Add EECONFIG_{KB,USER}_DATA_SIZE docs (#26200)

Co-authored-by: Joel Challis <git@zvecr.com>

.github/copilot-instructions.md

@@ -0,0 +1,430 @@
+---
+applyTo: "**"
+excludeAgent:
+  - "coding-agent"
+---
+# GitHub Copilot Instructions for QMK Pull Request Review
+This document provides automated review guidance based on the [QMK PR Checklist](https://docs.qmk.fm/pr_checklist) and it is intended only for use by GitHub Copilot code-review agent during pull request reviews.
+
+## General PR Requirements
+
+### Branch and Submission Standards
+- **Source Branch Policy**: Verify PR is NOT submitted from submitter's own `master` branch
+  - Flag if submitter is using their own `master` branch as source
+  - Suggest using feature branches instead for cleaner fork management
+- **Target Branch Policy**:
+  - **New keyboard additions** → `master` branch (new folders under `keyboards/`)
+  - **All other changes** → `develop` branch:
+    - Keyboard updates, refactors, or moves
+    - Core code changes
+    - Data-driven configuration migrations
+    - Any modifications to existing keyboards
+- **PR Scope**: PRs should contain the smallest set of modifications for a single change
+  - Flag PRs that modify multiple keyboards simultaneously
+  - Suggest splitting large PRs into focused, incremental changes
+- **Merge Conflicts**: Check for unresolved merge conflicts
+
+### File Naming and Structure
+- **Lowercase Requirement**: All new directories and filenames must be lowercase
+  - Exception: Upstream sources with original uppercase (LUFA, ChibiOS)
+  - Exception: Core files with valid justification
+  - **Reject**: Board designer preference for uppercase is NOT valid justification
+
+### License Headers
+- **Required**: Valid license headers on all `*.c` and `*.h` files
+- **Recommended**: GPL2/GPL3 for consistency
+- **Format**: Check for proper GPL2+ header or SPDX identifier
+  ```c
+  // Copyright 2024 Your Name (@yourgithub)
+  // SPDX-License-Identifier: GPL-2.0-or-later
+  ```
+- **Exception**: Simple assignment-only `rules.mk` files don't need headers
+- **Flag**: Missing or ambiguous license headers (blocks merge)
+
+### QMK Best Practices
+- **Include Guards**: Use `#pragma once` instead of `#ifndef` guards in headers
+- **Abstractions Required**: No low-level GPIO/I2C/SPI functions
+  - Must use QMK abstractions (flag direct hardware access)
+- **Timing Functions**:
+  - Use `wait_ms()` instead of `_delay_ms()`
+  - Remove `#include <util/delay.h>`
+  - Use `timer_read()`, `timer_read32()` from `timer.h`
+- **New Abstractions**: If proposing new abstraction, suggest:
+  1. Prototype in own keyboard first
+  2. Discuss with QMK Collaborators on Discord
+  3. Refactor as separate core change
+  4. Remove the keyboard-specific implementation from board
+
+---
+
+## Keymap PR Reviews
+
+**Scope**: These rules apply to files within `keyboards/*/keymaps/*` subdirectories.
+
+### Note on Personal Keymaps
+- **Policy Change**: Personal keymap submissions no longer accepted
+- **Permitted**: Vendor-specific keymaps only
+  - Naming convention: `default_${vendor}` (e.g., `default_clueboard`)
+  - Can be more feature-rich than stock `default` keymaps
+
+### Keymap Code Standards
+- **Includes**: `#include QMK_KEYBOARD_H` preferred over specific board files
+- **Enums**: Prefer layer enums to `#define`s
+- **Custom Keycodes**: First entry must be `QK_USER`
+- **Formatting**: Check spacing alignment on commas and keycodes (spaces, not tabs)
+- **VIA**: Keymaps should NOT enable VIA
+  - VIA keymaps belong in [VIA QMK Userspace](https://github.com/the-via/qmk_userspace_via)
+
+---
+
+## Keyboard PR Reviews
+
+**Scope**: These rules apply to keyboard-level files in `keyboards/*` directories, excluding files within the `keymaps/` subdirectories. This includes:
+- `info.json` or `keyboard.json` (keyboard root or variant level)
+- `readme.md` (keyboard level)
+- `rules.mk` (keyboard level)
+- `config.h` (keyboard level, not keymap level)
+- `<keyboard>.c` and `<keyboard>.h` files
+- Hardware configuration files (`halconf.h`, `mcuconf.h`, `chconf.h`)
+
+### Branch Targeting
+- **New Keyboards**: Target `master` branch
+  - New additions to `keyboards/` folder submit to `master`
+- **Keyboard Moves**: Must target `develop` branch
+  - Check `data/mappings/keyboard_aliases.hjson` is updated for moves
+- **Keyboard Updates/Refactors**: Must target `develop` to reduce merge conflicts
+- **Data Driven Migration**: Must target `develop`
+
+### info.json and keyboard.json Requirements
+- **Data-Driven Configuration**: Encourage maximum use of `info.json` and `keyboard.json` schema features
+- **Schema Validation**: All `info.json` and `keyboard.json` files must validate against `data/schemas/keyboard.jsonschema`
+  - Use QMK CLI: `qmk lint -kb <keyboard_name>` to validate
+  - Schema defines required fields, data types, and valid values
+  - Check for schema validation errors before submitting PR
+- **Mandatory Elements**:
+  - Valid URL
+  - Valid maintainer
+  - Valid USB VID/PID and device version
+  - Displays correctly in Configurator (Ctrl+Shift+I to preview)
+  - `layout` definitions include matrix positions
+  - Standard layout definitions where applicable
+  - Community Layout macro names when applicable
+  - Microcontroller and bootloader specified
+  - Diode direction (if not using direct pins)
+- **Layout Naming**:
+  - Single layout: Use `LAYOUT` or community layout name
+  - Multiple layouts: Include `LAYOUT_all` + alternate names
+  - Prefer community layout names (e.g., `LAYOUT_tkl_ansi`, `LAYOUT_ortho_4x4`)
+- **Configuration in info.json or keyboard.json** (when applicable):
+  - Direct pin configuration
+  - Backlight, Split keyboard, Encoder, Bootmagic configs
+  - LED Indicator, RGB Light, RGB Matrix configs
+- **Format**: Run `qmk format-json -i` before submitting
+
+### USB VID/PID Uniqueness
+VID+PID combination must be unique across all keyboards. Individual VID or PID values can be reused with different partners.
+**Validation Steps:**
+1. Extract VID and PID from keyboard.json/info.json in the PR
+2. Search for existing usage: `grep -r '"vid".*"0xVVVV"' keyboards/ --include="*.json" | grep -l '"pid".*"0xPPPP"'`
+3. If results found: Check if BOTH VID AND PID match in same file
+   - Both match = **COLLISION** - request different PID
+   - Only one matches = **OK** - different keyboards can share individual values
+4. For keyboard variants/revisions under same keyboard folder:
+   - Different PID recommended for functionally different variants
+   - Same PID acceptable if revisions only differ in hardware routing/pin assignments
+**Quick Reference:**
+- Same PID + Different VID = Valid
+- Same VID + Different PID = Valid
+- Same VID + Same PID = Invalid
+**Review Response:**
+For collision:
+```
+VID+PID collision: 0xVVVV:0xPPPP already used by keyboards/[path]/file.json
++Please assign a different PID. VID can remain the same.
+```
+For uniqueness confirmed:
+```
+VID+PID validation: 0xVVVV:0xPPPP is unique (no collisions found)
+```
+
+### readme.md Requirements
+- **Template**: Must follow [official template](https://github.com/qmk/qmk_firmware/blob/master/data/templates/keyboard/readme.md)
+- **Flash Command**: Present with `:flash` at end
+- **Hardware Link**: Valid availability link (unless handwired)
+  - Private groupbuys acceptable
+  - One-off prototypes will be questioned
+  - Open-source should link to files
+- **Reset Instructions**: Clear bootloader mode instructions
+- **Images Required**:
+  - Keyboard and PCB photos preferred
+  - Must be hosted externally (imgur, etc.)
+  - Direct image links required (not preview pages)
+  - Example: `https://i.imgur.com/vqgE7Ok.jpg` not `https://imgur.com/vqgE7Ok`
+
+### rules.mk Standards
+- **Removed Items**:
+  - `MIDI_ENABLE`, `FAUXCLICKY_ENABLE`, `HD44780_ENABLE`
+  - Size comments like `(-/+size)`
+  - Alternate bootloader lists if one specified
+  - MCU parameter re-definitions matching defaults in `mcu_selection.mk`
+- **Comment Updates**: Change bootloader comments to generic
+- **Forbidden Features at Keyboard Level** (these belong in keymap-level `rules.mk` only):
+  - `COMBO_ENABLE`
+  - `ENCODER_MAP_ENABLE`
+
+### config.h Standards (Keyboard Level)
+- **Prohibited**:
+  - `#define DESCRIPTION`
+  - Magic Key Options, MIDI Options, HD44780 configuration
+  - User preference `#define`s (belong in keymap)
+  - Re-defining default values (`DEBOUNCE`, RGB settings)
+  - Copy/pasted comment blocks explaining features
+  - Commented-out unused defines
+  - `#include "config_common.h"`
+  - `#define MATRIX_ROWS/COLS` (unless custom matrix)
+- **Minimal Code**: Only critical board boot code required
+- **No Vial**: Vial-related files/changes not accepted
+
+### Keyboard Implementation Files
+
+#### `<keyboard>.c`
+- **Remove Empty Functions**: Delete empty or commented-out weak-defined functions
+  - `xxxx_xxxx_kb()`, `xxxx_xxxx_user()` implementations
+- **Migration**: `matrix_init_board()` → `keyboard_pre_init_kb()`
+- **Custom Matrix**: Use `lite` variant when possible for standard debounce
+  - `CUSTOM_MATRIX = lite` preferred
+  - Full custom matrix (`yes`) requires justification
+- **LED Indicators**: Prefer Configuration Options over custom `led_update_*()` implementations
+- **Hardware Configuration**: Basic functionality for OLED, encoders, etc. at keyboard level
+
+#### `<keyboard>.h`
+- **Include**: `#include "quantum.h"` at top
+- **Layout Macros**: Move to `info.json` or `keyboard.json` (no longer in header)
+
+### Default Keymap Standards
+
+**Scope**: These rules specifically apply to files within `keyboards/*/keymaps/default/` directories.
+
+- **Pristine Requirement**: Bare minimum clean slate
+  - No custom keycodes
+  - No advanced features (non-exhaustive list of examples: tap dance, macros)
+  - Basic mod taps and home row mods acceptable when necessary
+  - Standard layouts preferred -- see examples in `layouts/default/` and `layouts/community/`
+- **Removed Examples**: Delete `QMKBEST`/`QMKURL` macros
+- **Tri Layer**: Use Tri Layer feature instead of manual `layer_on/off()` + `update_tri_layer()`
+- **Encoder Map**: Use encoder map feature, `encoder_update_user()` may not be present
+- **No VIA**: Default keymap should not enable VIA
+- **Additional Keymaps**: Example/bells-and-whistles keymaps acceptable in same PR (separate from default)
+
+### Prohibited Files
+- **No VIA JSON**: Belongs in [VIA Keyboard Repo](https://github.com/the-via/keyboards)
+- **No KLE JSON**: Not used within QMK
+- **No Cross-Keyboard Sources**: Don't include files from other keyboard vendors
+  - Exception: Core files (e.g., `drivers/sensors/pmw3360.c`)
+  - Use of vendor-specific code (e.g., `wilba_tech/wt_main.c`) only when keyboard exists in the same enclosing vendor folder (e.g. a `wilba_tech` keyboard)
+  - Multi-board code is candidate for core refactoring when intended for use by multiple vendors
+
+### Wireless Keyboards
+- **Policy**: Wireless/Bluetooth PRs rejected without complete wireless code
+  - Wireless code may not include anything resembling precompiled data such as `*.a` files or other libraries
+  - Firmware blobs are not permitted in raw form or as compiled C-style arrays either.
+  - GPL2+ license requires full source disclosure
+  - Historically abused for VIA compatibility without releasing sources
+  - PRs without wireless capability will be held indefinitely
+  - Existing merged wireless boards from same vendor held until sources provided
+
+### ChibiOS-Specific Requirements
+- **Board Definitions**: Strong preference for existing ChibiOS board definitions
+  - Use equivalent Nucleo boards when possible
+  - Example: STM32L082KZ can use `BOARD = ST_NUCLEO64_L073RZ`
+  - QMK is eliminating custom board definitions due to maintenance burden
+- **New Board Definitions**:
+  - Must NOT be embedded in keyboard PR
+  - Submit as separate Core PR
+  - `board.c` must have standard `__early_init()` and empty `boardInit()`
+  	- Migrate code intended for `__early_init()` → keyboard-local `early_hardware_init_pre/post()`
+    - Migrate code intended for `boardInit()` → keyboard-local `board_init()`
+
+---
+
+## Core PR Reviews
+
+### Targeting and Scope
+- **Branch**: All core PRs must target `develop` branch
+- **Single Focus**: Smallest set of changes per PR
+  - PRs with multiple areas will be asked to split
+  - Keyboard/keymap changes only if affecting base builds or default-like keymaps
+  - Keymap modifications (non-default) should be followup PR after core merge
+  - Large refactoring PRs affecting other keymaps raised separately
+
+### Testing Requirements
+- **New Hardware Support**: Requires test keyboard under `keyboards/handwired/onekey`
+  - New MCUs: Add child keyboard targeting new MCU for build verification
+  - New hardware (displays, matrix, peripherals): Provide associated keymap
+  - Exception: If existing keymap can leverage functionality (consult Collaborators)
+- **Callbacks**: New `_kb`/`_user` callbacks must return `bool` for user override
+- **Unit Tests**: Strongly recommended, may be required
+  - Critical code areas (keycode pipeline) will require tests
+  - Boost confidence in current and future correctness
+
+### Code Quality
+- **Subjective Review**: Other requirements at QMK Collaborators' discretion
+- **Documentation**: Core changes should be well-documented
+
+---
+
+## Automated Review Checklist
+
+When reviewing PRs, check the following systematically:
+
+### File Changes Review
+1. **License headers** on all C/H files (GPL2+ preferred, others must be GPL2+ compatible, SPDX format preferred)
+2. **File naming** lowercase (flag exceptions needing justification)
+3. **Include guards** use `#pragma once`
+4. **No low-level hardware access** (GPIO, I2C, SPI direct register writes)
+5. **Timing abstractions** (`wait_ms()`, `timer_read()` usage)
+
+### info.json and keyboard.json Validation
+1. **Schema Compliance**: `keyboard.json` and `info.json` files validate against `data/schemas/keyboard.jsonschema`
+  - Both files are identical syntax, however the `keyboard.json` dictates a buildable target, `info.json` does not
+   - Run `qmk lint -kb <keyboard>` to check schema validation
+   - Check for proper data types (strings, integers, arrays, objects)
+   - Verify required fields are present
+   - Ensure enum values match allowed options in schema
+2. All mandatory fields present and valid
+3. `qmk format-json -i` has been run (formats and validates)
+4. Layout macros moved from headers
+5. Community layout names used where applicable
+
+### rules.mk Cleanup
+1. Deprecated features removed
+2. No size comments
+3. No keymap-only features at keyboard level
+4. No redundant MCU parameter definitions
+
+### config.h Cleanup
+1. No `DESCRIPTION`, `config_common.h`, or prohibited includes
+2. No default value re-definitions
+3. No commented-out defines or feature documentation blocks
+4. No user preference defines at keyboard level
+
+### Keymap Quality
+1. Default keymaps are pristine (no custom keycodes/advanced features)
+2. No `QMKBEST`/`QMKURL` macros
+3. Encoder map feature used instead of `encoder_update_user()`
+4. Tri Layer feature used for multi-layer access
+5. No VIA enabled in default keymap
+
+### Documentation
+1. readme.md follows template
+2. Flash command present with `:flash`
+3. Reset instructions clear
+4. External image hosting (direct links)
+5. Valid hardware availability link
+
+### Code Organization
+1. Empty weak-defined functions removed from `<keyboard>.c`
+2. Proper migration of init functions
+3. No cross-vendor source files
+4. No VIA/KLE JSON files
+
+### Branch and Scope
+1. Not submitted from submitter's own `master` branch (use feature branches)
+2. PR is focused on single change
+3. Targets correct branch:
+   - `master` for new keyboard additions
+   - `develop` for keyboard updates/refactors/moves and core changes
+4. No merge conflicts
+
+---
+
+## Review Response Templates
+
+### For source master branch usage:
+```
+⚠️ This PR appears to be submitted from your own `master` branch. For future PRs, we recommend using feature branches instead of committing to your `master`. This makes it easier to keep your fork updated and manage multiple PRs.
+
+See: [Best Practices: Your Fork's Master](https://docs.qmk.fm/newbs_git_using_your_master_branch)
+```
+
+### For incorrect target branch:
+```
+❌ This PR targets the wrong branch:
+- **New keyboard additions** should target `master`
+- **Keyboard updates/refactors/moves** should target `develop`
+- **Core changes** should target `develop`
+
+Please change the target branch accordingly.
+```
+
+### For missing license headers:
+```
+❌ Missing GPL-compatible license headers on the following files:
+- [list files]
+
+Please add GPL2+ headers (GPL2/GPL3 recommended). Example:
+\`\`\`c
+// Copyright 2024 Your Name (@yourgithub)
+// SPDX-License-Identifier: GPL-2.0-or-later
+\`\`\`
+```
+
+### For non-lowercase filenames:
+```
+❌ The following files/directories must be lowercase:
+- [list files]
+
+Exception: Only valid if from upstream sources (LUFA, ChibiOS) or justified by core consistency.
+```
+
+### For config.h violations:
+```
+⚠️ Found prohibited config.h elements:
+- [list specific issues: DESCRIPTION, default value re-definitions, etc.]
+
+Please remove these and refer to [Data Driven Configuration](https://docs.qmk.fm/data_driven_config).
+```
+
+### For info.json or keyboard.json issues:
+```
+⚠️ info.json or keyboard.json needs attention:
+- [list missing mandatory fields]
+- Please run: \`qmk format-json -i path/to/info.json\` (or keyboard.json)
+- Validate with: \`qmk lint -kb <keyboard_name>\`
+```
+
+### For schema validation errors:
+```
+❌ Schema validation failed for info.json or keyboard.json:
+- [list specific validation errors from schema]
+- Check `data/schemas/keyboard.jsonschema` for valid field definitions
+- Common issues:
+  - Invalid data types (e.g., string instead of integer)
+  - Missing required fields
+  - Invalid enum values
+  - Incorrectly formatted pin definitions
+```
+
+### For non-pristine default keymap:
+```
+⚠️ Default keymap should be pristine (clean slate for users):
+- Remove: [custom keycodes/tap dance/macros/etc.]
+- Keep it minimal with standard layouts where possible
+
+Consider moving advanced features to a separate example keymap.
+```
+
+---
+
+## Notes for GitHub Copilot
+
+- Focus reviews on **objective checklist items** that can be automatically verified
+- Flag **definite violations** with ❌
+- Suggest improvements for **recommendations** with ⚠️
+- **Provide specific file/line references** when flagging issues
+- **Link to relevant QMK documentation** for each issue
+- **Prioritize blocking issues** (license, merge conflicts, branch policy)
+- **Be constructive**: Suggest fixes, not just problems
+- **Acknowledge trade-offs**: Some guidelines have valid exceptions
+
+This is meant as a **first-pass review** to catch common issues before human review. Complex architectural decisions, code quality, and subjective assessments still require human QMK Collaborator review.

.github/workflows/api.yml

@@ -25,7 +25,7 @@ jobs:
     if: github.repository == 'qmk/qmk_firmware'
 
     steps:
-    - uses: actions/checkout@v5
+    - uses: actions/checkout@v6
       with:
         fetch-depth: 1
         persist-credentials: false

.github/workflows/auto_approve.yml

@@ -4,7 +4,7 @@ permissions: {}
 
 on:
   schedule:
-    - cron: "*/5 * * * *"
+    - cron: "*/30 * * * *"
 
 jobs:
   automatic_approve:

.github/workflows/auto_tag.yml

@@ -28,7 +28,7 @@ jobs:
     if: github.repository == 'qmk/qmk_firmware'
 
     steps:
-    - uses: actions/checkout@v5
+    - uses: actions/checkout@v6
       with:
         fetch-depth: 0
 

.github/workflows/bootstrap_testing.yml

@@ -0,0 +1,289 @@
+name: Bootstrap Script Testing
+
+on:
+  push:
+    branches: [master, develop, xap]
+    paths:
+    - 'util/env-bootstrap.sh'
+    - '.github/workflows/bootstrap_testing.yml'
+  pull_request:
+    paths:
+    - 'util/env-bootstrap.sh'
+    - '.github/workflows/bootstrap_testing.yml'
+  workflow_dispatch:
+
+permissions:
+  contents: read
+
+jobs:
+  prep:
+    runs-on: ubuntu-latest
+
+    outputs:
+      any_changed: ${{ steps.file_changes.outputs.any_changed }}
+
+    steps:
+    - name: Get changed files
+      id: file_changes
+      if: ${{ github.event_name == 'pull_request' }}
+      uses: tj-actions/changed-files@v47
+      with:
+        use_rest_api: true
+        files: |
+          util/env-bootstrap.sh
+          .github/workflows/bootstrap_testing.yml
+
+  bootstrap-test-linux:
+    name: Bootstrap (Linux)
+
+    needs: prep
+    if: ${{ github.event_name != 'pull_request' || needs.prep.outputs.any_changed == 'true' }}
+
+    runs-on: ubuntu-latest
+
+    strategy:
+      fail-fast: false
+      matrix:
+        distribution:
+          # Ubuntu/Debian based
+          - debian:11
+          - debian:12
+          - debian:13
+          - ubuntu:20.04
+          - ubuntu:22.04
+          - ubuntu:24.04
+
+          # RHEL/CentOS/Fedora based
+          - fedora:41
+          - fedora:42
+          - fedora:43
+          - rockylinux:8
+          - rockylinux:9
+          - rockylinux/rockylinux:10
+          - almalinux:8
+          - almalinux:9
+          - almalinux:10
+
+          # OpenSUSE based (we skip Tumbleweed as it has issues with package versions between pattern installs and other dependencies preinstalled into the base container)
+          - opensuse/leap:latest
+
+          # Gentoo-based
+          - gentoo/stage3:latest
+
+          # Arch based
+          - archlinux:latest
+          - cachyos/cachyos:latest
+          - manjarolinux/base:latest
+
+    container:
+      image: ${{ matrix.distribution }}
+      options: --privileged
+
+    steps:
+      - name: Install base dependencies
+        run: |
+          # Attempt to run the package installation up to 10 times to mitigate transient network issues
+          for n in $(seq 1 10); do
+            {
+              echo "Attempt #$n of 10 to install base dependencies:"
+              case "${{ matrix.distribution }}" in
+                *ubuntu*|*debian*)
+                  apt-get update
+                  apt-get install -y sudo git passwd
+                  ;;
+                *fedora*|*rockylinux*|*almalinux*)
+                  dnf install -y sudo git passwd findutils  # findutils=xargs
+                  ;;
+                *suse*)
+                  zypper --non-interactive refresh
+                  zypper --non-interactive install sudo git shadow findutils  # findutils=xargs
+                  ;;
+                *gentoo*)
+                  emerge-webrsync
+                  emerge --noreplace --ask=n sudo dev-vcs/git shadow findutils  # findutils=xargs
+                  ;;
+                *archlinux*|*cachyos*|*manjaro*)
+                  pacman -Syu --noconfirm
+                  pacman -S --noconfirm sudo git
+                  ;;
+              esac
+            } && break || sleep 10
+          done
+
+          # Fix PAM configuration for sudo in containers
+          # Fix /etc/shadow permissions - common issue in container environments
+          chmod 640 /etc/shadow || chmod 400 /etc/shadow || true
+
+          # Disable problematic PAM modules that commonly fail in RHEL-like containers
+          sed -i 's/^session.*pam_systemd.so/#&/' /etc/pam.d/sudo || true
+          sed -i 's/^session.*pam_loginuid.so/#&/' /etc/pam.d/sudo || true
+
+          # Ensure proper sudoers configuration
+          echo 'Defaults !requiretty' >> /etc/sudoers
+          echo 'Defaults secure_path="/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin"' >> /etc/sudoers
+
+      - name: Checkout repository
+        uses: actions/checkout@v6
+        with:
+          fetch-depth: 1
+          submodules: recursive
+          path: qmk_firmware
+
+      - name: Create test user
+        run: |
+          # Create a test user for the bootstrap script
+          useradd -m -s /bin/bash -U testuser
+          echo 'testuser:testpassword' | chpasswd || true
+          
+          # Configure passwordless sudo
+          echo "root ALL=(ALL) NOPASSWD:ALL" >> /etc/sudoers  # some distros complain about root not being in sudoers
+          echo "testuser ALL=(ALL) NOPASSWD:ALL" >> /etc/sudoers
+          
+          # Test sudo functionality
+          sudo -u testuser whoami || echo "Sudo test failed, but continuing..."
+
+      - name: Move QMK repository to test user home
+        run: |
+          # Add upstream remote to the cloned repository so `qmk doctor` doesn't flag a warning
+          git -C qmk_firmware remote add upstream https://github.com/qmk/qmk_firmware.git
+          # Move the QMK repository to the test user's home directory
+          mv qmk_firmware /home/testuser/qmk_firmware
+          chown -R testuser:testuser /home/testuser/qmk_firmware
+
+      - name: Run bootstrap script
+        env:
+          GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
+        run: |
+          # Ensure the bootstrap script can access sudo
+          sudo -u testuser --preserve-env=GITHUB_TOKEN bash -c "
+            export CONFIRM=1
+            export PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin
+            cd /home/testuser
+            bash /home/testuser/qmk_firmware/util/env-bootstrap.sh
+          "
+
+      - name: Install dependencies
+        run: |
+          sudo -u testuser bash -c "
+            /home/testuser/.local/share/uv/tools/qmk/bin/python -m pip install -r /home/testuser/qmk_firmware/requirements.txt
+          "
+
+      - name: Test QMK CLI
+        run: |
+          sudo -u testuser bash -c "
+            export PATH=/home/testuser/.local/bin:\$PATH
+            cd /home/testuser
+            qmk setup -y -H /home/testuser/qmk_firmware  # setup implies doctor, no need to run it separately
+            cd /home/testuser/qmk_firmware
+            qmk mass-compile -j $(nproc) -e DUMP_CI_METADATA=yes -f 'keyboard_name==*onekey*' -km reset -p || touch .failed  # Compile a bunch of different platforms
+          "
+          
+          cd /home/testuser/qmk_firmware
+          ./util/ci/generate_failure_markdown.sh > $GITHUB_STEP_SUMMARY || true
+          [ ! -e .failed ] || exit 1
+
+  bootstrap-test-macos:
+    name: Bootstrap (macOS)
+
+    needs: prep
+    if: ${{ github.event_name != 'pull_request' || needs.prep.outputs.any_changed == 'true' }}
+
+    strategy:
+      fail-fast: false
+      matrix:
+        os:
+          - macos-14        # Apple Silicon ARM64
+          - macos-15        # Apple Silicon ARM64
+          - macos-15-intel  # Intel x64
+          - macos-26        # Apple Silicon ARM64
+
+    runs-on: ${{ matrix.os }}
+
+    steps:
+      - name: Checkout repository
+        uses: actions/checkout@v6
+        with:
+          fetch-depth: 1
+          submodules: recursive
+
+      - name: Run bootstrap script
+        env:
+          GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
+        run: |
+          # Add upstream remote to the cloned repository so `qmk doctor` doesn't flag a warning
+          git remote add upstream https://github.com/qmk/qmk_firmware.git
+          # Run the bootstrap script
+          export CONFIRM=1
+          sh ./util/env-bootstrap.sh
+
+      - name: Install dependencies
+        run: |
+          $HOME/.local/share/uv/tools/qmk/bin/python -m pip install -r requirements.txt
+
+      - name: Test QMK CLI
+        run: |
+          # Add QMK CLI to PATH (bootstrap script installs it to ~/.local/bin on macOS)
+          export PATH="$HOME/.local/bin:$PATH"
+          qmk setup -y -H .  # setup implies doctor, no need to run it separately
+          qmk mass-compile -j $(sysctl -n hw.ncpu) -e DUMP_CI_METADATA=yes -f 'keyboard_name==*onekey*' -km reset || touch .failed  # Compile a bunch of different platforms
+          
+          ./util/ci/generate_failure_markdown.sh > $GITHUB_STEP_SUMMARY || true
+          [ ! -e .failed ] || exit 1
+
+  bootstrap-test-windows:
+    name: Bootstrap (Windows)
+
+    needs: prep
+    if: ${{ github.event_name != 'pull_request' || needs.prep.outputs.any_changed == 'true' }}
+
+    strategy:
+      fail-fast: false
+      matrix:
+        msys-variant:
+          - mingw64
+          - clang64
+          - ucrt64
+
+    runs-on: windows-latest
+    defaults:
+      run:
+        shell: msys2 {0}
+
+    steps:
+      - name: Install MSYS2
+        uses: msys2/setup-msys2@v2
+        with:
+          msystem: ${{ matrix.msys-variant }}
+          pacboy: >-
+            git:
+
+      - name: Checkout repository
+        uses: actions/checkout@v6
+        with:
+          fetch-depth: 1
+          submodules: recursive
+
+      - name: Run bootstrap script
+        env:
+          GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
+        run: |
+          # Add upstream remote to the cloned repository so `qmk doctor` doesn't flag a warning
+          git remote add upstream https://github.com/qmk/qmk_firmware.git
+          # Run the bootstrap script
+          export CONFIRM=1
+          sh ./util/env-bootstrap.sh
+
+      - name: Install dependencies
+        run: |
+          /opt/uv/tools/qmk/Scripts/python -m pip install -r requirements.txt
+
+      - name: Test QMK CLI
+        run: |
+          # Add QMK CLI to PATH (bootstrap script installs it to /opt/uv/tools/bin on Windows MSYS2)
+          export PATH="/opt/uv/tools/bin:$PATH"
+          qmk setup -y -H .  # setup implies doctor, no need to run it separately
+          qmk mass-compile -j $(nproc) -e DUMP_CI_METADATA=yes -f 'keyboard_name==*onekey*' -km reset || touch .failed  # Compile a bunch of different platforms
+          
+          ./util/ci/generate_failure_markdown.sh > $GITHUB_STEP_SUMMARY || true
+          [ ! -e .failed ] || exit 1
+

.github/workflows/ci_build_major_branch.yml

@@ -32,29 +32,36 @@ jobs:
     container: ghcr.io/qmk/qmk_cli
 
     outputs:
+      keymaps: ${{ steps.generate_slice_length.outputs.keymaps }}
       slice_length: ${{ steps.generate_slice_length.outputs.slice_length }}
 
     steps:
-      - name: Install prerequisites
-        run: |
-          apt-get update
-          apt-get install -y jq
-
       - name: Disable safe.directory check
         run: |
           git config --global --add safe.directory '*'
 
       - name: Checkout QMK Firmware
-        uses: actions/checkout@v5
+        uses: actions/checkout@v6
+
+      - name: Install dependencies
+        run: pip3 install -r requirements-dev.txt
 
       - name: Determine concurrency
         id: generate_slice_length
+        shell: 'bash {0}'
         run: |
-          target_count=$( {
-            qmk find -km default 2>/dev/null
-            qmk find -km xap 2>/dev/null
-          } | sort | uniq | wc -l)
+          targets=()
+          target_count=0
+          for target in "default" "xap"; do
+              count=$(qmk find -km $target 2>/dev/null | wc -l)
+              if [ $count -gt 0 ]; then
+                  target_count=$(($target_count + $count))
+                  targets+=($target)
+              fi
+          done
+          keymaps=$(jq -c -n '$ARGS.positional' --args "${targets[@]}")
           slice_length=$((target_count / ($CONCURRENT_JOBS - 1))) # Err on the side of caution
+          echo "keymaps=$keymaps" >> $GITHUB_OUTPUT
           echo "slice_length=$slice_length" >> $GITHUB_OUTPUT
 
   build_targets:
@@ -63,7 +70,7 @@ jobs:
     strategy:
       fail-fast: false
       matrix:
-        keymap: [default, xap]
+        keymap: ${{ fromJson(needs.determine_concurrency.outputs.keymaps) }}
     uses: ./.github/workflows/ci_build_major_branch_keymap.yml
     with:
       branch: ${{ inputs.branch || github.ref_name }}
@@ -82,12 +89,12 @@ jobs:
           git config --global --add safe.directory '*'
 
       - name: Checkout QMK Firmware
-        uses: actions/checkout@v5
+        uses: actions/checkout@v6
         with:
           fetch-depth: 0
 
       - name: Download firmwares
-        uses: actions/download-artifact@v5
+        uses: actions/download-artifact@v8
         with:
           pattern: firmware-*
           path: .
@@ -125,14 +132,7 @@ jobs:
           SOURCE_DIR: .
           DEST_DIR: ${{ inputs.branch || github.ref_name }}/latest
 
-      - name: Check if failure marker file exists
-        id: check_failure_marker
-        uses: andstor/file-existence-action@v3
-        with:
-          files: ./.failed
-
       - name: Fail build if needed
-        if: steps.check_failure_marker.outputs.files_exists == 'true'
         run: |
           # Exit with failure if the compilation stage failed
-          exit 1
+          [ ! -e .failed ] || exit 1

.github/workflows/ci_build_major_branch_keymap.yml

@@ -27,30 +27,29 @@ jobs:
       targets: ${{ steps.generate_targets.outputs.targets }}
 
     steps:
-      - name: Install prerequisites
-        run: |
-          apt-get update
-          apt-get install -y jq
-
       - name: Disable safe.directory check
         run: |
           git config --global --add safe.directory '*'
 
       - name: Checkout QMK Firmware
-        uses: actions/checkout@v5
+        uses: actions/checkout@v6
+
+      - name: Install dependencies
+        run: pip3 install -r requirements-dev.txt
 
       - name: Generate build targets
+        shell: 'bash {0}'
         id: generate_targets
         run: |
           { # Intentionally use `shuf` here so that we share manufacturers across all build groups -- some have a lot of ARM-based boards which inherently take longer
             counter=0
             echo -n '{'
-            qmk find -km ${{ inputs.keymap }} 2>/dev/null | sort | uniq | shuf | xargs -L${{ inputs.slice_length }} | while IFS=$'\n' read target ; do
+            qmk find -km ${{ inputs.keymap }} 2>/dev/null | sort | uniq | shuf --random-source=<(openssl enc -aes-256-ctr -pass pass:qmk -nosalt </dev/zero 2>/dev/null) | xargs -L${{ inputs.slice_length }} | while IFS=$'\n' read target ; do
                 if [ $counter -gt 0 ]; then
                     echo -n ','
                 fi
                 counter=$((counter+1))
-                printf "\"group %02d\":{" $counter
+                printf "\"group-%02d\":{" $counter
                 echo -n '"targets":"'
                 echo $target | tr ' ' '\n' | sort | uniq | xargs echo -n
                 echo -n '"}'
@@ -62,7 +61,7 @@ jobs:
           echo "targets=$(jq -c 'keys' targets.json)" >> $GITHUB_OUTPUT
 
       - name: Upload targets json
-        uses: actions/upload-artifact@v4
+        uses: actions/upload-artifact@v7
         with:
           name: targets-${{ inputs.keymap }}
           path: targets.json
@@ -74,45 +73,76 @@ jobs:
     container: ghcr.io/qmk/qmk_cli
     continue-on-error: true
 
+    env:
+      CCACHE_CONFIGPATH: ~/.cache
+
     strategy:
       matrix:
         target: ${{ fromJson(needs.generate_targets.outputs.targets) }}
 
     steps:
-      - name: Install prerequisites
-        run: |
-          apt-get update
-          apt-get install -y jq
-
       - name: Disable safe.directory check
         run: |
           git config --global --add safe.directory '*'
 
       - name: Checkout QMK Firmware
-        uses: actions/checkout@v5
+        uses: actions/checkout@v6
+        with:
+          submodules: recursive
+
+      - name: Install dependencies
+        run: pip3 install -r requirements-dev.txt
 
       - name: Get target definitions
-        uses: actions/download-artifact@v5
+        uses: actions/download-artifact@v8
         with:
           name: targets-${{ inputs.keymap }}
           path: .
 
-      - name: Deploy submodules
-        run: |
-          qmk git-submodule -f
-
       - name: Dump targets
         run: |
           jq -r '.["${{ matrix.target }}"].targets' targets.json | tr ' ' '\n' | sort
 
+      - name: Restore Cache
+        id: cache
+        uses: actions/cache/restore@v5
+        with:
+          path: ${{ env.CCACHE_CONFIGPATH }}
+          key: compile-${{ inputs.keymap }}-${{ matrix.target }}
+
       - name: Build targets
         continue-on-error: true
         run: |
-          export NCPUS=$(( $(nproc 2>/dev/null || sysctl -n hw.ncpu 2>/dev/null || getconf _NPROCESSORS_ONLN 2>/dev/null) -1 ))
-          qmk mass-compile -t -j $NCPUS -e DUMP_CI_METADATA=yes $(jq -r '.["${{ matrix.target }}"].targets' targets.json) || touch .failed
+          targets=$(jq -r '.["${{ matrix.target }}"].targets' targets.json | tr ' ' '\n' | sort)
+          if [ -z "${targets}" ]; then
+            echo "Zero build targets detected"
+            exit 0
+          fi
+          qmk mass-compile -t -j $(nproc) -e DUMP_CI_METADATA=yes -e USE_CCACHE=yes $targets || touch .failed
+
+      - name: Dump ccache stats
+        run: |
+          ccache -s
+
+      # Delete the old cache on hit to emulate a cache update. See https://github.com/actions/cache/issues/342.
+      - name: Delete old cache
+        env:
+          GH_TOKEN: ${{ github.token }}
+        if: steps.cache.outputs.cache-hit
+        run: |
+          count=$(gh cache list --ref ${{ github.ref }} --key ${{ steps.cache.outputs.cache-primary-key }} --json id | jq length)
+          if [ $count -gt 0 ]; then
+            gh cache delete --ref ${{ github.ref }} ${{ steps.cache.outputs.cache-primary-key }}
+          fi
+
+      - name: Save Cache
+        uses: actions/cache/save@v5
+        with:
+          path: ${{ env.CCACHE_CONFIGPATH }}
+          key: compile-${{ inputs.keymap }}-${{ matrix.target }}
 
       - name: Upload binaries
-        uses: actions/upload-artifact@v4
+        uses: actions/upload-artifact@v7
         with:
           name: firmware-${{ inputs.keymap }}-${{ matrix.target }}
           if-no-files-found: ignore
@@ -136,17 +166,17 @@ jobs:
 
     steps:
       - name: Checkout QMK Firmware
-        uses: actions/checkout@v5
+        uses: actions/checkout@v6
 
       - name: Download firmwares
-        uses: actions/download-artifact@v5
+        uses: actions/download-artifact@v8
         with:
           pattern: firmware-${{ inputs.keymap }}-*
           path: .
           merge-multiple: true
 
       - name: Upload all firmwares
-        uses: actions/upload-artifact@v4
+        uses: actions/upload-artifact@v7
         with:
           name: firmware-${{ inputs.keymap }}
           if-no-files-found: ignore
@@ -165,7 +195,7 @@ jobs:
           truncate --size='<960K' $GITHUB_STEP_SUMMARY || true
 
       - name: Delete temporary build artifacts
-        uses: geekyeggo/delete-artifact@v5
+        uses: geekyeggo/delete-artifact@v6
         with:
           name: |
             firmware-${{ inputs.keymap }}-*

.github/workflows/cli.yml

@@ -24,11 +24,12 @@ jobs:
     - name: Disable safe.directory check
       run : git config --global --add safe.directory '*'
 
-    - uses: actions/checkout@v5
+    - uses: actions/checkout@v6
       with:
         submodules: recursive
 
     - name: Install dependencies
       run: pip3 install -r requirements-dev.txt
+
     - name: Run tests
       run: qmk pytest

.github/workflows/develop_docs.yml

@@ -0,0 +1,34 @@
+name: Generate Develop Docs
+
+permissions:
+  contents: write
+
+on:
+  push:
+    branches:
+    - develop
+    paths:
+    - 'builddefs/docsgen/**'
+    - 'tmk_core/**'
+    - 'quantum/**'
+    - 'platforms/**'
+    - 'docs/**'
+    - '.github/workflows/docs.yml'
+
+jobs:
+  generate:
+    runs-on: ubuntu-latest
+
+    steps:
+    - name: Deploy Develop
+      if: ${{ github.repository == 'qmk/qmk_firmware' }}
+      uses: actions/github-script@v9
+      with:
+        github-token: ${{ secrets.QMK_BOT_TOKEN }}
+        script: |
+          const result = await github.rest.actions.createWorkflowDispatch({
+            owner: 'qmk',
+            repo: 'qmk_docs_devel',
+            workflow_id: 'develop.yml',
+            ref: 'main',
+          })

.github/workflows/develop_update.yml

@@ -15,7 +15,7 @@ jobs:
     if: github.repository == 'qmk/qmk_firmware'
 
     steps:
-    - uses: actions/checkout@v5
+    - uses: actions/checkout@v6
       with:
         token: ${{ secrets.QMK_BOT_TOKEN }}
         fetch-depth: 0

.github/workflows/docs.yml

@@ -30,14 +30,15 @@ jobs:
     container: ghcr.io/qmk/qmk_cli
 
     steps:
-    - uses: actions/checkout@v5
+    - uses: actions/checkout@v6
       with:
         fetch-depth: 1
 
     - name: Install dependencies
+      run: pip3 install -r requirements-dev.txt
+
+    - name: Install nvm
       run: |
-        apt-get update && apt-get install -y rsync doxygen
-        # install nvm
         touch $HOME/.bashrc
         wget -qO- https://raw.githubusercontent.com/nvm-sh/nvm/v0.39.7/install.sh | bash
 
@@ -56,7 +57,7 @@ jobs:
 
     - name: Deploy
       if: ${{ github.event_name == 'push' && github.repository == 'qmk/qmk_firmware' }}
-      uses: JamesIves/github-pages-deploy-action@v4.7.3
+      uses: JamesIves/github-pages-deploy-action@v4.8.0
       with:
           token: ${{ secrets.GITHUB_TOKEN }}
           branch: gh-pages

.github/workflows/feature_branch_update.yml

@@ -21,7 +21,7 @@ jobs:
         - riot
 
     steps:
-    - uses: actions/checkout@v5
+    - uses: actions/checkout@v6
       with:
         token: ${{ secrets.QMK_BOT_TOKEN }}
         fetch-depth: 0

.github/workflows/format.yml

@@ -26,7 +26,7 @@ jobs:
     - name: Disable safe.directory check
       run : git config --global --add safe.directory '*'
 
-    - uses: actions/checkout@v5
+    - uses: actions/checkout@v6
       with:
         fetch-depth: 0
 

.github/workflows/format_push.yml

@@ -19,7 +19,7 @@ jobs:
     - name: Disable safe.directory check
       run : git config --global --add safe.directory '*'
 
-    - uses: actions/checkout@v5
+    - uses: actions/checkout@v6
       with:
         fetch-depth: 0
 
@@ -47,7 +47,7 @@ jobs:
         git config user.email 'hello@qmk.fm'
 
     - name: Create Pull Request
-      uses: peter-evans/create-pull-request@v7
+      uses: peter-evans/create-pull-request@v8
       if: ${{ github.repository == 'qmk/qmk_firmware'}}
       with:
         token: ${{ secrets.QMK_BOT_TOKEN }}

.github/workflows/lint.yml

@@ -18,7 +18,7 @@ jobs:
     - name: Disable safe.directory check
       run : git config --global --add safe.directory '*'
 
-    - uses: actions/checkout@v5
+    - uses: actions/checkout@v6
       with:
         fetch-depth: 0
 
@@ -31,7 +31,7 @@ jobs:
       with:
         use_rest_api: true
 
-    - name: Print info
+    - name: Print git info
       run: |
         git rev-parse --short HEAD
         echo ${{ github.event.pull_request.base.sha }}
@@ -57,7 +57,7 @@ jobs:
           if [[ $KEYMAP_ONLY -gt 0 ]]; then
             echo "linting ${KB}"
 
-            qmk lint --keyboard ${KB} && qmk info -l --keyboard ${KB}
+            qmk lint --strict --keyboard ${KB} && qmk info -l --keyboard ${KB}
             exit_code=$(($exit_code + $?))
           fi
         done
@@ -78,10 +78,21 @@ jobs:
         fi
         exit $exit_code
 
-    - name: Verify keyboard aliases
+    - name: Reset git repo
       if: always()
       shell: 'bash {0}'
       run: |
         git reset --hard
         git clean -xfd
+
+    - name: Verify keyboard targets
+      if: always()
+      shell: 'bash {0}'
+      run: |
+        qmk ci-validate-keyboard-targets
+
+    - name: Verify keyboard aliases
+      if: always()
+      shell: 'bash {0}'
+      run: |
         qmk ci-validate-aliases

.github/workflows/regen.yml

@@ -8,6 +8,9 @@ on:
     paths:
     - 'data/constants/**'
     - 'lib/python/**'
+    - 'quantum/rgblight/rgblight_breathe_table.h'
+    - 'quantum/keycodes.h'
+    - 'quantum/keymap_extras/**'
 
 jobs:
   regen:
@@ -19,7 +22,10 @@ jobs:
     - name: Disable safe.directory check
       run : git config --global --add safe.directory '*'
 
-    - uses: actions/checkout@v5
+    - uses: actions/checkout@v6
+
+    - name: Install dependencies
+      run: pip3 install -r requirements-dev.txt
 
     - name: Run qmk generators
       run: |

.github/workflows/regen_push.yml

@@ -19,7 +19,10 @@ jobs:
     - name: Disable safe.directory check
       run : git config --global --add safe.directory '*'
 
-    - uses: actions/checkout@v5
+    - uses: actions/checkout@v6
+
+    - name: Install dependencies
+      run: pip3 install -r requirements-dev.txt
 
     - name: Run qmk generators
       run: |
@@ -34,7 +37,7 @@ jobs:
         git config user.email 'hello@qmk.fm'
 
     - name: Create Pull Request
-      uses: peter-evans/create-pull-request@v7
+      uses: peter-evans/create-pull-request@v8
       if: ${{ github.repository == 'qmk/qmk_firmware'}}
       with:
         token: ${{ secrets.QMK_BOT_TOKEN }}

.github/workflows/unit_test.yml

@@ -11,6 +11,7 @@ on:
   pull_request:
     paths:
     - 'builddefs/**'
+    - '!builddefs/docsgen/**'
     - 'quantum/**'
     - 'platforms/**'
     - 'tmk_core/**'
@@ -26,10 +27,12 @@ jobs:
     container: ghcr.io/qmk/qmk_cli
 
     steps:
-    - uses: actions/checkout@v5
+    - uses: actions/checkout@v6
       with:
         submodules: recursive
+
     - name: Install dependencies
       run: pip3 install -r requirements-dev.txt
+
     - name: Run tests
-      run: qmk test-c
+      run: qmk test-c -j $(nproc)

.gitignore

@@ -65,6 +65,8 @@ cmake-build-debug
 CMakeLists.txt
 *.pdf
 *.zip
+.env
+.envrc
 
 # Let these ones be user specific, since we have so many different configurations
 *.code-workspace
@@ -95,6 +97,11 @@ tags
 *.mpeg
 *.ttf
 *.otf
+# Un-ignore limited image file formats in docs
+!docs/public/**.gif
+!docs/public/**.jpg
+!docs/public/**.jpeg
+!docs/public/**.png
 
 # Things Travis sees
 /.vs

Makefile

@@ -38,14 +38,17 @@ $(info QMK Firmware $(QMK_VERSION))
 endif
 endif
 
-# Try to determine userspace from qmk config, if set.
-ifeq ($(QMK_USERSPACE),)
-    QMK_USERSPACE = $(shell qmk config -ro user.overlay_dir | cut -d= -f2 | sed -e 's@^None$$@@g')
-endif
-
 # Determine which qmk cli to use
 QMK_BIN := qmk
 
+# Try to determine userspace from qmk config, if set. Handle direct query on qmk_cli>=1.1.7
+# falling back to legacy method of only supporting user.overlay_dir config
+# sort is used to buffer 'qmk env' output and avoid BrokenPipeError errors
+export override QMK_USERSPACE := $(shell \
+    $(QMK_BIN) env | sort | grep -q QMK_USERSPACE \
+        && $(QMK_BIN) env QMK_USERSPACE \
+        || $(QMK_BIN) config -ro user.overlay_dir | cut -d= -f2 | sed -e 's@^None$$@@g')
+
 # avoid 'Entering|Leaving directory' messages
 MAKEFLAGS += --no-print-directory
 
@@ -190,41 +193,9 @@ endef
 # Parses a rule in the format <keymap>:<target>
 # the keyboard is already known when entering this function
 define PARSE_KEYBOARD
-    # If we want to compile the default subproject, then we need to
-    # include the correct makefile to determine the actual name of it
     CURRENT_KB := $1
 
-    # 5/4/3/2/1
-    KEYBOARD_FOLDER_PATH_1 := $$(CURRENT_KB)
-    KEYBOARD_FOLDER_PATH_2 := $$(patsubst %/,%,$$(dir $$(KEYBOARD_FOLDER_PATH_1)))
-    KEYBOARD_FOLDER_PATH_3 := $$(patsubst %/,%,$$(dir $$(KEYBOARD_FOLDER_PATH_2)))
-    KEYBOARD_FOLDER_PATH_4 := $$(patsubst %/,%,$$(dir $$(KEYBOARD_FOLDER_PATH_3)))
-    KEYBOARD_FOLDER_PATH_5 := $$(patsubst %/,%,$$(dir $$(KEYBOARD_FOLDER_PATH_4)))
-
-    KEYMAPS :=
-    # get a list of all keymaps
-    KEYMAPS += $$(notdir $$(patsubst %/.,%,$$(wildcard $(ROOT_DIR)/keyboards/$$(KEYBOARD_FOLDER_PATH_1)/keymaps/*/.)))
-    KEYMAPS += $$(notdir $$(patsubst %/.,%,$$(wildcard $(ROOT_DIR)/keyboards/$$(KEYBOARD_FOLDER_PATH_2)/keymaps/*/.)))
-    KEYMAPS += $$(notdir $$(patsubst %/.,%,$$(wildcard $(ROOT_DIR)/keyboards/$$(KEYBOARD_FOLDER_PATH_3)/keymaps/*/.)))
-    KEYMAPS += $$(notdir $$(patsubst %/.,%,$$(wildcard $(ROOT_DIR)/keyboards/$$(KEYBOARD_FOLDER_PATH_4)/keymaps/*/.)))
-    KEYMAPS += $$(notdir $$(patsubst %/.,%,$$(wildcard $(ROOT_DIR)/keyboards/$$(KEYBOARD_FOLDER_PATH_5)/keymaps/*/.)))
-
-    ifneq ($(QMK_USERSPACE),)
-        KEYMAPS += $$(notdir $$(patsubst %/.,%,$$(wildcard $(QMK_USERSPACE)/keyboards/$$(KEYBOARD_FOLDER_PATH_1)/keymaps/*/.)))
-        KEYMAPS += $$(notdir $$(patsubst %/.,%,$$(wildcard $(QMK_USERSPACE)/keyboards/$$(KEYBOARD_FOLDER_PATH_2)/keymaps/*/.)))
-        KEYMAPS += $$(notdir $$(patsubst %/.,%,$$(wildcard $(QMK_USERSPACE)/keyboards/$$(KEYBOARD_FOLDER_PATH_3)/keymaps/*/.)))
-        KEYMAPS += $$(notdir $$(patsubst %/.,%,$$(wildcard $(QMK_USERSPACE)/keyboards/$$(KEYBOARD_FOLDER_PATH_4)/keymaps/*/.)))
-        KEYMAPS += $$(notdir $$(patsubst %/.,%,$$(wildcard $(QMK_USERSPACE)/keyboards/$$(KEYBOARD_FOLDER_PATH_5)/keymaps/*/.)))
-    endif
-
-    KEYBOARD_LAYOUTS := $(shell $(QMK_BIN) list-layouts --keyboard $1)
-    LAYOUT_KEYMAPS :=
-    $$(foreach LAYOUT,$$(KEYBOARD_LAYOUTS),$$(eval LAYOUT_KEYMAPS += $$(notdir $$(patsubst %/.,%,$$(wildcard $(ROOT_DIR)/layouts/*/$$(LAYOUT)/*/.)))))
-    ifneq ($(QMK_USERSPACE),)
-        $$(foreach LAYOUT,$$(KEYBOARD_LAYOUTS),$$(eval LAYOUT_KEYMAPS += $$(notdir $$(patsubst %/.,%,$$(wildcard $(QMK_USERSPACE)/layouts/$$(LAYOUT)/*/.)))))
-    endif
-
-    KEYMAPS := $$(sort $$(KEYMAPS) $$(LAYOUT_KEYMAPS))
+    KEYMAPS := $(shell $(QMK_BIN) list-keymaps --keyboard $1)
 
     # if the rule after removing the start of it is empty (we haven't specified a kemap or target)
     # compile all the keymaps

builddefs/build_json.mk

@@ -1,36 +0,0 @@
-# Look for a json keymap file
-ifneq ("$(wildcard $(MAIN_KEYMAP_PATH_5)/keymap.json)","")
-    KEYMAP_JSON := $(MAIN_KEYMAP_PATH_5)/keymap.json
-    KEYMAP_JSON_PATH := $(MAIN_KEYMAP_PATH_5)
-else ifneq ("$(wildcard $(MAIN_KEYMAP_PATH_4)/keymap.json)","")
-    KEYMAP_JSON := $(MAIN_KEYMAP_PATH_4)/keymap.json
-    KEYMAP_JSON_PATH := $(MAIN_KEYMAP_PATH_4)
-else ifneq ("$(wildcard $(MAIN_KEYMAP_PATH_3)/keymap.json)","")
-    KEYMAP_JSON := $(MAIN_KEYMAP_PATH_3)/keymap.json
-    KEYMAP_JSON_PATH := $(MAIN_KEYMAP_PATH_3)
-else ifneq ("$(wildcard $(MAIN_KEYMAP_PATH_2)/keymap.json)","")
-    KEYMAP_JSON := $(MAIN_KEYMAP_PATH_2)/keymap.json
-    KEYMAP_JSON_PATH := $(MAIN_KEYMAP_PATH_2)
-else ifneq ("$(wildcard $(MAIN_KEYMAP_PATH_1)/keymap.json)","")
-    KEYMAP_JSON := $(MAIN_KEYMAP_PATH_1)/keymap.json
-    KEYMAP_JSON_PATH := $(MAIN_KEYMAP_PATH_1)
-endif
-
-ifneq ($(QMK_USERSPACE),)
-    ifneq ("$(wildcard $(QMK_USERSPACE)/$(MAIN_KEYMAP_PATH_5)/keymap.json)","")
-        KEYMAP_JSON := $(QMK_USERSPACE)/$(MAIN_KEYMAP_PATH_5)/keymap.json
-        KEYMAP_PATH := $(QMK_USERSPACE)/$(MAIN_KEYMAP_PATH_5)
-    else ifneq ("$(wildcard $(QMK_USERSPACE)/$(MAIN_KEYMAP_PATH_4)/keymap.json)","")
-        KEYMAP_JSON := $(QMK_USERSPACE)/$(MAIN_KEYMAP_PATH_4)/keymap.json
-        KEYMAP_PATH := $(QMK_USERSPACE)/$(MAIN_KEYMAP_PATH_4)
-    else ifneq ("$(wildcard $(QMK_USERSPACE)/$(MAIN_KEYMAP_PATH_3)/keymap.json)","")
-        KEYMAP_JSON := $(QMK_USERSPACE)/$(MAIN_KEYMAP_PATH_3)/keymap.json
-        KEYMAP_PATH := $(QMK_USERSPACE)/$(MAIN_KEYMAP_PATH_3)
-    else ifneq ("$(wildcard $(QMK_USERSPACE)/$(MAIN_KEYMAP_PATH_2)/keymap.json)","")
-        KEYMAP_JSON := $(QMK_USERSPACE)/$(MAIN_KEYMAP_PATH_2)/keymap.json
-        KEYMAP_PATH := $(QMK_USERSPACE)/$(MAIN_KEYMAP_PATH_2)
-    else ifneq ("$(wildcard $(QMK_USERSPACE)/$(MAIN_KEYMAP_PATH_1)/keymap.json)","")
-        KEYMAP_JSON := $(QMK_USERSPACE)/$(MAIN_KEYMAP_PATH_1)/keymap.json
-        KEYMAP_PATH := $(QMK_USERSPACE)/$(MAIN_KEYMAP_PATH_1)
-    endif
-endif

builddefs/build_keyboard.mk

@@ -138,75 +138,12 @@ ifneq ("$(wildcard $(KEYBOARD_PATH_5)/keyboard.json)","")
     DD_CONFIG_FILES += $(KEYBOARD_PATH_5)/keyboard.json
 endif
 
-MAIN_KEYMAP_PATH_1 := $(KEYBOARD_PATH_1)/keymaps/$(KEYMAP)
-MAIN_KEYMAP_PATH_2 := $(KEYBOARD_PATH_2)/keymaps/$(KEYMAP)
-MAIN_KEYMAP_PATH_3 := $(KEYBOARD_PATH_3)/keymaps/$(KEYMAP)
-MAIN_KEYMAP_PATH_4 := $(KEYBOARD_PATH_4)/keymaps/$(KEYMAP)
-MAIN_KEYMAP_PATH_5 := $(KEYBOARD_PATH_5)/keymaps/$(KEYMAP)
-
 # Pull in rules from DD keyboard config
 INFO_RULES_MK = $(shell $(QMK_BIN) generate-rules-mk --quiet --escape --keyboard $(KEYBOARD) --output $(INTERMEDIATE_OUTPUT)/src/info_rules.mk)
 include $(INFO_RULES_MK)
 
-# Check for keymap.json first, so we can regenerate keymap.c
-include $(BUILDDEFS_PATH)/build_json.mk
-
-# Pull in keymap level rules.mk
-ifeq ("$(wildcard $(KEYMAP_PATH))", "")
-    # Look through the possible keymap folders until we find a matching keymap.c
-    ifneq ($(QMK_USERSPACE),)
-        ifneq ("$(wildcard $(QMK_USERSPACE)/$(MAIN_KEYMAP_PATH_1)/keymap.c)","")
-            -include $(QMK_USERSPACE)/$(MAIN_KEYMAP_PATH_1)/rules.mk
-            KEYMAP_C := $(QMK_USERSPACE)/$(MAIN_KEYMAP_PATH_1)/keymap.c
-            KEYMAP_PATH := $(QMK_USERSPACE)/$(MAIN_KEYMAP_PATH_1)
-        else ifneq ("$(wildcard $(QMK_USERSPACE)/$(MAIN_KEYMAP_PATH_2)/keymap.c)","")
-            -include $(QMK_USERSPACE)/$(MAIN_KEYMAP_PATH_2)/rules.mk
-            KEYMAP_C := $(QMK_USERSPACE)/$(MAIN_KEYMAP_PATH_2)/keymap.c
-            KEYMAP_PATH := $(QMK_USERSPACE)/$(MAIN_KEYMAP_PATH_2)
-        else ifneq ("$(wildcard $(QMK_USERSPACE)/$(MAIN_KEYMAP_PATH_3)/keymap.c)","")
-            -include $(QMK_USERSPACE)/$(MAIN_KEYMAP_PATH_3)/rules.mk
-            KEYMAP_C := $(QMK_USERSPACE)/$(MAIN_KEYMAP_PATH_3)/keymap.c
-            KEYMAP_PATH := $(QMK_USERSPACE)/$(MAIN_KEYMAP_PATH_3)
-        else ifneq ("$(wildcard $(QMK_USERSPACE)/$(MAIN_KEYMAP_PATH_4)/keymap.c)","")
-            -include $(QMK_USERSPACE)/$(MAIN_KEYMAP_PATH_4)/rules.mk
-            KEYMAP_C := $(QMK_USERSPACE)/$(MAIN_KEYMAP_PATH_4)/keymap.c
-            KEYMAP_PATH := $(QMK_USERSPACE)/$(MAIN_KEYMAP_PATH_4)
-        else ifneq ("$(wildcard $(QMK_USERSPACE)/$(MAIN_KEYMAP_PATH_5)/keymap.c)","")
-            -include $(QMK_USERSPACE)/$(MAIN_KEYMAP_PATH_5)/rules.mk
-            KEYMAP_C := $(QMK_USERSPACE)/$(MAIN_KEYMAP_PATH_5)/keymap.c
-            KEYMAP_PATH := $(QMK_USERSPACE)/$(MAIN_KEYMAP_PATH_5)
-        endif
-    endif
-    ifeq ($(KEYMAP_PATH),)
-        ifneq ("$(wildcard $(MAIN_KEYMAP_PATH_1)/keymap.c)","")
-            -include $(MAIN_KEYMAP_PATH_1)/rules.mk
-            KEYMAP_C := $(MAIN_KEYMAP_PATH_1)/keymap.c
-            KEYMAP_PATH := $(MAIN_KEYMAP_PATH_1)
-        else ifneq ("$(wildcard $(MAIN_KEYMAP_PATH_2)/keymap.c)","")
-            -include $(MAIN_KEYMAP_PATH_2)/rules.mk
-            KEYMAP_C := $(MAIN_KEYMAP_PATH_2)/keymap.c
-            KEYMAP_PATH := $(MAIN_KEYMAP_PATH_2)
-        else ifneq ("$(wildcard $(MAIN_KEYMAP_PATH_3)/keymap.c)","")
-            -include $(MAIN_KEYMAP_PATH_3)/rules.mk
-            KEYMAP_C := $(MAIN_KEYMAP_PATH_3)/keymap.c
-            KEYMAP_PATH := $(MAIN_KEYMAP_PATH_3)
-        else ifneq ("$(wildcard $(MAIN_KEYMAP_PATH_4)/keymap.c)","")
-            -include $(MAIN_KEYMAP_PATH_4)/rules.mk
-            KEYMAP_C := $(MAIN_KEYMAP_PATH_4)/keymap.c
-            KEYMAP_PATH := $(MAIN_KEYMAP_PATH_4)
-        else ifneq ("$(wildcard $(MAIN_KEYMAP_PATH_5)/keymap.c)","")
-            -include $(MAIN_KEYMAP_PATH_5)/rules.mk
-            KEYMAP_C := $(MAIN_KEYMAP_PATH_5)/keymap.c
-            KEYMAP_PATH := $(MAIN_KEYMAP_PATH_5)
-        else ifneq ($(LAYOUTS),)
-            # If we haven't found a keymap yet fall back to community layouts
-            include $(BUILDDEFS_PATH)/build_layout.mk
-        else ifeq ("$(wildcard $(KEYMAP_JSON_PATH))", "") # Not finding keymap.c is fine if we found a keymap.json
-            $(call CATASTROPHIC_ERROR,Invalid keymap,Could not find keymap)
-            # this state should never be reached
-        endif
-    endif
-endif
+include $(BUILDDEFS_PATH)/locate_keymap.mk
+-include $(KEYMAP_PATH)/rules.mk
 
 # Have we found a keymap.json?
 ifneq ("$(wildcard $(KEYMAP_JSON))", "")
@@ -217,16 +154,9 @@ ifneq ("$(wildcard $(KEYMAP_JSON))", "")
         OPT_DEFS += -DOTHER_KEYMAP_C=\"$(OTHER_KEYMAP_C)\"
     endif
 
-    KEYMAP_PATH := $(KEYMAP_JSON_PATH)
-
     KEYMAP_C := $(INTERMEDIATE_OUTPUT)/src/keymap.c
     KEYMAP_H := $(INTERMEDIATE_OUTPUT)/src/config.h
 
-    ifeq ($(OTHER_KEYMAP_C),)
-        # Load the keymap-level rules.mk if exists (and we havent already loaded it for keymap.c)
-        -include $(KEYMAP_PATH)/rules.mk
-    endif
-
     # Load any rules.mk content from keymap.json
     INFO_RULES_MK = $(shell $(QMK_BIN) generate-rules-mk --quiet --escape --output $(INTERMEDIATE_OUTPUT)/src/rules.mk $(KEYMAP_JSON))
     include $(INFO_RULES_MK)
@@ -255,6 +185,13 @@ endif
 COMMUNITY_RULES_MK = $(shell $(QMK_BIN) generate-community-modules-rules-mk -kb $(KEYBOARD) --quiet --escape --output $(INTERMEDIATE_OUTPUT)/src/community_rules.mk $(KEYMAP_JSON))
 include $(COMMUNITY_RULES_MK)
 
+ifneq ($(COMMUNITY_MODULES),)
+
+$(INTERMEDIATE_OUTPUT)/src/community_config.h: $(KEYMAP_JSON) $(DD_CONFIG_FILES)
+	@$(SILENT) || printf "$(MSG_GENERATING) $@" | $(AWK_CMD)
+	$(eval CMD=$(QMK_BIN) generate-community-config-h -kb $(KEYBOARD) --quiet --output $(INTERMEDIATE_OUTPUT)/src/community_config.h $(KEYMAP_JSON))
+	@$(BUILD_CMD)
+
 $(INTERMEDIATE_OUTPUT)/src/community_modules.h: $(KEYMAP_JSON) $(DD_CONFIG_FILES)
 	@$(SILENT) || printf "$(MSG_GENERATING) $@" | $(AWK_CMD)
 	$(eval CMD=$(QMK_BIN) generate-community-modules-h -kb $(KEYBOARD) --quiet --output $(INTERMEDIATE_OUTPUT)/src/community_modules.h $(KEYMAP_JSON))
@@ -285,9 +222,17 @@ $(INTERMEDIATE_OUTPUT)/src/rgb_matrix_community_modules.inc: $(KEYMAP_JSON) $(DD
 	$(eval CMD=$(QMK_BIN) generate-rgb-matrix-community-modules-inc -kb $(KEYBOARD) --quiet --output $(INTERMEDIATE_OUTPUT)/src/rgb_matrix_community_modules.inc $(KEYMAP_JSON))
 	@$(BUILD_CMD)
 
+$(INTERMEDIATE_OUTPUT)/src/split_transaction_id_community_modules.inc: $(KEYMAP_JSON) $(DD_CONFIG_FILES)
+	@$(SILENT) || printf "$(MSG_GENERATING) $@" | $(AWK_CMD)
+	$(eval CMD=$(QMK_BIN) generate-split-transaction-id-community-modules-inc -kb $(KEYBOARD) --quiet --output $(INTERMEDIATE_OUTPUT)/src/split_transaction_id_community_modules.inc $(KEYMAP_JSON))
+	@$(BUILD_CMD)
+
+COMMUNITY_CONFIG_H = $(INTERMEDIATE_OUTPUT)/src/community_config.h
 SRC += $(INTERMEDIATE_OUTPUT)/src/community_modules.c
 
-generated-files: $(INTERMEDIATE_OUTPUT)/src/community_modules.h $(INTERMEDIATE_OUTPUT)/src/community_modules.c $(INTERMEDIATE_OUTPUT)/src/community_modules_introspection.c $(INTERMEDIATE_OUTPUT)/src/community_modules_introspection.h $(INTERMEDIATE_OUTPUT)/src/led_matrix_community_modules.inc $(INTERMEDIATE_OUTPUT)/src/rgb_matrix_community_modules.inc
+generated-files: $(INTERMEDIATE_OUTPUT)/src/community_config.h $(INTERMEDIATE_OUTPUT)/src/community_modules.h $(INTERMEDIATE_OUTPUT)/src/community_modules.c $(INTERMEDIATE_OUTPUT)/src/community_modules_introspection.c $(INTERMEDIATE_OUTPUT)/src/community_modules_introspection.h $(INTERMEDIATE_OUTPUT)/src/led_matrix_community_modules.inc $(INTERMEDIATE_OUTPUT)/src/rgb_matrix_community_modules.inc $(INTERMEDIATE_OUTPUT)/src/split_transaction_id_community_modules.inc
+
+endif
 
 include $(BUILDDEFS_PATH)/converters.mk
 
@@ -386,6 +331,10 @@ define config_h_community_module_appender
 endef
 $(foreach module,$(COMMUNITY_MODULE_PATHS),$(eval $(call config_h_community_module_appender,$(module))))
 
+ifneq ($(COMMUNITY_CONFIG_H),)
+    CONFIG_H += $(COMMUNITY_CONFIG_H)
+endif
+
 ifneq ("$(wildcard $(KEYBOARD_PATH_5)/config.h)","")
     CONFIG_H += $(KEYBOARD_PATH_5)/config.h
 endif
@@ -470,8 +419,10 @@ ifneq ($(wildcard $(QMK_USERSPACE)),)
 endif
 
 # If the equivalent users directory exists in userspace, use that in preference to anything currently in the main repo
-ifneq ($(wildcard $(QMK_USERSPACE)/$(USER_PATH)),)
-    USER_PATH := $(QMK_USERSPACE)/$(USER_PATH)
+ifneq ($(QMK_USERSPACE),)
+	ifneq ($(wildcard $(QMK_USERSPACE)/$(USER_PATH)),)
+    	USER_PATH := $(QMK_USERSPACE)/$(USER_PATH)
+	endif
 endif
 
 # Pull in user level rules.mk

builddefs/build_layout.mk

@@ -1,36 +0,0 @@
-LAYOUTS_PATH := layouts
-LAYOUTS_REPOS := $(patsubst %/,%,$(sort $(dir $(wildcard $(LAYOUTS_PATH)/*/))))
-
-ifneq ($(QMK_USERSPACE),)
-    LAYOUTS_REPOS += $(patsubst %/,%,$(QMK_USERSPACE)/$(LAYOUTS_PATH))
-endif
-
-define SEARCH_LAYOUTS_REPO
-    LAYOUT_KEYMAP_PATH := $$(LAYOUTS_REPO)/$$(LAYOUT)/$$(KEYMAP)
-    LAYOUT_KEYMAP_JSON := $$(LAYOUT_KEYMAP_PATH)/keymap.json
-    LAYOUT_KEYMAP_C := $$(LAYOUT_KEYMAP_PATH)/keymap.c
-    ifneq ("$$(wildcard $$(LAYOUT_KEYMAP_JSON))","")
-        -include $$(LAYOUT_KEYMAP_PATH)/rules.mk
-        KEYMAP_JSON := $$(LAYOUT_KEYMAP_JSON)
-        KEYMAP_PATH := $$(LAYOUT_KEYMAP_PATH)
-    else ifneq ("$$(wildcard $$(LAYOUT_KEYMAP_C))","")
-        -include $$(LAYOUT_KEYMAP_PATH)/rules.mk
-        KEYMAP_C := $$(LAYOUT_KEYMAP_C)
-        KEYMAP_PATH := $$(LAYOUT_KEYMAP_PATH)
-    endif
-endef
-
-define SEARCH_LAYOUTS
-    $$(foreach LAYOUTS_REPO,$$(LAYOUTS_REPOS),$$(eval $$(call SEARCH_LAYOUTS_REPO)))
-endef
-
-ifneq ($(FORCE_LAYOUT),)
-    ifneq (,$(findstring $(FORCE_LAYOUT),$(LAYOUTS)))
-        $(info Forcing layout: $(FORCE_LAYOUT))
-        LAYOUTS := $(FORCE_LAYOUT)
-    else
-        $(call CATASTROPHIC_ERROR,Invalid layout,Forced layout does not exist)
-    endif
-endif
-
-$(foreach LAYOUT,$(LAYOUTS),$(eval $(call SEARCH_LAYOUTS)))

builddefs/common_features.mk

@@ -125,7 +125,7 @@ ifeq ($(strip $(MOUSEKEY_ENABLE)), yes)
     MOUSE_ENABLE := yes
 endif
 
-VALID_POINTING_DEVICE_DRIVER_TYPES := adns5050 adns9800 analog_joystick azoteq_iqs5xx cirque_pinnacle_i2c cirque_pinnacle_spi paw3204 pmw3320 pmw3360 pmw3389 pimoroni_trackball custom
+VALID_POINTING_DEVICE_DRIVER_TYPES := adns5050 adns9800 analog_joystick azoteq_iqs5xx cirque_pinnacle_i2c cirque_pinnacle_spi paw3204 paw3222 pmw3320 pmw3360 pmw3389 pimoroni_trackball custom
 ifeq ($(strip $(POINTING_DEVICE_ENABLE)), yes)
     ifeq ($(filter $(POINTING_DEVICE_DRIVER),$(VALID_POINTING_DEVICE_DRIVER_TYPES)),)
         $(call CATASTROPHIC_ERROR,Invalid POINTING_DEVICE_DRIVER,POINTING_DEVICE_DRIVER="$(POINTING_DEVICE_DRIVER)" is not a valid pointing device type)
@@ -157,6 +157,8 @@ ifeq ($(strip $(POINTING_DEVICE_ENABLE)), yes)
             SRC += drivers/sensors/cirque_pinnacle.c
             SRC += drivers/sensors/cirque_pinnacle_gestures.c
             SRC += $(QUANTUM_DIR)/pointing_device/pointing_device_gestures.c
+        else ifeq ($(strip $(POINTING_DEVICE_DRIVER)), paw3222)
+            SPI_DRIVER_REQUIRED = yes
         else ifeq ($(strip $(POINTING_DEVICE_DRIVER)), pimoroni_trackball)
             I2C_DRIVER_REQUIRED = yes
         else ifneq ($(filter $(strip $(POINTING_DEVICE_DRIVER)),pmw3360 pmw3389),)

builddefs/common_rules.mk

@@ -58,7 +58,7 @@ endif
 #---------------- C Compiler Options ----------------
 
 ifeq ($(strip $(LTO_ENABLE)), yes)
-    CDEFS += -flto
+    CDEFS += -flto=auto
     CDEFS += -DLTO_ENABLE
 endif
 
@@ -72,6 +72,8 @@ endif
 endif
 CFLAGS += -Wall
 CFLAGS += -Wstrict-prototypes
+CFLAGS += $(call cc-option,-Wunused-but-set-variable=1,-Wunused-but-set-variable)
+CFLAGS += $(call cc-option,-Wunused-but-set-parameter=1,-Wunused-but-set-parameter)
 ifneq ($(strip $(ALLOW_WARNINGS)), yes)
     CFLAGS += -Werror
 endif
@@ -89,7 +91,8 @@ CXXFLAGS += -O$(OPT)
 CXXFLAGS += -w
 CXXFLAGS += -Wall
 CXXFLAGS += -Wundef
-
+CXXFLAGS += $(call cc-option,-Wunused-but-set-variable=1,-Wunused-but-set-variable)
+CXXFLAGS += $(call cc-option,-Wunused-but-set-parameter=1,-Wunused-but-set-parameter)
 ifneq ($(strip $(ALLOW_WARNINGS)), yes)
     CXXFLAGS += -Werror
 endif

builddefs/docsgen/yarn.lock

@@ -298,100 +298,130 @@
   resolved "https://registry.yarnpkg.com/@jridgewell/sourcemap-codec/-/sourcemap-codec-1.4.15.tgz#d7c6e6755c78567a951e04ab52ef0fd26de59f32"
   integrity sha512-eF2rxCRulEKXHTRiDrDy6erMYWqNw4LPdQ8UQA4huuxaQsVeRPFl2oM8oDGxMFhJUWZf9McpLtJasDDZb/Bpeg==
 
-"@rollup/rollup-android-arm-eabi@4.31.0":
-  version "4.31.0"
-  resolved "https://registry.yarnpkg.com/@rollup/rollup-android-arm-eabi/-/rollup-android-arm-eabi-4.31.0.tgz#d4dd60da0075a6ce9a6c76d71b8204f3e1822285"
-  integrity sha512-9NrR4033uCbUBRgvLcBrJofa2KY9DzxL2UKZ1/4xA/mnTNyhZCWBuD8X3tPm1n4KxcgaraOYgrFKSgwjASfmlA==
+"@rollup/rollup-android-arm-eabi@4.59.0":
+  version "4.59.0"
+  resolved "https://registry.yarnpkg.com/@rollup/rollup-android-arm-eabi/-/rollup-android-arm-eabi-4.59.0.tgz#a6742c74c7d9d6d604ef8a48f99326b4ecda3d82"
+  integrity sha512-upnNBkA6ZH2VKGcBj9Fyl9IGNPULcjXRlg0LLeaioQWueH30p6IXtJEbKAgvyv+mJaMxSm1l6xwDXYjpEMiLMg==
 
-"@rollup/rollup-android-arm64@4.31.0":
-  version "4.31.0"
-  resolved "https://registry.yarnpkg.com/@rollup/rollup-android-arm64/-/rollup-android-arm64-4.31.0.tgz#25c4d33259a7a2ccd2f52a5ffcc0bb3ab3f0729d"
-  integrity sha512-iBbODqT86YBFHajxxF8ebj2hwKm1k8PTBQSojSt3d1FFt1gN+xf4CowE47iN0vOSdnd+5ierMHBbu/rHc7nq5g==
+"@rollup/rollup-android-arm64@4.59.0":
+  version "4.59.0"
+  resolved "https://registry.yarnpkg.com/@rollup/rollup-android-arm64/-/rollup-android-arm64-4.59.0.tgz#97247be098de4df0c11971089fd2edf80a5da8cf"
+  integrity sha512-hZ+Zxj3SySm4A/DylsDKZAeVg0mvi++0PYVceVyX7hemkw7OreKdCvW2oQ3T1FMZvCaQXqOTHb8qmBShoqk69Q==
 
-"@rollup/rollup-darwin-arm64@4.31.0":
-  version "4.31.0"
-  resolved "https://registry.yarnpkg.com/@rollup/rollup-darwin-arm64/-/rollup-darwin-arm64-4.31.0.tgz#d137dff254b19163a6b52ac083a71cd055dae844"
-  integrity sha512-WHIZfXgVBX30SWuTMhlHPXTyN20AXrLH4TEeH/D0Bolvx9PjgZnn4H677PlSGvU6MKNsjCQJYczkpvBbrBnG6g==
+"@rollup/rollup-darwin-arm64@4.59.0":
+  version "4.59.0"
+  resolved "https://registry.yarnpkg.com/@rollup/rollup-darwin-arm64/-/rollup-darwin-arm64-4.59.0.tgz#674852cf14cf11b8056e0b1a2f4e872b523576cf"
+  integrity sha512-W2Psnbh1J8ZJw0xKAd8zdNgF9HRLkdWwwdWqubSVk0pUuQkoHnv7rx4GiF9rT4t5DIZGAsConRE3AxCdJ4m8rg==
 
-"@rollup/rollup-darwin-x64@4.31.0":
-  version "4.31.0"
-  resolved "https://registry.yarnpkg.com/@rollup/rollup-darwin-x64/-/rollup-darwin-x64-4.31.0.tgz#58ff20b5dacb797d3adca19f02a21c532f9d55bf"
-  integrity sha512-hrWL7uQacTEF8gdrQAqcDy9xllQ0w0zuL1wk1HV8wKGSGbKPVjVUv/DEwT2+Asabf8Dh/As+IvfdU+H8hhzrQQ==
+"@rollup/rollup-darwin-x64@4.59.0":
+  version "4.59.0"
+  resolved "https://registry.yarnpkg.com/@rollup/rollup-darwin-x64/-/rollup-darwin-x64-4.59.0.tgz#36dfd7ed0aaf4d9d89d9ef983af72632455b0246"
+  integrity sha512-ZW2KkwlS4lwTv7ZVsYDiARfFCnSGhzYPdiOU4IM2fDbL+QGlyAbjgSFuqNRbSthybLbIJ915UtZBtmuLrQAT/w==
 
-"@rollup/rollup-freebsd-arm64@4.31.0":
-  version "4.31.0"
-  resolved "https://registry.yarnpkg.com/@rollup/rollup-freebsd-arm64/-/rollup-freebsd-arm64-4.31.0.tgz#96ce1a241c591ec3e068f4af765d94eddb24e60c"
-  integrity sha512-S2oCsZ4hJviG1QjPY1h6sVJLBI6ekBeAEssYKad1soRFv3SocsQCzX6cwnk6fID6UQQACTjeIMB+hyYrFacRew==
+"@rollup/rollup-freebsd-arm64@4.59.0":
+  version "4.59.0"
+  resolved "https://registry.yarnpkg.com/@rollup/rollup-freebsd-arm64/-/rollup-freebsd-arm64-4.59.0.tgz#2f87c2074b4220260fdb52a9996246edfc633c22"
+  integrity sha512-EsKaJ5ytAu9jI3lonzn3BgG8iRBjV4LxZexygcQbpiU0wU0ATxhNVEpXKfUa0pS05gTcSDMKpn3Sx+QB9RlTTA==
 
-"@rollup/rollup-freebsd-x64@4.31.0":
-  version "4.31.0"
-  resolved "https://registry.yarnpkg.com/@rollup/rollup-freebsd-x64/-/rollup-freebsd-x64-4.31.0.tgz#e59e7ede505be41f0b4311b0b943f8eb44938467"
-  integrity sha512-pCANqpynRS4Jirn4IKZH4tnm2+2CqCNLKD7gAdEjzdLGbH1iO0zouHz4mxqg0uEMpO030ejJ0aA6e1PJo2xrPA==
+"@rollup/rollup-freebsd-x64@4.59.0":
+  version "4.59.0"
+  resolved "https://registry.yarnpkg.com/@rollup/rollup-freebsd-x64/-/rollup-freebsd-x64-4.59.0.tgz#9b5a26522a38a95dc06616d1939d4d9a76937803"
+  integrity sha512-d3DuZi2KzTMjImrxoHIAODUZYoUUMsuUiY4SRRcJy6NJoZ6iIqWnJu9IScV9jXysyGMVuW+KNzZvBLOcpdl3Vg==
 
-"@rollup/rollup-linux-arm-gnueabihf@4.31.0":
-  version "4.31.0"
-  resolved "https://registry.yarnpkg.com/@rollup/rollup-linux-arm-gnueabihf/-/rollup-linux-arm-gnueabihf-4.31.0.tgz#e455ca6e4ff35bd46d62201c153352e717000a7b"
-  integrity sha512-0O8ViX+QcBd3ZmGlcFTnYXZKGbFu09EhgD27tgTdGnkcYXLat4KIsBBQeKLR2xZDCXdIBAlWLkiXE1+rJpCxFw==
+"@rollup/rollup-linux-arm-gnueabihf@4.59.0":
+  version "4.59.0"
+  resolved "https://registry.yarnpkg.com/@rollup/rollup-linux-arm-gnueabihf/-/rollup-linux-arm-gnueabihf-4.59.0.tgz#86aa4859385a8734235b5e40a48e52d770758c3a"
+  integrity sha512-t4ONHboXi/3E0rT6OZl1pKbl2Vgxf9vJfWgmUoCEVQVxhW6Cw/c8I6hbbu7DAvgp82RKiH7TpLwxnJeKv2pbsw==
 
-"@rollup/rollup-linux-arm-musleabihf@4.31.0":
-  version "4.31.0"
-  resolved "https://registry.yarnpkg.com/@rollup/rollup-linux-arm-musleabihf/-/rollup-linux-arm-musleabihf-4.31.0.tgz#bc1a93d807d19e70b1e343a5bfea43723bcd6327"
-  integrity sha512-w5IzG0wTVv7B0/SwDnMYmbr2uERQp999q8FMkKG1I+j8hpPX2BYFjWe69xbhbP6J9h2gId/7ogesl9hwblFwwg==
+"@rollup/rollup-linux-arm-musleabihf@4.59.0":
+  version "4.59.0"
+  resolved "https://registry.yarnpkg.com/@rollup/rollup-linux-arm-musleabihf/-/rollup-linux-arm-musleabihf-4.59.0.tgz#cbe70e56e6ece8dac83eb773b624fc9e5a460976"
+  integrity sha512-CikFT7aYPA2ufMD086cVORBYGHffBo4K8MQ4uPS/ZnY54GKj36i196u8U+aDVT2LX4eSMbyHtyOh7D7Zvk2VvA==
 
-"@rollup/rollup-linux-arm64-gnu@4.31.0":
-  version "4.31.0"
-  resolved "https://registry.yarnpkg.com/@rollup/rollup-linux-arm64-gnu/-/rollup-linux-arm64-gnu-4.31.0.tgz#f38bf843f1dc3d5de680caf31084008846e3efae"
-  integrity sha512-JyFFshbN5xwy6fulZ8B/8qOqENRmDdEkcIMF0Zz+RsfamEW+Zabl5jAb0IozP/8UKnJ7g2FtZZPEUIAlUSX8cA==
+"@rollup/rollup-linux-arm64-gnu@4.59.0":
+  version "4.59.0"
+  resolved "https://registry.yarnpkg.com/@rollup/rollup-linux-arm64-gnu/-/rollup-linux-arm64-gnu-4.59.0.tgz#d14992a2e653bc3263d284bc6579b7a2890e1c45"
+  integrity sha512-jYgUGk5aLd1nUb1CtQ8E+t5JhLc9x5WdBKew9ZgAXg7DBk0ZHErLHdXM24rfX+bKrFe+Xp5YuJo54I5HFjGDAA==
 
-"@rollup/rollup-linux-arm64-musl@4.31.0":
-  version "4.31.0"
-  resolved "https://registry.yarnpkg.com/@rollup/rollup-linux-arm64-musl/-/rollup-linux-arm64-musl-4.31.0.tgz#b3987a96c18b7287129cf735be2dbf83e94d9d05"
-  integrity sha512-kpQXQ0UPFeMPmPYksiBL9WS/BDiQEjRGMfklVIsA0Sng347H8W2iexch+IEwaR7OVSKtr2ZFxggt11zVIlZ25g==
+"@rollup/rollup-linux-arm64-musl@4.59.0":
+  version "4.59.0"
+  resolved "https://registry.yarnpkg.com/@rollup/rollup-linux-arm64-musl/-/rollup-linux-arm64-musl-4.59.0.tgz#2fdd1ddc434ea90aeaa0851d2044789b4d07f6da"
+  integrity sha512-peZRVEdnFWZ5Bh2KeumKG9ty7aCXzzEsHShOZEFiCQlDEepP1dpUl/SrUNXNg13UmZl+gzVDPsiCwnV1uI0RUA==
 
-"@rollup/rollup-linux-loongarch64-gnu@4.31.0":
-  version "4.31.0"
-  resolved "https://registry.yarnpkg.com/@rollup/rollup-linux-loongarch64-gnu/-/rollup-linux-loongarch64-gnu-4.31.0.tgz#0f0324044e71c4f02e9f49e7ec4e347b655b34ee"
-  integrity sha512-pMlxLjt60iQTzt9iBb3jZphFIl55a70wexvo8p+vVFK+7ifTRookdoXX3bOsRdmfD+OKnMozKO6XM4zR0sHRrQ==
+"@rollup/rollup-linux-loong64-gnu@4.59.0":
+  version "4.59.0"
+  resolved "https://registry.yarnpkg.com/@rollup/rollup-linux-loong64-gnu/-/rollup-linux-loong64-gnu-4.59.0.tgz#8a181e6f89f969f21666a743cd411416c80099e7"
+  integrity sha512-gbUSW/97f7+r4gHy3Jlup8zDG190AuodsWnNiXErp9mT90iCy9NKKU0Xwx5k8VlRAIV2uU9CsMnEFg/xXaOfXg==
 
-"@rollup/rollup-linux-powerpc64le-gnu@4.31.0":
-  version "4.31.0"
-  resolved "https://registry.yarnpkg.com/@rollup/rollup-linux-powerpc64le-gnu/-/rollup-linux-powerpc64le-gnu-4.31.0.tgz#809479f27f1fd5b4eecd2aa732132ad952d454ba"
-  integrity sha512-D7TXT7I/uKEuWiRkEFbed1UUYZwcJDU4vZQdPTcepK7ecPhzKOYk4Er2YR4uHKme4qDeIh6N3XrLfpuM7vzRWQ==
+"@rollup/rollup-linux-loong64-musl@4.59.0":
+  version "4.59.0"
+  resolved "https://registry.yarnpkg.com/@rollup/rollup-linux-loong64-musl/-/rollup-linux-loong64-musl-4.59.0.tgz#904125af2babc395f8061daa27b5af1f4e3f2f78"
+  integrity sha512-yTRONe79E+o0FWFijasoTjtzG9EBedFXJMl888NBEDCDV9I2wGbFFfJQQe63OijbFCUZqxpHz1GzpbtSFikJ4Q==
 
-"@rollup/rollup-linux-riscv64-gnu@4.31.0":
-  version "4.31.0"
-  resolved "https://registry.yarnpkg.com/@rollup/rollup-linux-riscv64-gnu/-/rollup-linux-riscv64-gnu-4.31.0.tgz#7bc75c4f22db04d3c972f83431739cfa41c6a36e"
-  integrity sha512-wal2Tc8O5lMBtoePLBYRKj2CImUCJ4UNGJlLwspx7QApYny7K1cUYlzQ/4IGQBLmm+y0RS7dwc3TDO/pmcneTw==
+"@rollup/rollup-linux-ppc64-gnu@4.59.0":
+  version "4.59.0"
+  resolved "https://registry.yarnpkg.com/@rollup/rollup-linux-ppc64-gnu/-/rollup-linux-ppc64-gnu-4.59.0.tgz#a57970ac6864c9a3447411a658224bdcf948be22"
+  integrity sha512-sw1o3tfyk12k3OEpRddF68a1unZ5VCN7zoTNtSn2KndUE+ea3m3ROOKRCZxEpmT9nsGnogpFP9x6mnLTCaoLkA==
 
-"@rollup/rollup-linux-s390x-gnu@4.31.0":
-  version "4.31.0"
-  resolved "https://registry.yarnpkg.com/@rollup/rollup-linux-s390x-gnu/-/rollup-linux-s390x-gnu-4.31.0.tgz#cfe8052345c55864d83ae343362cf1912480170e"
-  integrity sha512-O1o5EUI0+RRMkK9wiTVpk2tyzXdXefHtRTIjBbmFREmNMy7pFeYXCFGbhKFwISA3UOExlo5GGUuuj3oMKdK6JQ==
+"@rollup/rollup-linux-ppc64-musl@4.59.0":
+  version "4.59.0"
+  resolved "https://registry.yarnpkg.com/@rollup/rollup-linux-ppc64-musl/-/rollup-linux-ppc64-musl-4.59.0.tgz#bb84de5b26870567a4267666e08891e80bb56a63"
+  integrity sha512-+2kLtQ4xT3AiIxkzFVFXfsmlZiG5FXYW7ZyIIvGA7Bdeuh9Z0aN4hVyXS/G1E9bTP/vqszNIN/pUKCk/BTHsKA==
 
-"@rollup/rollup-linux-x64-gnu@4.31.0":
-  version "4.31.0"
-  resolved "https://registry.yarnpkg.com/@rollup/rollup-linux-x64-gnu/-/rollup-linux-x64-gnu-4.31.0.tgz#c6b048f1e25f3fea5b4bd246232f4d07a159c5a0"
-  integrity sha512-zSoHl356vKnNxwOWnLd60ixHNPRBglxpv2g7q0Cd3Pmr561gf0HiAcUBRL3S1vPqRC17Zo2CX/9cPkqTIiai1g==
+"@rollup/rollup-linux-riscv64-gnu@4.59.0":
+  version "4.59.0"
+  resolved "https://registry.yarnpkg.com/@rollup/rollup-linux-riscv64-gnu/-/rollup-linux-riscv64-gnu-4.59.0.tgz#72d00d2c7fb375ce3564e759db33f17a35bffab9"
+  integrity sha512-NDYMpsXYJJaj+I7UdwIuHHNxXZ/b/N2hR15NyH3m2qAtb/hHPA4g4SuuvrdxetTdndfj9b1WOmy73kcPRoERUg==
 
-"@rollup/rollup-linux-x64-musl@4.31.0":
-  version "4.31.0"
-  resolved "https://registry.yarnpkg.com/@rollup/rollup-linux-x64-musl/-/rollup-linux-x64-musl-4.31.0.tgz#615273ac52d1a201f4de191cbd3389016a9d7d80"
-  integrity sha512-ypB/HMtcSGhKUQNiFwqgdclWNRrAYDH8iMYH4etw/ZlGwiTVxBz2tDrGRrPlfZu6QjXwtd+C3Zib5pFqID97ZA==
+"@rollup/rollup-linux-riscv64-musl@4.59.0":
+  version "4.59.0"
+  resolved "https://registry.yarnpkg.com/@rollup/rollup-linux-riscv64-musl/-/rollup-linux-riscv64-musl-4.59.0.tgz#4c166ef58e718f9245bd31873384ba15a5c1a883"
+  integrity sha512-nLckB8WOqHIf1bhymk+oHxvM9D3tyPndZH8i8+35p/1YiVoVswPid2yLzgX7ZJP0KQvnkhM4H6QZ5m0LzbyIAg==
 
-"@rollup/rollup-win32-arm64-msvc@4.31.0":
-  version "4.31.0"
-  resolved "https://registry.yarnpkg.com/@rollup/rollup-win32-arm64-msvc/-/rollup-win32-arm64-msvc-4.31.0.tgz#32ed85810c1b831c648eca999d68f01255b30691"
-  integrity sha512-JuhN2xdI/m8Hr+aVO3vspO7OQfUFO6bKLIRTAy0U15vmWjnZDLrEgCZ2s6+scAYaQVpYSh9tZtRijApw9IXyMw==
+"@rollup/rollup-linux-s390x-gnu@4.59.0":
+  version "4.59.0"
+  resolved "https://registry.yarnpkg.com/@rollup/rollup-linux-s390x-gnu/-/rollup-linux-s390x-gnu-4.59.0.tgz#bb5025cde9a61db478c2ca7215808ad3bce73a09"
+  integrity sha512-oF87Ie3uAIvORFBpwnCvUzdeYUqi2wY6jRFWJAy1qus/udHFYIkplYRW+wo+GRUP4sKzYdmE1Y3+rY5Gc4ZO+w==
 
-"@rollup/rollup-win32-ia32-msvc@4.31.0":
-  version "4.31.0"
-  resolved "https://registry.yarnpkg.com/@rollup/rollup-win32-ia32-msvc/-/rollup-win32-ia32-msvc-4.31.0.tgz#d47effada68bcbfdccd30c4a788d42e4542ff4d3"
-  integrity sha512-U1xZZXYkvdf5MIWmftU8wrM5PPXzyaY1nGCI4KI4BFfoZxHamsIe+BtnPLIvvPykvQWlVbqUXdLa4aJUuilwLQ==
+"@rollup/rollup-linux-x64-gnu@4.59.0":
+  version "4.59.0"
+  resolved "https://registry.yarnpkg.com/@rollup/rollup-linux-x64-gnu/-/rollup-linux-x64-gnu-4.59.0.tgz#9b66b1f9cd95c6624c788f021c756269ffed1552"
+  integrity sha512-3AHmtQq/ppNuUspKAlvA8HtLybkDflkMuLK4DPo77DfthRb71V84/c4MlWJXixZz4uruIH4uaa07IqoAkG64fg==
 
-"@rollup/rollup-win32-x64-msvc@4.31.0":
-  version "4.31.0"
-  resolved "https://registry.yarnpkg.com/@rollup/rollup-win32-x64-msvc/-/rollup-win32-x64-msvc-4.31.0.tgz#7a2d89a82cf0388d60304964217dd7beac6de645"
-  integrity sha512-ul8rnCsUumNln5YWwz0ted2ZHFhzhRRnkpBZ+YRuHoRAlUji9KChpOUOndY7uykrPEPXVbHLlsdo6v5yXo/TXw==
+"@rollup/rollup-linux-x64-musl@4.59.0":
+  version "4.59.0"
+  resolved "https://registry.yarnpkg.com/@rollup/rollup-linux-x64-musl/-/rollup-linux-x64-musl-4.59.0.tgz#b007ca255dc7166017d57d7d2451963f0bd23fd9"
+  integrity sha512-2UdiwS/9cTAx7qIUZB/fWtToJwvt0Vbo0zmnYt7ED35KPg13Q0ym1g442THLC7VyI6JfYTP4PiSOWyoMdV2/xg==
+
+"@rollup/rollup-openbsd-x64@4.59.0":
+  version "4.59.0"
+  resolved "https://registry.yarnpkg.com/@rollup/rollup-openbsd-x64/-/rollup-openbsd-x64-4.59.0.tgz#e8b357b2d1aa2c8d76a98f5f0d889eabe93f4ef9"
+  integrity sha512-M3bLRAVk6GOwFlPTIxVBSYKUaqfLrn8l0psKinkCFxl4lQvOSz8ZrKDz2gxcBwHFpci0B6rttydI4IpS4IS/jQ==
+
+"@rollup/rollup-openharmony-arm64@4.59.0":
+  version "4.59.0"
+  resolved "https://registry.yarnpkg.com/@rollup/rollup-openharmony-arm64/-/rollup-openharmony-arm64-4.59.0.tgz#96c2e3f4aacd3d921981329831ff8dde492204dc"
+  integrity sha512-tt9KBJqaqp5i5HUZzoafHZX8b5Q2Fe7UjYERADll83O4fGqJ49O1FsL6LpdzVFQcpwvnyd0i+K/VSwu/o/nWlA==
+
+"@rollup/rollup-win32-arm64-msvc@4.59.0":
+  version "4.59.0"
+  resolved "https://registry.yarnpkg.com/@rollup/rollup-win32-arm64-msvc/-/rollup-win32-arm64-msvc-4.59.0.tgz#2d865149d706d938df8b4b8f117e69a77646d581"
+  integrity sha512-V5B6mG7OrGTwnxaNUzZTDTjDS7F75PO1ae6MJYdiMu60sq0CqN5CVeVsbhPxalupvTX8gXVSU9gq+Rx1/hvu6A==
+
+"@rollup/rollup-win32-ia32-msvc@4.59.0":
+  version "4.59.0"
+  resolved "https://registry.yarnpkg.com/@rollup/rollup-win32-ia32-msvc/-/rollup-win32-ia32-msvc-4.59.0.tgz#abe1593be0fa92325e9971c8da429c5e05b92c36"
+  integrity sha512-UKFMHPuM9R0iBegwzKF4y0C4J9u8C6MEJgFuXTBerMk7EJ92GFVFYBfOZaSGLu6COf7FxpQNqhNS4c4icUPqxA==
+
+"@rollup/rollup-win32-x64-gnu@4.59.0":
+  version "4.59.0"
+  resolved "https://registry.yarnpkg.com/@rollup/rollup-win32-x64-gnu/-/rollup-win32-x64-gnu-4.59.0.tgz#c4af3e9518c9a5cd4b1c163dc81d0ad4d82e7eab"
+  integrity sha512-laBkYlSS1n2L8fSo1thDNGrCTQMmxjYY5G0WFWjFFYZkKPjsMBsgJfGf4TLxXrF6RyhI60L8TMOjBMvXiTcxeA==
+
+"@rollup/rollup-win32-x64-msvc@4.59.0":
+  version "4.59.0"
+  resolved "https://registry.yarnpkg.com/@rollup/rollup-win32-x64-msvc/-/rollup-win32-x64-msvc-4.59.0.tgz#4584a8a87b29188a4c1fe987a9fcf701e256d86c"
+  integrity sha512-2HRCml6OztYXyJXAvdDXPKcawukWY2GpR5/nxKp4iBgiO3wcoEGkAaqctIbZcNB6KlUQBIqt8VYkNSj2397EfA==
 
 "@shikijs/core@1.3.0", "@shikijs/core@^1.3.0":
   version "1.3.0"
@@ -405,10 +435,10 @@
   dependencies:
     shiki "1.3.0"
 
-"@types/estree@1.0.6":
-  version "1.0.6"
-  resolved "https://registry.yarnpkg.com/@types/estree/-/estree-1.0.6.tgz#628effeeae2064a1b4e79f78e81d87b7e5fc7b50"
-  integrity sha512-AYnb1nQyY49te+VRAVgmzfcgjYS91mY5P0TKUDCLEM+gNnA+3T6rWITXRLYCpahpqSQbN5cE+gHpnPyXjHWxcw==
+"@types/estree@1.0.8":
+  version "1.0.8"
+  resolved "https://registry.yarnpkg.com/@types/estree/-/estree-1.0.8.tgz#958b91c991b1867ced318bedea0e215ee050726e"
+  integrity sha512-dWHzHa2WqEXI/O1E9OjrocMTKJl2mSrEolh1Iomrv6U+JuNwaHXsXx9bLu5gG7BUWFIN0skIQJQ/L1rIex4X6w==
 
 "@types/linkify-it@*":
   version "3.0.5"
@@ -712,31 +742,37 @@ rfdc@^1.3.1:
   integrity sha512-r5a3l5HzYlIC68TpmYKlxWjmOP6wiPJ1vWv2HeLhNsRZMrCkxeqxiHlQ21oXmQ4F3SiryXBHhAD7JZqvOJjFmg==
 
 rollup@^4.20.0:
-  version "4.31.0"
-  resolved "https://registry.yarnpkg.com/rollup/-/rollup-4.31.0.tgz#b84af969a0292cb047dce2c0ec5413a9457597a4"
-  integrity sha512-9cCE8P4rZLx9+PjoyqHLs31V9a9Vpvfo4qNcs6JCiGWYhw2gijSetFbH6SSy1whnkgcefnUwr8sad7tgqsGvnw==
+  version "4.59.0"
+  resolved "https://registry.yarnpkg.com/rollup/-/rollup-4.59.0.tgz#cf74edac17c1486f562d728a4d923a694abdf06f"
+  integrity sha512-2oMpl67a3zCH9H79LeMcbDhXW/UmWG/y2zuqnF2jQq5uq9TbM9TVyXvA4+t+ne2IIkBdrLpAaRQAvo7YI/Yyeg==
   dependencies:
-    "@types/estree" "1.0.6"
+    "@types/estree" "1.0.8"
   optionalDependencies:
-    "@rollup/rollup-android-arm-eabi" "4.31.0"
-    "@rollup/rollup-android-arm64" "4.31.0"
-    "@rollup/rollup-darwin-arm64" "4.31.0"
-    "@rollup/rollup-darwin-x64" "4.31.0"
-    "@rollup/rollup-freebsd-arm64" "4.31.0"
-    "@rollup/rollup-freebsd-x64" "4.31.0"
-    "@rollup/rollup-linux-arm-gnueabihf" "4.31.0"
-    "@rollup/rollup-linux-arm-musleabihf" "4.31.0"
-    "@rollup/rollup-linux-arm64-gnu" "4.31.0"
-    "@rollup/rollup-linux-arm64-musl" "4.31.0"
-    "@rollup/rollup-linux-loongarch64-gnu" "4.31.0"
-    "@rollup/rollup-linux-powerpc64le-gnu" "4.31.0"
-    "@rollup/rollup-linux-riscv64-gnu" "4.31.0"
-    "@rollup/rollup-linux-s390x-gnu" "4.31.0"
-    "@rollup/rollup-linux-x64-gnu" "4.31.0"
-    "@rollup/rollup-linux-x64-musl" "4.31.0"
-    "@rollup/rollup-win32-arm64-msvc" "4.31.0"
-    "@rollup/rollup-win32-ia32-msvc" "4.31.0"
-    "@rollup/rollup-win32-x64-msvc" "4.31.0"
+    "@rollup/rollup-android-arm-eabi" "4.59.0"
+    "@rollup/rollup-android-arm64" "4.59.0"
+    "@rollup/rollup-darwin-arm64" "4.59.0"
+    "@rollup/rollup-darwin-x64" "4.59.0"
+    "@rollup/rollup-freebsd-arm64" "4.59.0"
+    "@rollup/rollup-freebsd-x64" "4.59.0"
+    "@rollup/rollup-linux-arm-gnueabihf" "4.59.0"
+    "@rollup/rollup-linux-arm-musleabihf" "4.59.0"
+    "@rollup/rollup-linux-arm64-gnu" "4.59.0"
+    "@rollup/rollup-linux-arm64-musl" "4.59.0"
+    "@rollup/rollup-linux-loong64-gnu" "4.59.0"
+    "@rollup/rollup-linux-loong64-musl" "4.59.0"
+    "@rollup/rollup-linux-ppc64-gnu" "4.59.0"
+    "@rollup/rollup-linux-ppc64-musl" "4.59.0"
+    "@rollup/rollup-linux-riscv64-gnu" "4.59.0"
+    "@rollup/rollup-linux-riscv64-musl" "4.59.0"
+    "@rollup/rollup-linux-s390x-gnu" "4.59.0"
+    "@rollup/rollup-linux-x64-gnu" "4.59.0"
+    "@rollup/rollup-linux-x64-musl" "4.59.0"
+    "@rollup/rollup-openbsd-x64" "4.59.0"
+    "@rollup/rollup-openharmony-arm64" "4.59.0"
+    "@rollup/rollup-win32-arm64-msvc" "4.59.0"
+    "@rollup/rollup-win32-ia32-msvc" "4.59.0"
+    "@rollup/rollup-win32-x64-gnu" "4.59.0"
+    "@rollup/rollup-win32-x64-msvc" "4.59.0"
     fsevents "~2.3.2"
 
 shiki@1.3.0, shiki@^1.3.0:

builddefs/locate_keymap.mk

@@ -0,0 +1,64 @@
+MAIN_KEYMAP_PATH_1 := $(KEYBOARD_PATH_1)/keymaps/$(KEYMAP)
+MAIN_KEYMAP_PATH_2 := $(KEYBOARD_PATH_2)/keymaps/$(KEYMAP)
+MAIN_KEYMAP_PATH_3 := $(KEYBOARD_PATH_3)/keymaps/$(KEYMAP)
+MAIN_KEYMAP_PATH_4 := $(KEYBOARD_PATH_4)/keymaps/$(KEYMAP)
+MAIN_KEYMAP_PATH_5 := $(KEYBOARD_PATH_5)/keymaps/$(KEYMAP)
+
+POTENTIAL_KEYMAP_PATHS += $(MAIN_KEYMAP_PATH_1)
+POTENTIAL_KEYMAP_PATHS += $(MAIN_KEYMAP_PATH_2)
+POTENTIAL_KEYMAP_PATHS += $(MAIN_KEYMAP_PATH_3)
+POTENTIAL_KEYMAP_PATHS += $(MAIN_KEYMAP_PATH_4)
+POTENTIAL_KEYMAP_PATHS += $(MAIN_KEYMAP_PATH_5)
+
+ifneq ($(QMK_USERSPACE),)
+    POTENTIAL_KEYMAP_PATHS += $(QMK_USERSPACE)/$(MAIN_KEYMAP_PATH_1)
+    POTENTIAL_KEYMAP_PATHS += $(QMK_USERSPACE)/$(MAIN_KEYMAP_PATH_2)
+    POTENTIAL_KEYMAP_PATHS += $(QMK_USERSPACE)/$(MAIN_KEYMAP_PATH_3)
+    POTENTIAL_KEYMAP_PATHS += $(QMK_USERSPACE)/$(MAIN_KEYMAP_PATH_4)
+    POTENTIAL_KEYMAP_PATHS += $(QMK_USERSPACE)/$(MAIN_KEYMAP_PATH_5)
+endif
+
+define SEARCH_POTENTIAL_LOCATION
+    POTENTIAL_DIR := $1
+    ifeq ("$$(wildcard $$(KEYMAP_PATH))", "")
+        POTENTIAL_KEYMAP_JSON := $$(POTENTIAL_DIR)/keymap.json
+        POTENTIAL_KEYMAP_C := $$(POTENTIAL_DIR)/keymap.c
+        ifneq ("$$(wildcard $$(POTENTIAL_KEYMAP_JSON))","")
+            KEYMAP_JSON := $$(POTENTIAL_KEYMAP_JSON)
+            KEYMAP_PATH := $$(POTENTIAL_DIR)
+        endif
+        ifneq ("$$(wildcard $$(POTENTIAL_KEYMAP_C))","")
+            KEYMAP_C := $$(POTENTIAL_KEYMAP_C)
+            KEYMAP_PATH := $$(POTENTIAL_DIR)
+        endif
+    endif
+endef
+
+$(foreach KM_DIR,$(POTENTIAL_KEYMAP_PATHS),$(eval $(call SEARCH_POTENTIAL_LOCATION, $(KM_DIR))))
+
+LAYOUTS_PATH := layouts
+LAYOUTS_REPOS := $(patsubst %/,%,$(sort $(dir $(wildcard $(LAYOUTS_PATH)/*/))))
+
+ifneq ($(QMK_USERSPACE),)
+    LAYOUTS_REPOS += $(patsubst %/,%,$(QMK_USERSPACE)/$(LAYOUTS_PATH))
+endif
+
+define SEARCH_LAYOUTS
+    $$(foreach LAYOUTS_REPO,$$(LAYOUTS_REPOS),$$(eval $$(call SEARCH_POTENTIAL_LOCATION,$$(LAYOUTS_REPO)/$$(LAYOUT)/$$(KEYMAP))))
+endef
+
+ifneq ($(FORCE_LAYOUT),)
+    ifneq (,$(findstring $(FORCE_LAYOUT),$(LAYOUTS)))
+        $(info Forcing layout: $(FORCE_LAYOUT))
+        LAYOUTS := $(FORCE_LAYOUT)
+    else
+        $(call CATASTROPHIC_ERROR,Invalid layout,Forced layout does not exist)
+    endif
+endif
+
+$(foreach LAYOUT,$(LAYOUTS),$(eval $(call SEARCH_LAYOUTS)))
+
+ifeq ("$$(wildcard $$(KEYMAP_PATH))", "")
+    $(call CATASTROPHIC_ERROR,Invalid keymap,Could not find keymap)
+    # this state should never be reached
+endif

builddefs/support.mk

@@ -4,7 +4,7 @@
 #   $(2) = option to use if $(1) is not supported
 #   $(3) = additional arguments to pass to the compiler during the test, but aren't contained in the output
 cc-option = $(shell \
-	if { echo 'int main(){return 0;}' | $(CC) $(1) $(3) -o /dev/null -x c /dev/null >/dev/null 2>&1; }; \
+	if { echo 'int main(){return 0;}' | $(CC) $(1) $(3) -Wl,--unresolved-symbols=ignore-all -o /dev/null -x c /dev/null >/dev/null 2>&1; }; \
 	then echo "$(1)"; else echo "$(2)"; fi)
 
 # Helper to pass comma character to make functions (use with `$(,)` to pass in `$(call ...)` arguments)

data/constants/keycodes/keycodes_0.0.1_audio.hjson

@@ -3,6 +3,7 @@
         "0x7480": {
             "group": "audio",
             "key": "QK_AUDIO_ON",
+            "label": "Audio On",
             "aliases": [
                 "AU_ON"
             ]
@@ -10,6 +11,7 @@
         "0x7481": {
             "group": "audio",
             "key": "QK_AUDIO_OFF",
+            "label": "Audio Off",
             "aliases": [
                 "AU_OFF"
             ]
@@ -17,6 +19,7 @@
         "0x7482": {
             "group": "audio",
             "key": "QK_AUDIO_TOGGLE",
+            "label": "Toggle Audio",
             "aliases": [
                 "AU_TOGG"
             ]
@@ -25,6 +28,7 @@
         "0x748A": {
             "group": "audio",
             "key": "QK_AUDIO_CLICKY_TOGGLE",
+            "label": "Toggle Audio Clicky",
             "aliases": [
                 "CK_TOGG"
             ]
@@ -32,6 +36,7 @@
         "0x748B": {
             "group": "audio",
             "key": "QK_AUDIO_CLICKY_ON",
+            "label": "Audio Clicky On",
             "aliases": [
                 "CK_ON"
             ]
@@ -39,6 +44,7 @@
         "0x748C": {
             "group": "audio",
             "key": "QK_AUDIO_CLICKY_OFF",
+            "label": "Audio Clicky Off",
             "aliases": [
                 "CK_OFF"
             ]
@@ -46,6 +52,7 @@
         "0x748D": {
             "group": "audio",
             "key": "QK_AUDIO_CLICKY_UP",
+            "label": "Audio Clicky Up",
             "aliases": [
                 "CK_UP"
             ]
@@ -53,6 +60,7 @@
         "0x748E": {
             "group": "audio",
             "key": "QK_AUDIO_CLICKY_DOWN",
+            "label": "Audio Clicky Down",
             "aliases": [
                 "CK_DOWN"
             ]
@@ -60,6 +68,7 @@
         "0x748F": {
             "group": "audio",
             "key": "QK_AUDIO_CLICKY_RESET",
+            "label": "Audio Clicky Reset",
             "aliases": [
                 "CK_RST"
             ]
@@ -68,6 +77,7 @@
         "0x7490": {
             "group": "audio",
             "key": "QK_MUSIC_ON",
+            "label": "Music On",
             "aliases": [
                 "MU_ON"
             ]
@@ -75,6 +85,7 @@
         "0x7491": {
             "group": "audio",
             "key": "QK_MUSIC_OFF",
+            "label": "Music Off",
             "aliases": [
                 "MU_OFF"
             ]
@@ -82,6 +93,7 @@
         "0x7492": {
             "group": "audio",
             "key": "QK_MUSIC_TOGGLE",
+            "label": "Toggle Music",
             "aliases": [
                 "MU_TOGG"
             ]
@@ -89,6 +101,7 @@
         "0x7493": {
             "group": "audio",
             "key": "QK_MUSIC_MODE_NEXT",
+            "label": "Music Next",
             "aliases": [
                 "MU_NEXT"
             ]
@@ -97,6 +110,7 @@
         "0x7494": {
             "group": "audio",
             "key": "QK_AUDIO_VOICE_NEXT",
+            "label": "Audio Voice Next",
             "aliases": [
                 "AU_NEXT"
             ]
@@ -104,6 +118,7 @@
         "0x7495": {
             "group": "audio",
             "key": "QK_AUDIO_VOICE_PREVIOUS",
+            "label": "Audio Voice Previous",
             "aliases": [
                 "AU_PREV"
             ]

data/constants/keycodes/keycodes_0.0.1_basic.hjson

@@ -3,7 +3,7 @@
         "0x0000": {
             "group": "internal",
             "key": "KC_NO",
-            "label": "",
+            "label": "N/A",
             "aliases": [
                 "XXXXXXX"
             ]
@@ -11,7 +11,7 @@
         "0x0001": {
             "group": "internal",
             "key": "KC_TRANSPARENT",
-            "label": "",
+            "label": "Transparent",
             "aliases": [
                 "_______",
                 "KC_TRNS"
@@ -634,7 +634,7 @@
         "0x0065": {
             "group": "basic",
             "key": "KC_APPLICATION",
-            "label": "Application",
+            "label": "App",
             "aliases": [
                 "KC_APP"
             ]
@@ -642,7 +642,7 @@
         "0x0066": {
             "group": "basic",
             "key": "KC_KB_POWER",
-            "label": "Application"
+            "label": "Power"
         },
         "0x0067": {
             "group": "basic",
@@ -1068,7 +1068,7 @@
         "0x00A5": {
             "group": "system",
             "key": "KC_SYSTEM_POWER",
-            "label": "System Power Down",
+            "label": "Power",
             "aliases": [
                 "KC_PWR"
             ]
@@ -1076,7 +1076,7 @@
         "0x00A6": {
             "group": "system",
             "key": "KC_SYSTEM_SLEEP",
-            "label": "System Sleep",
+            "label": "Sleep",
             "aliases": [
                 "KC_SLEP"
             ]
@@ -1084,7 +1084,7 @@
         "0x00A7": {
             "group": "system",
             "key": "KC_SYSTEM_WAKE",
-            "label": "System Wake",
+            "label": "Wake",
             "aliases": [
                 "KC_WAKE"
             ]
@@ -1140,7 +1140,7 @@
         "0x00AE": {
             "group": "media",
             "key": "KC_MEDIA_PLAY_PAUSE",
-            "label": "Play/Pause Track",
+            "label": "Play/Pause",
             "aliases": [
                 "KC_MPLY"
             ]
@@ -1148,7 +1148,7 @@
         "0x00AF": {
             "group": "media",
             "key": "KC_MEDIA_SELECT",
-            "label": "Launch Player",
+            "label": "Media",
             "aliases": [
                 "KC_MSEL"
             ]
@@ -1164,12 +1164,12 @@
         "0x00B1": {
             "group": "media",
             "key": "KC_MAIL",
-            "label": "Launch Mail"
+            "label": "Mail",
         },
         "0x00B2": {
             "group": "media",
             "key": "KC_CALCULATOR",
-            "label": "Launch Calculator",
+            "label": "Calculator",
             "aliases": [
                 "KC_CALC"
             ]
@@ -1177,7 +1177,7 @@
         "0x00B3": {
             "group": "media",
             "key": "KC_MY_COMPUTER",
-            "label": "Launch My Computer",
+            "label": "My Computer",
             "aliases": [
                 "KC_MYCM"
             ]
@@ -1185,7 +1185,7 @@
         "0x00B4": {
             "group": "media",
             "key": "KC_WWW_SEARCH",
-            "label": "Browser Search",
+            "label": "Search",
             "aliases": [
                 "KC_WSCH"
             ]
@@ -1193,7 +1193,7 @@
         "0x00B5": {
             "group": "media",
             "key": "KC_WWW_HOME",
-            "label": "Browser Home",
+            "label": "Home",
             "aliases": [
                 "KC_WHOM"
             ]
@@ -1201,7 +1201,7 @@
         "0x00B6": {
             "group": "media",
             "key": "KC_WWW_BACK",
-            "label": "Browser Back",
+            "label": "Back",
             "aliases": [
                 "KC_WBAK"
             ]
@@ -1209,7 +1209,7 @@
         "0x00B7": {
             "group": "media",
             "key": "KC_WWW_FORWARD",
-            "label": "Browser Forward",
+            "label": "Forward",
             "aliases": [
                 "KC_WFWD"
             ]
@@ -1217,7 +1217,7 @@
         "0x00B8": {
             "group": "media",
             "key": "KC_WWW_STOP",
-            "label": "Browser Stop",
+            "label": "Stop",
             "aliases": [
                 "KC_WSTP"
             ]
@@ -1225,7 +1225,7 @@
         "0x00B9": {
             "group": "media",
             "key": "KC_WWW_REFRESH",
-            "label": "Browser Refresh",
+            "label": "Refresh",
             "aliases": [
                 "KC_WREF"
             ]
@@ -1233,7 +1233,7 @@
         "0x00BA": {
             "group": "media",
             "key": "KC_WWW_FAVORITES",
-            "label": "Browser Favorites",
+            "label": "Favorites",
             "aliases": [
                 "KC_WFAV"
             ]
@@ -1241,7 +1241,7 @@
         "0x00BB": {
             "group": "media",
             "key": "KC_MEDIA_FAST_FORWARD",
-            "label": "Next Track",
+            "label": "Fast Forward",
             "aliases": [
                 "KC_MFFD"
             ]
@@ -1249,7 +1249,7 @@
         "0x00BC": {
             "group": "media",
             "key": "KC_MEDIA_REWIND",
-            "label": "Previous Track",
+            "label": "Rewind",
             "aliases": [
                 "KC_MRWD"
             ]
@@ -1273,7 +1273,7 @@
         "0x00BF": {
             "group": "media",
             "key": "KC_CONTROL_PANEL",
-            "label": "Open Control Panel",
+            "label": "Control Panel",
             "aliases": [
                 "KC_CPNL"
             ]
@@ -1281,7 +1281,7 @@
         "0x00C0": {
             "group": "media",
             "key": "KC_ASSISTANT",
-            "label": "Launch Assistant",
+            "label": "Assistant",
             "aliases": [
                 "KC_ASST"
             ]

data/constants/keycodes/keycodes_0.0.1_joystick.hjson

@@ -3,6 +3,7 @@
         "0x7400": {
             "group": "joystick",
             "key": "QK_JOYSTICK_BUTTON_0",
+            "label": "Button 0",
             "aliases": [
                 "JS_0"
             ]
@@ -10,6 +11,7 @@
         "0x7401": {
             "group": "joystick",
             "key": "QK_JOYSTICK_BUTTON_1",
+            "label": "Button 1",
             "aliases": [
                 "JS_1"
             ]
@@ -17,6 +19,7 @@
         "0x7402": {
             "group": "joystick",
             "key": "QK_JOYSTICK_BUTTON_2",
+            "label": "Button 2",
             "aliases": [
                 "JS_2"
             ]
@@ -24,6 +27,7 @@
         "0x7403": {
             "group": "joystick",
             "key": "QK_JOYSTICK_BUTTON_3",
+            "label": "Button 3",
             "aliases": [
                 "JS_3"
             ]
@@ -31,6 +35,7 @@
         "0x7404": {
             "group": "joystick",
             "key": "QK_JOYSTICK_BUTTON_4",
+            "label": "Button 4",
             "aliases": [
                 "JS_4"
             ]
@@ -38,6 +43,7 @@
         "0x7405": {
             "group": "joystick",
             "key": "QK_JOYSTICK_BUTTON_5",
+            "label": "Button 5",
             "aliases": [
                 "JS_5"
             ]
@@ -45,6 +51,7 @@
         "0x7406": {
             "group": "joystick",
             "key": "QK_JOYSTICK_BUTTON_6",
+            "label": "Button 6",
             "aliases": [
                 "JS_6"
             ]
@@ -52,6 +59,7 @@
         "0x7407": {
             "group": "joystick",
             "key": "QK_JOYSTICK_BUTTON_7",
+            "label": "Button 7",
             "aliases": [
                 "JS_7"
             ]
@@ -59,6 +67,7 @@
         "0x7408": {
             "group": "joystick",
             "key": "QK_JOYSTICK_BUTTON_8",
+            "label": "Button 8",
             "aliases": [
                 "JS_8"
             ]
@@ -66,6 +75,7 @@
         "0x7409": {
             "group": "joystick",
             "key": "QK_JOYSTICK_BUTTON_9",
+            "label": "Button 9",
             "aliases": [
                 "JS_9"
             ]
@@ -73,6 +83,7 @@
         "0x740A": {
             "group": "joystick",
             "key": "QK_JOYSTICK_BUTTON_10",
+            "label": "Button 10",
             "aliases": [
                 "JS_10"
             ]
@@ -80,6 +91,7 @@
         "0x740B": {
             "group": "joystick",
             "key": "QK_JOYSTICK_BUTTON_11",
+            "label": "Button 11",
             "aliases": [
                 "JS_11"
             ]
@@ -87,6 +99,7 @@
         "0x740C": {
             "group": "joystick",
             "key": "QK_JOYSTICK_BUTTON_12",
+            "label": "Button 12",
             "aliases": [
                 "JS_12"
             ]
@@ -94,6 +107,7 @@
         "0x740D": {
             "group": "joystick",
             "key": "QK_JOYSTICK_BUTTON_13",
+            "label": "Button 13",
             "aliases": [
                 "JS_13"
             ]
@@ -101,6 +115,7 @@
         "0x740E": {
             "group": "joystick",
             "key": "QK_JOYSTICK_BUTTON_14",
+            "label": "Button 14",
             "aliases": [
                 "JS_14"
             ]
@@ -108,6 +123,7 @@
         "0x740F": {
             "group": "joystick",
             "key": "QK_JOYSTICK_BUTTON_15",
+            "label": "Button 15",
             "aliases": [
                 "JS_15"
             ]
@@ -115,6 +131,7 @@
         "0x7410": {
             "group": "joystick",
             "key": "QK_JOYSTICK_BUTTON_16",
+            "label": "Button 16",
             "aliases": [
                 "JS_16"
             ]
@@ -122,6 +139,7 @@
         "0x7411": {
             "group": "joystick",
             "key": "QK_JOYSTICK_BUTTON_17",
+            "label": "Button 17",
             "aliases": [
                 "JS_17"
             ]
@@ -129,6 +147,7 @@
         "0x7412": {
             "group": "joystick",
             "key": "QK_JOYSTICK_BUTTON_18",
+            "label": "Button 18",
             "aliases": [
                 "JS_18"
             ]
@@ -136,6 +155,7 @@
         "0x7413": {
             "group": "joystick",
             "key": "QK_JOYSTICK_BUTTON_19",
+            "label": "Button 19",
             "aliases": [
                 "JS_19"
             ]
@@ -143,6 +163,7 @@
         "0x7414": {
             "group": "joystick",
             "key": "QK_JOYSTICK_BUTTON_20",
+            "label": "Button 20",
             "aliases": [
                 "JS_20"
             ]
@@ -150,6 +171,7 @@
         "0x7415": {
             "group": "joystick",
             "key": "QK_JOYSTICK_BUTTON_21",
+            "label": "Button 21",
             "aliases": [
                 "JS_21"
             ]
@@ -157,6 +179,7 @@
         "0x7416": {
             "group": "joystick",
             "key": "QK_JOYSTICK_BUTTON_22",
+            "label": "Button 22",
             "aliases": [
                 "JS_22"
             ]
@@ -164,6 +187,7 @@
         "0x7417": {
             "group": "joystick",
             "key": "QK_JOYSTICK_BUTTON_23",
+            "label": "Button 23",
             "aliases": [
                 "JS_23"
             ]
@@ -171,6 +195,7 @@
         "0x7418": {
             "group": "joystick",
             "key": "QK_JOYSTICK_BUTTON_24",
+            "label": "Button 24",
             "aliases": [
                 "JS_24"
             ]
@@ -178,6 +203,7 @@
         "0x7419": {
             "group": "joystick",
             "key": "QK_JOYSTICK_BUTTON_25",
+            "label": "Button 25",
             "aliases": [
                 "JS_25"
             ]
@@ -185,6 +211,7 @@
         "0x741A": {
             "group": "joystick",
             "key": "QK_JOYSTICK_BUTTON_26",
+            "label": "Button 26",
             "aliases": [
                 "JS_26"
             ]
@@ -192,6 +219,7 @@
         "0x741B": {
             "group": "joystick",
             "key": "QK_JOYSTICK_BUTTON_27",
+            "label": "Button 27",
             "aliases": [
                 "JS_27"
             ]
@@ -199,6 +227,7 @@
         "0x741C": {
             "group": "joystick",
             "key": "QK_JOYSTICK_BUTTON_28",
+            "label": "Button 28",
             "aliases": [
                 "JS_28"
             ]
@@ -206,6 +235,7 @@
         "0x741D": {
             "group": "joystick",
             "key": "QK_JOYSTICK_BUTTON_29",
+            "label": "Button 29",
             "aliases": [
                 "JS_29"
             ]
@@ -213,6 +243,7 @@
         "0x741E": {
             "group": "joystick",
             "key": "QK_JOYSTICK_BUTTON_30",
+            "label": "Button 30",
             "aliases": [
                 "JS_30"
             ]
@@ -220,6 +251,7 @@
         "0x741F": {
             "group": "joystick",
             "key": "QK_JOYSTICK_BUTTON_31",
+            "label": "Button 31",
             "aliases": [
                 "JS_31"
             ]

data/constants/keycodes/keycodes_0.0.1_lighting.hjson

@@ -3,6 +3,7 @@
         "0x7800": {
             "group": "backlight",
             "key": "QK_BACKLIGHT_ON",
+            "label": "Backlight On",
             "aliases": [
                 "BL_ON"
             ]
@@ -10,6 +11,7 @@
         "0x7801": {
             "group": "backlight",
             "key": "QK_BACKLIGHT_OFF",
+            "label": "Backlight Off",
             "aliases": [
                 "BL_OFF"
             ]
@@ -17,6 +19,7 @@
         "0x7802": {
             "group": "backlight",
             "key": "QK_BACKLIGHT_TOGGLE",
+            "label": "Toggle Backlight",
             "aliases": [
                 "BL_TOGG"
             ]
@@ -24,6 +27,7 @@
         "0x7803": {
             "group": "backlight",
             "key": "QK_BACKLIGHT_DOWN",
+            "label": "Backlight Down",
             "aliases": [
                 "BL_DOWN"
             ]
@@ -31,6 +35,7 @@
         "0x7804": {
             "group": "backlight",
             "key": "QK_BACKLIGHT_UP",
+            "label": "Backlight Up",
             "aliases": [
                 "BL_UP"
             ]
@@ -38,6 +43,7 @@
         "0x7805": {
             "group": "backlight",
             "key": "QK_BACKLIGHT_STEP",
+            "label": "Backlight Step",
             "aliases": [
                 "BL_STEP"
             ]
@@ -45,6 +51,7 @@
         "0x7806": {
             "group": "backlight",
             "key": "QK_BACKLIGHT_TOGGLE_BREATHING",
+            "label": "Toggle Breathing",
             "aliases": [
                 "BL_BRTG"
             ]

data/constants/keycodes/keycodes_0.0.1_macro.hjson

@@ -1,9 +1,9 @@
 {
     "keycodes": {
-
         "0x7700": {
             "group": "macro",
             "key": "QK_MACRO_0",
+            "label": "Macro 0",
             "aliases": [
                 "MC_0"
             ]
@@ -11,6 +11,7 @@
         "0x7701": {
             "group": "macro",
             "key": "QK_MACRO_1",
+            "label": "Macro 1",
             "aliases": [
                 "MC_1"
             ]
@@ -18,6 +19,7 @@
         "0x7702": {
             "group": "macro",
             "key": "QK_MACRO_2",
+            "label": "Macro 2",
             "aliases": [
                 "MC_2"
             ]
@@ -25,6 +27,7 @@
         "0x7703": {
             "group": "macro",
             "key": "QK_MACRO_3",
+            "label": "Macro 3",
             "aliases": [
                 "MC_3"
             ]
@@ -32,6 +35,7 @@
         "0x7704": {
             "group": "macro",
             "key": "QK_MACRO_4",
+            "label": "Macro 4",
             "aliases": [
                 "MC_4"
             ]
@@ -39,6 +43,7 @@
         "0x7705": {
             "group": "macro",
             "key": "QK_MACRO_5",
+            "label": "Macro 5",
             "aliases": [
                 "MC_5"
             ]
@@ -46,6 +51,7 @@
         "0x7706": {
             "group": "macro",
             "key": "QK_MACRO_6",
+            "label": "Macro 6",
             "aliases": [
                 "MC_6"
             ]
@@ -53,6 +59,7 @@
         "0x7707": {
             "group": "macro",
             "key": "QK_MACRO_7",
+            "label": "Macro 7",
             "aliases": [
                 "MC_7"
             ]
@@ -60,6 +67,7 @@
         "0x7708": {
             "group": "macro",
             "key": "QK_MACRO_8",
+            "label": "Macro 8",
             "aliases": [
                 "MC_8"
             ]
@@ -67,6 +75,7 @@
         "0x7709": {
             "group": "macro",
             "key": "QK_MACRO_9",
+            "label": "Macro 9",
             "aliases": [
                 "MC_9"
             ]
@@ -74,6 +83,7 @@
         "0x770A": {
             "group": "macro",
             "key": "QK_MACRO_10",
+            "label": "Macro 10",
             "aliases": [
                 "MC_10"
             ]
@@ -81,6 +91,7 @@
         "0x770B": {
             "group": "macro",
             "key": "QK_MACRO_11",
+            "label": "Macro 11",
             "aliases": [
                 "MC_11"
             ]
@@ -88,6 +99,7 @@
         "0x770C": {
             "group": "macro",
             "key": "QK_MACRO_12",
+            "label": "Macro 12",
             "aliases": [
                 "MC_12"
             ]
@@ -95,6 +107,7 @@
         "0x770D": {
             "group": "macro",
             "key": "QK_MACRO_13",
+            "label": "Macro 13",
             "aliases": [
                 "MC_13"
             ]
@@ -102,6 +115,7 @@
         "0x770E": {
             "group": "macro",
             "key": "QK_MACRO_14",
+            "label": "Macro 14",
             "aliases": [
                 "MC_14"
             ]
@@ -109,6 +123,7 @@
         "0x770F": {
             "group": "macro",
             "key": "QK_MACRO_15",
+            "label": "Macro 15",
             "aliases": [
                 "MC_15"
             ]
@@ -116,6 +131,7 @@
         "0x7710": {
             "group": "macro",
             "key": "QK_MACRO_16",
+            "label": "Macro 16",
             "aliases": [
                 "MC_16"
             ]
@@ -123,6 +139,7 @@
         "0x7711": {
             "group": "macro",
             "key": "QK_MACRO_17",
+            "label": "Macro 17",
             "aliases": [
                 "MC_17"
             ]
@@ -130,6 +147,7 @@
         "0x7712": {
             "group": "macro",
             "key": "QK_MACRO_18",
+            "label": "Macro 18",
             "aliases": [
                 "MC_18"
             ]
@@ -137,6 +155,7 @@
         "0x7713": {
             "group": "macro",
             "key": "QK_MACRO_19",
+            "label": "Macro 19",
             "aliases": [
                 "MC_19"
             ]
@@ -144,6 +163,7 @@
         "0x7714": {
             "group": "macro",
             "key": "QK_MACRO_20",
+            "label": "Macro 20",
             "aliases": [
                 "MC_20"
             ]
@@ -151,6 +171,7 @@
         "0x7715": {
             "group": "macro",
             "key": "QK_MACRO_21",
+            "label": "Macro 21",
             "aliases": [
                 "MC_21"
             ]
@@ -158,6 +179,7 @@
         "0x7716": {
             "group": "macro",
             "key": "QK_MACRO_22",
+            "label": "Macro 22",
             "aliases": [
                 "MC_22"
             ]
@@ -165,6 +187,7 @@
         "0x7717": {
             "group": "macro",
             "key": "QK_MACRO_23",
+            "label": "Macro 23",
             "aliases": [
                 "MC_23"
             ]
@@ -172,6 +195,7 @@
         "0x7718": {
             "group": "macro",
             "key": "QK_MACRO_24",
+            "label": "Macro 24",
             "aliases": [
                 "MC_24"
             ]
@@ -179,6 +203,7 @@
         "0x7719": {
             "group": "macro",
             "key": "QK_MACRO_25",
+            "label": "Macro 25",
             "aliases": [
                 "MC_25"
             ]
@@ -186,6 +211,7 @@
         "0x771A": {
             "group": "macro",
             "key": "QK_MACRO_26",
+            "label": "Macro 26",
             "aliases": [
                 "MC_26"
             ]
@@ -193,6 +219,7 @@
         "0x771B": {
             "group": "macro",
             "key": "QK_MACRO_27",
+            "label": "Macro 27",
             "aliases": [
                 "MC_27"
             ]
@@ -200,6 +227,7 @@
         "0x771C": {
             "group": "macro",
             "key": "QK_MACRO_28",
+            "label": "Macro 28",
             "aliases": [
                 "MC_28"
             ]
@@ -207,6 +235,7 @@
         "0x771D": {
             "group": "macro",
             "key": "QK_MACRO_29",
+            "label": "Macro 29",
             "aliases": [
                 "MC_29"
             ]
@@ -214,6 +243,7 @@
         "0x771E": {
             "group": "macro",
             "key": "QK_MACRO_30",
+            "label": "Macro 30",
             "aliases": [
                 "MC_30"
             ]
@@ -221,6 +251,7 @@
         "0x771F": {
             "group": "macro",
             "key": "QK_MACRO_31",
+            "label": "Macro 31",
             "aliases": [
                 "MC_31"
             ]

data/constants/keycodes/keycodes_0.0.1_programmable_button.hjson

@@ -3,6 +3,7 @@
         "0x7440": {
             "group": "programmable_button",
             "key": "QK_PROGRAMMABLE_BUTTON_1",
+            "label": "Button 1",
             "aliases": [
                 "PB_1"
             ]
@@ -10,6 +11,7 @@
         "0x7441": {
             "group": "programmable_button",
             "key": "QK_PROGRAMMABLE_BUTTON_2",
+            "label": "Button 2",
             "aliases": [
                 "PB_2"
             ]
@@ -17,6 +19,7 @@
         "0x7442": {
             "group": "programmable_button",
             "key": "QK_PROGRAMMABLE_BUTTON_3",
+            "label": "Button 3",
             "aliases": [
                 "PB_3"
             ]
@@ -24,6 +27,7 @@
         "0x7443": {
             "group": "programmable_button",
             "key": "QK_PROGRAMMABLE_BUTTON_4",
+            "label": "Button 4",
             "aliases": [
                 "PB_4"
             ]
@@ -31,6 +35,7 @@
         "0x7444": {
             "group": "programmable_button",
             "key": "QK_PROGRAMMABLE_BUTTON_5",
+            "label": "Button 5",
             "aliases": [
                 "PB_5"
             ]
@@ -38,6 +43,7 @@
         "0x7445": {
             "group": "programmable_button",
             "key": "QK_PROGRAMMABLE_BUTTON_6",
+            "label": "Button 6",
             "aliases": [
                 "PB_6"
             ]
@@ -45,6 +51,7 @@
         "0x7446": {
             "group": "programmable_button",
             "key": "QK_PROGRAMMABLE_BUTTON_7",
+            "label": "Button 7",
             "aliases": [
                 "PB_7"
             ]
@@ -52,6 +59,7 @@
         "0x7447": {
             "group": "programmable_button",
             "key": "QK_PROGRAMMABLE_BUTTON_8",
+            "label": "Button 8",
             "aliases": [
                 "PB_8"
             ]
@@ -59,6 +67,7 @@
         "0x7448": {
             "group": "programmable_button",
             "key": "QK_PROGRAMMABLE_BUTTON_9",
+            "label": "Button 9",
             "aliases": [
                 "PB_9"
             ]
@@ -66,6 +75,7 @@
         "0x7449": {
             "group": "programmable_button",
             "key": "QK_PROGRAMMABLE_BUTTON_10",
+            "label": "Button 10",
             "aliases": [
                 "PB_10"
             ]
@@ -73,6 +83,7 @@
         "0x744A": {
             "group": "programmable_button",
             "key": "QK_PROGRAMMABLE_BUTTON_11",
+            "label": "Button 11",
             "aliases": [
                 "PB_11"
             ]
@@ -80,6 +91,7 @@
         "0x744B": {
             "group": "programmable_button",
             "key": "QK_PROGRAMMABLE_BUTTON_12",
+            "label": "Button 12",
             "aliases": [
                 "PB_12"
             ]
@@ -87,6 +99,7 @@
         "0x744C": {
             "group": "programmable_button",
             "key": "QK_PROGRAMMABLE_BUTTON_13",
+            "label": "Button 13",
             "aliases": [
                 "PB_13"
             ]
@@ -94,6 +107,7 @@
         "0x744D": {
             "group": "programmable_button",
             "key": "QK_PROGRAMMABLE_BUTTON_14",
+            "label": "Button 14",
             "aliases": [
                 "PB_14"
             ]
@@ -101,6 +115,7 @@
         "0x744E": {
             "group": "programmable_button",
             "key": "QK_PROGRAMMABLE_BUTTON_15",
+            "label": "Button 15",
             "aliases": [
                 "PB_15"
             ]
@@ -108,6 +123,7 @@
         "0x744F": {
             "group": "programmable_button",
             "key": "QK_PROGRAMMABLE_BUTTON_16",
+            "label": "Button 16",
             "aliases": [
                 "PB_16"
             ]
@@ -115,6 +131,7 @@
         "0x7450": {
             "group": "programmable_button",
             "key": "QK_PROGRAMMABLE_BUTTON_17",
+            "label": "Button 17",
             "aliases": [
                 "PB_17"
             ]
@@ -122,6 +139,7 @@
         "0x7451": {
             "group": "programmable_button",
             "key": "QK_PROGRAMMABLE_BUTTON_18",
+            "label": "Button 18",
             "aliases": [
                 "PB_18"
             ]
@@ -129,6 +147,7 @@
         "0x7452": {
             "group": "programmable_button",
             "key": "QK_PROGRAMMABLE_BUTTON_19",
+            "label": "Button 19",
             "aliases": [
                 "PB_19"
             ]
@@ -136,6 +155,7 @@
         "0x7453": {
             "group": "programmable_button",
             "key": "QK_PROGRAMMABLE_BUTTON_20",
+            "label": "Button 20",
             "aliases": [
                 "PB_20"
             ]
@@ -143,6 +163,7 @@
         "0x7454": {
             "group": "programmable_button",
             "key": "QK_PROGRAMMABLE_BUTTON_21",
+            "label": "Button 21",
             "aliases": [
                 "PB_21"
             ]
@@ -150,6 +171,7 @@
         "0x7455": {
             "group": "programmable_button",
             "key": "QK_PROGRAMMABLE_BUTTON_22",
+            "label": "Button 22",
             "aliases": [
                 "PB_22"
             ]
@@ -157,6 +179,7 @@
         "0x7456": {
             "group": "programmable_button",
             "key": "QK_PROGRAMMABLE_BUTTON_23",
+            "label": "Button 23",
             "aliases": [
                 "PB_23"
             ]
@@ -164,6 +187,7 @@
         "0x7457": {
             "group": "programmable_button",
             "key": "QK_PROGRAMMABLE_BUTTON_24",
+            "label": "Button 24",
             "aliases": [
                 "PB_24"
             ]
@@ -171,6 +195,7 @@
         "0x7458": {
             "group": "programmable_button",
             "key": "QK_PROGRAMMABLE_BUTTON_25",
+            "label": "Button 25",
             "aliases": [
                 "PB_25"
             ]
@@ -178,6 +203,7 @@
         "0x7459": {
             "group": "programmable_button",
             "key": "QK_PROGRAMMABLE_BUTTON_26",
+            "label": "Button 26",
             "aliases": [
                 "PB_26"
             ]
@@ -185,6 +211,7 @@
         "0x745A": {
             "group": "programmable_button",
             "key": "QK_PROGRAMMABLE_BUTTON_27",
+            "label": "Button 27",
             "aliases": [
                 "PB_27"
             ]
@@ -192,6 +219,7 @@
         "0x745B": {
             "group": "programmable_button",
             "key": "QK_PROGRAMMABLE_BUTTON_28",
+            "label": "Button 28",
             "aliases": [
                 "PB_28"
             ]
@@ -199,6 +227,7 @@
         "0x745C": {
             "group": "programmable_button",
             "key": "QK_PROGRAMMABLE_BUTTON_29",
+            "label": "Button 29",
             "aliases": [
                 "PB_29"
             ]
@@ -206,6 +235,7 @@
         "0x745D": {
             "group": "programmable_button",
             "key": "QK_PROGRAMMABLE_BUTTON_30",
+            "label": "Button 30",
             "aliases": [
                 "PB_30"
             ]
@@ -213,6 +243,7 @@
         "0x745E": {
             "group": "programmable_button",
             "key": "QK_PROGRAMMABLE_BUTTON_31",
+            "label": "Button 31",
             "aliases": [
                 "PB_31"
             ]
@@ -220,6 +251,7 @@
         "0x745F": {
             "group": "programmable_button",
             "key": "QK_PROGRAMMABLE_BUTTON_32",
+            "label": "Button 32",
             "aliases": [
                 "PB_32"
             ]

data/constants/keycodes/keycodes_0.0.1_quantum.hjson

@@ -3,6 +3,7 @@
         "0x7C00": {
             "group": "quantum",
             "key": "QK_BOOTLOADER",
+            "label": "Bootloader",
             "aliases": [
                 "QK_BOOT"
             ]
@@ -10,6 +11,7 @@
         "0x7C01": {
             "group": "quantum",
             "key": "QK_REBOOT",
+            "label": "Reboot",
             "aliases": [
                 "QK_RBT"
             ]
@@ -17,6 +19,7 @@
         "0x7C02": {
             "group": "quantum",
             "key": "QK_DEBUG_TOGGLE",
+            "label": "Toggle Debug",
             "aliases": [
                 "DB_TOGG"
             ]
@@ -24,18 +27,21 @@
         "0x7C03": {
             "group": "quantum",
             "key": "QK_CLEAR_EEPROM",
+            "label": "Clear EEPROM",
             "aliases": [
                 "EE_CLR"
             ]
         },
         "0x7C04": {
             "group": "quantum",
-            "key": "QK_MAKE"
+            "key": "QK_MAKE",
+            "label": "Make"
         },
 
         "0x7C10": {
             "group": "quantum",
             "key": "QK_AUTO_SHIFT_DOWN",
+            "label": "Auto Shift Down",
             "aliases": [
                 "AS_DOWN"
             ]
@@ -43,6 +49,7 @@
         "0x7C11": {
             "group": "quantum",
             "key": "QK_AUTO_SHIFT_UP",
+            "label": "Auto Shift Up",
             "aliases": [
                 "AS_UP"
             ]
@@ -50,6 +57,7 @@
         "0x7C12": {
             "group": "quantum",
             "key": "QK_AUTO_SHIFT_REPORT",
+            "label": "Auto Shift Report",
             "aliases": [
                 "AS_RPT"
             ]
@@ -57,6 +65,7 @@
         "0x7C13": {
             "group": "quantum",
             "key": "QK_AUTO_SHIFT_ON",
+            "label": "Auto Shift On",
             "aliases": [
                 "AS_ON"
             ]
@@ -64,6 +73,7 @@
         "0x7C14": {
             "group": "quantum",
             "key": "QK_AUTO_SHIFT_OFF",
+            "label": "Auto Shift Off",
             "aliases": [
                 "AS_OFF"
             ]
@@ -71,6 +81,7 @@
         "0x7C15": {
             "group": "quantum",
             "key": "QK_AUTO_SHIFT_TOGGLE",
+            "label": "Toggle Auto Shift",
             "aliases": [
                 "AS_TOGG"
             ]
@@ -79,6 +90,7 @@
         "0x7C16": {
             "group": "quantum",
             "key": "QK_GRAVE_ESCAPE",
+            "label": "Grave Esc",
             "aliases": [
                 "QK_GESC"
             ]
@@ -95,6 +107,7 @@
         "0x7C18": {
             "group": "quantum",
             "key": "QK_SPACE_CADET_LEFT_CTRL_PARENTHESIS_OPEN",
+            "label": "LCtl/(",
             "aliases": [
                 "SC_LCPO"
             ]
@@ -102,6 +115,7 @@
         "0x7C19": {
             "group": "quantum",
             "key": "QK_SPACE_CADET_RIGHT_CTRL_PARENTHESIS_CLOSE",
+            "label": "RCtl/)",
             "aliases": [
                 "SC_RCPC"
             ]
@@ -109,6 +123,7 @@
         "0x7C1A": {
             "group": "quantum",
             "key": "QK_SPACE_CADET_LEFT_SHIFT_PARENTHESIS_OPEN",
+            "label": "LSft/)",
             "aliases": [
                 "SC_LSPO"
             ]
@@ -116,6 +131,7 @@
         "0x7C1B": {
             "group": "quantum",
             "key": "QK_SPACE_CADET_RIGHT_SHIFT_PARENTHESIS_CLOSE",
+            "label": "RSft/)",
             "aliases": [
                 "SC_RSPC"
             ]
@@ -123,6 +139,7 @@
         "0x7C1C": {
             "group": "quantum",
             "key": "QK_SPACE_CADET_LEFT_ALT_PARENTHESIS_OPEN",
+            "label": "LAlt/(",
             "aliases": [
                 "SC_LAPO"
             ]
@@ -130,6 +147,7 @@
         "0x7C1D": {
             "group": "quantum",
             "key": "QK_SPACE_CADET_RIGHT_ALT_PARENTHESIS_CLOSE",
+            "label": "RAlt/)",
             "aliases": [
                 "SC_RAPC"
             ]
@@ -137,6 +155,7 @@
         "0x7C1E": {
             "group": "quantum",
             "key": "QK_SPACE_CADET_RIGHT_SHIFT_ENTER",
+            "label": "RSft/Ent",
             "aliases": [
                 "SC_SENT"
             ]
@@ -167,6 +186,7 @@
         "0x7C30": {
             "group": "quantum",
             "key": "QK_UNICODE_MODE_NEXT",
+            "label": "Unicode Mode Next",
             "aliases": [
                 "UC_NEXT"
             ]
@@ -174,6 +194,7 @@
         "0x7C31": {
             "group": "quantum",
             "key": "QK_UNICODE_MODE_PREVIOUS",
+            "label": "Unicode Mode Previous",
             "aliases": [
                 "UC_PREV"
             ]
@@ -181,6 +202,7 @@
         "0x7C32": {
             "group": "quantum",
             "key": "QK_UNICODE_MODE_MACOS",
+            "label": "Unicode Mode macOS",
             "aliases": [
                 "UC_MAC"
             ]
@@ -188,6 +210,7 @@
         "0x7C33": {
             "group": "quantum",
             "key": "QK_UNICODE_MODE_LINUX",
+            "label": "Unicode Mode Linux",
             "aliases": [
                 "UC_LINX"
             ]
@@ -195,6 +218,7 @@
         "0x7C34": {
             "group": "quantum",
             "key": "QK_UNICODE_MODE_WINDOWS",
+            "label": "Unicode Mode Windows",
             "aliases": [
                 "UC_WIN"
             ]
@@ -202,6 +226,7 @@
         "0x7C35": {
             "group": "quantum",
             "key": "QK_UNICODE_MODE_BSD",
+            "label": "Unicode Mode BSD",
             "aliases": [
                 "UC_BSD"
             ]
@@ -209,6 +234,7 @@
         "0x7C36": {
             "group": "quantum",
             "key": "QK_UNICODE_MODE_WINCOMPOSE",
+            "label": "Unicode Mode WinCompose",
             "aliases": [
                 "UC_WINC"
             ]
@@ -216,6 +242,7 @@
         "0x7C37": {
             "group": "quantum",
             "key": "QK_UNICODE_MODE_EMACS",
+            "label": "Unicode Mode emacs",
             "aliases": [
                 "UC_EMAC"
             ]
@@ -224,6 +251,7 @@
         "0x7C40": {
             "group": "quantum",
             "key": "QK_HAPTIC_ON",
+            "label": "Haptic On",
             "aliases": [
                 "HF_ON"
             ]
@@ -231,6 +259,7 @@
         "0x7C41": {
             "group": "quantum",
             "key": "QK_HAPTIC_OFF",
+            "label": "Haptic Off",
             "aliases": [
                 "HF_OFF"
             ]
@@ -238,6 +267,7 @@
         "0x7C42": {
             "group": "quantum",
             "key": "QK_HAPTIC_TOGGLE",
+            "label": "Toggle Haptic",
             "aliases": [
                 "HF_TOGG"
             ]
@@ -245,6 +275,7 @@
         "0x7C43": {
             "group": "quantum",
             "key": "QK_HAPTIC_RESET",
+            "label": "Haptic Reset",
             "aliases": [
                 "HF_RST"
             ]
@@ -252,6 +283,7 @@
         "0x7C44": {
             "group": "quantum",
             "key": "QK_HAPTIC_FEEDBACK_TOGGLE",
+            "label": "Toggle Haptic Feedback",
             "aliases": [
                 "HF_FDBK"
             ]
@@ -259,6 +291,7 @@
         "0x7C45": {
             "group": "quantum",
             "key": "QK_HAPTIC_BUZZ_TOGGLE",
+            "label": "Toggle Haptic Buzz",
             "aliases": [
                 "HF_BUZZ"
             ]
@@ -266,6 +299,7 @@
         "0x7C46": {
             "group": "quantum",
             "key": "QK_HAPTIC_MODE_NEXT",
+            "label": "Haptic Mode Next",
             "aliases": [
                 "HF_NEXT"
             ]
@@ -273,6 +307,7 @@
         "0x7C47": {
             "group": "quantum",
             "key": "QK_HAPTIC_MODE_PREVIOUS",
+            "label": "Haptic Mode Previous",
             "aliases": [
                 "HF_PREV"
             ]
@@ -280,6 +315,7 @@
         "0x7C48": {
             "group": "quantum",
             "key": "QK_HAPTIC_CONTINUOUS_TOGGLE",
+            "label": "Toggle Haptic Continuous",
             "aliases": [
                 "HF_CONT"
             ]
@@ -287,6 +323,7 @@
         "0x7C49": {
             "group": "quantum",
             "key": "QK_HAPTIC_CONTINUOUS_UP",
+            "label": "Haptic Continuous Up",
             "aliases": [
                 "HF_CONU"
             ]
@@ -294,6 +331,7 @@
         "0x7C4A": {
             "group": "quantum",
             "key": "QK_HAPTIC_CONTINUOUS_DOWN",
+            "label": "Haptic Continuous Down",
             "aliases": [
                 "HF_COND"
             ]
@@ -301,6 +339,7 @@
         "0x7C4B": {
             "group": "quantum",
             "key": "QK_HAPTIC_DWELL_UP",
+            "label": "Haptic Dwell Up",
             "aliases": [
                 "HF_DWLU"
             ]
@@ -308,6 +347,7 @@
         "0x7C4C": {
             "group": "quantum",
             "key": "QK_HAPTIC_DWELL_DOWN",
+            "label": "Haptic Dwell Down",
             "aliases": [
                 "HF_DWLD"
             ]
@@ -316,6 +356,7 @@
         "0x7C50": {
             "group": "quantum",
             "key": "QK_COMBO_ON",
+            "label": "Combo On",
             "aliases": [
                 "CM_ON"
             ]
@@ -323,6 +364,7 @@
         "0x7C51": {
             "group": "quantum",
             "key": "QK_COMBO_OFF",
+            "label": "Combo Off",
             "aliases": [
                 "CM_OFF"
             ]
@@ -330,6 +372,7 @@
         "0x7C52": {
             "group": "quantum",
             "key": "QK_COMBO_TOGGLE",
+            "label": "Toggle Combo",
             "aliases": [
                 "CM_TOGG"
             ]
@@ -338,6 +381,7 @@
         "0x7C53": {
             "group": "quantum",
             "key": "QK_DYNAMIC_MACRO_RECORD_START_1",
+            "label": "Dynamic Macro Record 1",
             "aliases": [
                 "DM_REC1"
             ]
@@ -345,6 +389,7 @@
         "0x7C54": {
             "group": "quantum",
             "key": "QK_DYNAMIC_MACRO_RECORD_START_2",
+            "label": "Dynamic Macro Record 2",
             "aliases": [
                 "DM_REC2"
             ]
@@ -352,6 +397,7 @@
         "0x7C55": {
             "group": "quantum",
             "key": "QK_DYNAMIC_MACRO_RECORD_STOP",
+            "label": "Dynamic Macro Stop Recording",
             "aliases": [
                 "DM_RSTP"
             ]
@@ -359,6 +405,7 @@
         "0x7C56": {
             "group": "quantum",
             "key": "QK_DYNAMIC_MACRO_PLAY_1",
+            "label": "Dynamic Macro Play 1",
             "aliases": [
                 "DM_PLY1"
             ]
@@ -366,6 +413,7 @@
         "0x7C57": {
             "group": "quantum",
             "key": "QK_DYNAMIC_MACRO_PLAY_2",
+            "label": "Dynamic Macro Play 2",
             "aliases": [
                 "DM_PLY2"
             ]
@@ -374,6 +422,7 @@
         "0x7C58": {
             "group": "quantum",
             "key": "QK_LEADER",
+            "label": "Leader",
             "aliases": [
                 "QK_LEAD"
             ]
@@ -381,12 +430,14 @@
 
         "0x7C59": {
             "group": "quantum",
-            "key": "QK_LOCK"
+            "key": "QK_LOCK",
+            "label": "Lock"
         },
 
         "0x7C5A": {
             "group": "quantum",
             "key": "QK_ONE_SHOT_ON",
+            "label": "One Shot On",
             "aliases": [
                 "OS_ON"
             ]
@@ -394,6 +445,7 @@
         "0x7C5B": {
             "group": "quantum",
             "key": "QK_ONE_SHOT_OFF",
+            "label": "One Shot Off",
             "aliases": [
                 "OS_OFF"
             ]
@@ -401,6 +453,7 @@
         "0x7C5C": {
             "group": "quantum",
             "key": "QK_ONE_SHOT_TOGGLE",
+            "label": "Toggle One Shot",
             "aliases": [
                 "OS_TOGG"
             ]
@@ -409,6 +462,7 @@
         "0x7C5D": {
             "group": "quantum",
             "key": "QK_KEY_OVERRIDE_TOGGLE",
+            "label": "Toggle Key Overrides",
             "aliases": [
                 "KO_TOGG"
             ]
@@ -416,6 +470,7 @@
         "0x7C5E": {
             "group": "quantum",
             "key": "QK_KEY_OVERRIDE_ON",
+            "label": "Key Overrides On",
             "aliases": [
                 "KO_ON"
             ]
@@ -423,6 +478,7 @@
         "0x7C5F": {
             "group": "quantum",
             "key": "QK_KEY_OVERRIDE_OFF",
+            "label": "Key Overrides Off",
             "aliases": [
                 "KO_OFF"
             ]
@@ -431,6 +487,7 @@
         "0x7C60": {
             "group": "quantum",
             "key": "QK_SECURE_LOCK",
+            "label": "Lock",
             "aliases": [
                 "SE_LOCK"
             ]
@@ -438,6 +495,7 @@
         "0x7C61": {
             "group": "quantum",
             "key": "QK_SECURE_UNLOCK",
+            "label": "Unlock",
             "aliases": [
                 "SE_UNLK"
             ]
@@ -445,6 +503,7 @@
         "0x7C62": {
             "group": "quantum",
             "key": "QK_SECURE_TOGGLE",
+            "label": "Toggle Lock",
             "aliases": [
                 "SE_TOGG"
             ]
@@ -452,6 +511,7 @@
         "0x7C63": {
             "group": "quantum",
             "key": "QK_SECURE_REQUEST",
+            "label": "Request Unlock",
             "aliases": [
                 "SE_REQ"
             ]
@@ -460,6 +520,7 @@
         "0x7C70": {
             "group": "quantum",
             "key": "QK_DYNAMIC_TAPPING_TERM_PRINT",
+            "label": "Print Dynamic Tapping Term",
             "aliases": [
                 "DT_PRNT"
             ]
@@ -467,6 +528,7 @@
         "0x7C71": {
             "group": "quantum",
             "key": "QK_DYNAMIC_TAPPING_TERM_UP",
+            "label": "Dynamic Tapping Term Up",
             "aliases": [
                 "DT_UP"
             ]
@@ -474,6 +536,7 @@
         "0x7C72": {
             "group": "quantum",
             "key": "QK_DYNAMIC_TAPPING_TERM_DOWN",
+            "label": "Dynamic Tapping Term Down",
             "aliases": [
                 "DT_DOWN"
             ]
@@ -482,6 +545,7 @@
         "0x7C73": {
             "group": "quantum",
             "key": "QK_CAPS_WORD_TOGGLE",
+            "label": "Toggle Caps Word",
             "aliases": [
                 "CW_TOGG"
             ]
@@ -490,6 +554,7 @@
         "0x7C74": {
             "group": "quantum",
             "key": "QK_AUTOCORRECT_ON",
+            "label": "Autocorrect On",
             "aliases": [
                 "AC_ON"
             ]
@@ -497,6 +562,7 @@
         "0x7C75": {
             "group": "quantum",
             "key": "QK_AUTOCORRECT_OFF",
+            "label": "Autocorrect Off",
             "aliases": [
                 "AC_OFF"
             ]
@@ -504,6 +570,7 @@
         "0x7C76": {
             "group": "quantum",
             "key": "QK_AUTOCORRECT_TOGGLE",
+            "label": "Toggle Autocorrect",
             "aliases": [
                 "AC_TOGG"
             ]

data/constants/keycodes/keycodes_0.0.2_basic.hjson

@@ -3,7 +3,7 @@
         "0x00C1": {
             "group": "media",
             "key": "KC_MISSION_CONTROL",
-            "label": "Open Mission Control",
+            "label": "Mission Control",
             "aliases": [
                 "KC_MCTL"
             ]
@@ -11,7 +11,7 @@
         "0x00C2": {
             "group": "media",
             "key": "KC_LAUNCHPAD",
-            "label": "Open Launchpad",
+            "label": "Launchpad",
             "aliases": [
                 "KC_LPAD"
             ]

data/constants/keycodes/keycodes_0.0.2_kb.hjson

@@ -2,131 +2,163 @@
     "keycodes": {
         "0x7E00": {
             "group": "kb",
-            "key": "QK_KB_0"
+            "key": "QK_KB_0",
+            "label": "Keyboard 0"
         },
         "0x7E01": {
             "group": "kb",
-            "key": "QK_KB_1"
+            "key": "QK_KB_1",
+            "label": "Keyboard 1"
         },
         "0x7E02": {
             "group": "kb",
-            "key": "QK_KB_2"
+            "key": "QK_KB_2",
+            "label": "Keyboard 2"
         },
         "0x7E03": {
             "group": "kb",
-            "key": "QK_KB_3"
+            "key": "QK_KB_3",
+            "label": "Keyboard 3"
         },
         "0x7E04": {
             "group": "kb",
-            "key": "QK_KB_4"
+            "key": "QK_KB_4",
+            "label": "Keyboard 4"
         },
         "0x7E05": {
             "group": "kb",
-            "key": "QK_KB_5"
+            "key": "QK_KB_5",
+            "label": "Keyboard 5"
         },
         "0x7E06": {
             "group": "kb",
-            "key": "QK_KB_6"
+            "key": "QK_KB_6",
+            "label": "Keyboard 6"
         },
         "0x7E07": {
             "group": "kb",
-            "key": "QK_KB_7"
+            "key": "QK_KB_7",
+            "label": "Keyboard 7"
         },
         "0x7E08": {
             "group": "kb",
-            "key": "QK_KB_8"
+            "key": "QK_KB_8",
+            "label": "Keyboard 8"
         },
         "0x7E09": {
             "group": "kb",
-            "key": "QK_KB_9"
+            "key": "QK_KB_9",
+            "label": "Keyboard 9"
         },
         "0x7E0A": {
             "group": "kb",
-            "key": "QK_KB_10"
+            "key": "QK_KB_10",
+            "label": "Keyboard 10"
         },
         "0x7E0B": {
             "group": "kb",
-            "key": "QK_KB_11"
+            "key": "QK_KB_11",
+            "label": "Keyboard 11"
         },
         "0x7E0C": {
             "group": "kb",
-            "key": "QK_KB_12"
+            "key": "QK_KB_12",
+            "label": "Keyboard 12"
         },
         "0x7E0D": {
             "group": "kb",
-            "key": "QK_KB_13"
+            "key": "QK_KB_13",
+            "label": "Keyboard 13"
         },
         "0x7E0E": {
             "group": "kb",
-            "key": "QK_KB_14"
+            "key": "QK_KB_14",
+            "label": "Keyboard 14"
         },
         "0x7E0F": {
             "group": "kb",
-            "key": "QK_KB_15"
+            "key": "QK_KB_15",
+            "label": "Keyboard 15"
         },
         "0x7E10": {
             "group": "kb",
-            "key": "QK_KB_16"
+            "key": "QK_KB_16",
+            "label": "Keyboard 16"
         },
         "0x7E11": {
             "group": "kb",
-            "key": "QK_KB_17"
+            "key": "QK_KB_17",
+            "label": "Keyboard 17"
         },
          "0x7E12": {
             "group": "kb",
-            "key": "QK_KB_18"
+            "key": "QK_KB_18",
+            "label": "Keyboard 18"
         },
         "0x7E13": {
             "group": "kb",
-            "key": "QK_KB_19"
+            "key": "QK_KB_19",
+            "label": "Keyboard 19"
         },
         "0x7E14": {
             "group": "kb",
-            "key": "QK_KB_20"
+            "key": "QK_KB_20",
+            "label": "Keyboard 20"
         },
         "0x7E15": {
             "group": "kb",
-            "key": "QK_KB_21"
+            "key": "QK_KB_21",
+            "label": "Keyboard 21"
         },
         "0x7E16": {
             "group": "kb",
-            "key": "QK_KB_22"
+            "key": "QK_KB_22",
+            "label": "Keyboard 22"
         },
         "0x7E17": {
             "group": "kb",
-            "key": "QK_KB_23"
+            "key": "QK_KB_23",
+            "label": "Keyboard 23"
         },
         "0x7E18": {
             "group": "kb",
-            "key": "QK_KB_24"
+            "key": "QK_KB_24",
+            "label": "Keyboard 24"
         },
         "0x7E19": {
             "group": "kb",
-            "key": "QK_KB_25"
+            "key": "QK_KB_25",
+            "label": "Keyboard 25"
         },
         "0x7E1A": {
             "group": "kb",
-            "key": "QK_KB_26"
+            "key": "QK_KB_26",
+            "label": "Keyboard 26"
         },
         "0x7E1B": {
             "group": "kb",
-            "key": "QK_KB_27"
+            "key": "QK_KB_27",
+            "label": "Keyboard 27"
         },
         "0x7E1C": {
             "group": "kb",
-            "key": "QK_KB_28"
+            "key": "QK_KB_28",
+            "label": "Keyboard 28"
         },
         "0x7E1D": {
             "group": "kb",
-            "key": "QK_KB_29"
+            "key": "QK_KB_29",
+            "label": "Keyboard 29"
         },
         "0x7E1E": {
             "group": "kb",
-            "key": "QK_KB_30"
+            "key": "QK_KB_30",
+            "label": "Keyboard 30"
         },
         "0x7E1F": {
             "group": "kb",
-            "key": "QK_KB_31"
+            "key": "QK_KB_31",
+            "label": "Keyboard 31"
         }
     }
 }

data/constants/keycodes/keycodes_0.0.2_magic.hjson

@@ -5,6 +5,7 @@
         "0x7000": {
             "group": "magic",
             "key": "QK_MAGIC_SWAP_CONTROL_CAPS_LOCK",
+            "label": "Swap LCtl⇄Caps",
             "aliases": [
                 "CL_SWAP"
             ]
@@ -12,6 +13,7 @@
         "0x7001": {
             "group": "magic",
             "key": "QK_MAGIC_UNSWAP_CONTROL_CAPS_LOCK",
+            "label": "Unswap LCtl⇄Caps",
             "aliases": [
                 "CL_NORM"
             ]
@@ -19,6 +21,7 @@
         "0x7002": {
             "group": "magic",
             "key": "QK_MAGIC_TOGGLE_CONTROL_CAPS_LOCK",
+            "label": "Toggle LCtl⇄Caps",
             "aliases": [
                 "CL_TOGG"
             ]
@@ -26,6 +29,7 @@
         "0x7003": {
             "group": "magic",
             "key": "QK_MAGIC_CAPS_LOCK_AS_CONTROL_OFF",
+            "label": "Caps≠LCtl",
             "aliases": [
                 "CL_CAPS"
             ]
@@ -33,6 +37,7 @@
         "0x7004": {
             "group": "magic",
             "key": "QK_MAGIC_CAPS_LOCK_AS_CONTROL_ON",
+            "label": "Caps=LCtl",
             "aliases": [
                 "CL_CTRL"
             ]
@@ -40,6 +45,7 @@
         "0x7005": {
             "group": "magic",
             "key": "QK_MAGIC_SWAP_LALT_LGUI",
+            "label": "Swap LAlt⇄LGUI",
             "aliases": [
                 "AG_LSWP"
             ]
@@ -47,6 +53,7 @@
         "0x7006": {
             "group": "magic",
             "key": "QK_MAGIC_UNSWAP_LALT_LGUI",
+            "label": "Unswap LAlt⇄LGUI",
             "aliases": [
                 "AG_LNRM"
             ]
@@ -54,6 +61,7 @@
         "0x7007": {
             "group": "magic",
             "key": "QK_MAGIC_SWAP_RALT_RGUI",
+            "label": "Swap RAlt⇄RGUI",
             "aliases": [
                 "AG_RSWP"
             ]
@@ -61,6 +69,7 @@
         "0x7008": {
             "group": "magic",
             "key": "QK_MAGIC_UNSWAP_RALT_RGUI",
+            "label": "Unswap RAlt⇄RGUI",
             "aliases": [
                 "AG_RNRM"
             ]
@@ -68,6 +77,7 @@
         "0x7009": {
             "group": "magic",
             "key": "QK_MAGIC_GUI_ON",
+            "label": "GUI On",
             "aliases": [
                 "GU_ON"
             ]
@@ -75,6 +85,7 @@
         "0x700A": {
             "group": "magic",
             "key": "QK_MAGIC_GUI_OFF",
+            "label": "GUI Off",
             "aliases": [
                 "GU_OFF"
             ]
@@ -82,6 +93,7 @@
         "0x700B": {
             "group": "magic",
             "key": "QK_MAGIC_TOGGLE_GUI",
+            "label": "Toggle GUI",
             "aliases": [
                 "GU_TOGG"
             ]
@@ -89,6 +101,7 @@
         "0x700C": {
             "group": "magic",
             "key": "QK_MAGIC_SWAP_GRAVE_ESC",
+            "label": "Swap `⇄Esc",
             "aliases": [
                 "GE_SWAP"
             ]
@@ -96,6 +109,7 @@
         "0x700D": {
             "group": "magic",
             "key": "QK_MAGIC_UNSWAP_GRAVE_ESC",
+            "label": "Unswap `⇄Esc",
             "aliases": [
                 "GE_NORM"
             ]
@@ -103,6 +117,7 @@
         "0x700E": {
             "group": "magic",
             "key": "QK_MAGIC_SWAP_BACKSLASH_BACKSPACE",
+            "label": "Swap \\⇄Bspc",
             "aliases": [
                 "BS_SWAP"
             ]
@@ -110,6 +125,7 @@
         "0x700F": {
             "group": "magic",
             "key": "QK_MAGIC_UNSWAP_BACKSLASH_BACKSPACE",
+            "label": "Unswap \\⇄Bspc",
             "aliases": [
                 "BS_NORM"
             ]
@@ -117,6 +133,7 @@
         "0x7010": {
             "group": "magic",
             "key": "QK_MAGIC_TOGGLE_BACKSLASH_BACKSPACE",
+            "label": "Toggle \\⇄Bspc",
             "aliases": [
                 "BS_TOGG"
             ]
@@ -124,6 +141,7 @@
         "0x7011": {
             "group": "magic",
             "key": "QK_MAGIC_NKRO_ON",
+            "label": "NKRO On",
             "aliases": [
                 "NK_ON"
             ]
@@ -131,6 +149,7 @@
         "0x7012": {
             "group": "magic",
             "key": "QK_MAGIC_NKRO_OFF",
+            "label": "NKRO Off",
             "aliases": [
                 "NK_OFF"
             ]
@@ -138,6 +157,7 @@
         "0x7013": {
             "group": "magic",
             "key": "QK_MAGIC_TOGGLE_NKRO",
+            "label": "Toggle NKRO",
             "aliases": [
                 "NK_TOGG"
             ]
@@ -145,6 +165,7 @@
         "0x7014": {
             "group": "magic",
             "key": "QK_MAGIC_SWAP_ALT_GUI",
+            "label": "Swap Alt⇄GUI",
             "aliases": [
                 "AG_SWAP"
             ]
@@ -152,6 +173,7 @@
         "0x7015": {
             "group": "magic",
             "key": "QK_MAGIC_UNSWAP_ALT_GUI",
+            "label": "Unswap Alt⇄GUI",
             "aliases": [
                 "AG_NORM"
             ]
@@ -159,6 +181,7 @@
         "0x7016": {
             "group": "magic",
             "key": "QK_MAGIC_TOGGLE_ALT_GUI",
+            "label": "Toggle Alt⇄GUI",
             "aliases": [
                 "AG_TOGG"
             ]
@@ -166,6 +189,7 @@
         "0x7017": {
             "group": "magic",
             "key": "QK_MAGIC_SWAP_LCTL_LGUI",
+            "label": "Swap LCtl⇄LGUI",
             "aliases": [
                 "CG_LSWP"
             ]
@@ -173,6 +197,7 @@
         "0x7018": {
             "group": "magic",
             "key": "QK_MAGIC_UNSWAP_LCTL_LGUI",
+            "label": "Unswap LCtl⇄LGUI",
             "aliases": [
                 "CG_LNRM"
             ]
@@ -180,6 +205,7 @@
         "0x7019": {
             "group": "magic",
             "key": "QK_MAGIC_SWAP_RCTL_RGUI",
+            "label": "Swap RCtl⇄RGUI",
             "aliases": [
                 "CG_RSWP"
             ]
@@ -187,6 +213,7 @@
         "0x701A": {
             "group": "magic",
             "key": "QK_MAGIC_UNSWAP_RCTL_RGUI",
+            "label": "Unswap RCtl⇄RGUI",
             "aliases": [
                 "CG_RNRM"
             ]
@@ -194,6 +221,7 @@
         "0x701B": {
             "group": "magic",
             "key": "QK_MAGIC_SWAP_CTL_GUI",
+            "label": "Swap Ctl⇄GUI",
             "aliases": [
                 "CG_SWAP"
             ]
@@ -201,6 +229,7 @@
         "0x701C": {
             "group": "magic",
             "key": "QK_MAGIC_UNSWAP_CTL_GUI",
+            "label": "Unswap Ctl⇄GUI",
             "aliases": [
                 "CG_NORM"
             ]
@@ -208,6 +237,7 @@
         "0x701D": {
             "group": "magic",
             "key": "QK_MAGIC_TOGGLE_CTL_GUI",
+            "label": "Toggle Ctl⇄GUI",
             "aliases": [
                 "CG_TOGG"
             ]
@@ -215,6 +245,7 @@
         "0x701E": {
             "group": "magic",
             "key": "QK_MAGIC_EE_HANDS_LEFT",
+            "label": "EE Hands Left",
             "aliases": [
                 "EH_LEFT"
             ]
@@ -222,6 +253,7 @@
         "0x701F": {
             "group": "magic",
             "key": "QK_MAGIC_EE_HANDS_RIGHT",
+            "label": "EE Hands Right",
             "aliases": [
                 "EH_RGHT"
             ]
@@ -229,6 +261,7 @@
         "0x7020": {
             "group": "magic",
             "key": "QK_MAGIC_SWAP_ESCAPE_CAPS_LOCK",
+            "label": "Swap Esc⇄Caps",
             "aliases": [
                 "EC_SWAP"
             ]
@@ -236,6 +269,7 @@
         "0x7021": {
             "group": "magic",
             "key": "QK_MAGIC_UNSWAP_ESCAPE_CAPS_LOCK",
+            "label": "Unswap Esc⇄Caps",
             "aliases": [
                 "EC_NORM"
             ]
@@ -243,6 +277,7 @@
         "0x7022": {
             "group": "magic",
             "key": "QK_MAGIC_TOGGLE_ESCAPE_CAPS_LOCK",
+            "label": "Toggle Esc⇄Caps",
             "aliases": [
                 "EC_TOGG"
             ]

data/constants/keycodes/keycodes_0.0.2_quantum.hjson

@@ -3,6 +3,7 @@
         "0x7C77": {
             "group": "quantum",
             "key": "QK_TRI_LAYER_LOWER",
+            "label": "Lower",
             "aliases": [
                 "TL_LOWR"
             ]
@@ -10,6 +11,7 @@
         "0x7C78": {
             "group": "quantum",
             "key": "QK_TRI_LAYER_UPPER",
+            "label": "Upper",
             "aliases": [
                 "TL_UPPR"
             ]

data/constants/keycodes/keycodes_0.0.2_sequencer.hjson

@@ -5,6 +5,7 @@
         "0x7200": {
             "group": "sequencer",
             "key": "QK_SEQUENCER_ON",
+            "label": "Sequencer On",
             "aliases": [
                 "SQ_ON"
             ]
@@ -12,6 +13,7 @@
         "0x7201": {
             "group": "sequencer",
             "key": "QK_SEQUENCER_OFF",
+            "label": "Sequencer Off",
             "aliases": [
                 "SQ_OFF"
             ]
@@ -19,6 +21,7 @@
         "0x7202": {
             "group": "sequencer",
             "key": "QK_SEQUENCER_TOGGLE",
+            "label": "Toggle Sequencer",
             "aliases": [
                 "SQ_TOGG"
             ]
@@ -26,6 +29,7 @@
         "0x7203": {
             "group": "sequencer",
             "key": "QK_SEQUENCER_TEMPO_DOWN",
+            "label": "Tempo Down",
             "aliases": [
                 "SQ_TMPD"
             ]
@@ -33,6 +37,7 @@
         "0x7204": {
             "group": "sequencer",
             "key": "QK_SEQUENCER_TEMPO_UP",
+            "label": "Tempo Up",
             "aliases": [
                 "SQ_TMPU"
             ]
@@ -40,6 +45,7 @@
         "0x7205": {
             "group": "sequencer",
             "key": "QK_SEQUENCER_RESOLUTION_DOWN",
+            "label": "Resolution Down",
             "aliases": [
                 "SQ_RESD"
             ]
@@ -47,6 +53,7 @@
         "0x7206": {
             "group": "sequencer",
             "key": "QK_SEQUENCER_RESOLUTION_UP",
+            "label": "Resolution Up",
             "aliases": [
                 "SQ_RESU"
             ]
@@ -54,6 +61,7 @@
         "0x7207": {
             "group": "sequencer",
             "key": "QK_SEQUENCER_STEPS_ALL",
+            "label": "All Steps",
             "aliases": [
                 "SQ_SALL"
             ]
@@ -61,6 +69,7 @@
         "0x7208": {
             "group": "sequencer",
             "key": "QK_SEQUENCER_STEPS_CLEAR",
+            "label": "Clear Steps",
             "aliases": [
                 "SQ_SCLR"
             ]

data/constants/keycodes/keycodes_0.0.2_swap_hands.hjson

@@ -3,6 +3,7 @@
         "0x56F0": {
             "group": "swap_hands",
             "key": "QK_SWAP_HANDS_TOGGLE",
+            "label": "Toggle Swap Hands",
             "aliases": [
                 "SH_TOGG"
             ]
@@ -10,6 +11,7 @@
         "0x56F1": {
             "group": "swap_hands",
             "key": "QK_SWAP_HANDS_TAP_TOGGLE",
+            "label": "Swap Hands Tap Toggle",
             "aliases": [
                 "SH_TT"
             ]
@@ -17,6 +19,7 @@
         "0x56F2": {
             "group": "swap_hands",
             "key": "QK_SWAP_HANDS_MOMENTARY_ON",
+            "label": "Swap Hands Momentary On",
             "aliases": [
                 "SH_MON"
             ]
@@ -24,6 +27,7 @@
         "0x56F3": {
             "group": "swap_hands",
             "key": "QK_SWAP_HANDS_MOMENTARY_OFF",
+            "label": "Swap Hands Momentary Off",
             "aliases": [
                 "SH_MOFF"
             ]
@@ -31,6 +35,7 @@
         "0x56F4": {
             "group": "swap_hands",
             "key": "QK_SWAP_HANDS_OFF",
+            "label": "Unswap Hands",
             "aliases": [
                 "SH_OFF"
             ]
@@ -38,6 +43,7 @@
         "0x56F5": {
             "group": "swap_hands",
             "key": "QK_SWAP_HANDS_ON",
+            "label": "Swap Hands",
             "aliases": [
                 "SH_ON"
             ]
@@ -45,6 +51,7 @@
         "0x56F6": {
             "group": "swap_hands",
             "key": "QK_SWAP_HANDS_ONE_SHOT",
+            "label": "Swap Hands One Shot",
             "aliases": [
                 "SH_OS"
             ]

data/constants/keycodes/keycodes_0.0.2_user.hjson

@@ -2,131 +2,163 @@
     "keycodes": {
         "0x7E40": {
             "group": "user",
-            "key": "QK_USER_0"
+            "key": "QK_USER_0",
+            "label": "User 0"
         },
         "0x7E41": {
             "group": "user",
-            "key": "QK_USER_1"
+            "key": "QK_USER_1",
+            "label": "User 1"
         },
         "0x7E42": {
             "group": "user",
-            "key": "QK_USER_2"
+            "key": "QK_USER_2",
+            "label": "User 2"
         },
         "0x7E43": {
             "group": "user",
-            "key": "QK_USER_3"
+            "key": "QK_USER_3",
+            "label": "User 3"
         },
         "0x7E44": {
             "group": "user",
-            "key": "QK_USER_4"
+            "key": "QK_USER_4",
+            "label": "User 4"
         },
         "0x7E45": {
             "group": "user",
-            "key": "QK_USER_5"
+            "key": "QK_USER_5",
+            "label": "User 5"
         },
         "0x7E46": {
             "group": "user",
-            "key": "QK_USER_6"
+            "key": "QK_USER_6",
+            "label": "User 6"
         },
         "0x7E47": {
             "group": "user",
-            "key": "QK_USER_7"
+            "key": "QK_USER_7",
+            "label": "User 7"
         },
         "0x7E48": {
             "group": "user",
-            "key": "QK_USER_8"
+            "key": "QK_USER_8",
+            "label": "User 8"
         },
         "0x7E49": {
             "group": "user",
-            "key": "QK_USER_9"
+            "key": "QK_USER_9",
+            "label": "User 9"
         },
         "0x7E4A": {
             "group": "user",
-            "key": "QK_USER_10"
+            "key": "QK_USER_10",
+            "label": "User 10"
         },
         "0x7E4B": {
             "group": "user",
-            "key": "QK_USER_11"
+            "key": "QK_USER_11",
+            "label": "User 11"
         },
         "0x7E4C": {
             "group": "user",
-            "key": "QK_USER_12"
+            "key": "QK_USER_12",
+            "label": "User 12"
         },
         "0x7E4D": {
             "group": "user",
-            "key": "QK_USER_13"
+            "key": "QK_USER_13",
+            "label": "User 13"
         },
         "0x7E4E": {
             "group": "user",
-            "key": "QK_USER_14"
+            "key": "QK_USER_14",
+            "label": "User 14"
         },
         "0x7E4F": {
             "group": "user",
-            "key": "QK_USER_15"
+            "key": "QK_USER_15",
+            "label": "User 15"
         },
         "0x7E50": {
             "group": "user",
-            "key": "QK_USER_16"
+            "key": "QK_USER_16",
+            "label": "User 16"
         },
         "0x7E51": {
             "group": "user",
-            "key": "QK_USER_17"
+            "key": "QK_USER_17",
+            "label": "User 17"
         },
          "0x7E52": {
             "group": "user",
-            "key": "QK_USER_18"
+            "key": "QK_USER_18",
+            "label": "User 18"
         },
         "0x7E53": {
             "group": "user",
-            "key": "QK_USER_19"
+            "key": "QK_USER_19",
+            "label": "User 19"
         },
         "0x7E54": {
             "group": "user",
-            "key": "QK_USER_20"
+            "key": "QK_USER_20",
+            "label": "User 20"
         },
         "0x7E55": {
             "group": "user",
-            "key": "QK_USER_21"
+            "key": "QK_USER_21",
+            "label": "User 21"
         },
         "0x7E56": {
             "group": "user",
-            "key": "QK_USER_22"
+            "key": "QK_USER_22",
+            "label": "User 22"
         },
         "0x7E57": {
             "group": "user",
-            "key": "QK_USER_23"
+            "key": "QK_USER_23",
+            "label": "User 23"
         },
         "0x7E58": {
             "group": "user",
-            "key": "QK_USER_24"
+            "key": "QK_USER_24",
+            "label": "User 24"
         },
         "0x7E59": {
             "group": "user",
-            "key": "QK_USER_25"
+            "key": "QK_USER_25",
+            "label": "User 25"
         },
         "0x7E5A": {
             "group": "user",
-            "key": "QK_USER_26"
+            "key": "QK_USER_26",
+            "label": "User 26"
         },
         "0x7E5B": {
             "group": "user",
-            "key": "QK_USER_27"
+            "key": "QK_USER_27",
+            "label": "User 27"
         },
         "0x7E5C": {
             "group": "user",
-            "key": "QK_USER_28"
+            "key": "QK_USER_28",
+            "label": "User 28"
         },
         "0x7E5D": {
             "group": "user",
-            "key": "QK_USER_29"
+            "key": "QK_USER_29",
+            "label": "User 29"
         },
         "0x7E5E": {
             "group": "user",
-            "key": "QK_USER_30"
+            "key": "QK_USER_30",
+            "label": "User 30"
         },
         "0x7E5F": {
             "group": "user",
-            "key": "QK_USER_31"
+            "key": "QK_USER_31",
+            "label": "User 31"
         }
     }
 }

data/constants/keycodes/keycodes_0.0.3_quantum.hjson

@@ -3,6 +3,7 @@
        "0x7C79": {
             "group": "quantum",
             "key": "QK_REPEAT_KEY",
+            "label": "Repeat",
             "aliases": [
                 "QK_REP"
             ]
@@ -10,6 +11,7 @@
         "0x7C7A": {
             "group": "quantum",
             "key": "QK_ALT_REPEAT_KEY",
+            "label": "Repeat Alternate",
             "aliases": [
                 "QK_AREP"
             ]

data/constants/keycodes/keycodes_0.0.4_lighting.hjson

@@ -3,6 +3,7 @@
         "0x7810": {
             "group": "led_matrix",
             "key": "QK_LED_MATRIX_ON",
+            "label": "LED Matrix On",
             "aliases": [
                 "LM_ON"
             ]
@@ -10,6 +11,7 @@
         "0x7811": {
             "group": "led_matrix",
             "key": "QK_LED_MATRIX_OFF",
+            "label": "LED Matrix Off",
             "aliases": [
                 "LM_OFF"
             ]
@@ -17,6 +19,7 @@
         "0x7812": {
             "group": "led_matrix",
             "key": "QK_LED_MATRIX_TOGGLE",
+            "label": "Toggle LED Matrix",
             "aliases": [
                 "LM_TOGG"
             ]
@@ -24,6 +27,7 @@
         "0x7813": {
             "group": "led_matrix",
             "key": "QK_LED_MATRIX_MODE_NEXT",
+            "label": "LED Matrix Next",
             "aliases": [
                 "LM_NEXT"
             ]
@@ -31,6 +35,7 @@
         "0x7814": {
             "group": "led_matrix",
             "key": "QK_LED_MATRIX_MODE_PREVIOUS",
+            "label": "LED Matrix Previous",
             "aliases": [
                 "LM_PREV"
             ]
@@ -38,6 +43,7 @@
         "0x7815": {
             "group": "led_matrix",
             "key": "QK_LED_MATRIX_BRIGHTNESS_UP",
+            "label": "LED Matrix Brightness Up",
             "aliases": [
                 "LM_BRIU"
             ]
@@ -45,6 +51,7 @@
         "0x7816": {
             "group": "led_matrix",
             "key": "QK_LED_MATRIX_BRIGHTNESS_DOWN",
+            "label": "LED Matrix Brightness Down",
             "aliases": [
                 "LM_BRID"
             ]
@@ -52,6 +59,7 @@
         "0x7817": {
             "group": "led_matrix",
             "key": "QK_LED_MATRIX_SPEED_UP",
+            "label": "LED Matrix Speed Up",
             "aliases": [
                 "LM_SPDU"
             ]
@@ -59,6 +67,7 @@
         "0x7818": {
             "group": "led_matrix",
             "key": "QK_LED_MATRIX_SPEED_DOWN",
+            "label": "LED Matrix Speed Down",
             "aliases": [
                 "LM_SPDD"
             ]
@@ -67,6 +76,7 @@
         "0x7820": {
             "group": "underglow",
             "key": "QK_UNDERGLOW_TOGGLE",
+            "label": "Toggle RGB Underglow",
             "aliases": [
                 "UG_TOGG"
             ]
@@ -74,6 +84,7 @@
         "0x7821": {
             "group": "underglow",
             "key": "QK_UNDERGLOW_MODE_NEXT",
+            "label": "RGB Underglow Next",
             "aliases": [
                 "!reset!",
                 "UG_NEXT"
@@ -82,6 +93,7 @@
         "0x7822": {
             "group": "underglow",
             "key": "QK_UNDERGLOW_MODE_PREVIOUS",
+            "label": "RGB Underglow Previous",
             "aliases": [
                 "!reset!",
                 "UG_PREV"
@@ -90,6 +102,7 @@
         "0x7823": {
             "group": "underglow",
             "key": "QK_UNDERGLOW_HUE_UP",
+            "label": "RGB Underglow Hue Up",
             "aliases": [
                 "UG_HUEU"
             ]
@@ -97,6 +110,7 @@
         "0x7824": {
             "group": "underglow",
             "key": "QK_UNDERGLOW_HUE_DOWN",
+            "label": "RGB Underglow Hue Down",
             "aliases": [
                 "UG_HUED"
             ]
@@ -104,6 +118,7 @@
         "0x7825": {
             "group": "underglow",
             "key": "QK_UNDERGLOW_SATURATION_UP",
+            "label": "RGB Underglow Saturation Up",
             "aliases": [
                 "UG_SATU"
             ]
@@ -111,6 +126,7 @@
         "0x7826": {
             "group": "underglow",
             "key": "QK_UNDERGLOW_SATURATION_DOWN",
+            "label": "RGB Underglow Saturation Down",
             "aliases": [
                 "UG_SATD"
             ]
@@ -118,6 +134,7 @@
         "0x7827": {
             "group": "underglow",
             "key": "QK_UNDERGLOW_VALUE_UP",
+            "label": "RGB Underglow Value Up",
             "aliases": [
                 "UG_VALU"
             ]
@@ -125,6 +142,7 @@
         "0x7828": {
             "group": "underglow",
             "key": "QK_UNDERGLOW_VALUE_DOWN",
+            "label": "RGB Underglow Value Down",
             "aliases": [
                 "UG_VALD"
             ]
@@ -132,6 +150,7 @@
         "0x7829": {
             "group": "underglow",
             "key": "QK_UNDERGLOW_SPEED_UP",
+            "label": "RGB Underglow Speed Up",
             "aliases": [
                 "UG_SPDU"
             ]
@@ -139,6 +158,7 @@
         "0x782A": {
             "group": "underglow",
             "key": "QK_UNDERGLOW_SPEED_DOWN",
+            "label": "RGB Underglow Speed Down",
             "aliases": [
                 "UG_SPDD"
             ]
@@ -147,6 +167,7 @@
         "0x7840": {
             "group": "rgb_matrix",
             "key": "QK_RGB_MATRIX_ON",
+            "label": "RGB Matrix On",
             "aliases": [
                 "RM_ON"
             ]
@@ -154,6 +175,7 @@
         "0x7841": {
             "group": "rgb_matrix",
             "key": "QK_RGB_MATRIX_OFF",
+            "label": "RGB Matrix Off"
             "aliases": [
                 "RM_OFF"
             ]
@@ -161,6 +183,7 @@
         "0x7842": {
             "group": "rgb_matrix",
             "key": "QK_RGB_MATRIX_TOGGLE",
+            "label": "Toggle RGB Matrix",
             "aliases": [
                 "RM_TOGG"
             ]
@@ -168,6 +191,7 @@
         "0x7843": {
             "group": "rgb_matrix",
             "key": "QK_RGB_MATRIX_MODE_NEXT",
+            "label": "RGB Matrix Next",
             "aliases": [
                 "RM_NEXT"
             ]
@@ -175,6 +199,7 @@
         "0x7844": {
             "group": "rgb_matrix",
             "key": "QK_RGB_MATRIX_MODE_PREVIOUS",
+            "label": "RGB Matrix Previous",
             "aliases": [
                 "RM_PREV"
             ]
@@ -182,6 +207,7 @@
         "0x7845": {
             "group": "rgb_matrix",
             "key": "QK_RGB_MATRIX_HUE_UP",
+            "label": "RGB Matrix Hue Up",
             "aliases": [
                 "RM_HUEU"
             ]
@@ -189,6 +215,7 @@
         "0x7846": {
             "group": "rgb_matrix",
             "key": "QK_RGB_MATRIX_HUE_DOWN",
+            "label": "RGB Matrix Hue Down",
             "aliases": [
                 "RM_HUED"
             ]
@@ -196,6 +223,7 @@
         "0x7847": {
             "group": "rgb_matrix",
             "key": "QK_RGB_MATRIX_SATURATION_UP",
+            "label": "RGB Matrix Saturation Up",
             "aliases": [
                 "RM_SATU"
             ]
@@ -203,6 +231,7 @@
         "0x7848": {
             "group": "rgb_matrix",
             "key": "QK_RGB_MATRIX_SATURATION_DOWN",
+            "label": "RGB Matrix Saturation Down",
             "aliases": [
                 "RM_SATD"
             ]
@@ -210,6 +239,7 @@
         "0x7849": {
             "group": "rgb_matrix",
             "key": "QK_RGB_MATRIX_VALUE_UP",
+            "label": "RGB Matrix Value Up",
             "aliases": [
                 "RM_VALU"
             ]
@@ -217,6 +247,7 @@
         "0x784A": {
             "group": "rgb_matrix",
             "key": "QK_RGB_MATRIX_VALUE_DOWN",
+            "label": "RGB Matrix Value Down",
             "aliases": [
                 "RM_VALD"
             ]
@@ -224,6 +255,7 @@
         "0x784B": {
             "group": "rgb_matrix",
             "key": "QK_RGB_MATRIX_SPEED_UP",
+            "label": "RGB Matrix Speed Up",
             "aliases": [
                 "RM_SPDU"
             ]
@@ -231,6 +263,7 @@
         "0x784C": {
             "group": "rgb_matrix",
             "key": "QK_RGB_MATRIX_SPEED_DOWN",
+            "label": "RGB Matrix Speed Down",
             "aliases": [
                 "RM_SPDD"
             ]

data/constants/keycodes/keycodes_0.0.5_basic.hjson

@@ -3,7 +3,7 @@
         "0x00CD": {
             "group": "mouse",
             "key": "QK_MOUSE_CURSOR_UP",
-            "label": "Mouse cursor up",
+            "label": "Mouse Up",
             "aliases": [
                 "!reset!",
                 "MS_UP"
@@ -12,7 +12,7 @@
         "0x00CE": {
             "group": "mouse",
             "key": "QK_MOUSE_CURSOR_DOWN",
-            "label": "Mouse cursor down",
+            "label": "Mouse Down",
             "aliases": [
                 "!reset!",
                 "MS_DOWN"
@@ -21,7 +21,7 @@
         "0x00CF": {
             "group": "mouse",
             "key": "QK_MOUSE_CURSOR_LEFT",
-            "label": "Mouse cursor left",
+            "label": "Mouse Left",
             "aliases": [
                 "!reset!",
                 "MS_LEFT"
@@ -30,7 +30,7 @@
         "0x00D0": {
             "group": "mouse",
             "key": "QK_MOUSE_CURSOR_RIGHT",
-            "label": "Mouse cursor right",
+            "label": "Mouse Right",
             "aliases": [
                 "!reset!",
                 "MS_RGHT"
@@ -39,7 +39,7 @@
         "0x00D1": {
             "group": "mouse",
             "key": "QK_MOUSE_BUTTON_1",
-            "label": "Mouse button 1",
+            "label": "Mouse Button 1",
             "aliases": [
                 "!reset!",
                 "MS_BTN1"
@@ -48,7 +48,7 @@
         "0x00D2": {
             "group": "mouse",
             "key": "QK_MOUSE_BUTTON_2",
-            "label": "Mouse button 2",
+            "label": "Mouse Button 2",
             "aliases": [
                 "!reset!",
                 "MS_BTN2"
@@ -57,7 +57,7 @@
         "0x00D3": {
             "group": "mouse",
             "key": "QK_MOUSE_BUTTON_3",
-            "label": "Mouse button 3",
+            "label": "Mouse Button 3",
             "aliases": [
                 "!reset!",
                 "MS_BTN3"
@@ -66,7 +66,7 @@
         "0x00D4": {
             "group": "mouse",
             "key": "QK_MOUSE_BUTTON_4",
-            "label": "Mouse button 4",
+            "label": "Mouse Button 4",
             "aliases": [
                 "!reset!",
                 "MS_BTN4"
@@ -75,7 +75,7 @@
         "0x00D5": {
             "group": "mouse",
             "key": "QK_MOUSE_BUTTON_5",
-            "label": "Mouse button 5",
+            "label": "Mouse Button 5",
             "aliases": [
                 "!reset!",
                 "MS_BTN5"
@@ -84,7 +84,7 @@
         "0x00D6": {
             "group": "mouse",
             "key": "QK_MOUSE_BUTTON_6",
-            "label": "Mouse button 6",
+            "label": "Mouse Button 6",
             "aliases": [
                 "!reset!",
                 "MS_BTN6"
@@ -93,7 +93,7 @@
         "0x00D7": {
             "group": "mouse",
             "key": "QK_MOUSE_BUTTON_7",
-            "label": "Mouse button 7",
+            "label": "Mouse Button 7",
             "aliases": [
                 "!reset!",
                 "MS_BTN7"
@@ -102,7 +102,7 @@
         "0x00D8": {
             "group": "mouse",
             "key": "QK_MOUSE_BUTTON_8",
-            "label": "Mouse button 8",
+            "label": "Mouse Button 8",
             "aliases": [
                 "!reset!",
                 "MS_BTN8"
@@ -111,7 +111,7 @@
         "0x00D9": {
             "group": "mouse",
             "key": "QK_MOUSE_WHEEL_UP",
-            "label": "Mouse wheel up",
+            "label": "Mouse Wheel Up",
             "aliases": [
                 "!reset!",
                 "MS_WHLU"
@@ -120,7 +120,7 @@
         "0x00DA": {
             "group": "mouse",
             "key": "QK_MOUSE_WHEEL_DOWN",
-            "label": "Mouse wheel down",
+            "label": "Mouse Wheel Down",
             "aliases": [
                 "!reset!",
                 "MS_WHLD"
@@ -129,7 +129,7 @@
         "0x00DB": {
             "group": "mouse",
             "key": "QK_MOUSE_WHEEL_LEFT",
-            "label": "Mouse wheel left",
+            "label": "Mouse Wheel Left",
             "aliases": [
                 "!reset!",
                 "MS_WHLL"
@@ -138,7 +138,7 @@
         "0x00DC": {
             "group": "mouse",
             "key": "QK_MOUSE_WHEEL_RIGHT",
-            "label": "Mouse wheel right",
+            "label": "Mouse Wheel Right",
             "aliases": [
                 "!reset!",
                 "MS_WHLR"
@@ -147,7 +147,7 @@
         "0x00DD": {
             "group": "mouse",
             "key": "QK_MOUSE_ACCELERATION_0",
-            "label": "Set mouse acceleration to 0",
+            "label": "Acceleration 0",
             "aliases": [
                 "!reset!",
                 "MS_ACL0"
@@ -156,7 +156,7 @@
         "0x00DE": {
             "group": "mouse",
             "key": "QK_MOUSE_ACCELERATION_1",
-            "label": "Set mouse acceleration to 1",
+            "label": "Acceleration 1",
             "aliases": [
                 "!reset!",
                 "MS_ACL1"
@@ -165,7 +165,7 @@
         "0x00DF": {
             "group": "mouse",
             "key": "QK_MOUSE_ACCELERATION_2",
-            "label": "Set mouse acceleration to 2",
+            "label": "Acceleration 2",
             "aliases": [
                 "!reset!",
                 "MS_ACL2"

data/constants/keycodes/keycodes_0.0.6_connection.hjson

@@ -8,6 +8,7 @@
         "0x7780": {
             "group": "connection",
             "key": "QK_OUTPUT_AUTO",
+            "label": "Output Auto",
             "aliases": [
                 "OU_AUTO"
             ]
@@ -15,6 +16,7 @@
         "0x7781": {
             "group": "connection",
             "key": "QK_OUTPUT_NEXT",
+            "label": "Next Output",
             "aliases": [
                 "OU_NEXT"
             ]
@@ -22,6 +24,7 @@
         "0x7782": {
             "group": "connection",
             "key": "QK_OUTPUT_PREV",
+            "label": "Previous Output",
             "aliases": [
                 "OU_PREV"
             ]
@@ -29,6 +32,7 @@
         "0x7783": {
             "group": "connection",
             "key": "QK_OUTPUT_NONE",
+            "label": "None",
             "aliases": [
                 "OU_NONE"
             ]
@@ -36,6 +40,7 @@
         "0x7784": {
             "group": "connection",
             "key": "QK_OUTPUT_USB",
+            "label": "USB",
             "aliases": [
                 "OU_USB"
             ]
@@ -43,6 +48,7 @@
         "0x7785": {
             "group": "connection",
             "key": "QK_OUTPUT_2P4GHZ",
+            "label": "2.4GHz",
             "aliases": [
                 "OU_2P4G"
             ]
@@ -50,6 +56,7 @@
         "0x7786": {
             "group": "connection",
             "key": "QK_OUTPUT_BLUETOOTH",
+            "label": "Bluetooth",
             "aliases": [
                 "OU_BT"
             ]
@@ -58,6 +65,7 @@
         "0x7790": {
             "group": "connection",
             "key": "QK_BLUETOOTH_PROFILE_NEXT",
+            "label": "Bluetooth Profile Next",
             "aliases": [
                 "BT_NEXT"
             ]
@@ -65,6 +73,7 @@
         "0x7791": {
             "group": "connection",
             "key": "QK_BLUETOOTH_PROFILE_PREV",
+            "label": "Bluetooth Profile Previous",
             "aliases": [
                 "BT_PREV"
             ]
@@ -72,6 +81,7 @@
         "0x7792": {
             "group": "connection",
             "key": "QK_BLUETOOTH_UNPAIR",
+            "label": "Unpair",
             "aliases": [
                 "BT_UNPR"
             ]
@@ -79,6 +89,7 @@
         "0x7793": {
             "group": "connection",
             "key": "QK_BLUETOOTH_PROFILE1",
+            "label": "Bluetooth Profile 1",
             "aliases": [
                 "BT_PRF1"
             ]
@@ -86,6 +97,7 @@
         "0x7794": {
             "group": "connection",
             "key": "QK_BLUETOOTH_PROFILE2",
+            "label": "Bluetooth Profile 2",
             "aliases": [
                 "BT_PRF2"
             ]
@@ -93,6 +105,7 @@
         "0x7795": {
             "group": "connection",
             "key": "QK_BLUETOOTH_PROFILE3",
+            "label": "Bluetooth Profile 3",
             "aliases": [
                 "BT_PRF3"
             ]
@@ -100,6 +113,7 @@
         "0x7796": {
             "group": "connection",
             "key": "QK_BLUETOOTH_PROFILE4",
+            "label": "Bluetooth Profile 4",
             "aliases": [
                 "BT_PRF4"
             ]
@@ -107,6 +121,7 @@
         "0x7797": {
             "group": "connection",
             "key": "QK_BLUETOOTH_PROFILE5",
+            "label": "Bluetooth Profile 5",
             "aliases": [
                 "BT_PRF5"
             ]

data/constants/keycodes/keycodes_0.0.6_quantum.hjson

@@ -6,6 +6,7 @@
         "0x7C7B": {
             "group": "quantum",
             "key": "QK_LAYER_LOCK",
+            "label": "Layer Lock",
             "aliases": [
                 "QK_LLCK"
             ]

data/constants/keycodes/keycodes_0.0.8_lighting.hjson

@@ -0,0 +1,37 @@
+{
+    "keycodes": {
+        "0x7819": {
+            "group": "led_matrix",
+            "key": "QK_LED_MATRIX_FLAG_NEXT",
+            "label": "LED Matrix Flag Next",
+            "aliases": [
+                "LM_FLGN"
+            ]
+        },
+        "0x781A": {
+            "group": "led_matrix",
+            "key": "QK_LED_MATRIX_FLAG_PREVIOUS",
+            "label": "LED Matrix Flag Previous",
+            "aliases": [
+                "LM_FLGP"
+            ]
+        },
+
+        "0x784D": {
+            "group": "rgb_matrix",
+            "key": "QK_RGB_MATRIX_FLAG_NEXT",
+            "label": "RGB Matrix Flag Next",
+            "aliases": [
+                "RM_FLGN"
+            ]
+        },
+        "0x784E": {
+            "group": "rgb_matrix",
+            "key": "QK_RGB_MATRIX_FLAG_PREVIOUS",
+            "label": "RGB Matrix Flag Previous",
+            "aliases": [
+                "RM_FLGP"
+            ]
+        }
+    }
+}

data/constants/module_hooks/1.1.2.hjson

@@ -0,0 +1,3 @@
+{
+    // This version exists to signify addition of split data sync support.
+}

data/mappings/info_config.hjson

@@ -98,6 +98,7 @@
 
     // LED Matrix
     "LED_MATRIX_CENTER": {"info_key": "led_matrix.center_point", "value_type": "array.int"},
+    "LED_MATRIX_FLAG_STEPS": {"info_key": "led_matrix.flag_steps", "value_type": "array.int"},
     "LED_MATRIX_KEYRELEASES": {"info_key": "led_matrix.react_on_keyup", "value_type": "flag"},
     "LED_MATRIX_LED_FLUSH_LIMIT": {"info_key": "led_matrix.led_flush_limit", "value_type": "int"},
     "LED_MATRIX_LED_PROCESS_LIMIT": {"info_key": "led_matrix.led_process_limit", "value_type": "int", "to_json": false},
@@ -111,6 +112,7 @@
     "LED_MATRIX_DEFAULT_ON": {"info_key": "led_matrix.default.on", "value_type": "bool"},
     "LED_MATRIX_DEFAULT_VAL": {"info_key": "led_matrix.default.val", "value_type": "int"},
     "LED_MATRIX_DEFAULT_SPD": {"info_key": "led_matrix.default.speed", "value_type": "int"},
+    "LED_MATRIX_DEFAULT_FLAGS": {"info_key": "led_matrix.default.flags", "value_type": "int"},
 
     // Locking Switch
     "LOCKING_SUPPORT_ENABLE": {"info_key": "qmk.locking.enabled", "value_type": "flag"},
@@ -147,6 +149,7 @@
 
     // RGB Matrix
     "RGB_MATRIX_CENTER": {"info_key": "rgb_matrix.center_point", "value_type": "array.int"},
+    "RGB_MATRIX_FLAG_STEPS": {"info_key": "rgb_matrix.flag_steps", "value_type": "array.int"},
     "RGB_MATRIX_HUE_STEP": {"info_key": "rgb_matrix.hue_steps", "value_type": "int"},
     "RGB_MATRIX_KEYRELEASES": {"info_key": "rgb_matrix.react_on_keyup", "value_type": "flag"},
     "RGB_MATRIX_LED_FLUSH_LIMIT": {"info_key": "rgb_matrix.led_flush_limit", "value_type": "int"},
@@ -164,6 +167,7 @@
     "RGB_MATRIX_DEFAULT_SAT": {"info_key": "rgb_matrix.default.sat", "value_type": "int"},
     "RGB_MATRIX_DEFAULT_VAL": {"info_key": "rgb_matrix.default.val", "value_type": "int"},
     "RGB_MATRIX_DEFAULT_SPD": {"info_key": "rgb_matrix.default.speed", "value_type": "int"},
+    "RGB_MATRIX_DEFAULT_FLAGS": {"info_key": "rgb_matrix.default.flags", "value_type": "int"},
 
     // RGBLight
     "RGBLED_SPLIT": {"info_key": "rgblight.split_count", "value_type": "array.int"},
@@ -192,7 +196,7 @@
 
     // Split Keyboard
     "SOFT_SERIAL_PIN": {"info_key": "split.serial.pin"},
-    "SELECT_SOFT_SERIAL_SPEED": {"info_key": "split.serial.speed"},
+    "SELECT_SOFT_SERIAL_SPEED": {"info_key": "split.serial.speed", "value_type": "int"},
     "SPLIT_HAND_MATRIX_GRID": {"info_key": "split.handedness.matrix_grid", "value_type": "array", "to_c": false},
     "SPLIT_HAND_PIN": {"info_key": "split.handedness.pin"},
     "SPLIT_USB_DETECT": {"info_key": "split.usb_detect.enabled", "value_type": "flag"},
@@ -220,6 +224,7 @@
     "PERMISSIVE_HOLD_PER_KEY": {"info_key": "tapping.permissive_hold_per_key", "value_type": "flag"},
     "RETRO_TAPPING": {"info_key": "tapping.retro", "value_type": "flag"},
     "RETRO_TAPPING_PER_KEY": {"info_key": "tapping.retro_per_key", "value_type": "flag"},
+    "SPECULATIVE_HOLD": {"info_key": "tapping.speculative_hold", "value_type": "flag"},
     "TAP_CODE_DELAY": {"info_key": "qmk.tap_keycode_delay", "value_type": "int"},
     "TAP_HOLD_CAPS_DELAY": {"info_key": "qmk.tap_capslock_delay", "value_type": "int"},
     "TAPPING_TERM": {"info_key": "tapping.term", "value_type": "int"},

data/mappings/info_defaults.hjson

@@ -11,6 +11,9 @@
         "on_state": 1
     },
     "debounce": 5,
+    "dynamic_keymap": {
+        "layer_count": 4
+    },
     "features": {
         "command": false,
         "console": false
@@ -23,7 +26,8 @@
             "animation": "solid",
             "on": true,
             "val": 255,
-            "speed": 128
+            "speed": 128,
+            "flags": 255
         },
         "led_flush_limit": 16,
         "max_brightness": 255,
@@ -53,7 +57,8 @@
             "hue": 0,
             "sat": 255,
             "val": 255,
-            "speed": 128
+            "speed": 128,
+            "flags": 255
         },
         "hue_steps": 8,
         "led_flush_limit": 16,

data/mappings/keyboard_aliases.hjson

@@ -1620,8 +1620,11 @@
     "0_sixty": {
         "target": "0_sixty/base"
     },
-    "0xcb/splaytoraid": {
-        "target": "0xcb/splaytoraid/rp2040_ce"
+    "0xcb/splaytoraid/32u4": {
+        "target": "0xcb/splaytoraid"
+    },
+    "0xcb/splaytoraid/rp2040_ce": {
+        "target": "0xcb/splaytoraid"
     },
     "1upkeyboards/pi40": {
         "target": "1upkeyboards/pi40/mit_v1_0"
@@ -1632,12 +1635,24 @@
     "1upkeyboards/sweet16": {
         "target": "1upkeyboards/sweet16/v1"
     },
+    "1upkeyboards/sweet16v2/kb2040": {
+        "target": "1upkeyboards/sweet16v2"
+    },
+    "1upkeyboards/sweet16v2/pro_micro": {
+        "target": "1upkeyboards/sweet16v2"
+    },
     "25keys/aleth42": {
         "target": "25keys/aleth42/rev1"
     },
     "25keys/zinc": {
         "target": "25keys/zinc/rev1"
     },
+    "40percentclub/gherkin/kb2040": {
+        "target": "40percentclub/gherkin"
+    },
+    "40percentclub/gherkin/pro_micro": {
+        "target": "40percentclub/gherkin"
+    },
     "40percentclub/i75": {
         "target": "40percentclub/i75/promicro"
     },
@@ -1735,7 +1750,7 @@
         "target": "durgod/dgk6x/galaxy"
     },
     "durgod/venus": {
-        "target": "durgod/dgk6x/venus"
+        "target": "durgod/dgk6x/venus_ansi"
     },
     "dztech/tofu/ii": {
         "target": "dztech/tofu/ii/v1"

data/schemas/keyboard.jsonschema

@@ -333,6 +333,17 @@
                 }
             }
         },
+        "dynamic_keymap": {
+            "type": "object",
+            "properties": {
+                "eeprom_max_addr": {"$ref": "./definitions.jsonschema#/unsigned_int"},
+                "layer_count": {
+                    "type": "integer",
+                    "minimum": 1,
+                    "maximum": 32
+                }
+            }
+        },
         "eeprom": {
             "properties": {
                 "driver": {"type": "string"},
@@ -543,7 +554,8 @@
                         "on": {"type": "boolean"},
                         "animation": {"type": "string"},
                         "val": {"$ref": "./definitions.jsonschema#/unsigned_int_8"},
-                        "speed": {"$ref": "./definitions.jsonschema#/unsigned_int_8"}
+                        "speed": {"$ref": "./definitions.jsonschema#/unsigned_int_8"},
+                        "flags": {"$ref": "./definitions.jsonschema#/unsigned_int_8"}
                     }
                 },
                 "driver": {
@@ -571,6 +583,11 @@
                     "maxItems": 2,
                     "items": {"$ref": "./definitions.jsonschema#/unsigned_int_8"}
                 },
+                "flag_steps": {
+                    "type": "array",
+                    "minItems": 1,
+                    "items": {"$ref": "./definitions.jsonschema#/unsigned_int_8"}
+                },
                 "max_brightness": {"$ref": "./definitions.jsonschema#/unsigned_int_8"},
                 "timeout": {"$ref": "./definitions.jsonschema#/unsigned_int"},
                 "val_steps": {"$ref": "./definitions.jsonschema#/unsigned_int"},
@@ -626,7 +643,8 @@
                         "hue": {"$ref": "./definitions.jsonschema#/unsigned_int_8"},
                         "sat": {"$ref": "./definitions.jsonschema#/unsigned_int_8"},
                         "val": {"$ref": "./definitions.jsonschema#/unsigned_int_8"},
-                        "speed": {"$ref": "./definitions.jsonschema#/unsigned_int_8"}
+                        "speed": {"$ref": "./definitions.jsonschema#/unsigned_int_8"},
+                        "flags": {"$ref": "./definitions.jsonschema#/unsigned_int_8"}
                     }
                 },
                 "driver": {
@@ -656,6 +674,11 @@
                     "maxItems": 2,
                     "items": {"$ref": "./definitions.jsonschema#/unsigned_int_8"}
                 },
+                "flag_steps": {
+                    "type": "array",
+                    "minItems": 1,
+                    "items": {"$ref": "./definitions.jsonschema#/unsigned_int_8"}
+                },
                 "max_brightness": {"$ref": "./definitions.jsonschema#/unsigned_int_8"},
                 "timeout": {"$ref": "./definitions.jsonschema#/unsigned_int"},
                 "hue_steps": {"$ref": "./definitions.jsonschema#/unsigned_int"},

data/schemas/keymap.jsonschema

@@ -35,6 +35,17 @@
                 }
             }
         },
+        "dip_switches": {
+            "type": "array",
+            "items": {
+                "type": "object",
+                "required": ["on", "off"],
+                "properties": {
+                    "on": {"type": "string"},
+                    "off": {"type": "string"}
+                }
+            }
+        },
         "macros": {
             "type": "array",
             "items": {

docs/ChangeLog/20251130.md

@@ -0,0 +1,190 @@
+# QMK Breaking Changes - 2025 Nov 30 Changelog
+
+## Notable Features {#notable-features}
+
+### Speculative Hold option for mod-taps: hold mods instantly while unsettled [#25572](https://github.com/qmk/qmk_firmware/pull/25572)
+
+Speculative Hold makes mod-tap keys more responsive by applying the modifier instantly on keydown, before the tap-hold decision is made. This is especially useful for actions like Shift+click and Ctrl+scroll wheel with an external mouse, which can feel laggy with standard mod-taps.
+
+The firmware holds the modifier speculatively. Once the key's behavior is settled:
+
+* If held, the modifier remains active as expected until the key is released.
+* If tapped, the speculative modifier is canceled just before the tapping keycode is sent.
+
+Speculative Hold applies the modifier early but does not change the underlying tap-hold decision logic. Speculative Hold is compatible to use in combination with any other tap-hold options.
+
+see the [Speculative Hold](../tap_hold#speculative-hold) documentation for more information.
+
+## Changes Requiring User Action
+
+### Updated Keyboard Codebases
+
+| Old Keyboard Name                | New Keyboard Name       |
+|----------------------------------|-------------------------|
+| 0xcb/splaytoraid/32u4            | 0xcb/splaytoraid        |
+| 0xcb/splaytoraid/rp2040_ce       | 0xcb/splaytoraid        |
+| 1upkeyboards/sweet16v2/kb2040    | 1upkeyboards/sweet16v2  |
+| 1upkeyboards/sweet16v2/pro_micro | 1upkeyboards/sweet16v2  |
+| 40percentclub/gherkin/kb2040     | 40percentclub/gherkin   |
+| 40percentclub/gherkin/pro_micro  | 40percentclub/gherkin   |
+| durgod/dgk6x/venus               | durgod/dgk6x/venus_ansi |
+
+### Reduce tap dance memory usage, move state out of data [#25415](https://github.com/qmk/qmk_firmware/pull/25415)
+
+The tap dance state has been separated from the action structure. Custom tap dance functions now receive the state as a separate parameter instead of accessing it through `action->state`.
+
+If your keymap uses custom tap dance functions that access the tap dance state, you need to update your code.
+
+* You can't use `action->state`. Instead you need to call `tap_dance_state_t *tap_dance_get_state(uint8_t tap_dance_idx)` to get the state.
+* You now get a pointer to the state, so use `->` notation rather than `.` notation to get fields from it.
+
+### Before:
+```c
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+    tap_dance_action_t *action;
+
+    switch (keycode) {
+        case TD(CT_CLN):
+            action = tap_dance_get(QK_TAP_DANCE_GET_INDEX(keycode));
+            if (!record->event.pressed && action->state.count && !action->state.finished) {
+                tap_dance_tap_hold_t *tap_hold = (tap_dance_tap_hold_t *)action->user_data;
+                tap_code16(tap_hold->tap);
+            }
+
+    }
+    return true;
+}
+```
+### After:
+```c
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+    tap_dance_action_t *action;
+    tap_dance_state_t* state;
+    switch (keycode) {
+        case TD(CT_CLN):
+            action = tap_dance_get(QK_TAP_DANCE_GET_INDEX(keycode));
+            state = tap_dance_get_state(QK_TAP_DANCE_GET_INDEX(keycode));
+            if (!record->event.pressed && state != NULL && state->count && !state->finished) {
+                tap_dance_tap_hold_t *tap_hold = (tap_dance_tap_hold_t *)action->user_data;
+                tap_code16(tap_hold->tap);
+            }
+    }
+    return true;
+}
+```
+
+## Deprecation Notices
+
+In line with the [notice period](../support_deprecation_policy#how-much-advance-notice-will-be-given), deprecation notices for larger items are listed here.
+
+### Remove override of QK_{LED,RGB}_MATRIX_TOGGLE keycode [#25672](https://github.com/qmk/qmk_firmware/pull/25672)
+
+[#24649](https://github.com/qmk/qmk_firmware/pull/24649) implemented genetic behavior, including keycodes, to cycle flags.
+
+Any overriding of existing keycodes that duplicate this behavior will be removed to ensure consistency with core functionality.
+
+## Full changelist
+
+Core:
+* suspend: suppress wake up keypress ([#23389](https://github.com/qmk/qmk_firmware/pull/23389))
+* [Feature Improvement]add option to keep layer state when recording dynamic macros ([#24418](https://github.com/qmk/qmk_firmware/pull/24418))
+* Add generic handling to cycle LED/RGB Matrix flags ([#24649](https://github.com/qmk/qmk_firmware/pull/24649))
+* Implement `mod_t` packed struct ([#25168](https://github.com/qmk/qmk_firmware/pull/25168))
+* Implement minimal connection update logic ([#25334](https://github.com/qmk/qmk_firmware/pull/25334))
+* Reduce tap dance memory usage, move state out of data ([#25415](https://github.com/qmk/qmk_firmware/pull/25415))
+* Refactor debounce algorithm with static allocation ([#25515](https://github.com/qmk/qmk_firmware/pull/25515))
+* Restructure Pixel Rain interval code ([#25516](https://github.com/qmk/qmk_firmware/pull/25516))
+* Guard remapping logic with MAGIC_ENABLE ([#25537](https://github.com/qmk/qmk_firmware/pull/25537))
+* Update default OLED font ([#25565](https://github.com/qmk/qmk_firmware/pull/25565))
+* Speculative Hold option for mod-taps: hold mods instantly while unsettled. ([#25572](https://github.com/qmk/qmk_firmware/pull/25572))
+* Simplify hue calculation in raindrops animation ([#25587](https://github.com/qmk/qmk_firmware/pull/25587))
+* Simplify tap_code16_delay ([#25595](https://github.com/qmk/qmk_firmware/pull/25595))
+* Debounce: Deprecate num_rows parameter ([#25632](https://github.com/qmk/qmk_firmware/pull/25632))
+* Add I2C Transmit and Receive function ([#25637](https://github.com/qmk/qmk_firmware/pull/25637))
+* [QP] Minor cleanup and support for RGB888 surface ([#25706](https://github.com/qmk/qmk_firmware/pull/25706))
+* Restrict mouse timer activation to movement keycodes ([#25716](https://github.com/qmk/qmk_firmware/pull/25716))
+* Update STM32F446 default HSE to 8MHz ([#25717](https://github.com/qmk/qmk_firmware/pull/25717))
+* making flowtap timer public so it can be used easily with combos ([#25731](https://github.com/qmk/qmk_firmware/pull/25731))
+* Add PixArt PAW-3222 mouse sensor driver ([#25763](https://github.com/qmk/qmk_firmware/pull/25763))
+* Merge upstream uf2conv changes ([#25786](https://github.com/qmk/qmk_firmware/pull/25786))
+* Partially skip generating community modules when none enabled ([#25819](https://github.com/qmk/qmk_firmware/pull/25819))
+
+CLI:
+* Generate default encoder resolution for sparse config ([#25247](https://github.com/qmk/qmk_firmware/pull/25247))
+* Add DIP Switch map support to keymap.json ([#25431](https://github.com/qmk/qmk_firmware/pull/25431))
+* Add return code to `qmk userspace-doctor` ([#25775](https://github.com/qmk/qmk_firmware/pull/25775))
+* Better defaulting of `{RGB,LED}_MATRIX_DEFAULT_FLAGS` ([#25785](https://github.com/qmk/qmk_firmware/pull/25785))
+* add BCD versions of QMK Version ([#25804](https://github.com/qmk/qmk_firmware/pull/25804))
+* Lint error on missing keyboard readme ([#25814](https://github.com/qmk/qmk_firmware/pull/25814))
+
+Submodule updates:
+* Update ChibiOS-Contrib. ([#25751](https://github.com/qmk/qmk_firmware/pull/25751))
+
+Keyboards:
+* `atreus`: restore intended matrix implementations ([#24082](https://github.com/qmk/qmk_firmware/pull/24082))
+* add SteelSeries prime, a stripped down prime+ ([#24719](https://github.com/qmk/qmk_firmware/pull/24719))
+* Add new macropad Sharkropad ([#24961](https://github.com/qmk/qmk_firmware/pull/24961))
+* Addition of the D60B tsangan pcb ([#25245](https://github.com/qmk/qmk_firmware/pull/25245))
+* Migrate `eeconfig_init_kb` implementations to config ([#25422](https://github.com/qmk/qmk_firmware/pull/25422))
+* Generate `CUSTOM_MATRIX = lite` without `matrix_pins.custom` ([#25453](https://github.com/qmk/qmk_firmware/pull/25453))
+* Add classic48 keyboard ([#25492](https://github.com/qmk/qmk_firmware/pull/25492))
+* add durgod venus iso support ([#25526](https://github.com/qmk/qmk_firmware/pull/25526))
+* Migrate `g_led_config` to DD (0-9, A) ([#25558](https://github.com/qmk/qmk_firmware/pull/25558))
+* Migrate `g_led_config` to DD (B, C) ([#25559](https://github.com/qmk/qmk_firmware/pull/25559))
+* Migrate `g_led_config` to DD (D) ([#25560](https://github.com/qmk/qmk_firmware/pull/25560))
+* Migrate `g_led_config` to DD (E, F) ([#25561](https://github.com/qmk/qmk_firmware/pull/25561))
+* Remove duplication of RP2040 config defaults ([#25563](https://github.com/qmk/qmk_firmware/pull/25563))
+* Refactor 40percentclub/ut47 ([#25571](https://github.com/qmk/qmk_firmware/pull/25571))
+* E7-V2 Implementation ([#25594](https://github.com/qmk/qmk_firmware/pull/25594))
+* Migrate `g_led_config` to DD (G) ([#25598](https://github.com/qmk/qmk_firmware/pull/25598))
+* Migrate `g_led_config` to DD (H) ([#25599](https://github.com/qmk/qmk_firmware/pull/25599))
+* Migrate `g_led_config` to DD (I) ([#25600](https://github.com/qmk/qmk_firmware/pull/25600))
+* Migrate `g_led_config` to DD (JK1) ([#25601](https://github.com/qmk/qmk_firmware/pull/25601))
+* Migrate `g_led_config` to DD (K2) ([#25602](https://github.com/qmk/qmk_firmware/pull/25602))
+* Migrate `g_led_config` to DD (K3) ([#25603](https://github.com/qmk/qmk_firmware/pull/25603))
+* Migrate `g_led_config` to DD (K4) ([#25605](https://github.com/qmk/qmk_firmware/pull/25605))
+* Migrate `g_led_config` to DD (K5) ([#25606](https://github.com/qmk/qmk_firmware/pull/25606))
+* Migrate `g_led_config` to DD (K6) ([#25607](https://github.com/qmk/qmk_firmware/pull/25607))
+* Refactor `40percentclub/gherkin` ([#25608](https://github.com/qmk/qmk_firmware/pull/25608))
+* Refactor `0xcb/splaytoraid` ([#25609](https://github.com/qmk/qmk_firmware/pull/25609))
+* Refactor `1upkeyboards/sweet16v2` ([#25610](https://github.com/qmk/qmk_firmware/pull/25610))
+* Migrate `g_led_config` to DD (K7) ([#25616](https://github.com/qmk/qmk_firmware/pull/25616))
+* Migrate `g_led_config` to DD (L) ([#25617](https://github.com/qmk/qmk_firmware/pull/25617))
+* Migrate `g_led_config` to DD (M1) ([#25618](https://github.com/qmk/qmk_firmware/pull/25618))
+* Migrate `g_led_config` to DD (M2) ([#25619](https://github.com/qmk/qmk_firmware/pull/25619))
+* Migrate `g_led_config` to DD (M3) ([#25620](https://github.com/qmk/qmk_firmware/pull/25620))
+* Migrate `g_led_config` to DD (NO) ([#25621](https://github.com/qmk/qmk_firmware/pull/25621))
+* Migrate `g_led_config` to DD (P) ([#25622](https://github.com/qmk/qmk_firmware/pull/25622))
+* Migrate `g_led_config` to DD (QR) ([#25623](https://github.com/qmk/qmk_firmware/pull/25623))
+* Migrate `g_led_config` to DD (S) ([#25624](https://github.com/qmk/qmk_firmware/pull/25624))
+* Migrate `g_led_config` to DD (TUW) ([#25625](https://github.com/qmk/qmk_firmware/pull/25625))
+* Remove idobao *_DISABLE_UNDERGLOW behaviour ([#25638](https://github.com/qmk/qmk_firmware/pull/25638))
+* Migrate `g_led_config` to DD (YZ) ([#25650](https://github.com/qmk/qmk_firmware/pull/25650))
+* Tidy Keebio keyboards ([#25653](https://github.com/qmk/qmk_firmware/pull/25653))
+* Remove encoder resolution where duplicating defaults ([#25654](https://github.com/qmk/qmk_firmware/pull/25654))
+* Custom oled fonts cleanup ([#25665](https://github.com/qmk/qmk_firmware/pull/25665))
+* Binepad KnobX1 - refactor `x1_layer_led` function as weak ([#25668](https://github.com/qmk/qmk_firmware/pull/25668))
+* Add DD {LED,RGB}_MATRIX_DEFAULT_FLAGS support ([#25671](https://github.com/qmk/qmk_firmware/pull/25671))
+* keyboards: Add Royal Kludge RK61 ([#25694](https://github.com/qmk/qmk_firmware/pull/25694))
+* Add TRKeyboard TRK2 keyboard ([#25754](https://github.com/qmk/qmk_firmware/pull/25754))
+
+Keyboard fixes:
+* Fixup `kprepublic/bm60hsrgb/rev2` ([#25644](https://github.com/qmk/qmk_firmware/pull/25644))
+* Fixup `kprepublic/bm60hsrgb_iso/rev2` ([#25648](https://github.com/qmk/qmk_firmware/pull/25648))
+* Fixup `kprepublic/bm60hsrgb_poker/rev2` ([#25649](https://github.com/qmk/qmk_firmware/pull/25649))
+* Fixup `rgbkb/pan` ([#25678](https://github.com/qmk/qmk_firmware/pull/25678))
+* Align use of keymap level `_kb` callbacks ([#25774](https://github.com/qmk/qmk_firmware/pull/25774))
+
+Others:
+* Rework converter docs ([#18314](https://github.com/qmk/qmk_firmware/pull/18314))
+* Update USBaspLoader ISP instructions ([#25590](https://github.com/qmk/qmk_firmware/pull/25590))
+* Add LED/RGB Matrix flags API docs ([#25673](https://github.com/qmk/qmk_firmware/pull/25673))
+
+Bugs:
+* Fix single key combos activating only once ([#25198](https://github.com/qmk/qmk_firmware/pull/25198))
+* Fix RGB matrix not syncing and turning off properly on timeout ([#25467](https://github.com/qmk/qmk_firmware/pull/25467))
+* Fix drv haptics docs by using the correct function name ([#25733](https://github.com/qmk/qmk_firmware/pull/25733))
+* Fix Magic GUI masking logic ([#25780](https://github.com/qmk/qmk_firmware/pull/25780))
+* Fix Speculative Hold to enable also right-handed RSFT, RCTL by default. ([#25797](https://github.com/qmk/qmk_firmware/pull/25797))
+* Fix community layout keymap discovery ([#25802](https://github.com/qmk/qmk_firmware/pull/25802))
+* Fix preference of output file for 'qmk generate-autocorrect-data' ([#25818](https://github.com/qmk/qmk_firmware/pull/25818))

docs/ChangeLog/20260222.md

@@ -0,0 +1,75 @@
+# QMK Breaking Changes - 2026 Feb 22 Changelog
+
+## Deprecation Notices
+
+### Removal of deprecated GPIO defines ([#26028](https://github.com/qmk/qmk_firmware/pull/26028))
+
+QMK has long used Arduino-style GPIO naming conventions. This has been confusing for users, as over time they've had new variations added, as well as users mistakenly thinking that QMK supports the rest of the Arduino ecosystem.
+
+The decision was made to rename the GPIO manipulation functions with ones matching QMK Firmware's code styling.
+
+Previous backwards compatibility has now been removed. see the [GPIO Control](../drivers/gpio#macros) documentation for more information.
+
+### Removal of deprecated isLeftHand ([25897](https://github.com/qmk/qmk_firmware/pull/25897))
+
+Users should migrate to `is_keyboard_left()` found in `split_util.h` instead. For example:
+
+```diff
+oled_rotation_t oled_init_user(oled_rotation_t rotation) {
+-    return isLeftHand ? OLED_ROTATION_180 : OLED_ROTATION_0;
++    return is_keyboard_left() ? OLED_ROTATION_180 : OLED_ROTATION_0;
+}
+```
+
+The deprecated variable `isLeftHand` will be removed in a future breaking changes cycle.
+
+## Full changelist
+
+Core:
+* Refactor Makefile logic for locating keymaps ([#25808](https://github.com/qmk/qmk_firmware/pull/25808))
+* Move shutdown delay to audio feature ([#25859](https://github.com/qmk/qmk_firmware/pull/25859))
+* Refactor core use of deprecated `isLeftHand` ([#25888](https://github.com/qmk/qmk_firmware/pull/25888))
+* Allow custom data sync for community modules ([#25955](https://github.com/qmk/qmk_firmware/pull/25955))
+* Remove an unreachable break statement ([#26006](https://github.com/qmk/qmk_firmware/pull/26006))
+* Remove duplicate host.h ([#26007](https://github.com/qmk/qmk_firmware/pull/26007))
+* Remove redundant EEPROM update ([#26008](https://github.com/qmk/qmk_firmware/pull/26008))
+* Remove redundant unsigned comparison in apa102_set_brightness ([#26010](https://github.com/qmk/qmk_firmware/pull/26010))
+* Remove unused headers ([#26011](https://github.com/qmk/qmk_firmware/pull/26011))
+* Return INVALID_DEFERRED_TOKEN on allocation failure ([#26012](https://github.com/qmk/qmk_firmware/pull/26012))
+* Remove deprecated GPIO defines ([#26028](https://github.com/qmk/qmk_firmware/pull/26028))
+
+CLI:
+* Enforce EOL when formatting files ([#24989](https://github.com/qmk/qmk_firmware/pull/24989))
+* Allow keymap.json to disable config flags ([#25502](https://github.com/qmk/qmk_firmware/pull/25502))
+* Remove unused `qmk.keymap.write_file`/`qmk.keymap.write_json` ([#25854](https://github.com/qmk/qmk_firmware/pull/25854))
+* Include userspace version (QMK_USERSPACE_VERSION) in version.h ([#25882](https://github.com/qmk/qmk_firmware/pull/25882))
+* Lint out-of-bounds bootmagic config ([#25899](https://github.com/qmk/qmk_firmware/pull/25899))
+* Report permission issues in `qmk doctor` ([#25931](https://github.com/qmk/qmk_firmware/pull/25931))
+* Minor alignment of CLI formatting commands ([#25946](https://github.com/qmk/qmk_firmware/pull/25946))
+* Update lint to validate keymap names ([#25969](https://github.com/qmk/qmk_firmware/pull/25969))
+* Add 'none of the above' to `new-keyboard` dev board prompt ([#25998](https://github.com/qmk/qmk_firmware/pull/25998))
+* Remove `config_h_features` from generated `info.json` ([#26024](https://github.com/qmk/qmk_firmware/pull/26024))
+* Promote duplication of defaults check to error ([#26025](https://github.com/qmk/qmk_firmware/pull/26025))
+
+Keyboards:
+* Add Soldered Macro Pad ([#25834](https://github.com/qmk/qmk_firmware/pull/25834))
+* Remove redundant URLs from `.json` ([#25856](https://github.com/qmk/qmk_firmware/pull/25856))
+* Guard encoder behaviour on `projectcain/vault*` ([#25864](https://github.com/qmk/qmk_firmware/pull/25864))
+* Refactor keyboard/keymap use of deprecated `isLeftHand` ([#25891](https://github.com/qmk/qmk_firmware/pull/25891))
+* Remove some unnecessary matrix externs ([#25975](https://github.com/qmk/qmk_firmware/pull/25975))
+* Migrate ROW_SHIFTER to core MATRIX_ROW_SHIFTER ([#25977](https://github.com/qmk/qmk_firmware/pull/25977))
+
+Keyboard fixes:
+* Fix out-of-bounds bootmagic config ([#25898](https://github.com/qmk/qmk_firmware/pull/25898))
+* Fix incorrect `matrix_scan_custom` implementations ([#25999](https://github.com/qmk/qmk_firmware/pull/25999))
+
+Others:
+* Add missing labels to DD keycode definitions ([#25503](https://github.com/qmk/qmk_firmware/pull/25503))
+* Copilot instructions for pull requests ([#25857](https://github.com/qmk/qmk_firmware/pull/25857))
+
+Bugs:
+* Fix flash wear leveling sector calculation ([#24776](https://github.com/qmk/qmk_firmware/pull/24776))
+* [Bugfix] WS2812 indexing in split boards ([#25407](https://github.com/qmk/qmk_firmware/pull/25407))
+* Correctly resolve keyboard alias during 'qmk new-keymap' ([#25570](https://github.com/qmk/qmk_firmware/pull/25570))
+* Fixes for is31fl3729 LED matrix driver off-by-one errors ([#25902](https://github.com/qmk/qmk_firmware/pull/25902))
+* Match Key override index type to bounds type to prevent overflow ([#25939](https://github.com/qmk/qmk_firmware/pull/25939))

docs/_sidebar.json

@@ -214,7 +214,7 @@
                     { "text": "My Pull Request Was Flagged", "link": "/breaking_changes_instructions" },
                     {
                         "text": "Most Recent ChangeLog",
-                        "link": "/ChangeLog/20250831"
+                        "link": "/ChangeLog/20260222"
                     },
                     { "text": "Past Breaking Changes", "link": "/breaking_changes_history" },
                     { "text": "Deprecation Policy", "link": "/support_deprecation_policy" }

docs/breaking_changes.md

@@ -10,25 +10,25 @@ Practically, this means QMK merges the `develop` branch into the `master` branch
 
 ## What has been included in past Breaking Changes?
 
+* [2026 Feb 22](ChangeLog/20260222)
+* [2025 Nov 30](ChangeLog/20251130)
 * [2025 Aug 31](ChangeLog/20250831)
-* [2025 May 25](ChangeLog/20250525)
-* [2025 Feb 23](ChangeLog/20250223)
 * [Older Breaking Changes](breaking_changes_history)
 
 ## When is the next Breaking Change?
 
-The next Breaking Change is scheduled for November 30, 2025.
+The next Breaking Change is scheduled for May 31, 2026.
 
 ### Important Dates
 
-* 2025 Aug 31 - `develop` is tagged with a new release version. Each push to `master` is subsequently merged to `develop` by GitHub actions.
-* 2025 Nov 2 - `develop` closed to new PRs.
-* 2025 Nov 2 - Call for testers.
-* 2025 Nov 16 - Last day for merges -- after this point `develop` is locked for testing and accepts only bugfixes
-* 2025 Nov 23 - `develop` is locked, only critical bugfix PRs merged.
-* 2025 Nov 28 - `master` is locked, no PRs merged.
-* 2025 Nov 30 - Merge `develop` to `master`.
-* 2025 Nov 30 - `master` is unlocked. PRs can be merged again.
+* 2025 Feb 22 - `develop` is tagged with a new release version. Each push to `master` is subsequently merged to `develop` by GitHub actions.
+* 2026 May 3 - `develop` closed to new PRs.
+* 2026 May 3 - Call for testers.
+* 2026 May 17 - Last day for merges -- after this point `develop` is locked for testing and accepts only bugfixes
+* 2026 May 24 - `develop` is locked, only critical bugfix PRs merged.
+* 2026 May 29 - `master` is locked, no PRs merged.
+* 2026 May 31 - Merge `develop` to `master`.
+* 2026 May 31 - `master` is unlocked. PRs can be merged again.
 
 ## What changes will be included?
 

docs/breaking_changes_history.md

@@ -2,6 +2,8 @@
 
 This page links to all previous changelogs from the QMK Breaking Changes process.
 
+* [2026 Feb 22](ChangeLog/20260222) - version 0.32.0
+* [2025 Nov 30](ChangeLog/20251130) - version 0.31.0
 * [2025 Aug 31](ChangeLog/20250831) - version 0.30.0
 * [2025 May 25](ChangeLog/20250525) - version 0.29.0
 * [2025 Feb 23](ChangeLog/20250223) - version 0.28.0

docs/cli.md

@@ -4,47 +4,18 @@
 
 The QMK CLI (command line interface) makes building and working with QMK keyboards easier. We have provided a number of commands to simplify and streamline tasks such as obtaining and compiling the QMK firmware, creating keymaps, and more.
 
-### Requirements {#requirements}
+### Installation {#installation}
 
-QMK requires Python 3.9 or greater. We try to keep the number of requirements small but you will also need to install the packages listed in [`requirements.txt`](https://github.com/qmk/qmk_firmware/blob/master/requirements.txt). These are installed automatically when you install the QMK CLI.
-
-### Install Using Homebrew (macOS, some Linux) {#install-using-homebrew}
-
-If you have installed [Homebrew](https://brew.sh) you can tap and install QMK:
+The recommended way to install the QMK CLI and all necessary dependencies (toolchains, flashing utilities, udev rules on Linux) is to use the bootstrapper script:
 
 ```
-brew install qmk/qmk/qmk
-export QMK_HOME='~/qmk_firmware' # Optional, set the location for `qmk_firmware`
-qmk setup  # This will clone `qmk/qmk_firmware` and optionally set up your build environment
+curl -fsSL https://install.qmk.fm | sh
 ```
 
-### Install Using uv {#install-using-uv}
-
-If you have installed [uv](https://docs.astral.sh/uv/), the QMK CLI can be installed and managed as a uv tool:
+For more options, run:
 
 ```
-uv tool install qmk
-export QMK_HOME='~/qmk_firmware' # Optional, set the location for `qmk_firmware`
-qmk setup  # This will clone `qmk/qmk_firmware` and optionally set up your build environment
+curl -fsSL https://install.qmk.fm | sh -s -- --help
 ```
 
-This installation can be updated via `uv tool upgrade qmk`. See [Upgrading tools](https://docs.astral.sh/uv/guides/tools/#upgrading-tools) for more information.
-
-### Install Using pip {#install-using-easy_install-or-pip}
-
-If your system is not listed above you can install QMK manually. First ensure that you have Python 3.9 (or later) installed and have installed pip. Then install QMK with this command:
-
-```
-python3 -m pip install qmk
-export QMK_HOME='~/qmk_firmware' # Optional, set the location for `qmk_firmware`
-qmk setup  # This will clone `qmk/qmk_firmware` and optionally set up your build environment
-```
-
-### Packaging For Other Operating Systems {#packaging-for-other-operating-systems}
-
-We are looking for people to create and maintain a `qmk` package for more operating systems. If you would like to create a package for your OS please follow these guidelines:
-
-* Follow best practices for your OS when they conflict with these guidelines
-    * Document why in a comment when you do deviate
-* Install using a virtualenv
-* Instruct the user to set the environment variable `QMK_HOME` to have the firmware source checked out somewhere other than `~/qmk_firmware`.
+For detailed setup instructions, see [Setting Up Your QMK Environment](newbs_getting_started#set-up-your-environment).

docs/cli_development.md

@@ -12,11 +12,11 @@ If you intend to maintain keyboards and/or contribute to QMK, you can enable the
 
 `qmk config user.developer=True`
 
-This will allow you to see all available subcommands.  
-**Note:** You will have to install additional requirements:  
-```
-python3 -m pip install -r requirements-dev.txt
-```
+This will allow you to see all available subcommands.
+
+::: tip
+If you installed QMK using the bootstrapper (`curl -fsSL https://install.qmk.fm | sh`), the development requirements are already installed.
+:::
 
 # Subcommands
 

docs/custom_matrix.md

@@ -74,7 +74,7 @@ void matrix_init(void) {
     // TODO: initialize hardware and global matrix state here
 
     // Unless hardware debouncing - Init the configured debounce routine
-    debounce_init(MATRIX_ROWS);
+    debounce_init();
 
     // This *must* be called for correct keyboard behavior
     matrix_init_kb();
@@ -86,7 +86,7 @@ uint8_t matrix_scan(void) {
     // TODO: add matrix scanning routine here
 
     // Unless hardware debouncing - use the configured debounce routine
-    changed = debounce(raw_matrix, matrix, MATRIX_ROWS, changed);
+    changed = debounce(raw_matrix, matrix, changed);
 
     // This *must* be called for correct keyboard behavior
     matrix_scan_kb();

docs/documentation_best_practices.md

@@ -14,6 +14,10 @@ Example:
 This page covers my super cool feature. You can use this feature to make coffee, squeeze fresh oj, and have an egg mcmuffin and hashbrowns delivered from your local macca's by drone.
 ```
 
+# Paragraphs
+
+Do not use hard line breaks within the raw Markdown for each paragraph. These are optional in Markdown, and have no effect on the rendered output. This means each raw paragraph will be a single long line in your editor (best viewed with line wrapping enabled).
+
 # Headings
 
 Your page should generally have multiple "H1" headings. Only H1 and H2 headings will included in the Table of Contents, so plan them out appropriately. Excess width should be avoided in H1 and H2 headings to prevent the Table of Contents from getting too wide.

docs/driver_installation_zadig.md

@@ -4,7 +4,7 @@ QMK presents itself to the host as a regular HID keyboard device, and as such re
 
 There are two notable exceptions: the Caterina bootloader, usually seen on Pro Micros, and the HalfKay bootloader shipped with PJRC Teensys, appear as a serial port and a generic HID device respectively, and so do not require a driver.
 
-We recommend the use of the [Zadig](https://zadig.akeo.ie/) utility. If you have set up the development environment with MSYS2, the `qmk_install.sh` script will have already installed the drivers for you.
+We recommend the use of the [Zadig](https://zadig.akeo.ie/) utility. If you have set up the development environment with MSYS2, the QMK CLI installation script will have already installed the drivers for you.
 
 ## Installation
 
@@ -22,7 +22,7 @@ If Zadig lists one or more devices with the `HidUsb` driver, your keyboard is pr
 
 If the arrow appears green, select the driver, and click **Install Driver**. See the [list of known bootloaders](#list-of-known-bootloaders) for the correct driver to install.
 
-![Zadig with a bootloader driver correctly installed](https://i.imgur.com/b8VgXzx.png)
+![Zadig with a bootloader driver correctly installed](/b8VgXzx.png)
 
 Finally, unplug and replug the keyboard to make sure the new driver has been loaded. If you are using the QMK Toolbox to flash, exit and restart it too, as it can sometimes fail to recognize the driver change.
 
@@ -30,15 +30,15 @@ Finally, unplug and replug the keyboard to make sure the new driver has been loa
 
 If you find that you can no longer type with the keyboard, you may have accidentally replaced the driver for the keyboard itself instead of for the bootloader. This can happen when the keyboard is not in the bootloader mode. You can easily confirm this in Zadig - a healthy keyboard has the `HidUsb` driver installed on all of its interfaces:
 
-![A healthy keyboard as seen by Zadig](https://i.imgur.com/Hx0E5kC.png)
+![A healthy keyboard as seen by Zadig](/Hx0E5kC.png)
 
 Open the Device Manager, select **View → Devices by container**, and look for an entry with your keyboard's name.
 
-![The board with the wrong driver installed, in Device Manager](https://i.imgur.com/o7WLvBl.png)
+![The board with the wrong driver installed, in Device Manager](/o7WLvBl.png)
 
 Right-click each entry and hit **Uninstall device**. Make sure to tick **Delete the driver software for this device** first if it appears.
 
-![The Device Uninstall dialog, with the "delete driver" checkbox ticked](https://i.imgur.com/aEs2RuA.png)
+![The Device Uninstall dialog, with the "delete driver" checkbox ticked](/aEs2RuA.png)
 
 Click **Action → Scan for hardware changes**. At this point, you should be able to type again. Double check in Zadig that the keyboard device(s) are using the `HidUsb` driver. If so, you're all done, and your board should be functional again! Otherwise, repeat this process until Zadig reports the correct driver.
 
@@ -54,11 +54,11 @@ Open the Device Manager, select **View → Devices by container**, and look for
 
 Find the `Inf name` value in the Details tab of the device properties. This should generally be something like `oemXX.inf`:
 
-![Device properties showing the Inf name value](https://i.imgur.com/Bu4mk9m.png)
+![Device properties showing the Inf name value](/Bu4mk9m.png)
 
 Then, open a new Command Prompt window as an Administrator (type in `cmd` into the Start menu and press Ctrl+Shift+Enter). Run `pnputil /enum-drivers` to verify the `Inf name` matches the `Published Name` field of one of the entries:
 
-![pnputil output with matching driver highlighted](https://i.imgur.com/3RrSjzW.png)
+![pnputil output with matching driver highlighted](/3RrSjzW.png)
 
 Run `pnputil /delete-driver oemXX.inf /uninstall`. This will delete the driver and remove it from any devices using it. Note that this will not uninstall the device itself.
 

docs/drivers/i2c.md

@@ -221,6 +221,31 @@ Receive multiple bytes from the selected I2C device.
 
 ---
 
+### `i2c_status_t i2c_transmit_and_receive(uint8_t address, const uint8_t* tx_data, uint16_t tx_length, uint8_t* rx_data, uint16_t rx_length, uint16_t timeout)` {#api-i2c-transmit-and-receive}
+
+Send and receive multiple bytes from the selected I2C device.
+
+#### Arguments {#api-i2c-transmit-and-receive-arguments}
+
+ - `uint8_t address`
+   The 7-bit I2C address of the device.
+ - `const uint8_t* tx_data`
+   A pointer to the data to transmit.
+ - `uint16_t tx_length`
+   The number of bytes to write. Take care not to overrun the length of `tx_data`.
+ - `uint8_t* rx_data`
+   A pointer to a buffer to read into.
+ - `uint16_t rx_length`
+   The number of bytes to read. Take care not to overrun the length of `data`.
+ - `uint16_t timeout`
+   The time in milliseconds to wait for a response from the target device.
+
+#### Return Value {#api-i2c-transmit-and-receive-return}
+
+`I2C_STATUS_TIMEOUT` if the timeout period elapses, `I2C_STATUS_ERROR` if some other error occurs, otherwise `I2C_STATUS_SUCCESS`.
+
+---
+
 ### `i2c_status_t i2c_write_register(uint8_t devaddr, uint8_t regaddr, const uint8_t* data, uint16_t length, uint16_t timeout)` {#api-i2c-write-register}
 
 Write to a register with an 8-bit address on the I2C device.

docs/drivers/ws2812.md

@@ -292,7 +292,7 @@ Set the color of a single LED. This function does not immediately update the LED
 
 ---
 
-### `void ws812_set_color_all(uint8_t red, uint8_t green, uint8_t blue)` {#api-ws2812-set-color-all}
+### `void ws2812_set_color_all(uint8_t red, uint8_t green, uint8_t blue)` {#api-ws2812-set-color-all}
 
 Set the color of all LEDs.
 

docs/easy_maker.md

@@ -24,7 +24,7 @@ As its name implies Direct Pin works by connecting one switch per pin. The other
 
 Here is a schematic showing how we connect a single button to pin A3 on a ProMicro:
 
-![Schematic diagram showing a ProMicro with a wire coming out of A3, connecting to the left side of a switch. Another wire comes out of the right side of the switch to connect to the Ground Plane.](https://i.imgur.com/JcDhZll.png)
+![Schematic diagram showing a ProMicro with a wire coming out of A3, connecting to the left side of a switch. Another wire comes out of the right side of the switch to connect to the Ground Plane.](/JcDhZll.png)
 
 Once you have wired your switches you can assign keycodes to each pin and build a firmware by selecting the MCU you are using from the Keyboard dropdown. Use this link to show only Easy Maker Direct Pin:
 

docs/faq_build.md

@@ -19,13 +19,10 @@ Note that running `make` with `sudo` is generally ***not*** a good idea, and you
 
 ### Linux `udev` Rules {#linux-udev-rules}
 
-On Linux, you'll need proper privileges to communicate with the bootloader device. You can either use `sudo` when flashing firmware (not recommended), or place [this file](https://github.com/qmk/qmk_firmware/tree/master/util/udev/50-qmk.rules) into `/etc/udev/rules.d/`.
-
-Once added, run the following:
+On Linux, you'll need proper privileges to communicate with the bootloader device. You can either use `sudo` when flashing firmware (not recommended), or install the udev rules from the [qmk_udev](https://github.com/qmk/qmk_udev) repository by running:
 
 ```
-sudo udevadm control --reload-rules
-sudo udevadm trigger
+util/install_udev.sh
 ```
 
 **Note:** With older versions of ModemManager (< 1.12), filtering only works when not in strict mode. The following commands can update that setting:
@@ -44,7 +41,7 @@ Pro Micro (Atmega32u4), make sure to include `CONFIG_USB_ACM=y`. Other devices m
 
 Issues encountered when flashing keyboards on Windows are most often due to having the wrong drivers installed for the bootloader, or none at all.
 
-Re-running the QMK installation script (`./util/qmk_install.sh` from the `qmk_firmware` directory in MSYS2 or WSL) or reinstalling the QMK Toolbox may fix the issue. Alternatively, you can download and run the [`qmk_driver_installer`](https://github.com/qmk/qmk_driver_installer) package manually.
+Re-running the QMK installation script (`curl -fsSL https://install.qmk.fm | sh`) or reinstalling the QMK Toolbox may fix the issue. Alternatively, you can download and run the [`qmk_driver_installer`](https://github.com/qmk/qmk_driver_installer) package manually.
 
 If that doesn't work, then you may need to download and run Zadig. See [Bootloader Driver Installation with Zadig](driver_installation_zadig) for more detailed information.
 

docs/faq_keymap.md

@@ -13,7 +13,7 @@ Keycodes are actually defined in [quantum/keycode.h](https://github.com/qmk/qmk_
 There are 3 standard keyboard layouts in use around the world- ANSI, ISO, and JIS. North America primarily uses ANSI, Europe and Africa primarily use ISO, and Japan uses JIS. Regions not mentioned typically use either ANSI or ISO. The keycodes corresponding to these layouts are shown here:
 
 <!-- Source for this image: https://www.keyboard-layout-editor.com/#/gists/bf431647d1001cff5eff20ae55621e9a -->
-![Keyboard Layout Image](https://i.imgur.com/5wsh5wM.png)
+![Keyboard Layout Image](/5wsh5wM.png)
 
 ## How Can I Make Custom Names For Complex Keycodes?
 

docs/feature_converters.md

@@ -2,8 +2,22 @@
 
 This page documents the automated process for converting keyboards to use drop-in replacement controllers. This process is designed to be easy to use and can be completed in a few simple steps.
 
+You can generate the firmware by appending `-e CONVERT_TO=<target>` to your compile/flash command. For example:
+
+```sh
+qmk flash -c -kb keebio/bdn9/rev1 -km default -e CONVERT_TO=proton_c
+```
+
+You can also configure this within your [keymap](#keymap) to accomplish the same thing.
+
+::: tip
+If you get build errors, you will need to convert the keyboard's code to be [compatible](#keyboard-req) with the converter feature, or provide additional [keymap](#keymap-add) configuration.
+:::
+
 ## Supported Converters
 
+Each converter category is broken down by its declared `pin compatibility`. This ensures that only valid combinations are attempted.
+
 The following converters are available at this time:
 
 | From       | To                |
@@ -28,86 +42,56 @@ The following converters are available at this time:
 | `elite_c`  | `helios`          |
 | `elite_c`  | `liatris`         |
 
+## Configuration
 
-## Overview
+Configuring a converter to use can be done by adding one of the following lines to your keymaps's configuration:
 
-Each converter category is broken down by its declared `pin compatibility`. This ensures that only valid combinations are attempted. You can generate the firmware by appending `-e CONVERT_TO=<target>` to your compile/flash command. For example:
+:::::tabs
 
-```sh
-qmk flash -c -kb keebio/bdn9/rev1 -km default -e CONVERT_TO=proton_c
+==== keymap.json
+
+```json [keymap.json]
+{
+    "version": 1,
+    "keyboard": "keebio/bdn9/rev1",
+    "keymap": "keebio_bdn9_rev1_layout_2025-05-20",
+    "converter": "proton_c", // [!code focus]
+    "layout": "LAYOUT",
+}
 ```
 
-You can also add the same `CONVERT_TO=<target>` to your keymap's `rules.mk`, which will accomplish the same thing.
-
-::: tip
-If you get errors about `PORTB/DDRB`, etc not being defined, you'll need to convert the keyboard's code to use the [GPIO Controls](drivers/gpio) that will work for both ARM and AVR. This shouldn't affect the AVR builds at all.
-:::
-
-### Conditional Configuration
-
-Once a converter is enabled, it exposes the `CONVERT_TO_<target_uppercase>` flag that you can use in your code with `#ifdef`s, For example:
-
-```c
-#ifdef CONVERT_TO_PROTON_C
-    // Proton C code
-#else
-    // Pro Micro code
-#endif
-```
-
-### Pin Compatibility
-
-To ensure compatibility, provide validation, and enable future workflows, a keyboard should declare its `pin compatibility`. For legacy reasons, this is currently assumed to be `promicro`. The following pin compatibility interfaces are currently defined:
-
-| Pin Compatibility | Notes                             |
-|-------------------|-----------------------------------|
-| `promicro`        | Includes RX/TX LEDs               |
-| `elite_c`         | Includes bottom row pins, no LEDs |
-
-To declare the base for conversions, add this line to your keyboard's `rules.mk`:
+==== rules.mk
 
 ```makefile
-PIN_COMPATIBLE = elite_c
+CONVERT_TO = proton_c
 ```
 
-## Pro Micro
+:::::
 
-If a board currently supported in QMK uses a [Pro Micro](https://www.sparkfun.com/products/12640) (or compatible board), the supported alternative controllers are:
+::: tip
+If you get build errors, you will need to convert the keyboard's code to be [compatible](#keyboard-req) with the converter feature, or provide additional [keymap](#keymap-add) configuration.
+:::
 
-| Device                                                                                   | Target            |
-|------------------------------------------------------------------------------------------|-------------------|
-| [Proton C](https://qmk.fm/proton-c/)                                                     | `proton_c`        |
-| [Adafruit KB2040](https://learn.adafruit.com/adafruit-kb2040)                            | `kb2040`          |
-| [SparkFun Pro Micro - RP2040](https://www.sparkfun.com/products/18288)                   | `sparkfun_pm2040` |
-| [Blok](https://boardsource.xyz/store/628b95b494dfa308a6581622)                           | `blok`            |
-| [Bit-C PRO](https://nullbits.co/bit-c-pro)                                               | `bit_c_pro`       |
-| [STeMCell](https://github.com/megamind4089/STeMCell)                                     | `stemcell`        |
-| [customMK Bonsai C4](https://shop.custommk.com/products/bonsai-c4-microcontroller-board) | `bonsai_c4`       |
-| [Elite-Pi](https://keeb.io/products/elite-pi-usb-c-pro-micro-replacement-rp2040)         | `elite_pi`        |
-| [0xCB Helios](https://keeb.supply/products/0xcb-helios)                                  | `helios`          |
-| [Liatris](https://splitkb.com/products/liatris)                                          | `liatris`         |
-| [Imera](https://splitkb.com/products/imera)                                              | `imera`           |
-| [Michi](https://github.com/ci-bus/michi-promicro-rp2040)                                 | `michi`           |
-| [Svlinky](https://github.com/sadekbaroudi/svlinky)                                       | `svlinky`         |
+## Pro Micro Converters
 
-Converter summary:
+If a board currently supported by QMK uses a [Pro Micro](https://www.sparkfun.com/products/12640) (or compatible board), the supported alternative controllers are:
 
-| Target            | Argument                        | `rules.mk`                   | Condition                           |
-|-------------------|---------------------------------|------------------------------|-------------------------------------|
-| `proton_c`        | `-e CONVERT_TO=proton_c`        | `CONVERT_TO=proton_c`        | `#ifdef CONVERT_TO_PROTON_C`        |
-| `kb2040`          | `-e CONVERT_TO=kb2040`          | `CONVERT_TO=kb2040`          | `#ifdef CONVERT_TO_KB2040`          |
-| `sparkfun_pm2040` | `-e CONVERT_TO=sparkfun_pm2040` | `CONVERT_TO=sparkfun_pm2040` | `#ifdef CONVERT_TO_SPARKFUN_PM2040` |
-| `blok`            | `-e CONVERT_TO=blok`            | `CONVERT_TO=blok`            | `#ifdef CONVERT_TO_BLOK`            |
-| `bit_c_pro`       | `-e CONVERT_TO=bit_c_pro`       | `CONVERT_TO=bit_c_pro`       | `#ifdef CONVERT_TO_BIT_C_PRO`       |
-| `stemcell`        | `-e CONVERT_TO=stemcell`        | `CONVERT_TO=stemcell`        | `#ifdef CONVERT_TO_STEMCELL`        |
-| `bonsai_c4`       | `-e CONVERT_TO=bonsai_c4`       | `CONVERT_TO=bonsai_c4`       | `#ifdef CONVERT_TO_BONSAI_C4`       |
-| `rp2040_ce`       | `-e CONVERT_TO=rp2040_ce`       | `CONVERT_TO=rp2040_ce`       | `#ifdef CONVERT_TO_RP2040_CE`       |
-| `elite_pi`        | `-e CONVERT_TO=elite_pi`        | `CONVERT_TO=elite_pi`        | `#ifdef CONVERT_TO_ELITE_PI`        |
-| `helios`          | `-e CONVERT_TO=helios`          | `CONVERT_TO=helios`          | `#ifdef CONVERT_TO_HELIOS`          |
-| `liatris`         | `-e CONVERT_TO=liatris`         | `CONVERT_TO=liatris`         | `#ifdef CONVERT_TO_LIATRIS`         |
-| `imera`           | `-e CONVERT_TO=imera`           | `CONVERT_TO=imera`           | `#ifdef CONVERT_TO_IMERA`           |
-| `michi`           | `-e CONVERT_TO=michi`           | `CONVERT_TO=michi`           | `#ifdef CONVERT_TO_MICHI`           |
-| `svlinky`         | `-e CONVERT_TO=svlinky`         | `CONVERT_TO=svlinky`         | `#ifdef CONVERT_TO_SVLINKY`         |
+| Device                                                                                   | Target            | CLI Argument                    | `rules.mk`                   | Condition                           |
+|------------------------------------------------------------------------------------------|-------------------|---------------------------------|------------------------------|-------------------------------------|
+| [Proton C](https://qmk.fm/proton-c/)                                                     | `proton_c`        | `-e CONVERT_TO=proton_c`        | `CONVERT_TO=proton_c`        | `#ifdef CONVERT_TO_PROTON_C`        |
+| [Adafruit KB2040](https://learn.adafruit.com/adafruit-kb2040)                            | `kb2040`          | `-e CONVERT_TO=kb2040`          | `CONVERT_TO=kb2040`          | `#ifdef CONVERT_TO_KB2040`          |
+| [SparkFun Pro Micro - RP2040](https://www.sparkfun.com/products/18288)                   | `sparkfun_pm2040` | `-e CONVERT_TO=sparkfun_pm2040` | `CONVERT_TO=sparkfun_pm2040` | `#ifdef CONVERT_TO_SPARKFUN_PM2040` |
+| [Blok](https://boardsource.xyz/store/628b95b494dfa308a6581622)                           | `blok`            | `-e CONVERT_TO=blok`            | `CONVERT_TO=blok`            | `#ifdef CONVERT_TO_BLOK`            |
+| [Bit-C PRO](https://nullbits.co/bit-c-pro)                                               | `bit_c_pro`       | `-e CONVERT_TO=bit_c_pro`       | `CONVERT_TO=bit_c_pro`       | `#ifdef CONVERT_TO_BIT_C_PRO`       |
+| [STeMCell](https://github.com/megamind4089/STeMCell)                                     | `stemcell`        | `-e CONVERT_TO=stemcell`        | `CONVERT_TO=stemcell`        | `#ifdef CONVERT_TO_STEMCELL`        |
+| [customMK Bonsai C4](https://shop.custommk.com/products/bonsai-c4-microcontroller-board) | `bonsai_c4`       | `-e CONVERT_TO=bonsai_c4`       | `CONVERT_TO=bonsai_c4`       | `#ifdef CONVERT_TO_BONSAI_C4`       |
+| [RP2040 Community Edition](#rp2040_ce)                                                   | `rp2040_ce`       | `-e CONVERT_TO=rp2040_ce`       | `CONVERT_TO=rp2040_ce`       | `#ifdef CONVERT_TO_RP2040_CE`       |
+| [Elite-Pi](https://keeb.io/products/elite-pi-usb-c-pro-micro-replacement-rp2040)         | `elite_pi`        | `-e CONVERT_TO=elite_pi`        | `CONVERT_TO=elite_pi`        | `#ifdef CONVERT_TO_ELITE_PI`        |
+| [0xCB Helios](https://keeb.supply/products/0xcb-helios)                                  | `helios`          | `-e CONVERT_TO=helios`          | `CONVERT_TO=helios`          | `#ifdef CONVERT_TO_HELIOS`          |
+| [Liatris](https://splitkb.com/products/liatris)                                          | `liatris`         | `-e CONVERT_TO=liatris`         | `CONVERT_TO=liatris`         | `#ifdef CONVERT_TO_LIATRIS`         |
+| [Imera](https://splitkb.com/products/imera)                                              | `imera`           | `-e CONVERT_TO=imera`           | `CONVERT_TO=imera`           | `#ifdef CONVERT_TO_IMERA`           |
+| [Michi](https://github.com/ci-bus/michi-promicro-rp2040)                                 | `michi`           | `-e CONVERT_TO=michi`           | `CONVERT_TO=michi`           | `#ifdef CONVERT_TO_MICHI`           |
+| [Svlinky](https://github.com/sadekbaroudi/svlinky)                                       | `svlinky`         | `-e CONVERT_TO=svlinky`         | `CONVERT_TO=svlinky`         | `#ifdef CONVERT_TO_SVLINKY`         |
 
 ### Proton C {#proton_c}
 
@@ -119,26 +103,26 @@ The Proton C only has one on-board LED (C13), and by default, the TXLED (D5) is
 
 The following defaults are based on what has been implemented for STM32 boards.
 
-| Feature                                      | Notes                                                                                                            |
-|----------------------------------------------|------------------------------------------------------------------------------------------------------------------|
-| [Audio](features/audio)                    | Enabled                                                                                                          |
-| [RGB Lighting](features/rgblight)          | Disabled                                                                                                         |
+| Feature                                    | Notes                                                                                                          |
+|--------------------------------------------|----------------------------------------------------------------------------------------------------------------|
+| [Audio](features/audio)                    | Enabled                                                                                                        |
+| [RGB Lighting](features/rgblight)          | Disabled                                                                                                       |
 | [Backlight](features/backlight)            | Forces [task driven PWM](features/backlight#software-pwm-driver) until ARM can provide automatic configuration |
-| USB Host (e.g. USB-USB converter)            | Not supported (USB host code is AVR specific and is not currently supported on ARM)                              |
-| [Split keyboards](features/split_keyboard) | Partial - heavily dependent on enabled features                                                                  |
+| USB Host (e.g. USB-USB converter)          | Not supported (USB host code is AVR specific and is not currently supported on ARM)                            |
+| [Split keyboards](features/split_keyboard) | Partial - heavily dependent on enabled features                                                                |
 
 ### Adafruit KB2040 {#kb2040}
 
 The following defaults are based on what has been implemented for [RP2040](platformdev_rp2040) boards.
 
-| Feature                                      | Notes                                                                                                            |
-|----------------------------------------------|------------------------------------------------------------------------------------------------------------------|
-| [RGB Lighting](features/rgblight)          | Enabled via `PIO` vendor driver                                                                                  |
+| Feature                                    | Notes                                                                                                          |
+|--------------------------------------------|----------------------------------------------------------------------------------------------------------------|
+| [RGB Lighting](features/rgblight)          | Enabled via `PIO` vendor driver                                                                                |
 | [Backlight](features/backlight)            | Forces [task driven PWM](features/backlight#software-pwm-driver) until ARM can provide automatic configuration |
-| USB Host (e.g. USB-USB converter)            | Not supported (USB host code is AVR specific and is not currently supported on ARM)                              |
-| [Split keyboards](features/split_keyboard) | Partial via `PIO` vendor driver - heavily dependent on enabled features                                          |
+| USB Host (e.g. USB-USB converter)          | Not supported (USB host code is AVR specific and is not currently supported on ARM)                            |
+| [Split keyboards](features/split_keyboard) | Partial via `PIO` vendor driver - heavily dependent on enabled features                                        |
 
-### SparkFun Pro Micro - RP2040, Blok, Bit-C PRO and Michi {#sparkfun_pm2040 }
+### SparkFun Pro Micro - RP2040, Blok, Bit-C PRO and Michi {#sparkfun_pm2040}
 
 Feature set is identical to [Adafruit KB2040](#kb2040).
 
@@ -177,31 +161,193 @@ Feature set is identical to [Adafruit KB2040](#kb2040). VBUS detection is enable
 
 Feature set is a pro micro equivalent of the [RP2040 Community Edition](#rp2040_ce), except that two of the analog GPIO have been replaced with digital only GPIO. These two were moved to the FPC connector to support the [VIK specification](https://github.com/sadekbaroudi/vik). This means that if you are expecting analog support on all 4 pins as provided on a RP2040 Community Edition pinout, you will not have that. Please see the [Svlinky github page](https://github.com/sadekbaroudi/svlinky) for more details.
 
-## Elite-C
+## Elite-C Converters
 
-If a board currently supported in QMK uses an [Elite-C](https://keeb.io/products/elite-c-low-profile-version-usb-c-pro-micro-replacement-atmega32u4), the supported alternative controllers are:
+If a board currently supported by QMK uses an [Elite-C](https://keeb.io/products/elite-c-low-profile-version-usb-c-pro-micro-replacement-atmega32u4), the supported alternative controllers are:
 
-| Device                                                                           | Target            |
-|----------------------------------------------------------------------------------|-------------------|
-| [STeMCell](https://github.com/megamind4089/STeMCell)                             | `stemcell`        |
-| [Elite-Pi](https://keeb.io/products/elite-pi-usb-c-pro-micro-replacement-rp2040) | `elite_pi`        |
-| [0xCB Helios](https://keeb.supply/products/0xcb-helios)                          | `helios`          |
-| [Liatris](https://splitkb.com/products/liatris)                                  | `liatris`         |
+| Device                                                                           | Target      | CLI Argument              | `rules.mk`             | Condition                     |
+|----------------------------------------------------------------------------------|-------------|---------------------------|------------------------|-------------------------------|
+| [STeMCell](https://github.com/megamind4089/STeMCell)                             | `stemcell`  | `-e CONVERT_TO=stemcell`  | `CONVERT_TO=stemcell`  | `#ifdef CONVERT_TO_STEMCELL`  |
+| [RP2040 Community Edition](#rp2040_ce_elite)                                     | `rp2040_ce` | `-e CONVERT_TO=rp2040_ce` | `CONVERT_TO=rp2040_ce` | `#ifdef CONVERT_TO_RP2040_CE` |
+| [Elite-Pi](https://keeb.io/products/elite-pi-usb-c-pro-micro-replacement-rp2040) | `elite_pi`  | `-e CONVERT_TO=elite_pi`  | `CONVERT_TO=elite_pi`  | `#ifdef CONVERT_TO_ELITE_PI`  |
+| [0xCB Helios](https://keeb.supply/products/0xcb-helios)                          | `helios`    | `-e CONVERT_TO=helios`    | `CONVERT_TO=helios`    | `#ifdef CONVERT_TO_HELIOS`    |
+| [Liatris](https://splitkb.com/products/liatris)                                  | `liatris`   | `-e CONVERT_TO=liatris`   | `CONVERT_TO=liatris`   | `#ifdef CONVERT_TO_LIATRIS`   |
 
-Converter summary:
-
-| Target            | Argument                        | `rules.mk`                   | Condition                           |
-|-------------------|---------------------------------|------------------------------|-------------------------------------|
-| `stemcell`        | `-e CONVERT_TO=stemcell`        | `CONVERT_TO=stemcell`        | `#ifdef CONVERT_TO_STEMCELL`        |
-| `rp2040_ce`       | `-e CONVERT_TO=rp2040_ce`       | `CONVERT_TO=rp2040_ce`       | `#ifdef CONVERT_TO_RP2040_CE`       |
-| `elite_pi`        | `-e CONVERT_TO=elite_pi`        | `CONVERT_TO=elite_pi`        | `#ifdef CONVERT_TO_ELITE_PI`        |
-| `helios`          | `-e CONVERT_TO=helios`          | `CONVERT_TO=helios`          | `#ifdef CONVERT_TO_HELIOS`          |
-| `liatris`         | `-e CONVERT_TO=liatris`         | `CONVERT_TO=liatris`         | `#ifdef CONVERT_TO_LIATRIS`         |
-
-### STeMCell {#stemcell}_elite
+### STeMCell {#stemcell_elite}
 
 Identical to [Pro Micro - STeMCell](#stemcell) with support for the additional bottom row of pins.
 
 ### RP2040 Community Edition {#rp2040_ce_elite}
 
 Identical to [Pro Micro - RP2040 Community Edition](#rp2040_ce) with support for the additional bottom row of pins.
+
+## Advanced Topics
+
+### Keyboard Configuration
+
+To configure a keyboard to allow the converter feature, add the following line to your keyboard's `.json` configuration:
+
+```json [keyboard.json]
+{
+    "maintainer": "QMK",
+    "development_board": "promicro", // [!code focus]
+    "diode_direction": "COL2ROW",
+}
+```
+
+See the [pin compatibility](#pin_compatible) for more information.
+
+#### Additional Requirements {#keyboard-req}
+
+Keyboards must use the platform agnostic abstractions provided by QMK. This includes:
+
+* Use of [GPIO Controls](drivers/gpio).
+
+### Additional Keymap Configuration {#keymap-add}
+
+While effort has been made to make converters as compatible as possible, sometimes additional platform specific configuration is required.
+
+For example, enabling hardware peripherals by adding a keymap level `mcuconf.h` with something like the following:
+```c
+#pragma once
+
+#include_next <mcuconf.h>
+
+#undef RP_SIO_USE_UART0
+#define RP_SIO_USE_UART0 TRUE
+```
+
+You can find details on how to configure drivers on their respective pages.
+
+Alternatively, you may have to disable incompatible features. For example:
+
+:::::tabs
+
+==== keymap.json
+
+```json [keymap.json]
+{
+    "version": 1,
+    "keyboard": "keebio/bdn9/rev1",
+    "keymap": "keebio_bdn9_rev1_layout_2025-05-20",
+    "converter": "proton_c",
+    "config": { // [!code focus]
+        "features": { // [!code focus]
+            "audio": false // [!code focus]
+        }
+    }
+    "layout": "LAYOUT",
+}
+```
+
+==== rules.mk
+
+```makefile
+AUDIO_ENABLE = no
+```
+
+:::::
+
+### Conditional Configuration
+
+Once a converter is enabled, it exposes the `CONVERT_TO_<target_uppercase>` flag that you can use in your code with `#ifdef`s, For example:
+
+```c
+#ifdef CONVERT_TO_PROTON_C
+    // Proton C code
+#else
+    // Pro Micro code
+#endif
+```
+
+### Pin Compatibility {#pin_compatible}
+
+To ensure compatibility, provide validation, and power future workflows, a keyboard should declare its `pin compatibility`. This ensures that only valid combinations are attempted.
+
+::: tip Note
+This will already be configured for you if are using the `promicro` development board preset.
+:::
+
+To declare the base interface for conversions, add the following line to your keyboard's configuration:
+
+```json [keyboard.json]
+{
+    "maintainer": "QMK",
+    "development_board": "elite_c", // [!code focus]
+    "pin_compatible": "elite_c", // [!code focus]
+    "diode_direction": "COL2ROW",
+}
+```
+
+The above example, configures a keyboard for a default of `elite_c` while allowing any of the `elite_c` converter targets.
+
+The framework then allows mapping of pins from `<PIN_COMPATIBLE>` to converter `<target>`.
+
+::: warning
+Mapped pins should adhere strictly to the defined interface, any extras present on the hardware should be ignored.
+:::
+
+#### Available Pin Compatibility
+
+:::::tabs
+
+==== promicro
+
+![promicro](/pin_compatible_promicro.svg)
+
+<!-- ```svgbob
+          pins
+     .-------------.           LEDs
+    |               |      _|_       _|_
+D3 -+-O             |      \ /B0     \ /D5
+D2 -+-O             |      -+-       -+-
+    |               |       |         |
+    |               |
+D1 -+-O           O-+- F4
+D0 -+-O           O-+- F5
+D4 -+-O           O-+- F6
+C6 -+-O           O-+- F7
+D7 -+-O           O-+- B1
+E6 -+-O           O-+- B3
+B4 -+-O           O-+- B2
+B5 -+-O           O-+- B6
+    |               |
+    '---+-+-+-+-+---'
+``` -->
+
+::: info Notes:
+Includes LEDs - these may be mapped to unused/unavailable pins when not present.
+:::
+
+==== elite_c
+
+![elite_c](/pin_compatible_elite_c.svg)
+
+<!-- ```svgbob
+          pins
+     .-------------.
+    |               |
+D3 -+-O             |
+D2 -+-O             |
+    |               |
+    |               |
+D1 -+-O           O-+- F4
+D0 -+-O           O-+- F5
+D4 -+-O           O-+- F6
+C6 -+-O           O-+- F7
+D7 -+-O           O-+- B1
+E6 -+-O           O-+- B3
+B4 -+-O           O-+- B2
+B5 -+-O O O O O O O-+- B6
+    |   | | | | |   |
+    '---+-+-+-+-+---'
+        + + + + +
+        B D C F F
+        7 5 7 1 0
+``` -->
+
+::: info Notes:
+Includes bottom row pins, no LEDs.
+:::
+
+:::::

docs/feature_eeprom.md

@@ -1,14 +1,20 @@
 # Persistent Configuration (EEPROM)
 
-This allows you to configure persistent settings for your keyboard.  These settings are stored in the EEPROM of your controller, and are retained even after power loss. The settings can be read with `eeconfig_read_kb` and `eeconfig_read_user`, and can be written to using `eeconfig_update_kb` and `eeconfig_update_user`. This is useful for features that you want to be able to toggle (like toggling rgb layer indication).  Additionally, you can use `eeconfig_init_kb` and `eeconfig_init_user` to set the default values for the EEPROM.
-
-The complicated part here, is that there are a bunch of ways that you can store and access data via EEPROM, and there is no "correct" way to do this.  However, you only have a DWORD (4 bytes) for each function.
+This allows you to configure persistent settings for your keyboard.  These settings are stored in the EEPROM of your controller, and are retained even after power loss.
 
 Keep in mind that EEPROM has a limited number of writes. While this is very high, it's not the only thing writing to the EEPROM, and if you write too often, you can potentially drastically shorten the life of your MCU.
 
-* If you don't understand the example, then you may want to avoid using this feature, as it is rather complicated.
+::: tip
+If you don't understand the examples, then you may want to avoid using this feature, as it is rather complicated.
+:::
 
-## Example Implementation
+## Basic
+
+The settings can be read with `eeconfig_read_kb` and `eeconfig_read_user`, and can be written to using `eeconfig_update_kb` and `eeconfig_update_user`. This is useful for features that you want to be able to toggle (like toggling rgb layer indication).  Additionally, you can use `eeconfig_init_kb` and `eeconfig_init_user` to set the default values for the EEPROM.
+
+The complicated part here, is that there are a bunch of ways that you can store and access data via EEPROM, and there is no "correct" way to do this.  However, you only have a DWORD (4 bytes) for each function.
+
+### Example Implementation
 
 This is an example of how to add settings, and read and write it. We're using the user keymap for the example here.  This is a complex function, and has a lot going on.  In fact, it uses a lot of the above functions to work!
 
@@ -126,9 +132,111 @@ void eeconfig_init_user(void) {  // EEPROM is getting reset!
 
 And you're done.  The RGB layer indication will only work if you want it to. And it will be saved, even after unplugging the board. And if you use any of the RGB codes, it will disable the layer indication, so that it stays on the mode and color that you set it to.
 
-## 'EECONFIG' Function Documentation
+### Basic API
 
 * Keyboard/Revision: `void eeconfig_init_kb(void)`, `uint32_t eeconfig_read_kb(void)` and `void eeconfig_update_kb(uint32_t val)`
 * Keymap: `void eeconfig_init_user(void)`, `uint32_t eeconfig_read_user(void)` and `void eeconfig_update_user(uint32_t val)`
 
 The `val` is the value of the data that you want to write to EEPROM.  And the `eeconfig_read_*` function return a 32 bit (DWORD) value from the EEPROM.
+
+## Datablock {#datablock}
+
+An extended form exists that allows larger blocks of data to be allocated.
+
+::: info
+When using datablock, the [basic API](#eeconfig-function-documentation) is unavailable.
+:::
+
+:::::tabs
+
+==== keyboard
+
+In `config.h`, define the size required, and optionally a version number:
+
+| Define                       | Default                   | Description                                                      |
+|------------------------------|---------------------------|------------------------------------------------------------------|
+| `EECONFIG_KB_DATA_SIZE`      | `0`                       | Size in bytes for the persistent block of data                   |
+| `EECONFIG_KB_DATA_VERSION`   | `EECONFIG_KB_DATA_SIZE`   | Version number that can be incremented to invalidate stored data |
+
+Which exposes the following API:
+
+```c
+bool     eeconfig_is_kb_datablock_valid(void);
+uint32_t eeconfig_read_kb_datablock(void *data, uint32_t offset, uint32_t length) __attribute__((nonnull));
+uint32_t eeconfig_update_kb_datablock(const void *data, uint32_t offset, uint32_t length) __attribute__((nonnull));
+void     eeconfig_init_kb_datablock(void);
+#    define eeconfig_read_kb_datablock_field(__object, __field) eeconfig_read_kb_datablock(&(__object.__field), offsetof(typeof(__object), __field), sizeof(__object.__field))
+#    define eeconfig_update_kb_datablock_field(__object, __field) eeconfig_update_kb_datablock(&(__object.__field), offsetof(typeof(__object), __field), sizeof(__object.__field))
+```
+
+==== keymap
+
+In `config.h`, define the size required, and optionally a version number:
+
+| Define                       | Default                   | Description                                                      |
+|------------------------------|---------------------------|------------------------------------------------------------------|
+| `EECONFIG_USER_DATA_SIZE`    | `0`                       | Size in bytes for the persistent block of data                   |
+| `EECONFIG_USER_DATA_VERSION` | `EECONFIG_USER_DATA_SIZE` | Version number that can be incremented to invalidate stored data |
+
+Which exposes the following API:
+
+```c
+bool     eeconfig_is_user_datablock_valid(void);
+uint32_t eeconfig_read_user_datablock(void *data, uint32_t offset, uint32_t length) __attribute__((nonnull));
+uint32_t eeconfig_update_user_datablock(const void *data, uint32_t offset, uint32_t length) __attribute__((nonnull));
+void     eeconfig_init_user_datablock(void);
+#    define eeconfig_read_user_datablock_field(__object, __field) eeconfig_read_user_datablock(&(__object.__field), offsetof(typeof(__object), __field), sizeof(__object.__field))
+#    define eeconfig_update_user_datablock_field(__object, __field) eeconfig_update_user_datablock(&(__object.__field), offsetof(typeof(__object), __field), sizeof(__object.__field))
+```
+
+:::::
+
+### Example
+
+This is an example of how to add settings, and read and write it. We're using the user keymap for the example here.
+
+In your `config.h` add:
+
+```c
+#define EECONFIG_USER_DATA_SIZE 8
+```
+
+In your keymap.c file, add:
+
+```c
+#include "debug.h"
+#include "timer.h"
+#include "eeconfig.h"
+
+typedef struct my_config_t {
+    uint64_t data;
+} my_config_t;
+
+static my_config_t config;
+
+void keyboard_post_init_user(void) {
+    if (!eeconfig_is_user_datablock_valid()) {
+        eeconfig_init_user_datablock();
+    }
+
+    eeconfig_read_user_datablock(&config, 0, sizeof(my_config_t));
+}
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+    if (!record->event.pressed) {
+        config.data += 1;
+        eeconfig_update_user_datablock(&config, 0, sizeof(my_config_t));
+    }
+
+    return true;
+}
+
+void housekeeping_task_user(void) {
+    static uint32_t last_sync = 0;
+    if (timer_elapsed32(last_sync) > 1000) {
+        last_sync = timer_read32();
+
+        dprintf("Config: %ld\n", config.data);
+    }
+}
+```

docs/features/autocorrect.md

@@ -8,7 +8,7 @@ The feature maintains a small buffer of recent key presses. On each key press, i
 
 The tricky part is how to efficiently check the buffer for typos. We don’t want to spend too much memory or time on storing or searching the typos. A good solution is to represent the typos with a trie data structure. A trie is a tree data structure where each node is a letter, and words are formed by following a path to one of the leaves.
 
-![An example trie](https://i.imgur.com/HL5DP8H.png)
+![An example trie](/HL5DP8H.png)
 
 Since we search whether the buffer ends in a typo, we store the trie writing in reverse. The trie is queried starting from the last letter, then second to last letter, and so on, until either a letter doesn’t match or we reach a leaf, meaning a typo was found.
 
@@ -279,7 +279,7 @@ All autocorrection data is stored in a single flat array autocorrect_data. Each
 * 01 ⇒ branching node: a trie node with multiple children.
 * 10 ⇒ leaf node: a leaf, corresponding to a typo and storing its correction.
 
-![An example trie](https://i.imgur.com/HL5DP8H.png)
+![An example trie](/HL5DP8H.png)
 
 **Branching node**. Each branch is encoded with one byte for the keycode (KC_A–KC_Z) followed by a link to the child node. Links between nodes are 16-bit byte offsets relative to the beginning of the array, serialized in little endian order.
 

docs/features/backlight.md

@@ -227,7 +227,7 @@ In this typical example, the backlight LEDs are all connected in parallel toward
 A pulldown resistor is also placed between the gate pin and ground to keep it at a defined state when it is not otherwise being driven by the MCU.
 The values of these resistors are not critical - see [this Electronics StackExchange question](https://electronics.stackexchange.com/q/68748) for more information.
 
-![Backlight example circuit](https://i.imgur.com/BmAvoUC.png)
+![Backlight example circuit](/BmAvoUC.png)
 
 ## API {#api}
 

docs/features/community_modules.md

@@ -95,6 +95,10 @@ The use of `features` matches the definition normally provided within `keyboard.
 
 The `keycodes` array allows a module to provide new keycodes (as well as corresponding aliases) to a keymap.
 
+### `config.h`
+
+This file will be automatically added to the build as if it were present in the keyboard or keymap.
+
 ### `rules.mk` / `post_rules.mk`
 
 These two files follows standard QMK build system logic, allowing for `Makefile`-style customisation as if it were present in the keyboard or keymap.
@@ -131,6 +135,10 @@ This file defines LED matrix effects in the same form as used with `led_matrix_k
 
 This file defines RGB matrix effects in the same form as used with `rgb_matrix_kb.inc` and `rgb_matrix_user.inc` (see [Custom RGB Matrix Effects](rgb_matrix#custom-rgb-matrix-effects)). Effect mode names are prepended with `RGB_MATRIX_COMMUNITY_MODULE_`.
 
+### Custom split keyboard data sync
+
+Defines follow the convention, `SPLIT_TRANSACTION_IDS_MODULE_<MODULE>` (see [Custom data sync](split_keyboard#custom-data-sync)). 
+
 ### Compatible APIs
 
 Community Modules may provide specializations for the following APIs:

docs/features/dynamic_macros.md

@@ -32,12 +32,13 @@ For the details about the internals of the dynamic macros, please read the comme
 
 There are a number of options added that should allow some additional degree of customization
 
-|Define                      |Default         |Description                                                                                                      |
-|----------------------------|----------------|-----------------------------------------------------------------------------------------------------------------|
-|`DYNAMIC_MACRO_SIZE`        |128             |Sets the amount of memory that Dynamic Macros can use. This is a limited resource, dependent on the controller.  |
-|`DYNAMIC_MACRO_USER_CALL`   |*Not defined*   |Defining this falls back to using the user `keymap.c` file to trigger the macro behavior.                        |
-|`DYNAMIC_MACRO_NO_NESTING`  |*Not Defined*   |Defining this disables the ability to call a macro from another macro (nested macros).                           | 
-|`DYNAMIC_MACRO_DELAY`        |*Not Defined*   |Sets the waiting time (ms unit) when sending each key.                                                           |
+|Define                                    |Default         |Description                                                                                                      |
+|------------------------------------------|----------------|-----------------------------------------------------------------------------------------------------------------|
+|`DYNAMIC_MACRO_SIZE`                      |128             |Sets the amount of memory that Dynamic Macros can use. This is a limited resource, dependent on the controller.  |
+|`DYNAMIC_MACRO_USER_CALL`                 |*Not defined*   |Defining this falls back to using the user `keymap.c` file to trigger the macro behavior.                        |
+|`DYNAMIC_MACRO_NO_NESTING`                |*Not Defined*   |Defining this disables the ability to call a macro from another macro (nested macros).                           |
+|`DYNAMIC_MACRO_DELAY`                     |*Not Defined*   |Sets the waiting time (ms unit) when sending each key.                                                           |
+|`DYNAMIC_MACRO_KEEP_ORIGINAL_LAYER_STATE` |*Not Defined*   |Defining this keeps the layer state when starting to record a macro                                              |
 
 
 If the LEDs start blinking during the recording with each keypress, it means there is no more space for the macro in the macro buffer. To fit the macro in, either make the other macro shorter (they share the same buffer) or increase the buffer size by adding the `DYNAMIC_MACRO_SIZE` define in your `config.h` (default value: 128; please read the comments for it in the header).

docs/features/haptic_feedback.md

@@ -121,7 +121,7 @@ Linear resonant actuators (LRA, also know as a linear vibrator) works different
 
 #### DRV2605L waveform library
 
-DRV2605L comes with preloaded library of various waveform sequences that can be called and played. If writing a macro, these waveforms can be played using `DRV_pulse(*sequence name or number*)`
+DRV2605L comes with preloaded library of various waveform sequences that can be called and played. If writing a macro, these waveforms can be played using `drv2605l_pulse(*sequence name or number*)` after adding `#include "drv2605l.h"`.
 
 List of waveform sequences from the datasheet:
 

docs/features/key_overrides.md

@@ -14,7 +14,7 @@ You can use key overrides in a similar way to momentary layer/fn keys to activat
 
 To enable this feature, you need to add `KEY_OVERRIDE_ENABLE = yes` to your `rules.mk`.
 
-Then, in your `keymap.c` file, you'll need to define the array `key_overrides`, which defines all key overrides to be used. Each override is a value of type `key_override_t`. The array `key_overrides`contains pointers to `key_override_t` values (`const key_override_t **`).
+Then, in your `keymap.c` file, you'll need to define the `key_overrides` config. See below for more details.
 
 ## Creating Key Overrides {#creating-key-overrides}
 
@@ -47,6 +47,17 @@ const key_override_t *key_overrides[] = {
 };
 ```
 
+This second example inverts or swaps semicolon and colon on ANSI and many other layouts.  That means pressing the key alone sends `shift` + `semicolon` giving `colon` (`S(KP_SCLN)` aka `KC_COLN`), but when pressing the key with shift, the shift modifier is suppressed (see `suppressed_mods` below), sending only `semicolon` (`KC_SCLN`):
+
+```c
+const key_override_t semicolon_colon_key_override = ko_make_basic(MOD_MASK_SHIFT, KC_COLN, KC_SCLN);
+
+// This globally defines all key overrides to be used
+const key_override_t *key_overrides[] = {
+    &semicolon_colon_key_override
+};
+```
+
 ## Intermediate Difficulty Examples {#intermediate-difficulty-examples}
 
 ### Media Controls & Screen Brightness {#media-controls-amp-screen-brightness}

docs/features/layer_lock.md

@@ -35,12 +35,12 @@ layer.
 
 Consider a keymap with the following base layer.
 
-![Base layer with a MO(NAV) key.](https://i.imgur.com/DkEhj9x.png)
+![Base layer with a MO(NAV) key.](/DkEhj9x.png)
 
 The highlighted key is a momentary layer switch `MO(NAV)`. Holding it accesses a
 navigation layer.
 
-![Nav layer with a Layer Lock key.](https://i.imgur.com/2wUZNWk.png)
+![Nav layer with a Layer Lock key.](/2wUZNWk.png)
 
 
 Holding the NAV key is fine for brief use, but awkward to continue holding when

docs/features/led_matrix.md

@@ -88,6 +88,8 @@ As mentioned earlier, the center of the keyboard by default is expected to be `{
 |`QK_LED_MATRIX_BRIGHTNESS_DOWN`|`LM_BRID`|Decrease the brightness level      |
 |`QK_LED_MATRIX_SPEED_UP`       |`LM_SPDU`|Increase the animation speed       |
 |`QK_LED_MATRIX_SPEED_DOWN`     |`LM_SPDD`|Decrease the animation speed       |
+|`QK_LED_MATRIX_FLAG_NEXT`      |`LM_FLGN`|Cycle through flags                |
+|`QK_LED_MATRIX_FLAG_PREVIOUS`  |`LM_FLGP`|Cycle through flags in reverse     |
 
 ## LED Matrix Effects {#led-matrix-effects}
 
@@ -253,6 +255,7 @@ const char* effect_name = led_matrix_get_mode_name(led_matrix_get_mode());
 #define LED_MATRIX_DEFAULT_FLAGS LED_FLAG_ALL // Sets the default LED flags, if none has been set
 #define LED_MATRIX_SPLIT { X, Y }   // (Optional) For split keyboards, the number of LEDs connected on each half. X = left, Y = Right.
                                     // If reactive effects are enabled, you also will want to enable SPLIT_TRANSPORT_MIRROR
+#define LED_MATRIX_FLAG_STEPS { LED_FLAG_ALL, LED_FLAG_KEYLIGHT | LED_FLAG_MODIFIER, LED_FLAG_NONE } // Sets the flags which can be cycled through.
 ```
 
 ## EEPROM storage {#eeprom-storage}
@@ -505,6 +508,62 @@ The current effect speed, from 0 to 255.
 
 ---
 
+### `void led_matrix_set_flags(led_flags_t flags)` {#api-led-matrix-set-flags}
+
+Set the global effect flags.
+
+#### Arguments {#api-led-matrix-set-flags-arguments}
+
+ - `led_flags_t flags`  
+   The [flags](#flags) value to set.
+
+---
+
+### `void led_matrix_set_flags_noeeprom(led_flags_t flags)` {#api-led-matrix-set-flags-noeeprom}
+
+Set the global effect flags. New state is not written to EEPROM.
+
+#### Arguments {#api-led-matrix-set-flags-noeeprom-arguments}
+
+ - `led_flags_t flags`  
+   The [flags](#flags) value to set.
+
+---
+
+### `void led_matrix_flags_step(void)` {#api-led-matrix-flags-step}
+
+Move to the next flag combination.
+
+---
+
+### `void led_matrix_flags_step_noeeprom(void)` {#api-led-matrix-flags-step-noeeprom}
+
+Move to the next flag combination. New state is not written to EEPROM.
+
+---
+
+### `void led_matrix_flags_step_reverse(void)` {#api-led-matrix-flags-step-reverse}
+
+Move to the previous flag combination.
+
+---
+
+### `void led_matrix_flags_step_reverse_noeeprom(void)` {#api-led-matrix-flags-step-reverse-noeeprom}
+
+Move to the previous flag combination. New state is not written to EEPROM.
+
+---
+
+### `uint8_t led_matrix_get_flags(void)` {#api-led-matrix-get-flags}
+
+Get the current global effect flags.
+
+#### Return Value {#api-led-matrix-get-flags-return}
+
+The current effect [flags](#flags).
+
+---
+
 ### `void led_matrix_reload_from_eeprom(void)` {#api-led-matrix-reload-from-eeprom}
 
 Reload the effect configuration (enabled, mode and brightness) from EEPROM.

docs/features/os_detection.md

@@ -136,12 +136,19 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) {
                 print_stored_setups();
             }
             return false;
+        default:
+            return true; // Process all other keycodes normally
     }
 }
 ```
 
-Then please open an issue on Github with this information and tell what OS was not detected correctly and if you have any intermediate devices between keyboard and your computer.
+Add both `STORE_SETUPS` and `PRINT_SETUPS` to your keyboard's keymap. Connect the keyboard to the device where the OS was not recognised, and press the `STORE_SETUPS` key to capture and store the fingerprint. On your development computer, run one of the suggested [console debugging tools](/faq_debug#debugging-tools), connect the keyboard, and press the `PRINT_SETUPS` key. The console should display multiple lines of data from the most recent `STORE_SETUPS` run.
 
+Open an issue on GitHub and paste the console output into the issue. Also tell us which OS (including the version, if possible) was not detected correctly and whether any intermediate devices, such as a USB hub, were used between the keyboard and the target device.
+
+::: tip
+If `STORE_SETUPS` has not been used previously, `PRINT_SETUPS` will report whatever values are already present in the controller's EEPROM. These may appear as random numbers.
+:::
 
 ## Credits
 

docs/features/pointing_device.md

@@ -267,6 +267,23 @@ The paw 3204 sensor uses a serial type protocol for communication, and requires
 
 The CPI range is 400-1600, with supported values of (400, 500, 600, 800, 1000, 1200 and 1600).  Defaults to 1000 CPI.
 
+### PAW-3222 Sensor
+
+To use the PAW-3222 sensor, add this to your `rules.mk`:
+
+```make
+POINTING_DEVICE_DRIVER = paw3222
+```
+
+The following pins must be defined in `config.h`:
+
+| Setting (`config.h`)  | Description                                                        | Default                      |
+| --------------------- | ------------------------------------------------------------------ | ---------------------------- |
+| `PAW3222_CS_PIN`      | (Required) The pin connected to the chip select pin of the sensor. | `POINTING_DEVICE_CS_PIN`     |
+| `PAW3222_SPI_DIVISOR` | (Required) The SPI clock divisor. This is dependent on your MCU.   | _not defined_                |
+
+The CPI range is up to 4,000. Defaults to 1,000 CPI.
+
 ### Pimoroni Trackball
 
 To use the Pimoroni Trackball module, add this to your `rules.mk`:

docs/features/rgb_matrix.md

@@ -96,6 +96,8 @@ As mentioned earlier, the center of the keyboard by default is expected to be `{
 |`QK_RGB_MATRIX_VALUE_DOWN`     |`RM_VALD`|Decrease the brightness level      |
 |`QK_RGB_MATRIX_SPEED_UP`       |`RM_SPDU`|Increase the animation speed       |
 |`QK_RGB_MATRIX_SPEED_DOWN`     |`RM_SPDD`|Decrease the animation speed       |
+|`QK_RGB_MATRIX_FLAG_NEXT`      |`RM_FLGN`|Cycle through flags                |
+|`QK_RGB_MATRIX_FLAG_PREVIOUS`  |`RM_FLGP`|Cycle through flags in reverse     |
 
 ## RGB Matrix Effects {#rgb-matrix-effects}
 
@@ -409,6 +411,7 @@ const char* effect_name = rgb_matrix_get_mode_name(rgb_matrix_get_mode());
 #define RGB_MATRIX_SPLIT { X, Y } // (Optional) For split keyboards, the number of LEDs connected on each half. X = left, Y = Right.
                                   // If reactive effects are enabled, you also will want to enable SPLIT_TRANSPORT_MIRROR
 #define RGB_TRIGGER_ON_KEYDOWN      // Triggers RGB keypress events on key down. This makes RGB control feel more responsive. This may cause RGB to not function properly on some boards
+#define RGB_MATRIX_FLAG_STEPS { LED_FLAG_ALL, LED_FLAG_KEYLIGHT | LED_FLAG_MODIFIER, LED_FLAG_UNDERGLOW, LED_FLAG_NONE } // Sets the flags which can be cycled through.
 ```
 
 ## EEPROM storage {#eeprom-storage}
@@ -852,6 +855,62 @@ The current effect speed, from 0 to 255.
 
 ---
 
+### `void rgb_matrix_set_flags(led_flags_t flags)` {#api-rgb-matrix-set-flags}
+
+Set the global effect flags.
+
+#### Arguments {#api-rgb-matrix-set-flags-arguments}
+
+ - `led_flags_t flags`  
+   The [flags](#flags) value to set.
+
+---
+
+### `void rgb_matrix_set_flags_noeeprom(led_flags_t flags)` {#api-rgb-matrix-set-flags-noeeprom}
+
+Set the global effect flags. New state is not written to EEPROM.
+
+#### Arguments {#api-rgb-matrix-set-flags-noeeprom-arguments}
+
+ - `led_flags_t flags`  
+   The [flags](#flags) value to set.
+
+---
+
+### `void rgb_matrix_flags_step(void)` {#api-rgb-matrix-flags-step}
+
+Move to the next flag combination.
+
+---
+
+### `void rgb_matrix_flags_step_noeeprom(void)` {#api-rgb-matrix-flags-step-noeeprom}
+
+Move to the next flag combination. New state is not written to EEPROM.
+
+---
+
+### `void rgb_matrix_flags_step_reverse(void)` {#api-rgb-matrix-flags-step-reverse}
+
+Move to the previous flag combination.
+
+---
+
+### `void rgb_matrix_flags_step_reverse_noeeprom(void)` {#api-rgb-matrix-flags-step-reverse-noeeprom}
+
+Move to the previous flag combination. New state is not written to EEPROM.
+
+---
+
+### `uint8_t rgb_matrix_get_flags(void)` {#api-rgb-matrix-get-flags}
+
+Get the current global effect flags.
+
+#### Return Value {#api-rgb-matrix-get-flags-return}
+
+The current effect [flags](#flags).
+
+---
+
 ### `void rgb_matrix_sethsv(uint8_t h, uint8_t s, uint8_t v)` {#api-rgb-matrix-sethsv}
 
 Set the global effect hue, saturation, and value (brightness).

docs/features/rgblight.md

@@ -55,7 +55,7 @@ Changing the **Hue** cycles around the circle.<br>
 Changing the **Saturation** moves between the inner and outer sections of the wheel, affecting the intensity of the color.<br>
 Changing the **Value** sets the overall brightness.<br>
 
-![QMK Color Wheel with HSV Values](https://i.imgur.com/vkYVo66.jpg)
+![QMK Color Wheel with HSV Values](/vkYVo66.jpg)
 
 ## Keycodes
 

docs/features/split_keyboard.md

@@ -91,11 +91,11 @@ SPLIT_TRANSPORT = custom
 
 Configuring your layout in a split keyboard works slightly differently to a non-split keyboard. Take for example the following layout. The top left numbers refer to the matrix row and column, and the bottom right are the order of the keys in the layout:
 
-![Physical layout](https://i.imgur.com/QeY6kMQ.png)
+![Physical layout](/QeY6kMQ.png)
 
 Since the matrix scanning procedure operates on entire rows, it first populates the left half's rows, then the right half's. Thus, the matrix as QMK views it has double the rows instead of double the columns:
 
-![Matrix](https://i.imgur.com/4wjJzBU.png)
+![Matrix](/4wjJzBU.png)
 
 ### Setting Handedness
 
@@ -497,7 +497,7 @@ Once you have done that, you will want to solder the diode from the 5V pad to th
 
 You may need to use the 5V pad from the regulator block above as the pads were too small and placed too closely together to place the Schottky diode properly.
 
-![Teensy++ 2.0](https://i.imgur.com/BPEC5n5.png)
+![Teensy++ 2.0](/BPEC5n5.jpg)
 
 ## Additional Resources
 

docs/features/tap_dance.md

@@ -40,6 +40,10 @@ Similar to the first option, the second and third option are good for simple lay
 
 For more complicated cases, like blink the LEDs, fiddle with the backlighting, and so on, use the fourth or fifth option. Examples of each are listed below.
 
+::: tip 
+If too many tap dances are active at the same time, later ones won't have any effect. You need to increase `TAP_DANCE_MAX_SIMULTANEOUS` by adding `#define TAP_DANCE_MAX_SIMULTANEOUS 5` (or higher) to your keymap's `config.h` file if you expect that users may hold down many tap dance keys simultaneously. By default, only 3 tap dance keys can be used together at the same time.
+:::
+
 ## Implementation Details {#implementation}
 
 Well, that's the bulk of it! You should now be able to work through the examples below, and to develop your own Tap Dance functionality. But if you want a deeper understanding of what's going on behind the scenes, then read on for the explanation of how it all works!
@@ -209,11 +213,13 @@ tap_dance_action_t tap_dance_actions[] = {
 
 bool process_record_user(uint16_t keycode, keyrecord_t *record) {
     tap_dance_action_t *action;
+    tap_dance_state_t* state;
 
     switch (keycode) {
-        case TD(CT_CLN): // list all tap dance keycodes with tap-hold configurations
-            action = &tap_dance_actions[QK_TAP_DANCE_GET_INDEX(keycode)];
-            if (!record->event.pressed && action->state.count && !action->state.finished) {
+        case TD(CT_CLN):
+            action = tap_dance_get(QK_TAP_DANCE_GET_INDEX(keycode));
+            state = tap_dance_get_state(QK_TAP_DANCE_GET_INDEX(keycode));
+            if (!record->event.pressed && state != NULL && state->count && !state->finished) {
                 tap_dance_tap_hold_t *tap_hold = (tap_dance_tap_hold_t *)action->user_data;
                 tap_code16(tap_hold->tap);
             }

docs/flashing.md

@@ -217,8 +217,8 @@ To generate this bootloader, use the `bootloader` target, eg. `make planck/rev4:
 
 Compatible flashers:
 
-* TBD
-  * Currently, you need to either use the [Python script](https://github.com/qmk/lufa/tree/master/Bootloaders/HID/HostLoaderApp_python), or compile [`hid_bootloader_cli`](https://github.com/qmk/lufa/tree/master/Bootloaders/HID/HostLoaderApp), from the LUFA repo. Homebrew may (will) have support for this directly (via `brew install qmk/qmk/hid_bootloader_cli`).
+* [QMK Toolbox](https://github.com/qmk/qmk_toolbox/releases) (recommended GUI)
+* [hid_bootloader_cli](https://github.com/qmk/lufa/tree/master/Bootloaders/HID/HostLoaderApp) / `:qmk-hid` target in QMK (recommended command line)
 
 Flashing sequence:
 

docs/getting_started_github.md

@@ -8,15 +8,15 @@ This guide assumes you're somewhat comfortable with running things at the comman
 
 Start on the [QMK GitHub page](https://github.com/qmk/qmk_firmware), and you'll see a button in the upper right that says "Fork":
 
-![Fork on GitHub](https://i.imgur.com/8Toomz4.jpg)
+![Fork on GitHub](/8Toomz4.jpg)
 
 If you're a part of an organization, you'll need to choose which account to fork it to. In most circumstances, you'll want to fork it to your personal account. Once your fork is completed (sometimes this takes a little while), click the "Clone or Download" button:
 
-![Download from GitHub](https://i.imgur.com/N1NYcSz.jpg)
+![Download from GitHub](/N1NYcSz.jpg)
 
 And be sure to select "HTTPS", and select the link and copy it:
 
-![HTTPS link](https://i.imgur.com/eGO0ohO.jpg)
+![HTTPS link](/eGO0ohO.jpg)
 
 From here, enter `git clone --recurse-submodules ` into the command line, and then paste your link:
 
@@ -57,10 +57,10 @@ To https://github.com/whoeveryouare/qmk_firmware.git
 
 Your changes now exist on your fork on GitHub - if you go back there (`https://github.com/<whoeveryouare>/qmk_firmware`), you can create a "New Pull Request" by clicking this button:
 
-![New Pull Request](https://i.imgur.com/DxMHpJ8.jpg)
+![New Pull Request](/DxMHpJ8.jpg)
 
 Here you'll be able to see exactly what you've committed - if it all looks good, you can finalize it by clicking "Create Pull Request":
 
-![Create Pull Request](https://i.imgur.com/Ojydlaj.jpg)
+![Create Pull Request](/Ojydlaj.jpg)
 
 After submitting, we may talk to you about your changes, ask that you make changes, and eventually accept it! Thanks for contributing to QMK :)

docs/hand_wire.md

@@ -36,12 +36,12 @@ What you want to achieve is one leg from each switch being attached to the corre
 
 It is fairly simple to plan for an ortholinear keyboard (like a Planck).
 
-![Example Planck matrix](https://i.imgur.com/FRShcLD.png)
+![Example Planck matrix](/FRShcLD.png)
 Image from [RoastPotatoes' "How to hand wire a Planck"](https://blog.roastpotatoes.co/guide/2015/11/04/how-to-handwire-a-planck/)
 
 But the larger and more complicated your keyboard, the more complex the matrix.  [Keyboard Firmware Builder](https://kbfirmware.com/) can help you plan your matrix layout (shown here with a basic fullsize ISO keyboard imported from [Keyboard Layout Editor](https://www.keyboard-layout-editor.com).
 
-![Example ISO matrix](https://i.imgur.com/UlJ4ZDP.png)
+![Example ISO matrix](/UlJ4ZDP.png)
 
 Bear in mind that the number of rows plus the number of columns can not exceed the number of I/O pins on your controller.  So the fullsize matrix shown above would be possible on a Proton C or Teensy++, but not on a regular Teensy or Pro Micro.
 
@@ -51,14 +51,14 @@ Bear in mind that the number of rows plus the number of columns can not exceed t
 | :------------ |:-------------:| ------:| ------ |
 | Pro Micro*    | ATmega32u4    |     20 | [link](https://learn.sparkfun.com/tutorials/pro-micro--fio-v3-hookup-guide/hardware-overview-pro-micro#Teensy++_2.0)       |
 | Teensy 2.0    | ATmega32u4    |     25 | [link](https://www.pjrc.com/teensy/pinout.html)       |
-| [QMK Proton C](https://qmk.fm/proton-c/)      | STM32F303xC   |     36 | [link 1](https://i.imgur.com/RhtrAlc.png), [2](https://deskthority.net/wiki/QMK_Proton_C)       |
+| [QMK Proton C](https://qmk.fm/proton-c/)      | STM32F303xC   |     36 | [link 1](https://qmk.fm/proton-c-pinout.jpg), [2](https://deskthority.net/wiki/QMK_Proton_C)       |
 | Teensy++ 2.0  | AT90USB1286   |     46 | [link](https://www.pjrc.com/teensy/pinout.html#Teensy_2.0)       |
 
 *Elite C is essentially the same as a Pro Micro with a USB-C instead of Micro-USB
 
 There are also a number of boards designed specifically for handwiring that mount directly to a small number of switches and offer pinouts for the rest.  Though these are generally more expensive and may be more difficult to get hold of.
 
-<img src="https://i.imgur.com/QiA3ta6.jpg" alt="Postage board mini mounted in place" width="500"/>
+<img src="/QiA3ta6.jpg" alt="Postage board mini mounted in place" width="500"/>
 
 | Board         | Controller    | # I/O  |
 | :------------ |:-------------:| ------:|
@@ -74,13 +74,13 @@ Established materials and techniques include:
 
 | Technique     | Examples | Pros | Cons | Image
 | :-----------| :------- | :------ | :--- | :---
-| Lengths of wire with stripped segments | [Sasha Solomon's Dactyl](https://medium.com/@sachee/building-my-first-keyboard-and-you-can-too-512c0f8a4c5f) and [Cribbit's modern hand wire](https://geekhack.org/index.php?topic=87689.0) | Neat and tidy | Some effort in stripping the wire | ![Stripped wire](https://i.imgur.com/0GNIYY0.jpg)
-| Short lengths of wire | [u/xicolinguada's ortho build](https://www.reddit.com/r/MechanicalKeyboards/comments/c39k4f/my_first_hand_wired_keyboard_its_not_perfect_but/) | Easier to strip the wire | More difficult to place | ![individual wire lengths](https://i.imgur.com/mBe5vkL.jpg)
-| Magnet/Enamelled wire | [fknraiden's custom board](https://geekhack.org/index.php?topic=74223.0) | Can be directly soldered onto (insulation burns off with heat) | Appearance? | ![Magnet wire](https://i.imgur.com/b4b7KDb.jpg)
-| Bending the legs of the diodes for the rows | [Matt3o's Brownfox](https://deskthority.net/viewtopic.php?f=7&t=6050) | Fewer solder joints required | Uninsulated | ![Bent diode legs](https://i.imgur.com/aTnG8TV.jpg)
-| Using rigid wiring (e.g. brass tube) | [u/d_stilgar's invisible hardline](https://www.reddit.com/r/MechanicalKeyboards/comments/8aw5j2/invisible_hardline_keyboard_progress_update_april/) and [u/jonasfasler's first attempt](https://www.reddit.com/r/MechanicalKeyboards/comments/de1jyv/my_first_attempt_at_handwiring_a_keyboard/) | Very pretty | More difficult. No physical insulation | ![Hardline hand wire](https://i.imgur.com/CnASmPo.jpg)
-| Bare wire with insulation added after (e.g. kapton tape) | [Matt3o's 65% on his website](https://matt3o.com/hand-wiring-a-custom-keyboard/) | Easier (no wire stripping required) | Not as attractive | ![Bare wire](https://i.imgur.com/AvXZShD.jpg)
-| Copper tape | [ManuForm Dactyl](https://github.com/tshort/dactyl-keyboard) | Very easy | Only really works when your plate/case aligns with the bottom of your switches | ![Copper tape](https://i.imgur.com/RFyNMlL.jpg)
+| Lengths of wire with stripped segments | [Sasha Solomon's Dactyl](https://medium.com/@sachee/building-my-first-keyboard-and-you-can-too-512c0f8a4c5f) and [Cribbit's modern hand wire](https://geekhack.org/index.php?topic=87689.0) | Neat and tidy | Some effort in stripping the wire | ![Stripped wire](/0GNIYY0.jpg)
+| Short lengths of wire | [u/xicolinguada's ortho build](https://www.reddit.com/r/MechanicalKeyboards/comments/c39k4f/my_first_hand_wired_keyboard_its_not_perfect_but/) | Easier to strip the wire | More difficult to place | ![individual wire lengths](/mBe5vkL.jpg)
+| Magnet/Enamelled wire | [fknraiden's custom board](https://geekhack.org/index.php?topic=74223.0) | Can be directly soldered onto (insulation burns off with heat) | Appearance? | ![Magnet wire](/b4b7KDb.jpg)
+| Bending the legs of the diodes for the rows | [Matt3o's Brownfox](https://deskthority.net/viewtopic.php?f=7&t=6050) | Fewer solder joints required | Uninsulated | ![Bent diode legs](/aTnG8TV.jpg)
+| Using rigid wiring (e.g. brass tube) | [u/d_stilgar's invisible hardline](https://www.reddit.com/r/MechanicalKeyboards/comments/8aw5j2/invisible_hardline_keyboard_progress_update_april/) and [u/jonasfasler's first attempt](https://www.reddit.com/r/MechanicalKeyboards/comments/de1jyv/my_first_attempt_at_handwiring_a_keyboard/) | Very pretty | More difficult. No physical insulation | ![Hardline hand wire](/CnASmPo.jpg)
+| Bare wire with insulation added after (e.g. kapton tape) | [Matt3o's 65% on his website](https://matt3o.com/hand-wiring-a-custom-keyboard/) | Easier (no wire stripping required) | Not as attractive | ![Bare wire](/AvXZShD.jpg)
+| Copper tape | [ManuForm Dactyl](https://github.com/tshort/dactyl-keyboard) | Very easy | Only really works when your plate/case aligns with the bottom of your switches | ![Copper tape](/RFyNMlL.jpg)
 
 
 Note that these methods can be combined.  Prepare your lengths of wire before moving on to soldering.
@@ -97,11 +97,11 @@ There are a lot of soldering guides and tips available elsewhere but here are so
 
 To ensure a strong solder joint you want a good amount of contact between the solder and the two pieces of metal you are connecting. A good way of doing this (though not required) is looping around pins or twisting wires together before applying solder.
 
-<img src="https://i.imgur.com/eHJjmnU.jpg" alt="Looped around rod" width="200"/> <img src="https://i.imgur.com/8nbxmmr.jpg?1" alt="Looped diode leg" width="200"/>
+<img src="/eHJjmnU.jpg" alt="Looped around rod" width="400"/>
 
 If your diodes are on a packaging strip and need a bend in them (either the start of a loop or for connecting to its neighbour) this can easily done by bending it over something straight like the edge of a box, table, or ruler.  This also helps keep track of the direction of the diode as all the bends will be on the same side.
 
-<img src="https://i.imgur.com/oITudbX.jpg" alt="Bent diode legs" width="200"/>
+<img src="/oITudbX.jpg" alt="Bent diode legs" width="400"/>
 
 If your iron has temperature control, set it to 315ºC (600ºF).
 
@@ -164,7 +164,7 @@ Cut wires to the length of the distance from the a point on each column/row to t
 
 Ribbon cable can be used to keep this extra tidy.  You may also want to consider routing the wires beneath the existing columns/rows.
 
-<img src="https://i.imgur.com/z2QlKfB.jpg" alt="Ribbon Cable" width="350"/>
+<img src="/z2QlKfB.jpg" alt="Ribbon Cable" width="600"/>
 
 As you solder the wires to the controller make a note of which row/column is going to which pin on the controller as we'll use this data to setup the matrix when we create the firmware.
 

docs/isp_flashing_guide.md

@@ -220,14 +220,18 @@ This bootloader is primarily for keyboards originally designed for the PS2AVRGB
 
 USBaspLoader is a bootloader based on V-USB that emulates a hardware USBasp device. It runs on ATmega32A and ATmega328P MCUs.
 
-Precompiled `.hex` files are generally not available, but you can compile it yourself by setting up the QMK environment and following Coseyfannitutti's guide for the appropriate MCU:
+Precompiled `.hex` files are generally not available, but you can compile it yourself by setting up the QMK environment and cloning the appropriate branch of Coseyfannitutti's USBaspLoader fork:
 
-|MCU                                                                                  |Low   |High  |Extended|USB ID     |
-|-------------------------------------------------------------------------------------|------|------|--------|-----------|
-|[ATmega32A](https://github.com/coseyfannitutti/discipline/tree/master/doc/bootloader)|`0x1F`|`0xC0`|*n/a*   |`16C0:05DC`|
-|[ATmega328P](https://github.com/coseyfannitutti/discipad/tree/master/doc/bootloader) |`0xD7`|`0xD0`|`0x04`  |`16C0:05DC`|
+|MCU                                                                          |Low   |High  |Extended|USB ID     |
+|-----------------------------------------------------------------------------|------|------|--------|-----------|
+|[ATmega32A](https://github.com/coseyfannitutti/USBaspLoader/tree/atmega32a)  |`0x1F`|`0xC0`|*n/a*   |`16C0:05DC`|
+|[ATmega328P](https://github.com/coseyfannitutti/USBaspLoader/tree/atmega328p)|`0xD7`|`0xD0`|`0x04`  |`16C0:05DC`|
 
-Note that some boards may have their own specialized build of this bootloader in a separate repository. This will usually be linked to in the board's readme.
+From there, simply `cd` to the `firmware/` directory and run `make`, which should produce a file called `main.hex`.
+
+:::tip
+Some boards may have their own specialized build of this bootloader in a separate repository. This will usually be linked to in the board's readme.
+:::
 
 ## Flashing the Bootloader
 

docs/keycodes.md

@@ -433,6 +433,8 @@ See also: [LED Matrix](features/led_matrix)
 |`QK_LED_MATRIX_BRIGHTNESS_DOWN`|`LM_BRID`|Decrease the brightness level      |
 |`QK_LED_MATRIX_SPEED_UP`       |`LM_SPDU`|Increase the animation speed       |
 |`QK_LED_MATRIX_SPEED_DOWN`     |`LM_SPDD`|Decrease the animation speed       |
+|`QK_LED_MATRIX_FLAG_NEXT`      |`LM_FLGN`|Cycle through flags                |
+|`QK_LED_MATRIX_FLAG_PREVIOUS`  |`LM_FLGP`|Cycle through flags in reverse     |
 
 ## Magic Keycodes {#magic-keycodes}
 
@@ -783,6 +785,8 @@ See also: [RGB Matrix](features/rgb_matrix)
 |`QK_RGB_MATRIX_VALUE_DOWN`     |`RM_VALD`|Decrease the brightness level      |
 |`QK_RGB_MATRIX_SPEED_UP`       |`RM_SPDU`|Increase the animation speed       |
 |`QK_RGB_MATRIX_SPEED_DOWN`     |`RM_SPDD`|Decrease the animation speed       |
+|`QK_RGB_MATRIX_FLAG_NEXT`      |`RM_FLGN`|Cycle through flags                |
+|`QK_RGB_MATRIX_FLAG_PREVIOUS`  |`RM_FLGP`|Cycle through flags in reverse     |
 
 ## US ANSI Shifted Symbols {#us-ansi-shifted-symbols}
 

docs/license_violations.md

@@ -33,11 +33,13 @@ If you own a board from one of the following vendors already, consider asking th
 | iLovBee                      | Official 30-day copyright source code request issued Sep 11 2024 due to deception on PR, no response received. Ambiguity on PRs -- marketing says wireless, PR author said wired-only, then included wireless code anyway. Seemingly intentionally deceptive.                                                                       |
 | KiiBOOM                      | Seems to use the same OEM as Epomaker, same problems.                                                                                                                                                                                                                                                                               |
 | kprepublic                   | Makes no attempt to release source code, all boards in QMK are reverse-engineered, created, and supported by the community. New board variants magically appear without telling customers they're incompatible with existing QMK versions, in some cases bricking boards or requiring ISP flashing.                                 |
+| Lofree                       | Selling tri-mode boards based on QMK without sources, just `via.json` provided.                                                                                                                                                                                                                                                     |
 | Luminkey                     | Selling tri-mode boards based on QMK without sources, just `via.json` provided.                                                                                                                                                                                                                                                     |
 | Meletrix                     | Selling tri-mode boards based on QMK without sources, just `via.json` provided.                                                                                                                                                                                                                                                     |
 | mmd / Smartmmd / i-game.tech | Ambiguity on PRs -- marketing says wireless, PR author said wired-only, then included wireless code anyway. Seemingly intentionally deceptive.                                                                                                                                                                                      |
 | MyKeyClub                    | Community-supported JRIS75, vendor was contacted by community members and refused to cooperate.                                                                                                                                                                                                                                     |
 | owlab                        | Selling wired based on QMK without sources, just `via.json` provided. Ambiguous as to whether or not wireless firmware is based on QMK, given that their configuration tool looks very similar to VIA.                                                                                                                              |
+| PMO Lab                      | Selling tri-mode boards based on QMK without sources, just `via.json` provided.                                                                                                                                                                                                                                                     |
 | pressplayid                  | Selling wired and tri-mode boards based on QMK without sources, just `via.json` provided                                                                                                                                                                                                                                            |
 | qwertykeys                   | Selling wired and tri-mode boards based on QMK without sources, just `via.json` provided.                                                                                                                                                                                                                                           |
 | Redragon                     | Selling tri-mode boards based on QMK without sources, attempted upstreaming crippled firmware without wireless.                                                                                                                                                                                                                     |

docs/newbs_building_firmware_configurator.md

@@ -1,6 +1,6 @@
 # QMK Configurator
 
-[![QMK Configurator Screenshot](https://i.imgur.com/anw9cOL.png)](https://config.qmk.fm/)
+[![QMK Configurator Screenshot](/anw9cOL.png)](https://config.qmk.fm/)
 
 The [QMK Configurator](https://config.qmk.fm) is an online graphical user interface that generates QMK Firmware `.hex` or `.bin` files.
 

docs/newbs_external_userspace.md

@@ -32,11 +32,11 @@ Building locally has a much shorter turnaround time than waiting for GitHub Acti
 
 A basic skeleton External Userspace repository can be found [here](https://github.com/qmk/qmk_userspace). If you wish to keep your keymaps on GitHub (strongly recommended!), you can fork the repository and use it as a base:
 
-![Userspace Fork](https://i.imgur.com/hcegguh.png)
+![Userspace Fork](/hcegguh.png)
 
 Going ahead with your fork will copy it to your account, at which point you can clone it to your local machine and begin adding your keymaps:
 
-![Userspace Clone](https://i.imgur.com/CWYmsk8.png)
+![Userspace Clone](/CWYmsk8.png)
 
 ```sh
 cd $HOME
@@ -99,8 +99,8 @@ All firmware builds you've added to the External Userspace build targets will be
 
 GitHub Actions can be used to automatically build your keymaps whenever you push changes to your External Userspace repository. If you have set up your list of build targets, this is as simple as enabling workflows in the GitHub repository settings:
 
-![Repo Settings](https://i.imgur.com/EVkxOt1.png)
+![Repo Settings](/EVkxOt1.png)
 
 Any push will result in compilation of all configured builds, and once completed a new release containing the newly-minted firmware files will be created on GitHub, which you can subsequently download and flash to your keyboard:
 
-![Releases](https://i.imgur.com/zmwOL5P.png)
+![Releases](/zmwOL5P.png)

docs/newbs_getting_started.md

@@ -50,90 +50,64 @@ You will need to install [MSYS2](https://www.msys2.org). Once installed, close a
 Install the QMK CLI by running:
 
 ```sh
-pacman --needed --noconfirm --disable-download-timeout -S git mingw-w64-x86_64-python-qmk
+curl -fsSL https://install.qmk.fm | sh
 ```
 
 ::::
 
 ==== macOS
 
-QMK maintains a Homebrew tap and formula which will automatically install the CLI and all necessary dependencies.
-
 #### Prerequisites
 
 You will need to install Homebrew. Follow the instructions on https://brew.sh.
 
-::: tip
-If you are using an Apple Silicon machine, the installation process will take significantly longer because GitHub actions do not have native runners to build binary packages for the ARM and AVR toolchains.
-:::
-
 #### Installation
 
 Install the QMK CLI by running:
 
 ```sh
-brew install qmk/qmk/qmk
+curl -fsSL https://install.qmk.fm | sh
 ```
 
 ==== Linux/WSL
 
+#### Installation
+
+::: info
+Many Linux distributions are supported, but not all. Mainstream distributions will have best success -- if possible, choose either Debian or its derivatives (such as Ubuntu, or Mint), CentOS or its derivatives (such as Fedora, or Rocky Linux), and Arch or its derivatives (such as Manjaro, or CachyOS).
+:::
+
+Install the QMK CLI by running:
+
+```sh
+curl -fsSL https://install.qmk.fm | sh
+```
+
 ::: tip
 **Note for WSL users**: By default, the installation process will clone the QMK repository into your WSL home directory, but if you have cloned manually, ensure that it is located inside the WSL instance instead of the Windows filesystem (ie. not in `/mnt`), as accessing it is currently [extremely slow](https://github.com/microsoft/WSL/issues/4197).
 :::
 
-#### Prerequisites
-
-You will need to install Git and Python. It's very likely that you already have both, but if not, one of the following commands should install them:
-
-* Debian / Ubuntu / Devuan: `sudo apt install -y git python3-pip`
-* Fedora / Red Hat / CentOS: `sudo yum -y install git python3-pip`
-* Arch / Manjaro: `sudo pacman --needed --noconfirm -S git python-pip libffi`
-* Void: `sudo xbps-install -y git python3-pip`
-* Solus: `sudo eopkg -y install git python3`
-* Sabayon: `sudo equo install dev-vcs/git dev-python/pip`
-* Gentoo: `sudo emerge dev-vcs/git dev-python/pip`
-
-#### Installation
-
-Install the QMK CLI by running:
-
-```sh
-python3 -m pip install --user qmk
-```
-
-Alternatively, install the QMK CLI as a [uv](https://docs.astral.sh/uv/) managed tool, kept isolated in a virtual environment (requires uv to be installed):
-
-```sh
-uv tool install qmk
-```
-
-#### Community Packages
-
-These packages are maintained by community members, so may not be up to date or completely functional. If you encounter problems, please report them to their respective maintainers.
-
-On Arch-based distros you can install the CLI from the official repositories (NOTE: at the time of writing this package marks some dependencies as optional that should not be):
-
-```sh
-sudo pacman -S qmk
-```
-
-You can also try the `qmk-git` package from AUR:
-
-```sh
-yay -S qmk-git
-```
+::: warning
+Any QMK packages provided by your distribution's package manager are almost certainly out of date. It is strongly suggested the installation script above is used instead.
+:::
 
 ==== FreeBSD
 
 #### Installation
 
+::: warning
+FreeBSD support is provided on a best-effort basis by the community instead of the QMK maintainers. It is strongly suggested that you use either Windows, macOS, or a supported distribution of Linux instead.
+:::
+
 Install the FreeBSD package for QMK CLI by running:
 
 ```sh
 pkg install -g "py*-qmk"
 ```
 
-NOTE: remember to follow the instructions printed at the end of installation (use `pkg info -Dg "py*-qmk"` to show them again).
+::: info NOTE
+Remember to follow the instructions printed at the end of installation (use `pkg info -Dg "py*-qmk"` to show them again).
+:::
 
 :::::
 

docs/other_eclipse.md

@@ -66,7 +66,7 @@ Once both plugins are installed, restart Eclipse as prompted.
   * Select the _AVR-GCC Toolchain_;
   * Keep the rest as-is and click <kbd>Finish</kbd>
 
-  ![Importing QMK in Eclipse](https://i.imgur.com/oHYR1yW.png)
+  ![Importing QMK in Eclipse](/oHYR1yW.png)
 
 3. The project will now be loaded and indexed. Its files can be browsed easily through the _Project Explorer_ on the left.
 

docs/other_vscode.md

@@ -174,7 +174,7 @@ You'll need to perform some modifications to the file above in order to target y
 * `"armToolchainPath"`: _[Optional]_ The path to the ARM toolchain installation location on Windows -- under normal circumstances Linux/macOS will auto-detect this correctly and will not need to be specified. 
 
 ::: warning
-Windows builds of QMK Firmware are generally compiled using QMK MSYS, and the path to gdb's location (`C:\\QMK_MSYS\\mingw64\\bin`) needs to be specified under `armToolchainPath` for it to be detected. You may also need to change the GDB path to point at `C:\\QMK_MSYS\\mingw64\\bin\\gdb-multiarch.exe` in the VSCode Cortex-Debug user settings: ![VSCode Settings](https://i.imgur.com/EGrPM1L.png)
+Windows builds of QMK Firmware are generally compiled using QMK MSYS, and the path to gdb's location (`C:\\QMK_MSYS\\mingw64\\bin`) needs to be specified under `armToolchainPath` for it to be detected. You may also need to change the GDB path to point at `C:\\QMK_MSYS\\mingw64\\bin\\gdb-multiarch.exe` in the VSCode Cortex-Debug user settings: ![VSCode Settings](/EGrPM1L.png)
 :::
 
 The following modifications must be made to the keyboard's `rules.mk` file to enable debug information and disable optimisations -- this will ensure breakpoints and variable viewing works correctly:

docs/platformdev_blackpill_f4x1.md

@@ -7,7 +7,7 @@ The WeAct Blackpill is a popular choice for handwired boards, as it offers a pow
 * [WeAct GitHub for F4x1 Blackpill](https://github.com/WeActStudio/WeActStudio.MiniSTM32F4x1)
   * Unfortunately, due to supply issues official WeAct F411 based blackpills may not be available.
 
-![Blackpill F411](https://i.imgur.com/nCgeolTh.png)
+![Blackpill F411](/nCgeolTh.png)
 
 
 ## Pin Usage Limitations

docs/platformdev_proton_c.md

@@ -2,7 +2,7 @@
 
 The Proton C is an Arm STM32F303xC based drop-in replacement for the Pro Micro.
 
-<img src="https://i.imgur.com/GdsN1Rdh.jpg" alt="Proton C" />
+<img src="https://qmk.fm/proton-c.jpg" alt="Proton C" width="800"/>
 
 #### Features