Add STM32Duino to bootloader selection (#10558)

* Update Japanese document.

* Left justified.

* Update docs/ja/feature_bluetooth.md

Co-authored-by: s-show <s1shimz@gmail.com>

* Update docs/ja/feature_bluetooth.md

Co-authored-by: Takeshi ISHII <2170248+mtei@users.noreply.github.com>

Co-authored-by: s-show <s1shimz@gmail.com>
Co-authored-by: Takeshi ISHII <2170248+mtei@users.noreply.github.com>

bootloader.mk

@@ -28,6 +28,7 @@
 # bootloadHID    HIDBootFlash compatible (ATmega32A)
 # USBasp         USBaspLoader (ATmega328P)
 # kiibohd        Input:Club Kiibohd bootloader (only used on their boards)
+# stm32duino     STM32Duino (STM32F103x8)
 #
 # BOOTLOADER_SIZE can still be defined manually, but it's recommended
 # you add any possible configuration to this list
@@ -106,3 +107,14 @@ ifeq ($(strip $(BOOTLOADER)), kiibohd)
     DFU_ARGS = -d 1C11:B007
     DFU_SUFFIX_ARGS = -v 1C11 -p B007
 endif
+
+ifeq ($(strip $(BOOTLOADER)), stm32duino)
+    OPT_DEFS += -DBOOTLOADER_STM32DUINO
+    MCU_LDSCRIPT ?= STM32F103x8_stm32duino_bootloader
+    BOARD = STM32_F103_STM32DUINO
+    # STM32F103 does NOT have an USB bootloader in ROM (only serial), so setting anything here does not make much sense
+    STM32_BOOTLOADER_ADDRESS = 0x80000000
+
+    DFU_ARGS = -d 1EAF:0003 -a2 -R
+    DFU_SUFFIX_ARGS = -v 1EAF -p 0003
+endif

docs/cli_commands.md

@@ -167,6 +167,17 @@ Creates a keymap.c from a QMK Configurator export.
 qmk json2c [-o OUTPUT] filename
 ```
 
+## `qmk c2json`
+
+Creates a keymap.json from a keymap.c.  
+**Note:** Parsing C source files is not easy, therefore this subcommand may not work your keymap. In some cases not using the C pre-processor helps.
+
+**Usage**:
+
+```
+qmk c2json [--no-cpp] [-o OUTPUT] filename
+```
+
 ## `qmk list-keyboards`
 
 This command lists all the keyboards currently defined in `qmk_firmware`

docs/faq_build.md

@@ -24,12 +24,18 @@ On Linux, you'll need proper privileges to communicate with the bootloader devic
 **/etc/udev/rules.d/50-qmk.rules:**
 ```
 # Atmel DFU
-SUBSYSTEMS=="usb", ATTRS{idVendor}=="03EB", ATTRS{idProduct}=="2FEF", TAG+="uaccess", RUN{builtin}+="uaccess" # ATmega16U2
-SUBSYSTEMS=="usb", ATTRS{idVendor}=="03EB", ATTRS{idProduct}=="2FF0", TAG+="uaccess", RUN{builtin}+="uaccess" # ATmega32U2
-SUBSYSTEMS=="usb", ATTRS{idVendor}=="03EB", ATTRS{idProduct}=="2FF3", TAG+="uaccess", RUN{builtin}+="uaccess" # ATmega16U4
-SUBSYSTEMS=="usb", ATTRS{idVendor}=="03EB", ATTRS{idProduct}=="2FF4", TAG+="uaccess", RUN{builtin}+="uaccess" # ATmega32U4
-SUBSYSTEMS=="usb", ATTRS{idVendor}=="03EB", ATTRS{idProduct}=="2FF9", TAG+="uaccess", RUN{builtin}+="uaccess" # AT90USB64
-SUBSYSTEMS=="usb", ATTRS{idVendor}=="03EB", ATTRS{idProduct}=="2FFB", TAG+="uaccess", RUN{builtin}+="uaccess" # AT90USB128
+### ATmega16U2
+SUBSYSTEMS=="usb", ATTRS{idVendor}=="03EB", ATTRS{idProduct}=="2FEF", TAG+="uaccess", RUN{builtin}+="uaccess"
+### ATmega32U2
+SUBSYSTEMS=="usb", ATTRS{idVendor}=="03EB", ATTRS{idProduct}=="2FF0", TAG+="uaccess", RUN{builtin}+="uaccess"
+### ATmega16U4
+SUBSYSTEMS=="usb", ATTRS{idVendor}=="03EB", ATTRS{idProduct}=="2FF3", TAG+="uaccess", RUN{builtin}+="uaccess"
+### ATmega32U4
+SUBSYSTEMS=="usb", ATTRS{idVendor}=="03EB", ATTRS{idProduct}=="2FF4", TAG+="uaccess", RUN{builtin}+="uaccess"
+### AT90USB64
+SUBSYSTEMS=="usb", ATTRS{idVendor}=="03EB", ATTRS{idProduct}=="2FF9", TAG+="uaccess", RUN{builtin}+="uaccess"
+### AT90USB128
+SUBSYSTEMS=="usb", ATTRS{idVendor}=="03EB", ATTRS{idProduct}=="2FFB", TAG+="uaccess", RUN{builtin}+="uaccess"
 
 # Input Club
 SUBSYSTEMS=="usb", ATTRS{idVendor}=="1C11", ATTRS{idProduct}=="B007", TAG+="uaccess", RUN{builtin}+="uaccess"
@@ -50,22 +56,33 @@ SUBSYSTEMS=="usb", ATTRS{idVendor}=="16C0", ATTRS{idProduct}=="05DC", TAG+="uacc
 SUBSYSTEMS=="usb", ATTRS{idVendor}=="03EB", ATTRS{idProduct}=="6124", TAG+="uaccess", RUN{builtin}+="uaccess", ENV{ID_MM_DEVICE_IGNORE}="1"
 
 # Caterina (Pro Micro)
-#   Spark Fun Electronics
-SUBSYSTEMS=="usb", ATTRS{idVendor}=="1B4F", ATTRS{idProduct}=="9203", TAG+="uaccess", RUN{builtin}+="uaccess", ENV{ID_MM_DEVICE_IGNORE}="1" # Pro Micro 3V3/8MHz
-SUBSYSTEMS=="usb", ATTRS{idVendor}=="1B4F", ATTRS{idProduct}=="9205", TAG+="uaccess", RUN{builtin}+="uaccess", ENV{ID_MM_DEVICE_IGNORE}="1" # Pro Micro 5V/16MHz
-SUBSYSTEMS=="usb", ATTRS{idVendor}=="1B4F", ATTRS{idProduct}=="9207", TAG+="uaccess", RUN{builtin}+="uaccess", ENV{ID_MM_DEVICE_IGNORE}="1" # LilyPad 3V3/8MHz (and some Pro Micro clones)
-#   Pololu Electronics
-SUBSYSTEMS=="usb", ATTRS{idVendor}=="1FFB", ATTRS{idProduct}=="0101", TAG+="uaccess", RUN{builtin}+="uaccess", ENV{ID_MM_DEVICE_IGNORE}="1" # A-Star 32U4
-#   Arduino SA
-SUBSYSTEMS=="usb", ATTRS{idVendor}=="2341", ATTRS{idProduct}=="0036", TAG+="uaccess", RUN{builtin}+="uaccess", ENV{ID_MM_DEVICE_IGNORE}="1" # Leonardo
-SUBSYSTEMS=="usb", ATTRS{idVendor}=="2341", ATTRS{idProduct}=="0037", TAG+="uaccess", RUN{builtin}+="uaccess", ENV{ID_MM_DEVICE_IGNORE}="1" # Micro
-#   Adafruit Industries LLC
-SUBSYSTEMS=="usb", ATTRS{idVendor}=="239A", ATTRS{idProduct}=="000C", TAG+="uaccess", RUN{builtin}+="uaccess", ENV{ID_MM_DEVICE_IGNORE}="1" # Feather 32U4
-SUBSYSTEMS=="usb", ATTRS{idVendor}=="239A", ATTRS{idProduct}=="000D", TAG+="uaccess", RUN{builtin}+="uaccess", ENV{ID_MM_DEVICE_IGNORE}="1" # ItsyBitsy 32U4 3V3/8MHz
-SUBSYSTEMS=="usb", ATTRS{idVendor}=="239A", ATTRS{idProduct}=="000E", TAG+="uaccess", RUN{builtin}+="uaccess", ENV{ID_MM_DEVICE_IGNORE}="1" # ItsyBitsy 32U4 5V/16MHz
-#   dog hunter AG
-SUBSYSTEMS=="usb", ATTRS{idVendor}=="2A03", ATTRS{idProduct}=="0036", TAG+="uaccess", RUN{builtin}+="uaccess", ENV{ID_MM_DEVICE_IGNORE}="1" # Leonardo
-SUBSYSTEMS=="usb", ATTRS{idVendor}=="2A03", ATTRS{idProduct}=="0037", TAG+="uaccess", RUN{builtin}+="uaccess", ENV{ID_MM_DEVICE_IGNORE}="1" # Micro
+## Spark Fun Electronics
+### Pro Micro 3V3/8MHz
+SUBSYSTEMS=="usb", ATTRS{idVendor}=="1B4F", ATTRS{idProduct}=="9203", TAG+="uaccess", RUN{builtin}+="uaccess", ENV{ID_MM_DEVICE_IGNORE}="1"
+### Pro Micro 5V/16MHz
+SUBSYSTEMS=="usb", ATTRS{idVendor}=="1B4F", ATTRS{idProduct}=="9205", TAG+="uaccess", RUN{builtin}+="uaccess", ENV{ID_MM_DEVICE_IGNORE}="1"
+### LilyPad 3V3/8MHz (and some Pro Micro clones)
+SUBSYSTEMS=="usb", ATTRS{idVendor}=="1B4F", ATTRS{idProduct}=="9207", TAG+="uaccess", RUN{builtin}+="uaccess", ENV{ID_MM_DEVICE_IGNORE}="1"
+## Pololu Electronics
+### A-Star 32U4
+SUBSYSTEMS=="usb", ATTRS{idVendor}=="1FFB", ATTRS{idProduct}=="0101", TAG+="uaccess", RUN{builtin}+="uaccess", ENV{ID_MM_DEVICE_IGNORE}="1"
+## Arduino SA
+### Leonardo
+SUBSYSTEMS=="usb", ATTRS{idVendor}=="2341", ATTRS{idProduct}=="0036", TAG+="uaccess", RUN{builtin}+="uaccess", ENV{ID_MM_DEVICE_IGNORE}="1"
+### Micro
+SUBSYSTEMS=="usb", ATTRS{idVendor}=="2341", ATTRS{idProduct}=="0037", TAG+="uaccess", RUN{builtin}+="uaccess", ENV{ID_MM_DEVICE_IGNORE}="1"
+## Adafruit Industries LLC
+### Feather 32U4
+SUBSYSTEMS=="usb", ATTRS{idVendor}=="239A", ATTRS{idProduct}=="000C", TAG+="uaccess", RUN{builtin}+="uaccess", ENV{ID_MM_DEVICE_IGNORE}="1"
+### ItsyBitsy 32U4 3V3/8MHz
+SUBSYSTEMS=="usb", ATTRS{idVendor}=="239A", ATTRS{idProduct}=="000D", TAG+="uaccess", RUN{builtin}+="uaccess", ENV{ID_MM_DEVICE_IGNORE}="1"
+### ItsyBitsy 32U4 5V/16MHz
+SUBSYSTEMS=="usb", ATTRS{idVendor}=="239A", ATTRS{idProduct}=="000E", TAG+="uaccess", RUN{builtin}+="uaccess", ENV{ID_MM_DEVICE_IGNORE}="1"
+## dog hunter AG
+### Leonardo
+SUBSYSTEMS=="usb", ATTRS{idVendor}=="2A03", ATTRS{idProduct}=="0036", TAG+="uaccess", RUN{builtin}+="uaccess", ENV{ID_MM_DEVICE_IGNORE}="1"
+### Micro
+SUBSYSTEMS=="usb", ATTRS{idVendor}=="2A03", ATTRS{idProduct}=="0037", TAG+="uaccess", RUN{builtin}+="uaccess", ENV{ID_MM_DEVICE_IGNORE}="1"
 ```
 
 Once added, run the following:

docs/feature_combo.md

@@ -55,7 +55,7 @@ combo_t key_combos[COMBO_COUNT] = {
   [XV_PASTE] = COMBO_ACTION(paste_combo),
 };
 
-void process_combo_event(uint8_t combo_index, bool pressed) {
+void process_combo_event(uint16_t combo_index, bool pressed) {
   switch(combo_index) {
     case ZC_COPY:
       if (pressed) {

docs/hardware_keyboard_guidelines.md

@@ -192,7 +192,7 @@ When developing your keyboard, keep in mind that all warnings will be treated as
 
 ## Copyright Blurb
 
-If you're adapting your keyboard's setup from another project, but not using the same code, but sure to update the copyright header at the top of the files to show your name, in this format:
+If you're adapting your keyboard's setup from another project, but not using the same code, be sure to update the copyright header at the top of the files to show your name, in this format:
 
     Copyright 2017 Your Name <your@email.com>
 

docs/ja/breaking_changes.md

@@ -2,8 +2,8 @@
 
 <!---
   grep --no-filename "^[ ]*git diff" docs/ja/*.md | sh
-  original document: 0.9.0:docs/breaking_changes.md
-  git diff 0.9.0 HEAD -- docs/breaking_changes.md | cat
+  original document: 0.10.33:docs/breaking_changes.md
+  git diff 0.10.33 HEAD -- docs/breaking_changes.md | cat
 -->
 
 このドキュメントは QMK の互換性を破る変更(Breaking change) のプロセスについて説明します。
@@ -15,22 +15,23 @@ Breaking change ピリオドとは、危険な変更、または予想外の変
 
 ## 過去の Breaking change には何が含まれますか？
 
+* [2020年8月29日](ja/ChangeLog/20200829.md)
 * [2020年5月30日](ja/ChangeLog/20200530.md)
 * [2020年2月29日](ja/ChangeLog/20200229.md)
 * [2019年8月30日](ja/ChangeLog/20190830.md)
 
 ## 次の Breaking change はいつですか？
 
-次の Breaking change は2020年8月29日に予定されています。
+次の Breaking change は2020年11月28日に予定されています。
 
 ### 重要な日付
 
-* [x] 2020年 5月30日 - `develop` が作成されました。毎週リベースされます。
-* [ ] 2020年 8月 1日 - `develop` は新しいPRを取り込みません。
-* [ ] 2020年 8月 1日 - テスターの募集。
-* [ ] 2020年 8月27日 - `master`がロックされ、PR はマージされません。
-* [ ] 2020年 8月29日 - `develop` を `master` にマージします。
-* [ ] 2020年 8月29日 - `master` のロックが解除されます。PR を再びマージすることができます。
+* [x] 2020年 8月29日 - `develop` が作成されました。毎週リベースされます。
+* [ ] 2020年10月31日 - `develop` は新しいPRを取り込みません。
+* [ ] 2020年10月31日 - テスターの募集。
+* [ ] 2020年11月26日 - `master`がロックされ、PR はマージされません。
+* [ ] 2020年11月28日 - `develop` を `master` にマージします。
+* [ ] 2020年11月28日 - `master` のロックが解除されます。PR を再びマージすることができます。
 
 ## どのような変更が含まれますか？
 

docs/ja/faq_build.md

@@ -1,8 +1,8 @@
 # よくあるビルドの質問
 
 <!---
-  original document: 0.9.43:docs/faq_build.md
-  git diff 0.9.43 HEAD -- docs/faq_build.md | cat
+  original document: 0.10.33:docs/faq_build.md
+  git diff 0.10.33 HEAD -- docs/faq_build.md | cat
 -->
 
 このページは QMK のビルドに関する質問を説明します。まだビルドをしていない場合は、[ビルド環境のセットアップ](ja/getting_started_build_tools.md) および [Make 手順](ja/getting_started_make_guide.md)ガイドを読むべきです。
@@ -18,64 +18,93 @@
 
 あるいは、単純に:
 
-    $ sudo make <keyboard>:<keymap>:dfu
+    $ sudo make <keyboard>:<keymap>:flash
 
 `make` を `sudo` で実行することは一般的には良い考えでは***なく***、可能であれば前者の方法のいずれかを使うべきです。
 
 ### Linux の `udev` ルール
-Linux では、MCU にアクセスするには適切な権限が必要です。ファームウェアを書き込む時に `sudo` を使うか、`/etc/udev/rules.d/` にこれらのファイルを配置することで、アクセスすることができます。権限の追加が完了したら、以下を実行します:
-```console
+
+Linux では、ブートローダデバイスと通信するには適切な権限が必要です。ファームウェアを書き込む時に `sudo` を使うか、`/etc/udev/rules.d/` にこのファイルを配置することで、通信することができます。
+
+**/etc/udev/rules.d/50-qmk.rules:**
+```
+# Atmel DFU
+### ATmega16U2
+SUBSYSTEMS=="usb", ATTRS{idVendor}=="03EB", ATTRS{idProduct}=="2FEF", TAG+="uaccess", RUN{builtin}+="uaccess"
+### ATmega32U2
+SUBSYSTEMS=="usb", ATTRS{idVendor}=="03EB", ATTRS{idProduct}=="2FF0", TAG+="uaccess", RUN{builtin}+="uaccess"
+### ATmega16U4
+SUBSYSTEMS=="usb", ATTRS{idVendor}=="03EB", ATTRS{idProduct}=="2FF3", TAG+="uaccess", RUN{builtin}+="uaccess"
+### ATmega32U4
+SUBSYSTEMS=="usb", ATTRS{idVendor}=="03EB", ATTRS{idProduct}=="2FF4", TAG+="uaccess", RUN{builtin}+="uaccess"
+### AT90USB64
+SUBSYSTEMS=="usb", ATTRS{idVendor}=="03EB", ATTRS{idProduct}=="2FF9", TAG+="uaccess", RUN{builtin}+="uaccess"
+### AT90USB128
+SUBSYSTEMS=="usb", ATTRS{idVendor}=="03EB", ATTRS{idProduct}=="2FFB", TAG+="uaccess", RUN{builtin}+="uaccess"
+
+# Input Club
+SUBSYSTEMS=="usb", ATTRS{idVendor}=="1C11", ATTRS{idProduct}=="B007", TAG+="uaccess", RUN{builtin}+="uaccess"
+
+# STM32duino
+SUBSYSTEMS=="usb", ATTRS{idVendor}=="1EAF", ATTRS{idProduct}=="0003", TAG+="uaccess", RUN{builtin}+="uaccess"
+# STM32 DFU
+SUBSYSTEMS=="usb", ATTRS{idVendor}=="0483", ATTRS{idProduct}=="DF11", TAG+="uaccess", RUN{builtin}+="uaccess"
+
+# BootloadHID
+SUBSYSTEMS=="usb", ATTRS{idVendor}=="16C0", ATTRS{idProduct}=="05DF", TAG+="uaccess", RUN{builtin}+="uaccess"
+
+# USBAspLoader
+SUBSYSTEMS=="usb", ATTRS{idVendor}=="16C0", ATTRS{idProduct}=="05DC", TAG+="uaccess", RUN{builtin}+="uaccess"
+
+# ModemManager should ignore the following devices
+# Atmel SAM-BA (Massdrop)
+SUBSYSTEMS=="usb", ATTRS{idVendor}=="03EB", ATTRS{idProduct}=="6124", TAG+="uaccess", RUN{builtin}+="uaccess", ENV{ID_MM_DEVICE_IGNORE}="1"
+
+# Caterina (Pro Micro)
+## Spark Fun Electronics
+### Pro Micro 3V3/8MHz
+SUBSYSTEMS=="usb", ATTRS{idVendor}=="1B4F", ATTRS{idProduct}=="9203", TAG+="uaccess", RUN{builtin}+="uaccess", ENV{ID_MM_DEVICE_IGNORE}="1"
+### Pro Micro 5V/16MHz
+SUBSYSTEMS=="usb", ATTRS{idVendor}=="1B4F", ATTRS{idProduct}=="9205", TAG+="uaccess", RUN{builtin}+="uaccess", ENV{ID_MM_DEVICE_IGNORE}="1"
+### LilyPad 3V3/8MHz (and some Pro Micro clones)
+SUBSYSTEMS=="usb", ATTRS{idVendor}=="1B4F", ATTRS{idProduct}=="9207", TAG+="uaccess", RUN{builtin}+="uaccess", ENV{ID_MM_DEVICE_IGNORE}="1"
+## Pololu Electronics
+### A-Star 32U4
+SUBSYSTEMS=="usb", ATTRS{idVendor}=="1FFB", ATTRS{idProduct}=="0101", TAG+="uaccess", RUN{builtin}+="uaccess", ENV{ID_MM_DEVICE_IGNORE}="1"
+## Arduino SA
+### Leonardo
+SUBSYSTEMS=="usb", ATTRS{idVendor}=="2341", ATTRS{idProduct}=="0036", TAG+="uaccess", RUN{builtin}+="uaccess", ENV{ID_MM_DEVICE_IGNORE}="1"
+### Micro
+SUBSYSTEMS=="usb", ATTRS{idVendor}=="2341", ATTRS{idProduct}=="0037", TAG+="uaccess", RUN{builtin}+="uaccess", ENV{ID_MM_DEVICE_IGNORE}="1"
+## Adafruit Industries LLC
+### Feather 32U4
+SUBSYSTEMS=="usb", ATTRS{idVendor}=="239A", ATTRS{idProduct}=="000C", TAG+="uaccess", RUN{builtin}+="uaccess", ENV{ID_MM_DEVICE_IGNORE}="1"
+### ItsyBitsy 32U4 3V3/8MHz
+SUBSYSTEMS=="usb", ATTRS{idVendor}=="239A", ATTRS{idProduct}=="000D", TAG+="uaccess", RUN{builtin}+="uaccess", ENV{ID_MM_DEVICE_IGNORE}="1"
+### ItsyBitsy 32U4 5V/16MHz
+SUBSYSTEMS=="usb", ATTRS{idVendor}=="239A", ATTRS{idProduct}=="000E", TAG+="uaccess", RUN{builtin}+="uaccess", ENV{ID_MM_DEVICE_IGNORE}="1"
+## dog hunter AG
+### Leonardo
+SUBSYSTEMS=="usb", ATTRS{idVendor}=="2A03", ATTRS{idProduct}=="0036", TAG+="uaccess", RUN{builtin}+="uaccess", ENV{ID_MM_DEVICE_IGNORE}="1"
+### Micro
+SUBSYSTEMS=="usb", ATTRS{idVendor}=="2A03", ATTRS{idProduct}=="0037", TAG+="uaccess", RUN{builtin}+="uaccess", ENV{ID_MM_DEVICE_IGNORE}="1"
+```
+
+追加が完了したら、以下を実行します:
+
+```
 sudo udevadm control --reload-rules
 sudo udevadm trigger
 ```
 
-**/etc/udev/rules.d/50-atmel-dfu.rules:**
-```
-# Atmel ATMega32U4
-SUBSYSTEMS=="usb", ATTRS{idVendor}=="03eb", ATTRS{idProduct}=="2ff4", TAG+="uaccess", RUN{builtin}+="uaccess"
-# Atmel USBKEY AT90USB1287
-SUBSYSTEMS=="usb", ATTRS{idVendor}=="03eb", ATTRS{idProduct}=="2ffb", TAG+="uaccess", RUN{builtin}+="uaccess"
-# Atmel ATMega32U2
-SUBSYSTEMS=="usb", ATTRS{idVendor}=="03eb", ATTRS{idProduct}=="2ff0", TAG+="uaccess", RUN{builtin}+="uaccess"
-```
-
-**/etc/udev/rules.d/54-input-club-keyboard.rules:**
-
-```
-# Input Club keyboard bootloader
-SUBSYSTEMS=="usb", ATTRS{idVendor}=="1c11", ATTRS{idProduct}=="b007", TAG+="uaccess", RUN{builtin}+="uaccess"
-```
-
-**/etc/udev/rules.d/55-caterina.rules:**
-```
-# ModemManager should ignore the following devices
-SUBSYSTEMS=="usb", ATTRS{idVendor}=="2a03", ATTRS{idProduct}=="0036", TAG+="uaccess", RUN{builtin}+="uaccess", ENV{ID_MM_DEVICE_IGNORE}="1"
-SUBSYSTEMS=="usb", ATTRS{idVendor}=="2341", ATTRS{idProduct}=="0036", TAG+="uaccess", RUN{builtin}+="uaccess", ENV{ID_MM_DEVICE_IGNORE}="1"
-SUBSYSTEMS=="usb", ATTRS{idVendor}=="1b4f", ATTRS{idProduct}=="9205", TAG+="uaccess", RUN{builtin}+="uaccess", ENV{ID_MM_DEVICE_IGNORE}="1"
-SUBSYSTEMS=="usb", ATTRS{idVendor}=="1b4f", ATTRS{idProduct}=="9203", TAG+="uaccess", RUN{builtin}+="uaccess", ENV{ID_MM_DEVICE_IGNORE}="1"
-```
-
 **注意:** 古い(1.12以前の) ModemManager では、フィルタリングは厳密なモードではない場合にのみ動作し、以下のコマンドはその設定を更新することができます。
-```console
+
+```
 printf '[Service]\nExecStart=\nExecStart=/usr/sbin/ModemManager --filter-policy=default' | sudo tee /etc/systemd/system/ModemManager.service.d/policy.conf
 sudo systemctl daemon-reload
 sudo systemctl restart ModemManager
 ```
 
-**/etc/udev/rules.d/56-dfu-util.rules:**
-```
-# stm32duino
-SUBSYSTEMS=="usb", ATTRS{idVendor}=="1eaf", ATTRS{idProduct}=="0003", TAG+="uaccess", RUN{builtin}+="uaccess"
-# Generic stm32
-SUBSYSTEMS=="usb", ATTRS{idVendor}=="0483", ATTRS{idProduct}=="df11", TAG+="uaccess", RUN{builtin}+="uaccess"
-```
-
-**/etc/udev/rules.d/57-bootloadhid.rules:**
-```
-# bootloadHID
-SUBSYSTEMS=="usb", ATTRS{idVendor}=="16c0", ATTRS{idProduct}=="05df", TAG+="uaccess", RUN{builtin}+="uaccess"
-```
-
 ### Linux のブートローダモードで Serial デバイスが検知されない
 カーネルがデバイスを適切にサポートしていることを確認してください。デバイスが、Pro Micro (Atmega32u4) のように USB ACM を使う場合、`CONFIG_USB_ACM=y` を含めるようにしてください。他のデバイスは `USB_SERIAL` およびそのサブオプションを必要とするかもしれません。
 
@@ -99,46 +128,6 @@ https://github.com/tmk/tmk_keyboard/issues/150
 - http://www.obdev.at/products/vusb/license.html
 - http://www.mcselec.com/index.php?page=shop.product_details&flypage=shop.flypage&product_id=92&option=com_phpshop&Itemid=1
 
-## AVR のための BOOTLOADER_SIZE
-Teensy2.0++ ブートローダのサイズは 2048 バイトであることに注意してください。一部の Makefile には間違ったコメントがあります。
-
-```
-# Boot Section Size in *bytes*
-#   Teensy halfKay   512
-#   Teensy++ halfKay 2048
-#   Atmel DFU loader 4096       (TMK Alt Controller)
-#   LUFA bootloader  4096
-#   USBaspLoader     2048
-OPT_DEFS += -DBOOTLOADER_SIZE=2048
-```
-
-## MacOS での `avr-gcc: internal compiler error: Abort trap: 6 (program cc1)` 
-
-これは brew での更新に関する問題で、avr-gcc が依存するシンボリックリンクを壊します。
-
-解決法は全ての影響を受けたモジュールを削除し再インストールすることです。
-
-```
-brew rm avr-gcc avr-gcc@8 dfu-programmer dfu-util gcc-arm-none-eabi arm-gcc-bin@8 avrdude qmk
-brew install qmk/qmk/qmk
-brew link --force avr-gcc@8
-brew link --force arm-gcc-bin@8
-```
-
-### `avr-gcc` と LUFA
-
-`avr-gcc` を更新し、LUFA に関連するエラーが表示された場合、例えば:
-
-`lib/lufa/LUFA/Drivers/USB/Class/Device/AudioClassDevice.h:380:5: error: 'const' attribute on function returning 'void'`
-
-今のところ、Homebrew で `avr-gcc` を 8 にロールバックする必要があります。
-
-```
-brew uninstall --force avr-gcc
-brew install avr-gcc@8
-brew link --force avr-gcc@8
-```
-
 ### キーボードに書き込んだが何も起こらない、あるいはキーの押下が登録されない - ARM (rev6 planck、clueboard 60、hs60v2 など) でも同じ (Feb 2019)
 ARM ベースのチップ上での EEPROM の動作によって、保存された設定が無効になる場合があります。これはデフォルトレイヤに影響し、まだ調査中の特定の環境下でキーボードが使えなくなる*しれません*。EEPROM のリセットでこれが修正されます。
 

docs/ja/faq_debug.md

@@ -1,8 +1,8 @@
 # デバッグの FAQ
 
 <!---
-  original document: 0.9.10:docs/faq_debug.md
-  git diff 0.9.10 HEAD -- docs/faq_debug.md | cat
+  original document: 0.10.33:docs/faq_debug.md
+  git diff 0.10.33 HEAD -- docs/faq_debug.md | cat
 -->
 
 このページは、キーボードのトラブルシューティングについての様々な一般的な質問を説明します。
@@ -36,20 +36,6 @@ Linux のような OS でデバイスにアクセスするには、権限が必
 - デバッグ print の代わりに 'print' 関数を使ってみてください。**common/print.h** を見てください。
 - コンソール機能を持つ他のデバイスを切断します。[Issue #97](https://github.com/tmk/tmk_keyboard/issues/97) を見てください。
 
-## Linux あるいは UNIX のようなシステムはスーパーユーザ権限を必要とします
-権限付きで *hid_listen* を実行するために 'sudo' を使ってください。
-```
-$ sudo hid_listen
-```
-
-または rules ディレクトリにファイルを置いて、TMK デバイスのための *udev rule* を追加します。ディレクトリは各システムで異なるかもしれません。
-
-File: /etc/udev/rules.d/52-tmk-keyboard.rules (Ubuntu の場合)
-```
-# tmk keyboard products     https://github.com/tmk/tmk_keyboard
-SUBSYSTEMS=="usb", ATTRS{idVendor}=="feed", MODE:="0666"
-```
-
 ***
 
 # 雑多なこと

docs/ja/feature_auto_shift.md

@@ -1,8 +1,8 @@
 # 自動シフト: なぜシフトキーが必要ですか？
 
 <!---
-  original document: 0.9.0:docs/feature_auto_shift.md
-  git diff 0.9.0 HEAD -- docs/feature_auto_shift.md | cat
+  original document: 0.10.33:docs/feature_auto_shift.md
+  git diff 0.10.33 HEAD -- docs/feature_auto_shift.md | cat
 -->
 
 キーをタップすると、その文字を取得します。キーをタップするが、*わずかに*長く押し続けると、シフト状態になります。ほら！シフトキーは必要ありません！
@@ -109,7 +109,7 @@ AからZを含むアルファベット文字を自動シフトしません。
 5. タイムアウトを増やすことに決めた場合は、`KC_ASUP` にマップしたキーを押し、ステップ1に戻ります。
 6. 結果に満足したら、`KC_ASRP` にマップしたキーを押します。キーボードは `AUTO_SHIFT_TIMEOUT` の値を自動的に入力します。
 7. 報告された値で `config.h` の `AUTO_SHIFT_TIMEOUT` を更新します。
-8. `config.h` から `AUTO_SHIFT_SETUP` を削除します。
+8. `config.h` に `AUTO_SHIFT_NO_SETUP` を追加します。
 9. `KC_ASDN`、`KC_ASUP` および `KC_ASRP` のキーバインディングを削除します。
 10. 新しいファームウェアをコンパイルしてアップロードします。
 

docs/ja/feature_backlight.md

@@ -1,8 +1,8 @@
 # バックライト :id=backlighting
 
 <!---
-  original document: 0.9.44:docs/feature_backlight.md
-  git diff 0.9.44 HEAD -- docs/feature_backlight.md | cat
+  original document: 0.10.33:docs/feature_backlight.md
+  git diff 0.10.33 HEAD -- docs/feature_backlight.md | cat
 -->
 
 多くのキーボードは、キースイッチを貫通して配置されたり、キースイッチの下に配置された個々の LED によって、バックライトキーをサポートします。この機能は通常スイッチごとに単一の色しか使用できないため、[RGB アンダーグロー](ja/feature_rgblight.md)および [RGB マトリックス](ja/feature_rgb_matrix.md)機能のどちらとも異なりますが、キーボードに複数の異なる単一色の LED を取り付けることは当然可能です。
@@ -165,8 +165,6 @@ BACKLIGHT_DRIVER = pwm
 
 現在のところ、ハードウェア PWM のみがサポートされ、タイマー支援はなく、自動設定は提供されません。
 
-?> STM32F072 のバックライトサポートのテストは制限されています。人によって違うかもしれません。不明な場合は、`rules.mk` で `BACKLIGHT_ENABLE = no` を設定します。
-
 ### ソフトウェア PWM ドライバ :id=software-pwm-driver
 
 このモードでは、他のキーボードのタスクを実行中に PWM は「エミュレート」されます。追加のプラットフォーム設定なしで最大のハードウェア互換性を提供します。トレードオフは、キーボードが忙しい時にバックライトが揺れる可能性があることです。有効にするには、`rules.mk` に以下を追加します:

docs/ja/feature_bluetooth.md

@@ -1,18 +1,18 @@
 # Bluetooth
 
 <!---
-  original document: 0.9.0:docs/feature_bluetooth.md
-  git diff 0.9.0 HEAD -- docs/feature_bluetooth.md | cat
+  original document: 0.10.33:docs/feature_bluetooth.md
+  git diff 0.10.33 HEAD -- docs/feature_bluetooth.md | cat
 -->
 
 ## Bluetooth の既知のサポートハードウェア
 
 現在のところ Bluetooth のサポートは AVR ベースのチップに限られます。Bluetooth 2.1 については、QMK は RN-42 モジュールをサポートします。より最近の BLE プロトコルについては、現在のところ Adafruit Bluefruit SPI Friend のみが直接サポートされています。iOS デバイスに接続するには、BLE が必要です。iOS はマウス入力をサポートしないことに注意してください。
 
-| ボード | Bluetooth プロトコル | 接続タイプ | rules.mk | Bluetooth チップ |
-|----------------------------------------------------------------|----------------------------|----------------|---------------------------|--------------|
-| Roving Networks RN-42 (Sparkfun Bluesmirf) | Bluetooth Classic | UART | `BLUETOOTH = RN42` | RN-42 |
-| [Bluefruit LE SPI Friend](https://www.adafruit.com/product/2633) | Bluetooth Low Energy | SPI | `BLUETOOTH = AdafruitBLE` | nRF51822 |
+| ボード                                                           | Bluetooth プロトコル | 接続タイプ | rules.mk                  | Bluetooth チップ |
+| ---------------------------------------------------------------- | -------------------- | ---------- | ------------------------- | ---------------- |
+| Roving Networks RN-42 (Sparkfun Bluesmirf)                       | Bluetooth Classic    | UART       | `BLUETOOTH = RN42`        | RN-42            |
+| [Bluefruit LE SPI Friend](https://www.adafruit.com/product/2633) | Bluetooth Low Energy | SPI        | `BLUETOOTH = AdafruitBLE` | nRF51822         |
 
 まだサポートされていませんが、可能性のあるもの:
 * [Bluefruit LE UART Friend](https://www.adafruit.com/product/2479)。[tmk 実装がおそらく見つかります](https://github.com/tmk/tmk_keyboard/issues/514)
@@ -30,7 +30,10 @@ Bluefruit UART friend は SPI friend に変換することができますが、
 
 <!-- FIXME: Document bluetooth support more completely. -->
 ## Bluetooth の Rules.mk オプション
-これらのうちの1つだけを使ってください
+
+現在サポートされている Bluetooth チップセットは [N-キーロールオーバー (NKRO)](ja/reference_glossary.md#n-key-rollover-nkro) をサポートしていません。そのため、`rules.mk` に `NKRO_ENABLE = no` を含めなければなりません。
+
+Bluetooth を有効にするには、以下のうちの1つだけを使ってください:
 * BLUETOOTH_ENABLE = yes (レガシーオプション)
 * BLUETOOTH = RN42
 * BLUETOOTH = AdafruitBLE
@@ -39,8 +42,8 @@ Bluefruit UART friend は SPI friend に変換することができますが、
 
 これは複数のキーボードの出力が選択できる場合に使われます。現在のところ、これは USB と Bluetooth の両方をサポートするキーボードで、それらの間の切り替えのみが可能です。
 
-| 名前 | 説明 |
-|----------|----------------------------------------------|
+| 名前       | 説明                                  |
+| ---------- | ------------------------------------- |
 | `OUT_AUTO` | USB と Bluetooth を自動的に切り替える |
-| `OUT_USB` | USB のみ |
-| `OUT_BT` | Bluetooth のみ |
+| `OUT_USB`  | USB のみ                              |
+| `OUT_BT`   | Bluetooth のみ                        |

docs/ja/feature_tap_dance.md

@@ -1,9 +1,9 @@
 # タップダンス: 1つのキーが3つ、5つまたは100の異なる動作をします
 
 <!---
-  original document: 0.9.44:docs/feature_tap_dance.md
-  git diff 0.9.44 HEAD -- docs/feature_tap_dance.md | cat
---> 
+  original document: 0.10.33:docs/feature_tap_dance.md
+  git diff 0.10.33 HEAD -- docs/feature_tap_dance.md | cat
+-->
 
 ## イントロダクション :id=introduction
 
@@ -32,7 +32,9 @@
 * `ACTION_TAP_DANCE_LAYER_TOGGLE(kc, layer)`: 1回タップすると `kc` キーコードが送信され、2回タップすると `layer` の状態をトグルします(これは `TG` レイヤーキーコードのように機能します)。
 * `ACTION_TAP_DANCE_FN(fn)`: ユーザーキーマップに定義した指定の関数が呼び出されます。タップダンス実行の回数分タップすると、最後の時点で呼び出されます。
 * `ACTION_TAP_DANCE_FN_ADVANCED(on_each_tap_fn, on_dance_finished_fn, on_dance_reset_fn)`: タップする度にユーザーキーマップに定義した最初の関数が呼び出されます。タップダンスの実行が終わった時点で2番目の関数が呼び出され、タップダンスの実行をリセットするときに最後の関数が呼び出されます。
-* `ACTION_TAP_DANCE_FN_ADVANCED_TIME(on_each_tap_fn, on_dance_finished_fn, on_dance_reset_fn, tap_specific_tapping_term)`: これは `ACTION_TAP_DANCE_FN_ADVANCED` と同じように機能します。しかし、`TAPPING_TERM` で事前に定義した時間に代えて、カスタマイズしたタップ時間を使えます。
+* ~~`ACTION_TAP_DANCE_FN_ADVANCED_TIME(on_each_tap_fn, on_dance_finished_fn, on_dance_reset_fn, tap_specific_tapping_term)`~~: これは `ACTION_TAP_DANCE_FN_ADVANCED` 関数と同じように機能します。しかし、`TAPPING_TERM` で事前に定義した時間の代わりに、カスタマイズしたタップ時間を使います。
+    * [ここ](ja/custom_quantum_functions.md#Custom_Tapping_Term)で概説するように、これはキーごとのタッピング時間機能を優先して非推奨になりました。この特定のタップダンス機能を使う代わりに、使いたい特定の `TD()` マクロ(`TD(TD_ESC_CAPS)` のような)を確認する必要があります。
+
 
 最初のオプションで、1つのキーに2つの役割を持たせる大抵のケースには十分です。例えば、`ACTION_TAP_DANCE_DOUBLE(KC_SPC, KC_ENT)` は、1回タップすると `Space` を送信し、2回タップすると `Enter` を送信します。
 
@@ -55,7 +57,7 @@
 異なる場合、まず、古いタップダンスを処理し、続いて新しいタップダンスを登録します。
 同じ場合、カウンタの値を増やし、タイマーをリセットします。
 
-このことは、あなたは再びキーをタップするまでの時間として `TAPPING_TERM` の時間を持っていることを意味します。そのため、あなたは1つの `TAPPING_TERM` の時間内に全てのタップを行う必要はありません。これにより、キーの反応への影響を最小限に抑えながら、より長いタップ回数を可能にします。 
+このことは、あなたは再びキーをタップするまでの時間として `TAPPING_TERM` の時間を持っていることを意味します。そのため、あなたは1つの `TAPPING_TERM` の時間内に全てのタップを行う必要はありません。これにより、キーの反応への影響を最小限に抑えながら、より長いタップ回数を可能にします。
 
 次は `matrix_scan_tap_dance()` です。この関数はタップダンスキーのタイムアウトを制御します。
 

docs/ja/flashing.md

@@ -1,8 +1,8 @@
 # 書き込みの手順とブートローダ情報
 
 <!---
-  original document: 0.9.10:docs/flashing.md
-  git diff 0.9.10 HEAD -- docs/flashing.md | cat
+  original document: 0.10.33:docs/flashing.md
+  git diff 0.10.33 HEAD -- docs/flashing.md | cat
 -->
 
 キーボードが使用するブートローダにはかなり多くの種類があり、ほぼ全てが異なる書き込みの方法を使います。幸いなことに、[QMK Toolbox](https://github.com/qmk/qmk_toolbox/releases) のようなプロジェクトは、あまり深く考える必要無しに様々なタイプと互換性を持つことを目指していますが、この文章では様々なタイプのブートローダとそれらを書き込むために利用可能な方法について説明します。
@@ -244,3 +244,4 @@ BOOTLOADER = bootloadHID
 * `:dfu-util-split-left` - デフォルトのオプション (`:dfu-util`) と同様に、通常のファームウェアが書き込まれます。ただし、分割キーボードの「左側の」 EEPROM の設定も行われます。
 * `:dfu-util-split-right` - デフォルトのオプション (`:dfu-util`) と同様に、通常のファームウェアが書き込まれます。ただし、分割キーボードの「右側の」 EEPROM の設定も行われます。
 * `:st-link-cli` - dfu-util ではなく、ST-LINK の CLI ユーティリティを介してファームウェアを書き込めます。
+* `:st-flash` - dfu-util ではなく、[STLink Tools](https://github.com/stlink-org/stlink) の `st-flash` ユーティリティを介してファームウェアを書き込めます。

docs/ja/i2c_driver.md

@@ -2,8 +2,8 @@
 
 <!---
   grep --no-filename "^[ ]*git diff" docs/ja/*.md | sh
-  original document: 0.8.62:docs/i2c_driver.md
-  git diff 0.8.62 HEAD -- docs/i2c_driver.md | cat
+  original document: 0.10.33:docs/i2c_driver.md
+  git diff 0.10.33 HEAD -- docs/i2c_driver.md | cat
 -->
 
 QMK で使われる I2C マスタドライバには、MCU 間のポータビリティを提供するための一連の関数が用意されています。
@@ -83,8 +83,8 @@ STM32 MCU では、使用するハードウェアドライバにより、さま
 |-----------------------|--------------------------------------------------------------------------------------------------|---------|
 | `I2C1_SCL_BANK`       | SCL に使うピンのバンク (`GPIOA`, `GPIOB`, `GPIOC`)                                               | `GPIOB` |
 | `I2C1_SDA_BANK`       | SDA に使うピンのバンク (`GPIOA`, `GPIOB`, `GPIOC`)                                               | `GPIOB` |
-| `I2C1_SCL`            | SCL のピン番号 (0-9)                                                                             | `6`     |
-| `I2C1_SDA`            | SDA のピン番号 (0-9)                                                                             | `7`     |
+| `I2C1_SCL`            | SCL のピン番号 (0-15)                                                                            | `6`     |
+| `I2C1_SDA`            | SDA のピン番号 (0-15)                                                                            | `7`     |
 | `I2C1_BANK`（非推奨） | 使用するピンのバンク (`GPIOA`, `GPIOB`, `GPIOC`)。後継は `I2C1_SCL_BANK`, `I2C1_SDA_BANK` です。 | `GPIOB` |
 
 ChibiOS I2C ドライバの設定項目は STM32 MCU の種類に依存します。

docs/ja/isp_flashing_guide.md

@@ -0,0 +1,284 @@
+# ISP 書き込みガイド
+
+<!---
+  grep --no-filename "^[ ]*git diff" docs/ja/*.md | sh
+  original document: 0.9.46:docs/isp_flashing_guide.md
+  git diff 0.9.46 HEAD -- docs/isp_flashing_guide.md | cat
+-->
+
+ISP 書き込み(ICSP 書き込みと呼ぶ場合もあります)とは、マイクロコントローラーを直接プログラミングするプロセスです。
+これにより、ブートローダを交換したり、コントローラの「ヒューズ」を変更することができ、コントローラの速度や起動方法、その他のオプションなど、多くのハードウェアおよびソフトウェア関連の機能を制御します。
+
+QMK の ISP 書き込みの主な用途は、AVRベースのコントローラ（Pro Micro、または V-USB チップ）のブートローダの書き込みまたは交換です。
+
+?> これは Pro Micro や他の ATmega コントローラなどの AVR ベースのボードをプログラミングするためだけのものです。 Proton C などの Arm コントローラには使用できません。
+
+## 破損したブートローダーの取り扱い
+
+ボードの書き込み/消去で問題が発生し、DFU ベースのコントローラで次のような不可解なエラーメッセージが表示される場合：
+
+    libusb: warning [darwin_transfer_status] transfer error: timed out
+    dfu.c:844: -ETIMEDOUT: Transfer timed out, NAK 0xffffffc4 (-60)
+    atmel.c:1627: atmel_flash: flash data dfu_download failed.
+    atmel.c:1629: Expected message length of 1072, got -60.
+    atmel.c:1434: Error flashing the block: err -2.
+    ERROR
+    Memory write error, use debug for more info.
+    commands.c:360: Error writing memory data. (err -4)
+
+    dfu.c:844: -EPIPE: a) Babble detect or b) Endpoint stalled 0xffffffe0 (-32)
+    Device is write protected.
+    dfu.c:252: dfu_clear_status( 0x7fff4fc2ea80 )
+    atmel.c:1434: Error flashing the block: err -2.
+    ERROR
+    Memory write error, use debug for more info.
+    commands.c:360: Error writing memory data. (err -4)
+
+または、Pro Micro ベースのコントローラに対して次のようなメッセージが表示された場合:
+
+    avrdude: butterfly_recv(): programmer is not responding
+    avrdude: butterfly_recv(): programmer is not responding
+    avrdude: verification error, first mismatch at byte 0x002a
+            0x2b != 0x75
+    avrdude: verification error; content mismatch
+    avrdude: verification error; content mismatch
+
+
+あなたのボード/デバイスを再び動作させるには、ISP 書き込みが必要になるかもしれません。
+
+## 必要なハードウェア
+
+実際に ISP の書き込みを行うには、以下のいずれか（その後に使用するプロトコルが続きます）が必要になります。
+
+* [SparkFun PocketAVR](https://www.sparkfun.com/products/9825) - (USB Tiny)
+* [USBtinyISP AVR Programmer Kit](https://www.adafruit.com/product/46) - (USB Tiny)
+* [Teensy 2.0](https://www.pjrc.com/store/teensy.html) - (avrisp)
+* [Pro Micro](https://www.sparkfun.com/products/12640)  - (avrisp)
+* [Bus Pirate](https://www.adafruit.com/product/237) - (buspirate)
+
+ISP 書き込みに使用できるデバイスは他にもありますが、これらが主なものです。
+また、すべての製品リンクは公式バージョンへのものです。他の場所で入手することもできます。
+
+また、「ISP プログラマ」をプログラミングするデバイスに配線するためのものも必要になります。
+PCB の中には直接使用できる ISP ヘッダがあるものもありますが、そうではない場合が多いので、コントローラ自体にハンダ付けするか、別のスイッチや他のコンポーネントにハンダ付けする必要があるでしょう。
+
+### ISP ファームウェア
+
+Teensy と Pro Micro のコントローラを ISP プログラマとして使用するには、コントローラに ISP ファームウェアを書き込む必要があります。
+それ以外のハードウェアは、あらかじめプログラムされているはずです。
+そのため、これらのコントローラの場合は、正しい hex ファイルをダウンロードしてから書き込んでください。
+
+* Teensy 2.0: [`util/teensy_2.0_ISP_B0.hex`](https://github.com/qmk/qmk_firmware/blob/master/util/teensy_2.0_ISP_B0.hex) (`B0`)
+* Pro Micro: [`util/pro_micro_ISP_B6_10.hex`](https://github.com/qmk/qmk_firmware/blob/master/util/pro_micro_ISP_B6_10.hex) (`10/B6`)
+
+コントローラに書き込んだら、この hex ファイルはもう必要ありません。
+
+## 必要なソフトウェア
+
+QMK ツールボックスは、このほとんど（すべて）に使用することができます。
+
+ただし、Teensy 2.0 ボードを使っている場合は、[Teensy Loader](https:/www.pjrc.comteensyloader.html) を使えば、Teensy 2.0 ボードに書き込むことができます。
+あるいは、`avrdude` (`qmk_install.sh` の一部としてインストールされています) や、[AVRDUDESS](https:/blog.zakkemble.netavrdudess-a-gui-for-avrdude)(Windows 用) を使って、Pro Micro に書き込んだり、ISP を書き込んだりすることができます。
+
+## 配線
+
+これは非常に簡単です。次のようにして、相互に対応するものを接続します。
+
+### SparkFun Pocket AVR
+
+    PocketAVR RST  <-> Keyboard RESET
+    PocketAVR SCLK <-> Keyboard B1 (SCLK)
+    PocketAVR MOSI <-> Keyboard B2 (MOSI)
+    PocketAVR MISO <-> Keyboard B3 (MISO)
+    PocketAVR VCC  <-> Keyboard VCC
+    PocketAVR GND  <-> Keyboard GND
+
+### Teensy 2.0
+
+    Teensy B0  <-> Keyboard RESET
+    Teensy B1  <-> Keyboard B1 (SCLK)
+    Teensy B2  <-> Keyboard B2 (MOSI)
+    Teensy B3  <-> Keyboard B3 (MISO)
+    Teensy VCC <-> Keyboard VCC
+    Teensy GND <-> Keyboard GND
+    
+!> Teensy の B0 ピンはキーボードのコントローラの RESET/RST ピンと配線されています。 Teensy の RESET ピンをキーボードの RESET に配線しないでください。
+
+### Pro Micro
+
+    Pro Micro 10 (B6)  <-> Keyboard RESET
+    Pro Micro 15 (B1)  <-> Keyboard B1 (SCLK)
+    Pro Micro 16 (B2)  <-> Keyboard B2 (MOSI)
+    Pro Micro 14 (B3)  <-> Keyboard B3 (MISO)
+    Pro Micro VCC      <-> Keyboard VCC
+    Pro Micro GND      <-> Keyboard GND
+
+!> Pro Micro の 10/B6 ピンはキーボードのコントローラの RESET/RST ピンに配線されています。 Pro Micro の RESET ピンをキーボードの RESET に配線 ***しないでください***。
+
+## キーボードへの書き込み
+
+ISP プログラマをセットアップして、キーボードに接続したら、キーボードに書き込みをします。
+
+### ブートローダファイル
+
+普通の状態に戻す一番簡単で手っ取り早い方法は、キーボードにブートローダだけ書き込むことです。
+これが終れば、普通にキーボードを接続して、普通にキーボードに書き込みできるようになります。
+
+標準のブートローダは[`util/` フォルダー](https://github.com/qmk/qmk_firmware/tree/master/util) にあります。
+チップの正しいブートローダを書き込んでください:
+
+* **Atmel DFU**
+  * [ATmega16U4](https://github.com/qmk/qmk_firmware/blob/master/util/bootloader_atmega16u4_1.0.1.hex)
+  * [ATmega32U4](https://github.com/qmk/qmk_firmware/blob/master/util/bootloader_atmega32u4_1.0.0.hex)
+  * [AT90USB64](https://github.com/qmk/qmk_firmware/blob/master/util/bootloader_at90usb64_1.0.0.hex)
+  * [AT90USB128](https://github.com/qmk/qmk_firmware/blob/master/util/bootloader_at90usb128_1.0.1.hex)
+* **Caterina**
+  * [Pro Micro (5V/16MHz)](https://github.com/sparkfun/Arduino_Boards/blob/master/sparkfun/avr/bootloaders/caterina/Caterina-promicro16.hex)
+  * [Pro Micro (3.3V/8MHz)](https://github.com/sparkfun/Arduino_Boards/blob/master/sparkfun/avr/bootloaders/caterina/Caterina-promicro8.hex)
+* **BootloadHID (PS2AVRGB)**
+  * [ATmega32A](https://github.com/qmk/qmk_firmware/blob/master/util/bootloader_ps2avrgb_bootloadhid_1.0.1.hex)
+
+お使いのボードが何を使っているかわからない場合は、QMK のキーボード用の `rules.mk` ファイルを見てください。
+`MCU` と `BOOTLOADER` の行には必要な値が書かれています。これはボードのバージョンによって異なるかもしれません。
+
+### 製造手法
+
+ブートローダと通常のファームウェアを同時に書き込みたい場合、2つの方法があります。
+手動で行うか、コンパイル時に `:production` ターゲットを使って行うかです。
+
+手動で行うには:
+
+1. オリジナルのファームウェアの .hex ファイルをテキストエディタで開きます
+2. 最後の行を削除してください。(`:00000001FF`になっているはずです - これは EOF メッセージです)
+3. ブートローダの内容全体を新しい行にコピーして(行間に空行を入れないように)、元のファイルの最後に貼り付けてください。
+4. これを新しいファイルとして `<keyboard>_<keymap>_production.hex` という名前で保存します。
+
+?> ここでは他のブートローダも同じように使うことができますが、__ブートローダが必要で__、そうしないとまた ISP を使ってキーボードに新しいファームウェアを書き込まなければならなくなります。
+
+#### QMK DFU ブートローダとプロダクションイメージの作成
+
+コンパイル時に `:production` ターゲットを使用して、ボード用のファームウェア、QMK DFU ブートローダ、プロダクションファームウェアイメージを作成することができます。
+これが完了すると、3つのファイルが表示されます:
+
+* `<keyboard>_<keymap>.hex`
+* `<keyboard>_<keymap>_bootloader.hex`
+* `<keyboard>_<keymap>_production.hex`
+
+QMK DFU ブートローダは `atmega32u4` コントローラ (AVR ベースの Planck ボードや Pro Micro など) でしかテストされておらず、他のコントローラではテストされていません。
+しかし、`atmega32a` や `atmega328p` のような V-USB コントローラでは間違いなく動作しません。
+
+ブートローダかプロダクションファームウェアファイルのどちらかを書き込むことができます。
+プロダクションファームウェアファイルの方が、より多くのデータを書き込むので、書き込みに時間がかかります。
+
+?> 注意：同じブートローダを使用しつづけるべきです。すでに DFU を使用している場合は、QMK DFU に切り替えても問題ありません。しかし、例えば Pro Micro に QMK DFU を書き込むには、追加の手順が必要になります。
+
+## ブートローダ/プロダクションファイルの書き込み
+
+キーボードがどのデバイスにも接続されていないことを確認し、ISP プログラマを接続してください。
+
+ブートローダの種類を変更したい場合は、コマンドラインを使用する必要があります。
+
+### QMK Toolbox
+
+1. 'AVRISP device connected' または `USB Tiny device connected` が黄色で表示されます。
+2. `Open` ダイアログで正しいブートローダー/プロダクションの .hex ファイルを選択します（パスにスペースを含めることはできません）
+3. 書きこもうとしているキーボード（ISP プログラマではなく）のための正しい `Microcontroller` オプションが選択されていることを確認してください。
+4. `Flash` を押します
+5. 特にプロダクションファイルの場合、しばらくは何も出力されませんが、待ちましょう。
+
+検証とヒューズのチェックに問題がなければ、完了です。
+ボードが自動的に再起動する場合があります。
+それ以外の場合は、Teensy のプラグを抜いて、キーボードを接続します。
+テスト中は、Teensy をキーボードに接続したままにすることができますが、すべてが正常に機能することを確認したら、はんだを外すか、配線を外すことをお勧めします。
+
+### コマンドライン
+
+ターミナル（Windows の場合は `cmd`）を開いて、修正した .hex ファイルがある場所に移動します。
+ここでは、このファイルを `main.hex` と呼び、Teensy 2.0 が `COM3` ポートに接続されていると仮定します。
+よくわからない場合は、デバイスマネージャを開いて、`Ports > USB Serial Device` を探してください。ここにある COM ポートを使ってください。
+あなたはそれが正しいポートであることを確認することができます：
+
+    avrdude -c avrisp -P COM3 -p atmega32u4
+
+次のような出力が得られるはずです:
+
+    avrdude: AVR device initialized and ready to accept instructions
+
+    Reading | ################################################## | 100% 0.02s
+
+    avrdude: Device signature = 0x1e9587
+
+    avrdude: safemode: Fuses OK
+
+    avrdude done.  Thank you.
+
+私たちのキーボードは `atmega32u4`（共通）を使用しているので、これが指定するチップです。
+以下が完全なコマンドです：
+
+    avrdude -c avrisp -P COM3 -p atmega32u4 -U flash:w:main.hex:i
+
+ボードが `atmega32a`（jj40 など）を使用している場合、コマンドは次のとおりです（最後の追加コードによりヒューズが正しく設定されます）。
+
+	avrdude -c avrisp -P COM3 -p atmega32 -U flash:w:main.hex:i -U hfuse:w:0xD0:m -U lfuse:w:0x0F:m
+
+プログレスバーが表示されてから、以下が表示されるはずです。
+
+    avrdude: verifying ...
+    avrdude: 32768 bytes of flash verified
+
+    avrdude: safemode: Fuses OK
+
+    avrdude done.  Thank you.
+
+これは全てうまく動作したことを示しています。
+ボードが自動的に再起動する場合もありますが、そうでない場合は、Teensy のプラグを抜いてキーボードを接続してください。
+テスト中は、Teensy をキーボードに接続したままにすることができますが、すべてが正常に機能することを確認したら、はんだを外すか、配線を外すことをお勧めします。
+
+SparkFun PocketAVR Programmer や、他の USB Tiny ベースの ISP プログラマを使用している場合は、次のようなものを使用すると良いでしょう。
+
+    avrdude -c usbtiny -P usb -p atmega32u4
+
+#### 上級者向け: ヒューズの変更
+
+Pro Micro に QMK DFU を書き込むなど、ブートローダを切り替える場合は、ブートローダの hex ファイルの書き込みに加えて、ヒューズを変更する必要があります。
+これは、`caterina` (Pro Micro ブートローダ) と `dfu` では起動ルーチンの扱いが異なり、その動作はヒューズによって制御されるからです。
+
+!> これは、ヒューズを変更することは、永久にあなたのコントローラをレンガ化(訳注:日本では文鎮化と呼ぶことが多い、コントローラがまったく無反応になる状態)することができる方法の1つであるため、それは非常に注意が必要な1つの領域です。 
+
+以下は、`atmega32u4`の 5V 16MHz 版（5V Pro Micro など）を想定しています。
+
+`atmega32u4`の DFU の場合、必要なヒューズ設定は次のとおりです:
+
+| ヒューズ | 設定             |
+|----------|------------------|
+| Low      | `0x5E`           |
+| High     | `0xD9` or `0x99` |
+| Extended | `0xC3`           |
+
+High ヒューズは 0xD9 か 0x99 のどちらかになります。
+違いは、0xD9 は QMK Firmware がソフトウェアでも無効化している JTAG を無効化しているのに対し、0x99 は JTAG を無効化していないことです。
+
+これを設定するには、`-U lfuse:w:0x5E:m -U hfuse:w:0xD9:m -U efuse:w:0xC3:m` をコマンドに追加します。
+そうすると、最終的なコマンドは次のようになります。
+
+    avrdude -c avrisp -P COM3 -p atmega32u4 -U flash:w:main.hex:i -U lfuse:w:0x5E:m -U hfuse:w:0xD9:m -U efuse:w:0xC3:m
+
+`atmega32u4`の Caterina では、以下があなたに必要なヒューズの設定です。
+
+| ヒューズ | 設定   |
+|----------|--------|
+| Low      | `0xFF` |
+| High     | `0xD8` |
+| Extended | `0xCB` |
+
+これを設定するには、コマンドに `-U lfuse:w:0xFF:m -U hfuse:w:0xD8:m -U efuse:w:0xCB:m` を追加します。
+これで、最終的なコマンドは次のようになるはずです。
+
+    avrdude -c avrisp -P COM3 -p atmega32u4 -U flash:w:main.hex:i -U lfuse:w:0xFF:m -U hfuse:w:0xD8:m -U efuse:w:0xCB:m
+
+
+別のコントローラーを使用している場合や、別の設定を希望する場合は、この[AVR ヒューズ計算機](http:/www.engbedded.comfusecalc)を使用して、より適切な値を見つけることができます。
+
+## ヘルプ
+
+ご質問・ご不明な点がありましたら、お気軽に[issue を開いてください](https://github.com/qmk/qmk_firmware/issues/new)！

docs/ja/ref_functions.md

@@ -1,8 +1,8 @@
 # キーボードをより良くするための便利なコア関数のリスト
 
 <!---
-  original document: 0.9.47:docs/ref_functions.md
-  git diff 0.9.47 HEAD -- docs/ref_functions.md | cat
+  original document: 0.10.33:docs/ref_functions.md
+  git diff 0.10.33 HEAD -- docs/ref_functions.md | cat
 -->
 
 QMK には、信じられないほど便利な、またはあなたが望んでいた機能を少し追加する、隠された関数がたくさんあります。特定の機能に固有の関数はそれぞれの機能のページにあるため、ここには含まれていません。
@@ -48,7 +48,9 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) {
 ### `update_tri_layer_state(state, x, y, z)`
 もう1つの関数は `update_tri_layer_state(state, x, y, z)` です。この関数は [`layer_state_set_*` 関数](ja/custom_quantum_functions.md#layer-change-code)から呼び出されることを意図しています。これは、キーコードを使ってレイヤーを変更するたびに、これがチェックされることを意味します。したがって、`LT(layer, kc)` を使ってレイヤーを変更すると、同じレイヤーチェックが引き起こされます。
 
-このメソッドの注意点は、`x` および `y` レイヤーをオンにしないと、`z` レイヤーにアクセスできないことです。レイヤー `z` のみをアクティブにしようとすると、このコードが実行され、使用前にレイヤー `z` がオフになるからです。
+このメソッドの注意点は2つあります:
+1. `x` および `y` レイヤーをオンにしないと、`z` レイヤーにアクセスできません。これは、レイヤー `z` のみをアクティブにしようとすると、このコードが実行され、使用前にレイヤー `z` がオフになるからです。
+2. レイヤーは最上位の番号から処理されるので、`z` は `x` や `y` よりも上位のレイヤーでなければなりません。そうでなければアクセスできない場合があります。
 
 #### 例
 

keyboards/aeboards/ext65/rev2/bootloader_defs.h

@@ -1,7 +0,0 @@
-/* Address for jumping to bootloader on STM32 chips. */
-/* It is chip dependent, the correct number can be looked up here (page 175):
- * http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf
- * This also requires a patch to chibios:
- *  <tmk_dir>/tmk_core/tool/chibios/ch-bootloader-jump.patch
- */
-#define STM32_BOOTLOADER_ADDRESS 0x1FFFC800

keyboards/ai03/vega/bootloader_defs.h

@@ -1,7 +0,0 @@
-/* Address for jumping to bootloader on STM32 chips. */
-/* It is chip dependent, the correct number can be looked up here (page 175):
- * http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf
- * This also requires a patch to chibios:
- *  <tmk_dir>/tmk_core/tool/chibios/ch-bootloader-jump.patch
- */
-#define STM32_BOOTLOADER_ADDRESS 0x1FFFC800

keyboards/cannonkeys/an_c/bootloader_defs.h

@@ -1,7 +0,0 @@
-/* Address for jumping to bootloader on STM32 chips. */
-/* It is chip dependent, the correct number can be looked up here (page 175):
- * http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf
- * This also requires a patch to chibios:
- *  <tmk_dir>/tmk_core/tool/chibios/ch-bootloader-jump.patch
- */
-#define STM32_BOOTLOADER_ADDRESS 0x1FFFC800

keyboards/cannonkeys/chimera65/bootloader_defs.h

@@ -1,7 +0,0 @@
-/* Address for jumping to bootloader on STM32 chips. */
-/* It is chip dependent, the correct number can be looked up here (page 175):
- * http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf
- * This also requires a patch to chibios:
- *  <tmk_dir>/tmk_core/tool/chibios/ch-bootloader-jump.patch
- */
-#define STM32_BOOTLOADER_ADDRESS 0x1FFFC800

keyboards/cannonkeys/instant60/bootloader_defs.h

@@ -1,7 +0,0 @@
-/* Address for jumping to bootloader on STM32 chips. */
-/* It is chip dependent, the correct number can be looked up here (page 175):
- * http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf
- * This also requires a patch to chibios:
- *  <tmk_dir>/tmk_core/tool/chibios/ch-bootloader-jump.patch
- */
-#define STM32_BOOTLOADER_ADDRESS 0x1FFFC800

keyboards/cannonkeys/iron165/bootloader_defs.h

@@ -1,7 +0,0 @@
-/* Address for jumping to bootloader on STM32 chips. */
-/* It is chip dependent, the correct number can be looked up here (page 175):
- * http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf
- * This also requires a patch to chibios:
- *  <tmk_dir>/tmk_core/tool/chibios/ch-bootloader-jump.patch
- */
-#define STM32_BOOTLOADER_ADDRESS 0x1FFFC800

keyboards/cannonkeys/ortho48/bootloader_defs.h

@@ -1,10 +0,0 @@
-/* Address for jumping to bootloader on STM32 chips. */
-/* It is chip dependent, the correct number can be looked up here (page 175):
- * http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf
- * This also requires a patch to chibios:
- *  <tmk_dir>/tmk_core/tool/chibios/ch-bootloader-jump.patch
- */
-
-// STM32F103* does NOT have an USB bootloader in ROM (only serial),
-//  so setting anything here does not make much sense
-#define STM32_BOOTLOADER_ADDRESS 0x80000000

keyboards/cannonkeys/ortho48/rules.mk

@@ -1,12 +1,8 @@
 # MCU name
 MCU = STM32F103
 
-# GENERIC STM32F103C8T6 board - stm32duino bootloader
-MCU_LDSCRIPT = STM32F103x8_stm32duino_bootloader
-BOARD = STM32_F103_STM32DUINO
-
-DFU_ARGS = -d 1eaf:0003 -a2 -R
-DFU_SUFFIX_ARGS = -v 1eaf -p 0003
+# Bootloader selection
+BOOTLOADER = stm32duino
 
 # project specific files
 VPATH += keyboards/cannonkeys/bluepill

keyboards/cannonkeys/ortho60/bootloader_defs.h

@@ -1,10 +0,0 @@
-/* Address for jumping to bootloader on STM32 chips. */
-/* It is chip dependent, the correct number can be looked up here (page 175):
- * http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf
- * This also requires a patch to chibios:
- *  <tmk_dir>/tmk_core/tool/chibios/ch-bootloader-jump.patch
- */
-
-// STM32F103* does NOT have an USB bootloader in ROM (only serial),
-//  so setting anything here does not make much sense
-#define STM32_BOOTLOADER_ADDRESS 0x80000000

keyboards/cannonkeys/ortho60/rules.mk

@@ -1,12 +1,8 @@
 # MCU name
 MCU = STM32F103
 
-# GENERIC STM32F103C8T6 board - stm32duino bootloader
-MCU_LDSCRIPT = STM32F103x8_stm32duino_bootloader
-BOARD = STM32_F103_STM32DUINO
-
-DFU_ARGS = -d 1eaf:0003 -a2 -R
-DFU_SUFFIX_ARGS = -v 1eaf -p 0003
+# Bootloader selection
+BOOTLOADER = stm32duino
 
 # project specific files
 VPATH += keyboards/cannonkeys/bluepill

keyboards/cannonkeys/ortho75/bootloader_defs.h

@@ -1,10 +0,0 @@
-/* Address for jumping to bootloader on STM32 chips. */
-/* It is chip dependent, the correct number can be looked up here (page 175):
- * http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf
- * This also requires a patch to chibios:
- *  <tmk_dir>/tmk_core/tool/chibios/ch-bootloader-jump.patch
- */
-
-// STM32F103* does NOT have an USB bootloader in ROM (only serial),
-//  so setting anything here does not make much sense
-#define STM32_BOOTLOADER_ADDRESS 0x80000000

keyboards/cannonkeys/ortho75/rules.mk

@@ -1,12 +1,8 @@
 # MCU name
 MCU = STM32F103
 
-# GENERIC STM32F103C8T6 board - stm32duino bootloader
-MCU_LDSCRIPT = STM32F103x8_stm32duino_bootloader
-BOARD = STM32_F103_STM32DUINO
-
-DFU_ARGS = -d 1eaf:0003 -a2 -R
-DFU_SUFFIX_ARGS = -v 1eaf -p 0003
+# Bootloader selection
+BOOTLOADER = stm32duino
 
 # project specific files
 VPATH += keyboards/cannonkeys/bluepill

keyboards/cannonkeys/practice60/bootloader_defs.h

@@ -1,10 +0,0 @@
-/* Address for jumping to bootloader on STM32 chips. */
-/* It is chip dependent, the correct number can be looked up here (page 175):
- * http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf
- * This also requires a patch to chibios:
- *  <tmk_dir>/tmk_core/tool/chibios/ch-bootloader-jump.patch
- */
-
-// STM32F103* does NOT have an USB bootloader in ROM (only serial),
-//  so setting anything here does not make much sense
-#define STM32_BOOTLOADER_ADDRESS 0x80000000

keyboards/cannonkeys/practice60/rules.mk

@@ -1,12 +1,8 @@
 # MCU name
 MCU = STM32F103
 
-# GENERIC STM32F103C8T6 board - stm32duino bootloader
-MCU_LDSCRIPT = STM32F103x8_stm32duino_bootloader
-BOARD = STM32_F103_STM32DUINO
-
-DFU_ARGS = -d 1eaf:0003 -a2 -R
-DFU_SUFFIX_ARGS = -v 1eaf -p 0003
+# Bootloader selection
+BOOTLOADER = stm32duino
 
 # project specific files
 VPATH += keyboards/cannonkeys/bluepill

keyboards/cannonkeys/practice65/bootloader_defs.h

@@ -1,10 +0,0 @@
-/* Address for jumping to bootloader on STM32 chips. */
-/* It is chip dependent, the correct number can be looked up here (page 175):
- * http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf
- * This also requires a patch to chibios:
- *  <tmk_dir>/tmk_core/tool/chibios/ch-bootloader-jump.patch
- */
-
-// STM32F103* does NOT have an USB bootloader in ROM (only serial),
-//  so setting anything here does not make much sense
-#define STM32_BOOTLOADER_ADDRESS 0x80000000

keyboards/cannonkeys/practice65/rules.mk

@@ -1,12 +1,8 @@
 # MCU name
 MCU = STM32F103
 
-# GENERIC STM32F103C8T6 board - stm32duino bootloader
-MCU_LDSCRIPT = STM32F103x8_stm32duino_bootloader
-BOARD = STM32_F103_STM32DUINO
-
-DFU_ARGS = -d 1eaf:0003 -a2 -R
-DFU_SUFFIX_ARGS = -v 1eaf -p 0003
+# Bootloader selection
+BOOTLOADER = stm32duino
 
 # project specific files
 VPATH += keyboards/cannonkeys/bluepill

keyboards/cannonkeys/savage65/bootloader_defs.h

@@ -1,7 +0,0 @@
-/* Address for jumping to bootloader on STM32 chips. */
-/* It is chip dependent, the correct number can be looked up here (page 175):
- * http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf
- * This also requires a patch to chibios:
- *  <tmk_dir>/tmk_core/tool/chibios/ch-bootloader-jump.patch
- */
-#define STM32_BOOTLOADER_ADDRESS 0x1FFFC800

keyboards/cannonkeys/tmov2/bootloader_defs.h

@@ -1,7 +0,0 @@
-/* Address for jumping to bootloader on STM32 chips. */
-/* It is chip dependent, the correct number can be looked up here (page 175):
- * http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf
- * This also requires a patch to chibios:
- *  <tmk_dir>/tmk_core/tool/chibios/ch-bootloader-jump.patch
- */
-#define STM32_BOOTLOADER_ADDRESS 0x1FFFC800

keyboards/converter/siemens_tastatur/bootloader_defs.h

@@ -1,10 +0,0 @@
-/* Address for jumping to bootloader on STM32 chips. */
-/* It is chip dependent, the correct number can be looked up here (page 175):
- * http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf
- * This also requires a patch to chibios:
- *  <tmk_dir>/tmk_core/tool/chibios/ch-bootloader-jump.patch
- */
-
-// STM32F103* does NOT have an USB bootloader in ROM (only serial),
-//  so setting anything here does not make much sense
-#define STM32_BOOTLOADER_ADDRESS 0x80000000

keyboards/converter/siemens_tastatur/rules.mk

@@ -1,12 +1,8 @@
 # MCU name
 MCU = STM32F103
 
-# GENERIC STM32F103C8T6 board - stm32duino bootloader
-MCU_LDSCRIPT = STM32F103x8_stm32duino_bootloader
-BOARD = STM32_F103_STM32DUINO
-
-DFU_ARGS = -d 1eaf:0003 -a2 -R
-DFU_SUFFIX_ARGS = -v 1eaf -p 0003
+# Bootloader selection
+BOOTLOADER = stm32duino
 
 SRC = matrix.c
 

keyboards/emajesty/eiri/config.h

@@ -0,0 +1,96 @@
+/*
+Copyright 2020 EMajesty
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID    0xFEED
+#define PRODUCT_ID   0x9372
+#define DEVICE_VER   0x0001
+#define MANUFACTURER EMajesty
+#define PRODUCT      eiri
+
+/* key matrix size */
+#define MATRIX_ROWS 4
+#define MATRIX_COLS 12
+
+/*
+ * Keyboard Matrix Assignments
+ *
+ * Change this to how you wired your keyboard
+ * COLS: AVR pins used for columns, left to right
+ * ROWS: AVR pins used for rows, top to bottom
+ * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
+ *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
+ *
+ */
+#define MATRIX_ROW_PINS { B4, B5, B2, B6 }
+#define MATRIX_COL_PINS { D1, D0, D4, C6, D7, E6, B3, B1, F7, F6, F5, F4 }
+#define UNUSED_PINS
+
+/* COL2ROW, ROW2COL */
+#define DIODE_DIRECTION COL2ROW
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCE 5
+
+/*
+ * Force NKRO
+ *
+ * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
+ * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
+ * makefile for this to work.)
+ *
+ * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
+ * until the next keyboard reset.
+ *
+ * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
+ * fully operational during normal computer usage.
+ *
+ * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
+ * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
+ * bootmagic, NKRO mode will always be enabled until it is toggled again during a
+ * power-up.
+ *
+ */
+//#define FORCE_NKRO
+
+/*
+ * Feature disable options
+ *  These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+//#define NO_DEBUG
+
+/* disable print */
+//#define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+
+/* disable these deprecated features by default */
+#define NO_ACTION_MACRO
+#define NO_ACTION_FUNCTION
+
+/* Bootmagic Lite key configuration */
+//#define BOOTMAGIC_LITE_ROW 0
+//#define BOOTMAGIC_LITE_COLUMN 0

keyboards/emajesty/eiri/eiri.c

@@ -0,0 +1,17 @@
+/* Copyright 2020 EMajesty
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include "eiri.h"

keyboards/emajesty/eiri/eiri.h

@@ -0,0 +1,40 @@
+/* Copyright 2020 EMajesty
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+#include "quantum.h"
+
+/* This is a shortcut to help you visually see your layout.
+ *
+ * The first section contains all of the arguments representing the physical
+ * layout of the board and position of the keys.
+ *
+ * The second converts the arguments into a two-dimensional array which
+ * represents the switch matrix.
+ */
+#define LAYOUT( \
+    K00, K01, K02, K03, K04, K05,               K06, K07, K08, K09, K10, K11, \
+    K12, K13, K14, K15, K16, K17,               K18, K19, K20, K21, K22, K23, \
+    K24, K25, K26, K27, K28, K29,               K30, K31, K32, K33, K34, K35, \
+              K36, K37, K38, K39, K40,     K41, K42, K43, K44, K45 \
+) { \
+    { K00,   K01, K02, K03, K04, K05, K06, K07, K08, K09, K10, K11   }, \
+    { K12,   K13, K14, K15, K16, K17, K18, K19, K20, K21, K22, K23   }, \
+    { K24,   K25, K26, K27, K28, K29, K30, K31, K32, K33, K34, K35   }, \
+    { KC_NO, K36, K37, K38, K39, K40, K41, K42, K43, K44, K45, KC_NO } \
+}
+

keyboards/emajesty/eiri/info.json

@@ -0,0 +1,12 @@
+{
+    "keyboard_name": "eiri",
+    "url": "https://github.com/EMajesty/eiri",
+    "maintainer": "EMajesty",
+    "width": 15,
+    "height": 4.5,
+    "layouts": {
+        "LAYOUT": {
+            "layout": [{"x":3, "y":0}, {"x":11, "y":0}, {"x":2, "y":0.25}, {"x":4, "y":0.25}, {"x":10, "y":0.25}, {"x":12, "y":0.25}, {"x":1, "y":0.5}, {"x":5, "y":0.5}, {"x":9, "y":0.5}, {"x":13, "y":0.5}, {"x":0, "y":0.75}, {"x":14, "y":0.75}, {"x":3, "y":1}, {"x":11, "y":1}, {"x":2, "y":1.25}, {"x":4, "y":1.25}, {"x":10, "y":1.25}, {"x":12, "y":1.25}, {"x":1, "y":1.5}, {"x":5, "y":1.5}, {"x":9, "y":1.5}, {"x":13, "y":1.5}, {"x":0, "y":1.75}, {"x":14, "y":1.75}, {"x":3, "y":2}, {"x":11, "y":2}, {"x":2, "y":2.25}, {"x":4, "y":2.25}, {"x":10, "y":2.25}, {"x":12, "y":2.25}, {"x":1, "y":2.5}, {"x":5, "y":2.5}, {"x":9, "y":2.5}, {"x":13, "y":2.5}, {"x":0, "y":2.75}, {"x":14, "y":2.75}, {"x":3, "y":3}, {"x":11, "y":3}, {"x":2, "y":3.25}, {"x":4, "y":3.25}, {"x":10, "y":3.25}, {"x":12, "y":3.25}, {"x":5, "y":3.5}, {"x":6, "y":3.5}, {"x":8, "y":3.5}, {"x":9, "y":3.5}]
+        }
+    }
+}

keyboards/emajesty/eiri/keymaps/default/keymap.c

@@ -0,0 +1,34 @@
+/* Copyright 2020 EMajesty
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+    [0] = LAYOUT(
+        KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,                           KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_BSLS,
+        KC_LCTL, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,                           KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT,
+        KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,                           KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_RSFT,
+                          KC_LGUI, KC_LALT, KC_SPC,  KC_DEL,  MO(1),        MO(2),   KC_ENT, KC_BSPC, KC_RALT, KC_RGUI),
+    [1] = LAYOUT(
+        KC_ESC,  _______, KC_UP,   _______, KC_HOME, KC_PGUP,                        _______, _______, _______, KC_LPRN, KC_RPRN, KC_GRV,
+        _______, KC_LEFT, KC_DOWN, KC_RGHT, KC_END,  KC_PGDN,                        _______, KC_MINS, KC_EQL,  KC_LBRC, KC_RBRC, _______,
+        _______, KC_MPRV, KC_MPLY, KC_MNXT, _______, _______,                        _______, _______, _______, KC_LCBR, KC_RCBR, _______,
+                          _______, _______, _______, _______, _______,      _______, _______, _______, _______, _______),
+    [2] = LAYOUT(
+        RESET,   KC_1,    KC_2,    KC_3,    KC_4,    KC_5,                           KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    _______,
+        _______, KC_EXLM, KC_AT,   KC_HASH, KC_DLR,  KC_PERC,                        KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, _______,
+        KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,                          KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,
+                          _______, _______, _______, _______, _______,      _______, _______, _______, _______, _______)
+};

keyboards/emajesty/eiri/keymaps/default/readme.md

@@ -0,0 +1,3 @@
+![default keymap](https://imgur.com/F3L3z8w.png)
+
+# The default keymap for eiri

keyboards/emajesty/eiri/readme.md

@@ -0,0 +1,19 @@
+# eiri
+
+![eiri](https://imgur.com/ZiLTj3Pl.png)
+
+An Atreus-inspired 40% keyboard with 6 columns
+
+* Keyboard Maintainer: [EMajesty](https://github.com/EMajesty)
+* Hardware Supported: eiri pcb
+* Hardware Availability: [Project is open source](https://github.com/EMajesty/eiri)
+
+Make example for this keyboard (after setting up your build environment):
+
+    make emajesty/eiri:default
+
+Flashing example for this keyboard:
+
+    make emajesty/eiri:default:flash
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

keyboards/emajesty/eiri/rules.mk

@@ -0,0 +1,22 @@
+# MCU name
+MCU = atmega32u4
+
+# Bootloader selection
+BOOTLOADER = caterina
+
+# Build Options
+#   change yes to no to disable
+#
+BOOTMAGIC_ENABLE = lite     # Virtual DIP switch configuration
+MOUSEKEY_ENABLE = yes       # Mouse keys
+EXTRAKEY_ENABLE = yes       # Audio control and System control
+CONSOLE_ENABLE = no         # Console for debug
+COMMAND_ENABLE = no         # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = no            # USB Nkey Rollover
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
+RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
+BLUETOOTH_ENABLE = no       # Enable Bluetooth
+AUDIO_ENABLE = no           # Audio output

keyboards/ergodox_infinity/matrix.c

@@ -24,6 +24,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #include "print.h"
 #include "debug.h"
 #include "matrix.h"
+#include "eeconfig.h"
 #include "serial_link/system/serial_link.h"
 
 
@@ -118,8 +119,12 @@ uint8_t matrix_scan(void)
     }
 
     uint8_t offset = 0;
-#ifdef MASTER_IS_ON_RIGHT
+#if (defined(EE_HANDS) || defined(MASTER_IS_ON_RIGHT))
+#ifdef EE_HANDS
+    if (is_serial_link_master() && !eeconfig_read_handedness()) {
+#else
     if (is_serial_link_master()) {
+#endif
         offset = MATRIX_ROWS - LOCAL_MATRIX_ROWS;
     }
 #endif
@@ -162,7 +167,13 @@ void matrix_print(void)
 
 void matrix_set_remote(matrix_row_t* rows, uint8_t index) {
     uint8_t offset = 0;
-#ifdef MASTER_IS_ON_RIGHT
+#ifdef EE_HANDS
+    if (eeconfig_read_handedness()) {
+        offset = LOCAL_MATRIX_ROWS * (index + 1);
+    } else {
+        offset = MATRIX_ROWS - LOCAL_MATRIX_ROWS * (index + 2);
+    }
+#elif defined(MASTER_IS_ON_RIGHT)
     offset = MATRIX_ROWS - LOCAL_MATRIX_ROWS * (index + 2);
 #else
     offset = LOCAL_MATRIX_ROWS * (index + 1);

keyboards/ergodox_infinity/readme.md

@@ -29,6 +29,9 @@ Input Club Infinity Ergodox](https://github.com/fredizzimo/infinity_ergodox/blob
 The Infinity is two completely independent keyboards, that can connect together.
 You have a few options in how you flash the firmware:
 
+- Add `#define EE_HANDS` to your config.h, initialize the EEPROM values (see below),
+  and then flash the same firmware to both halves.
+
 - Flash the left half, rebuild the firmware with "MASTER=right" and then flash
   the right half.  This allows you to plug in either half directly to the
   computer and is what the above instructions do.
@@ -43,6 +46,35 @@ You have a few options in how you flash the firmware:
   directly connect the right half to the computer.
 
 - For minor changes such as changing only the keymap without having updated
-  any part of the firmware code itself, you can program only the MASTER half.
+  any part of the firmware code itself, you can program only the MASTER half,
+  but it is safest to program both halves.
+
+### EE_HANDS initialization
+
+To initialize the EEPROM values for `EE_HANDS` to work properly, these steps should work.
+They only need to be done once, unless you reset the EEPROM later.
+
+  - Plug in the left keyboard half to the computer, and press its program button.
+
+  - Flash the left half with `make ergodox_infinity:default:dfu-util-split-left`
+    (If you need to use a different method to flash your keyboard, still run this command,
+    and abort it with Ctrl+C when the flashing attempts starts to print errors,
+    then flash the built firmware).
+
+  - On the left half, press the top vertical 1.5U key (second from the top in the rightmost column) once,
+    then the 1U key at the bottom in the opposite corner (bottom left corner).
+
+  - Plug in the right keyboard half to the computer, and press its program button.
+
+  - Flash the right half with `make ergodox_infinity:default:dfu-util-split-right`
+
+  - On the right half, press the top vertical 1.5U key (second from the top in the leftmost column) once,
+    then the 1U key at the bottom in the opposite corner (bottom right corner).
+
+  - Add `#define EE_HANDS` to the config.h file of your keymap, and build your firmware using
+    `make ergodox_infinity:keymapname`.
+
+  - After this, you can flash both halves with the same firmware, _without_ having to rebuild with
+    "MASTER=right" or risking a mirrored keyboard when connected the wrong way.
+    If you reset your EEPROM later, you'll have to follow these steps again, though.
 
-- It is safest to program both halves though.

keyboards/handwired/leftynumpad/config.h

@@ -0,0 +1,102 @@
+/*
+Copyright 2020 Tom Swartz
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID 0xFEED
+#define PRODUCT_ID 0xBEEF
+#define DEVICE_VER 0x0001
+#define MANUFACTURER Tom Swartz
+#define PRODUCT LeftyNumpad
+/* key matrix size */
+#define MATRIX_ROWS 5
+#define MATRIX_COLS 5
+
+/*
+ * Keyboard Matrix Assignments
+ *
+ * Change this to how you wired your keyboard
+ * COLS: AVR pins used for columns, left to right
+ * ROWS: AVR pins used for rows, top to bottom
+ * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
+ *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
+ *
+ */
+#define MATRIX_ROW_PINS { D1, D0, D4, C6, D7 }
+#define MATRIX_COL_PINS { E6, B4, B5, B6, B2 }
+#define UNUSED_PINS {D3, D2, B0, D5, B3, B1, F7, F6, F5, F4 }
+
+/* COL2ROW, ROW2COL*/
+#define DIODE_DIRECTION COL2ROW
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCE 10
+
+/* define if matrix has ghost (lacks anti-ghosting diodes) */
+//#define MATRIX_HAS_GHOST
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
+ * This is userful for the Windows task manager shortcut (ctrl+shift+esc).
+ */
+// #define GRAVE_ESC_CTRL_OVERRIDE
+
+/*
+ * Force NKRO
+ *
+ * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
+ * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
+ * makefile for this to work.)
+ *
+ * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
+ * until the next keyboard reset.
+ *
+ * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
+ * fully operational during normal computer usage.
+ *
+ * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
+ * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
+ * bootmagic, NKRO mode will always be enabled until it is toggled again during a
+ * power-up.
+ *
+ */
+//#define FORCE_NKRO
+/*
+ * Feature disable options
+ *  These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+//#define NO_DEBUG
+
+/* disable print */
+//#define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+
+/* disable these deprecated features by default */
+#define NO_ACTION_MACRO
+#define NO_ACTION_FUNCTION

keyboards/handwired/leftynumpad/info.json

@@ -0,0 +1,36 @@
+{
+    "keyboard_name": "LeftyNumpad",
+    "url": "https://github.com/tomswartz07",
+    "maintainer": "Tom Swartz",
+    "width": 5,
+    "height": 5,
+    "layouts": {
+        "LAYOUT": {
+            "layout": [
+                    {"label":"0,0", "x":0, "y":0},
+                    {"label":"1,0", "x":1, "y":0},
+                    {"label":"2,0", "x":2, "y":0},
+                    {"label":"3,0", "x":3, "y":0},
+                    {"label":"4,0", "x":4, "y":0},
+                    {"label":"0,1", "x":0, "y":1},
+                    {"label":"1,1", "x":1, "y":1},
+                    {"label":"2,1", "x":2, "y":1},
+                    {"label":"3,1", "x":3, "y":1},
+                    {"label":"0,2", "x":0, "y":2},
+                    {"label":"1,2", "x":1, "y":2},
+                    {"label":"2,2", "x":2, "y":2},
+                    {"label":"3,2", "x":3, "y":2},
+                    {"label":"5,1", "x":4, "y":1, "h":2},
+                    {"label":"0,3", "x":0, "y":3},
+                    {"label":"1,3", "x":1, "y":3},
+                    {"label":"2,3", "x":2, "y":3},
+                    {"label":"3,3", "x":3, "y":3},
+                    {"label":"0,4", "x":0, "y":4},
+                    {"label":"1,4", "x":1, "y":4},
+                    {"label":"2,4", "x":2, "y":4},
+                    {"label":"3,4", "x":3, "y":4},
+                    {"label":"4,3", "x":4, "y":3, "h":2}
+            ]
+        }
+    }
+}

keyboards/handwired/leftynumpad/keymaps/default/keymap.c

@@ -0,0 +1,92 @@
+/* Copyright 2020 Tom Swartz
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+
+// Defines names for use in layer keycodes and the keymap
+enum layer_names {
+    _NP,
+    _FN
+};
+
+// Defines the keycodes used by our macros in process_record_user
+enum custom_keycodes {
+    KC_00 = SAFE_RANGE,
+};
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+/* NumberPad Layer
+    ,---------------------------------------.
+    | Back  | Num   | /     | *     | -     |
+    | Space | Lock  |       |       |       |
+    |-------+-------+-------+-------+-------|
+    | Tab   | 7     | 8     | 9     | +     |
+    |       | Home  | Up    | PgUp  |       |
+    |-------+-------+-------+-------|       |
+    | Layer | 4     | 5     | 6     |       |
+    | Toggle| Left  |       | Right |       |
+    |-------+-------+-------+-------+-------|
+    | Page  | 1     | 2     | 3     | Enter |
+    | Up    | End   | Down  | PgDn  |       |
+    |-------+-------+-------+-------|       |
+    | Page  | 00    | 0     | .     |       |
+    | Down  |       |       |       |       |
+    `---------------------------------------'
+*/
+    [_NP] = LAYOUT(
+        KC_BSPC,   KC_NLCK, KC_PSLS, KC_PAST, KC_PMNS,
+        KC_TAB,    KC_7,    KC_8,   KC_9,
+        TG(_NP),   KC_4,    KC_5,   KC_6,    KC_PPLS,
+        KC_PGUP,   KC_1,    KC_2,   KC_3,
+        KC_PGDOWN, KC_00,   KC_0,   KC_PDOT, KC_PENT
+    ),
+/* Macropad/Function Layer
+    ,---------------------------------------.
+    | `~    | Play  | F13   | Prev  | Next  |
+    |       | Pause |       |       |       |
+    |-------+-------+-------+-------+-------|
+    | Tab   | F14   | F15   | 9     | +     |
+    |       |       |       | PgUp  |       |
+    |-------+-------+-------+-------|       |
+    | Layer | 4     | 5     | 6     |       |
+    | Toggle| Left  |       | Right |       |
+    |-------+-------+-------+-------+-------|
+    | U     | B     | 2     | 3     | Enter |
+    |       |       | Down  | PgDn  |       |
+    |-------+-------+-------+-------|       |
+    | D     | F     | 0     | .     |       |
+    |       |       |       |       |       |
+    `---------------------------------------'
+*/
+    [_FN] = LAYOUT(
+        KC_GRV,  KC_MPLY, KC_F13,  KC_MPRV, KC_MNXT,
+        _______, KC_F14,  KC_F15,  _______,
+        _______, _______, _______, _______, _______,
+        KC_U,    KC_B,    _______, _______,
+        KC_D,    KC_F,    _______, _______, _______
+    ),
+};
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+    switch (keycode) {
+        case KC_00:
+            if (record->event.pressed) {
+                // when keycode DOUBLEZERO is pressed
+                SEND_STRING("00");
+            }
+            break;
+    }
+    return true;
+}

keyboards/handwired/leftynumpad/keymaps/default/readme.md

@@ -0,0 +1,21 @@
+# The default keymap for LeftyNumpad
+
+## Base Layer
+```
+    ,---------------------------------------.
+    | Back  | Num   | /     | *     | -     |
+    | Space | Lock  |       |       |       |
+    |-------+-------+-------+-------+-------|
+    | Layer | 7     | 8     | 9     | +     |
+    | Up    | Home  | Up    | PgUp  |       |
+    |-------+-------+-------+-------|       |
+    | Layer | 4     | 5     | 6     |       |
+    | Down  | Left  |       | Right |       |
+    |-------+-------+-------+-------+-------|
+    | Page  | 1     | 2     | 3     | Enter |
+    | Up    | End   | Down  | PgDn  |       |
+    |-------+-------+-------+-------|       |
+    | Page  | 00    | 0     | .     |       |
+    | Down  |       |       |       |       |
+    `---------------------------------------'
+```

keyboards/handwired/leftynumpad/leftynumpad.c

@@ -0,0 +1,17 @@
+/* Copyright 2020 Tom Swartz
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include "leftynumpad.h"

keyboards/handwired/leftynumpad/leftynumpad.h

@@ -0,0 +1,42 @@
+/* Copyright 2020 Tom Swartz
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+#include "quantum.h"
+
+/* This is a shortcut to help you visually see your layout.
+ *
+ * The first section contains all of the arguments representing the physical
+ * layout of the board and position of the keys.
+ *
+ * The second converts the arguments into a two-dimensional array which
+ * represents the switch matrix.
+ */
+#define LAYOUT( \
+   K05,  K15,  K25,  K35,  K45,  \
+   K04,  K14,  K24,  K34,        \
+   K03,  K13,  K23,  K33,  K43,  \
+   K02,  K12,  K22,  K32,        \
+   K01,  K11,  K21,  K31,  K41   \
+) \
+{ \
+ { K05,  K15,  K25,  K35,  K45 }, \
+ { K04,  K14,  K24,  K34       }, \
+ { K03,  K13,  K23,  K33,  K43 }, \
+ { K02,  K12,  K22,  K32       }, \
+ { K01,  K11,  K21,  K31,  K41 }  \
+}

keyboards/handwired/leftynumpad/readme.md

@@ -0,0 +1,16 @@
+# LeftyNumpad
+
+![Image of LeftyNumpad](https://i.imgur.com/kkSPIxpl.png)
+
+A small numberpad/macropad intended to be placed southpaw-style on the left
+side of a keyboard.
+
+* Keyboard Maintainer: [Tom Swartz](https://github.com/tomswartz07)
+* Hardware Supported: Handwired, Uses Arudino Micro.
+* Hardware Availability: Handwired hardware.
+
+Make example for this keyboard (after setting up your build environment):
+
+    make handwired/leftynumpad:default
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

keyboards/handwired/leftynumpad/rules.mk

@@ -0,0 +1,22 @@
+# MCU name
+MCU = atmega32u4
+
+# Bootloader selection
+BOOTLOADER = atmel-dfu
+
+# Build Options
+#   change yes to no to disable
+#
+BOOTMAGIC_ENABLE = lite     # Virtual DIP switch configuration
+MOUSEKEY_ENABLE = yes       # Mouse keys
+EXTRAKEY_ENABLE = yes       # Audio control and System control
+CONSOLE_ENABLE = no         # Console for debug
+COMMAND_ENABLE = no         # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = no            # USB Nkey Rollover
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
+RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
+BLUETOOTH_ENABLE = no       # Enable Bluetooth
+AUDIO_ENABLE = no           # Audio output

keyboards/handwired/onekey/bluepill/bootloader_defs.h

@@ -1,10 +0,0 @@
-/* Address for jumping to bootloader on STM32 chips. */
-/* It is chip dependent, the correct number can be looked up here (page 175):
- * http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf
- * This also requires a patch to chibios:
- *  <tmk_dir>/tmk_core/tool/chibios/ch-bootloader-jump.patch
- */
-
-// STM32F103* does NOT have an USB bootloader in ROM (only serial),
-//  so setting anything here does not make much sense
-#define STM32_BOOTLOADER_ADDRESS 0x80000000

keyboards/handwired/onekey/bluepill/rules.mk

@@ -1,13 +1,8 @@
 # MCU name
 MCU = STM32F103
 
-# GENERIC STM32F103C8T6 board - stm32duino bootloader
-MCU_LDSCRIPT = STM32F103x8_stm32duino_bootloader
-BOARD = STM32_F103_STM32DUINO
-
-DFU_ARGS = -d 1eaf:0003 -a2 -R
-DFU_SUFFIX_ARGS = -v 1eaf -p 0003
-
+# Bootloader selection
+BOOTLOADER = stm32duino
 
 # Enter lower-power sleep mode when on the ChibiOS idle thread
 OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE

keyboards/handwired/onekey/keymaps/pytest_nocpp/keymap.c

@@ -0,0 +1,23 @@
+#include QMK_KEYBOARD_H
+#include "audio.h"
+
+/* THIS FILE WAS GENERATED AND IS EXPERIMENTAL!
+ *
+ * This file was generated by qmk-compile-json. You may or may not want to
+ * edit it directly.
+ */
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+	[0] = LAYOUT(KC_ENTER)
+};
+
+void encoder_update_user(uint8_t index, bool clockwise) {
+	if (index == 0) {
+		if (clockwise) {
+			tap_code(KC_UP);
+		} else {
+			tap_code(KC_DOWN);
+		}
+	}
+
+};

keyboards/handwired/onekey/pytest/templates/keymap.json

@@ -0,0 +1,3 @@
+{
+  "documentation": "This file is a keymap.json file for handwired/onekey/pytest"
+}

keyboards/handwired/riblee_f401/chconf.h

@@ -1,714 +0,0 @@
-/*
-    ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio
-
-    Licensed under the Apache License, Version 2.0 (the "License");
-    you may not use this file except in compliance with the License.
-    You may obtain a copy of the License at
-
-        http://www.apache.org/licenses/LICENSE-2.0
-
-    Unless required by applicable law or agreed to in writing, software
-    distributed under the License is distributed on an "AS IS" BASIS,
-    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-    See the License for the specific language governing permissions and
-    limitations under the License.
-*/
-
-/**
- * @file    rt/templates/chconf.h
- * @brief   Configuration file template.
- * @details A copy of this file must be placed in each project directory, it
- *          contains the application specific kernel settings.
- *
- * @addtogroup config
- * @details Kernel related settings and hooks.
- * @{
- */
-
-#ifndef CHCONF_H
-#define CHCONF_H
-
-#define _CHIBIOS_RT_CONF_
-#define _CHIBIOS_RT_CONF_VER_6_0_
-
-/*===========================================================================*/
-/**
- * @name System timers settings
- * @{
- */
-/*===========================================================================*/
-
-/**
- * @brief   System time counter resolution.
- * @note    Allowed values are 16 or 32 bits.
- */
-#if !defined(CH_CFG_ST_RESOLUTION)
-#define CH_CFG_ST_RESOLUTION                32
-#endif
-
-/**
- * @brief   System tick frequency.
- * @details Frequency of the system timer that drives the system ticks. This
- *          setting also defines the system tick time unit.
- */
-#if !defined(CH_CFG_ST_FREQUENCY)
-#define CH_CFG_ST_FREQUENCY                 10000
-#endif
-
-/**
- * @brief   Time intervals data size.
- * @note    Allowed values are 16, 32 or 64 bits.
- */
-#if !defined(CH_CFG_INTERVALS_SIZE)
-#define CH_CFG_INTERVALS_SIZE               32
-#endif
-
-/**
- * @brief   Time types data size.
- * @note    Allowed values are 16 or 32 bits.
- */
-#if !defined(CH_CFG_TIME_TYPES_SIZE)
-#define CH_CFG_TIME_TYPES_SIZE              32
-#endif
-
-/**
- * @brief   Time delta constant for the tick-less mode.
- * @note    If this value is zero then the system uses the classic
- *          periodic tick. This value represents the minimum number
- *          of ticks that is safe to specify in a timeout directive.
- *          The value one is not valid, timeouts are rounded up to
- *          this value.
- */
-#if !defined(CH_CFG_ST_TIMEDELTA)
-#define CH_CFG_ST_TIMEDELTA                 2
-#endif
-
-/** @} */
-
-/*===========================================================================*/
-/**
- * @name Kernel parameters and options
- * @{
- */
-/*===========================================================================*/
-
-/**
- * @brief   Round robin interval.
- * @details This constant is the number of system ticks allowed for the
- *          threads before preemption occurs. Setting this value to zero
- *          disables the preemption for threads with equal priority and the
- *          round robin becomes cooperative. Note that higher priority
- *          threads can still preempt, the kernel is always preemptive.
- * @note    Disabling the round robin preemption makes the kernel more compact
- *          and generally faster.
- * @note    The round robin preemption is not supported in tickless mode and
- *          must be set to zero in that case.
- */
-#if !defined(CH_CFG_TIME_QUANTUM)
-#define CH_CFG_TIME_QUANTUM                 0
-#endif
-
-/**
- * @brief   Managed RAM size.
- * @details Size of the RAM area to be managed by the OS. If set to zero
- *          then the whole available RAM is used. The core memory is made
- *          available to the heap allocator and/or can be used directly through
- *          the simplified core memory allocator.
- *
- * @note    In order to let the OS manage the whole RAM the linker script must
- *          provide the @p __heap_base__ and @p __heap_end__ symbols.
- * @note    Requires @p CH_CFG_USE_MEMCORE.
- */
-#if !defined(CH_CFG_MEMCORE_SIZE)
-#define CH_CFG_MEMCORE_SIZE                 0
-#endif
-
-/**
- * @brief   Idle thread automatic spawn suppression.
- * @details When this option is activated the function @p chSysInit()
- *          does not spawn the idle thread. The application @p main()
- *          function becomes the idle thread and must implement an
- *          infinite loop.
- */
-#if !defined(CH_CFG_NO_IDLE_THREAD)
-#define CH_CFG_NO_IDLE_THREAD               FALSE
-#endif
-
-/** @} */
-
-/*===========================================================================*/
-/**
- * @name Performance options
- * @{
- */
-/*===========================================================================*/
-
-/**
- * @brief   OS optimization.
- * @details If enabled then time efficient rather than space efficient code
- *          is used when two possible implementations exist.
- *
- * @note    This is not related to the compiler optimization options.
- * @note    The default is @p TRUE.
- */
-#if !defined(CH_CFG_OPTIMIZE_SPEED)
-#define CH_CFG_OPTIMIZE_SPEED               TRUE
-#endif
-
-/** @} */
-
-/*===========================================================================*/
-/**
- * @name Subsystem options
- * @{
- */
-/*===========================================================================*/
-
-/**
- * @brief   Time Measurement APIs.
- * @details If enabled then the time measurement APIs are included in
- *          the kernel.
- *
- * @note    The default is @p TRUE.
- */
-#if !defined(CH_CFG_USE_TM)
-#define CH_CFG_USE_TM                       TRUE
-#endif
-
-/**
- * @brief   Threads registry APIs.
- * @details If enabled then the registry APIs are included in the kernel.
- *
- * @note    The default is @p TRUE.
- */
-#if !defined(CH_CFG_USE_REGISTRY)
-#define CH_CFG_USE_REGISTRY                 TRUE
-#endif
-
-/**
- * @brief   Threads synchronization APIs.
- * @details If enabled then the @p chThdWait() function is included in
- *          the kernel.
- *
- * @note    The default is @p TRUE.
- */
-#if !defined(CH_CFG_USE_WAITEXIT)
-#define CH_CFG_USE_WAITEXIT                 TRUE
-#endif
-
-/**
- * @brief   Semaphores APIs.
- * @details If enabled then the Semaphores APIs are included in the kernel.
- *
- * @note    The default is @p TRUE.
- */
-#if !defined(CH_CFG_USE_SEMAPHORES)
-#define CH_CFG_USE_SEMAPHORES               TRUE
-#endif
-
-/**
- * @brief   Semaphores queuing mode.
- * @details If enabled then the threads are enqueued on semaphores by
- *          priority rather than in FIFO order.
- *
- * @note    The default is @p FALSE. Enable this if you have special
- *          requirements.
- * @note    Requires @p CH_CFG_USE_SEMAPHORES.
- */
-#if !defined(CH_CFG_USE_SEMAPHORES_PRIORITY)
-#define CH_CFG_USE_SEMAPHORES_PRIORITY      FALSE
-#endif
-
-/**
- * @brief   Mutexes APIs.
- * @details If enabled then the mutexes APIs are included in the kernel.
- *
- * @note    The default is @p TRUE.
- */
-#if !defined(CH_CFG_USE_MUTEXES)
-#define CH_CFG_USE_MUTEXES                  TRUE
-#endif
-
-/**
- * @brief   Enables recursive behavior on mutexes.
- * @note    Recursive mutexes are heavier and have an increased
- *          memory footprint.
- *
- * @note    The default is @p FALSE.
- * @note    Requires @p CH_CFG_USE_MUTEXES.
- */
-#if !defined(CH_CFG_USE_MUTEXES_RECURSIVE)
-#define CH_CFG_USE_MUTEXES_RECURSIVE        FALSE
-#endif
-
-/**
- * @brief   Conditional Variables APIs.
- * @details If enabled then the conditional variables APIs are included
- *          in the kernel.
- *
- * @note    The default is @p TRUE.
- * @note    Requires @p CH_CFG_USE_MUTEXES.
- */
-#if !defined(CH_CFG_USE_CONDVARS)
-#define CH_CFG_USE_CONDVARS                 TRUE
-#endif
-
-/**
- * @brief   Conditional Variables APIs with timeout.
- * @details If enabled then the conditional variables APIs with timeout
- *          specification are included in the kernel.
- *
- * @note    The default is @p TRUE.
- * @note    Requires @p CH_CFG_USE_CONDVARS.
- */
-#if !defined(CH_CFG_USE_CONDVARS_TIMEOUT)
-#define CH_CFG_USE_CONDVARS_TIMEOUT         TRUE
-#endif
-
-/**
- * @brief   Events Flags APIs.
- * @details If enabled then the event flags APIs are included in the kernel.
- *
- * @note    The default is @p TRUE.
- */
-#if !defined(CH_CFG_USE_EVENTS)
-#define CH_CFG_USE_EVENTS                   TRUE
-#endif
-
-/**
- * @brief   Events Flags APIs with timeout.
- * @details If enabled then the events APIs with timeout specification
- *          are included in the kernel.
- *
- * @note    The default is @p TRUE.
- * @note    Requires @p CH_CFG_USE_EVENTS.
- */
-#if !defined(CH_CFG_USE_EVENTS_TIMEOUT)
-#define CH_CFG_USE_EVENTS_TIMEOUT           TRUE
-#endif
-
-/**
- * @brief   Synchronous Messages APIs.
- * @details If enabled then the synchronous messages APIs are included
- *          in the kernel.
- *
- * @note    The default is @p TRUE.
- */
-#if !defined(CH_CFG_USE_MESSAGES)
-#define CH_CFG_USE_MESSAGES                 TRUE
-#endif
-
-/**
- * @brief   Synchronous Messages queuing mode.
- * @details If enabled then messages are served by priority rather than in
- *          FIFO order.
- *
- * @note    The default is @p FALSE. Enable this if you have special
- *          requirements.
- * @note    Requires @p CH_CFG_USE_MESSAGES.
- */
-#if !defined(CH_CFG_USE_MESSAGES_PRIORITY)
-#define CH_CFG_USE_MESSAGES_PRIORITY        FALSE
-#endif
-
-/**
- * @brief   Mailboxes APIs.
- * @details If enabled then the asynchronous messages (mailboxes) APIs are
- *          included in the kernel.
- *
- * @note    The default is @p TRUE.
- * @note    Requires @p CH_CFG_USE_SEMAPHORES.
- */
-#if !defined(CH_CFG_USE_MAILBOXES)
-#define CH_CFG_USE_MAILBOXES                TRUE
-#endif
-
-/**
- * @brief   Core Memory Manager APIs.
- * @details If enabled then the core memory manager APIs are included
- *          in the kernel.
- *
- * @note    The default is @p TRUE.
- */
-#if !defined(CH_CFG_USE_MEMCORE)
-#define CH_CFG_USE_MEMCORE                  TRUE
-#endif
-
-/**
- * @brief   Heap Allocator APIs.
- * @details If enabled then the memory heap allocator APIs are included
- *          in the kernel.
- *
- * @note    The default is @p TRUE.
- * @note    Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or
- *          @p CH_CFG_USE_SEMAPHORES.
- * @note    Mutexes are recommended.
- */
-#if !defined(CH_CFG_USE_HEAP)
-#define CH_CFG_USE_HEAP                     TRUE
-#endif
-
-/**
- * @brief   Memory Pools Allocator APIs.
- * @details If enabled then the memory pools allocator APIs are included
- *          in the kernel.
- *
- * @note    The default is @p TRUE.
- */
-#if !defined(CH_CFG_USE_MEMPOOLS)
-#define CH_CFG_USE_MEMPOOLS                 TRUE
-#endif
-
-/**
- * @brief   Objects FIFOs APIs.
- * @details If enabled then the objects FIFOs APIs are included
- *          in the kernel.
- *
- * @note    The default is @p TRUE.
- */
-#if !defined(CH_CFG_USE_OBJ_FIFOS)
-#define CH_CFG_USE_OBJ_FIFOS                TRUE
-#endif
-
-/**
- * @brief   Pipes APIs.
- * @details If enabled then the pipes APIs are included
- *          in the kernel.
- *
- * @note    The default is @p TRUE.
- */
-#if !defined(CH_CFG_USE_PIPES)
-#define CH_CFG_USE_PIPES                    TRUE
-#endif
-
-/**
- * @brief   Dynamic Threads APIs.
- * @details If enabled then the dynamic threads creation APIs are included
- *          in the kernel.
- *
- * @note    The default is @p TRUE.
- * @note    Requires @p CH_CFG_USE_WAITEXIT.
- * @note    Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS.
- */
-#if !defined(CH_CFG_USE_DYNAMIC)
-#define CH_CFG_USE_DYNAMIC                  TRUE
-#endif
-
-/** @} */
-
-/*===========================================================================*/
-/**
- * @name Objects factory options
- * @{
- */
-/*===========================================================================*/
-
-/**
- * @brief   Objects Factory APIs.
- * @details If enabled then the objects factory APIs are included in the
- *          kernel.
- *
- * @note    The default is @p FALSE.
- */
-#if !defined(CH_CFG_USE_FACTORY)
-#define CH_CFG_USE_FACTORY                  TRUE
-#endif
-
-/**
- * @brief   Maximum length for object names.
- * @details If the specified length is zero then the name is stored by
- *          pointer but this could have unintended side effects.
- */
-#if !defined(CH_CFG_FACTORY_MAX_NAMES_LENGTH)
-#define CH_CFG_FACTORY_MAX_NAMES_LENGTH     8
-#endif
-
-/**
- * @brief   Enables the registry of generic objects.
- */
-#if !defined(CH_CFG_FACTORY_OBJECTS_REGISTRY)
-#define CH_CFG_FACTORY_OBJECTS_REGISTRY     TRUE
-#endif
-
-/**
- * @brief   Enables factory for generic buffers.
- */
-#if !defined(CH_CFG_FACTORY_GENERIC_BUFFERS)
-#define CH_CFG_FACTORY_GENERIC_BUFFERS      TRUE
-#endif
-
-/**
- * @brief   Enables factory for semaphores.
- */
-#if !defined(CH_CFG_FACTORY_SEMAPHORES)
-#define CH_CFG_FACTORY_SEMAPHORES           TRUE
-#endif
-
-/**
- * @brief   Enables factory for mailboxes.
- */
-#if !defined(CH_CFG_FACTORY_MAILBOXES)
-#define CH_CFG_FACTORY_MAILBOXES            TRUE
-#endif
-
-/**
- * @brief   Enables factory for objects FIFOs.
- */
-#if !defined(CH_CFG_FACTORY_OBJ_FIFOS)
-#define CH_CFG_FACTORY_OBJ_FIFOS            TRUE
-#endif
-
-/**
- * @brief   Enables factory for Pipes.
- */
-#if !defined(CH_CFG_FACTORY_PIPES) || defined(__DOXYGEN__)
-#define CH_CFG_FACTORY_PIPES                TRUE
-#endif
-
-/** @} */
-
-/*===========================================================================*/
-/**
- * @name Debug options
- * @{
- */
-/*===========================================================================*/
-
-/**
- * @brief   Debug option, kernel statistics.
- *
- * @note    The default is @p FALSE.
- */
-#if !defined(CH_DBG_STATISTICS)
-#define CH_DBG_STATISTICS                   FALSE
-#endif
-
-/**
- * @brief   Debug option, system state check.
- * @details If enabled the correct call protocol for system APIs is checked
- *          at runtime.
- *
- * @note    The default is @p FALSE.
- */
-#if !defined(CH_DBG_SYSTEM_STATE_CHECK)
-#define CH_DBG_SYSTEM_STATE_CHECK           FALSE
-#endif
-
-/**
- * @brief   Debug option, parameters checks.
- * @details If enabled then the checks on the API functions input
- *          parameters are activated.
- *
- * @note    The default is @p FALSE.
- */
-#if !defined(CH_DBG_ENABLE_CHECKS)
-#define CH_DBG_ENABLE_CHECKS                FALSE
-#endif
-
-/**
- * @brief   Debug option, consistency checks.
- * @details If enabled then all the assertions in the kernel code are
- *          activated. This includes consistency checks inside the kernel,
- *          runtime anomalies and port-defined checks.
- *
- * @note    The default is @p FALSE.
- */
-#if !defined(CH_DBG_ENABLE_ASSERTS)
-#define CH_DBG_ENABLE_ASSERTS               FALSE
-#endif
-
-/**
- * @brief   Debug option, trace buffer.
- * @details If enabled then the trace buffer is activated.
- *
- * @note    The default is @p CH_DBG_TRACE_MASK_DISABLED.
- */
-#if !defined(CH_DBG_TRACE_MASK)
-#define CH_DBG_TRACE_MASK                   CH_DBG_TRACE_MASK_DISABLED
-#endif
-
-/**
- * @brief   Trace buffer entries.
- * @note    The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is
- *          different from @p CH_DBG_TRACE_MASK_DISABLED.
- */
-#if !defined(CH_DBG_TRACE_BUFFER_SIZE)
-#define CH_DBG_TRACE_BUFFER_SIZE            128
-#endif
-
-/**
- * @brief   Debug option, stack checks.
- * @details If enabled then a runtime stack check is performed.
- *
- * @note    The default is @p FALSE.
- * @note    The stack check is performed in a architecture/port dependent way.
- *          It may not be implemented or some ports.
- * @note    The default failure mode is to halt the system with the global
- *          @p panic_msg variable set to @p NULL.
- */
-#if !defined(CH_DBG_ENABLE_STACK_CHECK)
-#define CH_DBG_ENABLE_STACK_CHECK           FALSE
-#endif
-
-/**
- * @brief   Debug option, stacks initialization.
- * @details If enabled then the threads working area is filled with a byte
- *          value when a thread is created. This can be useful for the
- *          runtime measurement of the used stack.
- *
- * @note    The default is @p FALSE.
- */
-#if !defined(CH_DBG_FILL_THREADS)
-#define CH_DBG_FILL_THREADS                 FALSE
-#endif
-
-/**
- * @brief   Debug option, threads profiling.
- * @details If enabled then a field is added to the @p thread_t structure that
- *          counts the system ticks occurred while executing the thread.
- *
- * @note    The default is @p FALSE.
- * @note    This debug option is not currently compatible with the
- *          tickless mode.
- */
-#if !defined(CH_DBG_THREADS_PROFILING)
-#define CH_DBG_THREADS_PROFILING            FALSE
-#endif
-
-/** @} */
-
-/*===========================================================================*/
-/**
- * @name Kernel hooks
- * @{
- */
-/*===========================================================================*/
-
-/**
- * @brief   System structure extension.
- * @details User fields added to the end of the @p ch_system_t structure.
- */
-#define CH_CFG_SYSTEM_EXTRA_FIELDS                                          \
-  /* Add threads custom fields here.*/
-
-/**
- * @brief   System initialization hook.
- * @details User initialization code added to the @p chSysInit() function
- *          just before interrupts are enabled globally.
- */
-#define CH_CFG_SYSTEM_INIT_HOOK() {                                         \
-  /* Add threads initialization code here.*/                                \
-}
-
-/**
- * @brief   Threads descriptor structure extension.
- * @details User fields added to the end of the @p thread_t structure.
- */
-#define CH_CFG_THREAD_EXTRA_FIELDS                                          \
-  /* Add threads custom fields here.*/
-
-/**
- * @brief   Threads initialization hook.
- * @details User initialization code added to the @p _thread_init() function.
- *
- * @note    It is invoked from within @p _thread_init() and implicitly from all
- *          the threads creation APIs.
- */
-#define CH_CFG_THREAD_INIT_HOOK(tp) {                                       \
-  /* Add threads initialization code here.*/                                \
-}
-
-/**
- * @brief   Threads finalization hook.
- * @details User finalization code added to the @p chThdExit() API.
- */
-#define CH_CFG_THREAD_EXIT_HOOK(tp) {                                       \
-  /* Add threads finalization code here.*/                                  \
-}
-
-/**
- * @brief   Context switch hook.
- * @details This hook is invoked just before switching between threads.
- */
-#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) {                              \
-  /* Context switch code here.*/                                            \
-}
-
-/**
- * @brief   ISR enter hook.
- */
-#define CH_CFG_IRQ_PROLOGUE_HOOK() {                                        \
-  /* IRQ prologue code here.*/                                              \
-}
-
-/**
- * @brief   ISR exit hook.
- */
-#define CH_CFG_IRQ_EPILOGUE_HOOK() {                                        \
-  /* IRQ epilogue code here.*/                                              \
-}
-
-/**
- * @brief   Idle thread enter hook.
- * @note    This hook is invoked within a critical zone, no OS functions
- *          should be invoked from here.
- * @note    This macro can be used to activate a power saving mode.
- */
-#define CH_CFG_IDLE_ENTER_HOOK() {                                          \
-  /* Idle-enter code here.*/                                                \
-}
-
-/**
- * @brief   Idle thread leave hook.
- * @note    This hook is invoked within a critical zone, no OS functions
- *          should be invoked from here.
- * @note    This macro can be used to deactivate a power saving mode.
- */
-#define CH_CFG_IDLE_LEAVE_HOOK() {                                          \
-  /* Idle-leave code here.*/                                                \
-}
-
-/**
- * @brief   Idle Loop hook.
- * @details This hook is continuously invoked by the idle thread loop.
- */
-#define CH_CFG_IDLE_LOOP_HOOK() {                                           \
-  /* Idle loop code here.*/                                                 \
-}
-
-/**
- * @brief   System tick event hook.
- * @details This hook is invoked in the system tick handler immediately
- *          after processing the virtual timers queue.
- */
-#define CH_CFG_SYSTEM_TICK_HOOK() {                                         \
-  /* System tick event code here.*/                                         \
-}
-
-/**
- * @brief   System halt hook.
- * @details This hook is invoked in case to a system halting error before
- *          the system is halted.
- */
-#define CH_CFG_SYSTEM_HALT_HOOK(reason) {                                   \
-  /* System halt code here.*/                                               \
-}
-
-/**
- * @brief   Trace hook.
- * @details This hook is invoked each time a new record is written in the
- *          trace buffer.
- */
-#define CH_CFG_TRACE_HOOK(tep) {                                            \
-  /* Trace code here.*/                                                     \
-}
-
-/** @} */
-
-/*===========================================================================*/
-/* Port-specific settings (override port settings defaulted in chcore.h).    */
-/*===========================================================================*/
-
-#endif  /* CHCONF_H */
-
-/** @} */

keyboards/handwired/riblee_f401/halconf.h

@@ -1,525 +0,0 @@
-/*
-    ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio
-
-    Licensed under the Apache License, Version 2.0 (the "License");
-    you may not use this file except in compliance with the License.
-    You may obtain a copy of the License at
-
-        http://www.apache.org/licenses/LICENSE-2.0
-
-    Unless required by applicable law or agreed to in writing, software
-    distributed under the License is distributed on an "AS IS" BASIS,
-    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-    See the License for the specific language governing permissions and
-    limitations under the License.
-*/
-
-/**
- * @file    templates/halconf.h
- * @brief   HAL configuration header.
- * @details HAL configuration file, this file allows to enable or disable the
- *          various device drivers from your application. You may also use
- *          this file in order to override the device drivers default settings.
- *
- * @addtogroup HAL_CONF
- * @{
- */
-
-#ifndef HALCONF_H
-#define HALCONF_H
-
-#define _CHIBIOS_HAL_CONF_
-#define _CHIBIOS_HAL_CONF_VER_7_0_
-
-#include "mcuconf.h"
-
-/**
- * @brief   Enables the PAL subsystem.
- */
-#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__)
-#define HAL_USE_PAL                         TRUE
-#endif
-
-/**
- * @brief   Enables the ADC subsystem.
- */
-#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__)
-#define HAL_USE_ADC                         FALSE
-#endif
-
-/**
- * @brief   Enables the CAN subsystem.
- */
-#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__)
-#define HAL_USE_CAN                         FALSE
-#endif
-
-/**
- * @brief   Enables the cryptographic subsystem.
- */
-#if !defined(HAL_USE_CRY) || defined(__DOXYGEN__)
-#define HAL_USE_CRY                         FALSE
-#endif
-
-/**
- * @brief   Enables the DAC subsystem.
- */
-#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__)
-#define HAL_USE_DAC                         FALSE
-#endif
-
-/**
- * @brief   Enables the GPT subsystem.
- */
-#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__)
-#define HAL_USE_GPT                         FALSE
-#endif
-
-/**
- * @brief   Enables the I2C subsystem.
- */
-#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__)
-#define HAL_USE_I2C                         FALSE
-#endif
-
-/**
- * @brief   Enables the I2S subsystem.
- */
-#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__)
-#define HAL_USE_I2S                         FALSE
-#endif
-
-/**
- * @brief   Enables the ICU subsystem.
- */
-#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__)
-#define HAL_USE_ICU                         FALSE
-#endif
-
-/**
- * @brief   Enables the MAC subsystem.
- */
-#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__)
-#define HAL_USE_MAC                         FALSE
-#endif
-
-/**
- * @brief   Enables the MMC_SPI subsystem.
- */
-#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__)
-#define HAL_USE_MMC_SPI                     FALSE
-#endif
-
-/**
- * @brief   Enables the PWM subsystem.
- */
-#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__)
-#define HAL_USE_PWM                         FALSE
-#endif
-
-/**
- * @brief   Enables the RTC subsystem.
- */
-#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__)
-#define HAL_USE_RTC                         FALSE
-#endif
-
-/**
- * @brief   Enables the SDC subsystem.
- */
-#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__)
-#define HAL_USE_SDC                         FALSE
-#endif
-
-/**
- * @brief   Enables the SERIAL subsystem.
- */
-#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__)
-#define HAL_USE_SERIAL                      FALSE
-#endif
-
-/**
- * @brief   Enables the SERIAL over USB subsystem.
- */
-#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__)
-#define HAL_USE_SERIAL_USB                  FALSE
-#endif
-
-/**
- * @brief   Enables the SIO subsystem.
- */
-#if !defined(HAL_USE_SIO) || defined(__DOXYGEN__)
-#define HAL_USE_SIO                         FALSE
-#endif
-
-/**
- * @brief   Enables the SPI subsystem.
- */
-#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__)
-#define HAL_USE_SPI                         FALSE
-#endif
-
-/**
- * @brief   Enables the TRNG subsystem.
- */
-#if !defined(HAL_USE_TRNG) || defined(__DOXYGEN__)
-#define HAL_USE_TRNG                        FALSE
-#endif
-
-/**
- * @brief   Enables the UART subsystem.
- */
-#if !defined(HAL_USE_UART) || defined(__DOXYGEN__)
-#define HAL_USE_UART                        FALSE
-#endif
-
-/**
- * @brief   Enables the USB subsystem.
- */
-#if !defined(HAL_USE_USB) || defined(__DOXYGEN__)
-#define HAL_USE_USB                         TRUE
-#endif
-
-/**
- * @brief   Enables the WDG subsystem.
- */
-#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__)
-#define HAL_USE_WDG                         FALSE
-#endif
-
-/**
- * @brief   Enables the WSPI subsystem.
- */
-#if !defined(HAL_USE_WSPI) || defined(__DOXYGEN__)
-#define HAL_USE_WSPI                        FALSE
-#endif
-
-/*===========================================================================*/
-/* PAL driver related settings.                                              */
-/*===========================================================================*/
-
-/**
- * @brief   Enables synchronous APIs.
- * @note    Disabling this option saves both code and data space.
- */
-#if !defined(PAL_USE_CALLBACKS) || defined(__DOXYGEN__)
-#define PAL_USE_CALLBACKS                   FALSE
-#endif
-
-/**
- * @brief   Enables synchronous APIs.
- * @note    Disabling this option saves both code and data space.
- */
-#if !defined(PAL_USE_WAIT) || defined(__DOXYGEN__)
-#define PAL_USE_WAIT                        FALSE
-#endif
-
-/*===========================================================================*/
-/* ADC driver related settings.                                              */
-/*===========================================================================*/
-
-/**
- * @brief   Enables synchronous APIs.
- * @note    Disabling this option saves both code and data space.
- */
-#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__)
-#define ADC_USE_WAIT                        TRUE
-#endif
-
-/**
- * @brief   Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs.
- * @note    Disabling this option saves both code and data space.
- */
-#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
-#define ADC_USE_MUTUAL_EXCLUSION            TRUE
-#endif
-
-/*===========================================================================*/
-/* CAN driver related settings.                                              */
-/*===========================================================================*/
-
-/**
- * @brief   Sleep mode related APIs inclusion switch.
- */
-#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__)
-#define CAN_USE_SLEEP_MODE                  TRUE
-#endif
-
-/**
- * @brief   Enforces the driver to use direct callbacks rather than OSAL events.
- */
-#if !defined(CAN_ENFORCE_USE_CALLBACKS) || defined(__DOXYGEN__)
-#define CAN_ENFORCE_USE_CALLBACKS           FALSE
-#endif
-
-/*===========================================================================*/
-/* CRY driver related settings.                                              */
-/*===========================================================================*/
-
-/**
- * @brief   Enables the SW fall-back of the cryptographic driver.
- * @details When enabled, this option, activates a fall-back software
- *          implementation for algorithms not supported by the underlying
- *          hardware.
- * @note    Fall-back implementations may not be present for all algorithms.
- */
-#if !defined(HAL_CRY_USE_FALLBACK) || defined(__DOXYGEN__)
-#define HAL_CRY_USE_FALLBACK                FALSE
-#endif
-
-/**
- * @brief   Makes the driver forcibly use the fall-back implementations.
- */
-#if !defined(HAL_CRY_ENFORCE_FALLBACK) || defined(__DOXYGEN__)
-#define HAL_CRY_ENFORCE_FALLBACK            FALSE
-#endif
-
-/*===========================================================================*/
-/* DAC driver related settings.                                              */
-/*===========================================================================*/
-
-/**
- * @brief   Enables synchronous APIs.
- * @note    Disabling this option saves both code and data space.
- */
-#if !defined(DAC_USE_WAIT) || defined(__DOXYGEN__)
-#define DAC_USE_WAIT                        TRUE
-#endif
-
-/**
- * @brief   Enables the @p dacAcquireBus() and @p dacReleaseBus() APIs.
- * @note    Disabling this option saves both code and data space.
- */
-#if !defined(DAC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
-#define DAC_USE_MUTUAL_EXCLUSION            TRUE
-#endif
-
-/*===========================================================================*/
-/* I2C driver related settings.                                              */
-/*===========================================================================*/
-
-/**
- * @brief   Enables the mutual exclusion APIs on the I2C bus.
- */
-#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
-#define I2C_USE_MUTUAL_EXCLUSION            TRUE
-#endif
-
-/*===========================================================================*/
-/* MAC driver related settings.                                              */
-/*===========================================================================*/
-
-/**
- * @brief   Enables the zero-copy API.
- */
-#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__)
-#define MAC_USE_ZERO_COPY                   FALSE
-#endif
-
-/**
- * @brief   Enables an event sources for incoming packets.
- */
-#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__)
-#define MAC_USE_EVENTS                      TRUE
-#endif
-
-/*===========================================================================*/
-/* MMC_SPI driver related settings.                                          */
-/*===========================================================================*/
-
-/**
- * @brief   Delays insertions.
- * @details If enabled this options inserts delays into the MMC waiting
- *          routines releasing some extra CPU time for the threads with
- *          lower priority, this may slow down the driver a bit however.
- *          This option is recommended also if the SPI driver does not
- *          use a DMA channel and heavily loads the CPU.
- */
-#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__)
-#define MMC_NICE_WAITING                    TRUE
-#endif
-
-/*===========================================================================*/
-/* SDC driver related settings.                                              */
-/*===========================================================================*/
-
-/**
- * @brief   Number of initialization attempts before rejecting the card.
- * @note    Attempts are performed at 10mS intervals.
- */
-#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__)
-#define SDC_INIT_RETRY                      100
-#endif
-
-/**
- * @brief   Include support for MMC cards.
- * @note    MMC support is not yet implemented so this option must be kept
- *          at @p FALSE.
- */
-#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__)
-#define SDC_MMC_SUPPORT                     FALSE
-#endif
-
-/**
- * @brief   Delays insertions.
- * @details If enabled this options inserts delays into the MMC waiting
- *          routines releasing some extra CPU time for the threads with
- *          lower priority, this may slow down the driver a bit however.
- */
-#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__)
-#define SDC_NICE_WAITING                    TRUE
-#endif
-
-/**
- * @brief   OCR initialization constant for V20 cards.
- */
-#if !defined(SDC_INIT_OCR_V20) || defined(__DOXYGEN__)
-#define SDC_INIT_OCR_V20                    0x50FF8000U
-#endif
-
-/**
- * @brief   OCR initialization constant for non-V20 cards.
- */
-#if !defined(SDC_INIT_OCR) || defined(__DOXYGEN__)
-#define SDC_INIT_OCR                        0x80100000U
-#endif
-
-/*===========================================================================*/
-/* SERIAL driver related settings.                                           */
-/*===========================================================================*/
-
-/**
- * @brief   Default bit rate.
- * @details Configuration parameter, this is the baud rate selected for the
- *          default configuration.
- */
-#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__)
-#define SERIAL_DEFAULT_BITRATE              38400
-#endif
-
-/**
- * @brief   Serial buffers size.
- * @details Configuration parameter, you can change the depth of the queue
- *          buffers depending on the requirements of your application.
- * @note    The default is 16 bytes for both the transmission and receive
- *          buffers.
- */
-#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__)
-#define SERIAL_BUFFERS_SIZE                 16
-#endif
-
-/*===========================================================================*/
-/* SERIAL_USB driver related setting.                                        */
-/*===========================================================================*/
-
-/**
- * @brief   Serial over USB buffers size.
- * @details Configuration parameter, the buffer size must be a multiple of
- *          the USB data endpoint maximum packet size.
- * @note    The default is 256 bytes for both the transmission and receive
- *          buffers.
- */
-#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__)
-#define SERIAL_USB_BUFFERS_SIZE             256
-#endif
-
-/**
- * @brief   Serial over USB number of buffers.
- * @note    The default is 2 buffers.
- */
-#if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__)
-#define SERIAL_USB_BUFFERS_NUMBER           2
-#endif
-
-/*===========================================================================*/
-/* SPI driver related settings.                                              */
-/*===========================================================================*/
-
-/**
- * @brief   Enables synchronous APIs.
- * @note    Disabling this option saves both code and data space.
- */
-#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__)
-#define SPI_USE_WAIT                        TRUE
-#endif
-
-/**
- * @brief   Enables circular transfers APIs.
- * @note    Disabling this option saves both code and data space.
- */
-#if !defined(SPI_USE_CIRCULAR) || defined(__DOXYGEN__)
-#define SPI_USE_CIRCULAR                    FALSE
-#endif
-
-
-/**
- * @brief   Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs.
- * @note    Disabling this option saves both code and data space.
- */
-#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
-#define SPI_USE_MUTUAL_EXCLUSION            TRUE
-#endif
-
-/**
- * @brief   Handling method for SPI CS line.
- * @note    Disabling this option saves both code and data space.
- */
-#if !defined(SPI_SELECT_MODE) || defined(__DOXYGEN__)
-#define SPI_SELECT_MODE                     SPI_SELECT_MODE_PAD
-#endif
-
-/*===========================================================================*/
-/* UART driver related settings.                                             */
-/*===========================================================================*/
-
-/**
- * @brief   Enables synchronous APIs.
- * @note    Disabling this option saves both code and data space.
- */
-#if !defined(UART_USE_WAIT) || defined(__DOXYGEN__)
-#define UART_USE_WAIT                       FALSE
-#endif
-
-/**
- * @brief   Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs.
- * @note    Disabling this option saves both code and data space.
- */
-#if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
-#define UART_USE_MUTUAL_EXCLUSION           FALSE
-#endif
-
-/*===========================================================================*/
-/* USB driver related settings.                                              */
-/*===========================================================================*/
-
-/**
- * @brief   Enables synchronous APIs.
- * @note    Disabling this option saves both code and data space.
- */
-#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__)
-#define USB_USE_WAIT                        TRUE
-#endif
-
-/*===========================================================================*/
-/* WSPI driver related settings.                                             */
-/*===========================================================================*/
-
-/**
- * @brief   Enables synchronous APIs.
- * @note    Disabling this option saves both code and data space.
- */
-#if !defined(WSPI_USE_WAIT) || defined(__DOXYGEN__)
-#define WSPI_USE_WAIT                       TRUE
-#endif
-
-/**
- * @brief   Enables the @p wspiAcquireBus() and @p wspiReleaseBus() APIs.
- * @note    Disabling this option saves both code and data space.
- */
-#if !defined(WSPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
-#define WSPI_USE_MUTUAL_EXCLUSION           TRUE
-#endif
-
-#endif /* HALCONF_H */
-
-/** @} */

keyboards/handwired/riblee_f401/mcuconf.h

@@ -1,253 +0,0 @@
-/*
-    ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio
-
-    Licensed under the Apache License, Version 2.0 (the "License");
-    you may not use this file except in compliance with the License.
-    You may obtain a copy of the License at
-
-        http://www.apache.org/licenses/LICENSE-2.0
-
-    Unless required by applicable law or agreed to in writing, software
-    distributed under the License is distributed on an "AS IS" BASIS,
-    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-    See the License for the specific language governing permissions and
-    limitations under the License.
-*/
-
-#ifndef MCUCONF_H
-#define MCUCONF_H
-
-/*
- * STM32F4xx drivers configuration.
- * The following settings override the default settings present in
- * the various device driver implementation headers.
- * Note that the settings for each driver only have effect if the whole
- * driver is enabled in halconf.h.
- *
- * IRQ priorities:
- * 15...0       Lowest...Highest.
- *
- * DMA priorities:
- * 0...3        Lowest...Highest.
- */
-
-#define STM32F4xx_MCUCONF
-
-/*
- * HAL driver system settings.
- */
-#define STM32_NO_INIT                       FALSE
-#define STM32_HSI_ENABLED                   TRUE
-#define STM32_LSI_ENABLED                   TRUE
-#define STM32_HSE_ENABLED                   TRUE
-#define STM32_LSE_ENABLED                   FALSE
-#define STM32_CLOCK48_REQUIRED              TRUE
-#define STM32_SW                            STM32_SW_PLL
-#define STM32_PLLSRC                        STM32_PLLSRC_HSE
-#define STM32_PLLM_VALUE                    25       
-#define STM32_PLLN_VALUE                    336     
-#define STM32_PLLP_VALUE                    4       
-#define STM32_PLLQ_VALUE                    7       
-#define STM32_HPRE                          STM32_HPRE_DIV1  
-#define STM32_PPRE1                         STM32_PPRE1_DIV4  
-#define STM32_PPRE2                         STM32_PPRE2_DIV2 
-#define STM32_RTCSEL                        STM32_RTCSEL_LSI
-#define STM32_RTCPRE_VALUE                  8
-#define STM32_MCO1SEL                       STM32_MCO1SEL_HSI
-#define STM32_MCO1PRE                       STM32_MCO1PRE_DIV1
-#define STM32_MCO2SEL                       STM32_MCO2SEL_SYSCLK
-#define STM32_MCO2PRE                       STM32_MCO2PRE_DIV5
-#define STM32_I2SSRC                        STM32_I2SSRC_CKIN
-#define STM32_PLLI2SN_VALUE                 192
-#define STM32_PLLI2SR_VALUE                 5
-#define STM32_PVD_ENABLE                    FALSE
-#define STM32_PLS                           STM32_PLS_LEV0
-#define STM32_BKPRAM_ENABLE                 FALSE
-
-/*
- * IRQ system settings.
- */
-#define STM32_IRQ_EXTI0_PRIORITY            6
-#define STM32_IRQ_EXTI1_PRIORITY            6
-#define STM32_IRQ_EXTI2_PRIORITY            6
-#define STM32_IRQ_EXTI3_PRIORITY            6
-#define STM32_IRQ_EXTI4_PRIORITY            6
-#define STM32_IRQ_EXTI5_9_PRIORITY          6
-#define STM32_IRQ_EXTI10_15_PRIORITY        6
-#define STM32_IRQ_EXTI16_PRIORITY           6
-#define STM32_IRQ_EXTI17_PRIORITY           15
-#define STM32_IRQ_EXTI18_PRIORITY           6
-#define STM32_IRQ_EXTI19_PRIORITY           6
-#define STM32_IRQ_EXTI20_PRIORITY           6
-#define STM32_IRQ_EXTI21_PRIORITY           15
-#define STM32_IRQ_EXTI22_PRIORITY           15
-
-/*
- * ADC driver system settings.
- */
-#define STM32_ADC_ADCPRE                    ADC_CCR_ADCPRE_DIV4
-#define STM32_ADC_USE_ADC1                  FALSE
-#define STM32_ADC_ADC1_DMA_STREAM           STM32_DMA_STREAM_ID(2, 4)
-#define STM32_ADC_ADC1_DMA_PRIORITY         2
-#define STM32_ADC_IRQ_PRIORITY              6
-#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY     6
-
-/*
- * GPT driver system settings.
- */
-#define STM32_GPT_USE_TIM1                  FALSE
-#define STM32_GPT_USE_TIM2                  FALSE
-#define STM32_GPT_USE_TIM3                  FALSE
-#define STM32_GPT_USE_TIM4                  FALSE
-#define STM32_GPT_USE_TIM5                  FALSE
-#define STM32_GPT_USE_TIM9                  FALSE
-#define STM32_GPT_USE_TIM11                 FALSE
-#define STM32_GPT_TIM1_IRQ_PRIORITY         7
-#define STM32_GPT_TIM2_IRQ_PRIORITY         7
-#define STM32_GPT_TIM3_IRQ_PRIORITY         7
-#define STM32_GPT_TIM4_IRQ_PRIORITY         7
-#define STM32_GPT_TIM5_IRQ_PRIORITY         7
-#define STM32_GPT_TIM9_IRQ_PRIORITY         7
-#define STM32_GPT_TIM11_IRQ_PRIORITY        7
-
-/*
- * I2C driver system settings.
- */
-#define STM32_I2C_USE_I2C1                  FALSE
-#define STM32_I2C_USE_I2C2                  FALSE
-#define STM32_I2C_USE_I2C3                  FALSE
-#define STM32_I2C_BUSY_TIMEOUT              50
-#define STM32_I2C_I2C1_RX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 0)
-#define STM32_I2C_I2C1_TX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 6)
-#define STM32_I2C_I2C2_RX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 2)
-#define STM32_I2C_I2C2_TX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 7)
-#define STM32_I2C_I2C3_RX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 2)
-#define STM32_I2C_I2C3_TX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 4)
-#define STM32_I2C_I2C1_IRQ_PRIORITY         5
-#define STM32_I2C_I2C2_IRQ_PRIORITY         5
-#define STM32_I2C_I2C3_IRQ_PRIORITY         5
-#define STM32_I2C_I2C1_DMA_PRIORITY         3
-#define STM32_I2C_I2C2_DMA_PRIORITY         3
-#define STM32_I2C_I2C3_DMA_PRIORITY         3
-#define STM32_I2C_DMA_ERROR_HOOK(i2cp)      osalSysHalt("DMA failure")
-
-/*
- * I2S driver system settings.
- */
-#define STM32_I2S_USE_SPI2                  FALSE
-#define STM32_I2S_USE_SPI3                  FALSE
-#define STM32_I2S_SPI2_IRQ_PRIORITY         10
-#define STM32_I2S_SPI3_IRQ_PRIORITY         10
-#define STM32_I2S_SPI2_DMA_PRIORITY         1
-#define STM32_I2S_SPI3_DMA_PRIORITY         1
-#define STM32_I2S_SPI2_RX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 3)
-#define STM32_I2S_SPI2_TX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 4)
-#define STM32_I2S_SPI3_RX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 0)
-#define STM32_I2S_SPI3_TX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 7)
-#define STM32_I2S_DMA_ERROR_HOOK(i2sp)      osalSysHalt("DMA failure")
-
-/*
- * ICU driver system settings.
- */
-#define STM32_ICU_USE_TIM1                  FALSE
-#define STM32_ICU_USE_TIM2                  FALSE
-#define STM32_ICU_USE_TIM3                  FALSE
-#define STM32_ICU_USE_TIM4                  FALSE
-#define STM32_ICU_USE_TIM5                  FALSE
-#define STM32_ICU_USE_TIM9                  FALSE
-#define STM32_ICU_TIM1_IRQ_PRIORITY         7
-#define STM32_ICU_TIM2_IRQ_PRIORITY         7
-#define STM32_ICU_TIM3_IRQ_PRIORITY         7
-#define STM32_ICU_TIM4_IRQ_PRIORITY         7
-#define STM32_ICU_TIM5_IRQ_PRIORITY         7
-#define STM32_ICU_TIM9_IRQ_PRIORITY         7
-
-/*
- * PWM driver system settings.
- */
-#define STM32_PWM_USE_ADVANCED              FALSE
-#define STM32_PWM_USE_TIM1                  FALSE
-#define STM32_PWM_USE_TIM2                  FALSE
-#define STM32_PWM_USE_TIM3                  FALSE
-#define STM32_PWM_USE_TIM4                  FALSE
-#define STM32_PWM_USE_TIM5                  FALSE
-#define STM32_PWM_USE_TIM9                  FALSE
-#define STM32_PWM_TIM1_IRQ_PRIORITY         7
-#define STM32_PWM_TIM2_IRQ_PRIORITY         7
-#define STM32_PWM_TIM3_IRQ_PRIORITY         7
-#define STM32_PWM_TIM4_IRQ_PRIORITY         7
-#define STM32_PWM_TIM5_IRQ_PRIORITY         7
-#define STM32_PWM_TIM9_IRQ_PRIORITY         7
-
-/*
- * SERIAL driver system settings.
- */
-#define STM32_SERIAL_USE_USART1             FALSE
-#define STM32_SERIAL_USE_USART2             FALSE
-#define STM32_SERIAL_USE_USART6             FALSE
-#define STM32_SERIAL_USART1_PRIORITY        12
-#define STM32_SERIAL_USART2_PRIORITY        12
-#define STM32_SERIAL_USART6_PRIORITY        12
-
-/*
- * SPI driver system settings.
- */
-#define STM32_SPI_USE_SPI1                  FALSE
-#define STM32_SPI_USE_SPI2                  FALSE
-#define STM32_SPI_USE_SPI3                  FALSE
-#define STM32_SPI_SPI1_RX_DMA_STREAM        STM32_DMA_STREAM_ID(2, 0)
-#define STM32_SPI_SPI1_TX_DMA_STREAM        STM32_DMA_STREAM_ID(2, 3)
-#define STM32_SPI_SPI2_RX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 3)
-#define STM32_SPI_SPI2_TX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 4)
-#define STM32_SPI_SPI3_RX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 0)
-#define STM32_SPI_SPI3_TX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 7)
-#define STM32_SPI_SPI1_DMA_PRIORITY         1
-#define STM32_SPI_SPI2_DMA_PRIORITY         1
-#define STM32_SPI_SPI3_DMA_PRIORITY         1
-#define STM32_SPI_SPI1_IRQ_PRIORITY         10
-#define STM32_SPI_SPI2_IRQ_PRIORITY         10
-#define STM32_SPI_SPI3_IRQ_PRIORITY         10
-#define STM32_SPI_DMA_ERROR_HOOK(spip)      osalSysHalt("DMA failure")
-
-/*
- * ST driver system settings.
- */
-#define STM32_ST_IRQ_PRIORITY               8
-#define STM32_ST_USE_TIMER                  2
-
-/*
- * UART driver system settings.
- */
-#define STM32_UART_USE_USART1               FALSE
-#define STM32_UART_USE_USART2               FALSE
-#define STM32_UART_USE_USART6               FALSE
-#define STM32_UART_USART1_RX_DMA_STREAM     STM32_DMA_STREAM_ID(2, 5)
-#define STM32_UART_USART1_TX_DMA_STREAM     STM32_DMA_STREAM_ID(2, 7)
-#define STM32_UART_USART2_RX_DMA_STREAM     STM32_DMA_STREAM_ID(1, 5)
-#define STM32_UART_USART2_TX_DMA_STREAM     STM32_DMA_STREAM_ID(1, 6)
-#define STM32_UART_USART6_RX_DMA_STREAM     STM32_DMA_STREAM_ID(2, 2)
-#define STM32_UART_USART6_TX_DMA_STREAM     STM32_DMA_STREAM_ID(2, 7)
-#define STM32_UART_USART1_IRQ_PRIORITY      12
-#define STM32_UART_USART2_IRQ_PRIORITY      12
-#define STM32_UART_USART6_IRQ_PRIORITY      12
-#define STM32_UART_USART1_DMA_PRIORITY      0
-#define STM32_UART_USART2_DMA_PRIORITY      0
-#define STM32_UART_USART6_DMA_PRIORITY      0
-#define STM32_UART_DMA_ERROR_HOOK(uartp)    osalSysHalt("DMA failure")
-
-/*
- * USB driver system settings.
- */
-#define STM32_USB_USE_OTG1                  TRUE
-#define STM32_USB_OTG1_IRQ_PRIORITY         14
-#define STM32_USB_OTG1_RX_FIFO_SIZE         512
-#define STM32_USB_OTG_THREAD_PRIO           NORMALPRIO+1
-#define STM32_USB_OTG_THREAD_STACK_SIZE     128
-#define STM32_USB_OTGFIFO_FILL_BASEPRI      0
-
-/*
- * WDG driver system settings.
- */
-#define STM32_WDG_USE_IWDG                  FALSE
-
-#endif /* MCUCONF_H */

keyboards/handwired/riblee_f401/riblee_f401.h

@@ -1,5 +1,5 @@
 /*
-Copyright 2020 QMK Community, Daniel Reibl <janos.daniel.reibl@protonmail.com>
+Copyright 2020 QMK Community, Janos Daniel Reibl <janos.daniel.reibl@protonmail.com> @riblee
 
 This program is free software: you can redistribute it and/or modify
 it under the terms of the GNU General Public License as published by

keyboards/handwired/riblee_f401/rules.mk

@@ -22,3 +22,5 @@ BACKLIGHT_DRIVER = software
 RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
 BLUETOOTH_ENABLE = no       # Enable Bluetooth
 AUDIO_ENABLE = no           # Audio output
+
+LAYOUTS = ortho_5x12

keyboards/handwired/t111/rules.mk

@@ -1,12 +1,7 @@
 MCU = STM32F103
 
-# GENERIC STM32F103C8T6 board - stm32duino bootloader
-MCU_LDSCRIPT = STM32F103x8_stm32duino_bootloader
-BOARD = STM32_F103_STM32DUINO
-STM32_BOOTLOADER_ADDRESS = 0x80000000
-
-DFU_ARGS = -d 1EAF:0003 -a2 -R
-DFU_SUFFIX_ARGS = -v 1EAF -p 0003
+# Bootloader selection
+BOOTLOADER = stm32duino
 
 # Enter lower-power sleep mode when on the ChibiOS idle thread
 OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE

keyboards/handwired/z150/rules.mk

@@ -1,12 +1,7 @@
 MCU = STM32F103
 
-# GENERIC STM32F103C8T6 board - stm32duino bootloader
-MCU_LDSCRIPT = STM32F103x8_stm32duino_bootloader
-BOARD = STM32_F103_STM32DUINO
-STM32_BOOTLOADER_ADDRESS = 0x80000000
-
-DFU_ARGS = -d 1eaf:0003 -a2 -R
-DFU_SUFFIX_ARGS = -v 1eaf -p 0003
+# Bootloader selection
+BOOTLOADER = stm32duino
 
 # Enter lower-power sleep mode when on the ChibiOS idle thread
 OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE

keyboards/helix/helix.h

@@ -8,6 +8,12 @@
 #ifdef KEYBOARD_helix_rev2
     #include "rev2.h"
 #endif
+#ifdef KEYBOARD_helix_rev3_5rows
+    #include "rev3_5rows.h"
+#endif
+#ifdef KEYBOARD_helix_rev3_4rows
+    #include "rev3_4rows.h"
+#endif
 #ifdef KEYBOARD_helix_pico
     #include "pico.h"
 #endif

keyboards/helix/readme.md

@@ -5,9 +5,9 @@ Helix
 
 A compact split ortholinear keyboard.
 
-Keyboard Maintainer: [Makoto Kurauchi](https://github.com/MakotoKurauchi/) [@pluis9](https://twitter.com/pluis9)  
-Hardware Supported: Helix PCB Alpha, Beta, Pro Micro  
-Hardware Availability: [PCB & Case Data](https://github.com/MakotoKurauchi/helix), [Yushakobo Shop](https://yushakobo.jp/shop/), [Little Keyboards](https://littlekeyboards.com/collections/helix) 
+Keyboard Maintainer: [Makoto Kurauchi](https://github.com/MakotoKurauchi/) [@pluis9](https://twitter.com/pluis9) [yushakobo](https://github.com/yushakobo)
+Hardware Supported: Helix PCB Alpha, Beta, Rev3, Pro Micro  
+Hardware Availability: [PCB & Case Data](https://github.com/MakotoKurauchi/helix), [Yushakobo Shop](https://yushakobo.jp/shop/), [Little Keyboards](https://littlekeyboards.com/collections/helix)
 
 ## How to build
  * [Helix how to Customize and Compile](rev2/keymaps/default/readme.md#customize)

keyboards/helix/rev3_4rows/config.h

@@ -0,0 +1,245 @@
+/*
+Copyright 2020 yushakobo
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+#include "config_common.h"
+#include <stdio.h>
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID 0x3265 //yushakobo
+#define PRODUCT_ID 0x0004 //Helix rev3 4rows
+#define DEVICE_VER 0x0001
+#define MANUFACTURER yushakobo
+#define PRODUCT Helix rev3 4rows
+
+/* key matrix size */
+#define MATRIX_ROWS 8
+#define MATRIX_COLS 7
+
+/*
+ * Keyboard Matrix Assignments
+ *
+ * Change this to how you wired your keyboard
+ * COLS: AVR pins used for columns, left to right
+ * ROWS: AVR pins used for rows, top to bottom
+ * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
+ *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
+ *
+ */
+#define MATRIX_ROW_PINS { D4, C6, D7, E6 }
+#define MATRIX_COL_PINS { F4, F5, F6, F7, B1, B3, B2 }
+#define UNUSED_PINS
+
+/* COL2ROW, ROW2COL*/
+#define DIODE_DIRECTION COL2ROW
+
+/* Split hand configration */
+#define SPLIT_HAND_MATRIX_GRID D7,B2
+
+/* Dip switch on matrix grid */
+#define DIP_SWITCH_MATRIX_GRID { {0,6}, {1,6}, {5,6}, {6,6} }
+
+/*
+ * Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN.
+ */
+#define SOFT_SERIAL_PIN D2  // or D1, D2, D3, E6
+
+#define RGB_DI_PIN D3
+#define RGBLED_NUM 50 // Number of LEDs
+
+#ifdef RGB_MATRIX_ENABLE
+  #define DRIVER_LED_TOTAL RGBLED_NUM
+#   define RGB_MATRIX_KEYPRESSES // reacts to keypresses
+// #   define RGB_MATRIX_KEYRELEASES // reacts to keyreleases (instead of keypresses)
+// #   define RGB_DISABLE_AFTER_TIMEOUT 0 // number of ticks to wait until disabling effects
+#   define RGB_DISABLE_WHEN_USB_SUSPENDED true // turn off effects when suspended
+#   define RGB_MATRIX_FRAMEBUFFER_EFFECTS
+// #   define RGB_MATRIX_LED_PROCESS_LIMIT (DRIVER_LED_TOTAL + 4) / 5 // limits the number of LEDs to process in an animation per task run (increases keyboard responsiveness)
+// #   define RGB_MATRIX_LED_FLUSH_LIMIT 16 // limits in milliseconds how frequently an animation will update the LEDs. 16 (16ms) is equivalent to limiting to 60fps (increases keyboard responsiveness)
+#    define RGB_MATRIX_MAXIMUM_BRIGHTNESS 150 // limits maximum brightness of LEDs to 150 out of 255. Higher may cause the controller to crash.
+#    define RGB_MATRIX_HUE_STEP 8
+#    define RGB_MATRIX_SAT_STEP 8
+#    define RGB_MATRIX_VAL_STEP 8
+#    define RGB_MATRIX_SPD_STEP 10
+#endif
+
+#ifdef RGBLIGHT_ENABLE
+  #define RGBLIGHT_SPLIT
+  #define RGBLED_SPLIT { 25, 25 }
+//   #define RGBLIGHT_HUE_STEP 8
+//   #define RGBLIGHT_SAT_STEP 8
+//   #define RGBLIGHT_VAL_STEP 8
+   #define RGBLIGHT_LIMIT_VAL 120 /* The maximum brightness level */
+//   #define RGBLIGHT_SLEEP  /* If defined, the RGB lighting will be switched off when the host goes to sleep */
+// /*== all animations enable ==*/
+//   #define RGBLIGHT_ANIMATIONS
+// /*== or choose animations ==*/
+//   #define RGBLIGHT_EFFECT_BREATHING
+   #define RGBLIGHT_EFFECT_RAINBOW_MOOD
+   #define RGBLIGHT_EFFECT_RAINBOW_SWIRL
+//   #define RGBLIGHT_EFFECT_SNAKE
+//   #define RGBLIGHT_EFFECT_KNIGHT
+//   #define RGBLIGHT_EFFECT_CHRISTMAS
+   #define RGBLIGHT_EFFECT_STATIC_GRADIENT
+   #define RGBLIGHT_EFFECT_RGB_TEST
+//   #define RGBLIGHT_EFFECT_ALTERNATING
+#endif
+
+/* Custom font */
+#define OLED_FONT_H "keyboards/helix/common/glcdfont.c"
+
+/* Encorder */
+#define ENCODERS_PAD_A { B6 }
+#define ENCODERS_PAD_B { B5 }
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCE 5
+
+/* define if matrix has ghost (lacks anti-ghosting diodes) */
+//#define MATRIX_HAS_GHOST
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
+ * This is userful for the Windows task manager shortcut (ctrl+shift+esc).
+ */
+// #define GRAVE_ESC_CTRL_OVERRIDE
+
+/*
+ * Force NKRO
+ *
+ * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
+ * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
+ * makefile for this to work.)
+ *
+ * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
+ * until the next keyboard reset.
+ *
+ * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
+ * fully operational during normal computer usage.
+ *
+ * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
+ * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
+ * bootmagic, NKRO mode will always be enabled until it is toggled again during a
+ * power-up.
+ *
+ */
+//#define FORCE_NKRO
+
+/*
+ * Magic Key Options
+ *
+ * Magic keys are hotkey commands that allow control over firmware functions of
+ * the keyboard. They are best used in combination with the HID Listen program,
+ * found here: https://www.pjrc.com/teensy/hid_listen.html
+ *
+ * The options below allow the magic key functionality to be changed. This is
+ * useful if your keyboard/keypad is missing keys and you want magic key support.
+ *
+ */
+
+/* key combination for magic key command */
+/* defined by default; to change, uncomment and set to the combination you want */
+// #define IS_COMMAND() (get_mods() == MOD_MASK_SHIFT)
+
+/* control how magic key switches layers */
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS  true
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS  true
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false
+
+/* override magic key keymap */
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM
+//#define MAGIC_KEY_HELP           H
+//#define MAGIC_KEY_HELP_ALT       SLASH
+//#define MAGIC_KEY_DEBUG          D
+//#define MAGIC_KEY_DEBUG_MATRIX   X
+//#define MAGIC_KEY_DEBUG_KBD      K
+//#define MAGIC_KEY_DEBUG_MOUSE    M
+//#define MAGIC_KEY_VERSION        V
+//#define MAGIC_KEY_STATUS         S
+//#define MAGIC_KEY_CONSOLE        C
+//#define MAGIC_KEY_LAYER0         0
+//#define MAGIC_KEY_LAYER0_ALT     GRAVE
+//#define MAGIC_KEY_LAYER1         1
+//#define MAGIC_KEY_LAYER2         2
+//#define MAGIC_KEY_LAYER3         3
+//#define MAGIC_KEY_LAYER4         4
+//#define MAGIC_KEY_LAYER5         5
+//#define MAGIC_KEY_LAYER6         6
+//#define MAGIC_KEY_LAYER7         7
+//#define MAGIC_KEY_LAYER8         8
+//#define MAGIC_KEY_LAYER9         9
+//#define MAGIC_KEY_BOOTLOADER     B
+//#define MAGIC_KEY_BOOTLOADER_ALT ESC
+//#define MAGIC_KEY_LOCK           CAPS
+//#define MAGIC_KEY_EEPROM         E
+//#define MAGIC_KEY_EEPROM_CLEAR   BSPACE
+//#define MAGIC_KEY_NKRO           N
+//#define MAGIC_KEY_SLEEP_LED      Z
+
+/*
+ * Feature disable options
+ *  These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+//#define NO_DEBUG
+
+/* disable print */
+//#define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+
+/* disable these deprecated features by default */
+#define NO_ACTION_MACRO
+#define NO_ACTION_FUNCTION
+
+/*
+ * MIDI options
+ */
+
+/* Prevent use of disabled MIDI features in the keymap */
+//#define MIDI_ENABLE_STRICT 1
+
+/* enable basic MIDI features:
+   - MIDI notes can be sent when in Music mode is on
+*/
+//#define MIDI_BASIC
+
+/* enable advanced MIDI features:
+   - MIDI notes can be added to the keymap
+   - Octave shift and transpose
+   - Virtual sustain, portamento, and modulation wheel
+   - etc.
+*/
+//#define MIDI_ADVANCED
+
+/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
+//#define MIDI_TONE_KEYCODE_OCTAVES 1
+
+/* Bootmagic Lite key configuration */
+// #define BOOTMAGIC_LITE_ROW 0
+// #define BOOTMAGIC_LITE_COLUMN 0

keyboards/helix/rev3_4rows/info.json

@@ -0,0 +1,17 @@
+{
+  "keyboard_name": "Helix rev3 4rows",
+  "url": "",
+  "maintainer": "yushakobo",
+  "width": 15,
+  "height": 4,
+  "layouts": {
+    "LAYOUT": {
+      "layout": [
+        {"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":4, "y":0}, {"x":5, "y":0},                                 {"x":9, "y":0}, {"x":10, "y":0}, {"x":11, "y":0}, {"x":12, "y":0}, {"x":13, "y":0}, {"x":14, "y":0},
+        {"x":0, "y":1}, {"x":1, "y":1}, {"x":2, "y":1}, {"x":3, "y":1}, {"x":4, "y":1}, {"x":5, "y":1},                                 {"x":9, "y":1}, {"x":10, "y":1}, {"x":11, "y":1}, {"x":12, "y":1}, {"x":13, "y":1}, {"x":14, "y":1},
+        {"x":0, "y":2}, {"x":1, "y":2}, {"x":2, "y":2}, {"x":3, "y":2}, {"x":4, "y":2}, {"x":5, "y":2},                                 {"x":9, "y":2}, {"x":10, "y":2}, {"x":11, "y":2}, {"x":12, "y":2}, {"x":13, "y":2}, {"x":14, "y":2},
+        {"x":0, "y":3}, {"x":1, "y":3}, {"x":2, "y":3}, {"x":3, "y":3}, {"x":4, "y":3}, {"x":5, "y":3}, {"x":6, "y":3}, {"x":8, "y":3}, {"x":9, "y":3}, {"x":10, "y":3}, {"x":11, "y":3}, {"x":12, "y":3}, {"x":13, "y":3}, {"x":14, "y":3}
+      ]
+    }
+  }
+}

keyboards/helix/rev3_4rows/keymaps/default/config.h

@@ -0,0 +1,19 @@
+/* Copyright 2020 yushakobo
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+// place overrides here

keyboards/helix/rev3_4rows/keymaps/default/keymap.c

@@ -0,0 +1,193 @@
+/* Copyright 2020 yushakobo
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+
+
+// Defines names for use in layer keycodes and the keymap
+enum layer_names {
+  _QWERTY = 0,
+  _LOWER,
+  _RAISE,
+  _ADJUST
+};
+
+// Defines the keycodes used by our macros in process_record_user
+enum custom_keycodes {
+  EISU = SAFE_RANGE,
+  KANA,
+  ADJUST,
+  RGBRST
+};
+
+#define LOWER MO(_LOWER)
+#define RAISE MO(_RAISE)
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+  /* Qwerty
+   * ,-----------------------------------------.             ,-----------------------------------------.
+   * | Tab  |   Q  |   W  |   E  |   R  |   T  |             |   Y  |   U  |   I  |   O  |   P  | Bksp |
+   * |------+------+------+------+------+------|             |------+------+------+------+------+------|
+   * | Ctrl |   A  |   S  |   D  |   F  |   G  |             |   H  |   J  |   K  |   L  |   ;  |  '   |
+   * |------+------+------+------+------+------|             |------+------+------+------+------+------|
+   * | Shift|   Z  |   X  |   C  |   V  |   B  |             |   N  |   M  |   ,  |   .  |   /  |Enter |
+   * |------+------+------+------+------+------+-------------+------+------+------+------+------+------|
+   * |Adjust| Esc  | Alt  | GUI  | EISU |Lower |Space |Space |Raise | KANA | Left | Down |  Up  |Right |
+   * `-------------------------------------------------------------------------------------------------'
+   */
+  [_QWERTY] = LAYOUT( \
+      KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,                      KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_BSPC, \
+      KC_LCTL, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,                      KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT, \
+      KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,                      KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_ENT , \
+      ADJUST,  KC_ESC,  KC_LALT, KC_LGUI, EISU,    LOWER,   KC_SPC,  KC_SPC,  RAISE,   KANA,    KC_LEFT, KC_DOWN, KC_UP,   KC_RGHT \
+      ),
+
+  /* Lower
+   * ,-----------------------------------------.             ,-----------------------------------------.
+   * |   ~  |   !  |   @  |   #  |   $  |   %  |             |   ^  |   &  |   *  |   (  |   )  |      |
+   * |------+------+------+------+------+------|             |------+------+------+------+------+------|
+   * |      |  F1  |  F2  |  F3  |  F4  |  F5  |             |  F6  |   _  |   +  |   {  |   }  |  |   |
+   * |------+------+------+------+------+------|             |------+------+------+------+------+------|
+   * | CAPS |  F7  |  F8  |  F9  |  F10 |  F11 |             |  F12 |      |      | Home | End  |      |
+   * |------+------+------+------+------+------+-------------+------+------+------+------+------+------|
+   * |      |      |      |      |      |      |      |      |      |      | Next | Vol- | Vol+ | Play |
+   * `-------------------------------------------------------------------------------------------------'
+   */
+  [_LOWER] = LAYOUT( \
+      KC_TILD, KC_EXLM, KC_AT,   KC_HASH, KC_DLR,  KC_PERC,                   KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, _______, \
+      _______, KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,                     KC_F6,   KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, KC_PIPE, \
+      KC_CAPS, KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,                    KC_F12,  _______, _______, KC_HOME, KC_END,  _______, \
+      _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY \
+      ),
+
+  /* Raise
+   * ,-----------------------------------------.             ,-----------------------------------------.
+   * |   `  |   1  |   2  |   3  |   4  |   5  |             |   6  |   7  |   8  |   9  |   0  | Del  |
+   * |------+------+------+------+------+------|             |------+------+------+------+------+------|
+   * |      |  F1  |  F2  |  F3  |  F4  |  F5  |             |  F6  |   -  |   =  |   [  |   ]  |  \   |
+   * |------+------+------+------+------+------|             |------+------+------+------+------+------|
+   * | CAPS |  F7  |  F8  |  F9  |  F10 |  F11 |             |  F12 |      |      |PageDn|PageUp|      |
+   * |------+------+------+------+------+------+-------------+------+------+------+------+------+------|
+   * |      |      |      |      |      |      |      |      |      |      | Next | Vol- | Vol+ | Play |
+   * `-------------------------------------------------------------------------------------------------'
+   */
+  [_RAISE] = LAYOUT( \
+      KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,                      KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_DEL, \
+      _______, KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,                     KC_F6,   KC_MINS, KC_EQL,  KC_LBRC, KC_RBRC, KC_BSLS, \
+      KC_CAPS, KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,                    KC_F12,  _______, _______, KC_PGDN, KC_PGUP, _______, \
+      _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY \
+      ),
+
+  /* Adjust (Lower + Raise)
+   * ,-----------------------------------------.             ,-----------------------------------------.
+   * |  F1  |  F2  |  F3  |  F4  |  F5  |  F6  |             |  F7  |  F8  |  F9  |  F10 |  F11 |  F12 |
+   * |------+------+------+------+------+------|             |------+------+------+------+------+------|
+   * |      | Reset|RGBRST|EEPRST|      |      |             |      |      |      |      |      |  Del |
+   * |------+------+------+------+------+------|             |------+------+------+------+------+------|
+   * |      |      |      |      |      | Mac  |             | Win  |      |RGB ON| HUE+ | SAT+ | VAL+ |
+   * |------+------+------+------+------+------+------+------+------+------+------+------+------+------|
+   * |      |      |      |      |      |      |      |      |      |      | MODE | HUE- | SAT- | VAL- |
+   * `-------------------------------------------------------------------------------------------------'
+   */
+  [_ADJUST] =  LAYOUT( \
+      KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,                     KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12, \
+      _______, RESET,   RGBRST,  EEP_RST, _______, _______,                   _______, _______, _______, _______, _______, KC_DEL, \
+      _______, _______, _______, _______, _______, AG_NORM,                   AG_SWAP, _______, RGB_TOG, RGB_HUI, RGB_SAI, RGB_VAI, \
+      _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, RGB_MOD, RGB_HUD, RGB_SAD, RGB_VAD \
+      )
+
+};
+
+void encoder_update_user(uint8_t index, bool clockwise) {
+    if (index == 0) { /* Left side encoder */
+        if (clockwise) {
+            tap_code(KC_PGDN);
+        } else {
+            tap_code(KC_PGUP);
+        }
+    } else if (index == 1) { /* Right side encoder */
+        if (clockwise) {
+            tap_code(KC_DOWN);
+        } else {
+            tap_code(KC_UP);
+        }
+    }
+}
+
+layer_state_t layer_state_set_user(layer_state_t state) {
+  return update_tri_layer_state(state, _LOWER, _RAISE, _ADJUST);
+}
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+  switch (keycode) {
+    case EISU:
+      if (record->event.pressed) {
+        if (is_mac_mode()) {
+          register_code(KC_LANG2);
+        }else{
+          tap_code16(LALT(KC_GRAVE));
+        }
+      } else {
+        unregister_code(KC_LANG2);
+      }
+      return false;
+      break;
+    case KANA:
+      if (record->event.pressed) {
+        if (is_mac_mode()) {
+          register_code(KC_LANG1);
+        }else{
+          tap_code16(LALT(KC_GRAVE));
+        }
+      } else {
+        unregister_code(KC_LANG1);
+      }
+      return false;
+      break;
+    case ADJUST:
+      if (record->event.pressed) {
+        layer_on(_LOWER);
+        layer_on(_RAISE);
+      } else {
+        layer_off(_LOWER);
+        layer_off(_RAISE);
+      }
+      break;
+    case RGBRST:
+      #ifdef RGBLIGHT_ENABLE
+        if (record->event.pressed) {
+          eeconfig_update_rgblight_default();
+          rgblight_enable();
+        }
+      #endif
+      break;
+  }
+  return true;
+}
+
+/*
+void matrix_init_user(void) {
+
+}
+
+void matrix_scan_user(void) {
+
+}
+
+bool led_update_user(led_t led_state) {
+    return true;
+}
+*/

keyboards/helix/rev3_4rows/keymaps/default/readme.md

@@ -0,0 +1,66 @@
+# The default keymap for Helix rev3 4rows
+
+### Qwerty Layer (Base)
+```
+,-----------------------------------------.             ,-----------------------------------------.
+| Tab  |   Q  |   W  |   E  |   R  |   T  |             |   Y  |   U  |   I  |   O  |   P  | Bksp |
+|------+------+------+------+------+------|             |------+------+------+------+------+------|
+| Ctrl |   A  |   S  |   D  |   F  |   G  |             |   H  |   J  |   K  |   L  |   ;  |  '   |
+|------+------+------+------+------+------|             |------+------+------+------+------+------|
+| Shift|   Z  |   X  |   C  |   V  |   B  |             |   N  |   M  |   ,  |   .  |   /  |Enter |
+|------+------+------+------+------+------+-------------+------+------+------+------+------+------|
+|Adjust| Esc  | Alt  | GUI  | EISU |Lower |Space |Space |Raise | KANA | Left | Down |  Up  |Right |
+`-------------------------------------------------------------------------------------------------'
+```
+### Lower Layer
+```
+,-----------------------------------------.             ,-----------------------------------------.
+|   ~  |   !  |   @  |   #  |   $  |   %  |             |   ^  |   &  |   *  |   (  |   )  |      |
+|------+------+------+------+------+------|             |------+------+------+------+------+------|
+|      |  F1  |  F2  |  F3  |  F4  |  F5  |             |  F6  |   _  |   +  |   {  |   }  |  |   |
+|------+------+------+------+------+------|             |------+------+------+------+------+------|
+| CAPS |  F7  |  F8  |  F9  |  F10 |  F11 |             |  F12 |      |      | Home | End  |      |
+|------+------+------+------+------+------+-------------+------+------+------+------+------+------|
+|      |      |      |      |      |      |      |      |      |      | Next | Vol- | Vol+ | Play |
+`-------------------------------------------------------------------------------------------------'
+```
+### Raise Layer
+```
+,-----------------------------------------.             ,-----------------------------------------.
+|   `  |   1  |   2  |   3  |   4  |   5  |             |   6  |   7  |   8  |   9  |   0  | Del  |
+|------+------+------+------+------+------|             |------+------+------+------+------+------|
+|      |  F1  |  F2  |  F3  |  F4  |  F5  |             |  F6  |   -  |   =  |   [  |   ]  |  \   |
+|------+------+------+------+------+------|             |------+------+------+------+------+------|
+| CAPS |  F7  |  F8  |  F9  |  F10 |  F11 |             |  F12 |      |      |PageDn|PageUp|      |
+|------+------+------+------+------+------+-------------+------+------+------+------+------+------|
+|      |      |      |      |      |      |      |      |      |      | Next | Vol- | Vol+ | Play |
+`-------------------------------------------------------------------------------------------------'
+```
+### Adjust Layer (Lower + Raise)
+```
+,-----------------------------------------.             ,-----------------------------------------.
+|  F1  |  F2  |  F3  |  F4  |  F5  |  F6  |             |  F7  |  F8  |  F9  |  F10 |  F11 |  F12 |
+|------+------+------+------+------+------|             |------+------+------+------+------+------|
+|      | Reset|RGBRST|EEPRST|      |      |             |      |      |      |      |      |  Del |
+|------+------+------+------+------+------|             |------+------+------+------+------+------|
+|      |      |      |      |      | Mac  |             | Win  |      |RGB ON| HUE+ | SAT+ | VAL+ |
+|------+------+------+------+------+------+------+------+------+------+------+------+------+------|
+|      |      |      |      |      |      |      |      |      |      | MODE | HUE- | SAT- | VAL- |
+`-------------------------------------------------------------------------------------------------'
+```
+
+### Rotary Encoder Settings
+
+|L/R|Clockwise|Counter Clockwise|
+|---|---|---|
+|Left|Page Down|Page Up|
+|Right|Down|Up|
+
+### DipSW Settings
+
+|Switch No.||
+|---|---|
+|Left 1|Toggle Win/mac|
+|Left 2|Not assigned|
+|Right 1|Not assigned|
+|Right 2|Not assigned|

keyboards/helix/rev3_4rows/keymaps/via/config.h

@@ -0,0 +1,19 @@
+/* Copyright 2020 yushakobo
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+// place overrides here

keyboards/helix/rev3_4rows/keymaps/via/keymap.c

@@ -0,0 +1,180 @@
+/* Copyright 2020 yushakobo
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+
+
+// Defines names for use in layer keycodes and the keymap
+enum layer_names {
+  _QWERTY = 0,
+  _LOWER,
+  _RAISE,
+  _ADJUST
+};
+
+// Defines the keycodes used by our macros in process_record_user
+enum custom_keycodes {
+  EISU = SAFE_RANGE,
+  KANA,
+  ADJUST,
+  RGBRST
+};
+
+#define LOWER FN_MO13
+#define RAISE FN_MO23
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+  /* Qwerty
+   * ,-----------------------------------------.             ,-----------------------------------------.
+   * | Tab  |   Q  |   W  |   E  |   R  |   T  |             |   Y  |   U  |   I  |   O  |   P  | Bksp |
+   * |------+------+------+------+------+------|             |------+------+------+------+------+------|
+   * | Ctrl |   A  |   S  |   D  |   F  |   G  |             |   H  |   J  |   K  |   L  |   ;  |  '   |
+   * |------+------+------+------+------+------|             |------+------+------+------+------+------|
+   * | Shift|   Z  |   X  |   C  |   V  |   B  |             |   N  |   M  |   ,  |   .  |   /  |Enter |
+   * |------+------+------+------+------+------+-------------+------+------+------+------+------+------|
+   * |Adjust| Esc  | Alt  | GUI  | EISU |Lower |Space |Space |Raise | KANA | Left | Down |  Up  |Right |
+   * `-------------------------------------------------------------------------------------------------'
+   */
+  [_QWERTY] = LAYOUT( \
+      KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,                      KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_BSPC, \
+      KC_LCTL, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,                      KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT, \
+      KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,                      KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_ENT , \
+      MO(_ADJUST), KC_ESC,  KC_LALT, KC_LGUI, EISU,    LOWER,   KC_SPC,  KC_SPC,  RAISE,   KANA,    KC_LEFT, KC_DOWN, KC_UP,   KC_RGHT \
+      ),
+
+  /* Lower
+   * ,-----------------------------------------.             ,-----------------------------------------.
+   * |   ~  |   !  |   @  |   #  |   $  |   %  |             |   ^  |   &  |   *  |   (  |   )  |      |
+   * |------+------+------+------+------+------|             |------+------+------+------+------+------|
+   * |      |  F1  |  F2  |  F3  |  F4  |  F5  |             |  F6  |   _  |   +  |   {  |   }  |  |   |
+   * |------+------+------+------+------+------|             |------+------+------+------+------+------|
+   * | CAPS |  F7  |  F8  |  F9  |  F10 |  F11 |             |  F12 |      |      | Home | End  |      |
+   * |------+------+------+------+------+------+-------------+------+------+------+------+------+------|
+   * |      |      |      |      |      |      |      |      |      |      | Next | Vol- | Vol+ | Play |
+   * `-------------------------------------------------------------------------------------------------'
+   */
+  [_LOWER] = LAYOUT( \
+      KC_TILD, KC_EXLM, KC_AT,   KC_HASH, KC_DLR,  KC_PERC,                   KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, _______, \
+      _______, KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,                     KC_F6,   KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, KC_PIPE, \
+      KC_CAPS, KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,                    KC_F12,  _______, _______, KC_HOME, KC_END,  _______, \
+      _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY \
+      ),
+
+  /* Raise
+   * ,-----------------------------------------.             ,-----------------------------------------.
+   * |   `  |   1  |   2  |   3  |   4  |   5  |             |   6  |   7  |   8  |   9  |   0  | Del  |
+   * |------+------+------+------+------+------|             |------+------+------+------+------+------|
+   * |      |  F1  |  F2  |  F3  |  F4  |  F5  |             |  F6  |   -  |   =  |   [  |   ]  |  \   |
+   * |------+------+------+------+------+------|             |------+------+------+------+------+------|
+   * | CAPS |  F7  |  F8  |  F9  |  F10 |  F11 |             |  F12 |      |      |PageDn|PageUp|      |
+   * |------+------+------+------+------+------+-------------+------+------+------+------+------+------|
+   * |      |      |      |      |      |      |      |      |      |      | Next | Vol- | Vol+ | Play |
+   * `-------------------------------------------------------------------------------------------------'
+   */
+  [_RAISE] = LAYOUT( \
+      KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,                      KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_DEL, \
+      _______, KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,                     KC_F6,   KC_MINS, KC_EQL,  KC_LBRC, KC_RBRC, KC_BSLS, \
+      KC_CAPS, KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,                    KC_F12,  _______, _______, KC_PGDN, KC_PGUP, _______, \
+      _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY \
+      ),
+
+  /* Adjust (Lower + Raise)
+   * ,-----------------------------------------.             ,-----------------------------------------.
+   * |  F1  |  F2  |  F3  |  F4  |  F5  |  F6  |             |  F7  |  F8  |  F9  |  F10 |  F11 |  F12 |
+   * |------+------+------+------+------+------|             |------+------+------+------+------+------|
+   * |      | Reset|RGBRST|      |      |      |             |      |      |      |      |      |  Del |
+   * |------+------+------+------+------+------|             |------+------+------+------+------+------|
+   * |      |      |      |      |      | Mac  |             | Win  |      |RGB ON| HUE+ | SAT+ | VAL+ |
+   * |------+------+------+------+------+------+------+------+------+------+------+------+------+------|
+   * |      |      |      |      |      |      |      |      |      |      | MODE | HUE- | SAT- | VAL- |
+   * `-------------------------------------------------------------------------------------------------'
+   */
+  [_ADJUST] =  LAYOUT( \
+      KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,                     KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12, \
+      _______, RESET,   RGBRST,  _______, _______, _______,                   _______, _______, _______, _______, _______, KC_DEL, \
+      _______, _______, _______, _______, _______, AG_NORM,                   AG_SWAP, _______, RGB_TOG, RGB_HUI, RGB_SAI, RGB_VAI, \
+      _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, RGB_MOD, RGB_HUD, RGB_SAD, RGB_VAD \
+      )
+
+};
+
+void encoder_update_user(uint8_t index, bool clockwise) {
+    if (index == 0) { /* Left side encoder */
+        if (clockwise) {
+            tap_code(KC_PGDN);
+        } else {
+            tap_code(KC_PGUP);
+        }
+    } else if (index == 1) { /* Right side encoder */
+        if (clockwise) {
+            tap_code(KC_DOWN);
+        } else {
+            tap_code(KC_UP);
+        }
+    }
+}
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+  switch (keycode) {
+    case EISU:
+      if (record->event.pressed) {
+        if (is_mac_mode()) {
+          register_code(KC_LANG2);
+        }else{
+          tap_code16(LALT(KC_GRAVE));
+        }
+      } else {
+        unregister_code(KC_LANG2);
+      }
+      return false;
+      break;
+    case KANA:
+      if (record->event.pressed) {
+        if (is_mac_mode()) {
+          register_code(KC_LANG1);
+        }else{
+          tap_code16(LALT(KC_GRAVE));
+        }
+      } else {
+        unregister_code(KC_LANG1);
+      }
+      return false;
+      break;
+    case RGBRST:
+      #ifdef RGBLIGHT_ENABLE
+        if (record->event.pressed) {
+          eeconfig_update_rgblight_default();
+          rgblight_enable();
+        }
+      #endif
+      break;
+  }
+  return true;
+}
+
+/*
+void matrix_init_user(void) {
+
+}
+
+void matrix_scan_user(void) {
+
+}
+
+bool led_update_user(led_t led_state) {
+    return true;
+}
+*/

keyboards/helix/rev3_4rows/keymaps/via/readme.md

@@ -0,0 +1,66 @@
+# The default VIA keymap for Helix rev3 4rows
+
+### Qwerty Layer (Base)
+```
+,-----------------------------------------.             ,-----------------------------------------.
+| Tab  |   Q  |   W  |   E  |   R  |   T  |             |   Y  |   U  |   I  |   O  |   P  | Bksp |
+|------+------+------+------+------+------|             |------+------+------+------+------+------|
+| Ctrl |   A  |   S  |   D  |   F  |   G  |             |   H  |   J  |   K  |   L  |   ;  |  '   |
+|------+------+------+------+------+------|             |------+------+------+------+------+------|
+| Shift|   Z  |   X  |   C  |   V  |   B  |             |   N  |   M  |   ,  |   .  |   /  |Enter |
+|------+------+------+------+------+------+-------------+------+------+------+------+------+------|
+|Adjust| Esc  | Alt  | GUI  | EISU |Lower |Space |Space |Raise | KANA | Left | Down |  Up  |Right |
+`-------------------------------------------------------------------------------------------------'
+```
+### Lower Layer
+```
+,-----------------------------------------.             ,-----------------------------------------.
+|   ~  |   !  |   @  |   #  |   $  |   %  |             |   ^  |   &  |   *  |   (  |   )  |      |
+|------+------+------+------+------+------|             |------+------+------+------+------+------|
+|      |  F1  |  F2  |  F3  |  F4  |  F5  |             |  F6  |   _  |   +  |   {  |   }  |  |   |
+|------+------+------+------+------+------|             |------+------+------+------+------+------|
+| CAPS |  F7  |  F8  |  F9  |  F10 |  F11 |             |  F12 |      |      | Home | End  |      |
+|------+------+------+------+------+------+-------------+------+------+------+------+------+------|
+|      |      |      |      |      |      |      |      |      |      | Next | Vol- | Vol+ | Play |
+`-------------------------------------------------------------------------------------------------'
+```
+### Raise Layer
+```
+,-----------------------------------------.             ,-----------------------------------------.
+|   `  |   1  |   2  |   3  |   4  |   5  |             |   6  |   7  |   8  |   9  |   0  | Del  |
+|------+------+------+------+------+------|             |------+------+------+------+------+------|
+|      |  F1  |  F2  |  F3  |  F4  |  F5  |             |  F6  |   -  |   =  |   [  |   ]  |  \   |
+|------+------+------+------+------+------|             |------+------+------+------+------+------|
+| CAPS |  F7  |  F8  |  F9  |  F10 |  F11 |             |  F12 |      |      |PageDn|PageUp|      |
+|------+------+------+------+------+------+-------------+------+------+------+------+------+------|
+|      |      |      |      |      |      |      |      |      |      | Next | Vol- | Vol+ | Play |
+`-------------------------------------------------------------------------------------------------'
+```
+### Adjust Layer (Lower + Raise)
+```
+,-----------------------------------------.             ,-----------------------------------------.
+|  F1  |  F2  |  F3  |  F4  |  F5  |  F6  |             |  F7  |  F8  |  F9  |  F10 |  F11 |  F12 |
+|------+------+------+------+------+------|             |------+------+------+------+------+------|
+|      | Reset|RGBRST|      |      |      |             |      |      |      |      |      |  Del |
+|------+------+------+------+------+------|             |------+------+------+------+------+------|
+|      |      |      |      |      | Mac  |             | Win  |      |RGB ON| HUE+ | SAT+ | VAL+ |
+|------+------+------+------+------+------+------+------+------+------+------+------+------+------|
+|      |      |      |      |      |      |      |      |      |      | MODE | HUE- | SAT- | VAL- |
+`-------------------------------------------------------------------------------------------------'
+```
+
+### Rotary Encoder Settings
+
+|L/R|Clockwise|Counter Clockwise|
+|---|---|---|
+|Left|Page Down|Page Up|
+|Right|Down|Up|
+
+### DipSW Settings
+
+|Switch No.||
+|---|---|
+|Left 1|Toggle Win/mac|
+|Left 2|Not assigned|
+|Right 1|Not assigned|
+|Right 2|Not assigned|

keyboards/helix/rev3_4rows/keymaps/via/rules.mk

@@ -0,0 +1 @@
+VIA_ENABLE = yes

keyboards/helix/rev3_4rows/oled_display.c

@@ -0,0 +1,123 @@
+/* Copyright 2020 yushakobo
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+/*
+   How to Customize
+
+   $ make helix/rev3_4rows:YOUR_KEYMAP:clean
+   $ cp keyboards/helix/rev3_4rows/oled_display.c keyboards/helix/rev3_4rows/keymaps/YOUR_KEYMAP
+
+   $ edit keyboards/helix/rev3_4rows/keymaps/YOUR_KEYMAP/oled_display.c
+   $ make helix/rev3_4rows:YOUR_KEYMAP
+   $ make helix/rev3_4rows:YOUR_KEYMAP:flash
+ */
+
+#include QMK_KEYBOARD_H
+
+// Defines names for use in layer keycodes and the keymap
+enum layer_names {
+  _QWERTY = 0,
+  _LOWER,
+  _RAISE,
+  _ADJUST
+};
+
+#ifdef OLED_DRIVER_ENABLE
+
+void render_status(void) {
+
+  // Render to mode icon
+  static const char os_logo[][2][3] PROGMEM  ={{{0x95,0x96,0},{0xb5,0xb6,0}},{{0x97,0x98,0},{0xb7,0xb8,0}}};
+  if (is_mac_mode()) {
+    oled_write_P(os_logo[0][0], false);
+    oled_write_P(PSTR("\n"), false);
+    oled_write_P(os_logo[0][1], false);
+  }else{
+    oled_write_P(os_logo[1][0], false);
+    oled_write_P(PSTR("\n"), false);
+    oled_write_P(os_logo[1][1], false);
+  }
+
+  oled_write_P(PSTR(" "), false);
+
+  // Host Keyboard Layer Status
+  oled_write_P(PSTR("Layer: "), false);
+
+  switch (get_highest_layer(layer_state)) {
+      case _QWERTY:
+          oled_write_P(PSTR("Default\n"), false);
+          break;
+      case _RAISE:
+          oled_write_P(PSTR("Raise\n"), false);
+          break;
+      case _LOWER:
+          oled_write_P(PSTR("Lower\n"), false);
+          break;
+      case _ADJUST:
+          oled_write_P(PSTR("Adjust\n"), false);
+          break;
+      default:
+          // Or use the write_ln shortcut over adding '\n' to the end of your string
+          oled_write_ln_P(PSTR("Undefined"), false);
+  }
+
+  oled_write_P(PSTR("\n"), false);
+
+  // Host Keyboard LED Status
+  led_t led_state = host_keyboard_led_state();
+  oled_write_P(led_state.num_lock ? PSTR("NUM ") : PSTR("    "), false);
+  oled_write_P(led_state.caps_lock ? PSTR("CAP ") : PSTR("    "), false);
+  oled_write_P(led_state.scroll_lock ? PSTR("SCR ") : PSTR("    "), false);
+}
+
+
+static void render_logo(void) {
+    static const char PROGMEM qmk_logo[] = {
+        0x80, 0x81, 0x82, 0x83, 0x84, 0x85, 0x86, 0x87, 0x88, 0x89, 0x8A, 0x8B, 0x8C, 0x8D, 0x8E, 0x8F, 0x90, 0x91, 0x92, 0x93, 0x94,
+        0xA0, 0xA1, 0xA2, 0xA3, 0xA4, 0xA5, 0xA6, 0xA7, 0xA8, 0xA9, 0xAA, 0xAB, 0xAC, 0xAD, 0xAE, 0xAF, 0xB0, 0xB1, 0xB2, 0xB3, 0xB4,
+        0xC0, 0xC1, 0xC2, 0xC3, 0xC4, 0xC5, 0xC6, 0xC7, 0xC8, 0xC9, 0xCA, 0xCB, 0xCC, 0xCD, 0xCE, 0xCF, 0xD0, 0xD1, 0xD2, 0xD3, 0xD4, 0x00
+    };
+
+    oled_write_P(qmk_logo, false);
+}
+
+static void render_rgbled_status(bool full) {
+#ifdef RGBLIGHT_ENABLE
+  char buf[30];
+  if (RGBLIGHT_MODES > 1 && rgblight_is_enabled()) {
+      if (full) {
+          snprintf(buf, sizeof(buf), " LED %2d: %d,%d,%d ",
+                   rgblight_get_mode(),
+                   rgblight_get_hue()/RGBLIGHT_HUE_STEP,
+                   rgblight_get_sat()/RGBLIGHT_SAT_STEP,
+                   rgblight_get_val()/RGBLIGHT_VAL_STEP);
+      } else {
+          snprintf(buf, sizeof(buf), "[%2d] ", rgblight_get_mode());
+      }
+      oled_write(buf, false);
+  }
+#endif
+}
+
+void oled_task_user(void) {
+  if(is_keyboard_master()){
+    render_status();
+  }else{
+    render_logo();
+    render_rgbled_status(true);
+  }
+}
+#endif

keyboards/helix/rev3_4rows/readme.md

@@ -0,0 +1,13 @@
+# Helix rev3 4rows
+
+A compact split ortholinear keyboard.
+
+* Keyboard Maintainer: [yushakobo](https://github.com/yushakobo)
+* Hardware Supported: Helix rev3 PCBs, Pro Micro
+* Hardware Availability: (Under preparation)
+
+Make example for this keyboard (after setting up your build environment):
+
+    make helix/rev3_4rows:default:flash
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

keyboards/helix/rev3_4rows/rev3_4rows.c

@@ -0,0 +1,48 @@
+/* Copyright 2020 yushakobo
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include "helix.h"
+
+bool is_mac_mode(void) {
+    return keymap_config.swap_lalt_lgui == false;
+}
+
+void set_mac_mode(bool macmode) {
+    if (macmode) {
+        /* The result is the same as pressing the AG_NORM(=MAGIC_UNSWAP_ALT_GUI) key. */
+        /* https://github.com/qmk/qmk_firmware/blob/fb4a6ad30ea7a648acd59793ed4a30c3a8d8dc32/quantum/process_keycode/process_magic.c#L123-L124 */
+        keymap_config.swap_lalt_lgui = keymap_config.swap_ralt_rgui = false;
+    } else {
+        /* The result is the same as pressing the AG_SWAP(=MAGIC_SWAP_ALT_GUI) key. */
+        /* https://github.com/qmk/qmk_firmware/blob/fb4a6ad30ea7a648acd59793ed4a30c3a8d8dc32/quantum/process_keycode/process_magic.c#L80-L81 */
+        keymap_config.swap_lalt_lgui = keymap_config.swap_ralt_rgui = true;
+    }
+}
+
+void dip_switch_update_kb(uint8_t index, bool active) {
+    switch (index) {
+    case 0:
+        if(active) { // Left no.1  Helix rev3 common
+            set_mac_mode(false);
+        } else {
+            set_mac_mode(true);
+        }
+        break;
+    default: // Left no.2 or Right no.1 or Right no.2 for user/keymap
+        dip_switch_update_user(index, active);
+        break;
+    }
+}

keyboards/helix/rev3_4rows/rev3_4rows.h

@@ -0,0 +1,47 @@
+/* Copyright 2020 yushakobo
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+#include "quantum.h"
+
+bool is_mac_mode(void);
+void set_mac_mode(bool macmode);
+
+/* This is a shortcut to help you visually see your layout.
+ *
+ * The first section contains all of the arguments representing the physical
+ * layout of the board and position of the keys.
+ *
+ * The second converts the arguments into a two-dimensional array which
+ * represents the switch matrix.
+ */
+#define LAYOUT( \
+  L00, L01, L02, L03, L04, L05,           R00, R01, R02, R03, R04, R05, \
+  L10, L11, L12, L13, L14, L15,           R10, R11, R12, R13, R14, R15, \
+  L20, L21, L22, L23, L24, L25,           R20, R21, R22, R23, R24, R25, \
+  L30, L31, L32, L33, L34, L35, L36, R36, R30, R31, R32, R33, R34, R35 \
+  ) \
+  { \
+    { L00, L01, L02, L03, L04, L05, KC_NO }, \
+    { L10, L11, L12, L13, L14, L15, KC_NO }, \
+    { L20, L21, L22, L23, L24, L25, KC_NO }, \
+    { L30, L31, L32, L33, L34, L35, L36 }, \
+    { R05, R04, R03, R02, R01, R00, KC_NO }, \
+    { R15, R14, R13, R12, R11, R10, KC_NO }, \
+    { R25, R24, R23, R22, R21, R20, KC_NO }, \
+    { R35, R34, R33, R32, R31, R30, R36 }, \
+ }

keyboards/helix/rev3_4rows/rules.mk

@@ -0,0 +1,10 @@
+EXTRAKEY_ENABLE = yes    # Audio control and System control
+RGBLIGHT_ENABLE = yes   # Enable keyboard RGB underglow
+SPLIT_KEYBOARD = yes
+#RGB_MATRIX_ENABLE = WS2812
+OLED_DRIVER_ENABLE = yes
+ENCODER_ENABLE = yes
+DIP_SWITCH_ENABLE = yes
+LTO_ENABLE = yes
+
+SRC += oled_display.c

keyboards/helix/rev3_5rows/config.h

@@ -0,0 +1,246 @@
+/*
+Copyright 2020 yushakobo
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+#include "config_common.h"
+#include <stdio.h>
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID 0x3265 //yushakobo
+#define PRODUCT_ID 0x0003 //Helix rev3 5rows
+#define DEVICE_VER 0x0001
+#define MANUFACTURER yushakobo
+#define PRODUCT Helix rev3 5rows
+
+/* key matrix size */
+#define MATRIX_ROWS 10
+#define MATRIX_COLS 7
+
+/*
+ * Keyboard Matrix Assignments
+ *
+ * Change this to how you wired your keyboard
+ * COLS: AVR pins used for columns, left to right
+ * ROWS: AVR pins used for rows, top to bottom
+ * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
+ *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
+ *
+ */
+#define MATRIX_ROW_PINS { D4, C6, D7, E6, B4 }
+#define MATRIX_COL_PINS { F4, F5, F6, F7, B1, B3, B2 }
+#define UNUSED_PINS
+
+/* COL2ROW, ROW2COL*/
+#define DIODE_DIRECTION COL2ROW
+
+/* Split hand configration */
+#define SPLIT_HAND_MATRIX_GRID D7,B2
+#define SPLIT_HAND_MATRIX_GRID_LOW_IS_RIGHT
+
+/* Dip switch on matrix grid */
+#define DIP_SWITCH_MATRIX_GRID { {0,6}, {1,6}, {5,6}, {6,6} }
+
+/*
+ * Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN.
+ */
+#define SOFT_SERIAL_PIN D2  // or D1, D2, D3, E6
+
+#define RGB_DI_PIN D3
+#define RGBLED_NUM 64 // Number of LEDs
+
+#ifdef RGB_MATRIX_ENABLE
+  #define DRIVER_LED_TOTAL RGBLED_NUM
+#   define RGB_MATRIX_KEYPRESSES // reacts to keypresses
+// #   define RGB_MATRIX_KEYRELEASES // reacts to keyreleases (instead of keypresses)
+// #   define RGB_DISABLE_AFTER_TIMEOUT 0 // number of ticks to wait until disabling effects
+#   define RGB_DISABLE_WHEN_USB_SUSPENDED true // turn off effects when suspended
+#   define RGB_MATRIX_FRAMEBUFFER_EFFECTS
+// #   define RGB_MATRIX_LED_PROCESS_LIMIT (DRIVER_LED_TOTAL + 4) / 5 // limits the number of LEDs to process in an animation per task run (increases keyboard responsiveness)
+// #   define RGB_MATRIX_LED_FLUSH_LIMIT 16 // limits in milliseconds how frequently an animation will update the LEDs. 16 (16ms) is equivalent to limiting to 60fps (increases keyboard responsiveness)
+#    define RGB_MATRIX_MAXIMUM_BRIGHTNESS 150 // limits maximum brightness of LEDs to 150 out of 255. Higher may cause the controller to crash.
+#    define RGB_MATRIX_HUE_STEP 8
+#    define RGB_MATRIX_SAT_STEP 8
+#    define RGB_MATRIX_VAL_STEP 8
+#    define RGB_MATRIX_SPD_STEP 10
+#endif
+
+#ifdef RGBLIGHT_ENABLE
+  #define RGBLIGHT_SPLIT
+  #define RGBLED_SPLIT { 32, 32 }
+//   #define RGBLIGHT_HUE_STEP 8
+//   #define RGBLIGHT_SAT_STEP 8
+//   #define RGBLIGHT_VAL_STEP 8
+   #define RGBLIGHT_LIMIT_VAL 120 /* The maximum brightness level */
+//   #define RGBLIGHT_SLEEP  /* If defined, the RGB lighting will be switched off when the host goes to sleep */
+// /*== all animations enable ==*/
+//   #define RGBLIGHT_ANIMATIONS
+// /*== or choose animations ==*/
+//   #define RGBLIGHT_EFFECT_BREATHING
+   #define RGBLIGHT_EFFECT_RAINBOW_MOOD
+   #define RGBLIGHT_EFFECT_RAINBOW_SWIRL
+//   #define RGBLIGHT_EFFECT_SNAKE
+//   #define RGBLIGHT_EFFECT_KNIGHT
+//   #define RGBLIGHT_EFFECT_CHRISTMAS
+   #define RGBLIGHT_EFFECT_STATIC_GRADIENT
+   #define RGBLIGHT_EFFECT_RGB_TEST
+//   #define RGBLIGHT_EFFECT_ALTERNATING
+#endif
+
+/* Custom font */
+#define OLED_FONT_H "keyboards/helix/common/glcdfont.c"
+
+/* Encorder */
+#define ENCODERS_PAD_A { B6 }
+#define ENCODERS_PAD_B { B5 }
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCE 5
+
+/* define if matrix has ghost (lacks anti-ghosting diodes) */
+//#define MATRIX_HAS_GHOST
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
+ * This is userful for the Windows task manager shortcut (ctrl+shift+esc).
+ */
+// #define GRAVE_ESC_CTRL_OVERRIDE
+
+/*
+ * Force NKRO
+ *
+ * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
+ * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
+ * makefile for this to work.)
+ *
+ * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
+ * until the next keyboard reset.
+ *
+ * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
+ * fully operational during normal computer usage.
+ *
+ * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
+ * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
+ * bootmagic, NKRO mode will always be enabled until it is toggled again during a
+ * power-up.
+ *
+ */
+//#define FORCE_NKRO
+
+/*
+ * Magic Key Options
+ *
+ * Magic keys are hotkey commands that allow control over firmware functions of
+ * the keyboard. They are best used in combination with the HID Listen program,
+ * found here: https://www.pjrc.com/teensy/hid_listen.html
+ *
+ * The options below allow the magic key functionality to be changed. This is
+ * useful if your keyboard/keypad is missing keys and you want magic key support.
+ *
+ */
+
+/* key combination for magic key command */
+/* defined by default; to change, uncomment and set to the combination you want */
+// #define IS_COMMAND() (get_mods() == MOD_MASK_SHIFT)
+
+/* control how magic key switches layers */
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS  true
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS  true
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false
+
+/* override magic key keymap */
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM
+//#define MAGIC_KEY_HELP           H
+//#define MAGIC_KEY_HELP_ALT       SLASH
+//#define MAGIC_KEY_DEBUG          D
+//#define MAGIC_KEY_DEBUG_MATRIX   X
+//#define MAGIC_KEY_DEBUG_KBD      K
+//#define MAGIC_KEY_DEBUG_MOUSE    M
+//#define MAGIC_KEY_VERSION        V
+//#define MAGIC_KEY_STATUS         S
+//#define MAGIC_KEY_CONSOLE        C
+//#define MAGIC_KEY_LAYER0         0
+//#define MAGIC_KEY_LAYER0_ALT     GRAVE
+//#define MAGIC_KEY_LAYER1         1
+//#define MAGIC_KEY_LAYER2         2
+//#define MAGIC_KEY_LAYER3         3
+//#define MAGIC_KEY_LAYER4         4
+//#define MAGIC_KEY_LAYER5         5
+//#define MAGIC_KEY_LAYER6         6
+//#define MAGIC_KEY_LAYER7         7
+//#define MAGIC_KEY_LAYER8         8
+//#define MAGIC_KEY_LAYER9         9
+//#define MAGIC_KEY_BOOTLOADER     B
+//#define MAGIC_KEY_BOOTLOADER_ALT ESC
+//#define MAGIC_KEY_LOCK           CAPS
+//#define MAGIC_KEY_EEPROM         E
+//#define MAGIC_KEY_EEPROM_CLEAR   BSPACE
+//#define MAGIC_KEY_NKRO           N
+//#define MAGIC_KEY_SLEEP_LED      Z
+
+/*
+ * Feature disable options
+ *  These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+//#define NO_DEBUG
+
+/* disable print */
+//#define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+
+/* disable these deprecated features by default */
+#define NO_ACTION_MACRO
+#define NO_ACTION_FUNCTION
+
+/*
+ * MIDI options
+ */
+
+/* Prevent use of disabled MIDI features in the keymap */
+//#define MIDI_ENABLE_STRICT 1
+
+/* enable basic MIDI features:
+   - MIDI notes can be sent when in Music mode is on
+*/
+//#define MIDI_BASIC
+
+/* enable advanced MIDI features:
+   - MIDI notes can be added to the keymap
+   - Octave shift and transpose
+   - Virtual sustain, portamento, and modulation wheel
+   - etc.
+*/
+//#define MIDI_ADVANCED
+
+/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
+//#define MIDI_TONE_KEYCODE_OCTAVES 1
+
+/* Bootmagic Lite key configuration */
+// #define BOOTMAGIC_LITE_ROW 0
+// #define BOOTMAGIC_LITE_COLUMN 0

keyboards/helix/rev3_5rows/info.json

@@ -0,0 +1,18 @@
+{
+  "keyboard_name": "Helix rev3 5rows",
+  "url": "",
+  "maintainer": "yushakobo",
+  "width": 15,
+  "height": 5,
+  "layouts": {
+    "LAYOUT": {
+      "layout": [
+        {"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":4, "y":0}, {"x":5, "y":0},                                 {"x":9, "y":0}, {"x":10, "y":0}, {"x":11, "y":0}, {"x":12, "y":0}, {"x":13, "y":0}, {"x":14, "y":0},
+        {"x":0, "y":1}, {"x":1, "y":1}, {"x":2, "y":1}, {"x":3, "y":1}, {"x":4, "y":1}, {"x":5, "y":1},                                 {"x":9, "y":1}, {"x":10, "y":1}, {"x":11, "y":1}, {"x":12, "y":1}, {"x":13, "y":1}, {"x":14, "y":1},
+        {"x":0, "y":2}, {"x":1, "y":2}, {"x":2, "y":2}, {"x":3, "y":2}, {"x":4, "y":2}, {"x":5, "y":2},                                 {"x":9, "y":2}, {"x":10, "y":2}, {"x":11, "y":2}, {"x":12, "y":2}, {"x":13, "y":2}, {"x":14, "y":2},
+        {"x":0, "y":3}, {"x":1, "y":3}, {"x":2, "y":3}, {"x":3, "y":3}, {"x":4, "y":3}, {"x":5, "y":3}, {"x":6, "y":3}, {"x":8, "y":3}, {"x":9, "y":3}, {"x":10, "y":3}, {"x":11, "y":3}, {"x":12, "y":3}, {"x":13, "y":3}, {"x":14, "y":3},
+        {"x":0, "y":4}, {"x":1, "y":4}, {"x":2, "y":4}, {"x":3, "y":4}, {"x":4, "y":4}, {"x":5, "y":4}, {"x":6, "y":4}, {"x":8, "y":4}, {"x":9, "y":4}, {"x":10, "y":4}, {"x":11, "y":4}, {"x":12, "y":4}, {"x":13, "y":4}, {"x":14, "y":4}
+      ]
+    }
+  }
+}

keyboards/helix/rev3_5rows/keymaps/default/config.h

@@ -0,0 +1,19 @@
+/* Copyright 2020 yushakobo
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+// place overrides here

keyboards/helix/rev3_5rows/keymaps/default/keymap.c

@@ -0,0 +1,203 @@
+/* Copyright 2020 yushakobo
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+
+
+// Defines names for use in layer keycodes and the keymap
+enum layer_names {
+  _QWERTY = 0,
+  _LOWER,
+  _RAISE,
+  _ADJUST
+};
+
+// Defines the keycodes used by our macros in process_record_user
+enum custom_keycodes {
+  EISU = SAFE_RANGE,
+  KANA,
+  ADJUST,
+  RGBRST
+};
+
+#define LOWER MO(_LOWER)
+#define RAISE MO(_RAISE)
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+  /* Qwerty
+   * ,-----------------------------------------.             ,-----------------------------------------.
+   * |   `  |   1  |   2  |   3  |   4  |   5  |             |   6  |   7  |   8  |   9  |   0  | Del  |
+   * |------+------+------+------+------+------|             |------+------+------+------+------+------|
+   * | Tab  |   Q  |   W  |   E  |   R  |   T  |             |   Y  |   U  |   I  |   O  |   P  | Bksp |
+   * |------+------+------+------+------+------|             |------+------+------+------+------+------|
+   * | Ctrl |   A  |   S  |   D  |   F  |   G  |             |   H  |   J  |   K  |   L  |   ;  |  '   |
+   * |------+------+------+------+------+------+------+------+------+------+------+------+------+------|
+   * | Shift|   Z  |   X  |   C  |   V  |   B  |   [  |   ]  |   N  |   M  |   ,  |   .  |   /  |Enter |
+   * |------+------+------+------+------+------+------+------+------+------+------+------+------+------|
+   * |Adjust| Esc  | Alt  | GUI  | EISU |Lower |Space |Space |Raise | KANA | Left | Down |  Up  |Right |
+   * `-------------------------------------------------------------------------------------------------'
+   */
+  [_QWERTY] = LAYOUT( \
+      KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,                      KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_DEL, \
+      KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,                      KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_BSPC, \
+      KC_LCTL, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,                      KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT, \
+      KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_LBRC, KC_RBRC, KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_ENT , \
+      ADJUST,  KC_ESC,  KC_LALT, KC_LGUI, EISU,    LOWER,   KC_SPC,  KC_SPC,  RAISE,   KANA,    KC_LEFT, KC_DOWN, KC_UP,   KC_RGHT \
+    ),
+  /* Lower
+   * ,-----------------------------------------.             ,-----------------------------------------.
+   * |      |      |      |      |      |      |             |      |      |      |      |      |      |
+   * |------+------+------+------+------+------|             |------+------+------+------+------+------|
+   * |   ~  |   !  |   @  |   #  |   $  |   %  |             |   ^  |   &  |   *  |   (  |   )  |      |
+   * |------+------+------+------+------+------|             |------+------+------+------+------+------|
+   * |      |  F1  |  F2  |  F3  |  F4  |  F5  |             |  F6  |   _  |   +  |   {  |   }  |  |   |
+   * |------+------+------+------+------+------+------+------+------+------+------+------+------+------|
+   * | CAPS |  F7  |  F8  |  F9  |  F10 |  F11 |  (   |   )  |  F12 |      |      | Home | End  |      |
+   * |------+------+------+------+------+------+------+------+------+------+------+------+------+------|
+   * |      |      |      |      |      |      |      |      |      |      | Next | Vol- | Vol+ | Play |
+   * `-------------------------------------------------------------------------------------------------'
+   */
+  [_LOWER] = LAYOUT( \
+      _______, _______, _______, _______, _______, _______,                   _______, _______, _______, _______, _______, _______, \
+      KC_TILD, KC_EXLM, KC_AT,   KC_HASH, KC_DLR,  KC_PERC,                   KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, _______, \
+      _______, KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,                     KC_F6,   KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, KC_PIPE, \
+      KC_CAPS, KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_LPRN, KC_RPRN, KC_F12,  _______, _______, KC_HOME, KC_END,  _______, \
+      _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY \
+      ),
+
+  /* Raise
+   * ,-----------------------------------------.             ,-----------------------------------------.
+   * |      |      |      |      |      |      |             |      |      |      |      |      | Bksp |
+   * |------+------+------+------+------+------|             |------+------+------+------+------+------|
+   * |   `  |   1  |   2  |   3  |   4  |   5  |             |   6  |   7  |   8  |   9  |   0  | Del  |
+   * |------+------+------+------+------+------|             |------+------+------+------+------+------|
+   * |      |  F1  |  F2  |  F3  |  F4  |  F5  |             |  F6  |   -  |   =  |   [  |   ]  |  \   |
+   * |------+------+------+------+------+------+------+------+------+------+------+------+------+------|
+   * | CAPS |  F7  |  F8  |  F9  |  F10 |  F11 |      |      |  F12 |      |      |PageDn|PageUp|      |
+   * |------+------+------+------+------+------+------+------+------+------+------+------+------+------|
+   * |      |      |      |      |      |      |      |      |      |      | Next | Vol- | Vol+ | Play |
+   * `-------------------------------------------------------------------------------------------------'
+   */
+  [_RAISE] = LAYOUT( \
+      _______, _______, _______, _______, _______, _______,                   _______, _______, _______, _______, _______, KC_BSPC, \
+      KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,                      KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_DEL, \
+      _______, KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,                     KC_F6,   KC_MINS, KC_EQL,  KC_LBRC, KC_RBRC, KC_BSLS, \
+      KC_CAPS, KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  _______, _______, KC_F12,  _______, _______, KC_PGDN, KC_PGUP, _______, \
+      _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY \
+      ),
+
+  /* Adjust (Lower + Raise)
+   * ,-----------------------------------------.             ,-----------------------------------------.
+   * |  F1  |  F2  |  F3  |  F4  |  F5  |  F6  |             |  F7  |  F8  |  F9  |  F10 |  F11 |  F12 |
+   * |------+------+------+------+------+------|             |------+------+------+------+------+------|
+   * |      | Reset|RGBRST|EEPRST|      |      |             |      |      |      |      |      |  Del |
+   * |------+------+------+------+------+------|             |------+------+------+------+------+------|
+   * |      |      |      |      |      | Mac  |             | Win  |      |      |      |      |      |
+   * |------+------+------+------+------+------+------+------+------+------+------+------+------+------|
+   * |      |      |      |      |      |      |      |      |      |      |RGB ON| HUE+ | SAT+ | VAL+ |
+   * |------+------+------+------+------+------+------+------+------+------+------+------+------+------|
+   * |      |      |      |      |      |      |      |      |      |      | MODE | HUE- | SAT- | VAL- |
+   * `-------------------------------------------------------------------------------------------------'
+   */
+  [_ADJUST] =  LAYOUT( \
+      KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,                     KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12, \
+      _______, RESET,   RGBRST,  EEP_RST, _______, _______,                   _______, _______, _______, _______, _______, KC_DEL, \
+      _______, _______, _______, _______, _______, AG_NORM,                   AG_SWAP, _______, _______, _______, _______, _______, \
+      _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, RGB_TOG, RGB_HUI, RGB_SAI, RGB_VAI, \
+      _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, RGB_MOD, RGB_HUD, RGB_SAD, RGB_VAD \
+      )
+
+};
+
+void encoder_update_user(uint8_t index, bool clockwise) {
+    if (index == 0) { /* Left side encoder */
+        if (clockwise) {
+            tap_code(KC_PGDN);
+        } else {
+            tap_code(KC_PGUP);
+        }
+    } else if (index == 1) { /* Right side encoder */
+        if (clockwise) {
+            tap_code(KC_DOWN);
+        } else {
+            tap_code(KC_UP);
+        }
+    }
+}
+
+layer_state_t layer_state_set_user(layer_state_t state) {
+  return update_tri_layer_state(state, _LOWER, _RAISE, _ADJUST);
+}
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+  switch (keycode) {
+    case EISU:
+      if (record->event.pressed) {
+        if (is_mac_mode()) {
+          register_code(KC_LANG2);
+        }else{
+          tap_code16(LALT(KC_GRAVE));
+        }
+      } else {
+        unregister_code(KC_LANG2);
+      }
+      return false;
+      break;
+    case KANA:
+      if (record->event.pressed) {
+        if (is_mac_mode()) {
+          register_code(KC_LANG1);
+        }else{
+          tap_code16(LALT(KC_GRAVE));
+        }
+      } else {
+        unregister_code(KC_LANG1);
+      }
+      return false;
+      break;
+    case ADJUST:
+      if (record->event.pressed) {
+        layer_on(_LOWER);
+        layer_on(_RAISE);
+      } else {
+        layer_off(_LOWER);
+        layer_off(_RAISE);
+      }
+      break;
+    case RGBRST:
+      #ifdef RGBLIGHT_ENABLE
+        if (record->event.pressed) {
+          eeconfig_update_rgblight_default();
+          rgblight_enable();
+        }
+      #endif
+      break;
+  }
+  return true;
+}
+
+/*
+void matrix_init_user(void) {
+
+}
+
+void matrix_scan_user(void) {
+
+}
+
+bool led_update_user(led_t led_state) {
+    return true;
+}
+*/

keyboards/helix/rev3_5rows/keymaps/default/readme.md

@@ -0,0 +1,81 @@
+# The default keymap for Helix rev3 5rows
+
+### Qwerty Layer (Base)
+```
+,-----------------------------------------.             ,-----------------------------------------.
+|   `  |   1  |   2  |   3  |   4  |   5  |             |   6  |   7  |   8  |   9  |   0  | Del  |
+|------+------+------+------+------+------|             |------+------+------+------+------+------|
+| Tab  |   Q  |   W  |   E  |   R  |   T  |             |   Y  |   U  |   I  |   O  |   P  | Bksp |
+|------+------+------+------+------+------|             |------+------+------+------+------+------|
+| Ctrl |   A  |   S  |   D  |   F  |   G  |             |   H  |   J  |   K  |   L  |   ;  |  '   |
+|------+------+------+------+------+------+------+------+------+------+------+------+------+------|
+| Shift|   Z  |   X  |   C  |   V  |   B  |   [  |   ]  |   N  |   M  |   ,  |   .  |   /  |Enter |
+|------+------+------+------+------+------+------+------+------+------+------+------+------+------|
+|Adjust| Esc  | Alt  | GUI  | EISU |Lower |Space |Space |Raise | KANA | Left | Down |  Up  |Right |
+`-------------------------------------------------------------------------------------------------'
+
+```
+
+### Lower Layer
+```
+,-----------------------------------------.             ,-----------------------------------------.
+|      |      |      |      |      |      |             |      |      |      |      |      |      |
+|------+------+------+------+------+------|             |------+------+------+------+------+------|
+|   ~  |   !  |   @  |   #  |   $  |   %  |             |   ^  |   &  |   *  |   (  |   )  |      |
+|------+------+------+------+------+------|             |------+------+------+------+------+------|
+|      |  F1  |  F2  |  F3  |  F4  |  F5  |             |  F6  |   _  |   +  |   {  |   }  |  |   |
+|------+------+------+------+------+------+------+------+------+------+------+------+------+------|
+| CAPS |  F7  |  F8  |  F9  |  F10 |  F11 |  (   |   )  |  F12 |      |      | Home | End  |      |
+|------+------+------+------+------+------+------+------+------+------+------+------+------+------|
+|      |      |      |      |      |      |      |      |      |      | Next | Vol- | Vol+ | Play |
+`-------------------------------------------------------------------------------------------------'
+
+```
+
+
+### Raise Layer
+```
+,-----------------------------------------.             ,-----------------------------------------.
+|      |      |      |      |      |      |             |      |      |      |      |      | Bksp |
+|------+------+------+------+------+------|             |------+------+------+------+------+------|
+|   `  |   1  |   2  |   3  |   4  |   5  |             |   6  |   7  |   8  |   9  |   0  | Del  |
+|------+------+------+------+------+------|             |------+------+------+------+------+------|
+|      |  F1  |  F2  |  F3  |  F4  |  F5  |             |  F6  |   -  |   =  |   [  |   ]  |  \   |
+|------+------+------+------+------+------+------+------+------+------+------+------+------+------|
+| CAPS |  F7  |  F8  |  F9  |  F10 |  F11 |      |      |  F12 |      |      |PageDn|PageUp|      |
+|------+------+------+------+------+------+------+------+------+------+------+------+------+------|
+|      |      |      |      |      |      |      |      |      |      | Next | Vol- | Vol+ | Play |
+`-------------------------------------------------------------------------------------------------'
+
+```
+
+### Adjust Layer (Lower + Raise)
+```
+,-----------------------------------------.             ,-----------------------------------------.
+|  F1  |  F2  |  F3  |  F4  |  F5  |  F6  |             |  F7  |  F8  |  F9  |  F10 |  F11 |  F12 |
+|------+------+------+------+------+------|             |------+------+------+------+------+------|
+|      | Reset|RGBRST|EEPRST|      |      |             |      |      |      |      |      |  Del |
+|------+------+------+------+------+------|             |------+------+------+------+------+------|
+|      |      |      |      |      | Mac  |             | Win  |      |      |      |      |      |
+|------+------+------+------+------+------+------+------+------+------+------+------+------+------|
+|      |      |      |      |      |      |      |      |      |      |RGB ON| HUE+ | SAT+ | VAL+ |
+|------+------+------+------+------+------+------+------+------+------+------+------+------+------|
+|      |      |      |      |      |      |      |      |      |      | MODE | HUE- | SAT- | VAL- |
+`-------------------------------------------------------------------------------------------------'
+```
+
+### Rotary Encoder Settings
+
+|L/R|Clockwise|Counter Clockwise|
+|---|---|---|
+|Left|Page Down|Page Up|
+|Right|Down|Up|
+
+### DipSW Settings
+
+|Switch No.||
+|---|---|
+|Left 1|Toggle Win/mac|
+|Left 2|Not assigned|
+|Right 1|Not assigned|
+|Right 2|Not assigned|

keyboards/helix/rev3_5rows/keymaps/via/config.h

@@ -0,0 +1,19 @@
+/* Copyright 2020 yushakobo
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+// place overrides here

keyboards/helix/rev3_5rows/keymaps/via/keymap.c

@@ -0,0 +1,190 @@
+/* Copyright 2020 yushakobo
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+
+
+// Defines names for use in layer keycodes and the keymap
+enum layer_names {
+  _QWERTY = 0,
+  _LOWER,
+  _RAISE,
+  _ADJUST
+};
+
+// Defines the keycodes used by our macros in process_record_user
+enum custom_keycodes {
+  EISU = SAFE_RANGE,
+  KANA,
+  ADJUST,
+  RGBRST
+};
+
+#define LOWER FN_MO13
+#define RAISE FN_MO23
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+  /* Qwerty
+   * ,-----------------------------------------.             ,-----------------------------------------.
+   * |   `  |   1  |   2  |   3  |   4  |   5  |             |   6  |   7  |   8  |   9  |   0  | Del  |
+   * |------+------+------+------+------+------|             |------+------+------+------+------+------|
+   * | Tab  |   Q  |   W  |   E  |   R  |   T  |             |   Y  |   U  |   I  |   O  |   P  | Bksp |
+   * |------+------+------+------+------+------|             |------+------+------+------+------+------|
+   * | Ctrl |   A  |   S  |   D  |   F  |   G  |             |   H  |   J  |   K  |   L  |   ;  |  '   |
+   * |------+------+------+------+------+------+------+------+------+------+------+------+------+------|
+   * | Shift|   Z  |   X  |   C  |   V  |   B  |   [  |   ]  |   N  |   M  |   ,  |   .  |   /  |Enter |
+   * |------+------+------+------+------+------+------+------+------+------+------+------+------+------|
+   * |Adjust| Esc  | Alt  | GUI  | EISU |Lower |Space |Space |Raise | KANA | Left | Down |  Up  |Right |
+   * `-------------------------------------------------------------------------------------------------'
+   */
+  [_QWERTY] = LAYOUT( \
+      KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,                      KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_DEL, \
+      KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,                      KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_BSPC, \
+      KC_LCTL, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,                      KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT, \
+      KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_LBRC, KC_RBRC, KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_ENT , \
+      MO(_ADJUST), KC_ESC,  KC_LALT, KC_LGUI, EISU,    LOWER,   KC_SPC,  KC_SPC,  RAISE,   KANA,    KC_LEFT, KC_DOWN, KC_UP,   KC_RGHT \
+    ),
+  /* Lower
+   * ,-----------------------------------------.             ,-----------------------------------------.
+   * |      |      |      |      |      |      |             |      |      |      |      |      |      |
+   * |------+------+------+------+------+------|             |------+------+------+------+------+------|
+   * |   ~  |   !  |   @  |   #  |   $  |   %  |             |   ^  |   &  |   *  |   (  |   )  |      |
+   * |------+------+------+------+------+------|             |------+------+------+------+------+------|
+   * |      |  F1  |  F2  |  F3  |  F4  |  F5  |             |  F6  |   _  |   +  |   {  |   }  |  |   |
+   * |------+------+------+------+------+------+------+------+------+------+------+------+------+------|
+   * | CAPS |  F7  |  F8  |  F9  |  F10 |  F11 |  (   |   )  |  F12 |      |      | Home | End  |      |
+   * |------+------+------+------+------+------+------+------+------+------+------+------+------+------|
+   * |      |      |      |      |      |      |      |      |      |      | Next | Vol- | Vol+ | Play |
+   * `-------------------------------------------------------------------------------------------------'
+   */
+  [_LOWER] = LAYOUT( \
+      _______, _______, _______, _______, _______, _______,                   _______, _______, _______, _______, _______, _______, \
+      KC_TILD, KC_EXLM, KC_AT,   KC_HASH, KC_DLR,  KC_PERC,                   KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, _______, \
+      _______, KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,                     KC_F6,   KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, KC_PIPE, \
+      KC_CAPS, KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_LPRN, KC_RPRN, KC_F12,  _______, _______, KC_HOME, KC_END,  _______, \
+      _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY \
+      ),
+
+  /* Raise
+   * ,-----------------------------------------.             ,-----------------------------------------.
+   * |      |      |      |      |      |      |             |      |      |      |      |      | Bksp |
+   * |------+------+------+------+------+------|             |------+------+------+------+------+------|
+   * |   `  |   1  |   2  |   3  |   4  |   5  |             |   6  |   7  |   8  |   9  |   0  | Del  |
+   * |------+------+------+------+------+------|             |------+------+------+------+------+------|
+   * |      |  F1  |  F2  |  F3  |  F4  |  F5  |             |  F6  |   -  |   =  |   [  |   ]  |  \   |
+   * |------+------+------+------+------+------+------+------+------+------+------+------+------+------|
+   * | CAPS |  F7  |  F8  |  F9  |  F10 |  F11 |      |      |  F12 |      |      |PageDn|PageUp|      |
+   * |------+------+------+------+------+------+------+------+------+------+------+------+------+------|
+   * |      |      |      |      |      |      |      |      |      |      | Next | Vol- | Vol+ | Play |
+   * `-------------------------------------------------------------------------------------------------'
+   */
+  [_RAISE] = LAYOUT( \
+      _______, _______, _______, _______, _______, _______,                   _______, _______, _______, _______, _______, KC_BSPC, \
+      KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,                      KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_DEL, \
+      _______, KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,                     KC_F6,   KC_MINS, KC_EQL,  KC_LBRC, KC_RBRC, KC_BSLS, \
+      KC_CAPS, KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  _______, _______, KC_F12,  _______, _______, KC_PGDN, KC_PGUP, _______, \
+      _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY \
+      ),
+
+  /* Adjust (Lower + Raise)
+   * ,-----------------------------------------.             ,-----------------------------------------.
+   * |  F1  |  F2  |  F3  |  F4  |  F5  |  F6  |             |  F7  |  F8  |  F9  |  F10 |  F11 |  F12 |
+   * |------+------+------+------+------+------|             |------+------+------+------+------+------|
+   * |      | Reset|RGBRST|      |      |      |             |      |      |      |      |      |  Del |
+   * |------+------+------+------+------+------|             |------+------+------+------+------+------|
+   * |      |      |      |      |      | Mac  |             | Win  |      |      |      |      |      |
+   * |------+------+------+------+------+------+------+------+------+------+------+------+------+------|
+   * |      |      |      |      |      |      |      |      |      |      |RGB ON| HUE+ | SAT+ | VAL+ |
+   * |------+------+------+------+------+------+------+------+------+------+------+------+------+------|
+   * |      |      |      |      |      |      |      |      |      |      | MODE | HUE- | SAT- | VAL- |
+   * `-------------------------------------------------------------------------------------------------'
+   */
+  [_ADJUST] =  LAYOUT( \
+      KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,                     KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12, \
+      _______, RESET,   RGBRST,  _______, _______, _______,                   _______, _______, _______, _______, _______, KC_DEL, \
+      _______, _______, _______, _______, _______, AG_NORM,                   AG_SWAP, _______, _______, _______, _______, _______, \
+      _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, RGB_TOG, RGB_HUI, RGB_SAI, RGB_VAI, \
+      _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, RGB_MOD, RGB_HUD, RGB_SAD, RGB_VAD \
+      )
+
+};
+
+void encoder_update_user(uint8_t index, bool clockwise) {
+    if (index == 0) { /* Left side encoder */
+        if (clockwise) {
+            tap_code(KC_PGDN);
+        } else {
+            tap_code(KC_PGUP);
+        }
+    } else if (index == 1) { /* Right side encoder */
+        if (clockwise) {
+            tap_code(KC_DOWN);
+        } else {
+            tap_code(KC_UP);
+        }
+    }
+}
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+  switch (keycode) {
+    case EISU:
+      if (record->event.pressed) {
+        if (is_mac_mode()) {
+          register_code(KC_LANG2);
+        }else{
+          tap_code16(LALT(KC_GRAVE));
+        }
+      } else {
+        unregister_code(KC_LANG2);
+      }
+      return false;
+      break;
+    case KANA:
+      if (record->event.pressed) {
+        if (is_mac_mode()) {
+          register_code(KC_LANG1);
+        }else{
+          tap_code16(LALT(KC_GRAVE));
+        }
+      } else {
+        unregister_code(KC_LANG1);
+      }
+      return false;
+      break;
+    case RGBRST:
+      #ifdef RGBLIGHT_ENABLE
+        if (record->event.pressed) {
+          eeconfig_update_rgblight_default();
+          rgblight_enable();
+        }
+      #endif
+      break;
+  }
+  return true;
+}
+
+/*
+void matrix_init_user(void) {
+
+}
+
+void matrix_scan_user(void) {
+
+}
+
+bool led_update_user(led_t led_state) {
+    return true;
+}
+*/

keyboards/helix/rev3_5rows/keymaps/via/readme.md

@@ -0,0 +1,81 @@
+# The default VIA keymap for Helix rev3 5rows
+
+### Qwerty Layer (Base)
+```
+,-----------------------------------------.             ,-----------------------------------------.
+|   `  |   1  |   2  |   3  |   4  |   5  |             |   6  |   7  |   8  |   9  |   0  | Del  |
+|------+------+------+------+------+------|             |------+------+------+------+------+------|
+| Tab  |   Q  |   W  |   E  |   R  |   T  |             |   Y  |   U  |   I  |   O  |   P  | Bksp |
+|------+------+------+------+------+------|             |------+------+------+------+------+------|
+| Ctrl |   A  |   S  |   D  |   F  |   G  |             |   H  |   J  |   K  |   L  |   ;  |  '   |
+|------+------+------+------+------+------+------+------+------+------+------+------+------+------|
+| Shift|   Z  |   X  |   C  |   V  |   B  |   [  |   ]  |   N  |   M  |   ,  |   .  |   /  |Enter |
+|------+------+------+------+------+------+------+------+------+------+------+------+------+------|
+|Adjust| Esc  | Alt  | GUI  | EISU |Lower |Space |Space |Raise | KANA | Left | Down |  Up  |Right |
+`-------------------------------------------------------------------------------------------------'
+
+```
+
+### Lower Layer
+```
+,-----------------------------------------.             ,-----------------------------------------.
+|      |      |      |      |      |      |             |      |      |      |      |      |      |
+|------+------+------+------+------+------|             |------+------+------+------+------+------|
+|   ~  |   !  |   @  |   #  |   $  |   %  |             |   ^  |   &  |   *  |   (  |   )  |      |
+|------+------+------+------+------+------|             |------+------+------+------+------+------|
+|      |  F1  |  F2  |  F3  |  F4  |  F5  |             |  F6  |   _  |   +  |   {  |   }  |  |   |
+|------+------+------+------+------+------+------+------+------+------+------+------+------+------|
+| CAPS |  F7  |  F8  |  F9  |  F10 |  F11 |  (   |   )  |  F12 |      |      | Home | End  |      |
+|------+------+------+------+------+------+------+------+------+------+------+------+------+------|
+|      |      |      |      |      |      |      |      |      |      | Next | Vol- | Vol+ | Play |
+`-------------------------------------------------------------------------------------------------'
+
+```
+
+
+### Raise Layer
+```
+,-----------------------------------------.             ,-----------------------------------------.
+|      |      |      |      |      |      |             |      |      |      |      |      | Bksp |
+|------+------+------+------+------+------|             |------+------+------+------+------+------|
+|   `  |   1  |   2  |   3  |   4  |   5  |             |   6  |   7  |   8  |   9  |   0  | Del  |
+|------+------+------+------+------+------|             |------+------+------+------+------+------|
+|      |  F1  |  F2  |  F3  |  F4  |  F5  |             |  F6  |   -  |   =  |   [  |   ]  |  \   |
+|------+------+------+------+------+------+------+------+------+------+------+------+------+------|
+| CAPS |  F7  |  F8  |  F9  |  F10 |  F11 |      |      |  F12 |      |      |PageDn|PageUp|      |
+|------+------+------+------+------+------+------+------+------+------+------+------+------+------|
+|      |      |      |      |      |      |      |      |      |      | Next | Vol- | Vol+ | Play |
+`-------------------------------------------------------------------------------------------------'
+
+```
+
+### Adjust Layer (Lower + Raise)
+```
+,-----------------------------------------.             ,-----------------------------------------.
+|  F1  |  F2  |  F3  |  F4  |  F5  |  F6  |             |  F7  |  F8  |  F9  |  F10 |  F11 |  F12 |
+|------+------+------+------+------+------|             |------+------+------+------+------+------|
+|      | Reset|RGBRST|      |      |      |             |      |      |      |      |      |  Del |
+|------+------+------+------+------+------|             |------+------+------+------+------+------|
+|      |      |      |      |      | Mac  |             | Win  |      |      |      |      |      |
+|------+------+------+------+------+------+------+------+------+------+------+------+------+------|
+|      |      |      |      |      |      |      |      |      |      |RGB ON| HUE+ | SAT+ | VAL+ |
+|------+------+------+------+------+------+------+------+------+------+------+------+------+------|
+|      |      |      |      |      |      |      |      |      |      | MODE | HUE- | SAT- | VAL- |
+`-------------------------------------------------------------------------------------------------'
+```
+
+### Rotary Encoder Settings
+
+|L/R|Clockwise|Counter Clockwise|
+|---|---|---|
+|Left|Page Down|Page Up|
+|Right|Down|Up|
+
+### DipSW Settings
+
+|Switch No.||
+|---|---|
+|Left 1|Toggle Win/mac|
+|Left 2|Not assigned|
+|Right 1|Not assigned|
+|Right 2|Not assigned|

keyboards/helix/rev3_5rows/keymaps/via/rules.mk

@@ -0,0 +1 @@
+VIA_ENABLE = yes

keyboards/helix/rev3_5rows/oled_display.c

@@ -0,0 +1,123 @@
+/* Copyright 2020 yushakobo
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+ /*
+   How to Customize
+
+   $ make helix/rev3_5rows:YOUR_KEYMAP:clean
+   $ cp keyboards/helix/rev3_5rows/oled_display.c keyboards/helix/rev3_5rows/keymaps/YOUR_KEYMAP
+
+   $ edit keyboards/helix/rev3_5rows/keymaps/YOUR_KEYMAP/oled_display.c
+   $ make helix/rev3_5rows:YOUR_KEYMAP
+   $ make helix/rev3_5rows:YOUR_KEYMAP:flash
+ */
+
+#include QMK_KEYBOARD_H
+
+// Defines names for use in layer keycodes and the keymap
+enum layer_names {
+  _QWERTY = 0,
+  _LOWER,
+  _RAISE,
+  _ADJUST
+};
+
+#ifdef OLED_DRIVER_ENABLE
+
+void render_status(void) {
+
+  // Render to mode icon
+  static const char os_logo[][2][3] PROGMEM  ={{{0x95,0x96,0},{0xb5,0xb6,0}},{{0x97,0x98,0},{0xb7,0xb8,0}}};
+  if (is_mac_mode()) {
+    oled_write_P(os_logo[0][0], false);
+    oled_write_P(PSTR("\n"), false);
+    oled_write_P(os_logo[0][1], false);
+  }else{
+    oled_write_P(os_logo[1][0], false);
+    oled_write_P(PSTR("\n"), false);
+    oled_write_P(os_logo[1][1], false);
+  }
+
+  oled_write_P(PSTR(" "), false);
+
+  // Host Keyboard Layer Status
+  oled_write_P(PSTR("Layer: "), false);
+
+  switch (get_highest_layer(layer_state)) {
+      case _QWERTY:
+          oled_write_P(PSTR("Default\n"), false);
+          break;
+      case _RAISE:
+          oled_write_P(PSTR("Raise\n"), false);
+          break;
+      case _LOWER:
+          oled_write_P(PSTR("Lower\n"), false);
+          break;
+      case _ADJUST:
+          oled_write_P(PSTR("Adjust\n"), false);
+          break;
+      default:
+          // Or use the write_ln shortcut over adding '\n' to the end of your string
+          oled_write_ln_P(PSTR("Undefined"), false);
+  }
+
+  oled_write_P(PSTR("\n"), false);
+
+  // Host Keyboard LED Status
+  led_t led_state = host_keyboard_led_state();
+  oled_write_P(led_state.num_lock ? PSTR("NUM ") : PSTR("    "), false);
+  oled_write_P(led_state.caps_lock ? PSTR("CAP ") : PSTR("    "), false);
+  oled_write_P(led_state.scroll_lock ? PSTR("SCR ") : PSTR("    "), false);
+}
+
+
+static void render_logo(void) {
+    static const char PROGMEM qmk_logo[] = {
+        0x80, 0x81, 0x82, 0x83, 0x84, 0x85, 0x86, 0x87, 0x88, 0x89, 0x8A, 0x8B, 0x8C, 0x8D, 0x8E, 0x8F, 0x90, 0x91, 0x92, 0x93, 0x94,
+        0xA0, 0xA1, 0xA2, 0xA3, 0xA4, 0xA5, 0xA6, 0xA7, 0xA8, 0xA9, 0xAA, 0xAB, 0xAC, 0xAD, 0xAE, 0xAF, 0xB0, 0xB1, 0xB2, 0xB3, 0xB4,
+        0xC0, 0xC1, 0xC2, 0xC3, 0xC4, 0xC5, 0xC6, 0xC7, 0xC8, 0xC9, 0xCA, 0xCB, 0xCC, 0xCD, 0xCE, 0xCF, 0xD0, 0xD1, 0xD2, 0xD3, 0xD4, 0x00
+    };
+
+    oled_write_P(qmk_logo, false);
+}
+
+static void render_rgbled_status(bool full) {
+#ifdef RGBLIGHT_ENABLE
+  char buf[30];
+  if (RGBLIGHT_MODES > 1 && rgblight_is_enabled()) {
+      if (full) {
+          snprintf(buf, sizeof(buf), " LED %2d: %d,%d,%d ",
+                   rgblight_get_mode(),
+                   rgblight_get_hue()/RGBLIGHT_HUE_STEP,
+                   rgblight_get_sat()/RGBLIGHT_SAT_STEP,
+                   rgblight_get_val()/RGBLIGHT_VAL_STEP);
+      } else {
+          snprintf(buf, sizeof(buf), "[%2d] ", rgblight_get_mode());
+      }
+      oled_write(buf, false);
+  }
+#endif
+}
+
+void oled_task_user(void) {
+  if(is_keyboard_master()){
+    render_status();
+  }else{
+    render_logo();
+    render_rgbled_status(true);
+  }
+}
+#endif

keyboards/helix/rev3_5rows/readme.md

@@ -0,0 +1,13 @@
+# Helix rev3 5rows
+
+A compact split ortholinear keyboard.
+
+* Keyboard Maintainer: [yushakobo](https://github.com/yushakobo)
+* Hardware Supported: Helix rev3 PCBs, Pro Micro
+* Hardware Availability: (Under preparation)
+
+Make example for this keyboard (after setting up your build environment):
+
+    make helix/rev3_5rows:default:flash
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

keyboards/helix/rev3_5rows/rev3_5rows.c

@@ -0,0 +1,48 @@
+/* Copyright 2020 yushakobo
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include "helix.h"
+
+bool is_mac_mode(void) {
+    return keymap_config.swap_lalt_lgui == false;
+}
+
+void set_mac_mode(bool macmode) {
+    if (macmode) {
+        /* The result is the same as pressing the AG_NORM(=MAGIC_UNSWAP_ALT_GUI) key. */
+        /* https://github.com/qmk/qmk_firmware/blob/fb4a6ad30ea7a648acd59793ed4a30c3a8d8dc32/quantum/process_keycode/process_magic.c#L123-L124 */
+        keymap_config.swap_lalt_lgui = keymap_config.swap_ralt_rgui = false;
+    } else {
+        /* The result is the same as pressing the AG_SWAP(=MAGIC_SWAP_ALT_GUI) key. */
+        /* https://github.com/qmk/qmk_firmware/blob/fb4a6ad30ea7a648acd59793ed4a30c3a8d8dc32/quantum/process_keycode/process_magic.c#L80-L81 */
+        keymap_config.swap_lalt_lgui = keymap_config.swap_ralt_rgui = true;
+    }
+}
+
+void dip_switch_update_kb(uint8_t index, bool active) {
+    switch (index) {
+    case 0:
+        if(active) { // Left no.1  Helix rev3 common
+            set_mac_mode(false);
+        } else {
+            set_mac_mode(true);
+        }
+        break;
+    default: // Left no.2 or Right no.1 or Right no.2 for user/keymap
+        dip_switch_update_user(index, active);
+        break;
+    }
+}

keyboards/helix/rev3_5rows/rev3_5rows.h

@@ -0,0 +1,50 @@
+/* Copyright 2020 yushakobo
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+#include "quantum.h"
+
+bool is_mac_mode(void);
+void set_mac_mode(bool macmode);
+
+/* This is a shortcut to help you visually see your layout.
+ *
+ * The first section contains all of the arguments representing the physical
+ * layout of the board and position of the keys.
+ *
+ * The second converts the arguments into a two-dimensional array which
+ * represents the switch matrix.
+ */
+#define LAYOUT( \
+  L00, L01, L02, L03, L04, L05,           R00, R01, R02, R03, R04, R05, \
+  L10, L11, L12, L13, L14, L15,           R10, R11, R12, R13, R14, R15, \
+  L20, L21, L22, L23, L24, L25,           R20, R21, R22, R23, R24, R25, \
+  L30, L31, L32, L33, L34, L35, L36, R36, R30, R31, R32, R33, R34, R35, \
+  L40, L41, L42, L43, L44, L45, L46, R46, R40, R41, R42, R43, R44, R45  \
+  ) \
+  { \
+    { L00, L01, L02, L03, L04, L05, KC_NO }, \
+    { L10, L11, L12, L13, L14, L15, KC_NO }, \
+    { L20, L21, L22, L23, L24, L25, KC_NO }, \
+    { L30, L31, L32, L33, L34, L35, L36 }, \
+    { L40, L41, L42, L43, L44, L45, L46 }, \
+    { R05, R04, R03, R02, R01, R00, KC_NO }, \
+    { R15, R14, R13, R12, R11, R10, KC_NO }, \
+    { R25, R24, R23, R22, R21, R20, KC_NO }, \
+    { R35, R34, R33, R32, R31, R30, R36 }, \
+    { R45, R44, R43, R42, R41, R40, R46 } \
+ }

keyboards/helix/rev3_5rows/rules.mk

@@ -0,0 +1,10 @@
+EXTRAKEY_ENABLE = yes    # Audio control and System control
+RGBLIGHT_ENABLE = yes   # Enable keyboard RGB underglow
+SPLIT_KEYBOARD = yes
+#RGB_MATRIX_ENABLE = WS2812
+OLED_DRIVER_ENABLE = yes
+ENCODER_ENABLE = yes
+DIP_SWITCH_ENABLE = yes
+LTO_ENABLE = yes
+
+SRC += oled_display.c

keyboards/kbdfans/bella/soldered/keymaps/default/keymap.c

@@ -22,8 +22,8 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 		KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_GRV, KC_BSPC, KC_INS, 
 		KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, 
 		KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_PGDN, 
-		KC_LSFT, KC_BSLS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, 
-		KC_LCTL, KC_LALT, KC_LALT, KC_SPC, KC_RALT, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT),
+		KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, 
+		KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT),
 
 	LAYOUT_all(
 		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, 

keyboards/kbdfans/bella/soldered/keymaps/via/keymap.c

@@ -22,8 +22,8 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 		KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_GRV, KC_BSPC, KC_INS, 
 		KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, 
 		KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_PGDN, 
-		KC_LSFT, KC_BSLS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, 
-		KC_LCTL, KC_LALT, KC_LALT, KC_SPC, KC_RALT, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT),
+		KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, 
+		KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT),
 
 	LAYOUT_all(
 		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, 

keyboards/kbdfans/bella/soldered/soldered.h

@@ -23,12 +23,12 @@
 	K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213,       K215, \
 	K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311,       K313,       K315, \
 	K400, K401, K402, K403, K404, K405, K406, K407, K408, K409, K410, K411, K412,       K414,       \
-	K500, K501, K502,                   K506,                   K510, K511,       K513, K514, K515  \
+	K500, K501, K502,                   K506,                   K510, K511, K512,       K514, K515  \
 ) { \
 	{ K000,  KC_NO, K002,  K003,  K004,  K005,  K006,  K007,  K008,  K009,  KC_NO, K011,  K012,  K013,  K014,  K015 }, \
 	{ K100,  K101,  K102,  K103,  K104,  K105,  K106,  K107,  K108,  K109,  K110,  K111,  K112,  K113,  K114,  K115 }, \
 	{ K200,  K201,  K202,  K203,  K204,  K205,  K206,  K207,  K208,  K209,  K210,  K211,  K212,  K213,  KC_NO, K215 }, \
 	{ K300,  K301,  K302,  K303,  K304,  K305,  K306,  K307,  K308,  K309,  K310,  K311,  KC_NO, K313,  KC_NO, K315 }, \
 	{ K400,  K401,  K402,  K403,  K404,  K405,  K406,  K407,  K408,  K409,  K410,  K411,  K412,  KC_NO, K414,  KC_NO }, \
-	{ K500,  K501,  K502,  KC_NO, KC_NO, KC_NO, K506,  KC_NO, KC_NO, KC_NO, K510,  K511,  KC_NO, K513,  K514,  K515 }  \
+	{ K500,  K501,  K502,  KC_NO, KC_NO, KC_NO, K506,  KC_NO, KC_NO, KC_NO, K510,  K511,  K512,  KC_NO, K514,  K515 }  \
 }

keyboards/kbdfans/maja/maja.c

@@ -102,3 +102,12 @@ void suspend_wakeup_init_kb(void) {
     rgb_matrix_set_suspend_state(false);
     suspend_wakeup_init_user();
 }
+
+__attribute__ ((weak))
+void rgb_matrix_indicators_user(void)
+{
+    if (host_keyboard_led_state().caps_lock)
+    {
+        rgb_matrix_set_color(30, 0xFF, 0xFF, 0xFF);
+    }
+}