Branch point for 2019 Nov 30 Breaking Change.

* move canoe into percent directory

* update readme for new make path

* move skog into percent directory

* update readme for new path and new instructions

* update readme

* fix error in naming

.vscode/extensions.json

@@ -1,6 +1,11 @@
 // Suggested extensions
 {
   "recommendations": [
-    "EditorConfig.EditorConfig"
+    "EditorConfig.EditorConfig",
+    "xaver.clang-format",
+    "ms-vscode.cpptools",
+    "bierner.github-markdown-preview",
+    "donjayamanne.git-extension-pack",
+    "CoenraadS.bracket-pair-colorizer-2"
   ]
 }

.vscode/settings.json

@@ -8,10 +8,12 @@
         "**/*.hex": true
     },
     "files.associations": {
-        "*.h": "c",
+      "*.h": "c",
-        "*.c": "c",
+      "*.c": "c",
-        "*.cpp": "cpp",
+      "*.cpp": "cpp",
-        "*.hpp": "cpp",
+      "*.hpp": "cpp",
-        "xstddef": "c"
+      "xstddef": "c",
+      "type_traits": "c",
+      "utility": "c"
     }
 }

Makefile

@@ -371,6 +371,9 @@ define PARSE_KEYBOARD
     # The same if all was specified
     else ifeq ($$(call COMPARE_AND_REMOVE_FROM_RULE,all),true)
         $$(eval $$(call PARSE_ALL_KEYMAPS))
+    # List all keymaps for the given keyboard
+    else ifeq ($$(call COMPARE_AND_REMOVE_FROM_RULE,list-keymaps),true)
+        $$(eval $$(call LIST_ALL_KEYMAPS))
     # Try to match the specified keyamp with the list of known keymaps
     else ifeq ($$(call TRY_TO_MATCH_RULE_FROM_LIST,$$(KEYMAPS)),true)
         $$(eval $$(call PARSE_KEYMAP,$$(MATCHED_ITEM)))
@@ -407,6 +410,16 @@ endef
 #     endif
 # endef
 
+# Prints a list of all known keymaps for the given keyboard
+define LIST_ALL_KEYMAPS
+    COMMAND_true_LIST_KEYMAPS := \
+        printf "$$(KEYMAPS)\n";
+    COMMAND_false_LIST_KEYMAPS := \
+        printf "$$(MSG_AVAILABLE_KEYMAPS)\n"; \
+        printf "$$(KEYMAPS)\n";
+    COMMANDS += LIST_KEYMAPS
+endef
+
 # $1 Keymap
 # This is the meat of compiling a keyboard, when entering this, everything is known
 # keyboard, subproject, and keymap

bootloader.mk

@@ -19,12 +19,14 @@
 #
 # Sets the bootloader defined in the keyboard's/keymap's rules.mk
 # Current options:
-#   atmel-dfu
+#
-#   lufa-dfu
+# halfkay        PJRC Teensy
-#   qmk-dfu
+# caterina       Pro Micro (Sparkfun/generic)
-#   halfkay
+# atmel-dfu      Atmel factory DFU
-#   caterina
+# lufa-dfu       LUFA DFU
-#   bootloadHID
+# qmk-dfu        QMK DFU (LUFA + blinkenlight)
+# bootloadHID    HIDBootFlash compatible (ATmega32A)
+# USBasp         USBaspLoader (ATmega328P)
 #
 # BOOTLOADER_SIZE can still be defined manually, but it's recommended
 # you add any possible configuration to this list
@@ -32,40 +34,40 @@
 ifeq ($(strip $(BOOTLOADER)), atmel-dfu)
     OPT_DEFS += -DBOOTLOADER_ATMEL_DFU
     OPT_DEFS += -DBOOTLOADER_DFU
-    ifeq ($(strip $(MCU)), atmega32u4)
+    ifneq (,$(filter $(MCU), at90usb646 atmega16u2 atmega16u4 atmega32u2 atmega32u4))
-      BOOTLOADER_SIZE = 4096
+        BOOTLOADER_SIZE = 4096
     endif
     ifeq ($(strip $(MCU)), at90usb1286)
-      BOOTLOADER_SIZE = 8192
+        BOOTLOADER_SIZE = 8192
     endif
 endif
 ifeq ($(strip $(BOOTLOADER)), lufa-dfu)
     OPT_DEFS += -DBOOTLOADER_LUFA_DFU
     OPT_DEFS += -DBOOTLOADER_DFU
-    ifeq ($(strip $(MCU)), atmega32u4)
+    ifneq (,$(filter $(MCU), at90usb646 atmega16u2 atmega16u4 atmega32u2 atmega32u4))
-      BOOTLOADER_SIZE = 4096
+        BOOTLOADER_SIZE = 4096
     endif
     ifeq ($(strip $(MCU)), at90usb1286)
-      BOOTLOADER_SIZE = 8192
+        BOOTLOADER_SIZE = 8192
     endif
 endif
 ifeq ($(strip $(BOOTLOADER)), qmk-dfu)
     OPT_DEFS += -DBOOTLOADER_QMK_DFU
     OPT_DEFS += -DBOOTLOADER_DFU
-    ifeq ($(strip $(MCU)), atmega32u4)
+    ifneq (,$(filter $(MCU), at90usb646 atmega16u2 atmega16u4 atmega32u2 atmega32u4))
-      BOOTLOADER_SIZE = 4096
+        BOOTLOADER_SIZE = 4096
     endif
     ifeq ($(strip $(MCU)), at90usb1286)
-      BOOTLOADER_SIZE = 8192
+        BOOTLOADER_SIZE = 8192
     endif
 endif
 ifeq ($(strip $(BOOTLOADER)), halfkay)
     OPT_DEFS += -DBOOTLOADER_HALFKAY
     ifeq ($(strip $(MCU)), atmega32u4)
-      BOOTLOADER_SIZE = 512
+        BOOTLOADER_SIZE = 512
     endif
     ifeq ($(strip $(MCU)), at90usb1286)
-      BOOTLOADER_SIZE = 1024
+        BOOTLOADER_SIZE = 1024
     endif
 endif
 ifeq ($(strip $(BOOTLOADER)), caterina)

common_features.mk

@@ -267,20 +267,21 @@ ifeq ($(strip $(ENCODER_ENABLE)), yes)
     OPT_DEFS += -DENCODER_ENABLE
 endif
 
-ifeq ($(strip $(HAPTIC_ENABLE)), DRV2605L)
+HAPTIC_ENABLE ?= no
-    COMMON_VPATH += $(DRIVER_PATH)/haptic
+ifneq ($(strip $(HAPTIC_ENABLE)),no)
-    SRC += haptic.c
+	COMMON_VPATH += $(DRIVER_PATH)/haptic
+	SRC += haptic.c
+	OPT_DEFS += -DHAPTIC_ENABLE
+endif
+
+ifneq ($(filter DRV2605L, $(HAPTIC_ENABLE)), )
     SRC += DRV2605L.c
     QUANTUM_LIB_SRC += i2c_master.c
-    OPT_DEFS += -DHAPTIC_ENABLE
     OPT_DEFS += -DDRV2605L
 endif
 
-ifeq ($(strip $(HAPTIC_ENABLE)), SOLENOID)
+ifneq ($(filter SOLENOID, $(HAPTIC_ENABLE)), )
-    COMMON_VPATH += $(DRIVER_PATH)/haptic
-    SRC += haptic.c
     SRC += solenoid.c
-    OPT_DEFS += -DHAPTIC_ENABLE
     OPT_DEFS += -DSOLENOID_ENABLE
 endif
 

docs/driver_installation_zadig.md

@@ -8,10 +8,14 @@ We recommend the use of the [Zadig](https://zadig.akeo.ie/) utility. If you have
 
 ## Installation
 
-Place your keyboard into the bootloader mode, either by hitting the `RESET` keycode (which may be on a different layer), or by pressing the reset switch usually located on the underside of the board. If your keyboard has neither, try holding Escape, or Space+`B`, as you plug it in (see the [Bootmagic](feature_bootmagic.md) docs for more details).
+Put your keyboard into bootloader mode, either by hitting the `RESET` keycode (which may be on a different layer), or by pressing the reset switch that's usually located on the underside of the board. If your keyboard has neither, try holding Escape or Space+`B` as you plug it in (see the [Bootmagic](feature_bootmagic.md) docs for more details). Some boards use [Command](feature_command.md) instead of Bootmagic; in this case, you can enter bootloader mode by hitting Left Shift+Right Shift+`B` or Left Shift+Right Shift+Escape at any point while the keyboard is plugged in.
-Some keyboards may have specific instructions for entering the bootloader, for example the [Bootmagic Lite](feature_bootmagic.md#bootmagic-lite) key (Escape) might be on a different key, such as Left Control. Refer to the board's README if you are unsure.
+Some keyboards may have specific instructions for entering the bootloader. For example, the [Bootmagic Lite](feature_bootmagic.md#bootmagic-lite) key (default: Escape) might be on a different key, e.g. Left Control; or the magic combination for Command (default: Left Shift+Right Shift) might require you to hold something else, e.g. Left Control+Right Control. Refer to the board's README file if you are unsure.
+
+To put a device in bootloader mode with USBaspLoader, tap the `RESET` button while holding down the `BOOT` button.
+Alternatively, hold `BOOT` while inserting the USB cable.
+
+Zadig will automatically detect the bootloader device. You may sometimes need to check **Options → List All Devices**.
 
-Zadig will automatically detect the bootloader device. You may sometimes need to check **Options -> List All Devices**.
  - For keyboards with Atmel AVR MCUs, the bootloader will be named something similar to `ATm32U4DFU`, and have a Vendor ID of `03EB`.
  - USBasp bootloaders will appear as `USBasp`, with a VID/PID of `16C0:05DC`.
  - AVR keyboards flashed with the QMK-DFU bootloader will be named `<keyboard name> Bootloader` and will also have the VID `03EB`.
@@ -19,7 +23,7 @@ Zadig will automatically detect the bootloader device. You may sometimes need to
 
 !> If Zadig lists one or more devices with the `HidUsb` driver, your keyboard is probably not in bootloader mode. The arrow will be colored orange and you will be asked to confirm modifying a system driver. **Do not** proceed if this is the case!
 
-If the arrow appears green, select the driver, and click **Install Driver**. The `libusb-win32` driver will usually work for AVR, and `WinUSB` for ARM, but if you still cannot flash the board, try installing a different driver from the list.
+If the arrow appears green, select the driver, and click **Install Driver**. The `libusb-win32` driver will usually work for AVR, and `WinUSB` for ARM, but if you still cannot flash the board, try installing a different driver from the list. For flashing a USBaspLoader device via command line with msys2, the `libusbk` driver is recommended, otherwise `libusb-win32` will work fine if you are using QMK Toolbox for flashing.
 
 ![Zadig with a bootloader driver correctly installed](https://i.imgur.com/b8VgXzx.png)
 
@@ -39,4 +43,4 @@ Right-click it and hit **Uninstall device**. Make sure to tick **Delete the driv
 
 ![The Device Uninstall dialog, with the "delete driver" checkbox ticked](https://i.imgur.com/aEs2RuA.png)
 
-Click **Action -> Scan for hardware changes**. At this point, you should be able to type again. Double check in Zadig that the keyboard device(s) are using the `HidUsb` driver. If so, you're all done, and your board should be functional again!
+Click **Action → Scan for hardware changes**. At this point, you should be able to type again. Double check in Zadig that the keyboard device(s) are using the `HidUsb` driver. If so, you're all done, and your board should be functional again!

docs/feature_backlight.md

@@ -32,16 +32,18 @@ This feature is distinct from both the [RGB underglow](feature_rgblight.md) and
 
 Hardware PWM is supported according to the following table:
 
-|Backlight Pin|AT90USB64/128|ATmega16/32U4|ATmega16/32U2|ATmega32A|
+|Backlight Pin|AT90USB64/128|ATmega16/32U4|ATmega16/32U2|ATmega32A|ATmega328P|
-|-------------|-------------|-------------|-------------|---------|
+|-------------|-------------|-------------|-------------|---------|----------|
-|`B5`         |Timer 1      |Timer 1      |             |         |
+|`B1`         |             |             |             |         |Timer 1   |
-|`B6`         |Timer 1      |Timer 1      |             |         |
+|`B2`         |             |             |             |         |Timer 1   |
-|`B7`         |Timer 1      |Timer 1      |Timer 1      |         |
+|`B5`         |Timer 1      |Timer 1      |             |         |          |
-|`C4`         |Timer 3      |             |             |         |
+|`B6`         |Timer 1      |Timer 1      |             |         |          |
-|`C5`         |Timer 3      |             |Timer 1      |         |
+|`B7`         |Timer 1      |Timer 1      |Timer 1      |         |          |
-|`C6`         |Timer 3      |Timer 3      |Timer 1      |         |
+|`C4`         |Timer 3      |             |             |         |          |
-|`D4`         |             |             |             |Timer 1  |
+|`C5`         |Timer 3      |             |Timer 1      |         |          |
-|`D5`         |             |             |             |Timer 1  |
+|`C6`         |Timer 3      |Timer 3      |Timer 1      |         |          |
+|`D4`         |             |             |             |Timer 1  |          |
+|`D5`         |             |             |             |Timer 1  |          |
 
 All other pins will use software PWM. If the [Audio](feature_audio.md) feature is disabled or only using one timer, the backlight PWM can be triggered by a hardware timer:
 
@@ -119,7 +121,8 @@ The breathing effect is the same as in the hardware PWM implementation.
 |`backlight_step()`      |Cycle through backlight levels               |
 |`backlight_increase()`  |Increase the backlight level                 |
 |`backlight_decrease()`  |Decrease the backlight level                 |
-|`backlight_level(x)`    |Sets the backlight level to specified level  |
+|`backlight_level(x)`    |Sets the backlight level, from 0 to          |
+|                        |`BACKLIGHT_LEVELS`                           |
 |`get_backlight_level()` |Return the current backlight level           |
 |`is_backlight_enabled()`|Return whether the backlight is currently on |
 

docs/feature_haptic_feedback.md

@@ -29,6 +29,9 @@ Not all keycodes below will work depending on which haptic mechanism you have ch
 |`HPT_BUZ`  | Toggle solenoid buzz on/off                           |
 |`HPT_MODI` | Go to next DRV2605L waveform                          |
 |`HPT_MODD` | Go to previous DRV2605L waveform                      |
+|`HPT_CONT` | Toggle continuous haptic mode on/off                  |
+|`HPT_CONI` | Increase DRV2605L continous haptic strength           |
+|`HPT_COND` | Decrease DRV2605L continous haptic strength           |
 |`HPT_DWLI` | Increase Solenoid dwell time                          |
 |`HPT_DWLD` | Decrease Solenoid dwell time                          |
 
@@ -145,3 +148,7 @@ If haptic feedback is enabled, the keyboard will vibrate to a specific sqeuence
 #define DRV_MODE_DEFAULT *sequence name or number*
 ```
 This will set what sequence HPT_RST will set as the active mode. If not defined, mode will be set to 1 when HPT_RST is pressed.
+
+### DRV2605L Continuous Haptic Mode
+
+This mode sets continuous haptic feedback with the option to increase or decrease strength. 

docs/feature_tap_dance.md

@@ -30,7 +30,9 @@ Next, you will want to define some tap-dance keys, which is easiest to do with t
 After this, you'll want to use the `tap_dance_actions` array to specify what actions shall be taken when a tap-dance key is in action. Currently, there are five possible options:
 
 * `ACTION_TAP_DANCE_DOUBLE(kc1, kc2)`: Sends the `kc1` keycode when tapped once, `kc2` otherwise. When the key is held, the appropriate keycode is registered: `kc1` when pressed and held, `kc2` when tapped once, then pressed and held.
-* `ACTION_TAP_DANCE_DUAL_ROLE(kc, layer)`: Sends the `kc` keycode when tapped once, or moves to `layer`. (this functions like the `TO` layer keycode).
+* `ACTION_TAP_DANCE_LAYER_MOVE(kc, layer)`: Sends the `kc` keycode when tapped once, or moves to `layer`. (this functions like the `TO` layer keycode).
+    * This is the same as `ACTION_TAP_DANCE_DUAL_ROLE`, but renamed to something that is clearer about its functionality.  Both names will work.
+* `ACTION_TAP_DANCE_LAYER_TOGGLE(kc, layer)`: Sends the `kc` keycode when tapped once, or toggles the state of `layer`. (this functions like the `TG` layer keycode).
 * `ACTION_TAP_DANCE_FN(fn)`: Calls the specified function - defined in the user keymap - with the final tap count of the tap dance action.
 * `ACTION_TAP_DANCE_FN_ADVANCED(on_each_tap_fn, on_dance_finished_fn, on_dance_reset_fn)`: Calls the first specified function - defined in the user keymap - on every tap, the second function when the dance action finishes (like the previous option), and the last function when the tap dance action resets.
 * `ACTION_TAP_DANCE_FN_ADVANCED_TIME(on_each_tap_fn, on_dance_finished_fn, on_dance_reset_fn, tap_specific_tapping_term)`: This functions identically to the `ACTION_TAP_DANCE_FN_ADVANCED` function, but uses a custom tapping term for it, instead of the predefined `TAPPING_TERM`.

docs/flashing.md

@@ -10,11 +10,17 @@ Atmel's DFU bootloader comes on all atmega32u4 chips by default, and is used by
 
 To ensure compatibility with the DFU bootloader, make sure this block is present your `rules.mk` (optionally with `lufa-dfu` or `qmk-dfu` instead):
 
-    # Bootloader
+```make
-    #     This definition is optional, and if your keyboard supports multiple bootloaders of
+# Bootloader selection
-    #     different sizes, comment this out, and the correct address will be loaded
+#   Teensy       halfkay
-    #     automatically (+60). See bootloader.mk for all options.
+#   Pro Micro    caterina
-    BOOTLOADER = atmel-dfu
+#   Atmel DFU    atmel-dfu
+#   LUFA DFU     lufa-dfu
+#   QMK DFU      qmk-dfu
+#   ATmega32A    bootloadHID
+#   ATmega328P   USBasp
+BOOTLOADER = atmel-dfu
+```
 
 Compatible flashers:
 
@@ -64,11 +70,17 @@ Arduino boards and their clones use the [Caterina bootloader](https://github.com
 
 To ensure compatibility with the Caterina bootloader, make sure this block is present your `rules.mk`:
 
-    # Bootloader
+```make
-    #     This definition is optional, and if your keyboard supports multiple bootloaders of
+# Bootloader selection
-    #     different sizes, comment this out, and the correct address will be loaded
+#   Teensy       halfkay
-    #     automatically (+60). See bootloader.mk for all options.
+#   Pro Micro    caterina
-    BOOTLOADER = caterina
+#   Atmel DFU    atmel-dfu
+#   LUFA DFU     lufa-dfu
+#   QMK DFU      qmk-dfu
+#   ATmega32A    bootloadHID
+#   ATmega328P   USBasp
+BOOTLOADER = caterina
+```
 
 Compatible flashers:
 
@@ -100,11 +112,17 @@ Halfkay is a super-slim protocol developed by PJRC that uses HID, and come on al
 
 To ensure compatibility with the Halfkay bootloader, make sure this block is present your `rules.mk`:
 
-    # Bootloader
+```make
-    #     This definition is optional, and if your keyboard supports multiple bootloaders of
+# Bootloader selection
-    #     different sizes, comment this out, and the correct address will be loaded
+#   Teensy       halfkay
-    #     automatically (+60). See bootloader.mk for all options.
+#   Pro Micro    caterina
-    BOOTLOADER = halfkay
+#   Atmel DFU    atmel-dfu
+#   LUFA DFU     lufa-dfu
+#   QMK DFU      qmk-dfu
+#   ATmega32A    bootloadHID
+#   ATmega328P   USBasp
+BOOTLOADER = halfkay
+```
 
 Compatible flashers:
 
@@ -125,11 +143,17 @@ USBasploader is a bootloader developed by matrixstorm. It is used in some non-US
 
 To ensure compatibility with the USBasploader bootloader, make sure this block is present in your `rules.mk`:
 
-    # Bootloader
+```make
-    #     This definition is optional, and if your keyboard supports multiple bootloaders of
+# Bootloader selection
-    #     different sizes, comment this out, and the correct address will be loaded
+#   Teensy       halfkay
-    #     automatically (+60). See bootloader.mk for all options.
+#   Pro Micro    caterina
-    BOOTLOADER = USBasp
+#   Atmel DFU    atmel-dfu
+#   LUFA DFU     lufa-dfu
+#   QMK DFU      qmk-dfu
+#   ATmega32A    bootloadHID
+#   ATmega328P   USBasp
+BOOTLOADER = USBasp
+```
 
 Compatible flashers:
 
@@ -150,11 +174,17 @@ BootloadHID is a USB bootloader for AVR microcontrollers. The uploader tool requ
 
 To ensure compatibility with the bootloadHID bootloader, make sure this block is present your `rules.mk`:
 
-    # Bootloader
+```make
-    #     This definition is optional, and if your keyboard supports multiple bootloaders of
+# Bootloader selection
-    #     different sizes, comment this out, and the correct address will be loaded
+#   Teensy       halfkay
-    #     automatically (+60). See bootloader.mk for all options.
+#   Pro Micro    caterina
-    BOOTLOADER = bootloadHID
+#   Atmel DFU    atmel-dfu
+#   LUFA DFU     lufa-dfu
+#   QMK DFU      qmk-dfu
+#   ATmega32A    bootloadHID
+#   ATmega328P   USBasp
+BOOTLOADER = bootloadHID
+```
 
 Compatible flashers:
 

drivers/haptic/DRV2605L.c

@@ -114,6 +114,17 @@ void DRV_init(void) {
     DRV_write(DRV_GO, 0x01);
 }
 
+void DRV_rtp_init(void) {
+  DRV_write(DRV_GO, 0x00);
+  DRV_write(DRV_RTP_INPUT, 20); //20 is the lowest value I've found where haptics can still be felt. 
+  DRV_write(DRV_MODE, 0x05); 
+  DRV_write(DRV_GO, 0x01);
+}
+
+void DRV_amplitude(uint8_t amplitude) {
+  DRV_write(DRV_RTP_INPUT, amplitude);
+}
+
 void DRV_pulse(uint8_t sequence) {
     DRV_write(DRV_GO, 0x00);
     DRV_write(DRV_WAVEFORM_SEQ_1, sequence);

drivers/haptic/DRV2605L.h

@@ -170,6 +170,8 @@
 void    DRV_init(void);
 void    DRV_write(const uint8_t drv_register, const uint8_t settings);
 uint8_t DRV_read(const uint8_t regaddress);
+void    DRV_rtp_init(void);
+void    DRV_amplitude(const uint8_t amplitude);
 void    DRV_pulse(const uint8_t sequence);
 
 typedef enum DRV_EFFECT {

drivers/haptic/haptic.c

@@ -168,6 +168,15 @@ void haptic_set_mode(uint8_t mode) {
     xprintf("haptic_config.mode = %u\n", haptic_config.mode);
 }
 
+void haptic_set_amplitude(uint8_t amp) {
+  haptic_config.amplitude = amp;
+  eeconfig_update_haptic(haptic_config.raw);
+  xprintf("haptic_config.amplitude = %u\n", haptic_config.amplitude);
+  #ifdef DRV2605L
+  DRV_amplitude(amp);
+  #endif
+}
+
 void haptic_set_buzz(uint8_t buzz) {
     haptic_config.buzz = buzz;
     eeconfig_update_haptic(haptic_config.raw);
@@ -201,6 +210,53 @@ uint8_t haptic_get_dwell(void) {
     return haptic_config.dwell;
 }
 
+void haptic_enable_continuous(void) {
+  haptic_config.cont        = 1;
+  xprintf("haptic_config.cont = %u\n", haptic_config.cont);
+  eeconfig_update_haptic(haptic_config.raw);
+  #ifdef DRV2605L
+  DRV_rtp_init();
+  #endif
+}
+
+void haptic_disable_continuous(void) {
+  haptic_config.cont        = 0;
+  xprintf("haptic_config.cont = %u\n", haptic_config.cont);
+  eeconfig_update_haptic(haptic_config.raw);
+  #ifdef DRV2605L
+  DRV_write(DRV_MODE,0x00); 
+  #endif
+}
+
+void haptic_toggle_continuous(void) {
+#ifdef DRV2605L
+if (haptic_config.cont) {
+  haptic_disable_continuous();
+  } else {
+    haptic_enable_continuous();
+  }
+  eeconfig_update_haptic(haptic_config.raw);
+#endif
+}
+
+
+void haptic_cont_increase(void) {
+  uint8_t amp = haptic_config.amplitude + 10;
+  if (haptic_config.amplitude >= 120) {
+    amp = 120;
+  }
+  haptic_set_amplitude(amp);
+}
+
+void haptic_cont_decrease(void) {
+  uint8_t amp = haptic_config.amplitude - 10;
+  if (haptic_config.amplitude < 20) {
+    amp = 20;
+  }
+  haptic_set_amplitude(amp);
+}
+
+
 void haptic_play(void) {
 #ifdef DRV2605L
     uint8_t play_eff = 0;
@@ -213,6 +269,7 @@ void haptic_play(void) {
 }
 
 bool process_haptic(uint16_t keycode, keyrecord_t *record) {
+
     if (keycode == HPT_ON && record->event.pressed) {
         haptic_enable();
     }
@@ -243,6 +300,16 @@ bool process_haptic(uint16_t keycode, keyrecord_t *record) {
     if (keycode == HPT_DWLD && record->event.pressed) {
         haptic_dwell_decrease();
     }
+    if (keycode == HPT_CONT && record->event.pressed) { 
+        haptic_toggle_continuous(); 
+    }
+    if (keycode == HPT_CONI && record->event.pressed) { 
+        haptic_cont_increase(); 
+    }
+    if (keycode == HPT_COND && record->event.pressed) { 
+        haptic_cont_decrease(); 
+    }
+      
     if (haptic_config.enable) {
         if (record->event.pressed) {
             // keypress

drivers/haptic/haptic.h

@@ -34,12 +34,14 @@
 typedef union {
     uint32_t raw;
     struct {
-        bool     enable : 1;
+        bool     enable    :1;
-        uint8_t  feedback : 2;
+        uint8_t  feedback  :2;
-        uint8_t  mode : 7;
+        uint8_t  mode      :7;
-        bool     buzz : 1;
+        bool     buzz      :1;
-        uint8_t  dwell : 7;
+        uint8_t  dwell     :7;
-        uint16_t reserved : 16;
+        bool     cont      :1;
+        uint8_t  amplitude :8;
+        uint16_t reserved  :7; 
     };
 } haptic_config_t;
 
@@ -71,6 +73,9 @@ uint8_t haptic_get_mode(void);
 uint8_t haptic_get_feedback(void);
 void    haptic_dwell_increase(void);
 void    haptic_dwell_decrease(void);
+void    haptic_toggle_continuous(void);
+void    haptic_cont_increase(void);
+void    haptic_cont_decrease(void);
 
 void haptic_play(void);
 void haptic_shutdown(void);

keyboards/1upkeyboards/1up60hte/1up60hte.c

@@ -16,3 +16,19 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */
 
 #include "1up60hte.h"
+
+void keyboard_pre_init_kb(void) {
+	// put your keyboard start-up code here
+	// runs once when the firmware starts up
+    setPinOutput(B6);
+    keyboard_pre_init_user();
+}
+
+void led_set_kb(uint8_t usb_led) {
+	if (IS_LED_ON(usb_led, USB_LED_CAPS_LOCK)) {
+		writePinLow(B6);
+	} else {
+		writePinHigh(B6);
+	}
+    led_set_user(usb_led);
+}

keyboards/1upkeyboards/1up60hte/keymaps/default/keymap.c

@@ -31,22 +31,3 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 		KC_TRNS, RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, KC_END, KC_PGDN,   KC_DOWN, KC_TRNS, KC_TRNS,
 		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS)
 };
-
-void matrix_init_user(void) {
-  setPinOutput(B6);
-}
-
-void matrix_scan_user(void) {
-}
-
-bool process_record_user(uint16_t keycode, keyrecord_t *record) {
-	return true;
-}
-
-void led_set_user(uint8_t usb_led) {
-	if (IS_LED_ON(usb_led, USB_LED_CAPS_LOCK)) {
-		writePinLow(B6);
-	} else {
-		writePinHigh(B6);
-	}
-}

keyboards/1upkeyboards/1up60hte/keymaps/hhkb/keymap.c

@@ -31,22 +31,3 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 		KC_TRNS, RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, KC_END, KC_PGDN,   KC_DOWN, KC_TRNS, KC_TRNS,
 		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS)
 };
-
-void matrix_init_user(void) {
-  setPinOutput(B6);
-}
-
-void matrix_scan_user(void) {
-}
-
-bool process_record_user(uint16_t keycode, keyrecord_t *record) {
-	return true;
-}
-
-void led_set_user(uint8_t usb_led) {
-	if (IS_LED_ON(usb_led, USB_LED_CAPS_LOCK)) {
-		writePinLow(B6);
-	} else {
-		writePinHigh(B6);
-	}
-}

keyboards/1upkeyboards/1up60hte/readme.md

@@ -8,7 +8,6 @@ A 60% PCB with USB C, RGB underglow, backlighting, hotswappable switches, and a
 
 Keyboard Maintainer: [Bubnick](https://github.com/bubnick)  
 Hardware Supported: 1up60hte 60% PCB  
-
 Hardware Availability: [1upkeyboards.com](https://www.1upkeyboards.com/shop/controllers/1up-rgb-60-pcb-hte/)
 
 Make example for this keyboard (after setting up your build environment):

keyboards/1upkeyboards/1up60hte/rules.mk

@@ -1,50 +1,12 @@
 # MCU name
 MCU = atmega32u4
 
-# Processor frequency.
+BOOTLOADER = atmel-dfu
-#     This will define a symbol, F_CPU, in all source code files equal to the
-#     processor frequency in Hz. You can then use this symbol in your source code to
-#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
-#     automatically to create a 32-bit value in your source code.
-#
-#     This will be an integer division of F_USB below, as it is sourced by
-#     F_USB after it has run through any CPU prescalers. Note that this value
-#     does not *change* the processor frequency - it should merely be updated to
-#     reflect the processor speed set externally so that the code can use accurate
-#     software delays.
-F_CPU = 16000000
-
-#
-# LUFA specific
-#
-# Target architecture (see library "Board Types" documentation).
-ARCH = AVR8
-
-# Input clock frequency.
-#     This will define a symbol, F_USB, in all source code files equal to the
-#     input clock frequency (before any prescaling is performed) in Hz. This value may
-#     differ from F_CPU if prescaling is used on the latter, and is required as the
-#     raw input clock is fed directly to the PLL sections of the AVR for high speed
-#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
-#     at the end, this will be done automatically to create a 32-bit value in your
-#     source code.
-#
-#     If no clock division is performed on the input clock inside the AVR (via the
-#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
-F_USB = $(F_CPU)
-
-# Interrupt driven control endpoint task(+60)
-OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
-
-
-# Boot Section Size in *bytes*
-OPT_DEFS += -DBOOTLOADER_SIZE=4096
-
 
 # Build Options
 #   comment out to disable the options.
 #
-BOOTMAGIC_ENABLE = yes	# Virtual DIP switch configuration(+1000)
+BOOTMAGIC_ENABLE = lite	# Virtual DIP switch configuration(+1000)
 MOUSEKEY_ENABLE = yes	# Mouse keys(+4700)
 EXTRAKEY_ENABLE = yes	# Audio control and System control(+450)
 CONSOLE_ENABLE = no	# Console for debug(+400)
@@ -54,6 +16,5 @@ NKRO_ENABLE = yes		# USB Nkey Rollover - if this doesn't work, see here: https:/
 BACKLIGHT_ENABLE = yes  # Enable keyboard backlight functionality
 AUDIO_ENABLE = no
 RGBLIGHT_ENABLE = yes
-EXTRAFLAGS += -flto
 
 LAYOUTS = 60_hhkb

keyboards/2key2crawl/2key2crawl.c

@@ -0,0 +1 @@
+#include "2key2crawl.h"

keyboards/2key2crawl/2key2crawl.h

@@ -0,0 +1,12 @@
+#pragma once
+
+#include "quantum.h"
+
+#define LAYOUT( \
+	K00, K01, K02, K03, K15, \
+	K10, K11, K12, K13, K14, K16  \
+) { \
+	{ K00,   K01,   K02,   K03,  KC_NO, KC_NO, KC_NO }, \
+	{ K10,   K11,   K12,   K13,  K14,   K15,   K16 },  \
+}
+

keyboards/2key2crawl/config.h

@@ -0,0 +1,44 @@
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0xFEED
+#define PRODUCT_ID      0x6090
+#define DEVICE_VER      0x0002
+#define MANUFACTURER    WoodKeys.click
+#define PRODUCT         2Key2Crawl
+#define DESCRIPTION     ATX Keycrawl 2018
+
+/* key matrix size */
+#define MATRIX_ROWS 2
+#define MATRIX_COLS 7
+
+/* key matrix pins */
+#define MATRIX_ROW_PINS { C4, C5 }
+#define MATRIX_COL_PINS { B3, B4, B5, B6, B7, C7, B2 }
+#define UNUSED_PINS
+
+
+#define ENCODERS_PAD_A { D0 }
+#define ENCODERS_PAD_B { D1 }
+#define ENCODER_RESOLUTION 1
+
+/* COL2ROW or ROW2COL */
+#define DIODE_DIRECTION COL2ROW
+
+/* Set 0 if debouncing isn't needed */
+#define DEBOUNCE 5
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+
+#ifdef RGBLIGHT_ENABLE
+#define RGB_DI_PIN C6
+#define RGBLIGHT_ANIMATIONS
+#define RGBLED_NUM 3
+#endif

keyboards/2key2crawl/keymaps/default/keymap.c

@@ -0,0 +1,28 @@
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+LAYOUT(
+    KC_1, KC_2, KC_3, KC_4, KC_5,
+    KC_6, KC_7, KC_8, KC_9, KC_0, KC_ENTER),
+
+};
+
+void matrix_init_user(void) {
+  debug_config.matrix = 1;
+  debug_config.keyboard = 1;
+  debug_config.enable = 1;
+}
+
+
+
+void encoder_update_user(int8_t index, bool clockwise) {
+  if (index == 0) {
+    if (clockwise) {
+      tap_code(KC_PGUP);
+    } else {
+      tap_code(KC_PGDN);
+    }
+  }
+}
+

keyboards/2key2crawl/keymaps/tabs/keymap.c

@@ -0,0 +1,26 @@
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+LAYOUT(
+    KC_1, KC_2, KC_3, KC_4, KC_5,
+    KC_6, KC_7, KC_8, KC_9, KC_0, KC_ENTER),
+
+};
+
+void matrix_init_user(void) {
+  debug_config.matrix = 1;
+  debug_config.keyboard = 1;
+  debug_config.enable = 1;
+}
+
+void encoder_update_user(int8_t index, bool clockwise) {
+  if (index == 0) {
+    if (clockwise) {
+      tap_code16(C(KC_T));
+    } else {
+      tap_code16(C(KC_W));
+    }
+  }
+}
+

keyboards/2key2crawl/keymaps/vol/keymap.c

@@ -0,0 +1,25 @@
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+LAYOUT(
+    KC_1, KC_2, KC_3, KC_4, KC_5,
+    KC_6, KC_7, KC_8, KC_9, KC_0, KC_ENTER),
+
+};
+
+void matrix_init_user(void) {
+  debug_config.matrix = 1;
+  debug_config.keyboard = 1;
+  debug_config.enable = 1;
+}
+
+void encoder_update_user(int8_t index, bool clockwise) {
+  if (index == 0) {
+    if (clockwise) {
+     tap_code(KC_VOLU);
+    } else {
+      tap_code(KC_VOLD);
+    }
+  }
+}

keyboards/2key2crawl/readme.md

@@ -0,0 +1,16 @@
+# 2Key2CrawlPad
+
+![2Key2CrawlPad](https://i.imgur.com/ON7m7RI.jpg)
+
+A 2x5 macropad/numpad with a rotary encoder, exclusively available at Austin Keycrawl 2018 (12-01-2018).
+
+Keyboard Maintainer: QMK Community  
+Keyboard Designer: [Cole Markham](https://github.com/colemarkham)  
+Hardware Supported: Crawlpad  
+Hardware Availability: Exclusive to Keycrawl events, contact [awwwwwwyeaahhhhhh](https://www.reddit.com/user/awwwwwwyeaahhhhhh) for more details.
+
+Make example for this keyboard (after setting up your build environment):
+
+    make 2key2crawl:default
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

keyboards/2key2crawl/rules.mk

@@ -0,0 +1,27 @@
+# MCU name
+MCU = atmega32u2
+
+# Bootloader selection
+#   Teensy       halfkay
+#   Pro Micro    caterina
+#   Atmel DFU    atmel-dfu
+#   LUFA DFU     lufa-dfu
+#   QMK DFU      qmk-dfu
+#   ATmega32A    bootloadHID
+#   ATmega328P   USBasp
+BOOTLOADER = atmel-dfu
+
+# Build Options
+#   comment out to disable the options.
+#
+BOOTMAGIC_ENABLE = lite	# Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = no	# Mouse keys(+4700)
+EXTRAKEY_ENABLE = no	# Audio control and System control(+450)
+CONSOLE_ENABLE = yes	# Console for debug(+400)
+COMMAND_ENABLE = no    # Commands for debug and configuration
+SLEEP_LED_ENABLE = no  # Breathing sleep LED during USB suspend
+NKRO_ENABLE = no		# USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+BACKLIGHT_ENABLE = no  # [Crawlpad] Custom backlighting code is used, so this should not be enabled
+AUDIO_ENABLE = no # [Crawlpad] This can be enabled if a speaker is connected to the expansion port. Not compatible with RGBLIGHT below
+RGBLIGHT_ENABLE = no # [Crawlpad] This can be enabled if a ws2812 strip is connected to the expansion port.
+ENCODER_ENABLE = yes # [2Key2crawl] Make the knobs turn

keyboards/40percentclub/mf68/keymaps/emdarcher/config.h

@@ -0,0 +1,3 @@
+#pragma once
+
+#define GRAVE_ESC_ALT_OVERRIDE

keyboards/40percentclub/mf68/keymaps/emdarcher/keymap.c

@@ -0,0 +1,55 @@
+#include QMK_KEYBOARD_H
+
+#define _QWERTY 0
+#define _FN1 1
+#define _FN2 2
+#define X0 LT(_FN2, KC_CAPS)
+#define X1 MO(_FN1)
+
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+ /* Default layer */
+  [_QWERTY] = LAYOUT_68_ansi(
+    KC_GESC, KC_1  , KC_2  , KC_3  , KC_4  , KC_5  , KC_6  , KC_7  , KC_8  , KC_9  , KC_0  ,KC_MINS, KC_EQL, KC_BSPC,      KC_INS ,KC_PGUP,
+    KC_TAB , KC_Q  , KC_W  , KC_E  , KC_R  , KC_T  , KC_Y  , KC_U  , KC_I  , KC_O  , KC_P  ,KC_LBRC,KC_RBRC, KC_BSLS,      KC_DEL ,KC_PGDN,
+    X0     , KC_A  , KC_S  , KC_D  , KC_F  , KC_G  , KC_H  , KC_J  , KC_K  , KC_L  ,KC_SCLN,KC_QUOT,    KC_ENTER,
+    KC_LSFT     , KC_Z  , KC_X  , KC_C  , KC_V  , KC_B  , KC_N  , KC_M  ,KC_COMM,KC_DOT ,KC_SLSH,       KC_RSFT,            KC_UP ,
+    KC_LCTL ,KC_LALT ,KC_LGUI ,            KC_SPACE                     ,  X1   ,KC_RALT ,KC_RCTL ,                KC_LEFT,KC_DOWN,KC_RGHT
+  ),
+ /* FN Layer */
+  [_FN1] = LAYOUT_68_ansi(
+    KC_GRV , KC_F1 , KC_F2 , KC_F3 , KC_F4 , KC_F5 , KC_F6 , KC_F7 , KC_F8 , KC_F9 ,KC_F10 ,KC_F11 ,KC_F12 ,  KC_BSPC,     _______,KC_HOME,
+    _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,KC_PSCR,KC_SLCK,KC_PAUS,_______,       _______,KC_END,
+     X0    ,_______,_______,_______,_______,_______,_______,_______,_______,_______,KC_MRWD,KC_MFFD,    _______,
+   _______      ,_______,KC_MPLY,KC_MSTP,KC_MPRV,KC_MNXT,KC_VOLD,KC_VOLU,KC_MUTE,_______,_______,       _______,           _______,
+   _______ ,_______ ,_______ ,             _______,                      _______,_______,_______,                  _______,_______,_______
+  ),
+
+ /* CAPS LOCK layer */
+  [_FN2] = LAYOUT_68_ansi(
+    KC_GRV , KC_F1 , KC_F2 , KC_F3 , KC_F4 , KC_F5 , KC_F6 , KC_F7 , KC_F8 , KC_F9 ,KC_F10 ,KC_F11 ,KC_F12 , KC_BSPC,      KC_VOLU,KC_HOME,
+    _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______, _______,      KC_VOLD,KC_END,
+    _______,_______,_______,_______,_______,_______,KC_LEFT,KC_DOWN, KC_UP ,KC_RGHT,_______,_______,    _______,
+    _______     ,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,       _______,           KC_MUTE,
+    _______ ,_______ ,_______ ,            _______,                      _______,_______,_______,                  KC_MPRV,KC_MPLY,KC_MNXT
+  )
+};
+
+
+
+void led_set_user(uint8_t usb_led){
+    //turn on the Pro Micro's on board LEDs for CAPS LOCK
+    if(IS_LED_ON(usb_led, USB_LED_CAPS_LOCK)){
+        //set led pins to low
+        setPinOutput(B0);
+        writePinLow(B0);
+        setPinOutput(B5);
+        writePinLow(B5);
+    } else {
+        //set to Hi-Z
+        setPinInput(B0);
+        writePinLow(B0);
+        setPinInput(B5);  
+        writePinLow(B5);
+    }
+}

keyboards/40percentclub/mf68/keymaps/emdarcher/readme.md

@@ -0,0 +1,13 @@
+# emdarcher's MF68 Layout
+
+A layout mostly based off the factory layout, but with some modifications. Designed for use in a MAC or Unix environment, and has some VIM inspiration.
+
+- Utilizes the Pro Micro's on board LED's to show the CAPS LOCK status.
+- Added Caps Lock for an extra FN layer with VIM like control on hjlk keys.
+- Made the ESC key use GESC for functionality for Grave and Tilde with shift or GUI modifiers.
+- Added Print Screen, Scroll Lock, and Pause keys on P,[,] keys to add Mac screen brightness control.
+    * On Mac, Scroll Lock is Brightness Down and Pause is Brightness Up, so with this FN+[ = brighness down, FN+] = brightness up
+- Has Mac Fast-forward and Rewind keys mapped for changing media tracks. FN+; = Rewind, FN+' = Fast-forward
+- Moved LGUI to the default MAC Command key position.
+
+Note: By default, this keymap doesn't utilize the backlighting.

keyboards/40percentclub/mf68/keymaps/emdarcher/rules.mk

@@ -0,0 +1,3 @@
+
+BACKLIGHT_ENABLE = no
+

keyboards/9key/keymaps/bcat/keymap.c

@@ -0,0 +1,26 @@
+#include QMK_KEYBOARD_H
+
+enum layer {
+    LAYER_DEFAULT,
+    LAYER_FUNCTION,
+};
+
+/* Switch to function layer when held. */
+#define LY_FUNC MO(LAYER_FUNCTION)
+
+/* Send Ctrl+Alt+L (Cinnamon screen lock shortcut) when pressed. */
+#define KY_LOCK LCA(KC_L)
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+    [LAYER_DEFAULT] = LAYOUT(
+        KC_MPLY,  KC_VOLU,  KC_MSTP,
+        KC_MPRV,  KC_VOLD,  KC_MNXT,
+        KY_LOCK,  KC_MUTE,  LY_FUNC
+    ),
+
+    [LAYER_FUNCTION] = LAYOUT(
+        EEP_RST,  _______,  RESET,
+        _______,  _______,  _______,
+        _______,  _______,  _______
+    ),
+};

keyboards/9key/keymaps/bcat/readme.md

@@ -0,0 +1,5 @@
+# bcat's 9-Key layout
+
+This is a super simple PCB-mount macropad with nine keys, used at work for
+media keys and quick access to screen lock on Linux (Cinnamon desktop
+environment).

keyboards/9key/keymaps/bcat/rules.mk

@@ -0,0 +1 @@
+BOOTLOADER = caterina  # Pro Micro

keyboards/aeboards/aegis/config.h

@@ -55,16 +55,16 @@
 
 // TODO: refactor with new user EEPROM code (coming soon)
 #define EEPROM_MAGIC 0x451F
-#define EEPROM_MAGIC_ADDR 32
+#define EEPROM_MAGIC_ADDR 34
 // Bump this every time we change what we store
 // This will automatically reset the EEPROM with defaults
 // and avoid loading invalid data from the EEPROM
 #define EEPROM_VERSION 0x08
-#define EEPROM_VERSION_ADDR 34
+#define EEPROM_VERSION_ADDR 36
 
 // Dynamic keymap starts after EEPROM version
-#define DYNAMIC_KEYMAP_EEPROM_ADDR 35
+#define DYNAMIC_KEYMAP_EEPROM_ADDR 37
-// Dynamic macro starts after dynamic keymaps (35+(4*12*9*2)) = (35+864)
+// Dynamic macro starts after dynamic keymaps (37+(4*12*9*2)) = (37+864)
-#define DYNAMIC_KEYMAP_MACRO_EEPROM_ADDR 899
+#define DYNAMIC_KEYMAP_MACRO_EEPROM_ADDR 901
-#define DYNAMIC_KEYMAP_MACRO_EEPROM_SIZE 125
+#define DYNAMIC_KEYMAP_MACRO_EEPROM_SIZE 123
 #define DYNAMIC_KEYMAP_MACRO_COUNT 16

keyboards/aeboards/ext65/config.h

@@ -55,17 +55,17 @@
 
 // TODO: refactor with new user EEPROM code (coming soon)
 #define EEPROM_MAGIC 0x451F
-#define EEPROM_MAGIC_ADDR 32
+#define EEPROM_MAGIC_ADDR 34
 // Bump this every time we change what we store
 // This will automatically reset the EEPROM with defaults
 // and avoid loading invalid data from the EEPROM
 #define EEPROM_VERSION 0x08
-#define EEPROM_VERSION_ADDR 34
+#define EEPROM_VERSION_ADDR 36
 
 // Dynamic keymap starts after EEPROM version
-#define DYNAMIC_KEYMAP_EEPROM_ADDR 35
+#define DYNAMIC_KEYMAP_EEPROM_ADDR 37
-// Dynamic macro starts after dynamic keymaps (35+(4*10*10*2)) = (35+800)
+// Dynamic macro starts after dynamic keymaps (37+(4*10*10*2)) = (37+800)
-#define DYNAMIC_KEYMAP_MACRO_EEPROM_ADDR 835
+#define DYNAMIC_KEYMAP_MACRO_EEPROM_ADDR 837
-#define DYNAMIC_KEYMAP_MACRO_EEPROM_SIZE 189
+#define DYNAMIC_KEYMAP_MACRO_EEPROM_SIZE 187
 #define DYNAMIC_KEYMAP_MACRO_COUNT 16
 

keyboards/ai03/lunar/config.h

@@ -250,17 +250,17 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 // EEPROM usage
 
 #define EEPROM_MAGIC 0x451F
-#define EEPROM_MAGIC_ADDR 32
+#define EEPROM_MAGIC_ADDR 34
 // Bump this every time we change what we store
 // This will automatically reset the EEPROM with defaults
 // and avoid loading invalid data from the EEPROM
 #define EEPROM_VERSION 0x08
-#define EEPROM_VERSION_ADDR 34
+#define EEPROM_VERSION_ADDR 36
 
 // Dynamic keymap starts after EEPROM version
-#define DYNAMIC_KEYMAP_EEPROM_ADDR 35
+#define DYNAMIC_KEYMAP_EEPROM_ADDR 37
 // DYNAMIC_KEYMAP_MACRO_EEPROM_ADDR = DYNAMIC_KEYMAP_EEPROM_ADDR + (DYNAMIC_KEYMAP_LAYER_COUNT * MATRIX_ROWS * MATRIX_COLS * 2)
-#define DYNAMIC_KEYMAP_MACRO_EEPROM_ADDR 635
+#define DYNAMIC_KEYMAP_MACRO_EEPROM_ADDR 637
 // DYNAMIC_KEYMAP_MACRO_EEPROM_SIZE = 1024 - DYNAMIC_KEYMAP_MACRO_EEPROM_ADDR
-#define DYNAMIC_KEYMAP_MACRO_EEPROM_SIZE 389
+#define DYNAMIC_KEYMAP_MACRO_EEPROM_SIZE 387
 #define DYNAMIC_KEYMAP_MACRO_COUNT 16

keyboards/alps64/alps64.c

@@ -14,17 +14,24 @@ GNU General Public License for more details.
 You should have received a copy of the GNU General Public License
 along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */
-#include "quantum.h"
+#include "alps64.h"
 
-#define LED_ON()    do { DDRC |= (1<<5); PORTC |= (1<<5); } while (0)
+void keyboard_pre_init_kb(void) {
-#define LED_OFF()   do { DDRC &= ~(1<<5); PORTC &= ~(1<<5); } while (0)
+	// put your keyboard start-up code here
-#define LED_TGL()   do { DDRC |= (1<<5); PINC |= (1<<5); } while (0)
+	// runs once when the firmware starts up
-
+    setPinOutput(C5);
-
+    keyboard_pre_init_user();
-void matrix_init_kb(void) {
+}
-    LED_ON();
+
-    _delay_ms(500);
+void led_set_kb(uint8_t usb_led)
-    LED_OFF();
+{
-    
+    if (IS_LED_ON(usb_led, USB_LED_CAPS_LOCK)) {
-    matrix_init_user();
+        // output high
+        writePinHigh(C5);
+    } else {
+        // Hi-Z
+        writePinLow(C5);
+    }
+
+    led_set_user(usb_led);
 }

keyboards/alps64/alps64.h

@@ -14,8 +14,7 @@ GNU General Public License for more details.
 You should have received a copy of the GNU General Public License
 along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */
-#ifndef ALPS64_H
+#pragma once
-#define ALPS64_H
 
 #include "quantum.h"
 
@@ -105,22 +104,3 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
     { K60,   K61,   K62,   K63, K64, K65, K66,   K67 }, \
     { KC_NO, K71,   K72,   K73, K74, K75, K76,   K77 } \
 }
-
-#define LAYOUT_kc( \
-    K36, K37, K46, K47, K56, K57, K66, K67, K76, K77, K06, K07, K17, K26, K27, \
-    K34, K35, K44, K45, K54, K55, K64, K65, K75, K05, K15, K16, K25, K24, \
-    K32, K33, K43, K52, K53, K63, K73, K74, K03, K04, K13, K14, K23, \
-    K31, K41, K42, K51, K61, K62, K71, K72, K01, K02, K11, K12, K21, K22, \
-    K30, K40, K50,           K60,                     K70, K00, K10, K20  \
-) { \
-    { KC_##K00, KC_##K01, KC_##K02, KC_##K03, KC_##K04, KC_##K05, KC_##K06, KC_##K07 }, \
-    { KC_##K10, KC_##K11, KC_##K12, KC_##K13, KC_##K14, KC_##K15, KC_##K16, KC_##K17 }, \
-    { KC_##K20, KC_##K21, KC_##K22, KC_##K23, KC_##K24, KC_##K25, KC_##K26, KC_##K27 }, \
-    { KC_##K30, KC_##K31, KC_##K32, KC_##K33, KC_##K34, KC_##K35, KC_##K36, KC_##K37 }, \
-    { KC_##K40, KC_##K41, KC_##K42, KC_##K43, KC_##K44, KC_##K45, KC_##K46, KC_##K47 }, \
-    { KC_##K50, KC_##K51, KC_##K52, KC_##K53, KC_##K54, KC_##K55, KC_##K56, KC_##K57 }, \
-    { KC_##K60, KC_##K61, KC_##K62, KC_##K63, KC_##K64, KC_##K65, KC_##K66, KC_##K67 }, \
-    { KC_##K70, KC_##K71, KC_##K72, KC_##K73, KC_##K74, KC_##K75, KC_##K76, KC_##K77 } \
-}
-
-#endif

keyboards/alps64/config.h

@@ -15,8 +15,7 @@ You should have received a copy of the GNU General Public License
 along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */
 
-#ifndef CONFIG_H
+#pragma once
-#define CONFIG_H
 
 #include "config_common.h"
 
@@ -24,7 +23,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define VENDOR_ID       0xFEED
 #define PRODUCT_ID      0x6464
 #define DEVICE_VER      0x0001
-#define MANUFACTURER    TMK
+#define MANUFACTURER    Hasu
 #define PRODUCT         Alps64
 #define DESCRIPTION     TMK keyboard firmware for Alps64
 
@@ -64,5 +63,3 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 //#define NO_ACTION_ONESHOT
 //#define NO_ACTION_MACRO
 //#define NO_ACTION_FUNCTION
-
-#endif

keyboards/alps64/matrix.c

@@ -1,199 +0,0 @@
-/*
-Copyright 2012 Jun Wako <wakojun@gmail.com>
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program.  If not, see <http://www.gnu.org/licenses/>.
-*/
-
-/*
- * scan matrix
- */
-#include <stdint.h>
-#include <stdbool.h>
-#include <avr/io.h>
-#include <util/delay.h>
-#include "print.h"
-#include "debug.h"
-#include "util.h"
-#include "matrix.h"
-
-
-#ifndef DEBOUNCE
-#   define DEBOUNCE	5
-#endif
-static uint8_t debouncing = DEBOUNCE;
-
-/* matrix state(1:on, 0:off) */
-static matrix_row_t matrix[MATRIX_ROWS];
-static matrix_row_t matrix_debouncing[MATRIX_ROWS];
-
-static matrix_row_t read_cols(void);
-static void init_cols(void);
-static void unselect_rows(void);
-static void select_row(uint8_t row);
-
-
-inline
-uint8_t matrix_rows(void)
-{
-    return MATRIX_ROWS;
-}
-
-inline
-uint8_t matrix_cols(void)
-{
-    return MATRIX_COLS;
-}
-
-void matrix_init(void)
-{
-    // initialize row and col
-    unselect_rows();
-    init_cols();
-
-    // initialize matrix state: all keys off
-    for (uint8_t i=0; i < MATRIX_ROWS; i++) {
-        matrix[i] = 0;
-        matrix_debouncing[i] = 0;
-    }
-
-    //debug
-    debug_matrix = true;
-    LED_ON();
-    _delay_ms(500);
-    LED_OFF();
-}
-
-uint8_t matrix_scan(void)
-{
-    for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
-        select_row(i);
-        _delay_us(30);  // without this wait read unstable value.
-        matrix_row_t cols = read_cols();
-        if (matrix_debouncing[i] != cols) {
-            matrix_debouncing[i] = cols;
-            if (debouncing) {
-                debug("bounce!: "); debug_hex(debouncing); debug("\n");
-            }
-            debouncing = DEBOUNCE;
-        }
-        unselect_rows();
-    }
-
-    if (debouncing) {
-        if (--debouncing) {
-            _delay_ms(1);
-        } else {
-            for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
-                matrix[i] = matrix_debouncing[i];
-            }
-        }
-    }
-
-    matrix_scan_quantum();
-
-    return 1;
-}
-
-inline
-bool matrix_is_on(uint8_t row, uint8_t col)
-{
-    return (matrix[row] & ((matrix_row_t)1<<col));
-}
-
-inline
-matrix_row_t matrix_get_row(uint8_t row)
-{
-    return matrix[row];
-}
-
-void matrix_print(void)
-{
-    print("\nr/c 0123456789ABCDEF\n");
-    for (uint8_t row = 0; row < MATRIX_ROWS; row++) {
-        phex(row); print(": ");
-        pbin_reverse16(matrix_get_row(row));
-        print("\n");
-    }
-}
-
-/* Column pin configuration
- * col: 0   1   2   3   4   5   6   7
- * pin: B0  B1  B2  B3  B4  B5  B6  B7
- */
-static void  init_cols(void)
-{
-    // Input with pull-up(DDR:0, PORT:1)
-    DDRB  &= ~0b11111111;
-    PORTB |=  0b11111111;
-}
-
-/* Returns status of switches(1:on, 0:off) */
-static matrix_row_t read_cols(void)
-{
-    // Invert because PIN indicates 'switch on' with low(0) and 'off' with high(1)
-    return ~PINB;
-}
-
-/* Row pin configuration
- * row: 0   1   2   3   4   5   6   7
- * pin: D0  D1  D2  D3  D4  D5  D6  C2
- */
-static void unselect_rows(void)
-{
-    // Hi-Z(DDR:0, PORT:0) to unselect
-    DDRD  &= ~0b01111111;
-    PORTD &= ~0b01111111;
-    DDRC  &= ~0b00000100;
-    PORTC &= ~0b00000100;
-}
-
-
-static void select_row(uint8_t row)
-{
-    // Output low(DDR:1, PORT:0) to select
-    switch (row) {
-        case 0:
-            DDRD  |= (1<<0);
-            PORTD &= ~(1<<0);
-            break;
-        case 1:
-            DDRD  |= (1<<1);
-            PORTD &= ~(1<<1);
-            break;
-        case 2:
-            DDRD  |= (1<<2);
-            PORTD &= ~(1<<2);
-            break;
-        case 3:
-            DDRD  |= (1<<3);
-            PORTD &= ~(1<<3);
-            break;
-        case 4:
-            DDRD  |= (1<<4);
-            PORTD &= ~(1<<4);
-            break;
-        case 5:
-            DDRD  |= (1<<5);
-            PORTD &= ~(1<<5);
-            break;
-        case 6:
-            DDRD  |= (1<<6);
-            PORTD &= ~(1<<6);
-            break;
-        case 7:
-            DDRC  |= (1<<2);
-            PORTC &= ~(1<<2);
-            break;
-    }
-}

keyboards/alps64/rules.mk

@@ -1,63 +1,20 @@
-
-
-# Target file name (without extension).
-
-# project specific files
-SRC = led.c
-
 # MCU name
 MCU = atmega32u2
 
-# Processor frequency.
+# Bootloader selection
-#     This will define a symbol, F_CPU, in all source code files equal to the
+#   Teensy       halfkay
-#     processor frequency in Hz. You can then use this symbol in your source code to
+#   Pro Micro    caterina
-#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+#   Atmel DFU    atmel-dfu
-#     automatically to create a 32-bit value in your source code.
+#   LUFA DFU     lufa-dfu
-#
+#   QMK DFU      qmk-dfu
-#     This will be an integer division of F_USB below, as it is sourced by
+#   ATmega32A    bootloadHID
-#     F_USB after it has run through any CPU prescalers. Note that this value
+#   ATmega328P   USBasp
-#     does not *change* the processor frequency - it should merely be updated to
+BOOTLOADER = atmel-dfu
-#     reflect the processor speed set externally so that the code can use accurate
-#     software delays.
-F_CPU = 16000000
-
-
-#
-# LUFA specific
-#
-# Target architecture (see library "Board Types" documentation).
-ARCH = AVR8
-
-# Input clock frequency.
-#     This will define a symbol, F_USB, in all source code files equal to the
-#     input clock frequency (before any prescaling is performed) in Hz. This value may
-#     differ from F_CPU if prescaling is used on the latter, and is required as the
-#     raw input clock is fed directly to the PLL sections of the AVR for high speed
-#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
-#     at the end, this will be done automatically to create a 32-bit value in your
-#     source code.
-#
-#     If no clock division is performed on the input clock inside the AVR (via the
-#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
-F_USB = $(F_CPU)
-
-# Interrupt driven control endpoint task(+60)
-OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
-
-
-# Boot Section Size in *bytes*
-#   Teensy halfKay   512
-#   Teensy++ halfKay 1024
-#   Atmel DFU loader 4096
-#   LUFA bootloader  4096
-#   USBaspLoader     2048
-OPT_DEFS += -DBOOTLOADER_SIZE=4096
-
 
 # Build Options
 #   change to no to disable the options.
 #
-BOOTMAGIC_ENABLE = yes	# Virtual DIP switch configuration(+1000)
+BOOTMAGIC_ENABLE = lite	# Virtual DIP switch configuration(+1000)
 MOUSEKEY_ENABLE = yes	# Mouse keys(+4700)
 EXTRAKEY_ENABLE = yes	# Audio control and System control(+450)
 CONSOLE_ENABLE = yes	# Console for debug(+400)

keyboards/ares/rules.mk

@@ -15,18 +15,15 @@
 
 # MCU name
 MCU = atmega32a
-PROTOCOL = VUSB
 
-# unsupported features for now
+# Bootloader selection
-NO_SUSPEND_POWER_DOWN = yes
+#   Teensy       halfkay
-
+#   Pro Micro    caterina
-# processor frequency
+#   Atmel DFU    atmel-dfu
-F_CPU = 12000000
+#   LUFA DFU     lufa-dfu
-
+#   QMK DFU      qmk-dfu
-# Bootloader
+#   ATmega32A    bootloadHID
-#     This definition is optional, and if your keyboard supports multiple bootloaders of
+#   ATmega328P   USBasp
-#     different sizes, comment this out, and the correct address will be loaded 
-#     automatically (+60). See bootloader.mk for all options.
 BOOTLOADER = bootloadHID
 
 # build options
@@ -38,11 +35,7 @@ COMMAND_ENABLE = yes
 BACKLIGHT_ENABLE = no
 RGBLIGHT_ENABLE = no
 RGBLIGHT_CUSTOM_DRIVER = yes
-NO_UART = yes
 
 OPT_DEFS = -DDEBUG_LEVEL=0
 
 SRC += i2c_master.c
-
-# programming options
-PROGRAM_CMD = ./util/atmega32a_program.py $(TARGET).hex

keyboards/at_at/660m/660m.c

@@ -0,0 +1 @@
+#include "660m.h"

keyboards/at_at/660m/660m.h

@@ -0,0 +1,19 @@
+#pragma once
+
+#include "quantum.h"
+
+#define KNO KC_NO
+
+#define LAYOUT( \
+    k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C, k0D,      k0F, \
+    k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1A, k1B, k1C, k1D,      k1F, \
+    k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2A, k2B,      k2D, \
+    k30,      k32, k33, k34, k35, k36, k37, k38, k39, k3A, k3B, k3C,      k3E, \
+    k40, k41, k42,                k46,                k4A, k4B, k4C, k4D, k4E, k4F \
+) { \
+    { k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C, k0D, KNO, k0F }, \
+    { k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1A, k1B, k1C, k1D, KNO, k1F }, \
+    { k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2A, k2B, KNO, k2D, KNO, KNO }, \
+    { k30, KNO, k32, k33, k34, k35, k36, k37, k38, k39, k3A, k3B, k3C, KNO, k3E, KNO }, \
+    { k40, k41, k42, KNO, KNO, KNO, k46, KNO, KNO, KNO, k4A, k4B, k4C, k4D, k4E, k4F }  \
+}

keyboards/at_at/660m/boards/ST_STM32F072B_DISCOVERY/board.c

@@ -0,0 +1,109 @@
+/*
+    ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+/*
+ * This file has been automatically generated using ChibiStudio board
+ * generator plugin. Do not edit manually.
+ */
+
+#include "hal.h"
+
+#if HAL_USE_PAL || defined(__DOXYGEN__)
+/**
+ * @brief   PAL setup.
+ * @details Digital I/O ports static configuration as defined in @p board.h.
+ *          This variable is used by the HAL when initializing the PAL driver.
+ */
+const PALConfig pal_default_config = {
+#if STM32_HAS_GPIOA
+  {VAL_GPIOA_MODER, VAL_GPIOA_OTYPER, VAL_GPIOA_OSPEEDR, VAL_GPIOA_PUPDR,
+   VAL_GPIOA_ODR,   VAL_GPIOA_AFRL,   VAL_GPIOA_AFRH},
+#endif
+#if STM32_HAS_GPIOB
+  {VAL_GPIOB_MODER, VAL_GPIOB_OTYPER, VAL_GPIOB_OSPEEDR, VAL_GPIOB_PUPDR,
+   VAL_GPIOB_ODR,   VAL_GPIOB_AFRL,   VAL_GPIOB_AFRH},
+#endif
+#if STM32_HAS_GPIOC
+  {VAL_GPIOC_MODER, VAL_GPIOC_OTYPER, VAL_GPIOC_OSPEEDR, VAL_GPIOC_PUPDR,
+   VAL_GPIOC_ODR,   VAL_GPIOC_AFRL,   VAL_GPIOC_AFRH},
+#endif
+#if STM32_HAS_GPIOD
+  {VAL_GPIOD_MODER, VAL_GPIOD_OTYPER, VAL_GPIOD_OSPEEDR, VAL_GPIOD_PUPDR,
+   VAL_GPIOD_ODR,   VAL_GPIOD_AFRL,   VAL_GPIOD_AFRH},
+#endif
+#if STM32_HAS_GPIOE
+  {VAL_GPIOE_MODER, VAL_GPIOE_OTYPER, VAL_GPIOE_OSPEEDR, VAL_GPIOE_PUPDR,
+   VAL_GPIOE_ODR,   VAL_GPIOE_AFRL,   VAL_GPIOE_AFRH},
+#endif
+#if STM32_HAS_GPIOF
+  {VAL_GPIOF_MODER, VAL_GPIOF_OTYPER, VAL_GPIOF_OSPEEDR, VAL_GPIOF_PUPDR,
+   VAL_GPIOF_ODR,   VAL_GPIOF_AFRL,   VAL_GPIOF_AFRH},
+#endif
+#if STM32_HAS_GPIOG
+  {VAL_GPIOG_MODER, VAL_GPIOG_OTYPER, VAL_GPIOG_OSPEEDR, VAL_GPIOG_PUPDR,
+   VAL_GPIOG_ODR,   VAL_GPIOG_AFRL,   VAL_GPIOG_AFRH},
+#endif
+#if STM32_HAS_GPIOH
+  {VAL_GPIOH_MODER, VAL_GPIOH_OTYPER, VAL_GPIOH_OSPEEDR, VAL_GPIOH_PUPDR,
+   VAL_GPIOH_ODR,   VAL_GPIOH_AFRL,   VAL_GPIOH_AFRH},
+#endif
+#if STM32_HAS_GPIOI
+  {VAL_GPIOI_MODER, VAL_GPIOI_OTYPER, VAL_GPIOI_OSPEEDR, VAL_GPIOI_PUPDR,
+   VAL_GPIOI_ODR,   VAL_GPIOI_AFRL,   VAL_GPIOI_AFRH}
+#endif
+};
+#endif
+
+void enter_bootloader_mode_if_requested(void);
+
+/**
+ * @brief   Early initialization code.
+ * @details This initialization must be performed just after stack setup
+ *          and before any other initialization.
+ */
+void __early_init(void) {
+  enter_bootloader_mode_if_requested();
+  stm32_clock_init();
+}
+
+#if HAL_USE_MMC_SPI || defined(__DOXYGEN__)
+/**
+ * @brief   MMC_SPI card detection.
+ */
+bool mmc_lld_is_card_inserted(MMCDriver *mmcp) {
+
+  (void)mmcp;
+  /* TODO: Fill the implementation.*/
+  return true;
+}
+
+/**
+ * @brief   MMC_SPI card write protection detection.
+ */
+bool mmc_lld_is_write_protected(MMCDriver *mmcp) {
+
+  (void)mmcp;
+  /* TODO: Fill the implementation.*/
+  return false;
+}
+#endif
+
+/**
+ * @brief   Board-specific initialization code.
+ * @todo    Add your board-specific code, if any.
+ */
+void boardInit(void) {
+}

keyboards/at_at/660m/boards/ST_STM32F072B_DISCOVERY/board.h

@@ -0,0 +1,922 @@
+/*
+    ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+/*
+ * This file has been automatically generated using ChibiStudio board
+ * generator plugin. Do not edit manually.
+ */
+
+#ifndef BOARD_H
+#define BOARD_H
+
+/*
+ * Setup for ST STM32F072B-Discovery board.
+ */
+
+/*
+ * Board identifier.
+ */
+#define BOARD_ST_STM32F072B_DISCOVERY
+#define BOARD_NAME                  "ST STM32F072B-Discovery"
+
+/*
+ * Board oscillators-related settings.
+ * NOTE: HSE not fitted.
+ */
+#if !defined(STM32_LSECLK)
+#define STM32_LSECLK                32768
+#endif
+
+#define STM32_LSEDRV                (3U << 3U)
+
+#if !defined(STM32_HSECLK)
+#define STM32_HSECLK                0U
+#endif
+
+#define STM32_HSE_BYPASS
+
+/*
+ * MCU type as defined in the ST header.
+ */
+#define STM32F072xB
+
+/*
+ * IO pins assignments.
+ */
+#define GPIOA_BUTTON                0U
+#define GPIOA_PIN1                  1U
+#define GPIOA_PIN2                  2U
+#define GPIOA_PIN3                  3U
+#define GPIOA_PIN4                  4U
+#define GPIOA_PIN5                  5U
+#define GPIOA_PIN6                  6U
+#define GPIOA_PIN7                  7U
+#define GPIOA_PIN8                  8U
+#define GPIOA_PIN9                  9U
+#define GPIOA_PIN10                 10U
+#define GPIOA_USB_DM                11U
+#define GPIOA_USB_DP                12U
+#define GPIOA_SWDIO                 13U
+#define GPIOA_SWCLK                 14U
+#define GPIOA_PIN15                 15U
+
+#define GPIOB_PIN0                  0U
+#define GPIOB_PIN1                  1U
+#define GPIOB_PIN2                  2U
+#define GPIOB_PIN3                  3U
+#define GPIOB_PIN4                  4U
+#define GPIOB_PIN5                  5U
+#define GPIOB_PIN6                  6U
+#define GPIOB_PIN7                  7U
+#define GPIOB_PIN8                  8U
+#define GPIOB_PIN9                  9U
+#define GPIOB_PIN10                 10U
+#define GPIOB_PIN11                 11U
+#define GPIOB_PIN12                 12U
+#define GPIOB_SPI2_SCK              13U
+#define GPIOB_SPI2_MISO             14U
+#define GPIOB_SPI2_MOSI             15U
+
+#define GPIOC_MEMS_CS               0U
+#define GPIOC_PIN1                  1U
+#define GPIOC_PIN2                  2U
+#define GPIOC_PIN3                  3U
+#define GPIOC_PIN4                  4U
+#define GPIOC_PIN5                  5U
+#define GPIOC_LED_RED               6U
+#define GPIOC_LED_BLUE              7U
+#define GPIOC_LED_ORANGE            8U
+#define GPIOC_LED_GREEN             9U
+#define GPIOC_PIN10                 10U
+#define GPIOC_PIN11                 11U
+#define GPIOC_PIN12                 12U
+#define GPIOC_PIN13                 13U
+#define GPIOC_OSC32_IN              14U
+#define GPIOC_OSC32_OUT             15U
+
+#define GPIOD_PIN0                  0U
+#define GPIOD_PIN1                  1U
+#define GPIOD_PIN2                  2U
+#define GPIOD_PIN3                  3U
+#define GPIOD_PIN4                  4U
+#define GPIOD_PIN5                  5U
+#define GPIOD_PIN6                  6U
+#define GPIOD_PIN7                  7U
+#define GPIOD_PIN8                  8U
+#define GPIOD_PIN9                  9U
+#define GPIOD_PIN10                 10U
+#define GPIOD_PIN11                 11U
+#define GPIOD_PIN12                 12U
+#define GPIOD_PIN13                 13U
+#define GPIOD_PIN14                 14U
+#define GPIOD_PIN15                 15U
+
+#define GPIOE_PIN0                  0U
+#define GPIOE_PIN1                  1U
+#define GPIOE_PIN2                  2U
+#define GPIOE_PIN3                  3U
+#define GPIOE_PIN4                  4U
+#define GPIOE_PIN5                  5U
+#define GPIOE_PIN6                  6U
+#define GPIOE_PIN7                  7U
+#define GPIOE_PIN8                  8U
+#define GPIOE_PIN9                  9U
+#define GPIOE_PIN10                 10U
+#define GPIOE_PIN11                 11U
+#define GPIOE_PIN12                 12U
+#define GPIOE_PIN13                 13U
+#define GPIOE_PIN14                 14U
+#define GPIOE_PIN15                 15U
+
+#define GPIOF_OSC_IN                0U
+#define GPIOF_OSC_OUT               1U
+#define GPIOF_PIN2                  2U
+#define GPIOF_PIN3                  3U
+#define GPIOF_PIN4                  4U
+#define GPIOF_PIN5                  5U
+#define GPIOF_PIN6                  6U
+#define GPIOF_PIN7                  7U
+#define GPIOF_PIN8                  8U
+#define GPIOF_PIN9                  9U
+#define GPIOF_PIN10                 10U
+#define GPIOF_PIN11                 11U
+#define GPIOF_PIN12                 12U
+#define GPIOF_PIN13                 13U
+#define GPIOF_PIN14                 14U
+#define GPIOF_PIN15                 15U
+
+/*
+ * IO lines assignments.
+ */
+#define LINE_BUTTON                 PAL_LINE(GPIOA, 0U)
+#define LINE_USB_DM                 PAL_LINE(GPIOA, 11U)
+#define LINE_USB_DP                 PAL_LINE(GPIOA, 12U)
+#define LINE_SWDIO                  PAL_LINE(GPIOA, 13U)
+#define LINE_SWCLK                  PAL_LINE(GPIOA, 14U)
+
+#define LINE_SPI2_SCK               PAL_LINE(GPIOB, 13U)
+#define LINE_SPI2_MISO              PAL_LINE(GPIOB, 14U)
+#define LINE_SPI2_MOSI              PAL_LINE(GPIOB, 15U)
+
+#define LINE_MEMS_CS                PAL_LINE(GPIOC, 0U)
+#define LINE_LED_RED                PAL_LINE(GPIOC, 6U)
+#define LINE_LED_BLUE               PAL_LINE(GPIOC, 7U)
+#define LINE_LED_ORANGE             PAL_LINE(GPIOC, 8U)
+#define LINE_LED_GREEN              PAL_LINE(GPIOC, 9U)
+#define LINE_OSC32_IN               PAL_LINE(GPIOC, 14U)
+#define LINE_OSC32_OUT              PAL_LINE(GPIOC, 15U)
+
+
+
+#define LINE_OSC_IN                 PAL_LINE(GPIOF, 0U)
+#define LINE_OSC_OUT                PAL_LINE(GPIOF, 1U)
+
+/*
+ * I/O ports initial setup, this configuration is established soon after reset
+ * in the initialization code.
+ * Please refer to the STM32 Reference Manual for details.
+ */
+#define PIN_MODE_INPUT(n)           (0U << ((n) * 2U))
+#define PIN_MODE_OUTPUT(n)          (1U << ((n) * 2U))
+#define PIN_MODE_ALTERNATE(n)       (2U << ((n) * 2U))
+#define PIN_MODE_ANALOG(n)          (3U << ((n) * 2U))
+#define PIN_ODR_LOW(n)              (0U << (n))
+#define PIN_ODR_HIGH(n)             (1U << (n))
+#define PIN_OTYPE_PUSHPULL(n)       (0U << (n))
+#define PIN_OTYPE_OPENDRAIN(n)      (1U << (n))
+#define PIN_OSPEED_VERYLOW(n)       (0U << ((n) * 2U))
+#define PIN_OSPEED_LOW(n)           (1U << ((n) * 2U))
+#define PIN_OSPEED_MEDIUM(n)        (2U << ((n) * 2U))
+#define PIN_OSPEED_HIGH(n)          (3U << ((n) * 2U))
+#define PIN_PUPDR_FLOATING(n)       (0U << ((n) * 2U))
+#define PIN_PUPDR_PULLUP(n)         (1U << ((n) * 2U))
+#define PIN_PUPDR_PULLDOWN(n)       (2U << ((n) * 2U))
+#define PIN_AFIO_AF(n, v)           ((v) << (((n) % 8U) * 4U))
+
+/*
+ * GPIOA setup:
+ *
+ * PA0  - BUTTON                    (input floating).
+ * PA1  - PIN1                      (input pullup).
+ * PA2  - PIN2                      (input pullup).
+ * PA3  - PIN3                      (input pullup).
+ * PA4  - PIN4                      (input pullup).
+ * PA5  - PIN5                      (input pullup).
+ * PA6  - PIN6                      (input pullup).
+ * PA7  - PIN7                      (input pullup).
+ * PA8  - PIN8                      (input pullup).
+ * PA9  - PIN9                      (input pullup).
+ * PA10 - PIN10                     (input pullup).
+ * PA11 - USB_DM                    (input floating).
+ * PA12 - USB_DP                    (input floating).
+ * PA13 - SWDIO                     (alternate 0).
+ * PA14 - SWCLK                     (alternate 0).
+ * PA15 - PIN15                     (input pullup).
+ */
+#define VAL_GPIOA_MODER             (PIN_MODE_INPUT(GPIOA_BUTTON) |         \
+                                     PIN_MODE_INPUT(GPIOA_PIN1) |           \
+                                     PIN_MODE_INPUT(GPIOA_PIN2) |           \
+                                     PIN_MODE_INPUT(GPIOA_PIN3) |           \
+                                     PIN_MODE_INPUT(GPIOA_PIN4) |           \
+                                     PIN_MODE_INPUT(GPIOA_PIN5) |           \
+                                     PIN_MODE_INPUT(GPIOA_PIN6) |           \
+                                     PIN_MODE_INPUT(GPIOA_PIN7) |           \
+                                     PIN_MODE_INPUT(GPIOA_PIN8) |           \
+                                     PIN_MODE_INPUT(GPIOA_PIN9) |           \
+                                     PIN_MODE_INPUT(GPIOA_PIN10) |          \
+                                     PIN_MODE_INPUT(GPIOA_USB_DM) |         \
+                                     PIN_MODE_INPUT(GPIOA_USB_DP) |         \
+                                     PIN_MODE_ALTERNATE(GPIOA_SWDIO) |      \
+                                     PIN_MODE_ALTERNATE(GPIOA_SWCLK) |      \
+                                     PIN_MODE_INPUT(GPIOA_PIN15))
+#define VAL_GPIOA_OTYPER            (PIN_OTYPE_PUSHPULL(GPIOA_BUTTON) |     \
+                                     PIN_OTYPE_PUSHPULL(GPIOA_PIN1) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOA_PIN2) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOA_PIN3) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOA_PIN4) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOA_PIN5) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOA_PIN6) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOA_PIN7) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOA_PIN8) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOA_PIN9) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOA_PIN10) |      \
+                                     PIN_OTYPE_PUSHPULL(GPIOA_USB_DM) |     \
+                                     PIN_OTYPE_PUSHPULL(GPIOA_USB_DP) |     \
+                                     PIN_OTYPE_PUSHPULL(GPIOA_SWDIO) |      \
+                                     PIN_OTYPE_PUSHPULL(GPIOA_SWCLK) |      \
+                                     PIN_OTYPE_PUSHPULL(GPIOA_PIN15))
+#define VAL_GPIOA_OSPEEDR           (PIN_OSPEED_VERYLOW(GPIOA_BUTTON) |     \
+                                     PIN_OSPEED_VERYLOW(GPIOA_PIN1) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOA_PIN2) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOA_PIN3) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOA_PIN4) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOA_PIN5) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOA_PIN6) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOA_PIN7) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOA_PIN8) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOA_PIN9) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOA_PIN10) |      \
+                                     PIN_OSPEED_VERYLOW(GPIOA_USB_DM) |     \
+                                     PIN_OSPEED_VERYLOW(GPIOA_USB_DP) |     \
+                                     PIN_OSPEED_HIGH(GPIOA_SWDIO) |         \
+                                     PIN_OSPEED_HIGH(GPIOA_SWCLK) |         \
+                                     PIN_OSPEED_HIGH(GPIOA_PIN15))
+#define VAL_GPIOA_PUPDR             (PIN_PUPDR_FLOATING(GPIOA_BUTTON) |     \
+                                     PIN_PUPDR_PULLUP(GPIOA_PIN1) |         \
+                                     PIN_PUPDR_PULLUP(GPIOA_PIN2) |         \
+                                     PIN_PUPDR_PULLUP(GPIOA_PIN3) |         \
+                                     PIN_PUPDR_PULLUP(GPIOA_PIN4) |         \
+                                     PIN_PUPDR_PULLUP(GPIOA_PIN5) |         \
+                                     PIN_PUPDR_PULLUP(GPIOA_PIN6) |         \
+                                     PIN_PUPDR_PULLUP(GPIOA_PIN7) |         \
+                                     PIN_PUPDR_PULLUP(GPIOA_PIN8) |         \
+                                     PIN_PUPDR_PULLUP(GPIOA_PIN9) |         \
+                                     PIN_PUPDR_PULLUP(GPIOA_PIN10) |        \
+                                     PIN_PUPDR_FLOATING(GPIOA_USB_DM) |     \
+                                     PIN_PUPDR_FLOATING(GPIOA_USB_DP) |     \
+                                     PIN_PUPDR_PULLUP(GPIOA_SWDIO) |        \
+                                     PIN_PUPDR_PULLDOWN(GPIOA_SWCLK) |      \
+                                     PIN_PUPDR_PULLUP(GPIOA_PIN15))
+#define VAL_GPIOA_ODR               (PIN_ODR_HIGH(GPIOA_BUTTON) |           \
+                                     PIN_ODR_HIGH(GPIOA_PIN1) |             \
+                                     PIN_ODR_HIGH(GPIOA_PIN2) |             \
+                                     PIN_ODR_HIGH(GPIOA_PIN3) |             \
+                                     PIN_ODR_HIGH(GPIOA_PIN4) |             \
+                                     PIN_ODR_HIGH(GPIOA_PIN5) |             \
+                                     PIN_ODR_HIGH(GPIOA_PIN6) |             \
+                                     PIN_ODR_HIGH(GPIOA_PIN7) |             \
+                                     PIN_ODR_HIGH(GPIOA_PIN8) |             \
+                                     PIN_ODR_HIGH(GPIOA_PIN9) |             \
+                                     PIN_ODR_HIGH(GPIOA_PIN10) |            \
+                                     PIN_ODR_HIGH(GPIOA_USB_DM) |           \
+                                     PIN_ODR_HIGH(GPIOA_USB_DP) |           \
+                                     PIN_ODR_HIGH(GPIOA_SWDIO) |            \
+                                     PIN_ODR_HIGH(GPIOA_SWCLK) |            \
+                                     PIN_ODR_HIGH(GPIOA_PIN15))
+#define VAL_GPIOA_AFRL              (PIN_AFIO_AF(GPIOA_BUTTON, 0U) |        \
+                                     PIN_AFIO_AF(GPIOA_PIN1, 0U) |          \
+                                     PIN_AFIO_AF(GPIOA_PIN2, 0U) |          \
+                                     PIN_AFIO_AF(GPIOA_PIN3, 0U) |          \
+                                     PIN_AFIO_AF(GPIOA_PIN4, 0U) |          \
+                                     PIN_AFIO_AF(GPIOA_PIN5, 0U) |          \
+                                     PIN_AFIO_AF(GPIOA_PIN6, 0U) |          \
+                                     PIN_AFIO_AF(GPIOA_PIN7, 0U))
+#define VAL_GPIOA_AFRH              (PIN_AFIO_AF(GPIOA_PIN8, 0U) |          \
+                                     PIN_AFIO_AF(GPIOA_PIN9, 0U) |          \
+                                     PIN_AFIO_AF(GPIOA_PIN10, 0U) |         \
+                                     PIN_AFIO_AF(GPIOA_USB_DM, 0U) |        \
+                                     PIN_AFIO_AF(GPIOA_USB_DP, 0U) |        \
+                                     PIN_AFIO_AF(GPIOA_SWDIO, 0U) |         \
+                                     PIN_AFIO_AF(GPIOA_SWCLK, 0U) |         \
+                                     PIN_AFIO_AF(GPIOA_PIN15, 0U))
+
+/*
+ * GPIOB setup:
+ *
+ * PB0  - PIN0                      (input pullup).
+ * PB1  - PIN1                      (input pullup).
+ * PB2  - PIN2                      (input pullup).
+ * PB3  - PIN3                      (input pullup).
+ * PB4  - PIN4                      (input pullup).
+ * PB5  - PIN5                      (input pullup).
+ * PB6  - PIN6                      (input pullup).
+ * PB7  - PIN7                      (input pullup).
+ * PB8  - PIN8                      (input pullup).
+ * PB9  - PIN9                      (input pullup).
+ * PB10 - PIN10                     (input pullup).
+ * PB11 - PIN11                     (input pullup).
+ * PB12 - PIN12                     (input pullup).
+ * PB13 - SPI2_SCK                  (alternate 0).
+ * PB14 - SPI2_MISO                 (alternate 0).
+ * PB15 - SPI2_MOSI                 (alternate 0).
+ */
+#define VAL_GPIOB_MODER             (PIN_MODE_INPUT(GPIOB_PIN0) |           \
+                                     PIN_MODE_INPUT(GPIOB_PIN1) |           \
+                                     PIN_MODE_INPUT(GPIOB_PIN2) |           \
+                                     PIN_MODE_INPUT(GPIOB_PIN3) |           \
+                                     PIN_MODE_INPUT(GPIOB_PIN4) |           \
+                                     PIN_MODE_INPUT(GPIOB_PIN5) |           \
+                                     PIN_MODE_INPUT(GPIOB_PIN6) |           \
+                                     PIN_MODE_INPUT(GPIOB_PIN7) |           \
+                                     PIN_MODE_INPUT(GPIOB_PIN8) |           \
+                                     PIN_MODE_INPUT(GPIOB_PIN9) |           \
+                                     PIN_MODE_INPUT(GPIOB_PIN10) |          \
+                                     PIN_MODE_INPUT(GPIOB_PIN11) |          \
+                                     PIN_MODE_INPUT(GPIOB_PIN12) |          \
+                                     PIN_MODE_ALTERNATE(GPIOB_SPI2_SCK) |   \
+                                     PIN_MODE_ALTERNATE(GPIOB_SPI2_MISO) |  \
+                                     PIN_MODE_ALTERNATE(GPIOB_SPI2_MOSI))
+#define VAL_GPIOB_OTYPER            (PIN_OTYPE_PUSHPULL(GPIOB_PIN0) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOB_PIN1) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOB_PIN2) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOB_PIN3) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOB_PIN4) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOB_PIN5) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOB_PIN6) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOB_PIN7) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOB_PIN8) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOB_PIN9) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOB_PIN10) |      \
+                                     PIN_OTYPE_PUSHPULL(GPIOB_PIN11) |      \
+                                     PIN_OTYPE_PUSHPULL(GPIOB_PIN12) |      \
+                                     PIN_OTYPE_PUSHPULL(GPIOB_SPI2_SCK) |   \
+                                     PIN_OTYPE_PUSHPULL(GPIOB_SPI2_MISO) |  \
+                                     PIN_OTYPE_PUSHPULL(GPIOB_SPI2_MOSI))
+#define VAL_GPIOB_OSPEEDR           (PIN_OSPEED_VERYLOW(GPIOB_PIN0) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOB_PIN1) |       \
+                                     PIN_OSPEED_HIGH(GPIOB_PIN2) |          \
+                                     PIN_OSPEED_HIGH(GPIOB_PIN3) |          \
+                                     PIN_OSPEED_HIGH(GPIOB_PIN4) |          \
+                                     PIN_OSPEED_VERYLOW(GPIOB_PIN5) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOB_PIN6) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOB_PIN7) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOB_PIN8) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOB_PIN9) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOB_PIN10) |      \
+                                     PIN_OSPEED_VERYLOW(GPIOB_PIN11) |      \
+                                     PIN_OSPEED_VERYLOW(GPIOB_PIN12) |      \
+                                     PIN_OSPEED_VERYLOW(GPIOB_SPI2_SCK) |   \
+                                     PIN_OSPEED_VERYLOW(GPIOB_SPI2_MISO) |  \
+                                     PIN_OSPEED_VERYLOW(GPIOB_SPI2_MOSI))
+#define VAL_GPIOB_PUPDR             (PIN_PUPDR_PULLUP(GPIOB_PIN0) |         \
+                                     PIN_PUPDR_PULLUP(GPIOB_PIN1) |         \
+                                     PIN_PUPDR_PULLUP(GPIOB_PIN2) |         \
+                                     PIN_PUPDR_PULLUP(GPIOB_PIN3) |         \
+                                     PIN_PUPDR_PULLUP(GPIOB_PIN4) |         \
+                                     PIN_PUPDR_PULLUP(GPIOB_PIN5) |         \
+                                     PIN_PUPDR_PULLUP(GPIOB_PIN6) |         \
+                                     PIN_PUPDR_PULLUP(GPIOB_PIN7) |         \
+                                     PIN_PUPDR_PULLUP(GPIOB_PIN8) |         \
+                                     PIN_PUPDR_PULLUP(GPIOB_PIN9) |         \
+                                     PIN_PUPDR_PULLUP(GPIOB_PIN10) |        \
+                                     PIN_PUPDR_PULLUP(GPIOB_PIN11) |        \
+                                     PIN_PUPDR_PULLUP(GPIOB_PIN12) |        \
+                                     PIN_PUPDR_FLOATING(GPIOB_SPI2_SCK) |   \
+                                     PIN_PUPDR_FLOATING(GPIOB_SPI2_MISO) |  \
+                                     PIN_PUPDR_FLOATING(GPIOB_SPI2_MOSI))
+#define VAL_GPIOB_ODR               (PIN_ODR_HIGH(GPIOB_PIN0) |             \
+                                     PIN_ODR_HIGH(GPIOB_PIN1) |             \
+                                     PIN_ODR_HIGH(GPIOB_PIN2) |             \
+                                     PIN_ODR_HIGH(GPIOB_PIN3) |             \
+                                     PIN_ODR_HIGH(GPIOB_PIN4) |             \
+                                     PIN_ODR_HIGH(GPIOB_PIN5) |             \
+                                     PIN_ODR_HIGH(GPIOB_PIN6) |             \
+                                     PIN_ODR_HIGH(GPIOB_PIN7) |             \
+                                     PIN_ODR_HIGH(GPIOB_PIN8) |             \
+                                     PIN_ODR_HIGH(GPIOB_PIN9) |             \
+                                     PIN_ODR_HIGH(GPIOB_PIN10) |            \
+                                     PIN_ODR_HIGH(GPIOB_PIN11) |            \
+                                     PIN_ODR_HIGH(GPIOB_PIN12) |            \
+                                     PIN_ODR_HIGH(GPIOB_SPI2_SCK) |         \
+                                     PIN_ODR_HIGH(GPIOB_SPI2_MISO) |        \
+                                     PIN_ODR_HIGH(GPIOB_SPI2_MOSI))
+#define VAL_GPIOB_AFRL              (PIN_AFIO_AF(GPIOB_PIN0, 0U) |          \
+                                     PIN_AFIO_AF(GPIOB_PIN1, 0U) |          \
+                                     PIN_AFIO_AF(GPIOB_PIN2, 0U) |          \
+                                     PIN_AFIO_AF(GPIOB_PIN3, 0U) |          \
+                                     PIN_AFIO_AF(GPIOB_PIN4, 0U) |          \
+                                     PIN_AFIO_AF(GPIOB_PIN5, 0U) |          \
+                                     PIN_AFIO_AF(GPIOB_PIN6, 0U) |          \
+                                     PIN_AFIO_AF(GPIOB_PIN7, 0U))
+#define VAL_GPIOB_AFRH              (PIN_AFIO_AF(GPIOB_PIN8, 0U) |          \
+                                     PIN_AFIO_AF(GPIOB_PIN9, 0U) |          \
+                                     PIN_AFIO_AF(GPIOB_PIN10, 0U) |         \
+                                     PIN_AFIO_AF(GPIOB_PIN11, 0U) |         \
+                                     PIN_AFIO_AF(GPIOB_PIN12, 0U) |         \
+                                     PIN_AFIO_AF(GPIOB_SPI2_SCK, 0U) |      \
+                                     PIN_AFIO_AF(GPIOB_SPI2_MISO, 0U) |     \
+                                     PIN_AFIO_AF(GPIOB_SPI2_MOSI, 0U))
+
+/*
+ * GPIOC setup:
+ *
+ * PC0  - MEMS_CS                   (output pushpull maximum).
+ * PC1  - PIN1                      (input pullup).
+ * PC2  - PIN2                      (input pullup).
+ * PC3  - PIN3                      (input pullup).
+ * PC4  - PIN4                      (input pullup).
+ * PC5  - PIN5                      (input pullup).
+ * PC6  - LED_RED                   (output pushpull maximum).
+ * PC7  - LED_BLUE                  (output pushpull maximum).
+ * PC8  - LED_ORANGE                (output pushpull maximum).
+ * PC9  - LED_GREEN                 (output pushpull maximum).
+ * PC10 - PIN10                     (input pullup).
+ * PC11 - PIN11                     (input pullup).
+ * PC12 - PIN12                     (input pullup).
+ * PC13 - PIN13                     (input pullup).
+ * PC14 - OSC32_IN                  (input floating).
+ * PC15 - OSC32_OUT                 (input floating).
+ */
+#define VAL_GPIOC_MODER             (PIN_MODE_OUTPUT(GPIOC_MEMS_CS) |       \
+                                     PIN_MODE_INPUT(GPIOC_PIN1) |           \
+                                     PIN_MODE_INPUT(GPIOC_PIN2) |           \
+                                     PIN_MODE_INPUT(GPIOC_PIN3) |           \
+                                     PIN_MODE_INPUT(GPIOC_PIN4) |           \
+                                     PIN_MODE_INPUT(GPIOC_PIN5) |           \
+                                     PIN_MODE_OUTPUT(GPIOC_LED_RED) |       \
+                                     PIN_MODE_OUTPUT(GPIOC_LED_BLUE) |      \
+                                     PIN_MODE_OUTPUT(GPIOC_LED_ORANGE) |    \
+                                     PIN_MODE_OUTPUT(GPIOC_LED_GREEN) |     \
+                                     PIN_MODE_INPUT(GPIOC_PIN10) |          \
+                                     PIN_MODE_INPUT(GPIOC_PIN11) |          \
+                                     PIN_MODE_INPUT(GPIOC_PIN12) |          \
+                                     PIN_MODE_INPUT(GPIOC_PIN13) |          \
+                                     PIN_MODE_INPUT(GPIOC_OSC32_IN) |       \
+                                     PIN_MODE_INPUT(GPIOC_OSC32_OUT))
+#define VAL_GPIOC_OTYPER            (PIN_OTYPE_PUSHPULL(GPIOC_MEMS_CS) |    \
+                                     PIN_OTYPE_PUSHPULL(GPIOC_PIN1) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOC_PIN2) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOC_PIN3) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOC_PIN4) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOC_PIN5) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOC_LED_RED) |    \
+                                     PIN_OTYPE_PUSHPULL(GPIOC_LED_BLUE) |   \
+                                     PIN_OTYPE_PUSHPULL(GPIOC_LED_ORANGE) | \
+                                     PIN_OTYPE_PUSHPULL(GPIOC_LED_GREEN) |  \
+                                     PIN_OTYPE_PUSHPULL(GPIOC_PIN10) |      \
+                                     PIN_OTYPE_PUSHPULL(GPIOC_PIN11) |      \
+                                     PIN_OTYPE_PUSHPULL(GPIOC_PIN12) |      \
+                                     PIN_OTYPE_PUSHPULL(GPIOC_PIN13) |      \
+                                     PIN_OTYPE_PUSHPULL(GPIOC_OSC32_IN) |   \
+                                     PIN_OTYPE_PUSHPULL(GPIOC_OSC32_OUT))
+#define VAL_GPIOC_OSPEEDR           (PIN_OSPEED_HIGH(GPIOC_MEMS_CS) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOC_PIN1) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOC_PIN2) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOC_PIN3) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOC_PIN4) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOC_PIN5) |       \
+                                     PIN_OSPEED_HIGH(GPIOC_LED_RED) |       \
+                                     PIN_OSPEED_HIGH(GPIOC_LED_BLUE) |      \
+                                     PIN_OSPEED_HIGH(GPIOC_LED_ORANGE) |    \
+                                     PIN_OSPEED_HIGH(GPIOC_LED_GREEN) |     \
+                                     PIN_OSPEED_VERYLOW(GPIOC_PIN10) |      \
+                                     PIN_OSPEED_VERYLOW(GPIOC_PIN11) |      \
+                                     PIN_OSPEED_VERYLOW(GPIOC_PIN12) |      \
+                                     PIN_OSPEED_VERYLOW(GPIOC_PIN13) |      \
+                                     PIN_OSPEED_HIGH(GPIOC_OSC32_IN) |      \
+                                     PIN_OSPEED_HIGH(GPIOC_OSC32_OUT))
+#define VAL_GPIOC_PUPDR             (PIN_PUPDR_FLOATING(GPIOC_MEMS_CS) |    \
+                                     PIN_PUPDR_PULLUP(GPIOC_PIN1) |         \
+                                     PIN_PUPDR_PULLUP(GPIOC_PIN2) |         \
+                                     PIN_PUPDR_PULLUP(GPIOC_PIN3) |         \
+                                     PIN_PUPDR_PULLUP(GPIOC_PIN4) |         \
+                                     PIN_PUPDR_PULLUP(GPIOC_PIN5) |         \
+                                     PIN_PUPDR_FLOATING(GPIOC_LED_RED) |    \
+                                     PIN_PUPDR_FLOATING(GPIOC_LED_BLUE) |   \
+                                     PIN_PUPDR_FLOATING(GPIOC_LED_ORANGE) | \
+                                     PIN_PUPDR_FLOATING(GPIOC_LED_GREEN) |  \
+                                     PIN_PUPDR_PULLUP(GPIOC_PIN10) |        \
+                                     PIN_PUPDR_PULLUP(GPIOC_PIN11) |        \
+                                     PIN_PUPDR_PULLUP(GPIOC_PIN12) |        \
+                                     PIN_PUPDR_PULLUP(GPIOC_PIN13) |        \
+                                     PIN_PUPDR_FLOATING(GPIOC_OSC32_IN) |   \
+                                     PIN_PUPDR_FLOATING(GPIOC_OSC32_OUT))
+#define VAL_GPIOC_ODR               (PIN_ODR_HIGH(GPIOC_MEMS_CS) |          \
+                                     PIN_ODR_HIGH(GPIOC_PIN1) |             \
+                                     PIN_ODR_HIGH(GPIOC_PIN2) |             \
+                                     PIN_ODR_HIGH(GPIOC_PIN3) |             \
+                                     PIN_ODR_HIGH(GPIOC_PIN4) |             \
+                                     PIN_ODR_HIGH(GPIOC_PIN5) |             \
+                                     PIN_ODR_LOW(GPIOC_LED_RED) |           \
+                                     PIN_ODR_LOW(GPIOC_LED_BLUE) |          \
+                                     PIN_ODR_LOW(GPIOC_LED_ORANGE) |        \
+                                     PIN_ODR_LOW(GPIOC_LED_GREEN) |         \
+                                     PIN_ODR_HIGH(GPIOC_PIN10) |            \
+                                     PIN_ODR_HIGH(GPIOC_PIN11) |            \
+                                     PIN_ODR_HIGH(GPIOC_PIN12) |            \
+                                     PIN_ODR_HIGH(GPIOC_PIN13) |            \
+                                     PIN_ODR_HIGH(GPIOC_OSC32_IN) |         \
+                                     PIN_ODR_HIGH(GPIOC_OSC32_OUT))
+#define VAL_GPIOC_AFRL              (PIN_AFIO_AF(GPIOC_MEMS_CS, 0U) |       \
+                                     PIN_AFIO_AF(GPIOC_PIN1, 0U) |          \
+                                     PIN_AFIO_AF(GPIOC_PIN2, 0U) |          \
+                                     PIN_AFIO_AF(GPIOC_PIN3, 0U) |          \
+                                     PIN_AFIO_AF(GPIOC_PIN4, 0U) |          \
+                                     PIN_AFIO_AF(GPIOC_PIN5, 0U) |          \
+                                     PIN_AFIO_AF(GPIOC_LED_RED, 0U) |       \
+                                     PIN_AFIO_AF(GPIOC_LED_BLUE, 0U))
+#define VAL_GPIOC_AFRH              (PIN_AFIO_AF(GPIOC_LED_ORANGE, 0U) |    \
+                                     PIN_AFIO_AF(GPIOC_LED_GREEN, 0U) |     \
+                                     PIN_AFIO_AF(GPIOC_PIN10, 0U) |         \
+                                     PIN_AFIO_AF(GPIOC_PIN11, 0U) |         \
+                                     PIN_AFIO_AF(GPIOC_PIN12, 0U) |         \
+                                     PIN_AFIO_AF(GPIOC_PIN13, 0U) |         \
+                                     PIN_AFIO_AF(GPIOC_OSC32_IN, 0U) |      \
+                                     PIN_AFIO_AF(GPIOC_OSC32_OUT, 0U))
+
+/*
+ * GPIOD setup:
+ *
+ * PD0  - PIN0                      (input pullup).
+ * PD1  - PIN1                      (input pullup).
+ * PD2  - PIN2                      (input pullup).
+ * PD3  - PIN3                      (input pullup).
+ * PD4  - PIN4                      (input pullup).
+ * PD5  - PIN5                      (input pullup).
+ * PD6  - PIN6                      (input pullup).
+ * PD7  - PIN7                      (input pullup).
+ * PD8  - PIN8                      (input pullup).
+ * PD9  - PIN9                      (input pullup).
+ * PD10 - PIN10                     (input pullup).
+ * PD11 - PIN11                     (input pullup).
+ * PD12 - PIN12                     (input pullup).
+ * PD13 - PIN13                     (input pullup).
+ * PD14 - PIN14                     (input pullup).
+ * PD15 - PIN15                     (input pullup).
+ */
+#define VAL_GPIOD_MODER             (PIN_MODE_INPUT(GPIOD_PIN0) |           \
+                                     PIN_MODE_INPUT(GPIOD_PIN1) |           \
+                                     PIN_MODE_INPUT(GPIOD_PIN2) |           \
+                                     PIN_MODE_INPUT(GPIOD_PIN3) |           \
+                                     PIN_MODE_INPUT(GPIOD_PIN4) |           \
+                                     PIN_MODE_INPUT(GPIOD_PIN5) |           \
+                                     PIN_MODE_INPUT(GPIOD_PIN6) |           \
+                                     PIN_MODE_INPUT(GPIOD_PIN7) |           \
+                                     PIN_MODE_INPUT(GPIOD_PIN8) |           \
+                                     PIN_MODE_INPUT(GPIOD_PIN9) |           \
+                                     PIN_MODE_INPUT(GPIOD_PIN10) |          \
+                                     PIN_MODE_INPUT(GPIOD_PIN11) |          \
+                                     PIN_MODE_INPUT(GPIOD_PIN12) |          \
+                                     PIN_MODE_INPUT(GPIOD_PIN13) |          \
+                                     PIN_MODE_INPUT(GPIOD_PIN14) |          \
+                                     PIN_MODE_INPUT(GPIOD_PIN15))
+#define VAL_GPIOD_OTYPER            (PIN_OTYPE_PUSHPULL(GPIOD_PIN0) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOD_PIN1) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOD_PIN2) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOD_PIN3) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOD_PIN4) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOD_PIN5) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOD_PIN6) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOD_PIN7) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOD_PIN8) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOD_PIN9) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOD_PIN10) |      \
+                                     PIN_OTYPE_PUSHPULL(GPIOD_PIN11) |      \
+                                     PIN_OTYPE_PUSHPULL(GPIOD_PIN12) |      \
+                                     PIN_OTYPE_PUSHPULL(GPIOD_PIN13) |      \
+                                     PIN_OTYPE_PUSHPULL(GPIOD_PIN14) |      \
+                                     PIN_OTYPE_PUSHPULL(GPIOD_PIN15))
+#define VAL_GPIOD_OSPEEDR           (PIN_OSPEED_VERYLOW(GPIOD_PIN0) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOD_PIN1) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOD_PIN2) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOD_PIN3) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOD_PIN4) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOD_PIN5) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOD_PIN6) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOD_PIN7) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOD_PIN8) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOD_PIN9) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOD_PIN10) |      \
+                                     PIN_OSPEED_VERYLOW(GPIOD_PIN11) |      \
+                                     PIN_OSPEED_VERYLOW(GPIOD_PIN12) |      \
+                                     PIN_OSPEED_VERYLOW(GPIOD_PIN13) |      \
+                                     PIN_OSPEED_VERYLOW(GPIOD_PIN14) |      \
+                                     PIN_OSPEED_VERYLOW(GPIOD_PIN15))
+#define VAL_GPIOD_PUPDR             (PIN_PUPDR_PULLUP(GPIOD_PIN0) |         \
+                                     PIN_PUPDR_PULLUP(GPIOD_PIN1) |         \
+                                     PIN_PUPDR_PULLUP(GPIOD_PIN2) |         \
+                                     PIN_PUPDR_PULLUP(GPIOD_PIN3) |         \
+                                     PIN_PUPDR_PULLUP(GPIOD_PIN4) |         \
+                                     PIN_PUPDR_PULLUP(GPIOD_PIN5) |         \
+                                     PIN_PUPDR_PULLUP(GPIOD_PIN6) |         \
+                                     PIN_PUPDR_PULLUP(GPIOD_PIN7) |         \
+                                     PIN_PUPDR_PULLUP(GPIOD_PIN8) |         \
+                                     PIN_PUPDR_PULLUP(GPIOD_PIN9) |         \
+                                     PIN_PUPDR_PULLUP(GPIOD_PIN10) |        \
+                                     PIN_PUPDR_PULLUP(GPIOD_PIN11) |        \
+                                     PIN_PUPDR_PULLUP(GPIOD_PIN12) |        \
+                                     PIN_PUPDR_PULLUP(GPIOD_PIN13) |        \
+                                     PIN_PUPDR_PULLUP(GPIOD_PIN14) |        \
+                                     PIN_PUPDR_PULLUP(GPIOD_PIN15))
+#define VAL_GPIOD_ODR               (PIN_ODR_HIGH(GPIOD_PIN0) |             \
+                                     PIN_ODR_HIGH(GPIOD_PIN1) |             \
+                                     PIN_ODR_HIGH(GPIOD_PIN2) |             \
+                                     PIN_ODR_HIGH(GPIOD_PIN3) |             \
+                                     PIN_ODR_HIGH(GPIOD_PIN4) |             \
+                                     PIN_ODR_HIGH(GPIOD_PIN5) |             \
+                                     PIN_ODR_HIGH(GPIOD_PIN6) |             \
+                                     PIN_ODR_HIGH(GPIOD_PIN7) |             \
+                                     PIN_ODR_HIGH(GPIOD_PIN8) |             \
+                                     PIN_ODR_HIGH(GPIOD_PIN9) |             \
+                                     PIN_ODR_HIGH(GPIOD_PIN10) |            \
+                                     PIN_ODR_HIGH(GPIOD_PIN11) |            \
+                                     PIN_ODR_HIGH(GPIOD_PIN12) |            \
+                                     PIN_ODR_HIGH(GPIOD_PIN13) |            \
+                                     PIN_ODR_HIGH(GPIOD_PIN14) |            \
+                                     PIN_ODR_HIGH(GPIOD_PIN15))
+#define VAL_GPIOD_AFRL              (PIN_AFIO_AF(GPIOD_PIN0, 0U) |          \
+                                     PIN_AFIO_AF(GPIOD_PIN1, 0U) |          \
+                                     PIN_AFIO_AF(GPIOD_PIN2, 0U) |          \
+                                     PIN_AFIO_AF(GPIOD_PIN3, 0U) |          \
+                                     PIN_AFIO_AF(GPIOD_PIN4, 0U) |          \
+                                     PIN_AFIO_AF(GPIOD_PIN5, 0U) |          \
+                                     PIN_AFIO_AF(GPIOD_PIN6, 0U) |          \
+                                     PIN_AFIO_AF(GPIOD_PIN7, 0U))
+#define VAL_GPIOD_AFRH              (PIN_AFIO_AF(GPIOD_PIN8, 0U) |          \
+                                     PIN_AFIO_AF(GPIOD_PIN9, 0U) |          \
+                                     PIN_AFIO_AF(GPIOD_PIN10, 0U) |         \
+                                     PIN_AFIO_AF(GPIOD_PIN11, 0U) |         \
+                                     PIN_AFIO_AF(GPIOD_PIN12, 0U) |         \
+                                     PIN_AFIO_AF(GPIOD_PIN13, 0U) |         \
+                                     PIN_AFIO_AF(GPIOD_PIN14, 0U) |         \
+                                     PIN_AFIO_AF(GPIOD_PIN15, 0U))
+
+/*
+ * GPIOE setup:
+ *
+ * PE0  - PIN0                      (input pullup).
+ * PE1  - PIN1                      (input pullup).
+ * PE2  - PIN2                      (input pullup).
+ * PE3  - PIN3                      (input pullup).
+ * PE4  - PIN4                      (input pullup).
+ * PE5  - PIN5                      (input pullup).
+ * PE6  - PIN6                      (input pullup).
+ * PE7  - PIN7                      (input pullup).
+ * PE8  - PIN8                      (input pullup).
+ * PE9  - PIN9                      (input pullup).
+ * PE10 - PIN10                     (input pullup).
+ * PE11 - PIN11                     (input pullup).
+ * PE12 - PIN12                     (input pullup).
+ * PE13 - PIN13                     (input pullup).
+ * PE14 - PIN14                     (input pullup).
+ * PE15 - PIN15                     (input pullup).
+ */
+#define VAL_GPIOE_MODER             (PIN_MODE_INPUT(GPIOE_PIN0) |           \
+                                     PIN_MODE_INPUT(GPIOE_PIN1) |           \
+                                     PIN_MODE_INPUT(GPIOE_PIN2) |           \
+                                     PIN_MODE_INPUT(GPIOE_PIN3) |           \
+                                     PIN_MODE_INPUT(GPIOE_PIN4) |           \
+                                     PIN_MODE_INPUT(GPIOE_PIN5) |           \
+                                     PIN_MODE_INPUT(GPIOE_PIN6) |           \
+                                     PIN_MODE_INPUT(GPIOE_PIN7) |           \
+                                     PIN_MODE_INPUT(GPIOE_PIN8) |           \
+                                     PIN_MODE_INPUT(GPIOE_PIN9) |           \
+                                     PIN_MODE_INPUT(GPIOE_PIN10) |          \
+                                     PIN_MODE_INPUT(GPIOE_PIN11) |          \
+                                     PIN_MODE_INPUT(GPIOE_PIN12) |          \
+                                     PIN_MODE_INPUT(GPIOE_PIN13) |          \
+                                     PIN_MODE_INPUT(GPIOE_PIN14) |          \
+                                     PIN_MODE_INPUT(GPIOE_PIN15))
+#define VAL_GPIOE_OTYPER            (PIN_OTYPE_PUSHPULL(GPIOE_PIN0) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOE_PIN1) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOE_PIN2) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOE_PIN3) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOE_PIN4) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOE_PIN5) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOE_PIN6) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOE_PIN7) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOE_PIN8) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOE_PIN9) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOE_PIN10) |      \
+                                     PIN_OTYPE_PUSHPULL(GPIOE_PIN11) |      \
+                                     PIN_OTYPE_PUSHPULL(GPIOE_PIN12) |      \
+                                     PIN_OTYPE_PUSHPULL(GPIOE_PIN13) |      \
+                                     PIN_OTYPE_PUSHPULL(GPIOE_PIN14) |      \
+                                     PIN_OTYPE_PUSHPULL(GPIOE_PIN15))
+#define VAL_GPIOE_OSPEEDR           (PIN_OSPEED_VERYLOW(GPIOE_PIN0) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOE_PIN1) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOE_PIN2) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOE_PIN3) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOE_PIN4) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOE_PIN5) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOE_PIN6) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOE_PIN7) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOE_PIN8) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOE_PIN9) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOE_PIN10) |      \
+                                     PIN_OSPEED_VERYLOW(GPIOE_PIN11) |      \
+                                     PIN_OSPEED_VERYLOW(GPIOE_PIN12) |      \
+                                     PIN_OSPEED_VERYLOW(GPIOE_PIN13) |      \
+                                     PIN_OSPEED_VERYLOW(GPIOE_PIN14) |      \
+                                     PIN_OSPEED_VERYLOW(GPIOE_PIN15))
+#define VAL_GPIOE_PUPDR             (PIN_PUPDR_PULLUP(GPIOE_PIN0) |         \
+                                     PIN_PUPDR_PULLUP(GPIOE_PIN1) |         \
+                                     PIN_PUPDR_PULLUP(GPIOE_PIN2) |         \
+                                     PIN_PUPDR_PULLUP(GPIOE_PIN3) |         \
+                                     PIN_PUPDR_PULLUP(GPIOE_PIN4) |         \
+                                     PIN_PUPDR_PULLUP(GPIOE_PIN5) |         \
+                                     PIN_PUPDR_PULLUP(GPIOE_PIN6) |         \
+                                     PIN_PUPDR_PULLUP(GPIOE_PIN7) |         \
+                                     PIN_PUPDR_PULLUP(GPIOE_PIN8) |         \
+                                     PIN_PUPDR_PULLUP(GPIOE_PIN9) |         \
+                                     PIN_PUPDR_PULLUP(GPIOE_PIN10) |        \
+                                     PIN_PUPDR_PULLUP(GPIOE_PIN11) |        \
+                                     PIN_PUPDR_PULLUP(GPIOE_PIN12) |        \
+                                     PIN_PUPDR_PULLUP(GPIOE_PIN13) |        \
+                                     PIN_PUPDR_PULLUP(GPIOE_PIN14) |        \
+                                     PIN_PUPDR_PULLUP(GPIOE_PIN15))
+#define VAL_GPIOE_ODR               (PIN_ODR_HIGH(GPIOE_PIN0) |             \
+                                     PIN_ODR_HIGH(GPIOE_PIN1) |             \
+                                     PIN_ODR_HIGH(GPIOE_PIN2) |             \
+                                     PIN_ODR_HIGH(GPIOE_PIN3) |             \
+                                     PIN_ODR_HIGH(GPIOE_PIN4) |             \
+                                     PIN_ODR_HIGH(GPIOE_PIN5) |             \
+                                     PIN_ODR_HIGH(GPIOE_PIN6) |             \
+                                     PIN_ODR_HIGH(GPIOE_PIN7) |             \
+                                     PIN_ODR_HIGH(GPIOE_PIN8) |             \
+                                     PIN_ODR_HIGH(GPIOE_PIN9) |             \
+                                     PIN_ODR_HIGH(GPIOE_PIN10) |            \
+                                     PIN_ODR_HIGH(GPIOE_PIN11) |            \
+                                     PIN_ODR_HIGH(GPIOE_PIN12) |            \
+                                     PIN_ODR_HIGH(GPIOE_PIN13) |            \
+                                     PIN_ODR_HIGH(GPIOE_PIN14) |            \
+                                     PIN_ODR_HIGH(GPIOE_PIN15))
+#define VAL_GPIOE_AFRL              (PIN_AFIO_AF(GPIOE_PIN0, 0U) |          \
+                                     PIN_AFIO_AF(GPIOE_PIN1, 0U) |          \
+                                     PIN_AFIO_AF(GPIOE_PIN2, 0U) |          \
+                                     PIN_AFIO_AF(GPIOE_PIN3, 0U) |          \
+                                     PIN_AFIO_AF(GPIOE_PIN4, 0U) |          \
+                                     PIN_AFIO_AF(GPIOE_PIN5, 0U) |          \
+                                     PIN_AFIO_AF(GPIOE_PIN6, 0U) |          \
+                                     PIN_AFIO_AF(GPIOE_PIN7, 0U))
+#define VAL_GPIOE_AFRH              (PIN_AFIO_AF(GPIOE_PIN8, 0U) |          \
+                                     PIN_AFIO_AF(GPIOE_PIN9, 0U) |          \
+                                     PIN_AFIO_AF(GPIOE_PIN10, 0U) |         \
+                                     PIN_AFIO_AF(GPIOE_PIN11, 0U) |         \
+                                     PIN_AFIO_AF(GPIOE_PIN12, 0U) |         \
+                                     PIN_AFIO_AF(GPIOE_PIN13, 0U) |         \
+                                     PIN_AFIO_AF(GPIOE_PIN14, 0U) |         \
+                                     PIN_AFIO_AF(GPIOE_PIN15, 0U))
+
+/*
+ * GPIOF setup:
+ *
+ * PF0  - OSC_IN                    (input floating).
+ * PF1  - OSC_OUT                   (input floating).
+ * PF2  - PIN2                      (input pullup).
+ * PF3  - PIN3                      (input pullup).
+ * PF4  - PIN4                      (input pullup).
+ * PF5  - PIN5                      (input pullup).
+ * PF6  - PIN6                      (input pullup).
+ * PF7  - PIN7                      (input pullup).
+ * PF8  - PIN8                      (input pullup).
+ * PF9  - PIN9                      (input pullup).
+ * PF10 - PIN10                     (input pullup).
+ * PF11 - PIN11                     (input pullup).
+ * PF12 - PIN12                     (input pullup).
+ * PF13 - PIN13                     (input pullup).
+ * PF14 - PIN14                     (input pullup).
+ * PF15 - PIN15                     (input pullup).
+ */
+#define VAL_GPIOF_MODER             (PIN_MODE_INPUT(GPIOF_OSC_IN) |         \
+                                     PIN_MODE_INPUT(GPIOF_OSC_OUT) |        \
+                                     PIN_MODE_INPUT(GPIOF_PIN2) |           \
+                                     PIN_MODE_INPUT(GPIOF_PIN3) |           \
+                                     PIN_MODE_INPUT(GPIOF_PIN4) |           \
+                                     PIN_MODE_INPUT(GPIOF_PIN5) |           \
+                                     PIN_MODE_INPUT(GPIOF_PIN6) |           \
+                                     PIN_MODE_INPUT(GPIOF_PIN7) |           \
+                                     PIN_MODE_INPUT(GPIOF_PIN8) |           \
+                                     PIN_MODE_INPUT(GPIOF_PIN9) |           \
+                                     PIN_MODE_INPUT(GPIOF_PIN10) |          \
+                                     PIN_MODE_INPUT(GPIOF_PIN11) |          \
+                                     PIN_MODE_INPUT(GPIOF_PIN12) |          \
+                                     PIN_MODE_INPUT(GPIOF_PIN13) |          \
+                                     PIN_MODE_INPUT(GPIOF_PIN14) |          \
+                                     PIN_MODE_INPUT(GPIOF_PIN15))
+#define VAL_GPIOF_OTYPER            (PIN_OTYPE_PUSHPULL(GPIOF_OSC_IN) |     \
+                                     PIN_OTYPE_PUSHPULL(GPIOF_OSC_OUT) |    \
+                                     PIN_OTYPE_PUSHPULL(GPIOF_PIN2) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOF_PIN3) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOF_PIN4) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOF_PIN5) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOF_PIN6) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOF_PIN7) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOF_PIN8) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOF_PIN9) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOF_PIN10) |      \
+                                     PIN_OTYPE_PUSHPULL(GPIOF_PIN11) |      \
+                                     PIN_OTYPE_PUSHPULL(GPIOF_PIN12) |      \
+                                     PIN_OTYPE_PUSHPULL(GPIOF_PIN13) |      \
+                                     PIN_OTYPE_PUSHPULL(GPIOF_PIN14) |      \
+                                     PIN_OTYPE_PUSHPULL(GPIOF_PIN15))
+#define VAL_GPIOF_OSPEEDR           (PIN_OSPEED_VERYLOW(GPIOF_OSC_IN) |     \
+                                     PIN_OSPEED_VERYLOW(GPIOF_OSC_OUT) |    \
+                                     PIN_OSPEED_VERYLOW(GPIOF_PIN2) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOF_PIN3) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOF_PIN4) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOF_PIN5) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOF_PIN6) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOF_PIN7) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOF_PIN8) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOF_PIN9) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOF_PIN10) |      \
+                                     PIN_OSPEED_VERYLOW(GPIOF_PIN11) |      \
+                                     PIN_OSPEED_VERYLOW(GPIOF_PIN12) |      \
+                                     PIN_OSPEED_VERYLOW(GPIOF_PIN13) |      \
+                                     PIN_OSPEED_VERYLOW(GPIOF_PIN14) |      \
+                                     PIN_OSPEED_VERYLOW(GPIOF_PIN15))
+#define VAL_GPIOF_PUPDR             (PIN_PUPDR_FLOATING(GPIOF_OSC_IN) |     \
+                                     PIN_PUPDR_FLOATING(GPIOF_OSC_OUT) |    \
+                                     PIN_PUPDR_PULLUP(GPIOF_PIN2) |         \
+                                     PIN_PUPDR_PULLUP(GPIOF_PIN3) |         \
+                                     PIN_PUPDR_PULLUP(GPIOF_PIN4) |         \
+                                     PIN_PUPDR_PULLUP(GPIOF_PIN5) |         \
+                                     PIN_PUPDR_PULLUP(GPIOF_PIN6) |         \
+                                     PIN_PUPDR_PULLUP(GPIOF_PIN7) |         \
+                                     PIN_PUPDR_PULLUP(GPIOF_PIN8) |         \
+                                     PIN_PUPDR_PULLUP(GPIOF_PIN9) |         \
+                                     PIN_PUPDR_PULLUP(GPIOF_PIN10) |        \
+                                     PIN_PUPDR_PULLUP(GPIOF_PIN11) |        \
+                                     PIN_PUPDR_PULLUP(GPIOF_PIN12) |        \
+                                     PIN_PUPDR_PULLUP(GPIOF_PIN13) |        \
+                                     PIN_PUPDR_PULLUP(GPIOF_PIN14) |        \
+                                     PIN_PUPDR_PULLUP(GPIOF_PIN15))
+#define VAL_GPIOF_ODR               (PIN_ODR_HIGH(GPIOF_OSC_IN) |           \
+                                     PIN_ODR_HIGH(GPIOF_OSC_OUT) |          \
+                                     PIN_ODR_HIGH(GPIOF_PIN2) |             \
+                                     PIN_ODR_HIGH(GPIOF_PIN3) |             \
+                                     PIN_ODR_HIGH(GPIOF_PIN4) |             \
+                                     PIN_ODR_HIGH(GPIOF_PIN5) |             \
+                                     PIN_ODR_HIGH(GPIOF_PIN6) |             \
+                                     PIN_ODR_HIGH(GPIOF_PIN7) |             \
+                                     PIN_ODR_HIGH(GPIOF_PIN8) |             \
+                                     PIN_ODR_HIGH(GPIOF_PIN9) |             \
+                                     PIN_ODR_HIGH(GPIOF_PIN10) |            \
+                                     PIN_ODR_HIGH(GPIOF_PIN11) |            \
+                                     PIN_ODR_HIGH(GPIOF_PIN12) |            \
+                                     PIN_ODR_HIGH(GPIOF_PIN13) |            \
+                                     PIN_ODR_HIGH(GPIOF_PIN14) |            \
+                                     PIN_ODR_HIGH(GPIOF_PIN15))
+#define VAL_GPIOF_AFRL              (PIN_AFIO_AF(GPIOF_OSC_IN, 0U) |        \
+                                     PIN_AFIO_AF(GPIOF_OSC_OUT, 0U) |       \
+                                     PIN_AFIO_AF(GPIOF_PIN2, 0U) |          \
+                                     PIN_AFIO_AF(GPIOF_PIN3, 0U) |          \
+                                     PIN_AFIO_AF(GPIOF_PIN4, 0U) |          \
+                                     PIN_AFIO_AF(GPIOF_PIN5, 0U) |          \
+                                     PIN_AFIO_AF(GPIOF_PIN6, 0U) |          \
+                                     PIN_AFIO_AF(GPIOF_PIN7, 0U))
+#define VAL_GPIOF_AFRH              (PIN_AFIO_AF(GPIOF_PIN8, 0U) |          \
+                                     PIN_AFIO_AF(GPIOF_PIN9, 0U) |          \
+                                     PIN_AFIO_AF(GPIOF_PIN10, 0U) |         \
+                                     PIN_AFIO_AF(GPIOF_PIN11, 0U) |         \
+                                     PIN_AFIO_AF(GPIOF_PIN12, 0U) |         \
+                                     PIN_AFIO_AF(GPIOF_PIN13, 0U) |         \
+                                     PIN_AFIO_AF(GPIOF_PIN14, 0U) |         \
+                                     PIN_AFIO_AF(GPIOF_PIN15, 0U))
+
+
+#if !defined(_FROM_ASM_)
+#ifdef __cplusplus
+extern "C" {
+#endif
+  void boardInit(void);
+#ifdef __cplusplus
+}
+#endif
+#endif /* _FROM_ASM_ */
+
+#endif /* BOARD_H */

keyboards/at_at/660m/boards/ST_STM32F072B_DISCOVERY/board.mk

@@ -0,0 +1,5 @@
+# List of all the board related files.
+BOARDSRC = $(BOARD_PATH)/boards/ST_STM32F072B_DISCOVERY/board.c
+
+# Required include directories
+BOARDINC = $(BOARD_PATH)/boards/ST_STM32F072B_DISCOVERY

keyboards/at_at/660m/boards/ST_STM32F072B_DISCOVERY/cfg/board.chcfg

@@ -0,0 +1,703 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<!-- STM32F0xx board Template -->
+<board
+  xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
+  xsi:noNamespaceSchemaLocation="http://www.chibios.org/xml/schema/boards/stm32f0xx_board.xsd">
+  <configuration_settings>
+    <templates_path>resources/gencfg/processors/boards/stm32f0xx/templates</templates_path>
+    <output_path>..</output_path>
+    <hal_version>3.0.x</hal_version>
+  </configuration_settings>
+  <board_name>ST STM32F072B-Discovery</board_name>
+  <board_id>ST_STM32F072B_DISCOVERY</board_id>
+  <board_functions></board_functions>
+  <subtype>STM32F072xB</subtype>
+  <clocks HSEFrequency="0" HSEBypass="true" LSEFrequency="0"
+  	LSEBypass="false" LSEDrive="3 High Drive (default)" />
+  <ports>
+    <GPIOA>
+      <pin0
+        ID="BUTTON"
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="Floating"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin1
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin2
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin3
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin4
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin5
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin6
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin7
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin8
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin9
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin10
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin11
+        ID="USB_DM"
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="Floating"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin12
+        ID="USB_DP"
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="Floating"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin13
+        ID="SWDIO"
+        Type="PushPull"
+        Speed="Maximum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Alternate"
+        Alternate="0" />
+      <pin14
+        ID="SWCLK"
+        Type="PushPull"
+        Speed="Maximum"
+        Resistor="PullDown"
+        Level="High"
+        Mode="Alternate"
+        Alternate="0" />
+      <pin15
+        ID=""
+        Type="PushPull"
+        Speed="Maximum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+    </GPIOA>
+    <GPIOB>
+      <pin0
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin1
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin2
+        ID=""
+        Type="PushPull"
+        Speed="Maximum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin3
+        ID=""
+        Type="PushPull"
+        Speed="Maximum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin4
+        ID=""
+        Type="PushPull"
+        Speed="Maximum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin5
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin6
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin7
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin8
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin9
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin10
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin11
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin12
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin13
+        ID="SPI2_SCK"
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="Floating"
+        Level="High"
+        Mode="Alternate"
+        Alternate="0" />
+      <pin14
+        ID="SPI2_MISO"
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="Floating"
+        Level="High"
+        Mode="Alternate"
+        Alternate="0" />
+      <pin15
+        ID="SPI2_MOSI"
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="Floating"
+        Level="High"
+        Mode="Alternate"
+        Alternate="0" />
+    </GPIOB>
+    <GPIOC>
+      <pin0
+        ID="MEMS_CS"
+        Type="PushPull"
+        Speed="Maximum"
+        Resistor="Floating"
+        Level="High"
+        Mode="Output"
+        Alternate="0" />
+      <pin1
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin2
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin3
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin4
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin5
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin6
+        ID="LED_RED"
+        Type="PushPull"
+        Speed="Maximum"
+        Resistor="Floating"
+        Level="Low"
+        Mode="Output"
+        Alternate="0" />
+      <pin7
+        ID="LED_BLUE"
+        Type="PushPull"
+        Speed="Maximum"
+        Resistor="Floating"
+        Level="Low"
+        Mode="Output"
+        Alternate="0" />
+      <pin8
+        ID="LED_ORANGE"
+        Type="PushPull"
+        Speed="Maximum"
+        Resistor="Floating"
+        Level="Low"
+        Mode="Output"
+        Alternate="0" ></pin8>
+      <pin9
+        ID="LED_GREEN"
+        Type="PushPull"
+        Speed="Maximum"
+        Resistor="Floating"
+        Level="Low"
+        Mode="Output"
+        Alternate="0" />
+      <pin10
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin11
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin12
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin13
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin14
+        ID="OSC32_IN"
+        Type="PushPull"
+        Speed="Maximum"
+        Resistor="Floating"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin15
+        ID="OSC32_OUT"
+        Type="PushPull"
+        Speed="Maximum"
+        Resistor="Floating"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+    </GPIOC>
+    <GPIOD>
+      <pin0
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin1
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin2
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin3
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin4
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin5
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin6
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin7
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin8
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin9
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin10
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin11
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin12
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin13
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin14
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin15
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+    </GPIOD>
+    <GPIOE>
+    	<pin0 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
+    		Level="High" Mode="Input" Alternate="0" />
+    	<pin1 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
+    		Level="High" Mode="Input" Alternate="0" />
+    	<pin2 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
+    		Level="High" Mode="Input" Alternate="0" />
+    	<pin3 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
+    		Level="High" Mode="Input" Alternate="0" />
+    	<pin4 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
+    		Level="High" Mode="Input" Alternate="0" />
+    	<pin5 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
+    		Level="High" Mode="Input" Alternate="0" />
+    	<pin6 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
+    		Level="High" Mode="Input" Alternate="0" />
+    	<pin7 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
+    		Level="High" Mode="Input" Alternate="0" />
+    	<pin8 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
+    		Level="High" Mode="Input" Alternate="0" />
+    	<pin9 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
+    		Level="High" Mode="Input" Alternate="0" />
+    	<pin10 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
+    		Level="High" Mode="Input" Alternate="0" />
+    	<pin11 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
+    		Level="High" Mode="Input" Alternate="0" />
+    	<pin12 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
+    		Level="High" Mode="Input" Alternate="0" />
+    	<pin13 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
+    		Level="High" Mode="Input" Alternate="0" />
+    	<pin14 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
+    		Level="High" Mode="Input" Alternate="0" />
+    	<pin15 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
+    		Level="High" Mode="Input" Alternate="0" />
+    </GPIOE>
+    <GPIOF>
+      <pin0
+        ID="OSC_IN"
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="Floating"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin1
+        ID="OSC_OUT"
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="Floating"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin2
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin3
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin4
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin5
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin6
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin7
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin8
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin9
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin10
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin11
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin12
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin13
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin14
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin15
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+    </GPIOF>
+  </ports>
+</board>

keyboards/at_at/660m/bootloader_defs.h

@@ -0,0 +1,7 @@
+/* Address for jumping to bootloader on STM32 chips. */
+/* It is chip dependent, the correct number can be looked up here (page 175):
+ * http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf
+ * This also requires a patch to chibios:
+ *  <tmk_dir>/tmk_core/tool/chibios/ch-bootloader-jump.patch
+ */
+#define STM32_BOOTLOADER_ADDRESS 0x1FFFC800

keyboards/at_at/660m/chconf.h

@@ -0,0 +1,524 @@
+/*
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+/**
+ * @file    templates/chconf.h
+ * @brief   Configuration file template.
+ * @details A copy of this file must be placed in each project directory, it
+ *          contains the application specific kernel settings.
+ *
+ * @addtogroup config
+ * @details Kernel related settings and hooks.
+ * @{
+ */
+
+#ifndef CHCONF_H
+#define CHCONF_H
+
+#define _CHIBIOS_RT_CONF_
+
+/*===========================================================================*/
+/**
+ * @name System timers settings
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   System time counter resolution.
+ * @note    Allowed values are 16 or 32 bits.
+ */
+#define CH_CFG_ST_RESOLUTION                32
+
+/**
+ * @brief   System tick frequency.
+ * @details Frequency of the system timer that drives the system ticks. This
+ *          setting also defines the system tick time unit.
+ */
+#define CH_CFG_ST_FREQUENCY                 10000
+
+/**
+ * @brief   Time delta constant for the tick-less mode.
+ * @note    If this value is zero then the system uses the classic
+ *          periodic tick. This value represents the minimum number
+ *          of ticks that is safe to specify in a timeout directive.
+ *          The value one is not valid, timeouts are rounded up to
+ *          this value.
+ */
+#define CH_CFG_ST_TIMEDELTA                 2
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Kernel parameters and options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Round robin interval.
+ * @details This constant is the number of system ticks allowed for the
+ *          threads before preemption occurs. Setting this value to zero
+ *          disables the preemption for threads with equal priority and the
+ *          round robin becomes cooperative. Note that higher priority
+ *          threads can still preempt, the kernel is always preemptive.
+ * @note    Disabling the round robin preemption makes the kernel more compact
+ *          and generally faster.
+ * @note    The round robin preemption is not supported in tickless mode and
+ *          must be set to zero in that case.
+ */
+#define CH_CFG_TIME_QUANTUM                 0
+
+/**
+ * @brief   Managed RAM size.
+ * @details Size of the RAM area to be managed by the OS. If set to zero
+ *          then the whole available RAM is used. The core memory is made
+ *          available to the heap allocator and/or can be used directly through
+ *          the simplified core memory allocator.
+ *
+ * @note    In order to let the OS manage the whole RAM the linker script must
+ *          provide the @p __heap_base__ and @p __heap_end__ symbols.
+ * @note    Requires @p CH_CFG_USE_MEMCORE.
+ */
+#define CH_CFG_MEMCORE_SIZE                 0
+
+/**
+ * @brief   Idle thread automatic spawn suppression.
+ * @details When this option is activated the function @p chSysInit()
+ *          does not spawn the idle thread. The application @p main()
+ *          function becomes the idle thread and must implement an
+ *          infinite loop.
+ */
+#define CH_CFG_NO_IDLE_THREAD               FALSE
+
+/* Use __WFI in the idle thread for waiting. Does lower the power
+ * consumption. */
+#define CORTEX_ENABLE_WFI_IDLE              TRUE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Performance options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   OS optimization.
+ * @details If enabled then time efficient rather than space efficient code
+ *          is used when two possible implementations exist.
+ *
+ * @note    This is not related to the compiler optimization options.
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_OPTIMIZE_SPEED               FALSE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Subsystem options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Time Measurement APIs.
+ * @details If enabled then the time measurement APIs are included in
+ *          the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_TM                       FALSE
+
+/**
+ * @brief   Threads registry APIs.
+ * @details If enabled then the registry APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_REGISTRY                 TRUE
+
+/**
+ * @brief   Threads synchronization APIs.
+ * @details If enabled then the @p chThdWait() function is included in
+ *          the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_WAITEXIT                 TRUE
+
+/**
+ * @brief   Semaphores APIs.
+ * @details If enabled then the Semaphores APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_SEMAPHORES               TRUE
+
+/**
+ * @brief   Semaphores queuing mode.
+ * @details If enabled then the threads are enqueued on semaphores by
+ *          priority rather than in FIFO order.
+ *
+ * @note    The default is @p FALSE. Enable this if you have special
+ *          requirements.
+ * @note    Requires @p CH_CFG_USE_SEMAPHORES.
+ */
+#define CH_CFG_USE_SEMAPHORES_PRIORITY      FALSE
+
+/**
+ * @brief   Mutexes APIs.
+ * @details If enabled then the mutexes APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_MUTEXES                  TRUE
+
+/**
+ * @brief   Enables recursive behavior on mutexes.
+ * @note    Recursive mutexes are heavier and have an increased
+ *          memory footprint.
+ *
+ * @note    The default is @p FALSE.
+ * @note    Requires @p CH_CFG_USE_MUTEXES.
+ */
+#define CH_CFG_USE_MUTEXES_RECURSIVE        FALSE
+
+/**
+ * @brief   Conditional Variables APIs.
+ * @details If enabled then the conditional variables APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_MUTEXES.
+ */
+#define CH_CFG_USE_CONDVARS                 TRUE
+
+/**
+ * @brief   Conditional Variables APIs with timeout.
+ * @details If enabled then the conditional variables APIs with timeout
+ *          specification are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_CONDVARS.
+ */
+#define CH_CFG_USE_CONDVARS_TIMEOUT         FALSE
+
+/**
+ * @brief   Events Flags APIs.
+ * @details If enabled then the event flags APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_EVENTS                   TRUE
+
+/**
+ * @brief   Events Flags APIs with timeout.
+ * @details If enabled then the events APIs with timeout specification
+ *          are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_EVENTS.
+ */
+#define CH_CFG_USE_EVENTS_TIMEOUT           TRUE
+
+/**
+ * @brief   Synchronous Messages APIs.
+ * @details If enabled then the synchronous messages APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_MESSAGES                 TRUE
+
+/**
+ * @brief   Synchronous Messages queuing mode.
+ * @details If enabled then messages are served by priority rather than in
+ *          FIFO order.
+ *
+ * @note    The default is @p FALSE. Enable this if you have special
+ *          requirements.
+ * @note    Requires @p CH_CFG_USE_MESSAGES.
+ */
+#define CH_CFG_USE_MESSAGES_PRIORITY        FALSE
+
+/**
+ * @brief   Mailboxes APIs.
+ * @details If enabled then the asynchronous messages (mailboxes) APIs are
+ *          included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_SEMAPHORES.
+ */
+#define CH_CFG_USE_MAILBOXES                TRUE
+
+/**
+ * @brief   Core Memory Manager APIs.
+ * @details If enabled then the core memory manager APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_MEMCORE                  FALSE
+
+/**
+ * @brief   Heap Allocator APIs.
+ * @details If enabled then the memory heap allocator APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or
+ *          @p CH_CFG_USE_SEMAPHORES.
+ * @note    Mutexes are recommended.
+ */
+#define CH_CFG_USE_HEAP                     FALSE
+
+/**
+ * @brief   Memory Pools Allocator APIs.
+ * @details If enabled then the memory pools allocator APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_MEMPOOLS                 FALSE
+
+/**
+ * @brief   Dynamic Threads APIs.
+ * @details If enabled then the dynamic threads creation APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_WAITEXIT.
+ * @note    Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS.
+ */
+#define CH_CFG_USE_DYNAMIC                  FALSE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Debug options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Debug option, kernel statistics.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_STATISTICS                   FALSE
+
+/**
+ * @brief   Debug option, system state check.
+ * @details If enabled the correct call protocol for system APIs is checked
+ *          at runtime.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_SYSTEM_STATE_CHECK           FALSE
+
+/**
+ * @brief   Debug option, parameters checks.
+ * @details If enabled then the checks on the API functions input
+ *          parameters are activated.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_ENABLE_CHECKS                FALSE
+
+/**
+ * @brief   Debug option, consistency checks.
+ * @details If enabled then all the assertions in the kernel code are
+ *          activated. This includes consistency checks inside the kernel,
+ *          runtime anomalies and port-defined checks.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_ENABLE_ASSERTS               FALSE
+
+/**
+ * @brief   Debug option, trace buffer.
+ * @details If enabled then the trace buffer is activated.
+ *
+ * @note    The default is @p CH_DBG_TRACE_MASK_DISABLED.
+ */
+#define CH_DBG_TRACE_MASK                   CH_DBG_TRACE_MASK_DISABLED
+
+/**
+ * @brief   Trace buffer entries.
+ * @note    The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is
+ *          different from @p CH_DBG_TRACE_MASK_DISABLED.
+ */
+#define CH_DBG_TRACE_BUFFER_SIZE            128
+
+/**
+ * @brief   Debug option, stack checks.
+ * @details If enabled then a runtime stack check is performed.
+ *
+ * @note    The default is @p FALSE.
+ * @note    The stack check is performed in a architecture/port dependent way.
+ *          It may not be implemented or some ports.
+ * @note    The default failure mode is to halt the system with the global
+ *          @p panic_msg variable set to @p NULL.
+ */
+#define CH_DBG_ENABLE_STACK_CHECK           FALSE
+
+/**
+ * @brief   Debug option, stacks initialization.
+ * @details If enabled then the threads working area is filled with a byte
+ *          value when a thread is created. This can be useful for the
+ *          runtime measurement of the used stack.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_FILL_THREADS                 FALSE
+
+/**
+ * @brief   Debug option, threads profiling.
+ * @details If enabled then a field is added to the @p thread_t structure that
+ *          counts the system ticks occurred while executing the thread.
+ *
+ * @note    The default is @p FALSE.
+ * @note    This debug option is not currently compatible with the
+ *          tickless mode.
+ */
+#define CH_DBG_THREADS_PROFILING            FALSE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Kernel hooks
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Threads descriptor structure extension.
+ * @details User fields added to the end of the @p thread_t structure.
+ */
+#define CH_CFG_THREAD_EXTRA_FIELDS                                          \
+  /* Add threads custom fields here.*/
+
+/**
+ * @brief   Threads initialization hook.
+ * @details User initialization code added to the @p chThdInit() API.
+ *
+ * @note    It is invoked from within @p chThdInit() and implicitly from all
+ *          the threads creation APIs.
+ */
+#define CH_CFG_THREAD_INIT_HOOK(tp) {                                       \
+  /* Add threads initialization code here.*/                                \
+}
+
+/**
+ * @brief   Threads finalization hook.
+ * @details User finalization code added to the @p chThdExit() API.
+ */
+#define CH_CFG_THREAD_EXIT_HOOK(tp) {                                       \
+  /* Add threads finalization code here.*/                                  \
+}
+
+/**
+ * @brief   Context switch hook.
+ * @details This hook is invoked just before switching between threads.
+ */
+#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) {                              \
+  /* Context switch code here.*/                                            \
+}
+
+/**
+ * @brief   ISR enter hook.
+ */
+#define CH_CFG_IRQ_PROLOGUE_HOOK() {                                        \
+  /* IRQ prologue code here.*/                                              \
+}
+
+/**
+ * @brief   ISR exit hook.
+ */
+#define CH_CFG_IRQ_EPILOGUE_HOOK() {                                        \
+  /* IRQ epilogue code here.*/                                              \
+}
+
+/**
+ * @brief   Idle thread enter hook.
+ * @note    This hook is invoked within a critical zone, no OS functions
+ *          should be invoked from here.
+ * @note    This macro can be used to activate a power saving mode.
+ */
+#define CH_CFG_IDLE_ENTER_HOOK() {                                          \
+  /* Idle-enter code here.*/                                                \
+}
+
+/**
+ * @brief   Idle thread leave hook.
+ * @note    This hook is invoked within a critical zone, no OS functions
+ *          should be invoked from here.
+ * @note    This macro can be used to deactivate a power saving mode.
+ */
+#define CH_CFG_IDLE_LEAVE_HOOK() {                                          \
+  /* Idle-leave code here.*/                                                \
+}
+
+/**
+ * @brief   Idle Loop hook.
+ * @details This hook is continuously invoked by the idle thread loop.
+ */
+#define CH_CFG_IDLE_LOOP_HOOK() {                                           \
+  /* Idle loop code here.*/                                                 \
+}
+
+/**
+ * @brief   System tick event hook.
+ * @details This hook is invoked in the system tick handler immediately
+ *          after processing the virtual timers queue.
+ */
+#define CH_CFG_SYSTEM_TICK_HOOK() {                                         \
+  /* System tick event code here.*/                                         \
+}
+
+/**
+ * @brief   System halt hook.
+ * @details This hook is invoked in case to a system halting error before
+ *          the system is halted.
+ */
+#define CH_CFG_SYSTEM_HALT_HOOK(reason) {                                   \
+  /* System halt code here.*/                                               \
+}
+
+/**
+ * @brief   Trace hook.
+ * @details This hook is invoked each time a new record is written in the
+ *          trace buffer.
+ */
+#define CH_CFG_TRACE_HOOK(tep) {                                            \
+  /* Trace code here.*/                                                     \
+}
+
+/** @} */
+
+/*===========================================================================*/
+/* Port-specific settings (override port settings defaulted in chcore.h).    */
+/*===========================================================================*/
+
+#endif  /* CHCONF_H */
+
+/** @} */

keyboards/at_at/660m/config.h

@@ -0,0 +1,66 @@
+/*
+Copyright 2015 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0xA22A
+#define PRODUCT_ID      0x6600
+#define DEVICE_VER      0x0001
+/* in python2: list(u"whatever".encode('utf-16-le')) */
+/*   at most 32 characters or the ugly hack in usb_main.c borks */
+#define MANUFACTURER    AT-AT
+#define PRODUCT         660M
+#define DESCRIPTION     660M Keyboard
+
+/* key matrix size */
+#define MATRIX_ROWS 5
+#define MATRIX_COLS 16
+
+#define MATRIX_COL_PINS { B15, B14, B13, B12, B11, B10, B2, B1, B9, B8, B7, B6, B5, B3, B4, B0 }
+#define MATRIX_ROW_PINS { A3, A4, A5, A0, A1 }
+#define DIODE_DIRECTION COL2ROW
+
+/* define if matrix has ghost */
+//#define MATRIX_HAS_GHOST
+
+/* Set 0 if debouncing isn't needed */
+#define DEBOUNCE    5
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+
+/*
+ * Feature disable options
+ *  These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+//#define NO_DEBUG
+
+/* disable print */
+//#define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+//#define NO_ACTION_MACRO
+//#define NO_ACTION_FUNCTION

keyboards/at_at/660m/halconf.h

@@ -0,0 +1,354 @@
+/*
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+/**
+ * @file    templates/halconf.h
+ * @brief   HAL configuration header.
+ * @details HAL configuration file, this file allows to enable or disable the
+ *          various device drivers from your application. You may also use
+ *          this file in order to override the device drivers default settings.
+ *
+ * @addtogroup HAL_CONF
+ * @{
+ */
+
+#ifndef _HALCONF_H_
+#define _HALCONF_H_
+
+#include "mcuconf.h"
+
+/**
+ * @brief   Enables the PAL subsystem.
+ */
+#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__)
+#define HAL_USE_PAL                 TRUE
+#endif
+
+/**
+ * @brief   Enables the ADC subsystem.
+ */
+#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__)
+#define HAL_USE_ADC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the CAN subsystem.
+ */
+#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__)
+#define HAL_USE_CAN                 FALSE
+#endif
+
+/**
+ * @brief   Enables the DAC subsystem.
+ */
+#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__)
+#define HAL_USE_DAC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the EXT subsystem.
+ */
+#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__)
+#define HAL_USE_EXT                 FALSE
+#endif
+
+/**
+ * @brief   Enables the GPT subsystem.
+ */
+#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__)
+#define HAL_USE_GPT                 FALSE
+#endif
+
+/**
+ * @brief   Enables the I2C subsystem.
+ */
+#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__)
+#define HAL_USE_I2C                 TRUE
+#endif
+
+/**
+ * @brief   Enables the I2S subsystem.
+ */
+#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__)
+#define HAL_USE_I2S                 FALSE
+#endif
+
+/**
+ * @brief   Enables the ICU subsystem.
+ */
+#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__)
+#define HAL_USE_ICU                 FALSE
+#endif
+
+/**
+ * @brief   Enables the MAC subsystem.
+ */
+#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__)
+#define HAL_USE_MAC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the MMC_SPI subsystem.
+ */
+#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__)
+#define HAL_USE_MMC_SPI             FALSE
+#endif
+
+/**
+ * @brief   Enables the PWM subsystem.
+ */
+#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__)
+#define HAL_USE_PWM                 TRUE
+#endif
+
+/**
+ * @brief   Enables the RTC subsystem.
+ */
+#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__)
+#define HAL_USE_RTC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the SDC subsystem.
+ */
+#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__)
+#define HAL_USE_SDC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the SERIAL subsystem.
+ */
+#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__)
+#define HAL_USE_SERIAL              FALSE
+#endif
+
+/**
+ * @brief   Enables the SERIAL over USB subsystem.
+ */
+#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__)
+#define HAL_USE_SERIAL_USB          FALSE
+#endif
+
+/**
+ * @brief   Enables the SPI subsystem.
+ */
+#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__)
+#define HAL_USE_SPI                 TRUE
+#endif
+
+/**
+ * @brief   Enables the UART subsystem.
+ */
+#if !defined(HAL_USE_UART) || defined(__DOXYGEN__)
+#define HAL_USE_UART                FALSE
+#endif
+
+/**
+ * @brief   Enables the USB subsystem.
+ */
+#if !defined(HAL_USE_USB) || defined(__DOXYGEN__)
+#define HAL_USE_USB                 TRUE
+#endif
+
+/**
+ * @brief   Enables the WDG subsystem.
+ */
+#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__)
+#define HAL_USE_WDG                 FALSE
+#endif
+
+/*===========================================================================*/
+/* ADC driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__)
+#define ADC_USE_WAIT                TRUE
+#endif
+
+/**
+ * @brief   Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define ADC_USE_MUTUAL_EXCLUSION    TRUE
+#endif
+
+/*===========================================================================*/
+/* CAN driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Sleep mode related APIs inclusion switch.
+ */
+#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__)
+#define CAN_USE_SLEEP_MODE          TRUE
+#endif
+
+/*===========================================================================*/
+/* I2C driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables the mutual exclusion APIs on the I2C bus.
+ */
+#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define I2C_USE_MUTUAL_EXCLUSION    TRUE
+#endif
+
+/*===========================================================================*/
+/* MAC driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables an event sources for incoming packets.
+ */
+#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__)
+#define MAC_USE_ZERO_COPY           FALSE
+#endif
+
+/**
+ * @brief   Enables an event sources for incoming packets.
+ */
+#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__)
+#define MAC_USE_EVENTS              TRUE
+#endif
+
+/*===========================================================================*/
+/* MMC_SPI driver related settings.                                          */
+/*===========================================================================*/
+
+/**
+ * @brief   Delays insertions.
+ * @details If enabled this options inserts delays into the MMC waiting
+ *          routines releasing some extra CPU time for the threads with
+ *          lower priority, this may slow down the driver a bit however.
+ *          This option is recommended also if the SPI driver does not
+ *          use a DMA channel and heavily loads the CPU.
+ */
+#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__)
+#define MMC_NICE_WAITING            TRUE
+#endif
+
+/*===========================================================================*/
+/* SDC driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Number of initialization attempts before rejecting the card.
+ * @note    Attempts are performed at 10mS intervals.
+ */
+#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__)
+#define SDC_INIT_RETRY              100
+#endif
+
+/**
+ * @brief   Include support for MMC cards.
+ * @note    MMC support is not yet implemented so this option must be kept
+ *          at @p FALSE.
+ */
+#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__)
+#define SDC_MMC_SUPPORT             FALSE
+#endif
+
+/**
+ * @brief   Delays insertions.
+ * @details If enabled this options inserts delays into the MMC waiting
+ *          routines releasing some extra CPU time for the threads with
+ *          lower priority, this may slow down the driver a bit however.
+ */
+#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__)
+#define SDC_NICE_WAITING            TRUE
+#endif
+
+/*===========================================================================*/
+/* SERIAL driver related settings.                                           */
+/*===========================================================================*/
+
+/**
+ * @brief   Default bit rate.
+ * @details Configuration parameter, this is the baud rate selected for the
+ *          default configuration.
+ */
+#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__)
+#define SERIAL_DEFAULT_BITRATE      38400
+#endif
+
+/**
+ * @brief   Serial buffers size.
+ * @details Configuration parameter, you can change the depth of the queue
+ *          buffers depending on the requirements of your application.
+ * @note    The default is 64 bytes for both the transmission and receive
+ *          buffers.
+ */
+#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__)
+#define SERIAL_BUFFERS_SIZE         16
+#endif
+
+/*===========================================================================*/
+/* SERIAL_USB driver related setting.                                        */
+/*===========================================================================*/
+
+/**
+ * @brief   Serial over USB buffers size.
+ * @details Configuration parameter, the buffer size must be a multiple of
+ *          the USB data endpoint maximum packet size.
+ * @note    The default is 64 bytes for both the transmission and receive
+ *          buffers.
+ */
+#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__)
+#define SERIAL_USB_BUFFERS_SIZE     1
+#endif
+
+/*===========================================================================*/
+/* SPI driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__)
+#define SPI_USE_WAIT                TRUE
+#endif
+
+/**
+ * @brief   Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define SPI_USE_MUTUAL_EXCLUSION    TRUE
+#endif
+
+
+/*===========================================================================*/
+/* USB driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__)
+#define USB_USE_WAIT                TRUE
+#endif
+
+#endif /* _HALCONF_H_ */
+
+/** @} */

keyboards/at_at/660m/info.json

@@ -0,0 +1,18 @@
+{
+    "keyboard_name": "AT-AT 660M",
+    "url": "",
+    "maintainer": "adrientetar",
+    "width": 16.5,
+    "height": 5,
+    "layouts": {
+        "LAYOUT": {
+            "layout": [
+                {"label":"Esc", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"@", "x":2, "y":0}, {"label":"#", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"label":"Backspace", "x":13, "y":0, "w":2}, {"label":"Ins", "x":15.5, "y":0},
+                {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, {"label":"|", "x":13.5, "y":1, "w":1.5}, {"label":"Del", "x":15.5, "y":1},
+                {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"\"", "x":11.75, "y":2}, {"label":"Enter", "x":12.75, "y":2, "w":2.25},
+                {"label":"Shift", "x":0, "y":3, "w":2.25}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":"<", "x":9.25, "y":3}, {"label":">", "x":10.25, "y":3}, {"label":"?", "x":11.25, "y":3}, {"label":"Shift", "x":12.25, "y":3, "w":2.25}, {"label":"&uarr;", "x":14.5, "y":3},
+                {"label":"Ctrl", "x":0, "y":4, "w":1.25}, {"label":"Win", "x":1.25, "y":4, "w":1}, {"label":"Alt", "x":2.25, "y":4, "w":1.25}, {"x":3.5, "y":4, "w":6.25}, {"label":"Alt", "x":9.75, "y":4, "w":1.25}, {"label":"Fn", "x":11, "y":4, "w":1.25}, {"label":"Ctrl", "x":12.25, "y":4, "w":1.25}, {"label":"&larr;", "x":13.5, "y":4}, {"label":"&darr;", "x":14.5, "y":4}, {"label":"&rarr;", "x":15.5, "y":4}
+            ]
+        }
+    }
+}

keyboards/at_at/660m/keymaps/default/keymap.c

@@ -0,0 +1,43 @@
+/*
+Copyright 2012,2013 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+#include QMK_KEYBOARD_H
+
+
+// Each layer gets a name for readability, which is then used in the keymap matrix below.
+// The underscores don't mean anything - you can have a layer called STUFF or any other name.
+// Layer names don't all need to be of the same length, obviously, and you can also skip them
+// entirely and just use numbers.
+#define _BASE 0
+#define _FN1 1
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+  [_BASE] = LAYOUT(
+    KC_GESC, KC_1,    KC_2,    KC_3,   KC_4,   KC_5,   KC_6,   KC_7,   KC_8,   KC_9,    KC_0,    KC_MINS, KC_EQL,   KC_BSPC,                   KC_INS,
+    KC_TAB,  KC_Q,    KC_W,    KC_E,   KC_R,   KC_T,   KC_Y,   KC_U,   KC_I,   KC_O,    KC_P,    KC_LBRC, KC_RBRC,  KC_BSLS,                   KC_DEL,
+    KC_CAPS, KC_A,    KC_S,    KC_D,   KC_F,   KC_G,   KC_H,   KC_J,   KC_K,   KC_L,    KC_SCLN, KC_QUOT,           KC_ENT,
+    KC_LSFT,          KC_Z,    KC_X,   KC_C,   KC_V,   KC_B,   KC_N,   KC_M,   KC_COMM, KC_DOT,  KC_SLSH,           KC_RSFT,          KC_UP,
+    KC_LCTL, KC_LGUI, KC_LALT,                         KC_SPC,                                   KC_RALT, MO(_FN1), KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT
+  ),
+
+  [_FN1] = LAYOUT(
+    KC_GRV,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_MUTE,          KC_VOLU,
+    _______, _______, _______, _______, _______, _______, _______, _______, KC_PSCR, KC_SLCK, KC_PAUS, KC_MPRV, KC_MNXT, KC_MPLY,          KC_VOLD,
+    _______, _______, _______, _______, _______, _______, _______, _______, KC_HOME, KC_PGUP, _______, _______,          _______,
+    _______,          _______, _______, _______, _______, _______, _______, _______, KC_END,  KC_PGDN, _______,          _______, KC_PGUP,
+    _______, _______, _______,                            _______,                            _______, _______, _______, KC_HOME, KC_PGDN, KC_END
+  )
+};

keyboards/at_at/660m/mcuconf.h

@@ -0,0 +1,176 @@
+/*
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+#ifndef _MCUCONF_H_
+#define _MCUCONF_H_
+
+/*
+ * STM32F0xx drivers configuration.
+ * The following settings override the default settings present in
+ * the various device driver implementation headers.
+ * Note that the settings for each driver only have effect if the whole
+ * driver is enabled in halconf.h.
+ *
+ * IRQ priorities:
+ * 3...0       Lowest...Highest.
+ *
+ * DMA priorities:
+ * 0...3        Lowest...Highest.
+ */
+
+#define STM32F0xx_MCUCONF
+// #define STM32F070xB
+
+/*
+ * HAL driver system settings.
+ */
+#define STM32_NO_INIT                       FALSE
+#define STM32_PVD_ENABLE                    FALSE
+#define STM32_PLS                           STM32_PLS_LEV0
+#define STM32_HSI_ENABLED                   TRUE
+#define STM32_HSI14_ENABLED                 TRUE
+#define STM32_HSI48_ENABLED                 FALSE
+#define STM32_LSI_ENABLED                   TRUE
+#define STM32_HSE_ENABLED                   FALSE
+#define STM32_LSE_ENABLED                   FALSE
+#define STM32_SW                            STM32_SW_PLL
+#define STM32_PLLSRC                        STM32_PLLSRC_HSI_DIV2
+#define STM32_PREDIV_VALUE                  1
+#define STM32_PLLMUL_VALUE                  12
+#define STM32_HPRE                          STM32_HPRE_DIV1
+#define STM32_PPRE                          STM32_PPRE_DIV1
+#define STM32_ADCSW                         STM32_ADCSW_HSI14
+#define STM32_ADCPRE                        STM32_ADCPRE_DIV4
+#define STM32_MCOSEL                        STM32_MCOSEL_NOCLOCK
+#define STM32_ADCPRE                        STM32_ADCPRE_DIV4
+#define STM32_ADCSW                         STM32_ADCSW_HSI14
+#define STM32_USBSW                         STM32_USBSW_HSI48
+#define STM32_CECSW                         STM32_CECSW_HSI
+#define STM32_I2C1SW                        STM32_I2C1SW_HSI
+#define STM32_USART1SW                      STM32_USART1SW_PCLK
+#define STM32_RTCSEL                        STM32_RTCSEL_LSI
+
+/*
+ * ADC driver system settings.
+ */
+#define STM32_ADC_USE_ADC1                  FALSE
+#define STM32_ADC_ADC1_DMA_PRIORITY         2
+#define STM32_ADC_IRQ_PRIORITY              2
+#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY     2
+
+/*
+ * EXT driver system settings.
+ */
+#define STM32_EXT_EXTI0_1_IRQ_PRIORITY      3
+#define STM32_EXT_EXTI2_3_IRQ_PRIORITY      3
+#define STM32_EXT_EXTI4_15_IRQ_PRIORITY     3
+#define STM32_EXT_EXTI16_IRQ_PRIORITY       3
+#define STM32_EXT_EXTI17_IRQ_PRIORITY       3
+
+/*
+ * GPT driver system settings.
+ */
+#define STM32_GPT_USE_TIM1                  FALSE
+#define STM32_GPT_USE_TIM2                  FALSE
+#define STM32_GPT_USE_TIM3                  FALSE
+#define STM32_GPT_USE_TIM14                 FALSE
+#define STM32_GPT_TIM1_IRQ_PRIORITY         2
+#define STM32_GPT_TIM2_IRQ_PRIORITY         2
+#define STM32_GPT_TIM3_IRQ_PRIORITY         2
+#define STM32_GPT_TIM14_IRQ_PRIORITY        2
+
+/*
+ * I2C driver system settings.
+ */
+#define STM32_I2C_USE_I2C1                  TRUE
+#define STM32_I2C_USE_I2C2                  FALSE
+#define STM32_I2C_BUSY_TIMEOUT              50
+#define STM32_I2C_I2C1_IRQ_PRIORITY         3
+#define STM32_I2C_I2C2_IRQ_PRIORITY         3
+#define STM32_I2C_USE_DMA                   TRUE
+#define STM32_I2C_I2C1_DMA_PRIORITY         1
+#define STM32_I2C_I2C2_DMA_PRIORITY         1
+#define STM32_I2C_I2C1_RX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 7)
+#define STM32_I2C_I2C1_TX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 6)
+#define STM32_I2C_DMA_ERROR_HOOK(i2cp)      osalSysHalt("DMA failure")
+
+/*
+ * ICU driver system settings.
+ */
+#define STM32_ICU_USE_TIM1                  FALSE
+#define STM32_ICU_USE_TIM2                  FALSE
+#define STM32_ICU_USE_TIM3                  FALSE
+#define STM32_ICU_TIM1_IRQ_PRIORITY         3
+#define STM32_ICU_TIM2_IRQ_PRIORITY         3
+#define STM32_ICU_TIM3_IRQ_PRIORITY         3
+
+/*
+ * PWM driver system settings.
+ */
+#define STM32_PWM_USE_ADVANCED              FALSE
+#define STM32_PWM_USE_TIM1                  FALSE
+#define STM32_PWM_USE_TIM2                  FALSE
+#define STM32_PWM_USE_TIM3                  TRUE
+#define STM32_PWM_TIM1_IRQ_PRIORITY         3
+#define STM32_PWM_TIM2_IRQ_PRIORITY         3
+#define STM32_PWM_TIM3_IRQ_PRIORITY         3
+
+/*
+ * SERIAL driver system settings.
+ */
+#define STM32_SERIAL_USE_USART1             FALSE
+#define STM32_SERIAL_USE_USART2             FALSE
+#define STM32_SERIAL_USART1_PRIORITY        3
+#define STM32_SERIAL_USART2_PRIORITY        3
+
+/*
+ * SPI driver system settings.
+ */
+#define STM32_SPI_USE_SPI1                  FALSE
+#define STM32_SPI_USE_SPI2                  TRUE
+#define STM32_SPI_SPI1_DMA_PRIORITY         1
+#define STM32_SPI_SPI2_DMA_PRIORITY         1
+#define STM32_SPI_SPI1_IRQ_PRIORITY         2
+#define STM32_SPI_SPI2_IRQ_PRIORITY         2
+#define STM32_SPI_SPI2_RX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 4)
+#define STM32_SPI_SPI2_TX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 5)
+#define STM32_SPI_DMA_ERROR_HOOK(spip)      osalSysHalt("DMA failure")
+
+/*
+ * ST driver system settings.
+ */
+#define STM32_ST_IRQ_PRIORITY               2
+#define STM32_ST_USE_TIMER                  2
+
+/*
+ * UART driver system settings.
+ */
+#define STM32_UART_USE_USART1               FALSE
+#define STM32_UART_USE_USART2               FALSE
+#define STM32_UART_USART1_IRQ_PRIORITY      3
+#define STM32_UART_USART2_IRQ_PRIORITY      3
+#define STM32_UART_USART1_DMA_PRIORITY      0
+#define STM32_UART_USART2_DMA_PRIORITY      0
+#define STM32_UART_DMA_ERROR_HOOK(uartp)    osalSysHalt("DMA failure")
+
+/*
+ * USB driver system settings.
+ */
+#define STM32_USB_USE_USB1                  TRUE
+#define STM32_USB_LOW_POWER_ON_SUSPEND      FALSE
+#define STM32_USB_USB1_LP_IRQ_PRIORITY      3
+
+#endif /* _MCUCONF_H_ */

keyboards/at_at/660m/readme.md

@@ -0,0 +1,14 @@
+# AT-AT 660M
+
+660M keyboard
+
+Keyboard Maintainer: [Adrien Tétar](https://github.com/adrientetar)  
+Hardware Supported: AT-AT 660M  
+Hardware Availability: <https://github.com/adrientetar/660m>
+
+
+Make example for this keyboard (after setting up your build environment):
+
+    make at_at/660m:default
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

keyboards/at_at/660m/rules.mk

@@ -0,0 +1,53 @@
+# project specific files
+# SRC = ssd1306.c
+## chip/board settings
+# the next two should match the directories in
+#  <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)
+MCU_FAMILY = STM32
+MCU_SERIES = STM32F0xx
+# linker script to use
+# it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/
+#  or <this_dir>/ld/
+MCU_LDSCRIPT = STM32F072xB
+# startup code to use
+# is should exist in <chibios>/os/common/ports/ARMCMx/compilers/GCC/mk/
+MCU_STARTUP = stm32f0xx
+# it should exist either in <chibios>/os/hal/boards/
+#  or <this_dir>/boards
+BOARD = ST_STM32F072B_DISCOVERY
+# Cortex version
+# Teensy LC is cortex-m0; Teensy 3.x are cortex-m4
+MCU  = cortex-m0
+# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7
+ARMV = 6
+# If you want to be able to jump to bootloader from firmware on STM32 MCUs,
+# set the correct BOOTLOADER_ADDRESS. Either set it here, or define it in
+# ./bootloader_defs.h or in ./boards/<FOO>/bootloader_defs.h (if you have
+# a custom board definition that you plan to reuse).
+# If you're not setting it here, leave it commented out.
+# It is chip dependent, the correct number can be looked up here (page 175):
+# http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf
+# This also requires a patch to chibios:
+#   <tmk_dir>/tmk_core/tool/chibios/ch-bootloader-jump.patch
+#STM32_BOOTLOADER_ADDRESS = 0x1FFFC800
+
+# Options to pass to dfu-util when flashing
+DFU_ARGS = -d 0483:df11 -a 0 -s 0x08000000:leave
+DFU_SUFFIX_ARGS = -p df11 -v 0483
+
+# Build Options
+#   comment out to disable the options.
+#
+
+#BOOTMAGIC_ENABLE = yes	# Virtual DIP switch configuration
+MOUSEKEY_ENABLE = yes	# Mouse keys
+EXTRAKEY_ENABLE = yes	# Audio control and System control
+CONSOLE_ENABLE = yes	# Console for debug
+COMMAND_ENABLE = yes    # Commands for debug and configuration
+#SLEEP_LED_ENABLE = yes  # Breathing sleep LED during USB suspend
+NKRO_ENABLE = yes	    # USB Nkey Rollover
+CUSTOM_MATRIX = no # Custom matrix file
+# BACKLIGHT_ENABLE = yes
+# RGBLIGHT_ENABLE = yes
+NO_USB_STARTUP_CHECK = yes # Workaround for issue 6369
+

keyboards/bfake/rules.mk

@@ -15,19 +15,15 @@
 
 # MCU name
 MCU = atmega32a
-PROTOCOL = VUSB
 
-# unsupported features for now
+# Bootloader selection
-NO_UART = yes
+#   Teensy       halfkay
-NO_SUSPEND_POWER_DOWN = yes
+#   Pro Micro    caterina
-
+#   Atmel DFU    atmel-dfu
-# processor frequency
+#   LUFA DFU     lufa-dfu
-F_CPU = 12000000
+#   QMK DFU      qmk-dfu
-
+#   ATmega32A    bootloadHID
-# Bootloader
+#   ATmega328P   USBasp
-#     This definition is optional, and if your keyboard supports multiple bootloaders of
-#     different sizes, comment this out, and the correct address will be loaded 
-#     automatically (+60). See bootloader.mk for all options.
 BOOTLOADER = bootloadHID
 
 # build options
@@ -45,6 +41,3 @@ OPT_DEFS = -DDEBUG_LEVEL=0
 # custom matrix setup
 CUSTOM_MATRIX = yes
 SRC = matrix.c i2c.c
-
-# programming options
-PROGRAM_CMD = ./util/atmega32a_program.py $(TARGET).hex

keyboards/bigseries/rules.mk

@@ -1,45 +1,15 @@
 # MCU name
 MCU = atmega32u2
 
-# Processor frequency.
+# Bootloader selection
-#     This will define a symbol, F_CPU, in all source code files equal to the
+#   Teensy       halfkay
-#     processor frequency in Hz. You can then use this symbol in your source code to
+#   Pro Micro    caterina
-#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+#   Atmel DFU    atmel-dfu
-#     automatically to create a 32-bit value in your source code.
+#   LUFA DFU     lufa-dfu
-#
+#   QMK DFU      qmk-dfu
-#     This will be an integer division of F_USB below, as it is sourced by
+#   ATmega32A    bootloadHID
-#     F_USB after it has run through any CPU prescalers. Note that this value
+#   ATmega328P   USBasp
-#     does not *change* the processor frequency - it should merely be updated to
+BOOTLOADER = atmel-dfu
-#     reflect the processor speed set externally so that the code can use accurate
-#     software delays.
-F_CPU = 16000000
-
-#
-# LUFA specific
-#
-# Target architecture (see library "Board Types" documentation).
-ARCH = AVR8
-
-# Input clock frequency.
-#     This will define a symbol, F_USB, in all source code files equal to the
-#     input clock frequency (before any prescaling is performed) in Hz. This value may
-#     differ from F_CPU if prescaling is used on the latter, and is required as the
-#     raw input clock is fed directly to the PLL sections of the AVR for high speed
-#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
-#     at the end, this will be done automatically to create a 32-bit value in your
-#     source code.
-#
-#     If no clock division is performed on the input clock inside the AVR (via the
-#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
-F_USB = $(F_CPU)
-
-# Interrupt driven control endpoint task(+60)
-OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
-
-
-# Boot Section Size in *bytes*
-OPT_DEFS += -DBOOTLOADER_SIZE=4096
-
 
 # Build Options
 #   comment out to disable the options.

keyboards/bpiphany/frosty_flake/rules.mk

@@ -1,51 +1,15 @@
 # MCU name
 MCU = atmega32u2
 
-# Processor frequency.
+# Bootloader selection
-#     This will define a symbol, F_CPU, in all source code files equal to the
+#   Teensy       halfkay
-#     processor frequency in Hz. You can then use this symbol in your source code to
+#   Pro Micro    caterina
-#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+#   Atmel DFU    atmel-dfu
-#     automatically to create a 32-bit value in your source code.
+#   LUFA DFU     lufa-dfu
-#
+#   QMK DFU      qmk-dfu
-#     This will be an integer division of F_USB below, as it is sourced by
+#   ATmega32A    bootloadHID
-#     F_USB after it has run through any CPU prescalers. Note that this value
+#   ATmega328P   USBasp
-#     does not *change* the processor frequency - it should merely be updated to
+BOOTLOADER = atmel-dfu
-#     reflect the processor speed set externally so that the code can use accurate
-#     software delays.
-F_CPU = 16000000
-
-
-#
-# LUFA specific
-#
-# Target architecture (see library "Board Types" documentation).
-ARCH = AVR8
-
-# Input clock frequency.
-#     This will define a symbol, F_USB, in all source code files equal to the
-#     input clock frequency (before any prescaling is performed) in Hz. This value may
-#     differ from F_CPU if prescaling is used on the latter, and is required as the
-#     raw input clock is fed directly to the PLL sections of the AVR for high speed
-#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
-#     at the end, this will be done automatically to create a 32-bit value in your
-#     source code.
-#
-#     If no clock division is performed on the input clock inside the AVR (via the
-#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
-F_USB = $(F_CPU)
-
-# Interrupt driven control endpoint task(+60)
-OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
-
-
-# Boot Section Size in *bytes*
-#   Teensy halfKay   512
-#   Teensy++ halfKay 1024
-#   Atmel DFU loader 4096
-#   LUFA bootloader  4096
-#   USBaspLoader     2048
-OPT_DEFS += -DBOOTLOADER_SIZE=4096
-
 
 # Build Options
 #   change yes to no to disable

keyboards/bpiphany/kitten_paw/rules.mk

@@ -1,51 +1,15 @@
 # MCU name
 MCU = atmega32u2
 
-# Processor frequency.
+# Bootloader selection
-#     This will define a symbol, F_CPU, in all source code files equal to the
+#   Teensy       halfkay
-#     processor frequency in Hz. You can then use this symbol in your source code to
+#   Pro Micro    caterina
-#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+#   Atmel DFU    atmel-dfu
-#     automatically to create a 32-bit value in your source code.
+#   LUFA DFU     lufa-dfu
-#
+#   QMK DFU      qmk-dfu
-#     This will be an integer division of F_USB below, as it is sourced by
+#   ATmega32A    bootloadHID
-#     F_USB after it has run through any CPU prescalers. Note that this value
+#   ATmega328P   USBasp
-#     does not *change* the processor frequency - it should merely be updated to
+BOOTLOADER = atmel-dfu
-#     reflect the processor speed set externally so that the code can use accurate
-#     software delays.
-F_CPU = 16000000
-
-
-#
-# LUFA specific
-#
-# Target architecture (see library "Board Types" documentation).
-ARCH = AVR8
-
-# Input clock frequency.
-#     This will define a symbol, F_USB, in all source code files equal to the
-#     input clock frequency (before any prescaling is performed) in Hz. This value may
-#     differ from F_CPU if prescaling is used on the latter, and is required as the
-#     raw input clock is fed directly to the PLL sections of the AVR for high speed
-#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
-#     at the end, this will be done automatically to create a 32-bit value in your
-#     source code.
-#
-#     If no clock division is performed on the input clock inside the AVR (via the
-#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
-F_USB = $(F_CPU)
-
-# Interrupt driven control endpoint task(+60)
-OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
-
-
-# Boot Section Size in *bytes*
-#   Teensy halfKay   512
-#   Teensy++ halfKay 1024
-#   Atmel DFU loader 4096
-#   LUFA bootloader  4096
-#   USBaspLoader     2048
-	OPT_DEFS += -DBOOTLOADER_SIZE=4096
-
 
 # Build Options
 #   change yes to no to disable

keyboards/bpiphany/pegasushoof/rules.mk

@@ -1,42 +1,15 @@
 # MCU name
 MCU = atmega32u2
 
-# Processor frequency.
+# Bootloader selection
-#     This will define a symbol, F_CPU, in all source code files equal to the
+#   Teensy       halfkay
-#     processor frequency in Hz. You can then use this symbol in your source code to
+#   Pro Micro    caterina
-#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+#   Atmel DFU    atmel-dfu
-#     automatically to create a 32-bit value in your source code.
+#   LUFA DFU     lufa-dfu
-#
+#   QMK DFU      qmk-dfu
-#     This will be an integer division of F_USB below, as it is sourced by
+#   ATmega32A    bootloadHID
-#     F_USB after it has run through any CPU prescalers. Note that this value
+#   ATmega328P   USBasp
-#     does not *change* the processor frequency - it should merely be updated to
+BOOTLOADER = atmel-dfu
-#     reflect the processor speed set externally so that the code can use accurate
-#     software delays.
-F_CPU = 16000000
-
-#
-# LUFA specific
-#
-# Target architecture (see library "Board Types" documentation).
-ARCH = AVR8
-
-# Input clock frequency.
-#     This will define a symbol, F_USB, in all source code files equal to the
-#     input clock frequency (before any prescaling is performed) in Hz. This value may
-#     differ from F_CPU if prescaling is used on the latter, and is required as the
-#     raw input clock is fed directly to the PLL sections of the AVR for high speed
-#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
-#     at the end, this will be done automatically to create a 32-bit value in your
-#     source code.
-#
-#     If no clock division is performed on the input clock inside the AVR (via the
-#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
-F_USB = $(F_CPU)
-
-# Interrupt driven control endpoint task(+60)
-OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
-
-BOOTLOADER=atmel-dfu
 
 # Build Options
 #   change yes to no to disable

keyboards/bpiphany/tiger_lily/rules.mk

@@ -1,51 +1,15 @@
 # MCU name
 MCU = atmega32u2
 
-# Processor frequency.
+# Bootloader selection
-#     This will define a symbol, F_CPU, in all source code files equal to the
+#   Teensy       halfkay
-#     processor frequency in Hz. You can then use this symbol in your source code to
+#   Pro Micro    caterina
-#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+#   Atmel DFU    atmel-dfu
-#     automatically to create a 32-bit value in your source code.
+#   LUFA DFU     lufa-dfu
-#
+#   QMK DFU      qmk-dfu
-#     This will be an integer division of F_USB below, as it is sourced by
+#   ATmega32A    bootloadHID
-#     F_USB after it has run through any CPU prescalers. Note that this value
+#   ATmega328P   USBasp
-#     does not *change* the processor frequency - it should merely be updated to
+BOOTLOADER = atmel-dfu
-#     reflect the processor speed set externally so that the code can use accurate
-#     software delays.
-F_CPU = 16000000
-
-
-#
-# LUFA specific
-#
-# Target architecture (see library "Board Types" documentation).
-ARCH = AVR8
-
-# Input clock frequency.
-#     This will define a symbol, F_USB, in all source code files equal to the
-#     input clock frequency (before any prescaling is performed) in Hz. This value may
-#     differ from F_CPU if prescaling is used on the latter, and is required as the
-#     raw input clock is fed directly to the PLL sections of the AVR for high speed
-#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
-#     at the end, this will be done automatically to create a 32-bit value in your
-#     source code.
-#
-#     If no clock division is performed on the input clock inside the AVR (via the
-#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
-F_USB = $(F_CPU)
-
-# Interrupt driven control endpoint task(+60)
-OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
-
-
-# Boot Section Size in *bytes*
-#   Teensy halfKay   512
-#   Teensy++ halfKay 1024
-#   Atmel DFU loader 4096
-#   LUFA bootloader  4096
-#   USBaspLoader     2048
-OPT_DEFS += -DBOOTLOADER_SIZE=4096
-
 
 # Build Options
 #   change yes to no to disable

keyboards/bpiphany/unloved_bastard/rules.mk

@@ -1,51 +1,15 @@
 # MCU name
 MCU = atmega32u2
 
-# Processor frequency.
+# Bootloader selection
-#     This will define a symbol, F_CPU, in all source code files equal to the
+#   Teensy       halfkay
-#     processor frequency in Hz. You can then use this symbol in your source code to
+#   Pro Micro    caterina
-#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+#   Atmel DFU    atmel-dfu
-#     automatically to create a 32-bit value in your source code.
+#   LUFA DFU     lufa-dfu
-#
+#   QMK DFU      qmk-dfu
-#     This will be an integer division of F_USB below, as it is sourced by
+#   ATmega32A    bootloadHID
-#     F_USB after it has run through any CPU prescalers. Note that this value
+#   ATmega328P   USBasp
-#     does not *change* the processor frequency - it should merely be updated to
+BOOTLOADER = atmel-dfu
-#     reflect the processor speed set externally so that the code can use accurate
-#     software delays.
-F_CPU = 16000000
-
-
-#
-# LUFA specific
-#
-# Target architecture (see library "Board Types" documentation).
-ARCH = AVR8
-
-# Input clock frequency.
-#     This will define a symbol, F_USB, in all source code files equal to the
-#     input clock frequency (before any prescaling is performed) in Hz. This value may
-#     differ from F_CPU if prescaling is used on the latter, and is required as the
-#     raw input clock is fed directly to the PLL sections of the AVR for high speed
-#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
-#     at the end, this will be done automatically to create a 32-bit value in your
-#     source code.
-#
-#     If no clock division is performed on the input clock inside the AVR (via the
-#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
-F_USB = $(F_CPU)
-
-# Interrupt driven control endpoint task(+60)
-OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
-
-
-# Boot Section Size in *bytes*
-#   Teensy halfKay   512
-#   Teensy++ halfKay 1024
-#   Atmel DFU loader 4096
-#   LUFA bootloader  4096
-#   USBaspLoader     2048
-OPT_DEFS += -DBOOTLOADER_SIZE=4096
-
 
 # Build Options
 #   change yes to no to disable

keyboards/cannonkeys/chimera65/boards/ST_STM32F072B_DISCOVERY/board.c

@@ -0,0 +1,109 @@
+/*
+    ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+/*
+ * This file has been automatically generated using ChibiStudio board
+ * generator plugin. Do not edit manually.
+ */
+
+#include "hal.h"
+
+#if HAL_USE_PAL || defined(__DOXYGEN__)
+/**
+ * @brief   PAL setup.
+ * @details Digital I/O ports static configuration as defined in @p board.h.
+ *          This variable is used by the HAL when initializing the PAL driver.
+ */
+const PALConfig pal_default_config = {
+#if STM32_HAS_GPIOA
+  {VAL_GPIOA_MODER, VAL_GPIOA_OTYPER, VAL_GPIOA_OSPEEDR, VAL_GPIOA_PUPDR,
+   VAL_GPIOA_ODR,   VAL_GPIOA_AFRL,   VAL_GPIOA_AFRH},
+#endif
+#if STM32_HAS_GPIOB
+  {VAL_GPIOB_MODER, VAL_GPIOB_OTYPER, VAL_GPIOB_OSPEEDR, VAL_GPIOB_PUPDR,
+   VAL_GPIOB_ODR,   VAL_GPIOB_AFRL,   VAL_GPIOB_AFRH},
+#endif
+#if STM32_HAS_GPIOC
+  {VAL_GPIOC_MODER, VAL_GPIOC_OTYPER, VAL_GPIOC_OSPEEDR, VAL_GPIOC_PUPDR,
+   VAL_GPIOC_ODR,   VAL_GPIOC_AFRL,   VAL_GPIOC_AFRH},
+#endif
+#if STM32_HAS_GPIOD
+  {VAL_GPIOD_MODER, VAL_GPIOD_OTYPER, VAL_GPIOD_OSPEEDR, VAL_GPIOD_PUPDR,
+   VAL_GPIOD_ODR,   VAL_GPIOD_AFRL,   VAL_GPIOD_AFRH},
+#endif
+#if STM32_HAS_GPIOE
+  {VAL_GPIOE_MODER, VAL_GPIOE_OTYPER, VAL_GPIOE_OSPEEDR, VAL_GPIOE_PUPDR,
+   VAL_GPIOE_ODR,   VAL_GPIOE_AFRL,   VAL_GPIOE_AFRH},
+#endif
+#if STM32_HAS_GPIOF
+  {VAL_GPIOF_MODER, VAL_GPIOF_OTYPER, VAL_GPIOF_OSPEEDR, VAL_GPIOF_PUPDR,
+   VAL_GPIOF_ODR,   VAL_GPIOF_AFRL,   VAL_GPIOF_AFRH},
+#endif
+#if STM32_HAS_GPIOG
+  {VAL_GPIOG_MODER, VAL_GPIOG_OTYPER, VAL_GPIOG_OSPEEDR, VAL_GPIOG_PUPDR,
+   VAL_GPIOG_ODR,   VAL_GPIOG_AFRL,   VAL_GPIOG_AFRH},
+#endif
+#if STM32_HAS_GPIOH
+  {VAL_GPIOH_MODER, VAL_GPIOH_OTYPER, VAL_GPIOH_OSPEEDR, VAL_GPIOH_PUPDR,
+   VAL_GPIOH_ODR,   VAL_GPIOH_AFRL,   VAL_GPIOH_AFRH},
+#endif
+#if STM32_HAS_GPIOI
+  {VAL_GPIOI_MODER, VAL_GPIOI_OTYPER, VAL_GPIOI_OSPEEDR, VAL_GPIOI_PUPDR,
+   VAL_GPIOI_ODR,   VAL_GPIOI_AFRL,   VAL_GPIOI_AFRH}
+#endif
+};
+#endif
+
+void enter_bootloader_mode_if_requested(void);
+
+/**
+ * @brief   Early initialization code.
+ * @details This initialization must be performed just after stack setup
+ *          and before any other initialization.
+ */
+void __early_init(void) {
+  enter_bootloader_mode_if_requested();
+  stm32_clock_init();
+}
+
+#if HAL_USE_MMC_SPI || defined(__DOXYGEN__)
+/**
+ * @brief   MMC_SPI card detection.
+ */
+bool mmc_lld_is_card_inserted(MMCDriver *mmcp) {
+
+  (void)mmcp;
+  /* TODO: Fill the implementation.*/
+  return true;
+}
+
+/**
+ * @brief   MMC_SPI card write protection detection.
+ */
+bool mmc_lld_is_write_protected(MMCDriver *mmcp) {
+
+  (void)mmcp;
+  /* TODO: Fill the implementation.*/
+  return false;
+}
+#endif
+
+/**
+ * @brief   Board-specific initialization code.
+ * @todo    Add your board-specific code, if any.
+ */
+void boardInit(void) {
+}

keyboards/cannonkeys/chimera65/boards/ST_STM32F072B_DISCOVERY/board.h

@@ -0,0 +1,922 @@
+/*
+    ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+/*
+ * This file has been automatically generated using ChibiStudio board
+ * generator plugin. Do not edit manually.
+ */
+
+#ifndef BOARD_H
+#define BOARD_H
+
+/*
+ * Setup for ST STM32F072B-Discovery board.
+ */
+
+/*
+ * Board identifier.
+ */
+#define BOARD_ST_STM32F072B_DISCOVERY
+#define BOARD_NAME                  "ST STM32F072B-Discovery"
+
+/*
+ * Board oscillators-related settings.
+ * NOTE: HSE not fitted.
+ */
+#if !defined(STM32_LSECLK)
+#define STM32_LSECLK                32768
+#endif
+
+#define STM32_LSEDRV                (3U << 3U)
+
+#if !defined(STM32_HSECLK)
+#define STM32_HSECLK                0U
+#endif
+
+#define STM32_HSE_BYPASS
+
+/*
+ * MCU type as defined in the ST header.
+ */
+#define STM32F072xB
+
+/*
+ * IO pins assignments.
+ */
+#define GPIOA_BUTTON                0U
+#define GPIOA_PIN1                  1U
+#define GPIOA_PIN2                  2U
+#define GPIOA_PIN3                  3U
+#define GPIOA_PIN4                  4U
+#define GPIOA_PIN5                  5U
+#define GPIOA_PIN6                  6U
+#define GPIOA_PIN7                  7U
+#define GPIOA_PIN8                  8U
+#define GPIOA_PIN9                  9U
+#define GPIOA_PIN10                 10U
+#define GPIOA_USB_DM                11U
+#define GPIOA_USB_DP                12U
+#define GPIOA_SWDIO                 13U
+#define GPIOA_SWCLK                 14U
+#define GPIOA_PIN15                 15U
+
+#define GPIOB_PIN0                  0U
+#define GPIOB_PIN1                  1U
+#define GPIOB_PIN2                  2U
+#define GPIOB_PIN3                  3U
+#define GPIOB_PIN4                  4U
+#define GPIOB_PIN5                  5U
+#define GPIOB_PIN6                  6U
+#define GPIOB_PIN7                  7U
+#define GPIOB_PIN8                  8U
+#define GPIOB_PIN9                  9U
+#define GPIOB_PIN10                 10U
+#define GPIOB_PIN11                 11U
+#define GPIOB_PIN12                 12U
+#define GPIOB_SPI2_SCK              13U
+#define GPIOB_SPI2_MISO             14U
+#define GPIOB_SPI2_MOSI             15U
+
+#define GPIOC_MEMS_CS               0U
+#define GPIOC_PIN1                  1U
+#define GPIOC_PIN2                  2U
+#define GPIOC_PIN3                  3U
+#define GPIOC_PIN4                  4U
+#define GPIOC_PIN5                  5U
+#define GPIOC_LED_RED               6U
+#define GPIOC_LED_BLUE              7U
+#define GPIOC_LED_ORANGE            8U
+#define GPIOC_LED_GREEN             9U
+#define GPIOC_PIN10                 10U
+#define GPIOC_PIN11                 11U
+#define GPIOC_PIN12                 12U
+#define GPIOC_PIN13                 13U
+#define GPIOC_OSC32_IN              14U
+#define GPIOC_OSC32_OUT             15U
+
+#define GPIOD_PIN0                  0U
+#define GPIOD_PIN1                  1U
+#define GPIOD_PIN2                  2U
+#define GPIOD_PIN3                  3U
+#define GPIOD_PIN4                  4U
+#define GPIOD_PIN5                  5U
+#define GPIOD_PIN6                  6U
+#define GPIOD_PIN7                  7U
+#define GPIOD_PIN8                  8U
+#define GPIOD_PIN9                  9U
+#define GPIOD_PIN10                 10U
+#define GPIOD_PIN11                 11U
+#define GPIOD_PIN12                 12U
+#define GPIOD_PIN13                 13U
+#define GPIOD_PIN14                 14U
+#define GPIOD_PIN15                 15U
+
+#define GPIOE_PIN0                  0U
+#define GPIOE_PIN1                  1U
+#define GPIOE_PIN2                  2U
+#define GPIOE_PIN3                  3U
+#define GPIOE_PIN4                  4U
+#define GPIOE_PIN5                  5U
+#define GPIOE_PIN6                  6U
+#define GPIOE_PIN7                  7U
+#define GPIOE_PIN8                  8U
+#define GPIOE_PIN9                  9U
+#define GPIOE_PIN10                 10U
+#define GPIOE_PIN11                 11U
+#define GPIOE_PIN12                 12U
+#define GPIOE_PIN13                 13U
+#define GPIOE_PIN14                 14U
+#define GPIOE_PIN15                 15U
+
+#define GPIOF_OSC_IN                0U
+#define GPIOF_OSC_OUT               1U
+#define GPIOF_PIN2                  2U
+#define GPIOF_PIN3                  3U
+#define GPIOF_PIN4                  4U
+#define GPIOF_PIN5                  5U
+#define GPIOF_PIN6                  6U
+#define GPIOF_PIN7                  7U
+#define GPIOF_PIN8                  8U
+#define GPIOF_PIN9                  9U
+#define GPIOF_PIN10                 10U
+#define GPIOF_PIN11                 11U
+#define GPIOF_PIN12                 12U
+#define GPIOF_PIN13                 13U
+#define GPIOF_PIN14                 14U
+#define GPIOF_PIN15                 15U
+
+/*
+ * IO lines assignments.
+ */
+#define LINE_BUTTON                 PAL_LINE(GPIOA, 0U)
+#define LINE_USB_DM                 PAL_LINE(GPIOA, 11U)
+#define LINE_USB_DP                 PAL_LINE(GPIOA, 12U)
+#define LINE_SWDIO                  PAL_LINE(GPIOA, 13U)
+#define LINE_SWCLK                  PAL_LINE(GPIOA, 14U)
+
+#define LINE_SPI2_SCK               PAL_LINE(GPIOB, 13U)
+#define LINE_SPI2_MISO              PAL_LINE(GPIOB, 14U)
+#define LINE_SPI2_MOSI              PAL_LINE(GPIOB, 15U)
+
+#define LINE_MEMS_CS                PAL_LINE(GPIOC, 0U)
+#define LINE_LED_RED                PAL_LINE(GPIOC, 6U)
+#define LINE_LED_BLUE               PAL_LINE(GPIOC, 7U)
+#define LINE_LED_ORANGE             PAL_LINE(GPIOC, 8U)
+#define LINE_LED_GREEN              PAL_LINE(GPIOC, 9U)
+#define LINE_OSC32_IN               PAL_LINE(GPIOC, 14U)
+#define LINE_OSC32_OUT              PAL_LINE(GPIOC, 15U)
+
+
+
+#define LINE_OSC_IN                 PAL_LINE(GPIOF, 0U)
+#define LINE_OSC_OUT                PAL_LINE(GPIOF, 1U)
+
+/*
+ * I/O ports initial setup, this configuration is established soon after reset
+ * in the initialization code.
+ * Please refer to the STM32 Reference Manual for details.
+ */
+#define PIN_MODE_INPUT(n)           (0U << ((n) * 2U))
+#define PIN_MODE_OUTPUT(n)          (1U << ((n) * 2U))
+#define PIN_MODE_ALTERNATE(n)       (2U << ((n) * 2U))
+#define PIN_MODE_ANALOG(n)          (3U << ((n) * 2U))
+#define PIN_ODR_LOW(n)              (0U << (n))
+#define PIN_ODR_HIGH(n)             (1U << (n))
+#define PIN_OTYPE_PUSHPULL(n)       (0U << (n))
+#define PIN_OTYPE_OPENDRAIN(n)      (1U << (n))
+#define PIN_OSPEED_VERYLOW(n)       (0U << ((n) * 2U))
+#define PIN_OSPEED_LOW(n)           (1U << ((n) * 2U))
+#define PIN_OSPEED_MEDIUM(n)        (2U << ((n) * 2U))
+#define PIN_OSPEED_HIGH(n)          (3U << ((n) * 2U))
+#define PIN_PUPDR_FLOATING(n)       (0U << ((n) * 2U))
+#define PIN_PUPDR_PULLUP(n)         (1U << ((n) * 2U))
+#define PIN_PUPDR_PULLDOWN(n)       (2U << ((n) * 2U))
+#define PIN_AFIO_AF(n, v)           ((v) << (((n) % 8U) * 4U))
+
+/*
+ * GPIOA setup:
+ *
+ * PA0  - BUTTON                    (input floating).
+ * PA1  - PIN1                      (input pullup).
+ * PA2  - PIN2                      (input pullup).
+ * PA3  - PIN3                      (input pullup).
+ * PA4  - PIN4                      (input pullup).
+ * PA5  - PIN5                      (input pullup).
+ * PA6  - PIN6                      (input pullup).
+ * PA7  - PIN7                      (input pullup).
+ * PA8  - PIN8                      (input pullup).
+ * PA9  - PIN9                      (input pullup).
+ * PA10 - PIN10                     (input pullup).
+ * PA11 - USB_DM                    (input floating).
+ * PA12 - USB_DP                    (input floating).
+ * PA13 - SWDIO                     (alternate 0).
+ * PA14 - SWCLK                     (alternate 0).
+ * PA15 - PIN15                     (input pullup).
+ */
+#define VAL_GPIOA_MODER             (PIN_MODE_INPUT(GPIOA_BUTTON) |         \
+                                     PIN_MODE_INPUT(GPIOA_PIN1) |           \
+                                     PIN_MODE_INPUT(GPIOA_PIN2) |           \
+                                     PIN_MODE_INPUT(GPIOA_PIN3) |           \
+                                     PIN_MODE_INPUT(GPIOA_PIN4) |           \
+                                     PIN_MODE_INPUT(GPIOA_PIN5) |           \
+                                     PIN_MODE_INPUT(GPIOA_PIN6) |           \
+                                     PIN_MODE_INPUT(GPIOA_PIN7) |           \
+                                     PIN_MODE_INPUT(GPIOA_PIN8) |           \
+                                     PIN_MODE_INPUT(GPIOA_PIN9) |           \
+                                     PIN_MODE_INPUT(GPIOA_PIN10) |          \
+                                     PIN_MODE_INPUT(GPIOA_USB_DM) |         \
+                                     PIN_MODE_INPUT(GPIOA_USB_DP) |         \
+                                     PIN_MODE_ALTERNATE(GPIOA_SWDIO) |      \
+                                     PIN_MODE_ALTERNATE(GPIOA_SWCLK) |      \
+                                     PIN_MODE_INPUT(GPIOA_PIN15))
+#define VAL_GPIOA_OTYPER            (PIN_OTYPE_PUSHPULL(GPIOA_BUTTON) |     \
+                                     PIN_OTYPE_PUSHPULL(GPIOA_PIN1) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOA_PIN2) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOA_PIN3) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOA_PIN4) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOA_PIN5) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOA_PIN6) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOA_PIN7) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOA_PIN8) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOA_PIN9) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOA_PIN10) |      \
+                                     PIN_OTYPE_PUSHPULL(GPIOA_USB_DM) |     \
+                                     PIN_OTYPE_PUSHPULL(GPIOA_USB_DP) |     \
+                                     PIN_OTYPE_PUSHPULL(GPIOA_SWDIO) |      \
+                                     PIN_OTYPE_PUSHPULL(GPIOA_SWCLK) |      \
+                                     PIN_OTYPE_PUSHPULL(GPIOA_PIN15))
+#define VAL_GPIOA_OSPEEDR           (PIN_OSPEED_VERYLOW(GPIOA_BUTTON) |     \
+                                     PIN_OSPEED_VERYLOW(GPIOA_PIN1) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOA_PIN2) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOA_PIN3) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOA_PIN4) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOA_PIN5) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOA_PIN6) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOA_PIN7) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOA_PIN8) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOA_PIN9) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOA_PIN10) |      \
+                                     PIN_OSPEED_VERYLOW(GPIOA_USB_DM) |     \
+                                     PIN_OSPEED_VERYLOW(GPIOA_USB_DP) |     \
+                                     PIN_OSPEED_HIGH(GPIOA_SWDIO) |         \
+                                     PIN_OSPEED_HIGH(GPIOA_SWCLK) |         \
+                                     PIN_OSPEED_HIGH(GPIOA_PIN15))
+#define VAL_GPIOA_PUPDR             (PIN_PUPDR_FLOATING(GPIOA_BUTTON) |     \
+                                     PIN_PUPDR_PULLUP(GPIOA_PIN1) |         \
+                                     PIN_PUPDR_PULLUP(GPIOA_PIN2) |         \
+                                     PIN_PUPDR_PULLUP(GPIOA_PIN3) |         \
+                                     PIN_PUPDR_PULLUP(GPIOA_PIN4) |         \
+                                     PIN_PUPDR_PULLUP(GPIOA_PIN5) |         \
+                                     PIN_PUPDR_PULLUP(GPIOA_PIN6) |         \
+                                     PIN_PUPDR_PULLUP(GPIOA_PIN7) |         \
+                                     PIN_PUPDR_PULLUP(GPIOA_PIN8) |         \
+                                     PIN_PUPDR_PULLUP(GPIOA_PIN9) |         \
+                                     PIN_PUPDR_PULLUP(GPIOA_PIN10) |        \
+                                     PIN_PUPDR_FLOATING(GPIOA_USB_DM) |     \
+                                     PIN_PUPDR_FLOATING(GPIOA_USB_DP) |     \
+                                     PIN_PUPDR_PULLUP(GPIOA_SWDIO) |        \
+                                     PIN_PUPDR_PULLDOWN(GPIOA_SWCLK) |      \
+                                     PIN_PUPDR_PULLUP(GPIOA_PIN15))
+#define VAL_GPIOA_ODR               (PIN_ODR_HIGH(GPIOA_BUTTON) |           \
+                                     PIN_ODR_HIGH(GPIOA_PIN1) |             \
+                                     PIN_ODR_HIGH(GPIOA_PIN2) |             \
+                                     PIN_ODR_HIGH(GPIOA_PIN3) |             \
+                                     PIN_ODR_HIGH(GPIOA_PIN4) |             \
+                                     PIN_ODR_HIGH(GPIOA_PIN5) |             \
+                                     PIN_ODR_HIGH(GPIOA_PIN6) |             \
+                                     PIN_ODR_HIGH(GPIOA_PIN7) |             \
+                                     PIN_ODR_HIGH(GPIOA_PIN8) |             \
+                                     PIN_ODR_HIGH(GPIOA_PIN9) |             \
+                                     PIN_ODR_HIGH(GPIOA_PIN10) |            \
+                                     PIN_ODR_HIGH(GPIOA_USB_DM) |           \
+                                     PIN_ODR_HIGH(GPIOA_USB_DP) |           \
+                                     PIN_ODR_HIGH(GPIOA_SWDIO) |            \
+                                     PIN_ODR_HIGH(GPIOA_SWCLK) |            \
+                                     PIN_ODR_HIGH(GPIOA_PIN15))
+#define VAL_GPIOA_AFRL              (PIN_AFIO_AF(GPIOA_BUTTON, 0U) |        \
+                                     PIN_AFIO_AF(GPIOA_PIN1, 0U) |          \
+                                     PIN_AFIO_AF(GPIOA_PIN2, 0U) |          \
+                                     PIN_AFIO_AF(GPIOA_PIN3, 0U) |          \
+                                     PIN_AFIO_AF(GPIOA_PIN4, 0U) |          \
+                                     PIN_AFIO_AF(GPIOA_PIN5, 0U) |          \
+                                     PIN_AFIO_AF(GPIOA_PIN6, 0U) |          \
+                                     PIN_AFIO_AF(GPIOA_PIN7, 0U))
+#define VAL_GPIOA_AFRH              (PIN_AFIO_AF(GPIOA_PIN8, 0U) |          \
+                                     PIN_AFIO_AF(GPIOA_PIN9, 0U) |          \
+                                     PIN_AFIO_AF(GPIOA_PIN10, 0U) |         \
+                                     PIN_AFIO_AF(GPIOA_USB_DM, 0U) |        \
+                                     PIN_AFIO_AF(GPIOA_USB_DP, 0U) |        \
+                                     PIN_AFIO_AF(GPIOA_SWDIO, 0U) |         \
+                                     PIN_AFIO_AF(GPIOA_SWCLK, 0U) |         \
+                                     PIN_AFIO_AF(GPIOA_PIN15, 0U))
+
+/*
+ * GPIOB setup:
+ *
+ * PB0  - PIN0                      (input pullup).
+ * PB1  - PIN1                      (input pullup).
+ * PB2  - PIN2                      (input pullup).
+ * PB3  - PIN3                      (input pullup).
+ * PB4  - PIN4                      (input pullup).
+ * PB5  - PIN5                      (input pullup).
+ * PB6  - PIN6                      (input pullup).
+ * PB7  - PIN7                      (input pullup).
+ * PB8  - PIN8                      (input pullup).
+ * PB9  - PIN9                      (input pullup).
+ * PB10 - PIN10                     (input pullup).
+ * PB11 - PIN11                     (input pullup).
+ * PB12 - PIN12                     (input pullup).
+ * PB13 - SPI2_SCK                  (alternate 0).
+ * PB14 - SPI2_MISO                 (alternate 0).
+ * PB15 - SPI2_MOSI                 (alternate 0).
+ */
+#define VAL_GPIOB_MODER             (PIN_MODE_INPUT(GPIOB_PIN0) |           \
+                                     PIN_MODE_INPUT(GPIOB_PIN1) |           \
+                                     PIN_MODE_INPUT(GPIOB_PIN2) |           \
+                                     PIN_MODE_INPUT(GPIOB_PIN3) |           \
+                                     PIN_MODE_INPUT(GPIOB_PIN4) |           \
+                                     PIN_MODE_INPUT(GPIOB_PIN5) |           \
+                                     PIN_MODE_INPUT(GPIOB_PIN6) |           \
+                                     PIN_MODE_INPUT(GPIOB_PIN7) |           \
+                                     PIN_MODE_INPUT(GPIOB_PIN8) |           \
+                                     PIN_MODE_INPUT(GPIOB_PIN9) |           \
+                                     PIN_MODE_INPUT(GPIOB_PIN10) |          \
+                                     PIN_MODE_INPUT(GPIOB_PIN11) |          \
+                                     PIN_MODE_INPUT(GPIOB_PIN12) |          \
+                                     PIN_MODE_ALTERNATE(GPIOB_SPI2_SCK) |   \
+                                     PIN_MODE_ALTERNATE(GPIOB_SPI2_MISO) |  \
+                                     PIN_MODE_ALTERNATE(GPIOB_SPI2_MOSI))
+#define VAL_GPIOB_OTYPER            (PIN_OTYPE_PUSHPULL(GPIOB_PIN0) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOB_PIN1) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOB_PIN2) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOB_PIN3) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOB_PIN4) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOB_PIN5) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOB_PIN6) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOB_PIN7) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOB_PIN8) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOB_PIN9) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOB_PIN10) |      \
+                                     PIN_OTYPE_PUSHPULL(GPIOB_PIN11) |      \
+                                     PIN_OTYPE_PUSHPULL(GPIOB_PIN12) |      \
+                                     PIN_OTYPE_PUSHPULL(GPIOB_SPI2_SCK) |   \
+                                     PIN_OTYPE_PUSHPULL(GPIOB_SPI2_MISO) |  \
+                                     PIN_OTYPE_PUSHPULL(GPIOB_SPI2_MOSI))
+#define VAL_GPIOB_OSPEEDR           (PIN_OSPEED_VERYLOW(GPIOB_PIN0) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOB_PIN1) |       \
+                                     PIN_OSPEED_HIGH(GPIOB_PIN2) |          \
+                                     PIN_OSPEED_HIGH(GPIOB_PIN3) |          \
+                                     PIN_OSPEED_HIGH(GPIOB_PIN4) |          \
+                                     PIN_OSPEED_VERYLOW(GPIOB_PIN5) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOB_PIN6) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOB_PIN7) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOB_PIN8) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOB_PIN9) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOB_PIN10) |      \
+                                     PIN_OSPEED_VERYLOW(GPIOB_PIN11) |      \
+                                     PIN_OSPEED_VERYLOW(GPIOB_PIN12) |      \
+                                     PIN_OSPEED_VERYLOW(GPIOB_SPI2_SCK) |   \
+                                     PIN_OSPEED_VERYLOW(GPIOB_SPI2_MISO) |  \
+                                     PIN_OSPEED_VERYLOW(GPIOB_SPI2_MOSI))
+#define VAL_GPIOB_PUPDR             (PIN_PUPDR_PULLUP(GPIOB_PIN0) |         \
+                                     PIN_PUPDR_PULLUP(GPIOB_PIN1) |         \
+                                     PIN_PUPDR_PULLUP(GPIOB_PIN2) |         \
+                                     PIN_PUPDR_PULLUP(GPIOB_PIN3) |         \
+                                     PIN_PUPDR_PULLUP(GPIOB_PIN4) |         \
+                                     PIN_PUPDR_PULLUP(GPIOB_PIN5) |         \
+                                     PIN_PUPDR_PULLUP(GPIOB_PIN6) |         \
+                                     PIN_PUPDR_PULLUP(GPIOB_PIN7) |         \
+                                     PIN_PUPDR_PULLUP(GPIOB_PIN8) |         \
+                                     PIN_PUPDR_PULLUP(GPIOB_PIN9) |         \
+                                     PIN_PUPDR_PULLUP(GPIOB_PIN10) |        \
+                                     PIN_PUPDR_PULLUP(GPIOB_PIN11) |        \
+                                     PIN_PUPDR_PULLUP(GPIOB_PIN12) |        \
+                                     PIN_PUPDR_FLOATING(GPIOB_SPI2_SCK) |   \
+                                     PIN_PUPDR_FLOATING(GPIOB_SPI2_MISO) |  \
+                                     PIN_PUPDR_FLOATING(GPIOB_SPI2_MOSI))
+#define VAL_GPIOB_ODR               (PIN_ODR_HIGH(GPIOB_PIN0) |             \
+                                     PIN_ODR_HIGH(GPIOB_PIN1) |             \
+                                     PIN_ODR_HIGH(GPIOB_PIN2) |             \
+                                     PIN_ODR_HIGH(GPIOB_PIN3) |             \
+                                     PIN_ODR_HIGH(GPIOB_PIN4) |             \
+                                     PIN_ODR_HIGH(GPIOB_PIN5) |             \
+                                     PIN_ODR_HIGH(GPIOB_PIN6) |             \
+                                     PIN_ODR_HIGH(GPIOB_PIN7) |             \
+                                     PIN_ODR_HIGH(GPIOB_PIN8) |             \
+                                     PIN_ODR_HIGH(GPIOB_PIN9) |             \
+                                     PIN_ODR_HIGH(GPIOB_PIN10) |            \
+                                     PIN_ODR_HIGH(GPIOB_PIN11) |            \
+                                     PIN_ODR_HIGH(GPIOB_PIN12) |            \
+                                     PIN_ODR_HIGH(GPIOB_SPI2_SCK) |         \
+                                     PIN_ODR_HIGH(GPIOB_SPI2_MISO) |        \
+                                     PIN_ODR_HIGH(GPIOB_SPI2_MOSI))
+#define VAL_GPIOB_AFRL              (PIN_AFIO_AF(GPIOB_PIN0, 0U) |          \
+                                     PIN_AFIO_AF(GPIOB_PIN1, 0U) |          \
+                                     PIN_AFIO_AF(GPIOB_PIN2, 0U) |          \
+                                     PIN_AFIO_AF(GPIOB_PIN3, 0U) |          \
+                                     PIN_AFIO_AF(GPIOB_PIN4, 0U) |          \
+                                     PIN_AFIO_AF(GPIOB_PIN5, 0U) |          \
+                                     PIN_AFIO_AF(GPIOB_PIN6, 0U) |          \
+                                     PIN_AFIO_AF(GPIOB_PIN7, 0U))
+#define VAL_GPIOB_AFRH              (PIN_AFIO_AF(GPIOB_PIN8, 0U) |          \
+                                     PIN_AFIO_AF(GPIOB_PIN9, 0U) |          \
+                                     PIN_AFIO_AF(GPIOB_PIN10, 0U) |         \
+                                     PIN_AFIO_AF(GPIOB_PIN11, 0U) |         \
+                                     PIN_AFIO_AF(GPIOB_PIN12, 0U) |         \
+                                     PIN_AFIO_AF(GPIOB_SPI2_SCK, 0U) |      \
+                                     PIN_AFIO_AF(GPIOB_SPI2_MISO, 0U) |     \
+                                     PIN_AFIO_AF(GPIOB_SPI2_MOSI, 0U))
+
+/*
+ * GPIOC setup:
+ *
+ * PC0  - MEMS_CS                   (output pushpull maximum).
+ * PC1  - PIN1                      (input pullup).
+ * PC2  - PIN2                      (input pullup).
+ * PC3  - PIN3                      (input pullup).
+ * PC4  - PIN4                      (input pullup).
+ * PC5  - PIN5                      (input pullup).
+ * PC6  - LED_RED                   (output pushpull maximum).
+ * PC7  - LED_BLUE                  (output pushpull maximum).
+ * PC8  - LED_ORANGE                (output pushpull maximum).
+ * PC9  - LED_GREEN                 (output pushpull maximum).
+ * PC10 - PIN10                     (input pullup).
+ * PC11 - PIN11                     (input pullup).
+ * PC12 - PIN12                     (input pullup).
+ * PC13 - PIN13                     (input pullup).
+ * PC14 - OSC32_IN                  (input floating).
+ * PC15 - OSC32_OUT                 (input floating).
+ */
+#define VAL_GPIOC_MODER             (PIN_MODE_OUTPUT(GPIOC_MEMS_CS) |       \
+                                     PIN_MODE_INPUT(GPIOC_PIN1) |           \
+                                     PIN_MODE_INPUT(GPIOC_PIN2) |           \
+                                     PIN_MODE_INPUT(GPIOC_PIN3) |           \
+                                     PIN_MODE_INPUT(GPIOC_PIN4) |           \
+                                     PIN_MODE_INPUT(GPIOC_PIN5) |           \
+                                     PIN_MODE_OUTPUT(GPIOC_LED_RED) |       \
+                                     PIN_MODE_OUTPUT(GPIOC_LED_BLUE) |      \
+                                     PIN_MODE_OUTPUT(GPIOC_LED_ORANGE) |    \
+                                     PIN_MODE_OUTPUT(GPIOC_LED_GREEN) |     \
+                                     PIN_MODE_INPUT(GPIOC_PIN10) |          \
+                                     PIN_MODE_INPUT(GPIOC_PIN11) |          \
+                                     PIN_MODE_INPUT(GPIOC_PIN12) |          \
+                                     PIN_MODE_INPUT(GPIOC_PIN13) |          \
+                                     PIN_MODE_INPUT(GPIOC_OSC32_IN) |       \
+                                     PIN_MODE_INPUT(GPIOC_OSC32_OUT))
+#define VAL_GPIOC_OTYPER            (PIN_OTYPE_PUSHPULL(GPIOC_MEMS_CS) |    \
+                                     PIN_OTYPE_PUSHPULL(GPIOC_PIN1) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOC_PIN2) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOC_PIN3) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOC_PIN4) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOC_PIN5) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOC_LED_RED) |    \
+                                     PIN_OTYPE_PUSHPULL(GPIOC_LED_BLUE) |   \
+                                     PIN_OTYPE_PUSHPULL(GPIOC_LED_ORANGE) | \
+                                     PIN_OTYPE_PUSHPULL(GPIOC_LED_GREEN) |  \
+                                     PIN_OTYPE_PUSHPULL(GPIOC_PIN10) |      \
+                                     PIN_OTYPE_PUSHPULL(GPIOC_PIN11) |      \
+                                     PIN_OTYPE_PUSHPULL(GPIOC_PIN12) |      \
+                                     PIN_OTYPE_PUSHPULL(GPIOC_PIN13) |      \
+                                     PIN_OTYPE_PUSHPULL(GPIOC_OSC32_IN) |   \
+                                     PIN_OTYPE_PUSHPULL(GPIOC_OSC32_OUT))
+#define VAL_GPIOC_OSPEEDR           (PIN_OSPEED_HIGH(GPIOC_MEMS_CS) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOC_PIN1) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOC_PIN2) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOC_PIN3) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOC_PIN4) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOC_PIN5) |       \
+                                     PIN_OSPEED_HIGH(GPIOC_LED_RED) |       \
+                                     PIN_OSPEED_HIGH(GPIOC_LED_BLUE) |      \
+                                     PIN_OSPEED_HIGH(GPIOC_LED_ORANGE) |    \
+                                     PIN_OSPEED_HIGH(GPIOC_LED_GREEN) |     \
+                                     PIN_OSPEED_VERYLOW(GPIOC_PIN10) |      \
+                                     PIN_OSPEED_VERYLOW(GPIOC_PIN11) |      \
+                                     PIN_OSPEED_VERYLOW(GPIOC_PIN12) |      \
+                                     PIN_OSPEED_VERYLOW(GPIOC_PIN13) |      \
+                                     PIN_OSPEED_HIGH(GPIOC_OSC32_IN) |      \
+                                     PIN_OSPEED_HIGH(GPIOC_OSC32_OUT))
+#define VAL_GPIOC_PUPDR             (PIN_PUPDR_FLOATING(GPIOC_MEMS_CS) |    \
+                                     PIN_PUPDR_PULLUP(GPIOC_PIN1) |         \
+                                     PIN_PUPDR_PULLUP(GPIOC_PIN2) |         \
+                                     PIN_PUPDR_PULLUP(GPIOC_PIN3) |         \
+                                     PIN_PUPDR_PULLUP(GPIOC_PIN4) |         \
+                                     PIN_PUPDR_PULLUP(GPIOC_PIN5) |         \
+                                     PIN_PUPDR_FLOATING(GPIOC_LED_RED) |    \
+                                     PIN_PUPDR_FLOATING(GPIOC_LED_BLUE) |   \
+                                     PIN_PUPDR_FLOATING(GPIOC_LED_ORANGE) | \
+                                     PIN_PUPDR_FLOATING(GPIOC_LED_GREEN) |  \
+                                     PIN_PUPDR_PULLUP(GPIOC_PIN10) |        \
+                                     PIN_PUPDR_PULLUP(GPIOC_PIN11) |        \
+                                     PIN_PUPDR_PULLUP(GPIOC_PIN12) |        \
+                                     PIN_PUPDR_PULLUP(GPIOC_PIN13) |        \
+                                     PIN_PUPDR_FLOATING(GPIOC_OSC32_IN) |   \
+                                     PIN_PUPDR_FLOATING(GPIOC_OSC32_OUT))
+#define VAL_GPIOC_ODR               (PIN_ODR_HIGH(GPIOC_MEMS_CS) |          \
+                                     PIN_ODR_HIGH(GPIOC_PIN1) |             \
+                                     PIN_ODR_HIGH(GPIOC_PIN2) |             \
+                                     PIN_ODR_HIGH(GPIOC_PIN3) |             \
+                                     PIN_ODR_HIGH(GPIOC_PIN4) |             \
+                                     PIN_ODR_HIGH(GPIOC_PIN5) |             \
+                                     PIN_ODR_LOW(GPIOC_LED_RED) |           \
+                                     PIN_ODR_LOW(GPIOC_LED_BLUE) |          \
+                                     PIN_ODR_LOW(GPIOC_LED_ORANGE) |        \
+                                     PIN_ODR_LOW(GPIOC_LED_GREEN) |         \
+                                     PIN_ODR_HIGH(GPIOC_PIN10) |            \
+                                     PIN_ODR_HIGH(GPIOC_PIN11) |            \
+                                     PIN_ODR_HIGH(GPIOC_PIN12) |            \
+                                     PIN_ODR_HIGH(GPIOC_PIN13) |            \
+                                     PIN_ODR_HIGH(GPIOC_OSC32_IN) |         \
+                                     PIN_ODR_HIGH(GPIOC_OSC32_OUT))
+#define VAL_GPIOC_AFRL              (PIN_AFIO_AF(GPIOC_MEMS_CS, 0U) |       \
+                                     PIN_AFIO_AF(GPIOC_PIN1, 0U) |          \
+                                     PIN_AFIO_AF(GPIOC_PIN2, 0U) |          \
+                                     PIN_AFIO_AF(GPIOC_PIN3, 0U) |          \
+                                     PIN_AFIO_AF(GPIOC_PIN4, 0U) |          \
+                                     PIN_AFIO_AF(GPIOC_PIN5, 0U) |          \
+                                     PIN_AFIO_AF(GPIOC_LED_RED, 0U) |       \
+                                     PIN_AFIO_AF(GPIOC_LED_BLUE, 0U))
+#define VAL_GPIOC_AFRH              (PIN_AFIO_AF(GPIOC_LED_ORANGE, 0U) |    \
+                                     PIN_AFIO_AF(GPIOC_LED_GREEN, 0U) |     \
+                                     PIN_AFIO_AF(GPIOC_PIN10, 0U) |         \
+                                     PIN_AFIO_AF(GPIOC_PIN11, 0U) |         \
+                                     PIN_AFIO_AF(GPIOC_PIN12, 0U) |         \
+                                     PIN_AFIO_AF(GPIOC_PIN13, 0U) |         \
+                                     PIN_AFIO_AF(GPIOC_OSC32_IN, 0U) |      \
+                                     PIN_AFIO_AF(GPIOC_OSC32_OUT, 0U))
+
+/*
+ * GPIOD setup:
+ *
+ * PD0  - PIN0                      (input pullup).
+ * PD1  - PIN1                      (input pullup).
+ * PD2  - PIN2                      (input pullup).
+ * PD3  - PIN3                      (input pullup).
+ * PD4  - PIN4                      (input pullup).
+ * PD5  - PIN5                      (input pullup).
+ * PD6  - PIN6                      (input pullup).
+ * PD7  - PIN7                      (input pullup).
+ * PD8  - PIN8                      (input pullup).
+ * PD9  - PIN9                      (input pullup).
+ * PD10 - PIN10                     (input pullup).
+ * PD11 - PIN11                     (input pullup).
+ * PD12 - PIN12                     (input pullup).
+ * PD13 - PIN13                     (input pullup).
+ * PD14 - PIN14                     (input pullup).
+ * PD15 - PIN15                     (input pullup).
+ */
+#define VAL_GPIOD_MODER             (PIN_MODE_INPUT(GPIOD_PIN0) |           \
+                                     PIN_MODE_INPUT(GPIOD_PIN1) |           \
+                                     PIN_MODE_INPUT(GPIOD_PIN2) |           \
+                                     PIN_MODE_INPUT(GPIOD_PIN3) |           \
+                                     PIN_MODE_INPUT(GPIOD_PIN4) |           \
+                                     PIN_MODE_INPUT(GPIOD_PIN5) |           \
+                                     PIN_MODE_INPUT(GPIOD_PIN6) |           \
+                                     PIN_MODE_INPUT(GPIOD_PIN7) |           \
+                                     PIN_MODE_INPUT(GPIOD_PIN8) |           \
+                                     PIN_MODE_INPUT(GPIOD_PIN9) |           \
+                                     PIN_MODE_INPUT(GPIOD_PIN10) |          \
+                                     PIN_MODE_INPUT(GPIOD_PIN11) |          \
+                                     PIN_MODE_INPUT(GPIOD_PIN12) |          \
+                                     PIN_MODE_INPUT(GPIOD_PIN13) |          \
+                                     PIN_MODE_INPUT(GPIOD_PIN14) |          \
+                                     PIN_MODE_INPUT(GPIOD_PIN15))
+#define VAL_GPIOD_OTYPER            (PIN_OTYPE_PUSHPULL(GPIOD_PIN0) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOD_PIN1) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOD_PIN2) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOD_PIN3) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOD_PIN4) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOD_PIN5) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOD_PIN6) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOD_PIN7) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOD_PIN8) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOD_PIN9) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOD_PIN10) |      \
+                                     PIN_OTYPE_PUSHPULL(GPIOD_PIN11) |      \
+                                     PIN_OTYPE_PUSHPULL(GPIOD_PIN12) |      \
+                                     PIN_OTYPE_PUSHPULL(GPIOD_PIN13) |      \
+                                     PIN_OTYPE_PUSHPULL(GPIOD_PIN14) |      \
+                                     PIN_OTYPE_PUSHPULL(GPIOD_PIN15))
+#define VAL_GPIOD_OSPEEDR           (PIN_OSPEED_VERYLOW(GPIOD_PIN0) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOD_PIN1) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOD_PIN2) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOD_PIN3) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOD_PIN4) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOD_PIN5) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOD_PIN6) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOD_PIN7) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOD_PIN8) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOD_PIN9) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOD_PIN10) |      \
+                                     PIN_OSPEED_VERYLOW(GPIOD_PIN11) |      \
+                                     PIN_OSPEED_VERYLOW(GPIOD_PIN12) |      \
+                                     PIN_OSPEED_VERYLOW(GPIOD_PIN13) |      \
+                                     PIN_OSPEED_VERYLOW(GPIOD_PIN14) |      \
+                                     PIN_OSPEED_VERYLOW(GPIOD_PIN15))
+#define VAL_GPIOD_PUPDR             (PIN_PUPDR_PULLUP(GPIOD_PIN0) |         \
+                                     PIN_PUPDR_PULLUP(GPIOD_PIN1) |         \
+                                     PIN_PUPDR_PULLUP(GPIOD_PIN2) |         \
+                                     PIN_PUPDR_PULLUP(GPIOD_PIN3) |         \
+                                     PIN_PUPDR_PULLUP(GPIOD_PIN4) |         \
+                                     PIN_PUPDR_PULLUP(GPIOD_PIN5) |         \
+                                     PIN_PUPDR_PULLUP(GPIOD_PIN6) |         \
+                                     PIN_PUPDR_PULLUP(GPIOD_PIN7) |         \
+                                     PIN_PUPDR_PULLUP(GPIOD_PIN8) |         \
+                                     PIN_PUPDR_PULLUP(GPIOD_PIN9) |         \
+                                     PIN_PUPDR_PULLUP(GPIOD_PIN10) |        \
+                                     PIN_PUPDR_PULLUP(GPIOD_PIN11) |        \
+                                     PIN_PUPDR_PULLUP(GPIOD_PIN12) |        \
+                                     PIN_PUPDR_PULLUP(GPIOD_PIN13) |        \
+                                     PIN_PUPDR_PULLUP(GPIOD_PIN14) |        \
+                                     PIN_PUPDR_PULLUP(GPIOD_PIN15))
+#define VAL_GPIOD_ODR               (PIN_ODR_HIGH(GPIOD_PIN0) |             \
+                                     PIN_ODR_HIGH(GPIOD_PIN1) |             \
+                                     PIN_ODR_HIGH(GPIOD_PIN2) |             \
+                                     PIN_ODR_HIGH(GPIOD_PIN3) |             \
+                                     PIN_ODR_HIGH(GPIOD_PIN4) |             \
+                                     PIN_ODR_HIGH(GPIOD_PIN5) |             \
+                                     PIN_ODR_HIGH(GPIOD_PIN6) |             \
+                                     PIN_ODR_HIGH(GPIOD_PIN7) |             \
+                                     PIN_ODR_HIGH(GPIOD_PIN8) |             \
+                                     PIN_ODR_HIGH(GPIOD_PIN9) |             \
+                                     PIN_ODR_HIGH(GPIOD_PIN10) |            \
+                                     PIN_ODR_HIGH(GPIOD_PIN11) |            \
+                                     PIN_ODR_HIGH(GPIOD_PIN12) |            \
+                                     PIN_ODR_HIGH(GPIOD_PIN13) |            \
+                                     PIN_ODR_HIGH(GPIOD_PIN14) |            \
+                                     PIN_ODR_HIGH(GPIOD_PIN15))
+#define VAL_GPIOD_AFRL              (PIN_AFIO_AF(GPIOD_PIN0, 0U) |          \
+                                     PIN_AFIO_AF(GPIOD_PIN1, 0U) |          \
+                                     PIN_AFIO_AF(GPIOD_PIN2, 0U) |          \
+                                     PIN_AFIO_AF(GPIOD_PIN3, 0U) |          \
+                                     PIN_AFIO_AF(GPIOD_PIN4, 0U) |          \
+                                     PIN_AFIO_AF(GPIOD_PIN5, 0U) |          \
+                                     PIN_AFIO_AF(GPIOD_PIN6, 0U) |          \
+                                     PIN_AFIO_AF(GPIOD_PIN7, 0U))
+#define VAL_GPIOD_AFRH              (PIN_AFIO_AF(GPIOD_PIN8, 0U) |          \
+                                     PIN_AFIO_AF(GPIOD_PIN9, 0U) |          \
+                                     PIN_AFIO_AF(GPIOD_PIN10, 0U) |         \
+                                     PIN_AFIO_AF(GPIOD_PIN11, 0U) |         \
+                                     PIN_AFIO_AF(GPIOD_PIN12, 0U) |         \
+                                     PIN_AFIO_AF(GPIOD_PIN13, 0U) |         \
+                                     PIN_AFIO_AF(GPIOD_PIN14, 0U) |         \
+                                     PIN_AFIO_AF(GPIOD_PIN15, 0U))
+
+/*
+ * GPIOE setup:
+ *
+ * PE0  - PIN0                      (input pullup).
+ * PE1  - PIN1                      (input pullup).
+ * PE2  - PIN2                      (input pullup).
+ * PE3  - PIN3                      (input pullup).
+ * PE4  - PIN4                      (input pullup).
+ * PE5  - PIN5                      (input pullup).
+ * PE6  - PIN6                      (input pullup).
+ * PE7  - PIN7                      (input pullup).
+ * PE8  - PIN8                      (input pullup).
+ * PE9  - PIN9                      (input pullup).
+ * PE10 - PIN10                     (input pullup).
+ * PE11 - PIN11                     (input pullup).
+ * PE12 - PIN12                     (input pullup).
+ * PE13 - PIN13                     (input pullup).
+ * PE14 - PIN14                     (input pullup).
+ * PE15 - PIN15                     (input pullup).
+ */
+#define VAL_GPIOE_MODER             (PIN_MODE_INPUT(GPIOE_PIN0) |           \
+                                     PIN_MODE_INPUT(GPIOE_PIN1) |           \
+                                     PIN_MODE_INPUT(GPIOE_PIN2) |           \
+                                     PIN_MODE_INPUT(GPIOE_PIN3) |           \
+                                     PIN_MODE_INPUT(GPIOE_PIN4) |           \
+                                     PIN_MODE_INPUT(GPIOE_PIN5) |           \
+                                     PIN_MODE_INPUT(GPIOE_PIN6) |           \
+                                     PIN_MODE_INPUT(GPIOE_PIN7) |           \
+                                     PIN_MODE_INPUT(GPIOE_PIN8) |           \
+                                     PIN_MODE_INPUT(GPIOE_PIN9) |           \
+                                     PIN_MODE_INPUT(GPIOE_PIN10) |          \
+                                     PIN_MODE_INPUT(GPIOE_PIN11) |          \
+                                     PIN_MODE_INPUT(GPIOE_PIN12) |          \
+                                     PIN_MODE_INPUT(GPIOE_PIN13) |          \
+                                     PIN_MODE_INPUT(GPIOE_PIN14) |          \
+                                     PIN_MODE_INPUT(GPIOE_PIN15))
+#define VAL_GPIOE_OTYPER            (PIN_OTYPE_PUSHPULL(GPIOE_PIN0) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOE_PIN1) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOE_PIN2) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOE_PIN3) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOE_PIN4) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOE_PIN5) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOE_PIN6) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOE_PIN7) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOE_PIN8) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOE_PIN9) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOE_PIN10) |      \
+                                     PIN_OTYPE_PUSHPULL(GPIOE_PIN11) |      \
+                                     PIN_OTYPE_PUSHPULL(GPIOE_PIN12) |      \
+                                     PIN_OTYPE_PUSHPULL(GPIOE_PIN13) |      \
+                                     PIN_OTYPE_PUSHPULL(GPIOE_PIN14) |      \
+                                     PIN_OTYPE_PUSHPULL(GPIOE_PIN15))
+#define VAL_GPIOE_OSPEEDR           (PIN_OSPEED_VERYLOW(GPIOE_PIN0) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOE_PIN1) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOE_PIN2) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOE_PIN3) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOE_PIN4) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOE_PIN5) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOE_PIN6) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOE_PIN7) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOE_PIN8) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOE_PIN9) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOE_PIN10) |      \
+                                     PIN_OSPEED_VERYLOW(GPIOE_PIN11) |      \
+                                     PIN_OSPEED_VERYLOW(GPIOE_PIN12) |      \
+                                     PIN_OSPEED_VERYLOW(GPIOE_PIN13) |      \
+                                     PIN_OSPEED_VERYLOW(GPIOE_PIN14) |      \
+                                     PIN_OSPEED_VERYLOW(GPIOE_PIN15))
+#define VAL_GPIOE_PUPDR             (PIN_PUPDR_PULLUP(GPIOE_PIN0) |         \
+                                     PIN_PUPDR_PULLUP(GPIOE_PIN1) |         \
+                                     PIN_PUPDR_PULLUP(GPIOE_PIN2) |         \
+                                     PIN_PUPDR_PULLUP(GPIOE_PIN3) |         \
+                                     PIN_PUPDR_PULLUP(GPIOE_PIN4) |         \
+                                     PIN_PUPDR_PULLUP(GPIOE_PIN5) |         \
+                                     PIN_PUPDR_PULLUP(GPIOE_PIN6) |         \
+                                     PIN_PUPDR_PULLUP(GPIOE_PIN7) |         \
+                                     PIN_PUPDR_PULLUP(GPIOE_PIN8) |         \
+                                     PIN_PUPDR_PULLUP(GPIOE_PIN9) |         \
+                                     PIN_PUPDR_PULLUP(GPIOE_PIN10) |        \
+                                     PIN_PUPDR_PULLUP(GPIOE_PIN11) |        \
+                                     PIN_PUPDR_PULLUP(GPIOE_PIN12) |        \
+                                     PIN_PUPDR_PULLUP(GPIOE_PIN13) |        \
+                                     PIN_PUPDR_PULLUP(GPIOE_PIN14) |        \
+                                     PIN_PUPDR_PULLUP(GPIOE_PIN15))
+#define VAL_GPIOE_ODR               (PIN_ODR_HIGH(GPIOE_PIN0) |             \
+                                     PIN_ODR_HIGH(GPIOE_PIN1) |             \
+                                     PIN_ODR_HIGH(GPIOE_PIN2) |             \
+                                     PIN_ODR_HIGH(GPIOE_PIN3) |             \
+                                     PIN_ODR_HIGH(GPIOE_PIN4) |             \
+                                     PIN_ODR_HIGH(GPIOE_PIN5) |             \
+                                     PIN_ODR_HIGH(GPIOE_PIN6) |             \
+                                     PIN_ODR_HIGH(GPIOE_PIN7) |             \
+                                     PIN_ODR_HIGH(GPIOE_PIN8) |             \
+                                     PIN_ODR_HIGH(GPIOE_PIN9) |             \
+                                     PIN_ODR_HIGH(GPIOE_PIN10) |            \
+                                     PIN_ODR_HIGH(GPIOE_PIN11) |            \
+                                     PIN_ODR_HIGH(GPIOE_PIN12) |            \
+                                     PIN_ODR_HIGH(GPIOE_PIN13) |            \
+                                     PIN_ODR_HIGH(GPIOE_PIN14) |            \
+                                     PIN_ODR_HIGH(GPIOE_PIN15))
+#define VAL_GPIOE_AFRL              (PIN_AFIO_AF(GPIOE_PIN0, 0U) |          \
+                                     PIN_AFIO_AF(GPIOE_PIN1, 0U) |          \
+                                     PIN_AFIO_AF(GPIOE_PIN2, 0U) |          \
+                                     PIN_AFIO_AF(GPIOE_PIN3, 0U) |          \
+                                     PIN_AFIO_AF(GPIOE_PIN4, 0U) |          \
+                                     PIN_AFIO_AF(GPIOE_PIN5, 0U) |          \
+                                     PIN_AFIO_AF(GPIOE_PIN6, 0U) |          \
+                                     PIN_AFIO_AF(GPIOE_PIN7, 0U))
+#define VAL_GPIOE_AFRH              (PIN_AFIO_AF(GPIOE_PIN8, 0U) |          \
+                                     PIN_AFIO_AF(GPIOE_PIN9, 0U) |          \
+                                     PIN_AFIO_AF(GPIOE_PIN10, 0U) |         \
+                                     PIN_AFIO_AF(GPIOE_PIN11, 0U) |         \
+                                     PIN_AFIO_AF(GPIOE_PIN12, 0U) |         \
+                                     PIN_AFIO_AF(GPIOE_PIN13, 0U) |         \
+                                     PIN_AFIO_AF(GPIOE_PIN14, 0U) |         \
+                                     PIN_AFIO_AF(GPIOE_PIN15, 0U))
+
+/*
+ * GPIOF setup:
+ *
+ * PF0  - OSC_IN                    (input floating).
+ * PF1  - OSC_OUT                   (input floating).
+ * PF2  - PIN2                      (input pullup).
+ * PF3  - PIN3                      (input pullup).
+ * PF4  - PIN4                      (input pullup).
+ * PF5  - PIN5                      (input pullup).
+ * PF6  - PIN6                      (input pullup).
+ * PF7  - PIN7                      (input pullup).
+ * PF8  - PIN8                      (input pullup).
+ * PF9  - PIN9                      (input pullup).
+ * PF10 - PIN10                     (input pullup).
+ * PF11 - PIN11                     (input pullup).
+ * PF12 - PIN12                     (input pullup).
+ * PF13 - PIN13                     (input pullup).
+ * PF14 - PIN14                     (input pullup).
+ * PF15 - PIN15                     (input pullup).
+ */
+#define VAL_GPIOF_MODER             (PIN_MODE_INPUT(GPIOF_OSC_IN) |         \
+                                     PIN_MODE_INPUT(GPIOF_OSC_OUT) |        \
+                                     PIN_MODE_INPUT(GPIOF_PIN2) |           \
+                                     PIN_MODE_INPUT(GPIOF_PIN3) |           \
+                                     PIN_MODE_INPUT(GPIOF_PIN4) |           \
+                                     PIN_MODE_INPUT(GPIOF_PIN5) |           \
+                                     PIN_MODE_INPUT(GPIOF_PIN6) |           \
+                                     PIN_MODE_INPUT(GPIOF_PIN7) |           \
+                                     PIN_MODE_INPUT(GPIOF_PIN8) |           \
+                                     PIN_MODE_INPUT(GPIOF_PIN9) |           \
+                                     PIN_MODE_INPUT(GPIOF_PIN10) |          \
+                                     PIN_MODE_INPUT(GPIOF_PIN11) |          \
+                                     PIN_MODE_INPUT(GPIOF_PIN12) |          \
+                                     PIN_MODE_INPUT(GPIOF_PIN13) |          \
+                                     PIN_MODE_INPUT(GPIOF_PIN14) |          \
+                                     PIN_MODE_INPUT(GPIOF_PIN15))
+#define VAL_GPIOF_OTYPER            (PIN_OTYPE_PUSHPULL(GPIOF_OSC_IN) |     \
+                                     PIN_OTYPE_PUSHPULL(GPIOF_OSC_OUT) |    \
+                                     PIN_OTYPE_PUSHPULL(GPIOF_PIN2) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOF_PIN3) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOF_PIN4) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOF_PIN5) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOF_PIN6) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOF_PIN7) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOF_PIN8) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOF_PIN9) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOF_PIN10) |      \
+                                     PIN_OTYPE_PUSHPULL(GPIOF_PIN11) |      \
+                                     PIN_OTYPE_PUSHPULL(GPIOF_PIN12) |      \
+                                     PIN_OTYPE_PUSHPULL(GPIOF_PIN13) |      \
+                                     PIN_OTYPE_PUSHPULL(GPIOF_PIN14) |      \
+                                     PIN_OTYPE_PUSHPULL(GPIOF_PIN15))
+#define VAL_GPIOF_OSPEEDR           (PIN_OSPEED_VERYLOW(GPIOF_OSC_IN) |     \
+                                     PIN_OSPEED_VERYLOW(GPIOF_OSC_OUT) |    \
+                                     PIN_OSPEED_VERYLOW(GPIOF_PIN2) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOF_PIN3) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOF_PIN4) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOF_PIN5) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOF_PIN6) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOF_PIN7) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOF_PIN8) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOF_PIN9) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOF_PIN10) |      \
+                                     PIN_OSPEED_VERYLOW(GPIOF_PIN11) |      \
+                                     PIN_OSPEED_VERYLOW(GPIOF_PIN12) |      \
+                                     PIN_OSPEED_VERYLOW(GPIOF_PIN13) |      \
+                                     PIN_OSPEED_VERYLOW(GPIOF_PIN14) |      \
+                                     PIN_OSPEED_VERYLOW(GPIOF_PIN15))
+#define VAL_GPIOF_PUPDR             (PIN_PUPDR_FLOATING(GPIOF_OSC_IN) |     \
+                                     PIN_PUPDR_FLOATING(GPIOF_OSC_OUT) |    \
+                                     PIN_PUPDR_PULLUP(GPIOF_PIN2) |         \
+                                     PIN_PUPDR_PULLUP(GPIOF_PIN3) |         \
+                                     PIN_PUPDR_PULLUP(GPIOF_PIN4) |         \
+                                     PIN_PUPDR_PULLUP(GPIOF_PIN5) |         \
+                                     PIN_PUPDR_PULLUP(GPIOF_PIN6) |         \
+                                     PIN_PUPDR_PULLUP(GPIOF_PIN7) |         \
+                                     PIN_PUPDR_PULLUP(GPIOF_PIN8) |         \
+                                     PIN_PUPDR_PULLUP(GPIOF_PIN9) |         \
+                                     PIN_PUPDR_PULLUP(GPIOF_PIN10) |        \
+                                     PIN_PUPDR_PULLUP(GPIOF_PIN11) |        \
+                                     PIN_PUPDR_PULLUP(GPIOF_PIN12) |        \
+                                     PIN_PUPDR_PULLUP(GPIOF_PIN13) |        \
+                                     PIN_PUPDR_PULLUP(GPIOF_PIN14) |        \
+                                     PIN_PUPDR_PULLUP(GPIOF_PIN15))
+#define VAL_GPIOF_ODR               (PIN_ODR_HIGH(GPIOF_OSC_IN) |           \
+                                     PIN_ODR_HIGH(GPIOF_OSC_OUT) |          \
+                                     PIN_ODR_HIGH(GPIOF_PIN2) |             \
+                                     PIN_ODR_HIGH(GPIOF_PIN3) |             \
+                                     PIN_ODR_HIGH(GPIOF_PIN4) |             \
+                                     PIN_ODR_HIGH(GPIOF_PIN5) |             \
+                                     PIN_ODR_HIGH(GPIOF_PIN6) |             \
+                                     PIN_ODR_HIGH(GPIOF_PIN7) |             \
+                                     PIN_ODR_HIGH(GPIOF_PIN8) |             \
+                                     PIN_ODR_HIGH(GPIOF_PIN9) |             \
+                                     PIN_ODR_HIGH(GPIOF_PIN10) |            \
+                                     PIN_ODR_HIGH(GPIOF_PIN11) |            \
+                                     PIN_ODR_HIGH(GPIOF_PIN12) |            \
+                                     PIN_ODR_HIGH(GPIOF_PIN13) |            \
+                                     PIN_ODR_HIGH(GPIOF_PIN14) |            \
+                                     PIN_ODR_HIGH(GPIOF_PIN15))
+#define VAL_GPIOF_AFRL              (PIN_AFIO_AF(GPIOF_OSC_IN, 0U) |        \
+                                     PIN_AFIO_AF(GPIOF_OSC_OUT, 0U) |       \
+                                     PIN_AFIO_AF(GPIOF_PIN2, 0U) |          \
+                                     PIN_AFIO_AF(GPIOF_PIN3, 0U) |          \
+                                     PIN_AFIO_AF(GPIOF_PIN4, 0U) |          \
+                                     PIN_AFIO_AF(GPIOF_PIN5, 0U) |          \
+                                     PIN_AFIO_AF(GPIOF_PIN6, 0U) |          \
+                                     PIN_AFIO_AF(GPIOF_PIN7, 0U))
+#define VAL_GPIOF_AFRH              (PIN_AFIO_AF(GPIOF_PIN8, 0U) |          \
+                                     PIN_AFIO_AF(GPIOF_PIN9, 0U) |          \
+                                     PIN_AFIO_AF(GPIOF_PIN10, 0U) |         \
+                                     PIN_AFIO_AF(GPIOF_PIN11, 0U) |         \
+                                     PIN_AFIO_AF(GPIOF_PIN12, 0U) |         \
+                                     PIN_AFIO_AF(GPIOF_PIN13, 0U) |         \
+                                     PIN_AFIO_AF(GPIOF_PIN14, 0U) |         \
+                                     PIN_AFIO_AF(GPIOF_PIN15, 0U))
+
+
+#if !defined(_FROM_ASM_)
+#ifdef __cplusplus
+extern "C" {
+#endif
+  void boardInit(void);
+#ifdef __cplusplus
+}
+#endif
+#endif /* _FROM_ASM_ */
+
+#endif /* BOARD_H */

keyboards/cannonkeys/chimera65/boards/ST_STM32F072B_DISCOVERY/board.mk

@@ -0,0 +1,5 @@
+# List of all the board related files.
+BOARDSRC = $(BOARD_PATH)/boards/ST_STM32F072B_DISCOVERY/board.c
+
+# Required include directories
+BOARDINC = $(BOARD_PATH)/boards/ST_STM32F072B_DISCOVERY

keyboards/cannonkeys/chimera65/boards/ST_STM32F072B_DISCOVERY/cfg/board.chcfg

@@ -0,0 +1,703 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<!-- STM32F0xx board Template -->
+<board
+  xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
+  xsi:noNamespaceSchemaLocation="http://www.chibios.org/xml/schema/boards/stm32f0xx_board.xsd">
+  <configuration_settings>
+    <templates_path>resources/gencfg/processors/boards/stm32f0xx/templates</templates_path>
+    <output_path>..</output_path>
+    <hal_version>3.0.x</hal_version>
+  </configuration_settings>
+  <board_name>ST STM32F072B-Discovery</board_name>
+  <board_id>ST_STM32F072B_DISCOVERY</board_id>
+  <board_functions></board_functions>
+  <subtype>STM32F072xB</subtype>
+  <clocks HSEFrequency="0" HSEBypass="true" LSEFrequency="0"
+  	LSEBypass="false" LSEDrive="3 High Drive (default)" />
+  <ports>
+    <GPIOA>
+      <pin0
+        ID="BUTTON"
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="Floating"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin1
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin2
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin3
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin4
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin5
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin6
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin7
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin8
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin9
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin10
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin11
+        ID="USB_DM"
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="Floating"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin12
+        ID="USB_DP"
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="Floating"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin13
+        ID="SWDIO"
+        Type="PushPull"
+        Speed="Maximum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Alternate"
+        Alternate="0" />
+      <pin14
+        ID="SWCLK"
+        Type="PushPull"
+        Speed="Maximum"
+        Resistor="PullDown"
+        Level="High"
+        Mode="Alternate"
+        Alternate="0" />
+      <pin15
+        ID=""
+        Type="PushPull"
+        Speed="Maximum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+    </GPIOA>
+    <GPIOB>
+      <pin0
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin1
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin2
+        ID=""
+        Type="PushPull"
+        Speed="Maximum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin3
+        ID=""
+        Type="PushPull"
+        Speed="Maximum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin4
+        ID=""
+        Type="PushPull"
+        Speed="Maximum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin5
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin6
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin7
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin8
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin9
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin10
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin11
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin12
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin13
+        ID="SPI2_SCK"
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="Floating"
+        Level="High"
+        Mode="Alternate"
+        Alternate="0" />
+      <pin14
+        ID="SPI2_MISO"
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="Floating"
+        Level="High"
+        Mode="Alternate"
+        Alternate="0" />
+      <pin15
+        ID="SPI2_MOSI"
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="Floating"
+        Level="High"
+        Mode="Alternate"
+        Alternate="0" />
+    </GPIOB>
+    <GPIOC>
+      <pin0
+        ID="MEMS_CS"
+        Type="PushPull"
+        Speed="Maximum"
+        Resistor="Floating"
+        Level="High"
+        Mode="Output"
+        Alternate="0" />
+      <pin1
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin2
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin3
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin4
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin5
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin6
+        ID="LED_RED"
+        Type="PushPull"
+        Speed="Maximum"
+        Resistor="Floating"
+        Level="Low"
+        Mode="Output"
+        Alternate="0" />
+      <pin7
+        ID="LED_BLUE"
+        Type="PushPull"
+        Speed="Maximum"
+        Resistor="Floating"
+        Level="Low"
+        Mode="Output"
+        Alternate="0" />
+      <pin8
+        ID="LED_ORANGE"
+        Type="PushPull"
+        Speed="Maximum"
+        Resistor="Floating"
+        Level="Low"
+        Mode="Output"
+        Alternate="0" ></pin8>
+      <pin9
+        ID="LED_GREEN"
+        Type="PushPull"
+        Speed="Maximum"
+        Resistor="Floating"
+        Level="Low"
+        Mode="Output"
+        Alternate="0" />
+      <pin10
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin11
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin12
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin13
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin14
+        ID="OSC32_IN"
+        Type="PushPull"
+        Speed="Maximum"
+        Resistor="Floating"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin15
+        ID="OSC32_OUT"
+        Type="PushPull"
+        Speed="Maximum"
+        Resistor="Floating"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+    </GPIOC>
+    <GPIOD>
+      <pin0
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin1
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin2
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin3
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin4
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin5
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin6
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin7
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin8
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin9
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin10
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin11
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin12
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin13
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin14
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin15
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+    </GPIOD>
+    <GPIOE>
+    	<pin0 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
+    		Level="High" Mode="Input" Alternate="0" />
+    	<pin1 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
+    		Level="High" Mode="Input" Alternate="0" />
+    	<pin2 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
+    		Level="High" Mode="Input" Alternate="0" />
+    	<pin3 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
+    		Level="High" Mode="Input" Alternate="0" />
+    	<pin4 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
+    		Level="High" Mode="Input" Alternate="0" />
+    	<pin5 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
+    		Level="High" Mode="Input" Alternate="0" />
+    	<pin6 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
+    		Level="High" Mode="Input" Alternate="0" />
+    	<pin7 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
+    		Level="High" Mode="Input" Alternate="0" />
+    	<pin8 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
+    		Level="High" Mode="Input" Alternate="0" />
+    	<pin9 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
+    		Level="High" Mode="Input" Alternate="0" />
+    	<pin10 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
+    		Level="High" Mode="Input" Alternate="0" />
+    	<pin11 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
+    		Level="High" Mode="Input" Alternate="0" />
+    	<pin12 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
+    		Level="High" Mode="Input" Alternate="0" />
+    	<pin13 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
+    		Level="High" Mode="Input" Alternate="0" />
+    	<pin14 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
+    		Level="High" Mode="Input" Alternate="0" />
+    	<pin15 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
+    		Level="High" Mode="Input" Alternate="0" />
+    </GPIOE>
+    <GPIOF>
+      <pin0
+        ID="OSC_IN"
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="Floating"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin1
+        ID="OSC_OUT"
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="Floating"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin2
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin3
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin4
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin5
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin6
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin7
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin8
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin9
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin10
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin11
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin12
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin13
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin14
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin15
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+    </GPIOF>
+  </ports>
+</board>

keyboards/cannonkeys/chimera65/bootloader_defs.h

@@ -0,0 +1,7 @@
+/* Address for jumping to bootloader on STM32 chips. */
+/* It is chip dependent, the correct number can be looked up here (page 175):
+ * http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf
+ * This also requires a patch to chibios:
+ *  <tmk_dir>/tmk_core/tool/chibios/ch-bootloader-jump.patch
+ */
+#define STM32_BOOTLOADER_ADDRESS 0x1FFFC800

keyboards/cannonkeys/chimera65/chconf.h

@@ -0,0 +1,524 @@
+/*
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+/**
+ * @file    templates/chconf.h
+ * @brief   Configuration file template.
+ * @details A copy of this file must be placed in each project directory, it
+ *          contains the application specific kernel settings.
+ *
+ * @addtogroup config
+ * @details Kernel related settings and hooks.
+ * @{
+ */
+
+#ifndef CHCONF_H
+#define CHCONF_H
+
+#define _CHIBIOS_RT_CONF_
+
+/*===========================================================================*/
+/**
+ * @name System timers settings
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   System time counter resolution.
+ * @note    Allowed values are 16 or 32 bits.
+ */
+#define CH_CFG_ST_RESOLUTION                32
+
+/**
+ * @brief   System tick frequency.
+ * @details Frequency of the system timer that drives the system ticks. This
+ *          setting also defines the system tick time unit.
+ */
+#define CH_CFG_ST_FREQUENCY                 10000
+
+/**
+ * @brief   Time delta constant for the tick-less mode.
+ * @note    If this value is zero then the system uses the classic
+ *          periodic tick. This value represents the minimum number
+ *          of ticks that is safe to specify in a timeout directive.
+ *          The value one is not valid, timeouts are rounded up to
+ *          this value.
+ */
+#define CH_CFG_ST_TIMEDELTA                 2
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Kernel parameters and options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Round robin interval.
+ * @details This constant is the number of system ticks allowed for the
+ *          threads before preemption occurs. Setting this value to zero
+ *          disables the preemption for threads with equal priority and the
+ *          round robin becomes cooperative. Note that higher priority
+ *          threads can still preempt, the kernel is always preemptive.
+ * @note    Disabling the round robin preemption makes the kernel more compact
+ *          and generally faster.
+ * @note    The round robin preemption is not supported in tickless mode and
+ *          must be set to zero in that case.
+ */
+#define CH_CFG_TIME_QUANTUM                 0
+
+/**
+ * @brief   Managed RAM size.
+ * @details Size of the RAM area to be managed by the OS. If set to zero
+ *          then the whole available RAM is used. The core memory is made
+ *          available to the heap allocator and/or can be used directly through
+ *          the simplified core memory allocator.
+ *
+ * @note    In order to let the OS manage the whole RAM the linker script must
+ *          provide the @p __heap_base__ and @p __heap_end__ symbols.
+ * @note    Requires @p CH_CFG_USE_MEMCORE.
+ */
+#define CH_CFG_MEMCORE_SIZE                 0
+
+/**
+ * @brief   Idle thread automatic spawn suppression.
+ * @details When this option is activated the function @p chSysInit()
+ *          does not spawn the idle thread. The application @p main()
+ *          function becomes the idle thread and must implement an
+ *          infinite loop.
+ */
+#define CH_CFG_NO_IDLE_THREAD               FALSE
+
+/* Use __WFI in the idle thread for waiting. Does lower the power
+ * consumption. */
+#define CORTEX_ENABLE_WFI_IDLE              TRUE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Performance options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   OS optimization.
+ * @details If enabled then time efficient rather than space efficient code
+ *          is used when two possible implementations exist.
+ *
+ * @note    This is not related to the compiler optimization options.
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_OPTIMIZE_SPEED               FALSE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Subsystem options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Time Measurement APIs.
+ * @details If enabled then the time measurement APIs are included in
+ *          the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_TM                       FALSE
+
+/**
+ * @brief   Threads registry APIs.
+ * @details If enabled then the registry APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_REGISTRY                 TRUE
+
+/**
+ * @brief   Threads synchronization APIs.
+ * @details If enabled then the @p chThdWait() function is included in
+ *          the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_WAITEXIT                 TRUE
+
+/**
+ * @brief   Semaphores APIs.
+ * @details If enabled then the Semaphores APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_SEMAPHORES               TRUE
+
+/**
+ * @brief   Semaphores queuing mode.
+ * @details If enabled then the threads are enqueued on semaphores by
+ *          priority rather than in FIFO order.
+ *
+ * @note    The default is @p FALSE. Enable this if you have special
+ *          requirements.
+ * @note    Requires @p CH_CFG_USE_SEMAPHORES.
+ */
+#define CH_CFG_USE_SEMAPHORES_PRIORITY      FALSE
+
+/**
+ * @brief   Mutexes APIs.
+ * @details If enabled then the mutexes APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_MUTEXES                  TRUE
+
+/**
+ * @brief   Enables recursive behavior on mutexes.
+ * @note    Recursive mutexes are heavier and have an increased
+ *          memory footprint.
+ *
+ * @note    The default is @p FALSE.
+ * @note    Requires @p CH_CFG_USE_MUTEXES.
+ */
+#define CH_CFG_USE_MUTEXES_RECURSIVE        FALSE
+
+/**
+ * @brief   Conditional Variables APIs.
+ * @details If enabled then the conditional variables APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_MUTEXES.
+ */
+#define CH_CFG_USE_CONDVARS                 TRUE
+
+/**
+ * @brief   Conditional Variables APIs with timeout.
+ * @details If enabled then the conditional variables APIs with timeout
+ *          specification are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_CONDVARS.
+ */
+#define CH_CFG_USE_CONDVARS_TIMEOUT         FALSE
+
+/**
+ * @brief   Events Flags APIs.
+ * @details If enabled then the event flags APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_EVENTS                   TRUE
+
+/**
+ * @brief   Events Flags APIs with timeout.
+ * @details If enabled then the events APIs with timeout specification
+ *          are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_EVENTS.
+ */
+#define CH_CFG_USE_EVENTS_TIMEOUT           TRUE
+
+/**
+ * @brief   Synchronous Messages APIs.
+ * @details If enabled then the synchronous messages APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_MESSAGES                 TRUE
+
+/**
+ * @brief   Synchronous Messages queuing mode.
+ * @details If enabled then messages are served by priority rather than in
+ *          FIFO order.
+ *
+ * @note    The default is @p FALSE. Enable this if you have special
+ *          requirements.
+ * @note    Requires @p CH_CFG_USE_MESSAGES.
+ */
+#define CH_CFG_USE_MESSAGES_PRIORITY        FALSE
+
+/**
+ * @brief   Mailboxes APIs.
+ * @details If enabled then the asynchronous messages (mailboxes) APIs are
+ *          included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_SEMAPHORES.
+ */
+#define CH_CFG_USE_MAILBOXES                TRUE
+
+/**
+ * @brief   Core Memory Manager APIs.
+ * @details If enabled then the core memory manager APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_MEMCORE                  FALSE
+
+/**
+ * @brief   Heap Allocator APIs.
+ * @details If enabled then the memory heap allocator APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or
+ *          @p CH_CFG_USE_SEMAPHORES.
+ * @note    Mutexes are recommended.
+ */
+#define CH_CFG_USE_HEAP                     FALSE
+
+/**
+ * @brief   Memory Pools Allocator APIs.
+ * @details If enabled then the memory pools allocator APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_MEMPOOLS                 FALSE
+
+/**
+ * @brief   Dynamic Threads APIs.
+ * @details If enabled then the dynamic threads creation APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_WAITEXIT.
+ * @note    Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS.
+ */
+#define CH_CFG_USE_DYNAMIC                  FALSE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Debug options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Debug option, kernel statistics.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_STATISTICS                   FALSE
+
+/**
+ * @brief   Debug option, system state check.
+ * @details If enabled the correct call protocol for system APIs is checked
+ *          at runtime.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_SYSTEM_STATE_CHECK           FALSE
+
+/**
+ * @brief   Debug option, parameters checks.
+ * @details If enabled then the checks on the API functions input
+ *          parameters are activated.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_ENABLE_CHECKS                FALSE
+
+/**
+ * @brief   Debug option, consistency checks.
+ * @details If enabled then all the assertions in the kernel code are
+ *          activated. This includes consistency checks inside the kernel,
+ *          runtime anomalies and port-defined checks.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_ENABLE_ASSERTS               FALSE
+
+/**
+ * @brief   Debug option, trace buffer.
+ * @details If enabled then the trace buffer is activated.
+ *
+ * @note    The default is @p CH_DBG_TRACE_MASK_DISABLED.
+ */
+#define CH_DBG_TRACE_MASK                   CH_DBG_TRACE_MASK_DISABLED
+
+/**
+ * @brief   Trace buffer entries.
+ * @note    The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is
+ *          different from @p CH_DBG_TRACE_MASK_DISABLED.
+ */
+#define CH_DBG_TRACE_BUFFER_SIZE            128
+
+/**
+ * @brief   Debug option, stack checks.
+ * @details If enabled then a runtime stack check is performed.
+ *
+ * @note    The default is @p FALSE.
+ * @note    The stack check is performed in a architecture/port dependent way.
+ *          It may not be implemented or some ports.
+ * @note    The default failure mode is to halt the system with the global
+ *          @p panic_msg variable set to @p NULL.
+ */
+#define CH_DBG_ENABLE_STACK_CHECK           FALSE
+
+/**
+ * @brief   Debug option, stacks initialization.
+ * @details If enabled then the threads working area is filled with a byte
+ *          value when a thread is created. This can be useful for the
+ *          runtime measurement of the used stack.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_FILL_THREADS                 FALSE
+
+/**
+ * @brief   Debug option, threads profiling.
+ * @details If enabled then a field is added to the @p thread_t structure that
+ *          counts the system ticks occurred while executing the thread.
+ *
+ * @note    The default is @p FALSE.
+ * @note    This debug option is not currently compatible with the
+ *          tickless mode.
+ */
+#define CH_DBG_THREADS_PROFILING            FALSE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Kernel hooks
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Threads descriptor structure extension.
+ * @details User fields added to the end of the @p thread_t structure.
+ */
+#define CH_CFG_THREAD_EXTRA_FIELDS                                          \
+  /* Add threads custom fields here.*/
+
+/**
+ * @brief   Threads initialization hook.
+ * @details User initialization code added to the @p chThdInit() API.
+ *
+ * @note    It is invoked from within @p chThdInit() and implicitly from all
+ *          the threads creation APIs.
+ */
+#define CH_CFG_THREAD_INIT_HOOK(tp) {                                       \
+  /* Add threads initialization code here.*/                                \
+}
+
+/**
+ * @brief   Threads finalization hook.
+ * @details User finalization code added to the @p chThdExit() API.
+ */
+#define CH_CFG_THREAD_EXIT_HOOK(tp) {                                       \
+  /* Add threads finalization code here.*/                                  \
+}
+
+/**
+ * @brief   Context switch hook.
+ * @details This hook is invoked just before switching between threads.
+ */
+#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) {                              \
+  /* Context switch code here.*/                                            \
+}
+
+/**
+ * @brief   ISR enter hook.
+ */
+#define CH_CFG_IRQ_PROLOGUE_HOOK() {                                        \
+  /* IRQ prologue code here.*/                                              \
+}
+
+/**
+ * @brief   ISR exit hook.
+ */
+#define CH_CFG_IRQ_EPILOGUE_HOOK() {                                        \
+  /* IRQ epilogue code here.*/                                              \
+}
+
+/**
+ * @brief   Idle thread enter hook.
+ * @note    This hook is invoked within a critical zone, no OS functions
+ *          should be invoked from here.
+ * @note    This macro can be used to activate a power saving mode.
+ */
+#define CH_CFG_IDLE_ENTER_HOOK() {                                          \
+  /* Idle-enter code here.*/                                                \
+}
+
+/**
+ * @brief   Idle thread leave hook.
+ * @note    This hook is invoked within a critical zone, no OS functions
+ *          should be invoked from here.
+ * @note    This macro can be used to deactivate a power saving mode.
+ */
+#define CH_CFG_IDLE_LEAVE_HOOK() {                                          \
+  /* Idle-leave code here.*/                                                \
+}
+
+/**
+ * @brief   Idle Loop hook.
+ * @details This hook is continuously invoked by the idle thread loop.
+ */
+#define CH_CFG_IDLE_LOOP_HOOK() {                                           \
+  /* Idle loop code here.*/                                                 \
+}
+
+/**
+ * @brief   System tick event hook.
+ * @details This hook is invoked in the system tick handler immediately
+ *          after processing the virtual timers queue.
+ */
+#define CH_CFG_SYSTEM_TICK_HOOK() {                                         \
+  /* System tick event code here.*/                                         \
+}
+
+/**
+ * @brief   System halt hook.
+ * @details This hook is invoked in case to a system halting error before
+ *          the system is halted.
+ */
+#define CH_CFG_SYSTEM_HALT_HOOK(reason) {                                   \
+  /* System halt code here.*/                                               \
+}
+
+/**
+ * @brief   Trace hook.
+ * @details This hook is invoked each time a new record is written in the
+ *          trace buffer.
+ */
+#define CH_CFG_TRACE_HOOK(tep) {                                            \
+  /* Trace code here.*/                                                     \
+}
+
+/** @} */
+
+/*===========================================================================*/
+/* Port-specific settings (override port settings defaulted in chcore.h).    */
+/*===========================================================================*/
+
+#endif  /* CHCONF_H */
+
+/** @} */

keyboards/cannonkeys/chimera65/chimera65.c

@@ -0,0 +1 @@
+#include "chimera65.h"

keyboards/cannonkeys/chimera65/chimera65.h

@@ -0,0 +1,17 @@
+#pragma once
+
+#include "quantum.h"
+
+#define LAYOUT_default( \
+	K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014,       \
+	K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113,       K115, \
+	K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213,       K215, \
+	K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313,       K315, \
+	K400, K401, K402,                   K406,             K409, K410, K411, K412, K413,       K415  \
+) { \
+	{ K000,  K001,  K002,  K003,  K004,  K005,  K006,  K007,  K008,  K009,  K010,  K011,  K012,  K013,  K014,  KC_NO }, \
+	{ K100,  K101,  K102,  K103,  K104,  K105,  K106,  K107,  K108,  K109,  K110,  K111,  K112,  K113,  KC_NO, K115 }, \
+	{ K200,  K201,  K202,  K203,  K204,  K205,  K206,  K207,  K208,  K209,  K210,  K211,  K212,  K213,  KC_NO, K215 }, \
+	{ K300,  K301,  K302,  K303,  K304,  K305,  K306,  K307,  K308,  K309,  K310,  K311,  K312,  K313,  KC_NO, K315 }, \
+	{ K400,  K401,  K402,  KC_NO, KC_NO, KC_NO, K406,  KC_NO, KC_NO, K409,  K410,  K411,  K412,  K413,  KC_NO, K415 }  \
+}

keyboards/cannonkeys/chimera65/config.h

@@ -0,0 +1,89 @@
+/*
+Copyright 2015 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0xCA04
+#define PRODUCT_ID      0xC024
+#define DEVICE_VER      0x0001
+/* in python2: list(u"whatever".encode('utf-16-le')) */
+/*   at most 32 characters or the ugly hack in usb_main.c borks */
+#define MANUFACTURER CannonKeys
+#define PRODUCT Chimera65
+#define DESCRIPTION Chimera65 Keyboard
+
+/* key matrix size */
+#define MATRIX_ROWS 5
+#define MATRIX_COLS 16
+
+#define MATRIX_COL_PINS { B11, B10, B2, B1, A5, A4, A3, A2, A1, F0, C15, C14, A9, A8, A10, B3 }
+#define MATRIX_ROW_PINS { A13, A14, A15, C13, B8 }
+#define DIODE_DIRECTION COL2ROW
+
+#define BACKLIGHT_LEVELS 6
+#define BACKLIGHT_BREATHING
+#define BREATHING_PERIOD 6
+
+/* define if matrix has ghost */
+//#define MATRIX_HAS_GHOST
+
+/* Set 0 if debouncing isn't needed */
+#define DEBOUNCE    5
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+// EEPROM usage
+// TODO: refactor with new user EEPROM code (coming soon)
+#define EEPROM_MAGIC 0x451F
+#define EEPROM_MAGIC_ADDR 34
+// Bump this every time we change what we store
+// This will automatically reset the EEPROM with defaults
+// and avoid loading invalid data from the EEPROM
+#define EEPROM_VERSION 0x02
+#define EEPROM_VERSION_ADDR 36
+
+
+#define DYNAMIC_KEYMAP_LAYER_COUNT 4
+// Dynamic macro starts after dynamic keymaps (35+(4*5*15*2)) = (35+600) = 635
+// start + layer * rows * col * 2
+#define DYNAMIC_KEYMAP_EEPROM_ADDR 37
+#define EEPROM_CUSTOM_BACKLIGHT 678
+#define DYNAMIC_KEYMAP_MACRO_EEPROM_ADDR 679
+#define DYNAMIC_KEYMAP_MACRO_EEPROM_SIZE 202
+#define DYNAMIC_KEYMAP_MACRO_COUNT 16
+
+/*
+ * Feature disable options
+ *  These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+//#define NO_DEBUG
+
+/* disable print */
+//#define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+//#define NO_ACTION_MACRO
+//#define NO_ACTION_FUNCTION

keyboards/cannonkeys/chimera65/halconf.h

@@ -0,0 +1,354 @@
+/*
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+/**
+ * @file    templates/halconf.h
+ * @brief   HAL configuration header.
+ * @details HAL configuration file, this file allows to enable or disable the
+ *          various device drivers from your application. You may also use
+ *          this file in order to override the device drivers default settings.
+ *
+ * @addtogroup HAL_CONF
+ * @{
+ */
+
+#ifndef _HALCONF_H_
+#define _HALCONF_H_
+
+#include "mcuconf.h"
+
+/**
+ * @brief   Enables the PAL subsystem.
+ */
+#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__)
+#define HAL_USE_PAL                 TRUE
+#endif
+
+/**
+ * @brief   Enables the ADC subsystem.
+ */
+#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__)
+#define HAL_USE_ADC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the CAN subsystem.
+ */
+#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__)
+#define HAL_USE_CAN                 FALSE
+#endif
+
+/**
+ * @brief   Enables the DAC subsystem.
+ */
+#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__)
+#define HAL_USE_DAC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the EXT subsystem.
+ */
+#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__)
+#define HAL_USE_EXT                 FALSE
+#endif
+
+/**
+ * @brief   Enables the GPT subsystem.
+ */
+#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__)
+#define HAL_USE_GPT                 FALSE
+#endif
+
+/**
+ * @brief   Enables the I2C subsystem.
+ */
+#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__)
+#define HAL_USE_I2C                 TRUE
+#endif
+
+/**
+ * @brief   Enables the I2S subsystem.
+ */
+#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__)
+#define HAL_USE_I2S                 FALSE
+#endif
+
+/**
+ * @brief   Enables the ICU subsystem.
+ */
+#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__)
+#define HAL_USE_ICU                 FALSE
+#endif
+
+/**
+ * @brief   Enables the MAC subsystem.
+ */
+#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__)
+#define HAL_USE_MAC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the MMC_SPI subsystem.
+ */
+#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__)
+#define HAL_USE_MMC_SPI             FALSE
+#endif
+
+/**
+ * @brief   Enables the PWM subsystem.
+ */
+#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__)
+#define HAL_USE_PWM                 TRUE
+#endif
+
+/**
+ * @brief   Enables the RTC subsystem.
+ */
+#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__)
+#define HAL_USE_RTC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the SDC subsystem.
+ */
+#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__)
+#define HAL_USE_SDC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the SERIAL subsystem.
+ */
+#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__)
+#define HAL_USE_SERIAL              FALSE
+#endif
+
+/**
+ * @brief   Enables the SERIAL over USB subsystem.
+ */
+#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__)
+#define HAL_USE_SERIAL_USB          FALSE
+#endif
+
+/**
+ * @brief   Enables the SPI subsystem.
+ */
+#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__)
+#define HAL_USE_SPI                 FALSE
+#endif
+
+/**
+ * @brief   Enables the UART subsystem.
+ */
+#if !defined(HAL_USE_UART) || defined(__DOXYGEN__)
+#define HAL_USE_UART                FALSE
+#endif
+
+/**
+ * @brief   Enables the USB subsystem.
+ */
+#if !defined(HAL_USE_USB) || defined(__DOXYGEN__)
+#define HAL_USE_USB                 TRUE
+#endif
+
+/**
+ * @brief   Enables the WDG subsystem.
+ */
+#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__)
+#define HAL_USE_WDG                 FALSE
+#endif
+
+/*===========================================================================*/
+/* ADC driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__)
+#define ADC_USE_WAIT                TRUE
+#endif
+
+/**
+ * @brief   Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define ADC_USE_MUTUAL_EXCLUSION    TRUE
+#endif
+
+/*===========================================================================*/
+/* CAN driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Sleep mode related APIs inclusion switch.
+ */
+#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__)
+#define CAN_USE_SLEEP_MODE          TRUE
+#endif
+
+/*===========================================================================*/
+/* I2C driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables the mutual exclusion APIs on the I2C bus.
+ */
+#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define I2C_USE_MUTUAL_EXCLUSION    TRUE
+#endif
+
+/*===========================================================================*/
+/* MAC driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables an event sources for incoming packets.
+ */
+#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__)
+#define MAC_USE_ZERO_COPY           FALSE
+#endif
+
+/**
+ * @brief   Enables an event sources for incoming packets.
+ */
+#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__)
+#define MAC_USE_EVENTS              TRUE
+#endif
+
+/*===========================================================================*/
+/* MMC_SPI driver related settings.                                          */
+/*===========================================================================*/
+
+/**
+ * @brief   Delays insertions.
+ * @details If enabled this options inserts delays into the MMC waiting
+ *          routines releasing some extra CPU time for the threads with
+ *          lower priority, this may slow down the driver a bit however.
+ *          This option is recommended also if the SPI driver does not
+ *          use a DMA channel and heavily loads the CPU.
+ */
+#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__)
+#define MMC_NICE_WAITING            TRUE
+#endif
+
+/*===========================================================================*/
+/* SDC driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Number of initialization attempts before rejecting the card.
+ * @note    Attempts are performed at 10mS intervals.
+ */
+#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__)
+#define SDC_INIT_RETRY              100
+#endif
+
+/**
+ * @brief   Include support for MMC cards.
+ * @note    MMC support is not yet implemented so this option must be kept
+ *          at @p FALSE.
+ */
+#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__)
+#define SDC_MMC_SUPPORT             FALSE
+#endif
+
+/**
+ * @brief   Delays insertions.
+ * @details If enabled this options inserts delays into the MMC waiting
+ *          routines releasing some extra CPU time for the threads with
+ *          lower priority, this may slow down the driver a bit however.
+ */
+#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__)
+#define SDC_NICE_WAITING            TRUE
+#endif
+
+/*===========================================================================*/
+/* SERIAL driver related settings.                                           */
+/*===========================================================================*/
+
+/**
+ * @brief   Default bit rate.
+ * @details Configuration parameter, this is the baud rate selected for the
+ *          default configuration.
+ */
+#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__)
+#define SERIAL_DEFAULT_BITRATE      38400
+#endif
+
+/**
+ * @brief   Serial buffers size.
+ * @details Configuration parameter, you can change the depth of the queue
+ *          buffers depending on the requirements of your application.
+ * @note    The default is 64 bytes for both the transmission and receive
+ *          buffers.
+ */
+#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__)
+#define SERIAL_BUFFERS_SIZE         16
+#endif
+
+/*===========================================================================*/
+/* SERIAL_USB driver related setting.                                        */
+/*===========================================================================*/
+
+/**
+ * @brief   Serial over USB buffers size.
+ * @details Configuration parameter, the buffer size must be a multiple of
+ *          the USB data endpoint maximum packet size.
+ * @note    The default is 64 bytes for both the transmission and receive
+ *          buffers.
+ */
+#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__)
+#define SERIAL_USB_BUFFERS_SIZE     1
+#endif
+
+/*===========================================================================*/
+/* SPI driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__)
+#define SPI_USE_WAIT                TRUE
+#endif
+
+/**
+ * @brief   Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define SPI_USE_MUTUAL_EXCLUSION    TRUE
+#endif
+
+
+/*===========================================================================*/
+/* USB driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__)
+#define USB_USE_WAIT                TRUE
+#endif
+
+#endif /* _HALCONF_H_ */
+
+/** @} */

keyboards/cannonkeys/chimera65/info.json

@@ -0,0 +1,7 @@
+{
+    "keyboard_name": "Chimera65",
+    "url": "https://cannonkeys.com",
+    "maintainer": "awkannan",
+    "width": 16,
+    "height": 5
+}

keyboards/cannonkeys/chimera65/keymaps/default/keymap.c

@@ -0,0 +1,44 @@
+/*
+Copyright 2012,2013 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+#include QMK_KEYBOARD_H
+
+
+// Each layer gets a name for readability, which is then used in the keymap matrix below.
+// The underscores don't mean anything - you can have a layer called STUFF or any other name.
+// Layer names don't all need to be of the same length, obviously, and you can also skip them
+// entirely and just use numbers.
+#define _BASE 0
+#define _FN1 1
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+	[_BASE] = LAYOUT_default(
+		KC_GESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_DEL,
+		KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL,
+		KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_NUBS, KC_ENT, KC_PGUP,
+		KC_LSFT, KC_NUHS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_PGDN,
+		KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, MO(_FN1), KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT
+    ),
+
+    [_FN1] = LAYOUT_default(
+		KC_GESC, KC_F1,   KC_F2, KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_DEL, KC_TRNS,
+		KC_TRNS, KC_TRNS, KC_UP, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+		BL_BRTG, KC_LEFT, KC_DOWN, KC_RGHT, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+		BL_INC,  BL_DEC,  BL_TOGG, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+		KC_GRV, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RESET, KC_TRNS, KC_TRNS, KC_TRNS
+    )
+};

keyboards/cannonkeys/chimera65/keymaps/via/keymap.c

@@ -0,0 +1,44 @@
+/*
+Copyright 2012,2013 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+#include QMK_KEYBOARD_H
+
+
+// Each layer gets a name for readability, which is then used in the keymap matrix below.
+// The underscores don't mean anything - you can have a layer called STUFF or any other name.
+// Layer names don't all need to be of the same length, obviously, and you can also skip them
+// entirely and just use numbers.
+#define _BASE 0
+#define _FN1 1
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+	[_BASE] = LAYOUT_default(
+		KC_GESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_DEL,
+		KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL,
+		KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_NUBS, KC_ENT, KC_PGUP,
+		KC_LSFT, KC_NUHS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_PGDN,
+		KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, MO(_FN1), KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT
+    ),
+
+    [_FN1] = LAYOUT_default(
+		KC_GESC, KC_F1,   KC_F2, KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_DEL, KC_TRNS,
+		KC_TRNS, KC_TRNS, KC_UP, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+		BL_BRTG, KC_LEFT, KC_DOWN, KC_RGHT, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+		BL_INC,  BL_DEC,  BL_TOGG, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+		KC_GRV, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RESET, KC_TRNS, KC_TRNS, KC_TRNS
+    )
+};

keyboards/cannonkeys/chimera65/keymaps/via/rules.mk

@@ -0,0 +1,5 @@
+# rules.mk overrides to enable VIA
+
+RAW_ENABLE = yes
+DYNAMIC_KEYMAP_ENABLE = yes
+

keyboards/cannonkeys/chimera65/mcuconf.h

@@ -0,0 +1,176 @@
+/*
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+#ifndef _MCUCONF_H_
+#define _MCUCONF_H_
+
+/*
+ * STM32F0xx drivers configuration.
+ * The following settings override the default settings present in
+ * the various device driver implementation headers.
+ * Note that the settings for each driver only have effect if the whole
+ * driver is enabled in halconf.h.
+ *
+ * IRQ priorities:
+ * 3...0       Lowest...Highest.
+ *
+ * DMA priorities:
+ * 0...3        Lowest...Highest.
+ */
+
+#define STM32F0xx_MCUCONF
+// #define STM32F070xB
+
+/*
+ * HAL driver system settings.
+ */
+#define STM32_NO_INIT                       FALSE
+#define STM32_PVD_ENABLE                    FALSE
+#define STM32_PLS                           STM32_PLS_LEV0
+#define STM32_HSI_ENABLED                   TRUE
+#define STM32_HSI14_ENABLED                 TRUE
+#define STM32_HSI48_ENABLED                 FALSE
+#define STM32_LSI_ENABLED                   TRUE
+#define STM32_HSE_ENABLED                   FALSE
+#define STM32_LSE_ENABLED                   FALSE
+#define STM32_SW                            STM32_SW_PLL
+#define STM32_PLLSRC                        STM32_PLLSRC_HSI_DIV2
+#define STM32_PREDIV_VALUE                  1
+#define STM32_PLLMUL_VALUE                  12
+#define STM32_HPRE                          STM32_HPRE_DIV1
+#define STM32_PPRE                          STM32_PPRE_DIV1
+#define STM32_ADCSW                         STM32_ADCSW_HSI14
+#define STM32_ADCPRE                        STM32_ADCPRE_DIV4
+#define STM32_MCOSEL                        STM32_MCOSEL_NOCLOCK
+#define STM32_ADCPRE                        STM32_ADCPRE_DIV4
+#define STM32_ADCSW                         STM32_ADCSW_HSI14
+#define STM32_USBSW                         STM32_USBSW_HSI48
+#define STM32_CECSW                         STM32_CECSW_HSI
+#define STM32_I2C1SW                        STM32_I2C1SW_HSI
+#define STM32_USART1SW                      STM32_USART1SW_PCLK
+#define STM32_RTCSEL                        STM32_RTCSEL_LSI
+
+/*
+ * ADC driver system settings.
+ */
+#define STM32_ADC_USE_ADC1                  FALSE
+#define STM32_ADC_ADC1_DMA_PRIORITY         2
+#define STM32_ADC_IRQ_PRIORITY              2
+#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY     2
+
+/*
+ * EXT driver system settings.
+ */
+#define STM32_EXT_EXTI0_1_IRQ_PRIORITY      3
+#define STM32_EXT_EXTI2_3_IRQ_PRIORITY      3
+#define STM32_EXT_EXTI4_15_IRQ_PRIORITY     3
+#define STM32_EXT_EXTI16_IRQ_PRIORITY       3
+#define STM32_EXT_EXTI17_IRQ_PRIORITY       3
+
+/*
+ * GPT driver system settings.
+ */
+#define STM32_GPT_USE_TIM1                  FALSE
+#define STM32_GPT_USE_TIM2                  FALSE
+#define STM32_GPT_USE_TIM3                  FALSE
+#define STM32_GPT_USE_TIM14                 FALSE
+#define STM32_GPT_TIM1_IRQ_PRIORITY         2
+#define STM32_GPT_TIM2_IRQ_PRIORITY         2
+#define STM32_GPT_TIM3_IRQ_PRIORITY         2
+#define STM32_GPT_TIM14_IRQ_PRIORITY        2
+
+/*
+ * I2C driver system settings.
+ */
+#define STM32_I2C_USE_I2C1                  TRUE
+#define STM32_I2C_USE_I2C2                  FALSE
+#define STM32_I2C_BUSY_TIMEOUT              50
+#define STM32_I2C_I2C1_IRQ_PRIORITY         3
+#define STM32_I2C_I2C2_IRQ_PRIORITY         3
+#define STM32_I2C_USE_DMA                   TRUE
+#define STM32_I2C_I2C1_DMA_PRIORITY         1
+#define STM32_I2C_I2C2_DMA_PRIORITY         1
+#define STM32_I2C_I2C1_RX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 7)
+#define STM32_I2C_I2C1_TX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 6)
+#define STM32_I2C_DMA_ERROR_HOOK(i2cp)      osalSysHalt("DMA failure")
+
+/*
+ * ICU driver system settings.
+ */
+#define STM32_ICU_USE_TIM1                  FALSE
+#define STM32_ICU_USE_TIM2                  FALSE
+#define STM32_ICU_USE_TIM3                  FALSE
+#define STM32_ICU_TIM1_IRQ_PRIORITY         3
+#define STM32_ICU_TIM2_IRQ_PRIORITY         3
+#define STM32_ICU_TIM3_IRQ_PRIORITY         3
+
+/*
+ * PWM driver system settings.
+ */
+#define STM32_PWM_USE_ADVANCED              FALSE
+#define STM32_PWM_USE_TIM1                  FALSE
+#define STM32_PWM_USE_TIM2                  FALSE
+#define STM32_PWM_USE_TIM3                  TRUE
+#define STM32_PWM_TIM1_IRQ_PRIORITY         3
+#define STM32_PWM_TIM2_IRQ_PRIORITY         3
+#define STM32_PWM_TIM3_IRQ_PRIORITY         3
+
+/*
+ * SERIAL driver system settings.
+ */
+#define STM32_SERIAL_USE_USART1             FALSE
+#define STM32_SERIAL_USE_USART2             FALSE
+#define STM32_SERIAL_USART1_PRIORITY        3
+#define STM32_SERIAL_USART2_PRIORITY        3
+
+/*
+ * SPI driver system settings.
+ */
+#define STM32_SPI_USE_SPI1                  FALSE
+#define STM32_SPI_USE_SPI2                  TRUE
+#define STM32_SPI_SPI1_DMA_PRIORITY         1
+#define STM32_SPI_SPI2_DMA_PRIORITY         1
+#define STM32_SPI_SPI1_IRQ_PRIORITY         2
+#define STM32_SPI_SPI2_IRQ_PRIORITY         2
+#define STM32_SPI_SPI2_RX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 4)
+#define STM32_SPI_SPI2_TX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 5)
+#define STM32_SPI_DMA_ERROR_HOOK(spip)      osalSysHalt("DMA failure")
+
+/*
+ * ST driver system settings.
+ */
+#define STM32_ST_IRQ_PRIORITY               2
+#define STM32_ST_USE_TIMER                  2
+
+/*
+ * UART driver system settings.
+ */
+#define STM32_UART_USE_USART1               FALSE
+#define STM32_UART_USE_USART2               FALSE
+#define STM32_UART_USART1_IRQ_PRIORITY      3
+#define STM32_UART_USART2_IRQ_PRIORITY      3
+#define STM32_UART_USART1_DMA_PRIORITY      0
+#define STM32_UART_USART2_DMA_PRIORITY      0
+#define STM32_UART_DMA_ERROR_HOOK(uartp)    osalSysHalt("DMA failure")
+
+/*
+ * USB driver system settings.
+ */
+#define STM32_USB_USE_USB1                  TRUE
+#define STM32_USB_LOW_POWER_ON_SUSPEND      FALSE
+#define STM32_USB_USB1_LP_IRQ_PRIORITY      3
+
+#endif /* _MCUCONF_H_ */

keyboards/cannonkeys/chimera65/readme.md

@@ -0,0 +1,12 @@
+# Chimera65
+
+Chimera65 Keyboard
+
+Keyboard Maintainer: [Andrew Kannan](https://github.com/awkannan)  
+Hardware Supported: STM32F072CBT6  
+
+Make example for this keyboard (after setting up your build environment):
+
+    make cannonkeys/chimera65:default
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

keyboards/cannonkeys/chimera65/rules.mk

@@ -0,0 +1,57 @@
+# project specific files
+# SRC = ssd1306.c
+## chip/board settings
+# the next two should match the directories in
+#  <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)
+MCU_FAMILY = STM32
+MCU_SERIES = STM32F0xx
+# linker script to use
+# it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/
+#  or <this_dir>/ld/
+MCU_LDSCRIPT = STM32F072xB
+# startup code to use
+# is should exist in <chibios>/os/common/ports/ARMCMx/compilers/GCC/mk/
+MCU_STARTUP = stm32f0xx
+# it should exist either in <chibios>/os/hal/boards/
+#  or <this_dir>/boards
+BOARD = ST_STM32F072B_DISCOVERY
+# Cortex version
+# Teensy LC is cortex-m0; Teensy 3.x are cortex-m4
+MCU  = cortex-m0
+# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7
+ARMV = 6
+# If you want to be able to jump to bootloader from firmware on STM32 MCUs,
+# set the correct BOOTLOADER_ADDRESS. Either set it here, or define it in
+# ./bootloader_defs.h or in ./boards/<FOO>/bootloader_defs.h (if you have
+# a custom board definition that you plan to reuse).
+# If you're not setting it here, leave it commented out.
+# It is chip dependent, the correct number can be looked up here (page 175):
+# http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf
+# This also requires a patch to chibios:
+#   <tmk_dir>/tmk_core/tool/chibios/ch-bootloader-jump.patch
+#STM32_BOOTLOADER_ADDRESS = 0x1FFFC800
+
+# Build Options
+#   comment out to disable the options.
+#
+
+# project specific files
+VPATH += keyboards/cannonkeys/stm32f072
+SRC =	keyboard.c \
+      led.c
+
+DFU_ARGS = -d 0483:df11 -a 0 -s 0x08000000:leave
+
+#BOOTMAGIC_ENABLE = yes	# Virtual DIP switch configuration
+MOUSEKEY_ENABLE = yes	# Mouse keys
+EXTRAKEY_ENABLE = yes	# Audio control and System control
+CONSOLE_ENABLE = yes	# Console for debug
+COMMAND_ENABLE = yes    # Commands for debug and configuration
+SLEEP_LED_ENABLE = yes  # Breathing sleep LED during USB suspend
+NKRO_ENABLE = yes	    # USB Nkey Rollover
+CUSTOM_MATRIX = no # Custom matrix file
+# BACKLIGHT_ENABLE = yes # This is broken on 072 for some reason
+RGBLIGHT_ENABLE = no
+
+# RAW_ENABLE = yes
+# DYNAMIC_KEYMAP_ENABLE = yes

keyboards/cannonkeys/satisfaction75/config.h

@@ -71,15 +71,15 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 // TODO: refactor with new user EEPROM code (coming soon)
 #define EEPROM_MAGIC 0x451F
-#define EEPROM_MAGIC_ADDR 32
+#define EEPROM_MAGIC_ADDR 40
 // Bump this every time we change what we store
 // This will automatically reset the EEPROM with defaults
 // and avoid loading invalid data from the EEPROM
 #define EEPROM_VERSION 0x01
-#define EEPROM_VERSION_ADDR 34
+#define EEPROM_VERSION_ADDR 42
 
 // Dynamic keymap starts after EEPROM version
-#define DYNAMIC_KEYMAP_EEPROM_ADDR 35
+#define DYNAMIC_KEYMAP_EEPROM_ADDR 43
 
 // Dynamic macro starts after dynamic keymaps (35+(4*6*16*2)) = (35+768) = 803
 
@@ -89,13 +89,13 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 // 1 for OLED default mode
 // 6 for 3x custom encoder settings, left, right, and press (18 total)
 
-#define DYNAMIC_KEYMAP_ENABLED_ENCODER_MODES 803
+#define DYNAMIC_KEYMAP_ENABLED_ENCODER_MODES 811
-#define DYNAMIC_KEYMAP_CUSTOM_BACKLIGHT 804
+#define DYNAMIC_KEYMAP_CUSTOM_BACKLIGHT 812
-#define DYNAMIC_KEYMAP_DEFAULT_OLED 805
+#define DYNAMIC_KEYMAP_DEFAULT_OLED 813
-#define DYNAMIC_KEYMAP_CUSTOM_ENCODER 806
+#define DYNAMIC_KEYMAP_CUSTOM_ENCODER 814
 
-#define DYNAMIC_KEYMAP_MACRO_EEPROM_ADDR 824
+#define DYNAMIC_KEYMAP_MACRO_EEPROM_ADDR 832
-#define DYNAMIC_KEYMAP_MACRO_EEPROM_SIZE 200
+#define DYNAMIC_KEYMAP_MACRO_EEPROM_SIZE 192
 #define DYNAMIC_KEYMAP_MACRO_COUNT 16
 
 

keyboards/cannonkeys/satisfaction75/satisfaction75.c

@@ -94,51 +94,53 @@ void raw_hid_receive( uint8_t *data, uint8_t length )
 		}
 		case id_get_keyboard_value:
 		{
-      switch( command_data[0])
+            switch( command_data[0])
-      {
+            {
-        case id_uptime:
+                case id_uptime:
-        {
+                {
-          uint32_t value = timer_read32();
+                uint32_t value = timer_read32();
-          command_data[1] = (value >> 24 ) & 0xFF;
+                command_data[1] = (value >> 24 ) & 0xFF;
-          command_data[2] = (value >> 16 ) & 0xFF;
+                command_data[2] = (value >> 16 ) & 0xFF;
-          command_data[3] = (value >> 8 ) & 0xFF;
+                command_data[3] = (value >> 8 ) & 0xFF;
-          command_data[4] = value & 0xFF;
+                command_data[4] = value & 0xFF;
-          break;
+                break;
-        }
+                }
-        case id_oled_default_mode:
+                case id_oled_default_mode:
-        {
+                {
-          uint8_t default_oled = eeprom_read_byte((uint8_t*)DYNAMIC_KEYMAP_DEFAULT_OLED);
+                    uint8_t default_oled = eeprom_read_byte((uint8_t*)DYNAMIC_KEYMAP_DEFAULT_OLED);
-          command_data[1] = default_oled;
+                    command_data[1] = default_oled;
-          break;
+                    break;
-        }
+                }
-        case id_oled_mode:
+                case id_oled_mode:
-        {
+                {
-          command_data[1] = oled_mode;
+                    command_data[1] = oled_mode;
-          break;
+                    break;
-
+                }
-        }
+                case id_encoder_modes:
-        case id_encoder_modes:
+                {
-        {
+                    command_data[1] = enabled_encoder_modes;
-          command_data[1] = enabled_encoder_modes;
+                    break;
-          break;
+                }
-        }
+                case id_encoder_custom:
-        case id_encoder_custom:
+                {
-        {
+                    uint8_t custom_encoder_idx = command_data[1];
-          // uint8_t custom_encoder_idx = command_data[1];
+                    uint16_t keycode = retrieve_custom_encoder_config(custom_encoder_idx, ENC_CUSTOM_CW);
-          // command_data[2] = 0x00;
+                    command_data[2] =  keycode >> 8;
-          // command_data[3] = 0x00;
+                    command_data[3] = keycode & 0xFF;
-          // command_data[4] = 0x00;
+                    keycode = retrieve_custom_encoder_config(custom_encoder_idx, ENC_CUSTOM_CCW);
-          // command_data[5] = 0x00;
+                    command_data[4] =  keycode >> 8;
-          // command_data[6] = 0x00;
+                    command_data[5] = keycode & 0xFF;
-          // command_data[7] = 0x00;
+                    keycode = retrieve_custom_encoder_config(custom_encoder_idx, ENC_CUSTOM_PRESS);
-          break;
+                    command_data[6] =  keycode >> 8;
-        }
+                    command_data[7] = keycode & 0xFF;
-        default:
+                    break;
-        {
+                }
-          *command_id = id_unhandled;
+                default:
-          break;
+                {
-        }
+                    *command_id = id_unhandled;
-      }
+                    break;
+                }
+            }
 			break;
     }
 #ifdef DYNAMIC_KEYMAP_ENABLE
@@ -164,7 +166,10 @@ void raw_hid_receive( uint8_t *data, uint8_t length )
         }
         case id_encoder_custom:
         {
-          // uint8_t custom_encoder_idx = command_data[1];
+          uint8_t custom_encoder_idx = command_data[1];
+          uint8_t encoder_behavior = command_data[2];
+          uint16_t keycode = (command_data[3] << 8) | command_data[4];
+          set_custom_encoder_config(custom_encoder_idx, encoder_behavior, keycode);
           break;
         }
         default:
@@ -205,13 +210,6 @@ void raw_hid_receive( uint8_t *data, uint8_t length )
 			break;
 		}
 		case id_dynamic_keymap_macro_get_buffer:
-		{
-			uint16_t offset = ( command_data[0] << 8 ) | command_data[1];
-			uint16_t size = command_data[2]; // size <= 28
-			dynamic_keymap_macro_get_buffer( offset, size, &command_data[3] );
-			break;
-		}
-		case id_dynamic_keymap_macro_set_buffer:
 		{
 			uint16_t offset = ( command_data[0] << 8 ) | command_data[1];
 			uint16_t size = command_data[2]; // size <= 28
@@ -339,9 +337,9 @@ bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
         uint16_t mapped_code = handle_encoder_press();
         uint16_t held_keycode_timer = timer_read();
         if(mapped_code != 0){
-          register_code(mapped_code);
+          register_code16(mapped_code);
           while (timer_elapsed(held_keycode_timer) < MEDIA_KEY_DELAY){ /* no-op */ }
-          unregister_code(mapped_code);
+          unregister_code16(mapped_code);
         }
       } else {
         // Do something else when release
@@ -380,9 +378,9 @@ void encoder_update_kb(uint8_t index, bool clockwise) {
       }
       uint16_t held_keycode_timer = timer_read();
       if(mapped_code != 0){
-        register_code(mapped_code);
+        register_code16(mapped_code);
         while (timer_elapsed(held_keycode_timer) < MEDIA_KEY_DELAY){ /* no-op */ }
-        unregister_code(mapped_code);
+        unregister_code16(mapped_code);
       }
     } else {
       if(clockwise){

keyboards/cannonkeys/satisfaction75/satisfaction75.h

@@ -47,6 +47,12 @@ enum encoder_modes {
   ENC_MODE_CLOCK_SET // This shouldn't be included in the default modes, so we put it after NUM_ENCODER_MODES
 };
 
+enum custom_encoder_behavior {
+    ENC_CUSTOM_CW = 0,
+    ENC_CUSTOM_CCW,
+    ENC_CUSTOM_PRESS
+};
+
 enum oled_modes {
   OLED_DEFAULT,
   OLED_TIME,
@@ -96,6 +102,8 @@ void change_encoder_mode(bool negative);
 uint16_t handle_encoder_clockwise(void);
 uint16_t handle_encoder_ccw(void);
 uint16_t handle_encoder_press(void);
+uint16_t retrieve_custom_encoder_config(uint8_t encoder_idx, uint8_t behavior);
+void set_custom_encoder_config(uint8_t encoder_idx, uint8_t behavior, uint16_t new_code);
 
 void update_time_config(int8_t increment);
 

keyboards/cannonkeys/satisfaction75/satisfaction_encoder.c

@@ -1,4 +1,5 @@
 #include "satisfaction75.h"
+#include "tmk_core/common/eeprom.h"
 
 void pre_encoder_mode_change(){
   if(encoder_mode == ENC_MODE_CLOCK_SET){
@@ -111,6 +112,17 @@ uint16_t handle_encoder_clockwise(){
     case ENC_MODE_BRIGHTNESS:
       mapped_code = KC_BRIGHTNESS_UP;
       break;
+#ifdef DYNAMIC_KEYMAP_ENABLE
+    case ENC_MODE_CUSTOM0:
+      mapped_code = retrieve_custom_encoder_config(0, ENC_CUSTOM_CW);
+      break;
+    case ENC_MODE_CUSTOM1:
+      mapped_code = retrieve_custom_encoder_config(1, ENC_CUSTOM_CW);
+      break;
+    case ENC_MODE_CUSTOM2:
+      mapped_code = retrieve_custom_encoder_config(2, ENC_CUSTOM_CW);
+      break;
+#endif
     case ENC_MODE_CLOCK_SET:
       update_time_config(1);
       queue_for_send = true;
@@ -145,6 +157,18 @@ uint16_t handle_encoder_ccw(){
     case ENC_MODE_BRIGHTNESS:
       mapped_code = KC_BRIGHTNESS_DOWN;
       break;
+#ifdef DYNAMIC_KEYMAP_ENABLE
+    case ENC_MODE_CUSTOM0:
+      mapped_code = retrieve_custom_encoder_config(0, ENC_CUSTOM_CCW);
+      break;
+    case ENC_MODE_CUSTOM1:
+      mapped_code = retrieve_custom_encoder_config(1, ENC_CUSTOM_CCW);
+      break;
+    case ENC_MODE_CUSTOM2:
+      mapped_code = retrieve_custom_encoder_config(2, ENC_CUSTOM_CCW);
+      break;
+#endif
+
     case ENC_MODE_CLOCK_SET:
       update_time_config(-1);
       queue_for_send = true;
@@ -159,6 +183,7 @@ uint16_t handle_encoder_press(){
     case ENC_MODE_VOLUME:
       mapped_code = KC_MUTE;
       break;
+    default:
     case ENC_MODE_MEDIA:
       mapped_code = KC_MEDIA_PLAY_PAUSE;
       break;
@@ -174,11 +199,42 @@ uint16_t handle_encoder_press(){
         breathing_enable();
       }
       break;
+#ifdef DYNAMIC_KEYMAP_ENABLE
+    case ENC_MODE_CUSTOM0:
+      mapped_code = retrieve_custom_encoder_config(0, ENC_CUSTOM_PRESS);
+      break;
+    case ENC_MODE_CUSTOM1:
+      mapped_code = retrieve_custom_encoder_config(1, ENC_CUSTOM_PRESS);
+      break;
+    case ENC_MODE_CUSTOM2:
+      mapped_code = retrieve_custom_encoder_config(2, ENC_CUSTOM_PRESS);
+      break;
+#endif
     case ENC_MODE_CLOCK_SET:
       time_config_idx = (time_config_idx + 1) % 5;
-    default:
     case ENC_MODE_BRIGHTNESS:
       break;
   }
   return mapped_code;
 }
+
+
+uint16_t retrieve_custom_encoder_config(uint8_t encoder_idx, uint8_t behavior){
+#ifdef DYNAMIC_KEYMAP_ENABLE
+    void* addr = (void*)(DYNAMIC_KEYMAP_CUSTOM_ENCODER + (encoder_idx * 6) + (behavior * 2));
+    //big endian
+    uint16_t keycode = eeprom_read_byte(addr) << 8;
+    keycode |= eeprom_read_byte(addr + 1);
+    return keycode;
+#else
+    return 0;
+#endif
+}
+
+void set_custom_encoder_config(uint8_t encoder_idx, uint8_t behavior, uint16_t new_code){
+#ifdef DYNAMIC_KEYMAP_ENABLE
+    void* addr = (void*)(DYNAMIC_KEYMAP_CUSTOM_ENCODER + (encoder_idx * 6) + (behavior * 2));
+    eeprom_update_byte(addr, (uint8_t)(new_code >> 8));
+    eeprom_update_byte(addr + 1, (uint8_t)(new_code & 0xFF));
+#endif
+}

keyboards/cannonkeys/stm32f072/keyboard.c

@@ -86,10 +86,9 @@ void matrix_init_board(void);
 void matrix_init_kb(void){
   	eeprom_init_kb();
       /* MOSI pin*/
+#ifdef RGBLIGHT_ENABLE
     palSetPadMode(PORT_WS2812, PIN_WS2812, PAL_MODE_ALTERNATE(0));
     wait_ms(500);
-
-#ifdef RGBLIGHT_ENABLE
     leds_init();
 #endif
     backlight_init_ports();

keyboards/chimera_ergo/chimera_ergo.h

@@ -2,9 +2,6 @@
 #define CHIMERA_ERGO_H
 
 #include "quantum.h"
-#include "matrix.h"
-#include "backlight.h"
-#include <stddef.h>
 
 #define red_led_off   PORTF |= (1<<5)
 #define red_led_on    PORTF &= ~(1<<5)

keyboards/chimera_ls/chimera_ls.h

@@ -2,9 +2,6 @@
 #define CHIMERA_LETS_SPLIT_H
 
 #include "quantum.h"
-#include "matrix.h"
-#include "backlight.h"
-#include <stddef.h>
 
 #define red_led_off   PORTF |= (1<<5)
 #define red_led_on    PORTF &= ~(1<<5)

keyboards/chimera_ortho/chimera_ortho.h

@@ -2,9 +2,6 @@
 #define CHIMERA_ORTHO_H
 
 #include "quantum.h"
-#include "matrix.h"
-#include "backlight.h"
-#include <stddef.h>
 
 #define red_led_off   PORTF |= (1<<5)
 #define red_led_on    PORTF &= ~(1<<5)

keyboards/clueboard/2x1800/rules.mk

@@ -1,11 +1,15 @@
-# MCU details
+# MCU name
 MCU = at90usb1286
-F_CPU = 16000000
-ARCH = AVR8
-F_USB = $(F_CPU)
-OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
-OPT_DEFS += -DBOOTLOADER_SIZE=1024
 
+# Bootloader selection
+#   Teensy       halfkay
+#   Pro Micro    caterina
+#   Atmel DFU    atmel-dfu
+#   LUFA DFU     lufa-dfu
+#   QMK DFU      qmk-dfu
+#   ATmega32A    bootloadHID
+#   ATmega328P   USBasp
+BOOTLOADER = halfkay
 
 # Build Options
 BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration(+1000)

keyboards/comet46/comet46.h

@@ -2,9 +2,6 @@
 #define COMET46_H
 
 #include "quantum.h"
-#include "matrix.h"
-#include "backlight.h"
-#include <stddef.h>
 
 // This a shortcut to help you visually see your layout.
 // The first section contains all of the arguements

keyboards/converter/modelm101/rules.mk

@@ -1,63 +1,16 @@
 # MCU name
 MCU = at90usb1286
 
-# Processor frequency.
-#     This will define a symbol, F_CPU, in all source code files equal to the
-#     processor frequency in Hz. You can then use this symbol in your source code to
-#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
-#     automatically to create a 32-bit value in your source code.
-#
-#     This will be an integer division of F_USB below, as it is sourced by
-#     F_USB after it has run through any CPU prescalers. Note that this value
-#     does not *change* the processor frequency - it should merely be updated to
-#     reflect the processor speed set externally so that the code can use accurate
-#     software delays.
-F_CPU = 16000000
-
-
-#
-# LUFA specific
-#
-# Target architecture (see library "Board Types" documentation).
-ARCH = AVR8
-
-# Input clock frequency.
-#     This will define a symbol, F_USB, in all source code files equal to the
-#     input clock frequency (before any prescaling is performed) in Hz. This value may
-#     differ from F_CPU if prescaling is used on the latter, and is required as the
-#     raw input clock is fed directly to the PLL sections of the AVR for high speed
-#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
-#     at the end, this will be done automatically to create a 32-bit value in your
-#     source code.
-#
-#     If no clock division is performed on the input clock inside the AVR (via the
-#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
-F_USB = $(F_CPU)
-
-# Interrupt driven control endpoint task(+60)
-OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
-
-
 # Bootloader selection
 #   Teensy       halfkay
 #   Pro Micro    caterina
 #   Atmel DFU    atmel-dfu
 #   LUFA DFU     lufa-dfu
 #   QMK DFU      qmk-dfu
-#   atmega32a    bootloadHID
+#   ATmega32A    bootloadHID
+#   ATmega328P   USBasp
 BOOTLOADER = halfkay
 
-
-# If you don't know the bootloader type, then you can specify the
-# Boot Section Size in *bytes* by uncommenting out the OPT_DEFS line
-#   Teensy halfKay      512
-#   Teensy++ halfKay    1024
-#   Atmel DFU loader    4096
-#   LUFA bootloader     4096
-#   USBaspLoader        2048
-#OPT_DEFS += -DBOOTLOADER_SIZE=1024
-
-
 # Build Options
 #   change yes to no to disable
 #

keyboards/copenhagen_click/click_pad_v1/click_pad_v1.c

@@ -0,0 +1,16 @@
+/* Copyright 2019 mini-ninja-64
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include "click_pad_v1.h"

keyboards/copenhagen_click/click_pad_v1/click_pad_v1.h

@@ -0,0 +1,28 @@
+/* Copyright 2019 mini-ninja-64
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#pragma once
+
+#include "quantum.h"
+
+/* This a shortcut to help you visually see your layout.
+ *
+ * The first section contains all of the arguments representing the physical
+ * layout of the board and position of the keys.
+ *
+ * The second converts the arguments into a two-dimensional array which
+ * represents the switch matrix.
+ */
+#define LAYOUT( k00 ) { { k00 } }

keyboards/copenhagen_click/click_pad_v1/config.h

@@ -0,0 +1,251 @@
+/*
+Copyright 2019 mini-ninja-64
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0xFEED
+#define PRODUCT_ID      0x27DB
+#define DEVICE_VER      0x0001
+#define MANUFACTURER    Copenhagen Click
+#define PRODUCT         Click Pad V1
+#define DESCRIPTION     A single switch macropad given out at the Copenhagen Click 2019 meetup.
+
+/* key matrix size */
+#define MATRIX_ROWS 1
+#define MATRIX_COLS 1
+
+/*
+ * Keyboard Matrix Assignments
+ *
+ * Change this to how you wired your keyboard
+ * COLS: AVR pins used for columns, left to right
+ * ROWS: AVR pins used for rows, top to bottom
+ * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
+ *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
+ *
+*/
+#define MATRIX_ROW_PINS { B5 }
+#define MATRIX_COL_PINS { B4 }
+#define UNUSED_PINS
+
+/* COL2ROW, ROW2COL*/
+#define DIODE_DIRECTION COL2ROW
+
+/*
+ * Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN.
+ */
+#define SOFT_SERIAL_PIN D0 // or D1, D2, D3, E6
+
+#define BACKLIGHT_PIN E6
+#define BACKLIGHT_BREATHING
+#define BACKLIGHT_LEVELS 3
+
+// #define RGB_DI_PIN E2
+// #ifdef RGB_DI_PIN
+//   #define RGBLED_NUM 16
+//   #define RGBLIGHT_HUE_STEP 8
+//   #define RGBLIGHT_SAT_STEP 8
+//   #define RGBLIGHT_VAL_STEP 8
+//   #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
+//   #define RGBLIGHT_SLEEP  /* If defined, the RGB lighting will be switched off when the host goes to sleep */
+// /*== all animations enable ==*/
+//   #define RGBLIGHT_ANIMATIONS
+// /*== or choose animations ==*/
+//   #define RGBLIGHT_EFFECT_BREATHING
+//   #define RGBLIGHT_EFFECT_RAINBOW_MOOD
+//   #define RGBLIGHT_EFFECT_RAINBOW_SWIRL
+//   #define RGBLIGHT_EFFECT_SNAKE
+//   #define RGBLIGHT_EFFECT_KNIGHT
+//   #define RGBLIGHT_EFFECT_CHRISTMAS
+//   #define RGBLIGHT_EFFECT_STATIC_GRADIENT
+//   #define RGBLIGHT_EFFECT_RGB_TEST
+//   #define RGBLIGHT_EFFECT_ALTERNATING
+// /*== customize breathing effect ==*/
+//   /*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
+//   #define RGBLIGHT_BREATHE_TABLE_SIZE 256      // 256(default) or 128 or 64
+//   /*==== use exp() and sin() ====*/
+//   #define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85  // 1 to 2.7
+//   #define RGBLIGHT_EFFECT_BREATHE_MAX    255   // 0 to 255
+// #endif
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCE 5
+
+/* define if matrix has ghost (lacks anti-ghosting diodes) */
+//#define MATRIX_HAS_GHOST
+
+/* number of backlight levels */
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
+ * This is userful for the Windows task manager shortcut (ctrl+shift+esc).
+ */
+// #define GRAVE_ESC_CTRL_OVERRIDE
+
+/*
+ * Force NKRO
+ *
+ * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
+ * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
+ * makefile for this to work.)
+ *
+ * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
+ * until the next keyboard reset.
+ *
+ * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
+ * fully operational during normal computer usage.
+ *
+ * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
+ * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
+ * bootmagic, NKRO mode will always be enabled until it is toggled again during a
+ * power-up.
+ *
+ */
+//#define FORCE_NKRO
+
+/*
+ * Magic Key Options
+ *
+ * Magic keys are hotkey commands that allow control over firmware functions of
+ * the keyboard. They are best used in combination with the HID Listen program,
+ * found here: https://www.pjrc.com/teensy/hid_listen.html
+ *
+ * The options below allow the magic key functionality to be changed. This is
+ * useful if your keyboard/keypad is missing keys and you want magic key support.
+ *
+ */
+
+/* key combination for magic key command */
+/* defined by default; to change, uncomment and set to the combination you want */
+// #define IS_COMMAND() (get_mods() == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)))
+
+/* control how magic key switches layers */
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS  true
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS  true
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false
+
+/* override magic key keymap */
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM
+//#define MAGIC_KEY_HELP           H
+//#define MAGIC_KEY_HELP_ALT       SLASH
+//#define MAGIC_KEY_DEBUG          D
+//#define MAGIC_KEY_DEBUG_MATRIX   X
+//#define MAGIC_KEY_DEBUG_KBD      K
+//#define MAGIC_KEY_DEBUG_MOUSE    M
+//#define MAGIC_KEY_VERSION        V
+//#define MAGIC_KEY_STATUS         S
+//#define MAGIC_KEY_CONSOLE        C
+//#define MAGIC_KEY_LAYER0         0
+//#define MAGIC_KEY_LAYER0_ALT     GRAVE
+//#define MAGIC_KEY_LAYER1         1
+//#define MAGIC_KEY_LAYER2         2
+//#define MAGIC_KEY_LAYER3         3
+//#define MAGIC_KEY_LAYER4         4
+//#define MAGIC_KEY_LAYER5         5
+//#define MAGIC_KEY_LAYER6         6
+//#define MAGIC_KEY_LAYER7         7
+//#define MAGIC_KEY_LAYER8         8
+//#define MAGIC_KEY_LAYER9         9
+//#define MAGIC_KEY_BOOTLOADER     B
+//#define MAGIC_KEY_BOOTLOADER_ALT ESC
+//#define MAGIC_KEY_LOCK           CAPS
+//#define MAGIC_KEY_EEPROM         E
+//#define MAGIC_KEY_EEPROM_CLEAR   BSPACE
+//#define MAGIC_KEY_NKRO           N
+//#define MAGIC_KEY_SLEEP_LED      Z
+
+/*
+ * Feature disable options
+ *  These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+//#define NO_DEBUG
+
+/* disable print */
+//#define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+//#define NO_ACTION_MACRO
+//#define NO_ACTION_FUNCTION
+
+/*
+ * MIDI options
+ */
+
+/* Prevent use of disabled MIDI features in the keymap */
+//#define MIDI_ENABLE_STRICT 1
+
+/* enable basic MIDI features:
+   - MIDI notes can be sent when in Music mode is on
+*/
+//#define MIDI_BASIC
+
+/* enable advanced MIDI features:
+   - MIDI notes can be added to the keymap
+   - Octave shift and transpose
+   - Virtual sustain, portamento, and modulation wheel
+   - etc.
+*/
+//#define MIDI_ADVANCED
+
+/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
+//#define MIDI_TONE_KEYCODE_OCTAVES 1
+
+/*
+ * HD44780 LCD Display Configuration
+ */
+/*
+#define LCD_LINES           2     //< number of visible lines of the display
+#define LCD_DISP_LENGTH    16     //< visibles characters per line of the display
+
+#define LCD_IO_MODE      1            //< 0: memory mapped mode, 1: IO port mode
+
+#if LCD_IO_MODE
+#define LCD_PORT         PORTB        //< port for the LCD lines
+#define LCD_DATA0_PORT   LCD_PORT     //< port for 4bit data bit 0
+#define LCD_DATA1_PORT   LCD_PORT     //< port for 4bit data bit 1
+#define LCD_DATA2_PORT   LCD_PORT     //< port for 4bit data bit 2
+#define LCD_DATA3_PORT   LCD_PORT     //< port for 4bit data bit 3
+#define LCD_DATA0_PIN    4            //< pin for 4bit data bit 0
+#define LCD_DATA1_PIN    5            //< pin for 4bit data bit 1
+#define LCD_DATA2_PIN    6            //< pin for 4bit data bit 2
+#define LCD_DATA3_PIN    7            //< pin for 4bit data bit 3
+#define LCD_RS_PORT      LCD_PORT     //< port for RS line
+#define LCD_RS_PIN       3            //< pin  for RS line
+#define LCD_RW_PORT      LCD_PORT     //< port for RW line
+#define LCD_RW_PIN       2            //< pin  for RW line
+#define LCD_E_PORT       LCD_PORT     //< port for Enable line
+#define LCD_E_PIN        1            //< pin  for Enable line
+#endif
+*/
+
+/* Bootmagic Lite key configuration */
+// #define BOOTMAGIC_LITE_ROW 0
+// #define BOOTMAGIC_LITE_COLUMN 0

keyboards/copenhagen_click/click_pad_v1/info.json

@@ -0,0 +1,12 @@
+{
+    "keyboard_name": "CopenhagenClickPad-V1", 
+    "url": "http://copenhagenclick.com/ClickPad-V1/", 
+    "maintainer": "mini-ninja-64", 
+    "width": 1, 
+    "height": 1, 
+    "layouts": {
+        "LAYOUT": {
+            "layout": [{"x":0, "y":0}]
+        }
+    }
+}

keyboards/copenhagen_click/click_pad_v1/keymaps/default/config.h

@@ -0,0 +1,19 @@
+/* Copyright 2019 mini-ninja-64
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+// place overrides here

keyboards/copenhagen_click/click_pad_v1/keymaps/default/keymap.c

@@ -0,0 +1,53 @@
+/* Copyright 2019 mini-ninja-64
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+
+// Defines the keycodes used by our macros in process_record_user
+enum custom_keycodes {
+  COPENHAGEN = SAFE_RANGE
+};
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+  [0] = LAYOUT( COPENHAGEN ),
+};
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+  switch (keycode) {
+    case COPENHAGEN:
+      if (record->event.pressed) {
+        // when keycode COPENHAGEN is pressed
+        SEND_STRING("Copenhagen Click!");
+      } else {
+        // when keycode COPENHAGEN is released
+      }
+      break;
+  }
+  return true;
+}
+
+void matrix_init_user(void) {
+  backlight_enable();
+  breathing_enable();
+
+}
+
+void matrix_scan_user(void) {
+
+}
+
+void led_set_user(uint8_t usb_led) {
+
+}