row_t matrix[MATRIX_ROWS]; -static matrix_row_t matrix_debouncing[MATRIX_ROWS]; - -void matrix_init(void) { - // all outputs for rows high - DDRB = 0xFF; - PORTB = 0xFF; - // all inputs for columns - DDRA = 0x00; - DDRC &= ~(0x111111<<2); - DDRD &= ~(1<> 1) & 0x55) | ((x << 1) & 0xaa); - x = ((x >> 2) & 0x33) | ((x << 2) & 0xcc); - x = ((x >> 4) & 0x0f) | ((x << 4) & 0xf0); - return x; -} - -uint8_t matrix_scan(void) { - for (uint8_t row = 0; row < MATRIX_ROWS; row++) { - matrix_set_row_status(row); - _delay_us(5); - - matrix_row_t cols = ( - // cols 0..7, PORTA 0 -> 7 - (~PINA) & 0xFF - ) | ( - // cols 8..13, PORTC 7 -> 0 - bit_reverse((~PINC) & 0xFF) << 8 - ) | ( - // col 14, PORTD 7 - ((~PIND) & (1 << PIND7)) << 7 - ); - - if (matrix_debouncing[row] != cols) { - matrix_debouncing[row] = cols; - debouncing = DEBOUNCE; - } - } - - if (debouncing) { - if (--debouncing) { - _delay_ms(1); - } else { - for (uint8_t i = 0; i < MATRIX_ROWS; i++) { - matrix[i] = matrix_debouncing[i]; - } - } - } - - matrix_scan_user(); - - return 1; -} - -inline matrix_row_t matrix_get_row(uint8_t row) { - return matrix[row]; -} - -void matrix_print(void) { -} diff --git a/keyboards/facew/readme.md b/keyboards/facew/readme.md index 578dcf88884..b749d18d296 100644 --- a/keyboards/facew/readme.md +++ b/keyboards/facew/readme.md @@ -2,20 +2,12 @@ A 60% no frills keyboard. -The FaceW is a special run of the WKL B.Face sourced from Sprit that doesn't have underglow RGB LEDs -but does have in switch LEDs. Also unlike the B.Face, it is based on ps2avru instead of ps2avrGB. It -is designed and manufactured in Korea. It originally uses BootMapperClient for programming but -can now also use QMK. +The FaceW is a special run of the WKL B.Face sourced from Sprit that doesn't have underglow RGB LEDs but does have in switch LEDs. Also unlike the B.Face, it is based on ps2avru instead of ps2avrGB. It is designed and manufactured in Korea. Keyboard Maintainer: [MechMerlin](www.github.com/mechmerlin) Hardware Supported: FaceW Sprit Edition PCB Hardware Availability: https://mechanicalkeyboards.com/shop/index.php?l=product_detail&p=1352 -## Keyboard Notes -- The FaceW Sprit Edition can be purchased on [mechanicalkeyboards.com](www.mechanicalkeyboards.com) -- Uses ps2avru instead of ps2avrgb -- To put in reset mode hold `q` while inserting the USB cable - Make example for this keyboard (after setting up your build environment): make facew:default @@ -24,6 +16,8 @@ Flashing ps2avr(GB) boards use an atmega32a microcontroller and a different bootloader. It is not flashable using the regular QMK methods. +**Reset Key:** To put the FaceW into reset, hold `q` (`K01`) while plugging in. + Windows: 1. Download [HIDBootFlash](http://vusb.wikidot.com/project:hidbootflash). 2. Place your keyboard into reset. @@ -42,12 +36,12 @@ macOS: ``` 3. Install the following packages: ``` - brew install python - brew install pyusb - brew install --HEAD`https://raw.githubusercontent.com/robertgzr/homebrew-tap/master/bootloadhid.rb + brew install python3 + pip3 install pyusb + brew install --HEAD https://raw.githubusercontent.com/robertgzr/homebrew-tap/master/bootloadhid.rb 4. Place your keyboard into reset. 5. Flash the board by typing `bootloadHID -r` followed by the path to your `.hex` file. -See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) then the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/facew/rules.mk b/keyboards/facew/rules.mk index 77d29b3320d..b939b0fd240 100644 --- a/keyboards/facew/rules.mk +++ b/keyboards/facew/rules.mk @@ -31,20 +31,19 @@ F_CPU = 12000000 BOOTLOADER = bootloadHID # build options -BOOTMAGIC_ENABLE = yes +BOOTMAGIC_ENABLE = no MOUSEKEY_ENABLE = yes EXTRAKEY_ENABLE = yes CONSOLE_ENABLE = yes COMMAND_ENABLE = yes -BACKLIGHT_ENABLE = no -RGBLIGHT_ENABLE = no +BACKLIGHT_ENABLE = yes +RGBLIGHT_ENABLE = yes RGBLIGHT_CUSTOM_DRIVER = yes OPT_DEFS = -DDEBUG_LEVEL=0 # custom matrix setup -CUSTOM_MATRIX = yes -SRC = matrix.c i2c.c +SRC = i2c_master.c # programming options PROGRAM_CMD = ./util/atmega32a_program.py $(TARGET).hex diff --git a/keyboards/facew/usbconfig.h b/keyboards/facew/usbconfig.h index d2d848fcdc8..f3d663f8a6e 100644 --- a/keyboards/facew/usbconfig.h +++ b/keyboards/facew/usbconfig.h @@ -8,8 +8,7 @@ * This Revision: $Id: usbconfig-prototype.h 785 2010-05-30 17:57:07Z cs $ */ -#ifndef __usbconfig_h_included__ -#define __usbconfig_h_included__ +#pragma once #include "config.h" @@ -241,8 +240,8 @@ section at the end of this file). #define USB_CFG_DEVICE_VERSION 0x00, 0x02 /* Version number of the device: Minor number first, then major number. */ -#define USB_CFG_VENDOR_NAME 'w', 'i', 'n', 'k', 'e', 'y', 'l', 'e', 's', 's', '.', 'k', 'r' -#define USB_CFG_VENDOR_NAME_LEN 13 +#define USB_CFG_VENDOR_NAME 'S', 'p', 'r', 'i', 't' +#define USB_CFG_VENDOR_NAME_LEN 5 /* These two values define the vendor name returned by the USB device. The name * must be given as a list of characters under single quotes. The characters * are interpreted as Unicode (UTF-16) entities. @@ -251,8 +250,8 @@ section at the end of this file). * obdev's free shared VID/PID pair. See the file USB-IDs-for-free.txt for * details. */ -#define USB_CFG_DEVICE_NAME 'p', 's', '2', 'a', 'v', 'r', 'G', 'B' -#define USB_CFG_DEVICE_NAME_LEN 8 +#define USB_CFG_DEVICE_NAME 'F', 'a', 'c', 'e', 'W' +#define USB_CFG_DEVICE_NAME_LEN 5 /* Same as above for the device name. If you don't want a device name, undefine * the macros. See the file USB-IDs-for-free.txt before you assign a name if * you use a shared VID/PID. @@ -392,5 +391,3 @@ section at the end of this file). /* #define USB_INTR_PENDING EIFR */ #define USB_INTR_PENDING_BIT INTF1 #define USB_INTR_VECTOR INT1_vect - -#endif /* __usbconfig_h_included__ */ From 18a9f7999e15dd234dda55f7946df829ce11d54b Mon Sep 17 00:00:00 2001 From: noroadsleft <18669334+noroadsleft@users.noreply.github.com> Date: Sun, 7 Apr 2019 07:32:06 -0700 Subject: [PATCH 047/171] [Keymap] Updates to noroadsleft keymap for KC60 (2019-04-07) (#5576) * Update macros and keycode handling - Update NUBS_Z macro so it repeats when held down - Number row now uses numpad keycodes if Right Alt is being held - coding conventions and formatting update - switched to four-space indent - reformatted a block comment * Update readme files --- keyboards/kc60/keymaps/noroadsleft/keymap.c | 619 +++++++++--------- keyboards/kc60/keymaps/noroadsleft/readme.md | 2 +- .../kc60/keymaps/noroadsleft/readme_ch3.md | 2 +- .../kc60/keymaps/noroadsleft/readme_ch5.md | 12 +- 4 files changed, 330 insertions(+), 305 deletions(-) diff --git a/keyboards/kc60/keymaps/noroadsleft/keymap.c b/keyboards/kc60/keymaps/noroadsleft/keymap.c index ee1f69e914c..98d73535687 100644 --- a/keyboards/kc60/keymaps/noroadsleft/keymap.c +++ b/keyboards/kc60/keymaps/noroadsleft/keymap.c @@ -9,24 +9,24 @@ ** LAYER DEFINITIONS ** **********************/ enum layers_keymap { - // BASE LAYERS - _QWERTY = 0, - _DVORAK, - _COLEMAK, - _MAC, - _QUAKE2, - _QUAKE2_DVORAK, - _QUAKE2_CONSOLE, + // BASE LAYERS + _QWERTY = 0, + _DVORAK, + _COLEMAK, + _MAC, + _QUAKE2, + _QUAKE2_DVORAK, + _QUAKE2_CONSOLE, - // FUNCTION LAYERS - _FUNCWIN, - _FUNCMAC, - _FUNCQ2, + // FUNCTION LAYERS + _FUNCWIN, + _FUNCMAC, + _FUNCQ2, - // OTHER LAYERS - _NUMPAD, - _MACROS, - _SYSTEM + // OTHER LAYERS + _NUMPAD, + _MACROS, + _SYSTEM }; // LAYER SHORT CODES @@ -70,24 +70,24 @@ enum layers_keymap { // MACRO DEFINITIONS enum custom_keycodes { - F_CAPS = SAFE_RANGE, - T_L3DED, - G_PUSH, - G_FTCH, - G_COMM, - G_RST, - G_C10R, - G_BRCH, - SIGNA, - GO_Q2, - Q2_ON, - Q2_OFF, - Q2_ESC, - Q2_GRV, - MC_UNDO, - MC_PSTE, - NUBS_Z, - VRSN + F_CAPS = SAFE_RANGE, + T_L3DED, + G_PUSH, + G_FTCH, + G_COMM, + G_RST, + G_C10R, + G_BRCH, + SIGNA, + GO_Q2, + Q2_ON, + Q2_OFF, + Q2_ESC, + Q2_GRV, + MC_UNDO, + MC_PSTE, + NUBS_Z, + VRSN }; @@ -98,293 +98,314 @@ enum custom_keycodes { bool process_record_user(uint16_t keycode, keyrecord_t *record) { - switch(keycode) { - // these are our macros! - case F_CAPS: - /* - Objective: write a macro that checks the current layers that are - enabled, and activates the appropriate function layer. - */ - if ( biton32(layer_state) == _MAC ) { - if (record->event.pressed) { - layer_on(_FUNCMAC); - } else { - layer_off(_FUNCMAC); - } - } else { - if (record->event.pressed) { - layer_on(_FUNCWIN); - } else { - layer_off(_FUNCWIN); - } - }; - return false; - case T_L3DED: - if (record->event.pressed) { - SEND_STRING("lavak3DED "); - }; - return false; - case G_PUSH: - if (record->event.pressed) { - SEND_STRING("git push origin "); - }; - return false; - case G_FTCH: - if (record->event.pressed) { - if ( get_mods() & MOD_MASK_SHIFT ) { - clear_mods(); - SEND_STRING("git pull upstream "); - } else { - SEND_STRING("git fetch upstream "); - } - }; - return false; - case G_COMM: - if (record->event.pressed) { - SEND_STRING("git commit -m \"\"" SS_TAP(X_LEFT)); - layer_off(_MACROS); - }; - return false; - case G_BRCH: - if (record->event.pressed) { - if ( get_mods() & MOD_MASK_SHIFT ) { - clear_mods(); - SEND_STRING("master"); - } else { - SEND_STRING("$(git branch-name)"); - } - layer_off(_MACROS); - }; - return false; - case SIGNA: - if (record->event.pressed) { - SEND_STRING("\\- @noroadsleft" SS_TAP(X_ENTER)); - layer_off(_MACROS); - }; - return false; - case GO_Q2: - if (record->event.pressed) { - //default_layer_set(_QWERTY); - layer_move(_QWERTY); // TO(_QWERTY); - layer_on(_QUAKE2); - //layer_off(_SYSTEM); - }; - return false; - case Q2_ON: - if (record->event.pressed) { - SEND_STRING(SS_TAP(X_ENTER)); - layer_on(_DVORAK); - layer_on(_QUAKE2_DVORAK); - }; - return false; - case Q2_OFF: - if (record->event.pressed) { - SEND_STRING(SS_TAP(X_ENTER)); - layer_move(_QWERTY); // TO(_QWERTY); - layer_on(_QUAKE2); - }; - return false; - case Q2_ESC: - if (record->event.pressed) { - SEND_STRING(SS_TAP(X_ESCAPE)); - layer_move(_QWERTY); // TO(_QWERTY); - layer_on(_QUAKE2); - }; - return false; - case Q2_GRV: - if (record->event.pressed) { - SEND_STRING(SS_TAP(X_GRAVE)); - layer_on(_DVORAK); - layer_on(_QUAKE2_DVORAK); - layer_on(_QUAKE2_CONSOLE); - }; - return false; - case MC_UNDO: - if (record->event.pressed) { - if ( get_mods() & MOD_MASK_SHIFT ) { - SEND_STRING( SS_DOWN(X_LSHIFT) SS_DOWN(X_LGUI) SS_TAP(X_Z) SS_UP(X_LGUI) SS_UP(X_LSHIFT) ); - } else { - SEND_STRING( SS_DOWN(X_LGUI) SS_TAP(X_Z) SS_UP(X_LGUI) ); - } - }; - return false; - case MC_PSTE: - if (record->event.pressed) { - if ( get_mods() & MOD_MASK_SHIFT ) { - SEND_STRING( SS_DOWN(X_LSHIFT) SS_DOWN(X_LGUI) SS_DOWN(X_LALT) SS_TAP(X_V) SS_UP(X_LALT) SS_UP(X_LGUI) SS_UP(X_LSHIFT) ); - } else { - SEND_STRING( SS_DOWN(X_LGUI) SS_TAP(X_V) SS_UP(X_LGUI) ); - } - }; - return false; - case NUBS_Z: - if (record->event.pressed) { - if ( get_mods() & MOD_MASK_RALT ) { - SEND_STRING( SS_TAP(X_NONUS_BSLASH) ); - } else { - SEND_STRING( SS_TAP(X_Z) ); - } - }; - return false; - case VRSN: - if (record->event.pressed) { - SEND_STRING( QMK_KEYBOARD "/" QMK_KEYMAP " @ " QMK_VERSION ); - } - return false; - } // switch() - return true; + switch(keycode) { + // these are our macros! + case F_CAPS: + /* + * Objective: write a macro that checks the current layers that are + * enabled, and activates the appropriate function layer. + */ + if ( biton32(layer_state) == _MAC ) { + if (record->event.pressed) { + layer_on(_FUNCMAC); + } else { + layer_off(_FUNCMAC); + } + } else { + if (record->event.pressed) { + layer_on(_FUNCWIN); + } else { + layer_off(_FUNCWIN); + } + }; + return false; + case T_L3DED: + if (record->event.pressed) { + SEND_STRING("lavak3DED "); + }; + return false; + case G_PUSH: + if (record->event.pressed) { + SEND_STRING("git push origin "); + }; + return false; + case G_FTCH: + if (record->event.pressed) { + if ( get_mods() & MOD_MASK_SHIFT ) { + clear_mods(); + SEND_STRING("git pull upstream "); + } else { + SEND_STRING("git fetch upstream "); + } + }; + return false; + case G_COMM: + if (record->event.pressed) { + SEND_STRING("git commit -m \"\"" SS_TAP(X_LEFT)); + layer_off(_MACROS); + }; + return false; + case G_BRCH: + if (record->event.pressed) { + if ( get_mods() & MOD_MASK_SHIFT ) { + clear_mods(); + SEND_STRING("master"); + } else { + SEND_STRING("$(git branch-name)"); + } + layer_off(_MACROS); + }; + return false; + case SIGNA: + if (record->event.pressed) { + SEND_STRING("\\- @noroadsleft" SS_TAP(X_ENTER)); + layer_off(_MACROS); + }; + return false; + case GO_Q2: + if (record->event.pressed) { + //default_layer_set(_QWERTY); + layer_move(_QWERTY); // TO(_QWERTY); + layer_on(_QUAKE2); + //layer_off(_SYSTEM); + }; + return false; + case Q2_ON: + if (record->event.pressed) { + SEND_STRING(SS_TAP(X_ENTER)); + layer_on(_DVORAK); + layer_on(_QUAKE2_DVORAK); + }; + return false; + case Q2_OFF: + if (record->event.pressed) { + SEND_STRING(SS_TAP(X_ENTER)); + layer_move(_QWERTY); // TO(_QWERTY); + layer_on(_QUAKE2); + }; + return false; + case Q2_ESC: + if (record->event.pressed) { + SEND_STRING(SS_TAP(X_ESCAPE)); + layer_move(_QWERTY); // TO(_QWERTY); + layer_on(_QUAKE2); + }; + return false; + case Q2_GRV: + if (record->event.pressed) { + SEND_STRING(SS_TAP(X_GRAVE)); + layer_on(_DVORAK); + layer_on(_QUAKE2_DVORAK); + layer_on(_QUAKE2_CONSOLE); + }; + return false; + case MC_UNDO: + if (record->event.pressed) { + if ( get_mods() & MOD_MASK_SHIFT ) { + SEND_STRING( SS_DOWN(X_LSHIFT) SS_DOWN(X_LGUI) SS_TAP(X_Z) SS_UP(X_LGUI) SS_UP(X_LSHIFT) ); + } else { + SEND_STRING( SS_DOWN(X_LGUI) SS_TAP(X_Z) SS_UP(X_LGUI) ); + } + }; + return false; + case MC_PSTE: + if (record->event.pressed) { + if ( get_mods() & MOD_MASK_SHIFT ) { + SEND_STRING( SS_DOWN(X_LSHIFT) SS_DOWN(X_LGUI) SS_DOWN(X_LALT) SS_TAP(X_V) SS_UP(X_LALT) SS_UP(X_LGUI) SS_UP(X_LSHIFT) ); + } else { + SEND_STRING( SS_DOWN(X_LGUI) SS_TAP(X_V) SS_UP(X_LGUI) ); + } + }; + return false; + case NUBS_Z: + if (record->event.pressed) { + if ( get_mods() & MOD_MASK_RALT ) { + SEND_STRING( SS_DOWN(X_NONUS_BSLASH) ); + } else { + SEND_STRING( SS_DOWN(X_Z) ); + } + } else { + if ( get_mods() & MOD_MASK_RALT ) { + SEND_STRING( SS_UP(X_NONUS_BSLASH) ); + } else { + SEND_STRING( SS_UP(X_Z) ); + } + }; + return false; + case VRSN: + if (record->event.pressed) { + SEND_STRING( QMK_KEYBOARD "/" QMK_KEYMAP " @ " QMK_VERSION ); + } + return false; + case KC_1 ... KC_0: + if (record->event.pressed) { + if ( get_mods() & MOD_MASK_RALT ) { + register_code( keycode + 0x3b ); + } else { + register_code( keycode ); + } + } else { + if ( get_mods() & MOD_MASK_RALT ) { + unregister_code( keycode + 0x3b ); + } else { + unregister_code( keycode ); + } + } + return false; + } // switch() + return true; }; // KEYMAPS const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - /**************** - ** BASE LAYERS ** - ****************/ + /**************** + ** BASE LAYERS ** + ****************/ - /* QWERTY */ - [_QWERTY] = LAYOUT_60_ansi( - // 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 - KC_GESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, \ - KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, \ - FW_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, \ - KC_LSFT, NUBS_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, \ - KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RGUI, MO(_FW), KC_RCTL \ - ), + /* QWERTY */ + [_QWERTY] = LAYOUT_60_ansi( + // 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 + KC_GESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, \ + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, \ + FW_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, \ + KC_LSFT, NUBS_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, \ + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RGUI, MO(_FW), KC_RCTL \ + ), - /* Dvorak */ - [_DVORAK] = LAYOUT_60_ansi( - // 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 - KC_GESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_LBRC, KC_RBRC, KC_BSPC, \ - KC_TAB, KC_QUOT, KC_COMM, KC_DOT, KC_P, KC_Y, KC_F, KC_G, KC_C, KC_R, KC_L, KC_SLSH, KC_EQL, KC_BSLS, \ - FW_CAPS, KC_A, KC_O, KC_E, KC_U, KC_I, KC_D, KC_H, KC_T, KC_N, KC_S, KC_MINS, KC_ENT, \ - KC_LSFT, KC_SCLN, KC_Q, KC_J, KC_K, KC_X, KC_B, KC_M, KC_W, KC_V, KC_Z, KC_RSFT, \ - KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RGUI, MO(_FW), KC_RCTL \ - ), + /* Dvorak */ + [_DVORAK] = LAYOUT_60_ansi( + // 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 + KC_GESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_LBRC, KC_RBRC, KC_BSPC, \ + KC_TAB, KC_QUOT, KC_COMM, KC_DOT, KC_P, KC_Y, KC_F, KC_G, KC_C, KC_R, KC_L, KC_SLSH, KC_EQL, KC_BSLS, \ + FW_CAPS, KC_A, KC_O, KC_E, KC_U, KC_I, KC_D, KC_H, KC_T, KC_N, KC_S, KC_MINS, KC_ENT, \ + KC_LSFT, KC_SCLN, KC_Q, KC_J, KC_K, KC_X, KC_B, KC_M, KC_W, KC_V, KC_Z, KC_RSFT, \ + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RGUI, MO(_FW), KC_RCTL \ + ), - /* Colemak */ - [_COLEMAK] = LAYOUT_60_ansi( - // 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 - KC_GESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, \ - KC_TAB, KC_Q, KC_W, KC_F, KC_P, KC_G, KC_J, KC_L, KC_U, KC_Y, KC_SCLN, KC_LBRC, KC_RBRC, KC_BSLS, \ - FW_CAPS, KC_A, KC_R, KC_S, KC_T, KC_D, KC_H, KC_N, KC_E, KC_I, KC_O, KC_QUOT, KC_ENT, \ - KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_K, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, \ - KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RGUI, MO(_FW), KC_RCTL \ - ), + /* Colemak */ + [_COLEMAK] = LAYOUT_60_ansi( + // 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 + KC_GESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, \ + KC_TAB, KC_Q, KC_W, KC_F, KC_P, KC_G, KC_J, KC_L, KC_U, KC_Y, KC_SCLN, KC_LBRC, KC_RBRC, KC_BSLS, \ + FW_CAPS, KC_A, KC_R, KC_S, KC_T, KC_D, KC_H, KC_N, KC_E, KC_I, KC_O, KC_QUOT, KC_ENT, \ + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_K, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, \ + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RGUI, MO(_FW), KC_RCTL \ + ), - /**************** - ** OS OVERLAYS ** - ****************/ + /**************** + ** OS OVERLAYS ** + ****************/ - /* Mac */ - [_MAC] = LAYOUT_60_ansi( - // 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ - FM_CAPS, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ - _______, _______, _______, _______, _______, _______, MO(_FM), _______ \ - ), + /* Mac */ + [_MAC] = LAYOUT_60_ansi( + // 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ + FM_CAPS, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ + _______, _______, _______, _______, _______, _______, MO(_FM), _______ \ + ), - /********************* - ** QUAKE 2 OVERLAYS ** - *********************/ + /********************* + ** QUAKE 2 OVERLAYS ** + *********************/ - /* Quake 2 */ - [_QUAKE2] = LAYOUT_60_ansi( - // 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ - Q2_CAPS, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, Q2_ON, \ - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ - _______, _______, _______, _______, _______, _______, MO(_FQ), _______ \ - ), + /* Quake 2 */ + [_QUAKE2] = LAYOUT_60_ansi( + // 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ + Q2_CAPS, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, Q2_ON, \ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ + _______, _______, _______, _______, _______, _______, MO(_FQ), _______ \ + ), - [_QUAKE2_DVORAK] = LAYOUT_60_ansi( - // 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 - Q2_ESC, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ - Q2_CAPS, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, Q2_OFF, \ - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ - _______, _______, _______, _______, _______, _______, MO(_FQ), _______ \ - ), + [_QUAKE2_DVORAK] = LAYOUT_60_ansi( + // 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 + Q2_ESC, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ + Q2_CAPS, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, Q2_OFF, \ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ + _______, _______, _______, _______, _______, _______, MO(_FQ), _______ \ + ), - [_QUAKE2_CONSOLE] = LAYOUT_60_ansi( - // 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 - Q2_ESC, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ - Q2_CAPS, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_ENT, \ - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ - _______, _______, _______, _______, _______, _______, MO(_FQ), _______ \ - ), + [_QUAKE2_CONSOLE] = LAYOUT_60_ansi( + // 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 + Q2_ESC, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ + Q2_CAPS, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_ENT, \ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ + _______, _______, _______, _______, _______, _______, MO(_FQ), _______ \ + ), - /******************** - ** FUNCTION LAYERS ** - ********************/ + /******************** + ** FUNCTION LAYERS ** + ********************/ - /* Windows Fn layer */ - [_FUNCWIN] = LAYOUT_60_ansi( - // 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 - KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, \ - _______, KC_CALC, KC_APP, _______, _______, _______, KC_INS, KC_HOME, KC_UP, KC_END, KC_PGUP, KC_PSCR, KC_SLCK, KC_PAUS, \ - NO_CHNG, WN_SALL, _______, _______, _______, _______, KC_DEL, KC_LEFT, KC_DOWN, KC_RGHT, KC_PGDN, _______, KC_PENT, \ - _______, WN_UNDO, WN_CUT, WN_COPY, WN_PSTE, _______, _______, KC_MUTE, KC_VOLD, KC_VOLU, TG(_SY), _______, \ - _______, _______, _______, TG(_NP), _______, TG(_MA), NO_CHNG, _______ \ - ), + /* Windows Fn layer */ + [_FUNCWIN] = LAYOUT_60_ansi( + // 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 + KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, \ + _______, KC_CALC, KC_APP, _______, _______, _______, KC_INS, KC_HOME, KC_UP, KC_END, KC_PGUP, KC_PSCR, KC_SLCK, KC_PAUS, \ + NO_CHNG, WN_SALL, _______, _______, _______, _______, KC_DEL, KC_LEFT, KC_DOWN, KC_RGHT, KC_PGDN, _______, KC_PENT, \ + _______, WN_UNDO, WN_CUT, WN_COPY, WN_PSTE, _______, _______, KC_MUTE, KC_VOLD, KC_VOLU, TG(_SY), _______, \ + _______, _______, _______, TG(_NP), _______, TG(_MA), NO_CHNG, _______ \ + ), - /* MacOS Fn layer */ - [_FUNCMAC] = LAYOUT_60_ansi( - // 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 - KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, \ - _______, _______, _______, _______, _______, _______, KC_INS, MC_HOME, KC_UP, MC_END, KC_PGUP, MC_PSCR, _______, _______, \ - NO_CHNG, MC_SALL, _______, _______, _______, _______, KC_DEL, KC_LEFT, KC_DOWN, KC_RGHT, KC_PGDN, _______, _______, \ - _______, MC_UNDO, MC_CUT, MC_COPY, MC_PSTE, _______, _______, _______, _______, _______, TG(_SY), _______, \ - _______, _______, _______, TG(_NP), _______, _______, NO_CHNG, _______ \ - ), + /* MacOS Fn layer */ + [_FUNCMAC] = LAYOUT_60_ansi( + // 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 + KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, \ + _______, _______, _______, _______, _______, _______, KC_INS, MC_HOME, KC_UP, MC_END, KC_PGUP, MC_PSCR, _______, _______, \ + NO_CHNG, MC_SALL, _______, _______, _______, _______, KC_DEL, KC_LEFT, KC_DOWN, KC_RGHT, KC_PGDN, _______, _______, \ + _______, MC_UNDO, MC_CUT, MC_COPY, MC_PSTE, _______, _______, _______, _______, _______, TG(_SY), _______, \ + _______, _______, _______, TG(_NP), _______, _______, NO_CHNG, _______ \ + ), - /* Quake 2 Fn layer */ - [_FUNCQ2] = LAYOUT_60_ansi( - // 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 - Q2_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, \ - _______, _______, _______, _______, _______, _______, KC_INS, KC_HOME, KC_UP, KC_END, KC_PGUP, KC_PSCR, KC_SLCK, KC_PAUS, \ - NO_CHNG, _______, _______, _______, _______, _______, KC_DEL, KC_LEFT, KC_DOWN, KC_RGHT, KC_PGDN, _______, KC_ENT, \ - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, TG(_SY), _______, \ - _______, _______, _______, _______, _______, _______, NO_CHNG, _______ \ - ), + /* Quake 2 Fn layer */ + [_FUNCQ2] = LAYOUT_60_ansi( + // 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 + Q2_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, \ + _______, _______, _______, _______, _______, _______, KC_INS, KC_HOME, KC_UP, KC_END, KC_PGUP, KC_PSCR, KC_SLCK, KC_PAUS, \ + NO_CHNG, _______, _______, _______, _______, _______, KC_DEL, KC_LEFT, KC_DOWN, KC_RGHT, KC_PGDN, _______, KC_ENT, \ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, TG(_SY), _______, \ + _______, _______, _______, _______, _______, _______, NO_CHNG, _______ \ + ), - /***************** - ** OTHER LAYERS ** - *****************/ + /***************** + ** OTHER LAYERS ** + *****************/ - /* Numpad layer */ - [_NUMPAD] = LAYOUT_60_ansi( - // 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 - _______, _______, _______, _______, _______, _______, _______, KC_P7, KC_P8, KC_P9, _______, _______, _______, _______, \ - _______, _______, _______, _______, KC_E, KC_F, _______, KC_P4, KC_P5, KC_P6, KC_PAST, KC_PSLS, KC_PEQL, _______, \ - _______, _______, _______, _______, KC_C, KC_D, _______, KC_P1, KC_P2, KC_P3, KC_PPLS, KC_PMNS, KC_PENT, \ - _______, _______, _______, _______, KC_A, KC_B, _______, KC_P0, _______, KC_PDOT, _______, _______, \ - _______, _______, _______, TG(_NP), _______, _______, NO_CHNG, _______ \ - ), + /* Numpad layer */ + [_NUMPAD] = LAYOUT_60_ansi( + // 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 + _______, _______, _______, _______, _______, _______, _______, KC_P7, KC_P8, KC_P9, _______, _______, _______, _______, \ + _______, _______, _______, _______, KC_E, KC_F, _______, KC_P4, KC_P5, KC_P6, KC_PAST, KC_PSLS, KC_PEQL, _______, \ + _______, _______, _______, _______, KC_C, KC_D, _______, KC_P1, KC_P2, KC_P3, KC_PPLS, KC_PMNS, KC_PENT, \ + _______, _______, _______, _______, KC_A, KC_B, _______, KC_P0, _______, KC_PDOT, _______, _______, \ + _______, _______, _______, TG(_NP), _______, _______, NO_CHNG, _______ \ + ), - /* Macro layer */ - [_MACROS] = LAYOUT_60_ansi( - // 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 - TG(_MA), _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ - _______, _______, _______, G_PUSH, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ - _______, _______, _______, G_FTCH, G_COMM, _______, _______, _______, _______, T_L3DED, _______, _______, _______, \ - _______, _______, _______, _______, _______, G_BRCH, SIGNA, _______, _______, _______, _______, _______, \ - _______, _______, _______, _______, _______, _______, NO_CHNG, _______ \ - ), + /* Macro layer */ + [_MACROS] = LAYOUT_60_ansi( + // 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 + TG(_MA), _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ + _______, _______, _______, G_PUSH, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ + _______, _______, _______, G_FTCH, G_COMM, _______, _______, _______, _______, T_L3DED, _______, _______, _______, \ + _______, _______, _______, _______, _______, G_BRCH, SIGNA, _______, _______, _______, _______, _______, \ + _______, _______, _______, _______, _______, _______, NO_CHNG, _______ \ + ), - /* System layer */ - [_SYSTEM] = LAYOUT_60_ansi( - // 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 - TG(_SY), TO(_QW), TO(_DV), TO(_CM), GO_Q2, XXXXXXX, XXXXXXX, XXXXXXX, RESET, XXXXXXX, DEBUG, XXXXXXX, VRSN, XXXXXXX, \ - XXXXXXX, XXXXXXX, TG(_MC), XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, \ - XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, \ - XXXXXXX, XXXXXXX, XXXXXXX, BL_DEC, BL_TOGG, BL_INC, BL_BRTG, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, \ - XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, NO_CHNG, XXXXXXX \ - ), + /* System layer */ + [_SYSTEM] = LAYOUT_60_ansi( + // 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 + TG(_SY), TO(_QW), TO(_DV), TO(_CM), GO_Q2, XXXXXXX, XXXXXXX, XXXXXXX, RESET, XXXXXXX, DEBUG, XXXXXXX, VRSN, XXXXXXX, \ + XXXXXXX, XXXXXXX, TG(_MC), XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, \ + XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, \ + XXXXXXX, XXXXXXX, XXXXXXX, BL_DEC, BL_TOGG, BL_INC, BL_BRTG, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, \ + XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, NO_CHNG, XXXXXXX \ + ), }; diff --git a/keyboards/kc60/keymaps/noroadsleft/readme.md b/keyboards/kc60/keymaps/noroadsleft/readme.md index 59fbfd246a4..c9db4f8de20 100644 --- a/keyboards/kc60/keymaps/noroadsleft/readme.md +++ b/keyboards/kc60/keymaps/noroadsleft/readme.md @@ -1,6 +1,6 @@ # @noroadsleft's KC60 keymap -### Last updated: February 14, 2019, 3:50 AM UTC-0800 +### Last updated: April 7, 2019, 2:26 AM UTC-0700 ![](https://i.imgur.com/tzhXQYI.jpg) diff --git a/keyboards/kc60/keymaps/noroadsleft/readme_ch3.md b/keyboards/kc60/keymaps/noroadsleft/readme_ch3.md index ebcb3cca860..b9dc556e4e3 100644 --- a/keyboards/kc60/keymaps/noroadsleft/readme_ch3.md +++ b/keyboards/kc60/keymaps/noroadsleft/readme_ch3.md @@ -16,7 +16,7 @@ These layers were born out of the confusion I have had trying to use the in-game chat and the console in [Quake 2](https://en.wikipedia.org/wiki/Quake_II). When Quake 2 came out, alternate keyboard layouts weren't really a thing. As a result, all in-game text input is hard-locked to US QWERTY, regardless of what the operating system is using for its input method. -I'm attempting to solve this by some creative use of QMK's macro feature. The keycode in the System layer that enables these layers, [`GO_Q2`](./keymap.c#L383), is a [macro](./keymap.c#L165-172) that sets the default layer to the QWERTY layer, then turns the Quake 2 layer `_Q2` on. The result is a partially-overwritten QWERTY layer, that has some keycodes with some creative layer switching. +I'm attempting to solve this by some creative use of QMK's macro feature. The keycode in the System layer that enables these layers, [`GO_Q2`](./keymap.c#L404), is a [macro](./keymap.c#L165-L172) that sets the default layer to the QWERTY layer, then turns the Quake 2 layer `_Q2` on. The result is a partially-overwritten QWERTY layer, that has some keycodes with some creative layer switching. When I hit the `Enter` key (bound in-game to text chat), the [macro keycode](./keymap.c#L173-L179) I've created sends the keycode for `Enter`, then follows with enabling the Hardware Dvorak layer and its corresponding overlay. Now the game is in text chat mode, and my keyboard is in Dvorak. When I hit `Enter` again, another `Enter` [keycode macro](./keymap.c#L180-L186) is sent, which sends the message, then the macro brings me back to the standard QWERTY+Quake 2 setup. Hitting `Escape` instead runs a [macro](./keymap.c#L187-L193) that cancels the sending of the message, and undoes the layers. diff --git a/keyboards/kc60/keymaps/noroadsleft/readme_ch5.md b/keyboards/kc60/keymaps/noroadsleft/readme_ch5.md index e5ee7cbdeb8..a65b3acbeb4 100644 --- a/keyboards/kc60/keymaps/noroadsleft/readme_ch5.md +++ b/keyboards/kc60/keymaps/noroadsleft/readme_ch5.md @@ -60,7 +60,7 @@ Output: `git commit -m ""` Left Readies a `git commit` command, moves the cursor between the quotation marks, then disables the Macro layer. -#### [G_BRCH](./keymap.c#L148-158) +#### [G_BRCH](./keymap.c#L148-L158) | Condition | Output | | :-------- | :----- | @@ -93,7 +93,7 @@ An Undo shortcut that turns to Redo if Shift is being held. I'm not s The program I use this in uses Shift + Command + Option + V to paste while maintaining formatting (typeface, text size, etc.). Sometimes I want this and sometimes I don't. Using Shift changes the behavior. -#### [NUBS_Z](./keymap.c#L220-L228) +#### [NUBS_Z](./keymap.c#L220-L234) | Condition | Output | | :-------- | :----- | @@ -102,11 +102,15 @@ The program I use this in uses Shift + Command + Opti Sometimes I type in languages from countries that use ISO layout, but my keyboard is ANSI, so I have one key fewer. This macro simulates the Non-US Backslash key if I use Right Alt + Z. -#### [VRSN](./keymap.c#L229-L233) +#### [VRSN](./keymap.c#L235-L239) Outputs a string that tells me the Git commit from which my flashed firmware was built. Looks something like: - kc60/noroadsleft @ 0.6.240-20-ge91549-dirty + kc60/noroadsleft @ 0.6.326-6-gae6d7b-dirty + +#### [Emulated Numeric Keypad](./keymap.c#L240-L254) + +If I hold the Right Alt key, the number row (`KC_1` through `KC_0`) will output numpad keycodes instead of number row keycodes, enabling quicker access to characters like ™ and °. ---- From a8e3462b4bd5706f17f460e36b88b4063ef148f6 Mon Sep 17 00:00:00 2001 From: MechMerlin <30334081+mechmerlin@users.noreply.github.com> Date: Sun, 7 Apr 2019 07:34:01 -0700 Subject: [PATCH 048/171] [Keyboard] Refactor budget96 to remove custom i2c code in favor of QMK i2c_master (#5571) * remove custom i2c code in favor of QMK i2c_master * fix readme * disable bootmagic as it doesn't work on bmc boards --- keyboards/donutcables/budget96/budget96.c | 4 +- keyboards/donutcables/budget96/config.h | 6 -- keyboards/donutcables/budget96/i2c.c | 106 ---------------------- keyboards/donutcables/budget96/i2c.h | 24 ----- keyboards/donutcables/budget96/readme.md | 4 +- keyboards/donutcables/budget96/rules.mk | 4 +- 6 files changed, 6 insertions(+), 142 deletions(-) delete mode 100644 keyboards/donutcables/budget96/i2c.c delete mode 100644 keyboards/donutcables/budget96/i2c.h diff --git a/keyboards/donutcables/budget96/budget96.c b/keyboards/donutcables/budget96/budget96.c index 966dd4c1299..7831a91f523 100644 --- a/keyboards/donutcables/budget96/budget96.c +++ b/keyboards/donutcables/budget96/budget96.c @@ -25,7 +25,7 @@ #include #include "action_layer.h" -#include "i2c.h" +#include "i2c_master.h" #include "quantum.h" __attribute__ ((weak)) @@ -45,7 +45,7 @@ void rgblight_set(void) { } i2c_init(); - i2c_send(0xb0, (uint8_t*)led, 3 * RGBLED_NUM); + i2c_transmit(0xb0, (uint8_t*)led, 3 * RGBLED_NUM, 100); } #endif diff --git a/keyboards/donutcables/budget96/config.h b/keyboards/donutcables/budget96/config.h index 369cbdd07b7..74661d828cd 100644 --- a/keyboards/donutcables/budget96/config.h +++ b/keyboards/donutcables/budget96/config.h @@ -39,9 +39,3 @@ along with this program. If not, see . #define NO_BACKLIGHT_CLOCK #define BACKLIGHT_LEVELS 1 #define RGBLIGHT_ANIMATIONS - -// Set bootmagic lite key to the key commonly programmed as Esc. -#define BOOTMAGIC_LITE_ROW 5 -#define BOOTMAGIC_LITE_COLUMN 0 - -/* key combination for command */ diff --git a/keyboards/donutcables/budget96/i2c.c b/keyboards/donutcables/budget96/i2c.c deleted file mode 100644 index e8c4455ad1b..00000000000 --- a/keyboards/donutcables/budget96/i2c.c +++ /dev/null @@ -1,106 +0,0 @@ -/* -Copyright 2016 Luiz Ribeiro - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see . -*/ - -// Please do not modify this file - -#include -#include - -#include "i2c.h" - -void i2c_set_bitrate(uint16_t bitrate_khz) { - uint8_t bitrate_div = ((F_CPU / 1000l) / bitrate_khz); - if (bitrate_div >= 16) { - bitrate_div = (bitrate_div - 16) / 2; - } - TWBR = bitrate_div; -} - -void i2c_init(void) { - // set pull-up resistors on I2C bus pins - PORTC |= 0b11; - - i2c_set_bitrate(400); - - // enable TWI (two-wire interface) - TWCR |= (1 << TWEN); - - // enable TWI interrupt and slave address ACK - TWCR |= (1 << TWIE); - TWCR |= (1 << TWEA); -} - -uint8_t i2c_start(uint8_t address) { - // reset TWI control register - TWCR = 0; - - // begin transmission and wait for it to end - TWCR = (1< - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see . -*/ - -// Please do not modify this file - -#pragma once - -void i2c_init(void); -void i2c_set_bitrate(uint16_t bitrate_khz); -uint8_t i2c_send(uint8_t address, uint8_t *data, uint16_t length); diff --git a/keyboards/donutcables/budget96/readme.md b/keyboards/donutcables/budget96/readme.md index e44b9a3e72f..70e4d3afba7 100644 --- a/keyboards/donutcables/budget96/readme.md +++ b/keyboards/donutcables/budget96/readme.md @@ -12,7 +12,7 @@ Make example for this keyboard (after setting up your build environment): Flashing -**Reset Key:** Hold down the key located at `K00`, commonly programmed as left control while plugging in the keyboard. You may also hold down the key located at `K50`, commonly programmed as the `Esc` key. +**Reset Key:** Hold down the key located at `K00`, commonly programmed as left control while plugging in the keyboard. ps2avr(GB) boards use an atmega32a microcontroller and a different bootloader. It is not flashable using the regular QMK methods. @@ -34,7 +34,7 @@ macOS: ``` 3. Install the following packages: ``` - brew install python + brew install python3 pip3 install pyusb brew install --HEAD https://raw.githubusercontent.com/robertgzr/homebrew-tap/master/bootloadhid.rb diff --git a/keyboards/donutcables/budget96/rules.mk b/keyboards/donutcables/budget96/rules.mk index e25b037279d..67697ac7333 100644 --- a/keyboards/donutcables/budget96/rules.mk +++ b/keyboards/donutcables/budget96/rules.mk @@ -31,7 +31,7 @@ F_CPU = 12000000 BOOTLOADER = bootloadHID # build options -BOOTMAGIC_ENABLE = lite +BOOTMAGIC_ENABLE = no MOUSEKEY_ENABLE = yes EXTRAKEY_ENABLE = yes CONSOLE_ENABLE = yes @@ -43,7 +43,7 @@ RGBLIGHT_CUSTOM_DRIVER = yes OPT_DEFS = -DDEBUG_LEVEL=0 # custom matrix setup -SRC = i2c.c +SRC = i2c_master.c # programming options PROGRAM_CMD = ./util/atmega32a_program.py $(TARGET).hex From b262f20ad48be429848467074edcf62536d4d3e5 Mon Sep 17 00:00:00 2001 From: MechMerlin <30334081+mechmerlin@users.noreply.github.com> Date: Sun, 7 Apr 2019 07:34:31 -0700 Subject: [PATCH 049/171] [Keyboard] Refactor HB85 to get rid of custom i2c code (#5570) * remove dependency on custom i2c code * missed a pragma once * fix readme install instructions * config.h cleanup * make the bootmagic key not the same bmc reset key * disable bootmagic functionality as it doesn't seem to work on atmega32a bmc boards --- keyboards/gray_studio/hb85/config.h | 5 -- keyboards/gray_studio/hb85/hb85.c | 6 +- keyboards/gray_studio/hb85/i2c.c | 106 ------------------------- keyboards/gray_studio/hb85/i2c.h | 27 ------- keyboards/gray_studio/hb85/readme.md | 8 +- keyboards/gray_studio/hb85/rules.mk | 4 +- keyboards/gray_studio/hb85/usbconfig.h | 5 +- 7 files changed, 10 insertions(+), 151 deletions(-) delete mode 100644 keyboards/gray_studio/hb85/i2c.c delete mode 100644 keyboards/gray_studio/hb85/i2c.h diff --git a/keyboards/gray_studio/hb85/config.h b/keyboards/gray_studio/hb85/config.h index d68860d2028..da230f7e8d5 100644 --- a/keyboards/gray_studio/hb85/config.h +++ b/keyboards/gray_studio/hb85/config.h @@ -19,8 +19,6 @@ along with this program. If not, see . #define VENDOR_ID 0x20A0 #define PRODUCT_ID 0x422F -// TODO: share these strings with usbconfig.h -// Edit usbconfig.h to change these. #define MANUFACTURER Gray Studio #define PRODUCT HB85 @@ -34,6 +32,3 @@ along with this program. If not, see . #define RGBLED_NUM 5 #define RGBLIGHT_ANIMATIONS - -#define NO_UART 1 -#define BOOTLOADHID_BOOTLOADER 1 diff --git a/keyboards/gray_studio/hb85/hb85.c b/keyboards/gray_studio/hb85/hb85.c index 620a1817aa4..3e420235878 100644 --- a/keyboards/gray_studio/hb85/hb85.c +++ b/keyboards/gray_studio/hb85/hb85.c @@ -1,5 +1,5 @@ /* -Copyright 2017 Luiz Ribeiro , +Copyright 2017 Luiz Ribeiro , 2019 fcoury This program is free software: you can redistribute it and/or modify @@ -20,7 +20,7 @@ along with this program. If not, see . #include "rgblight.h" -#include "i2c.h" +#include "i2c_master.h" #include "quantum.h" #ifdef RGBLIGHT_ENABLE @@ -36,7 +36,7 @@ void rgblight_set(void) { } i2c_init(); - i2c_send(0xb0, (uint8_t*)led, 3 * RGBLED_NUM); + i2c_transmit(0xb0, (uint8_t*)led, 3 * RGBLED_NUM, 100); } #endif diff --git a/keyboards/gray_studio/hb85/i2c.c b/keyboards/gray_studio/hb85/i2c.c deleted file mode 100644 index a4f95213524..00000000000 --- a/keyboards/gray_studio/hb85/i2c.c +++ /dev/null @@ -1,106 +0,0 @@ -/* -Copyright 2016 Luiz Ribeiro - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see . -*/ - -// Please do not modify this file - -#include -#include - -#include "i2c.h" - -void i2c_set_bitrate(uint16_t bitrate_khz) { - uint8_t bitrate_div = ((F_CPU / 1000l) / bitrate_khz); - if (bitrate_div >= 16) { - bitrate_div = (bitrate_div - 16) / 2; - } - TWBR = bitrate_div; -} - -void i2c_init(void) { - // set pull-up resistors on I2C bus pins - PORTC |= 0b11; - - i2c_set_bitrate(400); - - // enable TWI (two-wire interface) - TWCR |= (1 << TWEN); - - // enable TWI interrupt and slave address ACK - TWCR |= (1 << TWIE); - TWCR |= (1 << TWEA); -} - -uint8_t i2c_start(uint8_t address) { - // reset TWI control register - TWCR = 0; - - // begin transmission and wait for it to end - TWCR = (1< - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see . -*/ - -// Please do not modify this file - -#ifndef __I2C_H__ -#define __I2C_H__ - -void i2c_init(void); -void i2c_set_bitrate(uint16_t bitrate_khz); -uint8_t i2c_send(uint8_t address, uint8_t *data, uint16_t length); - -#endif diff --git a/keyboards/gray_studio/hb85/readme.md b/keyboards/gray_studio/hb85/readme.md index 90b4e958c59..c0c2fdf3710 100644 --- a/keyboards/gray_studio/hb85/readme.md +++ b/keyboards/gray_studio/hb85/readme.md @@ -16,7 +16,7 @@ Flashing ps2avr(GB) boards use an atmega32a microcontroller and a different bootloader. It is not flashable using the regular QMK methods. -**Reset Key:** To put the HB85 into reset, hold F3 (`K00`) while plugging in. +**Reset Key:** Hold down the key located at `K00`, commonly programmed as F3 while plugging in the keyboard. Windows: 1. Download [HIDBootFlash](http://vusb.wikidot.com/project:hidbootflash). @@ -36,13 +36,13 @@ macOS: ``` 3. Install the following packages: ``` - brew install python + brew install python3 pip3 install pyusb - brew install --HEAD`https://raw.githubusercontent.com/robertgzr/homebrew-tap/master/bootloadhid.rb + brew install --HEAD https://raw.githubusercontent.com/robertgzr/homebrew-tap/master/bootloadhid.rb 4. Place your keyboard into reset. 5. Flash the board by typing `bootloadHID -r` followed by the path to your `.hex` file. **Please Note:** You will need to use the `EEP_RST` keycode first, followed by unplugging/replugging the board to get RGB underglow effects to work. -See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). \ No newline at end of file +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/gray_studio/hb85/rules.mk b/keyboards/gray_studio/hb85/rules.mk index 682b9cbac56..c3e17e4932d 100644 --- a/keyboards/gray_studio/hb85/rules.mk +++ b/keyboards/gray_studio/hb85/rules.mk @@ -31,7 +31,7 @@ F_CPU = 12000000 BOOTLOADER = bootloadHID # build options -BOOTMAGIC_ENABLE = lite +BOOTMAGIC_ENABLE = no MOUSEKEY_ENABLE = no EXTRAKEY_ENABLE = yes CONSOLE_ENABLE = yes @@ -42,7 +42,7 @@ RGBLIGHT_CUSTOM_DRIVER = yes OPT_DEFS = -DDEBUG_LEVEL=0 -SRC += i2c.c +SRC += i2c_master.c # programming options PROGRAM_CMD = ./util/atmega32a_program.py $(TARGET).hex diff --git a/keyboards/gray_studio/hb85/usbconfig.h b/keyboards/gray_studio/hb85/usbconfig.h index 3d5aaa7708d..c52c90ce8a5 100644 --- a/keyboards/gray_studio/hb85/usbconfig.h +++ b/keyboards/gray_studio/hb85/usbconfig.h @@ -8,8 +8,7 @@ * This Revision: $Id: usbconfig-prototype.h 785 2010-05-30 17:57:07Z cs $ */ -#ifndef __usbconfig_h_included__ -#define __usbconfig_h_included__ +#pragma once #include "config.h" @@ -392,5 +391,3 @@ section at the end of this file). /* #define USB_INTR_PENDING EIFR */ #define USB_INTR_PENDING_BIT INTF1 #define USB_INTR_VECTOR INT1_vect - -#endif /* __usbconfig_h_included__ */ From 9a701632c49518196008145b9e38c9f959e0d2d2 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Konstantin=20=C4=90or=C4=91evi=C4=87?= Date: Sun, 7 Apr 2019 16:40:09 +0200 Subject: [PATCH 050/171] [Keyboard] Remove unnecessary IS_COMMAND definition in treadstone48 (#5566) --- keyboards/treadstone48/rev1/config.h | 5 ----- 1 file changed, 5 deletions(-) diff --git a/keyboards/treadstone48/rev1/config.h b/keyboards/treadstone48/rev1/config.h index aa6dd9e6349..d8ecf170ddd 100644 --- a/keyboards/treadstone48/rev1/config.h +++ b/keyboards/treadstone48/rev1/config.h @@ -70,11 +70,6 @@ along with this program. If not, see . /* Locking resynchronize hack */ //#define LOCKING_RESYNC_ENABLE -/* key combination for command */ -#define IS_COMMAND() ( \ - keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \ -) - /* ws2812 RGB LED */ #define RGB_DI_PIN D3 #define RGBLIGHT_TIMER From 8dd0ff6c7a1ebc70fb70fe64654353d3e5afeb68 Mon Sep 17 00:00:00 2001 From: fauxpark Date: Fri, 1 Feb 2019 14:14:39 +1100 Subject: [PATCH 051/171] Remove keyboard description from Adafruit BLE device name --- tmk_core/protocol/lufa/adafruit_ble.cpp | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/tmk_core/protocol/lufa/adafruit_ble.cpp b/tmk_core/protocol/lufa/adafruit_ble.cpp index bee6bb2c193..80839731fd5 100644 --- a/tmk_core/protocol/lufa/adafruit_ble.cpp +++ b/tmk_core/protocol/lufa/adafruit_ble.cpp @@ -533,8 +533,7 @@ bool adafruit_ble_enable_keyboard(void) { // Disable command echo static const char kEcho[] PROGMEM = "ATE=0"; // Make the advertised name match the keyboard - static const char kGapDevName[] PROGMEM = - "AT+GAPDEVNAME=" STR(PRODUCT) " " STR(DESCRIPTION); + static const char kGapDevName[] PROGMEM = "AT+GAPDEVNAME=" STR(PRODUCT); // Turn on keyboard support static const char kHidEnOn[] PROGMEM = "AT+BLEHIDEN=1"; From 6a4c54870cff157f1056ca65363c9e862920cbc9 Mon Sep 17 00:00:00 2001 From: Andrew Kannan Date: Sun, 7 Apr 2019 21:32:16 -0400 Subject: [PATCH 052/171] [Keyboard] Instant60 Tsangan (#5580) * Update instant60 for tsangan version * Add extra init hook * Remove hacky first init thing --- keyboards/cannonkeys/instant60/instant60.h | 46 ++++++++++++++---- .../instant60/keymaps/default/keymap.c | 4 +- .../instant60/keymaps/tsangan/keymap.c | 48 +++++++++++++++++++ keyboards/cannonkeys/stm32f072/keyboard.c | 7 ++- 4 files changed, 94 insertions(+), 11 deletions(-) create mode 100644 keyboards/cannonkeys/instant60/keymaps/tsangan/keymap.c diff --git a/keyboards/cannonkeys/instant60/instant60.h b/keyboards/cannonkeys/instant60/instant60.h index cca1b9a29c2..67d5ba98fe2 100644 --- a/keyboards/cannonkeys/instant60/instant60.h +++ b/keyboards/cannonkeys/instant60/instant60.h @@ -2,16 +2,46 @@ #include "quantum.h" -#define LAYOUT_default( \ +#define KNO KC_NO + +#define LAYOUT_ansi( \ K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, \ K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1E, \ - K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2E, \ + K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2E, \ K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, \ - K40, K41, K42, K45, K49, K4A, K4B, K4E \ + K40, K41, K42, K45, K49, K4A, K4B, K4E \ ) { \ - { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, KC_NO}, \ - { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, KC_NO, K1E }, \ - { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, KC_NO, KC_NO, K2E }, \ - { K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, KC_NO, KC_NO, KC_NO }, \ - { K40, K41, K42, KC_NO, KC_NO, K45, KC_NO, KC_NO, KC_NO, K49, K4A, K4B, KC_NO, KC_NO, K4E } \ + { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, KNO}, \ + { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, KNO, K1E }, \ + { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, KNO, KNO, K2E }, \ + { K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, KNO, KNO, KNO }, \ + { K40, K41, K42, KNO, KNO, K45, KNO, KNO, KNO, K49, K4A, K4B, KNO, KNO, K4E } \ +} + +#define LAYOUT_tsangan( \ + K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E, \ + K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1E, \ + K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2E, \ + K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3E,\ + K40, K41, K42, K45, K49, K4B, K4E \ +) { \ + { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E}, \ + { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, KNO, K1E }, \ + { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, KNO, KNO, K2E }, \ + { K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, KNO, KNO, K3E }, \ + { K40, K41, K42, KNO, KNO, K45, KNO, KNO, KNO, K49, KNO, K4B, KNO, KNO, K4E } \ +} + +#define LAYOUT_all( \ + K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E,\ + K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1E, \ + K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2E, \ + K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3E,\ + K40, K41, K42, K45, K49, K4A, K4B, K4E \ +) { \ + { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E}, \ + { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, KNO, K1E }, \ + { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, KNO, KNO, K2E }, \ + { K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, KNO, KNO, K3E }, \ + { K40, K41, K42, KNO, KNO, K45, KNO, KNO, KNO, K49, K4A, K4B, KNO, KNO, K4E } \ } diff --git a/keyboards/cannonkeys/instant60/keymaps/default/keymap.c b/keyboards/cannonkeys/instant60/keymaps/default/keymap.c index e898a3f3b70..7753181a489 100644 --- a/keyboards/cannonkeys/instant60/keymaps/default/keymap.c +++ b/keyboards/cannonkeys/instant60/keymaps/default/keymap.c @@ -30,7 +30,7 @@ enum custom_keycodes { }; const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - [_BASE] = LAYOUT_default( + [_BASE] = LAYOUT_ansi( KC_GESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, \ KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, \ KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, \ @@ -38,7 +38,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RGUI, MO(_FN1), KC_RCTL ), - [_FN1] = LAYOUT_default( + [_FN1] = LAYOUT_ansi( KC_GESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, \ RGB_TOG, RGB_MOD, KC_UP, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ BL_BRTG, KC_LEFT, KC_DOWN, KC_RGHT, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ diff --git a/keyboards/cannonkeys/instant60/keymaps/tsangan/keymap.c b/keyboards/cannonkeys/instant60/keymaps/tsangan/keymap.c new file mode 100644 index 00000000000..e95ac1b6931 --- /dev/null +++ b/keyboards/cannonkeys/instant60/keymaps/tsangan/keymap.c @@ -0,0 +1,48 @@ +/* +Copyright 2012,2013 Jun Wako + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ +#include QMK_KEYBOARD_H + +extern keymap_config_t keymap_config; + +// Each layer gets a name for readability, which is then used in the keymap matrix below. +// The underscores don't mean anything - you can have a layer called STUFF or any other name. +// Layer names don't all need to be of the same length, obviously, and you can also skip them +// entirely and just use numbers. +#define _BASE 0 +#define _FN1 1 + +enum custom_keycodes { + QWERTY = SAFE_RANGE, +}; + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [_BASE] = LAYOUT_tsangan( + KC_GESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_DEL, \ + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, \ + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, \ + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, MO(_FN1),\ + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RGUI, KC_RCTL + ), + + [_FN1] = LAYOUT_tsangan( + KC_GESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, _______,\ + RGB_TOG, RGB_MOD, KC_UP, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ + BL_BRTG, KC_LEFT, KC_DOWN, KC_RGHT, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ + BL_INC, BL_DEC, BL_TOGG, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,\ + KC_GRV, _______, _______, _______, _______, _______, RESET + ) +}; diff --git a/keyboards/cannonkeys/stm32f072/keyboard.c b/keyboards/cannonkeys/stm32f072/keyboard.c index 4316d518679..f94ecb5fbb0 100644 --- a/keyboards/cannonkeys/stm32f072/keyboard.c +++ b/keyboards/cannonkeys/stm32f072/keyboard.c @@ -15,7 +15,6 @@ backlight_config_t kb_backlight_config = { .level = BACKLIGHT_LEVELS }; - bool eeprom_is_valid(void) { return (eeprom_read_word(((void*)EEPROM_MAGIC_ADDR)) == EEPROM_MAGIC && @@ -51,9 +50,13 @@ void eeprom_init_kb(void) } else { // Save the magic number last, in case saving was interrupted eeprom_set_valid(true); + save_backlight_config_to_eeprom(); } } +__attribute__ ((weak)) +void matrix_init_board(void); + void matrix_init_kb(void){ eeprom_init_kb(); /* MOSI pin*/ @@ -64,6 +67,8 @@ void matrix_init_kb(void){ leds_init(); #endif backlight_init_ports(); + + matrix_init_board(); } void matrix_scan_kb(void) From eef00e4da110746b9dce4a710c7eeb8dab888a14 Mon Sep 17 00:00:00 2001 From: Jan Christoph Ebersbach Date: Mon, 8 Apr 2019 04:20:09 +0200 Subject: [PATCH 053/171] [Keyboard] Add Signum 3.0 for the elite-c (#5478) * Add keyboard Signum 3.0 for the elite-c * Update readme.md * Remove unused macros * Use bootmagic lite instead of full * Add warning to keymap.c that it's auto-generate * Add description for customizing keyboard layouts * Make generate_km.py executable * Make right shift available in numpad layer * Update keyboards/signum/3_0/elitec/readme.md Co-Authored-By: jceb * Update keyboards/signum/3_0/elitec/readme.md Co-Authored-By: jceb * Fix typo in symbol name --- keyboards/signum/3_0/elitec/config.h | 26 + keyboards/signum/3_0/elitec/elitec.c | 1 + keyboards/signum/3_0/elitec/elitec.h | 15 + keyboards/signum/3_0/elitec/info.json | 76 ++ .../3_0/elitec/keymaps/default/generate_km.py | 130 +++ .../3_0/elitec/keymaps/default/keymap.c | 754 ++++++++++++++++++ .../elitec/keymaps/default/km_template.txt | 20 + .../3_0/elitec/keymaps/default/layout.py | 493 ++++++++++++ .../3_0/elitec/keymaps/default/readme.md | 27 + keyboards/signum/3_0/elitec/readme.md | 14 + keyboards/signum/3_0/elitec/rules.mk | 62 ++ 11 files changed, 1618 insertions(+) create mode 100644 keyboards/signum/3_0/elitec/config.h create mode 100644 keyboards/signum/3_0/elitec/elitec.c create mode 100644 keyboards/signum/3_0/elitec/elitec.h create mode 100644 keyboards/signum/3_0/elitec/info.json create mode 100755 keyboards/signum/3_0/elitec/keymaps/default/generate_km.py create mode 100644 keyboards/signum/3_0/elitec/keymaps/default/keymap.c create mode 100644 keyboards/signum/3_0/elitec/keymaps/default/km_template.txt create mode 100644 keyboards/signum/3_0/elitec/keymaps/default/layout.py create mode 100644 keyboards/signum/3_0/elitec/keymaps/default/readme.md create mode 100644 keyboards/signum/3_0/elitec/readme.md create mode 100644 keyboards/signum/3_0/elitec/rules.mk diff --git a/keyboards/signum/3_0/elitec/config.h b/keyboards/signum/3_0/elitec/config.h new file mode 100644 index 00000000000..3df07d17fcb --- /dev/null +++ b/keyboards/signum/3_0/elitec/config.h @@ -0,0 +1,26 @@ +#pragma once + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0xF1E7 +#define PRODUCT_ID 0x5163 +#define DEVICE_VER 0x0000 +#define MANUFACTURER troyfletcher +#define PRODUCT Signum +#define DESCRIPTION q.m.k. keyboard firmware for Signum 3.0 + +/* key matrix size */ +#define MATRIX_ROWS 4 +#define MATRIX_COLS 12 + +/* key matrix pins */ +#define MATRIX_ROW_PINS { D2, D1, F5, B5 } +#define MATRIX_COL_PINS { B4, D7, D0, E6, D4, F6, F4, F7, B1, B3, C6, B2 } +#define UNUSED_PINS + +/* Set 0 if debouncing isn't needed */ +#define DEBOUNCING_DELAY 5 + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +#define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/signum/3_0/elitec/elitec.c b/keyboards/signum/3_0/elitec/elitec.c new file mode 100644 index 00000000000..78195260b11 --- /dev/null +++ b/keyboards/signum/3_0/elitec/elitec.c @@ -0,0 +1 @@ +#include "elitec.h" diff --git a/keyboards/signum/3_0/elitec/elitec.h b/keyboards/signum/3_0/elitec/elitec.h new file mode 100644 index 00000000000..1749969de35 --- /dev/null +++ b/keyboards/signum/3_0/elitec/elitec.h @@ -0,0 +1,15 @@ +#pragma once + +#include "quantum.h" + +#define LAYOUT( \ + K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, \ + K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, \ + K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, \ + K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311 \ +) { \ + { K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011 }, \ + { K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111 }, \ + { K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211 }, \ + { K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311 } \ +} diff --git a/keyboards/signum/3_0/elitec/info.json b/keyboards/signum/3_0/elitec/info.json new file mode 100644 index 00000000000..e93dceb13c7 --- /dev/null +++ b/keyboards/signum/3_0/elitec/info.json @@ -0,0 +1,76 @@ +{ + "keyboard_name": "Signum 3.0", + "url": "http://troyfletcher.net/", + "maintainer": "jceb", + "width": 17, + "height": 8, + "layouts": { + "LAYOUT": { + "layout": [ + + { "x": 1.25, "y": 0.75, "r": 15 }, + { "x": 1.25, "y": 1.75, "r": 15 }, + { "x": 1.25, "y": 2.75, "r": 15 }, + { "x": 1.25, "y": 4.25, "r": 15 }, + + { "x": 2.25, "y": 0.5, "r": 15 }, + { "x": 2.25, "y": 1.5, "r": 15 }, + { "x": 2.25, "y": 2.5, "r": 15 }, + { "x": 2.25, "y": 3.5, "r": 15 }, + + { "x": 3.25, "y": 0, "r": 15 }, + { "x": 3.25, "y": 1, "r": 15 }, + { "x": 3.25, "y": 2, "r": 15 }, + { "x": 3.25, "y": 3, "r": 15 }, + + { "x": 4.25, "y": 0.25, "r": 15 }, + { "x": 4.25, "y": 1.25, "r": 15 }, + { "x": 4.25, "y": 2.25, "r": 15 }, + + { "x": 5.25, "y": 0.5, "r": 15 }, + { "x": 5.25, "y": 1.5, "r": 15 }, + { "x": 5.25, "y": 2.5, "r": 15 }, + { "x": 5.25, "y": 4.5, "r": 15, "h": 1.5 }, + + { "x": 6.25, "y": 0.75, "r": 15 }, + { "x": 6.25, "y": 1.75, "r": 15 }, + { "x": 6.25, "y": 2.75, "r": 15 }, + { "x": 6.25, "y": 4.25, "r": 15, "h": 2 }, + + { "x": 7.25, "y": 4.5, "r": 15, "h": 1.5 }, + + { "x": 8.25, "y": 4.5, "r": -15, "h": 1.5 }, + + { "x": 9.25, "y": 0.75, "r": -15 }, + { "x": 9.25, "y": 1.75, "r": -15 }, + { "x": 9.25, "y": 2.75, "r": -15 }, + { "x": 9.25, "y": 4.25, "r": -15, "h": 2 }, + + { "x": 10.25, "y": 0.5, "r": -15 }, + { "x": 10.25, "y": 1.5, "r": -15 }, + { "x": 10.25, "y": 2.5, "r": -15 }, + { "x": 10.25, "y": 4.5, "r": -15, "h": 1.5 }, + + { "x": 11.25, "y": 0.25, "r": -15 }, + { "x": 11.25, "y": 1.25, "r": -15 }, + { "x": 11.25, "y": 2.25, "r": -15 }, + + { "x": 12.25, "y": 0, "r": -15 }, + { "x": 12.25, "y": 1, "r": -15 }, + { "x": 12.25, "y": 2, "r": -15 }, + { "x": 12.25, "y": 3, "r": -15 }, + + { "x": 13.25, "y": 0.5, "r": -15 }, + { "x": 13.25, "y": 1.5, "r": -15 }, + { "x": 13.25, "y": 2.5, "r": -15 }, + { "x": 13.25, "y": 3.5, "r": -15 }, + + { "x": 14.25, "y": 0.75, "r": -15 }, + { "x": 14.25, "y": 1.75, "r": -15 }, + { "x": 14.25, "y": 2.75, "r": -15 }, + { "x": 14.25, "y": 4.25, "r": -15 } + + ] + } + } +} diff --git a/keyboards/signum/3_0/elitec/keymaps/default/generate_km.py b/keyboards/signum/3_0/elitec/keymaps/default/generate_km.py new file mode 100755 index 00000000000..5147121b34d --- /dev/null +++ b/keyboards/signum/3_0/elitec/keymaps/default/generate_km.py @@ -0,0 +1,130 @@ +#!/usr/bin/env python3 +# -*- coding: utf-8 -*- + +from sortedcontainers import SortedDict +import layout +import re + +# TODO: auto-generate mutex layers +# TODO: auto-generate update_tri_layer (_state) + + +def gen_uc_iter(): + length = len(layout.uc_dict) + for key, value in layout.uc_dict.items(): + length -= 1 + if length: + yield (key, value, False) + else: + yield (key, value, True) + + +def translate(s): + if re.match("^[0-9]$", s): + return ("KC_{0}".format(s), " {0} ".format(s)) + elif re.match("^[a-z]$", s): + return ("KC_{0}".format(s.upper()), " {0} ".format(s)) + elif re.match("^[A-Z]$", s): + return ("S(KC_{0})".format(s), " {0} ".format(s)) + elif re.match("^F[0-9]{1,2}$", s): # Fn, works from F0 to F99 + return ("KC_{0}".format(s), "{0:^7}".format(s)) + elif re.match("^DF[0-9]{1,2}$", s): # DFn, works from DF0 to DF99 + return ("DF({0})".format(s[2:]), "{0:^7}".format(s)) + elif re.match("^MO[0-9]{1,2}$", s): # MOn, works from MO0 to MO99 + return ("MO({0})".format(s[2:]), "{0:^7}".format(s)) + elif re.match("^OSL[0-9]{1,2}$", s): # OSLn, works from OSL0 to OSL99 + return ("OSL({0})".format(s[3:]), "{0:^7}".format(s)) + elif re.match("^TG[0-9]{1,2}$", s): # TGn, works from TG0 to TG99 + return ("TG({0})".format(s[2:]), "{0:^7}".format(s)) + elif re.match("^TO[0-9]{1,2}$", s): # Tn, works from TO0 to TO99 + return ("TO({0})".format(s[2:]), "{0:^7}".format(s)) + elif re.match("^TT[0-9]{1,2}$", s): # Tn, works from TT0 to TT99 + return ("TT({0})".format(s[2:]), "{0:^7}".format(s)) + elif s in layout.uc_dict: + return ("X("+s+")", " {0} ".format(chr(int(layout.uc_dict[s], 0)))) + elif s in layout.qmk_dict: + return (layout.qmk_dict[s], "{0:^7}".format(s)) + elif s == s.upper() and s.startswith("KC_"): + return (s, "{0:^7}".format(s[2:])) + else: + return ("XXXXXXX", " {0} ".format(chr(128165))) + + +def toKC(s): + (kc, lgd) = translate(s) + return kc + + +def toLgd(s): + (kc, lgd) = translate(s) + return lgd + + +if __name__ == "__main__": + + template = open("km_template.txt", mode="r") + output = open("keymap.c", mode="w", encoding='utf-8') + + doCopy = False + + for line in template: + doCopy = True + if line.startswith("//"): + doCopy = False +# output.write(str(layout.uc_dict)) + for k, v, isLast in gen_uc_iter(): + if isLast: + output.write(k + "\n") + else: + output.write(k + ",\n") + if line.startswith("//"): + doCopy = False + for k, v, isLast in gen_uc_iter(): + if isLast: + output.write(u"\t[{0}] = {1} // {2}\n".format(k, v, chr(int(v, 0)))) + else: + output.write(u"\t[{0}] = {1}, // {2}\n".format(k, v, chr(int(v, 0)))) + if line.startswith("//"): + doCopy = False + counter = len(layout.layers) + layer = 0 + S = layout.static + for L in layout.layers: + counter -= 1 + r_counter = 4 + output.write("/* Layer %d\n" % layer) + output.write(" * ------------------------------------------------- -------------------------------------------------\n") + output.write(" * |{0}|{1}|{2}|{3}|{4}|{5}| |{6}|{7}|{8}|{9}|{10}|{11}|\n".format(toLgd(L[0][0]), toLgd(L[0][1]), toLgd(L[0][2]), toLgd(L[0][3]), toLgd(L[0][4]), toLgd(L[0][5]), toLgd(L[0][6]), toLgd(L[0][7]), toLgd(L[0][8]), toLgd(L[0][9]), toLgd(L[0][10]), toLgd(L[0][11]))) + output.write(" * ------------------------------------------------- -------------------------------------------------\n") + output.write(" * |{0}|{1}|{2}|{3}|{4}|{5}| |{6}|{7}|{8}|{9}|{10}|{11}|\n".format(toLgd(L[1][0]), toLgd(L[1][1]), toLgd(L[1][2]), toLgd(L[1][3]), toLgd(L[1][4]), toLgd(L[1][5]), toLgd(L[1][6]), toLgd(L[1][7]), toLgd(L[1][8]), toLgd(L[1][9]), toLgd(L[1][10]), toLgd(L[1][11]))) + output.write(" * ------------------------------------------------- -------------------------------------------------\n") + output.write(" * |{0}|{1}|{2}|{3}|{4}|{5}| |{6}|{7}|{8}|{9}|{10}|{11}|\n".format(toLgd(L[2][0]), toLgd(L[2][1]), toLgd(L[2][2]), toLgd(L[2][3]), toLgd(L[2][4]), toLgd(L[2][5]), toLgd(L[2][6]), toLgd(L[2][7]), toLgd(L[2][8]), toLgd(L[2][9]), toLgd(L[2][10]), toLgd(L[2][11]))) + output.write(" * -----------------------------------------------------------------------------------------------------------------\n") + output.write(" * {0} {1} {2} |{3}|{4}|{5}|{6}|{7}|{8}| {9} {10} {11}".format(toLgd(L[3][0]), toLgd(L[3][1]), toLgd(L[3][2]), toLgd(L[3][3]), toLgd(L[3][4]), toLgd(L[3][5]), toLgd(L[3][6]), toLgd(L[3][7]), toLgd(L[3][8]), toLgd(L[3][9]), toLgd(L[3][10]), toLgd(L[3][11])).rstrip()+"\n") + output.write(" * -------------------------------------------------\n") + output.write(" */\n") + + l_code = '\tLAYOUT(\n' + for r in range(r_counter): + r_counter -= 1 + c_counter = 12 + l_code += '\t\t' + for c in range(c_counter): + c_counter -= 1 + if c != 0: + l_code += " " + l_code += "%s" % toKC(L[r][c]) + if r_counter or c_counter: + l_code += "," + l_code += '\n' + if counter: + l_code += "\t),\n\n" + else: + l_code += "\t)\n" + output.write(l_code) + layer += 1 + if doCopy: + output.write(line) + + template.close() + output.close() diff --git a/keyboards/signum/3_0/elitec/keymaps/default/keymap.c b/keyboards/signum/3_0/elitec/keymaps/default/keymap.c new file mode 100644 index 00000000000..d7feba349a6 --- /dev/null +++ b/keyboards/signum/3_0/elitec/keymaps/default/keymap.c @@ -0,0 +1,754 @@ +/* keymap.c is auto-generated, don't edit it directly. + * Further instructions are provided in readme.md */ + +#include QMK_KEYBOARD_H + +enum unicode_name { +AB_ARC, +AB_LINE, +AB_VEC, +ACUTE, +AE, +ALEPH, +ALLA_BR, +ALPHA, +AND, +AND_, +ANGLE, +AST_MID, +A_SET, +BARLINE, +BARLINE_D, +BARLINE_FIN, +BETA, +BETH, +BICOND, +BIG_O, +BISHOP_B, +BISHOP_W, +BITCOIN, +BOTTOM, +BOWTIE, +BRA, +BULLET, +B_SET, +CENT, +CHI, +CIRCLE, +CIRC_MID, +CLUBS_B, +CLUBS_W, +CODA, +COMMON_T, +COPYR, +CORRESP, +CROSS, +CURRENCY, +C_CLEF, +C_SET, +DACAPO, +DALSEGNO, +DEFINE, +DEGREE, +DELTA, +DIAMS_B, +DIAMS_W, +DIGAMMA, +DIVISION, +DOTS, +DOT_OP, +DQT1, +DQT2, +DQT3, +DQT4, +DQT5, +EIGHTH_N, +EIGHTH_P, +EJECT, +EMBED, +EMDASH, +EMPTYSET, +EPSILON, +EQUIV, +ETA, +EURO, +EXISTS, +FEMALE, +FLAG_B, +FLAG_W, +FLAT, +FORALL, +FORWARD, +FOURIER, +FULL_OUTER, +F_CLEF, +F_SET, +GAMMA, +GREAT_GREAT, +GR_EQ, +G_CLEF, +HALF_N, +HALF_P, +HAMILTON, +HEARTS_B, +HEARTS_W, +HETA, +H_SET, +IMAG_P, +IMPL, +IMPL_REV, +IN, +INDICATOR, +INEQUAL, +INFO, +INFTY, +INTEGRAL, +INTERS, +INTERS_, +INV_EXCL, +INV_QST, +IOTA, +ISOMORPH, +KAPPA, +KET, +KEY, +KING_B, +KING_W, +KNIGHT_B, +KNIGHT_W, +KOPPA, +K_SET, +LAMBDA, +LAPLACE, +LEFT_CEIL, +LEFT_FLOOR, +LEFT_OUTER, +LENGTH, +LESS_LESS, +LETTER, +LOCK, +LOCK_OPEN, +LS_EQ, +LTIMES, +MALE, +MAPSTO, +MDOT, +MICRO, +MINUS_OP, +MINUS_PLUS, +MINUTE, +MODELS, +MY, +M_ANGLE, +NABLA, +NATURAL, +NO, +NOT, +NOTIN, +NOTSUBS, +NOT_DIV, +NOT_PARA, +NY, +N_SET, +N_TILDE, +OE, +OHM, +OMEGA, +OMIKRON, +OR, +OR_, +PARALLEL, +PARTIAL, +PAWN_B, +PAWN_W, +PEDAL, +PEDAL_UP, +PERMIL, +PHI, +PHONE, +PI, +PLAY, +PLUS_MINUS, +PLUS_OP, +POUND, +POWERSET, +PRED, +PROD_, +PROP_TO, +PR_SUBSET, +PSI, +QED, +QUART_N, +QUART_P, +QUEEN_B, +QUEEN_W, +Q_SET, +REAL_P, +REGTM, +REPEAT_E, +REPEAT_S, +REWIND, +RHO, +RIGHT_CEIL, +RIGHT_FLOOR, +RIGHT_OUTER, +RIGHT_TACK, +ROOK_B, +ROOK_W, +ROOT, +ROUGHLY, +RTIMES, +R_SET, +SAMPI, +SAN, +SCHO, +SECOND, +SECTION, +SEGNO, +SETMINUS, +SHARP, +SHOGI_B, +SHOGI_BD, +SHOGI_W, +SHOGI_WD, +SIGMA, +SIXT_N, +SIXT_P, +SNEK, +SPADES_B, +SPADES_W, +SPEAKER_DN, +SPEAKER_TG, +SPEAKER_UP, +SQT1, +SQT2, +SQT3, +SQT4, +SQT5, +SQUARE, +SQ_LS, +SQ_LS_EQ, +STAFF, +STIGMA, +STOP, +SUBSET, +SUBSET_REV, +SUCC, +SUM_, +SUP1, +SUP2, +SUP3, +SUP_A, +SUP_MIN, +SUP_O, +SZ, +TAU, +THETA, +TIMES, +TIMES_OP, +TMARK, +TO, +TOP, +TRIANGLE, +UE, +UNION, +UNION_, +U_SET, +WHOLE_N, +WHOLE_P, +XI, +YEN, +YES, +YPSI2, +YPSILON, +ZETA, +Z_SET, +ae, +alpha, +beta, +beta2, +chi, +delta, +digamma, +e_FUN, +epsi2, +epsilon, +eta, +gamma, +heta, +i_UNIT, +iota, +kappa, +kappa2, +koppa, +lambda, +my, +n_tilde, +ny, +oe, +omega, +omikron, +phi, +phi2, +pi, +pi2, +psi, +rho, +rho2, +sampi, +san, +scho, +sigma, +sigma2, +sigma3, +stigma, +sz, +tau, +theta, +theta2, +ue, +xi, +ypsilon, +zeta +}; + +const uint32_t PROGMEM unicode_map[] = { + [AB_ARC] = 0x0361, // ͡ + [AB_LINE] = 0x0305, // ̅ + [AB_VEC] = 0x20d7, // ⃗ + [ACUTE] = 0x00b4, // ´ + [AE] = 0x00c4, // Ä + [ALEPH] = 0x2135, // ℵ + [ALLA_BR] = 0x1d135, // 𝄵 + [ALPHA] = 0x0391, // Α + [AND] = 0x2227, // ∧ + [AND_] = 0x22c0, // ⋀ + [ANGLE] = 0x2220, // ∠ + [AST_MID] = 0x2217, // ∗ + [A_SET] = 0x1d538, // 𝔸 + [BARLINE] = 0x1d100, // 𝄀 + [BARLINE_D] = 0x1d101, // 𝄁 + [BARLINE_FIN] = 0x1d102, // 𝄂 + [BETA] = 0x0392, // Β + [BETH] = 0x2136, // ℶ + [BICOND] = 0x21d4, // ⇔ + [BIG_O] = 0x1d4aa, // 𝒪 + [BISHOP_B] = 0x265d, // ♝ + [BISHOP_W] = 0x2657, // ♗ + [BITCOIN] = 0x20bf, // ₿ + [BOTTOM] = 0x22a5, // ⊥ + [BOWTIE] = 0x22c8, // ⋈ + [BRA] = 0x27e8, // ⟨ + [BULLET] = 0x2022, // • + [B_SET] = 0x1d539, // 𝔹 + [CENT] = 0x00a2, // ¢ + [CHI] = 0x03a7, // Χ + [CIRCLE] = 0x25cb, // ○ + [CIRC_MID] = 0x2218, // ∘ + [CLUBS_B] = 0x2663, // ♣ + [CLUBS_W] = 0x2667, // ♧ + [CODA] = 0x1d10c, // 𝄌 + [COMMON_T] = 0x1d134, // 𝄴 + [COPYR] = 0x00a9, // © + [CORRESP] = 0x2259, // ≙ + [CROSS] = 0x2020, // † + [CURRENCY] = 0x00a4, // ¤ + [C_CLEF] = 0x1d121, // 𝄡 + [C_SET] = 0x2102, // ℂ + [DACAPO] = 0x1d10a, // 𝄊 + [DALSEGNO] = 0x1d109, // 𝄉 + [DEFINE] = 0x2254, // ≔ + [DEGREE] = 0x00b0, // ° + [DELTA] = 0x0394, // Δ + [DIAMS_B] = 0x2666, // ♦ + [DIAMS_W] = 0x2662, // ♢ + [DIGAMMA] = 0x03dc, // Ϝ + [DIVISION] = 0x00f7, // ÷ + [DOTS] = 0x2026, // … + [DOT_OP] = 0x2299, // ⊙ + [DQT1] = 0x00bb, // » + [DQT2] = 0x201e, // „ + [DQT3] = 0x201c, // “ + [DQT4] = 0x201d, // ” + [DQT5] = 0x00ab, // « + [EIGHTH_N] = 0x1d160, // 𝅘𝅥𝅮 + [EIGHTH_P] = 0x1d13e, // 𝄾 + [EJECT] = 0x23cf, // ⏏ + [EMBED] = 0x21aa, // ↪ + [EMDASH] = 0x2014, // — + [EMPTYSET] = 0x2205, // ∅ + [EPSILON] = 0x0395, // Ε + [EQUIV] = 0x2261, // ≡ + [ETA] = 0x0397, // Η + [EURO] = 0x20ac, // € + [EXISTS] = 0x2203, // ∃ + [FEMALE] = 0x2640, // ♀ + [FLAG_B] = 0x2691, // ⚑ + [FLAG_W] = 0x2690, // ⚐ + [FLAT] = 0x266d, // ♭ + [FORALL] = 0x2200, // ∀ + [FORWARD] = 0x23ed, // ⏭ + [FOURIER] = 0x2131, // ℱ + [FULL_OUTER] = 0x27d7, // ⟗ + [F_CLEF] = 0x1d122, // 𝄢 + [F_SET] = 0x1d53d, // 𝔽 + [GAMMA] = 0x0393, // Γ + [GREAT_GREAT] = 0x226b, // ≫ + [GR_EQ] = 0x2265, // ≥ + [G_CLEF] = 0x1d11e, // 𝄞 + [HALF_N] = 0x1d15e, // 𝅗𝅥 + [HALF_P] = 0x1d13c, // 𝄼 + [HAMILTON] = 0x210b, // ℋ + [HEARTS_B] = 0x2665, // ♥ + [HEARTS_W] = 0x2661, // ♡ + [HETA] = 0x0370, // Ͱ + [H_SET] = 0x210d, // ℍ + [IMAG_P] = 0x2111, // ℑ + [IMPL] = 0x21d2, // ⇒ + [IMPL_REV] = 0x21d0, // ⇐ + [IN] = 0x2208, // ∈ + [INDICATOR] = 0x1d7cf, // 𝟏 + [INEQUAL] = 0x2260, // ≠ + [INFO] = 0x1f6c8, // 🛈 + [INFTY] = 0x221e, // ∞ + [INTEGRAL] = 0x222b, // ∫ + [INTERS] = 0x2229, // ∩ + [INTERS_] = 0x22c2, // ⋂ + [INV_EXCL] = 0x00a1, // ¡ + [INV_QST] = 0x00bf, // ¿ + [IOTA] = 0x0399, // Ι + [ISOMORPH] = 0x2245, // ≅ + [KAPPA] = 0x039a, // Κ + [KET] = 0x27e9, // ⟩ + [KEY] = 0x1f511, // 🔑 + [KING_B] = 0x265a, // ♚ + [KING_W] = 0x2654, // ♔ + [KNIGHT_B] = 0x265e, // ♞ + [KNIGHT_W] = 0x2658, // ♘ + [KOPPA] = 0x03d8, // Ϙ + [K_SET] = 0x1d542, // 𝕂 + [LAMBDA] = 0x039b, // Λ + [LAPLACE] = 0x2112, // ℒ + [LEFT_CEIL] = 0x2308, // ⌈ + [LEFT_FLOOR] = 0x230a, // ⌊ + [LEFT_OUTER] = 0x27d5, // ⟕ + [LENGTH] = 0x2113, // ℓ + [LESS_LESS] = 0x226a, // ≪ + [LETTER] = 0x2709, // ✉ + [LOCK] = 0x1f512, // 🔒 + [LOCK_OPEN] = 0x1f513, // 🔓 + [LS_EQ] = 0x2264, // ≤ + [LTIMES] = 0x22c9, // ⋉ + [MALE] = 0x2642, // ♂ + [MAPSTO] = 0x27fc, // ⟼ + [MDOT] = 0x22c5, // ⋅ + [MICRO] = 0x00b5, // µ + [MINUS_OP] = 0x2296, // ⊖ + [MINUS_PLUS] = 0x2213, // ∓ + [MINUTE] = 0x02b9, // ʹ + [MODELS] = 0x22a7, // ⊧ + [MY] = 0x039c, // Μ + [M_ANGLE] = 0x2221, // ∡ + [NABLA] = 0x2207, // ∇ + [NATURAL] = 0x266e, // ♮ + [NO] = 0x2717, // ✗ + [NOT] = 0x00ac, // ¬ + [NOTIN] = 0x2209, // ∉ + [NOTSUBS] = 0x2288, // ⊈ + [NOT_DIV] = 0x2224, // ∤ + [NOT_PARA] = 0x2226, // ∦ + [NY] = 0x039d, // Ν + [N_SET] = 0x2115, // ℕ + [N_TILDE] = 0x00d1, // Ñ + [OE] = 0x00d6, // Ö + [OHM] = 0x2126, // Ω + [OMEGA] = 0x03a9, // Ω + [OMIKRON] = 0x039f, // Ο + [OR] = 0x2228, // ∨ + [OR_] = 0x22c1, // ⋁ + [PARALLEL] = 0x2225, // ∥ + [PARTIAL] = 0x2202, // ∂ + [PAWN_B] = 0x265f, // ♟ + [PAWN_W] = 0x2659, // ♙ + [PEDAL] = 0x1d1ae, // 𝆮 + [PEDAL_UP] = 0x1d1af, // 𝆯 + [PERMIL] = 0x2030, // ‰ + [PHI] = 0x03a6, // Φ + [PHONE] = 0x2706, // ✆ + [PI] = 0x03a0, // Π + [PLAY] = 0x23ef, // ⏯ + [PLUS_MINUS] = 0x00b1, // ± + [PLUS_OP] = 0x2295, // ⊕ + [POUND] = 0x00a3, // £ + [POWERSET] = 0x1d4ab, // 𝒫 + [PRED] = 0x227a, // ≺ + [PROD_] = 0x220f, // ∏ + [PROP_TO] = 0x221d, // ∝ + [PR_SUBSET] = 0x2282, // ⊂ + [PSI] = 0x03a8, // Ψ + [QED] = 0x220e, // ∎ + [QUART_N] = 0x1d15f, // 𝅘𝅥 + [QUART_P] = 0x1d13d, // 𝄽 + [QUEEN_B] = 0x265b, // ♛ + [QUEEN_W] = 0x2655, // ♕ + [Q_SET] = 0x211a, // ℚ + [REAL_P] = 0x211c, // ℜ + [REGTM] = 0x00ae, // ® + [REPEAT_E] = 0x1d107, // 𝄇 + [REPEAT_S] = 0x1d106, // 𝄆 + [REWIND] = 0x23ee, // ⏮ + [RHO] = 0x03a1, // Ρ + [RIGHT_CEIL] = 0x2309, // ⌉ + [RIGHT_FLOOR] = 0x230b, // ⌋ + [RIGHT_OUTER] = 0x27d6, // ⟖ + [RIGHT_TACK] = 0x22a2, // ⊢ + [ROOK_B] = 0x265c, // ♜ + [ROOK_W] = 0x2656, // ♖ + [ROOT] = 0x221a, // √ + [ROUGHLY] = 0x2248, // ≈ + [RTIMES] = 0x22ca, // ⋊ + [R_SET] = 0x211d, // ℝ + [SAMPI] = 0x0372, // Ͳ + [SAN] = 0x03fa, // Ϻ + [SCHO] = 0x03f7, // Ϸ + [SECOND] = 0x02ba, // ʺ + [SECTION] = 0x00a7, // § + [SEGNO] = 0x1d10b, // 𝄋 + [SETMINUS] = 0x2216, // ∖ + [SHARP] = 0x266f, // ♯ + [SHOGI_B] = 0x2617, // ☗ + [SHOGI_BD] = 0x26ca, // ⛊ + [SHOGI_W] = 0x2616, // ☖ + [SHOGI_WD] = 0x26c9, // ⛉ + [SIGMA] = 0x03a3, // Σ + [SIXT_N] = 0x1d161, // 𝅘𝅥𝅯 + [SIXT_P] = 0x1d13f, // 𝄿 + [SNEK] = 0x1f40d, // 🐍 + [SPADES_B] = 0x2660, // ♠ + [SPADES_W] = 0x2664, // ♤ + [SPEAKER_DN] = 0x1f509, // 🔉 + [SPEAKER_TG] = 0x1f507, // 🔇 + [SPEAKER_UP] = 0x1f50a, // 🔊 + [SQT1] = 0x203a, // › + [SQT2] = 0x201a, // ‚ + [SQT3] = 0x2018, // ‘ + [SQT4] = 0x2019, // ’ + [SQT5] = 0x2039, // ‹ + [SQUARE] = 0x25a1, // □ + [SQ_LS] = 0x228f, // ⊏ + [SQ_LS_EQ] = 0x2291, // ⊑ + [STAFF] = 0x1d11a, // 𝄚 + [STIGMA] = 0x03da, // Ϛ + [STOP] = 0x25fc, // ◼ + [SUBSET] = 0x2286, // ⊆ + [SUBSET_REV] = 0x2287, // ⊇ + [SUCC] = 0x227b, // ≻ + [SUM_] = 0x2211, // ∑ + [SUP1] = 0x00b9, // ¹ + [SUP2] = 0x00b2, // ² + [SUP3] = 0x00b3, // ³ + [SUP_A] = 0x00aa, // ª + [SUP_MIN] = 0x207b, // ⁻ + [SUP_O] = 0x00ba, // º + [SZ] = 0x1e9e, // ẞ + [TAU] = 0x03a4, // Τ + [THETA] = 0x0398, // Θ + [TIMES] = 0x00d7, // × + [TIMES_OP] = 0x2297, // ⊗ + [TMARK] = 0x2122, // ™ + [TO] = 0x27f6, // ⟶ + [TOP] = 0x22a4, // ⊤ + [TRIANGLE] = 0x25b3, // △ + [UE] = 0x00dc, // Ü + [UNION] = 0x222a, // ∪ + [UNION_] = 0x22c3, // ⋃ + [U_SET] = 0x1d54c, // 𝕌 + [WHOLE_N] = 0x1d15d, // 𝅝 + [WHOLE_P] = 0x1d13b, // 𝄻 + [XI] = 0x039e, // Ξ + [YEN] = 0x00a5, // ¥ + [YES] = 0x2713, // ✓ + [YPSI2] = 0x03d2, // ϒ + [YPSILON] = 0x03a5, // Υ + [ZETA] = 0x0396, // Ζ + [Z_SET] = 0x2124, // ℤ + [ae] = 0x00e4, // ä + [alpha] = 0x03b1, // α + [beta] = 0x03b2, // β + [beta2] = 0x03d0, // ϐ + [chi] = 0x03c7, // χ + [delta] = 0x03b4, // δ + [digamma] = 0x03dd, // ϝ + [e_FUN] = 0x0065, // e + [epsi2] = 0x03f5, // ϵ + [epsilon] = 0x03b5, // ε + [eta] = 0x03b7, // η + [gamma] = 0x03b3, // γ + [heta] = 0x0371, // ͱ + [i_UNIT] = 0x0069, // i + [iota] = 0x03b9, // ι + [kappa] = 0x03ba, // κ + [kappa2] = 0x03f0, // ϰ + [koppa] = 0x03d9, // ϙ + [lambda] = 0x03bb, // λ + [my] = 0x03bc, // μ + [n_tilde] = 0x00f1, // ñ + [ny] = 0x03bd, // ν + [oe] = 0x00f6, // ö + [omega] = 0x03c9, // ω + [omikron] = 0x03bf, // ο + [phi] = 0x03c6, // φ + [phi2] = 0x03d5, // ϕ + [pi] = 0x03c0, // π + [pi2] = 0x03d6, // ϖ + [psi] = 0x03c8, // ψ + [rho] = 0x03c1, // ρ + [rho2] = 0x03f1, // ϱ + [sampi] = 0x0373, // ͳ + [san] = 0x03fb, // ϻ + [scho] = 0x03f8, // ϸ + [sigma] = 0x03c3, // σ + [sigma2] = 0x03c2, // ς + [sigma3] = 0x03f2, // ϲ + [stigma] = 0x03db, // ϛ + [sz] = 0x00df, // ß + [tau] = 0x03c4, // τ + [theta] = 0x03b8, // θ + [theta2] = 0x03d1, // ϑ + [ue] = 0x00fc, // ü + [xi] = 0x03be, // ξ + [ypsilon] = 0x03c5, // υ + [zeta] = 0x03b6 // ζ +}; + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + +/* Layer 0 + * ------------------------------------------------- ------------------------------------------------- + * | Tab | q | w | e | r | t | | y | u | i | o | p | [ | + * ------------------------------------------------- ------------------------------------------------- + * | LCtrl | a | s | d | f | g | | h | j | k | l | ; | ' | + * ------------------------------------------------- ------------------------------------------------- + * |LShift(| z | x | c | v | b | | n | m | , | . | / |RShift)| + * ----------------------------------------------------------------------------------------------------------------- + * MO2 LGui LAlt | TT2 |LT6_SPC| TT4 | Enter | Space | TT2 | RAlt RGui RCtrl + * ------------------------------------------------- + */ + LAYOUT( + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, + KC_LCTRL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, + KC_LSPO, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSPC, + MO(2), KC_LGUI, KC_LALT, TT(2), LT(6, KC_SPC), TT(4), KC_ENT, KC_SPC, TT(2), KC_RALT, KC_RGUI, KC_RCTRL + ), + +/* Layer 1 + * ------------------------------------------------- ------------------------------------------------- + * | Tab | q | w | f | p | g | | j | l | u | y | ; | [ | + * ------------------------------------------------- ------------------------------------------------- + * | LCtrl | a | r | s | t | d | | h | n | e | i | o | ' | + * ------------------------------------------------- ------------------------------------------------- + * |LShift(| z | x | c | v | b | | k | m | , | . | / |RShift)| + * ----------------------------------------------------------------------------------------------------------------- + * MO2 LGui LAlt | TT2 |LT6_SPC| TT4 | Enter | Space | TT2 | RAlt RGui RCtrl + * ------------------------------------------------- + */ + LAYOUT( + KC_TAB, KC_Q, KC_W, KC_F, KC_P, KC_G, KC_J, KC_L, KC_U, KC_Y, KC_SCLN, KC_LBRC, + KC_LCTRL, KC_A, KC_R, KC_S, KC_T, KC_D, KC_H, KC_N, KC_E, KC_I, KC_O, KC_QUOT, + KC_LSPO, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_K, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSPC, + MO(2), KC_LGUI, KC_LALT, TT(2), LT(6, KC_SPC), TT(4), KC_ENT, KC_SPC, TT(2), KC_RALT, KC_RGUI, KC_RCTRL + ), + +/* Layer 2 + * ------------------------------------------------- ------------------------------------------------- + * | ` | 1 | 2 | 3 | 4 | 5 | | 6 | 7 | 8 | 9 | 0 | ] | + * ------------------------------------------------- ------------------------------------------------- + * | | DF0 | DF1 | XXX | XXX | MO3 | | 4 | 4 | 5 | 6 | - | = | + * ------------------------------------------------- ------------------------------------------------- + * | | MO5 | XXX | XXX | XXX | XXX | | 1 | 1 | 2 | 3 | \ | | + * ----------------------------------------------------------------------------------------------------------------- + * TG2 | | | | | | 0 | + * ------------------------------------------------- + */ + LAYOUT( + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_RBRC, + KC_TRNS, DF(0), DF(1), XXXXXXX, XXXXXXX, MO(3), KC_4, KC_4, KC_5, KC_6, KC_MINS, KC_EQL, + KC_TRNS, MO(5), XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_1, KC_1, KC_2, KC_3, KC_BSLS, KC_TRNS, + TG(2), KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_0, KC_TRNS, KC_TRNS, KC_TRNS + ), + +/* Layer 3 + * ------------------------------------------------- ------------------------------------------------- + * | | F1 | F2 | F3 | F4 | F5 | | F6 | F7 | F8 | F9 | F10 | XXX | + * ------------------------------------------------- ------------------------------------------------- + * | | XXX | XXX | XXX | XXX | MO3 | | F4 | F4 | F5 | F6 | XXX | XXX | + * ------------------------------------------------- ------------------------------------------------- + * | | XXX | XXX | XXX | XXX | XXX | | F1 | F1 | F2 | F3 | XXX | | + * ----------------------------------------------------------------------------------------------------------------- + * TG3 | | | | F10 | F11 | F12 | + * ------------------------------------------------- + */ + LAYOUT( + KC_TRNS, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, XXXXXXX, + KC_TRNS, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, MO(3), KC_F4, KC_F4, KC_F5, KC_F6, XXXXXXX, XXXXXXX, + KC_TRNS, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_F1, KC_F1, KC_F2, KC_F3, XXXXXXX, KC_TRNS, + TG(3), KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_F10, KC_F11, KC_F12, KC_TRNS, KC_TRNS, KC_TRNS + ), + +/* Layer 4 + * ------------------------------------------------- ------------------------------------------------- + * | | Esc | Tab x | Tab n |CPg Dn |CPg Dn | |Pg Down| Home |^ Arrow|Insert |SInsert| Esc | + * ------------------------------------------------- ------------------------------------------------- + * | | Caps | < Gui |Gui Tab| 💥 | 💥 | |< Arrow|< Arrow|v Arrow|> Arrow| End |Pr Scr | + * ------------------------------------------------- ------------------------------------------------- + * | | XXX | XXX | XXX |CPg Up |CPg Up | | Pg Up | XXX |v Arrow| XXX | App | | + * ----------------------------------------------------------------------------------------------------------------- + * TG4 | | | | | | | + * ------------------------------------------------- + */ + LAYOUT( + KC_TRNS, KC_ESC, LCTL(KC_W), LCTL(KC_T), CTL_T(KC_PGDN), CTL_T(KC_PGDN), KC_PGDN, KC_HOME, KC_UP, KC_INS, SFT_T(KC_INS), KC_ESC, + KC_TRNS, KC_CAPS, LGUI_T(KC_RIGHT), LGUI_T(KC_TAB), XXXXXXX, XXXXXXX, KC_LEFT, KC_LEFT, KC_DOWN, KC_RIGHT, KC_END, KC_PSCR, + KC_TRNS, XXXXXXX, XXXXXXX, XXXXXXX, CTL_T(KC_PGUP), CTL_T(KC_PGUP), KC_PGUP, XXXXXXX, KC_DOWN, XXXXXXX, KC_APP, KC_TRNS, + TG(4), KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS + ), + +/* Layer 5 + * ------------------------------------------------- ------------------------------------------------- + * | | XXX |play/ps| Vol + | Vol + | XXX | | XXX | XXX | XXX | XXX |_reset | Power | + * ------------------------------------------------- ------------------------------------------------- + * | | XXX | |<< | Vol 0 | >>| | XXX | | XXX | XXX | XXX | XXX | XXX | Sleep | + * ------------------------------------------------- ------------------------------------------------- + * | | XXX | XXX | Vol - | Vol - | XXX | | XXX | XXX | XXX | XXX | XXX | XXX | + * ----------------------------------------------------------------------------------------------------------------- + * TG5 | | | | | | | + * ------------------------------------------------- + */ + LAYOUT( + KC_TRNS, XXXXXXX, KC_MPLY, KC_VOLU, KC_VOLU, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, RESET, KC_PWR, + KC_TRNS, XXXXXXX, KC_MPRV, KC_MUTE, KC_MNXT, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_SLEP, + KC_TRNS, XXXXXXX, XXXXXXX, KC_VOLD, KC_VOLD, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, + TG(5), KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS + ), + +/* Layer 6 + * ------------------------------------------------- ------------------------------------------------- + * | | acc1 | XXX | XXX | XXX | XXX | |^ Wheel|< Wheel|^ Mouse|> Wheel| XXX | XXX | + * ------------------------------------------------- ------------------------------------------------- + * | | acc2 |Mouse 3|Mouse 2|Mouse 1|Mouse 1| |< Mouse|< Mouse|v Mouse|> Mouse| XXX | XXX | + * ------------------------------------------------- ------------------------------------------------- + * | | acc0 | XXX | XXX | XXX | XXX | |v Wheel| XXX |v Mouse| XXX | XXX | | + * ----------------------------------------------------------------------------------------------------------------- + * TG6 | | | | | | | + * ------------------------------------------------- + */ + LAYOUT( + KC_TRNS, KC_ACL1, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_WH_U, KC_WH_L, KC_MS_U, KC_WH_R, XXXXXXX, XXXXXXX, + KC_TRNS, KC_ACL2, KC_BTN3, KC_BTN2, KC_BTN1, KC_BTN1, KC_MS_L, KC_MS_L, KC_MS_D, KC_MS_R, XXXXXXX, XXXXXXX, + KC_TRNS, KC_ACL0, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_WH_D, XXXXXXX, KC_MS_D, XXXXXXX, XXXXXXX, KC_TRNS, + TG(6), KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS + ) +}; + +/* vi: ft=c:tw=80:sw=2:ts=2:sts=2:et + */ diff --git a/keyboards/signum/3_0/elitec/keymaps/default/km_template.txt b/keyboards/signum/3_0/elitec/keymaps/default/km_template.txt new file mode 100644 index 00000000000..47b35ee5149 --- /dev/null +++ b/keyboards/signum/3_0/elitec/keymaps/default/km_template.txt @@ -0,0 +1,20 @@ +/* keymap.c is auto-generated, don't edit it directly. + * Further instructions are provided in readme.md */ + +#include QMK_KEYBOARD_H + +enum unicode_name { +// +}; + +const uint32_t PROGMEM unicode_map[] = { +// +}; + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + +// +}; + +/* vi: ft=c:tw=80:sw=2:ts=2:sts=2:et + */ diff --git a/keyboards/signum/3_0/elitec/keymaps/default/layout.py b/keyboards/signum/3_0/elitec/keymaps/default/layout.py new file mode 100644 index 00000000000..937fc172ce7 --- /dev/null +++ b/keyboards/signum/3_0/elitec/keymaps/default/layout.py @@ -0,0 +1,493 @@ +from sortedcontainers import SortedDict + +# Add all used Unicode symbols to this list. +# The key (e.g. "SNEK") is used in keymap.c for "enum", "unicode_map" and "keymaps", so it needs to be a valid C variable name. +# The key is also used in this file to define the layout, so use recognizeable names. +# The value (e.g. "0x1f40d") is used in keymap.c for "unicode_map" and to automatically generate the "ASCII"-art comments. +# When adding new Unicode names, use "0x1f40d" until you looked up the correct Unicode code point. +uc_dict = SortedDict({ + "SNEK": "0x1f40d", ## Error + ## qwertz + "ACUTE": "0x00b4", + ## QWERTZ + "INV_EXCL": "0x00a1", + "INV_QST": "0x00bf", + ## numpad + "SUP1": "0x00b9", + "SUP2": "0x00b2", + "SUP3": "0x00b3", + "SUP_MIN": "0x207b", + "ROOT": "0x221a", + "DEGREE": "0x00b0", + "MINUTE": "0x02b9", + "SECOND": "0x02ba", + "CURRENCY": "0x00a4", + "CENT": "0x00a2", + "YEN": "0x00a5", + "POUND": "0x00a3", + "EURO": "0x20ac", + "DIVISION": "0x00f7", + "MICRO": "0x00b5", + "OHM": "0x2126", + "BITCOIN": "0x20bf", + "SECTION": "0x00a7", + ## NAV_TYPO + "SQT1": "0x203a", + "SQT2": "0x201a", + "SQT3": "0x2018", + "SQT4": "0x2019", + "SQT5": "0x2039", + "SUP_A": "0x00aa", + "SUP_O": "0x00ba", + "TMARK": "0x2122", + "COPYR": "0x00a9", + "REGTM": "0x00ae", + "DOTS": "0x2026", + "CROSS": "0x2020", + "BULLET": "0x2022", + "EMDASH": "0x2014", + "PERMIL": "0x2030", + "DQT1": "0x00bb", + "DQT2": "0x201e", + "DQT3": "0x201c", + "DQT4": "0x201d", + "DQT5": "0x00ab", + ## lang + "ae": "0x00e4", + "oe": "0x00f6", + "ue": "0x00fc", + "sz": "0x00df", + "n_tilde": "0x00f1", + ## LANG + "AE": "0x00c4", + "OE": "0x00d6", + "UE": "0x00dc", + "SZ": "0x1e9e", + "N_TILDE": "0x00d1", + ## greek + "alpha": "0x03b1", + "beta": "0x03b2", + "gamma": "0x03b3", + "delta": "0x03b4", + "epsilon": "0x03b5", + "zeta": "0x03b6", + "eta": "0x03b7", + "theta": "0x03b8", + "iota": "0x03b9", + "kappa": "0x03ba", + "lambda": "0x03bb", + "my": "0x03bc", + "ny": "0x03bd", + "xi": "0x03be", + "omikron": "0x03bf", + "pi": "0x03c0", + "rho": "0x03c1", + "sigma": "0x03c3", + "tau": "0x03c4", + "ypsilon": "0x03c5", + "phi": "0x03c6", + "chi": "0x03c7", + "psi": "0x03c8", + "omega": "0x03c9", + # variants + "beta2": "0x03d0", + "epsi2": "0x03f5", + "theta2": "0x03d1", + "kappa2": "0x03f0", + "pi2": "0x03d6", + "rho2": "0x03f1", + "sigma2": "0x03c2", + "sigma3": "0x03f2", + "phi2": "0x03d5", + # non-standard + "digamma": "0x03dd", + "stigma": "0x03db", + "heta": "0x0371", + "san": "0x03fb", + "koppa": "0x03d9", + "sampi": "0x0373", + "scho": "0x03f8", + ## GREEK + "ALPHA": "0x0391", + "BETA": "0x0392", + "GAMMA": "0x0393", + "DELTA": "0x0394", + "EPSILON": "0x0395", + "ZETA": "0x0396", + "ETA": "0x0397", + "THETA": "0x0398", + "IOTA": "0x0399", + "KAPPA": "0x039a", + "LAMBDA": "0x039b", + "MY": "0x039c", + "NY": "0x039d", + "XI": "0x039e", + "OMIKRON": "0x039f", + "PI": "0x03a0", + "RHO": "0x03a1", + "SIGMA": "0x03a3", + "TAU": "0x03a4", + "YPSILON": "0x03a5", + "PHI": "0x03a6", + "CHI": "0x03a7", + "PSI": "0x03a8", + "OMEGA": "0x03a9", + # variants + "YPSI2": "0x03d2", + # non-standard + "DIGAMMA": "0x03dc", + "STIGMA": "0x03da", + "HETA": "0x0370", + "SAN": "0x03fa", + "KOPPA": "0x03d8", + "SAMPI": "0x0372", + "SCHO": "0x03f7", + ## symbol + "SHOGI_WD": "0x26c9", + "FLAG_W": "0x2690", + "LETTER": "0x2709", + "PHONE": "0x2706", + "INFO": "0x1f6c8", + "REWIND": "0x23ee", + "PLAY": "0x23ef", + "FORWARD": "0x23ed", + "STOP": "0x25fc", + "EJECT": "0x23cf", + "SHOGI_W": "0x2616", + "FEMALE": "0x2640", + "MALE": "0x2642", + "NO": "0x2717", + "YES": "0x2713", + "FLAT": "0x266d", + "NATURAL": "0x266e", + "SHARP": "0x266f", + "COMMON_T": "0x1d134", + "ALLA_BR": "0x1d135", + "PAWN_W": "0x2659", + "DIAMS_W": "0x2662", + "HEARTS_W": "0x2661", + "SPADES_W": "0x2664", + "CLUBS_W": "0x2667", + "WHOLE_N": "0x1d15d", + "HALF_N": "0x1d15e", + "QUART_N": "0x1d15f", + "EIGHTH_N": "0x1d160", + "SIXT_N": "0x1d161", + "ROOK_W": "0x2656", + "KNIGHT_W": "0x2658", + "BISHOP_W": "0x2657", + "QUEEN_W": "0x2655", + "KING_W": "0x2654", + "C_CLEF": "0x1d121", + "G_CLEF": "0x1d11e", + "F_CLEF": "0x1d122", + "PEDAL": "0x1d1ae", + "PEDAL_UP": "0x1d1af", + ## SYMBOL + "SHOGI_BD": "0x26ca", + "FLAG_B": "0x2691", + "SPEAKER_UP": "0x1f50a", + "SPEAKER_TG": "0x1f507", + "SPEAKER_DN": "0x1f509", + "SHOGI_B": "0x2617", + "KEY": "0x1f511", + "LOCK": "0x1f512", + "LOCK_OPEN": "0x1f513", + "STAFF": "0x1d11a", + "BARLINE": "0x1d100", + "BARLINE_D": "0x1d101", + "BARLINE_FIN": "0x1d102", + "CODA": "0x1d10c", + "PAWN_B": "0x265f", + "DIAMS_B": "0x2666", + "HEARTS_B": "0x2665", + "SPADES_B": "0x2660", + "CLUBS_B": "0x2663", + "WHOLE_P": "0x1d13b", + "HALF_P": "0x1d13c", + "QUART_P": "0x1d13d", + "EIGHTH_P": "0x1d13e", + "SIXT_P": "0x1d13f", + "ROOK_B": "0x265c", + "KNIGHT_B": "0x265e", + "BISHOP_B": "0x265d", + "QUEEN_B": "0x265b", + "KING_B": "0x265a", + "REPEAT_S": "0x1d106", + "REPEAT_E": "0x1d107", + "SEGNO": "0x1d10b", + "DALSEGNO": "0x1d109", + "DACAPO": "0x1d10a", + ## math + "EXISTS": "0x2203", + "FORALL": "0x2200", + "EQUIV": "0x2261", + "CORRESP": "0x2259", + "INEQUAL": "0x2260", + "DEFINE": "0x2254", + "TO": "0x27f6", + "MAPSTO": "0x27fc", + "SETMINUS": "0x2216", + "QED": "0x220e", + "OR_": "0x22c1", + "AND_": "0x22c0", + "OR": "0x2228", + "AND": "0x2227", + "NOT": "0x00ac", + "BICOND": "0x21d4", + "IMPL_REV": "0x21d0", + "IMPL": "0x21d2", + "TOP": "0x22a4", + "BOTTOM": "0x22a5", + "SUM_": "0x2211", + "PROD_": "0x220f", + "MDOT": "0x22c5", + "NOTIN": "0x2209", + "IN": "0x2208", + "LS_EQ": "0x2264", + "GR_EQ": "0x2265", + "INFTY": "0x221e", + "UNION_": "0x22c3", + "INTERS_": "0x22c2", + "UNION": "0x222a", + "INTERS": "0x2229", + "NOTSUBS": "0x2288", + "PR_SUBSET": "0x2282", + "SUBSET": "0x2286", + "SUBSET_REV": "0x2287", + "EMPTYSET": "0x2205", + ## MATHSCRIPT + "LEFT_CEIL": "0x2308", + "REAL_P": "0x211c", + "NABLA": "0x2207", + "RIGHT_CEIL": "0x2309", + "LEFT_FLOOR": "0x230a", + "BRA": "0x27e8", + "IMAG_P": "0x2111", + "KET": "0x27e9", + "RIGHT_FLOOR": "0x230b", + "Q_SET": "0x211a", + "e_FUN": "0x0065", + "R_SET": "0x211d", + "Z_SET": "0x2124", + "U_SET": "0x1d54c", + "i_UNIT": "0x0069", + "BIG_O": "0x1d4aa", + "POWERSET": "0x1d4ab", + "A_SET": "0x1d538", + "INTEGRAL": "0x222b", + "PARTIAL": "0x2202", + "F_SET": "0x1d53d", + "H_SET": "0x210d", + "K_SET": "0x1d542", + "LENGTH": "0x2113", + "ALEPH": "0x2135", + "BETH": "0x2136", + "C_SET": "0x2102", + "B_SET": "0x1d539", + "N_SET": "0x2115", + "INDICATOR": "0x1d7cf", + "FOURIER": "0x2131", + "HAMILTON": "0x210b", + "LAPLACE": "0x2112", + ## MATHEXT + "RIGHT_TACK": "0x22a2", + "MODELS": "0x22a7", + "AB_VEC": "0x20d7", + "AB_LINE": "0x0305", + "AB_ARC": "0x0361", + "LESS_LESS": "0x226a", + "PRED": "0x227a", + "EMBED": "0x21aa", + "SUCC": "0x227b", + "GREAT_GREAT": "0x226b", + "TRIANGLE": "0x25b3", + "SQUARE": "0x25a1", + "CIRCLE": "0x25cb", + "DOT_OP": "0x2299", + "PLUS_OP": "0x2295", + "MINUS_OP": "0x2296", + "ROUGHLY": "0x2248", + "ISOMORPH": "0x2245", + "LTIMES": "0x22c9", + "RTIMES": "0x22ca", + "BOWTIE": "0x22c8", + "M_ANGLE": "0x2221", + "ANGLE": "0x2220", + "CIRC_MID": "0x2218", + "AST_MID": "0x2217", + "TIMES": "0x00d7", + "PLUS_MINUS": "0x00b1", + "MINUS_PLUS": "0x2213", + "LEFT_OUTER": "0x27d5", + "RIGHT_OUTER": "0x27d6", + "FULL_OUTER": "0x27d7", + "SQ_LS": "0x228f", + "SQ_LS_EQ": "0x2291", + "PROP_TO": "0x221d", + "PARALLEL": "0x2225", + "NOT_PARA": "0x2226", + "TIMES_OP": "0x2297", + "NOT_DIV": "0x2224" +}) + +# Add all used Keycodes to this list. +# The key (e.g. "a") is used in keymap.c to automatically generate the comments. The first 7 chars will show as a keycap legend. +qmk_dict = { + # test cases (These are handled in generate_km.py within toKC() and toLgd(), so these definitions will be ignored. + # If you find "BAD" in your keymaps, then something went wrong.) + "a": "BAD", "A": "BAD", "0": "BAD", + # Basic Keycodes + "XXX": "XXXXXXX", "": "KC_TRNS", + "!": "S(KC_1)", "@": "S(KC_2)", "#": "S(KC_3)", "$": "S(KC_4)", "%": "S(KC_5)", + "^": "S(KC_6)", "&": "S(KC_7)", "*": "S(KC_8)", "(": "S(KC_9)", ")": "S(KC_0)", + "Enter": "KC_ENT", "Esc": "KC_ESC", "BSpace": "KC_BSPC", "Tab": "KC_TAB", + "Space": "KC_SPC", "-": "KC_MINS", "_": "S(KC_MINS)", "=": "KC_EQL", + "+": "S(KC_EQL)", "[": "KC_LBRC", "{": "S(KC_LBRC)", "]": "KC_RBRC", + "}": "S(KC_RBRC)", "\\": "KC_BSLS", "|": "S(KC_BSLS)", ";": "KC_SCLN", + ":": "S(KC_SCLN)", "'": "KC_QUOT", "\"": "S(KC_QUOT)", "`": "KC_GRV", + "~": "S(KC_GRV)", ",": "KC_COMM", "<": "S(KC_COMM)", ".": "KC_DOT", + ">": "S(KC_DOT)", "/": "KC_SLSH", "?": "S(KC_SLSH)", "Caps": "KC_CAPS", + "Pr Scr": "KC_PSCR", "Scr Lck": "KC_SLCK", "Pause": "KC_BRK", "Insert": "KC_INS", "SInsert": "SFT_T(KC_INS)", + "Home": "KC_HOME", "Pg Up": "KC_PGUP", "Del": "KC_DEL", "End": "KC_END", + "Pg Down": "KC_PGDN", "> Arrow": "KC_RIGHT", "< Arrow": "KC_LEFT", + "v Arrow": "KC_DOWN", "^ Arrow": "KC_UP", + # Keypad keycodes missing + "App": "KC_APP", "Menu": "KC_MENU", + # Command keycodes missing (Execute, Help, ..., Find) + # Basic Keycodes missing from Print Screen onwards, included as fallback + # random Keycodes + "RGui": "KC_RGUI", "LGui": "KC_LGUI", "LAlt": "KC_LALT", "RAlt": "KC_RALT", "LShift": "KC_LSFT", "LCtrl": "KC_LCTRL", "RCtrl": "KC_RCTRL", + "LShift(": "KC_LSPO", "RShift)": "KC_RSPC", + "L1_ENT": "LT(1, KC_ENT)", "LT6_SPC": "LT(6, KC_SPC)", + "CPg Dn": "CTL_T(KC_PGDN)", "CPg Up": "CTL_T(KC_PGUP)", + "S_Enter": "S(KC_ENT)", "S_Tab": "S(KC_TAB)", "Compose": "KC_ALGR", + "RShift": "KC_RSFT", + "Vol 0": "KC_MUTE", "Vol +": "KC_VOLU", "Vol -": "KC_VOLD", + ">>|": "KC_MNXT", "|<<": "KC_MPRV", "play/ps": "KC_MPLY", + "Bri +": "KC_BRIU", "Bri -": "KC_BRID", + # Quantum Keycodes + "_reset": "RESET", "_debug": "DEBUG", "_eep_re": "EEP_RST", + # Audio Keys missing + # Backlighting + "Led 0": "BL_TOGG", "Led +": "BL_INC", "Led -": "BL_DEC", "Led ~": "BL_BRTG", + # Bootmagic missing + # Bluetooth + "OUT_AUTO": "OUT_AUTO", "OUT_USB": "OUT_USB", "OUT_BT": "OUT_BT", + # Layer Switching missing, Lx -> MO(x), Tx -> TG(x) + "qwertz": "DF(0)", "neo": "DF(2)", + # Mouse Keys + "^ Mouse": "KC_MS_U", "v Mouse": "KC_MS_D", "< Mouse": "KC_MS_L", + "> Mouse": "KC_MS_R", "Mouse 1": "KC_BTN1", "Mouse 2": "KC_BTN2", + "Mouse 3": "KC_BTN3", "Mouse 4": "KC_BTN4", "Mouse 5": "KC_BTN5", + "^ Wheel": "KC_WH_U", "v Wheel": "KC_WH_D", "< Wheel": "KC_WH_L", + "> Wheel": "KC_WH_R", "acc0": "KC_ACL0", "acc1": "KC_ACL1", + "acc2": "KC_ACL2", + # Modifiers missinng, add entry for each specific application + # Mod-Tap Keys missing, add entry for each specific application + "_Sh_swp": "LSFT_T(SH_TG)", + # RGB Lighting missing + # RGB Matrix Lighting missing + # Thermal Printer missing + # US ANSI Shifted Symbols done via S(), don't add KC_entries + # One Shot Keys missing + # Swap Hands + "_sp_swp": "SHT(KC_SPC)", + # Unicode support (via X()) included implicitly + # Switching Unicode Input Modes + "UC_win": "UC_M_WC", "UC_lnx": "UC_M_LN", "UC_osx": "UC_M_OS", + + # custom keys + "altF4": "LALT(KC_F4)", + "Undo": "LCTL(KC_Z)", "Cut": "LCTL(KC_X)", "Copy": "LCTL(KC_C)", "Paste": "LCTL(KC_V)", + "< Tab": "LCTL(S(KC_TAB))", "> Tab": "LCTL(KC_TAB)", + "Tab x": "LCTL(KC_W)", "Tab n": "LCTL(KC_T)", + "Gui Tab": "LGUI_T(KC_TAB)", "< Gui": "LGUI_T(KC_LEFT)", "< Gui": "LGUI_T(KC_RIGHT)", + "C+A+Del": "LCTL(LALT(KC_DEL))", "Mic 0": "LCTL(KC_M)", + "Power": "KC_PWR", "Sleep": "KC_SLEP", + + # macros + "Macro 1": "KC_1", "Macro 2": "KC_2", "Macro 3": "KC_3", "Macro 4": "KC_4", "Macro 5": "KC_5", + + # custom layers + "GREEK": "GREEK", + "SYMBOL": "SYMBOL", + "MATH": "MATH", + "GAME": "GAME", + "MOUSE": "MOUSE", + "NEO": "TG(2)" +} + +# These keys are repeated in all layers. +# Generate a keymap.c with the python script and refer to the "ASCII"-art comments, to see which positions this concerns. +# If you want to put different keycodes in these positions for different layers, you need to modify the python script by yourself. +static = ["NEO", "GREEK", "GREEK", "GREEK", "GREEK", "MOUSE"] + +# mutex_layers = {"GREEK": 8, "GAME": 10, "MOUSE": 11} +# layer_graph = ... + +# 0 +qwerty = [ + ["Tab", "q", "w", "e", "r", "t", "y", "u", "i", "o", "p", "["], + ["LCtrl", "a", "s", "d", "f", "g", "h", "j", "k", "l", ";", "'"], + ["LShift(", "z", "x", "c", "v", "b", "n", "m", ",", ".", "/", "RShift)"], + ["MO2", "LGui", "LAlt", "TT2", "LT6_SPC", "TT4", "Enter", "Space", "TT2", "RAlt", "RGui", "RCtrl"], + ] + +# 1 +colemak = [ + ["Tab", "q", "w", "f", "p", "g", "j", "l", "u", "y", ";", "["], + ["LCtrl", "a", "r", "s", "t", "d", "h", "n", "e", "i", "o", "'"], + ["LShift(", "z", "x", "c", "v", "b", "k", "m", ",", ".", "/", "RShift)"], + ["MO2", "LGui", "LAlt", "TT2", "LT6_SPC", "TT4", "Enter", "Space", "TT2", "RAlt", "RGui", "RCtrl"], + ] + +# 2 +numpad = [ + ["`", "1", "2", "3", "4", "5", "6", "7", "8", "9", "0", "]"], + ["", "DF0", "DF1", "XXX", "XXX", "MO3", "4", "4", "5", "6", "-", "="], + ["", "MO5", "XXX", "XXX", "XXX", "XXX", "1", "1", "2", "3", "\\", ""], + ["TG2", "", "", "", "", "", "", "", "0", "", "", ""], + ] + +# 3 +fpad = [ + ["", "F1", "F2", "F3", "F4", "F5", "F6", "F7", "F8", "F9", "F10", "XXX"], + ["", "XXX", "XXX", "XXX", "XXX", "MO3", "F4", "F4", "F5", "F6", "XXX", "XXX"], + ["", "XXX", "XXX", "XXX", "XXX", "XXX", "F1", "F1", "F2", "F3", "XXX", ""], + ["TG3", "", "", "", "", "", "F10", "F11", "F12", "", "", ""], + ] + +# 4 +movement = [ + ["", "Esc", "Tab x", "Tab n", "CPg Dn", "CPg Dn", "Pg Down", "Home", "^ Arrow", "Insert", "SInsert", "Esc"], + ["", "Caps", "< Gui", "Gui Tab", "> Gui", "> Gui", "< Arrow", "< Arrow", "v Arrow", "> Arrow", "End", "Pr Scr"], + ["", "XXX", "XXX", "XXX", "CPg Up", "CPg Up", "Pg Up", "XXX", "v Arrow", "XXX", "App", ""], + ["TG4", "", "", "", "", "", "", "", "", "", "", ""], + ] + +# 5 +media = [ + ["", "XXX", "play/ps", "Vol +", "Vol +", "XXX", "XXX", "XXX", "XXX", "XXX", "_reset", "Power"], + ["", "XXX", "|<<", "Vol 0", ">>|", "XXX", "XXX", "XXX", "XXX", "XXX", "XXX", "Sleep"], + ["", "XXX", "XXX", "Vol -", "Vol -", "XXX", "XXX", "XXX", "XXX", "XXX", "XXX", "XXX"], + ["TG5", "", "", "", "", "", "", "", "", "", "", ""], + ] + +# 6 +mouse = [ + ["", "acc1", "XXX", "XXX", "XXX", "XXX", "^ Wheel", "< Wheel", "^ Mouse", "> Wheel", "XXX", "XXX"], + ["", "acc2", "Mouse 3", "Mouse 2", "Mouse 1", "Mouse 1", "< Mouse", "< Mouse", "v Mouse", "> Mouse", "XXX", "XXX"], + ["", "acc0", "XXX", "XXX", "XXX", "XXX", "v Wheel", "XXX", "v Mouse", "XXX", "XXX", ""], + ["TG6", "", "", "", "", "", "", "", "", "", "", ""], + ] + +layers = [ + qwerty, + colemak, + numpad, + fpad, + movement, + media, + mouse + ] diff --git a/keyboards/signum/3_0/elitec/keymaps/default/readme.md b/keyboards/signum/3_0/elitec/keymaps/default/readme.md new file mode 100644 index 00000000000..efd43a9bf9e --- /dev/null +++ b/keyboards/signum/3_0/elitec/keymaps/default/readme.md @@ -0,0 +1,27 @@ +# Default layout + +Layout created by: [Jan Christoph Ebersbach](https://github.com/jceb) + +The `generate_km.py` file automatically generates `keymap.c` with +additional comments that visually represent the layout. + +This layout is maintained as I am using it. You can also use it as a +starting point to create your own layouts for the Signum 3.0 with +`km_template.txt` and `generate_km.py`. + +# Customization + +- Install `python3` and [Sorted Containers + Library](http://www.grantjenks.com/docs/sortedcontainers/), `pip + install sortedcontainers`. + +- Customize `layout.py` to your liking. + - Attention 1: keycodes are either translated into symbols and + function calls via the `translate()` function in `generate_km.py` + or via user-defined mappings in the dictionary `qmk_dict` in + `layout.py`. Especially the latter might require adjustment for + uncommon qmk features + - Attention 2: additional C functions need to be put into + `km_template.txt` + +Run `./generate_km.py` to regenerate `keymap.c`. diff --git a/keyboards/signum/3_0/elitec/readme.md b/keyboards/signum/3_0/elitec/readme.md new file mode 100644 index 00000000000..f60023f6d57 --- /dev/null +++ b/keyboards/signum/3_0/elitec/readme.md @@ -0,0 +1,14 @@ +# Signum 3.0 + +![Signum 3.0 Top](https://i.redd.it/vl54yl36bpz11.jpg) + +An ergonomic 40% PCB. + +Keyboard Maintainer: [Troy Fletcher](http://troyfletcher.net/) +Hardware available here: [Troy Fletcher](http://troyfletcher.net/keyboard_sales.html) + +Make example for this keyboard (after setting up your build environment): + + make signum/3_0/elitec:default + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/signum/3_0/elitec/rules.mk b/keyboards/signum/3_0/elitec/rules.mk new file mode 100644 index 00000000000..d2f987b2029 --- /dev/null +++ b/keyboards/signum/3_0/elitec/rules.mk @@ -0,0 +1,62 @@ +# MCU name +MCU = atmega32u4 + +# Processor frequency. +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to +# calculate timings. Do NOT tack on a 'UL' at the end, this will be done +# automatically to create a 32-bit value in your source code. +# +# This will be an integer division of F_USB below, as it is sourced by +# F_USB after it has run through any CPU prescalers. Note that this value +# does not *change* the processor frequency - it should merely be updated to +# reflect the processor speed set externally so that the code can use accurate +# software delays. +F_CPU = 16000000 + +# +# LUFA specific +# +# Target architecture (see library "Board Types" documentation). +ARCH = AVR8 + +# Input clock frequency. +# This will define a symbol, F_USB, in all source code files equal to the +# input clock frequency (before any prescaling is performed) in Hz. This value may +# differ from F_CPU if prescaling is used on the latter, and is required as the +# raw input clock is fed directly to the PLL sections of the AVR for high speed +# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' +# at the end, this will be done automatically to create a 32-bit value in your +# source code. +# +# If no clock division is performed on the input clock inside the AVR (via the +# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. +F_USB = $(F_CPU) + +# Interrupt driven control endpoint task(+60) +OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT + +# Boot Section Size in *bytes* +OPT_DEFS += -DBOOTLOADER_SIZE=4096 + +# Bootloader +# This definition is optional, and if your keyboard supports multiple bootloaders of +# different sizes, comment this out, and the correct address will be loaded +# automatically (+60). See bootloader.mk for all options. +BOOTLOADER = atmel-dfu + +# Build Options +# comment out to disable the options. +# +BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = yes # Mouse keys(+4700) +EXTRAKEY_ENABLE = yes # Audio control and System control(+450) +CONSOLE_ENABLE = no # Console for debug(+400) +COMMAND_ENABLE = no # Commands for debug and configuration +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend +NKRO_ENABLE = yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +AUDIO_ENABLE = no +RGBLIGHT_ENABLE = no + +UNICODEMAP_ENABLE = yes From 95ebe9018514b4ff7c06fc7dec1bf302a36474f2 Mon Sep 17 00:00:00 2001 From: fauxpark Date: Mon, 8 Apr 2019 12:32:12 +1000 Subject: [PATCH 054/171] [Keymap] Change SFT_ESC keycode in default Satan keymap to KC_GESC (#5482) --- keyboards/satan/keymaps/default/keymap.c | 34 +----------------------- 1 file changed, 1 insertion(+), 33 deletions(-) diff --git a/keyboards/satan/keymaps/default/keymap.c b/keyboards/satan/keymaps/default/keymap.c index 2dec5464ccf..77c1b5005c2 100644 --- a/keyboards/satan/keymaps/default/keymap.c +++ b/keyboards/satan/keymaps/default/keymap.c @@ -1,9 +1,5 @@ #include QMK_KEYBOARD_H -enum custom_keycodes { - SFT_ESC = SAFE_RANGE -}; - // Each layer gets a name for readability, which is then used in the keymap matrix below. // The underscores don't mean anything - you can have a layer called STUFF or any other name. // Layer names don't all need to be of the same length, obviously, and you can also skip them @@ -28,7 +24,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { * `-----------------------------------------------------------' */ [_BL] = LAYOUT_60_ansi( - SFT_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, \ + KC_GESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, \ KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, \ KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, \ KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, \ @@ -56,31 +52,3 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { _______, _______, _______, _______, _______, _______, _______, _______ ) }; - -bool process_record_user(uint16_t keycode, keyrecord_t *record) { - switch (keycode) { - case SFT_ESC: - if (record->event.pressed) { - if (get_mods() & MOD_MASK_SHIFT) { - add_key(KC_GRV); - send_keyboard_report(); - } else { - add_key(KC_ESC); - send_keyboard_report(); - } - } else { - if (get_mods() & MOD_MASK_SHIFT) { - del_key(KC_GRV); - send_keyboard_report(); - } else { - del_key(KC_ESC); - send_keyboard_report(); - } - } - - return false; - - default: - return true; - } -} From f44483f6aa381f6caa9cbf7a57bd6ba73bad8ae9 Mon Sep 17 00:00:00 2001 From: That-Canadian Date: Mon, 8 Apr 2019 00:05:32 -0400 Subject: [PATCH 055/171] Adding the Waldo PCB (PCB for the Holz keyboard) (#4817) * Added Waldo keyboard base files and default keymap * Updated Waldo files and added keymap for split shift and split backspace * Updated meta-data for the Waldo board * Apply suggestions from code review Committing suggestions for real this time. Co-Authored-By: That-Canadian * Made suggested changes that were not explicitly made. --- keyboards/waldo/config.h | 80 ++++++++++ keyboards/waldo/keymaps/default/config.h | 5 + keyboards/waldo/keymaps/default/keymap.c | 148 ++++++++++++++++++ keyboards/waldo/keymaps/default/readme.md | 2 + keyboards/waldo/keymaps/default/rules.mk | 0 .../keymaps/default_split_shft_bck/config.h | 5 + .../keymaps/default_split_shft_bck/keymap.c | 97 ++++++++++++ .../keymaps/default_split_shft_bck/readme.md | 2 + .../keymaps/default_split_shft_bck/rules.mk | 0 keyboards/waldo/readme.md | 13 ++ keyboards/waldo/rev1/config.h | 7 + keyboards/waldo/rev1/info.json | 3 + keyboards/waldo/rev1/rules.mk | 1 + keyboards/waldo/rules.mk | 67 ++++++++ keyboards/waldo/waldo.c | 1 + keyboards/waldo/waldo.h | 51 ++++++ 16 files changed, 482 insertions(+) create mode 100644 keyboards/waldo/config.h create mode 100644 keyboards/waldo/keymaps/default/config.h create mode 100644 keyboards/waldo/keymaps/default/keymap.c create mode 100644 keyboards/waldo/keymaps/default/readme.md create mode 100644 keyboards/waldo/keymaps/default/rules.mk create mode 100644 keyboards/waldo/keymaps/default_split_shft_bck/config.h create mode 100644 keyboards/waldo/keymaps/default_split_shft_bck/keymap.c create mode 100644 keyboards/waldo/keymaps/default_split_shft_bck/readme.md create mode 100644 keyboards/waldo/keymaps/default_split_shft_bck/rules.mk create mode 100644 keyboards/waldo/readme.md create mode 100644 keyboards/waldo/rev1/config.h create mode 100644 keyboards/waldo/rev1/info.json create mode 100644 keyboards/waldo/rev1/rules.mk create mode 100644 keyboards/waldo/rules.mk create mode 100644 keyboards/waldo/waldo.c create mode 100644 keyboards/waldo/waldo.h diff --git a/keyboards/waldo/config.h b/keyboards/waldo/config.h new file mode 100644 index 00000000000..4f7699ace4a --- /dev/null +++ b/keyboards/waldo/config.h @@ -0,0 +1,80 @@ +/* +Copyright 2012 Jun Wako + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#ifndef CONFIG_H +#define CONFIG_H + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0xFEED +#define PRODUCT_ID 0x6060 +#define MANUFACTURER Greenwald Designs +#define PRODUCT Waldo +#define DESCRIPTION A 60% board + +/* key matrix size */ +#define MATRIX_ROWS 5 +#define MATRIX_COLS 15 + +/* Planck PCB default pin-out */ +#define MATRIX_ROW_PINS { F0, F1, F4, F5, F6 } +#define MATRIX_COL_PINS { F7, D5, D3, D2, B3, B2, C7, C6, B6, B5, B4, D7, D6, D4, B1 } +#define UNUSED_PINS + +#define BACKLIGHT_PIN B7 + +/* COL2ROW or ROW2COL */ +#define DIODE_DIRECTION COL2ROW + +/* define if matrix has ghost */ +//#define MATRIX_HAS_GHOST + +/* number of backlight levels */ +#define BACKLIGHT_LEVELS 3 + +/* Set 0 if debouncing isn't needed */ +#define DEBOUNCING_DELAY 5 + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +#define LOCKING_SUPPORT_ENABLE +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE + +/* + * Feature disable options + * These options are also useful to firmware size reduction. + */ + +/* disable debug print */ +//#define NO_DEBUG + +/* disable print */ +//#define NO_PRINT + +/* disable action features */ +//#define NO_ACTION_LAYER +//#define NO_ACTION_TAPPING +//#define NO_ACTION_ONESHOT +//#define NO_ACTION_MACRO +//#define NO_ACTION_FUNCTION + +// RGB LED +#define RGB_DI_PIN B0 // The pin the LED strip is connected to +#define RGBLED_NUM 10 // Number of LEDs in your strip + +#endif diff --git a/keyboards/waldo/keymaps/default/config.h b/keyboards/waldo/keymaps/default/config.h new file mode 100644 index 00000000000..19a485296eb --- /dev/null +++ b/keyboards/waldo/keymaps/default/config.h @@ -0,0 +1,5 @@ +#ifndef CONFIG_USER_H +#define CONFIG_USER_H + + +#endif diff --git a/keyboards/waldo/keymaps/default/keymap.c b/keyboards/waldo/keymaps/default/keymap.c new file mode 100644 index 00000000000..8a9aa15410a --- /dev/null +++ b/keyboards/waldo/keymaps/default/keymap.c @@ -0,0 +1,148 @@ +/* Copyright 2015-2017 Jack Humbert + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#include QMK_KEYBOARD_H + +extern keymap_config_t keymap_config; + +enum waldo_layers { + _QWERTY, + _COLEMAK, + _DVORAK, + _FUNCTION +}; + +enum waldo_keycodes { + QWERTY = SAFE_RANGE, + COLEMAK, + DVORAK, + BACKLIT +}; + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + +/* Qwerty + * ,------------------------------------------------------------------------------------------. + * | Esc | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | - | = | Backspace | + * |------+-----+-----+-----+-----+-----+-----+-----+-----+-----+-----+-----+-----+-----+-----| + * | Tab | Q | W | E | R | T | Y | U | I | O | P | [ | ] | \ | + * |------+-----+-----+-----+-----+-----+-----+-----+-----+-----+-----+-----+-----+-----+-----| + * | Caps | A | S | D | F | G | H | J | K | L | ; | ' | Enter | + * |------+-----+-----+-----+-----+-----+-----+-----+-----+-----+-----+-----+-----+-----+-----| + * | L Shift | Z | X | C | V | B | N | M | , | . | / | R Shift | + * |------+-----+-----+-----+-----+-----+-----+-----+-----+-----+-----+-----+-----+-----+-----| + * | Ctrl | GUI | Alt | Space | Alt | GUI | Menu | Ctrl | + * `------------------------------------------------------------------------------------------' + */ + +[_QWERTY] = LAYOUT_60_ansi( \ + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, \ + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, \ + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, \ + RGB_TOG, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, \ + BACKLIT, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RGUI, KC_F, KC_RCTL \ +), + +/* Colemak + * ,-----------------------------------------------------------------------------------. + * | Tab | Q | W | F | P | G | J | L | U | Y | ; | Bksp | + * |------+------+------+------+------+-------------+------+------+------+------+------| + * | Esc | A | R | S | T | D | H | N | E | I | O | " | + * |------+------+------+------+------+------|------+------+------+------+------+------| + * | Shift| Z | X | C | V | B | K | M | , | . | / |Enter | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | Brite| Ctrl | Alt | GUI |Lower | Space |Raise | Left | Down | Up |Right | + * `-----------------------------------------------------------------------------------' + */ +[_COLEMAK] = LAYOUT_60_ansi( \ + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, \ + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, \ + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, \ + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, \ + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RGUI, KC_MENU, KC_RCTL \ +), + +/* Dvorak + * ,-----------------------------------------------------------------------------------. + * | Tab | " | , | . | P | Y | F | G | C | R | L | Bksp | + * |------+------+------+------+------+-------------+------+------+------+------+------| + * | Esc | A | O | E | U | I | D | H | T | N | S | / | + * |------+------+------+------+------+------|------+------+------+------+------+------| + * | Shift| ; | Q | J | K | X | B | M | W | V | Z |Enter | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | Brite| Ctrl | Alt | GUI |Lower | Space |Raise | Left | Down | Up |Right | + * `-----------------------------------------------------------------------------------' + */ +[_DVORAK] = LAYOUT_60_ansi( \ + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, \ + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, \ + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, \ + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, \ + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RGUI, KC_MENU, KC_RCTL \ +), + +/* Lower + * ,-----------------------------------------------------------------------------------. + * | ~ | ! | @ | # | $ | % | ^ | & | * | ( | ) | Bksp | + * |------+------+------+------+------+-------------+------+------+------+------+------| + * | Del | F1 | F2 | F3 | F4 | F5 | F6 | _ | + | { | } | | | + * |------+------+------+------+------+------|------+------+------+------+------+------| + * | | F7 | F8 | F9 | F10 | F11 | F12 |ISO ~ |ISO | | Home | End | | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | | | | | | | | Next | Vol- | Vol+ | Play | + * `-----------------------------------------------------------------------------------' + */ +[_FUNCTION] = LAYOUT_60_ansi( \ + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, \ + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, \ + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, \ + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, \ + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RGUI, KC_MENU, KC_RCTL \ +) + +}; + +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + switch (keycode) { + case QWERTY: + if (record->event.pressed) { + set_single_persistent_default_layer(_QWERTY); + } + return false; + break; + case COLEMAK: + if (record->event.pressed) { + set_single_persistent_default_layer(_COLEMAK); + } + return false; + break; + case DVORAK: + if (record->event.pressed) { + set_single_persistent_default_layer(_DVORAK); + } + return false; + break; + case BACKLIT: + if (record->event.pressed) { + #ifdef BACKLIGHT_ENABLE + backlight_step(); + #endif + } + return false; + break; + } + return true; +} diff --git a/keyboards/waldo/keymaps/default/readme.md b/keyboards/waldo/keymaps/default/readme.md new file mode 100644 index 00000000000..440961939c8 --- /dev/null +++ b/keyboards/waldo/keymaps/default/readme.md @@ -0,0 +1,2 @@ +# The Default Waldo Layout + diff --git a/keyboards/waldo/keymaps/default/rules.mk b/keyboards/waldo/keymaps/default/rules.mk new file mode 100644 index 00000000000..e69de29bb2d diff --git a/keyboards/waldo/keymaps/default_split_shft_bck/config.h b/keyboards/waldo/keymaps/default_split_shft_bck/config.h new file mode 100644 index 00000000000..19a485296eb --- /dev/null +++ b/keyboards/waldo/keymaps/default_split_shft_bck/config.h @@ -0,0 +1,5 @@ +#ifndef CONFIG_USER_H +#define CONFIG_USER_H + + +#endif diff --git a/keyboards/waldo/keymaps/default_split_shft_bck/keymap.c b/keyboards/waldo/keymaps/default_split_shft_bck/keymap.c new file mode 100644 index 00000000000..4ef7da00191 --- /dev/null +++ b/keyboards/waldo/keymaps/default_split_shft_bck/keymap.c @@ -0,0 +1,97 @@ +/* Copyright 2015-2017 Jack Humbert + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#include QMK_KEYBOARD_H + +extern keymap_config_t keymap_config; + +enum waldo_layers { + _QWERTY, + _FUNC +}; + +enum waldo_keycodes { + QWERTY = SAFE_RANGE, + BACKLIT +}; + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + +/* Qwerty + * ,------------------------------------------------------------------------------------------. + * | Esc | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | - | = | \ | Del | + * |------+-----+-----+-----+-----+-----+-----+-----+-----+-----+-----+-----+-----+-----+-----| + * | Tab | Q | W | E | R | T | Y | U | I | O | P | [ | ] | Backspace | + * |------------------------------------------------------------------------------------------| + * | Control | A | S | D | F | G | H | J | K | L | ; | ' | Enter | + * |------------------------------------------------------------------------------------------| + * | L Shift | Z | X | C | V | B | N | M | , | . | / | R Shift | Fn | + * |------------------------+-----------------------------------------------------------------| + * | Ctrl | GUI | Alt | Space | GUI | Menu | Ctrl | + * `------------------------------------------------------------------------------------------' + */ + +[_QWERTY] = LAYOUT_60_ansi_split_bs_rshift( \ + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSLS, KC_DEL, \ + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSPC, \ + KC_LCTL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, \ + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, MO(_FUNC), \ + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, XXXXXXX, KC_RALT, KC_RGUI, KC_RCTL \ +), + +/* Function + * ,------------------------------------------------------------------------------------------. + * | ~ | F1 | F2 | F3 | F4 | F5 | F6 | F7 | F8 | F9 | F10 | F11 | F12 | | | + * |------+-----+-----+-----+-----+-----+-----+-----+-----+-----+-----+-----+-----+-----+-----| + * | | | Up | | | Vol+| | | Prnt| PgUp|PgDwn| Up | | | + * |------------------------------------------------------------------------------------------| + * | Caps | left| down|right| | Vol-| | | Home| End | left|right| | + * |------------------------------------------------------------------------------------------| + * | |GBTOG|GBMOD|GBHUD|GBHUI|GBSAD|GBSAI|GBVAD|GBVAI| | down| | Fn | + * |------------------------+-----------------------------------------------------------------| + * | Backlit| | | | | | | + * `------------------------------------------------------------------------------------------' + */ + +[_FUNC] = LAYOUT_60_ansi_split_bs_rshift( \ + KC_TILD, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, _______, \ + _______, _______, KC_UP, _______, _______, KC_VOLU, _______, _______, KC_PSCR, KC_PGUP, KC_PGDN, KC_UP, _______, _______, \ + KC_CAPS, KC_LEFT, KC_DOWN, KC_RGHT, _______, KC_VOLD, _______, _______, KC_HOME, KC_END, KC_LEFT, KC_RGHT, _______, \ + _______, RGB_TOG, RGB_MOD, RGB_HUD, RGB_HUI, RGB_SAD, RGB_SAI, RGB_VAD, RGB_VAI, _______, KC_DOWN, _______, KC_TRNS, \ + BACKLIT, _______, _______, _______, XXXXXXX, _______, _______, _______ \ +) + +}; + +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + switch (keycode) { + case QWERTY: + if (record->event.pressed) { + set_single_persistent_default_layer(_QWERTY); + } + return false; + break; + case BACKLIT: + if (record->event.pressed) { + #ifdef BACKLIGHT_ENABLE + backlight_step(); + #endif + } + return false; + break; + } + return true; +} diff --git a/keyboards/waldo/keymaps/default_split_shft_bck/readme.md b/keyboards/waldo/keymaps/default_split_shft_bck/readme.md new file mode 100644 index 00000000000..bb4d32898ee --- /dev/null +++ b/keyboards/waldo/keymaps/default_split_shft_bck/readme.md @@ -0,0 +1,2 @@ +# The Default Waldo Layout w/ Split backspace, split shift, and 7u space + diff --git a/keyboards/waldo/keymaps/default_split_shft_bck/rules.mk b/keyboards/waldo/keymaps/default_split_shft_bck/rules.mk new file mode 100644 index 00000000000..e69de29bb2d diff --git a/keyboards/waldo/readme.md b/keyboards/waldo/readme.md new file mode 100644 index 00000000000..7bc5c882564 --- /dev/null +++ b/keyboards/waldo/readme.md @@ -0,0 +1,13 @@ +Waldo +=== + +A 60% Keyboard for use in the Holz case by Greenwald Designs + +Keyboard Maintainer: TODO +Hardware Availability: TODO + +Make example for this keyboard (after setting up your build environment): + + make waldo/rev1:default + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/waldo/rev1/config.h b/keyboards/waldo/rev1/config.h new file mode 100644 index 00000000000..adf65403654 --- /dev/null +++ b/keyboards/waldo/rev1/config.h @@ -0,0 +1,7 @@ +#ifndef REV5_CONFIG_H +#define REV5_CONFIG_H + + +#define DEVICE_VER 0x0005 + +#endif diff --git a/keyboards/waldo/rev1/info.json b/keyboards/waldo/rev1/info.json new file mode 100644 index 00000000000..3d984961ae4 --- /dev/null +++ b/keyboards/waldo/rev1/info.json @@ -0,0 +1,3 @@ +{ + "identifier": "FEED:6060:0005" +} \ No newline at end of file diff --git a/keyboards/waldo/rev1/rules.mk b/keyboards/waldo/rev1/rules.mk new file mode 100644 index 00000000000..7e64e7edc4f --- /dev/null +++ b/keyboards/waldo/rev1/rules.mk @@ -0,0 +1 @@ +AUDIO_ENABLE = yes # Audio output on port C6 diff --git a/keyboards/waldo/rules.mk b/keyboards/waldo/rules.mk new file mode 100644 index 00000000000..c21ed901376 --- /dev/null +++ b/keyboards/waldo/rules.mk @@ -0,0 +1,67 @@ +# MCU name +MCU = atmega32u4 + +# Processor frequency. +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to +# calculate timings. Do NOT tack on a 'UL' at the end, this will be done +# automatically to create a 32-bit value in your source code. +# +# This will be an integer division of F_USB below, as it is sourced by +# F_USB after it has run through any CPU prescalers. Note that this value +# does not *change* the processor frequency - it should merely be updated to +# reflect the processor speed set externally so that the code can use accurate +# software delays. +F_CPU = 16000000 + +# +# LUFA specific +# +# Target architecture (see library "Board Types" documentation). +ARCH = AVR8 + +# Input clock frequency. +# This will define a symbol, F_USB, in all source code files equal to the +# input clock frequency (before any prescaling is performed) in Hz. This value may +# differ from F_CPU if prescaling is used on the latter, and is required as the +# raw input clock is fed directly to the PLL sections of the AVR for high speed +# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' +# at the end, this will be done automatically to create a 32-bit value in your +# source code. +# +# If no clock division is performed on the input clock inside the AVR (via the +# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. +F_USB = $(F_CPU) + +# Bootloader +# This definition is optional, and if your keyboard supports multiple bootloaders of +# different sizes, comment this out, and the correct address will be loaded +# automatically (+60). See bootloader.mk for all options. +BOOTLOADER = atmel-dfu + + +# Interrupt driven control endpoint task(+60) +OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT + +# Build Options +# change to "no" to disable the options, or define them in the Makefile in +# the appropriate keymap folder that will get included automatically +# +BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = no # Mouse keys(+4700) +EXTRAKEY_ENABLE = yes # Audio control and System control(+450) +CONSOLE_ENABLE = yes # Console for debug(+400) +COMMAND_ENABLE = no # Commands for debug and configuration +NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality +MIDI_ENABLE = no # MIDI controls +AUDIO_ENABLE = no # Audio output on port C6 +UNICODE_ENABLE = no # Unicode +BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID +RGBLIGHT_ENABLE = yes # Enable WS2812 RGB underlight. +API_SYSEX_ENABLE = no + +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend + +DEFAULT_FOLDER = waldo/rev1 diff --git a/keyboards/waldo/waldo.c b/keyboards/waldo/waldo.c new file mode 100644 index 00000000000..33093d4bbd7 --- /dev/null +++ b/keyboards/waldo/waldo.c @@ -0,0 +1 @@ +#include "waldo.h" \ No newline at end of file diff --git a/keyboards/waldo/waldo.h b/keyboards/waldo/waldo.h new file mode 100644 index 00000000000..0e1801c9022 --- /dev/null +++ b/keyboards/waldo/waldo.h @@ -0,0 +1,51 @@ +#ifndef WALDO_H +#define WALDO_H + +#include "quantum.h" + +#define LAYOUT_60_ansi( \ + k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d, \ + k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d, \ + k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2d, \ + k30, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, \ + k40, k41, k42, k46, k49, k4a, k4c, k4d \ +) \ +{ \ + { k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d, KC_NO }, \ + { k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d, KC_NO }, \ + { k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, KC_NO, k2d, KC_NO }, \ + { k30, KC_NO, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, KC_NO, KC_NO }, \ + { k40, k41, k42, KC_NO, KC_NO, KC_NO, k46, KC_NO, KC_NO, k49, k4a, KC_NO, k4c, k4d, KC_NO } \ +} + +#define LAYOUT_60_ansi_split_bs_rshift( \ + k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d, k0e, \ + k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d, \ + k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2d, \ + k30, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d, \ + k40, k41, k42, k46, k49, k4a, k4c, k4d \ +) \ +{ \ + { k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d, k0e }, \ + { k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d, KC_NO }, \ + { k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, KC_NO, k2d, KC_NO }, \ + { k30, KC_NO, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d, KC_NO }, \ + { k40, k41, k42, KC_NO, KC_NO, KC_NO, k46, KC_NO, KC_NO, k49, k4a, KC_NO, k4c, k4d, KC_NO } \ +} + +#define LAYOUT_all( \ + k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d, k0e, \ + k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d, k1e, \ + k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2d, k2e, \ + k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d, k3e, \ + k40, k41, k42, k43, k44, k45, k46, k47, k48, k49, k4a, k4b, k4c, k4d, k4e \ +) \ +{ \ + { k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d, k0e }, \ + { k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d, k1e }, \ + { k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2d, k2e }, \ + { k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d, k3e }, \ + { k40, k41, k42, k43, k44, k45, k46, k47, k48, k49, k4a, k4b, k4c, k4d, k4e } \ +} + +#endif From 9b393700d2fdd4a1159ba265bc399726e92f4e60 Mon Sep 17 00:00:00 2001 From: MechMerlin <30334081+mechmerlin@users.noreply.github.com> Date: Sun, 7 Apr 2019 23:32:01 -0700 Subject: [PATCH 056/171] [Keyboard] Waldo 60 PCB Refactor (#5583) * use pragma once * modified readme with maintainer info * remove rev1 for the time being * QMK Configurator support for 60_ansi and 60_ansi_split_bs_rshift * add hhkb layout and QMK Configurator support * fix compile issue due to missing DEVICE_VER * use a saner and less complicated default layout * remove unused file * fix up LAYOUT_all and formatting along with QKM Configurator support * turn on bootmagic lite as the hardware reset switch isn't in a standard position * remove default folder --- keyboards/waldo/config.h | 7 +- keyboards/waldo/info.json | 24 ++++ keyboards/waldo/keymaps/default/config.h | 5 - keyboards/waldo/keymaps/default/keymap.c | 134 +++-------------------- keyboards/waldo/readme.md | 9 +- keyboards/waldo/rev1/config.h | 7 -- keyboards/waldo/rev1/info.json | 3 - keyboards/waldo/rev1/rules.mk | 1 - keyboards/waldo/rules.mk | 6 +- keyboards/waldo/waldo.h | 58 ++++++---- 10 files changed, 82 insertions(+), 172 deletions(-) create mode 100644 keyboards/waldo/info.json delete mode 100644 keyboards/waldo/keymaps/default/config.h delete mode 100644 keyboards/waldo/rev1/config.h delete mode 100644 keyboards/waldo/rev1/info.json delete mode 100644 keyboards/waldo/rev1/rules.mk diff --git a/keyboards/waldo/config.h b/keyboards/waldo/config.h index 4f7699ace4a..c460e7c2740 100644 --- a/keyboards/waldo/config.h +++ b/keyboards/waldo/config.h @@ -15,18 +15,17 @@ You should have received a copy of the GNU General Public License along with this program. If not, see . */ -#ifndef CONFIG_H -#define CONFIG_H +#pragma once #include "config_common.h" /* USB Device descriptor parameter */ #define VENDOR_ID 0xFEED #define PRODUCT_ID 0x6060 +#define DEVICE_VER 0x0001 #define MANUFACTURER Greenwald Designs #define PRODUCT Waldo #define DESCRIPTION A 60% board - /* key matrix size */ #define MATRIX_ROWS 5 #define MATRIX_COLS 15 @@ -76,5 +75,3 @@ along with this program. If not, see . // RGB LED #define RGB_DI_PIN B0 // The pin the LED strip is connected to #define RGBLED_NUM 10 // Number of LEDs in your strip - -#endif diff --git a/keyboards/waldo/info.json b/keyboards/waldo/info.json new file mode 100644 index 00000000000..5cdc12d5ef5 --- /dev/null +++ b/keyboards/waldo/info.json @@ -0,0 +1,24 @@ +{ + "keyboard_name": "", + "url": "", + "maintainer": "qmk", + "width": 15, + "height": 5, + "layouts": { + "LAYOUT_all": { + "layout": [{"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":4, "y":0}, {"x":5, "y":0}, {"x":6, "y":0}, {"x":7, "y":0}, {"x":8, "y":0}, {"x":9, "y":0}, {"x":10, "y":0}, {"x":11, "y":0}, {"x":12, "y":0}, {"x":13, "y":0}, {"x":14, "y":0}, {"x":0, "y":1, "w":1.5}, {"x":1.5, "y":1}, {"x":2.5, "y":1}, {"x":3.5, "y":1}, {"x":4.5, "y":1}, {"x":5.5, "y":1}, {"x":6.5, "y":1}, {"x":7.5, "y":1}, {"x":8.5, "y":1}, {"x":9.5, "y":1}, {"x":10.5, "y":1}, {"x":11.5, "y":1}, {"x":12.5, "y":1}, {"x":13.5, "y":1, "w":1.5}, {"x":0, "y":2, "w":1.75}, {"x":1.75, "y":2}, {"x":2.75, "y":2}, {"x":3.75, "y":2}, {"x":4.75, "y":2}, {"x":5.75, "y":2}, {"x":6.75, "y":2}, {"x":7.75, "y":2}, {"x":8.75, "y":2}, {"x":9.75, "y":2}, {"x":10.75, "y":2}, {"x":11.75, "y":2}, {"x":12.75, "y":2}, {"x":13.75, "y":2, "w":1.25}, {"x":0, "y":3, "w":1.25}, {"x":1.25, "y":3}, {"x":2.25, "y":3}, {"x":3.25, "y":3}, {"x":4.25, "y":3}, {"x":5.25, "y":3}, {"x":6.25, "y":3}, {"x":7.25, "y":3}, {"x":8.25, "y":3}, {"x":9.25, "y":3}, {"x":10.25, "y":3}, {"x":11.25, "y":3}, {"x":12.25, "y":3, "w":1.75}, {"x":14, "y":3}, {"x":0, "y":4, "w":1.25}, {"x":1.25, "y":4, "w":1.25}, {"x":2.5, "y":4, "w":1.25}, {"x":3.75, "y":4, "w":2.25}, {"x":6, "y":4, "w":1.25}, {"x":7.25, "y":4, "w":2.75}, {"x":10, "y":4, "w":1.25}, {"x":11.25, "y":4, "w":1.25}, {"x":12.5, "y":4, "w":1.25}, {"x":13.75, "y":4, "w":1.25}] + }, + + "LAYOUT_60_ansi": { + "layout": [{"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":4, "y":0}, {"x":5, "y":0}, {"x":6, "y":0}, {"x":7, "y":0}, {"x":8, "y":0}, {"x":9, "y":0}, {"x":10, "y":0}, {"x":11, "y":0}, {"x":12, "y":0}, {"x":13, "y":0, "w":2}, {"x":0, "y":1, "w":1.5}, {"x":1.5, "y":1}, {"x":2.5, "y":1}, {"x":3.5, "y":1}, {"x":4.5, "y":1}, {"x":5.5, "y":1}, {"x":6.5, "y":1}, {"x":7.5, "y":1}, {"x":8.5, "y":1}, {"x":9.5, "y":1}, {"x":10.5, "y":1}, {"x":11.5, "y":1}, {"x":12.5, "y":1}, {"x":13.5, "y":1, "w":1.5}, {"x":0, "y":2, "w":1.75}, {"x":1.75, "y":2}, {"x":2.75, "y":2}, {"x":3.75, "y":2}, {"x":4.75, "y":2}, {"x":5.75, "y":2}, {"x":6.75, "y":2}, {"x":7.75, "y":2}, {"x":8.75, "y":2}, {"x":9.75, "y":2}, {"x":10.75, "y":2}, {"x":11.75, "y":2}, {"x":12.75, "y":2, "w":2.25}, {"x":0, "y":3, "w":2.25}, {"x":2.25, "y":3}, {"x":3.25, "y":3}, {"x":4.25, "y":3}, {"x":5.25, "y":3}, {"x":6.25, "y":3}, {"x":7.25, "y":3}, {"x":8.25, "y":3}, {"x":9.25, "y":3}, {"x":10.25, "y":3}, {"x":11.25, "y":3}, {"x":12.25, "y":3, "w":2.75}, {"x":0, "y":4, "w":1.25}, {"x":1.25, "y":4, "w":1.25}, {"x":2.5, "y":4, "w":1.25}, {"x":3.75, "y":4, "w":6.25}, {"x":10, "y":4, "w":1.25}, {"x":11.25, "y":4, "w":1.25}, {"x":12.5, "y":4, "w":1.25}, {"x":13.75, "y":4, "w":1.25}] + }, + + "LAYOUT_60_hhkb": { + "layout": [{"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":4, "y":0}, {"x":5, "y":0}, {"x":6, "y":0}, {"x":7, "y":0}, {"x":8, "y":0}, {"x":9, "y":0}, {"x":10, "y":0}, {"x":11, "y":0}, {"x":12, "y":0}, {"x":13, "y":0}, {"x":14, "y":0}, {"x":0, "y":1, "w":1.5}, {"x":1.5, "y":1}, {"x":2.5, "y":1}, {"x":3.5, "y":1}, {"x":4.5, "y":1}, {"x":5.5, "y":1}, {"x":6.5, "y":1}, {"x":7.5, "y":1}, {"x":8.5, "y":1}, {"x":9.5, "y":1}, {"x":10.5, "y":1}, {"x":11.5, "y":1}, {"x":12.5, "y":1}, {"x":13.5, "y":1, "w":1.5}, {"x":0, "y":2, "w":1.75}, {"x":1.75, "y":2}, {"x":2.75, "y":2}, {"x":3.75, "y":2}, {"x":4.75, "y":2}, {"x":5.75, "y":2}, {"x":6.75, "y":2}, {"x":7.75, "y":2}, {"x":8.75, "y":2}, {"x":9.75, "y":2}, {"x":10.75, "y":2}, {"x":11.75, "y":2}, {"x":12.75, "y":2, "w":2.25}, {"x":0, "y":3, "w":2.25}, {"x":2.25, "y":3}, {"x":3.25, "y":3}, {"x":4.25, "y":3}, {"x":5.25, "y":3}, {"x":6.25, "y":3}, {"x":7.25, "y":3}, {"x":8.25, "y":3}, {"x":9.25, "y":3}, {"x":10.25, "y":3}, {"x":11.25, "y":3}, {"x":12.25, "y":3, "w":1.75}, {"x":14, "y":3}, {"x":1.5, "y":4}, {"x":2.5, "y":4, "w":1.5}, {"x":4, "y":4, "w":7}, {"x":11, "y":4, "w":1.5}, {"x":12.5, "y":4}] + }, + + "LAYOUT_60_ansi_split_bs_rshift": { + "layout": [{"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":4, "y":0}, {"x":5, "y":0}, {"x":6, "y":0}, {"x":7, "y":0}, {"x":8, "y":0}, {"x":9, "y":0}, {"x":10, "y":0}, {"x":11, "y":0}, {"x":12, "y":0}, {"x":13, "y":0}, {"x":14, "y":0}, {"x":0, "y":1, "w":1.5}, {"x":1.5, "y":1}, {"x":2.5, "y":1}, {"x":3.5, "y":1}, {"x":4.5, "y":1}, {"x":5.5, "y":1}, {"x":6.5, "y":1}, {"x":7.5, "y":1}, {"x":8.5, "y":1}, {"x":9.5, "y":1}, {"x":10.5, "y":1}, {"x":11.5, "y":1}, {"x":12.5, "y":1}, {"x":13.5, "y":1, "w":1.5}, {"x":0, "y":2, "w":1.75}, {"x":1.75, "y":2}, {"x":2.75, "y":2}, {"x":3.75, "y":2}, {"x":4.75, "y":2}, {"x":5.75, "y":2}, {"x":6.75, "y":2}, {"x":7.75, "y":2}, {"x":8.75, "y":2}, {"x":9.75, "y":2}, {"x":10.75, "y":2}, {"x":11.75, "y":2}, {"x":12.75, "y":2, "w":2.25}, {"x":0, "y":3, "w":2.25}, {"x":2.25, "y":3}, {"x":3.25, "y":3}, {"x":4.25, "y":3}, {"x":5.25, "y":3}, {"x":6.25, "y":3}, {"x":7.25, "y":3}, {"x":8.25, "y":3}, {"x":9.25, "y":3}, {"x":10.25, "y":3}, {"x":11.25, "y":3}, {"x":12.25, "y":3, "w":1.75}, {"x":14, "y":3}, {"x":0, "y":4, "w":1.25}, {"x":1.25, "y":4, "w":1.25}, {"x":2.5, "y":4, "w":1.25}, {"x":3.75, "y":4, "w":6.25}, {"x":10, "y":4, "w":1.25}, {"x":11.25, "y":4, "w":1.25}, {"x":12.5, "y":4, "w":1.25}, {"x":13.75, "y":4, "w":1.25}] + } + } +} \ No newline at end of file diff --git a/keyboards/waldo/keymaps/default/config.h b/keyboards/waldo/keymaps/default/config.h deleted file mode 100644 index 19a485296eb..00000000000 --- a/keyboards/waldo/keymaps/default/config.h +++ /dev/null @@ -1,5 +0,0 @@ -#ifndef CONFIG_USER_H -#define CONFIG_USER_H - - -#endif diff --git a/keyboards/waldo/keymaps/default/keymap.c b/keyboards/waldo/keymaps/default/keymap.c index 8a9aa15410a..2fcb3a1afbc 100644 --- a/keyboards/waldo/keymaps/default/keymap.c +++ b/keyboards/waldo/keymaps/default/keymap.c @@ -19,130 +19,26 @@ extern keymap_config_t keymap_config; enum waldo_layers { - _QWERTY, - _COLEMAK, - _DVORAK, + _BASE, _FUNCTION }; -enum waldo_keycodes { - QWERTY = SAFE_RANGE, - COLEMAK, - DVORAK, - BACKLIT -}; - const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { -/* Qwerty - * ,------------------------------------------------------------------------------------------. - * | Esc | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | - | = | Backspace | - * |------+-----+-----+-----+-----+-----+-----+-----+-----+-----+-----+-----+-----+-----+-----| - * | Tab | Q | W | E | R | T | Y | U | I | O | P | [ | ] | \ | - * |------+-----+-----+-----+-----+-----+-----+-----+-----+-----+-----+-----+-----+-----+-----| - * | Caps | A | S | D | F | G | H | J | K | L | ; | ' | Enter | - * |------+-----+-----+-----+-----+-----+-----+-----+-----+-----+-----+-----+-----+-----+-----| - * | L Shift | Z | X | C | V | B | N | M | , | . | / | R Shift | - * |------+-----+-----+-----+-----+-----+-----+-----+-----+-----+-----+-----+-----+-----+-----| - * | Ctrl | GUI | Alt | Space | Alt | GUI | Menu | Ctrl | - * `------------------------------------------------------------------------------------------' - */ + [_BASE] = LAYOUT_60_ansi( \ + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, \ + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, \ + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, \ + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, \ + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RGUI, MO(_FUNCTION), KC_RCTL \ + ), -[_QWERTY] = LAYOUT_60_ansi( \ - KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, \ - KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, \ - KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, \ - RGB_TOG, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, \ - BACKLIT, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RGUI, KC_F, KC_RCTL \ -), - -/* Colemak - * ,-----------------------------------------------------------------------------------. - * | Tab | Q | W | F | P | G | J | L | U | Y | ; | Bksp | - * |------+------+------+------+------+-------------+------+------+------+------+------| - * | Esc | A | R | S | T | D | H | N | E | I | O | " | - * |------+------+------+------+------+------|------+------+------+------+------+------| - * | Shift| Z | X | C | V | B | K | M | , | . | / |Enter | - * |------+------+------+------+------+------+------+------+------+------+------+------| - * | Brite| Ctrl | Alt | GUI |Lower | Space |Raise | Left | Down | Up |Right | - * `-----------------------------------------------------------------------------------' - */ -[_COLEMAK] = LAYOUT_60_ansi( \ - KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, \ - KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, \ - KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, \ - KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, \ - KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RGUI, KC_MENU, KC_RCTL \ -), - -/* Dvorak - * ,-----------------------------------------------------------------------------------. - * | Tab | " | , | . | P | Y | F | G | C | R | L | Bksp | - * |------+------+------+------+------+-------------+------+------+------+------+------| - * | Esc | A | O | E | U | I | D | H | T | N | S | / | - * |------+------+------+------+------+------|------+------+------+------+------+------| - * | Shift| ; | Q | J | K | X | B | M | W | V | Z |Enter | - * |------+------+------+------+------+------+------+------+------+------+------+------| - * | Brite| Ctrl | Alt | GUI |Lower | Space |Raise | Left | Down | Up |Right | - * `-----------------------------------------------------------------------------------' - */ -[_DVORAK] = LAYOUT_60_ansi( \ - KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, \ - KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, \ - KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, \ - KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, \ - KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RGUI, KC_MENU, KC_RCTL \ -), - -/* Lower - * ,-----------------------------------------------------------------------------------. - * | ~ | ! | @ | # | $ | % | ^ | & | * | ( | ) | Bksp | - * |------+------+------+------+------+-------------+------+------+------+------+------| - * | Del | F1 | F2 | F3 | F4 | F5 | F6 | _ | + | { | } | | | - * |------+------+------+------+------+------|------+------+------+------+------+------| - * | | F7 | F8 | F9 | F10 | F11 | F12 |ISO ~ |ISO | | Home | End | | - * |------+------+------+------+------+------+------+------+------+------+------+------| - * | | | | | | | | Next | Vol- | Vol+ | Play | - * `-----------------------------------------------------------------------------------' - */ -[_FUNCTION] = LAYOUT_60_ansi( \ - KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, \ - KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, \ - KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, \ - KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, \ - KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RGUI, KC_MENU, KC_RCTL \ -) + [_FUNCTION] = LAYOUT_60_ansi( \ + RESET, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, \ + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \ + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \ + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \ + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS \ + ) }; - -bool process_record_user(uint16_t keycode, keyrecord_t *record) { - switch (keycode) { - case QWERTY: - if (record->event.pressed) { - set_single_persistent_default_layer(_QWERTY); - } - return false; - break; - case COLEMAK: - if (record->event.pressed) { - set_single_persistent_default_layer(_COLEMAK); - } - return false; - break; - case DVORAK: - if (record->event.pressed) { - set_single_persistent_default_layer(_DVORAK); - } - return false; - break; - case BACKLIT: - if (record->event.pressed) { - #ifdef BACKLIGHT_ENABLE - backlight_step(); - #endif - } - return false; - break; - } - return true; -} diff --git a/keyboards/waldo/readme.md b/keyboards/waldo/readme.md index 7bc5c882564..987b1fa4973 100644 --- a/keyboards/waldo/readme.md +++ b/keyboards/waldo/readme.md @@ -1,13 +1,12 @@ -Waldo -=== +# Waldo A 60% Keyboard for use in the Holz case by Greenwald Designs -Keyboard Maintainer: TODO -Hardware Availability: TODO +Keyboard Maintainer: [That-Canadian](https://github.com/that-canadian) +Hardware Availability: https://store.projectkeyboard.com/products/waldo-pcb-60 Make example for this keyboard (after setting up your build environment): - make waldo/rev1:default + make waldo:default See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/waldo/rev1/config.h b/keyboards/waldo/rev1/config.h deleted file mode 100644 index adf65403654..00000000000 --- a/keyboards/waldo/rev1/config.h +++ /dev/null @@ -1,7 +0,0 @@ -#ifndef REV5_CONFIG_H -#define REV5_CONFIG_H - - -#define DEVICE_VER 0x0005 - -#endif diff --git a/keyboards/waldo/rev1/info.json b/keyboards/waldo/rev1/info.json deleted file mode 100644 index 3d984961ae4..00000000000 --- a/keyboards/waldo/rev1/info.json +++ /dev/null @@ -1,3 +0,0 @@ -{ - "identifier": "FEED:6060:0005" -} \ No newline at end of file diff --git a/keyboards/waldo/rev1/rules.mk b/keyboards/waldo/rev1/rules.mk deleted file mode 100644 index 7e64e7edc4f..00000000000 --- a/keyboards/waldo/rev1/rules.mk +++ /dev/null @@ -1 +0,0 @@ -AUDIO_ENABLE = yes # Audio output on port C6 diff --git a/keyboards/waldo/rules.mk b/keyboards/waldo/rules.mk index c21ed901376..40ac48474ed 100644 --- a/keyboards/waldo/rules.mk +++ b/keyboards/waldo/rules.mk @@ -47,14 +47,14 @@ OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT # change to "no" to disable the options, or define them in the Makefile in # the appropriate keymap folder that will get included automatically # -BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) +BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration(+1000) MOUSEKEY_ENABLE = no # Mouse keys(+4700) EXTRAKEY_ENABLE = yes # Audio control and System control(+450) CONSOLE_ENABLE = yes # Console for debug(+400) COMMAND_ENABLE = no # Commands for debug and configuration NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality -MIDI_ENABLE = no # MIDI controls +MIDI_ENABLE = no # MIDI controls AUDIO_ENABLE = no # Audio output on port C6 UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID @@ -63,5 +63,3 @@ API_SYSEX_ENABLE = no # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend - -DEFAULT_FOLDER = waldo/rev1 diff --git a/keyboards/waldo/waldo.h b/keyboards/waldo/waldo.h index 0e1801c9022..f683ca82ff0 100644 --- a/keyboards/waldo/waldo.h +++ b/keyboards/waldo/waldo.h @@ -1,51 +1,63 @@ -#ifndef WALDO_H -#define WALDO_H +#pragma once #include "quantum.h" #define LAYOUT_60_ansi( \ k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d, \ k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d, \ - k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2d, \ - k30, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, \ - k40, k41, k42, k46, k49, k4a, k4c, k4d \ + k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2d, \ + k30, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, \ + k40, k41, k42, k46, k49, k4a, k4c, k4d \ ) \ { \ { k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d, KC_NO }, \ { k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d, KC_NO }, \ { k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, KC_NO, k2d, KC_NO }, \ { k30, KC_NO, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, KC_NO, KC_NO }, \ - { k40, k41, k42, KC_NO, KC_NO, KC_NO, k46, KC_NO, KC_NO, k49, k4a, KC_NO, k4c, k4d, KC_NO } \ + { k40, k41, k42, KC_NO, KC_NO, KC_NO, k46, KC_NO, KC_NO, k49, k4a, KC_NO, k4c, k4d, KC_NO } \ +} + +#define LAYOUT_60_hhkb( \ + k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d, k0e, \ + k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d, \ + k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2d, \ + k30, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d, \ + k41, k42, k46, k49, k4a \ +) \ +{ \ + { k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d, k0e }, \ + { k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d, KC_NO }, \ + { k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, KC_NO, k2d, KC_NO }, \ + { k30, KC_NO, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d, KC_NO }, \ + { KC_NO, k41, k42, KC_NO, KC_NO, KC_NO, k46, KC_NO, KC_NO, k49, k4a, KC_NO, KC_NO, KC_NO, C_NO } \ } #define LAYOUT_60_ansi_split_bs_rshift( \ k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d, k0e, \ - k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d, \ - k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2d, \ - k30, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d, \ - k40, k41, k42, k46, k49, k4a, k4c, k4d \ + k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d, \ + k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2d, \ + k30, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d, \ + k40, k41, k42, k46, k49, k4a, k4c, k4d \ ) \ { \ - { k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d, k0e }, \ + { k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d, k0e }, \ { k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d, KC_NO }, \ { k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, KC_NO, k2d, KC_NO }, \ { k30, KC_NO, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d, KC_NO }, \ - { k40, k41, k42, KC_NO, KC_NO, KC_NO, k46, KC_NO, KC_NO, k49, k4a, KC_NO, k4c, k4d, KC_NO } \ + { k40, k41, k42, KC_NO, KC_NO, KC_NO, k46, KC_NO, KC_NO, k49, k4a, KC_NO, k4c, k4d, KC_NO } \ } #define LAYOUT_all( \ k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d, k0e, \ - k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d, k1e, \ - k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2d, k2e, \ - k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d, k3e, \ - k40, k41, k42, k43, k44, k45, k46, k47, k48, k49, k4a, k4b, k4c, k4d, k4e \ + k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d, \ + k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2d, \ + k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d, \ + k40, k41, k42, k44, k46, k48, k49, k4a, k4c, k4d \ ) \ { \ - { k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d, k0e }, \ - { k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d, k1e }, \ - { k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2d, k2e }, \ - { k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d, k3e }, \ - { k40, k41, k42, k43, k44, k45, k46, k47, k48, k49, k4a, k4b, k4c, k4d, k4e } \ + { k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d, k0e }, \ + { k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d, KC_NO }, \ + { k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2d, KC_NO }, \ + { k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d, KC_NO }, \ + { k40, k41, k42, KC_NO, k44, KC_NO, k46, KC_NO, k48, k49, k4a, KC_NO, k4c, k4d } \ } - -#endif From 91b18e263f6373994613c290129e49f18e17cef1 Mon Sep 17 00:00:00 2001 From: zvecr Date: Mon, 8 Apr 2019 18:53:15 +0100 Subject: [PATCH 057/171] [Keyboard] Refactor jj40 to current standards (#5574) * Refactor jj40 in line with current ps2avrgb template * Disable bootmagic lite as it seems to not work on atmega32a/bootloadHID * Add backlight pwm bodge till #4324 lands * Increase planck keymap compatibility --- keyboards/jj40/backlight.c | 213 ------------------------ keyboards/jj40/backlight_custom.h | 15 -- keyboards/jj40/breathing_custom.h | 140 ---------------- keyboards/jj40/config.h | 40 +++-- keyboards/jj40/i2c.c | 104 ------------ keyboards/jj40/i2c.h | 25 --- keyboards/jj40/jj40.c | 61 ++----- keyboards/jj40/jj40.h | 86 ++++------ keyboards/jj40/keymaps/default/keymap.c | 59 +++++-- keyboards/jj40/matrix.c | 112 ------------- keyboards/jj40/rules.mk | 42 ++--- quantum/quantum.c | 7 + 12 files changed, 142 insertions(+), 762 deletions(-) delete mode 100644 keyboards/jj40/backlight.c delete mode 100644 keyboards/jj40/backlight_custom.h delete mode 100644 keyboards/jj40/breathing_custom.h delete mode 100644 keyboards/jj40/i2c.c delete mode 100644 keyboards/jj40/i2c.h delete mode 100644 keyboards/jj40/matrix.c diff --git a/keyboards/jj40/backlight.c b/keyboards/jj40/backlight.c deleted file mode 100644 index fbd241fa9de..00000000000 --- a/keyboards/jj40/backlight.c +++ /dev/null @@ -1,213 +0,0 @@ -/** - * Backlighting code for PS2AVRGB boards (ATMEGA32A) - * Kenneth A. (github.com/krusli | krusli.me) - */ - -#include "backlight.h" -#include "quantum.h" - -#include -#include - -#include "backlight_custom.h" -#include "breathing_custom.h" - -// DEBUG -#include -#include - -// Port D: digital pins of the AVR chipset -#define NUMLOCK_PORT (1 << 0) // D0 -#define CAPSLOCK_PORT (1 << 1) // D1 -#define BACKLIGHT_PORT (1 << 4) // D4 -#define SCROLLLOCK_PORT (1 << 6) // D6 - -#define TIMER_CLK_DIV64 0x03 ///< Timer clocked at F_CPU/64 -#define TIMER1PRESCALE TIMER_CLK_DIV64 ///< timer 1 prescaler default - -#define TIMER_PRESCALE_MASK 0x07 ///< Timer Prescaler Bit-Mask - -#define PWM_MAX 0xFF -#define TIMER_TOP 255 // 8 bit PWM - -extern backlight_config_t backlight_config; - -/** - * References - * Port Registers: https://www.arduino.cc/en/Reference/PortManipulation - * TCCR1A: https://electronics.stackexchange.com/questions/92350/what-is-the-difference-between-tccr1a-and-tccr1b - * Timers: http://www.avrbeginners.net/architecture/timers/timers.html - * 16-bit timer setup: http://sculland.com/ATmega168/Interrupts-And-Timers/16-Bit-Timer-Setup/ - * PS2AVRGB firmware: https://github.com/showjean/ps2avrU/tree/master/firmware - */ - -// @Override -// turn LEDs on and off depending on USB caps/num/scroll lock states. -__attribute__ ((weak)) -void led_set_user(uint8_t usb_led) { - if (usb_led & (1 << USB_LED_NUM_LOCK)) { - // turn on - DDRD |= NUMLOCK_PORT; - PORTD |= NUMLOCK_PORT; - } else { - // turn off - DDRD &= ~NUMLOCK_PORT; - PORTD &= ~NUMLOCK_PORT; - } - - if (usb_led & (1 << USB_LED_CAPS_LOCK)) { - DDRD |= CAPSLOCK_PORT; - PORTD |= CAPSLOCK_PORT; - } else { - DDRD &= ~CAPSLOCK_PORT; - PORTD &= ~CAPSLOCK_PORT; - } - - if (usb_led & (1 << USB_LED_SCROLL_LOCK)) { - DDRD |= SCROLLLOCK_PORT; - PORTD |= SCROLLLOCK_PORT; - } else { - DDRD &= ~SCROLLLOCK_PORT; - PORTD &= ~SCROLLLOCK_PORT; - } -} - -#ifdef BACKLIGHT_ENABLE - -// sets up Timer 1 for 8-bit PWM -void timer1PWMSetup(void) { // NOTE ONLY CALL THIS ONCE - // default 8 bit mode - TCCR1A &= ~(1 << 1); // cbi(TCCR1A,PWM11); <- set PWM11 bit to HIGH - TCCR1A |= (1 << 0); // sbi(TCCR1A,PWM10); <- set PWM10 bit to LOW - - // clear output compare value A - // outb(OCR1AH, 0); - // outb(OCR1AL, 0); - - // clear output comparator registers for B - OCR1BH = 0; // outb(OCR1BH, 0); - OCR1BL = 0; // outb(OCR1BL, 0); -} - -bool is_init = false; -void timer1Init(void) { - // timer1SetPrescaler(TIMER1PRESCALE) - // set to DIV/64 - (TCCR1B) = ((TCCR1B) & ~TIMER_PRESCALE_MASK) | TIMER1PRESCALE; - - // reset TCNT1 - TCNT1H = 0; // outb(TCNT1H, 0); - TCNT1L = 0; // outb(TCNT1L, 0); - - // TOIE1: Timer Overflow Interrupt Enable (Timer 1); - TIMSK |= _BV(TOIE1); // sbi(TIMSK, TOIE1); - - is_init = true; -} - -void timer1UnInit(void) { - // set prescaler back to NONE - (TCCR1B) = ((TCCR1B) & ~TIMER_PRESCALE_MASK) | 0x00; // TIMERRTC_CLK_STOP - - // disable timer overflow interrupt - TIMSK &= ~_BV(TOIE1); // overflow bit? - - setPWM(0); - - is_init = false; -} - - -// handle TCNT1 overflow -//! Interrupt handler for tcnt1 overflow interrupt -ISR(TIMER1_OVF_vect, ISR_NOBLOCK) -{ - // sei(); - // handle breathing here - #ifdef BACKLIGHT_BREATHING - if (is_breathing()) { - custom_breathing_handler(); - } - #endif - - // TODO call user defined function -} - -// enable timer 1 PWM -// timer1PWMBOn() -void timer1PWMBEnable(void) { - // turn on channel B (OC1B) PWM output - // set OC1B as non-inverted PWM - TCCR1A |= _BV(COM1B1); - TCCR1A &= ~_BV(COM1B0); -} - -// disable timer 1 PWM -// timer1PWMBOff() -void timer1PWMBDisable(void) { - TCCR1A &= ~_BV(COM1B1); - TCCR1A &= ~_BV(COM1B0); -} - -void enableBacklight(void) { - DDRD |= BACKLIGHT_PORT; // set digital pin 4 as output - PORTD |= BACKLIGHT_PORT; // set digital pin 4 to high -} - -void disableBacklight(void) { - // DDRD &= ~BACKLIGHT_PORT; // set digital pin 4 as input - PORTD &= ~BACKLIGHT_PORT; // set digital pin 4 to low -} - -void startPWM(void) { - timer1Init(); - timer1PWMBEnable(); - enableBacklight(); -} - -void stopPWM(void) { - timer1UnInit(); - disableBacklight(); - timer1PWMBDisable(); -} - -void b_led_init_ports(void) { - /* turn backlight on/off depending on user preference */ - #if BACKLIGHT_ON_STATE == 0 - // DDRx register: sets the direction of Port D - // DDRD &= ~BACKLIGHT_PORT; // set digital pin 4 as input - PORTD &= ~BACKLIGHT_PORT; // set digital pin 4 to low - #else - DDRD |= BACKLIGHT_PORT; // set digital pin 4 as output - PORTD |= BACKLIGHT_PORT; // set digital pin 4 to high - #endif - - timer1PWMSetup(); - startPWM(); - - #ifdef BACKLIGHT_BREATHING - breathing_enable(); - #endif -} - -void b_led_set(uint8_t level) { - if (level > BACKLIGHT_LEVELS) { - level = BACKLIGHT_LEVELS; - } - - setPWM((int)(TIMER_TOP * (float) level / BACKLIGHT_LEVELS)); -} - -// called every matrix scan -void b_led_task(void) { - // do nothing for now -} - -void setPWM(uint16_t xValue) { - if (xValue > TIMER_TOP) { - xValue = TIMER_TOP; - } - OCR1B = xValue; // timer1PWMBSet(xValue); -} - -#endif // BACKLIGHT_ENABLE diff --git a/keyboards/jj40/backlight_custom.h b/keyboards/jj40/backlight_custom.h deleted file mode 100644 index 7210be840e0..00000000000 --- a/keyboards/jj40/backlight_custom.h +++ /dev/null @@ -1,15 +0,0 @@ -/** - * Backlighting code for PS2AVRGB boards (ATMEGA32A) - * Kenneth A. (github.com/krusli | krusli.me) - */ - -#ifndef BACKLIGHT_CUSTOM_H -#define BACKLIGHT_CUSTOM_H - -#include -void b_led_init_ports(void); -void b_led_set(uint8_t level); -void b_led_task(void); -void setPWM(uint16_t xValue); - -#endif // BACKLIGHT_CUSTOM_H diff --git a/keyboards/jj40/breathing_custom.h b/keyboards/jj40/breathing_custom.h deleted file mode 100644 index 71416b1b45d..00000000000 --- a/keyboards/jj40/breathing_custom.h +++ /dev/null @@ -1,140 +0,0 @@ -/** - * Breathing effect code for PS2AVRGB boards (ATMEGA32A) - * Works in conjunction with `backlight.c`. - * - * Code adapted from `quantum.c` to register with the existing TIMER1 overflow - * handler in `backlight.c` instead of setting up its own timer. - * Kenneth A. (github.com/krusli | krusli.me) - */ - -#ifdef BACKLIGHT_ENABLE -#ifdef BACKLIGHT_BREATHING - -#include "backlight_custom.h" - -#ifndef BREATHING_PERIOD -#define BREATHING_PERIOD 6 -#endif - -#define breathing_min() do {breathing_counter = 0;} while (0) -#define breathing_max() do {breathing_counter = breathing_period * 244 / 2;} while (0) - -// TODO make this share code with quantum.c - -#define BREATHING_NO_HALT 0 -#define BREATHING_HALT_OFF 1 -#define BREATHING_HALT_ON 2 -#define BREATHING_STEPS 128 - -static uint8_t breathing_period = BREATHING_PERIOD; -static uint8_t breathing_halt = BREATHING_NO_HALT; -static uint16_t breathing_counter = 0; - -static bool breathing = false; - -bool is_breathing(void) { - return breathing; -} - -// See http://jared.geek.nz/2013/feb/linear-led-pwm -static uint16_t cie_lightness(uint16_t v) { - if (v <= 5243) // if below 8% of max - return v / 9; // same as dividing by 900% - else { - uint32_t y = (((uint32_t) v + 10486) << 8) / (10486 + 0xFFFFUL); // add 16% of max and compare - // to get a useful result with integer division, we shift left in the expression above - // and revert what we've done again after squaring. - y = y * y * y >> 8; - if (y > 0xFFFFUL) // prevent overflow - return 0xFFFFU; - else - return (uint16_t) y; - } -} - -void breathing_enable(void) { - breathing = true; - breathing_counter = 0; - breathing_halt = BREATHING_NO_HALT; - // interrupt already registered -} - -void breathing_pulse(void) { - if (get_backlight_level() == 0) - breathing_min(); - else - breathing_max(); - breathing_halt = BREATHING_HALT_ON; - // breathing_interrupt_enable(); - breathing = true; -} - -void breathing_disable(void) { - breathing = false; - // backlight_set(get_backlight_level()); - b_led_set(get_backlight_level()); // custom implementation of backlight_set() -} - -void breathing_self_disable(void) -{ - if (get_backlight_level() == 0) - breathing_halt = BREATHING_HALT_OFF; - else - breathing_halt = BREATHING_HALT_ON; -} - -void breathing_toggle(void) { - if (is_breathing()) - breathing_disable(); - else - breathing_enable(); -} - -void breathing_period_set(uint8_t value) -{ - if (!value) - value = 1; - breathing_period = value; -} - -void breathing_period_default(void) { - breathing_period_set(BREATHING_PERIOD); -} - -void breathing_period_inc(void) -{ - breathing_period_set(breathing_period+1); -} - -void breathing_period_dec(void) -{ - breathing_period_set(breathing_period-1); -} - -/* To generate breathing curve in python: - * from math import sin, pi; [int(sin(x/128.0*pi)**4*255) for x in range(128)] - */ -static const uint8_t breathing_table[BREATHING_STEPS] PROGMEM = {0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 2, 3, 4, 5, 6, 8, 10, 12, 15, 17, 20, 24, 28, 32, 36, 41, 46, 51, 57, 63, 70, 76, 83, 91, 98, 106, 113, 121, 129, 138, 146, 154, 162, 170, 178, 185, 193, 200, 207, 213, 220, 225, 231, 235, 240, 244, 247, 250, 252, 253, 254, 255, 254, 253, 252, 250, 247, 244, 240, 235, 231, 225, 220, 213, 207, 200, 193, 185, 178, 170, 162, 154, 146, 138, 129, 121, 113, 106, 98, 91, 83, 76, 70, 63, 57, 51, 46, 41, 36, 32, 28, 24, 20, 17, 15, 12, 10, 8, 6, 5, 4, 3, 2, 1, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0}; - -// Use this before the cie_lightness function. -static inline uint16_t scale_backlight(uint16_t v) { - return v / BACKLIGHT_LEVELS * get_backlight_level(); -} - -void custom_breathing_handler(void) { - uint16_t interval = (uint16_t) breathing_period * 244 / BREATHING_STEPS; - // resetting after one period to prevent ugly reset at overflow. - breathing_counter = (breathing_counter + 1) % (breathing_period * 244); - uint8_t index = breathing_counter / interval % BREATHING_STEPS; - - if (((breathing_halt == BREATHING_HALT_ON) && (index == BREATHING_STEPS / 2)) || - ((breathing_halt == BREATHING_HALT_OFF) && (index == BREATHING_STEPS - 1))) - { - // breathing_interrupt_disable(); - } - - setPWM(cie_lightness(scale_backlight((uint16_t) pgm_read_byte(&breathing_table[index]) * 0x0101U))); -} - -#endif // BACKLIGHT_BREATHING -#endif // BACKLIGHT_ENABLE diff --git a/keyboards/jj40/config.h b/keyboards/jj40/config.h index 67561b0b28b..e88147ac85c 100644 --- a/keyboards/jj40/config.h +++ b/keyboards/jj40/config.h @@ -1,51 +1,55 @@ /* Copyright 2017 Luiz Ribeiro - This program is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, either version 2 of the License, or (at your option) any later version. - This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. - You should have received a copy of the GNU General Public License along with this program. If not, see . */ -#include "config_common.h" +#pragma once -#ifndef CONFIG_H -#define CONFIG_H +#include "config_common.h" #define VENDOR_ID 0x20A0 #define PRODUCT_ID 0x422D // TODO: share these strings with usbconfig.h // Edit usbconfig.h to change these. -#define MANUFACTURER winkeyless.kr +#define MANUFACTURER Kprepublic #define PRODUCT jj40 /* matrix size */ -#define MATRIX_ROWS 8 -#define MATRIX_COLS 15 +#define MATRIX_ROWS 4 +#define MATRIX_COLS 12 +#define MATRIX_ROW_PINS { B0, B1, B3, B4 } +#define MATRIX_COL_PINS { C4, C5, C6, C7, A4, A5, A6, A7, A3, A2, A1, A0 } /* COL2ROW or ROW2COL */ #define DIODE_DIRECTION COL2ROW +#define BACKLIGHT_PIN D4 #define BACKLIGHT_LEVELS 12 -// #define BACKLIGHT_BREATHING // works, but BL_TOGG might not work +// #define BACKLIGHT_BREATHING // Requires #4324 to enable hardware pwm for atmega32a -#define TAPPING_TOGGLE 3 +/* RGB underglow */ +// NOTE: for PS2AVRGB boards, underglow commands are sent via I2C to 0xB0. +#define RGBLED_NUM 5 +#define RGBLIGHT_ANIMATIONS + +/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ +#define DEBOUNCING_DELAY 5 #define NO_UART 1 -/* RGB underglow */ -// The RGB_DI_PIN value seems to be shared between all PS2AVRGB boards. -// The same pin is used on the JJ40, at least. -#define RGBLED_NUM 5 -#define RGB_DI_PIN E2 // NOTE: for PS2AVRGB boards, underglow commands are sent via I2C to 0xB0. -#define RGBLIGHT_ANIMATIONS +/* key combination for magic key command */ +/* defined by default; to change, uncomment and set to the combination you want */ +// #define IS_COMMAND() (get_mods() == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT))) -#endif +/* Bootmagic Lite key configuration */ +// #define BOOTMAGIC_LITE_ROW 0 +// #define BOOTMAGIC_LITE_COLUMN 0 diff --git a/keyboards/jj40/i2c.c b/keyboards/jj40/i2c.c deleted file mode 100644 index c27f3e3d17e..00000000000 --- a/keyboards/jj40/i2c.c +++ /dev/null @@ -1,104 +0,0 @@ -/* -Copyright 2016 Luiz Ribeiro - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see . -*/ - -#include -#include - -#include "i2c.h" - -void i2c_set_bitrate(uint16_t bitrate_khz) { - uint8_t bitrate_div = ((F_CPU / 1000l) / bitrate_khz); - if (bitrate_div >= 16) { - bitrate_div = (bitrate_div - 16) / 2; - } - TWBR = bitrate_div; -} - -void i2c_init(void) { - // set pull-up resistors on I2C bus pins - PORTC |= 0b11; - - i2c_set_bitrate(400); - - // enable TWI (two-wire interface) - TWCR |= (1 << TWEN); - - // enable TWI interrupt and slave address ACK - TWCR |= (1 << TWIE); - TWCR |= (1 << TWEA); -} - -uint8_t i2c_start(uint8_t address) { - // reset TWI control register - TWCR = 0; - - // begin transmission and wait for it to end - TWCR = (1< - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see . -*/ - -#ifndef __I2C_H__ -#define __I2C_H__ - -void i2c_init(void); -void i2c_set_bitrate(uint16_t bitrate_khz); -uint8_t i2c_send(uint8_t address, uint8_t *data, uint16_t length); - -#endif diff --git a/keyboards/jj40/jj40.c b/keyboards/jj40/jj40.c index 51f5295f465..26cfa6c067e 100644 --- a/keyboards/jj40/jj40.c +++ b/keyboards/jj40/jj40.c @@ -18,53 +18,26 @@ along with this program. If not, see . #include "jj40.h" -#include +#ifdef RGBLIGHT_ENABLE -#include "action_layer.h" -#include "quantum.h" +#include +#include "i2c_master.h" +#include "rgblight.h" -#include "i2c.h" +extern rgblight_config_t rgblight_config; -#include "backlight.h" -#include "backlight_custom.h" - -// for keyboard subdirectory level init functions -// @Override void matrix_init_kb(void) { + i2c_init(); // call user level keymaps, if any matrix_init_user(); } - -#ifdef BACKLIGHT_ENABLE -/// Overrides functions in `quantum.c` -void backlight_init_ports(void) { - b_led_init_ports(); -} - -void backlight_task(void) { - b_led_task(); -} - -void backlight_set(uint8_t level) { - b_led_set(level); -} -#endif - -#ifdef RGBLIGHT_ENABLE -extern rgblight_config_t rgblight_config; - // custom RGB driver void rgblight_set(void) { if (!rgblight_config.enable) { - for (uint8_t i=0; i. */ -#ifndef KEYMAP_COMMON_H -#define KEYMAP_COMMON_H +#pragma once #include "quantum.h" -#include "quantum_keycodes.h" -#include "keycode.h" -#include "action.h" - -void matrix_init_user(void); // TODO port this to other PS2AVRGB boards - -#define XXX KC_NO +#define ___ KC_NO #define LAYOUT_ortho_4x12( \ - K01, K02, K03, K04, K05, K06, K07, K08, K09, K010, K011, K012, \ - K11, K12, K13, K14, K15, K16, K17, K18, K19, K110, K111, K112, \ - K21, K22, K23, K24, K25, K26, K27, K28, K29, K210, K211, K212, \ - K31, K32, K33, K34, K35, K36, K37, K38, K39, K310, K311, K312 \ + K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, \ + K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, \ + K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, \ + K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B \ ) \ { \ - { K012, K011, K010, K09, K05, K06, K07, K08, K04, K03, K02, K01 }, \ - { K112, K111, K110, K19, K15, K16, K17, K18, K14, K13, K12, K11 }, \ - { XXX, XXX, XXX, XXX, XXX, XXX, XXX, XXX, XXX, XXX, XXX, XXX }, \ - { K212, K211, K210, K29, K25, K26, K27, K28, K24, K23, K22, K21 }, \ - { K312, K311, K310, K39, K35, K36, K37, K38, K34, K33, K32, K31 } \ + { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B }, \ + { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B }, \ + { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B }, \ + { K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B } \ } #define LAYOUT_planck_mit( \ - K01, K02, K03, K04, K05, K06, K07, K08, K09, K010, K011, K012, \ - K11, K12, K13, K14, K15, K16, K17, K18, K19, K110, K111, K112, \ - K21, K22, K23, K24, K25, K26, K27, K28, K29, K210, K211, K212, \ - K31, K32, K33, K34, K35, K3X, K38, K39, K310, K311, K312 \ + K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, \ + K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, \ + K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, \ + K30, K31, K32, K33, K34, K3X, K37, K38, K39, K3A, K3B \ ) \ { \ - { K012, K011, K010, K09, K05, K06, K07, K08, K04, K03, K02, K01 }, \ - { K112, K111, K110, K19, K15, K16, K17, K18, K14, K13, K12, K11 }, \ - { XXX, XXX, XXX, XXX, XXX, XXX, XXX, XXX, XXX, XXX, XXX, XXX }, \ - { K212, K211, K210, K29, K25, K26, K27, K28, K24, K23, K22, K21 }, \ - { K312, K311, K310, K39, K35, K3X, XXX, K38, K34, K33, K32, K31 } \ + { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B }, \ + { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B }, \ + { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B }, \ + { K30, K31, K32, K33, K34, K3X, ___, K37, K38, K39, K3A, K3B } \ } #define LAYOUT_planck_1x2uR( \ - K01, K02, K03, K04, K05, K06, K07, K08, K09, K010, K011, K012, \ - K11, K12, K13, K14, K15, K16, K17, K18, K19, K110, K111, K112, \ - K21, K22, K23, K24, K25, K26, K27, K28, K29, K210, K211, K212, \ - K31, K32, K33, K34, K35, K36, K3X, K39, K310, K311, K312 \ + K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, \ + K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, \ + K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, \ + K30, K31, K32, K33, K34, K35, K3X, K38, K39, K3A, K3B \ ) \ { \ - { K012, K011, K010, K09, K05, K06, K07, K08, K04, K03, K02, K01 }, \ - { K112, K111, K110, K19, K15, K16, K17, K18, K14, K13, K12, K11 }, \ - { XXX, XXX, XXX, XXX, XXX, XXX, XXX, XXX, XXX, XXX, XXX, XXX }, \ - { K212, K211, K210, K29, K25, K26, K27, K28, K24, K23, K22, K21 }, \ - { K312, K311, K310, K39, K35, K36, K3X, XXX, K34, K33, K32, K31 } \ + { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B }, \ + { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B }, \ + { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B }, \ + { K30, K31, K32, K33, K34, K35, K3X, ___, K38, K39, K3A, K3B } \ } #define LAYOUT_kc( \ - k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, \ - k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, \ - k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, \ - k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b \ - ) \ - LAYOUT_ortho_4x12( \ - KC_##k00, KC_##k01, KC_##k02, KC_##k03, KC_##k04, KC_##k05, KC_##k06, KC_##k07, KC_##k08, KC_##k09, KC_##k0a, KC_##k0b, \ - KC_##k10, KC_##k11, KC_##k12, KC_##k13, KC_##k14, KC_##k15, KC_##k16, KC_##k17, KC_##k18, KC_##k19, KC_##k1a, KC_##k1b, \ - KC_##k20, KC_##k21, KC_##k22, KC_##k23, KC_##k24, KC_##k25, KC_##k26, KC_##k27, KC_##k28, KC_##k29, KC_##k2a, KC_##k2b, \ - KC_##k30, KC_##k31, KC_##k32, KC_##k33, KC_##k34, KC_##k35, KC_##k36, KC_##k37, KC_##k38, KC_##k39, KC_##k3a, KC_##k3b \ + k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, \ + k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, \ + k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, \ + k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b \ +) \ +LAYOUT_ortho_4x12( \ + KC_##k00, KC_##k01, KC_##k02, KC_##k03, KC_##k04, KC_##k05, KC_##k06, KC_##k07, KC_##k08, KC_##k09, KC_##k0a, KC_##k0b, \ + KC_##k10, KC_##k11, KC_##k12, KC_##k13, KC_##k14, KC_##k15, KC_##k16, KC_##k17, KC_##k18, KC_##k19, KC_##k1a, KC_##k1b, \ + KC_##k20, KC_##k21, KC_##k22, KC_##k23, KC_##k24, KC_##k25, KC_##k26, KC_##k27, KC_##k28, KC_##k29, KC_##k2a, KC_##k2b, \ + KC_##k30, KC_##k31, KC_##k32, KC_##k33, KC_##k34, KC_##k35, KC_##k36, KC_##k37, KC_##k38, KC_##k39, KC_##k3a, KC_##k3b \ ) #define LAYOUT LAYOUT_planck_mit - #define LAYOUT_kc_ortho_4x12 LAYOUT_kc - -#endif +#define KC_LAYOUT_ortho_4x12 LAYOUT_kc diff --git a/keyboards/jj40/keymaps/default/keymap.c b/keyboards/jj40/keymaps/default/keymap.c index d84b01b15a4..47c6bada689 100644 --- a/keyboards/jj40/keymaps/default/keymap.c +++ b/keyboards/jj40/keymaps/default/keymap.c @@ -1,16 +1,30 @@ +/* Copyright 2019 + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ #include QMK_KEYBOARD_H - -#define _QWERTY 0 -#define _LOWER 1 -#define _RAISE 2 - -enum custom_keycodes { - QWERTY = SAFE_RANGE, - LOWER, - RAISE, +enum layers { + _QWERTY = 0, + _LOWER, + _RAISE, + _ADJUST, }; +#define LOWER MO(_LOWER) +#define RAISE MO(_RAISE) + const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { /* Qwerty * ,-----------------------------------------------------------------------------------. @@ -27,7 +41,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC, \ KC_ESC, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, \ KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_ENT , \ - _______, KC_LCTL, KC_LALT, KC_LGUI, MO(_LOWER), KC_SPC, MO(_RAISE), KC_LEFT, KC_DOWN, KC_UP, KC_RGHT \ + _______, KC_LCTL, KC_LALT, KC_LGUI, LOWER, KC_SPC, RAISE, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT \ ), /* Lower @@ -64,10 +78,27 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { KC_DEL, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_MINS, KC_EQL, KC_LBRC, KC_RBRC, KC_BSLS, \ _______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_NUHS, KC_NUBS, _______, _______, _______, \ _______, _______, _______, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY \ +), + +/* Adjust (Lower + Raise) + * ,-----------------------------------------------------------------------------------. + * | | Reset| | | | | | | | | | Del | + * |------+------+------+------+------+-------------+------+------+------+------+------| + * | | | | | | | | | | | | | + * |------+------+------+------+------+------|------+------+------+------+------+------| + * | | | | | | | | | | | | | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | | | | | | | | | | | | + * `-----------------------------------------------------------------------------------' + */ +[_ADJUST] = LAYOUT_ortho_4x12( \ + _______, RESET, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_DEL, \ + _______, _______, BL_TOGG, BL_STEP, _______, _______, _______, _______, _______, _______, _______, _______, \ + _______, _______, RGB_TOG, RGB_MOD, _______, _______, _______, _______, _______, _______, _______, _______, \ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ \ ) }; -// Loop -void matrix_scan_user(void) { - // Empty -}; +uint32_t layer_state_set_user(uint32_t state) { + return update_tri_layer_state(state, _LOWER, _RAISE, _ADJUST); +} diff --git a/keyboards/jj40/matrix.c b/keyboards/jj40/matrix.c deleted file mode 100644 index 245813dfd2d..00000000000 --- a/keyboards/jj40/matrix.c +++ /dev/null @@ -1,112 +0,0 @@ -/* -Copyright 2017 Luiz Ribeiro - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see . -*/ - -#include -#include - -#include "matrix.h" - -#ifndef DEBOUNCE -# define DEBOUNCE 5 -#endif - -static uint8_t debouncing = DEBOUNCE; - -static matrix_row_t matrix[MATRIX_ROWS]; -static matrix_row_t matrix_debouncing[MATRIX_ROWS]; - -void matrix_set_row_status(uint8_t row); -uint8_t bit_reverse(uint8_t x); - -void matrix_init(void) { - // all outputs for rows high - DDRB = 0xFF; - PORTB = 0xFF; - // all inputs for columns - DDRA = 0x00; - DDRC &= ~(0x111111<<2); - DDRD &= ~(1< 7 - (~PINA) & 0xFF - ) | ( - // cols 8..13, PORTC 7 -> 0 - bit_reverse((~PINC) & 0xFF) << 8 - ) | ( - // col 14, PORTD 7 - ((~PIND) & (1 << PIND7)) << 7 - ); - - if (matrix_debouncing[row] != cols) { - matrix_debouncing[row] = cols; - debouncing = DEBOUNCE; - } - } - - if (debouncing) { - if (--debouncing) { - _delay_ms(1); - } else { - for (uint8_t i = 0; i < MATRIX_ROWS; i++) { - matrix[i] = matrix_debouncing[i]; - } - } - } - - matrix_scan_quantum(); - - return 1; -} - -// declarations -void matrix_set_row_status(uint8_t row) { - DDRB = (1 << row); - PORTB = ~(1 << row); -} - -uint8_t bit_reverse(uint8_t x) { - x = ((x >> 1) & 0x55) | ((x << 1) & 0xaa); - x = ((x >> 2) & 0x33) | ((x << 2) & 0xcc); - x = ((x >> 4) & 0x0f) | ((x << 4) & 0xf0); - return x; -} - -inline matrix_row_t matrix_get_row(uint8_t row) { - return matrix[row]; -} - -void matrix_print(void) { -} diff --git a/keyboards/jj40/rules.mk b/keyboards/jj40/rules.mk index 697e17a0141..3e496f97e95 100644 --- a/keyboards/jj40/rules.mk +++ b/keyboards/jj40/rules.mk @@ -30,29 +30,29 @@ F_CPU = 12000000 # automatically (+60). See bootloader.mk for all options. BOOTLOADER = bootloadHID -# build options -BOOTMAGIC_ENABLE = no -MOUSEKEY_ENABLE = no -EXTRAKEY_ENABLE = yes -CONSOLE_ENABLE = no -COMMAND_ENABLE = yes - -BACKLIGHT_ENABLE = yes -BACKLIGHT_CUSTOM_DRIVER = yes - -RGBLIGHT_ENABLE = yes -RGBLIGHT_CUSTOM_DRIVER = yes - -KEY_LOCK_ENABLE = yes - +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = no # Mouse keys(+4700) +EXTRAKEY_ENABLE = yes # Audio control and System control(+450) +CONSOLE_ENABLE = no # Console for debug(+400) +COMMAND_ENABLE = no # Commands for debug and configuration # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE -SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend +# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +NKRO_ENABLE = no # USB Nkey Rollover +BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality on B7 by default +RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow +RGBLIGHT_CUSTOM_DRIVER = yes +MIDI_ENABLE = no # MIDI support (+2400 to 4200, depending on config) +UNICODE_ENABLE = no # Unicode +BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID +AUDIO_ENABLE = no # Audio output on port C6 +FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches +HD44780_ENABLE = no # Enable support for HD44780 based LCDs (+400) -OPT_DEFS = -DDEBUG_LEVEL=0 - -# custom matrix setup -CUSTOM_MATRIX = yes -SRC = matrix.c i2c.c backlight.c +SRC += i2c_master.c # programming options PROGRAM_CMD = ./util/atmega32a_program.py $(TARGET).hex diff --git a/quantum/quantum.c b/quantum/quantum.c index a62368ded29..a4ccccd00dd 100644 --- a/quantum/quantum.c +++ b/quantum/quantum.c @@ -1125,6 +1125,13 @@ static const uint8_t backlight_pin = BACKLIGHT_PIN; # define COMxx1 COM1A1 # define OCRxx OCR3A # define ICRx ICR3 +#elif defined(__AVR_ATmega32A__) && BACKLIGHT_PIN == D4 +# define TCCRxA TCCR1A +# define TCCRxB TCCR1B +# define COMxx1 COM1B1 +# define OCRxx OCR1B +# define ICRx ICR1 +# define TIMSK1 TIMSK #else # define NO_HARDWARE_PWM #endif From 0456bd668de37f118e717aabf00a132756ea619c Mon Sep 17 00:00:00 2001 From: Takeshi ISHII <2170248+mtei@users.noreply.github.com> Date: Tue, 9 Apr 2019 02:55:00 +0900 Subject: [PATCH 058/171] [Docs] update feature_rgblight.md: add some figures (#5578) * Added diagrams to illustrate the RGBLIGHT_LED_MAP macro and the `rgblight_set_clipping_range()` function. * change fig size * change fig size * update figs --- docs/feature_rgblight.md | 32 +++++++++++++++++++++++++++++--- 1 file changed, 29 insertions(+), 3 deletions(-) diff --git a/docs/feature_rgblight.md b/docs/feature_rgblight.md index c9323deb5eb..cba97cb417a 100644 --- a/docs/feature_rgblight.md +++ b/docs/feature_rgblight.md @@ -188,6 +188,7 @@ If you need to change your RGB lighting in code, for example in a macro to chang |`rgblight_increase_val_noeeprom()` |Increase the value for all LEDs. This wraps around at maximum value (not written to EEPROM) | |`rgblight_decrease_val()` |Decrease the value for all LEDs. This wraps around at minimum value | |`rgblight_decrease_val_noeeprom()` |Decrease the value for all LEDs. This wraps around at minimum value (not written to EEPROM) | +|`rgblight_set_clipping_range(pos, num)` |Set clipping Range | Additionally, [`rgblight_list.h`](https://github.com/qmk/qmk_firmware/blob/master/quantum/rgblight_list.h) defines several predefined shortcuts for various colors. Feel free to add to this list! @@ -195,15 +196,19 @@ Additionally, [`rgblight_list.h`](https://github.com/qmk/qmk_firmware/blob/maste If you want to make the logical order of LEDs different from the electrical connection order, you can do this by defining the `RGBLIGHT_LED_MAP` macro in your `config.h`. +Normally, the contents of the LED buffer are output to the LEDs in the same order. +simple dicrect + By defining `RGBLIGHT_LED_MAP` as in the example below, you can specify the LED with addressing in reverse order of the electrical connection order. ```c // config.h -#define RGBLED_NUM 10 -#define RGBLIGHT_LED_MAP { 9, 8, 7, 6, 5, 4, 3, 2, 1, 0 } +#define RGBLED_NUM 4 +#define RGBLIGHT_LED_MAP { 3, 2, 1, 0 } ``` +simple mapped For keyboards that use the RGB LEDs as a backlight for each key, you can also define it as in the example below. @@ -237,7 +242,28 @@ For keyboards that use the RGB LEDs as a backlight for each key, you can also de 29, 24, 19, 14, 9, 4 ) ``` +## Clipping Range -## Hardware Modification +Using the `rgblight_set_clipping_range()` function, you can prepare more buffers than the actual number of LEDs, and output some of the buffers to the LEDs. This is useful if you want the split keyboard to treat left and right LEDs as logically contiguous. + +You can set the Clipping Range by executing the following code. + +```c +// some soruce + rgblight_set_clipping_range(3, 4); +``` +clip direct + +In addition to setting the Clipping Range, you can use `RGBLIGHT_LED_MAP` together. + +```c +// config.h +#define RGBLED_NUM 8 +#define RGBLIGHT_LED_MAP { 7, 6, 5, 4, 3, 2, 1, 0 } + +// some soruce + rgblight_set_clipping_range(3, 4); +``` +clip mapped If your keyboard lacks onboard underglow LEDs, you may often be able to solder on an RGB LED strip yourself. You will need to find an unused pin to wire to the data pin of your LED strip. Some keyboards may break out unused pins from the MCU to make soldering easier. The other two pins, VCC and GND, must also be connected to the appropriate power pins. From 3e26886700a42fa6f66e934d4981b3e285784cd9 Mon Sep 17 00:00:00 2001 From: MechMerlin <30334081+mechmerlin@users.noreply.github.com> Date: Mon, 8 Apr 2019 10:55:36 -0700 Subject: [PATCH 059/171] [Keyboard] Refactor Singa (#5579) * pragma once it all * put amnesia's name everywhere * fixup readme * remove custom matrix * remove unneccessary configs * disable bootmagic * remove custom i2c in favor of i2c_master * fix rgb led num * add in rgb underglow support --- keyboards/singa/config.h | 9 +- keyboards/singa/i2c.c | 106 ------------------ keyboards/singa/i2c.h | 27 ----- keyboards/singa/keymaps/amnesia0287/config.h | 2 +- keyboards/singa/keymaps/amnesia0287/keymap.c | 2 +- keyboards/singa/keymaps/default/config.h | 2 +- keyboards/singa/keymaps/default/keymap.c | 2 +- keyboards/singa/keymaps/test/config.h | 2 +- keyboards/singa/keymaps/test/keymap.c | 2 +- keyboards/singa/matrix.c | 112 ------------------- keyboards/singa/readme.md | 8 +- keyboards/singa/rules.mk | 10 +- keyboards/singa/singa.c | 71 ++++++++---- keyboards/singa/singa.h | 7 +- keyboards/singa/usbconfig.h | 5 +- 15 files changed, 67 insertions(+), 300 deletions(-) delete mode 100644 keyboards/singa/i2c.c delete mode 100644 keyboards/singa/i2c.h delete mode 100644 keyboards/singa/matrix.c diff --git a/keyboards/singa/config.h b/keyboards/singa/config.h index 54cacee2e90..aca1153d714 100644 --- a/keyboards/singa/config.h +++ b/keyboards/singa/config.h @@ -15,8 +15,7 @@ You should have received a copy of the GNU General Public License along with this program. If not, see . */ -#ifndef CONFIG_H -#define CONFIG_H +#pragma once #include "config_common.h" @@ -25,7 +24,7 @@ along with this program. If not, see . #define MANUFACTURER Singa Keyboards #define PRODUCT Singa -#define RGBLED_NUM 16 +#define RGBLED_NUM 18 #define MATRIX_ROWS 7 #define MATRIX_COLS 15 @@ -40,7 +39,3 @@ along with this program. If not, see . #define NO_BACKLIGHT_CLOCK #define BACKLIGHT_LEVELS 1 #define RGBLIGHT_ANIMATIONS - -#define NO_UART 1 - -#endif diff --git a/keyboards/singa/i2c.c b/keyboards/singa/i2c.c deleted file mode 100644 index e8c4455ad1b..00000000000 --- a/keyboards/singa/i2c.c +++ /dev/null @@ -1,106 +0,0 @@ -/* -Copyright 2016 Luiz Ribeiro - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see . -*/ - -// Please do not modify this file - -#include -#include - -#include "i2c.h" - -void i2c_set_bitrate(uint16_t bitrate_khz) { - uint8_t bitrate_div = ((F_CPU / 1000l) / bitrate_khz); - if (bitrate_div >= 16) { - bitrate_div = (bitrate_div - 16) / 2; - } - TWBR = bitrate_div; -} - -void i2c_init(void) { - // set pull-up resistors on I2C bus pins - PORTC |= 0b11; - - i2c_set_bitrate(400); - - // enable TWI (two-wire interface) - TWCR |= (1 << TWEN); - - // enable TWI interrupt and slave address ACK - TWCR |= (1 << TWIE); - TWCR |= (1 << TWEA); -} - -uint8_t i2c_start(uint8_t address) { - // reset TWI control register - TWCR = 0; - - // begin transmission and wait for it to end - TWCR = (1< - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see . -*/ - -// Please do not modify this file - -#ifndef __I2C_H__ -#define __I2C_H__ - -void i2c_init(void); -void i2c_set_bitrate(uint16_t bitrate_khz); -uint8_t i2c_send(uint8_t address, uint8_t *data, uint16_t length); - -#endif diff --git a/keyboards/singa/keymaps/amnesia0287/config.h b/keyboards/singa/keymaps/amnesia0287/config.h index 0f756350514..e176ed34798 100644 --- a/keyboards/singa/keymaps/amnesia0287/config.h +++ b/keyboards/singa/keymaps/amnesia0287/config.h @@ -1,4 +1,4 @@ -/* Copyright 2018 REPLACE_WITH_YOUR_NAME +/* Copyright 2018 amnesia0287 * * This program is free software: you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by diff --git a/keyboards/singa/keymaps/amnesia0287/keymap.c b/keyboards/singa/keymaps/amnesia0287/keymap.c index cb0ceac1a81..dc52122db6b 100644 --- a/keyboards/singa/keymaps/amnesia0287/keymap.c +++ b/keyboards/singa/keymaps/amnesia0287/keymap.c @@ -1,4 +1,4 @@ -/* Copyright 2018 REPLACE_WITH_YOUR_NAME +/* Copyright 2018 amnesia0287 * * This program is free software: you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by diff --git a/keyboards/singa/keymaps/default/config.h b/keyboards/singa/keymaps/default/config.h index 4496c591006..93b81b57ba4 100644 --- a/keyboards/singa/keymaps/default/config.h +++ b/keyboards/singa/keymaps/default/config.h @@ -1,4 +1,4 @@ -/* Copyright 2018 REPLACE_WITH_YOUR_NAME +/* Copyright 2018 amnesia0287 * * This program is free software: you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by diff --git a/keyboards/singa/keymaps/default/keymap.c b/keyboards/singa/keymaps/default/keymap.c index d201f413b77..7beef8a64d8 100644 --- a/keyboards/singa/keymaps/default/keymap.c +++ b/keyboards/singa/keymaps/default/keymap.c @@ -1,4 +1,4 @@ -/* Copyright 2018 REPLACE_WITH_YOUR_NAME +/* Copyright 2018 amnesia0287 * * This program is free software: you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by diff --git a/keyboards/singa/keymaps/test/config.h b/keyboards/singa/keymaps/test/config.h index 0f756350514..e176ed34798 100644 --- a/keyboards/singa/keymaps/test/config.h +++ b/keyboards/singa/keymaps/test/config.h @@ -1,4 +1,4 @@ -/* Copyright 2018 REPLACE_WITH_YOUR_NAME +/* Copyright 2018 amnesia0287 * * This program is free software: you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by diff --git a/keyboards/singa/keymaps/test/keymap.c b/keyboards/singa/keymaps/test/keymap.c index 30f8de3b3de..a8f31b49c19 100644 --- a/keyboards/singa/keymaps/test/keymap.c +++ b/keyboards/singa/keymaps/test/keymap.c @@ -1,4 +1,4 @@ -/* Copyright 2018 REPLACE_WITH_YOUR_NAME +/* Copyright 2018 amnesia0287 * * This program is free software: you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by diff --git a/keyboards/singa/matrix.c b/keyboards/singa/matrix.c deleted file mode 100644 index 245813dfd2d..00000000000 --- a/keyboards/singa/matrix.c +++ /dev/null @@ -1,112 +0,0 @@ -/* -Copyright 2017 Luiz Ribeiro - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see . -*/ - -#include -#include - -#include "matrix.h" - -#ifndef DEBOUNCE -# define DEBOUNCE 5 -#endif - -static uint8_t debouncing = DEBOUNCE; - -static matrix_row_t matrix[MATRIX_ROWS]; -static matrix_row_t matrix_debouncing[MATRIX_ROWS]; - -void matrix_set_row_status(uint8_t row); -uint8_t bit_reverse(uint8_t x); - -void matrix_init(void) { - // all outputs for rows high - DDRB = 0xFF; - PORTB = 0xFF; - // all inputs for columns - DDRA = 0x00; - DDRC &= ~(0x111111<<2); - DDRD &= ~(1< 7 - (~PINA) & 0xFF - ) | ( - // cols 8..13, PORTC 7 -> 0 - bit_reverse((~PINC) & 0xFF) << 8 - ) | ( - // col 14, PORTD 7 - ((~PIND) & (1 << PIND7)) << 7 - ); - - if (matrix_debouncing[row] != cols) { - matrix_debouncing[row] = cols; - debouncing = DEBOUNCE; - } - } - - if (debouncing) { - if (--debouncing) { - _delay_ms(1); - } else { - for (uint8_t i = 0; i < MATRIX_ROWS; i++) { - matrix[i] = matrix_debouncing[i]; - } - } - } - - matrix_scan_quantum(); - - return 1; -} - -// declarations -void matrix_set_row_status(uint8_t row) { - DDRB = (1 << row); - PORTB = ~(1 << row); -} - -uint8_t bit_reverse(uint8_t x) { - x = ((x >> 1) & 0x55) | ((x << 1) & 0xaa); - x = ((x >> 2) & 0x33) | ((x << 2) & 0xcc); - x = ((x >> 4) & 0x0f) | ((x << 4) & 0xf0); - return x; -} - -inline matrix_row_t matrix_get_row(uint8_t row) { - return matrix[row]; -} - -void matrix_print(void) { -} diff --git a/keyboards/singa/readme.md b/keyboards/singa/readme.md index bdde361a8e7..4400717c800 100644 --- a/keyboards/singa/readme.md +++ b/keyboards/singa/readme.md @@ -4,7 +4,7 @@ ![Singa](https://i.imgur.com/VVO27Tr.jpg) -A short description of the keyboard/project +75% Custom Keyboard. Keyboard Maintainer: [amnesia0287](https://github.com/amnesia0287) @@ -38,9 +38,9 @@ macOS: ``` 3. Install the following packages: ``` - brew install python - brew install pyusb - brew install --HEAD`https://raw.githubusercontent.com/robertgzr/homebrew-tap/master/bootloadhid.rb + brew install python3 + pip3 install pyusb + brew install --HEAD https://raw.githubusercontent.com/robertgzr/homebrew-tap/master/bootloadhid.rb 4. Place your keyboard into reset. 5. Flash the board by typing `bootloadHID -r` followed by the path to your `.hex` file. diff --git a/keyboards/singa/rules.mk b/keyboards/singa/rules.mk index 68d50aec67a..7e46696891c 100644 --- a/keyboards/singa/rules.mk +++ b/keyboards/singa/rules.mk @@ -31,20 +31,18 @@ F_CPU = 12000000 BOOTLOADER = bootloadHID # build options -BOOTMAGIC_ENABLE = yes +BOOTMAGIC_ENABLE = no MOUSEKEY_ENABLE = yes EXTRAKEY_ENABLE = yes CONSOLE_ENABLE = yes COMMAND_ENABLE = yes -BACKLIGHT_ENABLE = no -RGBLIGHT_ENABLE = no +BACKLIGHT_ENABLE = yes +RGBLIGHT_ENABLE = yes RGBLIGHT_CUSTOM_DRIVER = yes OPT_DEFS = -DDEBUG_LEVEL=0 -# custom matrix setup -CUSTOM_MATRIX = yes -SRC = matrix.c i2c.c +SRC = i2c_master.c # programming options PROGRAM_CMD = ./util/atmega32a_program.py $(TARGET).hex diff --git a/keyboards/singa/singa.c b/keyboards/singa/singa.c index 0f5ec471a8e..26a7e463751 100644 --- a/keyboards/singa/singa.c +++ b/keyboards/singa/singa.c @@ -1,4 +1,4 @@ -/* Copyright 2018 REPLACE_WITH_YOUR_NAME +/* Copyright 2018 amnesia0287 * * This program is free software: you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -13,32 +13,57 @@ * You should have received a copy of the GNU General Public License * along with this program. If not, see . */ -#include QMK_KEYBOARD_H - -#include -#include "action_layer.h" -#include "i2c.h" +#include "rgblight.h" +#include "i2c_master.h" #include "quantum.h" +#ifdef RGBLIGHT_ENABLE +extern rgblight_config_t rgblight_config; -// for keyboard subdirectory level init functions -// @Override -void matrix_init_kb(void) { - // call user level keymaps, if any - matrix_init_user(); +void rgblight_set(void) { + if (!rgblight_config.enable) { + for (uint8_t i = 0; i < RGBLED_NUM; i++) { + led[i].r = 0; + led[i].g = 0; + led[i].b = 0; + } + } + + i2c_init(); + i2c_transmit(0xb0, (uint8_t*)led, 3 * RGBLED_NUM, 100); } +#endif -void matrix_scan_kb(void) { - matrix_scan_user(); - /* Nothing else for now. */ -} - -__attribute__((weak)) // overridable -void matrix_init_user(void) { - -} - -__attribute__((weak)) // overridable +__attribute__ ((weak)) void matrix_scan_user(void) { - +} + +void backlight_init_ports(void) { + // initialize pins D0, D1, D4 and D6 as output + setPinOutput(D0); + setPinOutput(D1); + setPinOutput(D4); + setPinOutput(D6); + + // turn RGB LEDs on + writePinHigh(D0); + writePinHigh(D1); + writePinHigh(D4); + writePinHigh(D6); +} + +void backlight_set(uint8_t level) { + if (level == 0) { + // turn RGB LEDs off + writePinLow(D0); + writePinLow(D1); + writePinLow(D4); + writePinLow(D6); + } else { + // turn RGB LEDs on + writePinHigh(D0); + writePinHigh(D1); + writePinHigh(D4); + writePinHigh(D6); + } } diff --git a/keyboards/singa/singa.h b/keyboards/singa/singa.h index 8221176c156..03b68488860 100644 --- a/keyboards/singa/singa.h +++ b/keyboards/singa/singa.h @@ -1,4 +1,4 @@ -/* Copyright 2018 REPLACE_WITH_YOUR_NAME +/* Copyright 2018 amnesia0287 * * This program is free software: you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -13,8 +13,7 @@ * You should have received a copy of the GNU General Public License * along with this program. If not, see . */ -#ifndef SINGA_H -#define SINGA_H +#pragma once #include "quantum.h" @@ -139,5 +138,3 @@ { k74, k81, k75, KC_NO, KC_NO, k76, KC_NO, KC_NO, k77, KC_NO, k82, KC_NO, k78, k79, k80 }, \ { KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, k15, k30 } \ } - -#endif diff --git a/keyboards/singa/usbconfig.h b/keyboards/singa/usbconfig.h index d2d848fcdc8..54a7d20f142 100644 --- a/keyboards/singa/usbconfig.h +++ b/keyboards/singa/usbconfig.h @@ -8,8 +8,7 @@ * This Revision: $Id: usbconfig-prototype.h 785 2010-05-30 17:57:07Z cs $ */ -#ifndef __usbconfig_h_included__ -#define __usbconfig_h_included__ +#pragma once #include "config.h" @@ -392,5 +391,3 @@ section at the end of this file). /* #define USB_INTR_PENDING EIFR */ #define USB_INTR_PENDING_BIT INTF1 #define USB_INTR_VECTOR INT1_vect - -#endif /* __usbconfig_h_included__ */ From 15d7c5f0bdfff97d5d7af6d474cc57d66b6bba94 Mon Sep 17 00:00:00 2001 From: MechMerlin <30334081+mechmerlin@users.noreply.github.com> Date: Mon, 8 Apr 2019 11:03:53 -0700 Subject: [PATCH 060/171] [Keyboard] Bootmagic does not actually work on BMC boards, removing from panc60 (#5573) * remove unneeded uart setting * use pragma once everywhere * remove custom matrix support * fixup readme * set bootmagic to lite * remove dependency on custom i2c code * use the right header files and function calls * remove bootmagic support as it doesn't work on bmc boards * readme merge artifacts removal --- keyboards/panc60/readme.md | 2 +- keyboards/panc60/rules.mk | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/keyboards/panc60/readme.md b/keyboards/panc60/readme.md index 737f238f6c8..3312a07ce73 100644 --- a/keyboards/panc60/readme.md +++ b/keyboards/panc60/readme.md @@ -14,7 +14,7 @@ Make example for this keyboard (after setting up your build environment): Flashing -**Reset Key:** Hold down the key located at `K40`, commonly programmed as left control while plugging in the keyboard. You may also hold down the key located at `K00`, commonly programmed as the `Esc` key. +**Reset Key:** Hold down the key located at `K40`, commonly programmed as left control while plugging in the keyboard. ps2avr(GB) boards use an atmega32a microcontroller and a different bootloader. It is not flashable using the regular QMK methods. diff --git a/keyboards/panc60/rules.mk b/keyboards/panc60/rules.mk index 8438751822b..5531807f185 100644 --- a/keyboards/panc60/rules.mk +++ b/keyboards/panc60/rules.mk @@ -31,7 +31,7 @@ F_CPU = 12000000 BOOTLOADER = bootloadHID # build options -BOOTMAGIC_ENABLE = lite +BOOTMAGIC_ENABLE = no MOUSEKEY_ENABLE = yes EXTRAKEY_ENABLE = yes CONSOLE_ENABLE = yes From da9bb590551e4e40552f301852074dffccd2c29d Mon Sep 17 00:00:00 2001 From: zvecr Date: Mon, 8 Apr 2019 19:35:47 +0100 Subject: [PATCH 061/171] [Keyboard] Refactor jj4x4 to current standards (#5567) * Refactor 4x4 in line with current ps2avrgb template * Add backlight pwm bodge till #4324 lands * Disable bootmagic lite as it seems to not work on atmega32a/bootloadHID --- keyboards/jj4x4/backlight.c | 213 ----------------------- keyboards/jj4x4/backlight_custom.h | 15 -- keyboards/jj4x4/breathing_custom.h | 140 --------------- keyboards/jj4x4/config.h | 25 ++- keyboards/jj4x4/i2c.c | 104 ----------- keyboards/jj4x4/i2c.h | 25 --- keyboards/jj4x4/jj4x4.c | 61 ++----- keyboards/jj4x4/jj4x4.h | 10 +- keyboards/jj4x4/keymaps/default/keymap.c | 89 +++++++--- keyboards/jj4x4/rules.mk | 40 +++-- keyboards/jj4x4/usbconfig.h | 4 +- 11 files changed, 121 insertions(+), 605 deletions(-) delete mode 100644 keyboards/jj4x4/backlight.c delete mode 100644 keyboards/jj4x4/backlight_custom.h delete mode 100644 keyboards/jj4x4/breathing_custom.h delete mode 100644 keyboards/jj4x4/i2c.c delete mode 100644 keyboards/jj4x4/i2c.h diff --git a/keyboards/jj4x4/backlight.c b/keyboards/jj4x4/backlight.c deleted file mode 100644 index fbd241fa9de..00000000000 --- a/keyboards/jj4x4/backlight.c +++ /dev/null @@ -1,213 +0,0 @@ -/** - * Backlighting code for PS2AVRGB boards (ATMEGA32A) - * Kenneth A. (github.com/krusli | krusli.me) - */ - -#include "backlight.h" -#include "quantum.h" - -#include -#include - -#include "backlight_custom.h" -#include "breathing_custom.h" - -// DEBUG -#include -#include - -// Port D: digital pins of the AVR chipset -#define NUMLOCK_PORT (1 << 0) // D0 -#define CAPSLOCK_PORT (1 << 1) // D1 -#define BACKLIGHT_PORT (1 << 4) // D4 -#define SCROLLLOCK_PORT (1 << 6) // D6 - -#define TIMER_CLK_DIV64 0x03 ///< Timer clocked at F_CPU/64 -#define TIMER1PRESCALE TIMER_CLK_DIV64 ///< timer 1 prescaler default - -#define TIMER_PRESCALE_MASK 0x07 ///< Timer Prescaler Bit-Mask - -#define PWM_MAX 0xFF -#define TIMER_TOP 255 // 8 bit PWM - -extern backlight_config_t backlight_config; - -/** - * References - * Port Registers: https://www.arduino.cc/en/Reference/PortManipulation - * TCCR1A: https://electronics.stackexchange.com/questions/92350/what-is-the-difference-between-tccr1a-and-tccr1b - * Timers: http://www.avrbeginners.net/architecture/timers/timers.html - * 16-bit timer setup: http://sculland.com/ATmega168/Interrupts-And-Timers/16-Bit-Timer-Setup/ - * PS2AVRGB firmware: https://github.com/showjean/ps2avrU/tree/master/firmware - */ - -// @Override -// turn LEDs on and off depending on USB caps/num/scroll lock states. -__attribute__ ((weak)) -void led_set_user(uint8_t usb_led) { - if (usb_led & (1 << USB_LED_NUM_LOCK)) { - // turn on - DDRD |= NUMLOCK_PORT; - PORTD |= NUMLOCK_PORT; - } else { - // turn off - DDRD &= ~NUMLOCK_PORT; - PORTD &= ~NUMLOCK_PORT; - } - - if (usb_led & (1 << USB_LED_CAPS_LOCK)) { - DDRD |= CAPSLOCK_PORT; - PORTD |= CAPSLOCK_PORT; - } else { - DDRD &= ~CAPSLOCK_PORT; - PORTD &= ~CAPSLOCK_PORT; - } - - if (usb_led & (1 << USB_LED_SCROLL_LOCK)) { - DDRD |= SCROLLLOCK_PORT; - PORTD |= SCROLLLOCK_PORT; - } else { - DDRD &= ~SCROLLLOCK_PORT; - PORTD &= ~SCROLLLOCK_PORT; - } -} - -#ifdef BACKLIGHT_ENABLE - -// sets up Timer 1 for 8-bit PWM -void timer1PWMSetup(void) { // NOTE ONLY CALL THIS ONCE - // default 8 bit mode - TCCR1A &= ~(1 << 1); // cbi(TCCR1A,PWM11); <- set PWM11 bit to HIGH - TCCR1A |= (1 << 0); // sbi(TCCR1A,PWM10); <- set PWM10 bit to LOW - - // clear output compare value A - // outb(OCR1AH, 0); - // outb(OCR1AL, 0); - - // clear output comparator registers for B - OCR1BH = 0; // outb(OCR1BH, 0); - OCR1BL = 0; // outb(OCR1BL, 0); -} - -bool is_init = false; -void timer1Init(void) { - // timer1SetPrescaler(TIMER1PRESCALE) - // set to DIV/64 - (TCCR1B) = ((TCCR1B) & ~TIMER_PRESCALE_MASK) | TIMER1PRESCALE; - - // reset TCNT1 - TCNT1H = 0; // outb(TCNT1H, 0); - TCNT1L = 0; // outb(TCNT1L, 0); - - // TOIE1: Timer Overflow Interrupt Enable (Timer 1); - TIMSK |= _BV(TOIE1); // sbi(TIMSK, TOIE1); - - is_init = true; -} - -void timer1UnInit(void) { - // set prescaler back to NONE - (TCCR1B) = ((TCCR1B) & ~TIMER_PRESCALE_MASK) | 0x00; // TIMERRTC_CLK_STOP - - // disable timer overflow interrupt - TIMSK &= ~_BV(TOIE1); // overflow bit? - - setPWM(0); - - is_init = false; -} - - -// handle TCNT1 overflow -//! Interrupt handler for tcnt1 overflow interrupt -ISR(TIMER1_OVF_vect, ISR_NOBLOCK) -{ - // sei(); - // handle breathing here - #ifdef BACKLIGHT_BREATHING - if (is_breathing()) { - custom_breathing_handler(); - } - #endif - - // TODO call user defined function -} - -// enable timer 1 PWM -// timer1PWMBOn() -void timer1PWMBEnable(void) { - // turn on channel B (OC1B) PWM output - // set OC1B as non-inverted PWM - TCCR1A |= _BV(COM1B1); - TCCR1A &= ~_BV(COM1B0); -} - -// disable timer 1 PWM -// timer1PWMBOff() -void timer1PWMBDisable(void) { - TCCR1A &= ~_BV(COM1B1); - TCCR1A &= ~_BV(COM1B0); -} - -void enableBacklight(void) { - DDRD |= BACKLIGHT_PORT; // set digital pin 4 as output - PORTD |= BACKLIGHT_PORT; // set digital pin 4 to high -} - -void disableBacklight(void) { - // DDRD &= ~BACKLIGHT_PORT; // set digital pin 4 as input - PORTD &= ~BACKLIGHT_PORT; // set digital pin 4 to low -} - -void startPWM(void) { - timer1Init(); - timer1PWMBEnable(); - enableBacklight(); -} - -void stopPWM(void) { - timer1UnInit(); - disableBacklight(); - timer1PWMBDisable(); -} - -void b_led_init_ports(void) { - /* turn backlight on/off depending on user preference */ - #if BACKLIGHT_ON_STATE == 0 - // DDRx register: sets the direction of Port D - // DDRD &= ~BACKLIGHT_PORT; // set digital pin 4 as input - PORTD &= ~BACKLIGHT_PORT; // set digital pin 4 to low - #else - DDRD |= BACKLIGHT_PORT; // set digital pin 4 as output - PORTD |= BACKLIGHT_PORT; // set digital pin 4 to high - #endif - - timer1PWMSetup(); - startPWM(); - - #ifdef BACKLIGHT_BREATHING - breathing_enable(); - #endif -} - -void b_led_set(uint8_t level) { - if (level > BACKLIGHT_LEVELS) { - level = BACKLIGHT_LEVELS; - } - - setPWM((int)(TIMER_TOP * (float) level / BACKLIGHT_LEVELS)); -} - -// called every matrix scan -void b_led_task(void) { - // do nothing for now -} - -void setPWM(uint16_t xValue) { - if (xValue > TIMER_TOP) { - xValue = TIMER_TOP; - } - OCR1B = xValue; // timer1PWMBSet(xValue); -} - -#endif // BACKLIGHT_ENABLE diff --git a/keyboards/jj4x4/backlight_custom.h b/keyboards/jj4x4/backlight_custom.h deleted file mode 100644 index 7210be840e0..00000000000 --- a/keyboards/jj4x4/backlight_custom.h +++ /dev/null @@ -1,15 +0,0 @@ -/** - * Backlighting code for PS2AVRGB boards (ATMEGA32A) - * Kenneth A. (github.com/krusli | krusli.me) - */ - -#ifndef BACKLIGHT_CUSTOM_H -#define BACKLIGHT_CUSTOM_H - -#include -void b_led_init_ports(void); -void b_led_set(uint8_t level); -void b_led_task(void); -void setPWM(uint16_t xValue); - -#endif // BACKLIGHT_CUSTOM_H diff --git a/keyboards/jj4x4/breathing_custom.h b/keyboards/jj4x4/breathing_custom.h deleted file mode 100644 index 71416b1b45d..00000000000 --- a/keyboards/jj4x4/breathing_custom.h +++ /dev/null @@ -1,140 +0,0 @@ -/** - * Breathing effect code for PS2AVRGB boards (ATMEGA32A) - * Works in conjunction with `backlight.c`. - * - * Code adapted from `quantum.c` to register with the existing TIMER1 overflow - * handler in `backlight.c` instead of setting up its own timer. - * Kenneth A. (github.com/krusli | krusli.me) - */ - -#ifdef BACKLIGHT_ENABLE -#ifdef BACKLIGHT_BREATHING - -#include "backlight_custom.h" - -#ifndef BREATHING_PERIOD -#define BREATHING_PERIOD 6 -#endif - -#define breathing_min() do {breathing_counter = 0;} while (0) -#define breathing_max() do {breathing_counter = breathing_period * 244 / 2;} while (0) - -// TODO make this share code with quantum.c - -#define BREATHING_NO_HALT 0 -#define BREATHING_HALT_OFF 1 -#define BREATHING_HALT_ON 2 -#define BREATHING_STEPS 128 - -static uint8_t breathing_period = BREATHING_PERIOD; -static uint8_t breathing_halt = BREATHING_NO_HALT; -static uint16_t breathing_counter = 0; - -static bool breathing = false; - -bool is_breathing(void) { - return breathing; -} - -// See http://jared.geek.nz/2013/feb/linear-led-pwm -static uint16_t cie_lightness(uint16_t v) { - if (v <= 5243) // if below 8% of max - return v / 9; // same as dividing by 900% - else { - uint32_t y = (((uint32_t) v + 10486) << 8) / (10486 + 0xFFFFUL); // add 16% of max and compare - // to get a useful result with integer division, we shift left in the expression above - // and revert what we've done again after squaring. - y = y * y * y >> 8; - if (y > 0xFFFFUL) // prevent overflow - return 0xFFFFU; - else - return (uint16_t) y; - } -} - -void breathing_enable(void) { - breathing = true; - breathing_counter = 0; - breathing_halt = BREATHING_NO_HALT; - // interrupt already registered -} - -void breathing_pulse(void) { - if (get_backlight_level() == 0) - breathing_min(); - else - breathing_max(); - breathing_halt = BREATHING_HALT_ON; - // breathing_interrupt_enable(); - breathing = true; -} - -void breathing_disable(void) { - breathing = false; - // backlight_set(get_backlight_level()); - b_led_set(get_backlight_level()); // custom implementation of backlight_set() -} - -void breathing_self_disable(void) -{ - if (get_backlight_level() == 0) - breathing_halt = BREATHING_HALT_OFF; - else - breathing_halt = BREATHING_HALT_ON; -} - -void breathing_toggle(void) { - if (is_breathing()) - breathing_disable(); - else - breathing_enable(); -} - -void breathing_period_set(uint8_t value) -{ - if (!value) - value = 1; - breathing_period = value; -} - -void breathing_period_default(void) { - breathing_period_set(BREATHING_PERIOD); -} - -void breathing_period_inc(void) -{ - breathing_period_set(breathing_period+1); -} - -void breathing_period_dec(void) -{ - breathing_period_set(breathing_period-1); -} - -/* To generate breathing curve in python: - * from math import sin, pi; [int(sin(x/128.0*pi)**4*255) for x in range(128)] - */ -static const uint8_t breathing_table[BREATHING_STEPS] PROGMEM = {0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 2, 3, 4, 5, 6, 8, 10, 12, 15, 17, 20, 24, 28, 32, 36, 41, 46, 51, 57, 63, 70, 76, 83, 91, 98, 106, 113, 121, 129, 138, 146, 154, 162, 170, 178, 185, 193, 200, 207, 213, 220, 225, 231, 235, 240, 244, 247, 250, 252, 253, 254, 255, 254, 253, 252, 250, 247, 244, 240, 235, 231, 225, 220, 213, 207, 200, 193, 185, 178, 170, 162, 154, 146, 138, 129, 121, 113, 106, 98, 91, 83, 76, 70, 63, 57, 51, 46, 41, 36, 32, 28, 24, 20, 17, 15, 12, 10, 8, 6, 5, 4, 3, 2, 1, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0}; - -// Use this before the cie_lightness function. -static inline uint16_t scale_backlight(uint16_t v) { - return v / BACKLIGHT_LEVELS * get_backlight_level(); -} - -void custom_breathing_handler(void) { - uint16_t interval = (uint16_t) breathing_period * 244 / BREATHING_STEPS; - // resetting after one period to prevent ugly reset at overflow. - breathing_counter = (breathing_counter + 1) % (breathing_period * 244); - uint8_t index = breathing_counter / interval % BREATHING_STEPS; - - if (((breathing_halt == BREATHING_HALT_ON) && (index == BREATHING_STEPS / 2)) || - ((breathing_halt == BREATHING_HALT_OFF) && (index == BREATHING_STEPS - 1))) - { - // breathing_interrupt_disable(); - } - - setPWM(cie_lightness(scale_backlight((uint16_t) pgm_read_byte(&breathing_table[index]) * 0x0101U))); -} - -#endif // BACKLIGHT_BREATHING -#endif // BACKLIGHT_ENABLE diff --git a/keyboards/jj4x4/config.h b/keyboards/jj4x4/config.h index 3ecdc06eaee..a8df46f016e 100644 --- a/keyboards/jj4x4/config.h +++ b/keyboards/jj4x4/config.h @@ -19,7 +19,6 @@ along with this program. If not, see . #include "config_common.h" - #define VENDOR_ID 0x20A0 #define PRODUCT_ID 0x422D // TODO: share these strings with usbconfig.h @@ -36,16 +35,24 @@ along with this program. If not, see . /* COL2ROW or ROW2COL */ #define DIODE_DIRECTION COL2ROW +#define BACKLIGHT_PIN D4 #define BACKLIGHT_LEVELS 12 -// #define BACKLIGHT_BREATHING // works, but BL_TOGG might not work +// #define BACKLIGHT_BREATHING // Requires #4324 to enable hardware pwm for atmega32a -#define TAPPING_TOGGLE 3 +/* RGB underglow */ +// NOTE: for PS2AVRGB boards, underglow commands are sent via I2C to 0xB0. +#define RGBLED_NUM 4 +#define RGBLIGHT_ANIMATIONS + +/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ +#define DEBOUNCING_DELAY 5 #define NO_UART 1 -/* RGB underglow */ -// The RGB_DI_PIN value seems to be shared between all PS2AVRGB boards. -// The same pin is used on the JJ40, at least. -#define RGBLED_NUM 5 -#define RGB_DI_PIN E2 // NOTE: for PS2AVRGB boards, underglow commands are sent via I2C to 0xB0. -#define RGBLIGHT_ANIMATIONS +/* key combination for magic key command */ +/* defined by default; to change, uncomment and set to the combination you want */ +// #define IS_COMMAND() (get_mods() == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT))) + +/* Bootmagic Lite key configuration */ +// #define BOOTMAGIC_LITE_ROW 0 +// #define BOOTMAGIC_LITE_COLUMN 0 diff --git a/keyboards/jj4x4/i2c.c b/keyboards/jj4x4/i2c.c deleted file mode 100644 index c27f3e3d17e..00000000000 --- a/keyboards/jj4x4/i2c.c +++ /dev/null @@ -1,104 +0,0 @@ -/* -Copyright 2016 Luiz Ribeiro - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see . -*/ - -#include -#include - -#include "i2c.h" - -void i2c_set_bitrate(uint16_t bitrate_khz) { - uint8_t bitrate_div = ((F_CPU / 1000l) / bitrate_khz); - if (bitrate_div >= 16) { - bitrate_div = (bitrate_div - 16) / 2; - } - TWBR = bitrate_div; -} - -void i2c_init(void) { - // set pull-up resistors on I2C bus pins - PORTC |= 0b11; - - i2c_set_bitrate(400); - - // enable TWI (two-wire interface) - TWCR |= (1 << TWEN); - - // enable TWI interrupt and slave address ACK - TWCR |= (1 << TWIE); - TWCR |= (1 << TWEA); -} - -uint8_t i2c_start(uint8_t address) { - // reset TWI control register - TWCR = 0; - - // begin transmission and wait for it to end - TWCR = (1< - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see . -*/ - -#ifndef __I2C_H__ -#define __I2C_H__ - -void i2c_init(void); -void i2c_set_bitrate(uint16_t bitrate_khz); -uint8_t i2c_send(uint8_t address, uint8_t *data, uint16_t length); - -#endif diff --git a/keyboards/jj4x4/jj4x4.c b/keyboards/jj4x4/jj4x4.c index 6fbff7afba6..265508b2d5b 100644 --- a/keyboards/jj4x4/jj4x4.c +++ b/keyboards/jj4x4/jj4x4.c @@ -18,53 +18,26 @@ along with this program. If not, see . #include "jj4x4.h" -#include +#ifdef RGBLIGHT_ENABLE -#include "action_layer.h" -#include "quantum.h" +#include +#include "i2c_master.h" +#include "rgblight.h" -#include "i2c.h" +extern rgblight_config_t rgblight_config; -#include "backlight.h" -#include "backlight_custom.h" - -// for keyboard subdirectory level init functions -// @Override void matrix_init_kb(void) { + i2c_init(); // call user level keymaps, if any matrix_init_user(); } - -#ifdef BACKLIGHT_ENABLE -/// Overrides functions in `quantum.c` -void backlight_init_ports(void) { - b_led_init_ports(); -} - -void backlight_task(void) { - b_led_task(); -} - -void backlight_set(uint8_t level) { - b_led_set(level); -} -#endif - -#ifdef RGBLIGHT_ENABLE -extern rgblight_config_t rgblight_config; - // custom RGB driver void rgblight_set(void) { if (!rgblight_config.enable) { - for (uint8_t i=0; i. #include "quantum.h" -void matrix_init_user(void); // TODO port this to other PS2AVRGB boards - +/* This a shortcut to help you visually see your layout. + * + * The first section contains all of the arguments representing the physical + * layout of the board and position of the keys. + * + * The second converts the arguments into a two-dimensional array which + * represents the switch matrix. + */ #define LAYOUT_ortho_4x4( \ K01, K02, K03, K04, \ K11, K12, K13, K14, \ diff --git a/keyboards/jj4x4/keymaps/default/keymap.c b/keyboards/jj4x4/keymaps/default/keymap.c index 51d4e7d6186..a0b06ee92a3 100644 --- a/keyboards/jj4x4/keymaps/default/keymap.c +++ b/keyboards/jj4x4/keymaps/default/keymap.c @@ -1,34 +1,73 @@ +/* Copyright 2019 + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ #include QMK_KEYBOARD_H +enum layers { + _BASE = 0, + _FN1, + _FN2, +}; -#define _QWERTY 0 - - +// Defines the keycodes used by our macros in process_record_user enum custom_keycodes { - QWERTY = SAFE_RANGE, + QMKBEST = SAFE_RANGE, + QMKURL }; const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { -/* Qwerty - * ,---------------------------. - * | A | B | C | D | - * +------+------+------+------| - * | E | F | G | H | - * +------+------+------+------| - * | I | J | K | L | - * +------+------+------+------| - * | M | N | O | P | - * ----------------------------' - */ -[_QWERTY] = LAYOUT_ortho_4x4( \ - KC_A, KC_B, KC_C, KC_D, \ - KC_E, KC_F, KC_G, KC_H, \ - KC_I, KC_J, KC_K, KC_L, \ - KC_M, KC_N, KC_O, KC_P \ -), + + [_BASE] = LAYOUT_ortho_4x4( + KC_PGUP, KC_HOME, KC_UP, KC_END , \ + KC_PGDN, KC_LEFT, KC_DOWN, KC_RGHT, \ + MO(_FN2), KC_VOLU, KC_MPLY, KC_MPRV, \ + MO(_FN1), KC_VOLD, KC_MUTE, KC_MNXT \ + ), + [_FN1] = LAYOUT_ortho_4x4( + KC_ESC, KC_P7, KC_P8, KC_P9, \ + KC_TAB, KC_P4, KC_P5, KC_P6, \ + KC_ENT, KC_P1, KC_P2, KC_P3, \ + _______, KC_P0, KC_P0, KC_DOT \ + ), + [_FN2] = LAYOUT_ortho_4x4( + RGB_TOG, RGB_HUI, RGB_SAI, RGB_VAI, \ + RGB_MOD, RGB_HUD, RGB_SAD, RGB_VAD, \ + _______, _______, _______, RESET, \ + BL_STEP, _______, QMKBEST, QMKURL \ + ) + }; -// Loop -void matrix_scan_user(void) { - // Empty -}; +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + switch (keycode) { + case QMKBEST: + if (record->event.pressed) { + // when keycode QMKBEST is pressed + SEND_STRING("QMK is the best thing ever!"); + } else { + // when keycode QMKBEST is released + } + break; + case QMKURL: + if (record->event.pressed) { + // when keycode QMKURL is pressed + SEND_STRING("https://qmk.fm/" SS_TAP(X_ENTER)); + } else { + // when keycode QMKURL is released + } + break; + } + return true; +} diff --git a/keyboards/jj4x4/rules.mk b/keyboards/jj4x4/rules.mk index d99aebbd20d..3ac2cc04329 100644 --- a/keyboards/jj4x4/rules.mk +++ b/keyboards/jj4x4/rules.mk @@ -30,27 +30,29 @@ F_CPU = 12000000 # automatically (+60). See bootloader.mk for all options. BOOTLOADER = bootloadHID -# build options -BOOTMAGIC_ENABLE = no -MOUSEKEY_ENABLE = no -EXTRAKEY_ENABLE = yes -CONSOLE_ENABLE = no -COMMAND_ENABLE = yes - -BACKLIGHT_ENABLE = yes -BACKLIGHT_CUSTOM_DRIVER = yes - -RGBLIGHT_ENABLE = yes -RGBLIGHT_CUSTOM_DRIVER = yes - -KEY_LOCK_ENABLE = yes - +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = no # Mouse keys(+4700) +EXTRAKEY_ENABLE = yes # Audio control and System control(+450) +CONSOLE_ENABLE = no # Console for debug(+400) +COMMAND_ENABLE = no # Commands for debug and configuration # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE -SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend +# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +NKRO_ENABLE = no # USB Nkey Rollover +BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality on B7 by default +RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow +RGBLIGHT_CUSTOM_DRIVER = yes +MIDI_ENABLE = no # MIDI support (+2400 to 4200, depending on config) +UNICODE_ENABLE = no # Unicode +BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID +AUDIO_ENABLE = no # Audio output on port C6 +FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches +HD44780_ENABLE = no # Enable support for HD44780 based LCDs (+400) -OPT_DEFS = -DDEBUG_LEVEL=0 - -SRC = i2c.c backlight.c +SRC += i2c_master.c # programming options PROGRAM_CMD = ./util/atmega32a_program.py $(TARGET).hex diff --git a/keyboards/jj4x4/usbconfig.h b/keyboards/jj4x4/usbconfig.h index ad97e7f0a38..a7653bde86e 100644 --- a/keyboards/jj4x4/usbconfig.h +++ b/keyboards/jj4x4/usbconfig.h @@ -252,8 +252,8 @@ section at the end of this file). * obdev's free shared VID/PID pair. See the file USB-IDs-for-free.txt for * details. */ -#define USB_CFG_DEVICE_NAME 'j', 'j', '4', '0' -#define USB_CFG_DEVICE_NAME_LEN 4 +#define USB_CFG_DEVICE_NAME 'j', 'j', '4', 'x', '4' +#define USB_CFG_DEVICE_NAME_LEN 5 /* Same as above for the device name. If you don't want a device name, undefine * the macros. See the file USB-IDs-for-free.txt before you assign a name if * you use a shared VID/PID. From f8d365a47847f8e49fde5096aa065dbee08cf728 Mon Sep 17 00:00:00 2001 From: Drashna Jaelre Date: Mon, 8 Apr 2019 12:43:03 -0700 Subject: [PATCH 062/171] Convert BFO9000 to Split Keyboard code (#5568) --- keyboards/keebio/bfo9000/bfo9000.h | 13 +- keyboards/keebio/bfo9000/config.h | 3 + keyboards/keebio/bfo9000/i2c.c | 162 ------------ keyboards/keebio/bfo9000/i2c.h | 49 ---- keyboards/keebio/bfo9000/matrix.c | 342 -------------------------- keyboards/keebio/bfo9000/rules.mk | 11 +- keyboards/keebio/bfo9000/serial.c | 230 ----------------- keyboards/keebio/bfo9000/serial.h | 27 -- keyboards/keebio/bfo9000/split_util.c | 86 ------- keyboards/keebio/bfo9000/split_util.h | 20 -- 10 files changed, 7 insertions(+), 936 deletions(-) delete mode 100644 keyboards/keebio/bfo9000/i2c.c delete mode 100644 keyboards/keebio/bfo9000/i2c.h delete mode 100644 keyboards/keebio/bfo9000/matrix.c delete mode 100644 keyboards/keebio/bfo9000/serial.c delete mode 100644 keyboards/keebio/bfo9000/serial.h delete mode 100644 keyboards/keebio/bfo9000/split_util.c delete mode 100644 keyboards/keebio/bfo9000/split_util.h diff --git a/keyboards/keebio/bfo9000/bfo9000.h b/keyboards/keebio/bfo9000/bfo9000.h index c3bd2236cef..985c7f67f13 100644 --- a/keyboards/keebio/bfo9000/bfo9000.h +++ b/keyboards/keebio/bfo9000/bfo9000.h @@ -1,16 +1,7 @@ -#ifndef BFO9000_H -#define BFO9000_H +#pragma once #include "quantum.h" -#ifdef USE_I2C -#include -#ifdef __AVR__ - #include - #include -#endif -#endif - #define LAYOUT( \ L00, L01, L02, L03, L04, L05, L06, L07, L08, R00, R01, R02, R03, R04, R05, R06, R07, R08, \ L10, L11, L12, L13, L14, L15, L16, L17, L18, R10, R11, R12, R13, R14, R15, R16, R17, R18, \ @@ -33,5 +24,3 @@ { R40, R41, R42, R43, R44, R45, R46, R47, R48 }, \ { R50, R51, R52, R53, R54, R55, R56, R57, R58 } \ } - -#endif diff --git a/keyboards/keebio/bfo9000/config.h b/keyboards/keebio/bfo9000/config.h index 5dc2bd43436..c5afb265f3c 100644 --- a/keyboards/keebio/bfo9000/config.h +++ b/keyboards/keebio/bfo9000/config.h @@ -45,6 +45,9 @@ along with this program. If not, see . /* Locking resynchronize hack */ #define LOCKING_RESYNC_ENABLE +/* serial.c configuration for split keyboard */ +#define SOFT_SERIAL_PIN D0 + /* ws2812 RGB LED */ #define RGB_DI_PIN B4 #define RGBLED_NUM 20 // Number of LEDs diff --git a/keyboards/keebio/bfo9000/i2c.c b/keyboards/keebio/bfo9000/i2c.c deleted file mode 100644 index 084c890c405..00000000000 --- a/keyboards/keebio/bfo9000/i2c.c +++ /dev/null @@ -1,162 +0,0 @@ -#include -#include -#include -#include -#include -#include -#include "i2c.h" - -#ifdef USE_I2C - -// Limits the amount of we wait for any one i2c transaction. -// Since were running SCL line 100kHz (=> 10μs/bit), and each transactions is -// 9 bits, a single transaction will take around 90μs to complete. -// -// (F_CPU/SCL_CLOCK) => # of μC cycles to transfer a bit -// poll loop takes at least 8 clock cycles to execute -#define I2C_LOOP_TIMEOUT (9+1)*(F_CPU/SCL_CLOCK)/8 - -#define BUFFER_POS_INC() (slave_buffer_pos = (slave_buffer_pos+1)%SLAVE_BUFFER_SIZE) - -volatile uint8_t i2c_slave_buffer[SLAVE_BUFFER_SIZE]; - -static volatile uint8_t slave_buffer_pos; -static volatile bool slave_has_register_set = false; - -// Wait for an i2c operation to finish -inline static -void i2c_delay(void) { - uint16_t lim = 0; - while(!(TWCR & (1<10. - // Check datasheets for more info. - TWBR = ((F_CPU/SCL_CLOCK)-16)/2; -} - -// Start a transaction with the given i2c slave address. The direction of the -// transfer is set with I2C_READ and I2C_WRITE. -// returns: 0 => success -// 1 => error -uint8_t i2c_master_start(uint8_t address) { - TWCR = (1< slave ACK -// 1 => slave NACK -uint8_t i2c_master_write(uint8_t data) { - TWDR = data; - TWCR = (1<= SLAVE_BUFFER_SIZE ) { - ack = 0; - slave_buffer_pos = 0; - } - slave_has_register_set = true; - } else { - i2c_slave_buffer[slave_buffer_pos] = TWDR; - BUFFER_POS_INC(); - } - break; - - case TW_ST_SLA_ACK: - case TW_ST_DATA_ACK: - // master has addressed this device as a slave transmitter and is - // requesting data. - TWDR = i2c_slave_buffer[slave_buffer_pos]; - BUFFER_POS_INC(); - break; - - case TW_BUS_ERROR: // something went wrong, reset twi state - TWCR = 0; - default: - break; - } - // Reset everything, so we are ready for the next TWI interrupt - TWCR |= (1< - -#ifndef F_CPU -#define F_CPU 16000000UL -#endif - -#define I2C_READ 1 -#define I2C_WRITE 0 - -#define I2C_ACK 1 -#define I2C_NACK 0 - -#define SLAVE_BUFFER_SIZE 0x10 - -// i2c SCL clock frequency -#define SCL_CLOCK 400000L - -extern volatile uint8_t i2c_slave_buffer[SLAVE_BUFFER_SIZE]; - -void i2c_master_init(void); -uint8_t i2c_master_start(uint8_t address); -void i2c_master_stop(void); -uint8_t i2c_master_write(uint8_t data); -uint8_t i2c_master_read(int); -void i2c_reset_state(void); -void i2c_slave_init(uint8_t address); - - -static inline unsigned char i2c_start_read(unsigned char addr) { - return i2c_master_start((addr << 1) | I2C_READ); -} - -static inline unsigned char i2c_start_write(unsigned char addr) { - return i2c_master_start((addr << 1) | I2C_WRITE); -} - -// from SSD1306 scrips -extern unsigned char i2c_rep_start(unsigned char addr); -extern void i2c_start_wait(unsigned char addr); -extern unsigned char i2c_readAck(void); -extern unsigned char i2c_readNak(void); -extern unsigned char i2c_read(unsigned char ack); - -#define i2c_read(ack) (ack) ? i2c_readAck() : i2c_readNak(); - -#endif diff --git a/keyboards/keebio/bfo9000/matrix.c b/keyboards/keebio/bfo9000/matrix.c deleted file mode 100644 index 2ca5f4d87ab..00000000000 --- a/keyboards/keebio/bfo9000/matrix.c +++ /dev/null @@ -1,342 +0,0 @@ -/* -Copyright 2012 Jun Wako - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see . -*/ - -/* - * scan matrix - */ -#include -#include -#ifdef USE_I2C -// provides memcpy for copying TWI slave buffer -// #include -#endif -#include -#include -#include -#include -#include "print.h" -#include "debug.h" -#include "util.h" -#include "matrix.h" -#include "split_util.h" -#include "pro_micro.h" -#include "config.h" - -#ifdef USE_I2C -# include "i2c.h" -#else // USE_SERIAL -# include "serial.h" -#endif - -#ifndef DEBOUNCE -# define DEBOUNCE 5 -#endif - -#define ERROR_DISCONNECT_COUNT 5 - -static uint8_t debouncing = DEBOUNCE; -static const int ROWS_PER_HAND = MATRIX_ROWS/2; -static uint8_t error_count = 0; - -static const uint8_t row_pins[MATRIX_ROWS] = MATRIX_ROW_PINS; -static const uint8_t col_pins[MATRIX_COLS] = MATRIX_COL_PINS; - -/* matrix state(1:on, 0:off) */ -static matrix_row_t matrix[MATRIX_ROWS]; -static matrix_row_t matrix_debouncing[MATRIX_ROWS]; - -static matrix_row_t read_cols(void); -static void init_cols(void); -static void unselect_rows(void); -static void select_row(uint8_t row); - - -__attribute__ ((weak)) -void matrix_init_kb(void) { - matrix_init_user(); -} - -__attribute__ ((weak)) -void matrix_scan_kb(void) { - matrix_scan_user(); -} - -__attribute__ ((weak)) -void matrix_init_user(void) { -} - -__attribute__ ((weak)) -void matrix_scan_user(void) { -} - -inline -uint8_t matrix_rows(void) -{ - return MATRIX_ROWS; -} - -inline -uint8_t matrix_cols(void) -{ - return MATRIX_COLS; -} - -void matrix_init(void) -{ - debug_enable = true; - debug_matrix = true; - debug_mouse = true; - // initialize row and col - unselect_rows(); - init_cols(); - - TX_RX_LED_INIT; - - // initialize matrix state: all keys off - for (uint8_t i=0; i < MATRIX_ROWS; i++) { - matrix[i] = 0; - matrix_debouncing[i] = 0; - } - - matrix_init_quantum(); -} - -uint8_t _matrix_scan(void) -{ - // Right hand is stored after the left in the matrix so, we need to offset it - int offset = isLeftHand ? 0 : (ROWS_PER_HAND); - - for (uint8_t i = 0; i < ROWS_PER_HAND; i++) { - select_row(i); - _delay_us(30); // without this wait read unstable value. - matrix_row_t cols = read_cols(); - if (matrix_debouncing[i+offset] != cols) { - matrix_debouncing[i+offset] = cols; - debouncing = DEBOUNCE; - } - unselect_rows(); - } - - if (debouncing) { - if (--debouncing) { - _delay_ms(1); - } else { - for (uint8_t i = 0; i < ROWS_PER_HAND; i++) { - matrix[i+offset] = matrix_debouncing[i+offset]; - } - } - } - - return 1; -} - -#ifdef USE_I2C - -// Get rows from other half over i2c -int i2c_transaction(void) { - int slaveOffset = (isLeftHand) ? (ROWS_PER_HAND) : 0; - - int err = i2c_master_start(SLAVE_I2C_ADDRESS + I2C_WRITE); - if (err) goto i2c_error; - - // start of matrix stored at 0x00 - err = i2c_master_write(0x00); - if (err) goto i2c_error; - - // Start read - err = i2c_master_start(SLAVE_I2C_ADDRESS + I2C_READ); - if (err) goto i2c_error; - - if (!err) { - /* - // read from TWI byte-by-byte into matrix_row_t memory space - size_t i; - for (i = 0; i < SLAVE_BUFFER_SIZE-1; ++i) { - *((uint8_t*)&matrix[slaveOffset]+i) = i2c_master_read(I2C_ACK); - } - // last byte to be read / end of chunk - *((uint8_t*)&matrix[slaveOffset]+i) = i2c_master_read(I2C_NACK); - */ - - // kludge for column #9: unpack bits for keys (2,9) and (3,9) from (1,7) and (1,8) - // i2c_master_read(I2C_ACK); - matrix[slaveOffset+0] = i2c_master_read(I2C_ACK); - // i2c_master_read(I2C_ACK); - matrix[slaveOffset+1] = (matrix_row_t)i2c_master_read(I2C_ACK)\ - | (matrix[slaveOffset+0]&0x40U)<<2; - // i2c_master_read(I2C_ACK); - matrix[slaveOffset+2] = (matrix_row_t)i2c_master_read(I2C_NACK)\ - | (matrix[slaveOffset+0]&0x80U)<<1; - // clear highest two bits on row 1, where the col9 bits were transported - matrix[slaveOffset+0] &= 0x3F; - - i2c_master_stop(); - } else { -i2c_error: // the cable is disconnected, or something else went wrong - i2c_reset_state(); - return err; - } - - return 0; -} - -#else // USE_SERIAL - -int serial_transaction(void) { - int slaveOffset = (isLeftHand) ? (ROWS_PER_HAND) : 0; - - if (serial_update_buffers()) { - return 1; - } - - for (int i = 0; i < ROWS_PER_HAND; ++i) { - matrix[slaveOffset+i] = serial_slave_buffer[i]; - } - return 0; -} -#endif - -uint8_t matrix_scan(void) -{ - int ret = _matrix_scan(); - - - -#ifdef USE_I2C - if( i2c_transaction() ) { -#else // USE_SERIAL - if( serial_transaction() ) { -#endif - // turn on the indicator led when halves are disconnected - TXLED1; - - error_count++; - - if (error_count > ERROR_DISCONNECT_COUNT) { - // reset other half if disconnected - int slaveOffset = (isLeftHand) ? (ROWS_PER_HAND) : 0; - for (int i = 0; i < ROWS_PER_HAND; ++i) { - matrix[slaveOffset+i] = 0; - } - } - } else { - // turn off the indicator led on no error - TXLED0; - error_count = 0; - } - matrix_scan_quantum(); - return ret; -} - -void matrix_slave_scan(void) { - _matrix_scan(); - - int offset = (isLeftHand) ? 0 : ROWS_PER_HAND; - -#ifdef USE_I2C - // SLAVE_BUFFER_SIZE is from i2c.h - // (MATRIX_ROWS/2*sizeof(matrix_row_t)) - // memcpy((void*)i2c_slave_buffer, (const void*)&matrix[offset], (ROWS_PER_HAND*sizeof(matrix_row_t))); - - // kludge for column #9: put bits for keys (2,9) and (3,9) into (1,7) and (1,8) - i2c_slave_buffer[0] = (uint8_t)(matrix[offset+0])\ - | (matrix[offset+1]&0x100U)>>2\ - | (matrix[offset+2]&0x100U)>>1; - i2c_slave_buffer[1] = (uint8_t)(matrix[offset+1]); - i2c_slave_buffer[2] = (uint8_t)(matrix[offset+2]); - // note: looks like a possible operator-precedence bug here, in last version? - /* - i2c_slave_buffer[1] = (uint8_t)matrix[offset+0]; - i2c_slave_buffer[2] = (uint8_t)(matrix[offset+1]>>8); - i2c_slave_buffer[3] = (uint8_t)(matrix[offset+1]>>8); - i2c_slave_buffer[4] = (uint8_t)(matrix[offset+2]>>8); - i2c_slave_buffer[5] = (uint8_t)matrix[offset+2]; - */ -#else // USE_SERIAL - for (int i = 0; i < ROWS_PER_HAND; ++i) { - serial_slave_buffer[i] = matrix[offset+i]; - } -#endif -} - -bool matrix_is_modified(void) -{ - if (debouncing) return false; - return true; -} - -inline -bool matrix_is_on(uint8_t row, uint8_t col) -{ - return (matrix[row] & ((matrix_row_t)1<> 4) + 1) &= ~_BV(col_pins[x] & 0xF); - _SFR_IO8((col_pins[x] >> 4) + 2) |= _BV(col_pins[x] & 0xF); - } -} - -static matrix_row_t read_cols(void) -{ - matrix_row_t result = 0; - for(int x = 0; x < MATRIX_COLS; x++) { - result |= (_SFR_IO8(col_pins[x] >> 4) & _BV(col_pins[x] & 0xF)) ? 0 : (1 << x); - } - return result; -} - -static void unselect_rows(void) -{ - for(int x = 0; x < ROWS_PER_HAND; x++) { - _SFR_IO8((row_pins[x] >> 4) + 1) &= ~_BV(row_pins[x] & 0xF); - _SFR_IO8((row_pins[x] >> 4) + 2) |= _BV(row_pins[x] & 0xF); - } -} - -static void select_row(uint8_t row) -{ - _SFR_IO8((row_pins[row] >> 4) + 1) |= _BV(row_pins[row] & 0xF); - _SFR_IO8((row_pins[row] >> 4) + 2) &= ~_BV(row_pins[row] & 0xF); -} diff --git a/keyboards/keebio/bfo9000/rules.mk b/keyboards/keebio/bfo9000/rules.mk index d11f9a54e7c..3ebe39a902f 100644 --- a/keyboards/keebio/bfo9000/rules.mk +++ b/keyboards/keebio/bfo9000/rules.mk @@ -1,8 +1,3 @@ -SRC += matrix.c \ - i2c.c \ - split_util.c \ - serial.c - # MCU name #MCU = at90usb1287 MCU = atmega32u4 @@ -41,7 +36,7 @@ F_USB = $(F_CPU) # Bootloader # This definition is optional, and if your keyboard supports multiple bootloaders of -# different sizes, comment this out, and the correct address will be loaded +# different sizes, comment this out, and the correct address will be loaded # automatically (+60). See bootloader.mk for all options. BOOTLOADER = caterina @@ -63,8 +58,8 @@ MIDI_ENABLE = no # MIDI controls AUDIO_ENABLE = no # Audio output on port C6 UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID -RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. +RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend -CUSTOM_MATRIX = yes +SPLIT_KEYBOARD = yes diff --git a/keyboards/keebio/bfo9000/serial.c b/keyboards/keebio/bfo9000/serial.c deleted file mode 100644 index fea57b65101..00000000000 --- a/keyboards/keebio/bfo9000/serial.c +++ /dev/null @@ -1,230 +0,0 @@ -/* - * WARNING: be careful changing this code, it is very timing dependent - */ - -#ifndef F_CPU -#define F_CPU 16000000 -#endif - -#include -#include -#include -#include -#include "serial.h" - -#ifndef USE_I2C - -// Serial pulse period in microseconds. Its probably a bad idea to lower this -// value. -#define SERIAL_DELAY 24 - -matrix_row_t volatile serial_slave_buffer[SERIAL_SLAVE_BUFFER_LENGTH] = {0}; -matrix_row_t volatile serial_master_buffer[SERIAL_MASTER_BUFFER_LENGTH] = {0}; - -#define ROW_MASK (((matrix_row_t)0-1)>>(8*sizeof(matrix_row_t)-MATRIX_COLS)) - -#define SLAVE_DATA_CORRUPT (1<<0) -volatile uint8_t status = 0; - -inline static -void serial_delay(void) { - _delay_us(SERIAL_DELAY); -} - -inline static -void serial_output(void) { - SERIAL_PIN_DDR |= SERIAL_PIN_MASK; -} - -// make the serial pin an input with pull-up resistor -inline static -void serial_input(void) { - SERIAL_PIN_DDR &= ~SERIAL_PIN_MASK; - SERIAL_PIN_PORT |= SERIAL_PIN_MASK; -} - -inline static -matrix_row_t serial_read_pin(void) { - return !!(SERIAL_PIN_INPUT & SERIAL_PIN_MASK); -} - -inline static -void serial_low(void) { - SERIAL_PIN_PORT &= ~SERIAL_PIN_MASK; -} - -inline static -void serial_high(void) { - SERIAL_PIN_PORT |= SERIAL_PIN_MASK; -} - -void serial_master_init(void) { - serial_output(); - serial_high(); -} - -void serial_slave_init(void) { - serial_input(); - - // Enable INT0 - EIMSK |= _BV(INT0); - // Trigger on falling edge of INT0 - EICRA &= ~(_BV(ISC00) | _BV(ISC01)); -} - -// Used by the master to synchronize timing with the slave. -static -void sync_recv(void) { - serial_input(); - // This shouldn't hang if the slave disconnects because the - // serial line will float to high if the slave does disconnect. - while (!serial_read_pin()); - serial_delay(); -} - -// Used by the slave to send a synchronization signal to the master. -static -void sync_send(void) { - serial_output(); - - serial_low(); - serial_delay(); - - serial_high(); -} - -// Reads a byte from the serial line -static -matrix_row_t serial_read_byte(void) { - matrix_row_t byte = 0; - serial_input(); - for ( uint8_t i = 0; i < MATRIX_COLS; ++i) { - byte = (byte << 1) | serial_read_pin(); - serial_delay(); - _delay_us(1); - } - - return byte; -} - -// Sends a byte with MSB ordering -static -void serial_write_byte(matrix_row_t data) { - matrix_row_t b = MATRIX_COLS; - serial_output(); - while( b-- ) { - if(data & (1UL << b)) { - serial_high(); - } else { - serial_low(); - } - serial_delay(); - } -} - -// interrupt handle to be used by the slave device -ISR(SERIAL_PIN_INTERRUPT) { - sync_send(); - - matrix_row_t checksum = 0; - for (int i = 0; i < SERIAL_SLAVE_BUFFER_LENGTH; ++i) { - serial_write_byte(serial_slave_buffer[i]); - sync_send(); - checksum += ROW_MASK & serial_slave_buffer[i]; - } - serial_write_byte(checksum); - sync_send(); - - // wait for the sync to finish sending - serial_delay(); - - // read the middle of pulses - _delay_us(SERIAL_DELAY/2); - - matrix_row_t checksum_computed = 0; - for (int i = 0; i < SERIAL_MASTER_BUFFER_LENGTH; ++i) { - serial_master_buffer[i] = serial_read_byte(); - sync_send(); - checksum_computed += ROW_MASK & serial_master_buffer[i]; - } - matrix_row_t checksum_received = serial_read_byte(); - sync_send(); - - serial_input(); // end transaction - - if ( checksum_computed != checksum_received ) { - status |= SLAVE_DATA_CORRUPT; - } else { - status &= ~SLAVE_DATA_CORRUPT; - } -} - -inline -bool serial_slave_DATA_CORRUPT(void) { - return status & SLAVE_DATA_CORRUPT; -} - -// Copies the serial_slave_buffer to the master and sends the -// serial_master_buffer to the slave. -// -// Returns: -// 0 => no error -// 1 => slave did not respond -int serial_update_buffers(void) { - // this code is very time dependent, so we need to disable interrupts - cli(); - - // signal to the slave that we want to start a transaction - serial_output(); - serial_low(); - _delay_us(1); - - // wait for the slaves response - serial_input(); - serial_high(); - _delay_us(SERIAL_DELAY); - - // check if the slave is present - if (serial_read_pin()) { - // slave failed to pull the line low, assume not present - sei(); - return 1; - } - - // if the slave is present syncronize with it - sync_recv(); - - matrix_row_t checksum_computed = 0; - // receive data from the slave - for (int i = 0; i < SERIAL_SLAVE_BUFFER_LENGTH; ++i) { - serial_slave_buffer[i] = serial_read_byte(); - sync_recv(); - checksum_computed += ROW_MASK & serial_slave_buffer[i]; - } - matrix_row_t checksum_received = serial_read_byte(); - sync_recv(); - - if (checksum_computed != checksum_received) { - sei(); - return 1; - } - - matrix_row_t checksum = 0; - // send data to the slave - for (int i = 0; i < SERIAL_MASTER_BUFFER_LENGTH; ++i) { - serial_write_byte(serial_master_buffer[i]); - sync_recv(); - checksum += ROW_MASK & serial_master_buffer[i]; - } - serial_write_byte(checksum); - sync_recv(); - - // always, release the line when not in use - serial_output(); - serial_high(); - - sei(); - return 0; -} - -#endif diff --git a/keyboards/keebio/bfo9000/serial.h b/keyboards/keebio/bfo9000/serial.h deleted file mode 100644 index 62761945721..00000000000 --- a/keyboards/keebio/bfo9000/serial.h +++ /dev/null @@ -1,27 +0,0 @@ -#ifndef MY_SERIAL_H -#define MY_SERIAL_H - -#include "config.h" -#include "matrix.h" -#include - -/* TODO: some defines for interrupt setup */ -#define SERIAL_PIN_DDR DDRD -#define SERIAL_PIN_PORT PORTD -#define SERIAL_PIN_INPUT PIND -#define SERIAL_PIN_MASK _BV(PD0) -#define SERIAL_PIN_INTERRUPT INT0_vect - -#define SERIAL_SLAVE_BUFFER_LENGTH MATRIX_ROWS/2 -#define SERIAL_MASTER_BUFFER_LENGTH 1 - -// Buffers for master - slave communication -extern volatile matrix_row_t serial_slave_buffer[SERIAL_SLAVE_BUFFER_LENGTH]; -extern volatile matrix_row_t serial_master_buffer[SERIAL_MASTER_BUFFER_LENGTH]; - -void serial_master_init(void); -void serial_slave_init(void); -int serial_update_buffers(void); -bool serial_slave_data_corrupt(void); - -#endif diff --git a/keyboards/keebio/bfo9000/split_util.c b/keyboards/keebio/bfo9000/split_util.c deleted file mode 100644 index 7f200e6c942..00000000000 --- a/keyboards/keebio/bfo9000/split_util.c +++ /dev/null @@ -1,86 +0,0 @@ -#include -#include -#include -#include -#include -#include -#include "split_util.h" -#include "matrix.h" -#include "keyboard.h" -#include "config.h" -#include "timer.h" - -#ifdef USE_I2C -# include "i2c.h" -#else -# include "serial.h" -#endif - -volatile bool isLeftHand = true; - -static void setup_handedness(void) { - #ifdef EE_HANDS - isLeftHand = eeprom_read_byte(EECONFIG_HANDEDNESS); - #else - // I2C_MASTER_RIGHT is deprecated, use MASTER_RIGHT instead, since this works for both serial and i2c - #if defined(I2C_MASTER_RIGHT) || defined(MASTER_RIGHT) - isLeftHand = !has_usb(); - #else - isLeftHand = has_usb(); - #endif - #endif -} - -static void keyboard_master_setup(void) { -#ifdef USE_I2C - i2c_master_init(); -#ifdef SSD1306OLED - matrix_master_OLED_init(); -#endif -#else - serial_master_init(); -#endif -} - -static void keyboard_slave_setup(void) { - timer_init(); -#ifdef USE_I2C - i2c_slave_init(SLAVE_I2C_ADDRESS); -#else - serial_slave_init(); -#endif -} - -bool has_usb(void) { - USBCON |= (1 << OTGPADE); //enables VBUS pad - _delay_us(5); - return (USBSTA & (1< -#include "eeconfig.h" - -#define SLAVE_I2C_ADDRESS 0x32 - -extern volatile bool isLeftHand; - -// slave version of matix scan, defined in matrix.c -void matrix_slave_scan(void); - -void split_keyboard_setup(void); -bool has_usb(void); -void keyboard_slave_loop(void); - -void matrix_master_OLED_init (void); - -#endif From bc536b9b6d98e5428a28f6e6ba69675bd77b79cc Mon Sep 17 00:00:00 2001 From: Bob Date: Mon, 8 Apr 2019 17:07:15 -0400 Subject: [PATCH 063/171] Switch process_combo to using global register and timer (#2561) Since combos keep local state about what keys have been previously pressed, when combos are layered, multiple keypresses will register for any key with multiple combos assigned to it. In order to fix this, I switched process_combo to use a global keycode / keyrecord register and timer. When a keypress is consumed by a combo, it gets stored in the register and the timer is updated; when the next keypress takes too long or a key is pressed that isn't part of any combo, the buffer is emitted and the timer reset. This has a few side effects. For instance, I couldn't _not_ fix combo keys printing out of order while also fixing this bug, so combo keys print in order correctly when a combo fails. since combos no longer have local timers, the logic around when combos time out has changed. now that there is a single timer pressing any combo key (including one in a different combo) will reset the timer for all combos, making combo entry a little more lenient. Since combos no longer have local keycode / keyrecord state, there is an edge case where incomplete combo keys can be consumed. if you have a combo for a+s = tab and a combo for b+n = space, if you press a+b+n, only a space will be emitted. This is because when b+n completes successfully, it drops the register. --- quantum/process_keycode/process_combo.c | 245 +++++++++++++----------- quantum/process_keycode/process_combo.h | 33 ++-- 2 files changed, 151 insertions(+), 127 deletions(-) diff --git a/quantum/process_keycode/process_combo.c b/quantum/process_keycode/process_combo.c index 13f8bbb3312..a157ed48be1 100644 --- a/quantum/process_keycode/process_combo.c +++ b/quantum/process_keycode/process_combo.c @@ -14,141 +14,164 @@ * along with this program. If not, see . */ -#include "process_combo.h" #include "print.h" +#include "process_combo.h" - -__attribute__ ((weak)) -combo_t key_combos[COMBO_COUNT] = { +__attribute__((weak)) combo_t key_combos[COMBO_COUNT] = { }; -__attribute__ ((weak)) -void process_combo_event(uint8_t combo_index, bool pressed) { - -} +__attribute__((weak)) void process_combo_event(uint8_t combo_index, + bool pressed) {} +static uint16_t timer = 0; static uint8_t current_combo_index = 0; +static bool drop_buffer = false; +static bool is_active = false; -static inline void send_combo(uint16_t action, bool pressed) -{ - if (action) { - if (pressed) { - register_code16(action); - } else { - unregister_code16(action); - } +static uint8_t buffer_size = 0; +#ifdef COMBO_ALLOW_ACTION_KEYS +static keyrecord_t key_buffer[MAX_COMBO_LENGTH]; +#else +static uint16_t key_buffer[MAX_COMBO_LENGTH]; +#endif + +static inline void send_combo(uint16_t action, bool pressed) { + if (action) { + if (pressed) { + register_code16(action); } else { - process_combo_event(current_combo_index, pressed); + unregister_code16(action); } + } else { + process_combo_event(current_combo_index, pressed); + } } -#define ALL_COMBO_KEYS_ARE_DOWN (((1<state) -#define NO_COMBO_KEYS_ARE_DOWN (0 == combo->state) -#define KEY_STATE_DOWN(key) do{ combo->state |= (1<state &= ~(1<keys; ;++count) { - uint16_t key = pgm_read_word(&keys[count]); - if (keycode == key) index = count; - if (COMBO_END == key) break; - } +static inline void dump_key_buffer(bool emit) { + if (buffer_size == 0) { + return; + } - /* Return if not a combo key */ - if (-1 == (int8_t)index) return false; - - /* The combos timer is used to signal whether the combo is active */ - bool is_combo_active = combo->is_active; - - if (record->event.pressed) { - KEY_STATE_DOWN(index); - - if (is_combo_active) { - if (ALL_COMBO_KEYS_ARE_DOWN) { /* Combo was pressed */ - send_combo(combo->keycode, true); - combo->is_active = false; - } else { /* Combo key was pressed */ - combo->timer = timer_read(); - combo->is_active = true; + if (emit) { + for (uint8_t i = 0; i < buffer_size; i++) { #ifdef COMBO_ALLOW_ACTION_KEYS - combo->prev_record = *record; + const action_t action = store_or_get_action(key_buffer[i].event.pressed, + key_buffer[i].event.key); + process_action(&(key_buffer[i]), action); #else - combo->prev_key = keycode; + register_code16(key_buffer[i]); + send_keyboard_report(); #endif - } - } + } + } + + buffer_size = 0; +} + +#define ALL_COMBO_KEYS_ARE_DOWN (((1 << count) - 1) == combo->state) +#define KEY_STATE_DOWN(key) \ + do { \ + combo->state |= (1 << key); \ + } while (0) +#define KEY_STATE_UP(key) \ + do { \ + combo->state &= ~(1 << key); \ + } while (0) + +static bool process_single_combo(combo_t *combo, uint16_t keycode, + keyrecord_t *record) { + uint8_t count = 0; + uint8_t index = -1; + /* Find index of keycode and number of combo keys */ + for (const uint16_t *keys = combo->keys;; ++count) { + uint16_t key = pgm_read_word(&keys[count]); + if (keycode == key) + index = count; + if (COMBO_END == key) + break; + } + + /* Continue processing if not a combo key */ + if (-1 == (int8_t)index) + return false; + + bool is_combo_active = is_active; + + if (record->event.pressed) { + KEY_STATE_DOWN(index); + + if (is_combo_active) { + if (ALL_COMBO_KEYS_ARE_DOWN) { /* Combo was pressed */ + send_combo(combo->keycode, true); + drop_buffer = true; + } + } + } else { + if (ALL_COMBO_KEYS_ARE_DOWN) { /* Combo was released */ + send_combo(combo->keycode, false); } else { - if (ALL_COMBO_KEYS_ARE_DOWN) { /* Combo was released */ - send_combo(combo->keycode, false); - } + /* continue processing without immediately returning */ + is_combo_active = false; + } - if (is_combo_active) { /* Combo key was tapped */ + KEY_STATE_UP(index); + } + + return is_combo_active; +} + +#define NO_COMBO_KEYS_ARE_DOWN (0 == combo->state) + +bool process_combo(uint16_t keycode, keyrecord_t *record) { + bool is_combo_key = false; + drop_buffer = false; + bool no_combo_keys_pressed = false; + + for (current_combo_index = 0; current_combo_index < COMBO_COUNT; + ++current_combo_index) { + combo_t *combo = &key_combos[current_combo_index]; + is_combo_key |= process_single_combo(combo, keycode, record); + no_combo_keys_pressed |= NO_COMBO_KEYS_ARE_DOWN; + } + + if (drop_buffer) { + /* buffer is only dropped when we complete a combo, so we refresh the timer + * here */ + timer = timer_read(); + dump_key_buffer(false); + } else if (!is_combo_key) { + /* if no combos claim the key we need to emit the keybuffer */ + dump_key_buffer(true); + + // reset state if there are no combo keys pressed at all + if (no_combo_keys_pressed) { + timer = 0; + is_active = true; + } + } else if (record->event.pressed && is_active) { + /* otherwise the key is consumed and placed in the buffer */ + timer = timer_read(); + + if (buffer_size < MAX_COMBO_LENGTH) { #ifdef COMBO_ALLOW_ACTION_KEYS - record->event.pressed = true; - process_action(record, store_or_get_action(record->event.pressed, record->event.key)); - record->event.pressed = false; - process_action(record, store_or_get_action(record->event.pressed, record->event.key)); + key_buffer[buffer_size++] = *record; #else - register_code16(keycode); - send_keyboard_report(); - unregister_code16(keycode); + key_buffer[buffer_size++] = keycode; #endif - combo->is_active = false; - combo->timer = 0; - } - - KEY_STATE_UP(index); } + } - if (NO_COMBO_KEYS_ARE_DOWN) { - combo->is_active = true; - combo->timer = 0; - } - - return is_combo_active; + return !is_combo_key; } -bool process_combo(uint16_t keycode, keyrecord_t *record) -{ - bool is_combo_key = false; +void matrix_scan_combo(void) { + if (is_active && timer && timer_elapsed(timer) > COMBO_TERM) { - for (current_combo_index = 0; current_combo_index < COMBO_COUNT; ++current_combo_index) { - combo_t *combo = &key_combos[current_combo_index]; - is_combo_key |= process_single_combo(combo, keycode, record); - } - - return !is_combo_key; -} - -void matrix_scan_combo(void) -{ - for (int i = 0; i < COMBO_COUNT; ++i) { - // Do not treat the (weak) key_combos too strict. - #pragma GCC diagnostic push - #pragma GCC diagnostic ignored "-Warray-bounds" - combo_t *combo = &key_combos[i]; - #pragma GCC diagnostic pop - if (combo->is_active && - combo->timer && - timer_elapsed(combo->timer) > COMBO_TERM) { - - /* This disables the combo, meaning key events for this - * combo will be handled by the next processors in the chain - */ - combo->is_active = false; - -#ifdef COMBO_ALLOW_ACTION_KEYS - process_action(&combo->prev_record, - store_or_get_action(combo->prev_record.event.pressed, - combo->prev_record.event.key)); -#else - unregister_code16(combo->prev_key); - register_code16(combo->prev_key); -#endif - } - } + /* This disables the combo, meaning key events for this + * combo will be handled by the next processors in the chain + */ + is_active = false; + dump_key_buffer(true); + } } diff --git a/quantum/process_keycode/process_combo.h b/quantum/process_keycode/process_combo.h index a5787c9ed36..f06d2d3454f 100644 --- a/quantum/process_keycode/process_combo.h +++ b/quantum/process_keycode/process_combo.h @@ -17,33 +17,34 @@ #ifndef PROCESS_COMBO_H #define PROCESS_COMBO_H -#include #include "progmem.h" #include "quantum.h" +#include -typedef struct -{ - const uint16_t *keys; - uint16_t keycode; #ifdef EXTRA_EXTRA_LONG_COMBOS - uint32_t state; +#define MAX_COMBO_LENGTH 32 #elif EXTRA_LONG_COMBOS - uint16_t state; +#define MAX_COMBO_LENGTH 16 #else - uint8_t state; +#define MAX_COMBO_LENGTH 8 #endif - uint16_t timer; - bool is_active; -#ifdef COMBO_ALLOW_ACTION_KEYS - keyrecord_t prev_record; + +typedef struct { + const uint16_t *keys; + uint16_t keycode; +#ifdef EXTRA_EXTRA_LONG_COMBOS + uint32_t state; +#elif EXTRA_LONG_COMBOS + uint16_t state; #else - uint16_t prev_key; + uint8_t state; #endif } combo_t; - -#define COMBO(ck, ca) {.keys = &(ck)[0], .keycode = (ca)} -#define COMBO_ACTION(ck) {.keys = &(ck)[0]} +#define COMBO(ck, ca) \ + { .keys = &(ck)[0], .keycode = (ca) } +#define COMBO_ACTION(ck) \ + { .keys = &(ck)[0] } #define COMBO_END 0 #ifndef COMBO_COUNT From fa4052c26e33b42b65521fd5ba9f94a3a778b275 Mon Sep 17 00:00:00 2001 From: Jack Humbert Date: Mon, 8 Apr 2019 19:57:43 -0400 Subject: [PATCH 064/171] Adds the Planck EZ, 3737 RGB, fixes out-of-tune notes (#5532) * RGB Matrix overhaul Breakout of animations to separate files Integration of optimized int based math lib Overhaul of rgb_matrix.c and animations for performance * Updating effect function api for future extensions * Combined the keypresses || keyreleases define checks into a single define so I stop forgetting it where necessary * Moving define RGB_MATRIX_KEYREACTIVE_ENABLED earlier in the include chain * Adds the Planck EZ, 3737 RGB, fixes out-of-tune notes * fix bug in quantum/rgb_matrix_drivers.c Co-Authored-By: jackhumbert * update command setting to the correct default * correct rgb config * remove commented-out lines * update docs for the 3737 * Update docs/feature_rgb_matrix.md Co-Authored-By: jackhumbert --- common_features.mk | 14 +- docs/feature_rgb_matrix.md | 4 +- drivers/issi/is31fl3737.c | 252 +++++++++++++++++++++++++++++++++++ drivers/issi/is31fl3737.h | 207 ++++++++++++++++++++++++++++ keyboards/planck/ez/config.h | 141 ++++++++++++++++++++ keyboards/planck/ez/ez.c | 175 ++++++++++++++++++++++++ keyboards/planck/ez/ez.h | 107 +++++++++++++++ keyboards/planck/ez/rules.mk | 24 ++++ keyboards/planck/planck.h | 6 +- quantum/audio/audio_arm.c | 6 +- quantum/rgb_matrix.h | 4 +- quantum/rgb_matrix_drivers.c | 28 +++- quantum/stm32/halconf.h | 2 +- quantum/stm32/mcuconf.h | 2 +- 14 files changed, 956 insertions(+), 16 deletions(-) create mode 100644 drivers/issi/is31fl3737.c create mode 100644 drivers/issi/is31fl3737.h create mode 100644 keyboards/planck/ez/config.h create mode 100644 keyboards/planck/ez/ez.c create mode 100644 keyboards/planck/ez/ez.h create mode 100644 keyboards/planck/ez/rules.mk diff --git a/common_features.mk b/common_features.mk index 046f94d1dbe..c3b6fa91684 100644 --- a/common_features.mk +++ b/common_features.mk @@ -114,7 +114,7 @@ ifeq ($(strip $(RGBLIGHT_ENABLE)), yes) endif endif -VALID_MATRIX_TYPES := yes IS31FL3731 IS31FL3733 custom +VALID_MATRIX_TYPES := yes IS31FL3731 IS31FL3733 IS31FL3737 custom LED_MATRIX_ENABLE ?= no ifneq ($(strip $(LED_MATRIX_ENABLE)), no) @@ -135,6 +135,7 @@ ifeq ($(strip $(LED_MATRIX_ENABLE)), IS31FL3731) endif RGB_MATRIX_ENABLE ?= no + ifneq ($(strip $(RGB_MATRIX_ENABLE)), no) ifeq ($(filter $(RGB_MATRIX_ENABLE),$(VALID_MATRIX_TYPES)),) $(error RGB_MATRIX_ENABLE="$(RGB_MATRIX_ENABLE)" is not a valid matrix type) @@ -151,19 +152,26 @@ ifeq ($(strip $(RGB_MATRIX_ENABLE)), yes) endif ifeq ($(strip $(RGB_MATRIX_ENABLE)), IS31FL3731) - OPT_DEFS += -DIS31FL3731 + OPT_DEFS += -DIS31FL3731 -DSTM32_I2C -DHAL_USE_I2C=TRUE COMMON_VPATH += $(DRIVER_PATH)/issi SRC += is31fl3731.c SRC += i2c_master.c endif ifeq ($(strip $(RGB_MATRIX_ENABLE)), IS31FL3733) - OPT_DEFS += -DIS31FL3733 + OPT_DEFS += -DIS31FL3733 -DSTM32_I2C -DHAL_USE_I2C=TRUE COMMON_VPATH += $(DRIVER_PATH)/issi SRC += is31fl3733.c SRC += i2c_master.c endif +ifeq ($(strip $(RGB_MATRIX_ENABLE)), IS31FL3737) + OPT_DEFS += -DIS31FL3737 -DSTM32_I2C -DHAL_USE_I2C=TRUE + COMMON_VPATH += $(DRIVER_PATH)/issi + SRC += is31fl3737.c + SRC += i2c_master.c +endif + ifeq ($(strip $(TAP_DANCE_ENABLE)), yes) OPT_DEFS += -DTAP_DANCE_ENABLE SRC += $(QUANTUM_DIR)/process_keycode/process_tap_dance.c diff --git a/docs/feature_rgb_matrix.md b/docs/feature_rgb_matrix.md index ec121895459..36d9d011362 100644 --- a/docs/feature_rgb_matrix.md +++ b/docs/feature_rgb_matrix.md @@ -52,7 +52,9 @@ const is31_led g_is31_leds[DRIVER_LED_TOTAL] = { Where `Cx_y` is the location of the LED in the matrix defined by [the datasheet](http://www.issi.com/WW/pdf/31FL3731.pdf) and the header file `drivers/issi/is31fl3731.h`. The `driver` is the index of the driver you defined in your `config.h` (`0` or `1` right now). -### IS31FL3733 +### IS31FL3733/IS31FL3737 + +!> For the IS31FL3737, replace all instances of `IS31FL3733` below with `IS31FL3737`. There is basic support for addressable RGB matrix lighting with the I2C IS31FL3733 RGB controller. To enable it, add this to your `rules.mk`: diff --git a/drivers/issi/is31fl3737.c b/drivers/issi/is31fl3737.c new file mode 100644 index 00000000000..6491049274b --- /dev/null +++ b/drivers/issi/is31fl3737.c @@ -0,0 +1,252 @@ +/* Copyright 2017 Jason Williams + * Copyright 2018 Jack Humbert + * Copyright 2018 Yiancar + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#ifdef __AVR__ +#include +#include +#include +#else +#include "wait.h" +#endif + +#include +#include "i2c_master.h" +#include "progmem.h" +#include "rgb_matrix.h" + +// This is a 7-bit address, that gets left-shifted and bit 0 +// set to 0 for write, 1 for read (as per I2C protocol) +// The address will vary depending on your wiring: +// 00 <-> GND +// 01 <-> SCL +// 10 <-> SDA +// 11 <-> VCC +// ADDR1 represents A1:A0 of the 7-bit address. +// ADDR2 represents A3:A2 of the 7-bit address. +// The result is: 0b101(ADDR2)(ADDR1) +#define ISSI_ADDR_DEFAULT 0x50 + +#define ISSI_COMMANDREGISTER 0xFD +#define ISSI_COMMANDREGISTER_WRITELOCK 0xFE +#define ISSI_INTERRUPTMASKREGISTER 0xF0 +#define ISSI_INTERRUPTSTATUSREGISTER 0xF1 + +#define ISSI_PAGE_LEDCONTROL 0x00 //PG0 +#define ISSI_PAGE_PWM 0x01 //PG1 +#define ISSI_PAGE_AUTOBREATH 0x02 //PG2 +#define ISSI_PAGE_FUNCTION 0x03 //PG3 + +#define ISSI_REG_CONFIGURATION 0x00 //PG3 +#define ISSI_REG_GLOBALCURRENT 0x01 //PG3 +#define ISSI_REG_RESET 0x11// PG3 +#define ISSI_REG_SWPULLUP 0x0F //PG3 +#define ISSI_REG_CSPULLUP 0x10 //PG3 + +#ifndef ISSI_TIMEOUT + #define ISSI_TIMEOUT 100 +#endif + +#ifndef ISSI_PERSISTENCE + #define ISSI_PERSISTENCE 0 +#endif + +// Transfer buffer for TWITransmitData() +uint8_t g_twi_transfer_buffer[20]; + +// These buffers match the IS31FL3737 PWM registers. +// The control buffers match the PG0 LED On/Off registers. +// Storing them like this is optimal for I2C transfers to the registers. +// We could optimize this and take out the unused registers from these +// buffers and the transfers in IS31FL3737_write_pwm_buffer() but it's +// probably not worth the extra complexity. +uint8_t g_pwm_buffer[DRIVER_COUNT][192]; +bool g_pwm_buffer_update_required = false; + +uint8_t g_led_control_registers[DRIVER_COUNT][24] = { { 0 } }; +bool g_led_control_registers_update_required = false; + +void IS31FL3737_write_register( uint8_t addr, uint8_t reg, uint8_t data ) +{ + g_twi_transfer_buffer[0] = reg; + g_twi_transfer_buffer[1] = data; + + #if ISSI_PERSISTENCE > 0 + for (uint8_t i = 0; i < ISSI_PERSISTENCE; i++) { + if (i2c_transmit(addr << 1, g_twi_transfer_buffer, 2, ISSI_TIMEOUT) == 0) + break; + } + #else + i2c_transmit(addr << 1, g_twi_transfer_buffer, 2, ISSI_TIMEOUT); + #endif +} + +void IS31FL3737_write_pwm_buffer( uint8_t addr, uint8_t *pwm_buffer ) +{ + // assumes PG1 is already selected + + // transmit PWM registers in 12 transfers of 16 bytes + // g_twi_transfer_buffer[] is 20 bytes + + // iterate over the pwm_buffer contents at 16 byte intervals + for ( int i = 0; i < 192; i += 16 ) { + g_twi_transfer_buffer[0] = i; + // copy the data from i to i+15 + // device will auto-increment register for data after the first byte + // thus this sets registers 0x00-0x0F, 0x10-0x1F, etc. in one transfer + for ( int j = 0; j < 16; j++ ) { + g_twi_transfer_buffer[1 + j] = pwm_buffer[i + j]; + } + + #if ISSI_PERSISTENCE > 0 + for (uint8_t i = 0; i < ISSI_PERSISTENCE; i++) { + if (i2c_transmit(addr << 1, g_twi_transfer_buffer, 17, ISSI_TIMEOUT) == 0) + break; + } + #else + i2c_transmit(addr << 1, g_twi_transfer_buffer, 17, ISSI_TIMEOUT); + #endif + } +} + +void IS31FL3737_init( uint8_t addr ) +{ + // In order to avoid the LEDs being driven with garbage data + // in the LED driver's PWM registers, shutdown is enabled last. + // Set up the mode and other settings, clear the PWM registers, + // then disable software shutdown. + + // Unlock the command register. + IS31FL3737_write_register( addr, ISSI_COMMANDREGISTER_WRITELOCK, 0xC5 ); + + // Select PG0 + IS31FL3737_write_register( addr, ISSI_COMMANDREGISTER, ISSI_PAGE_LEDCONTROL ); + // Turn off all LEDs. + for ( int i = 0x00; i <= 0x17; i++ ) + { + IS31FL3737_write_register( addr, i, 0x00 ); + } + + // Unlock the command register. + IS31FL3737_write_register( addr, ISSI_COMMANDREGISTER_WRITELOCK, 0xC5 ); + + // Select PG1 + IS31FL3737_write_register( addr, ISSI_COMMANDREGISTER, ISSI_PAGE_PWM ); + // Set PWM on all LEDs to 0 + // No need to setup Breath registers to PWM as that is the default. + for ( int i = 0x00; i <= 0xBF; i++ ) + { + IS31FL3737_write_register( addr, i, 0x00 ); + } + + // Unlock the command register. + IS31FL3737_write_register( addr, ISSI_COMMANDREGISTER_WRITELOCK, 0xC5 ); + + // Select PG3 + IS31FL3737_write_register( addr, ISSI_COMMANDREGISTER, ISSI_PAGE_FUNCTION ); + // Set global current to maximum. + IS31FL3737_write_register( addr, ISSI_REG_GLOBALCURRENT, 0xFF ); + // Disable software shutdown. + IS31FL3737_write_register( addr, ISSI_REG_CONFIGURATION, 0x01 ); + + // Wait 10ms to ensure the device has woken up. + #ifdef __AVR__ + _delay_ms( 10 ); + #else + wait_ms(10); + #endif +} + +void IS31FL3737_set_color( int index, uint8_t red, uint8_t green, uint8_t blue ) +{ + if ( index >= 0 && index < DRIVER_LED_TOTAL ) { + is31_led led = g_is31_leds[index]; + + g_pwm_buffer[led.driver][led.r] = red; + g_pwm_buffer[led.driver][led.g] = green; + g_pwm_buffer[led.driver][led.b] = blue; + g_pwm_buffer_update_required = true; + } +} + +void IS31FL3737_set_color_all( uint8_t red, uint8_t green, uint8_t blue ) +{ + for ( int i = 0; i < DRIVER_LED_TOTAL; i++ ) + { + IS31FL3737_set_color( i, red, green, blue ); + } +} + +void IS31FL3737_set_led_control_register( uint8_t index, bool red, bool green, bool blue ) +{ + is31_led led = g_is31_leds[index]; + + uint8_t control_register_r = led.r / 8; + uint8_t control_register_g = led.g / 8; + uint8_t control_register_b = led.b / 8; + uint8_t bit_r = led.r % 8; + uint8_t bit_g = led.g % 8; + uint8_t bit_b = led.b % 8; + + if ( red ) { + g_led_control_registers[led.driver][control_register_r] |= (1 << bit_r); + } else { + g_led_control_registers[led.driver][control_register_r] &= ~(1 << bit_r); + } + if ( green ) { + g_led_control_registers[led.driver][control_register_g] |= (1 << bit_g); + } else { + g_led_control_registers[led.driver][control_register_g] &= ~(1 << bit_g); + } + if ( blue ) { + g_led_control_registers[led.driver][control_register_b] |= (1 << bit_b); + } else { + g_led_control_registers[led.driver][control_register_b] &= ~(1 << bit_b); + } + + g_led_control_registers_update_required = true; + +} + +void IS31FL3737_update_pwm_buffers( uint8_t addr1, uint8_t addr2 ) +{ + if ( g_pwm_buffer_update_required ) + { + // Firstly we need to unlock the command register and select PG1 + IS31FL3737_write_register( addr1, ISSI_COMMANDREGISTER_WRITELOCK, 0xC5 ); + IS31FL3737_write_register( addr1, ISSI_COMMANDREGISTER, ISSI_PAGE_PWM ); + + IS31FL3737_write_pwm_buffer( addr1, g_pwm_buffer[0] ); + //IS31FL3737_write_pwm_buffer( addr2, g_pwm_buffer[1] ); + } + g_pwm_buffer_update_required = false; +} + +void IS31FL3737_update_led_control_registers( uint8_t addr1, uint8_t addr2 ) +{ + if ( g_led_control_registers_update_required ) + { + // Firstly we need to unlock the command register and select PG0 + IS31FL3737_write_register( addr1, ISSI_COMMANDREGISTER_WRITELOCK, 0xC5 ); + IS31FL3737_write_register( addr1, ISSI_COMMANDREGISTER, ISSI_PAGE_LEDCONTROL ); + for ( int i=0; i<24; i++ ) + { + IS31FL3737_write_register(addr1, i, g_led_control_registers[0][i] ); + //IS31FL3737_write_register(addr2, i, g_led_control_registers[1][i] ); + } + } +} diff --git a/drivers/issi/is31fl3737.h b/drivers/issi/is31fl3737.h new file mode 100644 index 00000000000..69c4b9b538f --- /dev/null +++ b/drivers/issi/is31fl3737.h @@ -0,0 +1,207 @@ +/* Copyright 2017 Jason Williams + * Copyright 2018 Jack Humbert + * Copyright 2018 Yiancar + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + + +#ifndef IS31FL3737_DRIVER_H +#define IS31FL3737_DRIVER_H + +#include +#include + +typedef struct is31_led { + uint8_t driver:2; + uint8_t r; + uint8_t g; + uint8_t b; +} __attribute__((packed)) is31_led; + +extern const is31_led g_is31_leds[DRIVER_LED_TOTAL]; + +void IS31FL3737_init( uint8_t addr ); +void IS31FL3737_write_register( uint8_t addr, uint8_t reg, uint8_t data ); +void IS31FL3737_write_pwm_buffer( uint8_t addr, uint8_t *pwm_buffer ); + +void IS31FL3737_set_color( int index, uint8_t red, uint8_t green, uint8_t blue ); +void IS31FL3737_set_color_all( uint8_t red, uint8_t green, uint8_t blue ); + +void IS31FL3737_set_led_control_register( uint8_t index, bool red, bool green, bool blue ); + +// This should not be called from an interrupt +// (eg. from a timer interrupt). +// Call this while idle (in between matrix scans). +// If the buffer is dirty, it will update the driver with the buffer. +void IS31FL3737_update_pwm_buffers( uint8_t addr1, uint8_t addr2 ); +void IS31FL3737_update_led_control_registers( uint8_t addr1, uint8_t addr2 ); + +#define A_1 0x00 +#define A_2 0x01 +#define A_3 0x02 +#define A_4 0x03 +#define A_5 0x04 +#define A_6 0x05 +#define A_7 0x08 +#define A_8 0x09 +#define A_9 0x0A +#define A_10 0x0B +#define A_11 0x0C +#define A_12 0x0D + +#define B_1 0x10 +#define B_2 0x11 +#define B_3 0x12 +#define B_4 0x13 +#define B_5 0x14 +#define B_6 0x15 +#define B_7 0x18 +#define B_8 0x19 +#define B_9 0x1A +#define B_10 0x1B +#define B_11 0x1C +#define B_12 0x1D + +#define C_1 0x20 +#define C_2 0x21 +#define C_3 0x22 +#define C_4 0x23 +#define C_5 0x24 +#define C_6 0x25 +#define C_7 0x28 +#define C_8 0x29 +#define C_9 0x2A +#define C_10 0x2B +#define C_11 0x2C +#define C_12 0x2D + +#define D_1 0x30 +#define D_2 0x31 +#define D_3 0x32 +#define D_4 0x33 +#define D_5 0x34 +#define D_6 0x35 +#define D_7 0x38 +#define D_8 0x39 +#define D_9 0x3A +#define D_10 0x3B +#define D_11 0x3C +#define D_12 0x3D + +#define E_1 0x40 +#define E_2 0x41 +#define E_3 0x42 +#define E_4 0x43 +#define E_5 0x44 +#define E_6 0x45 +#define E_7 0x48 +#define E_8 0x49 +#define E_9 0x4A +#define E_10 0x4B +#define E_11 0x4C +#define E_12 0x4D + +#define F_1 0x50 +#define F_2 0x51 +#define F_3 0x52 +#define F_4 0x53 +#define F_5 0x54 +#define F_6 0x55 +#define F_7 0x58 +#define F_8 0x59 +#define F_9 0x5A +#define F_10 0x5B +#define F_11 0x5C +#define F_12 0x5D + +#define G_1 0x60 +#define G_2 0x61 +#define G_3 0x62 +#define G_4 0x63 +#define G_5 0x64 +#define G_6 0x65 +#define G_7 0x68 +#define G_8 0x69 +#define G_9 0x6A +#define G_10 0x6B +#define G_11 0x6C +#define G_12 0x6D + +#define H_1 0x70 +#define H_2 0x71 +#define H_3 0x72 +#define H_4 0x73 +#define H_5 0x74 +#define H_6 0x75 +#define H_7 0x78 +#define H_8 0x79 +#define H_9 0x7A +#define H_10 0x7B +#define H_11 0x7C +#define H_12 0x7D + +#define I_1 0x80 +#define I_2 0x81 +#define I_3 0x82 +#define I_4 0x83 +#define I_5 0x84 +#define I_6 0x85 +#define I_7 0x88 +#define I_8 0x89 +#define I_9 0x8A +#define I_10 0x8B +#define I_11 0x8C +#define I_12 0x8D + +#define J_1 0x90 +#define J_2 0x91 +#define J_3 0x92 +#define J_4 0x93 +#define J_5 0x94 +#define J_6 0x95 +#define J_7 0x98 +#define J_8 0x99 +#define J_9 0x9A +#define J_10 0x9B +#define J_11 0x9C +#define J_12 0x9D + +#define K_1 0xA0 +#define K_2 0xA1 +#define K_3 0xA2 +#define K_4 0xA3 +#define K_5 0xA4 +#define K_6 0xA5 +#define K_7 0xA8 +#define K_8 0xA9 +#define K_9 0xAA +#define K_10 0xAB +#define K_11 0xAC +#define K_12 0xAD + +#define L_1 0xB0 +#define L_2 0xB1 +#define L_3 0xB2 +#define L_4 0xB3 +#define L_5 0xB4 +#define L_6 0xB5 +#define L_7 0xB8 +#define L_8 0xB9 +#define L_9 0xBA +#define L_10 0xBB +#define L_11 0xBC +#define L_12 0xBD + +#endif // IS31FL3737_DRIVER_H diff --git a/keyboards/planck/ez/config.h b/keyboards/planck/ez/config.h new file mode 100644 index 00000000000..c449d171926 --- /dev/null +++ b/keyboards/planck/ez/config.h @@ -0,0 +1,141 @@ +/* + * Copyright 2018 Jack Humbert + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#pragma once + +/* USB Device descriptor parameter */ +#define DEVICE_VER 0x0000 + +#undef MATRIX_ROWS +#undef MATRIX_COLS +/* key matrix size */ +#define MATRIX_ROWS 8 +#define MATRIX_COLS 6 + +/* + * Keyboard Matrix Assignments + * + * Change this to how you wired your keyboard + * COLS: AVR pins used for columns, left to right + * ROWS: AVR pins used for rows, top to bottom + * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) + * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) + * +*/ + +#undef MATRIX_ROW_PINS +#undef MATRIX_COL_PINS + +#define MATRIX_ROW_PINS { A10, A9, A8, B15, C13, C14, C15, A2 } +#define MATRIX_COL_PINS { B11, B10, B2, B1, A7, B0 } + +#define NUMBER_OF_ENCODERS 1 +#define ENCODERS_PAD_A { B12 } +#define ENCODERS_PAD_B { B13 } + +#define MUSIC_MAP +#undef AUDIO_VOICES +#undef C6_AUDIO + +/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ +#define DEBOUNCE 6 + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +//#define LOCKING_SUPPORT_ENABLE +/* Locking resynchronize hack */ +//#define LOCKING_RESYNC_ENABLE + +/* + * Force NKRO + * + * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved + * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the + * makefile for this to work.) + * + * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) + * until the next keyboard reset. + * + * NKRO may prevent your keystrokes from being detected in the BIOS, but it is + * fully operational during normal computer usage. + * + * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) + * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by + * bootmagic, NKRO mode will always be enabled until it is toggled again during a + * power-up. + * + */ +//#define FORCE_NKRO + +/* + * Feature disable options + * These options are also useful to firmware size reduction. + */ + +/* disable debug print */ +//#define NO_DEBUG + +/* disable print */ +//#define NO_PRINT + +/* disable action features */ +//#define NO_ACTION_LAYER +//#define NO_ACTION_TAPPING +//#define NO_ACTION_ONESHOT +//#define NO_ACTION_MACRO +//#define NO_ACTION_FUNCTION + +/* + * MIDI options + */ + +/* Prevent use of disabled MIDI features in the keymap */ +//#define MIDI_ENABLE_STRICT 1 + +/* enable basic MIDI features: + - MIDI notes can be sent when in Music mode is on +*/ +//#define MIDI_BASIC + +/* enable advanced MIDI features: + - MIDI notes can be added to the keymap + - Octave shift and transpose + - Virtual sustain, portamento, and modulation wheel + - etc. +*/ +//#define MIDI_ADVANCED + +/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */ +//#define MIDI_TONE_KEYCODE_OCTAVES 1 + +// #define WS2812_LED_N 2 +// #define RGBLED_NUM WS2812_LED_N +// #define WS2812_TIM_N 2 +// #define WS2812_TIM_CH 2 +// #define PORT_WS2812 GPIOA +// #define PIN_WS2812 1 +// #define WS2812_DMA_STREAM STM32_DMA1_STREAM2 // DMA stream for TIMx_UP (look up in reference manual under DMA Channel selection) +//#define WS2812_DMA_CHANNEL 7 // DMA channel for TIMx_UP +//#define WS2812_EXTERNAL_PULLUP + +#define DRIVER_ADDR_1 0b1010000 +#define DRIVER_ADDR_2 0b1010000 // this is here for compliancy reasons. + +#define DRIVER_COUNT 1 +#define DRIVER_1_LED_TOTAL 47 +#define DRIVER_LED_TOTAL DRIVER_1_LED_TOTAL + +#define RGB_MATRIX_KEYPRESSES diff --git a/keyboards/planck/ez/ez.c b/keyboards/planck/ez/ez.c new file mode 100644 index 00000000000..b859af6c15b --- /dev/null +++ b/keyboards/planck/ez/ez.c @@ -0,0 +1,175 @@ +/* Copyright 2018 Jack Humbert + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ +#include "ez.h" + +const is31_led g_is31_leds[DRIVER_LED_TOTAL] = { +/* Refer to IS31 manual for these locations + * driver + * | R location + * | | G location + * | | | B location + * | | | | */ + {0, A_12, B_12, C_12}, + {0, A_11, B_11, C_11}, + {0, A_10, B_10, C_10}, + {0, A_9, B_9, C_9}, + {0, A_8, B_8, C_8}, + {0, A_7, B_7, C_7}, + + {0, G_12, H_12, I_12}, + {0, G_11, H_11, I_11}, + {0, G_10, H_10, I_10}, + {0, G_9, H_9, I_9}, + {0, G_8, H_8, I_8}, + {0, G_7, H_7, I_7}, + + {0, A_6, B_6, C_6}, + {0, A_5, B_5, C_5}, + {0, A_4, B_4, C_4}, + {0, A_3, B_3, C_3}, + {0, A_2, B_2, C_2}, + {0, A_1, B_1, C_1}, + + {0, G_6, H_6, I_6}, + {0, G_5, H_5, I_5}, + {0, G_4, H_4, I_4}, + {0, G_3, H_3, I_3}, + {0, G_2, H_2, I_2}, + {0, G_1, H_1, I_1}, + + {0, D_12, E_12, F_12}, + {0, D_11, E_11, F_11}, + {0, D_10, E_10, F_10}, + {0, D_9, E_9, F_9}, + {0, D_8, E_8, F_8}, + {0, D_7, E_7, F_7}, + + {0, J_12, K_12, L_12}, + {0, J_11, K_11, L_11}, + {0, J_10, K_10, L_10}, + {0, J_9, K_9, L_9}, + {0, J_8, K_8, L_8}, + {0, J_7, K_7, L_7}, + + {0, D_6, E_6, F_6}, + {0, D_5, E_5, F_5}, + {0, D_4, E_4, F_4}, + {0, D_3, E_3, F_3}, + {0, D_2, E_2, F_2}, + {0, D_1, E_1, F_1}, + + {0, J_6, K_6, L_6}, + {0, J_5, K_5, L_5}, + {0, J_4, K_4, L_4}, + {0, J_3, K_3, L_3}, + {0, J_2, K_2, L_2}, + +}; + +const rgb_led g_rgb_leds[DRIVER_LED_TOTAL] = { + + /*{row | col << 4} + | {x=0..224, y=0..64} + | | modifier + | | | */ + {{0|(0<<4)}, {20.36*0, 21.33*0}, 1}, + {{0|(1<<4)}, {20.36*1, 21.33*0}, 0}, + {{0|(2<<4)}, {20.36*2, 21.33*0}, 0}, + {{0|(3<<4)}, {20.36*3, 21.33*0}, 0}, + {{0|(4<<4)}, {20.36*4, 21.33*0}, 0}, + {{0|(5<<4)}, {20.36*5, 21.33*0}, 0}, + {{4|(0<<4)}, {20.36*6, 21.33*0}, 0}, + {{4|(1<<4)}, {20.36*7, 21.33*0}, 0}, + {{4|(2<<4)}, {20.36*8, 21.33*0}, 0}, + {{4|(3<<4)}, {20.36*9, 21.33*0}, 0}, + {{4|(4<<4)}, {20.36*10,21.33*0}, 0}, + {{4|(5<<4)}, {20.36*11,21.33*0}, 1}, + + {{1|(0<<4)}, {20.36*0, 21.33*1}, 1}, + {{1|(1<<4)}, {20.36*1, 21.33*1}, 0}, + {{1|(2<<4)}, {20.36*2, 21.33*1}, 0}, + {{1|(3<<4)}, {20.36*3, 21.33*1}, 0}, + {{1|(4<<4)}, {20.36*4, 21.33*1}, 0}, + {{1|(5<<4)}, {20.36*5, 21.33*1}, 0}, + {{5|(0<<4)}, {20.36*6, 21.33*1}, 0}, + {{5|(1<<4)}, {20.36*7, 21.33*1}, 0}, + {{5|(2<<4)}, {20.36*8, 21.33*1}, 0}, + {{5|(3<<4)}, {20.36*9, 21.33*1}, 0}, + {{5|(4<<4)}, {20.36*10,21.33*1}, 0}, + {{5|(5<<4)}, {20.36*11,21.33*1}, 1}, + + {{2|(0<<4)}, {20.36*0, 21.33*2}, 1}, + {{2|(1<<4)}, {20.36*1, 21.33*2}, 0}, + {{2|(2<<4)}, {20.36*2, 21.33*2}, 0}, + {{2|(3<<4)}, {20.36*3, 21.33*2}, 0}, + {{2|(4<<4)}, {20.36*4, 21.33*2}, 0}, + {{2|(5<<4)}, {20.36*5, 21.33*2}, 0}, + {{6|(0<<4)}, {20.36*6, 21.33*2}, 0}, + {{6|(1<<4)}, {20.36*7, 21.33*2}, 0}, + {{6|(2<<4)}, {20.36*8, 21.33*2}, 0}, + {{6|(3<<4)}, {20.36*9, 21.33*2}, 0}, + {{6|(4<<4)}, {20.36*10,21.33*2}, 0}, + {{6|(5<<4)}, {20.36*11,21.33*2}, 1}, + + {{3|(0<<4)}, {20.36*0, 21.33*3}, 1}, + {{3|(1<<4)}, {20.36*1, 21.33*3}, 1}, + {{3|(2<<4)}, {20.36*2, 21.33*3}, 1}, + {{7|(3<<4)}, {20.36*3, 21.33*3}, 1}, + {{7|(4<<4)}, {20.36*4, 21.33*3}, 1}, + {{7|(5<<4)}, {20.36*5.5,21.33*3}, 0}, + {{7|(0<<4)}, {20.36*7, 21.33*3}, 1}, + {{7|(1<<4)}, {20.36*8, 21.33*3}, 1}, + {{7|(2<<4)}, {20.36*9, 21.33*3}, 1}, + {{3|(3<<4)}, {20.36*10,21.33*3}, 1}, + {{3|(4<<4)}, {20.36*11,21.33*3}, 1} +}; + +void matrix_init_kb(void) { + matrix_init_user(); + + palSetPadMode(GPIOB, 8, PAL_MODE_OUTPUT_PUSHPULL); + palSetPadMode(GPIOB, 9, PAL_MODE_OUTPUT_PUSHPULL); + + palClearPad(GPIOB, 8); + palClearPad(GPIOB, 9); +} + +void matrix_scan_kb(void) { + matrix_scan_user(); +} + +uint32_t layer_state_set_kb(uint32_t state) { + + palClearPad(GPIOB, 8); + palClearPad(GPIOB, 9); + state = layer_state_set_user(state); + uint8_t layer = biton32(state); + switch (layer) { + case 3: + palSetPad(GPIOB, 9); + break; + case 4: + palSetPad(GPIOB, 8); + break; + case 6: + palSetPad(GPIOB, 9); + palSetPad(GPIOB, 8); + break; + default: + break; + } + return state; +} diff --git a/keyboards/planck/ez/ez.h b/keyboards/planck/ez/ez.h new file mode 100644 index 00000000000..a3ca2b6eceb --- /dev/null +++ b/keyboards/planck/ez/ez.h @@ -0,0 +1,107 @@ +/* Copyright 2018 Jack Humbert + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ +#pragma once + +#include "planck.h" + +#define LAYOUT_planck_1x2uC( \ + k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, \ + k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, \ + k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, \ + k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a \ +) \ +{ \ + { k00, k01, k02, k03, k04, k05 }, \ + { k10, k11, k12, k13, k14, k15 }, \ + { k20, k21, k22, k23, k24, k25 }, \ + { k30, k31, k32, k39, k3a, k3b }, \ + { k06, k07, k08, k09, k0a, k0b }, \ + { k16, k17, k18, k19, k1a, k1b }, \ + { k26, k27, k28, k29, k2a, k2b }, \ + { k36, k37, k38, k33, k34, k35 } \ +} + +#define LAYOUT_planck_1x2uR( \ + k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, \ + k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, \ + k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, \ + k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a \ +) \ +{ \ + { k00, k01, k02, k03, k04, k05 }, \ + { k10, k11, k12, k13, k14, k15 }, \ + { k20, k21, k22, k23, k24, k25 }, \ + { k30, k31, k32, k39, k3a, k3b }, \ + { k06, k07, k08, k09, k0a, k0b }, \ + { k16, k17, k18, k19, k1a, k1b }, \ + { k26, k27, k28, k29, k2a, k2b }, \ + { k36, k37, k38, k33, k34, k35 } \ +} + +#define LAYOUT_planck_1x2uL( \ + k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, \ + k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, \ + k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, \ + k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a \ +) \ +{ \ + { k00, k01, k02, k03, k04, k05 }, \ + { k10, k11, k12, k13, k14, k15 }, \ + { k20, k21, k22, k23, k24, k25 }, \ + { k30, k31, k32, k39, k3a, k3b }, \ + { k06, k07, k08, k09, k0a, k0b }, \ + { k16, k17, k18, k19, k1a, k1b }, \ + { k26, k27, k28, k29, k2a, k2b }, \ + { k36, k37, k38, k33, k34, k35 } \ +} + +#define LAYOUT_planck_2x2u( \ + k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, \ + k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, \ + k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, \ + k30, k31, k32, k33, k34, k36, k37, k38, k39, k3a \ +) \ +{ \ + { k00, k01, k02, k03, k04, k05 }, \ + { k10, k11, k12, k13, k14, k15 }, \ + { k20, k21, k22, k23, k24, k25 }, \ + { k30, k31, k32, k39, k3a, k3b }, \ + { k06, k07, k08, k09, k0a, k0b }, \ + { k16, k17, k18, k19, k1a, k1b }, \ + { k26, k27, k28, k29, k2a, k2b }, \ + { k36, k37, k38, k33, k34, k35 } \ +} + +#define LAYOUT_planck_grid( \ + k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, \ + k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, \ + k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, \ + k30, k31, k32, k33, k34, k35, KC_NO, k36, k37, k38, k39, k3a \ +) \ +{ \ + { k00, k01, k02, k03, k04, k05 }, \ + { k10, k11, k12, k13, k14, k15 }, \ + { k20, k21, k22, k23, k24, k25 }, \ + { k30, k31, k32, k39, k3a, KC_NO }, \ + { k06, k07, k08, k09, k0a, k0b }, \ + { k16, k17, k18, k19, k1a, k1b }, \ + { k26, k27, k28, k29, k2a, k2b }, \ + { k36, k37, k38, k33, k34, k35 } \ +} + +#define KEYMAP LAYOUT_planck_grid +#define LAYOUT_ortho_4x12 LAYOUT_planck_grid +#define KC_LAYOUT_ortho_4x12 KC_KEYMAP diff --git a/keyboards/planck/ez/rules.mk b/keyboards/planck/ez/rules.mk new file mode 100644 index 00000000000..c6fb52d2b5b --- /dev/null +++ b/keyboards/planck/ez/rules.mk @@ -0,0 +1,24 @@ +# project specific files +LAYOUTS += ortho_4x12 + +# Cortex version +MCU = STM32F303 + +# Build Options +# comment out to disable the options. +# +BACKLIGHT_ENABLE = no +BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration +## (Note that for BOOTMAGIC on Teensy LC you have to use a custom .ld script.) +MOUSEKEY_ENABLE = yes # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control +CONSOLE_ENABLE = yes # Console for debug +COMMAND_ENABLE = yes # Commands for debug and configuration +#SLEEP_LED_ENABLE = yes # Breathing sleep LED during USB suspend +NKRO_ENABLE = yes # USB Nkey Rollover +CUSTOM_MATRIX = no # Custom matrix file +AUDIO_ENABLE = yes +RGBLIGHT_ENABLE = no +# SERIAL_LINK_ENABLE = yes +ENCODER_ENABLE = yes +RGB_MATRIX_ENABLE = IS31FL3737 diff --git a/keyboards/planck/planck.h b/keyboards/planck/planck.h index d908d80ec4a..4bc5e9c3f28 100644 --- a/keyboards/planck/planck.h +++ b/keyboards/planck/planck.h @@ -5,6 +5,10 @@ #define encoder_update(clockwise) encoder_update_user(uint8_t index, clockwise) +#ifdef KEYBOARD_planck_ez + #include "ez.h" +#endif + #ifdef __AVR__ #define LAYOUT_planck_mit( \ k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, \ @@ -50,7 +54,7 @@ #define LAYOUT_ortho_4x12 LAYOUT_planck_grid #define KC_LAYOUT_ortho_4x12 KC_KEYMAP -#else +#elif KEYBOARD_planck_rev6 #define LAYOUT_planck_1x2uC( \ k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, \ diff --git a/quantum/audio/audio_arm.c b/quantum/audio/audio_arm.c index 6760015ef46..de0cd15c582 100644 --- a/quantum/audio/audio_arm.c +++ b/quantum/audio/audio_arm.c @@ -79,7 +79,7 @@ float startup_song[][2] = STARTUP_SONG; static void gpt_cb8(GPTDriver *gptp); -#define DAC_BUFFER_SIZE 720 +#define DAC_BUFFER_SIZE 100 #ifndef DAC_SAMPLE_MAX #define DAC_SAMPLE_MAX 65535U #endif @@ -98,8 +98,8 @@ static void gpt_cb8(GPTDriver *gptp); RESTART_CHANNEL_1() #define UPDATE_CHANNEL_2_FREQ(freq) gpt7cfg1.frequency = freq * DAC_BUFFER_SIZE; \ RESTART_CHANNEL_2() -#define GET_CHANNEL_1_FREQ gpt6cfg1.frequency -#define GET_CHANNEL_2_FREQ gpt7cfg1.frequency +#define GET_CHANNEL_1_FREQ (uint16_t)(gpt6cfg1.frequency * DAC_BUFFER_SIZE) +#define GET_CHANNEL_2_FREQ (uint16_t)(gpt7cfg1.frequency * DAC_BUFFER_SIZE) /* diff --git a/quantum/rgb_matrix.h b/quantum/rgb_matrix.h index 855ea03230f..0e193dcb2f9 100644 --- a/quantum/rgb_matrix.h +++ b/quantum/rgb_matrix.h @@ -28,7 +28,9 @@ #ifdef IS31FL3731 #include "is31fl3731.h" #elif defined (IS31FL3733) - #include "is31fl3733.h" + #include "is31fl3733.h" +#elif defined (IS31FL3737) + #include "is31fl3737.h" #endif #ifndef RGB_MATRIX_LED_FLUSH_LIMIT diff --git a/quantum/rgb_matrix_drivers.c b/quantum/rgb_matrix_drivers.c index 70b80293ddb..3b7d58483ab 100644 --- a/quantum/rgb_matrix_drivers.c +++ b/quantum/rgb_matrix_drivers.c @@ -23,7 +23,7 @@ * be here if shared between boards. */ -#if defined(IS31FL3731) || defined(IS31FL3733) +#if defined(IS31FL3731) || defined(IS31FL3733) || defined(IS31FL3737) #include "i2c_master.h" @@ -33,23 +33,29 @@ static void init( void ) #ifdef IS31FL3731 IS31FL3731_init( DRIVER_ADDR_1 ); IS31FL3731_init( DRIVER_ADDR_2 ); -#else +#elif defined(IS31FL3733) IS31FL3733_init( DRIVER_ADDR_1 ); +#else + IS31FL3737_init( DRIVER_ADDR_1 ); #endif for ( int index = 0; index < DRIVER_LED_TOTAL; index++ ) { bool enabled = true; // This only caches it for later #ifdef IS31FL3731 IS31FL3731_set_led_control_register( index, enabled, enabled, enabled ); -#else +#elif defined(IS31FL3733) IS31FL3733_set_led_control_register( index, enabled, enabled, enabled ); +#else + IS31FL3737_set_led_control_register( index, enabled, enabled, enabled ); #endif } // This actually updates the LED drivers #ifdef IS31FL3731 IS31FL3731_update_led_control_registers( DRIVER_ADDR_1, DRIVER_ADDR_2 ); -#else +#elif defined(IS31FL3733) IS31FL3733_update_led_control_registers( DRIVER_ADDR_1, DRIVER_ADDR_2 ); +#else + IS31FL3737_update_led_control_registers( DRIVER_ADDR_1, DRIVER_ADDR_2 ); #endif } @@ -65,7 +71,7 @@ const rgb_matrix_driver_t rgb_matrix_driver = { .set_color = IS31FL3731_set_color, .set_color_all = IS31FL3731_set_color_all, }; -#else +#elif defined(IS31FL3733) static void flush( void ) { IS31FL3733_update_pwm_buffers( DRIVER_ADDR_1, DRIVER_ADDR_2 ); @@ -77,6 +83,18 @@ const rgb_matrix_driver_t rgb_matrix_driver = { .set_color = IS31FL3733_set_color, .set_color_all = IS31FL3733_set_color_all, }; +#else +static void flush( void ) +{ + IS31FL3737_update_pwm_buffers( DRIVER_ADDR_1, DRIVER_ADDR_2 ); +} + +const rgb_matrix_driver_t rgb_matrix_driver = { + .init = init, + .flush = flush, + .set_color = IS31FL3737_set_color, + .set_color_all = IS31FL3737_set_color_all, +}; #endif #endif diff --git a/quantum/stm32/halconf.h b/quantum/stm32/halconf.h index 8fe8e0c6f58..c3e0cbb728c 100644 --- a/quantum/stm32/halconf.h +++ b/quantum/stm32/halconf.h @@ -76,7 +76,7 @@ * @brief Enables the I2C subsystem. */ #if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C FALSE +#define HAL_USE_I2C TRUE #endif /** diff --git a/quantum/stm32/mcuconf.h b/quantum/stm32/mcuconf.h index 7c3c6e570ce..36f8ca2252a 100644 --- a/quantum/stm32/mcuconf.h +++ b/quantum/stm32/mcuconf.h @@ -154,7 +154,7 @@ /* * I2C driver system settings. */ -#define STM32_I2C_USE_I2C1 FALSE +#define STM32_I2C_USE_I2C1 TRUE #define STM32_I2C_USE_I2C2 FALSE #define STM32_I2C_BUSY_TIMEOUT 50 #define STM32_I2C_I2C1_IRQ_PRIORITY 10 From 3761c28bf9a0d8c117b124c8d1a958e033b1e99f Mon Sep 17 00:00:00 2001 From: Alex Ong Date: Tue, 9 Apr 2019 14:52:38 +1000 Subject: [PATCH 065/171] ergodox_ez: fixed bug where debounce() was called without calculating changed (#5589) --- keyboards/ergodox_ez/matrix.c | 27 ++++++++++++++++++++------- 1 file changed, 20 insertions(+), 7 deletions(-) diff --git a/keyboards/ergodox_ez/matrix.c b/keyboards/ergodox_ez/matrix.c index 97f764113b2..6f604ae2b95 100644 --- a/keyboards/ergodox_ez/matrix.c +++ b/keyboards/ergodox_ez/matrix.c @@ -123,6 +123,17 @@ void matrix_power_up(void) { #endif } +// Reads and stores a row, returning +// whether a change occurred. +static inline bool store_raw_matrix_row(uint8_t index) { + matrix_row_t temp = read_cols(index); + if (raw_matrix[index] != temp) { + raw_matrix[index] = temp; + return true; + } + return false; +} + uint8_t matrix_scan(void) { if (mcp23018_status) { // if there was an error if (++mcp23018_reset_loop == 0) { @@ -157,22 +168,24 @@ uint8_t matrix_scan(void) { #ifdef LEFT_LEDS mcp23018_status = ergodox_left_leds_update(); #endif // LEFT_LEDS + bool changed = false; for (uint8_t i = 0; i < MATRIX_ROWS_PER_SIDE; i++) { // select rows from left and right hands - select_row(i); - select_row(i + MATRIX_ROWS_PER_SIDE); + uint8_t left_index = i; + uint8_t right_index = i + MATRIX_ROWS_PER_SIDE; + select_row(left_index); + select_row(right_index); // we don't need a 30us delay anymore, because selecting a // left-hand row requires more than 30us for i2c. - - // grab left + right cols. - raw_matrix[i] = read_cols(i); - raw_matrix[i+MATRIX_ROWS_PER_SIDE] = read_cols(i+MATRIX_ROWS_PER_SIDE); + changed |= store_raw_matrix_row(left_index); + changed |= store_raw_matrix_row(right_index); + unselect_rows(); } - debounce(raw_matrix, matrix, MATRIX_ROWS, true); + debounce(raw_matrix, matrix, MATRIX_ROWS, changed); matrix_scan_quantum(); return 1; From 45620fd289ad81f6bd34cf6a95e86f86d7577b9a Mon Sep 17 00:00:00 2001 From: zvecr Date: Wed, 10 Apr 2019 00:39:06 +0100 Subject: [PATCH 066/171] Remove ps2avrGB since its a hangover from the keyboards/winkeyless refactor (#5592) --- keyboards/ps2avrGB/README.md | 78 ---- keyboards/ps2avrGB/bmini.h | 60 --- keyboards/ps2avrGB/config.h | 38 -- keyboards/ps2avrGB/i2c.c | 106 ------ keyboards/ps2avrGB/i2c.h | 27 -- keyboards/ps2avrGB/keymaps/default/keymap.c | 37 -- keyboards/ps2avrGB/matrix.c | 112 ------ keyboards/ps2avrGB/ps2avrGB.c | 78 ---- keyboards/ps2avrGB/ps2avrGB.h | 24 -- keyboards/ps2avrGB/rules.mk | 50 --- keyboards/ps2avrGB/usbconfig.h | 396 -------------------- 11 files changed, 1006 deletions(-) delete mode 100644 keyboards/ps2avrGB/README.md delete mode 100644 keyboards/ps2avrGB/bmini.h delete mode 100644 keyboards/ps2avrGB/config.h delete mode 100644 keyboards/ps2avrGB/i2c.c delete mode 100644 keyboards/ps2avrGB/i2c.h delete mode 100644 keyboards/ps2avrGB/keymaps/default/keymap.c delete mode 100644 keyboards/ps2avrGB/matrix.c delete mode 100644 keyboards/ps2avrGB/ps2avrGB.c delete mode 100644 keyboards/ps2avrGB/ps2avrGB.h delete mode 100644 keyboards/ps2avrGB/rules.mk delete mode 100644 keyboards/ps2avrGB/usbconfig.h diff --git a/keyboards/ps2avrGB/README.md b/keyboards/ps2avrGB/README.md deleted file mode 100644 index 8a558b15867..00000000000 --- a/keyboards/ps2avrGB/README.md +++ /dev/null @@ -1,78 +0,0 @@ -ps2avrGB keyboard firmware -========================== - -This is a port of the QMK firmware for boards that are based on the -ps2avrGB firmware, like the [ps2avrGB -keyboard](https://www.keyclack.com/product/gb-ps2avrgb/) or the ones sold -by [Winkeyless](http://winkeyless.kr/product/ps2avrgb-parts/). - -Note that this is a complete replacement for the firmware, so you won't be -using Bootmapper Client to change any keyboard settings, since not all the -USB report options are supported. - -This is an example based on the b.mini keyboard for making other keyboards -compatible with QMK; fully supported boards have their own directory. - -## Supported Boards - -- [b.fake](https://github.com/qmk/qmk_firmware/tree/master/keyboards/bfake) -- [b.mini](https://github.com/qmk/qmk_firmware/tree/master/keyboards/bmini) -- [b.face](https://github.com/qmk/qmk_firmware/tree/master/keyboards/bface) -- [pearl](https://github.com/qmk/qmk_firmware/tree/master/keyboards/pearl) - -## Installing - -First, install the requirements. These commands are for OSX, but all you -need is the AVR toolchain and `bootloadHID` for flashing: - -``` -$ brew cask install crosspack-avr -$ brew install --HEAD https://raw.githubusercontent.com/robertgzr/homebrew-tap/master/bootloadhid.rb -``` - -In order to use the `./util/atmega32a_program.py` script, which can reboot the board into -the bootloader, you'll need Python 2 with PyUSB installed: - -``` -$ pip install pyusb -``` - -Then, with the keyboard plugged in, simply run this command from the -`qmk_firmware` directory: - -``` -$ make ps2avrGB:program -``` - -If you prefer, you can just build it and flash the firmware directly with -`bootloadHID` if you boot the board while holding down `L_Ctrl` to keep it -in the bootloader: - -``` -$ make ps2avrGB -$ bootloadHID -r ps2avrGB_default.hex -``` - -## Setting the board to bootloader mode - -If you're lucky, the programming script does this automagically for you. If -however this doesn't work for you, you need to enter the bootloader mode manually -by plugging the keyboard in while holding the bootloader key. If you did this -correctly the LEDs will blink and you'll be able to flash your firmware. - -The bootloader key is the top left key of your matrix. For a standard board -from winkeyless.kr this is `L_Ctrl`, but for some custom boards running ps2avrGB -this might be different. For the Pearl it's `Esc`, for a b.fake it is `q`. If -you're unsure you should be able to see the key in the bootmapper client. - - -## Troubleshooting - -From my experience, it's really hard to brick these boards. But these -tricks have been useful when it got stuck in a weird scenario. - -1. Try plugging the board in while holding the bootloader key. This will force - it to boot only the bootloader without loading the firmware. Once this is - done, just reflash the board with the original firmware. -2. Sometimes USB hubs can act weird, so try connecting the board directly - to your computer or plugging/unplugging the USB hub. diff --git a/keyboards/ps2avrGB/bmini.h b/keyboards/ps2avrGB/bmini.h deleted file mode 100644 index 65ffbe94797..00000000000 --- a/keyboards/ps2avrGB/bmini.h +++ /dev/null @@ -1,60 +0,0 @@ -/* -Copyright 2017 Luiz Ribeiro - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see . -*/ - -#ifndef BMINI_H -#define BMINI_H - -#include "quantum.h" - -#define KEYMAP( \ - K05, K25, K35, K45, K55, K06, KA6, KA7, K07, KB5, KC5, KD5, KE5, KD1, KE1, KE2, \ - K04, K14, K24, K34, K44, K54, K16, KB6, KB7, K17, KA4, KB4, KC4, KE4, KD0, \ - K03, K13, K23, K33, K43, K53, K26, KC6, KC7, K27, KA3, KB3, KC3, KD3, K67, \ - K02, K12, K22, K32, K42, K52, K36, KD6, KD7, K37, KA2, KB2, KD2, KE0, \ - K01, K11, K21, K31, K41, K51, K46, KE6, KE7, K47, KA1, KB1, K86, K77, \ - K00, K10, K20, K56, K57, KB0, KC0, K66, K76, K96 \ -){ \ - { K00, K10, K20, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KB0, KC0, KD0, KE0 }, \ - { K01, K11, K21, K31, K41, K51, KC_NO, KC_NO, KC_NO, KC_NO, KA1, KB1, KC_NO, KD1, KE1 }, \ - { K02, K12, K22, K32, K42, K52, KC_NO, KC_NO, KC_NO, KC_NO, KA2, KB2, KC_NO, KD2, KE2 }, \ - { K03, K13, K23, K33, K43, K53, KC_NO, KC_NO, KC_NO, KC_NO, KA3, KB3, KC3, KD3, KC_NO }, \ - { K04, K14, K24, K34, K44, K54, KC_NO, KC_NO, KC_NO, KC_NO, KA4, KB4, KC4, KC_NO, KE4 }, \ - { K05, KC_NO, K25, K35, K45, K55, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KB5, KC5, KD5, KE5 }, \ - { K06, K16, K26, K36, K46, K56, K66, K76, K86, K96, KA6, KB6, KC6, KD6, KE6 }, \ - { K07, K17, K27, K37, K47, K57, K67, K77, KC_NO, KC_NO, KA7, KB7, KC7, KD7, KE7 } \ -} - -#define KC_KEYMAP( \ - K05, K25, K35, K45, K55, K06, KA6, KA7, K07, KB5, KC5, KD5, KE5, KD1, KE1, KE2, \ - K04, K14, K24, K34, K44, K54, K16, KB6, KB7, K17, KA4, KB4, KC4, KE4, KD0, \ - K03, K13, K23, K33, K43, K53, K26, KC6, KC7, K27, KA3, KB3, KC3, KD3, K67, \ - K02, K12, K22, K32, K42, K52, K36, KD6, KD7, K37, KA2, KB2, KD2, KE0, \ - K01, K11, K21, K31, K41, K51, K46, KE6, KE7, K47, KA1, KB1, K86, K77, \ - K00, K10, K20, K56, K57, KB0, KC0, K66, K76, K96 \ -) \ -{ \ - { KC_##K00, KC_##K10, KC_##K20, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_##KB0, KC_##KC0, KC_##KD0, KC_##KE0 }, \ - { KC_##K01, KC_##K11, KC_##K21, KC_##K31, KC_##K41, KC_##K51, KC_NO, KC_NO, KC_NO, KC_NO, KC_##KA1, KC_##KB1, KC_NO, KC_##KD1, KC_##KE1 }, \ - { KC_##K02, KC_##K12, KC_##K22, KC_##K32, KC_##K42, KC_##K52, KC_NO, KC_NO, KC_NO, KC_NO, KC_##KA2, KC_##KB2, KC_NO, KC_##KD2, KC_##KE2 }, \ - { KC_##K03, KC_##K13, KC_##K23, KC_##K33, KC_##K43, KC_##K53, KC_NO, KC_NO, KC_NO, KC_NO, KC_##KA3, KC_##KB3, KC_##KC3, KC_##KD3, KC_NO }, \ - { KC_##K04, KC_##K14, KC_##K24, KC_##K34, KC_##K44, KC_##K54, KC_NO, KC_NO, KC_NO, KC_NO, KC_##KA4, KC_##KB4, KC_##KC4, KC_NO, KC_##KE4 }, \ - { KC_##K05, KC_NO, KC_##K25, KC_##K35, KC_##K45, KC_##K55, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_##KB5, KC_##KC5, KC_##KD5, KC_##KE5 }, \ - { KC_##K06, KC_##K16, KC_##K26, KC_##K36, KC_##K46, KC_##K56, KC_##K66, KC_##K76, KC_##K86, KC_##K96, KC_##KA6, KC_##KB6, KC_##KC6, KC_##KD6, KC_##KE6 }, \ - { KC_##K07, KC_##K17, KC_##K27, KC_##K37, KC_##K47, KC_##K57, KC_##K67, KC_##K77, KC_NO, KC_NO, KC_##KA7, KC_##KB7, KC_##KC7, KC_##KD7, KC_##KE7 } \ -} - -#endif diff --git a/keyboards/ps2avrGB/config.h b/keyboards/ps2avrGB/config.h deleted file mode 100644 index c0de5a2116b..00000000000 --- a/keyboards/ps2avrGB/config.h +++ /dev/null @@ -1,38 +0,0 @@ -/* -Copyright 2017 Luiz Ribeiro - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see . -*/ - -#ifndef CONFIG_H -#define CONFIG_H - -#define VENDOR_ID 0x20A0 -#define PRODUCT_ID 0x422D -// TODO: share these strings with usbconfig.h -// Edit usbconfig.h to change these. -#define MANUFACTURER winkeyless.kr -#define PRODUCT ps2avrGB - -/* matrix size */ -#define MATRIX_ROWS 8 -#define MATRIX_COLS 15 - -#define RGBLED_NUM 16 -#define RGBLIGHT_ANIMATIONS - -#define NO_UART 1 -#define BOOTLOADHID_BOOTLOADER 1 - -#endif diff --git a/keyboards/ps2avrGB/i2c.c b/keyboards/ps2avrGB/i2c.c deleted file mode 100644 index a4f95213524..00000000000 --- a/keyboards/ps2avrGB/i2c.c +++ /dev/null @@ -1,106 +0,0 @@ -/* -Copyright 2016 Luiz Ribeiro - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see . -*/ - -// Please do not modify this file - -#include -#include - -#include "i2c.h" - -void i2c_set_bitrate(uint16_t bitrate_khz) { - uint8_t bitrate_div = ((F_CPU / 1000l) / bitrate_khz); - if (bitrate_div >= 16) { - bitrate_div = (bitrate_div - 16) / 2; - } - TWBR = bitrate_div; -} - -void i2c_init(void) { - // set pull-up resistors on I2C bus pins - PORTC |= 0b11; - - i2c_set_bitrate(400); - - // enable TWI (two-wire interface) - TWCR |= (1 << TWEN); - - // enable TWI interrupt and slave address ACK - TWCR |= (1 << TWIE); - TWCR |= (1 << TWEA); -} - -uint8_t i2c_start(uint8_t address) { - // reset TWI control register - TWCR = 0; - - // begin transmission and wait for it to end - TWCR = (1< - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see . -*/ - -// Please do not modify this file - -#ifndef __I2C_H__ -#define __I2C_H__ - -void i2c_init(void); -void i2c_set_bitrate(uint16_t bitrate_khz); -uint8_t i2c_send(uint8_t address, uint8_t *data, uint16_t length); - -#endif diff --git a/keyboards/ps2avrGB/keymaps/default/keymap.c b/keyboards/ps2avrGB/keymaps/default/keymap.c deleted file mode 100644 index 6b3403ed7c8..00000000000 --- a/keyboards/ps2avrGB/keymaps/default/keymap.c +++ /dev/null @@ -1,37 +0,0 @@ -/* -Copyright 2017 Luiz Ribeiro - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see . -*/ - -#include QMK_KEYBOARD_H - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - [0] = KEYMAP( - KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR,KC_HOME,KC_END, - KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS,KC_EQL, KC_BSPC, KC_DEL, - KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC,KC_RBRC,KC_BSLS, KC_INS, - MO(0), KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN,KC_QUOT,KC_ENT, KC_PGUP, - KC_LSFT,KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM,KC_DOT, KC_SLSH,KC_RSFT, KC_UP, KC_PGDN, - KC_LCTL,KC_LALT,KC_LGUI, KC_SPC, KC_RGUI,KC_RALT,KC_RCTL,KC_LEFT,KC_DOWN,KC_RGHT - ), - [1] = KEYMAP( - KC_TRNS,RGB_TOG,RGB_MOD,RGB_HUI,RGB_SAI,RGB_VAI,RGB_HUD,RGB_SAD,RGB_VAD,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_END, - KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_DEL, - KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_INS, - KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, - KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS,KC_TRNS, - KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_RGHT - ), -}; diff --git a/keyboards/ps2avrGB/matrix.c b/keyboards/ps2avrGB/matrix.c deleted file mode 100644 index 245813dfd2d..00000000000 --- a/keyboards/ps2avrGB/matrix.c +++ /dev/null @@ -1,112 +0,0 @@ -/* -Copyright 2017 Luiz Ribeiro - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see . -*/ - -#include -#include - -#include "matrix.h" - -#ifndef DEBOUNCE -# define DEBOUNCE 5 -#endif - -static uint8_t debouncing = DEBOUNCE; - -static matrix_row_t matrix[MATRIX_ROWS]; -static matrix_row_t matrix_debouncing[MATRIX_ROWS]; - -void matrix_set_row_status(uint8_t row); -uint8_t bit_reverse(uint8_t x); - -void matrix_init(void) { - // all outputs for rows high - DDRB = 0xFF; - PORTB = 0xFF; - // all inputs for columns - DDRA = 0x00; - DDRC &= ~(0x111111<<2); - DDRD &= ~(1< 7 - (~PINA) & 0xFF - ) | ( - // cols 8..13, PORTC 7 -> 0 - bit_reverse((~PINC) & 0xFF) << 8 - ) | ( - // col 14, PORTD 7 - ((~PIND) & (1 << PIND7)) << 7 - ); - - if (matrix_debouncing[row] != cols) { - matrix_debouncing[row] = cols; - debouncing = DEBOUNCE; - } - } - - if (debouncing) { - if (--debouncing) { - _delay_ms(1); - } else { - for (uint8_t i = 0; i < MATRIX_ROWS; i++) { - matrix[i] = matrix_debouncing[i]; - } - } - } - - matrix_scan_quantum(); - - return 1; -} - -// declarations -void matrix_set_row_status(uint8_t row) { - DDRB = (1 << row); - PORTB = ~(1 << row); -} - -uint8_t bit_reverse(uint8_t x) { - x = ((x >> 1) & 0x55) | ((x << 1) & 0xaa); - x = ((x >> 2) & 0x33) | ((x << 2) & 0xcc); - x = ((x >> 4) & 0x0f) | ((x << 4) & 0xf0); - return x; -} - -inline matrix_row_t matrix_get_row(uint8_t row) { - return matrix[row]; -} - -void matrix_print(void) { -} diff --git a/keyboards/ps2avrGB/ps2avrGB.c b/keyboards/ps2avrGB/ps2avrGB.c deleted file mode 100644 index 45ba37bffe7..00000000000 --- a/keyboards/ps2avrGB/ps2avrGB.c +++ /dev/null @@ -1,78 +0,0 @@ -/* -Copyright 2017 Luiz Ribeiro - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see . -*/ - -#include "ps2avrGB.h" -#include "rgblight.h" - -#include - -#include "action_layer.h" -#include "i2c.h" -#include "quantum.h" - -// for keyboard subdirectory level init functions -// @Override -void matrix_init_kb(void) { - // call user level keymaps, if any - matrix_init_user(); -} - -#ifdef RGBLIGHT_ENABLE -extern rgblight_config_t rgblight_config; - -// custom RGB driver -void rgblight_set(void) { - if (!rgblight_config.enable) { - for (uint8_t i=0; i - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see . -*/ - -#ifndef KEYMAP_COMMON_H -#define KEYMAP_COMMON_H - -#include "quantum.h" -#include "bmini.h" - -#endif diff --git a/keyboards/ps2avrGB/rules.mk b/keyboards/ps2avrGB/rules.mk deleted file mode 100644 index 95d287f7f41..00000000000 --- a/keyboards/ps2avrGB/rules.mk +++ /dev/null @@ -1,50 +0,0 @@ -# Copyright 2017 Luiz Ribeiro -# -# This program is free software: you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation, either version 2 of the License, or -# (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program. If not, see . - -# MCU name -MCU = atmega32a -PROTOCOL = VUSB - -# unsupported features for now -NO_UART = yes -NO_SUSPEND_POWER_DOWN = yes - -# processor frequency -F_CPU = 12000000 - -# Bootloader -# This definition is optional, and if your keyboard supports multiple bootloaders of -# different sizes, comment this out, and the correct address will be loaded -# automatically (+60). See bootloader.mk for all options. -BOOTLOADER = atmel-dfu - -# build options -BOOTMAGIC_ENABLE = full -MOUSEKEY_ENABLE = no -EXTRAKEY_ENABLE = yes -CONSOLE_ENABLE = yes -COMMAND_ENABLE = yes -BACKLIGHT_ENABLE = no -RGBLIGHT_ENABLE = yes -RGBLIGHT_CUSTOM_DRIVER = yes - -OPT_DEFS = -DDEBUG_LEVEL=0 - -# custom matrix setup -CUSTOM_MATRIX = yes -SRC = matrix.c i2c.c - -# programming options -PROGRAM_CMD = ./util/atmega32a_program.py $(TARGET).hex diff --git a/keyboards/ps2avrGB/usbconfig.h b/keyboards/ps2avrGB/usbconfig.h deleted file mode 100644 index d2d848fcdc8..00000000000 --- a/keyboards/ps2avrGB/usbconfig.h +++ /dev/null @@ -1,396 +0,0 @@ -/* Name: usbconfig.h - * Project: V-USB, virtual USB port for Atmel's(r) AVR(r) microcontrollers - * Author: Christian Starkjohann - * Creation Date: 2005-04-01 - * Tabsize: 4 - * Copyright: (c) 2005 by OBJECTIVE DEVELOPMENT Software GmbH - * License: GNU GPL v2 (see License.txt), GNU GPL v3 or proprietary (CommercialLicense.txt) - * This Revision: $Id: usbconfig-prototype.h 785 2010-05-30 17:57:07Z cs $ - */ - -#ifndef __usbconfig_h_included__ -#define __usbconfig_h_included__ - -#include "config.h" - -/* -General Description: -This file is an example configuration (with inline documentation) for the USB -driver. It configures V-USB for USB D+ connected to Port D bit 2 (which is -also hardware interrupt 0 on many devices) and USB D- to Port D bit 4. You may -wire the lines to any other port, as long as D+ is also wired to INT0 (or any -other hardware interrupt, as long as it is the highest level interrupt, see -section at the end of this file). -*/ - -/* ---------------------------- Hardware Config ---------------------------- */ - -#define USB_CFG_IOPORTNAME D -/* This is the port where the USB bus is connected. When you configure it to - * "B", the registers PORTB, PINB and DDRB will be used. - */ -#define USB_CFG_DMINUS_BIT 3 -/* This is the bit number in USB_CFG_IOPORT where the USB D- line is connected. - * This may be any bit in the port. - */ -#define USB_CFG_DPLUS_BIT 2 -/* This is the bit number in USB_CFG_IOPORT where the USB D+ line is connected. - * This may be any bit in the port. Please note that D+ must also be connected - * to interrupt pin INT0! [You can also use other interrupts, see section - * "Optional MCU Description" below, or you can connect D- to the interrupt, as - * it is required if you use the USB_COUNT_SOF feature. If you use D- for the - * interrupt, the USB interrupt will also be triggered at Start-Of-Frame - * markers every millisecond.] - */ -#define USB_CFG_CLOCK_KHZ (F_CPU/1000) -/* Clock rate of the AVR in kHz. Legal values are 12000, 12800, 15000, 16000, - * 16500, 18000 and 20000. The 12.8 MHz and 16.5 MHz versions of the code - * require no crystal, they tolerate +/- 1% deviation from the nominal - * frequency. All other rates require a precision of 2000 ppm and thus a - * crystal! - * Since F_CPU should be defined to your actual clock rate anyway, you should - * not need to modify this setting. - */ -#define USB_CFG_CHECK_CRC 0 -/* Define this to 1 if you want that the driver checks integrity of incoming - * data packets (CRC checks). CRC checks cost quite a bit of code size and are - * currently only available for 18 MHz crystal clock. You must choose - * USB_CFG_CLOCK_KHZ = 18000 if you enable this option. - */ - -/* ----------------------- Optional Hardware Config ------------------------ */ - -/* #define USB_CFG_PULLUP_IOPORTNAME D */ -/* If you connect the 1.5k pullup resistor from D- to a port pin instead of - * V+, you can connect and disconnect the device from firmware by calling - * the macros usbDeviceConnect() and usbDeviceDisconnect() (see usbdrv.h). - * This constant defines the port on which the pullup resistor is connected. - */ -/* #define USB_CFG_PULLUP_BIT 4 */ -/* This constant defines the bit number in USB_CFG_PULLUP_IOPORT (defined - * above) where the 1.5k pullup resistor is connected. See description - * above for details. - */ - -/* --------------------------- Functional Range ---------------------------- */ - -#define USB_CFG_HAVE_INTRIN_ENDPOINT 1 -/* Define this to 1 if you want to compile a version with two endpoints: The - * default control endpoint 0 and an interrupt-in endpoint (any other endpoint - * number). - */ -#define USB_CFG_HAVE_INTRIN_ENDPOINT3 1 -/* Define this to 1 if you want to compile a version with three endpoints: The - * default control endpoint 0, an interrupt-in endpoint 3 (or the number - * configured below) and a catch-all default interrupt-in endpoint as above. - * You must also define USB_CFG_HAVE_INTRIN_ENDPOINT to 1 for this feature. - */ -#define USB_CFG_EP3_NUMBER 3 -/* If the so-called endpoint 3 is used, it can now be configured to any other - * endpoint number (except 0) with this macro. Default if undefined is 3. - */ -/* #define USB_INITIAL_DATATOKEN USBPID_DATA1 */ -/* The above macro defines the startup condition for data toggling on the - * interrupt/bulk endpoints 1 and 3. Defaults to USBPID_DATA1. - * Since the token is toggled BEFORE sending any data, the first packet is - * sent with the oposite value of this configuration! - */ -#define USB_CFG_IMPLEMENT_HALT 0 -/* Define this to 1 if you also want to implement the ENDPOINT_HALT feature - * for endpoint 1 (interrupt endpoint). Although you may not need this feature, - * it is required by the standard. We have made it a config option because it - * bloats the code considerably. - */ -#define USB_CFG_SUPPRESS_INTR_CODE 0 -/* Define this to 1 if you want to declare interrupt-in endpoints, but don't - * want to send any data over them. If this macro is defined to 1, functions - * usbSetInterrupt() and usbSetInterrupt3() are omitted. This is useful if - * you need the interrupt-in endpoints in order to comply to an interface - * (e.g. HID), but never want to send any data. This option saves a couple - * of bytes in flash memory and the transmit buffers in RAM. - */ -#define USB_CFG_INTR_POLL_INTERVAL 1 -/* If you compile a version with endpoint 1 (interrupt-in), this is the poll - * interval. The value is in milliseconds and must not be less than 10 ms for - * low speed devices. - */ -#define USB_CFG_IS_SELF_POWERED 0 -/* Define this to 1 if the device has its own power supply. Set it to 0 if the - * device is powered from the USB bus. - */ -#define USB_CFG_MAX_BUS_POWER 500 -/* Set this variable to the maximum USB bus power consumption of your device. - * The value is in milliamperes. [It will be divided by two since USB - * communicates power requirements in units of 2 mA.] - */ -#define USB_CFG_IMPLEMENT_FN_WRITE 1 -/* Set this to 1 if you want usbFunctionWrite() to be called for control-out - * transfers. Set it to 0 if you don't need it and want to save a couple of - * bytes. - */ -#define USB_CFG_IMPLEMENT_FN_READ 0 -/* Set this to 1 if you need to send control replies which are generated - * "on the fly" when usbFunctionRead() is called. If you only want to send - * data from a static buffer, set it to 0 and return the data from - * usbFunctionSetup(). This saves a couple of bytes. - */ -#define USB_CFG_IMPLEMENT_FN_WRITEOUT 0 -/* Define this to 1 if you want to use interrupt-out (or bulk out) endpoints. - * You must implement the function usbFunctionWriteOut() which receives all - * interrupt/bulk data sent to any endpoint other than 0. The endpoint number - * can be found in 'usbRxToken'. - */ -#define USB_CFG_HAVE_FLOWCONTROL 0 -/* Define this to 1 if you want flowcontrol over USB data. See the definition - * of the macros usbDisableAllRequests() and usbEnableAllRequests() in - * usbdrv.h. - */ -#define USB_CFG_DRIVER_FLASH_PAGE 0 -/* If the device has more than 64 kBytes of flash, define this to the 64 k page - * where the driver's constants (descriptors) are located. Or in other words: - * Define this to 1 for boot loaders on the ATMega128. - */ -#define USB_CFG_LONG_TRANSFERS 0 -/* Define this to 1 if you want to send/receive blocks of more than 254 bytes - * in a single control-in or control-out transfer. Note that the capability - * for long transfers increases the driver size. - */ -/* #define USB_RX_USER_HOOK(data, len) if(usbRxToken == (uchar)USBPID_SETUP) blinkLED(); */ -/* This macro is a hook if you want to do unconventional things. If it is - * defined, it's inserted at the beginning of received message processing. - * If you eat the received message and don't want default processing to - * proceed, do a return after doing your things. One possible application - * (besides debugging) is to flash a status LED on each packet. - */ -/* #define USB_RESET_HOOK(resetStarts) if(!resetStarts){hadUsbReset();} */ -/* This macro is a hook if you need to know when an USB RESET occurs. It has - * one parameter which distinguishes between the start of RESET state and its - * end. - */ -/* #define USB_SET_ADDRESS_HOOK() hadAddressAssigned(); */ -/* This macro (if defined) is executed when a USB SET_ADDRESS request was - * received. - */ -#define USB_COUNT_SOF 1 -/* define this macro to 1 if you need the global variable "usbSofCount" which - * counts SOF packets. This feature requires that the hardware interrupt is - * connected to D- instead of D+. - */ -/* #ifdef __ASSEMBLER__ - * macro myAssemblerMacro - * in YL, TCNT0 - * sts timer0Snapshot, YL - * endm - * #endif - * #define USB_SOF_HOOK myAssemblerMacro - * This macro (if defined) is executed in the assembler module when a - * Start Of Frame condition is detected. It is recommended to define it to - * the name of an assembler macro which is defined here as well so that more - * than one assembler instruction can be used. The macro may use the register - * YL and modify SREG. If it lasts longer than a couple of cycles, USB messages - * immediately after an SOF pulse may be lost and must be retried by the host. - * What can you do with this hook? Since the SOF signal occurs exactly every - * 1 ms (unless the host is in sleep mode), you can use it to tune OSCCAL in - * designs running on the internal RC oscillator. - * Please note that Start Of Frame detection works only if D- is wired to the - * interrupt, not D+. THIS IS DIFFERENT THAN MOST EXAMPLES! - */ -#define USB_CFG_CHECK_DATA_TOGGLING 0 -/* define this macro to 1 if you want to filter out duplicate data packets - * sent by the host. Duplicates occur only as a consequence of communication - * errors, when the host does not receive an ACK. Please note that you need to - * implement the filtering yourself in usbFunctionWriteOut() and - * usbFunctionWrite(). Use the global usbCurrentDataToken and a static variable - * for each control- and out-endpoint to check for duplicate packets. - */ -#define USB_CFG_HAVE_MEASURE_FRAME_LENGTH 0 -/* define this macro to 1 if you want the function usbMeasureFrameLength() - * compiled in. This function can be used to calibrate the AVR's RC oscillator. - */ -#define USB_USE_FAST_CRC 0 -/* The assembler module has two implementations for the CRC algorithm. One is - * faster, the other is smaller. This CRC routine is only used for transmitted - * messages where timing is not critical. The faster routine needs 31 cycles - * per byte while the smaller one needs 61 to 69 cycles. The faster routine - * may be worth the 32 bytes bigger code size if you transmit lots of data and - * run the AVR close to its limit. - */ - -/* -------------------------- Device Description --------------------------- */ - -#define USB_CFG_VENDOR_ID (VENDOR_ID & 0xFF), ((VENDOR_ID >> 8) & 0xFF) -/* USB vendor ID for the device, low byte first. If you have registered your - * own Vendor ID, define it here. Otherwise you may use one of obdev's free - * shared VID/PID pairs. Be sure to read USB-IDs-for-free.txt for rules! - * *** IMPORTANT NOTE *** - * This template uses obdev's shared VID/PID pair for Vendor Class devices - * with libusb: 0x16c0/0x5dc. Use this VID/PID pair ONLY if you understand - * the implications! - */ -#define USB_CFG_DEVICE_ID (PRODUCT_ID & 0xFF), ((PRODUCT_ID >> 8) & 0xFF) -/* This is the ID of the product, low byte first. It is interpreted in the - * scope of the vendor ID. If you have registered your own VID with usb.org - * or if you have licensed a PID from somebody else, define it here. Otherwise - * you may use one of obdev's free shared VID/PID pairs. See the file - * USB-IDs-for-free.txt for details! - * *** IMPORTANT NOTE *** - * This template uses obdev's shared VID/PID pair for Vendor Class devices - * with libusb: 0x16c0/0x5dc. Use this VID/PID pair ONLY if you understand - * the implications! - */ -#define USB_CFG_DEVICE_VERSION 0x00, 0x02 -/* Version number of the device: Minor number first, then major number. - */ -#define USB_CFG_VENDOR_NAME 'w', 'i', 'n', 'k', 'e', 'y', 'l', 'e', 's', 's', '.', 'k', 'r' -#define USB_CFG_VENDOR_NAME_LEN 13 -/* These two values define the vendor name returned by the USB device. The name - * must be given as a list of characters under single quotes. The characters - * are interpreted as Unicode (UTF-16) entities. - * If you don't want a vendor name string, undefine these macros. - * ALWAYS define a vendor name containing your Internet domain name if you use - * obdev's free shared VID/PID pair. See the file USB-IDs-for-free.txt for - * details. - */ -#define USB_CFG_DEVICE_NAME 'p', 's', '2', 'a', 'v', 'r', 'G', 'B' -#define USB_CFG_DEVICE_NAME_LEN 8 -/* Same as above for the device name. If you don't want a device name, undefine - * the macros. See the file USB-IDs-for-free.txt before you assign a name if - * you use a shared VID/PID. - */ -/*#define USB_CFG_SERIAL_NUMBER 'N', 'o', 'n', 'e' */ -/*#define USB_CFG_SERIAL_NUMBER_LEN 0 */ -/* Same as above for the serial number. If you don't want a serial number, - * undefine the macros. - * It may be useful to provide the serial number through other means than at - * compile time. See the section about descriptor properties below for how - * to fine tune control over USB descriptors such as the string descriptor - * for the serial number. - */ -#define USB_CFG_DEVICE_CLASS 0 -#define USB_CFG_DEVICE_SUBCLASS 0 -/* See USB specification if you want to conform to an existing device class. - * Class 0xff is "vendor specific". - */ -#define USB_CFG_INTERFACE_CLASS 3 /* HID */ -#define USB_CFG_INTERFACE_SUBCLASS 1 /* Boot */ -#define USB_CFG_INTERFACE_PROTOCOL 1 /* Keyboard */ -/* See USB specification if you want to conform to an existing device class or - * protocol. The following classes must be set at interface level: - * HID class is 3, no subclass and protocol required (but may be useful!) - * CDC class is 2, use subclass 2 and protocol 1 for ACM - */ -#define USB_CFG_HID_REPORT_DESCRIPTOR_LENGTH 0 -/* Define this to the length of the HID report descriptor, if you implement - * an HID device. Otherwise don't define it or define it to 0. - * If you use this define, you must add a PROGMEM character array named - * "usbHidReportDescriptor" to your code which contains the report descriptor. - * Don't forget to keep the array and this define in sync! - */ - -/* #define USB_PUBLIC static */ -/* Use the define above if you #include usbdrv.c instead of linking against it. - * This technique saves a couple of bytes in flash memory. - */ - -/* ------------------- Fine Control over USB Descriptors ------------------- */ -/* If you don't want to use the driver's default USB descriptors, you can - * provide our own. These can be provided as (1) fixed length static data in - * flash memory, (2) fixed length static data in RAM or (3) dynamically at - * runtime in the function usbFunctionDescriptor(). See usbdrv.h for more - * information about this function. - * Descriptor handling is configured through the descriptor's properties. If - * no properties are defined or if they are 0, the default descriptor is used. - * Possible properties are: - * + USB_PROP_IS_DYNAMIC: The data for the descriptor should be fetched - * at runtime via usbFunctionDescriptor(). If the usbMsgPtr mechanism is - * used, the data is in FLASH by default. Add property USB_PROP_IS_RAM if - * you want RAM pointers. - * + USB_PROP_IS_RAM: The data returned by usbFunctionDescriptor() or found - * in static memory is in RAM, not in flash memory. - * + USB_PROP_LENGTH(len): If the data is in static memory (RAM or flash), - * the driver must know the descriptor's length. The descriptor itself is - * found at the address of a well known identifier (see below). - * List of static descriptor names (must be declared PROGMEM if in flash): - * char usbDescriptorDevice[]; - * char usbDescriptorConfiguration[]; - * char usbDescriptorHidReport[]; - * char usbDescriptorString0[]; - * int usbDescriptorStringVendor[]; - * int usbDescriptorStringDevice[]; - * int usbDescriptorStringSerialNumber[]; - * Other descriptors can't be provided statically, they must be provided - * dynamically at runtime. - * - * Descriptor properties are or-ed or added together, e.g.: - * #define USB_CFG_DESCR_PROPS_DEVICE (USB_PROP_IS_RAM | USB_PROP_LENGTH(18)) - * - * The following descriptors are defined: - * USB_CFG_DESCR_PROPS_DEVICE - * USB_CFG_DESCR_PROPS_CONFIGURATION - * USB_CFG_DESCR_PROPS_STRINGS - * USB_CFG_DESCR_PROPS_STRING_0 - * USB_CFG_DESCR_PROPS_STRING_VENDOR - * USB_CFG_DESCR_PROPS_STRING_PRODUCT - * USB_CFG_DESCR_PROPS_STRING_SERIAL_NUMBER - * USB_CFG_DESCR_PROPS_HID - * USB_CFG_DESCR_PROPS_HID_REPORT - * USB_CFG_DESCR_PROPS_UNKNOWN (for all descriptors not handled by the driver) - * - * Note about string descriptors: String descriptors are not just strings, they - * are Unicode strings prefixed with a 2 byte header. Example: - * int serialNumberDescriptor[] = { - * USB_STRING_DESCRIPTOR_HEADER(6), - * 'S', 'e', 'r', 'i', 'a', 'l' - * }; - */ - -#define USB_CFG_DESCR_PROPS_DEVICE 0 -#define USB_CFG_DESCR_PROPS_CONFIGURATION USB_PROP_IS_DYNAMIC -//#define USB_CFG_DESCR_PROPS_CONFIGURATION 0 -#define USB_CFG_DESCR_PROPS_STRINGS 0 -#define USB_CFG_DESCR_PROPS_STRING_0 0 -#define USB_CFG_DESCR_PROPS_STRING_VENDOR 0 -#define USB_CFG_DESCR_PROPS_STRING_PRODUCT 0 -#define USB_CFG_DESCR_PROPS_STRING_SERIAL_NUMBER 0 -#define USB_CFG_DESCR_PROPS_HID USB_PROP_IS_DYNAMIC -//#define USB_CFG_DESCR_PROPS_HID 0 -#define USB_CFG_DESCR_PROPS_HID_REPORT USB_PROP_IS_DYNAMIC -//#define USB_CFG_DESCR_PROPS_HID_REPORT 0 -#define USB_CFG_DESCR_PROPS_UNKNOWN 0 - -#define usbMsgPtr_t unsigned short -/* If usbMsgPtr_t is not defined, it defaults to 'uchar *'. We define it to - * a scalar type here because gcc generates slightly shorter code for scalar - * arithmetics than for pointer arithmetics. Remove this define for backward - * type compatibility or define it to an 8 bit type if you use data in RAM only - * and all RAM is below 256 bytes (tiny memory model in IAR CC). - */ - -/* ----------------------- Optional MCU Description ------------------------ */ - -/* The following configurations have working defaults in usbdrv.h. You - * usually don't need to set them explicitly. Only if you want to run - * the driver on a device which is not yet supported or with a compiler - * which is not fully supported (such as IAR C) or if you use a differnt - * interrupt than INT0, you may have to define some of these. - */ -/* #define USB_INTR_CFG MCUCR */ -/* #define USB_INTR_CFG_SET ((1 << ISC00) | (1 << ISC01)) */ -/* #define USB_INTR_CFG_CLR 0 */ -/* #define USB_INTR_ENABLE GIMSK */ -/* #define USB_INTR_ENABLE_BIT INT0 */ -/* #define USB_INTR_PENDING GIFR */ -/* #define USB_INTR_PENDING_BIT INTF0 */ -/* #define USB_INTR_VECTOR INT0_vect */ - -/* Set INT1 for D- falling edge to count SOF */ -/* #define USB_INTR_CFG EICRA */ -#define USB_INTR_CFG_SET ((1 << ISC11) | (0 << ISC10)) -/* #define USB_INTR_CFG_CLR 0 */ -/* #define USB_INTR_ENABLE EIMSK */ -#define USB_INTR_ENABLE_BIT INT1 -/* #define USB_INTR_PENDING EIFR */ -#define USB_INTR_PENDING_BIT INTF1 -#define USB_INTR_VECTOR INT1_vect - -#endif /* __usbconfig_h_included__ */ From 4882f7f16d3d5ef850790c935cf02112a615fd3e Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Konstantin=20=C4=90or=C4=91evi=C4=87?= Date: Wed, 10 Apr 2019 23:15:51 +0200 Subject: [PATCH 067/171] Revert "Update build instructions and docker file to download submodules" (#5533) * Revert "Update build instructions and Dockerfile to download submodules" This reverts commit 93210547bd1bfbbb1ffd56801bb81af46af350a5. * Update build tools docs based on feedback * Fix bad link in build tools docs --- Dockerfile | 2 +- docs/getting_started_build_tools.md | 6 +++--- util/docker_build.sh | 2 +- 3 files changed, 5 insertions(+), 5 deletions(-) diff --git a/Dockerfile b/Dockerfile index c4acfec71aa..6bd5acb3357 100644 --- a/Dockerfile +++ b/Dockerfile @@ -26,4 +26,4 @@ VOLUME /qmk_firmware WORKDIR /qmk_firmware COPY . . -CMD make clean ; make git-submodule ; make $KEYBOARD:$KEYMAP +CMD make $KEYBOARD:$KEYMAP diff --git a/docs/getting_started_build_tools.md b/docs/getting_started_build_tools.md index b72f52e189e..0e1acca66a8 100644 --- a/docs/getting_started_build_tools.md +++ b/docs/getting_started_build_tools.md @@ -2,11 +2,11 @@ This page describes setting up the build environment for QMK. These instructions cover AVR processors (such as the atmega32u4). -After cloning the repo of QMK run `make git-submodule` once to download 3rd party libraries like ChibiOS. - -Note: If it is your first time here, Check out the "Complete Newbs guide" instead +**Note:** If this is your first time here, check out the [Complete Newbs Guide](newbs.md) page. + +Before continuing, double check that your submodules (third-party libraries) are up to date by running `make git-submodule`. ## Linux diff --git a/util/docker_build.sh b/util/docker_build.sh index 35839ac41eb..e7aeac8f3e5 100755 --- a/util/docker_build.sh +++ b/util/docker_build.sh @@ -47,4 +47,4 @@ dir=$(pwd -W 2>/dev/null) || dir=$PWD # Use Windows path if on Windows # Run container and build firmware docker run --rm -it $usb_args -v "$dir":/qmk_firmware qmkfm/qmk_firmware \ - /bin/bash -c "make git-submodule; make \"$keyboard${keymap:+:$keymap}${target:+:$target}\"" + make "$keyboard${keymap:+:$keymap}${target:+:$target}" From 606b1fe82f440258f697896c39d306fefcb9033c Mon Sep 17 00:00:00 2001 From: Noah Frederick Date: Wed, 10 Apr 2019 21:36:05 -0400 Subject: [PATCH 068/171] Remove caveat about combos with shared keys (#5601) Combos with shared keys are supported as of https://github.com/qmk/qmk_firmware/pull/2561. Therefore, this caveat no longer applies. --- docs/feature_combo.md | 1 - 1 file changed, 1 deletion(-) diff --git a/docs/feature_combo.md b/docs/feature_combo.md index a2fd1423c88..680adce2dc2 100644 --- a/docs/feature_combo.md +++ b/docs/feature_combo.md @@ -19,7 +19,6 @@ combo_t key_combos[COMBO_COUNT] = {COMBO(test_combo, KC_ESC)}; This will send "Escape" if you hit the A and B keys. !> This method only supports [basic keycodes](keycodes_basic.md). See the examples for more control. -!> You cannot reuse (share) keys in combos. Each key should only belong to a single combo. ## Examples From fa514e63aaed358dbe4d098e7dc31561f148aec0 Mon Sep 17 00:00:00 2001 From: MechMerlin <30334081+mechmerlin@users.noreply.github.com> Date: Wed, 10 Apr 2019 21:19:27 -0700 Subject: [PATCH 069/171] fix offset in matrix (#5600) --- keyboards/quantrik/kyuu/kyuu.h | 15 +++++++-------- 1 file changed, 7 insertions(+), 8 deletions(-) diff --git a/keyboards/quantrik/kyuu/kyuu.h b/keyboards/quantrik/kyuu/kyuu.h index 82c024f2e7f..25d9d86dd55 100644 --- a/keyboards/quantrik/kyuu/kyuu.h +++ b/keyboards/quantrik/kyuu/kyuu.h @@ -28,15 +28,14 @@ #define LAYOUT( \ k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C, k0D, k0E, k2E, \ k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1A, k1B, k1C, k1D, k1E, \ - k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2A, k2B, k2C, \ + k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2A, k2B, k2C, k2D, \ k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3A, k3B, k3C, k3D, \ - k40, k41, k42, k46, k47, k4A, k4B, k4C, k4D \ + k40, k41, k42, k46, k4A, k4B, k4C, k4D \ ) \ { \ - { k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C, k0D, k0E }, \ - { k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1A, k1B, k1C, k1D, k1E }, \ - { k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2A, k2B, k2C, KC_NO, k2E }, \ - { k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3A, k3B, k3C, k3D, KC_NO }, \ - { k40, k41, k42, KC_NO, KC_NO, KC_NO, k46, k47, KC_NO, KC_NO, k4A, k4B, k4C, k4D, KC_NO }, \ + { k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C, k0D, k0E }, \ + { k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1A, k1B, k1C, k1D, k1E }, \ + { k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2A, k2B, k2C, k2D, k2E }, \ + { k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3A, k3B, k3C, k3D, KC_NO }, \ + { k40, k41, k42, KC_NO, KC_NO, KC_NO, k46, KC_NO, KC_NO, KC_NO, k4A, k4B, k4C, k4D, KC_NO }, \ } - From dc570b0b389d23b8ea8b46311294a7040b5e1e44 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?=E3=81=95=E3=81=8F=E3=82=89=E3=82=93=E3=81=BC?= <47372812+sakurachari@users.noreply.github.com> Date: Fri, 12 Apr 2019 01:07:39 +0900 Subject: [PATCH 070/171] Keyboard: Add yosino58 Keyboard (#5465) * Keyboard: Add yosino58 Keyboard * Keyboard: Add yosino58 Keyboard --- keyboards/yosino58/config.h | 34 + keyboards/yosino58/i2c.c | 162 +++++ keyboards/yosino58/i2c.h | 46 ++ keyboards/yosino58/info.json | 20 + keyboards/yosino58/keymaps/default/config.h | 43 ++ keyboards/yosino58/keymaps/default/keymap.c | 337 ++++++++++ keyboards/yosino58/keymaps/default/rules.mk | 30 + keyboards/yosino58/keymaps/sakura/config.h | 50 ++ keyboards/yosino58/keymaps/sakura/keymap.c | 337 ++++++++++ keyboards/yosino58/keymaps/sakura/rules.mk | 30 + keyboards/yosino58/lib/glcdfont.c | 275 ++++++++ keyboards/yosino58/lib/glcdfont_.c | 243 ++++++++ .../yosino58/lib/host_led_state_reader.c | 15 + keyboards/yosino58/lib/keylogger.c | 45 ++ keyboards/yosino58/lib/layer_state_reader.c | 35 ++ keyboards/yosino58/lib/logo_reader.c | 11 + keyboards/yosino58/lib/mode_icon_reader.c | 15 + keyboards/yosino58/lib/rgb_state_reader.c | 15 + keyboards/yosino58/lib/timelogger.c | 16 + keyboards/yosino58/pro_micro.h | 358 +++++++++++ keyboards/yosino58/rev1/config.h | 72 +++ keyboards/yosino58/rev1/matrix.c | 357 +++++++++++ keyboards/yosino58/rev1/rev1.c | 8 + keyboards/yosino58/rev1/rev1.h | 40 ++ keyboards/yosino58/rev1/rules.mk | 3 + keyboards/yosino58/rev1/serial_config.h | 4 + .../yosino58/rev1/serial_config_simpleapi.h | 5 + keyboards/yosino58/rev1/split_scomm.c | 91 +++ keyboards/yosino58/rev1/split_scomm.h | 24 + keyboards/yosino58/rev1/split_util.c | 70 +++ keyboards/yosino58/rev1/split_util.h | 19 + keyboards/yosino58/rules.mk | 76 +++ keyboards/yosino58/serial.c | 590 ++++++++++++++++++ keyboards/yosino58/serial.h | 84 +++ keyboards/yosino58/ssd1306.c | 348 +++++++++++ keyboards/yosino58/ssd1306.h | 96 +++ keyboards/yosino58/yosino58.c | 10 + keyboards/yosino58/yosino58.h | 5 + 38 files changed, 4019 insertions(+) create mode 100644 keyboards/yosino58/config.h create mode 100644 keyboards/yosino58/i2c.c create mode 100644 keyboards/yosino58/i2c.h create mode 100644 keyboards/yosino58/info.json create mode 100644 keyboards/yosino58/keymaps/default/config.h create mode 100644 keyboards/yosino58/keymaps/default/keymap.c create mode 100644 keyboards/yosino58/keymaps/default/rules.mk create mode 100644 keyboards/yosino58/keymaps/sakura/config.h create mode 100644 keyboards/yosino58/keymaps/sakura/keymap.c create mode 100644 keyboards/yosino58/keymaps/sakura/rules.mk create mode 100644 keyboards/yosino58/lib/glcdfont.c create mode 100644 keyboards/yosino58/lib/glcdfont_.c create mode 100644 keyboards/yosino58/lib/host_led_state_reader.c create mode 100644 keyboards/yosino58/lib/keylogger.c create mode 100644 keyboards/yosino58/lib/layer_state_reader.c create mode 100644 keyboards/yosino58/lib/logo_reader.c create mode 100644 keyboards/yosino58/lib/mode_icon_reader.c create mode 100644 keyboards/yosino58/lib/rgb_state_reader.c create mode 100644 keyboards/yosino58/lib/timelogger.c create mode 100644 keyboards/yosino58/pro_micro.h create mode 100644 keyboards/yosino58/rev1/config.h create mode 100644 keyboards/yosino58/rev1/matrix.c create mode 100644 keyboards/yosino58/rev1/rev1.c create mode 100644 keyboards/yosino58/rev1/rev1.h create mode 100644 keyboards/yosino58/rev1/rules.mk create mode 100644 keyboards/yosino58/rev1/serial_config.h create mode 100644 keyboards/yosino58/rev1/serial_config_simpleapi.h create mode 100644 keyboards/yosino58/rev1/split_scomm.c create mode 100644 keyboards/yosino58/rev1/split_scomm.h create mode 100644 keyboards/yosino58/rev1/split_util.c create mode 100644 keyboards/yosino58/rev1/split_util.h create mode 100644 keyboards/yosino58/rules.mk create mode 100644 keyboards/yosino58/serial.c create mode 100644 keyboards/yosino58/serial.h create mode 100644 keyboards/yosino58/ssd1306.c create mode 100644 keyboards/yosino58/ssd1306.h create mode 100644 keyboards/yosino58/yosino58.c create mode 100644 keyboards/yosino58/yosino58.h diff --git a/keyboards/yosino58/config.h b/keyboards/yosino58/config.h new file mode 100644 index 00000000000..4357a218d4a --- /dev/null +++ b/keyboards/yosino58/config.h @@ -0,0 +1,34 @@ +/* +Copyright 2012 Jun Wako +Copyright 2015 Jack Humbert + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#pragma once + +#include "config_common.h" +#include + +#define USE_I2C +#define USE_SERIAL + +#ifdef USE_Link_Time_Optimization + // LTO has issues with macros (action_get_macro) and "functions" (fn_actions), + // so just disable them + #define NO_ACTION_MACRO + #define NO_ACTION_FUNCTION + + #define DISABLE_LEADER +#endif // USE_Link_Time_Optimization diff --git a/keyboards/yosino58/i2c.c b/keyboards/yosino58/i2c.c new file mode 100644 index 00000000000..4bee5c63982 --- /dev/null +++ b/keyboards/yosino58/i2c.c @@ -0,0 +1,162 @@ +#include +#include +#include +#include +#include +#include +#include "i2c.h" + +#ifdef USE_I2C + +// Limits the amount of we wait for any one i2c transaction. +// Since were running SCL line 100kHz (=> 10μs/bit), and each transactions is +// 9 bits, a single transaction will take around 90μs to complete. +// +// (F_CPU/SCL_CLOCK) => # of μC cycles to transfer a bit +// poll loop takes at least 8 clock cycles to execute +#define I2C_LOOP_TIMEOUT (9+1)*(F_CPU/SCL_CLOCK)/8 + +#define BUFFER_POS_INC() (slave_buffer_pos = (slave_buffer_pos+1)%SLAVE_BUFFER_SIZE) + +volatile uint8_t i2c_slave_buffer[SLAVE_BUFFER_SIZE]; + +static volatile uint8_t slave_buffer_pos; +static volatile bool slave_has_register_set = false; + +// Wait for an i2c operation to finish +inline static +void i2c_delay(void) { + uint16_t lim = 0; + while(!(TWCR & (1<10. + // Check datasheets for more info. + TWBR = ((F_CPU/SCL_CLOCK)-16)/2; +} + +// Start a transaction with the given i2c slave address. The direction of the +// transfer is set with I2C_READ and I2C_WRITE. +// returns: 0 => success +// 1 => error +uint8_t i2c_master_start(uint8_t address) { + TWCR = (1< slave ACK +// 1 => slave NACK +uint8_t i2c_master_write(uint8_t data) { + TWDR = data; + TWCR = (1<= SLAVE_BUFFER_SIZE ) { + ack = 0; + slave_buffer_pos = 0; + } + slave_has_register_set = true; + } else { + i2c_slave_buffer[slave_buffer_pos] = TWDR; + BUFFER_POS_INC(); + } + break; + + case TW_ST_SLA_ACK: + case TW_ST_DATA_ACK: + // master has addressed this device as a slave transmitter and is + // requesting data. + TWDR = i2c_slave_buffer[slave_buffer_pos]; + BUFFER_POS_INC(); + break; + + case TW_BUS_ERROR: // something went wrong, reset twi state + TWCR = 0; + default: + break; + } + // Reset everything, so we are ready for the next TWI interrupt + TWCR |= (1< + +#ifndef F_CPU +#define F_CPU 16000000UL +#endif + +#define I2C_READ 1 +#define I2C_WRITE 0 + +#define I2C_ACK 1 +#define I2C_NACK 0 + +#define SLAVE_BUFFER_SIZE 0x10 + +// i2c SCL clock frequency 400kHz +#define SCL_CLOCK 400000L + +extern volatile uint8_t i2c_slave_buffer[SLAVE_BUFFER_SIZE]; + +void i2c_master_init(void); +uint8_t i2c_master_start(uint8_t address); +void i2c_master_stop(void); +uint8_t i2c_master_write(uint8_t data); +uint8_t i2c_master_read(int); +void i2c_reset_state(void); +void i2c_slave_init(uint8_t address); + + +static inline unsigned char i2c_start_read(unsigned char addr) { + return i2c_master_start((addr << 1) | I2C_READ); +} + +static inline unsigned char i2c_start_write(unsigned char addr) { + return i2c_master_start((addr << 1) | I2C_WRITE); +} + +// from SSD1306 scrips +extern unsigned char i2c_rep_start(unsigned char addr); +extern void i2c_start_wait(unsigned char addr); +extern unsigned char i2c_readAck(void); +extern unsigned char i2c_readNak(void); +extern unsigned char i2c_read(unsigned char ack); + +#define i2c_read(ack) (ack) ? i2c_readAck() : i2c_readNak(); diff --git a/keyboards/yosino58/info.json b/keyboards/yosino58/info.json new file mode 100644 index 00000000000..c591a41dece --- /dev/null +++ b/keyboards/yosino58/info.json @@ -0,0 +1,20 @@ +{ + "keyboard_name": "yosino58 rev. 1", + "url": "https://github.com/sakurachari/yosino58", + "maintainer": "sakuranbo0046", + "width": 16.75, + "height": 6.25, + "layouts": { + "LAYOUT": { + "key_count": 58, + "layout": [ + {"x":0, "y":1}, {"x":1, "y":1}, {"x":2, "y":0.25}, {"x":3, "y":0}, {"x":4, "y":0.25}, {"x":5, "y":0.5}, {"x":10.75, "y":0.5}, {"x":11.75, "y":0.25}, {"x":12.75, "y":0}, {"x":13.75, "y":0.25}, {"x":14.75, "y":1}, {"x":15.75, "y":1}, + {"x":0, "y":2}, {"x":1, "y":2}, {"x":2, "y":1.25}, {"x":3, "y":1}, {"x":4, "y":1.25}, {"x":5, "y":1.5}, {"x":10.75, "y":1.5}, {"x":11.75, "y":1.25}, {"x":12.75, "y":1}, {"x":13.75, "y":1.25}, {"x":14.75, "y":2}, {"x":15.75, "y":2}, + {"x":0, "y":3}, {"x":1, "y":3}, {"x":2, "y":2.25}, {"x":3, "y":2}, {"x":4, "y":2.25}, {"x":5, "y":2.5}, {"x":10.75, "y":2.5}, {"x":11.75, "y":2.25}, {"x":12.75, "y":2}, {"x":13.75, "y":2.25}, {"x":14.75, "y":3}, {"x":15.75, "y":3}, + {"x":0, "y":4}, {"x":1, "y":4}, {"x":2, "y":3.25}, {"x":3, "y":3}, {"x":4, "y":3.25}, {"x":5, "y":3.5}, {"x":6.5, "y":4.25}, {"x":7.5, "y":4.25, "h":2}, {"x":8.5, "y":4.25, "h":2}, {"x":9.5, "y":4.25}, {"x":10.75, "y":3.5}, {"x":11.75, "y":3.25}, {"x":12.75, "y":3}, {"x":13.75, "y":3.25}, {"x":14.75, "y":4}, {"x":15.75, "y":4}, + {"x":3.75, "y":4.25}, {"x":4.75, "y":4.5}, {"x":6.5, "y":5.25}, {"x":9.5, "y":5.25}, {"x":11, "y":4.5}, {"x":12, "y":4.25} + ] + } + } +} + diff --git a/keyboards/yosino58/keymaps/default/config.h b/keyboards/yosino58/keymaps/default/config.h new file mode 100644 index 00000000000..21fc2d3b547 --- /dev/null +++ b/keyboards/yosino58/keymaps/default/config.h @@ -0,0 +1,43 @@ +/* +This is the c configuration file for the keymap + +Copyright 2012 Jun Wako +Copyright 2015 Jack Humbert + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#pragma once + +//#define USE_MATRIX_I2C + +/* Select hand configuration */ + +#define MASTER_LEFT +// #define MASTER_RIGHT +// #define EE_HANDS + +#define SSD1306OLED +// #define SSD1306_128X64 + +#define TAPPING_FORCE_HOLD +#define TAPPING_TERM 100 + +#undef RGBLED_NUM +#define RGBLIGHT_ANIMATIONS +#define RGBLED_NUM 12 +#define RGBLIGHT_LIMIT_VAL 120 +#define RGBLIGHT_HUE_STEP 10 +#define RGBLIGHT_SAT_STEP 17 +#define RGBLIGHT_VAL_STEP 17 \ No newline at end of file diff --git a/keyboards/yosino58/keymaps/default/keymap.c b/keyboards/yosino58/keymaps/default/keymap.c new file mode 100644 index 00000000000..79b50756965 --- /dev/null +++ b/keyboards/yosino58/keymaps/default/keymap.c @@ -0,0 +1,337 @@ +#include QMK_KEYBOARD_H +#ifdef PROTOCOL_LUFA + #include "lufa.h" + #include "split_util.h" +#endif +#ifdef SSD1306OLED + #include "ssd1306.h" +#endif + +extern keymap_config_t keymap_config; + +#ifdef RGBLIGHT_ENABLE +//Following line allows macro to read current RGB settings +extern rgblight_config_t rgblight_config; +#endif + +extern uint8_t is_master; + +// Each layer gets a name for readability, which is then used in the keymap matrix below. +// The underscores don't mean anything - you can have a layer called STUFF or any other name. +// Layer names don't all need to be of the same length, obviously, and you can also skip them +// entirely and just use numbers. +#define _QWERTY 0 +#define _LOWER 1 +#define _RAISE 2 +#define _ADJUST 3 + +enum custom_keycodes { + QWERTY = SAFE_RANGE, + LOWER, + RAISE, + ADJUST, + RGBRST +}; + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { +/* QWERTY + * ,-----------------------------------------. ,-----------------------------------------. + * | ` | 1 | 2 | 3 | 4 | 5 | | 6 | 7 | 8 | 9 | 0 | - | + * |------+------+------+------+------+------| |------+------+------+------+------+------| + * | Tab | Q | W | E | R | T | | Y | U | I | O | P | = | + * |------+------+------+------+------+------| |------+------+------+------+------+------| + * |LShift| A | S | D | F | G | | H | J | K | L | ; | ' | + * |------+------+------+------+------+------| |------+------+------+------+------+------| + * |LCTRL | Z | X | C | V | B |-------.-------. ,---------------| N | M | , | . | / | \ | + * `-----------------------------------------/ Del / / \ \ Bksp \----------------------------------------' + * | LAlt |ADJUST| /-------/ Space / \ Enter \-------\ | [ | ] | + * | | |/ LOWER / / \ \ RAISE \ | | | + * `-----------------------------' '------------------------------' + */ + [_QWERTY] = LAYOUT( \ + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, \ + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_EQL, \ + KC_LSFT, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, \ + KC_LCTRL, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_DEL, KC_SPC, KC_ENT, KC_BSPC, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_BSLS, \ + KC_LALT, ADJUST, LOWER, RAISE, KC_LBRC, KC_RBRC\ + ), + +/* LOWER + * ,-----------------------------------------. ,-----------------------------------------. + * | ESC | F1 | F2 | F3 | F4 | F5 | | F6 | F7 | F8 | F9 | F10 | F11 | + * |------+------+------+------+------+------| |------+------+------+------+------+------| + * | Tab | / | - | 7 | 8 | 9 | | ! | @ | # | $ | % | F12 | + * |------+------+------+------+------+------| |------+------+------+------+------+------| + * |LShift| * | + | 4 | 5 | 6 | | ^ | & | * | ( | ) | - | + * |------+------+------+------+------+------| |------+------+------+------+------+------| + * |LCTRL | . | 0 | 1 | 2 | 3 |-------.-------. ,---------------| | _ | + | { | } | | | + * `-----------------------------------------/ F11 / / \ \ F12 \----------------------------------------' + * | LAlt | LGUI | /-------/ Space / \ Enter \-------\ | Caps | Num | + * | | |/ LOWER / / \ \ \ | | | + * `-----------------------------' '------------------------------' + */ + [_LOWER] = LAYOUT( \ + KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, \ + _______, KC_PSLS, KC_PMNS, KC_P7, KC_P8, KC_P9, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_F12, \ + _______, KC_PAST, KC_PPLS, KC_P4, KC_P5, KC_P6, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_TILD, \ + _______, KC_PDOT, KC_P0, KC_P1, KC_P2, KC_P3, _______, _______, _______, _______, XXXXXXX, KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, KC_PIPE, \ + _______, KC_LGUI, _______, XXXXXXX, KC_CLCK, KC_NLCK\ + + ), + +/* RAISE + * ,-----------------------------------------. ,-----------------------------------------. + * | | | | | | | | | | | | | | + * |------+------+------+------+------+------| |------+------+------+------+------+------| + * | | 1 | 2 | 3 | 4 | 5 | | 6 | 7 | 8 | 9 | 0 | | + * |------+------+------+------+------+------| |------+------+------+------+------+------| + * | F1 | F2 | F3 | F4 | F5 | F6 | | | | | | | | + * |------+------+------+------+------+------| |------+------+------+------+------+------| + * | F7 | F8 | F9 | F10 | F11 | F12 |-------.-------. ,---------------| | | | | | | + * `-----------------------------------------/ / / \ \ \----------------------------------------' + * | | | /-------/ Space / \ Enter \-------\ | | | + * | | |/ / / \ \ RAISE \ | | | + * `-----------------------------' '------------------------------' + */ + [_RAISE] = LAYOUT( \ + XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, \ + XXXXXXX, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, XXXXXXX, \ + KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, XXXXXXX, KC_UP, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, \ + KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, XXXXXXX, _______, _______, XXXXXXX, KC_LEFT, KC_DOWN, KC_RGHT, XXXXXXX, XXXXXXX, XXXXXXX, \ + XXXXXXX, XXXXXXX, XXXXXXX, _______, XXXXXXX, XXXXXXX \ + ), + +/* ADJUST + * ,-----------------------------------------. ,-----------------------------------------. + * |RESET | | | | | | | Mute | Vol+ | Play | | | | + * |------+------+------+------+------+------| |------+------+------+------+------+------| + * | | | | PSCR | SLCK | Pause| | Prev | Vol- | Next | | | | + * |------+------+------+------+------+------| |------+------+------+------+------+------| + * | | | |Insert| Home |PageUP| | | |RGB ON| HUE+ | SAT+ | VAL+ | + * |------+------+------+------+------+------| |------+------+------+------+------+------| + * | | | | Del | End |PageDN|-------.-------. ,---------------| |RGB Re| MODE | HUE- | SAT- | VAL- | + * `-----------------------------------------/ / / \ \ \----------------------------------------' + * | |ADJUST| /-------/ Space / \ Enter \-------\ | | | + * | | |/ / / \ \ \ | | | + * `-----------------------------' '------------------------------' + */ + [_ADJUST] = LAYOUT( \ + RESET, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_MUTE, KC_VOLU, KC_MPLY, XXXXXXX, XXXXXXX, XXXXXXX, \ + XXXXXXX, XXXXXXX, XXXXXXX, KC_PSCR, KC_SLCK, KC_PAUS, KC_MPRV, KC_VOLD, KC_MNXT, XXXXXXX, XXXXXXX, XXXXXXX, \ + XXXXXXX, XXXXXXX, XXXXXXX, KC_INS, KC_HOME, KC_PGUP, XXXXXXX, XXXXXXX, RGB_TOG, RGB_HUI, RGB_SAI, RGB_VAI, \ + XXXXXXX, XXXXXXX, XXXXXXX, KC_DEL, KC_END, KC_PGDN, XXXXXXX, _______, _______, XXXXXXX, XXXXXXX, RGBRST, RGB_MOD, RGB_HUD, RGB_SAD, RGB_VAD, \ + XXXXXXX, _______, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX \ + ) +}; + + +int RGB_current_mode; + +void persistent_default_layer_set(uint16_t default_layer) { + eeconfig_update_default_layer(default_layer); + default_layer_set(default_layer); +} + +// Setting ADJUST layer RGB back to default +void update_tri_layer_RGB(uint8_t layer1, uint8_t layer2, uint8_t layer3) { + if (IS_LAYER_ON(layer1) && IS_LAYER_ON(layer2)) { + layer_on(layer3); + } else { + layer_off(layer3); + } +} + +void matrix_init_user(void) { + #ifdef RGBLIGHT_ENABLE + RGB_current_mode = rgblight_config.mode; + #endif + //SSD1306 OLED init, make sure to add #define SSD1306OLED in config.h + #ifdef SSD1306OLED + #ifdef SSD1306_128X64 + iota_gfx_init(false); // turns on the display + #else + iota_gfx_init(!has_usb()); // turns on the display + #endif + #endif +} + +//SSD1306 OLED update loop, make sure to add #define SSD1306OLED in config.h +#ifdef SSD1306OLED + +//assign the right code to your layers for OLED display +#define L_QWERTY 0 +#define L_LOWER 2 +#define L_RAISE 4 +#define L_ADJUST 8 + +// When add source files to SRC in rules.mk, you can use functions. +const char *read_logo(void); + +void matrix_scan_user(void) { + iota_gfx_task(); +} + +void matrix_render_user(struct CharacterMatrix *matrix) { + if (is_master) { + static char indctr[2][20][5]= + { + // white icon + { + {0x80,0x81,0x82,0x83,0}, + {0x88,0x89,0x8A,0x8B,0}, + {0x90,0x91,0x92,0x93,0}, + {0x98,0x99,0x9A,0x9B,0}, + {0x01,0x02,0x03,0x04,0}, + {0xA0,0xA1,0xA2,0xA3,0}, + {0xA8,0xA9,0xAA,0xAB,0}, + {0xB0,0xB1,0xB2,0xB3,0}, + {0xB8,0xB9,0xBA,0xBB,0}, + {0x21,0x22,0x23,0x24,0}, + {0xC0,0xC1,0xC2,0xC3,0}, + {0xC8,0xC9,0xCA,0xCB,0}, + {0xD0,0xD1,0xD2,0xD3,0}, + {0xD8,0xD9,0xDA,0xDB,0}, + {0x41,0x42,0x43,0x44,0}, + {0xE0,0xE1,0xE2,0xE3,0}, + {0xE8,0xE9,0xEA,0xEB,0}, + {0xF0,0xF1,0xF2,0xF3,0}, + {0xF8,0xF9,0xFA,0xFB,0}, + {0x61,0x62,0x63,0x64,0} + }, + // Black icon + { + {0x84,0x85,0x86,0x87,0}, + {0x8C,0x8D,0x8E,0x8F,0}, + {0x94,0x95,0x96,0x97,0}, + {0x9C,0x9D,0x9E,0x9F,0}, + {0x05,0x06,0x07,0x08,0}, + {0xA4,0xA5,0xA6,0xA7,0}, + {0xAC,0xAD,0xAE,0xAF,0}, + {0xB4,0xB5,0xB6,0xB7,0}, + {0xBC,0xBD,0xBE,0xBF,0}, + {0x25,0x26,0x27,0x28,0}, + {0xC4,0xC5,0xC6,0xC7,0}, + {0xCC,0xCD,0xCE,0xCF,0}, + {0xD4,0xD5,0xD6,0xD7,0}, + {0xDC,0xDD,0xDE,0xDF,0}, + {0x45,0x46,0x47,0x48,0}, + {0xE4,0xE5,0xE6,0xE7,0}, + {0xEC,0xED,0xEE,0xEF,0}, + {0xF4,0xF5,0xF6,0xF7,0}, + {0xFC,0xFD,0xFE,0xFF,0}, + {0x65,0x66,0x67,0x68,0} + } + }; + + int rown = 0; + int rowc = 0; + int rowl = 0; + int rowr = 0; + int rowa = 0; + + //Set Indicator icon + if (host_keyboard_leds() & (1<display, source->display, sizeof(dest->display))) { + memcpy(dest->display, source->display, sizeof(dest->display)); + dest->dirty = true; + } +} + +void iota_gfx_task_user(void) { + struct CharacterMatrix matrix; + matrix_clear(&matrix); + matrix_render_user(&matrix); + matrix_update(&display, &matrix); +} +#endif//SSD1306OLED + +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + switch (keycode) { + case QWERTY: + if (record->event.pressed) { + persistent_default_layer_set(1UL<<_QWERTY); + } + return false; + break; + case LOWER: + if (record->event.pressed) { + layer_on(_LOWER); + } else { + layer_off(_LOWER); + } + return false; + break; + case RAISE: + if (record->event.pressed) { + layer_on(_RAISE); + } else { + layer_off(_RAISE); + } + return false; + break; + case ADJUST: + if (record->event.pressed) { + layer_on(_ADJUST); + } else { + layer_off(_ADJUST); + } + return false; + break; + case RGB_MOD: + #ifdef RGBLIGHT_ENABLE + if (record->event.pressed) { + rgblight_mode(RGB_current_mode); + rgblight_step(); + RGB_current_mode = rgblight_config.mode; + } + #endif + return false; + break; + case RGBRST: + #ifdef RGBLIGHT_ENABLE + if (record->event.pressed) { + eeconfig_update_rgblight_default(); + rgblight_enable(); + RGB_current_mode = rgblight_config.mode; + } + #endif + break; + } + return true; +} + diff --git a/keyboards/yosino58/keymaps/default/rules.mk b/keyboards/yosino58/keymaps/default/rules.mk new file mode 100644 index 00000000000..131f5e1f8a6 --- /dev/null +++ b/keyboards/yosino58/keymaps/default/rules.mk @@ -0,0 +1,30 @@ +# Build Options +# change to "no" to disable the options, or define them in the Makefile in +# the appropriate keymap folder that will get included automatically +# +BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = no # Mouse keys(+4700) +EXTRAKEY_ENABLE = yes # Audio control and System control(+450) +CONSOLE_ENABLE = no # Console for debug(+400) +COMMAND_ENABLE = no # Commands for debug and configuration +NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +MIDI_ENABLE = no # MIDI controls +AUDIO_ENABLE = no # Audio output on port C6 +UNICODE_ENABLE = no # Unicode +BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID +RGBLIGHT_ENABLE = yes # Enable WS2812 RGB underlight. +SWAP_HANDS_ENABLE = no # Enable one-hand typing + +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend + +# If you want to change the display of OLED, you need to change here +SRC += ./lib/glcdfont.c \ + ./lib/logo_reader.c \ + # ./lib/rgb_state_reader.c \ + # ./lib/layer_state_reader.c \ + # ./lib/keylogger.c \ + # ./lib/mode_icon_reader.c \ + # ./lib/host_led_state_reader.c \ + # ./lib/timelogger.c \ diff --git a/keyboards/yosino58/keymaps/sakura/config.h b/keyboards/yosino58/keymaps/sakura/config.h new file mode 100644 index 00000000000..64962b0d20d --- /dev/null +++ b/keyboards/yosino58/keymaps/sakura/config.h @@ -0,0 +1,50 @@ +/* +This is the c configuration file for the keymap + +Copyright 2012 Jun Wako +Copyright 2015 Jack Humbert + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#pragma once + +//#define USE_MATRIX_I2C + +/* Select hand configuration */ + +// #define MASTER_LEFT +#define MASTER_RIGHT +// #define EE_HANDS + +#define SSD1306OLED +#define SSD1306_128X64 + +#define TAPPING_FORCE_HOLD +#define TAPPING_TERM 100 + +#undef RGBLED_NUM +#define RGBLIGHT_ANIMATIONS +#define RGBLED_NUM 29 +#define RGBLIGHT_LIMIT_VAL 120 +#define RGBLIGHT_HUE_STEP 10 +#define RGBLIGHT_SAT_STEP 17 +#define RGBLIGHT_VAL_STEP 17 + +#define MOUSEKEY_DELAY 50 +#define MOUSEKEY_INTERVAL 10 +#define MOUSEKEY_MAX_SPEED 3 +#define MOUSEKEY_TIME_TO_MAX 20 +#define MOUSEKEY_WHEEL_MAX_SPEED 8 +#define MOUSEKEY_WHEEL_TIME_TO_MAX 40 diff --git a/keyboards/yosino58/keymaps/sakura/keymap.c b/keyboards/yosino58/keymaps/sakura/keymap.c new file mode 100644 index 00000000000..0996f0e4e7c --- /dev/null +++ b/keyboards/yosino58/keymaps/sakura/keymap.c @@ -0,0 +1,337 @@ +#include QMK_KEYBOARD_H +#ifdef PROTOCOL_LUFA + #include "lufa.h" + #include "split_util.h" +#endif +#ifdef SSD1306OLED + #include "ssd1306.h" +#endif + +extern keymap_config_t keymap_config; + +#ifdef RGBLIGHT_ENABLE +//Following line allows macro to read current RGB settings +extern rgblight_config_t rgblight_config; +#endif + +extern uint8_t is_master; + +// Each layer gets a name for readability, which is then used in the keymap matrix below. +// The underscores don't mean anything - you can have a layer called STUFF or any other name. +// Layer names don't all need to be of the same length, obviously, and you can also skip them +// entirely and just use numbers. +#define _QWERTY 0 +#define _LOWER 1 +#define _RAISE 2 +#define _ADJUST 3 + +enum custom_keycodes { + QWERTY = SAFE_RANGE, + LOWER, + RAISE, + ADJUST, + RGBRST +}; + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { +/* QWERTY + * ,-----------------------------------------. ,-----------------------------------------. + * | ` | 1 | 2 | 3 | 4 | 5 | | 6 | 7 | 8 | 9 | 0 | - | + * |------+------+------+------+------+------| |------+------+------+------+------+------| + * | Tab | Q | W | E | R | T | | Y | U | I | O | P | = | + * |------+------+------+------+------+------| |------+------+------+------+------+------| + * |LShift| A | S | D | F | G | | H | J | K | L | ; | ' | + * |------+------+------+------+------+------| |------+------+------+------+------+------| + * |LCTRL | Z | X | C | V | B |-------.-------. ,---------------| N | M | , | . | / | \ | + * `-----------------------------------------/ Del / / \ \ Bksp \----------------------------------------' + * | LAlt | LGUI | /-------/ Space / \ Enter \-------\ | [ | ] | + * | | |/ LOWER / / \ \ RAISE \ | | | + * `-----------------------------' '------------------------------' + */ + [_QWERTY] = LAYOUT( \ + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, \ + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_EQL, \ + KC_LSFT, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, \ + KC_LCTRL, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_DEL, KC_SPC, KC_ENT, KC_BSPC, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_BSLS, \ + KC_LALT, KC_LGUI, LOWER, RAISE, KC_LBRC, KC_RBRC\ + ), + +/* LOWER + * ,-----------------------------------------. ,-----------------------------------------. + * | ESC | F1 | F2 | F3 | F4 | F5 | | F6 | F7 | F8 | F9 | F10 | | + * |------+------+------+------+------+------| |------+------+------+------+------+------| + * | Tab | / | - | 7 | 8 | 9 | | PSCR | SLCK | Pause| | | | + * |------+------+------+------+------+------| |------+------+------+------+------+------| + * |LShift| * | + | 4 | 5 | 6 | |Insert| Home |PageUP| | | | + * |------+------+------+------+------+------| |------+------+------+------+------+------| + * |LCTRL | . | 0 | 1 | 2 | 3 |-------.-------. ,---------------| Del | End |PageDN| | Num | Caps | + * `-----------------------------------------/ F11 / / \ \ F12 \----------------------------------------' + * | LAlt | LGUI | /-------/ Space / \ Enter \-------\ | | | + * | | |/ LOWER / / \ \ \ | | | + * `-----------------------------' '------------------------------' + */ + [_LOWER] = LAYOUT( \ + KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, XXXXXXX, \ + _______, KC_PSLS, KC_PMNS, KC_P7, KC_P8, KC_P9, KC_PSCR, KC_SLCK, KC_PAUS, XXXXXXX, KC_UP, XXXXXXX, \ + _______, KC_PAST, KC_PPLS, KC_P4, KC_P5, KC_P6, KC_INS, KC_HOME, KC_PGUP, XXXXXXX, KC_DOWN, KC_RGHT, \ + _______, KC_PDOT, KC_P0, KC_P1, KC_P2, KC_P3, KC_F11, _______, _______, KC_F12, KC_DEL, KC_END, KC_PGDN, KC_LEFT, KC_NLCK, KC_CLCK, \ + _______, _______, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX\ + ), + +/* RAISE + * ,-----------------------------------------. ,-----------------------------------------. + * |RESET | | | | | | | Mute | Vol+ | Play | | | | + * |------+------+------+------+------+------| |------+------+------+------+------+------| + * | | | | | | | | Prev | Vol- | Next | | | | + * |------+------+------+------+------+------| |------+------+------+------+------+------| + * | |MS_Bt1| MS_U |MS_Bt2|MS_WhU|MS_WhL| | | |RGB ON| HUE+ | SAT+ | VAL+ | + * |------+------+------+------+------+------| |------+------+------+------+------+------| + * | | MS_L | MS_D | MS_R |MS_WhD|MS_WhR|-------.-------. ,---------------| | | MODE | HUE- | SAT- | VAL- | + * `-----------------------------------------/ / / \ \ \----------------------------------------' + * | | | /-------/ Space / \ Enter \-------\ | | | + * | | |/ / / \ \ RAISE \ | | | + * `-----------------------------' '------------------------------' + */ + [_RAISE] = LAYOUT( \ + RESET, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_MUTE, KC_VOLU, KC_MPLY, XXXXXXX, XXXXXXX, XXXXXXX, \ + XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_MPRV, KC_VOLD, KC_MNXT, XXXXXXX, XXXXXXX, XXXXXXX, \ + XXXXXXX, KC_BTN1, KC_MS_U, KC_BTN2, KC_WH_U, KC_WH_L, XXXXXXX, XXXXXXX, RGB_TOG, RGB_HUI, RGB_SAI, RGB_VAI, \ + XXXXXXX, KC_MS_L, KC_MS_D, KC_MS_R, KC_WH_D, KC_WH_R, XXXXXXX, _______, _______, XXXXXXX, XXXXXXX, RGBRST, RGB_MOD, RGB_HUD, RGB_SAD, RGB_VAD, \ + XXXXXXX, XXXXXXX, XXXXXXX, _______, XXXXXXX, XXXXXXX \ + ) + +/* ADJUST + * ,-----------------------------------------. ,-----------------------------------------. + * |RESET | | | | | | | | | | | | | + * |------+------+------+------+------+------| |------+------+------+------+------+------| + * | | | | | | | | | | | | | | + * |------+------+------+------+------+------| |------+------+------+------+------+------| + * | | | | | | | | | | | | | | + * |------+------+------+------+------+------| |------+------+------+------+------+------| + * | | | | | | |-------.-------. ,---------------| | | | | | | + * `-----------------------------------------/ / / \ \ \----------------------------------------' + * | | | /-------/ / \ \-------\ | | | + * | | |/ / / \ \ \ | | | + * `-----------------------------' '------------------------------' + + [_ADJUST] = LAYOUT( \ + RESET, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, \ + XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, \ + XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, \ + XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, \ + XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX \ + ) +*/ +}; + + +int RGB_current_mode; + +void persistent_default_layer_set(uint16_t default_layer) { + eeconfig_update_default_layer(default_layer); + default_layer_set(default_layer); +} + +// Setting ADJUST layer RGB back to default +void update_tri_layer_RGB(uint8_t layer1, uint8_t layer2, uint8_t layer3) { + if (IS_LAYER_ON(layer1) && IS_LAYER_ON(layer2)) { + layer_on(layer3); + } else { + layer_off(layer3); + } +} + +void matrix_init_user(void) { + #ifdef RGBLIGHT_ENABLE + RGB_current_mode = rgblight_config.mode; + #endif + //SSD1306 OLED init, make sure to add #define SSD1306OLED in config.h + #ifdef SSD1306OLED + #ifdef SSD1306_128X64 + iota_gfx_init(false); // turns on the display + #else + iota_gfx_init(!has_usb()); // turns on the display + #endif + #endif +} + +//SSD1306 OLED update loop, make sure to add #define SSD1306OLED in config.h +#ifdef SSD1306OLED + +//assign the right code to your layers for OLED display +#define L_QWERTY 0 +#define L_LOWER 2 +#define L_RAISE 4 +#define L_ADJUST 8 + +// When add source files to SRC in rules.mk, you can use functions. +const char *read_logo(void); + +void matrix_scan_user(void) { + iota_gfx_task(); +} + +void matrix_render_user(struct CharacterMatrix *matrix) { + if (is_master) { + static char indctr[2][20][5]= + { + // white icon + { + {0x80,0x81,0x82,0x83,0}, + {0x88,0x89,0x8A,0x8B,0}, + {0x90,0x91,0x92,0x93,0}, + {0x98,0x99,0x9A,0x9B,0}, + {0x01,0x02,0x03,0x04,0}, + {0xA0,0xA1,0xA2,0xA3,0}, + {0xA8,0xA9,0xAA,0xAB,0}, + {0xB0,0xB1,0xB2,0xB3,0}, + {0xB8,0xB9,0xBA,0xBB,0}, + {0x21,0x22,0x23,0x24,0}, + {0xC0,0xC1,0xC2,0xC3,0}, + {0xC8,0xC9,0xCA,0xCB,0}, + {0xD0,0xD1,0xD2,0xD3,0}, + {0xD8,0xD9,0xDA,0xDB,0}, + {0x41,0x42,0x43,0x44,0}, + {0xE0,0xE1,0xE2,0xE3,0}, + {0xE8,0xE9,0xEA,0xEB,0}, + {0xF0,0xF1,0xF2,0xF3,0}, + {0xF8,0xF9,0xFA,0xFB,0}, + {0x61,0x62,0x63,0x64,0} + }, + // Black icon + { + {0x84,0x85,0x86,0x87,0}, + {0x8C,0x8D,0x8E,0x8F,0}, + {0x94,0x95,0x96,0x97,0}, + {0x9C,0x9D,0x9E,0x9F,0}, + {0x05,0x06,0x07,0x08,0}, + {0xA4,0xA5,0xA6,0xA7,0}, + {0xAC,0xAD,0xAE,0xAF,0}, + {0xB4,0xB5,0xB6,0xB7,0}, + {0xBC,0xBD,0xBE,0xBF,0}, + {0x25,0x26,0x27,0x28,0}, + {0xC4,0xC5,0xC6,0xC7,0}, + {0xCC,0xCD,0xCE,0xCF,0}, + {0xD4,0xD5,0xD6,0xD7,0}, + {0xDC,0xDD,0xDE,0xDF,0}, + {0x45,0x46,0x47,0x48,0}, + {0xE4,0xE5,0xE6,0xE7,0}, + {0xEC,0xED,0xEE,0xEF,0}, + {0xF4,0xF5,0xF6,0xF7,0}, + {0xFC,0xFD,0xFE,0xFF,0}, + {0x65,0x66,0x67,0x68,0} + } + }; + + int rown = 0; + int rowc = 0; + int rowl = 0; + int rowr = 0; + int rowa = 0; + + //Set Indicator icon + if (host_keyboard_leds() & (1<display, source->display, sizeof(dest->display))) { + memcpy(dest->display, source->display, sizeof(dest->display)); + dest->dirty = true; + } +} + +void iota_gfx_task_user(void) { + struct CharacterMatrix matrix; + matrix_clear(&matrix); + matrix_render_user(&matrix); + matrix_update(&display, &matrix); +} +#endif//SSD1306OLED + +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + switch (keycode) { + case QWERTY: + if (record->event.pressed) { + persistent_default_layer_set(1UL<<_QWERTY); + } + return false; + break; + case LOWER: + if (record->event.pressed) { + layer_on(_LOWER); + } else { + layer_off(_LOWER); + } + return false; + break; + case RAISE: + if (record->event.pressed) { + layer_on(_RAISE); + } else { + layer_off(_RAISE); + } + return false; + break; + case ADJUST: + if (record->event.pressed) { + layer_on(_ADJUST); + } else { + layer_off(_ADJUST); + } + return false; + break; + case RGB_MOD: + #ifdef RGBLIGHT_ENABLE + if (record->event.pressed) { + rgblight_mode(RGB_current_mode); + rgblight_step(); + RGB_current_mode = rgblight_config.mode; + } + #endif + return false; + break; + case RGBRST: + #ifdef RGBLIGHT_ENABLE + if (record->event.pressed) { + eeconfig_update_rgblight_default(); + rgblight_enable(); + RGB_current_mode = rgblight_config.mode; + } + #endif + break; + } + return true; +} + diff --git a/keyboards/yosino58/keymaps/sakura/rules.mk b/keyboards/yosino58/keymaps/sakura/rules.mk new file mode 100644 index 00000000000..296e53287ae --- /dev/null +++ b/keyboards/yosino58/keymaps/sakura/rules.mk @@ -0,0 +1,30 @@ +# Build Options +# change to "no" to disable the options, or define them in the Makefile in +# the appropriate keymap folder that will get included automatically +# +BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = yes # Mouse keys(+4700) +EXTRAKEY_ENABLE = yes # Audio control and System control(+450) +CONSOLE_ENABLE = no # Console for debug(+400) +COMMAND_ENABLE = no # Commands for debug and configuration +NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +MIDI_ENABLE = no # MIDI controls +AUDIO_ENABLE = no # Audio output on port C6 +UNICODE_ENABLE = no # Unicode +BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID +RGBLIGHT_ENABLE = yes # Enable WS2812 RGB underlight. +SWAP_HANDS_ENABLE = no # Enable one-hand typing + +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend + +# If you want to change the display of OLED, you need to change here +SRC += ./lib/glcdfont.c \ + ./lib/logo_reader.c \ + # ./lib/rgb_state_reader.c \ + # ./lib/layer_state_reader.c \ + # ./lib/keylogger.c \ + # ./lib/mode_icon_reader.c \ + # ./lib/host_led_state_reader.c \ + # ./lib/timelogger.c \ diff --git a/keyboards/yosino58/lib/glcdfont.c b/keyboards/yosino58/lib/glcdfont.c new file mode 100644 index 00000000000..01b656cc626 --- /dev/null +++ b/keyboards/yosino58/lib/glcdfont.c @@ -0,0 +1,275 @@ +// This is the 'classic' fixed-space bitmap font for Adafruit_GFX since 1.0. +// See gfxfont.h for newer custom bitmap font info. + +#ifndef FONT5X7_H +#define FONT5X7_H + +#ifdef __AVR__ + #include + #include +#elif defined(ESP8266) + #include +#else + #define PROGMEM +#endif + +// Standard ASCII 5x7 font +const unsigned char font[] PROGMEM = { + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0xFC, 0x02, 0x01, 0x01, 0x01, 0x01, + 0x01, 0x81, 0xC1, 0xE1, 0xF1, 0xF9, + 0xF9, 0xF9, 0xF9, 0x01, 0x01, 0x01, + 0x01, 0x01, 0x01, 0x01, 0x02, 0xFC, + 0xFC, 0xFE, 0xFF, 0xFF, 0xFF, 0xFF, + 0xFF, 0x7F, 0x3F, 0x1F, 0x0F, 0x07, + 0x07, 0x07, 0x07, 0xFF, 0xFF, 0xFF, + 0xFF, 0xFF, 0xFF, 0xFF, 0xFE, 0xFC, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0xFF, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x03, 0x03, 0x03, 0x01, 0x00, 0xFF, + 0xFF, 0xFF, 0xFF, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0xFF, + 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, + 0xFC, 0xFC, 0xFC, 0xFE, 0xFF, 0x00, + 0x00, 0x00, 0x00, 0xFF, 0xFF, 0xFF, + 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0xFC, 0xFE, 0xFC, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0xFC, + 0xFE, 0x00, 0x00, 0x80, 0xF8, 0xFC, + 0x7C, 0x3E, 0x1E, 0x1E, 0x1E, 0x1E, + 0x1E, 0x3E, 0x7C, 0xFC, 0xF8, 0x80, + 0x00, 0x00, 0xC0, 0xF8, 0x7C, 0x3C, + 0x3C, 0x3C, 0x3C, 0x3C, 0x3C, 0x3C, + 0x3C, 0x3C, 0x18, 0x00, 0x38, 0x7C, + 0x7C, 0x7C, 0x7C, 0x7C, 0xFC, 0xFC, + 0x7C, 0x7C, 0x7C, 0x7C, 0x38, 0x00, + 0x00, 0xC0, 0xF0, 0xF8, 0x7C, 0x3C, + 0x1E, 0x1E, 0x1E, 0x3C, 0x7C, 0xF8, + 0xF0, 0xC0, 0x00, 0x00, 0x80, 0xF8, + 0xFC, 0x7C, 0x3E, 0x1E, 0x1E, 0x1E, + 0x1E, 0x1E, 0x3E, 0x7C, 0xFC, 0xF8, + 0x80, 0x00, 0x00, 0x00, 0xFC, 0xFE, + 0x1E, 0x1E, 0x1E, 0x1E, 0x1E, 0x1E, + 0x1E, 0x1E, 0x1E, 0x1E, 0x1C, 0x00, + 0xE0, 0xF8, 0xFC, 0x3E, 0x1E, 0x1E, + 0x1E, 0x1E, 0x1E, 0x1E, 0x3E, 0xFC, + 0xF8, 0xE0, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0xFF, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0xFF, + 0xFF, 0xFF, 0xFF, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0xFF, + 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, + 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0x00, + 0x00, 0x00, 0x00, 0xFF, 0xFF, 0xFF, + 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x03, 0x0F, 0x1F, 0x3C, 0x3C, + 0x3C, 0x3C, 0x3C, 0x3C, 0x3C, 0xFF, + 0xFF, 0x00, 0x00, 0xFF, 0xFF, 0xFF, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0xFF, 0xFF, 0xFF, + 0x00, 0x00, 0x03, 0x0F, 0x1E, 0x3C, + 0x3C, 0x3C, 0x3C, 0x3C, 0x3C, 0x3C, + 0x7C, 0xF8, 0xC0, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0xFF, 0xFF, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0xFF, 0xFF, 0xFF, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0xFF, + 0xFF, 0xFF, 0x00, 0x00, 0xFF, 0xFF, + 0xFF, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0xFF, 0xFF, + 0xFF, 0x00, 0x00, 0x00, 0x07, 0x0F, + 0x0F, 0x1E, 0x1E, 0x1E, 0x1E, 0x1E, + 0x1E, 0x1E, 0xFE, 0xFC, 0xF0, 0x00, + 0xC0, 0xF7, 0xFF, 0x3F, 0x3E, 0x1C, + 0x1C, 0x1C, 0x1C, 0x3E, 0x3F, 0xFF, + 0xF7, 0xC0, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x3F, 0x40, 0x80, 0x80, 0x80, 0x80, + 0x9C, 0x9E, 0x9E, 0x9E, 0x9E, 0x9F, + 0x9F, 0x9F, 0x9F, 0x9E, 0x9E, 0x9E, + 0x9E, 0x9C, 0x80, 0x80, 0x40, 0x3F, + 0x3F, 0x7F, 0xFF, 0xFF, 0xFF, 0xFF, + 0xE3, 0xE1, 0xE1, 0xE1, 0xE1, 0xE0, + 0xE0, 0xE0, 0xE0, 0xE1, 0xE1, 0xE1, + 0xE1, 0xE3, 0xFF, 0xFF, 0x7F, 0x3F, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x18, 0x3C, 0x3C, 0x3C, 0x3C, + 0x3C, 0x3C, 0x3C, 0x3C, 0x1F, 0x0F, + 0x07, 0x00, 0x00, 0x00, 0x0F, 0x1F, + 0x1F, 0x3E, 0x3C, 0x3C, 0x3C, 0x3C, + 0x3C, 0x3E, 0x1F, 0x1F, 0x0F, 0x00, + 0x00, 0x00, 0x18, 0x3C, 0x3C, 0x3C, + 0x3C, 0x3C, 0x3C, 0x3C, 0x3C, 0x3C, + 0x3E, 0x1F, 0x03, 0x00, 0x1C, 0x3E, + 0x3E, 0x3E, 0x3E, 0x3E, 0x3F, 0x3F, + 0x3E, 0x3E, 0x3E, 0x3E, 0x1C, 0x00, + 0x00, 0x3F, 0x3F, 0x1F, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x1F, + 0x3F, 0x3F, 0x00, 0x00, 0x00, 0x0F, + 0x1F, 0x1F, 0x3E, 0x3C, 0x3C, 0x3C, + 0x3C, 0x3C, 0x3E, 0x1F, 0x1F, 0x0F, + 0x00, 0x00, 0x00, 0x00, 0x06, 0x1F, + 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, + 0x1F, 0x1F, 0x0F, 0x07, 0x03, 0x00, + 0x01, 0x07, 0x0F, 0x1E, 0x3C, 0x3C, + 0x3C, 0x3C, 0x3C, 0x3C, 0x1E, 0x0F, + 0x07, 0x01, 0x00, 0x00, 0x00, 0x00, + 0xFC, 0x02, 0x01, 0x79, 0x79, 0x79, + 0x79, 0xF9, 0xF9, 0xF9, 0x79, 0x79, + 0x79, 0x79, 0x01, 0x01, 0x01, 0x01, + 0x01, 0x01, 0x01, 0x01, 0x02, 0xFC, + 0xFC, 0xFE, 0xFF, 0x87, 0x87, 0x87, + 0x87, 0x07, 0x07, 0x07, 0x87, 0x87, + 0x87, 0x87, 0xFF, 0xFF, 0xFF, 0xFF, + 0xFF, 0xFF, 0xFF, 0xFF, 0xFE, 0xFC, + 0xFC, 0x02, 0x01, 0xE1, 0xE1, 0xE1, + 0xE1, 0xE1, 0xE1, 0xE1, 0xE1, 0xE1, + 0xE1, 0xE1, 0xE1, 0xE1, 0xC1, 0xC1, + 0x81, 0x01, 0x01, 0x01, 0x02, 0xFC, + 0xFC, 0xFE, 0xFF, 0x1F, 0x1F, 0x1F, + 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, + 0x1F, 0x1F, 0x1F, 0x1F, 0x3F, 0x3F, + 0x7F, 0xFF, 0xFF, 0xFF, 0xFE, 0xFC, + 0xFC, 0x02, 0x01, 0x01, 0x01, 0x01, + 0x01, 0x01, 0x01, 0x01, 0x01, 0x09, + 0x89, 0xF9, 0xF9, 0xF9, 0xF9, 0xF9, + 0xF9, 0x09, 0x09, 0x01, 0x02, 0xFC, + 0xFC, 0xFE, 0xFF, 0xFF, 0xFF, 0xFF, + 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xF7, + 0x77, 0x07, 0x07, 0x07, 0x07, 0x07, + 0x07, 0xF7, 0xF7, 0xFF, 0xFE, 0xFC, + 0xFC, 0x02, 0x01, 0x01, 0x01, 0x01, + 0x81, 0xC1, 0xE1, 0xF1, 0xF1, 0xF9, + 0x79, 0x79, 0xF9, 0xF9, 0xF1, 0xF1, + 0xE1, 0x81, 0x01, 0x01, 0x02, 0xFC, + 0xFC, 0xFE, 0xFF, 0xFF, 0xFF, 0xFF, + 0x7F, 0x3F, 0x1F, 0x0F, 0x0F, 0x07, + 0x87, 0x87, 0x07, 0x07, 0x0F, 0x0F, + 0x1F, 0x7F, 0xFF, 0xFF, 0xFE, 0xFC, + 0xFF, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0xFF, 0xFF, 0xFF, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0xFF, + 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, + 0xFF, 0x00, 0x00, 0x00, 0xFF, 0xFF, + 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, + 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, + 0xFF, 0x00, 0x00, 0x00, 0x00, 0xFF, + 0xFF, 0xFF, 0xC0, 0xC0, 0xC0, 0xC0, + 0xC0, 0xC0, 0xC0, 0xC0, 0xE1, 0xFF, + 0x7F, 0x1F, 0x00, 0x00, 0x00, 0xFF, + 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0x00, + 0x00, 0x00, 0x3F, 0x3F, 0x3F, 0x3F, + 0x3F, 0x3F, 0x3F, 0x3F, 0x1E, 0x00, + 0x80, 0xE0, 0xFF, 0xFF, 0xFF, 0xFF, + 0xFF, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0xC0, 0xF0, 0xFC, 0xFC, 0x3F, + 0x0F, 0x03, 0x01, 0x01, 0xFF, 0xFF, + 0xFF, 0xF8, 0x00, 0x00, 0x00, 0xFF, + 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, + 0xFF, 0x3F, 0x0F, 0x03, 0x03, 0xC0, + 0xF0, 0xFC, 0xFE, 0xFE, 0x00, 0x00, + 0x00, 0x07, 0xFF, 0xFF, 0xFF, 0xFF, + 0xFF, 0x00, 0x00, 0xE0, 0xFC, 0xFF, + 0xFF, 0xFF, 0xFF, 0x1F, 0x03, 0x00, + 0x00, 0x00, 0x18, 0x1F, 0x1F, 0x1F, + 0x1F, 0x0F, 0x00, 0x00, 0x00, 0xFF, + 0xFF, 0xFF, 0xFF, 0x1F, 0x03, 0x00, + 0x00, 0x00, 0x00, 0xE0, 0xFC, 0xFF, + 0xFF, 0xFF, 0xE7, 0xE0, 0xE0, 0xE0, + 0xE0, 0xF0, 0xFF, 0xFF, 0xFF, 0xFF, + 0xFF, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0xFF, 0xFF, 0xFF, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x80, 0xC0, 0xE0, 0x00, 0xFF, + 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, + 0xFF, 0x00, 0x00, 0x00, 0xFF, 0xFF, + 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, + 0xFF, 0x7F, 0x3F, 0x1F, 0xFF, 0xFF, + 0xFF, 0x00, 0x00, 0x00, 0x00, 0xFF, + 0xFF, 0xFF, 0x01, 0x01, 0x01, 0x01, + 0x03, 0x0F, 0x3F, 0xFD, 0xF1, 0xC0, + 0x00, 0x00, 0x00, 0x00, 0x00, 0xFF, + 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0x00, + 0x00, 0x00, 0xFE, 0xFE, 0xFE, 0xFE, + 0xFC, 0xF0, 0xC0, 0x02, 0x0F, 0x3F, + 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, + 0xFF, 0x00, 0x00, 0x00, 0xF0, 0xFC, + 0xFF, 0xFF, 0xFF, 0x73, 0x70, 0x70, + 0x70, 0x70, 0x70, 0x70, 0xFF, 0xFF, + 0xFF, 0xFF, 0xF8, 0x00, 0x00, 0xFF, + 0xFF, 0xFF, 0xFF, 0xFF, 0x0F, 0x03, + 0x00, 0x00, 0x00, 0x8C, 0x8F, 0x8F, + 0x8F, 0x8F, 0x8F, 0x8F, 0x00, 0x00, + 0x00, 0x00, 0x07, 0xFF, 0xFF, 0xFF, + 0xFF, 0x00, 0x00, 0x3F, 0xFF, 0xFF, + 0xFF, 0xFF, 0xFF, 0xC0, 0x80, 0x00, + 0x00, 0x80, 0xC0, 0xE0, 0xF8, 0xF0, + 0x20, 0x00, 0x00, 0x00, 0x00, 0xFF, + 0xFF, 0xFF, 0xFF, 0xC0, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x3F, 0x7F, 0xFF, + 0xFF, 0x7F, 0x3F, 0x1F, 0x07, 0x0F, + 0xDF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, + 0x3F, 0x40, 0x80, 0x8F, 0x8F, 0x8F, + 0x8F, 0x8F, 0x8F, 0x8F, 0x8F, 0x8F, + 0x8F, 0x8F, 0x8F, 0x8F, 0x8F, 0x8F, + 0x8F, 0x87, 0x83, 0x81, 0x40, 0x3F, + 0x3F, 0x7F, 0xFF, 0xF0, 0xF0, 0xF0, + 0xF0, 0xF0, 0xF0, 0xF0, 0xF0, 0xF0, + 0xF0, 0xF0, 0xF0, 0xF0, 0xF0, 0xF0, + 0xF0, 0xF8, 0xFC, 0xFE, 0x7F, 0x3F, + 0x3F, 0x40, 0x80, 0x8E, 0x8E, 0x8F, + 0x8F, 0x8F, 0x8E, 0x8E, 0x80, 0x80, + 0x80, 0x80, 0x80, 0x80, 0x83, 0x8F, + 0x8F, 0x8E, 0x8E, 0x80, 0x40, 0x3F, + 0x3F, 0x7F, 0xFF, 0xF1, 0xF1, 0xF0, + 0xF0, 0xF0, 0xF1, 0xF1, 0xFF, 0xFF, + 0xFF, 0xFF, 0xFF, 0xFF, 0xFC, 0xF0, + 0xF0, 0xF1, 0xF1, 0xFF, 0x7F, 0x3F, + 0x3F, 0x40, 0x80, 0x80, 0x9F, 0x9F, + 0x9F, 0x9F, 0x9F, 0x80, 0x80, 0x80, + 0x80, 0x80, 0x80, 0x80, 0x9F, 0x9F, + 0x9F, 0x9F, 0x9F, 0x80, 0x40, 0x3F, + 0x3F, 0x7F, 0xFF, 0xFF, 0xE0, 0xE0, + 0xE0, 0xE0, 0xE0, 0xFF, 0xFF, 0xFF, + 0xFF, 0xFF, 0xFF, 0xFF, 0xE0, 0xE0, + 0xE0, 0xE0, 0xE0, 0xFF, 0x7F, 0x3F, + 0x3F, 0x40, 0x80, 0x80, 0x80, 0x81, + 0x83, 0x87, 0x87, 0x8F, 0x8F, 0x8F, + 0x8F, 0x87, 0x87, 0x83, 0x81, 0x80, + 0x80, 0x80, 0x80, 0x80, 0x40, 0x3F, + 0x3F, 0x7F, 0xFF, 0xFF, 0xFF, 0xFE, + 0xFC, 0xF8, 0xF8, 0xF0, 0xF0, 0xF0, + 0xF0, 0xF8, 0xF8, 0xFC, 0xFE, 0xFF, + 0xFF, 0xFF, 0xFF, 0xFF, 0x7F, 0x3F +}; +#endif // FONT5X7_H diff --git a/keyboards/yosino58/lib/glcdfont_.c b/keyboards/yosino58/lib/glcdfont_.c new file mode 100644 index 00000000000..122b26afa36 --- /dev/null +++ b/keyboards/yosino58/lib/glcdfont_.c @@ -0,0 +1,243 @@ +// This is the 'classic' fixed-space bitmap font for Adafruit_GFX since 1.0. +// See gfxfont.h for newer custom bitmap font info. + +#ifndef FONT5X7_H +#define FONT5X7_H + +#ifdef __AVR__ + #include + #include +#elif defined(ESP8266) + #include +#else + #define PROGMEM +#endif + +// Standard ASCII 5x7 font +const unsigned char font[] PROGMEM = { + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0xFE, 0x01, 0x01, 0x0D, 0xFD, + 0xFD, 0x0D, 0x01, 0x01, 0x01, 0x01, + 0x01, 0x01, 0x01, 0xFE, 0x00, 0x00, + 0x00, 0xFE, 0x01, 0x01, 0x0D, 0xFD, + 0xFD, 0x8D, 0x8D, 0x8D, 0x8D, 0xF9, + 0x71, 0x01, 0x01, 0xFE, 0x00, 0x00, + 0x00, 0xFE, 0x01, 0x01, 0x01, 0xC1, + 0xF1, 0x39, 0x0D, 0x3D, 0xFD, 0xC1, + 0x01, 0x01, 0x01, 0xFE, 0x00, 0x00, + 0x00, 0xFE, 0x01, 0x01, 0x01, 0x01, + 0x21, 0x31, 0xF9, 0xF9, 0x01, 0x01, + 0x01, 0x01, 0x01, 0xFE, 0x00, 0x00, + 0x00, 0x00, 0xC0, 0x80, 0xC0, 0xE0, + 0xF0, 0xF0, 0x00, 0xC0, 0x80, 0x00, + 0x80, 0xC0, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x02, 0x06, 0xEC, 0xD8, 0xB4, + 0x6E, 0xDE, 0x82, 0x7A, 0x76, 0xAC, + 0xD8, 0xF0, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0xB0, 0x70, + 0xBC, 0x7C, 0xBC, 0x7C, 0xBC, 0x70, + 0xB0, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0xF0, 0x90, + 0x9C, 0x84, 0x84, 0x84, 0x9C, 0x90, + 0xF0, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x7F, 0x80, 0x80, 0x98, 0x9F, + 0x9F, 0x98, 0x98, 0x98, 0x98, 0x9C, + 0x9E, 0x80, 0x80, 0x7F, 0x00, 0x00, + 0x00, 0x7F, 0x80, 0x80, 0x98, 0x9F, + 0x9F, 0x99, 0x81, 0x83, 0x87, 0x9C, + 0x98, 0x98, 0x80, 0x7F, 0x00, 0x00, + 0x00, 0x7F, 0x80, 0x80, 0x9F, 0x9F, + 0x86, 0x86, 0x86, 0x86, 0x9F, 0x9F, + 0x80, 0x80, 0x80, 0x7F, 0x00, 0x00, + 0x00, 0x7F, 0x80, 0x80, 0x80, 0x80, + 0x98, 0x98, 0x9F, 0x9F, 0x98, 0x98, + 0x80, 0x80, 0x80, 0x7F, 0x00, 0x00, + 0x00, 0x00, 0x07, 0x03, 0x07, 0x0F, + 0x1F, 0x1F, 0x00, 0x0C, 0x07, 0x03, + 0x07, 0x0C, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x1F, 0x2F, 0x77, + 0xFB, 0xFC, 0x81, 0xBB, 0xD6, 0x6D, + 0x1B, 0x37, 0x60, 0xC0, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x1B, 0x37, + 0x3B, 0x37, 0x3B, 0x37, 0x3B, 0x37, + 0x1B, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x1B, 0x37, + 0x3B, 0x37, 0x3B, 0x37, 0x3B, 0x37, + 0x1B, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0xFE, 0xFF, 0xFF, 0xF3, 0x03, + 0x03, 0xF3, 0xFF, 0xFF, 0xFF, 0xFF, + 0xFF, 0xFF, 0xFF, 0xFE, 0x00, 0x00, + 0x00, 0xFE, 0xFF, 0xFF, 0xF3, 0x03, + 0x03, 0x73, 0x73, 0x73, 0x73, 0x07, + 0x8F, 0xFF, 0xFF, 0xFE, 0x00, 0x00, + 0x00, 0xFE, 0xFF, 0xFF, 0xFF, 0x3F, + 0x0F, 0xC7, 0xF3, 0xC3, 0x03, 0x3F, + 0xFF, 0xFF, 0xFF, 0xFE, 0x00, 0x00, + 0x00, 0xFE, 0xFF, 0xFF, 0xFF, 0xFF, + 0xDF, 0xCF, 0x07, 0x07, 0xFF, 0xFF, + 0xFF, 0xFF, 0xFF, 0xFE, 0x00, 0x00, + 0x00, 0x00, 0xC0, 0x80, 0xC0, 0xE0, + 0xF0, 0xF0, 0x00, 0x20, 0x20, 0x10, + 0x10, 0x08, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0xF0, 0xE8, 0xDC, + 0xBE, 0x7E, 0x02, 0xFA, 0x76, 0xAC, + 0xD8, 0xF0, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0xF0, 0x10, + 0x1C, 0x04, 0x04, 0x04, 0x1C, 0x10, + 0xF0, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x04, 0xF8, 0x30, + 0x5C, 0x84, 0x04, 0x04, 0x1C, 0x10, + 0xF0, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x7F, 0xFF, 0xFF, 0xE7, 0xE0, + 0xE0, 0xE7, 0xE7, 0xE7, 0xE7, 0xE7, + 0xE3, 0xE1, 0xFF, 0x7F, 0x00, 0x00, + 0x00, 0x7F, 0xFF, 0xFF, 0xE7, 0xE0, + 0xE0, 0xE6, 0xFE, 0xFC, 0xF8, 0xE3, + 0xE7, 0xE7, 0xFF, 0x7F, 0x00, 0x00, + 0x00, 0x7F, 0xFF, 0xFF, 0xE0, 0xE0, + 0xF9, 0xF9, 0xF9, 0xF9, 0xE0, 0xE0, + 0xFF, 0xFF, 0xFF, 0x7F, 0x00, 0x00, + 0x00, 0x7F, 0xFF, 0xFF, 0xFF, 0xFF, + 0xE7, 0xE7, 0xE0, 0xE0, 0xE7, 0xE7, + 0xFF, 0xFF, 0xFF, 0x7F, 0x00, 0x00, + 0x00, 0x00, 0x07, 0x03, 0x07, 0x0F, + 0x1F, 0x1F, 0x00, 0x09, 0x09, 0x11, + 0x11, 0x21, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x1F, 0x2F, 0x77, + 0xFB, 0xFD, 0x80, 0xBE, 0xDD, 0x6B, + 0x37, 0x1F, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x1F, 0x38, + 0x38, 0x38, 0x38, 0x38, 0x38, 0x38, + 0x1F, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x1F, 0x20, + 0x20, 0x20, 0x21, 0x22, 0x24, 0x28, + 0x1F, 0x20, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 +}; +#endif // FONT5X7_H diff --git a/keyboards/yosino58/lib/host_led_state_reader.c b/keyboards/yosino58/lib/host_led_state_reader.c new file mode 100644 index 00000000000..2a17e0a33b8 --- /dev/null +++ b/keyboards/yosino58/lib/host_led_state_reader.c @@ -0,0 +1,15 @@ +#include +#include "yosino58.h" + +char host_led_state_str[24]; + +const char *read_host_led_state(void) +{ + uint8_t leds = host_keyboard_leds(); + snprintf(host_led_state_str, sizeof(host_led_state_str), "NL:%s CL:%s SL:%s", + (leds & (1 << USB_LED_NUM_LOCK)) ? "on" : "- ", + (leds & (1 << USB_LED_CAPS_LOCK)) ? "on" : "- ", + (leds & (1 << USB_LED_SCROLL_LOCK)) ? "on" : "- "); + + return host_led_state_str; +} diff --git a/keyboards/yosino58/lib/keylogger.c b/keyboards/yosino58/lib/keylogger.c new file mode 100644 index 00000000000..c50de94c208 --- /dev/null +++ b/keyboards/yosino58/lib/keylogger.c @@ -0,0 +1,45 @@ +#include +#include "yosino58.h" + +char keylog_str[24] = {}; +char keylogs_str[21] = {}; +int keylogs_str_idx = 0; + +const char code_to_name[60] = { + ' ', ' ', ' ', ' ', 'a', 'b', 'c', 'd', 'e', 'f', + 'g', 'h', 'i', 'j', 'k', 'l', 'm', 'n', 'o', 'p', + 'q', 'r', 's', 't', 'u', 'v', 'w', 'x', 'y', 'z', + '1', '2', '3', '4', '5', '6', '7', '8', '9', '0', + 'R', 'E', 'B', 'T', ' ', ' ', ' ', ' ', ' ', ' ', + ' ', ';', '\'', ' ', ',', '.', '/', ' ', ' ', ' '}; + +void set_keylog(uint16_t keycode, keyrecord_t *record) { + char name = ' '; + if (keycode < 60) { + name = code_to_name[keycode]; + } + + // update keylog + snprintf(keylog_str, sizeof(keylog_str), "%dx%d, k%2d : %c", + record->event.key.row, record->event.key.col, + keycode, name); + + // update keylogs + if (keylogs_str_idx == sizeof(keylogs_str) - 1) { + keylogs_str_idx = 0; + for (int i = 0; i < sizeof(keylogs_str) - 1; i++) { + keylogs_str[i] = ' '; + } + } + + keylogs_str[keylogs_str_idx] = name; + keylogs_str_idx++; +} + +const char *read_keylog(void) { + return keylog_str; +} + +const char *read_keylogs(void) { + return keylogs_str; +} diff --git a/keyboards/yosino58/lib/layer_state_reader.c b/keyboards/yosino58/lib/layer_state_reader.c new file mode 100644 index 00000000000..7e5747cb75a --- /dev/null +++ b/keyboards/yosino58/lib/layer_state_reader.c @@ -0,0 +1,35 @@ + +#include QMK_KEYBOARD_H +#include +#include "yosino58.h" + +#define L_BASE 0 +#define L_LOWER 8 +#define L_RAISE 16 +#define L_ADJUST 65536 +#define L_ADJUST_TRI 65560 + +char layer_state_str[24]; + +const char *read_layer_state(void) { + switch (layer_state) + { + case L_BASE: + snprintf(layer_state_str, sizeof(layer_state_str), "Layer: Default"); + break; + case L_RAISE: + snprintf(layer_state_str, sizeof(layer_state_str), "Layer: Raise"); + break; + case L_LOWER: + snprintf(layer_state_str, sizeof(layer_state_str), "Layer: Lower"); + break; + case L_ADJUST: + case L_ADJUST_TRI: + snprintf(layer_state_str, sizeof(layer_state_str), "Layer: Adjust"); + break; + default: + snprintf(layer_state_str, sizeof(layer_state_str), "Layer: Undef-%ld", layer_state); + } + + return layer_state_str; +} diff --git a/keyboards/yosino58/lib/logo_reader.c b/keyboards/yosino58/lib/logo_reader.c new file mode 100644 index 00000000000..96c9b897ef5 --- /dev/null +++ b/keyboards/yosino58/lib/logo_reader.c @@ -0,0 +1,11 @@ +#include "yosino58.h" + +const char *read_logo(void) { + static char logo[] = { + 0x2B,0x2C,0x2D,0x2E,0x2F,0x30,0x31,0x32,0x33,0x34,0x35,0x36,0x37,0x38,0x39,0x3A,0x3B,0x3C,0x3D,0x3E,0x3F, + 0x4B,0x4C,0x4D,0x4E,0x4F,0x50,0x51,0x52,0x53,0x54,0x55,0x56,0x57,0x58,0x59,0x5A,0x5B,0x5C,0x5D,0x5E,0x5F, + 0x6B,0x6C,0x6D,0x6E,0x6F,0x70,0x71,0x72,0x73,0x74,0x75,0x76,0x77,0x78,0x79,0x7A,0x7B,0x7C,0x7D,0x7E,0x7F, + 0}; + + return logo; +} diff --git a/keyboards/yosino58/lib/mode_icon_reader.c b/keyboards/yosino58/lib/mode_icon_reader.c new file mode 100644 index 00000000000..865d9537ded --- /dev/null +++ b/keyboards/yosino58/lib/mode_icon_reader.c @@ -0,0 +1,15 @@ +#include +#include "yosino58.h" + +char mode_icon[24]; + +const char *read_mode_icon(bool swap) { + static char logo[][2][3] = {{{0x95, 0x96, 0}, {0xb5, 0xb6, 0}}, {{0x97, 0x98, 0}, {0xb7, 0xb8, 0}}}; + if (swap == false) { + snprintf(mode_icon, sizeof(mode_icon), "%s\n%s", logo[0][0], logo[0][1]); + } else { + snprintf(mode_icon, sizeof(mode_icon), "%s\n%s", logo[1][0], logo[1][1]); + } + + return mode_icon; +} diff --git a/keyboards/yosino58/lib/rgb_state_reader.c b/keyboards/yosino58/lib/rgb_state_reader.c new file mode 100644 index 00000000000..e0efe2e5288 --- /dev/null +++ b/keyboards/yosino58/lib/rgb_state_reader.c @@ -0,0 +1,15 @@ +#ifdef RGBLIGHT_ENABLE + +#include QMK_KEYBOARD_H +#include + +extern rgblight_config_t rgblight_config; +char rbf_info_str[24]; +const char *read_rgb_info(void) { + + snprintf(rbf_info_str, sizeof(rbf_info_str), "%s %2d h%3d s%3d v%3d", + rgblight_config.enable ? "on" : "- ", rgblight_config.mode, + rgblight_config.hue, rgblight_config.sat, rgblight_config.val); + return rbf_info_str; +} +#endif diff --git a/keyboards/yosino58/lib/timelogger.c b/keyboards/yosino58/lib/timelogger.c new file mode 100644 index 00000000000..ce8b0c270fe --- /dev/null +++ b/keyboards/yosino58/lib/timelogger.c @@ -0,0 +1,16 @@ +#include +#include "yosino58.h" + +char timelog_str[24] = {}; +int last_time = 0; +int elapsed_time = 0; + +void set_timelog(void) { + elapsed_time = timer_elapsed(last_time); + last_time = timer_read(); + snprintf(timelog_str, sizeof(timelog_str), "lt:%5d, et:%5d", last_time, elapsed_time); +} + +const char *read_timelog(void) { + return timelog_str; +} diff --git a/keyboards/yosino58/pro_micro.h b/keyboards/yosino58/pro_micro.h new file mode 100644 index 00000000000..36663337271 --- /dev/null +++ b/keyboards/yosino58/pro_micro.h @@ -0,0 +1,358 @@ +/* + pins_arduino.h - Pin definition functions for Arduino + Part of Arduino - http://www.arduino.cc/ + + Copyright (c) 2007 David A. Mellis + + This library is free software; you can redistribute it and/or + modify it under the terms of the GNU Lesser General Public + License as published by the Free Software Foundation; either + version 2.1 of the License, or (at your option) any later version. + + This library is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + Lesser General Public License for more details. + + You should have received a copy of the GNU Lesser General + Public License along with this library; if not, write to the + Free Software Foundation, Inc., 59 Temple Place, Suite 330, + Boston, MA 02111-1307 USA + + $Id: wiring.h 249 2007-02-03 16:52:51Z mellis $ +*/ +#pragma once + +#include + +// Workaround for wrong definitions in "iom32u4.h". +// This should be fixed in the AVR toolchain. +#undef UHCON +#undef UHINT +#undef UHIEN +#undef UHADDR +#undef UHFNUM +#undef UHFNUML +#undef UHFNUMH +#undef UHFLEN +#undef UPINRQX +#undef UPINTX +#undef UPNUM +#undef UPRST +#undef UPCONX +#undef UPCFG0X +#undef UPCFG1X +#undef UPSTAX +#undef UPCFG2X +#undef UPIENX +#undef UPDATX +#undef TCCR2A +#undef WGM20 +#undef WGM21 +#undef COM2B0 +#undef COM2B1 +#undef COM2A0 +#undef COM2A1 +#undef TCCR2B +#undef CS20 +#undef CS21 +#undef CS22 +#undef WGM22 +#undef FOC2B +#undef FOC2A +#undef TCNT2 +#undef TCNT2_0 +#undef TCNT2_1 +#undef TCNT2_2 +#undef TCNT2_3 +#undef TCNT2_4 +#undef TCNT2_5 +#undef TCNT2_6 +#undef TCNT2_7 +#undef OCR2A +#undef OCR2_0 +#undef OCR2_1 +#undef OCR2_2 +#undef OCR2_3 +#undef OCR2_4 +#undef OCR2_5 +#undef OCR2_6 +#undef OCR2_7 +#undef OCR2B +#undef OCR2_0 +#undef OCR2_1 +#undef OCR2_2 +#undef OCR2_3 +#undef OCR2_4 +#undef OCR2_5 +#undef OCR2_6 +#undef OCR2_7 + +#define NUM_DIGITAL_PINS 30 +#define NUM_ANALOG_INPUTS 12 + +#define TX_RX_LED_INIT DDRD |= (1<<5), DDRB |= (1<<0) +#define TXLED0 PORTD |= (1<<5) +#define TXLED1 PORTD &= ~(1<<5) +#define RXLED0 PORTB |= (1<<0) +#define RXLED1 PORTB &= ~(1<<0) + +static const uint8_t SDA = 2; +static const uint8_t SCL = 3; +#define LED_BUILTIN 13 + +// Map SPI port to 'new' pins D14..D17 +static const uint8_t SS = 17; +static const uint8_t MOSI = 16; +static const uint8_t MISO = 14; +static const uint8_t SCK = 15; + +// Mapping of analog pins as digital I/O +// A6-A11 share with digital pins +static const uint8_t ADC0 = 18; +static const uint8_t ADC1 = 19; +static const uint8_t ADC2 = 20; +static const uint8_t ADC3 = 21; +static const uint8_t ADC4 = 22; +static const uint8_t ADC5 = 23; +static const uint8_t ADC6 = 24; // D4 +static const uint8_t ADC7 = 25; // D6 +static const uint8_t ADC8 = 26; // D8 +static const uint8_t ADC9 = 27; // D9 +static const uint8_t ADC10 = 28; // D10 +static const uint8_t ADC11 = 29; // D12 + +#define digitalPinToPCICR(p) ((((p) >= 8 && (p) <= 11) || ((p) >= 14 && (p) <= 17) || ((p) >= A8 && (p) <= A10)) ? (&PCICR) : ((uint8_t *)0)) +#define digitalPinToPCICRbit(p) 0 +#define digitalPinToPCMSK(p) ((((p) >= 8 && (p) <= 11) || ((p) >= 14 && (p) <= 17) || ((p) >= A8 && (p) <= A10)) ? (&PCMSK0) : ((uint8_t *)0)) +#define digitalPinToPCMSKbit(p) ( ((p) >= 8 && (p) <= 11) ? (p) - 4 : ((p) == 14 ? 3 : ((p) == 15 ? 1 : ((p) == 16 ? 2 : ((p) == 17 ? 0 : (p - A8 + 4)))))) + +// __AVR_ATmega32U4__ has an unusual mapping of pins to channels +extern const uint8_t PROGMEM analog_pin_to_channel_PGM[]; +#define analogPinToChannel(P) ( pgm_read_byte( analog_pin_to_channel_PGM + (P) ) ) + +#define digitalPinToInterrupt(p) ((p) == 0 ? 2 : ((p) == 1 ? 3 : ((p) == 2 ? 1 : ((p) == 3 ? 0 : ((p) == 7 ? 4 : NOT_AN_INTERRUPT))))) + +#ifdef ARDUINO_MAIN + +// On the Arduino board, digital pins are also used +// for the analog output (software PWM). Analog input +// pins are a separate set. + +// ATMEL ATMEGA32U4 / ARDUINO LEONARDO +// +// D0 PD2 RXD1/INT2 +// D1 PD3 TXD1/INT3 +// D2 PD1 SDA SDA/INT1 +// D3# PD0 PWM8/SCL OC0B/SCL/INT0 +// D4 A6 PD4 ADC8 +// D5# PC6 ??? OC3A/#OC4A +// D6# A7 PD7 FastPWM #OC4D/ADC10 +// D7 PE6 INT6/AIN0 +// +// D8 A8 PB4 ADC11/PCINT4 +// D9# A9 PB5 PWM16 OC1A/#OC4B/ADC12/PCINT5 +// D10# A10 PB6 PWM16 OC1B/0c4B/ADC13/PCINT6 +// D11# PB7 PWM8/16 0C0A/OC1C/#RTS/PCINT7 +// D12 A11 PD6 T1/#OC4D/ADC9 +// D13# PC7 PWM10 CLK0/OC4A +// +// A0 D18 PF7 ADC7 +// A1 D19 PF6 ADC6 +// A2 D20 PF5 ADC5 +// A3 D21 PF4 ADC4 +// A4 D22 PF1 ADC1 +// A5 D23 PF0 ADC0 +// +// New pins D14..D17 to map SPI port to digital pins +// +// MISO D14 PB3 MISO,PCINT3 +// SCK D15 PB1 SCK,PCINT1 +// MOSI D16 PB2 MOSI,PCINT2 +// SS D17 PB0 RXLED,SS/PCINT0 +// +// Connected LEDs on board for TX and RX +// TXLED D24 PD5 XCK1 +// RXLED D17 PB0 +// HWB PE2 HWB + +// these arrays map port names (e.g. port B) to the +// appropriate addresses for various functions (e.g. reading +// and writing) +const uint16_t PROGMEM port_to_mode_PGM[] = { + NOT_A_PORT, + NOT_A_PORT, + (uint16_t) &DDRB, + (uint16_t) &DDRC, + (uint16_t) &DDRD, + (uint16_t) &DDRE, + (uint16_t) &DDRF, +}; + +const uint16_t PROGMEM port_to_output_PGM[] = { + NOT_A_PORT, + NOT_A_PORT, + (uint16_t) &PORTB, + (uint16_t) &PORTC, + (uint16_t) &PORTD, + (uint16_t) &PORTE, + (uint16_t) &PORTF, +}; + +const uint16_t PROGMEM port_to_input_PGM[] = { + NOT_A_PORT, + NOT_A_PORT, + (uint16_t) &PINB, + (uint16_t) &PINC, + (uint16_t) &PIND, + (uint16_t) &PINE, + (uint16_t) &PINF, +}; + +const uint8_t PROGMEM digital_pin_to_port_PGM[] = { + PD, // D0 - PD2 + PD, // D1 - PD3 + PD, // D2 - PD1 + PD, // D3 - PD0 + PD, // D4 - PD4 + PC, // D5 - PC6 + PD, // D6 - PD7 + PE, // D7 - PE6 + + PB, // D8 - PB4 + PB, // D9 - PB5 + PB, // D10 - PB6 + PB, // D11 - PB7 + PD, // D12 - PD6 + PC, // D13 - PC7 + + PB, // D14 - MISO - PB3 + PB, // D15 - SCK - PB1 + PB, // D16 - MOSI - PB2 + PB, // D17 - SS - PB0 + + PF, // D18 - A0 - PF7 + PF, // D19 - A1 - PF6 + PF, // D20 - A2 - PF5 + PF, // D21 - A3 - PF4 + PF, // D22 - A4 - PF1 + PF, // D23 - A5 - PF0 + + PD, // D24 - PD5 + PD, // D25 / D6 - A7 - PD7 + PB, // D26 / D8 - A8 - PB4 + PB, // D27 / D9 - A9 - PB5 + PB, // D28 / D10 - A10 - PB6 + PD, // D29 / D12 - A11 - PD6 +}; + +const uint8_t PROGMEM digital_pin_to_bit_mask_PGM[] = { + _BV(2), // D0 - PD2 + _BV(3), // D1 - PD3 + _BV(1), // D2 - PD1 + _BV(0), // D3 - PD0 + _BV(4), // D4 - PD4 + _BV(6), // D5 - PC6 + _BV(7), // D6 - PD7 + _BV(6), // D7 - PE6 + + _BV(4), // D8 - PB4 + _BV(5), // D9 - PB5 + _BV(6), // D10 - PB6 + _BV(7), // D11 - PB7 + _BV(6), // D12 - PD6 + _BV(7), // D13 - PC7 + + _BV(3), // D14 - MISO - PB3 + _BV(1), // D15 - SCK - PB1 + _BV(2), // D16 - MOSI - PB2 + _BV(0), // D17 - SS - PB0 + + _BV(7), // D18 - A0 - PF7 + _BV(6), // D19 - A1 - PF6 + _BV(5), // D20 - A2 - PF5 + _BV(4), // D21 - A3 - PF4 + _BV(1), // D22 - A4 - PF1 + _BV(0), // D23 - A5 - PF0 + + _BV(5), // D24 - PD5 + _BV(7), // D25 / D6 - A7 - PD7 + _BV(4), // D26 / D8 - A8 - PB4 + _BV(5), // D27 / D9 - A9 - PB5 + _BV(6), // D28 / D10 - A10 - PB6 + _BV(6), // D29 / D12 - A11 - PD6 +}; + +const uint8_t PROGMEM digital_pin_to_timer_PGM[] = { + NOT_ON_TIMER, + NOT_ON_TIMER, + NOT_ON_TIMER, + TIMER0B, /* 3 */ + NOT_ON_TIMER, + TIMER3A, /* 5 */ + TIMER4D, /* 6 */ + NOT_ON_TIMER, + + NOT_ON_TIMER, + TIMER1A, /* 9 */ + TIMER1B, /* 10 */ + TIMER0A, /* 11 */ + + NOT_ON_TIMER, + TIMER4A, /* 13 */ + + NOT_ON_TIMER, + NOT_ON_TIMER, + NOT_ON_TIMER, + NOT_ON_TIMER, + NOT_ON_TIMER, + NOT_ON_TIMER, + + NOT_ON_TIMER, + NOT_ON_TIMER, + NOT_ON_TIMER, + NOT_ON_TIMER, + NOT_ON_TIMER, + NOT_ON_TIMER, + NOT_ON_TIMER, + NOT_ON_TIMER, + NOT_ON_TIMER, + NOT_ON_TIMER, +}; + +const uint8_t PROGMEM analog_pin_to_channel_PGM[] = { + 7, // A0 PF7 ADC7 + 6, // A1 PF6 ADC6 + 5, // A2 PF5 ADC5 + 4, // A3 PF4 ADC4 + 1, // A4 PF1 ADC1 + 0, // A5 PF0 ADC0 + 8, // A6 D4 PD4 ADC8 + 10, // A7 D6 PD7 ADC10 + 11, // A8 D8 PB4 ADC11 + 12, // A9 D9 PB5 ADC12 + 13, // A10 D10 PB6 ADC13 + 9 // A11 D12 PD6 ADC9 +}; + +#endif /* ARDUINO_MAIN */ + +// These serial port names are intended to allow libraries and architecture-neutral +// sketches to automatically default to the correct port name for a particular type +// of use. For example, a GPS module would normally connect to SERIAL_PORT_HARDWARE_OPEN, +// the first hardware serial port whose RX/TX pins are not dedicated to another use. +// +// SERIAL_PORT_MONITOR Port which normally prints to the Arduino Serial Monitor +// +// SERIAL_PORT_USBVIRTUAL Port which is USB virtual serial +// +// SERIAL_PORT_LINUXBRIDGE Port which connects to a Linux system via Bridge library +// +// SERIAL_PORT_HARDWARE Hardware serial port, physical RX & TX pins. +// +// SERIAL_PORT_HARDWARE_OPEN Hardware serial ports which are open for use. Their RX & TX +// pins are NOT connected to anything by default. +#define SERIAL_PORT_MONITOR Serial +#define SERIAL_PORT_USBVIRTUAL Serial +#define SERIAL_PORT_HARDWARE Serial1 +#define SERIAL_PORT_HARDWARE_OPEN Serial1 diff --git a/keyboards/yosino58/rev1/config.h b/keyboards/yosino58/rev1/config.h new file mode 100644 index 00000000000..a9f4f666ec6 --- /dev/null +++ b/keyboards/yosino58/rev1/config.h @@ -0,0 +1,72 @@ +/* +Copyright 2012 Jun Wako +Copyright 2015 Jack Humbert + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#pragma once + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0x0F6A +#define PRODUCT_ID 0x01B8 +#define DEVICE_VER 0x0001 +#define MANUFACTURER sakuranbo0046 +#define PRODUCT yosino58 +#define DESCRIPTION yosino58 is 6~4+5keys column-staggered split keyboard. + +/* key matrix size */ +// Rows are doubled-up +#define MATRIX_ROWS 10 +#define MATRIX_COLS 6 + +// wiring of each half +#define MATRIX_ROW_PINS { D4, C6, D7, E6, B4 } +#define MATRIX_COL_PINS { F4, F5, F6, F7, B1, B3 } + +/* define if matrix has ghost */ +//#define MATRIX_HAS_GHOST + +/* number of backlight levels */ +// #define BACKLIGHT_LEVELS 3 + +/* Set 0 if debouncing isn't needed */ +#define DEBOUNCING_DELAY 5 + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +//#define LOCKING_SUPPORT_ENABLE +/* Locking resynchronize hack */ +//#define LOCKING_RESYNC_ENABLE + +/* ws2812 RGB LED */ +#define RGB_DI_PIN D3 +#define RGBLED_NUM 12 // Number of LEDs + +/* + * Feature disable options + * These options are also useful to firmware size reduction. + */ + +/* disable debug print */ +// #define NO_DEBUG + +/* disable print */ +// #define NO_PRINT + +/* disable action features */ +//#define NO_ACTION_LAYER +//#define NO_ACTION_TAPPING +//#define NO_ACTION_ONESHOT +//#define NO_ACTION_MACRO +//#define NO_ACTION_FUNCTION diff --git a/keyboards/yosino58/rev1/matrix.c b/keyboards/yosino58/rev1/matrix.c new file mode 100644 index 00000000000..718cc574481 --- /dev/null +++ b/keyboards/yosino58/rev1/matrix.c @@ -0,0 +1,357 @@ +/* +Copyright 2012 Jun Wako + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +/* + * scan matrix + */ +#include +#include +#include +#include +#include +#include +#include +#include "print.h" +#include "debug.h" +#include "util.h" +#include "matrix.h" +#include "split_util.h" +#include "pro_micro.h" + +#ifdef USE_MATRIX_I2C +# include "i2c.h" +#else // USE_SERIAL +# include "split_scomm.h" +#endif + +#ifndef DEBOUNCE +# define DEBOUNCE 5 +#endif + +#define ERROR_DISCONNECT_COUNT 5 + +static uint8_t debouncing = DEBOUNCE; +static const int ROWS_PER_HAND = MATRIX_ROWS/2; +static uint8_t error_count = 0; +uint8_t is_master = 0 ; + +static const uint8_t row_pins[MATRIX_ROWS] = MATRIX_ROW_PINS; +static const uint8_t col_pins[MATRIX_COLS] = MATRIX_COL_PINS; + +/* matrix state(1:on, 0:off) */ +static matrix_row_t matrix[MATRIX_ROWS]; +static matrix_row_t matrix_debouncing[MATRIX_ROWS]; + +static matrix_row_t read_cols(void); +static void init_cols(void); +static void unselect_rows(void); +static void select_row(uint8_t row); +static uint8_t matrix_master_scan(void); + + +__attribute__ ((weak)) +void matrix_init_kb(void) { + matrix_init_user(); +} + +__attribute__ ((weak)) +void matrix_scan_kb(void) { + matrix_scan_user(); +} + +__attribute__ ((weak)) +void matrix_init_user(void) { +} + +__attribute__ ((weak)) +void matrix_scan_user(void) { +} + +inline +uint8_t matrix_rows(void) +{ + return MATRIX_ROWS; +} + +inline +uint8_t matrix_cols(void) +{ + return MATRIX_COLS; +} + +void matrix_init(void) +{ + debug_enable = true; + debug_matrix = true; + debug_mouse = true; + // initialize row and col + unselect_rows(); + init_cols(); + + TX_RX_LED_INIT; + TXLED0; + RXLED0; + + // initialize matrix state: all keys off + for (uint8_t i=0; i < MATRIX_ROWS; i++) { + matrix[i] = 0; + matrix_debouncing[i] = 0; + } + + is_master = has_usb(); + + matrix_init_quantum(); +} + +uint8_t _matrix_scan(void) +{ + // Right hand is stored after the left in the matirx so, we need to offset it + int offset = isLeftHand ? 0 : (ROWS_PER_HAND); + + for (uint8_t i = 0; i < ROWS_PER_HAND; i++) { + select_row(i); + _delay_us(30); // without this wait read unstable value. + matrix_row_t cols = read_cols(); + if (matrix_debouncing[i+offset] != cols) { + matrix_debouncing[i+offset] = cols; + debouncing = DEBOUNCE; + } + unselect_rows(); + } + + if (debouncing) { + if (--debouncing) { + _delay_ms(1); + } else { + for (uint8_t i = 0; i < ROWS_PER_HAND; i++) { + matrix[i+offset] = matrix_debouncing[i+offset]; + } + } + } + + return 1; +} + +#ifdef USE_MATRIX_I2C + +// Get rows from other half over i2c +int i2c_transaction(void) { + int slaveOffset = (isLeftHand) ? (ROWS_PER_HAND) : 0; + + int err = i2c_master_start(SLAVE_I2C_ADDRESS + I2C_WRITE); + if (err) goto i2c_error; + + // start of matrix stored at 0x00 + err = i2c_master_write(0x00); + if (err) goto i2c_error; + + // Start read + err = i2c_master_start(SLAVE_I2C_ADDRESS + I2C_READ); + if (err) goto i2c_error; + + if (!err) { + int i; + for (i = 0; i < ROWS_PER_HAND-1; ++i) { + matrix[slaveOffset+i] = i2c_master_read(I2C_ACK); + } + matrix[slaveOffset+i] = i2c_master_read(I2C_NACK); + i2c_master_stop(); + } else { +i2c_error: // the cable is disconnceted, or something else went wrong + i2c_reset_state(); + return err; + } + + return 0; +} + +#else // USE_SERIAL + +int serial_transaction(int master_changed) { + int slaveOffset = (isLeftHand) ? (ROWS_PER_HAND) : 0; +#ifdef SERIAL_USE_MULTI_TRANSACTION + int ret=serial_update_buffers(master_changed); +#else + int ret=serial_update_buffers(); +#endif + if (ret ) { + if(ret==2) RXLED1; + return 1; + } + RXLED0; + memcpy(&matrix[slaveOffset], + (void *)serial_slave_buffer, SERIAL_SLAVE_BUFFER_LENGTH); + return 0; +} +#endif + +uint8_t matrix_scan(void) +{ + if (is_master) { + matrix_master_scan(); + }else{ + matrix_slave_scan(); + int offset = (isLeftHand) ? ROWS_PER_HAND : 0; + memcpy(&matrix[offset], + (void *)serial_master_buffer, SERIAL_MASTER_BUFFER_LENGTH); + matrix_scan_quantum(); + } + return 1; +} + + +uint8_t matrix_master_scan(void) { + + int ret = _matrix_scan(); + int mchanged = 1; + + int offset = (isLeftHand) ? 0 : ROWS_PER_HAND; + +#ifdef USE_MATRIX_I2C +// for (int i = 0; i < ROWS_PER_HAND; ++i) { + /* i2c_slave_buffer[i] = matrix[offset+i]; */ +// i2c_slave_buffer[i] = matrix[offset+i]; +// } +#else // USE_SERIAL + #ifdef SERIAL_USE_MULTI_TRANSACTION + mchanged = memcmp((void *)serial_master_buffer, + &matrix[offset], SERIAL_MASTER_BUFFER_LENGTH); + #endif + memcpy((void *)serial_master_buffer, + &matrix[offset], SERIAL_MASTER_BUFFER_LENGTH); +#endif + +#ifdef USE_MATRIX_I2C + if( i2c_transaction() ) { +#else // USE_SERIAL + if( serial_transaction(mchanged) ) { +#endif + // turn on the indicator led when halves are disconnected + TXLED1; + + error_count++; + + if (error_count > ERROR_DISCONNECT_COUNT) { + // reset other half if disconnected + int slaveOffset = (isLeftHand) ? (ROWS_PER_HAND) : 0; + for (int i = 0; i < ROWS_PER_HAND; ++i) { + matrix[slaveOffset+i] = 0; + } + } + } else { + // turn off the indicator led on no error + TXLED0; + error_count = 0; + } + matrix_scan_quantum(); + return ret; +} + +void matrix_slave_scan(void) { + _matrix_scan(); + + int offset = (isLeftHand) ? 0 : ROWS_PER_HAND; + +#ifdef USE_MATRIX_I2C + for (int i = 0; i < ROWS_PER_HAND; ++i) { + /* i2c_slave_buffer[i] = matrix[offset+i]; */ + i2c_slave_buffer[i] = matrix[offset+i]; + } +#else // USE_SERIAL + #ifdef SERIAL_USE_MULTI_TRANSACTION + int change = 0; + #endif + for (int i = 0; i < ROWS_PER_HAND; ++i) { + #ifdef SERIAL_USE_MULTI_TRANSACTION + if( serial_slave_buffer[i] != matrix[offset+i] ) + change = 1; + #endif + serial_slave_buffer[i] = matrix[offset+i]; + } + #ifdef SERIAL_USE_MULTI_TRANSACTION + slave_buffer_change_count += change; + #endif +#endif +} + +bool matrix_is_modified(void) +{ + if (debouncing) return false; + return true; +} + +inline +bool matrix_is_on(uint8_t row, uint8_t col) +{ + return (matrix[row] & ((matrix_row_t)1<> 4) + 1) &= ~_BV(col_pins[x] & 0xF); + _SFR_IO8((col_pins[x] >> 4) + 2) |= _BV(col_pins[x] & 0xF); + } +} + +static matrix_row_t read_cols(void) +{ + matrix_row_t result = 0; + for(int x = 0; x < MATRIX_COLS; x++) { + result |= (_SFR_IO8(col_pins[x] >> 4) & _BV(col_pins[x] & 0xF)) ? 0 : (1 << x); + } + return result; +} + +static void unselect_rows(void) +{ + for(int x = 0; x < ROWS_PER_HAND; x++) { + _SFR_IO8((row_pins[x] >> 4) + 1) &= ~_BV(row_pins[x] & 0xF); + _SFR_IO8((row_pins[x] >> 4) + 2) |= _BV(row_pins[x] & 0xF); + } +} + +static void select_row(uint8_t row) +{ + _SFR_IO8((row_pins[row] >> 4) + 1) |= _BV(row_pins[row] & 0xF); + _SFR_IO8((row_pins[row] >> 4) + 2) &= ~_BV(row_pins[row] & 0xF); +} diff --git a/keyboards/yosino58/rev1/rev1.c b/keyboards/yosino58/rev1/rev1.c new file mode 100644 index 00000000000..ef1f13e4133 --- /dev/null +++ b/keyboards/yosino58/rev1/rev1.c @@ -0,0 +1,8 @@ +#include "yosino58.h" + +#ifdef SSD1306OLED +void led_set_kb(uint8_t usb_led) { + // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here + //led_set_user(usb_led); +} +#endif diff --git a/keyboards/yosino58/rev1/rev1.h b/keyboards/yosino58/rev1/rev1.h new file mode 100644 index 00000000000..84d90737d53 --- /dev/null +++ b/keyboards/yosino58/rev1/rev1.h @@ -0,0 +1,40 @@ +#pragma once + +#include "../yosino58.h" + +//void promicro_bootloader_jmp(bool program); +#include "quantum.h" + +#ifdef RGBLIGHT_ENABLE +//rgb led driver +#include "ws2812.h" +#endif + +#ifdef USE_I2C +#include +#ifdef __AVR__ + #include + #include +#endif +#endif + +//void promicro_bootloader_jmp(bool program); +#define LAYOUT( \ + L00, L01, L02, L03, L04, L05, R00, R01, R02, R03, R04, R05, \ + L10, L11, L12, L13, L14, L15, R10, R11, R12, R13, R14, R15, \ + L20, L21, L22, L23, L24, L25, R20, R21, R22, R23, R24, R25, \ + L30, L31, L32, L33, L34, L35, LT4, LT5, RT5, RT4, R30, R31, R32, R33, R34, R35, \ + LT1, LT2, LT3, RT3, RT2, RT1 \ + ) \ + { \ + { L00, L01, L02, L03, L04, L05 }, \ + { L10, L11, L12, L13, L14, L15 }, \ + { L20, L21, L22, L23, L24, L25 }, \ + { L30, L31, L32, L33, L34, L35 }, \ + { KC_NO, LT1, LT2, LT3, LT4, LT5 }, \ + { R05, R04, R03, R02, R01, R00 }, \ + { R15, R14, R13, R12, R11, R10 }, \ + { R25, R24, R23, R22, R21, R20 }, \ + { R35, R34, R33, R32, R31, R30 }, \ + { KC_NO, RT1,RT2, RT3, RT4, RT5 }, \ + } diff --git a/keyboards/yosino58/rev1/rules.mk b/keyboards/yosino58/rev1/rules.mk new file mode 100644 index 00000000000..6028b5a5b95 --- /dev/null +++ b/keyboards/yosino58/rev1/rules.mk @@ -0,0 +1,3 @@ +SRC += rev1/matrix.c +SRC += rev1/split_util.c +SRC += rev1/split_scomm.c diff --git a/keyboards/yosino58/rev1/serial_config.h b/keyboards/yosino58/rev1/serial_config.h new file mode 100644 index 00000000000..4fab8e8ddfc --- /dev/null +++ b/keyboards/yosino58/rev1/serial_config.h @@ -0,0 +1,4 @@ +#ifndef SOFT_SERIAL_PIN +#define SOFT_SERIAL_PIN D2 +#define SERIAL_USE_MULTI_TRANSACTION +#endif diff --git a/keyboards/yosino58/rev1/serial_config_simpleapi.h b/keyboards/yosino58/rev1/serial_config_simpleapi.h new file mode 100644 index 00000000000..0e1dd9e4acb --- /dev/null +++ b/keyboards/yosino58/rev1/serial_config_simpleapi.h @@ -0,0 +1,5 @@ +#pragma once + +#undef SERIAL_USE_MULTI_TRANSACTION +#define SERIAL_SLAVE_BUFFER_LENGTH MATRIX_ROWS/2 +#define SERIAL_MASTER_BUFFER_LENGTH MATRIX_ROWS/2 diff --git a/keyboards/yosino58/rev1/split_scomm.c b/keyboards/yosino58/rev1/split_scomm.c new file mode 100644 index 00000000000..a1fe6ba5b82 --- /dev/null +++ b/keyboards/yosino58/rev1/split_scomm.c @@ -0,0 +1,91 @@ +#ifdef USE_SERIAL +#ifdef SERIAL_USE_MULTI_TRANSACTION +/* --- USE flexible API (using multi-type transaction function) --- */ + +#include +#include +#include +#include +#include "serial.h" +#ifdef CONSOLE_ENABLE + #include +#endif + +uint8_t volatile serial_slave_buffer[SERIAL_SLAVE_BUFFER_LENGTH] = {0}; +uint8_t volatile serial_master_buffer[SERIAL_MASTER_BUFFER_LENGTH] = {0}; +uint8_t volatile status_com = 0; +uint8_t volatile status1 = 0; +uint8_t slave_buffer_change_count = 0; +uint8_t s_change_old = 0xff; +uint8_t s_change_new = 0xff; + +SSTD_t transactions[] = { +#define GET_SLAVE_STATUS 0 + /* master buffer not changed, only recive slave_buffer_change_count */ + { (uint8_t *)&status_com, + 0, NULL, + sizeof(slave_buffer_change_count), &slave_buffer_change_count, + }, +#define PUT_MASTER_GET_SLAVE_STATUS 1 + /* master buffer changed need send, and recive slave_buffer_change_count */ + { (uint8_t *)&status_com, + sizeof(serial_master_buffer), (uint8_t *)serial_master_buffer, + sizeof(slave_buffer_change_count), &slave_buffer_change_count, + }, +#define GET_SLAVE_BUFFER 2 + /* recive serial_slave_buffer */ + { (uint8_t *)&status1, + 0, NULL, + sizeof(serial_slave_buffer), (uint8_t *)serial_slave_buffer + } +}; + +void serial_master_init(void) +{ + soft_serial_initiator_init(transactions, TID_LIMIT(transactions)); +} + +void serial_slave_init(void) +{ + soft_serial_target_init(transactions, TID_LIMIT(transactions)); +} + +// 0 => no error +// 1 => slave did not respond +// 2 => checksum error +int serial_update_buffers(int master_update) +{ + int status, smatstatus; + static int need_retry = 0; + + if( s_change_old != s_change_new ) { + smatstatus = soft_serial_transaction(GET_SLAVE_BUFFER); + if( smatstatus == TRANSACTION_END ) { + s_change_old = s_change_new; +#ifdef CONSOLE_ENABLE + uprintf("slave matrix = %b %b %b %b\n", + serial_slave_buffer[0], serial_slave_buffer[1], + serial_slave_buffer[2], serial_slave_buffer[3]); +#endif + } + } else { + // serial_slave_buffer dosen't change + smatstatus = TRANSACTION_END; // dummy status + } + + if( !master_update && !need_retry) { + status = soft_serial_transaction(GET_SLAVE_STATUS); + } else { + status = soft_serial_transaction(PUT_MASTER_GET_SLAVE_STATUS); + } + if( status == TRANSACTION_END ) { + s_change_new = slave_buffer_change_count; + need_retry = 0; + } else { + need_retry = 1; + } + return smatstatus; +} + +#endif // SERIAL_USE_MULTI_TRANSACTION +#endif /* USE_SERIAL */ diff --git a/keyboards/yosino58/rev1/split_scomm.h b/keyboards/yosino58/rev1/split_scomm.h new file mode 100644 index 00000000000..873d8939d81 --- /dev/null +++ b/keyboards/yosino58/rev1/split_scomm.h @@ -0,0 +1,24 @@ +#ifndef SPLIT_COMM_H +#define SPLIT_COMM_H + +#ifndef SERIAL_USE_MULTI_TRANSACTION +/* --- USE Simple API (OLD API, compatible with let's split serial.c) --- */ +#include "serial.h" + +#else +/* --- USE flexible API (using multi-type transaction function) --- */ +// Buffers for master - slave communication +#define SERIAL_SLAVE_BUFFER_LENGTH MATRIX_ROWS/2 +#define SERIAL_MASTER_BUFFER_LENGTH MATRIX_ROWS/2 + +extern volatile uint8_t serial_slave_buffer[SERIAL_SLAVE_BUFFER_LENGTH]; +extern volatile uint8_t serial_master_buffer[SERIAL_MASTER_BUFFER_LENGTH]; +extern uint8_t slave_buffer_change_count; + +void serial_master_init(void); +void serial_slave_init(void); +int serial_update_buffers(int master_changed); + +#endif + +#endif /* SPLIT_COMM_H */ diff --git a/keyboards/yosino58/rev1/split_util.c b/keyboards/yosino58/rev1/split_util.c new file mode 100644 index 00000000000..e1ff8b4379d --- /dev/null +++ b/keyboards/yosino58/rev1/split_util.c @@ -0,0 +1,70 @@ +#include +#include +#include +#include +#include +#include +#include "split_util.h" +#include "matrix.h" +#include "keyboard.h" + +#ifdef USE_MATRIX_I2C +# include "i2c.h" +#else +# include "split_scomm.h" +#endif + +volatile bool isLeftHand = true; + +static void setup_handedness(void) { + #ifdef EE_HANDS + isLeftHand = eeprom_read_byte(EECONFIG_HANDEDNESS); + #else + // I2C_MASTER_RIGHT is deprecated, use MASTER_RIGHT instead, since this works for both serial and i2c + #if defined(I2C_MASTER_RIGHT) || defined(MASTER_RIGHT) + isLeftHand = !has_usb(); + #else + isLeftHand = has_usb(); + #endif + #endif +} + +static void keyboard_master_setup(void) { + +#ifdef USE_MATRIX_I2C + i2c_master_init(); +#else + serial_master_init(); +#endif +} + +static void keyboard_slave_setup(void) { + +#ifdef USE_MATRIX_I2C + i2c_slave_init(SLAVE_I2C_ADDRESS); +#else + serial_slave_init(); +#endif +} + +bool has_usb(void) { + USBCON |= (1 << OTGPADE); //enables VBUS pad + _delay_us(5); + return (USBSTA & (1< +#include "eeconfig.h" + +#define SLAVE_I2C_ADDRESS 0x32 + +extern volatile bool isLeftHand; + +// slave version of matix scan, defined in matrix.c +void matrix_slave_scan(void); + +void split_keyboard_setup(void); +bool has_usb(void); + +void matrix_master_OLED_init (void); + +#endif diff --git a/keyboards/yosino58/rules.mk b/keyboards/yosino58/rules.mk new file mode 100644 index 00000000000..f2934454d99 --- /dev/null +++ b/keyboards/yosino58/rules.mk @@ -0,0 +1,76 @@ +SRC += i2c.c +SRC += serial.c +SRC += ssd1306.c + +# if firmware size over limit, try this option +# CFLAGS += -flto + +# MCU name +#MCU = at90usb1287 +MCU = atmega32u4 + +# Processor frequency. +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to +# calculate timings. Do NOT tack on a 'UL' at the end, this will be done +# automatically to create a 32-bit value in your source code. +# +# This will be an integer division of F_USB below, as it is sourced by +# F_USB after it has run through any CPU prescalers. Note that this value +# does not *change* the processor frequency - it should merely be updated to +# reflect the processor speed set externally so that the code can use accurate +# software delays. +F_CPU = 16000000 + +# +# LUFA specific +# +# Target architecture (see library "Board Types" documentation). +ARCH = AVR8 + +# Input clock frequency. +# This will define a symbol, F_USB, in all source code files equal to the +# input clock frequency (before any prescaling is performed) in Hz. This value may +# differ from F_CPU if prescaling is used on the latter, and is required as the +# raw input clock is fed directly to the PLL sections of the AVR for high speed +# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' +# at the end, this will be done automatically to create a 32-bit value in your +# source code. +# +# If no clock division is performed on the input clock inside the AVR (via the +# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. +F_USB = $(F_CPU) + +# Bootloader +# This definition is optional, and if your keyboard supports multiple bootloaders of +# different sizes, comment this out, and the correct address will be loaded +# automatically (+60). See bootloader.mk for all options. +BOOTLOADER = caterina + +# Interrupt driven control endpoint task(+60) +OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT + +# Build Options +# change to "no" to disable the options, or define them in the Makefile in +# the appropriate keymap folder that will get included automatically +# +BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = no # Mouse keys(+4700) +EXTRAKEY_ENABLE = no # Audio control and System control(+450) +CONSOLE_ENABLE = no # Console for debug(+400) +COMMAND_ENABLE = no # Commands for debug and configuration +NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +MIDI_ENABLE = no # MIDI controls +AUDIO_ENABLE = no # Audio output on port C6 +UNICODE_ENABLE = no # Unicode +BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID +RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. +SUBPROJECT_rev1 = no +USE_I2C = yes +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend + +CUSTOM_MATRIX = yes + +DEFAULT_FOLDER = yosino58/rev1 diff --git a/keyboards/yosino58/serial.c b/keyboards/yosino58/serial.c new file mode 100644 index 00000000000..325c29a3f70 --- /dev/null +++ b/keyboards/yosino58/serial.c @@ -0,0 +1,590 @@ +/* + * WARNING: be careful changing this code, it is very timing dependent + * + * 2018-10-28 checked + * avr-gcc 4.9.2 + * avr-gcc 5.4.0 + * avr-gcc 7.3.0 + */ + +#ifndef F_CPU +#define F_CPU 16000000 +#endif + +#include +#include +#include +#include +#include +#include "serial.h" +//#include + +#ifdef SOFT_SERIAL_PIN + +#ifdef __AVR_ATmega32U4__ + // if using ATmega32U4 I2C, can not use PD0 and PD1 in soft serial. + #ifdef USE_I2C + #if SOFT_SERIAL_PIN == D0 || SOFT_SERIAL_PIN == D1 + #error Using ATmega32U4 I2C, so can not use PD0, PD1 + #endif + #endif + + #if SOFT_SERIAL_PIN >= D0 && SOFT_SERIAL_PIN <= D3 + #define SERIAL_PIN_DDR DDRD + #define SERIAL_PIN_PORT PORTD + #define SERIAL_PIN_INPUT PIND + #if SOFT_SERIAL_PIN == D0 + #define SERIAL_PIN_MASK _BV(PD0) + #define EIMSK_BIT _BV(INT0) + #define EICRx_BIT (~(_BV(ISC00) | _BV(ISC01))) + #define SERIAL_PIN_INTERRUPT INT0_vect + #elif SOFT_SERIAL_PIN == D1 + #define SERIAL_PIN_MASK _BV(PD1) + #define EIMSK_BIT _BV(INT1) + #define EICRx_BIT (~(_BV(ISC10) | _BV(ISC11))) + #define SERIAL_PIN_INTERRUPT INT1_vect + #elif SOFT_SERIAL_PIN == D2 + #define SERIAL_PIN_MASK _BV(PD2) + #define EIMSK_BIT _BV(INT2) + #define EICRx_BIT (~(_BV(ISC20) | _BV(ISC21))) + #define SERIAL_PIN_INTERRUPT INT2_vect + #elif SOFT_SERIAL_PIN == D3 + #define SERIAL_PIN_MASK _BV(PD3) + #define EIMSK_BIT _BV(INT3) + #define EICRx_BIT (~(_BV(ISC30) | _BV(ISC31))) + #define SERIAL_PIN_INTERRUPT INT3_vect + #endif + #elif SOFT_SERIAL_PIN == E6 + #define SERIAL_PIN_DDR DDRE + #define SERIAL_PIN_PORT PORTE + #define SERIAL_PIN_INPUT PINE + #define SERIAL_PIN_MASK _BV(PE6) + #define EIMSK_BIT _BV(INT6) + #define EICRx_BIT (~(_BV(ISC60) | _BV(ISC61))) + #define SERIAL_PIN_INTERRUPT INT6_vect + #else + #error invalid SOFT_SERIAL_PIN value + #endif + +#else + #error serial.c now support ATmega32U4 only +#endif + +//////////////// for backward compatibility //////////////////////////////// +#ifndef SERIAL_USE_MULTI_TRANSACTION +/* --- USE Simple API (OLD API, compatible with let's split serial.c) */ + #if SERIAL_SLAVE_BUFFER_LENGTH > 0 + uint8_t volatile serial_slave_buffer[SERIAL_SLAVE_BUFFER_LENGTH] = {0}; + #endif + #if SERIAL_MASTER_BUFFER_LENGTH > 0 + uint8_t volatile serial_master_buffer[SERIAL_MASTER_BUFFER_LENGTH] = {0}; + #endif + uint8_t volatile status0 = 0; + +SSTD_t transactions[] = { + { (uint8_t *)&status0, + #if SERIAL_MASTER_BUFFER_LENGTH > 0 + sizeof(serial_master_buffer), (uint8_t *)serial_master_buffer, + #else + 0, (uint8_t *)NULL, + #endif + #if SERIAL_SLAVE_BUFFER_LENGTH > 0 + sizeof(serial_slave_buffer), (uint8_t *)serial_slave_buffer + #else + 0, (uint8_t *)NULL, + #endif + } +}; + +void serial_master_init(void) +{ soft_serial_initiator_init(transactions, TID_LIMIT(transactions)); } + +void serial_slave_init(void) +{ soft_serial_target_init(transactions, TID_LIMIT(transactions)); } + +// 0 => no error +// 1 => slave did not respond +// 2 => checksum error +int serial_update_buffers() +{ + int result; + result = soft_serial_transaction(); + return result; +} + +#endif // end of Simple API (OLD API, compatible with let's split serial.c) +//////////////////////////////////////////////////////////////////////////// + +#define ALWAYS_INLINE __attribute__((always_inline)) +#define NO_INLINE __attribute__((noinline)) +#define _delay_sub_us(x) __builtin_avr_delay_cycles(x) + +// parity check +#define ODD_PARITY 1 +#define EVEN_PARITY 0 +#define PARITY EVEN_PARITY + +#ifdef SERIAL_DELAY + // custom setup in config.h + // #define TID_SEND_ADJUST 2 + // #define SERIAL_DELAY 6 // micro sec + // #define READ_WRITE_START_ADJUST 30 // cycles + // #define READ_WRITE_WIDTH_ADJUST 8 // cycles +#else +// ============ Standard setups ============ + +#ifndef SELECT_SOFT_SERIAL_SPEED +#define SELECT_SOFT_SERIAL_SPEED 1 +// 0: about 189kbps +// 1: about 137kbps (default) +// 2: about 75kbps +// 3: about 39kbps +// 4: about 26kbps +// 5: about 20kbps +#endif + +#if __GNUC__ < 6 + #define TID_SEND_ADJUST 14 +#else + #define TID_SEND_ADJUST 2 +#endif + +#if SELECT_SOFT_SERIAL_SPEED == 0 + // Very High speed + #define SERIAL_DELAY 4 // micro sec + #if __GNUC__ < 6 + #define READ_WRITE_START_ADJUST 33 // cycles + #define READ_WRITE_WIDTH_ADJUST 3 // cycles + #else + #define READ_WRITE_START_ADJUST 34 // cycles + #define READ_WRITE_WIDTH_ADJUST 7 // cycles + #endif +#elif SELECT_SOFT_SERIAL_SPEED == 1 + // High speed + #define SERIAL_DELAY 6 // micro sec + #if __GNUC__ < 6 + #define READ_WRITE_START_ADJUST 30 // cycles + #define READ_WRITE_WIDTH_ADJUST 3 // cycles + #else + #define READ_WRITE_START_ADJUST 33 // cycles + #define READ_WRITE_WIDTH_ADJUST 7 // cycles + #endif +#elif SELECT_SOFT_SERIAL_SPEED == 2 + // Middle speed + #define SERIAL_DELAY 12 // micro sec + #define READ_WRITE_START_ADJUST 30 // cycles + #if __GNUC__ < 6 + #define READ_WRITE_WIDTH_ADJUST 3 // cycles + #else + #define READ_WRITE_WIDTH_ADJUST 7 // cycles + #endif +#elif SELECT_SOFT_SERIAL_SPEED == 3 + // Low speed + #define SERIAL_DELAY 24 // micro sec + #define READ_WRITE_START_ADJUST 30 // cycles + #if __GNUC__ < 6 + #define READ_WRITE_WIDTH_ADJUST 3 // cycles + #else + #define READ_WRITE_WIDTH_ADJUST 7 // cycles + #endif +#elif SELECT_SOFT_SERIAL_SPEED == 4 + // Very Low speed + #define SERIAL_DELAY 36 // micro sec + #define READ_WRITE_START_ADJUST 30 // cycles + #if __GNUC__ < 6 + #define READ_WRITE_WIDTH_ADJUST 3 // cycles + #else + #define READ_WRITE_WIDTH_ADJUST 7 // cycles + #endif +#elif SELECT_SOFT_SERIAL_SPEED == 5 + // Ultra Low speed + #define SERIAL_DELAY 48 // micro sec + #define READ_WRITE_START_ADJUST 30 // cycles + #if __GNUC__ < 6 + #define READ_WRITE_WIDTH_ADJUST 3 // cycles + #else + #define READ_WRITE_WIDTH_ADJUST 7 // cycles + #endif +#else +#error invalid SELECT_SOFT_SERIAL_SPEED value +#endif /* SELECT_SOFT_SERIAL_SPEED */ +#endif /* SERIAL_DELAY */ + +#define SERIAL_DELAY_HALF1 (SERIAL_DELAY/2) +#define SERIAL_DELAY_HALF2 (SERIAL_DELAY - SERIAL_DELAY/2) + +#define SLAVE_INT_WIDTH_US 1 +#ifndef SERIAL_USE_MULTI_TRANSACTION + #define SLAVE_INT_RESPONSE_TIME SERIAL_DELAY +#else + #define SLAVE_INT_ACK_WIDTH_UNIT 2 + #define SLAVE_INT_ACK_WIDTH 4 +#endif + +static SSTD_t *Transaction_table = NULL; +static uint8_t Transaction_table_size = 0; + +inline static void serial_delay(void) ALWAYS_INLINE; +inline static +void serial_delay(void) { + _delay_us(SERIAL_DELAY); +} + +inline static void serial_delay_half1(void) ALWAYS_INLINE; +inline static +void serial_delay_half1(void) { + _delay_us(SERIAL_DELAY_HALF1); +} + +inline static void serial_delay_half2(void) ALWAYS_INLINE; +inline static +void serial_delay_half2(void) { + _delay_us(SERIAL_DELAY_HALF2); +} + +inline static void serial_output(void) ALWAYS_INLINE; +inline static +void serial_output(void) { + SERIAL_PIN_DDR |= SERIAL_PIN_MASK; +} + +// make the serial pin an input with pull-up resistor +inline static void serial_input_with_pullup(void) ALWAYS_INLINE; +inline static +void serial_input_with_pullup(void) { + SERIAL_PIN_DDR &= ~SERIAL_PIN_MASK; + SERIAL_PIN_PORT |= SERIAL_PIN_MASK; +} + +inline static uint8_t serial_read_pin(void) ALWAYS_INLINE; +inline static +uint8_t serial_read_pin(void) { + return !!(SERIAL_PIN_INPUT & SERIAL_PIN_MASK); +} + +inline static void serial_low(void) ALWAYS_INLINE; +inline static +void serial_low(void) { + SERIAL_PIN_PORT &= ~SERIAL_PIN_MASK; +} + +inline static void serial_high(void) ALWAYS_INLINE; +inline static +void serial_high(void) { + SERIAL_PIN_PORT |= SERIAL_PIN_MASK; +} + +void soft_serial_initiator_init(SSTD_t *sstd_table, int sstd_table_size) +{ + Transaction_table = sstd_table; + Transaction_table_size = (uint8_t)sstd_table_size; + serial_output(); + serial_high(); +} + +void soft_serial_target_init(SSTD_t *sstd_table, int sstd_table_size) +{ + Transaction_table = sstd_table; + Transaction_table_size = (uint8_t)sstd_table_size; + serial_input_with_pullup(); + + // Enable INT0-INT3,INT6 + EIMSK |= EIMSK_BIT; +#if SERIAL_PIN_MASK == _BV(PE6) + // Trigger on falling edge of INT6 + EICRB &= EICRx_BIT; +#else + // Trigger on falling edge of INT0-INT3 + EICRA &= EICRx_BIT; +#endif +} + +// Used by the sender to synchronize timing with the reciver. +static void sync_recv(void) NO_INLINE; +static +void sync_recv(void) { + for (uint8_t i = 0; i < SERIAL_DELAY*5 && serial_read_pin(); i++ ) { + } + // This shouldn't hang if the target disconnects because the + // serial line will float to high if the target does disconnect. + while (!serial_read_pin()); +} + +// Used by the reciver to send a synchronization signal to the sender. +static void sync_send(void) NO_INLINE; +static +void sync_send(void) { + serial_low(); + serial_delay(); + serial_high(); +} + +// Reads a byte from the serial line +static uint8_t serial_read_chunk(uint8_t *pterrcount, uint8_t bit) NO_INLINE; +static uint8_t serial_read_chunk(uint8_t *pterrcount, uint8_t bit) { + uint8_t byte, i, p, pb; + + _delay_sub_us(READ_WRITE_START_ADJUST); + for( i = 0, byte = 0, p = PARITY; i < bit; i++ ) { + serial_delay_half1(); // read the middle of pulses + if( serial_read_pin() ) { + byte = (byte << 1) | 1; p ^= 1; + } else { + byte = (byte << 1) | 0; p ^= 0; + } + _delay_sub_us(READ_WRITE_WIDTH_ADJUST); + serial_delay_half2(); + } + /* recive parity bit */ + serial_delay_half1(); // read the middle of pulses + pb = serial_read_pin(); + _delay_sub_us(READ_WRITE_WIDTH_ADJUST); + serial_delay_half2(); + + *pterrcount += (p != pb)? 1 : 0; + + return byte; +} + +// Sends a byte with MSB ordering +void serial_write_chunk(uint8_t data, uint8_t bit) NO_INLINE; +void serial_write_chunk(uint8_t data, uint8_t bit) { + uint8_t b, p; + for( p = PARITY, b = 1<<(bit-1); b ; b >>= 1) { + if(data & b) { + serial_high(); p ^= 1; + } else { + serial_low(); p ^= 0; + } + serial_delay(); + } + /* send parity bit */ + if(p & 1) { serial_high(); } + else { serial_low(); } + serial_delay(); + + serial_low(); // sync_send() / senc_recv() need raise edge +} + +static void serial_send_packet(uint8_t *buffer, uint8_t size) NO_INLINE; +static +void serial_send_packet(uint8_t *buffer, uint8_t size) { + for (uint8_t i = 0; i < size; ++i) { + uint8_t data; + data = buffer[i]; + sync_send(); + serial_write_chunk(data,8); + } +} + +static uint8_t serial_recive_packet(uint8_t *buffer, uint8_t size) NO_INLINE; +static +uint8_t serial_recive_packet(uint8_t *buffer, uint8_t size) { + uint8_t pecount = 0; + for (uint8_t i = 0; i < size; ++i) { + uint8_t data; + sync_recv(); + data = serial_read_chunk(&pecount, 8); + buffer[i] = data; + } + return pecount == 0; +} + +inline static +void change_sender2reciver(void) { + sync_send(); //0 + serial_delay_half1(); //1 + serial_low(); //2 + serial_input_with_pullup(); //2 + serial_delay_half1(); //3 +} + +inline static +void change_reciver2sender(void) { + sync_recv(); //0 + serial_delay(); //1 + serial_low(); //3 + serial_output(); //3 + serial_delay_half1(); //4 +} + +static inline uint8_t nibble_bits_count(uint8_t bits) +{ + bits = (bits & 0x5) + (bits >> 1 & 0x5); + bits = (bits & 0x3) + (bits >> 2 & 0x3); + return bits; +} + +// interrupt handle to be used by the target device +ISR(SERIAL_PIN_INTERRUPT) { + +#ifndef SERIAL_USE_MULTI_TRANSACTION + serial_low(); + serial_output(); + SSTD_t *trans = Transaction_table; +#else + // recive transaction table index + uint8_t tid, bits; + uint8_t pecount = 0; + sync_recv(); + bits = serial_read_chunk(&pecount,7); + tid = bits>>3; + bits = (bits&7) != nibble_bits_count(tid); + if( bits || pecount> 0 || tid > Transaction_table_size ) { + return; + } + serial_delay_half1(); + + serial_high(); // response step1 low->high + serial_output(); + _delay_sub_us(SLAVE_INT_ACK_WIDTH_UNIT*SLAVE_INT_ACK_WIDTH); + SSTD_t *trans = &Transaction_table[tid]; + serial_low(); // response step2 ack high->low +#endif + + // target send phase + if( trans->target2initiator_buffer_size > 0 ) + serial_send_packet((uint8_t *)trans->target2initiator_buffer, + trans->target2initiator_buffer_size); + // target switch to input + change_sender2reciver(); + + // target recive phase + if( trans->initiator2target_buffer_size > 0 ) { + if (serial_recive_packet((uint8_t *)trans->initiator2target_buffer, + trans->initiator2target_buffer_size) ) { + *trans->status = TRANSACTION_ACCEPTED; + } else { + *trans->status = TRANSACTION_DATA_ERROR; + } + } else { + *trans->status = TRANSACTION_ACCEPTED; + } + + sync_recv(); //weit initiator output to high +} + +///////// +// start transaction by initiator +// +// int soft_serial_transaction(int sstd_index) +// +// Returns: +// TRANSACTION_END +// TRANSACTION_NO_RESPONSE +// TRANSACTION_DATA_ERROR +// this code is very time dependent, so we need to disable interrupts +#ifndef SERIAL_USE_MULTI_TRANSACTION +int soft_serial_transaction(void) { + SSTD_t *trans = Transaction_table; +#else +int soft_serial_transaction(int sstd_index) { + if( sstd_index > Transaction_table_size ) + return TRANSACTION_TYPE_ERROR; + SSTD_t *trans = &Transaction_table[sstd_index]; +#endif + cli(); + + // signal to the target that we want to start a transaction + serial_output(); + serial_low(); + _delay_us(SLAVE_INT_WIDTH_US); + +#ifndef SERIAL_USE_MULTI_TRANSACTION + // wait for the target response + serial_input_with_pullup(); + _delay_us(SLAVE_INT_RESPONSE_TIME); + + // check if the target is present + if (serial_read_pin()) { + // target failed to pull the line low, assume not present + serial_output(); + serial_high(); + *trans->status = TRANSACTION_NO_RESPONSE; + sei(); + return TRANSACTION_NO_RESPONSE; + } + +#else + // send transaction table index + int tid = (sstd_index<<3) | (7 & nibble_bits_count(sstd_index)); + sync_send(); + _delay_sub_us(TID_SEND_ADJUST); + serial_write_chunk(tid, 7); + serial_delay_half1(); + + // wait for the target response (step1 low->high) + serial_input_with_pullup(); + while( !serial_read_pin() ) { + _delay_sub_us(2); + } + + // check if the target is present (step2 high->low) + for( int i = 0; serial_read_pin(); i++ ) { + if (i > SLAVE_INT_ACK_WIDTH + 1) { + // slave failed to pull the line low, assume not present + serial_output(); + serial_high(); + *trans->status = TRANSACTION_NO_RESPONSE; + sei(); + return TRANSACTION_NO_RESPONSE; + } + _delay_sub_us(SLAVE_INT_ACK_WIDTH_UNIT); + } +#endif + + // initiator recive phase + // if the target is present syncronize with it + if( trans->target2initiator_buffer_size > 0 ) { + if (!serial_recive_packet((uint8_t *)trans->target2initiator_buffer, + trans->target2initiator_buffer_size) ) { + serial_output(); + serial_high(); + *trans->status = TRANSACTION_DATA_ERROR; + sei(); + return TRANSACTION_DATA_ERROR; + } + } + + // initiator switch to output + change_reciver2sender(); + + // initiator send phase + if( trans->initiator2target_buffer_size > 0 ) { + serial_send_packet((uint8_t *)trans->initiator2target_buffer, + trans->initiator2target_buffer_size); + } + + // always, release the line when not in use + sync_send(); + + *trans->status = TRANSACTION_END; + sei(); + return TRANSACTION_END; +} + +#ifdef SERIAL_USE_MULTI_TRANSACTION +int soft_serial_get_and_clean_status(int sstd_index) { + SSTD_t *trans = &Transaction_table[sstd_index]; + cli(); + int retval = *trans->status; + *trans->status = 0;; + sei(); + return retval; +} +#endif + +#endif + +// Helix serial.c history +// 2018-1-29 fork from let's split and add PD2, modify sync_recv() (#2308, bceffdefc) +// 2018-6-28 bug fix master to slave comm and speed up (#3255, 1038bbef4) +// (adjusted with avr-gcc 4.9.2) +// 2018-7-13 remove USE_SERIAL_PD2 macro (#3374, f30d6dd78) +// (adjusted with avr-gcc 4.9.2) +// 2018-8-11 add support multi-type transaction (#3608, feb5e4aae) +// (adjusted with avr-gcc 4.9.2) +// 2018-10-21 fix serial and RGB animation conflict (#4191, 4665e4fff) +// (adjusted with avr-gcc 7.3.0) +// 2018-10-28 re-adjust compiler depend value of delay (#4269, 8517f8a66) +// (adjusted with avr-gcc 5.4.0, 7.3.0) diff --git a/keyboards/yosino58/serial.h b/keyboards/yosino58/serial.h new file mode 100644 index 00000000000..7e0c0847a43 --- /dev/null +++ b/keyboards/yosino58/serial.h @@ -0,0 +1,84 @@ +#ifndef SOFT_SERIAL_H +#define SOFT_SERIAL_H + +#include + +// ///////////////////////////////////////////////////////////////// +// Need Soft Serial defines in config.h +// ///////////////////////////////////////////////////////////////// +// ex. +// #define SOFT_SERIAL_PIN ?? // ?? = D0,D1,D2,D3,E6 +// OPTIONAL: #define SELECT_SOFT_SERIAL_SPEED ? // ? = 1,2,3,4,5 +// // 1: about 137kbps (default) +// // 2: about 75kbps +// // 3: about 39kbps +// // 4: about 26kbps +// // 5: about 20kbps +// +// //// USE Simple API (OLD API, compatible with let's split serial.c) +// ex. +// #define SERIAL_SLAVE_BUFFER_LENGTH MATRIX_ROWS/2 +// #define SERIAL_MASTER_BUFFER_LENGTH 1 +// +// //// USE flexible API (using multi-type transaction function) +// #define SERIAL_USE_MULTI_TRANSACTION +// +// ///////////////////////////////////////////////////////////////// + + +#ifndef SERIAL_USE_MULTI_TRANSACTION +/* --- USE Simple API (OLD API, compatible with let's split serial.c) */ +#if SERIAL_SLAVE_BUFFER_LENGTH > 0 +extern volatile uint8_t serial_slave_buffer[SERIAL_SLAVE_BUFFER_LENGTH]; +#endif +#if SERIAL_MASTER_BUFFER_LENGTH > 0 +extern volatile uint8_t serial_master_buffer[SERIAL_MASTER_BUFFER_LENGTH]; +#endif + +void serial_master_init(void); +void serial_slave_init(void); +int serial_update_buffers(void); + +#endif // USE Simple API + +// Soft Serial Transaction Descriptor +typedef struct _SSTD_t { + uint8_t *status; + uint8_t initiator2target_buffer_size; + uint8_t *initiator2target_buffer; + uint8_t target2initiator_buffer_size; + uint8_t *target2initiator_buffer; +} SSTD_t; +#define TID_LIMIT( table ) (sizeof(table) / sizeof(SSTD_t)) + +// initiator is transaction start side +void soft_serial_initiator_init(SSTD_t *sstd_table, int sstd_table_size); +// target is interrupt accept side +void soft_serial_target_init(SSTD_t *sstd_table, int sstd_table_size); + +// initiator resullt +#define TRANSACTION_END 0 +#define TRANSACTION_NO_RESPONSE 0x1 +#define TRANSACTION_DATA_ERROR 0x2 +#define TRANSACTION_TYPE_ERROR 0x4 +#ifndef SERIAL_USE_MULTI_TRANSACTION +int soft_serial_transaction(void); +#else +int soft_serial_transaction(int sstd_index); +#endif + +// target status +// *SSTD_t.status has +// initiator: +// TRANSACTION_END +// or TRANSACTION_NO_RESPONSE +// or TRANSACTION_DATA_ERROR +// target: +// TRANSACTION_DATA_ERROR +// or TRANSACTION_ACCEPTED +#define TRANSACTION_ACCEPTED 0x8 +#ifdef SERIAL_USE_MULTI_TRANSACTION +int soft_serial_get_and_clean_status(int sstd_index); +#endif + +#endif /* SOFT_SERIAL_H */ diff --git a/keyboards/yosino58/ssd1306.c b/keyboards/yosino58/ssd1306.c new file mode 100644 index 00000000000..70b7301b385 --- /dev/null +++ b/keyboards/yosino58/ssd1306.c @@ -0,0 +1,348 @@ +#ifdef SSD1306OLED + +#include "ssd1306.h" +#include "i2c.h" +#include +#include "print.h" +#ifdef ADAFRUIT_BLE_ENABLE +#include "adafruit_ble.h" +#endif +#ifdef PROTOCOL_LUFA +#include "lufa.h" +#endif +#include "sendchar.h" +#include "timer.h" + +static const unsigned char font[] PROGMEM; + +// Set this to 1 to help diagnose early startup problems +// when testing power-on with ble. Turn it off otherwise, +// as the latency of printing most of the debug info messes +// with the matrix scan, causing keys to drop. +#define DEBUG_TO_SCREEN 0 + +//static uint16_t last_battery_update; +//static uint32_t vbat; +//#define BatteryUpdateInterval 10000 /* milliseconds */ + +// 'last_flush' is declared as uint16_t, +// so this must be less than 65535 +#define ScreenOffInterval 30000 /* milliseconds */ +#if DEBUG_TO_SCREEN +static uint8_t displaying; +#endif +static uint16_t last_flush; + +static bool force_dirty = true; + +// Write command sequence. +// Returns true on success. +static inline bool _send_cmd1(uint8_t cmd) { + bool res = false; + + if (i2c_start_write(SSD1306_ADDRESS)) { + xprintf("failed to start write to %d\n", SSD1306_ADDRESS); + goto done; + } + + if (i2c_master_write(0x0 /* command byte follows */)) { + print("failed to write control byte\n"); + + goto done; + } + + if (i2c_master_write(cmd)) { + xprintf("failed to write command %d\n", cmd); + goto done; + } + res = true; +done: + i2c_master_stop(); + return res; +} + +// Write 2-byte command sequence. +// Returns true on success +static inline bool _send_cmd2(uint8_t cmd, uint8_t opr) { + if (!_send_cmd1(cmd)) { + return false; + } + return _send_cmd1(opr); +} + +// Write 3-byte command sequence. +// Returns true on success +static inline bool _send_cmd3(uint8_t cmd, uint8_t opr1, uint8_t opr2) { + if (!_send_cmd1(cmd)) { + return false; + } + if (!_send_cmd1(opr1)) { + return false; + } + return _send_cmd1(opr2); +} + +#define send_cmd1(c) if (!_send_cmd1(c)) {goto done;} +#define send_cmd2(c,o) if (!_send_cmd2(c,o)) {goto done;} +#define send_cmd3(c,o1,o2) if (!_send_cmd3(c,o1,o2)) {goto done;} + +static void clear_display(void) { + matrix_clear(&display); + + // Clear all of the display bits (there can be random noise + // in the RAM on startup) + send_cmd3(PageAddr, 0, (DisplayHeight / 8) - 1); + send_cmd3(ColumnAddr, 0, DisplayWidth - 1); + + if (i2c_start_write(SSD1306_ADDRESS)) { + goto done; + } + if (i2c_master_write(0x40)) { + // Data mode + goto done; + } + for (uint8_t row = 0; row < MatrixRows; ++row) { + for (uint8_t col = 0; col < DisplayWidth; ++col) { + i2c_master_write(0); + } + } + + display.dirty = false; + +done: + i2c_master_stop(); +} + +#if DEBUG_TO_SCREEN +#undef sendchar +static int8_t capture_sendchar(uint8_t c) { + sendchar(c); + iota_gfx_write_char(c); + + if (!displaying) { + iota_gfx_flush(); + } + return 0; +} +#endif + +bool iota_gfx_init(bool rotate) { + bool success = false; + + i2c_master_init(); + send_cmd1(DisplayOff); + send_cmd2(SetDisplayClockDiv, 0x80); + send_cmd2(SetMultiPlex, DisplayHeight - 1); + + send_cmd2(SetDisplayOffset, 0); + + + send_cmd1(SetStartLine | 0x0); + send_cmd2(SetChargePump, 0x14 /* Enable */); + send_cmd2(SetMemoryMode, 0 /* horizontal addressing */); + + if(rotate){ + // the following Flip the display orientation 180 degrees + send_cmd1(SegRemap); + send_cmd1(ComScanInc); + }else{ + // Flips the display orientation 0 degrees + send_cmd1(SegRemap | 0x1); + send_cmd1(ComScanDec); + } + +#ifdef SSD1306_128X64 + send_cmd2(SetComPins, 0x12); +#else + send_cmd2(SetComPins, 0x2); +#endif + send_cmd2(SetContrast, 0x8f); + send_cmd2(SetPreCharge, 0xf1); + send_cmd2(SetVComDetect, 0x40); + send_cmd1(DisplayAllOnResume); + send_cmd1(NormalDisplay); + send_cmd1(DeActivateScroll); + send_cmd1(DisplayOn); + + send_cmd2(SetContrast, 0); // Dim + + clear_display(); + + success = true; + + iota_gfx_flush(); + +#if DEBUG_TO_SCREEN + print_set_sendchar(capture_sendchar); +#endif + +done: + return success; +} + +bool iota_gfx_off(void) { + bool success = false; + + send_cmd1(DisplayOff); + success = true; + +done: + return success; +} + +bool iota_gfx_on(void) { + bool success = false; + + send_cmd1(DisplayOn); + success = true; + +done: + return success; +} + +void matrix_write_char_inner(struct CharacterMatrix *matrix, uint8_t c) { + *matrix->cursor = c; + ++matrix->cursor; + + if (matrix->cursor - &matrix->display[0][0] == sizeof(matrix->display)) { + // We went off the end; scroll the display upwards by one line + memmove(&matrix->display[0], &matrix->display[1], + MatrixCols * (MatrixRows - 1)); + matrix->cursor = &matrix->display[MatrixRows - 1][0]; + memset(matrix->cursor, ' ', MatrixCols); + } +} + +void matrix_write_char(struct CharacterMatrix *matrix, uint8_t c) { + matrix->dirty = true; + + if (c == '\n') { + // Clear to end of line from the cursor and then move to the + // start of the next line + uint8_t cursor_col = (matrix->cursor - &matrix->display[0][0]) % MatrixCols; + + while (cursor_col++ < MatrixCols) { + matrix_write_char_inner(matrix, ' '); + } + return; + } + + matrix_write_char_inner(matrix, c); +} + +void iota_gfx_write_char(uint8_t c) { + matrix_write_char(&display, c); +} + +void matrix_write(struct CharacterMatrix *matrix, const char *data) { + const char *end = data + strlen(data); + while (data < end) { + matrix_write_char(matrix, *data); + ++data; + } +} + +void matrix_write_ln(struct CharacterMatrix *matrix, const char *data) { + char data_ln[strlen(data)+2]; + snprintf(data_ln, sizeof(data_ln), "%s\n", data); + matrix_write(matrix, data_ln); +} + +void iota_gfx_write(const char *data) { + matrix_write(&display, data); +} + +void matrix_write_P(struct CharacterMatrix *matrix, const char *data) { + while (true) { + uint8_t c = pgm_read_byte(data); + if (c == 0) { + return; + } + matrix_write_char(matrix, c); + ++data; + } +} + +void iota_gfx_write_P(const char *data) { + matrix_write_P(&display, data); +} + +void matrix_clear(struct CharacterMatrix *matrix) { + memset(matrix->display, ' ', sizeof(matrix->display)); + matrix->cursor = &matrix->display[0][0]; + matrix->dirty = true; +} + +void iota_gfx_clear_screen(void) { + matrix_clear(&display); +} + +void matrix_render(struct CharacterMatrix *matrix) { + last_flush = timer_read(); + iota_gfx_on(); +#if DEBUG_TO_SCREEN + ++displaying; +#endif + + // Move to the home position + send_cmd3(PageAddr, 0, MatrixRows - 1); + send_cmd3(ColumnAddr, 0, (MatrixCols * FontWidth) - 1); + + if (i2c_start_write(SSD1306_ADDRESS)) { + goto done; + } + if (i2c_master_write(0x40)) { + // Data mode + goto done; + } + + for (uint8_t row = 0; row < MatrixRows; ++row) { + for (uint8_t col = 0; col < MatrixCols; ++col) { + const uint8_t *glyph = font + (matrix->display[row][col] * FontWidth); + + for (uint8_t glyphCol = 0; glyphCol < FontWidth; ++glyphCol) { + uint8_t colBits = pgm_read_byte(glyph + glyphCol); + i2c_master_write(colBits); + } + + // 1 column of space between chars (it's not included in the glyph) + //i2c_master_write(0); + } + } + + matrix->dirty = false; + +done: + i2c_master_stop(); +#if DEBUG_TO_SCREEN + --displaying; +#endif +} + +void iota_gfx_flush(void) { + matrix_render(&display); +} + +__attribute__ ((weak)) +void iota_gfx_task_user(void) { +} + +void iota_gfx_task(void) { + iota_gfx_task_user(); + + if (display.dirty|| force_dirty) { + iota_gfx_flush(); + force_dirty = false; + } + + if (timer_elapsed(last_flush) > ScreenOffInterval) { + iota_gfx_off(); + } +} + +bool process_record_gfx(uint16_t keycode, keyrecord_t *record) { + force_dirty = true; + return true; +} + +#endif diff --git a/keyboards/yosino58/ssd1306.h b/keyboards/yosino58/ssd1306.h new file mode 100644 index 00000000000..de0a9a02aa5 --- /dev/null +++ b/keyboards/yosino58/ssd1306.h @@ -0,0 +1,96 @@ +#pragma once + +#include +#include +#include "pincontrol.h" +#include "action.h" + +enum ssd1306_cmds { + DisplayOff = 0xAE, + DisplayOn = 0xAF, + + SetContrast = 0x81, + DisplayAllOnResume = 0xA4, + + DisplayAllOn = 0xA5, + NormalDisplay = 0xA6, + InvertDisplay = 0xA7, + SetDisplayOffset = 0xD3, + SetComPins = 0xda, + SetVComDetect = 0xdb, + SetDisplayClockDiv = 0xD5, + SetPreCharge = 0xd9, + SetMultiPlex = 0xa8, + SetLowColumn = 0x00, + SetHighColumn = 0x10, + SetStartLine = 0x40, + + SetMemoryMode = 0x20, + ColumnAddr = 0x21, + PageAddr = 0x22, + + ComScanInc = 0xc0, + ComScanDec = 0xc8, + SegRemap = 0xa0, + SetChargePump = 0x8d, + ExternalVcc = 0x01, + SwitchCapVcc = 0x02, + + ActivateScroll = 0x2f, + DeActivateScroll = 0x2e, + SetVerticalScrollArea = 0xa3, + RightHorizontalScroll = 0x26, + LeftHorizontalScroll = 0x27, + VerticalAndRightHorizontalScroll = 0x29, + VerticalAndLeftHorizontalScroll = 0x2a, +}; + +// Controls the SSD1306 128x32 OLED display via i2c + +#ifndef SSD1306_ADDRESS +#define SSD1306_ADDRESS 0x3C +#endif + +#ifdef SSD1306_128X64 +#define DisplayHeight 64 +#else +#define DisplayHeight 32 +#endif +#define DisplayWidth 128 + + +#define FontHeight 8 +#define FontWidth 6 + +#define MatrixRows (DisplayHeight / FontHeight) +#define MatrixCols (DisplayWidth / FontWidth) + +struct CharacterMatrix { + uint8_t display[MatrixRows][MatrixCols]; + uint8_t *cursor; + bool dirty; +}; + +struct CharacterMatrix display; + +bool iota_gfx_init(bool rotate); +void iota_gfx_task(void); +bool iota_gfx_off(void); +bool iota_gfx_on(void); +void iota_gfx_flush(void); +void iota_gfx_write_char(uint8_t c); +void iota_gfx_write(const char *data); +void iota_gfx_write_P(const char *data); +void iota_gfx_clear_screen(void); + +void iota_gfx_task_user(void); + +void matrix_clear(struct CharacterMatrix *matrix); +void matrix_write_char_inner(struct CharacterMatrix *matrix, uint8_t c); +void matrix_write_char(struct CharacterMatrix *matrix, uint8_t c); +void matrix_write(struct CharacterMatrix *matrix, const char *data); +void matrix_write_ln(struct CharacterMatrix *matrix, const char *data); +void matrix_write_P(struct CharacterMatrix *matrix, const char *data); +void matrix_render(struct CharacterMatrix *matrix); + +bool process_record_gfx(uint16_t keycode, keyrecord_t *record); \ No newline at end of file diff --git a/keyboards/yosino58/yosino58.c b/keyboards/yosino58/yosino58.c new file mode 100644 index 00000000000..ff3ec10e5a4 --- /dev/null +++ b/keyboards/yosino58/yosino58.c @@ -0,0 +1,10 @@ +#include "yosino58.h" +#include "ssd1306.h" + +bool process_record_kb(uint16_t keycode, keyrecord_t *record) { +#ifdef SSD1306OLED + return process_record_gfx(keycode,record) && process_record_user(keycode, record); +#else + return process_record_user(keycode, record); +#endif +} diff --git a/keyboards/yosino58/yosino58.h b/keyboards/yosino58/yosino58.h new file mode 100644 index 00000000000..5414c31bd80 --- /dev/null +++ b/keyboards/yosino58/yosino58.h @@ -0,0 +1,5 @@ +#pragma once + +#ifdef KEYBOARD_yosino58_rev1 + #include "rev1.h" +#endif From 0137b0231957c0b2fde80ac0e2a769ba4cbd60e7 Mon Sep 17 00:00:00 2001 From: zvecr Date: Thu, 11 Apr 2019 19:51:55 +0100 Subject: [PATCH 071/171] Port DIRECT_PINS from split_common/matrix.c to matrix.c (#5091) * Port DIRECT_PINS from split_common/matrix.c to matrix.c * Reorder matrix.c to remove foward declaration and match split_common/matrix.c * Refactor nano to use DIRECT_PINS * Reorder matrix.c to remove foward declaration and match split_common/matrix.c * Add DIRECT_PINS documentation * Reorder matrix.c to remove foward declaration and match split_common/matrix.c - fix logic from inherited from split_common * Add DIRECT_PINS documentation - review comments --- docs/config_options.md | 2 + docs/hardware_avr.md | 18 ++ ...ard_to_qmk_(arm_and_other_chibios_cpus).md | 2 + keyboards/40percentclub/nano/config.h | 27 ++- keyboards/40percentclub/nano/matrix.c | 159 ------------- keyboards/40percentclub/nano/nano.h | 4 +- keyboards/40percentclub/nano/rules.mk | 4 - quantum/matrix.c | 215 +++++++++--------- 8 files changed, 159 insertions(+), 272 deletions(-) delete mode 100644 keyboards/40percentclub/nano/matrix.c diff --git a/docs/config_options.md b/docs/config_options.md index c5131a84145..bc2a890586c 100644 --- a/docs/config_options.md +++ b/docs/config_options.md @@ -59,6 +59,8 @@ This is a C header file that is one of the first things included, and will persi * define is matrix has ghost (unlikely) * `#define DIODE_DIRECTION COL2ROW` * COL2ROW or ROW2COL - how your matrix is configured. COL2ROW means the black mark on your diode is facing to the rows, and between the switch and the rows. +* `#define DIRECT_PINS { { F1, F0, B0, C7 }, { F4, F5, F6, F7 } }` + * pins mapped to rows and columns, from left to right. Defines a matrix where each switch is connected to a separate pin and ground. * `#define AUDIO_VOICES` * turns on the alternate audio voices (to cycle through) * `#define C4_AUDIO` diff --git a/docs/hardware_avr.md b/docs/hardware_avr.md index 12a0059c3fe..acf7088a396 100644 --- a/docs/hardware_avr.md +++ b/docs/hardware_avr.md @@ -93,6 +93,24 @@ Finally, you can specify the direction your diodes point. This can be `COL2ROW` #define DIODE_DIRECTION COL2ROW ``` +#### Direct Pin Matrix +To configure a keyboard where each switch is connected to a separate pin and ground instead of sharing row and column pins, use `DIRECT_PINS`. The mapping defines the pins of each switch in rows and columns, from left to right. Must conform to the sizes within `MATRIX_ROWS` and `MATRIX_COLS`, use `NO_PIN` to fill in blank spaces. Overrides the behaviour of `DIODE_DIRECTION`, `MATRIX_ROW_PINS` and `MATRIX_COL_PINS`. + +```c +// #define MATRIX_ROW_PINS { D0, D5 } +// #define MATRIX_COL_PINS { F1, F0, B0 } +#define DIRECT_PINS { \ + { F1, E6, B0, B2, B3 }, \ + { F5, F0, B1, B7, D2 }, \ + { F6, F7, C7, D5, D3 }, \ + { B5, C6, B6, NO_PIN, NO_PIN } \ +} +#define UNUSED_PINS + +/* COL2ROW, ROW2COL */ +//#define DIODE_DIRECTION +``` + ### Backlight Configuration By default QMK supports backlighting on pins `B5`, `B6`, and `B7`. If you are using one of those you can simply enable it here. For more details see the [Backlight Documentation](feature_backlight.md). diff --git a/docs/porting_your_keyboard_to_qmk_(arm_and_other_chibios_cpus).md b/docs/porting_your_keyboard_to_qmk_(arm_and_other_chibios_cpus).md index c32c428cf01..d8e084f466c 100644 --- a/docs/porting_your_keyboard_to_qmk_(arm_and_other_chibios_cpus).md +++ b/docs/porting_your_keyboard_to_qmk_(arm_and_other_chibios_cpus).md @@ -22,6 +22,8 @@ The `MATRIX_ROW_PINS` and `MATRIX_COL_PINS` are the pins your MCU uses on each r For the `DIODE_DIRECTION`, most hand-wiring guides will instruct you to wire the diodes in the `COL2ROW` position, but it's possible that they are in the other - people coming from EasyAVR often use `ROW2COL`. Nothing will function if this is incorrect. +To configure a keyboard where each switch is connected to a separate pin and ground instead of sharing row and column pins, use `DIRECT_PINS`. The mapping defines the pins of each switch in rows and columns, from left to right. Must conform to the sizes within `MATRIX_ROWS` and `MATRIX_COLS`, use `NO_PIN` to fill in blank spaces. Overrides the behaviour of `DIODE_DIRECTION`, `MATRIX_ROW_PINS` and `MATRIX_COL_PINS`. + `BACKLIGHT_PIN` is the pin that your PWM-controlled backlight (if one exists) is hooked-up to. Currently only B5, B6, and B7 are supported. `BACKLIGHT_BREATHING` is a fancier backlight feature that adds breathing/pulsing/fading effects to the backlight. It uses the same timer as the normal backlight. These breathing effects must be called by code in your keymap. diff --git a/keyboards/40percentclub/nano/config.h b/keyboards/40percentclub/nano/config.h index 36840d2f6c1..5eb65c74ad8 100644 --- a/keyboards/40percentclub/nano/config.h +++ b/keyboards/40percentclub/nano/config.h @@ -31,12 +31,29 @@ along with this program. If not, see . #define MATRIX_ROWS 2 #define MATRIX_COLS 4 +/* + * Keyboard Matrix Assignments + * + * Change this to how you wired your keyboard + * COLS: AVR pins used for columns, left to right + * ROWS: AVR pins used for rows, top to bottom + * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) + * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) + * NO_DIODE = switches are directly connected to AVR pins + * +*/ +// #define MATRIX_ROW_PINS { D0, D5 } +// #define MATRIX_COL_PINS { F1, F0, B0 } +#define DIRECT_PINS { \ + { F4, F5, F6, F7 }, \ + { D1, D0, D4, C6 }, \ +} +#define UNUSED_PINS + +/* COL2ROW, ROW2COL, or CUSTOM_MATRIX */ +//#define DIODE_DIRECTION CUSTOM_MATRIX + /* ws2812 RGB LED */ #define RGB_DI_PIN D3 #define RGBLIGHT_ANIMATIONS #define RGBLED_NUM 6 // Number of LEDs - -/* COL2ROW or ROW2COL */ -#define DIODE_DIRECTION COL2ROW - -#define TAPPING_TERM 200 diff --git a/keyboards/40percentclub/nano/matrix.c b/keyboards/40percentclub/nano/matrix.c deleted file mode 100644 index fa2461af5fe..00000000000 --- a/keyboards/40percentclub/nano/matrix.c +++ /dev/null @@ -1,159 +0,0 @@ -/* - -Note for ErgoDox EZ customizers: Here be dragons! -This is not a file you want to be messing with. -All of the interesting stuff for you is under keymaps/ :) -Love, Erez - -Copyright 2013 Oleg Kostyuk - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see . -*/ - -/* - * scan matrix - */ -#include -#include -#include -#include -#include "action_layer.h" -#include "print.h" -#include "debug.h" -#include "util.h" -#include "matrix.h" -#include "nano.h" -#include - -/* matrix state(1:on, 0:off) */ -static matrix_row_t matrix[MATRIX_ROWS]; -static matrix_row_t matrix_stage[MATRIX_ROWS]; -static matrix_row_t matrix_debouncing[MATRIX_ROWS]; - -static uint16_t debouncing_time; -static bool debouncing = false; - -__attribute__ ((weak)) -void matrix_init_kb(void) { - matrix_init_user(); -} - -__attribute__ ((weak)) -void matrix_scan_kb(void) { - matrix_scan_user(); -} - -__attribute__ ((weak)) -void matrix_init_user(void) { -} - -__attribute__ ((weak)) -void matrix_scan_user(void) { -} - -inline -uint8_t matrix_rows(void) -{ - return MATRIX_ROWS; -} - -inline -uint8_t matrix_cols(void) -{ - return MATRIX_COLS; -} - -void matrix_init(void) -{ - - DDRF &= ~(1<<4 | 1<<5 | 1<<6 | 1<<7); - PORTF |= (1<<4 | 1<<5 | 1<<6 | 1<<7); - DDRC &= ~(1<<6); - PORTC |= (1<<6); - DDRD &= ~(1<<0 | 1<<1 | 1<<4); - PORTD |= (1<<0 | 1<<1 | 1<<4); - - for (uint8_t i = 0; i < MATRIX_ROWS; i++) { - matrix[i] = 0; - matrix_debouncing[i] = 0; - matrix_stage[i] = 0; - } - - matrix_init_quantum(); - -} - -uint8_t matrix_scan(void) -{ - matrix_stage[0] = - (PINF&(1<<4) ? 0 : (1<<0)) | - (PINF&(1<<5) ? 0 : (1<<1)) | - (PINF&(1<<6) ? 0 : (1<<2)) | - (PINF&(1<<7) ? 0 : (1<<3)); - matrix_stage[1] = - (PIND&(1<<1) ? 0 : (1<<0)) | - (PIND&(1<<0) ? 0 : (1<<1)) | - (PIND&(1<<4) ? 0 : (1<<2)) | - (PINC&(1<<6) ? 0 : (1<<3)); - - if (memcmp(matrix_debouncing, matrix_stage, sizeof(matrix)) != 0) { - debouncing = true; - debouncing_time = timer_read(); - } - - matrix_debouncing[0] = matrix_stage[0]; - matrix_debouncing[1] = matrix_stage[1]; - - if (debouncing && (timer_elapsed(debouncing_time) > 20)) { - for (uint8_t i = 0; i < MATRIX_ROWS; i++) { - matrix[i] = matrix_debouncing[i]; - } - debouncing = false; - } - - matrix_scan_quantum(); - - return 1; -} - -bool matrix_is_modified(void) -{ - return true; -} - -inline -bool matrix_is_on(uint8_t row, uint8_t col) -{ - return (matrix[row] & ((matrix_row_t)1<. extern const matrix_row_t matrix_mask[]; #endif -#if (DIODE_DIRECTION == ROW2COL) || (DIODE_DIRECTION == COL2ROW) +#ifdef DIRECT_PINS +static pin_t direct_pins[MATRIX_ROWS][MATRIX_COLS] = DIRECT_PINS; +#elif (DIODE_DIRECTION == ROW2COL) || (DIODE_DIRECTION == COL2ROW) static const pin_t row_pins[MATRIX_ROWS] = MATRIX_ROW_PINS; static const pin_t col_pins[MATRIX_COLS] = MATRIX_COL_PINS; #endif @@ -54,20 +56,6 @@ static const pin_t col_pins[MATRIX_COLS] = MATRIX_COL_PINS; static matrix_row_t raw_matrix[MATRIX_ROWS]; //raw values static matrix_row_t matrix[MATRIX_ROWS]; //debounced values -#if (DIODE_DIRECTION == COL2ROW) - static void init_cols(void); - static bool read_cols_on_row(matrix_row_t current_matrix[], uint8_t current_row); - static void unselect_rows(void); - static void select_row(uint8_t row); - static void unselect_row(uint8_t row); -#elif (DIODE_DIRECTION == ROW2COL) - static void init_rows(void); - static bool read_rows_on_col(matrix_row_t current_matrix[], uint8_t current_col); - static void unselect_cols(void); - static void unselect_col(uint8_t col); - static void select_col(uint8_t col); -#endif - __attribute__ ((weak)) void matrix_init_quantum(void) { matrix_init_kb(); @@ -106,49 +94,6 @@ uint8_t matrix_cols(void) { return MATRIX_COLS; } -void matrix_init(void) { - - // initialize row and col -#if (DIODE_DIRECTION == COL2ROW) - unselect_rows(); - init_cols(); -#elif (DIODE_DIRECTION == ROW2COL) - unselect_cols(); - init_rows(); -#endif - - // initialize matrix state: all keys off - for (uint8_t i=0; i < MATRIX_ROWS; i++) { - raw_matrix[i] = 0; - matrix[i] = 0; - } - debounce_init(MATRIX_ROWS); - - matrix_init_quantum(); -} - -uint8_t matrix_scan(void) -{ - bool changed = false; - -#if (DIODE_DIRECTION == COL2ROW) - // Set row, read cols - for (uint8_t current_row = 0; current_row < MATRIX_ROWS; current_row++) { - changed |= read_cols_on_row(raw_matrix, current_row); - } -#elif (DIODE_DIRECTION == ROW2COL) - // Set col, read rows - for (uint8_t current_col = 0; current_col < MATRIX_COLS; current_col++) { - changed |= read_rows_on_col(raw_matrix, current_col); - } -#endif - - debounce(raw_matrix, matrix, MATRIX_ROWS, changed); - - matrix_scan_quantum(); - return 1; -} - //Deprecated. bool matrix_is_modified(void) { @@ -195,14 +140,58 @@ uint8_t matrix_key_count(void) } +#ifdef DIRECT_PINS -#if (DIODE_DIRECTION == COL2ROW) - -static void init_cols(void) -{ - for(uint8_t x = 0; x < MATRIX_COLS; x++) { - setPinInputHigh(col_pins[x]); +static void init_pins(void) { + for (int row = 0; row < MATRIX_ROWS; row++) { + for (int col = 0; col < MATRIX_COLS; col++) { + pin_t pin = direct_pins[row][col]; + if (pin != NO_PIN) { + setPinInputHigh(pin); + } } + } +} + +static bool read_cols_on_row(matrix_row_t current_matrix[], uint8_t current_row) { + matrix_row_t last_row_value = current_matrix[current_row]; + current_matrix[current_row] = 0; + + for (uint8_t col_index = 0; col_index < MATRIX_COLS; col_index++) { + pin_t pin = direct_pins[current_row][col_index]; + if (pin != NO_PIN) { + current_matrix[current_row] |= readPin(pin) ? 0 : (ROW_SHIFTER << col_index); + } + } + + return (last_row_value != current_matrix[current_row]); +} + +#elif (DIODE_DIRECTION == COL2ROW) + +static void select_row(uint8_t row) +{ + setPinOutput(row_pins[row]); + writePinLow(row_pins[row]); +} + +static void unselect_row(uint8_t row) +{ + setPinInputHigh(row_pins[row]); +} + +static void unselect_rows(void) +{ + for(uint8_t x = 0; x < MATRIX_ROWS; x++) { + setPinInput(row_pins[x]); + } +} + +static void init_pins(void) { + unselect_rows(); + for (uint8_t x = 0; x < MATRIX_COLS; x++) { + setPinInputHigh(col_pins[x]); + } } static bool read_cols_on_row(matrix_row_t current_matrix[], uint8_t current_row) @@ -233,33 +222,33 @@ static bool read_cols_on_row(matrix_row_t current_matrix[], uint8_t current_row) return (last_row_value != current_matrix[current_row]); } -static void select_row(uint8_t row) -{ - setPinOutput(row_pins[row]); - writePinLow(row_pins[row]); -} - -static void unselect_row(uint8_t row) -{ - setPinInputHigh(row_pins[row]); -} - -static void unselect_rows(void) -{ - for(uint8_t x = 0; x < MATRIX_ROWS; x++) { - setPinInput(row_pins[x]); - } -} - #elif (DIODE_DIRECTION == ROW2COL) -static void init_rows(void) +static void select_col(uint8_t col) { - for(uint8_t x = 0; x < MATRIX_ROWS; x++) { - setPinInputHigh(row_pins[x]); + setPinOutput(col_pins[col]); + writePinLow(col_pins[col]); +} + +static void unselect_col(uint8_t col) +{ + setPinInputHigh(col_pins[col]); +} + +static void unselect_cols(void) +{ + for(uint8_t x = 0; x < MATRIX_COLS; x++) { + setPinInputHigh(col_pins[x]); } } +static void init_pins(void) { + unselect_cols(); + for (uint8_t x = 0; x < MATRIX_ROWS; x++) { + setPinInputHigh(row_pins[x]); + } +} + static bool read_rows_on_col(matrix_row_t current_matrix[], uint8_t current_col) { bool matrix_changed = false; @@ -300,22 +289,42 @@ static bool read_rows_on_col(matrix_row_t current_matrix[], uint8_t current_col) return matrix_changed; } -static void select_col(uint8_t col) -{ - setPinOutput(col_pins[col]); - writePinLow(col_pins[col]); -} - -static void unselect_col(uint8_t col) -{ - setPinInputHigh(col_pins[col]); -} - -static void unselect_cols(void) -{ - for(uint8_t x = 0; x < MATRIX_COLS; x++) { - setPinInputHigh(col_pins[x]); - } -} - #endif + +void matrix_init(void) { + + // initialize key pins + init_pins(); + + // initialize matrix state: all keys off + for (uint8_t i=0; i < MATRIX_ROWS; i++) { + raw_matrix[i] = 0; + matrix[i] = 0; + } + + debounce_init(MATRIX_ROWS); + + matrix_init_quantum(); +} + +uint8_t matrix_scan(void) +{ + bool changed = false; + +#if defined(DIRECT_PINS) || (DIODE_DIRECTION == COL2ROW) + // Set row, read cols + for (uint8_t current_row = 0; current_row < MATRIX_ROWS; current_row++) { + changed |= read_cols_on_row(raw_matrix, current_row); + } +#elif (DIODE_DIRECTION == ROW2COL) + // Set col, read rows + for (uint8_t current_col = 0; current_col < MATRIX_COLS; current_col++) { + changed |= read_rows_on_col(raw_matrix, current_col); + } +#endif + + debounce(raw_matrix, matrix, MATRIX_ROWS, changed); + + matrix_scan_quantum(); + return 1; +} From c78bc6a2fecb1853cc095a37c84de3a69dea142f Mon Sep 17 00:00:00 2001 From: kaylanm <1063516+kaylanm@users.noreply.github.com> Date: Thu, 11 Apr 2019 15:24:29 -0400 Subject: [PATCH 072/171] Use DIRECT_PINS for BDN9 (#5603) --- keyboards/keebio/bdn9/bdn9.h | 4 +++- keyboards/keebio/bdn9/config.h | 14 +++++++------- 2 files changed, 10 insertions(+), 8 deletions(-) diff --git a/keyboards/keebio/bdn9/bdn9.h b/keyboards/keebio/bdn9/bdn9.h index 26b04356050..8a451132647 100644 --- a/keyboards/keebio/bdn9/bdn9.h +++ b/keyboards/keebio/bdn9/bdn9.h @@ -31,5 +31,7 @@ KC1, KC2, KC3 \ ) \ { \ - { KA1, KA2, KA3, KB1, KB2, KB3, KC1, KC2, KC3 } \ + { KA1, KA2, KA3 }, \ + { KB1, KB2, KB3 }, \ + { KC1, KC2, KC3 } \ } diff --git a/keyboards/keebio/bdn9/config.h b/keyboards/keebio/bdn9/config.h index ad0ada04017..1637ce45f1c 100644 --- a/keyboards/keebio/bdn9/config.h +++ b/keyboards/keebio/bdn9/config.h @@ -28,15 +28,15 @@ along with this program. If not, see . #define DESCRIPTION 3x3 Macropad with Rotary Encoders /* key matrix size */ -#define MATRIX_ROWS 1 -#define MATRIX_COLS 9 +#define MATRIX_ROWS 3 +#define MATRIX_COLS 3 /* Keyboard Matrix Assignments */ -#define MATRIX_ROW_PINS { NO_PIN } -#define MATRIX_COL_PINS { D2, D4, F4, D7, B1, B3, E6, B4, B2 } - -/* COL2ROW, ROW2COL*/ -#define DIODE_DIRECTION COL2ROW +#define DIRECT_PINS { \ + { D2, D4, F4 }, \ + { D7, B1, B3 }, \ + { E6, B4, B2 } \ +} #define NUMBER_OF_ENCODERS 2 #define ENCODERS_PAD_A { D1, F5 } From 2df82514ab9e33342d985e7b6065c3b921402391 Mon Sep 17 00:00:00 2001 From: noroadsleft <18669334+noroadsleft@users.noreply.github.com> Date: Thu, 11 Apr 2019 15:39:40 -0700 Subject: [PATCH 073/171] Update ps2avrgb readme template (#5584) - fix markdown formatting on macOS instructions (close code block) - update package install commands - set python3 - use pip3 to install pyusb - fix typo (extra backtick on bootloadhid package install line) - update Keyboard Maintainer line (now unified with AVR template) --- quantum/template/ps2avrgb/readme.md | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/quantum/template/ps2avrgb/readme.md b/quantum/template/ps2avrgb/readme.md index feec722a521..ef24deb8f75 100644 --- a/quantum/template/ps2avrgb/readme.md +++ b/quantum/template/ps2avrgb/readme.md @@ -4,7 +4,7 @@ A short description of the keyboard/project -Keyboard Maintainer: [You](https://github.com/yourusername) +Keyboard Maintainer: [%YOUR_NAME%](https://github.com/yourusername) Hardware Supported: The PCBs, controllers supported Hardware Availability: links to where you can find this hardware @@ -34,10 +34,10 @@ macOS: ``` 3. Install the following packages: ``` - brew install python - brew install pyusb - brew install --HEAD`https://raw.githubusercontent.com/robertgzr/homebrew-tap/master/bootloadhid.rb - + brew install python3 + pip3 install pyusb + brew install --HEAD https://raw.githubusercontent.com/robertgzr/homebrew-tap/master/bootloadhid.rb + ``` 4. Place your keyboard into reset. 5. Flash the board by typing `bootloadHID -r` followed by the path to your `.hex` file. From 2a55368a59e8fcacff19ab9da7c857fa14fc9a11 Mon Sep 17 00:00:00 2001 From: mechmerlin Date: Thu, 11 Apr 2019 18:26:43 -0700 Subject: [PATCH 074/171] add in the missing #defines --- keyboards/rama/koyu/config.h | 15 +++++++++++++++ 1 file changed, 15 insertions(+) diff --git a/keyboards/rama/koyu/config.h b/keyboards/rama/koyu/config.h index 12dc3d02b59..e7817e79a09 100644 --- a/keyboards/rama/koyu/config.h +++ b/keyboards/rama/koyu/config.h @@ -90,9 +90,19 @@ // disable backlight after timeout in minutes, 0 = no timeout #define RGB_BACKLIGHT_DISABLE_AFTER_TIMEOUT 0 +// the default brightness +#define RGB_BACKLIGHT_BRIGHTNESS 255 + // the default effect (RGB test) #define RGB_BACKLIGHT_EFFECT 255 +// the default effect speed (0-3) +#define RGB_BACKLIGHT_EFFECT_SPEED 0 + +// the default color1 and color2 +#define RGB_BACKLIGHT_COLOR_1 { .h = 0, .s = 255 } +#define RGB_BACKLIGHT_COLOR_2 { .h = 127, .s = 255 } + // These define which keys in the matrix are alphas/mods // Used for backlight effects so colors are different for // alphas vs. mods @@ -104,6 +114,11 @@ #define RGB_BACKLIGHT_ALPHAS_MODS_ROW_3 0b0111000000000001 #define RGB_BACKLIGHT_ALPHAS_MODS_ROW_4 0b0111100000000111 +#define RGB_BACKLIGHT_CAPS_LOCK_INDICATOR { .color = { .h = 0, .s = 0 }, .index = 255 } +#define RGB_BACKLIGHT_LAYER_1_INDICATOR { .color = { .h = 0, .s = 0 }, .index = 255 } +#define RGB_BACKLIGHT_LAYER_2_INDICATOR { .color = { .h = 0, .s = 0 }, .index = 255 } +#define RGB_BACKLIGHT_LAYER_3_INDICATOR { .color = { .h = 0, .s = 0 }, .index = 255 } + #define DYNAMIC_KEYMAP_LAYER_COUNT 4 // EEPROM usage From dc267f96c79b82e6b7eb77a36cdfe8b81e601519 Mon Sep 17 00:00:00 2001 From: holtenc Date: Fri, 12 Apr 2019 11:23:04 -0500 Subject: [PATCH 075/171] Flesh out keymaps and some tweaks to indicators (#5608) * correct indicator light states. function of indicator lights was inverted. these changes correct that. * flesh out keymaps pre production --- .../primekb/prime_e/keymaps/default/keymap.c | 32 +++++++++++++++---- .../primekb/prime_e/keymaps/via/keymap.c | 31 +++++++++++++++--- 2 files changed, 52 insertions(+), 11 deletions(-) diff --git a/keyboards/primekb/prime_e/keymaps/default/keymap.c b/keyboards/primekb/prime_e/keymaps/default/keymap.c index 0aab745cd58..5a09cb9694c 100644 --- a/keyboards/primekb/prime_e/keymaps/default/keymap.c +++ b/keyboards/primekb/prime_e/keymaps/default/keymap.c @@ -19,22 +19,42 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { LAYOUT( KC_ESC, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_DEL, KC_BSPC, KC_TAB, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_QUOT, KC_ENT, - KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, MO(1), KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_LSFT, - KC_LCTL, KC_LALT, KC_RBRC, MO(1), KC_SPC, KC_MINS, KC_LGUI, TO(1) - ) + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, MO(3), KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_LSFT, + KC_LCTL, KC_LALT, MO(2), MO(1), KC_SPC, KC_RALT, KC_RGUI, KC_RCTL + ), + LAYOUT( + KC_GRV, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_UP, KC_TRNS, KC_MUTE, KC_VOLD, KC_VOLU, + KC_CAPS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_LEFT, KC_DOWN, KC_RIGHT, KC_SCLN, KC_BSLS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + BL_TOGG, BL_STEP, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS + ), + + LAYOUT( + KC_TRNS, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_P4, KC_P5, KC_P6, KC_LBRC, KC_RBRC, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_P1, KC_P2, KC_P3, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PENT, KC_PDOT, KC_TRNS, KC_TRNS + ), + + LAYOUT( + KC_TRNS, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS + ) }; void matrix_init_user(void) { // set CapsLock LED to output and low setPinOutput(B1); - writePinHigh(B1); + writePinLow(B1); // set NumLock LED to output and low setPinOutput(B2); - writePinHigh(B2); + writePinLow(B2); // set ScrollLock LED to output and low setPinOutput(B3); - writePinHigh(B3); + writePinLow(B3); } void matrix_scan_user(void) { diff --git a/keyboards/primekb/prime_e/keymaps/via/keymap.c b/keyboards/primekb/prime_e/keymaps/via/keymap.c index 8b5b13866a6..5a09cb9694c 100644 --- a/keyboards/primekb/prime_e/keymaps/via/keymap.c +++ b/keyboards/primekb/prime_e/keymaps/via/keymap.c @@ -19,21 +19,42 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { LAYOUT( KC_ESC, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_DEL, KC_BSPC, KC_TAB, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_QUOT, KC_ENT, - KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, MO(1), KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_LSFT, - KC_LCTL, KC_LALT, KC_RBRC, MO(1), KC_SPC, KC_MINS, KC_LGUI, TO(1) + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, MO(3), KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_LSFT, + KC_LCTL, KC_LALT, MO(2), MO(1), KC_SPC, KC_RALT, KC_RGUI, KC_RCTL + ), + + LAYOUT( + KC_GRV, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_UP, KC_TRNS, KC_MUTE, KC_VOLD, KC_VOLU, + KC_CAPS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_LEFT, KC_DOWN, KC_RIGHT, KC_SCLN, KC_BSLS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + BL_TOGG, BL_STEP, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS + ), + + LAYOUT( + KC_TRNS, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_P4, KC_P5, KC_P6, KC_LBRC, KC_RBRC, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_P1, KC_P2, KC_P3, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PENT, KC_PDOT, KC_TRNS, KC_TRNS + ), + + LAYOUT( + KC_TRNS, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS ) }; void matrix_init_user(void) { // set CapsLock LED to output and low setPinOutput(B1); - writePinHigh(B1); + writePinLow(B1); // set NumLock LED to output and low setPinOutput(B2); - writePinHigh(B2); + writePinLow(B2); // set ScrollLock LED to output and low setPinOutput(B3); - writePinHigh(B3); + writePinLow(B3); } void matrix_scan_user(void) { From e93465ffdb7ad6fc3a13f97a94b914b324a3330a Mon Sep 17 00:00:00 2001 From: zvecr Date: Sat, 26 Jan 2019 16:37:31 +0000 Subject: [PATCH 076/171] Apply MAKEFLAGS to speed up CI --- .travis.yml | 1 + 1 file changed, 1 insertion(+) diff --git a/.travis.yml b/.travis.yml index 41a1019978a..261e21dc70a 100644 --- a/.travis.yml +++ b/.travis.yml @@ -10,6 +10,7 @@ branches: env: global: - secure: 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 + - MAKEFLAGS="-j3 --output-sync" before_install: - wget http://ww1.microchip.com/downloads/en/DeviceDoc/avr8-gnu-toolchain-3.5.4.1709-linux.any.x86_64.tar.gz || wget http://qmk.fm/avr8-gnu-toolchain-3.5.4.1709-linux.any.x86_64.tar.gz install: From 0ee4206bd07abd884f13819d782c72f2e6baa071 Mon Sep 17 00:00:00 2001 From: zvecr Date: Sun, 17 Feb 2019 19:14:58 +0000 Subject: [PATCH 077/171] Fix build detection of keymap and board changes --- util/travis_build.sh | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-) diff --git a/util/travis_build.sh b/util/travis_build.sh index a25d871e2df..2c6c62931fe 100755 --- a/util/travis_build.sh +++ b/util/travis_build.sh @@ -17,16 +17,18 @@ if [[ "$TRAVIS_COMMIT_MESSAGE" != *"[skip build]"* ]] ; then else NEFM=$(git diff --name-only -n 1 ${TRAVIS_COMMIT_RANGE} | grep -Ev '^(keyboards/)' | grep -Ev '^(docs/)' | wc -l) BRANCH=$(git rev-parse --abbrev-ref HEAD) + # is this branch master or a "non docs, non keyboards" change if [ $NEFM -gt 0 -o "$BRANCH" = "master" ]; then echo "Making default keymaps for all keyboards" eval $MAKE_ALL : $((exit_code = $exit_code + $?)) else - MKB=$(git diff --name-only -n 1 ${TRAVIS_COMMIT_RANGE} | grep -oP '(?<=keyboards\/)([a-zA-Z0-9_\/]+)(?=\/)' | sort -u) + # keyboards project format + # /keyboards/board1/rev/keymaps/ + # /keyboards/board2/keymaps/ + # ensure we strip everything off after and including the keymaps folder to get board and/or revision + MKB=$(git diff --name-only -n 1 ${TRAVIS_COMMIT_RANGE} | grep -oP '(?<=keyboards\/)([a-zA-Z0-9_\/]+)(?=\/)' | sed 's^/keymaps/.*^^' | sort -u) for KB in $MKB ; do - if [[ $KB == *keymaps* ]]; then - continue - fi KEYMAP_ONLY=$(git diff --name-only -n 1 ${TRAVIS_COMMIT_RANGE} | grep -Ev '^(keyboards/'${KB}'/keymaps/)' | wc -l) if [[ $KEYMAP_ONLY -gt 0 ]]; then echo "Making all keymaps for $KB" From c27d96b4c1ed8aa5bf9cad20380b8f723b149a83 Mon Sep 17 00:00:00 2001 From: Drashna Jaelre Date: Mon, 10 Dec 2018 20:22:51 -0800 Subject: [PATCH 078/171] Fix ATSAM's USB HID descriptor to support higher heycodes Assuming I understand this correctly, this should set the max scancode to E7 (RGUI), which is the last listed code in the main list (everything else use for internal QMK/TMK stuff). --- tmk_core/protocol/arm_atsam/usb/udi_hid_kbd.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/tmk_core/protocol/arm_atsam/usb/udi_hid_kbd.c b/tmk_core/protocol/arm_atsam/usb/udi_hid_kbd.c index c263ac4aa1d..467a284a4ae 100644 --- a/tmk_core/protocol/arm_atsam/usb/udi_hid_kbd.c +++ b/tmk_core/protocol/arm_atsam/usb/udi_hid_kbd.c @@ -109,9 +109,9 @@ UDC_DESC_STORAGE udi_hid_kbd_report_desc_t udi_hid_kbd_report_desc = { 0x81, 0x02, // Input (Data, Variable, Absolute) 0x81, 0x01, // Input (Constant) 0x19, 0x00, // Usage Minimum (0) - 0x29, 0x65, // Usage Maximum (101) + 0x29, 0xE7, // Usage Maximum (231) 0x15, 0x00, // Logical Minimum (0) - 0x25, 0x65, // Logical Maximum (101) + 0x25, 0xE7, // Logical Maximum (231) 0x75, 0x08, // Report Size (8) 0x95, 0x06, // Report Count (6) 0x81, 0x00, // Input (Data, Array) From a9a5fd754ed30a3d9453c77b5f622898848d3042 Mon Sep 17 00:00:00 2001 From: Drashna Jaelre Date: Mon, 18 Feb 2019 19:00:19 -0800 Subject: [PATCH 079/171] Max out range for max compatibility --- tmk_core/protocol/arm_atsam/usb/udi_hid_kbd.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/tmk_core/protocol/arm_atsam/usb/udi_hid_kbd.c b/tmk_core/protocol/arm_atsam/usb/udi_hid_kbd.c index 467a284a4ae..b715b702658 100644 --- a/tmk_core/protocol/arm_atsam/usb/udi_hid_kbd.c +++ b/tmk_core/protocol/arm_atsam/usb/udi_hid_kbd.c @@ -109,9 +109,9 @@ UDC_DESC_STORAGE udi_hid_kbd_report_desc_t udi_hid_kbd_report_desc = { 0x81, 0x02, // Input (Data, Variable, Absolute) 0x81, 0x01, // Input (Constant) 0x19, 0x00, // Usage Minimum (0) - 0x29, 0xE7, // Usage Maximum (231) + 0x29, 0xFF, // Usage Maximum (255) 0x15, 0x00, // Logical Minimum (0) - 0x25, 0xE7, // Logical Maximum (231) + 0x25, 0xFF, // Logical Maximum (255) 0x75, 0x08, // Report Size (8) 0x95, 0x06, // Report Count (6) 0x81, 0x00, // Input (Data, Array) From 0e88d756f92d1254c58e66f9538c07b68ded489c Mon Sep 17 00:00:00 2001 From: zvecr Date: Fri, 22 Feb 2019 20:50:58 +0000 Subject: [PATCH 080/171] Add vendor and product arguments to atmega32a_program.py --- util/atmega32a_program.py | 43 ++++++++++++++++++++++----------------- 1 file changed, 24 insertions(+), 19 deletions(-) diff --git a/util/atmega32a_program.py b/util/atmega32a_program.py index b777b911066..324614aff65 100755 --- a/util/atmega32a_program.py +++ b/util/atmega32a_program.py @@ -19,18 +19,19 @@ from __future__ import print_function import os import sys import time +import argparse import usb -def checkForKeyboardInNormalMode(): +def check_keyboard_normal_mode(vendor, product): """Returns a device if a ps2avrGB device in normal made (that is in keyboard mode) or None if it is not found.""" - return usb.core.find(idVendor=0x20A0, idProduct=0x422D) + return usb.core.find(idVendor=vendor, idProduct=product) -def checkForKeyboardInBootloaderMode(): +def check_keyboard_bootloader_mode(): """Returns True if a ps2avrGB device in bootloader (flashable) mode is found and False otherwise.""" return (usb.core.find(idVendor=0x16c0, idProduct=0x05df) is not None) -def flashKeyboard(firmware_file): +def flash_keyboard(firmware_file): """Calls bootloadHID to flash the given file to the device.""" print('Flashing firmware to device ...') if os.system('bootloadHID -r "%s"' % firmware_file) == 0: @@ -38,24 +39,24 @@ def flashKeyboard(firmware_file): else: print('\nbootloadHID returned an error.') -def printDeviceInfo(dev): +def print_device_info(dev): """Prints all infos for a given USB device""" print('Device Information:') - print(' idVendor: %d (0x%04x)' % (dev.idVendor, dev.idVendor)) - print(' idProduct: %d (0x%04x)' % (dev.idProduct, dev.idProduct)) + print(' idVendor: %d (0x%02x)' % (dev.idVendor, dev.idVendor)) + print(' idProduct: %d (0x%02x)' % (dev.idProduct, dev.idProduct)) print('Manufacturer: %s' % (dev.iManufacturer)) print('Serial: %s' % (dev.iSerialNumber)) print('Product: %s' % (dev.iProduct), end='\n\n') -def sendDeviceToBootloaderMode(dev): +def send_device_to_bootloader_mode(dev): """Tries to send a given ps2avrGB keyboard to bootloader mode to allow flashing.""" try: dev.set_configuration() request_type = usb.util.build_request_type( - usb.util.CTRL_OUT, - usb.util.CTRL_TYPE_CLASS, - usb.util.CTRL_RECIPIENT_DEVICE) + usb.util.CTRL_OUT, + usb.util.CTRL_TYPE_CLASS, + usb.util.CTRL_RECIPIENT_DEVICE) USBRQ_HID_SET_REPORT = 0x09 HID_REPORT_OPTION = 0x0301 @@ -65,16 +66,21 @@ def sendDeviceToBootloaderMode(dev): # for some reason I keep getting USBError, but it works! pass +def auto_int(value): + """Helper for argparse to enable auto base detection""" + return int(value, 0) -if len(sys.argv) < 2: - print('Usage: %s ' % sys.argv[0]) - sys.exit(1) +parser = argparse.ArgumentParser(description='Flash bootloadHID device') +parser.add_argument('--vendor', type=auto_int, default=0x20A0, help='Non bootloader idVendor to search for (default: 0x%(default)02x)') +parser.add_argument('--product', type=auto_int, default=0x422D, help='Non bootloader idProduct to search for (default: 0x%(default)02x)') +parser.add_argument('firmware_hex', type=argparse.FileType('r'), help='Firmware hex file to flash') +args = parser.parse_args() -kb = checkForKeyboardInNormalMode() +kb = check_keyboard_normal_mode(args.vendor, args.product) if kb is not None: print('Found a keyboard in normal mode. Attempting to send it to bootloader mode ...', end='') - sendDeviceToBootloaderMode(kb) + send_device_to_bootloader_mode(kb) print(' done.') print("Hint: If your keyboard can't be set to bootloader mode automatically, plug it in while pressing the bootloader key to do so manually.") print(" You can find more infos about this here: https://github.com/qmk/qmk_firmware/tree/master/keyboards/ps2avrGB#setting-the-board-to-bootloader-mode") @@ -84,9 +90,9 @@ found = False for attempt in range(1, attempts + 1): print("Searching for keyboard in bootloader mode (%i/%i) ... " % (attempt, attempts), end='') - if checkForKeyboardInBootloaderMode(): + if check_keyboard_bootloader_mode(): print('Found', end='\n\n') - flashKeyboard(sys.argv[1]) + flash_keyboard(args.firmware_hex.name) found = True break else: @@ -102,4 +108,3 @@ for attempt in range(1, attempts + 1): if not found: print("Couldn't find a flashable keyboard. Aborting.") sys.exit(2) - From 6832a067ef8966993319f07f34a4a08b39c2ded4 Mon Sep 17 00:00:00 2001 From: zvecr Date: Fri, 22 Feb 2019 21:10:16 +0000 Subject: [PATCH 081/171] Add vendor and product arguments to atmega32a_program.py - fix hex print --- util/atmega32a_program.py | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/util/atmega32a_program.py b/util/atmega32a_program.py index 324614aff65..9438c7e779b 100755 --- a/util/atmega32a_program.py +++ b/util/atmega32a_program.py @@ -42,8 +42,8 @@ def flash_keyboard(firmware_file): def print_device_info(dev): """Prints all infos for a given USB device""" print('Device Information:') - print(' idVendor: %d (0x%02x)' % (dev.idVendor, dev.idVendor)) - print(' idProduct: %d (0x%02x)' % (dev.idProduct, dev.idProduct)) + print(' idVendor: %d (0x%04x)' % (dev.idVendor, dev.idVendor)) + print(' idProduct: %d (0x%04x)' % (dev.idProduct, dev.idProduct)) print('Manufacturer: %s' % (dev.iManufacturer)) print('Serial: %s' % (dev.iSerialNumber)) print('Product: %s' % (dev.iProduct), end='\n\n') @@ -71,8 +71,8 @@ def auto_int(value): return int(value, 0) parser = argparse.ArgumentParser(description='Flash bootloadHID device') -parser.add_argument('--vendor', type=auto_int, default=0x20A0, help='Non bootloader idVendor to search for (default: 0x%(default)02x)') -parser.add_argument('--product', type=auto_int, default=0x422D, help='Non bootloader idProduct to search for (default: 0x%(default)02x)') +parser.add_argument('--vendor', type=auto_int, default=0x20A0, help='Non bootloader idVendor to search for (default: 0x%(default)04x)') +parser.add_argument('--product', type=auto_int, default=0x422D, help='Non bootloader idProduct to search for (default: 0x%(default)04x)') parser.add_argument('firmware_hex', type=argparse.FileType('r'), help='Firmware hex file to flash') args = parser.parse_args() From a2090d5e863a580d71e29de104844d5fc4fbe036 Mon Sep 17 00:00:00 2001 From: Drashna Jaelre Date: Tue, 2 Oct 2018 11:08:41 -0700 Subject: [PATCH 082/171] Add AltGr/RALT support to Send String --- quantum/quantum.c | 43 ++++++++++++++++++++++++++++++++++--------- 1 file changed, 34 insertions(+), 9 deletions(-) diff --git a/quantum/quantum.c b/quantum/quantum.c index a4ccccd00dd..0fe918b3651 100644 --- a/quantum/quantum.c +++ b/quantum/quantum.c @@ -850,6 +850,26 @@ const bool ascii_to_shift_lut[0x80] PROGMEM = { 0, 0, 0, 1, 1, 1, 1, 0 }; +__attribute__ ((weak)) +const bool ascii_to_alt_lut[0x80] PROGMEM = { + 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0 +}; + __attribute__ ((weak)) const uint8_t ascii_to_keycode_lut[0x80] PROGMEM = { 0, 0, 0, 0, 0, 0, 0, 0, @@ -932,16 +952,21 @@ void send_string_with_delay_P(const char *str, uint8_t interval) { void send_char(char ascii_code) { uint8_t keycode; + bool is_shifted; + bool is_alted; + keycode = pgm_read_byte(&ascii_to_keycode_lut[(uint8_t)ascii_code]); - if (pgm_read_byte(&ascii_to_shift_lut[(uint8_t)ascii_code])) { - register_code(KC_LSFT); - register_code(keycode); - unregister_code(keycode); - unregister_code(KC_LSFT); - } else { - register_code(keycode); - unregister_code(keycode); - } + if (pgm_read_byte(&ascii_to_shift_lut[(uint8_t)ascii_code])) { is_shifted = true; } else { is_shifted = false; } + if (pgm_read_byte(&ascii_to_alt_lut[(uint8_t)ascii_code])) { is_alted = true; } else { is_alted = false; } + + if (is_shifted) { register_code(KC_LSFT); } + if (is_alted) { register_code(KC_RALT); } + + register_code(keycode); + unregister_code(keycode); + + if (is_alted) { unregister_code(KC_RALT); } + if (is_shifted) { unregister_code(KC_LSFT); } } void set_single_persistent_default_layer(uint8_t default_layer) { From 7148c0b10c298af12172231e79c0cda1c1f76f04 Mon Sep 17 00:00:00 2001 From: Drashna Jaelre Date: Sun, 17 Feb 2019 08:58:02 -0800 Subject: [PATCH 083/171] Clean up some of the code --- quantum/quantum.c | 5 ++--- quantum/quantum.h | 1 + 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/quantum/quantum.c b/quantum/quantum.c index 0fe918b3651..7038228f739 100644 --- a/quantum/quantum.c +++ b/quantum/quantum.c @@ -957,13 +957,12 @@ void send_char(char ascii_code) { keycode = pgm_read_byte(&ascii_to_keycode_lut[(uint8_t)ascii_code]); if (pgm_read_byte(&ascii_to_shift_lut[(uint8_t)ascii_code])) { is_shifted = true; } else { is_shifted = false; } - if (pgm_read_byte(&ascii_to_alt_lut[(uint8_t)ascii_code])) { is_alted = true; } else { is_alted = false; } + if (pgm_read_byte(&ascii_to_alt_lut[(uint8_t)ascii_code])) { is_alted = true; } else { is_alted = false; } if (is_shifted) { register_code(KC_LSFT); } if (is_alted) { register_code(KC_RALT); } - register_code(keycode); - unregister_code(keycode); + tap_code(keycode); if (is_alted) { unregister_code(KC_RALT); } if (is_shifted) { unregister_code(KC_LSFT); } diff --git a/quantum/quantum.h b/quantum/quantum.h index c7fce9a0f60..f7b278cefd7 100644 --- a/quantum/quantum.h +++ b/quantum/quantum.h @@ -206,6 +206,7 @@ extern uint32_t default_layer_state; #define SEND_STRING(str) send_string_P(PSTR(str)) extern const bool ascii_to_shift_lut[0x80]; +extern const bool ascii_to_alt_lut[0x80]; extern const uint8_t ascii_to_keycode_lut[0x80]; void send_string(const char *str); void send_string_with_delay(const char *str, uint8_t interval); From e88530af792ce68ebd4d5fd02a843837396daec9 Mon Sep 17 00:00:00 2001 From: Drashna Jaelre Date: Sat, 23 Mar 2019 11:25:26 -0700 Subject: [PATCH 084/171] Make send_char multilined for readaability So future us' will thaank us --- quantum/quantum.c | 28 ++++++++++++++++++++-------- 1 file changed, 20 insertions(+), 8 deletions(-) diff --git a/quantum/quantum.c b/quantum/quantum.c index 7038228f739..3677424bbdd 100644 --- a/quantum/quantum.c +++ b/quantum/quantum.c @@ -952,20 +952,32 @@ void send_string_with_delay_P(const char *str, uint8_t interval) { void send_char(char ascii_code) { uint8_t keycode; - bool is_shifted; - bool is_alted; + bool is_shifted = false; + bool is_alted = false; keycode = pgm_read_byte(&ascii_to_keycode_lut[(uint8_t)ascii_code]); - if (pgm_read_byte(&ascii_to_shift_lut[(uint8_t)ascii_code])) { is_shifted = true; } else { is_shifted = false; } - if (pgm_read_byte(&ascii_to_alt_lut[(uint8_t)ascii_code])) { is_alted = true; } else { is_alted = false; } + if (pgm_read_byte(&ascii_to_shift_lut[(uint8_t)ascii_code])) { + is_shifted = true; + } + if (pgm_read_byte(&ascii_to_alt_lut[(uint8_t)ascii_code])) { + is_alted = true; + } - if (is_shifted) { register_code(KC_LSFT); } - if (is_alted) { register_code(KC_RALT); } + if (is_shifted) { + register_code(KC_LSFT); + } + if (is_alted) { + register_code(KC_RALT); + } tap_code(keycode); - if (is_alted) { unregister_code(KC_RALT); } - if (is_shifted) { unregister_code(KC_LSFT); } + if (is_alted) { + unregister_code(KC_RALT); + } + if (is_shifted) { + unregister_code(KC_LSFT); + } } void set_single_persistent_default_layer(uint8_t default_layer) { From 1d7a06a0a25167ff49702bab39e7e4e60dc6319f Mon Sep 17 00:00:00 2001 From: Drashna Jaelre Date: Thu, 11 Apr 2019 15:12:26 -0700 Subject: [PATCH 085/171] Cleanup code --- quantum/quantum.c | 16 +++------------- 1 file changed, 3 insertions(+), 13 deletions(-) diff --git a/quantum/quantum.c b/quantum/quantum.c index 3677424bbdd..8ac3a57dca4 100644 --- a/quantum/quantum.c +++ b/quantum/quantum.c @@ -951,17 +951,9 @@ void send_string_with_delay_P(const char *str, uint8_t interval) { } void send_char(char ascii_code) { - uint8_t keycode; - bool is_shifted = false; - bool is_alted = false; - - keycode = pgm_read_byte(&ascii_to_keycode_lut[(uint8_t)ascii_code]); - if (pgm_read_byte(&ascii_to_shift_lut[(uint8_t)ascii_code])) { - is_shifted = true; - } - if (pgm_read_byte(&ascii_to_alt_lut[(uint8_t)ascii_code])) { - is_alted = true; - } + uint8_t keycode = pgm_read_byte(&ascii_to_keycode_lut[(uint8_t)ascii_code]); + bool is_shifted = pgm_read_byte(&ascii_to_shift_lut[(uint8_t)ascii_code]); + bool is_alted = pgm_read_byte(&ascii_to_alt_lut[(uint8_t)ascii_code]); if (is_shifted) { register_code(KC_LSFT); @@ -969,9 +961,7 @@ void send_char(char ascii_code) { if (is_alted) { register_code(KC_RALT); } - tap_code(keycode); - if (is_alted) { unregister_code(KC_RALT); } From a6857d18e14322fb75bb168ab13fbea0ff631324 Mon Sep 17 00:00:00 2001 From: Drashna Jaelre Date: Thu, 11 Apr 2019 15:21:45 -0700 Subject: [PATCH 086/171] Change table names --- quantum/quantum.c | 8 ++++---- quantum/quantum.h | 2 +- 2 files changed, 5 insertions(+), 5 deletions(-) diff --git a/quantum/quantum.c b/quantum/quantum.c index 8ac3a57dca4..f5e3b63f8d2 100644 --- a/quantum/quantum.c +++ b/quantum/quantum.c @@ -851,7 +851,7 @@ const bool ascii_to_shift_lut[0x80] PROGMEM = { }; __attribute__ ((weak)) -const bool ascii_to_alt_lut[0x80] PROGMEM = { +const bool ascii_to_altgr_lut[0x80] PROGMEM = { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, @@ -953,16 +953,16 @@ void send_string_with_delay_P(const char *str, uint8_t interval) { void send_char(char ascii_code) { uint8_t keycode = pgm_read_byte(&ascii_to_keycode_lut[(uint8_t)ascii_code]); bool is_shifted = pgm_read_byte(&ascii_to_shift_lut[(uint8_t)ascii_code]); - bool is_alted = pgm_read_byte(&ascii_to_alt_lut[(uint8_t)ascii_code]); + bool is_altgred = pgm_read_byte(&ascii_to_altgr_lut[(uint8_t)ascii_code]); if (is_shifted) { register_code(KC_LSFT); } - if (is_alted) { + if (is_altgred) { register_code(KC_RALT); } tap_code(keycode); - if (is_alted) { + if (is_altgred) { unregister_code(KC_RALT); } if (is_shifted) { diff --git a/quantum/quantum.h b/quantum/quantum.h index f7b278cefd7..e2f467125ee 100644 --- a/quantum/quantum.h +++ b/quantum/quantum.h @@ -206,7 +206,7 @@ extern uint32_t default_layer_state; #define SEND_STRING(str) send_string_P(PSTR(str)) extern const bool ascii_to_shift_lut[0x80]; -extern const bool ascii_to_alt_lut[0x80]; +extern const bool ascii_to_altgr_lut[0x80]; extern const uint8_t ascii_to_keycode_lut[0x80]; void send_string(const char *str); void send_string_with_delay(const char *str, uint8_t interval); From b090fe15d703d454b22bea58284411e6afcab386 Mon Sep 17 00:00:00 2001 From: noroadsleft Date: Mon, 4 Mar 2019 16:56:46 -0800 Subject: [PATCH 087/171] Fix Ergodone keyboard dimensions in info.json --- keyboards/ergodone/info.json | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/keyboards/ergodone/info.json b/keyboards/ergodone/info.json index 81c7e2afaa7..33128758ac3 100644 --- a/keyboards/ergodone/info.json +++ b/keyboards/ergodone/info.json @@ -1,8 +1,8 @@ { "keyboard_name": "Ergodone", "maintainer": "Yu He", - "width": 19.5, - "height": 9.375, + "width": 17, + "height": 8, "layouts": { "LAYOUT_ergodox": { From 1529f0b2d7eac3a3f50465c85eec4cb63a41b8e6 Mon Sep 17 00:00:00 2001 From: noroadsleft Date: Wed, 20 Mar 2019 13:53:58 -0700 Subject: [PATCH 088/171] Fix handwired/prime_exl keyboard dimensions in info.json --- keyboards/handwired/prime_exl/info.json | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/keyboards/handwired/prime_exl/info.json b/keyboards/handwired/prime_exl/info.json index edab7886079..65b08d61517 100644 --- a/keyboards/handwired/prime_exl/info.json +++ b/keyboards/handwired/prime_exl/info.json @@ -2,8 +2,8 @@ "keyboard_name": "Prime_EXL", "url": "https://www.primekb.com", "maintainer": "holtenc", - "width": 18, - "height": 5, + "width": 20.75, + "height": 6, "layouts": { "LAYOUT": { "layout": [{"x":0,"y":0,"w":1,"h":1}, {"x":1,"y":0,"w":1,"h":1}, {"x":2,"y":0,"w":1,"h":1}, {"x":3,"y":0,"w":1,"h":1}, {"x":4,"y":0,"w":1,"h":1}, {"x":5,"y":0,"w":1,"h":1}, {"x":6.5,"y":0,"w":1,"h":1}, {"x":7.5,"y":0,"w":1,"h":1}, {"x":8.5,"y":0,"w":1,"h":1}, {"x":9.5,"y":0,"w":1,"h":1}, {"x":10.5,"y":0,"w":1,"h":1}, {"x":11.5,"y":0,"w":1,"h":1}, {"x":13.75,"y":0,"w":1,"h":1}, {"x":14.75,"y":0,"w":1,"h":1}, {"x":15.75,"y":0,"w":1,"h":1}, {"x":16.75,"y":0,"w":1,"h":1}, {"x":17.75,"y":0,"w":1,"h":1}, {"x":18.75,"y":0,"w":2,"h":1}, {"x":0,"y":1,"w":1,"h":1}, {"x":1,"y":1,"w":1,"h":1}, {"x":2,"y":1,"w":1,"h":1}, {"x":3,"y":1,"w":1,"h":1}, {"x":4,"y":1,"w":1,"h":1}, {"x":5,"y":1,"w":1,"h":1}, {"x":6.5,"y":1,"w":1.26,"h":1}, {"x":7.75,"y":1,"w":1,"h":1}, {"x":8.75,"y":1,"w":1,"h":1}, {"x":9.75,"y":1,"w":1,"h":1}, {"x":10.75,"y":1,"w":1,"h":1}, {"x":11.75,"y":1,"w":1,"h":1}, {"x":14,"y":1,"w":1,"h":1}, {"x":15,"y":1,"w":1,"h":1}, {"x":16,"y":1,"w":1,"h":1}, {"x":17,"y":1,"w":1,"h":1}, {"x":18,"y":1,"w":1,"h":1}, {"x":19,"y":1,"w":1.75,"h":1}, {"x":0,"y":2,"w":1,"h":1}, {"x":1,"y":2,"w":1,"h":1}, {"x":2,"y":2,"w":1,"h":1}, {"x":3,"y":2,"w":1,"h":1}, {"x":4,"y":2,"w":1,"h":1}, {"x":5,"y":2,"w":1,"h":1}, {"x":6.5,"y":2,"w":1.75,"h":1}, {"x":8.25,"y":2,"w":1,"h":1}, {"x":9.25,"y":2,"w":1,"h":1}, {"x":10.25,"y":2,"w":1,"h":1}, {"x":11.25,"y":2,"w":1,"h":1}, {"x":12.25,"y":2,"w":1,"h":1}, {"x":13.5,"y":2,"w":1,"h":1}, {"x":14.5,"y":2,"w":1,"h":1}, {"x":15.5,"y":2,"w":1,"h":1}, {"x":16.5,"y":2,"w":1,"h":1}, {"x":17.5,"y":2,"w":1,"h":1}, {"x":18.5,"y":2,"w":1,"h":1}, {"x":19.5,"y":2,"w":1.25,"h":1}, {"x":0,"y":3,"w":1,"h":1}, {"x":1,"y":3,"w":1,"h":1}, {"x":2,"y":3,"w":1,"h":1}, {"x":3,"y":3,"w":1,"h":1}, {"x":4,"y":3,"w":1,"h":1}, {"x":5,"y":3,"w":1,"h":1}, {"x":6.5,"y":3,"w":1.25,"h":1}, {"x":7.75,"y":3,"w":1.25,"h":1}, {"x":9,"y":3,"w":1,"h":1}, {"x":10,"y":3,"w":1,"h":1}, {"x":11,"y":3,"w":2,"h":1}, {"x":13.5,"y":3,"w":2,"h":1}, {"x":15.5,"y":3,"w":1,"h":1}, {"x":16.5,"y":3,"w":1,"h":1}, {"x":17.5,"y":3,"w":1.5,"h":1}, {"x":19,"y":3,"w":1.5,"h":1}, {"x":0,"y":4,"w":1,"h":1}, {"x":1,"y":4,"w":1,"h":1}, {"x":2,"y":4,"w":1,"h":1}, {"x":3,"y":4,"w":1,"h":1}, {"x":4,"y":4,"w":1,"h":1}, {"x":5,"y":4,"w":1,"h":1}] From 75535cdfa3373c611fef1f4a9166d1b70a194021 Mon Sep 17 00:00:00 2001 From: noroadsleft Date: Wed, 20 Mar 2019 13:56:35 -0700 Subject: [PATCH 089/171] Fix KBDfans KBD4x keyboard dimensions in info.json --- keyboards/kbdfans/kbd4x/info.json | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/keyboards/kbdfans/kbd4x/info.json b/keyboards/kbdfans/kbd4x/info.json index f9952e79031..28883b265a0 100644 --- a/keyboards/kbdfans/kbd4x/info.json +++ b/keyboards/kbdfans/kbd4x/info.json @@ -2,7 +2,7 @@ "keyboard_name": "kbd4x", "url": "", "maintainer": "qmk", - "width": 14, + "width": 12, "height": 4, "layouts": { "LAYOUT_planck_mit": { From a206f3b7395627270682c814c04e249ccd8ff295 Mon Sep 17 00:00:00 2001 From: noroadsleft Date: Wed, 20 Mar 2019 13:58:25 -0700 Subject: [PATCH 090/171] Fix handwired/not_so_minidox keyboard dimensions in info.json --- keyboards/handwired/not_so_minidox/info.json | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/keyboards/handwired/not_so_minidox/info.json b/keyboards/handwired/not_so_minidox/info.json index 0222095024b..9c286eb1f9b 100644 --- a/keyboards/handwired/not_so_minidox/info.json +++ b/keyboards/handwired/not_so_minidox/info.json @@ -2,7 +2,7 @@ "keyboard_name": "Not So MiniDox", "url": "", "maintainer": "qmk", - "width": 12, + "width": 14, "height": 5.75, "layouts": { "LAYOUT": { From f19d13820604291092ea89c195e962963e72ebb1 Mon Sep 17 00:00:00 2001 From: noroadsleft Date: Wed, 20 Mar 2019 14:00:14 -0700 Subject: [PATCH 091/171] Fix Canoe keyboard dimensions in info.json --- keyboards/canoe/info.json | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/keyboards/canoe/info.json b/keyboards/canoe/info.json index fec60338af6..17bdacaa5db 100644 --- a/keyboards/canoe/info.json +++ b/keyboards/canoe/info.json @@ -2,7 +2,7 @@ "keyboard_name": "Canoe", "maintainer": "qmk", "url": "", - "height": 8, + "height": 6, "width": 15, "layouts": { "LAYOUT_iso": { From 7870000d892fa08ea6c9160cef493b5dcdf778b2 Mon Sep 17 00:00:00 2001 From: noroadsleft Date: Wed, 20 Mar 2019 14:01:44 -0700 Subject: [PATCH 092/171] Fix Clueboard Cluecard keyboard dimensions in info.json --- keyboards/clueboard/card/info.json | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/keyboards/clueboard/card/info.json b/keyboards/clueboard/card/info.json index 86dbb4faa7e..8dfa035996f 100644 --- a/keyboards/clueboard/card/info.json +++ b/keyboards/clueboard/card/info.json @@ -4,7 +4,7 @@ "url": "", "maintainer": "skullydazed", "width": 10, - "height": 7, + "height": 8, "layouts": { "LAYOUT": { "layout": [ From a20e59ac754ac4ecd24344e08ce2b50dedfcfdcc Mon Sep 17 00:00:00 2001 From: noroadsleft Date: Wed, 20 Mar 2019 14:02:55 -0700 Subject: [PATCH 093/171] Fix Corne (crkbd) keyboard dimensions in info.json --- keyboards/crkbd/info.json | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/keyboards/crkbd/info.json b/keyboards/crkbd/info.json index 45a0255c1ac..d7f6309043b 100644 --- a/keyboards/crkbd/info.json +++ b/keyboards/crkbd/info.json @@ -3,7 +3,7 @@ "url": "", "maintainer": "qmk", "width": 15, - "height": 4.5, + "height": 4.7, "layouts": { "LAYOUT": { "layout": [ From de6b56817709ad455f01a2255b387ccba47a0a67 Mon Sep 17 00:00:00 2001 From: noroadsleft Date: Wed, 20 Mar 2019 14:06:16 -0700 Subject: [PATCH 094/171] Fix Gergo keyboard dimensions in info.json --- keyboards/gergo/info.json | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/keyboards/gergo/info.json b/keyboards/gergo/info.json index 71dcca40fcd..cacbda42390 100644 --- a/keyboards/gergo/info.json +++ b/keyboards/gergo/info.json @@ -1,6 +1,6 @@ { "maintainer": "germ", - "height": 4.75, + "height": 5.75, "width": 19.5, "keyboard_name": "Gergo", "url": "http://gboards.ca", From 814118175b0bb5533b1b0030d1bdf787526283fc Mon Sep 17 00:00:00 2001 From: noroadsleft Date: Wed, 20 Mar 2019 14:08:48 -0700 Subject: [PATCH 095/171] Fix handwired/frenchdev keyboard dimensions in info.json --- keyboards/handwired/frenchdev/info.json | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/keyboards/handwired/frenchdev/info.json b/keyboards/handwired/frenchdev/info.json index 0f3c0a94fd3..28f09a3aa11 100644 --- a/keyboards/handwired/frenchdev/info.json +++ b/keyboards/handwired/frenchdev/info.json @@ -4,7 +4,7 @@ "maintainer": "qmk", "bootloader": "", "width": 20, - "height": 8, + "height": 9.5, "layouts": { "LAYOUT": { "layout": [ From 2485f73f06459cf26b1e7f5665d90e272f9145d9 Mon Sep 17 00:00:00 2001 From: noroadsleft Date: Wed, 20 Mar 2019 14:09:43 -0700 Subject: [PATCH 096/171] Fix handwired/ortho5x13 keyboard dimensions in info.json --- keyboards/handwired/ortho5x13/info.json | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/keyboards/handwired/ortho5x13/info.json b/keyboards/handwired/ortho5x13/info.json index 15a65081a16..886bfe02893 100644 --- a/keyboards/handwired/ortho5x13/info.json +++ b/keyboards/handwired/ortho5x13/info.json @@ -3,7 +3,7 @@ "url": "", "maintainer": "qmk", "width": 13, - "height": 6, + "height": 5, "layouts": { "LAYOUT": { "layout": [ From eab6546fda6935466252abfd87e6a10c72c7177c Mon Sep 17 00:00:00 2001 From: noroadsleft Date: Wed, 20 Mar 2019 14:10:48 -0700 Subject: [PATCH 097/171] Fix handwired/promethium keyboard dimensions in info.json --- keyboards/handwired/promethium/info.json | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/keyboards/handwired/promethium/info.json b/keyboards/handwired/promethium/info.json index 2742ffa641b..7b2d43d6142 100644 --- a/keyboards/handwired/promethium/info.json +++ b/keyboards/handwired/promethium/info.json @@ -3,7 +3,7 @@ "url": "", "maintainer": "qmk", "width": 16, - "height": 5, + "height": 4.5, "layouts": { "LAYOUT": { "layout": [ From 8c87274e83853757833ef726c5b048789901b942 Mon Sep 17 00:00:00 2001 From: noroadsleft Date: Wed, 20 Mar 2019 14:14:57 -0700 Subject: [PATCH 098/171] Fix Speedo keyboard dimensions in info.json --- keyboards/speedo/info.json | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/keyboards/speedo/info.json b/keyboards/speedo/info.json index b0bb87b6e48..3f4b7b27997 100644 --- a/keyboards/speedo/info.json +++ b/keyboards/speedo/info.json @@ -4,7 +4,7 @@ "maintainer": "qmk", "bootloader": "", "width": 15, - "height": 6, + "height": 6.5, "layouts": { "LAYOUT": { "layout": [{"label":"k00", "x":0, "y":0.375}, {"label":"k01", "x":1, "y":0.375}, {"label":"k02", "x":2, "y":0.25}, {"label":"k03", "x":3, "y":0}, {"label":"k04", "x":4, "y":0.25}, {"label":"k05", "x":5, "y":0.5}, {"label":"k06", "x":9, "y":0.5}, {"label":"k07", "x":10, "y":0.25}, {"label":"k08", "x":11, "y":0}, {"label":"k09", "x":12, "y":0.25}, {"label":"k10", "x":13, "y":0.375}, {"label":"k11", "x":14, "y":0.375}, {"label":"k12", "x":0, "y":1.375}, {"label":"k13", "x":1, "y":1.375}, {"label":"k14", "x":2, "y":1.25}, {"label":"k15", "x":3, "y":1}, {"label":"k16", "x":4, "y":1.25}, {"label":"k17", "x":5, "y":1.5}, {"label":"k18", "x":7, "y":2}, {"label":"k19", "x":9, "y":1.5}, {"label":"k20", "x":10, "y":1.25}, {"label":"k21", "x":11, "y":1}, {"label":"k22", "x":12, "y":1.25}, {"label":"k23", "x":13, "y":1.375}, {"label":"k24", "x":14, "y":1.375}, {"label":"k25", "x":0, "y":2.375}, {"label":"k26", "x":1, "y":2.375}, {"label":"k27", "x":2, "y":2.25}, {"label":"k28", "x":3, "y":2}, {"label":"k29", "x":4, "y":2.25}, {"label":"k30", "x":5, "y":2.5}, {"label":"k31", "x":7, "y":3}, {"label":"k32", "x":9, "y":2.5}, {"label":"k33", "x":10, "y":2.25}, {"label":"k34", "x":11, "y":2}, {"label":"k35", "x":12, "y":2.25}, {"label":"k36", "x":13, "y":2.375}, {"label":"k37", "x":14, "y":2.375}, {"label":"k38", "x":0, "y":3.375}, {"label":"k39", "x":1, "y":3.375}, {"label":"k40", "x":2, "y":3.25}, {"label":"k41", "x":3, "y":3}, {"label":"k42", "x":4, "y":3.25}, {"label":"k43", "x":5, "y":3.5}, {"label":"k44", "x":6.5, "y":4}, {"label":"k45", "x":7.5, "y":4}, {"label":"k46", "x":9, "y":3.5}, {"label":"k47", "x":10, "y":3.25}, {"label":"k48", "x":11, "y":3}, {"label":"k49", "x":12, "y":3.25}, {"label":"k50", "x":13, "y":3.375}, {"label":"k51", "x":14, "y":3.375}, {"label":"k52", "x":0, "y":4.375}, {"label":"k53", "x":1, "y":4.375}, {"label":"k54", "x":2, "y":4.25}, {"label":"k55", "x":3, "y":4}, {"label":"k56", "x":4, "y":4.25}, {"label":"k57", "x":5.5, "y":5}, {"label":"k58", "x":6.5, "y":5.5}, {"label":"k59", "x":7.5, "y":5.5}, {"label":"k60", "x":8.5, "y":5}, {"label":"k61", "x":10, "y":4.25}, {"label":"k62", "x":11, "y":4}, {"label":"k63", "x":12, "y":4.25}, {"label":"k64", "x":13, "y":4.375}, {"label":"k65", "x":14, "y":4.375}] From 8af1d3ad86ef34b3acc7c93f0e14baf2abd94184 Mon Sep 17 00:00:00 2001 From: noroadsleft Date: Wed, 20 Mar 2019 14:16:19 -0700 Subject: [PATCH 099/171] Fix XD87 keyboard dimensions in info.json --- keyboards/xd87/info.json | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/keyboards/xd87/info.json b/keyboards/xd87/info.json index 3837358cd32..488f3192753 100644 --- a/keyboards/xd87/info.json +++ b/keyboards/xd87/info.json @@ -3,7 +3,7 @@ "url": "", "maintainer": "qmk", "width": 18.25, - "height": 7.25, + "height": 6.25, "layouts": { "LAYOUT_all": { "layout": [ From 8f3063402da00c0b5542bee5894a91b7ffd78c65 Mon Sep 17 00:00:00 2001 From: noroadsleft Date: Wed, 20 Mar 2019 14:37:23 -0700 Subject: [PATCH 100/171] Fix Ergodox EZ keyboard dimensions in info.json --- keyboards/ergodox_ez/info.json | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/keyboards/ergodox_ez/info.json b/keyboards/ergodox_ez/info.json index 7470ab90683..6f7a941574b 100644 --- a/keyboards/ergodox_ez/info.json +++ b/keyboards/ergodox_ez/info.json @@ -2,8 +2,8 @@ "keyboard_name": "ErgoDox EZ", "url": "ergodox-ez.com", "maintainer": "erez", - "width": 19.5, - "height": 9.375, + "width": 17, + "height": 8, "layouts": { "LAYOUT_ergodox": { From 69f757c3a2d8f60bd4891832d7f368656b26303f Mon Sep 17 00:00:00 2001 From: noroadsleft Date: Wed, 20 Mar 2019 14:37:49 -0700 Subject: [PATCH 101/171] Fix Ergodox Infinity keyboard dimensions in info.json --- keyboards/ergodox_infinity/info.json | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/keyboards/ergodox_infinity/info.json b/keyboards/ergodox_infinity/info.json index a24c6b0a197..e70b2a19e70 100644 --- a/keyboards/ergodox_infinity/info.json +++ b/keyboards/ergodox_infinity/info.json @@ -1,7 +1,7 @@ { "keyboard_name": "Infinity Ergodox", - "width": 19.5, - "height": 9.375, + "width": 17, + "height": 8, "layouts": { "LAYOUT_ergodox": { "layout": [ From 165b1683c11d90d6c65ba3df10e330e911327c85 Mon Sep 17 00:00:00 2001 From: noroadsleft Date: Wed, 20 Mar 2019 15:00:41 -0700 Subject: [PATCH 102/171] Fix Keeb.io Iris keyboard dimensions in info.json --- keyboards/keebio/iris/info.json | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/keyboards/keebio/iris/info.json b/keyboards/keebio/iris/info.json index f7b017b97ac..37806975f8e 100644 --- a/keyboards/keebio/iris/info.json +++ b/keyboards/keebio/iris/info.json @@ -2,8 +2,8 @@ "keyboard_name": "Iris", "url": "https://keeb.io", "maintainer": "Keebio", - "width": 14.5, - "height": 5, + "width": 15, + "height": 5.75, "layouts": { "LAYOUT": { "layout": [ From 424c35910974868087cc01bf4e453381440bcee5 Mon Sep 17 00:00:00 2001 From: noroadsleft Date: Wed, 20 Mar 2019 15:08:45 -0700 Subject: [PATCH 103/171] Fix Orthodox keyboard dimensions in info.json (all revisions) --- keyboards/orthodox/rev1/info.json | 4 ++-- keyboards/orthodox/rev3/info.json | 4 ++-- keyboards/orthodox/rev3_teensy/info.json | 4 ++-- 3 files changed, 6 insertions(+), 6 deletions(-) diff --git a/keyboards/orthodox/rev1/info.json b/keyboards/orthodox/rev1/info.json index 0a8442cf4b1..83180aa15e5 100644 --- a/keyboards/orthodox/rev1/info.json +++ b/keyboards/orthodox/rev1/info.json @@ -1,8 +1,8 @@ { "keyboard_name": "Monkeebs Orthodox Rev.1", "maintainer": "drashna", - "width": 17, - "height": 17.24, + "width": 19, + "height": 5, "layouts": { "LAYOUT": { "layout": [ diff --git a/keyboards/orthodox/rev3/info.json b/keyboards/orthodox/rev3/info.json index 289169d72b7..c98c9f232d7 100644 --- a/keyboards/orthodox/rev3/info.json +++ b/keyboards/orthodox/rev3/info.json @@ -1,8 +1,8 @@ { "keyboard_name": "Monkeebs Orthodox Rev.3", "maintainer": "drashna", - "width": 17, - "height": 17.24, + "width": 19, + "height": 5, "layouts": { "LAYOUT": { "layout": [ diff --git a/keyboards/orthodox/rev3_teensy/info.json b/keyboards/orthodox/rev3_teensy/info.json index d578a413408..5781c08f8e2 100644 --- a/keyboards/orthodox/rev3_teensy/info.json +++ b/keyboards/orthodox/rev3_teensy/info.json @@ -1,8 +1,8 @@ { "keyboard_name": "Monkeebs Orthodox Rev.3 (Teensy)", "maintainer": "drashna", - "width": 17, - "height": 17.24, + "width": 19, + "height": 5, "layouts": { "LAYOUT": { "layout": [ From 58a04162a8c15bdacf3eef3a3a7a71cc216a6a05 Mon Sep 17 00:00:00 2001 From: noroadsleft Date: Wed, 20 Mar 2019 15:10:13 -0700 Subject: [PATCH 104/171] Fix Qwertyydox keyboard dimensions in info.json --- keyboards/qwertyydox/info.json | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/keyboards/qwertyydox/info.json b/keyboards/qwertyydox/info.json index 0b762388ec5..3dd6b3ec738 100644 --- a/keyboards/qwertyydox/info.json +++ b/keyboards/qwertyydox/info.json @@ -5,8 +5,8 @@ "url": "", "maintainer": "qmk", "processor": "atmega32u4", - "width": 14, - "height": 4, + "width": 16, + "height": 5, "layouts": { "LAYOUT": { "key_count": 53, From de161493c7cad991d0a78fb00784ef70204f88bc Mon Sep 17 00:00:00 2001 From: noroadsleft Date: Sat, 13 Apr 2019 12:06:15 -0700 Subject: [PATCH 105/171] Fix handwired/tradestation keyboard dimensions in info.json --- keyboards/handwired/tradestation/info.json | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/keyboards/handwired/tradestation/info.json b/keyboards/handwired/tradestation/info.json index e59c217cb70..233eb6282ec 100644 --- a/keyboards/handwired/tradestation/info.json +++ b/keyboards/handwired/tradestation/info.json @@ -3,7 +3,7 @@ "url": "", "maintainer": "Flehrad", "width": 4.375, - "height": 4.375, + "height": 4.5, "layouts": { "LAYOUT_tradestation": { "layout": [{"x":0, "y":0},{"x":1.125, "y":0},{"x":2.25, "y":0},{"x":3.375, "y":0},{"x":0, "y":1.1},{"x":1.125, "y":1.1},{"x":2.25, "y":1.1},{"x":3.375, "y":1.1},{"x":0, "y":2.25, "w":2},{"x":2.25, "y":2.25, "w":2},{"x":0, "y":3.5, "w":2},{"x":2.25, "y":3.5, "w":2}] From 61a7aebd1630b35e177dcd4e49694756593428a1 Mon Sep 17 00:00:00 2001 From: Jeremy Bernhardt Date: Sun, 14 Apr 2019 12:01:52 -0600 Subject: [PATCH 106/171] [Keyboard] Georgi FW updates (#5609) * Working on chording * Working on chording * Got layouts in order * Initial Georgi support * forgot to add keymaps * Updated readme * Update keyboards/georgi/keymaps/template/readme.md Co-Authored-By: germ * Update keyboards/georgi/georgi.h Co-Authored-By: germ * Update keyboards/georgi/keymaps/default/keymap.c Co-Authored-By: germ * Update keyboards/georgi/keymaps/default/keymap.c Co-Authored-By: germ * Update keyboards/georgi/rules.mk Co-Authored-By: germ * Update keyboards/georgi/rules.mk Co-Authored-By: germ * Update keyboards/georgi/matrix.c Co-Authored-By: germ * Update keyboards/georgi/georgi.c Co-Authored-By: germ * Update keyboards/georgi/georgi.c Co-Authored-By: germ * Update keyboards/georgi/rules.mk Co-Authored-By: germ * Update keyboards/georgi/keymaps/default/keymap.c Co-Authored-By: germ * Update keyboards/georgi/keymaps/template/keymap.c Co-Authored-By: germ * Update keyboards/georgi/matrix.c Co-Authored-By: germ * Disabled features, updated info * Update keyboards/georgi/config.h Co-Authored-By: germ * Update keyboards/georgi/config.h Co-Authored-By: germ * Fixed info.json * Split the number button and fixed gaming mode. * started work on history feature * Working history/multikeyfuckery * type * inital code reduction refactor * Got multikey patched up, optimizing for size * Forgot to remove stuff * fixed key repeat * Key repeat added. * Symshift locking * Midchord Sym shenanigans. * Added only QWERTY mode * Split out header * Added stickybits, minimal layour * Fixing user layout * Whitespace fixing * Fixing Version name --- keyboards/georgi/config.h | 6 +- keyboards/georgi/keymaps/default/keymap.c | 369 ++++++++-------- keyboards/georgi/keymaps/default/rules.mk | 32 +- keyboards/georgi/keymaps/minimal/keymap.c | 223 ++++++++++ keyboards/georgi/keymaps/minimal/readme.md | 11 + keyboards/georgi/keymaps/minimal/rules.mk | 41 ++ keyboards/georgi/keymaps/norman/keymap.c | 267 ++++++++++++ keyboards/georgi/keymaps/norman/readme.md | 11 + .../keymaps/{template => norman}/rules.mk | 26 +- keyboards/georgi/keymaps/template/keymap.c | 216 ---------- keyboards/georgi/keymaps/template/readme.md | 6 - keyboards/georgi/readme.md | 5 +- keyboards/georgi/rules.mk | 5 +- keyboards/georgi/sten.c | 406 +++++++++++++++++- keyboards/georgi/sten.h | 277 ++---------- keyboards/gergo/keymaps/default/rules.mk | 2 +- keyboards/gergo/keymaps/germ/keymap.c | 151 +++++++ keyboards/gergo/keymaps/germ/readme.md | 10 + keyboards/gergo/keymaps/germ/rules.mk | 36 ++ 19 files changed, 1426 insertions(+), 674 deletions(-) create mode 100644 keyboards/georgi/keymaps/minimal/keymap.c create mode 100644 keyboards/georgi/keymaps/minimal/readme.md create mode 100644 keyboards/georgi/keymaps/minimal/rules.mk create mode 100644 keyboards/georgi/keymaps/norman/keymap.c create mode 100644 keyboards/georgi/keymaps/norman/readme.md rename keyboards/georgi/keymaps/{template => norman}/rules.mk (61%) delete mode 100644 keyboards/georgi/keymaps/template/keymap.c delete mode 100644 keyboards/georgi/keymaps/template/readme.md create mode 100644 keyboards/gergo/keymaps/germ/keymap.c create mode 100644 keyboards/gergo/keymaps/germ/readme.md create mode 100644 keyboards/gergo/keymaps/germ/rules.mk diff --git a/keyboards/georgi/config.h b/keyboards/georgi/config.h index b35762fbcfc..30f07667e3a 100644 --- a/keyboards/georgi/config.h +++ b/keyboards/georgi/config.h @@ -23,15 +23,13 @@ along with this program. If not, see . /* Defaults */ -#define VERSION "Alpha 01: Ted " +#define VERSION "v1.0: Stenoknight" #define VERBOSE #define FORCE_NKRO -#define NO_ACTION_MACRO #define NO_ACTION_FUNCTION -#define NO_DEBUG #define NO_ACTION_ONESHOT -#define NO_ACTION_FUNCTION +#define NO_ACTION_MACRO /* USB Device descriptor parameter */ #define VENDOR_ID 0xFEED diff --git a/keyboards/georgi/keymaps/default/keymap.c b/keyboards/georgi/keymaps/default/keymap.c index c3d69eb8aa0..3a0edb8923f 100644 --- a/keyboards/georgi/keymaps/default/keymap.c +++ b/keyboards/georgi/keymaps/default/keymap.c @@ -1,4 +1,4 @@ -/* +/* * Good on you for modifying your layout, this is the most nonQMK layout you will come across * There are three modes, Steno (the default), QWERTY (Toggleable) and a Momentary symbol layer * @@ -15,215 +15,224 @@ #include "keymap_steno.h" #define IGNORE_MOD_TAP_INTERRUPT -int getKeymapCount(void); - // Proper Layers #define FUNCT (LSD | LK | LP | LH) #define MEDIA (LSD | LK | LW | LR) #define MOVE (ST1 | ST2) +// QMK Layers +#define STENO_LAYER 0 +#define GAMING 1 +#define GAMING_2 2 + /* Keyboard Layout * ,---------------------------------. ,------------------------------. * | FN | LSU | LFT | LP | LH | ST1 | | ST3 | RF | RP | RL | RT | RD | * |-----+-----+-----+----+----|-----| |-----|----+----+----+----+----| - * | PWR | LSD | LK | LW | LR | ST2 | | ST4 | RR | RG | RB | RS | RZ | + * | PWR | LSD | LK | LW | LR | ST2 | | ST4 | RR | BB | RG | RS | RZ | * `---------------------------------' `------------------------------' * ,---------------, .---------------. - * | NUM | LA | LO | | RE | RU | NUM | + * | LNO | LA | LO | | RE | RU | RNO | * `---------------' `---------------' */ -// YOU MUST ORDER THIS! -// P Will return from processing on the first match it finds. Therefore -// PJ Will run the requested action, remove the matched chord and continue -// -// First any chords that would conflict with PJs need to be checked, then PJs, lastly Ps. -// For all chords should be ordered by length in their section! +// Note: You can only use basic keycodes here! +// P() is just a wrapper to make your life easier. // // http://docs.gboards.ca -bool processQwerty(void) { - // Place P's that would be trashed by PJ's here - P( RT | RS | RD | RZ | NUM, SEND_STRING(VERSION); SEND_STRING(__DATE__)); - P( NUM | LA | LO | RE | RU, SEND(KC_MPLY)); - P( ST1 | ST2 | ST3 | ST4, SEND(KC_BSPC)); +uint32_t processQwerty(bool lookup) { + // Specials + P( RT | RS | RD | RZ | LNO, SEND_STRING(VERSION); SEND_STRING(__DATE__)); + P( LNO | RNO | LA | LO | RE | RU, SEND(KC_MPLY)); + P( LFT | LK | LP | LW, REPEAT()); + P( ST1 | ST2 | LW | ST4, SEND(KC_BSPC)); - // Thumb Chords - P( LA | LO | RE | RU, SEND(KC_CAPS)); - P( LA | RU, SEND(KC_ESC)); - PJ( LO | RE, SEND(KC_LCTL)); - PJ( NUM | LA | RU, SEND(KC_LCTL); SEND(KC_LSFT)); - PJ( NUM | LA | RE, SEND(KC_LCTL); SEND(KC_LSFT); SEND(KC_LALT)); - - // Mods - PJ( RT | RD | RS | RZ, SEND(KC_LGUI)); - PJ( RT | RD, SEND(KC_LCTL)); - PJ( RS | RZ, SEND(KC_LALT)); - PJ( LA | NUM, SEND(KC_LCTL)); - PJ( LA | LO, SEND(KC_LALT)); - PJ( LO, SEND(KC_LSFT)); + // Mouse Keys + P( LO | LSD | LK, CLICK_MOUSE(KC_MS_BTN2)); + P( LO | LR | LW, CLICK_MOUSE(KC_MS_BTN1)); - // Function Layer - P( FUNCT | RF | RR, SEND(KC_F5)); - P( FUNCT | RP | RB, SEND(KC_F6)); - P( FUNCT | RL | RG, SEND(KC_F7)); - P( FUNCT | RT | RS, SEND(KC_F8)); - P( FUNCT | RF, SEND(KC_F1)); - P( FUNCT | RP, SEND(KC_F2)); - P( FUNCT | RL, SEND(KC_F3)); - P( FUNCT | RT, SEND(KC_F4)); - P( FUNCT | RR, SEND(KC_F9)); - P( FUNCT | RG, SEND(KC_F10)); - P( FUNCT | RB, SEND(KC_F11)); - P( FUNCT | RS, SEND(KC_F12)); + // Thumb Chords + P( LA | LO | RE | RU, SEND(KC_CAPS)); + P( LA | RU, SEND(KC_ESC)); + P( LO | RE, SEND(KC_LCTL)); + P( LNO | RNO | LA | RU, SEND(KC_LCTL); SEND(KC_LSFT)); + P( LNO | LA | RE, SEND(KC_LCTL); SEND(KC_LSFT); SEND(KC_LALT)); - // Movement Layer - P( MOVE | RF, SEND(KC_LEFT)); - P( MOVE | RP, SEND(KC_DOWN)); - P( MOVE | RL, SEND(KC_UP)); - P( MOVE | RT, SEND(KC_RIGHT)); - P( MOVE | ST3, SEND(KC_PGUP)); - P( MOVE | ST4, SEND(KC_PGDN)); + // Mods + P( RT | RD | RS | RZ, SEND(KC_LGUI)); + P( RT | RD, SEND(KC_LCTL)); + P( RS | RZ, SEND(KC_LALT)); + P( LA | LNO, SEND(KC_LCTL)); + P( LA | LO, SEND(KC_LALT)); + P( LO, SEND(KC_LSFT)); - // Media Layer - P( MEDIA | RF, SEND(KC_MPRV)); - P( MEDIA | RP, SEND(KC_MPLY)); - P( MEDIA | RL, SEND(KC_MPLY)); - P( MEDIA | RT, SEND(KC_MNXT)); - P( MEDIA | RD, SEND(KC_VOLU)); - P( MEDIA | RZ, SEND(KC_VOLD)); - P( MEDIA | RS, SEND(KC_MUTE)); + // Function Layer + P( FUNCT | RF | RR, SEND(KC_F5)); + P( FUNCT | RP | RB, SEND(KC_F6)); + P( FUNCT | RL | RG, SEND(KC_F7)); + P( FUNCT | RT | RS, SEND(KC_F8)); + P( FUNCT | RF, SEND(KC_F1)); + P( FUNCT | RP, SEND(KC_F2)); + P( FUNCT | RL, SEND(KC_F3)); + P( FUNCT | RT, SEND(KC_F4)); + P( FUNCT | RR, SEND(KC_F9)); + P( FUNCT | RG, SEND(KC_F10)); + P( FUNCT | RB, SEND(KC_F11)); + P( FUNCT | RS, SEND(KC_F12)); - // Mouse Keys - P( LP | LH, clickMouse(KC_MS_BTN1)); - P( LW | LR, clickMouse(KC_MS_BTN2)); - - // Number Row - P( NUM | LSU, SEND(KC_1)); - P( NUM | LFT, SEND(KC_2)); - P( NUM | LP, SEND(KC_3)); - P( NUM | LH, SEND(KC_4)); - P( NUM | ST1, SEND(KC_5)); - P( NUM | ST3, SEND(KC_6)); - P( NUM | RF, SEND(KC_7)); - P( NUM | RP, SEND(KC_8)); - P( NUM | RL, SEND(KC_9)); - P( NUM | RT, SEND(KC_0)); - P( NUM | LA, SEND(KC_5)); - P( NUM | RT, SEND(KC_0)); - - // Specials - P( LA | NUM, SEND(KC_ESC)); - P( RU | NUM, SEND(KC_TAB)); - P( RE | RU, SEND(KC_BSPC)); - P( RD | RZ, SEND(KC_ENT)); - P( RE, SEND(KC_ENT)); - P( RD, SEND(KC_BSPC)); - P( NUM, SEND(KC_BSPC)); - P( LA, SEND(KC_SPC)); - P( RU, SEND(KC_SPC)); - P( RZ, SEND(KC_ESC)); + // Movement Layer + P( MOVE | RF, SEND(KC_LEFT)); + P( MOVE | RP, SEND(KC_DOWN)); + P( MOVE | RL, SEND(KC_UP)); + P( MOVE | RT, SEND(KC_RIGHT)); + P( MOVE | ST3, SEND(KC_PGUP)); + P( MOVE | ST4, SEND(KC_PGDN)); - // Letters - P( LSU | LSD, SEND(KC_A)); - P( LFT | LK, SEND(KC_S)); - P( LP | LW, SEND(KC_D)); - P( LH | LR, SEND(KC_F)); - P( ST1 | ST2, SEND(KC_G)); - P( ST3 | ST4, SEND(KC_H)); - P( RF | RR, SEND(KC_J)); - P( RT | RS, SEND(KC_SCLN)) - P( RG | RL, SEND(KC_L)); - P( RP | RB, SEND(KC_K)); - P( LSU, SEND(KC_Q)); - P( LSD, SEND(KC_Z)); - P( LFT, SEND(KC_W)); - P( LK, SEND(KC_X)); - P( LP, SEND(KC_E)); - P( LW, SEND(KC_C)); - P( LH, SEND(KC_R)); - P( LR, SEND(KC_V)); - P( ST1, SEND(KC_T)); - P( ST2, SEND(KC_B)); - P( ST3, SEND(KC_Y)); - P( ST4, SEND(KC_N)); - P( RF, SEND(KC_U)); - P( RR, SEND(KC_M)); - P( RP, SEND(KC_I)); - P( RB, SEND(KC_COMM)); - P( RL, SEND(KC_O)); - P( RG, SEND(KC_DOT)); - P( RT, SEND(KC_P)); - P( RS, SEND(KC_SLSH)); + // Media Layer + P( MEDIA | RF, SEND(KC_MPRV)); + P( MEDIA | RP, SEND(KC_MPLY)); + P( MEDIA | RL, SEND(KC_MPLY)); + P( MEDIA | RT, SEND(KC_MNXT)); + P( MEDIA | RD, SEND(KC_VOLU)); + P( MEDIA | RZ, SEND(KC_VOLD)); + P( MEDIA | RS, SEND(KC_MUTE)); - // Symbols and Numbers - P( PWR | RE | RU, SEND(KC_ENT)); - P( PWR | LA | LO, SEND(KC_SPC)); - P( PWR | LP | LW, SEND(KC_LSFT); SEND(KC_9)); // ( - P( PWR | LH | LR, SEND(KC_LSFT); SEND(KC_0)); // ) - P( PWR | ST1 | ST2, SEND(KC_GRV)); // ` - P( PWR | RD | RZ, SEND(KC_ESC)); - P( PWR | LSU | LSD, SEND(KC_LSFT); SEND(KC_3)); // # - P( PWR | LFT | LK, SEND(KC_LSFT); SEND(KC_4)); // $ - P( PWR | LSU, SEND(KC_LSFT); SEND(KC_1)); // ! - P( PWR | LSD, SEND(KC_LSFT); SEND(KC_5)); // % - P( PWR | LFT, SEND(KC_LSFT); SEND(KC_2)); // @ - P( PWR | LK, SEND(KC_LSFT); SEND(KC_6)); // ^ - P( PWR | LP, SEND(KC_LSFT); SEND(KC_LBRC)); // { - P( PWR | LW, SEND(KC_LBRC)); - P( PWR | LH, SEND(KC_LSFT); SEND(KC_RBRC)); // } - P( PWR | LR, SEND(KC_RBRC)); - P( PWR | ST1, SEND(KC_LSFT); SEND(KC_BSLS)); // | - P( PWR | ST2, SEND(KC_LSFT); SEND(KC_GRV)); // ~ - P( PWR | ST3, SEND(KC_QUOT)); - P( PWR | ST4, SEND(KC_LSFT); SEND(KC_QUOT)); // " - P( PWR | RF, SEND(KC_KP_PLUS)); - P( PWR | RR, SEND(KC_LSFT); SEND(KC_7)); // & - P( PWR | RP, SEND(KC_MINS)); - P( PWR | RB, SEND(KC_EQL)); - P( PWR | RL, SEND(KC_SLSH)); - P( PWR | RG, SEND(KC_COMM)); - P( PWR | RT, SEND(KC_PAST)); - P( PWR | RS, SEND(KC_DOT)); - P( PWR | RD, SEND(KC_TAB)); - P( PWR | LA, SEND(KC_SCLN)); - P( PWR | LO, SEND(KC_SLSH)); - P( PWR | RE, SEND(KC_SCLN)); - P( PWR | RU, SEND(KC_SLSH)); + // Number Row, Left + P( LNO | LSU, SEND(KC_1)); + P( LNO | LFT, SEND(KC_2)); + P( LNO | LP, SEND(KC_3)); + P( LNO | LH, SEND(KC_4)); + P( LNO | ST1, SEND(KC_5)); + P( LNO | ST3, SEND(KC_6)); + P( LNO | RF, SEND(KC_7)); + P( LNO | RP, SEND(KC_8)); + P( LNO | RL, SEND(KC_9)); + P( LNO | RT, SEND(KC_0)); + // Number Row, Right + P( RNO | LSU, SEND(KC_1)); + P( RNO | LFT, SEND(KC_2)); + P( RNO | LP, SEND(KC_3)); + P( RNO | LH, SEND(KC_4)); + P( RNO | ST1, SEND(KC_5)); + P( RNO | ST3, SEND(KC_6)); + P( RNO | RF, SEND(KC_7)); + P( RNO | RP, SEND(KC_8)); + P( RNO | RL, SEND(KC_9)); + P( RNO | RT, SEND(KC_0)); + P( RNO | LA, SEND(KC_5)); - // If we make here, send as a steno chord - // If plover is running we can hook that host side - return false; + // Specials + P( RU | RNO, SEND(KC_TAB)); + P( RE | RU, SEND(KC_BSPC)); + P( RD | RZ, SEND(KC_ENT)); + P( RE, SEND(KC_ENT)); + P( RD, SEND(KC_BSPC)); + P( LNO, SEND(KC_BSPC)); + P( RNO, SEND(KC_BSPC)); + P( LA, SEND(KC_SPC)); + P( RU, SEND(KC_SPC)); + P( RZ, SEND(KC_ESC)); + + // Symbols and Numbers + P( PWR | RE | RU, SEND(KC_ENT)); + P( PWR | LA | LO, SEND(KC_SPC)); + P( PWR | LP | LW, SEND(KC_LSFT); SEND(KC_9)); // ( + P( PWR | LH | LR, SEND(KC_LSFT); SEND(KC_0)); // ) + P( PWR | ST1 | ST2, SEND(KC_GRV)); // ` + P( PWR | RD | RZ, SEND(KC_ESC)); + P( PWR | LSU | LSD, SEND(KC_LSFT); SEND(KC_3)); // # + P( PWR | LFT | LK, SEND(KC_LSFT); SEND(KC_4)); // $ + P( PWR | LSU, SEND(KC_LSFT); SEND(KC_1)); // ! + P( PWR | LSD, SEND(KC_LSFT); SEND(KC_5)); // % + P( PWR | LFT, SEND(KC_LSFT); SEND(KC_2)); // @ + P( PWR | LK, SEND(KC_LSFT); SEND(KC_6)); // ^ + P( PWR | LP, SEND(KC_LSFT); SEND(KC_LBRC)); // { + P( PWR | LW, SEND(KC_LBRC)); + P( PWR | LH, SEND(KC_LSFT); SEND(KC_RBRC)); // } + P( PWR | LR, SEND(KC_RBRC)); + P( PWR | ST1, SEND(KC_LSFT); SEND(KC_BSLS)); // | + P( PWR | ST2, SEND(KC_LSFT); SEND(KC_GRV)); // ~ + P( PWR | ST3, SEND(KC_QUOT)); + P( PWR | ST4, SEND(KC_LSFT); SEND(KC_QUOT)); // " + P( PWR | RF, SEND(KC_KP_PLUS)); + P( PWR | RR, SEND(KC_LSFT); SEND(KC_7)); // & + P( PWR | RP, SEND(KC_MINS)); + P( PWR | RB, SEND(KC_EQL)); + P( PWR | RL, SEND(KC_SLSH)); + P( PWR | RG, SEND(KC_COMM)); + P( PWR | RT, SEND(KC_PAST)); + P( PWR | RS, SEND(KC_DOT)); + P( PWR | RD, SEND(KC_TAB)); + P( PWR | LA, SEND(KC_LSFT)); + P( PWR | LO, SEND(KC_SLSH)); + P( PWR | RE, SEND(KC_SCLN)); + P( PWR | RU, SEND(KC_BSLS)); + P( PWR | LNO, SEND(KC_BSLS)); + + // Letters + P( LSU | LSD, SEND(KC_A)); + P( LFT | LK, SEND(KC_S)); + P( LP | LW, SEND(KC_D)); + P( LH | LR, SEND(KC_F)); + P( ST1 | ST2, SEND(KC_G)); + P( ST3 | ST4, SEND(KC_H)); + P( RF | RR, SEND(KC_J)); + P( RT | RS, SEND(KC_SCLN)); + P( RG | RL, SEND(KC_L)); + P( RP | RB, SEND(KC_K)); + P( LSU, SEND(KC_Q)); + P( LSD, SEND(KC_Z)); + P( LFT, SEND(KC_W)); + P( LK, SEND(KC_X)); + P( LP, SEND(KC_E)); + P( LW, SEND(KC_C)); + P( LH, SEND(KC_R)); + P( LR, SEND(KC_V)); + P( ST1, SEND(KC_T)); + P( ST2, SEND(KC_B)); + P( ST3, SEND(KC_Y)); + P( ST4, SEND(KC_N)); + P( RF, SEND(KC_U)); + P( RR, SEND(KC_M)); + P( RP, SEND(KC_I)); + P( RB, SEND(KC_COMM)); + P( RL, SEND(KC_O)); + P( RG, SEND(KC_DOT)); + P( RT, SEND(KC_P)); + P( RS, SEND(KC_SLSH)); + P( RNO, SEND(KC_BSPC)); + P( LNO, SEND(KC_BSPC)); + + return 0; } -#define STENO_LAYER 0 -#define GAMING 1 -#define GAMING_2 2 - // "Layers" // Steno layer should be first in your map. -// When PWR | FN | RR | RG | RB | RS is pressed, the layer is increased to the next map. You must return to STENO_LAYER at the end. -// If you have only a single layer, you must set SINGLELAYER = yes in your rules.mk, otherwise you may experince undefined behaviour +// When PWR | FN | ST3 | ST4 is pressed, the layer is increased to the next map. You must return to STENO_LAYER at the end. +// If you need more space for chords, remove the two gaming layers. +// Note: If using NO_ACTION_TAPPING, LT will not work! const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { -// Main layer, everything goes through here -[STENO_LAYER] = LAYOUT_georgi( -STN_FN, STN_S1, STN_TL, STN_PL, STN_HL, STN_ST1, STN_ST3, STN_FR, STN_PR, STN_LR, STN_TR, STN_DR, -STN_PWR, STN_S2, STN_KL, STN_WL, STN_RL, STN_ST2, STN_ST4, STN_RR, STN_BR, STN_GR, STN_SR, STN_ZR, - STN_N1, STN_A, STN_O, STN_E, STN_U, STN_N1) -, -// Gaming layer with Numpad, Very limited -[GAMING] = LAYOUT_georgi( -KC_LSFT, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_ENT, -KC_LCTL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_DQUO, -KC_LALT, KC_SPC, LT(GAMING_2, KC_ENT), KC_DEL, KC_ASTR, TO(STENO_LAYER)), + // Main layer, everything goes through here + [STENO_LAYER] = LAYOUT_georgi( + STN_FN, STN_S1, STN_TL, STN_PL, STN_HL, STN_ST1, STN_ST3, STN_FR, STN_PR, STN_LR, STN_TR, STN_DR, + STN_PWR, STN_S2, STN_KL, STN_WL, STN_RL, STN_ST2, STN_ST4, STN_RR, STN_BR, STN_GR, STN_SR, STN_ZR, + STN_N1, STN_A, STN_O, STN_E, STN_U, STN_N7 + ), + // Gaming layer with Numpad, Very limited + [GAMING] = LAYOUT_georgi( + KC_LSFT, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_ENT, + KC_LCTL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_DQUO, + KC_LALT, KC_SPC, LT(GAMING_2, KC_ENT), KC_DEL, KC_ASTR, TO(STENO_LAYER) + ), -[GAMING_2] = LAYOUT_georgi( -KC_LSFT, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, -KC_LCTL, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_LT, KC_GT, KC_QUES, KC_RSFT, - KC_LALT, KC_SPC, KC_ENT, KC_DEL, KC_ASTR, TO(STENO_LAYER)) -}; + [GAMING_2] = LAYOUT_georgi( + KC_LSFT, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, + KC_LCTL, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_LT, KC_GT, KC_QUES, KC_RSFT, + KC_LALT, KC_SPC, KC_ENT, KC_DEL, KC_ASTR, TO(STENO_LAYER) + ) +}; -int getKeymapCount(void) { - return sizeof(keymaps)/sizeof(keymaps[0]); -} +// Don't fuck with this, thanks. +size_t keymapsCount = sizeof(keymaps)/sizeof(keymaps[0]); diff --git a/keyboards/georgi/keymaps/default/rules.mk b/keyboards/georgi/keymaps/default/rules.mk index 2973c45918d..90d8057c325 100644 --- a/keyboards/georgi/keymaps/default/rules.mk +++ b/keyboards/georgi/keymaps/default/rules.mk @@ -1,18 +1,23 @@ #---------------------------------------------------------------------------- -# make georgi:extrakey:dfu +# make georgi:default:dfu # Make sure you have dfu-programmer installed! #---------------------------------------------------------------------------- -#Debug options +NO_REPEAT = no VERBOSE = yes -CONSOLE_ENABLE = yes -DEBUG_MATRIX_SCAN_RATE = no -DEBUG_MATRIX = no KEYBOARD_SHARED_EP = yes CUSTOM_MATRIX = yes -MOUSEKEY_ENABLE = yes -SINGLE_LAYER = no +#Firmware reduction options +MOUSEKEY_ENABLE = yes # 1500 bytes +NO_TAPPING = no # 2000 bytes +NO_PRINT = yes + +#Debug options +CONSOLE_ENABLE = no +DEBUG_MATRIX_SCAN_RATE = no +DEBUG_MATRIX = no +ONLY_QWERTY = no # A bunch of stuff that you shouldn't touch unless you # know what you're doing. @@ -22,6 +27,15 @@ SRC += matrix.c i2c_master.c ifeq ($(strip $(DEBUG_MATRIX)), yes) OPT_DEFS += -DDEBUG_MATRIX endif -ifeq ($(strip $(SINGLE_LAYER)), yes) - OPT_DEFS += -DSINGLE_LAYER +ifeq ($(strip $(NO_REPEAT)), yes) + OPT_DEFS += -DNO_REPEAT +endif +ifeq ($(strip $(NO_PRINT)), yes) + OPT_DEFS += -DNO_PRINT -DNO_DEBUG +endif +ifeq ($(strip $(ONLY_QWERTY)), yes) + OPT_DEFS += -DONLYQWERTY +endif +ifeq ($(strip $(NO_TAPPING)), yes) + OPT_DEFS += -DNO_ACTION_TAPPING endif diff --git a/keyboards/georgi/keymaps/minimal/keymap.c b/keyboards/georgi/keymaps/minimal/keymap.c new file mode 100644 index 00000000000..1d9b57e9a54 --- /dev/null +++ b/keyboards/georgi/keymaps/minimal/keymap.c @@ -0,0 +1,223 @@ +/* + * Good on you for modifying your layout, this is the most nonQMK layout you will come across + * There are three modes, Steno (the default), QWERTY (Toggleable) and a Momentary symbol layer + * + * Don't modify the steno layer directly, instead add chords using the keycodes and macros + * from sten.h to the layout you want to modify. + * + * Observe the comment above processQWERTY! + * + * http://docs.gboards.ca + */ + +#include QMK_KEYBOARD_H +#include "sten.h" +#include "keymap_steno.h" +#define IGNORE_MOD_TAP_INTERRUPT + +// Proper Layers +#define FUNCT (LSD | LK | LP | LH) +#define MEDIA (LSD | LK | LW | LR) +#define MOVE (ST1 | ST2) + +// QMK Layers +#define STENO_LAYER 0 + +/* Keyboard Layout + * ,---------------------------------. ,------------------------------. + * | FN | LSU | LFT | LP | LH | ST1 | | ST3 | RF | RP | RL | RT | RD | + * |-----+-----+-----+----+----|-----| |-----|----+----+----+----+----| + * | PWR | LSD | LK | LW | LR | ST2 | | ST4 | RR | BB | RG | RS | RZ | + * `---------------------------------' `------------------------------' + * ,---------------, .---------------. + * | LNO | LA | LO | | RE | RU | RNO | + * `---------------' `---------------' + */ + +// Note: You can only use basic keycodes here! +// P() is just a wrapper to make your life easier. +// +// http://docs.gboards.ca +uint32_t processQwerty(bool lookup) { + // Specials + P( RT | RS | RD | RZ | LNO, SEND_STRING(VERSION); SEND_STRING(__DATE__)); + P( LNO | RNO | LA | LO | RE | RU, SEND(KC_MPLY)); + P( LFT | LK | LP | LW, REPEAT()); + P( ST1 | ST2 | LW | ST4, SEND(KC_BSPC)); + + // Mouse Keys + P( LO | LSD | LK, CLICK_MOUSE(KC_MS_BTN2)); + P( LO | LR | LW, CLICK_MOUSE(KC_MS_BTN1)); + + // Thumb Chords + P( LA | LO | RE | RU, SEND(KC_CAPS)); + P( LA | RU, SEND(KC_ESC)); + P( LO | RE, SEND(KC_LCTL)); + P( LNO | RNO | LA | RU, SEND(KC_LCTL); SEND(KC_LSFT)); + P( LNO | LA | RE, SEND(KC_LCTL); SEND(KC_LSFT); SEND(KC_LALT)); + + // Mods + P( RT | RD | RS | RZ, SEND(KC_LGUI)); + P( RT | RD, SEND(KC_LCTL)); + P( RS | RZ, SEND(KC_LALT)); + P( LA | LNO, SEND(KC_LCTL)); + P( LA | LO, SEND(KC_LALT)); + P( LO, SEND(KC_LSFT)); + + // Function Layer + P( FUNCT | RF | RR, SEND(KC_F5)); + P( FUNCT | RP | RB, SEND(KC_F6)); + P( FUNCT | RL | RG, SEND(KC_F7)); + P( FUNCT | RT | RS, SEND(KC_F8)); + P( FUNCT | RF, SEND(KC_F1)); + P( FUNCT | RP, SEND(KC_F2)); + P( FUNCT | RL, SEND(KC_F3)); + P( FUNCT | RT, SEND(KC_F4)); + P( FUNCT | RR, SEND(KC_F9)); + P( FUNCT | RG, SEND(KC_F10)); + P( FUNCT | RB, SEND(KC_F11)); + P( FUNCT | RS, SEND(KC_F12)); + + // Movement Layer + P( MOVE | RF, SEND(KC_LEFT)); + P( MOVE | RP, SEND(KC_DOWN)); + P( MOVE | RL, SEND(KC_UP)); + P( MOVE | RT, SEND(KC_RIGHT)); + P( MOVE | ST3, SEND(KC_PGUP)); + P( MOVE | ST4, SEND(KC_PGDN)); + + // Media Layer + P( MEDIA | RF, SEND(KC_MPRV)); + P( MEDIA | RP, SEND(KC_MPLY)); + P( MEDIA | RL, SEND(KC_MPLY)); + P( MEDIA | RT, SEND(KC_MNXT)); + P( MEDIA | RD, SEND(KC_VOLU)); + P( MEDIA | RZ, SEND(KC_VOLD)); + P( MEDIA | RS, SEND(KC_MUTE)); + + // Number Row, Left + P( LNO | LSU, SEND(KC_1)); + P( LNO | LFT, SEND(KC_2)); + P( LNO | LP, SEND(KC_3)); + P( LNO | LH, SEND(KC_4)); + P( LNO | ST1, SEND(KC_5)); + P( LNO | ST3, SEND(KC_6)); + P( LNO | RF, SEND(KC_7)); + P( LNO | RP, SEND(KC_8)); + P( LNO | RL, SEND(KC_9)); + P( LNO | RT, SEND(KC_0)); + + // Number Row, Right + P( RNO | LSU, SEND(KC_1)); + P( RNO | LFT, SEND(KC_2)); + P( RNO | LP, SEND(KC_3)); + P( RNO | LH, SEND(KC_4)); + P( RNO | ST1, SEND(KC_5)); + P( RNO | ST3, SEND(KC_6)); + P( RNO | RF, SEND(KC_7)); + P( RNO | RP, SEND(KC_8)); + P( RNO | RL, SEND(KC_9)); + P( RNO | RT, SEND(KC_0)); + P( RNO | LA, SEND(KC_5)); + + // Specials + P( RU | RNO, SEND(KC_TAB)); + P( RE | RU, SEND(KC_BSPC)); + P( RD | RZ, SEND(KC_ENT)); + P( RE, SEND(KC_ENT)); + P( RD, SEND(KC_BSPC)); + P( LNO, SEND(KC_BSPC)); + P( RNO, SEND(KC_BSPC)); + P( LA, SEND(KC_SPC)); + P( RU, SEND(KC_SPC)); + P( RZ, SEND(KC_ESC)); + + // Symbols and Numbers + P( PWR | RE | RU, SEND(KC_ENT)); + P( PWR | LA | LO, SEND(KC_SPC)); + P( PWR | LP | LW, SEND(KC_LSFT); SEND(KC_9)); // ( + P( PWR | LH | LR, SEND(KC_LSFT); SEND(KC_0)); // ) + P( PWR | ST1 | ST2, SEND(KC_GRV)); // ` + P( PWR | RD | RZ, SEND(KC_ESC)); + P( PWR | LSU | LSD, SEND(KC_LSFT); SEND(KC_3)); // # + P( PWR | LFT | LK, SEND(KC_LSFT); SEND(KC_4)); // $ + P( PWR | LSU, SEND(KC_LSFT); SEND(KC_1)); // ! + P( PWR | LSD, SEND(KC_LSFT); SEND(KC_5)); // % + P( PWR | LFT, SEND(KC_LSFT); SEND(KC_2)); // @ + P( PWR | LK, SEND(KC_LSFT); SEND(KC_6)); // ^ + P( PWR | LP, SEND(KC_LSFT); SEND(KC_LBRC)); // { + P( PWR | LW, SEND(KC_LBRC)); + P( PWR | LH, SEND(KC_LSFT); SEND(KC_RBRC)); // } + P( PWR | LR, SEND(KC_RBRC)); + P( PWR | ST1, SEND(KC_LSFT); SEND(KC_BSLS)); // | + P( PWR | ST2, SEND(KC_LSFT); SEND(KC_GRV)); // ~ + P( PWR | ST3, SEND(KC_QUOT)); + P( PWR | ST4, SEND(KC_LSFT); SEND(KC_QUOT)); // " + P( PWR | RF, SEND(KC_KP_PLUS)); + P( PWR | RR, SEND(KC_LSFT); SEND(KC_7)); // & + P( PWR | RP, SEND(KC_MINS)); + P( PWR | RB, SEND(KC_EQL)); + P( PWR | RL, SEND(KC_SLSH)); + P( PWR | RG, SEND(KC_COMM)); + P( PWR | RT, SEND(KC_PAST)); + P( PWR | RS, SEND(KC_DOT)); + P( PWR | RD, SEND(KC_TAB)); + P( PWR | LA, SEND(KC_LSFT)); + P( PWR | LO, SEND(KC_SLSH)); + P( PWR | RE, SEND(KC_SCLN)); + P( PWR | RU, SEND(KC_BSLS)); + P( PWR | LNO, SEND(KC_BSLS)); + + // Letters + P( LSU | LSD, SEND(KC_A)); + P( LFT | LK, SEND(KC_S)); + P( LP | LW, SEND(KC_D)); + P( LH | LR, SEND(KC_F)); + P( ST1 | ST2, SEND(KC_G)); + P( ST3 | ST4, SEND(KC_H)); + P( RF | RR, SEND(KC_J)); + P( RT | RS, SEND(KC_SCLN)); + P( RG | RL, SEND(KC_L)); + P( RP | RB, SEND(KC_K)); + P( LSU, SEND(KC_Q)); + P( LSD, SEND(KC_Z)); + P( LFT, SEND(KC_W)); + P( LK, SEND(KC_X)); + P( LP, SEND(KC_E)); + P( LW, SEND(KC_C)); + P( LH, SEND(KC_R)); + P( LR, SEND(KC_V)); + P( ST1, SEND(KC_T)); + P( ST2, SEND(KC_B)); + P( ST3, SEND(KC_Y)); + P( ST4, SEND(KC_N)); + P( RF, SEND(KC_U)); + P( RR, SEND(KC_M)); + P( RP, SEND(KC_I)); + P( RB, SEND(KC_COMM)); + P( RL, SEND(KC_O)); + P( RG, SEND(KC_DOT)); + P( RT, SEND(KC_P)); + P( RS, SEND(KC_SLSH)); + P( RNO, SEND(KC_BSPC)); + P( LNO, SEND(KC_BSPC)); + + return 0; +} + +// "Layers" +// Steno layer should be first in your map. +// When PWR | FN | ST3 | ST4 is pressed, the layer is increased to the next map. You must return to STENO_LAYER at the end. +// If you need more space for chords, remove the two gaming layers. +// Note: If using NO_ACTION_TAPPING, LT will not work! + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + // Main layer, everything goes through here + [STENO_LAYER] = LAYOUT_georgi( + STN_FN, STN_S1, STN_TL, STN_PL, STN_HL, STN_ST1, STN_ST3, STN_FR, STN_PR, STN_LR, STN_TR, STN_DR, + STN_PWR, STN_S2, STN_KL, STN_WL, STN_RL, STN_ST2, STN_ST4, STN_RR, STN_BR, STN_GR, STN_SR, STN_ZR, + STN_N1, STN_A, STN_O, STN_E, STN_U, STN_N7 + ) +}; +// Don't fuck with this, thanks. +size_t keymapsCount = sizeof(keymaps)/sizeof(keymaps[0]); diff --git a/keyboards/georgi/keymaps/minimal/readme.md b/keyboards/georgi/keymaps/minimal/readme.md new file mode 100644 index 00000000000..f9da34b0245 --- /dev/null +++ b/keyboards/georgi/keymaps/minimal/readme.md @@ -0,0 +1,11 @@ +# Georgi QWERTY/Steno firmware + +This is the default keymap for Georgi, it's based heavily off of the naps62 ErgoDox and the Gergo layout. +It is both a ergonomic and programmer friendly keymap. + +Ideally you should copy this directory and make your changes there. If you come up with a good layout submit a PR! + +## Space issues +If you find yourself running out of space for dictionary entries, disabling mousekeys in rules.mk will save +you about 4k for entries! +Get a free 1k by deleting the Gaming layers from the keymap! diff --git a/keyboards/georgi/keymaps/minimal/rules.mk b/keyboards/georgi/keymaps/minimal/rules.mk new file mode 100644 index 00000000000..cdbbbc280ec --- /dev/null +++ b/keyboards/georgi/keymaps/minimal/rules.mk @@ -0,0 +1,41 @@ +#---------------------------------------------------------------------------- +# make georgi:default:dfu +# Make sure you have dfu-programmer installed! +#---------------------------------------------------------------------------- + +NO_REPEAT = no +VERBOSE = yes +KEYBOARD_SHARED_EP = yes +CUSTOM_MATRIX = yes + +#Firmware reduction options +MOUSEKEY_ENABLE = no # 1500 bytes +NO_TAPPING = yes # 2000 bytes +NO_PRINT = yes + +#Debug options +CONSOLE_ENABLE = no +DEBUG_MATRIX_SCAN_RATE = no +DEBUG_MATRIX = no +ONLY_QWERTY = no + +# A bunch of stuff that you shouldn't touch unless you +# know what you're doing. +# +# No touchy, capiche? +SRC += matrix.c i2c_master.c +ifeq ($(strip $(DEBUG_MATRIX)), yes) + OPT_DEFS += -DDEBUG_MATRIX +endif +ifeq ($(strip $(NO_REPEAT)), yes) + OPT_DEFS += -DNO_REPEAT +endif +ifeq ($(strip $(NO_PRINT)), yes) + OPT_DEFS += -DNO_PRINT -DNO_DEBUG +endif +ifeq ($(strip $(ONLY_QWERTY)), yes) + OPT_DEFS += -DONLYQWERTY +endif +ifeq ($(strip $(NO_TAPPING)), yes) + OPT_DEFS += -DNO_ACTION_TAPPING +endif diff --git a/keyboards/georgi/keymaps/norman/keymap.c b/keyboards/georgi/keymaps/norman/keymap.c new file mode 100644 index 00000000000..58c42c85295 --- /dev/null +++ b/keyboards/georgi/keymaps/norman/keymap.c @@ -0,0 +1,267 @@ +/* + * Good on you for modifying your layout, this is the most nonQMK layout you will come across + * There are three modes, Steno (the default), QWERTY (Toggleable) and a Momentary symbol layer + * + * Don't modify the steno layer directly, instead add chords using the keycodes and macros + * from sten.h to the layout you want to modify. + * + * Observe the comment above processQWERTY! + * + * http://docs.gboards.ca + */ + +#include QMK_KEYBOARD_H +#include "sten.h" +#include "keymap_steno.h" +#define IGNORE_MOD_TAP_INTERRUPT + +// Proper Layers +#define FUNCT (LSD | LK | LP | LH) +#define MEDIA (LSD | LK | LW | LR) +#define MOVE (LH | ST2) + +/* Keyboard Layout + * ,---------------------------------. ,------------------------------. + * | FN | LSU | LFT | LP | LH | ST1 | | ST3 | RF | RP | RL | RT | RD | + * |-----+-----+-----+----+----|-----| |-----|----+----+----+----+----| + * | PWR | LSD | LK | LW | LR | ST2 | | ST4 | RR | RB | RG | RS | RZ | + * `---------------------------------' `------------------------------' + * ,---------------, .---------------. + * | LNO | LA | LO | | RE | RU | RNO | + * `---------------' `---------------' + */ + +// YOU MUST ORDER THIS! +// Order your chords from longest to shortest! +// You can only use basic keycodes here! +// +// P() is just a wrapper to make your life easier. +// +// http://docs.gboards.ca +uint32_t processQwerty(bool lookup) { + // Specials + P( RT | RS | RD | RZ | LNO, SEND_STRING(VERSION); SEND_STRING(__DATE__)); + P( LNO | LA | LO | RE | RU, SEND(KC_MPLY)); + P( ST1 | ST2 | ST3 | ST4, SEND(KC_BSPC)); + + // Thumb Chords + P( LA | LO | RE | RU, SEND(KC_CAPS)); + P( LA | RU, SEND(KC_ESC)); + P( LO | RE, SEND(KC_LCTL)); + P( LNO | LA | RU, SEND(KC_LCTL); SEND(KC_LSFT)); + P( LNO | LA | RE, SEND(KC_LCTL); SEND(KC_LSFT); SEND(KC_LALT)); + + // Mods + P( RT | RD | RS | RZ, SEND(KC_LGUI)); + P( RT | RD, SEND(KC_LCTL)); + P( RS | RZ, SEND(KC_LALT)); + P( LA | LNO, SEND(KC_LCTL)); + P( LA | LO, SEND(KC_LALT)); + P( LO, SEND(KC_LSFT)); + + // Function Layer + P( FUNCT | RF | RR, SEND(KC_F6)); + P( FUNCT | RP | RB, SEND(KC_F7)); + P( FUNCT | RL | RG, SEND(KC_F8)); + P( FUNCT | ST3 | ST4, SEND(KC_F5)); + P( FUNCT| ST3, SEND(KC_F1)); + P( FUNCT| ST4, SEND(KC_F9)); + P( FUNCT | RF, SEND(KC_F2)); + P( FUNCT | RP, SEND(KC_F3)); + P( FUNCT | RL, SEND(KC_F4)); + P( FUNCT | RR, SEND(KC_F10)); + P( FUNCT | RG, SEND(KC_F12)); + P( FUNCT | RB, SEND(KC_F11)); + P( FUNCT | RD, SEND(KC_RALT); SEND(KC_T); SEND(KC_H); SEND(KC_U); SEND(KC_P)); + P( FUNCT | RZ, SEND(KC_RALT); SEND(KC_T); SEND(KC_H); SEND(KC_D); SEND(KC_N)); + P( FUNCT | RT, SEND(KC_RALT); SEND(KC_S); SEND(KC_F)); + P( FUNCT | RS, SEND(KC_LALT); SEND(KC_SPC)); + P( FUNCT | RE, SEND(KC_LCTL); SEND(KC_LSFT); SEND(KC_ESC)); + P( FUNCT | RU, SEND(KC_LCTL); SEND(KC_LSFT); SEND(KC_0)); + + // Movement Layer + P( MOVE | RF, SEND(KC_LGUI); SEND(KC_LSFT); SEND(KC_LEFT)); + P( MOVE | RP, SEND(KC_UP)); + P( MOVE | RL, SEND(KC_LGUI); SEND(KC_LSFT); SEND(KC_RGHT)); + P( MOVE | RT, SEND(KC_LALT); SEND(KC_LCTL); SEND(KC_LGUI); SEND(KC_C)); + P( MOVE | ST3, SEND(KC_PGUP)); + P( MOVE | ST4, SEND(KC_PGDN)); + P( MOVE | RD, SEND(KC_HOME)); + P( MOVE | RZ, SEND(KC_END)); + P( MOVE | RG, SEND(KC_RIGHT)); + P( MOVE | RB, SEND(KC_DOWN)); + P( MOVE | RR, SEND(KC_LEFT)); + P( MOVE | RS, SEND(KC_LSFT); SEND(KC_LCTL); SEND(KC_LGUI); SEND(KC_T)); + P( MOVE | RE, SEND(KC_LSFT); SEND(KC_LALT); SEND(KC_LGUI); SEND(KC_S)); + P( MOVE | RU, SEND(KC_LSFT); SEND(KC_LCTL); SEND(KC_1)); + + + // Media Layer + P( MEDIA | RF, SEND(KC_MEDIA_PREV_TRACK)); + P( MEDIA | RP, SEND(KC_MPLY)); + P( MEDIA | RL, SEND(KC_MPLY)); + P( MEDIA | RT, SEND(KC_MEDIA_NEXT_TRACK)); + P( MEDIA | RD, SEND(KC_VOLU)); + P( MEDIA | RZ, SEND(KC_VOLD)); + P( MEDIA | RS, SEND(KC_MUTE)); + P( MEDIA | ST3, SEND(KC_LALT); SEND(KC_LCTL); SEND(KC_LGUI); SEND(KC_4)); + P( MEDIA | ST4, SEND(KC_LALT); SEND(KC_LCTL); SEND(KC_LGUI); SEND(KC_2)); + P( MEDIA | RR, SEND(KC_LALT); SEND(KC_LCTL); SEND(KC_LGUI); SEND(KC_3)); + P( MEDIA | RB, SEND(KC_LCTL); SEND(KC_LSFT); SEND(KC_GRV)); + P( MEDIA | RG, SEND(KC_LCTL); SEND(KC_LSFT); SEND(KC_8)); + P( MEDIA | RE, SEND(KC_RALT); SEND(KC_F); SEND(KC_I); SEND(KC_R); SEND(KC_E)); + P( MEDIA | RU, SEND(KC_RALT); SEND(KC_T); SEND(KC_A); SEND(KC_D)); + + // Mouse Keys and Printscreen + P( LFT | LH, CLICK_MOUSE(KC_MS_BTN1)); + P( LK | LR, CLICK_MOUSE(KC_MS_BTN2)); + P( RF | RT, SEND(KC_PSCR);); + + // Number Row Left + P( LNO | LSU, SEND(KC_1)); + P( LNO | LFT, SEND(KC_2)); + P( LNO | LP, SEND(KC_3)); + P( LNO | LH, SEND(KC_4)); + P( LNO | ST1, SEND(KC_5)); + P( LNO | ST3, SEND(KC_6)); + P( LNO | RF, SEND(KC_7)); + P( LNO | RP, SEND(KC_8)); + P( LNO | RL, SEND(KC_9)); + P( LNO | RT, SEND(KC_0)); + P( LNO | LA, SEND(KC_5)); + P( LNO | RT, SEND(KC_0)); + + // Number Row Right + P( RNO | LSU, SEND(KC_1)); + P( RNO | LFT, SEND(KC_2)); + P( RNO | LP, SEND(KC_3)); + P( RNO | LH, SEND(KC_4)); + P( RNO | ST1, SEND(KC_5)); + P( RNO | ST3, SEND(KC_6)); + P( RNO | RF, SEND(KC_7)); + P( RNO | RP, SEND(KC_8)); + P( RNO | RL, SEND(KC_9)); + P( RNO | RT, SEND(KC_0)); + P( RNO | LA, SEND(KC_5)); + P( RNO | RT, SEND(KC_0)); + + // Specials + P( LA | LNO, SEND(KC_ESC)); + P( RU | RNO, SEND(KC_TAB)); + P( RE | RU, SEND(KC_LSFT); SEND(KC_SLSH)); + P( RD | RZ, SEND(KC_ENT)); + P( RE, SEND(KC_ENT)); + //P( RD, SEND(KC_BSPC)); + P( LNO, SEND(KC_BSPC)); + P( RD, SEND(KC_DEL)); + P( LA, SEND(KC_SPC)); + P( RU, SEND(KC_SPC)); + P( RZ, SEND(KC_ESC)); + //P( RNO, REPEAT()); + + // Letters + P( LSU | LSD, SEND(KC_A)); + P( LFT | LK, SEND(KC_S)); + P( LP | LW, SEND(KC_E)); + P( LH | LR, SEND(KC_T)); + P( ST1 | ST2, SEND(KC_G)); + P( ST3 | ST4, SEND(KC_Y)); + P( RF | RR, SEND(KC_N)); + P( RT | RS, SEND(KC_H)) + P( RG | RL, SEND(KC_O)); + P( RP | RB, SEND(KC_I)); + P( LSU, SEND(KC_Q)); + P( LSD, SEND(KC_Z)); + P( LFT, SEND(KC_W)); + P( LK, SEND(KC_X)); + P( LP, SEND(KC_D)); + P( LW, SEND(KC_C)); + P( LH, SEND(KC_F)); + P( LR, SEND(KC_V)); + P( ST1, SEND(KC_K)); + P( ST2, SEND(KC_B)); + P( ST3, SEND(KC_J)); + P( ST4, SEND(KC_P)); + P( RF, SEND(KC_U)); + P( RR, SEND(KC_M)); + P( RP, SEND(KC_R)); + P( RB, SEND(KC_COMM)); + P( RL, SEND(KC_L)); + P( RG, SEND(KC_DOT)); + P( RT, SEND(KC_SCLN)); + P( RS, SEND(KC_SLSH)); + + // Symbols and Numbers + P( PWR | RE | RU, SEND(KC_ENT)); + P( PWR | LA | LO, SEND(KC_SPC)); + P( PWR | LP | LW, SEND(KC_LSFT); SEND(KC_9)); // ( + P( PWR | LH | LR, SEND(KC_LSFT); SEND(KC_0)); // ) + P( PWR | ST1 | ST2, SEND(KC_GRV)); // ` + P( PWR | RD | RZ, SEND(KC_ESC)); + P( PWR | LSU | LSD, SEND(KC_LSFT); SEND(KC_3)); // # + P( PWR | LFT | LK, SEND(KC_LSFT); SEND(KC_4)); // $ + P( PWR | LSU, SEND(KC_LSFT); SEND(KC_1)); // ! + P( PWR | LSD, SEND(KC_LSFT); SEND(KC_5)); // % + P( PWR | LFT, SEND(KC_LSFT); SEND(KC_2)); // @ + P( PWR | LK, SEND(KC_LSFT); SEND(KC_6)); // ^ + P( PWR | LP, SEND(KC_LSFT); SEND(KC_LBRC)); // { + P( PWR | LW, SEND(KC_LBRC)); + P( PWR | LH, SEND(KC_LSFT); SEND(KC_RBRC)); // } + P( PWR | LR, SEND(KC_RBRC)); + P( PWR | ST1, SEND(KC_LSFT); SEND(KC_BSLS)); // | + P( PWR | ST2, SEND(KC_LSFT); SEND(KC_GRV)); // ~ + P( PWR | ST3, SEND(KC_QUOT)); + P( PWR | ST4, SEND(KC_LSFT); SEND(KC_QUOT)); // " + P( PWR | RF, SEND(KC_KP_PLUS)); + P( PWR | RR, SEND(KC_LSFT); SEND(KC_7)); // & + P( PWR | RP, SEND(KC_MINS)); + P( PWR | RB, SEND(KC_EQL)); + P( PWR | RL, SEND(KC_SLSH)); + P( PWR | RG, SEND(KC_LSFT); SEND(KC_MINS)); + P( PWR | RT, SEND(KC_PAST)); + P( PWR | RS, SEND(KC_DOT)); + P( PWR | RD, SEND(KC_TAB)); + P( PWR | LA, SEND(KC_LSFT); SEND(KC_SCLN)); + P( PWR | LO, SEND(KC_BSLS)); + P( PWR | RE, SEND(KC_SCLN)); + P( PWR | RU, SEND(KC_BSLS)); + P( PWR | RZ, SEND(KC_LSFT)); + + return 0; +} + +#define STENO_LAYER 0 +#define GAMING 1 +#define GAMING_2 2 +#define MOVEMENT 3 + +// "Layers" +// Steno layer should be first in your map. +// When PWR | FN | ST3 | ST4 is pressed, the layer is increased to the next map. You must return to STENO_LAYER at the end. +// If you need more space for chords, remove the two gaming layers. + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { +// Main layer, everything goes through here +[STENO_LAYER] = LAYOUT_georgi( +STN_FN, STN_S1, STN_TL, STN_PL, STN_HL, STN_ST1, STN_ST3, STN_FR, STN_PR, STN_LR, STN_TR, STN_DR, +STN_PWR, STN_S2, STN_KL, STN_WL, STN_RL, STN_ST2, STN_ST4, STN_RR, STN_BR, STN_GR, STN_SR, STN_ZR, + STN_N1, STN_A, STN_O, STN_E, STN_U, STN_N7) +, +// Gaming layer with Numpad, Very limited +[GAMING] = LAYOUT_georgi( +KC_LSFT, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_ENT, +KC_LCTL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_DQUO, +KC_LALT, KC_SPC, LT(GAMING_2, KC_ENT), KC_DEL, KC_ASTR, TO(STENO_LAYER)), + +[GAMING_2] = LAYOUT_georgi( +KC_LSFT, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, +KC_LCTL, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_LT, KC_GT, KC_QUES, KC_RSFT, + KC_LALT, KC_SPC, KC_NO, KC_DEL, KC_ASTR, TO(STENO_LAYER)), + +[MOVEMENT] = LAYOUT_georgi( +KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS, KC_PGUP, KC_TRNS, KC_UP, KC_TRNS, KC_TRNS, KC_HOME, +KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PGDN, KC_LEFT, KC_DOWN, KC_RIGHT, KC_TRNS, KC_END, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS) +}; +// Don't fuck with this, thanks. +size_t keymapsCount = sizeof(keymaps)/sizeof(keymaps[0]); diff --git a/keyboards/georgi/keymaps/norman/readme.md b/keyboards/georgi/keymaps/norman/readme.md new file mode 100644 index 00000000000..f9da34b0245 --- /dev/null +++ b/keyboards/georgi/keymaps/norman/readme.md @@ -0,0 +1,11 @@ +# Georgi QWERTY/Steno firmware + +This is the default keymap for Georgi, it's based heavily off of the naps62 ErgoDox and the Gergo layout. +It is both a ergonomic and programmer friendly keymap. + +Ideally you should copy this directory and make your changes there. If you come up with a good layout submit a PR! + +## Space issues +If you find yourself running out of space for dictionary entries, disabling mousekeys in rules.mk will save +you about 4k for entries! +Get a free 1k by deleting the Gaming layers from the keymap! diff --git a/keyboards/georgi/keymaps/template/rules.mk b/keyboards/georgi/keymaps/norman/rules.mk similarity index 61% rename from keyboards/georgi/keymaps/template/rules.mk rename to keyboards/georgi/keymaps/norman/rules.mk index 1178fd80db1..bb97bef2815 100644 --- a/keyboards/georgi/keymaps/template/rules.mk +++ b/keyboards/georgi/keymaps/norman/rules.mk @@ -1,18 +1,20 @@ #---------------------------------------------------------------------------- -# make georgi:extrakey:dfu +# make georgi:default:dfu # Make sure you have dfu-programmer installed! #---------------------------------------------------------------------------- -#Debug options +NO_REPEAT = yes VERBOSE = yes -CONSOLE_ENABLE = yes -DEBUG_MATRIX_SCAN_RATE = no -DEBUG_MATRIX = no KEYBOARD_SHARED_EP = yes CUSTOM_MATRIX = yes -MOUSEKEY_ENABLE = no -SINGLE_LAYER = no +MOUSEKEY_ENABLE = yes +#Debug options +CONSOLE_ENABLE = no +DEBUG_MATRIX_SCAN_RATE = no +DEBUG_MATRIX = no +NO_PRINT = yes +ONLY_QWERTY = no # A bunch of stuff that you shouldn't touch unless you # know what you're doing. @@ -22,6 +24,12 @@ SRC += matrix.c i2c_master.c ifeq ($(strip $(DEBUG_MATRIX)), yes) OPT_DEFS += -DDEBUG_MATRIX endif -ifeq ($(strip $(SINGLE_LAYER)), yes) - OPT_DEFS += -DSINGLE_LAYER +ifeq ($(strip $(NO_REPEAT)), yes) + OPT_DEFS += -DNO_REPEAT +endif +ifeq ($(strip $(NO_PRINT)), yes) + OPT_DEFS += -DNO_PRINT -DNO_DEBUG +endif +ifeq ($(strip $(ONLY_QWERTY)), yes) + OPT_DEFS += -DONLYQWERTY endif diff --git a/keyboards/georgi/keymaps/template/keymap.c b/keyboards/georgi/keymaps/template/keymap.c deleted file mode 100644 index b17d7ed9f7e..00000000000 --- a/keyboards/georgi/keymaps/template/keymap.c +++ /dev/null @@ -1,216 +0,0 @@ -/* - * Good on you for modifying your layout, this is the most nonQMK layout you will come across - * There are three modes, Steno (the default), QWERTY (Toggleable) and a Momentary symbol layer - * - * Don't modify the steno layer directly, instead add chords using the keycodes and macros - * from sten.h to the layout you want to modify. - * - * Observe the comment above processQWERTY! - * - * http://docs.gboards.ca - */ - -#include QMK_KEYBOARD_H -#include "sten.h" -#include "keymap_steno.h" -#define IGNORE_MOD_TAP_INTERRUPT - -int getKeymapCount(void); - -// Proper Layers -#define FUNCT (LSD | LK | LP | LH) -#define MEDIA (LSD | LK | LW | LR) -#define MOVE (ST1 | ST2) - -/* Keyboard Layout - * ,---------------------------------. ,------------------------------. - * | FN | LSU | LFT | LP | LH | ST1 | | ST3 | RF | RP | RL | RT | RD | - * |-----+-----+-----+----+----|-----| |-----|----+----+----+----+----| - * | PWR | LSD | LK | LW | LR | ST2 | | ST4 | RR | RG | RB | RS | RZ | - * `---------------------------------' `------------------------------' - * ,---------------, .---------------. - * | NUM | LA | LO | | RE | RU | NUM | - * `---------------' `---------------' - */ - -// YOU MUST ORDER THIS! -// P Will return from processing on the first match it finds. Therefore -// PJ Will run the requested action, remove the matched chord and continue -// -// First any chords that would conflict with PJs need to be checked, then PJs, lastly Ps. -// For all chords should be ordered by length in their section! -// -// http://docs.gboards.ca -bool processQwerty(void) { - // Place P's that would be trashed by PJ's here - P( RT | RS | RD | RZ | NUM, SEND_STRING(VERSION); SEND_STRING(__DATE__)); - P( NUM | LA | LO | RE | RU, SEND(KC_MPLY)); - P( ST1 | ST2 | ST3 | ST4, SEND(KC_BSPC)); - - // Thumb Chords - P( LA | LO | RE | RU, SEND(KC_CAPS)); - P( LA | RU, SEND(KC_ESC)); - PJ( LO | RE, SEND(KC_LCTL)); - PJ( NUM | LA | RU, SEND(KC_LCTL); SEND(KC_LSFT)); - PJ( NUM | LA | RE, SEND(KC_LCTL); SEND(KC_LSFT); SEND(KC_LALT)); - - // Mods - PJ( RT | RD | RS | RZ, SEND(KC_LGUI)); - PJ( RT | RD, SEND(KC_LCTL)); - PJ( RS | RZ, SEND(KC_LALT)); - PJ( LA | NUM, SEND(KC_LCTL)); - PJ( LA | LO, SEND(KC_LALT)); - PJ( LO, SEND(KC_LSFT)); - - // Function Layer - P( FUNCT | RF | RR, SEND(KC_F5)); - P( FUNCT | RP | RB, SEND(KC_F6)); - P( FUNCT | RL | RG, SEND(KC_F7)); - P( FUNCT | RT | RS, SEND(KC_F8)); - P( FUNCT | RF, SEND(KC_F1)); - P( FUNCT | RP, SEND(KC_F2)); - P( FUNCT | RL, SEND(KC_F3)); - P( FUNCT | RT, SEND(KC_F4)); - P( FUNCT | RR, SEND(KC_F9)); - P( FUNCT | RG, SEND(KC_F10)); - P( FUNCT | RB, SEND(KC_F11)); - P( FUNCT | RS, SEND(KC_F12)); - - // Movement Layer - P( MOVE | RF, SEND(KC_LEFT)); - P( MOVE | RP, SEND(KC_DOWN)); - P( MOVE | RL, SEND(KC_UP)); - P( MOVE | RT, SEND(KC_RIGHT)); - P( MOVE | ST3, SEND(KC_PGUP)); - P( MOVE | ST4, SEND(KC_PGDN)); - - // Media Layer - P( MEDIA | RF, SEND(KC_MPRV)); - P( MEDIA | RP, SEND(KC_MPLY)); - P( MEDIA | RL, SEND(KC_MPLY)); - P( MEDIA | RT, SEND(KC_MNXT)); - P( MEDIA | RD, SEND(KC_VOLU)); - P( MEDIA | RZ, SEND(KC_VOLD)); - P( MEDIA | RS, SEND(KC_MUTE)); - - // Mouse Keys - P( LP | LH, clickMouse(KC_MS_BTN1)); - P( LW | LR, clickMouse(KC_MS_BTN2)); - - // Number Row - P( NUM | LSU, SEND(KC_1)); - P( NUM | LFT, SEND(KC_2)); - P( NUM | LP, SEND(KC_3)); - P( NUM | LH, SEND(KC_4)); - P( NUM | ST1, SEND(KC_5)); - P( NUM | ST3, SEND(KC_6)); - P( NUM | RF, SEND(KC_7)); - P( NUM | RP, SEND(KC_8)); - P( NUM | RL, SEND(KC_9)); - P( NUM | RT, SEND(KC_0)); - P( NUM | LA, SEND(KC_5)); - P( NUM | RT, SEND(KC_0)); - - // Specials - P( LA | NUM, SEND(KC_ESC)); - P( RU | NUM, SEND(KC_TAB)); - P( RE | RU, SEND(KC_BSPC)); - P( RD | RZ, SEND(KC_ENT)); - P( RE, SEND(KC_ENT)); - P( RD, SEND(KC_BSPC)); - P( NUM, SEND(KC_BSPC)); - P( LA, SEND(KC_SPC)); - P( RU, SEND(KC_SPC)); - P( RZ, SEND(KC_ESC)); - - // Letters - P( LSU | LSD, SEND(KC_A)); - P( LFT | LK, SEND(KC_S)); - P( LP | LW, SEND(KC_D)); - P( LH | LR, SEND(KC_F)); - P( ST1 | ST2, SEND(KC_G)); - P( ST3 | ST4, SEND(KC_H)); - P( RF | RR, SEND(KC_J)); - P( RT | RS, SEND(KC_SCLN)) - P( RG | RL, SEND(KC_L)); - P( RP | RB, SEND(KC_K)); - P( LSU, SEND(KC_Q)); - P( LSD, SEND(KC_Z)); - P( LFT, SEND(KC_W)); - P( LK, SEND(KC_X)); - P( LP, SEND(KC_E)); - P( LW, SEND(KC_C)); - P( LH, SEND(KC_R)); - P( LR, SEND(KC_V)); - P( ST1, SEND(KC_T)); - P( ST2, SEND(KC_B)); - P( ST3, SEND(KC_Y)); - P( ST4, SEND(KC_N)); - P( RF, SEND(KC_U)); - P( RR, SEND(KC_M)); - P( RP, SEND(KC_I)); - P( RB, SEND(KC_COMM)); - P( RL, SEND(KC_O)); - P( RG, SEND(KC_DOT)); - P( RT, SEND(KC_P)); - P( RS, SEND(KC_SLSH)); - - // Symbols and Numbers - P( PWR | RE | RU, SEND(KC_ENT)); - P( PWR | LA | LO, SEND(KC_SPC)); - P( PWR | LP | LW, SEND(KC_LSFT); SEND(KC_9)); // ( - P( PWR | LH | LR, SEND(KC_LSFT); SEND(KC_0)); // ) - P( PWR | ST1 | ST2, SEND(KC_GRV)); // ` - P( PWR | RD | RZ, SEND(KC_ESC)); - P( PWR | LSU | LSD, SEND(KC_LSFT); SEND(KC_3)); // # - P( PWR | LFT | LK, SEND(KC_LSFT); SEND(KC_4)); // $ - P( PWR | LSU, SEND(KC_LSFT); SEND(KC_1)); // ! - P( PWR | LSD, SEND(KC_LSFT); SEND(KC_5)); // % - P( PWR | LFT, SEND(KC_LSFT); SEND(KC_2)); // @ - P( PWR | LK, SEND(KC_LSFT); SEND(KC_6)); // ^ - P( PWR | LP, SEND(KC_LSFT); SEND(KC_LBRC)); // { - P( PWR | LW, SEND(KC_LBRC)); - P( PWR | LH, SEND(KC_LSFT); SEND(KC_RBRC)); // } - P( PWR | LR, SEND(KC_RBRC)); - P( PWR | ST1, SEND(KC_LSFT); SEND(KC_BSLS)); // | - P( PWR | ST2, SEND(KC_LSFT); SEND(KC_GRV)); // ~ - P( PWR | ST3, SEND(KC_QUOT)); - P( PWR | ST4, SEND(KC_LSFT); SEND(KC_QUOT)); // " - P( PWR | RF, SEND(KC_KP_PLUS)); - P( PWR | RR, SEND(KC_LSFT); SEND(KC_7)); // & - P( PWR | RP, SEND(KC_MINS)); - P( PWR | RB, SEND(KC_EQL)); - P( PWR | RL, SEND(KC_SLSH)); - P( PWR | RG, SEND(KC_COMM)); - P( PWR | RT, SEND(KC_PAST)); - P( PWR | RS, SEND(KC_DOT)); - P( PWR | RD, SEND(KC_TAB)); - P( PWR | LA, SEND(KC_SCLN)); - P( PWR | LO, SEND(KC_SLSH)); - P( PWR | RE, SEND(KC_SCLN)); - P( PWR | RU, SEND(KC_SLSH)); - - - // If we make here, send as a steno chord - // If plover is running we can hook that host side - return false; -} - -#define STENO_LAYER 0 - -// "Layers" -// Steno layer should be first in your map. -// When PWR | FN | RR | RG | RB | RS is pressed, the layer is increased to the next map. You must return to STENO_LAYER at the end. -// If you have only a single layer, you must set SINGLELAYER = yes in your rules.mk, otherwise you may experince undefined behaviour - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { -// Main layer, everything goes through here -[STENO_LAYER] = LAYOUT_georgi( -STN_FN, STN_S1, STN_TL, STN_PL, STN_HL, STN_ST1, STN_ST3, STN_FR, STN_PR, STN_LR, STN_TR, STN_DR, -STN_PWR, STN_S2, STN_KL, STN_WL, STN_RL, STN_ST2, STN_ST4, STN_RR, STN_BR, STN_GR, STN_SR, STN_ZR, - STN_N1, STN_A, STN_O, STN_E, STN_U, STN_N1) -}; - -int getKeymapCount(void) { - return sizeof(keymaps)/sizeof(keymaps[0]); -} diff --git a/keyboards/georgi/keymaps/template/readme.md b/keyboards/georgi/keymaps/template/readme.md deleted file mode 100644 index 7c6fc351232..00000000000 --- a/keyboards/georgi/keymaps/template/readme.md +++ /dev/null @@ -1,6 +0,0 @@ -# Georgi QWERTY/Steno firmware - -This is a blank template configured with 5K of free space for your onboard dictionary! -Read the docs over at [gBoards](http://docs.gboards.ca) - -Ideally you should copy this directory and make your changes there. If you come up with a good layout submit a PR! diff --git a/keyboards/georgi/readme.md b/keyboards/georgi/readme.md index 03e2e3d83d5..d8699488364 100644 --- a/keyboards/georgi/readme.md +++ b/keyboards/georgi/readme.md @@ -21,8 +21,11 @@ To just test your build with the default keymap Build options can be enabled/disabled in keyboards/georgi/keymaps/default/rules.mk . Copy the default directory and make any changes to your layout, if you think they're worth sharing submit a PR! +## Documentation +Is hosted over on [docs.gboards.ca](http://docs.gboards.ca/). Please take a look at the docs for customizing your firmware! + # Space -The stock firmware uses nearly all of the flash avalible. For custom dictionary modifications, disable mousekeys in your keymaps rules.mk (4K of space) and remove the Gaming layers. I've done this already in the provided keymap 'template'. +The stock firmware leaves 7K free for custom entries. For extra space disable mousekeys in your keymaps rules.mk (3K of space) and remove the Gaming layers (1k). See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/georgi/rules.mk b/keyboards/georgi/rules.mk index 0f730f3b736..a87b448e349 100644 --- a/keyboards/georgi/rules.mk +++ b/keyboards/georgi/rules.mk @@ -4,7 +4,7 @@ # Do not edit this file! Make a copy of keymaps/default and modify that! #---------------------------------------------------------------------------- # Source includes -SRC += matrix.c i2c_master.c +SRC += matrix.c i2c_master.c sten.c # Hardware info MCU = atmega32u4 @@ -15,8 +15,9 @@ F_USB = $(F_CPU) EXTRAFLAGS += -flto CUSTOM_MATRIX = yes +MOUSEKEY_ENABLE = no STENO_ENABLE = yes EXTRAKEY_ENABLE = yes -CONSOLE_ENABLE = no +CONSOLE_ENABLE = yes COMMAND_ENABLE = no NKRO_ENABLE = yes diff --git a/keyboards/georgi/sten.c b/keyboards/georgi/sten.c index 3b33b11d6ec..1a84c7893f1 100644 --- a/keyboards/georgi/sten.c +++ b/keyboards/georgi/sten.c @@ -1,2 +1,406 @@ -#include "sten.h" +#include "sten.h" +// Chord state +uint32_t cChord = 0; // Current Chord +int chordIndex = 0; // Keys in previousachord +int32_t chordState[32]; // Full Chord history +#define QWERBUF 24 // Size of chords to buffer for output + +bool repeatFlag = false; // Should we repeat? +uint32_t pChord = 0; // Previous Chord +int pChordIndex = 0; // Keys in previousachord +uint32_t pChordState[32]; // Previous chord sate +uint32_t stickyBits = 0; // Or'd with every incoming press + +// Mode state +enum MODE { STENO = 0, QWERTY, COMMAND }; +enum MODE pMode; +bool QWERSTENO = false; +#ifdef ONLYQWERTY +enum MODE cMode = QWERTY; +#else +enum MODE cMode = STENO; +#endif + +// Command State +#define MAX_CMD_BUF 20 +uint8_t CMDLEN = 0; +uint8_t CMDBUF[MAX_CMD_BUF]; + +// Key Repeat state +bool inChord = false; +bool repEngaged = false; +uint16_t repTimer = 0; +#define REP_INIT_DELAY 750 +#define REP_DELAY 25 + +// Mousekeys state +bool inMouse = false; +int8_t mousePress; + +// All processing done at chordUp goes through here +bool send_steno_chord_user(steno_mode_t mode, uint8_t chord[6]) { + // Check for mousekeys, this is release +#ifdef MOUSEKEY_ENABLE + if (inMouse) { + inMouse = false; + mousekey_off(mousePress); + mousekey_send(); + } +#endif + + // Toggle Serial/QWERTY steno + if (cChord == (PWR | FN | ST1 | ST2)) { +#ifndef NO_DEBUG + uprintf("Fallback Toggle\n"); +#endif + QWERSTENO = !QWERSTENO; + + goto out; + } + + // handle command mode + if (cChord == (PWR | FN | RD | RZ)) { +#ifndef NO_DEBUG + uprintf("COMMAND Toggle\n"); +#endif + if (cMode != COMMAND) { // Entering Command Mode + CMDLEN = 0; + pMode = cMode; + cMode = COMMAND; + } else { // Exiting Command Mode + cMode = pMode; + + // Press all and release all + for (int i = 0; i < CMDLEN; i++) { + register_code(CMDBUF[i]); + } + clear_keyboard(); + } + + goto out; + } + + // Handle Gaming Toggle, + if (cChord == (PWR | FN | ST4 | ST3) && keymapsCount > 1) { +#ifndef NO_DEBUG + uprintf("Switching to QMK\n"); +#endif + layer_on(1); + goto out; + } + + // Lone FN press, toggle QWERTY +#ifndef ONLYQWERTY + if (cChord == FN) { + (cMode == STENO) ? (cMode = QWERTY) : (cMode = STENO); + goto out; + } +#endif + + // Check for Plover momentary + if (cMode == QWERTY && (cChord & FN)) { + cChord ^= FN; + goto steno; + } + + // Do QWERTY and Momentary QWERTY + if (cMode == QWERTY || (cMode == COMMAND) || (cChord & (FN | PWR))) { + processChord(false); + goto out; + } + + // Fallback NKRO Steno + if (cMode == STENO && QWERSTENO) { + processChord(true); + goto out; + } + +steno: + // Hey that's a steno chord! + inChord = false; + chordIndex = 0; + cChord = 0; + return true; + +out: + cChord = 0; + inChord = false; + chordIndex = 0; + clear_keyboard(); + repEngaged = false; + for (int i = 0; i < 32; i++) + chordState[i] = 0xFFFF; + + return false; +} + +// Update Chord State +bool process_steno_user(uint16_t keycode, keyrecord_t *record) { + // Everything happens in here when steno keys come in. + // Bail on keyup + if (!record->event.pressed) return true; + + // Update key repeat timers + repTimer = timer_read(); + inChord = true; + + // Switch on the press adding to chord + bool pr = record->event.pressed; + switch (keycode) { + // Mods and stuff + case STN_ST1: pr ? (cChord |= (ST1)): (cChord &= ~(ST1)); break; + case STN_ST2: pr ? (cChord |= (ST2)): (cChord &= ~(ST2)); break; + case STN_ST3: pr ? (cChord |= (ST3)): (cChord &= ~(ST3)); break; + case STN_ST4: pr ? (cChord |= (ST4)): (cChord &= ~(ST4)); break; + case STN_FN: pr ? (cChord |= (FN)) : (cChord &= ~(FN)); break; + case STN_PWR: pr ? (cChord |= (PWR)): (cChord &= ~(PWR)); break; + case STN_N1...STN_N6: pr ? (cChord |= (LNO)): (cChord &= ~(LNO)); break; + case STN_N7...STN_NC: pr ? (cChord |= (RNO)): (cChord &= ~(RNO)); break; + + // All the letter keys + case STN_S1: pr ? (cChord |= (LSU)) : (cChord &= ~(LSU)); break; + case STN_S2: pr ? (cChord |= (LSD)) : (cChord &= ~(LSD)); break; + case STN_TL: pr ? (cChord |= (LFT)) : (cChord &= ~(LFT)); break; + case STN_KL: pr ? (cChord |= (LK)) : (cChord &= ~(LK)); break; + case STN_PL: pr ? (cChord |= (LP)) : (cChord &= ~(LP)); break; + case STN_WL: pr ? (cChord |= (LW)) : (cChord &= ~(LW)); break; + case STN_HL: pr ? (cChord |= (LH)) : (cChord &= ~(LH)); break; + case STN_RL: pr ? (cChord |= (LR)) : (cChord &= ~(LR)); break; + case STN_A: pr ? (cChord |= (LA)) : (cChord &= ~(LA)); break; + case STN_O: pr ? (cChord |= (LO)) : (cChord &= ~(LO)); break; + case STN_E: pr ? (cChord |= (RE)) : (cChord &= ~(RE)); break; + case STN_U: pr ? (cChord |= (RU)) : (cChord &= ~(RU)); break; + case STN_FR: pr ? (cChord |= (RF)) : (cChord &= ~(RF)); break; + case STN_RR: pr ? (cChord |= (RR)) : (cChord &= ~(RR)); break; + case STN_PR: pr ? (cChord |= (RP)) : (cChord &= ~(RP)); break; + case STN_BR: pr ? (cChord |= (RB)) : (cChord &= ~(RB)); break; + case STN_LR: pr ? (cChord |= (RL)) : (cChord &= ~(RL)); break; + case STN_GR: pr ? (cChord |= (RG)) : (cChord &= ~(RG)); break; + case STN_TR: pr ? (cChord |= (RT)) : (cChord &= ~(RT)); break; + case STN_SR: pr ? (cChord |= (RS)) : (cChord &= ~(RS)); break; + case STN_DR: pr ? (cChord |= (RD)) : (cChord &= ~(RD)); break; + case STN_ZR: pr ? (cChord |= (RZ)) : (cChord &= ~(RZ)); break; + } + + // Store previous state for fastQWER + if (pr) { + chordState[chordIndex] = cChord; + chordIndex++; + } + + return true; +} +void matrix_scan_user(void) { + // We abuse this for early sending of key + // Key repeat only on QWER/SYMB layers + if (cMode != QWERTY || !inChord) return; + + // Check timers +#ifndef NO_REPEAT + if (repEngaged && timer_elapsed(repTimer) > REP_DELAY) { + // Process Key for report + processChord(false); + + // Send report to host + send_keyboard_report(); + clear_keyboard(); + repTimer = timer_read(); + } + + if (!repEngaged && timer_elapsed(repTimer) > REP_INIT_DELAY) { + repEngaged = true; + } +#endif +}; + +// For Plover NKRO +uint32_t processFakeSteno(bool lookup) { + P( LSU, SEND(KC_Q);); + P( LSD, SEND(KC_A);); + P( LFT, SEND(KC_W);); + P( LP, SEND(KC_E);); + P( LH, SEND(KC_R);); + P( LK, SEND(KC_S);); + P( LW, SEND(KC_D);); + P( LR, SEND(KC_F);); + P( ST1, SEND(KC_T);); + P( ST2, SEND(KC_G);); + P( LA, SEND(KC_C);); + P( LO, SEND(KC_V);); + P( RE, SEND(KC_N);); + P( RU, SEND(KC_M);); + P( ST3, SEND(KC_Y);); + P( ST4, SEND(KC_H);); + P( RF, SEND(KC_U);); + P( RP, SEND(KC_I);); + P( RL, SEND(KC_O);); + P( RT, SEND(KC_P);); + P( RD, SEND(KC_LBRC);); + P( RR, SEND(KC_J);); + P( RB, SEND(KC_K);); + P( RG, SEND(KC_L);); + P( RS, SEND(KC_SCLN);); + P( RZ, SEND(KC_COMM);); + P( LNO, SEND(KC_1);); + P( RNO, SEND(KC_1);); + + return 0; +} + +// Traverse the chord history to a given point +// Returns the mask to use +void processChord(bool useFakeSteno) { + // Save the clean chord state + uint32_t savedChord = cChord; + + // Apply Stick Bits if needed + if (stickyBits != 0) { + cChord |= stickyBits; + for (int i = 0; i <= chordIndex; i++) + chordState[i] |= stickyBits; + } + + // Strip FN + if (cChord & FN) cChord ^= FN; + + // First we test if a whole chord was passsed + // If so we just run it handling repeat logic + if (useFakeSteno && processFakeSteno(true) == cChord) { + processFakeSteno(false); + return; + } else if (processQwerty(true) == cChord) { + processQwerty(false); + // Repeat logic + if (repeatFlag) { + restoreState(); + repeatFlag = false; + processChord(false); + } else { + saveState(cChord); + } + return; + } + + // Iterate through chord picking out the individual + // and longest chords + uint32_t bufChords[QWERBUF]; + int bufLen = 0; + uint32_t mask = 0; + + // We iterate over it multiple times to catch the longest + // chord. Then that gets addded to the mask and re run. + while (savedChord != mask) { + uint32_t test = 0; + uint32_t longestChord = 0; + + for (int i = 0; i <= chordIndex; i++) { + cChord = chordState[i] & ~mask; + if (cChord == 0) + continue; + + // Assume mid parse Sym is new chord + if (i != 0 && test != 0 && (cChord ^ test) == PWR) { + longestChord = test; + break; + } + + // Lock SYM layer in once detected + if (mask & PWR) + cChord |= PWR; + + + // Testing for keycodes + if (useFakeSteno) { + test = processFakeSteno(true); + } else { + test = processQwerty(true); + } + + if (test != 0) { + longestChord = test; + } + } + + mask |= longestChord; + bufChords[bufLen] = longestChord; + bufLen++; + + // That's a loop of sorts, halt processing + if (bufLen >= QWERBUF) { + return; + } + } + + // Now that the buffer is populated, we run it + for (int i = 0; i < bufLen ; i++) { + cChord = bufChords[i]; + if (useFakeSteno) { + processFakeSteno(false); + } else { + processQwerty(false); + } + } + + // Save state in case of repeat + if (!repeatFlag) { + saveState(savedChord); + } + + // Restore cChord for held repeat + cChord = savedChord; + + return; +} +void saveState(uint32_t cleanChord) { + pChord = cleanChord; + pChordIndex = chordIndex; + for (int i = 0; i < 32; i++) + pChordState[i] = chordState[i]; +} +void restoreState() { + cChord = pChord; + chordIndex = pChordIndex; + for (int i = 0; i < 32; i++) + chordState[i] = pChordState[i]; +} + +// Macros for calling from keymap.c +void SEND(uint8_t kc) { + // Send Keycode, Does not work for Quantum Codes + if (cMode == COMMAND && CMDLEN < MAX_CMD_BUF) { +#ifndef NO_DEBUG + uprintf("CMD LEN: %d BUF: %d\n", CMDLEN, MAX_CMD_BUF); +#endif + CMDBUF[CMDLEN] = kc; + CMDLEN++; + } + + if (cMode != COMMAND) register_code(kc); + return; +} +void REPEAT(void) { + if (cMode != QWERTY) + return; + + repeatFlag = true; + return; +} +void SET_STICKY(uint32_t stick) { + stickyBits = stick; + return; +} +void SWITCH_LAYER(int layer) { + if (keymapsCount >= layer) + layer_on(layer); +} +void CLICK_MOUSE(uint8_t kc) { +#ifdef MOUSEKEY_ENABLE + mousekey_on(kc); + mousekey_send(); + + // Store state for later use + inMouse = true; + mousePress = kc; +#endif +} diff --git a/keyboards/georgi/sten.h b/keyboards/georgi/sten.h index fee05deca3a..5a9771d9a02 100644 --- a/keyboards/georgi/sten.h +++ b/keyboards/georgi/sten.h @@ -1,28 +1,43 @@ // 2019, g Heavy Industries +// Blessed mother of Christ, please keep this readable +// and protect us from segfaults. For thine is the clock, +// the slave and the master. Until we return from main. +// +// Amen. #include QMK_KEYBOARD_H #include "mousekey.h" #include "keymap.h" #include "keymap_steno.h" +#include "wait.h" -// Bitfield representing the current chord -uint32_t cChord = 0; +extern size_t keymapsCount; // Total keymaps +extern uint32_t cChord; // Current Chord -// See if a given chord is pressed. -// P will return -// PJ will continue processing, removing the found chord -#define P(chord, act) if (cChord == (chord)) { act; return true; } -#define PJ(chord, act) if ((cChord & (chord)) == (chord)) { cChord ^= chord; act; } +// Function defs +void processChord(bool useFakeSteno); +uint32_t processQwerty(bool lookup); +uint32_t processFakeSteno(bool lookup); +void saveState(uint32_t cChord); +void restoreState(void); + +// Macros for use in keymap.c +void SEND(uint8_t kc); +void REPEAT(void); +void SET_STICKY(uint32_t); +void SWITCH_LAYER(int); +void CLICK_MOUSE(uint8_t); + +// Keymap helper +#define P(chord, act) if (cChord == (chord)) { if (!lookup) {act;} return chord;} -// All Steno Codes // Shift to internal representation +// i.e) S(teno)R(ight)F #define STN(n) (1L< 1) { - uprintf("Switching to QMK\n"); - layer_on(1); - goto out; - } - - // Lone FN press, toggle QWERTY - if (cChord == FN) { - (cMode == STENO) ? (cMode = QWERTY) : (cMode = STENO); - goto out; - } - - // Check for Plover momentary - if (cMode == QWERTY && (cChord & FN)) { - cChord ^= FN; - goto steno; - } - - // Do QWERTY and Momentary QWERTY - if (cMode == QWERTY || (cMode == COMMAND) || (cChord & (FN | PWR))) { - if (cChord & FN) cChord ^= FN; - processQwerty(); - goto out; - } - - // Fallback NKRO Steno - if (cMode == STENO && QWERSTENO) { - processFakeSteno(); - goto out; - } - -steno: - // Hey that's a steno chord! - inChord = false; - cChord = 0; - return true; - -out: - inChord = false; - clear_keyboard(); - cChord = 0; - return false; -} - -// Update Chord State -bool process_steno_user(uint16_t keycode, keyrecord_t *record) { - // Everything happens in here when steno keys come in. - // Bail on keyup - if (!record->event.pressed) return true; - - // Update key repeat timers - repTimer = timer_read(); - inChord = true; - - // Switch on the press adding to chord - bool pr = record->event.pressed; - switch (keycode) { - // Mods and stuff - case STN_ST1: pr ? (cChord |= (ST1)): (cChord &= ~(ST1)); break; - case STN_ST2: pr ? (cChord |= (ST2)): (cChord &= ~(ST2)); break; - case STN_ST3: pr ? (cChord |= (ST3)): (cChord &= ~(ST3)); break; - case STN_ST4: pr ? (cChord |= (ST4)): (cChord &= ~(ST4)); break; - case STN_FN: pr ? (cChord |= (FN)) : (cChord &= ~(FN)); break; - case STN_PWR: pr ? (cChord |= (PWR)): (cChord &= ~(PWR)); break; - case STN_N1...STN_N6: - case STN_N7...STN_NC: pr ? (cChord |= (NUM)): (cChord &= ~(NUM)); break; - - // All the letter keys - case STN_S1: pr ? (cChord |= (LSU)) : (cChord &= ~(LSU)); break; - case STN_S2: pr ? (cChord |= (LSD)) : (cChord &= ~(LSD)); break; - case STN_TL: pr ? (cChord |= (LFT)) : (cChord &= ~(LFT)); break; - case STN_KL: pr ? (cChord |= (LK)) : (cChord &= ~(LK)); break; - case STN_PL: pr ? (cChord |= (LP)) : (cChord &= ~(LP)); break; - case STN_WL: pr ? (cChord |= (LW)) : (cChord &= ~(LW)); break; - case STN_HL: pr ? (cChord |= (LH)) : (cChord &= ~(LH)); break; - case STN_RL: pr ? (cChord |= (LR)) : (cChord &= ~(LR)); break; - case STN_A: pr ? (cChord |= (LA)) : (cChord &= ~(LA)); break; - case STN_O: pr ? (cChord |= (LO)) : (cChord &= ~(LO)); break; - case STN_E: pr ? (cChord |= (RE)) : (cChord &= ~(RE)); break; - case STN_U: pr ? (cChord |= (RU)) : (cChord &= ~(RU)); break; - case STN_FR: pr ? (cChord |= (RF)) : (cChord &= ~(RF)); break; - case STN_RR: pr ? (cChord |= (RR)) : (cChord &= ~(RR)); break; - case STN_PR: pr ? (cChord |= (RP)) : (cChord &= ~(RP)); break; - case STN_BR: pr ? (cChord |= (RB)) : (cChord &= ~(RB)); break; - case STN_LR: pr ? (cChord |= (RL)) : (cChord &= ~(RL)); break; - case STN_GR: pr ? (cChord |= (RG)) : (cChord &= ~(RG)); break; - case STN_TR: pr ? (cChord |= (RT)) : (cChord &= ~(RT)); break; - case STN_SR: pr ? (cChord |= (RS)) : (cChord &= ~(RS)); break; - case STN_DR: pr ? (cChord |= (RD)) : (cChord &= ~(RD)); break; - case STN_ZR: pr ? (cChord |= (RZ)) : (cChord &= ~(RZ)); break; - } - - // Check for key repeat in QWERTY mode - return true; -} -void matrix_scan_user(void) { - // We abuse this for early sending of key - // Key repeat only on QWER/SYMB layers - if (cMode != QWERTY) return; - - // Check timers - if (timer_elapsed(repTimer) > REP_DELAY) { - // Process Key for report - processQwerty(); - - // Send report to host - send_keyboard_report(); - repTimer = timer_read(); - } -}; - -// Helpers -bool processFakeSteno(void) { - PJ( LSU, SEND(KC_Q);); - PJ( LSD, SEND(KC_A);); - PJ( LFT, SEND(KC_W);); - PJ( LP, SEND(KC_E);); - PJ( LH, SEND(KC_R);); - PJ( LK, SEND(KC_S);); - PJ( LW, SEND(KC_D);); - PJ( LR, SEND(KC_F);); - PJ( ST1, SEND(KC_T);); - PJ( ST2, SEND(KC_G);); - PJ( LA, SEND(KC_C);); - PJ( LO, SEND(KC_V);); - PJ( RE, SEND(KC_N);); - PJ( RU, SEND(KC_M);); - PJ( ST3, SEND(KC_Y);); - PJ( ST4, SEND(KC_H);); - PJ( RF, SEND(KC_U);); - PJ( RP, SEND(KC_I);); - PJ( RL, SEND(KC_O);); - PJ( RT, SEND(KC_P);); - PJ( RD, SEND(KC_LBRC);); - PJ( RR, SEND(KC_J);); - PJ( RB, SEND(KC_K);); - PJ( RG, SEND(KC_L);); - PJ( RS, SEND(KC_SCLN);); - PJ( RZ, SEND(KC_COMM);); - PJ( NUM, SEND(KC_1);); - - return false; -} -void clickMouse(uint8_t kc) { -#ifdef MOUSEKEY_ENABLE - mousekey_on(kc); - mousekey_send(); - - // Store state for later use - inMouse = true; - mousePress = kc; -#endif -} -void SEND(uint8_t kc) { - // Send Keycode, Does not work for Quantum Codes - if (cMode == COMMAND && CMDLEN < MAX_CMD_BUF) { - uprintf("CMD LEN: %d BUF: %d\n", CMDLEN, MAX_CMD_BUF); - CMDBUF[CMDLEN] = kc; - CMDLEN++; - } - - if (cMode != COMMAND) register_code(kc); - return; -} diff --git a/keyboards/gergo/keymaps/default/rules.mk b/keyboards/gergo/keymaps/default/rules.mk index 2f825a76639..507cc97b7b6 100644 --- a/keyboards/gergo/keymaps/default/rules.mk +++ b/keyboards/gergo/keymaps/default/rules.mk @@ -12,7 +12,7 @@ MOUSEKEY_ENABLE = yes # Mouse keys(+4700), needed for baller VERBOSE = yes DEBUG_MATRIX_SCAN_RATE = no DEBUG_BALLER = no -DEBUG_MATRIX = no +DEBUG_MATRIX = yes # A bunch of stuff that you shouldn't touch unless you # know what you're doing. diff --git a/keyboards/gergo/keymaps/germ/keymap.c b/keyboards/gergo/keymaps/germ/keymap.c new file mode 100644 index 00000000000..fabd945fef6 --- /dev/null +++ b/keyboards/gergo/keymaps/germ/keymap.c @@ -0,0 +1,151 @@ +/* Good on you for modifying your layout! if you don't have + * time to read the QMK docs, a list of keycodes can be found at + * + * https://github.com/qmk/qmk_firmware/blob/master/docs/keycodes.md + * + * There's also a template for adding new layers at the bottom of this file! + */ + +#include QMK_KEYBOARD_H + +#define IGNORE_MOD_TAP_INTERRUPT +#define BASE 0 // default layer +#define SYMB 1 // symbols +#define NUMB 2 // numbers/motion + +// Blank template at the bottom + +enum customKeycodes { + URL = 1 +}; + + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { +/* Keymap 0: Basic layer + * + * ,-------------------------------------------. ,-------------------------------------------. + * | L1/ESC | Q | W | E | R | T | | Y | U | I | O | P | | \ | + * |--------+------+------+------+------+------|------. .------|------+------+------+------+------+--------| + * |Ctrl/BS | A | S | D | F | G | RMB | | | H | J | K | L | ; : | ' " | + * |--------+------+------+------+------+------|------| |------|------+------+------+------+------+--------| + * | LShift | Z | X | C | V | B | LMB | | | N | M | , < | . > | / ? | - _ | + * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' + * .----------. .-------. .------. .-----. + * | Super/Del| |Ent/ALT| | Tab | |BKSP | + * '----------' '-------' `------. '-----' + * ,-------. ,-------. + * | MMB | | PgDn | + * ,------|-------| |-------|------. + * | SYMB | NUMB | | SYMB | NUMB | + * | Space| Escape| | Mod |Space | + * | | | | | | + * `--------------' `--------------' + */ +[BASE] = LAYOUT_GERGO( +LT(NUMB, KC_ESC), KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_PIPE, +MT(MOD_LCTL, KC_BSPC), KC_A, KC_S, KC_D, KC_F, KC_G, KC_BTN2, KC_TRNS, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, +KC_RSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_BTN1, KC_BSPC, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_MINS, + + MT(MOD_LGUI, KC_DEL), MT(MOD_LALT, KC_ENT), KC_TAB, KC_BSPC, + + KC_BTN3, KC_PGDN, + LT(SYMB, KC_SPC), LT(NUMB, KC_ESC), LT(SYMB, KC_ENT), LT(NUMB, KC_SPC)), +/* Keymap 1: Symbols layer + * + * ,-------------------------------------------. ,-------------------------------------------. + * | | ! | @ | { | } | | | | | | | | | \ | | + * |--------+------+------+------+------+------|------. .------|------+------+------+------+------+--------| + * | | # | $ | ( | ) | ` | | | | + | - | / | * | % | ' " | + * |--------+------+------+------+------+------|------| |------|------+------+------+------+------+--------| + * | | % | ^ | [ | ] | ~ | | | | & | = | , | . | / ? | - _ | + * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' + * .------. .------. .------. .-----. + * | | | | | | | DEL | + * '------' '------' `------. '-----' + * ,-------. ,-------. + * | | | PgUp | + * ,------|-------| |-------|------. + * | | | | | | + * | ; | = | | = | ; | + * | | | | | | + * `--------------' `--------------' + */ +[SYMB] = LAYOUT_GERGO( +KC_TRNS, KC_EXLM, KC_AT, KC_LCBR,KC_RCBR, KC_PIPE, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_BSLS, +KC_TRNS, KC_HASH, KC_DLR, KC_LPRN,KC_RPRN, KC_GRV, KC_TRNS, KC_TRNS, KC_PLUS, KC_MINS, KC_SLSH, KC_ASTR, KC_PERC, KC_QUOT, +KC_TRNS, KC_PERC, KC_CIRC,KC_LBRC,KC_RBRC, KC_TILD, KC_TRNS, KC_TRNS, KC_AMPR, KC_EQL, KC_COMM, KC_DOT, KC_SLSH, KC_MINS, + + KC_TRNS, KC_TRNS, KC_PGUP, KC_DEL, + KC_TRNS, KC_TRNS, + KC_SCLN, KC_EQL, KC_EQL, KC_SCLN), +/* Keymap 2: Pad/Function layer + * + * ,-------------------------------------------. ,-------------------------------------------. + * | | 1 | 2 | 3 | 4 | 5 | | 6 | 7 | 8 | 9 | 0 | | + * |--------+------+------+------+------+------|------. .------|------+------+------+------+------+--------| + * | F1 | F2 | F3 | F4 | F5 | F6 | BTN1 | | | LEFT | DOWN | UP | RIGHT|VolDn | VolUp | + * |--------+------+------+------+------+------|------| |------|------+------+------+------+------+--------| + * | F7 | F8 | F9 | F10 | F11 | F12 | BTN2 | | | MLFT | MDWN | MUP | MRGHT|Ply/Pa| Skip | + * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' + * .------. .------. .------. .-----. + * | | | | | | | | + * '------' '------' `------. '-----' + * ,-------. ,-------. + * | | | PgUp | + * ,------|-------| |-------|------. + * | | | | | | + * | | | | | | + * | | | | | | + * `--------------' `--------------' + */ +[NUMB] = LAYOUT_GERGO( +KC_TRNS, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_TRNS, +KC_TRNS, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_TRNS, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT, KC_VOLD, KC_VOLU, +KC_TRNS, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_TRNS, KC_MS_L, KC_MS_D, KC_MS_U, KC_MS_R, KC_MPLY, KC_MNXT, + + KC_TRNS, KC_TRNS, KC_PGUP, KC_TRNS, + KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS) +}; + +/* Keymap template + * + * ,-------------------------------------------. ,-------------------------------------------. + * | | | | | | | | | | | | | | + * |--------+------+------+------+------+------|------. .------|------+------+------+------+------+--------| + * | | | | | | | | | | | | | | | | + * |--------+------+------+------+------+------|------| |------|------+------+------+------+------+--------| + * | | | | | | | | | | | | | | | | + * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' + * .------. .------. .------. .-----. + * | | | | | | | | + * '------' '------' `------. '-----' + * ,-------. ,-------. + * | | | | + * ,------|-------| |-------|------. + * | | | | | | + * | | | | | | + * | | | | | | + * `--------------' `--------------' +[SYMB] = LAYOUT_GERGO( +KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, +KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, +KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS), + */ + +// Runs just one time when the keyboard initializes. +void matrix_init_user(void) { + +}; + +// Runs constantly in the background, in a loop. +void matrix_scan_user(void) { + //uint8_t layer = biton32(layer_state); + biton32(layer_state); +}; + + diff --git a/keyboards/gergo/keymaps/germ/readme.md b/keyboards/gergo/keymaps/germ/readme.md new file mode 100644 index 00000000000..471a20fbdff --- /dev/null +++ b/keyboards/gergo/keymaps/germ/readme.md @@ -0,0 +1,10 @@ +# [Gergo! By g Heavy Industries](http://gboards.ca) + +![Gergo image](https://4.bp.blogspot.com/-889nMXxgSM0/XCNxwnO5kUI/AAAAAAAA6mI/tZbWgZVCBW0dyZOCGJDkjN06DVax7j8XwCLcBGAs/s1600/48422820_967732713413298_485744639215665152_n.jpg) + +This is the default keymap for Gergo, it's based heavily off of the naps62 ErgoDox layout and is aimed at a programmer friendly keymap. + +## Settings +To edit various settings, enable the 1u trackball and whatnot please modify /keyboards/gergo/keymaps/default/rules.mk + +Ideally you should copy this directory and make your changes there. If you come up with a good layout submit a PR! diff --git a/keyboards/gergo/keymaps/germ/rules.mk b/keyboards/gergo/keymaps/germ/rules.mk new file mode 100644 index 00000000000..2f825a76639 --- /dev/null +++ b/keyboards/gergo/keymaps/germ/rules.mk @@ -0,0 +1,36 @@ +#---------------------------------------------------------------------------- +# make gergo:germ:dfu +# Make sure you have dfu-programmer installed! +#---------------------------------------------------------------------------- +# Firmware options +BALLER = yes # Enable to ball out +BALLSTEP = 20 # Multiple in px to move, multiplied by layer number +SCROLLSTEP = 1 # Lines to scroll with ball +MOUSEKEY_ENABLE = yes # Mouse keys(+4700), needed for baller + +#Debug options +VERBOSE = yes +DEBUG_MATRIX_SCAN_RATE = no +DEBUG_BALLER = no +DEBUG_MATRIX = no + +# A bunch of stuff that you shouldn't touch unless you +# know what you're doing. +# +# No touchy, capiche? +SRC += matrix.c i2c_master.c +ifneq ($(strip $(BALLSTEP)),) + OPT_DEFS += -DTRKSTEP=$(strip $(BALLSTEP)) +endif +ifneq ($(strip $(SCROLLSTEP)),) + OPT_DEFS += -DSCROLLSTEP=$(strip $(SCROLLSTEP)) +endif +ifeq ($(strip $(BALLER)), yes) + OPT_DEFS += -DBALLER +endif +ifeq ($(strip $(DEBUG_BALLER)), yes) + OPT_DEFS += -DDEBUG_BALLER +endif +ifeq ($(strip $(DEBUG_MATRIX)), yes) + OPT_DEFS += -DDEBUG_MATRIX +endif From 02b74d521bf84ba776a5920289887ad418806311 Mon Sep 17 00:00:00 2001 From: Bob Date: Sun, 14 Apr 2019 14:02:41 -0400 Subject: [PATCH 107/171] fix combo enabling logic (#5610) --- quantum/process_keycode/process_combo.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/quantum/process_keycode/process_combo.c b/quantum/process_keycode/process_combo.c index a157ed48be1..2c6c9d0d5f6 100644 --- a/quantum/process_keycode/process_combo.c +++ b/quantum/process_keycode/process_combo.c @@ -126,13 +126,13 @@ static bool process_single_combo(combo_t *combo, uint16_t keycode, bool process_combo(uint16_t keycode, keyrecord_t *record) { bool is_combo_key = false; drop_buffer = false; - bool no_combo_keys_pressed = false; + bool no_combo_keys_pressed = true; for (current_combo_index = 0; current_combo_index < COMBO_COUNT; ++current_combo_index) { combo_t *combo = &key_combos[current_combo_index]; is_combo_key |= process_single_combo(combo, keycode, record); - no_combo_keys_pressed |= NO_COMBO_KEYS_ARE_DOWN; + no_combo_keys_pressed = no_combo_keys_pressed && NO_COMBO_KEYS_ARE_DOWN; } if (drop_buffer) { From e7e13ebdd7dfa6b89326cc1b915539492153b648 Mon Sep 17 00:00:00 2001 From: roguepullrequest Date: Sun, 14 Apr 2019 13:32:11 -0500 Subject: [PATCH 108/171] =?UTF-8?q?[Docs]=20Adding=20Alt=E2=86=AFTab=20exa?= =?UTF-8?q?mple=20macro=20(#5616)?= MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit --- docs/feature_macros.md | 47 +++++++++++++++++++++++++++++++++++++++++- 1 file changed, 46 insertions(+), 1 deletion(-) diff --git a/docs/feature_macros.md b/docs/feature_macros.md index 743fc3ad550..fe45016e3b9 100644 --- a/docs/feature_macros.md +++ b/docs/feature_macros.md @@ -195,6 +195,49 @@ This will clear all mods currently pressed. This will clear all keys besides the mods currently pressed. +## Advanced Example: + +### Super ALT↯TAB + +This macro will register `KC_LALT` and tap `KC_TAB`, then wait for 1000ms. If the key is tapped again, it will send another `KC_TAB`; if there is no tap, `KC_LALT` will be unregistered, thus allowing you to cycle through windows. + +```c +bool is_alt_tab_active = false; # ADD this near the begining of keymap.c +uint16_t alt_tab_timer = 0; # we will be using them soon. + +enum custom_keycodes { # Make sure have the awesome keycode ready + ALT_TAB = SAFE_RANGE, +}; + +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + switch (keycode) { # This will do most of the grunt work with the keycodes. + case ALT_TAB: + if (record->event.pressed) { + if (!is_alt_tab_active) { + is_alt_tab_active = true; + register_code(KC_LALT); + } + alt_tab_timer = timer_read(); + register_code(KC_TAB); + } else { + unregister_code(KC_TAB); + } + break; + } + return true; +} + +void matrix_scan_user(void) { # The very important timer. + if (is_alt_tab_active) { + if (timer_elapsed(alt_tab_timer) > 1000) { + unregister_code16(LALT(KC_TAB)); + is_alt_tab_active = false; + } + } +} +``` + +--- ## **(DEPRECATED)** The Old Way: `MACRO()` & `action_get_macro` @@ -273,7 +316,9 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { ``` -### Advanced Example: Single-Key Copy/Paste +## Advanced Example: + +### Single-Key Copy/Paste This example defines a macro which sends `Ctrl-C` when pressed down, and `Ctrl-V` when released. From d7ba190cd9b90bce3a00dfa2a9afe4b3bf0a1dbb Mon Sep 17 00:00:00 2001 From: roguepullrequest Date: Sun, 14 Apr 2019 13:35:21 -0500 Subject: [PATCH 109/171] [Keymap] First publish of roguepullreqest programmer dvorak planck layout (#5612) * First publish of roguepullreqest programmer dvorak planck layout * Removed junk line * Update keyboards/planck/keymaps/roguepullrequest/keymap.c Co-Authored-By: roguepullrequest * Update keyboards/planck/keymaps/roguepullrequest/keymap.c Co-Authored-By: roguepullrequest * Update keyboards/planck/keymaps/roguepullrequest/keymap.c Co-Authored-By: roguepullrequest * Update keyboards/planck/keymaps/roguepullrequest/keymap.c Co-Authored-By: roguepullrequest * Removed layer songs Removed layer songs for cleanliness. Will use them later. * Update keyboards/planck/keymaps/roguepullrequest/readme.md Co-Authored-By: roguepullrequest --- .../planck/keymaps/roguepullrequest/config.h | 8 + .../planck/keymaps/roguepullrequest/keymap.c | 183 ++++++++++++++++++ .../planck/keymaps/roguepullrequest/readme.md | 15 ++ .../planck/keymaps/roguepullrequest/rules.mk | 4 + 4 files changed, 210 insertions(+) create mode 100644 keyboards/planck/keymaps/roguepullrequest/config.h create mode 100644 keyboards/planck/keymaps/roguepullrequest/keymap.c create mode 100644 keyboards/planck/keymaps/roguepullrequest/readme.md create mode 100644 keyboards/planck/keymaps/roguepullrequest/rules.mk diff --git a/keyboards/planck/keymaps/roguepullrequest/config.h b/keyboards/planck/keymaps/roguepullrequest/config.h new file mode 100644 index 00000000000..13d3a6370f7 --- /dev/null +++ b/keyboards/planck/keymaps/roguepullrequest/config.h @@ -0,0 +1,8 @@ +#pragma once + + + + +#ifdef AUDIO_ENABLE + #define STARTUP_SONG SONG(RICK_ROLL) +#endif diff --git a/keyboards/planck/keymaps/roguepullrequest/keymap.c b/keyboards/planck/keymaps/roguepullrequest/keymap.c new file mode 100644 index 00000000000..64d9cfb2b7b --- /dev/null +++ b/keyboards/planck/keymaps/roguepullrequest/keymap.c @@ -0,0 +1,183 @@ +#include QMK_KEYBOARD_H + +#ifdef AUDIO_ENABLE + float mushroom[][2] = SONG(MARIO_MUSHROOM); +#endif + +extern keymap_config_t keymap_config; + +// Complex Tapdance hoopla +typedef struct { + bool is_press_action; + int state; +} tap; + +enum { + SINGLE_TAP = 1, + SINGLE_HOLD = 2, + DOUBLE_TAP = 3, + DOUBLE_HOLD = 4, + TRIPLE_TAP = 5, + TRIPLE_HOLD = 6, +}; + +// Tap dance enums +enum { + X_AT_FUN = 0, + SH_M_LPAREN, + SH_M_RPAREN +}; + +int cur_dance (qk_tap_dance_state_t *state); + +void x_finished (qk_tap_dance_state_t *state, void *user_data); +void x_reset (qk_tap_dance_state_t *state, void *user_data); + +bool is_alt_tab_active = false; +uint16_t alt_tab_timer = 0; + +// Modified Programmer Dvorak enums + +enum planck_layers { + _PDVORAK, + _UPPER, + _LOWER, + _FUNCTION, +}; + +enum custom_keycodes { + PDVK = SAFE_RANGE, + KC_LAST, + ALT_TAB +}; + +// For getting the last arg in shell line (SUPER THANKS to Drashna over on Discord) + +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + static uint16_t macro_timer; + + switch (keycode) { + case ALT_TAB: + if (record->event.pressed) { + if (!is_alt_tab_active) { + is_alt_tab_active = true; + register_code(KC_LALT); + } + alt_tab_timer = timer_read(); + register_code(KC_TAB); + } else { + unregister_code(KC_TAB); + } + break; + } + + switch (keycode){ + case KC_LAST: + if(record->event.pressed){ + macro_timer = timer_read(); + register_mods(MOD_BIT(KC_LCTRL)); + } else { + unregister_mods(MOD_BIT(KC_LCTRL)); + if (timer_elapsed(macro_timer) < 150) { + SEND_STRING("!$"); + } + } + return false; + } + return true; +} + +void matrix_scan_user(void) { + if (is_alt_tab_active) { + if (timer_elapsed(alt_tab_timer) > 1000) { + unregister_code16(KC_LALT); + is_alt_tab_active = false; + } + } +} + +#define PDVORAK MO(_PDVORAK) +#define LOWER MO(_LOWER) +#define UPPER MO(_UPPER) + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + +/* Programmer Dvorak */ + [_PDVORAK] = LAYOUT_planck_grid( + KC_GESC, KC_SCOLON, KC_COMMA, KC_DOT, KC_P, KC_Y, KC_F, KC_G, KC_C, KC_R, KC_L, KC_BSPC, + KC_LAST, KC_A, KC_O, KC_E, KC_U, KC_I, KC_D, KC_H, KC_T, KC_N, KC_S, KC_SLASH, + KC_LSPO, KC_QUOT, KC_Q, KC_J, KC_K, KC_X, KC_B, KC_M, KC_W, KC_V, KC_Z, KC_RSPC, + TD(X_AT_FUN), KC_LEFT, KC_DOWN, KC_UP, KC_RIGHT, ALT_TAB, KC_SPACE, KC_ENTER, MT(MOD_LCTL | MOD_LSFT, KC_LGUI), KC_PGUP, KC_PGDN, LT(_LOWER, KC_PLUS) + ), + + [_UPPER] = LAYOUT_planck_grid( + KC_GRAVE, KC_AMPR, KC_PERC, KC_LBRC, KC_LCBR, KC_EQL, KC_ASTR, KC_RCBR, KC_RBRC, KC_EXLM, KC_HASH, KC_TRNS, + KC_PLUS, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_MINUS, KC_BSLASH, + KC_TRNS, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, + KC_TRNS, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_TRNS + ), + + [_LOWER] = LAYOUT_planck_grid( + KC_DLR, KC_7, KC_5, KC_3, KC_1, KC_9, KC_0, KC_2, KC_4, KC_6, KC_8, KC_TRNS, + KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, + KC_NO, CK_DOWN, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, + KC_TRNS, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_TRNS + ), + + [_FUNCTION] = LAYOUT_planck_grid( + KC_F11, KC_F7, KC_F5, KC_F3, KC_F1, KC_F9, KC_F12, KC_F2, KC_F4, KC_F6, KC_F8, RESET, + KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, + KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, + KC_TRNS, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_TRNS + ), +}; + + +// Super crazy tap dancing stuff - see quad dance in feature_tap_dance.md + +int cur_dance (qk_tap_dance_state_t *state) { + if (state->count == 1) { + if (state->interrupted || !state->pressed) return SINGLE_TAP; + // key not interrupted, but still held sends 'HOLD' + else return SINGLE_HOLD; + } + else if (state->count == 2) { + if (state->interrupted || !state->pressed) return DOUBLE_TAP; + else return DOUBLE_HOLD; + } + else return 8; // magic number that i dont believe works. +} + +// instance of tap for the 'X' dance. +static tap xtap_state = { + .is_press_action = true, + .state = 0 +}; + +// registering keypresses +void x_finished (qk_tap_dance_state_t *state, void *user_data) { + xtap_state.state = cur_dance(state); + switch (xtap_state.state) { + case SINGLE_TAP: register_code16(KC_AT); break; + case SINGLE_HOLD: set_oneshot_layer(_UPPER, ONESHOT_START); break; + case DOUBLE_TAP: set_oneshot_layer(_FUNCTION, ONESHOT_START); break; + case DOUBLE_HOLD: reset_keyboard(); break; + } +} +// forgetting keypresses + +void x_reset (qk_tap_dance_state_t *state, void *user_data) { + switch (xtap_state.state) { + case SINGLE_TAP: unregister_code16(KC_AT); break; + case SINGLE_HOLD: clear_oneshot_layer_state(ONESHOT_PRESSED); break; + case DOUBLE_TAP: clear_oneshot_layer_state(ONESHOT_PRESSED); break; + case DOUBLE_HOLD: reset_keyboard(); break; + } + xtap_state.state = 0; +} + +qk_tap_dance_action_t tap_dance_actions[] = { + [X_AT_FUN] = ACTION_TAP_DANCE_FN_ADVANCED(NULL, x_finished, x_reset) +}; + +void shutdown_user(void) { clear_keyboard(); } diff --git a/keyboards/planck/keymaps/roguepullrequest/readme.md b/keyboards/planck/keymaps/roguepullrequest/readme.md new file mode 100644 index 00000000000..d3cae22fff0 --- /dev/null +++ b/keyboards/planck/keymaps/roguepullrequest/readme.md @@ -0,0 +1,15 @@ +# Programmer Dvorak for the Planck (Light) + + +| Magic | | UPPER | +|----------|---------|-------| +| | DEFAULT | | +| FUNCTION | | LOWER | + +# Layout notes +- ALT_TAB = cycle through windows as long as you keep tapping it keeps alt tabbing +- LAST = "!$" = is useful for using the last parm in bash/zsh +- More to come + + +# Dvorak base Layer diff --git a/keyboards/planck/keymaps/roguepullrequest/rules.mk b/keyboards/planck/keymaps/roguepullrequest/rules.mk new file mode 100644 index 00000000000..9394c96e5b7 --- /dev/null +++ b/keyboards/planck/keymaps/roguepullrequest/rules.mk @@ -0,0 +1,4 @@ +AUDIO_ENABLE = yes +COMMAND_ENABLE = no +TERMINAL_ENABLE = no +TAP_DANCE_ENABLE = yes From 5fcd744ddba591829a129560992b2e43fb615d4d Mon Sep 17 00:00:00 2001 From: XScorpion2 Date: Sun, 14 Apr 2019 20:50:35 -0400 Subject: [PATCH 110/171] Features/ws2812 matrix driver (#5418) * WS2812 driver implementation for RGB Matrix * Added driver configuration docs --- common_features.mk | 7 +- docs/feature_rgb_matrix.md | 24 ++++++- drivers/avr/ws2812.c | 25 +++++++ drivers/avr/ws2812.h | 5 +- keyboards/sol/keymaps/kageurufu/rules.mk | 7 +- keyboards/sol/rev1/config.h | 6 +- keyboards/sol/rev1/rev1.c | 83 +++++++++++++++++++++++- quantum/rgb_matrix.h | 6 +- quantum/rgb_matrix_drivers.c | 21 ++++++ quantum/rgblight.c | 4 ++ users/kageurufu/rules.mk | 2 +- 11 files changed, 177 insertions(+), 13 deletions(-) diff --git a/common_features.mk b/common_features.mk index c3b6fa91684..bd1685869d0 100644 --- a/common_features.mk +++ b/common_features.mk @@ -114,7 +114,7 @@ ifeq ($(strip $(RGBLIGHT_ENABLE)), yes) endif endif -VALID_MATRIX_TYPES := yes IS31FL3731 IS31FL3733 IS31FL3737 custom +VALID_MATRIX_TYPES := yes IS31FL3731 IS31FL3733 IS31FL3737 WS2812 custom LED_MATRIX_ENABLE ?= no ifneq ($(strip $(LED_MATRIX_ENABLE)), no) @@ -172,6 +172,11 @@ ifeq ($(strip $(RGB_MATRIX_ENABLE)), IS31FL3737) SRC += i2c_master.c endif +ifeq ($(strip $(RGB_MATRIX_ENABLE)), WS2812) + OPT_DEFS += -DWS2812 + SRC += ws2812.c +endif + ifeq ($(strip $(TAP_DANCE_ENABLE)), yes) OPT_DEFS += -DTAP_DANCE_ENABLE SRC += $(QUANTUM_DIR)/process_keycode/process_tap_dance.c diff --git a/docs/feature_rgb_matrix.md b/docs/feature_rgb_matrix.md index 36d9d011362..e744ecc4920 100644 --- a/docs/feature_rgb_matrix.md +++ b/docs/feature_rgb_matrix.md @@ -5,7 +5,7 @@ This feature allows you to use RGB LED matrices driven by external drivers. It h If you want to use single color LED's you should use the [LED Matrix Subsystem](feature_led_matrix.md) instead. ## Driver configuration - +--- ### IS31FL3731 There is basic support for addressable RGB matrix lighting with the I2C IS31FL3731 RGB controller. To enable it, add this to your `rules.mk`: @@ -52,6 +52,7 @@ const is31_led g_is31_leds[DRIVER_LED_TOTAL] = { Where `Cx_y` is the location of the LED in the matrix defined by [the datasheet](http://www.issi.com/WW/pdf/31FL3731.pdf) and the header file `drivers/issi/is31fl3731.h`. The `driver` is the index of the driver you defined in your `config.h` (`0` or `1` right now). +--- ### IS31FL3733/IS31FL3737 !> For the IS31FL3737, replace all instances of `IS31FL3733` below with `IS31FL3737`. @@ -102,6 +103,27 @@ const is31_led g_is31_leds[DRIVER_LED_TOTAL] = { Where `X_Y` is the location of the LED in the matrix defined by [the datasheet](http://www.issi.com/WW/pdf/31FL3733.pdf) and the header file `drivers/issi/is31fl3733.h`. The `driver` is the index of the driver you defined in your `config.h` (Only `0` right now). +--- + +### WS2812 (AVR only) + +There is basic support for addressable RGB matrix lighting with a WS2811/WS2812{a,b,c} addressable LED strand. To enable it, add this to your `rules.mk`: + +```C +RGB_MATRIX_ENABLE = WS2812 +``` + +Configure the hardware via your `config.h`: + +```C +// The pin connected to the data pin of the LEDs +#define RGB_DI_PIN D7 +// The number of LEDs connected +#define DRIVER_LED_TOTAL 70 +``` + +--- + From this point forward the configuration is the same for all the drivers. ```C diff --git a/drivers/avr/ws2812.c b/drivers/avr/ws2812.c index 5bd837ec754..b3ed4fd0b0a 100644 --- a/drivers/avr/ws2812.c +++ b/drivers/avr/ws2812.c @@ -27,6 +27,12 @@ #include #include "debug.h" +#if !defined(LED_ARRAY) && defined(RGB_MATRIX_ENABLE) +// LED color buffer +LED_TYPE led[DRIVER_LED_TOTAL]; + #define LED_ARRAY led +#endif + #ifdef RGBW_BB_TWI // Port for the I2C @@ -141,6 +147,25 @@ unsigned char I2C_Write(unsigned char c) #endif +#ifdef RGB_MATRIX_ENABLE +// Set an led in the buffer to a color +void inline ws2812_setled(int i, uint8_t r, uint8_t g, uint8_t b) +{ + led[i].r = r; + led[i].g = g; + led[i].b = b; +} + +void ws2812_setled_all (uint8_t r, uint8_t g, uint8_t b) +{ + for (int i = 0; i < RGBLED_NUM; i++) { + led[i].r = r; + led[i].g = g; + led[i].b = b; + } +} +#endif + // Setleds for standard RGB void inline ws2812_setleds(LED_TYPE *ledarray, uint16_t leds) { diff --git a/drivers/avr/ws2812.h b/drivers/avr/ws2812.h index 1f9299ffb53..ecb1dc4d18c 100644 --- a/drivers/avr/ws2812.h +++ b/drivers/avr/ws2812.h @@ -30,7 +30,6 @@ #include "rgblight_types.h" - /* User Interface * * Input: @@ -43,6 +42,10 @@ * - Send out the LED data * - Wait 50�s to reset the LEDs */ +#ifdef RGB_MATRIX_ENABLE +void ws2812_setled (int index, uint8_t r, uint8_t g, uint8_t b); +void ws2812_setled_all (uint8_t r, uint8_t g, uint8_t b); +#endif void ws2812_setleds (LED_TYPE *ledarray, uint16_t number_of_leds); void ws2812_setleds_pin (LED_TYPE *ledarray, uint16_t number_of_leds,uint8_t pinmask); diff --git a/keyboards/sol/keymaps/kageurufu/rules.mk b/keyboards/sol/keymaps/kageurufu/rules.mk index d098168fd5e..bb502be00dc 100644 --- a/keyboards/sol/keymaps/kageurufu/rules.mk +++ b/keyboards/sol/keymaps/kageurufu/rules.mk @@ -4,14 +4,15 @@ # BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) MOUSEKEY_ENABLE = no # Mouse keys(+4700) + EXTRAKEY_ENABLE = yes # Audio control and System control(+450) CONSOLE_ENABLE = yes # Console for debug(+400) COMMAND_ENABLE = yes # Commands for debug and configuration NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work -RGBLIGHT_ENABLE = yes # Enable global lighting effects. Do not enable with RGB Matrix -LED_ANIMATIONS = yes # LED animations +RGBLIGHT_ENABLE = no # Enable global lighting effects. Do not enable with RGB Matrix +RGBLIGHT_ANIMATIONS = no # LED animations LED_MIRRORED = no # Mirror LEDs across halves (enable DIP 1 on slave, and DIP 2 and 3 on master) -RGB_MATRIX_ENABLE = no # Enable per-key coordinate based RGB effects. Do not enable with RGBlight (+8500) +RGB_MATRIX_ENABLE = WS2812 # Enable per-key coordinate based RGB effects. Do not enable with RGBlight (+8500) RGB_MATRIX_KEYPRESSES = no # Enable reactive per-key effects. Can be very laggy (+1500) RGBLIGHT_FULL_POWER = no # Allow maximum RGB brightness. Otherwise, limited to a safe level for a normal USB-A port UNICODE_ENABLE = no # Unicode diff --git a/keyboards/sol/rev1/config.h b/keyboards/sol/rev1/config.h index bfdadf9f6c6..1ef373f9631 100644 --- a/keyboards/sol/rev1/config.h +++ b/keyboards/sol/rev1/config.h @@ -81,8 +81,7 @@ along with this program. If not, see . #define ws2812_PORTREG PORTD #define ws2812_DDRREG DDRD -#define DRIVER_COUNT 2 -#define DRIVER_LED_TOTAL 70 +#define DRIVER_COUNT 1 // #define RGB_MATRIX_KEYPRESSES #define BACKLIGHT_PIN B7 #define BACKLIGHT_LEVELS 5 @@ -92,6 +91,7 @@ along with this program. If not, see . #else #define RGBLED_NUM 70 #endif +#define DRIVER_LED_TOTAL RGBLED_NUM #define RGBLIGHT_RAINBOW_SWIRL_RANGE 1950 @@ -112,6 +112,8 @@ along with this program. If not, see . #define RGBLIGHT_ANIMATIONS +#define LED_HITS_TO_REMEMBER 5 + #if defined(RGBLIGHT_ENABLE) && !defined(IOS_DEVICE_ENABLE) // USB_MAX_POWER_CONSUMPTION value for Helix keyboard // 120 RGBoff, OLEDoff diff --git a/keyboards/sol/rev1/rev1.c b/keyboards/sol/rev1/rev1.c index 01ab577d457..9d869a4af42 100644 --- a/keyboards/sol/rev1/rev1.c +++ b/keyboards/sol/rev1/rev1.c @@ -1,6 +1,5 @@ #include "sol.h" - #ifdef SSD1306OLED void led_set_kb(uint8_t usb_led) { // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here @@ -8,8 +7,88 @@ void led_set_kb(uint8_t usb_led) { } #endif -void matrix_init_kb(void) { +#ifdef RGB_MATRIX_ENABLE + const rgb_led g_rgb_leds[DRIVER_LED_TOTAL] = { + // Left Hand Mapped Left to Right + { { 0 | (0 << 4) }, { 0, 0 }, 1}, + { { 0 | (1 << 4) }, { 22, 0 }, 0}, + { { 0 | (2 << 4) }, { 37, 0 }, 0}, + { { 0 | (3 << 4) }, { 37, 0 }, 0}, + { { 0 | (4 << 4) }, { 67, 0 }, 0}, + { { 0 | (5 << 4) }, { 82, 0 }, 0}, + { { 0 | (6 << 4) }, { 104, 0 }, 1}, + { { 1 | (0 << 4) }, { 0, 16 }, 1}, + { { 1 | (1 << 4) }, { 22, 16 }, 0}, + { { 1 | (2 << 4) }, { 37, 16 }, 0}, + { { 1 | (3 << 4) }, { 37, 16 }, 0}, + { { 1 | (4 << 4) }, { 67, 16 }, 0}, + { { 1 | (5 << 4) }, { 82, 16 }, 0}, + { { 1 | (6 << 4) }, { 104, 16 }, 1}, + { { 2 | (0 << 4) }, { 0, 32 }, 1}, + { { 2 | (1 << 4) }, { 22, 32 }, 0}, + { { 2 | (2 << 4) }, { 37, 32 }, 0}, + { { 2 | (3 << 4) }, { 37, 32 }, 0}, + { { 2 | (4 << 4) }, { 67, 32 }, 0}, + { { 2 | (5 << 4) }, { 82, 32 }, 0}, + { { 2 | (6 << 4) }, { 104, 32 }, 1}, + { { 3 | (0 << 4) }, { 0, 48 }, 1}, + { { 3 | (1 << 4) }, { 22, 48 }, 0}, + { { 3 | (2 << 4) }, { 37, 48 }, 0}, + { { 3 | (3 << 4) }, { 37, 48 }, 0}, + { { 3 | (4 << 4) }, { 67, 48 }, 0}, + { { 3 | (5 << 4) }, { 82, 48 }, 0}, + { { 3 | (6 << 4) }, { 104, 48 }, 1}, + { { 4 | (0 << 4) }, { 0, 64 }, 1}, + { { 4 | (1 << 4) }, { 22, 64 }, 1}, + { { 4 | (2 << 4) }, { 37, 64 }, 1}, + { { 4 | (3 << 4) }, { 37, 64 }, 1}, + { { 4 | (4 << 4) }, { 67, 64 }, 1}, + // These two control the 4 LEDs in the thumb cluster + // Top keys are { 4 | (5 << 4) & { 4 | (6 << 4) + { { 5 | (5 << 4) }, { 89, 45 }, 1}, + { { 5 | (6 << 4) }, { 97, 55 }, 1}, + // Left Hand Mapped Right to Left + { { 6 | (0 << 4) }, { 224, 0 }, 1}, + { { 6 | (1 << 4) }, { 202, 0 }, 0}, + { { 6 | (2 << 4) }, { 187, 0 }, 0}, + { { 6 | (3 << 4) }, { 172, 0 }, 0}, + { { 6 | (4 << 4) }, { 157, 0 }, 0}, + { { 6 | (5 << 4) }, { 142, 0 }, 0}, + { { 6 | (6 << 4) }, { 120, 0 }, 1}, + { { 7 | (0 << 4) }, { 224, 16 }, 1}, + { { 7 | (1 << 4) }, { 202, 16 }, 0}, + { { 7 | (2 << 4) }, { 187, 16 }, 0}, + { { 7 | (3 << 4) }, { 172, 16 }, 0}, + { { 7 | (4 << 4) }, { 157, 16 }, 0}, + { { 7 | (5 << 4) }, { 142, 16 }, 0}, + { { 7 | (6 << 4) }, { 120, 16 }, 1}, + { { 8 | (0 << 4) }, { 224, 32 }, 1}, + { { 8 | (1 << 4) }, { 202, 32 }, 0}, + { { 8 | (2 << 4) }, { 187, 32 }, 0}, + { { 8 | (3 << 4) }, { 172, 32 }, 0}, + { { 8 | (4 << 4) }, { 157, 32 }, 0}, + { { 8 | (5 << 4) }, { 142, 32 }, 0}, + { { 8 | (6 << 4) }, { 120, 32 }, 1}, + { { 9 | (0 << 4) }, { 224, 48 }, 1}, + { { 9 | (1 << 4) }, { 202, 48 }, 0}, + { { 9 | (2 << 4) }, { 187, 48 }, 0}, + { { 9 | (3 << 4) }, { 172, 48 }, 0}, + { { 9 | (4 << 4) }, { 157, 48 }, 0}, + { { 9 | (5 << 4) }, { 142, 48 }, 0}, + { { 9 | (6 << 4) }, { 120, 48 }, 1}, + { { 10 | (0 << 4) }, { 224, 64 }, 1}, + { { 10 | (1 << 4) }, { 202, 64 }, 1}, + { { 10 | (2 << 4) }, { 187, 64 }, 1}, + { { 10 | (3 << 4) }, { 172, 64 }, 1}, + { { 10 | (4 << 4) }, { 157, 64 }, 1}, + // These two control the 4 LEDs in the thumb cluster + // Top keys are { 10 | (5 << 4) & { 10 | (6 << 4) + { { 11 | (5 << 4) }, { 135, 45 }, 1}, + { { 11 | (6 << 4) }, { 127, 55 }, 1} + }; +#endif +void matrix_init_kb(void) { matrix_init_user(); }; diff --git a/quantum/rgb_matrix.h b/quantum/rgb_matrix.h index 0e193dcb2f9..0a11f269205 100644 --- a/quantum/rgb_matrix.h +++ b/quantum/rgb_matrix.h @@ -28,9 +28,11 @@ #ifdef IS31FL3731 #include "is31fl3731.h" #elif defined (IS31FL3733) - #include "is31fl3733.h" + #include "is31fl3733.h" #elif defined (IS31FL3737) - #include "is31fl3737.h" + #include "is31fl3737.h" +#elif defined (WS2812) + #include "ws2812.h" #endif #ifndef RGB_MATRIX_LED_FLUSH_LIMIT diff --git a/quantum/rgb_matrix_drivers.c b/quantum/rgb_matrix_drivers.c index 3b7d58483ab..3814dd61fc9 100644 --- a/quantum/rgb_matrix_drivers.c +++ b/quantum/rgb_matrix_drivers.c @@ -97,4 +97,25 @@ const rgb_matrix_driver_t rgb_matrix_driver = { }; #endif +#elif defined(WS2812) + +extern LED_TYPE led[RGBLED_NUM]; + + static void flush( void ) + { + // Assumes use of RGB_DI_PIN + ws2812_setleds(led, RGBLED_NUM); + } + + static void init( void ) + { + + } + + const rgb_matrix_driver_t rgb_matrix_driver = { + .init = init, + .flush = flush, + .set_color = ws2812_setled, + .set_color_all = ws2812_setled_all, + }; #endif diff --git a/quantum/rgblight.c b/quantum/rgblight.c index 08515564bc3..e2410424e4b 100644 --- a/quantum/rgblight.c +++ b/quantum/rgblight.c @@ -63,7 +63,11 @@ const uint16_t RGBLED_GRADIENT_RANGES[] PROGMEM = {360, 240, 180, 120, 90}; rgblight_config_t rgblight_config; bool is_rgblight_initialized = false; +#ifndef LED_ARRAY LED_TYPE led[RGBLED_NUM]; + #define LED_ARRAY led +#endif + bool rgblight_timer_enabled = false; static uint8_t clipping_start_pos = 0; diff --git a/users/kageurufu/rules.mk b/users/kageurufu/rules.mk index 1bd16e2626c..df9ae559a64 100644 --- a/users/kageurufu/rules.mk +++ b/users/kageurufu/rules.mk @@ -11,5 +11,5 @@ MOUSEKEY_ENABLE = no EXTRAKEY_ENABLE = yes COMMAND_ENABLE = yes CONSOLE_ENABLE = yes -RGBLIGHT_ENABLE = yes +RGBLIGHT_ENABLE = no RGBLIGHT_ANIMATIONS = yes From 49746830402cc0e1c0227c6c3c06ebc22fcd016c Mon Sep 17 00:00:00 2001 From: iw0rm3r <49209191+iw0rm3r@users.noreply.github.com> Date: Mon, 15 Apr 2019 06:58:56 +0300 Subject: [PATCH 111/171] [Keyboard] IBM Model M (ANSI/ISO) Teensy 2.0++ conversion (#5560) * Added initial modelm101 config * Update keyboards/modelm101/keymaps/default/keymap.c Co-Authored-By: iw0rm3r <49209191+iw0rm3r@users.noreply.github.com> * Update keyboards/modelm101/keymaps/iw0rm3r/keymap.c Co-Authored-By: iw0rm3r <49209191+iw0rm3r@users.noreply.github.com> * Update keyboards/modelm101/readme.md Co-Authored-By: iw0rm3r <49209191+iw0rm3r@users.noreply.github.com> * Added wiring notes to clarify use of the config * Small fix * Small fix * Moved modelm101 to converter directory * Added info.json file for QMK configurator * Corrected path Co-Authored-By: iw0rm3r <49209191+iw0rm3r@users.noreply.github.com> * Update keyboards/converter/modelm101/readme.md Co-Authored-By: iw0rm3r <49209191+iw0rm3r@users.noreply.github.com> * Update keyboards/converter/modelm101/modelm101.c Co-Authored-By: iw0rm3r <49209191+iw0rm3r@users.noreply.github.com> * Update keyboards/converter/modelm101/modelm101.c Co-Authored-By: iw0rm3r <49209191+iw0rm3r@users.noreply.github.com> * Update keyboards/converter/modelm101/modelm101.c Co-Authored-By: iw0rm3r <49209191+iw0rm3r@users.noreply.github.com> * Update keyboards/converter/modelm101/modelm101.c Co-Authored-By: iw0rm3r <49209191+iw0rm3r@users.noreply.github.com> * Update keyboards/converter/modelm101/modelm101.c Co-Authored-By: iw0rm3r <49209191+iw0rm3r@users.noreply.github.com> * Update keyboards/converter/modelm101/modelm101.c Co-Authored-By: iw0rm3r <49209191+iw0rm3r@users.noreply.github.com> * Replaced DDR and PORT with QMK functions --- keyboards/converter/modelm101/config.h | 123 ++++++++++++++++++ keyboards/converter/modelm101/info.json | 12 ++ .../modelm101/keymaps/default/config.h | 19 +++ .../modelm101/keymaps/default/keymap.c | 43 ++++++ .../modelm101/keymaps/default/readme.md | 1 + .../modelm101/keymaps/iw0rm3r/config.h | 19 +++ .../modelm101/keymaps/iw0rm3r/keymap.c | 43 ++++++ .../modelm101/keymaps/iw0rm3r/readme.md | 5 + keyboards/converter/modelm101/modelm101.c | 67 ++++++++++ keyboards/converter/modelm101/modelm101.h | 45 +++++++ keyboards/converter/modelm101/readme.md | 42 ++++++ keyboards/converter/modelm101/rules.mk | 81 ++++++++++++ 12 files changed, 500 insertions(+) create mode 100644 keyboards/converter/modelm101/config.h create mode 100644 keyboards/converter/modelm101/info.json create mode 100644 keyboards/converter/modelm101/keymaps/default/config.h create mode 100644 keyboards/converter/modelm101/keymaps/default/keymap.c create mode 100644 keyboards/converter/modelm101/keymaps/default/readme.md create mode 100644 keyboards/converter/modelm101/keymaps/iw0rm3r/config.h create mode 100644 keyboards/converter/modelm101/keymaps/iw0rm3r/keymap.c create mode 100644 keyboards/converter/modelm101/keymaps/iw0rm3r/readme.md create mode 100644 keyboards/converter/modelm101/modelm101.c create mode 100644 keyboards/converter/modelm101/modelm101.h create mode 100644 keyboards/converter/modelm101/readme.md create mode 100644 keyboards/converter/modelm101/rules.mk diff --git a/keyboards/converter/modelm101/config.h b/keyboards/converter/modelm101/config.h new file mode 100644 index 00000000000..97b78614ce6 --- /dev/null +++ b/keyboards/converter/modelm101/config.h @@ -0,0 +1,123 @@ +/* +Copyright 2019 iw0rm3r + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#pragma once + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0xFEED +#define PRODUCT_ID 0x0000 +#define DEVICE_VER 0x0001 +#define MANUFACTURER iw0rm3r +#define PRODUCT IBM Model M 101/102 +#define DESCRIPTION Controlled by AVR chip + +/* key matrix size */ +#define MATRIX_ROWS 8 +#define MATRIX_COLS 16 + +/* + * Keyboard Matrix Assignments + * + * Change this to how you wired your keyboard + * COLS: AVR pins used for columns, left to right + * ROWS: AVR pins used for rows, top to bottom + * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) + * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) + * +*/ +#define MATRIX_ROW_PINS { F7, F6, F5, F4, F3, F2, F1, F0 } +#define MATRIX_COL_PINS { C7, C6, C5, C4, C3, C2, C1, C0, E1, E0, D7, D6, D5, D4, D3, D2 } +#define UNUSED_PINS + +/* COL2ROW, ROW2COL*/ +#define DIODE_DIRECTION ROW2COL + +/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed (5 is default) */ +#define DEBOUNCING_DELAY 5 + +/* + * Magic Key Options + * + * Magic keys are hotkey commands that allow control over firmware functions of + * the keyboard. They are best used in combination with the HID Listen program, + * found here: https://www.pjrc.com/teensy/hid_listen.html + * + * The options below allow the magic key functionality to be changed. This is + * useful if your keyboard/keypad is missing keys and you want magic key support. + * + */ + +/* key combination for magic key command */ +/* defined by default; to change, uncomment and set to the combination you want */ +// #define IS_COMMAND() (get_mods() == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT))) + +/* control how magic key switches layers */ +//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true +//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true +//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false + +/* override magic key keymap */ +//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS +//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS +//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM +//#define MAGIC_KEY_HELP H +//#define MAGIC_KEY_HELP_ALT SLASH +//#define MAGIC_KEY_DEBUG D +//#define MAGIC_KEY_DEBUG_MATRIX X +//#define MAGIC_KEY_DEBUG_KBD K +//#define MAGIC_KEY_DEBUG_MOUSE M +//#define MAGIC_KEY_VERSION V +//#define MAGIC_KEY_STATUS S +//#define MAGIC_KEY_CONSOLE C +//#define MAGIC_KEY_LAYER0 0 +//#define MAGIC_KEY_LAYER0_ALT GRAVE +//#define MAGIC_KEY_LAYER1 1 +//#define MAGIC_KEY_LAYER2 2 +//#define MAGIC_KEY_LAYER3 3 +//#define MAGIC_KEY_LAYER4 4 +//#define MAGIC_KEY_LAYER5 5 +//#define MAGIC_KEY_LAYER6 6 +//#define MAGIC_KEY_LAYER7 7 +//#define MAGIC_KEY_LAYER8 8 +//#define MAGIC_KEY_LAYER9 9 +//#define MAGIC_KEY_BOOTLOADER B +//#define MAGIC_KEY_BOOTLOADER_ALT ESC +//#define MAGIC_KEY_LOCK CAPS +//#define MAGIC_KEY_EEPROM E +//#define MAGIC_KEY_EEPROM_CLEAR BSPACE +//#define MAGIC_KEY_NKRO N +//#define MAGIC_KEY_SLEEP_LED Z + +/* + * Feature disable options + * These options are also useful to firmware size reduction. + */ + +/* disable debug print */ +//#define NO_DEBUG + +/* disable print */ +//#define NO_PRINT + +/* disable action features */ +//#define NO_ACTION_LAYER +//#define NO_ACTION_TAPPING +//#define NO_ACTION_ONESHOT +//#define NO_ACTION_MACRO +//#define NO_ACTION_FUNCTION \ No newline at end of file diff --git a/keyboards/converter/modelm101/info.json b/keyboards/converter/modelm101/info.json new file mode 100644 index 00000000000..868cd89b1a6 --- /dev/null +++ b/keyboards/converter/modelm101/info.json @@ -0,0 +1,12 @@ +{ + "keyboard_name": "IBM Model M 101 ANSI/102 ISO", + "url": "https://github.com/iw0rm3r/qmk_firmware/tree/modelm101/keyboards/converter/modelm101", + "maintainer": "iw0rm3r", + "width": 22.5, + "height": 6.5, + "layouts": { + "LAYOUT": { + "layout": [{"label":"Esc", "x":0, "y":0}, {"label":"F1", "x":2, "y":0}, {"label":"F2", "x":3, "y":0}, {"label":"F3", "x":4, "y":0}, {"label":"F4", "x":5, "y":0}, {"label":"F5", "x":6.5, "y":0}, {"label":"F6", "x":7.5, "y":0}, {"label":"F7", "x":8.5, "y":0}, {"label":"F8", "x":9.5, "y":0}, {"label":"F9", "x":11, "y":0}, {"label":"F10", "x":12, "y":0}, {"label":"F11", "x":13, "y":0}, {"label":"F12", "x":14, "y":0}, {"label":"PrtSc", "x":15.25, "y":0}, {"label":"Scroll Lock", "x":16.25, "y":0}, {"label":"Pause", "x":17.25, "y":0}, {"label":"~", "x":0, "y":1.5}, {"label":"!", "x":1, "y":1.5}, {"label":"@", "x":2, "y":1.5}, {"label":"#", "x":3, "y":1.5}, {"label":"$", "x":4, "y":1.5}, {"label":"%", "x":5, "y":1.5}, {"label":"^", "x":6, "y":1.5}, {"label":"&", "x":7, "y":1.5}, {"label":"*", "x":8, "y":1.5}, {"label":"(", "x":9, "y":1.5}, {"label":")", "x":10, "y":1.5}, {"label":"_", "x":11, "y":1.5}, {"label":"+", "x":12, "y":1.5}, {"label":"Backspace", "x":13, "y":1.5, "w":2}, {"label":"Insert", "x":15.25, "y":1.5}, {"label":"Home", "x":16.25, "y":1.5}, {"label":"PgUp", "x":17.25, "y":1.5}, {"label":"Num Lock", "x":18.5, "y":1.5}, {"label":"/", "x":19.5, "y":1.5}, {"label":"*", "x":20.5, "y":1.5}, {"label":"-", "x":21.5, "y":1.5}, {"label":"Tab", "x":0, "y":2.5, "w":1.5}, {"label":"Q", "x":1.5, "y":2.5}, {"label":"W", "x":2.5, "y":2.5}, {"label":"E", "x":3.5, "y":2.5}, {"label":"R", "x":4.5, "y":2.5}, {"label":"T", "x":5.5, "y":2.5}, {"label":"Y", "x":6.5, "y":2.5}, {"label":"U", "x":7.5, "y":2.5}, {"label":"I", "x":8.5, "y":2.5}, {"label":"O", "x":9.5, "y":2.5}, {"label":"P", "x":10.5, "y":2.5}, {"label":"{", "x":11.5, "y":2.5}, {"label":"}", "x":12.5, "y":2.5}, {"label":"|", "x":13.5, "y":2.5, "w":1.5}, {"label":"Delete", "x":15.25, "y":2.5}, {"label":"End", "x":16.25, "y":2.5}, {"label":"PgDn", "x":17.25, "y":2.5}, {"label":"7", "x":18.5, "y":2.5}, {"label":"8", "x":19.5, "y":2.5}, {"label":"9", "x":20.5, "y":2.5}, {"label":"+", "x":21.5, "y":2.5, "h":2}, {"label":"Caps Lock", "x":0, "y":3.5, "w":1.5}, {"label":"A", "x":1.75, "y":3.5}, {"label":"S", "x":2.75, "y":3.5}, {"label":"D", "x":3.75, "y":3.5}, {"label":"F", "x":4.75, "y":3.5}, {"label":"G", "x":5.75, "y":3.5}, {"label":"H", "x":6.75, "y":3.5}, {"label":"J", "x":7.75, "y":3.5}, {"label":"K", "x":8.75, "y":3.5}, {"label":"L", "x":9.75, "y":3.5}, {"label":":", "x":10.75, "y":3.5}, {"label":"\"", "x":11.75, "y":3.5}, {"label":"~", "x":12.75, "y":3.5}, {"label":"Enter", "x":13.75, "y":3.5, "w":1.25}, {"label":"4", "x":18.5, "y":3.5}, {"label":"5", "x":19.5, "y":3.5}, {"label":"6", "x":20.5, "y":3.5}, {"label":"Shift", "x":0, "y":4.5, "w":1.25}, {"label":"|", "x":1.25, "y":4.5}, {"label":"Z", "x":2.25, "y":4.5}, {"label":"X", "x":3.25, "y":4.5}, {"label":"C", "x":4.25, "y":4.5}, {"label":"V", "x":5.25, "y":4.5}, {"label":"B", "x":6.25, "y":4.5}, {"label":"N", "x":7.25, "y":4.5}, {"label":"M", "x":8.25, "y":4.5}, {"label":"<", "x":9.25, "y":4.5}, {"label":">", "x":10.25, "y":4.5}, {"label":"?", "x":11.25, "y":4.5}, {"label":"Shift", "x":12.25, "y":4.5, "w":2.75}, {"label":"\u2191", "x":16.25, "y":4.5}, {"label":"1", "x":18.5, "y":4.5}, {"label":"2", "x":19.5, "y":4.5}, {"label":"3", "x":20.5, "y":4.5}, {"label":"Enter", "x":21.5, "y":4.5, "h":2}, {"label":"Ctrl", "x":0, "y":5.5, "w":1.5}, {"label":"Alt", "x":2.5, "y":5.5, "w":1.5}, {"x":4, "y":5.5, "w":7}, {"label":"Alt", "x":11, "y":5.5, "w":1.5}, {"label":"Ctrl", "x":13.5, "y":5.5, "w":1.5}, {"label":"\u2190", "x":15.25, "y":5.5}, {"label":"\u2193", "x":16.25, "y":5.5}, {"label":"\u2192", "x":17.25, "y":5.5}, {"label":"0", "x":18.5, "y":5.5, "w":2}, {"label":".", "x":20.5, "y":5.5}] + } + } +} \ No newline at end of file diff --git a/keyboards/converter/modelm101/keymaps/default/config.h b/keyboards/converter/modelm101/keymaps/default/config.h new file mode 100644 index 00000000000..779e5a858f9 --- /dev/null +++ b/keyboards/converter/modelm101/keymaps/default/config.h @@ -0,0 +1,19 @@ +/* Copyright 2019 iw0rm3r + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#pragma once + +// place overrides here diff --git a/keyboards/converter/modelm101/keymaps/default/keymap.c b/keyboards/converter/modelm101/keymaps/default/keymap.c new file mode 100644 index 00000000000..4a8614a3f9c --- /dev/null +++ b/keyboards/converter/modelm101/keymaps/default/keymap.c @@ -0,0 +1,43 @@ +/* Copyright 2019 iw0rm3r + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ +#include QMK_KEYBOARD_H + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [0] = LAYOUT( /* Base layer */ + KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR, KC_SLCK, KC_PAUS, + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_INS, KC_HOME, KC_PGUP, KC_NLCK, KC_PSLS, KC_PAST, KC_PMNS, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, KC_END, KC_PGDN, KC_P7, KC_P8, KC_P9, KC_PPLS, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_NUHS, KC_ENT, KC_P4, KC_P5, KC_P6, + KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_P1, KC_P2, KC_P3, KC_LGUI, + KC_LCTL, KC_LALT, KC_SPC, KC_RALT, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT, KC_P0, KC_PDOT + ), +}; + +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + return true; +} + +void matrix_init_user(void) { + +} + +void matrix_scan_user(void) { + +} + +void led_set_user(uint8_t usb_led) { + +} diff --git a/keyboards/converter/modelm101/keymaps/default/readme.md b/keyboards/converter/modelm101/keymaps/default/readme.md new file mode 100644 index 00000000000..fb91a8ebe52 --- /dev/null +++ b/keyboards/converter/modelm101/keymaps/default/readme.md @@ -0,0 +1 @@ +# The default keymap for modelm101 \ No newline at end of file diff --git a/keyboards/converter/modelm101/keymaps/iw0rm3r/config.h b/keyboards/converter/modelm101/keymaps/iw0rm3r/config.h new file mode 100644 index 00000000000..779e5a858f9 --- /dev/null +++ b/keyboards/converter/modelm101/keymaps/iw0rm3r/config.h @@ -0,0 +1,19 @@ +/* Copyright 2019 iw0rm3r + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#pragma once + +// place overrides here diff --git a/keyboards/converter/modelm101/keymaps/iw0rm3r/keymap.c b/keyboards/converter/modelm101/keymaps/iw0rm3r/keymap.c new file mode 100644 index 00000000000..26ced801e5a --- /dev/null +++ b/keyboards/converter/modelm101/keymaps/iw0rm3r/keymap.c @@ -0,0 +1,43 @@ +/* Copyright 2019 iw0rm3r + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ +#include QMK_KEYBOARD_H + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [0] = LAYOUT( /* Base layer */ + KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR, KC_SLCK, KC_PAUS, + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_INS, KC_HOME, KC_PGUP, KC_NLCK, KC_PSLS, KC_PAST, KC_PMNS, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, KC_END, KC_PGDN, KC_P7, KC_P8, KC_P9, KC_PPLS, + KC_LGUI, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_NUHS, KC_ENT, KC_P4, KC_P5, KC_P6, + KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_P1, KC_P2, KC_P3, KC_CAPS, + KC_LCTL, KC_LALT, KC_SPC, KC_RALT, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT, KC_APP, KC_PDOT + ), +}; + +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + return true; +} + +void matrix_init_user(void) { + +} + +void matrix_scan_user(void) { + +} + +void led_set_user(uint8_t usb_led) { + +} diff --git a/keyboards/converter/modelm101/keymaps/iw0rm3r/readme.md b/keyboards/converter/modelm101/keymaps/iw0rm3r/readme.md new file mode 100644 index 00000000000..17b0f40da27 --- /dev/null +++ b/keyboards/converter/modelm101/keymaps/iw0rm3r/readme.md @@ -0,0 +1,5 @@ +# This is my personal keymap for modelm101 + +Caps Lock is mapped as LGUI (Windows key). +Num Enter is mapped as Caps Lock. +Num0 is mapped as App key (context menu). \ No newline at end of file diff --git a/keyboards/converter/modelm101/modelm101.c b/keyboards/converter/modelm101/modelm101.c new file mode 100644 index 00000000000..c2204bea660 --- /dev/null +++ b/keyboards/converter/modelm101/modelm101.c @@ -0,0 +1,67 @@ +/* Copyright 2019 iw0rm3r + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ +#include "modelm101.h" + +void keyboard_pre_init_kb(void) { + /* Setting status LEDs pins to output and +5V (off) */ + setPinOutput(B4); + setPinOutput(B5); + setPinOutput(B6); + writePinHigh(B4); + writePinHigh(B5); + writePinHigh(B6); +} + +void matrix_init_kb(void) { + /* put your keyboard start-up code here + * runs once when the firmware starts up */ + + matrix_init_user(); +} + +void matrix_scan_kb(void) { + /* put your looping keyboard code here + * runs every cycle (a lot) */ + + matrix_scan_user(); +} + +bool process_record_kb(uint16_t keycode, keyrecord_t *record) { + /* put your per-action keyboard code here + * runs for every action, just before processing by the firmware */ + + return process_record_user(keycode, record); +} + +void led_set_kb(uint8_t usb_led) { + if (usb_led & (1<. + */ +#pragma once + +#include "quantum.h" + +/* This a shortcut to help you visually see your layout. + * The first section contains "names" for physical keys of the keyboard + * and defines their position on the board. + * The second section defines position of the keys on the switch matrix + * (where COLUMNS and ROWS crosses). */ + +#define LAYOUT( \ + K5A, K5B, K5C, K5D, K5E, K5F, K5G, K5H, K5I, K5J, K5K, K5L, K5M, K5N, K5O, K5P, \ + \ + K4A, K4B, K4C, K4D, K4E, K4F, K4G, K4H, K4I, K4J, K4K, K4L, K4M, K4N, K4O, K4P, K4Q, K4R, K4S, K4T, K4U, \ + K3A, K3B, K3C, K3D, K3E, K3F, K3G, K3H, K3I, K3J, K3K, K3L, K3M, K3N, K3O, K3P, K3Q, K3R, K3S, K3T, K3U, \ + K2A, K2B, K2C, K2D, K2E, K2F, K2G, K2H, K2I, K2J, K2K, K2L, K2M, K2N, K2O, K2P, K2Q, \ + K1A, K1B, K1C, K1D, K1E, K1F, K1G, K1H, K1I, K1J, K1K, K1L, K1M, K1N, K1O, K1P, K1Q, K1R, \ + K0A, K0B, K0C, K0D, K0E, K0F, K0G, K0H, K0I, K0J \ +) \ +{ \ +/* 00 */ { KC_NO, KC_NO, K5A, K1B, K5E, K2F, K5F, K2G, K5G, KC_NO, K2L, KC_NO, K0I, K0J, K1N, K0B }, \ +/* 01 */ { KC_NO, K1A, K3A, K2A, K5D, K3F, K4N, K3G, K3M, K5H, K3L, K2O, K2P, K2Q, KC_NO, KC_NO }, \ +/* 02 */ { K0A, KC_NO, K4A, K5B, K5C, K4F, K5J, K4G, K4M, K5I, K4L, K3O, K4O, K4Q, K4P, KC_NO }, \ +/* 03 */ { KC_NO, KC_NO, K4B, K4C, K4D, K4E, K5K, K4H, K4I, K4J, K4K, K5L, K5M, K3Q, K3P, K5N }, \ +/* 04 */ { KC_NO, KC_NO, K3B, K3C, K3D, K3E, KC_NO, K3H, K3I, K3J, K3K, K3R, K3S, K3T, K3U, K5O }, \ +/* 05 */ { KC_NO, KC_NO, K2B, K2C, K2D, K2E, K3N, K2H, K2I, K2J, K2K, K1O, K1P, K1Q, K1R, KC_NO }, \ +/* 06 */ { K0E, K1M, K1C, K1D, K1E, K1F, K2N, K1I, K1J, K1K, K2M, K4R, K4S, K4T, K5P, KC_NO }, \ +/* 07 */ { KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, K1G, K0C, K1H, KC_NO, KC_NO, K1L, K0G, K0H, K4U, K0F, K0D }, \ +} +/* 0 1 2 3 4 5 6 7 8 9 A B C D E F */ \ No newline at end of file diff --git a/keyboards/converter/modelm101/readme.md b/keyboards/converter/modelm101/readme.md new file mode 100644 index 00000000000..5355c800714 --- /dev/null +++ b/keyboards/converter/modelm101/readme.md @@ -0,0 +1,42 @@ +# modelm101 + +![IBM Model M 101 ANSI/102 ISO](https://i.imgur.com/DAE3W7g.jpg) + +This is a configuration for the QMK firmware for reversible conversion of IBM's Model M keyboards (common 101-key ANSI and 102-key ISO models) from stock, power-hungry controller, to a modern one, running the USB bus. +Configuration is build for the Atmel AT90USB1286 controller, which you can easily use on the Teensy 2.0++ board (produced by PJRC). +Project is heavely based on 2 other projects: +1. Teensy 2.0++-based custom Model M controller running TMK firmware ('modelm" by [lmorchard](https://blog.lmorchard.com/2016/02/21/modelm-controller/)); - had a few issues. +2. Teensy 2.0++-based custom Model M 122-key controller running QMK firmware ("ibm122m" by [lukexorz](https://github.com/lukexorz)); - had wrong layout for 101/102-key boards and no status LED support. + +For this conversion you will need: +1. Teensy 2.0++ dev board itself (can be used a different dev board, but it will require some changes in configuration); +2. Ribbon connectors to connect the membrane to a dev board. Depending on your Model M variation, you will need 1 Trio-mate 16pin connector (6-520315-6 or 6-520415-6) and 1 Trio-mate 8pin connector (5-120628-8 or 5-520314-8), or 2 Trio-mate 16pin connectors; +3. Full-sized breadboard (without power rails; half-size should do, but full-sized one looks more native) or a PCB to wire everything up; +4. A bunch of jumper wires; +5. mini-USB male cable with any USB socket you want to use to connect Teensy inside the keyboard to your PC (I use short mini-USB male to mini-USB female cable); +6. (optional) Resistors for connecting status LEDs if your LED PCB doesn't have any; +7. (optional) Double-sided tape to fix USB socket on or inside the keyboard case. + +Pins of the Teensy board you should use by default: +``` +Columns: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 +Pins: C7 C6 C5 C4 C3 C2 C1 C0 E1 E0 D7 D6 D5 D4 D3 D2 +-------------------------------------------------------- +Rows: 1 2 3 4 5 6 7 8 +Pins: F7 F6 F5 F4 F3 F2 F1 F0 +-------------------------------------------------------- +Status LEDs: CapsLock +5V ScrollLock NumLock +Pins: B6 5V B5 B4 +``` + +Please note that some versions of Model M have LED connected with a ribbon cable, and not with separate wires. + +Keyboard Maintainer: [iw0rm3r](https://github.com/iw0rm3r) +Hardware Supported: Teensy 2.0++ board by PJRC +Hardware Availability: https://www.pjrc.com/store/teensypp.html + +Make example for this keyboard (after setting up your build environment): + + make converter/modelm101:default:teensy + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/converter/modelm101/rules.mk b/keyboards/converter/modelm101/rules.mk new file mode 100644 index 00000000000..62052697151 --- /dev/null +++ b/keyboards/converter/modelm101/rules.mk @@ -0,0 +1,81 @@ +# MCU name +MCU = at90usb1286 +#MCU = atmega32u4 + +# Processor frequency. +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to +# calculate timings. Do NOT tack on a 'UL' at the end, this will be done +# automatically to create a 32-bit value in your source code. +# +# This will be an integer division of F_USB below, as it is sourced by +# F_USB after it has run through any CPU prescalers. Note that this value +# does not *change* the processor frequency - it should merely be updated to +# reflect the processor speed set externally so that the code can use accurate +# software delays. +F_CPU = 16000000 + + +# +# LUFA specific +# +# Target architecture (see library "Board Types" documentation). +ARCH = AVR8 + +# Input clock frequency. +# This will define a symbol, F_USB, in all source code files equal to the +# input clock frequency (before any prescaling is performed) in Hz. This value may +# differ from F_CPU if prescaling is used on the latter, and is required as the +# raw input clock is fed directly to the PLL sections of the AVR for high speed +# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' +# at the end, this will be done automatically to create a 32-bit value in your +# source code. +# +# If no clock division is performed on the input clock inside the AVR (via the +# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. +F_USB = $(F_CPU) + +# Interrupt driven control endpoint task(+60) +OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT + + +# Bootloader selection +# Teensy halfkay +# Pro Micro caterina +# Atmel DFU atmel-dfu +# LUFA DFU lufa-dfu +# QMK DFU qmk-dfu +# atmega32a bootloadHID +BOOTLOADER = halfkay + + +# If you don't know the bootloader type, then you can specify the +# Boot Section Size in *bytes* by uncommenting out the OPT_DEFS line +# Teensy halfKay 512 +# Teensy++ halfKay 1024 +# Atmel DFU loader 4096 +# LUFA bootloader 4096 +# USBaspLoader 2048 +#OPT_DEFS += -DBOOTLOADER_SIZE=1024 + + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = no # Mouse keys(+4700) +EXTRAKEY_ENABLE = no # Audio control and System control(+450) +CONSOLE_ENABLE = no # Console for debug(+400) +COMMAND_ENABLE = no # Commands for debug and configuration +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend +# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +NKRO_ENABLE = no # USB Nkey Rollover +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default +RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow +MIDI_ENABLE = no # MIDI support (+2400 to 4200, depending on config) +UNICODE_ENABLE = no # Unicode +BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID +AUDIO_ENABLE = no # Audio output on port C6 +FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches +HD44780_ENABLE = no # Enable support for HD44780 based LCDs (+400) From ffc82ebdb2ee00c14dd225eb057d209d4584a623 Mon Sep 17 00:00:00 2001 From: XScorpion2 Date: Mon, 15 Apr 2019 00:29:50 -0400 Subject: [PATCH 112/171] [Keyboard] Zen keyboard update for Rev2 (#5522) * Updated Zen keyboard for rev2 support * Fixing r1 compile errors * PR feedback and changes for Proton-C compile errors --- keyboards/zen/common/glcdfont.c | 239 +++++++++ keyboards/zen/config.h | 13 +- keyboards/zen/keymaps/default/rules.mk | 3 - keyboards/zen/keymaps/jwlawrence/rules.mk | 3 - keyboards/zen/keymaps/xyverz/rules.mk | 3 - keyboards/zen/matrix.c | 466 ------------------ keyboards/zen/readme.md | 19 +- keyboards/zen/rev1/config.h | 21 +- .../zen/{ => rev1}/keymaps/333fred/config.h | 0 .../zen/{ => rev1}/keymaps/333fred/keymap.c | 0 .../zen/{ => rev1}/keymaps/333fred/rules.mk | 1 - .../keymaps/default}/config.h | 5 +- .../zen/{ => rev1}/keymaps/default/keymap.c | 0 keyboards/zen/rev1/keymaps/default/rules.mk | 1 + .../keymaps/jwlawrence}/config.h | 0 .../{ => rev1}/keymaps/jwlawrence/keymap.c | 0 .../zen/rev1/keymaps/jwlawrence/rules.mk | 1 + .../zen/{ => rev1}/keymaps/kageurufu/keymap.c | 4 +- .../zen/{ => rev1}/keymaps/xyverz/config.h | 5 +- .../zen/{ => rev1}/keymaps/xyverz/keymap.c | 0 keyboards/zen/rev1/keymaps/xyverz/rules.mk | 1 + keyboards/zen/rev1/rev1.h | 5 +- keyboards/zen/rev1/rules.mk | 2 - keyboards/zen/rev2/config.h | 98 ++++ keyboards/zen/rev2/keymaps/debug/keymap.c | 19 + keyboards/zen/rev2/keymaps/default/keymap.c | 117 +++++ keyboards/zen/rev2/rev2.c | 66 +++ keyboards/zen/rev2/rev2.h | 56 +++ keyboards/zen/rev2/rules.mk | 14 + keyboards/zen/rules.mk | 71 +-- keyboards/zen/serial.c | 228 --------- keyboards/zen/serial.h | 26 - keyboards/zen/split_rgb.c | 41 -- keyboards/zen/split_rgb.h | 6 - keyboards/zen/split_util.c | 86 ---- keyboards/zen/split_util.h | 20 - keyboards/zen/zen.h | 11 +- 37 files changed, 663 insertions(+), 988 deletions(-) create mode 100644 keyboards/zen/common/glcdfont.c delete mode 100644 keyboards/zen/keymaps/default/rules.mk delete mode 100644 keyboards/zen/keymaps/jwlawrence/rules.mk delete mode 100644 keyboards/zen/keymaps/xyverz/rules.mk delete mode 100644 keyboards/zen/matrix.c rename keyboards/zen/{ => rev1}/keymaps/333fred/config.h (100%) rename keyboards/zen/{ => rev1}/keymaps/333fred/keymap.c (100%) rename keyboards/zen/{ => rev1}/keymaps/333fred/rules.mk (85%) rename keyboards/zen/{keymaps/jwlawrence => rev1/keymaps/default}/config.h (95%) rename keyboards/zen/{ => rev1}/keymaps/default/keymap.c (100%) create mode 100644 keyboards/zen/rev1/keymaps/default/rules.mk rename keyboards/zen/{keymaps/default => rev1/keymaps/jwlawrence}/config.h (100%) rename keyboards/zen/{ => rev1}/keymaps/jwlawrence/keymap.c (100%) create mode 100644 keyboards/zen/rev1/keymaps/jwlawrence/rules.mk rename keyboards/zen/{ => rev1}/keymaps/kageurufu/keymap.c (98%) rename keyboards/zen/{ => rev1}/keymaps/xyverz/config.h (94%) rename keyboards/zen/{ => rev1}/keymaps/xyverz/keymap.c (100%) create mode 100644 keyboards/zen/rev1/keymaps/xyverz/rules.mk create mode 100644 keyboards/zen/rev2/config.h create mode 100644 keyboards/zen/rev2/keymaps/debug/keymap.c create mode 100644 keyboards/zen/rev2/keymaps/default/keymap.c create mode 100644 keyboards/zen/rev2/rev2.c create mode 100644 keyboards/zen/rev2/rev2.h create mode 100644 keyboards/zen/rev2/rules.mk delete mode 100644 keyboards/zen/serial.c delete mode 100644 keyboards/zen/serial.h delete mode 100644 keyboards/zen/split_rgb.c delete mode 100644 keyboards/zen/split_rgb.h delete mode 100644 keyboards/zen/split_util.c delete mode 100644 keyboards/zen/split_util.h diff --git a/keyboards/zen/common/glcdfont.c b/keyboards/zen/common/glcdfont.c new file mode 100644 index 00000000000..3b4ccfa95c6 --- /dev/null +++ b/keyboards/zen/common/glcdfont.c @@ -0,0 +1,239 @@ +// This is the SOL 6x8 font + +#pragma once + +#ifdef __AVR__ + #include + #include +#elif defined(ESP8266) + #include +#else + #define PROGMEM +#endif + +static const unsigned char font[] PROGMEM = { + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x3E, 0x5B, 0x4F, 0x5B, 0x3E, 0x00, + 0x3E, 0x6B, 0x4F, 0x6B, 0x3E, 0x00, + 0x1C, 0x3E, 0x7C, 0x3E, 0x1C, 0x00, + 0x18, 0x3C, 0x7E, 0x3C, 0x18, 0x00, + 0x1C, 0x57, 0x7D, 0x57, 0x1C, 0x00, + 0x1C, 0x5E, 0x7F, 0x5E, 0x1C, 0x00, + 0x00, 0x18, 0x3C, 0x18, 0x00, 0x00, + 0xFF, 0xE7, 0xC3, 0xE7, 0xFF, 0x00, + 0x00, 0x18, 0x24, 0x18, 0x00, 0x00, + 0xFF, 0xE7, 0xDB, 0xE7, 0xFF, 0x00, + 0x30, 0x48, 0x3A, 0x06, 0x0E, 0x00, + 0x26, 0x29, 0x79, 0x29, 0x26, 0x00, + 0x40, 0x7F, 0x05, 0x05, 0x07, 0x00, + 0x40, 0x7F, 0x05, 0x25, 0x3F, 0x00, + 0x5A, 0x3C, 0xE7, 0x3C, 0x5A, 0x00, + 0x7F, 0x3E, 0x1C, 0x1C, 0x08, 0x00, + 0x08, 0x1C, 0x1C, 0x3E, 0x7F, 0x00, + 0x14, 0x22, 0x7F, 0x22, 0x14, 0x00, + 0x5F, 0x5F, 0x00, 0x5F, 0x5F, 0x00, + 0x06, 0x09, 0x7F, 0x01, 0x7F, 0x00, + 0x00, 0x66, 0x89, 0x95, 0x6A, 0x00, + 0x60, 0x60, 0x60, 0x60, 0x60, 0x00, + 0x94, 0xA2, 0xFF, 0xA2, 0x94, 0x00, + 0x08, 0x04, 0x7E, 0x04, 0x08, 0x00, + 0x10, 0x20, 0x7E, 0x20, 0x10, 0x00, + 0x08, 0x08, 0x2A, 0x1C, 0x08, 0x00, + 0x08, 0x1C, 0x2A, 0x08, 0x08, 0x00, + 0x1E, 0x10, 0x10, 0x10, 0x10, 0x00, + 0x0C, 0x1E, 0x0C, 0x1E, 0x0C, 0x00, + 0x30, 0x38, 0x3E, 0x38, 0x30, 0x00, + 0x06, 0x0E, 0x3E, 0x0E, 0x06, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x5F, 0x00, 0x00, 0x00, + 0x00, 0x07, 0x00, 0x07, 0x00, 0x00, + 0x14, 0x7F, 0x14, 0x7F, 0x14, 0x00, + 0x24, 0x2A, 0x7F, 0x2A, 0x12, 0x00, + 0x23, 0x13, 0x08, 0x64, 0x62, 0x00, + 0x36, 0x49, 0x56, 0x20, 0x50, 0x00, + 0x00, 0x08, 0x07, 0x03, 0x00, 0x00, + 0x00, 0x1C, 0x22, 0x41, 0x00, 0x00, + 0x00, 0x41, 0x22, 0x1C, 0x00, 0x00, + 0x2A, 0x1C, 0x7F, 0x1C, 0x2A, 0x00, + 0x08, 0x08, 0x3E, 0x08, 0x08, 0x00, + 0x00, 0x80, 0x70, 0x30, 0x00, 0x00, + 0x08, 0x08, 0x08, 0x08, 0x08, 0x00, + 0x00, 0x00, 0x60, 0x60, 0x00, 0x00, + 0x20, 0x10, 0x08, 0x04, 0x02, 0x00, + 0x3E, 0x51, 0x49, 0x45, 0x3E, 0x00, + 0x00, 0x42, 0x7F, 0x40, 0x00, 0x00, + 0x72, 0x49, 0x49, 0x49, 0x46, 0x00, + 0x21, 0x41, 0x49, 0x4D, 0x33, 0x00, + 0x18, 0x14, 0x12, 0x7F, 0x10, 0x00, + 0x27, 0x45, 0x45, 0x45, 0x39, 0x00, + 0x3C, 0x4A, 0x49, 0x49, 0x31, 0x00, + 0x41, 0x21, 0x11, 0x09, 0x07, 0x00, + 0x36, 0x49, 0x49, 0x49, 0x36, 0x00, + 0x46, 0x49, 0x49, 0x29, 0x1E, 0x00, + 0x00, 0x00, 0x14, 0x00, 0x00, 0x00, + 0x00, 0x40, 0x34, 0x00, 0x00, 0x00, + 0x00, 0x08, 0x14, 0x22, 0x41, 0x00, + 0x14, 0x14, 0x14, 0x14, 0x14, 0x00, + 0x00, 0x41, 0x22, 0x14, 0x08, 0x00, + 0x02, 0x01, 0x59, 0x09, 0x06, 0x00, + 0x3E, 0x41, 0x5D, 0x59, 0x4E, 0x00, + 0x7C, 0x12, 0x11, 0x12, 0x7C, 0x00, + 0x7F, 0x49, 0x49, 0x49, 0x36, 0x00, + 0x3E, 0x41, 0x41, 0x41, 0x22, 0x00, + 0x7F, 0x41, 0x41, 0x41, 0x3E, 0x00, + 0x7F, 0x49, 0x49, 0x49, 0x41, 0x00, + 0x7F, 0x09, 0x09, 0x09, 0x01, 0x00, + 0x3E, 0x41, 0x41, 0x51, 0x73, 0x00, + 0x7F, 0x08, 0x08, 0x08, 0x7F, 0x00, + 0x00, 0x41, 0x7F, 0x41, 0x00, 0x00, + 0x20, 0x40, 0x41, 0x3F, 0x01, 0x00, + 0x7F, 0x08, 0x14, 0x22, 0x41, 0x00, + 0x7F, 0x40, 0x40, 0x40, 0x40, 0x00, + 0x7F, 0x02, 0x1C, 0x02, 0x7F, 0x00, + 0x7F, 0x04, 0x08, 0x10, 0x7F, 0x00, + 0x3E, 0x41, 0x41, 0x41, 0x3E, 0x00, + 0x7F, 0x09, 0x09, 0x09, 0x06, 0x00, + 0x3E, 0x41, 0x51, 0x21, 0x5E, 0x00, + 0x7F, 0x09, 0x19, 0x29, 0x46, 0x00, + 0x26, 0x49, 0x49, 0x49, 0x32, 0x00, + 0x03, 0x01, 0x7F, 0x01, 0x03, 0x00, + 0x3F, 0x40, 0x40, 0x40, 0x3F, 0x00, + 0x1F, 0x20, 0x40, 0x20, 0x1F, 0x00, + 0x3F, 0x40, 0x38, 0x40, 0x3F, 0x00, + 0x63, 0x14, 0x08, 0x14, 0x63, 0x00, + 0x03, 0x04, 0x78, 0x04, 0x03, 0x00, + 0x61, 0x59, 0x49, 0x4D, 0x43, 0x00, + 0x00, 0x7F, 0x41, 0x41, 0x41, 0x00, + 0x02, 0x04, 0x08, 0x10, 0x20, 0x00, + 0x00, 0x41, 0x41, 0x41, 0x7F, 0x00, + 0x04, 0x02, 0x01, 0x02, 0x04, 0x00, + 0x40, 0x40, 0x40, 0x40, 0x40, 0x00, + 0x00, 0x03, 0x07, 0x08, 0x00, 0x00, + 0x20, 0x54, 0x54, 0x78, 0x40, 0x00, + 0x7F, 0x28, 0x44, 0x44, 0x38, 0x00, + 0x38, 0x44, 0x44, 0x44, 0x28, 0x00, + 0x38, 0x44, 0x44, 0x28, 0x7F, 0x00, + 0x38, 0x54, 0x54, 0x54, 0x18, 0x00, + 0x00, 0x08, 0x7E, 0x09, 0x02, 0x00, + 0x18, 0xA4, 0xA4, 0x9C, 0x78, 0x00, + 0x7F, 0x08, 0x04, 0x04, 0x78, 0x00, + 0x00, 0x44, 0x7D, 0x40, 0x00, 0x00, + 0x20, 0x40, 0x40, 0x3D, 0x00, 0x00, + 0x7F, 0x10, 0x28, 0x44, 0x00, 0x00, + 0x00, 0x41, 0x7F, 0x40, 0x00, 0x00, + 0x7C, 0x04, 0x78, 0x04, 0x78, 0x00, + 0x7C, 0x08, 0x04, 0x04, 0x78, 0x00, + 0x38, 0x44, 0x44, 0x44, 0x38, 0x00, + 0xFC, 0x18, 0x24, 0x24, 0x18, 0x00, + 0x18, 0x24, 0x24, 0x18, 0xFC, 0x00, + 0x7C, 0x08, 0x04, 0x04, 0x08, 0x00, + 0x48, 0x54, 0x54, 0x54, 0x24, 0x00, + 0x04, 0x04, 0x3F, 0x44, 0x24, 0x00, + 0x3C, 0x40, 0x40, 0x20, 0x7C, 0x00, + 0x1C, 0x20, 0x40, 0x20, 0x1C, 0x00, + 0x3C, 0x40, 0x30, 0x40, 0x3C, 0x00, + 0x44, 0x28, 0x10, 0x28, 0x44, 0x00, + 0x4C, 0x90, 0x90, 0x90, 0x7C, 0x00, + 0x44, 0x64, 0x54, 0x4C, 0x44, 0x00, + 0x00, 0x08, 0x36, 0x41, 0x00, 0x00, + 0x00, 0x00, 0x77, 0x00, 0x00, 0x00, + 0x00, 0x41, 0x36, 0x08, 0x00, 0x00, + 0x02, 0x01, 0x02, 0x04, 0x02, 0x00, + 0x3C, 0x26, 0x23, 0x26, 0x3C, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x80, 0x00, + 0x00, 0x00, 0x00, 0x80, 0x80, 0x80, + 0x00, 0x00, 0x00, 0x00, 0x80, 0x80, + 0x80, 0x80, 0x80, 0x80, 0x80, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x80, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x80, 0x00, 0x00, 0x0C, 0x90, + 0xB0, 0xE0, 0x72, 0x31, 0x9B, 0xDE, + 0xCE, 0xEC, 0xEE, 0xE9, 0xE9, 0xEC, + 0xCF, 0xDA, 0x99, 0x3E, 0x62, 0xE4, + 0xC4, 0x70, 0x10, 0x10, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x60, + 0xC0, 0xC0, 0x80, 0x80, 0x02, 0x85, + 0x85, 0x87, 0x85, 0x89, 0x89, 0x92, + 0xEA, 0xC6, 0xC4, 0x48, 0x50, 0x60, + 0x40, 0x40, 0x40, 0x40, 0xC0, 0xE0, + 0x50, 0x28, 0x10, 0x10, 0x60, 0xC0, + 0x40, 0x40, 0x40, 0x40, 0x80, 0x80, + 0x80, 0x80, 0x80, 0xE0, 0xF8, 0xFC, + 0xF8, 0xF0, 0x00, 0x00, 0x00, 0x00, + 0xE0, 0xF0, 0xF0, 0xF0, 0xE0, 0xEC, + 0xEE, 0xF7, 0xF3, 0x70, 0x20, 0x00, + 0x7C, 0x7C, 0x7C, 0x7E, 0x00, 0x7E, + 0x7E, 0x7E, 0x7F, 0x7F, 0x7F, 0x00, + 0x00, 0x80, 0xC0, 0xE0, 0x7E, 0x5B, + 0x4F, 0x5B, 0xFE, 0xC0, 0x00, 0x00, + 0xC0, 0x00, 0xDC, 0xD7, 0xDE, 0xDE, + 0xDE, 0xD7, 0xDC, 0x00, 0xC0, 0x00, + 0x00, 0x00, 0x00, 0xE0, 0xEC, 0xDF, + 0xFC, 0xE0, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x7F, 0x80, 0x80, + 0x80, 0x70, 0x0F, 0x00, 0x00, 0x80, + 0x7F, 0x00, 0x00, 0x7F, 0x80, 0x80, + 0x80, 0x80, 0x80, 0x80, 0x80, 0x7F, + 0x00, 0x00, 0x80, 0x80, 0x80, 0x80, + 0x80, 0x80, 0x80, 0xFF, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x40, 0x21, 0x33, 0x3B, 0x7B, + 0xFF, 0x00, 0x7C, 0xFF, 0xFF, 0xFF, + 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, + 0xFF, 0xFF, 0xFF, 0xFF, 0x7C, 0x01, + 0xFF, 0xDE, 0x8C, 0x04, 0x0C, 0x08, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x01, 0x01, 0x01, 0x7F, 0x80, + 0x80, 0xBE, 0xBE, 0x80, 0x80, 0x80, + 0xC1, 0xFF, 0x80, 0x04, 0x32, 0x5E, + 0x1C, 0x3D, 0x26, 0x10, 0xC1, 0xFF, + 0x3E, 0x00, 0x00, 0x08, 0x36, 0xC1, + 0x08, 0x08, 0x14, 0x77, 0x94, 0x94, + 0x94, 0xF7, 0x94, 0xF7, 0x9C, 0x9C, + 0xFF, 0xFF, 0x1E, 0x00, 0x00, 0x00, + 0x0F, 0x1F, 0x3F, 0x7F, 0x7F, 0x7F, + 0x7F, 0x7F, 0x3F, 0x1E, 0x0C, 0x00, + 0x1F, 0x1F, 0x1F, 0x3F, 0x00, 0x3F, + 0x3F, 0x3F, 0x7F, 0x7F, 0x7F, 0x00, + 0x30, 0x7B, 0x7F, 0x78, 0x30, 0x20, + 0x20, 0x30, 0x78, 0x7F, 0x3B, 0x00, + 0x03, 0x00, 0x0F, 0x7F, 0x0F, 0x0F, + 0x0F, 0x7F, 0x0F, 0x00, 0x03, 0x00, + 0x40, 0x7C, 0x3F, 0x3F, 0x23, 0x01, + 0x23, 0x3F, 0x37, 0x6C, 0x40, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x06, 0x02, 0x06, + 0x4D, 0x4F, 0x8C, 0xF9, 0x73, 0x37, + 0x27, 0x2F, 0x2F, 0xAF, 0xEF, 0x6F, + 0x77, 0x17, 0x33, 0x79, 0xCC, 0x1F, + 0x31, 0x20, 0x21, 0x02, 0x02, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x40, 0xE0, + 0xA0, 0xA0, 0xD0, 0x90, 0x48, 0x48, + 0x25, 0x2B, 0x11, 0x09, 0x05, 0x03, + 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, + 0x01, 0x03, 0x02, 0x04, 0x03, 0x01, + 0x01, 0x01, 0x01, 0x01, 0x01, 0x00, + 0x00, 0x00, 0x00, 0x03, 0x0F, 0x1F, + 0x0F, 0x03, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +}; diff --git a/keyboards/zen/config.h b/keyboards/zen/config.h index 4478062eb0e..6868dc13541 100644 --- a/keyboards/zen/config.h +++ b/keyboards/zen/config.h @@ -15,17 +15,6 @@ You should have received a copy of the GNU General Public License along with this program. If not, see . */ -#ifndef CONFIG_H -#define CONFIG_H +#pragma once #include "config_common.h" - -#endif // CONFIG_H - -#undef RGBLED_NUM -#define RGBLIGHT_ANIMATIONS -#define RGBLED_NUM 16 - -#ifndef TAPPING_TERM -#define TAPPING_TERM 100 -#endif diff --git a/keyboards/zen/keymaps/default/rules.mk b/keyboards/zen/keymaps/default/rules.mk deleted file mode 100644 index 73142a16803..00000000000 --- a/keyboards/zen/keymaps/default/rules.mk +++ /dev/null @@ -1,3 +0,0 @@ -RGBLIGHT_ENABLE = yes -BACKLIGHT_ENABLE = yes - diff --git a/keyboards/zen/keymaps/jwlawrence/rules.mk b/keyboards/zen/keymaps/jwlawrence/rules.mk deleted file mode 100644 index 73142a16803..00000000000 --- a/keyboards/zen/keymaps/jwlawrence/rules.mk +++ /dev/null @@ -1,3 +0,0 @@ -RGBLIGHT_ENABLE = yes -BACKLIGHT_ENABLE = yes - diff --git a/keyboards/zen/keymaps/xyverz/rules.mk b/keyboards/zen/keymaps/xyverz/rules.mk deleted file mode 100644 index 73142a16803..00000000000 --- a/keyboards/zen/keymaps/xyverz/rules.mk +++ /dev/null @@ -1,3 +0,0 @@ -RGBLIGHT_ENABLE = yes -BACKLIGHT_ENABLE = yes - diff --git a/keyboards/zen/matrix.c b/keyboards/zen/matrix.c deleted file mode 100644 index 34655237b55..00000000000 --- a/keyboards/zen/matrix.c +++ /dev/null @@ -1,466 +0,0 @@ -/* -Copyright 2017 Danny Nguyen - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see . -*/ - -/* - * scan matrix - */ -#include -#include -#include -#include "wait.h" -#include "print.h" -#include "debug.h" -#include "util.h" -#include "matrix.h" -#include "split_util.h" -#include "pro_micro.h" -#include "config.h" -#include "timer.h" -#include "backlight.h" - -#ifdef USE_I2C -# include "i2c.h" -#else // USE_SERIAL -# include "serial.h" -#endif - -#ifndef DEBOUNCING_DELAY -# define DEBOUNCING_DELAY 5 -#endif - -#if (DEBOUNCING_DELAY > 0) - static uint16_t debouncing_time; - static bool debouncing = false; -#endif - -#if (MATRIX_COLS <= 8) -# define print_matrix_header() print("\nr/c 01234567\n") -# define print_matrix_row(row) print_bin_reverse8(matrix_get_row(row)) -# define matrix_bitpop(i) bitpop(matrix[i]) -# define ROW_SHIFTER ((uint8_t)1) -#else -# error "Currently only supports 8 COLS" -#endif -static matrix_row_t matrix_debouncing[MATRIX_ROWS]; - -#define ERROR_DISCONNECT_COUNT 5 - -#define SERIAL_LED_ADDR 0x00 - -#define ROWS_PER_HAND (MATRIX_ROWS/2) - -static uint8_t error_count = 0; - -static const uint8_t row_pins[MATRIX_ROWS] = MATRIX_ROW_PINS; -static const uint8_t col_pins[MATRIX_COLS] = MATRIX_COL_PINS; - -/* matrix state(1:on, 0:off) */ -static matrix_row_t matrix[MATRIX_ROWS]; -static matrix_row_t matrix_debouncing[MATRIX_ROWS]; - -#if (DIODE_DIRECTION == COL2ROW) - static void init_cols(void); - static bool read_cols_on_row(matrix_row_t current_matrix[], uint8_t current_row); - static void unselect_rows(void); - static void select_row(uint8_t row); - static void unselect_row(uint8_t row); -#elif (DIODE_DIRECTION == ROW2COL) - static void init_rows(void); - static bool read_rows_on_col(matrix_row_t current_matrix[], uint8_t current_col); - static void unselect_cols(void); - static void unselect_col(uint8_t col); - static void select_col(uint8_t col); -#endif - -__attribute__ ((weak)) -void matrix_init_kb(void) { - matrix_init_user(); -} - -__attribute__ ((weak)) -void matrix_scan_kb(void) { - matrix_scan_user(); -} - -__attribute__ ((weak)) -void matrix_init_user(void) { -} - -__attribute__ ((weak)) -void matrix_scan_user(void) { -} - -inline -uint8_t matrix_rows(void) -{ - return MATRIX_ROWS; -} - -inline -uint8_t matrix_cols(void) -{ - return MATRIX_COLS; -} - -void matrix_init(void) -{ - debug_enable = true; - debug_matrix = true; - debug_mouse = true; - // initialize row and col - unselect_rows(); - init_cols(); - - TX_RX_LED_INIT; - - // initialize matrix state: all keys off - for (uint8_t i=0; i < MATRIX_ROWS; i++) { - matrix[i] = 0; - matrix_debouncing[i] = 0; - } - - matrix_init_quantum(); -} - -uint8_t _matrix_scan(void) -{ - int offset = isLeftHand ? 0 : (ROWS_PER_HAND); -#if (DIODE_DIRECTION == COL2ROW) - // Set row, read cols - for (uint8_t current_row = 0; current_row < ROWS_PER_HAND; current_row++) { -# if (DEBOUNCING_DELAY > 0) - bool matrix_changed = read_cols_on_row(matrix_debouncing+offset, current_row); - - if (matrix_changed) { - debouncing = true; - debouncing_time = timer_read(); - } - -# else - read_cols_on_row(matrix+offset, current_row); -# endif - - } - -#elif (DIODE_DIRECTION == ROW2COL) - // Set col, read rows - for (uint8_t current_col = 0; current_col < MATRIX_COLS; current_col++) { -# if (DEBOUNCING_DELAY > 0) - bool matrix_changed = read_rows_on_col(matrix_debouncing+offset, current_col); - if (matrix_changed) { - debouncing = true; - debouncing_time = timer_read(); - } -# else - read_rows_on_col(matrix+offset, current_col); -# endif - - } -#endif - -# if (DEBOUNCING_DELAY > 0) - if (debouncing && (timer_elapsed(debouncing_time) > DEBOUNCING_DELAY)) { - for (uint8_t i = 0; i < ROWS_PER_HAND; i++) { - matrix[i+offset] = matrix_debouncing[i+offset]; - } - debouncing = false; - } -# endif - - return 1; -} - -#ifdef USE_I2C - -// Get rows from other half over i2c -int i2c_transaction(void) { - int slaveOffset = (isLeftHand) ? (ROWS_PER_HAND) : 0; - - int err = i2c_master_start(SLAVE_I2C_ADDRESS + I2C_WRITE); - if (err) goto i2c_error; - - // start of matrix stored at 0x00 - err = i2c_master_write(0x00); - if (err) goto i2c_error; - - // Start read - err = i2c_master_start(SLAVE_I2C_ADDRESS + I2C_READ); - if (err) goto i2c_error; - - if (!err) { - int i; - for (i = 0; i < ROWS_PER_HAND-1; ++i) { - matrix[slaveOffset+i] = i2c_master_read(I2C_ACK); - } - matrix[slaveOffset+i] = i2c_master_read(I2C_NACK); - i2c_master_stop(); - } else { -i2c_error: // the cable is disconnceted, or something else went wrong - i2c_reset_state(); - return err; - } - - return 0; -} - -#else // USE_SERIAL - -int serial_transaction(void) { - int slaveOffset = (isLeftHand) ? (ROWS_PER_HAND) : 0; - - if (serial_update_buffers()) { - return 1; - } - - for (int i = 0; i < ROWS_PER_HAND; ++i) { - matrix[slaveOffset+i] = serial_slave_buffer[i]; - } - -#ifdef BACKLIGHT_ENABLE - // Write backlight level for slave to read - serial_master_buffer[SERIAL_LED_ADDR] = get_backlight_level(); -#endif - return 0; -} -#endif - -uint8_t matrix_scan(void) -{ - uint8_t ret = _matrix_scan(); - -#ifdef USE_I2C - if( i2c_transaction() ) { -#else // USE_SERIAL - if( serial_transaction() ) { -#endif - // turn on the indicator led when halves are disconnected - TXLED1; - - error_count++; - - if (error_count > ERROR_DISCONNECT_COUNT) { - // reset other half if disconnected - int slaveOffset = (isLeftHand) ? (ROWS_PER_HAND) : 0; - for (int i = 0; i < ROWS_PER_HAND; ++i) { - matrix[slaveOffset+i] = 0; - } - } - } else { - // turn off the indicator led on no error - TXLED0; - error_count = 0; - } - matrix_scan_quantum(); - return ret; -} - -void matrix_slave_scan(void) { - _matrix_scan(); - - int offset = (isLeftHand) ? 0 : ROWS_PER_HAND; - -#ifdef USE_I2C - for (int i = 0; i < ROWS_PER_HAND; ++i) { - i2c_slave_buffer[i] = matrix[offset+i]; - } -#else // USE_SERIAL - for (int i = 0; i < ROWS_PER_HAND; ++i) { - serial_slave_buffer[i] = matrix[offset+i]; - } - -#ifdef BACKLIGHT_ENABLE - // Read backlight level sent from master and update level on slave - backlight_set(serial_master_buffer[SERIAL_LED_ADDR]); -#endif -#endif -} - -bool matrix_is_modified(void) -{ - if (debouncing) return false; - return true; -} - -inline -bool matrix_is_on(uint8_t row, uint8_t col) -{ - return (matrix[row] & ((matrix_row_t)1<> 4) + 1) &= ~_BV(pin & 0xF); // IN - _SFR_IO8((pin >> 4) + 2) |= _BV(pin & 0xF); // HI - } -} - -static bool read_cols_on_row(matrix_row_t current_matrix[], uint8_t current_row) -{ - // Store last value of row prior to reading - matrix_row_t last_row_value = current_matrix[current_row]; - - // Clear data in matrix row - current_matrix[current_row] = 0; - - // Select row and wait for row selecton to stabilize - select_row(current_row); - wait_us(30); - - // For each col... - for(uint8_t col_index = 0; col_index < MATRIX_COLS; col_index++) { - - // Select the col pin to read (active low) - uint8_t pin = col_pins[col_index]; - uint8_t pin_state = (_SFR_IO8(pin >> 4) & _BV(pin & 0xF)); - - // Populate the matrix row with the state of the col pin - current_matrix[current_row] |= pin_state ? 0 : (ROW_SHIFTER << col_index); - } - - // Unselect row - unselect_row(current_row); - - return (last_row_value != current_matrix[current_row]); -} - -static void select_row(uint8_t row) -{ - uint8_t pin = row_pins[row]; - _SFR_IO8((pin >> 4) + 1) |= _BV(pin & 0xF); // OUT - _SFR_IO8((pin >> 4) + 2) &= ~_BV(pin & 0xF); // LOW -} - -static void unselect_row(uint8_t row) -{ - uint8_t pin = row_pins[row]; - _SFR_IO8((pin >> 4) + 1) &= ~_BV(pin & 0xF); // IN - _SFR_IO8((pin >> 4) + 2) |= _BV(pin & 0xF); // HI -} - -static void unselect_rows(void) -{ - for(uint8_t x = 0; x < ROWS_PER_HAND; x++) { - uint8_t pin = row_pins[x]; - _SFR_IO8((pin >> 4) + 1) &= ~_BV(pin & 0xF); // IN - _SFR_IO8((pin >> 4) + 2) |= _BV(pin & 0xF); // HI - } -} - -#elif (DIODE_DIRECTION == ROW2COL) - -static void init_rows(void) -{ - for(uint8_t x = 0; x < ROWS_PER_HAND; x++) { - uint8_t pin = row_pins[x]; - _SFR_IO8((pin >> 4) + 1) &= ~_BV(pin & 0xF); // IN - _SFR_IO8((pin >> 4) + 2) |= _BV(pin & 0xF); // HI - } -} - -static bool read_rows_on_col(matrix_row_t current_matrix[], uint8_t current_col) -{ - bool matrix_changed = false; - - // Select col and wait for col selecton to stabilize - select_col(current_col); - wait_us(30); - - // For each row... - for(uint8_t row_index = 0; row_index < ROWS_PER_HAND; row_index++) - { - - // Store last value of row prior to reading - matrix_row_t last_row_value = current_matrix[row_index]; - - // Check row pin state - if ((_SFR_IO8(row_pins[row_index] >> 4) & _BV(row_pins[row_index] & 0xF)) == 0) - { - // Pin LO, set col bit - current_matrix[row_index] |= (ROW_SHIFTER << current_col); - } - else - { - // Pin HI, clear col bit - current_matrix[row_index] &= ~(ROW_SHIFTER << current_col); - } - - // Determine if the matrix changed state - if ((last_row_value != current_matrix[row_index]) && !(matrix_changed)) - { - matrix_changed = true; - } - } - - // Unselect col - unselect_col(current_col); - - return matrix_changed; -} - -static void select_col(uint8_t col) -{ - uint8_t pin = col_pins[col]; - _SFR_IO8((pin >> 4) + 1) |= _BV(pin & 0xF); // OUT - _SFR_IO8((pin >> 4) + 2) &= ~_BV(pin & 0xF); // LOW -} - -static void unselect_col(uint8_t col) -{ - uint8_t pin = col_pins[col]; - _SFR_IO8((pin >> 4) + 1) &= ~_BV(pin & 0xF); // IN - _SFR_IO8((pin >> 4) + 2) |= _BV(pin & 0xF); // HI -} - -static void unselect_cols(void) -{ - for(uint8_t x = 0; x < MATRIX_COLS; x++) { - uint8_t pin = col_pins[x]; - _SFR_IO8((pin >> 4) + 1) &= ~_BV(pin & 0xF); // IN - _SFR_IO8((pin >> 4) + 2) |= _BV(pin & 0xF); // HI - } -} - -#endif diff --git a/keyboards/zen/readme.md b/keyboards/zen/readme.md index 0fb0ffb3b6a..7ca7c69fe54 100644 --- a/keyboards/zen/readme.md +++ b/keyboards/zen/readme.md @@ -2,19 +2,26 @@ A split ergo keyboard with a few goals in mind: -- Be as thin as possible. Other split KBs (Let's Split, Nyquist, Iris) are 15.2mm thick. The Zen is only 8.0mm thick. +- Be as thin as possible. Other split KBs (Let's Split, Nyquist, Iris) are 15.2mm thick. The Zen rev2 is only 13.2mm thick *including switches and caps* when using Kailh Choc low-profile switches, and 22.1mm using standard MX switches and DSA keycaps. - Layout designed for gaming. 1.5u pinky keys, ortho alphas, and angled thumb keys. After trying Ortholinear, Atreus62, and Ergodox, this is the best layout for gaming and typing. -- RGB backlighting. 16 WS2812b LEDs shine through the perimeter switches. The SK6812 variant are cheap and easy to solder. +- Per-key RGB lighting. 34 WS2812b LEDs per side make it exceptionally bright - Price. Using Arduino Pro Micro, SK6812 LEDs, and PCB FR4 for the case, the cost of each half without switches or caps can be reduced to under $20 when purchased at volume. +- Options. The Zen rev2 comes with rotary encoder support, SSD1306 OLED pinout, USB-C or TRRS interconnect, and jumpers to enable compatibility with the [QMK Proton-C](https://olkb.com/parts/qmk-proton-c) and the [Keeb.io Elite-C](https://keeb.io/products/elite-c-usb-c-pro-micro-replacement-arduino-compatible-atmega32u4) -Keyboard Maintainer: [Legonut](https://github.com/Legonut) -Hardware Supported: Zen rev1 +Keyboard Maintainer: [Legonut](https://github.com/Legonut) +Hardware Supported: Zen rev1, Zen rev2 Hardware Availability: [RGBKB.net](https://www.rgbkb.net/) -A build guide and more info for this keyboard can be found here: [Zen Build Guide](https://legonut.gitbooks.io/zen-keyboard/content/). +A build guide and more info for this keyboard can be found here: [Zen Build Guide](https://rgbkb.gitbook.io/sol-build-guide/zygomorph-build-guide/untitled). Make example for this keyboard (after setting up your build environment): - make zen/rev1:default + make zen/rev2:default + +To build for a Proton-C: + + make zen/rev2:default CTPC=yes + +**Note:** The Proton-C does not have split keyboard, or encoder support. Also OLED driver support is untested. Will update as status changes. See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) then the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. diff --git a/keyboards/zen/rev1/config.h b/keyboards/zen/rev1/config.h index f480cadcc51..88f39af4842 100644 --- a/keyboards/zen/rev1/config.h +++ b/keyboards/zen/rev1/config.h @@ -15,15 +15,12 @@ You should have received a copy of the GNU General Public License along with this program. If not, see . */ -#ifndef REV1_CONFIG_H -#define REV1_CONFIG_H - -#include QMK_KEYBOARD_CONFIG_H +#pragma once /* USB Device descriptor parameter */ -#define VENDOR_ID 0xCEEB -#define PRODUCT_ID 0x1256 -#define DEVICE_VER 0x0200 +#define VENDOR_ID 0xFEED +#define PRODUCT_ID 0x3060 +#define DEVICE_VER 0x0001 #define MANUFACTURER Legonut #define PRODUCT Project Zen #define DESCRIPTION Split gaming keyboard @@ -40,12 +37,11 @@ along with this program. If not, see . /* COL2ROW or ROW2COL */ #define DIODE_DIRECTION COL2ROW +#define SOFT_SERIAL_PIN D0 + /* define if matrix has ghost */ //#define MATRIX_HAS_GHOST -/* number of backlight levels */ -// #define BACKLIGHT_LEVELS 3 - /* Set 0 if debouncing isn't needed */ #define DEBOUNCING_DELAY 5 @@ -54,9 +50,6 @@ along with this program. If not, see . /* Locking resynchronize hack */ #define LOCKING_RESYNC_ENABLE -#define BACKLIGHT_PIN F4 -#define BACKLIGHT_LEVELS 5 - /* ws2812 RGB LED */ #define RGB_DI_PIN D1 @@ -79,5 +72,3 @@ along with this program. If not, see . //#define NO_ACTION_ONESHOT //#define NO_ACTION_MACRO //#define NO_ACTION_FUNCTION - -#endif diff --git a/keyboards/zen/keymaps/333fred/config.h b/keyboards/zen/rev1/keymaps/333fred/config.h similarity index 100% rename from keyboards/zen/keymaps/333fred/config.h rename to keyboards/zen/rev1/keymaps/333fred/config.h diff --git a/keyboards/zen/keymaps/333fred/keymap.c b/keyboards/zen/rev1/keymaps/333fred/keymap.c similarity index 100% rename from keyboards/zen/keymaps/333fred/keymap.c rename to keyboards/zen/rev1/keymaps/333fred/keymap.c diff --git a/keyboards/zen/keymaps/333fred/rules.mk b/keyboards/zen/rev1/keymaps/333fred/rules.mk similarity index 85% rename from keyboards/zen/keymaps/333fred/rules.mk rename to keyboards/zen/rev1/keymaps/333fred/rules.mk index 38b71555042..1359e81c09f 100644 --- a/keyboards/zen/keymaps/333fred/rules.mk +++ b/keyboards/zen/rev1/keymaps/333fred/rules.mk @@ -1,5 +1,4 @@ RGBLIGHT_ENABLE = yes -BACKLIGHT_ENABLE = no NKRO_ENABLE = yes KEY_LOCK_ENABLE = yes TAP_DANCE_ENABLE = yes diff --git a/keyboards/zen/keymaps/jwlawrence/config.h b/keyboards/zen/rev1/keymaps/default/config.h similarity index 95% rename from keyboards/zen/keymaps/jwlawrence/config.h rename to keyboards/zen/rev1/keymaps/default/config.h index 38e4d73f0d8..4a549c5b1f7 100644 --- a/keyboards/zen/keymaps/jwlawrence/config.h +++ b/keyboards/zen/rev1/keymaps/default/config.h @@ -15,8 +15,7 @@ You should have received a copy of the GNU General Public License along with this program. If not, see . */ -#ifndef CONFIG_USER_H -#define CONFIG_USER_H +#pragma once #include "config_common.h" @@ -37,5 +36,3 @@ along with this program. If not, see . #define RGBLIGHT_HUE_STEP 8 #define RGBLIGHT_SAT_STEP 8 #define RGBLIGHT_VAL_STEP 8 - -#endif diff --git a/keyboards/zen/keymaps/default/keymap.c b/keyboards/zen/rev1/keymaps/default/keymap.c similarity index 100% rename from keyboards/zen/keymaps/default/keymap.c rename to keyboards/zen/rev1/keymaps/default/keymap.c diff --git a/keyboards/zen/rev1/keymaps/default/rules.mk b/keyboards/zen/rev1/keymaps/default/rules.mk new file mode 100644 index 00000000000..1e3cebb1451 --- /dev/null +++ b/keyboards/zen/rev1/keymaps/default/rules.mk @@ -0,0 +1 @@ +RGBLIGHT_ENABLE = yes diff --git a/keyboards/zen/keymaps/default/config.h b/keyboards/zen/rev1/keymaps/jwlawrence/config.h similarity index 100% rename from keyboards/zen/keymaps/default/config.h rename to keyboards/zen/rev1/keymaps/jwlawrence/config.h diff --git a/keyboards/zen/keymaps/jwlawrence/keymap.c b/keyboards/zen/rev1/keymaps/jwlawrence/keymap.c similarity index 100% rename from keyboards/zen/keymaps/jwlawrence/keymap.c rename to keyboards/zen/rev1/keymaps/jwlawrence/keymap.c diff --git a/keyboards/zen/rev1/keymaps/jwlawrence/rules.mk b/keyboards/zen/rev1/keymaps/jwlawrence/rules.mk new file mode 100644 index 00000000000..1e3cebb1451 --- /dev/null +++ b/keyboards/zen/rev1/keymaps/jwlawrence/rules.mk @@ -0,0 +1 @@ +RGBLIGHT_ENABLE = yes diff --git a/keyboards/zen/keymaps/kageurufu/keymap.c b/keyboards/zen/rev1/keymaps/kageurufu/keymap.c similarity index 98% rename from keyboards/zen/keymaps/kageurufu/keymap.c rename to keyboards/zen/rev1/keymaps/kageurufu/keymap.c index 761100dbe58..75884635cdc 100644 --- a/keyboards/zen/keymaps/kageurufu/keymap.c +++ b/keyboards/zen/rev1/keymaps/kageurufu/keymap.c @@ -1,8 +1,8 @@ #include QMK_KEYBOARD_H #include "kageurufu.h" #ifdef PROTOCOL_LUFA -#include "lufa.h" -#include "split_util.h" + #include "lufa.h" + #include "split_util.h" #endif extern keymap_config_t keymap_config; diff --git a/keyboards/zen/keymaps/xyverz/config.h b/keyboards/zen/rev1/keymaps/xyverz/config.h similarity index 94% rename from keyboards/zen/keymaps/xyverz/config.h rename to keyboards/zen/rev1/keymaps/xyverz/config.h index 818f8998974..d3e21ea1726 100644 --- a/keyboards/zen/keymaps/xyverz/config.h +++ b/keyboards/zen/rev1/keymaps/xyverz/config.h @@ -15,8 +15,7 @@ You should have received a copy of the GNU General Public License along with this program. If not, see . */ -#ifndef CONFIG_USER_H -#define CONFIG_USER_H +#pragma once #include "config_common.h" @@ -31,5 +30,3 @@ along with this program. If not, see . #define RGBLIGHT_HUE_STEP 8 #define RGBLIGHT_SAT_STEP 8 #define RGBLIGHT_VAL_STEP 8 - -#endif diff --git a/keyboards/zen/keymaps/xyverz/keymap.c b/keyboards/zen/rev1/keymaps/xyverz/keymap.c similarity index 100% rename from keyboards/zen/keymaps/xyverz/keymap.c rename to keyboards/zen/rev1/keymaps/xyverz/keymap.c diff --git a/keyboards/zen/rev1/keymaps/xyverz/rules.mk b/keyboards/zen/rev1/keymaps/xyverz/rules.mk new file mode 100644 index 00000000000..1e3cebb1451 --- /dev/null +++ b/keyboards/zen/rev1/keymaps/xyverz/rules.mk @@ -0,0 +1 @@ +RGBLIGHT_ENABLE = yes diff --git a/keyboards/zen/rev1/rev1.h b/keyboards/zen/rev1/rev1.h index c2444f047f6..a12f2ea789a 100644 --- a/keyboards/zen/rev1/rev1.h +++ b/keyboards/zen/rev1/rev1.h @@ -1,5 +1,4 @@ -#ifndef REV1_H -#define REV1_H +#pragma once #include "zen.h" @@ -36,5 +35,3 @@ { k80, k81, k82, k83, k84, k85, KC_NO }, \ { k90, k91, k92, k93, k94, k95, k96 } \ } - -#endif diff --git a/keyboards/zen/rev1/rules.mk b/keyboards/zen/rev1/rules.mk index d7463419b4f..e69de29bb2d 100644 --- a/keyboards/zen/rev1/rules.mk +++ b/keyboards/zen/rev1/rules.mk @@ -1,2 +0,0 @@ -RGBLIGHT_ENABLE = yes -BACKLIGHT_ENABLE = yes diff --git a/keyboards/zen/rev2/config.h b/keyboards/zen/rev2/config.h new file mode 100644 index 00000000000..dc37472f6b9 --- /dev/null +++ b/keyboards/zen/rev2/config.h @@ -0,0 +1,98 @@ +/* +Copyright 2017 Danny Nguyen + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#pragma once + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0xFEED +#define PRODUCT_ID 0x3061 +#define DEVICE_VER 0x0002 +#define MANUFACTURER Legonut +#define PRODUCT "Project Zen" +#define DESCRIPTION "Split gaming keyboard" + +/* key matrix size */ +// Rows are doubled-up + +// wiring of each half +#ifdef CONVERT_TO_PROTON_C + #define MATRIX_ROWS 5 + #define MATRIX_COLS 7 +#else + #define MATRIX_ROWS 10 + #define MATRIX_COLS 7 +#endif + +// Proton-C does pin conversion +#define MATRIX_ROW_PINS { C6, E6, B5, D7, B4 } +#define MATRIX_COL_PINS { F4, F5, F6, F7, B3, B1, B2 } + +#define NUMBER_OF_ENCODERS 1 + +#define ENCODERS_PAD_A { D4 } +#define ENCODERS_PAD_B { D2 } + +#define RGB_DI_PIN B6 +#define SOFT_SERIAL_PIN D3 + +/* COL2ROW or ROW2COL */ +#define DIODE_DIRECTION COL2ROW + +/* define if matrix has ghost */ +//#define MATRIX_HAS_GHOST + +/* Set 0 if debouncing isn't needed */ +#define DEBOUNCING_DELAY 5 + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +#define LOCKING_SUPPORT_ENABLE +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE + +/* ws2812 RGB LED */ +#define RGBLED_NUM 34 // Number of LEDs + +// If using 90 Degree rotation, increase block cout +#ifdef OLED_ROTATE90 + #define OLED_DISPLAY_CUSTOM + #define OLED_DISPLAY_WIDTH 128 + #define OLED_DISPLAY_HEIGHT 32 + #define OLED_MATRIX_SIZE (OLED_DISPLAY_HEIGHT / 8 * OLED_DISPLAY_WIDTH) // 512 (compile time mathed) + #define OLED_BLOCK_TYPE uint16_t // Type to use for segmenting the oled display for smart rendering, use unsigned types only + #define OLED_BLOCK_COUNT (sizeof(OLED_BLOCK_TYPE) * 8) // 8 (compile time mathed) + #define OLED_BLOCK_SIZE (OLED_MATRIX_SIZE / OLED_BLOCK_COUNT) // 32 (compile time mathed) + #define OLED_SOURCE_MAP { 0, 8, 16, 24 } + #define OLED_TARGET_MAP { 24, 16, 8, 0 } +#endif + +/* + * Feature disable options + * These options are also useful to firmware size reduction. + */ + +/* disable debug print */ +// #define NO_DEBUG + +/* disable print */ +// #define NO_PRINT + +/* disable action features */ +//#define NO_ACTION_LAYER +//#define NO_ACTION_TAPPING +//#define NO_ACTION_ONESHOT +//#define NO_ACTION_MACRO +//#define NO_ACTION_FUNCTION diff --git a/keyboards/zen/rev2/keymaps/debug/keymap.c b/keyboards/zen/rev2/keymaps/debug/keymap.c new file mode 100644 index 00000000000..e2d3d6a3567 --- /dev/null +++ b/keyboards/zen/rev2/keymaps/debug/keymap.c @@ -0,0 +1,19 @@ +#include QMK_KEYBOARD_H +#include + +// extern keymap_config_t keymap_config; + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { { { KC_TRNS } } }; + +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + static char buf[10] = " "; + + if (record->event.pressed) { + snprintf(buf, 10, "C%dR%d ", record->event.key.col, record->event.key.row); + + send_string(buf); + } + return false; + + return true; +} diff --git a/keyboards/zen/rev2/keymaps/default/keymap.c b/keyboards/zen/rev2/keymaps/default/keymap.c new file mode 100644 index 00000000000..41003e4a557 --- /dev/null +++ b/keyboards/zen/rev2/keymaps/default/keymap.c @@ -0,0 +1,117 @@ +#include QMK_KEYBOARD_H + +extern keymap_config_t keymap_config; + +// Each layer gets a name for readability, which is then used in the keymap matrix below. +// The underscores don't mean anything - you can have a layer called STUFF or any other name. +// Layer names don't all need to be of the same length, obviously, and you can also skip them +// entirely and just use numbers. +#define _QWERTY 0 +#define _NAV 2 + + +enum custom_keycodes { + QWERTY = SAFE_RANGE, + NAV, + +}; + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + + /* Qwerty + * ,-----------------------------------------. .-----------------------------------------. + * | GESC | 1 | 2 | 3 | 4 | 5 | | 6 | 7 | 8 | 9 | 0 | Bksp | + * |------+------+------+------+------+------| |------+------+------+------+------+------| + * | Tab | Q | W | E | R | T | | Y | U | I | O | P | \ | + * |------+------+------+------+------+------| |------+------+------+------+------+------| + * |CAPS(NAV)|A | S | D | F | G | | H | J | K | L | ; | " | + * |------+------+------+------+------+------+------..------+------+------+------+------+------+------| + * | Shift| Z | X | C | V | B |RGBPrv||RGBNxt| N | M | , | . | / |Enter | + * |------+------+------+------+------+------+------||------+------+------+------+------+------+------| + * | Ctrl | GUI | Alt |RGBTOG| NAV |Space |Delete||Enter |Space | NAV | - | = | PGUP | PGDN | + * `----------------------------------+-------------''------------------------------------------------' + * |Space |Delete||Enter |Space | + * '-------------''-------------' + */ + [_QWERTY] = LAYOUT( \ + KC_GESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_BSPC, \ + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSLS, \ + LT(_NAV, KC_CAPS),KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, \ + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, RGB_RMOD,RGB_MOD, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_ENT, \ + KC_LCTL, KC_LGUI, KC_LALT, RGB_TOG, MO(_NAV), KC_SPC, KC_DEL, KC_ENT, KC_SPACE, MO(_NAV), KC_MINS, KC_EQL, KC_PGUP, KC_PGDN, \ + KC_SPC, KC_DEL, KC_ENT, KC_SPACE \ + ), + + /* NAV + * ,-----------------------------------------. .-----------------------------------------. + * | GESC | 1 | 2 | 3 | 4 | 5 | | 6 | 7 | 8 | 9 | 0 | Bksp | + * |------+------+------+------+------+------| |------+------+------+------+------+------| + * | Tab | Q | W | E | R | T | | Y | U | I | O | P | \ | + * |------+------+------+------+------+------| |------+------+------+------+------+------| + * |CAPS(NAV)|A | S | D | F | G | | H | J | K | L | ; | " | + * |------+------+------+------+------+------+------..------+------+------+------+------+------+------| + * | Shift| Z | X | C | V | B | || | N | M | , | . | / |Enter | + * |------+------+------+------+------+------+------||------+------+------+------+------+------+------| + * | Ctrl | GUI | Alt |RGBTOG| NAV |Space |Delete||Enter |Space | NAV | - | = | PGUP | PGDN | + * `----------------------------------+-------------''------------------------------------------------' + * |Space |Delete||Enter |Space | + * '-------------''-------------' + */ + [_NAV] = LAYOUT( \ + KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, \ + _______, RGB_SAI, RGB_VAI, RGB_SAD, RESET, KC_LBRC, KC_RBRC, KC_PGUP, KC_UP, KC_PGDN, KC_INS, KC_HOME, \ + _______, RGB_HUD, RGB_VAD, RGB_HUI, _______, _______, _______, KC_LEFT, KC_DOWN, KC_RGHT, KC_DEL, KC_END, \ + KC_LSFT, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_MPLY, KC_MPRV, KC_MNXT, \ + KC_LCTL, KC_LGUI, KC_LALT, RGB_MOD, _______, _______, _______, _______, _______, _______, _______, KC_MUTE, KC_VOLU, KC_VOLD, \ + _______, _______, _______, _______ + ), + +}; + +void encoder_update_user(uint8_t index, bool clockwise) { + if (index == 0) { /* First encoder */ + if (clockwise) { + tap_code(KC_PGDN); + } else { + tap_code(KC_PGUP); + } + } else if (index == 1) { /* Second encoder from slave */ + if (clockwise) { + tap_code(KC_UP); + } else { + tap_code(KC_DOWN); + } + } +} + +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + switch (keycode) { + case QWERTY: + if (record->event.pressed) { + set_single_persistent_default_layer(1UL<<_QWERTY); + } + return false; + break; + //case COLEMAK: + //if (record->event.pressed) { + //set_single_persistent_default_layer(1UL<<_COLEMAK); + //} + //return false; + //break; + } + return true; +} + + +#if OLED_DRIVER_ENABLE +const char* layer_name_user(uint32_t layer) { + switch (layer) { + case _QWERTY: + return PSTR("QWRTY"); + case _NAV: + return PSTR("NAV\n"); + default: + return PSTR("UNDEF"); + } +} +#endif diff --git a/keyboards/zen/rev2/rev2.c b/keyboards/zen/rev2/rev2.c new file mode 100644 index 00000000000..4104460db1a --- /dev/null +++ b/keyboards/zen/rev2/rev2.c @@ -0,0 +1,66 @@ +#include "rev2.h" + +#ifdef OLED_DRIVER_ENABLE +#include "split_util.h" +#include "oled_driver.h" + +__attribute__((weak)) +void render_logo(void) { + static const char PROGMEM sol_logo[] = { + 0x80,0x81,0x82,0x83,0x84,0x85,0x86,0x87,0x88,0x89,0x8a,0x8b,0x8c,0x8d,0x8e,0x8f,0x90,0x91,0x92,0x93,0x94, + 0xa0,0xa1,0xa2,0xa3,0xa4,0xa5,0xa6,0xa7,0xa8,0xa9,0xaa,0xab,0xac,0xad,0xae,0xaf,0xb0,0xb1,0xb2,0xb3,0xb4, + 0xc0,0xc1,0xc2,0xc3,0xc4,0xc5,0xc6,0xc7,0xc8,0xc9,0xca,0xcb,0xcc,0xcd,0xce,0xcf,0xd0,0xd1,0xd2,0xd3,0xd4,0}; + + oled_write_P(sol_logo, false); +} + +__attribute__((weak)) +const char* layer_name_user(uint32_t layer) { + switch (layer) { + default: + return PSTR("UNDEF\n"); + } +} + +__attribute__((weak)) +void render_status(void) { + // Setup for 90 degree rendering because it's awesome! + // It can house 16 lines of text, with 5 letters each line + // Render to mode icon + static const char PROGMEM mode_logo[2][4] = { + {0x97,0x98,0x0a,0}, + {0xb7,0xb8,0x0a,0} }; + + oled_write_P(mode_logo[0], false); // Line 1 + oled_write_P(mode_logo[1], false); // Line 2 + + // Define layers here, Have not worked out how to have text displayed for each layer. Copy down the number you see and add a case for it below + oled_set_cursor(0, 3); // Line 3 + oled_write_P(PSTR("Layer"), false); // Line 4 + oled_write_P(layer_name_user(biton32(layer_state)), false); + + // Host Keyboard LED Status + uint8_t led_usb_state = host_keyboard_leds(); + oled_set_cursor(0, OLED_MAX_LINES - 4); // Line 13 + oled_write_P(led_usb_state & (1< +#ifdef __AVR__ + #include + #include +#endif +#endif + +//void promicro_bootloader_jmp(bool program); + +#ifdef CONVERT_TO_PROTON_C + #define LAYOUT( \ + k00, k01, k02, k03, k04, k05, k55, k54, k53, k52, k51, k50, \ + k10, k11, k12, k13, k14, k15, k65, k64, k63, k62, k61, k60, \ + k20, k21, k22, k23, k24, k25, k75, k74, k73, k72, k71, k70, \ + k30, k31, k32, k33, k34, k35, k16, k66, k85, k84, k83, k82, k81, k80, \ + k40, k41, k42, k43, k44, k36, k26, k76, k86, k94, k93, k92, k91, k90, \ + k45, k46, k96, k95 \ + ) \ + { \ + { k00, k01, k02, k03, k04, k05, KC_NO }, \ + { k10, k11, k12, k13, k14, k15, k16 }, \ + { k20, k21, k22, k23, k24, k25, k26 }, \ + { k30, k31, k32, k33, k34, k35, k36 }, \ + { k40, k41, k42, k43, k44, k45, k46 } \ + } +#else + #define LAYOUT( \ + k00, k01, k02, k03, k04, k05, k55, k54, k53, k52, k51, k50, \ + k10, k11, k12, k13, k14, k15, k65, k64, k63, k62, k61, k60, \ + k20, k21, k22, k23, k24, k25, k75, k74, k73, k72, k71, k70, \ + k30, k31, k32, k33, k34, k35, k16, k66, k85, k84, k83, k82, k81, k80, \ + k40, k41, k42, k43, k44, k36, k26, k76, k86, k94, k93, k92, k91, k90, \ + k45, k46, k96, k95 \ + ) \ + { \ + { k00, k01, k02, k03, k04, k05, KC_NO }, \ + { k10, k11, k12, k13, k14, k15, k16 }, \ + { k20, k21, k22, k23, k24, k25, k26 }, \ + { k30, k31, k32, k33, k34, k35, k36 }, \ + { k40, k41, k42, k43, k44, k45, k46 }, \ + { k50, k51, k52, k53, k54, k55, KC_NO }, \ + { k60, k61, k62, k63, k64, k65, k66 }, \ + { k70, k71, k72, k73, k74, k75, k76 }, \ + { k80, k81, k82, k83, k84, k85, k86 }, \ + { k90, k91, k92, k93, k94, k95, k96 } \ + } +#endif diff --git a/keyboards/zen/rev2/rules.mk b/keyboards/zen/rev2/rules.mk new file mode 100644 index 00000000000..d1fe410525f --- /dev/null +++ b/keyboards/zen/rev2/rules.mk @@ -0,0 +1,14 @@ +ENCODER_ENABLE = yes + +OLED_DRIVER_ENABLE = no +OLED_ROTATE90 = yes + +# Setup so that OLED and 90 degree rotation can be turned on/off easily +# with "OLED_DRIVER_ENABLE = yes" or "OLED_ROTATE90 = no" in user's rules.mk file +ifeq ($(strip $(OLED_DRIVER_ENABLE)), yes) + # Custom local font file + OPT_DEFS += -DOLED_FONT_H=\"common/glcdfont.c\" + ifeq ($(strip $(OLED_DRIVER_ENABLE)), yes) + OPT_DEFS += -DOLED_ROTATE90 + endif +endif diff --git a/keyboards/zen/rules.mk b/keyboards/zen/rules.mk index 4e82689111d..f5d64a7f03b 100644 --- a/keyboards/zen/rules.mk +++ b/keyboards/zen/rules.mk @@ -1,52 +1,27 @@ -SRC += matrix.c \ - split_util.c \ - serial.c - -# MCU name -#MCU = at90usb1287 +# Pro Micro or Elite-C +# Automagically converted to Proton-C MCU = atmega32u4 - -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. F_CPU = 16000000 - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. F_USB = $(F_CPU) - -# Bootloader -# This definition is optional, and if your keyboard supports multiple bootloaders of -# different sizes, comment this out, and the correct address will be loaded -# automatically (+60). See bootloader.mk for all options. -BOOTLOADER = caterina - -# Interrupt driven control endpoint task(+60) +BOOTLOADER = dfu OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT +ifeq ($(strip $(CTPC)), yes) + CONVERT_TO_PROTON_C=yes +endif + +ifeq ($(strip $(CONVERT_TO_PROTON_C)), yes) + SPLIT_KEYBOARD = no # currently unsupported on ARM + RGBLIGHT_ENABLE = no # currently unsupported on ARM + + EXTRAFLAGS += -DUSE_PROTON_C +else + # Currently moved to Pro Micro only section because of lack of Proton-C support + SPLIT_KEYBOARD = yes + RGBLIGHT_ENABLE = yes # Enable WS2812 RGB underlight. +endif + # Build Options # change to "no" to disable the options, or define them in the Makefile in # the appropriate keymap folder that will get included automatically @@ -57,17 +32,11 @@ EXTRAKEY_ENABLE = yes # Audio control and System control(+450) CONSOLE_ENABLE = no # Console for debug(+400) COMMAND_ENABLE = yes # Commands for debug and configuration NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work -BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality MIDI_ENABLE = no # MIDI controls AUDIO_ENABLE = no # Audio output on port C6 UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID -RGBLIGHT_ENABLE = yes # Enable WS2812 RGB underlight. -SUBPROJECT_rev1 = yes -USE_I2C = no -# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE + SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend -CUSTOM_MATRIX = yes - -DEFAULT_FOLDER = zen/rev1 +DEFAULT_FOLDER = zen/rev2 diff --git a/keyboards/zen/serial.c b/keyboards/zen/serial.c deleted file mode 100644 index 74bcbb6bf6e..00000000000 --- a/keyboards/zen/serial.c +++ /dev/null @@ -1,228 +0,0 @@ -/* - * WARNING: be careful changing this code, it is very timing dependent - */ - -#ifndef F_CPU -#define F_CPU 16000000 -#endif - -#include -#include -#include -#include -#include "serial.h" - -#ifndef USE_I2C - -// Serial pulse period in microseconds. Its probably a bad idea to lower this -// value. -#define SERIAL_DELAY 24 - -uint8_t volatile serial_slave_buffer[SERIAL_SLAVE_BUFFER_LENGTH] = {0}; -uint8_t volatile serial_master_buffer[SERIAL_MASTER_BUFFER_LENGTH] = {0}; - -#define SLAVE_DATA_CORRUPT (1<<0) -volatile uint8_t status = 0; - -inline static -void serial_delay(void) { - _delay_us(SERIAL_DELAY); -} - -inline static -void serial_output(void) { - SERIAL_PIN_DDR |= SERIAL_PIN_MASK; -} - -// make the serial pin an input with pull-up resistor -inline static -void serial_input(void) { - SERIAL_PIN_DDR &= ~SERIAL_PIN_MASK; - SERIAL_PIN_PORT |= SERIAL_PIN_MASK; -} - -inline static -uint8_t serial_read_pin(void) { - return !!(SERIAL_PIN_INPUT & SERIAL_PIN_MASK); -} - -inline static -void serial_low(void) { - SERIAL_PIN_PORT &= ~SERIAL_PIN_MASK; -} - -inline static -void serial_high(void) { - SERIAL_PIN_PORT |= SERIAL_PIN_MASK; -} - -void serial_master_init(void) { - serial_output(); - serial_high(); -} - -void serial_slave_init(void) { - serial_input(); - - // Enable INT0 - EIMSK |= _BV(INT0); - // Trigger on falling edge of INT0 - EICRA &= ~(_BV(ISC00) | _BV(ISC01)); -} - -// Used by the master to synchronize timing with the slave. -static -void sync_recv(void) { - serial_input(); - // This shouldn't hang if the slave disconnects because the - // serial line will float to high if the slave does disconnect. - while (!serial_read_pin()); - serial_delay(); -} - -// Used by the slave to send a synchronization signal to the master. -static -void sync_send(void) { - serial_output(); - - serial_low(); - serial_delay(); - - serial_high(); -} - -// Reads a byte from the serial line -static -uint8_t serial_read_byte(void) { - uint8_t byte = 0; - serial_input(); - for ( uint8_t i = 0; i < 8; ++i) { - byte = (byte << 1) | serial_read_pin(); - serial_delay(); - _delay_us(1); - } - - return byte; -} - -// Sends a byte with MSB ordering -static -void serial_write_byte(uint8_t data) { - uint8_t b = 8; - serial_output(); - while( b-- ) { - if(data & (1 << b)) { - serial_high(); - } else { - serial_low(); - } - serial_delay(); - } -} - -// interrupt handle to be used by the slave device -ISR(SERIAL_PIN_INTERRUPT) { - sync_send(); - - uint8_t checksum = 0; - for (int i = 0; i < SERIAL_SLAVE_BUFFER_LENGTH; ++i) { - serial_write_byte(serial_slave_buffer[i]); - sync_send(); - checksum += serial_slave_buffer[i]; - } - serial_write_byte(checksum); - sync_send(); - - // wait for the sync to finish sending - serial_delay(); - - // read the middle of pulses - _delay_us(SERIAL_DELAY/2); - - uint8_t checksum_computed = 0; - for (int i = 0; i < SERIAL_MASTER_BUFFER_LENGTH; ++i) { - serial_master_buffer[i] = serial_read_byte(); - sync_send(); - checksum_computed += serial_master_buffer[i]; - } - uint8_t checksum_received = serial_read_byte(); - sync_send(); - - serial_input(); // end transaction - - if ( checksum_computed != checksum_received ) { - status |= SLAVE_DATA_CORRUPT; - } else { - status &= ~SLAVE_DATA_CORRUPT; - } -} - -inline -bool serial_slave_DATA_CORRUPT(void) { - return status & SLAVE_DATA_CORRUPT; -} - -// Copies the serial_slave_buffer to the master and sends the -// serial_master_buffer to the slave. -// -// Returns: -// 0 => no error -// 1 => slave did not respond -int serial_update_buffers(void) { - // this code is very time dependent, so we need to disable interrupts - cli(); - - // signal to the slave that we want to start a transaction - serial_output(); - serial_low(); - _delay_us(1); - - // wait for the slaves response - serial_input(); - serial_high(); - _delay_us(SERIAL_DELAY); - - // check if the slave is present - if (serial_read_pin()) { - // slave failed to pull the line low, assume not present - sei(); - return 1; - } - - // if the slave is present syncronize with it - sync_recv(); - - uint8_t checksum_computed = 0; - // receive data from the slave - for (int i = 0; i < SERIAL_SLAVE_BUFFER_LENGTH; ++i) { - serial_slave_buffer[i] = serial_read_byte(); - sync_recv(); - checksum_computed += serial_slave_buffer[i]; - } - uint8_t checksum_received = serial_read_byte(); - sync_recv(); - - if (checksum_computed != checksum_received) { - sei(); - return 1; - } - - uint8_t checksum = 0; - // send data to the slave - for (int i = 0; i < SERIAL_MASTER_BUFFER_LENGTH; ++i) { - serial_write_byte(serial_master_buffer[i]); - sync_recv(); - checksum += serial_master_buffer[i]; - } - serial_write_byte(checksum); - sync_recv(); - - // always, release the line when not in use - serial_output(); - serial_high(); - - sei(); - return 0; -} - -#endif diff --git a/keyboards/zen/serial.h b/keyboards/zen/serial.h deleted file mode 100644 index 15fe4db7b4c..00000000000 --- a/keyboards/zen/serial.h +++ /dev/null @@ -1,26 +0,0 @@ -#ifndef MY_SERIAL_H -#define MY_SERIAL_H - -#include "config.h" -#include - -/* TODO: some defines for interrupt setup */ -#define SERIAL_PIN_DDR DDRD -#define SERIAL_PIN_PORT PORTD -#define SERIAL_PIN_INPUT PIND -#define SERIAL_PIN_MASK _BV(PD0) -#define SERIAL_PIN_INTERRUPT INT0_vect - -#define SERIAL_SLAVE_BUFFER_LENGTH MATRIX_ROWS/2 -#define SERIAL_MASTER_BUFFER_LENGTH 1 - -// Buffers for master - slave communication -extern volatile uint8_t serial_slave_buffer[SERIAL_SLAVE_BUFFER_LENGTH]; -extern volatile uint8_t serial_master_buffer[SERIAL_MASTER_BUFFER_LENGTH]; - -void serial_master_init(void); -void serial_slave_init(void); -int serial_update_buffers(void); -bool serial_slave_data_corrupt(void); - -#endif diff --git a/keyboards/zen/split_rgb.c b/keyboards/zen/split_rgb.c deleted file mode 100644 index 6d7cb44cf0d..00000000000 --- a/keyboards/zen/split_rgb.c +++ /dev/null @@ -1,41 +0,0 @@ -#include -#include -#include "split_util.h" -#include "progmem.h" -#include "print.h" -#include "rgblight.h" - -#ifdef USE_I2C -# include "i2c.h" -#else // USE_SERIAL -# include "serial.h" -#endif - - -rgblight_config_t rgblight_config; - -void rgblight_slave_update(void) { - //rgblight_effect_christmas(); -} - - -void rgblight_set(void) { - if (rgblight_config.enable) { - #ifdef RGBW - ws2812_setleds_rgbw(led, RGBLED_NUM); - #else - ws2812_setleds(led, RGBLED_NUM); - #endif - } else { - for (uint8_t i = 0; i < RGBLED_NUM; i++) { - led[i].r = 0; - led[i].g = 0; - led[i].b = 0; - } - #ifdef RGBW - ws2812_setleds_rgbw(led, RGBLED_NUM); - #else - ws2812_setleds(led, RGBLED_NUM); - #endif - } -} diff --git a/keyboards/zen/split_rgb.h b/keyboards/zen/split_rgb.h deleted file mode 100644 index 5f552890afd..00000000000 --- a/keyboards/zen/split_rgb.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef SPLIT_RGB_H -#define SPLIT_RGB_H - -void rgblight_slave_update(void); - -#endif diff --git a/keyboards/zen/split_util.c b/keyboards/zen/split_util.c deleted file mode 100644 index 346cbc90894..00000000000 --- a/keyboards/zen/split_util.c +++ /dev/null @@ -1,86 +0,0 @@ -#include -#include -#include -#include -#include -#include -#include "split_util.h" -#include "matrix.h" -#include "keyboard.h" -#include "config.h" -#include "timer.h" - -#ifdef USE_I2C -# include "i2c.h" -#else -# include "serial.h" -#endif - -volatile bool isLeftHand = true; - -static void setup_handedness(void) { - #ifdef EE_HANDS - isLeftHand = eeprom_read_byte(EECONFIG_HANDEDNESS); - #else - // I2C_MASTER_RIGHT is deprecated, use MASTER_RIGHT instead, since this works for both serial and i2c - #if defined(I2C_MASTER_RIGHT) || defined(MASTER_RIGHT) - isLeftHand = !has_usb(); - #else - isLeftHand = has_usb(); - #endif - #endif -} - -static void keyboard_master_setup(void) { -#ifdef USE_I2C - i2c_master_init(); -#ifdef SSD1306OLED - matrix_master_OLED_init (); -#endif -#else - serial_master_init(); -#endif -} - -static void keyboard_slave_setup(void) { - timer_init(); -#ifdef USE_I2C - i2c_slave_init(SLAVE_I2C_ADDRESS); -#else - serial_slave_init(); -#endif -} - -bool has_usb(void) { - USBCON |= (1 << OTGPADE); //enables VBUS pad - _delay_us(5); - return (USBSTA & (1< -#include "eeconfig.h" - -#define SLAVE_I2C_ADDRESS 0x32 - -extern volatile bool isLeftHand; - -// slave version of matix scan, defined in matrix.c -void matrix_slave_scan(void); - -void split_keyboard_setup(void); -bool has_usb(void); -void keyboard_slave_loop(void); - -void matrix_master_OLED_init (void); - -#endif diff --git a/keyboards/zen/zen.h b/keyboards/zen/zen.h index 56fc64fe26b..cee7652d628 100644 --- a/keyboards/zen/zen.h +++ b/keyboards/zen/zen.h @@ -1,7 +1,8 @@ -#ifndef ZEN_H -#define ZEN_H - -#include "rev1.h" -#include "quantum.h" +#pragma once +#if KEYBOARD_zen_rev1 + #include "rev1.h" +#elif KEYBOARD_zen_rev2 + #include "rev2.h" #endif +#include "quantum.h" From d0fb7005d51be7c876e63e87778d080c8a733a13 Mon Sep 17 00:00:00 2001 From: Alex Ong Date: Tue, 16 Apr 2019 05:58:03 +1000 Subject: [PATCH 113/171] Eager pk/pr optimization (#5621) * Optimizations to eager_pk * eager_pr also uses changed boolean now. --- quantum/debounce/eager_pk.c | 89 ++++++++++++++++--------------------- quantum/debounce/eager_pr.c | 74 ++++++++++++++---------------- 2 files changed, 72 insertions(+), 91 deletions(-) diff --git a/quantum/debounce/eager_pk.c b/quantum/debounce/eager_pk.c index b8ad09cee30..aa0f63a9d4e 100644 --- a/quantum/debounce/eager_pk.c +++ b/quantum/debounce/eager_pk.c @@ -24,23 +24,21 @@ No further inputs are accepted until DEBOUNCE milliseconds have occurred. #include #ifndef DEBOUNCE - #define DEBOUNCE 5 +# define DEBOUNCE 5 #endif - #if (MATRIX_COLS <= 8) -# define ROW_SHIFTER ((uint8_t)1) +# define ROW_SHIFTER ((uint8_t)1) #elif (MATRIX_COLS <= 16) -# define ROW_SHIFTER ((uint16_t)1) +# define ROW_SHIFTER ((uint16_t)1) #elif (MATRIX_COLS <= 32) -# define ROW_SHIFTER ((uint32_t)1) +# define ROW_SHIFTER ((uint32_t)1) #endif - - #define debounce_counter_t uint8_t static debounce_counter_t *debounce_counters; +static bool counters_need_update; #define DEBOUNCE_ELAPSED 251 #define MAX_DEBOUNCE (DEBOUNCE_ELAPSED - 1) @@ -48,39 +46,39 @@ static debounce_counter_t *debounce_counters; void update_debounce_counters(uint8_t num_rows, uint8_t current_time); void transfer_matrix_values(matrix_row_t raw[], matrix_row_t cooked[], uint8_t num_rows, uint8_t current_time); -//we use num_rows rather than MATRIX_ROWS to support split keyboards -void debounce_init(uint8_t num_rows) -{ - debounce_counters = (debounce_counter_t*)malloc(num_rows*MATRIX_COLS * sizeof(debounce_counter_t)); - int i = 0; - for (uint8_t r = 0; r < num_rows; r++) - { - for (uint8_t c = 0; c < MATRIX_COLS; c++) - { +// we use num_rows rather than MATRIX_ROWS to support split keyboards +void debounce_init(uint8_t num_rows) { + debounce_counters = (debounce_counter_t *)malloc(num_rows * MATRIX_COLS * sizeof(debounce_counter_t)); + int i = 0; + for (uint8_t r = 0; r < num_rows; r++) { + for (uint8_t c = 0; c < MATRIX_COLS; c++) { debounce_counters[i++] = DEBOUNCE_ELAPSED; } } } -void debounce(matrix_row_t raw[], matrix_row_t cooked[], uint8_t num_rows, bool changed) -{ +void debounce(matrix_row_t raw[], matrix_row_t cooked[], uint8_t num_rows, bool changed) { uint8_t current_time = timer_read() % MAX_DEBOUNCE; - update_debounce_counters(num_rows, current_time); - transfer_matrix_values(raw, cooked, num_rows, current_time); + if (counters_need_update) { + update_debounce_counters(num_rows, current_time); + } + + if (changed) { + transfer_matrix_values(raw, cooked, num_rows, current_time); + } } -//If the current time is > debounce counter, set the counter to enable input. -void update_debounce_counters(uint8_t num_rows, uint8_t current_time) -{ +// If the current time is > debounce counter, set the counter to enable input. +void update_debounce_counters(uint8_t num_rows, uint8_t current_time) { + counters_need_update = false; debounce_counter_t *debounce_pointer = debounce_counters; - for (uint8_t row = 0; row < num_rows; row++) - { - for (uint8_t col = 0; col < MATRIX_COLS; col++) - { - if (*debounce_pointer != DEBOUNCE_ELAPSED) - { + for (uint8_t row = 0; row < num_rows; row++) { + for (uint8_t col = 0; col < MATRIX_COLS; col++) { + if (*debounce_pointer != DEBOUNCE_ELAPSED) { if (TIMER_DIFF(current_time, *debounce_pointer, MAX_DEBOUNCE) >= DEBOUNCE) { *debounce_pointer = DEBOUNCE_ELAPSED; + } else { + counters_need_update = true; } } debounce_pointer++; @@ -89,33 +87,22 @@ void update_debounce_counters(uint8_t num_rows, uint8_t current_time) } // upload from raw_matrix to final matrix; -void transfer_matrix_values(matrix_row_t raw[], matrix_row_t cooked[], uint8_t num_rows, uint8_t current_time) -{ +void transfer_matrix_values(matrix_row_t raw[], matrix_row_t cooked[], uint8_t num_rows, uint8_t current_time) { debounce_counter_t *debounce_pointer = debounce_counters; - for (uint8_t row = 0; row < num_rows; row++) - { - matrix_row_t existing_row = cooked[row]; - matrix_row_t raw_row = raw[row]; - - for (uint8_t col = 0; col < MATRIX_COLS; col++) - { + for (uint8_t row = 0; row < num_rows; row++) { + matrix_row_t delta = raw[row] ^ cooked[row]; + matrix_row_t existing_row = cooked[row]; + for (uint8_t col = 0; col < MATRIX_COLS; col++) { matrix_row_t col_mask = (ROW_SHIFTER << col); - bool final_value = raw_row & col_mask; - bool existing_value = existing_row & col_mask; - if (*debounce_pointer == DEBOUNCE_ELAPSED && - (existing_value != final_value)) - { - *debounce_pointer = current_time; - existing_row ^= col_mask; //flip the bit. + if ((delta & col_mask) && *debounce_pointer == DEBOUNCE_ELAPSED) { + *debounce_pointer = current_time; + counters_need_update = true; + existing_row ^= col_mask; // flip the bit. } debounce_pointer++; } cooked[row] = existing_row; - } -} - -bool debounce_active(void) -{ - return true; + } } +bool debounce_active(void) { return true; } diff --git a/quantum/debounce/eager_pr.c b/quantum/debounce/eager_pr.c index 9eb9480a798..5b460f6630a 100644 --- a/quantum/debounce/eager_pr.c +++ b/quantum/debounce/eager_pr.c @@ -24,13 +24,13 @@ No further inputs are accepted until DEBOUNCE milliseconds have occurred. #include #ifndef DEBOUNCE - #define DEBOUNCE 5 +# define DEBOUNCE 5 #endif - #define debounce_counter_t uint8_t static debounce_counter_t *debounce_counters; +static bool counters_need_update; #define DEBOUNCE_ELAPSED 251 #define MAX_DEBOUNCE (DEBOUNCE_ELAPSED - 1) @@ -38,33 +38,35 @@ static debounce_counter_t *debounce_counters; void update_debounce_counters(uint8_t num_rows, uint8_t current_time); void transfer_matrix_values(matrix_row_t raw[], matrix_row_t cooked[], uint8_t num_rows, uint8_t current_time); -//we use num_rows rather than MATRIX_ROWS to support split keyboards -void debounce_init(uint8_t num_rows) -{ - debounce_counters = (debounce_counter_t*)malloc(num_rows*sizeof(debounce_counter_t)); - for (uint8_t r = 0; r < num_rows; r++) - { +// we use num_rows rather than MATRIX_ROWS to support split keyboards +void debounce_init(uint8_t num_rows) { + debounce_counters = (debounce_counter_t *)malloc(num_rows * sizeof(debounce_counter_t)); + for (uint8_t r = 0; r < num_rows; r++) { debounce_counters[r] = DEBOUNCE_ELAPSED; } } -void debounce(matrix_row_t raw[], matrix_row_t cooked[], uint8_t num_rows, bool changed) -{ +void debounce(matrix_row_t raw[], matrix_row_t cooked[], uint8_t num_rows, bool changed) { uint8_t current_time = timer_read() % MAX_DEBOUNCE; - update_debounce_counters(num_rows, current_time); - transfer_matrix_values(raw, cooked, num_rows, current_time); + if (counters_need_update) { + update_debounce_counters(num_rows, current_time); + } + + if (changed) { + transfer_matrix_values(raw, cooked, num_rows, current_time); + } } -//If the current time is > debounce counter, set the counter to enable input. -void update_debounce_counters(uint8_t num_rows, uint8_t current_time) -{ +// If the current time is > debounce counter, set the counter to enable input. +void update_debounce_counters(uint8_t num_rows, uint8_t current_time) { + counters_need_update = false; debounce_counter_t *debounce_pointer = debounce_counters; - for (uint8_t row = 0; row < num_rows; row++) - { - if (*debounce_pointer != DEBOUNCE_ELAPSED) - { + for (uint8_t row = 0; row < num_rows; row++) { + if (*debounce_pointer != DEBOUNCE_ELAPSED) { if (TIMER_DIFF(current_time, *debounce_pointer, MAX_DEBOUNCE) >= DEBOUNCE) { *debounce_pointer = DEBOUNCE_ELAPSED; + } else { + counters_need_update = true; } } debounce_pointer++; @@ -72,29 +74,21 @@ void update_debounce_counters(uint8_t num_rows, uint8_t current_time) } // upload from raw_matrix to final matrix; -void transfer_matrix_values(matrix_row_t raw[], matrix_row_t cooked[], uint8_t num_rows, uint8_t current_time) -{ +void transfer_matrix_values(matrix_row_t raw[], matrix_row_t cooked[], uint8_t num_rows, uint8_t current_time) { debounce_counter_t *debounce_pointer = debounce_counters; - for (uint8_t row = 0; row < num_rows; row++) - { - matrix_row_t existing_row = cooked[row]; - matrix_row_t raw_row = raw[row]; - - //determine new value basd on debounce pointer + raw value - if (*debounce_pointer == DEBOUNCE_ELAPSED && - (existing_row != raw_row)) - { - *debounce_pointer = current_time; - existing_row = raw_row; + for (uint8_t row = 0; row < num_rows; row++) { + matrix_row_t existing_row = cooked[row]; + matrix_row_t raw_row = raw[row]; + + // determine new value basd on debounce pointer + raw value + if (*debounce_pointer == DEBOUNCE_ELAPSED && (existing_row != raw_row)) { + *debounce_pointer = current_time; + cooked[row] = raw_row; + counters_need_update = true; } - cooked[row] = existing_row; - + debounce_pointer++; - } -} - -bool debounce_active(void) -{ - return true; + } } +bool debounce_active(void) { return true; } From 838d09b0a9c78e7e57c9d01132154e78ebaaf560 Mon Sep 17 00:00:00 2001 From: Iason Dimitrakopoulos Date: Tue, 16 Apr 2019 20:28:29 +0300 Subject: [PATCH 114/171] [Keymap] Bugfixes on tapdance logic and small changes in layout (#5622) * Add layer switcher functionality * Fixes in left/right bracket functions and other small fixes * used better KCs --- keyboards/jj50/keymaps/archetype/config.h | 1 + keyboards/jj50/keymaps/archetype/keymap.c | 138 ++++++++++++++++------ 2 files changed, 101 insertions(+), 38 deletions(-) diff --git a/keyboards/jj50/keymaps/archetype/config.h b/keyboards/jj50/keymaps/archetype/config.h index 7955796eaf6..a12e070b4fa 100644 --- a/keyboards/jj50/keymaps/archetype/config.h +++ b/keyboards/jj50/keymaps/archetype/config.h @@ -4,5 +4,6 @@ #undef TAPPING_TERM #define AUTO_SHIFT_TIMEOUT 150 +#define NO_AUTO_SHIFT_ALPHA #define TAPPING_TERM 150 //#define BOOTMAGIC_KEY_SALT KC_LCTL diff --git a/keyboards/jj50/keymaps/archetype/keymap.c b/keyboards/jj50/keymaps/archetype/keymap.c index 0704943e082..82c615f135a 100644 --- a/keyboards/jj50/keymaps/archetype/keymap.c +++ b/keyboards/jj50/keymaps/archetype/keymap.c @@ -32,71 +32,131 @@ enum { TD_BSPC_DEL = 0, TD_LCTL_LBRC = 1, TD_LALT_RBRC = 2, + TD_ESC_LAYER = 3, }; void left_brackets(qk_tap_dance_state_t *state, void *user_data) { if (state->count == 1) { - if (state->interrupted || !state->pressed) { - register_mods(MOD_LSFT); - register_code(KC_9); + if (!state->pressed) { + register_code16(KC_LPRN); } else { - register_mods(MOD_LCTL); + register_code(KC_LCTL); } } else if (state->count == 2) { - register_code(KC_LBRC); + register_code16(KC_LBRC); } else if (state->count == 3) { - register_mods(MOD_LSFT); - register_code(KC_LBRC); + register_code16(KC_LCBR); } } void left_brackets_reset(qk_tap_dance_state_t *state, void *user_data) { if (state->count == 1) { - if (state->interrupted || !state->pressed) { - unregister_mods(MOD_LSFT); - unregister_code(KC_9); - } else { - unregister_mods(MOD_LCTL); - } + unregister_code16(KC_LPRN); } else if (state->count == 2) { - unregister_code(KC_LBRC); + unregister_code16(KC_LBRC); } else if (state->count == 3) { - unregister_mods(MOD_LSFT); - unregister_code(KC_LBRC); + unregister_code16(KC_LCBR); } + + unregister_code(KC_LCTL); } void right_brackets(qk_tap_dance_state_t *state, void *user_data) { if (state->count == 1) { - if (state->interrupted || !state->pressed) { - register_mods(MOD_LSFT); - register_code(KC_0); + if (!state->pressed) { + register_code16(KC_RPRN); } else { - register_mods(MOD_LALT); + register_code(KC_LALT); } } else if (state->count == 2) { - register_code(KC_RBRC); + register_code16(KC_RBRC); } else if (state->count == 3) { - register_mods(MOD_LSFT); - register_code(KC_RBRC); + register_code16(KC_RCBR); } } void right_brackets_reset(qk_tap_dance_state_t *state, void *user_data) { if (state->count == 1) { - if (state->interrupted || !state->pressed) { - unregister_mods(MOD_LSFT); - unregister_code(KC_0); - } else { - unregister_mods(MOD_LALT); - } + unregister_code16(KC_RPRN); } else if (state->count == 2) { - unregister_code(KC_RBRC); + unregister_code16(KC_RBRC); } else if (state->count == 3) { - unregister_mods(MOD_LSFT); - unregister_code(KC_RBRC); + unregister_code16(KC_RCBR); } + + unregister_code(KC_LALT); +} + +typedef struct { + bool is_press_action; + int state; +} tap; + +enum { + SINGLE_TAP = 1, + SINGLE_HOLD = 2, + DOUBLE_TAP = 3, + DOUBLE_HOLD = 4, + DOUBLE_SINGLE_TAP = 5, //send two single taps + TRIPLE_TAP = 6, + TRIPLE_HOLD = 7, + TRIPLE_SINGLE_TAP = 8, //send three single taps +}; + +int cur_dance (qk_tap_dance_state_t *state) { + if (state->count == 1) { + if (state->interrupted || !state->pressed) return SINGLE_TAP; + else return SINGLE_HOLD; + } + else if (state->count == 2) { + if (state->interrupted) return DOUBLE_SINGLE_TAP; + else if (state->pressed) return DOUBLE_HOLD; + else return DOUBLE_TAP; + } + + if (state->count == 3) { + if (state->interrupted) return TRIPLE_SINGLE_TAP; + else if (state->pressed) return TRIPLE_HOLD; + else return TRIPLE_TAP; + } + else return 9; //magic number. At some point this method will expand to work for more presses +} + +static tap tap_state = { + .is_press_action = true, + .state = 0 +}; + +void layer_switcher (qk_tap_dance_state_t *state, void *user_data) { + tap_state.state = cur_dance(state); + switch (tap_state.state) { + case SINGLE_TAP: register_code(KC_ESC); break; + case SINGLE_HOLD: register_code(KC_ESC); break; + case DOUBLE_TAP: register_code(KC_ESC); break; + case DOUBLE_HOLD: layer_on(_COLEMAK); break; + case DOUBLE_SINGLE_TAP: register_code(KC_ESC); unregister_code(KC_ESC); register_code(KC_ESC); break; + case TRIPLE_TAP: register_code(KC_ESC); break; + case TRIPLE_HOLD: layer_on(_FX); break; + case TRIPLE_SINGLE_TAP: register_code(KC_ESC); unregister_code(KC_ESC); register_code(KC_ESC); unregister_code(KC_ESC); register_code(KC_ESC); break; + //Last case is for fast typing. Assuming your key is `f`: + //For example, when typing the word `buffer`, and you want to make sure that you send `ff` and not `Esc`. + //In order to type `ff` when typing fast, the next character will have to be hit within the `TAPPING_TERM`, which by default is 200ms. + } +} + +void layer_switcher_reset (qk_tap_dance_state_t *state, void *user_data) { + switch (tap_state.state) { + case SINGLE_TAP: unregister_code(KC_ESC); break; + case SINGLE_HOLD: unregister_code(KC_ESC); break; + case DOUBLE_TAP: unregister_code(KC_ESC); break; + case DOUBLE_HOLD: break; + case DOUBLE_SINGLE_TAP: unregister_code(KC_ESC); break; + case TRIPLE_TAP: unregister_code(KC_ESC); break; + case TRIPLE_HOLD: break; + case TRIPLE_SINGLE_TAP: unregister_code(KC_ESC); break; + } + tap_state.state = 0; } qk_tap_dance_action_t tap_dance_actions[] = { @@ -106,6 +166,8 @@ qk_tap_dance_action_t tap_dance_actions[] = { [TD_LCTL_LBRC] = ACTION_TAP_DANCE_FN_ADVANCED(NULL, left_brackets, left_brackets_reset), // Single tap = ) | Double tap = ] | Triple tap = } | Single hold = KC_LALT [TD_LALT_RBRC] = ACTION_TAP_DANCE_FN_ADVANCED(NULL, right_brackets, right_brackets_reset), + // Layer Switcher ESC + [TD_ESC_LAYER] = ACTION_TAP_DANCE_FN_ADVANCED_TIME(NULL, layer_switcher, layer_switcher_reset, 100), }; @@ -115,7 +177,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { //,----------------+-----------------+-----------------+-----------------+-----------------+-----------------+-----------------+-----------------+-----------------+-----------------+-----------------+-----------------+. //| | | | | | | | | | | | | - KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_BSPC, \ + TD(TD_ESC_LAYER), KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_BSPC, \ //| | | | | | | | | | | | | //,----------------+-----------------+-----------------+-----------------+-----------------+-----------------+-----------------+-----------------+-----------------+-----------------+-----------------+-----------------+| //| | | | | | | | | | | | | @@ -131,7 +193,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { //| | | | | | | | | | | | | //,----------------+-----------------+-----------------+-----------------+-----------------+-----------------+-----------------+-----------------+-----------------+-----------------+-----------------+-----------------+| //| | | | | | | | | | | | | - TD(TD_LCTL_LBRC), KC_LGUI, TD(TD_LALT_RBRC), _______, _______, LT(_FN, KC_SPC), LT(_FN, KC_SPC), _______, KC_COMM, KC_LEFT, KC_DOWN, KC_RGHT \ + TD(TD_LCTL_LBRC), KC_LGUI, TD(TD_LALT_RBRC), _______, _______, LT(_FN, KC_SPC), _______, LT(_FX, KC_SPC), KC_COMM, KC_LEFT, KC_DOWN, KC_RGHT \ //| | | | | | | | | | | | | //,----------------+-----------------+-----------------+-----------------+-----------------+-----------------+-----------------+-----------------+-----------------+-----------------+-----------------+-----------------+' ), @@ -194,19 +256,19 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { //| | | | | | | | | | | | | //,----------------+-----------------+-----------------+-----------------+-----------------+-----------------+-----------------+-----------------+-----------------+-----------------+-----------------+-----------------+| //| | | | | | | | | | | | | - _______, BL_ON, BL_INC, RGB_TOG, RGB_MOD, _______, _______, _______, _______, _______, _______, _______, \ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, RGB_VAI, _______, \ //| | | | | | | | | | | | | //,----------------+-----------------+-----------------+-----------------+-----------------+-----------------+-----------------+-----------------+-----------------+-----------------+-----------------+-----------------+| //| | | | | | | | | | | | | - _______, BL_OFF, BL_DEC, RGB_HUI, RGB_SAI, RGB_VAI, RGB_SPI, _______, _______, _______, _______, _______, \ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, RGB_VAD, _______, \ //| | | | | | | | | | | | | //,----------------+-----------------+-----------------+-----------------+-----------------+-----------------+-----------------+-----------------+-----------------+-----------------+-----------------+-----------------+| //| | | | | | | | | | | | | - _______, RGB_TOG, BL_STEP, RGB_HUD, RGB_SAD, RGB_VAD, RGB_SPD, _______, _______, _______, _______, _______, \ + _______, _______, _______, _______, _______, _______, _______, _______, _______, RGB_MOD, RGB_HUI, RGB_TOG, \ //| | | | | | | | | | | | | //,----------------+-----------------+-----------------+-----------------+-----------------+-----------------+-----------------+-----------------+-----------------+-----------------+-----------------+-----------------+| //| | | | | | | | | | | | | - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ \ + _______, _______, _______, _______, _______, _______, _______, _______, _______, RGB_SAI, RGB_HUD, RGB_SAD \ //| | | | | | | | | | | | | //,----------------+-----------------+-----------------+-----------------+-----------------+-----------------+-----------------+-----------------+-----------------+-----------------+-----------------+-----------------+' ), From 565a7812ab734db7692d3b3480b456f5e7af0614 Mon Sep 17 00:00:00 2001 From: Rob Rogers Date: Tue, 16 Apr 2019 12:29:48 -0500 Subject: [PATCH 115/171] [Keyboard] Crkbd RGB Matrix config with WS2812 (#5627) --- keyboards/crkbd/rev1/config.h | 7 ++ keyboards/crkbd/rev1/rev1.c | 171 ++++++++++++++++++++++++++++++++++ 2 files changed, 178 insertions(+) diff --git a/keyboards/crkbd/rev1/config.h b/keyboards/crkbd/rev1/config.h index 55bf5930fd2..6564c8503d0 100644 --- a/keyboards/crkbd/rev1/config.h +++ b/keyboards/crkbd/rev1/config.h @@ -53,7 +53,14 @@ along with this program. If not, see . /* ws2812 RGB LED */ #define RGB_DI_PIN D3 +#ifdef RGBLIGHT_ENABLE #define RGBLED_NUM 12 // Number of LEDs +#endif + +#ifdef RGB_MATRIX_ENABLE +#define RGBLED_NUM 54 // Number of LEDs +#define DRIVER_LED_TOTAL RGBLED_NUM +#endif /* * Feature disable options diff --git a/keyboards/crkbd/rev1/rev1.c b/keyboards/crkbd/rev1/rev1.c index 6523feebade..a0bc4b4c21b 100644 --- a/keyboards/crkbd/rev1/rev1.c +++ b/keyboards/crkbd/rev1/rev1.c @@ -13,6 +13,177 @@ void led_set_kb(uint8_t usb_led) { } #endif +#ifdef RGB_MATRIX_ENABLE + + // Logical Layout + // Columns + // Left + // 0 1 2 3 4 5 + // ROWS + // 25 24 19 18 11 10 0 + // 03 02 01 + // 26 23 20 17 12 09 1 + // 04 05 06 + // 27 22 21 16 13 08 2 + // + // 15 14 07 3 + // + // Right + // 0 1 2 3 4 5 + // ROWS + // 25 24 19 18 11 10 4 + // 03 02 01 + // 26 23 20 17 12 09 5 + // 04 05 06 + // 27 22 21 16 13 08 6 + // + // 15 14 07 7 + // + // Physical Layout + // Columns + // 0 1 2 3 4 5 6 7 8 9 10 11 12 13 + // ROWS + // 25 24 19 18 11 10 10 11 18 19 24 25 0 + // 03 02 01 01 02 03 + // 26 23 20 17 12 09 09 12 17 20 23 26 1 + // 04 04 + // 27 22 21 16 13 08 08 13 16 21 22 27 2 + // 05 06 06 05 + // 15 14 07 07 14 15 3 + +/* {row | col << 4} logical layout rows/cols + * | {x=0..224, y=0..64} physical layout + * | | | modifier + * | | | */ + const rgb_led g_rgb_leds_left[27] = { + //LEFT + { { 0xFF }, { 85, 16 }, 0 }, // 1 + { { 0xFF }, { 50, 13 }, 0 }, // 2 + { { 0xFF }, { 16, 20 }, 0 }, // 3 + { { 0xFF }, { 16, 38 }, 0 }, // 4 + { { 0xFF }, { 50, 48 }, 0 }, // 5 + { { 0xFF }, { 85, 52 }, 0 }, // 6 + + { { 3 | ( 5 << 4 ) }, { 95, 63 }, 1 }, // 7 + { { 2 | ( 5 << 4 ) }, { 85, 39 }, 0 }, // 8 + { { 1 | ( 5 << 4 ) }, { 85, 21 }, 0 }, // 9 + { { 0 | ( 5 << 4 ) }, { 85, 4 }, 0 }, //10 + { { 0 | ( 4 << 4 ) }, { 68, 02 }, 0 }, //11 + { { 1 | ( 4 << 4 ) }, { 68, 19 }, 0 }, //12 + { { 2 | ( 4 << 4 ) }, { 68, 37 }, 0 }, //13 + { { 3 | ( 4 << 4 ) }, { 80, 58 }, 1 }, //14 + { { 3 | ( 3 << 4 ) }, { 60, 55 }, 1 }, //15 + { { 2 | ( 3 << 4 ) }, { 50, 35 }, 0 }, //16 + { { 1 | ( 3 << 4 ) }, { 50, 13 }, 0 }, //17 + { { 0 | ( 3 << 4 ) }, { 50, 0 }, 0 }, //18 + { { 0 | ( 2 << 4 ) }, { 33, 3 }, 0 }, //19 + { { 1 | ( 2 << 4 ) }, { 33, 20 }, 0 }, //20 + { { 2 | ( 2 << 4 ) }, { 33, 37 }, 0 }, //21 + { { 2 | ( 1 << 4 ) }, { 16, 42 }, 0 }, //22 + { { 1 | ( 1 << 4 ) }, { 16, 24 }, 0 }, //23 + { { 0 | ( 1 << 4 ) }, { 16, 7 }, 0 }, //24 + { { 0 | ( 0 << 4 ) }, { 0, 7 }, 1 }, //25 + { { 1 | ( 0 << 4 ) }, { 0, 24 }, 1 }, //26 + { { 2 | ( 0 << 4 ) }, { 0, 41 }, 1 }, //27 + }; + const rgb_led g_rgb_leds_right[27] = { + //RIGHT + { { 0xFF }, { 139, 16 }, 0 }, // 1 + { { 0xFF }, { 174, 13 }, 0 }, // 2 + { { 0xFF }, { 208, 20 }, 0 }, // 3 + { { 0xFF }, { 208, 38 }, 0 }, // 4 + { { 0xFF }, { 174, 48 }, 0 }, // 5 + { { 0xFF }, { 139, 52 }, 0 }, // 6 + + { { 7 | ( 5 << 4 ) }, { 129, 63 }, 1 }, // 7 + { { 6 | ( 5 << 4 ) }, { 139, 39 }, 0 }, // 8 + { { 5 | ( 5 << 4 ) }, { 139, 21 }, 0 }, // 9 + { { 4 | ( 5 << 4 ) }, { 139, 4 }, 0 }, //10 + { { 4 | ( 4 << 4 ) }, { 156, 02 }, 0 }, //11 + { { 5 | ( 4 << 4 ) }, { 156, 19 }, 0 }, //12 + { { 6 | ( 4 << 4 ) }, { 156, 37 }, 0 }, //13 + { { 7 | ( 4 << 4 ) }, { 144, 58 }, 1 }, //14 + { { 7 | ( 3 << 4 ) }, { 164, 55 }, 1 }, //15 + { { 6 | ( 3 << 4 ) }, { 174, 35 }, 0 }, //16 + { { 5 | ( 3 << 4 ) }, { 174, 13 }, 0 }, //17 + { { 4 | ( 3 << 4 ) }, { 174, 0 }, 0 }, //18 + { { 4 | ( 2 << 4 ) }, { 191, 3 }, 0 }, //19 + { { 5 | ( 2 << 4 ) }, { 191, 20 }, 0 }, //20 + { { 6 | ( 2 << 4 ) }, { 191, 37 }, 0 }, //21 + { { 6 | ( 1 << 4 ) }, { 208, 42 }, 0 }, //22 + { { 5 | ( 1 << 4 ) }, { 208, 24 }, 0 }, //23 + { { 4 | ( 1 << 4 ) }, { 208, 7 }, 0 }, //24 + { { 4 | ( 0 << 4 ) }, { 224, 7 }, 1 }, //25 + { { 5 | ( 0 << 4 ) }, { 224, 24 }, 1 }, //26 + { { 6 | ( 0 << 4 ) }, { 224, 41 }, 1 }, //27 + + }; + + const rgb_led g_rgb_leds[DRIVER_LED_TOTAL] = { + + //LEFT + { { 0xFF }, { 85, 16 }, 0 }, // 1 + { { 0xFF }, { 50, 13 }, 0 }, // 2 + { { 0xFF }, { 16, 20 }, 0 }, // 3 + { { 0xFF }, { 16, 38 }, 0 }, // 4 + { { 0xFF }, { 50, 48 }, 0 }, // 5 + { { 0xFF }, { 85, 52 }, 0 }, // 6 + + { { 3 | ( 5 << 4 ) }, { 95, 63 }, 1 }, // 7 + { { 2 | ( 5 << 4 ) }, { 85, 39 }, 0 }, // 8 + { { 1 | ( 5 << 4 ) }, { 85, 21 }, 0 }, // 9 + { { 0 | ( 5 << 4 ) }, { 85, 4 }, 0 }, //10 + { { 0 | ( 4 << 4 ) }, { 68, 02 }, 0 }, //11 + { { 1 | ( 4 << 4 ) }, { 68, 19 }, 0 }, //12 + { { 2 | ( 4 << 4 ) }, { 68, 37 }, 0 }, //13 + { { 3 | ( 4 << 4 ) }, { 80, 58 }, 1 }, //14 + { { 3 | ( 3 << 4 ) }, { 60, 55 }, 1 }, //15 + { { 2 | ( 3 << 4 ) }, { 50, 35 }, 0 }, //16 + { { 1 | ( 3 << 4 ) }, { 50, 13 }, 0 }, //17 + { { 0 | ( 3 << 4 ) }, { 50, 0 }, 0 }, //18 + { { 0 | ( 2 << 4 ) }, { 33, 3 }, 0 }, //19 + { { 1 | ( 2 << 4 ) }, { 33, 20 }, 0 }, //20 + { { 2 | ( 2 << 4 ) }, { 33, 37 }, 0 }, //21 + { { 2 | ( 1 << 4 ) }, { 16, 42 }, 0 }, //22 + { { 1 | ( 1 << 4 ) }, { 16, 24 }, 0 }, //23 + { { 0 | ( 1 << 4 ) }, { 16, 7 }, 0 }, //24 + { { 0 | ( 0 << 4 ) }, { 0, 7 }, 1 }, //25 + { { 1 | ( 0 << 4 ) }, { 0, 24 }, 1 }, //26 + { { 2 | ( 0 << 4 ) }, { 0, 41 }, 1 }, //27 + + //RIGHT + { { 0xFF }, { 139, 16 }, 0 }, // 1 + { { 0xFF }, { 174, 13 }, 0 }, // 2 + { { 0xFF }, { 208, 20 }, 0 }, // 3 + { { 0xFF }, { 208, 38 }, 0 }, // 4 + { { 0xFF }, { 174, 48 }, 0 }, // 5 + { { 0xFF }, { 139, 52 }, 0 }, // 6 + + { { 7 | ( 5 << 4 ) }, { 129, 63 }, 1 }, // 7 + { { 6 | ( 5 << 4 ) }, { 139, 39 }, 0 }, // 8 + { { 5 | ( 5 << 4 ) }, { 139, 21 }, 0 }, // 9 + { { 4 | ( 5 << 4 ) }, { 139, 4 }, 0 }, //10 + { { 4 | ( 4 << 4 ) }, { 156, 02 }, 0 }, //11 + { { 5 | ( 4 << 4 ) }, { 156, 19 }, 0 }, //12 + { { 6 | ( 4 << 4 ) }, { 156, 37 }, 0 }, //13 + { { 7 | ( 4 << 4 ) }, { 144, 58 }, 1 }, //14 + { { 7 | ( 3 << 4 ) }, { 164, 55 }, 1 }, //15 + { { 6 | ( 3 << 4 ) }, { 174, 35 }, 0 }, //16 + { { 5 | ( 3 << 4 ) }, { 174, 13 }, 0 }, //17 + { { 4 | ( 3 << 4 ) }, { 174, 0 }, 0 }, //18 + { { 4 | ( 2 << 4 ) }, { 191, 3 }, 0 }, //19 + { { 5 | ( 2 << 4 ) }, { 191, 20 }, 0 }, //20 + { { 6 | ( 2 << 4 ) }, { 191, 37 }, 0 }, //21 + { { 6 | ( 1 << 4 ) }, { 208, 42 }, 0 }, //22 + { { 5 | ( 1 << 4 ) }, { 208, 24 }, 0 }, //23 + { { 4 | ( 1 << 4 ) }, { 208, 7 }, 0 }, //24 + { { 4 | ( 0 << 4 ) }, { 224, 7 }, 1 }, //25 + { { 5 | ( 0 << 4 ) }, { 224, 24 }, 1 }, //26 + { { 6 | ( 0 << 4 ) }, { 224, 41 }, 1 }, //27 + + }; + +#endif void matrix_init_kb(void) { #ifdef AUDIO_ENABLE From 93b7fccad65aa4c12b37bc3d1a507ae909511587 Mon Sep 17 00:00:00 2001 From: marcoSchr <49691247+marcoSchr@users.noreply.github.com> Date: Tue, 16 Apr 2019 19:39:57 +0200 Subject: [PATCH 116/171] [Keymap] Use Right Alt/Ctrl on right side of OK60 (#5630) * Use Right Alt/Ctrl on right side of OK60 * Update keyboards/ok60/keymaps/default/keymap.c Co-Authored-By: marcoSchr <49691247+marcoSchr@users.noreply.github.com> --- keyboards/ok60/keymaps/default/keymap.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/keyboards/ok60/keymaps/default/keymap.c b/keyboards/ok60/keymaps/default/keymap.c index 7c5a90856e8..c51510c646e 100644 --- a/keyboards/ok60/keymaps/default/keymap.c +++ b/keyboards/ok60/keymaps/default/keymap.c @@ -7,7 +7,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_LSFT, - KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_LALT, MO(1), KC_MENU, KC_LCTL + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, MO(1), KC_APP, KC_RCTL ), [1] = LAYOUT_60_ansi( From 0a6beab2243cd9183127041917bb4c3ce6a22bd9 Mon Sep 17 00:00:00 2001 From: ishtob Date: Tue, 16 Apr 2019 17:49:24 -0400 Subject: [PATCH 117/171] [Keyboard] Hadron keymap and config updates (#5632) * update hadron keymaps, code cleanup * keymap update * refactor custom matrix to use quantum matrix defines * fix wrong pin for matrix --- keyboards/hadron/ver3/chconf.h | 4 +- keyboards/hadron/ver3/config.h | 42 ++-- keyboards/hadron/ver3/halconf.h | 2 +- .../hadron/ver3/keymaps/default/keymap.c | 10 +- keyboards/hadron/ver3/keymaps/ishtob/keymap.c | 10 +- keyboards/hadron/ver3/keymaps/readme.md | 7 +- keyboards/hadron/ver3/matrix.c | 195 ------------------ keyboards/hadron/ver3/mcuconf.h | 2 +- keyboards/hadron/ver3/rules.mk | 46 +---- keyboards/hadron/ver3/ver3.c | 38 +++- keyboards/hadron/ver3/ver3.h | 9 +- 11 files changed, 90 insertions(+), 275 deletions(-) delete mode 100644 keyboards/hadron/ver3/matrix.c diff --git a/keyboards/hadron/ver3/chconf.h b/keyboards/hadron/ver3/chconf.h index 1d9f12ff1f8..ce44925f3c7 100644 --- a/keyboards/hadron/ver3/chconf.h +++ b/keyboards/hadron/ver3/chconf.h @@ -48,7 +48,7 @@ * @details Frequency of the system timer that drives the system ticks. This * setting also defines the system tick time unit. */ -#define CH_CFG_ST_FREQUENCY 100000 +#define CH_CFG_ST_FREQUENCY 1000 /** * @brief Time delta constant for the tick-less mode. @@ -58,7 +58,7 @@ * The value one is not valid, timeouts are rounded up to * this value. */ -#define CH_CFG_ST_TIMEDELTA 2 +#define CH_CFG_ST_TIMEDELTA 0 /** @} */ diff --git a/keyboards/hadron/ver3/config.h b/keyboards/hadron/ver3/config.h index 18049218251..82081ba4370 100644 --- a/keyboards/hadron/ver3/config.h +++ b/keyboards/hadron/ver3/config.h @@ -27,6 +27,28 @@ #define MATRIX_ROWS 5 #define MATRIX_COLS 15 +/* + * Keyboard Matrix Assignments + * + * Change this to how you wired your keyboard + * COLS: AVR pins used for columns, left to right + * ROWS: AVR pins used for rows, top to bottom + * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) + * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) + * +*/ +#undef MATRIX_ROW_PINS +#undef MATRIX_COL_PINS + +#define MATRIX_ROW_PINS { C15, C14, A10, A9, A8 } +#define MATRIX_COL_PINS { B8, B2, B10, A0, A1, A2, B0, A3, B1, A6, A7, B12, C13, B11, B9 } +#define UNUSED_PINS + +#define NUMBER_OF_ENCODERS 1 +#define ENCODERS_PAD_A { B13 } +#define ENCODERS_PAD_B { B14 } + + //Audio #undef AUDIO_VOICES #undef C6_AUDIO @@ -55,16 +77,6 @@ #define micro_oled_rotate_180 #endif -/* - * Keyboard Matrix Assignments - * - * Change this to how you wired your keyboard - * COLS: AVR pins used for columns, left to right - * ROWS: AVR pins used for rows, top to bottom - * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) - * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) - * -*/ /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ #define DEBOUNCE 6 @@ -185,13 +197,13 @@ #define ZC_DET_TIME 0 #define AUTO_CAL_TIME 3 -//#define RGBLIGHT_ANIMATIONS +#define RGBLIGHT_ANIMATIONS -//#define RGBLED_NUM 10 -//#define RGB_DI_PIN B5 -//#define DRIVER_LED_TOTAL RGBLED_NUM +#define RGBLED_NUM 10 +#define RGB_DI_PIN B5 +#define DRIVER_LED_TOTAL RGBLED_NUM -//#define RGB_MATRIX_KEYPRESSES +// #define RGB_MATRIX_KEYPRESSES #define SOLENOID_PIN A14 diff --git a/keyboards/hadron/ver3/halconf.h b/keyboards/hadron/ver3/halconf.h index c3e0cbb728c..a14ace02b4b 100644 --- a/keyboards/hadron/ver3/halconf.h +++ b/keyboards/hadron/ver3/halconf.h @@ -111,7 +111,7 @@ * @brief Enables the PWM subsystem. */ #if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM FALSE +#define HAL_USE_PWM TRUE #endif /** diff --git a/keyboards/hadron/ver3/keymaps/default/keymap.c b/keyboards/hadron/ver3/keymaps/default/keymap.c index ac1db2c2ac9..9afddba26a9 100644 --- a/keyboards/hadron/ver3/keymaps/default/keymap.c +++ b/keyboards/hadron/ver3/keymaps/default/keymap.c @@ -175,19 +175,19 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { /* Adjust (Lower + Raise) * ,------+------+------+------+------+------------------------------------------------. - * | Esc | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | - | + * | Reset|HPT TG|HPT FB|HPT M+|HPT M-|HPT RS| | | | | |EEP RS| * |------+------+------+------+------+------+------+------+------+------+------+------+--------------------. - * | Reset|RGB TG|RGB ST|RGBH -|RGBH +|RGBS -|RGBS +|RGBV -|RGBV +| | | | | | Del | + * | |RGB TG|RGB ST|RGBH -|RGBH +|RGBS -|RGBS +|RGBV -|RGBV +| | | | | | Del | * |------+------+------+------+------+------+------+------+------+------+------+------+------+------+------| * | | | |Aud on|Audoff|AGnorm| | | |AGswap|Qwerty|Colemk| | | | * |------+------+------+------+------+------+------+------+------+------+------+------+------+------+------| - * | |Voice-|Voice+|Mus on|Musoff| | | | | | | | BL + |BL ST |BL TG | + * | |Voice-|Voice+|Mus on|Musoff| | | | | | |BL - | BL + |BL ST |BL TG | * |------+------+------+------+------+------+------+------+------+------+------+------+------+------+------| - * | | | | | | | | | | | | | | | | + * | | | | | | | | | | | |CK RS |CK - |CK + |CK TG | * `--------------------------------------------------------------------------------------------------------' */ [_ADJUST] = LAYOUT( - RESET, HPT_TOG, HPT_FBK, HPT_MODI, HPT_MODD, HPT_RST , _______, _______, _______, _______, _______, _______, \ + RESET, HPT_TOG, HPT_FBK, HPT_MODI, HPT_MODD, HPT_RST , _______, _______, _______, _______, _______, EEP_RST, \ _______, RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, _______, _______, _______, _______, _______, KC_DEL, \ _______, _______, _______, AU_ON, AU_OFF, AG_NORM, _______, _______, _______, AG_SWAP, QWERTY, COLEMAK, _______, _______, _______, \ _______, MUV_DE, MUV_IN, MU_ON, MU_OFF, MI_ON, MI_OFF, _______, _______, _______, _______, BL_DEC, BL_INC, BL_STEP, BL_TOGG, \ diff --git a/keyboards/hadron/ver3/keymaps/ishtob/keymap.c b/keyboards/hadron/ver3/keymaps/ishtob/keymap.c index 140d148b7ee..51062acc227 100644 --- a/keyboards/hadron/ver3/keymaps/ishtob/keymap.c +++ b/keyboards/hadron/ver3/keymaps/ishtob/keymap.c @@ -153,19 +153,19 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { /* Adjust (Lower + Raise) * ,------+------+------+------+------+------------------------------------------------. - * | Esc | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | - | + * | Reset|HPT TG|HPT FB|HPT M+|HPT M-|HPT RS| | | | | |EEP RS| * |------+------+------+------+------+------+------+------+------+------+------+------+--------------------. - * | Reset|RGB TG|RGB ST|RGBH -|RGBH +|RGBS -|RGBS +|RGBV -|RGBV +| | | | | | Del | + * | |RGB TG|RGB ST|RGBH -|RGBH +|RGBS -|RGBS +|RGBV -|RGBV +| | | | | | Del | * |------+------+------+------+------+------+------+------+------+------+------+------+------+------+------| * | | | |Aud on|Audoff|AGnorm| | | |AGswap|Qwerty|Colemk| | | | * |------+------+------+------+------+------+------+------+------+------+------+------+------+------+------| - * | |Voice-|Voice+|Mus on|Musoff| | | | | | | | BL + |BL ST |BL TG | + * | |Voice-|Voice+|Mus on|Musoff| | | | | | |BL - | BL + |BL ST |BL TG | * |------+------+------+------+------+------+------+------+------+------+------+------+------+------+------| - * | | | | | | | | | | | | | | | | + * | | | | | | | | | | | |CK RS |CK - |CK + |CK TG | * `--------------------------------------------------------------------------------------------------------' */ [_ADJUST] = LAYOUT_wrapper( - _______, HPT_TOG, HPT_FBK, HPT_MODI, HPT_MODD, HPT_RST, _______, _______, _______, _______, _______, _______, \ + _______, HPT_TOG, HPT_FBK, HPT_MODI, HPT_MODD, HPT_RST, _______, _______, _______, _______, _______, EEP_RST, \ RESET, RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, _______, _______, _______, _______, _______, KC_DEL, \ _______, MAGIC_TOGGLE_NKRO, _______, AU_ON, AU_OFF, AG_NORM, _______, _______, _______, AG_SWAP, QWERTY, COLEMAK, _______, _______, _______, \ _______, MUV_DE, MUV_IN, MU_ON, MU_OFF, MI_ON, MI_OFF, _______, _______, _______, _______, BL_DEC, BL_INC, BL_STEP, BL_TOGG, \ diff --git a/keyboards/hadron/ver3/keymaps/readme.md b/keyboards/hadron/ver3/keymaps/readme.md index 54fb5f6d9e0..66bf06b7111 100644 --- a/keyboards/hadron/ver3/keymaps/readme.md +++ b/keyboards/hadron/ver3/keymaps/readme.md @@ -17,7 +17,8 @@ When adding your keymap to this list, keep it organised alphabetically (select l * **folder_name** description -# List of Planck keymaps +# List of Hadron keymaps -* **default** default Planck layout -* **cbbrowne** cbbrowne's Planck layout \ No newline at end of file +* **default** default Hadron layout +* **ishtob** ishtob's Hadron layout +* **sebaslayout** sebaslayout's Hadron layout \ No newline at end of file diff --git a/keyboards/hadron/ver3/matrix.c b/keyboards/hadron/ver3/matrix.c deleted file mode 100644 index 329d1328aba..00000000000 --- a/keyboards/hadron/ver3/matrix.c +++ /dev/null @@ -1,195 +0,0 @@ -#include -#include "hal.h" -#include "timer.h" -#include "wait.h" -#include "printf.h" -#include "backlight.h" -#include "matrix.h" -#include "action.h" -#include "keycode.h" - -/* matrix state(1:on, 0:off) */ -static matrix_row_t matrix[MATRIX_ROWS]; -static matrix_row_t matrix_debouncing[MATRIX_COLS]; -static bool debouncing = false; -static uint16_t debouncing_time = 0; - -static uint8_t encoder_state = 0; -static int8_t encoder_value = 0; -static int8_t encoder_LUT[] = { 0, -1, 1, 0, 1, 0, 0, -1, -1, 0, 0, 1, 0, 1, -1, 0 }; - -__attribute__ ((weak)) -void matrix_init_user(void) {} - -__attribute__ ((weak)) -void matrix_scan_user(void) {} - -__attribute__ ((weak)) -void matrix_init_kb(void) { - matrix_init_user(); -} - -__attribute__ ((weak)) -void matrix_scan_kb(void) { - matrix_scan_user(); -} - -void matrix_init(void) { - printf("matrix init\n"); - //debug_matrix = true; - - // encoder setup - palSetPadMode(GPIOB, 13, PAL_MODE_INPUT_PULLUP); - palSetPadMode(GPIOB, 14, PAL_MODE_INPUT_PULLUP); - - encoder_state = (palReadPad(GPIOB, 13) << 0) | (palReadPad(GPIOB, 14) << 1); - - // actual matrix setup - palSetPadMode(GPIOB, 8, PAL_MODE_OUTPUT_PUSHPULL); - palSetPadMode(GPIOB, 2, PAL_MODE_OUTPUT_PUSHPULL); - palSetPadMode(GPIOB, 10, PAL_MODE_OUTPUT_PUSHPULL); - palSetPadMode(GPIOA, 0, PAL_MODE_OUTPUT_PUSHPULL); - palSetPadMode(GPIOA, 1, PAL_MODE_OUTPUT_PUSHPULL); - palSetPadMode(GPIOA, 2, PAL_MODE_OUTPUT_PUSHPULL); - palSetPadMode(GPIOB, 0, PAL_MODE_OUTPUT_PUSHPULL); - palSetPadMode(GPIOA, 3, PAL_MODE_OUTPUT_PUSHPULL); - palSetPadMode(GPIOB, 1, PAL_MODE_OUTPUT_PUSHPULL); - palSetPadMode(GPIOA, 6, PAL_MODE_OUTPUT_PUSHPULL); - palSetPadMode(GPIOA, 7, PAL_MODE_OUTPUT_PUSHPULL); - palSetPadMode(GPIOB, 12, PAL_MODE_OUTPUT_PUSHPULL); - palSetPadMode(GPIOC, 13, PAL_MODE_OUTPUT_PUSHPULL); - palSetPadMode(GPIOB, 11, PAL_MODE_OUTPUT_PUSHPULL); - palSetPadMode(GPIOB, 9, PAL_MODE_OUTPUT_PUSHPULL); - - palSetPadMode(GPIOC, 15, PAL_MODE_INPUT_PULLDOWN); - palSetPadMode(GPIOC, 14, PAL_MODE_INPUT_PULLDOWN); - palSetPadMode(GPIOA, 10, PAL_MODE_INPUT_PULLDOWN); - palSetPadMode(GPIOA, 9, PAL_MODE_INPUT_PULLDOWN); - palSetPadMode(GPIOA, 8, PAL_MODE_INPUT_PULLDOWN); - - - memset(matrix, 0, MATRIX_ROWS * sizeof(matrix_row_t)); - memset(matrix_debouncing, 0, MATRIX_COLS * sizeof(matrix_row_t)); - - - matrix_init_quantum(); -} - -__attribute__ ((weak)) -void encoder_update(bool clockwise) { } - -#ifndef ENCODER_RESOLUTION - #define ENCODER_RESOLUTION 4 -#endif - -uint8_t matrix_scan(void) { - // encoder on B13 and B14 - encoder_state <<= 2; - encoder_state |= (palReadPad(GPIOB, 13) << 0) | (palReadPad(GPIOB, 14) << 1); - encoder_value += encoder_LUT[encoder_state & 0xF]; - if (encoder_value >= ENCODER_RESOLUTION) { - encoder_update(0); - } - if (encoder_value <= -ENCODER_RESOLUTION) { // direction is arbitrary here, but this clockwise - encoder_update(1); - } - encoder_value %= ENCODER_RESOLUTION; - - // actual matrix - for (int col = 0; col < MATRIX_COLS; col++) { - matrix_row_t data = 0; - - // strobe col { PB8, PB2, PB10, PA0, PA1, PA2, PB0, PA3, PB1, PA6, PA7, PB1, PA6, PA7, PB12, PC3, PB11, } - switch (col) { - case 0: palSetPad(GPIOB, 8); break; - case 1: palSetPad(GPIOB, 2); break; - case 2: palSetPad(GPIOB, 10); break; - case 3: palSetPad(GPIOA, 0); break; - case 4: palSetPad(GPIOA, 1); break; - case 5: palSetPad(GPIOA, 2); break; - case 6: palSetPad(GPIOB, 0); break; - case 7: palSetPad(GPIOA, 3); break; - case 8: palSetPad(GPIOB, 1); break; - case 9: palSetPad(GPIOA, 6); break; - case 10: palSetPad(GPIOA, 7); break; - case 11: palSetPad(GPIOB, 12); break; - case 12: palSetPad(GPIOC, 13); break; - case 13: palSetPad(GPIOB, 11); break; - case 14: palSetPad(GPIOB, 9); break; - } - - // need wait to settle pin state - wait_us(20); - - // read row data { PC15, PC14, PA10, PA9, PA8 } - data = ( - (palReadPad(GPIOC, 15) << 0 ) | - (palReadPad(GPIOC, 14) << 1 ) | - (palReadPad(GPIOA, 10) << 2 ) | - (palReadPad(GPIOA, 9) << 3 ) | - (palReadPad(GPIOA, 8) << 4 ) - ); - - // unstrobe col { PB8, PB2, PB10, PA0, PA1, PA2, PB0, PA3, PB1, PA6, PA7, PB1, PA6, PA7, PB12, PC3, PB11, } - switch (col) { - case 0: palClearPad(GPIOB, 8); break; - case 1: palClearPad(GPIOB, 2); break; - case 2: palClearPad(GPIOB, 10); break; - case 3: palClearPad(GPIOA, 0); break; - case 4: palClearPad(GPIOA, 1); break; - case 5: palClearPad(GPIOA, 2); break; - case 6: palClearPad(GPIOB, 0); break; - case 7: palClearPad(GPIOA, 3); break; - case 8: palClearPad(GPIOB, 1); break; - case 9: palClearPad(GPIOA, 6); break; - case 10: palClearPad(GPIOA, 7); break; - case 11: palClearPad(GPIOB, 12); break; - case 12: palClearPad(GPIOC, 13); break; - case 13: palClearPad(GPIOB, 11); break; - case 14: palClearPad(GPIOB, 9); break; - } - - if (matrix_debouncing[col] != data) { - matrix_debouncing[col] = data; - debouncing = true; - debouncing_time = timer_read(); - } - } - - if (debouncing && timer_elapsed(debouncing_time) > DEBOUNCE) { - for (int row = 0; row < MATRIX_ROWS; row++) { - matrix[row] = 0; - for (int col = 0; col < MATRIX_COLS; col++) { - matrix[row] |= ((matrix_debouncing[col] & (1 << row) ? 1 : 0) << col); - } - } - debouncing = false; - } - - matrix_scan_quantum(); - - return 1; -} - -bool matrix_is_on(uint8_t row, uint8_t col) { - return (matrix[row] & (1</os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES) -MCU_FAMILY = STM32 -MCU_SERIES = STM32F3xx - -# Linker script to use -# - it should exist either in /os/common/ports/ARMCMx/compilers/GCC/ld/ -# or /ld/ -MCU_LDSCRIPT = STM32F303xC - -# Startup code to use -# - it should exist in /os/common/startup/ARMCMx/compilers/GCC/mk/ -MCU_STARTUP = stm32f3xx - -# Board: it should exist either in /os/hal/boards/ -# or /boards -BOARD = GENERIC_STM32_F303XC +# projecct specific files # Cortex version -MCU = cortex-m4 - -# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7 -ARMV = 7 - -USE_FPU = yes - -# Vector table for application -# 0x00000000-0x00001000 area is occupied by bootlaoder.*/ -# The CORTEX_VTOR... is needed only for MCHCK/Infinity KB -# OPT_DEFS = -DCORTEX_VTOR_INIT=0x08005000 -OPT_DEFS = - -# Options to pass to dfu-util when flashing -DFU_ARGS = -d 0483:df11 -a 0 -s 0x08000000:leave +MCU = STM32F303 # Build Options # comment out to disable the options. # BACKLIGHT_ENABLE = no -BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration +BOOTMAGIC_ENABLE = full # Virtual DIP switch configuration ## (Note that for BOOTMAGIC on Teensy LC you have to use a custom .ld script.) MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug -COMMAND_ENABLE = no # Commands for debug and configuration +COMMAND_ENABLE = yes # Commands for debug and configuration #SLEEP_LED_ENABLE = yes # Breathing sleep LED during USB suspend NKRO_ENABLE = yes # USB Nkey Rollover -CUSTOM_MATRIX = yes # Custom matrix file +CUSTOM_MATRIX = no # Custom matrix file AUDIO_ENABLE = yes RGBLIGHT_ENABLE = no +RGB_MATRIX_ENABLE = no #WS2812 once arm_rgb is implemented HAPTIC_ENABLE += DRV2605L QWIIC_ENABLE += MICRO_OLED +ENCODER_ENABLER = yes # SERIAL_LINK_ENABLE = yes diff --git a/keyboards/hadron/ver3/ver3.c b/keyboards/hadron/ver3/ver3.c index 37169fe2f38..e99ed11a779 100644 --- a/keyboards/hadron/ver3/ver3.c +++ b/keyboards/hadron/ver3/ver3.c @@ -16,9 +16,36 @@ #include "ver3.h" #include "qwiic.h" #include "action_layer.h" -#include "matrix.h" #include "haptic.h" +#ifdef RGB_MATRIX_ENABLE +#include "rgblight.h" + +const rgb_led g_rgb_leds[DRIVER_LED_TOTAL] = { + /*{row | col << 4} + | {x=0..224, y=0..64} + | | modifier + | | | */ + {{1|(13<<4)}, {195, 3}, 0}, + {{4|(13<<4)}, {195, 16}, 0}, + {{4|(10<<4)}, {150, 16}, 0}, + {{4|(7<<4)}, {105, 16}, 0}, + {{4|(4<<4)}, {60, 16}, 0}, + {{4|(1<<4)}, {15, 16}, 0}, + {{1|(1<<4)}, {15, 3}, 0}, + {{1|(4<<4)}, {60, 3}, 0}, + {{1|(7<<4)}, {105, 3}, 0}, + {{1|(10<<4)}, {150, 3}, 0} +}; + +#endif + +uint8_t *o_fb; + +uint16_t counterst = 0; + + + #ifdef QWIIC_MICRO_OLED_ENABLE /* screen off after this many milliseconds */ @@ -41,7 +68,7 @@ void draw_ui(void) { send_command(DISPLAYON); /* Layer indicator is 41 x 10 pixels */ -#define LAYER_INDICATOR_X 0 +#define LAYER_INDICATOR_X 5 #define LAYER_INDICATOR_Y 0 draw_string(LAYER_INDICATOR_X + 1, LAYER_INDICATOR_Y + 2, "LAYER", PIXEL_ON, NORM, 0); @@ -49,7 +76,7 @@ void draw_ui(void) { draw_char(LAYER_INDICATOR_X + 34, LAYER_INDICATOR_Y + 2, layer + 0x30, PIXEL_ON, XOR, 0); /* Matrix display is 19 x 9 pixels */ -#define MATRIX_DISPLAY_X 0 +#define MATRIX_DISPLAY_X 5 #define MATRIX_DISPLAY_Y 18 for (uint8_t x = 0; x < MATRIX_ROWS; x++) { @@ -184,5 +211,10 @@ if (queue_for_send) { send_command(DISPLAYOFF); /* 0xAE */ } #endif + if (counterst == 0) { + //testPatternFB(o_fb); + } + counterst = (counterst + 1) % 1024; + //rgblight_task(); matrix_scan_user(); } diff --git a/keyboards/hadron/ver3/ver3.h b/keyboards/hadron/ver3/ver3.h index 516f7b9a1b9..95926469bf8 100644 --- a/keyboards/hadron/ver3/ver3.h +++ b/keyboards/hadron/ver3/ver3.h @@ -1,4 +1,4 @@ -/* Copyright 2018 Jack Humbert +/* Copyright 2018 ishtob * * This program is free software: you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -13,9 +13,6 @@ * You should have received a copy of the GNU General Public License * along with this program. If not, see . */ -#ifndef VER3_H -#define VER3_H +#pragma once -#include "hadron.h" - -#endif \ No newline at end of file +#include "hadron.h" \ No newline at end of file From 416eb1dee7163ae7456e5b2288a2b67790b997c3 Mon Sep 17 00:00:00 2001 From: marcoSchr <49691247+marcoSchr@users.noreply.github.com> Date: Wed, 17 Apr 2019 00:57:24 +0200 Subject: [PATCH 118/171] [Keyboard] Fix macro keycode for alpha keyboard (#5633) --- keyboards/alpha/keymaps/default/keymap.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/keyboards/alpha/keymaps/default/keymap.c b/keyboards/alpha/keymaps/default/keymap.c index e8d04b8e7ea..c18790fe4b3 100755 --- a/keyboards/alpha/keymaps/default/keymap.c +++ b/keyboards/alpha/keymaps/default/keymap.c @@ -6,7 +6,7 @@ #define OTHER 3 enum custom_keycodes { - MACRO1 + MACRO1 = SAFE_RANGE }; bool process_record_user(uint16_t keycode, keyrecord_t *record) { From 86855f4417a3793b1e33a8288f2755b782ef3228 Mon Sep 17 00:00:00 2001 From: Ryan Caltabiano Date: Thu, 28 Feb 2019 21:20:26 -0600 Subject: [PATCH 119/171] Xulkal Keymaps --- .../massdrop/ctrl/keymaps/xulkal/keymap.c | 105 ++++++++++++ .../massdrop/ctrl/keymaps/xulkal/rules.mk | 1 + keyboards/preonic/keymaps/xulkal/keymap.c | 148 +++++++++++++++++ keyboards/preonic/keymaps/xulkal/rules.mk | 6 + keyboards/sol/keymaps/xulkal/keymap.c | 155 ++++++++++++++++++ keyboards/sol/keymaps/xulkal/rules.mk | 42 +++++ users/xulkal/config.h | 13 ++ users/xulkal/layouts.h | 119 ++++++++++++++ users/xulkal/process_records.c | 85 ++++++++++ users/xulkal/process_records.h | 49 ++++++ users/xulkal/rules.mk | 13 ++ users/xulkal/xulkal.c | 1 + users/xulkal/xulkal.h | 4 + 13 files changed, 741 insertions(+) create mode 100644 keyboards/massdrop/ctrl/keymaps/xulkal/keymap.c create mode 100644 keyboards/massdrop/ctrl/keymaps/xulkal/rules.mk create mode 100644 keyboards/preonic/keymaps/xulkal/keymap.c create mode 100644 keyboards/preonic/keymaps/xulkal/rules.mk create mode 100644 keyboards/sol/keymaps/xulkal/keymap.c create mode 100644 keyboards/sol/keymaps/xulkal/rules.mk create mode 100644 users/xulkal/config.h create mode 100644 users/xulkal/layouts.h create mode 100644 users/xulkal/process_records.c create mode 100644 users/xulkal/process_records.h create mode 100644 users/xulkal/rules.mk create mode 100644 users/xulkal/xulkal.c create mode 100644 users/xulkal/xulkal.h diff --git a/keyboards/massdrop/ctrl/keymaps/xulkal/keymap.c b/keyboards/massdrop/ctrl/keymaps/xulkal/keymap.c new file mode 100644 index 00000000000..1e50b4a53c4 --- /dev/null +++ b/keyboards/massdrop/ctrl/keymaps/xulkal/keymap.c @@ -0,0 +1,105 @@ +#include QMK_KEYBOARD_H +#include "xulkal.h" + +enum ctrl_keycodes { + U_T_AUTO = SAFE_RANGE, //USB Extra Port Toggle Auto Detect / Always Active + U_T_AGCR, //USB Toggle Automatic GCR control + DBG_TOG, //DEBUG Toggle On / Off + DBG_MTRX, //DEBUG Toggle Matrix Prints + DBG_KBD, //DEBUG Toggle Keyboard Prints + DBG_MOU, //DEBUG Toggle Mouse Prints + MD_BOOT, //Restart into bootloader after hold timeout +}; + +#define TG_NKRO MAGIC_TOGGLE_NKRO //Toggle 6KRO / NKRO mode + +keymap_config_t keymap_config; + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [0] = LAYOUT( + KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR, KC_SLCK, KC_PAUS, \ + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, TD_BSPC, KC_INS, KC_HOME, KC_PGUP, \ + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, KC_END, KC_PGDN, \ + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, \ + KC_LSPO, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, TD_COMM, KC_DOT, KC_SLSH, KC_RSPC, KC_UP, \ + KC_LCPO, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, MO(1), KC_APP, KC_RCPC, KC_LEFT, KC_DOWN, KC_RGHT \ + ), + [1] = LAYOUT( + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_MUTE, _______, _______, \ + _______, RGB_RMOD, RGB_MOD,_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_MPLY, KC_MSTP, KC_VOLU, \ + RGB_SPI, RGB_SAI, RGB_VAI, RGB_HUI, MD_BOOT, _______, _______, U_T_AUTO,U_T_AGCR,_______, _______, _______, _______, _______, KC_MPRV, KC_MNXT, KC_VOLD, \ + RGB_SPD, RGB_SAD, RGB_VAD, RGB_HUD, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ + _______, RGB_TOG, _______, _______, _______, _______, TG_NKRO, _______, _______, _______, _______, _______, _______, \ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ \ + ), + /* + [X] = LAYOUT( + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ + _______, _______, _______, _______, _______, _______, TG_NKRO, _______, _______, _______, _______, _______, _______, \ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ \ + ), + */ +}; + +// Runs just one time when the keyboard initializes. +void matrix_init_user(void) { +}; + +// Runs constantly in the background, in a loop. +void matrix_scan_user(void) { +}; + +#define MODS_SHIFT (get_mods() & MOD_BIT(KC_LSHIFT) || get_mods() & MOD_BIT(KC_RSHIFT)) +#define MODS_CTRL (get_mods() & MOD_BIT(KC_LCTL) || get_mods() & MOD_BIT(KC_RCTRL)) +#define MODS_ALT (get_mods() & MOD_BIT(KC_LALT) || get_mods() & MOD_BIT(KC_RALT)) + +bool process_record_keymap(uint16_t keycode, keyrecord_t *record) { + static uint32_t key_timer; + + switch (keycode) { + case U_T_AUTO: + if (record->event.pressed && MODS_SHIFT && MODS_CTRL) { + TOGGLE_FLAG_AND_PRINT(usb_extra_manual, "USB extra port manual mode"); + } + return false; + case U_T_AGCR: + if (record->event.pressed && MODS_SHIFT && MODS_CTRL) { + TOGGLE_FLAG_AND_PRINT(usb_gcr_auto, "USB GCR auto mode"); + } + return false; + case DBG_TOG: + if (record->event.pressed) { + TOGGLE_FLAG_AND_PRINT(debug_enable, "Debug mode"); + } + return false; + case DBG_MTRX: + if (record->event.pressed) { + TOGGLE_FLAG_AND_PRINT(debug_matrix, "Debug matrix"); + } + return false; + case DBG_KBD: + if (record->event.pressed) { + TOGGLE_FLAG_AND_PRINT(debug_keyboard, "Debug keyboard"); + } + return false; + case DBG_MOU: + if (record->event.pressed) { + TOGGLE_FLAG_AND_PRINT(debug_mouse, "Debug mouse"); + } + return false; + case MD_BOOT: + if (record->event.pressed) { + key_timer = timer_read32(); + } else { + if (timer_elapsed32(key_timer) >= 500) { + reset_keyboard(); + } + } + return false; + default: + return true; //Process all other keycodes normally + } +} diff --git a/keyboards/massdrop/ctrl/keymaps/xulkal/rules.mk b/keyboards/massdrop/ctrl/keymaps/xulkal/rules.mk new file mode 100644 index 00000000000..f78fb3237b9 --- /dev/null +++ b/keyboards/massdrop/ctrl/keymaps/xulkal/rules.mk @@ -0,0 +1 @@ +DISABLE_LTO = yes diff --git a/keyboards/preonic/keymaps/xulkal/keymap.c b/keyboards/preonic/keymaps/xulkal/keymap.c new file mode 100644 index 00000000000..967cd5a0aba --- /dev/null +++ b/keyboards/preonic/keymaps/xulkal/keymap.c @@ -0,0 +1,148 @@ +#include QMK_KEYBOARD_H +#include "xulkal.h" + +#include "muse.h" + +#define EXPAND_LAYOUT(...) LAYOUT_preonic_grid(__VA_ARGS__) + +// Define your non-alpha grouping in this define's LAYOUT, and all your BASE_LAYERS will share the same mod/macro columns + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + /* Qwerty Layout + * ,------------------------------------------------. ,------------------------------------------------. + * | GESC | 1 | 2 | 3 | 4 | 5 | - | | = | 6 | 7 | 8 | 9 | 0 | BkSp | + * |------+------+------+------+------+------|------| |------|------+------+------+------+------+------| + * | Tab | Q | W | E | R | T | [ | | ] | Y | U | I | O | P | \ | + * |------+------+------+------+------+------|------| |------|------+------+------+------+------+------| + * |FN(CAPS)| A | S | D | F | G | ` | | ' | H | J | K | L | ; | Enter| + * |------+------+------+------+------+------+------| |------+------+------+------+------+------+------| + * | Sft[ | Z | X | C | V | B | RGB | |RGBRST| N | M | , | . | / | Sft] | + * |------+------+------+------+------+------+------| |------+------+------+------+------+------+------| + * | Ctrl | Win | LOWER| RAISE| Alt | Space|RGBRMOD| |RGBMOD| Space| Left | Up | Down | Right| Ctrl | + * |------+------+------+------+------+------+------| |------+------+------+------+------+------+------' + * | Space| DEL | | Enter| Space| + * `-------------' `-------------' + */ + [_QWERTY] = EXPAND_LAYOUT( \ + _________________QWERTY_L1_________________, _________________QWERTY_R1_________________, \ + _________________QWERTY_L2_________________, _________________QWERTY_R2_________________, \ + _________________QWERTY_L3_________________, _________________QWERTY_R3_________________, \ + _________________QWERTY_L4_________________, _________________QWERTY_R4_________________, \ + _________________QWERTY_L5_________________, _________________QWERTY_R5_________________ \ + ), + +#ifndef GAMELAYER_DISABLE + [_GAME] = EXPAND_LAYOUT( \ + ___________________GAME_L1_________________, ___________________GAME_R1_________________, \ + ___________________GAME_L2_________________, ___________________GAME_R2_________________, \ + ___________________GAME_L3_________________, ___________________GAME_R3_________________, \ + ___________________GAME_L4_________________, ___________________GAME_R4_________________, \ + ___________________GAME_L5_________________, ___________________GAME_R5_________________ \ + ), +#endif + + [_LOWER] = EXPAND_LAYOUT( \ + __________________LOWER_L1_________________, __________________LOWER_R1_________________, \ + __________________LOWER_L2_________________, __________________LOWER_R2_________________, \ + __________________LOWER_L3_________________, __________________LOWER_R3_________________, \ + __________________LOWER_L4_________________, __________________LOWER_R4_________________, \ + __________________LOWER_L5_________________, __________________LOWER_R5_________________ \ + ), + + [_RAISE] = EXPAND_LAYOUT( \ + __________________RAISE_L1_________________, __________________RAISE_R1_________________, \ + __________________RAISE_L2_________________, __________________RAISE_R2_________________, \ + __________________RAISE_L3_________________, __________________RAISE_R3_________________, \ + __________________RAISE_L4_________________, __________________RAISE_R4_________________, \ + __________________RAISE_L5_________________, __________________RAISE_R5_________________ \ + ), + +#ifdef TRILAYER_ENABLED + [_ADJUST] = EXPAND_LAYOUT( \ + _________________ADJUST_L1_________________, _________________ADJUST_R1_________________, \ + _________________ADJUST_L2_________________, _________________ADJUST_R2_________________, \ + _________________ADJUST_L3_________________, _________________ADJUST_R3_________________, \ + _________________ADJUST_L4_________________, _________________ADJUST_R4_________________, \ + _________________ADJUST_L5_________________, _________________ADJUST_R5_________________ \ + ), +#endif +}; + +bool muse_mode = false; +uint8_t last_muse_note = 0; +uint16_t muse_counter = 0; +uint8_t muse_offset = 70; +uint16_t muse_tempo = 50; + +void encoder_update_user(uint8_t index, bool clockwise) { + if (muse_mode) { + if (IS_LAYER_ON(_RAISE)) { + if (clockwise) { + muse_offset++; + } else { + muse_offset--; + } + } else { + if (clockwise) { + muse_tempo+=1; + } else { + muse_tempo-=1; + } + } + } else { + if (clockwise) { + register_code(KC_PGDN); + unregister_code(KC_PGDN); + } else { + register_code(KC_PGUP); + unregister_code(KC_PGUP); + } + } +} + +void dip_update(uint8_t index, bool active) { + switch (index) { + case 0: + if (active) { + layer_on(_ADJUST); + } else { + layer_off(_ADJUST); + } + break; + case 1: + if (active) { + muse_mode = true; + } else { + muse_mode = false; + #ifdef AUDIO_ENABLE + stop_all_notes(); + #endif + } + } +} + +void matrix_scan_user(void) { + #ifdef AUDIO_ENABLE + if (muse_mode) { + if (muse_counter == 0) { + uint8_t muse_note = muse_offset + SCALE[muse_clock_pulse()]; + if (muse_note != last_muse_note) { + stop_note(compute_freq_for_midi_note(last_muse_note)); + play_note(compute_freq_for_midi_note(muse_note), 0xF); + last_muse_note = muse_note; + } + } + muse_counter = (muse_counter + 1) % muse_tempo; + } + #endif +} + +bool music_mask_user(uint16_t keycode) { + switch (keycode) { + case RAISE: + case LOWER: + return false; + default: + return true; + } +} diff --git a/keyboards/preonic/keymaps/xulkal/rules.mk b/keyboards/preonic/keymaps/xulkal/rules.mk new file mode 100644 index 00000000000..f7e76252cd0 --- /dev/null +++ b/keyboards/preonic/keymaps/xulkal/rules.mk @@ -0,0 +1,6 @@ +SRC += muse.c + +ENCODER_ENABLE = no + +OPT_DEFS += -DTRILAYER_ENABLED +OPT_DEFS += -DAUDIO_CLICKY diff --git a/keyboards/sol/keymaps/xulkal/keymap.c b/keyboards/sol/keymaps/xulkal/keymap.c new file mode 100644 index 00000000000..be64d9e7c3a --- /dev/null +++ b/keyboards/sol/keymaps/xulkal/keymap.c @@ -0,0 +1,155 @@ +#include QMK_KEYBOARD_H +#include "xulkal.h" + +#ifdef PROTOCOL_LUFA +#include "lufa.h" +#include "split_util.h" +#endif + +#ifdef OLED_DRIVER_ENABLE + #include "oled_driver.h" +#endif + +#define EXPAND_LAYOUT(...) LAYOUT(__VA_ARGS__) + +// Define your non-alpha grouping in this define's LAYOUT, and all your BASE_LAYERS will share the same mod/macro columns + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + /* Qwerty Layout + * ,------------------------------------------------. ,------------------------------------------------. + * | GESC | 1 | 2 | 3 | 4 | 5 | - | | = | 6 | 7 | 8 | 9 | 0 | BkSp | + * |------+------+------+------+------+------|------| |------|------+------+------+------+------+------| + * | Tab | Q | W | E | R | T | [ | | ] | Y | U | I | O | P | \ | + * |------+------+------+------+------+------|------| |------|------+------+------+------+------+------| + * |FN(CAPS)| A | S | D | F | G | ` | | ' | H | J | K | L | ; | Enter| + * |------+------+------+------+------+------+------| |------+------+------+------+------+------+------| + * | Sft[ | Z | X | C | V | B | RGB | |RGBRST| N | M | , | . | / | Sft] | + * |------+------+------+------+------+------+------| |------+------+------+------+------+------+------| + * | Ctrl | Win | LOWER| RAISE| Alt | Space|RGBRMOD| |RGBMOD| Space| Left | Up | Down | Right| Ctrl | + * |------+------+------+------+------+------+------| |------+------+------+------+------+------+------' + * | Space| DEL | | Enter| Space| + * `-------------' `-------------' + */ + [_QWERTY] = EXPAND_LAYOUT( \ + _________________QWERTY_L1_________________, KC_MINS, KC_EQL, _________________QWERTY_R1_________________, \ + _________________QWERTY_L2_________________, KC_LBRC, KC_RBRC, _________________QWERTY_R2_________________, \ + _________________QWERTY_L3_________________, KC_GRV, KC_QUOT, _________________QWERTY_R3_________________, \ + _________________QWERTY_L4_________________, RGB_TOG, RGBRST, _________________QWERTY_R4_________________, \ + _________________QWERTY_L5_________________, RGB_RMOD, RGB_MOD, _________________QWERTY_R5_________________, \ + KC_VOLU, KC_VOLD, KC_SPC, KC_DEL, KC_ENT, KC_SPC, KC_VOLU, KC_VOLD \ + ), + +#ifndef GAMELAYER_DISABLE + [_GAME] = EXPAND_LAYOUT( \ + ___________________GAME_L1_________________, KC_MINS, KC_EQL, ___________________GAME_R1_________________, \ + ___________________GAME_L2_________________, KC_LBRC, KC_RBRC, ___________________GAME_R2_________________, \ + ___________________GAME_L3_________________, KC_GRV, KC_QUOT, ___________________GAME_R3_________________, \ + ___________________GAME_L4_________________, RGB_TOG, RGBRST, ___________________GAME_R4_________________, \ + ___________________GAME_L5_________________, RGB_RMOD, RGB_MOD, ___________________GAME_R5_________________, \ + KC_VOLU, KC_VOLD, KC_SPC, KC_DEL, KC_ENT, KC_SPC, KC_VOLU, KC_VOLD \ + ), +#endif + + [_LOWER] = EXPAND_LAYOUT( \ + __________________LOWER_L1_________________, KC_PMNS, KC_PPLS, __________________LOWER_R1_________________, \ + __________________LOWER_L2_________________, _______, _______, __________________LOWER_R2_________________, \ + __________________LOWER_L3_________________, _______, _______, __________________LOWER_R3_________________, \ + __________________LOWER_L4_________________, _______, _______, __________________LOWER_R4_________________, \ + __________________LOWER_L5_________________, _______, _______, __________________LOWER_R5_________________, \ + _______, _______, _______, _______, _______, _______, _______, _______ \ + ), + + [_RAISE] = EXPAND_LAYOUT( \ + __________________RAISE_L1_________________, _______, _______, __________________RAISE_R1_________________, \ + __________________RAISE_L2_________________, _______, _______, __________________RAISE_R2_________________, \ + __________________RAISE_L3_________________, _______, _______, __________________RAISE_R3_________________, \ + __________________RAISE_L4_________________, _______, _______, __________________RAISE_R4_________________, \ + __________________RAISE_L5_________________, _______, _______, __________________RAISE_R5_________________, \ + _______, _______, _______, _______, _______, _______, _______, _______ \ + ), + +#ifdef TRILAYER_ENABLED + [_RAISE] = EXPAND_LAYOUT( \ + _________________ADJUST_L1_________________, _______, _______, _________________ADJUST_R1_________________, \ + _________________ADJUST_L2_________________, _______, _______, _________________ADJUST_R2_________________, \ + _________________ADJUST_L3_________________, _______, _______, _________________ADJUST_R3_________________, \ + _________________ADJUST_L4_________________, _______, _______, _________________ADJUST_R4_________________, \ + _________________ADJUST_L5_________________, _______, _______, _________________ADJUST_R5_________________, \ + _______, _______, _______, _______, _______, _______, _______, _______ \ + ), +#endif +}; + +//SSD1306 OLED update loop, make sure to add #define SSD1306OLED in config.h +#ifdef OLED_DRIVER_ENABLE + +static void render_logo(void) { + static const char PROGMEM sol_logo[] = { + 0x80,0x81,0x82,0x83,0x84,0x85,0x86,0x87,0x88,0x89,0x8a,0x8b,0x8c,0x8d,0x8e,0x8f,0x90,0x91,0x92,0x93,0x94, + 0xa0,0xa1,0xa2,0xa3,0xa4,0xa5,0xa6,0xa7,0xa8,0xa9,0xaa,0xab,0xac,0xad,0xae,0xaf,0xb0,0xb1,0xb2,0xb3,0xb4, + 0xc0,0xc1,0xc2,0xc3,0xc4,0xc5,0xc6,0xc7,0xc8,0xc9,0xca,0xcb,0xcc,0xcd,0xce,0xcf,0xd0,0xd1,0xd2,0xd3,0xd4,0}; + + oled_write_P(sol_logo, false); +} + +static void render_status(void) { + // Render to mode icon + static const char PROGMEM mode_logo[2][4] = { + {0x97,0x98,0x0a,0}, + {0xb7,0xb8,0x0a,0} }; + + oled_write_P(mode_logo[0], false); + oled_write_P(mode_logo[1], false); + + // Define layers here, Have not worked out how to have text displayed for each layer. Copy down the number you see and add a case for it below + oled_write_P(PSTR("Layer: "), false); + switch (biton32(layer_state)) { + case _QWERTY: +#ifndef GAMELAYER_DISABLE + switch (biton32(default_layer_state)) { + case _QWERTY: + oled_write_P(PSTR("Default\n"), false); + break; + case _GAME: + oled_write_P(PSTR("Game\n"), false); + break; + default: + oled_write_P(PSTR("Undefined\n"), false); + break; + } +#else + oled_write_P(PSTR("Default\n"), false); +#endif + break; + case _LOWER: + oled_write_P(PSTR("Lower\n"), false); + break; + case _RAISE: + oled_write_P(PSTR("Raise\n"), false); + break; +#ifdef TRILAYER_ENABLED + case _ADJUST: + oled_write_P(PSTR("Adjust\n"), false); + break; +#endif + default: + oled_write_P(PSTR("Undefined\n"), false); + } + + // Host Keyboard LED Status + uint8_t led_usb_state = host_keyboard_leds(); + oled_write_P(led_usb_state & (1<event.pressed) { + set_single_persistent_default_layer(_QWERTY); + } + return false; + break; + case GAME: +#ifndef GAMELAYER_DISABLE + if (record->event.pressed) { + set_single_persistent_default_layer(_GAME); + } +#endif + return false; + break; + case LOWER: + if (record->event.pressed) { + layer_on(_LOWER); +#ifdef TRILAYER_ENABLED + update_tri_layer(_LOWER, _RAISE, _ADJUST); +#endif + } else { + layer_off(_LOWER); +#ifdef TRILAYER_ENABLED + update_tri_layer(_LOWER, _RAISE, _ADJUST); +#endif + } + return false; + break; + case RAISE: + if (record->event.pressed) { + layer_on(_RAISE); +#ifdef TRILAYER_ENABLED + update_tri_layer(_LOWER, _RAISE, _ADJUST); +#endif + } else { + layer_off(_RAISE); +#ifdef TRILAYER_ENABLED + update_tri_layer(_LOWER, _RAISE, _ADJUST); +#endif + } + return false; + break; + case RGBRST: + #ifdef RGBLIGHT_ENABLE + if (record->event.pressed) { + eeconfig_update_rgblight_default(); + rgblight_enable(); + } + #endif + return false; + break; + } + + return process_record_keymap(keycode, record) && +#if defined(RGBLIGHT_ENABLE) || defined(RGB_MATRIX_ENABLE) + process_record_rgb(keycode, record) && +#endif // RGBLIGHT_ENABLE; + true; +} + +__attribute__ ((weak)) +bool process_record_keymap(uint16_t keycode, keyrecord_t *record) { + return true; +} + + +__attribute__ ((weak)) +bool process_record_rgb(uint16_t keycode, keyrecord_t *record) { + return true; +} diff --git a/users/xulkal/process_records.h b/users/xulkal/process_records.h new file mode 100644 index 00000000000..9e429538092 --- /dev/null +++ b/users/xulkal/process_records.h @@ -0,0 +1,49 @@ +#pragma once +#include "quantum.h" + +#define RIS_ESC LT(_RAISE, KC_ESC) +#define RIS_CAPS LT(_RAISE, KC_CAPS) + +#ifdef TAP_DANCE_ENABLE +#include "process_tap_dance.h" + +//Tap Dance Declarations +enum { + COMM_QUOT = 0, + BACKSPACE, + TAP_TAB, + CTRL_MINUS, + CTRL_PLUS +}; + +#define TD_COMM TD(COMM_QUOT) +#define TD_BSPC TD(BACKSPACE) +#define TD_TAB TD(TAP_TAB) +#define TD_LCTL TD(CTRL_MINUS) +#define TD_RCTL TD(CTRL_PLUS) +#else +#define TD_COMM KC_COMM +#define TD_BSPC KC_BSPACE +#define TD_TAB KC_TAB +#define TD_LCTL KC_LCTL +#define TD_RCTL KC_RCTL +#endif + +enum layer_number { + _QWERTY = 0, + _GAME, + _LOWER, + _RAISE, + _ADJUST +}; + +enum custom_keycodes { + QWERTY = SAFE_RANGE, + GAME, + LOWER, + RAISE, + RGBRST +}; + +bool process_record_keymap(uint16_t keycode, keyrecord_t *record); +bool process_record_rgb(uint16_t keycode, keyrecord_t *record); diff --git a/users/xulkal/rules.mk b/users/xulkal/rules.mk new file mode 100644 index 00000000000..6758f52f5ff --- /dev/null +++ b/users/xulkal/rules.mk @@ -0,0 +1,13 @@ +SRC += xulkal.c \ + process_records.c + +# Some usual defaults +MOUSEKEY_ENABLE = no # Mouse keys (+4700) +EXTRAKEY_ENABLE = yes # Audio control and System control (+450) +TAP_DANCE_ENABLE = yes # Enable the tap dance feature. (+1100) + +ifneq ($(strip $(DISABLE_LTO)), yes) + EXTRAFLAGS += -flto + OPT_DEFS += -DNO_ACTION_MACRO + OPT_DEFS += -DNO_ACTION_FUNCTION +endif diff --git a/users/xulkal/xulkal.c b/users/xulkal/xulkal.c new file mode 100644 index 00000000000..ea9b6bdbbe2 --- /dev/null +++ b/users/xulkal/xulkal.c @@ -0,0 +1 @@ +#include "xulkal.h" diff --git a/users/xulkal/xulkal.h b/users/xulkal/xulkal.h new file mode 100644 index 00000000000..ae73599239b --- /dev/null +++ b/users/xulkal/xulkal.h @@ -0,0 +1,4 @@ +#pragma once + +#include "process_records.h" +#include "layouts.h" From 4cd3afc7e95f8ae58b13be544310c44e1dd5a775 Mon Sep 17 00:00:00 2001 From: Teodor Tomic Date: Wed, 17 Apr 2019 15:37:40 +0200 Subject: [PATCH 120/171] [keymap] TADA68 KBP-V60-like keymap (#5637) * [keymap] Added TADA68 KBParadise V60 like keymap * Remove extra define --- keyboards/tada68/keymaps/kbp-v60/keymap.c | 53 ++++++++++++++++++++++ keyboards/tada68/keymaps/kbp-v60/readme.md | 3 ++ keyboards/tada68/keymaps/kbp-v60/rules.mk | 18 ++++++++ 3 files changed, 74 insertions(+) create mode 100755 keyboards/tada68/keymaps/kbp-v60/keymap.c create mode 100755 keyboards/tada68/keymaps/kbp-v60/readme.md create mode 100644 keyboards/tada68/keymaps/kbp-v60/rules.mk diff --git a/keyboards/tada68/keymaps/kbp-v60/keymap.c b/keyboards/tada68/keymaps/kbp-v60/keymap.c new file mode 100755 index 00000000000..e7eef901978 --- /dev/null +++ b/keyboards/tada68/keymaps/kbp-v60/keymap.c @@ -0,0 +1,53 @@ +#include QMK_KEYBOARD_H + +// Each layer gets a name for readability, which is then used in the keymap matrix below. +// The underscores don't mean anything - you can have a layer called STUFF or any other name. +// Layer names don't all need to be of the same length, obviously, and you can also skip them +// entirely and just use numbers. +#define _BL 0 +#define _FL 1 + +// Tilde is shift-grave +#define KC_TLDE S(KC_GRV) + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + /* Keymap _BL: (Base Layer) Default Layer + * ,----------------------------------------------------------------. + * |Esc | 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =|Backsp |Del | + * |----------------------------------------------------------------| + * |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| \ |Home| + * |----------------------------------------------------------------| + * |CAPS | A| S| D| F| G| H| J| K| L| ;| '|Return |PgUp| + * |----------------------------------------------------------------| + * |Shift | Z| X| C| V| B| N| M| ,| .| /|Shift | Up|PgDn| + * |----------------------------------------------------------------| + * |Ctrl|Win |Alt | Space |Alt| FN|Ctrl|Lef|Dow|Rig | + * `----------------------------------------------------------------' + */ +[_BL] = LAYOUT_ansi( + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_DEL, \ + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_HOME,\ + MO(_FL), KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_PGUP,\ + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_PGDN,\ + KC_LCTL, KC_LGUI,KC_LALT, KC_SPC, MO(_FL), KC_ALGR, KC_RGUI, KC_LEFT, KC_DOWN, KC_RGHT), + + /* Keymap _FL: Function Layer + * ,----------------------------------------------------------------. + * | ` | F1|F2 |F3 |F4 |F5 |F6 |F7 |F8 |F9 |F10|F11|F12|Del |Ins | + * |----------------------------------------------------------------| + * | | |Up | |Prt|Bks|PgU|Hom|End|Pau| Up| | | |end | + * |----------------------------------------------------------------| + * | |Lef|Dow|Rig|Scl|Del|PgD| ~ |Ins|Lef|Dow|Rig| |Prt | + * |----------------------------------------------------------------| + * | | | |Bl-|BL |BL+| |VU-|VU+|MUT| | McL|MsU|McR | + * |----------------------------------------------------------------| + * | | | | | | | |MsL|MsD|MsR | + * `----------------------------------------------------------------' + */ +[_FL] = LAYOUT_ansi( + KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, KC_INS, \ + KC_CAPS, _______, KC_UP, _______, KC_BSPC, KC_PSCR, KC_PGUP, KC_HOME, KC_END, KC_PAUS, KC_UP, _______, _______, _______, KC_END, \ + _______, KC_LEFT, KC_DOWN, KC_RIGHT,KC_DEL, KC_SLCK, KC_PGDN, KC_TLDE, KC_INS, KC_LEFT, KC_DOWN, KC_RIGHT, _______, KC_PSCR,\ + _______, _______, _______, BL_DEC, BL_TOGG, BL_INC, _______, KC_VOLD, KC_VOLU, KC_MUTE, _______, KC_BTN1, KC_MS_U, KC_BTN2,\ + _______, _______, _______, _______, _______, _______, _______, KC_MS_L, KC_MS_D, KC_MS_R), +}; diff --git a/keyboards/tada68/keymaps/kbp-v60/readme.md b/keyboards/tada68/keymaps/kbp-v60/readme.md new file mode 100755 index 00000000000..f15b2781999 --- /dev/null +++ b/keyboards/tada68/keymaps/kbp-v60/readme.md @@ -0,0 +1,3 @@ +# KBP V60 like TADA68 layout + +This layout resembles the KBParadise V60 FN layer and moves around some keys. diff --git a/keyboards/tada68/keymaps/kbp-v60/rules.mk b/keyboards/tada68/keymaps/kbp-v60/rules.mk new file mode 100644 index 00000000000..53644093d6c --- /dev/null +++ b/keyboards/tada68/keymaps/kbp-v60/rules.mk @@ -0,0 +1,18 @@ +# Build Options +# change to "no" to disable the options, or define them in the Makefile in +# the appropriate keymap folder that will get included automatically +# +BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = yes # Mouse keys(+4700) +EXTRAKEY_ENABLE = yes # Audio control and System control(+450) +CONSOLE_ENABLE = no # Console for debug(+400) +COMMAND_ENABLE = yes # Commands for debug and configuration +NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality +MIDI_ENABLE = no # MIDI controls +AUDIO_ENABLE = no # Audio output on port C6 +UNICODE_ENABLE = no # Unicode +BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID +RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend + From f05927a2f0d688f8c4e9496ba995c454511b1a97 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?=C3=98yvind=20Wilhelmsen?= <46304257+oeywil@users.noreply.github.com> Date: Wed, 17 Apr 2019 20:07:19 +0200 Subject: [PATCH 121/171] [Keymap] Update to oeywil's keymap (#5614) * Switched to grid, added leader key and space cadet shift * renamed layer, removed sound * fixed comment * added comment * Added tap dance * Added comments * removed useless sound * removed useless comments * removed useless cases * changed to register_code16 function * renamed variables * fixed typo * fixed indentation --- keyboards/planck/keymaps/oeywil/.gitignore | 2 +- keyboards/planck/keymaps/oeywil/config.h | 13 +- keyboards/planck/keymaps/oeywil/keymap.c | 458 +++++++++++++----- keyboards/planck/keymaps/oeywil/no_keycodes.h | 28 ++ keyboards/planck/keymaps/oeywil/readme.md | 7 +- keyboards/planck/keymaps/oeywil/rules.mk | 14 +- 6 files changed, 371 insertions(+), 151 deletions(-) create mode 100644 keyboards/planck/keymaps/oeywil/no_keycodes.h diff --git a/keyboards/planck/keymaps/oeywil/.gitignore b/keyboards/planck/keymaps/oeywil/.gitignore index a7fbec47477..03b2b466681 100644 --- a/keyboards/planck/keymaps/oeywil/.gitignore +++ b/keyboards/planck/keymaps/oeywil/.gitignore @@ -1 +1 @@ -secret.h +secrets.h diff --git a/keyboards/planck/keymaps/oeywil/config.h b/keyboards/planck/keymaps/oeywil/config.h index 215ea9f75c9..09b22e193e8 100644 --- a/keyboards/planck/keymaps/oeywil/config.h +++ b/keyboards/planck/keymaps/oeywil/config.h @@ -1,7 +1,4 @@ -#ifndef CONFIG_USER_H -#define CONFIG_USER_H - -#include "config_common.h" +#pragma once #ifdef AUDIO_ENABLE #define STARTUP_SONG SONG(PLANCK_SOUND) @@ -32,7 +29,9 @@ /* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */ //#define MIDI_TONE_KEYCODE_OCTAVES 2 -// Most tactile encoders have detents every 4 stages -#define ENCODER_RESOLUTION 4 +// Leader Key +#define LEADER_TIMEOUT 250 +#define LEADER_PER_KEY_TIMING -#endif +// Tap dance +#define TAPPING_TERM 200 diff --git a/keyboards/planck/keymaps/oeywil/keymap.c b/keyboards/planck/keymaps/oeywil/keymap.c index f718c8f6a7b..59e76cab12b 100644 --- a/keyboards/planck/keymaps/oeywil/keymap.c +++ b/keyboards/planck/keymaps/oeywil/keymap.c @@ -1,112 +1,139 @@ #include QMK_KEYBOARD_H -#include "secret.h" +#include "no_keycodes.h" +#if __has_include("secrets.h") +# include "secrets.h" +#else +# define mail_str "" +# define pwd_str "" +#endif + +// layer definitions enum planck_layers { _DEFAULT, _LOWER, _RAISE, - _FUNCTION, _GAME, - _GAMERAISE + _GLOW }; -#define LOWER MO(_LOWER) -#define RAISE MO(_RAISE) -#define FUNCTION MO(_FUNCTION) -#define GAMER MO(_GAMERAISE) +// sounds +#ifdef AUDIO_ENABLE + float gamesong[][2] = SONG(MARIO_MUSHROOM); + float defsong[][2] = SONG(PLOVER_GOODBYE_SOUND); + float failed[][2] = SONG(TERMINAL_SOUND); +#endif -#define NO_OE KC_SCLN -#define NO_AE KC_QUOT -#define NO_AA KC_LBRC -#define NO_EXCL LSFT(KC_1) -#define NO_QEST LSFT(KC_MINS) -#define NO_APOS KC_BSLS -#define NO_QUOT LSFT(KC_2) -#define NO_UMLA KC_RBRC -#define NO_HASH LSFT(KC_3) -#define NO_FSLS LSFT(KC_7) -#define NO_LPAR LSFT(KC_8) -#define NO_RPAR LSFT(KC_9) -#define NO_ALFA ALGR(KC_2) -#define NO_AMPE LSFT(KC_6) -#define NO_USDO ALGR(KC_4) -#define NO_PERC LSFT(KC_5) -#define NO_BSLS KC_EQL -#define NO_ASTE LSFT(KC_BSLS) -#define NO_LBRA ALGR(KC_7) -#define NO_RBRA ALGR(KC_0) -#define NO_LBRC ALGR(KC_8) -#define NO_RBRC ALGR(KC_9) -#define NO_ANBR KC_NUBS -#define NO_DASH KC_SLSH -#define NO_PLUS KC_MINS -#define NO_EQUA LSFT(KC_0) +// leader key +bool leader_succeed; +bool leader_layer_game; +bool leader_layer_def; +LEADER_EXTERNS(); -#define TSKMGR LCTL(LSFT(KC_ESC)) -#define STEAM LSFT(KC_F7) -#define WKILL LALT(KC_F4) -#define BWORD LCTL(KC_LEFT) -#define FWORD LCTL(KC_RIGHT) +void matrix_scan_user(void) { + LEADER_DICTIONARY() { + leader_succeed = leading = false; + leader_layer_game = false; + leader_layer_def = false; -float onsong[][2] = SONG(MARIO_MUSHROOM); -float offsong[][2] = SONG(PLOVER_GOODBYE_SOUND); - -enum custom_keycodes { - PWD = SAFE_RANGE, - MAIL, - GAMEON, - GAMEOFF -}; - -bool process_record_user(uint16_t keycode, keyrecord_t *record) { - switch (keycode) { - case PWD: - if (record->event.pressed) { - SEND_STRING(pwd_str); - } - break; - case MAIL: - if (record->event.pressed) { - SEND_STRING(mail_str); - } - break; - case GAMEON: - if (record->event.pressed) { - #ifdef AUDIO_ENABLE - PLAY_SONG(onsong); - #endif - layer_on(_GAME); - } - break; - case GAMEOFF: - if (record->event.pressed) { - #ifdef AUDIO_ENABLE - PLAY_SONG(offsong); - #endif - layer_off(_GAME); - } - break; + SEQ_TWO_KEYS(KC_P, KC_P) { + SEND_STRING(pwd_str); + leader_succeed = true; + } + SEQ_TWO_KEYS(KC_P, KC_M) { + SEND_STRING(mail_str); + leader_succeed = true; + } + SEQ_TWO_KEYS(KC_B, KC_B) { + SEND_STRING("build"SS_TAP(X_ENTER)); + leader_succeed = true; + } + SEQ_TWO_KEYS(KC_B, KC_F) { + SEND_STRING("flash"SS_TAP(X_ENTER)); + reset_keyboard(); + leader_succeed = true; + } + SEQ_TWO_KEYS(KC_L, KC_G) { + layer_on(_GAME); + leader_layer_game = true; + } + SEQ_TWO_KEYS(KC_L, KC_D) { + layer_off(_GAME); + leader_layer_def = true; + } + leader_end(); } - return true; +} + +void leader_end(void) { + if (leader_succeed) { + // do nothing + } else if (leader_layer_game) { + #ifdef AUDIO_ENABLE + PLAY_SONG(gamesong); + #endif + } else if (leader_layer_def) { + #ifdef AUDIO_ENABLE + PLAY_SONG(defsong); + #endif + } else { + #ifdef AUDIO_ENABLE + PLAY_SONG(failed); + #endif + } +} + +// tap dance definitions +typedef struct { + bool is_press_action; + int state; +} tap; + +enum { + SINGLE_TAP = 1, + SINGLE_HOLD = 2, + DOUBLE_TAP = 3, + DOUBLE_HOLD = 4, + DOUBLE_SINGLE_TAP = 5, + TRIPLE_TAP = 6, + TRIPLE_HOLD = 7 }; +enum { + TD_LSFT = 0, + TD_LCTL, + TD_RSFT, + TD_RCTL +}; + +int cur_dance (qk_tap_dance_state_t *state); +void lsft_finished (qk_tap_dance_state_t *state, void *user_data); +void lsft_reset (qk_tap_dance_state_t *state, void *user_data); +void rsft_finished (qk_tap_dance_state_t *state, void *user_data); +void rsft_reset (qk_tap_dance_state_t *state, void *user_data); +void lctl_finished (qk_tap_dance_state_t *state, void *user_data); +void lctl_reset (qk_tap_dance_state_t *state, void *user_data); +void rctl_finished (qk_tap_dance_state_t *state, void *user_data); +void rctl_reset (qk_tap_dance_state_t *state, void *user_data); + +// layer declarations const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { /* Default * ,-----------------------------------------------------------------------------------. - * | Tab | Q | W | E | R | T | Y | U | I | O | P | BkSp | + * | Tab | Q | W | E | R | T | Y | U | I | O | Å | BkSp | * |------+------+------+------+------+-------------+------+------+------+------+------| * | Esc | A | S | D | F | G | H | J | K | L | Ø | Æ | * |------+------+------+------+------+------+------+------+------+------+------+------| - * | Shift| Z | X | C | V | B | N | M | , | . | Å | Shift| + * | Shift| Z | X | C | V | B | N | M | P | , | . | Shift| * |------+------+------+------+------+------+------+------+------+------+------+------| - * | Ctrl | Win | Alt | Lower| Space | Enter | Raise| AltGr| Game | Fn | + * | Ctrl | Lead | Win | Alt | Lower| Space| Enter| Raise| AltGr| App | Lead | Ctrl | * `-----------------------------------------------------------------------------------' */ [_DEFAULT] = LAYOUT_planck_grid( - KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC, - KC_GESC, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, NO_OE, NO_AE, - KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, NO_AA, KC_RSFT, - KC_LCTL, KC_LGUI, KC_LALT, LOWER, KC_NO, KC_SPC, KC_NO, KC_ENT, RAISE, KC_RALT, GAMEON, FUNCTION + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, NO_AA, KC_BSPC, + KC_ESC, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, NO_OE, NO_AE, + TD(TD_LSFT), KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_P, KC_COMM, KC_DOT, TD(TD_RSFT), + TD(TD_LCTL), KC_LEAD, KC_LGUI, KC_LALT, MO(_LOWER), KC_SPC, KC_ENT, MO(_RAISE), KC_ALGR, KC_APP, KC_LEAD, TD(TD_RCTL) ), /* Lower * ,-----------------------------------------------------------------------------------. @@ -116,81 +143,250 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { * |------+------+------+------+------+------|------+------+------+------+------+------| * | Shift| Home | | End | | | | | F1 | F2 | F3 | Shift| * |------+------+------+------+------+------+------+------+------+------+------+------| - * | Ctrl | Win | Alt | Lower| Space | Enter | | | | | + * | Ctrl | | Win | Alt | Lower| M_PP |M_Next| | | Mute | VolD | VolUp| * `-----------------------------------------------------------------------------------' */ [_LOWER] = LAYOUT_planck_grid( - KC_TRNS, BWORD, KC_UP, FWORD, KC_PGUP, KC_NO, KC_NO, KC_NO, KC_F7, KC_F8, KC_F9, KC_DEL, - KC_BSPC, KC_LEFT, KC_DOWN, KC_RIGHT, KC_PGDN, KC_NO, KC_NO, KC_NO, KC_F4, KC_F5, KC_F6, KC_NO, - KC_TRNS, KC_HOME, KC_NO, KC_END, KC_NO, KC_NO, KC_NO, KC_NO, KC_F1, KC_F2, KC_F3, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_NO, KC_TRNS, KC_NO, KC_TRNS, KC_NO, KC_NO, KC_NO, KC_NO + KC_TRNS, LCTL(KC_LEFT), KC_UP, LCTL(KC_RIGHT), KC_PGUP, KC_NO, KC_NO, KC_NO, KC_F7, KC_F8, KC_F9, KC_DEL, + KC_BSPC, KC_LEFT, KC_DOWN, KC_RIGHT, KC_PGDN, KC_NO, KC_NO, KC_NO, KC_F4, KC_F5, KC_F6, KC_NO, + KC_TRNS, KC_HOME, KC_NO, KC_END, KC_NO, KC_NO, KC_NO, KC_NO, KC_F1, KC_F2, KC_F3, KC_TRNS, + KC_TRNS, KC_NO, KC_TRNS, KC_TRNS, KC_TRNS, KC_MPLY, KC_MNXT, KC_NO, KC_NO, KC_MUTE, KC_VOLD, KC_VOLU ), /* Raise * ,-----------------------------------------------------------------------------------. - * | Tab | ! | ? | ' | " | ¨ | | / | 7 | 8 | 9 | Ins | + * | Tab | ! | ? | # | * | | | = | / | 7 | 8 | 9 | Ins | * |------+------+------+------+------+-------------+------+------+------+------+------| - * | BkSp | @ | & | # | $ | % | <> | \ | 4 | 5 | 6 | * | + * | BkSp | @ | & | $ | % | ~ | + | \ | 4 | 5 | 6 | | * |------+------+------+------+------+------+------+------+------+------+------+------| - * | Shift| ( | ) | { | } | [ | ] | 0 | 1 | 2 | 3 | Shift| + * | Shift| ' | " | ¨ | | | - | 0 | 1 | 2 | 3 | Shift| * |------+------+------+------+------+------+------+------+------+------+------+------| - * | Ctrl | Win | Alt | | Space | Enter | Raise| - | + | = | + * | Ctrl | | Win | Alt | | Space| Enter| Raise| AltGr| | | | * `-----------------------------------------------------------------------------------' */ [_RAISE] = LAYOUT_planck_grid( - KC_TRNS, NO_EXCL, NO_QEST, NO_APOS, NO_QUOT, NO_UMLA, KC_NO, NO_FSLS, KC_7, KC_8, KC_9, KC_INS, - KC_BSPC, NO_ALFA, NO_AMPE, NO_HASH, NO_USDO, NO_PERC, NO_ANBR, NO_BSLS, KC_4, KC_5, KC_6, NO_ASTE, - KC_TRNS, NO_LPAR, NO_RPAR, NO_LBRA, NO_RBRA, NO_LBRC, NO_RBRC, KC_0, KC_1, KC_2, KC_3, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_NO, KC_NO, KC_TRNS, KC_NO, KC_TRNS, KC_TRNS, NO_DASH, NO_PLUS, NO_EQUA - ), - /* Function - * ,-----------------------------------------------------------------------------------. - * | | | | | |TskMgr| | | | | Pwd | Vol+ | - * |------+------+------+------+------+-------------+------+------+------+------+------| - * | Reset| | | | | | | | Wkill| | | Vol- | - * |------+------+------+------+------+------+------+------+------+------+------+------| - * | | | | | | | | Mail | | | | VolM | - * |------+------+------+------+------+------+------+------+------+------+------+------| - * | | | | | Play/Pause | Next | | | | | - * `-----------------------------------------------------------------------------------' - */ - [_FUNCTION] = LAYOUT_planck_grid( - KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, TSKMGR, KC_NO, KC_NO, KC_NO, KC_NO, PWD, KC_VOLU, - RESET, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, WKILL, KC_NO, KC_NO, KC_VOLD, - KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, MAIL, KC_NO, KC_NO, KC_NO, KC_MUTE, - KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_MPLY, KC_NO, KC_MNXT, KC_NO, KC_NO, KC_NO, KC_NO + KC_TRNS, NO_EXCL, NO_QEST, NO_HASH, NO_ASTE, NO_PIPE, NO_EQUA, NO_FSLS, KC_7, KC_8, KC_9, KC_INS, + KC_BSPC, NO_ALFA, NO_AMPE, NO_USDO, NO_PERC, NO_TILD, NO_PLUS, NO_BSLS, KC_4, KC_5, KC_6, KC_NO, + KC_TRNS, NO_APOS, NO_QUOT, NO_UMLA, KC_NO, KC_NO, NO_DASH, KC_0, KC_1, KC_2, KC_3, KC_TRNS, + KC_TRNS, KC_NO, KC_TRNS, KC_TRNS, KC_NO, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_NO, KC_NO, KC_NO ), /* Game * ,-----------------------------------------------------------------------------------. - * | Tab | Q | W | E | R | T | Y | U | I | O | P | BkSp | + * | Tab | Q | W | E | R | T | Y | U | I | O | | BkSp | * |------+------+------+------+------+-------------+------+------+------+------+------| * | Esc | A | S | D | F | G | H | J | K | L | | | * |------+------+------+------+------+------+------+------+------+------+------+------| - * | Shift| Z | X | C | V | B | N | M | | | | | + * | Shift| Z | X | C | V | B | N | M | P | , | . | | * |------+------+------+------+------+------+------+------+------+------+------+------| - * | Ctrl | | Alt | Raise| Space | Enter | | | | | + * | Ctrl | Lead | | Alt | Lower| Space| Enter| Lower| | | Lead | | * `-----------------------------------------------------------------------------------' */ [_GAME] = LAYOUT_planck_grid( - KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC, - KC_ESC, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_NO, KC_NO, - KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_NO, KC_NO, KC_NO, KC_NO, - KC_LCTL, KC_NO, KC_LALT, GAMER, KC_NO, KC_SPC, KC_NO, KC_ENT, KC_NO, KC_NO, KC_NO, KC_NO + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_NO, KC_BSPC, + KC_ESC, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_NO, KC_NO, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_P, KC_COMM, KC_DOT, KC_NO, + KC_LCTL, KC_LEAD, KC_NO, KC_LALT, MO(_GLOW), KC_SPC, KC_ENT, MO(_GLOW), KC_NO, KC_NO, KC_LEAD, KC_NO ), - /* Game raise + /* Game lower * ,-----------------------------------------------------------------------------------. - * | Tab | 1 | 2 | 3 | 4 | 5 | | | | | | Vol+ | + * | Tab | 1 | 2 | 3 | | | | | | | | Steam| * |------+------+------+------+------+-------------+------+------+------+------+------| - * | Esc | F1 | F2 | F3 | F4 | F5 | | | | | | Vol- | + * | Esc | 4 | 5 | 6 | | | | | | | | F12 | * |------+------+------+------+------+------+------+------+------+------+------+------| - * | Shift| | | | | | | | | | | VolM | + * | Shift| 7 | 8 | 9 | 0 | | | | | | | | * |------+------+------+------+------+------+------+------+------+------+------+------| - * | Ctrl | | Alt | | Space | Enter | | | Def | Steam| + * | Ctrl | | | Alt | | PlyPa| Next | | | Mute | VolD | VolUp| * `-----------------------------------------------------------------------------------' */ - [_GAMERAISE] = LAYOUT_planck_grid( - KC_TRNS, KC_1, KC_2, KC_3, KC_4, KC_5, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_VOLU, - KC_TRNS, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_VOLD, - KC_TRNS, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_MUTE, - KC_TRNS, KC_NO, KC_TRNS, KC_TRNS, KC_NO, KC_TRNS, KC_NO, KC_TRNS, KC_NO, KC_NO, GAMEOFF, STEAM + [_GLOW] = LAYOUT_planck_grid( + KC_TRNS, KC_1, KC_2, KC_3, KC_PPLS, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, LSFT(KC_F7), + KC_TRNS, KC_4, KC_5, KC_6, KC_PMNS, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_F12, + KC_TRNS, KC_7, KC_8, KC_9, KC_0, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_MUTE, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_MPLY, KC_MNXT, KC_NO, KC_TRNS, KC_MUTE, KC_VOLD, KC_VOLU ) }; + +// tap dance declarations +int cur_dance (qk_tap_dance_state_t *state) { + if (state->count == 1) { + if (state->interrupted || !state->pressed) return SINGLE_TAP; + else return SINGLE_HOLD; + } + else if (state->count == 2) { + if (state->interrupted) return DOUBLE_SINGLE_TAP; + else if (state->pressed) return DOUBLE_HOLD; + else return DOUBLE_TAP; + } + if (state->count == 3) { + if (state->interrupted || !state->pressed) return TRIPLE_TAP; + else return TRIPLE_HOLD; + } + else return 8; +} + +static tap xtap_state = { + .is_press_action = true, + .state = 0 +}; + +void lsft_finished (qk_tap_dance_state_t *state, void *user_data) { + xtap_state.state = cur_dance(state); + switch (xtap_state.state) { + case SINGLE_TAP: + register_code16(LSFT(KC_8)); + break; + case SINGLE_HOLD: + register_code(KC_LSFT); + break; + case DOUBLE_TAP: + register_code(KC_NUBS); + break; + case DOUBLE_SINGLE_TAP: + register_code(KC_NUBS); + break; + } +} + +void lsft_reset (qk_tap_dance_state_t *state, void *user_data) { + switch (xtap_state.state) { + case SINGLE_TAP: + unregister_code16(LSFT(KC_8)); + break; + case SINGLE_HOLD: + unregister_code(KC_LSFT); + break; + case DOUBLE_TAP: + unregister_code(KC_NUBS); + break; + case DOUBLE_SINGLE_TAP: + unregister_code(KC_NUBS); + break; + } + xtap_state.state = 0; +} + +void rsft_finished (qk_tap_dance_state_t *state, void *user_data) { + xtap_state.state = cur_dance(state); + switch (xtap_state.state) { + case SINGLE_TAP: + register_code16(LSFT(KC_9)); + break; + case SINGLE_HOLD: + register_code(KC_RSFT); + break; + case DOUBLE_TAP: + register_code16(LSFT(KC_NUBS)); + break; + case DOUBLE_SINGLE_TAP: + register_code16(LSFT(KC_NUBS)); + break; + } +} + +void rsft_reset (qk_tap_dance_state_t *state, void *user_data) { + switch (xtap_state.state) { + case SINGLE_TAP: + unregister_code16(LSFT(KC_9)); + break; + case SINGLE_HOLD: + unregister_code(KC_RSFT); + break; + case DOUBLE_TAP: + unregister_code16(LSFT(KC_NUBS)); + break; + case DOUBLE_SINGLE_TAP: + unregister_code16(LSFT(KC_NUBS)); + break; + } + xtap_state.state = 0; +} + +void lctl_finished (qk_tap_dance_state_t *state, void *user_data) { + xtap_state.state = cur_dance(state); + switch (xtap_state.state) { + case SINGLE_TAP: + register_mods(MOD_BIT(KC_ALGR)); + register_code(KC_7); + break; + case SINGLE_HOLD: + register_code(KC_LCTL); + break; + case DOUBLE_TAP: + register_mods(MOD_BIT(KC_ALGR)); + register_code(KC_8); + break; + case DOUBLE_SINGLE_TAP: + register_mods(MOD_BIT(KC_ALGR)); + register_code(KC_8); +break; + } +} + +void lctl_reset (qk_tap_dance_state_t *state, void *user_data) { + switch (xtap_state.state) { + case SINGLE_TAP: + unregister_code(KC_7); + unregister_mods(MOD_BIT(KC_ALGR)); + break; + case SINGLE_HOLD: + unregister_code(KC_LCTL); + break; + case DOUBLE_TAP: + unregister_code(KC_8); + unregister_mods(MOD_BIT(KC_ALGR)); + break; + case DOUBLE_SINGLE_TAP: + unregister_code(KC_8); + unregister_mods(MOD_BIT(KC_ALGR)); +break; + } + xtap_state.state = 0; +} + +void rctl_finished (qk_tap_dance_state_t *state, void *user_data) { + xtap_state.state = cur_dance(state); + switch (xtap_state.state) { + case SINGLE_TAP: + register_mods(MOD_BIT(KC_ALGR)); + register_code(KC_0); + break; + case SINGLE_HOLD: + register_code(KC_RCTL); + break; + case DOUBLE_TAP: + register_mods(MOD_BIT(KC_ALGR)); + register_code(KC_9); + break; + case DOUBLE_SINGLE_TAP: + register_mods(MOD_BIT(KC_ALGR)); + register_code(KC_9); + break; + } +} + +void rctl_reset (qk_tap_dance_state_t *state, void *user_data) { + switch (xtap_state.state) { + case SINGLE_TAP: + unregister_code(KC_0); + unregister_mods(MOD_BIT(KC_ALGR)); + break; + case SINGLE_HOLD: + unregister_code(KC_RCTL); + break; + case DOUBLE_TAP: + unregister_code(KC_9); + unregister_mods(MOD_BIT(KC_ALGR)); + break; + case DOUBLE_SINGLE_TAP: + unregister_code(KC_9); + unregister_mods(MOD_BIT(KC_ALGR)); + break; + } + xtap_state.state = 0; +} + +qk_tap_dance_action_t tap_dance_actions[] = { + [TD_LSFT] = ACTION_TAP_DANCE_FN_ADVANCED(NULL, lsft_finished, lsft_reset), + [TD_RSFT] = ACTION_TAP_DANCE_FN_ADVANCED(NULL, rsft_finished, rsft_reset), + [TD_LCTL] = ACTION_TAP_DANCE_FN_ADVANCED(NULL, lctl_finished, lctl_reset), + [TD_RCTL] = ACTION_TAP_DANCE_FN_ADVANCED(NULL, rctl_finished, rctl_reset), +}; diff --git a/keyboards/planck/keymaps/oeywil/no_keycodes.h b/keyboards/planck/keymaps/oeywil/no_keycodes.h new file mode 100644 index 00000000000..c412c35d81b --- /dev/null +++ b/keyboards/planck/keymaps/oeywil/no_keycodes.h @@ -0,0 +1,28 @@ +// øæå +#define NO_OE KC_SCLN +#define NO_AE KC_QUOT +#define NO_AA KC_LBRC +// rename +#define NO_ANBR KC_NUBS +#define NO_APOS KC_BSLS +#define NO_BSLS KC_EQL +#define NO_DASH KC_SLSH +#define NO_PLUS KC_MINS +#define NO_UMLA KC_RBRC +#define NO_PIPE KC_GRV +// shifted +#define NO_EXCL LSFT(KC_1) +#define NO_QUOT LSFT(KC_2) +#define NO_HASH LSFT(KC_3) +#define NO_PERC LSFT(KC_5) +#define NO_AMPE LSFT(KC_6) +#define NO_FSLS LSFT(KC_7) +#define NO_LPAR LSFT(KC_8) +#define NO_RPAR LSFT(KC_9) +#define NO_EQUA LSFT(KC_0) +#define NO_QEST LSFT(KC_MINS) +#define NO_ASTE LSFT(KC_BSLS) +// altgr +#define NO_ALFA ALGR(KC_2) +#define NO_USDO ALGR(KC_4) +#define NO_TILD ALGR(KC_RBRC) diff --git a/keyboards/planck/keymaps/oeywil/readme.md b/keyboards/planck/keymaps/oeywil/readme.md index e9e061be3a8..5587b4b913d 100644 --- a/keyboards/planck/keymaps/oeywil/readme.md +++ b/keyboards/planck/keymaps/oeywil/readme.md @@ -1,9 +1,4 @@ About ------ -A simple Norwegian Layout. - -Layout -------- - -![Layout](https://i.imgur.com/GQ4iM6B.png "Keyboard Layout") +A simple Norwegian grid layout using Leader Key, Space Cadet Shift and audio. diff --git a/keyboards/planck/keymaps/oeywil/rules.mk b/keyboards/planck/keymaps/oeywil/rules.mk index a0373a4d4e5..23b2611735b 100644 --- a/keyboards/planck/keymaps/oeywil/rules.mk +++ b/keyboards/planck/keymaps/oeywil/rules.mk @@ -1,9 +1,11 @@ SRC += muse.c # Build Options -AUDIO_ENABLE = yes -CONSOLE_ENABLE = no -EXTRAKEY_ENABLE = yes -NKRO_ENABLE = yes - -DEFAULT_FOLDER = planck/rev6 +NKRO_ENABLE = yes +EXTRAKEY_ENABLE = yes +LEADER_ENABLE = yes +TAP_DANCE_ENABLE = yes +AUDIO_ENABLE = yes +COMMAND_ENABLE = no +CONSOLE_ENABLE = no +MOUSEKEY_ENABLE = no From 01f4b67ef03e0fe403ae6a17defe23bed6ec6e55 Mon Sep 17 00:00:00 2001 From: kingwangwong <31333140+kingwangwong@users.noreply.github.com> Date: Wed, 17 Apr 2019 15:26:20 -0500 Subject: [PATCH 122/171] [keymap] adding kingwangwong's keymaps (#5626) * Add files via upload * kingwangwong * kingwangwong * revisions and adding atom40 * revisions for 5626 * revisions for 5626 * revisions for 5626. * revisions for 5626, re added safe range * revisions for 5626, added qmkkeyboard * revisions for 5626, quefrency --- .../kbd75/keymaps/kingwangwong/keymap.c | 145 ++++++++++++++++++ .../quefrency/keymaps/kingwangwong/config.h | 31 ++++ .../quefrency/keymaps/kingwangwong/keymap.c | 40 +++++ 3 files changed, 216 insertions(+) create mode 100644 keyboards/kbdfans/kbd75/keymaps/kingwangwong/keymap.c create mode 100644 keyboards/keebio/quefrency/keymaps/kingwangwong/config.h create mode 100644 keyboards/keebio/quefrency/keymaps/kingwangwong/keymap.c diff --git a/keyboards/kbdfans/kbd75/keymaps/kingwangwong/keymap.c b/keyboards/kbdfans/kbd75/keymaps/kingwangwong/keymap.c new file mode 100644 index 00000000000..fb074e12104 --- /dev/null +++ b/keyboards/kbdfans/kbd75/keymaps/kingwangwong/keymap.c @@ -0,0 +1,145 @@ +#include QMK_KEYBOARD_H + +enum layer_names { + _QW, + _FO, + _FL, + _CL, + _DL +}; + + + + +// Custom macros +#define SPC_FUN LT(_FL, KC_SPC) +#define BSC_CON LT(_CL, KC_BSPC) + + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + /* 0: Qwerty layer + * ┌─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┐ + * │ ESC │ F1 │ F2 │ F3 │ F4 │ F5 │ F6 │ F7 │ F8 │ F9 │ F10 │ F11 │ F12 │PRSCR│ INS │HOME │ + * ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤ + * │ ` │ 1 │ 2 │ 3 │ 4 │ 5 │ 6 │ 7 │ 8 │ 9 │ 0 │ - │ = │BSLS │ DEL │ END │ + * ├─────┴──┬──┴──┬──┴──┬──┴──┬──┴──┬──┴──┬──┴──┬──┴──┬──┴──┬──┴──┬──┴──┬──┴──┬──┴──┬──┴─────┼─────┤ + * │TAB │ Q │ W │ E │ R │ T │ Y │ U │ I │ O │ P │ [ │ ] │BSPC │PGUP │ + * ├────────┴┬────┴┬────┴┬────┴┬────┴┬────┴┬────┴┬────┴┬────┴┬────┴┬────┴┬────┴┬────┴────────┼─────┤ + * │CAPS │ A │ S │ D │ F │ G │ H │ J │ K │ L │ ; │ ' │ENTER │PGDN │ + * ├──────┬──┴──┬──┴──┬──┴──┬──┴──┬──┴──┬──┴──┬──┴──┬──┴──┬──┴──┬──┴──┬──┴──┬──┴───────┬─────┼─────┤ + * │LSHFT │LSHFT│ Z │ X │ C │ V │ B │ N │ M │ , │ . │ / │RSHFT │ UP │MO_CL│ + * ├──────┼─────┴─┬───┴──┬──┴─────┴────┬┴─────┼─────┴─────┴────┬┴────┬┴────┬┴────┬─────┼─────┼─────┤ + * │LCTRL │L_GUI │L_ALT │SPC │MO(_FL│BSPC │R_ALT│R_GUI│R_CTR│LEFT │DOWN │RIGHT│ + * └──────┴───────┴──────┴─────────────┴──────┴────────────────┴─────┴─────┴─────┴─────┴─────┴─────┘ + */ + + /* 0: QWERTY */ + [_QW] = LAYOUT( + KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR, KC_INS, KC_HOME, + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSLS, KC_DEL, KC_END, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSPC, KC_PGUP, + KC_CLCK, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_PGDN, + KC_LSFT, KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, MO(_CL), + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, MO(_FL), KC_BSPC, KC_RALT, KC_RGUI, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT), + + /* 1: forty: this layer emulates a forty percent keyboard so I can transition to a forty percent :) + * ┌─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┐ + * │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ + * ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤ + * │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ + * ├─────┴──┬──┴──┬──┴──┬──┴──┬──┴──┬──┴──┬──┴──┬──┴──┬──┴──┬──┴──┬──┴──┬──┴──┬──┴──┬──┴─────┼─────┤ + * │ESC │ Q │ W │ E │ R │ T │ Y │ U │ I │ O │ P │ENT │ │ │ │ + * ├────────┴┬────┴┬────┴┬────┴┬────┴┬────┴┬────┴┬────┴┬────┴┬────┴┬────┴┬────┴┬────┴────────┼─────┤ + * │TAB │ A │ S │ D │ F │ G │ H │ J │ K │ L │ ; │ ' │ │ │ + * ├──────┬──┴──┬──┴──┬──┴──┬──┴──┬──┴──┬──┴──┬──┴──┬──┴──┬──┴──┬──┴──┬──┴──┬──┴───────┬─────┼─────┤ + * │LSHFT │LSHFT│ Z │ X │ C │ V │ B │ N │ M │ , │ . │ / │RSHFT │ │MO_CL│ + * ├──────┼─────┴─┬───┴──┬──┴─────┴────┬┴─────┼─────┴─────┴────┬┴────┬┴────┬┴────┬─────┼─────┼─────┤ + * │LCTRL │L_ALT │MO(DL)│SPCFUN │BSPC │MO(_CL) │R_ALT│R_GUI│R_CTR│ │ │ │ + * └──────┴───────┴──────┴─────────────┴──────┴────────────────┴─────┴─────┴─────┴─────┴─────┴─────┘ + */ + + /* 1: FORTY */ + [_FO] = LAYOUT( + XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, + XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, + KC_ESC, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_ENT, XXXXXXX, XXXXXXX, XXXXXXX, + KC_TAB, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, XXXXXXX, XXXXXXX, + KC_LSFT, KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, XXXXXXX, MO(_CL), + KC_LCTL, KC_LALT, MO(_DL), SPC_FUN, KC_BSPC, MO(_CL), KC_RALT, KC_RGUI, KC_RCTL, XXXXXXX, XXXXXXX, XXXXXXX), + + + /* 2: Function layer + * ┌─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┐ + * │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ + * ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤ + * │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ + * ├─────┴──┬──┴──┬──┴──┬──┴──┬──┴──┬──┴──┬──┴──┬──┴──┬──┴──┬──┴──┬──┴──┬──┴──┬──┴──┬──┴─────┼─────┤ + * │ │ │HOME │ UP │END │ │ │ │ │ │ │ │ │ │VOLUP│ + * ├────────┴┬────┴┬────┴┬────┴┬────┴┬────┴┬────┴┬────┴┬────┴┬────┴┬────┴┬────┴┬────┴────────┼─────┤ + * │ │ │LEFT │DOWN │RIGHT│ │ │ │ │ │ │ │ │VOLDN│ + * ├──────┬──┴──┬──┴──┬──┴──┬──┴──┬──┴──┬──┴──┬──┴──┬──┴──┬──┴──┬──┴──┬──┴──┬──┴───────┬─────┼─────┤ + * │ │ │ │ │PGDN │PGUP │ │ │ │ │ │ │ │ │ │ + * ├──────┼─────┴─┬───┴──┬──┴─────┴────┬┴─────┼─────┴─────┴────┬┴────┬┴────┬┴────┬─────┼─────┼─────┤ + * │ │ │ │ │ │ │VOLDN│VOLUP│ │ │ │ │ + * └──────┴───────┴──────┴─────────────┴──────┴────────────────┴─────┴─────┴─────┴─────┴─────┴─────┘ + */ + + /* 2: ANSI Fn layer */ + [_FL] = LAYOUT( + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, KC_HOME, KC_UP, KC_END, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_VOLU, + _______, _______, KC_LEFT, KC_DOWN, KC_RGHT, _______, _______, _______, _______, _______, _______, _______, _______, KC_VOLD, + _______, _______, _______, KC_PGDN, KC_PGUP, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, KC_VOLD, KC_VOLU, _______, _______, _______, _______), + + /* 3: Control layer + * ┌─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┐ + * │RESET│QWERT│FORTY│ │ │ │ │ │ │ │ │ │ │ │ │ │ + * ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤ + * │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ + * ├─────┴──┬──┴──┬──┴──┬──┴──┬──┴──┬──┴──┬──┴──┬──┴──┬──┴──┬──┴──┬──┴──┬──┴──┬──┴──┬──┴─────┼─────┤ + * │ ` │ ! │ @ │ # │ $ │ % │ ^ │ & │ * │ ( │ ) │ DEL │ │ │ │ + * ├────────┴┬────┴┬────┴┬────┴┬────┴┬────┴┬────┴┬────┴┬────┴┬────┴┬────┴┬────┴┬────┴────────┼─────┤ + * │ │ 1 │ 2 │ 3 │ 4 │ 5 │ 6 │ 7 │ 8 │ 9 │ 0 │ \ │ │ │ + * ├──────┬──┴──┬──┴──┬──┴──┬──┴──┬──┴──┬──┴──┬──┴──┬──┴──┬──┴──┬──┴──┬──┴──┬──┴───────┬─────┼─────┤ + * │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ + * ├──────┼─────┴─┬───┴──┬──┴─────┴────┬┴─────┼─────┴─────┴────┬┴────┬┴────┬┴────┬─────┼─────┼─────┤ + * │ │ │ │ │ │ │ │ │ │ │ │ │ + * └──────┴───────┴──────┴─────────────┴──────┴────────────────┴─────┴─────┴─────┴─────┴─────┴─────┘ + */ + + /* 3: Control layer */ + [_CL] = LAYOUT( + RESET, TO(_QW), TO(_FO), _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, RGB_TOG, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, RGB_MOD, + KC_GRV, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_DEL, _______, _______, KC_VOLU, + _______, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_BSLS, _______, KC_VOLD, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, RGB_SAI, _______, + _______, _______, _______, _______, _______, _______, _______, RGB_VAD, RGB_VAI, RGB_HUD, RGB_SAD, RGB_HUI), + + /* 4: Another layer for ease + * ┌─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┐ + * │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ KC_MINS, KC_EQL, KC_LBRC, KC_RBRC, KC_BSLS, + * ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤ KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, KC_PIPE, + * │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ + * ├─────┴──┬──┴──┬──┴──┬──┴──┬──┴──┬──┴──┬──┴──┬──┴──┬──┴──┬──┴──┬──┴──┬──┴──┬──┴──┬──┴─────┼─────┤ + * │ │ │ │ │ │ │ │ _ │ + │ { │ } │ | │ │ │ │ + * ├────────┴┬────┴┬────┴┬────┴┬────┴┬────┴┬────┴┬────┴┬────┴┬────┴┬────┴┬────┴┬────┴────────┼─────┤ + * │ │ │ │ │ │ │ │ - │ = │ [ │ ] │ \ │ │ │ + * ├──────┬──┴──┬──┴──┬──┴──┬──┴──┬──┴──┬──┴──┬──┴──┬──┴──┬──┴──┬──┴──┬──┴──┬──┴───────┬─────┼─────┤ + * │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ + * ├──────┼─────┴─┬───┴──┬──┴─────┴────┬┴─────┼─────┴─────┴────┬┴────┬┴────┬┴────┬─────┼─────┼─────┤ + * │ │ │ │ │ │ │ │ │ │ │ │ │ + * └──────┴───────┴──────┴─────────────┴──────┴────────────────┴─────┴─────┴─────┴─────┴─────┴─────┘ + */ + + /* 3: D control layer */ + [_DL] = LAYOUT( + RESET, TO(_QW), TO(_FO), _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, RGB_TOG, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, RGB_MOD, + _______, _______, _______, _______, _______, _______, _______, KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, KC_PIPE, _______, _______, KC_VOLU, + _______, _______, _______, _______, _______, _______, _______, KC_MINS, KC_EQL, KC_LBRC, KC_RBRC, KC_BSLS, _______, KC_VOLD, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, RGB_SAI, _______, + _______, _______, _______, _______, _______, _______, _______, RGB_VAD, RGB_VAI, RGB_HUD, RGB_SAD, RGB_HUI) +}; diff --git a/keyboards/keebio/quefrency/keymaps/kingwangwong/config.h b/keyboards/keebio/quefrency/keymaps/kingwangwong/config.h new file mode 100644 index 00000000000..bf632842e9c --- /dev/null +++ b/keyboards/keebio/quefrency/keymaps/kingwangwong/config.h @@ -0,0 +1,31 @@ +/* +This is the c configuration file for the keymap + +Copyright 2012 Jun Wako +Copyright 2015 Jack Humbert +Copyright 2018 Danny Nguyen + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#pragma once + +/* Use I2C or Serial, not both */ + +#define USE_SERIAL +//#define USE_I2C +#define USB_MAX_POWER_CONSUMPTION 50 + + +// #define USB_MAX_POWER_CONSUMPTION 100 diff --git a/keyboards/keebio/quefrency/keymaps/kingwangwong/keymap.c b/keyboards/keebio/quefrency/keymaps/kingwangwong/keymap.c new file mode 100644 index 00000000000..7bdc115ab97 --- /dev/null +++ b/keyboards/keebio/quefrency/keymaps/kingwangwong/keymap.c @@ -0,0 +1,40 @@ +#include QMK_KEYBOARD_H + +enum layer_names { + _BASE, + _FN1 +}; + + + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + /* + * ┌─────┬─────┬─────┬─────┬─────┬─────┬─────┐ ┌─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┐ + * │ESC │ 1 │ 2 │ 3 │ 4 │ 5 │ 6 │ │ 7 │ 8 │ 9 │ 0 │ - │ = │BSLS │ DEL │ + * ├─────┴──┬──┴──┬──┴──┬──┴──┬──┴──┬──┴──┬──┘ ┌──┴──┬──┴──┬──┴──┬──┴──┬──┴──┬──┴──┬──┴──┬──┴─────┤ + * │TAB │ Q │ W │ E │ R │ T │ │ Y │ U │ I │ O │ P │ [ │ ] │BSPC │ + * ├────────┴┬────┴┬────┴┬────┴┬────┴┬────┴┐ └┬────┴┬────┴┬────┴┬────┴┬────┴┬────┴┬────┴────────┤ + * │CAPS │ A │ S │ D │ F │ G │ │ H │ J │ K │ L │ ; │ ' │ENTER │ + * ├─────────┴──┬──┴──┬──┴──┬──┴──┬──┴──┬──┴──┐ └──┬──┴──┬──┴──┬──┴──┬──┴──┬──┴──┬──┴───────┬─────┤ + * │LSHFT │ Z │ X │ C │ V │ B │ │ N │ M │ , │ . │ / │RSHFT │ UP │ + * ├──────┬─────┴─┬───┴──┬──┴─────┴────┬┴─────┤ ├─────┴┬────┴────┬┴────┬┴────┬┴────┬─────┼─────┤ + * │LCTRL │L_GUI │L_ALT │SPC │FN1 │ │SPC │BSPC │R_ALT│R_CTR│LEFT │DOWN │RIGHT│ + * └──────┴───────┴──────┴─────────────┴──────┘ └──────┴─────────┴─────┴─────┴─────┴─────┴─────┘ + */ + [_BASE] = LAYOUT( + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSLS, KC_DEL, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSPC, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, MO(_FN1), KC_BSPC, KC_BSPC, KC_RALT, KC_RCTL, KC_LEFT, KC_RGHT, KC_DOWN + ), + + [_FN1] = LAYOUT( + KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, KC_BSPC, + _______, _______, KC_HOME, KC_UP, KC_END, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, KC_LEFT, KC_DOWN, KC_RGHT, _______, _______, KC_MINS, KC_EQL, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + RESET, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ + + ) +}; From 8bdbac14a36f8da5da3175006cff5eb3a3d60c1d Mon Sep 17 00:00:00 2001 From: roguepullrequest Date: Wed, 17 Apr 2019 20:39:50 -0500 Subject: [PATCH 123/171] [Keymap] Roguepullrequest Planck layout update (#5640) * First publish of roguepullreqest programmer dvorak planck layout * Removed junk line * Update keyboards/planck/keymaps/roguepullrequest/keymap.c Co-Authored-By: roguepullrequest * Update keyboards/planck/keymaps/roguepullrequest/keymap.c Co-Authored-By: roguepullrequest * Update keyboards/planck/keymaps/roguepullrequest/keymap.c Co-Authored-By: roguepullrequest * Update keyboards/planck/keymaps/roguepullrequest/keymap.c Co-Authored-By: roguepullrequest * Removed layer songs Removed layer songs for cleanliness. Will use them later. * Update keyboards/planck/keymaps/roguepullrequest/readme.md Co-Authored-By: roguepullrequest * Made basic LSHIFT framework but is not working. Listed other tapdances. * Got LSHIFT to work * Added working RSHIFT * Added working TD_S * Cleaned up LEFT and RIGHT [ { ] } on the UPPER layer. * Cleaned up layout. * Reenabled audio space is not needed right now. --- .../planck/keymaps/roguepullrequest/keymap.c | 87 ++++++++++++++++--- 1 file changed, 77 insertions(+), 10 deletions(-) diff --git a/keyboards/planck/keymaps/roguepullrequest/keymap.c b/keyboards/planck/keymaps/roguepullrequest/keymap.c index 64d9cfb2b7b..51c740dc4bc 100644 --- a/keyboards/planck/keymaps/roguepullrequest/keymap.c +++ b/keyboards/planck/keymaps/roguepullrequest/keymap.c @@ -24,14 +24,18 @@ enum { // Tap dance enums enum { X_AT_FUN = 0, - SH_M_LPAREN, - SH_M_RPAREN + RSHIFT, + LSHIFT, + TD_S }; int cur_dance (qk_tap_dance_state_t *state); void x_finished (qk_tap_dance_state_t *state, void *user_data); void x_reset (qk_tap_dance_state_t *state, void *user_data); +void lshift_finished (qk_tap_dance_state_t *state, void *user_data); +void lshift_reset(qk_tap_dance_state_t *state, void *user_data); + bool is_alt_tab_active = false; uint16_t alt_tab_timer = 0; @@ -102,17 +106,18 @@ void matrix_scan_user(void) { const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { -/* Programmer Dvorak */ + + /* Programmer Dvorak */ [_PDVORAK] = LAYOUT_planck_grid( - KC_GESC, KC_SCOLON, KC_COMMA, KC_DOT, KC_P, KC_Y, KC_F, KC_G, KC_C, KC_R, KC_L, KC_BSPC, - KC_LAST, KC_A, KC_O, KC_E, KC_U, KC_I, KC_D, KC_H, KC_T, KC_N, KC_S, KC_SLASH, - KC_LSPO, KC_QUOT, KC_Q, KC_J, KC_K, KC_X, KC_B, KC_M, KC_W, KC_V, KC_Z, KC_RSPC, - TD(X_AT_FUN), KC_LEFT, KC_DOWN, KC_UP, KC_RIGHT, ALT_TAB, KC_SPACE, KC_ENTER, MT(MOD_LCTL | MOD_LSFT, KC_LGUI), KC_PGUP, KC_PGDN, LT(_LOWER, KC_PLUS) + KC_GESC, KC_SCOLON, KC_COMMA, KC_DOT, KC_P, KC_Y, KC_F, KC_G, KC_C, KC_R, KC_L, KC_BSPC, + KC_LAST, KC_A, KC_O, KC_E, KC_U, KC_I, KC_D, KC_H, KC_T, KC_N, TD(TD_S), KC_SLASH, + TD(LSHIFT), KC_QUOT, KC_Q, KC_J, KC_K, KC_X, KC_B, KC_M, KC_W, KC_V, KC_Z, TD(RSHIFT), + TD(X_AT_FUN), KC_LEFT, KC_DOWN, KC_UP, KC_RIGHT, ALT_TAB, KC_SPACE, KC_ENTER, MT(MOD_LCTL | MOD_LSFT, KC_LGUI), KC_PGUP, KC_PGDN, LT(_LOWER, KC_PLUS) ), [_UPPER] = LAYOUT_planck_grid( - KC_GRAVE, KC_AMPR, KC_PERC, KC_LBRC, KC_LCBR, KC_EQL, KC_ASTR, KC_RCBR, KC_RBRC, KC_EXLM, KC_HASH, KC_TRNS, - KC_PLUS, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_MINUS, KC_BSLASH, + KC_GRAVE, KC_AMPR, KC_PERC, KC_NO, KC_NO, KC_EQL, KC_ASTR, KC_NO, KC_NO, KC_EXLM, KC_HASH, KC_TRNS, + KC_PLUS, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_BSLASH, KC_TRNS, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_TRNS, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_TRNS ), @@ -145,6 +150,10 @@ int cur_dance (qk_tap_dance_state_t *state) { if (state->interrupted || !state->pressed) return DOUBLE_TAP; else return DOUBLE_HOLD; } + else if (state->count == 3) { + if (state->interrupted || !state->pressed)return TRIPLE_TAP; + else return TRIPLE_HOLD; + } else return 8; // magic number that i dont believe works. } @@ -164,6 +173,35 @@ void x_finished (qk_tap_dance_state_t *state, void *user_data) { case DOUBLE_HOLD: reset_keyboard(); break; } } + +void lshift_finished (qk_tap_dance_state_t *state, void *user_data) { + xtap_state.state = cur_dance(state); + switch (xtap_state.state) { + case SINGLE_TAP: register_code16(KC_LSFT); register_code16(KC_9); break; + case SINGLE_HOLD: register_code16(KC_LSFT); break; + case DOUBLE_TAP: register_code16(KC_LBRC); break; + case TRIPLE_TAP: register_code16(KC_LSFT); register_code16(KC_LBRC); break; + } +} +void s_finished (qk_tap_dance_state_t *state, void *user_data) { + xtap_state.state = cur_dance(state); + switch (xtap_state.state) { + case SINGLE_TAP: register_code16(KC_S); break; + case DOUBLE_TAP: register_code16(KC_MINUS); break; + case TRIPLE_TAP: register_code16(KC_LSFT); register_code16(KC_MINUS); break; + } +} + +void rshift_finished (qk_tap_dance_state_t *state, void *user_data) { + xtap_state.state = cur_dance(state); + switch (xtap_state.state) { + case SINGLE_TAP: register_code16(KC_LSFT); register_code16(KC_0); break; + case SINGLE_HOLD: register_code16(KC_RSFT); break; + case DOUBLE_TAP: register_code16(KC_RBRC); break; + case TRIPLE_TAP: register_code16(KC_LSFT); register_code16(KC_RBRC); break; + } +} + // forgetting keypresses void x_reset (qk_tap_dance_state_t *state, void *user_data) { @@ -175,9 +213,38 @@ void x_reset (qk_tap_dance_state_t *state, void *user_data) { } xtap_state.state = 0; } +void lshift_reset (qk_tap_dance_state_t *state, void *user_data) { + switch (xtap_state.state) { + case SINGLE_TAP: unregister_code16(KC_9); unregister_code16(KC_LSFT); break; + case SINGLE_HOLD: unregister_code16(KC_LSFT); break; + case DOUBLE_TAP: unregister_code16(KC_LBRC); break; + case TRIPLE_TAP: unregister_code16(KC_LBRC); unregister_code16(KC_LSFT); break; + } + xtap_state.state = 0; +} +void rshift_reset (qk_tap_dance_state_t *state, void *user_data) { + switch (xtap_state.state) { + case SINGLE_TAP: unregister_code16(KC_0); unregister_code16(KC_LSFT); break; + case SINGLE_HOLD: unregister_code16(KC_RSFT); break; + case DOUBLE_TAP: unregister_code16(KC_RBRC); break; + case TRIPLE_TAP: unregister_code16(KC_RBRC); unregister_code16(KC_LSFT); break; + } + xtap_state.state = 0; +} +void s_reset (qk_tap_dance_state_t *state, void *user_data) { + switch (xtap_state.state) { + case SINGLE_TAP: unregister_code16(KC_S); break; + case DOUBLE_TAP: unregister_code16(KC_MINUS); break; + case TRIPLE_TAP: unregister_code16(KC_MINUS); unregister_code16(KC_LSFT); break; + } + xtap_state.state = 0; +} qk_tap_dance_action_t tap_dance_actions[] = { - [X_AT_FUN] = ACTION_TAP_DANCE_FN_ADVANCED(NULL, x_finished, x_reset) + [X_AT_FUN] = ACTION_TAP_DANCE_FN_ADVANCED(NULL, x_finished, x_reset), + [LSHIFT] = ACTION_TAP_DANCE_FN_ADVANCED(NULL, lshift_finished, lshift_reset), + [RSHIFT] = ACTION_TAP_DANCE_FN_ADVANCED(NULL, rshift_finished, rshift_reset), + [TD_S] = ACTION_TAP_DANCE_FN_ADVANCED(NULL, s_finished, s_reset), }; void shutdown_user(void) { clear_keyboard(); } From 34239edcb043fe03f8e547ea94bac7b8ff07657c Mon Sep 17 00:00:00 2001 From: Florian Didron Date: Thu, 18 Apr 2019 10:49:13 +0900 Subject: [PATCH 124/171] Set default debounce to 5 --- keyboards/ergodox_ez/config.h | 1 - 1 file changed, 1 deletion(-) diff --git a/keyboards/ergodox_ez/config.h b/keyboards/ergodox_ez/config.h index a75edd41544..cbf7f8aaa29 100644 --- a/keyboards/ergodox_ez/config.h +++ b/keyboards/ergodox_ez/config.h @@ -98,7 +98,6 @@ along with this program. If not, see . * 5, which is now closer to 10ms, but still plenty according to * manufacturer specs. */ -#define DEBOUNCE 10 #define USB_MAX_POWER_CONSUMPTION 500 From 3542f594d9d6f81edf1de3ead435d19803d83092 Mon Sep 17 00:00:00 2001 From: patrickmt <40182064+patrickmt@users.noreply.github.com> Date: Thu, 18 Apr 2019 09:35:50 -0400 Subject: [PATCH 125/171] Fix wake from suspend LED functionality When waking from suspend, only enable the LED drivers if they were not previously set to disabled by the user. This functionality was removed by the recent updates to adapt Massdrop keyboards to QMK RGB Matrix. Affects Massdrop CTRL and ALT keyboards compiled using Massdrop Configurator mode. --- tmk_core/common/arm_atsam/suspend.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/tmk_core/common/arm_atsam/suspend.c b/tmk_core/common/arm_atsam/suspend.c index 9c2c47d5610..ecf8f0ed189 100644 --- a/tmk_core/common/arm_atsam/suspend.c +++ b/tmk_core/common/arm_atsam/suspend.c @@ -78,7 +78,13 @@ void suspend_wakeup_init_kb(void) { */ void suspend_wakeup_init(void) { #ifdef RGB_MATRIX_ENABLE +#ifdef USE_MASSDROP_CONFIGURATOR + if (led_enabled) { + I2C3733_Control_Set(1); + } +#else I2C3733_Control_Set(1); +#endif #endif suspend_wakeup_init_kb(); From 162a1d39b6ece786d31b934db3fb1b5721c05568 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?=C3=98yvind=20Wilhelmsen?= <46304257+oeywil@users.noreply.github.com> Date: Thu, 18 Apr 2019 22:27:05 +0200 Subject: [PATCH 126/171] Update readme.md (#5647) --- keyboards/planck/keymaps/oeywil/readme.md | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/keyboards/planck/keymaps/oeywil/readme.md b/keyboards/planck/keymaps/oeywil/readme.md index 5587b4b913d..364f9422c71 100644 --- a/keyboards/planck/keymaps/oeywil/readme.md +++ b/keyboards/planck/keymaps/oeywil/readme.md @@ -1,4 +1,4 @@ About ------ -A simple Norwegian grid layout using Leader Key, Space Cadet Shift and audio. +A simple Norwegian grid layout using Leader Key, Tap Dance and audio. From a58c66df88d1da9c57e5e4ccffb78c7882b55706 Mon Sep 17 00:00:00 2001 From: Drashna Jaelre Date: Thu, 18 Apr 2019 14:02:32 -0700 Subject: [PATCH 127/171] Reduce CRKBD firmware size by reducing layer numbers (#5471) * Reduce CRKBD firmware size by reducing layer numbers * Update layer output code based on mtei's suggestion/code * Fix spacing * Revert "Update layer output code based on mtei's suggestion/code" This reverts commit 036d347db309170afd5676e694adfda69f912615. Unfortunately, because this is NOT in the keymap itself, the layer macros aren't accessible and will error on commit * Add comment for future person --- keyboards/crkbd/keymaps/default/keymap.c | 7 +++---- keyboards/crkbd/keymaps/omgvee/keymap.c | 7 +++---- keyboards/crkbd/keymaps/thefrey/keymap.c | 7 +++---- keyboards/crkbd/lib/layer_state_reader.c | 9 +++++---- 4 files changed, 14 insertions(+), 16 deletions(-) diff --git a/keyboards/crkbd/keymaps/default/keymap.c b/keyboards/crkbd/keymaps/default/keymap.c index 1e2e57a2b45..5bb89d2594a 100644 --- a/keyboards/crkbd/keymaps/default/keymap.c +++ b/keyboards/crkbd/keymaps/default/keymap.c @@ -22,9 +22,9 @@ extern uint8_t is_master; // Layer names don't all need to be of the same length, obviously, and you can also skip them // entirely and just use numbers. #define _QWERTY 0 -#define _LOWER 3 -#define _RAISE 4 -#define _ADJUST 16 +#define _LOWER 1 +#define _RAISE 2 +#define _ADJUST 3 enum custom_keycodes { QWERTY = SAFE_RANGE, @@ -246,4 +246,3 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) { } return true; } - diff --git a/keyboards/crkbd/keymaps/omgvee/keymap.c b/keyboards/crkbd/keymaps/omgvee/keymap.c index 2f79250f81d..2c33d8b8c57 100644 --- a/keyboards/crkbd/keymaps/omgvee/keymap.c +++ b/keyboards/crkbd/keymaps/omgvee/keymap.c @@ -22,9 +22,9 @@ extern uint8_t is_master; // Layer names don't all need to be of the same length, obviously, and you can also skip them // entirely and just use numbers. #define _QWERTY 0 -#define _LOWER 3 -#define _RAISE 4 -#define _ADJUST 16 +#define _LOWER 1 +#define _RAISE 2 +#define _ADJUST 3 enum custom_keycodes { QWERTY = SAFE_RANGE, @@ -240,4 +240,3 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) { } return true; } - diff --git a/keyboards/crkbd/keymaps/thefrey/keymap.c b/keyboards/crkbd/keymaps/thefrey/keymap.c index 5077bfc87cf..9a142a924ae 100644 --- a/keyboards/crkbd/keymaps/thefrey/keymap.c +++ b/keyboards/crkbd/keymaps/thefrey/keymap.c @@ -22,9 +22,9 @@ extern uint8_t is_master; // Layer names don't all need to be of the same length, obviously, and you can also skip them // entirely and just use numbers. #define _QWERTY 0 -#define _LOWER 3 -#define _RAISE 4 -#define _ADJUST 16 +#define _LOWER 1 +#define _RAISE 2 +#define _ADJUST 3 enum custom_keycodes { QWERTY = SAFE_RANGE, @@ -241,4 +241,3 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) { } return true; } - diff --git a/keyboards/crkbd/lib/layer_state_reader.c b/keyboards/crkbd/lib/layer_state_reader.c index eddb71337eb..63d80b136cc 100644 --- a/keyboards/crkbd/lib/layer_state_reader.c +++ b/keyboards/crkbd/lib/layer_state_reader.c @@ -3,11 +3,12 @@ #include #include "crkbd.h" +// in the future, should use (1U<<_LAYER_NAME) instead, but needs to be moved to keymap,c #define L_BASE 0 -#define L_LOWER 8 -#define L_RAISE 16 -#define L_ADJUST 65536 -#define L_ADJUST_TRI 65560 +#define L_LOWER 2 +#define L_RAISE 4 +#define L_ADJUST 8 +#define L_ADJUST_TRI 14 char layer_state_str[24]; From 9e3b38425feedbe8d95c6cb738d713cc6e15af56 Mon Sep 17 00:00:00 2001 From: YouCanFly <65446+YCF@users.noreply.github.com> Date: Thu, 18 Apr 2019 17:37:26 -0500 Subject: [PATCH 128/171] [Keyboard] Update Tetris (#5513) * Update Tetris Add a fake row to config the encoder's keycode easily. * Delete rules.mk * Update keyboards/tetris/readme.md Co-Authored-By: YCF <65446+YCF@users.noreply.github.com> * Update config.h add #define RGBLIGHT_SLEEP --- keyboards/tetris/config.h | 22 +- keyboards/tetris/info.json | 6 +- keyboards/tetris/keymaps/default/keymap.c | 954 ++++------------------ keyboards/tetris/keymaps/default/rules.mk | 1 - keyboards/tetris/readme.md | 4 +- keyboards/tetris/rules.mk | 13 +- keyboards/tetris/tetris.c | 2 +- keyboards/tetris/tetris.h | 8 +- 8 files changed, 184 insertions(+), 826 deletions(-) mode change 100644 => 100755 keyboards/tetris/config.h mode change 100644 => 100755 keyboards/tetris/keymaps/default/keymap.c delete mode 100644 keyboards/tetris/keymaps/default/rules.mk mode change 100644 => 100755 keyboards/tetris/rules.mk mode change 100644 => 100755 keyboards/tetris/tetris.c mode change 100644 => 100755 keyboards/tetris/tetris.h diff --git a/keyboards/tetris/config.h b/keyboards/tetris/config.h old mode 100644 new mode 100755 index 20ec2e655a7..2cc7d2951d9 --- a/keyboards/tetris/config.h +++ b/keyboards/tetris/config.h @@ -10,17 +10,12 @@ #define PRODUCT Tetris #define DESCRIPTION Planck mit -#define QMK_ESC_OUTPUT B0 -#define QMK_ESC_INPUT D7 -#define QMK_LED B7 -#define QMK_SPEAKER B5 - /* key matrix size */ -#define MATRIX_ROWS 4 +#define MATRIX_ROWS 5 #define MATRIX_COLS 12 /* key matrix pins */ -#define MATRIX_ROW_PINS { B3, B2, B1, B0 } +#define MATRIX_ROW_PINS { B3, B2, B1, B0, E6 } #define MATRIX_COL_PINS { D7, B4, B6, C6, C7, F6, F7, D4, D2, D3, D5, D6 } #define UNUSED_PINS @@ -39,19 +34,22 @@ #define NO_ACTION_MACRO #define NO_ACTION_FUNCTION -#define TAPPING_TERM 200 - #ifdef AUDIO_ENABLE #define B5_AUDIO #define STARTUP_SONG SONG(ONE_UP_SOUND) #define NO_MUSIC_MODE #endif -#if RGBLIGHT_ENABLE +#define NUMBER_OF_ENCODERS 2 +#define ENCODERS_PAD_A { D1,F1 } +#define ENCODERS_PAD_B { D0,F0 } + #define RGB_DI_PIN F5 #define RGBLIGHT_ANIMATIONS #define RGBLIGHT_SLEEP #define RGBLED_NUM 47 +#define RGBLIGHT_HUE_STEP 8 +#define RGBLIGHT_SAT_STEP 8 +#define RGBLIGHT_VAL_STEP 8 #define RGBLIGHT_EFFECT_KNIGHT_LED_NUM 12 -//#define RGBLIGHT_LIMIT_VAL 128 -#endif + diff --git a/keyboards/tetris/info.json b/keyboards/tetris/info.json index b21a46d632b..c58e9be52f4 100644 --- a/keyboards/tetris/info.json +++ b/keyboards/tetris/info.json @@ -3,10 +3,10 @@ "url": "", "maintainer": "qmk", "width": 12, - "height": 4, + "height": 5, "layouts": { "LAYOUT_planck_mit": { - "layout": [{"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":4, "y":0}, {"x":5, "y":0}, {"x":6, "y":0}, {"x":7, "y":0}, {"x":8, "y":0}, {"x":9, "y":0}, {"x":10, "y":0}, {"x":11, "y":0}, {"x":0, "y":1}, {"x":1, "y":1}, {"x":2, "y":1}, {"x":3, "y":1}, {"x":4, "y":1}, {"x":5, "y":1}, {"x":6, "y":1}, {"x":7, "y":1}, {"x":8, "y":1}, {"x":9, "y":1}, {"x":10, "y":1}, {"x":11, "y":1}, {"x":0, "y":2}, {"x":1, "y":2}, {"x":2, "y":2}, {"x":3, "y":2}, {"x":4, "y":2}, {"x":5, "y":2}, {"x":6, "y":2}, {"x":7, "y":2}, {"x":8, "y":2}, {"x":9, "y":2}, {"x":10, "y":2}, {"x":11, "y":2}, {"x":0, "y":3}, {"x":1, "y":3}, {"x":2, "y":3}, {"x":3, "y":3}, {"x":4, "y":3}, {"x":5, "y":3, "w":2}, {"x":7, "y":3}, {"x":8, "y":3}, {"x":9, "y":3}, {"x":10, "y":3}, {"x":11, "y":3}] + "layout": [{"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":4, "y":0}, {"x":5, "y":0}, {"x":6, "y":0}, {"x":7, "y":0}, {"x":8, "y":0}, {"x":9, "y":0}, {"x":10, "y":0}, {"x":11, "y":0}, {"x":0, "y":1}, {"x":1, "y":1}, {"x":2, "y":1}, {"x":3, "y":1}, {"x":4, "y":1}, {"x":5, "y":1}, {"x":6, "y":1}, {"x":7, "y":1}, {"x":8, "y":1}, {"x":9, "y":1}, {"x":10, "y":1}, {"x":11, "y":1}, {"x":0, "y":2}, {"x":1, "y":2}, {"x":2, "y":2}, {"x":3, "y":2}, {"x":4, "y":2}, {"x":5, "y":2}, {"x":6, "y":2}, {"x":7, "y":2}, {"x":8, "y":2}, {"x":9, "y":2}, {"x":10, "y":2}, {"x":11, "y":2}, {"x":0, "y":3}, {"x":1, "y":3}, {"x":2, "y":3}, {"x":3, "y":3}, {"x":4, "y":3}, {"x":5, "y":3, "w":2}, {"x":7, "y":3}, {"x":8, "y":3}, {"x":9, "y":3}, {"x":10, "y":3}, {"x":11, "y":3}, {"x":0, "y":4}, {"x":1, "y":4}, {"x":10, "y":4}, {"x":11, "y":4}] + } } - } } diff --git a/keyboards/tetris/keymaps/default/keymap.c b/keyboards/tetris/keymaps/default/keymap.c old mode 100644 new mode 100755 index 0ec12435e78..c1b5ad2b1f3 --- a/keyboards/tetris/keymaps/default/keymap.c +++ b/keyboards/tetris/keymaps/default/keymap.c @@ -1,828 +1,186 @@ #include QMK_KEYBOARD_H -#ifdef AUDIO_ENABLE - float tone_caps[][2] = SONG( CAPS_LOCK_ON_SOUND ); - float tone_taps[][2] = SONG( E__NOTE( _A6 ) ); -#endif - -#define _BASE 0 -#define _CODE 1 -#define _NAVI 2 -#define _FUNC 3 -#define _SYMB 4 -#define _NUMB 5 -#define _MARO 6 -#define _RGB 7 -#define _ADJUST 8 -#define _GAME 9 - -/* RGB colors */ -#define RGB_Layer_1_Base_Color 0, 128, 0 -#define RGB_Layer_2_Base_Color 0,0,0 -#define RGB_Layer_3_Base_Color 0,0,0 -#define RGB_Layer_4_Base_Color 0,0,0 -#define RGB_Layer_5_Base_Color 0,0,0 -#define RGB_Layer_6_Base_Color 64, 0, 64 -#define RGB_Layer_7_Base_Color 0, 0,0 -#define RGB_Layer_8_Base_Color 0,0,0 -#define RGB_Layer_9_Base_Color 0,0,0 -#define RGB_Caps_Color 6,50,50 -#define RGB_TAP_On_Color 0,128,0 -#define RGB_TAP_Off_Color 128,0,0 -#define RGB_TAP_Base_Color 0,0,0 - -extern rgblight_config_t rgblight_config; -bool NUMLAY_STATUS = false; -int RGB_LAYER0_mode = 6; -bool RGB_TAP_STATE = false; -static uint8_t current_layer = 0; -static bool has_layer_changed = true; -static bool save_rgbmode = true; -static bool caps = false; - -/* Tap Dance function */ -void dance_cln_finished( qk_tap_dance_state_t* state, void* user_data ) -{ - if ( state->count == 1 ) - { - register_code( KC_LSFT ); - } else { - layer_on( _SYMB ); - #ifdef AUDIO_ENABLE - PLAY_SONG( tone_taps ); - #endif - } -} - - -void dance_cln_reset( qk_tap_dance_state_t* state, void* user_data ) -{ - if ( state->count == 1 ) - { - unregister_code( KC_LSFT ); - }else { - uint8_t layer = biton32( layer_state ); - if ( layer == _SYMB ) - { - layer_off( _SYMB ); - rgblight_mode( RGB_LAYER0_mode ); - } - } -} - -enum my_keycodes { - RGB_TAP = SAFE_RANGE, - KC_00 -}; - -/* Tap Dance Declarations */ -enum { - TD_Mute_Next = 0, - TD_SFT, - TD_LBRC, - TD_RBRC -}; - -/* Tap Dance Definitions */ -qk_tap_dance_action_t tap_dance_actions[] = { - [TD_Mute_Next] = ACTION_TAP_DANCE_DOUBLE( KC_MUTE, KC_MNXT ) - ,[TD_SFT] = ACTION_TAP_DANCE_FN_ADVANCED( NULL, dance_cln_finished, dance_cln_reset ) - ,[TD_LBRC] = ACTION_TAP_DANCE_DOUBLE( KC_LBRC, KC_LCBR ) - ,[TD_RBRC] = ACTION_TAP_DANCE_DOUBLE( KC_RBRC, KC_RCBR ) -}; - - const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { -/* BASE - QWERTY - * ,-----------------------------------------------------------------------------------. - * | Tab | Q | W | E | R | T | Y | U | I | O | P | BS | - * |------+------+------+------+------+-------------+------+------+------+------+------| - * shift + Esc = ~ --> | Esc | A | S | D | F | G | H | J | K | L | ; | Enter| <-- shift + Enter = " - * |------+------+------+------+------+------|------+------+------+------+------+------| - * | Shift| Z | X | C | V | B | N | M | , | . | / | Mute | - * |------+------+------+------+------+------+------+------+------+------+------+------| <-- tap: 1.Mute 2.Next - * | Ctrl | GUI | Alt | [ | - | Space | = | ] | Fx | \ | Del | - * `-----------------------------------------------------------------------------------' - */ - -[_BASE] = LAYOUT_planck_mit( - LT( _ADJUST,KC_TAB), KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC, - LT( _NUMB,KC_ESC), KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, LT( _RGB, KC_L ), KC_SCLN, KC_ENT, - TD( TD_SFT ), KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_UP, TD( TD_Mute_Next ), - KC_LCTL, KC_LGUI, KC_LALT, TD( TD_LBRC ), LT( _NAVI, KC_MINS ), LT( _CODE, KC_SPC ), LT( _FUNC, KC_EQL ), TD( TD_RBRC ), KC_LEFT, KC_DOWN, KC_RGHT ), - -/* Code - * ,-----------------------------------------------------------------------------------. - * | | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | Bksp | - * |------+------+------+------+------+-------------+------+------+------+------+------| - * | ` | < | [ | { | ( | & | Left | Down | Up | Down | ; | ' | - * |------+------+------+------+------+------|------+------+------+------+------+------| - * | | > | ] | } | ) | | | | | , | . | / | Play | - * |------+------+------+------+------+------+------+------+------+------+------+------| - * | | | | [ | BkSp | ======= | Del | ] | | \ | | - * `-----------------------------------------------------------------------------------' - */ - -[_CODE] = LAYOUT_planck_mit( /* 1 - Code */ - _______, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, _______, - KC_GRV, KC_LABK, KC_LBRC, KC_LCBR, KC_LPRN, KC_AMPR, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT, _______, KC_QUOT, - _______, KC_RABK, KC_RBRC, KC_RCBR, KC_RPRN, KC_PIPE, XXXXXXX, XXXXXXX, _______, _______, KC_SLSH, KC_MPLY, - _______, _______, _______, KC_LBRC, KC_BSPC, _______, KC_DEL, KC_RBRC, _______, KC_BSLS, _______ ), - -/* Navi - * ,-----------------------------------------------------------------------------------. - * | | | | PgUp | | | | |Insert| |Prtsc | | - * |------+------+------+------+------+-------------+------+------+------+------+------| - * | ~ | | Home | PgDn | End | | | | |SrcLck| | | - * |------+------+------+------+------+------|------+------+------+------+------+------| - * | | | | | | Break| | | | | PgUp | | - * |------+------+------+------+------+------+------+------+------+------+------+------| - * | | | | | | | | | Home | PgDn | End | - * `-----------------------------------------------------------------------------------' - */ - -[_NAVI] = LAYOUT_planck_mit( - _______, XXXXXXX, XXXXXXX, KC_PGUP, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_INS, XXXXXXX, KC_PSCR, _______, - KC_TILD, XXXXXXX, KC_HOME, KC_PGDN, KC_END, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_SLCK, _______, _______, - _______, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_PAUS, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_PGUP, _______, - _______, _______, _______, _______, _______, _______, _______, _______, KC_HOME, KC_PGDN, KC_END ), - -/* Func - * ,-----------------------------------------------------------------------------------. - * | | F1 | F2 | F3 | F4 | F5 | F6 | F7 | F8 | F9 | F10 | | - * |------+------+------+------+------+-------------+------+------+------+------+------| - * | | F11 | F12 | | | | | | | | | | - * |------+------+------+------+------+------|------+------+------+------+------+------| - * | | | | | | | | | | | | | - * |------+------+------+------+------+------+------+------+------+------+------+------| - * | | | | | | | | | | | | - * `-----------------------------------------------------------------------------------' - */ - -[_FUNC] = LAYOUT_planck_mit( - _______ , KC_F1, KC_F2 , KC_F3, KC_F4, KC_F5, KC_F6 , KC_F7, KC_F8, KC_F9, KC_F10, _______, - _______ , KC_F12, KC_F12 , XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, _______, - _______ , XXXXXXX, XXXXXXX , XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, _______, - _______ , _______, _______ , _______, _______, _______, _______ , _______, _______, _______, _______ ), - - -/* Symb - double tap shift - * ,-----------------------------------------------------------------------------------. - * | | | ! | @ | # | $ | % | ^ | & | * | ( | ) | | - * |------+------+------+------+------+-------------+------+------+------+------+------| - * | | | | | | | | | | | : | " | - * |------+------+------+------+------+------|------+------+------+------+------+------| - * | | | | | | | | | < | > | ? | | - * |------+------+------+------+------+------+------+------+------+------+------+------| - * | | | | { | _ | | + | } | | | | - * `-----------------------------------------------------------------------------------' - */ - -[_SYMB] = LAYOUT_planck_mit( - KC_PIPE, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, _______, - KC_TILD, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_COLN, KC_DQUO, - _______, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_LABK, KC_RABK, KC_QUES, _______, - _______, _______, _______, KC_LCBR, KC_UNDS, _______, KC_PLUS, KC_RCBR, _______, KC_PIPE, _______ ), - -/* Number - * ,-----------------------------------------------------------------------------------. - * | | + | - | | | | | 7 | 8 | 9 | | | - * |------+------+------+------+------+-------------+------+------+------+------+------| - * | | * | / | = | | | | 4 | 5 | 6 | | | - * |------+------+------+------+------+------|------+------+------+------+------+------| - * | | | | | | | | 1 | 2 | 3 | |Layer0| - * |------+------+------+------+------+------+------+------+------+------+------+------| - * | | | | | | | 0 | 00 | . | | | - * `-----------------------------------------------------------------------------------' - */ - -[_NUMB] = LAYOUT_planck_mit( /* 5 - Numpad */ - _______, KC_PPLS, KC_PMNS, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_7, KC_8, KC_9, XXXXXXX, _______, - _______, KC_PAST, KC_PSLS, KC_EQL, XXXXXXX, XXXXXXX, XXXXXXX, KC_4, KC_5, KC_6, XXXXXXX, _______, - _______, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_1, KC_2, KC_3, XXXXXXX, TO( 0 ), - _______, _______, _______, _______, _______, XXXXXXX, KC_0, KC_00, KC_DOT, XXXXXXX, _______ ), - -/* MARO Empty - * ,-----------------------------------------------------------------------------------. - * | | | | | | | | | | | | | - * |------+------+------+------+------+-------------+------+------+------+------+------| - * | | | | | | | | | | | | | - * |------+------+------+------+------+------|------+------+------+------+------+------| - * | | | | | | | | | | | | | - * |------+------+------+------+------+------+------+------+------+------+------+------| - * | | | | | | | | | | | | - * `-----------------------------------------------------------------------------------' - */ - -[_MARO] = LAYOUT_planck_mit( - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ ), - -/* RGB - * ,-----------------------------------------------------------------------------------. - * | | | | | | _TAP | | | | | | | - * |------+------+------+------+------+-------------+------+------+------+------+------| - * | MOD | M_R | M_SW | M_K | M_X | M_G | | | | | | | - * |------+------+------+------+------+------|------+------+------+------+------+------| - * | HUI | SAI | VAI | | | | | | | | | | - * |------+------+------+------+------+------+------+------+------+------+------+------| - * | HUD | SAD | VAD | | | RGB_TOG | | | | | | - * `-----------------------------------------------------------------------------------' - */ - -[_RGB] = LAYOUT_planck_mit( - _______, _______, _______, _______, _______, RGB_TAP, _______, _______, _______, _______, _______, _______, - RGB_MOD, RGB_M_R, RGB_M_SW, RGB_M_K, RGB_M_X, RGB_M_G, _______, _______, _______, _______, _______, _______, - RGB_HUI, RGB_SAI, RGB_VAI, _______, _______, _______, _______, _______, _______, _______, _______, _______, - RGB_HUD, RGB_SAD, RGB_VAD, _______, _______, RGB_TOG, _______, _______, _______, _______, _______ ), - -/* Func - * ,-----------------------------------------------------------------------------------. - * | | | | | | | | | | |Layer0| Rest | - * |------+------+------+------+------+-------------+------+------+------+------+------| - * | Caps | | | | | Game | | | | | | | - * |------+------+------+------+------+------|------+------+------+------+------+------| - * | | | | | | | Numb | Music| | | | | - * |------+------+------+------+------+------+------+------+------+------+------+------| - * | | | | | | | | | | | | - * `-----------------------------------------------------------------------------------' - */ - -[_ADJUST] = LAYOUT_planck_mit( - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, TO( 0 ), RESET , - KC_CAPS, _______, _______, _______, _______, TO(_GAME), _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, TO(_NUMB), MU_TOG, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ ), - -[_GAME] = LAYOUT_planck_mit( - XXXXXXX,KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, XXXXXXX, - XXXXXXX,KC_Q, KC_W, KC_E, KC_R, KC_T, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, - XXXXXXX,KC_LCTL, KC_A, KC_S, KC_D, KC_B, KC_N, KC_M, XXXXXXX, XXXXXXX, KC_UP, TO( 0 ), - XXXXXXX,KC_LSFT, KC_Z, KC_X, KC_C, KC_SPC, XXXXXXX, XXXXXXX, KC_LEFT, KC_DOWN, KC_RGHT ), + [0] = LAYOUT_planck_mit( + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC, + KC_ESC, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_ENT, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_UP, + KC_LCTL, KC_LGUI, KC_LALT, KC_LBRC, KC_MINS, LT(1, KC_SPC), KC_EQL, KC_RBRC, KC_LEFT, KC_DOWN, KC_RGHT, + KC_VOLD, KC_VOLU, KC_PGDN, KC_PGUP), + [1] = LAYOUT_planck_mit( + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_BSPC, KC_TRNS, KC_DEL, KC_TRNS, KC_TRNS, KC_BSLS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS), }; -/* Encoder */ -static uint8_t encoder_state = 0; -static int8_t encoder_value = 0; -static int8_t encoder_LUT[] = { 0, -1, 1, 0, 1, 0, 0, -1, -1, 0, 0, 1, 0, 1, -1, 0 }; - -/* Timer */ -static uint16_t TAP_RGB_timer; +extern rgblight_config_t rgblight_config; +int RGB_LAYER0_mode = 6; +static uint8_t current_layer = 0; +static bool has_layer_changed = true; +uint16_t i = 0; +uint16_t j = 0; static uint16_t RGB_encoder_timer; +static uint16_t RGB_encoder_timer2; +static uint8_t RGB_encoder_dir = 0; -/* Encoder state RGB_display */ -static uint8_t RGB_encoder_count=6; -static bool RGB_encoder_bool = false; +const uint8_t RGBLED_RAINBOW_MOOD_INTERVALS[] PROGMEM = { + 30, + 5, + -5 +}; -/* RGB tap HUE */ -static uint16_t Type_Hue=270; - -void matrix_init_user( void ) -{ - wait_ms( 200 ); - - /* Encoder init */ - encoder_state = PIND & 0x3; - - /* Timer init */ - RGB_encoder_timer= timer_read(); - TAP_RGB_timer= timer_read(); +void matrix_init_user(void) { + RGB_encoder_timer = timer_read(); + RGB_encoder_timer2 = timer_read(); } +void matrix_scan_user(void) { + uint8_t layer = biton32(layer_state); -void matrix_scan_user( void ) -{ -/* Layer */ - uint8_t layer = biton32( layer_state ); - -/* Encoder */ - encoder_state <<= 2; - encoder_state |= (PIND & 0x3); - encoder_value += encoder_LUT[encoder_state & 0xF]; - -/* Encoder state RGB display */ - if (RGB_encoder_bool){ - if (timer_elapsed(RGB_encoder_timer) > 2500) { - RGB_encoder_bool=false; - if (RGB_TAP_STATE) { - rgblight_mode( 1 ); - rgblight_setrgb( RGB_TAP_Base_Color ); - }else{ - rgblight_mode( RGB_LAYER0_mode ); - } - } - } - -/* Display the Caps state */ - if (caps==true){ - rgblight_setrgb_at(RGB_Caps_Color,12); - } - -/* Start of Encoder clockwise */ - if ( encoder_value >= 4 ) { - - /* Start of Encoder state RGB_display */ - if (!RGB_encoder_bool){ - RGB_encoder_timer=timer_read(); - RGB_encoder_bool=true; - RGB_encoder_count=5; - rgblight_mode(1); - rgblight_setrgb( 0,0,0 ); - }else if (RGB_encoder_bool && timer_elapsed(RGB_encoder_timer) < 800) { - RGB_encoder_timer=timer_read(); - RGB_encoder_count-=1; - if (RGB_encoder_count>5 || RGB_encoder_count<1){ - RGB_encoder_count=5; + if (RGB_encoder_dir != 0) { + if (timer_elapsed(RGB_encoder_timer) > 1400) { + RGB_encoder_dir = 0; + rgblight_mode(RGB_LAYER0_mode); + } else { + if (timer_elapsed(RGB_encoder_timer2) > 700) { rgblight_setrgb(0, 0, 0); + RGB_encoder_timer2 = timer_read(); + } + if (timer_elapsed(RGB_encoder_timer2) > 80) { + if (RGB_encoder_dir == 1) { + rgblight_setrgb_at(128, 128, 0, 19); + } else { + rgblight_setrgb_at(128, 128, 0, 16); + } + } + if (timer_elapsed(RGB_encoder_timer2) > 180) { + if (RGB_encoder_dir == 1) { + rgblight_setrgb_at(160, 160, 0, 8); + } else { + rgblight_setrgb_at(160, 160, 0, 3); + } + } + if (timer_elapsed(RGB_encoder_timer2) > 280) { + if (RGB_encoder_dir == 1) { + rgblight_setrgb_at(192, 192, 0, 9); + } else { + rgblight_setrgb_at(192, 192, 0, 2); + } + } + if (timer_elapsed(RGB_encoder_timer2) > 400) { + if (RGB_encoder_dir == 1) { + rgblight_setrgb_at(224, 224, 0, 10); + } else { + rgblight_setrgb_at(224, 224, 0, 1); + } } } - rgblight_setrgb_at(0,255,0,5); - if (RGB_encoder_count<1) {RGB_encoder_count=1;} - switch (RGB_encoder_count) { - case 5: - rgblight_setrgb_at(0, 255, 0,4); - break; - case 4: - rgblight_setrgb_at(0, 255, 0,3); - break; - case 3: - rgblight_setrgb_at(0, 255, 0,2); - break; - case 2: - rgblight_setrgb_at(0, 255, 0,1); - break; - case 1: - rgblight_setrgb_at(0, 255, 0,0); - break; - } - /* End of Encoder state RGB_display */ - - /* Start of Set Encoder Keycode */ - switch ( layer ) - { - case 0: - tap_code( KC_VOLD ); - break; - case _CODE: - tap_code( KC_LEFT ); - break; - case _RGB: - rgblight_decrease_val(); - break; - case _NUMB: - tap_code( KC_LEFT ); - break; - case _MARO: - tap_code( KC_UP ); - break; - default: - tap_code( KC_VOLD ); - } - /* End of Set Encoder Keycode */ - } -/* End of Encoder clockwise */ - -/* Start of Encoder anti-clockwise */ - if ( encoder_value <= -4 ) - { - /* Start of Encoder state RGB_display */ - if (!RGB_encoder_bool){ - RGB_encoder_timer=timer_read(); - RGB_encoder_bool=true; - RGB_encoder_count=6; + /* layer rgb */ + if (layer != current_layer) { + has_layer_changed = true; + current_layer = layer; + } + if (has_layer_changed) { + if (layer == 0) { + rgblight_mode(RGB_LAYER0_mode); + } else { rgblight_mode(1); - rgblight_setrgb( 0,0,0 ); - }else if (RGB_encoder_bool && timer_elapsed(RGB_encoder_timer) < 800) { - RGB_encoder_timer=timer_read(); - RGB_encoder_count+=1; - if (RGB_encoder_count<6 || RGB_encoder_count> 10){ - RGB_encoder_count=6; - rgblight_setrgb(0, 0, 0); + for (i = 0; i < 48; i++) { + (i > 41) ? (j = i - 1) : (j = i); + uint16_t kc = keymap_key_to_keycode(layer, (keypos_t) {.row = 0, .col = i + }); + if (kc == KC_TRNS) { + setrgb(5, 5, 5, (LED_TYPE * ) & led[j]); /* TRNS color 0-255*/ + } else if (kc == KC_NO) { + setrgb(0, 0, 0, (LED_TYPE * ) & led[j]); /* NO color 0-255*/ + } else { + if (layer == 1) { + setrgb(128, 64, 0, (LED_TYPE * ) & led[j]); /* 1 layer 0-255*/ + } else if (layer == 2) { + setrgb(0, 64, 128, (LED_TYPE * ) & led[j]); /* 2*/ + } else if (layer == 3) { + setrgb(64, 128, 0, (LED_TYPE * ) & led[j]); /* 3*/ + } else if (layer == 4) { + setrgb(0, 128, 64, (LED_TYPE * ) & led[j]); /* 4*/ + } else if (layer == 5) { + setrgb(128, 0, 128, (LED_TYPE * ) & led[j]); /* 5*/ + } else if (layer == 6) { + setrgb(128, 0, 128, (LED_TYPE * ) & led[j]); /* 6*/ + } else if (layer == 7) { + setrgb(128, 128, 0, (LED_TYPE * ) & led[j]); /* 7*/ + } else if (layer == 8) { + setrgb(0, 128, 128, (LED_TYPE * ) & led[j]); /* 8*/ + } else if (layer == 9) { + setrgb(128, 192, 64, (LED_TYPE * ) & led[j]); /* 9*/ + } else if (layer == 10) { + setrgb(64, 192, 128, (LED_TYPE * ) & led[j]); /* 10*/ + } else if (layer == 11) { + setrgb(128, 64, 192, (LED_TYPE * ) & led[j]); /* 11*/ + } else if (layer == 12) { + setrgb(64, 128, 192, (LED_TYPE * ) & led[j]); /* 12*/ + } else if (layer == 13) { + setrgb(128, 192, 0, (LED_TYPE * ) & led[j]); /* 13*/ + } else if (layer == 14) { + setrgb(192, 0, 128, (LED_TYPE * ) & led[j]); /* 14*/ + } else if (layer == 15) { + setrgb(0, 192, 128, (LED_TYPE * ) & led[j]); /* 15*/ + } + } } - } - rgblight_setrgb_at(0, 0,255,6); - if (RGB_encoder_count>11) { - RGB_encoder_count=11; - } - switch (RGB_encoder_count) { - case 6: - rgblight_setrgb_at(0, 0,255,7); - break; - case 7: - rgblight_setrgb_at(0, 0,255,8); - break; - case 8: - rgblight_setrgb_at(0, 0,255,9); - break; - case 9: - rgblight_setrgb_at(0, 0,255,10); - break; - case 10: - rgblight_setrgb_at(0, 0,128,11); - break; - } - /* End of Encoder state RGB_display */ - - /* Start of Set Encoder Keycode */ - switch ( layer ) - { - case 0: - tap_code( KC_VOLU ); - break; - case _CODE: - tap_code( KC_RGHT ); - break; - case _RGB: - rgblight_increase_val(); - break; - case _NUMB: - tap_code( KC_RGHT ); - break; - case _MARO: - tap_code( KC_DOWN ); - break; - default: - tap_code( KC_VOLU ); - } - /* End of Set Encoder Keycode */ - -} - -/* End of Encoder anti-clockwise */ - - encoder_value %= 4; - -/* Start of RGB with Layer change */ - - /* Save the Layer0 RGB state */ - if ( save_rgbmode == true ) { - if (RGB_TAP_STATE==false) - { - RGB_LAYER0_mode = rgblight_config.mode; - } - } - save_rgbmode = false; - - /* When the layer is changed */ - if ( layer != current_layer && caps == false) { - has_layer_changed = true; - current_layer = layer; /* update layer information */ - } - /* Check for layer change, and apply color if its changed since last check */ - if ( has_layer_changed ) - { - /* change backlight based on layer. These should be numbers or whatever you defined the layers as */ - switch ( layer ) - { - case 0: - - /* if the key tap RGB effect is enable */ - if (RGB_TAP_STATE==true){ - rgblight_mode(1); - rgblight_setrgb( RGB_TAP_Base_Color ); - } - else{ - rgblight_mode( RGB_LAYER0_mode ); - } - break; - - case _CODE: //1 -/* Save Layer0 RGB state */ - RGB_LAYER0_mode = rgblight_config.mode; - -/* set all the RGB color under the switch */ - rgblight_mode( 1 ); - rgblight_setrgb(RGB_Layer_1_Base_Color); - - /* set each of the RGB led color under the switch */ - rgblight_setrgb_at(64, 64, 64,1); // Q - rgblight_setrgb_at(64, 64, 64,2); // W - rgblight_setrgb_at(64, 64, 64,3); // E - rgblight_setrgb_at(64, 64, 64,4); // R - rgblight_setrgb_at(64, 64, 64,5); // T - rgblight_setrgb_at(64, 64, 64,6); // Y - rgblight_setrgb_at(64, 64, 64,7); // U - rgblight_setrgb_at(64, 64, 64,8); // I - rgblight_setrgb_at(64, 64, 64,9); // O - rgblight_setrgb_at(64, 64, 64,10); // P - rgblight_setrgb_at(64, 0, 0,40); // - - rgblight_setrgb_at(64, 0, 0,42); // = - break; - - case _NAVI: //2 - RGB_LAYER0_mode = rgblight_config.mode; - - rgblight_mode( 1 ); - rgblight_setrgb(RGB_Layer_2_Base_Color); - - rgblight_setrgb_at(64, 0, 64,3); - rgblight_setrgb_at(64, 0, 64,14); - rgblight_setrgb_at(64, 0, 64,15); - rgblight_setrgb_at(64, 0, 64,16); - rgblight_setrgb_at(64, 64, 0,8); - rgblight_setrgb_at(64, 64, 0,10); - rgblight_setrgb_at(64, 64, 0,21); - rgblight_setrgb_at(64, 64, 0,29); - rgblight_setrgb_at(64, 0, 0,11); - rgblight_setrgb_at(0, 0, 64,34); - rgblight_setrgb_at(0, 0, 64,44); - rgblight_setrgb_at(0, 0, 64,45); - rgblight_setrgb_at(0, 0, 64,46); - break; - case _FUNC: //3 - RGB_LAYER0_mode = rgblight_config.mode; - - rgblight_mode( 1 ); - rgblight_setrgb(RGB_Layer_3_Base_Color); - - rgblight_setrgb_at(0, 0, 64,1); - rgblight_setrgb_at(0, 0, 64,2); - rgblight_setrgb_at(0, 0, 64,3); - rgblight_setrgb_at(0, 0, 64,4); - rgblight_setrgb_at(0, 0, 64,5); - rgblight_setrgb_at(0, 0, 64,6); - rgblight_setrgb_at(0, 0, 64,7); - rgblight_setrgb_at(0, 0, 64,8); - rgblight_setrgb_at(0, 0, 64,9); - rgblight_setrgb_at(0, 0, 64,10); - rgblight_setrgb_at(0, 0, 64,13); - rgblight_setrgb_at(0, 0, 64,14); - break; - - case _SYMB: //4 - RGB_LAYER0_mode = rgblight_config.mode; - - rgblight_mode( 1 ); - rgblight_setrgb(RGB_Layer_4_Base_Color); - - rgblight_setrgb_at(0, 64, 64,1); - rgblight_setrgb_at(0, 64, 64,2); - rgblight_setrgb_at(0, 64, 64,3); - rgblight_setrgb_at(0, 64, 64,4); - rgblight_setrgb_at(0, 64, 64,5); - rgblight_setrgb_at(0, 64, 64,6); - rgblight_setrgb_at(0, 64, 64,7); - rgblight_setrgb_at(0, 64, 64,8); - rgblight_setrgb_at(0, 64, 64,9); - rgblight_setrgb_at(0, 64, 64,10); - rgblight_setrgb_at(0, 64, 64,12); - rgblight_setrgb_at(0, 64, 64,22); - rgblight_setrgb_at(0, 64, 64,23); - rgblight_setrgb_at(0, 64, 64,32); - rgblight_setrgb_at(0, 64, 64,33); - rgblight_setrgb_at(0, 64, 64,34); - rgblight_setrgb_at(0, 64, 64,39); - rgblight_setrgb_at(0, 64, 64,40); - rgblight_setrgb_at(0, 64, 64,42); - rgblight_setrgb_at(0, 64, 64,43); - break; - - case _NUMB: //5 - RGB_LAYER0_mode = rgblight_config.mode; - - rgblight_mode( 1 ); - rgblight_setrgb(RGB_Layer_5_Base_Color); - - rgblight_setrgb_at(0,64,0,1); - rgblight_setrgb_at(0,64,0,2); - rgblight_setrgb_at(0,64,0,13); - rgblight_setrgb_at(0,64,0,14); - rgblight_setrgb_at(0,64,64,15); - rgblight_setrgb_at(64,64,64,7); - rgblight_setrgb_at(64,64,64,8); - rgblight_setrgb_at(64,64,64,9); - rgblight_setrgb_at(64,64,64,19); - rgblight_setrgb_at(64,64,64,20); - rgblight_setrgb_at(64,64,64,21); - rgblight_setrgb_at(64,64,64,31); - rgblight_setrgb_at(64,64,64,32); - rgblight_setrgb_at(64,64,64,33); - rgblight_setrgb_at(64,64,64,42); - rgblight_setrgb_at(64,64,64,43); - rgblight_setrgb_at(0,128,0,44); - break; - case _MARO: //6 - RGB_LAYER0_mode = rgblight_config.mode; - - rgblight_mode( 1 ); - rgblight_setrgb(RGB_Layer_6_Base_Color); - break; - - case _RGB: //7 - RGB_LAYER0_mode = rgblight_config.mode; - - rgblight_mode( 1 ); - rgblight_setrgb(RGB_Layer_7_Base_Color); - - rgblight_setrgb_at(1,143,225,0); - rgblight_setrgb_at(39,21,107,1); - rgblight_setrgb_at(208,0,0,2); - rgblight_setrgb_at(64,64,64,21); - break; - case _ADJUST: //8 - RGB_LAYER0_mode = rgblight_config.mode; - - rgblight_mode( 1 ); - rgblight_setrgb(RGB_Layer_8_Base_Color); - - rgblight_setrgb_at(0,64,0,10); - rgblight_setrgb_at(64,0,0,11); - rgblight_setrgb_at(0,64,0,17); - rgblight_setrgb_at(0,64,0,30); - rgblight_setrgb_at(6,50,50,12); - break; - - case _GAME: //9 - RGB_LAYER0_mode = rgblight_config.mode; - - rgblight_mode( 1 ); - rgblight_setrgb(RGB_Layer_9_Base_Color); - - rgblight_setrgb_at(0,0,64,15); - rgblight_setrgb_at(0,0,64,26); - rgblight_setrgb_at(0,0,64,27); - rgblight_setrgb_at(0,0,64,28); - rgblight_setrgb_at(64,0,0,35); - break; - - default: - rgblight_mode( RGB_LAYER0_mode ); + rgblight_set(); } has_layer_changed = false; } -/* End of RGB with Layer change */ + /* end of layer rgb */ +} -} // End of matrix_scan_user - - - -/* shift + enter = " from：https://github.com/qmk/qmk_firmware/blob/e899cb8940da04fa2610604f0aab417db7fac119/keyboards/mitosis/keymaps/datagrok/keymap.c */ - -bool comm_shifted = false; -bool ques_shifted = false; -static uint8_t key_index = 0; -uint8_t shifted; -uint16_t s_keycode; -bool *k_shifted; - -bool process_record_user( uint16_t keycode, keyrecord_t *record ){ - -/* Start of key tap RGB effect */ - if ( RGB_TAP_STATE ==true ) { - key_index=(record->event.key.col)+(record->event.key.row)*12; - -/* Change the Hue of the RGB color with the type speed */ - if (timer_elapsed(TAP_RGB_timer) >10000){ - TAP_RGB_timer=timer_read(); - Type_Hue=270; - }else if (timer_elapsed(TAP_RGB_timer) >1000){ - Type_Hue+=30; - if (Type_Hue>270) { - Type_Hue=270;} - }else{ - TAP_RGB_timer=timer_read(); - Type_Hue-=10; - if (Type_Hue<10) { - Type_Hue=10;} - } - if (key_index>42){ //fix the RGB index of the MIT layout position - key_index=key_index-1; - } - if ( record->event.pressed ) { - rgblight_sethsv_at(Type_Hue,255,255,key_index); - } else { - rgblight_setrgb_at(RGB_TAP_Base_Color,key_index); - } - } -/* End of key tap RGB effect */ - - switch ( keycode ) - { - /* save the RGB state when set the new */ - case RGB_M_R: - save_rgbmode = true; - break; - case RGB_M_SW: - save_rgbmode = true; - break; - case RGB_M_X: - save_rgbmode = true; - break; - case RGB_M_G: - save_rgbmode = true; - break; - case RGB_MODE_KNIGHT: - save_rgbmode = true; - break; - -/* Define a New Keycode: double zero */ - case KC_00: - if (record->event.pressed) { - // Do something when pressed - } else { - tap_code( KC_0 ); // send 0 - tap_code( KC_0 ); // send 0 twice without macro - } - return false; // Skip all further processing of this key - - /* when the REST key is pressed the 'R' key will RED,the "Bottom Left"(esc of qmk-dfu) will be GREEN */ - case RESET: - rgblight_mode( 1 ); - rgblight_setrgb( 0, 0, 0 ); - rgblight_setrgb_at(128, 0, 0,4); // R - rgblight_setrgb_at(6, 128, 24,36); // Bottom Left key - break; - -/* Define a New Keycode: key tap RGB effect toggle */ - case RGB_TAP: - if ( !(record->event.pressed)) { - /* If enable,the 'On' key will be green */ - if (RGB_TAP_STATE) { - RGB_TAP_STATE=false; - rgblight_mode( 1 ); - rgblight_setrgb( RGB_TAP_Base_Color ); - rgblight_setrgb_at(RGB_TAP_Off_Color,16); // O - on - }else{ - /* If disenable,the 'oFf' key will be red */ - RGB_TAP_STATE=true; - rgblight_mode( 1 ); - rgblight_setrgb( RGB_TAP_Base_Color ); - rgblight_setrgb_at(RGB_TAP_On_Color,9); // F - off - } - } - break; - -/* special shift keys */ - case KC_ENT: - s_keycode = KC_QUOT; - k_shifted = &ques_shifted; - break; - case KC_UP: - s_keycode = KC_SLSH; - k_shifted = &ques_shifted; - break; - case KC_DOWN: - s_keycode = KC_BSLS; - k_shifted = &ques_shifted; +bool process_record_user(uint16_t keycode, keyrecord_t * record) { + switch (keycode) { + case RGB_MOD: + RGB_LAYER0_mode = rgblight_config.mode; break; default: - return(true); + return (true); } + return (true); +} - shifted = get_mods() & (MOD_BIT( KC_LSHIFT ) | MOD_BIT( KC_RSHIFT ) ); - - /* Keydown. If shift is currently pressed, register its alternate keycode. */ - if ( record->event.pressed && shifted ) - { - *k_shifted = true; - register_code( s_keycode ); - return(false); - /* - * Keyup. If shift was pressed back when the key was pressed, unregister - * its alternate keycode. - */ - } else if ( !(record->event.pressed) && *k_shifted ) { - *k_shifted = false; - unregister_code( s_keycode ); - return(false); - /* Otherwise, behave as normal. */ +void encoder_update_user(uint8_t index, bool clockwise) { + RGB_encoder_timer = timer_read(); + RGB_encoder_timer2 = timer_read(); + uint8_t layer = biton32(layer_state); + if (clockwise) { + RGB_encoder_dir = 1; } else { - return(true); + RGB_encoder_dir = -1; } - -} // End ofprocess_record_user - - -void led_set_user( uint8_t usb_led ) -{ - static uint8_t old_usb_led = 0; - wait_ms( 10 ); /* gets rid of tick */ - - if ( (usb_led & (1 << USB_LED_CAPS_LOCK) ) && !(old_usb_led & (1 << USB_LED_CAPS_LOCK) ) ) { -/* CAPS on */ - caps= true; - rgblight_setrgb( 0,0,0 ); - rgblight_setrgb_at(RGB_Caps_Color,12); // caps key - #ifdef AUDIO_ENABLE - PLAY_SONG( tone_caps ); - #endif - }else if ( !(usb_led & (1 << USB_LED_CAPS_LOCK) ) && (old_usb_led & (1 << USB_LED_CAPS_LOCK) ) ) { - -/* CAPS off */ - caps= false; - if (RGB_TAP_STATE==false){ - rgblight_mode( RGB_LAYER0_mode ); - }else{ - rgblight_mode(1); - rgblight_setrgb( 0,0,0 ); + if (index == 0) /* Right encoder */ { + if (clockwise) { + register_code(keymap_key_to_keycode(layer, (keypos_t) {.row = 4, .col = 11 + })); + unregister_code(keymap_key_to_keycode(layer, (keypos_t) {.row = 4, .col = 11 + })); + } else { + register_code(keymap_key_to_keycode(layer, (keypos_t) {.row = 4, .col = 10 + })); + unregister_code(keymap_key_to_keycode(layer, (keypos_t) {.row = 4, .col = 10 + })); + } + } else if (index == 1) /* Left encoder */ { + if (clockwise) { + register_code(keymap_key_to_keycode(layer, (keypos_t) {.row = 4, .col = 1 + })); + unregister_code(keymap_key_to_keycode(layer, (keypos_t) {.row = 4, .col = 1 + })); + } else { + register_code(keymap_key_to_keycode(layer, (keypos_t) {.row = 4, .col = 0 + })); + unregister_code(keymap_key_to_keycode(layer, (keypos_t) {.row = 4, .col = 0 + })); } - #ifdef AUDIO_ENABLE - PLAY_SONG( tone_caps ); - #endif } - old_usb_led = usb_led; -} // End of led_set_user +} diff --git a/keyboards/tetris/keymaps/default/rules.mk b/keyboards/tetris/keymaps/default/rules.mk deleted file mode 100644 index e5ddcae8d92..00000000000 --- a/keyboards/tetris/keymaps/default/rules.mk +++ /dev/null @@ -1 +0,0 @@ -TAP_DANCE_ENABLE = yes diff --git a/keyboards/tetris/readme.md b/keyboards/tetris/readme.md index b2741caf1c0..260d453a84c 100644 --- a/keyboards/tetris/readme.md +++ b/keyboards/tetris/readme.md @@ -2,6 +2,8 @@ Tetris === A compact 40% (12x4) ortholinear keyboard (Planck Mit layout) with per switch RGB and encoder made by Fengz. +Fake keys on the 5th row are for configuring the encoder's keycode. + ![TetrisPhoto](https://i.imgur.com/quwEY0f.jpg) More: [Imgur](https://imgur.com/gallery/Azq2zUm). @@ -12,4 +14,4 @@ Make example for this keyboard (after setting up your build environment): make tetris:default -See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) then the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. \ No newline at end of file +See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) then the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. diff --git a/keyboards/tetris/rules.mk b/keyboards/tetris/rules.mk old mode 100644 new mode 100755 index 64c43455434..c3e641c8f21 --- a/keyboards/tetris/rules.mk +++ b/keyboards/tetris/rules.mk @@ -36,26 +36,25 @@ F_USB = $(F_CPU) # Interrupt driven control endpoint task(+60) OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT + # Boot Section Size in *bytes* #OPT_DEFS += -DBOOTLOADER_SIZE=4096 BOOTLOADER =qmk-dfu + # Build Options # comment out to disable the options. # BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) -MOUSEKEY_ENABLE = no # Mouse keys(+4700) +MOUSEKEY_ENABLE = yes # Mouse keys(+4700) EXTRAKEY_ENABLE = yes # Audio control and System control(+450) CONSOLE_ENABLE = no # Console for debug(+400) COMMAND_ENABLE = no # Commands for debug and configuration SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality -AUDIO_ENABLE = no +AUDIO_ENABLE = yes RGBLIGHT_ENABLE = yes -TAP_DANCE_ENABLE = no - -EXTRAFLAGS += -flto # Make the hex smaller - -LAYOUTS = planck_mit +EXTRAFLAGS = -flto +ENCODER_ENABLE = yes diff --git a/keyboards/tetris/tetris.c b/keyboards/tetris/tetris.c old mode 100644 new mode 100755 index 8d494c17f3e..f78de2f7be6 --- a/keyboards/tetris/tetris.c +++ b/keyboards/tetris/tetris.c @@ -1 +1 @@ -#include "tetris.h" +#include QMK_KEYBOARD_H diff --git a/keyboards/tetris/tetris.h b/keyboards/tetris/tetris.h old mode 100644 new mode 100755 index 0a036ec3b33..f5d13e5c2f8 --- a/keyboards/tetris/tetris.h +++ b/keyboards/tetris/tetris.h @@ -7,12 +7,14 @@ K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, \ K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, \ K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, \ - K300, K301, K302, K303, K304, K305, K307, K308, K309, K310, K311 \ + K300, K301, K302, K303, K304, K305, K307, K308, K309, K310, K311, \ + K400, K401, K410, K411 \ ) { \ { K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011 }, \ { K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111 }, \ { K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211 }, \ - { K300, K301, K302, K303, K304, K305, KC_NO, K307, K308, K309, K310, K311 } \ + { K300, K301, K302, K303, K304, K305, KC_NO, K307, K308, K309, K310, K311 }, \ + { K400, K401, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, K410, K411 } \ } -#endif \ No newline at end of file +#endif From 7a1086e4057a64f841ba178aa9eebb0002722ae2 Mon Sep 17 00:00:00 2001 From: Alex Ong Date: Fri, 19 Apr 2019 05:20:57 +1000 Subject: [PATCH 129/171] [core] Fix for eager_pr #5643 Added extra transfer_matrix_values() call whenever counters don't need updating --- quantum/debounce/eager_pr.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/quantum/debounce/eager_pr.c b/quantum/debounce/eager_pr.c index 5b460f6630a..26b17ed295f 100644 --- a/quantum/debounce/eager_pr.c +++ b/quantum/debounce/eager_pr.c @@ -48,11 +48,12 @@ void debounce_init(uint8_t num_rows) { void debounce(matrix_row_t raw[], matrix_row_t cooked[], uint8_t num_rows, bool changed) { uint8_t current_time = timer_read() % MAX_DEBOUNCE; + bool needed_update = counters_need_update; if (counters_need_update) { update_debounce_counters(num_rows, current_time); } - if (changed) { + if (changed || (needed_update && !counters_need_update)) { transfer_matrix_values(raw, cooked, num_rows, current_time); } } From 068571b9febb46edb64663bf6e84ae821a8219a3 Mon Sep 17 00:00:00 2001 From: skullydazed Date: Thu, 18 Apr 2019 15:59:51 -0700 Subject: [PATCH 130/171] Update our style guide (#5500) * Update our style guide * Clarify muiltple condition ifs * update the ifdef section --- .clang-format | 2 +- .editorconfig | 2 +- docs/contributing.md | 10 +++++++++- 3 files changed, 11 insertions(+), 3 deletions(-) diff --git a/.clang-format b/.clang-format index bd896176d54..4652b9e0aa7 100644 --- a/.clang-format +++ b/.clang-format @@ -20,7 +20,7 @@ SortIncludes: 'false' SpaceBeforeAssignmentOperators: 'true' SpaceBeforeParens: ControlStatements SpaceInEmptyParentheses: 'false' -TabWidth: '2' +TabWidth: '4' UseTab: Never ... diff --git a/.editorconfig b/.editorconfig index 4cd051ce952..c8cb35b861f 100644 --- a/.editorconfig +++ b/.editorconfig @@ -5,7 +5,7 @@ root = true [*] indent_style = space -indent_size = 2 +indent_size = 4 # We recommend you to keep these unchanged charset = utf-8 diff --git a/docs/contributing.md b/docs/contributing.md index 15066185bc6..7d1a9691cf5 100644 --- a/docs/contributing.md +++ b/docs/contributing.md @@ -56,7 +56,7 @@ Never made an open source contribution before? Wondering how contributions work Most of our style is pretty easy to pick up on, but right now it's not entirely consistent. You should match the style of the code surrounding your change, but if that code is inconsistent or unclear use the following guidelines: -* We indent using two spaces (soft tabs) +* We indent using four (4) spaces (soft tabs) * We use a modified One True Brace Style * Opening Brace: At the end of the same line as the statement that opens the block * Closing Brace: Lined up with the first character of the statement that opens the block @@ -71,6 +71,14 @@ Most of our style is pretty easy to pick up on, but right now it's not entirely * If you not sure if a comment is obvious, go ahead and include it. * In general we don't wrap lines, they can be as long as needed. If you do choose to wrap lines please do not wrap any wider than 76 columns. * We use `#pragma once` at the start of header files rather than old-style include guards (`#ifndef THIS_FILE_H`, `#define THIS_FILE_H`, ..., `#endif`) +* We accept both forms of preprocessor if's: `#ifdef DEFINED` and `#if defined(DEFINED)` + * If you are not sure which to prefer use the `#if defined(DEFINED)` form. + * Do not change existing code from one style to the other, except when moving to a multiple condition `#if`. + * Do not put whitespace between `#` and `if`. + * When deciding how (or if) to indent directives keep these points in mind: + * Readability is more important than consistency. + * Follow the file's existing style. If the file is mixed follow the style that makes sense for the section you are modifying. + * When choosing to indent you can follow the indention level of the surrounding C code, or preprocessor directives can have their own indent level. Choose the style that best communicates the intent of your code. Here is an example for easy reference: From dd290085c9e9c7d87fed64170407ca4cdc3c7433 Mon Sep 17 00:00:00 2001 From: QMK Bot Date: Thu, 18 Apr 2019 23:23:52 +0000 Subject: [PATCH 131/171] convert to unix line-endings [skip ci] --- .clang-format | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/.clang-format b/.clang-format index 4652b9e0aa7..96c48625900 100644 --- a/.clang-format +++ b/.clang-format @@ -1,4 +1,4 @@ ---- +--- BasedOnStyle: Google AlignAfterOpenBracket: Align AlignConsecutiveAssignments: 'true' From 8aee82e8b4d8108d8a9a56f8fd61ae1281ee4165 Mon Sep 17 00:00:00 2001 From: shela Date: Fri, 19 Apr 2019 09:41:01 +0900 Subject: [PATCH 132/171] [Keymap] Fix compilation error of feature #4301 (#5649) --- keyboards/comet46/keymaps/satt/action_pseudo_lut.c | 1 + keyboards/hhkb/keymaps/shela/action_pseudo_lut.c | 1 + 2 files changed, 2 insertions(+) diff --git a/keyboards/comet46/keymaps/satt/action_pseudo_lut.c b/keyboards/comet46/keymaps/satt/action_pseudo_lut.c index 0ac7133591f..4a7cb3a3a2f 100644 --- a/keyboards/comet46/keymaps/satt/action_pseudo_lut.c +++ b/keyboards/comet46/keymaps/satt/action_pseudo_lut.c @@ -1,4 +1,5 @@ #include "quantum.h" +#include "command.h" #include "action_pseudo_lut.h" static uint8_t send_key_shift_bit[SHIFT_BIT_SIZE]; diff --git a/keyboards/hhkb/keymaps/shela/action_pseudo_lut.c b/keyboards/hhkb/keymaps/shela/action_pseudo_lut.c index 5664d4d2a54..a15f5e5e0b3 100644 --- a/keyboards/hhkb/keymaps/shela/action_pseudo_lut.c +++ b/keyboards/hhkb/keymaps/shela/action_pseudo_lut.c @@ -1,4 +1,5 @@ #include "quantum.h" +#include "command.h" #include "action_pseudo_lut.h" static uint8_t send_key_shift_bit[SHIFT_BIT_SIZE]; From 74af596d8ac0e1ee5f308f520b22831ca32f0339 Mon Sep 17 00:00:00 2001 From: XScorpion2 Date: Thu, 18 Apr 2019 23:58:38 -0500 Subject: [PATCH 133/171] [Keyboard] niu_mini reduce firmware size (#5648) * Reducing firmware size by removing audio for keymaps that are not using it. * Update rules.mk --- keyboards/niu_mini/keymaps/planck/rules.mk | 1 + keyboards/niu_mini/rules.mk | 2 +- 2 files changed, 2 insertions(+), 1 deletion(-) diff --git a/keyboards/niu_mini/keymaps/planck/rules.mk b/keyboards/niu_mini/keymaps/planck/rules.mk index e69de29bb2d..8b137891791 100644 --- a/keyboards/niu_mini/keymaps/planck/rules.mk +++ b/keyboards/niu_mini/keymaps/planck/rules.mk @@ -0,0 +1 @@ + diff --git a/keyboards/niu_mini/rules.mk b/keyboards/niu_mini/rules.mk index b8d0ace97a4..496928ed70c 100644 --- a/keyboards/niu_mini/rules.mk +++ b/keyboards/niu_mini/rules.mk @@ -58,7 +58,7 @@ COMMAND_ENABLE = no # Commands for debug and configuration NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality MIDI_ENABLE = no # MIDI controls -AUDIO_ENABLE = yes # Audio output on port C6 +AUDIO_ENABLE = no # Audio output on port C6 UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID RGBLIGHT_ENABLE = yes # Enable WS2812 RGB underlight. From e3a940026ead4a3b4d0a9f536bd4cc5153e4140b Mon Sep 17 00:00:00 2001 From: Markus Weimar Date: Wed, 17 Oct 2018 10:40:52 +0200 Subject: [PATCH 134/171] Improve mouse keys docs and constant speed mode --- docs/feature_mouse_keys.md | 161 +++++++++++++++++++------------------ tmk_core/common/mousekey.c | 29 ++++--- tmk_core/common/mousekey.h | 60 ++++++++------ 3 files changed, 136 insertions(+), 114 deletions(-) diff --git a/docs/feature_mouse_keys.md b/docs/feature_mouse_keys.md index e64ddf3d066..75633969ec2 100644 --- a/docs/feature_mouse_keys.md +++ b/docs/feature_mouse_keys.md @@ -1,114 +1,121 @@ -# Mousekeys +# Mouse keys +Mouse keys is a feature that allows you to emulate a mouse using your keyboard. You can move the pointer at different speeds, press 5 buttons and scroll in all 8 directions. -Mousekeys is a feature that allows you to emulate a mouse using your keyboard. You can move the pointer around, click up to 5 buttons, and even scroll in all 4 directions. +## Adding mouse keys to your keyboard -There are 2 ways to define how the mousekeys behave, using "[auto-accelerating](#configuring-the-behavior-of-mousekeys-with-auto-accelerated-movement)" or "[3-speed constant](#configuring-the-behavior-of-mousekeys-with-3-speed-constant-movement)" behavior. +To use mouse keys, you must at least enable mouse keys support and map mouse actions to keys on your keyboard. -In either case, you will need to enable mousekeys in your makefile, -and add the relevant [keycodes](#mapping-mouse-actions-to-keyboard-keys) to your keymap. +### Enabling mouse keys -#### Enable Mousekeys +To enable mouse keys, add the following line to your keymap’s `rules.mk`: -To enable the mousekey functionality, add the following line to your keymap's `rules.mk`: - -``` +```c MOUSEKEY_ENABLE = yes ``` -#### Mapping Mouse Actions to Keyboard Keys +### Mapping mouse actions -You can use these keycodes within your keymap to map button presses to mouse actions: +In your keymap you can use the following keycodes to map key presses to mouse actions: -|Key |Aliases |Description | -|----------------|---------|-----------------------------------| -|`KC_MS_UP` |`KC_MS_U`|Mouse Cursor Up | -|`KC_MS_DOWN` |`KC_MS_D`|Mouse Cursor Down | -|`KC_MS_LEFT` |`KC_MS_L`|Mouse Cursor Left | -|`KC_MS_RIGHT` |`KC_MS_R`|Mouse Cursor Right | -|`KC_MS_BTN1` |`KC_BTN1`|Mouse Button 1 | -|`KC_MS_BTN2` |`KC_BTN2`|Mouse Button 2 | -|`KC_MS_BTN3` |`KC_BTN3`|Mouse Button 3 | -|`KC_MS_BTN4` |`KC_BTN4`|Mouse Button 4 | -|`KC_MS_BTN5` |`KC_BTN5`|Mouse Button 5 | -|`KC_MS_WH_UP` |`KC_WH_U`|Mouse Wheel Up | -|`KC_MS_WH_DOWN` |`KC_WH_D`|Mouse Wheel Down | -|`KC_MS_WH_LEFT` |`KC_WH_L`|Mouse Wheel Left | -|`KC_MS_WH_RIGHT`|`KC_WH_R`|Mouse Wheel Right | -|`KC_MS_ACCEL0` |`KC_ACL0`|Set mouse acceleration to 0(slow) | -|`KC_MS_ACCEL1` |`KC_ACL1`|Set mouse acceleration to 1(medium)| -|`KC_MS_ACCEL2` |`KC_ACL2`|Set mouse acceleration to 2(fast) | +|Key |Aliases |Description | +|----------------|---------|-----------------| +|`KC_MS_UP` |`KC_MS_U`|Move cursor up | +|`KC_MS_DOWN` |`KC_MS_D`|Move cursor down | +|`KC_MS_LEFT` |`KC_MS_L`|Move cursor left | +|`KC_MS_RIGHT` |`KC_MS_R`|Move cursor right| +|`KC_MS_BTN1` |`KC_BTN1`|Press button 1 | +|`KC_MS_BTN2` |`KC_BTN2`|Press button 2 | +|`KC_MS_BTN3` |`KC_BTN3`|Press button 3 | +|`KC_MS_BTN4` |`KC_BTN4`|Press button 4 | +|`KC_MS_BTN5` |`KC_BTN5`|Press button 5 | +|`KC_MS_WH_UP` |`KC_WH_U`|Move wheel up | +|`KC_MS_WH_DOWN` |`KC_WH_D`|Move wheel down | +|`KC_MS_WH_LEFT` |`KC_WH_L`|Move wheel left | +|`KC_MS_WH_RIGHT`|`KC_WH_R`|Move wheel right | +|`KC_MS_ACCEL0` |`KC_ACL0`|Set speed to 0 | +|`KC_MS_ACCEL1` |`KC_ACL1`|Set speed to 1 | +|`KC_MS_ACCEL2` |`KC_ACL2`|Set speed to 2 | +For an example, see [the mouse layer in this keymap](https://github.com/qmk/qmk_firmware/blob/1df10ae3bfc146805c75b06dc0c126cd1ef3a60a/keyboards/clueboard/66/keymaps/mouse_keys/keymap.c#L40). -## Configuring the Behavior of Mousekeys with auto-accelerated movement +## Configuring mouse keys -This behavior is intended to emulate the X Window System MouseKeysAccel feature. You can read more about it [on Wikipedia](https://en.wikipedia.org/wiki/Mouse_keys). +Mouse keys supports two different modes to move the cursor: -The default speed for controlling the mouse with the keyboard is intentionally slow. You can adjust these parameters by adding these settings to your keymap's `config.h` file. All times are specified in milliseconds (ms). +* **Accelerated (default):** Holding movement keys accelerates the cursor until it reaches its maximum speed. +* **Constant:** Holding movement keys moves the cursor at constant speeds. -``` -#define MOUSEKEY_DELAY 300 -#define MOUSEKEY_INTERVAL 50 -#define MOUSEKEY_MAX_SPEED 10 -#define MOUSEKEY_TIME_TO_MAX 20 -#define MOUSEKEY_WHEEL_MAX_SPEED 8 -#define MOUSEKEY_WHEEL_TIME_TO_MAX 40 -``` +The same principle applies to scrolling. -#### `MOUSEKEY_DELAY` +Configuration options that are times, intervals or delays are given in milliseconds. Scroll speed is given as multiples of the default scroll step. For example, a scroll speed of 8 means that each scroll action covers 8 times the length of the default scroll step as defined by your operating system or application. -When one of the mouse movement buttons is pressed this setting is used to define the delay between that button press and the mouse cursor moving. Some people find that small movements are impossible if this setting is too low, while settings that are too high feel sluggish. +### Accelerated mode -#### `MOUSEKEY_INTERVAL` +This is the default mode. You can adjust the cursor and scrolling acceleration using the following settings in your keymap’s `config.h` file: -When a movement key is held down this specifies how long to wait between each movement report. Lower settings will translate into an effectively higher mouse speed. +|Define |Default|Description | +|----------------------------|-------|---------------------------------------------------------| +|`MOUSEKEY_DELAY` |300 |Delay between pressing a movement key and cursor movement| +|`MOUSEKEY_INTERVAL` |50 |Time between cursor movements | +|`MOUSEKEY_MAX_SPEED` |10 |Maximum cursor speed at which acceleration stops | +|`MOUSEKEY_TIME_TO_MAX` |20 |Time until maximum cursor speed is reached | +|`MOUSEKEY_WHEEL_MAX_SPEED` |8 |Maximum number of scroll steps per scroll action | +|`MOUSEKEY_WHEEL_TIME_TO_MAX`|40 |Time until maximum scroll speed is reached | -#### `MOUSEKEY_MAX_SPEED` +Tips: -As a movement key is held down the speed of the mouse cursor will increase until it reaches `MOUSEKEY_MAX_SPEED`. +* Setting `MOUSEKEY_DELAY` too low makes the cursor unresponsive. Setting it too high makes small movements difficult. +* For smoother cursor movements, lower the value of `MOUSEKEY_INTERVAL`. If the refresh rate of your display is 60Hz, you could set it to `16` (1/60). As this raises the cursor speed significantly, you may want to lower `MOUSEKEY_MAX_SPEED`. +* Setting `MOUSEKEY_TIME_TO_MAX` or `MOUSEKEY_WHEEL_TIME_TO_MAX` to `0` will disable acceleration for the cursor or scrolling respectively. This way you can make one of them constant while keeping the other accelerated, which is not possible in constant speed mode. -#### `MOUSEKEY_TIME_TO_MAX` +Cursor acceleration uses the same algorithm as the X Window System MouseKeysAccel feature. You can read more about it [on Wikipedia](https://en.wikipedia.org/wiki/Mouse_keys). -How long you want to hold down a movement key for until `MOUSEKEY_MAX_SPEED` is reached. This controls how quickly your cursor will accelerate. +### Constant mode -#### `MOUSEKEY_WHEEL_MAX_SPEED` +In this mode you can define multiple different speeds for both the cursor and the mouse wheel. There is no acceleration. `KC_ACL0`, `KC_ACL1` and `KC_ACL2` change the cursor and scroll speed to their respective setting. -The top speed for scrolling movements. +You can choose whether speed selection is momentary or tap-to-select: -#### `MOUSEKEY_WHEEL_TIME_TO_MAX` +* **Momentary:** The chosen speed is only active while you hold the respective key. When the key is raised, mouse keys returns to the unmodified speed. +* **Tap-to-select:** The chosen speed is activated when you press the respective key and remains active even after the key has been raised. The default speed is that of `KC_ACL1`. There is no unmodified speed. -How long you want to hold down a scroll key for until `MOUSEKEY_WHEEL_MAX_SPEED` is reached. This controls how quickly your scrolling will accelerate. +The default speeds from slowest to fastest are as follows: +* **Momentary:** `KC_ACL0` < `KC_ACL1` < *unmodified* < `KC_ACL2` +* **Tap-to-select:** `KC_ACL0` < `KC_ACL1` < `KC_ACL2` -## Configuring the Behavior of Mousekeys with 3-speed constant movement +To use constant speed mode, you must at least define `MK_3_SPEED` in your keymap’s `config.h` file: -In your keymap's `config.h`, you must add the line: -``` +```c #define MK_3_SPEED ``` -Then you can precisely define 3 different speeds for both the cursor and the mouse wheel, and also whether speed selection is momentary or tap-to-select. -For each speed, you can specify how many milliseconds you want between reports(interval), and how far you want to it to move per report(offset). -For example: +To enable momentary mode, also define `MK_MOMENTARY_ACCEL`: -``` -#define MK_3_SPEED -#define MK_MOMENTARY_ACCEL // comment this out for tap-to-select acceleration -// cursor speeds: -#define MK_C_OFFSET_SLOW 1 // pixels -#define MK_C_INTERVAL_SLOW 100 // milliseconds -#define MK_C_OFFSET_MED 4 -#define MK_C_INTERVAL_MED 16 -#define MK_C_OFFSET_FAST 12 -#define MK_C_INTERVAL_FAST 16 -// scroll wheel speeds: -#define MK_W_OFFSET_SLOW 1 // wheel clicks -#define MK_W_INTERVAL_SLOW 400 // milliseconds -#define MK_W_OFFSET_MED 1 -#define MK_W_INTERVAL_MED 200 -#define MK_W_OFFSET_FAST 1 -#define MK_W_INTERVAL_FAST 100 +```c +#define MK_MOMENTARY_ACCEL ``` -Medium values will be used as the default or unmodified speed. -The speed at which both the cursor and scrolling move can be selected with KC_ACL0, KC_ACL1, KC_ACL2 for slow, medium, and fast. However, if you leave MK_MOMENTARY_ACCEL defined then there is no need to ever send KC_ACL1, since that will be the unmodified speed. +Use the following settings if you want to adjust cursor movement or scrolling: + +|Define |Default |Description | +|---------------------|-------------|-------------------------------------------| +|`MK_3_SPEED` |*Not defined*|Enable constant cursor speeds | +|`MK_MOMENTARY_ACCEL` |*Not defined*|Enable momentary speed selection | +|`MK_C_OFFSET_UNMOD` |16 |Cursor offset per movement (unmodified) | +|`MK_C_INTERVAL_UNMOD`|16 |Time between cursor movements (unmodified) | +|`MK_C_OFFSET_0` |1 |Cursor offset per movement (`KC_ACL0`) | +|`MK_C_INTERVAL_0` |32 |Time between cursor movements (`KC_ACL0`) | +|`MK_C_OFFSET_1` |4 |Cursor offset per movement (`KC_ACL1`) | +|`MK_C_INTERVAL_1` |16 |Time between cursor movements (`KC_ACL1`) | +|`MK_C_OFFSET_2` |32 |Cursor offset per movement (`KC_ACL2`) | +|`MK_C_INTERVAL_2` |16 |Time between cursor movements (`KC_ACL2`) | +|`MK_W_OFFSET_UNMOD` |1 |Scroll steps per scroll action (unmodified)| +|`MK_W_INTERVAL_UNMOD`|40 |Time between scroll steps (unmodified) | +|`MK_W_OFFSET_0` |1 |Scroll steps per scroll action (`KC_ACL0`) | +|`MK_W_INTERVAL_0` |360 |Time between scroll steps (`KC_ACL0`) | +|`MK_W_OFFSET_1` |1 |Scroll steps per scroll action (`KC_ACL1`) | +|`MK_W_INTERVAL_1` |120 |Time between scroll steps (`KC_ACL1`) | +|`MK_W_OFFSET_2` |1 |Scroll steps per scroll action (`KC_ACL2`) | +|`MK_W_INTERVAL_2` |20 |Time between scroll steps (`KC_ACL2`) | diff --git a/tmk_core/common/mousekey.c b/tmk_core/common/mousekey.c index 87239fbb76b..8c918430634 100644 --- a/tmk_core/common/mousekey.c +++ b/tmk_core/common/mousekey.c @@ -171,28 +171,31 @@ void mousekey_off(uint8_t code) { enum { - mkspd_slow, - mkspd_med, - mkspd_fast, + mkspd_unmod, + mkspd_0, + mkspd_1, + mkspd_2, mkspd_COUNT }; -static uint8_t mk_speed = mkspd_med; -#ifdef MK_MOMENTARY_ACCEL -static uint8_t mkspd_DEFAULT = mkspd_med; +#ifndef MK_MOMENTARY_ACCEL +static uint8_t mk_speed = mkspd_1; +#else +static uint8_t mk_speed = mkspd_unmod; +static uint8_t mkspd_DEFAULT = mkspd_unmod; #endif static uint16_t last_timer_c = 0; static uint16_t last_timer_w = 0; uint16_t c_offsets[mkspd_COUNT] = { - MK_C_OFFSET_SLOW, MK_C_OFFSET_MED, MK_C_OFFSET_FAST + MK_C_OFFSET_UNMOD, MK_C_OFFSET_0, MK_C_OFFSET_1, MK_C_OFFSET_2 }; uint16_t c_intervals[mkspd_COUNT] = { - MK_C_INTERVAL_SLOW, MK_C_INTERVAL_MED, MK_C_INTERVAL_FAST + MK_C_INTERVAL_UNMOD, MK_C_INTERVAL_0, MK_C_INTERVAL_1, MK_C_INTERVAL_2 }; uint16_t w_offsets[mkspd_COUNT] = { - MK_W_OFFSET_SLOW, MK_W_OFFSET_MED, MK_W_OFFSET_FAST + MK_W_OFFSET_UNMOD, MK_W_OFFSET_0, MK_W_OFFSET_1, MK_W_OFFSET_2 }; uint16_t w_intervals[mkspd_COUNT] = { - MK_W_INTERVAL_SLOW, MK_W_INTERVAL_MED, MK_W_INTERVAL_FAST + MK_W_INTERVAL_UNMOD, MK_W_INTERVAL_0, MK_W_INTERVAL_1, MK_W_INTERVAL_2 }; @@ -254,9 +257,9 @@ void mousekey_on(uint8_t code) { else if (code == KC_MS_BTN3) mouse_report.buttons |= MOUSE_BTN3; else if (code == KC_MS_BTN4) mouse_report.buttons |= MOUSE_BTN4; else if (code == KC_MS_BTN5) mouse_report.buttons |= MOUSE_BTN5; - else if (code == KC_MS_ACCEL0) mk_speed = mkspd_slow; - else if (code == KC_MS_ACCEL1) mk_speed = mkspd_med; - else if (code == KC_MS_ACCEL2) mk_speed = mkspd_fast; + else if (code == KC_MS_ACCEL0) mk_speed = mkspd_0; + else if (code == KC_MS_ACCEL1) mk_speed = mkspd_1; + else if (code == KC_MS_ACCEL2) mk_speed = mkspd_2; if (mk_speed != old_speed) adjust_speed(); } diff --git a/tmk_core/common/mousekey.h b/tmk_core/common/mousekey.h index ce3501b232a..89c1eaf11a5 100644 --- a/tmk_core/common/mousekey.h +++ b/tmk_core/common/mousekey.h @@ -64,42 +64,54 @@ along with this program. If not, see . #else /* #ifndef MK_3_SPEED */ -#ifndef MK_C_OFFSET_SLOW -#define MK_C_OFFSET_SLOW 1 +#ifndef MK_C_OFFSET_UNMOD +#define MK_C_OFFSET_UNMOD 16 #endif -#ifndef MK_C_INTERVAL_SLOW -#define MK_C_INTERVAL_SLOW 100 +#ifndef MK_C_INTERVAL_UNMOD +#define MK_C_INTERVAL_UNMOD 16 #endif -#ifndef MK_C_OFFSET_MED -#define MK_C_OFFSET_MED 4 +#ifndef MK_C_OFFSET_0 +#define MK_C_OFFSET_0 1 #endif -#ifndef MK_C_INTERVAL_MED -#define MK_C_INTERVAL_MED 16 +#ifndef MK_C_INTERVAL_0 +#define MK_C_INTERVAL_0 32 #endif -#ifndef MK_C_OFFSET_FAST -#define MK_C_OFFSET_FAST 12 +#ifndef MK_C_OFFSET_1 +#define MK_C_OFFSET_1 4 #endif -#ifndef MK_C_INTERVAL_FAST -#define MK_C_INTERVAL_FAST 16 +#ifndef MK_C_INTERVAL_1 +#define MK_C_INTERVAL_1 16 +#endif +#ifndef MK_C_OFFSET_2 +#define MK_C_OFFSET_2 32 +#endif +#ifndef MK_C_INTERVAL_2 +#define MK_C_INTERVAL_2 16 #endif -#ifndef MK_W_OFFSET_SLOW -#define MK_W_OFFSET_SLOW 1 +#ifndef MK_W_OFFSET_UNMOD +#define MK_W_OFFSET_UNMOD 1 #endif -#ifndef MK_W_INTERVAL_SLOW -#define MK_W_INTERVAL_SLOW 400 +#ifndef MK_W_INTERVAL_UNMOD +#define MK_W_INTERVAL_UNMOD 40 #endif -#ifndef MK_W_OFFSET_MED -#define MK_W_OFFSET_MED 1 +#ifndef MK_W_OFFSET_0 +#define MK_W_OFFSET_0 1 #endif -#ifndef MK_W_INTERVAL_MED -#define MK_W_INTERVAL_MED 200 +#ifndef MK_W_INTERVAL_0 +#define MK_W_INTERVAL_0 360 #endif -#ifndef MK_W_OFFSET_FAST -#define MK_W_OFFSET_FAST 1 +#ifndef MK_W_OFFSET_1 +#define MK_W_OFFSET_1 1 #endif -#ifndef MK_W_INTERVAL_FAST -#define MK_W_INTERVAL_FAST 100 +#ifndef MK_W_INTERVAL_1 +#define MK_W_INTERVAL_1 120 +#endif +#ifndef MK_W_OFFSET_2 +#define MK_W_OFFSET_2 1 +#endif +#ifndef MK_W_INTERVAL_2 +#define MK_W_INTERVAL_2 20 #endif #endif /* #ifndef MK_3_SPEED */ From 5ed7d9c9ca48e1b6f3610f62bb12668d1f75a845 Mon Sep 17 00:00:00 2001 From: Markus Weimar Date: Fri, 19 Apr 2019 16:27:23 +0200 Subject: [PATCH 135/171] Update XD75 keymap by markus (#5651) --- keyboards/xd75/keymaps/markus/config.h | 39 ++++++-- keyboards/xd75/keymaps/markus/keymap.c | 127 ++++++++++++------------ keyboards/xd75/keymaps/markus/readme.md | 8 +- keyboards/xd75/keymaps/markus/rules.mk | 36 +++---- 4 files changed, 109 insertions(+), 101 deletions(-) diff --git a/keyboards/xd75/keymaps/markus/config.h b/keyboards/xd75/keymaps/markus/config.h index 4e4e6f0d739..a3e1631715d 100644 --- a/keyboards/xd75/keymaps/markus/config.h +++ b/keyboards/xd75/keymaps/markus/config.h @@ -1,4 +1,4 @@ -/* Copyright 2018 Markus Weimar +/* Copyright 2019 Markus Weimar * * This program is free software: you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -18,12 +18,31 @@ // place overrides here -// Mousekeys -#define MOUSEKEY_MOVE_DELTA 1 -#define MOUSEKEY_WHEEL_DELTA 1 -#define MOUSEKEY_DELAY 90 -#define MOUSEKEY_INTERVAL 16 -#define MOUSEKEY_MAX_SPEED 20 -#define MOUSEKEY_TIME_TO_MAX 0 -#define MOUSEKEY_WHEEL_MAX_SPEED 1 -#define MOUSEKEY_WHEEL_TIME_TO_MAX 0 +// Mouse keys (accelerated) +//#define MOUSEKEY_MOVE_DELTA 1 +//#define MOUSEKEY_WHEEL_DELTA 1 +//#define MOUSEKEY_DELAY 90 +//#define MOUSEKEY_INTERVAL 16 +//#define MOUSEKEY_MAX_SPEED 20 +//#define MOUSEKEY_TIME_TO_MAX 0 +//#define MOUSEKEY_WHEEL_MAX_SPEED 1 +//#define MOUSEKEY_WHEEL_TIME_TO_MAX 0 +// Mouse keys (constant) +#define MK_3_SPEED +#define MK_MOMENTARY_ACCEL +#define MK_C_OFFSET_UNMOD 18 +#define MK_C_INTERVAL_UNMOD 16 +#define MK_C_OFFSET_0 2 +#define MK_C_INTERVAL_0 16 +#define MK_C_OFFSET_1 6 +#define MK_C_INTERVAL_1 16 +#define MK_C_OFFSET_2 36 +#define MK_C_INTERVAL_2 16 +#define MK_W_OFFSET_UNMOD 1 +#define MK_W_INTERVAL_UNMOD 40 +#define MK_W_OFFSET_0 1 +#define MK_W_INTERVAL_0 360 +#define MK_W_OFFSET_1 1 +#define MK_W_INTERVAL_1 120 +#define MK_W_OFFSET_2 1 +#define MK_W_INTERVAL_2 20 diff --git a/keyboards/xd75/keymaps/markus/keymap.c b/keyboards/xd75/keymaps/markus/keymap.c index eaf62015154..9b8ab52fc35 100644 --- a/keyboards/xd75/keymaps/markus/keymap.c +++ b/keyboards/xd75/keymaps/markus/keymap.c @@ -1,4 +1,4 @@ -/* Copyright 2018 Markus Weimar +/* Copyright 2019 Markus Weimar * * This program is free software: you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -19,30 +19,29 @@ #define ________ KC_TRNS #define ___xx___ KC_NO -#define NKRO_TG MAGIC_TOGGLE_NKRO enum my_layers { - _QWZ, - _QWY, - _GAM, - _FN1, - _FN2, - _FN3, + _QWZ, + _QWY, + _GAM, + _FN1, + _FN2, + _FN3, }; enum my_keycodes { - QWERTZ = SAFE_RANGE, - QWERTY, - GAMING, - FN1, - FN2, - FN3 + QWERTZ = SAFE_RANGE, + QWERTY, + GAMING, + FN1, + FN2, + FN3 }; enum my_ucis { - UNI_LNX, - UNI_MAC, - UNI_WIN, + UNI_LNX, + UNI_MAC, + UNI_WIN, }; const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { @@ -118,7 +117,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------| * | | " | ' | ‚ | ‘ | ’ | | | | | | [ | ] | ! | ? | | * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------| - * | | ° | ^ | „ | “ | ” | | | | # | < | > | … | – | | + * | | ° | ^ | „ | “ | ” | | | | # | < | > | … | – EN | | * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------| * | | | | | | | | | | | | | | | | * '--------------------------------------------------------------------------------------------------------------------------------------' @@ -133,19 +132,19 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { /* FN2 * .--------------------------------------------------------------------------------------------------------------------------------------. - * | | | | | % | ( | ) | P/ | P* | P- | Print | Scroll | Pause | ẞ | | + * | | | | | % | ( | ) | P/ | P* | P- | Print | Scroll | Pause | ẞ | − MNS | * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------| * | | | Mute | Vol- | Vol+ | Bspc | P7 | P8 | P9 | P+ | WH_U | MS_U | WH_D | × | ÷ | * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------| - * | | App | ACL0 | ACL1 | ACL2 | Space | P4 | P5 | P6 | WH_L | MS_L | MS_D | MS_R | WH_R | | + * | | App | ACL2 | ACL1 | ACL0 | Space | P4 | P5 | P6 | WH_L | MS_L | MS_D | MS_R | WH_R | | * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------| - * | | | Prev | Play | Next | Tab | P1 | P2 | P3 | PEnter | BTN1 | BTN2 | BTN3 | — | | + * | | | Prev | Play | Next | Tab | P1 | P2 | P3 | PEnter | BTN1 | BTN2 | BTN3 | — EM | | * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------| * | Fn2 | | | | | PEnter | P0 | . : | P, | BTN1 | BTN2 | BTN3 | | | | * '--------------------------------------------------------------------------------------------------------------------------------------' */ [_FN2] = { -{ ___xx___, ___xx___, ___xx___, ___xx___, DE_PERC, DE_LPRN, DE_RPRN, KC_PSLS, KC_PAST, KC_PMNS, KC_PSCR, KC_LSCR, KC_PAUS, UC(L'ẞ'), ___xx___ }, +{ ___xx___, ___xx___, ___xx___, ___xx___, DE_PERC, DE_LPRN, DE_RPRN, KC_PSLS, KC_PAST, KC_PMNS, KC_PSCR, KC_LSCR, KC_PAUS, UC(L'ẞ'), UC(L'−') }, { ________, ___xx___, KC_MUTE, KC_VOLD, KC_VOLU, KC_BSPC, KC_P7, KC_P8, KC_P9, KC_PPLS, KC_WH_U, KC_MS_U, KC_WH_D, UC(L'×'), UC(L'÷') }, { ________, KC_APP, KC_ACL2, KC_ACL1, KC_ACL0, KC_SPC, KC_P4, KC_P5, KC_P6, KC_WH_L, KC_MS_L, KC_MS_D, KC_MS_R, KC_WH_R, ________ }, { ________, ___xx___, KC_MPRV, KC_MPLY, KC_MNXT, KC_TAB, KC_P1, KC_P2, KC_P3, KC_PENT, KC_BTN1, KC_BTN2, KC_BTN3, UC(L'—'), ________ }, @@ -156,61 +155,61 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { * .--------------------------------------------------------------------------------------------------------------------------------------. * | F13 | F14 | F15 | F16 | F17 | F18 | U LNX | U WIN | U MAC | F19 | F20 | F21 | F22 | F23 | F24 | * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------| - * | | QWERTZ | QWERTY | | NKRO | ThinSp | L TOG | L MP | L MOD | | Pg Up | Up | Pg Dn | | | + * | | QWERTZ | QWERTY | GAMING | | | L TOG | L MP | L MOD | | Pg Up | Up | Pg Dn | | | * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------| - * | | NaNbSp | | › | ‹ | GAMING | L HUI | L SAI | L VAI | Home | Left | Down | Right | End | | + * | | | | › | ‹ | | L HUI | L SAI | L VAI | Home | Left | Down | Right | End | | * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------| - * | | | | » | « | | L HUD | L SAD | L VAD | FigSp | | | | NbHyph | | + * | | | | » | « | | L HUD | L SAD | L VAD | NumSp | ThinSp | NaNbSp | NbSp | NbHyph | | * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------| - * | | | | | | | | Reset | | NbSp | | | | | | + * | | | | | | | | Reset | | | | | | | | * '--------------------------------------------------------------------------------------------------------------------------------------' */ [_FN3] = { { KC_F13, KC_F14, KC_F15, KC_F16, KC_F17, KC_F18, UNI_LNX, UNI_WIN, UNI_MAC, KC_F19, KC_F20, KC_F21, KC_F22, KC_F23, KC_F24 }, -{ ________, QWERTZ, QWERTY, ___xx___, NKRO_TG, UC(L' '), RGB_TOG, RGB_M_P, RGB_MOD, ___xx___, KC_PGUP, KC_UP, KC_PGDN, ___xx___, ___xx___ }, -{ ________, UC(L' '), ___xx___, UC(L'›'), UC(L'‹'), GAMING, RGB_HUI, RGB_SAI, RGB_VAI, KC_HOME, KC_LEFT, KC_DOWN, KC_RIGHT, KC_END, ________ }, -{ ________, ___xx___, ___xx___, UC(L'»'), UC(L'«'), ___xx___, RGB_HUD, RGB_SAD, RGB_VAD, UC(L' '), ___xx___, ___xx___, ___xx___, UC(L'‑'), ________ }, -{ ___xx___, ________, ________, ________, ________, ________, ________, RESET, ________, UC(L' '), ________, ________, ________, ________, ________ }, +{ ________, QWERTZ, QWERTY, GAMING, ___xx___, ___xx___, RGB_TOG, RGB_M_P, RGB_MOD, ___xx___, KC_PGUP, KC_UP, KC_PGDN, ___xx___, ___xx___ }, +{ ________, ___xx___, ___xx___, UC(L'›'), UC(L'‹'), ___xx___, RGB_HUI, RGB_SAI, RGB_VAI, KC_HOME, KC_LEFT, KC_DOWN, KC_RIGHT, KC_END, ________ }, +{ ________, ___xx___, ___xx___, UC(L'»'), UC(L'«'), ___xx___, RGB_HUD, RGB_SAD, RGB_VAD, UC(L' '), UC(L' '), UC(L' '), UC(L' '), UC(L'‑'), ________ }, +{ ___xx___, ________, ________, ________, ________, ________, ________, RESET, ________, ________, ________, ________, ________, ________, ________ }, }, }; void matrix_init_user(){ - set_unicode_input_mode(UC_LNX); + set_unicode_input_mode(UC_LNX); } bool process_record_user(uint16_t keycode, keyrecord_t *record) { - switch(keycode) { - case QWERTZ: - if (record->event.pressed) { - set_single_persistent_default_layer(_QWZ); - } - return false; - break; - case QWERTY: - if (record->event.pressed) { - set_single_persistent_default_layer(_QWY); - } - return false; - break; - case GAMING: - if (record->event.pressed) { - set_single_persistent_default_layer(_GAM); - } - return false; - break; - case UNI_LNX: - set_unicode_input_mode(UC_LNX); - return false; - break; - case UNI_WIN: - set_unicode_input_mode(UC_WINC); - return false; - break; - case UNI_MAC: - set_unicode_input_mode(UC_OSX); - return false; - break; - } - return true; + switch(keycode) { + case QWERTZ: + if (record->event.pressed) { + set_single_persistent_default_layer(_QWZ); + } + return false; + break; + case QWERTY: + if (record->event.pressed) { + set_single_persistent_default_layer(_QWY); + } + return false; + break; + case GAMING: + if (record->event.pressed) { + set_single_persistent_default_layer(_GAM); + } + return false; + break; + case UNI_LNX: + set_unicode_input_mode(UC_LNX); + return false; + break; + case UNI_WIN: + set_unicode_input_mode(UC_WINC); + return false; + break; + case UNI_MAC: + set_unicode_input_mode(UC_OSX); + return false; + break; + } + return true; } diff --git a/keyboards/xd75/keymaps/markus/readme.md b/keyboards/xd75/keymaps/markus/readme.md index 92628124055..fc5959bcdc7 100644 --- a/keyboards/xd75/keymaps/markus/readme.md +++ b/keyboards/xd75/keymaps/markus/readme.md @@ -2,15 +2,15 @@ This keymap has three base layers (QWERTZ, QWERTY, Gaming) and three function layers (Fn1, Fn2, Fn3). -QWERTY is identical to QWERTZ except `z` and `y` are swapped. +QWERTY is identical to QWERTZ, except `z` and `y` are swapped. Gaming is a modified QWERTY layer for left-hand usage. The function layers contain: -* Symbols (standard and Unicode) +* Symbols +* Unicode characters (e.g. dashes, figure space, non-breaking space and hyphen) * Unicode input mode switches * Numpad * Function keys -* Media, mouse, LED control -* Non-breaking characters +* Media, mouse and LED controls diff --git a/keyboards/xd75/keymaps/markus/rules.mk b/keyboards/xd75/keymaps/markus/rules.mk index d0ed9a73ae1..22befc53496 100644 --- a/keyboards/xd75/keymaps/markus/rules.mk +++ b/keyboards/xd75/keymaps/markus/rules.mk @@ -1,23 +1,13 @@ -# Build Options -# change to "no" to disable the options, or define them in the Makefile in -# the appropriate keymap folder that will get included automatically -# -BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) -MOUSEKEY_ENABLE = yes # Mouse keys(+4700) -EXTRAKEY_ENABLE = yes # Audio control and System control(+450) -CONSOLE_ENABLE = no # Console for debug(+400) -COMMAND_ENABLE = no # Commands for debug and configuration -NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work -BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality -MIDI_ENABLE = no # MIDI controls -AUDIO_ENABLE = no # Audio output on port C6 -UNICODEMAP_ENABLE = no # This allows sending unicode symbols using X() in your keymap. -UNICODE_ENABLE = yes # Unicode -UCIS_ENABLE = no # Keep in mind that not all will work (See WinCompose for details on Windows). -BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID -RGBLIGHT_ENABLE = yes # Enable WS2812 RGB underlight. -API_SYSEX_ENABLE = no - -# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE -SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend - +BOOTMAGIC_ENABLE = no +MOUSEKEY_ENABLE = yes +EXTRAKEY_ENABLE = yes +CONSOLE_ENABLE = no +COMMAND_ENABLE = no +NKRO_ENABLE = yes +BACKLIGHT_ENABLE = no +MIDI_ENABLE = no +AUDIO_ENABLE = no +UNICODE_ENABLE = yes +BLUETOOTH_ENABLE = no +RGBLIGHT_ENABLE = yes +SLEEP_LED_ENABLE = no From 7fa854729c4391e5ae3b09e134eccd73f1307ac1 Mon Sep 17 00:00:00 2001 From: Salt-Peanuts Date: Fri, 19 Apr 2019 12:23:11 -0400 Subject: [PATCH 136/171] [Keymap] Added personal keymap to BFO-9000; cleaned up personal files in Kinesis and Rorschach (#5638) * Added personal keymap to BFO-9000; cleaned up personal Kinesis and Rorschach files Added personal keymap to BFO-9000; cleaned up personal Kinesis and Rorschach files * Update keymap.c * Update keymap.c * Update keymap.c * Update readme.md * Update readme.md * Update readme.md * Update readme.md * Update readme.md * Update readme.md --- .../keymaps/insertsnideremarks/config.h | 42 ++ .../keymaps/insertsnideremarks/keymap.c | 381 ++++++++++++++++++ .../keymaps/insertsnideremarks/rules.mk | 19 + .../keymaps/insertsnideremarks/config.h | 2 +- .../keymaps/insertsnideremarks/keymap.c | 9 +- .../keymaps/insertsnideremarks/rules.mk | 2 +- .../keymaps/insertsnideremarks/config.h | 2 +- .../keymaps/insertsnideremarks/keymap.c | 45 +-- .../keymaps/insertsnideremarks/readme.md | 64 +-- 9 files changed, 499 insertions(+), 67 deletions(-) create mode 100644 keyboards/keebio/bfo9000/keymaps/insertsnideremarks/config.h create mode 100644 keyboards/keebio/bfo9000/keymaps/insertsnideremarks/keymap.c create mode 100644 keyboards/keebio/bfo9000/keymaps/insertsnideremarks/rules.mk diff --git a/keyboards/keebio/bfo9000/keymaps/insertsnideremarks/config.h b/keyboards/keebio/bfo9000/keymaps/insertsnideremarks/config.h new file mode 100644 index 00000000000..344634063c7 --- /dev/null +++ b/keyboards/keebio/bfo9000/keymaps/insertsnideremarks/config.h @@ -0,0 +1,42 @@ +/* +This is the c configuration file for the keymap + +Copyright 2012 Jun Wako +Copyright 2015 Jack Humbert + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#pragma once + +/* Use I2C or Serial, not both */ + +// #define USE_SERIAL +#define USE_I2C + +/* Select hand configuration */ +// #define MASTER_LEFT +// #define MASTER_RIGHT +#define EE_HANDS + +#define IGNORE_MOD_TAP_INTERRUPT +#define TAPPING_TERM 150 +#define TAPPING_TOGGLE 2 + +// #undef RGBLED_NUM +// #define RGBLIGHT_ANIMATIONS +// #define RGBLED_NUM 12 +// #define RGBLIGHT_HUE_STEP 8 +// #define RGBLIGHT_SAT_STEP 8 +// #define RGBLIGHT_VAL_STEP 8 \ No newline at end of file diff --git a/keyboards/keebio/bfo9000/keymaps/insertsnideremarks/keymap.c b/keyboards/keebio/bfo9000/keymaps/insertsnideremarks/keymap.c new file mode 100644 index 00000000000..d15569ee964 --- /dev/null +++ b/keyboards/keebio/bfo9000/keymaps/insertsnideremarks/keymap.c @@ -0,0 +1,381 @@ +#include QMK_KEYBOARD_H + +extern keymap_config_t keymap_config; + +enum bfo9000_layers { + _COLEMAK, // Colemak (default layer) + _QWERTY, // Qwerty + _COLEMAKGM, // Colemak gaming/vanilla (limited dual-role keys with layer access) + _QWERTYGM, // QWERTY gaming/vanilla (limited dual-role keys with layer access) + _NUMBERS, // Numbers & Symbols + _NUMBERS2, // Numbers & Symbols 2 (identical as _NUMBERS; basically used for tri-layer access to _ADJUST) + _FUNCTION, // Function + _FUNCTION2, // Function 2 (identical as _FUNCTION; used to allow for easier use of space and backspace while using function layer arrows) + _NUMPAD, // Numpad + _ADJUST, // Adjust layer (accessed via tri-layer feature) + _ADJUST2 // Second Adjust layer (accessed outside of tri-layer feature) +}; + +enum bfo9000_keycodes { + COLEMAK = SAFE_RANGE, + QWERTY, + COLEMAKGM, + QWERTYGM, + NUMPAD = TG(_NUMPAD), + ADJUST = MO(_ADJUST2), + SPCFN = LT(_FUNCTION, KC_SPC), + BSPCFN = LT(_FUNCTION2, KC_BSPC), + ENTNS = LT(_NUMBERS, KC_ENT), + DELNS = LT(_NUMBERS2, KC_DEL), + CTLESC = CTL_T(KC_ESC), + ALTAPP = ALT_T(KC_APP), + NKROTG = MAGIC_TOGGLE_NKRO +}; + +//Tap Dance Declarations +enum { + ADJ = 0, + LBCB, + RBCB, + EQPL, + PLEQ, + MNUN, + SLAS, + GVTL, + PPLEQ, + PMNUN, + PSLPAS +}; + +void dance_LAYER_finished(qk_tap_dance_state_t *state, void *user_data) { + if (state->count == 2) { + layer_on(_ADJUST2); + set_oneshot_layer(_ADJUST2, ONESHOT_START); + } +} +void dance_LAYER_reset(qk_tap_dance_state_t *state, void *user_data) { + if (state->count == 2) { + layer_off(_ADJUST2); + clear_oneshot_layer_state(ONESHOT_PRESSED); + } +} + +qk_tap_dance_action_t tap_dance_actions[] = { +[ADJ] = ACTION_TAP_DANCE_FN_ADVANCED(NULL, dance_LAYER_finished, dance_LAYER_reset), // Double-tap to activate Adjust layer via oneshot layer +[LBCB] = ACTION_TAP_DANCE_DOUBLE(KC_LBRC, KC_LCBR), // Left bracket on a single-tap, left brace on a double-tap +[RBCB] = ACTION_TAP_DANCE_DOUBLE(KC_RBRC, KC_RCBR), // Right bracket on a single-tap, right brace on a double-tap +[EQPL] = ACTION_TAP_DANCE_DOUBLE(KC_EQL, KC_PLUS), // Plus sign on a single-tap, equal sign on a double-tap +[PLEQ] = ACTION_TAP_DANCE_DOUBLE(KC_PLUS, KC_EQL), // Equal sign on a single-tap, plus sign on a double-tap +[MNUN] = ACTION_TAP_DANCE_DOUBLE(KC_MINS, KC_UNDS), // Minus sign on a single-tap, underscore on a double-tap +[SLAS] = ACTION_TAP_DANCE_DOUBLE(KC_SLSH, KC_ASTR), // Slash in a single-tap, asterisk in a double-tap +[GVTL] = ACTION_TAP_DANCE_DOUBLE(KC_GRV, KC_TILD), // Grave on a single-tap, tilde on a double-tap +[PPLEQ] = ACTION_TAP_DANCE_DOUBLE(KC_PPLS, KC_EQL), // Numpad plus sign on a single-tap, equal sign on a double-tap +[PMNUN] = ACTION_TAP_DANCE_DOUBLE(KC_PMNS, KC_UNDS), // Numpad minus sign on a single-tap, underscore on a double-tap +[PSLPAS] = ACTION_TAP_DANCE_DOUBLE(KC_PSLS, KC_PAST) // Numpad slash on a single-tap, numpad asterisk on a double-tap +}; + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { +/* Colemak + (Default layer; keys separated by /: tap for first, hold for second; uses Space Cadet Shifts) + ,-----------------------------------------------------------------------. ,-----------------------------------------------------------------------. + | ESC | F1 | F2 | F3 | F4 | F5 | | | | | Adjust| | F12 | F6 | F7 | F8 | F9 | F10 | F11 | + |-------+-------+-------+-------+-------+-------+-------+-------+-------| |-------+-------+-------+-------+-------+-------+-------+-------+-------| + | = | 1 | 2 | 3 | 4 | 5 | | | | | Numpad| | | 6 | 7 | 8 | 9 | 0 | - | + |-------+-------+-------+-------+-------+-------+-------+-------+-------| |-------+-------+-------+-------+-------+-------+-------+-------+-------| + | Tab | Q | W | F | P | G | | | Home | | Pause | | | J | L | U | Y | ; | \ | + |-------+-------+-------+-------+-------+-------+-------+-------+-------| |-------+-------+-------+-------+-------+-------+-------+-------+-------| + |Esc/Ctl| A | R | S | T | D | | | PgUp | | ScrLck| | | H | N | E | I | O | ' | + |-------+-------+-------+-------+-------+-------+-------+-------+-------| |-------+-------+-------+-------+-------+-------+-------+-------+-------| + |SCShift| Z | X | C | V | B |Esc/Ctl|App/Alt| PgDn | | PrtScr| RAlt | RCtl | K | M | , | . | / |SCShift| + |-------+-------+-------+-------+-------+-------+-------+-------+-------| |-------+-------+-------+-------+-------+-------+-------+-------+-------| + | Ins | ` | [ | ] |App/Alt| Spc/Fn| Ent/NS| Bspc | End | | | Enter |Del/NS2|Bsp/Fn2| RGUI | Left | Down | Up | Right | + `-----------------------------------------------------------------------' `-----------------------------------------------------------------------' +*/ +[_COLEMAK] = LAYOUT( \ + KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, _______, _______, _______, ADJUST, _______, KC_F12, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, + KC_EQL, KC_1, KC_2, KC_3, KC_4, KC_5, _______, _______, _______, NUMPAD, _______, _______, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, + KC_TAB, KC_Q, KC_W, KC_F, KC_P, KC_G, _______, _______, KC_HOME, KC_PAUS, _______, _______, KC_J, KC_L, KC_U, KC_Y, KC_SCLN, KC_BSLS, + CTLESC, KC_A, KC_R, KC_S, KC_T, KC_D, _______, _______, KC_PGUP, KC_SLCK, _______, _______, KC_H, KC_N, KC_E, KC_I, KC_O, KC_QUOT, + KC_LSPO, KC_Z, KC_X, KC_C, KC_V, KC_B, CTLESC, ALTAPP, KC_PGDN, KC_PSCR, KC_RALT, KC_RCTL, KC_K, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSPC, + KC_INS, KC_GRV, KC_LBRC, KC_RBRC, ALTAPP, SPCFN, ENTNS, KC_BSPC, KC_END, _______, KC_ENT, DELNS, BSPCFN, KC_RGUI, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT +), + +/* QWERTY + (Keys separated by /: tap for first, hold for second; uses Space Cadet Shifts) + ,-----------------------------------------------------------------------. ,-----------------------------------------------------------------------. + | ESC | F1 | F2 | F3 | F4 | F5 | | | | | Adjust| | F12 | F6 | F7 | F8 | F9 | F10 | F11 | + |-------+-------+-------+-------+-------+-------+-------+-------+-------| |-------+-------+-------+-------+-------+-------+-------+-------+-------| + | = | 1 | 2 | 3 | 4 | 5 | | | | | Numpad| | | 6 | 7 | 8 | 9 | 0 | - | + |-------+-------+-------+-------+-------+-------+-------+-------+-------| |-------+-------+-------+-------+-------+-------+-------+-------+-------| + | Tab | Q | W | E | R | T | | | Home | | Pause | | | Y | U | I | O | P | \ | + |-------+-------+-------+-------+-------+-------+-------+-------+-------| |-------+-------+-------+-------+-------+-------+-------+-------+-------| + |Esc/Ctl| A | S | D | F | G | | | PgUp | | ScrLck| | | H | J | K | L | ; | ' | + |-------+-------+-------+-------+-------+-------+-------+-------+-------| |-------+-------+-------+-------+-------+-------+-------+-------+-------| + |SCShift| Z | X | C | V | B |Esc/Ctl|App/Alt| PgDn | | PrtScr| RAlt | RCtl | N | M | , | . | / |SCShift| + |-------+-------+-------+-------+-------+-------+-------+-------+-------| |-------+-------+-------+-------+-------+-------+-------+-------+-------| + | Ins | ` | [ | ] |App/Alt| Spc/Fn| Ent/NS| Bspc | End | | | Enter |Del/NS2|Bsp/Fn2| RGUI | Left | Down | Up | Right | + `-----------------------------------------------------------------------' `-----------------------------------------------------------------------' +*/ +[_QWERTY] = LAYOUT( \ + KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, ADJUST, _______, KC_F12, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, + KC_EQL, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, NUMPAD, _______, _______, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_HOME, KC_PAUS, _______, _______, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSLS, + CTLESC, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_PGUP, KC_SLCK, _______, _______, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, + KC_LSPO, KC_Z, KC_X, KC_C, KC_V, KC_B, CTLESC, ALTAPP, KC_PGDN, KC_PSCR, KC_RALT, KC_RCTL, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSPC, + KC_INS, KC_GRV, KC_LBRC, KC_RBRC, ALTAPP, SPCFN, ENTNS, KC_BSPC, KC_END, _______, KC_ENT, DELNS, BSPCFN, KC_RGUI, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT +), + +/* Numbers/Symbols layer + (Multiple characters: single-tap for first, double-tap for second) + ,-----------------------------------------------------------------------. ,-----------------------------------------------------------------------. + | | | | | | | | | | | | | | | | | | | | + |-------+-------+-------+-------+-------+-------+-------+-------+-------| |-------+-------+-------+-------+-------+-------+-------+-------+-------| + | F12 | F1 | F2 | F3 | F4 | F5 | | | | | | | | F6 | F7 | F8 | F9 | F10 | F12 | + |-------+-------+-------+-------+-------+-------+-------+-------+-------| |-------+-------+-------+-------+-------+-------+-------+-------+-------| + | | 6 | 7 | 8 | 9 | 0 | | | | | | | | ^ | & | * | ( | ) | | + |-------+-------+-------+-------+-------+-------+-------+-------+-------| |-------+-------+-------+-------+-------+-------+-------+-------+-------| + | | 1 | 2 | 3 | 4 | 5 | | | | | | | | ! | @ | # | $ | % | | + |-------+-------+-------+-------+-------+-------+-------+-------+-------| |-------+-------+-------+-------+-------+-------+-------+-------+-------| + | | | . | / * | - _ | + = | | | | | | | | ` ~ | [ { | ] } | | | | + |-------+-------+-------+-------+-------+-------+-------+-------+-------| |-------+-------+-------+-------+-------+-------+-------+-------+-------| + | ( | ) | [ { | ] } | | | | | | | | | | | | | | | | + `-----------------------------------------------------------------------' `-----------------------------------------------------------------------' +*/ +[_NUMBERS] = LAYOUT( \ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + KC_F12, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, _______, _______, _______, _______, _______, _______, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, + _______, KC_6, KC_7, KC_8, KC_9, KC_0, _______, _______, _______, _______, _______, _______, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, _______, + _______, KC_1, KC_2, KC_3, KC_4, KC_5, _______, _______, _______, _______, _______, _______, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, _______, + _______, _______, KC_DOT, TD(SLAS), TD(MNUN), TD(PLEQ), _______, _______, _______, _______, _______, _______, TD(GVTL), TD(LBCB), TD(RBCB), _______, _______, _______, + KC_LPRN, KC_RPRN, TD(LBCB), TD(RBCB), _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ +), + +[_NUMBERS2] = LAYOUT( \ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + KC_F12, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, _______, _______, _______, _______, _______, _______, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, + _______, KC_6, KC_7, KC_8, KC_9, KC_0, _______, _______, _______, _______, _______, _______, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, _______, + _______, KC_1, KC_2, KC_3, KC_4, KC_5, _______, _______, _______, _______, _______, _______, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, _______, + _______, _______, KC_DOT, TD(SLAS), TD(MNUN), TD(PLEQ), _______, _______, _______, _______, _______, _______, TD(GVTL), TD(LBCB), TD(RBCB), _______, _______, _______, + KC_LPRN, KC_RPRN, TD(LBCB), TD(RBCB), _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ +), + +/* Function layer + ,-----------------------------------------------------------------------. ,-----------------------------------------------------------------------. + | | | | | | | | | | | | | | | | | | | | + |-------+-------+-------+-------+-------+-------+-------+-------+-------| |-------+-------+-------+-------+-------+-------+-------+-------+-------| + | F12 | F1 | F2 | F3 | F4 | F5 | | | | | | | | F6 | F7 | F8 | F9 | F10 | F12 | + |-------+-------+-------+-------+-------+-------+-------+-------+-------| |-------+-------+-------+-------+-------+-------+-------+-------+-------| + | | | | Up | | | | | | | | | | | | Up | Ctrl+Y| | | + |-------+-------+-------+-------+-------+-------+-------+-------+-------| |-------+-------+-------+-------+-------+-------+-------+-------+-------| + | | Ctrl+A| Left | Down | Right | C+A+Tb| | | | | | | | PgUp | Right | Down | Left | Home | | + |-------+-------+-------+-------+-------+-------+-------+-------+-------| |-------+-------+-------+-------+-------+-------+-------+-------+-------| + | | Ctrl+Z| Ctrl+X| Ctrl+C| Ctrl+V| Bspc | | | | | | | | PgDn | Mute | Vol- | Vol+ | End | | + |-------+-------+-------+-------+-------+-------+-------+-------+-------| |-------+-------+-------+-------+-------+-------+-------+-------+-------| + | | | | | | | | | | | | | | | | Prev | Play | Next | Stop | + `-----------------------------------------------------------------------' `-----------------------------------------------------------------------' +*/ +[_FUNCTION] = LAYOUT( + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + KC_F12, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, _______, _______, _______, _______, _______, _______, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, + _______, _______, _______, KC_UP, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_UP, LCTL(KC_Y), _______, _______, + _______, LCTL(KC_A), KC_LEFT, KC_DOWN, KC_RGHT, LCA(KC_TAB), _______, _______, _______, _______, _______, _______, KC_PGUP, KC_LEFT, KC_DOWN, KC_RGHT, KC_HOME, _______, + _______, LCTL(KC_Z), LCTL(KC_X), LCTL(KC_C), LCTL(KC_V), KC_BSPC, _______, _______, _______, _______, _______, _______, KC_PGDN, KC_MUTE, KC_VOLD, KC_VOLU, KC_END, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_MPRV, KC_MPLY, KC_MNXT, KC_MSTP +), + +[_FUNCTION2] = LAYOUT( + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + KC_F12, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, _______, _______, _______, _______, _______, _______, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, + _______, _______, _______, KC_UP, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_UP, LCTL(KC_Y), _______, _______, + _______, LCTL(KC_A), KC_LEFT, KC_DOWN, KC_RGHT, LCA(KC_TAB), _______, _______, _______, _______, _______, _______, KC_PGUP, KC_LEFT, KC_DOWN, KC_RGHT, KC_HOME, _______, + _______, LCTL(KC_Z), LCTL(KC_X), LCTL(KC_C), LCTL(KC_V), KC_BSPC, _______, _______, _______, _______, _______, _______, KC_PGDN, KC_MUTE, KC_VOLD, KC_VOLU, KC_END, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_MPRV, KC_MPLY, KC_MNXT, KC_MSTP +), + +/* Numpad layer + (Left side duplicates layout from the Numbers layer, just with numpad output; right side layout close to PC numpad layout) + ,-----------------------------------------------------------------------. ,-----------------------------------------------------------------------. + | | | | | | | | | | | | | | | | | | | | + |-------+-------+-------+-------+-------+-------+-------+-------+-------| |-------+-------+-------+-------+-------+-------+-------+-------+-------| + | | NumLk | | | | | | | | | | | Tab | NumLk | KP / | KP * | KP - | | | + |-------+-------+-------+-------+-------+-------+-------+-------+-------| |-------+-------+-------+-------+-------+-------+-------+-------+-------| + | | KP 6 | KP 7 | KP 8 | KP 9 | KP 0 | | | | | | | | KP 7 | KP 8 | KP 9 | KP + | | | + |-------+-------+-------+-------+-------+-------+-------+-------+-------| |-------+-------+-------+-------+-------+-------+-------+-------+-------| + | | KP 1 | KP 2 | KP 3 | KP 4 | KP 5 | | | | | | | | KP 4 | KP 5 | KP 6 | = | | | + |-------+-------+-------+-------+-------+-------+-------+-------+-------| |-------+-------+-------+-------+-------+-------+-------+-------+-------| + | | | KP . |KP/ KP*| KP- _ | KP+ = | | | | | | | | KP 1 | KP 2 | KP 3 | KP Ent| | | + |-------+-------+-------+-------+-------+-------+-------+-------+-------| |-------+-------+-------+-------+-------+-------+-------+-------+-------| + | ( | ) | [ { | ] } | | | | | | | | | | | KP 0 | KP . | KP Ent| | | + `-----------------------------------------------------------------------' `-----------------------------------------------------------------------' +*/ +[_NUMPAD] = LAYOUT( \ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, KC_NLCK, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_TAB, KC_NLCK, KC_PSLS, KC_PAST, KC_PMNS, _______, + _______, KC_P6, KC_P7, KC_P8, KC_P9, KC_P0, _______, _______, _______, _______, _______, _______, _______, KC_P7, KC_P8, KC_P9, KC_PPLS, _______, + _______, KC_P1, KC_P2, KC_P3, KC_P4, KC_P5, _______, _______, _______, _______, _______, _______, _______, KC_P4, KC_P5, KC_P6, KC_EQL, _______, + _______, _______, KC_PDOT, TD(PSLPAS), TD(PMNUN), TD(PPLEQ), _______, _______, _______, _______, _______, _______, _______, KC_P1, KC_P2, KC_P3, KC_PENT, _______, + KC_LPRN, KC_RPRN, TD(LBCB), TD(RBCB), _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_P0, KC_PDOT, KC_PENT, _______ +), + +/* Colemak gaming/vanilla + (Limited access to Function or Numbers layers; mainly used for gaming; Ent/NS + Del/NS2 on right side to access Adjust layer) + ,-----------------------------------------------------------------------. ,-----------------------------------------------------------------------. + | ESC | F1 | F2 | F3 | F4 | F5 | F6 | F7 | F8 | | Adjust| | F12 | F6 | F7 | F8 | F9 | F10 | F11 | + |-------+-------+-------+-------+-------+-------+-------+-------+-------| |-------+-------+-------+-------+-------+-------+-------+-------+-------| + | = | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | | Numpad| | | 6 | 7 | 8 | 9 | 0 | - | + |-------+-------+-------+-------+-------+-------+-------+-------+-------| |-------+-------+-------+-------+-------+-------+-------+-------+-------| + | Tab | Q | W | F | P | G | J | L | Home | | Pause | | | J | L | U | Y | ; | \ | + |-------+-------+-------+-------+-------+-------+-------+-------+-------| |-------+-------+-------+-------+-------+-------+-------+-------+-------| + | LCtl | A | R | S | T | D | H | N | PgUp | | ScrLck| | | H | N | E | I | O | ' | + |-------+-------+-------+-------+-------+-------+-------+-------+-------| |-------+-------+-------+-------+-------+-------+-------+-------+-------| + | Shift | Z | X | C | V | B | Esc | LAlt | PgDn | | PrtScr| RAlt | RCtl | K | M | , | . | / | Shift | + |-------+-------+-------+-------+-------+-------+-------+-------+-------| |-------+-------+-------+-------+-------+-------+-------+-------+-------| + | Ins | ` | [ | ] | LAlt | Space | Enter | Bspc | End | | | Ent/NS|Del/NS2|Bsp/Fn2| RGUI | Left | Down | Up | Right | + `-----------------------------------------------------------------------' `-----------------------------------------------------------------------' +*/ +[_COLEMAKGM] = LAYOUT( \ + KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, ADJUST, _______, KC_F12, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, + KC_EQL, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, NUMPAD, _______, _______, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, + KC_TAB, KC_Q, KC_W, KC_F, KC_P, KC_G, KC_J, KC_L, KC_HOME, KC_PAUS, _______, _______, KC_J, KC_L, KC_U, KC_Y, KC_SCLN, KC_BSLS, + KC_LCTL, KC_A, KC_R, KC_S, KC_T, KC_D, KC_H, KC_N, KC_PGUP, KC_SLCK, _______, _______, KC_H, KC_N, KC_E, KC_I, KC_O, KC_QUOT, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_ESC, KC_LALT, KC_PGDN, KC_PSCR, KC_RALT, KC_RCTL, KC_K, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, + KC_INS, KC_GRV, KC_LBRC, KC_RBRC, KC_LALT, KC_SPC, KC_ENT, KC_BSPC, KC_END, _______, ENTNS, DELNS, BSPCFN, KC_RGUI, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT +), + +/* QWERTY gaming/vanilla + (Limited access to Function or Numbers layers; mainly used for gaming; Ent/NS + Del/NS2 on right side to access Adjust layer) + ,-----------------------------------------------------------------------. ,-----------------------------------------------------------------------. + | ESC | F1 | F2 | F3 | F4 | F5 | F6 | F7 | F8 | | Adjust| | F12 | F6 | F7 | F8 | F9 | F10 | F11 | + |-------+-------+-------+-------+-------+-------+-------+-------+-------| |-------+-------+-------+-------+-------+-------+-------+-------+-------| + | = | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | | Numpad| | | 6 | 7 | 8 | 9 | 0 | - | + |-------+-------+-------+-------+-------+-------+-------+-------+-------| |-------+-------+-------+-------+-------+-------+-------+-------+-------| + | Tab | Q | W | E | T | Y | U | I | Home | | Pause | | | Y | U | I | O | P | \ | + |-------+-------+-------+-------+-------+-------+-------+-------+-------| |-------+-------+-------+-------+-------+-------+-------+-------+-------| + | LCtl | A | S | D | F | G | H | J | PgUp | | ScrLck| | | H | J | K | L | ; | ' | + |-------+-------+-------+-------+-------+-------+-------+-------+-------| |-------+-------+-------+-------+-------+-------+-------+-------+-------| + | Shift | Z | X | C | V | B | Esc | LAlt | PgDn | | PrtScr| RAlt | RCtl | N | M | , | . | / | Shift | + |-------+-------+-------+-------+-------+-------+-------+-------+-------| |-------+-------+-------+-------+-------+-------+-------+-------+-------| + | Ins | ` | [ | ] | LAlt | Space | Enter | Bspc | End | | | Ent/NS|Del/NS2|Bsp/Fn2| RGUI | Left | Down | Up | Right | + `-----------------------------------------------------------------------' `-----------------------------------------------------------------------' +*/ +[_QWERTYGM] = LAYOUT( \ + KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, ADJUST, _______, KC_F12, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, + KC_EQL, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, NUMPAD, _______, _______, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_HOME, KC_PAUS, _______, _______, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSLS, + KC_LCTL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_PGUP, KC_SLCK, _______, _______, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_ESC, KC_LALT, KC_PGDN, KC_PSCR, KC_RALT, KC_RCTL, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, + KC_INS, KC_GRV, KC_LBRC, KC_RBRC, KC_LALT, KC_SPC, KC_ENT, KC_BSPC, KC_END, _______, ENTNS, DELNS, BSPCFN, KC_RGUI, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT +), + +/* Adjust layer + (Enter/Number + Delete/Number2 under non-gaming/vanilla layers or press & hold Adjust key on function row; Numpad is a toggle) + ,-----------------------------------------------------------------------. ,-----------------------------------------------------------------------. + | | | | | | | | | | | | | | | | | | | | + |-------+-------+-------+-------+-------+-------+-------+-------+-------| |-------+-------+-------+-------+-------+-------+-------+-------+-------| + | |Colemak| Qwerty| |ColmkGM| QWGM | | | | | | | | Numpad| | | | | RESET | + |-------+-------+-------+-------+-------+-------+-------+-------+-------| |-------+-------+-------+-------+-------+-------+-------+-------+-------| + | | | | | | | | | | | | | | | | | | | | + |-------+-------+-------+-------+-------+-------+-------+-------+-------| |-------+-------+-------+-------+-------+-------+-------+-------+-------| + | | | | | | | | | | | | | | | NKROTG| | | | | + |-------+-------+-------+-------+-------+-------+-------+-------+-------| |-------+-------+-------+-------+-------+-------+-------+-------+-------| + | | | | | | | | | | | | | | | | | | | | + |-------+-------+-------+-------+-------+-------+-------+-------+-------| |-------+-------+-------+-------+-------+-------+-------+-------+-------| + | | | | | | | | | | | | | | | | | | | | + `-----------------------------------------------------------------------' `-----------------------------------------------------------------------' +*/ +[_ADJUST] = LAYOUT( + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, COLEMAK, QWERTY, _______, COLEMAKGM, QWERTYGM, _______, _______, _______, _______, _______, _______, NUMPAD, _______, _______, _______, _______, RESET, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, NKROTG, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ +), + +[_ADJUST2] = LAYOUT( + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, COLEMAK, QWERTY, _______, COLEMAKGM, QWERTYGM, _______, _______, _______, _______, _______, _______, NUMPAD, _______, _______, _______, _______, RESET, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, NKROTG, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ +) + +}; + + +uint32_t layer_state_set_user(uint32_t state) { + return update_tri_layer_state(state, _NUMBERS, _NUMBERS2, _ADJUST); +} + +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + switch (keycode) { + case COLEMAK: + if (record->event.pressed) { + default_layer_set(1UL << _COLEMAK); +// persistent_default_layer_set(1UL << _COLEMAK); + layer_off ( _QWERTY); + layer_off ( _NUMBERS); + layer_off ( _NUMBERS2); + layer_off ( _FUNCTION); + layer_off ( _FUNCTION2); + layer_off ( _NUMPAD); + layer_off ( _COLEMAKGM); + layer_off ( _QWERTYGM); + layer_off ( _ADJUST); + layer_off ( _ADJUST2); + } + return false; + break; + case QWERTY: + if (record->event.pressed) { + default_layer_set(1UL << _QWERTY); +// persistent_default_layer_set(1UL << _QWERTY); + layer_off ( _COLEMAK); + layer_off ( _NUMBERS); + layer_off ( _NUMBERS2); + layer_off ( _FUNCTION); + layer_off ( _FUNCTION2); + layer_off ( _NUMPAD); + layer_off ( _COLEMAKGM); + layer_off ( _QWERTYGM); + layer_off ( _ADJUST); + layer_off ( _ADJUST2); + } + return false; + break; + case COLEMAKGM: + if (record->event.pressed) { + default_layer_set(1UL << _COLEMAKGM); + layer_off ( _QWERTY); + layer_off ( _COLEMAK); + layer_off ( _NUMBERS); + layer_off ( _NUMBERS2); + layer_off ( _FUNCTION); + layer_off ( _FUNCTION2); + layer_off ( _NUMPAD); + layer_off ( _QWERTYGM); + layer_off ( _ADJUST); + layer_off ( _ADJUST2); + } + return false; + break; + case QWERTYGM: + if (record->event.pressed) { + default_layer_set(1UL << _QWERTYGM); + layer_off ( _QWERTY); + layer_off ( _COLEMAK); + layer_off ( _NUMBERS); + layer_off ( _NUMBERS2); + layer_off ( _FUNCTION); + layer_off ( _FUNCTION2); + layer_off ( _NUMPAD); + layer_off ( _COLEMAKGM); + layer_off ( _ADJUST); + layer_off ( _ADJUST2); + } + return false; + break; + } + return true; +} diff --git a/keyboards/keebio/bfo9000/keymaps/insertsnideremarks/rules.mk b/keyboards/keebio/bfo9000/keymaps/insertsnideremarks/rules.mk new file mode 100644 index 00000000000..cf63c44f4f0 --- /dev/null +++ b/keyboards/keebio/bfo9000/keymaps/insertsnideremarks/rules.mk @@ -0,0 +1,19 @@ +# Build Options +# change to "no" to disable the options, or define them in the Makefile in +# the appropriate keymap folder that will get included automatically +# + +BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = yes # Mouse keys(+4700) +EXTRAKEY_ENABLE = yes # Audio control and System control(+450) +CONSOLE_ENABLE = yes # Console for debug(+400) +COMMAND_ENABLE = no # Commands for debug and configuration +NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +MIDI_ENABLE = no # MIDI controls +AUDIO_ENABLE = no # Audio output on port C6 +UNICODE_ENABLE = yes # Unicode +BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID +RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend +TAP_DANCE_ENABLE = yes # Enable Tap Dancing function diff --git a/keyboards/keebio/rorschach/keymaps/insertsnideremarks/config.h b/keyboards/keebio/rorschach/keymaps/insertsnideremarks/config.h index 2048232c9c3..ed948a4b3bb 100644 --- a/keyboards/keebio/rorschach/keymaps/insertsnideremarks/config.h +++ b/keyboards/keebio/rorschach/keymaps/insertsnideremarks/config.h @@ -12,7 +12,7 @@ #define EE_HANDS #define IGNORE_MOD_TAP_INTERRUPT -#define TAPPING_TERM 175 +#define TAPPING_TERM 150 #define TAPPING_TOGGLE 2 // #undef RGBLED_NUM diff --git a/keyboards/keebio/rorschach/keymaps/insertsnideremarks/keymap.c b/keyboards/keebio/rorschach/keymaps/insertsnideremarks/keymap.c index 81c163a028f..e345ce4a383 100644 --- a/keyboards/keebio/rorschach/keymaps/insertsnideremarks/keymap.c +++ b/keyboards/keebio/rorschach/keymaps/insertsnideremarks/keymap.c @@ -246,16 +246,11 @@ uint32_t layer_state_set_user(uint32_t state) { return update_tri_layer_state(state, _NUMBERS, _NUMBERS2, _ADJUST); } -void persistent_default_layer_set(uint16_t default_layer) { - eeconfig_update_default_layer(default_layer); - default_layer_set(default_layer); -} - bool process_record_user(uint16_t keycode, keyrecord_t *record) { switch (keycode) { case COLEMAK: if (record->event.pressed) { - persistent_default_layer_set(1UL << _COLEMAK); + default_layer_set(1UL << _COLEMAK); layer_off ( _QWERTY); layer_off ( _NUMBERS); layer_off ( _NUMBERS2); @@ -269,7 +264,7 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) { break; case QWERTY: if (record->event.pressed) { - persistent_default_layer_set(1UL << _QWERTY); + default_layer_set(1UL << _QWERTY); layer_off ( _COLEMAK); layer_off ( _NUMBERS); layer_off ( _NUMBERS2); diff --git a/keyboards/keebio/rorschach/keymaps/insertsnideremarks/rules.mk b/keyboards/keebio/rorschach/keymaps/insertsnideremarks/rules.mk index b9e39c05393..cf63c44f4f0 100644 --- a/keyboards/keebio/rorschach/keymaps/insertsnideremarks/rules.mk +++ b/keyboards/keebio/rorschach/keymaps/insertsnideremarks/rules.mk @@ -4,7 +4,7 @@ # BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) -MOUSEKEY_ENABLE = no # Mouse keys(+4700) +MOUSEKEY_ENABLE = yes # Mouse keys(+4700) EXTRAKEY_ENABLE = yes # Audio control and System control(+450) CONSOLE_ENABLE = yes # Console for debug(+400) COMMAND_ENABLE = no # Commands for debug and configuration diff --git a/keyboards/kinesis/keymaps/insertsnideremarks/config.h b/keyboards/kinesis/keymaps/insertsnideremarks/config.h index 9ce094be516..053a291b7c6 100644 --- a/keyboards/kinesis/keymaps/insertsnideremarks/config.h +++ b/keyboards/kinesis/keymaps/insertsnideremarks/config.h @@ -6,7 +6,7 @@ // place overrides here #define IGNORE_MOD_TAP_INTERRUPT -#define TAPPING_TERM 175 +#define TAPPING_TERM 150 #define TAPPING_TOGGLE 2 diff --git a/keyboards/kinesis/keymaps/insertsnideremarks/keymap.c b/keyboards/kinesis/keymaps/insertsnideremarks/keymap.c index 7f328b4f0e9..10b0c2cb73d 100644 --- a/keyboards/kinesis/keymaps/insertsnideremarks/keymap.c +++ b/keyboards/kinesis/keymaps/insertsnideremarks/keymap.c @@ -1,4 +1,4 @@ -#include QMK_KEYBOARD_H +#include QMK_KEYBOARD_H extern keymap_config_t keymap_config; @@ -147,7 +147,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { SPCFN, ENTNS, KC_BSPC, KC_ENT, DELNS, BSPCFN ), -/* Number/symbol layer +/* Numbers/Symbols layer (Multiple characters: single-tap for first, double-tap for second) ,-----------------------------------------------------------------------------------------------------------. | | | | | | | | | | | | | | | | | | | @@ -256,7 +256,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { |--------+------+------+------+------+------| |------+------+------+------+------+--------| | | | KP . |KP/KP*| KP- _| KP+ =| | | KP 1 | KP 2 | KP 3 |KP Ent| | `--------+------+------+------+------+------' `------+------+------+------+------+--------' - | ( | ) | [ { | ] } | | KP 0 | , | KP . |KP Ent| + | ( | ) | [ { | ] } | | | KP 0 | KP . |KP Ent| `---------------------------' `---------------------------' ,---------------. ,---------------. | | | | | | @@ -272,14 +272,14 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { _______, KC_P6, KC_P7, KC_P8, KC_P9, KC_P0, _______, KC_P7, KC_P8, KC_P9, KC_PPLS, _______, _______, KC_P1, KC_P2, KC_P3, KC_P4, KC_P5, _______, KC_P4, KC_P5, KC_P6, KC_EQL, _______, _______, _______, KC_PDOT, TD(PSLPAS), TD(PMNUN), TD(PPLEQ), _______, KC_P1, KC_P2, KC_P3, KC_PENT, _______, - KC_LPRN, KC_RPRN, TD(LBCB), TD(RBCB), KC_P0, KC_COMM, KC_PDOT, KC_PENT, + KC_LPRN, KC_RPRN, TD(LBCB), TD(RBCB), _______, KC_P0, KC_PDOT, KC_PENT, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ ), /* Colemak gaming/vanilla - (Limited access to Function or Numbers layers; mainly used for gaming; double-tap and hold TD(ADJ) above LAlt to access Adjust layer) + (Limited access to Function or Numbers layers; mainly used for gaming; Ent/NS + Delete/Numbers2 to access Adjust layer) ,-----------------------------------------------------------------------------------------------------------. | ESC | F1 | F2 | F3 | F4 | F5 | F6 | F7 | F8 | F9 | F10 | F11 | F12 | PScr| SLck| Paus|Numpd|Adjst| `-----------------------------------------------------------------------------------------------------------' @@ -288,18 +288,18 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { |--------+------+------+------+------+------| |------+------+------+------+------+--------| | Tab | Q | W | F | P | G | | J | L | U | Y | ; | \ | |--------+------+------+------+------+------| |------+------+------+------+------+--------| - | Ctrl | A | R | S | T | D | | H | N | E | I | O | ' | + | LCtrl | A | R | S | T | D | | H | N | E | I | O | ' | |--------+------+------+------+------+------| |------+------+------+------+------+--------| | Shift | Z | X | C | V | B | | K | M | , | . | / | Shift | `--------+------+------+------+------+------' `------+------+------+------+------+--------' | Ins | ` | [ | ] | | Left | Down | Up | Right| `---------------------------' `---------------------------' ,---------------. ,---------------. - |Esc/Ctl|TD(ADJ)| | RAlt | RCtl | + | Esc | | | RAlt | RCtl | ,-------|-------|-------| |-------+-------+-------. - | | | LAlt | | RGUI | | | - | Space | Enter |-------| |-------| Delete| Bspc | - | | |Bspc/FN| | Ent/NS| | | + | | | LAlt | | RGUI | Delete| Bspc | + | Space | Enter |-------| |-------| / | / | + | | | Bspc | | Ent/NS|Number2| Fn2 | `-----------------------' `-----------------------' */ [_COLEMAKGM] = LAYOUT_pretty( @@ -309,13 +309,13 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { KC_LCTL, KC_A, KC_R, KC_S, KC_T, KC_D, KC_H, KC_N, KC_E, KC_I, KC_O, KC_QUOT, KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_K, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_INS, KC_GRV, KC_LBRC, KC_RBRC, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT, - CTLESC, TD(ADJ), KC_RALT, KC_RCTL, + KC_ESC, XXXXXXX, KC_RALT, KC_RCTL, KC_LALT, KC_RGUI, - KC_SPC, KC_ENT, BSPCFN, ENTNS, KC_DEL, KC_BSPC + KC_SPC, KC_ENT, KC_BSPC, ENTNS, DELNS, BSPCFN ), /* QWERTY gaming/vanilla - (Limited access to Function or Numbers layers; mainly used for gaming; double-tap and hold TD(ADJ) above LAlt to access Adjust layer) + (Limited access to Function or Numbers layers; mainly used for gaming; Ent/NS + Delete/Numbers2 to access Adjust layer) ,-----------------------------------------------------------------------------------------------------------. | ESC | F1 | F2 | F3 | F4 | F5 | F6 | F7 | F8 | F9 | F10 | F11 | F12 | PScr| SLck| Paus|Numpd|Adjst| `-----------------------------------------------------------------------------------------------------------' @@ -324,18 +324,18 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { |--------+------+------+------+------+------| |------+------+------+------+------+--------| | Tab | Q | W | E | R | T | | Y | U | I | O | P | \ | |--------+------+------+------+------+------| |------+------+------+------+------+--------| - | Ctrl | A | S | D | F | G | | H | J | K | L | ; | ' | + | LCtrl | A | S | D | F | G | | H | J | K | L | ; | ' | |--------+------+------+------+------+------| |------+------+------+------+------+--------| | Shift | Z | X | C | V | B | | N | M | , | . | / | Shift | `--------+------+------+------+------+------' `------+------+------+------+------+--------' | Ins | ` | [ | ] | | Left | Down | Up | Right| `---------------------------' `---------------------------' ,---------------. ,---------------. - |Esc/Ctl|TD(ADJ)| | RAlt | RCtl | + | Esc | | | RAlt | RCtl | ,-------|-------|-------| |-------+-------+-------. - | | | LAlt | | RGUI | | | - | Space | Enter |-------| |-------| Delete| Bspc | - | | |Bspc/FN| | Ent/NS| | | + | | | LAlt | | RGUI | Delete| Bspc | + | Space | Enter |-------| |-------| / | / | + | | | Bspc | | Ent/NS|Number2| Fn2 | `-----------------------' `-----------------------' */ [_QWERTYGM] = LAYOUT_pretty( @@ -345,9 +345,9 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { KC_LCTL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_INS, KC_GRV, KC_LBRC, KC_RBRC, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT, - CTLESC, TD(ADJ), KC_RALT, KC_RCTL, + KC_ESC, XXXXXXX, KC_RALT, KC_RCTL, KC_LALT, KC_RGUI, - KC_SPC, KC_ENT, BSPCFN, ENTNS, KC_DEL, KC_BSPC + KC_SPC, KC_ENT, KC_BSPC, ENTNS, DELNS, BSPCFN ), /* Adjust layer @@ -404,11 +404,6 @@ uint32_t layer_state_set_user(uint32_t state) { return update_tri_layer_state(state, _NUMBERS, _NUMBERS2, _ADJUST); } -void persistent_default_layer_set(uint16_t default_layer) { - eeconfig_update_default_layer(default_layer); - default_layer_set(default_layer); -} - bool process_record_user(uint16_t keycode, keyrecord_t *record) { switch (keycode) { case COLEMAK: diff --git a/keyboards/kinesis/keymaps/insertsnideremarks/readme.md b/keyboards/kinesis/keymaps/insertsnideremarks/readme.md index 7a146c7a292..4c8fb153c57 100644 --- a/keyboards/kinesis/keymaps/insertsnideremarks/readme.md +++ b/keyboards/kinesis/keymaps/insertsnideremarks/readme.md @@ -1,6 +1,6 @@ # insertsnideremarks' Kinesis Keymap -These layouts are derived from what I was using on my Kinesis Contoured keyboards with Hasu's TMK converters. With the move to QMK via Stapelberg replacement controller, I've cleaned up the layouts a bit while adding more functions and layers. +These layouts are derived from what I was using on my Kinesis Contoured keyboards with Hasu's USB-USB TMK converters. With the move to QMK via Stapelberg replacement controller, I've cleaned up the layouts a bit while adding more functions and layers. There are minor changes in the base keywell layout of non-alpha keys (e.g., CapsLock is ESC/Ctl, arrow clusters on one side), while the thumb clusters deviate more from the default layout. @@ -10,36 +10,36 @@ Changes to the thumb clusters include: * Backspace have been duplicated on both clusters. * The 2u keys serve dual function as momentary layer switchers. -I've largely left the function keys untouched, with the intension of not using them. They are neither easy to use nor reach due to their locations and size, and, prior to Advantage2, particularly terrible rubber domes were used. They have since updated the keys with Cherry ML switches on Advantage2, but did not resolve the issues of size or location. Additionally, leaving the function keys unused here makes it easier for me to adapt the keymaps to my other keyboards, most of which do not have physical function keys. +I've largely left the function keys untouched, with the intension of not using them. They are neither easy to use nor reach due to their locations and size, and the rubber domes used were terrible. They have since replaced the keys with Cherry ML switches on Advantage2, but did not resolve the issues of size or location. Additionally, leaving the function keys unused here makes it easier for me to adapt the keymaps to my other keyboards, most of which do not have physical function keys. I use Colemak as my default layout. I've included QWERTY here as well. -Additionally, I've added gaming/vanilla version of Colemak and QWERTY layouts. These layouts have limited access to the Function or Numbers layers, and are mainly used for gaming. +Additionally, I've added gaming/vanilla version of Colemak and QWERTY layouts. These layouts have limited access to the Function or Numbers/Symbols layers, and are mainly used for gaming. Persistent default layer has been enabled for Colemak and QWERTY. The gaming/vanilla Colemak and QWERTY can be set as default layer, but will not be persistent. ## Future plans -* Add status LEDs to the Stapelberg PCB (usually used for Caps Lock, Num Lock, and Scroll Lock). May configure it as layer indicator. +* Add status LEDs to the Stapelberg PCB (usually used for Caps Lock, Num Lock, and Scroll Lock) to use as layer indicators. * Add a speaker now that QMK supports additional pins for audio use. -* Utilize the leftover spots on the key matrix, as well as unused pins on Teensy to run macropad and/or foot pedals. +* Utilize the leftover spots on the key matrix, as well as unused pins on Teensy++ 2.0 to run macropad and/or foot pedals. ### Colemak - (Default layer, keys separated by /: tap for first, hold for second; uses Space Cadet Shifts) - ,-----------------------------------------------------------------------------------------------------------. - | ESC | F1 | F2 | F3 | F4 | F5 | F6 | F7 | F8 | F9 | F10 | F11 | F12 | PScr| SLck| Paus|Numpd|Adjst| - `-----------------------------------------------------------------------------------------------------------' - ,-------------------------------------------. ,-------------------------------------------. - | = | 1 | 2 | 3 | 4 | 5 | | 6 | 7 | 8 | 9 | 0 | - | - |--------+------+------+------+------+------| |------+------+------+------+------+--------| - | Tab | Q | W | F | P | G | | J | L | U | Y | ; | \ | - |--------+------+------+------+------+------| |------+------+------+------+------+--------| - |Esc/Ctrl| A | R | S | T | D | | H | N | E | I | O | ' | - |--------+------+------+------+------+------| |------+------+------+------+------+--------| - |SC Shift| Z | X | C | V | B | | K | M | , | . | / |SC Shift| - `--------+------+------+------+------+------' `------+------+------+------+------+--------' - | Ins | ` | [ | ] | | Left | Down | Up | Right| + (Default layer; keys separated by /: tap for first, hold for second; uses Space Cadet Shifts) + ,-----------------------------------------------------------------------------------------------------------. + | ESC | F1 | F2 | F3 | F4 | F5 | F6 | F7 | F8 | F9 | F10 | F11 | F12 | PScr| SLck| Paus|Numpd|Adjst| + `-----------------------------------------------------------------------------------------------------------' + ,-------------------------------------------. ,-------------------------------------------. + | = | 1 | 2 | 3 | 4 | 5 | | 6 | 7 | 8 | 9 | 0 | - | + |--------+------+------+------+------+------| |------+------+------+------+------+--------| + | Tab | Q | W | F | P | G | | J | L | U | Y | ; | \ | + |--------+------+------+------+------+------| |------+------+------+------+------+--------| + |Esc/Ctrl| A | R | S | T | D | | H | N | E | I | O | ' | + |--------+------+------+------+------+------| |------+------+------+------+------+--------| + |SC Shift| Z | X | C | V | B | | K | M | , | . | / |SC Shift| + `--------+------+------+------+------+------' `------+------+------+------+------+--------' + | Ins | ` | [ | ] | | Left | Down | Up | Right| `---------------------------' `---------------------------' ,---------------. ,---------------. |Esc/Ctl| Hyper | | RAlt | RCtl | @@ -150,7 +150,7 @@ Persistent default layer has been enabled for Colemak and QWERTY. The gaming/va ### Colemak gaming/vanilla - (Limited access to Function or Numbers layers; mainly used for gaming; double-tap and hold TD(ADJ) above LAlt to access Adjust layer) + (Limited access to Function or Numbers layers; mainly used for gaming; Ent/NS + Delete/Numbers2 to access Adjust layer) ,-----------------------------------------------------------------------------------------------------------. | ESC | F1 | F2 | F3 | F4 | F5 | F6 | F7 | F8 | F9 | F10 | F11 | F12 | PScr| SLck| Paus|Numpd|Adjst| `-----------------------------------------------------------------------------------------------------------' @@ -159,23 +159,23 @@ Persistent default layer has been enabled for Colemak and QWERTY. The gaming/va |--------+------+------+------+------+------| |------+------+------+------+------+--------| | Tab | Q | W | F | P | G | | J | L | U | Y | ; | \ | |--------+------+------+------+------+------| |------+------+------+------+------+--------| - | Ctrl | A | R | S | T | D | | H | N | E | I | O | ' | + | LCtrl | A | R | S | T | D | | H | N | E | I | O | ' | |--------+------+------+------+------+------| |------+------+------+------+------+--------| | Shift | Z | X | C | V | B | | K | M | , | . | / | Shift | `--------+------+------+------+------+------' `------+------+------+------+------+--------' | Ins | ` | [ | ] | | Left | Down | Up | Right| `---------------------------' `---------------------------' ,---------------. ,---------------. - |Esc/Ctl|TD(ADJ)| | RAlt | RCtl | + | Esc | | | RAlt | RCtl | ,-------|-------|-------| |-------+-------+-------. - | | | LAlt | | RGUI | | | - | Space | Enter |-------| |-------| Delete| Bspc | - | | |Bspc/FN| | Ent/NS| | | + | | | LAlt | | RGUI | Delete| Bspc | + | Space | Enter |-------| |-------| / | / | + | | | Bspc | | Ent/NS|Number2| Fn2 | `-----------------------' `-----------------------' ### QWERTY gaming/vanilla - (Limited access to Function or Numbers layers; mainly used for gaming; double-tap and hold TD(ADJ) above LAlt to access Adjust layer) + (Limited access to Function or Numbers layers; mainly used for gaming; Ent/NS + Delete/Numbers2 to access Adjust layer) ,-----------------------------------------------------------------------------------------------------------. | ESC | F1 | F2 | F3 | F4 | F5 | F6 | F7 | F8 | F9 | F10 | F11 | F12 | PScr| SLck| Paus|Numpd|Adjst| `-----------------------------------------------------------------------------------------------------------' @@ -184,18 +184,18 @@ Persistent default layer has been enabled for Colemak and QWERTY. The gaming/va |--------+------+------+------+------+------| |------+------+------+------+------+--------| | Tab | Q | W | E | R | T | | Y | U | I | O | P | \ | |--------+------+------+------+------+------| |------+------+------+------+------+--------| - | Ctrl | A | S | D | F | G | | H | J | K | L | ; | ' | + | LCtrl | A | S | D | F | G | | H | J | K | L | ; | ' | |--------+------+------+------+------+------| |------+------+------+------+------+--------| | Shift | Z | X | C | V | B | | N | M | , | . | / | Shift | `--------+------+------+------+------+------' `------+------+------+------+------+--------' | Ins | ` | [ | ] | | Left | Down | Up | Right| `---------------------------' `---------------------------' ,---------------. ,---------------. - |Esc/Ctl|TD(ADJ)| | RAlt | RCtl | + | Esc | | | RAlt | RCtl | ,-------|-------|-------| |-------+-------+-------. - | | | LAlt | | RGUI | | | - | Space | Enter |-------| |-------| Delete| Bspc | - | | |Bspc/FN| | Ent/NS| | | + | | | LAlt | | RGUI | Delete| Bspc | + | Space | Enter |-------| |-------| / | / | + | | | Bspc | | Ent/NS|Number2| Fn2 | `-----------------------' `-----------------------' ### Adjust layer @@ -221,4 +221,4 @@ Persistent default layer has been enabled for Colemak and QWERTY. The gaming/va | | |-------| |-------| | | | | | | | | | | `-----------------------' `-----------------------' - \ No newline at end of file + From 5539d7affb52f467b41eb9245045ee4768a6b391 Mon Sep 17 00:00:00 2001 From: Jeff Hastings Date: Fri, 19 Apr 2019 13:43:15 -0400 Subject: [PATCH 137/171] [Keyboard] Update 1upkeyboards/super16 with code from vendor (#5645) * readme formatting * cleanup rules.mk * update config.h * add numpad layout * Update default keymap * cleanup rules * disable console and commands to fit the bootloader * cleanup whitespace * revert readme changes * revert changes to config.h * remove unused keycodes * add LAYOUTS to rules.mk * remove redundant config setting Co-Authored-By: jeffmhastings --- keyboards/1upkeyboards/super16/config.h | 13 ++++---- keyboards/1upkeyboards/super16/info.json | 23 +++++++------ .../super16/keymaps/default/keymap.c | 32 +++---------------- keyboards/1upkeyboards/super16/rules.mk | 16 ++++------ keyboards/1upkeyboards/super16/super16.c | 22 ++++++------- keyboards/1upkeyboards/super16/super16.h | 32 +++++++++++++------ 6 files changed, 64 insertions(+), 74 deletions(-) diff --git a/keyboards/1upkeyboards/super16/config.h b/keyboards/1upkeyboards/super16/config.h index 810aa254e4b..4af4dda63ae 100644 --- a/keyboards/1upkeyboards/super16/config.h +++ b/keyboards/1upkeyboards/super16/config.h @@ -21,7 +21,7 @@ along with this program. If not, see . /* USB Device descriptor parameter */ #define VENDOR_ID 0xFEED -#define PRODUCT_ID 0x0000 +#define PRODUCT_ID 0x2010 #define DEVICE_VER 0x0001 #define MANUFACTURER 1upkeyboards #define PRODUCT super16 @@ -65,9 +65,9 @@ along with this program. If not, see . #define RGBLIGHT_VAL_STEP 8 #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */ #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ -/*== all animations enable ==*/ -// #define RGBLIGHT_ANIMATIONS -// /*== or choose animations ==*/ + /*== all animations enable ==*/ + #define RGBLIGHT_ANIMATIONS + /*== or choose animations ==*/ // #define RGBLIGHT_EFFECT_BREATHING // #define RGBLIGHT_EFFECT_RAINBOW_MOOD // #define RGBLIGHT_EFFECT_RAINBOW_SWIRL @@ -85,10 +85,9 @@ along with this program. If not, see . /* define if matrix has ghost (lacks anti-ghosting diodes) */ //#define MATRIX_HAS_GHOST -/* number of backlight levels */ - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE + /* Locking resynchronize hack */ #define LOCKING_RESYNC_ENABLE @@ -242,3 +241,5 @@ along with this program. If not, see . /* Bootmagic Lite key configuration */ // #define BOOTMAGIC_LITE_ROW 0 // #define BOOTMAGIC_LITE_COLUMN 0 + +/* prevent stuck modifiers */ diff --git a/keyboards/1upkeyboards/super16/info.json b/keyboards/1upkeyboards/super16/info.json index e8f4faa23d4..10f81f4d08b 100644 --- a/keyboards/1upkeyboards/super16/info.json +++ b/keyboards/1upkeyboards/super16/info.json @@ -1,12 +1,15 @@ { - "keyboard_name": "super16", - "url": "", - "maintainer": "qmk", - "width": 4, - "height": 4, - "layouts": { - "LAYOUT_ortho_4x4": { - "layout": [{"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":0, "y":1}, {"x":1, "y":1}, {"x":2, "y":1}, {"x":3, "y":1}, {"x":0, "y":2}, {"x":1, "y":2}, {"x":2, "y":2}, {"x":3, "y":2}, {"x":0, "y":3}, {"x":1, "y":3}, {"x":2, "y":3}, {"x":3, "y":3}] - } + "keyboard_name": "super16", + "url": "", + "maintainer": "qmk", + "width": 4, + "height": 4, + "layouts": { + "LAYOUT_ortho_4x4": { + "layout": [{"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":0, "y":1}, {"x":1, "y":1}, {"x":2, "y":1}, {"x":3, "y":1}, {"x":0, "y":2}, {"x":1, "y":2}, {"x":2, "y":2}, {"x":3, "y":2}, {"x":0, "y":3}, {"x":1, "y":3}, {"x":2, "y":3}, {"x":3, "y":3}] + }, + "LAYOUT_numpad_4x4": { + "layout": [{"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0, "h":2}, {"x":0, "y":1}, {"x":1, "y":1}, {"x":2, "y":1}, {"x":0, "y":2}, {"x":1, "y":2}, {"x":2, "y":2}, {"x":3, "y":2, "h":2}, {"x":0, "y":3, "w":2}, {"x":2, "y":3}] } -} \ No newline at end of file + } +} diff --git a/keyboards/1upkeyboards/super16/keymaps/default/keymap.c b/keyboards/1upkeyboards/super16/keymaps/default/keymap.c index 36ad3f2839a..47889abae57 100644 --- a/keyboards/1upkeyboards/super16/keymaps/default/keymap.c +++ b/keyboards/1upkeyboards/super16/keymaps/default/keymap.c @@ -15,40 +15,16 @@ */ #include QMK_KEYBOARD_H -// Defines the keycodes used by our macros in process_record_user -enum custom_keycodes { - QMKBEST = SAFE_RANGE, - QMKURL -}; - const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { [0] = LAYOUT_ortho_4x4( /* Base */ - KC_A, KC_1, KC_2, KC_4, \ - KC_A, KC_1, KC_2, KC_4, \ - KC_A, KC_1, KC_2, KC_4, \ - KC_A, KC_1, KC_2, KC_4 \ + RGB_TOG, KC_1, KC_U, KC_P, + RGB_MOD, KC_1, KC_U, KC_P, + RGB_TOG, KC_1, KC_U, KC_P, + RGB_MOD, KC_1, KC_U, KC_P ), }; bool process_record_user(uint16_t keycode, keyrecord_t *record) { - switch (keycode) { - case QMKBEST: - if (record->event.pressed) { - // when keycode QMKBEST is pressed - SEND_STRING("QMK is the best thing ever!"); - } else { - // when keycode QMKBEST is released - } - break; - case QMKURL: - if (record->event.pressed) { - // when keycode QMKURL is pressed - SEND_STRING("https://qmk.fm/" SS_TAP(X_ENTER)); - } else { - // when keycode QMKURL is released - } - break; - } return true; } diff --git a/keyboards/1upkeyboards/super16/rules.mk b/keyboards/1upkeyboards/super16/rules.mk index 8fb44b9b5cf..31042dfb811 100644 --- a/keyboards/1upkeyboards/super16/rules.mk +++ b/keyboards/1upkeyboards/super16/rules.mk @@ -1,5 +1,4 @@ # MCU name -#MCU = at90usb1286 MCU = atmega32u4 # Processor frequency. @@ -15,7 +14,6 @@ MCU = atmega32u4 # software delays. F_CPU = 16000000 - # # LUFA specific # @@ -48,7 +46,6 @@ OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT # atmega32a bootloadHID BOOTLOADER = caterina - # If you don't know the bootloader type, then you can specify the # Boot Section Size in *bytes* by uncommenting out the OPT_DEFS line # Teensy halfKay 512 @@ -58,26 +55,27 @@ BOOTLOADER = caterina # USBaspLoader 2048 # OPT_DEFS += -DBOOTLOADER_SIZE=4096 +#EXTRAFLAGS += -flto # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration(+1000) +BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration(+1000) MOUSEKEY_ENABLE = yes # Mouse keys(+4700) EXTRAKEY_ENABLE = yes # Audio control and System control(+450) -CONSOLE_ENABLE = yes # Console for debug(+400) -COMMAND_ENABLE = yes # Commands for debug and configuration +CONSOLE_ENABLE = no # Console for debug(+400) +COMMAND_ENABLE = no # Commands for debug and configuration # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default -RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow +RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow MIDI_ENABLE = no # MIDI support (+2400 to 4200, depending on config) UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches -HD44780_ENABLE = no # Enable support for HD44780 based LCDs (+400) +HD44780_ENABLE = no # Enable support for HD44780 based LCDs (+400) -LAYOUTS = ortho_4x4 +LAYOUTS = ortho_4x4 numpad_4x4 diff --git a/keyboards/1upkeyboards/super16/super16.c b/keyboards/1upkeyboards/super16/super16.c index cf33cab9269..72e47f447b1 100644 --- a/keyboards/1upkeyboards/super16/super16.c +++ b/keyboards/1upkeyboards/super16/super16.c @@ -16,28 +16,28 @@ #include "super16.h" void matrix_init_kb(void) { - // put your keyboard start-up code here - // runs once when the firmware starts up + // put your keyboard start-up code here + // runs once when the firmware starts up - matrix_init_user(); + matrix_init_user(); } void matrix_scan_kb(void) { - // put your looping keyboard code here - // runs every cycle (a lot) + // put your looping keyboard code here + // runs every cycle (a lot) - matrix_scan_user(); + matrix_scan_user(); } bool process_record_kb(uint16_t keycode, keyrecord_t *record) { - // put your per-action keyboard code here - // runs for every action, just before processing by the firmware + // put your per-action keyboard code here + // runs for every action, just before processing by the firmware - return process_record_user(keycode, record); + return process_record_user(keycode, record); } void led_set_kb(uint8_t usb_led) { - // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here + // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here - led_set_user(usb_led); + led_set_user(usb_led); } diff --git a/keyboards/1upkeyboards/super16/super16.h b/keyboards/1upkeyboards/super16/super16.h index a95f687b164..0595af8dcd6 100644 --- a/keyboards/1upkeyboards/super16/super16.h +++ b/keyboards/1upkeyboards/super16/super16.h @@ -25,15 +25,27 @@ * The second converts the arguments into a two-dimensional array which * represents the switch matrix. */ + #define LAYOUT_ortho_4x4( \ - k00, k01, k02, k03, \ - k10, k11, k12, k13, \ - k20, k21, k22, k23, \ - k30, k31, k32, k33 \ -) \ -{ \ - { k00, k01, k02, k03 }, \ - { k10, k11, k12, k13 }, \ - { k20, k21, k22, k23 }, \ - { k30, k31, k32, k33 }, \ + K00, K01, K02, K03, \ + K10, K11, K12, K13, \ + K20, K21, K22, K23, \ + K30, K31, K32, K33 \ +) { \ + { K00, K01, K02, K03 }, \ + { K10, K11, K12, K13 }, \ + { K20, K21, K22, K23 }, \ + { K30, K31, K32, K33 } \ +} + +#define LAYOUT_numpad_4x4( \ + K00, K01, K02, K03, \ + K10, K11, K12, \ + K20, K21, K22, K23, \ + K31, K32 \ +) { \ + { K00, K01, K02, K03 }, \ + { K10, K11, K12, KC_NO }, \ + { K20, K21, K22, K23 }, \ + { KC_NO, K31, K32, KC_NO } \ } From 55ace26a5dc3650f596a88e776e040c7ec0b92e8 Mon Sep 17 00:00:00 2001 From: Jack Humbert Date: Fri, 19 Apr 2019 16:05:31 -0400 Subject: [PATCH 138/171] Remove default folders for the Planck & Preonic (#3497) * remove planck default folder * Update rules.mk --- keyboards/planck/rules.mk | 2 -- keyboards/preonic/rules.mk | 2 -- 2 files changed, 4 deletions(-) diff --git a/keyboards/planck/rules.mk b/keyboards/planck/rules.mk index 60979023841..520a2d5c7ba 100644 --- a/keyboards/planck/rules.mk +++ b/keyboards/planck/rules.mk @@ -44,5 +44,3 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend LAYOUTS = ortho_4x12 planck_mit planck_grid LAYOUTS_HAS_RGB = no - -DEFAULT_FOLDER = planck/rev5 diff --git a/keyboards/preonic/rules.mk b/keyboards/preonic/rules.mk index d5b21388af5..e646f2493f0 100644 --- a/keyboards/preonic/rules.mk +++ b/keyboards/preonic/rules.mk @@ -72,5 +72,3 @@ API_SYSEX_ENABLE = no SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend LAYOUTS = ortho_5x12 - -DEFAULT_FOLDER = preonic/rev2 \ No newline at end of file From b60413af60896a7b9d344f9f3dc61904015cb7ca Mon Sep 17 00:00:00 2001 From: Mike Roberts Date: Fri, 19 Apr 2019 16:07:35 -0400 Subject: [PATCH 139/171] Use auto output for Adafruit BLE (#4131) * use auto for adafruit ble * spacing * switch ifdef name --- quantum/quantum.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/quantum/quantum.c b/quantum/quantum.c index f5e3b63f8d2..a64878c7297 100644 --- a/quantum/quantum.c +++ b/quantum/quantum.c @@ -1084,6 +1084,9 @@ void matrix_init_quantum() { #ifdef HAPTIC_ENABLE haptic_init(); #endif + #ifdef OUTPUT_AUTO_ENABLE + set_output(OUTPUT_AUTO); + #endif matrix_init_kb(); } From 50fce7f255fa39c90239c6406f9c6b3ca2050114 Mon Sep 17 00:00:00 2001 From: zvecr Date: Fri, 19 Apr 2019 21:20:02 +0100 Subject: [PATCH 140/171] Travis CI - skip unit tests for documentation changes (#5267) * Add script to skip tests on non master branches with only docs changes * Review comments - Use 'grep -c' instead of 'wc -l' --- .travis.yml | 2 +- util/travis_test.sh | 22 ++++++++++++++++++++++ 2 files changed, 23 insertions(+), 1 deletion(-) create mode 100644 util/travis_test.sh diff --git a/.travis.yml b/.travis.yml index 261e21dc70a..a50b205ec07 100644 --- a/.travis.yml +++ b/.travis.yml @@ -21,7 +21,7 @@ before_script: - avr-gcc --version script: - git rev-parse --short HEAD -- make test:all +- bash util/travis_test.sh - bash util/travis_build.sh - bash util/travis_docs.sh addons: diff --git a/util/travis_test.sh b/util/travis_test.sh new file mode 100644 index 00000000000..6c48f898ce5 --- /dev/null +++ b/util/travis_test.sh @@ -0,0 +1,22 @@ +#!/bin/bash + +TRAVIS_COMMIT_MESSAGE="${TRAVIS_COMMIT_MESSAGE:-none}" +TRAVIS_COMMIT_RANGE="${TRAVIS_COMMIT_RANGE:-HEAD~1..HEAD}" + +# test force push +#TRAVIS_COMMIT_RANGE="c287f1bfc5c8...81f62atc4c1d" + +NUM_IMPACTING_CHANGES=$(git diff --name-only -n 1 ${TRAVIS_COMMIT_RANGE} | grep -Ecv '^(docs/)') +BRANCH=$(git rev-parse --abbrev-ref HEAD) + +if [[ "$TRAVIS_COMMIT_MESSAGE" == *"[skip test]"* ]]; then + echo "Skipping due to commit message" + exit 0 +fi + +if [ "$BRANCH" != "master" ] && [ "$NUM_IMPACTING_CHANGES" == "0" ]; then + echo "Skipping due to changes not impacting tests" + exit 0 +fi + +make test:all From 746058306b6c3b037fc560a13bb78d088c734401 Mon Sep 17 00:00:00 2001 From: Danny Nguyen Date: Wed, 20 Mar 2019 17:45:45 -0400 Subject: [PATCH 141/171] Make sure NOBITS is set on reset_key Patch from https://github.com/qmk/qmk_firmware/issues/3657#issuecomment-415147411 Long story short, in avr-gcc pre-8.2, reset_key was assigned to a memory area that was in a normal range, but when 8.2 came out, that memory got moved to an out of range area, causing errors like 0x800293 out of range. Apparently, this was fixed up in avr-gcc, but we haven't seen a release with the fix yet (we expected it in 8.3, but that didn't happen for some reason). What this commit does is move the reset_key back to the original memory location it was in before. --- tmk_core/common/avr/bootloader.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/tmk_core/common/avr/bootloader.c b/tmk_core/common/avr/bootloader.c index c4b913280ed..3cdcd2e426b 100644 --- a/tmk_core/common/avr/bootloader.c +++ b/tmk_core/common/avr/bootloader.c @@ -70,7 +70,7 @@ * http://www.fourwalledcubicle.com/files/LUFA/Doc/120730/html/_page__software_bootloader_start.html */ #define BOOTLOADER_RESET_KEY 0xB007B007 -uint32_t reset_key __attribute__ ((section (".noinit"))); +uint32_t reset_key __attribute__ ((section (".noinit,\"aw\",@nobits;"))); /** \brief initialize MCU status by watchdog reset * From 1ef01ba4c695f2047415df3514e4e5edfaf2bc60 Mon Sep 17 00:00:00 2001 From: mechmerlin Date: Sat, 23 Mar 2019 00:08:33 -0700 Subject: [PATCH 142/171] add -yq flags to actually make it noninteractive --- util/linux_install.sh | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/util/linux_install.sh b/util/linux_install.sh index d6e6b86cdc4..608975a9158 100755 --- a/util/linux_install.sh +++ b/util/linux_install.sh @@ -34,7 +34,7 @@ elif grep ID /etc/os-release | grep -qE 'debian|ubuntu'; then DEBCONF_NONINTERACTIVE_SEEN=true export DEBIAN_FRONTEND DEBCONF_NONINTERACTIVE_SEEN sudo apt-get update - sudo apt-get install \ + sudo apt-get -yq install \ build-essential \ avr-libc \ binutils-arm-none-eabi \ From dd64a4e73868027b44a018278039cc42a01e730b Mon Sep 17 00:00:00 2001 From: Drashna Jaelre Date: Mon, 4 Mar 2019 22:10:13 -0800 Subject: [PATCH 143/171] Init RGB Matrix EEPROM I'm not sure how to check if it's the same as RGBLIGHT's EEPROM, but if you don't init it, it **will not** work properly until it is initialized. --- docs/feature_rgb_matrix.md | 4 ++-- tmk_core/common/eeconfig.c | 5 +++-- 2 files changed, 5 insertions(+), 4 deletions(-) diff --git a/docs/feature_rgb_matrix.md b/docs/feature_rgb_matrix.md index e744ecc4920..05c1ebba815 100644 --- a/docs/feature_rgb_matrix.md +++ b/docs/feature_rgb_matrix.md @@ -253,10 +253,10 @@ A similar function works in the keymap as `rgb_matrix_indicators_user`. The EEPROM for it is currently shared with the RGBLIGHT system (it's generally assumed only one RGB would be used at a time), but could be configured to use its own 32bit address with: ```C -#define EECONFIG_RGB_MATRIX (uint32_t *)16 +#define EECONFIG_RGB_MATRIX (uint32_t *)28 ``` -Where `16` is an unused index from `eeconfig.h`. +Where `28` is an unused index from `eeconfig.h`. ## Suspended state diff --git a/tmk_core/common/eeconfig.c b/tmk_core/common/eeconfig.c index 9c1e3520eea..30dc7a48d4c 100644 --- a/tmk_core/common/eeconfig.c +++ b/tmk_core/common/eeconfig.c @@ -47,6 +47,9 @@ void eeconfig_init_quantum(void) { eeprom_update_byte(EECONFIG_STENOMODE, 0); eeprom_update_dword(EECONFIG_HAPTIC, 0); eeprom_update_byte(EECONFIG_VELOCIKEY, 0); +#ifdef EECONFIG_RGB_MATRIX + eeprom_update_dword(EECONFIG_RGB_MATRIX, 0); +#endif eeconfig_init_kb(); } @@ -185,5 +188,3 @@ uint32_t eeconfig_read_haptic(void) { return eeprom_read_dword(EECONFIG_HAP * FIXME: needs doc */ void eeconfig_update_haptic(uint32_t val) { eeprom_update_dword(EECONFIG_HAPTIC, val); } - - From dfab177f889fd6701e5f898c869be1bf3a2d0ef9 Mon Sep 17 00:00:00 2001 From: Takeshi ISHII <2170248+mtei@users.noreply.github.com> Date: Sat, 20 Apr 2019 07:05:51 +0900 Subject: [PATCH 144/171] Add function to support split-keyboard in rgblight.[ch]. (#5020) * add temporary file that is rgblight.c call graph * add rgblight_update_hook() * update rgblight-call-graph.dot (temporary file) * add more hook point * add TODO comment * temporary Revert "add TODO comment" This reverts commit df6165aac9b3a31d1d3e31ce52aadc134b84eac2. * temporary Revert "add more hook point" This reverts commit 64592b06f3bcdaac47c59f922018a273bef76776. * temporary Revert "add rgblight_update_hook()" This reverts commit 432b74c912ed4333e6633e20a1bcda10c6a10eaf. * add rgblight_update_hook() * add more hook point * add TODO comment * implement rgblight_update_hook() * remove rgblight_update_hook(), add RGBLIGHT_SPLIT_SET_CHANGE_XXXX rgblight_update_hook() is too large. change to simple flag setting. * shrink rgblight_config_t * implement rgblight_update_sync() Note: The animation synchronization process has not been implemented yet. * update quantum/rgblight-call-graph.dot (temporary file) * rmove quantum/rgblight-call-graph.dot (temporary file) * update rgblight.c * Add temporary code to Helix keyboard 'five_rows' keymap to test rgblight.c . * fix build break rgblight_update_sync() when all animation off * fix quantum/rgblight.c:rgblight_disable_XX() add RGBLIGHT_SPLIT_SET_CHANGE_MODE * quantum/rgblight.c change code order: move rgblight_update_sync() * add mode_base_table[] to quantum/rgblight.c * quantum/rgblight.c use mode_base_table[] and rgblight_status.base_mode * quantum/rgblkght.c animation timer integration * quantum/rgblkght.c add animation sync for split keyboard * fix mode_base_table[] and snake effect * fix build break keyboards/mxss. keyboards/mxss's local rgblight.c need old version rgblight.h * rgblight.c: fix animation sync * quantum/rgblight.c: fix snake effect sync * quantum/rgblight.c: animation sync interverl 30 sec * quantum/rgblight.c: fix rgblight_effect_rainbow_swirl() and rgblight_effect_knight() * quantum/rgblight.c: add macro RGBLIGHT_SPLIT_ANIMATION * cherry-pick from 'rgblight_modes.h sample implementation' * fix RGBLIGHT_SPLIT_ANIMATION check position * Update temporary code in Helix keyboard 'five_rows' keymap to test rgblight.c * Reduce the firmware size by 1500 bytes when rgblight_effect_breathing() is enabled. * Changed to rgblight_sethsv_eeprom_helper() for easier reading. * add fail-safe code to quantum/rgblight.c:rgblight_task(),rgblight_timer_enable() * remove temporary code in Helix keyboard 'five_rows' keymap * quantum/rgblight.c: add split-keyboard master side sync functions add functions: uint8_t rgblight_get_change_flags(void); void rgblight_clear_change_flags(void); void rgblight_get_syncinfo(rgblight_syncinfo_t *syncinfo); change function: void rgblight_update_sync(rgblight_syncinfo_t *syncinfo, bool write_to_eeprom); * Change rgblight_update_sync() to use write_to_eeprom. * remove TODO comment from quantum/rgblight.h * Revert "fix build break keyboards/mxss." This reverts commit 90b9a1aa7d8af226751500e49e3ea0214cc4e024. (Separated this change into the newly opened PR #5461.) * Revert "Reduce the firmware size by 1500 bytes when rgblight_effect_breathing() is enabled." This reverts commit b61004e63e82cf5334cee4def4ba10cffa88885f. * update quantum/rgblight.c: Code size reduction when not using RGBLIGHT_SPLIT. * Add temporary code to Helix keyboard 'five_rows' keymap to test rgblight.c . * add temporary pdhelix(Patched Helix) code * Add temporary code to split_common/transport.c to test rgblight.c. * Finish testing rgblight.c with helix keyboard. Revert "Add temporary code to Helix keyboard 'five_rows' keymap to test rgblight.c ." This reverts commit 0bf81a4723a977adc0cb09b4272ee5c9b4f2bbbb. * Finish testing rgblight.c with quantum/split_common code. Revert "Add temporary code to split_common/transport.c to test rgblight.c." This reverts commit 71db3e24eef40d4c455fb9fd1664e4487c9d927a. * remove temporary pdhelix(Patched Helix) code This reverts commit 5287e51a394741bcb6028c7cfc0dd0c984645f76. * Added description of RGBLIGHT_SPLIT macro to docs/feature_rgblight.md. * add RGBLIGHT_SPLIT_SET_CHANGE_HSVS to rgblight_init() * Changed to restart animation only when changing mode. When changing hue, sat and val, the animation is not restarted and continues. --- docs/feature_rgblight.md | 1 + quantum/rgblight.c | 392 ++++++++++++++++++++++++++------------- quantum/rgblight.h | 136 ++++++-------- quantum/rgblight_modes.h | 67 +++++++ 4 files changed, 386 insertions(+), 210 deletions(-) create mode 100644 quantum/rgblight_modes.h diff --git a/docs/feature_rgblight.md b/docs/feature_rgblight.md index cba97cb417a..97a99599468 100644 --- a/docs/feature_rgblight.md +++ b/docs/feature_rgblight.md @@ -75,6 +75,7 @@ Your RGB lighting can be configured by placing these `#define`s in your `config. |`RGBLIGHT_VAL_STEP` |`17` |The number of steps to increment the brightness by | |`RGBLIGHT_LIMIT_VAL` |`255` |The maximum brightness level | |`RGBLIGHT_SLEEP` |*Not defined*|If defined, the RGB lighting will be switched off when the host goes to sleep| +|`RGBLIGHT_SPLIT` |*Not defined*|If defined, synchronization functionality for split keyboards is added| ## Animations diff --git a/quantum/rgblight.c b/quantum/rgblight.c index e2410424e4b..5ec11bc0777 100644 --- a/quantum/rgblight.c +++ b/quantum/rgblight.c @@ -34,14 +34,38 @@ #include "velocikey.h" #endif +#ifdef RGBLIGHT_SPLIT + /* for split keyboard */ + #define RGBLIGHT_SPLIT_SET_CHANGE_MODE rgblight_status.change_flags |= RGBLIGHT_STATUS_CHANGE_MODE + #define RGBLIGHT_SPLIT_SET_CHANGE_HSVS rgblight_status.change_flags |= RGBLIGHT_STATUS_CHANGE_HSVS + #define RGBLIGHT_SPLIT_SET_CHANGE_TIMER_ENABLE rgblight_status.change_flags |= RGBLIGHT_STATUS_CHANGE_TIMER + #define RGBLIGHT_SPLIT_ANIMATION_TICK rgblight_status.change_flags |= RGBLIGHT_STATUS_ANIMATION_TICK +#else + #define RGBLIGHT_SPLIT_SET_CHANGE_MODE + #define RGBLIGHT_SPLIT_SET_CHANGE_HSVS + #define RGBLIGHT_SPLIT_SET_CHANGE_TIMER_ENABLE + #define RGBLIGHT_SPLIT_ANIMATION_TICK +#endif + #define _RGBM_SINGLE_STATIC(sym) RGBLIGHT_MODE_ ## sym, #define _RGBM_SINGLE_DYNAMIC(sym) #define _RGBM_MULTI_STATIC(sym) RGBLIGHT_MODE_ ## sym, #define _RGBM_MULTI_DYNAMIC(sym) -#define _RGBM_TMP_STATIC(sym) RGBLIGHT_MODE_ ## sym, -#define _RGBM_TMP_DYNAMIC(sym) +#define _RGBM_TMP_STATIC(sym, msym) RGBLIGHT_MODE_ ## sym, +#define _RGBM_TMP_DYNAMIC(sym, msym) static uint8_t static_effect_table [] = { -#include "rgblight.h" +#include "rgblight_modes.h" +}; + +#define _RGBM_SINGLE_STATIC(sym) RGBLIGHT_MODE_ ## sym, +#define _RGBM_SINGLE_DYNAMIC(sym) RGBLIGHT_MODE_ ## sym, +#define _RGBM_MULTI_STATIC(sym) RGBLIGHT_MODE_ ## sym, +#define _RGBM_MULTI_DYNAMIC(sym) RGBLIGHT_MODE_ ## sym, +#define _RGBM_TMP_STATIC(sym, msym) RGBLIGHT_MODE_ ## msym, +#define _RGBM_TMP_DYNAMIC(sym, msym) RGBLIGHT_MODE_ ## msym, +static uint8_t mode_base_table [] = { + 0, // RGBLIGHT_MODE_zero +#include "rgblight_modes.h" }; static inline int is_static_effect(uint8_t mode) { @@ -61,14 +85,18 @@ const uint16_t RGBLED_GRADIENT_RANGES[] PROGMEM = {360, 240, 180, 120, 90}; #endif rgblight_config_t rgblight_config; +rgblight_status_t rgblight_status = { .timer_enabled = false }; bool is_rgblight_initialized = false; +#ifdef RGBLIGHT_USE_TIMER +animation_status_t animation_status = {}; +#endif + #ifndef LED_ARRAY LED_TYPE led[RGBLED_NUM]; #define LED_ARRAY led #endif -bool rgblight_timer_enabled = false; static uint8_t clipping_start_pos = 0; static uint8_t clipping_num_leds = RGBLED_NUM; @@ -221,6 +249,7 @@ void rgblight_init(void) { eeconfig_update_rgblight_default(); } rgblight_config.raw = eeconfig_read_rgblight(); + RGBLIGHT_SPLIT_SET_CHANGE_HSVS; if (!rgblight_config.mode) { dprintf("rgblight_init rgblight_config.mode = 0. Write default values to EEPROM.\n"); eeconfig_update_rgblight_default(); @@ -321,6 +350,7 @@ void rgblight_mode_eeprom_helper(uint8_t mode, bool write_to_eeprom) { } else { rgblight_config.mode = mode; } + RGBLIGHT_SPLIT_SET_CHANGE_MODE; if (write_to_eeprom) { eeconfig_update_rgblight(rgblight_config.raw); xprintf("rgblight mode [EEPROM]: %u\n", rgblight_config.mode); @@ -336,6 +366,9 @@ void rgblight_mode_eeprom_helper(uint8_t mode, bool write_to_eeprom) { rgblight_timer_enable(); #endif } +#ifdef RGBLIGHT_USE_TIMER + animation_status.restart = true; +#endif rgblight_sethsv_noeeprom(rgblight_config.hue, rgblight_config.sat, rgblight_config.val); } @@ -389,6 +422,7 @@ void rgblight_disable(void) { #ifdef RGBLIGHT_USE_TIMER rgblight_timer_disable(); #endif + RGBLIGHT_SPLIT_SET_CHANGE_MODE; wait_ms(50); rgblight_set(); } @@ -399,6 +433,7 @@ void rgblight_disable_noeeprom(void) { #ifdef RGBLIGHT_USE_TIMER rgblight_timer_disable(); #endif + RGBLIGHT_SPLIT_SET_CHANGE_MODE; wait_ms(50); rgblight_set(); } @@ -505,11 +540,13 @@ void rgblight_decrease_val(void) { } void rgblight_increase_speed(void) { rgblight_config.speed = increment( rgblight_config.speed, 1, 0, 3 ); + //RGBLIGHT_SPLIT_SET_CHANGE_HSVS; // NEED? eeconfig_update_rgblight(rgblight_config.raw);//EECONFIG needs to be increased to support this } void rgblight_decrease_speed(void) { rgblight_config.speed = decrement( rgblight_config.speed, 1, 0, 3 ); + //RGBLIGHT_SPLIT_SET_CHANGE_HSVS; // NEED?? eeconfig_update_rgblight(rgblight_config.raw);//EECONFIG needs to be increased to support this } @@ -524,6 +561,7 @@ void rgblight_sethsv_noeeprom_old(uint16_t hue, uint8_t sat, uint8_t val) { void rgblight_sethsv_eeprom_helper(uint16_t hue, uint8_t sat, uint8_t val, bool write_to_eeprom) { if (rgblight_config.enable) { + rgblight_status.base_mode = mode_base_table[rgblight_config.mode]; if (rgblight_config.mode == RGBLIGHT_MODE_STATIC_LIGHT) { // same static color LED_TYPE tmp_led; @@ -534,33 +572,30 @@ void rgblight_sethsv_eeprom_helper(uint16_t hue, uint8_t sat, uint8_t val, bool if ( 1 == 0 ) { //dummy } #ifdef RGBLIGHT_EFFECT_BREATHING - else if (rgblight_config.mode >= RGBLIGHT_MODE_BREATHING && - rgblight_config.mode <= RGBLIGHT_MODE_BREATHING_end) { + else if (rgblight_status.base_mode == RGBLIGHT_MODE_BREATHING ) { // breathing mode, ignore the change of val, use in memory value instead val = rgblight_config.val; } #endif #ifdef RGBLIGHT_EFFECT_RAINBOW_MOOD - else if (rgblight_config.mode >= RGBLIGHT_MODE_RAINBOW_MOOD && - rgblight_config.mode <= RGBLIGHT_MODE_RAINBOW_MOOD_end) { + else if (rgblight_status.base_mode == RGBLIGHT_MODE_RAINBOW_MOOD) { // rainbow mood, ignore the change of hue hue = rgblight_config.hue; } #endif #ifdef RGBLIGHT_EFFECT_RAINBOW_SWIRL - else if (rgblight_config.mode >= RGBLIGHT_MODE_RAINBOW_SWIRL && - rgblight_config.mode <= RGBLIGHT_MODE_RAINBOW_SWIRL_end) { + else if (rgblight_status.base_mode == RGBLIGHT_MODE_RAINBOW_SWIRL) { // rainbow swirl, ignore the change of hue hue = rgblight_config.hue; } #endif #ifdef RGBLIGHT_EFFECT_STATIC_GRADIENT - else if (rgblight_config.mode >= RGBLIGHT_MODE_STATIC_GRADIENT && - rgblight_config.mode <= RGBLIGHT_MODE_STATIC_GRADIENT_end) { + else if (rgblight_status.base_mode == RGBLIGHT_MODE_STATIC_GRADIENT) { // static gradient uint16_t _hue; - int8_t direction = ((rgblight_config.mode - RGBLIGHT_MODE_STATIC_GRADIENT) % 2) ? -1 : 1; - uint16_t range = pgm_read_word(&RGBLED_GRADIENT_RANGES[(rgblight_config.mode - RGBLIGHT_MODE_STATIC_GRADIENT) / 2]); + uint8_t delta = rgblight_config.mode - rgblight_status.base_mode; + int8_t direction = (delta % 2) ? -1 : 1; + uint16_t range = pgm_read_word(&RGBLED_GRADIENT_RANGES[delta / 2]); for (uint8_t i = 0; i < RGBLED_NUM; i++) { _hue = (range / RGBLED_NUM * i * direction + hue + 360) % 360; dprintf("rgblight rainbow set hsv: %u,%u,%d,%u\n", i, _hue, direction, range); @@ -570,6 +605,13 @@ void rgblight_sethsv_eeprom_helper(uint16_t hue, uint8_t sat, uint8_t val, bool } #endif } +#ifdef RGBLIGHT_SPLIT + if( rgblight_config.hue != hue || + rgblight_config.sat != sat || + rgblight_config.val != val ) { + RGBLIGHT_SPLIT_SET_CHANGE_HSVS; + } +#endif rgblight_config.hue = hue; rgblight_config.sat = sat; rgblight_config.val = val; @@ -711,10 +753,59 @@ void rgblight_set(void) { } #endif +#ifdef RGBLIGHT_SPLIT +/* for split keyboard master side */ +uint8_t rgblight_get_change_flags(void) { + return rgblight_status.change_flags; +} + +void rgblight_clear_change_flags(void) { + rgblight_status.change_flags = 0; +} + +void rgblight_get_syncinfo(rgblight_syncinfo_t *syncinfo) { + syncinfo->config = rgblight_config; + syncinfo->status = rgblight_status; +} + +/* for split keyboard slave side */ +void rgblight_update_sync(rgblight_syncinfo_t *syncinfo, bool write_to_eeprom) { + if (syncinfo->status.change_flags & RGBLIGHT_STATUS_CHANGE_MODE) { + if (syncinfo->config.enable) { + rgblight_config.enable = 1; // == rgblight_enable_noeeprom(); + rgblight_mode_eeprom_helper(syncinfo->config.mode, write_to_eeprom); + } else { + rgblight_disable_noeeprom(); + } + } + if (syncinfo->status.change_flags & RGBLIGHT_STATUS_CHANGE_HSVS) { + rgblight_sethsv_eeprom_helper(syncinfo->config.hue, syncinfo->config.sat, syncinfo->config.val, write_to_eeprom); + // rgblight_config.speed = config->speed; // NEED??? + } + #ifdef RGBLIGHT_USE_TIMER + if (syncinfo->status.change_flags & RGBLIGHT_STATUS_CHANGE_TIMER) { + if (syncinfo->status.timer_enabled) { + rgblight_timer_enable(); + } else { + rgblight_timer_disable(); + } + } + #ifndef RGBLIGHT_SPLIT_NO_ANIMATION_SYNC + if (syncinfo->status.change_flags & RGBLIGHT_STATUS_ANIMATION_TICK) { + animation_status.restart = true; + } + #endif /* RGBLIGHT_SPLIT_NO_ANIMATION_SYNC */ + #endif /* RGBLIGHT_USE_TIMER */ +} +#endif /* RGBLIGHT_SPLIT */ + #ifdef RGBLIGHT_USE_TIMER -// Animation timer -- AVR Timer3 +typedef void (*effect_func_t)(animation_status_t *anim); + +// Animation timer -- use system timer (AVR Timer0) void rgblight_timer_init(void) { + // OLD!!!! Animation timer -- AVR Timer3 // static uint8_t rgblight_timer_is_init = 0; // if (rgblight_timer_is_init) { // return; @@ -730,19 +821,29 @@ void rgblight_timer_init(void) { // OCR3AL = RGBLED_TIMER_TOP & 0xff; // SREG = sreg; - rgblight_timer_enabled = true; + rgblight_status.timer_enabled = false; + RGBLIGHT_SPLIT_SET_CHANGE_TIMER_ENABLE; } void rgblight_timer_enable(void) { - rgblight_timer_enabled = true; - dprintf("TIMER3 enabled.\n"); + if( !is_static_effect(rgblight_config.mode) ) { + rgblight_status.timer_enabled = true; + } + animation_status.last_timer = timer_read(); + RGBLIGHT_SPLIT_SET_CHANGE_TIMER_ENABLE; + dprintf("rgblight timer enabled.\n"); } void rgblight_timer_disable(void) { - rgblight_timer_enabled = false; - dprintf("TIMER3 disabled.\n"); + rgblight_status.timer_enabled = false; + RGBLIGHT_SPLIT_SET_CHANGE_TIMER_ENABLE; + dprintf("rgblight timer disable.\n"); } void rgblight_timer_toggle(void) { - rgblight_timer_enabled ^= rgblight_timer_enabled; - dprintf("TIMER3 toggled.\n"); + dprintf("rgblight timer toggle.\n"); + if(rgblight_status.timer_enabled) { + rgblight_timer_disable(); + } else { + rgblight_timer_enable(); + } } void rgblight_show_solid_color(uint8_t r, uint8_t g, uint8_t b) { @@ -751,64 +852,116 @@ void rgblight_show_solid_color(uint8_t r, uint8_t g, uint8_t b) { rgblight_setrgb(r, g, b); } -void rgblight_task(void) { +static void rgblight_effect_dummy(animation_status_t *anim) { + // do nothing + /******** + dprintf("rgblight_task() what happened?\n"); + dprintf("is_static_effect %d\n", is_static_effect(rgblight_config.mode)); + dprintf("mode = %d, base_mode = %d, timer_enabled %d, ", + rgblight_config.mode, rgblight_status.base_mode, + rgblight_status.timer_enabled); + dprintf("last_timer = %d\n",anim->last_timer); + **/ +} + +void rgblight_task(void) { + if (rgblight_status.timer_enabled) { + effect_func_t effect_func = rgblight_effect_dummy; + uint16_t interval_time = 2000; // dummy interval + uint8_t delta = rgblight_config.mode - rgblight_status.base_mode; + animation_status.delta = delta; - if (rgblight_timer_enabled) { // static light mode, do nothing here if ( 1 == 0 ) { //dummy } #ifdef RGBLIGHT_EFFECT_BREATHING - else if (rgblight_config.mode >= RGBLIGHT_MODE_BREATHING && - rgblight_config.mode <= RGBLIGHT_MODE_BREATHING_end) { + else if (rgblight_status.base_mode == RGBLIGHT_MODE_BREATHING) { // breathing mode - rgblight_effect_breathing(rgblight_config.mode - RGBLIGHT_MODE_BREATHING ); + interval_time = get_interval_time(&RGBLED_BREATHING_INTERVALS[delta], 1, 100); + effect_func = rgblight_effect_breathing; } #endif #ifdef RGBLIGHT_EFFECT_RAINBOW_MOOD - else if (rgblight_config.mode >= RGBLIGHT_MODE_RAINBOW_MOOD && - rgblight_config.mode <= RGBLIGHT_MODE_RAINBOW_MOOD_end) { + else if (rgblight_status.base_mode == RGBLIGHT_MODE_RAINBOW_MOOD) { // rainbow mood mode - rgblight_effect_rainbow_mood(rgblight_config.mode - RGBLIGHT_MODE_RAINBOW_MOOD); + interval_time = get_interval_time(&RGBLED_RAINBOW_MOOD_INTERVALS[delta], 5, 100); + effect_func = rgblight_effect_rainbow_mood; } #endif #ifdef RGBLIGHT_EFFECT_RAINBOW_SWIRL - else if (rgblight_config.mode >= RGBLIGHT_MODE_RAINBOW_SWIRL && - rgblight_config.mode <= RGBLIGHT_MODE_RAINBOW_SWIRL_end) { + else if (rgblight_status.base_mode == RGBLIGHT_MODE_RAINBOW_SWIRL) { // rainbow swirl mode - rgblight_effect_rainbow_swirl(rgblight_config.mode - RGBLIGHT_MODE_RAINBOW_SWIRL); + interval_time = get_interval_time(&RGBLED_RAINBOW_SWIRL_INTERVALS[delta / 2], 1, 100); + effect_func = rgblight_effect_rainbow_swirl; } #endif #ifdef RGBLIGHT_EFFECT_SNAKE - else if (rgblight_config.mode >= RGBLIGHT_MODE_SNAKE && - rgblight_config.mode <= RGBLIGHT_MODE_SNAKE_end) { + else if (rgblight_status.base_mode == RGBLIGHT_MODE_SNAKE) { // snake mode - rgblight_effect_snake(rgblight_config.mode - RGBLIGHT_MODE_SNAKE); + interval_time = get_interval_time(&RGBLED_SNAKE_INTERVALS[delta / 2], 1, 200); + effect_func = rgblight_effect_snake; } #endif #ifdef RGBLIGHT_EFFECT_KNIGHT - else if (rgblight_config.mode >= RGBLIGHT_MODE_KNIGHT && - rgblight_config.mode <= RGBLIGHT_MODE_KNIGHT_end) { + else if (rgblight_status.base_mode == RGBLIGHT_MODE_KNIGHT) { // knight mode - rgblight_effect_knight(rgblight_config.mode - RGBLIGHT_MODE_KNIGHT); + interval_time = get_interval_time(&RGBLED_KNIGHT_INTERVALS[delta], 5, 100); + effect_func = rgblight_effect_knight; } #endif #ifdef RGBLIGHT_EFFECT_CHRISTMAS - else if (rgblight_config.mode == RGBLIGHT_MODE_CHRISTMAS) { + else if (rgblight_status.base_mode == RGBLIGHT_MODE_CHRISTMAS) { // christmas mode - rgblight_effect_christmas(); + interval_time = RGBLIGHT_EFFECT_CHRISTMAS_INTERVAL; + effect_func = (effect_func_t)rgblight_effect_christmas; } #endif #ifdef RGBLIGHT_EFFECT_RGB_TEST - else if (rgblight_config.mode == RGBLIGHT_MODE_RGB_TEST) { + else if (rgblight_status.base_mode == RGBLIGHT_MODE_RGB_TEST) { // RGB test mode - rgblight_effect_rgbtest(); + interval_time = pgm_read_word(&RGBLED_RGBTEST_INTERVALS[0]); + effect_func = (effect_func_t)rgblight_effect_rgbtest; } #endif #ifdef RGBLIGHT_EFFECT_ALTERNATING - else if (rgblight_config.mode == RGBLIGHT_MODE_ALTERNATING){ - rgblight_effect_alternating(); + else if (rgblight_status.base_mode == RGBLIGHT_MODE_ALTERNATING){ + interval_time = 500; + effect_func = (effect_func_t)rgblight_effect_alternating; } #endif + if (animation_status.restart) { + animation_status.restart = false; + animation_status.last_timer = timer_read() - interval_time - 1; + animation_status.pos16 = 0; // restart signal to local each effect + } + if (timer_elapsed(animation_status.last_timer) >= interval_time) { +#if defined(RGBLIGHT_SPLIT) && !defined(RGBLIGHT_SPLIT_NO_ANIMATION_SYNC) + static uint16_t report_last_timer = 0; + static bool tick_flag = false; + uint16_t oldpos16; + if (tick_flag) { + tick_flag = false; + //dprintf("rgblight animation tick\n"); + if (timer_elapsed(report_last_timer) >= 30000) { + report_last_timer = timer_read(); + dprintf("rgblight animation tick report to slave\n"); + RGBLIGHT_SPLIT_ANIMATION_TICK; + } + } + oldpos16 = animation_status.pos16; + //dprintf("call effect function\n"); +#endif + animation_status.last_timer += interval_time; + effect_func(&animation_status); +#if defined(RGBLIGHT_SPLIT) && !defined(RGBLIGHT_SPLIT_NO_ANIMATION_SYNC) + //dprintf("pos16, oldpos16 = %d %d\n", + // animation_status.pos16,oldpos16); + if (animation_status.pos16 == 0 && oldpos16 != 0) { + //dprintf("flag on\n"); + tick_flag = true; + } +#endif + } } } @@ -819,22 +972,13 @@ void rgblight_task(void) { __attribute__ ((weak)) const uint8_t RGBLED_BREATHING_INTERVALS[] PROGMEM = {30, 20, 10, 5}; -void rgblight_effect_breathing(uint8_t interval) { - static uint8_t pos = 0; - static uint16_t last_timer = 0; +void rgblight_effect_breathing(animation_status_t *anim) { float val; - uint8_t interval_time = get_interval_time(&RGBLED_BREATHING_INTERVALS[interval], 1, 100); - - if (timer_elapsed(last_timer) < interval_time) { - return; - } - last_timer = timer_read(); - // http://sean.voisen.org/blog/2011/10/breathing-led-with-arduino/ - val = (exp(sin((pos/255.0)*M_PI)) - RGBLIGHT_EFFECT_BREATHE_CENTER/M_E)*(RGBLIGHT_EFFECT_BREATHE_MAX/(M_E-1/M_E)); + val = (exp(sin((anim->pos/255.0)*M_PI)) - RGBLIGHT_EFFECT_BREATHE_CENTER/M_E)*(RGBLIGHT_EFFECT_BREATHE_MAX/(M_E-1/M_E)); rgblight_sethsv_noeeprom_old(rgblight_config.hue, rgblight_config.sat, val); - pos = (pos + 1) % 256; + anim->pos = (anim->pos + 1) % 256; } #endif @@ -842,18 +986,9 @@ void rgblight_effect_breathing(uint8_t interval) { __attribute__ ((weak)) const uint8_t RGBLED_RAINBOW_MOOD_INTERVALS[] PROGMEM = {120, 60, 30}; -void rgblight_effect_rainbow_mood(uint8_t interval) { - static uint16_t current_hue = 0; - static uint16_t last_timer = 0; - - uint8_t interval_time = get_interval_time(&RGBLED_RAINBOW_MOOD_INTERVALS[interval], 5, 100); - - if (timer_elapsed(last_timer) < interval_time) { - return; - } - last_timer = timer_read(); - rgblight_sethsv_noeeprom_old(current_hue, rgblight_config.sat, rgblight_config.val); - current_hue = (current_hue + 1) % 360; +void rgblight_effect_rainbow_mood(animation_status_t *anim) { + rgblight_sethsv_noeeprom_old(anim->current_hue, rgblight_config.sat, rgblight_config.val); + anim->current_hue = (anim->current_hue + 1) % 360; } #endif @@ -865,31 +1000,23 @@ void rgblight_effect_rainbow_mood(uint8_t interval) { __attribute__ ((weak)) const uint8_t RGBLED_RAINBOW_SWIRL_INTERVALS[] PROGMEM = {100, 50, 20}; -void rgblight_effect_rainbow_swirl(uint8_t interval) { - static uint16_t current_hue = 0; - static uint16_t last_timer = 0; +void rgblight_effect_rainbow_swirl(animation_status_t *anim) { uint16_t hue; uint8_t i; - uint8_t interval_time = get_interval_time(&RGBLED_RAINBOW_SWIRL_INTERVALS[interval / 2], 1, 100); - - if (timer_elapsed(last_timer) < interval_time) { - return; - } - last_timer = timer_read(); for (i = 0; i < RGBLED_NUM; i++) { - hue = (RGBLIGHT_RAINBOW_SWIRL_RANGE / RGBLED_NUM * i + current_hue) % 360; + hue = (RGBLIGHT_RAINBOW_SWIRL_RANGE / RGBLED_NUM * i + anim->current_hue) % 360; sethsv(hue, rgblight_config.sat, rgblight_config.val, (LED_TYPE *)&led[i]); } rgblight_set(); - if (interval % 2) { - current_hue = (current_hue + 1) % 360; + if (anim->delta % 2) { + anim->current_hue = (anim->current_hue + 1) % 360; } else { - if (current_hue - 1 < 0) { - current_hue = 359; + if (anim->current_hue - 1 < 0) { + anim->current_hue = 359; } else { - current_hue = current_hue - 1; + anim->current_hue = anim->current_hue - 1; } } } @@ -899,22 +1026,27 @@ void rgblight_effect_rainbow_swirl(uint8_t interval) { __attribute__ ((weak)) const uint8_t RGBLED_SNAKE_INTERVALS[] PROGMEM = {100, 50, 20}; -void rgblight_effect_snake(uint8_t interval) { +void rgblight_effect_snake(animation_status_t *anim) { static uint8_t pos = 0; - static uint16_t last_timer = 0; uint8_t i, j; int8_t k; int8_t increment = 1; - if (interval % 2) { + + if (anim->delta % 2) { increment = -1; } - uint8_t interval_time = get_interval_time(&RGBLED_SNAKE_INTERVALS[interval / 2], 1, 200); - - if (timer_elapsed(last_timer) < interval_time) { - return; +#if defined(RGBLIGHT_SPLIT) && !defined(RGBLIGHT_SPLIT_NO_ANIMATION_SYNC) + if (anim->pos == 0) { // restart signal + if (increment == 1) { + pos = RGBLED_NUM - 1; + } else { + pos = 0; + } + anim->pos = 1; } - last_timer = timer_read(); +#endif + for (i = 0; i < RGBLED_NUM; i++) { led[i].r = 0; led[i].g = 0; @@ -925,7 +1057,9 @@ void rgblight_effect_snake(uint8_t interval) { k = k + RGBLED_NUM; } if (i == k) { - sethsv(rgblight_config.hue, rgblight_config.sat, (uint8_t)(rgblight_config.val*(RGBLIGHT_EFFECT_SNAKE_LENGTH-j)/RGBLIGHT_EFFECT_SNAKE_LENGTH), (LED_TYPE *)&led[i]); + sethsv(rgblight_config.hue, rgblight_config.sat, + (uint8_t)(rgblight_config.val*(RGBLIGHT_EFFECT_SNAKE_LENGTH-j)/RGBLIGHT_EFFECT_SNAKE_LENGTH), + (LED_TYPE *)&led[i]); } } } @@ -933,11 +1067,20 @@ void rgblight_effect_snake(uint8_t interval) { if (increment == 1) { if (pos - 1 < 0) { pos = RGBLED_NUM - 1; +#if defined(RGBLIGHT_SPLIT) && !defined(RGBLIGHT_SPLIT_NO_ANIMATION_SYNC) + anim->pos = 0; +#endif } else { pos -= 1; +#if defined(RGBLIGHT_SPLIT) && !defined(RGBLIGHT_SPLIT_NO_ANIMATION_SYNC) + anim->pos = 1; +#endif } } else { pos = (pos + 1) % RGBLED_NUM; +#if defined(RGBLIGHT_SPLIT) && !defined(RGBLIGHT_SPLIT_NO_ANIMATION_SYNC) + anim->pos = pos; +#endif } } #endif @@ -946,21 +1089,21 @@ void rgblight_effect_snake(uint8_t interval) { __attribute__ ((weak)) const uint8_t RGBLED_KNIGHT_INTERVALS[] PROGMEM = {127, 63, 31}; -void rgblight_effect_knight(uint8_t interval) { - static uint16_t last_timer = 0; - - uint8_t interval_time = get_interval_time(&RGBLED_KNIGHT_INTERVALS[interval], 5, 100); - - if (timer_elapsed(last_timer) < interval_time) { - return; - } - last_timer = timer_read(); +void rgblight_effect_knight(animation_status_t *anim) { static int8_t low_bound = 0; static int8_t high_bound = RGBLIGHT_EFFECT_KNIGHT_LENGTH - 1; static int8_t increment = 1; uint8_t i, cur; +#if defined(RGBLIGHT_SPLIT) && !defined(RGBLIGHT_SPLIT_NO_ANIMATION_SYNC) + if (anim->pos == 0) { // restart signal + anim->pos = 1; + low_bound = 0; + high_bound = RGBLIGHT_EFFECT_KNIGHT_LENGTH - 1; + increment = 1; + } +#endif // Set all the LEDs to 0 for (i = 0; i < RGBLED_NUM; i++) { led[i].r = 0; @@ -988,23 +1131,23 @@ void rgblight_effect_knight(uint8_t interval) { if (high_bound <= 0 || low_bound >= RGBLIGHT_EFFECT_KNIGHT_LED_NUM - 1) { increment = -increment; +#if defined(RGBLIGHT_SPLIT) && !defined(RGBLIGHT_SPLIT_NO_ANIMATION_SYNC) + if (increment == 1) { + anim->pos = 0; + } +#endif } } #endif #ifdef RGBLIGHT_EFFECT_CHRISTMAS -void rgblight_effect_christmas(void) { - static uint16_t current_offset = 0; - static uint16_t last_timer = 0; +void rgblight_effect_christmas(animation_status_t *anim) { uint16_t hue; uint8_t i; - if (timer_elapsed(last_timer) < RGBLIGHT_EFFECT_CHRISTMAS_INTERVAL) { - return; - } - last_timer = timer_read(); - current_offset = (current_offset + 1) % 2; + + anim->current_offset = (anim->current_offset + 1) % 2; for (i = 0; i < RGBLED_NUM; i++) { - hue = 0 + ((i/RGBLIGHT_EFFECT_CHRISTMAS_STEP + current_offset) % 2) * 120; + hue = 0 + ((i/RGBLIGHT_EFFECT_CHRISTMAS_STEP + anim->current_offset) % 2) * 120; sethsv(hue, rgblight_config.sat, rgblight_config.val, (LED_TYPE *)&led[i]); } rgblight_set(); @@ -1015,52 +1158,39 @@ void rgblight_effect_christmas(void) { __attribute__ ((weak)) const uint16_t RGBLED_RGBTEST_INTERVALS[] PROGMEM = {1024}; -void rgblight_effect_rgbtest(void) { - static uint8_t pos = 0; - static uint16_t last_timer = 0; +void rgblight_effect_rgbtest(animation_status_t *anim) { static uint8_t maxval = 0; uint8_t g; uint8_t r; uint8_t b; - if (timer_elapsed(last_timer) < pgm_read_word(&RGBLED_RGBTEST_INTERVALS[0])) { - return; - } - if( maxval == 0 ) { LED_TYPE tmp_led; sethsv(0, 255, RGBLIGHT_LIMIT_VAL, &tmp_led); maxval = tmp_led.r; } - last_timer = timer_read(); g = r = b = 0; - switch( pos ) { + switch( anim->pos ) { case 0: r = maxval; break; case 1: g = maxval; break; case 2: b = maxval; break; } rgblight_setrgb(r, g, b); - pos = (pos + 1) % 3; + anim->pos = (anim->pos + 1) % 3; } #endif #ifdef RGBLIGHT_EFFECT_ALTERNATING -void rgblight_effect_alternating(void){ - static uint16_t last_timer = 0; - static uint16_t pos = 0; - if (timer_elapsed(last_timer) < 500) { - return; - } - last_timer = timer_read(); +void rgblight_effect_alternating(animation_status_t *anim) { for(int i = 0; ipos){ sethsv(rgblight_config.hue, rgblight_config.sat, rgblight_config.val, (LED_TYPE *)&led[i]); - }else if (i>=RGBLED_NUM/2 && !pos){ + }else if (i>=RGBLED_NUM/2 && !anim->pos){ sethsv(rgblight_config.hue, rgblight_config.sat, rgblight_config.val, (LED_TYPE *)&led[i]); }else{ sethsv(rgblight_config.hue, rgblight_config.sat, 0, (LED_TYPE *)&led[i]); } } rgblight_set(); - pos = (pos + 1) % 2; + anim->pos = (anim->pos + 1) % 2; } #endif diff --git a/quantum/rgblight.h b/quantum/rgblight.h index 1769f719d99..748d009dcf2 100644 --- a/quantum/rgblight.h +++ b/quantum/rgblight.h @@ -68,11 +68,11 @@ #define _RGBM_SINGLE_DYNAMIC(sym) RGBLIGHT_MODE_ ## sym, #define _RGBM_MULTI_STATIC(sym) RGBLIGHT_MODE_ ## sym, #define _RGBM_MULTI_DYNAMIC(sym) RGBLIGHT_MODE_ ## sym, -#define _RGBM_TMP_STATIC(sym) RGBLIGHT_MODE_ ## sym, -#define _RGBM_TMP_DYNAMIC(sym) RGBLIGHT_MODE_ ## sym, +#define _RGBM_TMP_STATIC(sym, msym) RGBLIGHT_MODE_ ## sym, +#define _RGBM_TMP_DYNAMIC(sym, msym) RGBLIGHT_MODE_ ## sym, enum RGBLIGHT_EFFECT_MODE { RGBLIGHT_MODE_zero = 0, -#include "rgblight.h" +#include "rgblight_modes.h" RGBLIGHT_MODE_last }; @@ -163,6 +163,33 @@ typedef union { }; } rgblight_config_t; +typedef struct _rgblight_status_t { + uint8_t base_mode; + bool timer_enabled; +#ifdef RGBLIGHT_SPLIT + uint8_t change_flags; +#endif +} rgblight_status_t; + +#ifdef RGBLIGHT_SPLIT + #define RGBLIGHT_STATUS_CHANGE_MODE (1<<0) + #define RGBLIGHT_STATUS_CHANGE_HSVS (1<<1) + #define RGBLIGHT_STATUS_CHANGE_TIMER (1<<2) + #define RGBLIGHT_STATUS_ANIMATION_TICK (1<<3) + + typedef struct _rgblight_syncinfo_t { + rgblight_config_t config; + rgblight_status_t status; + } rgblight_syncinfo_t; + + /* for split keyboard master side */ + uint8_t rgblight_get_change_flags(void); + void rgblight_clear_change_flags(void); + void rgblight_get_syncinfo(rgblight_syncinfo_t *syncinfo); + /* for split keyboard slave side */ + void rgblight_update_sync(rgblight_syncinfo_t *syncinfo, bool write_to_eeprom); +#endif + void rgblight_init(void); void rgblight_increase(void); void rgblight_decrease(void); @@ -237,82 +264,33 @@ void rgblight_timer_init(void); void rgblight_timer_enable(void); void rgblight_timer_disable(void); void rgblight_timer_toggle(void); -void rgblight_effect_breathing(uint8_t interval); -void rgblight_effect_rainbow_mood(uint8_t interval); -void rgblight_effect_rainbow_swirl(uint8_t interval); -void rgblight_effect_snake(uint8_t interval); -void rgblight_effect_knight(uint8_t interval); -void rgblight_effect_christmas(void); -void rgblight_effect_rgbtest(void); -void rgblight_effect_alternating(void); + +#ifdef RGBLIGHT_USE_TIMER + +typedef struct _animation_status_t { + uint16_t last_timer; + uint8_t delta; /* mode - base_mode */ + bool restart; + union { + uint16_t pos16; + uint8_t pos; + int16_t current_hue; + uint16_t current_offset; + }; +} animation_status_t; + +extern animation_status_t animation_status; + +void rgblight_effect_breathing(animation_status_t *anim); +void rgblight_effect_rainbow_mood(animation_status_t *anim); +void rgblight_effect_rainbow_swirl(animation_status_t *anim); +void rgblight_effect_snake(animation_status_t *anim); +void rgblight_effect_knight(animation_status_t *anim); +void rgblight_effect_christmas(animation_status_t *anim); +void rgblight_effect_rgbtest(animation_status_t *anim); +void rgblight_effect_alternating(animation_status_t *anim); + +#endif #endif // #ifndef RGBLIGHT_H_DUMMY_DEFINE #endif // RGBLIGHT_H - -#ifdef _RGBM_SINGLE_STATIC - _RGBM_SINGLE_STATIC( STATIC_LIGHT ) - #ifdef RGBLIGHT_EFFECT_BREATHING - _RGBM_MULTI_DYNAMIC( BREATHING ) - _RGBM_TMP_DYNAMIC( breathing_3 ) - _RGBM_TMP_DYNAMIC( breathing_4 ) - _RGBM_TMP_DYNAMIC( BREATHING_end ) - #endif - #ifdef RGBLIGHT_EFFECT_RAINBOW_MOOD - _RGBM_MULTI_DYNAMIC( RAINBOW_MOOD ) - _RGBM_TMP_DYNAMIC( rainbow_mood_7 ) - _RGBM_TMP_DYNAMIC( RAINBOW_MOOD_end ) - #endif - #ifdef RGBLIGHT_EFFECT_RAINBOW_SWIRL - _RGBM_MULTI_DYNAMIC( RAINBOW_SWIRL ) - _RGBM_TMP_DYNAMIC( rainbow_swirl_10 ) - _RGBM_TMP_DYNAMIC( rainbow_swirl_11 ) - _RGBM_TMP_DYNAMIC( rainbow_swirl_12 ) - _RGBM_TMP_DYNAMIC( rainbow_swirl_13 ) - _RGBM_TMP_DYNAMIC( RAINBOW_SWIRL_end ) - #endif - #ifdef RGBLIGHT_EFFECT_SNAKE - _RGBM_MULTI_DYNAMIC( SNAKE ) - _RGBM_TMP_DYNAMIC( snake_16 ) - _RGBM_TMP_DYNAMIC( snake_17 ) - _RGBM_TMP_DYNAMIC( snake_18 ) - _RGBM_TMP_DYNAMIC( snake_19 ) - _RGBM_TMP_DYNAMIC( SNAKE_end ) - #endif - #ifdef RGBLIGHT_EFFECT_KNIGHT - _RGBM_MULTI_DYNAMIC( KNIGHT ) - _RGBM_TMP_DYNAMIC( knight_22 ) - _RGBM_TMP_DYNAMIC( KNIGHT_end ) - #endif - #ifdef RGBLIGHT_EFFECT_CHRISTMAS - _RGBM_SINGLE_DYNAMIC( CHRISTMAS ) - #endif - #ifdef RGBLIGHT_EFFECT_STATIC_GRADIENT - _RGBM_MULTI_STATIC( STATIC_GRADIENT ) - _RGBM_TMP_STATIC( static_gradient_26 ) - _RGBM_TMP_STATIC( static_gradient_27 ) - _RGBM_TMP_STATIC( static_gradient_28 ) - _RGBM_TMP_STATIC( static_gradient_29 ) - _RGBM_TMP_STATIC( static_gradient_30 ) - _RGBM_TMP_STATIC( static_gradient_31 ) - _RGBM_TMP_STATIC( static_gradient_32 ) - _RGBM_TMP_STATIC( static_gradient_33 ) - _RGBM_TMP_STATIC( STATIC_GRADIENT_end ) - #endif - #ifdef RGBLIGHT_EFFECT_RGB_TEST - _RGBM_SINGLE_DYNAMIC( RGB_TEST ) - #endif - #ifdef RGBLIGHT_EFFECT_ALTERNATING - _RGBM_SINGLE_DYNAMIC( ALTERNATING ) - #endif - //// Add a new mode here. - // #ifdef RGBLIGHT_EFFECT_ - // _RGBM__( ) - // #endif -#endif - -#undef _RGBM_SINGLE_STATIC -#undef _RGBM_SINGLE_DYNAMIC -#undef _RGBM_MULTI_STATIC -#undef _RGBM_MULTI_DYNAMIC -#undef _RGBM_TMP_STATIC -#undef _RGBM_TMP_DYNAMIC diff --git a/quantum/rgblight_modes.h b/quantum/rgblight_modes.h new file mode 100644 index 00000000000..8a8f9bdda97 --- /dev/null +++ b/quantum/rgblight_modes.h @@ -0,0 +1,67 @@ +#ifdef _RGBM_SINGLE_STATIC + _RGBM_SINGLE_STATIC( STATIC_LIGHT ) + #ifdef RGBLIGHT_EFFECT_BREATHING + _RGBM_MULTI_DYNAMIC( BREATHING ) + _RGBM_TMP_DYNAMIC( breathing_3, BREATHING ) + _RGBM_TMP_DYNAMIC( breathing_4, BREATHING ) + _RGBM_TMP_DYNAMIC( BREATHING_end, BREATHING ) + #endif + #ifdef RGBLIGHT_EFFECT_RAINBOW_MOOD + _RGBM_MULTI_DYNAMIC( RAINBOW_MOOD ) + _RGBM_TMP_DYNAMIC( rainbow_mood_7, RAINBOW_MOOD ) + _RGBM_TMP_DYNAMIC( RAINBOW_MOOD_end, RAINBOW_MOOD ) + #endif + #ifdef RGBLIGHT_EFFECT_RAINBOW_SWIRL + _RGBM_MULTI_DYNAMIC( RAINBOW_SWIRL ) + _RGBM_TMP_DYNAMIC( rainbow_swirl_10, RAINBOW_SWIRL ) + _RGBM_TMP_DYNAMIC( rainbow_swirl_11, RAINBOW_SWIRL ) + _RGBM_TMP_DYNAMIC( rainbow_swirl_12, RAINBOW_SWIRL ) + _RGBM_TMP_DYNAMIC( rainbow_swirl_13, RAINBOW_SWIRL ) + _RGBM_TMP_DYNAMIC( RAINBOW_SWIRL_end, RAINBOW_SWIRL ) + #endif + #ifdef RGBLIGHT_EFFECT_SNAKE + _RGBM_MULTI_DYNAMIC( SNAKE ) + _RGBM_TMP_DYNAMIC( snake_16, SNAKE ) + _RGBM_TMP_DYNAMIC( snake_17, SNAKE ) + _RGBM_TMP_DYNAMIC( snake_18, SNAKE ) + _RGBM_TMP_DYNAMIC( snake_19, SNAKE ) + _RGBM_TMP_DYNAMIC( SNAKE_end, SNAKE ) + #endif + #ifdef RGBLIGHT_EFFECT_KNIGHT + _RGBM_MULTI_DYNAMIC( KNIGHT ) + _RGBM_TMP_DYNAMIC( knight_22, KNIGHT ) + _RGBM_TMP_DYNAMIC( KNIGHT_end, KNIGHT ) + #endif + #ifdef RGBLIGHT_EFFECT_CHRISTMAS + _RGBM_SINGLE_DYNAMIC( CHRISTMAS ) + #endif + #ifdef RGBLIGHT_EFFECT_STATIC_GRADIENT + _RGBM_MULTI_STATIC( STATIC_GRADIENT ) + _RGBM_TMP_STATIC( static_gradient_26, STATIC_GRADIENT ) + _RGBM_TMP_STATIC( static_gradient_27, STATIC_GRADIENT ) + _RGBM_TMP_STATIC( static_gradient_28, STATIC_GRADIENT ) + _RGBM_TMP_STATIC( static_gradient_29, STATIC_GRADIENT ) + _RGBM_TMP_STATIC( static_gradient_30, STATIC_GRADIENT ) + _RGBM_TMP_STATIC( static_gradient_31, STATIC_GRADIENT ) + _RGBM_TMP_STATIC( static_gradient_32, STATIC_GRADIENT ) + _RGBM_TMP_STATIC( static_gradient_33, STATIC_GRADIENT ) + _RGBM_TMP_STATIC( STATIC_GRADIENT_end, STATIC_GRADIENT ) + #endif + #ifdef RGBLIGHT_EFFECT_RGB_TEST + _RGBM_SINGLE_DYNAMIC( RGB_TEST ) + #endif + #ifdef RGBLIGHT_EFFECT_ALTERNATING + _RGBM_SINGLE_DYNAMIC( ALTERNATING ) + #endif + //// Add a new mode here. + // #ifdef RGBLIGHT_EFFECT_ + // _RGBM__( ) + // #endif +#endif + +#undef _RGBM_SINGLE_STATIC +#undef _RGBM_SINGLE_DYNAMIC +#undef _RGBM_MULTI_STATIC +#undef _RGBM_MULTI_DYNAMIC +#undef _RGBM_TMP_STATIC +#undef _RGBM_TMP_DYNAMIC From 7e67bd791b1804e1e362d8c1e90232440c274cee Mon Sep 17 00:00:00 2001 From: Takeshi ISHII <2170248+mtei@users.noreply.github.com> Date: Sat, 20 Apr 2019 07:25:08 +0900 Subject: [PATCH 145/171] Change split_common to use RGBLIGHT_SPLIT (#5509) * add I2C_slave_buffer_t to quantum/split_common/transport.c Improvements to ease the maintenance of the I2C slave buffer layout. And this commit does not change the compilation results. * add temporary pdhelix(Patched Helix) code * temporary cherry-pick from #5020 add new version(#5020) quantum/rgblight.[ch], quantum/rgblight_modes.h * add post_config.h support to build_keyboard.mk * add quantum/rgblight_post_config.h, quantum/split_common/post_config.h Add quantum/rgblight_post_config.h and quantum/split_common/post_config.h using POST_CONFIG_H variable of build_keyboard.mk. quantum/rgblight_post_config.h additionally defines RGBLIGHT_SPLIT if RGBLED_SPIT is defined. quantum/split_common/post_config.h defines RGBLIGHT_SPLIT additionally when master-slave communication is I2C. * Change split_common's transport.c I2C to use the synchronization feature of rgblight.c * Change split_common's transport.c serial to use the synchronization feature of rgblight.c * test RGBLIGHT_SPLIT on keyboards/handwired/pdhelix * Test End Revert "test RGBLIGHT_SPLIT on keyboards/handwired/pdhelix" This reverts commit 80118a6bbd3d9fc4c7797fef0c34bc67aa73aa98. [x] make RGBLIGHT_TEST=1 handwired/pdhelix/i2c:default [x] make RGBLIGHT_TEST=2 handwired/pdhelix/i2c:default (same RGBLIGHT_TEST=3) [x] make RGBLIGHT_TEST=3 handwired/pdhelix/i2c:default [x] make RGBLIGHT_TEST=1 handwired/pdhelix/pd2:default [x] make RGBLIGHT_TEST=2 handwired/pdhelix/pd2:default [x] make RGBLIGHT_TEST=3 handwired/pdhelix/pd2:default [x] make RGBLIGHT_TEST=1 handwired/pdhelix/pd2_2oled:default [x] make RGBLIGHT_TEST=2 handwired/pdhelix/pd2_2oled:default [x] make RGBLIGHT_TEST=3 handwired/pdhelix/pd2_2oled:default * Test End, Revert "temporary cherry-pick from #5020" This reverts commit d35069f68bda0c50370442a5c7aae60c2f4ce5c0. * Test End, Revert "add temporary pdhelix(Patched Helix) code" This reverts commit aebddfc1a879796afae297ef0723a4fe73af3660. * temporarily cherry-pick from #5020 to see if it passes the travis-ci test. add new version(#5020) quantum/rgblight.[ch], quantum/rgblight_modes.h * Passed the travis-ci test. Revert "temporarily cherry-pick from #5020 to see if it passes the travis-ci test." This reverts commit 647c0a9755eb6a05f76d09b2d59bce67b85a841f. * update docs/config_options.md * update split_common/transport.c, improves maintainability of serial transaction IDs. No change in build result. * temporary cherry-pick from #5020 * fix build fail keebio/iris/rev3:default * fix build fail lets_split_eh/eh:default * Revert "temporary cherry-pick from #5020" This reverts commit be48ca1b4515366a097af8dd1cd7b28b7ee09947. * temporary cherry-pick from #5020 (0.6.336) * Revert "temporary cherry-pick from #5020 (0.6.336)" This reverts commit 978d26a8b3cf0acc485838a7d76d6128b77c630c. * temporary cherry-pick from #5020 (0.6.336) --- build_keyboard.mk | 18 +++ common_features.mk | 2 + docs/config_options.md | 4 +- quantum/rgblight_post_config.h | 5 + quantum/split_common/post_config.h | 15 +++ quantum/split_common/transport.c | 184 +++++++++++++++++------------ 6 files changed, 153 insertions(+), 75 deletions(-) create mode 100644 quantum/rgblight_post_config.h create mode 100644 quantum/split_common/post_config.h diff --git a/build_keyboard.mk b/build_keyboard.mk index ee6a69fc79d..5d633f27169 100644 --- a/build_keyboard.mk +++ b/build_keyboard.mk @@ -280,6 +280,23 @@ ifneq ("$(wildcard $(KEYBOARD_PATH_1)/config.h)","") CONFIG_H += $(KEYBOARD_PATH_1)/config.h endif +POST_CONFIG_H := +ifneq ("$(wildcard $(KEYBOARD_PATH_1)/post_config.h)","") + POST_CONFIG_H += $(KEYBOARD_PATH_1)/post_config.h +endif +ifneq ("$(wildcard $(KEYBOARD_PATH_2)/post_config.h)","") + POST_CONFIG_H += $(KEYBOARD_PATH_2)/post_config.h +endif +ifneq ("$(wildcard $(KEYBOARD_PATH_3)/post_config.h)","") + POST_CONFIG_H += $(KEYBOARD_PATH_3)/post_config.h +endif +ifneq ("$(wildcard $(KEYBOARD_PATH_4)/post_config.h)","") + POST_CONFIG_H += $(KEYBOARD_PATH_4)/post_config.h +endif +ifneq ("$(wildcard $(KEYBOARD_PATH_5)/post_config.h)","") + POST_CONFIG_H += $(KEYBOARD_PATH_5)/post_config.h +endif + # Save the defines and includes here, so we don't include any keymap specific ones PROJECT_DEFS := $(OPT_DEFS) PROJECT_INC := $(VPATH) $(EXTRAINCDIRS) $(KEYBOARD_PATHS) @@ -355,6 +372,7 @@ ifeq ($(strip $(VISUALIZER_ENABLE)), yes) include $(VISUALIZER_PATH)/visualizer.mk endif +CONFIG_H += $(POST_CONFIG_H) ALL_CONFIGS := $(PROJECT_CONFIG) $(CONFIG_H) OUTPUTS := $(KEYMAP_OUTPUT) $(KEYBOARD_OUTPUT) diff --git a/common_features.mk b/common_features.mk index bd1685869d0..eb623d18fa6 100644 --- a/common_features.mk +++ b/common_features.mk @@ -103,6 +103,7 @@ ifeq ($(strip $(UNICODE_COMMON)), yes) endif ifeq ($(strip $(RGBLIGHT_ENABLE)), yes) + POST_CONFIG_H += $(QUANTUM_DIR)/rgblight_post_config.h OPT_DEFS += -DRGBLIGHT_ENABLE SRC += $(QUANTUM_DIR)/rgblight.c CIE1931_CURVE = yes @@ -318,6 +319,7 @@ ifneq ($(strip $(DEBOUNCE_TYPE)), custom) endif ifeq ($(strip $(SPLIT_KEYBOARD)), yes) + POST_CONFIG_H += $(QUANTUM_DIR)/split_common/post_config.h OPT_DEFS += -DSPLIT_KEYBOARD # Include files used by all split keyboards diff --git a/docs/config_options.md b/docs/config_options.md index bc2a890586c..8f229a2cb8d 100644 --- a/docs/config_options.md +++ b/docs/config_options.md @@ -180,10 +180,12 @@ If you define these options you will enable the associated feature, which may in * run RGB animations * `#define RGBLED_NUM 12` * number of LEDs +* `#define RGBLIGHT_SPLIT` + * Needed if both halves of the board have RGB LEDs wired directly to the RGB output pin on the controllers instead of passing the output of the left half to the input of the right half * `#define RGBLED_SPLIT { 6, 6 }` * number of LEDs connected that are directly wired to `RGB_DI_PIN` on each half of a split keyboard * First value indicates number of LEDs for left half, second value is for the right half - * Needed if both halves of the board have RGB LEDs wired directly to the RGB output pin on the controllers instead of passing the output of the left half to the input of the right half + * When RGBLED_SPLIT is defined, RGBLIGHT_SPLIT is implicitly defined. * `#define RGBLIGHT_HUE_STEP 12` * units to step when in/decreasing hue * `#define RGBLIGHT_SAT_STEP 25` diff --git a/quantum/rgblight_post_config.h b/quantum/rgblight_post_config.h new file mode 100644 index 00000000000..048746c4b7d --- /dev/null +++ b/quantum/rgblight_post_config.h @@ -0,0 +1,5 @@ +#if defined(RGBLED_SPLIT) && !defined(RGBLIGHT_SPLIT) + // When RGBLED_SPLIT is defined, + // it is considered that RGBLIGHT_SPLIT is defined implicitly. + #define RGBLIGHT_SPLIT +#endif diff --git a/quantum/split_common/post_config.h b/quantum/split_common/post_config.h new file mode 100644 index 00000000000..0e59df3d06d --- /dev/null +++ b/quantum/split_common/post_config.h @@ -0,0 +1,15 @@ +#if defined(USE_I2C) || defined(EH) + // When using I2C, using rgblight implicitly involves split support. + #if defined(RGBLIGHT_ENABLE) && !defined(RGBLIGHT_SPLIT) + #define RGBLIGHT_SPLIT + #endif + +#else // use serial + // When using serial, the user must define RGBLIGHT_SPLIT explicitly + // in config.h as needed. + // see quantum/rgblight_post_config.h + #if defined(RGBLIGHT_ENABLE) && defined(RGBLIGHT_SPLIT) + // When using serial and RGBLIGHT_SPLIT need separate transaction + #define SERIAL_USE_MULTI_TRANSACTION + #endif +#endif diff --git a/quantum/split_common/transport.c b/quantum/split_common/transport.c index ab055ee6566..7ea1a9cec9f 100644 --- a/quantum/split_common/transport.c +++ b/quantum/split_common/transport.c @@ -25,36 +25,23 @@ extern backlight_config_t backlight_config; # include "i2c_master.h" # include "i2c_slave.h" -typedef struct __attribute__ ((__packed__)) { -#ifdef BACKLIGHT_ENABLE - uint8_t backlight_level; -#endif -#ifdef RGBLIGHT_ENABLE - uint32_t rgb_settings; +typedef struct _I2C_slave_buffer_t { + matrix_row_t smatrix[ROWS_PER_HAND]; + uint8_t backlight_level; +#if defined(RGBLIGHT_ENABLE) && defined(RGBLIGHT_SPLIT) + rgblight_syncinfo_t rgblight_sync; #endif #ifdef ENCODER_ENABLE - uint8_t encoder_state[NUMBER_OF_ENCODERS]; + uint8_t encoder_state[NUMBER_OF_ENCODERS]; #endif - // Keep matrix last, we are only using this for it's offset - uint8_t matrix_start[0]; -} transport_values_t; +} I2C_slave_buffer_t; -__attribute__ ((unused)) -static transport_values_t transport_values; +static I2C_slave_buffer_t * const i2c_buffer = (I2C_slave_buffer_t *)i2c_slave_reg; -#ifdef BACKLIGHT_ENABLE -# define I2C_BACKLIT_START (uint8_t)offsetof(transport_values_t, backlight_level) -#endif - -#ifdef RGBLIGHT_ENABLE -# define I2C_RGB_START (uint8_t)offsetof(transport_values_t, rgb_settings) -#endif - -#ifdef ENCODER_ENABLE -# define I2C_ENCODER_START (uint8_t)offsetof(transport_values_t, encoder_state) -#endif - -#define I2C_KEYMAP_START (uint8_t)offsetof(transport_values_t, matrix_start) +# define I2C_BACKLIGHT_START offsetof(I2C_slave_buffer_t, backlight_level) +# define I2C_RGB_START offsetof(I2C_slave_buffer_t, rgblight_sync) +# define I2C_KEYMAP_START offsetof(I2C_slave_buffer_t, smatrix) +# define I2C_ENCODER_START offsetof(I2C_slave_buffer_t, encoder_state) # define TIMEOUT 100 @@ -64,30 +51,32 @@ static transport_values_t transport_values; // Get rows from other half over i2c bool transport_master(matrix_row_t matrix[]) { - i2c_readReg(SLAVE_I2C_ADDRESS, I2C_KEYMAP_START, (void *)matrix, ROWS_PER_HAND * sizeof(matrix_row_t), TIMEOUT); + i2c_readReg(SLAVE_I2C_ADDRESS, I2C_KEYMAP_START, (void *)matrix, sizeof(i2c_buffer->smatrix), TIMEOUT); // write backlight info # ifdef BACKLIGHT_ENABLE uint8_t level = get_backlight_level(); - if (level != transport_values.backlight_level) { - if (i2c_writeReg(SLAVE_I2C_ADDRESS, I2C_BACKLIT_START, (void *)&level, sizeof(level), TIMEOUT) >= 0) { - transport_values.backlight_level = level; + if (level != i2c_buffer->backlight_level) { + if (i2c_writeReg(SLAVE_I2C_ADDRESS, I2C_BACKLIGHT_START, (void *)&level, sizeof(level), TIMEOUT) >= 0) { + i2c_buffer->backlight_level = level; } } # endif -# ifdef RGBLIGHT_ENABLE - uint32_t rgb = rgblight_read_dword(); - if (rgb != transport_values.rgb_settings) { - if (i2c_writeReg(SLAVE_I2C_ADDRESS, I2C_RGB_START, (void *)&rgb, sizeof(rgb), TIMEOUT) >= 0) { - transport_values.rgb_settings = rgb; +# if defined(RGBLIGHT_ENABLE) && defined(RGBLIGHT_SPLIT) + if (rgblight_get_change_flags()) { + rgblight_syncinfo_t rgblight_sync; + rgblight_get_syncinfo(&rgblight_sync); + if (i2c_writeReg(SLAVE_I2C_ADDRESS, I2C_RGB_START, + (void *)&rgblight_sync, sizeof(rgblight_sync), TIMEOUT) >= 0) { + rgblight_clear_change_flags(); } } # endif # ifdef ENCODER_ENABLE - i2c_readReg(SLAVE_I2C_ADDRESS, I2C_ENCODER_START, (void *)transport_values.encoder_state, sizeof(transport_values.encoder_state), TIMEOUT); - encoder_update_raw(&transport_values.encoder_state[0]); + i2c_readReg(SLAVE_I2C_ADDRESS, I2C_ENCODER_START, (void *)i2c_buffer->encoder_state, sizeof(I2C_slave_buffer_t.encoder_state), TIMEOUT); + encoder_update_raw(i2c_buffer->encoder_state); # endif return true; @@ -95,21 +84,23 @@ bool transport_master(matrix_row_t matrix[]) { void transport_slave(matrix_row_t matrix[]) { // Copy matrix to I2C buffer - memcpy((void*)(i2c_slave_reg + I2C_KEYMAP_START), (void *)matrix, ROWS_PER_HAND * sizeof(matrix_row_t) ); + memcpy((void*)i2c_buffer->smatrix, (void *)matrix, sizeof(i2c_buffer->smatrix)); // Read Backlight Info # ifdef BACKLIGHT_ENABLE - backlight_set(i2c_slave_reg[I2C_BACKLIT_START]); + backlight_set(i2c_buffer->backlight_level); # endif -# ifdef RGBLIGHT_ENABLE - uint32_t rgb = *(uint32_t *)(i2c_slave_reg + I2C_RGB_START); +# if defined(RGBLIGHT_ENABLE) && defined(RGBLIGHT_SPLIT) // Update the RGB with the new data - rgblight_update_dword(rgb); + if (i2c_buffer->rgblight_sync.status.change_flags != 0) { + rgblight_update_sync(&i2c_buffer->rgblight_sync, false); + i2c_buffer->rgblight_sync.status.change_flags = 0; + } # endif # ifdef ENCODER_ENABLE - encoder_state_raw((uint8_t*)(i2c_slave_reg + I2C_ENCODER_START)); + encoder_state_raw(i2c_buffer->encoder_state); # endif } @@ -121,53 +112,109 @@ void transport_slave_init(void) { i2c_slave_init(SLAVE_I2C_ADDRESS); } # include "serial.h" -typedef struct __attribute__ ((__packed__)) { +typedef struct _Serial_s2m_buffer_t { + // TODO: if MATRIX_COLS > 8 change to uint8_t packed_matrix[] for pack/unpack + matrix_row_t smatrix[ROWS_PER_HAND]; + # ifdef ENCODER_ENABLE uint8_t encoder_state[NUMBER_OF_ENCODERS]; # endif - // TODO: if MATRIX_COLS > 8 change to uint8_t packed_matrix[] for pack/unpack - matrix_row_t smatrix[ROWS_PER_HAND]; + } Serial_s2m_buffer_t; -typedef struct __attribute__ ((__packed__)) { +typedef struct _Serial_m2s_buffer_t { # ifdef BACKLIGHT_ENABLE uint8_t backlight_level; # endif -# if defined(RGBLIGHT_ENABLE) && defined(RGBLED_SPLIT) - rgblight_config_t rgblight_config; // not yet use - // - // When MCUs on both sides drive their respective RGB LED chains, - // it is necessary to synchronize, so it is necessary to communicate RGB - // information. In that case, define RGBLED_SPLIT with info on the number - // of LEDs on each half. - // - // Otherwise, if the master side MCU drives both sides RGB LED chains, - // there is no need to communicate. -# endif } Serial_m2s_buffer_t; +#if defined(RGBLIGHT_ENABLE) && defined(RGBLIGHT_SPLIT) +// When MCUs on both sides drive their respective RGB LED chains, +// it is necessary to synchronize, so it is necessary to communicate RGB +// information. In that case, define RGBLIGHT_SPLIT with info on the number +// of LEDs on each half. +// +// Otherwise, if the master side MCU drives both sides RGB LED chains, +// there is no need to communicate. + +typedef struct _Serial_rgblight_t { + rgblight_syncinfo_t rgblight_sync; +} Serial_rgblight_t; + +volatile Serial_rgblight_t serial_rgblight = {}; +uint8_t volatile status_rgblight = 0; +#endif + volatile Serial_s2m_buffer_t serial_s2m_buffer = {}; volatile Serial_m2s_buffer_t serial_m2s_buffer = {}; uint8_t volatile status0 = 0; +enum serial_transaction_id { + GET_SLAVE_MATRIX = 0, +#if defined(RGBLIGHT_ENABLE) && defined(RGBLIGHT_SPLIT) + PUT_RGBLIGHT, +#endif +}; + SSTD_t transactions[] = { - { + [GET_SLAVE_MATRIX] = { (uint8_t *)&status0, sizeof(serial_m2s_buffer), (uint8_t *)&serial_m2s_buffer, sizeof(serial_s2m_buffer), (uint8_t *)&serial_s2m_buffer, }, +#if defined(RGBLIGHT_ENABLE) && defined(RGBLIGHT_SPLIT) + [PUT_RGBLIGHT] = { + (uint8_t *)&status_rgblight, + sizeof(serial_rgblight), + (uint8_t *)&serial_rgblight, + 0, NULL // no slave to master transfer + }, +#endif }; void transport_master_init(void) { soft_serial_initiator_init(transactions, TID_LIMIT(transactions)); } void transport_slave_init(void) { soft_serial_target_init(transactions, TID_LIMIT(transactions)); } +#if defined(RGBLIGHT_ENABLE) && defined(RGBLIGHT_SPLIT) + +// rgblight synchronization information communication. + +void transport_rgblight_master(void) { + if (rgblight_get_change_flags()) { + rgblight_get_syncinfo((rgblight_syncinfo_t *)&serial_rgblight.rgblight_sync); + if (soft_serial_transaction(PUT_RGBLIGHT) == TRANSACTION_END) { + rgblight_clear_change_flags(); + } + } +} + +void transport_rgblight_slave(void) { + if (status_rgblight == TRANSACTION_ACCEPTED) { + rgblight_update_sync((rgblight_syncinfo_t *)&serial_rgblight.rgblight_sync, + false); + status_rgblight = TRANSACTION_END; + } +} + +#else +#define transport_rgblight_master() +#define transport_rgblight_slave() +#endif + bool transport_master(matrix_row_t matrix[]) { - if (soft_serial_transaction()) { +#ifndef SERIAL_USE_MULTI_TRANSACTION + if (soft_serial_transaction() != TRANSACTION_END) { return false; } +#else + transport_rgblight_master(); + if (soft_serial_transaction(GET_SLAVE_MATRIX) != TRANSACTION_END) { + return false; + } +#endif // TODO: if MATRIX_COLS > 8 change to unpack() for (int i = 0; i < ROWS_PER_HAND; ++i) { @@ -179,23 +226,15 @@ bool transport_master(matrix_row_t matrix[]) { serial_m2s_buffer.backlight_level = backlight_config.enable ? backlight_config.level : 0; # endif -# if defined(RGBLIGHT_ENABLE) && defined(RGBLED_SPLIT) - static rgblight_config_t prev_rgb = {~0}; - uint32_t rgb = rgblight_read_dword(); - if (rgb != prev_rgb.raw) { - serial_m2s_buffer.rgblight_config.raw = rgb; - prev_rgb.raw = rgb; - } -# endif - # ifdef ENCODER_ENABLE - encoder_update_raw((uint8_t*)&serial_s2m_buffer.encoder_state); + encoder_update_raw((uint8_t *)serial_s2m_buffer.encoder_state); # endif return true; } void transport_slave(matrix_row_t matrix[]) { + transport_rgblight_slave(); // TODO: if MATRIX_COLS > 8 change to pack() for (int i = 0; i < ROWS_PER_HAND; ++i) { serial_s2m_buffer.smatrix[i] = matrix[i]; @@ -203,14 +242,11 @@ void transport_slave(matrix_row_t matrix[]) { # ifdef BACKLIGHT_ENABLE backlight_set(serial_m2s_buffer.backlight_level); # endif -# if defined(RGBLIGHT_ENABLE) && defined(RGBLED_SPLIT) - // Update RGB config with the new data - rgblight_update_dword(serial_m2s_buffer.rgblight_config.raw); -# endif # ifdef ENCODER_ENABLE - encoder_state_raw((uint8_t*)&serial_s2m_buffer.encoder_state); + encoder_state_raw((uint8_t *)serial_s2m_buffer.encoder_state); # endif + } #endif From 4856552f8bf3d50a95396fc76e26669ed6f3d8b4 Mon Sep 17 00:00:00 2001 From: Markus Weimar Date: Sat, 20 Apr 2019 08:18:06 +0200 Subject: [PATCH 146/171] Update mouse keys docs (#5653) --- docs/feature_mouse_keys.md | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) diff --git a/docs/feature_mouse_keys.md b/docs/feature_mouse_keys.md index 75633969ec2..363662f633b 100644 --- a/docs/feature_mouse_keys.md +++ b/docs/feature_mouse_keys.md @@ -1,6 +1,6 @@ # Mouse keys -Mouse keys is a feature that allows you to emulate a mouse using your keyboard. You can move the pointer at different speeds, press 5 buttons and scroll in all 8 directions. +Mouse keys is a feature that allows you to emulate a mouse using your keyboard. You can move the pointer at different speeds, press 5 buttons and scroll in 8 directions. ## Adding mouse keys to your keyboard @@ -37,8 +37,6 @@ In your keymap you can use the following keycodes to map key presses to mouse ac |`KC_MS_ACCEL1` |`KC_ACL1`|Set speed to 1 | |`KC_MS_ACCEL2` |`KC_ACL2`|Set speed to 2 | -For an example, see [the mouse layer in this keymap](https://github.com/qmk/qmk_firmware/blob/1df10ae3bfc146805c75b06dc0c126cd1ef3a60a/keyboards/clueboard/66/keymaps/mouse_keys/keymap.c#L40). - ## Configuring mouse keys Mouse keys supports two different modes to move the cursor: From 8170be5b10e92a4f4a8c23ad0c9dd558c4fc90c7 Mon Sep 17 00:00:00 2001 From: Len Trigg Date: Sat, 20 Apr 2019 18:33:07 +1200 Subject: [PATCH 147/171] [Keyboard] crkbd: compile time hand-dependent rgb_matrix LED declarations (#5657) Set RGB_MATRIX_SPLIT_RIGHT=yes when flashing the right hand side of the keyboard. --- keyboards/crkbd/rev1/rev1.c | 192 ++++++++++++---------------------- keyboards/crkbd/rev1/rules.mk | 6 ++ 2 files changed, 73 insertions(+), 125 deletions(-) diff --git a/keyboards/crkbd/rev1/rev1.c b/keyboards/crkbd/rev1/rev1.c index a0bc4b4c21b..0104adf1513 100644 --- a/keyboards/crkbd/rev1/rev1.c +++ b/keyboards/crkbd/rev1/rev1.c @@ -55,133 +55,75 @@ void led_set_kb(uint8_t usb_led) { * | {x=0..224, y=0..64} physical layout * | | | modifier * | | | */ - const rgb_led g_rgb_leds_left[27] = { - //LEFT - { { 0xFF }, { 85, 16 }, 0 }, // 1 - { { 0xFF }, { 50, 13 }, 0 }, // 2 - { { 0xFF }, { 16, 20 }, 0 }, // 3 - { { 0xFF }, { 16, 38 }, 0 }, // 4 - { { 0xFF }, { 50, 48 }, 0 }, // 5 - { { 0xFF }, { 85, 52 }, 0 }, // 6 +#define RGB_MATRIX_LEFT_LEDS \ + { { 0xFF }, { 85, 16 }, 0 }, /* 1 */ \ + { { 0xFF }, { 50, 13 }, 0 }, /* 2 */ \ + { { 0xFF }, { 16, 20 }, 0 }, /* 3 */ \ + { { 0xFF }, { 16, 38 }, 0 }, /* 4 */ \ + { { 0xFF }, { 50, 48 }, 0 }, /* 5 */ \ + { { 0xFF }, { 85, 52 }, 0 }, /* 6 */ \ + { { 3 | ( 5 << 4 ) }, { 95, 63 }, 1 }, /* 7 */ \ + { { 2 | ( 5 << 4 ) }, { 85, 39 }, 0 }, /* 8 */ \ + { { 1 | ( 5 << 4 ) }, { 85, 21 }, 0 }, /* 9 */ \ + { { 0 | ( 5 << 4 ) }, { 85, 4 }, 0 }, /* 10 */ \ + { { 0 | ( 4 << 4 ) }, { 68, 02 }, 0 }, /* 11 */ \ + { { 1 | ( 4 << 4 ) }, { 68, 19 }, 0 }, /* 12 */ \ + { { 2 | ( 4 << 4 ) }, { 68, 37 }, 0 }, /* 13 */ \ + { { 3 | ( 4 << 4 ) }, { 80, 58 }, 1 }, /* 14 */ \ + { { 3 | ( 3 << 4 ) }, { 60, 55 }, 1 }, /* 15 */ \ + { { 2 | ( 3 << 4 ) }, { 50, 35 }, 0 }, /* 16 */ \ + { { 1 | ( 3 << 4 ) }, { 50, 13 }, 0 }, /* 17 */ \ + { { 0 | ( 3 << 4 ) }, { 50, 0 }, 0 }, /* 18 */ \ + { { 0 | ( 2 << 4 ) }, { 33, 3 }, 0 }, /* 19 */ \ + { { 1 | ( 2 << 4 ) }, { 33, 20 }, 0 }, /* 20 */ \ + { { 2 | ( 2 << 4 ) }, { 33, 37 }, 0 }, /* 21 */ \ + { { 2 | ( 1 << 4 ) }, { 16, 42 }, 0 }, /* 22 */ \ + { { 1 | ( 1 << 4 ) }, { 16, 24 }, 0 }, /* 23 */ \ + { { 0 | ( 1 << 4 ) }, { 16, 7 }, 0 }, /* 24 */ \ + { { 0 | ( 0 << 4 ) }, { 0, 7 }, 1 }, /* 25 */ \ + { { 1 | ( 0 << 4 ) }, { 0, 24 }, 1 }, /* 26 */ \ + { { 2 | ( 0 << 4 ) }, { 0, 41 }, 1 }, /* 27 */ - { { 3 | ( 5 << 4 ) }, { 95, 63 }, 1 }, // 7 - { { 2 | ( 5 << 4 ) }, { 85, 39 }, 0 }, // 8 - { { 1 | ( 5 << 4 ) }, { 85, 21 }, 0 }, // 9 - { { 0 | ( 5 << 4 ) }, { 85, 4 }, 0 }, //10 - { { 0 | ( 4 << 4 ) }, { 68, 02 }, 0 }, //11 - { { 1 | ( 4 << 4 ) }, { 68, 19 }, 0 }, //12 - { { 2 | ( 4 << 4 ) }, { 68, 37 }, 0 }, //13 - { { 3 | ( 4 << 4 ) }, { 80, 58 }, 1 }, //14 - { { 3 | ( 3 << 4 ) }, { 60, 55 }, 1 }, //15 - { { 2 | ( 3 << 4 ) }, { 50, 35 }, 0 }, //16 - { { 1 | ( 3 << 4 ) }, { 50, 13 }, 0 }, //17 - { { 0 | ( 3 << 4 ) }, { 50, 0 }, 0 }, //18 - { { 0 | ( 2 << 4 ) }, { 33, 3 }, 0 }, //19 - { { 1 | ( 2 << 4 ) }, { 33, 20 }, 0 }, //20 - { { 2 | ( 2 << 4 ) }, { 33, 37 }, 0 }, //21 - { { 2 | ( 1 << 4 ) }, { 16, 42 }, 0 }, //22 - { { 1 | ( 1 << 4 ) }, { 16, 24 }, 0 }, //23 - { { 0 | ( 1 << 4 ) }, { 16, 7 }, 0 }, //24 - { { 0 | ( 0 << 4 ) }, { 0, 7 }, 1 }, //25 - { { 1 | ( 0 << 4 ) }, { 0, 24 }, 1 }, //26 - { { 2 | ( 0 << 4 ) }, { 0, 41 }, 1 }, //27 - }; - const rgb_led g_rgb_leds_right[27] = { - //RIGHT - { { 0xFF }, { 139, 16 }, 0 }, // 1 - { { 0xFF }, { 174, 13 }, 0 }, // 2 - { { 0xFF }, { 208, 20 }, 0 }, // 3 - { { 0xFF }, { 208, 38 }, 0 }, // 4 - { { 0xFF }, { 174, 48 }, 0 }, // 5 - { { 0xFF }, { 139, 52 }, 0 }, // 6 +#define RGB_MATRIX_RIGHT_LEDS \ + { { 0xFF }, { 139, 16 }, 0 }, /* 1 */ \ + { { 0xFF }, { 174, 13 }, 0 }, /* 2 */ \ + { { 0xFF }, { 208, 20 }, 0 }, /* 3 */ \ + { { 0xFF }, { 208, 38 }, 0 }, /* 4 */ \ + { { 0xFF }, { 174, 48 }, 0 }, /* 5 */ \ + { { 0xFF }, { 139, 52 }, 0 }, /* 6 */ \ + { { 7 | ( 5 << 4 ) }, { 129, 63 }, 1 }, /* 7 */ \ + { { 6 | ( 5 << 4 ) }, { 139, 39 }, 0 }, /* 8 */ \ + { { 5 | ( 5 << 4 ) }, { 139, 21 }, 0 }, /* 9 */ \ + { { 4 | ( 5 << 4 ) }, { 139, 4 }, 0 }, /* 10 */ \ + { { 4 | ( 4 << 4 ) }, { 156, 02 }, 0 }, /* 11 */ \ + { { 5 | ( 4 << 4 ) }, { 156, 19 }, 0 }, /* 12 */ \ + { { 6 | ( 4 << 4 ) }, { 156, 37 }, 0 }, /* 13 */ \ + { { 7 | ( 4 << 4 ) }, { 144, 58 }, 1 }, /* 14 */ \ + { { 7 | ( 3 << 4 ) }, { 164, 55 }, 1 }, /* 15 */ \ + { { 6 | ( 3 << 4 ) }, { 174, 35 }, 0 }, /* 16 */ \ + { { 5 | ( 3 << 4 ) }, { 174, 13 }, 0 }, /* 17 */ \ + { { 4 | ( 3 << 4 ) }, { 174, 0 }, 0 }, /* 18 */ \ + { { 4 | ( 2 << 4 ) }, { 191, 3 }, 0 }, /* 19 */ \ + { { 5 | ( 2 << 4 ) }, { 191, 20 }, 0 }, /* 20 */ \ + { { 6 | ( 2 << 4 ) }, { 191, 37 }, 0 }, /* 21 */ \ + { { 6 | ( 1 << 4 ) }, { 208, 42 }, 0 }, /* 22 */ \ + { { 5 | ( 1 << 4 ) }, { 208, 24 }, 0 }, /* 23 */ \ + { { 4 | ( 1 << 4 ) }, { 208, 7 }, 0 }, /* 24 */ \ + { { 4 | ( 0 << 4 ) }, { 224, 7 }, 1 }, /* 25 */ \ + { { 5 | ( 0 << 4 ) }, { 224, 24 }, 1 }, /* 26 */ \ + { { 6 | ( 0 << 4 ) }, { 224, 41 }, 1 }, /* 27 */ - { { 7 | ( 5 << 4 ) }, { 129, 63 }, 1 }, // 7 - { { 6 | ( 5 << 4 ) }, { 139, 39 }, 0 }, // 8 - { { 5 | ( 5 << 4 ) }, { 139, 21 }, 0 }, // 9 - { { 4 | ( 5 << 4 ) }, { 139, 4 }, 0 }, //10 - { { 4 | ( 4 << 4 ) }, { 156, 02 }, 0 }, //11 - { { 5 | ( 4 << 4 ) }, { 156, 19 }, 0 }, //12 - { { 6 | ( 4 << 4 ) }, { 156, 37 }, 0 }, //13 - { { 7 | ( 4 << 4 ) }, { 144, 58 }, 1 }, //14 - { { 7 | ( 3 << 4 ) }, { 164, 55 }, 1 }, //15 - { { 6 | ( 3 << 4 ) }, { 174, 35 }, 0 }, //16 - { { 5 | ( 3 << 4 ) }, { 174, 13 }, 0 }, //17 - { { 4 | ( 3 << 4 ) }, { 174, 0 }, 0 }, //18 - { { 4 | ( 2 << 4 ) }, { 191, 3 }, 0 }, //19 - { { 5 | ( 2 << 4 ) }, { 191, 20 }, 0 }, //20 - { { 6 | ( 2 << 4 ) }, { 191, 37 }, 0 }, //21 - { { 6 | ( 1 << 4 ) }, { 208, 42 }, 0 }, //22 - { { 5 | ( 1 << 4 ) }, { 208, 24 }, 0 }, //23 - { { 4 | ( 1 << 4 ) }, { 208, 7 }, 0 }, //24 - { { 4 | ( 0 << 4 ) }, { 224, 7 }, 1 }, //25 - { { 5 | ( 0 << 4 ) }, { 224, 24 }, 1 }, //26 - { { 6 | ( 0 << 4 ) }, { 224, 41 }, 1 }, //27 - - }; - - const rgb_led g_rgb_leds[DRIVER_LED_TOTAL] = { - - //LEFT - { { 0xFF }, { 85, 16 }, 0 }, // 1 - { { 0xFF }, { 50, 13 }, 0 }, // 2 - { { 0xFF }, { 16, 20 }, 0 }, // 3 - { { 0xFF }, { 16, 38 }, 0 }, // 4 - { { 0xFF }, { 50, 48 }, 0 }, // 5 - { { 0xFF }, { 85, 52 }, 0 }, // 6 - - { { 3 | ( 5 << 4 ) }, { 95, 63 }, 1 }, // 7 - { { 2 | ( 5 << 4 ) }, { 85, 39 }, 0 }, // 8 - { { 1 | ( 5 << 4 ) }, { 85, 21 }, 0 }, // 9 - { { 0 | ( 5 << 4 ) }, { 85, 4 }, 0 }, //10 - { { 0 | ( 4 << 4 ) }, { 68, 02 }, 0 }, //11 - { { 1 | ( 4 << 4 ) }, { 68, 19 }, 0 }, //12 - { { 2 | ( 4 << 4 ) }, { 68, 37 }, 0 }, //13 - { { 3 | ( 4 << 4 ) }, { 80, 58 }, 1 }, //14 - { { 3 | ( 3 << 4 ) }, { 60, 55 }, 1 }, //15 - { { 2 | ( 3 << 4 ) }, { 50, 35 }, 0 }, //16 - { { 1 | ( 3 << 4 ) }, { 50, 13 }, 0 }, //17 - { { 0 | ( 3 << 4 ) }, { 50, 0 }, 0 }, //18 - { { 0 | ( 2 << 4 ) }, { 33, 3 }, 0 }, //19 - { { 1 | ( 2 << 4 ) }, { 33, 20 }, 0 }, //20 - { { 2 | ( 2 << 4 ) }, { 33, 37 }, 0 }, //21 - { { 2 | ( 1 << 4 ) }, { 16, 42 }, 0 }, //22 - { { 1 | ( 1 << 4 ) }, { 16, 24 }, 0 }, //23 - { { 0 | ( 1 << 4 ) }, { 16, 7 }, 0 }, //24 - { { 0 | ( 0 << 4 ) }, { 0, 7 }, 1 }, //25 - { { 1 | ( 0 << 4 ) }, { 0, 24 }, 1 }, //26 - { { 2 | ( 0 << 4 ) }, { 0, 41 }, 1 }, //27 - - //RIGHT - { { 0xFF }, { 139, 16 }, 0 }, // 1 - { { 0xFF }, { 174, 13 }, 0 }, // 2 - { { 0xFF }, { 208, 20 }, 0 }, // 3 - { { 0xFF }, { 208, 38 }, 0 }, // 4 - { { 0xFF }, { 174, 48 }, 0 }, // 5 - { { 0xFF }, { 139, 52 }, 0 }, // 6 - - { { 7 | ( 5 << 4 ) }, { 129, 63 }, 1 }, // 7 - { { 6 | ( 5 << 4 ) }, { 139, 39 }, 0 }, // 8 - { { 5 | ( 5 << 4 ) }, { 139, 21 }, 0 }, // 9 - { { 4 | ( 5 << 4 ) }, { 139, 4 }, 0 }, //10 - { { 4 | ( 4 << 4 ) }, { 156, 02 }, 0 }, //11 - { { 5 | ( 4 << 4 ) }, { 156, 19 }, 0 }, //12 - { { 6 | ( 4 << 4 ) }, { 156, 37 }, 0 }, //13 - { { 7 | ( 4 << 4 ) }, { 144, 58 }, 1 }, //14 - { { 7 | ( 3 << 4 ) }, { 164, 55 }, 1 }, //15 - { { 6 | ( 3 << 4 ) }, { 174, 35 }, 0 }, //16 - { { 5 | ( 3 << 4 ) }, { 174, 13 }, 0 }, //17 - { { 4 | ( 3 << 4 ) }, { 174, 0 }, 0 }, //18 - { { 4 | ( 2 << 4 ) }, { 191, 3 }, 0 }, //19 - { { 5 | ( 2 << 4 ) }, { 191, 20 }, 0 }, //20 - { { 6 | ( 2 << 4 ) }, { 191, 37 }, 0 }, //21 - { { 6 | ( 1 << 4 ) }, { 208, 42 }, 0 }, //22 - { { 5 | ( 1 << 4 ) }, { 208, 24 }, 0 }, //23 - { { 4 | ( 1 << 4 ) }, { 208, 7 }, 0 }, //24 - { { 4 | ( 0 << 4 ) }, { 224, 7 }, 1 }, //25 - { { 5 | ( 0 << 4 ) }, { 224, 24 }, 1 }, //26 - { { 6 | ( 0 << 4 ) }, { 224, 41 }, 1 }, //27 - - }; +#ifdef RGB_MATRIX_SPLIT_RIGHT +const rgb_led g_rgb_leds[DRIVER_LED_TOTAL] = { + RGB_MATRIX_RIGHT_LEDS + RGB_MATRIX_LEFT_LEDS + }; +#else +const rgb_led g_rgb_leds[DRIVER_LED_TOTAL] = { + RGB_MATRIX_LEFT_LEDS + RGB_MATRIX_RIGHT_LEDS + }; +#endif #endif void matrix_init_kb(void) { diff --git a/keyboards/crkbd/rev1/rules.mk b/keyboards/crkbd/rev1/rules.mk index 6028b5a5b95..f12849f989d 100644 --- a/keyboards/crkbd/rev1/rules.mk +++ b/keyboards/crkbd/rev1/rules.mk @@ -1,3 +1,9 @@ +RGB_MATRIX_SPLIT_RIGHT = no # if no, order LEDs for left hand, if yes, order LEDs for right hand + +ifeq ($(strip $(RGB_MATRIX_SPLIT_RIGHT)), yes) + OPT_DEFS += -DRGB_MATRIX_SPLIT_RIGHT +endif + SRC += rev1/matrix.c SRC += rev1/split_util.c SRC += rev1/split_scomm.c From edcedd53d1bfb761cca37553729ad881f2a738e6 Mon Sep 17 00:00:00 2001 From: zvecr Date: Sat, 20 Apr 2019 07:34:13 +0100 Subject: [PATCH 148/171] [Keyboard] Add LAYOUT macro and Configurator config (#5656) --- keyboards/touchpad/info.json | 19 +++++++++++++++++++ keyboards/touchpad/keymaps/default/keymap.c | 16 ++++++++-------- keyboards/touchpad/touchpad.h | 17 +++++++++++++++++ 3 files changed, 44 insertions(+), 8 deletions(-) create mode 100644 keyboards/touchpad/info.json diff --git a/keyboards/touchpad/info.json b/keyboards/touchpad/info.json new file mode 100644 index 00000000000..625bbffd8e0 --- /dev/null +++ b/keyboards/touchpad/info.json @@ -0,0 +1,19 @@ +{ + "keyboard_name": "touchpad", + "url": "", + "maintainer": "qmk", + "width": 6, + "height": 6, + "layouts": { + "LAYOUT_ortho_6x6": { + "layout": [ + {"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":4, "y":0}, {"x":5, "y":0}, + {"x":0, "y":1}, {"x":1, "y":1}, {"x":2, "y":1}, {"x":3, "y":1}, {"x":4, "y":1}, {"x":5, "y":1}, + {"x":0, "y":2}, {"x":1, "y":2}, {"x":2, "y":2}, {"x":3, "y":2}, {"x":4, "y":2}, {"x":5, "y":2}, + {"x":0, "y":3}, {"x":1, "y":3}, {"x":2, "y":3}, {"x":3, "y":3}, {"x":4, "y":3}, {"x":5, "y":3}, + {"x":0, "y":4}, {"x":1, "y":4}, {"x":2, "y":4}, {"x":3, "y":4}, {"x":4, "y":4}, {"x":5, "y":4}, + {"x":0, "y":5}, {"x":1, "y":5}, {"x":2, "y":5}, {"x":3, "y":5}, {"x":4, "y":5}, {"x":5, "y":5} + ] + } + } +} \ No newline at end of file diff --git a/keyboards/touchpad/keymaps/default/keymap.c b/keyboards/touchpad/keymaps/default/keymap.c index 92f772aaa8c..7fcaa70c5d4 100644 --- a/keyboards/touchpad/keymaps/default/keymap.c +++ b/keyboards/touchpad/keymaps/default/keymap.c @@ -18,13 +18,13 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { -[0] = { - { KC_A, KC_B, KC_C, KC_D, KC_E, KC_F }, - { KC_A, KC_B, KC_C, KC_D, KC_E, KC_F }, - { KC_A, KC_B, KC_C, KC_D, KC_E, KC_F }, - { KC_A, KC_B, KC_C, KC_D, KC_E, KC_F }, - { KC_A, KC_B, KC_C, KC_D, KC_E, KC_F }, - { KC_A, KC_B, KC_C, KC_D, KC_E, KC_F } -} + [0] = LAYOUT_ortho_6x6( + KC_A, KC_B, KC_C, KC_D, KC_E, KC_F, + KC_A, KC_B, KC_C, KC_D, KC_E, KC_F, + KC_A, KC_B, KC_C, KC_D, KC_E, KC_F, + KC_A, KC_B, KC_C, KC_D, KC_E, KC_F, + KC_A, KC_B, KC_C, KC_D, KC_E, KC_F, + KC_A, KC_B, KC_C, KC_D, KC_E, KC_F + ) }; diff --git a/keyboards/touchpad/touchpad.h b/keyboards/touchpad/touchpad.h index 010d4b1383a..97b59a033c4 100644 --- a/keyboards/touchpad/touchpad.h +++ b/keyboards/touchpad/touchpad.h @@ -1,2 +1,19 @@ #pragma once #include "quantum.h" + +#define LAYOUT_ortho_6x6( \ + K00, K01, K02, K03, K04, K05, \ + K10, K11, K12, K13, K14, K15, \ + K20, K21, K22, K23, K24, K25, \ + K30, K31, K32, K33, K34, K35, \ + K40, K41, K42, K43, K44, K45, \ + K50, K51, K52, K53, K54, K55 \ +) \ +{ \ + { K00, K01, K02, K03, K04, K05 }, \ + { K10, K11, K12, K13, K14, K15 }, \ + { K20, K21, K22, K23, K24, K25 }, \ + { K30, K31, K32, K33, K34, K35 }, \ + { K40, K41, K42, K43, K44, K45 }, \ + { K50, K51, K52, K53, K54, K55 } \ +} From ed74bd95f641754d3f9a2949fc333590522210aa Mon Sep 17 00:00:00 2001 From: Rys Sommefeldt Date: Sat, 20 Apr 2019 07:35:46 +0100 Subject: [PATCH 149/171] [Keymap] Make the layout friendlier for use with the iPad (#5654) * Make the layout more similar to Apple keyboards to make it friendlier for using with an iPad * Fix config.h pragma, plus second layer mistakes --- keyboards/tada68/keymaps/mattgemmell/config.h | 3 ++ keyboards/tada68/keymaps/mattgemmell/keymap.c | 28 +++++++++---------- 2 files changed, 17 insertions(+), 14 deletions(-) create mode 100644 keyboards/tada68/keymaps/mattgemmell/config.h diff --git a/keyboards/tada68/keymaps/mattgemmell/config.h b/keyboards/tada68/keymaps/mattgemmell/config.h new file mode 100644 index 00000000000..f4b045cd32e --- /dev/null +++ b/keyboards/tada68/keymaps/mattgemmell/config.h @@ -0,0 +1,3 @@ +#pragma once + +#define GRAVE_ESC_GUI_OVERRIDE diff --git a/keyboards/tada68/keymaps/mattgemmell/keymap.c b/keyboards/tada68/keymaps/mattgemmell/keymap.c index f446ddc5d2d..1a8021ea402 100644 --- a/keyboards/tada68/keymaps/mattgemmell/keymap.c +++ b/keyboards/tada68/keymaps/mattgemmell/keymap.c @@ -6,43 +6,43 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { /* Keymap _BL: (Base Layer) Default Layer * ,----------------------------------------------------------------. - * |Esc | 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =|Backsp |~ ` | + * |Esc | 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =|Backsp | § | * |----------------------------------------------------------------| * |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| |Del | * |------------------------------------------------------- -----| - * |CAPS | A| S| D| F| G| H| J| K| L| ;| '| #|Entr|PgUp| + * |CAPS | A| S| D| F| G| H| J| K| L| ;| '| \ |Entr|PgUp| * |----------------------------------------------------------------| - * |Shift| \ | Z| X| C| V| B| N| M| ,| .| /|Rshift|Up|PgDn| + * |Shift| ` | Z| X| C| V| B| N| M| ,| .| /|Rshift|Up|PgDn| * |----------------------------------------------------------------| * |Ctrl|Alt |LGUI| Space |Alt| FN|Ctrl|Lef|Dow|Rig | * `----------------------------------------------------------------' */ [_BL] = LAYOUT_iso( - KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_GRV, \ + KC_GESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_NUBS, \ KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_DEL, \ KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_NUHS, KC_ENT, KC_PGUP, \ - KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_PGDN, \ + KC_LSFT, KC_GRV, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_PGDN, \ KC_LCTL, KC_LALT, KC_LGUI, KC_SPC, KC_RALT, MO(_FL), KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT ), /* Keymap _FL1: Function Layer 1 * ,----------------------------------------------------------------. - * | | F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12| | :D | + * | | F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12| |BR↑ | * |----------------------------------------------------------------| - * | |LMB| Up|RMB| | | | | | | | | | | | + * | | | | | | | | | | | | | | |BR↓ | * |------------------------------------------------------- -----| - * | |Lef|Dow|Rig| | | | | | | | | | |Home| + * | | | | | | | | | | | | | | |Home| * |----------------------------------------------------------------| - * | | | | | L+|LED| L-| | V+| V-|Mut| | MsBtn|↑ | End| + * | | | | | L+|LED| L-| | | V↓| V↑|Mut| | ↑ | End| * |----------------------------------------------------------------| - * | | | | Reset | | | | ← | ↓ | → | + * | | | | | | | | ← | ↓ | → | * `----------------------------------------------------------------' */ [_FL] = LAYOUT_iso( - _______, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, _______, \ - _______, KC_BTN1, KC_UP, KC_BTN2, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ - _______, KC_LEFT, KC_DOWN, KC_RGHT, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_HOME, \ - _______, _______, _______, _______, BL_DEC, BL_TOGG, BL_INC, _______, KC_VOLU, KC_VOLD, KC_MUTE, _______, _______, KC_MS_U, KC_END, \ + _______, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, KC_BRMU, \ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_BRMD, \ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_HOME, \ + _______, _______, _______, _______, BL_DEC, BL_TOGG, BL_INC, _______, _______, KC_VOLD, KC_VOLU, KC_MUTE, _______, KC_MS_U, KC_END, \ _______, _______, _______, _______, _______, _______, _______, KC_MS_L, KC_MS_D, KC_MS_R ), }; From a1f251405183c39ade3b149a906b2b85162174ab Mon Sep 17 00:00:00 2001 From: Jan Christoph Ebersbach Date: Sat, 20 Apr 2019 08:37:19 +0200 Subject: [PATCH 150/171] [Keyboard] Layout and configuration updates for Signum 3.0 (#5652) * Make Signum 3.0 compatible with default ortho_4x12 layout * Disable unicode map by default * Add missing backspace key * Add missing delete key * Fix broken gui right command * Move MO5 to a different key an add Esc to L4 * Move MO5 to a different key * Add Del and Bspace to layer 4 --- keyboards/signum/3_0/elitec/elitec.h | 2 +- keyboards/signum/3_0/elitec/info.json | 35 ++++++++--------- .../3_0/elitec/keymaps/default/generate_km.py | 2 +- .../3_0/elitec/keymaps/default/keymap.c | 38 +++++++++---------- .../3_0/elitec/keymaps/default/layout.py | 12 +++--- .../3_0/elitec/keymaps/default/rules.mk | 1 + keyboards/signum/3_0/elitec/rules.mk | 4 +- 7 files changed, 49 insertions(+), 45 deletions(-) create mode 100644 keyboards/signum/3_0/elitec/keymaps/default/rules.mk diff --git a/keyboards/signum/3_0/elitec/elitec.h b/keyboards/signum/3_0/elitec/elitec.h index 1749969de35..d28d3d47697 100644 --- a/keyboards/signum/3_0/elitec/elitec.h +++ b/keyboards/signum/3_0/elitec/elitec.h @@ -2,7 +2,7 @@ #include "quantum.h" -#define LAYOUT( \ +#define LAYOUT_ortho_4x12( \ K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, \ K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, \ K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, \ diff --git a/keyboards/signum/3_0/elitec/info.json b/keyboards/signum/3_0/elitec/info.json index e93dceb13c7..e414d15967b 100644 --- a/keyboards/signum/3_0/elitec/info.json +++ b/keyboards/signum/3_0/elitec/info.json @@ -5,7 +5,8 @@ "width": 17, "height": 8, "layouts": { - "LAYOUT": { + "LAYOUT_ortho_4x12": { + "key_count": 48, "layout": [ { "x": 1.25, "y": 0.75, "r": 15 }, @@ -13,15 +14,15 @@ { "x": 1.25, "y": 2.75, "r": 15 }, { "x": 1.25, "y": 4.25, "r": 15 }, - { "x": 2.25, "y": 0.5, "r": 15 }, - { "x": 2.25, "y": 1.5, "r": 15 }, - { "x": 2.25, "y": 2.5, "r": 15 }, - { "x": 2.25, "y": 3.5, "r": 15 }, + { "x": 2.25, "y": 0.75, "r": 15 }, + { "x": 2.25, "y": 1.75, "r": 15 }, + { "x": 2.25, "y": 2.75, "r": 15 }, + { "x": 2.25, "y": 3.75, "r": 15 }, - { "x": 3.25, "y": 0, "r": 15 }, - { "x": 3.25, "y": 1, "r": 15 }, - { "x": 3.25, "y": 2, "r": 15 }, - { "x": 3.25, "y": 3, "r": 15 }, + { "x": 3.25, "y": 0.5, "r": 15 }, + { "x": 3.25, "y": 1.5, "r": 15 }, + { "x": 3.25, "y": 2.5, "r": 15 }, + { "x": 3.25, "y": 3.5, "r": 15 }, { "x": 4.25, "y": 0.25, "r": 15 }, { "x": 4.25, "y": 1.25, "r": 15 }, @@ -55,15 +56,15 @@ { "x": 11.25, "y": 1.25, "r": -15 }, { "x": 11.25, "y": 2.25, "r": -15 }, - { "x": 12.25, "y": 0, "r": -15 }, - { "x": 12.25, "y": 1, "r": -15 }, - { "x": 12.25, "y": 2, "r": -15 }, - { "x": 12.25, "y": 3, "r": -15 }, + { "x": 12.25, "y": 0.5, "r": -15 }, + { "x": 12.25, "y": 1.5, "r": -15 }, + { "x": 12.25, "y": 2.5, "r": -15 }, + { "x": 12.25, "y": 3.5, "r": -15 }, - { "x": 13.25, "y": 0.5, "r": -15 }, - { "x": 13.25, "y": 1.5, "r": -15 }, - { "x": 13.25, "y": 2.5, "r": -15 }, - { "x": 13.25, "y": 3.5, "r": -15 }, + { "x": 13.25, "y": 0.75, "r": -15 }, + { "x": 13.25, "y": 1.75, "r": -15 }, + { "x": 13.25, "y": 2.75, "r": -15 }, + { "x": 13.25, "y": 3.75, "r": -15 }, { "x": 14.25, "y": 0.75, "r": -15 }, { "x": 14.25, "y": 1.75, "r": -15 }, diff --git a/keyboards/signum/3_0/elitec/keymaps/default/generate_km.py b/keyboards/signum/3_0/elitec/keymaps/default/generate_km.py index 5147121b34d..7778da8f554 100755 --- a/keyboards/signum/3_0/elitec/keymaps/default/generate_km.py +++ b/keyboards/signum/3_0/elitec/keymaps/default/generate_km.py @@ -104,7 +104,7 @@ if __name__ == "__main__": output.write(" * -------------------------------------------------\n") output.write(" */\n") - l_code = '\tLAYOUT(\n' + l_code = '\tLAYOUT_ortho_4x12(\n' for r in range(r_counter): r_counter -= 1 c_counter = 12 diff --git a/keyboards/signum/3_0/elitec/keymaps/default/keymap.c b/keyboards/signum/3_0/elitec/keymaps/default/keymap.c index d7feba349a6..22d60085f4c 100644 --- a/keyboards/signum/3_0/elitec/keymaps/default/keymap.c +++ b/keyboards/signum/3_0/elitec/keymaps/default/keymap.c @@ -634,7 +634,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { * MO2 LGui LAlt | TT2 |LT6_SPC| TT4 | Enter | Space | TT2 | RAlt RGui RCtrl * ------------------------------------------------- */ - LAYOUT( + LAYOUT_ortho_4x12( KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_LCTRL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_LSPO, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSPC, @@ -652,7 +652,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { * MO2 LGui LAlt | TT2 |LT6_SPC| TT4 | Enter | Space | TT2 | RAlt RGui RCtrl * ------------------------------------------------- */ - LAYOUT( + LAYOUT_ortho_4x12( KC_TAB, KC_Q, KC_W, KC_F, KC_P, KC_G, KC_J, KC_L, KC_U, KC_Y, KC_SCLN, KC_LBRC, KC_LCTRL, KC_A, KC_R, KC_S, KC_T, KC_D, KC_H, KC_N, KC_E, KC_I, KC_O, KC_QUOT, KC_LSPO, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_K, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSPC, @@ -665,16 +665,16 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { * ------------------------------------------------- ------------------------------------------------- * | | DF0 | DF1 | XXX | XXX | MO3 | | 4 | 4 | 5 | 6 | - | = | * ------------------------------------------------- ------------------------------------------------- - * | | MO5 | XXX | XXX | XXX | XXX | | 1 | 1 | 2 | 3 | \ | | + * | | XXX | XXX | XXX | XXX | MO5 | | 1 | 1 | 2 | 3 | \ | | * ----------------------------------------------------------------------------------------------------------------- - * TG2 | | | | | | 0 | + * TG2 | | Del | | |BSpace | 0 | * ------------------------------------------------- */ - LAYOUT( + LAYOUT_ortho_4x12( KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_RBRC, KC_TRNS, DF(0), DF(1), XXXXXXX, XXXXXXX, MO(3), KC_4, KC_4, KC_5, KC_6, KC_MINS, KC_EQL, - KC_TRNS, MO(5), XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_1, KC_1, KC_2, KC_3, KC_BSLS, KC_TRNS, - TG(2), KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_0, KC_TRNS, KC_TRNS, KC_TRNS + KC_TRNS, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, MO(5), KC_1, KC_1, KC_2, KC_3, KC_BSLS, KC_TRNS, + TG(2), KC_TRNS, KC_TRNS, KC_TRNS, KC_DEL, KC_TRNS, KC_TRNS, KC_BSPC, KC_0, KC_TRNS, KC_TRNS, KC_TRNS ), /* Layer 3 @@ -688,7 +688,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { * TG3 | | | | F10 | F11 | F12 | * ------------------------------------------------- */ - LAYOUT( + LAYOUT_ortho_4x12( KC_TRNS, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, XXXXXXX, KC_TRNS, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, MO(3), KC_F4, KC_F4, KC_F5, KC_F6, XXXXXXX, XXXXXXX, KC_TRNS, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_F1, KC_F1, KC_F2, KC_F3, XXXXXXX, KC_TRNS, @@ -697,20 +697,20 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { /* Layer 4 * ------------------------------------------------- ------------------------------------------------- - * | | Esc | Tab x | Tab n |CPg Dn |CPg Dn | |Pg Down| Home |^ Arrow|Insert |SInsert| Esc | + * | Esc | Esc | Tab x | Tab n |CPg Dn |CPg Dn | |Pg Down| Home |^ Arrow|Insert |SInsert| Esc | * ------------------------------------------------- ------------------------------------------------- - * | | Caps | < Gui |Gui Tab| 💥 | 💥 | |< Arrow|< Arrow|v Arrow|> Arrow| End |Pr Scr | + * | | Caps | < Gui |Gui Tab| > Gui | > Gui | |< Arrow|< Arrow|v Arrow|> Arrow| End |Pr Scr | * ------------------------------------------------- ------------------------------------------------- * | | XXX | XXX | XXX |CPg Up |CPg Up | | Pg Up | XXX |v Arrow| XXX | App | | * ----------------------------------------------------------------------------------------------------------------- - * TG4 | | | | | | | + * TG4 | | Del | | |BSpace | | * ------------------------------------------------- */ - LAYOUT( - KC_TRNS, KC_ESC, LCTL(KC_W), LCTL(KC_T), CTL_T(KC_PGDN), CTL_T(KC_PGDN), KC_PGDN, KC_HOME, KC_UP, KC_INS, SFT_T(KC_INS), KC_ESC, - KC_TRNS, KC_CAPS, LGUI_T(KC_RIGHT), LGUI_T(KC_TAB), XXXXXXX, XXXXXXX, KC_LEFT, KC_LEFT, KC_DOWN, KC_RIGHT, KC_END, KC_PSCR, + LAYOUT_ortho_4x12( + KC_ESC, KC_ESC, LCTL(KC_W), LCTL(KC_T), CTL_T(KC_PGDN), CTL_T(KC_PGDN), KC_PGDN, KC_HOME, KC_UP, KC_INS, SFT_T(KC_INS), KC_ESC, + KC_TRNS, KC_CAPS, LGUI_T(KC_LEFT), LGUI_T(KC_TAB), LGUI_T(KC_RIGHT), LGUI_T(KC_RIGHT), KC_LEFT, KC_LEFT, KC_DOWN, KC_RIGHT, KC_END, KC_PSCR, KC_TRNS, XXXXXXX, XXXXXXX, XXXXXXX, CTL_T(KC_PGUP), CTL_T(KC_PGUP), KC_PGUP, XXXXXXX, KC_DOWN, XXXXXXX, KC_APP, KC_TRNS, - TG(4), KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS + TG(4), KC_TRNS, KC_TRNS, KC_TRNS, KC_DEL, KC_TRNS, KC_TRNS, KC_BSPC, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS ), /* Layer 5 @@ -719,15 +719,15 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { * ------------------------------------------------- ------------------------------------------------- * | | XXX | |<< | Vol 0 | >>| | XXX | | XXX | XXX | XXX | XXX | XXX | Sleep | * ------------------------------------------------- ------------------------------------------------- - * | | XXX | XXX | Vol - | Vol - | XXX | | XXX | XXX | XXX | XXX | XXX | XXX | + * | | XXX | XXX | Vol - | Vol - | MO5 | | XXX | XXX | XXX | XXX | XXX | XXX | * ----------------------------------------------------------------------------------------------------------------- * TG5 | | | | | | | * ------------------------------------------------- */ - LAYOUT( + LAYOUT_ortho_4x12( KC_TRNS, XXXXXXX, KC_MPLY, KC_VOLU, KC_VOLU, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, RESET, KC_PWR, KC_TRNS, XXXXXXX, KC_MPRV, KC_MUTE, KC_MNXT, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_SLEP, - KC_TRNS, XXXXXXX, XXXXXXX, KC_VOLD, KC_VOLD, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, + KC_TRNS, XXXXXXX, XXXXXXX, KC_VOLD, KC_VOLD, MO(5), XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, TG(5), KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS ), @@ -742,7 +742,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { * TG6 | | | | | | | * ------------------------------------------------- */ - LAYOUT( + LAYOUT_ortho_4x12( KC_TRNS, KC_ACL1, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_WH_U, KC_WH_L, KC_MS_U, KC_WH_R, XXXXXXX, XXXXXXX, KC_TRNS, KC_ACL2, KC_BTN3, KC_BTN2, KC_BTN1, KC_BTN1, KC_MS_L, KC_MS_L, KC_MS_D, KC_MS_R, XXXXXXX, XXXXXXX, KC_TRNS, KC_ACL0, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_WH_D, XXXXXXX, KC_MS_D, XXXXXXX, XXXXXXX, KC_TRNS, diff --git a/keyboards/signum/3_0/elitec/keymaps/default/layout.py b/keyboards/signum/3_0/elitec/keymaps/default/layout.py index 937fc172ce7..323a5832126 100644 --- a/keyboards/signum/3_0/elitec/keymaps/default/layout.py +++ b/keyboards/signum/3_0/elitec/keymaps/default/layout.py @@ -402,7 +402,7 @@ qmk_dict = { "Undo": "LCTL(KC_Z)", "Cut": "LCTL(KC_X)", "Copy": "LCTL(KC_C)", "Paste": "LCTL(KC_V)", "< Tab": "LCTL(S(KC_TAB))", "> Tab": "LCTL(KC_TAB)", "Tab x": "LCTL(KC_W)", "Tab n": "LCTL(KC_T)", - "Gui Tab": "LGUI_T(KC_TAB)", "< Gui": "LGUI_T(KC_LEFT)", "< Gui": "LGUI_T(KC_RIGHT)", + "Gui Tab": "LGUI_T(KC_TAB)", "< Gui": "LGUI_T(KC_LEFT)", "> Gui": "LGUI_T(KC_RIGHT)", "C+A+Del": "LCTL(LALT(KC_DEL))", "Mic 0": "LCTL(KC_M)", "Power": "KC_PWR", "Sleep": "KC_SLEP", @@ -446,8 +446,8 @@ colemak = [ numpad = [ ["`", "1", "2", "3", "4", "5", "6", "7", "8", "9", "0", "]"], ["", "DF0", "DF1", "XXX", "XXX", "MO3", "4", "4", "5", "6", "-", "="], - ["", "MO5", "XXX", "XXX", "XXX", "XXX", "1", "1", "2", "3", "\\", ""], - ["TG2", "", "", "", "", "", "", "", "0", "", "", ""], + ["", "XXX", "XXX", "XXX", "XXX", "MO5", "1", "1", "2", "3", "\\", ""], + ["TG2", "", "", "", "Del", "", "", "BSpace", "0", "", "", ""], ] # 3 @@ -460,17 +460,17 @@ fpad = [ # 4 movement = [ - ["", "Esc", "Tab x", "Tab n", "CPg Dn", "CPg Dn", "Pg Down", "Home", "^ Arrow", "Insert", "SInsert", "Esc"], + ["Esc", "Esc", "Tab x", "Tab n", "CPg Dn", "CPg Dn", "Pg Down", "Home", "^ Arrow", "Insert", "SInsert", "Esc"], ["", "Caps", "< Gui", "Gui Tab", "> Gui", "> Gui", "< Arrow", "< Arrow", "v Arrow", "> Arrow", "End", "Pr Scr"], ["", "XXX", "XXX", "XXX", "CPg Up", "CPg Up", "Pg Up", "XXX", "v Arrow", "XXX", "App", ""], - ["TG4", "", "", "", "", "", "", "", "", "", "", ""], + ["TG4", "", "", "", "Del", "", "", "BSpace", "", "", "", ""], ] # 5 media = [ ["", "XXX", "play/ps", "Vol +", "Vol +", "XXX", "XXX", "XXX", "XXX", "XXX", "_reset", "Power"], ["", "XXX", "|<<", "Vol 0", ">>|", "XXX", "XXX", "XXX", "XXX", "XXX", "XXX", "Sleep"], - ["", "XXX", "XXX", "Vol -", "Vol -", "XXX", "XXX", "XXX", "XXX", "XXX", "XXX", "XXX"], + ["", "XXX", "XXX", "Vol -", "Vol -", "MO5", "XXX", "XXX", "XXX", "XXX", "XXX", "XXX"], ["TG5", "", "", "", "", "", "", "", "", "", "", ""], ] diff --git a/keyboards/signum/3_0/elitec/keymaps/default/rules.mk b/keyboards/signum/3_0/elitec/keymaps/default/rules.mk new file mode 100644 index 00000000000..502b2def762 --- /dev/null +++ b/keyboards/signum/3_0/elitec/keymaps/default/rules.mk @@ -0,0 +1 @@ +UNICODEMAP_ENABLE = yes diff --git a/keyboards/signum/3_0/elitec/rules.mk b/keyboards/signum/3_0/elitec/rules.mk index d2f987b2029..6a68eb443bc 100644 --- a/keyboards/signum/3_0/elitec/rules.mk +++ b/keyboards/signum/3_0/elitec/rules.mk @@ -59,4 +59,6 @@ BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality AUDIO_ENABLE = no RGBLIGHT_ENABLE = no -UNICODEMAP_ENABLE = yes +UNICODEMAP_ENABLE = no + +LAYOUTS = ortho_4x12 From b5cb5ec6ddb15cfe336b835055f546f72d440a66 Mon Sep 17 00:00:00 2001 From: zvecr Date: Sat, 20 Apr 2019 16:02:59 +0100 Subject: [PATCH 151/171] Fix koyu readme encoding (#5655) --- keyboards/rama/koyu/readme.md | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/keyboards/rama/koyu/readme.md b/keyboards/rama/koyu/readme.md index 0372747f580..c249bf11b62 100644 --- a/keyboards/rama/koyu/readme.md +++ b/keyboards/rama/koyu/readme.md @@ -2,13 +2,13 @@ ![RAMA KOYU](https://static1.squarespace.com/static/563c788ae4b099120ae219e2/t/5b8bd6e6b8a045c95eac2003/1535891375794/RW-KOYU-A-RENDER-04-TOP.1335.jpg?format=1500w) -The wait for something isnt the most conscious desire, but that anticipation creates nostalgia. +The 'wait' for something isn't the most conscious desire, but that anticipation creates nostalgia. -At Rama Works, youve embraced this. From updates of the blog, to direct communication with the community, being part of a Rama Works product doesnt just start when you receive it. If youve ever received a Rama Works product, you know that no detail is overlooked. +At Rama Works, you've embraced this. From updates of the blog, to direct communication with the community, being part of a Rama Works product doesn't just start when you receive it. If you've ever received a Rama Works product, you know that no detail is overlooked. -Let us take you on a journey that will capture that sensory experience, and explore the gravitational interaction between aesthetic and design. The Rama Works X element personifies the understanding that taking something away doesnt necessarily make it less. +Let us take you on a journey that will capture that sensory experience, and explore the gravitational interaction between aesthetic and design. The Rama Works 'X' element personifies the understanding that taking something away doesn't necessarily make it less. -This is the sound of Rama Works. Never too busya feeling of delightful modern weightlessness. A rich sonic experience. Sparse and ethereal, this music boldly inhabits a nondescript, borderless space. Warm, synthetic textures, bespoke musical sound design. percussive elements percolating and accentuating movement on the screen and in the stereo field. a sonic palette full of clicks, taps and resonances evoking a sense of calm comfort and familiarity. +This is the sound of Rama Works. Never too busy-a feeling of delightful modern weightlessness. A rich sonic experience. Sparse and ethereal, this music boldly inhabits a nondescript, borderless space. Warm, synthetic textures, bespoke musical sound design. percussive elements percolating and accentuating movement on the screen and in the stereo field. a sonic palette full of clicks, taps and resonances evoking a sense of calm comfort and familiarity. [More info at RAMA WORKS](https://rama.works/koyu/) From 0a645225b9c863a106921185a6c2e0c340f10694 Mon Sep 17 00:00:00 2001 From: Ryan Caltabiano Date: Mon, 15 Apr 2019 22:32:57 -0500 Subject: [PATCH 152/171] OLED Driver Feature --- common_features.mk | 7 + docs/feature_oled_driver.md | 246 ++++++++ docs/hardware_drivers.md | 6 +- drivers/arm/i2c_master.c | 40 +- drivers/arm/i2c_master.h | 20 +- drivers/avr/i2c_master.c | 4 +- drivers/avr/i2c_master.h | 6 +- drivers/oled/glcdfont.c | 240 ++++++++ drivers/oled/oled_driver.c | 528 ++++++++++++++++++ drivers/oled/oled_driver.h | 183 ++++++ .../cannonkeys/satisfaction75/i2c_master.c | 46 +- keyboards/sol/common/glcdfont.c | 134 +++-- keyboards/sol/common/ssd1306.c | 329 ----------- keyboards/sol/common/ssd1306.h | 92 --- keyboards/sol/i2c.c | 162 ------ keyboards/sol/i2c.h | 49 -- keyboards/sol/keymaps/brianweyer/config.h | 2 - keyboards/sol/keymaps/brianweyer/keymap.c | 148 ++--- keyboards/sol/keymaps/brianweyer/rules.mk | 14 +- keyboards/sol/keymaps/danielhklein/keymap.c | 145 ++--- keyboards/sol/keymaps/danielhklein/rules.mk | 8 +- keyboards/sol/keymaps/default/keymap.c | 145 ++--- keyboards/sol/keymaps/default/rules.mk | 8 +- keyboards/sol/keymaps/kageurufu/rules.mk | 7 +- keyboards/sol/rev1/config.h | 6 - keyboards/sol/rev1/rev1.c | 7 - keyboards/sol/rev1/split_util.h | 2 - keyboards/sol/rules.mk | 7 +- quantum/quantum.c | 13 + quantum/quantum.h | 4 + 30 files changed, 1538 insertions(+), 1070 deletions(-) create mode 100644 docs/feature_oled_driver.md create mode 100644 drivers/oled/glcdfont.c create mode 100644 drivers/oled/oled_driver.c create mode 100644 drivers/oled/oled_driver.h delete mode 100644 keyboards/sol/common/ssd1306.c delete mode 100644 keyboards/sol/common/ssd1306.h delete mode 100644 keyboards/sol/i2c.c delete mode 100644 keyboards/sol/i2c.h diff --git a/common_features.mk b/common_features.mk index eb623d18fa6..fbfbc3ebc60 100644 --- a/common_features.mk +++ b/common_features.mk @@ -336,3 +336,10 @@ ifeq ($(strip $(SPLIT_KEYBOARD)), yes) endif COMMON_VPATH += $(QUANTUM_PATH)/split_common endif + +ifeq ($(strip $(OLED_DRIVER_ENABLE)), yes) + OPT_DEFS += -DOLED_DRIVER_ENABLE + COMMON_VPATH += $(DRIVER_PATH)/oled + QUANTUM_LIB_SRC += i2c_master.c + SRC += oled_driver.c +endif diff --git a/docs/feature_oled_driver.md b/docs/feature_oled_driver.md new file mode 100644 index 00000000000..f261bbef18e --- /dev/null +++ b/docs/feature_oled_driver.md @@ -0,0 +1,246 @@ +# OLED Driver + +## OLED Supported Hardware + +128x32 OLED modules using SSD1306 driver IC over I2C. Supported on AVR based keyboards. Possible but untested hardware includes ARM based keyboards and other sized OLED modules using SSD1306 over I2C, such as 128x64. + +!> Warning: This OLED Driver currently uses the new i2c_master driver from split common code. If your split keyboard uses i2c to communication between sides this driver could cause an address conflict (serial is fine). Please contact your keyboard vendor and ask them to migrate to the latest split common code to fix this. + +## Usage + +To enable the OLED feature, there are three steps. First, when compiling your keyboard, you'll need to set `OLED_DRIVER_ENABLE=yes` in `rules.mk`, e.g.: + +``` +BOOTMAGIC_ENABLE = no +MOUSEKEY_ENABLE = no +STENO_ENABLE = no +EXTRAKEY_ENABLE = yes +OLED_DRIVER_ENABLE = yes +``` + +This enables the feature and the `OLED_DRIVER_ENABLE` define. Then in your `keymap.c` file, you will need to implement the user task call, e.g: + +```C++ +#ifdef OLED_DRIVER_ENABLE +void oled_task_user(void) { + // Host Keyboard Layer Status + oled_write_P(PSTR("Layer: "), false); + switch (biton32(layer_state)) { + case _QWERTY: + oled_write_P(PSTR("Default\n"), false); + break; + case _FN: + oled_write_P(PSTR("FN\n"), false); + break; + case _ADJ: + oled_write_P(PSTR("ADJ\n"), false); + break; + default: + // Or use the write_ln shortcut + oled_write_P(PSTR("Undefined\n"), false); + } + + // Host Keyboard LED Status + uint8_t led_usb_state = host_keyboard_leds(); + oled_write_P(led_usb_state & (1<Requires user to implement the below defines. | +|`OLED_DISPLAY_WIDTH` |`128` |The width of the OLED display. | +|`OLED_DISPLAY_HEIGHT` |`32` |The height of the OLED display. | +|`OLED_MATRIX_SIZE` |`512` |The local buffer size to allocate.
`(OLED_DISPLAY_HEIGHT / 8 * OLED_DISPLAY_WIDTH)`| +|`OLED_BLOCK_TYPE` |`uint8_t` |The unsigned integer type to use for dirty rendering.| +|`OLED_BLOCK_COUNT` |`8` |The number of blocks the display is divided into for dirty rendering.
`(sizeof(OLED_BLOCK_TYPE) * 8)`| +|`OLED_BLOCK_SIZE` |`64` |The size of each block for dirty rendering
`(OLED_MATRIX_SIZE / OLED_BLOCK_COUNT)`| +|`OLED_SOURCE_MAP` |`{ 0, ... N }` |Precalculated source array to use for mapping source buffer to target OLED memory in 90 degree rendering. | +|`OLED_TARGET_MAP` |`{ 48, ... N }`|Precalculated target array to use for mapping source buffer to target OLED memory in 90 degree rendering. | + + +### 90 Degree Rotation - Technical Mumbo Jumbo + + OLED displays driven by SSD1306 drivers only natively support in hard ware 0 degree and 180 degree rendering. This feature is done in software and not free. Using this feature will increase the time to calculate what data to send over i2c to the OLED. If you are strapped for cycles, this can cause keycodes to not register. In testing however, the rendering time on an `atmega32u4` board only went from 2ms to 5ms and keycodes not registering was only noticed once we hit 15ms. + + 90 Degree Rotated Rendering is achieved by using bitwise operations to rotate each 8 block of memory and uses two precalculated arrays to remap buffer memory to OLED memory. The memory map defines are precalculated for remap performance and are calculated based on the OLED Height, Width, and Block Size. For example, in the default 128x32 implementation we have a 64 byte block size. This gives us eight 8 byte blocks that need to be rotated and rendered. The OLED renders horizontally two 8 byte blocks before moving down a page, e.g: + +| | | | | | | +|---|---|---|---|---|---| +| 0 | 1 | | | | | +| 2 | 3 | | | | | +| 4 | 5 | | | | | +| 6 | 7 | | | | | + +However the local buffer is stored as if it was Height x Width display instead of Width x Height, e.g: + +| | | | | | | +|---|---|---|---|---|---| +| 3 | 7 | | | | | +| 2 | 6 | | | | | +| 1 | 5 | | | | | +| 0 | 4 | | | | | + +So those precalculated arrays just index the memory offsets in the order in which each one iterates its data. + +## OLED API + +```C++ +// Initialize the OLED display, rotating the rendered output 180 degrees if true. +// Returns true if the OLED was initialized successfully +bool oled_init(bool flip180); + +// Called at the start of oled_init, weak function overridable by the user +// flip180 - the value passed into oled_init +// Return true if you want the oled to be flip180 +bool oled_init_user(bool flip180); + +// Clears the display buffer, resets cursor position to 0, and sets the buffer to dirty for rendering +void oled_clear(void); + +// Renders the dirty chunks of the buffer to OLED display +void oled_render(void); + +// Moves cursor to character position indicated by column and line, wraps if out of bounds +// Max column denoted by 'oled_max_chars()' and max lines by 'oled_max_lines()' functions +void oled_set_cursor(uint8_t col, uint8_t line); + +// Advances the cursor to the next page, writing ' ' if true +// Wraps to the begining when out of bounds +void oled_advance_page(bool clearPageRemainder); + +// Moves the cursor forward 1 character length +// Advance page if there is not enough room for the next character +// Wraps to the begining when out of bounds +void oled_advance_char(void); + +// Writes a single character to the buffer at current cursor position +// Advances the cursor while writing, inverts the pixels if true +// Main handler that writes character data to the display buffer +void oled_write_char(const char data, bool invert); + +// Writes a string to the buffer at current cursor position +// Advances the cursor while writing, inverts the pixels if true +void oled_write(const char *data, bool invert); + +// Writes a string to the buffer at current cursor position +// Advances the cursor while writing, inverts the pixels if true +// Advances the cursor to the next page, wiring ' ' to the remainder of the current page +void oled_write_ln(const char *data, bool invert); + +// Writes a PROGMEM string to the buffer at current cursor position +// Advances the cursor while writing, inverts the pixels if true +// Remapped to call 'void oled_write(const char *data, bool invert);' on ARM +void oled_write_P(const char *data, bool invert); + +// Writes a PROGMEM string to the buffer at current cursor position +// Advances the cursor while writing, inverts the pixels if true +// Advances the cursor to the next page, wiring ' ' to the remainder of the current page +// Remapped to call 'void oled_write_ln(const char *data, bool invert);' on ARM +void oled_write_ln_P(const char *data, bool invert); + +// Can be used to manually turn on the screen if it is off +// Returns true if the screen was on or turns on +bool oled_on(void); + +// Can be used to manually turn off the screen if it is on +// Returns true if the screen was off or turns off +bool oled_off(void); + +// Basically it's oled_render, but with timeout management and oled_task_user calling! +void oled_task(void); + +// Called at the start of oled_task, weak function overridable by the user +void oled_task_user(void); + +// Scrolls the entire display right +// Returns true if the screen was scrolling or starts scrolling +// NOTE: display contents cannot be changed while scrolling +bool oled_scroll_right(void); + +// Scrolls the entire display left +// Returns true if the screen was scrolling or starts scrolling +// NOTE: display contents cannot be changed while scrolling +bool oled_scroll_left(void); + +// Turns off display scrolling +// Returns true if the screen was not scrolling or stops scrolling +bool oled_scroll_off(void); + +// Returns the maximum number of characters that will fit on a line +uint8_t oled_max_chars(void); + +// Returns the maximum number of lines that will fit on the oled +uint8_t oled_max_lines(void); +``` + +## SSD1306.h driver conversion guide + +|Old API |Recommended New API | +|---------------------------|-----------------------------------| +|`struct CharacterMatrix` |*removed - delete all references* | +|`iota_gfx_init` |`oled_init` | +|`iota_gfx_on` |`oled_on` | +|`iota_gfx_off` |`oled_off` | +|`iota_gfx_flush` |`oled_render` | +|`iota_gfx_write_char` |`oled_write_char` | +|`iota_gfx_write` |`oled_write` | +|`iota_gfx_write_P` |`oled_write_P` | +|`iota_gfx_clear_screen` |`oled_clear` | +|`matrix_clear` |*removed - delete all references* | +|`matrix_write_char_inner` |`oled_write_char` | +|`matrix_write_char` |`oled_write_char` | +|`matrix_write` |`oled_write` | +|`matrix_write_ln` |`oled_write_ln` | +|`matrix_write_P` |`oled_write_P` | +|`matrix_write_ln_P` |`oled_write_ln_P` | +|`matrix_render` |`oled_render` | +|`iota_gfx_task` |`oled_task` | +|`iota_gfx_task_user` |`oled_task_user` | diff --git a/docs/hardware_drivers.md b/docs/hardware_drivers.md index 4c1266f2241..023e92982cb 100644 --- a/docs/hardware_drivers.md +++ b/docs/hardware_drivers.md @@ -14,9 +14,9 @@ QMK is used on a lot of different hardware. While support for the most common MC Support for addressing pins on the ProMicro by their Arduino name rather than their AVR name. This needs to be better documented, if you are trying to do this and reading the code doesn't help please [open an issue](https://github.com/qmk/qmk_firmware/issues/new) and we can help you through the process. -## SSD1306 (AVR Only) +## SSD1306 OLED Driver -Support for SSD1306 based OLED displays. This needs to be better documented, if you are trying to do this and reading the code doesn't help please [open an issue](https://github.com/qmk/qmk_firmware/issues/new) and we can help you through the process. +Support for SSD1306 based OLED displays. For more information see the [OLED Driver Feature](feature_oled_driver.md) page. ## uGFX @@ -32,4 +32,4 @@ Support for up to 2 drivers. Each driver impliments 2 charlieplex matrices to in ## IS31FL3733 -Support for up to a single driver with room for expansion. Each driver can control 192 individual LEDs or 64 RGB LEDs. For more information on how to setup the driver see the [RGB Matrix](feature_rgb_matrix.md) page. \ No newline at end of file +Support for up to a single driver with room for expansion. Each driver can control 192 individual LEDs or 64 RGB LEDs. For more information on how to setup the driver see the [RGB Matrix](feature_rgb_matrix.md) page. diff --git a/drivers/arm/i2c_master.c b/drivers/arm/i2c_master.c index 0e5edcc380a..7369398cc4b 100644 --- a/drivers/arm/i2c_master.c +++ b/drivers/arm/i2c_master.c @@ -42,6 +42,18 @@ static const I2CConfig i2cconfig = { 0 }; +static i2c_status_t chibios_to_qmk(const msg_t* status) { + switch (*status) { + case I2C_NO_ERROR: + return I2C_STATUS_SUCCESS; + case I2C_TIMEOUT: + return I2C_STATUS_TIMEOUT; + // I2C_BUS_ERROR, I2C_ARBITRATION_LOST, I2C_ACK_FAILURE, I2C_OVERRUN, I2C_PEC_ERROR, I2C_SMB_ALERT + default: + return I2C_STATUS_ERROR; + } +} + __attribute__ ((weak)) void i2c_init(void) { @@ -57,29 +69,30 @@ void i2c_init(void) //i2cInit(); //This is invoked by halInit() so no need to redo it. } -// This is usually not needed -uint8_t i2c_start(uint8_t address) +i2c_status_t i2c_start(uint8_t address) { i2c_address = address; i2cStart(&I2C_DRIVER, &i2cconfig); - return 0; + return I2C_STATUS_SUCCESS; } -uint8_t i2c_transmit(uint8_t address, uint8_t* data, uint16_t length, uint16_t timeout) +i2c_status_t i2c_transmit(uint8_t address, const uint8_t* data, uint16_t length, uint16_t timeout) { i2c_address = address; i2cStart(&I2C_DRIVER, &i2cconfig); - return i2cMasterTransmitTimeout(&I2C_DRIVER, (i2c_address >> 1), data, length, 0, 0, MS2ST(timeout)); + msg_t status = i2cMasterTransmitTimeout(&I2C_DRIVER, (i2c_address >> 1), data, length, 0, 0, MS2ST(timeout)); + return chibios_to_qmk(&status); } -uint8_t i2c_receive(uint8_t address, uint8_t* data, uint16_t length, uint16_t timeout) +i2c_status_t i2c_receive(uint8_t address, uint8_t* data, uint16_t length, uint16_t timeout) { i2c_address = address; i2cStart(&I2C_DRIVER, &i2cconfig); - return i2cMasterReceiveTimeout(&I2C_DRIVER, (i2c_address >> 1), data, length, MS2ST(timeout)); + msg_t status = i2cMasterReceiveTimeout(&I2C_DRIVER, (i2c_address >> 1), data, length, MS2ST(timeout)); + return chibios_to_qmk(&status); } -uint8_t i2c_writeReg(uint8_t devaddr, uint8_t regaddr, uint8_t* data, uint16_t length, uint16_t timeout) +i2c_status_t i2c_writeReg(uint8_t devaddr, uint8_t regaddr, const uint8_t* data, uint16_t length, uint16_t timeout) { i2c_address = devaddr; i2cStart(&I2C_DRIVER, &i2cconfig); @@ -91,18 +104,19 @@ uint8_t i2c_writeReg(uint8_t devaddr, uint8_t regaddr, uint8_t* data, uint16_t l } complete_packet[0] = regaddr; - return i2cMasterTransmitTimeout(&I2C_DRIVER, (i2c_address >> 1), complete_packet, length + 1, 0, 0, MS2ST(timeout)); + msg_t status = i2cMasterTransmitTimeout(&I2C_DRIVER, (i2c_address >> 1), complete_packet, length + 1, 0, 0, MS2ST(timeout)); + return chibios_to_qmk(&status); } -uint8_t i2c_readReg(uint8_t devaddr, uint8_t* regaddr, uint8_t* data, uint16_t length, uint16_t timeout) +i2c_status_t i2c_readReg(uint8_t devaddr, uint8_t* regaddr, uint8_t* data, uint16_t length, uint16_t timeout) { i2c_address = devaddr; i2cStart(&I2C_DRIVER, &i2cconfig); - return i2cMasterTransmitTimeout(&I2C_DRIVER, (i2c_address >> 1), regaddr, 1, data, length, MS2ST(timeout)); + msg_t status = i2cMasterTransmitTimeout(&I2C_DRIVER, (i2c_address >> 1), regaddr, 1, data, length, MS2ST(timeout)); + return chibios_to_qmk(&status); } -uint8_t i2c_stop(void) +void i2c_stop(void) { i2cStop(&I2C_DRIVER); - return 0; } diff --git a/drivers/arm/i2c_master.h b/drivers/arm/i2c_master.h index 4ab2301f8cf..a15f1702dd3 100644 --- a/drivers/arm/i2c_master.h +++ b/drivers/arm/i2c_master.h @@ -40,11 +40,17 @@ #define I2C_DRIVER I2CD1 #endif +typedef int16_t i2c_status_t; + +#define I2C_STATUS_SUCCESS (0) +#define I2C_STATUS_ERROR (-1) +#define I2C_STATUS_TIMEOUT (-2) + void i2c_init(void); -uint8_t i2c_start(uint8_t address); -uint8_t i2c_transmit(uint8_t address, uint8_t* data, uint16_t length, uint16_t timeout); -uint8_t i2c_receive(uint8_t address, uint8_t* data, uint16_t length, uint16_t timeout); -uint8_t i2c_transmit_receive(uint8_t address, uint8_t * tx_body, uint16_t tx_length, uint8_t * rx_body, uint16_t rx_length); -uint8_t i2c_writeReg(uint8_t devaddr, uint8_t regaddr, uint8_t* data, uint16_t length, uint16_t timeout); -uint8_t i2c_readReg(uint8_t devaddr, uint8_t* regaddr, uint8_t* data, uint16_t length, uint16_t timeout); -uint8_t i2c_stop(void); +i2c_status_t i2c_start(uint8_t address); +i2c_status_t i2c_transmit(uint8_t address, const uint8_t* data, uint16_t length, uint16_t timeout); +i2c_status_t i2c_receive(uint8_t address, uint8_t* data, uint16_t length, uint16_t timeout); +i2c_status_t i2c_transmit_receive(uint8_t address, uint8_t * tx_body, uint16_t tx_length, uint8_t * rx_body, uint16_t rx_length); +i2c_status_t i2c_writeReg(uint8_t devaddr, uint8_t regaddr, const uint8_t* data, uint16_t length, uint16_t timeout); +i2c_status_t i2c_readReg(uint8_t devaddr, uint8_t* regaddr, uint8_t* data, uint16_t length, uint16_t timeout); +void i2c_stop(void); diff --git a/drivers/avr/i2c_master.c b/drivers/avr/i2c_master.c index ba6d0d1586e..a7364bae08f 100755 --- a/drivers/avr/i2c_master.c +++ b/drivers/avr/i2c_master.c @@ -121,7 +121,7 @@ int16_t i2c_read_nack(uint16_t timeout) { return TWDR; } -i2c_status_t i2c_transmit(uint8_t address, uint8_t* data, uint16_t length, uint16_t timeout) { +i2c_status_t i2c_transmit(uint8_t address, const uint8_t* data, uint16_t length, uint16_t timeout) { i2c_status_t status = i2c_start(address | I2C_WRITE, timeout); for (uint16_t i = 0; i < length && status >= 0; i++) { @@ -155,7 +155,7 @@ i2c_status_t i2c_receive(uint8_t address, uint8_t* data, uint16_t length, uint16 return (status < 0) ? status : I2C_STATUS_SUCCESS; } -i2c_status_t i2c_writeReg(uint8_t devaddr, uint8_t regaddr, uint8_t* data, uint16_t length, uint16_t timeout) { +i2c_status_t i2c_writeReg(uint8_t devaddr, uint8_t regaddr, const uint8_t* data, uint16_t length, uint16_t timeout) { i2c_status_t status = i2c_start(devaddr | 0x00, timeout); if (status >= 0) { status = i2c_write(regaddr, timeout); diff --git a/drivers/avr/i2c_master.h b/drivers/avr/i2c_master.h index 81a7fb5e322..b4613115d9a 100755 --- a/drivers/avr/i2c_master.h +++ b/drivers/avr/i2c_master.h @@ -22,10 +22,10 @@ i2c_status_t i2c_start(uint8_t address, uint16_t timeout); i2c_status_t i2c_write(uint8_t data, uint16_t timeout); int16_t i2c_read_ack(uint16_t timeout); int16_t i2c_read_nack(uint16_t timeout); -i2c_status_t i2c_transmit(uint8_t address, uint8_t* data, uint16_t length, uint16_t timeout); +i2c_status_t i2c_transmit(uint8_t address, const uint8_t* data, uint16_t length, uint16_t timeout); i2c_status_t i2c_receive(uint8_t address, uint8_t* data, uint16_t length, uint16_t timeout); -i2c_status_t i2c_writeReg(uint8_t devaddr, uint8_t regaddr, uint8_t* data, uint16_t length, uint16_t timeout); +i2c_status_t i2c_writeReg(uint8_t devaddr, uint8_t regaddr, const uint8_t* data, uint16_t length, uint16_t timeout); i2c_status_t i2c_readReg(uint8_t devaddr, uint8_t regaddr, uint8_t* data, uint16_t length, uint16_t timeout); void i2c_stop(void); -#endif // I2C_MASTER_H \ No newline at end of file +#endif // I2C_MASTER_H diff --git a/drivers/oled/glcdfont.c b/drivers/oled/glcdfont.c new file mode 100644 index 00000000000..150be9e9441 --- /dev/null +++ b/drivers/oled/glcdfont.c @@ -0,0 +1,240 @@ +#pragma once + +#ifdef __AVR__ + #include + #include +#elif defined(ESP8266) + #include +#else + #define PROGMEM +#endif + +// Helidox 8x6 font with QMK Firmware Logo +// Online editor: http://teripom.x0.com/ + +static const unsigned char font[] PROGMEM = { + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x3E, 0x5B, 0x4F, 0x5B, 0x3E, 0x00, + 0x3E, 0x6B, 0x4F, 0x6B, 0x3E, 0x00, + 0x1C, 0x3E, 0x7C, 0x3E, 0x1C, 0x00, + 0x18, 0x3C, 0x7E, 0x3C, 0x18, 0x00, + 0x1C, 0x57, 0x7D, 0x57, 0x1C, 0x00, + 0x1C, 0x5E, 0x7F, 0x5E, 0x1C, 0x00, + 0x00, 0x18, 0x3C, 0x18, 0x00, 0x00, + 0xFF, 0xE7, 0xC3, 0xE7, 0xFF, 0x00, + 0x00, 0x18, 0x24, 0x18, 0x00, 0x00, + 0xFF, 0xE7, 0xDB, 0xE7, 0xFF, 0x00, + 0x30, 0x48, 0x3A, 0x06, 0x0E, 0x00, + 0x26, 0x29, 0x79, 0x29, 0x26, 0x00, + 0x40, 0x7F, 0x05, 0x05, 0x07, 0x00, + 0x40, 0x7F, 0x05, 0x25, 0x3F, 0x00, + 0x5A, 0x3C, 0xE7, 0x3C, 0x5A, 0x00, + 0x7F, 0x3E, 0x1C, 0x1C, 0x08, 0x00, + 0x08, 0x1C, 0x1C, 0x3E, 0x7F, 0x00, + 0x14, 0x22, 0x7F, 0x22, 0x14, 0x00, + 0x5F, 0x5F, 0x00, 0x5F, 0x5F, 0x00, + 0x06, 0x09, 0x7F, 0x01, 0x7F, 0x00, + 0x00, 0x66, 0x89, 0x95, 0x6A, 0x00, + 0x60, 0x60, 0x60, 0x60, 0x60, 0x00, + 0x94, 0xA2, 0xFF, 0xA2, 0x94, 0x00, + 0x08, 0x04, 0x7E, 0x04, 0x08, 0x00, + 0x10, 0x20, 0x7E, 0x20, 0x10, 0x00, + 0x08, 0x08, 0x2A, 0x1C, 0x08, 0x00, + 0x08, 0x1C, 0x2A, 0x08, 0x08, 0x00, + 0x1E, 0x10, 0x10, 0x10, 0x10, 0x00, + 0x0C, 0x1E, 0x0C, 0x1E, 0x0C, 0x00, + 0x30, 0x38, 0x3E, 0x38, 0x30, 0x00, + 0x06, 0x0E, 0x3E, 0x0E, 0x06, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x5F, 0x00, 0x00, 0x00, + 0x00, 0x07, 0x00, 0x07, 0x00, 0x00, + 0x14, 0x7F, 0x14, 0x7F, 0x14, 0x00, + 0x24, 0x2A, 0x7F, 0x2A, 0x12, 0x00, + 0x23, 0x13, 0x08, 0x64, 0x62, 0x00, + 0x36, 0x49, 0x56, 0x20, 0x50, 0x00, + 0x00, 0x08, 0x07, 0x03, 0x00, 0x00, + 0x00, 0x1C, 0x22, 0x41, 0x00, 0x00, + 0x00, 0x41, 0x22, 0x1C, 0x00, 0x00, + 0x2A, 0x1C, 0x7F, 0x1C, 0x2A, 0x00, + 0x08, 0x08, 0x3E, 0x08, 0x08, 0x00, + 0x00, 0x80, 0x70, 0x30, 0x00, 0x00, + 0x08, 0x08, 0x08, 0x08, 0x08, 0x00, + 0x00, 0x00, 0x60, 0x60, 0x00, 0x00, + 0x20, 0x10, 0x08, 0x04, 0x02, 0x00, + 0x3E, 0x51, 0x49, 0x45, 0x3E, 0x00, + 0x00, 0x42, 0x7F, 0x40, 0x00, 0x00, + 0x72, 0x49, 0x49, 0x49, 0x46, 0x00, + 0x21, 0x41, 0x49, 0x4D, 0x33, 0x00, + 0x18, 0x14, 0x12, 0x7F, 0x10, 0x00, + 0x27, 0x45, 0x45, 0x45, 0x39, 0x00, + 0x3C, 0x4A, 0x49, 0x49, 0x31, 0x00, + 0x41, 0x21, 0x11, 0x09, 0x07, 0x00, + 0x36, 0x49, 0x49, 0x49, 0x36, 0x00, + 0x46, 0x49, 0x49, 0x29, 0x1E, 0x00, + 0x00, 0x00, 0x14, 0x00, 0x00, 0x00, + 0x00, 0x40, 0x34, 0x00, 0x00, 0x00, + 0x00, 0x08, 0x14, 0x22, 0x41, 0x00, + 0x14, 0x14, 0x14, 0x14, 0x14, 0x00, + 0x00, 0x41, 0x22, 0x14, 0x08, 0x00, + 0x02, 0x01, 0x59, 0x09, 0x06, 0x00, + 0x3E, 0x41, 0x5D, 0x59, 0x4E, 0x00, + 0x7C, 0x12, 0x11, 0x12, 0x7C, 0x00, + 0x7F, 0x49, 0x49, 0x49, 0x36, 0x00, + 0x3E, 0x41, 0x41, 0x41, 0x22, 0x00, + 0x7F, 0x41, 0x41, 0x41, 0x3E, 0x00, + 0x7F, 0x49, 0x49, 0x49, 0x41, 0x00, + 0x7F, 0x09, 0x09, 0x09, 0x01, 0x00, + 0x3E, 0x41, 0x41, 0x51, 0x73, 0x00, + 0x7F, 0x08, 0x08, 0x08, 0x7F, 0x00, + 0x00, 0x41, 0x7F, 0x41, 0x00, 0x00, + 0x20, 0x40, 0x41, 0x3F, 0x01, 0x00, + 0x7F, 0x08, 0x14, 0x22, 0x41, 0x00, + 0x7F, 0x40, 0x40, 0x40, 0x40, 0x00, + 0x7F, 0x02, 0x1C, 0x02, 0x7F, 0x00, + 0x7F, 0x04, 0x08, 0x10, 0x7F, 0x00, + 0x3E, 0x41, 0x41, 0x41, 0x3E, 0x00, + 0x7F, 0x09, 0x09, 0x09, 0x06, 0x00, + 0x3E, 0x41, 0x51, 0x21, 0x5E, 0x00, + 0x7F, 0x09, 0x19, 0x29, 0x46, 0x00, + 0x26, 0x49, 0x49, 0x49, 0x32, 0x00, + 0x03, 0x01, 0x7F, 0x01, 0x03, 0x00, + 0x3F, 0x40, 0x40, 0x40, 0x3F, 0x00, + 0x1F, 0x20, 0x40, 0x20, 0x1F, 0x00, + 0x3F, 0x40, 0x38, 0x40, 0x3F, 0x00, + 0x63, 0x14, 0x08, 0x14, 0x63, 0x00, + 0x03, 0x04, 0x78, 0x04, 0x03, 0x00, + 0x61, 0x59, 0x49, 0x4D, 0x43, 0x00, + 0x00, 0x7F, 0x41, 0x41, 0x41, 0x00, + 0x02, 0x04, 0x08, 0x10, 0x20, 0x00, + 0x00, 0x41, 0x41, 0x41, 0x7F, 0x00, + 0x04, 0x02, 0x01, 0x02, 0x04, 0x00, + 0x40, 0x40, 0x40, 0x40, 0x40, 0x00, + 0x00, 0x03, 0x07, 0x08, 0x00, 0x00, + 0x20, 0x54, 0x54, 0x78, 0x40, 0x00, + 0x7F, 0x28, 0x44, 0x44, 0x38, 0x00, + 0x38, 0x44, 0x44, 0x44, 0x28, 0x00, + 0x38, 0x44, 0x44, 0x28, 0x7F, 0x00, + 0x38, 0x54, 0x54, 0x54, 0x18, 0x00, + 0x00, 0x08, 0x7E, 0x09, 0x02, 0x00, + 0x18, 0xA4, 0xA4, 0x9C, 0x78, 0x00, + 0x7F, 0x08, 0x04, 0x04, 0x78, 0x00, + 0x00, 0x44, 0x7D, 0x40, 0x00, 0x00, + 0x20, 0x40, 0x40, 0x3D, 0x00, 0x00, + 0x7F, 0x10, 0x28, 0x44, 0x00, 0x00, + 0x00, 0x41, 0x7F, 0x40, 0x00, 0x00, + 0x7C, 0x04, 0x78, 0x04, 0x78, 0x00, + 0x7C, 0x08, 0x04, 0x04, 0x78, 0x00, + 0x38, 0x44, 0x44, 0x44, 0x38, 0x00, + 0xFC, 0x18, 0x24, 0x24, 0x18, 0x00, + 0x18, 0x24, 0x24, 0x18, 0xFC, 0x00, + 0x7C, 0x08, 0x04, 0x04, 0x08, 0x00, + 0x48, 0x54, 0x54, 0x54, 0x24, 0x00, + 0x04, 0x04, 0x3F, 0x44, 0x24, 0x00, + 0x3C, 0x40, 0x40, 0x20, 0x7C, 0x00, + 0x1C, 0x20, 0x40, 0x20, 0x1C, 0x00, + 0x3C, 0x40, 0x30, 0x40, 0x3C, 0x00, + 0x44, 0x28, 0x10, 0x28, 0x44, 0x00, + 0x4C, 0x90, 0x90, 0x90, 0x7C, 0x00, + 0x44, 0x64, 0x54, 0x4C, 0x44, 0x00, + 0x00, 0x08, 0x36, 0x41, 0x00, 0x00, + 0x00, 0x00, 0x77, 0x00, 0x00, 0x00, + 0x00, 0x41, 0x36, 0x08, 0x00, 0x00, + 0x02, 0x01, 0x02, 0x04, 0x02, 0x00, + 0x3C, 0x26, 0x23, 0x26, 0x3C, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x40, 0x40, 0x40, 0xF0, 0xF8, 0xF8, + 0xFF, 0x38, 0xFF, 0xF8, 0xF8, 0x3F, + 0xF8, 0xF8, 0xFF, 0x38, 0xFF, 0xF8, + 0xF8, 0xF0, 0x40, 0x40, 0x40, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, + 0xC0, 0xC0, 0xC0, 0x80, 0x00, 0x00, + 0xC0, 0xC0, 0x80, 0x00, 0x00, 0x00, + 0x80, 0xC0, 0xC0, 0x00, 0xC0, 0xC0, + 0x00, 0x00, 0x80, 0xC0, 0xC0, 0x00, + 0x00, 0x00, 0x00, 0x00, 0xC0, 0xC0, + 0xC0, 0xC0, 0xC0, 0x00, 0xC0, 0xC0, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0xE0, 0xF0, 0xF0, 0xF0, 0xE0, 0xEC, + 0xEE, 0xF7, 0xF3, 0x70, 0x20, 0x00, + 0x7C, 0x7C, 0x7C, 0x7E, 0x00, 0x7E, + 0x7E, 0x7E, 0x7F, 0x7F, 0x7F, 0x00, + 0x00, 0x80, 0xC0, 0xE0, 0x7E, 0x5B, + 0x4F, 0x5B, 0xFE, 0xC0, 0x00, 0x00, + 0xC0, 0x00, 0xDC, 0xD7, 0xDE, 0xDE, + 0xDE, 0xD7, 0xDC, 0x00, 0xC0, 0x00, + 0x00, 0x00, 0x00, 0xE0, 0xEC, 0xDF, + 0xFC, 0xE0, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x49, 0x49, 0x49, 0xFF, 0xFF, 0xFF, + 0xFF, 0xE0, 0xDF, 0xBF, 0xBF, 0x00, + 0xBF, 0xBF, 0xDF, 0xE0, 0xFF, 0xFF, + 0xFF, 0xFF, 0x49, 0x49, 0x49, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x1F, 0x3F, + 0x60, 0x60, 0xE0, 0xBF, 0x1F, 0x00, + 0x7F, 0x7F, 0x07, 0x1E, 0x38, 0x1E, + 0x07, 0x7F, 0x7F, 0x00, 0x7F, 0x7F, + 0x0E, 0x1F, 0x3B, 0x71, 0x60, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x7F, 0x7F, + 0x0C, 0x0C, 0x0C, 0x00, 0x7E, 0x7E, + 0x00, 0x7F, 0x7E, 0x03, 0x03, 0x00, + 0x7F, 0x7E, 0x03, 0x03, 0x7E, 0x7E, + 0x03, 0x03, 0x7F, 0x7E, 0x00, 0x0F, + 0x3E, 0x70, 0x3C, 0x06, 0x3C, 0x70, + 0x3E, 0x0F, 0x00, 0x32, 0x7B, 0x49, + 0x49, 0x3F, 0x7E, 0x00, 0x7F, 0x7E, + 0x03, 0x03, 0x00, 0x1E, 0x3F, 0x69, + 0x69, 0x6F, 0x26, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x0F, 0x1F, 0x3F, 0x7F, 0x7F, 0x7F, + 0x7F, 0x7F, 0x3F, 0x1E, 0x0C, 0x00, + 0x1F, 0x1F, 0x1F, 0x3F, 0x00, 0x3F, + 0x3F, 0x3F, 0x7F, 0x7F, 0x7F, 0x00, + 0x30, 0x7B, 0x7F, 0x78, 0x30, 0x20, + 0x20, 0x30, 0x78, 0x7F, 0x3B, 0x00, + 0x03, 0x00, 0x0F, 0x7F, 0x0F, 0x0F, + 0x0F, 0x7F, 0x0F, 0x00, 0x03, 0x00, + 0x40, 0x7C, 0x3F, 0x3F, 0x23, 0x01, + 0x23, 0x3F, 0x37, 0x6C, 0x40, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x01, 0x01, 0x01, 0x07, 0x0F, 0x0F, + 0x7F, 0x0F, 0x7F, 0x0F, 0x0F, 0x7E, + 0x0F, 0x0F, 0x7F, 0x0F, 0x7F, 0x0F, + 0x0F, 0x07, 0x01, 0x01, 0x01, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x01, 0x01, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +}; diff --git a/drivers/oled/oled_driver.c b/drivers/oled/oled_driver.c new file mode 100644 index 00000000000..aa025d7a4cc --- /dev/null +++ b/drivers/oled/oled_driver.c @@ -0,0 +1,528 @@ +/* +Copyright 2019 Ryan Caltabiano + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ +#include "i2c_master.h" +#include "oled_driver.h" +#include OLED_FONT_H +#include "timer.h" +#include "print.h" + +#include + +#if defined(__AVR__) + #include + #include +#elif defined(ESP8266) + #include +#else // defined(ESP8266) + #define PROGMEM + #define memcpy_P(des, src, len) memcpy(des, src, len) +#endif // defined(__AVR__) + +// Used commands from spec sheet: https://cdn-shop.adafruit.com/datasheets/SSD1306.pdf +// Fundamental Commands +#define CONTRAST 0x81 +#define DISPLAY_ALL_ON 0xA5 +#define DISPLAY_ALL_ON_RESUME 0xA4 +#define NORMAL_DISPLAY 0xA6 +#define DISPLAY_ON 0xAF +#define DISPLAY_OFF 0xAE + +// Scrolling Commands +#define ACTIVATE_SCROLL 0x2F +#define DEACTIVATE_SCROLL 0x2E +#define SCROLL_RIGHT 0x26 +#define SCROLL_LEFT 0x27 +#define SCROLL_RIGHT_UP 0x29 +#define SCROLL_LEFT_UP 0x2A + +// Addressing Setting Commands +#define MEMORY_MODE 0x20 +#define COLUMN_ADDR 0x21 +#define PAGE_ADDR 0x22 + +// Hardware Configuration Commands +#define DISPLAY_START_LINE 0x40 +#define SEGMENT_REMAP 0xA0 +#define SEGMENT_REMAP_INV 0xA1 +#define MULTIPLEX_RATIO 0xA8 +#define COM_SCAN_INC 0xC0 +#define COM_SCAN_DEC 0xC8 +#define DISPLAY_OFFSET 0xD3 +#define COM_PINS 0xDA + +// Timing & Driving Commands +#define DISPLAY_CLOCK 0xD5 +#define PRE_CHARGE_PERIOD 0xD9 +#define VCOM_DETECT 0xDB + +// Charge Pump Commands +#define CHARGE_PUMP 0x8D + +// Misc defines +#define OLED_TIMEOUT 60000 +#define OLED_BLOCK_COUNT (sizeof(OLED_BLOCK_TYPE) * 8) +#define OLED_BLOCK_SIZE (OLED_MATRIX_SIZE / OLED_BLOCK_COUNT) + +// i2c defines +#define I2C_CMD 0x00 +#define I2C_DATA 0x40 +#if defined(__AVR__) + // already defined on ARM + #define I2C_TIMEOUT 100 + #define I2C_TRANSMIT_P(data) i2c_transmit_P((OLED_DISPLAY_ADDRESS << 1), &data[0], sizeof(data), I2C_TIMEOUT) +#else // defined(__AVR__) + #define I2C_TRANSMIT_P(data) i2c_transmit((OLED_DISPLAY_ADDRESS << 1), &data[0], sizeof(data), I2C_TIMEOUT) +#endif // defined(__AVR__) +#define I2C_TRANSMIT(data) i2c_transmit((OLED_DISPLAY_ADDRESS << 1), &data[0], sizeof(data), I2C_TIMEOUT) +#define I2C_WRITE_REG(mode, data, size) i2c_writeReg((OLED_DISPLAY_ADDRESS << 1), mode, data, size, I2C_TIMEOUT) + +#define HAS_FLAGS(bits, flags) ((bits & flags) == flags) + +// Display buffer's is the same as the OLED memory layout +// this is so we don't end up with rounding errors with +// parts of the display unusable or don't get cleared correctly +// and also allows for drawing & inverting +uint8_t oled_buffer[OLED_MATRIX_SIZE]; +uint8_t* oled_cursor; +OLED_BLOCK_TYPE oled_dirty = 0; +bool oled_initialized = false; +bool oled_active = false; +bool oled_scrolling = false; +uint8_t oled_rotation = 0; +uint8_t oled_rotation_width = 0; +#if !defined(OLED_DISABLE_TIMEOUT) + uint16_t oled_last_activity; +#endif + +// Internal variables to reduce math instructions + +#if defined(__AVR__) +// identical to i2c_transmit, but for PROGMEM since all initialization is in PROGMEM arrays currently +// probably should move this into i2c_master... +static i2c_status_t i2c_transmit_P(uint8_t address, const uint8_t* data, uint16_t length, uint16_t timeout) { + i2c_status_t status = i2c_start(address | I2C_WRITE, timeout); + + for (uint16_t i = 0; i < length && status >= 0; i++) { + status = i2c_write(pgm_read_byte((const char*)data++), timeout); + if (status) break; + } + + i2c_stop(); + + return status; +} +#endif + +// Flips the rendering bits for a character at the current cursor position +static void InvertCharacter(uint8_t *cursor) +{ + const uint8_t *end = cursor + OLED_FONT_WIDTH; + while (cursor < end) { + *cursor = ~(*cursor); + cursor++; + } +} + +bool oled_init(uint8_t rotation) { + oled_rotation = oled_init_user(rotation); + if (!HAS_FLAGS(oled_rotation, OLED_ROTATION_90)) { + oled_rotation_width = OLED_DISPLAY_WIDTH; + } else { + oled_rotation_width = OLED_DISPLAY_HEIGHT; + } + i2c_init(); + + static const uint8_t PROGMEM display_setup1[] = { + I2C_CMD, + DISPLAY_OFF, + DISPLAY_CLOCK, 0x80, + MULTIPLEX_RATIO, OLED_DISPLAY_HEIGHT - 1, + DISPLAY_OFFSET, 0x00, + DISPLAY_START_LINE | 0x00, + CHARGE_PUMP, 0x14, + MEMORY_MODE, 0x00, }; // Horizontal addressing mode + if (I2C_TRANSMIT_P(display_setup1) != I2C_STATUS_SUCCESS) { + print("oled_init cmd set 1 failed\n"); + return false; + } + + if (!HAS_FLAGS(oled_rotation, OLED_ROTATION_180)) { + static const uint8_t PROGMEM display_normal[] = { + I2C_CMD, + SEGMENT_REMAP_INV, + COM_SCAN_DEC }; + if (I2C_TRANSMIT_P(display_normal) != I2C_STATUS_SUCCESS) { + print("oled_init cmd normal rotation failed\n"); + return false; + } + } else { + static const uint8_t PROGMEM display_flipped[] = { + I2C_CMD, + SEGMENT_REMAP, + COM_SCAN_INC }; + if (I2C_TRANSMIT_P(display_flipped) != I2C_STATUS_SUCCESS) { + print("display_flipped failed\n"); + return false; + } + } + + static const uint8_t PROGMEM display_setup2[] = { + I2C_CMD, + COM_PINS, 0x02, + CONTRAST, 0x8F, + PRE_CHARGE_PERIOD, 0xF1, + VCOM_DETECT, 0x40, + DISPLAY_ALL_ON_RESUME, + NORMAL_DISPLAY, + DEACTIVATE_SCROLL, + DISPLAY_ON }; + if (I2C_TRANSMIT_P(display_setup2) != I2C_STATUS_SUCCESS) { + print("display_setup2 failed\n"); + return false; + } + + oled_clear(); + oled_initialized = true; + oled_active = true; + oled_scrolling = false; + return true; +} + +__attribute__((weak)) +uint8_t oled_init_user(uint8_t rotation) { + return rotation; +} + +void oled_clear(void) { + memset(oled_buffer, 0, sizeof(oled_buffer)); + oled_cursor = &oled_buffer[0]; + oled_dirty = -1; // -1 will be max value as long as display_dirty is unsigned type +} + +static void calc_bounds(uint8_t update_start, uint8_t* cmd_array) +{ + cmd_array[1] = OLED_BLOCK_SIZE * update_start % OLED_DISPLAY_WIDTH; + cmd_array[4] = OLED_BLOCK_SIZE * update_start / OLED_DISPLAY_WIDTH; + cmd_array[2] = (OLED_BLOCK_SIZE + OLED_DISPLAY_WIDTH - 1) % OLED_DISPLAY_WIDTH + cmd_array[1]; + cmd_array[5] = (OLED_BLOCK_SIZE + OLED_DISPLAY_WIDTH - 1) / OLED_DISPLAY_WIDTH - 1; +} + +static void calc_bounds_90(uint8_t update_start, uint8_t* cmd_array) +{ + cmd_array[1] = OLED_BLOCK_SIZE * update_start / OLED_DISPLAY_HEIGHT * 8; + cmd_array[4] = OLED_BLOCK_SIZE * update_start % OLED_DISPLAY_HEIGHT; + cmd_array[2] = (OLED_BLOCK_SIZE + OLED_DISPLAY_HEIGHT - 1) / OLED_DISPLAY_HEIGHT * 8 - 1 + cmd_array[1];; + cmd_array[5] = (OLED_BLOCK_SIZE + OLED_DISPLAY_HEIGHT - 1) % OLED_DISPLAY_HEIGHT / 8; +} + +uint8_t crot(uint8_t a, int8_t n) +{ + const uint8_t mask = 0x7; + n &= mask; + return a << n | a >> (-n & mask); +} + +static void rotate_90(const uint8_t* src, uint8_t* dest) +{ + for (uint8_t i = 0, shift = 7; i < 8; ++i, --shift) { + uint8_t selector = (1 << i); + for (uint8_t j = 0; j < 8; ++j) { + dest[i] |= crot(src[j] & selector, shift - (int8_t)j); + } + } +} + +void oled_render(void) { + // Do we have work to do? + if (!oled_dirty || oled_scrolling) { + return; + } + + // Find first dirty block + uint8_t update_start = 0; + while (!(oled_dirty & (1 << update_start))) { ++update_start; } + + // Set column & page position + static uint8_t display_start[] = { + I2C_CMD, + COLUMN_ADDR, 0, OLED_DISPLAY_WIDTH - 1, + PAGE_ADDR, 0, OLED_DISPLAY_HEIGHT / 8 - 1 }; + if (!HAS_FLAGS(oled_rotation, OLED_ROTATION_90)) { + calc_bounds(update_start, &display_start[1]); // Offset from I2C_CMD byte at the start + } else { + calc_bounds_90(update_start, &display_start[1]); // Offset from I2C_CMD byte at the start + } + + // Send column & page position + if (I2C_TRANSMIT(display_start) != I2C_STATUS_SUCCESS) { + print("oled_render offset command failed\n"); + return; + } + + if (!HAS_FLAGS(oled_rotation, OLED_ROTATION_90)) { + // Send render data chunk as is + if (I2C_WRITE_REG(I2C_DATA, &oled_buffer[OLED_BLOCK_SIZE * update_start], OLED_BLOCK_SIZE) != I2C_STATUS_SUCCESS) { + print("oled_render data failed\n"); + return; + } + } else { + // Rotate the render chunks + const static uint8_t source_map[] = OLED_SOURCE_MAP; + const static uint8_t target_map[] = OLED_TARGET_MAP; + + static uint8_t temp_buffer[OLED_BLOCK_SIZE]; + memset(temp_buffer, 0, sizeof(temp_buffer)); + for(uint8_t i = 0; i < sizeof(source_map); ++i) { + rotate_90(&oled_buffer[OLED_BLOCK_SIZE * update_start + source_map[i]], &temp_buffer[target_map[i]]); + } + + // Send render data chunk after rotating + if (I2C_WRITE_REG(I2C_DATA, &temp_buffer[0], OLED_BLOCK_SIZE) != I2C_STATUS_SUCCESS) { + print("oled_render data failed\n"); + return; + } + } + + // Turn on display if it is off + oled_on(); + + // Clear dirty flag + oled_dirty &= ~(1 << update_start); +} + +void oled_set_cursor(uint8_t col, uint8_t line) { + uint16_t index = line * oled_rotation_width + col * OLED_FONT_WIDTH; + + // Out of bounds? + if (index >= OLED_MATRIX_SIZE) { + index = 0; + } + + oled_cursor = &oled_buffer[index]; +} + +void oled_advance_page(bool clearPageRemainder) { + uint16_t index = oled_cursor - &oled_buffer[0]; + uint8_t remaining = oled_rotation_width - (index % oled_rotation_width); + + if (clearPageRemainder) { + // Remaining Char count + remaining = remaining / OLED_FONT_WIDTH; + + // Write empty character until next line + while (remaining--) + oled_write_char(' ', false); + } else { + // Next page index out of bounds? + if (index + remaining >= OLED_MATRIX_SIZE) { + index = 0; + remaining = 0; + } + + oled_cursor = &oled_buffer[index + remaining]; + } +} + +void oled_advance_char(void) { + uint16_t nextIndex = oled_cursor - &oled_buffer[0] + OLED_FONT_WIDTH; + uint8_t remainingSpace = oled_rotation_width - (nextIndex % oled_rotation_width); + + // Do we have enough space on the current line for the next character + if (remainingSpace < OLED_FONT_WIDTH) { + nextIndex += remainingSpace; + } + + // Did we go out of bounds + if (nextIndex >= OLED_MATRIX_SIZE) { + nextIndex = 0; + } + + // Update cursor position + oled_cursor = &oled_buffer[nextIndex]; +} + +// Main handler that writes character data to the display buffer +void oled_write_char(const char data, bool invert) { + // Advance to the next line if newline + if (data == '\n') { + // Old source wrote ' ' until end of line... + oled_advance_page(true); + return; + } + + // copy the current render buffer to check for dirty after + static uint8_t oled_temp_buffer[OLED_FONT_WIDTH]; + memcpy(&oled_temp_buffer, oled_cursor, OLED_FONT_WIDTH); + + // set the reder buffer data + uint8_t cast_data = (uint8_t)data; // font based on unsigned type for index + if (cast_data < OLED_FONT_START || cast_data > OLED_FONT_END) { + memset(oled_cursor, 0x00, OLED_FONT_WIDTH); + } else { + const uint8_t *glyph = &font[(cast_data - OLED_FONT_START) * OLED_FONT_WIDTH]; + memcpy_P(oled_cursor, glyph, OLED_FONT_WIDTH); + } + + // Invert if needed + if (invert) { + InvertCharacter(oled_cursor); + } + + // Dirty check + if (memcmp(&oled_temp_buffer, oled_cursor, OLED_FONT_WIDTH)) { + oled_dirty |= (1 << ((oled_cursor - &oled_buffer[0]) / OLED_BLOCK_SIZE)); + } + + // Finally move to the next char + oled_advance_char(); +} + +void oled_write(const char *data, bool invert) { + const char *end = data + strlen(data); + while (data < end) { + oled_write_char(*data, invert); + data++; + } +} + +void oled_write_ln(const char *data, bool invert) { + oled_write(data, invert); + oled_advance_page(true); +} + +#if defined(__AVR__) +void oled_write_P(const char *data, bool invert) { + uint8_t c = pgm_read_byte(data); + while (c != 0) { + oled_write_char(c, invert); + c = pgm_read_byte(++data); + } +} + +void oled_write_ln_P(const char *data, bool invert) { + oled_write_P(data, invert); + oled_advance_page(true); +} +#endif // defined(__AVR__) + +bool oled_on(void) { +#if !defined(OLED_DISABLE_TIMEOUT) + oled_last_activity = timer_read(); +#endif + + static const uint8_t PROGMEM display_on[] = { I2C_CMD, DISPLAY_ON }; + if (!oled_active) { + if (I2C_TRANSMIT_P(display_on) != I2C_STATUS_SUCCESS) { + print("oled_on cmd failed\n"); + return oled_active; + } + oled_active = true; + } + return oled_active; +} + +bool oled_off(void) { + static const uint8_t PROGMEM display_off[] = { I2C_CMD, DISPLAY_OFF }; + if (oled_active) { + if (I2C_TRANSMIT_P(display_off) != I2C_STATUS_SUCCESS) { + print("oled_off cmd failed\n"); + return oled_active; + } + oled_active = false; + } + return !oled_active; +} + +bool oled_scroll_right(void) { + // Dont enable scrolling if we need to update the display + // This prevents scrolling of bad data from starting the scroll too early after init + if (!oled_dirty && !oled_scrolling) { + static const uint8_t PROGMEM display_scroll_right[] = { + I2C_CMD, SCROLL_RIGHT, 0x00, 0x00, 0x00, 0x0F, 0x00, 0xFF, ACTIVATE_SCROLL }; + if (I2C_TRANSMIT_P(display_scroll_right) != I2C_STATUS_SUCCESS) { + print("oled_scroll_right cmd failed\n"); + return oled_scrolling; + } + oled_scrolling = true; + } + return oled_scrolling; +} + +bool oled_scroll_left(void) { + // Dont enable scrolling if we need to update the display + // This prevents scrolling of bad data from starting the scroll too early after init + if (!oled_dirty && !oled_scrolling) { + static const uint8_t PROGMEM display_scroll_left[] = { + I2C_CMD, SCROLL_LEFT, 0x00, 0x00, 0x00, 0x0F, 0x00, 0xFF, ACTIVATE_SCROLL }; + if (I2C_TRANSMIT_P(display_scroll_left) != I2C_STATUS_SUCCESS) { + print("oled_scroll_left cmd failed\n"); + return oled_scrolling; + } + oled_scrolling = true; + } + return oled_scrolling; +} + +bool oled_scroll_off(void) { + if (oled_scrolling) { + static const uint8_t PROGMEM display_scroll_off[] = { I2C_CMD, DEACTIVATE_SCROLL }; + if (I2C_TRANSMIT_P(display_scroll_off) != I2C_STATUS_SUCCESS) { + print("oled_scroll_off cmd failed\n"); + return oled_scrolling; + } + oled_scrolling = false; + } + return !oled_scrolling; +} + +uint8_t oled_max_chars(void) { + if (!HAS_FLAGS(oled_rotation, OLED_ROTATION_90)) { + return OLED_DISPLAY_WIDTH / OLED_FONT_WIDTH; + } + return OLED_DISPLAY_HEIGHT / OLED_FONT_WIDTH; +} + +uint8_t oled_max_lines(void) { + if (!HAS_FLAGS(oled_rotation, OLED_ROTATION_90)) { + return OLED_DISPLAY_HEIGHT / OLED_FONT_HEIGHT; + } + return OLED_DISPLAY_WIDTH / OLED_FONT_HEIGHT; +} + +void oled_task(void) { + if (!oled_initialized) { + return; + } + + oled_set_cursor(0, 0); + + oled_task_user(); + + // Smart render system, no need to check for dirty + oled_render(); + + // Display timeout check +#if !defined(OLED_DISABLE_TIMEOUT) + if (oled_active && timer_elapsed(oled_last_activity) > OLED_TIMEOUT) { + oled_off(); + } +#endif +} + +__attribute__((weak)) +void oled_task_user(void) { +} diff --git a/drivers/oled/oled_driver.h b/drivers/oled/oled_driver.h new file mode 100644 index 00000000000..1ca31df114b --- /dev/null +++ b/drivers/oled/oled_driver.h @@ -0,0 +1,183 @@ +/* +Copyright 2019 Ryan Caltabiano + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ +#pragma once + +#include +#include + + +#if defined(OLED_DISPLAY_CUSTOM) + // Expected user to implement the necessary defines +#elif defined(OLED_DISPLAY_128X64) + // Double height 128x64 + #define OLED_DISPLAY_WIDTH 128 + #define OLED_DISPLAY_HEIGHT 64 + #define OLED_MATRIX_SIZE (OLED_DISPLAY_HEIGHT / 8 * OLED_DISPLAY_WIDTH) // 1024 (compile time mathed) + #define OLED_BLOCK_TYPE uint16_t + #define OLED_BLOCK_COUNT (sizeof(OLED_BLOCK_TYPE) * 8) // 16 (compile time mathed) + #define OLED_BLOCK_SIZE (OLED_MATRIX_SIZE / OLED_BLOCK_COUNT) // 64 (compile time mathed) + + // For 90 degree rotation, we map our internal matrix to oled matrix using fixed arrays + // The OLED writes to it's memory horizontally, starting top left, but our memory starts bottom left in this mode + #define OLED_SOURCE_MAP { 0, 8, 16, 24, 32, 40, 48, 56 } + #define OLED_TARGET_MAP { 56, 48, 40, 32, 24, 16, 8, 0 } + // If OLED_BLOCK_TYPE is uint8_t, these tables would look like: + // #define OLED_SOURCE_MAP { 0, 8, 16, 24, 32, 40, 48, 56, 64, 72, 80, 88, 96, 104, 112, 120 } + // #define OLED_TARGET_MAP { 56, 120, 48, 112, 40, 104, 32, 96, 24, 88, 16, 80, 8, 72, 0, 64 } +#else // defined(OLED_DISPLAY_128X64) + // Default 128x32 + #define OLED_DISPLAY_WIDTH 128 + #define OLED_DISPLAY_HEIGHT 32 + #define OLED_MATRIX_SIZE (OLED_DISPLAY_HEIGHT / 8 * OLED_DISPLAY_WIDTH) // 512 (compile time mathed) + #define OLED_BLOCK_TYPE uint8_t // Type to use for segmenting the oled display for smart rendering, use unsigned types only + #define OLED_BLOCK_COUNT (sizeof(OLED_BLOCK_TYPE) * 8) // 8 (compile time mathed) + #define OLED_BLOCK_SIZE (OLED_MATRIX_SIZE / OLED_BLOCK_COUNT) // 128 (compile time mathed) + + // For 90 degree rotation, we map our internal matrix to oled matrix using fixed arrays + // The OLED writes to it's memory horizontally, starting top left, but our memory starts bottom left in this mode + #define OLED_SOURCE_MAP { 0, 8, 16, 24, 32, 40, 48, 56 } + #define OLED_TARGET_MAP { 48, 32, 16, 0, 56, 40, 24, 8 } +#endif // defined(OLED_DISPLAY_CUSTOM) + +// Address to use for tthe i2d oled communication +#if !defined(OLED_DISPLAY_ADDRESS) + #define OLED_DISPLAY_ADDRESS 0x3C +#endif + +// Custom font file to use +#if !defined(OLED_FONT_H) + #define OLED_FONT_H "glcdfont.c" +#endif +// unsigned char value of the first character in the font file +#if !defined(OLED_FONT_START) + #define OLED_FONT_START 0 +#endif +// unsigned char value of the last character in the font file +#if !defined(OLED_FONT_END) + #define OLED_FONT_END 224 +#endif +// Font render width +#if !defined(OLED_FONT_WIDTH) + #define OLED_FONT_WIDTH 6 +#endif +// Font render height +#if !defined(OLED_FONT_HEIGHT) + #define OLED_FONT_HEIGHT 8 +#endif + +#define OLED_ROTATION_0 0x00 +#define OLED_ROTATION_90 0x01 +#define OLED_ROTATION_180 0x02 +#define OLED_ROTATION_270 0x03 + +// Initialize the oled display, rotating the rendered output based on the define passed in. +// Returns true if the OLED was initialized successfully +bool oled_init(uint8_t rotation); + +// Called at the start of oled_init, weak function overridable by the user +// rotation - the value passed into oled_init +// Return new uint8_t if you want to override default rotation +uint8_t oled_init_user(uint8_t rotation); + +// Clears the display buffer, resets cursor position to 0, and sets the buffer to dirty for rendering +void oled_clear(void); + +// Renders the dirty chunks of the buffer to oled display +void oled_render(void); + +// Moves cursor to character position indicated by column and line, wraps if out of bounds +// Max column denoted by 'oled_max_chars()' and max lines by 'oled_max_lines()' functions +void oled_set_cursor(uint8_t col, uint8_t line); + +// Advances the cursor to the next page, writing ' ' if true +// Wraps to the begining when out of bounds +void oled_advance_page(bool clearPageRemainder); + +// Moves the cursor forward 1 character length +// Advance page if there is not enough room for the next character +// Wraps to the begining when out of bounds +void oled_advance_char(void); + +// Writes a single character to the buffer at current cursor position +// Advances the cursor while writing, inverts the pixels if true +// Main handler that writes character data to the display buffer +void oled_write_char(const char data, bool invert); + +// Writes a string to the buffer at current cursor position +// Advances the cursor while writing, inverts the pixels if true +void oled_write(const char *data, bool invert); + +// Writes a string to the buffer at current cursor position +// Advances the cursor while writing, inverts the pixels if true +// Advances the cursor to the next page, wiring ' ' to the remainder of the current page +void oled_write_ln(const char *data, bool invert); + +#if defined(__AVR__) +// Writes a PROGMEM string to the buffer at current cursor position +// Advances the cursor while writing, inverts the pixels if true +// Remapped to call 'void oled_write(const char *data, bool invert);' on ARM +void oled_write_P(const char *data, bool invert); + +// Writes a PROGMEM string to the buffer at current cursor position +// Advances the cursor while writing, inverts the pixels if true +// Advances the cursor to the next page, wiring ' ' to the remainder of the current page +// Remapped to call 'void oled_write_ln(const char *data, bool invert);' on ARM +void oled_write_ln_P(const char *data, bool invert); +#else + // Writes a string to the buffer at current cursor position + // Advances the cursor while writing, inverts the pixels if true + #define oled_write_P(data, invert) oled_write(data, invert) + + // Writes a string to the buffer at current cursor position + // Advances the cursor while writing, inverts the pixels if true + // Advances the cursor to the next page, wiring ' ' to the remainder of the current page + #define oled_write_ln_P(data, invert) oled_write(data, invert) +#endif // defined(__AVR__) + +// Can be used to manually turn on the screen if it is off +// Returns true if the screen was on or turns on +bool oled_on(void); + +// Can be used to manually turn off the screen if it is on +// Returns true if the screen was off or turns off +bool oled_off(void); + +// Basically it's oled_render, but with timeout management and oled_task_user calling! +void oled_task(void); + +// Called at the start of oled_task, weak function overridable by the user +void oled_task_user(void); + +// Scrolls the entire display right +// Returns true if the screen was scrolling or starts scrolling +// NOTE: display contents cannot be changed while scrolling +bool oled_scroll_right(void); + +// Scrolls the entire display left +// Returns true if the screen was scrolling or starts scrolling +// NOTE: display contents cannot be changed while scrolling +bool oled_scroll_left(void); + +// Turns off display scrolling +// Returns true if the screen was not scrolling or stops scrolling +bool oled_scroll_off(void); + +// Returns the maximum number of characters that will fit on a line +uint8_t oled_max_chars(void); + +// Returns the maximum number of lines that will fit on the oled +uint8_t oled_max_lines(void); diff --git a/keyboards/cannonkeys/satisfaction75/i2c_master.c b/keyboards/cannonkeys/satisfaction75/i2c_master.c index d81eb92d494..ce0e0a7ba16 100644 --- a/keyboards/cannonkeys/satisfaction75/i2c_master.c +++ b/keyboards/cannonkeys/satisfaction75/i2c_master.c @@ -29,8 +29,6 @@ #include "quantum.h" #include #include -#include "chtypes.h" -#include "ch.h" static uint8_t i2c_address; @@ -44,6 +42,18 @@ static const I2CConfig i2cconfig = { 0 }; +static i2c_status_t chibios_to_qmk(const msg_t* status) { + switch (*status) { + case I2C_NO_ERROR: + return I2C_STATUS_SUCCESS; + case I2C_TIMEOUT: + return I2C_STATUS_TIMEOUT; + // I2C_BUS_ERROR, I2C_ARBITRATION_LOST, I2C_ACK_FAILURE, I2C_OVERRUN, I2C_PEC_ERROR, I2C_SMB_ALERT + default: + return I2C_STATUS_ERROR; + } +} + __attribute__ ((weak)) void i2c_init(void) { @@ -59,34 +69,32 @@ void i2c_init(void) //i2cInit(); //This is invoked by halInit() so no need to redo it. } -// This is usually not needed -uint8_t i2c_start(uint8_t address) +i2c_status_t i2c_start(uint8_t address) { i2c_address = address; i2cStart(&I2C_DRIVER, &i2cconfig); - return 0; + return I2C_STATUS_SUCCESS; } -uint8_t i2c_transmit(uint8_t address, uint8_t* data, uint16_t length, uint16_t timeout) +i2c_status_t i2c_transmit(uint8_t address, const uint8_t* data, uint16_t length, uint16_t timeout) { - msg_t status = MSG_OK; - i2c_address = address; i2cStart(&I2C_DRIVER, &i2cconfig); i2cAcquireBus(&I2C_DRIVER); - status = i2cMasterTransmitTimeout(&I2C_DRIVER, (i2c_address >> 1), data, length, 0, 0, MS2ST(timeout)); + msg_t status = i2cMasterTransmitTimeout(&I2C_DRIVER, (i2c_address >> 1), data, length, 0, 0, MS2ST(timeout)); i2cReleaseBus(&I2C_DRIVER); - return status; + return chibios_to_qmk(&status); } -uint8_t i2c_receive(uint8_t address, uint8_t* data, uint16_t length, uint16_t timeout) +i2c_status_t i2c_receive(uint8_t address, uint8_t* data, uint16_t length, uint16_t timeout) { i2c_address = address; i2cStart(&I2C_DRIVER, &i2cconfig); - return i2cMasterReceiveTimeout(&I2C_DRIVER, (i2c_address >> 1), data, length, MS2ST(timeout)); + msg_t status = i2cMasterReceiveTimeout(&I2C_DRIVER, (i2c_address >> 1), data, length, MS2ST(timeout)); + return chibios_to_qmk(&status); } -uint8_t i2c_writeReg(uint8_t devaddr, uint8_t regaddr, uint8_t* data, uint16_t length, uint16_t timeout) +i2c_status_t i2c_writeReg(uint8_t devaddr, uint8_t regaddr, const uint8_t* data, uint16_t length, uint16_t timeout) { i2c_address = devaddr; i2cStart(&I2C_DRIVER, &i2cconfig); @@ -98,19 +106,19 @@ uint8_t i2c_writeReg(uint8_t devaddr, uint8_t regaddr, uint8_t* data, uint16_t l } complete_packet[0] = regaddr; - return i2cMasterTransmitTimeout(&I2C_DRIVER, (i2c_address >> 1), complete_packet, length + 1, 0, 0, MS2ST(timeout)); + msg_t status = i2cMasterTransmitTimeout(&I2C_DRIVER, (i2c_address >> 1), complete_packet, length + 1, 0, 0, MS2ST(timeout)); + return chibios_to_qmk(&status); } -uint8_t i2c_readReg(uint8_t devaddr, uint8_t* regaddr, uint8_t* data, uint16_t length, uint16_t timeout) +i2c_status_t i2c_readReg(uint8_t devaddr, uint8_t* regaddr, uint8_t* data, uint16_t length, uint16_t timeout) { i2c_address = devaddr; i2cStart(&I2C_DRIVER, &i2cconfig); - return i2cMasterTransmitTimeout(&I2C_DRIVER, (i2c_address >> 1), regaddr, 1, data, length, MS2ST(timeout)); + msg_t status = i2cMasterTransmitTimeout(&I2C_DRIVER, (i2c_address >> 1), regaddr, 1, data, length, MS2ST(timeout)); + return chibios_to_qmk(&status); } -// This is usually not needed. It releases the driver to allow pins to become GPIO again. -uint8_t i2c_stop(void) +void i2c_stop(void) { i2cStop(&I2C_DRIVER); - return 0; } diff --git a/keyboards/sol/common/glcdfont.c b/keyboards/sol/common/glcdfont.c index 89665ba0743..f772e31811b 100644 --- a/keyboards/sol/common/glcdfont.c +++ b/keyboards/sol/common/glcdfont.c @@ -1,8 +1,4 @@ -// This is the 'classic' fixed-space bitmap font for Adafruit_GFX since 1.0. -// See gfxfont.h for newer custom bitmap font info. - -#ifndef FONT5X7_H -#define FONT5X7_H +#pragma once #ifdef __AVR__ #include @@ -13,7 +9,8 @@ #define PROGMEM #endif -// Standard ASCII 5x7 font +// Helidox 8x6 font with RGBKB SOL Logo +// Online editor: http://teripom.x0.com/ static const unsigned char font[] PROGMEM = { 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, @@ -144,27 +141,27 @@ static const unsigned char font[] PROGMEM = { 0x00, 0x41, 0x36, 0x08, 0x00, 0x00, 0x02, 0x01, 0x02, 0x04, 0x02, 0x00, 0x3C, 0x26, 0x23, 0x26, 0x3C, 0x00, - 0x03, 0x07, 0x1F, 0x7F, 0xFF, 0xFF, - 0xFE, 0xF8, 0xF0, 0xC0, 0x20, 0xF8, - 0xFE, 0xFF, 0xFE, 0x79, 0x27, 0x1F, - 0x7F, 0xFF, 0xFF, 0xFE, 0xF8, 0xF0, - 0xC0, 0x20, 0xF8, 0xFE, 0xFF, 0xFF, - 0x7F, 0x3F, 0x3F, 0x7F, 0xFF, 0xFE, - 0xF8, 0xF0, 0xC0, 0x00, 0x00, 0x00, - 0x00, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, - 0xFF, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0xFF, 0x7F, 0x7F, 0x7F, - 0xBF, 0xBF, 0xC0, 0xC0, 0xC0, 0xE0, - 0xE0, 0xE0, 0xE0, 0xF0, 0xF0, 0xF0, - 0xF8, 0x78, 0x78, 0x7C, 0x3C, 0x3C, - 0xFE, 0xFE, 0xFE, 0xFF, 0xFF, 0xFF, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x80, 0x00, + 0x00, 0x00, 0x00, 0x80, 0x80, 0x80, 0x00, 0x00, 0x00, 0x00, 0x80, 0x80, - 0xBF, 0xBF, 0xDF, 0xDF, 0xEF, 0xEF, - 0x00, 0x03, 0x07, 0x1F, 0x7F, 0xFF, - 0xFF, 0xFF, 0xFE, 0xF8, 0xE0, 0xC0, - 0xE0, 0xF8, 0xFE, 0xFF, 0xFF, 0xFF, - 0x7F, 0x1F, 0x07, 0x03, 0x00, 0x00, + 0x80, 0x80, 0x80, 0x80, 0x80, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x80, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x80, 0x00, 0x00, 0x0C, 0x90, + 0xB0, 0xE0, 0x72, 0x31, 0x9B, 0xDE, + 0xCE, 0xEC, 0xEE, 0xE9, 0xE9, 0xEC, + 0xCF, 0xDA, 0x99, 0x3E, 0x62, 0xE4, + 0xC4, 0x70, 0x10, 0x10, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x60, + 0xC0, 0xC0, 0x80, 0x80, 0x02, 0x85, + 0x85, 0x87, 0x85, 0x89, 0x89, 0x92, + 0xEA, 0xC6, 0xC4, 0x48, 0x50, 0x60, + 0x40, 0x40, 0x40, 0x40, 0xC0, 0xE0, + 0x50, 0x28, 0x10, 0x10, 0x60, 0xC0, + 0x40, 0x40, 0x40, 0x40, 0x80, 0x80, + 0x80, 0x80, 0x80, 0xE0, 0xF8, 0xFC, + 0xF8, 0xF0, 0x00, 0x00, 0x00, 0x00, 0xE0, 0xF0, 0xF0, 0xF0, 0xE0, 0xEC, 0xEE, 0xF7, 0xF3, 0x70, 0x20, 0x00, 0x7C, 0x7C, 0x7C, 0x7E, 0x00, 0x7E, @@ -173,30 +170,30 @@ static const unsigned char font[] PROGMEM = { 0x4F, 0x5B, 0xFE, 0xC0, 0x00, 0x00, 0xC0, 0x00, 0xDC, 0xD7, 0xDE, 0xDE, 0xDE, 0xD7, 0xDC, 0x00, 0xC0, 0x00, + 0x00, 0x00, 0x00, 0xE0, 0xEC, 0xDF, + 0xFC, 0xE0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x7F, 0x80, 0x80, + 0x80, 0x70, 0x0F, 0x00, 0x00, 0x80, + 0x7F, 0x00, 0x00, 0x7F, 0x80, 0x80, + 0x80, 0x80, 0x80, 0x80, 0x80, 0x7F, + 0x00, 0x00, 0x80, 0x80, 0x80, 0x80, + 0x80, 0x80, 0x80, 0xFF, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0xC1, 0xF3, - 0xCF, 0xBF, 0x7F, 0xFF, 0xFF, 0xFC, - 0xFB, 0xE7, 0x81, 0x00, 0x00, 0x00, - 0x00, 0x80, 0xE3, 0xCF, 0x3F, 0xFF, - 0xFF, 0xFF, 0xFC, 0xFB, 0xE7, 0x81, - 0x00, 0x00, 0x00, 0x00, 0x81, 0xE7, - 0xFF, 0xFF, 0xFF, 0xFF, 0x3C, 0x00, - 0x00, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, - 0xFF, 0xF8, 0xF8, 0xFC, 0x7C, 0x7E, - 0x7E, 0x3E, 0xFE, 0xFF, 0xFF, 0xFF, - 0xFF, 0xFF, 0xF7, 0xF7, 0xF7, 0xFB, - 0xFB, 0x7D, 0x7D, 0x7D, 0xBE, 0xBE, - 0xBE, 0xDF, 0xDF, 0xE0, 0xE0, 0x00, + 0x00, 0x40, 0x21, 0x33, 0x3B, 0x7B, + 0xFF, 0x00, 0x7C, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, - 0x00, 0xFC, 0xFC, 0x7C, 0x7E, 0x7E, - 0x3E, 0x3E, 0x1F, 0x1F, 0x1F, 0x0F, - 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x81, - 0xE7, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, - 0xFF, 0xFF, 0xFF, 0xFF, 0xE7, 0x81, + 0xFF, 0xFF, 0xFF, 0xFF, 0x7C, 0x01, + 0xFF, 0xDE, 0x8C, 0x04, 0x0C, 0x08, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x01, 0x01, 0x01, 0x7F, 0x80, + 0x80, 0xBE, 0xBE, 0x80, 0x80, 0x80, + 0xC1, 0xFF, 0x80, 0x04, 0x32, 0x5E, + 0x1C, 0x3D, 0x26, 0x10, 0xC1, 0xFF, + 0x3E, 0x00, 0x00, 0x08, 0x36, 0xC1, + 0x08, 0x08, 0x14, 0x77, 0x94, 0x94, + 0x94, 0xF7, 0x94, 0xF7, 0x9C, 0x9C, + 0xFF, 0xFF, 0x1E, 0x00, 0x00, 0x00, 0x0F, 0x1F, 0x3F, 0x7F, 0x7F, 0x7F, 0x7F, 0x7F, 0x3F, 0x1E, 0x0C, 0x00, 0x1F, 0x1F, 0x1F, 0x3F, 0x00, 0x3F, @@ -205,30 +202,31 @@ static const unsigned char font[] PROGMEM = { 0x20, 0x30, 0x78, 0x7F, 0x3B, 0x00, 0x03, 0x00, 0x0F, 0x7F, 0x0F, 0x0F, 0x0F, 0x7F, 0x0F, 0x00, 0x03, 0x00, + 0x40, 0x7C, 0x3F, 0x3F, 0x23, 0x01, + 0x23, 0x3F, 0x37, 0x6C, 0x40, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x60, 0x70, 0x7C, 0x7F, 0x7F, 0x7F, - 0x7F, 0x1F, 0x06, 0x01, 0x03, 0x0F, - 0x3F, 0x7F, 0x7F, 0x7E, 0x7C, 0x7C, - 0x7E, 0x7F, 0x7F, 0x7F, 0x1F, 0x06, - 0x01, 0x07, 0x0F, 0x3F, 0x7F, 0x7F, - 0x7E, 0x7C, 0x7C, 0x7E, 0x7F, 0x7F, - 0x3F, 0x0F, 0x03, 0x00, 0x00, 0x00, - 0x00, 0x7F, 0x7F, 0x7F, 0x7F, 0x7F, - 0x7F, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x7F, 0x7F, 0x7F, 0x7F, - 0x7F, 0x7F, 0x7D, 0x7D, 0x3D, 0x3E, - 0x1E, 0x1F, 0x1F, 0x1F, 0x0F, 0x0F, - 0x07, 0x07, 0x07, 0x03, 0x03, 0x00, - 0x7F, 0x7F, 0x7F, 0x7F, 0x7F, 0x7F, - 0x7C, 0x7C, 0x7C, 0x7C, 0x7C, 0x7C, - 0x7C, 0x7C, 0x7C, 0x7C, 0x7C, 0x00, - 0x7F, 0x7F, 0x7F, 0x7F, 0x7F, 0x7F, - 0x00, 0x40, 0x70, 0x78, 0x7E, 0x7F, - 0x7F, 0x7F, 0x3F, 0x0F, 0x03, 0x01, - 0x03, 0x0F, 0x3F, 0x7F, 0x7F, 0x7F, - 0x7E, 0x78, 0x70, 0x40, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x06, 0x02, 0x06, + 0x4D, 0x4F, 0x8C, 0xF9, 0x73, 0x37, + 0x27, 0x2F, 0x2F, 0xAF, 0xEF, 0x6F, + 0x77, 0x17, 0x33, 0x79, 0xCC, 0x1F, + 0x31, 0x20, 0x21, 0x02, 0x02, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x40, 0xE0, + 0xA0, 0xA0, 0xD0, 0x90, 0x48, 0x48, + 0x25, 0x2B, 0x11, 0x09, 0x05, 0x03, + 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, + 0x01, 0x03, 0x02, 0x04, 0x03, 0x01, + 0x01, 0x01, 0x01, 0x01, 0x01, 0x00, + 0x00, 0x00, 0x00, 0x03, 0x0F, 0x1F, + 0x0F, 0x03, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, @@ -239,6 +237,4 @@ static const unsigned char font[] PROGMEM = { 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 }; -#endif // FONT5X7_H diff --git a/keyboards/sol/common/ssd1306.c b/keyboards/sol/common/ssd1306.c deleted file mode 100644 index b3e55a67c20..00000000000 --- a/keyboards/sol/common/ssd1306.c +++ /dev/null @@ -1,329 +0,0 @@ -#ifdef SSD1306OLED - -#include "ssd1306.h" -#include "i2c.h" -#include -#include "print.h" -#ifndef LOCAL_GLCDFONT -#include "common/glcdfont.c" -#else -#include -#endif -#ifdef ADAFRUIT_BLE_ENABLE -#include "adafruit_ble.h" -#endif -#ifdef PROTOCOL_LUFA -#include "lufa.h" -#endif -#include "sendchar.h" -#include "timer.h" - -// Set this to 1 to help diagnose early startup problems -// when testing power-on with ble. Turn it off otherwise, -// as the latency of printing most of the debug info messes -// with the matrix scan, causing keys to drop. -#define DEBUG_TO_SCREEN 0 - -//static uint16_t last_battery_update; -//static uint32_t vbat; -//#define BatteryUpdateInterval 10000 /* milliseconds */ -#define ScreenOffInterval 300000 /* milliseconds */ -#if DEBUG_TO_SCREEN -static uint8_t displaying; -#endif -static uint16_t last_flush; - -// Write command sequence. -// Returns true on success. -static inline bool _send_cmd1(uint8_t cmd) { - bool res = false; - - if (i2c_start_write(SSD1306_ADDRESS)) { - xprintf("failed to start write to %d\n", SSD1306_ADDRESS); - goto done; - } - - if (i2c_master_write(0x0 /* command byte follows */)) { - print("failed to write control byte\n"); - - goto done; - } - - if (i2c_master_write(cmd)) { - xprintf("failed to write command %d\n", cmd); - goto done; - } - res = true; -done: - i2c_master_stop(); - return res; -} - -// Write 2-byte command sequence. -// Returns true on success -static inline bool _send_cmd2(uint8_t cmd, uint8_t opr) { - if (!_send_cmd1(cmd)) { - return false; - } - return _send_cmd1(opr); -} - -// Write 3-byte command sequence. -// Returns true on success -static inline bool _send_cmd3(uint8_t cmd, uint8_t opr1, uint8_t opr2) { - if (!_send_cmd1(cmd)) { - return false; - } - if (!_send_cmd1(opr1)) { - return false; - } - return _send_cmd1(opr2); -} - -#define send_cmd1(c) if (!_send_cmd1(c)) {goto done;} -#define send_cmd2(c,o) if (!_send_cmd2(c,o)) {goto done;} -#define send_cmd3(c,o1,o2) if (!_send_cmd3(c,o1,o2)) {goto done;} - -static void clear_display(void) { - matrix_clear(&display); - - // Clear all of the display bits (there can be random noise - // in the RAM on startup) - send_cmd3(PageAddr, 0, (DisplayHeight / 8) - 1); - send_cmd3(ColumnAddr, 0, DisplayWidth - 1); - - if (i2c_start_write(SSD1306_ADDRESS)) { - goto done; - } - if (i2c_master_write(0x40)) { - // Data mode - goto done; - } - for (uint8_t row = 0; row < MatrixRows; ++row) { - for (uint8_t col = 0; col < DisplayWidth; ++col) { - i2c_master_write(0); - } - } - - display.dirty = false; - -done: - i2c_master_stop(); -} - -#if DEBUG_TO_SCREEN -#undef sendchar -static int8_t capture_sendchar(uint8_t c) { - sendchar(c); - iota_gfx_write_char(c); - - if (!displaying) { - iota_gfx_flush(); - } - return 0; -} -#endif - -bool iota_gfx_init(bool rotate) { - bool success = false; - - i2c_master_init(); - send_cmd1(DisplayOff); - send_cmd2(SetDisplayClockDiv, 0x80); - send_cmd2(SetMultiPlex, DisplayHeight - 1); - - send_cmd2(SetDisplayOffset, 0); - - - send_cmd1(SetStartLine | 0x0); - send_cmd2(SetChargePump, 0x14 /* Enable */); - send_cmd2(SetMemoryMode, 0 /* horizontal addressing */); - - if(rotate){ - // the following Flip the display orientation 180 degrees - send_cmd1(SegRemap); - send_cmd1(ComScanInc); - }else{ - // Flips the display orientation 0 degrees - send_cmd1(SegRemap | 0x1); - send_cmd1(ComScanDec); - } - - send_cmd2(SetComPins, 0x2); - send_cmd2(SetContrast, 0x8f); - send_cmd2(SetPreCharge, 0xf1); - send_cmd2(SetVComDetect, 0x40); - send_cmd1(DisplayAllOnResume); - send_cmd1(NormalDisplay); - send_cmd1(DeActivateScroll); - send_cmd1(DisplayOn); - - send_cmd2(SetContrast, 0); // Dim - - clear_display(); - - success = true; - - iota_gfx_flush(); - -#if DEBUG_TO_SCREEN - print_set_sendchar(capture_sendchar); -#endif - -done: - return success; -} - -bool iota_gfx_off(void) { - bool success = false; - - send_cmd1(DisplayOff); - success = true; - -done: - return success; -} - -bool iota_gfx_on(void) { - bool success = false; - - send_cmd1(DisplayOn); - success = true; - -done: - return success; -} - -void matrix_write_char_inner(struct CharacterMatrix *matrix, uint8_t c) { - *matrix->cursor = c; - ++matrix->cursor; - - if (matrix->cursor - &matrix->display[0][0] == sizeof(matrix->display)) { - // We went off the end; scroll the display upwards by one line - memmove(&matrix->display[0], &matrix->display[1], - MatrixCols * (MatrixRows - 1)); - matrix->cursor = &matrix->display[MatrixRows - 1][0]; - memset(matrix->cursor, ' ', MatrixCols); - } -} - -void matrix_write_char(struct CharacterMatrix *matrix, uint8_t c) { - matrix->dirty = true; - - if (c == '\n') { - // Clear to end of line from the cursor and then move to the - // start of the next line - uint8_t cursor_col = (matrix->cursor - &matrix->display[0][0]) % MatrixCols; - - while (cursor_col++ < MatrixCols) { - matrix_write_char_inner(matrix, ' '); - } - return; - } - - matrix_write_char_inner(matrix, c); -} - -void iota_gfx_write_char(uint8_t c) { - matrix_write_char(&display, c); -} - -void matrix_write(struct CharacterMatrix *matrix, const char *data) { - const char *end = data + strlen(data); - while (data < end) { - matrix_write_char(matrix, *data); - ++data; - } -} - -void iota_gfx_write(const char *data) { - matrix_write(&display, data); -} - -void matrix_write_P(struct CharacterMatrix *matrix, const char *data) { - while (true) { - uint8_t c = pgm_read_byte(data); - if (c == 0) { - return; - } - matrix_write_char(matrix, c); - ++data; - } -} - -void iota_gfx_write_P(const char *data) { - matrix_write_P(&display, data); -} - -void matrix_clear(struct CharacterMatrix *matrix) { - memset(matrix->display, ' ', sizeof(matrix->display)); - matrix->cursor = &matrix->display[0][0]; - matrix->dirty = true; -} - -void iota_gfx_clear_screen(void) { - matrix_clear(&display); -} - -void matrix_render(struct CharacterMatrix *matrix) { - last_flush = timer_read(); - iota_gfx_on(); -#if DEBUG_TO_SCREEN - ++displaying; -#endif - - // Move to the home position - send_cmd3(PageAddr, 0, MatrixRows - 1); - send_cmd3(ColumnAddr, 0, (MatrixCols * FontWidth) - 1); - - if (i2c_start_write(SSD1306_ADDRESS)) { - goto done; - } - if (i2c_master_write(0x40)) { - // Data mode - goto done; - } - - for (uint8_t row = 0; row < MatrixRows; ++row) { - for (uint8_t col = 0; col < MatrixCols; ++col) { - const uint8_t *glyph = font + (matrix->display[row][col] * FontWidth); - - for (uint8_t glyphCol = 0; glyphCol < FontWidth; ++glyphCol) { - uint8_t colBits = pgm_read_byte(glyph + glyphCol); - i2c_master_write(colBits); - } - - // 1 column of space between chars (it's not included in the glyph) - //i2c_master_write(0); - } - } - - matrix->dirty = false; - -done: - i2c_master_stop(); -#if DEBUG_TO_SCREEN - --displaying; -#endif -} - -void iota_gfx_flush(void) { - matrix_render(&display); -} - -__attribute__ ((weak)) -void iota_gfx_task_user(void) { -} - -void iota_gfx_task(void) { - iota_gfx_task_user(); - - if (display.dirty) { - iota_gfx_flush(); - } - - if (timer_elapsed(last_flush) > ScreenOffInterval) { - iota_gfx_off(); - } -} -#endif diff --git a/keyboards/sol/common/ssd1306.h b/keyboards/sol/common/ssd1306.h deleted file mode 100644 index 77ce7c211a0..00000000000 --- a/keyboards/sol/common/ssd1306.h +++ /dev/null @@ -1,92 +0,0 @@ -#ifndef SSD1306_H -#define SSD1306_H - -#include -#include -#include "pincontrol.h" - -enum ssd1306_cmds { - DisplayOff = 0xAE, - DisplayOn = 0xAF, - - SetContrast = 0x81, - DisplayAllOnResume = 0xA4, - - DisplayAllOn = 0xA5, - NormalDisplay = 0xA6, - InvertDisplay = 0xA7, - SetDisplayOffset = 0xD3, - SetComPins = 0xda, - SetVComDetect = 0xdb, - SetDisplayClockDiv = 0xD5, - SetPreCharge = 0xd9, - SetMultiPlex = 0xa8, - SetLowColumn = 0x00, - SetHighColumn = 0x10, - SetStartLine = 0x40, - - SetMemoryMode = 0x20, - ColumnAddr = 0x21, - PageAddr = 0x22, - - ComScanInc = 0xc0, - ComScanDec = 0xc8, - SegRemap = 0xa0, - SetChargePump = 0x8d, - ExternalVcc = 0x01, - SwitchCapVcc = 0x02, - - ActivateScroll = 0x2f, - DeActivateScroll = 0x2e, - SetVerticalScrollArea = 0xa3, - RightHorizontalScroll = 0x26, - LeftHorizontalScroll = 0x27, - VerticalAndRightHorizontalScroll = 0x29, - VerticalAndLeftHorizontalScroll = 0x2a, -}; - -// Controls the SSD1306 128x32 OLED display via i2c - -#ifndef SSD1306_ADDRESS -#define SSD1306_ADDRESS 0x3C -#endif - -#define DisplayHeight 32 -#define DisplayWidth 128 - -#define FontHeight 8 -#define FontWidth 6 - -#define MatrixRows (DisplayHeight / FontHeight) -#define MatrixCols (DisplayWidth / FontWidth) - -struct CharacterMatrix { - uint8_t display[MatrixRows][MatrixCols]; - uint8_t *cursor; - bool dirty; -}; - -struct CharacterMatrix display; - -bool iota_gfx_init(bool rotate); -void iota_gfx_task(void); -bool iota_gfx_off(void); -bool iota_gfx_on(void); -void iota_gfx_flush(void); -void iota_gfx_write_char(uint8_t c); -void iota_gfx_write(const char *data); -void iota_gfx_write_P(const char *data); -void iota_gfx_clear_screen(void); - -void iota_gfx_task_user(void); - -void matrix_clear(struct CharacterMatrix *matrix); -void matrix_write_char_inner(struct CharacterMatrix *matrix, uint8_t c); -void matrix_write_char(struct CharacterMatrix *matrix, uint8_t c); -void matrix_write(struct CharacterMatrix *matrix, const char *data); -void matrix_write_P(struct CharacterMatrix *matrix, const char *data); -void matrix_render(struct CharacterMatrix *matrix); - - - -#endif diff --git a/keyboards/sol/i2c.c b/keyboards/sol/i2c.c deleted file mode 100644 index 4bee5c63982..00000000000 --- a/keyboards/sol/i2c.c +++ /dev/null @@ -1,162 +0,0 @@ -#include -#include -#include -#include -#include -#include -#include "i2c.h" - -#ifdef USE_I2C - -// Limits the amount of we wait for any one i2c transaction. -// Since were running SCL line 100kHz (=> 10μs/bit), and each transactions is -// 9 bits, a single transaction will take around 90μs to complete. -// -// (F_CPU/SCL_CLOCK) => # of μC cycles to transfer a bit -// poll loop takes at least 8 clock cycles to execute -#define I2C_LOOP_TIMEOUT (9+1)*(F_CPU/SCL_CLOCK)/8 - -#define BUFFER_POS_INC() (slave_buffer_pos = (slave_buffer_pos+1)%SLAVE_BUFFER_SIZE) - -volatile uint8_t i2c_slave_buffer[SLAVE_BUFFER_SIZE]; - -static volatile uint8_t slave_buffer_pos; -static volatile bool slave_has_register_set = false; - -// Wait for an i2c operation to finish -inline static -void i2c_delay(void) { - uint16_t lim = 0; - while(!(TWCR & (1<10. - // Check datasheets for more info. - TWBR = ((F_CPU/SCL_CLOCK)-16)/2; -} - -// Start a transaction with the given i2c slave address. The direction of the -// transfer is set with I2C_READ and I2C_WRITE. -// returns: 0 => success -// 1 => error -uint8_t i2c_master_start(uint8_t address) { - TWCR = (1< slave ACK -// 1 => slave NACK -uint8_t i2c_master_write(uint8_t data) { - TWDR = data; - TWCR = (1<= SLAVE_BUFFER_SIZE ) { - ack = 0; - slave_buffer_pos = 0; - } - slave_has_register_set = true; - } else { - i2c_slave_buffer[slave_buffer_pos] = TWDR; - BUFFER_POS_INC(); - } - break; - - case TW_ST_SLA_ACK: - case TW_ST_DATA_ACK: - // master has addressed this device as a slave transmitter and is - // requesting data. - TWDR = i2c_slave_buffer[slave_buffer_pos]; - BUFFER_POS_INC(); - break; - - case TW_BUS_ERROR: // something went wrong, reset twi state - TWCR = 0; - default: - break; - } - // Reset everything, so we are ready for the next TWI interrupt - TWCR |= (1< - -#ifndef F_CPU -#define F_CPU 16000000UL -#endif - -#define I2C_READ 1 -#define I2C_WRITE 0 - -#define I2C_ACK 1 -#define I2C_NACK 0 - -#define SLAVE_BUFFER_SIZE 0x10 - -// i2c SCL clock frequency 400kHz -#define SCL_CLOCK 400000L - -extern volatile uint8_t i2c_slave_buffer[SLAVE_BUFFER_SIZE]; - -void i2c_master_init(void); -uint8_t i2c_master_start(uint8_t address); -void i2c_master_stop(void); -uint8_t i2c_master_write(uint8_t data); -uint8_t i2c_master_read(int); -void i2c_reset_state(void); -void i2c_slave_init(uint8_t address); - - -static inline unsigned char i2c_start_read(unsigned char addr) { - return i2c_master_start((addr << 1) | I2C_READ); -} - -static inline unsigned char i2c_start_write(unsigned char addr) { - return i2c_master_start((addr << 1) | I2C_WRITE); -} - -// from SSD1306 scrips -extern unsigned char i2c_rep_start(unsigned char addr); -extern void i2c_start_wait(unsigned char addr); -extern unsigned char i2c_readAck(void); -extern unsigned char i2c_readNak(void); -extern unsigned char i2c_read(unsigned char ack); - -#define i2c_read(ack) (ack) ? i2c_readAck() : i2c_readNak(); - -#endif diff --git a/keyboards/sol/keymaps/brianweyer/config.h b/keyboards/sol/keymaps/brianweyer/config.h index 87b7dd2ac0b..452cdda8235 100755 --- a/keyboards/sol/keymaps/brianweyer/config.h +++ b/keyboards/sol/keymaps/brianweyer/config.h @@ -20,8 +20,6 @@ along with this program. If not, see . #pragma once -#define SSD1306OLED - // place overrides here diff --git a/keyboards/sol/keymaps/brianweyer/keymap.c b/keyboards/sol/keymaps/brianweyer/keymap.c index 2259e246d26..9fd6ad6153d 100755 --- a/keyboards/sol/keymaps/brianweyer/keymap.c +++ b/keyboards/sol/keymaps/brianweyer/keymap.c @@ -3,9 +3,6 @@ #include "lufa.h" #include "split_util.h" #endif -#ifdef SSD1306OLED - #include "common/ssd1306.h" -#endif extern keymap_config_t keymap_config; @@ -175,38 +172,28 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) { } void matrix_init_user(void) { - #ifdef RGBLIGHT_ENABLE - RGB_current_mode = rgblight_config.mode; - #endif - //SSD1306 OLED init, make sure to add #define SSD1306OLED in config.h - #ifdef SSD1306OLED - iota_gfx_init(!has_usb()); // turns on the display - #endif -} - -void matrix_scan_user(void) { - #ifdef SSD1306OLED - // led_test_init(); - iota_gfx_task(); // this is what updates the display continuously - #endif +#ifdef RGBLIGHT_ENABLE + RGB_current_mode = rgblight_config.mode; +#endif } -//SSD1306 OLED update loop, make sure to add #define SSD1306OLED in config.h -#ifdef SSD1306OLED +// OLED Driver Logic +#ifdef OLED_DRIVER_ENABLE -// hook point for 'led_test' keymap -// 'default' keymap's led_test_init() is empty function, do nothing -// 'led_test' keymap's led_test_init() force rgblight_mode_noeeprom(35); -__attribute__ ((weak)) -void led_test_init(void) {} +uint8_t oled_init_user(uint8_t rotation) { + if (!has_usb()) + return OLED_ROTATION_180; // flip 180 for offhand + return rotation; +} -void matrix_update(struct CharacterMatrix *dest, - const struct CharacterMatrix *source) { - if (memcmp(dest->display, source->display, sizeof(dest->display))) { - memcpy(dest->display, source->display, sizeof(dest->display)); - dest->dirty = true; - } +static void render_logo(void) { + static const char PROGMEM sol_logo[] = { + 0x80,0x81,0x82,0x83,0x84,0x85,0x86,0x87,0x88,0x89,0x8a,0x8b,0x8c,0x8d,0x8e,0x8f,0x90,0x91,0x92,0x93,0x94, + 0xa0,0xa1,0xa2,0xa3,0xa4,0xa5,0xa6,0xa7,0xa8,0xa9,0xaa,0xab,0xac,0xad,0xae,0xaf,0xb0,0xb1,0xb2,0xb3,0xb4, + 0xc0,0xc1,0xc2,0xc3,0xc4,0xc5,0xc6,0xc7,0xc8,0xc9,0xca,0xcb,0xcc,0xcd,0xce,0xcf,0xd0,0xd1,0xd2,0xd3,0xd4,0}; + + oled_write_P(sol_logo, false); } //assign the right code to your layers for OLED display @@ -215,77 +202,52 @@ void matrix_update(struct CharacterMatrix *dest, #define L_ADJ (1<<_ADJ) #define L_ADJ_TRI (L_ADJ|L_FN) -static void render_logo(struct CharacterMatrix *matrix) { - - static char logo[]={ - 0x80,0x81,0x82,0x83,0x84,0x85,0x86,0x87,0x88,0x89,0x8a,0x8b,0x8c,0x8d,0x8e,0x8f,0x90,0x91,0x92,0x93,0x94, - 0xa0,0xa1,0xa2,0xa3,0xa4,0xa5,0xa6,0xa7,0xa8,0xa9,0xaa,0xab,0xac,0xad,0xae,0xaf,0xb0,0xb1,0xb2,0xb3,0xb4, - 0xc0,0xc1,0xc2,0xc3,0xc4,0xc5,0xc6,0xc7,0xc8,0xc9,0xca,0xcb,0xcc,0xcd,0xce,0xcf,0xd0,0xd1,0xd2,0xd3,0xd4, - 0}; - matrix_write(matrix, logo); -} - - - -void render_status(struct CharacterMatrix *matrix) { - +static void render_status(void) { // Render to mode icon - static char logo[][2][3]={{{0x95,0x96,0},{0xb5,0xb6,0}},{{0x97,0x98,0},{0xb7,0xb8,0}}}; - if(keymap_config.swap_lalt_lgui==false){ - matrix_write(matrix, logo[0][0]); - matrix_write_P(matrix, PSTR("\n")); - matrix_write(matrix, logo[0][1]); - }else{ - matrix_write(matrix, logo[1][0]); - matrix_write_P(matrix, PSTR("\n")); - matrix_write(matrix, logo[1][1]); + static const char PROGMEM mode_logo[4][4] = { + {0x95,0x96,0x0a,0}, + {0xb5,0xb6,0x0a,0}, + {0x97,0x98,0x0a,0}, + {0xb7,0xb8,0x0a,0} }; + + if (keymap_config.swap_lalt_lgui != false) { + oled_write_P(mode_logo[0], false); + oled_write_P(mode_logo[1], false); + } else { + oled_write_P(mode_logo[2], false); + oled_write_P(mode_logo[3], false); } // Define layers here, Have not worked out how to have text displayed for each layer. Copy down the number you see and add a case for it below - char buf[40]; - snprintf(buf,sizeof(buf), "Undef-%ld", layer_state); - matrix_write_P(matrix, PSTR("\nLayer: ")); - switch (layer_state) { - case L_BASE: - matrix_write_P(matrix, PSTR("Laser")); - break; - case L_FN: - matrix_write_P(matrix, PSTR("Function")); - break; - case L_ADJ: - case L_ADJ_TRI: - matrix_write_P(matrix, PSTR("Adjustment")); - break; - default: - matrix_write(matrix, buf); - } + + oled_write_P(PSTR("Layer: "), false); + switch (layer_state) { + case L_BASE: + oled_write_P(PSTR("Laser \n"), false); + break; + case L_FN: + oled_write_P(PSTR("Function \n"), false); + break; + case L_ADJ: + case L_ADJ_TRI: + oled_write_P(PSTR("Adjustment\n"), false); + break; + default: + oled_write_P(PSTR("Undefined \n"), false); + } // Host Keyboard LED Status - char led[40]; - snprintf(led, sizeof(led), "\n%s %s %s", - (host_keyboard_leds() & (1<display, source->display, sizeof(dest->display))) { - memcpy(dest->display, source->display, sizeof(dest->display)); - dest->dirty = true; - } +static void render_logo(void) { + static const char PROGMEM sol_logo[] = { + 0x80,0x81,0x82,0x83,0x84,0x85,0x86,0x87,0x88,0x89,0x8a,0x8b,0x8c,0x8d,0x8e,0x8f,0x90,0x91,0x92,0x93,0x94, + 0xa0,0xa1,0xa2,0xa3,0xa4,0xa5,0xa6,0xa7,0xa8,0xa9,0xaa,0xab,0xac,0xad,0xae,0xaf,0xb0,0xb1,0xb2,0xb3,0xb4, + 0xc0,0xc1,0xc2,0xc3,0xc4,0xc5,0xc6,0xc7,0xc8,0xc9,0xca,0xcb,0xcc,0xcd,0xce,0xcf,0xd0,0xd1,0xd2,0xd3,0xd4,0}; + + oled_write_P(sol_logo, false); } //assign the right code to your layers for OLED display #define L_BASE 0 #define L_FN (1<<_FN) #define L_ADJ (1<<_ADJ) +#define L_ADJ_TRI (L_ADJ|L_FN) -static void render_logo(struct CharacterMatrix *matrix) { - - static char logo[]={ - 0x80,0x81,0x82,0x83,0x84,0x85,0x86,0x87,0x88,0x89,0x8a,0x8b,0x8c,0x8d,0x8e,0x8f,0x90,0x91,0x92,0x93,0x94, - 0xa0,0xa1,0xa2,0xa3,0xa4,0xa5,0xa6,0xa7,0xa8,0xa9,0xaa,0xab,0xac,0xad,0xae,0xaf,0xb0,0xb1,0xb2,0xb3,0xb4, - 0xc0,0xc1,0xc2,0xc3,0xc4,0xc5,0xc6,0xc7,0xc8,0xc9,0xca,0xcb,0xcc,0xcd,0xce,0xcf,0xd0,0xd1,0xd2,0xd3,0xd4, - 0}; - matrix_write(matrix, logo); - //matrix_write_P(&matrix, PSTR(" Split keyboard kit")); -} - - - -void render_status(struct CharacterMatrix *matrix) { - +static void render_status(void) { // Render to mode icon - static char logo[][2][3]={{{0x95,0x96,0},{0xb5,0xb6,0}},{{0x97,0x98,0},{0xb7,0xb8,0}}}; - if(keymap_config.swap_lalt_lgui==false){ - matrix_write(matrix, logo[0][0]); - matrix_write_P(matrix, PSTR("\n")); - matrix_write(matrix, logo[0][1]); - }else{ - matrix_write(matrix, logo[1][0]); - matrix_write_P(matrix, PSTR("\n")); - matrix_write(matrix, logo[1][1]); + static const char PROGMEM mode_logo[4][4] = { + {0x95,0x96,0x0a,0}, + {0xb5,0xb6,0x0a,0}, + {0x97,0x98,0x0a,0}, + {0xb7,0xb8,0x0a,0} }; + + if (keymap_config.swap_lalt_lgui != false) { + oled_write_P(mode_logo[0], false); + oled_write_P(mode_logo[1], false); + } else { + oled_write_P(mode_logo[2], false); + oled_write_P(mode_logo[3], false); } // Define layers here, Have not worked out how to have text displayed for each layer. Copy down the number you see and add a case for it below - char buf[40]; - snprintf(buf,sizeof(buf), "Undef-%ld", layer_state); - matrix_write_P(matrix, PSTR("\nLayer: ")); - switch (layer_state) { - case L_BASE: - matrix_write_P(matrix, PSTR("Default")); - break; - case L_FN: - matrix_write_P(matrix, PSTR("FN")); - break; - case L_ADJ: - case L_ADJ_TRI: - matrix_write_P(matrix, PSTR("ADJ")); - break; - default: - matrix_write(matrix, buf); - } + oled_write_P(PSTR("Layer: "), false); + switch (layer_state) { + case L_BASE: + oled_write_P(PSTR("Default\n"), false); + break; + case L_FN: + oled_write_P(PSTR("FN \n"), false); + break; + case L_ADJ: + case L_ADJ_TRI: + oled_write_P(PSTR("ADJ \n"), false); + break; + default: + oled_write_P(PSTR("UNDEF \n"), false); + } // Host Keyboard LED Status - char led[40]; - snprintf(led, sizeof(led), "\n%s %s %s", - (host_keyboard_leds() & (1<display, source->display, sizeof(dest->display))) { - memcpy(dest->display, source->display, sizeof(dest->display)); - dest->dirty = true; - } +static void render_logo(void) { + static const char PROGMEM sol_logo[] = { + 0x80,0x81,0x82,0x83,0x84,0x85,0x86,0x87,0x88,0x89,0x8a,0x8b,0x8c,0x8d,0x8e,0x8f,0x90,0x91,0x92,0x93,0x94, + 0xa0,0xa1,0xa2,0xa3,0xa4,0xa5,0xa6,0xa7,0xa8,0xa9,0xaa,0xab,0xac,0xad,0xae,0xaf,0xb0,0xb1,0xb2,0xb3,0xb4, + 0xc0,0xc1,0xc2,0xc3,0xc4,0xc5,0xc6,0xc7,0xc8,0xc9,0xca,0xcb,0xcc,0xcd,0xce,0xcf,0xd0,0xd1,0xd2,0xd3,0xd4,0}; + + oled_write_P(sol_logo, false); } //assign the right code to your layers for OLED display #define L_BASE 0 #define L_FN (1<<_FN) #define L_ADJ (1<<_ADJ) +#define L_ADJ_TRI (L_ADJ|L_FN) -static void render_logo(struct CharacterMatrix *matrix) { - - static char logo[]={ - 0x80,0x81,0x82,0x83,0x84,0x85,0x86,0x87,0x88,0x89,0x8a,0x8b,0x8c,0x8d,0x8e,0x8f,0x90,0x91,0x92,0x93,0x94, - 0xa0,0xa1,0xa2,0xa3,0xa4,0xa5,0xa6,0xa7,0xa8,0xa9,0xaa,0xab,0xac,0xad,0xae,0xaf,0xb0,0xb1,0xb2,0xb3,0xb4, - 0xc0,0xc1,0xc2,0xc3,0xc4,0xc5,0xc6,0xc7,0xc8,0xc9,0xca,0xcb,0xcc,0xcd,0xce,0xcf,0xd0,0xd1,0xd2,0xd3,0xd4, - 0}; - matrix_write(matrix, logo); - //matrix_write_P(&matrix, PSTR(" Split keyboard kit")); -} - - - -void render_status(struct CharacterMatrix *matrix) { - +static void render_status(void) { // Render to mode icon - static char logo[][2][3]={{{0x95,0x96,0},{0xb5,0xb6,0}},{{0x97,0x98,0},{0xb7,0xb8,0}}}; - if(keymap_config.swap_lalt_lgui==false){ - matrix_write(matrix, logo[0][0]); - matrix_write_P(matrix, PSTR("\n")); - matrix_write(matrix, logo[0][1]); - }else{ - matrix_write(matrix, logo[1][0]); - matrix_write_P(matrix, PSTR("\n")); - matrix_write(matrix, logo[1][1]); + static const char PROGMEM mode_logo[4][4] = { + {0x95,0x96,0x0a,0}, + {0xb5,0xb6,0x0a,0}, + {0x97,0x98,0x0a,0}, + {0xb7,0xb8,0x0a,0} }; + + if (keymap_config.swap_lalt_lgui != false) { + oled_write_P(mode_logo[0], false); + oled_write_P(mode_logo[1], false); + } else { + oled_write_P(mode_logo[2], false); + oled_write_P(mode_logo[3], false); } // Define layers here, Have not worked out how to have text displayed for each layer. Copy down the number you see and add a case for it below - char buf[40]; - snprintf(buf,sizeof(buf), "Undef-%ld", layer_state); - matrix_write_P(matrix, PSTR("\nLayer: ")); - switch (layer_state) { - case L_BASE: - matrix_write_P(matrix, PSTR("Default")); - break; - case L_FN: - matrix_write_P(matrix, PSTR("FN")); - break; - case L_ADJ: - case L_ADJ_TRI: - matrix_write_P(matrix, PSTR("ADJ")); - break; - default: - matrix_write(matrix, buf); - } + oled_write_P(PSTR("Layer: "), false); + switch (layer_state) { + case L_BASE: + oled_write_P(PSTR("Default\n"), false); + break; + case L_FN: + oled_write_P(PSTR("FN \n"), false); + break; + case L_ADJ: + case L_ADJ_TRI: + oled_write_P(PSTR("ADJ \n"), false); + break; + default: + oled_write_P(PSTR("UNDEF \n"), false); + } // Host Keyboard LED Status - char led[40]; - snprintf(led, sizeof(led), "\n%s %s %s", - (host_keyboard_leds() & (1<. // #define MASTER_RIGHT // #define EE_HANDS -// Helix keyboard OLED support -// see ./rules.mk: OLED_ENABLE=yes or no -#ifdef OLED_ENABLE - #define SSD1306OLED -#endif - /* Select rows configuration */ // Rows are 4 or 5 // #define HELIX_ROWS 5 see ./rules.mk diff --git a/keyboards/sol/rev1/rev1.c b/keyboards/sol/rev1/rev1.c index 9d869a4af42..049b5c21869 100644 --- a/keyboards/sol/rev1/rev1.c +++ b/keyboards/sol/rev1/rev1.c @@ -1,12 +1,5 @@ #include "sol.h" -#ifdef SSD1306OLED -void led_set_kb(uint8_t usb_led) { - // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here - //led_set_user(usb_led); -} -#endif - #ifdef RGB_MATRIX_ENABLE const rgb_led g_rgb_leds[DRIVER_LED_TOTAL] = { // Left Hand Mapped Left to Right diff --git a/keyboards/sol/rev1/split_util.h b/keyboards/sol/rev1/split_util.h index 59b36241529..4421638969b 100644 --- a/keyboards/sol/rev1/split_util.h +++ b/keyboards/sol/rev1/split_util.h @@ -12,6 +12,4 @@ void matrix_slave_scan(void); void split_keyboard_setup(void); bool has_usb(void); -void matrix_master_OLED_init (void); - #endif diff --git a/keyboards/sol/rules.mk b/keyboards/sol/rules.mk index aa18721b6ce..bafdd9c52da 100644 --- a/keyboards/sol/rules.mk +++ b/keyboards/sol/rules.mk @@ -1,6 +1,4 @@ -SRC += i2c.c \ - serial.c \ - common/ssd1306.c +SRC += serial.c # MCU name #MCU = at90usb1287 @@ -47,6 +45,9 @@ BOOTLOADER = qmk-dfu # Interrupt driven control endpoint task(+60) OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT +# Custom local font file +OPT_DEFS += -DOLED_FONT_H=\"common/glcdfont.c\" + # Build Options # change to "no" to disable the options, or define them in the Makefile in # the appropriate keymap folder that will get included automatically diff --git a/quantum/quantum.c b/quantum/quantum.c index a64878c7297..9aa498dadb9 100644 --- a/quantum/quantum.c +++ b/quantum/quantum.c @@ -275,6 +275,12 @@ bool process_record_quantum(keyrecord_t *record) { preprocess_tap_dance(keycode, record); #endif + #if defined(OLED_DRIVER_ENABLE) && !defined(OLED_DISABLE_TIMEOUT) + // Wake up oled if user is using those fabulous keys! + if (record->event.pressed) + oled_on(); + #endif + if (!( #if defined(KEY_LOCK_ENABLE) // Must run first to be able to mask key_up events. @@ -1087,6 +1093,9 @@ void matrix_init_quantum() { #ifdef OUTPUT_AUTO_ENABLE set_output(OUTPUT_AUTO); #endif + #ifdef OLED_DRIVER_ENABLE + oled_init(OLED_ROTATION_0); + #endif matrix_init_kb(); } @@ -1123,6 +1132,10 @@ void matrix_scan_quantum() { haptic_task(); #endif + #ifdef OLED_DRIVER_ENABLE + oled_task(); + #endif + matrix_scan_kb(); } #if defined(BACKLIGHT_ENABLE) && defined(BACKLIGHT_PIN) diff --git a/quantum/quantum.h b/quantum/quantum.h index e2f467125ee..987516dedbd 100644 --- a/quantum/quantum.h +++ b/quantum/quantum.h @@ -139,6 +139,10 @@ extern uint32_t default_layer_state; #include "haptic.h" #endif +#ifdef OLED_DRIVER_ENABLE + #include "oled_driver.h" +#endif + //Function substitutions to ease GPIO manipulation #ifdef __AVR__ #define PIN_ADDRESS(p, offset) _SFR_IO8(ADDRESS_BASE + (p >> PORT_SHIFTER) + offset) From dd3a813f871b911012da55a499955307c309a7a5 Mon Sep 17 00:00:00 2001 From: Ryan Caltabiano Date: Tue, 16 Apr 2019 18:36:55 -0500 Subject: [PATCH 153/171] Reducing size of data send in one frame & update Zen rev2 oled usage --- docs/feature_oled_driver.md | 42 ++++++++++++++------ drivers/oled/oled_driver.c | 7 +++- drivers/oled/oled_driver.h | 43 +++++++++++++-------- keyboards/sol/keymaps/brianweyer/keymap.c | 2 +- keyboards/sol/keymaps/danielhklein/keymap.c | 2 +- keyboards/sol/keymaps/default/keymap.c | 2 +- keyboards/zen/rev2/config.h | 13 ------- keyboards/zen/rev2/rev2.c | 8 ++-- keyboards/zen/rev2/rules.mk | 7 +--- 9 files changed, 69 insertions(+), 57 deletions(-) diff --git a/docs/feature_oled_driver.md b/docs/feature_oled_driver.md index f261bbef18e..7011f145716 100644 --- a/docs/feature_oled_driver.md +++ b/docs/feature_oled_driver.md @@ -56,7 +56,7 @@ In split keyboards, it is very common to have two OLED displays that each render ```C++ #ifdef OLED_DRIVER_ENABLE -uint8_t oled_init_user(uint8_t rotation) { +oled_rotation_t oled_init_user(oled_rotation_t rotation) { if (!is_keyboard_master()) return OLED_ROTATION_180; // flips the display 180 degrees if offhand return rotation; @@ -99,18 +99,28 @@ void oled_task_user(void) { |`OLED_DISPLAY_WIDTH` |`128` |The width of the OLED display. | |`OLED_DISPLAY_HEIGHT` |`32` |The height of the OLED display. | |`OLED_MATRIX_SIZE` |`512` |The local buffer size to allocate.
`(OLED_DISPLAY_HEIGHT / 8 * OLED_DISPLAY_WIDTH)`| -|`OLED_BLOCK_TYPE` |`uint8_t` |The unsigned integer type to use for dirty rendering.| -|`OLED_BLOCK_COUNT` |`8` |The number of blocks the display is divided into for dirty rendering.
`(sizeof(OLED_BLOCK_TYPE) * 8)`| -|`OLED_BLOCK_SIZE` |`64` |The size of each block for dirty rendering
`(OLED_MATRIX_SIZE / OLED_BLOCK_COUNT)`| +|`OLED_BLOCK_TYPE` |`uint16_t` |The unsigned integer type to use for dirty rendering.| +|`OLED_BLOCK_COUNT` |`16` |The number of blocks the display is divided into for dirty rendering.
`(sizeof(OLED_BLOCK_TYPE) * 8)`| +|`OLED_BLOCK_SIZE` |`32` |The size of each block for dirty rendering
`(OLED_MATRIX_SIZE / OLED_BLOCK_COUNT)`| |`OLED_SOURCE_MAP` |`{ 0, ... N }` |Precalculated source array to use for mapping source buffer to target OLED memory in 90 degree rendering. | -|`OLED_TARGET_MAP` |`{ 48, ... N }`|Precalculated target array to use for mapping source buffer to target OLED memory in 90 degree rendering. | +|`OLED_TARGET_MAP` |`{ 24, ... N }`|Precalculated target array to use for mapping source buffer to target OLED memory in 90 degree rendering. | ### 90 Degree Rotation - Technical Mumbo Jumbo +```C +// OLED Rotation enum values are flags +typedef enum { + OLED_ROTATION_0 = 0, + OLED_ROTATION_90 = 1, + OLED_ROTATION_180 = 2, + OLED_ROTATION_270 = 3, // OLED_ROTATION_90 | OLED_ROTATION_180 +} oled_rotation_t; +``` + OLED displays driven by SSD1306 drivers only natively support in hard ware 0 degree and 180 degree rendering. This feature is done in software and not free. Using this feature will increase the time to calculate what data to send over i2c to the OLED. If you are strapped for cycles, this can cause keycodes to not register. In testing however, the rendering time on an `atmega32u4` board only went from 2ms to 5ms and keycodes not registering was only noticed once we hit 15ms. - 90 Degree Rotated Rendering is achieved by using bitwise operations to rotate each 8 block of memory and uses two precalculated arrays to remap buffer memory to OLED memory. The memory map defines are precalculated for remap performance and are calculated based on the OLED Height, Width, and Block Size. For example, in the default 128x32 implementation we have a 64 byte block size. This gives us eight 8 byte blocks that need to be rotated and rendered. The OLED renders horizontally two 8 byte blocks before moving down a page, e.g: + 90 Degree Rotated Rendering is achieved by using bitwise operations to rotate each 8 block of memory and uses two precalculated arrays to remap buffer memory to OLED memory. The memory map defines are precalculated for remap performance and are calculated based on the OLED Height, Width, and Block Size. For example, in the 128x32 implementation with a `uint8_t` block type, we have a 64 byte block size. This gives us eight 8 byte blocks that need to be rotated and rendered. The OLED renders horizontally two 8 byte blocks before moving down a page, e.g: | | | | | | | |---|---|---|---|---|---| @@ -133,14 +143,22 @@ So those precalculated arrays just index the memory offsets in the order in whic ## OLED API ```C++ -// Initialize the OLED display, rotating the rendered output 180 degrees if true. +// OLED Rotation enum values are flags +typedef enum { + OLED_ROTATION_0 = 0, + OLED_ROTATION_90 = 1, + OLED_ROTATION_180 = 2, + OLED_ROTATION_270 = 3, // OLED_ROTATION_90 | OLED_ROTATION_180 +} oled_rotation_t; + +// Initialize the OLED display, rotating the rendered output based on the define passed in. // Returns true if the OLED was initialized successfully -bool oled_init(bool flip180); +bool oled_init(oled_rotation_t rotation); // Called at the start of oled_init, weak function overridable by the user -// flip180 - the value passed into oled_init -// Return true if you want the oled to be flip180 -bool oled_init_user(bool flip180); +// rotation - the value passed into oled_init +// Return new oled_rotation_t if you want to override default rotation +oled_rotation_t oled_init_user(oled_rotation_t rotation); // Clears the display buffer, resets cursor position to 0, and sets the buffer to dirty for rendering void oled_clear(void); @@ -217,7 +235,7 @@ bool oled_scroll_off(void); // Returns the maximum number of characters that will fit on a line uint8_t oled_max_chars(void); -// Returns the maximum number of lines that will fit on the oled +// Returns the maximum number of lines that will fit on the OLED uint8_t oled_max_lines(void); ``` diff --git a/drivers/oled/oled_driver.c b/drivers/oled/oled_driver.c index aa025d7a4cc..96ea58ccb2c 100644 --- a/drivers/oled/oled_driver.c +++ b/drivers/oled/oled_driver.c @@ -203,7 +203,7 @@ bool oled_init(uint8_t rotation) { } __attribute__((weak)) -uint8_t oled_init_user(uint8_t rotation) { +oled_rotation_t oled_init_user(oled_rotation_t rotation) { return rotation; } @@ -384,7 +384,10 @@ void oled_write_char(const char data, bool invert) { // Dirty check if (memcmp(&oled_temp_buffer, oled_cursor, OLED_FONT_WIDTH)) { - oled_dirty |= (1 << ((oled_cursor - &oled_buffer[0]) / OLED_BLOCK_SIZE)); + uint16_t index = oled_cursor - &oled_buffer[0]; + oled_dirty |= (1 << (index / OLED_BLOCK_SIZE)); + // Edgecase check if the written data spans the 2 chunks + oled_dirty |= (1 << ((index + OLED_FONT_WIDTH) / OLED_BLOCK_SIZE)); } // Finally move to the next char diff --git a/drivers/oled/oled_driver.h b/drivers/oled/oled_driver.h index 1ca31df114b..ec07f1d9b84 100644 --- a/drivers/oled/oled_driver.h +++ b/drivers/oled/oled_driver.h @@ -27,14 +27,17 @@ along with this program. If not, see . #define OLED_DISPLAY_WIDTH 128 #define OLED_DISPLAY_HEIGHT 64 #define OLED_MATRIX_SIZE (OLED_DISPLAY_HEIGHT / 8 * OLED_DISPLAY_WIDTH) // 1024 (compile time mathed) - #define OLED_BLOCK_TYPE uint16_t - #define OLED_BLOCK_COUNT (sizeof(OLED_BLOCK_TYPE) * 8) // 16 (compile time mathed) - #define OLED_BLOCK_SIZE (OLED_MATRIX_SIZE / OLED_BLOCK_COUNT) // 64 (compile time mathed) + #define OLED_BLOCK_TYPE uint32_t + #define OLED_BLOCK_COUNT (sizeof(OLED_BLOCK_TYPE) * 8) // 32 (compile time mathed) + #define OLED_BLOCK_SIZE (OLED_MATRIX_SIZE / OLED_BLOCK_COUNT) // 32 (compile time mathed) // For 90 degree rotation, we map our internal matrix to oled matrix using fixed arrays // The OLED writes to it's memory horizontally, starting top left, but our memory starts bottom left in this mode - #define OLED_SOURCE_MAP { 0, 8, 16, 24, 32, 40, 48, 56 } - #define OLED_TARGET_MAP { 56, 48, 40, 32, 24, 16, 8, 0 } + #define OLED_SOURCE_MAP { 32, 40, 48, 56 } + #define OLED_TARGET_MAP { 24, 16, 8, 0 } + // If OLED_BLOCK_TYPE is uint16_t, these tables would look like: + // #define OLED_SOURCE_MAP { 0, 8, 16, 24, 32, 40, 48, 56 } + // #define OLED_TARGET_MAP { 56, 48, 40, 32, 24, 16, 8, 0 } // If OLED_BLOCK_TYPE is uint8_t, these tables would look like: // #define OLED_SOURCE_MAP { 0, 8, 16, 24, 32, 40, 48, 56, 64, 72, 80, 88, 96, 104, 112, 120 } // #define OLED_TARGET_MAP { 56, 120, 48, 112, 40, 104, 32, 96, 24, 88, 16, 80, 8, 72, 0, 64 } @@ -43,14 +46,17 @@ along with this program. If not, see . #define OLED_DISPLAY_WIDTH 128 #define OLED_DISPLAY_HEIGHT 32 #define OLED_MATRIX_SIZE (OLED_DISPLAY_HEIGHT / 8 * OLED_DISPLAY_WIDTH) // 512 (compile time mathed) - #define OLED_BLOCK_TYPE uint8_t // Type to use for segmenting the oled display for smart rendering, use unsigned types only - #define OLED_BLOCK_COUNT (sizeof(OLED_BLOCK_TYPE) * 8) // 8 (compile time mathed) - #define OLED_BLOCK_SIZE (OLED_MATRIX_SIZE / OLED_BLOCK_COUNT) // 128 (compile time mathed) + #define OLED_BLOCK_TYPE uint16_t // Type to use for segmenting the oled display for smart rendering, use unsigned types only + #define OLED_BLOCK_COUNT (sizeof(OLED_BLOCK_TYPE) * 8) // 16 (compile time mathed) + #define OLED_BLOCK_SIZE (OLED_MATRIX_SIZE / OLED_BLOCK_COUNT) // 32 (compile time mathed) // For 90 degree rotation, we map our internal matrix to oled matrix using fixed arrays // The OLED writes to it's memory horizontally, starting top left, but our memory starts bottom left in this mode - #define OLED_SOURCE_MAP { 0, 8, 16, 24, 32, 40, 48, 56 } - #define OLED_TARGET_MAP { 48, 32, 16, 0, 56, 40, 24, 8 } + #define OLED_SOURCE_MAP { 0, 8, 16, 24 } + #define OLED_TARGET_MAP { 24, 16, 8, 0 } + // If OLED_BLOCK_TYPE is uint8_t, these tables would look like: + // #define OLED_SOURCE_MAP { 0, 8, 16, 24, 32, 40, 48, 56 } + // #define OLED_TARGET_MAP { 48, 32, 16, 0, 56, 40, 24, 8 } #endif // defined(OLED_DISPLAY_CUSTOM) // Address to use for tthe i2d oled communication @@ -79,19 +85,22 @@ along with this program. If not, see . #define OLED_FONT_HEIGHT 8 #endif -#define OLED_ROTATION_0 0x00 -#define OLED_ROTATION_90 0x01 -#define OLED_ROTATION_180 0x02 -#define OLED_ROTATION_270 0x03 +// OLED Rotation enum values are flags +typedef enum { + OLED_ROTATION_0 = 0, + OLED_ROTATION_90 = 1, + OLED_ROTATION_180 = 2, + OLED_ROTATION_270 = 3, // OLED_ROTATION_90 | OLED_ROTATION_180 +} oled_rotation_t; // Initialize the oled display, rotating the rendered output based on the define passed in. // Returns true if the OLED was initialized successfully -bool oled_init(uint8_t rotation); +bool oled_init(oled_rotation_t rotation); // Called at the start of oled_init, weak function overridable by the user // rotation - the value passed into oled_init -// Return new uint8_t if you want to override default rotation -uint8_t oled_init_user(uint8_t rotation); +// Return new oled_rotation_t if you want to override default rotation +oled_rotation_t oled_init_user(oled_rotation_t rotation); // Clears the display buffer, resets cursor position to 0, and sets the buffer to dirty for rendering void oled_clear(void); diff --git a/keyboards/sol/keymaps/brianweyer/keymap.c b/keyboards/sol/keymaps/brianweyer/keymap.c index 9fd6ad6153d..87d603d8178 100755 --- a/keyboards/sol/keymaps/brianweyer/keymap.c +++ b/keyboards/sol/keymaps/brianweyer/keymap.c @@ -181,7 +181,7 @@ void matrix_init_user(void) { // OLED Driver Logic #ifdef OLED_DRIVER_ENABLE -uint8_t oled_init_user(uint8_t rotation) { +oled_rotation_t oled_init_user(oled_rotation_t rotation) { if (!has_usb()) return OLED_ROTATION_180; // flip 180 for offhand return rotation; diff --git a/keyboards/sol/keymaps/danielhklein/keymap.c b/keyboards/sol/keymaps/danielhklein/keymap.c index cfc295323fc..9bcc5761af1 100644 --- a/keyboards/sol/keymaps/danielhklein/keymap.c +++ b/keyboards/sol/keymaps/danielhklein/keymap.c @@ -246,7 +246,7 @@ void matrix_init_user(void) { // OLED Driver Logic #ifdef OLED_DRIVER_ENABLE -uint8_t oled_init_user(uint8_t rotation) { +oled_rotation_t oled_init_user(oled_rotation_t rotation) { if (!has_usb()) return OLED_ROTATION_180; // flip 180 for offhand return rotation; diff --git a/keyboards/sol/keymaps/default/keymap.c b/keyboards/sol/keymaps/default/keymap.c index 1742fc597cb..a40bc40b732 100644 --- a/keyboards/sol/keymaps/default/keymap.c +++ b/keyboards/sol/keymaps/default/keymap.c @@ -254,7 +254,7 @@ void matrix_init_user(void) { // OLED Driver Logic #ifdef OLED_DRIVER_ENABLE -uint8_t oled_init_user(uint8_t rotation) { +oled_rotation_t oled_init_user(oled_rotation_t rotation) { if (!has_usb()) return OLED_ROTATION_180; // flip 180 for offhand return rotation; diff --git a/keyboards/zen/rev2/config.h b/keyboards/zen/rev2/config.h index dc37472f6b9..5fa26276025 100644 --- a/keyboards/zen/rev2/config.h +++ b/keyboards/zen/rev2/config.h @@ -66,19 +66,6 @@ along with this program. If not, see . /* ws2812 RGB LED */ #define RGBLED_NUM 34 // Number of LEDs -// If using 90 Degree rotation, increase block cout -#ifdef OLED_ROTATE90 - #define OLED_DISPLAY_CUSTOM - #define OLED_DISPLAY_WIDTH 128 - #define OLED_DISPLAY_HEIGHT 32 - #define OLED_MATRIX_SIZE (OLED_DISPLAY_HEIGHT / 8 * OLED_DISPLAY_WIDTH) // 512 (compile time mathed) - #define OLED_BLOCK_TYPE uint16_t // Type to use for segmenting the oled display for smart rendering, use unsigned types only - #define OLED_BLOCK_COUNT (sizeof(OLED_BLOCK_TYPE) * 8) // 8 (compile time mathed) - #define OLED_BLOCK_SIZE (OLED_MATRIX_SIZE / OLED_BLOCK_COUNT) // 32 (compile time mathed) - #define OLED_SOURCE_MAP { 0, 8, 16, 24 } - #define OLED_TARGET_MAP { 24, 16, 8, 0 } -#endif - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/zen/rev2/rev2.c b/keyboards/zen/rev2/rev2.c index 4104460db1a..7bd8efbdd07 100644 --- a/keyboards/zen/rev2/rev2.c +++ b/keyboards/zen/rev2/rev2.c @@ -47,11 +47,11 @@ void render_status(void) { oled_write_P(led_usb_state & (1< Date: Fri, 19 Apr 2019 16:44:09 -0500 Subject: [PATCH 154/171] Fixing readme from feedback --- docs/feature_oled_driver.md | 22 ++++++++++++++++------ 1 file changed, 16 insertions(+), 6 deletions(-) diff --git a/docs/feature_oled_driver.md b/docs/feature_oled_driver.md index 7011f145716..fcc19515a94 100644 --- a/docs/feature_oled_driver.md +++ b/docs/feature_oled_driver.md @@ -11,10 +11,6 @@ To enable the OLED feature, there are three steps. First, when compiling your keyboard, you'll need to set `OLED_DRIVER_ENABLE=yes` in `rules.mk`, e.g.: ``` -BOOTMAGIC_ENABLE = no -MOUSEKEY_ENABLE = no -STENO_ENABLE = no -EXTRAKEY_ENABLE = yes OLED_DRIVER_ENABLE = yes ``` @@ -36,8 +32,8 @@ void oled_task_user(void) { oled_write_P(PSTR("ADJ\n"), false); break; default: - // Or use the write_ln shortcut - oled_write_P(PSTR("Undefined\n"), false); + // Or use the write_ln shortcut over adding '\n' to the end of your string + oled_write_ln_P(PSTR("Undefined"), false); } // Host Keyboard LED Status @@ -49,6 +45,20 @@ void oled_task_user(void) { #endif ``` +## Logo Example + +In the default font, ranges in the font file are reserved for a QMK Logo. To Render this logo to the oled screen, use the following code example: + +```C++ +static void render_logo(void) { + static const char PROGMEM qmk_logo[] = { + 0x80,0x81,0x82,0x83,0x84,0x85,0x86,0x87,0x88,0x89,0x8a,0x8b,0x8c,0x8d,0x8e,0x8f,0x90,0x91,0x92,0x93,0x94, + 0xa0,0xa1,0xa2,0xa3,0xa4,0xa5,0xa6,0xa7,0xa8,0xa9,0xaa,0xab,0xac,0xad,0xae,0xaf,0xb0,0xb1,0xb2,0xb3,0xb4, + 0xc0,0xc1,0xc2,0xc3,0xc4,0xc5,0xc6,0xc7,0xc8,0xc9,0xca,0xcb,0xcc,0xcd,0xce,0xcf,0xd0,0xd1,0xd2,0xd3,0xd4,0}; + + oled_write_P(qmk_logo, false); +} +``` ## Other Examples From d3268280ef7077ec1c800d30b8e98f1976192a14 Mon Sep 17 00:00:00 2001 From: Ryan Caltabiano Date: Fri, 19 Apr 2019 17:27:11 -0500 Subject: [PATCH 155/171] Removed / replaced questionable logos and added licenses file for safe logos --- drivers/oled/glcdfont.c | 24 ++++++++++----------- drivers/oled/licenses.txt | 45 +++++++++++++++++++++++++++++++++++++++ 2 files changed, 57 insertions(+), 12 deletions(-) create mode 100644 drivers/oled/licenses.txt diff --git a/drivers/oled/glcdfont.c b/drivers/oled/glcdfont.c index 150be9e9441..8b969057e53 100644 --- a/drivers/oled/glcdfont.c +++ b/drivers/oled/glcdfont.c @@ -162,16 +162,16 @@ static const unsigned char font[] PROGMEM = { 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0xE0, 0xF0, 0xF0, 0xF0, 0xE0, 0xEC, - 0xEE, 0xF7, 0xF3, 0x70, 0x20, 0x00, - 0x7C, 0x7C, 0x7C, 0x7E, 0x00, 0x7E, - 0x7E, 0x7E, 0x7F, 0x7F, 0x7F, 0x00, + 0x00, 0xC0, 0xF0, 0xF8, 0xFC, 0x3E, + 0x1E, 0x06, 0x01, 0x00, 0x00, 0x00, + 0x7F, 0x41, 0x41, 0x41, 0x7F, 0x00, + 0x7F, 0x41, 0x41, 0x41, 0x7F, 0x00, 0x00, 0x80, 0xC0, 0xE0, 0x7E, 0x5B, 0x4F, 0x5B, 0xFE, 0xC0, 0x00, 0x00, 0xC0, 0x00, 0xDC, 0xD7, 0xDE, 0xDE, 0xDE, 0xD7, 0xDC, 0x00, 0xC0, 0x00, - 0x00, 0x00, 0x00, 0xE0, 0xEC, 0xDF, - 0xFC, 0xE0, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x49, 0x49, 0x49, 0xFF, 0xFF, 0xFF, @@ -194,16 +194,16 @@ static const unsigned char font[] PROGMEM = { 0x03, 0x03, 0x00, 0x1E, 0x3F, 0x69, 0x69, 0x6F, 0x26, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x0F, 0x1F, 0x3F, 0x7F, 0x7F, 0x7F, - 0x7F, 0x7F, 0x3F, 0x1E, 0x0C, 0x00, - 0x1F, 0x1F, 0x1F, 0x3F, 0x00, 0x3F, - 0x3F, 0x3F, 0x7F, 0x7F, 0x7F, 0x00, + 0x00, 0x03, 0x0F, 0x1F, 0x3F, 0x3C, + 0x78, 0x70, 0x60, 0x00, 0x00, 0x00, + 0x7F, 0x41, 0x41, 0x41, 0x7F, 0x00, + 0x7F, 0x41, 0x41, 0x41, 0x7F, 0x00, 0x30, 0x7B, 0x7F, 0x78, 0x30, 0x20, 0x20, 0x30, 0x78, 0x7F, 0x3B, 0x00, 0x03, 0x00, 0x0F, 0x7F, 0x0F, 0x0F, 0x0F, 0x7F, 0x0F, 0x00, 0x03, 0x00, - 0x40, 0x7C, 0x3F, 0x3F, 0x23, 0x01, - 0x23, 0x3F, 0x37, 0x6C, 0x40, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0x01, 0x01, 0x07, 0x0F, 0x0F, diff --git a/drivers/oled/licenses.txt b/drivers/oled/licenses.txt new file mode 100644 index 00000000000..111603ebf3c --- /dev/null +++ b/drivers/oled/licenses.txt @@ -0,0 +1,45 @@ +The Android robot is reproduced or modified from work created and shared by Google and used according to terms described in the Creative Commons 3.0 Attribution License. + + +This is the Linux-penguin again... + +Originally drewn by Larry Ewing (http://www.isc.tamu.edu/~lewing/) +(with the GIMP) the Linux Logo has been vectorized by me (Simon Budig, +http://www.home.unix-ag.org/simon/). + +This happened quite some time ago with Corel Draw 4. But luckily +meanwhile there are tools available to handle vector graphics with +Linux. Bernhard Herzog (bernhard@users.sourceforge.net) deserves kudos +for creating Sketch (http://sketch.sourceforge.net), a powerful free +tool for creating vector graphics. He converted the Corel Draw file to +the Sketch native format. Since I am unable to maintain the Corel Draw +file any longer, the Sketch version now is the "official" one. + +Anja Gerwinski (anja@gerwinski.de) has created an alternate version of +the penguin (penguin-variant.sk) with a thinner mouth line and slightly +altered gradients. It also features a nifty drop shadow. + +The third bird (penguin-flat.sk) is a version reduced to three colors +(black/white/yellow) for e.g. silk screen printing. I made this version +for a mug, available at the friendly folks at +http://www.kernelconcepts.de/ - they do good stuff, mail Petra +(pinguin@kernelconcepts.de) if you need something special or don't +understand the german :-) + +These drawings are copyrighted by Larry Ewing and Simon Budig +(penguin-variant.sk also by Anja Gerwinski), redistribution is free but +has to include this README/Copyright notice. + +The use of these drawings is free. However I am happy about a sample of +your mug/t-shirt/whatever with this penguin on it... + +Have fun + Simon Budig + + +Simon.Budig@unix-ag.org +http://www.home.unix-ag.org/simon/ + +Simon Budig +Am Hardtkoeppel 2 +D-61279 Graevenwiesbach From ff9cd1dd0c2cc3be2a25b388eab183f6ff20b5b6 Mon Sep 17 00:00:00 2001 From: William Chang Date: Sat, 20 Apr 2019 17:38:33 -0700 Subject: [PATCH 156/171] Added keymap/userspace for dz60 build 4 with readme (#5668) * Initial commit * Modified keymap and updated readme. * fixed numbering in readme * Update README.md * Update README.md * Update README.md * Update README.md * Update README.md * Update README.md * Made requested changes in PR. * Rename README.md to readme.md --- .../dz60/keymaps/billiams/build_flash.sh | 9 +++ keyboards/dz60/keymaps/billiams/config.h | 1 + keyboards/dz60/keymaps/billiams/keymap.c | 48 ++++++++++++ keyboards/dz60/keymaps/billiams/readme.md | 73 +++++++++++++++++++ 4 files changed, 131 insertions(+) create mode 100644 keyboards/dz60/keymaps/billiams/build_flash.sh create mode 100644 keyboards/dz60/keymaps/billiams/config.h create mode 100644 keyboards/dz60/keymaps/billiams/keymap.c create mode 100644 keyboards/dz60/keymaps/billiams/readme.md diff --git a/keyboards/dz60/keymaps/billiams/build_flash.sh b/keyboards/dz60/keymaps/billiams/build_flash.sh new file mode 100644 index 00000000000..e7a81114415 --- /dev/null +++ b/keyboards/dz60/keymaps/billiams/build_flash.sh @@ -0,0 +1,9 @@ +# dfu-programmer atmega32u4 erase --force +# dfu-programmer atmega32u4 flash /path/to/firmware.hex +# dfu-programmer atmega32u4 reset + +# run this in the qmk_firmware directory +make dz60:billiams +dfu-programmer atmega32u4 erase --force && \ +dfu-programmer atmega32u4 flash dz60_billiams.hex && \ +dfu-programmer atmega32u4 reset \ No newline at end of file diff --git a/keyboards/dz60/keymaps/billiams/config.h b/keyboards/dz60/keymaps/billiams/config.h new file mode 100644 index 00000000000..9560d51a6f9 --- /dev/null +++ b/keyboards/dz60/keymaps/billiams/config.h @@ -0,0 +1 @@ +#define GRAVE_ESC_GUI_OVERRIDE # Always send Escape if GUI is pressed diff --git a/keyboards/dz60/keymaps/billiams/keymap.c b/keyboards/dz60/keymaps/billiams/keymap.c new file mode 100644 index 00000000000..88ce0f329ca --- /dev/null +++ b/keyboards/dz60/keymaps/billiams/keymap.c @@ -0,0 +1,48 @@ +#include QMK_KEYBOARD_H + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + + /* Qwerty + * ,-----------------------------------------------------------------------------------------. + * | ` | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | - | = | Bkspc | + * |-----------------------------------------------------------------------------------------+ + * | Tab | Q | W | E | R | T | Y | U | I | O | P | [ | ] | \ | + * |-----------------------------------------------------------------------------------------+ + * | Fn | A | S | D | F | G | H | J | K | L | ; | ' | Enter | + * |-----------------------------------------------------------------------------------------+ + * | Shift | Z | X | C | V | B | N | M | , | . |Tap(/) Shft| U | ESC | + * |-----------------------------------------------------------------------------------------+ + * | Ctrl | Alt | Cmd | Space | Cmd | Fn | L | D | R | + * `-----------------------------------------------------------------------------------------' + */ + + LAYOUT_directional( + KC_GRAVE, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, _______, KC_BSPC, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, + MO(1), KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, _______, RSFT_T(KC_SLSH) , KC_UP, KC_ESCAPE, + KC_LCTL, KC_LALT, KC_LGUI, KC_SPC, KC_SPC, KC_SPC, KC_RGUI, MO(1), KC_LEFT, KC_DOWN, KC_RIGHT + ), + + /* FN Layer + * ,-----------------------------------------------------------------------------------------. + * | | F1 | F2 | F3 | F4 | F5 | F6 | F7 | F8 | F9 | F10 | F11 | F12 | DEL | + * |-----------------------------------------------------------------------------------------+ + * | |RBB T|RGB M| Hue-| Hue+| Sat-| Sat+| Val-| Val+| | | MUTE | Vol- | Vol+ | + * |-----------------------------------------------------------------------------------------+ + * | | | | | | | | | | | Prev | Next | Play/Pause | + * |-----------------------------------------------------------------------------------------+ + * | | | | | | | | |Scr- |Scr+ | |PG_UP|RESET| + * |-----------------------------------------------------------------------------------------+ + * | | | | | | | HOME|PG_DN| END | + * `-----------------------------------------------------------------------------------------' + */ + + LAYOUT_directional( + _______, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, KC_DEL, + _______, RGB_TOG, RGB_MOD, RGB_HUD, RGB_HUI, RGB_SAD, RGB_SAI, RGB_VAD, RGB_VAI, _______, _______, KC_MUTE, KC__VOLDOWN, KC__VOLUP, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_MRWD, KC_MFFD, + KC_MPLY, _______, _______, _______, _______, _______, _______, _______, _______, KC_BRID, KC_BRIU, _______, _______, KC_PGUP, RESET, + _______, _______, _______, _______, _______, _______, _______, _______, KC_HOME, KC_PGDOWN, KC_END + ), +}; diff --git a/keyboards/dz60/keymaps/billiams/readme.md b/keyboards/dz60/keymaps/billiams/readme.md new file mode 100644 index 00000000000..5a3a7213f86 --- /dev/null +++ b/keyboards/dz60/keymaps/billiams/readme.md @@ -0,0 +1,73 @@ +## Billiam's DZ60 layout + +This layout is optimized for MacOS and is for a Build 4 DZ60 with a 2U left shift, 2U right shift and an arrow +cluster in the bottom right. Don't use this layout if you didn't get Build 4, you will enter a world of pain Donny. + +Settings: + +* The `CAPS LOCK` key is replaced with a second function key. +* The `ALT` and `CMD` keys are swapped to replicate the Mac layout. +* Del is available as `Fn` + `Backspace` +* `/ ?` are available when you tap the right shift. Otherwise RShift is shift when held down +* RESET is available as `Fn`+ ` ESC` +* Underglow toggle and mode selection are available as `Fn` + `Q` and `Fn` + `S`. Yes your keyboard has lights even if you didn't get the LEDs. Bonus! +* Media play/pause doesn't seem to work with anything but iTunes at the moment. FML + + +### Initial Installation + +I found the instructions to be longer than they had to be, and I ended up having to Google some steps anyway. These are the steps I took to get my keyboard setup, in case you are new to the process. + +1. Clone the qmk_firmware repo locally +``` +# Choose one: +git clone git@github.com:qmk/qmk_firmware.git # OR +git clone https://github.com/qmk/qmk_firmware.git +``` +2. Customize your layout by starting with a [keymap](https://github.com/qmk/qmk_firmware/tree/master/keyboards/dz60/keymaps). I copied [StephenGrier](https://github.com/qmk/qmk_firmware/tree/master/keyboards/dz60/keymaps/stephengrier)'s and modified it for DZ60 Build 4 and changed a few things, like the `grave` key, `ESC` and `/`. + +3. Build your hex file +``` +make dz60:billiams # be in the qmk_firmware directory to do this +``` +A hex file `dz60_billiams.hex` will be created in the base qmk_firmware directory + +4. Before plugging in your keyboard into your computer, hold `SPACE` and `B` keys down +5. Holding those keys down, plug the keyboard into your computer, which will put the keyboard in bootlegger mode +6. If you are using [QMK toolbox](https://github.com/qmk/qmk_toolbox/releases), upload the .hex file you made above, select it and hit the flash button. For the love of all that is good and holy on Earth, don't hit the load button, that will load the default keymap and that's not what you want! Unless it is, in which case click away. + +Note: If you didn't follow my instructions in 4 and accidentally loaded the default keymap, then to `RESET` the keyboard and kick it into bootleg mode again, hold the `down arrow` key and `\`. The default layout is Build 1 and sets the `MENU` key on that build to `Fn`. `MENU` corresponds to `down arrow` in build 4. Note that you don't have to unplug the keyboard. + +Hope this helps! + +### 0 Qwerty +``` +,-----------------------------------------------------------------------------------------. +| ` | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | - | = | Bkspc | +|-----------------------------------------------------------------------------------------+ +| Tab | Q | W | E | R | T | Y | U | I | O | P | [ | ] | \ | +|-----------------------------------------------------------------------------------------+ +| Fn | A | S | D | F | G | H | J | K | L | ; | ' | Enter | +|-----------------------------------------------------------------------------------------+ +| Shift | Z | X | C | V | B | N | M | , | . | Tap:/ RSh | U | ESC | +|-----------------------------------------------------------------------------------------+ +| Ctrl | Alt | Cmd | Space | Cmd | Fn | L | D | R | +`-----------------------------------------------------------------------------------------' +``` + +### 1 Fn Layer +``` +FN Layer +,-----------------------------------------------------------------------------------------. +| ` | F1 | F2 | F3 | F4 | F5 | F6 | F7 | F8 | F9 | F10 | F11 | F12 | DEL | +|-----------------------------------------------------------------------------------------+ +| |RBB T|RGB M| Hue-| Hue+| Sat-| Sat+| Val-| Val+| | | MUTE | Vol- | Vol+ | +|-----------------------------------------------------------------------------------------+ +| | | | | | | | | | | Prev | Next | Play/Pause | +|-----------------------------------------------------------------------------------------+ +| | | | | | | | |Scr- |Scr+ | | PG_UP |RESET| +|-----------------------------------------------------------------------------------------+ +| | | | | | | HOME | PG_DN | END | +`-----------------------------------------------------------------------------------------' +``` + From 829ccd3491ca43be79e110b12bdabe96d6e76b0f Mon Sep 17 00:00:00 2001 From: XScorpion2 Date: Sat, 20 Apr 2019 20:21:22 -0500 Subject: [PATCH 157/171] RGB Matrix docs update from mechmerlin discussion (#5667) * RGB Matrix docs update from mechmerlin discussion * alignment * Apply suggestions from code review Co-Authored-By: XScorpion2 --- docs/feature_rgb_matrix.md | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/docs/feature_rgb_matrix.md b/docs/feature_rgb_matrix.md index 05c1ebba815..acef4717dde 100644 --- a/docs/feature_rgb_matrix.md +++ b/docs/feature_rgb_matrix.md @@ -124,7 +124,7 @@ Configure the hardware via your `config.h`: --- -From this point forward the configuration is the same for all the drivers. +From this point forward the configuration is the same for all the drivers. The struct rgb_led array tells the system for each led, what key electrical matrix it represents, what the physical position is on the board, and if the led is for a modifier key or not. Here is a brief example: ```C const rgb_led g_rgb_leds[DRIVER_LED_TOTAL] = { @@ -138,14 +138,14 @@ const rgb_led g_rgb_leds[DRIVER_LED_TOTAL] = { } ``` -The format for the matrix position used in this array is `{row | (col << 4)}`. The `x` is between (inclusive) 0-224, and `y` is between (inclusive) 0-64. The easiest way to calculate these positions is: +The first part, `{row | col << 4}`, tells the system what key this LED represents by using the key's electrical matrix row & col. The second part, `{x=0..224, y=0..64}` represents the LED's physical position on the keyboard. The `x` is between (inclusive) 0-224, and `y` is between (inclusive) 0-64 as the effects are based on this range. The easiest way to calculate these positions is imagine your keyboard is a grid, and the top left of the keyboard represents x, y coordinate 0, 0 and the bottom right of your keyboard represents 224, 64. Using this as a basis, you can use the following formula to calculate the physical position: ```C -x = 224 / ( NUMBER_OF_COLS - 1 ) * ROW_POSITION -y = 64 / (NUMBER_OF_ROWS - 1 ) * COL_POSITION +x = 224 / (NUMBER_OF_COLS - 1) * COL_POSITION +y = 64 / (NUMBER_OF_ROWS - 1) * ROW_POSITION ``` -Where all variables are decimels/floats. +Where NUMBER_OF_COLS, NUMBER_OF_ROWS, COL_POSITION, & ROW_POSITION are all based on the physical layout of your keyboard, not the electrical layout. `modifier` is a boolean, whether or not a certain key is considered a modifier (used in some effects). From b27ddf1edbc5baa317507d7c91054abd2e14de8a Mon Sep 17 00:00:00 2001 From: XScorpion2 Date: Sun, 21 Apr 2019 11:13:44 -0500 Subject: [PATCH 158/171] [Keyboard] Updated rules.mk for Sol to use the correct feature flag (#5672) --- keyboards/sol/keymaps/default/rules.mk | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/keyboards/sol/keymaps/default/rules.mk b/keyboards/sol/keymaps/default/rules.mk index 40167b37557..526b72fe7f3 100644 --- a/keyboards/sol/keymaps/default/rules.mk +++ b/keyboards/sol/keymaps/default/rules.mk @@ -19,7 +19,7 @@ UNICODE_ENABLE = no # Unicode SWAP_HANDS_ENABLE = no # Enable one-hand typing ENCODER_ENABLE_CUSTOM = yes # Enable rotary encoder (+90) -OLED_ENABLE = no # OLED_ENABLE (+5000) +OLED_DRIVER_ENABLE = no # Enable the OLED Driver (+5000) IOS_DEVICE_ENABLE = no # Limit max brightness to connect to IOS device (iPad,iPhone) # Do not edit past here From e2843c25ceb35ab8c1e22ec16605ee6a854b59d9 Mon Sep 17 00:00:00 2001 From: Rys Sommefeldt Date: Sun, 21 Apr 2019 17:15:19 +0100 Subject: [PATCH 159/171] [Keymap] Shuffle FL1 some more to match keycap legends (#5673) --- keyboards/tada68/keymaps/mattgemmell/keymap.c | 12 ++++++------ keyboards/tada68/keymaps/mattgemmell/readme.md | 7 +++---- 2 files changed, 9 insertions(+), 10 deletions(-) diff --git a/keyboards/tada68/keymaps/mattgemmell/keymap.c b/keyboards/tada68/keymaps/mattgemmell/keymap.c index 1a8021ea402..f2afd3cd48d 100644 --- a/keyboards/tada68/keymaps/mattgemmell/keymap.c +++ b/keyboards/tada68/keymaps/mattgemmell/keymap.c @@ -29,20 +29,20 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { * ,----------------------------------------------------------------. * | | F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12| |BR↑ | * |----------------------------------------------------------------| - * | | | | | | | | | | | | | | |BR↓ | + * | | | | | | | | |Prn|Scl|Pau|Up | | |BR↓ | * |------------------------------------------------------- -----| - * | | | | | | | | | | | | | | |Home| + * | | V+| V-|Mut| | | | |Hom|PgU|Lft|Rig| | |Home| * |----------------------------------------------------------------| - * | | | | | L+|LED| L-| | | V↓| V↑|Mut| | ↑ | End| + * | | | | | L+|LED| L-| | |End|PgDn|Dow| | ↑ | End| * |----------------------------------------------------------------| * | | | | | | | | ← | ↓ | → | * `----------------------------------------------------------------' */ [_FL] = LAYOUT_iso( _______, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, KC_BRMU, \ - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_BRMD, \ - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_HOME, \ - _______, _______, _______, _______, BL_DEC, BL_TOGG, BL_INC, _______, _______, KC_VOLD, KC_VOLU, KC_MUTE, _______, KC_MS_U, KC_END, \ + _______, _______, _______, _______, _______, _______, _______, _______, KC_PSCR, KC_SLCK, KC_PAUS, KC_UP, _______, KC_BRMD, \ + _______, KC_VOLU, KC_VOLD, KC_MUTE, _______, _______, _______, _______, KC_HOME, KC_PGUP, KC_LEFT, KC_RGHT, _______, _______, KC_HOME, \ + _______, _______, _______, _______, BL_DEC, BL_TOGG, BL_INC, _______, _______, KC_END, KC_PGDN, KC_DOWN, _______, KC_MS_U, KC_END, \ _______, _______, _______, _______, _______, _______, _______, KC_MS_L, KC_MS_D, KC_MS_R ), }; diff --git a/keyboards/tada68/keymaps/mattgemmell/readme.md b/keyboards/tada68/keymaps/mattgemmell/readme.md index a67e25ae27b..de8e0c4980a 100644 --- a/keyboards/tada68/keymaps/mattgemmell/readme.md +++ b/keyboards/tada68/keymaps/mattgemmell/readme.md @@ -1,9 +1,8 @@ -# Custom Tada68 layout for ISO UK with Apple-y tweaks +# Custom TADA68 layout for ISO UK with Apple-specific tweaks -This layout is based on the [ISO UK](../iso-uk) layout, with the following -changes: +This layout is based on the [ISO UK](../iso-uk) layout, with changes to make it +more user friendly when used on Apple devices, like iPads and the Mac. -Swap Win and Alt on the left side (Option and Command on macOS) ## Installation From 50e0bdab0012c96736f2a9fe7ef88802c6839e20 Mon Sep 17 00:00:00 2001 From: moyi4681 Date: Mon, 22 Apr 2019 00:33:36 +0800 Subject: [PATCH 160/171] [Keyboard] dz60rgb: update default keymap (#5661) * Update keymap.c * Update config.h * Update dz60rgb.c * Update keymap.c --- keyboards/dztech/dz60rgb/config.h | 2 +- keyboards/dztech/dz60rgb/dz60rgb.c | 113 ++---------------- .../dztech/dz60rgb/keymaps/default/keymap.c | 58 +++------ 3 files changed, 28 insertions(+), 145 deletions(-) diff --git a/keyboards/dztech/dz60rgb/config.h b/keyboards/dztech/dz60rgb/config.h index f43b39810f8..0c04acce3fd 100644 --- a/keyboards/dztech/dz60rgb/config.h +++ b/keyboards/dztech/dz60rgb/config.h @@ -22,7 +22,7 @@ #define DEBOUNCE 3 #define RGB_DISABLE_AFTER_TIMEOUT 0 // number of ticks to wait until disabling effects -#define RGB_DISABLE_WHEN_USB_SUSPENDED false // turn off effects when suspended +#define RGB_DISABLE_WHEN_USB_SUSPENDED true // turn off effects when suspended #define RGB_MATRIX_KEYPRESSES #define RGB_MATRIX_LED_PROCESS_LIMIT 4 #define RGB_MATRIX_LED_FLUSH_LIMIT 26 diff --git a/keyboards/dztech/dz60rgb/dz60rgb.c b/keyboards/dztech/dz60rgb/dz60rgb.c index 99e3b5646fa..a6825e750fd 100644 --- a/keyboards/dztech/dz60rgb/dz60rgb.c +++ b/keyboards/dztech/dz60rgb/dz60rgb.c @@ -1,14 +1,7 @@ #include "dz60rgb.h" #include "config.h" #if defined (dzrgb60_iso) - const is31_led g_is31_leds[DRIVER_LED_TOTAL] = { -/* Refer to IS31 manual for these locations - * driver - * | R location - * | | G location - * | | | B location - * | | | | */ {0, K_14, J_14, L_14}, {0, K_13, J_13, L_13}, {0, K_12, J_12, L_12}, @@ -23,7 +16,6 @@ const is31_led g_is31_leds[DRIVER_LED_TOTAL] = { {0, K_3, J_3, L_3}, {0, K_2, J_2, L_2}, {0, K_1, J_1, L_1}, - {0, H_15, G_15, I_15}, {0, H_13, G_13, I_13}, {0, H_12, G_12, I_12}, @@ -38,7 +30,6 @@ const is31_led g_is31_leds[DRIVER_LED_TOTAL] = { {0, H_3, G_3, I_3}, {0, H_2, G_2, I_2}, {0, H_1, G_1, I_1}, - {0, B_14, A_14, C_14}, {0, E_12, D_12, F_12}, {0, E_11, D_11, F_11}, @@ -52,7 +43,6 @@ const is31_led g_is31_leds[DRIVER_LED_TOTAL] = { {0, E_3, D_3, F_3}, {0, E_2, D_2, F_2}, {0, E_1, D_1, F_1}, - {0, B_13, A_13, C_13}, {0, B_11, A_11, C_11}, {0, B_10, A_10, C_10}, @@ -65,7 +55,6 @@ const is31_led g_is31_leds[DRIVER_LED_TOTAL] = { {0, B_3, A_3, C_3}, {0, B_2, A_2, C_2}, {0, B_1, A_1, C_1}, - {0, B_15, A_15, C_15}, {0, E_13, D_13, F_13}, {0, B_12, A_12, C_12}, @@ -73,9 +62,8 @@ const is31_led g_is31_leds[DRIVER_LED_TOTAL] = { {0, B_16, A_16, C_16}, {0, E_16, D_16, F_16}, {0, H_16, G_16, I_16}, - {0, K_16, J_16, L_16} + {0, K_16, J_16, L_16}, }; - const rgb_led g_rgb_leds[DRIVER_LED_TOTAL] = { {{0|(13<<4)}, {16*13.5, 0}, 1}, {{0|(12<<4)}, {16*12, 0}, 1}, @@ -91,7 +79,6 @@ const rgb_led g_rgb_leds[DRIVER_LED_TOTAL] = { {{0|(2<<4)}, {16*2, 0}, 1}, {{0|(1<<4)}, {16*1, 0}, 1}, {{0|(0<<4)}, {16*0, 0}, 1}, - {{2|(13<<4)}, {16*13.75, 24}, 1}, {{1|(12<<4)}, {16*12.5, 16}, 0}, {{1|(11<<4)}, {16*11.5, 16}, 0}, @@ -106,7 +93,6 @@ const rgb_led g_rgb_leds[DRIVER_LED_TOTAL] = { {{1|(2<<4)}, { 16*2.5, 16}, 0}, {{1|(1<<4)}, { 16*1.5, 16}, 0}, {{1|(0<<4)}, { 16*0.25, 16}, 1}, - {{1|(13<<4)}, {16*12.75, 32}, 1}, {{2|(11<<4)}, {16*11.75, 32}, 0}, {{2|(10<<4)}, {16*10.75, 32}, 0}, @@ -120,7 +106,6 @@ const rgb_led g_rgb_leds[DRIVER_LED_TOTAL] = { {{2|(2<<4)}, { 16*2.75, 32}, 0}, {{2|(1<<4)}, { 16*1.75, 32}, 0}, {{2|(0<<4)}, { 16*0.375, 32}, 1}, - {{3|(11<<4)}, {16*13.125, 48}, 1}, {{3|(10<<4)}, {16*11.25, 48}, 0}, {{3|(9<<4)}, {16*10.25, 48}, 0}, @@ -133,7 +118,6 @@ const rgb_led g_rgb_leds[DRIVER_LED_TOTAL] = { {{3|(2<<4)}, {16*3.25, 48}, 0}, {{3|(1<<4)}, {16*1.25, 48}, 0}, {{3|(0<<4)}, {16*0.625, 48}, 1}, - {{4|(13<<4)}, {16*13.875, 64}, 1}, {{4|(11<<4)}, {16*12.625, 64}, 1}, {{4|(10<<4)}, {16*11.375, 64}, 1}, @@ -141,21 +125,10 @@ const rgb_led g_rgb_leds[DRIVER_LED_TOTAL] = { {{4|(5<<4)}, { 16*6.375, 64}, 0}, {{4|(2<<4)}, { 16*2.625, 64}, 1}, {{4|(1<<4)}, { 16*1.375, 64}, 1}, - {{4|(0<<4)}, { 16*0.125, 64}, 1} - + {{4|(0<<4)}, { 16*0.125, 64}, 1}, }; - - - #elif defined (dzrgb60_hhkb) - const is31_led g_is31_leds[DRIVER_LED_TOTAL] = { -/* Refer to IS31 manual for these locations - * driver - * | R location - * | | G location - * | | | B location - * | | | | */ {0, H_15, G_15, I_15}, {0, K_14, J_14, L_14}, {0, K_13, J_13, L_13}, @@ -171,7 +144,6 @@ const is31_led g_is31_leds[DRIVER_LED_TOTAL] = { {0, K_3, J_3, L_3}, {0, K_2, J_2, L_2}, {0, K_1, J_1, L_1}, - {0, H_14, G_14, I_14}, {0, H_13, G_13, I_13}, {0, H_12, G_12, I_12}, @@ -186,7 +158,6 @@ const is31_led g_is31_leds[DRIVER_LED_TOTAL] = { {0, H_3, G_3, I_3}, {0, H_2, G_2, I_2}, {0, H_1, G_1, I_1}, - {0, E_14, D_14, F_14}, {0, E_12, D_12, F_12}, {0, E_11, D_11, F_11}, @@ -200,7 +171,6 @@ const is31_led g_is31_leds[DRIVER_LED_TOTAL] = { {0, E_3, D_3, F_3}, {0, E_2, D_2, F_2}, {0, E_1, D_1, F_1}, - {0, B_14, A_14, C_14}, {0, B_13, A_13, C_13}, {0, B_11, A_11, C_11}, @@ -214,16 +184,14 @@ const is31_led g_is31_leds[DRIVER_LED_TOTAL] = { {0, B_3, A_3, C_3}, {0, B_2, A_2, C_2}, {0, B_1, A_1, C_1}, - {0, B_15, A_15, C_15}, {0, E_13, D_13, F_13}, {0, B_12, A_12, C_12}, {0, B_16, A_16, C_16}, {0, E_16, D_16, F_16}, {0, H_16, G_16, I_16}, - {0, K_16, J_16, L_16} + {0, K_16, J_16, L_16}, }; - const rgb_led g_rgb_leds[DRIVER_LED_TOTAL] = { {{2|(12<<4)}, {16*14, 0}, 1}, {{0|(13<<4)}, {16*13, 0}, 1}, @@ -240,7 +208,6 @@ const rgb_led g_rgb_leds[DRIVER_LED_TOTAL] = { {{0|(2<<4)}, {16*2, 0}, 1}, {{0|(1<<4)}, {16*1, 0}, 1}, {{0|(0<<4)}, {16*0, 0}, 1}, - {{1|(13<<4)}, {16*13.75, 16}, 1}, {{1|(12<<4)}, {16*12.5, 16}, 0}, {{1|(11<<4)}, {16*11.5, 16}, 0}, @@ -255,7 +222,6 @@ const rgb_led g_rgb_leds[DRIVER_LED_TOTAL] = { {{1|(2<<4)}, { 16*2.5, 16}, 0}, {{1|(1<<4)}, { 16*1.5, 16}, 0}, {{1|(0<<4)}, { 16*0.25, 16}, 1}, - {{2|(13<<4)}, {16*12.75, 32}, 1}, {{2|(11<<4)}, {16*11.75, 32}, 0}, {{2|(10<<4)}, {16*10.75, 32}, 0}, @@ -269,7 +235,6 @@ const rgb_led g_rgb_leds[DRIVER_LED_TOTAL] = { {{2|(2<<4)}, { 16*2.75, 32}, 0}, {{2|(1<<4)}, { 16*1.75, 32}, 0}, {{2|(0<<4)}, { 16*0.375, 32}, 1}, - {{3|(13<<4)}, {16*14, 48}, 1}, {{3|(11<<4)}, {16*12.625, 48}, 0}, {{3|(10<<4)}, {16*11.25, 48}, 0}, @@ -283,24 +248,16 @@ const rgb_led g_rgb_leds[DRIVER_LED_TOTAL] = { {{3|(2<<4)}, {16*3.25, 48}, 0}, {{3|(1<<4)}, {16*1.25, 48}, 0}, {{3|(0<<4)}, {16*0.625, 48}, 1}, - {{4|(13<<4)}, {16*13.625, 64}, 1}, {{4|(11<<4)}, {16*12.375, 64}, 1}, {{4|(10<<4)}, {16*11.125, 64}, 1}, {{4|(5<<4)}, { 16*7, 64}, 0}, {{4|(2<<4)}, { 16*2.875, 64}, 1}, {{4|(1<<4)}, { 16*1.625, 64}, 1}, - {{4|(0<<4)}, { 16*0.375, 64}, 1} - + {{4|(0<<4)}, { 16*0.375, 64}, 1}, }; #elif defined (dzrgb60_hhkb_iso) const is31_led g_is31_leds[DRIVER_LED_TOTAL] = { -/* Refer to IS31 manual for these locations - * driver - * | R location - * | | G location - * | | | B location - * | | | | */ {0, H_15, G_15, I_15}, {0, K_14, J_14, L_14}, {0, K_13, J_13, L_13}, @@ -316,7 +273,6 @@ const is31_led g_is31_leds[DRIVER_LED_TOTAL] = { {0, K_3, J_3, L_3}, {0, K_2, J_2, L_2}, {0, K_1, J_1, L_1}, - {0, K_15, J_15, L_15}, {0, H_13, G_13, I_13}, {0, H_12, G_12, I_12}, @@ -331,7 +287,6 @@ const is31_led g_is31_leds[DRIVER_LED_TOTAL] = { {0, H_3, G_3, I_3}, {0, H_2, G_2, I_2}, {0, H_1, G_1, I_1}, - {0, E_15, D_15, F_15}, {0, E_12, D_12, F_12}, {0, E_11, D_11, F_11}, @@ -345,7 +300,6 @@ const is31_led g_is31_leds[DRIVER_LED_TOTAL] = { {0, E_3, D_3, F_3}, {0, E_2, D_2, F_2}, {0, E_1, D_1, F_1}, - {0, B_14, A_14, C_14}, {0, B_13, A_13, C_13}, {0, B_11, A_11, C_11}, @@ -359,16 +313,14 @@ const is31_led g_is31_leds[DRIVER_LED_TOTAL] = { {0, B_3, A_3, C_3}, {0, B_2, A_2, C_2}, {0, B_1, A_1, C_1}, - {0, B_15, A_15, C_15}, {0, E_13, D_13, F_13}, {0, B_12, A_12, C_12}, {0, B_16, A_16, C_16}, {0, E_16, D_16, F_16}, {0, H_16, G_16, I_16}, - {0, K_16, J_16, L_16} + {0, K_16, J_16, L_16}, }; - const rgb_led g_rgb_leds[DRIVER_LED_TOTAL] = { {{2|(12<<4)}, {16*14, 0}, 1}, {{0|(13<<4)}, {16*13, 0}, 1}, @@ -385,7 +337,6 @@ const rgb_led g_rgb_leds[DRIVER_LED_TOTAL] = { {{0|(2<<4)}, {16*2, 0}, 1}, {{0|(1<<4)}, {16*1, 0}, 1}, {{0|(0<<4)}, {16*0, 0}, 1}, - {{2|(13<<4)}, {16*13.75, 24}, 1}, {{1|(12<<4)}, {16*12.5, 16}, 0}, {{1|(11<<4)}, {16*11.5, 16}, 0}, @@ -400,7 +351,6 @@ const rgb_led g_rgb_leds[DRIVER_LED_TOTAL] = { {{1|(2<<4)}, { 16*2.5, 16}, 0}, {{1|(1<<4)}, { 16*1.5, 16}, 0}, {{1|(0<<4)}, { 16*0.25, 16}, 1}, - {{1|(13<<4)}, {16*12.75, 32}, 1}, {{2|(11<<4)}, {16*11.75, 32}, 0}, {{2|(10<<4)}, {16*10.75, 32}, 0}, @@ -414,7 +364,6 @@ const rgb_led g_rgb_leds[DRIVER_LED_TOTAL] = { {{2|(2<<4)}, { 16*2.75, 32}, 0}, {{2|(1<<4)}, { 16*1.75, 32}, 0}, {{2|(0<<4)}, { 16*0.375, 32}, 1}, - {{3|(13<<4)}, {16*14, 48}, 1}, {{3|(11<<4)}, {16*12.625, 48}, 0}, {{3|(10<<4)}, {16*11.25, 48}, 0}, @@ -428,24 +377,16 @@ const rgb_led g_rgb_leds[DRIVER_LED_TOTAL] = { {{3|(2<<4)}, {16*3.25, 48}, 0}, {{3|(1<<4)}, {16*1.25, 48}, 0}, {{3|(0<<4)}, {16*0.625, 48}, 1}, - {{4|(13<<4)}, {16*13.625, 64}, 1}, {{4|(11<<4)}, {16*12.375, 64}, 1}, {{4|(10<<4)}, {16*11.125, 64}, 1}, {{4|(5<<4)}, { 16*7, 64}, 0}, {{4|(2<<4)}, { 16*2.875, 64}, 1}, {{4|(1<<4)}, { 16*1.625, 64}, 1}, - {{4|(0<<4)}, { 16*0.375, 64}, 1} - + {{4|(0<<4)}, { 16*0.375, 64}, 1}, }; #elif defined (dzrgb60_ansi) const is31_led g_is31_leds[DRIVER_LED_TOTAL] = { -/* Refer to IS31 manual for these locations - * driver - * | R location - * | | G location - * | | | B location - * | | | | */ {0, K_14, J_14, L_14}, {0, K_13, J_13, L_13}, {0, K_12, J_12, L_12}, @@ -460,7 +401,6 @@ const is31_led g_is31_leds[DRIVER_LED_TOTAL] = { {0, K_3, J_3, L_3}, {0, K_2, J_2, L_2}, {0, K_1, J_1, L_1}, - {0, H_14, G_14, I_14}, {0, H_13, G_13, I_13}, {0, H_12, G_12, I_12}, @@ -475,7 +415,6 @@ const is31_led g_is31_leds[DRIVER_LED_TOTAL] = { {0, H_3, G_3, I_3}, {0, H_2, G_2, I_2}, {0, H_1, G_1, I_1}, - {0, E_14, D_14, F_14}, {0, E_12, D_12, F_12}, {0, E_11, D_11, F_11}, @@ -489,7 +428,6 @@ const is31_led g_is31_leds[DRIVER_LED_TOTAL] = { {0, E_3, D_3, F_3}, {0, E_2, D_2, F_2}, {0, E_1, D_1, F_1}, - {0, B_13, A_13, C_13}, {0, B_11, A_11, C_11}, {0, B_10, A_10, C_10}, @@ -502,7 +440,6 @@ const is31_led g_is31_leds[DRIVER_LED_TOTAL] = { {0, B_3, A_3, C_3}, {0, B_2, A_2, C_2}, {0, B_1, A_1, C_1}, - {0, B_15, A_15, C_15}, {0, E_13, D_13, F_13}, {0, B_12, A_12, C_12}, @@ -510,9 +447,8 @@ const is31_led g_is31_leds[DRIVER_LED_TOTAL] = { {0, B_16, A_16, C_16}, {0, E_16, D_16, F_16}, {0, H_16, G_16, I_16}, - {0, K_16, J_16, L_16} + {0, K_16, J_16, L_16}, }; - const rgb_led g_rgb_leds[DRIVER_LED_TOTAL] = { {{0|(13<<4)}, {16*13.5, 0}, 1}, {{0|(12<<4)}, {16*12, 0}, 1}, @@ -528,7 +464,6 @@ const rgb_led g_rgb_leds[DRIVER_LED_TOTAL] = { {{0|(2<<4)}, {16*2, 0}, 1}, {{0|(1<<4)}, {16*1, 0}, 1}, {{0|(0<<4)}, {16*0, 0}, 1}, - {{1|(13<<4)}, {16*13.75, 16}, 1}, {{1|(12<<4)}, {16*12.5, 16}, 0}, {{1|(11<<4)}, {16*11.5, 16}, 0}, @@ -543,7 +478,6 @@ const rgb_led g_rgb_leds[DRIVER_LED_TOTAL] = { {{1|(2<<4)}, { 16*2.5, 16}, 0}, {{1|(1<<4)}, { 16*1.5, 16}, 0}, {{1|(0<<4)}, { 16*0.25, 16}, 1}, - {{2|(13<<4)}, {16*13.375, 24}, 1}, {{2|(11<<4)}, {16*11.75, 32}, 0}, {{2|(10<<4)}, {16*10.75, 32}, 0}, @@ -557,7 +491,6 @@ const rgb_led g_rgb_leds[DRIVER_LED_TOTAL] = { {{2|(2<<4)}, { 16*2.75, 32}, 0}, {{2|(1<<4)}, { 16*1.75, 32}, 0}, {{2|(0<<4)}, { 16*0.375, 32}, 1}, - {{3|(11<<4)}, {16*13.125, 48}, 1}, {{3|(10<<4)}, {16*11.25, 48}, 0}, {{3|(9<<4)}, {16*10.25, 48}, 0}, @@ -570,7 +503,6 @@ const rgb_led g_rgb_leds[DRIVER_LED_TOTAL] = { {{3|(2<<4)}, {16*3.25, 48}, 0}, {{3|(1<<4)}, {16*1.25, 48}, 0}, {{3|(0<<4)}, {16*0.625, 48}, 1}, - {{4|(13<<4)}, {16*13.875, 64}, 1}, {{4|(11<<4)}, {16*12.625, 64}, 1}, {{4|(10<<4)}, {16*11.375, 64}, 1}, @@ -578,17 +510,10 @@ const rgb_led g_rgb_leds[DRIVER_LED_TOTAL] = { {{4|(5<<4)}, { 16*6.375, 64}, 0}, {{4|(2<<4)}, { 16*2.625, 64}, 1}, {{4|(1<<4)}, { 16*1.375, 64}, 1}, - {{4|(0<<4)}, { 16*0.125, 64}, 1} + {{4|(0<<4)}, { 16*0.125, 64}, 1}, }; #else - const is31_led g_is31_leds[DRIVER_LED_TOTAL] = { -/* Refer to IS31 manual for these locations - * driver - * | R location - * | | G location - * | | | B location - * | | | | */ {0, K_14, J_14, L_14}, {0, K_13, J_13, L_13}, {0, K_12, J_12, L_12}, @@ -603,7 +528,6 @@ const is31_led g_is31_leds[DRIVER_LED_TOTAL] = { {0, K_3, J_3, L_3}, {0, K_2, J_2, L_2}, {0, K_1, J_1, L_1}, - {0, H_14, G_14, I_14}, {0, H_13, G_13, I_13}, {0, H_12, G_12, I_12}, @@ -618,7 +542,6 @@ const is31_led g_is31_leds[DRIVER_LED_TOTAL] = { {0, H_3, G_3, I_3}, {0, H_2, G_2, I_2}, {0, H_1, G_1, I_1}, - {0, E_14, D_14, F_14}, {0, E_12, D_12, F_12}, {0, E_11, D_11, F_11}, @@ -632,7 +555,6 @@ const is31_led g_is31_leds[DRIVER_LED_TOTAL] = { {0, E_3, D_3, F_3}, {0, E_2, D_2, F_2}, {0, E_1, D_1, F_1}, - {0, B_14, A_14, C_14}, {0, B_13, A_13, C_13}, {0, B_11, A_11, C_11}, @@ -646,7 +568,6 @@ const is31_led g_is31_leds[DRIVER_LED_TOTAL] = { {0, B_3, A_3, C_3}, {0, B_2, A_2, C_2}, {0, B_1, A_1, C_1}, - {0, B_15, A_15, C_15}, {0, E_13, D_13, F_13}, {0, B_12, A_12, C_12}, @@ -655,9 +576,8 @@ const is31_led g_is31_leds[DRIVER_LED_TOTAL] = { {0, B_16, A_16, C_16}, {0, E_16, D_16, F_16}, {0, H_16, G_16, I_16}, - {0, K_16, J_16, L_16} + {0, K_16, J_16, L_16}, }; - const rgb_led g_rgb_leds[DRIVER_LED_TOTAL] = { {{0|(13<<4)}, {17.23*13, 0}, 1}, {{0|(12<<4)}, {17.23*12, 0}, 1}, @@ -673,7 +593,6 @@ const rgb_led g_rgb_leds[DRIVER_LED_TOTAL] = { {{0|(2<<4)}, { 17.23*2, 0}, 1}, {{0|(1<<4)}, { 17.23*1, 0}, 1}, {{0|(0<<4)}, { 17.23*0, 0}, 1}, - {{1|(13<<4)}, {17.23*13, 16}, 1}, {{1|(12<<4)}, {17.23*12, 16}, 0}, {{1|(11<<4)}, {17.23*11, 16}, 0}, @@ -688,7 +607,6 @@ const rgb_led g_rgb_leds[DRIVER_LED_TOTAL] = { {{1|(2<<4)}, { 17.23*2, 16}, 0}, {{1|(1<<4)}, { 17.23*1, 16}, 0}, {{1|(0<<4)}, { 17.23*0, 16}, 1}, - {{2|(13<<4)}, {17.23*13, 32}, 1}, {{2|(11<<4)}, {17.23*11, 32}, 0}, {{2|(10<<4)}, {17.23*10, 32}, 0}, @@ -702,7 +620,6 @@ const rgb_led g_rgb_leds[DRIVER_LED_TOTAL] = { {{2|(2<<4)}, { 17.23*2, 32}, 0}, {{2|(1<<4)}, { 17.23*1, 32}, 0}, {{2|(0<<4)}, { 17.23*0, 32}, 1}, - {{3|(13<<4)}, {17.23*13, 48}, 1}, {{3|(11<<4)}, {17.23*11, 48}, 0}, {{3|(10<<4)}, {17.23*10, 48}, 0}, @@ -716,7 +633,6 @@ const rgb_led g_rgb_leds[DRIVER_LED_TOTAL] = { {{3|(2<<4)}, { 17.23*2, 48}, 0}, {{3|(1<<4)}, { 17.23*1, 48}, 0}, {{3|(0<<4)}, { 17.23*0, 48}, 1}, - {{4|(13<<4)}, {17.23*13, 64}, 1}, {{4|(11<<4)}, {17.23*11, 64}, 1}, {{4|(10<<4)}, {17.23*10, 64}, 1}, @@ -725,32 +641,27 @@ const rgb_led g_rgb_leds[DRIVER_LED_TOTAL] = { {{4|(5<<4)}, { 17.23*5, 64}, 0}, {{4|(2<<4)}, { 17.23*2, 64}, 1}, {{4|(1<<4)}, { 17.23*1, 64}, 1}, - {{4|(0<<4)}, { 17.23*0, 64}, 1} - + {{4|(0<<4)}, { 17.23*0, 64}, 1}, }; #endif void matrix_init_kb(void) { matrix_init_user(); } - - void matrix_scan_kb(void) { matrix_scan_user(); } - - bool process_record_kb(uint16_t keycode, keyrecord_t *record) { return process_record_user(keycode, record); } - - void suspend_power_down_kb(void) { rgb_matrix_set_suspend_state(true); + suspend_power_down_user(); } void suspend_wakeup_init_kb(void) { rgb_matrix_set_suspend_state(false); + suspend_wakeup_init_user(); } diff --git a/keyboards/dztech/dz60rgb/keymaps/default/keymap.c b/keyboards/dztech/dz60rgb/keymaps/default/keymap.c index 0eff4ca8a37..c0bc1b89b1d 100644 --- a/keyboards/dztech/dz60rgb/keymaps/default/keymap.c +++ b/keyboards/dztech/dz60rgb/keymaps/default/keymap.c @@ -5,26 +5,23 @@ extern bool g_suspend_state; #define _LAYER2 2 #define _LAYER3 3 #define _LAYER4 4 -#define _LAYER5 5 -#define _LAYER6 6 -#define _LAYER7 7 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { [_LAYER0] = LAYOUT( /* Base */ - KC_GESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC,\ - KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLASH,\ - CTL_T(KC_CAPS), KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, \ - KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, RSFT_T(KC_SLSH), KC_UP, LT(2, KC_DEL),\ - KC_LCTL, KC_LGUI, LM(1, MOD_LALT), KC_SPC, KC_RALT, MO(1) , KC_LEFT, KC_DOWN, KC_RIGHT), + KC_GESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC,\ + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLASH,\ + CTL_T(KC_CAPS), KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, \ + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, RSFT_T(KC_SLSH), KC_UP, LT(2, KC_DEL),\ + KC_LCTL, KC_LGUI, LM(1, MOD_LALT), KC_SPC, KC_RALT, MO(1), KC_LEFT, KC_DOWN, KC_RIGHT), [_LAYER1] = LAYOUT( /* FN */ TO(3), KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL ,\ KC_TRNS, KC_TRNS, KC_UP, KC_TRNS, KC_TRNS, KC_TRNS, KC_CALC, KC_TRNS, KC_INS, KC_TRNS, KC_PSCR, KC_SLCK, KC_PAUS, RESET ,\ - KC_TRNS, KC_LEFT, KC_DOWN, KC_RIGHT, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_HOME, KC_PGUP, KC_TRNS,\ + KC_TRNS, KC_LEFT, KC_DOWN, KC_RIGHT, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_HOME, KC_PGUP, EEP_RST,\ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_END, KC_PGDOWN,KC_VOLU, KC_MUTE,\ KC_TRNS, KC_TRNS, KC_TRNS, TO(4), KC_TRNS, KC_TRNS, KC_MPRV, KC_VOLD, KC_MNXT), [_LAYER2] = LAYOUT( /* LIGHT */ KC_TRNS, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL ,\ KC_TRNS, RGB_TOG, KC_TRNS, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, RGB_MOD, KC_TRNS, KC_TRNS, KC_TRNS, RESET ,\ - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RGB_SPI, RGB_SPD, KC_TRNS, KC_TRNS, KC_TRNS,\ + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RGB_SPI, RGB_SPD, KC_TRNS, KC_TRNS, EEP_RST,\ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,\ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS), [_LAYER3] = LAYOUT( /* NUMPAD */ @@ -33,38 +30,18 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { KC_TRNS, KC_P4, KC_P5, KC_P6, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_P4, KC_P5, KC_P6, KC_TRNS, KC_PENT,\ KC_TRNS, KC_P1, KC_P2, KC_P3, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_P1, KC_P2, KC_P3, KC_TRNS, KC_TRNS,\ KC_TRNS, KC_P0, KC_PDOT, KC_PENT, KC_P0, KC_PDOT, KC_TRNS, KC_TRNS, KC_TRNS), - [_LAYER4] = LAYOUT( /* MAC */ - KC_GESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC,\ - KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLASH,\ - CTL_T(KC_CAPS), KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, \ - KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, RSFT_T(KC_SLSH), KC_UP, LT(2, KC_DEL),\ - KC_LCTL, KC_LALT, KC_LGUI, KC_SPC, KC_RALT, MO(5) , KC_LEFT, KC_DOWN, KC_RIGHT), + [_LAYER4] = LAYOUT( /* SWITCH LALT AND LGUI */ + KC_GESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC,\ + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLASH,\ + CTL_T(KC_CAPS), KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, \ + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, RSFT_T(KC_SLSH), KC_UP, LT(2, KC_DEL),\ + KC_LCTL, KC_LALT, KC_LGUI, KC_SPC, KC_RALT, TO(0), KC_LEFT, KC_DOWN, KC_RIGHT), }; - - -void rgb_matrix_layer_helper (uint8_t red, uint8_t green, uint8_t blue, bool default_layer) { - rgb_led led; - for (int i = 0; i < DRIVER_LED_TOTAL; i++) { - led = g_rgb_leds[i]; - if (led.matrix_co.raw < 0xFF) { - if (led.modifier) { - rgb_matrix_set_color( i, red, green, blue ); - } - } - } -} - void rgb_matrix_indicators_user(void) { uint8_t this_led = host_keyboard_leds(); if (!g_suspend_state) { switch (biton32(layer_state)) { - case _LAYER1: - rgb_matrix_layer_helper(0xFF, 0x00, 0x00, false); - break; - case _LAYER2: - rgb_matrix_layer_helper(0x00, 0xFF, 0x00, false); - break; case _LAYER3: if ( this_led & (1< Date: Sun, 21 Apr 2019 19:43:23 +0300 Subject: [PATCH 161/171] [Keymap] Add keymap for keebio/quefrency 65% version (#5666) * add keymap * fix readme title * renamed README.md to lowercase, fix typo * renamed README.md to lowercase, for real * add double spaces for github * lowercase name in readme * rename directory to lowercase --- .../quefrency/keymaps/georgepetri/config.h | 24 ++++++++++ .../quefrency/keymaps/georgepetri/keymap.c | 44 +++++++++++++++++ .../quefrency/keymaps/georgepetri/readme.md | 48 +++++++++++++++++++ .../quefrency/keymaps/georgepetri/rules.mk | 0 4 files changed, 116 insertions(+) create mode 100644 keyboards/keebio/quefrency/keymaps/georgepetri/config.h create mode 100644 keyboards/keebio/quefrency/keymaps/georgepetri/keymap.c create mode 100644 keyboards/keebio/quefrency/keymaps/georgepetri/readme.md create mode 100644 keyboards/keebio/quefrency/keymaps/georgepetri/rules.mk diff --git a/keyboards/keebio/quefrency/keymaps/georgepetri/config.h b/keyboards/keebio/quefrency/keymaps/georgepetri/config.h new file mode 100644 index 00000000000..d72d7760ef9 --- /dev/null +++ b/keyboards/keebio/quefrency/keymaps/georgepetri/config.h @@ -0,0 +1,24 @@ +/* +This is the c configuration file for the keymap + +Copyright 2012 Jun Wako +Copyright 2015 Jack Humbert +Copyright 2018 Danny Nguyen + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#pragma once + +#define USE_I2C \ No newline at end of file diff --git a/keyboards/keebio/quefrency/keymaps/georgepetri/keymap.c b/keyboards/keebio/quefrency/keymaps/georgepetri/keymap.c new file mode 100644 index 00000000000..f08ab4f8343 --- /dev/null +++ b/keyboards/keebio/quefrency/keymaps/georgepetri/keymap.c @@ -0,0 +1,44 @@ +#include QMK_KEYBOARD_H + +extern keymap_config_t keymap_config; + +// Each layer gets a name for readability, which is then used in the keymap matrix below. +// The underscores don't mean anything - you can have a layer called STUFF or any other name. +// Layer names don't all need to be of the same length, obviously, and you can also skip them +// entirely and just use numbers. +#define _BASE 0 +#define _FN1 1 + +enum custom_keycodes { + QWERTY = SAFE_RANGE, +}; + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [_BASE] = LAYOUT_65( +// ┌────────┬────────┬────────┬────────┬────────┬────────┬────────┐ ┌────────┬────────┬────────┬────────┬────────┬────────┬────────┬────────┬────────┐ + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_DEL, KC_HOME,\ +// ├────────┴────┬───┴────┬───┴────┬───┴────┬───┴────┬───┴────┬───┘ ┌───┴────┬───┴────┬───┴────┬───┴────┬───┴────┬───┴────┬───┴────┬───┴────────┼────────┤ + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_END, \ +// ├─────────────┴─┬──────┴─┬──────┴─┬──────┴─┬──────┴─┬──────┴─┐ └─┬──────┴─┬──────┴─┬──────┴─┬──────┴─┬──────┴─┬──────┴─┬──────┴────────────┼────────┤ + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_PGUP,\ +// ├───────────────┴─────┬──┴─────┬──┴─────┬──┴─────┬──┴─────┬──┴─────┐ └─────┬──┴─────┬──┴─────┬──┴─────┬──┴─────┬──┴─────┬──┴───────────────────┼────────┤ + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, _______, KC_PGDN,\ +// ├──────────┬──────────┴┬───────┴──┬─────┴─────┬──┴────────┴────────┤ ├────────┴────────┴────┬───┴────┬───┴────┬───┴────┬────────┬────────┼────────┤ + KC_LCTL, KC_LGUI, KC_LALT, MO(_FN1), KC_SPC, KC_SPC ,_______, KC_RALT, KC_RCTL, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT +// └──────────┴───────────┴──────────┴───────────┴────────────────────┘ └──────────────────────┴────────┴────────┴────────┴────────┴────────┴────────┘ + ), + + [_FN1] = LAYOUT_65( +// ┌────────┬────────┬────────┬────────┬────────┬────────┬────────┐ ┌────────┬────────┬────────┬────────┬────────┬────────┬────────┬────────┬────────┐ + KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_BSPC, KC_DEL, KC_INS, \ +// ├────────┴────┬───┴────┬───┴────┬───┴────┬───┴────┬───┴────┬───┘ ┌───┴────┬───┴────┬───┴────┬───┴────┬───┴────┬───┴────┬───┴────┬───┴────────┼────────┤ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_PAUS,\ +// ├─────────────┴─┬──────┴─┬──────┴─┬──────┴─┬──────┴─┬──────┴─┐ └─┬──────┴─┬──────┴─┬──────┴─┬──────┴─┬──────┴─┬──────┴─┬──────┴────────────┼────────┤ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,\ +// ├───────────────┴─────┬──┴─────┬──┴─────┬──┴─────┬──┴─────┬──┴─────┐ └─────┬──┴─────┬──┴─────┬──┴─────┬──┴─────┬──┴─────┬──┴───────────────────┼────────┤ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,\ +// ├──────────┬──────────┴┬───────┴──┬─────┴─────┬──┴────────┴────────┤ ├────────┴────────┴────┬───┴────┬───┴────┬───┴────┬────────┬────────┼────────┤ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ +// └──────────┴───────────┴──────────┴───────────┴────────────────────┘ └──────────────────────┴────────┴────────┴────────┴────────┴────────┴────────┘ + ) +}; diff --git a/keyboards/keebio/quefrency/keymaps/georgepetri/readme.md b/keyboards/keebio/quefrency/keymaps/georgepetri/readme.md new file mode 100644 index 00000000000..425190d198d --- /dev/null +++ b/keyboards/keebio/quefrency/keymaps/georgepetri/readme.md @@ -0,0 +1,48 @@ +# George Petri's Quefrency 65 layout + +``` +make keebio/quefrency:georgepetri +``` + +Based on the default querty layout with minor tweaks. +The position of the arrow keys in a line in the bottom right. +The backspace key is 1u and to the left of the delete key. +Grave, pause and insert are on the function layer. + +### Base Layer +``` +┌──────┐┌──────┐┌──────┐┌──────┐┌──────┐┌──────┐┌──────┐ ┌──────┐┌──────┐┌──────┐┌──────┐┌──────┐┌──────┐┌──────┐┌──────┐┌──────┐ +│ ESC ││ 1 ││ 2 ││ 3 ││ 4 ││ 5 ││ 6 │ │ 7 ││ 8 ││ 9 ││ 0 ││ MINS││ EQL ││ BSPC││ DEL ││ HOME│ +└──────┘└──────┘└──────┘└──────┘└──────┘└──────┘└──────┘ └──────┘└──────┘└──────┘└──────┘└──────┘└──────┘└──────┘└──────┘└──────┘ +┌──────────┐┌──────┐┌──────┐┌──────┐┌──────┐┌──────┐ ┌──────┐┌──────┐┌──────┐┌──────┐┌──────┐┌──────┐┌──────┐┌──────────┐┌──────┐ +│ TAB ││ Q ││ W ││ E ││ R ││ T │ │ Y ││ U ││ I ││ O ││ P ││ LBRC││ RBRC││ BSLS ││ END │ +└──────────┘└──────┘└──────┘└──────┘└──────┘└──────┘ └──────┘└──────┘└──────┘└──────┘└──────┘└──────┘└──────┘└──────────┘└──────┘ +┌────────────┐┌──────┐┌──────┐┌──────┐┌──────┐┌──────┐ ┌──────┐┌──────┐┌──────┐┌──────┐┌──────┐┌──────┐┌────────────────┐┌──────┐ +│ CAPS ││ A ││ S ││ D ││ F ││ G │ │ H ││ J ││ K ││ L ││ SCLN││ QUOT││ ENT ││ PGUP│ +└────────────┘└──────┘└──────┘└──────┘└──────┘└──────┘ └──────┘└──────┘└──────┘└──────┘└──────┘└──────┘└────────────────┘└──────┘ +┌────────────────┐┌──────┐┌──────┐┌──────┐┌──────┐┌──────┐ ┌──────┐┌──────┐┌──────┐┌──────┐┌──────┐┌────────────────────┐┌──────┐ +│ LSFT ││ Z ││ X ││ C ││ V ││ B │ │ N ││ M ││ COMM││ DOT ││ SLSH││ RSFT ││ PGDN│ +└────────────────┘└──────┘└──────┘└──────┘└──────┘└──────┘ └──────┘└──────┘└──────┘└──────┘└──────┘└────────────────────┘└──────┘ +┌────────┐┌────────┐┌────────┐┌────────┐┌────────────────┐ ┌────────────────────┐┌──────┐┌──────┐┌──────┐┌──────┐┌──────┐┌──────┐ +│ LCTL ││ LGUI ││ LALT ││MO(_FN1)││ SPC │ │ SPC ││ RALT││ RCTL││ LEFT││ DOWN││ UP ││ RGHT│ +└────────┘└────────┘└────────┘└────────┘└────────────────┘ └────────────────────┘└──────┘└──────┘└──────┘└──────┘└──────┘└──────┘ +``` + +### Function +``` +┌──────┐┌──────┐┌──────┐┌──────┐┌──────┐┌──────┐┌──────┐ ┌──────┐┌──────┐┌──────┐┌──────┐┌──────┐┌──────┐┌──────┐┌──────┐┌──────┐ +│ GRV ││ F1 ││ F2 ││ F3 ││ F4 ││ F5 ││ F6 │ │ F7 ││ F8 ││ F9 ││ F10 ││ F11 ││ F12 ││ BSPC││ DEL ││ INS │ +└──────┘└──────┘└──────┘└──────┘└──────┘└──────┘└──────┘ └──────┘└──────┘└──────┘└──────┘└──────┘└──────┘└──────┘└──────┘└──────┘ +┌──────────┐┌──────┐┌──────┐┌──────┐┌──────┐┌──────┐ ┌──────┐┌──────┐┌──────┐┌──────┐┌──────┐┌──────┐┌──────┐┌──────────┐┌──────┐ +│ ││ ││ ││ ││ ││ │ │ ││ ││ ││ ││ ││ ││ ││ ││ PAUS│ +└──────────┘└──────┘└──────┘└──────┘└──────┘└──────┘ └──────┘└──────┘└──────┘└──────┘└──────┘└──────┘└──────┘└──────────┘└──────┘ +┌────────────┐┌──────┐┌──────┐┌──────┐┌──────┐┌──────┐ ┌──────┐┌──────┐┌──────┐┌──────┐┌──────┐┌──────┐┌────────────────┐┌──────┐ +│ ││ ││ ││ ││ ││ │ │ ││ ││ ││ ││ ││ ││ ││ │ +└────────────┘└──────┘└──────┘└──────┘└──────┘└──────┘ └──────┘└──────┘└──────┘└──────┘└──────┘└──────┘└────────────────┘└──────┘ +┌────────────────┐┌──────┐┌──────┐┌──────┐┌──────┐┌──────┐ ┌──────┐┌──────┐┌──────┐┌──────┐┌──────┐┌────────────────────┐┌──────┐ +│ ││ ││ ││ ││ ││ │ │ ││ ││ ││ ││ ││ ││ │ +└────────────────┘└──────┘└──────┘└──────┘└──────┘└──────┘ └──────┘└──────┘└──────┘└──────┘└──────┘└────────────────────┘└──────┘ +┌────────┐┌────────┐┌────────┐┌────────┐┌────────────────┐ ┌────────────────────┐┌──────┐┌──────┐┌──────┐┌──────┐┌──────┐┌──────┐ +│ ││ ││ ││ ││ │ │ ││ ││ ││ ││ ││ ││ │ +└────────┘└────────┘└────────┘└────────┘└────────────────┘ └────────────────────┘└──────┘└──────┘└──────┘└──────┘└──────┘└──────┘ +``` \ No newline at end of file diff --git a/keyboards/keebio/quefrency/keymaps/georgepetri/rules.mk b/keyboards/keebio/quefrency/keymaps/georgepetri/rules.mk new file mode 100644 index 00000000000..e69de29bb2d From 81d8e6ef3e4d69dba8e9ba40db525ab4181ab3e3 Mon Sep 17 00:00:00 2001 From: MechMerlin <30334081+mechmerlin@users.noreply.github.com> Date: Sun, 21 Apr 2019 19:59:39 -0700 Subject: [PATCH 162/171] [Keyboard] Doro67 RGB PCB (#5677) * initial commit * get rid of some of the vanilla code * set up matrix and pins * Create LAYOUT macro and an appropriate keymap * support for caps lock LED * add some documentation to the doro67 parent readme * align the language used in the several readme files * initial commit * get rid of some of the vanilla code * set up matrix and pins * Create LAYOUT macro and an appropriate keymap * support for caps lock LED * add some documentation to the doro67 parent readme * align the language used in the several readme files * Use RGB Matrix and fix enter key bug * fix formatting * remove merge conflict artifacts * make a more useful default keymap * add configurator support for the RGB pcb * fix rgb matrix based on new info. Multipler should be reversed * forgot to actually set the pin output for caps lock led * fix offset keys in layer 1 keymap * code cleanup * use macros for the rgb_led calculations struct * set RGB led num to 67 as I mistakenly counted the caps lock led * cleanup config.h file * add RGB note in readme * get consistent naming in config file * fix some inconsistencies * readjust matrix and get rid of macros based on drashna's suggestions --- keyboards/doro67/multi/readme.md | 7 +- keyboards/doro67/readme.md | 12 ++ keyboards/doro67/regular/config.h | 4 +- keyboards/doro67/regular/readme.md | 6 +- keyboards/doro67/rgb/config.h | 71 ++++++++++ keyboards/doro67/rgb/info.json | 82 +++++++++++ keyboards/doro67/rgb/keymaps/default/config.h | 19 +++ keyboards/doro67/rgb/keymaps/default/keymap.c | 62 +++++++++ .../doro67/rgb/keymaps/default/readme.md | 1 + keyboards/doro67/rgb/readme.md | 17 +++ keyboards/doro67/rgb/rgb.c | 127 ++++++++++++++++++ keyboards/doro67/rgb/rgb.h | 41 ++++++ keyboards/doro67/rgb/rules.mk | 83 ++++++++++++ 13 files changed, 522 insertions(+), 10 deletions(-) create mode 100644 keyboards/doro67/rgb/config.h create mode 100644 keyboards/doro67/rgb/info.json create mode 100644 keyboards/doro67/rgb/keymaps/default/config.h create mode 100644 keyboards/doro67/rgb/keymaps/default/keymap.c create mode 100644 keyboards/doro67/rgb/keymaps/default/readme.md create mode 100644 keyboards/doro67/rgb/readme.md create mode 100644 keyboards/doro67/rgb/rgb.c create mode 100644 keyboards/doro67/rgb/rgb.h create mode 100644 keyboards/doro67/rgb/rules.mk diff --git a/keyboards/doro67/multi/readme.md b/keyboards/doro67/multi/readme.md index ac1484cd743..40fd53ee11a 100644 --- a/keyboards/doro67/multi/readme.md +++ b/keyboards/doro67/multi/readme.md @@ -1,9 +1,6 @@ -Doro67 Multi PCB -=== +# Doro67 Multi PCB -A custom 65% keyboard with multiple layout support. - -Do not flash RGB firmware for this board. +65% custom keyboard made by 80ultraman/Alf/Backprop Studios with multiple layout support. Despite the layout options available, layout is dictated by the selected integrated plate. Keyboard Maintainer: [ShadeDream](https://github.com/shadedream) Hardware Supported: Doro67 Multi PCB diff --git a/keyboards/doro67/readme.md b/keyboards/doro67/readme.md index e69de29bb2d..1648fbde577 100644 --- a/keyboards/doro67/readme.md +++ b/keyboards/doro67/readme.md @@ -0,0 +1,12 @@ +# Doro67 + +The Doro67 is a 65% USB C, integrated plate keyboard with blocker based on the M65-a by Keyclack/Rama. + +The [Group Buy](https://geekhack.org/index.php?topic=97265.0) was run by 80ultraman in coordination with Alf for machining and Backprop Studios for PCB design. + +There were 3 different PCBs available for this group buy. +## **Please be aware of which PCB you own and flash the correct firmware on it.** + +**Regular:** PCB made for the China GB which only had 1 layout. +**Multi:** PCB made for the international GB comprising of multiple layouts. While several layouts were possible, layout was determined by the integrated plate layout chosen by the customer. +**RGB:** PCB made for the international GB which had an identical switch matrix and layout to the regular PCB, with the addition of per key RGB LEDs. \ No newline at end of file diff --git a/keyboards/doro67/regular/config.h b/keyboards/doro67/regular/config.h index 9ba591cdd94..8c5c670da92 100644 --- a/keyboards/doro67/regular/config.h +++ b/keyboards/doro67/regular/config.h @@ -6,8 +6,8 @@ #define VENDOR_ID 0xFEED #define PRODUCT_ID 0x0000 #define DEVICE_VER 0x0001 -#define MANUFACTURER 80ultraman -#define PRODUCT doro67 +#define MANUFACTURER Backprop Studio +#define PRODUCT Doro67 Regular PCB #define DESCRIPTION 65% custom keyboard /* key matrix size */ diff --git a/keyboards/doro67/regular/readme.md b/keyboards/doro67/regular/readme.md index 71d27ceb527..7635a40f95e 100644 --- a/keyboards/doro67/regular/readme.md +++ b/keyboards/doro67/regular/readme.md @@ -1,8 +1,8 @@ -# Regular PCB for the Doro67 +# Doro67 Regular PCB -Regular PCB for the Doro67 having ONLY one layout. This is not the PCB with RGB support. +65% custom keyboard made by 80ultraman/Alf/Backprop Studios available during the China Group Buy. -Do not flash RGB firmware for this board. +This is not the PCB with RGB support. Do not flash RGB firmware for this board. Keyboard Maintainer: [MechMerlin](https://github.com/mechmerlin) Hardware Supported: Doro67 Regular PCB diff --git a/keyboards/doro67/rgb/config.h b/keyboards/doro67/rgb/config.h new file mode 100644 index 00000000000..87a30e08472 --- /dev/null +++ b/keyboards/doro67/rgb/config.h @@ -0,0 +1,71 @@ +/* +Copyright 2019 MechMerlin + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#pragma once + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0xFEED +#define PRODUCT_ID 0x0000 +#define DEVICE_VER 0x0001 +#define MANUFACTURER Backprop Studio +#define PRODUCT Doro67 RGB PCB +#define DESCRIPTION 65% custom keyboard + +/* key matrix size */ +#define MATRIX_ROWS 5 +#define MATRIX_COLS 15 + +/* + * Keyboard Matrix Assignments + * + * Change this to how you wired your keyboard + * COLS: AVR pins used for columns, left to right + * ROWS: AVR pins used for rows, top to bottom + * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) + * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) + * +*/ +#define MATRIX_ROW_PINS { D0, D1, D2, D3, D5 } +#define MATRIX_COL_PINS { B0, B1, B2, B3, D4, D6, D7, B4, B5, B6, C6, C7, F5, F6, F7 } +#define UNUSED_PINS + +/* COL2ROW, ROW2COL*/ +#define DIODE_DIRECTION COL2ROW + +// The pin connected to the data pin of the LEDs +#define RGB_DI_PIN B7 +// The number of LEDs connected +#define DRIVER_LED_TOTAL 67 + +#define RGB_MATRIX_KEYPRESSES + +/* + * Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN. + */ +#define SOFT_SERIAL_PIN D0 // or D1, D2, D3, E6 + +#define RGBLED_NUM 67 + +/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ +#define DEBOUNCING_DELAY 5 + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +#define LOCKING_SUPPORT_ENABLE +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE diff --git a/keyboards/doro67/rgb/info.json b/keyboards/doro67/rgb/info.json new file mode 100644 index 00000000000..2d9b79a23e1 --- /dev/null +++ b/keyboards/doro67/rgb/info.json @@ -0,0 +1,82 @@ +{ + "keyboard_name": "Doro 67 RGB", + "url": "", + "maintainer": "qmk", + "width": 16, + "height": 5, + "layouts": { + "LAYOUT": { + "key_count": 67, + "layout": [ + {"label":"K00", "x":0, "y":0}, + {"label":"K01", "x":1, "y":0}, + {"label":"K02", "x":2, "y":0}, + {"label":"K03", "x":3, "y":0}, + {"label":"K04", "x":4, "y":0}, + {"label":"K05", "x":5, "y":0}, + {"label":"K06", "x":6, "y":0}, + {"label":"K07", "x":7, "y":0}, + {"label":"K08", "x":8, "y":0}, + {"label":"K09", "x":9, "y":0}, + {"label":"K0A", "x":10, "y":0}, + {"label":"K0B", "x":11, "y":0}, + {"label":"K0C", "x":12, "y":0}, + {"label":"K0D", "x":13, "y":0, "w":2}, + {"label":"K0E", "x":15, "y":0}, + {"label":"K10", "x":0, "y":1, "w":1.5}, + {"label":"K11", "x":1.5, "y":1}, + {"label":"K12", "x":2.5, "y":1}, + {"label":"K13", "x":3.5, "y":1}, + {"label":"K14", "x":4.5, "y":1}, + {"label":"K15", "x":5.5, "y":1}, + {"label":"K16", "x":6.5, "y":1}, + {"label":"K17", "x":7.5, "y":1}, + {"label":"K18", "x":8.5, "y":1}, + {"label":"K19", "x":9.5, "y":1}, + {"label":"K1A", "x":10.5, "y":1}, + {"label":"K1B", "x":11.5, "y":1}, + {"label":"K1C", "x":12.5, "y":1}, + {"label":"K1D", "x":13.5, "y":1, "w":1.5}, + {"label":"K1E", "x":15, "y":1}, + {"label":"K20", "x":0, "y":2, "w":1.75}, + {"label":"K21", "x":1.75, "y":2}, + {"label":"K22", "x":2.75, "y":2}, + {"label":"K23", "x":3.75, "y":2}, + {"label":"K24", "x":4.75, "y":2}, + {"label":"K25", "x":5.75, "y":2}, + {"label":"K26", "x":6.75, "y":2}, + {"label":"K27", "x":7.75, "y":2}, + {"label":"K28", "x":8.75, "y":2}, + {"label":"K29", "x":9.75, "y":2}, + {"label":"K2A", "x":10.75, "y":2}, + {"label":"K2B", "x":11.75, "y":2}, + {"label":"K2D", "x":12.75, "y":2, "w":2.25}, + {"label":"K2E", "x":15, "y":2}, + {"label":"K30", "x":0, "y":3, "w":2.25}, + {"label":"K32", "x":2.25, "y":3}, + {"label":"K33", "x":3.25, "y":3}, + {"label":"K34", "x":4.25, "y":3}, + {"label":"K35", "x":5.25, "y":3}, + {"label":"K36", "x":6.25, "y":3}, + {"label":"K37", "x":7.25, "y":3}, + {"label":"K38", "x":8.25, "y":3}, + {"label":"K39", "x":9.25, "y":3}, + {"label":"K3A", "x":10.25, "y":3}, + {"label":"K3B", "x":11.25, "y":3}, + {"label":"K3C", "x":12.25, "y":3, "w":1.75}, + {"label":"K3D", "x":14, "y":3}, + {"label":"K3E", "x":15, "y":3}, + {"label":"K40", "x":0, "y":4, "w":1.25}, + {"label":"K41", "x":1.25, "y":4, "w":1.25}, + {"label":"K42", "x":2.5, "y":4, "w":1.25}, + {"label":"K43", "x":3.75, "y":4, "w":6.25}, + {"label":"K49", "x":10, "y":4, "w":1.25}, + {"label":"K4A", "x":11.25, "y":4, "w":1.25}, + {"label":"K4C", "x":13, "y":4}, + {"label":"K4D", "x":14, "y":4}, + {"label":"K4E", "x":15, "y":4} + ] + } + } + } + \ No newline at end of file diff --git a/keyboards/doro67/rgb/keymaps/default/config.h b/keyboards/doro67/rgb/keymaps/default/config.h new file mode 100644 index 00000000000..26c6d6ade10 --- /dev/null +++ b/keyboards/doro67/rgb/keymaps/default/config.h @@ -0,0 +1,19 @@ +/* Copyright 2019 MechMerlin + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#pragma once + +// place overrides here diff --git a/keyboards/doro67/rgb/keymaps/default/keymap.c b/keyboards/doro67/rgb/keymaps/default/keymap.c new file mode 100644 index 00000000000..d02665ae768 --- /dev/null +++ b/keyboards/doro67/rgb/keymaps/default/keymap.c @@ -0,0 +1,62 @@ +/* Copyright 2019 MechMerlin + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ +#include QMK_KEYBOARD_H + +// Defines the keycodes used by our macros in process_record_user +enum custom_keycodes { + QMKBEST = SAFE_RANGE, + QMKURL +}; + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [0] = LAYOUT( \ + KC_GESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_INS, \ + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, \ + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_PGUP, \ + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_LSFT, KC_UP, KC_PGDN, \ + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_LALT, MO(1), KC_LEFT, KC_DOWN, KC_RGHT \ + ), + + [1] = LAYOUT( \ + KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_TRNS, KC_TRNS, \ + QMKBEST, QMKURL, KC_TRNS, KC_TRNS, RESET, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \ + RGB_TOG, RGB_MOD, RGB_HUI, RGB_SAI, RGB_SPI, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \ + KC_TRNS, RGB_RMOD, RGB_HUD, RGB_SAD, RGB_SPD, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \ + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS \ + ), +}; + +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + switch (keycode) { + case QMKBEST: + if (record->event.pressed) { + // when keycode QMKBEST is pressed + SEND_STRING("QMK is the best thing ever!"); + } else { + // when keycode QMKBEST is released + } + break; + case QMKURL: + if (record->event.pressed) { + // when keycode QMKURL is pressed + SEND_STRING("https://qmk.fm/" SS_TAP(X_ENTER)); + } else { + // when keycode QMKURL is released + } + break; + } + return true; +} diff --git a/keyboards/doro67/rgb/keymaps/default/readme.md b/keyboards/doro67/rgb/keymaps/default/readme.md new file mode 100644 index 00000000000..4ba5eb30fde --- /dev/null +++ b/keyboards/doro67/rgb/keymaps/default/readme.md @@ -0,0 +1 @@ +# The default keymap for rgb diff --git a/keyboards/doro67/rgb/readme.md b/keyboards/doro67/rgb/readme.md new file mode 100644 index 00000000000..3a527c933c5 --- /dev/null +++ b/keyboards/doro67/rgb/readme.md @@ -0,0 +1,17 @@ +# Doro67 RGB PCB + +65% custom keyboard made by 80ultraman/Alf/Backprop Studios with in switch RGB featuring the same switch matrix and layout as the regular PCB. + +Flashing the regular PCB firmware on this board will work, but will disable RGB lighting. + +Keyboard Maintainer: [MechMerlin](https://github.com/mechmerlin) +Hardware Supported: Doro 67 RGB PCB +Hardware Availability: [Geekhack GB](https://geekhack.org/index.php?topic=97265.0) + +Make example for this keyboard (after setting up your build environment): + + make doro67/rgb:default + +**RGB Note:** The WS2812 string of LEDs starts from the `K00` key connected to pin `B7` and is connected from left to right, top to bottom, following the physical layout of the board. + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/doro67/rgb/rgb.c b/keyboards/doro67/rgb/rgb.c new file mode 100644 index 00000000000..6f39e00c615 --- /dev/null +++ b/keyboards/doro67/rgb/rgb.c @@ -0,0 +1,127 @@ +/* Copyright 2019 MechMerlin + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ +#include "rgb.h" + +// Optional override functions below. +// You can leave any or all of these undefined. +// These are only required if you want to perform custom actions. + + + +void matrix_init_kb(void) { + // put your keyboard start-up code here + // runs once when the firmware starts up + setPinOutput(E6); + matrix_init_user(); +} + +void matrix_scan_kb(void) { + // put your looping keyboard code here + // runs every cycle (a lot) + + matrix_scan_user(); +} + +bool process_record_kb(uint16_t keycode, keyrecord_t *record) { + // put your per-action keyboard code here + // runs for every action, just before processing by the firmware + + return process_record_user(keycode, record); +} + +void led_set_kb(uint8_t usb_led) { + // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here + if (IS_LED_ON(usb_led, USB_LED_CAPS_LOCK)) { + writePinLow(E6); + } else { + writePinHigh(E6); + } + led_set_user(usb_led); +} + +const rgb_led g_rgb_leds[DRIVER_LED_TOTAL] = { + {{0|(0<<4)}, {15*0, 0}, 0}, // Esc + {{0|(1<<4)}, {15*1, 0}, 0}, // 1 + {{0|(2<<4)}, {15*2, 0}, 0}, // 2 + {{0|(3<<4)}, {15*3, 0}, 0}, // 3 + {{0|(4<<4)}, {15*4, 0}, 0}, // 4 + {{0|(5<<4)}, {15*5, 0}, 0}, // 5 + {{0|(6<<4)}, {15*6, 0}, 0}, // 6 + {{0|(7<<4)}, {15*7, 0}, 0}, // 7 + {{0|(8<<4)}, {15*8, 0}, 0}, // 8 + {{0|(9<<4)}, {15*9, 0}, 0}, // 9 + {{0|(10<<4)}, {15*10, 0}, 0}, // 0 + {{0|(11<<4)}, {15*11, 0}, 0}, // - + {{0|(12<<4)}, {15*12, 0}, 0}, // = + {{0|(13<<4)}, {15*13.5, 0}, 1}, // Backspace + {{0|(14<<4)}, {15*15, 0}, 1}, // Ins + + {{1|(0<<4)}, {15*0.5, 16}, 1}, // Tab + {{1|(1<<4)}, {15*1.5, 16}, 0}, // Q + {{1|(2<<4)}, {15*2.5, 16}, 0}, // W + {{1|(3<<4)}, {15*3.5, 16}, 0}, // E + {{1|(4<<4)}, {15*4.5, 16}, 0}, // R + {{1|(5<<4)}, {15*5.5, 16}, 0}, // T + {{1|(6<<4)}, {15*6.5, 16}, 0}, // Y + {{1|(7<<4)}, {15*7.5, 16}, 0}, // U + {{1|(8<<4)}, {15*8.5, 16}, 0}, // I + {{1|(9<<4)}, {15*9.5, 16}, 0}, // O + {{1|(10<<4)}, {15*10.5, 16}, 0}, // P + {{1|(11<<4)}, {15*11.5, 16}, 0}, // [ + {{1|(12<<4)}, {15*12.5, 16}, 0}, // ] + {{1|(13<<4)}, {15*13.75, 16}, 1}, // + {{1|(14<<4)}, {15*15, 16}, 1}, // Del + + {{2|(0<<4)}, {15*0.75, 32}, 1}, // Capslock + {{2|(1<<4)}, {15*1.75, 32}, 0}, // A + {{2|(2<<4)}, {15*2.75, 32}, 0}, // S + {{2|(3<<4)}, {15*3.75, 32}, 0}, // D + {{2|(4<<4)}, {15*4.75, 32}, 0}, // F + {{2|(5<<4)}, {15*5.75, 32}, 0}, // G + {{2|(6<<4)}, {15*6.75, 32}, 0}, // H + {{2|(7<<4)}, {15*7.75, 32}, 0}, // J + {{2|(8<<4)}, {15*8.75, 32}, 0}, // K + {{2|(9<<4)}, {15*9.75, 32}, 0}, // L + {{2|(10<<4)}, {15*10.75, 32}, 0}, // ; + {{2|(11<<4)}, {15*11.75, 32}, 0}, // ' + {{2|(13<<4)}, {15*13.25, 32}, 1}, // Enter + {{2|(14<<4)}, {15*15, 32}, 1}, // Pgup + + {{3|(0<<4)}, {15*1.25, 48}, 1}, // LShift + {{3|(2<<4)}, {15*2, 48}, 0}, // Z + {{3|(3<<4)}, {15*3, 48}, 0}, // X + {{3|(4<<4)}, {15*4, 48}, 0}, // C + {{3|(5<<4)}, {15*5, 48}, 0}, // V + {{3|(6<<4)}, {15*6, 48}, 0}, // B + {{3|(7<<4)}, {15*7, 48}, 0}, // N + {{3|(8<<4)}, {15*8, 48}, 0}, // M + {{3|(9<<4)}, {15*9, 48}, 0}, // , + {{3|(10<<4)}, {15*10, 48}, 0}, // . + {{3|(11<<4)}, {15*11, 48}, 0}, // / + {{3|(12<<4)}, {15*12.75, 48}, 1}, // Shift + {{3|(13<<4)}, {15*14, 48}, 1}, // Up + {{3|(14<<4)}, {15*15, 48}, 1}, // Pgdn + + {{4|(0<<4)}, {15*0.25, 64}, 1}, // Ctrl + {{4|(1<<4)}, {15*1.5, 64}, 1}, // GUI + {{4|(2<<4)}, {15*2.25, 64}, 1}, // Alt + {{4|(3<<4)}, {15*6.75, 64}, 0}, // Space + {{4|(9<<4)}, {15*9, 64}, 1}, // RAlt + {{4|(10<<4)}, {15*10.25, 64}, 1}, // FN + {{4|(12<<4)}, {15*13, 64}, 1}, // Left + {{4|(13<<4)}, {15*14, 64}, 1}, // Down + {{4|(14<<4)}, {15*15, 64}, 1}, // Right +}; diff --git a/keyboards/doro67/rgb/rgb.h b/keyboards/doro67/rgb/rgb.h new file mode 100644 index 00000000000..aafba11d0e6 --- /dev/null +++ b/keyboards/doro67/rgb/rgb.h @@ -0,0 +1,41 @@ +/* Copyright 2019 MechMerlin + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ +#pragma once + +#include "quantum.h" + +/* This a shortcut to help you visually see your layout. + * + * The first section contains all of the arguments representing the physical + * layout of the board and position of the keys. + * + * The second converts the arguments into a two-dimensional array which + * represents the switch matrix. + */ +#define LAYOUT( \ + k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C, k0D, k0E, \ + k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1A, k1B, k1C, k1D, k1E, \ + k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2A, k2B, k2D, k2E, \ + k30, k32, k33, k34, k35, k36, k37, k38, k39, k3A, k3B, k3C, k3D, k3E, \ + k40, k41, k42, k43, k49, k4A, k4C, k4D, k4E \ +) \ +{ \ + { k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C, k0D, k0E }, \ + { k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1A, k1B, k1C, k1D, k1E }, \ + { k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2A, k2B, KC_NO, k2D, k2E }, \ + { k30, KC_NO, k32, k33, k34, k35, k36, k37, k38, k39, k3A, k3B, k3C, k3D, k3E }, \ + { k40, k41, k42, k43, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, k49, k4A, KC_NO, k4C, k4D, k4E }, \ +} diff --git a/keyboards/doro67/rgb/rules.mk b/keyboards/doro67/rgb/rules.mk new file mode 100644 index 00000000000..6438868dc03 --- /dev/null +++ b/keyboards/doro67/rgb/rules.mk @@ -0,0 +1,83 @@ +# MCU name +#MCU = at90usb1286 +MCU = atmega32u4 + +# Processor frequency. +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to +# calculate timings. Do NOT tack on a 'UL' at the end, this will be done +# automatically to create a 32-bit value in your source code. +# +# This will be an integer division of F_USB below, as it is sourced by +# F_USB after it has run through any CPU prescalers. Note that this value +# does not *change* the processor frequency - it should merely be updated to +# reflect the processor speed set externally so that the code can use accurate +# software delays. +F_CPU = 16000000 + + +# +# LUFA specific +# +# Target architecture (see library "Board Types" documentation). +ARCH = AVR8 + +# Input clock frequency. +# This will define a symbol, F_USB, in all source code files equal to the +# input clock frequency (before any prescaling is performed) in Hz. This value may +# differ from F_CPU if prescaling is used on the latter, and is required as the +# raw input clock is fed directly to the PLL sections of the AVR for high speed +# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' +# at the end, this will be done automatically to create a 32-bit value in your +# source code. +# +# If no clock division is performed on the input clock inside the AVR (via the +# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. +F_USB = $(F_CPU) + +# Interrupt driven control endpoint task(+60) +OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT + + +# Bootloader selection +# Teensy halfkay +# Pro Micro caterina +# Atmel DFU atmel-dfu +# LUFA DFU lufa-dfu +# QMK DFU qmk-dfu +# atmega32a bootloadHID +BOOTLOADER = atmel-dfu + + +# If you don't know the bootloader type, then you can specify the +# Boot Section Size in *bytes* by uncommenting out the OPT_DEFS line +# Teensy halfKay 512 +# Teensy++ halfKay 1024 +# Atmel DFU loader 4096 +# LUFA bootloader 4096 +# USBaspLoader 2048 +# OPT_DEFS += -DBOOTLOADER_SIZE=4096 + +RGB_MATRIX_ENABLE = WS2812 + + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = yes # Mouse keys(+4700) +EXTRAKEY_ENABLE = yes # Audio control and System control(+450) +CONSOLE_ENABLE = no # Console for debug(+400) +COMMAND_ENABLE = no # Commands for debug and configuration +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend +# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +NKRO_ENABLE = no # USB Nkey Rollover +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default +RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow +MIDI_ENABLE = no # MIDI support (+2400 to 4200, depending on config) +UNICODE_ENABLE = no # Unicode +BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID +AUDIO_ENABLE = no # Audio output on port C6 +FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches +HD44780_ENABLE = no # Enable support for HD44780 based LCDs (+400) From 4ecaa25f3e9ae1bd1b61bab52f6a46cbaf512ae8 Mon Sep 17 00:00:00 2001 From: XScorpion2 Date: Mon, 22 Apr 2019 10:14:57 -0500 Subject: [PATCH 163/171] forgot to update the define usage when 90 degree rotation was moved to a runtime switch (#5676) --- keyboards/zen/rev2/rev2.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/keyboards/zen/rev2/rev2.c b/keyboards/zen/rev2/rev2.c index 7bd8efbdd07..3f4a92c63d6 100644 --- a/keyboards/zen/rev2/rev2.c +++ b/keyboards/zen/rev2/rev2.c @@ -41,7 +41,7 @@ void render_status(void) { // Host Keyboard LED Status uint8_t led_usb_state = host_keyboard_leds(); - oled_set_cursor(0, OLED_MAX_LINES - 4); // Line 13 + oled_set_cursor(0, oled_max_lines() - 4); // Line 13 oled_write_P(led_usb_state & (1< Date: Tue, 23 Apr 2019 01:15:56 +1000 Subject: [PATCH 164/171] Atreus rules.mk and readme (#5678) * Update rules and readme to reflect new make usage. * Minor edit. * Minor edit. --- keyboards/atreus/readme.md | 21 +++++---- keyboards/atreus/rules.mk | 89 ++++++++++++++++++++------------------ 2 files changed, 60 insertions(+), 50 deletions(-) diff --git a/keyboards/atreus/readme.md b/keyboards/atreus/readme.md index 50901ee328a..5cd797da96f 100644 --- a/keyboards/atreus/readme.md +++ b/keyboards/atreus/readme.md @@ -1,21 +1,24 @@ Atreus -=== +====== A small mechanical keyboard that is based around the shape of the human hand. -These configuration files are specifically for the Atreus keyboards created by Phil Hagelberg (@technomancy). This keyboard is available in two variants: one powered by a Teensy 2, (usually hand-wired) one powered by an A-Star. (usually using a PCB) This repository currently assumes that you have an A-Star powered Atreus. If you are using a Teensy2, specify that by adding `TEENSY2=yes` to your `make` commands. - Keyboard Maintainer: [Phil Hagelberg](https://github.com/technomancy) Hardware Supported: Atreus, PCB-based or hand-wired Hardware Availability: https://atreus.technomancy.us -Make example for this keyboard (after setting up your build environment): +These configuration files are specifically for the Atreus keyboards created by Phil Hagelberg (@technomancy). This keyboard is available in two variants: one powered by a Teensy 2 (usually hand-wired), one powered by an A-Star (usually using a PCB). You will need to use different `make` commands depending on the variant you have; see examples below. - make atreus:default:avrdude +A-Star:\ +`make atreus:default:avrdude` -Unlike the TMK firmware, this command should be run from the root of -the repository, not the directory containing this readme. +Teensy:\ +`make TEENSY2=yes atreus:default:teensy` + +If your keyboard layout is a mirror image of what you expected (i.e. you do not get QWERTY on the left but YTREWQ on the right), then you have an A-Star powered Atreus (older than March 2016) with PCB labels facing *down* instead of up. Specify that by adding `PCBDOWN=yes` to your `make` commands, e.g. -If your keyboard layout is a mirror image of what you expected (i.e. you do not get QWERTY on the left but YTREWQ on the right), then you have an A-Star powered Atreus (older than March 2016) with PCB labels facing *down* instead of up. Specify that by adding `PCBDOWN=yes` to your `make` commands. +`make PCBDOWN=yes atreus:default:avrdude` -See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) then the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. +*Unlike the TMK firmware, these commands should be run from the root of the repository, not the directory containing this readme.* + +See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools), then the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. diff --git a/keyboards/atreus/rules.mk b/keyboards/atreus/rules.mk index 2488fd5e874..eda77404a02 100644 --- a/keyboards/atreus/rules.mk +++ b/keyboards/atreus/rules.mk @@ -1,19 +1,4 @@ - - -ifdef TEENSY2 - OPT_DEFS += -DATREUS_TEENSY2 - ATREUS_UPLOAD_COMMAND = teensy_loader_cli -w -mmcu=$(MCU) $(TARGET).hex -else - OPT_DEFS += -DATREUS_ASTAR -ifdef PCBDOWN - OPT_DEFS += -DPCBDOWN -endif - ATREUS_UPLOAD_COMMAND = while [ ! -r $(USB) ]; do sleep 1; done; \ - avrdude -p $(MCU) -c avr109 -U flash:w:$(TARGET).hex -P $(USB) -endif - # MCU name -#MCU = at90usb1287 MCU = atmega32u4 # Processor frequency. @@ -48,34 +33,56 @@ ARCH = AVR8 # CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. F_USB = $(F_CPU) -# Bootloader -# This definition is optional, and if your keyboard supports multiple bootloaders of -# different sizes, comment this out, and the correct address will be loaded -# automatically (+60). See bootloader.mk for all options. -ifdef TEENSY2 - BOOTLOADER = halfkay -else - BOOTLOADER = caterina -endif - # Interrupt driven control endpoint task(+60) OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT -# Build Options -# comment out to disable the options. -# -#BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000) -MOUSEKEY_ENABLE = yes # Mouse keys(+4700) -EXTRAKEY_ENABLE = yes # Audio control and System control(+450) -CONSOLE_ENABLE = yes # Console for debug(+400) -COMMAND_ENABLE = yes # Commands for debug and configuration -# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE -# SLEEP_LED_ENABLE = yes # Breathing sleep LED during USB suspend -NKRO_ENABLE = yes # USB Nkey Rollover - not yet supported in LUFA -# BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality -# MIDI_ENABLE = YES # MIDI controls -UNICODE_ENABLE = YES # Unicode -# BLUETOOTH_ENABLE = yes # Enable Bluetooth with the Adafruit EZ-Key HID +# Bootloader selection +# Teensy halfkay +# Pro Micro caterina +# Atmel DFU atmel-dfu +# LUFA DFU lufa-dfu +# QMK DFU qmk-dfu +# atmega32a bootloadHID +ifdef TEENSY2 + BOOTLOADER = halfkay + OPT_DEFS += -DATREUS_TEENSY2 +else + BOOTLOADER = caterina + OPT_DEFS += -DATREUS_ASTAR + ifdef PCBDOWN + OPT_DEFS += -DPCBDOWN + endif +endif -USB = /dev/cu.usbmodem1411 + +# If you don't know the bootloader type, then you can specify the +# Boot Section Size in *bytes* by uncommenting out the OPT_DEFS line +# Teensy halfKay 512 +# Teensy++ halfKay 1024 +# Atmel DFU loader 4096 +# LUFA bootloader 4096 +# USBaspLoader 2048 +# OPT_DEFS += -DBOOTLOADER_SIZE=4096 + + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = yes # Mouse keys(+4700) +EXTRAKEY_ENABLE = yes # Audio control and System control(+450) +CONSOLE_ENABLE = yes # Console for debug(+400) +COMMAND_ENABLE = yes # Commands for debug and configuration +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend +# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +NKRO_ENABLE = yes # USB Nkey Rollover +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default +RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow +MIDI_ENABLE = no # MIDI support (+2400 to 4200, depending on config) +UNICODE_ENABLE = yes # Unicode +BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID +AUDIO_ENABLE = no # Audio output on port C6 +FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches +HD44780_ENABLE = no # Enable support for HD44780 based LCDs (+400) From c7583d181a2cae24af60efa93caa3d662e5d48f4 Mon Sep 17 00:00:00 2001 From: Drashna Jaelre Date: Mon, 22 Apr 2019 08:25:21 -0700 Subject: [PATCH 165/171] Update handwired/frenchdev keyboard (#5443) --- keyboards/handwired/frenchdev/config.h | 5 +- keyboards/handwired/frenchdev/frenchdev.c | 54 +++-- keyboards/handwired/frenchdev/frenchdev.h | 8 +- keyboards/handwired/frenchdev/i2cmaster.h | 178 --------------- .../frenchdev/keymaps/default/keymap.c | 152 +++++-------- keyboards/handwired/frenchdev/matrix.c | 29 +-- keyboards/handwired/frenchdev/rules.mk | 6 +- keyboards/handwired/frenchdev/twimaster.c | 208 ------------------ 8 files changed, 115 insertions(+), 525 deletions(-) delete mode 100644 keyboards/handwired/frenchdev/i2cmaster.h delete mode 100644 keyboards/handwired/frenchdev/twimaster.c diff --git a/keyboards/handwired/frenchdev/config.h b/keyboards/handwired/frenchdev/config.h index b01eec7aa08..eca66909052 100644 --- a/keyboards/handwired/frenchdev/config.h +++ b/keyboards/handwired/frenchdev/config.h @@ -15,8 +15,7 @@ You should have received a copy of the GNU General Public License along with this program. If not, see . */ -#ifndef FRENCHDEV_V1_CONFIG_H -#define FRENCHDEV_V1_CONFIG_H +#pragma once #include "config_common.h" @@ -81,5 +80,3 @@ along with this program. If not, see . //#define NO_ACTION_MACRO //#define NO_ACTION_FUNCTION //#define DEBUG_MATRIX_SCAN_RATE - -#endif //FRENCHDEV_V1_CONFIG_H diff --git a/keyboards/handwired/frenchdev/frenchdev.c b/keyboards/handwired/frenchdev/frenchdev.c index 6d5883a3a82..6eed4de5ff0 100644 --- a/keyboards/handwired/frenchdev/frenchdev.c +++ b/keyboards/handwired/frenchdev/frenchdev.c @@ -1,5 +1,26 @@ #include "frenchdev.h" -#include "i2cmaster.h" + +extern inline void frenchdev_board_led_on(void); +extern inline void frenchdev_led_1_on(void); +extern inline void frenchdev_led_2_on(void); +extern inline void frenchdev_led_3_on(void); +extern inline void frenchdev_led_on(uint8_t led); + +extern inline void frenchdev_board_led_off(void); +extern inline void frenchdev_led_1_off(void); +extern inline void frenchdev_led_2_off(void); +extern inline void frenchdev_led_3_off(void); +extern inline void frenchdev_led_off(uint8_t led); + +extern inline void frenchdev_led_all_on(void); +extern inline void frenchdev_led_all_off(void); + +extern inline void frenchdev_led_1_set(uint8_t n); +extern inline void frenchdev_led_2_set(uint8_t n); +extern inline void frenchdev_led_3_set(uint8_t n); +extern inline void frenchdev_led_set(uint8_t led, uint8_t n); + +extern inline void frenchdev_led_all_set(uint8_t n); bool i2c_initialized = 0; uint8_t mcp23018_status = 0x20; @@ -31,15 +52,15 @@ void frenchdev_blink_all_leds(void) frenchdev_led_all_off(); frenchdev_led_all_set(LED_BRIGHTNESS_HI); frenchdev_led_1_on(); - _delay_ms(50); + wait_ms(50); frenchdev_led_2_on(); - _delay_ms(50); + wait_ms(50); frenchdev_led_3_on(); - _delay_ms(50); + wait_ms(50); frenchdev_led_1_off(); - _delay_ms(50); + wait_ms(50); frenchdev_led_2_off(); - _delay_ms(50); + wait_ms(50); frenchdev_led_3_off(); frenchdev_led_all_off(); } @@ -54,28 +75,28 @@ uint8_t init_mcp23018(void) { // cli(); if (i2c_initialized == 0) { i2c_init(); // on pins D(1,0) - i2c_initialized++; - _delay_ms(1000); + i2c_initialized = true;; + wait_ms(1000); } // set pin direction // - unused : input : 1 // - input : input : 1 // - driving : output : 0 - mcp23018_status = i2c_start(I2C_ADDR_WRITE); if (mcp23018_status) goto out; - mcp23018_status = i2c_write(IODIRA); if (mcp23018_status) goto out; - mcp23018_status = i2c_write(0b00000000); if (mcp23018_status) goto out; - mcp23018_status = i2c_write(0b00111111); if (mcp23018_status) goto out; + mcp23018_status = i2c_start(I2C_ADDR_WRITE, I2C_TIMEOUT); if (mcp23018_status) goto out; + mcp23018_status = i2c_write(IODIRA, I2C_TIMEOUT); if (mcp23018_status) goto out; + mcp23018_status = i2c_write(0b00000000, I2C_TIMEOUT); if (mcp23018_status) goto out; + mcp23018_status = i2c_write(0b00111111, I2C_TIMEOUT); if (mcp23018_status) goto out; i2c_stop(); // set pull-up // - unused : on : 1 // - input : on : 1 // - driving : off : 0 - mcp23018_status = i2c_start(I2C_ADDR_WRITE); if (mcp23018_status) goto out; - mcp23018_status = i2c_write(GPPUA); if (mcp23018_status) goto out; - mcp23018_status = i2c_write(0b00000000); if (mcp23018_status) goto out; - mcp23018_status = i2c_write(0b00111111); if (mcp23018_status) goto out; + mcp23018_status = i2c_start(I2C_ADDR_WRITE, I2C_TIMEOUT); if (mcp23018_status) goto out; + mcp23018_status = i2c_write(GPPUA, I2C_TIMEOUT); if (mcp23018_status) goto out; + mcp23018_status = i2c_write(0b00000000, I2C_TIMEOUT); if (mcp23018_status) goto out; + mcp23018_status = i2c_write(0b00111111, I2C_TIMEOUT); if (mcp23018_status) goto out; out: i2c_stop(); @@ -84,4 +105,3 @@ out: return mcp23018_status; } - diff --git a/keyboards/handwired/frenchdev/frenchdev.h b/keyboards/handwired/frenchdev/frenchdev.h index 82dbe18b89f..1df39908879 100644 --- a/keyboards/handwired/frenchdev/frenchdev.h +++ b/keyboards/handwired/frenchdev/frenchdev.h @@ -1,10 +1,9 @@ -#ifndef FRENCHDEV_V1_H -#define FRENCHDEV_V1_H +#pragma once #include "quantum.h" #include #include -#include "i2cmaster.h" +#include "i2c_master.h" #include #define CPU_PRESCALE(n) (CLKPR = 0x80, CLKPR = (n)) @@ -24,6 +23,7 @@ #define OLATB 0x15 extern uint8_t mcp23018_status; +#define I2C_TIMEOUT 100 void init_frenchdev(void); void frenchdev_blink_all_leds(void); @@ -111,5 +111,3 @@ inline void frenchdev_led_all_set(uint8_t n) { k51, k41, k31, k21, k11, k01 }, \ { k50, k40, k30, k20, k10, KC_NO } \ } - -#endif diff --git a/keyboards/handwired/frenchdev/i2cmaster.h b/keyboards/handwired/frenchdev/i2cmaster.h deleted file mode 100644 index 3917b9e6c00..00000000000 --- a/keyboards/handwired/frenchdev/i2cmaster.h +++ /dev/null @@ -1,178 +0,0 @@ -#ifndef _I2CMASTER_H -#define _I2CMASTER_H 1 -/************************************************************************* -* Title: C include file for the I2C master interface -* (i2cmaster.S or twimaster.c) -* Author: Peter Fleury http://jump.to/fleury -* File: $Id: i2cmaster.h,v 1.10 2005/03/06 22:39:57 Peter Exp $ -* Software: AVR-GCC 3.4.3 / avr-libc 1.2.3 -* Target: any AVR device -* Usage: see Doxygen manual -**************************************************************************/ - -#ifdef DOXYGEN -/** - @defgroup pfleury_ic2master I2C Master library - @code #include @endcode - - @brief I2C (TWI) Master Software Library - - Basic routines for communicating with I2C slave devices. This single master - implementation is limited to one bus master on the I2C bus. - - This I2c library is implemented as a compact assembler software implementation of the I2C protocol - which runs on any AVR (i2cmaster.S) and as a TWI hardware interface for all AVR with built-in TWI hardware (twimaster.c). - Since the API for these two implementations is exactly the same, an application can be linked either against the - software I2C implementation or the hardware I2C implementation. - - Use 4.7k pull-up resistor on the SDA and SCL pin. - - Adapt the SCL and SDA port and pin definitions and eventually the delay routine in the module - i2cmaster.S to your target when using the software I2C implementation ! - - Adjust the CPU clock frequence F_CPU in twimaster.c or in the Makfile when using the TWI hardware implementaion. - - @note - The module i2cmaster.S is based on the Atmel Application Note AVR300, corrected and adapted - to GNU assembler and AVR-GCC C call interface. - Replaced the incorrect quarter period delays found in AVR300 with - half period delays. - - @author Peter Fleury pfleury@gmx.ch http://jump.to/fleury - - @par API Usage Example - The following code shows typical usage of this library, see example test_i2cmaster.c - - @code - - #include - - - #define Dev24C02 0xA2 // device address of EEPROM 24C02, see datasheet - - int main(void) - { - unsigned char ret; - - i2c_init(); // initialize I2C library - - // write 0x75 to EEPROM address 5 (Byte Write) - i2c_start_wait(Dev24C02+I2C_WRITE); // set device address and write mode - i2c_write(0x05); // write address = 5 - i2c_write(0x75); // write value 0x75 to EEPROM - i2c_stop(); // set stop conditon = release bus - - - // read previously written value back from EEPROM address 5 - i2c_start_wait(Dev24C02+I2C_WRITE); // set device address and write mode - - i2c_write(0x05); // write address = 5 - i2c_rep_start(Dev24C02+I2C_READ); // set device address and read mode - - ret = i2c_readNak(); // read one byte from EEPROM - i2c_stop(); - - for(;;); - } - @endcode - -*/ -#endif /* DOXYGEN */ - -/**@{*/ - -#if (__GNUC__ * 100 + __GNUC_MINOR__) < 304 -#error "This library requires AVR-GCC 3.4 or later, update to newer AVR-GCC compiler !" -#endif - -#include - -/** defines the data direction (reading from I2C device) in i2c_start(),i2c_rep_start() */ -#define I2C_READ 1 - -/** defines the data direction (writing to I2C device) in i2c_start(),i2c_rep_start() */ -#define I2C_WRITE 0 - - -/** - @brief initialize the I2C master interace. Need to be called only once - @param void - @return none - */ -extern void i2c_init(void); - - -/** - @brief Terminates the data transfer and releases the I2C bus - @param void - @return none - */ -extern void i2c_stop(void); - - -/** - @brief Issues a start condition and sends address and transfer direction - - @param addr address and transfer direction of I2C device - @retval 0 device accessible - @retval 1 failed to access device - */ -extern unsigned char i2c_start(unsigned char addr); - - -/** - @brief Issues a repeated start condition and sends address and transfer direction - - @param addr address and transfer direction of I2C device - @retval 0 device accessible - @retval 1 failed to access device - */ -extern unsigned char i2c_rep_start(unsigned char addr); - - -/** - @brief Issues a start condition and sends address and transfer direction - - If device is busy, use ack polling to wait until device ready - @param addr address and transfer direction of I2C device - @return none - */ -extern void i2c_start_wait(unsigned char addr); - - -/** - @brief Send one byte to I2C device - @param data byte to be transfered - @retval 0 write successful - @retval 1 write failed - */ -extern unsigned char i2c_write(unsigned char data); - - -/** - @brief read one byte from the I2C device, request more data from device - @return byte read from I2C device - */ -extern unsigned char i2c_readAck(void); - -/** - @brief read one byte from the I2C device, read is followed by a stop condition - @return byte read from I2C device - */ -extern unsigned char i2c_readNak(void); - -/** - @brief read one byte from the I2C device - - Implemented as a macro, which calls either i2c_readAck or i2c_readNak - - @param ack 1 send ack, request more data from device
- 0 send nak, read is followed by a stop condition - @return byte read from I2C device - */ -extern unsigned char i2c_read(unsigned char ack); -#define i2c_read(ack) (ack) ? i2c_readAck() : i2c_readNak(); - - -/**@}*/ -#endif diff --git a/keyboards/handwired/frenchdev/keymaps/default/keymap.c b/keyboards/handwired/frenchdev/keymaps/default/keymap.c index 506383a1bba..7b82f36e360 100644 --- a/keyboards/handwired/frenchdev/keymaps/default/keymap.c +++ b/keyboards/handwired/frenchdev/keymaps/default/keymap.c @@ -1,5 +1,4 @@ #include QMK_KEYBOARD_H -#include "mousekey.h" #include "keymap_bepo.h" @@ -14,7 +13,7 @@ #define KEY_DELAY 130 enum macros { - M_LP, // left pedal + M_LP = SAFE_RANGE, // left pedal M_RP, // right pedal M_SF, // shift M_SFS, // shift and space @@ -63,19 +62,18 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { * |------+------| / |------| , | space|------|------|------ .. ------|------|------| L1/sp| LEFT |------| UP |------+------| * * | CTRL | win |------/ \-------------| L1 | alt | .. | CAPS | L1 |-------------/ \------| : | CTRL | * * `-------------/ \-------------/ .. \-------------/ \-------------/ * - *M(M_LP) */ [_BASE] = LAYOUT( KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, \ KC_ESC, BP_DQOT, BP_LGIL, BP_RGIL, BP_LPRN, BP_RPRN, BP_DTRM, BP_DCRC, BP_AT, BP_PLUS, BP_MINS, BP_SLSH, BP_ASTR, KC_BSPC, \ KC_TAB, BP_B, BP_ECUT, BP_O, BP_P, BP_EGRV, BP_UNDS, BP_EQL, BP_K, BP_V, BP_D, BP_L, BP_J, KC_ENT, \ BP_GRV, BP_A, BP_U, BP_E, BP_I, BP_F, BP_SCLN, BP_EXLM, BP_C, BP_T, BP_S, BP_R, BP_N, BP_APOS, \ - M(M_SF), BP_Z, BP_AGRV, BP_Y, BP_X, KC_RBRACKET, M(M_SFS), BP_CBSP, M(L2INS), M(L2LOC), BP_CDEL, M(M_SFS),BP_M, BP_G, KC_UP, BP_H, BP_Q, M(M_SF), \ - KC_LCTL, KC_LGUI, KC_PSLS, BP_DOT, BP_COMM, KC_SPACE,M(M_L1E), KC_LALT, KC_CAPS, M(M_L1E),KC_SPACE,KC_LEFT, KC_DOWN, KC_RIGHT,BP_COLN, KC_RCTL, \ + M_SF, BP_Z, BP_AGRV, BP_Y, BP_X, KC_RBRC, M_SFS, BP_CBSP, L2INS, L2LOC, BP_CDEL, M_SFS, BP_M, BP_G, KC_UP, BP_H, BP_Q, M_SF, \ + KC_LCTL, KC_LGUI, KC_PSLS, BP_DOT, BP_COMM, KC_SPACE,M_L1E, KC_LALT, KC_CAPS, M_L1E, KC_SPACE, KC_LEFT, KC_DOWN, KC_RIGHT,BP_COLN, KC_RCTL, \ //left pedals - M(M_LP), M(M_RP), KC_TRNS, \ + M_LP, M_RP, KC_TRNS, \ //right pedals - M(M_LP), M(M_RP), KC_TRNS \ + M_LP, M_RP, KC_TRNS \ ), /* Larer 1 for symbols. @@ -102,7 +100,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { KC_TRNS, BP_DCUR, BP_PARG, BP_SECT, BP_DGRK, KC_TRNS, BP_TILD, BP_DCAR, BP_LEQL, BP_GEQL, BP_PSMS, BP_OBEL, BP_TIMS, KC_TRNS, \ KC_TRNS, BP_BSLS, BP_ASTR, BP_LCBR, BP_RCBR, BP_GRV, KC_TRNS, BP_DIFF, BP_HASH, BP_LBRC, BP_RBRC, BP_PERC, BP_PMIL, KC_TRNS, \ KC_TRNS, BP_EQL, BP_UGRV, BP_LPRN, BP_RPRN, BP_PLUS, BP_COLN, BP_QEST, BP_CCED, BP_LESS, BP_GRTR, BP_AMPR, BP_UNDS, KC_TRNS, \ - KC_TRNS, M(M_UN), M(M_CUT),M(M_CP), M(M_PS), M(M_SE), KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, BP_DLR, BP_EQL, KC_PGUP, BP_PIPE, BP_SLSH, KC_TRNS, \ + KC_TRNS, M_UN, M_CUT, M_CP, M_PS, M_SE, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, BP_DLR, BP_EQL, KC_PGUP, BP_PIPE, BP_SLSH, KC_TRNS, \ KC_TRNS, KC_TRNS, BP_BSLS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_HOME, KC_PGDN, KC_END, KC_TRNS, KC_TRNS, \ //left pedals KC_TRNS, KC_BTN1, KC_TRNS, \ @@ -134,12 +132,12 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { KC_TRNS, KC_TRNS, KC_TRNS, KC_MSTP, KC_MPRV, KC_MNXT, KC_MPLY, KC_MPLY, KC_MPRV, KC_MNXT, KC_MSTP, KC_TRNS, KC_PMNS, KC_TRNS, \ KC_TRNS, KC_TRNS, KC_TRNS, KC_WH_U, KC_TRNS, KC_BTN4, KC_BTN5, KC_BTN4, KC_BTN5, KC_KP_7, KC_KP_8, KC_KP_9, KC_PPLS, KC_TRNS, \ KC_TRNS, KC_TRNS, KC_TRNS, KC_WH_D, KC_BTN3, KC_BTN2, KC_BTN1, KC_BTN1, KC_BTN2, KC_KP_4, KC_KP_5, KC_KP_6, KC_PAST, KC_TRNS, \ - KC_TRNS, M(M_UN), M(M_CUT),M(M_CP), M(M_PS), KC_BTN3, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_BTN3, KC_KP_1, KC_KP_2, KC_KP_3, KC_PSLS, KC_TRNS, \ + KC_TRNS, M_UN, M_CUT, M_CP, M_PS, KC_BTN3, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_BTN3, KC_KP_1, KC_KP_2, KC_KP_3, KC_PSLS, KC_TRNS, \ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_KP_0, KC_PDOT, BP_DOT, BP_COMM, KC_TRNS, \ //left pedals - KC_BTN3, M(M_RP), KC_TRNS, \ + KC_BTN3, M_RP, KC_TRNS, \ //right pedals - KC_BTN3, M(M_RP), KC_TRNS \ + KC_BTN3, M_RP, KC_TRNS \ ), /* TRNS - skeleton for laters @@ -169,9 +167,9 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \ //left pedals - KC_BTN3, M(M_RP), KC_TRNS, \ + KC_BTN3, M_RP, KC_TRNS, \ //right pedals - KC_BTN3, M(M_RP), KC_TRNS \ + KC_BTN3, M_RP, KC_TRNS \ ), }; @@ -191,28 +189,52 @@ void release_shift(void) { void press_space(void) { if(shift_count > 0) unregister_code (KC_LSHIFT); - register_code (KC_SPACE); - unregister_code (KC_SPACE); + tap_code(KC_SPACE); if(shift_count > 0) register_code (KC_LSHIFT); } void press_enter(void) { if(shift_count > 0) unregister_code (KC_LSHIFT); - register_code (KC_ENT); - unregister_code (KC_ENT); + tap_code (KC_ENT); if(shift_count > 0) register_code (KC_LSHIFT); } void press_underscore(void) { if(shift_count > 0) unregister_code (KC_LSHIFT); - register_code ((unsigned char) BP_UNDS); - unregister_code ((unsigned char) BP_UNDS); + tap_code ((unsigned char) BP_UNDS); if(shift_count > 0) register_code (KC_LSHIFT); } -const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) -{ - switch(id) { +void matrix_init_user(void) { +} + +// Bleah globals need to be initialized. +uint8_t old_layer=_BASE; + +void matrix_scan_user(void) { + uint8_t layer = biton32(layer_state); + + frenchdev_led_1_off(); + frenchdev_led_2_off(); + switch (layer) { + case _BASE: + frenchdev_led_2_on(); + break; + case _SYMBOLS: + frenchdev_led_1_on(); + break; + case _MEDIA: + frenchdev_led_1_on(); + frenchdev_led_2_on(); + default: + // none + break; + } +} + + +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + switch(keycode) { case M_LP: //left pedal if (record->event.pressed) { layer_on(1); @@ -220,25 +242,19 @@ const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) key_timer_left_pedal = timer_read(); // if the key is being pressed, we start the timer. } else { if (timer_elapsed(key_timer_left_pedal) < KEY_DELAY) { - mousekey_on (KC_BTN2); - mousekey_send(); - mousekey_off (KC_BTN2); - mousekey_send(); + tap_code (KC_BTN2); } unregister_code (KC_SLCK); layer_off(1); } - break; + break; case M_RP: //right pedal if (record->event.pressed) { layer_on(2); key_timer_right_pedal = timer_read(); // if the key is being pressed, we start the timer. } else { if (timer_elapsed(key_timer_right_pedal) < PEDAL_DELAY) { - mousekey_on (KC_BTN1); - mousekey_send(); - mousekey_off (KC_BTN1); - mousekey_send(); + tap_code (KC_BTN1); } layer_off(2); } @@ -289,13 +305,12 @@ const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) key_timer_2 = timer_read(); // if the key is being pressed, we start the timer. } else { if (timer_elapsed(key_timer_2) < KEY_DELAY) { - register_code (KC_INS); - unregister_code (KC_INS); + tap_code (KC_INS); } l2_locked = 0; layer_off(2); } - break; + break; case L2LOC: //lock L2 if (record->event.pressed) { key_timer_2 = timer_read(); // if the key is being pressed, we start the timer. @@ -309,80 +324,33 @@ const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) layer_off(2); } } - break; + break; case M_UN: // undo if (record->event.pressed) { - register_code(KC_LCTL); - register_code(BP_Z); - unregister_code(BP_Z); - unregister_code(KC_LCTL); + tap_code16(C(BP_Z)); } - break; + break; case M_CUT: // cut if (record->event.pressed) { - register_code(KC_LCTL); - register_code(BP_X); - unregister_code(BP_X); - unregister_code(KC_LCTL); + tap_code16(C(BP_X)); } - break; + break; case M_CP: // copy if (record->event.pressed) { - register_code(KC_LCTL); - register_code(BP_C); - unregister_code(BP_C); - unregister_code(KC_LCTL); + tap_code16(C(BP_C)); } - break; + break; case M_PS: // paste if (record->event.pressed) { - register_code(KC_LCTL); - register_code(BP_V); - unregister_code(BP_V); - unregister_code(KC_LCTL); + tap_code16(C(BP_V)); } - break; + break; case M_SE: // search if (record->event.pressed) { - register_code(KC_LCTL); - register_code(BP_F); - unregister_code(BP_F); - unregister_code(KC_LCTL); + tap_code16(C(BP_F)); } - break; + break; } - return MACRO_NONE; -}; - -void matrix_init_user(void) { -} - -// Bleah globals need to be initialized. -uint8_t old_layer=_BASE; - -void matrix_scan_user(void) { - uint8_t layer = biton32(layer_state); - - frenchdev_led_1_off(); - frenchdev_led_2_off(); - switch (layer) { - case _BASE: - frenchdev_led_2_on(); - break; - case _SYMBOLS: - frenchdev_led_1_on(); - break; - case _MEDIA: - frenchdev_led_1_on(); - frenchdev_led_2_on(); - default: - // none - break; - } -} - - -bool process_record_user(uint16_t keycode, keyrecord_t *record) { return true; } diff --git a/keyboards/handwired/frenchdev/matrix.c b/keyboards/handwired/frenchdev/matrix.c index 7fe3d0bbf24..4263555e951 100644 --- a/keyboards/handwired/frenchdev/matrix.c +++ b/keyboards/handwired/frenchdev/matrix.c @@ -40,7 +40,6 @@ along with this program. If not, see . #include "util.h" #include "matrix.h" #include "frenchdev.h" -#include "i2cmaster.h" #ifdef DEBUG_MATRIX_SCAN_RATE #include "timer.h" #endif @@ -280,11 +279,12 @@ static matrix_row_t read_cols(uint8_t row) return 0; } else { uint8_t data = 0; - mcp23018_status = i2c_start(I2C_ADDR_WRITE); if (mcp23018_status) goto out; - mcp23018_status = i2c_write(GPIOB); if (mcp23018_status) goto out; - mcp23018_status = i2c_start(I2C_ADDR_READ); if (mcp23018_status) goto out; - data = i2c_readNak(); - data = ~data; + mcp23018_status = i2c_start(I2C_ADDR_WRITE, I2C_TIMEOUT); if (mcp23018_status) goto out; + mcp23018_status = i2c_write(GPIOB, I2C_TIMEOUT); if (mcp23018_status) goto out; + mcp23018_status = i2c_start(I2C_ADDR_READ, I2C_TIMEOUT); if (mcp23018_status) goto out; + data = i2c_read_nack(I2C_TIMEOUT); if (mcp23018_status < 0) goto out; + data = ~((uint8_t)mcp23018_status); + mcp23018_status = I2C_STATUS_SUCCESS; out: i2c_stop(); return data; @@ -318,11 +318,9 @@ static void unselect_rows(void) // do nothing } else { // set all rows hi-Z : 1 - mcp23018_status = i2c_start(I2C_ADDR_WRITE); if (mcp23018_status) goto out; - mcp23018_status = i2c_write(GPIOA); if (mcp23018_status) goto out; - mcp23018_status = i2c_write( 0xFF - & ~(0<<8) - ); if (mcp23018_status) goto out; + mcp23018_status = i2c_start(I2C_ADDR_WRITE, I2C_TIMEOUT); if (mcp23018_status) goto out; + mcp23018_status = i2c_write(GPIOA, I2C_TIMEOUT); if (mcp23018_status) goto out; + mcp23018_status = i2c_write( 0xFF & ~(0<<8), I2C_TIMEOUT); if (mcp23018_status) goto out; out: i2c_stop(); } @@ -346,11 +344,9 @@ static void select_row(uint8_t row) } else { // set active row low : 0 // set other rows hi-Z : 1 - mcp23018_status = i2c_start(I2C_ADDR_WRITE); if (mcp23018_status) goto out; - mcp23018_status = i2c_write(GPIOA); if (mcp23018_status) goto out; - mcp23018_status = i2c_write( 0xFF & ~(1< http://jump.to/fleury -* File: $Id: twimaster.c,v 1.3 2005/07/02 11:14:21 Peter Exp $ -* Software: AVR-GCC 3.4.3 / avr-libc 1.2.3 -* Target: any AVR device with hardware TWI -* Usage: API compatible with I2C Software Library i2cmaster.h -**************************************************************************/ -#include -#include - -#include - - -/* define CPU frequency in Mhz here if not defined in Makefile */ -#ifndef F_CPU -#define F_CPU 16000000UL -#endif - -/* I2C clock in Hz */ -#define SCL_CLOCK 400000L - - -/************************************************************************* - Initialization of the I2C bus interface. Need to be called only once -*************************************************************************/ -void i2c_init(void) -{ - /* initialize TWI clock - * minimal values in Bit Rate Register (TWBR) and minimal Prescaler - * bits in the TWI Status Register should give us maximal possible - * I2C bus speed - about 444 kHz - * - * for more details, see 20.5.2 in ATmega16/32 secification - */ - - TWSR = 0; /* no prescaler */ - TWBR = 10; /* must be >= 10 for stable operation */ - -}/* i2c_init */ - - -/************************************************************************* - Issues a start condition and sends address and transfer direction. - return 0 = device accessible, 1= failed to access device -*************************************************************************/ -unsigned char i2c_start(unsigned char address) -{ - uint8_t twst; - - // send START condition - TWCR = (1< Date: Mon, 22 Apr 2019 17:26:41 +0200 Subject: [PATCH 166/171] Define RGB colors (#5300) * Define RGB colors Define RGB colors and pass them to the rgblight functions, instead of defining multiple macros. * Add new color definitions support for RGB Matrix * Add/clarify info about new color definitions in Docs * Add deprecation warning banner to rgblight_list.h --- docs/feature_rgb_matrix.md | 29 +++++ docs/feature_rgblight.md | 35 +++++- quantum/rgb_matrix.h | 1 + quantum/rgblight_list.h | 240 ++++++++++++++++++++++--------------- 4 files changed, 210 insertions(+), 95 deletions(-) diff --git a/docs/feature_rgb_matrix.md b/docs/feature_rgb_matrix.md index acef4717dde..5309e749cb7 100644 --- a/docs/feature_rgb_matrix.md +++ b/docs/feature_rgb_matrix.md @@ -236,6 +236,35 @@ void rgb_matrix_indicators_kb(void) { A similar function works in the keymap as `rgb_matrix_indicators_user`. + +## Colors + +These are shorthands to popular colors. The `RGB` ones can be passed to the `setrgb` functions, while the `HSV` ones to the `sethsv` functions. + +|RGB |HSV | +|-------------------|-------------------| +|`RGB_WHITE` |`HSV_WHITE` | +|`RGB_RED` |`HSV_RED` | +|`RGB_CORAL` |`HSV_CORAL` | +|`RGB_ORANGE` |`HSV_ORANGE` | +|`RGB_GOLDENROD` |`HSV_GOLDENROD` | +|`RGB_GOLD` |`HSV_GOLD` | +|`RGB_YELLOW` |`HSV_YELLOW` | +|`RGB_CHARTREUSE` |`HSV_CHARTREUSE` | +|`RGB_GREEN` |`HSV_GREEN` | +|`RGB_SPRINGGREEN` |`HSV_SPRINGGREEN` | +|`RGB_TURQUOISE` |`HSV_TURQUOISE` | +|`RGB_TEAL` |`HSV_TEAL` | +|`RGB_CYAN` |`HSV_CYAN` | +|`RGB_AZURE` |`HSV_AZURE` | +|`RGB_BLUE` |`HSV_BLUE` | +|`RGB_PURPLE` |`HSV_PURPLE` | +|`RGB_MAGENTA` |`HSV_MAGENTA` | +|`RGB_PINK` |`HSV_PINK` | + +These are defined in [`rgblight_list.h`](https://github.com/qmk/qmk_firmware/blob/master/quantum/rgblight_list.h). Feel free to add to this list! + + ## Additional `config.h` Options ```C diff --git a/docs/feature_rgblight.md b/docs/feature_rgblight.md index 97a99599468..48277373a51 100644 --- a/docs/feature_rgblight.md +++ b/docs/feature_rgblight.md @@ -191,7 +191,40 @@ If you need to change your RGB lighting in code, for example in a macro to chang |`rgblight_decrease_val_noeeprom()` |Decrease the value for all LEDs. This wraps around at minimum value (not written to EEPROM) | |`rgblight_set_clipping_range(pos, num)` |Set clipping Range | -Additionally, [`rgblight_list.h`](https://github.com/qmk/qmk_firmware/blob/master/quantum/rgblight_list.h) defines several predefined shortcuts for various colors. Feel free to add to this list! +## Colors + +These are shorthands to popular colors. The `RGB` ones can be passed to the `setrgb` functions, while the `HSV` ones to the `sethsv` functions. + +|RGB |HSV | +|-------------------|-------------------| +|`RGB_WHITE` |`HSV_WHITE` | +|`RGB_RED` |`HSV_RED` | +|`RGB_CORAL` |`HSV_CORAL` | +|`RGB_ORANGE` |`HSV_ORANGE` | +|`RGB_GOLDENROD` |`HSV_GOLDENROD` | +|`RGB_GOLD` |`HSV_GOLD` | +|`RGB_YELLOW` |`HSV_YELLOW` | +|`RGB_CHARTREUSE` |`HSV_CHARTREUSE` | +|`RGB_GREEN` |`HSV_GREEN` | +|`RGB_SPRINGGREEN` |`HSV_SPRINGGREEN` | +|`RGB_TURQUOISE` |`HSV_TURQUOISE` | +|`RGB_TEAL` |`HSV_TEAL` | +|`RGB_CYAN` |`HSV_CYAN` | +|`RGB_AZURE` |`HSV_AZURE` | +|`RGB_BLUE` |`HSV_BLUE` | +|`RGB_PURPLE` |`HSV_PURPLE` | +|`RGB_MAGENTA` |`HSV_MAGENTA` | +|`RGB_PINK` |`HSV_PINK` | + +```c +rgblight_setrgb(RGB_ORANGE); +rgblight_sethsv_noeeprom(HSV_GREEN); +rgblight_setrgb_at(RGB_GOLD, 3); +rgblight_sethsv_range(HSV_WHITE, 0, 6); +``` + +These are defined in [`rgblight_list.h`](https://github.com/qmk/qmk_firmware/blob/master/quantum/rgblight_list.h). Feel free to add to this list! + ## Changing the order of the LEDs diff --git a/quantum/rgb_matrix.h b/quantum/rgb_matrix.h index 0a11f269205..f5be494354f 100644 --- a/quantum/rgb_matrix.h +++ b/quantum/rgb_matrix.h @@ -24,6 +24,7 @@ #include "rgb_matrix_types.h" #include "color.h" #include "quantum.h" +#include "rgblight_list.h" #ifdef IS31FL3731 #include "is31fl3731.h" diff --git a/quantum/rgblight_list.h b/quantum/rgblight_list.h index 407fd8e9d31..7b831338087 100644 --- a/quantum/rgblight_list.h +++ b/quantum/rgblight_list.h @@ -13,111 +13,163 @@ * You should have received a copy of the GNU General Public License * along with this program. If not, see . */ -#ifndef RGBLIGHT_LIST_H -#define RGBLIGHT_LIST_H +#pragma once + +/* RGB COLORS */ +#define RGB_WHITE 0xFF, 0xFF, 0xFF +#define RGB_RED 0xFF, 0x00, 0x00 +#define RGB_CORAL 0xFF, 0x7C, 0x4D +#define RGB_ORANGE 0xFF, 0x80, 0x00 +#define RGB_GOLDENROD 0xD9, 0xA5, 0x21 +#define RGB_GOLD 0xFF, 0xD9, 0x00 +#define RGB_YELLOW 0xFF, 0xFF, 0x00 +#define RGB_CHARTREUSE 0x80, 0xFF, 0x00 +#define RGB_GREEN 0x00, 0xFF, 0x00 +#define RGB_SPRINGGREEN 0x00, 0xFF, 0x80 +#define RGB_TURQUOISE 0x47, 0x6E, 0x6A +#define RGB_TEAL 0x00, 0x80, 0x80 +#define RGB_CYAN 0x00, 0xFF, 0xFF +#define RGB_AZURE 0x99, 0xf5, 0xFF +#define RGB_BLUE 0x00, 0x00, 0xFF +#define RGB_PURPLE 0x7A, 0x00, 0xFF +#define RGB_MAGENTA 0xFF, 0x00, 0xFF +#define RGB_PINK 0xFF, 0x80, 0xBF + +/* HSV COLORS */ +#define HSV_WHITE 0, 0, 255 +#define HSV_RED 0, 255, 255 +#define HSV_CORAL 16, 176, 255 +#define HSV_ORANGE 39, 255, 255 +#define HSV_GOLDENROD 43, 218, 218 +#define HSV_GOLD 51, 255, 255 +#define HSV_YELLOW 60, 255, 255 +#define HSV_CHARTREUSE 90, 255, 255 +#define HSV_GREEN 120, 255, 255 +#define HSV_SPRINGGREEN 150, 255, 255 +#define HSV_TURQUOISE 174, 90, 112 +#define HSV_TEAL 180, 255, 128 +#define HSV_CYAN 180, 255, 255 +#define HSV_AZURE 186, 102, 255 +#define HSV_BLUE 240, 255, 255 +#define HSV_PURPLE 270, 255, 255 +#define HSV_MAGENTA 300, 255, 255 +#define HSV_PINK 330, 128, 255 + + +/* +######################################################################################## +## ## +## ## +## ## +## The functions below have been deprecated and may be removed in a future release. ## +## ## +## Please use the values above with the RGB functions. ## +## ## +## ## +## ## +######################################################################################## +*/ /* SET RGB List */ -#define rgblight_setrgb_white() rgblight_setrgb (0xFF, 0xFF, 0xFF) -#define rgblight_setrgb_red() rgblight_setrgb (0xFF, 0x00, 0x00) -#define rgblight_setrgb_coral() rgblight_setrgb (0xFF, 0x7C, 0x4D) -#define rgblight_setrgb_orange() rgblight_setrgb (0xFF, 0x80, 0x00) -#define rgblight_setrgb_goldenrod() rgblight_setrgb (0xD9, 0xA5, 0x21) -#define rgblight_setrgb_gold() rgblight_setrgb (0xFF, 0xD9, 0x00) -#define rgblight_setrgb_yellow() rgblight_setrgb (0xFF, 0xFF, 0x00) -#define rgblight_setrgb_chartreuse() rgblight_setrgb (0x80, 0xFF, 0x00) -#define rgblight_setrgb_green() rgblight_setrgb (0x00, 0xFF, 0x00) -#define rgblight_setrgb_springgreen() rgblight_setrgb (0x00, 0xFF, 0x80) -#define rgblight_setrgb_turquoise() rgblight_setrgb (0x47, 0x6E, 0x6A) -#define rgblight_setrgb_teal() rgblight_setrgb (0x00, 0x80, 0x80) -#define rgblight_setrgb_cyan() rgblight_setrgb (0x00, 0xFF, 0xFF) -#define rgblight_setrgb_azure() rgblight_setrgb (0x99, 0xf5, 0xFF) -#define rgblight_setrgb_blue() rgblight_setrgb (0x00, 0x00, 0xFF) -#define rgblight_setrgb_purple() rgblight_setrgb (0x7A, 0x00, 0xFF) -#define rgblight_setrgb_magenta() rgblight_setrgb (0xFF, 0x00, 0xFF) -#define rgblight_setrgb_pink() rgblight_setrgb (0xFF, 0x80, 0xBF) +#define rgblight_setrgb_white() rgblight_setrgb (RGB_WHITE) +#define rgblight_setrgb_red() rgblight_setrgb (RGB_RED) +#define rgblight_setrgb_coral() rgblight_setrgb (RGB_CORAL) +#define rgblight_setrgb_orange() rgblight_setrgb (RGB_ORANGE) +#define rgblight_setrgb_goldenrod() rgblight_setrgb (RGB_GOLDENROD) +#define rgblight_setrgb_gold() rgblight_setrgb (RGB_GOLD) +#define rgblight_setrgb_yellow() rgblight_setrgb (RGB_YEllOW) +#define rgblight_setrgb_chartreuse() rgblight_setrgb (RGB_CHARTREUSE) +#define rgblight_setrgb_green() rgblight_setrgb (RGB_GREEN) +#define rgblight_setrgb_springgreen() rgblight_setrgb (RGB_SPRINGGREEN) +#define rgblight_setrgb_turquoise() rgblight_setrgb (RGB_TURQUOISE) +#define rgblight_setrgb_teal() rgblight_setrgb (RGB_TEAL) +#define rgblight_setrgb_cyan() rgblight_setrgb (RGB_CYAN) +#define rgblight_setrgb_azure() rgblight_setrgb (RGB_AZURE) +#define rgblight_setrgb_blue() rgblight_setrgb (RGB_BLUE) +#define rgblight_setrgb_purple() rgblight_setrgb (RGB_PURPLE) +#define rgblight_setrgb_magenta() rgblight_setrgb (RGB_MAGENTA) +#define rgblight_setrgb_pink() rgblight_setrgb (RGB_PINK) /* SET RGB List */ -#define rgblight_setrgb_white_at(at) rgblight_setrgb_at (0xFF, 0xFF, 0xFF, at) -#define rgblight_setrgb_red_at(at) rgblight_setrgb_at (0xFF, 0x00, 0x00, at) -#define rgblight_setrgb_coral_at(at) rgblight_setrgb_at (0xFF, 0x7C, 0x4D, at) -#define rgblight_setrgb_orange_at(at) rgblight_setrgb_at (0xFF, 0x80, 0x00, at) -#define rgblight_setrgb_goldenrod_at(at) rgblight_setrgb_at (0xD9, 0xA5, 0x21, at) -#define rgblight_setrgb_gold_at(at) rgblight_setrgb_at (0xFF, 0xD9, 0x00, at) -#define rgblight_setrgb_yellow_at(at) rgblight_setrgb_at (0xFF, 0xFF, 0x00, at) -#define rgblight_setrgb_chartreuse_at(at) rgblight_setrgb_at (0x80, 0xFF, 0x00, at) -#define rgblight_setrgb_green_at(at) rgblight_setrgb_at (0x00, 0xFF, 0x00, at) -#define rgblight_setrgb_springgreen_at(at) rgblight_setrgb_at (0x00, 0xFF, 0x80, at) -#define rgblight_setrgb_turquoise_at(at) rgblight_setrgb_at (0x47, 0x6E, 0x6A, at) -#define rgblight_setrgb_teal_at(at) rgblight_setrgb_at (0x00, 0x80, 0x80, at) -#define rgblight_setrgb_cyan_at(at) rgblight_setrgb_at (0x00, 0xFF, 0xFF, at) -#define rgblight_setrgb_azure_at(at) rgblight_setrgb_at (0x99, 0xf5, 0xFF, at) -#define rgblight_setrgb_blue_at(at) rgblight_setrgb_at (0x00, 0x00, 0xFF, at) -#define rgblight_setrgb_purple_at(at) rgblight_setrgb_at (0x7A, 0x00, 0xFF, at) -#define rgblight_setrgb_magenta_at(at) rgblight_setrgb_at (0xFF, 0x00, 0xFF, at) -#define rgblight_setrgb_pink_at(at) rgblight_setrgb_at (0xFF, 0x80, 0xBF, at) +#define rgblight_setrgb_white_at(at) rgblight_setrgb_at (RGB_WHITE, at) +#define rgblight_setrgb_red_at(at) rgblight_setrgb_at (RGB_RED, at) +#define rgblight_setrgb_coral_at(at) rgblight_setrgb_at (RGB_CORAL, at) +#define rgblight_setrgb_orange_at(at) rgblight_setrgb_at (RGB_ORANGE at) +#define rgblight_setrgb_goldenrod_at(at) rgblight_setrgb_at (RGB_GOLDENROD, at) +#define rgblight_setrgb_gold_at(at) rgblight_setrgb_at (RGB_GOLD, at) +#define rgblight_setrgb_yellow_at(at) rgblight_setrgb_at (RGB_YELLOW, at) +#define rgblight_setrgb_chartreuse_at(at) rgblight_setrgb_at (RGB_CHARTREUSE, at) +#define rgblight_setrgb_green_at(at) rgblight_setrgb_at (RGB_GREEN, at) +#define rgblight_setrgb_springgreen_at(at) rgblight_setrgb_at (RGB_SPRINGGREEN, at) +#define rgblight_setrgb_turquoise_at(at) rgblight_setrgb_at (RGB_TURQUOISE, at) +#define rgblight_setrgb_teal_at(at) rgblight_setrgb_at (RGB_TEAL, at) +#define rgblight_setrgb_cyan_at(at) rgblight_setrgb_at (RGB_CYAN, at) +#define rgblight_setrgb_azure_at(at) rgblight_setrgb_at (RGB_AZURE, at) +#define rgblight_setrgb_blue_at(at) rgblight_setrgb_at (RGB_BLUE, at) +#define rgblight_setrgb_purple_at(at) rgblight_setrgb_at (RGB_PURPLE, at) +#define rgblight_setrgb_magenta_at(at) rgblight_setrgb_at (RGB_MAGENTA, at) +#define rgblight_setrgb_pink_at(at) rgblight_setrgb_at (RGB_PINK, at) /* SET HSV List */ -#define rgblight_sethsv_white() rgblight_sethsv ( 0, 0, 255) -#define rgblight_sethsv_red() rgblight_sethsv ( 0, 255, 255) -#define rgblight_sethsv_coral() rgblight_sethsv ( 16, 176, 255) -#define rgblight_sethsv_orange() rgblight_sethsv ( 39, 255, 255) -#define rgblight_sethsv_goldenrod() rgblight_sethsv ( 43, 218, 218) -#define rgblight_sethsv_gold() rgblight_sethsv ( 51, 255, 255) -#define rgblight_sethsv_yellow() rgblight_sethsv ( 60, 255, 255) -#define rgblight_sethsv_chartreuse() rgblight_sethsv ( 90, 255, 255) -#define rgblight_sethsv_green() rgblight_sethsv (120, 255, 255) -#define rgblight_sethsv_springgreen() rgblight_sethsv (150, 255, 255) -#define rgblight_sethsv_turquoise() rgblight_sethsv (174, 90, 112) -#define rgblight_sethsv_teal() rgblight_sethsv (180, 255, 128) -#define rgblight_sethsv_cyan() rgblight_sethsv (180, 255, 255) -#define rgblight_sethsv_azure() rgblight_sethsv (186, 102, 255) -#define rgblight_sethsv_blue() rgblight_sethsv (240, 255, 255) -#define rgblight_sethsv_purple() rgblight_sethsv (270, 255, 255) -#define rgblight_sethsv_magenta() rgblight_sethsv (300, 255, 255) -#define rgblight_sethsv_pink() rgblight_sethsv (330, 128, 255) +#define rgblight_sethsv_white() rgblight_sethsv (HSV_WHITE) +#define rgblight_sethsv_red() rgblight_sethsv (HSV_RED) +#define rgblight_sethsv_coral() rgblight_sethsv (HSV_CORAL) +#define rgblight_sethsv_orange() rgblight_sethsv (HSV_ORANGE) +#define rgblight_sethsv_goldenrod() rgblight_sethsv (HSV_GOLDENROD) +#define rgblight_sethsv_gold() rgblight_sethsv (HSV_GOLD) +#define rgblight_sethsv_yellow() rgblight_sethsv (HSV_YELLOW) +#define rgblight_sethsv_chartreuse() rgblight_sethsv (HSV_CHARTREUSE) +#define rgblight_sethsv_green() rgblight_sethsv (HSV_GREEN) +#define rgblight_sethsv_springgreen() rgblight_sethsv (HSV_SPRINGGREEN) +#define rgblight_sethsv_turquoise() rgblight_sethsv (HSV_TURQUOISE) +#define rgblight_sethsv_teal() rgblight_sethsv (HSV_TEAL) +#define rgblight_sethsv_cyan() rgblight_sethsv (HSV_CYAN) +#define rgblight_sethsv_azure() rgblight_sethsv (HSV_AZURE) +#define rgblight_sethsv_blue() rgblight_sethsv (HSV_BLUE) +#define rgblight_sethsv_purple() rgblight_sethsv (HSV_PURPLE) +#define rgblight_sethsv_magenta() rgblight_sethsv (HSV_MAGENTA) +#define rgblight_sethsv_pink() rgblight_sethsv (HSV_PINK) /* SET HSV List */ /* If you're doing layer indication, this is best, as it won't */ /* write to the eeprom, since it's limited (very high value). */ /* If you want to use modes with this (since you can), then you */ /* want to use rgblight_mode_noeeprom(x) instead. */ -#define rgblight_sethsv_noeeprom_white() rgblight_sethsv_noeeprom ( 0, 0, 255) -#define rgblight_sethsv_noeeprom_red() rgblight_sethsv_noeeprom ( 0, 255, 255) -#define rgblight_sethsv_noeeprom_coral() rgblight_sethsv_noeeprom ( 16, 176, 255) -#define rgblight_sethsv_noeeprom_orange() rgblight_sethsv_noeeprom ( 39, 255, 255) -#define rgblight_sethsv_noeeprom_goldenrod() rgblight_sethsv_noeeprom ( 43, 218, 218) -#define rgblight_sethsv_noeeprom_gold() rgblight_sethsv_noeeprom ( 51, 255, 255) -#define rgblight_sethsv_noeeprom_yellow() rgblight_sethsv_noeeprom ( 60, 255, 255) -#define rgblight_sethsv_noeeprom_chartreuse() rgblight_sethsv_noeeprom ( 90, 255, 255) -#define rgblight_sethsv_noeeprom_green() rgblight_sethsv_noeeprom (120, 255, 255) -#define rgblight_sethsv_noeeprom_springgreen() rgblight_sethsv_noeeprom (150, 255, 255) -#define rgblight_sethsv_noeeprom_turquoise() rgblight_sethsv_noeeprom (174, 90, 112) -#define rgblight_sethsv_noeeprom_teal() rgblight_sethsv_noeeprom (180, 255, 128) -#define rgblight_sethsv_noeeprom_cyan() rgblight_sethsv_noeeprom (180, 255, 255) -#define rgblight_sethsv_noeeprom_azure() rgblight_sethsv_noeeprom (186, 102, 255) -#define rgblight_sethsv_noeeprom_blue() rgblight_sethsv_noeeprom (240, 255, 255) -#define rgblight_sethsv_noeeprom_purple() rgblight_sethsv_noeeprom (270, 255, 255) -#define rgblight_sethsv_noeeprom_magenta() rgblight_sethsv_noeeprom (300, 255, 255) -#define rgblight_sethsv_noeeprom_pink() rgblight_sethsv_noeeprom (330, 128, 255) +#define rgblight_sethsv_noeeprom_white() rgblight_sethsv_noeeprom (HSV_WHITE) +#define rgblight_sethsv_noeeprom_red() rgblight_sethsv_noeeprom (HSV_RED) +#define rgblight_sethsv_noeeprom_coral() rgblight_sethsv_noeeprom (HSV_CORAL) +#define rgblight_sethsv_noeeprom_orange() rgblight_sethsv_noeeprom (HSV_ORANGE) +#define rgblight_sethsv_noeeprom_goldenrod() rgblight_sethsv_noeeprom (HSV_GOLDENROD) +#define rgblight_sethsv_noeeprom_gold() rgblight_sethsv_noeeprom (HSV_GOLD) +#define rgblight_sethsv_noeeprom_yellow() rgblight_sethsv_noeeprom (HSV_YELLOW) +#define rgblight_sethsv_noeeprom_chartreuse() rgblight_sethsv_noeeprom (HSV_CHARTREUSE) +#define rgblight_sethsv_noeeprom_green() rgblight_sethsv_noeeprom (HSV_GREEN) +#define rgblight_sethsv_noeeprom_springgreen() rgblight_sethsv_noeeprom (HSV_SPRINGGREEN) +#define rgblight_sethsv_noeeprom_turquoise() rgblight_sethsv_noeeprom (HSV_TURQUOISE) +#define rgblight_sethsv_noeeprom_teal() rgblight_sethsv_noeeprom (HSV_TEAL) +#define rgblight_sethsv_noeeprom_cyan() rgblight_sethsv_noeeprom (HSV_CYAN) +#define rgblight_sethsv_noeeprom_azure() rgblight_sethsv_noeeprom (HSV_AZURE) +#define rgblight_sethsv_noeeprom_blue() rgblight_sethsv_noeeprom (HSV_BLUE) +#define rgblight_sethsv_noeeprom_purple() rgblight_sethsv_noeeprom (HSV_PURPLE) +#define rgblight_sethsv_noeeprom_magenta() rgblight_sethsv_noeeprom (HSV_MAGENTA) +#define rgblight_sethsv_noeeprom_pink() rgblight_sethsv_noeeprom (HSV_PINK) /* SET HSV List */ -#define rgblight_sethsv_white_at(at) rgblight_sethsv_at ( 0, 0, 255, at) -#define rgblight_sethsv_red_at(at) rgblight_sethsv_at ( 0, 255, 255, at) -#define rgblight_sethsv_coral_at(at) rgblight_sethsv_at ( 16, 176, 255, at) -#define rgblight_sethsv_orange_at(at) rgblight_sethsv_at ( 39, 255, 255, at) -#define rgblight_sethsv_goldenrod_at(at) rgblight_sethsv_at ( 43, 218, 218, at) -#define rgblight_sethsv_gold_at(at) rgblight_sethsv_at ( 51, 255, 255, at) -#define rgblight_sethsv_yellow_at(at) rgblight_sethsv_at ( 60, 255, 255, at) -#define rgblight_sethsv_chartreuse_at(at) rgblight_sethsv_at ( 90, 255, 255, at) -#define rgblight_sethsv_green_at(at) rgblight_sethsv_at (120, 255, 255, at) -#define rgblight_sethsv_springgreen_at(at) rgblight_sethsv_at (150, 255, 255, at) -#define rgblight_sethsv_turquoise_at(at) rgblight_sethsv_at (174, 90, 112, at) -#define rgblight_sethsv_teal_at(at) rgblight_sethsv_at (180, 255, 128, at) -#define rgblight_sethsv_cyan_at(at) rgblight_sethsv_at (180, 255, 255, at) -#define rgblight_sethsv_azure_at(at) rgblight_sethsv_at (186, 102, 255, at) -#define rgblight_sethsv_blue_at(at) rgblight_sethsv_at (240, 255, 255, at) -#define rgblight_sethsv_purple_at(at) rgblight_sethsv_at (270, 255, 255, at) -#define rgblight_sethsv_magenta_at(at) rgblight_sethsv_at (300, 255, 255, at) -#define rgblight_sethsv_pink_at(at) rgblight_sethsv_at (330, 128, 255, at) - -#endif +#define rgblight_sethsv_white_at(at) rgblight_sethsv_at (HSV_WHITE, at) +#define rgblight_sethsv_red_at(at) rgblight_sethsv_at (HSV_RED, at) +#define rgblight_sethsv_coral_at(at) rgblight_sethsv_at (HSV_CORAL, at) +#define rgblight_sethsv_orange_at(at) rgblight_sethsv_at (HSV_ORANGE, at) +#define rgblight_sethsv_goldenrod_at(at) rgblight_sethsv_at (HSV_GOLDENROD, at) +#define rgblight_sethsv_gold_at(at) rgblight_sethsv_at (HSV_GOLD, at) +#define rgblight_sethsv_yellow_at(at) rgblight_sethsv_at (HSV_YELLOW, at) +#define rgblight_sethsv_chartreuse_at(at) rgblight_sethsv_at (HSV_CHARTREUSE, at) +#define rgblight_sethsv_green_at(at) rgblight_sethsv_at (HSV_GREEN, at) +#define rgblight_sethsv_springgreen_at(at) rgblight_sethsv_at (HSV_SPRINGGREEN, at) +#define rgblight_sethsv_turquoise_at(at) rgblight_sethsv_at (HSV_TURQUOISE, at) +#define rgblight_sethsv_teal_at(at) rgblight_sethsv_at (HSV_TEAL, at) +#define rgblight_sethsv_cyan_at(at) rgblight_sethsv_at (HSV_CYAN, at) +#define rgblight_sethsv_azure_at(at) rgblight_sethsv_at (HSV_AZURE, at) +#define rgblight_sethsv_blue_at(at) rgblight_sethsv_at (HSV_BLUE, at) +#define rgblight_sethsv_purple_at(at) rgblight_sethsv_at (HSV_PURPLE, at) +#define rgblight_sethsv_magenta_at(at) rgblight_sethsv_at (HSV_MAGENTA, at) +#define rgblight_sethsv_pink_at(at) rgblight_sethsv_at (HSV_PINK, at) From c28a4321123131b6ff1e6c6b302fba764255623b Mon Sep 17 00:00:00 2001 From: Harshit Goel Date: Mon, 22 Apr 2019 20:58:17 +0530 Subject: [PATCH 167/171] added info.json for ymd96 (#4982) * added info.json for ymd96 * fix layout for keymap_custom macrom, correct info.json for default layout * add info layout for iso * add info layout for iso * align layout name, added maintainer username * layout case fix * layout case fix * fix overlapping keys * match layouts to keymaps. --- keyboards/ymd96/info.json | 19 +++++++++++++++++++ keyboards/ymd96/keymaps/default/keymap.c | 2 +- keyboards/ymd96/keymaps/epx/keymap.c | 2 +- keyboards/ymd96/keymaps/hgoel89/keymap.c | 6 +++--- keyboards/ymd96/ymd96.h | 10 +++++----- 5 files changed, 29 insertions(+), 10 deletions(-) create mode 100644 keyboards/ymd96/info.json diff --git a/keyboards/ymd96/info.json b/keyboards/ymd96/info.json new file mode 100644 index 00000000000..73edfd894f0 --- /dev/null +++ b/keyboards/ymd96/info.json @@ -0,0 +1,19 @@ +{ + "keyboard_name": "ymd96", + "url": "", + "maintainer": "sparkyman215", + + "width": 19, + "height": 6, + "layouts": { + "LAYOUT_default": { + "layout": [{"label":"Esc", "x":0, "y":0}, {"label":"F1", "x":1, "y":0}, {"label":"F2", "x":2, "y":0}, {"label":"F3", "x":3, "y":0}, {"label":"F4", "x":4, "y":0}, {"label":"F5", "x":5, "y":0}, {"label":"F6", "x":6, "y":0}, {"label":"F7", "x":7, "y":0}, {"label":"F8", "x":8, "y":0}, {"label":"F9", "x":9, "y":0}, {"label":"F10", "x":10, "y":0}, {"label":"F11", "x":11, "y":0}, {"label":"F12", "x":12, "y":0}, {"label":"Print Screen", "x":13, "y":0}, {"label":"Home", "x":14, "y":0}, {"label":"End", "x":15, "y":0}, {"label":"Insert", "x":16, "y":0}, {"label":"Delete", "x":17, "y":0}, {"label":"Page Up", "x":18, "y":0}, {"label":"~", "x":0, "y":1}, {"label":"!", "x":1, "y":1}, {"label":"@", "x":2, "y":1}, {"label":"#", "x":3, "y":1}, {"label":"$", "x":4, "y":1}, {"label":"%", "x":5, "y":1}, {"label":"^", "x":6, "y":1}, {"label":"&", "x":7, "y":1}, {"label":"*", "x":8, "y":1}, {"label":"(", "x":9, "y":1}, {"label":")", "x":10, "y":1}, {"label":"_", "x":11, "y":1}, {"label":"+", "x":12, "y":1}, {"label":"Backspace", "x":13, "y":1, "w":2}, {"label":"Num Lock", "x":15, "y":1}, {"label":"/", "x":16, "y":1}, {"label":"*", "x":17, "y":1}, {"label":"PgDn", "x":18, "y":1}, {"label":"Tab", "x":0, "y":2, "w":1.5}, {"label":"Q", "x":1.5, "y":2}, {"label":"W", "x":2.5, "y":2}, {"label":"E", "x":3.5, "y":2}, {"label":"R", "x":4.5, "y":2}, {"label":"T", "x":5.5, "y":2}, {"label":"Y", "x":6.5, "y":2}, {"label":"U", "x":7.5, "y":2}, {"label":"I", "x":8.5, "y":2}, {"label":"O", "x":9.5, "y":2}, {"label":"P", "x":10.5, "y":2}, {"label":"{", "x":11.5, "y":2}, {"label":"}", "x":12.5, "y":2}, {"label":"|", "x":13.5, "y":2, "w":1.5}, {"label":"7", "x":15, "y":2}, {"label":"8", "x":16, "y":2}, {"label":"9", "x":17, "y":2}, {"label":"+", "x":18, "y":2}, {"label":"Caps Lock", "x":0, "y":3, "w":1.75}, {"label":"A", "x":1.75, "y":3}, {"label":"S", "x":2.75, "y":3}, {"label":"D", "x":3.75, "y":3}, {"label":"F", "x":4.75, "y":3}, {"label":"G", "x":5.75, "y":3}, {"label":"H", "x":6.75, "y":3}, {"label":"J", "x":7.75, "y":3}, {"label":"K", "x":8.75, "y":3}, {"label":"L", "x":9.75, "y":3}, {"label":":", "x":10.75, "y":3}, {"label":"\"", "x":11.75, "y":3}, {"label":"Enter", "x":12.75, "y":3, "w":2.25}, {"label":"4", "x":15, "y":3}, {"label":"5", "x":16, "y":3}, {"label":"6", "x":17, "y":3}, {"label":"+", "x":18, "y":3},{"label":"Shift", "x":0, "y":4, "w":2.25}, {"label":"Z", "x":2.25, "y":4}, {"label":"X", "x":3.25, "y":4}, {"label":"C", "x":4.25, "y":4}, {"label":"V", "x":5.25, "y":4}, {"label":"B", "x":6.25, "y":4}, {"label":"N", "x":7.25, "y":4}, {"label":"M", "x":8.25, "y":4}, {"label":"<", "x":9.25, "y":4}, {"label":">", "x":10.25, "y":4}, {"label":"?", "x":11.25, "y":4}, {"label":"Shift", "x":12.25, "y":4, "w":2.75}, {"label":"1", "x":15, "y":4}, {"label":"2", "x":16, "y":4}, {"label":"3", "x":17, "y":4}, {"label":"Enter", "x":18, "y":4, "h":2}, {"label":"Ctrl", "x":0, "y":5, "w":1.25}, {"label":"Win", "x":1.25, "y":5, "w":1.25}, {"label":"Alt", "x":2.5, "y":5, "w":1.25}, {"x":3.75, "y":5, "w":6.25}, {"label":"Fn", "x":10, "y":5}, {"label":"Win", "x":11, "y":5}, {"label":"\u2190", "x":12, "y":5}, {"label":"\u2193", "x":13, "y":5}, {"label":"\u2191", "x":14, "y":5}, {"label":"\u2192", "x":15, "y":5}, {"label":"0", "x":16, "y":5}, {"label":".", "x":17, "y":5}] + }, + "LAYOUT_custom": { + "layout": [{"label":"Esc", "x":0, "y":0}, {"label":"F1", "x":1, "y":0}, {"label":"F2", "x":2, "y":0}, {"label":"F3", "x":3, "y":0}, {"label":"F4", "x":4, "y":0}, {"label":"F5", "x":5, "y":0}, {"label":"F6", "x":6, "y":0}, {"label":"F7", "x":7, "y":0}, {"label":"F8", "x":8, "y":0}, {"label":"F9", "x":9, "y":0}, {"label":"F10", "x":10, "y":0}, {"label":"F11", "x":11, "y":0}, {"label":"F12", "x":12, "y":0}, {"label":"Print Screen", "x":13, "y":0}, {"label":"Home", "x":14, "y":0}, {"label":"End", "x":15, "y":0}, {"label":"Insert", "x":16, "y":0}, {"label":"Delete", "x":17, "y":0}, {"label":"Page Up", "x":18, "y":0}, {"label":"~", "x":0, "y":1}, {"label":"!", "x":1, "y":1}, {"label":"@", "x":2, "y":1}, {"label":"#", "x":3, "y":1}, {"label":"$", "x":4, "y":1}, {"label":"%", "x":5, "y":1}, {"label":"^", "x":6, "y":1}, {"label":"&", "x":7, "y":1}, {"label":"*", "x":8, "y":1}, {"label":"(", "x":9, "y":1}, {"label":")", "x":10, "y":1}, {"label":"_", "x":11, "y":1}, {"label":"+", "x":12, "y":1}, {"label":"Backspace", "x":13, "y":1, "w":2}, {"label":"Num Lock", "x":15, "y":1}, {"label":"/", "x":16, "y":1}, {"label":"*", "x":17, "y":1}, {"label":"PgDn", "x":18, "y":1}, {"label":"Tab", "x":0, "y":2, "w":1.5}, {"label":"Q", "x":1.5, "y":2}, {"label":"W", "x":2.5, "y":2}, {"label":"E", "x":3.5, "y":2}, {"label":"R", "x":4.5, "y":2}, {"label":"T", "x":5.5, "y":2}, {"label":"Y", "x":6.5, "y":2}, {"label":"U", "x":7.5, "y":2}, {"label":"I", "x":8.5, "y":2}, {"label":"O", "x":9.5, "y":2}, {"label":"P", "x":10.5, "y":2}, {"label":"{", "x":11.5, "y":2}, {"label":"}", "x":12.5, "y":2}, {"label":"|", "x":13.5, "y":2, "w":1.5}, {"label":"7", "x":15, "y":2}, {"label":"8", "x":16, "y":2}, {"label":"9", "x":17, "y":2}, {"label":"-", "x":18, "y":2}, {"label":"Caps Lock", "x":0, "y":3, "w":1.75}, {"label":"A", "x":1.75, "y":3}, {"label":"S", "x":2.75, "y":3}, {"label":"D", "x":3.75, "y":3}, {"label":"F", "x":4.75, "y":3}, {"label":"G", "x":5.75, "y":3}, {"label":"H", "x":6.75, "y":3}, {"label":"J", "x":7.75, "y":3}, {"label":"K", "x":8.75, "y":3}, {"label":"L", "x":9.75, "y":3}, {"label":":", "x":10.75, "y":3}, {"label":"\"", "x":11.75, "y":3}, {"label":"Enter", "x":12.75, "y":3, "w":2.25}, {"label":"4", "x":15, "y":3}, {"label":"5", "x":16, "y":3}, {"label":"6", "x":17, "y":3}, {"label":"+", "x":18, "y":3}, {"label":"Shift", "x":0, "y":4, "w":2.25}, {"label":"Z", "x":2.25, "y":4}, {"label":"X", "x":3.25, "y":4}, {"label":"C", "x":4.25, "y":4}, {"label":"V", "x":5.25, "y":4}, {"label":"B", "x":6.25, "y":4}, {"label":"N", "x":7.25, "y":4}, {"label":"M", "x":8.25, "y":4}, {"label":"<", "x":9.25, "y":4}, {"label":">", "x":10.25, "y":4}, {"label":"?", "x":11.25, "y":4}, {"label":"Shift", "x":12.25, "y":4, "w":1.75}, {"label":"Fn", "x":14, "y":4}, {"label":"1", "x":15, "y":4}, {"label":"2", "x":16, "y":4}, {"label":"3", "x":17, "y":4}, {"label":"Enter", "x":18, "y":4, "h":2}, {"label":"Ctrl", "x":0, "y":5, "w":1.25}, {"label":"Win", "x":1.25, "y":5, "w":1.25}, {"label":"Alt", "x":2.5, "y":5, "w":1.25}, {"x":3.75, "y":5, "w":6.25}, {"label":"Alt", "x":10, "y":5}, {"label":"Menu", "x":11, "y":5}, {"label":"Prnt Scr", "x":12, "y":5}, {"label":"Ctrl", "x":13, "y":5}, {"label":"Scroll Lock", "x":14, "y":5}, {"label":"0", "x":15, "y":5, "w":2}, {"label":".", "x":17, "y":5}] + }, + "LAYOUT_iso": { + "layout": [{"label":"Esc", "x":0, "y":0}, {"label":"F1", "x":1, "y":0}, {"label":"F2", "x":2, "y":0}, {"label":"F3", "x":3, "y":0}, {"label":"F4", "x":4, "y":0}, {"label":"F5", "x":5, "y":0}, {"label":"F6", "x":6, "y":0}, {"label":"F7", "x":7, "y":0}, {"label":"F8", "x":8, "y":0}, {"label":"F9", "x":9, "y":0}, {"label":"F10", "x":10, "y":0}, {"label":"F11", "x":11, "y":0}, {"label":"F12", "x":12, "y":0}, {"label":"PrtSc", "x":13, "y":0}, {"label":"Home", "x":14, "y":0}, {"label":"End", "x":15, "y":0}, {"label":"Insert", "x":16, "y":0}, {"label":"Delete", "x":17, "y":0}, {"label":"PgUp", "x":18, "y":0}, {"label":"\u00ac", "x":0, "y":1}, {"label":"!", "x":1, "y":1}, {"label":"\"", "x":2, "y":1}, {"label":"\u00a3", "x":3, "y":1}, {"label":"$", "x":4, "y":1}, {"label":"%", "x":5, "y":1}, {"label":"^", "x":6, "y":1}, {"label":"&", "x":7, "y":1}, {"label":"*", "x":8, "y":1}, {"label":"(", "x":9, "y":1}, {"label":")", "x":10, "y":1}, {"label":"_", "x":11, "y":1}, {"label":"+", "x":12, "y":1}, {"label":"Backspace", "x":13, "y":1, "w":2}, {"label":"Num Lock", "x":15, "y":1}, {"label":"/", "x":16, "y":1}, {"label":"*", "x":17, "y":1}, {"label":"PgDn", "x":18, "y":1}, {"label":"Tab", "x":0, "y":2, "w":1.5}, {"label":"Q", "x":1.5, "y":2}, {"label":"W", "x":2.5, "y":2}, {"label":"E", "x":3.5, "y":2}, {"label":"R", "x":4.5, "y":2}, {"label":"T", "x":5.5, "y":2}, {"label":"Y", "x":6.5, "y":2}, {"label":"U", "x":7.5, "y":2}, {"label":"I", "x":8.5, "y":2}, {"label":"O", "x":9.5, "y":2}, {"label":"P", "x":10.5, "y":2}, {"label":"{", "x":11.5, "y":2}, {"label":"}", "x":12.5, "y":2}, {"label":"Enter", "x":13.75, "y":2, "w":1.25, "h":2}, {"label":"7", "x":15, "y":2}, {"label":"8", "x":16, "y":2}, {"label":"9", "x":17, "y":2}, {"label":"-", "x":18, "y":2}, {"label":"Caps Lock", "x":0, "y":3, "w":1.75}, {"label":"A", "x":1.75, "y":3}, {"label":"S", "x":2.75, "y":3}, {"label":"D", "x":3.75, "y":3}, {"label":"F", "x":4.75, "y":3}, {"label":"G", "x":5.75, "y":3}, {"label":"H", "x":6.75, "y":3}, {"label":"J", "x":7.75, "y":3}, {"label":"K", "x":8.75, "y":3}, {"label":"L", "x":9.75, "y":3}, {"label":":", "x":10.75, "y":3}, {"label":"@", "x":11.75, "y":3}, {"label":"~", "x":12.75, "y":3}, {"label":"4", "x":15, "y":3}, {"label":"5", "x":16, "y":3}, {"label":"6", "x":17, "y":3}, {"label":"+", "x":18, "y":3}, {"label":"Shift", "x":0, "y":4, "w":1.25}, {"label":"|", "x":1.25, "y":4}, {"label":"Z", "x":2.25, "y":4}, {"label":"X", "x":3.25, "y":4}, {"label":"C", "x":4.25, "y":4}, {"label":"V", "x":5.25, "y":4}, {"label":"B", "x":6.25, "y":4}, {"label":"N", "x":7.25, "y":4}, {"label":"M", "x":8.25, "y":4}, {"label":"<", "x":9.25, "y":4}, {"label":">", "x":10.25, "y":4}, {"label":"?", "x":11.25, "y":4}, {"label":"Shift", "x":12.25, "y":4, "w":1.75}, {"label":"Up", "x":14, "y":4}, {"label":"1", "x":15, "y":4}, {"label":"2", "x":16, "y":4}, {"label":"3", "x":17, "y":4}, {"label":"Enter", "x":18, "y":4, "h":2}, {"label":"Ctrl", "x":0, "y":5, "w":1.25}, {"label":"Win", "x":1.25, "y":5, "w":1.25}, {"label":"Alt", "x":2.5, "y":5, "w":1.25}, {"x":3.75, "y":5, "w":6.25}, {"label":"AltGr", "x":10, "y":5, "w":1.5}, {"label":"Win", "x":11.5, "y":5, "w":1.5}, {"label":"Left", "x":13, "y":5}, {"label":"Down", "x":14, "y":5}, {"label":"Right", "x":15, "y":5}, {"label":"0", "x":16, "y":5}, {"label":".", "x":17, "y":5}] + } + } +} \ No newline at end of file diff --git a/keyboards/ymd96/keymaps/default/keymap.c b/keyboards/ymd96/keymaps/default/keymap.c index 3d54c7395c0..c540972f10a 100644 --- a/keyboards/ymd96/keymaps/default/keymap.c +++ b/keyboards/ymd96/keymaps/default/keymap.c @@ -22,7 +22,7 @@ along with this program. If not, see . #define _DEFLT 0 #define _RAISE 1 -#define KEYMAP KEYMAP_DEFAULT +#define KEYMAP LAYOUT_default const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { diff --git a/keyboards/ymd96/keymaps/epx/keymap.c b/keyboards/ymd96/keymaps/epx/keymap.c index b9d3f6df228..09ec665a3a7 100644 --- a/keyboards/ymd96/keymaps/epx/keymap.c +++ b/keyboards/ymd96/keymaps/epx/keymap.c @@ -24,7 +24,7 @@ along with this program. If not, see . #define _AR 1 #define _RAISE 2 -#define KEYMAP KEYMAP_DEFAULT +#define KEYMAP LAYOUT_default const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { /* Layer 0, default layer diff --git a/keyboards/ymd96/keymaps/hgoel89/keymap.c b/keyboards/ymd96/keymaps/hgoel89/keymap.c index 81addf69f4d..f612f79bafc 100644 --- a/keyboards/ymd96/keymaps/hgoel89/keymap.c +++ b/keyboards/ymd96/keymaps/hgoel89/keymap.c @@ -27,7 +27,7 @@ qk_tap_dance_action_t tap_dance_actions[] = { #define _DEFLT 0 #define _RAISE 1 -#define KEYMAP KEYMAP_CUSTOM +#define KEYMAP LAYOUT_custom const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { @@ -45,8 +45,8 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_NUMLOCK, KC_KP_SLASH, KC_KP_ASTERISK, KC_PMNS, \ KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_P7, KC_P8, KC_P9, KC_NO, \ KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN,KC_QUOT, KC_ENT, KC_P4, KC_P5, KC_P6, KC_PPLS, \ - KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM,KC_DOT, KC_SLSH, KC_RSFT, KC_P1, KC_P2, KC_P3, KC_PENT, \ - KC_LCTL, KC_LGUI,KC_LALT, KC_SPC, KC_RGUI , KC_LEFT, KC_DOWN, KC_UP, KC_RGHT, MO(_RAISE), KC_P0, KC_PDOT \ + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM,KC_DOT, KC_SLSH, KC_RSFT,MO(_RAISE), KC_P1, KC_P2, KC_P3, KC_PENT, \ + KC_LCTL, KC_LGUI,KC_LALT, KC_SPC, KC_RGUI , KC_LEFT, KC_DOWN, KC_UP, KC_RGHT, KC_P0, KC_PDOT \ ), /* Layer 1, raise layer * | | | | | | | | | | | | | | | | | | | | diff --git a/keyboards/ymd96/ymd96.h b/keyboards/ymd96/ymd96.h index 9c25f221928..ebf01b1d612 100644 --- a/keyboards/ymd96/ymd96.h +++ b/keyboards/ymd96/ymd96.h @@ -26,7 +26,7 @@ along with this program. If not, see . void matrix_init_user(void); // TODO port this to other PS2AVRGB boards -#define KEYMAP_DEFAULT( \ +#define LAYOUT_default( \ K500, K502, K503, K504, K505, K600, K610, K710, K700, K511, K512, K513, K514, K113, K214, K013, K706, K709, K708, \ K400, K401, K402, K403, K404, K405, K601, K611, K711, K701, K410, K411, K412, K414, K406, K407, K408, K409, \ K300, K301, K302, K303, K304, K305, K602, K612, K712, K702, K310, K311, K312, K313, K306, K307, K308, K309, \ @@ -44,13 +44,13 @@ void matrix_init_user(void); // TODO port this to other PS2AVRGB boards { K700, K701, K702, K703, K704, K705, K706, KC_NO, K708, K709, K710, K711, K712, K713, K714 } \ } -#define KEYMAP_CUSTOM( \ +#define LAYOUT_custom( \ K500, K502, K503, K504, K505, K600, K610, K710, K700, K511, K512, K513, K514, K113, K214, K013, K706, K709, K708, \ K400, K401, K402, K403, K404, K405, K601, K611, K711, K701, K410, K411, K412, K414, K406, K407, K408, K409, \ K300, K301, K302, K303, K304, K305, K602, K612, K712, K702, K310, K311, K312, K313, K306, K307, K308, K309, \ K200, K201, K202, K203, K204, K205, K603, K613, K713, K703, K210, K211, K213, K206, K207, K208, K209, \ - K100, K101, K102, K103, K104, K105, K604, K614, K714, K704, K110, K111, K106, K107, K108, K009, \ - K000, K001, K002, K605, K705, K010, K011, K606, K607, KC_NO, K006, K008 \ + K100, K101, K102, K103, K104, K105, K604, K614, K714, K704, K110, K111, K608,K106, K107, K108, K009, \ + K000, K001, K002, K605, K705, K010, K011, K606, K607, K006, K008 \ ) { \ { K000, K001, K002, KC_NO, KC_NO, KC_NO, K006, KC_NO, K008, K009, K010, K011, KC_NO, K013, KC_NO, }, \ { K100, K101, K102, K103, K104, K105, K106, K107, K108, KC_NO, K110, K111, KC_NO, K113, KC_NO, }, \ @@ -58,7 +58,7 @@ void matrix_init_user(void); // TODO port this to other PS2AVRGB boards { K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313, KC_NO, }, \ { K400, K401, K402, K403, K404, K405, K406, K407, K408, K409, K410, K411, K412, KC_NO, K414, }, \ { K500, KC_NO, K502, K503, K504, K505, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, K511, K512, K513, K514, }, \ - { K600, K601, K602, K603, K604, K605, K606, K607, KC_NO, KC_NO, K610, K611, K612, K613, K614, }, \ + { K600, K601, K602, K603, K604, K605, K606, K607, K608, KC_NO, K610, K611, K612, K613, K614, }, \ { K700, K701, K702, K703, K704, K705, K706, KC_NO, K708, K709, K710, K711, K712, K713, K714 } \ } From b61baf4281bde34bfe28aaa1109bd5d5c6471116 Mon Sep 17 00:00:00 2001 From: Brice Figureau Date: Mon, 22 Apr 2019 11:34:13 -0400 Subject: [PATCH 168/171] Fix #3566 use an hardware timer for software PWM stability (#3615) With my XD60, I noticed that when typing the backlight was flickering. The XD60 doesn't have the backlight wired to a hardware PWM pin. I assumed it was a timing issue in the matrix scan that made the PWM lit the LED a bit too longer. I verified it because the more keys that were pressed, the more lighting I observed. This patch makes the software PWM be called during CPU interruptions. It works almost like the hardware PWM, except instead of using the CPU waveform generation, the CPU will fire interruption when the LEDs need be turned on or off. Using the same timer system as for hardware PWM, when the counter will reach OCRxx (the current backlight level), an Output Compare match interrupt will be fired and we'll turn the LEDs off. When the counter reaches its maximum value, an overflow interrupt will be triggered in which we turn the LEDs on. This way we replicate the hardware backlight PWM duty cycle. This gives a better time stability of the PWM computation than pure software PWM, leading to a flicker free backlight. Since this is reusing the hardware PWM code, software PWM also supports backlight breathing. Note that if timer1 is used for audio, backlight will use timer3, and if timer3 is used for audio backlight will use timer1. If both timers are used for audio, then this feature is disabled and we revert to the matrix scan based PWM computation. Signed-off-by: Brice Figureau --- docs/feature_backlight.md | 52 +++++++- quantum/quantum.c | 256 +++++++++++++++++++++++++++++++------- quantum/quantum.h | 4 + 3 files changed, 267 insertions(+), 45 deletions(-) diff --git a/docs/feature_backlight.md b/docs/feature_backlight.md index c7a1f131ed7..048d75390df 100644 --- a/docs/feature_backlight.md +++ b/docs/feature_backlight.md @@ -30,7 +30,31 @@ You should then be able to use the keycodes below to change the backlight level. This feature is distinct from both the [RGB underglow](feature_rgblight.md) and [RGB matrix](feature_rgb_matrix.md) features as it usually allows for only a single colour per switch, though you can obviously use multiple different coloured LEDs on a keyboard. -Hardware PWM is only supported on certain pins of the MCU, so if the backlighting is not connected to one of them, a software implementation will be used, and backlight breathing will not be available. Currently the supported pins are `B5`, `B6`, `B7`, and `C6`. +Hardware PWM is only supported on certain pins of the MCU, so if the backlighting is not connected to one of them, a software PWM implementation triggered by hardware timer interrupts will be used. + +Hardware PWM is supported according to the following table: + +| Backlight Pin | Hardware timer | +|---------------|----------------| +|`B5` | Timer 1 | +|`B6` | Timer 1 | +|`B7` | Timer 1 | +|`C6` | Timer 3 | +| other | Software PWM | + +The [audio feature](feature_audio.md) also uses hardware timers. Please refer to the following table to know what hardware timer the software PWM will use depending on the audio configuration: + +| Audio Pin(s) | Audio Timer | Software PWM Timer | +|--------------|-------------|--------------------| +| `C4` | Timer 3 | Timer 1 | +| `C5` | Timer 3 | Timer 1 | +| `C6` | Timer 3 | Timer 1 | +| `B5` | Timer 1 | Timer 3 | +| `B6` | Timer 1 | Timer 3 | +| `B7` | Timer 1 | Timer 3 | +| `Bx` & `Cx` | Timer 1 & 3 | None | + +When all timers are in use for [audio](feature_audio.md), the backlight software PWM will not use a hardware timer, but instead will be triggered during the matrix scan. In this case the backlight doesn't support breathing and might show lighting artifacts (for instance flickering), because the PWM computation might not be called with enough timing precision. ## Configuration @@ -39,11 +63,26 @@ To change the behaviour of the backlighting, `#define` these in your `config.h`: |Define |Default |Description | |---------------------|-------------|-------------------------------------------------------------------------------------------------------------| |`BACKLIGHT_PIN` |`B7` |The pin that controls the LEDs. Unless you are designing your own keyboard, you shouldn't need to change this| +|`BACKLIGHT_PINS` |*Not defined*|experimental: see below for more information| |`BACKLIGHT_LEVELS` |`3` |The number of brightness levels (maximum 15 excluding off) | |`BACKLIGHT_CAPS_LOCK`|*Not defined*|Enable Caps Lock indicator using backlight (for keyboards without dedicated LED) | -|`BACKLIGHT_BREATHING`|*Not defined*|Enable backlight breathing, if hardware PWM is used | +|`BACKLIGHT_BREATHING`|*Not defined*|Enable backlight breathing, if supported | |`BREATHING_PERIOD` |`6` |The length of one backlight "breath" in seconds | +## Multiple backlight pins + +Most keyboards have only one backlight pin which control all backlight LEDs (especially if the backlight is connected to an hardware PWM pin). +In software PWM, it is possible to define multiple backlight pins. All those pins will be turned on and off at the same time during the PWM duty cycle. +This feature allows to set for instance the Caps Lock LED (or any other controllable LED) brightness at the same level as the other LEDs of the backlight. This is useful if you have mapped LCTRL in place of Caps Lock and you need the Caps Lock LED to be part of the backlight instead of being activated when Caps Lock is on. + +To activate multiple backlight pins, you need to add something like this to your user `config.h`: + +~~~c +#define BACKLIGHT_LED_COUNT 2 +#undef BACKLIGHT_PIN +#define BACKLIGHT_PINS { F5, B2 } +~~~ + ## Hardware PWM Implementation When using the supported pins for backlighting, QMK will use a hardware timer configured to output a PWM signal. This timer will count up to `ICRx` (by default `0xFFFF`) before resetting to 0. @@ -53,6 +92,15 @@ In this way `OCRxx` essentially controls the duty cycle of the LEDs, and thus th The breathing effect is achieved by registering an interrupt handler for `TIMER1_OVF_vect` that is called whenever the counter resets, roughly 244 times per second. In this handler, the value of an incrementing counter is mapped onto a precomputed brightness curve. To turn off breathing, the interrupt handler is simply disabled, and the brightness reset to the level stored in EEPROM. +## Software PWM Implementation + +When `BACKLIGHT_PIN` is not set to a hardware backlight pin, QMK will use a hardware timer configured to trigger software interrupts. This time will count up to `ICRx` (by default `0xFFFF`) before resetting to 0. +When resetting to 0, the CPU will fire an OVF (overflow) interrupt that will turn the LEDs on, starting the duty cycle. +The desired brightness is calculated and stored in the `OCRxx` register. When the counter reaches this value, the CPU will fire a Compare Output match interrupt, which will turn the LEDs off. +In this way `OCRxx` essentially controls the duty cycle of the LEDs, and thus the brightness, where `0x0000` is completely off and `0xFFFF` is completely on. + +The breathing effect is the same as in the hardware PWM implementation. + ## Backlight Functions |Function |Description | diff --git a/quantum/quantum.c b/quantum/quantum.c index 9aa498dadb9..0fb798a7488 100644 --- a/quantum/quantum.c +++ b/quantum/quantum.c @@ -1138,30 +1138,38 @@ void matrix_scan_quantum() { matrix_scan_kb(); } -#if defined(BACKLIGHT_ENABLE) && defined(BACKLIGHT_PIN) +#if defined(BACKLIGHT_ENABLE) && (defined(BACKLIGHT_PIN) || defined(BACKLIGHT_PINS)) -static const uint8_t backlight_pin = BACKLIGHT_PIN; +// The logic is a bit complex, we support 3 setups: +// 1. hardware PWM when backlight is wired to a PWM pin +// depending on this pin, we use a different output compare unit +// 2. software PWM with hardware timers, but the used timer depends +// on the audio setup (audio wins other backlight) +// 3. full software PWM -// depending on the pin, we use a different output compare unit #if BACKLIGHT_PIN == B7 +# define HARDWARE_PWM # define TCCRxA TCCR1A # define TCCRxB TCCR1B # define COMxx1 COM1C1 # define OCRxx OCR1C # define ICRx ICR1 #elif BACKLIGHT_PIN == B6 +# define HARDWARE_PWM # define TCCRxA TCCR1A # define TCCRxB TCCR1B # define COMxx1 COM1B1 # define OCRxx OCR1B # define ICRx ICR1 #elif BACKLIGHT_PIN == B5 +# define HARDWARE_PWM # define TCCRxA TCCR1A # define TCCRxB TCCR1B # define COMxx1 COM1A1 # define OCRxx OCR1A # define ICRx ICR1 #elif BACKLIGHT_PIN == C6 +# define HARDWARE_PWM # define TCCRxA TCCR3A # define TCCRxB TCCR3B # define COMxx1 COM1A1 @@ -1175,28 +1183,115 @@ static const uint8_t backlight_pin = BACKLIGHT_PIN; # define ICRx ICR1 # define TIMSK1 TIMSK #else -# define NO_HARDWARE_PWM +# if !defined(BACKLIGHT_CUSTOM_DRIVER) +# if !defined(B5_AUDIO) && !defined(B6_AUDIO) && !defined(B7_AUDIO) + // timer 1 is not used by audio , backlight can use it +#pragma message "Using hardware timer 1 with software PWM" +# define HARDWARE_PWM +# define BACKLIGHT_PWM_TIMER +# define TCCRxA TCCR1A +# define TCCRxB TCCR1B +# define OCRxx OCR1A +# define OCRxAH OCR1AH +# define OCRxAL OCR1AL +# define TIMERx_COMPA_vect TIMER1_COMPA_vect +# define TIMERx_OVF_vect TIMER1_OVF_vect +# define OCIExA OCIE1A +# define TOIEx TOIE1 +# define ICRx ICR1 +# ifndef TIMSK +# define TIMSK TIMSK1 +# endif +# elif !defined(C6_AUDIO) && !defined(C5_AUDIO) && !defined(C4_AUDIO) +#pragma message "Using hardware timer 3 with software PWM" +// timer 3 is not used by audio, backlight can use it +# define HARDWARE_PWM +# define BACKLIGHT_PWM_TIMER +# define TCCRxA TCCR3A +# define TCCRxB TCCR3B +# define OCRxx OCR3A +# define OCRxAH OCR3AH +# define OCRxAL OCR3AL +# define TIMERx_COMPA_vect TIMER3_COMPA_vect +# define TIMERx_OVF_vect TIMER3_OVF_vect +# define OCIExA OCIE3A +# define TOIEx TOIE3 +# define ICRx ICR1 +# ifndef TIMSK +# define TIMSK TIMSK3 +# endif +# else +#pragma message "Audio in use - using pure software PWM" +#define NO_HARDWARE_PWM +# endif +# else +#pragma message "Custom driver defined - using pure software PWM" +#define NO_HARDWARE_PWM +# endif #endif #ifndef BACKLIGHT_ON_STATE #define BACKLIGHT_ON_STATE 0 #endif -#ifdef NO_HARDWARE_PWM // pwm through software +void backlight_on(uint8_t backlight_pin) { +#if BACKLIGHT_ON_STATE == 0 + writePinLow(backlight_pin); +#else + writePinHigh(backlight_pin); +#endif +} -__attribute__ ((weak)) +void backlight_off(uint8_t backlight_pin) { +#if BACKLIGHT_ON_STATE == 0 + writePinHigh(backlight_pin); +#else + writePinLow(backlight_pin); +#endif +} + + +#if defined(NO_HARDWARE_PWM) || defined(BACKLIGHT_PWM_TIMER) // pwm through software + +// we support multiple backlight pins +#ifndef BACKLIGHT_LED_COUNT +#define BACKLIGHT_LED_COUNT 1 +#endif + +#if BACKLIGHT_LED_COUNT == 1 +#define BACKLIGHT_PIN_INIT { BACKLIGHT_PIN } +#else +#define BACKLIGHT_PIN_INIT BACKLIGHT_PINS +#endif + +#define FOR_EACH_LED(x) \ + for (uint8_t i = 0; i < BACKLIGHT_LED_COUNT; i++) \ + { \ + uint8_t backlight_pin = backlight_pins[i]; \ + { \ + x \ + } \ + } + +static const uint8_t backlight_pins[BACKLIGHT_LED_COUNT] = BACKLIGHT_PIN_INIT; + +#else // full hardware PWM + +// we support only one backlight pin +static const uint8_t backlight_pin = BACKLIGHT_PIN; +#define FOR_EACH_LED(x) x + +#endif + +#ifdef NO_HARDWARE_PWM +__attribute__((weak)) void backlight_init_ports(void) { // Setup backlight pin as output and output to on state. - // DDRx |= n - _SFR_IO8((backlight_pin >> 4) + 1) |= _BV(backlight_pin & 0xF); - #if BACKLIGHT_ON_STATE == 0 - // PORTx &= ~n - _SFR_IO8((backlight_pin >> 4) + 2) &= ~_BV(backlight_pin & 0xF); - #else - // PORTx |= n - _SFR_IO8((backlight_pin >> 4) + 2) |= _BV(backlight_pin & 0xF); - #endif + FOR_EACH_LED( + setPinOutput(backlight_pin); + backlight_on(backlight_pin); + ) } __attribute__ ((weak)) @@ -1207,21 +1302,14 @@ uint8_t backlight_tick = 0; #ifndef BACKLIGHT_CUSTOM_DRIVER void backlight_task(void) { if ((0xFFFF >> ((BACKLIGHT_LEVELS - get_backlight_level()) * ((BACKLIGHT_LEVELS + 1) / 2))) & (1 << backlight_tick)) { - #if BACKLIGHT_ON_STATE == 0 - // PORTx &= ~n - _SFR_IO8((backlight_pin >> 4) + 2) &= ~_BV(backlight_pin & 0xF); - #else - // PORTx |= n - _SFR_IO8((backlight_pin >> 4) + 2) |= _BV(backlight_pin & 0xF); - #endif - } else { - #if BACKLIGHT_ON_STATE == 0 - // PORTx |= n - _SFR_IO8((backlight_pin >> 4) + 2) |= _BV(backlight_pin & 0xF); - #else - // PORTx &= ~n - _SFR_IO8((backlight_pin >> 4) + 2) &= ~_BV(backlight_pin & 0xF); - #endif + FOR_EACH_LED( + backlight_on(backlight_pin); + ) + } + else { + FOR_EACH_LED( + backlight_off(backlight_pin); + ) } backlight_tick = (backlight_tick + 1) % 16; } @@ -1233,7 +1321,52 @@ void backlight_task(void) { #endif #endif -#else // pwm through timer +#else // hardware pwm through timer + +#ifdef BACKLIGHT_PWM_TIMER + +// The idea of software PWM assisted by hardware timers is the following +// we use the hardware timer in fast PWM mode like for hardware PWM, but +// instead of letting the Output Match Comparator control the led pin +// (which is not possible since the backlight is not wired to PWM pins on the +// CPU), we do the LED on/off by oursleves. +// The timer is setup to count up to 0xFFFF, and we set the Output Compare +// register to the current 16bits backlight level (after CIE correction). +// This means the CPU will trigger a compare match interrupt when the counter +// reaches the backlight level, where we turn off the LEDs, +// but also an overflow interrupt when the counter rolls back to 0, +// in which we're going to turn on the LEDs. +// The LED will then be on for OCRxx/0xFFFF time, adjusted every 244Hz. + +// Triggered when the counter reaches the OCRx value +ISR(TIMERx_COMPA_vect) { + FOR_EACH_LED( + backlight_off(backlight_pin); + ) +} + +// Triggered when the counter reaches the TOP value +// this one triggers at F_CPU/65536 =~ 244 Hz +ISR(TIMERx_OVF_vect) { +#ifdef BACKLIGHT_BREATHING + breathing_task(); +#endif + // for very small values of OCRxx (or backlight level) + // we can't guarantee this whole code won't execute + // at the same time as the compare match interrupt + // which means that we might turn on the leds while + // trying to turn them off, leading to flickering + // artifacts (especially while breathing, because breathing_task + // takes many computation cycles). + // so better not turn them on while the counter TOP is very low. + if (OCRxx > 256) { + FOR_EACH_LED( + backlight_on(backlight_pin); + ) + } +} + +#endif #define TIMER_TOP 0xFFFFU @@ -1265,11 +1398,28 @@ void backlight_set(uint8_t level) { level = BACKLIGHT_LEVELS; if (level == 0) { + #ifdef BACKLIGHT_PWM_TIMER + if (OCRxx) { + TIMSK &= ~(_BV(OCIExA)); + TIMSK &= ~(_BV(TOIEx)); + FOR_EACH_LED( + backlight_off(backlight_pin); + ) + } + #else // Turn off PWM control on backlight pin TCCRxA &= ~(_BV(COMxx1)); + #endif } else { + #ifdef BACKLIGHT_PWM_TIMER + if (!OCRxx) { + TIMSK |= _BV(OCIExA); + TIMSK |= _BV(TOIEx); + } + #else // Turn on PWM control of backlight pin TCCRxA |= _BV(COMxx1); + #endif } // Set the brightness set_pwm(cie_lightness(TIMER_TOP * (uint32_t)level / BACKLIGHT_LEVELS)); @@ -1289,12 +1439,25 @@ static uint8_t breathing_period = BREATHING_PERIOD; static uint8_t breathing_halt = BREATHING_NO_HALT; static uint16_t breathing_counter = 0; +#ifdef BACKLIGHT_PWM_TIMER +static bool breathing = false; + +bool is_breathing(void) { + return breathing; +} + +#define breathing_interrupt_enable() do { breathing = true; } while (0) +#define breathing_interrupt_disable() do { breathing = false; } while (0) +#else + bool is_breathing(void) { return !!(TIMSK1 & _BV(TOIE1)); } #define breathing_interrupt_enable() do {TIMSK1 |= _BV(TOIE1);} while (0) #define breathing_interrupt_disable() do {TIMSK1 &= ~_BV(TOIE1);} while (0) +#endif + #define breathing_min() do {breathing_counter = 0;} while (0) #define breathing_max() do {breathing_counter = breathing_period * 244 / 2;} while (0) @@ -1368,10 +1531,14 @@ static inline uint16_t scale_backlight(uint16_t v) { return v / BACKLIGHT_LEVELS * get_backlight_level(); } +#ifdef BACKLIGHT_PWM_TIMER +void breathing_task(void) +#else /* Assuming a 16MHz CPU clock and a timer that resets at 64k (ICR1), the following interrupt handler will run * about 244 times per second. */ ISR(TIMER1_OVF_vect) +#endif { uint16_t interval = (uint16_t) breathing_period * 244 / BREATHING_STEPS; // resetting after one period to prevent ugly reset at overflow. @@ -1393,19 +1560,21 @@ __attribute__ ((weak)) void backlight_init_ports(void) { // Setup backlight pin as output and output to on state. - // DDRx |= n - _SFR_IO8((backlight_pin >> 4) + 1) |= _BV(backlight_pin & 0xF); - #if BACKLIGHT_ON_STATE == 0 - // PORTx &= ~n - _SFR_IO8((backlight_pin >> 4) + 2) &= ~_BV(backlight_pin & 0xF); - #else - // PORTx |= n - _SFR_IO8((backlight_pin >> 4) + 2) |= _BV(backlight_pin & 0xF); - #endif + FOR_EACH_LED( + setPinOutput(backlight_pin); + backlight_on(backlight_pin); + ) + // I could write a wall of text here to explain... but TL;DW // Go read the ATmega32u4 datasheet. // And this: http://blog.saikoled.com/post/43165849837/secret-konami-cheat-code-to-high-resolution-pwm-on +#ifdef BACKLIGHT_PWM_TIMER + // TimerX setup, Fast PWM mode count to TOP set in ICRx + TCCRxA = _BV(WGM11); // = 0b00000010; + // clock select clk/1 + TCCRxB = _BV(WGM13) | _BV(WGM12) | _BV(CS10); // = 0b00011001; +#else // hardware PWM // Pin PB7 = OCR1C (Timer 1, Channel C) // Compare Output Mode = Clear on compare match, Channel C = COM1C1=1 COM1C0=0 // (i.e. start high, go low when counter matches.) @@ -1417,8 +1586,9 @@ void backlight_init_ports(void) "In fast PWM mode, the compare units allow generation of PWM waveforms on the OCnx pins. Setting the COMnx1:0 bits to two will produce a non-inverted PWM [..]." "In fast PWM mode the counter is incremented until the counter value matches either one of the fixed values 0x00FF, 0x01FF, or 0x03FF (WGMn3:0 = 5, 6, or 7), the value in ICRn (WGMn3:0 = 14), or the value in OCRnA (WGMn3:0 = 15)." */ - TCCRxA = _BV(COMxx1) | _BV(WGM11); // = 0b00001010; + TCCRxA = _BV(COMxx1) | _BV(WGM11); // = 0b00001010; TCCRxB = _BV(WGM13) | _BV(WGM12) | _BV(CS10); // = 0b00011001; +#endif // Use full 16-bit resolution. Counter counts to ICR1 before reset to 0. ICRx = TIMER_TOP; @@ -1428,9 +1598,9 @@ void backlight_init_ports(void) #endif } -#endif // NO_HARDWARE_PWM +#endif // hardware backlight -#else // backlight +#else // no backlight __attribute__ ((weak)) void backlight_init_ports(void) {} diff --git a/quantum/quantum.h b/quantum/quantum.h index 987516dedbd..17cb902740d 100644 --- a/quantum/quantum.h +++ b/quantum/quantum.h @@ -260,8 +260,12 @@ void tap_code16(uint16_t code); #ifdef BACKLIGHT_ENABLE void backlight_init_ports(void); void backlight_task(void); +void backlight_task_internal(void); +void backlight_on(uint8_t backlight_pin); +void backlight_off(uint8_t backlight_pin); #ifdef BACKLIGHT_BREATHING +void breathing_task(void); void breathing_enable(void); void breathing_pulse(void); void breathing_disable(void); From bb52119a6dfe9c6f0314d1bcd948efda59626a70 Mon Sep 17 00:00:00 2001 From: M-AS Date: Mon, 22 Apr 2019 11:37:40 -0400 Subject: [PATCH 169/171] RGB Matrix Animations: Three/six new reactive effects (wide, cross, nexus) (#5602) * added 3 new RGB_Matrix effects * made cross effect behavior smoother * removed dead code * added effect descriptions --- docs/feature_rgb_matrix.md | 54 +++++++++++-------- quantum/rgb_matrix.c | 33 ++++++++++++ quantum/rgb_matrix.h | 18 +++++++ .../solid_reactive_cross.h | 50 +++++++++++++++++ .../solid_reactive_nexus.h | 48 +++++++++++++++++ .../solid_reactive_wide.h | 42 +++++++++++++++ 6 files changed, 224 insertions(+), 21 deletions(-) create mode 100644 quantum/rgb_matrix_animations/solid_reactive_cross.h create mode 100644 quantum/rgb_matrix_animations/solid_reactive_nexus.h create mode 100644 quantum/rgb_matrix_animations/solid_reactive_wide.h diff --git a/docs/feature_rgb_matrix.md b/docs/feature_rgb_matrix.md index 5309e749cb7..f2168ab16ef 100644 --- a/docs/feature_rgb_matrix.md +++ b/docs/feature_rgb_matrix.md @@ -189,6 +189,12 @@ enum rgb_matrix_effects { #if defined(RGB_MATRIX_KEYPRESSES) || defined(RGB_MATRIX_KEYRELEASES) RGB_MATRIX_SOLID_REACTIVE_SIMPLE, // Pulses keys hit to hue & value then fades value out RGB_MATRIX_SOLID_REACTIVE, // Static single hue, pulses keys hit to shifted hue then fades to current hue + RGB_MATRIX_SOLID_REACTIVE_WIDE // Hue & value pulse near a single key hit then fades value out + RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE // Hue & value pulse near multiple key hits then fades value out + RGB_MATRIX_SOLID_REACTIVE_CROSS // Hue & value pulse the same column and row of a single key hit then fades value out + RGB_MATRIX_SOLID_REACTIVE_MULTICROSS // Hue & value pulse the same column and row of multiple key hits then fades value out + RGB_MATRIX_SOLID_REACTIVE_NEXUS // Hue & value pulse away on the same column and row of a single key hit then fades value out + RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS // Hue & value pulse away on the same column and row of multiple key hits then fades value out RGB_MATRIX_SPLASH, // Full gradient & value pulse away from a single key hit then fades value out RGB_MATRIX_MULTISPLASH, // Full gradient & value pulse away from multiple key hits then fades value out RGB_MATRIX_SOLID_SPLASH, // Hue & value pulse away from a single key hit then fades value out @@ -201,27 +207,33 @@ enum rgb_matrix_effects { You can disable a single effect by defining `DISABLE_[EFFECT_NAME]` in your `config.h`: -|Define |Description | -|---------------------------------------------------|--------------------------------------------| -|`#define DISABLE_RGB_MATRIX_ALPHAS_MODS` |Disables `RGB_MATRIX_ALPHAS_MODS` | -|`#define DISABLE_RGB_MATRIX_GRADIENT_UP_DOWN` |Disables `RGB_MATRIX_GRADIENT_UP_DOWN` | -|`#define DISABLE_RGB_MATRIX_BREATHING` |Disables `RGB_MATRIX_BREATHING` | -|`#define DISABLE_RGB_MATRIX_CYCLE_ALL` |Disables `RGB_MATRIX_CYCLE_ALL` | -|`#define DISABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT` |Disables `RGB_MATRIX_CYCLE_LEFT_RIGHT` | -|`#define DISABLE_RGB_MATRIX_CYCLE_UP_DOWN` |Disables `RGB_MATRIX_CYCLE_UP_DOWN` | -|`#define DISABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON`|Disables `RGB_MATRIX_RAINBOW_MOVING_CHEVRON`| -|`#define DISABLE_RGB_MATRIX_DUAL_BEACON` |Disables `RGB_MATRIX_DUAL_BEACON` | -|`#define DISABLE_RGB_MATRIX_RAINBOW_BEACON` |Disables `RGB_MATRIX_RAINBOW_BEACON` | -|`#define DISABLE_RGB_MATRIX_RAINBOW_PINWHEELS` |Disables `RGB_MATRIX_RAINBOW_PINWHEELS` | -|`#define DISABLE_RGB_MATRIX_RAINDROPS` |Disables `RGB_MATRIX_RAINDROPS` | -|`#define DISABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS` |Disables `RGB_MATRIX_JELLYBEAN_RAINDROPS` | -|`#define DISABLE_RGB_MATRIX_DIGITAL_RAIN` |Disables `RGB_MATRIX_DIGITAL_RAIN` | -|`#define DISABLE_RGB_MATRIX_SOLID_REACTIVE` |Disables `RGB_MATRIX_SOLID_REACTIVE` | -|`#define DISABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE` |Disables `RGB_MATRIX_SOLID_REACTIVE_SIMPLEE`| -|`#define DISABLE_RGB_MATRIX_SPLASH` |Disables `RGB_MATRIX_SPLASH` | -|`#define DISABLE_RGB_MATRIX_MULTISPLASH` |Disables `RGB_MATRIX_MULTISPLASH` | -|`#define DISABLE_RGB_MATRIX_SOLID_SPLASH` |Disables `RGB_MATRIX_SOLID_SPLASH` | -|`#define DISABLE_RGB_MATRIX_SOLID_MULTISPLASH` |Disables `RGB_MATRIX_SOLID_MULTISPLASH` | +|Define |Description | +|-------------------------------------------------------|-----------------------------------------------| +|`#define DISABLE_RGB_MATRIX_ALPHAS_MODS` |Disables `RGB_MATRIX_ALPHAS_MODS` | +|`#define DISABLE_RGB_MATRIX_GRADIENT_UP_DOWN` |Disables `RGB_MATRIX_GRADIENT_UP_DOWN` | +|`#define DISABLE_RGB_MATRIX_BREATHING` |Disables `RGB_MATRIX_BREATHING` | +|`#define DISABLE_RGB_MATRIX_CYCLE_ALL` |Disables `RGB_MATRIX_CYCLE_ALL` | +|`#define DISABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT` |Disables `RGB_MATRIX_CYCLE_LEFT_RIGHT` | +|`#define DISABLE_RGB_MATRIX_CYCLE_UP_DOWN` |Disables `RGB_MATRIX_CYCLE_UP_DOWN` | +|`#define DISABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON` |Disables `RGB_MATRIX_RAINBOW_MOVING_CHEVRON` | +|`#define DISABLE_RGB_MATRIX_DUAL_BEACON` |Disables `RGB_MATRIX_DUAL_BEACON` | +|`#define DISABLE_RGB_MATRIX_RAINBOW_BEACON` |Disables `RGB_MATRIX_RAINBOW_BEACON` | +|`#define DISABLE_RGB_MATRIX_RAINBOW_PINWHEELS` |Disables `RGB_MATRIX_RAINBOW_PINWHEELS` | +|`#define DISABLE_RGB_MATRIX_RAINDROPS` |Disables `RGB_MATRIX_RAINDROPS` | +|`#define DISABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS` |Disables `RGB_MATRIX_JELLYBEAN_RAINDROPS` | +|`#define DISABLE_RGB_MATRIX_DIGITAL_RAIN` |Disables `RGB_MATRIX_DIGITAL_RAIN` | +|`#define DISABLE_RGB_MATRIX_SOLID_REACTIVE` |Disables `RGB_MATRIX_SOLID_REACTIVE` | +|`#define DISABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE` |Disables `RGB_MATRIX_SOLID_REACTIVE_SIMPLE` | +|`#define DISABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE` |Disables `RGB_MATRIX_SOLID_REACTIVE_WIDE` | +|`#define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE` |Disables `RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE` | +|`#define DISABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS` |Disables `RGB_MATRIX_SOLID_REACTIVE_CROSS` | +|`#define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS` |Disables `RGB_MATRIX_SOLID_REACTIVE_MULTICROSS`| +|`#define DISABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS` |Disables `RGB_MATRIX_SOLID_REACTIVE_NEXUS` | +|`#define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS` |Disables `RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS`| +|`#define DISABLE_RGB_MATRIX_SPLASH` |Disables `RGB_MATRIX_SPLASH` | +|`#define DISABLE_RGB_MATRIX_MULTISPLASH` |Disables `RGB_MATRIX_MULTISPLASH` | +|`#define DISABLE_RGB_MATRIX_SOLID_SPLASH` |Disables `RGB_MATRIX_SOLID_SPLASH` | +|`#define DISABLE_RGB_MATRIX_SOLID_MULTISPLASH` |Disables `RGB_MATRIX_SOLID_MULTISPLASH` | ## Custom layer effects diff --git a/quantum/rgb_matrix.c b/quantum/rgb_matrix.c index a1193d4c072..41ed8983eff 100644 --- a/quantum/rgb_matrix.c +++ b/quantum/rgb_matrix.c @@ -41,6 +41,9 @@ #include "rgb_matrix_animations/digital_rain_anim.h" #include "rgb_matrix_animations/solid_reactive_simple_anim.h" #include "rgb_matrix_animations/solid_reactive_anim.h" +#include "rgb_matrix_animations/solid_reactive_wide.h" +#include "rgb_matrix_animations/solid_reactive_cross.h" +#include "rgb_matrix_animations/solid_reactive_nexus.h" #include "rgb_matrix_animations/splash_anim.h" #include "rgb_matrix_animations/solid_splash_anim.h" #include "rgb_matrix_animations/breathing_anim.h" @@ -380,6 +383,36 @@ static void rgb_task_render(uint8_t effect) { rendering = rgb_matrix_solid_reactive(&rgb_effect_params); // Max 4ms Avg 3ms break; #endif // DISABLE_RGB_MATRIX_SOLID_REACTIVE +#ifndef DISABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE + case RGB_MATRIX_SOLID_REACTIVE_WIDE: + rendering = rgb_matrix_solid_reactive_wide(&rgb_effect_params); // Max ?? ms Avg ?? ms + break; +#endif // DISABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE +#ifndef DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE + case RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE: + rendering = rgb_matrix_solid_reactive_multiwide(&rgb_effect_params); // Max ?? ms Avg ?? ms + break; +#endif // DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE +#ifndef DISABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS + case RGB_MATRIX_SOLID_REACTIVE_CROSS: + rendering = rgb_matrix_solid_reactive_cross(&rgb_effect_params); // Max ?? ms Avg ?? ms + break; +#endif // DISABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS +#ifndef DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS + case RGB_MATRIX_SOLID_REACTIVE_MULTICROSS: + rendering = rgb_matrix_solid_reactive_multicross(&rgb_effect_params); // Max ?? ms Avg ?? ms + break; +#endif // DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS +#ifndef DISABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS + case RGB_MATRIX_SOLID_REACTIVE_NEXUS: + rendering = rgb_matrix_solid_reactive_nexus(&rgb_effect_params); // Max ?? ms Avg ?? ms + break; +#endif // DISABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS +#ifndef DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS + case RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS: + rendering = rgb_matrix_solid_reactive_multinexus(&rgb_effect_params); // Max ?? ms Avg ?? ms + break; +#endif // DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS #ifndef DISABLE_RGB_MATRIX_SPLASH case RGB_MATRIX_SPLASH: rendering = rgb_matrix_splash(&rgb_effect_params); // Max 5ms Avg 3ms diff --git a/quantum/rgb_matrix.h b/quantum/rgb_matrix.h index f5be494354f..5fdc854f08c 100644 --- a/quantum/rgb_matrix.h +++ b/quantum/rgb_matrix.h @@ -111,6 +111,24 @@ enum rgb_matrix_effects { #ifndef DISABLE_RGB_MATRIX_SOLID_REACTIVE RGB_MATRIX_SOLID_REACTIVE, #endif // DISABLE_RGB_MATRIX_SOLID_REACTIVE +#ifndef DISABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE + RGB_MATRIX_SOLID_REACTIVE_WIDE, +#endif // DISABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE +#ifndef DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE + RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE, +#endif // DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE +#ifndef DISABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS + RGB_MATRIX_SOLID_REACTIVE_CROSS, +#endif // DISABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS +#ifndef DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS + RGB_MATRIX_SOLID_REACTIVE_MULTICROSS, +#endif // DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS +#ifndef DISABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS + RGB_MATRIX_SOLID_REACTIVE_NEXUS, +#endif // DISABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS +#ifndef DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS + RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS, +#endif // DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS #ifndef DISABLE_RGB_MATRIX_SPLASH RGB_MATRIX_SPLASH, #endif // DISABLE_RGB_MATRIX_SPLASH diff --git a/quantum/rgb_matrix_animations/solid_reactive_cross.h b/quantum/rgb_matrix_animations/solid_reactive_cross.h new file mode 100644 index 00000000000..af602cba15a --- /dev/null +++ b/quantum/rgb_matrix_animations/solid_reactive_cross.h @@ -0,0 +1,50 @@ +#pragma once +#ifdef RGB_MATRIX_KEYREACTIVE_ENABLED +#if !defined(DISABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS) || !defined(DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS) + +extern const rgb_led g_rgb_leds[DRIVER_LED_TOTAL]; +extern rgb_config_t rgb_matrix_config; +extern last_hit_t g_last_hit_tracker; + +static bool rgb_matrix_solid_reactive_multicross_range(uint8_t start, effect_params_t* params) { + RGB_MATRIX_USE_LIMITS(led_min, led_max); + + HSV hsv = { rgb_matrix_config.hue, rgb_matrix_config.sat, 0 }; + uint8_t count = g_last_hit_tracker.count; + for (uint8_t i = led_min; i < led_max; i++) { + hsv.v = 0; + point_t point = g_rgb_leds[i].point; + for (uint8_t j = start; j < count; j++) { + int16_t dx = point.x - g_last_hit_tracker.x[j]; + int16_t dy = point.y - g_last_hit_tracker.y[j]; + uint8_t dist = sqrt16(dx * dx + dy * dy); + int16_t dist2 = 16; + uint8_t dist3; + uint16_t effect = scale16by8(g_last_hit_tracker.tick[j], rgb_matrix_config.speed) + dist; + dx = dx < 0 ? dx * -1 : dx; + dy = dy < 0 ? dy * -1 : dy; + dx = dx * dist2 > 255 ? 255 : dx * dist2; + dy = dy * dist2 > 255 ? 255 : dy * dist2; + dist3 = dx > dy ? dy : dx; + effect += dist3; + if (effect > 255) + effect = 255; + hsv.v = qadd8(hsv.v, 255 - effect); + } + hsv.v = scale8(hsv.v, rgb_matrix_config.val); + RGB rgb = hsv_to_rgb(hsv); + rgb_matrix_set_color(i, rgb.r, rgb.g, rgb.b); + } + return led_max < DRIVER_LED_TOTAL; +} + +bool rgb_matrix_solid_reactive_multicross(effect_params_t* params) { + return rgb_matrix_solid_reactive_multicross_range(0, params); +} + +bool rgb_matrix_solid_reactive_cross(effect_params_t* params) { + return rgb_matrix_solid_reactive_multicross_range(qsub8(g_last_hit_tracker.count, 1), params); +} + +#endif // !defined(DISABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS) || !defined(DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS) +#endif // RGB_MATRIX_KEYREACTIVE_ENABLED diff --git a/quantum/rgb_matrix_animations/solid_reactive_nexus.h b/quantum/rgb_matrix_animations/solid_reactive_nexus.h new file mode 100644 index 00000000000..8b4a139dc9c --- /dev/null +++ b/quantum/rgb_matrix_animations/solid_reactive_nexus.h @@ -0,0 +1,48 @@ +#pragma once +#ifdef RGB_MATRIX_KEYREACTIVE_ENABLED +#if !defined(DISABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS) || !defined(DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS) + +extern const rgb_led g_rgb_leds[DRIVER_LED_TOTAL]; +extern rgb_config_t rgb_matrix_config; +extern last_hit_t g_last_hit_tracker; + +static bool rgb_matrix_solid_reactive_multinexus_range(uint8_t start, effect_params_t* params) { + RGB_MATRIX_USE_LIMITS(led_min, led_max); + + HSV hsv = { rgb_matrix_config.hue, rgb_matrix_config.sat, 0 }; + uint8_t count = g_last_hit_tracker.count; + for (uint8_t i = led_min; i < led_max; i++) { + hsv.v = 0; + point_t point = g_rgb_leds[i].point; + for (uint8_t j = start; j < count; j++) { + int16_t dx = point.x - g_last_hit_tracker.x[j]; + int16_t dy = point.y - g_last_hit_tracker.y[j]; + uint8_t dist = sqrt16(dx * dx + dy * dy); + int16_t dist2 = 8; + uint16_t effect = scale16by8(g_last_hit_tracker.tick[j], rgb_matrix_config.speed) - dist; + if (effect > 255) + effect = 255; + if (dist > 72) + effect = 255; + if ((dx > dist2 || dx < -dist2) && (dy > dist2 || dy < -dist2)) + effect = 255; + hsv.v = qadd8(hsv.v, 255 - effect); + hsv.h = rgb_matrix_config.hue + dy / 4; + } + hsv.v = scale8(hsv.v, rgb_matrix_config.val); + RGB rgb = hsv_to_rgb(hsv); + rgb_matrix_set_color(i, rgb.r, rgb.g, rgb.b); + } + return led_max < DRIVER_LED_TOTAL; +} + +bool rgb_matrix_solid_reactive_multinexus(effect_params_t* params) { + return rgb_matrix_solid_reactive_multinexus_range(0, params); +} + +bool rgb_matrix_solid_reactive_nexus(effect_params_t* params) { + return rgb_matrix_solid_reactive_multinexus_range(qsub8(g_last_hit_tracker.count, 1), params); +} + +#endif // !defined(DISABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS) || !defined(DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS) +#endif // RGB_MATRIX_KEYREACTIVE_ENABLED diff --git a/quantum/rgb_matrix_animations/solid_reactive_wide.h b/quantum/rgb_matrix_animations/solid_reactive_wide.h new file mode 100644 index 00000000000..abb01892edb --- /dev/null +++ b/quantum/rgb_matrix_animations/solid_reactive_wide.h @@ -0,0 +1,42 @@ +#pragma once +#ifdef RGB_MATRIX_KEYREACTIVE_ENABLED +#if !defined(DISABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE) || !defined(DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE) + +extern const rgb_led g_rgb_leds[DRIVER_LED_TOTAL]; +extern rgb_config_t rgb_matrix_config; +extern last_hit_t g_last_hit_tracker; + +static bool rgb_matrix_solid_reactive_multiwide_range(uint8_t start, effect_params_t* params) { + RGB_MATRIX_USE_LIMITS(led_min, led_max); + + HSV hsv = { rgb_matrix_config.hue, rgb_matrix_config.sat, 0 }; + uint8_t count = g_last_hit_tracker.count; + for (uint8_t i = led_min; i < led_max; i++) { + hsv.v = 0; + point_t point = g_rgb_leds[i].point; + for (uint8_t j = start; j < count; j++) { + int16_t dx = point.x - g_last_hit_tracker.x[j]; + int16_t dy = point.y - g_last_hit_tracker.y[j]; + uint8_t dist = sqrt16(dx * dx + dy * dy); + uint16_t effect = scale16by8(g_last_hit_tracker.tick[j], rgb_matrix_config.speed) + dist * 5; + if (effect > 255) + effect = 255; + hsv.v = qadd8(hsv.v, 255 - effect); + } + hsv.v = scale8(hsv.v, rgb_matrix_config.val); + RGB rgb = hsv_to_rgb(hsv); + rgb_matrix_set_color(i, rgb.r, rgb.g, rgb.b); + } + return led_max < DRIVER_LED_TOTAL; +} + +bool rgb_matrix_solid_reactive_multiwide(effect_params_t* params) { + return rgb_matrix_solid_reactive_multiwide_range(0, params); +} + +bool rgb_matrix_solid_reactive_wide(effect_params_t* params) { + return rgb_matrix_solid_reactive_multiwide_range(qsub8(g_last_hit_tracker.count, 1), params); +} + +#endif // !defined(DISABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE) || !defined(DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE) +#endif // RGB_MATRIX_KEYREACTIVE_ENABLED From 6d73fe12779d6e8527d404572810ea95e714dce7 Mon Sep 17 00:00:00 2001 From: Takeshi ISHII <2170248+mtei@users.noreply.github.com> Date: Tue, 23 Apr 2019 03:20:13 +0900 Subject: [PATCH 170/171] fix LIB_SRC and QUANTUM_LIB_SRC for ARM (#5623) * fix LIB_SRC and QUANTUM_LIB_SRC for ARM(chibios) * remove ARFLAGS * tmk_core/arm_atsam.mk:AR: remove 'rcs' --- tmk_core/arm_atsam.mk | 2 +- tmk_core/avr.mk | 2 +- tmk_core/rules.mk | 2 +- 3 files changed, 3 insertions(+), 3 deletions(-) diff --git a/tmk_core/arm_atsam.mk b/tmk_core/arm_atsam.mk index 06823fb629f..25a3411f4f9 100644 --- a/tmk_core/arm_atsam.mk +++ b/tmk_core/arm_atsam.mk @@ -6,7 +6,7 @@ CC = arm-none-eabi-gcc OBJCOPY = arm-none-eabi-objcopy OBJDUMP = arm-none-eabi-objdump SIZE = arm-none-eabi-size -AR = arm-none-eabi-ar rcs +AR = arm-none-eabi-ar NM = arm-none-eabi-nm HEX = $(OBJCOPY) -O $(FORMAT) -R .eeprom -R .fuse -R .lock -R .signature EEP = $(OBJCOPY) -j .eeprom --set-section-flags=.eeprom="alloc,load" --change-section-lma .eeprom=0 --no-change-warnings -O $(FORMAT) diff --git a/tmk_core/avr.mk b/tmk_core/avr.mk index f6af3f5e290..6bf86d58a8c 100644 --- a/tmk_core/avr.mk +++ b/tmk_core/avr.mk @@ -6,7 +6,7 @@ CC = avr-gcc OBJCOPY = avr-objcopy OBJDUMP = avr-objdump SIZE = avr-size -AR = avr-ar rcs +AR = avr-ar NM = avr-nm HEX = $(OBJCOPY) -O $(FORMAT) -R .eeprom -R .fuse -R .lock -R .signature EEP = $(OBJCOPY) -j .eeprom --set-section-flags=.eeprom="alloc,load" --change-section-lma .eeprom=0 --no-change-warnings -O $(FORMAT) diff --git a/tmk_core/rules.mk b/tmk_core/rules.mk index 3a322cee4f2..6d2bb51f075 100644 --- a/tmk_core/rules.mk +++ b/tmk_core/rules.mk @@ -331,7 +331,7 @@ $1/%.o : %.S $1/asflags.txt $1/compiler.txt | $(BEGIN) $1/%.a : $1/%.o @mkdir -p $$(@D) @$(SILENT) || printf "Archiving: $$<" | $$(AWK_CMD) - $$(eval CMD=$$(AR) $$@ $$<) + $$(eval CMD=$$(AR) rcs $$@ $$<) @$$(BUILD_CMD) $1/force: From a2cec0594b15dc667adf7f1b0e35cb698dc1758d Mon Sep 17 00:00:00 2001 From: Drashna Jaelre Date: Mon, 22 Apr 2019 11:55:55 -0700 Subject: [PATCH 171/171] [Keymap] Update to Drashna Keymaps (#5594) * Start to standardize macro timer * Update Fractal layout Specifically, limit the RGB Lighting, since it's too many for the power, and only have the KITT annimation on the front * Update Iris keymap to use I2C for transport * Remove TAP_CODE_DELAY from keyboard in favor of global setting * Remove Woodpad Since it\'s no longer in my possession * Only enable LTO on AVR boards * Run matrix_scans while doing startup light * Run matrix_scan to get split keyboard code synced properly * Fix rgb mode * Remove custom debouncing settings * Make RGB Light Startup Animation optional * Fix opt def * Remove extra tap code delay value * Fix references to keebio boards * Add support for LP Iris keyboard * Add backlight code * Make startup animation optional * Update gitlab ci script * Remove port declaration * Revert avrgcc changes to gitlab ci file * Don't re-set mods * Remove MACRO_TIMER define * Add custom name for crkbd * Add name for Prime M pad * Add names for ortho 4x12 boards * Add some additional handling for rgb init * Change thumb clusters on ergodox * Switch Orthodox to I2C * Fix Space in ergodox keymap * Use OSL for ergodox layout * Ugh, can't find a good layout * Fix typo * Fix up animation startup * Cries in AVR * Fix makefiles for ergodox ez boards * Add support for "secret songs" in my userspace * Reset debounce to 5ms for Ergodox EZ * Fix gitlab CI yaml file * More crying in AVR * Cannot use rgb light and rgb matrix at the same time due to the WS2812 rgb matrix PR until the "Coexistance" PR is merged * Update ODox for split common and i2c * Add split config * Impement Split code * Add support for xscorpion OLED code * Add OLED display config * Fix OLED screen font * Get OLED set up in vertical mode * Remove old OLED code * add per key support for crkbd * Fix split changes * RGB Tweeaks * More OLED tweaks * Fix rotation stuff * Fix more OLED stuff * Remove custom Debounce from Ergodox layout since it's no longer needed --- keyboards/crkbd/keymaps/drashna/config.h | 11 +- keyboards/crkbd/keymaps/drashna/glcdfont.c | 240 ++++++++++++++++++ keyboards/crkbd/keymaps/drashna/keymap.c | 123 +++++++++ keyboards/crkbd/keymaps/drashna/rules.mk | 37 ++- .../woodpad/keymaps/drashna/README.md | 25 -- .../woodpad/keymaps/drashna/config.h | 45 ---- .../woodpad/keymaps/drashna/keymap.c | 95 ------- .../woodpad/keymaps/drashna/rules.mk | 10 - .../keebio/iris/keymaps/drashna/config.h | 8 +- .../keebio/iris/keymaps/drashna/keymap.c | 11 + .../keebio/iris/keymaps/drashna/rules.mk | 5 +- .../keebio/iris/keymaps/drashna_lp/config.h | 48 ++++ .../keebio/iris/keymaps/drashna_lp/keymap.c | 1 + .../keebio/iris/keymaps/drashna_lp/rules.mk | 7 + .../keebio/iris/keymaps/drashna_old/config.h | 4 +- keyboards/orthodox/keymaps/drashna/config.h | 5 +- keyboards/orthodox/keymaps/drashna/keymap.c | 2 +- keyboards/orthodox/keymaps/drashna/rules.mk | 4 +- layouts/community/ergodox/drashna/config.h | 1 - layouts/community/ergodox/drashna/keymap.c | 16 +- layouts/community/ergodox/drashna/rules.mk | 3 + .../community/ergodox/drashna_glow/config.h | 8 +- .../community/ergodox/drashna_glow/rules.mk | 7 +- layouts/community/numpad_5x6/drashna/config.h | 6 +- layouts/community/numpad_5x6/drashna/rules.mk | 1 + layouts/community/ortho_4x12/drashna/config.h | 13 +- layouts/community/ortho_4x12/drashna/keymap.c | 2 - layouts/community/ortho_4x12/drashna/rules.mk | 12 +- layouts/community/ortho_5x12/drashna/config.h | 6 + users/drashna/.gitignore | 3 + users/drashna/.gitlab-ci.yml | 30 +-- users/drashna/config.h | 2 +- users/drashna/drashna.c | 18 +- users/drashna/drashna.h | 6 +- users/drashna/process_records.c | 20 +- users/drashna/process_records.h | 2 + users/drashna/rgb_stuff.c | 25 +- users/drashna/rules.mk | 7 +- 38 files changed, 569 insertions(+), 300 deletions(-) create mode 100644 keyboards/crkbd/keymaps/drashna/glcdfont.c delete mode 100644 keyboards/handwired/woodpad/keymaps/drashna/README.md delete mode 100644 keyboards/handwired/woodpad/keymaps/drashna/config.h delete mode 100644 keyboards/handwired/woodpad/keymaps/drashna/keymap.c delete mode 100644 keyboards/handwired/woodpad/keymaps/drashna/rules.mk create mode 100644 keyboards/keebio/iris/keymaps/drashna_lp/config.h create mode 100644 keyboards/keebio/iris/keymaps/drashna_lp/keymap.c create mode 100644 keyboards/keebio/iris/keymaps/drashna_lp/rules.mk create mode 100644 users/drashna/.gitignore diff --git a/keyboards/crkbd/keymaps/drashna/config.h b/keyboards/crkbd/keymaps/drashna/config.h index cbc3feeb616..6f2665f3acb 100644 --- a/keyboards/crkbd/keymaps/drashna/config.h +++ b/keyboards/crkbd/keymaps/drashna/config.h @@ -27,7 +27,7 @@ along with this program. If not, see . // #define MASTER_RIGHT #define EE_HANDS -#define SSD1306OLED +// #define SSD1306OLED #define USE_SERIAL_PD2 @@ -48,3 +48,12 @@ along with this program. If not, see . #define B6_AUDIO // #define NO_MUSIC_MODE #endif + +#undef PRODUCT +#define PRODUCT Drashna Hacked Corne Keyboard + +#define OLED_FONT_H "keyboards/crkbd/keymaps/drashna/glcdfont.c" +// #define OLED_FONT_WIDTH 5 +// #define OLED_FONT_HEIGHT 7 + +#define TAPPING_TERM_PER_KEY diff --git a/keyboards/crkbd/keymaps/drashna/glcdfont.c b/keyboards/crkbd/keymaps/drashna/glcdfont.c new file mode 100644 index 00000000000..28521b42892 --- /dev/null +++ b/keyboards/crkbd/keymaps/drashna/glcdfont.c @@ -0,0 +1,240 @@ +#pragma once + +#ifdef __AVR__ + #include + #include +#elif defined(ESP8266) + #include +#else + #define PROGMEM +#endif + +// Helidox 8x6 font with QMK Firmware Logo +// Online editor: http://teripom.x0.com/ + +const unsigned char font[] PROGMEM = { +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x3E, 0x5B, 0x4F, 0x5B, 0x3E, 0x00, +0x3E, 0x6B, 0x4F, 0x6B, 0x3E, 0x00, +0x1C, 0x3E, 0x7C, 0x3E, 0x1C, 0x00, +0x18, 0x3C, 0x7E, 0x3C, 0x18, 0x00, +0x1C, 0x57, 0x7D, 0x57, 0x1C, 0x00, +0x1C, 0x5E, 0x7F, 0x5E, 0x1C, 0x00, +0x00, 0x18, 0x3C, 0x18, 0x00, 0x00, +0xFF, 0xE7, 0xC3, 0xE7, 0xFF, 0x00, +0x00, 0x18, 0x24, 0x18, 0x00, 0x00, +0xFF, 0xE7, 0xDB, 0xE7, 0xFF, 0x00, +0x30, 0x48, 0x3A, 0x06, 0x0E, 0x00, +0x26, 0x29, 0x79, 0x29, 0x26, 0x00, +0x40, 0x7F, 0x05, 0x05, 0x07, 0x00, +0x40, 0x7F, 0x05, 0x25, 0x3F, 0x00, +0x5A, 0x3C, 0xE7, 0x3C, 0x5A, 0x00, +0x7F, 0x3E, 0x1C, 0x1C, 0x08, 0x00, +0x08, 0x1C, 0x1C, 0x3E, 0x7F, 0x00, +0x14, 0x22, 0x7F, 0x22, 0x14, 0x00, +0x5F, 0x5F, 0x00, 0x5F, 0x5F, 0x00, +0x06, 0x09, 0x7F, 0x01, 0x7F, 0x00, +0x00, 0x66, 0x89, 0x95, 0x6A, 0x00, +0x60, 0x60, 0x60, 0x60, 0x60, 0x00, +0x94, 0xA2, 0xFF, 0xA2, 0x94, 0x00, +0x08, 0x04, 0x7E, 0x04, 0x08, 0x00, +0x10, 0x20, 0x7E, 0x20, 0x10, 0x00, +0x08, 0x08, 0x2A, 0x1C, 0x08, 0x00, +0x08, 0x1C, 0x2A, 0x08, 0x08, 0x00, +0x1E, 0x10, 0x10, 0x10, 0x10, 0x00, +0x0C, 0x1E, 0x0C, 0x1E, 0x0C, 0x00, +0x30, 0x38, 0x3E, 0x38, 0x30, 0x00, +0x06, 0x0E, 0x3E, 0x0E, 0x06, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x5F, 0x00, 0x00, 0x00, +0x00, 0x07, 0x00, 0x07, 0x00, 0x00, +0x14, 0x7F, 0x14, 0x7F, 0x14, 0x00, +0x24, 0x2A, 0x7F, 0x2A, 0x12, 0x00, +0x23, 0x13, 0x08, 0x64, 0x62, 0x00, +0x36, 0x49, 0x56, 0x20, 0x50, 0x00, +0x00, 0x08, 0x07, 0x03, 0x00, 0x00, +0x00, 0x1C, 0x22, 0x41, 0x00, 0x00, +0x00, 0x41, 0x22, 0x1C, 0x00, 0x00, +0x2A, 0x1C, 0x7F, 0x1C, 0x2A, 0x00, +0x08, 0x08, 0x3E, 0x08, 0x08, 0x00, +0x00, 0x80, 0x70, 0x30, 0x00, 0x00, +0x08, 0x08, 0x08, 0x08, 0x08, 0x00, +0x00, 0x00, 0x60, 0x60, 0x00, 0x00, +0x20, 0x10, 0x08, 0x04, 0x02, 0x00, +0x3E, 0x51, 0x49, 0x45, 0x3E, 0x00, +0x00, 0x42, 0x7F, 0x40, 0x00, 0x00, +0x72, 0x49, 0x49, 0x49, 0x46, 0x00, +0x21, 0x41, 0x49, 0x4D, 0x33, 0x00, +0x18, 0x14, 0x12, 0x7F, 0x10, 0x00, +0x27, 0x45, 0x45, 0x45, 0x39, 0x00, +0x3C, 0x4A, 0x49, 0x49, 0x31, 0x00, +0x41, 0x21, 0x11, 0x09, 0x07, 0x00, +0x36, 0x49, 0x49, 0x49, 0x36, 0x00, +0x46, 0x49, 0x49, 0x29, 0x1E, 0x00, +0x00, 0x00, 0x14, 0x00, 0x00, 0x00, +0x00, 0x40, 0x34, 0x00, 0x00, 0x00, +0x00, 0x08, 0x14, 0x22, 0x41, 0x00, +0x14, 0x14, 0x14, 0x14, 0x14, 0x00, +0x00, 0x41, 0x22, 0x14, 0x08, 0x00, +0x02, 0x01, 0x59, 0x09, 0x06, 0x00, +0x3E, 0x41, 0x5D, 0x59, 0x4E, 0x00, +0x7C, 0x12, 0x11, 0x12, 0x7C, 0x00, +0x7F, 0x49, 0x49, 0x49, 0x36, 0x00, +0x3E, 0x41, 0x41, 0x41, 0x22, 0x00, +0x7F, 0x41, 0x41, 0x41, 0x3E, 0x00, +0x7F, 0x49, 0x49, 0x49, 0x41, 0x00, +0x7F, 0x09, 0x09, 0x09, 0x01, 0x00, +0x3E, 0x41, 0x41, 0x51, 0x73, 0x00, +0x7F, 0x08, 0x08, 0x08, 0x7F, 0x00, +0x00, 0x41, 0x7F, 0x41, 0x00, 0x00, +0x20, 0x40, 0x41, 0x3F, 0x01, 0x00, +0x7F, 0x08, 0x14, 0x22, 0x41, 0x00, +0x7F, 0x40, 0x40, 0x40, 0x40, 0x00, +0x7F, 0x02, 0x1C, 0x02, 0x7F, 0x00, +0x7F, 0x04, 0x08, 0x10, 0x7F, 0x00, +0x3E, 0x41, 0x41, 0x41, 0x3E, 0x00, +0x7F, 0x09, 0x09, 0x09, 0x06, 0x00, +0x3E, 0x41, 0x51, 0x21, 0x5E, 0x00, +0x7F, 0x09, 0x19, 0x29, 0x46, 0x00, +0x26, 0x49, 0x49, 0x49, 0x32, 0x00, +0x03, 0x01, 0x7F, 0x01, 0x03, 0x00, +0x3F, 0x40, 0x40, 0x40, 0x3F, 0x00, +0x1F, 0x20, 0x40, 0x20, 0x1F, 0x00, +0x3F, 0x40, 0x38, 0x40, 0x3F, 0x00, +0x63, 0x14, 0x08, 0x14, 0x63, 0x00, +0x03, 0x04, 0x78, 0x04, 0x03, 0x00, +0x61, 0x59, 0x49, 0x4D, 0x43, 0x00, +0x00, 0x7F, 0x41, 0x41, 0x41, 0x00, +0x02, 0x04, 0x08, 0x10, 0x20, 0x00, +0x00, 0x41, 0x41, 0x41, 0x7F, 0x00, +0x04, 0x02, 0x01, 0x02, 0x04, 0x00, +0x40, 0x40, 0x40, 0x40, 0x40, 0x00, +0x00, 0x03, 0x07, 0x08, 0x00, 0x00, +0x20, 0x54, 0x54, 0x78, 0x40, 0x00, +0x7F, 0x28, 0x44, 0x44, 0x38, 0x00, +0x38, 0x44, 0x44, 0x44, 0x28, 0x00, +0x38, 0x44, 0x44, 0x28, 0x7F, 0x00, +0x38, 0x54, 0x54, 0x54, 0x18, 0x00, +0x00, 0x08, 0x7E, 0x09, 0x02, 0x00, +0x18, 0x24, 0x24, 0x1C, 0x78, 0x00, +0x7F, 0x08, 0x04, 0x04, 0x78, 0x00, +0x00, 0x44, 0x7D, 0x40, 0x00, 0x00, +0x20, 0x40, 0x40, 0x3D, 0x00, 0x00, +0x7F, 0x10, 0x28, 0x44, 0x00, 0x00, +0x00, 0x41, 0x7F, 0x40, 0x00, 0x00, +0x7C, 0x04, 0x78, 0x04, 0x78, 0x00, +0x7C, 0x08, 0x04, 0x04, 0x78, 0x00, +0x38, 0x44, 0x44, 0x44, 0x38, 0x00, +0x7C, 0x18, 0x24, 0x24, 0x18, 0x00, +0x18, 0x24, 0x24, 0x18, 0x7C, 0x00, +0x7C, 0x08, 0x04, 0x04, 0x08, 0x00, +0x48, 0x54, 0x54, 0x54, 0x24, 0x00, +0x04, 0x04, 0x3F, 0x44, 0x24, 0x00, +0x3C, 0x40, 0x40, 0x20, 0x7C, 0x00, +0x1C, 0x20, 0x40, 0x20, 0x1C, 0x00, +0x3C, 0x40, 0x30, 0x40, 0x3C, 0x00, +0x44, 0x28, 0x10, 0x28, 0x44, 0x00, +0x4C, 0x90, 0x90, 0x90, 0x7C, 0x00, +0x44, 0x64, 0x54, 0x4C, 0x44, 0x00, +0x00, 0x08, 0x36, 0x41, 0x00, 0x00, +0x00, 0x00, 0x77, 0x00, 0x00, 0x00, +0x00, 0x41, 0x36, 0x08, 0x00, 0x00, +0x02, 0x01, 0x02, 0x04, 0x02, 0x00, +0x3C, 0x26, 0x23, 0x26, 0x3C, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0xC0, 0xE0, +0xF0, 0xF8, 0xF8, 0x18, 0x00, 0xC0, +0xF0, 0xFC, 0xFE, 0xFF, 0xFF, 0xFF, +0xFF, 0xFF, 0xFF, 0xFF, 0x7E, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x80, 0xC0, 0xE0, 0xE0, +0xE0, 0xE0, 0xE0, 0xE0, 0xE0, 0xE0, +0xC0, 0x80, 0x00, 0x00, 0x00, 0x00, +0x80, 0xC0, 0xE0, 0xE0, 0xE0, 0xE0, +0xE0, 0xE0, 0xE0, 0xE0, 0xC0, 0x80, +0x00, 0x00, 0x00, 0xE0, 0xE0, 0xC0, +0xC0, 0xE0, 0xE0, 0xE0, 0xE0, 0x00, +0x00, 0xE0, 0xE0, 0xC0, 0xC0, 0xE0, +0xE0, 0xE0, 0xE0, 0xE0, 0xC0, 0x80, +0x00, 0x00, 0x00, 0x00, 0x80, 0xC0, +0xE0, 0xE0, 0xE0, 0xE0, 0xE0, 0xE0, +0xE0, 0xE0, 0xC0, 0x80, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0xE0, 0xF0, 0xF0, 0xF0, 0xE0, 0xEC, +0xEE, 0xF7, 0xF3, 0x70, 0x20, 0x00, +0x7C, 0x7C, 0x7C, 0x7E, 0x00, 0x7E, +0x7E, 0x7E, 0x7F, 0x7F, 0x7F, 0x00, +0x00, 0x80, 0xC0, 0xE0, 0x7E, 0x5B, +0x4F, 0x5B, 0xFE, 0xC0, 0x00, 0x00, +0xC0, 0x00, 0xDC, 0xD7, 0xDE, 0xDE, +0xDE, 0xD7, 0xDC, 0x00, 0xC0, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0xF8, 0xFC, 0xFE, +0xFF, 0xE0, 0x00, 0xFF, 0xFF, 0xFF, +0xFF, 0xFF, 0xFF, 0x80, 0xFF, 0xFF, +0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, +0xFF, 0x1F, 0x07, 0x01, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0xFF, 0xFF, 0xFF, 0x81, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x81, +0xC3, 0xC3, 0xC3, 0x00, 0x00, 0xFF, +0xFF, 0xFF, 0x81, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x81, 0xFF, 0xFF, +0xFF, 0x00, 0x00, 0xFF, 0xFF, 0xFF, +0x01, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0xFF, 0xFF, 0xFF, 0x01, 0x00, +0x00, 0x00, 0x00, 0x01, 0xFF, 0xFF, +0xFF, 0x00, 0x00, 0xFF, 0xFF, 0xFF, +0x9D, 0x1C, 0x1C, 0x1C, 0x1C, 0x1C, +0x1C, 0x9D, 0xDF, 0xDF, 0xDF, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x0F, 0x1F, 0x3F, 0x7F, 0x7F, 0x7F, +0x7F, 0x7F, 0x3F, 0x1E, 0x0C, 0x00, +0x1F, 0x1F, 0x1F, 0x3F, 0x00, 0x3F, +0x3F, 0x3F, 0x7F, 0x7F, 0x7F, 0x00, +0x30, 0x7B, 0x7F, 0x78, 0x30, 0x20, +0x20, 0x30, 0x78, 0x7F, 0x3B, 0x00, +0x03, 0x00, 0x0F, 0x7F, 0x0F, 0x0F, +0x0F, 0x7F, 0x0F, 0x00, 0x03, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x03, 0x0F, 0x1F, +0x3F, 0x3F, 0x3F, 0x3F, 0x1F, 0x1F, +0x3F, 0x3F, 0x7F, 0x7F, 0x7F, 0x3F, +0x3F, 0x1F, 0x3F, 0x7F, 0x7F, 0x7F, +0x7F, 0x7C, 0x78, 0x78, 0x38, 0x1C, +0x0F, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x01, 0x03, 0x07, 0x07, +0x07, 0x07, 0x07, 0x07, 0x07, 0x07, +0x03, 0x01, 0x00, 0x00, 0x00, 0x00, +0x01, 0x03, 0x07, 0x07, 0x07, 0x07, +0x07, 0x07, 0x07, 0x07, 0x03, 0x01, +0x00, 0x00, 0x00, 0x07, 0x07, 0x07, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x07, 0x07, 0x07, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x07, 0x07, +0x07, 0x00, 0x00, 0x00, 0x01, 0x03, +0x07, 0x07, 0x07, 0x07, 0x07, 0x07, +0x07, 0x07, 0x03, 0x01, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +}; diff --git a/keyboards/crkbd/keymaps/drashna/keymap.c b/keyboards/crkbd/keymaps/drashna/keymap.c index 91f0ebfa270..aaace9483aa 100644 --- a/keyboards/crkbd/keymaps/drashna/keymap.c +++ b/keyboards/crkbd/keymaps/drashna/keymap.c @@ -7,6 +7,9 @@ #ifdef SSD1306OLED #include "ssd1306.h" #endif +#ifdef OLED_DRIVER_ENABLE + #include "oled_driver.h" +#endif extern keymap_config_t keymap_config; extern uint8_t is_master; @@ -288,3 +291,123 @@ bool process_record_keymap(uint16_t keycode, keyrecord_t *record) { } #endif + + +#ifdef OLED_DRIVER_ENABLE +oled_rotation_t oled_init_user(oled_rotation_t rotation) { + if (is_master) { + return OLED_ROTATION_270; + } else { + return rotation; + } +} + +void render_crkbd_logo(void) { + static const char PROGMEM crkbd_logo[] = { + 0x80, 0x81, 0x82, 0x83, 0x84, 0x85, 0x86, 0x87, 0x88, 0x89, 0x8a, 0x8b, 0x8c, 0x8d, 0x8e, 0x8f, 0x90, 0x91, 0x92, 0x93, 0x94, + 0xa0, 0xa1, 0xa2, 0xa3, 0xa4, 0xa5, 0xa6, 0xa7, 0xa8, 0xa9, 0xaa, 0xab, 0xac, 0xad, 0xae, 0xaf, 0xb0, 0xb1, 0xb2, 0xb3, 0xb4, + 0xc0, 0xc1, 0xc2, 0xc3, 0xc4, 0xc5, 0xc6, 0xc7, 0xc8, 0xc9, 0xca, 0xcb, 0xcc, 0xcd, 0xce, 0xcf, 0xd0, 0xd1, 0xd2, 0xd3, 0xd4, + 0}; + oled_write_P(crkbd_logo, false); +} + + +void render_status(void) { + + oled_write_P(PSTR("Layer"), false); + switch (biton32(layer_state)) { + case 0: + oled_write_P(PSTR("Base "), false); + break; + case _RAISE: + oled_write_P(PSTR("Raise"), false); + break; + case _LOWER: + oled_write_P(PSTR("Lower"), false); + break; + case _ADJUST: + oled_write_P(PSTR("Adjst"), false); + break; + default: + oled_write_P(PSTR("Unkn "), false); + break; + } + oled_write_P(PSTR("Lyout"), false); + switch (biton32(default_layer_state)) { + case _QWERTY: + oled_write_P(PSTR("QWRTY"), false); + break; + case _COLEMAK: + oled_write_P(PSTR("COLMK"), false); + break; + case _DVORAK: + oled_write_P(PSTR("DVRAK"), false); + break; + case _WORKMAN: + oled_write_P(PSTR("WRKMN"), false); + break; + case _NORMAN: + oled_write_P(PSTR("NORMN"), false); + break; + case _MALTRON: + oled_write_P(PSTR("MLTRN"), false); + break; + case _EUCALYN: + oled_write_P(PSTR("ECLYN"), false); + break; + case _CARPLAX: + oled_write_P(PSTR("CRPLX"), false); + break; + } + + uint8_t modifiers = get_mods(); + uint8_t one_shot = get_oneshot_mods(); + + oled_write_P(PSTR("Mods:"), false); + oled_write_P( (modifiers & MOD_MASK_CTRL || one_shot & MOD_MASK_CTRL ) ? PSTR(" CTL ") : PSTR(" "), false); + oled_write_P( (modifiers & MOD_MASK_GUI || one_shot & MOD_MASK_GUI ) ? PSTR(" GUI ") : PSTR(" "), false); + oled_write_P( (modifiers & MOD_MASK_ALT || one_shot & MOD_MASK_ALT ) ? PSTR(" ALT ") : PSTR(" "), false); + oled_write_P( (modifiers & MOD_MASK_SHIFT || one_shot & MOD_MASK_SHIFT) ? PSTR(" SFT ") : PSTR(" "), false); + + + oled_write_P(PSTR("BTMGK"), false); + static const char PROGMEM mode_logo[4][4] = { + {0x95,0x96,0x0a,0}, + {0xb5,0xb6,0x0a,0}, + {0x97,0x98,0x0a,0}, + {0xb7,0xb8,0x0a,0} }; + + if (keymap_config.swap_lalt_lgui != false) { + oled_write_P(mode_logo[0], false); + oled_write_P(mode_logo[1], false); + } else { + oled_write_P(mode_logo[2], false); + oled_write_P(mode_logo[3], false); + } + + uint8_t led_usb_state = host_keyboard_leds(); + oled_write_P(PSTR("Lock:"), false); + oled_write_P(led_usb_state & (1<. - */ - -#ifndef CONFIG_USER_H -#define CONFIG_USER_H - -#include QMK_KEYBOARD_CONFIG_H - -#if (defined(TAP_DANCE_ENABLE) && !defined(TAPPING_TERM)) -#define TAPPING_TERM 200 -#endif // TAP_DANCE_ENABLE - - -#define B5_AUDIO - - -#ifdef RGBLIGHT_ENABLE -#define RGB_DI_PIN D3 -#define RGBLED_NUM 14 // Number of LEDs -#define RGBLIGHT_ANIMATIONS -#define RGBLIGHT_HUE_STEP 12 -#define RGBLIGHT_SAT_STEP 12 -#define RGBLIGHT_VAL_STEP 12 -#define RGBLIGHT_EFFECT_KNIGHT_LENGTH 4 -#define RGBLIGHT_EFFECT_SNAKE_LENGTH 3 -#define RGBLIGHT_EFFECT_BREATHE_CENTER 1 -#define RGBLIGHT_SLEEP -#endif // RGBLIGHT_ENABLE - -#define FORCE_NKRO - -#endif diff --git a/keyboards/handwired/woodpad/keymaps/drashna/keymap.c b/keyboards/handwired/woodpad/keymaps/drashna/keymap.c deleted file mode 100644 index 20b4e064eb3..00000000000 --- a/keyboards/handwired/woodpad/keymaps/drashna/keymap.c +++ /dev/null @@ -1,95 +0,0 @@ -/* Copyright 2017 REPLACE_WITH_YOUR_NAME - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - */ -#include QMK_KEYBOARD_H -#include "drashna.h" - - // Each layer gets a name for readability, which is then used in the keymap matrix below. - // The underscores don't mean anything - you can have a layer called STUFF or any other name. - // Layer names don't all need to be of the same length, obviously, and you can also skip them - // entirely and just use numbers. - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { -[_NUMLOCK] = KEYMAP( /* Base */ - TG(_NAV), TG(_DIABLO), TG(_MACROS), KC_PSLS,\ - KC_P7, KC_P8, KC_P9, KC_PAST, \ - KC_P4, KC_P5, KC_P6, KC_PMNS, \ - KC_P1, KC_P2, KC_P3, KC_PPLS, \ - LT(_MEDIA,KC_P0), KC_PDOT, KC_COLN, KC_PENT \ -), -[_NAV] = KEYMAP( /* Base */ - _______, _______, _______, _______,\ - KC_HOME, KC_UP, KC_PGUP, _______, \ - KC_LEFT, XXXXXXX, KC_RIGHT, _______, \ - KC_END, KC_DOWN, KC_PGDN, _______, \ - KC_INS, KC_DEL, _______, _______ \ -), -[_DIABLO] = KEYMAP( /* Base */ - KC_ESC, _______, XXXXXXX, _______,\ - KC_S, KC_I, KC_F, KC_M, \ - KC_1, KC_2, KC_3, KC_4, \ - KC_D3_1, KC_D3_2, KC_D3_3, KC_D3_4, \ - XXXXXXX, KC_DIABLO_CLEAR, KC_Q, SFT_T(KC_SPACE) \ -), - -[_MACROS] = KEYMAP( /* Base */ - KC_OVERWATCH, XXXXXXX, _______, XXXXXXX,\ - KC_JUSTGAME, XXXXXXX, XXXXXXX, KC_C9, \ - XXXXXXX, XXXXXXX, KC_AIM, KC_GGEZ, \ - KC_SYMM, KC_TORB, XXXXXXX, KC_GOODGAME, \ - KC_SALT, KC_MORESALT, KC_SALTHARD, KC_GLHF \ -), -[_MEDIA] = KEYMAP( /* Base */ - KC_RESET, KC_MUTE, KC_VOLD, KC_VOLU,\ - KC_MAKE, _______, RGB_HUI, RGB_HUD, \ - KC_MPLY, KC_MSTP, KC_MPRV, KC_MNXT, \ - RGB_TOG, RGB_MOD, RGB_SAI, RGB_VAI, \ - _______, KC_RGB_T, RGB_SAD, RGB_VAD \ -), - -}; - - -void numlock_led_on(void) { - PORTF |= (1 << 7); -} - -void numlock_led_off(void) { - PORTF &= ~(1 << 7); -} - - - -void matrix_init_keymap(void) { - // set Numlock LED to output and low - DDRF |= (1 << 7); - PORTF &= ~(1 << 7); -} - -void matrix_scan_keymap(void) { - numlock_led_off(); - if ((is_overwatch && biton32(layer_state) == _MACROS) || (biton32(layer_state) == _NUMLOCK)) { - numlock_led_on(); - } - - // Run Diablo 3 macro checking code. -} - -void led_set_keymap(uint8_t usb_led) { - if (!(usb_led & (1<. /* Use I2C or Serial, not both */ -#define USE_SERIAL -#undef USE_I2C +// #define USE_SERIAL +#define USE_I2C /* Select hand configuration */ @@ -31,7 +31,7 @@ along with this program. If not, see . #ifdef RGBLIGHT_ENABLE #undef RGBLED_NUM #define RGBLED_NUM 18 // Number of LEDs - +#define RGBLED_SPLIT { 9, 9 } #define RGBLIGHT_HUE_STEP 12 #define RGBLIGHT_SAT_STEP 12 #define RGBLIGHT_VAL_STEP 12 @@ -55,7 +55,7 @@ along with this program. If not, see . #define QMK_SPEAKER C6 #undef PRODUCT -#ifdef KEYBOARD_iris_rev2 +#ifdef KEYBOARD_keebio_iris_rev2 #define PRODUCT Drashna Hacked Iris Rev.2 #endif diff --git a/keyboards/keebio/iris/keymaps/drashna/keymap.c b/keyboards/keebio/iris/keymaps/drashna/keymap.c index 0c3b0d6d443..b306b6928a2 100644 --- a/keyboards/keebio/iris/keymaps/drashna/keymap.c +++ b/keyboards/keebio/iris/keymaps/drashna/keymap.c @@ -121,3 +121,14 @@ void matrix_init_keymap(void) { writePinHigh(B0); #endif } + + +void keyboard_post_init_keymap(void) { +#if BACKLIGHT_ENABLE + backlight_enable(); + backlight_level(5); + #ifdef BACKLIGHT_BREATHING + breathing_enable(); + #endif +#endif +} diff --git a/keyboards/keebio/iris/keymaps/drashna/rules.mk b/keyboards/keebio/iris/keymaps/drashna/rules.mk index e8035176efb..bac5f95f3a1 100644 --- a/keyboards/keebio/iris/keymaps/drashna/rules.mk +++ b/keyboards/keebio/iris/keymaps/drashna/rules.mk @@ -5,13 +5,14 @@ CONSOLE_ENABLE = no # Console for debug(+400) COMMAND_ENABLE = no # Commands for debug and configuration TAP_DANCE_ENABLE = no RGBLIGHT_ENABLE = yes -AUDIO_ENABLE = yes +AUDIO_ENABLE = no NKRO_ENABLE = yes BACKLIGHT_ENABLE = no SWAP_HANDS_ENABLE = no -INDICATOR_LIGHTS = yes +INDICATOR_LIGHTS = no MACROS_ENABLED = no RGBLIGHT_TWINKLE = no +RGBLIGHT_STARTUP_ANIMATION = yes BOOTLOADER = qmk-dfu diff --git a/keyboards/keebio/iris/keymaps/drashna_lp/config.h b/keyboards/keebio/iris/keymaps/drashna_lp/config.h new file mode 100644 index 00000000000..4e2bf729f22 --- /dev/null +++ b/keyboards/keebio/iris/keymaps/drashna_lp/config.h @@ -0,0 +1,48 @@ +/* +Copyright 2017 Danny Nguyen + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#pragma once + +/* Use I2C or Serial, not both */ +#include "../drashna/config.h" + +#ifdef RGBLIGHT_ENABLE +#undef RGBLED_NUM +#define RGBLED_NUM 16 // Number of LEDs +#undef RGBLED_SPLIT +#define RGBLED_SPLIT { 8, 8 } +#endif + +#undef PRODUCT +#ifdef KEYBOARD_keebio_iris_rev2 +#define PRODUCT Drashna Hacked Iris LP Rev.2 (Backlit) +#endif + +#undef SHFT_LED1 +#define SHFT_LED1 5 +#undef SHFT_LED2 +#define SHFT_LED2 10 + +#undef CTRL_LED1 +#define CTRL_LED1 6 +#undef CTRL_LED2 +#define CTRL_LED2 9 + +#undef ALT_LED1 +#define ALT_LED1 7 +#undef GUI_LED1 +#define GUI_LED1 8 diff --git a/keyboards/keebio/iris/keymaps/drashna_lp/keymap.c b/keyboards/keebio/iris/keymaps/drashna_lp/keymap.c new file mode 100644 index 00000000000..ff7bd09c0cf --- /dev/null +++ b/keyboards/keebio/iris/keymaps/drashna_lp/keymap.c @@ -0,0 +1 @@ +// placeholder diff --git a/keyboards/keebio/iris/keymaps/drashna_lp/rules.mk b/keyboards/keebio/iris/keymaps/drashna_lp/rules.mk new file mode 100644 index 00000000000..d3f6f5550f9 --- /dev/null +++ b/keyboards/keebio/iris/keymaps/drashna_lp/rules.mk @@ -0,0 +1,7 @@ +USER_NAME := drashna +SRC += ../drashna/keymap.c + +include $(KEYBOARD_PATH_2)/keymaps/drashna/rules.mk + +AUDIO_ENABLE = no +BACKLIGHT_ENABLE = yes diff --git a/keyboards/keebio/iris/keymaps/drashna_old/config.h b/keyboards/keebio/iris/keymaps/drashna_old/config.h index b985c4dfc12..1b462d8cad6 100644 --- a/keyboards/keebio/iris/keymaps/drashna_old/config.h +++ b/keyboards/keebio/iris/keymaps/drashna_old/config.h @@ -23,10 +23,12 @@ along with this program. If not, see . #ifdef RGBLIGHT_ENABLE #undef RGBLED_NUM #define RGBLED_NUM 16 // Number of LEDs +#undef RGBLED_SPLIT +#define RGBLED_SPLIT { 8, 8 } #endif #undef PRODUCT -#ifdef KEYBOARD_iris_rev2 +#ifdef KEYBOARD_keebio_iris_rev2 #define PRODUCT Drashna Hacked Iris Rev.2 (16 LED) #endif diff --git a/keyboards/orthodox/keymaps/drashna/config.h b/keyboards/orthodox/keymaps/drashna/config.h index a2eaf63c302..1f04d5298c9 100644 --- a/keyboards/orthodox/keymaps/drashna/config.h +++ b/keyboards/orthodox/keymaps/drashna/config.h @@ -23,8 +23,8 @@ along with this program. If not, see . /* Use I2C or Serial, not both */ -#define USE_SERIAL -#undef USE_I2C +// #define USE_SERIAL +#define USE_I2C /* Select hand configuration */ @@ -41,6 +41,7 @@ along with this program. If not, see . #ifdef RGBLIGHT_ENABLE #define RGB_DI_PIN D3 #define RGBLED_NUM 16 // Number of LEDs +#define RGBLED_SPLIT { 8, 8 } #define RGBLIGHT_HUE_STEP 12 #define RGBLIGHT_SAT_STEP 12 diff --git a/keyboards/orthodox/keymaps/drashna/keymap.c b/keyboards/orthodox/keymaps/drashna/keymap.c index 0f23bd9aa0c..b1d40690558 100644 --- a/keyboards/orthodox/keymaps/drashna/keymap.c +++ b/keyboards/orthodox/keymaps/drashna/keymap.c @@ -38,7 +38,7 @@ uint8_t last_osm; ) \ LAYOUT_wrapper( \ KC_ESC, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, KC_BSPC, \ - KC_TAB, K11, K12, K13, K14, K15, OS_LALT, OS_LGUI, OS_RALT, OS_RGUI, K16, K17, K18, K19, K1A, KC_QUOT, \ + KC_TAB, K11, K12, K13, K14, K15, OS_LALT, OS_LGUI, OS_RALT, RAISE, K16, K17, K18, K19, K1A, KC_QUOT, \ KC_MLSF, CTL_T(K21), K22, K23, K24, K25, LOWER, KC_SPACE,KC_BSPC, KC_DEL, KC_ENT, RAISE, K26, K27, K28, K29, CTL_T(K2A), KC_MRSF \ ) #define LAYOUT_orthodox_base_wrapper(...) LAYOUT_orthodox_base(__VA_ARGS__) diff --git a/keyboards/orthodox/keymaps/drashna/rules.mk b/keyboards/orthodox/keymaps/drashna/rules.mk index a826c664a7b..fdbfc94c9ba 100644 --- a/keyboards/orthodox/keymaps/drashna/rules.mk +++ b/keyboards/orthodox/keymaps/drashna/rules.mk @@ -5,11 +5,13 @@ CONSOLE_ENABLE = no # Console for debug(+400) COMMAND_ENABLE = no # Commands for debug and configuration TAP_DANCE_ENABLE = no RGBLIGHT_ENABLE = yes -AUDIO_ENABLE = yes +AUDIO_ENABLE = no NKRO_ENABLE = yes INDICATOR_LIGHTS = yes MACROS_ENABLED = no RGBLIGHT_TWINKLE = no +RGBLIGHT_STARTUP_ANIMATION = yes + BOOTLOADER = qmk-dfu diff --git a/layouts/community/ergodox/drashna/config.h b/layouts/community/ergodox/drashna/config.h index 089441e52c2..7b2ad4fa1ca 100644 --- a/layouts/community/ergodox/drashna/config.h +++ b/layouts/community/ergodox/drashna/config.h @@ -14,4 +14,3 @@ #define PRODUCT DrashnaDox - Hacked ErgoDox EZ Shine #undef DEBOUNCE -#define DEBOUNCE 5 diff --git a/layouts/community/ergodox/drashna/keymap.c b/layouts/community/ergodox/drashna/keymap.c index 428706e2d58..e7f43ad6696 100644 --- a/layouts/community/ergodox/drashna/keymap.c +++ b/layouts/community/ergodox/drashna/keymap.c @@ -44,10 +44,10 @@ bool skip_leds = false; KC_TAB, K01, K02, K03, K04, K05, TG(_DIABLO), TG(_DIABLO), K06, K07, K08, K09, K0A, KC_BSLS, \ KC_C1R3, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, KC_QUOT, \ KC_MLSF, CTL_T(K21), K22, K23, K24, K25, TG(_GAMEPAD), TG(_GAMEPAD), K26, K27, K28, K29, CTL_T(K2A), KC_MRSF, \ - KC_GRV, OS_MEH, OS_HYPR, KC_LBRC, KC_RBRC, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT, UC(0x2E2E), \ - OS_LALT, OS_LGUI, OS_RGUI, CTL_T(KC_ESCAPE), \ - KC_HOME, KC_PGUP, \ - LT(_LOWER, KC_SPACE),KC_BSPC, KC_END, KC_PGDN, KC_DEL, LT(_RAISE, KC_ENTER) \ + KC_GRV, OS_MEH, OS_HYPR, KC_LBRC, KC_RBRC, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT, UC(0x2E2E), \ + OS_LALT, OS_LGUI, OS_RGUI, CTL_T(KC_ESCAPE), \ + KC_APP, KC_MENU, \ + KC_SPC, LT(_LOWER, KC_BSPC), OS_LWR, OS_RSE, LT(_RAISE, KC_DEL), KC_ENT \ ) #define LAYOUT_ergodox_pretty_base_wrapper(...) LAYOUT_ergodox_pretty_base(__VA_ARGS__) @@ -270,8 +270,8 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { [_LOWER] = LAYOUT_ergodox_pretty_wrapper( KC_F12, _________________FUNC_LEFT_________________, _______, _______, _________________FUNC_RIGHT________________, KC_F11, - KC_TILD, _________________LOWER_L1__________________, _______, _______, _________________LOWER_R1__________________, _______, - _______, ___________________BLANK___________________, _________________LOWER_R2__________________, KC_PIPE, + KC_TILD, _________________LOWER_L1__________________, _______, _______, _________________LOWER_R1__________________, KC_PIPE, + _______, ___________________BLANK___________________, _________________LOWER_R2__________________, KC_DQUO, _______, ___________________BLANK___________________, _______, _______, _________________LOWER_R3__________________, KC_PSCR, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_PAUS, _______, _______, _______, _______, @@ -281,8 +281,8 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { [_RAISE] = LAYOUT_ergodox_pretty_wrapper( KC_F12, _________________FUNC_LEFT_________________, _______, _______, _________________FUNC_RIGHT________________, KC_F11, - KC_GRV, _________________RAISE_L1__________________, _______, _______, _________________RAISE_R1__________________, _______, - _______, _________________RAISE_L2__________________, _________________RAISE_R2__________________, KC_BSLS, + KC_GRV, _________________RAISE_L1__________________, _______, _______, _________________RAISE_R1__________________, KC_BSLS, + _______, _________________RAISE_L2__________________, _________________RAISE_R2__________________, KC_QUOT, _______, _________________RAISE_L3__________________, _______, _______, _________________RAISE_R3__________________, KC_PSCR, _______, _______, _______, _______, _______, KC_HOME, KC_PGDN, KC_PGUP, KC_END, KC_SLCK, _______, _______, _______, _______, diff --git a/layouts/community/ergodox/drashna/rules.mk b/layouts/community/ergodox/drashna/rules.mk index 31488108b98..ee231321e3b 100644 --- a/layouts/community/ergodox/drashna/rules.mk +++ b/layouts/community/ergodox/drashna/rules.mk @@ -14,3 +14,6 @@ UNICDOEMAP_ENABLE = no MACROS_ENABLED = no RGBLIGHT_TWINKLE = no INDICATOR_LIGHTS = no +RGBLIGHT_STARTUP_ANIMATION = yes + +DEBOUNCE_TYPE = eager_pk diff --git a/layouts/community/ergodox/drashna_glow/config.h b/layouts/community/ergodox/drashna_glow/config.h index a10c4bb297c..e2d95942675 100644 --- a/layouts/community/ergodox/drashna_glow/config.h +++ b/layouts/community/ergodox/drashna_glow/config.h @@ -5,17 +5,11 @@ #undef PRODUCT #define PRODUCT DrashnaDox - Hacked ErgoDox EZ Glow -#undef DEBOUNCE -#define DEBOUNCE 5 - #ifdef RGB_MATRIX_ENABLE -// #define RGB_MATRIX_KEYPRESSES // reacts to keypresses (will slow down matrix scan by a lot) +#define RGB_MATRIX_KEYPRESSES // reacts to keypresses (will slow down matrix scan by a lot) // #define RGB_MATRIX_KEYRELEASES // reacts to keyreleases (not recommened) // #define RGB_DISABLE_AFTER_TIMEOUT 0 // number of ticks to wait until disabling effects #define RGB_DISABLE_WHEN_USB_SUSPENDED true// turn off effects when suspended // #define RGB_MATRIX_MAXIMUM_BRIGHTNESS 200 // limits maximum brightness of LEDs to 200 out of 255. If not defined maximum brightness is set to 255 // #define EECONFIG_RGB_MATRIX (uint32_t *)16 #endif - -#undef DEBOUNCE -#define DEBOUNCE 1 diff --git a/layouts/community/ergodox/drashna_glow/rules.mk b/layouts/community/ergodox/drashna_glow/rules.mk index 5cb47dae4e3..ae9a2fb16c2 100644 --- a/layouts/community/ergodox/drashna_glow/rules.mk +++ b/layouts/community/ergodox/drashna_glow/rules.mk @@ -1,7 +1,10 @@ USER_NAME := drashna -SRC += ../drashna/keymap.c --include $(LAYOUT_KEYMAP_PATH)/../drashna/rules.mk +CORRECTED_LAYOUT := $(LAYOUTS_REPO)/$(LAYOUT)/drashna + +SRC += $(CORRECTED_LAYOUT)/keymap.c + +-include $(CORRECTED_LAYOUT)/rules.mk ifneq (,$(findstring ergodox_ez,$(KEYBOARD))) RGBLIGHT_ENABLE = no diff --git a/layouts/community/numpad_5x6/drashna/config.h b/layouts/community/numpad_5x6/drashna/config.h index ec66940e022..e3a70694a78 100644 --- a/layouts/community/numpad_5x6/drashna/config.h +++ b/layouts/community/numpad_5x6/drashna/config.h @@ -14,5 +14,7 @@ #define RGBLIGHT_EFFECT_BREATHE_CENTER 1 #endif // RGBLIGHT_ENABLE - -#define TAP_CODE_DELAY 10 +#if defined(KEYBOARD_primekb_prime_m) +#undef PRODUCT +#define PRODUCT Drashna Hacked Prime_M Macro Pad +#endif diff --git a/layouts/community/numpad_5x6/drashna/rules.mk b/layouts/community/numpad_5x6/drashna/rules.mk index ed6fa8c7919..62bbc365d17 100644 --- a/layouts/community/numpad_5x6/drashna/rules.mk +++ b/layouts/community/numpad_5x6/drashna/rules.mk @@ -7,3 +7,4 @@ INDICATOR_LIGHTS = no RGBLIGHT_TWINKLE = yes MACROS_ENABLED = no MAKE_BOOTLOADER = yes +RGBLIGHT_STARTUP_ANIMATION = yes diff --git a/layouts/community/ortho_4x12/drashna/config.h b/layouts/community/ortho_4x12/drashna/config.h index 1858ee3a4f5..f8e12f33d7e 100644 --- a/layouts/community/ortho_4x12/drashna/config.h +++ b/layouts/community/ortho_4x12/drashna/config.h @@ -36,6 +36,17 @@ #endif // KEYBOARD_planck_light +#if defined(KEYBOARD_planck) +#undef PRODUCT +#if defined(KEYBOARD_planck_light) +#define PRODUCT Drashna Hacked RGB Beacon (Planck Light) +#elif defined(KEYBOARD_planck_rev6) +#define PRODUCT Drashna Hacked Planck Rev6 +#elif defined(KEYBOARD_planck_EZ) +#define PRODUCT Drashna Hacked Planck EZ +#endif +#endif + /* * MIDI options */ @@ -59,5 +70,3 @@ /* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */ //#define MIDI_TONE_KEYCODE_OCTAVES 2 - -#define TAP_CODE_DELAY 10 diff --git a/layouts/community/ortho_4x12/drashna/keymap.c b/layouts/community/ortho_4x12/drashna/keymap.c index 28da1b20427..16defede967 100644 --- a/layouts/community/ortho_4x12/drashna/keymap.c +++ b/layouts/community/ortho_4x12/drashna/keymap.c @@ -139,10 +139,8 @@ bool process_record_keymap(uint16_t keycode, keyrecord_t *record) { #ifdef BACKLIGHT_ENABLE backlight_step(); #endif - PORTE &= ~(1<<6); } else { unregister_code(KC_RSFT); - PORTE |= (1<<6); } return false; break; diff --git a/layouts/community/ortho_4x12/drashna/rules.mk b/layouts/community/ortho_4x12/drashna/rules.mk index f8804326745..89acba9eb81 100644 --- a/layouts/community/ortho_4x12/drashna/rules.mk +++ b/layouts/community/ortho_4x12/drashna/rules.mk @@ -6,13 +6,15 @@ COMMAND_ENABLE = no # Commands for debug and configuration TAP_DANCE_ENABLE = no AUDIO_ENABLE = yes ifeq (,$(findstring planck/rev6,$(KEYBOARD))) # Make sure it's NOT the Planck Rev6 - RGBLIGHT_ENABLE = yes - INDICATOR_LIGHTS = yes - RGBLIGHT_TWINKLE = yes + RGBLIGHT_ENABLE = yes + INDICATOR_LIGHTS = yes + RGBLIGHT_TWINKLE = yes + RGBLIGHT_STARTUP_ANIMATION = yes endif ifneq (,$(findstring planck/light,$(KEYBOARD))) # Make sure it IS the Planck Light - RGB_MATRIX_ENABLE = yes - RGBLIGHT_ENABLE = yes + RGB_MATRIX_ENABLE = yes + RGBLIGHT_ENABLE = no + RGBLIGHT_STARTUP_ANIMATION = no endif ifeq ($(strip $(PROTOCOL)), VUSB) diff --git a/layouts/community/ortho_5x12/drashna/config.h b/layouts/community/ortho_5x12/drashna/config.h index e41dadc6015..480bf658c36 100644 --- a/layouts/community/ortho_5x12/drashna/config.h +++ b/layouts/community/ortho_5x12/drashna/config.h @@ -13,4 +13,10 @@ #define RGBLIGHT_SAT_STEP 8 #undef RGBLIGHT_VAL_STEP #define RGBLIGHT_VAL_STEP 8 + #define RGBLIGHT_LIMIT_VAL 175 + #define RGBLIGHT_SLEEP + + #define RGBLIGHT_EFFECT_KNIGHT_OFFSET 3 + #define RGBLIGHT_EFFECT_KNIGHT_LED_NUM 14 + #endif diff --git a/users/drashna/.gitignore b/users/drashna/.gitignore new file mode 100644 index 00000000000..f84d34d9079 --- /dev/null +++ b/users/drashna/.gitignore @@ -0,0 +1,3 @@ +secrets.c +secrets.h +drashna_song_list.h \ No newline at end of file diff --git a/users/drashna/.gitlab-ci.yml b/users/drashna/.gitlab-ci.yml index 9b18d44fb32..92813a27d3e 100644 --- a/users/drashna/.gitlab-ci.yml +++ b/users/drashna/.gitlab-ci.yml @@ -3,7 +3,7 @@ stages: - build - deploy -Tests: +Preliminary Test: stage: test variables: GIT_SUBMODULE_STRATEGY: recursive @@ -12,12 +12,12 @@ Tests: image: ubuntu:18.10 before_script: - apt-get update -qy - - apt-get install -y build-essential avr-libc binutils-arm-none-eabi binutils-avr dfu-programmer dfu-util gcc gcc-arm-none-eabi gcc-avr git libnewlib-arm-none-eabi unzip wget zip + - apt-get install -y build-essential avr-libc binutils-arm-none-eabi binutils-avr dfu-programmer dfu-util gcc gcc-arm-none-eabi git libnewlib-arm-none-eabi gcc-avr unzip wget zip - avr-gcc --version - uname -a script: - make test:all - - make planck/rev6:default + - make planck/rev6:default planck/rev5:default QMK Firmware Defaults: stage: deploy @@ -47,29 +47,7 @@ Drashna Firmware: - apt-get install -y build-essential avr-libc binutils-arm-none-eabi binutils-avr dfu-programmer dfu-util gcc gcc-arm-none-eabi gcc-avr git libnewlib-arm-none-eabi unzip wget zip - avr-gcc --version script: - - make iris/rev2:drashna iris/rev2:drashna_old ergodox_ez:drashna ergodox_ez:drashna_glow viterbi/rev1:drashna orthodox/rev1:drashna orthodox/rev3:drashna crkbd:drashna planck/light:drashna planck/rev6:drashna fractal:drashna - artifacts: - name: "$CI_JOB_NAME-$CI_COMMIT_REF_SLUG" - paths: - - ./*.hex - - ./*.bin - expire_in: 1 month - -Firmware Deploy: - stage: deploy - dependencies: - - Drashna Firmware - variables: - GIT_SUBMODULE_STRATEGY: recursive - tags: - - linux - image: ubuntu:18.10 - before_script: - - apt-get update -qy - - apt-get install -y build-essential avr-libc binutils-arm-none-eabi binutils-avr dfu-programmer dfu-util gcc gcc-arm-none-eabi gcc-avr git libnewlib-arm-none-eabi unzip wget zip - - avr-gcc --version - script: - - make iris/rev2:drashna:production iris/rev2:drashna_old:production ergodox_ez:drashna ergodox_ez:drashna_glow viterbi/rev1:drashna:production orthodox/rev1:drashna:production orthodox/rev3:drashna:production crkbd:drashna:production planck/light:drashna planck/rev6:drashna fractal:drashna:production + - make keebio/iris/rev2:drashna keebio/iris/rev2:drashna_old ergodox_ez:drashna ergodox_ez:drashna_glow keebio/viterbi/rev1:drashna orthodox/rev1:drashna orthodox/rev3:drashna crkbd:drashna planck/light:drashna planck/rev6:drashna fractal:drashna primekb/prime_m:drashna -j16 --output-sync artifacts: name: "$CI_JOB_NAME-$CI_COMMIT_REF_SLUG" paths: diff --git a/users/drashna/config.h b/users/drashna/config.h index 2abd326dac9..1680eb4cb11 100644 --- a/users/drashna/config.h +++ b/users/drashna/config.h @@ -82,4 +82,4 @@ #define NO_ACTION_MACRO #define NO_ACTION_FUNCTION -#define MACRO_TIMER 5 +#define TAP_CODE_DELAY 5 diff --git a/users/drashna/drashna.c b/users/drashna/drashna.c index 6968a4b9285..ec249dd2244 100644 --- a/users/drashna/drashna.c +++ b/users/drashna/drashna.c @@ -38,9 +38,9 @@ bool send_game_macro(const char *str, keyrecord_t *record, bool override) { } clear_keyboard(); tap_code(keycode); - wait_ms(50); - send_string_with_delay(str, MACRO_TIMER); - wait_ms(50); + wait_ms(TAP_CODE_DELAY); + send_string_with_delay(str, TAP_CODE_DELAY); + wait_ms(TAP_CODE_DELAY); tap_code(KC_ENTER); } if (override) wait_ms(3000); @@ -53,12 +53,10 @@ bool mod_key_press_timer (uint16_t code, uint16_t mod_code, bool pressed) { this_timer= timer_read(); } else { if (timer_elapsed(this_timer) < TAPPING_TERM){ - register_code(code); - unregister_code(code); + tap_code(code); } else { register_code(mod_code); - register_code(code); - unregister_code(code); + tap_code(code); unregister_code(mod_code); } } @@ -70,12 +68,10 @@ bool mod_key_press (uint16_t code, uint16_t mod_code, bool pressed, uint16_t thi this_timer= timer_read(); } else { if (timer_elapsed(this_timer) < TAPPING_TERM){ - register_code(code); - unregister_code(code); + tap_code(code); } else { register_code(mod_code); - register_code(code); - unregister_code(code); + tap_code(code); unregister_code(mod_code); } } diff --git a/users/drashna/drashna.h b/users/drashna/drashna.h index c19b1894346..6645626d981 100644 --- a/users/drashna/drashna.h +++ b/users/drashna/drashna.h @@ -27,7 +27,11 @@ along with this program. If not, see . #if defined(RGBLIGHT_ENABLE) || defined(RGB_MATRIX_ENABLE) #include "rgb_stuff.h" #endif - +#if defined(AUDIO_ENABLE) && __GNUC__ > 7 + #if __has_include("drashna_song_list.h") + #include "drashna_song_list.h" + #endif +#endif /* Define layer names */ enum userspace_layers { diff --git a/users/drashna/process_records.c b/users/drashna/process_records.c index 2d9025b375b..2b6ccf510cb 100644 --- a/users/drashna/process_records.c +++ b/users/drashna/process_records.c @@ -18,7 +18,7 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) { // If console is enabled, it will print the matrix position and status of each key pressed #ifdef KEYLOGGER_ENABLE - #if defined(KEYBOARD_ergodox_ez) || defined(KEYBOARD_iris_rev2) + #if defined(KEYBOARD_ergodox_ez) || defined(KEYBOARD_keebio_iris_rev2) xprintf("KL: kc: %u, col: %u, row: %u, pressed: %u\n", keycode, record->event.key.row, record->event.key.col, record->event.pressed); #else xprintf("KL: kc: %u, col: %u, row: %u, pressed: %u\n", keycode, record->event.key.col, record->event.key.row, record->event.pressed); @@ -37,31 +37,29 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) { uint8_t temp_mod = get_mods(); uint8_t temp_osm = get_oneshot_mods(); clear_mods(); clear_oneshot_mods(); - send_string_with_delay_P(PSTR("make " QMK_KEYBOARD ":" QMK_KEYMAP), MACRO_TIMER); + send_string_with_delay_P(PSTR("make " QMK_KEYBOARD ":" QMK_KEYMAP), TAP_CODE_DELAY); #ifndef MAKE_BOOTLOADER if ( ( temp_mod | temp_osm ) & MOD_MASK_SHIFT ) #endif { #if defined(__arm__) - send_string_with_delay_P(PSTR(":dfu-util"), MACRO_TIMER); + send_string_with_delay_P(PSTR(":dfu-util"), TAP_CODE_DELAY); #elif defined(BOOTLOADER_DFU) - send_string_with_delay_P(PSTR(":dfu"), MACRO_TIMER); + send_string_with_delay_P(PSTR(":dfu"), TAP_CODE_DELAY); #elif defined(BOOTLOADER_HALFKAY) - send_string_with_delay_P(PSTR(":teensy"), MACRO_TIMER); + send_string_with_delay_P(PSTR(":teensy"), TAP_CODE_DELAY); #elif defined(BOOTLOADER_CATERINA) - send_string_with_delay_P(PSTR(":avrdude"), MACRO_TIMER); + send_string_with_delay_P(PSTR(":avrdude"), TAP_CODE_DELAY); #endif // bootloader options } - if ( ( temp_mod | temp_osm ) & MOD_MASK_CTRL) { send_string_with_delay_P(PSTR(" -j8 --output-sync"), MACRO_TIMER); } - send_string_with_delay_P(PSTR(SS_TAP(X_ENTER)), MACRO_TIMER); - set_mods(temp_mod); - set_oneshot_mods(temp_osm); + if ( ( temp_mod | temp_osm ) & MOD_MASK_CTRL) { send_string_with_delay_P(PSTR(" -j8 --output-sync"), TAP_CODE_DELAY); } + send_string_with_delay_P(PSTR(SS_TAP(X_ENTER)), TAP_CODE_DELAY); } break; case VRSN: // Prints firmware version if (record->event.pressed) { - send_string_with_delay_P(PSTR(QMK_KEYBOARD "/" QMK_KEYMAP " @ " QMK_VERSION ", Built on: " QMK_BUILDDATE), MACRO_TIMER); + send_string_with_delay_P(PSTR(QMK_KEYBOARD "/" QMK_KEYMAP " @ " QMK_VERSION ", Built on: " QMK_BUILDDATE), TAP_CODE_DELAY); } break; diff --git a/users/drashna/process_records.h b/users/drashna/process_records.h index f7f2193ec6b..5e3374d3f2c 100644 --- a/users/drashna/process_records.h +++ b/users/drashna/process_records.h @@ -56,6 +56,8 @@ bool process_record_keymap(uint16_t keycode, keyrecord_t *record); #define ADJUST MO(_ADJUST) #define TG_MODS TG(_MODS) #define TG_GAME TG(_GAMEPAD) +#define OS_LWR OSL(_LOWER) +#define OS_RSE OSL(_RAISE) #define KC_SEC1 KC_SECRET_1 #define KC_SEC2 KC_SECRET_2 diff --git a/users/drashna/rgb_stuff.c b/users/drashna/rgb_stuff.c index a98ad590cc7..b5e145842f6 100644 --- a/users/drashna/rgb_stuff.c +++ b/users/drashna/rgb_stuff.c @@ -247,17 +247,20 @@ bool process_record_user_rgb(uint16_t keycode, keyrecord_t *record) { void keyboard_post_init_rgb(void) { -#ifdef RGBLIGHT_ENABLE - rgblight_enable_noeeprom(); - layer_state_set_user(layer_state); - uint16_t old_hue = rgblight_config.hue; - rgblight_mode_noeeprom(RGBLIGHT_MODE_STATIC_LIGHT); - for (uint16_t i = 360; i > 0; i--) { - rgblight_sethsv_noeeprom( ( i + old_hue) % 360, 255, 255); - wait_ms(10); - } - layer_state_set_user(layer_state); +#if defined(RGBLIGHT_ENABLE) && defined(RGBLIGHT_STARTUP_ANIMATION) + if (userspace_config.rgb_layer_change) { rgblight_enable_noeeprom(); } + if (rgblight_config.enable) { + layer_state_set_user(layer_state); + uint16_t old_hue = rgblight_config.hue; + rgblight_mode_noeeprom(RGBLIGHT_MODE_STATIC_LIGHT); + for (uint16_t i = 360; i > 0; i--) { + rgblight_sethsv_noeeprom( ( i + old_hue) % 360, 255, 255); + matrix_scan(); + wait_ms(10); + } + } #endif + layer_state_set_user(layer_state); } void matrix_scan_rgb(void) { @@ -278,7 +281,7 @@ uint32_t layer_state_set_rgb(uint32_t state) { switch (biton32(state)) { case _MACROS: rgblight_sethsv_noeeprom_orange(); - userspace_config.is_overwatch ? rgblight_effect_snake(RGBLIGHT_MODE_SNAKE + 2) : rgblight_effect_snake(RGBLIGHT_MODE_SNAKE + 3); + userspace_config.is_overwatch ? rgblight_mode_noeeprom(RGBLIGHT_MODE_SNAKE + 2) : rgblight_mode_noeeprom(RGBLIGHT_MODE_SNAKE + 3); break; case _MEDIA: rgblight_sethsv_noeeprom_chartreuse(); diff --git a/users/drashna/rules.mk b/users/drashna/rules.mk index 5050704a53b..bef25e25948 100644 --- a/users/drashna/rules.mk +++ b/users/drashna/rules.mk @@ -9,7 +9,9 @@ ifeq ($(strip $(TAP_DANCE_ENABLE)), yes) SRC += tap_dances.c endif -EXTRAFLAGS += -flto +ifeq ($(PLATFORM),AVR) + EXTRAFLAGS += -flto +endif ifeq ($(strip $(NO_SECRETS)), yes) OPT_DEFS += -DNO_SECRETS @@ -26,6 +28,9 @@ ifeq ($(strip $(RGBLIGHT_ENABLE)), yes) ifeq ($(strip $(RGBLIGHT_NOEEPROM)), yes) OPT_DEFS += -DRGBLIGHT_NOEEPROM endif + ifeq ($(strip $(RGBLIGHT_STARTUP_ANIMATION)), yes) + OPT_DEFS += -DRGBLIGHT_STARTUP_ANIMATION + endif endif ifeq ($(strip $(RGB_MATRIX_ENABLE)), yes)