Added check for event pressed to clear space cadet (#5839 )

* Added check for pressed to clear space cadet * Found some docs to update * Update docs/quantum_keycodes.md Co-Authored-By: fauxpark <fauxpark@gmail.com> * Changes from PR
[Keyboard] Z-150 Blackheart refactor (#5823 )
2019-05-11 22:20:14 -07:00 · 2019-05-11 22:16:07 -07:00 · 2019-05-11 18:12:06 -07:00 · 2019-05-11 17:55:12 -07:00 · 2019-05-11 17:51:37 -07:00 · 2019-05-11 12:31:31 -07:00
49 changed files with 2067 additions and 151 deletions
--- a/4
+++ b/4
@@ -7,6 +7,8 @@ Vagrant.configure(2) do |config|

  # VMware/Virtualbox ( and also Hyperv/Parallels) 64 bit
  config.vm.box = "generic/debian9"
+  
+  config.vm.synced_folder '.', '/vagrant'

  # This section allows you to customize the Virtualbox VM
  # settings, ie showing the GUI or upping the memory
@@ -64,7 +66,7 @@ Vagrant.configure(2) do |config|
  # If this causes issues you can run a 'vagrant destroy' and then
  # add a # before ,run: (or change "always" to "once") and run 'vagrant up' to get a working
  # non-updated box and then attempt to troubleshoot or open a Github issue
-  config.vm.provision "shell", inline: "/bin/sh -c 'yes | /vagrant/util/qmk_install.sh'", run: "always"
+  config.vm.provision "shell", inline: "/vagrant/util/qmk_install.sh", run: "always"

  config.vm.post_up_message = <<-EOT

--- a/docs/feature_space_cadet.md
+++ b/docs/feature_space_cadet.md
@@ -20,7 +20,7 @@ Firstly, in your keymap, do one of the following:
 |`KC_RCPC`  |Right Control when held, `)` when tapped   |
 |`KC_LAPO`  |Left Alt when held, `(` when tapped        |
 |`KC_RAPC`  |Right Alt when held, `)` when tapped       |
-|`KC_SFTENT`|Right Shift when held, `Enter` when tapped |
+|`KC_SFTENT`|Right Shift when held, Enter when tapped   |

 ## Caveats

@@ -38,10 +38,10 @@ By default Space Cadet assumes a US ANSI layout, but if your layout uses differe
 |----------------|-------------------------------|---------------------------------------------------------------------------------|
 |`LSPO_KEYS`     |`KC_LSFT, LSPO_MOD, LSPO_KEY`  |Send `KC_LSFT` when held, the mod and  key defined by `LSPO_MOD` and `LSPO_KEY`. |
 |`RSPC_KEYS`     |`KC_RSFT, RSPC_MOD, RSPC_KEY`  |Send `KC_RSFT` when held, the mod and  key defined by `RSPC_MOD` and `RSPC_KEY`. |
-|`LCPO_KEYS`     |`KC_LCTL, KC_LCTL, KC_9`       |Send `KC_LCTL` when held, the mod `KC_LCTL` with the key `KC_9` when tapped.     |
-|`RCPC_KEYS`     |`KC_RCTL, KC_RCTL, KC_0`       |Send `KC_RCTL` when held, the mod `KC_RCTL` with the key `KC_0` when tapped.     |
-|`LAPO_KEYS`     |`KC_LALT, KC_LALT, KC_9`       |Send `KC_LALT` when held, the mod `KC_LALT` with the key `KC_9` when tapped.     |
-|`RAPC_KEYS`     |`KC_RALT, KC_RALT, KC_0`       |Send `KC_RALT` when held, the mod `KC_RALT` with the key `KC_0` when tapped.     |
+|`LCPO_KEYS`     |`KC_LCTL, KC_LSFT, KC_9`       |Send `KC_LCTL` when held, the mod `KC_LSFT` with the key `KC_9` when tapped.     |
+|`RCPC_KEYS`     |`KC_RCTL, KC_RSFT, KC_0`       |Send `KC_RCTL` when held, the mod `KC_RSFT` with the key `KC_0` when tapped.     |
+|`LAPO_KEYS`     |`KC_LALT, KC_LSFT, KC_9`       |Send `KC_LALT` when held, the mod `KC_LSFT` with the key `KC_9` when tapped.     |
+|`RAPC_KEYS`     |`KC_RALT, KC_RSFT, KC_0`       |Send `KC_RALT` when held, the mod `KC_RSFT` with the key `KC_0` when tapped.     |
 |`SFTENT_KEYS`   |`KC_RSFT, KC_TRNS, SFTENT_KEY` |Send `KC_RSFT` when held, no mod with the key `SFTENT_KEY` when tapped.          |


--- a/docs/keycodes.md
+++ b/docs/keycodes.md
@@ -216,6 +216,11 @@ This is a reference only. Each group of keys links to the page documenting their
 |`KC_GESC`      |`GRAVE_ESC`|Escape when tapped, <code>&#96;</code> when pressed with Shift or GUI|
 |`KC_LSPO`      |           |Left Shift when held, `(` when tapped                                |
 |`KC_RSPC`      |           |Right Shift when held, `)` when tapped                               |
+|`KC_LCPO`      |           |Left Control when held, `(` when tapped                              |
+|`KC_RCPC`      |           |Right Control when held, `)` when tapped                             |
+|`KC_LAPO`      |           |Left Alt when held, `(` when tapped                                  |
+|`KC_RAPC`      |           |Right Alt when held, `)` when tapped                                 |
+|`KC_SFTENT`    |           |Right Shift when held, Enter when tapped                             |
 |`KC_LEAD`      |           |The [Leader key](feature_leader_key.md)                              |
 |`KC_LOCK`      |           |The [Lock key](feature_key_lock.md)                                  |
 |`FUNC(n)`      |`F(n)`     |Call `fn_action(n)` (deprecated)                                     |
--- a/docs/quantum_keycodes.md
+++ b/docs/quantum_keycodes.md
@@ -1,6 +1,6 @@
 # Quantum Keycodes

-Quantum keycodes allow for easier customisation of your keymap than the basic ones provide, without having to define custom actions.
+Quantum keycodes allow for easier customization of your keymap than the basic ones provide, without having to define custom actions.

 All keycodes within quantum are numbers between `0x0000` and `0xFFFF`. Within your `keymap.c` it may look like you have functions and other special cases, but ultimately the C preprocessor will translate those into a single 4 byte integer. QMK has reserved `0x0000` through `0x00FF` for standard keycodes. These are keycodes such as `KC_A`, `KC_1`, and `KC_LCTL`, which are basic keys defined in the USB HID specification.

@@ -16,6 +16,11 @@ On this page we have documented keycodes between `0x00FF` and `0xFFFF` which are
 |`KC_GESC`      |`GRAVE_ESC`|Escape when tapped, <code>&#96;</code> when pressed with Shift or GUI|
 |`KC_LSPO`      |           |Left Shift when held, `(` when tapped                                |
 |`KC_RSPC`      |           |Right Shift when held, `)` when tapped                               |
+|`KC_LCPO`      |           |Left Control when held, `(` when tapped                              |
+|`KC_RCPC`      |           |Right Control when held, `)` when tapped                             |
+|`KC_LAPO`      |           |Left Alt when held, `(` when tapped                                  |
+|`KC_RAPC`      |           |Right Alt when held, `)` when tapped                                 |
+|`KC_SFTENT`    |           |Right Shift when held, Enter when tapped                             |
 |`KC_LEAD`      |           |The [Leader key](feature_leader_key.md)                              |
 |`KC_LOCK`      |           |The [Lock key](feature_key_lock.md)                                  |
 |`FUNC(n)`      |`F(n)`     |Call `fn_action(n)` (deprecated)                                     |
--- a/docs/zh-cn/contributing.md
+++ b/docs/zh-cn/contributing.md
@@ -0,0 +1,205 @@
+# 如何做贡献
+
+👍🎉 首先感谢各位百忙之中抽空阅读本文档，并为我们无私奉献。给您点赞啦！ 🎉👍
+
+第三方的帮助让Q酱成长了许多呢，Q酱也从你们那学到了不少新东西。Q酱希望每一个想帮助我的人都能很方便的做出有用的贡献。在这里我给摩拳擦掌的你们写了一点引导，让你们的代码在不对我做重大改动的情况下都能成功的被采纳哦。
+
+* [项目概况](#项目概况)
+* [代码规范](#代码规范)
+* [一般教程](#一般教程)
+* [行为守则对于我来说有何意义?](#行为守则对于我来说有何意义?)
+
+## 这文章巨长无比不想读啊! 我就想问个问题而已!
+
+您要是想问关于Q酱的问题的话可以在[OLKB Subreddit](https://reddit.com/r/olkb)或者是[Discord](https://discord.gg/Uq7gcHh)随意问。
+
+请记住:
+
+* 维护Q酱的小可爱有的时候可能会有点忙，不能及时回答您的问题，耐心等等，他们都是很nice的人呀。
+* 维护Q酱的人都是很无私的善良的人。无论是贡献代码还是回答问题，都是义务的。有时见到他们努力回答各种问题，解决各种BUG，Q酱也是很心疼的。
+* 您可以看看下面的教程，可以让您的问题浅显易懂，更容易回答：
+  * https://opensource.com/life/16/10/how-ask-technical-questions
+  * http://www.catb.org/esr/faqs/smart-questions.html
+
+# 项目概况
+
+Q酱很大一部分是用C语言组成的，不过有一小部分特性是C++的。怎么说呢，都是我的一部分，两个我都爱。Q酱一般是在键盘上的嵌入式处理器那里工作的，尤其与AVR([LUFA](http://www.fourwalledcubicle.com/LUFA.php))和ARM ([ChibiOS](http://www.chibios.com))两小哥哥搭配，干活不累，嘻嘻。如果您精通Arduino的话您会发现很多熟悉的概念，但也有点不爽，因为您以前的经验可能没法用来帮助Q酱。
+
+<!-- 需要修正: 这里放些学习C语言的资源。另外感谢修正的小可爱。谢谢您了。-->
+
+# Q酱，我在哪能帮助你嘞?
+
+您要是有问题的话可以 [提出一个issue](https://github.com/qmk/qmk_firmware/issues) 或 [在Discord上交流一下](https://discord.gg/Uq7gcHh).
+
+# Q酱，我如何帮助你?
+
+您以前是否没为开源贡献过代码，而又想知道帮助Q酱是怎么一回事? 稍安勿躁，咱给您总结一下！
+
+0. 先注册一个 [GitHub](https://github.com) 账户。
+1. 做好一个你要贡献的布局，那就要 [找一个你想解决的问题](https://github.com/qmk/qmk_firmware/issues)，或者 [找一个你想添加的特性](https://github.com/qmk/qmk_firmware/issues?q=is%3Aopen+is%3Aissue+label%3Afeature)。
+2. 把关联着问题的仓库分叉（fork）到你的仓库。这样你在`你的GitHub用户名/qmk_firmware`就有一个仓库备份啦。
+3. 使用 `git clone https://github.com/此处添GitHub用户名/此处添仓库名.git`这个命令把仓库同步到你的电脑中。
+4. 您要是想开发一个新特性的话可以先创建一个issue和Q酱的维护者讨论一下您要做什么。
+5. 使用`git checkout -b 此处写分支名字（别用汉字）`命令来创建一个分支（branch）用于开发。
+6. 对要解决的问题或要添加的特性进行适当的更改。
+7. 使用 `git add 把改变的文件的目录写这里` 可以添加改变的文件内容到git用于管理工程状态的索引（快照）里。
+8. 使用 `git commit -m "这里写修改的相关信息"` 来描述你做出了什么修改。
+9. 使用 `git push origin 此处写分支名字`来把你的更改同步到GitHub库里（反正不是打篮球那个库里）。
+10. 提交一个[QMK 固件的pull request](https://github.com/qmk/qmk_firmware/pull/new/master)。
+11. 给你的pull request拟一个标题，包括简短的描述和问题或错误代码。比如, 你可以起一个这样的"Added more log outputting to resolve #4352"（最好用英语，毕竟Q酱的中文也不是那么的溜，有可能会看不懂中文）。
+12. 在描述（description）里面写你做了哪些更改，你的代码里还存在什么问题, 或者你想问维护的小可爱们的问题。你的your pull request有点小问题无伤大雅(本来也没有完美的代码嘛), 维护的小可爱们会竭尽全力帮您改进的！
+13. 维护人员审查代码可能需要一些时间。
+14. 维护人员会通知您要更改什么地方，然后您就按照建议改一改。
+15. 预祝您合并成功！
+
+# 代码规范
+
+其实也没有什么特别严格的规范啦，但是俗话说的好：没有规矩，不成方圆。您可以看一下您的要改动的代码周围的画风，然后保持队形。如果你感觉周围都不知道是什么牛鬼蛇神的话就看看下面的建议：
+
+* 我们用肆(4)个空格来缩进(软件中也可以设置到Tab键)
+* 我们使用改良的1TBS(允许单行样式)
+  * 左大括号: 在开放性语句块那行的末尾
+  * 右大括号: 和开放性语句块第一个字母对齐
+  * Else If: 将右大括号放在行的开头，下一个左大括号放在同一行的结尾
+  * 可选大括号: 可选大括号是必选的
+    * 应该这样: if (condition) { return false; }
+    * 不应该这样: if (condition) return false;
+* 建议使用C语言风格的注释: `/* */`
+  * 把注释想象成一个描述特征的故事
+  * 充分使用注释来描述你为何这样修改
+  * 有些公认的东西就不要写到注释里面了
+  * 如果你不知道注释是否多余,看下面
+* 一般不要主动换行，主动换行的话每行不要超过76列
+* 要把 `#pragma once` 放到头文件的开始哦，抛弃老土的(`#ifndef THIS_FILE_H`, `#define THIS_FILE_H`, ..., `#endif`)吧
+* 下面两种预处理命令都可以用: `#ifdef DEFINED` 还有 `#if defined(DEFINED)`
+  * 以上那句对处女座不是很友好哈，处女座的朋友们就别纠结了，直接 `#if defined(DEFINED)` 。
+  * 还有就是选好一种风格就一直用，一直用一直爽，不要朝三暮四, 除非你要变化到多重条件的 `#if`。
+  * `#` 和 `if`要挨在一起哦，再让本空格在中间冒充电灯泡本空格会生气的。
+  * 以下是缩进规则:
+    * 首先考虑可读性，强迫症的朋友们总想要保持代码的高一致性，这样可不好。
+    * 保证文件已有风格不变。如果代码本来就是杂糅风格，那就见机行事，让你的修改更有意义些。
+    * 其实你也可以在缩进的时候看看周围其他代码，然后范水模山，预处理命令可以有自己的缩进风格。
+
+可以参照下面:
+
+```c
+/* foo 的 Enums*/
+enum foo_state {
+  FOO_BAR,
+  FOO_BAZ,
+};
+
+/* 有返回值的情况 */
+int foo(void) {
+  if (some_condition) {
+    return FOO_BAR;
+  } else {
+    return -1;
+  }
+}
+```
+
+# Clang-format的自动格式化
+[Clang-format](https://clang.llvm.org/docs/ClangFormat.html) 是LLVM的一部分，可以帮你自动格式化代码。我们给你准备好了一个适用于以上规范的配置文件，会帮你调整缩进和换行，你只需要写好括号就好。有了它，你再也不用担心调整代码格式太耗时，没有时间陪伴自己（虚构）的另一半了。
+
+使用[LLVM 完整安装](http://llvm.org/builds/)可以在Windows上安装clang-format, Ubuntu用户要用`sudo apt install clang-format`。
+
+命令行的朋友们, 加上 `-style=file`选项就会自动在QMK的根目录寻找.clang-format配置文件了。
+
+VSCode用户, 标准的 C/C++ 插件就支持clang-format, 或者可以用[独立扩展](https://marketplace.visualstudio.com/items?itemName=LLVMExtensions.ClangFormat)也行。
+
+有些东西(比如LAYOUT宏) 会被clang-format打乱，所以那些文件就别用clang-format了,这里就教您一个小窍门，在`// clang-format off` 和 `//clang-format on`之间装上会被搞乱的代码就好了。
+
+# 一般教程
+
+你可以给Q酱的不同部分添砖加瓦，但也要用不同的方法严谨检查。不论你修改哪里最好还是看看下边。
+
+* 将PR（pull request）分成一个个的逻辑单元。 比如，不要一次将两个新特性PR出去。要添加的特性排好队，一个一个来。
+* 提交之前看一眼，`git diff --check`的空格一定要写对了
+* 确定你的代码能通过编译
+  * 布局: 确定`make keyboard:your_new_keymap` 不返回错误
+  * 键盘: 确定 `make keyboard:all` 不返回错误
+  * 核心代码: 确定 `make all` 不返回错误
+* 提交的信息尽量明确。第一行写点简短介绍(每行不多于70个英文字母), 第二行空着,第三行和后面就要写些必要的细节了。最好用英文写，比如:
+
+```
+Adjust the fronzlebop for the kerpleplork
+
+The kerpleplork was intermittently failing with error code 23. The root cause was the fronzlebop setting, which causes the kerpleplork to activate every N iterations.
+
+Limited experimentation on the devices I have available shows that 7 is high enough to avoid confusing the kerpleplork, but I'd like to get some feedback from people with ARM devices to be sure.
+```
+
+## 文档
+
+想帮助Q酱当然是先看文档最简单了。找到这个文档哪里错了然后改正它对于你来说超级简单! 我们也对有写文档能力的人求贤若渴，如果你是对的人[点这个](#Q酱，我在哪能帮助你嘞?)!
+
+文档呢，都静静的放在`qmk_firmware/docs` 目录里, 也或者您想为网页做贡献的话也是可以的哦。
+
+在文档中附代码案例时, 先观察文档其他地方的命名规范。比如, 把enums的名字都改成像`my_layers`或者`my_keycodes`来防止名字不一致的enums被当作特务枪毙:
+
+```c
+enum my_layers {
+  _FIRST_LAYER,
+  _SECOND_LAYER
+};
+
+enum my_keycodes {
+  FIRST_LAYER = SAFE_RANGE,
+  SECOND_LAYER
+};
+```
+
+## 布局
+
+大多数QMK新手都从创建一个自己的布局开始。我们尽力保证布局规范宽松 (毕竟布局是个性的体现) 不过建议遵守以下准则，这样可以让别人更好理解你的代码
+
+* 用 [模板](documentation_templates.md)写个`readme.md`。
+* 所有的布局PR都会被squash, 如果你想知道你的提交是怎么被squash的那你就自己来吧
+* 不要把新特性和布局一起PR。可以分别PR他们
+* 布局文件夹就不要放`Makefile`了，这个操作都过时啦
+* 更新文件头部的copyrights(看`%YOUR_NAME%`那)
+
+## 键盘
+
+QMK的最终归宿是键盘。有些键盘是社区维护的，有一些是制作这些键盘的人维护的。`readme.md`会告诉你是谁维护了这个键盘，如果你对某个键盘有疑问，可以 [创建一个Issue](https://github.com/qmk/qmk_firmware/issues) 来问一问维护者。
+
+我们建议你按下面的来操作:
+
+* 用[模板](documentation_templates.md)写`readme.md`。
+* 提交数量尽量合理，不然我们可就要把你的PR给squash了。
+* 不要把新特性和新键盘一起PR。可以分别PR他们
+* 用父文件夹的名字命名 `.c`/`.h`文件, 比如`/keyboards/<kb1>/<kb2>/<kb2>.[ch]`
+* 键盘文件夹就不要放`Makefile`了，这个操作都过时啦
+* 更新文件头部的copyrights(看`%YOUR_NAME%`那)
+
+## Quantum/TMK 核心
+
+在您废寝忘食地开发Q酱新特性或者帮Q酱驱虫之前，一定要确保你的工作是有意义的。看看[了解QMK](understanding_qmk.md)你会对Q酱有更深的了解，这个文档将带你领略QMK的程序流程。现在你应该和维护团对谈谈来了解实现你想法的最佳方法了。一下渠道都可以：
+
+* [在Discord交流](https://discord.gg/Uq7gcHh)
+* [建立一个Issue](https://github.com/qmk/qmk_firmware/issues/new)
+
+新特性和BUG的修复影响所有键盘。开发组也在翻修QMK。所以，在实施重大返修之前一定要讨论一下。如果你在没有事先与维护团队沟通的情况下提交了一个PR，而且你的选择与维护团队的计划方向不符，那你可能要面临大改了。
+
+修复BUG或者开发新特性之前看看这个：
+
+* **默认不启用** - QMK运行的芯片多数内存有限，所以首要考虑的还应该是布局不要被破坏，于是特性默认是不启用的。你喜欢什么特性的话就打开它，如果你觉得有些特性应该默认开启或者你能帮助缩减代码，那就联系维护组吧。
+* **提交之前在本地编译** - 这个简直就是家喻户晓了，但是也确实需要编译啊！ 我们的Travis系统会发现一切问题，但是自己编译一下可要比在线等快多了。
+* **注意版本和芯片平台** - 有那么几个键盘有支持不同配置甚至是不同芯片的版本。试着写一个能AVR和ARM两个平台运行的特性，或者在不支持的平台自动禁用。
+* **解释你的新特性** - 在`docs/`写个文档, 你可以创建新文档或者写到现有文档中。如果你不把它记录下来，其他人就无法从你的努力中获益。
+
+也可以看看以下建议：
+
+* 提交数量尽量合理，不然我们可就要把你的PR给squash了。
+* 不要把新特性、布局和键盘一起PR。可以分别PR他们。
+* 给你的特性写[单元测试](unit_testing.md)。
+* 你编辑的文件风格要一致，如果风格不明确或者是混搭风的，你就要先看看[代码规范](#代码规范)确认情况。
+
+## 重构
+
+为了保持QMK脉络清晰，Q酱打算深入规划重构一下自己，然后让合作者进行修改。如果你有重构的思路或建议[创建一个issue](https://github.com/qmk/qmk_firmware/issues), Q酱很乐意讨论一下怎么改进一下。
+
+# 行为守则对于我来说有何意义?
+
+我们的[行为守则](https://github.com/qmk/qmk_firmware/blob/master/CODE_OF_CONDUCT.md) 是说明您有责任尊重和礼貌地对待项目中的每个人，无论他们的身份如何。 如果你是我们行为准则所描述的不当行为的受害者，我们将站在你这边，并按照行为准则对施暴者进行适当谴责。
--- a/docs/zh-cn/faq.md
+++ b/docs/zh-cn/faq.md
@@ -0,0 +1,6 @@
+# 常见问题
+
+* [一般问题](faq_general.md)
+* [构建和编译QMK](faq_build.md)
+* [QMK调试和故障排除](faq_debug.md)
+* [布局问题](faq_keymap.md)
--- a/docs/zh-cn/getting_started_getting_help.md
+++ b/docs/zh-cn/getting_started_getting_help.md
@@ -0,0 +1,15 @@
+# 获得帮助
+
+有很多方法来获得关于QMK的帮助.
+
+## 实时聊天
+
+你可以在我们的主要[Discord服务器](https://discord.gg/Uq7gcHh)找到QMK的开发者和用户。有很多讨论固件的不同频道, 工具箱(Toolbox), 硬件,配置工具(configurator).
+
+## OLKB Subreddit
+
+QMK的官方论坛是[/r/olkb](https://reddit.com/r/olkb) 在[reddit.com](https://reddit.com)上.
+
+## Github的Issue
+
+你可以在GitHub上 [提出issue](https://github.com/qmk/qmk_firmware/issues).当您的问题需要长期讨论或调试时，这尤其方便。
--- a/docs/zh-cn/getting_started_github.md
+++ b/docs/zh-cn/getting_started_github.md
@@ -0,0 +1,59 @@
+# 如何在QMK中使用Github
+
+Github can be a little tricky to those that aren't familiar with it - this guide will walk through each step of forking, cloning, and submitting a pull request with QMK.
+
+?> 本教程假设您已安装GitHub，并且您喜欢使用命令行工作。
+
+首先 [Github上的QMK页面](https://github.com/qmk/qmk_firmware), 您能看到右上方有个按钮写着"Fork":
+
+![从Github上分叉](http://i.imgur.com/8Toomz4.jpg)
+
+如果你是某组织成员，你将需要选择分叉到哪个账户。一般情况下, 你是想要分叉到你的私人账户下。当你完成分叉 (有时需要等一会), 点击"Clone or Download" 按钮:
+
+!从Github下载](http://i.imgur.com/N1NYcSz.jpg)
+
+你要选择 "HTTPS", 然后选择链接复制:
+
+![HTTPS链接](http://i.imgur.com/eGO0ohO.jpg)
+
+然后，在命令行输入`git clone `，然后粘贴你的链接:
+
+```
+user@computer:~$ git clone https://github.com/whoeveryouare/qmk_firmware.git
+Cloning into 'qmk_firmware'...
+remote: Counting objects: 46625, done.
+remote: Compressing objects: 100% (2/2), done.
+remote: Total 46625 (delta 0), reused 0 (delta 0), pack-reused 46623
+Receiving objects: 100% (46625/46625), 84.47 MiB | 3.14 MiB/s, done.
+Resolving deltas: 100% (29362/29362), done.
+Checking out files: 100% (2799/2799), done.
+```
+
+现在你本地计算机有QMK的分叉了,你可以添加你的布局了, 为你的键盘编译并刷新固件吧。如果你觉得你的修改很不错, 你可以添加,提交,然后想你的分叉推出（pull）你的改变，像这样:
+
+```
+user@computer:~$ git add .
+user@computer:~$ git commit -m "adding my keymap"
+[master cccb1608] adding my keymap
+ 1 file changed, 1 insertion(+)
+ create mode 100644 keyboards/planck/keymaps/mine/keymap.c
+user@computer:~$ git push
+Counting objects: 1, done.
+Delta compression using up to 4 threads.
+Compressing objects: 100% (1/1), done.
+Writing objects: 100% (1/1), 1.64 KiB | 0 bytes/s, done.
+Total 1 (delta 1), reused 0 (delta 0)
+remote: Resolving deltas: 100% (1/1), completed with 1 local objects.
+To https://github.com/whoeveryouare/qmk_firmware.git
+ + 20043e64...7da94ac5 master -> master
+```
+
+现在你的改动已经在你Github上的分支中了 - 如果你回到这 (`https://github.com/你的GitHub账户名/qmk_firmware`) ,你可以点击下方所示按钮创建 "New Pull Request":
+
+![新的 Pull Request](http://i.imgur.com/DxMHpJ8.jpg)
+
+现在你可以看到你所做的一切 - 如果看起来不错, 就可以点击 "Create Pull Request"定稿了:
+
+![创建Pull Request](http://i.imgur.com/Ojydlaj.jpg)
+
+提交后,我们会开跟你说你的改动,要求您进行更改, 并最终接受您的更改!感谢您为QMK做的贡献 :)
--- a/docs/zh-cn/newbs.md
+++ b/docs/zh-cn/newbs.md
@@ -0,0 +1,23 @@
+# QMK菜鸟教程
+
+QMK是为你机械硬盘设计的的一个强大的开源固件。使用QMK可以很简单的让你的定制键盘变得强大。看完这篇文章，无论你是菜鸟还是大佬，都可以顺利的使用QMK来定制键盘。
+
+你是否为不知道你的键盘能不能运行QMK而苦恼? 如果你的机械键盘是你自己做的，那么这把键盘一般可以运行QMK。我们提供了[一大堆自制键盘](http://qmk.fm/keyboards/), 所以即便你的键盘不能运行QMK你也很容易能找到满足你需求的键盘。
+
+## 概览
+
+这个教程有7个主要部分：
+
+* [新手上路](newbs_getting_started.md)
+* [用命令行构建你的第一个固件](newbs_building_firmware.md)
+* [用在线界面构建你的第一个固件](newbs_building_firmware_configurator.md)
+* [刷新固件](newbs_flashing.md)
+* [测试和调试](newbs_testing_debugging.md)
+* [Git最佳实践](newbs_best_practices.md)
+* [其他学习资源](newbs_learn_more_resources.md)
+
+这份教程旨在帮助没有固件构建经验的人，也是根据该目的做出选择和建议。这些程序有很多替代方法，大部分替代我们都支持。如果你对完成一个任务有疑问，可以[向我们寻求帮助](getting_started_getting_help.md).
+
+## 其他资源
+
+* [Thomas Baart的 QMK基础博客](https://thomasbaart.nl/category/mechanical-keyboards/firmware/qmk/qmk-basics/) – 这是一个用户创建的博客，涵盖了为新手准备的使用QMK的基础知识。
--- a/keyboards/dz60/keymaps/billiams/keymap.c
+++ b/keyboards/dz60/keymaps/billiams/keymap.c
@@ -28,9 +28,9 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
   * ,-----------------------------------------------------------------------------------------.
   * |     |  F1 |  F2 |  F3 |  F4 |  F5 |  F6 |  F7 |  F8 |  F9 | F10 | F11 | F12 |    DEL    |
   * |-----------------------------------------------------------------------------------------+
-   * |        |RBB T|RGB M| Hue-| Hue+| Sat-| Sat+| Val-| Val+|     |     | Mute | Prev | Next |
+   * |        |RBB T|RGB M| Hue-| Hue+| Sat-| Sat+| Val-| Val+| Mute | Vol-| Vol+| Prev | Next |
   * |-----------------------------------------------------------------------------------------+
-   * |         |     |     |     |     |     |     |     |    |     | Vol- | Vol+ | Play/Pause |
+   * |         |     |     |     |     |     | Left| Down| Up |Right|      |      | Play/Pause |
   * |-----------------------------------------------------------------------------------------+
   * |           |     |     |     |     |     |     |     |Scr- |Scr+ |           |PG_UP|RESET|
   * |-----------------------------------------------------------------------------------------+
@@ -40,8 +40,8 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {

  LAYOUT_directional(
      _______, KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,  KC_F10, KC_F11, KC_F12, _______, KC_DEL,
-      _______, RGB_TOG, RGB_MOD, RGB_HUD, RGB_HUI, RGB_SAD, RGB_SAI, RGB_VAD, RGB_VAI, _______, _______, _______, KC_MRWD, KC_MFFD,
-      _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_MUTE, KC__VOLDOWN, KC__VOLUP,
+      _______, RGB_TOG, RGB_MOD, RGB_HUD, RGB_HUI, RGB_SAD, RGB_SAI, RGB_VAD, RGB_VAI, KC_MUTE, KC__VOLDOWN, KC__VOLUP, KC_MRWD, KC_MFFD,
+      _______, _______, _______, _______, _______, _______, KC_LEFT, KC_DOWN, KC_UP, KC_RIGHT, _______, _______,
      KC_MPLY, _______, _______, _______, _______, _______, _______, _______, _______, KC_BRID, KC_BRIU, _______, _______, KC_PGUP, RESET,
      _______, _______, _______, _______, _______, _______, _______, _______, KC_HOME, KC_PGDOWN, KC_END
      ),
--- a/keyboards/dz60/keymaps/billiams/readme.md
+++ b/keyboards/dz60/keymaps/billiams/readme.md
@@ -11,6 +11,7 @@ Settings:
 * `/ ?` are available when you tap the right shift. Otherwise RShift is shift when held down
 * RESET is available as `Fn`+ ` ESC`
 * Underglow toggle is available as `Fn` + `Q`. Yes your keyboard has lights even if you didn't get the LEDs. Bonus!
+* vim-style arrow key bindings H J K L in layer 1

 ### Initial Installation

@@ -59,9 +60,9 @@ FN Layer
 ,-----------------------------------------------------------------------------------------.
 |  `  |  F1 |  F2 |  F3 |  F4 |  F5 |  F6 |  F7 |  F8 |  F9 | F10 | F11 | F12 |    DEL    |
 |-----------------------------------------------------------------------------------------+
-|        |RBB T|RGB M| Hue-| Hue+| Sat-| Sat+| Val-| Val+|     |     | MUTE | Prev | Next |
+|        |RBB T|RGB M| Hue-| Hue+| Sat-| Sat+| Val-| Val+| Mute | Vol-| Vol+| Prev | Next |
 |-----------------------------------------------------------------------------------------+
-|         |     |     |     |     |     |     |     |     |    | Vol- | Vol+ | Play/Pause |
+|         |     |     |     |     |     | Left| Down| Up |Right|      |      | Play/Pause |
 |-----------------------------------------------------------------------------------------+
 |           |     |     |     |     |     |     |     |Scr- |Scr+ |         | PG_UP |RESET|
 |-----------------------------------------------------------------------------------------+
--- a/keyboards/hs60/v2/keymaps/stanrc85/keymap.c
+++ b/keyboards/hs60/v2/keymaps/stanrc85/keymap.c
@@ -17,33 +17,33 @@
 #include "stanrc85.h"

 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-	[0] = LAYOUT_60_ansi(
-		TD_TESC, KC_1,    KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_BSPC,
-		KC_TAB,  KC_Q,    KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC, KC_BSLS,
-		KC_CTLE, KC_A,    KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K,    KC_L,    KC_SCLN, KC_QUOT, KC_ENT,
-		KC_LSFT, KC_Z,    KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT,  KC_SLSH, KC_RSFT,
-		KC_LCTL, KC_LGUI, KC_LALT,          LT_SPCF,          KC_RALT, TD_TWIN, MO(3),   TD_TCTL),
+  [0] = LAYOUT_60_ansi(
+	TD_TESC, KC_1,    KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_BSPC,
+	KC_TAB,  KC_Q,    KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC, KC_BSLS,
+	KC_CTLE, KC_A,    KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K,    KC_L,    KC_SCLN, KC_QUOT, KC_ENT,
+	KC_LSFT, KC_Z,    KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT,  KC_SLSH, KC_RSFT,
+	KC_LCTL, KC_LGUI, KC_LALT,          LT_SPCF,          KC_RALT, TD_TWIN, MO(3),   TD_TCTL),

-	[1] = LAYOUT_60_ansi(
-		KC_GESC, KC_1,    KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8,    KC_9,   KC_0,    KC_MINS, KC_EQL,  KC_BSPC,
-		KC_TAB,  KC_Q,    KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I,    KC_O,   KC_P,    KC_LBRC, KC_RBRC, KC_BSLS,
-		KC_CAPS, KC_A,    KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K,    KC_L,   KC_SCLN, KC_QUOT, KC_ENT,
-		KC_LSFT, KC_Z,    KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT,
-		KC_LCTL, KC_LGUI, KC_LALT,          KC_SPC ,          KC_RALT, MO(2),  MO(3),   KC_RCTL),
+  [1] = LAYOUT_60_ansi(
+	KC_GESC, KC_1,    KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8,    KC_9,   KC_0,    KC_MINS, KC_EQL,  KC_BSPC,
+	KC_TAB,  KC_Q,    KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I,    KC_O,   KC_P,    KC_LBRC, KC_RBRC, KC_BSLS,
+	KC_CAPS, KC_A,    KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K,    KC_L,   KC_SCLN, KC_QUOT, KC_ENT,
+	KC_LSFT, KC_Z,    KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT,
+	KC_LCTL, KC_LGUI, KC_LALT,          KC_SPC ,          KC_RALT, MO(2),  MO(3),   KC_RCTL),

-	[2] = LAYOUT_60_ansi(
-		KC_TILD, KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_DEL,
-		_______, _______, CA_QUOT, KC_VOLU, CA_SCLN, _______, _______, KC_HOME, KC_UP,   KC_END,  _______, _______, _______, KC_INS,
-		KC_CAPS, _______, KC_MUTE, KC_VOLD, KC_MPLY, _______, _______, KC_LEFT, KC_DOWN, KC_RGHT, _______, _______, _______,
-		_______, KC_RDP,  _______, _______, _______, _______, _______, _______, KC_WBAK, KC_WFWD, _______, _______,
-		_______, _______, _______,                   _______,                   _______, _______, _______, _______),
+  [2] = LAYOUT_60_ansi(
+	KC_TILD, KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_DEL,
+	_______, _______, CA_QUOT, KC_VOLU, CA_SCLN, _______, _______, KC_HOME, KC_UP,   KC_END,  KC_PSCR, _______, _______, KC_INS,
+	KC_CAPS, _______, KC_MUTE, KC_VOLD, KC_MPLY, _______, _______, KC_LEFT, KC_DOWN, KC_RGHT, _______, _______, _______,
+	_______, KC_RDP,  _______, _______, _______, _______, _______, _______, KC_WBAK, KC_WFWD, _______, _______,
+	_______, _______, _______,                   _______,                   _______, _______, _______, _______),

-	[3] = LAYOUT_60_ansi(
-		_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, EEP_RST,
-		_______, EF_INC,  ES_INC,  S1_INC,  H1_INC,  S2_INC,  H2_INC,  BR_INC,  _______, _______, _______, _______, _______, RESET,
-		TG(1),   EF_DEC,  ES_DEC,  S1_DEC,  H1_DEC,  S2_DEC,  H2_DEC,  BR_DEC,  _______, _______, _______, _______, KC_MAKE,
-		_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
-		_______, _______, _______,                   _______,                   _______, _______, _______, _______)
+  [3] = LAYOUT_60_ansi(
+	_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, EEP_RST,
+	_______, EF_INC,  ES_INC,  S1_INC,  H1_INC,  S2_INC,  H2_INC,  BR_INC,  _______, _______, _______, _______, _______, RESET,
+	_______, EF_DEC,  ES_DEC,  S1_DEC,  H1_DEC,  S2_DEC,  H2_DEC,  BR_DEC,  _______, _______, _______, _______, KC_MAKE,
+	_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+	_______, _______, _______,                   _______,                   _______, _______, _______, TG(1))
 };

 // Backlight specific keys:
--- a/keyboards/hs60/v2/keymaps/stanrc85/rules.mk
+++ b/keyboards/hs60/v2/keymaps/stanrc85/rules.mk
@@ -1,9 +1,9 @@
 # project specific files
 SRC =	keyboards/zeal60/zeal60.c \
-    keyboards/zeal60/rgb_backlight.c \
-		drivers/issi/is31fl3733.c \
-		quantum/color.c \
-		drivers/arm/i2c_master.c
+        keyboards/zeal60/rgb_backlight.c \
+	    drivers/issi/is31fl3733.c \
+	    quantum/color.c \
+	    drivers/arm/i2c_master.c

 ## chip/board settings
 #   the next two should match the directories in
--- a/keyboards/kbdfans/kbd67/rev2/config.h
+++ b/keyboards/kbdfans/kbd67/rev2/config.h
@@ -0,0 +1,64 @@
+/*
+Copyright 2019 Vorror
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0xFEED
+#define PRODUCT_ID      0x6060
+#define DEVICE_VER      0x0001
+#define MANUFACTURER    KBDFans
+#define PRODUCT         KBD67v2
+#define DESCRIPTION     65% Keyboard
+
+/* key matrix size */
+#define MATRIX_ROWS 5
+#define MATRIX_COLS 16
+
+#define MATRIX_ROW_PINS { B7, D0, F0, F1, F4 }
+#define MATRIX_COL_PINS { B0, B1, B2, B3, D1, D2, D3, D6, D7, B4, B6, C6, C7, F7, F6, F5 }
+#define UNUSED_PINS
+
+/* COL2ROW or ROW2COL */
+#define DIODE_DIRECTION COL2ROW
+
+/* number of backlight levels */
+#define BACKLIGHT_PIN B5
+#ifdef BACKLIGHT_PIN
+#define BACKLIGHT_LEVELS 3
+#endif
+
+/* Set 0 if debouncing isn't needed */
+#define DEBOUNCING_DELAY 5
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+#define RGB_DI_PIN E2
+#ifdef RGB_DI_PIN
+#define RGBLIGHT_ANIMATIONS
+#define RGBLED_NUM 18
+#define RGBLIGHT_HUE_STEP 8
+#define RGBLIGHT_SAT_STEP 8
+#define RGBLIGHT_VAL_STEP 8
+#define RGBLIGHT_LIMIT_VAL 240
+#endif
--- a/keyboards/kbdfans/kbd67/rev2/info.json
+++ b/keyboards/kbdfans/kbd67/rev2/info.json
@@ -0,0 +1,16 @@
+{
+  "keyboard_name": "kbd67v2",
+  "url": "",
+  "maintainer": "qmk",
+  "width": 16,
+  "height": 5,
+  "layouts": {
+      "LAYOUT_all": {
+          "layout": [{"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":4, "y":0}, {"x":5, "y":0}, {"x":6, "y":0}, {"x":7, "y":0}, {"x":8, "y":0}, {"x":9, "y":0}, {"x":10, "y":0}, {"x":11, "y":0}, {"x":12, "y":0}, {"x":13, "y":0}, {"x":14, "y":0}, {"x":15, "y":0}, {"x":0, "y":1, "w":1.5}, {"x":1.5, "y":1}, {"x":2.5, "y":1}, {"x":3.5, "y":1}, {"x":4.5, "y":1}, {"x":5.5, "y":1}, {"x":6.5, "y":1}, {"x":7.5, "y":1}, {"x":8.5, "y":1}, {"x":9.5, "y":1}, {"x":10.5, "y":1}, {"x":11.5, "y":1}, {"x":12.5, "y":1}, {"x":13.5, "y":1, "w":1.5}, {"x":15, "y":1}, {"x":0, "y":2, "w":1.75}, {"x":1.75, "y":2}, {"x":2.75, "y":2}, {"x":3.75, "y":2}, {"x":4.75, "y":2}, {"x":5.75, "y":2}, {"x":6.75, "y":2}, {"x":7.75, "y":2}, {"x":8.75, "y":2}, {"x":9.75, "y":2}, {"x":10.75, "y":2}, {"x":11.75, "y":2}, {"x":12.75, "y":2, "w":2.25}, {"x":15, "y":2}, {"x":0, "y":3, "w":1.25}, {"x":1.25, "y":3}, {"x":2.25, "y":3}, {"x":3.25, "y":3}, {"x":4.25, "y":3}, {"x":5.25, "y":3}, {"x":6.25, "y":3}, {"x":7.25, "y":3}, {"x":8.25, "y":3}, {"x":9.25, "y":3}, {"x":10.25, "y":3}, {"x":11.25, "y":3}, {"x":12.25, "y":3, "w":1.75}, {"x":14, "y":3}, {"x":15, "y":3}, {"x":0, "y":4, "w":1.25}, {"x":1.25, "y":4, "w":1.25}, {"x":2.5, "y":4, "w":1.25}, {"x":3.75, "y":4, "w":2.75}, {"x":6.5, "y":4, "w":1.25}, {"x":7.75, "y":4, "w":2.25}, {"x":10, "y":4}, {"x":11, "y":4}, {"x":12, "y":4}, {"x":13, "y":4}, {"x":14, "y":4}, {"x":15, "y":4}]
+      },
+
+      "LAYOUT_65_ansi": {
+          "layout": [{"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":4, "y":0}, {"x":5, "y":0}, {"x":6, "y":0}, {"x":7, "y":0}, {"x":8, "y":0}, {"x":9, "y":0}, {"x":10, "y":0}, {"x":11, "y":0}, {"x":12, "y":0}, {"x":13, "y":0, "w":2}, {"x":15, "y":0}, {"x":0, "y":1, "w":1.5}, {"x":1.5, "y":1}, {"x":2.5, "y":1}, {"x":3.5, "y":1}, {"x":4.5, "y":1}, {"x":5.5, "y":1}, {"x":6.5, "y":1}, {"x":7.5, "y":1}, {"x":8.5, "y":1}, {"x":9.5, "y":1}, {"x":10.5, "y":1}, {"x":11.5, "y":1}, {"x":12.5, "y":1}, {"x":13.5, "y":1, "w":1.5}, {"x":15, "y":1}, {"x":0, "y":2, "w":1.75}, {"x":1.75, "y":2}, {"x":2.75, "y":2}, {"x":3.75, "y":2}, {"x":4.75, "y":2}, {"x":5.75, "y":2}, {"x":6.75, "y":2}, {"x":7.75, "y":2}, {"x":8.75, "y":2}, {"x":9.75, "y":2}, {"x":10.75, "y":2}, {"x":11.75, "y":2}, {"x":12.75, "y":2, "w":2.25}, {"x":15, "y":2}, {"x":0, "y":3, "w":2.25}, {"x":2.25, "y":3}, {"x":3.25, "y":3}, {"x":4.25, "y":3}, {"x":5.25, "y":3}, {"x":6.25, "y":3}, {"x":7.25, "y":3}, {"x":8.25, "y":3}, {"x":9.25, "y":3}, {"x":10.25, "y":3}, {"x":11.25, "y":3}, {"x":12.25, "y":3, "w":1.75}, {"x":14, "y":3}, {"x":15, "y":3}, {"x":0, "y":4, "w":1.25}, {"x":1.25, "y":4, "w":1.25}, {"x":2.5, "y":4, "w":1.25}, {"x":3.75, "y":4, "w":6.25}, {"x":10, "y":4}, {"x":11, "y":4}, {"x":12, "y":4}, {"x":13, "y":4}, {"x":14, "y":4}, {"x":15, "y":4}]
+      }
+  }
+}
--- a/keyboards/kbdfans/kbd67/rev2/keymaps/default/config.h
+++ b/keyboards/kbdfans/kbd67/rev2/keymaps/default/config.h
@@ -0,0 +1,19 @@
+/* Copyright 2018 MechMerlin
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+// place overrides here
--- a/keyboards/kbdfans/kbd67/rev2/keymaps/default/keymap.c
+++ b/keyboards/kbdfans/kbd67/rev2/keymaps/default/keymap.c
@@ -0,0 +1,99 @@
+/* Copyright 2018 'mechmerlin'
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+
+// Defines the keycodes used by our macros in process_record_user
+enum custom_keycodes {
+  QMKBEST = SAFE_RANGE,
+  QMKURL
+};
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+/* Keymap (Base Layer) Default Layer
+   * ,----------------------------------------------------------------.
+   * |Esc|  1|  2|  3|  4|  5|  6|  7|  8|  9|  0|  -|  =|Backsp |Home|
+   * |----------------------------------------------------------------|
+   * |Tab  |  Q|  W|  E|  R|  T|  Y|  U|  I|  O|  P|  [|  ]|  \  |PgUp|
+   * |----------------------------------------------------------------|
+   * |Ctrl   |  A|  S|  D|  F|  G|  H|  J|  K|  L|  ;|  '|Return |PgDn|
+   * |----------------------------------------------------------------|
+   * |Shift   |  Z|  X|  C|  V|  B|  N|  M|  ,|  .|  /|Shift | Up|End |
+   * |----------------------------------------------------------------|
+   * |Ctrl|Win |Alt |        Space          |Alt| FN|Ctrl|Lef|Dow|Rig |
+   * `----------------------------------------------------------------'
+   */
+[0] = LAYOUT_65_ansi(
+  KC_ESC,  KC_1,    KC_2,   KC_3,   KC_4,   KC_5,   KC_6,   KC_7,   KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_BSPC, KC_HOME, \
+  KC_TAB,  KC_Q,    KC_W,   KC_E,   KC_R,   KC_T,   KC_Y,   KC_U,   KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC, KC_BSLS, KC_PGUP, \
+  KC_LCTL, KC_A,    KC_S,   KC_D,   KC_F,   KC_G,   KC_H,   KC_J,   KC_K,    KC_L,    KC_SCLN, KC_QUOT,          KC_ENT, KC_PGDN,  \
+  KC_LSFT, KC_Z,    KC_X,   KC_C,   KC_V,   KC_B,   KC_N,   KC_M,   KC_COMM, KC_DOT,  KC_SLSH, KC_RSFT, KC_UP,   KC_END,           \
+  KC_LCTL, KC_LGUI, KC_LALT,                KC_SPC,                          KC_RALT, MO(1),   KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT),
+
+  /* Keymap Fn Layer
+   * ,----------------------------------------------------------------.
+   * |~ `|F1 |F2 |F3 |F4 |F5 |F6 |F7 |F8 |F9 |F10|F11|F12|Del    |Ins |
+   * |----------------------------------------------------------------|
+   * |Caps |   |Up |   |   |   |   |   |PSc|SLk|Pau|Up |   |     |    |
+   * |----------------------------------------------------------------|
+   * |      |Lef|Dow|Rig|   |   |   |   |Hom|PUp|Lef|Rig|        |    |
+   * |----------------------------------------------------------------|
+   * |        |   |   |   |   |   |   |   |End|PDn|Dow|      |PUp|    |
+   * |----------------------------------------------------------------|
+   * |    |    |    |                       |   |   |    |Hom|PDn|End |
+   * `----------------------------------------------------------------'
+   */
+[1] = LAYOUT_65_ansi(
+   KC_GRV,  KC_F1,  KC_F2,  KC_F3,  KC_F4,  KC_F5,  KC_F6,  KC_F7,  KC_F8,  KC_F9, KC_F10, KC_F11, KC_F12,          KC_DEL,KC_INS, \
+   KC_CAPS,_______,  KC_UP,_______,_______,_______,_______,_______,KC_PSCR,KC_SLCK,KC_PAUS,  KC_UP,_______,     _______,_______,   \
+      _______,KC_LEFT,KC_DOWN,KC_RGHT,_______,_______,_______,_______,KC_HOME,KC_PGUP,KC_LEFT,KC_RGHT,            _______,_______, \
+           _______,_______,_______,_______,_______,_______,_______,_______, KC_END,KC_PGDN,KC_DOWN,       _______,KC_PGUP,_______, \
+    _______,  _______,  _______,                     _______,                     _______,_______,_______,KC_HOME,KC_PGDN, KC_END),
+
+};
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+  switch (keycode) {
+    case QMKBEST:
+      if (record->event.pressed) {
+        // when keycode QMKBEST is pressed
+        SEND_STRING("QMK is the best thing ever!");
+      } else {
+        // when keycode QMKBEST is released
+      }
+      break;
+    case QMKURL:
+      if (record->event.pressed) {
+        // when keycode QMKURL is pressed
+        SEND_STRING("https://qmk.fm/" SS_TAP(X_ENTER));
+      } else {
+        // when keycode QMKURL is released
+      }
+      break;
+  }
+  return true;
+}
+
+void matrix_init_user(void) {
+
+}
+
+void matrix_scan_user(void) {
+
+}
+
+void led_set_user(uint8_t usb_led) {
+
+}
--- a/keyboards/kbdfans/kbd67/rev2/keymaps/default/readme.md
+++ b/keyboards/kbdfans/kbd67/rev2/keymaps/default/readme.md
@@ -0,0 +1 @@
+# The default keymap for kbd67
--- a/keyboards/kbdfans/kbd67/rev2/keymaps/koba/config.h
+++ b/keyboards/kbdfans/kbd67/rev2/keymaps/koba/config.h
@@ -0,0 +1,17 @@
+/* Copyright 2019 Daisuke Kobayashi
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
--- a/keyboards/kbdfans/kbd67/rev2/keymaps/koba/keymap.c
+++ b/keyboards/kbdfans/kbd67/rev2/keymaps/koba/keymap.c
@@ -0,0 +1,61 @@
+/* Copyright 2019 Daisuke Kobayashi
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+#include "keymap_jp.h"
+
+#define RGB_RMO RGB_RMOD
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+/* Keymap (Base Layer) Default Layer
+   * ,----------------------------------------------------------------.
+   * |Esc|  1|  2|  3|  4|  5|  6|  7|  8|  9|  0|  -|  ^|  \|BS |Del |
+   * |----------------------------------------------------------------|
+   * |Tab  |  Q|  W|  E|  R|  T|  Y|  U|  I|  O|  P|  @|  [| Ent |PgUp|
+   * |------------------------------------------------------.    |----|
+   * |H/Z   |  A|  S|  D|  F|  G|  H|  J|  K|  L|  ;|  :|  ]|    |PgDn|
+   * |----------------------------------------------------------------|
+   * |Shift   |  Z|  X|  C|  V|  B|  N|  M|  ,|  .|  /|Shift |Up |PScr|
+   * |----------------------------------------------------------------|
+   * |Ctrl|Win |Alt | Space    |Fn | Space  |Alt |Ctrl|  |Lef|Dow|Rig |
+   * `------------------------------------------------'  `------------'
+   */
+[0] = LAYOUT_all(
+  KC_ESC,  KC_1,   KC_2,   KC_3,   KC_4,   KC_5,   KC_6,   KC_7,   KC_8,    KC_9,    KC_0,    KC_MINS, JP_CIRC, KC_JYEN, KC_BSPC, KC_DELT, \
+  KC_TAB,     KC_Q,   KC_W,   KC_E,   KC_R,   KC_T,   KC_Y,   KC_U,   KC_I,    KC_O,    KC_P,    JP_AT,   JP_LBRC, JP_RBRC,       KC_PGUP, \
+  KC_ZKHK,       KC_A,   KC_S,   KC_D,   KC_F,   KC_G,   KC_H,   KC_J,   KC_K,    KC_L,    KC_SCLN, JP_COLN,       KC_ENT,        KC_PGDN, \
+  KC_LSFT, XXXXXXX, KC_Z,   KC_X,   KC_C,   KC_V,   KC_B,   KC_N,   KC_M,   KC_COMM, KC_DOT,  KC_SLSH, KC_RSFT,          KC_UP,   KC_PSCR, \
+  KC_LCTL, KC_LGUI, KC_LALT,        KC_SPC,         MO(1),          KC_SPC,          KC_RALT, KC_RCTL, XXXXXXX, KC_LEFT, KC_DOWN, KC_RGHT),
+
+  /* Keymap Fn Layer
+   * ,----------------------------------------------------------------.
+   * |Rst| F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12|   |   |Ins |
+   * |----------------------------------------------------------------|
+   * |     |M- |M+ |RGB|H- |H+ |   |   |Prt|SLk|Pau|   |   |     |    |
+   * |------------------------------------------------------.    |----|
+   * |Caps  |Vo-|Vo+|Mut|S- |S+ |  *|  /|Hom|PUp|   |   |   |    |    |
+   * |----------------------------------------------------------------|
+   * |        |BL-|BL+|BL |V- |V+ |  +|  -|End|PDn|  _|      |PUp|    |
+   * |----------------------------------------------------------------|
+   * |    |    |    | Muhenkan |   | Henkan |Kana|Menu|  |Hom|PDn|End |
+   * `------------------------------------------------'  `------------'
+   */
+[1] = LAYOUT_all(
+   RESET,  KC_F1,  KC_F2,  KC_F3,  KC_F4,  KC_F5,  KC_F6,  KC_F7,  KC_F8,  KC_F9,  KC_F10, KC_F11, KC_F12, XXXXXXX,_______,KC_INS,  \
+   _______,   RGB_RMO,RGB_MOD,RGB_TOG,RGB_HUD,RGB_HUI,XXXXXXX,XXXXXXX,KC_PSCR,KC_SLCK,KC_PAUS,XXXXXXX,XXXXXXX,XXXXXXX,     _______, \
+   KC_CAPS,     KC_VOLD,KC_VOLU,KC_MUTE,RGB_SAD,RGB_SAI,KC_PAST,KC_PSLS,KC_HOME,KC_PGUP,XXXXXXX,XXXXXXX,      KC_PENT,     _______, \
+   _______,_______,BL_DEC, BL_INC, BL_TOGG,RGB_VAD,RGB_VAI,KC_PPLS,KC_PMNS,KC_END, KC_PGDN,JP_UNDS,_______,        KC_PGUP,_______, \
+   _______,_______,_______,        KC_MHEN,        _______,        KC_HENK,        KC_KANA,KC_APP, _______,KC_HOME,KC_PGDN,KC_END),
+};
--- a/keyboards/kbdfans/kbd67/rev2/keymaps/koba/readme.md
+++ b/keyboards/kbdfans/kbd67/rev2/keymaps/koba/readme.md
@@ -0,0 +1,7 @@
+# Koba's keymap for KBD67
+
+![keyboard-layout](https://user-images.githubusercontent.com/1042121/54736578-244ffe80-4bef-11e9-9882-37611b4efdf4.png)
+
+- JIS layout.
+- Fn layer is arranged like HHKB.
+- 3 splitted space bar. (Space-Fn-Space)
--- a/keyboards/kbdfans/kbd67/rev2/readme.md
+++ b/keyboards/kbdfans/kbd67/rev2/readme.md
@@ -0,0 +1,13 @@
+# KBD67 rev2
+
+65% pcb with blocker. Revision 2 (Manufactured after 05/01/19). 
+
+Keyboard Maintainer: [Vorror](https://github.com/vorror)  
+Hardware Supported: KBD67v2 PCB (Sometimes sold under the name "KBD65")  
+Hardware Availability: KBDFans [Keyboard Kit](https://kbdfans.cn/products/coming-soon-kbd67-mechanical-keyboard-diy-kit), [PCB](https://kbdfans.cn/collections/65/products/kbd65-65-custom-mechanical-keyboard-pcb)
+
+Make example for this keyboard (after setting up your build environment):
+
+    make kbdfans/kbd67/rev2:default
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
--- a/keyboards/kbdfans/kbd67/rev2/rev2.c
+++ b/keyboards/kbdfans/kbd67/rev2/rev2.c
@@ -0,0 +1,42 @@
+/* Copyright 2019 Vorror
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include "rev2.h"
+
+void matrix_init_kb(void) {
+	// put your keyboard start-up code here
+	// runs once when the firmware starts up
+
+	matrix_init_user();
+}
+
+void matrix_scan_kb(void) {
+	// put your looping keyboard code here
+	// runs every cycle (a lot)
+
+	matrix_scan_user();
+}
+
+bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
+	// put your per-action keyboard code here
+	// runs for every action, just before processing by the firmware
+
+	return process_record_user(keycode, record);
+}
+
+void led_set_kb(uint8_t usb_led) {
+	// put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
+	led_set_user(usb_led);
+}
--- a/keyboards/kbdfans/kbd67/rev2/rev2.h
+++ b/keyboards/kbdfans/kbd67/rev2/rev2.h
@@ -0,0 +1,57 @@
+/* Copyright 2018 MechMerlin
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#pragma once
+
+#include "quantum.h"
+
+/* This a shortcut to help you visually see your layout.
+ *
+ * The first section contains all of the arguments representing the physical
+ * layout of the board and position of the keys.
+ *
+ * The second converts the arguments into a two-dimensional array which
+ * represents the switch matrix.
+ */
+#define LAYOUT_all( \
+    K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E, K0F, \
+    K10,      K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E, K1F, \
+    K20,      K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D,      K2F, \
+    K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B,      K3D, K3E, K3F, \
+    K40, K41,      K43, K44,      K46,      K48,      K4A, K4B, K4C, K4D, K4E, K4F  \
+) \
+{ \
+    { K00, K01,   K02,   K03, K04, K05,   K06, K07,   K08, K09,   K0A, K0B, K0C,   K0D, K0E,   K0F }, \
+    { K10, KC_NO, K12,   K13, K14, K15,   K16, K17,   K18, K19,   K1A, K1B, K1C,   K1D, K1E,   K1F }, \
+    { K20, KC_NO, K22,   K23, K24, K25,   K26, K27,   K28, K29,   K2A, K2B, K2C,   K2D, KC_NO, K2F }, \
+    { K30, K31,   K32,   K33, K34, K35,   K36, K37,   K38, K39,   K3A, K3B, KC_NO, K3D, K3E,   K3F }, \
+    { K40, K41,   KC_NO, K43, K44, KC_NO, K46, KC_NO, K48, KC_NO, K4A, K4B, K4C,   K4D, K4E,   K4F }, \
+}
+
+#define LAYOUT_65_ansi( \
+    K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C,      K0E, K0F, \
+    K10,      K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E, K1F, \
+    K20,      K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D,      K2F, \
+    K30,      K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B,      K3D, K3E, K3F, \
+    K40, K41,      K43,           K46,                K4A, K4B, K4C, K4D, K4E, K4F  \
+) \
+{ \
+    { K00, K01,   K02,   K03, K04,   K05,   K06, K07,   K08,   K09,   K0A, K0B, K0C,   KC_NO, K0E,   K0F }, \
+    { K10, KC_NO, K12,   K13, K14,   K15,   K16, K17,   K18,   K19,   K1A, K1B, K1C,   K1D,   K1E,   K1F }, \
+    { K20, KC_NO, K22,   K23, K24,   K25,   K26, K27,   K28,   K29,   K2A, K2B, K2C,   K2D,   KC_NO, K2F }, \
+    { K30, KC_NO, K32,   K33, K34,   K35,   K36, K37,   K38,   K39,   K3A, K3B, KC_NO, K3D,   K3E,   K3F }, \
+    { K40, K41,   KC_NO, K43, KC_NO, KC_NO, K46, KC_NO, KC_NO, KC_NO, K4A, K4B, K4C,   K4D,   K4E,   K4F }, \
+}
+
--- a/keyboards/kbdfans/kbd67/rev2/rules.mk
+++ b/keyboards/kbdfans/kbd67/rev2/rules.mk
@@ -0,0 +1,82 @@
+# MCU name
+MCU = atmega32u4
+
+# Processor frequency.
+#     This will define a symbol, F_CPU, in all source code files equal to the
+#     processor frequency in Hz. You can then use this symbol in your source code to
+#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+#     automatically to create a 32-bit value in your source code.
+#
+#     This will be an integer division of F_USB below, as it is sourced by
+#     F_USB after it has run through any CPU prescalers. Note that this value
+#     does not *change* the processor frequency - it should merely be updated to
+#     reflect the processor speed set externally so that the code can use accurate
+#     software delays.
+F_CPU = 16000000
+
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+#     This will define a symbol, F_USB, in all source code files equal to the
+#     input clock frequency (before any prescaling is performed) in Hz. This value may
+#     differ from F_CPU if prescaling is used on the latter, and is required as the
+#     raw input clock is fed directly to the PLL sections of the AVR for high speed
+#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+#     at the end, this will be done automatically to create a 32-bit value in your
+#     source code.
+#
+#     If no clock division is performed on the input clock inside the AVR (via the
+#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+
+# Bootloader selection
+#   Teensy       halfkay
+#   Pro Micro    caterina
+#   Atmel DFU    atmel-dfu
+#   LUFA DFU     lufa-dfu
+#   QMK DFU      qmk-dfu
+#   atmega32a    bootloadHID
+BOOTLOADER = atmel-dfu
+
+
+# If you don't know the bootloader type, then you can specify the
+# Boot Section Size in *bytes* by uncommenting out the OPT_DEFS line
+#   Teensy halfKay      512
+#   Teensy++ halfKay    1024
+#   Atmel DFU loader    4096
+#   LUFA bootloader     4096
+#   USBaspLoader        2048
+# OPT_DEFS += -DBOOTLOADER_SIZE=4096
+
+
+# Build Options
+#   change yes to no to disable
+#
+BOOTMAGIC_ENABLE = lite     # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
+CONSOLE_ENABLE = yes        # Console for debug(+400)
+COMMAND_ENABLE = no        # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = no            # USB Nkey Rollover
+BACKLIGHT_ENABLE = yes       # Enable keyboard backlight functionality on B7 by default
+RGBLIGHT_ENABLE = yes        # Enable keyboard RGB underglow
+MIDI_ENABLE = no            # MIDI support (+2400 to 4200, depending on config)
+UNICODE_ENABLE = no         # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+AUDIO_ENABLE = no           # Audio output on port C6
+FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
+HD44780_ENABLE = no 		# Enable support for HD44780 based LCDs (+400)
+
+LAYOUTS = 65_ansi
--- a/keyboards/nek_type_a/config.h
+++ b/keyboards/nek_type_a/config.h
@@ -0,0 +1,55 @@
+/*
+Copyright 2018 Mike Roberts
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0xFEED
+#define PRODUCT_ID      0x0000
+#define DEVICE_VER      0x0001
+#define MANUFACTURER    miker
+#define PRODUCT         nek_type_a
+#define DESCRIPTION     NEK Type A
+
+/* key matrix size */
+#define MATRIX_ROWS 6
+#define MATRIX_COLS 18
+
+/* left columns are all onboard, right columns all on expander */
+#define COL_EXPANDED { false, false, false, false, false, false, false, true, true, true, true, true, true, true, true, true, true, true}
+#define MATRIX_COL_PINS { C6, D7, B5, B6, B7, D6, D3, GPA0, GPA1, GPA2, GPA3, GPA4, GPA5, GPA6, GPA7, GPB0, GPB1, GPB2 }
+#define MATRIX_ROW_PINS { F7, F6, F5, F4, F1, F0 }
+
+#define DIODE_DIRECTION ROW2COL
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCING_DELAY 5
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* key combination for magic key command */
+#define IS_COMMAND() ( \
+    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
+)
+
+
--- a/keyboards/nek_type_a/info.json
+++ b/keyboards/nek_type_a/info.json
--- a/keyboards/nek_type_a/keymaps/default/config.h
+++ b/keyboards/nek_type_a/keymaps/default/config.h
@@ -0,0 +1,19 @@
+/* Copyright 2018 Mike Roberts
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+// place overrides here
--- a/keyboards/nek_type_a/keymaps/default/keymap.c
+++ b/keyboards/nek_type_a/keymaps/default/keymap.c
@@ -0,0 +1,39 @@
+/* Copyright 2018 Mike Roberts
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+  [0] = LAYOUT(
+    KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC__MUTE, KC__VOLDOWN, KC__VOLUP, \
+    KC_GRAVE, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINUS, KC_EQUAL, KC_BSPACE, KC_INSERT, KC_HOME, KC_PGUP, \
+    KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRACKET, KC_RBRACKET, KC_BSLASH, KC_DELETE, KC_END, KC_PGDOWN, \
+    KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCOLON, KC_QUOTE, KC_ENTER, \
+    KC_LSHIFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMMA, KC_DOT, KC_SLASH, KC_RSHIFT, KC_UP, \
+    KC_LCTRL, KC_LALT, KC_LCMD, KC_SPC, KC_SPC, KC_RCMD, KC_RALT, KC_RCTRL, KC_APP, KC_LEFT, KC_DOWN, KC_RIGHT \
+  ),
+};
+
+void matrix_init_user(void) {
+
+}
+
+void matrix_scan_user(void) {
+
+}
+
+void led_set_user(uint8_t usb_led) {
+
+}
--- a/keyboards/nek_type_a/keymaps/default/readme.md
+++ b/keyboards/nek_type_a/keymaps/default/readme.md
@@ -0,0 +1,3 @@
+![NEK Type A Layout](https://i.imgur.com/ElEVvze.png)
+
+# Default NEK Type A Keymap
--- a/keyboards/nek_type_a/matrix.c
+++ b/keyboards/nek_type_a/matrix.c
@@ -0,0 +1,412 @@
+/*
+Copyright 2012-2018 Jun Wako, Jack Humbert, Mike Roberts
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+/*
+ * This matrix.c has been hacked up to support some columns being on an ex pander in ROW2COL mode.
+ * The columns are only ever selected and unselected, never read. Unselecting a single column via the expander is not
+ * implemented because updating one column costs the same as updating all the columns in a bank. Currently both banks
+ * are unselected but two i2c transactions could be removed if we only unselect the the proper half.
+ */
+
+#include <stdint.h>
+#include <stdbool.h>
+#if defined(__AVR__)
+#include <avr/io.h>
+#endif
+#include "wait.h"
+#include "print.h"
+#include "debug.h"
+#include "util.h"
+#include "matrix.h"
+#include "timer.h"
+#include "mcp23017.h"
+#include "outputselect.h"
+
+/* Set 0 if debouncing isn't needed */
+
+#ifndef DEBOUNCING_DELAY
+#   define DEBOUNCING_DELAY 5
+#endif
+
+#if (DEBOUNCING_DELAY > 0)
+    static uint16_t debouncing_time;
+    static bool debouncing = false;
+#endif
+
+#if (MATRIX_COLS <= 8)
+#    define print_matrix_header()  print("\nr/c 01234567\n")
+#    define print_matrix_row(row)  print_bin_reverse8(matrix_get_row(row))
+#    define matrix_bitpop(i)       bitpop(matrix[i])
+#    define ROW_SHIFTER ((uint8_t)1)
+#elif (MATRIX_COLS <= 16)
+#    define print_matrix_header()  print("\nr/c 0123456789ABCDEF\n")
+#    define print_matrix_row(row)  print_bin_reverse16(matrix_get_row(row))
+#    define matrix_bitpop(i)       bitpop16(matrix[i])
+#    define ROW_SHIFTER ((uint16_t)1)
+#elif (MATRIX_COLS <= 32)
+#    define print_matrix_header()  print("\nr/c 0123456789ABCDEF0123456789ABCDEF\n")
+#    define print_matrix_row(row)  print_bin_reverse32(matrix_get_row(row))
+#    define matrix_bitpop(i)       bitpop32(matrix[i])
+#    define ROW_SHIFTER  ((uint32_t)1)
+#endif
+
+#ifdef MATRIX_MASKED
+    extern const matrix_row_t matrix_mask[];
+#endif
+
+#if (DIODE_DIRECTION == ROW2COL) || (DIODE_DIRECTION == COL2ROW)
+static const uint8_t row_pins[MATRIX_ROWS] = MATRIX_ROW_PINS;
+static const uint8_t col_pins[MATRIX_COLS] = MATRIX_COL_PINS;
+static const bool col_expanded[MATRIX_COLS] = COL_EXPANDED;
+#endif
+
+/* matrix state(1:on, 0:off) */
+static matrix_row_t matrix[MATRIX_ROWS];
+
+static matrix_row_t matrix_debouncing[MATRIX_ROWS];
+
+
+#if (DIODE_DIRECTION == COL2ROW)
+    static void init_cols(void);
+    static bool read_cols_on_row(matrix_row_t current_matrix[], uint8_t current_row);
+    static void unselect_rows(void);
+    static void select_row(uint8_t row);
+    static void unselect_row(uint8_t row);
+#elif (DIODE_DIRECTION == ROW2COL)
+    static void init_rows(void);
+    static bool read_rows_on_col(matrix_row_t current_matrix[], uint8_t current_col);
+    static void unselect_cols(void);
+    static void unselect_col(uint8_t col);
+    static void select_col(uint8_t col);
+#endif
+
+__attribute__ ((weak))
+void matrix_init_quantum(void) {
+    expander_init();
+    matrix_init_kb();
+}
+
+__attribute__ ((weak))
+void matrix_scan_quantum(void) {
+    matrix_scan_kb();
+}
+
+__attribute__ ((weak))
+void matrix_init_kb(void) {
+    matrix_init_user();
+}
+
+__attribute__ ((weak))
+void matrix_scan_kb(void) {
+    matrix_scan_user();
+}
+
+__attribute__ ((weak))
+void matrix_init_user(void) {
+}
+
+__attribute__ ((weak))
+void matrix_scan_user(void) {
+}
+
+inline
+uint8_t matrix_rows(void) {
+    return MATRIX_ROWS;
+}
+
+inline
+uint8_t matrix_cols(void) {
+    return MATRIX_COLS;
+}
+
+void matrix_init(void) {
+    // initialize row and col
+#if (DIODE_DIRECTION == COL2ROW)
+    unselect_rows();
+    init_cols();
+#elif (DIODE_DIRECTION == ROW2COL)
+    unselect_cols();
+    init_rows();
+#endif
+
+    // initialize matrix state: all keys off
+    for (uint8_t i=0; i < MATRIX_ROWS; i++) {
+        matrix[i] = 0;
+        matrix_debouncing[i] = 0;
+    }
+
+    matrix_init_quantum();
+    set_output(OUTPUT_AUTO);
+}
+
+uint8_t matrix_scan(void)
+{
+
+#if (DIODE_DIRECTION == COL2ROW)
+
+    // Set row, read cols
+    for (uint8_t current_row = 0; current_row < MATRIX_ROWS; current_row++) {
+#       if (DEBOUNCING_DELAY > 0)
+            bool matrix_changed = read_cols_on_row(matrix_debouncing, current_row);
+
+            if (matrix_changed) {
+                debouncing = true;
+                debouncing_time = timer_read();
+            }
+
+#       else
+            read_cols_on_row(matrix, current_row);
+#       endif
+
+    }
+
+#elif (DIODE_DIRECTION == ROW2COL)
+
+    // Set col, read rows
+    for (uint8_t current_col = 0; current_col < MATRIX_COLS; current_col++) {
+#       if (DEBOUNCING_DELAY > 0)
+            bool matrix_changed = read_rows_on_col(matrix_debouncing, current_col);
+            if (matrix_changed) {
+                debouncing = true;
+                debouncing_time = timer_read();
+            }
+#       else
+             read_rows_on_col(matrix, current_col);
+#       endif
+
+    }
+
+#endif
+
+#   if (DEBOUNCING_DELAY > 0)
+        if (debouncing && (timer_elapsed(debouncing_time) > DEBOUNCING_DELAY)) {
+            for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
+                matrix[i] = matrix_debouncing[i];
+            }
+            debouncing = false;
+        }
+#   endif
+
+    matrix_scan_quantum();
+    return 1;
+}
+
+bool matrix_is_modified(void)
+{
+#if (DEBOUNCING_DELAY > 0)
+    if (debouncing) return false;
+#endif
+    return true;
+}
+
+inline
+bool matrix_is_on(uint8_t row, uint8_t col)
+{
+    return (matrix[row] & ((matrix_row_t)1<col));
+}
+
+inline
+matrix_row_t matrix_get_row(uint8_t row)
+{
+    // Matrix mask lets you disable switches in the returned matrix data. For example, if you have a
+    // switch blocker installed and the switch is always pressed.
+#ifdef MATRIX_MASKED
+    return matrix[row] & matrix_mask[row];
+#else
+    return matrix[row];
+#endif
+}
+
+void matrix_print(void)
+{
+    print_matrix_header();
+
+    for (uint8_t row = 0; row < MATRIX_ROWS; row++) {
+        phex(row); print(": ");
+        print_matrix_row(row);
+        print("\n");
+    }
+}
+
+uint8_t matrix_key_count(void)
+{
+    uint8_t count = 0;
+    for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
+        count += matrix_bitpop(i);
+    }
+    return count;
+}
+
+
+
+#if (DIODE_DIRECTION == COL2ROW)
+
+static void init_cols(void)
+{
+    for(uint8_t x = 0; x < MATRIX_COLS; x++) {
+        uint8_t pin = col_pins[x];
+        _SFR_IO8((pin >> 4) + 1) &= ~_BV(pin & 0xF); // IN
+        _SFR_IO8((pin >> 4) + 2) |=  _BV(pin & 0xF); // HI
+    }
+}
+
+static bool read_cols_on_row(matrix_row_t current_matrix[], uint8_t current_row)
+{
+    // Store last value of row prior to reading
+    matrix_row_t last_row_value = current_matrix[current_row];
+
+    // Clear data in matrix row
+    current_matrix[current_row] = 0;
+
+    // Select row and wait for row selecton to stabilize
+    select_row(current_row);
+    wait_us(30);
+
+    // For each col...
+    for(uint8_t col_index = 0; col_index < MATRIX_COLS; col_index++) {
+
+        // Select the col pin to read (active low)
+        uint8_t pin = col_pins[col_index];
+        uint8_t pin_state = (_SFR_IO8(pin >> 4) & _BV(pin & 0xF));
+
+        // Populate the matrix row with the state of the col pin
+        current_matrix[current_row] |=  pin_state ? 0 : (ROW_SHIFTER << col_index);
+    }
+
+    // Unselect row
+    unselect_row(current_row);
+
+    return (last_row_value != current_matrix[current_row]);
+}
+
+static void select_row(uint8_t row)
+{
+    uint8_t pin = row_pins[row];
+    _SFR_IO8((pin >> 4) + 1) |=  _BV(pin & 0xF); // OUT
+    _SFR_IO8((pin >> 4) + 2) &= ~_BV(pin & 0xF); // LOW
+}
+
+static void unselect_row(uint8_t row)
+{
+    uint8_t pin = row_pins[row];
+    _SFR_IO8((pin >> 4) + 1) &= ~_BV(pin & 0xF); // IN
+    _SFR_IO8((pin >> 4) + 2) |=  _BV(pin & 0xF); // HI
+}
+
+static void unselect_rows(void)
+{
+    for(uint8_t x = 0; x < MATRIX_ROWS; x++) {
+        uint8_t pin = row_pins[x];
+        _SFR_IO8((pin >> 4) + 1) &= ~_BV(pin & 0xF); // IN
+        _SFR_IO8((pin >> 4) + 2) |=  _BV(pin & 0xF); // HI
+    }
+}
+
+#elif (DIODE_DIRECTION == ROW2COL)
+
+static void init_rows(void)
+{
+    for(uint8_t x = 0; x < MATRIX_ROWS; x++) {
+        uint8_t pin = row_pins[x];
+        _SFR_IO8((pin >> 4) + 1) &= ~_BV(pin & 0xF); // IN
+        _SFR_IO8((pin >> 4) + 2) |=  _BV(pin & 0xF); // HI
+    }
+}
+
+static bool read_rows_on_col(matrix_row_t current_matrix[], uint8_t current_col)
+{
+    bool matrix_changed = false;
+
+    // Select col and wait for col selecton to stabilize
+    select_col(current_col);
+    wait_us(30);
+
+    // For each row...
+    for(uint8_t row_index = 0; row_index < MATRIX_ROWS; row_index++)
+    {
+        // Store last value of row prior to reading
+        matrix_row_t last_row_value = current_matrix[row_index];
+
+        // Check row pin state
+        if ((_SFR_IO8(row_pins[row_index] >> 4) & _BV(row_pins[row_index] & 0xF)) == 0)
+        {
+            // Pin LO, set col bit
+            current_matrix[row_index] |= (ROW_SHIFTER << current_col);
+        }
+        else
+        {
+            // Pin HI, clear col bit
+            current_matrix[row_index] &= ~(ROW_SHIFTER << current_col);
+        }
+
+        // Determine if the matrix changed state
+        if ((last_row_value != current_matrix[row_index]) && !(matrix_changed))
+        {
+            matrix_changed = true;
+        }
+    }
+
+    // Unselect col
+    unselect_col(current_col);
+
+    return matrix_changed;
+}
+
+static void select_col(uint8_t col)
+{
+    uint8_t pin = col_pins[col];
+    if (col_expanded[col])
+    {
+        expander_select(pin);
+    }
+    else
+    {
+        _SFR_IO8((pin >> 4) + 1) |=  _BV(pin & 0xF); // OUT
+        _SFR_IO8((pin >> 4) + 2) &= ~_BV(pin & 0xF); // LOW
+    }
+}
+
+
+static void unselect_col(uint8_t col)
+{
+    uint8_t pin = col_pins[col];
+    if (col_expanded[col])
+    {
+        expander_unselect_all();
+    }
+    else
+    {
+        _SFR_IO8((pin >> 4) + 1) &= ~_BV(pin & 0xF); // IN
+        _SFR_IO8((pin >> 4) + 2) |=  _BV(pin & 0xF); // HI
+    }
+}
+
+static void unselect_cols(void)
+{
+    expander_unselect_all();
+
+    for(uint8_t col = 0; col < MATRIX_COLS; col++) {
+        uint8_t pin = col_pins[col];
+        if (!col_expanded[col])
+        {
+            _SFR_IO8((pin >> 4) + 1) &= ~_BV(pin & 0xF); // IN
+            _SFR_IO8((pin >> 4) + 2) |=  _BV(pin & 0xF); // HI
+        }
+    }
+}
+
+#endif
--- a/keyboards/nek_type_a/mcp23017.c
+++ b/keyboards/nek_type_a/mcp23017.c
@@ -0,0 +1,107 @@
+/* Copyright 2018 Mike Roberts
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include <stdbool.h>
+#include "action.h"
+#include "lib/lufa/LUFA/Drivers/Peripheral/TWI.h"
+#include "lib/lufa/LUFA/Drivers/Peripheral/AVR8/TWI_AVR8.c"
+#include "mcp23017.h"
+#include "debug.h"
+#include "wait.h"
+
+uint8_t bit_for_pin(uint8_t pin);
+
+uint8_t expander_write(uint8_t reg, uint8_t data);
+
+uint8_t expander_read(uint8_t reg, uint8_t *data);
+
+void expander_config(void);
+
+static const char *twi_err_str(uint8_t res) {
+    switch (res) {
+        case TWI_ERROR_NoError:
+            return "OK";
+        case TWI_ERROR_BusFault:
+            return "BUSFAULT";
+        case TWI_ERROR_BusCaptureTimeout:
+            return "BUSTIMEOUT";
+        case TWI_ERROR_SlaveResponseTimeout:
+            return "SLAVETIMEOUT";
+        case TWI_ERROR_SlaveNotReady:
+            return "SLAVENOTREADY";
+        case TWI_ERROR_SlaveNAK:
+            return "SLAVENAK";
+        default:
+            return "UNKNOWN";
+    }
+}
+
+void expander_init(void) {
+    TWI_Init(TWI_BIT_PRESCALE_1, TWI_BITLENGTH_FROM_FREQ(1, 400000));
+}
+
+// set IN and HI
+void expander_unselect_all() {
+    expander_write(EXPANDER_REG_IODIRA, 0xff);
+    expander_write(EXPANDER_REG_IODIRB, 0xff);
+    expander_write(EXPANDER_REG_OLATA, 0xff);
+    expander_write(EXPANDER_REG_OLATB, 0xff);
+    wait_us(EXPANDER_PAUSE);
+}
+
+// set OUT and LOW
+void expander_select(uint8_t pin) {
+    const uint8_t mask = 0xff & ~(1 << bit_for_pin(pin));
+    if (pin < 8) {
+        expander_write(EXPANDER_REG_IODIRA, mask);
+        expander_write(EXPANDER_REG_OLATA, mask);
+    } else {
+        expander_write(EXPANDER_REG_IODIRB, mask);
+        expander_write(EXPANDER_REG_OLATB, mask);
+    }
+    wait_us(EXPANDER_PAUSE);
+}
+
+void expander_config() {
+    // set everything to input
+    expander_write(EXPANDER_REG_IODIRA, 0xff);
+    expander_write(EXPANDER_REG_IODIRB, 0xff);
+
+    // turn on pull-ups
+    expander_write(EXPANDER_REG_GPPUA, 0xff);
+    expander_write(EXPANDER_REG_GPPUB, 0xff);
+
+    // disable interrupts
+    expander_write(EXPANDER_REG_GPINTENA, 0x0);
+    expander_write(EXPANDER_REG_GPINTENB, 0x0);
+
+    // polarity
+    expander_write(EXPANDER_REG_IPOLA, 0x0);
+    expander_write(EXPANDER_REG_IPOLB, 0x0);
+}
+
+uint8_t bit_for_pin(uint8_t pin) {
+    return pin % 8;
+}
+
+uint8_t expander_write(uint8_t reg, unsigned char val) {
+    uint8_t addr = reg;
+    uint8_t result = TWI_WritePacket(EXPANDER_ADDR << 1, I2C_TIMEOUT, &addr, sizeof(addr), &val, sizeof(val));
+    if (result) {
+        xprintf("mcp: set_register %d = %d failed: %s\n", reg, val, twi_err_str(result));
+    }
+    return result == 0;
+}
+
--- a/keyboards/nek_type_a/mcp23017.h
+++ b/keyboards/nek_type_a/mcp23017.h
@@ -0,0 +1,71 @@
+/* Copyright 2018 Mike Roberts
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#ifndef MAP23017_H
+#define MAP23017_H
+
+#define EXPANDER_ADDR 0x27
+#define I2C_TIMEOUT 200 // milliseconds
+#define EXPANDER_PAUSE 0 // microseconds
+
+enum EXPANDER_REGISTERS {
+    EXPANDER_REG_IODIRA = 0x00,
+    EXPANDER_REG_IODIRB = 0x01,
+    EXPANDER_REG_IPOLA = 0x02,
+    EXPANDER_REG_IPOLB = 0x03,
+    EXPANDER_REG_GPINTENA = 0x04,
+    EXPANDER_REG_GPINTENB = 0x05,
+    EXPANDER_REG_DEFVALA = 0x06,
+    EXPANDER_REG_DEFVALB = 0x07,
+    EXPANDER_REG_INTCONA = 0x08,
+    EXPANDER_REG_INTCONB = 0x09,
+    EXPANDER_REG_IOCONA = 0x0A,
+    EXPANDER_REG_IOCONB = 0x0B,
+    EXPANDER_REG_GPPUA = 0x0C,
+    EXPANDER_REG_GPPUB = 0x0D,
+    EXPANDER_REG_INTFA = 0x0E,
+    EXPANDER_REG_INTFB = 0x0F,
+    EXPANDER_REG_INTCAPA = 0x10,
+    EXPANDER_REG_INTCAPB = 0x11,
+    EXPANDER_REG_GPIOA = 0x12,
+    EXPANDER_REG_GPIOB = 0x13,
+    EXPANDER_REG_OLATA = 0x14,
+    EXPANDER_REG_OLATB = 0x15
+};
+
+#define GPA0 0x0
+#define GPA1 0x1
+#define GPA2 0x2
+#define GPA3 0x3
+#define GPA4 0x4
+#define GPA5 0x5
+#define GPA6 0x6
+#define GPA7 0x7
+#define GPB0 0x8
+#define GPB1 0x9
+#define GPB2 0xA
+#define GPB3 0xB
+#define GPB4 0xC
+#define GPB5 0xD
+#define GPB6 0xE
+#define GPB7 0xF
+
+
+void expander_init(void);
+void expander_select(uint8_t pin);
+void expander_unselect(uint8_t pin);
+void expander_unselect_all(void);
+
+#endif
--- a/keyboards/nek_type_a/nek_type_a.c
+++ b/keyboards/nek_type_a/nek_type_a.c
@@ -0,0 +1,43 @@
+/* Copyright 2018 Mike Roberts
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include "nek_type_a.h"
+
+void matrix_init_kb(void) {
+	// put your keyboard start-up code here
+	// runs once when the firmware starts up
+
+	matrix_init_user();
+}
+
+void matrix_scan_kb(void) {
+	// put your looping keyboard code here
+	// runs every cycle (a lot)
+
+	matrix_scan_user();
+}
+
+bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
+	// put your per-action keyboard code here
+	// runs for every action, just before processing by the firmware
+
+	return process_record_user(keycode, record);
+}
+
+void led_set_kb(uint8_t usb_led) {
+	// put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
+
+	led_set_user(usb_led);
+}
--- a/keyboards/nek_type_a/nek_type_a.h
+++ b/keyboards/nek_type_a/nek_type_a.h
@@ -0,0 +1,58 @@
+/* Copyright 2018 REPLACE_WITH_YOUR_NAME
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#ifndef NEK_TYPE_A_H
+#define NEK_TYPE_A_H
+
+#include "quantum.h"
+#include <stdint.h>
+#include <stdbool.h>
+#include <util/delay.h>
+
+#define I2C_ADDR        0b0100000
+#define I2C_ADDR_WRITE  ( (I2C_ADDR<<1) | I2C_WRITE )
+#define I2C_ADDR_READ   ( (I2C_ADDR<<1) | I2C_READ  )
+#define IODIRA          0x00            // i/o direction register
+#define IODIRB          0x01
+#define GPPUA           0x0C            // GPIO pull-up resistor register
+#define GPPUB           0x0D
+#define GPIOA           0x12            // general purpose i/o port register (write modifies OLAT)
+#define GPIOB           0x13
+#define OLATA           0x14            // output latch register
+#define OLATB           0x15
+
+extern uint8_t expander_status;
+extern uint8_t expander_input_pin_mask;
+extern bool i2c_initialized;
+
+void init_expander(void);
+
+#define LAYOUT( \
+         L12,      L14, L15, L16, L17,   R11, R12, R13, R14, R15, R16, R17, R18, R19, R1A, R1B, \
+    L21, L22, L23, L24, L25, L26, L27,   R21, R22, R23, R24, R25, R26,      R28, R29, R2A, R2B, \
+    L31, L32, L33, L34, L35, L36,        R31, R32, R33, R34, R35, R36, R37, R38, R39, R3A, R3B, \
+    L41, L42, L43, L44, L45, L46,        R41, R42, R43, R44, R45, R46,      R48,                \
+    L51, L52, L53, L54, L55, L56,        R51, R52, R53, R54, R55,           R58,      R5A,      \
+    L61, L62, L63,      L65,             R61,      R63,      R65, R66,      R68, R69, R6A, R6B  \
+) \
+{ \
+    { KC_NO,   L12, KC_NO,   L14,   L15,   L16,   L17,   R11,   R12,   R13,   R14,   R15,   R16,   R17,   R18,   R19,   R1A,   R1B }, \
+    {   L21,   L22,   L23,   L24,   L25,   L26,   L27,   R21,   R22,   R23,   R24,   R25,   R26, KC_NO,   R28,   R29,   R2A,   R2B }, \
+    {   L31,   L32,   L33,   L34,   L35,   L36, KC_NO,   R31,   R32,   R33,   R34,   R35,   R36,   R37,   R38,   R39,   R3A,   R3B }, \
+    {   L41,   L42,   L43,   L44,   L45,   L46, KC_NO,   R41,   R42,   R43,   R44,   R45,   R46, KC_NO,   R48, KC_NO, KC_NO, KC_NO }, \
+    {   L51,   L52,   L53,   L54,   L55,   L56, KC_NO,   R51,   R52,   R53,   R54,   R55, KC_NO, KC_NO,   R58, KC_NO,   R5A, KC_NO }, \
+    {   L61,   L62,   L63, KC_NO,   L65, KC_NO, KC_NO,   R61, KC_NO,   R63, KC_NO,   R65,   R66, KC_NO,   R68,   R69,   R6A,   R6B }, \
+}
+#endif
--- a/keyboards/nek_type_a/readme.md
+++ b/keyboards/nek_type_a/readme.md
@@ -0,0 +1,30 @@
+# nek_type_a
+
+![NEK Type A Keyboard](https://i.imgur.com/XFnjlQ9.jpg)
+
+Natural Ergonomic Keyboard, Type A
+
+Keyboard Maintainer: [Mike Roberts](https://github.com/ecopoesis)  
+Hardware Supported: Custom PCBs from https://github.com/ecopoesis/nek-type-a  
+Hardware Availability: https://github.com/ecopoesis/nek-type-a  
+
+## Design
+
+This is a column-driven split keyboard using three custom PCBs connected with ribbon cables. The left and right PCBs are
+passive: they only have the diodes and switches needed to make the matrix. The center PCB has an Adafruit Feather 32u4 and
+MCP23017 expander.
+
+The left matrix has its rows and columns directly connected to the Feather. The right matrix has its rows connect to the
+Feather (using the same pins as the left matrix) and its columns connected to the expander. The expander uses the LUFA
+hardware TWI driver.
+
+Bluetooth is enabled.
+
+## Building
+
+Make and install this keyboard (after setting up your build environment):
+```
+make nek_type_a:default:avrdude
+```
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
--- a/keyboards/nek_type_a/rules.mk
+++ b/keyboards/nek_type_a/rules.mk
@@ -0,0 +1,33 @@
+SRC = matrix.c mcp23017.c
+
+MCU = atmega32u4
+F_CPU = 8000000
+
+ARCH = AVR8
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+BOOTLOADER = caterina
+
+BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = no       # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
+CONSOLE_ENABLE = yes        # Console for debug(+400)
+COMMAND_ENABLE = yes        # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = no            # USB Nkey Rollover
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality on B7 by default
+RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
+MIDI_ENABLE = no            # MIDI support (+2400 to 4200, depending on config)
+UNICODE_ENABLE = no         # Unicode
+BLUETOOTH_ENABLE = yes      # Enable Bluetooth with the Adafruit EZ-Key HID
+AUDIO_ENABLE = no           # Audio output on port C6
+FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
+HD44780_ENABLE = no 		# Enable support for HD44780 based LCDs (+400)
+CUSTOM_MATRIX = yes
+DEBUG_ENABLE = yes
+BLUETOOTH = AdafruitBLE
--- a/keyboards/z150_blackheart/info.json
+++ b/keyboards/z150_blackheart/info.json
@@ -0,0 +1,191 @@
+{
+    "keyboard_name": "Z-150 Blackheart",
+    "url": "",
+    "maintainer": "qmk, blindassassin111",
+    "width": 21.25,
+    "height": 5,
+    "layouts": {
+        "LAYOUT": {
+            "key_count": 84,
+            "layout": [
+                {"label":"F1", "x":0, "y":0},
+                {"label":"F2", "x":1, "y":0},
+                {"label":"Esc", "x":2.5, "y":0},
+                {"label":"!", "x":3.5, "y":0},
+                {"label":"@", "x":4.5, "y":0},
+                {"label":"#", "x":5.5, "y":0},
+                {"label":"$", "x":6.5, "y":0},
+                {"label":"%", "x":7.5, "y":0},
+                {"label":"^", "x":8.5, "y":0},
+                {"label":"&", "x":9.5, "y":0},
+                {"label":"*", "x":10.5, "y":0},
+                {"label":"(", "x":11.5, "y":0},
+                {"label":")", "x":12.5, "y":0},
+                {"label":"_", "x":13.5, "y":0},
+                {"label":"+", "x":14.5, "y":0},
+                {"label":"Backspace", "x":15.5, "y":0, "w":1.75},
+                {"label":"Num Lock", "x":17.25, "y":0},
+                {"label":"Scroll Lock", "x":18.25, "y":0, "w":1.5},
+                {"label":"Sys Req", "x":19.75, "y":0, "w":1.5},
+                {"label":"F3", "x":0, "y":1},
+                {"label":"F4", "x":1, "y":1},
+                {"label":"Tab", "x":2.5, "y":1, "w":1.5},
+                {"label":"Q", "x":4, "y":1},
+                {"label":"W", "x":5, "y":1},
+                {"label":"E", "x":6, "y":1},
+                {"label":"R", "x":7, "y":1},
+                {"label":"T", "x":8, "y":1},
+                {"label":"Y", "x":9, "y":1},
+                {"label":"U", "x":10, "y":1},
+                {"label":"I", "x":11, "y":1},
+                {"label":"O", "x":12, "y":1},
+                {"label":"P", "x":13, "y":1},
+                {"label":"{", "x":14, "y":1},
+                {"label":"}", "x":15, "y":1, "w":1.25},
+                {"label":"Enter", "x":15.25, "y":2, "w":2},
+                {"label":"7", "x":17.25, "y":1},
+                {"label":"8", "x":18.25, "y":1},
+                {"label":"9", "x":19.25, "y":1},
+                {"label":"PrtSc", "x":20.25, "y":1},
+                {"label":"F5", "x":0, "y":2},
+                {"label":"F6", "x":1, "y":2},
+                {"label":"Ctrl", "x":2.5, "y":2, "w":1.75},
+                {"label":"A", "x":4.25, "y":2},
+                {"label":"S", "x":5.25, "y":2},
+                {"label":"D", "x":6.25, "y":2},
+                {"label":"F", "x":7.25, "y":2},
+                {"label":"G", "x":8.25, "y":2},
+                {"label":"H", "x":9.25, "y":2},
+                {"label":"J", "x":10.25, "y":2},
+                {"label":"K", "x":11.25, "y":2},
+                {"label":"L", "x":12.25, "y":2},
+                {"label":":", "x":13.25, "y":2},
+                {"label":"\"", "x":14.25, "y":2},
+                {"label":"4", "x":17.25, "y":2},
+                {"label":"5", "x":18.25, "y":2},
+                {"label":"6", "x":19.25, "y":2},
+                {"label":"-", "x":20.25, "y":2},
+                {"label":"F7", "x":0, "y":3},
+                {"label":"F8", "x":1, "y":3},
+                {"label":"Shift", "x":2.5, "y":3, "w":2.25},
+                {"label":"Z", "x":4.75, "y":3},
+                {"label":"X", "x":5.75, "y":3},
+                {"label":"C", "x":6.75, "y":3},
+                {"label":"V", "x":7.75, "y":3},
+                {"label":"B", "x":8.75, "y":3},
+                {"label":"N", "x":9.75, "y":3},
+                {"label":"M", "x":10.75, "y":3},
+                {"label":"<", "x":11.75, "y":3},
+                {"label":">", "x":12.75, "y":3},
+                {"label":"?", "x":13.75, "y":3},
+                {"label":"Shift", "x":14.75, "y":3, "w":1.5},
+                {"label":"|", "x":16.25, "y":3},
+                {"label":"1", "x":17.25, "y":3},
+                {"label":"2", "x":18.25, "y":3},
+                {"label":"3", "x":19.25, "y":3},
+                {"label":"+", "x":20.25, "y":3, "h":2},
+                {"label":"F9", "x":0, "y":4},
+                {"label":"F10", "x":1, "y":4},
+                {"label":"Alt", "x":2.5, "y":4, "w":1.75},
+                {"label":"~", "x":4.25, "y":4},
+                {"label":"Space", "x":5.25, "y":4, "w":9},
+                {"label":"Caps Lock", "x":14.25, "y":4, "w":2},
+                {"label":"0", "x":16.25, "y":4, "w":2},
+                {"label":".", "x":18.25, "y":4, "w":2}
+            ]
+        },
+        "LAYOUT_z150_tkl": {
+            "key_count": 88,
+            "layout": [
+                {"label":"F1", "x":0, "y":0},
+                {"label":"F2", "x":1, "y":0},
+                {"label":"Esc", "x":2.5, "y":0},
+                {"label":"1", "x":3.5, "y":0},
+                {"label":"2", "x":4.5, "y":0},
+                {"label":"3", "x":5.5, "y":0},
+                {"label":"4", "x":6.5, "y":0},
+                {"label":"5", "x":7.5, "y":0},
+                {"label":"6", "x":8.5, "y":0},
+                {"label":"7", "x":9.5, "y":0},
+                {"label":"8", "x":10.5, "y":0},
+                {"label":"9", "x":11.5, "y":0},
+                {"label":"0", "x":12.5, "y":0},
+                {"label":"-", "x":13.5, "y":0},
+                {"label":"=", "x":14.5, "y":0},
+                {"label":"Backspace", "x":15.5, "y":0, "w":2},
+                {"label":"Insert", "x":18.25, "y":0},
+                {"label":"Home", "x":19.25, "y":0},
+                {"label":"PgUp", "x":20.25, "y":0},
+                {"label":"F3", "x":0, "y":1},
+                {"label":"F4", "x":1, "y":1},
+                {"label":"Tab", "x":2.5, "y":1, "w":1.5},
+                {"label":"Q", "x":4, "y":1},
+                {"label":"W", "x":5, "y":1},
+                {"label":"E", "x":6, "y":1},
+                {"label":"R", "x":7, "y":1},
+                {"label":"T", "x":8, "y":1},
+                {"label":"Y", "x":9, "y":1},
+                {"label":"U", "x":10, "y":1},
+                {"label":"I", "x":11, "y":1},
+                {"label":"O", "x":12, "y":1},
+                {"label":"P", "x":13, "y":1},
+                {"label":"[", "x":14, "y":1},
+                {"label":"]", "x":15, "y":1},
+                {"label":"\\", "x":16, "y":1, "w":1.5},
+                {"label":"Delete", "x":18.25, "y":1},
+                {"label":"End", "x":19.25, "y":1},
+                {"label":"PgDn", "x":20.25, "y":1},
+                {"label":"F5", "x":0, "y":2},
+                {"label":"F6", "x":1, "y":2},
+                {"label":"Caps Lock", "x":2.5, "y":2, "w":1.75},
+                {"label":"A", "x":4.25, "y":2},
+                {"label":"S", "x":5.25, "y":2},
+                {"label":"D", "x":6.25, "y":2},
+                {"label":"F", "x":7.25, "y":2},
+                {"label":"G", "x":8.25, "y":2},
+                {"label":"H", "x":9.25, "y":2},
+                {"label":"J", "x":10.25, "y":2},
+                {"label":"K", "x":11.25, "y":2},
+                {"label":"L", "x":12.25, "y":2},
+                {"label":";", "x":13.25, "y":2},
+                {"label":"'", "x":14.25, "y":2},
+                {"label":"Enter", "x":15.25, "y":2, "w":2.25},
+                {"x":18.25, "y":2},
+                {"x":19.25, "y":2},
+                {"x":20.25, "y":2},
+                {"label":"F7", "x":0, "y":3},
+                {"label":"F8", "x":1, "y":3},
+                {"label":"Shift", "x":2.5, "y":3, "w":1.25},
+                {"label":"ISO \\", "x":3.75, "y":3},
+                {"label":"Z", "x":4.75, "y":3},
+                {"label":"X", "x":5.75, "y":3},
+                {"label":"C", "x":6.75, "y":3},
+                {"label":"V", "x":7.75, "y":3},
+                {"label":"B", "x":8.75, "y":3},
+                {"label":"N", "x":9.75, "y":3},
+                {"label":"M", "x":10.75, "y":3},
+                {"label":",", "x":11.75, "y":3},
+                {"label":".", "x":12.75, "y":3},
+                {"label":"/", "x":13.75, "y":3},
+                {"label":"Shift", "x":14.75, "y":3, "w":1.75},
+                {"label":"Fn", "x":16.5, "y":3},
+                {"x":18.25, "y":3},
+                {"label":"Up", "x":19.25, "y":3},
+                {"x":20.25, "y":3},
+                {"label":"F9", "x":0, "y":4},
+                {"label":"F10", "x":1, "y":4},
+                {"label":"Ctrl", "x":2.5, "y":4, "w":1.25},
+                {"label":"Win", "x":3.75, "y":4, "w":1.25},
+                {"label":"Alt", "x":5, "y":4, "w":1.25},
+                {"label":"Space", "x":6.25, "y":4, "w":6.25},
+                {"label":"Alt", "x":12.5, "y":4, "w":1.25},
+                {"label":"Win", "x":13.75, "y":4, "w":1.25},
+                {"label":"Menu", "x":15, "y":4, "w":1.25},
+                {"label":"Ctrl", "x":16.25, "y":4, "w":1.25},
+                {"label":"Left", "x":18.25, "y":4},
+                {"label":"Down", "x":19.25, "y":4},
+                {"label":"Right", "x":20.25, "y":4}
+            ]
+        }
+    }
+}
--- a/keyboards/z150_blackheart/keymaps/default/keymap.c
+++ b/keyboards/z150_blackheart/keymaps/default/keymap.c
@@ -1,38 +1,37 @@
+/* Copyright 2018 blindassassin111
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
 #include QMK_KEYBOARD_H

 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {

-	LAYOUT(
-		KC_F1, 	KC_F2,  	KC_ESC,  KC_1,   KC_2, 	KC_3,    KC_4, 	KC_5, 	KC_6, 	KC_7, 	KC_8, 	KC_9,  KC_0, 	KC_MINS, KC_EQL,  KC_BSPC, 		KC_NLCK, 	KC_SLCK, 	MO(1), 
-		KC_F3, 	KC_F4,  	KC_TAB,  KC_Q,   KC_W, 	KC_E,    KC_R, 	KC_T, 	KC_Y, 	KC_U, 	KC_I, 	KC_O,  KC_P, 	KC_LBRC, KC_RBRC, KC_ENT,		KC_P7,   KC_P8,   KC_P9, 	KC_PAST,
-		KC_F5, 	KC_F6,  	KC_LCTRL,KC_A,   KC_S, 	KC_D,    KC_F, 	KC_G, 	KC_H, 	KC_J, 	KC_K, 	KC_L,  KC_SCLN, KC_QUOT,   						KC_P4, 	 KC_P5,   KC_P6, 	KC_PMNS,
-		KC_F7, 	KC_F8,  	KC_LSFT, KC_Z,   KC_X, 	KC_C,    KC_V, 	KC_B, 	KC_N, 	KC_M, 	KC_COMM,KC_DOT,KC_SLSH, KC_RSFT, KC_BSLS, 				KC_P1,   KC_P2,   KC_P3,    KC_PPLS,
-		KC_F9, 	KC_F10, 	KC_LALT, KC_GRV, 							KC_SPC, 					 		 				 KC_CAPS, 					KC_P0,   KC_PDOT
-		),
+    [0] = LAYOUT(
+        KC_F1,   KC_F2,     KC_ESC,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_BSPC,   KC_NLCK,     KC_SLCK, MO(1),
+        KC_F3,   KC_F4,     KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC, KC_ENT,    KC_P7,   KC_P8,   KC_P9,   KC_PAST,
+        KC_F5,   KC_F6,     KC_LCTL, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT,                     KC_P4,   KC_P5,   KC_P6,   KC_PMNS,
+        KC_F7,   KC_F8,     KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_RSFT, KC_BSLS,            KC_P1,   KC_P2,   KC_P3,   KC_PPLS,
+        KC_F9,   KC_F10,    KC_LALT, KC_GRV,                             KC_SPC,                                                        KC_CAPS,                KC_P0,            KC_PDOT
+    ),

-	LAYOUT(
-		_______, _______, 	 RESET,  _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, 		_______, 	_______,  _______, 
-		_______, _______, 	_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, 		_______, _______, _______, _______,
-		_______, _______, 	_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, 				 		_______, _______, _______, _______,
-		_______, _______, 	_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, 		 		_______, _______, _______, _______,
-		_______, _______, 	_______, _______, 								_______, 										_______,				 				_______,  	_______
-		),
-
-	LAYOUT_z150_tkl(
-		KC_F1, 	KC_F2, 		KC_ESC,  KC_1, 	  KC_2,   KC_3, 	 KC_4, 	KC_5, 	KC_6, KC_7, KC_8, 	 KC_9, 	 KC_0, 	  KC_MINS, KC_EQL, 	KC_BSPC, 		KC_INS,  KC_HOME, KC_PGUP, 
-		KC_F3, 	KC_F4, 		KC_TAB,  KC_Q, 	  KC_W,   KC_E, 	 KC_R, 	KC_T, 	KC_Y, KC_U, KC_I, 	 KC_O, 	 KC_P, 	  KC_LBRC, KC_RBRC, KC_BSLS, 		KC_DEL,  KC_END,  KC_PGDN, 
-		KC_F5, 	KC_F6, 		KC_CAPS, KC_A, 	  KC_S,   KC_D, 	 KC_F, 	KC_G, 	KC_H, KC_J, KC_K, 	 KC_L, 	 KC_SCLN, KC_QUOT, KC_ENT, 			 		XXXXXXX, XXXXXXX, XXXXXXX, 
-		KC_F7, 	KC_F8, 		KC_LSFT, KC_BSLS, KC_Z,   KC_X,      KC_C, 	KC_V, 	KC_B, KC_N, KC_M,    KC_COMM,KC_DOT,  KC_SLSH, KC_RSFT, MO(1), 			XXXXXXX, KC_UP,   XXXXXXX, 
-		KC_F9, 	KC_F10,		KC_LCTL, KC_LGUI, KC_LALT,		 		KC_SPC, 							 KC_RALT, KC_RGUI, KC_MENU, KC_RCTL, 			KC_LEFT, KC_DOWN, KC_RGHT
-		),
-
-	LAYOUT_z150_tkl(
-		_______, _______, 	 RESET,  _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, 			_______, _______, _______, 
-		_______, _______, 	_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, 			_______, _______, _______, 
-		_______, _______, 	_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, 					_______, _______, _______, 
-		_______, _______, 	_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, 					_______, _______, _______, 
-		_______, _______, 	_______, _______, _______, _______, 		_______,                            		_______, _______, _______, _______, 			_______, _______, _______
-		),
+    [1] = LAYOUT(
+        _______, _______,   RESET,   _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,   _______, _______, _______,
+        _______, _______,   _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,   _______, _______, _______, _______,
+        _______, _______,   _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,                     _______, _______, _______, _______,
+        _______, _______,   _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,            _______, _______, _______, _______,
+        _______, _______,   _______, _______,                            _______,                                                       _______,                _______,          _______
+    ),
 };

 void matrix_init_user(void) {
@@ -42,28 +41,8 @@ void matrix_scan_user(void) {
 }

 bool process_record_user(uint16_t keycode, keyrecord_t *record) {
-	return true;
+    return true;
 }

 void led_set_user(uint8_t usb_led) {
-  DDRB |= (1 << 0);
-  DDRE |= (1 << 6) | (1 << 7);
-
-  if (usb_led & (1 << USB_LED_NUM_LOCK)) {
-    PORTE |= (1 << 7);
-  } else {
-    PORTE &= ~(1 << 7);
-  }
-
-  if (usb_led & (1 << USB_LED_CAPS_LOCK)) {
-    PORTB |= (1 << 0);
-  } else {
-    PORTB &= ~(1 << 0);
-  }
-
-  if (usb_led & (1 << USB_LED_SCROLL_LOCK)) {
-    PORTE |= (1 << 6);
-  } else {
-    PORTE &= ~(1 << 6);
-  }
 }
--- a/keyboards/z150_blackheart/keymaps/default_tkl/keymap.c
+++ b/keyboards/z150_blackheart/keymaps/default_tkl/keymap.c
@@ -0,0 +1,48 @@
+/* Copyright 2018 blindassassin111
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+    [0] = LAYOUT_z150_tkl(
+        KC_F1,   KC_F2,     KC_ESC,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_BSPC,     KC_INS,  KC_HOME, KC_PGUP,
+        KC_F3,   KC_F4,     KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC, KC_BSLS,     KC_DEL,  KC_END,  KC_PGDN,
+        KC_F5,   KC_F6,     KC_CAPS, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT, KC_ENT,               XXXXXXX, XXXXXXX, XXXXXXX,
+        KC_F7,   KC_F8,     KC_LSFT, KC_BSLS, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_RSFT, MO(1),       XXXXXXX, KC_UP,   XXXXXXX,
+        KC_F9,   KC_F10,    KC_LCTL, KC_LGUI, KC_LALT,                            KC_SPC,                             KC_RALT, KC_RGUI, KC_MENU, KC_RCTL,     KC_LEFT, KC_DOWN, KC_RGHT
+    ),
+
+    [1] = LAYOUT_z150_tkl(
+        _______, _______,   RESET,   _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,     _______, _______, _______,
+        _______, _______,   _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,     _______, _______, _______,
+        _______, _______,   _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,              _______, _______, _______,
+        _______, _______,   _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,     _______, _______, _______,
+        _______, _______,   _______, _______, _______,                            _______,                            _______, _______, _______, _______,     _______, _______, _______
+    ),
+};
+
+void matrix_init_user(void) {
+}
+
+void matrix_scan_user(void) {
+}
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+    return true;
+}
+
+void led_set_user(uint8_t usb_led) {
+}
--- a/keyboards/z150_blackheart/readme.md
+++ b/keyboards/z150_blackheart/readme.md
@@ -5,7 +5,7 @@ A replacement PCB for Zenith Z-150 keyboards.

 Keyboard Maintainer: QMK Community and blindassassin111  
 Hardware Supported: Z-150 blackheart PCB  
-Hardware Availability: https://deskthority.net/group-buys-f50/programmable-vintage-board-pcbs-omnikey-at101-and-z-150-t19325.html
+Hardware Availability: [Deskthority Group Buy](https://deskthority.net/group-buys-f50/programmable-vintage-board-pcbs-omnikey-at101-and-z-150-t19325.html)

 Make example for this keyboard (after setting up your build environment):

--- a/keyboards/z150_blackheart/z150_blackheart.c
+++ b/keyboards/z150_blackheart/z150_blackheart.c
@@ -1 +1,32 @@
 #include "z150_blackheart.h"
+
+void matrix_init_kb(void) {
+    setPinOutput(B0);
+    setPinOutput(E6);
+    setPinOutput(E7);
+
+    matrix_init_user();
+};
+
+void led_set_kb(uint8_t usb_led) {
+    // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
+    if (IS_LED_ON(usb_led, USB_LED_NUM_LOCK)) {
+        writePinHigh(E7);
+    } else {
+        writePinLow(E7);
+    }
+
+    if (IS_LED_ON(usb_led, USB_LED_CAPS_LOCK)) {
+        writePinHigh(B0);
+    } else {
+        writePinLow(B0);
+    }
+
+    if (IS_LED_ON(usb_led, USB_LED_SCROLL_LOCK)) {
+        writePinHigh(E6);
+    } else {
+        writePinLow(E6);
+    }
+
+    led_set_user(usb_led);
+}
--- a/keyboards/z150_blackheart/z150_blackheart.h
+++ b/keyboards/z150_blackheart/z150_blackheart.h
@@ -1,34 +1,31 @@
-#ifndef z150_blackheart_H
-#define z150_blackheart_H
+#pragma once

 #include "quantum.h"

 #define LAYOUT( \
-	K000, K001, 	K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014, K015, 	K016, 	 K017, K019, \
-	K100, K101, 	K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, K115, 	K116, K117, K118, K119, \
-	K200, K201, 	K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213,       			K215, K216, K217, K218, \
-	K300, K301, 	K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313, K314, 			K315, K316, K317, K318, \
-	K400, K401, 	K402, K403, 			      K407,                          			   K414,	   		K415,	   K417 \
+    K00, K01,     K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E, K0F,     K0G,   K0H, K0J,    \
+    K10, K11,     K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E, K1F,     K1G, K1H, K1I, K1J, \
+    K20, K21,     K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D,               K2F, K2G, K2H, K2I, \
+    K30, K31,     K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, K3E,          K3F, K3G, K3H, K3I, \
+    K40, K41,     K42, K43,                K47,                                 K4E,          K4F,      K4H     \
 ) { \
-	{ K000,  K001,  K002,  K003,  K004,  K005,  K006,  K007,  K008,  K009,  K010,  K011,  K012,  K013,  K014,  K015,  K016,  K017,  KC_NO, K019 }, \
-	{ K100,  K101,  K102,  K103,  K104,  K105,  K106,  K107,  K108,  K109,  K110,  K111,  K112,  K113,  K114,  K115,  K116,  K117,  K118,  K119 }, \
-	{ K200,  K201,  K202,  K203,  K204,  K205,  K206,  K207,  K208,  K209,  K210,  K211,  K212,  K213,  KC_NO, K215,  K216,  K217,  K218,  KC_NO }, \
-	{ K300,  K301,  K302,  K303,  K304,  K305,  K306,  K307,  K308,  K309,  K310,  K311,  K312,  K313,  K314,  K315,  K316,  K317,  K318,  KC_NO }, \
-	{ K400,  K401,  K402,  K403,  KC_NO, KC_NO, KC_NO, K407,  KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO,  K414,  K415, KC_NO, K417,  KC_NO, KC_NO }  \
+    { K00,   K01,   K02,   K03,   K04,   K05,   K06,   K07,   K08,   K09,   K0A,   K0B,   K0C,   K0D,   K0E,   K0F,   K0G,   K0H,   KC_NO, K0J   }, \
+    { K10,   K11,   K12,   K13,   K14,   K15,   K16,   K17,   K18,   K19,   K1A,   K1B,   K1C,   K1D,   K1E,   K1F,   K1G,   K1H,   K1I,   K1J   }, \
+    { K20,   K21,   K22,   K23,   K24,   K25,   K26,   K27,   K28,   K29,   K2A,   K2B,   K2C,   K2D,   KC_NO, K2F,   K2G,   K2H,   K2I,   KC_NO }, \
+    { K30,   K31,   K32,   K33,   K34,   K35,   K36,   K37,   K38,   K39,   K3A,   K3B,   K3C,   K3D,   K3E,   K3F,   K3G,   K3H,   K3I,   KC_NO }, \
+    { K40,   K41,   K42,   K43,   KC_NO, KC_NO, KC_NO, K47,   KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, K4E,   K4F,   KC_NO, K4H,   KC_NO, KC_NO }  \
 }

 #define LAYOUT_z150_tkl( \
-	K000, K001, 	K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014, K015,       K017, K018, K019, \
-	K100, K101, 	K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, K115,       K117, K118, K119, \
-	K200, K201, 	K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, K214,       	  K216, K217, K218, \
-	K300, K301, 	K302, K405, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313, K314,       K316, K317, K318, \
-	K400, K401, 	K402, K403, K404, 	          K407,                         K412, K413, K414, K415, 	  K416, K417, K418  \
+    K00, K01,     K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E, K0F,     K0H, K0I, K0J, \
+    K10, K11,     K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E, K1F,     K1H, K1I, K1J, \
+    K20, K21,     K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D, K2E,          K2G, K2H, K2I, \
+    K30, K31,     K32, K45, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, K3E,     K3G, K3H, K3I, \
+    K40, K41,     K42, K43, K44,                K47,                K4C, K4D, K4E, K4F,     K4G, K4H, K4I  \
 ) { \
-	{ K000,  K001,  K002,  K003,  K004,  K005,  K006,  K007,  K008,  K009,  K010,  K011,  K012,  K013,  K014,  K015,  KC_NO, K017,  K018,  K019 }, \
-	{ K100,  K101,  K102,  K103,  K104,  K105,  K106,  K107,  K108,  K109,  K110,  K111,  K112,  K113,  K114,  K115,  KC_NO, K117,  K118,  K119 }, \
-	{ K200,  K201,  K202,  K203,  K204,  K205,  K206,  K207,  K208,  K209,  K210,  K211,  K212,  K213,  K214,  KC_NO, K216,  K217,  K218,  KC_NO }, \
-	{ K300,  K301,  K302,  K303,  K304,  K305,  K306,  K307,  K308,  K309,  K310,  K311,  K312,  K313,  K314,  KC_NO, K316,  K317,  K318,  KC_NO }, \
-	{ K400,  K401,  K402,  K403,  K404,  K405,  KC_NO, K407,  KC_NO, KC_NO, KC_NO, KC_NO, K412,  K413,  K414,  K415,  K416,  K417,  K418,  KC_NO }  \
+    { K00,   K01,   K02,   K03,   K04,   K05,   K06,   K07,   K08,   K09,   K0A,   K0B,   K0C,   K0D,   K0E,   K0F,   KC_NO, K0H,   K0I,   K0J   }, \
+    { K10,   K11,   K12,   K13,   K14,   K15,   K16,   K17,   K18,   K19,   K1A,   K1B,   K1C,   K1D,   K1E,   K1F,   KC_NO, K1H,   K1I,   K1J   }, \
+    { K20,   K21,   K22,   K23,   K24,   K25,   K26,   K27,   K28,   K29,   K2A,   K2B,   K2C,   K2D,   K2E,   KC_NO, K2G,   K2H,   K2I,   KC_NO }, \
+    { K30,   K31,   K32,   K33,   K34,   K35,   K36,   K37,   K38,   K39,   K3A,   K3B,   K3C,   K3D,   K3E,   KC_NO, K3G,   K3H,   K3I,   KC_NO }, \
+    { K40,   K41,   K42,   K43,   K44,   K45,   KC_NO, K47,   KC_NO, KC_NO, KC_NO, KC_NO, K4C,   K4D,   K4E,   K4F,   K4G,   K4H,   K4I,   KC_NO }  \
 }
-
-#endif
--- a/layouts/community/60_ansi/stanrc85-ansi/keymap.c
+++ b/layouts/community/60_ansi/stanrc85-ansi/keymap.c
@@ -17,33 +17,33 @@
 #include "stanrc85.h"

 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-	[0] = LAYOUT_60_ansi(
-		TD_TESC, KC_1,    KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_BSPC,
-		KC_TAB,  KC_Q,    KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC, KC_BSLS,
-		KC_CTLE, KC_A,    KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K,    KC_L,    KC_SCLN, KC_QUOT, KC_ENT,
-		KC_LSFT, KC_Z,    KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT,  KC_SLSH, KC_RSFT,
-		KC_LCTL, KC_LGUI, KC_LALT,          LT_SPCF,          KC_RALT, TD_TWIN, MO(3),   TD_TCTL),
+  [0] = LAYOUT_60_ansi(
+    TD_TESC, KC_1,    KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_BSPC,
+	KC_TAB,  KC_Q,    KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC, KC_BSLS,
+	KC_CTLE, KC_A,    KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K,    KC_L,    KC_SCLN, KC_QUOT, KC_ENT,
+	KC_LSFT, KC_Z,    KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT,  KC_SLSH, KC_RSFT,
+	KC_LCTL, KC_LGUI, KC_LALT,          LT_SPCF,          KC_RALT, TD_TWIN, MO(3),   TD_TCTL),

-	[1] = LAYOUT_60_ansi(
-		KC_GESC, KC_1,    KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8,    KC_9,   KC_0,    KC_MINS, KC_EQL,  KC_BSPC,
-		KC_TAB,  KC_Q,    KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I,    KC_O,   KC_P,    KC_LBRC, KC_RBRC, KC_BSLS,
-		KC_CAPS, KC_A,    KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K,    KC_L,   KC_SCLN, KC_QUOT, KC_ENT,
-		KC_LSFT, KC_Z,    KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT,
-		KC_LCTL, KC_LGUI, KC_LALT,          KC_SPC ,          KC_RALT, MO(2),  MO(3),   KC_RCTL),
+  [1] = LAYOUT_60_ansi(
+	KC_GESC, KC_1,    KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8,    KC_9,   KC_0,    KC_MINS, KC_EQL,  KC_BSPC,
+	KC_TAB,  KC_Q,    KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I,    KC_O,   KC_P,    KC_LBRC, KC_RBRC, KC_BSLS,
+	KC_CAPS, KC_A,    KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K,    KC_L,   KC_SCLN, KC_QUOT, KC_ENT,
+	KC_LSFT, KC_Z,    KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT,
+	KC_LCTL, KC_LGUI, KC_LALT,          KC_SPC ,          KC_RALT, MO(2),  MO(3),   KC_RCTL),

-	[2] = LAYOUT_60_ansi(
-		KC_TILD, KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_DEL,
-		_______, _______, CA_QUOT, KC_VOLU, CA_SCLN, _______, _______, KC_HOME, KC_UP,   KC_END,  _______, _______, _______, KC_INS,
-		KC_CAPS, _______, KC_MUTE, KC_VOLD, KC_MPLY, _______, _______, KC_LEFT, KC_DOWN, KC_RGHT, _______, _______, _______,
-		_______, KC_RDP,  _______, _______, _______, _______, _______, _______, KC_WBAK, KC_WFWD, _______, _______,
-		_______, _______, _______,                   _______,                   _______, _______, _______, _______),
+  [2] = LAYOUT_60_ansi(
+	KC_TILD, KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_DEL,
+	_______, _______, CA_QUOT, KC_VOLU, CA_SCLN, _______, _______, KC_HOME, KC_UP,   KC_END,  KC_PSCR, _______, _______, KC_INS,
+	KC_CAPS, _______, KC_MUTE, KC_VOLD, KC_MPLY, _______, _______, KC_LEFT, KC_DOWN, KC_RGHT, _______, _______, _______,
+	_______, KC_RDP,  _______, _______, _______, _______, _______, _______, KC_WBAK, KC_WFWD, _______, _______,
+	_______, _______, _______,                   _______,                   _______, _______, _______, _______),

-	[3] = LAYOUT_60_ansi(
-		_______, RGB_TOG, RGB_MOD, RGB_VAD, RGB_VAI, RGB_SAI, RGB_HUD, RGB_HUI, _______, _______, _______, _______, _______, _______,
-		_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, RESET,
-		TG(1),   _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_MAKE,
-		_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
-		_______, _______, _______,                   _______,                   _______, _______, _______, _______)
+  [3] = LAYOUT_60_ansi(
+	_______, RGB_TOG, RGB_MOD, RGB_VAD, RGB_VAI, RGB_SAI, RGB_HUD, RGB_HUI, _______, _______, _______, _______, _______, _______,
+	_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, RESET,
+	_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_MAKE,
+	_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+	_______, _______, _______,                   _______,                   _______, _______, _______, TG(1))
 };

 bool process_record_keymap(uint16_t keycode, keyrecord_t *record) {
--- a/quantum/process_keycode/process_space_cadet.c
+++ b/quantum/process_keycode/process_space_cadet.c
@@ -60,18 +60,18 @@

 // Control / paren setup
 #ifndef LCPO_KEYS
-  #define LCPO_KEYS KC_LCTL, KC_LCTL, KC_9
+  #define LCPO_KEYS KC_LCTL, KC_LSFT, KC_9
 #endif
 #ifndef RCPC_KEYS
-  #define RCPC_KEYS KC_RCTL, KC_RCTL, KC_0
+  #define RCPC_KEYS KC_RCTL, KC_RSFT, KC_0
 #endif

 // Alt / paren setup
 #ifndef LAPO_KEYS
-  #define LAPO_KEYS KC_LALT, KC_LALT, KC_9
+  #define LAPO_KEYS KC_LALT, KC_LSFT, KC_9
 #endif
 #ifndef RAPC_KEYS
-  #define RAPC_KEYS KC_RALT, KC_RALT, KC_0
+  #define RAPC_KEYS KC_RALT, KC_RSFT, KC_0
 #endif

 // Shift / Enter setup
@@ -143,7 +143,9 @@ bool process_space_cadet(uint16_t keycode, keyrecord_t *record) {
      return false;
    }
    default: {
-      sc_last = 0;
+      if (record->event.pressed) {
+        sc_last = 0;
+      }
      break;
    }
  }
--- a/quantum/rgb_matrix_animations/solid_reactive_simple_anim.h
+++ b/quantum/rgb_matrix_animations/solid_reactive_simple_anim.h
@@ -1,4 +1,3 @@
-#pragma once
 #ifdef RGB_MATRIX_KEYREACTIVE_ENABLED
 #ifndef DISABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE
 RGB_MATRIX_EFFECT(SOLID_REACTIVE_SIMPLE)
--- a/users/stanrc85/layer_rgb.c
+++ b/users/stanrc85/layer_rgb.c
@@ -5,7 +5,7 @@ void matrix_init_user(void) {
 };

 uint32_t layer_state_set_user(uint32_t state) {
-    switch (biton32(state)) {
+  switch (biton32(state)) {
    case 0:
        rgblight_setrgb (0xFF,  0x00, 0x00);
        break;
--- a/users/stanrc85/stanrc85.c
+++ b/users/stanrc85/stanrc85.c
@@ -45,8 +45,8 @@ void ctl_copy_reset (qk_tap_dance_state_t *state, void *user_data) {
 }

 qk_tap_dance_action_t tap_dance_actions[] = {
-	[TD_WIN] = ACTION_TAP_DANCE_DOUBLE(KC_CAD, KC_LOCK),
-	[TD_ESC] = ACTION_TAP_DANCE_DOUBLE(KC_ESC, KC_GRV),
+  [TD_WIN] = ACTION_TAP_DANCE_DOUBLE(KC_CAD, KC_LOCK),
+  [TD_ESC] = ACTION_TAP_DANCE_DOUBLE(KC_ESC, KC_GRV),
  [TD_RCTL] = ACTION_TAP_DANCE_FN_ADVANCED(NULL, ctl_copy_finished, ctl_copy_reset)
 };

--- a/users/stanrc85/stanrc85.h
+++ b/users/stanrc85/stanrc85.h
@@ -20,7 +20,7 @@
 #define TD_TCTL TD(TD_RCTL)

 enum cust_keys {
-	KC_MAKE = SAFE_RANGE,
+  KC_MAKE = SAFE_RANGE,
  KC_RDP
 };
Author	SHA1	Message	Date
XScorpion2	c6184d2e7e	Added check for event pressed to clear space cadet (#5839 ) * Added check for pressed to clear space cadet * Found some docs to update * Update docs/quantum_keycodes.md Co-Authored-By: fauxpark <fauxpark@gmail.com> * Changes from PR	2019-05-11 22:20:14 -07:00
noroadsleft	ec302295b6	[Keyboard] Z-150 Blackheart refactor (#5823 ) * Fix white space on z150_blackheart.h * Update z150_blackheart.h to use #pragma once include guard * Update z150_blackheart.h to use QMK-preferred K<row><col> notation * Add QMK Configurator support * Refactor the keymaps - refactor the keymaps into separate files for each layout macro - give credit where credit is due - white space update (four-space indent) * Make Hardware Availability link in readme a rich text link * Convert LED indicators to GPIO commands * Elevate Indicator LED set-up and toggling to keyboard level	2019-05-11 22:16:07 -07:00
Mike Roberts	f542c0589b	NEK Type A (#5175 ) * project creation and config.h import * fix name * cleanup * layout for left * working left with feather pins * full keymap * ? * let's do this * non working twimaster version * it fucking works! * bluetooth! * cleanup * use auto output for ADAFRUIT_BLE * remove auto from custom matrix * better ble auto * fix f1 * revert * fix ble * update readme * Update readme.md * Update readme.md	2019-05-11 18:12:06 -07:00
zvecr	d53cbd2dc6	Update run command now that the install script is unattended, fix mount point for Debian (#5847 )	2019-05-11 17:55:12 -07:00
stanrc85	5c4707eafc	[Keymap] Minor keymap updates (#5850 ) * Move layer toggle key for one handed operation * Add print screen keycode * Cleaning up some tab/space formatting	2019-05-11 17:51:37 -07:00
XScorpion2	819364ea23	Fix for Solid Reactive mode bug (#5846 ) derp, forgot to remove the pragma once	2019-05-11 12:31:31 -07:00
William Chang	b9c38cfec8	Add vim arrow keybindings to layer 1, update readme. (#5842 )	2019-05-11 10:14:42 -07:00
Paul J. Miller	d591ab6263	feat: add kbd67v2 support (#5777 ) * feat: add kbd67v2 support * update cr * Update keyboards/kbdfans/kbd67/rev2/config.h Co-Authored-By: Vorror <paul@dgtlrepublic.com> * Update keyboards/kbdfans/kbd67/rev2/config.h Co-Authored-By: Vorror <paul@dgtlrepublic.com> * Update keyboards/kbdfans/kbd67/rev2/rev2.c Co-Authored-By: Vorror <paul@dgtlrepublic.com> * Update keyboards/kbdfans/kbd67/rev2/rules.mk Co-Authored-By: MechMerlin <30334081+mechmerlin@users.noreply.github.com> * Update keyboards/kbdfans/kbd67/rev2/readme.md Co-Authored-By: MechMerlin <30334081+mechmerlin@users.noreply.github.com>	2019-05-11 09:24:49 -07:00
ymzcdg	7871a465d3	translate docs into Mandarin Chinese (#5807 ) * translate newbs.md into Madarin Chinese translate newbs.md into Madarin Chinese * translate docs into Mandarin Chinese translate getting_started_github.md into Mandarin Chinese * translate getting_started_getting_help.md into Mandarin Chinese translate getting_started_getting_help.md into Mandarin Chinese * contributing.md to Chinese Personify QMK as a girl named Q酱 . It can make more developer read this document and contribute QMK. * getting_started_introduction.md to Chinese getting_started_introduction.md to Chinese * faq.md to Chinese faq.md to Chinese * crlf2lf getting_started_introduction.md ending line fix getting_started_introduction.md * crlf2lf contributing.md crlf2lf contributing.md	2019-05-11 09:22:16 -07:00