CLI: Fix stripping of ANY from Configurator exports (#10585)

058737f broke it ¯\_(ツ)_/¯

keyboards/emajesty/eiri/config.h

@@ -0,0 +1,96 @@
+/*
+Copyright 2020 EMajesty
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID    0xFEED
+#define PRODUCT_ID   0x9372
+#define DEVICE_VER   0x0001
+#define MANUFACTURER EMajesty
+#define PRODUCT      eiri
+
+/* key matrix size */
+#define MATRIX_ROWS 4
+#define MATRIX_COLS 12
+
+/*
+ * Keyboard Matrix Assignments
+ *
+ * Change this to how you wired your keyboard
+ * COLS: AVR pins used for columns, left to right
+ * ROWS: AVR pins used for rows, top to bottom
+ * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
+ *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
+ *
+ */
+#define MATRIX_ROW_PINS { B4, B5, B2, B6 }
+#define MATRIX_COL_PINS { D1, D0, D4, C6, D7, E6, B3, B1, F7, F6, F5, F4 }
+#define UNUSED_PINS
+
+/* COL2ROW, ROW2COL */
+#define DIODE_DIRECTION COL2ROW
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCE 5
+
+/*
+ * Force NKRO
+ *
+ * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
+ * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
+ * makefile for this to work.)
+ *
+ * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
+ * until the next keyboard reset.
+ *
+ * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
+ * fully operational during normal computer usage.
+ *
+ * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
+ * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
+ * bootmagic, NKRO mode will always be enabled until it is toggled again during a
+ * power-up.
+ *
+ */
+//#define FORCE_NKRO
+
+/*
+ * Feature disable options
+ *  These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+//#define NO_DEBUG
+
+/* disable print */
+//#define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+
+/* disable these deprecated features by default */
+#define NO_ACTION_MACRO
+#define NO_ACTION_FUNCTION
+
+/* Bootmagic Lite key configuration */
+//#define BOOTMAGIC_LITE_ROW 0
+//#define BOOTMAGIC_LITE_COLUMN 0

keyboards/emajesty/eiri/eiri.c

@@ -0,0 +1,17 @@
+/* Copyright 2020 EMajesty
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include "eiri.h"

keyboards/emajesty/eiri/eiri.h

@@ -0,0 +1,40 @@
+/* Copyright 2020 EMajesty
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+#include "quantum.h"
+
+/* This is a shortcut to help you visually see your layout.
+ *
+ * The first section contains all of the arguments representing the physical
+ * layout of the board and position of the keys.
+ *
+ * The second converts the arguments into a two-dimensional array which
+ * represents the switch matrix.
+ */
+#define LAYOUT( \
+    K00, K01, K02, K03, K04, K05,               K06, K07, K08, K09, K10, K11, \
+    K12, K13, K14, K15, K16, K17,               K18, K19, K20, K21, K22, K23, \
+    K24, K25, K26, K27, K28, K29,               K30, K31, K32, K33, K34, K35, \
+              K36, K37, K38, K39, K40,     K41, K42, K43, K44, K45 \
+) { \
+    { K00,   K01, K02, K03, K04, K05, K06, K07, K08, K09, K10, K11   }, \
+    { K12,   K13, K14, K15, K16, K17, K18, K19, K20, K21, K22, K23   }, \
+    { K24,   K25, K26, K27, K28, K29, K30, K31, K32, K33, K34, K35   }, \
+    { KC_NO, K36, K37, K38, K39, K40, K41, K42, K43, K44, K45, KC_NO } \
+}
+

keyboards/emajesty/eiri/info.json

@@ -0,0 +1,12 @@
+{
+    "keyboard_name": "eiri",
+    "url": "https://github.com/EMajesty/eiri",
+    "maintainer": "EMajesty",
+    "width": 15,
+    "height": 4.5,
+    "layouts": {
+        "LAYOUT": {
+            "layout": [{"x":3, "y":0}, {"x":11, "y":0}, {"x":2, "y":0.25}, {"x":4, "y":0.25}, {"x":10, "y":0.25}, {"x":12, "y":0.25}, {"x":1, "y":0.5}, {"x":5, "y":0.5}, {"x":9, "y":0.5}, {"x":13, "y":0.5}, {"x":0, "y":0.75}, {"x":14, "y":0.75}, {"x":3, "y":1}, {"x":11, "y":1}, {"x":2, "y":1.25}, {"x":4, "y":1.25}, {"x":10, "y":1.25}, {"x":12, "y":1.25}, {"x":1, "y":1.5}, {"x":5, "y":1.5}, {"x":9, "y":1.5}, {"x":13, "y":1.5}, {"x":0, "y":1.75}, {"x":14, "y":1.75}, {"x":3, "y":2}, {"x":11, "y":2}, {"x":2, "y":2.25}, {"x":4, "y":2.25}, {"x":10, "y":2.25}, {"x":12, "y":2.25}, {"x":1, "y":2.5}, {"x":5, "y":2.5}, {"x":9, "y":2.5}, {"x":13, "y":2.5}, {"x":0, "y":2.75}, {"x":14, "y":2.75}, {"x":3, "y":3}, {"x":11, "y":3}, {"x":2, "y":3.25}, {"x":4, "y":3.25}, {"x":10, "y":3.25}, {"x":12, "y":3.25}, {"x":5, "y":3.5}, {"x":6, "y":3.5}, {"x":8, "y":3.5}, {"x":9, "y":3.5}]
+        }
+    }
+}

keyboards/emajesty/eiri/keymaps/default/keymap.c

@@ -0,0 +1,34 @@
+/* Copyright 2020 EMajesty
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+    [0] = LAYOUT(
+        KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,                           KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_BSLS,
+        KC_LCTL, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,                           KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT,
+        KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,                           KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_RSFT,
+                          KC_LGUI, KC_LALT, KC_SPC,  KC_DEL,  MO(1),        MO(2),   KC_ENT, KC_BSPC, KC_RALT, KC_RGUI),
+    [1] = LAYOUT(
+        KC_ESC,  _______, KC_UP,   _______, KC_HOME, KC_PGUP,                        _______, _______, _______, KC_LPRN, KC_RPRN, KC_GRV,
+        _______, KC_LEFT, KC_DOWN, KC_RGHT, KC_END,  KC_PGDN,                        _______, KC_MINS, KC_EQL,  KC_LBRC, KC_RBRC, _______,
+        _______, KC_MPRV, KC_MPLY, KC_MNXT, _______, _______,                        _______, _______, _______, KC_LCBR, KC_RCBR, _______,
+                          _______, _______, _______, _______, _______,      _______, _______, _______, _______, _______),
+    [2] = LAYOUT(
+        RESET,   KC_1,    KC_2,    KC_3,    KC_4,    KC_5,                           KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    _______,
+        _______, KC_EXLM, KC_AT,   KC_HASH, KC_DLR,  KC_PERC,                        KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, _______,
+        KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,                          KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,
+                          _______, _______, _______, _______, _______,      _______, _______, _______, _______, _______)
+};

keyboards/emajesty/eiri/keymaps/default/readme.md

@@ -0,0 +1,3 @@
+![default keymap](https://imgur.com/F3L3z8w.png)
+
+# The default keymap for eiri

keyboards/emajesty/eiri/readme.md

@@ -0,0 +1,19 @@
+# eiri
+
+![eiri](https://imgur.com/ZiLTj3Pl.png)
+
+An Atreus-inspired 40% keyboard with 6 columns
+
+* Keyboard Maintainer: [EMajesty](https://github.com/EMajesty)
+* Hardware Supported: eiri pcb
+* Hardware Availability: [Project is open source](https://github.com/EMajesty/eiri)
+
+Make example for this keyboard (after setting up your build environment):
+
+    make emajesty/eiri:default
+
+Flashing example for this keyboard:
+
+    make emajesty/eiri:default:flash
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

keyboards/emajesty/eiri/rules.mk

@@ -0,0 +1,22 @@
+# MCU name
+MCU = atmega32u4
+
+# Bootloader selection
+BOOTLOADER = caterina
+
+# Build Options
+#   change yes to no to disable
+#
+BOOTMAGIC_ENABLE = lite     # Virtual DIP switch configuration
+MOUSEKEY_ENABLE = yes       # Mouse keys
+EXTRAKEY_ENABLE = yes       # Audio control and System control
+CONSOLE_ENABLE = no         # Console for debug
+COMMAND_ENABLE = no         # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = no            # USB Nkey Rollover
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
+RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
+BLUETOOTH_ENABLE = no       # Enable Bluetooth
+AUDIO_ENABLE = no           # Audio output

keyboards/handwired/leftynumpad/config.h

@@ -0,0 +1,102 @@
+/*
+Copyright 2020 Tom Swartz
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID 0xFEED
+#define PRODUCT_ID 0xBEEF
+#define DEVICE_VER 0x0001
+#define MANUFACTURER Tom Swartz
+#define PRODUCT LeftyNumpad
+/* key matrix size */
+#define MATRIX_ROWS 5
+#define MATRIX_COLS 5
+
+/*
+ * Keyboard Matrix Assignments
+ *
+ * Change this to how you wired your keyboard
+ * COLS: AVR pins used for columns, left to right
+ * ROWS: AVR pins used for rows, top to bottom
+ * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
+ *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
+ *
+ */
+#define MATRIX_ROW_PINS { D1, D0, D4, C6, D7 }
+#define MATRIX_COL_PINS { E6, B4, B5, B6, B2 }
+#define UNUSED_PINS {D3, D2, B0, D5, B3, B1, F7, F6, F5, F4 }
+
+/* COL2ROW, ROW2COL*/
+#define DIODE_DIRECTION COL2ROW
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCE 10
+
+/* define if matrix has ghost (lacks anti-ghosting diodes) */
+//#define MATRIX_HAS_GHOST
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
+ * This is userful for the Windows task manager shortcut (ctrl+shift+esc).
+ */
+// #define GRAVE_ESC_CTRL_OVERRIDE
+
+/*
+ * Force NKRO
+ *
+ * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
+ * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
+ * makefile for this to work.)
+ *
+ * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
+ * until the next keyboard reset.
+ *
+ * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
+ * fully operational during normal computer usage.
+ *
+ * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
+ * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
+ * bootmagic, NKRO mode will always be enabled until it is toggled again during a
+ * power-up.
+ *
+ */
+//#define FORCE_NKRO
+/*
+ * Feature disable options
+ *  These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+//#define NO_DEBUG
+
+/* disable print */
+//#define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+
+/* disable these deprecated features by default */
+#define NO_ACTION_MACRO
+#define NO_ACTION_FUNCTION

keyboards/handwired/leftynumpad/info.json

@@ -0,0 +1,36 @@
+{
+    "keyboard_name": "LeftyNumpad",
+    "url": "https://github.com/tomswartz07",
+    "maintainer": "Tom Swartz",
+    "width": 5,
+    "height": 5,
+    "layouts": {
+        "LAYOUT": {
+            "layout": [
+                    {"label":"0,0", "x":0, "y":0},
+                    {"label":"1,0", "x":1, "y":0},
+                    {"label":"2,0", "x":2, "y":0},
+                    {"label":"3,0", "x":3, "y":0},
+                    {"label":"4,0", "x":4, "y":0},
+                    {"label":"0,1", "x":0, "y":1},
+                    {"label":"1,1", "x":1, "y":1},
+                    {"label":"2,1", "x":2, "y":1},
+                    {"label":"3,1", "x":3, "y":1},
+                    {"label":"0,2", "x":0, "y":2},
+                    {"label":"1,2", "x":1, "y":2},
+                    {"label":"2,2", "x":2, "y":2},
+                    {"label":"3,2", "x":3, "y":2},
+                    {"label":"5,1", "x":4, "y":1, "h":2},
+                    {"label":"0,3", "x":0, "y":3},
+                    {"label":"1,3", "x":1, "y":3},
+                    {"label":"2,3", "x":2, "y":3},
+                    {"label":"3,3", "x":3, "y":3},
+                    {"label":"0,4", "x":0, "y":4},
+                    {"label":"1,4", "x":1, "y":4},
+                    {"label":"2,4", "x":2, "y":4},
+                    {"label":"3,4", "x":3, "y":4},
+                    {"label":"4,3", "x":4, "y":3, "h":2}
+            ]
+        }
+    }
+}

keyboards/handwired/leftynumpad/keymaps/default/keymap.c

@@ -0,0 +1,92 @@
+/* Copyright 2020 Tom Swartz
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+
+// Defines names for use in layer keycodes and the keymap
+enum layer_names {
+    _NP,
+    _FN
+};
+
+// Defines the keycodes used by our macros in process_record_user
+enum custom_keycodes {
+    KC_00 = SAFE_RANGE,
+};
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+/* NumberPad Layer
+    ,---------------------------------------.
+    | Back  | Num   | /     | *     | -     |
+    | Space | Lock  |       |       |       |
+    |-------+-------+-------+-------+-------|
+    | Tab   | 7     | 8     | 9     | +     |
+    |       | Home  | Up    | PgUp  |       |
+    |-------+-------+-------+-------|       |
+    | Layer | 4     | 5     | 6     |       |
+    | Toggle| Left  |       | Right |       |
+    |-------+-------+-------+-------+-------|
+    | Page  | 1     | 2     | 3     | Enter |
+    | Up    | End   | Down  | PgDn  |       |
+    |-------+-------+-------+-------|       |
+    | Page  | 00    | 0     | .     |       |
+    | Down  |       |       |       |       |
+    `---------------------------------------'
+*/
+    [_NP] = LAYOUT(
+        KC_BSPC,   KC_NLCK, KC_PSLS, KC_PAST, KC_PMNS,
+        KC_TAB,    KC_7,    KC_8,   KC_9,
+        TG(_NP),   KC_4,    KC_5,   KC_6,    KC_PPLS,
+        KC_PGUP,   KC_1,    KC_2,   KC_3,
+        KC_PGDOWN, KC_00,   KC_0,   KC_PDOT, KC_PENT
+    ),
+/* Macropad/Function Layer
+    ,---------------------------------------.
+    | `~    | Play  | F13   | Prev  | Next  |
+    |       | Pause |       |       |       |
+    |-------+-------+-------+-------+-------|
+    | Tab   | F14   | F15   | 9     | +     |
+    |       |       |       | PgUp  |       |
+    |-------+-------+-------+-------|       |
+    | Layer | 4     | 5     | 6     |       |
+    | Toggle| Left  |       | Right |       |
+    |-------+-------+-------+-------+-------|
+    | U     | B     | 2     | 3     | Enter |
+    |       |       | Down  | PgDn  |       |
+    |-------+-------+-------+-------|       |
+    | D     | F     | 0     | .     |       |
+    |       |       |       |       |       |
+    `---------------------------------------'
+*/
+    [_FN] = LAYOUT(
+        KC_GRV,  KC_MPLY, KC_F13,  KC_MPRV, KC_MNXT,
+        _______, KC_F14,  KC_F15,  _______,
+        _______, _______, _______, _______, _______,
+        KC_U,    KC_B,    _______, _______,
+        KC_D,    KC_F,    _______, _______, _______
+    ),
+};
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+    switch (keycode) {
+        case KC_00:
+            if (record->event.pressed) {
+                // when keycode DOUBLEZERO is pressed
+                SEND_STRING("00");
+            }
+            break;
+    }
+    return true;
+}

keyboards/handwired/leftynumpad/keymaps/default/readme.md

@@ -0,0 +1,21 @@
+# The default keymap for LeftyNumpad
+
+## Base Layer
+```
+    ,---------------------------------------.
+    | Back  | Num   | /     | *     | -     |
+    | Space | Lock  |       |       |       |
+    |-------+-------+-------+-------+-------|
+    | Layer | 7     | 8     | 9     | +     |
+    | Up    | Home  | Up    | PgUp  |       |
+    |-------+-------+-------+-------|       |
+    | Layer | 4     | 5     | 6     |       |
+    | Down  | Left  |       | Right |       |
+    |-------+-------+-------+-------+-------|
+    | Page  | 1     | 2     | 3     | Enter |
+    | Up    | End   | Down  | PgDn  |       |
+    |-------+-------+-------+-------|       |
+    | Page  | 00    | 0     | .     |       |
+    | Down  |       |       |       |       |
+    `---------------------------------------'
+```

keyboards/handwired/leftynumpad/leftynumpad.c

@@ -0,0 +1,17 @@
+/* Copyright 2020 Tom Swartz
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include "leftynumpad.h"

keyboards/handwired/leftynumpad/leftynumpad.h

@@ -0,0 +1,42 @@
+/* Copyright 2020 Tom Swartz
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+#include "quantum.h"
+
+/* This is a shortcut to help you visually see your layout.
+ *
+ * The first section contains all of the arguments representing the physical
+ * layout of the board and position of the keys.
+ *
+ * The second converts the arguments into a two-dimensional array which
+ * represents the switch matrix.
+ */
+#define LAYOUT( \
+   K05,  K15,  K25,  K35,  K45,  \
+   K04,  K14,  K24,  K34,        \
+   K03,  K13,  K23,  K33,  K43,  \
+   K02,  K12,  K22,  K32,        \
+   K01,  K11,  K21,  K31,  K41   \
+) \
+{ \
+ { K05,  K15,  K25,  K35,  K45 }, \
+ { K04,  K14,  K24,  K34       }, \
+ { K03,  K13,  K23,  K33,  K43 }, \
+ { K02,  K12,  K22,  K32       }, \
+ { K01,  K11,  K21,  K31,  K41 }  \
+}

keyboards/handwired/leftynumpad/readme.md

@@ -0,0 +1,16 @@
+# LeftyNumpad
+
+![Image of LeftyNumpad](https://i.imgur.com/kkSPIxpl.png)
+
+A small numberpad/macropad intended to be placed southpaw-style on the left
+side of a keyboard.
+
+* Keyboard Maintainer: [Tom Swartz](https://github.com/tomswartz07)
+* Hardware Supported: Handwired, Uses Arudino Micro.
+* Hardware Availability: Handwired hardware.
+
+Make example for this keyboard (after setting up your build environment):
+
+    make handwired/leftynumpad:default
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

keyboards/handwired/leftynumpad/rules.mk

@@ -0,0 +1,22 @@
+# MCU name
+MCU = atmega32u4
+
+# Bootloader selection
+BOOTLOADER = atmel-dfu
+
+# Build Options
+#   change yes to no to disable
+#
+BOOTMAGIC_ENABLE = lite     # Virtual DIP switch configuration
+MOUSEKEY_ENABLE = yes       # Mouse keys
+EXTRAKEY_ENABLE = yes       # Audio control and System control
+CONSOLE_ENABLE = no         # Console for debug
+COMMAND_ENABLE = no         # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = no            # USB Nkey Rollover
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
+RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
+BLUETOOTH_ENABLE = no       # Enable Bluetooth
+AUDIO_ENABLE = no           # Audio output

keyboards/handwired/riblee_f401/chconf.h

@@ -1,714 +0,0 @@
-/*
-    ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio
-
-    Licensed under the Apache License, Version 2.0 (the "License");
-    you may not use this file except in compliance with the License.
-    You may obtain a copy of the License at
-
-        http://www.apache.org/licenses/LICENSE-2.0
-
-    Unless required by applicable law or agreed to in writing, software
-    distributed under the License is distributed on an "AS IS" BASIS,
-    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-    See the License for the specific language governing permissions and
-    limitations under the License.
-*/
-
-/**
- * @file    rt/templates/chconf.h
- * @brief   Configuration file template.
- * @details A copy of this file must be placed in each project directory, it
- *          contains the application specific kernel settings.
- *
- * @addtogroup config
- * @details Kernel related settings and hooks.
- * @{
- */
-
-#ifndef CHCONF_H
-#define CHCONF_H
-
-#define _CHIBIOS_RT_CONF_
-#define _CHIBIOS_RT_CONF_VER_6_0_
-
-/*===========================================================================*/
-/**
- * @name System timers settings
- * @{
- */
-/*===========================================================================*/
-
-/**
- * @brief   System time counter resolution.
- * @note    Allowed values are 16 or 32 bits.
- */
-#if !defined(CH_CFG_ST_RESOLUTION)
-#define CH_CFG_ST_RESOLUTION                32
-#endif
-
-/**
- * @brief   System tick frequency.
- * @details Frequency of the system timer that drives the system ticks. This
- *          setting also defines the system tick time unit.
- */
-#if !defined(CH_CFG_ST_FREQUENCY)
-#define CH_CFG_ST_FREQUENCY                 10000
-#endif
-
-/**
- * @brief   Time intervals data size.
- * @note    Allowed values are 16, 32 or 64 bits.
- */
-#if !defined(CH_CFG_INTERVALS_SIZE)
-#define CH_CFG_INTERVALS_SIZE               32
-#endif
-
-/**
- * @brief   Time types data size.
- * @note    Allowed values are 16 or 32 bits.
- */
-#if !defined(CH_CFG_TIME_TYPES_SIZE)
-#define CH_CFG_TIME_TYPES_SIZE              32
-#endif
-
-/**
- * @brief   Time delta constant for the tick-less mode.
- * @note    If this value is zero then the system uses the classic
- *          periodic tick. This value represents the minimum number
- *          of ticks that is safe to specify in a timeout directive.
- *          The value one is not valid, timeouts are rounded up to
- *          this value.
- */
-#if !defined(CH_CFG_ST_TIMEDELTA)
-#define CH_CFG_ST_TIMEDELTA                 2
-#endif
-
-/** @} */
-
-/*===========================================================================*/
-/**
- * @name Kernel parameters and options
- * @{
- */
-/*===========================================================================*/
-
-/**
- * @brief   Round robin interval.
- * @details This constant is the number of system ticks allowed for the
- *          threads before preemption occurs. Setting this value to zero
- *          disables the preemption for threads with equal priority and the
- *          round robin becomes cooperative. Note that higher priority
- *          threads can still preempt, the kernel is always preemptive.
- * @note    Disabling the round robin preemption makes the kernel more compact
- *          and generally faster.
- * @note    The round robin preemption is not supported in tickless mode and
- *          must be set to zero in that case.
- */
-#if !defined(CH_CFG_TIME_QUANTUM)
-#define CH_CFG_TIME_QUANTUM                 0
-#endif
-
-/**
- * @brief   Managed RAM size.
- * @details Size of the RAM area to be managed by the OS. If set to zero
- *          then the whole available RAM is used. The core memory is made
- *          available to the heap allocator and/or can be used directly through
- *          the simplified core memory allocator.
- *
- * @note    In order to let the OS manage the whole RAM the linker script must
- *          provide the @p __heap_base__ and @p __heap_end__ symbols.
- * @note    Requires @p CH_CFG_USE_MEMCORE.
- */
-#if !defined(CH_CFG_MEMCORE_SIZE)
-#define CH_CFG_MEMCORE_SIZE                 0
-#endif
-
-/**
- * @brief   Idle thread automatic spawn suppression.
- * @details When this option is activated the function @p chSysInit()
- *          does not spawn the idle thread. The application @p main()
- *          function becomes the idle thread and must implement an
- *          infinite loop.
- */
-#if !defined(CH_CFG_NO_IDLE_THREAD)
-#define CH_CFG_NO_IDLE_THREAD               FALSE
-#endif
-
-/** @} */
-
-/*===========================================================================*/
-/**
- * @name Performance options
- * @{
- */
-/*===========================================================================*/
-
-/**
- * @brief   OS optimization.
- * @details If enabled then time efficient rather than space efficient code
- *          is used when two possible implementations exist.
- *
- * @note    This is not related to the compiler optimization options.
- * @note    The default is @p TRUE.
- */
-#if !defined(CH_CFG_OPTIMIZE_SPEED)
-#define CH_CFG_OPTIMIZE_SPEED               TRUE
-#endif
-
-/** @} */
-
-/*===========================================================================*/
-/**
- * @name Subsystem options
- * @{
- */
-/*===========================================================================*/
-
-/**
- * @brief   Time Measurement APIs.
- * @details If enabled then the time measurement APIs are included in
- *          the kernel.
- *
- * @note    The default is @p TRUE.
- */
-#if !defined(CH_CFG_USE_TM)
-#define CH_CFG_USE_TM                       TRUE
-#endif
-
-/**
- * @brief   Threads registry APIs.
- * @details If enabled then the registry APIs are included in the kernel.
- *
- * @note    The default is @p TRUE.
- */
-#if !defined(CH_CFG_USE_REGISTRY)
-#define CH_CFG_USE_REGISTRY                 TRUE
-#endif
-
-/**
- * @brief   Threads synchronization APIs.
- * @details If enabled then the @p chThdWait() function is included in
- *          the kernel.
- *
- * @note    The default is @p TRUE.
- */
-#if !defined(CH_CFG_USE_WAITEXIT)
-#define CH_CFG_USE_WAITEXIT                 TRUE
-#endif
-
-/**
- * @brief   Semaphores APIs.
- * @details If enabled then the Semaphores APIs are included in the kernel.
- *
- * @note    The default is @p TRUE.
- */
-#if !defined(CH_CFG_USE_SEMAPHORES)
-#define CH_CFG_USE_SEMAPHORES               TRUE
-#endif
-
-/**
- * @brief   Semaphores queuing mode.
- * @details If enabled then the threads are enqueued on semaphores by
- *          priority rather than in FIFO order.
- *
- * @note    The default is @p FALSE. Enable this if you have special
- *          requirements.
- * @note    Requires @p CH_CFG_USE_SEMAPHORES.
- */
-#if !defined(CH_CFG_USE_SEMAPHORES_PRIORITY)
-#define CH_CFG_USE_SEMAPHORES_PRIORITY      FALSE
-#endif
-
-/**
- * @brief   Mutexes APIs.
- * @details If enabled then the mutexes APIs are included in the kernel.
- *
- * @note    The default is @p TRUE.
- */
-#if !defined(CH_CFG_USE_MUTEXES)
-#define CH_CFG_USE_MUTEXES                  TRUE
-#endif
-
-/**
- * @brief   Enables recursive behavior on mutexes.
- * @note    Recursive mutexes are heavier and have an increased
- *          memory footprint.
- *
- * @note    The default is @p FALSE.
- * @note    Requires @p CH_CFG_USE_MUTEXES.
- */
-#if !defined(CH_CFG_USE_MUTEXES_RECURSIVE)
-#define CH_CFG_USE_MUTEXES_RECURSIVE        FALSE
-#endif
-
-/**
- * @brief   Conditional Variables APIs.
- * @details If enabled then the conditional variables APIs are included
- *          in the kernel.
- *
- * @note    The default is @p TRUE.
- * @note    Requires @p CH_CFG_USE_MUTEXES.
- */
-#if !defined(CH_CFG_USE_CONDVARS)
-#define CH_CFG_USE_CONDVARS                 TRUE
-#endif
-
-/**
- * @brief   Conditional Variables APIs with timeout.
- * @details If enabled then the conditional variables APIs with timeout
- *          specification are included in the kernel.
- *
- * @note    The default is @p TRUE.
- * @note    Requires @p CH_CFG_USE_CONDVARS.
- */
-#if !defined(CH_CFG_USE_CONDVARS_TIMEOUT)
-#define CH_CFG_USE_CONDVARS_TIMEOUT         TRUE
-#endif
-
-/**
- * @brief   Events Flags APIs.
- * @details If enabled then the event flags APIs are included in the kernel.
- *
- * @note    The default is @p TRUE.
- */
-#if !defined(CH_CFG_USE_EVENTS)
-#define CH_CFG_USE_EVENTS                   TRUE
-#endif
-
-/**
- * @brief   Events Flags APIs with timeout.
- * @details If enabled then the events APIs with timeout specification
- *          are included in the kernel.
- *
- * @note    The default is @p TRUE.
- * @note    Requires @p CH_CFG_USE_EVENTS.
- */
-#if !defined(CH_CFG_USE_EVENTS_TIMEOUT)
-#define CH_CFG_USE_EVENTS_TIMEOUT           TRUE
-#endif
-
-/**
- * @brief   Synchronous Messages APIs.
- * @details If enabled then the synchronous messages APIs are included
- *          in the kernel.
- *
- * @note    The default is @p TRUE.
- */
-#if !defined(CH_CFG_USE_MESSAGES)
-#define CH_CFG_USE_MESSAGES                 TRUE
-#endif
-
-/**
- * @brief   Synchronous Messages queuing mode.
- * @details If enabled then messages are served by priority rather than in
- *          FIFO order.
- *
- * @note    The default is @p FALSE. Enable this if you have special
- *          requirements.
- * @note    Requires @p CH_CFG_USE_MESSAGES.
- */
-#if !defined(CH_CFG_USE_MESSAGES_PRIORITY)
-#define CH_CFG_USE_MESSAGES_PRIORITY        FALSE
-#endif
-
-/**
- * @brief   Mailboxes APIs.
- * @details If enabled then the asynchronous messages (mailboxes) APIs are
- *          included in the kernel.
- *
- * @note    The default is @p TRUE.
- * @note    Requires @p CH_CFG_USE_SEMAPHORES.
- */
-#if !defined(CH_CFG_USE_MAILBOXES)
-#define CH_CFG_USE_MAILBOXES                TRUE
-#endif
-
-/**
- * @brief   Core Memory Manager APIs.
- * @details If enabled then the core memory manager APIs are included
- *          in the kernel.
- *
- * @note    The default is @p TRUE.
- */
-#if !defined(CH_CFG_USE_MEMCORE)
-#define CH_CFG_USE_MEMCORE                  TRUE
-#endif
-
-/**
- * @brief   Heap Allocator APIs.
- * @details If enabled then the memory heap allocator APIs are included
- *          in the kernel.
- *
- * @note    The default is @p TRUE.
- * @note    Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or
- *          @p CH_CFG_USE_SEMAPHORES.
- * @note    Mutexes are recommended.
- */
-#if !defined(CH_CFG_USE_HEAP)
-#define CH_CFG_USE_HEAP                     TRUE
-#endif
-
-/**
- * @brief   Memory Pools Allocator APIs.
- * @details If enabled then the memory pools allocator APIs are included
- *          in the kernel.
- *
- * @note    The default is @p TRUE.
- */
-#if !defined(CH_CFG_USE_MEMPOOLS)
-#define CH_CFG_USE_MEMPOOLS                 TRUE
-#endif
-
-/**
- * @brief   Objects FIFOs APIs.
- * @details If enabled then the objects FIFOs APIs are included
- *          in the kernel.
- *
- * @note    The default is @p TRUE.
- */
-#if !defined(CH_CFG_USE_OBJ_FIFOS)
-#define CH_CFG_USE_OBJ_FIFOS                TRUE
-#endif
-
-/**
- * @brief   Pipes APIs.
- * @details If enabled then the pipes APIs are included
- *          in the kernel.
- *
- * @note    The default is @p TRUE.
- */
-#if !defined(CH_CFG_USE_PIPES)
-#define CH_CFG_USE_PIPES                    TRUE
-#endif
-
-/**
- * @brief   Dynamic Threads APIs.
- * @details If enabled then the dynamic threads creation APIs are included
- *          in the kernel.
- *
- * @note    The default is @p TRUE.
- * @note    Requires @p CH_CFG_USE_WAITEXIT.
- * @note    Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS.
- */
-#if !defined(CH_CFG_USE_DYNAMIC)
-#define CH_CFG_USE_DYNAMIC                  TRUE
-#endif
-
-/** @} */
-
-/*===========================================================================*/
-/**
- * @name Objects factory options
- * @{
- */
-/*===========================================================================*/
-
-/**
- * @brief   Objects Factory APIs.
- * @details If enabled then the objects factory APIs are included in the
- *          kernel.
- *
- * @note    The default is @p FALSE.
- */
-#if !defined(CH_CFG_USE_FACTORY)
-#define CH_CFG_USE_FACTORY                  TRUE
-#endif
-
-/**
- * @brief   Maximum length for object names.
- * @details If the specified length is zero then the name is stored by
- *          pointer but this could have unintended side effects.
- */
-#if !defined(CH_CFG_FACTORY_MAX_NAMES_LENGTH)
-#define CH_CFG_FACTORY_MAX_NAMES_LENGTH     8
-#endif
-
-/**
- * @brief   Enables the registry of generic objects.
- */
-#if !defined(CH_CFG_FACTORY_OBJECTS_REGISTRY)
-#define CH_CFG_FACTORY_OBJECTS_REGISTRY     TRUE
-#endif
-
-/**
- * @brief   Enables factory for generic buffers.
- */
-#if !defined(CH_CFG_FACTORY_GENERIC_BUFFERS)
-#define CH_CFG_FACTORY_GENERIC_BUFFERS      TRUE
-#endif
-
-/**
- * @brief   Enables factory for semaphores.
- */
-#if !defined(CH_CFG_FACTORY_SEMAPHORES)
-#define CH_CFG_FACTORY_SEMAPHORES           TRUE
-#endif
-
-/**
- * @brief   Enables factory for mailboxes.
- */
-#if !defined(CH_CFG_FACTORY_MAILBOXES)
-#define CH_CFG_FACTORY_MAILBOXES            TRUE
-#endif
-
-/**
- * @brief   Enables factory for objects FIFOs.
- */
-#if !defined(CH_CFG_FACTORY_OBJ_FIFOS)
-#define CH_CFG_FACTORY_OBJ_FIFOS            TRUE
-#endif
-
-/**
- * @brief   Enables factory for Pipes.
- */
-#if !defined(CH_CFG_FACTORY_PIPES) || defined(__DOXYGEN__)
-#define CH_CFG_FACTORY_PIPES                TRUE
-#endif
-
-/** @} */
-
-/*===========================================================================*/
-/**
- * @name Debug options
- * @{
- */
-/*===========================================================================*/
-
-/**
- * @brief   Debug option, kernel statistics.
- *
- * @note    The default is @p FALSE.
- */
-#if !defined(CH_DBG_STATISTICS)
-#define CH_DBG_STATISTICS                   FALSE
-#endif
-
-/**
- * @brief   Debug option, system state check.
- * @details If enabled the correct call protocol for system APIs is checked
- *          at runtime.
- *
- * @note    The default is @p FALSE.
- */
-#if !defined(CH_DBG_SYSTEM_STATE_CHECK)
-#define CH_DBG_SYSTEM_STATE_CHECK           FALSE
-#endif
-
-/**
- * @brief   Debug option, parameters checks.
- * @details If enabled then the checks on the API functions input
- *          parameters are activated.
- *
- * @note    The default is @p FALSE.
- */
-#if !defined(CH_DBG_ENABLE_CHECKS)
-#define CH_DBG_ENABLE_CHECKS                FALSE
-#endif
-
-/**
- * @brief   Debug option, consistency checks.
- * @details If enabled then all the assertions in the kernel code are
- *          activated. This includes consistency checks inside the kernel,
- *          runtime anomalies and port-defined checks.
- *
- * @note    The default is @p FALSE.
- */
-#if !defined(CH_DBG_ENABLE_ASSERTS)
-#define CH_DBG_ENABLE_ASSERTS               FALSE
-#endif
-
-/**
- * @brief   Debug option, trace buffer.
- * @details If enabled then the trace buffer is activated.
- *
- * @note    The default is @p CH_DBG_TRACE_MASK_DISABLED.
- */
-#if !defined(CH_DBG_TRACE_MASK)
-#define CH_DBG_TRACE_MASK                   CH_DBG_TRACE_MASK_DISABLED
-#endif
-
-/**
- * @brief   Trace buffer entries.
- * @note    The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is
- *          different from @p CH_DBG_TRACE_MASK_DISABLED.
- */
-#if !defined(CH_DBG_TRACE_BUFFER_SIZE)
-#define CH_DBG_TRACE_BUFFER_SIZE            128
-#endif
-
-/**
- * @brief   Debug option, stack checks.
- * @details If enabled then a runtime stack check is performed.
- *
- * @note    The default is @p FALSE.
- * @note    The stack check is performed in a architecture/port dependent way.
- *          It may not be implemented or some ports.
- * @note    The default failure mode is to halt the system with the global
- *          @p panic_msg variable set to @p NULL.
- */
-#if !defined(CH_DBG_ENABLE_STACK_CHECK)
-#define CH_DBG_ENABLE_STACK_CHECK           FALSE
-#endif
-
-/**
- * @brief   Debug option, stacks initialization.
- * @details If enabled then the threads working area is filled with a byte
- *          value when a thread is created. This can be useful for the
- *          runtime measurement of the used stack.
- *
- * @note    The default is @p FALSE.
- */
-#if !defined(CH_DBG_FILL_THREADS)
-#define CH_DBG_FILL_THREADS                 FALSE
-#endif
-
-/**
- * @brief   Debug option, threads profiling.
- * @details If enabled then a field is added to the @p thread_t structure that
- *          counts the system ticks occurred while executing the thread.
- *
- * @note    The default is @p FALSE.
- * @note    This debug option is not currently compatible with the
- *          tickless mode.
- */
-#if !defined(CH_DBG_THREADS_PROFILING)
-#define CH_DBG_THREADS_PROFILING            FALSE
-#endif
-
-/** @} */
-
-/*===========================================================================*/
-/**
- * @name Kernel hooks
- * @{
- */
-/*===========================================================================*/
-
-/**
- * @brief   System structure extension.
- * @details User fields added to the end of the @p ch_system_t structure.
- */
-#define CH_CFG_SYSTEM_EXTRA_FIELDS                                          \
-  /* Add threads custom fields here.*/
-
-/**
- * @brief   System initialization hook.
- * @details User initialization code added to the @p chSysInit() function
- *          just before interrupts are enabled globally.
- */
-#define CH_CFG_SYSTEM_INIT_HOOK() {                                         \
-  /* Add threads initialization code here.*/                                \
-}
-
-/**
- * @brief   Threads descriptor structure extension.
- * @details User fields added to the end of the @p thread_t structure.
- */
-#define CH_CFG_THREAD_EXTRA_FIELDS                                          \
-  /* Add threads custom fields here.*/
-
-/**
- * @brief   Threads initialization hook.
- * @details User initialization code added to the @p _thread_init() function.
- *
- * @note    It is invoked from within @p _thread_init() and implicitly from all
- *          the threads creation APIs.
- */
-#define CH_CFG_THREAD_INIT_HOOK(tp) {                                       \
-  /* Add threads initialization code here.*/                                \
-}
-
-/**
- * @brief   Threads finalization hook.
- * @details User finalization code added to the @p chThdExit() API.
- */
-#define CH_CFG_THREAD_EXIT_HOOK(tp) {                                       \
-  /* Add threads finalization code here.*/                                  \
-}
-
-/**
- * @brief   Context switch hook.
- * @details This hook is invoked just before switching between threads.
- */
-#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) {                              \
-  /* Context switch code here.*/                                            \
-}
-
-/**
- * @brief   ISR enter hook.
- */
-#define CH_CFG_IRQ_PROLOGUE_HOOK() {                                        \
-  /* IRQ prologue code here.*/                                              \
-}
-
-/**
- * @brief   ISR exit hook.
- */
-#define CH_CFG_IRQ_EPILOGUE_HOOK() {                                        \
-  /* IRQ epilogue code here.*/                                              \
-}
-
-/**
- * @brief   Idle thread enter hook.
- * @note    This hook is invoked within a critical zone, no OS functions
- *          should be invoked from here.
- * @note    This macro can be used to activate a power saving mode.
- */
-#define CH_CFG_IDLE_ENTER_HOOK() {                                          \
-  /* Idle-enter code here.*/                                                \
-}
-
-/**
- * @brief   Idle thread leave hook.
- * @note    This hook is invoked within a critical zone, no OS functions
- *          should be invoked from here.
- * @note    This macro can be used to deactivate a power saving mode.
- */
-#define CH_CFG_IDLE_LEAVE_HOOK() {                                          \
-  /* Idle-leave code here.*/                                                \
-}
-
-/**
- * @brief   Idle Loop hook.
- * @details This hook is continuously invoked by the idle thread loop.
- */
-#define CH_CFG_IDLE_LOOP_HOOK() {                                           \
-  /* Idle loop code here.*/                                                 \
-}
-
-/**
- * @brief   System tick event hook.
- * @details This hook is invoked in the system tick handler immediately
- *          after processing the virtual timers queue.
- */
-#define CH_CFG_SYSTEM_TICK_HOOK() {                                         \
-  /* System tick event code here.*/                                         \
-}
-
-/**
- * @brief   System halt hook.
- * @details This hook is invoked in case to a system halting error before
- *          the system is halted.
- */
-#define CH_CFG_SYSTEM_HALT_HOOK(reason) {                                   \
-  /* System halt code here.*/                                               \
-}
-
-/**
- * @brief   Trace hook.
- * @details This hook is invoked each time a new record is written in the
- *          trace buffer.
- */
-#define CH_CFG_TRACE_HOOK(tep) {                                            \
-  /* Trace code here.*/                                                     \
-}
-
-/** @} */
-
-/*===========================================================================*/
-/* Port-specific settings (override port settings defaulted in chcore.h).    */
-/*===========================================================================*/
-
-#endif  /* CHCONF_H */
-
-/** @} */

keyboards/handwired/riblee_f401/halconf.h

@@ -1,525 +0,0 @@
-/*
-    ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio
-
-    Licensed under the Apache License, Version 2.0 (the "License");
-    you may not use this file except in compliance with the License.
-    You may obtain a copy of the License at
-
-        http://www.apache.org/licenses/LICENSE-2.0
-
-    Unless required by applicable law or agreed to in writing, software
-    distributed under the License is distributed on an "AS IS" BASIS,
-    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-    See the License for the specific language governing permissions and
-    limitations under the License.
-*/
-
-/**
- * @file    templates/halconf.h
- * @brief   HAL configuration header.
- * @details HAL configuration file, this file allows to enable or disable the
- *          various device drivers from your application. You may also use
- *          this file in order to override the device drivers default settings.
- *
- * @addtogroup HAL_CONF
- * @{
- */
-
-#ifndef HALCONF_H
-#define HALCONF_H
-
-#define _CHIBIOS_HAL_CONF_
-#define _CHIBIOS_HAL_CONF_VER_7_0_
-
-#include "mcuconf.h"
-
-/**
- * @brief   Enables the PAL subsystem.
- */
-#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__)
-#define HAL_USE_PAL                         TRUE
-#endif
-
-/**
- * @brief   Enables the ADC subsystem.
- */
-#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__)
-#define HAL_USE_ADC                         FALSE
-#endif
-
-/**
- * @brief   Enables the CAN subsystem.
- */
-#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__)
-#define HAL_USE_CAN                         FALSE
-#endif
-
-/**
- * @brief   Enables the cryptographic subsystem.
- */
-#if !defined(HAL_USE_CRY) || defined(__DOXYGEN__)
-#define HAL_USE_CRY                         FALSE
-#endif
-
-/**
- * @brief   Enables the DAC subsystem.
- */
-#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__)
-#define HAL_USE_DAC                         FALSE
-#endif
-
-/**
- * @brief   Enables the GPT subsystem.
- */
-#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__)
-#define HAL_USE_GPT                         FALSE
-#endif
-
-/**
- * @brief   Enables the I2C subsystem.
- */
-#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__)
-#define HAL_USE_I2C                         FALSE
-#endif
-
-/**
- * @brief   Enables the I2S subsystem.
- */
-#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__)
-#define HAL_USE_I2S                         FALSE
-#endif
-
-/**
- * @brief   Enables the ICU subsystem.
- */
-#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__)
-#define HAL_USE_ICU                         FALSE
-#endif
-
-/**
- * @brief   Enables the MAC subsystem.
- */
-#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__)
-#define HAL_USE_MAC                         FALSE
-#endif
-
-/**
- * @brief   Enables the MMC_SPI subsystem.
- */
-#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__)
-#define HAL_USE_MMC_SPI                     FALSE
-#endif
-
-/**
- * @brief   Enables the PWM subsystem.
- */
-#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__)
-#define HAL_USE_PWM                         FALSE
-#endif
-
-/**
- * @brief   Enables the RTC subsystem.
- */
-#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__)
-#define HAL_USE_RTC                         FALSE
-#endif
-
-/**
- * @brief   Enables the SDC subsystem.
- */
-#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__)
-#define HAL_USE_SDC                         FALSE
-#endif
-
-/**
- * @brief   Enables the SERIAL subsystem.
- */
-#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__)
-#define HAL_USE_SERIAL                      FALSE
-#endif
-
-/**
- * @brief   Enables the SERIAL over USB subsystem.
- */
-#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__)
-#define HAL_USE_SERIAL_USB                  FALSE
-#endif
-
-/**
- * @brief   Enables the SIO subsystem.
- */
-#if !defined(HAL_USE_SIO) || defined(__DOXYGEN__)
-#define HAL_USE_SIO                         FALSE
-#endif
-
-/**
- * @brief   Enables the SPI subsystem.
- */
-#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__)
-#define HAL_USE_SPI                         FALSE
-#endif
-
-/**
- * @brief   Enables the TRNG subsystem.
- */
-#if !defined(HAL_USE_TRNG) || defined(__DOXYGEN__)
-#define HAL_USE_TRNG                        FALSE
-#endif
-
-/**
- * @brief   Enables the UART subsystem.
- */
-#if !defined(HAL_USE_UART) || defined(__DOXYGEN__)
-#define HAL_USE_UART                        FALSE
-#endif
-
-/**
- * @brief   Enables the USB subsystem.
- */
-#if !defined(HAL_USE_USB) || defined(__DOXYGEN__)
-#define HAL_USE_USB                         TRUE
-#endif
-
-/**
- * @brief   Enables the WDG subsystem.
- */
-#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__)
-#define HAL_USE_WDG                         FALSE
-#endif
-
-/**
- * @brief   Enables the WSPI subsystem.
- */
-#if !defined(HAL_USE_WSPI) || defined(__DOXYGEN__)
-#define HAL_USE_WSPI                        FALSE
-#endif
-
-/*===========================================================================*/
-/* PAL driver related settings.                                              */
-/*===========================================================================*/
-
-/**
- * @brief   Enables synchronous APIs.
- * @note    Disabling this option saves both code and data space.
- */
-#if !defined(PAL_USE_CALLBACKS) || defined(__DOXYGEN__)
-#define PAL_USE_CALLBACKS                   FALSE
-#endif
-
-/**
- * @brief   Enables synchronous APIs.
- * @note    Disabling this option saves both code and data space.
- */
-#if !defined(PAL_USE_WAIT) || defined(__DOXYGEN__)
-#define PAL_USE_WAIT                        FALSE
-#endif
-
-/*===========================================================================*/
-/* ADC driver related settings.                                              */
-/*===========================================================================*/
-
-/**
- * @brief   Enables synchronous APIs.
- * @note    Disabling this option saves both code and data space.
- */
-#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__)
-#define ADC_USE_WAIT                        TRUE
-#endif
-
-/**
- * @brief   Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs.
- * @note    Disabling this option saves both code and data space.
- */
-#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
-#define ADC_USE_MUTUAL_EXCLUSION            TRUE
-#endif
-
-/*===========================================================================*/
-/* CAN driver related settings.                                              */
-/*===========================================================================*/
-
-/**
- * @brief   Sleep mode related APIs inclusion switch.
- */
-#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__)
-#define CAN_USE_SLEEP_MODE                  TRUE
-#endif
-
-/**
- * @brief   Enforces the driver to use direct callbacks rather than OSAL events.
- */
-#if !defined(CAN_ENFORCE_USE_CALLBACKS) || defined(__DOXYGEN__)
-#define CAN_ENFORCE_USE_CALLBACKS           FALSE
-#endif
-
-/*===========================================================================*/
-/* CRY driver related settings.                                              */
-/*===========================================================================*/
-
-/**
- * @brief   Enables the SW fall-back of the cryptographic driver.
- * @details When enabled, this option, activates a fall-back software
- *          implementation for algorithms not supported by the underlying
- *          hardware.
- * @note    Fall-back implementations may not be present for all algorithms.
- */
-#if !defined(HAL_CRY_USE_FALLBACK) || defined(__DOXYGEN__)
-#define HAL_CRY_USE_FALLBACK                FALSE
-#endif
-
-/**
- * @brief   Makes the driver forcibly use the fall-back implementations.
- */
-#if !defined(HAL_CRY_ENFORCE_FALLBACK) || defined(__DOXYGEN__)
-#define HAL_CRY_ENFORCE_FALLBACK            FALSE
-#endif
-
-/*===========================================================================*/
-/* DAC driver related settings.                                              */
-/*===========================================================================*/
-
-/**
- * @brief   Enables synchronous APIs.
- * @note    Disabling this option saves both code and data space.
- */
-#if !defined(DAC_USE_WAIT) || defined(__DOXYGEN__)
-#define DAC_USE_WAIT                        TRUE
-#endif
-
-/**
- * @brief   Enables the @p dacAcquireBus() and @p dacReleaseBus() APIs.
- * @note    Disabling this option saves both code and data space.
- */
-#if !defined(DAC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
-#define DAC_USE_MUTUAL_EXCLUSION            TRUE
-#endif
-
-/*===========================================================================*/
-/* I2C driver related settings.                                              */
-/*===========================================================================*/
-
-/**
- * @brief   Enables the mutual exclusion APIs on the I2C bus.
- */
-#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
-#define I2C_USE_MUTUAL_EXCLUSION            TRUE
-#endif
-
-/*===========================================================================*/
-/* MAC driver related settings.                                              */
-/*===========================================================================*/
-
-/**
- * @brief   Enables the zero-copy API.
- */
-#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__)
-#define MAC_USE_ZERO_COPY                   FALSE
-#endif
-
-/**
- * @brief   Enables an event sources for incoming packets.
- */
-#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__)
-#define MAC_USE_EVENTS                      TRUE
-#endif
-
-/*===========================================================================*/
-/* MMC_SPI driver related settings.                                          */
-/*===========================================================================*/
-
-/**
- * @brief   Delays insertions.
- * @details If enabled this options inserts delays into the MMC waiting
- *          routines releasing some extra CPU time for the threads with
- *          lower priority, this may slow down the driver a bit however.
- *          This option is recommended also if the SPI driver does not
- *          use a DMA channel and heavily loads the CPU.
- */
-#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__)
-#define MMC_NICE_WAITING                    TRUE
-#endif
-
-/*===========================================================================*/
-/* SDC driver related settings.                                              */
-/*===========================================================================*/
-
-/**
- * @brief   Number of initialization attempts before rejecting the card.
- * @note    Attempts are performed at 10mS intervals.
- */
-#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__)
-#define SDC_INIT_RETRY                      100
-#endif
-
-/**
- * @brief   Include support for MMC cards.
- * @note    MMC support is not yet implemented so this option must be kept
- *          at @p FALSE.
- */
-#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__)
-#define SDC_MMC_SUPPORT                     FALSE
-#endif
-
-/**
- * @brief   Delays insertions.
- * @details If enabled this options inserts delays into the MMC waiting
- *          routines releasing some extra CPU time for the threads with
- *          lower priority, this may slow down the driver a bit however.
- */
-#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__)
-#define SDC_NICE_WAITING                    TRUE
-#endif
-
-/**
- * @brief   OCR initialization constant for V20 cards.
- */
-#if !defined(SDC_INIT_OCR_V20) || defined(__DOXYGEN__)
-#define SDC_INIT_OCR_V20                    0x50FF8000U
-#endif
-
-/**
- * @brief   OCR initialization constant for non-V20 cards.
- */
-#if !defined(SDC_INIT_OCR) || defined(__DOXYGEN__)
-#define SDC_INIT_OCR                        0x80100000U
-#endif
-
-/*===========================================================================*/
-/* SERIAL driver related settings.                                           */
-/*===========================================================================*/
-
-/**
- * @brief   Default bit rate.
- * @details Configuration parameter, this is the baud rate selected for the
- *          default configuration.
- */
-#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__)
-#define SERIAL_DEFAULT_BITRATE              38400
-#endif
-
-/**
- * @brief   Serial buffers size.
- * @details Configuration parameter, you can change the depth of the queue
- *          buffers depending on the requirements of your application.
- * @note    The default is 16 bytes for both the transmission and receive
- *          buffers.
- */
-#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__)
-#define SERIAL_BUFFERS_SIZE                 16
-#endif
-
-/*===========================================================================*/
-/* SERIAL_USB driver related setting.                                        */
-/*===========================================================================*/
-
-/**
- * @brief   Serial over USB buffers size.
- * @details Configuration parameter, the buffer size must be a multiple of
- *          the USB data endpoint maximum packet size.
- * @note    The default is 256 bytes for both the transmission and receive
- *          buffers.
- */
-#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__)
-#define SERIAL_USB_BUFFERS_SIZE             256
-#endif
-
-/**
- * @brief   Serial over USB number of buffers.
- * @note    The default is 2 buffers.
- */
-#if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__)
-#define SERIAL_USB_BUFFERS_NUMBER           2
-#endif
-
-/*===========================================================================*/
-/* SPI driver related settings.                                              */
-/*===========================================================================*/
-
-/**
- * @brief   Enables synchronous APIs.
- * @note    Disabling this option saves both code and data space.
- */
-#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__)
-#define SPI_USE_WAIT                        TRUE
-#endif
-
-/**
- * @brief   Enables circular transfers APIs.
- * @note    Disabling this option saves both code and data space.
- */
-#if !defined(SPI_USE_CIRCULAR) || defined(__DOXYGEN__)
-#define SPI_USE_CIRCULAR                    FALSE
-#endif
-
-
-/**
- * @brief   Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs.
- * @note    Disabling this option saves both code and data space.
- */
-#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
-#define SPI_USE_MUTUAL_EXCLUSION            TRUE
-#endif
-
-/**
- * @brief   Handling method for SPI CS line.
- * @note    Disabling this option saves both code and data space.
- */
-#if !defined(SPI_SELECT_MODE) || defined(__DOXYGEN__)
-#define SPI_SELECT_MODE                     SPI_SELECT_MODE_PAD
-#endif
-
-/*===========================================================================*/
-/* UART driver related settings.                                             */
-/*===========================================================================*/
-
-/**
- * @brief   Enables synchronous APIs.
- * @note    Disabling this option saves both code and data space.
- */
-#if !defined(UART_USE_WAIT) || defined(__DOXYGEN__)
-#define UART_USE_WAIT                       FALSE
-#endif
-
-/**
- * @brief   Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs.
- * @note    Disabling this option saves both code and data space.
- */
-#if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
-#define UART_USE_MUTUAL_EXCLUSION           FALSE
-#endif
-
-/*===========================================================================*/
-/* USB driver related settings.                                              */
-/*===========================================================================*/
-
-/**
- * @brief   Enables synchronous APIs.
- * @note    Disabling this option saves both code and data space.
- */
-#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__)
-#define USB_USE_WAIT                        TRUE
-#endif
-
-/*===========================================================================*/
-/* WSPI driver related settings.                                             */
-/*===========================================================================*/
-
-/**
- * @brief   Enables synchronous APIs.
- * @note    Disabling this option saves both code and data space.
- */
-#if !defined(WSPI_USE_WAIT) || defined(__DOXYGEN__)
-#define WSPI_USE_WAIT                       TRUE
-#endif
-
-/**
- * @brief   Enables the @p wspiAcquireBus() and @p wspiReleaseBus() APIs.
- * @note    Disabling this option saves both code and data space.
- */
-#if !defined(WSPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
-#define WSPI_USE_MUTUAL_EXCLUSION           TRUE
-#endif
-
-#endif /* HALCONF_H */
-
-/** @} */

keyboards/handwired/riblee_f401/mcuconf.h

@@ -1,253 +0,0 @@
-/*
-    ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio
-
-    Licensed under the Apache License, Version 2.0 (the "License");
-    you may not use this file except in compliance with the License.
-    You may obtain a copy of the License at
-
-        http://www.apache.org/licenses/LICENSE-2.0
-
-    Unless required by applicable law or agreed to in writing, software
-    distributed under the License is distributed on an "AS IS" BASIS,
-    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-    See the License for the specific language governing permissions and
-    limitations under the License.
-*/
-
-#ifndef MCUCONF_H
-#define MCUCONF_H
-
-/*
- * STM32F4xx drivers configuration.
- * The following settings override the default settings present in
- * the various device driver implementation headers.
- * Note that the settings for each driver only have effect if the whole
- * driver is enabled in halconf.h.
- *
- * IRQ priorities:
- * 15...0       Lowest...Highest.
- *
- * DMA priorities:
- * 0...3        Lowest...Highest.
- */
-
-#define STM32F4xx_MCUCONF
-
-/*
- * HAL driver system settings.
- */
-#define STM32_NO_INIT                       FALSE
-#define STM32_HSI_ENABLED                   TRUE
-#define STM32_LSI_ENABLED                   TRUE
-#define STM32_HSE_ENABLED                   TRUE
-#define STM32_LSE_ENABLED                   FALSE
-#define STM32_CLOCK48_REQUIRED              TRUE
-#define STM32_SW                            STM32_SW_PLL
-#define STM32_PLLSRC                        STM32_PLLSRC_HSE
-#define STM32_PLLM_VALUE                    25       
-#define STM32_PLLN_VALUE                    336     
-#define STM32_PLLP_VALUE                    4       
-#define STM32_PLLQ_VALUE                    7       
-#define STM32_HPRE                          STM32_HPRE_DIV1  
-#define STM32_PPRE1                         STM32_PPRE1_DIV4  
-#define STM32_PPRE2                         STM32_PPRE2_DIV2 
-#define STM32_RTCSEL                        STM32_RTCSEL_LSI
-#define STM32_RTCPRE_VALUE                  8
-#define STM32_MCO1SEL                       STM32_MCO1SEL_HSI
-#define STM32_MCO1PRE                       STM32_MCO1PRE_DIV1
-#define STM32_MCO2SEL                       STM32_MCO2SEL_SYSCLK
-#define STM32_MCO2PRE                       STM32_MCO2PRE_DIV5
-#define STM32_I2SSRC                        STM32_I2SSRC_CKIN
-#define STM32_PLLI2SN_VALUE                 192
-#define STM32_PLLI2SR_VALUE                 5
-#define STM32_PVD_ENABLE                    FALSE
-#define STM32_PLS                           STM32_PLS_LEV0
-#define STM32_BKPRAM_ENABLE                 FALSE
-
-/*
- * IRQ system settings.
- */
-#define STM32_IRQ_EXTI0_PRIORITY            6
-#define STM32_IRQ_EXTI1_PRIORITY            6
-#define STM32_IRQ_EXTI2_PRIORITY            6
-#define STM32_IRQ_EXTI3_PRIORITY            6
-#define STM32_IRQ_EXTI4_PRIORITY            6
-#define STM32_IRQ_EXTI5_9_PRIORITY          6
-#define STM32_IRQ_EXTI10_15_PRIORITY        6
-#define STM32_IRQ_EXTI16_PRIORITY           6
-#define STM32_IRQ_EXTI17_PRIORITY           15
-#define STM32_IRQ_EXTI18_PRIORITY           6
-#define STM32_IRQ_EXTI19_PRIORITY           6
-#define STM32_IRQ_EXTI20_PRIORITY           6
-#define STM32_IRQ_EXTI21_PRIORITY           15
-#define STM32_IRQ_EXTI22_PRIORITY           15
-
-/*
- * ADC driver system settings.
- */
-#define STM32_ADC_ADCPRE                    ADC_CCR_ADCPRE_DIV4
-#define STM32_ADC_USE_ADC1                  FALSE
-#define STM32_ADC_ADC1_DMA_STREAM           STM32_DMA_STREAM_ID(2, 4)
-#define STM32_ADC_ADC1_DMA_PRIORITY         2
-#define STM32_ADC_IRQ_PRIORITY              6
-#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY     6
-
-/*
- * GPT driver system settings.
- */
-#define STM32_GPT_USE_TIM1                  FALSE
-#define STM32_GPT_USE_TIM2                  FALSE
-#define STM32_GPT_USE_TIM3                  FALSE
-#define STM32_GPT_USE_TIM4                  FALSE
-#define STM32_GPT_USE_TIM5                  FALSE
-#define STM32_GPT_USE_TIM9                  FALSE
-#define STM32_GPT_USE_TIM11                 FALSE
-#define STM32_GPT_TIM1_IRQ_PRIORITY         7
-#define STM32_GPT_TIM2_IRQ_PRIORITY         7
-#define STM32_GPT_TIM3_IRQ_PRIORITY         7
-#define STM32_GPT_TIM4_IRQ_PRIORITY         7
-#define STM32_GPT_TIM5_IRQ_PRIORITY         7
-#define STM32_GPT_TIM9_IRQ_PRIORITY         7
-#define STM32_GPT_TIM11_IRQ_PRIORITY        7
-
-/*
- * I2C driver system settings.
- */
-#define STM32_I2C_USE_I2C1                  FALSE
-#define STM32_I2C_USE_I2C2                  FALSE
-#define STM32_I2C_USE_I2C3                  FALSE
-#define STM32_I2C_BUSY_TIMEOUT              50
-#define STM32_I2C_I2C1_RX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 0)
-#define STM32_I2C_I2C1_TX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 6)
-#define STM32_I2C_I2C2_RX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 2)
-#define STM32_I2C_I2C2_TX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 7)
-#define STM32_I2C_I2C3_RX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 2)
-#define STM32_I2C_I2C3_TX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 4)
-#define STM32_I2C_I2C1_IRQ_PRIORITY         5
-#define STM32_I2C_I2C2_IRQ_PRIORITY         5
-#define STM32_I2C_I2C3_IRQ_PRIORITY         5
-#define STM32_I2C_I2C1_DMA_PRIORITY         3
-#define STM32_I2C_I2C2_DMA_PRIORITY         3
-#define STM32_I2C_I2C3_DMA_PRIORITY         3
-#define STM32_I2C_DMA_ERROR_HOOK(i2cp)      osalSysHalt("DMA failure")
-
-/*
- * I2S driver system settings.
- */
-#define STM32_I2S_USE_SPI2                  FALSE
-#define STM32_I2S_USE_SPI3                  FALSE
-#define STM32_I2S_SPI2_IRQ_PRIORITY         10
-#define STM32_I2S_SPI3_IRQ_PRIORITY         10
-#define STM32_I2S_SPI2_DMA_PRIORITY         1
-#define STM32_I2S_SPI3_DMA_PRIORITY         1
-#define STM32_I2S_SPI2_RX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 3)
-#define STM32_I2S_SPI2_TX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 4)
-#define STM32_I2S_SPI3_RX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 0)
-#define STM32_I2S_SPI3_TX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 7)
-#define STM32_I2S_DMA_ERROR_HOOK(i2sp)      osalSysHalt("DMA failure")
-
-/*
- * ICU driver system settings.
- */
-#define STM32_ICU_USE_TIM1                  FALSE
-#define STM32_ICU_USE_TIM2                  FALSE
-#define STM32_ICU_USE_TIM3                  FALSE
-#define STM32_ICU_USE_TIM4                  FALSE
-#define STM32_ICU_USE_TIM5                  FALSE
-#define STM32_ICU_USE_TIM9                  FALSE
-#define STM32_ICU_TIM1_IRQ_PRIORITY         7
-#define STM32_ICU_TIM2_IRQ_PRIORITY         7
-#define STM32_ICU_TIM3_IRQ_PRIORITY         7
-#define STM32_ICU_TIM4_IRQ_PRIORITY         7
-#define STM32_ICU_TIM5_IRQ_PRIORITY         7
-#define STM32_ICU_TIM9_IRQ_PRIORITY         7
-
-/*
- * PWM driver system settings.
- */
-#define STM32_PWM_USE_ADVANCED              FALSE
-#define STM32_PWM_USE_TIM1                  FALSE
-#define STM32_PWM_USE_TIM2                  FALSE
-#define STM32_PWM_USE_TIM3                  FALSE
-#define STM32_PWM_USE_TIM4                  FALSE
-#define STM32_PWM_USE_TIM5                  FALSE
-#define STM32_PWM_USE_TIM9                  FALSE
-#define STM32_PWM_TIM1_IRQ_PRIORITY         7
-#define STM32_PWM_TIM2_IRQ_PRIORITY         7
-#define STM32_PWM_TIM3_IRQ_PRIORITY         7
-#define STM32_PWM_TIM4_IRQ_PRIORITY         7
-#define STM32_PWM_TIM5_IRQ_PRIORITY         7
-#define STM32_PWM_TIM9_IRQ_PRIORITY         7
-
-/*
- * SERIAL driver system settings.
- */
-#define STM32_SERIAL_USE_USART1             FALSE
-#define STM32_SERIAL_USE_USART2             FALSE
-#define STM32_SERIAL_USE_USART6             FALSE
-#define STM32_SERIAL_USART1_PRIORITY        12
-#define STM32_SERIAL_USART2_PRIORITY        12
-#define STM32_SERIAL_USART6_PRIORITY        12
-
-/*
- * SPI driver system settings.
- */
-#define STM32_SPI_USE_SPI1                  FALSE
-#define STM32_SPI_USE_SPI2                  FALSE
-#define STM32_SPI_USE_SPI3                  FALSE
-#define STM32_SPI_SPI1_RX_DMA_STREAM        STM32_DMA_STREAM_ID(2, 0)
-#define STM32_SPI_SPI1_TX_DMA_STREAM        STM32_DMA_STREAM_ID(2, 3)
-#define STM32_SPI_SPI2_RX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 3)
-#define STM32_SPI_SPI2_TX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 4)
-#define STM32_SPI_SPI3_RX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 0)
-#define STM32_SPI_SPI3_TX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 7)
-#define STM32_SPI_SPI1_DMA_PRIORITY         1
-#define STM32_SPI_SPI2_DMA_PRIORITY         1
-#define STM32_SPI_SPI3_DMA_PRIORITY         1
-#define STM32_SPI_SPI1_IRQ_PRIORITY         10
-#define STM32_SPI_SPI2_IRQ_PRIORITY         10
-#define STM32_SPI_SPI3_IRQ_PRIORITY         10
-#define STM32_SPI_DMA_ERROR_HOOK(spip)      osalSysHalt("DMA failure")
-
-/*
- * ST driver system settings.
- */
-#define STM32_ST_IRQ_PRIORITY               8
-#define STM32_ST_USE_TIMER                  2
-
-/*
- * UART driver system settings.
- */
-#define STM32_UART_USE_USART1               FALSE
-#define STM32_UART_USE_USART2               FALSE
-#define STM32_UART_USE_USART6               FALSE
-#define STM32_UART_USART1_RX_DMA_STREAM     STM32_DMA_STREAM_ID(2, 5)
-#define STM32_UART_USART1_TX_DMA_STREAM     STM32_DMA_STREAM_ID(2, 7)
-#define STM32_UART_USART2_RX_DMA_STREAM     STM32_DMA_STREAM_ID(1, 5)
-#define STM32_UART_USART2_TX_DMA_STREAM     STM32_DMA_STREAM_ID(1, 6)
-#define STM32_UART_USART6_RX_DMA_STREAM     STM32_DMA_STREAM_ID(2, 2)
-#define STM32_UART_USART6_TX_DMA_STREAM     STM32_DMA_STREAM_ID(2, 7)
-#define STM32_UART_USART1_IRQ_PRIORITY      12
-#define STM32_UART_USART2_IRQ_PRIORITY      12
-#define STM32_UART_USART6_IRQ_PRIORITY      12
-#define STM32_UART_USART1_DMA_PRIORITY      0
-#define STM32_UART_USART2_DMA_PRIORITY      0
-#define STM32_UART_USART6_DMA_PRIORITY      0
-#define STM32_UART_DMA_ERROR_HOOK(uartp)    osalSysHalt("DMA failure")
-
-/*
- * USB driver system settings.
- */
-#define STM32_USB_USE_OTG1                  TRUE
-#define STM32_USB_OTG1_IRQ_PRIORITY         14
-#define STM32_USB_OTG1_RX_FIFO_SIZE         512
-#define STM32_USB_OTG_THREAD_PRIO           NORMALPRIO+1
-#define STM32_USB_OTG_THREAD_STACK_SIZE     128
-#define STM32_USB_OTGFIFO_FILL_BASEPRI      0
-
-/*
- * WDG driver system settings.
- */
-#define STM32_WDG_USE_IWDG                  FALSE
-
-#endif /* MCUCONF_H */

keyboards/kbdfans/bella/soldered/keymaps/default/keymap.c

@@ -22,8 +22,8 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 		KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_GRV, KC_BSPC, KC_INS, 
 		KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, 
 		KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_PGDN, 
-		KC_LSFT, KC_BSLS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, 
-		KC_LCTL, KC_LALT, KC_LALT, KC_SPC, KC_RALT, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT),
+		KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, 
+		KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT),
 
 	LAYOUT_all(
 		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, 

keyboards/kbdfans/bella/soldered/keymaps/via/keymap.c

@@ -22,8 +22,8 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 		KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_GRV, KC_BSPC, KC_INS, 
 		KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, 
 		KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_PGDN, 
-		KC_LSFT, KC_BSLS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, 
-		KC_LCTL, KC_LALT, KC_LALT, KC_SPC, KC_RALT, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT),
+		KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, 
+		KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT),
 
 	LAYOUT_all(
 		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, 

keyboards/kbdfans/bella/soldered/soldered.h

@@ -23,12 +23,12 @@
 	K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213,       K215, \
 	K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311,       K313,       K315, \
 	K400, K401, K402, K403, K404, K405, K406, K407, K408, K409, K410, K411, K412,       K414,       \
-	K500, K501, K502,                   K506,                   K510, K511,       K513, K514, K515  \
+	K500, K501, K502,                   K506,                   K510, K511, K512,       K514, K515  \
 ) { \
 	{ K000,  KC_NO, K002,  K003,  K004,  K005,  K006,  K007,  K008,  K009,  KC_NO, K011,  K012,  K013,  K014,  K015 }, \
 	{ K100,  K101,  K102,  K103,  K104,  K105,  K106,  K107,  K108,  K109,  K110,  K111,  K112,  K113,  K114,  K115 }, \
 	{ K200,  K201,  K202,  K203,  K204,  K205,  K206,  K207,  K208,  K209,  K210,  K211,  K212,  K213,  KC_NO, K215 }, \
 	{ K300,  K301,  K302,  K303,  K304,  K305,  K306,  K307,  K308,  K309,  K310,  K311,  KC_NO, K313,  KC_NO, K315 }, \
 	{ K400,  K401,  K402,  K403,  K404,  K405,  K406,  K407,  K408,  K409,  K410,  K411,  K412,  KC_NO, K414,  KC_NO }, \
-	{ K500,  K501,  K502,  KC_NO, KC_NO, KC_NO, K506,  KC_NO, KC_NO, KC_NO, K510,  K511,  KC_NO, K513,  K514,  K515 }  \
+	{ K500,  K501,  K502,  KC_NO, KC_NO, KC_NO, K506,  KC_NO, KC_NO, KC_NO, K510,  K511,  K512,  KC_NO, K514,  K515 }  \
 }

keyboards/kbdfans/maja/maja.c

@@ -102,3 +102,12 @@ void suspend_wakeup_init_kb(void) {
     rgb_matrix_set_suspend_state(false);
     suspend_wakeup_init_user();
 }
+
+__attribute__ ((weak))
+void rgb_matrix_indicators_user(void)
+{
+    if (host_keyboard_led_state().caps_lock)
+    {
+        rgb_matrix_set_color(30, 0xFF, 0xFF, 0xFF);
+    }
+}

keyboards/keyboardio/atreus/atreus.c

@@ -0,0 +1,17 @@
+/* Copyright (C) 2019, 2020  Keyboard.io, Inc
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include "atreus.h"

keyboards/keyboardio/atreus/atreus.h

@@ -0,0 +1,32 @@
+/* Copyright (C) 2019, 2020  Keyboard.io, Inc
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#pragma once
+
+#include "quantum.h"
+#define XXX KC_NO
+
+#define LAYOUT(                                                  \
+  k00, k01, k02, k03, k04,           k05, k06, k07, k08, k09,    \
+  k10, k11, k12, k13, k14,           k15, k16, k17, k18, k19,    \
+  k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b,    \
+  k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b     \
+)                                                                \
+{                                                                \
+ { k00, k01, k02, k03, k04, XXX, XXX, k05, k06, k07, k08, k09 }, \
+ { k10, k11, k12, k13, k14, XXX, XXX, k15, k16, k17, k18, k19 }, \
+ { k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b }, \
+ { k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b }  \
+}

keyboards/keyboardio/atreus/config.h

@@ -0,0 +1,81 @@
+/* Copyright (C) 2019, 2020  Keyboard.io, Inc
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+
+#define VENDOR_ID       0x1209
+#define PRODUCT_ID      0x2303
+#define DEVICE_VER      0x0000
+#define MANUFACTURER    Keyboardio
+#define PRODUCT         Atreus
+
+/* key matrix size */
+#define MATRIX_ROWS 4
+#define MATRIX_COLS 12
+
+/* define if matrix has ghost */
+//#define MATRIX_HAS_GHOST
+
+/* number of backlight levels */
+//#define BACKLIGHT_LEVELS 3
+
+/* Set 0 if debouncing isn't needed */
+#define DEBOUNCE 5
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/*
+ * Keyboard Matrix Assignments
+ *
+ * Change this to how you wired your keyboard
+ * COLS: AVR pins used for columns, left to right
+ * ROWS: AVR pins used for rows, top to bottom
+ * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
+ *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
+ *
+ */
+
+#define MATRIX_ROW_PINS { F6, F5, F4, F1 }
+#define MATRIX_COL_PINS { F7, E2, C7, C6, B6, B5, D7, D6, D4, D5, D3, D2 }
+#define UNUSED_PINS
+
+/* COL2ROW, ROW2COL*/
+#define DIODE_DIRECTION COL2ROW
+
+/*
+ * Feature disable options
+ *  These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+//#define NO_DEBUG
+
+/* disable print */
+//#define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+//#define NO_ACTION_MACRO
+//#define NO_ACTION_FUNCTION

keyboards/keyboardio/atreus/info.json

@@ -0,0 +1,57 @@
+{
+    "keyboard_name": "Keyboardio Atreus",
+    "url": "",
+    "maintainer": "keyboardio",
+    "width": 13,
+    "height": 4.7,
+    "layouts": {
+        "LAYOUT": {
+            "layout": [
+                {"label":"Q", "x":0, "y":0.6},
+                {"label":"W", "x":1, "y":0.35},
+                {"label":"E", "x":2, "y":0},
+                {"label":"R", "x":3, "y":0.35},
+                {"label":"T", "x":4, "y":0.7},
+                {"label":"Y", "x":8, "y":0.7},
+                {"label":"U", "x":9, "y":0.35},
+                {"label":"I", "x":10, "y":0},
+                {"label":"O", "x":11, "y":0.35},
+                {"label":"P", "x":12, "y":0.6},
+                {"label":"A", "x":0, "y":1.6},
+                {"label":"S", "x":1, "y":1.35},
+                {"label":"D", "x":2, "y":1},
+                {"label":"F", "x":3, "y":1.35},
+                {"label":"G", "x":4, "y":1.7},
+                {"label":"H", "x":8, "y":1.7},
+                {"label":"J", "x":9, "y":1.35},
+                {"label":"K", "x":10, "y":1},
+                {"label":"L", "x":11, "y":1.35},
+                {"label":";", "x":12, "y":1.6},
+                {"label":"Z", "x":0, "y":2.6},
+                {"label":"X", "x":1, "y":2.35},
+                {"label":"C", "x":2, "y":2},
+                {"label":"V", "x":3, "y":2.35},
+                {"label":"B", "x":4, "y":2.7},
+                {"label":"`", "x":5, "y":2.54},
+                {"label":"\\", "x":7, "y":2.54},
+                {"label":"N", "x":8, "y":2.7},
+                {"label":"M", "x":9, "y":2.35},
+                {"label":",", "x":10, "y":2},
+                {"label":".", "x":11, "y":2.35},
+                {"label":"/", "x":12, "y":2.6},
+                {"label":"Esc", "x":0, "y":3.6},
+                {"label":"Tab", "x":1, "y":3.35},
+                {"label":"Super", "x":2, "y":3},
+                {"label":"Shift", "x":3, "y":3.35},
+                {"label":"Bksp", "x":4, "y":3.7},
+                {"label":"Ctrl", "x":5, "y":3.54},
+                {"label":"Alt", "x":7, "y":3.54},
+                {"label":"Space", "x":8, "y":3.7},
+                {"label":"Fun", "x":9, "y":3.35},
+                {"label":"-", "x":10, "y":3},
+                {"label":"'", "x":11, "y":3.35},
+                {"label":"Enter", "x":12,"y":3.6}
+            ]
+        }
+    }
+}

keyboards/keyboardio/atreus/keymaps/default/keymap.c

@@ -0,0 +1,43 @@
+// Copyright (C) 2019, 2020  Keyboard.io, Inc
+//
+// this is the style you want to emulate.
+// This is the canonical layout file for the Quantum project. If you want to add another keyboard,
+
+#include QMK_KEYBOARD_H
+
+enum layer_names {
+    _QW,
+    _RS,
+    _LW,
+};
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+  [_QW] = LAYOUT( /* Qwerty */
+    KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,                      KC_Y,    KC_U,    KC_I,    KC_O,    KC_P    ,
+    KC_A,    KC_S,    KC_D,    KC_F,    KC_G,                      KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN ,
+    KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_GRV,  KC_BSLS, KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH ,
+    KC_ESC, KC_TAB, KC_LGUI,  KC_LSFT, KC_BSPC,  KC_LCTL, KC_LALT, KC_SPC,  MO(_RS), KC_MINS, KC_QUOT, KC_ENT ),
+
+  /*
+   *  !       @     up     {    }        ||     pgup    7     8     9    *
+   *  #     left   down  right  $        ||     pgdn    4     5     6    +
+   *  [       ]      (     )    &        ||       `     1     2     3    \
+   * lower  insert super shift bksp ctrl || alt space   fn    .     0    =
+   */
+  [_RS] = LAYOUT( /* [> RAISE <] */
+    KC_EXLM, KC_AT,   KC_UP,   KC_DLR,  KC_PERC,                  KC_PGUP, KC_7,    KC_8,   KC_9, KC_BSPC,
+    KC_LPRN, KC_LEFT, KC_DOWN, KC_RGHT, KC_RPRN,                  KC_PGDN, KC_4,    KC_5,   KC_6, KC_BSLS,
+    KC_LBRC, KC_RBRC, KC_HASH, KC_LCBR, KC_RCBR, KC_CIRC, KC_AMPR,KC_ASTR, KC_1,    KC_2,   KC_3, KC_PLUS,
+    TG(_LW), KC_INS,  KC_LGUI, KC_LSFT, KC_BSPC, KC_LCTL, KC_LALT,KC_SPC,  KC_TRNS, KC_DOT, KC_0, KC_EQL ),
+  /*
+   * insert home   up  end   pgup       ||      up     F7    F8    F9   F10
+   *  del   left  down right pgdn       ||     down    F4    F5    F6   F11
+   *       volup             reset      ||             F1    F2    F3   F12
+   *       voldn  super shift bksp ctrl || alt space   L0  prtsc scroll pause
+   */
+  [_LW] = LAYOUT( /* [> LOWER <] */
+    KC_INS,  KC_HOME, KC_UP,   KC_END,  KC_PGUP,                   KC_UP,   KC_F7,   KC_F8,   KC_F9,   KC_F10  ,
+    KC_DEL,  KC_LEFT, KC_DOWN, KC_RGHT, KC_PGDN,                   KC_DOWN, KC_F4,   KC_F5,   KC_F6,   KC_F11  ,
+    KC_NO,   KC_VOLU, KC_NO,   KC_NO,   RESET,   _______, _______, KC_NO,   KC_F1,   KC_F2,   KC_F3,   KC_F12  ,
+    KC_NO,   KC_VOLD, KC_LGUI, KC_LSFT, KC_BSPC, KC_LCTL, KC_LALT, KC_SPC,  TO(_QW), KC_PSCR, KC_SLCK, KC_PAUS )
+};

keyboards/keyboardio/atreus/readme.md

@@ -0,0 +1,31 @@
+# Keyboardio Atreus
+
+![Atreus](https://atreus.technomancy.us/i/atreus2-mug.jpg)
+
+A small mechanical keyboard that is based around the shape of the human hand.
+
+* Keyboard Maintainer: [Keyboardio](https://github.com/keyboardio)
+* Hardware Supported: Keyboardio Atreus
+* Hardware Availability: https://www.kickstarter.com/projects/keyboardio/atreus
+
+These configuration files are specifically for the Keyboardio Atreus, a
+collaboration between [Phil Hagelberg](https://github.com/technomancy) and
+[Keyboardio](https://github.com/keyboardio). The keyboard is currently on
+Kickstarter, and will come fully assembled.
+
+Make example for this keyboard (after setting up your build environment):
+
+    make keyboardio/atreus:default
+
+Flashing example for this keyboard:
+
+    make keyboardio/atreus:default:flash
+
+*Unlike the TMK firmware, these commands should be run from the root of the repository, not the directory containing this readme.*
+
+To flash new firmware, the keyboard needs to be in bootloader mode. To do that,
+one needs to hold the bottom left key (`Esc` by default) and reset the
+keyboard - either via a macro, or by sending a hang-up signal to the keyboard
+device, or by pressing the reset button on the bottom with a pin.
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

keyboards/keyboardio/atreus/rules.mk

@@ -0,0 +1,24 @@
+# MCU name
+MCU = atmega32u4
+
+# Bootloader selection
+BOOTLOADER = caterina
+
+# Build Options
+#   change yes to no to disable
+#
+BOOTMAGIC_ENABLE = lite     # Virtual DIP switch configuration
+MOUSEKEY_ENABLE = yes       # Mouse keys
+EXTRAKEY_ENABLE = yes       # Audio control and System control
+CONSOLE_ENABLE = yes        # Console for debug
+COMMAND_ENABLE = yes        # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = yes           # USB Nkey Rollover
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
+RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
+BLUETOOTH_ENABLE = no       # Enable Bluetooth
+AUDIO_ENABLE = no           # Audio output
+
+UNICODE_ENABLE = yes        # Unicode

keyboards/lfkeyboards/smk65/info.json

@@ -5,14 +5,11 @@
   "width": 16,
   "height": 5,
   "layouts": {
-    "LAYOUT": {
-      "key_count": 68,
+    "LAYOUT_65_ansi": {
       "layout": [{"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":4, "y":0}, {"x":5, "y":0}, {"x":6, "y":0}, {"x":7, "y":0}, {"x":8, "y":0}, {"x":9, "y":0}, {"x":10, "y":0}, {"x":11, "y":0}, {"x":12, "y":0}, {"x":13, "y":0, "w":2}, {"x":15, "y":0}, {"x":0, "y":1, "w":1.5}, {"x":1.5, "y":1}, {"x":2.5, "y":1}, {"x":3.5, "y":1}, {"x":4.5, "y":1}, {"x":5.5, "y":1}, {"x":6.5, "y":1}, {"x":7.5, "y":1}, {"x":8.5, "y":1}, {"x":9.5, "y":1}, {"x":10.5, "y":1}, {"x":11.5, "y":1}, {"x":12.5, "y":1}, {"x":13.5, "y":1, "w":1.5}, {"x":15, "y":1}, {"x":0, "y":2, "w":1.75}, {"x":1.75, "y":2}, {"x":2.75, "y":2}, {"x":3.75, "y":2}, {"x":4.75, "y":2}, {"x":5.75, "y":2}, {"x":6.75, "y":2}, {"x":7.75, "y":2}, {"x":8.75, "y":2}, {"x":9.75, "y":2}, {"x":10.75, "y":2}, {"x":11.75, "y":2}, {"x":12.75, "y":2, "w":2.25}, {"x":15, "y":2}, {"x":0, "y":3, "w":2.25}, {"x":2.25, "y":3}, {"x":3.25, "y":3}, {"x":4.25, "y":3}, {"x":5.25, "y":3}, {"x":6.25, "y":3}, {"x":7.25, "y":3}, {"x":8.25, "y":3}, {"x":9.25, "y":3}, {"x":10.25, "y":3}, {"x":11.25, "y":3}, {"x":12.25, "y":3, "w":1.75}, {"x":14, "y":3}, {"x":15, "y":3}, {"x":0, "y":4, "w":1.25}, {"x":1.25, "y":4, "w":1.25}, {"x":2.5, "y":4, "w":1.25}, {"x":3.75, "y":4, "w":6.25}, {"x":10, "y":4}, {"x":11, "y":4}, {"x":12, "y":4}, {"x":13, "y":4}, {"x":14, "y":4}, {"x":15, "y":4}]
     },
-
-    "LAYOUT_iso": {
-      "key_count": 69,
-      "layout": [{"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":4, "y":0}, {"x":5, "y":0}, {"x":6, "y":0}, {"x":7, "y":0}, {"x":8, "y":0}, {"x":9, "y":0}, {"x":10, "y":0}, {"x":11, "y":0}, {"x":12, "y":0}, {"x":13, "y":0, "w":2}, {"x":15, "y":0}, {"x":0, "y":1, "w":1.5}, {"x":1.5, "y":1}, {"x":2.5, "y":1}, {"x":3.5, "y":1}, {"x":4.5, "y":1}, {"x":5.5, "y":1}, {"x":6.5, "y":1}, {"x":7.5, "y":1}, {"x":8.5, "y":1}, {"x":9.5, "y":1}, {"x":10.5, "y":1}, {"x":11.5, "y":1}, {"x":12.5, "y":1}, {"x":13.75, "y":1, "w":1.25, "h":2}, {"x":15, "y":1}, {"x":0, "y":2, "w":1.75}, {"x":1.75, "y":2}, {"x":2.75, "y":2}, {"x":3.75, "y":2}, {"x":4.75, "y":2}, {"x":5.75, "y":2}, {"x":6.75, "y":2}, {"x":7.75, "y":2}, {"x":8.75, "y":2}, {"x":9.75, "y":2}, {"x":10.75, "y":2}, {"x":11.75, "y":2}, {"x":12.75, "y":2}, {"x":15, "y":2}, {"x":0, "y":3, "w":1.25}, {"x":1.25, "y":3}, {"x":2.25, "y":3}, {"x":3.25, "y":3}, {"x":4.25, "y":3}, {"x":5.25, "y":3}, {"x":6.25, "y":3}, {"x":7.25, "y":3}, {"x":8.25, "y":3}, {"x":9.25, "y":3}, {"x":10.25, "y":3}, {"x":11.25, "y":3}, {"x":12.25, "y":3, "w":1.75}, {"x":14, "y":3}, {"x":15, "y":3}, {"x":0, "y":4, "w":1.25}, {"x":1.25, "y":4, "w":1.25}, {"x":2.5, "y":4, "w":1.25}, {"x":3.75, "y":4, "w":6.25}, {"x":10, "y":4}, {"x":11, "y":4}, {"x":12, "y":4}, {"x":13, "y":4}, {"x":14, "y":4}, {"x":15, "y":4}]
+    "LAYOUT_65_iso": {
+      "layout": [{"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":4, "y":0}, {"x":5, "y":0}, {"x":6, "y":0}, {"x":7, "y":0}, {"x":8, "y":0}, {"x":9, "y":0}, {"x":10, "y":0}, {"x":11, "y":0}, {"x":12, "y":0}, {"x":13, "y":0, "w":2}, {"x":15, "y":0}, {"x":0, "y":1, "w":1.5}, {"x":1.5, "y":1}, {"x":2.5, "y":1}, {"x":3.5, "y":1}, {"x":4.5, "y":1}, {"x":5.5, "y":1}, {"x":6.5, "y":1}, {"x":7.5, "y":1}, {"x":8.5, "y":1}, {"x":9.5, "y":1}, {"x":10.5, "y":1}, {"x":11.5, "y":1}, {"x":12.5, "y":1}, {"x":15, "y":1}, {"x":0, "y":2, "w":1.75}, {"x":1.75, "y":2}, {"x":2.75, "y":2}, {"x":3.75, "y":2}, {"x":4.75, "y":2}, {"x":5.75, "y":2}, {"x":6.75, "y":2}, {"x":7.75, "y":2}, {"x":8.75, "y":2}, {"x":9.75, "y":2}, {"x":10.75, "y":2}, {"x":11.75, "y":2}, {"x":12.75, "y":2}, {"x":13.75, "y":1, "w":1.25, "h":2}, {"x":15, "y":2}, {"x":0, "y":3, "w":1.25}, {"x":1.25, "y":3}, {"x":2.25, "y":3}, {"x":3.25, "y":3}, {"x":4.25, "y":3}, {"x":5.25, "y":3}, {"x":6.25, "y":3}, {"x":7.25, "y":3}, {"x":8.25, "y":3}, {"x":9.25, "y":3}, {"x":10.25, "y":3}, {"x":11.25, "y":3}, {"x":12.25, "y":3, "w":1.75}, {"x":14, "y":3}, {"x":15, "y":3}, {"x":0, "y":4, "w":1.25}, {"x":1.25, "y":4, "w":1.25}, {"x":2.5, "y":4, "w":1.25}, {"x":3.75, "y":4, "w":6.25}, {"x":10, "y":4}, {"x":11, "y":4}, {"x":12, "y":4}, {"x":13, "y":4}, {"x":14, "y":4}, {"x":15, "y":4}]
     }
   }
 }

keyboards/lfkeyboards/smk65/keymaps/default/config.h

@@ -1,3 +0,0 @@
-#pragma once
-
-// place overrides here

keyboards/lfkeyboards/smk65/keymaps/default/keymap.c

@@ -1,12 +1,25 @@
+/*
+Copyright 2020 LFKeyboards
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
 #include QMK_KEYBOARD_H
 
-enum keymap_layout {
-    VANILLA = 0,
-    FUNC,
-    SETTINGS,
+// Defines names for use in layer keycodes and the keymap
+enum layer_names {
+    _BASE,
+    _FN
 };
 
-
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
   /* Keymap VANILLA: (Base Layer) Default Layer
    * ,------------------------------------------------------------.----.
@@ -21,12 +34,12 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
    * |Ctrl|Win |Alt |       Space         |Alt |Ctrl|Func|Lft| Dn |Rig |
    * `-----------------------------------------------------------------'
    */
-  [VANILLA] = LAYOUT(
-    KC_GESC, KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS,  KC_EQL,  KC_BSPC, KC_INS,  \
-    KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC,  KC_RBRC, KC_BSLS, KC_DEL,  \
-    KC_CAPS, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT,           KC_ENT,  KC_PGUP, \
-    KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_RSFT,           KC_UP,   KC_PGDN, \
-    KC_LCTL, KC_LGUI, KC_LALT,                            KC_SPC,                    KC_RALT, KC_RCTL, MO(FUNC), KC_LEFT, KC_DOWN, KC_RGHT  \
+  [_BASE] = LAYOUT_65_ansi(
+    KC_GESC, KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS,  KC_EQL,  KC_BSPC, KC_INS,
+    KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC,  KC_RBRC, KC_BSLS, KC_DEL,
+    KC_CAPS, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT,           KC_ENT,  KC_PGUP,
+    KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_RSFT,           KC_UP,   KC_PGDN,
+    KC_LCTL, KC_LGUI, KC_LALT,                            KC_SPC,                    KC_RALT, KC_RCTL, MO(_FN),  KC_LEFT, KC_DOWN, KC_RGHT
   ),
 
   /* Keymap VANILLA: Function Layer
@@ -42,35 +55,21 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
    * |Ctrl|Win |Alt |       Space         |Alt |Ctrl|Func|Lft| Dn |Rig |
    * `-----------------------------------------------------------------'
    */
-  [FUNC] = LAYOUT(
-    KC_GRV,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_F13,  KC_F14,  \
-    MU_MOD,  _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, RGB_TOG, \
-    AU_TOG,  KC_FN1,  KC_FN3,  _______, _______, _______, _______, _______, _______, _______, _______, _______,          RESET,   RGB_MOD, \
-    KC_FN5,  KC_FN2,  KC_FN4,  _______, _______, _______, _______, MU_TOG,  RGB_VAD, RGB_VAI, _______, _______,          RGB_HUI, _______, \
-    _______, _______, _______,                            _______,                   _______, _______, _______, RGB_SAD, RGB_HUD, RGB_SAI  \
-  ),
+  [_FN] = LAYOUT_65_ansi(
+    KC_GRV,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_F13,  KC_F14,
+    MU_MOD,  _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, RGB_TOG,
+    AU_TOG,  KC_FN1,  KC_FN3,  _______, _______, _______, _______, _______, _______, _______, _______, _______,          RESET,   RGB_MOD,
+    KC_FN5,  KC_FN2,  KC_FN4,  _______, _______, _______, _______, MU_TOG,  RGB_VAD, RGB_VAI, _______, _______,          RGB_HUI, _______,
+    _______, _______, _______,                            _______,                   _______, _______, _______, RGB_SAD, RGB_HUD, RGB_SAI
+  )
 };
 
+#ifndef NO_ACTION_FUNCTION
 const uint16_t PROGMEM fn_actions[] = {
     [1] = ACTION_FUNCTION(LFK_CLICK_FREQ_HIGHER),             // FN1 - Increase Freq of audio click
     [2] = ACTION_FUNCTION(LFK_CLICK_FREQ_LOWER),              // FN2 - Decrease Freq of audio click
     [3] = ACTION_FUNCTION(LFK_CLICK_TIME_LONGER),             // FN3 - Increase length of audio click
     [4] = ACTION_FUNCTION(LFK_CLICK_TIME_SHORTER),            // FN4 - Decrease length of audio click
     [5] = ACTION_FUNCTION(LFK_CLICK_TOGGLE),                  // FN5 - Toggle audio click
-  };
-
-void matrix_init_user(void) {
-
-}
-
-void matrix_scan_user(void) {
-
-}
-
-bool process_record_user(uint16_t keycode, keyrecord_t *record) {
-  return true;
-}
-
-void led_set_user(uint8_t usb_led) {
-
-}
+};
+#endif

keyboards/lfkeyboards/smk65/keymaps/default/rules.mk

@@ -1,26 +1,11 @@
 # Build Options
-#   change to "no" to disable the options, or define them in the Makefile in
-#   the appropriate keymap folder that will get included automatically
+#   change yes to no to disable
 #
+AUDIO_ENABLE = no              # Audio output
+RGBLIGHT_ENABLE = no           # Enable keyboard RGB underglow
 
-BOOTMAGIC_ENABLE = no           # Virtual DIP switch configuration
-MOUSEKEY_ENABLE = no            # Mouse keys
-EXTRAKEY_ENABLE = yes           # Audio control and System control
-CONSOLE_ENABLE = no             # Console for debug
-COMMAND_ENABLE = no             # Commands for debug and configuration
-NKRO_ENABLE = yes               # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-BACKLIGHT_ENABLE = no           # Disable keyboard backlight functionality
-MIDI_ENABLE = no                # MIDI controls
-AUDIO_ENABLE = yes              # Audio output on port C6
-UNICODE_ENABLE = no             # Unicode
-BLUETOOTH_ENABLE = no           # Disable Bluetooth with the Adafruit EZ-Key HID
-RGBLIGHT_ENABLE = yes          	# Disable RGB underlight
-RGBLIGHT_CUSTOM_DRIVER = yes    # RGB code is implemented in lefkeyboards, not WS2812
-SLEEP_LED_ENABLE = no           # Breathing sleep LED during USB suspend
-TAP_DANCE_ENABLE = no
-
-ISSI_ENABLE = yes               # If the I2C pullup resistors aren't install this must be disabled
-WATCHDOG_ENABLE = no            # Resets keyboard if matrix_scan isn't run every 250ms
+ISSI_ENABLE = no               # If the I2C pullup resistors aren't install this must be disabled
+WATCHDOG_ENABLE = no           # Resets keyboard if matrix_scan isn't run every 250ms
 
 
 ifeq ($(strip $(ISSI_ENABLE)), yes)
@@ -30,4 +15,3 @@ endif
 ifeq ($(strip $(WATCHDOG_ENABLE)), yes)
     TMK_COMMON_DEFS += -DWATCHDOG_ENABLE
 endif
-

keyboards/lfkeyboards/smk65/keymaps/iso/config.h

@@ -1,8 +0,0 @@
-#ifndef CONFIG_USER_H
-#define CONFIG_USER_H
-
-#include "../../config.h"
-
-// place overrides here
-
-#endif

keyboards/lfkeyboards/smk65/keymaps/iso/keymap.c

@@ -1,12 +1,25 @@
+/*
+Copyright 2020 LFKeyboards
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
 #include QMK_KEYBOARD_H
 
-enum keymap_layout {
-    VANILLA = 0,
-    FUNC,
-    SETTINGS,
+// Defines names for use in layer keycodes and the keymap
+enum layer_names {
+    _BASE,
+    _FN
 };
 
-
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
   /* Keymap VANILLA: (Base Layer) Default Layer
    * ,------------------------------------------------------------.----.
@@ -21,12 +34,12 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
    * |Ctrl|Win |Alt |       Space         |Alt |Ctrl|Func|Lft| Dn |Rig |
    * `-----------------------------------------------------------------'
    */
-  [VANILLA] = LAYOUT_iso(
-    KC_GESC, KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS,  KC_EQL,  KC_BSPC, KC_INS,  \
-    KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC,  KC_RBRC, KC_ENT,  KC_DEL,  \
-    KC_CAPS, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT,  KC_NUHS,          KC_PGUP, \
-    KC_LSFT, KC_NUBS, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH,  KC_RSFT, KC_UP,   KC_PGDN, \
-    KC_LCTL, KC_LGUI, KC_LALT,                            KC_SPC,                    KC_RALT, KC_RCTL, MO(FUNC), KC_LEFT, KC_DOWN, KC_RGHT  \
+  [_BASE] = LAYOUT_65_iso(
+    KC_GESC, KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS,  KC_EQL,  KC_BSPC, KC_INS,
+    KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC,  KC_RBRC,          KC_DEL,
+    KC_CAPS, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT,  KC_NUHS, KC_ENT,  KC_PGUP,
+    KC_LSFT, KC_NUBS, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH,  KC_RSFT, KC_UP,   KC_PGDN,
+    KC_LCTL, KC_LGUI, KC_LALT,                            KC_SPC,                    KC_RALT, KC_RCTL, MO(_FN),  KC_LEFT, KC_DOWN, KC_RGHT
   ),
 
   /* Keymap VANILLA: Function Layer
@@ -42,35 +55,21 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
    * |Ctrl|Win |Alt |       Space         |Alt |Ctrl|Func|Lft| Dn |Rig |
    * `-----------------------------------------------------------------'
    */
-  [FUNC] = LAYOUT_iso(
-    KC_GRV,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_F13,  KC_F14,  \
-    MU_MOD,  _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, RESET,   RGB_TOG, \
-    AU_TOG,  KC_FN1,  KC_FN3,  _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,          RGB_MOD, \
-    KC_FN5,  _______, KC_FN2,  KC_FN4,  _______, _______, _______, _______, MU_TOG,  RGB_VAD, RGB_VAI, _______, _______, RGB_HUI, _______, \
-    _______, _______, _______,                            _______,                   _______, _______, _______, RGB_SAD, RGB_HUD, RGB_SAI  \
+  [_FN] = LAYOUT_65_iso(
+    KC_GRV,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_F13,  KC_F14,
+    MU_MOD,  _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,          RGB_TOG,
+    AU_TOG,  KC_FN1,  KC_FN3,  _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, RESET,   RGB_MOD,
+    KC_FN5,  _______, KC_FN2,  KC_FN4,  _______, _______, _______, _______, MU_TOG,  RGB_VAD, RGB_VAI, _______, _______, RGB_HUI, _______,
+    _______, _______, _______,                            _______,                   _______, _______, _______, RGB_SAD, RGB_HUD, RGB_SAI
   ),
 };
 
+#ifndef NO_ACTION_FUNCTION
 const uint16_t PROGMEM fn_actions[] = {
     [1] = ACTION_FUNCTION(LFK_CLICK_FREQ_HIGHER),                   // FN1 - Increase Freq of audio click
     [2] = ACTION_FUNCTION(LFK_CLICK_FREQ_LOWER),                    // FN2 - Decrease Freq of audio click
     [3] = ACTION_FUNCTION(LFK_CLICK_TIME_LONGER),                   // FN3 - Increase length of audio click
     [4] = ACTION_FUNCTION(LFK_CLICK_TIME_SHORTER),                  // FN4 - Decrease length of audio click
     [5] = ACTION_FUNCTION(LFK_CLICK_TOGGLE),                        // FN5 - Toggle audio click
-  };
-
-void matrix_init_user(void) {
-
-}
-
-void matrix_scan_user(void) {
-
-}
-
-bool process_record_user(uint16_t keycode, keyrecord_t *record) {
-  return true;
-}
-
-void led_set_user(uint8_t usb_led) {
-
-}
+};
+#endif

keyboards/lfkeyboards/smk65/keymaps/iso/rules.mk

@@ -1,26 +1,11 @@
 # Build Options
-#   change to "no" to disable the options, or define them in the Makefile in
-#   the appropriate keymap folder that will get included automatically
+#   change yes to no to disable
 #
-
-BOOTMAGIC_ENABLE = no           # Virtual DIP switch configuration
-MOUSEKEY_ENABLE = no            # Mouse keys
-EXTRAKEY_ENABLE = yes           # Audio control and System control
-CONSOLE_ENABLE = yes            # Console for debug
-COMMAND_ENABLE = yes            # Commands for debug and configuration
-NKRO_ENABLE = yes               # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-# BACKLIGHT_ENABLE = no           # Disable keyboard backlight functionality
-MIDI_ENABLE = no                # MIDI controls
-AUDIO_ENABLE = no               # Audio output on port C6
-UNICODE_ENABLE = no             # Unicode
-BLUETOOTH_ENABLE = no           # Disable Bluetooth with the Adafruit EZ-Key HID
-RGBLIGHT_ENABLE = no          	# Disable RGB underlight
-RGBLIGHT_CUSTOM_DRIVER = yes    # RGB code is implemented in lefkeyboards, not WS2812
-SLEEP_LED_ENABLE = yes          # Breathing sleep LED during USB suspend
-TAP_DANCE_ENABLE = no
+AUDIO_ENABLE = no              # Audio output
+RGBLIGHT_ENABLE = no           # Enable keyboard RGB underglow
 
 ISSI_ENABLE = no               # If the I2C pullup resistors aren't install this must be disabled
-WATCHDOG_ENABLE = yes           # Resets keyboard if matrix_scan isn't run every 250ms
+WATCHDOG_ENABLE = no           # Resets keyboard if matrix_scan isn't run every 250ms
 
 
 ifeq ($(strip $(ISSI_ENABLE)), yes)
@@ -30,21 +15,3 @@ endif
 ifeq ($(strip $(WATCHDOG_ENABLE)), yes)
     TMK_COMMON_DEFS += -DWATCHDOG_ENABLE
 endif
-
-
-# # Set the LFK78 hardware version. This is defined in rules.mk, but can be overidden here if desired
-# #
-# # RevB - first public release, uses atmega32u4, has audio, ISSI matrix split between RGB and backlight
-# # RevC/D - at90usb1286, no audio, ISSI device 0 is backlight, 4 is RGB
-# #
-# # Set to B, C or D
-# LFK_REV = D
-
-# ifeq ($(LFK_REV), B)
-# 	MCU = atmega32u4
-# else
-# 	MCU = at90usb1286
-# endif
-# OPT_DEFS += -DLFK_REV_$(LFK_REV)
-# OPT_DEFS += -DUSB_PRODUCT=\"LFK_Rev$(LFK_REV)\"
-

keyboards/lfkeyboards/smk65/readme.md

@@ -1,14 +1,17 @@
-SMK65
-===
+# SMK65
 
 65% layout based on Mat3o's Whitefox, but with support for SMK switches.
 
-Keyboard Maintainer: [LFKeyboards](https://github.com/lfkeyboards)  
-Hardware Supported: SMK65  
-Hardware Availability: [LFKeyboards.com](https://www.lfkeyboards.com/)
+* Keyboard Maintainer: [LFKeyboards](https://github.com/lfkeyboards)
+* Hardware Supported: SMK65
+* Hardware Availability: [LFKeyboards.com](https://www.lfkeyboards.com/)
 
 Make example for this keyboard (after setting up your build environment):
 
     make lfkeyboards/smk65:default
 
-See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) then the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information.
+Flashing example for this keyboard:
+
+    make lfkeyboards/smk65:default:flash
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

keyboards/lfkeyboards/smk65/revb/config.h

@@ -1,31 +1,27 @@
 /*
-Copyright 2012 Jun Wako <wakojun@gmail.com>
-
+Copyright 2020 LFKeyboards
 This program is free software: you can redistribute it and/or modify
 it under the terms of the GNU General Public License as published by
 the Free Software Foundation, either version 2 of the License, or
 (at your option) any later version.
-
 This program is distributed in the hope that it will be useful,
 but WITHOUT ANY WARRANTY; without even the implied warranty of
 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 GNU General Public License for more details.
-
 You should have received a copy of the GNU General Public License
 along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */
 
-#ifndef CONFIG_H
-#define CONFIG_H
+#pragma once
 
 #include "config_common.h"
 
-#define VENDOR_ID       0xFEED
-#define PRODUCT_ID      0x6062
-#define DEVICE_VER      0x0001
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0x4C46   // "LF"
+#define PRODUCT_ID      0x565B   // "s65b"
+#define DEVICE_VER      0x0006
 #define MANUFACTURER    LFKeyboards
 #define PRODUCT         SMK65v2
-#define DESCRIPTION     QMK keyboard firmware for SMK65
 
 // RevA
 // #define DIODE_DIRECTION COL2ROW
@@ -66,13 +62,16 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 /* define if matrix has ghost (lacks anti-ghosting diodes) */
 //#define MATRIX_HAS_GHOST
 
-/* number of backlight levels */
-
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE
 /* Locking resynchronize hack */
 #define LOCKING_RESYNC_ENABLE
 
+/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
+ * This is useful for the Windows task manager shortcut (ctrl+shift+esc).
+ */
+//#define GRAVE_ESC_CTRL_OVERRIDE
+
 /*
  * Force NKRO
  *
@@ -94,54 +93,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
 //#define FORCE_NKRO
 
-/*
- * Magic Key Options
- *
- * Magic keys are hotkey commands that allow control over firmware functions of
- * the keyboard. They are best used in combination with the HID Listen program,
- * found here: https://www.pjrc.com/teensy/hid_listen.html
- *
- * The options below allow the magic key functionality to be changed. This is
- * useful if your keyboard/keypad is missing keys and you want magic key support.
- *
- */
-
-/* control how magic key switches layers */
-//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS  true
-//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS  true
-//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false
-
-/* override magic key keymap */
-//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS
-//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS
-//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM
-//#define MAGIC_KEY_HELP1          H
-//#define MAGIC_KEY_HELP2          SLASH
-//#define MAGIC_KEY_DEBUG          D
-//#define MAGIC_KEY_DEBUG_MATRIX   X
-//#define MAGIC_KEY_DEBUG_KBD      K
-//#define MAGIC_KEY_DEBUG_MOUSE    M
-//#define MAGIC_KEY_VERSION        V
-//#define MAGIC_KEY_STATUS         S
-//#define MAGIC_KEY_CONSOLE        C
-//#define MAGIC_KEY_LAYER0_ALT1    ESC
-//#define MAGIC_KEY_LAYER0_ALT2    GRAVE
-//#define MAGIC_KEY_LAYER0         0
-//#define MAGIC_KEY_LAYER1         1
-//#define MAGIC_KEY_LAYER2         2
-//#define MAGIC_KEY_LAYER3         3
-//#define MAGIC_KEY_LAYER4         4
-//#define MAGIC_KEY_LAYER5         5
-//#define MAGIC_KEY_LAYER6         6
-//#define MAGIC_KEY_LAYER7         7
-//#define MAGIC_KEY_LAYER8         8
-//#define MAGIC_KEY_LAYER9         9
-//#define MAGIC_KEY_BOOTLOADER     PAUSE
-//#define MAGIC_KEY_LOCK           CAPS
-//#define MAGIC_KEY_EEPROM         E
-//#define MAGIC_KEY_NKRO           N
-//#define MAGIC_KEY_SLEEP_LED      Z
-
 /*
  * Feature disable options
  *  These options are also useful to firmware size reduction.
@@ -160,4 +111,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 //#define NO_ACTION_MACRO
 //#define NO_ACTION_FUNCTION
 
-#endif
+/* Bootmagic Lite key configuration */
+//#define BOOTMAGIC_LITE_ROW 0
+//#define BOOTMAGIC_LITE_COLUMN 0

keyboards/lfkeyboards/smk65/revb/revb.c

@@ -1,3 +1,17 @@
+/*
+Copyright 2020 LFKeyboards
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
 #include <avr/sfr_defs.h>
 #include <avr/timer_avr.h>
 #include <avr/wdt.h>
@@ -132,13 +146,6 @@ void reset_keyboard_kb(){
     reset_keyboard();
 }
 
-void led_set_kb(uint8_t usb_led)
-{
-    // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
-
-    led_set_user(usb_led);
-}
-
 // LFK lighting info
 const uint8_t switch_matrices[] = {0, 1};
 const uint8_t rgb_matrices[] = {6, 7};

keyboards/lfkeyboards/smk65/revb/revb.h

@@ -0,0 +1,134 @@
+/*
+Copyright 2020 LFKeyboards
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+/* if the kb.h file exists (because we're running from qmkbuilder) include it */
+#ifdef __has_include
+#if __has_include("kb.h")
+#include "kb.h"
+#endif
+#endif
+
+#include "quantum.h"
+#include "matrix.h"
+#include <avr/sfr_defs.h>
+
+#ifndef cbi
+#define cbi(sfr, bit) (_SFR_BYTE(sfr) &= ~_BV(bit))
+#endif
+
+#ifndef sbi
+#define sbi(sfr, bit) (_SFR_BYTE(sfr) |= _BV(bit))
+#endif
+
+
+typedef struct RGB_Color {
+    uint16_t red;
+    uint16_t green;
+    uint16_t blue;
+} RGB_Color;
+
+typedef struct Layer_Info {
+    uint32_t layer;
+    uint32_t mask;
+    RGB_Color color;
+} Layer_Info;
+
+extern const uint32_t layer_count;
+extern const Layer_Info layer_info[];
+
+enum action_functions {
+    LFK_CLEAR = 0,          // Resets all layers
+    LFK_ESC_TILDE,          // esc+lshift = ~
+    LFK_SET_DEFAULT_LAYER,  // changes and saves current base layer to eeprom
+    LFK_CLICK_TOGGLE,       // Adjusts click duration
+    LFK_CLICK_FREQ_HIGHER,  // Adjusts click frequency
+    LFK_CLICK_FREQ_LOWER,   // Adjusts click frequency
+    LFK_CLICK_TIME_LONGER,  // Adjusts click duration
+    LFK_CLICK_TIME_SHORTER, // Adjusts click duration
+    LFK_DEBUG_SETTINGS,     // prints LED and click settings to HID
+    LFK_LED_TEST            // cycles through switch and RGB LEDs
+};
+
+#define CLICK_HZ 500
+#define CLICK_MS 2
+#define CLICK_ENABLED 0
+
+void reset_keyboard_kb(void);
+void click(uint16_t freq, uint16_t duration);
+
+// readability
+#define ___ KC_NO
+
+/* Vanilla Keymap */
+// This a shortcut to help you visually see your layout.
+/*
+* ,-------------------------------------------------------------------------------.
+* | 11 | 12 | 13 | 14 | 15 | 16 | 17 | 18 | 19 | 1A | 1B | 1C | 1D |   1E    | 1G |
+* |-------------------------------------------------------------------------------|
+* | 21   | 22 |23 | 24 | 25 | 26 | 27 | 28 | 29 | 2A | 2B | 2C | 2D |   2F   | 2G |
+* |-------------------------------------------------------------------------------|
+* | 31    | 32 |33 | 34 | 35 | 36 | 37 | 38 | 39 | 3A | 3B | 3C |      3F    | 3G |
+* |-------------------------------------------------------------------------------|
+* | 41      | 42 |43 | 45 | 46 | 47 | 48 | 49 | 4A | 4B | 4C |    4D    | 4F | 4G |
+* |-------------------------------------------------------------------------------|
+* | 51  |  52  | 53  |              57        | 5A | 5B | 5C | 5D |  5E | 3E | 4E |
+* `-------------------------------------------------------------------------------'
+*/
+// The first section contains all of the arguements
+// The second converts the arguments into a two-dimensional array
+#define LAYOUT_65_ansi( \
+    k11, k12, k13, k14, k15, k16, k17, k18, k19, k1A, k1B, k1C, k1D,         k1F, k1G, \
+    k21,   k22, k23, k24, k25, k26, k27, k28, k29, k2A, k2B, k2C, k2D,       k2F, k2G, \
+    k31,    k32, k33, k34, k35, k36, k37, k38, k39, k3A, k3B, k3C,           k3F, k3G, \
+    k41,      k43, k44, k45, k46, k47, k48, k49, k4A, k4B, k4C,         k4D, k4F, k4G, \
+    k51, k52, k53,              k57,                     k5B, k5C, k5D, k5E, k3E, k4E  \
+) { \
+    { k11, k12, k13, k14, k15, k16, k17, k18, k19, k1A, k1B, k1C, k1D, ___, k1F, k1G }, \
+    { k21, k22, k23, k24, k25, k26, k27, k28, k29, k2A, k2B, k2C, k2D, ___, k2F, k2G }, \
+    { k31, k32, k33, k34, k35, k36, k37, k38, k39, k3A, k3B, k3C, ___, k3E, k3F, k3G }, \
+    { k41, ___, k43, k44, k45, k46, k47, k48, k49, k4A, k4B, k4C, k4D, k4E, k4F, k4G }, \
+    { k51, k52, k53, ___, ___, ___, k57, ___, ___, ___, k5B, k5C, k5D, k5E, ___, ___ }, \
+}
+
+#define LAYOUT_65_iso( \
+    k11, k12, k13, k14, k15, k16, k17, k18, k19, k1A, k1B, k1C, k1D,         k1F, k1G, \
+    k21,   k22, k23, k24, k25, k26, k27, k28, k29, k2A, k2B, k2C, k2D,            k2G, \
+    k31,    k32, k33, k34, k35, k36, k37, k38, k39, k3A, k3B, k3C,      k3F, k2F, k3G, \
+    k41, k42, k43, k44, k45, k46, k47, k48, k49, k4A, k4B, k4C,         k4D, k4F, k4G, \
+    k51, k52, k53,              k57,                     k5B, k5C, k5D, k5E, k3E, k4E  \
+) { \
+    { k11, k12, k13, k14, k15, k16, k17, k18, k19, k1A, k1B, k1C, k1D, ___, k1F, k1G }, \
+    { k21, k22, k23, k24, k25, k26, k27, k28, k29, k2A, k2B, k2C, k2D, ___, k2F, k2G }, \
+    { k31, k32, k33, k34, k35, k36, k37, k38, k39, k3A, k3B, k3C, ___, k3E, k3F, k3G }, \
+    { k41, k42, k43, k44, k45, k46, k47, k48, k49, k4A, k4B, k4C, k4D, k4E, k4F, k4G }, \
+    { k51, k52, k53, ___, ___, ___, k57, ___, ___, ___, k5B, k5C, k5D, k5E, ___, ___ }, \
+}
+
+// TODO: remove backwards compatibility with previous keymaps
+#define LAYOUT LAYOUT_65_ansi
+#define LAYOUT_iso( \
+    k11, k12, k13, k14, k15, k16, k17, k18, k19, k1A, k1B, k1C, k1D,         k1E, k1G, \
+    k21,   k22, k23, k24, k25, k26, k27, k28, k29, k2A, k2B, k2C, k2D,       k2F, k2G, \
+    k31,    k32, k33, k34, k35, k36, k37, k38, k39, k3A, k3B, k3C,           k3F, k3G, \
+    k41, k42, k43, k44, k45, k46, k47, k48, k49, k4A, k4B, k4C,         k4D, k4F, k4G, \
+    k51, k52, k53,              k57,                     k5B, k5C, k5D, k5E, k3E, k4E  \
+) { \
+    { k11, k12, k13, k14, k15, k16, k17, k18, k19, k1A, k1B, k1C, k1D, k1E, ___, k1G }, \
+    { k21, k22, k23, k24, k25, k26, k27, k28, k29, k2A, k2B, k2C, k2D, ___, k2F, k2G }, \
+    { k31, k32, k33, k34, k35, k36, k37, k38, k39, k3A, k3B, k3C, ___, k3E, k3F, k3G }, \
+    { k41, k42, k43, k44, k45, k46, k47, k48, k49, k4A, k4B, k4C, k4D, k4E, k4F, k4G }, \
+    { k51, k52, k53, ___, ___, ___, k57, ___, ___, ___, k5B, k5C, k5D, k5E, ___, ___ }, \
+}

keyboards/lfkeyboards/smk65/revb/rules.mk

@@ -0,0 +1,16 @@
+# MCU name
+MCU = at90usb646
+
+# Bootloader selection
+BOOTLOADER = atmel-dfu
+
+# Build Options
+#   change yes to no to disable
+#
+BACKLIGHT_ENABLE = no           # Enable keyboard backlight functionality
+RGBLIGHT_ENABLE = no            # Enable keyboard RGB underglow
+RGBLIGHT_CUSTOM_DRIVER = yes    # RGB code is implemented in lefkeyboards, not WS2812
+AUDIO_ENABLE = no               # Audio output
+
+# Extra source files for IS3731 lighting
+SRC += TWIlib.c issi.c lighting.c

keyboards/lfkeyboards/smk65/revf/config.h

@@ -0,0 +1,134 @@
+/*
+Copyright 2020 LFKeyboards
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0x4C46   // "LF"
+#define PRODUCT_ID      0x565F   // "s65f"
+#define DEVICE_VER      0x0006
+#define MANUFACTURER    LFKeyboards
+#define PRODUCT         SMK65v2
+
+/* key matrix size */
+#define MATRIX_ROWS 5
+#define MATRIX_COLS 16
+
+/*
+ * Keyboard Matrix Assignments
+ *
+ * Change this to how you wired your keyboard
+ * COLS: AVR pins used for columns, left to right
+ * ROWS: AVR pins used for rows, top to bottom
+ * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
+ *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
+ *
+ */
+#define MATRIX_ROW_PINS { B0, B3, B2, B1, F5 }
+#define MATRIX_COL_PINS { E6, F4, B7, D5, D3, D2, F6, F7, C7, C6, B6, B5, B4, D7, D6, D4 }
+#define UNUSED_PINS
+
+/* COL2ROW, ROW2COL */
+#define DIODE_DIRECTION COL2ROW
+
+//#define RGB_DI_PIN E2
+//#ifdef RGB_DI_PIN
+#    define RGBLED_NUM 28
+//#    define RGBLIGHT_HUE_STEP 8
+//#    define RGBLIGHT_SAT_STEP 8
+//#    define RGBLIGHT_VAL_STEP 8
+//#    define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
+//#    define RGBLIGHT_SLEEP  /* If defined, the RGB lighting will be switched off when the host goes to sleep */
+/*== all animations enable ==*/
+//#    define RGBLIGHT_ANIMATIONS
+/*== or choose animations ==*/
+//#    define RGBLIGHT_EFFECT_BREATHING
+//#    define RGBLIGHT_EFFECT_RAINBOW_MOOD
+//#    define RGBLIGHT_EFFECT_RAINBOW_SWIRL
+//#    define RGBLIGHT_EFFECT_SNAKE
+//#    define RGBLIGHT_EFFECT_KNIGHT
+//#    define RGBLIGHT_EFFECT_CHRISTMAS
+//#    define RGBLIGHT_EFFECT_STATIC_GRADIENT
+//#    define RGBLIGHT_EFFECT_RGB_TEST
+//#    define RGBLIGHT_EFFECT_ALTERNATING
+/*== customize breathing effect ==*/
+/*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
+//#    define RGBLIGHT_BREATHE_TABLE_SIZE 256      // 256(default) or 128 or 64
+/*==== use exp() and sin() ====*/
+//#    define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85  // 1 to 2.7
+//#    define RGBLIGHT_EFFECT_BREATHE_MAX    255   // 0 to 255
+//#endif
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCE 5
+
+/* define if matrix has ghost (lacks anti-ghosting diodes) */
+//#define MATRIX_HAS_GHOST
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
+ * This is useful for the Windows task manager shortcut (ctrl+shift+esc).
+ */
+//#define GRAVE_ESC_CTRL_OVERRIDE
+
+/*
+ * Force NKRO
+ *
+ * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
+ * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
+ * makefile for this to work.)
+ *
+ * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
+ * until the next keyboard reset.
+ *
+ * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
+ * fully operational during normal computer usage.
+ *
+ * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
+ * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
+ * bootmagic, NKRO mode will always be enabled until it is toggled again during a
+ * power-up.
+ *
+ */
+//#define FORCE_NKRO
+
+/*
+ * Feature disable options
+ *  These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+//#define NO_DEBUG
+
+/* disable print */
+//#define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+
+/* disable these deprecated features by default */
+#define NO_ACTION_MACRO
+#define NO_ACTION_FUNCTION
+
+/* Bootmagic Lite key configuration */
+//#define BOOTMAGIC_LITE_ROW 0
+//#define BOOTMAGIC_LITE_COLUMN 0

keyboards/lfkeyboards/smk65/revf/keymaps/via/keymap.c

@@ -0,0 +1,46 @@
+/*
+Copyright 2020 LFKeyboards
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+  [0] = LAYOUT_all(
+    KC_GESC, KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS,  KC_EQL,  KC_BSPC, KC_BSPC, KC_INS,
+    KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC,  KC_RBRC, KC_BSLS, KC_DEL,
+    KC_CAPS, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT,  KC_BSLS, KC_ENT,  KC_PGUP,
+    KC_LSFT, KC_NUBS, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH,  KC_RSFT,          KC_UP,   KC_PGDN,
+    KC_LCTL, KC_LGUI, KC_LALT,                   KC_SPC,  KC_SPC,  KC_SPC,           KC_RALT, KC_RCTL, MO(1),    KC_LEFT, KC_DOWN, KC_RGHT
+  ),
+  [1] = LAYOUT_all(
+    KC_GRV,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_F13,  KC_F14,  KC_F15,
+    _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+    _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, RESET,   _______,
+    _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,          _______, _______,
+    _______, _______, _______,                   _______, _______, _______,          _______, _______, _______, _______, _______, _______
+  ),
+  [2] = LAYOUT_all(
+    _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+    _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+    _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+    _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,          _______, _______,
+    _______, _______, _______,                   _______, _______, _______,          _______, _______, _______, _______, _______, _______
+  ),
+  [3] = LAYOUT_all(
+    _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+    _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+    _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+    _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,          _______, _______,
+    _______, _______, _______,                   _______, _______, _______,          _______, _______, _______, _______, _______, _______
+  )
+};

keyboards/lfkeyboards/smk65/revf/keymaps/via/rules.mk

@@ -0,0 +1 @@
+VIA_ENABLE = yes

keyboards/lfkeyboards/smk65/revf/revf.h

@@ -0,0 +1,71 @@
+/*
+Copyright 2020 LFKeyboards
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+#include "quantum.h"
+
+// readability
+#define ___ KC_NO
+
+/* This is a shortcut to help you visually see your layout.
+ *
+ * The first section contains all of the arguments representing the physical
+ * layout of the board and position of the keys.
+ *
+ * The second converts the arguments into a two-dimensional array which
+ * represents the switch matrix.
+ */
+
+#define LAYOUT_65_ansi( \
+    k11, k12, k13, k14, k15, k16, k17, k18, k19, k1A, k1B, k1C, k1D,         k1F, k1G, \
+    k21,   k22, k23, k24, k25, k26, k27, k28, k29, k2A, k2B, k2C, k2D,       k2F, k2G, \
+    k31,    k32, k33, k34, k35, k36, k37, k38, k39, k3A, k3B, k3C,           k3F, k3G, \
+    k41,      k43, k44, k45, k46, k47, k48, k49, k4A, k4B, k4C,         k4D, k4F, k4G, \
+    k51, k52, k53,              k57,                     k5B, k5C, k5D, k5E, k3E, k4E  \
+) { \
+    { k11, k12, k13, k14, k15, k16, k17, k18, k19, k1A, k1B, k1C, k1D, ___, k1F, k1G }, \
+    { k21, k22, k23, k24, k25, k26, k27, k28, k29, k2A, k2B, k2C, k2D, ___, k2F, k2G }, \
+    { k31, k32, k33, k34, k35, k36, k37, k38, k39, k3A, k3B, k3C, ___, k3E, k3F, k3G }, \
+    { k41, ___, k43, k44, k45, k46, k47, k48, k49, k4A, k4B, k4C, k4D, k4E, k4F, k4G }, \
+    { k51, k52, k53, ___, ___, ___, k57, ___, ___, ___, k5B, k5C, k5D, k5E, ___, ___ }, \
+}
+
+#define LAYOUT_65_iso( \
+    k11, k12, k13, k14, k15, k16, k17, k18, k19, k1A, k1B, k1C, k1D,         k1F, k1G, \
+    k21,   k22, k23, k24, k25, k26, k27, k28, k29, k2A, k2B, k2C, k2D,            k2G, \
+    k31,    k32, k33, k34, k35, k36, k37, k38, k39, k3A, k3B, k3C,      k3D, k2F, k3G, \
+    k41, k42, k43, k44, k45, k46, k47, k48, k49, k4A, k4B, k4C,         k4D, k4F, k4G, \
+    k51, k52, k53,              k57,                     k5B, k5C, k5D, k5E, k3E, k4E  \
+) { \
+    { k11, k12, k13, k14, k15, k16, k17, k18, k19, k1A, k1B, k1C, k1D, ___, k1F, k1G }, \
+    { k21, k22, k23, k24, k25, k26, k27, k28, k29, k2A, k2B, k2C, k2D, ___, k2F, k2G }, \
+    { k31, k32, k33, k34, k35, k36, k37, k38, k39, k3A, k3B, k3C, k3D, k3E, ___, k3G }, \
+    { k41, k42, k43, k44, k45, k46, k47, k48, k49, k4A, k4B, k4C, k4D, k4E, k4F, k4G }, \
+    { k51, k52, k53, ___, ___, ___, k57, ___, ___, ___, k5B, k5C, k5D, k5E, ___, ___ }, \
+}
+
+#define LAYOUT_all( \
+    k11, k12, k13, k14, k15, k16, k17, k18, k19, k1A, k1B, k1C, k1D, k1E,    k1F, k1G, \
+    k21,   k22, k23, k24, k25, k26, k27, k28, k29, k2A, k2B, k2C, k2D,       k2F, k2G, \
+    k31,    k32, k33, k34, k35, k36, k37, k38, k39, k3A, k3B, k3C,      k3D, k3F, k3G, \
+    k41, k42, k43, k44, k45, k46, k47, k48, k49, k4A, k4B, k4C,         k4D, k4F, k4G, \
+    k51, k52, k53,         k55, k57, k59,                k5B, k5C, k5D, k5E, k3E, k4E  \
+) { \
+    { k11, k12, k13, k14, k15, k16, k17, k18, k19, k1A, k1B, k1C, k1D, k1E, k1F, k1G }, \
+    { k21, k22, k23, k24, k25, k26, k27, k28, k29, k2A, k2B, k2C, k2D, ___, k2F, k2G }, \
+    { k31, k32, k33, k34, k35, k36, k37, k38, k39, k3A, k3B, k3C, k3D, k3E, k3F, k3G }, \
+    { k41, k42, k43, k44, k45, k46, k47, k48, k49, k4A, k4B, k4C, k4D, k4E, k4F, k4G }, \
+    { k51, k52, k53, ___, k55, ___, k57, ___, k59, ___, k5B, k5C, k5D, k5E, ___, ___ }, \
+}

keyboards/lfkeyboards/smk65/revf/rules.mk

@@ -0,0 +1,11 @@
+# MCU name
+MCU = atmega32u4
+
+# Bootloader selection
+BOOTLOADER = halfkay
+
+# Build Options
+#   change yes to no to disable
+#
+RGBLIGHT_ENABLE = no        	# TODO: Enable keyboard RGB underglow
+RGBLIGHT_CUSTOM_DRIVER = yes    # RGB code is implemented in lefkeyboards, not WS2812

keyboards/lfkeyboards/smk65/rules.mk

@@ -1,15 +1,20 @@
-# MCU name
-MCU = at90usb646
+# Build Options
+#   change yes to no to disable
+#
+BOOTMAGIC_ENABLE = lite     # Virtual DIP switch configuration
+MOUSEKEY_ENABLE = yes       # Mouse keys
+EXTRAKEY_ENABLE = yes       # Audio control and System control
+CONSOLE_ENABLE = yes         # Console for debug
+COMMAND_ENABLE = no         # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = yes           # USB Nkey Rollover
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
+RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
+BLUETOOTH_ENABLE = no       # Enable Bluetooth
+AUDIO_ENABLE = no           # Audio output
 
-# Bootloader selection
-#   Teensy       halfkay
-#   Pro Micro    caterina
-#   Atmel DFU    atmel-dfu
-#   LUFA DFU     lufa-dfu
-#   QMK DFU      qmk-dfu
-#   ATmega32A    bootloadHID
-#   ATmega328P   USBasp
-BOOTLOADER = atmel-dfu
+DEFAULT_FOLDER = lfkeyboards/smk65/revb
 
-# Extra source files for IS3731 lighting
-SRC = TWIlib.c issi.c lighting.c
+LAYOUTS = 65_ansi 65_iso

keyboards/lfkeyboards/smk65/smk65.h

@@ -1,107 +1,23 @@
-#ifndef SMK65_H
-#define SMK65_H
+/*
+Copyright 2020 LFKeyboards
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
 
-/* if the kb.h file exists (because we're running from qmkbuilder) include it */
-#ifdef __has_include
-#if __has_include("kb.h")
-#include "kb.h"
-#endif
-#endif
+#pragma once
 
 #include "quantum.h"
-#include "matrix.h"
-#include <avr/sfr_defs.h>
 
-#ifndef cbi
-#define cbi(sfr, bit) (_SFR_BYTE(sfr) &= ~_BV(bit))
+#ifdef KEYBOARD_lfkeyboards_smk65_revb
+    #include "revb.h"
+#elif KEYBOARD_lfkeyboards_smk65_revf
+    #include "revf.h"
 #endif
-
-#ifndef sbi
-#define sbi(sfr, bit) (_SFR_BYTE(sfr) |= _BV(bit))
-#endif
-
-
-typedef struct RGB_Color {
-    uint16_t red;
-    uint16_t green;
-    uint16_t blue;
-} RGB_Color;
-
-typedef struct Layer_Info {
-    uint32_t layer;
-    uint32_t mask;
-    RGB_Color color;
-} Layer_Info;
-
-extern const uint32_t layer_count;
-extern const Layer_Info layer_info[];
-
-enum action_functions {
-    LFK_CLEAR = 0,          // Resets all layers
-    LFK_ESC_TILDE,          // esc+lshift = ~
-    LFK_SET_DEFAULT_LAYER,  // changes and saves current base layer to eeprom
-    LFK_CLICK_TOGGLE,       // Adjusts click duration
-    LFK_CLICK_FREQ_HIGHER,  // Adjusts click frequency
-    LFK_CLICK_FREQ_LOWER,   // Adjusts click frequency
-    LFK_CLICK_TIME_LONGER,  // Adjusts click duration
-    LFK_CLICK_TIME_SHORTER, // Adjusts click duration
-    LFK_DEBUG_SETTINGS,     // prints LED and click settings to HID
-    LFK_LED_TEST            // cycles through switch and RGB LEDs
-};
-
-#define CLICK_HZ 500
-#define CLICK_MS 2
-#define CLICK_ENABLED 0
-
-void reset_keyboard_kb(void);
-void click(uint16_t freq, uint16_t duration);
-
-// readability
-#define ___ KC_NO
-
-/* Vanilla Keymap */
-// This a shortcut to help you visually see your layout.
-/*
-* ,-------------------------------------------------------------------------------.
-* | 11 | 12 | 13 | 14 | 15 | 16 | 17 | 18 | 19 | 1A | 1B | 1C | 1D |   1E    | 1G |
-* |-------------------------------------------------------------------------------|
-* | 21   | 22 |23 | 24 | 25 | 26 | 27 | 28 | 29 | 2A | 2B | 2C | 2D |   2F   | 2G |
-* |-------------------------------------------------------------------------------|
-* | 31    | 32 |33 | 34 | 35 | 36 | 37 | 38 | 39 | 3A | 3B | 3C |      3F    | 3G |
-* |-------------------------------------------------------------------------------|
-* | 41      | 42 |43 | 45 | 46 | 47 | 48 | 49 | 4A | 4B | 4C |    4D    | 4F | 4G |
-* |-------------------------------------------------------------------------------|
-* | 51  |  52  | 53  |              57        | 5A | 5B | 5C | 5D |  5E | 3E | 4E |
-* `-------------------------------------------------------------------------------'
-*/
-// The first section contains all of the arguements
-// The second converts the arguments into a two-dimensional array
-#define LAYOUT( \
-    k11, k12, k13, k14, k15, k16, k17, k18, k19, k1A, k1B, k1C, k1D,         k1F, k1G, \
-    k21,   k22, k23, k24, k25, k26, k27, k28, k29, k2A, k2B, k2C, k2D,       k2F, k2G, \
-    k31,    k32, k33, k34, k35, k36, k37, k38, k39, k3A, k3B, k3C,           k3F, k3G, \
-    k41,      k43, k44, k45, k46, k47, k48, k49, k4A, k4B, k4C,         k4D, k4F, k4G, \
-    k51, k52, k53,              k57,                     k5B, k5C, k5D, k5E, k3E, k4E  \
-) { \
-    { k11, k12, k13, k14, k15, k16, k17, k18, k19, k1A, k1B, k1C, k1D, ___, k1F, k1G }, \
-    { k21, k22, k23, k24, k25, k26, k27, k28, k29, k2A, k2B, k2C, k2D, ___, k2F, k2G }, \
-    { k31, k32, k33, k34, k35, k36, k37, k38, k39, k3A, k3B, k3C, ___, k3E, k3F, k3G }, \
-    { k41, ___, k43, k44, k45, k46, k47, k48, k49, k4A, k4B, k4C, k4D, k4E, k4F, k4G }, \
-    { k51, k52, k53, ___, ___, ___, k57, ___, ___, ___, k5B, k5C, k5D, k5E, ___, ___ }, \
-}
-
-#define LAYOUT_iso( \
-    k11, k12, k13, k14, k15, k16, k17, k18, k19, k1A, k1B, k1C, k1D,         k1E, k1G, \
-    k21,   k22, k23, k24, k25, k26, k27, k28, k29, k2A, k2B, k2C, k2D,       k2F, k2G, \
-    k31,    k32, k33, k34, k35, k36, k37, k38, k39, k3A, k3B, k3C,           k3F, k3G, \
-    k41, k42, k43, k44, k45, k46, k47, k48, k49, k4A, k4B, k4C,         k4D, k4F, k4G, \
-    k51, k52, k53,              k57,                     k5B, k5C, k5D, k5E, k3E, k4E  \
-) { \
-    { k11, k12, k13, k14, k15, k16, k17, k18, k19, k1A, k1B, k1C, k1D, k1E, ___, k1G }, \
-    { k21, k22, k23, k24, k25, k26, k27, k28, k29, k2A, k2B, k2C, k2D, ___, k2F, k2G }, \
-    { k31, k32, k33, k34, k35, k36, k37, k38, k39, k3A, k3B, k3C, ___, k3E, k3F, k3G }, \
-    { k41, k42, k43, k44, k45, k46, k47, k48, k49, k4A, k4B, k4C, k4D, k4E, k4F, k4G }, \
-    { k51, k52, k53, ___, ___, ___, k57, ___, ___, ___, k5B, k5C, k5D, k5E, ___, ___ }, \
-}
-
-#endif //SMK65_H

keyboards/niu_mini/keymaps/dyesub/keymap.c

@@ -0,0 +1,74 @@
+ /* Copyright 2020 Chus Jara Peinado
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details. 
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+    /* Layer 0
+     * ,-----------------------------------------------------------------------------------.
+     * | Tab  |   Q  |   W  |   E  |   R  |   T  |   Y  |   U  |   I  |   O  |   P  | Bksp |
+     * |------+------+------+------+------+-------------+------+------+------+------+------|
+     * | Esc  |   A  |   S  |   D  |   F  |   G  |   H  |   J  |   K  |   L  |   ;  |Enter |
+     * |------+------+------+------+------+------|------+------+------+------+------+------|
+     * | Shift|   Z  |   X  |   C  |   V  |   B  |   N  |   M  |   ,  |   .  |  Up  |  ?   |
+     * |------+------+------+------+------+------+------+------+------+------+------+------|
+     * | Ctrl |  GUI | Alt  |  "   |Layer1|    Space    |Layer2|  -   | Left | Down |Right |
+     * `-----------------------------------------------------------------------------------'
+     */
+    [0] = LAYOUT_planck_mit(
+        KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,  KC_T,   KC_Y,   KC_U,  KC_I,    KC_O,    KC_P,    KC_BSPC,
+        KC_ESC,  KC_A,    KC_S,    KC_D,    KC_F,  KC_G,   KC_H,   KC_J,  KC_K,    KC_L,    KC_SCLN, KC_ENT,
+        KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,  KC_B,   KC_N,   KC_M,  KC_COMM, KC_DOT,  KC_UP,   KC_SLSH,
+        KC_LCTL, KC_LGUI, KC_LALT, KC_QUOT, MO(1),     KC_SPC,     MO(2), KC_MINS, KC_LEFT, KC_DOWN, KC_RGHT
+    ),
+
+    /* Layer 1
+     * ,-----------------------------------------------------------------------------------.
+     * |      |  F1  |  F2  |  F3  |  F4  |  F5  |  F6  |  F7  |  F8  |  F9  |  F10 | Del  |
+     * |------+------+------+------+------+-------------+------+------+------+------+------|
+     * |      | F11  | F12  |      |      |      |      |      |      |      |      |      |
+     * |------+------+------+------+------+------|------+------+------+------+------+------|
+     * |      |      |      |      |      |      |      |      |      |      |      |      |
+     * |------+------+------+------+------+------+------+------+------+------+------+------|
+     * |      |      |      |      |      |      |      |      |      |      |      |Reset |
+     * `-----------------------------------------------------------------------------------'
+     */
+    [1] = LAYOUT_planck_mit(
+        _______, KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_DEL,
+        _______, KC_F11,  KC_F12,  _______, _______, _______, _______, _______, _______, _______, _______, _______,
+        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+        _______, _______, _______, _______, _______,     _______,      _______, _______, _______, _______, RESET
+    ),
+
+    /* Layer 2 (r_ Indicates RGB Controls)
+     * ,-----------------------------------------------------------------------------------.
+     * |   `  |   1  |   2  |   3  |   4  |   5  |   6  |   7  |   8  |   9  |   0  |      |
+     * |------+------+------+------+------+-------------+------+------+------+------+------|
+     * |      |      |      |      |      |      |  [   |   ]  |   \  |   "  |      |      |
+     * |------+------+------+------+------+------|------+------+------+------+------+------|
+     * |      |      |      |      |      |      |  -   |   =  |      |      | Vol+ |PrtScr|
+     * |------+------+------+------+------+------+------+------+------+------+------+------|
+     * |      |      |      |      |      |      |      |      |      |      | Vol- | Mute |
+     * `-----------------------------------------------------------------------------------'
+     */
+    [2] = LAYOUT_planck_mit(
+        KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    _______,
+        _______, _______, _______, _______, _______, _______, KC_LBRC, KC_RBRC, KC_BSLS, KC_QUOT, _______, _______,
+        _______, _______, _______, _______, _______, _______, KC_MINS, KC_EQL,  _______, _______, KC_VOLU, KC_PSCR,
+        _______, _______, _______, _______, _______,     _______,      _______, _______, _______, KC_VOLD, KC_MUTE
+    )
+};

keyboards/niu_mini/keymaps/dyesub/readme.md

@@ -0,0 +1,7 @@
+# Dye sub layout
+
+Simple layout based on the keycaps [DYE SUB](https://kbdfans.com/collections/oem-profile/products/40-layou-dye-sub-keycaps) from KDBFans.
+
+## Notes
+- There is a different ESC key position in this layout.
+- The mouse key, backlight and console for debug are disabled (Enable them by just modifying the `rules.mk` file).

keyboards/niu_mini/keymaps/dyesub/rules.mk

@@ -0,0 +1,2 @@
+MOUSEKEY_ENABLE = no
+BACKLIGHT_ENABLE = no

lib/python/qmk/constants.py

@@ -9,7 +9,6 @@ QMK_FIRMWARE = Path.cwd()
 MAX_KEYBOARD_SUBFOLDERS = 5
 
 # Supported processor types
-ARM_PROCESSORS = 'cortex-m0', 'cortex-m0plus', 'cortex-m3', 'cortex-m4', 'MKL26Z64', 'MK20DX128', 'MK20DX256', 'STM32F042', 'STM32F072', 'STM32F103', 'STM32F303', 'STM32F401', 'STM32F411'
-AVR_PROCESSORS = 'atmega16u2', 'atmega32u2', 'atmega16u4', 'atmega32u4', 'at90usb646', 'at90usb647', 'at90usb1286', 'at90usb1287', 'atmega328p', 'atmega32a', None
-ALL_PROCESSORS = ARM_PROCESSORS + AVR_PROCESSORS
-VUSB_PROCESSORS = 'atmega328p', 'atmega32a', 'atmega328', 'attiny85'
+CHIBIOS_PROCESSORS = 'cortex-m0', 'cortex-m0plus', 'cortex-m3', 'cortex-m4', 'MKL26Z64', 'MK20DX128', 'MK20DX256', 'STM32F042', 'STM32F072', 'STM32F103', 'STM32F303', 'STM32F401', 'STM32F411'
+LUFA_PROCESSORS = 'atmega16u2', 'atmega32u2', 'atmega16u4', 'atmega32u4', 'at90usb646', 'at90usb647', 'at90usb1286', 'at90usb1287', None
+VUSB_PROCESSORS = 'atmega32a', 'atmega328p', 'atmega328', 'attiny85'

lib/python/qmk/info.py

@@ -6,7 +6,7 @@ from pathlib import Path
 
 from milc import cli
 
-from qmk.constants import ARM_PROCESSORS, AVR_PROCESSORS, VUSB_PROCESSORS
+from qmk.constants import CHIBIOS_PROCESSORS, LUFA_PROCESSORS, VUSB_PROCESSORS
 from qmk.c_parse import find_layouts
 from qmk.keyboard import config_h, rules_mk
 from qmk.makefile import parse_rules_mk_file
@@ -95,9 +95,9 @@ def _extract_rules_mk(info_data):
     rules = rules_mk(info_data['keyboard_folder'])
     mcu = rules.get('MCU')
 
-    if mcu in ARM_PROCESSORS:
+    if mcu in CHIBIOS_PROCESSORS:
         arm_processor_rules(info_data, rules)
-    elif mcu in AVR_PROCESSORS:
+    elif mcu in LUFA_PROCESSORS + VUSB_PROCESSORS:
         avr_processor_rules(info_data, rules)
     else:
         cli.log.warning("%s: Unknown MCU: %s" % (info_data['keyboard_folder'], mcu))

lib/python/qmk/keymap.py

@@ -103,6 +103,8 @@ def generate(keyboard, layout, layers, type='c', keymap=None):
         for layer_num, layer in enumerate(layers):
             if layer_num != 0:
                 layer_txt[-1] = layer_txt[-1] + ','
+
+            layer = map(_strip_any, layer)
             layer_keys = ', '.join(layer)
             layer_txt.append('\t[%s] = %s(%s)' % (layer_num, layout, layer_keys))