Update docker util script and travis to use new base container

* Added initial files for the Adron  3-key macro pad

* Refactor of "adron_pad" to "ivy", cleaned up the readme and removed un-needed keymap as well.

* Made suggested changes to commit for PR

* Removed unneeded define block from SUBPROJECT_rev1 as it is redundant (Thanks drashna ;) )

.travis.yml

@@ -13,8 +13,6 @@ env:
   - MAKEFLAGS="-j3 --output-sync"
 services:
   - docker
-before_install:
-  - docker build -t qmkfm/qmk_firmware .
 install:
   - npm install -g moxygen
 script:

Dockerfile

@@ -1,26 +1,4 @@
-FROM debian:9
-
-RUN apt-get update && apt-get install --no-install-recommends -y \
-    avr-libc \
-    avrdude \
-    binutils-arm-none-eabi \
-    binutils-avr \
-    build-essential \
-    dfu-programmer \
-    dfu-util \
-    gcc \
-    gcc-avr \
-    git \
-    libnewlib-arm-none-eabi \
-    software-properties-common \
-    unzip \
-    wget \
-    zip \
-    && rm -rf /var/lib/apt/lists/*
-
-# upgrade gcc-arm-none-eabi from the default 5.4.1 to 6.3.1 due to ARM runtime issues
-RUN wget -q https://developer.arm.com/-/media/Files/downloads/gnu-rm/6-2017q2/gcc-arm-none-eabi-6-2017-q2-update-linux.tar.bz2 -O - | \
-    tar xj --strip-components=1 -C /
+FROM qmkfm/base_container
 
 VOLUME /qmk_firmware
 WORKDIR /qmk_firmware

docs/faq_debug.md

@@ -87,6 +87,7 @@ Size after:
 - EEPROM has around a 100000 write cycle.  You shouldn't rewrite the
   firmware repeatedly and continually; that'll burn the EEPROM
   eventually.
+
 ## NKRO Doesn't work
 First you have to compile firmware with this build option `NKRO_ENABLE` in **Makefile**.
 

docs/feature_unicode.md

@@ -1,28 +1,44 @@
 # Unicode Support
 
-There are three Unicode keymap definition methods available in QMK:
+Unicode characters can be input straight from your keyboard! There are some limitations, however.
 
-## `UNICODE_ENABLE`
+QMK has three different methods for enabling Unicode input and defining keycodes:
 
-Supports Unicode up to `0x7FFF`. This covers characters for most modern languages, as well as symbols, but it doesn't cover emoji. The keycode function is `UC(c)` in the keymap, where _c_ is the code point's number (preferably hexadecimal, up to 4 digits long). For example: `UC(0x45B)`, `UC(0x30C4)`.
+## Basic Unicode
 
-## `UNICODEMAP_ENABLE`
+This method supports Unicode code points up to `0x7FFF`. This covers characters for most modern languages, as well as symbols, but it doesn't cover emoji.
 
-Supports Unicode up to `0x10FFFF` (all possible code points). You need to maintain a separate mapping table `const uint32_t PROGMEM unicode_map[] = {...}` in your keymap file. The keycode function is `X(i)`, where _i_ is an array index into the mapping table. The table may contain at most 16384 entries.
+Add the following to your `rules.mk`:
 
-You may want to have an enum to make referencing easier. So, you could add something like this to your keymap file:
+```make
+UNICODE_ENABLE = yes
+```
+
+Then add `UC(c)` keycodes to your keymap, where _c_ is the code point (preferably in hexadecimal, up to 4 digits long). For example: `UC(0x45B)`, `UC(0x30C4)`.
+
+## Unicode Map
+
+This method supports all possible code points (up to `0x10FFFF`); however, you need to maintain a separate mapping table in your keymap file, which may contain at most 16384 entries.
+
+Add the following to your `rules.mk`:
+
+```make
+UNICODEMAP_ENABLE = yes
+```
+
+Then add `X(i)` keycodes to your keymap, where _i_ is an array index into the mapping table:
 
 ```c
 enum unicode_names {
-  BANG,
-  IRONY,
-  SNEK,
+    BANG,
+    IRONY,
+    SNEK
 };
 
 const uint32_t PROGMEM unicode_map[] = {
-  [BANG]  = 0x203D,  // ‽
-  [IRONY] = 0x2E2E,  // ⸮
-  [SNEK]  = 0x1F40D, // 🐍
+    [BANG]  = 0x203D,  // ‽
+    [IRONY] = 0x2E2E,  // ⸮
+    [SNEK]  = 0x1F40D, // 🐍
 };
 ```
 
@@ -30,27 +46,33 @@ Then you can use `X(BANG)`, `X(SNEK)` etc. in your keymap.
 
 ### Lower and Upper Case
 
-Characters often come in lower and upper case pairs, for example: å, Å. To make inputting these characters easier, you can use `XP(i, j)` in your keymap, where _i_ and _j_ are the mapping table indices of the lower and upper case character, respectively. If you're holding down Shift or have Caps Lock turned on when you press the key, the second (upper case) character will be inserted; otherwise, the first (lower case) version will appear.
+Characters often come in lower and upper case pairs, such as å and Å. To make inputting these characters easier, you can use `XP(i, j)` in your keymap, where _i_ and _j_ are the mapping table indices of the lower and upper case character, respectively. If you're holding down Shift or have Caps Lock turned on when you press the key, the second (upper case) character will be inserted; otherwise, the first (lower case) version will appear.
 
-This is most useful when creating a keymap for an international layout with special characters. Instead of having to put the lower and upper case versions of a character on separate keys, you can have them both on the same key by using `XP`. This blends Unicode keys in with regular alphas.
+This is most useful when creating a keymap for an international layout with special characters. Instead of having to put the lower and upper case versions of a character on separate keys, you can have them both on the same key by using `XP()`. This helps blend Unicode keys in with regular alphas.
 
 Due to keycode size constraints, _i_ and _j_ can each only refer to one of the first 128 characters in your `unicode_map`. In other words, 0 ≤ _i_ ≤ 127 and 0 ≤ _j_ ≤ 127. This is enough for most use cases, but if you'd like to customize the index calculation, you can override the [`unicodemap_index()`](https://github.com/qmk/qmk_firmware/blob/71f640d47ee12c862c798e1f56392853c7b1c1a8/quantum/process_keycode/process_unicodemap.c#L40) function. This also allows you to, say, check Ctrl instead of Shift/Caps.
 
-## `UCIS_ENABLE`
+## UCIS
 
-Supports Unicode up to `0x10FFFF` (all possible code points). As with `UNICODEMAP`, you need to maintain a mapping table in your keymap file. However, there are no built-in keycodes for this feature — you have to add a keycode or function that calls `qk_ucis_start()`. Once this function has been called, you can type the corresponding mnemonic for your character, then hit Space or Enter to complete it, or Esc to cancel. If the mnemonic matches an entry in your table, the typed text will automatically be erased and the corresponding Unicode character inserted.
+This method also supports all possible code points. As with the Unicode Map method, you need to maintain a mapping table in your keymap file. However, there are no built-in keycodes for this feature — you have to create a custom keycode or function that invokes this functionality.
 
-For instance, you could define a table like this in your keymap file:
+Add the following to your `rules.mk`:
+
+```make
+UCIS_ENABLE = yes
+```
+
+Then define a table like this in your keymap file:
 
 ```c
 const qk_ucis_symbol_t ucis_symbol_table[] = UCIS_TABLE(
-  UCIS_SYM("poop", 0x1F4A9), // 💩
-  UCIS_SYM("rofl", 0x1F923), // 🤣
-  UCIS_SYM("kiss", 0x1F619)  // 😙
+    UCIS_SYM("poop", 0x1F4A9), // 💩
+    UCIS_SYM("rofl", 0x1F923), // 🤣
+    UCIS_SYM("kiss", 0x1F619)  // 😙
 );
 ```
 
-To use it, call `qk_ucis_start()`, then type "rofl" and hit Enter. QMK should erase the "rofl" text and insert the laughing emoji.
+To use it, call `qk_ucis_start()`. Then, type the mnemonic for the character (such as "rofl"), and hit Space or Enter. QMK should erase the "rofl" text and insert the laughing emoji.
 
 ### Customization
 
@@ -68,7 +90,7 @@ Unicode input in QMK works by inputting a sequence of characters to the OS, sort
 
 The following input modes are available:
 
-* **`UC_OSX`**: macOS built-in Unicode hex input. Supports code points up to `0xFFFF` (`0x10FFFF` with `UNICODEMAP`).
+* **`UC_OSX`**: macOS built-in Unicode hex input. Supports code points up to `0xFFFF` (`0x10FFFF` with Unicode Map).
 
   To enable, go to _System Preferences > Keyboard > Input Sources_, add _Unicode Hex Input_ to the list (it's under _Other_), then activate it from the input dropdown in the Menu Bar.
   By default, this mode uses the left Option key (`KC_LALT`) for Unicode input, but this can be changed by defining [`UNICODE_KEY_OSX`](#input-key-configuration) with another keycode.
@@ -112,7 +134,7 @@ You can also switch the input mode by calling `set_unicode_input_mode(x)` in you
 
 ```c
 void eeconfig_init_user(void) {
-  set_unicode_input_mode(UC_LNX);
+    set_unicode_input_mode(UC_LNX);
 }
 ```
 

docs/newbs_flashing.md

@@ -127,9 +127,7 @@ Once it does this, you'll want to reset the controller.  It should then show out
 >>> dfu-programmer atmega32u4 reset
 ```
 
-If you have any issues with this, you may need to this: 
-
-    sudo make <my_keyboard>:<my_keymap>:dfu
+?> If you have any issues with this - such as `dfu-programmer: no device present` - please see the [Frequently Asked Build Questions](faq_build.md).
 
 #### DFU commands
 

keyboards/dz60/keymaps/billiams/keymap.c

@@ -4,9 +4,9 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 
   /* Qwerty
    * ,-----------------------------------------------------------------------------------------.
-   * |  `  |  1  |  2  |  3  |  4  |  5  |  6  |  7  |  8  |  9  |  0  |  -  |  =  |   Bkspc   |
+   * |  `  |  1  |  2  |  3  |  4  |  5  |  6  |  7  |  8  |  9  |  0  |  -  |  =  |     \     |
    * |-----------------------------------------------------------------------------------------+
-   * | Tab    |  Q  |  W  |  E  |  R  |  T  |  Y  |  U  |  I  |  O  |  P  |  [  |  ]  |    \   |
+   * | Tab    |  Q  |  W  |  E  |  R  |  T  |  Y  |  U  |  I  |  O  |  P  |  [  |  ]  |  Bkspc |
    * |-----------------------------------------------------------------------------------------+
    * |   Fn    |  A  |  S  |  D  |  F  |  G  |  H  |  J  |  K  |  L  |  ;  |  '  |    Enter    |
    * |-----------------------------------------------------------------------------------------+
@@ -17,8 +17,8 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
    */
 
   LAYOUT_directional(
-      KC_GRAVE, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, _______, KC_BSPC,
-      KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS,
+      KC_GRAVE, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, _______, KC_BSLS,
+      KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSPC,
       MO(1), KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT,
       KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, _______, RSFT_T(KC_SLSH) , KC_UP, KC_ESCAPE,
       KC_LCTL, KC_LALT, KC_LGUI, KC_SPC, KC_SPC, KC_SPC, KC_RALT, MO(1), KC_LEFT, KC_DOWN, KC_RIGHT

keyboards/dz60/keymaps/billiams/readme.md

@@ -12,6 +12,7 @@ Settings:
 * RESET is available as `Fn`+ ` ESC`
 * Underglow toggle is available as `Fn` + `Q`. Yes your keyboard has lights even if you didn't get the LEDs. Bonus!
 * vim-style arrow key bindings H J K L in layer 1
+* The `Bkspc` and `\` keys have been swapped, the reach was too great to have backspace on the top row
 
 ### Initial Installation
 
@@ -35,16 +36,16 @@ A hex file `dz60_billiams.hex` will be created in the base qmk_firmware director
 5. Holding those keys down, plug the keyboard into your computer, which will put the keyboard in bootlegger mode
 6. If you are using [QMK toolbox](https://github.com/qmk/qmk_toolbox/releases), upload the .hex file you made above, select it and hit the flash button. For the love of all that is good and holy on Earth, don't hit the load button, that will load the default keymap and that's not what you want! Unless it is, in which case click away.
 
-Note: If you didn't follow my instructions in 4 and accidentally loaded the default keymap, then to `RESET` the keyboard and kick it into bootleg mode again, hold the `down arrow` key and `\`. The default layout is Build 1 and sets the `MENU` key on that build to `Fn`. `MENU` corresponds to `down arrow` in build 4. Note that you don't have to unplug the keyboard. 
+Note: If you didn't follow my instructions in 4 and accidentally loaded the default keymap, then to `RESET` the keyboard and kick it into bootleg mode again, hold the `down arrow` key and `\`. The default layout is Build 1 and sets the `MENU` key on that build to `Fn`. `MENU` corresponds to `down arrow` in build 4. Note that you don't have to unplug the keyboard.
 
 Hope this helps!
 
 ### 0 Qwerty
 ```
 ,-----------------------------------------------------------------------------------------.
-|  `  |  1  |  2  |  3  |  4  |  5  |  6  |  7  |  8  |  9  |  0  |  -  |  =  |   Bkspc   |
+|  `  |  1  |  2  |  3  |  4  |  5  |  6  |  7  |  8  |  9  |  0  |  -  |  =  |     \     |
 |-----------------------------------------------------------------------------------------+
-| Tab    |  Q  |  W  |  E  |  R  |  T  |  Y  |  U  |  I  |  O  |  P  |  [  |  ]  |    \   |
+| Tab    |  Q  |  W  |  E  |  R  |  T  |  Y  |  U  |  I  |  O  |  P  |  [  |  ]  | Bkspc  |
 |-----------------------------------------------------------------------------------------+
 |   Fn    |  A  |  S  |  D  |  F  |  G  |  H  |  J  |  K  |  L  |  ;  |  '  |    Enter    |
 |-----------------------------------------------------------------------------------------+
@@ -69,4 +70,3 @@ FN Layer
 |      |       |       |                                 |     |     | HOME | PG_DN | END |
 `-----------------------------------------------------------------------------------------'
 ```
-

keyboards/dztech/dz60rgb/keymaps/matthewrobo/keymap.c

@@ -146,7 +146,7 @@ void rgb_matrix_indicators_user(void)
 			break;
 
 		case _RGB: {
-			HSV hsv = { rgb_matrix_config.hue, rgb_matrix_config.sat, rgb_matrix_config.val };
+			HSV hsv = { rgb_matrix_config.hsv.h, rgb_matrix_config.hsv.s, rgb_matrix_config.hsv.v };
 			HSV hui = hsv;
 			HSV hud = hsv;
 			HSV sai = hsv;

keyboards/felix/config.h

@@ -1,5 +1,4 @@
-#ifndef CONFIG_H
-#define CONFIG_H
+#pragma once
 
 #include "config_common.h"
 
@@ -9,40 +8,225 @@
 #define DEVICE_VER      0x0001
 #define MANUFACTURER    Unikeyboard
 #define PRODUCT         Felix
-#define DESCRIPTION     4x5 number/macropad.
+#define DESCRIPTION     4x5 number/macropad
 
 /* key matrix size */
 #define MATRIX_ROWS 5
 #define MATRIX_COLS 4
 
-/* key matrix pins */
+/*
+ * Keyboard Matrix Assignments
+ *
+ * Change this to how you wired your keyboard
+ * COLS: AVR pins used for columns, left to right
+ * ROWS: AVR pins used for rows, top to bottom
+ * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
+ *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
+ *
+*/
 #define MATRIX_ROW_PINS { B2, B3, B1, F7, F6 }
 #define MATRIX_COL_PINS { B5, B4, E6, D7 }
 #define UNUSED_PINS
 
-/* COL2ROW or ROW2COL */
+/* COL2ROW, ROW2COL */
 #define DIODE_DIRECTION ROW2COL
 
-/* number of backlight levels */
-/* Not sure what pin controls the backlighting, need help for this. */
-#define BACKLIGHT_PIN
-#define BACKLIGHT_LEVELS 5
+/*
+ * Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN.
+ */
+#define SOFT_SERIAL_PIN D0 // or D1, D2, D3, E6
 
-/* Set 0 if debouncing isn't needed */
+#define BACKLIGHT_PIN C6
+#define BACKLIGHT_LEVELS 5
+//#define BACKLIGHT_BREATHING
+
+// #define RGB_DI_PIN E2
+// #ifdef RGB_DI_PIN
+//   #define RGBLED_NUM 16
+//   #define RGBLIGHT_HUE_STEP 8
+//   #define RGBLIGHT_SAT_STEP 8
+//   #define RGBLIGHT_VAL_STEP 8
+//   #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
+//   #define RGBLIGHT_SLEEP  /* If defined, the RGB lighting will be switched off when the host goes to sleep */
+// /*== all animations enable ==*/
+//   #define RGBLIGHT_ANIMATIONS
+// /*== or choose animations ==*/
+//   #define RGBLIGHT_EFFECT_BREATHING
+//   #define RGBLIGHT_EFFECT_RAINBOW_MOOD
+//   #define RGBLIGHT_EFFECT_RAINBOW_SWIRL
+//   #define RGBLIGHT_EFFECT_SNAKE
+//   #define RGBLIGHT_EFFECT_KNIGHT
+//   #define RGBLIGHT_EFFECT_CHRISTMAS
+//   #define RGBLIGHT_EFFECT_STATIC_GRADIENT
+//   #define RGBLIGHT_EFFECT_RGB_TEST
+//   #define RGBLIGHT_EFFECT_ALTERNATING
+// /*== customize breathing effect ==*/
+//   /*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
+//   #define RGBLIGHT_BREATHE_TABLE_SIZE 256      // 256(default) or 128 or 64
+//   /*==== use exp() and sin() ====*/
+//   #define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85  // 1 to 2.7
+//   #define RGBLIGHT_EFFECT_BREATHE_MAX    255   // 0 to 255
+// #endif
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
 #define DEBOUNCE 5
 
+/* define if matrix has ghost (lacks anti-ghosting diodes) */
+//#define MATRIX_HAS_GHOST
+
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE
-
 /* Locking resynchronize hack */
 #define LOCKING_RESYNC_ENABLE
 
-/* there is no rgb underglow by default. */
-#define RGB_DI_PIN
-#define RGBLIGHT_ANIMATIONS
-#define RGBLED_NUM 16
-#define RGBLIGHT_HUE_STEP 8
-#define RGBLIGHT_SAT_STEP 8
-#define RGBLIGHT_VAL_STEP 8
+/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
+ * This is userful for the Windows task manager shortcut (ctrl+shift+esc).
+ */
+// #define GRAVE_ESC_CTRL_OVERRIDE
 
+/*
+ * Force NKRO
+ *
+ * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
+ * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
+ * makefile for this to work.)
+ *
+ * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
+ * until the next keyboard reset.
+ *
+ * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
+ * fully operational during normal computer usage.
+ *
+ * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
+ * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
+ * bootmagic, NKRO mode will always be enabled until it is toggled again during a
+ * power-up.
+ *
+ */
+//#define FORCE_NKRO
+
+/*
+ * Magic Key Options
+ *
+ * Magic keys are hotkey commands that allow control over firmware functions of
+ * the keyboard. They are best used in combination with the HID Listen program,
+ * found here: https://www.pjrc.com/teensy/hid_listen.html
+ *
+ * The options below allow the magic key functionality to be changed. This is
+ * useful if your keyboard/keypad is missing keys and you want magic key support.
+ *
+ */
+
+/* key combination for magic key command */
+/* defined by default; to change, uncomment and set to the combination you want */
+// #define IS_COMMAND() (get_mods() == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)))
+
+/* control how magic key switches layers */
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS  true
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS  true
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false
+
+/* override magic key keymap */
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM
+//#define MAGIC_KEY_HELP           H
+//#define MAGIC_KEY_HELP_ALT       SLASH
+//#define MAGIC_KEY_DEBUG          D
+//#define MAGIC_KEY_DEBUG_MATRIX   X
+//#define MAGIC_KEY_DEBUG_KBD      K
+//#define MAGIC_KEY_DEBUG_MOUSE    M
+//#define MAGIC_KEY_VERSION        V
+//#define MAGIC_KEY_STATUS         S
+//#define MAGIC_KEY_CONSOLE        C
+//#define MAGIC_KEY_LAYER0         0
+//#define MAGIC_KEY_LAYER0_ALT     GRAVE
+//#define MAGIC_KEY_LAYER1         1
+//#define MAGIC_KEY_LAYER2         2
+//#define MAGIC_KEY_LAYER3         3
+//#define MAGIC_KEY_LAYER4         4
+//#define MAGIC_KEY_LAYER5         5
+//#define MAGIC_KEY_LAYER6         6
+//#define MAGIC_KEY_LAYER7         7
+//#define MAGIC_KEY_LAYER8         8
+//#define MAGIC_KEY_LAYER9         9
+//#define MAGIC_KEY_BOOTLOADER     B
+//#define MAGIC_KEY_BOOTLOADER_ALT ESC
+//#define MAGIC_KEY_LOCK           CAPS
+//#define MAGIC_KEY_EEPROM         E
+//#define MAGIC_KEY_EEPROM_CLEAR   BSPACE
+//#define MAGIC_KEY_NKRO           N
+//#define MAGIC_KEY_SLEEP_LED      Z
+
+/*
+ * Feature disable options
+ *  These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+//#define NO_DEBUG
+
+/* disable print */
+//#define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+//#define NO_ACTION_MACRO
+//#define NO_ACTION_FUNCTION
+
+/*
+ * MIDI options
+ */
+
+/* Prevent use of disabled MIDI features in the keymap */
+//#define MIDI_ENABLE_STRICT 1
+
+/* enable basic MIDI features:
+   - MIDI notes can be sent when in Music mode is on
+*/
+//#define MIDI_BASIC
+
+/* enable advanced MIDI features:
+   - MIDI notes can be added to the keymap
+   - Octave shift and transpose
+   - Virtual sustain, portamento, and modulation wheel
+   - etc.
+*/
+//#define MIDI_ADVANCED
+
+/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
+//#define MIDI_TONE_KEYCODE_OCTAVES 1
+
+/*
+ * HD44780 LCD Display Configuration
+ */
+/*
+#define LCD_LINES           2     //< number of visible lines of the display
+#define LCD_DISP_LENGTH    16     //< visibles characters per line of the display
+
+#define LCD_IO_MODE      1            //< 0: memory mapped mode, 1: IO port mode
+
+#if LCD_IO_MODE
+#define LCD_PORT         PORTB        //< port for the LCD lines
+#define LCD_DATA0_PORT   LCD_PORT     //< port for 4bit data bit 0
+#define LCD_DATA1_PORT   LCD_PORT     //< port for 4bit data bit 1
+#define LCD_DATA2_PORT   LCD_PORT     //< port for 4bit data bit 2
+#define LCD_DATA3_PORT   LCD_PORT     //< port for 4bit data bit 3
+#define LCD_DATA0_PIN    4            //< pin for 4bit data bit 0
+#define LCD_DATA1_PIN    5            //< pin for 4bit data bit 1
+#define LCD_DATA2_PIN    6            //< pin for 4bit data bit 2
+#define LCD_DATA3_PIN    7            //< pin for 4bit data bit 3
+#define LCD_RS_PORT      LCD_PORT     //< port for RS line
+#define LCD_RS_PIN       3            //< pin  for RS line
+#define LCD_RW_PORT      LCD_PORT     //< port for RW line
+#define LCD_RW_PIN       2            //< pin  for RW line
+#define LCD_E_PORT       LCD_PORT     //< port for Enable line
+#define LCD_E_PIN        1            //< pin  for Enable line
 #endif
+*/
+
+/* Bootmagic Lite key configuration */
+// #define BOOTMAGIC_LITE_ROW 0
+// #define BOOTMAGIC_LITE_COLUMN 0

keyboards/felix/felix.h

@@ -1,5 +1,4 @@
-#ifndef FELIX_H
-#define FELIX_H
+#pragma once
 
 #include "quantum.h"
 
@@ -18,5 +17,3 @@
 }
 
 #define LAYOUT LAYOUT_ortho_5x4
-
-#endif

keyboards/felix/info.json

@@ -6,7 +6,28 @@
   "height": 5,
   "layouts": {
     "LAYOUT_ortho_5x4": {
-      "layout": [{"label":"K000", "x":0, "y":0}, {"label":"K001", "x":1, "y":0}, {"label":"K002", "x":2, "y":0}, {"label":"K003", "x":3, "y":0}, {"label":"K100", "x":0, "y":1}, {"label":"K101", "x":1, "y":1}, {"label":"K102", "x":2, "y":1}, {"label":"K103", "x":3, "y":1}, {"label":"K200", "x":0, "y":2}, {"label":"K201", "x":1, "y":2}, {"label":"K202", "x":2, "y":2}, {"label":"K203", "x":3, "y":2}, {"label":"K300", "x":0, "y":3}, {"label":"K301", "x":1, "y":3}, {"label":"K302", "x":2, "y":3}, {"label":"K303", "x":3, "y":3}, {"label":"K400", "x":0, "y":4}, {"label":"K401", "x":1, "y":4}, {"label":"K402", "x":2, "y":4}, {"label":"K403", "x":3, "y":4}]
+      "layout": [
+        {"label":"K000", "x":0, "y":0},
+        {"label":"K001", "x":1, "y":0},
+        {"label":"K002", "x":2, "y":0},
+        {"label":"K003", "x":3, "y":0},
+        {"label":"K100", "x":0, "y":1},
+        {"label":"K101", "x":1, "y":1},
+        {"label":"K102", "x":2, "y":1},
+        {"label":"K103", "x":3, "y":1},
+        {"label":"K200", "x":0, "y":2},
+        {"label":"K201", "x":1, "y":2},
+        {"label":"K202", "x":2, "y":2},
+        {"label":"K203", "x":3, "y":2},
+        {"label":"K300", "x":0, "y":3},
+        {"label":"K301", "x":1, "y":3},
+        {"label":"K302", "x":2, "y":3},
+        {"label":"K303", "x":3, "y":3},
+        {"label":"K400", "x":0, "y":4},
+        {"label":"K401", "x":1, "y":4},
+        {"label":"K402", "x":2, "y":4},
+        {"label":"K403", "x":3, "y":4}
+      ]
     }
   }
 }

keyboards/felix/keymaps/default/keymap.c

@@ -1,22 +1,11 @@
 #include QMK_KEYBOARD_H
 
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-
-  LAYOUT(
-    KC_NLCK, KC_PSLS, KC_PAST, KC_PMNS,
-    KC_P7,   KC_P8,   KC_P9,   KC_PPLS,
-    KC_P4,   KC_P5,   KC_P6,   KC_HOME,
-    KC_P1,   KC_P2,   KC_P3,   KC_END,
-    KC_P0,   KC_PEQL, KC_PDOT, KC_PENT
-  ),
-
+    LAYOUT_ortho_5x4(
+        KC_NLCK, KC_PSLS, KC_PAST, KC_PMNS,
+        KC_P7,   KC_P8,   KC_P9,   KC_PPLS,
+        KC_P4,   KC_P5,   KC_P6,   KC_HOME,
+        KC_P1,   KC_P2,   KC_P3,   KC_END,
+        KC_P0,   KC_PEQL, KC_PDOT, KC_PENT
+    )
 };
-
-void persistant_default_layer_set(uint16_t default_layer) {
-}
-
-bool process_record_user(uint16_t keycode, keyrecord_t *record) {
-  switch (keycode) {
-  }
-  return true;
-}

keyboards/felix/readme.md

@@ -10,4 +10,4 @@ Make example for this keyboard (after setting up your build environment):
 
     make felix:default
 
-See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) then the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information.
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

keyboards/felix/rules.mk

@@ -37,22 +37,34 @@ F_USB = $(F_CPU)
 OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
 
 
-# Boot Section Size in *bytes*
-OPT_DEFS += -DBOOTLOADER_SIZE=4096
+# Bootloader selection
+#   Teensy       halfkay
+#   Pro Micro    caterina
+#   Atmel DFU    atmel-dfu
+#   LUFA DFU     lufa-dfu
+#   QMK DFU      qmk-dfu
+#   atmega32a    bootloadHID
+BOOTLOADER = caterina
 
 
 # Build Options
-#   comment out to disable the options.
+#   change yes to no to disable
 #
-BOOTMAGIC_ENABLE = yes	# Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE = yes	# Mouse keys(+4700)
-EXTRAKEY_ENABLE = yes	# Audio control and System control(+450)
-CONSOLE_ENABLE = no	# Console for debug(+400)
-COMMAND_ENABLE = no    # Commands for debug and configuration
-SLEEP_LED_ENABLE = no  # Breathing sleep LED during USB suspend
-NKRO_ENABLE = yes		# USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-BACKLIGHT_ENABLE = no  # Enable keyboard backlight functionality
-AUDIO_ENABLE = no
-RGBLIGHT_ENABLE = no
+BOOTMAGIC_ENABLE = yes      # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
+CONSOLE_ENABLE = no         # Console for debug(+400)
+COMMAND_ENABLE = no         # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
+NKRO_ENABLE = yes           # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+BACKLIGHT_ENABLE = yes      # Enable keyboard backlight functionality
+RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
+MIDI_ENABLE = no            # MIDI support (+2400 to 4200, depending on config)
+UNICODE_ENABLE = no         # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+AUDIO_ENABLE = no           # Audio output on port C6
+FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
+HD44780_ENABLE = no 		# Enable support for HD44780 based LCDs (+400)
 
 LAYOUTS = ortho_5x4

keyboards/handwired/promethium/rules.mk

@@ -47,7 +47,7 @@ OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
 OPT_DEFS += -DBOOTLOADER_SIZE=4096
 
 # Build Options
-#   change to "no" to disable the options, or define them in the Makefile in 
+#   change to "no" to disable the options, or define them in the Makefile in
 #   the appropriate keymap folder that will get included automatically
 #
 BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration(+1000)
@@ -62,7 +62,7 @@ AUDIO_ENABLE = no           # Audio output on port C6
 UNICODE_ENABLE = no         # Unicode
 UNICODEMAP_ENABLE = yes
 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
-RGBLIGHT_ENABLE = no        # Enable WS2812 RGB underlight. 
+RGBLIGHT_ENABLE = no        # Enable WS2812 RGB underlight.
 PS2_MOUSE_ENABLE = yes
 PS2_USE_INT = yes
 API_SYSEX_ENABLE = no
@@ -76,3 +76,5 @@ SRC += ws2812.c
 SRC += rgbsps.c
 SRC += analog.c
 SRC += matrix.c
+
+LINK_TIME_OPTIMIZATION_ENABLE = yes

keyboards/handwired/wulkan/README.md

@@ -0,0 +1,14 @@
+# wulkan
+
+Handwired 40% keyboard build with Proton C.
+
+Keyboard Maintainer: [Napoleon Wulkan](https://github.com/wulkan)  
+Hardware Supported: Proton C  
+Hardware Availability: [OLKB.com](https://olkb.com)
+
+
+Make example for this keyboard (after setting up your build environment):
+
+    make handwired/wulkan:default:dfu-util
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

keyboards/handwired/wulkan/config.h

@@ -0,0 +1,23 @@
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0xFEED
+#define PRODUCT_ID      0x6060
+#define DEVICE_VER      0x0001
+#define MANUFACTURER    Wulkan
+#define PRODUCT         Handwired48Keys
+#define DESCRIPTION     A compact ortholinear handwired keyboard
+
+/* key matrix size */
+#define MATRIX_ROWS 4
+#define MATRIX_COLS 12
+
+#define MATRIX_ROW_PINS { B8, A0, A1, A2 }
+#define MATRIX_COL_PINS { B13, B14, B15, B9, B7, B6, B5, B4, B3, B2, B1, B0 }
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCE 5
+
+#define FORCE_NKRO

keyboards/handwired/wulkan/info.json

@@ -0,0 +1,13 @@
+{
+    "keyboard_name": "wulkan",
+    "url": "",
+    "maintainer": "Napoleon Wulkan",
+    "width": 12,
+    "height": 4,
+    "layouts": {
+      "LAYOUT_ortho_4x12": {
+        "key_count": 48,
+        "layout": [{"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":4, "y":0}, {"x":5, "y":0}, {"x":6, "y":0}, {"x":7, "y":0}, {"x":8, "y":0}, {"x":9, "y":0}, {"x":10, "y":0}, {"x":11, "y":0}, {"x":0, "y":1}, {"x":1, "y":1}, {"x":2, "y":1}, {"x":3, "y":1}, {"x":4, "y":1}, {"x":5, "y":1}, {"x":6, "y":1}, {"x":7, "y":1}, {"x":8, "y":1}, {"x":9, "y":1}, {"x":10, "y":1}, {"x":11, "y":1}, {"x":0, "y":2}, {"x":1, "y":2}, {"x":2, "y":2}, {"x":3, "y":2}, {"x":4, "y":2}, {"x":5, "y":2}, {"x":6, "y":2}, {"x":7, "y":2}, {"x":8, "y":2}, {"x":9, "y":2}, {"x":10, "y":2}, {"x":11, "y":2}, {"x":0, "y":3}, {"x":1, "y":3}, {"x":2, "y":3}, {"x":3, "y":3}, {"x":4, "y":3}, {"x":5, "y":3}, {"x":6, "y":3}, {"x":7, "y":3}, {"x":8, "y":3}, {"x":9, "y":3}, {"x":10, "y":3}, {"x":11, "y":3}]
+      }
+    }
+  }

keyboards/handwired/wulkan/keymaps/default/keymap.c

@@ -0,0 +1,111 @@
+#include QMK_KEYBOARD_H
+
+enum layers {
+  _QWERTY,
+  _LOWER,
+  _RAISE,
+  _ADJUST,
+};
+
+enum unicode_names {
+  SE_AA_HIGH,
+  SE_AE_HIGH,
+  SE_OE_HIGH,
+  SE_AA_LOW,
+  SE_AE_LOW,
+  SE_OE_LOW,
+};
+
+const uint32_t PROGMEM unicode_map[] = {
+  [SE_AA_HIGH] = 0x00C5,
+  [SE_AE_HIGH] = 0x00C4,
+  [SE_OE_HIGH] = 0x00D6,
+  [SE_AA_LOW]  = 0x00E5,
+  [SE_AE_LOW]  = 0x00E4,
+  [SE_OE_LOW]  = 0x00F6,
+};
+
+#define LOWER  MO(_LOWER)
+#define RAISE  MO(_RAISE)
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+/* Qwerty
+ * ,-----------------------------------------------------------------------------------.
+ * | Tab  |   Q  |   W  |   E  |   R  |   T  |   Y  |   U  |   I  |   O  |   P  | Bksp |
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * | Esc  |   A  |   S  |   D  |   F  |   G  |   H  |   J  |   K  |   L  |   ;  |  "   |
+ * |------+------+------+------+------+------|------+------+------+------+------+------|
+ * | Shift|   Z  |   X  |   C  |   V  |   B  |   N  |   M  |   ,  |   .  |   /  |Shift |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * |      | Ctrl | Alt  | GUI  |Lower |Enter |Space |Raise | Left | Down |  Up  |Right |
+ * `-----------------------------------------------------------------------------------'
+ */
+[_QWERTY] = LAYOUT_ortho_4x12(
+  KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_BSPC,
+  KC_ESC,  KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT,
+  KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_RSFT,
+  _______, KC_LCTL, KC_LALT, KC_LGUI, LOWER,   KC_ENT,  KC_SPC,  RAISE,   KC_LEFT, KC_DOWN, KC_UP,   KC_RGHT
+),
+
+/* Lower
+ * ,-----------------------------------------------------------------------------------.
+ * |   ~  |   !  |   @  |   #  |   $  |   %  |   ^  |   &  |   *  |   (  |   )  | Bksp |
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * | Del  |  F1  |  F2  |  F3  |  F4  |  F5  |  F6  |   _  |   +  |   {  |   }  |  |   |
+ * |------+------+------+------+------+------|------+------+------+------+------+------|
+ * |      |  F7  |  F8  |  F9  |  F10 |  F11 |  F12 |ISO ~ |ISO | |      |      |      |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * |      |      |      |      |      |      |      |      | Next | Vol- | Vol+ | Play |
+ * `-----------------------------------------------------------------------------------'
+ */
+[_LOWER] = LAYOUT_ortho_4x12(
+  KC_TILD, KC_EXLM, KC_AT,   KC_HASH, KC_DLR,  KC_PERC, KC_CIRC, KC_AMPR,    KC_ASTR,    KC_LPRN, KC_RPRN, KC_BSPC,
+  KC_DEL,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_UNDS,    KC_PLUS,    KC_LCBR, KC_RCBR, KC_PIPE,
+  _______, KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  S(KC_NUHS), S(KC_NUBS), _______, _______, _______,
+  _______, _______, _______, _______, _______, _______, _______, _______,    KC_MNXT,    KC_VOLD, KC_VOLU, KC_MPLY
+),
+
+/* Raise
+ * ,-----------------------------------------------------------------------------------.
+ * |   `  |   1  |   2  |   3  |   4  |   5  |   6  |   7  |   8  |   9  |   0  |  Del |
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * | Del  |  F1  |  F2  |  F3  |  F4  |  F5  |  F6  |   -  |   =  |   [  |   ]  |  \   |
+ * |------+------+------+------+------+------|------+------+------+------+------+------|
+ * |      |  F7  |  F8  |  F9  |  F10 |  F11 |  F12 |ISO # |ISO / |      |      |      |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * |      |      |      |      |      |      |      |      | Next | Vol- | Vol+ | Play |
+ * `-----------------------------------------------------------------------------------'
+ */
+[_RAISE] = LAYOUT_ortho_4x12(
+  KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_DEL,
+  KC_DEL,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_MINS, KC_EQL,  KC_LBRC, KC_RBRC, KC_BSLS,
+  _______, KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_NUHS, KC_NUBS, _______, _______, _______,
+  _______, _______, _______, _______, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY
+),
+
+/* Adjust (Lower + Raise)
+ * ,-----------------------------------------------------------------------------------.
+ * |      | Reset|      |      |      |      |      |      |      |      |   Å  |  Del |
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * |      |      |      |      |      |      |      |      |      |   Ö  |   Ä  |      |
+ * |------+------+------+------+------+------|------+------+------+------+------+------|
+ * |      |      |      |      |      |      |      |      |      |      |      |      |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * |      |      |      |      |      |      |      |      |      |      |      |      |
+ * `-----------------------------------------------------------------------------------'
+ */
+[_ADJUST] = LAYOUT_ortho_4x12(
+  _______, RESET,   _______, _______, KC_WH_U, _______, _______, KC_MS_U, _______, _______,                   XP(SE_AA_LOW, SE_AA_HIGH), KC_DEL,
+  _______, _______, _______, _______, KC_WH_D, _______, KC_MS_L, KC_MS_D, KC_MS_R, XP(SE_OE_LOW, SE_OE_HIGH), XP(SE_AE_LOW, SE_AE_HIGH), _______,
+  _______, KC_ACL0, KC_ACL1, KC_ACL2, _______, _______, KC_BTN1, _______, KC_BTN2, _______,                   _______,                   _______,
+  _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,                   _______,                   _______
+)
+};
+
+uint32_t layer_state_set_user(uint32_t state) {
+  return update_tri_layer_state(state, _LOWER, _RAISE, _ADJUST);
+}
+
+void eeconfig_init_user(void) {
+  set_unicode_input_mode(UC_LNX);
+}

keyboards/handwired/wulkan/keymaps/default/rules.mk

@@ -0,0 +1 @@
+UNICODEMAP_ENABLE = yes

keyboards/handwired/wulkan/rules.mk

@@ -0,0 +1,22 @@
+MCU = STM32F303
+
+# Build Options
+#   comment out to disable the options.
+#
+BACKLIGHT_ENABLE = no
+BOOTMAGIC_ENABLE = yes      # Virtual DIP switch configuration
+MOUSEKEY_ENABLE = yes       # Mouse keys
+EXTRAKEY_ENABLE = yes       # Audio control and System control
+CONSOLE_ENABLE = no         # Console for debug
+COMMAND_ENABLE = no         # Commands for debug and configuration
+NKRO_ENABLE = yes           # USB Nkey Rollover
+AUDIO_ENABLE = no
+RGBLIGHT_ENABLE = no
+LAYOUTS = ortho_4x12
+MIDI_ENABLE = no            # MIDI support (+2400 to 4200, depending on config)
+UNICODE_ENABLE = no         # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
+HD44780_ENABLE = no 		# Enable support for HD44780 based LCDs (+400)
+NO_SUSPEND_POWER_DOWN = yes
+UNICODEMAP_ENABLE = no

keyboards/handwired/wulkan/wulkan.c

@@ -0,0 +1,6 @@
+#include "wulkan.h"
+
+void matrix_init_kb(void) {
+  matrix_init_user();
+}
+

keyboards/handwired/wulkan/wulkan.h

@@ -0,0 +1,21 @@
+#pragma once
+
+#include "quantum.h"
+
+#define ___ KC_NO
+
+#define LAYOUT_ortho_4x12( \
+    K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, \
+    K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, \
+    K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, \
+    K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B  \
+) \
+{ \
+    { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B }, \
+    { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B }, \
+    { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B }, \
+    { K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B }  \
+}
+
+
+#define LAYOUT LAYOUT_ortho_4x12

keyboards/ivy/config.h

@@ -0,0 +1,67 @@
+/*
+Copyright 2012 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0x1337
+#define PRODUCT_ID      0x6012
+#define MANUFACTURER    Maple Computing
+#define PRODUCT         Ivy
+#define DESCRIPTION     A 3 key macro pad
+
+/* key matrix size */
+#define MATRIX_ROWS 3
+#define MATRIX_COLS 3
+
+/* COL2ROW or ROW2COL */
+#define DIODE_DIRECTION COL2ROW
+
+/* define if matrix has ghost */
+//#define MATRIX_HAS_GHOST
+
+/* Set 0 if debouncing isn't needed */
+#define DEBOUNCE 5
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+#define BACKLIGHT_PIN D2
+
+/* number of backlight levels */
+#define BACKLIGHT_LEVELS 3
+
+/*
+ * Feature disable options
+ *  These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+//#define NO_DEBUG
+
+/* disable print */
+//#define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+//#define NO_ACTION_MACRO
+//#define NO_ACTION_FUNCTION

keyboards/ivy/ivy.c

@@ -0,0 +1 @@
+#include "ivy.h"

keyboards/ivy/ivy.h

@@ -0,0 +1,7 @@
+#pragma once
+
+#ifdef KEYBOARD_ivy_rev1
+    #include "rev1.h"
+#endif
+
+#include "quantum.h"

keyboards/ivy/keymaps/default/keymap.c

@@ -0,0 +1,46 @@
+#include QMK_KEYBOARD_H
+
+extern keymap_config_t keymap_config;
+
+// Each layer gets a name for readability, which is then used in the keymap matrix below.
+// The underscores don't mean anything - you can have a layer called STUFF or any other name.
+// Layer names don't all need to be of the same length, obviously, and you can also skip them
+// entirely and just use numbers.
+
+enum pad_layers {
+  _L1,
+  _FUNC
+};
+
+// Defines for task manager and such
+#define CALTDEL LCTL(LALT(KC_DEL))
+#define TSKMGR LCTL(LSFT(KC_ESC))
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+/* Layer 1
+ * ,------.
+ * |  1   |
+ * |------|
+ * |  2   |
+ * |------|
+ * |  FN  |
+ * `------'
+ */
+[_L1] = LAYOUT( \
+    KC_1, \
+    KC_2, \
+    MO(_FUNC)  \
+),
+
+[_FUNC] = LAYOUT( \
+    CALTDEL, \
+    TSKMGR, \
+    _______ \
+)
+
+};
+
+void matrix_init_user(void) {
+
+}

keyboards/ivy/keymaps/default/rules.mk

@@ -0,0 +1,22 @@
+
+
+# Build Options
+#   change to "no" to disable the options, or define them in the Makefile in 
+#   the appropriate keymap folder that will get included automatically
+#
+BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = no       # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
+CONSOLE_ENABLE = no         # Console for debug(+400)
+COMMAND_ENABLE = no        # Commands for debug and configuration
+NKRO_ENABLE = yes            # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+BACKLIGHT_ENABLE = yes      # Enable keyboard backlight functionality
+MIDI_ENABLE = no            # MIDI controls
+AUDIO_ENABLE = no          # Audio output on port C6
+UNICODE_ENABLE = no         # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+RGBLIGHT_ENABLE = no        # Enable WS2812 RGB underlight. 
+
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no    # Breathing sleep LED during USB suspend
+

keyboards/ivy/readme.md

@@ -0,0 +1,15 @@
+IVY
+===
+
+![Ivy](https://i.imgur.com/fnVQet6.jpg)
+
+Make example for this keyboard (after setting up your build environment):
+
+    make ivy/rev1:default
+    
+Install examples:
+
+    make ivy/rev1:default:dfu
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information.
+Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

keyboards/ivy/rev1/config.h

@@ -0,0 +1,27 @@
+/*
+Copyright 2012 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+#define DEVICE_VER      0x0001
+
+/* Let's Macro V2 pin-out */
+#define MATRIX_ROW_PINS { F1, B2, D3 }
+#define MATRIX_COL_PINS { F5, B3, D5 }
+#define UNUSED_PINS
+
+#define DIODE_DIRECTION COL2ROW

keyboards/ivy/rev1/rev1.c

@@ -0,0 +1,5 @@
+#include "ivy.h"
+
+void matrix_init_kb(void) {
+	matrix_init_user();
+};

keyboards/ivy/rev1/rev1.h

@@ -0,0 +1,14 @@
+#pragma once
+
+#include "ivy.h"
+
+#define LAYOUT( \
+	K00, \
+    K01, \
+    K02  \
+	) \
+	{ \
+		{ K00, KC_NO, KC_NO }, \
+		{ KC_NO, K01, KC_NO }, \
+		{ KC_NO, KC_NO, K02 }, \
+	}

keyboards/ivy/rev1/rules.mk

@@ -0,0 +1,3 @@
+BACKLIGHT_ENABLE = yes
+RGBLIGHT_ENABLE = no
+AUDIO_ENABLE = no

keyboards/ivy/rules.mk

@@ -0,0 +1,67 @@
+# MCU name
+#MCU = at90usb1287
+MCU = atmega32u4
+
+# Processor frequency.
+#     This will define a symbol, F_CPU, in all source code files equal to the
+#     processor frequency in Hz. You can then use this symbol in your source code to
+#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+#     automatically to create a 32-bit value in your source code.
+#
+#     This will be an integer division of F_USB below, as it is sourced by
+#     F_USB after it has run through any CPU prescalers. Note that this value
+#     does not *change* the processor frequency - it should merely be updated to
+#     reflect the processor speed set externally so that the code can use accurate
+#     software delays.
+F_CPU = 16000000
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+#     This will define a symbol, F_USB, in all source code files equal to the
+#     input clock frequency (before any prescaling is performed) in Hz. This value may
+#     differ from F_CPU if prescaling is used on the latter, and is required as the
+#     raw input clock is fed directly to the PLL sections of the AVR for high speed
+#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+#     at the end, this will be done automatically to create a 32-bit value in your
+#     source code.
+#
+#     If no clock division is performed on the input clock inside the AVR (via the
+#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Bootloader
+#     This definition is optional, and if your keyboard supports multiple bootloaders of
+#     different sizes, comment this out, and the correct address will be loaded 
+#     automatically (+60). See bootloader.mk for all options.
+BOOTLOADER = caterina
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+# Build Options
+#   change to "no" to disable the options, or define them in the Makefile in 
+#   the appropriate keymap folder that will get included automatically
+#
+BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = no       # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
+CONSOLE_ENABLE = no         # Console for debug(+400)
+COMMAND_ENABLE = yes        # Commands for debug and configuration
+NKRO_ENABLE = no            # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+BACKLIGHT_ENABLE = no      # Enable keyboard backlight functionality
+MIDI_ENABLE = no            # MIDI controls
+AUDIO_ENABLE = no           # Audio output on port C6
+UNICODE_ENABLE = no         # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+RGBLIGHT_ENABLE = no        # Enable WS2812 RGB underlight.
+API_SYSEX_ENABLE = no
+
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no    # Breathing sleep LED during USB suspend
+
+DEFAULT_FOLDER = ivy/rev1

keyboards/kbdfans/kbd67/hotswap/keymaps/stevanmilic/config.h

@@ -0,0 +1,19 @@
+#pragma once
+
+#define FORCE_NKRO
+
+#define MOUSEKEY_DELAY             50
+#define MOUSEKEY_INTERVAL          15
+#define MOUSEKEY_MAX_SPEED         4
+#define MOUSEKEY_TIME_TO_MAX       50
+#define MOUSEKEY_WHEEL_MAX_SPEED   1
+#define MOUSEKEY_WHEEL_TIME_TO_MAX 50
+
+#define NO_ACTION_FUNCTION
+#define NO_ACTION_MACRO
+#define NO_ACTION_ONESHOT
+
+#define PERMISSIVE_HOLD
+#define TAPPING_TERM        200
+#define TAPPING_TOGGLE      2
+#define TAP_HOLD_CAPS_DELAY 50

keyboards/kbdfans/kbd67/hotswap/keymaps/stevanmilic/keymap.c

@@ -0,0 +1,79 @@
+#include QMK_KEYBOARD_H
+
+#define FN      MO(L_FN)
+#define FN_CAPS LT(L_FN, KC_CAPS)
+#define FN_ESC  LT(L_FN, KC_ESC)
+#define FN_FNLK TT(L_FN)
+
+#define MV_UP   LCTL(KC_UP)
+#define MV_DOWN LCTL(KC_DOWN)
+#define MV_LEFT LCTL(KC_LEFT)
+#define MV_RGHT LCTL(KC_RGHT)
+#define TOP     LCTL(KC_HOME)
+#define BOTTOM  LCTL(KC_END)
+
+enum keycodes {
+    CLEAR = SAFE_RANGE,
+};
+
+enum layers {
+    L_BASE,
+    L_FN,
+};
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+    switch (keycode) {
+    case CLEAR:
+        if (record->event.pressed) {
+            SEND_STRING(SS_LCTRL("a") SS_TAP(X_DELETE));
+        }
+        return false;
+
+    default:
+        return true;
+    }
+}
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+    /* Base layer
+     * ┌───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┐
+     * │ ` │ 1 │ 2 │ 3 │ 4 │ 5 │ 6 │ 7 │ 8 │ 9 │ 0 │ - │ = │ \ │ ` │PSc│
+     * ├───┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴───┼───┤
+     * │ Tab │ Q │ W │ E │ R │ T │ Y │ U │ I │ O │ P │ [ │ ] │Bspc │Del│
+     * ├─────┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴─────┼───┤
+     * │FnEsc │ A │ S │ D │ F │ G │ H │ J │ K │ L │ ; │ ' │ Enter  │PgU│
+     * ├──────┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴────┬───┼───┤
+     * │ LShift │ Z │ X │ C │ V │ B │ N │ M │ , │ . │ / │RShift│ ↑ │PgD│
+     * ├────┬───┴┬──┴─┬─┴───┴───┴───┴───┴───┴──┬┴───┼───┴┬─┬───┼───┼───┤
+     * │LCtl│LGui│LAlt│         Space          │RAlt│FnLk│ │ ← │ ↓ │ → │
+     * └────┴────┴────┴────────────────────────┴────┴────┘ └───┴───┴───┘
+     */
+    [L_BASE] = LAYOUT(
+        KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_BSLS, KC_GRV,  KC_PSCR, \
+        KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC, KC_BSPC, KC_DEL,  \
+        FN_ESC,  KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT,          KC_ENT,  KC_PGUP, \
+        KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH,          KC_RSFT, KC_UP,   KC_PGDN, \
+        KC_LCTL, KC_LGUI, KC_LALT,                   KC_SPC,                             KC_RALT, FN_FNLK,          KC_LEFT, KC_DOWN, KC_RGHT  \
+    ),
+
+    /* Function layer
+     * ┌───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┐
+     * │   │F1 │F2 │F3 │F4 │F5 │F6 │F7 │F8 │F9 │F10│F11│F12│NLk│SLk│Pau│
+     * ├───┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴───┼───┤
+     * │     │M2 │M↑ │M1 │M3 │   │   │   │   │Stp│Ply│Prv│Nxt│Clear│Ins│
+     * ├─────┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴─────┼───┤
+     * │      │M← │M↓ │M→ │MW↑│   │   │Mv←│ ↓ │ ↑ │Mv→│   │        │Top│
+     * ├──────┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴────┬───┼───┤
+     * │        │MA0│MA2│MW←│MW→│   │   │App│Vo-│Vo+│Mut│      │PgU│Btm│
+     * ├────┬───┴┬──┴─┬─┴───┴───┴───┴───┴───┴──┬┴───┼───┴┬─┬───┼───┼───┤
+     * │    │DtPR│DtNA│          MW↓           │    │    │ │Hom│PgD│End│
+     * └────┴────┴────┴────────────────────────┴────┴────┘ └───┴───┴───┘
+     */
+    [L_FN] = LAYOUT(
+        _______, KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_NLCK, KC_SLCK, KC_PAUS, \
+        _______, KC_BTN2, KC_MS_U, KC_BTN1, KC_BTN3, _______, _______, _______, _______, KC_MSTP, KC_MPLY, KC_MPRV, KC_MNXT, CLEAR,   KC_INS,  \
+        _______, KC_MS_L, KC_MS_D, KC_MS_R, KC_WH_U, _______, MV_LEFT, KC_DOWN, KC_UP,   MV_RGHT, _______, _______,          _______, TOP,     \
+        _______, KC_ACL0, KC_ACL2, KC_WH_L, KC_WH_R, _______, _______, KC_APP,  KC_VOLD, KC_VOLU, KC_MUTE,          _______, KC_PGUP, BOTTOM,  \
+        _______, _______, _______,                   KC_WH_D,                            _______, _______,          KC_HOME, KC_PGDN, KC_END   \
+    ),
+};

keyboards/kbdfans/kbd67/hotswap/keymaps/stevanmilic/rules.mk

@@ -0,0 +1,6 @@
+BOOTMAGIC_ENABLE  = no
+COMMAND_ENABLE    = yes
+CONSOLE_ENABLE    = yes
+EXTRAKEY_ENABLE   = yes
+MOUSEKEY_ENABLE   = yes
+NKRO_ENABLE       = yes

keyboards/kbdfans/kbd6x/keymaps/konstantin/keymap.c

@@ -10,6 +10,7 @@ enum layers_keymap {
 };
 
 void eeconfig_init_keymap(void) {
+    rgblight_sethsv(MODERN_DOLCH_RED.h, MODERN_DOLCH_RED.s, MODERN_DOLCH_RED.v);
     rgblight_mode(RGBLIGHT_MODE_RAINBOW_SWIRL);
 }
 
@@ -81,7 +82,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
      * ├─────┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴─────┤
      * │      │Mv←│Mv↓│Mv→│TNx│   │   │   │   │   │   │   │        │
      * ├──────┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴────┬───┤
-     * │        │RTg│RV-│RV+│   │   │   │   │M4 │M5 │   │      │   │
+     * │        │RTg│RV-│RV+│RMd│   │   │   │M4 │M5 │   │      │   │
      * └─────┬──┴┬──┴──┬┴───┴───┴───┴───┴───┴───┴──┬┴───┴┬───┬─┴───┘
      *       │DPR│DstNA│                           │     │   │
      *       └───┴─────┴───────────────────────────┴─────┴───┘
@@ -90,7 +91,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
         _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, CLEAR,
         _______, TOP,     MV_UP,   BOTTOM,  TAB_PRV, _______, _______, _______, _______, _______, _______, _______, _______, DEL_NXT,
         _______, MV_LEFT, MV_DOWN, MV_RGHT, TAB_NXT, _______, _______, _______, _______, _______, _______, _______, _______,
-        _______, RGB_TOG, RGB_VAD, RGB_VAI, _______, _______, _______, _______, KC_BTN4, KC_BTN5, _______, _______, _______,
+        _______, RGB_TOG, RGB_VAD, RGB_VAI, RGB_MOD, _______, _______, _______, KC_BTN4, KC_BTN5, _______, _______, _______,
         XXXXXXX, DST_P_R, DST_N_A,                   _______,                   _______, _______, XXXXXXX
     ),
 };

keyboards/keebio/iris/keymaps/osiris/keymap.c

@@ -4,14 +4,17 @@ extern keymap_config_t keymap_config;
 
 enum layer_names {
     _QWERTY,
+    _WORKMAN,
     _LOWER,
     _RAISE,
     _ADJUST
 };
 
 enum custom_keycodes {
-  LOWER = SAFE_RANGE,
-  RAISE,
+  QWERTY = SAFE_RANGE,
+  WORKMAN,
+  LOWER,
+  RAISE
 };
 
 #define KC_ KC_TRNS
@@ -33,9 +36,23 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
   //|----+----+----+----+----+----|              |----+----+----+----+----+----|
      TAB , Q  , W  , E  , R  , T  ,                Y  , U  , I  , O  , P  ,BSLS,
   //|----+----+----+----+----+----|              |----+----+----+----+----+----|
-     LCTL, A  , S  , D  , F  , G  ,                H  , J  , K  , L  ,SCLN,QUOT,
+     LSFT, A  , S  , D  , F  , G  ,                H  , J  , K  , L  ,SCLN,QUOT,
   //|----+----+----+----+----+----+----.    ,----|----+----+----+----+----+----|
-     LSFT, Z  , X  , C  , V  , B  ,LBRC,     RBRC, N  , M  ,COMM,DOT ,SLSH,RSFT,
+     LECL, Z  , X  , C  , V  , B  ,LBRC,     RBRC, N  , M  ,COMM,DOT ,SLSH,RGHT,
+  //`----+----+----+--+-+----+----+----/    \----+----+----+----+----+----+----'
+                       LGUI,LOWR,ENT ,         SPC ,RASE,RALT
+  //                  `----+----+----'        `----+----+----'
+  ),
+
+    [_WORKMAN] = LAYOUT_kc(
+  //,----+----+----+----+----+----.              ,----+----+----+----+----+----.
+     GESC, 1  , 2  , 3  , 4  , 5  ,                6  , 7  , 8  , 9  , 0  ,BSPC,
+  //|----+----+----+----+----+----|              |----+----+----+----+----+----|
+     TAB , Q  , D  , R  , W  , B  ,                J  , F  , U  , P  ,SCLN,BSLS,
+  //|----+----+----+----+----+----|              |----+----+----+----+----+----|
+     LSFT, A  , S  , H  , T  , G  ,                Y  , N  , E  , O  ,I   ,QUOT,
+  //|----+----+----+----+----+----+----.    ,----|----+----+----+----+----+----|
+     LECL, Z  , X  , M  , C  , V  ,LBRC,     RBRC, K  , L  ,COMM,DOT ,SLSH,RGHT,
   //`----+----+----+--+-+----+----+----/    \----+----+----+----+----+----+----'
                        LGUI,LOWR,ENT ,         SPC ,RASE,RALT
   //                  `----+----+----'        `----+----+----'
@@ -45,11 +62,11 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
   //,----+----+----+----+----+----.              ,----+----+----+----+----+----.
      TILD,EXLM, AT ,HASH,DLR ,PERC,               CIRC,AMPR,ASTR,LPRN,RPRN,DEL ,
   //|----+----+----+----+----+----|              |----+----+----+----+----+----|
-         ,    , UP ,    ,    ,    ,                   ,    ,BTN1,    ,    ,    ,
+         ,    ,    ,    ,    ,    ,                   ,    ,BTN1,    ,    ,    ,
   //|----+----+----+----+----+----|              |----+----+----+----+----+----|
-         ,LEFT,DOWN,RGHT,    ,    ,               MS_L,MS_D,MS_U,MS_R,    ,    ,
+         ,    ,    ,    ,    ,    ,               MS_L,MS_D,MS_U,MS_R,    ,    ,
   //|----+----+----+----+----+----+----.    ,----|----+----+----+----+----+----|
-         ,    ,    ,    ,    ,    ,    ,         ,    ,    ,    ,    ,    ,    ,
+         ,    ,    ,    ,    , UP ,    ,         ,    ,    ,    ,    ,    ,    ,
   //`----+----+----+--+-+----+----+----/    \----+----+----+----+----+----+----'
                            ,    ,    ,             ,    ,   
   //                  `----+----+----'        `----+----+----'
@@ -63,7 +80,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
   //|----+----+----+----+----+----|              |----+----+----+----+----+----|
          ,MPLY,VOLD,MNXT,    ,LPRN,               RPRN,MINS,EQL ,    ,    ,    ,
   //|----+----+----+----+----+----+----.    ,----|----+----+----+----+----+----|
-         ,    ,    ,    ,    ,    ,    ,         ,    ,    ,    ,    ,    ,    ,
+         ,    ,    ,    ,    ,    ,    ,         ,DOWN,    ,    ,    ,    ,    ,
   //`----+----+----+--+-+----+----+----/    \----+----+----+----+----+----+----'
                            ,    ,    ,             ,    ,
   //                  `----+----+----'        `----+----+----'
@@ -71,7 +88,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 
   [_ADJUST] = LAYOUT(
   //,--------+--------+--------+--------+--------+--------.                          ,--------+--------+--------+--------+--------+--------.
-      _______, _______, _______, _______, _______, _______,                            _______, _______, _______, _______, _______, _______,
+      _______, _______, _______, _______, _______,  QWERTY,                            WORKMAN, _______, _______, _______, _______, _______,
   //|--------+--------+--------+--------+--------+--------|                          |--------+--------+--------+--------+--------+--------|
       RGB_TOG, RGB_MOD, RGB_HUI, RGB_SAI, RGB_VAI, _______,                            _______, _______, _______, _______, _______, _______,
   //|--------+--------+--------+--------+--------+--------|                          |--------+--------+--------+--------+--------+--------|
@@ -91,6 +108,16 @@ float tone_qwerty[][2]     = SONG(QWERTY_SOUND);
 
 bool process_record_user(uint16_t keycode, keyrecord_t *record) {
   switch (keycode) {
+    case QWERTY:
+      if (record->event.pressed) {
+        set_single_persistent_default_layer(_QWERTY);
+      }
+      return false;
+    case WORKMAN:
+      if (record->event.pressed) {
+        set_single_persistent_default_layer(_WORKMAN);
+      }
+      return false;
     case LOWER:
       if (record->event.pressed) {
         layer_on(_LOWER);
@@ -100,7 +127,6 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) {
         update_tri_layer(_LOWER, _RAISE, _ADJUST);
       }
       return false;
-      break;
     case RAISE:
       if (record->event.pressed) {
         layer_on(_RAISE);
@@ -110,7 +136,6 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) {
         update_tri_layer(_LOWER, _RAISE, _ADJUST);
       }
       return false;
-      break;
   }
   return true;
 }

keyboards/keebio/iris/keymaps/osiris/readme.md

@@ -3,7 +3,9 @@
 ![My Iris Rev3](https://i.imgur.com/7oXacel.jpg)
 
 - mouse keys enabled
-- WASD as arrow keys, and same ones for media
+- includes a QWERTY and a WORKMAN layout now
 - keys that I need, while removing keys that I don't
+- more updates with the layout coming soon
+  - the enter needs to move elsewhere, not yet sure where
 
 See keymap.c for layouts

keyboards/keyhive/maypad/config.h

@@ -0,0 +1,246 @@
+/*
+Copyright 2019 codybender
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0xFEED
+#define PRODUCT_ID      0x6060
+#define DEVICE_VER      0x0001
+#define MANUFACTURER    KeyHive
+#define PRODUCT         maypad
+#define DESCRIPTION     Budget-friendly numpad
+
+/* key matrix size */
+#define MATRIX_ROWS 5
+#define MATRIX_COLS 4
+
+/*
+ * Keyboard Matrix Assignments
+ *
+ * Change this to how you wired your keyboard
+ * COLS: AVR pins used for columns, left to right
+ * ROWS: AVR pins used for rows, top to bottom
+ * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
+ *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
+ *
+*/
+#define MATRIX_ROW_PINS { C6, D7, E6, B4, B5 }
+#define MATRIX_COL_PINS { F6, F7, B1, B3 }
+#define UNUSED_PINS
+
+/* COL2ROW, ROW2COL*/
+#define DIODE_DIRECTION COL2ROW
+
+/*
+ * Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN.
+ */
+#define SOFT_SERIAL_PIN D0 // or D1, D2, D3, E6
+
+// #define BACKLIGHT_PIN B7
+// #define BACKLIGHT_BREATHING
+// #define BACKLIGHT_LEVELS 3
+
+// #define RGB_DI_PIN E2
+// #ifdef RGB_DI_PIN
+//   #define RGBLED_NUM 16
+//   #define RGBLIGHT_HUE_STEP 8
+//   #define RGBLIGHT_SAT_STEP 8
+//   #define RGBLIGHT_VAL_STEP 8
+//   #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
+//   #define RGBLIGHT_SLEEP  /* If defined, the RGB lighting will be switched off when the host goes to sleep */
+// /*== all animations enable ==*/
+//   #define RGBLIGHT_ANIMATIONS
+// /*== or choose animations ==*/
+//   #define RGBLIGHT_EFFECT_BREATHING
+//   #define RGBLIGHT_EFFECT_RAINBOW_MOOD
+//   #define RGBLIGHT_EFFECT_RAINBOW_SWIRL
+//   #define RGBLIGHT_EFFECT_SNAKE
+//   #define RGBLIGHT_EFFECT_KNIGHT
+//   #define RGBLIGHT_EFFECT_CHRISTMAS
+//   #define RGBLIGHT_EFFECT_STATIC_GRADIENT
+//   #define RGBLIGHT_EFFECT_RGB_TEST
+//   #define RGBLIGHT_EFFECT_ALTERNATING
+// /*== customize breathing effect ==*/
+//   /*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
+//   #define RGBLIGHT_BREATHE_TABLE_SIZE 256      // 256(default) or 128 or 64
+//   /*==== use exp() and sin() ====*/
+//   #define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85  // 1 to 2.7
+//   #define RGBLIGHT_EFFECT_BREATHE_MAX    255   // 0 to 255
+// #endif
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCE 5
+
+/* define if matrix has ghost (lacks anti-ghosting diodes) */
+//#define MATRIX_HAS_GHOST
+
+/* number of backlight levels */
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
+ * This is userful for the Windows task manager shortcut (ctrl+shift+esc).
+ */
+// #define GRAVE_ESC_CTRL_OVERRIDE
+
+/*
+ * Force NKRO
+ *
+ * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
+ * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
+ * makefile for this to work.)
+ *
+ * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
+ * until the next keyboard reset.
+ *
+ * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
+ * fully operational during normal computer usage.
+ *
+ * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
+ * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
+ * bootmagic, NKRO mode will always be enabled until it is toggled again during a
+ * power-up.
+ *
+ */
+//#define FORCE_NKRO
+
+/*
+ * Magic Key Options
+ *
+ * Magic keys are hotkey commands that allow control over firmware functions of
+ * the keyboard. They are best used in combination with the HID Listen program,
+ * found here: https://www.pjrc.com/teensy/hid_listen.html
+ *
+ * The options below allow the magic key functionality to be changed. This is
+ * useful if your keyboard/keypad is missing keys and you want magic key support.
+ *
+ */
+
+/* key combination for magic key command */
+/* defined by default; to change, uncomment and set to the combination you want */
+// #define IS_COMMAND() (get_mods() == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)))
+
+/* control how magic key switches layers */
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS  true
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS  true
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false
+
+/* override magic key keymap */
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM
+//#define MAGIC_KEY_HELP           H
+//#define MAGIC_KEY_HELP_ALT       SLASH
+//#define MAGIC_KEY_DEBUG          D
+//#define MAGIC_KEY_DEBUG_MATRIX   X
+//#define MAGIC_KEY_DEBUG_KBD      K
+//#define MAGIC_KEY_DEBUG_MOUSE    M
+//#define MAGIC_KEY_VERSION        V
+//#define MAGIC_KEY_STATUS         S
+//#define MAGIC_KEY_CONSOLE        C
+//#define MAGIC_KEY_LAYER0         0
+//#define MAGIC_KEY_LAYER0_ALT     GRAVE
+//#define MAGIC_KEY_LAYER1         1
+//#define MAGIC_KEY_LAYER2         2
+//#define MAGIC_KEY_LAYER3         3
+//#define MAGIC_KEY_LAYER4         4
+//#define MAGIC_KEY_LAYER5         5
+//#define MAGIC_KEY_LAYER6         6
+//#define MAGIC_KEY_LAYER7         7
+//#define MAGIC_KEY_LAYER8         8
+//#define MAGIC_KEY_LAYER9         9
+//#define MAGIC_KEY_BOOTLOADER     B
+//#define MAGIC_KEY_BOOTLOADER_ALT ESC
+//#define MAGIC_KEY_LOCK           CAPS
+//#define MAGIC_KEY_EEPROM         E
+//#define MAGIC_KEY_EEPROM_CLEAR   BSPACE
+//#define MAGIC_KEY_NKRO           N
+//#define MAGIC_KEY_SLEEP_LED      Z
+
+/*
+ * Feature disable options
+ *  These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+//#define NO_DEBUG
+
+/* disable print */
+//#define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+//#define NO_ACTION_MACRO
+//#define NO_ACTION_FUNCTION
+
+/*
+ * MIDI options
+ */
+
+/* Prevent use of disabled MIDI features in the keymap */
+//#define MIDI_ENABLE_STRICT 1
+
+/* enable basic MIDI features:
+   - MIDI notes can be sent when in Music mode is on
+*/
+//#define MIDI_BASIC
+
+/* enable advanced MIDI features:
+   - MIDI notes can be added to the keymap
+   - Octave shift and transpose
+   - Virtual sustain, portamento, and modulation wheel
+   - etc.
+*/
+//#define MIDI_ADVANCED
+
+/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
+//#define MIDI_TONE_KEYCODE_OCTAVES 1
+
+/*
+ * HD44780 LCD Display Configuration
+ */
+/*
+#define LCD_LINES           2     //< number of visible lines of the display
+#define LCD_DISP_LENGTH    16     //< visibles characters per line of the display
+#define LCD_IO_MODE      1            //< 0: memory mapped mode, 1: IO port mode
+#if LCD_IO_MODE
+#define LCD_PORT         PORTB        //< port for the LCD lines
+#define LCD_DATA0_PORT   LCD_PORT     //< port for 4bit data bit 0
+#define LCD_DATA1_PORT   LCD_PORT     //< port for 4bit data bit 1
+#define LCD_DATA2_PORT   LCD_PORT     //< port for 4bit data bit 2
+#define LCD_DATA3_PORT   LCD_PORT     //< port for 4bit data bit 3
+#define LCD_DATA0_PIN    4            //< pin for 4bit data bit 0
+#define LCD_DATA1_PIN    5            //< pin for 4bit data bit 1
+#define LCD_DATA2_PIN    6            //< pin for 4bit data bit 2
+#define LCD_DATA3_PIN    7            //< pin for 4bit data bit 3
+#define LCD_RS_PORT      LCD_PORT     //< port for RS line
+#define LCD_RS_PIN       3            //< pin  for RS line
+#define LCD_RW_PORT      LCD_PORT     //< port for RW line
+#define LCD_RW_PIN       2            //< pin  for RW line
+#define LCD_E_PORT       LCD_PORT     //< port for Enable line
+#define LCD_E_PIN        1            //< pin  for Enable line
+#endif
+*/
+
+/* Bootmagic Lite key configuration */
+// #define BOOTMAGIC_LITE_ROW 0
+// #define BOOTMAGIC_LITE_COLUMN 0

keyboards/keyhive/maypad/info.json

@@ -0,0 +1,16 @@
+{
+    "keyboard_name": "maypad", 
+    "url": "https://keyhive.xyz/shop/may-pad", 
+    "maintainer": "codybender", 
+    "width": 4, 
+    "height": 5, 
+    "layouts": {
+        "LAYOUT_numpad_5x4": {
+            "layout": [{"label":"Num Lock", "x":0, "y":0}, {"label":"/", "x":1, "y":0}, {"label":"*", "x":2, "y":0}, {"label":"-", "x":3, "y":0}, {"label":"7", "x":0, "y":1}, {"label":"8", "x":1, "y":1}, {"label":"9", "x":2, "y":1}, {"label":"4", "x":0, "y":2}, {"label":"5", "x":1, "y":2}, {"label":"6", "x":2, "y":2}, {"label":"+", "x":3, "y":1, "h":2}, {"label":"1", "x":0, "y":3}, {"label":"2", "x":1, "y":3}, {"label":"3", "x":2, "y":3}, {"label":"0", "x":0, "y":4, "w":2}, {"label":".", "x":2, "y":4}, {"label":"Enter", "x":3, "y":3, "h":2}]
+        },
+        "LAYOUT_ortho_5x4": {
+            "layout": [{"label":"Num Lock", "x":0, "y":0}, {"label":"/", "x":1, "y":0}, {"label":"*", "x":2, "y":0}, {"label":"-", "x":3, "y":0}, {"label":"7", "x":0, "y":1}, {"label":"8", "x":1, "y":1}, {"label":"9", "x":2, "y":1}, {"label":"+", "x":3, "y":1}, {"label":"4", "x":0, "y":2}, {"label":"5", "x":1, "y":2}, {"label":"6", "x":2, "y":2}, {"label":"+", "x":3, "y":2}, {"label":"1", "x":0, "y":3}, {"label":"2", "x":1, "y":3}, {"label":"3", "x":2, "y":3}, {"label":"Enter", "x":3, "y":3}, {"label":"0", "x":0, "y":4, "w":2}, {"label":".", "x":2, "y":4}, {"label":"Enter", "x":3, "y":4}]
+        }
+    
+    }
+}

keyboards/keyhive/maypad/keymaps/default/config.h

@@ -0,0 +1,19 @@
+/* Copyright 2019 codybender
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+// place overrides here

keyboards/keyhive/maypad/keymaps/default/keymap.c

@@ -0,0 +1,40 @@
+/* Copyright 2019 codybender
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+	LAYOUT_numpad_5x4(
+		KC_NLCK, KC_PSLS, KC_PAST, KC_PMNS, 
+    	KC_P7,            KC_P8,   KC_P9,            
+    	KC_P4,            KC_P5,   KC_P6,   KC_PPLS, 
+    	KC_P1,            KC_P2,   KC_P3,            
+    	         KC_P0,            KC_PDOT, KC_PENT  
+	),
+};
+
+
+void matrix_init_user(void) {
+
+}
+
+void matrix_scan_user(void) {
+
+}
+
+void led_set_user(uint8_t usb_led) {
+
+}

keyboards/keyhive/maypad/keymaps/default/readme.md

@@ -0,0 +1 @@
+# The default keymap for maypad

keyboards/keyhive/maypad/maypad.c

@@ -0,0 +1,51 @@
+/* Copyright 2019 codybender
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include "maypad.h"
+
+// Optional override functions below.
+// You can leave any or all of these undefined.
+// These are only required if you want to perform custom actions.
+
+/*
+
+void matrix_init_kb(void) {
+  // put your keyboard start-up code here
+  // runs once when the firmware starts up
+
+  matrix_init_user();
+}
+
+void matrix_scan_kb(void) {
+  // put your looping keyboard code here
+  // runs every cycle (a lot)
+
+  matrix_scan_user();
+}
+
+bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
+  // put your per-action keyboard code here
+  // runs for every action, just before processing by the firmware
+
+  return process_record_user(keycode, record);
+}
+
+void led_set_kb(uint8_t usb_led) {
+  // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
+
+  led_set_user(usb_led);
+}
+
+*/

keyboards/keyhive/maypad/maypad.h

@@ -0,0 +1,61 @@
+/* Copyright 2019 codybender
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#pragma once
+
+#include "quantum.h"
+
+/* maypad numpad layout
+ * .-------------------.
+ * |NLCK|   /|   *|   -|
+ * |-------------------|
+ * |   7|   8|   9|    |
+ * |--------------|    |
+ * |   4|   5|   6|   +|
+ * |-------------------|
+ * |   1|   2|   3|    |
+ * |--------------|    |
+ * |        0|   .| Ent|
+ * '-------------------'
+ */
+// The first section contains all of the arguments
+// The second converts the arguments into a two-dimensional array
+#define LAYOUT_numpad_5x4( \
+    k00, k01, k02, k03, \
+    k10, k11, k12,      \
+    k20, k21, k22, k23, \
+    k30, k31, k32,      \
+         k41, k42, k43 \
+) { \
+    { k00,   k01, k02, k03   },  \
+    { k10,   k11, k12, KC_NO },  \
+    { k20,   k21, k22, k23   },  \
+    { k30,   k31, k32, KC_NO },  \
+    { KC_NO, k41, k42, k43   }   \
+}
+
+#define LAYOUT_ortho_5x4( \
+    k00, k01, k02, k03, \
+    k10, k11, k12, k13, \
+    k20, k21, k22, k23, \
+    k30, k31, k32, k33, \
+    k40, k41, k42, k43  \
+) { \
+    { k00, k01, k02, k03 }, \
+    { k10, k11, k12, k13 }, \
+    { k20, k21, k22, k23 }, \
+    { k30, k31, k32, k33 }, \
+    { k40, k41, k42, k43 }  \
+}

keyboards/keyhive/maypad/readme.md

@@ -0,0 +1,13 @@
+# KeyHive Maypad
+
+![Maypad Layout](https://i.imgur.com/B7WXcfy.png)
+
+A budget-friendly, exposed-component numpad from [KeyHive](https://www.keyhive.xyz)
+
+Keyboard Maintainer: [Cody Bender](https://github.com/codybender)  
+
+Make example for this keyboard (after setting up your build environment):
+
+    make keyhive/maypad:default
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

keyboards/keyhive/maypad/rules.mk

@@ -0,0 +1,82 @@
+# MCU name
+MCU = atmega32u4
+
+# Processor frequency.
+#     This will define a symbol, F_CPU, in all source code files equal to the
+#     processor frequency in Hz. You can then use this symbol in your source code to
+#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+#     automatically to create a 32-bit value in your source code.
+#
+#     This will be an integer division of F_USB below, as it is sourced by
+#     F_USB after it has run through any CPU prescalers. Note that this value
+#     does not *change* the processor frequency - it should merely be updated to
+#     reflect the processor speed set externally so that the code can use accurate
+#     software delays.
+F_CPU = 16000000
+
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+#     This will define a symbol, F_USB, in all source code files equal to the
+#     input clock frequency (before any prescaling is performed) in Hz. This value may
+#     differ from F_CPU if prescaling is used on the latter, and is required as the
+#     raw input clock is fed directly to the PLL sections of the AVR for high speed
+#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+#     at the end, this will be done automatically to create a 32-bit value in your
+#     source code.
+#
+#     If no clock division is performed on the input clock inside the AVR (via the
+#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+
+# Bootloader selection
+#   Teensy       halfkay
+#   Pro Micro    caterina
+#   Atmel DFU    atmel-dfu
+#   LUFA DFU     lufa-dfu
+#   QMK DFU      qmk-dfu
+#   atmega32a    bootloadHID
+BOOTLOADER = atmel-dfu
+
+
+# If you don't know the bootloader type, then you can specify the
+# Boot Section Size in *bytes* by uncommenting out the OPT_DEFS line
+#   Teensy halfKay      512
+#   Teensy++ halfKay    1024
+#   Atmel DFU loader    4096
+#   LUFA bootloader     4096
+#   USBaspLoader        2048
+# OPT_DEFS += -DBOOTLOADER_SIZE=4096
+
+
+# Build Options
+#   change yes to no to disable
+#
+BOOTMAGIC_ENABLE = lite      # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
+CONSOLE_ENABLE = yes        # Console for debug(+400)
+COMMAND_ENABLE = yes        # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = no            # USB Nkey Rollover
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality on B7 by default
+RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
+MIDI_ENABLE = no            # MIDI support (+2400 to 4200, depending on config)
+UNICODE_ENABLE = no         # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+AUDIO_ENABLE = no           # Audio output on port C6
+FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
+HD44780_ENABLE = no 		# Enable support for HD44780 based LCDs (+400)
+
+LAYOUTS = ortho_5x4 numpad_5x4

keyboards/massdrop/ctrl/keymaps/matthewrobo/keymap.c

@@ -135,7 +135,7 @@ void rgb_matrix_indicators_user(void)
 			break;
 
 		case _FNC: {
-			HSV hsv = { rgb_matrix_config.hue, rgb_matrix_config.sat, rgb_matrix_config.val };
+			HSV hsv = { rgb_matrix_config.hsv.h, rgb_matrix_config.hsv.s, rgb_matrix_config.hsv.v };
 			HSV hui = hsv;
 			HSV hud = hsv;
 			HSV sai = hsv;

keyboards/mechllama/g35/info.json

@@ -11,4 +11,3 @@
         }
     }
 }
-rt

keyboards/melody96/keymaps/konstantin/keymap.c

@@ -1,7 +1,7 @@
 #include QMK_KEYBOARD_H
 #include "konstantin.h"
 
-static const hsv_t *colors[] = { &GODSPEED_BLUE, &GODSPEED_YELLOW };
+static const HSV *colors[] = { &GODSPEED_BLUE, &GODSPEED_YELLOW };
 static const size_t cnum = sizeof colors / sizeof *colors;
 static size_t cidx = 0;
 

keyboards/nek_type_a/info.json

@@ -0,0 +1,101 @@
+{
+    "keyboard_name": "NEK Type A",
+    "url": "",
+    "maintainer": "ecopoesis",
+    "width": 19.75,
+    "height": 6.25,
+    "layouts": {
+        "LAYOUT": {
+            "layout": [
+                {"label":"Esc", "x":0.5, "y":0, "w":1.75},
+                {"label":"F1", "x":2.75, "y":0},
+                {"label":"F2", "x":3.75, "y":0},
+                {"label":"F3", "x":4.75, "y":0},
+                {"label":"F4", "x":5.75, "y":0},
+                {"label":"F5", "x":8.25, "y":0},
+                {"label":"F6", "x":9.25, "y":0},
+                {"label":"F7", "x":10.25, "y":0},
+                {"label":"F8", "x":11.25, "y":0},
+                {"label":"F9", "x":12.5, "y":0},
+                {"label":"F10", "x":13.5, "y":0},
+                {"label":"F11", "x":14.5, "y":0},
+                {"label":"F12", "x":15.5, "y":0},
+                {"label":"Mute", "x":16.75, "y":0},
+                {"label":"Volume Down", "x":17.75, "y":0},
+                {"label":"Volume Up", "x":18.75, "y":0},
+                {"label":"`", "x":0, "y":1.25},
+                {"label":"1", "x":1, "y":1.25},
+                {"label":"2", "x":2, "y":1.25},
+                {"label":"3", "x":3, "y":1.25},
+                {"label":"4", "x":4, "y":1.25},
+                {"label":"5", "x":5, "y":1.25},
+                {"label":"6", "x":6, "y":1.25},
+                {"label":"7", "x":8, "y":1.25, "w":1.5},
+                {"label":"8", "x":9.5, "y":1.25},
+                {"label":"9", "x":10.5, "y":1.25},
+                {"label":"0", "x":11.5, "y":1.25},
+                {"label":"-", "x":12.5, "y":1.25},
+                {"label":"=", "x":13.5, "y":1.25},
+                {"label":"Backspace", "x":14.5, "y":1.25, "w":2},
+                {"label":"Insert", "x":16.75, "y":1.25},
+                {"label":"Home", "x":17.75, "y":1.25},
+                {"label":"Page Up", "x":18.75, "y":1.25},
+                {"label":"Tab", "x":0, "y":2.25, "w":1.5},
+                {"label":"Q", "x":1.5, "y":2.25},
+                {"label":"W", "x":2.5, "y":2.25},
+                {"label":"E", "x":3.5, "y":2.25},
+                {"label":"R", "x":4.5, "y":2.25},
+                {"label":"T", "x":5.5, "y":2.25, "w":1.5},
+                {"label":"Y", "x":8, "y":2.25},
+                {"label":"U", "x":9, "y":2.25},
+                {"label":"I", "x":10, "y":2.25},
+                {"label":"O", "x":11, "y":2.25},
+                {"label":"P", "x":12, "y":2.25},
+                {"label":"[", "x":13, "y":2.25},
+                {"label":"]", "x":14, "y":2.25},
+                {"label":"\\", "x":15, "y":2.25, "w":1.5},
+                {"label":"Delete", "x":16.75, "y":2.25},
+                {"label":"End", "x":17.75, "y":2.25},
+                {"label":"Page Down", "x":18.75, "y":2.25},
+                {"label":"Caps Lock", "x":0, "y":3.25, "w":1.75},
+                {"label":"A", "x":1.75, "y":3.25},
+                {"label":"S", "x":2.75, "y":3.25},
+                {"label":"D", "x":3.75, "y":3.25},
+                {"label":"F", "x":4.75, "y":3.25},
+                {"label":"G", "x":5.75, "y":3.25, "w":1.25},
+                {"label":"H", "x":8, "y":3.25, "w":1.25},
+                {"label":"J", "x":9.25, "y":3.25},
+                {"label":"K", "x":10.25, "y":3.25},
+                {"label":"L", "x":11.25, "y":3.25},
+                {"label":";", "x":12.25, "y":3.25},
+                {"label":"'", "x":13.25, "y":3.25},
+                {"label":"Enter", "x":14.25, "y":3.25, "w":2.25},
+                {"label":"Shift", "x":0, "y":4.25, "w":2},
+                {"label":"Z", "x":2, "y":4.25},
+                {"label":"X", "x":3, "y":4.25},
+                {"label":"C", "x":4, "y":4.25},
+                {"label":"V", "x":5, "y":4.25},
+                {"label":"B", "x":6, "y":4.25},
+                {"label":"N", "x":8, "y":4.25, "w":1.5},
+                {"label":"M", "x":9.5, "y":4.25},
+                {"label":",", "x":10.5, "y":4.25},
+                {"label":".", "x":11.5, "y":4.25},
+                {"label":"/", "x":12.5, "y":4.25},
+                {"label":"Shift", "x":13.5, "y":4.25, "w":2.75},
+                {"label":"Up", "x":17.75, "y":3.75},
+                {"label":"Ctrl", "x":0, "y":5.25, "w":1.5},
+                {"label":"Alt", "x":1.5, "y":5.25, "w":1.25},
+                {"label":"Cmd", "x":2.75, "y":5.25, "w":1.5},
+                {"label":"Space", "x":4.25, "y":5.25, "w":2.75},
+                {"label":"Space", "x":8, "y":5.25, "w":2.75},
+                {"label":"Cmd", "x":10.75, "y":5.25, "w":1.5},
+                {"label":"Alt", "x":12.25, "y":5.25, "w":1.25},
+                {"label":"Ctrl", "x":13.5, "y":5.25, "w":1.5},
+                {"label":"Menu", "x":15, "y":5.25, "w":1.25},
+                {"label":"Left", "x":16.75, "y":4.75},
+                {"label":"Down", "x":17.75, "y":4.75},
+                {"label":"Right", "x":18.75, "y":4.75}
+            ]
+        }
+    }
+}

keyboards/planck/keymaps/default/keymap.c

@@ -46,9 +46,9 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 /* Qwerty
  * ,-----------------------------------------------------------------------------------.
  * | Tab  |   Q  |   W  |   E  |   R  |   T  |   Y  |   U  |   I  |   O  |   P  | Bksp |
- * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
  * | Esc  |   A  |   S  |   D  |   F  |   G  |   H  |   J  |   K  |   L  |   ;  |  "   |
- * |------+------+------+------+------+------|------+------+------+------+------+------|
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
  * | Shift|   Z  |   X  |   C  |   V  |   B  |   N  |   M  |   ,  |   .  |   /  |Enter |
  * |------+------+------+------+------+------+------+------+------+------+------+------|
  * | Brite| Ctrl | Alt  | GUI  |Lower |    Space    |Raise | Left | Down |  Up  |Right |
@@ -64,9 +64,9 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 /* Colemak
  * ,-----------------------------------------------------------------------------------.
  * | Tab  |   Q  |   W  |   F  |   P  |   G  |   J  |   L  |   U  |   Y  |   ;  | Bksp |
- * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
  * | Esc  |   A  |   R  |   S  |   T  |   D  |   H  |   N  |   E  |   I  |   O  |  "   |
- * |------+------+------+------+------+------|------+------+------+------+------+------|
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
  * | Shift|   Z  |   X  |   C  |   V  |   B  |   K  |   M  |   ,  |   .  |   /  |Enter |
  * |------+------+------+------+------+------+------+------+------+------+------+------|
  * | Brite| Ctrl | Alt  | GUI  |Lower |    Space    |Raise | Left | Down |  Up  |Right |
@@ -82,9 +82,9 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 /* Dvorak
  * ,-----------------------------------------------------------------------------------.
  * | Tab  |   "  |   ,  |   .  |   P  |   Y  |   F  |   G  |   C  |   R  |   L  | Bksp |
- * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
  * | Esc  |   A  |   O  |   E  |   U  |   I  |   D  |   H  |   T  |   N  |   S  |  /   |
- * |------+------+------+------+------+------|------+------+------+------+------+------|
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
  * | Shift|   ;  |   Q  |   J  |   K  |   X  |   B  |   M  |   W  |   V  |   Z  |Enter |
  * |------+------+------+------+------+------+------+------+------+------+------+------|
  * | Brite| Ctrl | Alt  | GUI  |Lower |    Space    |Raise | Left | Down |  Up  |Right |
@@ -100,9 +100,9 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 /* Lower
  * ,-----------------------------------------------------------------------------------.
  * |   ~  |   !  |   @  |   #  |   $  |   %  |   ^  |   &  |   *  |   (  |   )  | Bksp |
- * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
  * | Del  |  F1  |  F2  |  F3  |  F4  |  F5  |  F6  |   _  |   +  |   {  |   }  |  |   |
- * |------+------+------+------+------+------|------+------+------+------+------+------|
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
  * |      |  F7  |  F8  |  F9  |  F10 |  F11 |  F12 |ISO ~ |ISO | | Home | End  |      |
  * |------+------+------+------+------+------+------+------+------+------+------+------|
  * |      |      |      |      |      |             |      | Next | Vol- | Vol+ | Play |
@@ -118,9 +118,9 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 /* Raise
  * ,-----------------------------------------------------------------------------------.
  * |   `  |   1  |   2  |   3  |   4  |   5  |   6  |   7  |   8  |   9  |   0  | Bksp |
- * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
  * | Del  |  F1  |  F2  |  F3  |  F4  |  F5  |  F6  |   -  |   =  |   [  |   ]  |  \   |
- * |------+------+------+------+------+------|------+------+------+------+------+------|
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
  * |      |  F7  |  F8  |  F9  |  F10 |  F11 |  F12 |ISO # |ISO / |Pg Up |Pg Dn |      |
  * |------+------+------+------+------+------+------+------+------+------+------+------|
  * |      |      |      |      |      |             |      | Next | Vol- | Vol+ | Play |
@@ -136,9 +136,9 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 /* Plover layer (http://opensteno.org)
  * ,-----------------------------------------------------------------------------------.
  * |   #  |   #  |   #  |   #  |   #  |   #  |   #  |   #  |   #  |   #  |   #  |   #  |
- * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
  * |      |   S  |   T  |   P  |   H  |   *  |   *  |   F  |   P  |   L  |   T  |   D  |
- * |------+------+------+------+------+------|------+------+------+------+------+------|
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
  * |      |   S  |   K  |   W  |   R  |   *  |   *  |   R  |   B  |   G  |   S  |   Z  |
  * |------+------+------+------+------+------+------+------+------+------+------+------|
  * | Exit |      |      |   A  |   O  |             |   E  |   U  |      |      |      |
@@ -154,9 +154,9 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 /* Adjust (Lower + Raise)
  * ,-----------------------------------------------------------------------------------.
  * |      | Reset|      |      |      |      |      |      |      |      |      |  Del |
- * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
  * |      |      |      |Aud on|Audoff|AGnorm|AGswap|Qwerty|Colemk|Dvorak|Plover|      |
- * |------+------+------+------+------+------|------+------+------+------+------+------|
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
  * |      |Voice-|Voice+|Mus on|Musoff|MIDIon|MIDIof|      |      |      |      |      |
  * |------+------+------+------+------+------+------+------+------+------+------+------|
  * |      |      |      |      |      |             |      |      |      |      |      |

keyboards/planck/keymaps/yttyx/config.h

@@ -0,0 +1,5 @@
+#pragma once
+#define NO_ACTION_ONESHOT
+#define NO_ACTION_MACRO
+#define NO_ACTION_FUNCTION
+#define TAPPING_TOGGLE  2

keyboards/planck/keymaps/yttyx/keymap.c

@@ -0,0 +1,146 @@
+
+#include QMK_KEYBOARD_H
+#include <keymap_steno.h>
+
+enum planck_layers {
+  _BA,        // Base (Balance Twelve mirror variant)
+  _PL,        // Plover (http://opensteno.org)
+  _NP,        // Numeric/punctuation
+  _FC         // Function/cursor
+};
+
+enum planck_keycodes {
+  BA  = SAFE_RANGE,
+  PL
+};
+
+
+// Abbreviations
+#define KX_SFT_Z   MT(MOD_LSFT, KC_Z)
+#define KX_SFT_X   MT(MOD_RSFT, KC_X)
+#define LT_ESC_FC  LT(_FC, KC_ESC)
+
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+  /* BA
+    .--------.--------.--------.--------.--------.--------.--------.--------.--------.--------.--------.--------.
+    | P      | L      | C      | D      | W      |        |        | U      | O      | Y      | K      | Q      |
+    |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------|
+    | N      | R      | S      | T      | M      |        | BS     | A      | E      | I      | H      | V      |
+    |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------|
+    | Z Sft  | J      | F      | G      | B      |        | Ent    | ' @    | , <    | . >    | X Sft  |        |
+    |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------|
+    | Ctl    | Alt    | Sup    | NP     | Spc    | Esc/FC | Sft    | Sft    | Sup    | Alt    | Ctl    |        |
+    '--------'--------'--------'--------'--------'--------'--------'--------'--------'--------'--------'--------'
+  */                                                                                                            
+  [_BA] = LAYOUT_planck_grid( 
+    KC_P,     KC_L,    KC_C,    KC_D,    KC_W,   XXXXXXX,   XXXXXXX, KC_U,    KC_O,    KC_Y,    KC_K,     KC_Q,
+    KC_N,     KC_R,    KC_S,    KC_T,    KC_M,   XXXXXXX,   KC_BSPC, KC_A,    KC_E,    KC_I,    KC_H,     KC_V,
+    KX_SFT_Z, KC_J,    KC_F,    KC_G,    KC_B,   XXXXXXX,   KC_ENT,  KC_QUOT, KC_COMM, KC_DOT,  KX_SFT_X, XXXXXXX,
+    KC_LCTL,  KC_LALT, KC_LGUI, MO(_NP), KC_SPC, LT_ESC_FC, KC_LSFT, KC_LSFT, KC_LGUI, KC_LALT, KC_LCTL,  XXXXXXX
+  ),
+
+  /* Plover
+    .--------.--------.--------.--------.--------.--------.--------.--------.--------.--------.--------.--------.
+    | #      | #      | #      | #      | #      | BA     | #      | #      | #      | #      | #      | #      |
+    |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------|
+    | S      | T      | P      | H      | *      |        | *      | F      | P      | L      | T      | D      |
+    |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------|
+    | S      | K      | W      | R      | *      |        | *      | R      | B      | G      | S      | Z      |
+    |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------|
+    |        |        |        | A      | O      |        | E      | U      |        |        |        |        |
+    '--------'--------'--------'--------'--------'--------'--------'--------'--------'--------'--------'--------'
+  */
+  [_PL] = LAYOUT_planck_grid(
+    STN_NUM, STN_NUM, STN_NUM, STN_NUM, STN_NUM, BA,      STN_NUM, STN_NUM, STN_NUM, STN_NUM, STN_NUM, STN_NUM,
+    STN_S1,  STN_TL,  STN_PL,  STN_HL,  STN_ST1, XXXXXXX, STN_ST1, STN_FR,  STN_PR,  STN_LR,  STN_TR,  STN_DR,
+    STN_S2,  STN_KL,  STN_WL,  STN_RL,  STN_ST2, XXXXXXX, STN_ST2, STN_RR,  STN_BR,  STN_GR,  STN_SR,  STN_ZR,
+    XXXXXXX, XXXXXXX, XXXXXXX, STN_A,   STN_O,   XXXXXXX, STN_E,   STN_U,   XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX
+  ),
+
+  /* Numeric/punctuation
+    .--------.--------.--------.--------.--------.--------.--------.--------.--------.--------.--------.--------.
+    | 1 !    | 2 "    | 3 <20>    | 4 $    | 5 %    | PL     |        | 6 ^    | 7 &    | 8 *    | 9 (    | 0 )    |
+    |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------|
+    | Tab    | Ctl-X  | Ctl-C  | Ctl-V  | Ctl-Z  |        | BS     | [ {    | ] }    | - _    | ; :    | \ |    |
+    |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------|
+    | Sft    |        |        | Del    | Ins    |        |        | / ?    | = +    | # ~    | `      |        |
+    |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------|
+    | Ctl    | Alt    | Sup    | NP     | Spc    |        | Sft    | Sft    | Sup    | Alt    | Ctl    |        |
+    '--------'--------'--------'--------'--------'--------'--------'--------'--------'--------'--------'--------'
+  */                                           
+  [_NP] = LAYOUT_planck_grid(
+    KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    PL,      XXXXXXX, KC_6,    KC_7,    KC_8,    KC_9,    KC_0,
+    KC_TAB,  C(KC_X), C(KC_C), C(KC_V), C(KC_Z), XXXXXXX, _______, KC_LBRC, KC_RBRC, KC_MINS, KC_SCLN, KC_NUBS,
+    KC_LSFT, XXXXXXX, XXXXXXX, KC_DEL,  KC_INS,  XXXXXXX, XXXXXXX, KC_SLSH, KC_EQL,  KC_NUHS, KC_GRV,  XXXXXXX, 
+    _______, _______, _______, _______, _______, XXXXXXX, _______, _______, _______, _______, _______, XXXXXXX
+  ),
+
+  /* Function/cursor
+    .--------.--------.--------.--------.--------.--------.--------.--------.--------.--------.--------.--------.
+    | F1     | F2     | F3     | F4     | F5     |        |        | Home   | Up     | End    | PgUp   |        |
+    |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------|
+    | F6     | F7     | F8     | F9     | F10    |        |        | Left   | Down   | Right  | PgDn   |        |
+    |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------|
+    | Sft    |        |        | F11    | F12    |        |        | PScr   | Break  | ScLk   | Caps   |        |
+    |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------|
+    | Ctl    | Alt    | Sup    |        | Spc    |        | Sft    | Sft    | Sup    | Alt    | Ctl    |        |
+    '--------'--------'--------'--------'--------'--------'--------'--------'--------'--------'--------'--------'
+  */                                                                                                            
+  [_FC] = LAYOUT_planck_grid(
+    KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   XXXXXXX, XXXXXXX, KC_HOME, KC_UP,   KC_END,  KC_PGUP, XXXXXXX,
+    KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  XXXXXXX, XXXXXXX, KC_LEFT, KC_DOWN, KC_RGHT, KC_PGDN, XXXXXXX,
+    _______, XXXXXXX, XXXXXXX, KC_F11,  KC_F12,  XXXXXXX, XXXXXXX, KC_PSCR, KC_BRK,  KC_SLCK, KC_CAPS, XXXXXXX,
+    _______, _______, _______, XXXXXXX, _______, _______, _______, _______, _______, _______, _______, XXXXXXX
+  )
+
+};
+
+
+#ifdef AUDIO_ENABLE
+  float plover_on[][2]   = SONG(PLOVER_SOUND);
+  float plover_off[][2]  = SONG(PLOVER_GOODBYE_SOUND);
+#endif
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+  switch (keycode) {
+    case PL:
+      if (record->event.pressed) {
+        #ifdef AUDIO_ENABLE
+          stop_all_notes();
+          PLAY_SONG(plover_on);
+        #endif
+        
+        layer_off(_NP);
+        layer_off(_FC);
+        layer_on(_PL);
+
+        if (!eeconfig_is_enabled()) {
+            eeconfig_init();
+        }
+        
+        keymap_config.raw = eeconfig_read_keymap();
+        keymap_config.nkro = 1;
+        eeconfig_update_keymap(keymap_config.raw);
+      }
+      return false;
+    case BA:
+      if (record->event.pressed) {
+        #ifdef AUDIO_ENABLE
+          PLAY_SONG(plover_off);
+        #endif
+       
+        layer_off(_NP);
+        layer_off(_PL);
+        layer_off(_FC);
+      }
+      return false;
+    }
+    return true;
+}
+
+void matrix_init_user() {
+  steno_set_mode(STENO_MODE_GEMINI);
+}
+

keyboards/planck/keymaps/yttyx/readme.md

@@ -0,0 +1,68 @@
+# Overview
+
+* Base layer uses the Balance Twelve layout ([reference](https://mathematicalmulticore.wordpress.com/the-keyboard-layout-project/))
+* Plover layer uses the same home position as the base layer ([reference](http://www.openstenoproject.org/))
+
+## To build
+
+```
+make planck/rev6:yttyx
+```
+
+## To build and flash
+
+```
+make planck/rev6:yttyx:dfu-util
+```
+
+## Layers
+
+### Base
+
+    .--------.--------.--------.--------.--------.--------.--------.--------.--------.--------.--------.--------.
+    | P      | L      | C      | D      | W      |        |        | U      | O      | Y      | K      | Q      |
+    |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------|
+    | N      | R      | S      | T      | M      |        | BS     | A      | E      | I      | H      | V      |
+    |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------|
+    | Z Sft  | J      | F      | G      | B      |        | Ent    | ' @    | , <    | . >    | X Sft  |        |
+    |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------|
+    | Ctl    | Alt    | Sup    | NP     | Spc    | Esc/FC | Sft    | Sft    | Sup    | Alt    | Ctl    |        |
+    '--------'--------'--------'--------'--------'--------'--------'--------'--------'--------'--------'--------'
+
+### Plover
+
+    .--------.--------.--------.--------.--------.--------.--------.--------.--------.--------.--------.--------.
+    | #      | #      | #      | #      | #      | BA     | #      | #      | #      | #      | #      | #      |
+    |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------|
+    | S      | T      | P      | H      | *      |        | *      | F      | P      | L      | T      | D      |
+    |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------|
+    | S      | K      | W      | R      | *      |        | *      | R      | B      | G      | S      | Z      |
+    |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------|
+    |        |        |        | A      | O      |        | E      | U      |        |        |        |        |
+    '--------'--------'--------'--------'--------'--------'--------'--------'--------'--------'--------'--------'
+
+### Numeric/Punctuation
+
+    .--------.--------.--------.--------.--------.--------.--------.--------.--------.--------.--------.--------.
+    | 1 !    | 2 "    | 3 £    | 4 $    | 5 %    | PL     |        | 6 ^    | 7 &    | 8 *    | 9 (    | 0 )    |
+    |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------|
+    | Tab    | Ctl-X  | Ctl-C  | Ctl-V  | Ctl-Z  |        | BS     | [ {    | ] }    | - _    | ; :    | \ |    |
+    |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------|
+    | Sft    |        |        | Del    | Ins    |        |        | / ?    | = +    | # ~    | `      |        |
+    |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------|
+    | Ctl    | Alt    | Sup    | NP     | Spc    |        | Sft    | Sft    | Sup    | Alt    | Ctl    |        |
+    '--------'--------'--------'--------'--------'--------'--------'--------'--------'--------'--------'--------'
+
+### Function
+
+    .--------.--------.--------.--------.--------.--------.--------.--------.--------.--------.--------.--------.
+    | F1     | F2     | F3     | F4     | F5     |        |        | Home   | Up     | End    | PgUp   |        |
+    |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------|
+    | F6     | F7     | F8     | F9     | F10    |        |        | Left   | Down   | Right  | PgDn   |        |
+    |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------|
+    | Sft    |        |        | F11    | F12    |        |        | PScr   | Break  | ScLk   | Caps   |        |
+    |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------|
+    | Ctl    | Alt    | Sup    |        | Spc    |        | Sft    | Sft    | Sup    | Alt    | Ctl    |        |
+    '--------'--------'--------'--------'--------'--------'--------'--------'--------'--------'--------'--------'
+
+

keyboards/planck/keymaps/yttyx/rules.mk

@@ -0,0 +1,11 @@
+# Build Options
+AUDIO_ENABLE = yes
+CONSOLE_ENABLE = no
+EXTRAKEY_ENABLE = no
+MIDI_ENABLE = no
+MOUSEKEY_ENABLE = no
+NKRO_ENABLE = yes
+RGBLIGHT_ENABLE = no
+STENO_ENABLE = yes
+VIRTSER_ENABLE = yes
+

keyboards/runner3680/3x6/config.h

@@ -26,8 +26,8 @@
 
 /* key matrix size */
 // Rows are doubled-up
-#define MATRIX_ROWS 10
-#define MATRIX_COLS 8
+#define MATRIX_ROWS 6
+#define MATRIX_COLS 6
 
 // wiring of each half
 #define MATRIX_ROW_PINS { D4, C6, D7 }
@@ -51,9 +51,10 @@
 /* ws2812 RGB LED */
 #define RGB_DI_PIN D3
 #define RGBLIGHT_ANIMATIONS
-#define RGBLED_NUM 70
+#define RGBLED_NUM 36
 #define RGBLIGHT_SPLIT
-#define RGBLED_SPLIT { 35, 35 }    // Number of LEDs
+#define RGBLED_SPLIT { 18, 18 }    // Number of LEDs
+#define RGBLIGHT_LIMIT_VAL 100
 
 #define SOFT_SERIAL_PIN D2
 #define SELECT_SOFT_SERIAL_SPEED 1

keyboards/runner3680/3x7/config.h

@@ -26,8 +26,8 @@
 
 /* key matrix size */
 // Rows are doubled-up
-#define MATRIX_ROWS 10
-#define MATRIX_COLS 8
+#define MATRIX_ROWS 6
+#define MATRIX_COLS 7
 
 // wiring of each half
 #define MATRIX_ROW_PINS { D4, C6, D7 }
@@ -51,9 +51,10 @@
 /* ws2812 RGB LED */
 #define RGB_DI_PIN D3
 #define RGBLIGHT_ANIMATIONS
-#define RGBLED_NUM 70
+#define RGBLED_NUM 42
 #define RGBLIGHT_SPLIT
-#define RGBLED_SPLIT { 35, 35 }    // Number of LEDs
+#define RGBLED_SPLIT { 21, 21 }    // Number of LEDs
+#define RGBLIGHT_LIMIT_VAL 100
 
 #define SOFT_SERIAL_PIN D2
 #define SELECT_SOFT_SERIAL_SPEED 1

keyboards/runner3680/3x8/config.h

@@ -26,7 +26,7 @@
 
 /* key matrix size */
 // Rows are doubled-up
-#define MATRIX_ROWS 10
+#define MATRIX_ROWS 6
 #define MATRIX_COLS 8
 
 // wiring of each half
@@ -51,9 +51,10 @@
 /* ws2812 RGB LED */
 #define RGB_DI_PIN D3
 #define RGBLIGHT_ANIMATIONS
-#define RGBLED_NUM 80
+#define RGBLED_NUM 48
 #define RGBLIGHT_SPLIT
-#define RGBLED_SPLIT { 40, 40 }    // Number of LEDs
+#define RGBLED_SPLIT { 24, 24 }    // Number of LEDs
+#define RGBLIGHT_LIMIT_VAL 100
 
 #define SOFT_SERIAL_PIN D2
 #define SELECT_SOFT_SERIAL_SPEED 1

keyboards/runner3680/4x6/config.h

@@ -26,8 +26,8 @@
 
 /* key matrix size */
 // Rows are doubled-up
-#define MATRIX_ROWS 10
-#define MATRIX_COLS 8
+#define MATRIX_ROWS 8
+#define MATRIX_COLS 6
 
 // wiring of each half
 #define MATRIX_ROW_PINS { D4, C6, D7, E6 }
@@ -51,9 +51,10 @@
 /* ws2812 RGB LED */
 #define RGB_DI_PIN D3
 #define RGBLIGHT_ANIMATIONS
-#define RGBLED_NUM 70
+#define RGBLED_NUM 48
 #define RGBLIGHT_SPLIT
-#define RGBLED_SPLIT { 35, 35 }    // Number of LEDs
+#define RGBLED_SPLIT { 24, 24 }    // Number of LEDs
+#define RGBLIGHT_LIMIT_VAL 100
 
 #define SOFT_SERIAL_PIN D2
 #define SELECT_SOFT_SERIAL_SPEED 1

keyboards/runner3680/4x7/config.h

@@ -26,8 +26,8 @@
 
 /* key matrix size */
 // Rows are doubled-up
-#define MATRIX_ROWS 10
-#define MATRIX_COLS 8
+#define MATRIX_ROWS 8
+#define MATRIX_COLS 7
 
 // wiring of each half
 #define MATRIX_ROW_PINS { D4, C6, D7, E6 }
@@ -51,9 +51,10 @@
 /* ws2812 RGB LED */
 #define RGB_DI_PIN D3
 #define RGBLIGHT_ANIMATIONS
-#define RGBLED_NUM 70
+#define RGBLED_NUM 56
 #define RGBLIGHT_SPLIT
-#define RGBLED_SPLIT { 35, 35 }    // Number of LEDs
+#define RGBLED_SPLIT { 28, 28 }    // Number of LEDs
+#define RGBLIGHT_LIMIT_VAL 100
 
 #define SOFT_SERIAL_PIN D2
 #define SELECT_SOFT_SERIAL_SPEED 1

keyboards/runner3680/4x8/config.h

@@ -26,7 +26,7 @@
 
 /* key matrix size */
 // Rows are doubled-up
-#define MATRIX_ROWS 10
+#define MATRIX_ROWS 8
 #define MATRIX_COLS 8
 
 // wiring of each half
@@ -51,9 +51,10 @@
 /* ws2812 RGB LED */
 #define RGB_DI_PIN D3
 #define RGBLIGHT_ANIMATIONS
-#define RGBLED_NUM 80
+#define RGBLED_NUM 64
 #define RGBLIGHT_SPLIT
-#define RGBLED_SPLIT { 40, 40 }    // Number of LEDs
+#define RGBLED_SPLIT { 32, 32 }    // Number of LEDs
+#define RGBLIGHT_LIMIT_VAL 100
 
 #define SOFT_SERIAL_PIN D2
 #define SELECT_SOFT_SERIAL_SPEED 1

keyboards/runner3680/5x6/config.h

@@ -27,7 +27,7 @@
 /* key matrix size */
 // Rows are doubled-up
 #define MATRIX_ROWS 10
-#define MATRIX_COLS 8
+#define MATRIX_COLS 6
 
 // wiring of each half
 #define MATRIX_ROW_PINS { D4, C6, D7, E6, B4 }
@@ -51,9 +51,10 @@
 /* ws2812 RGB LED */
 #define RGB_DI_PIN D3
 #define RGBLIGHT_ANIMATIONS
-#define RGBLED_NUM 70
+#define RGBLED_NUM 60
 #define RGBLIGHT_SPLIT
-#define RGBLED_SPLIT { 35, 35 }    // Number of LEDs
+#define RGBLED_SPLIT { 30, 30 }    // Number of LEDs
+#define RGBLIGHT_LIMIT_VAL 100
 
 #define SOFT_SERIAL_PIN D2
 #define SELECT_SOFT_SERIAL_SPEED 1

keyboards/runner3680/5x7/config.h

@@ -27,7 +27,7 @@
 /* key matrix size */
 // Rows are doubled-up
 #define MATRIX_ROWS 10
-#define MATRIX_COLS 8
+#define MATRIX_COLS 7
 
 // wiring of each half
 #define MATRIX_ROW_PINS { D4, C6, D7, E6, B4 }
@@ -54,6 +54,7 @@
 #define RGBLED_NUM 70
 #define RGBLIGHT_SPLIT
 #define RGBLED_SPLIT { 35, 35 }    // Number of LEDs
+#define RGBLIGHT_LIMIT_VAL 100
 
 #define SOFT_SERIAL_PIN D2
 #define SELECT_SOFT_SERIAL_SPEED 1

keyboards/runner3680/5x8/config.h

@@ -54,6 +54,7 @@
 #define RGBLED_NUM 80
 #define RGBLIGHT_SPLIT
 #define RGBLED_SPLIT { 40, 40 }    // Number of LEDs
+#define RGBLIGHT_LIMIT_VAL 100
 
 #define SOFT_SERIAL_PIN D2
 #define SELECT_SOFT_SERIAL_SPEED 1

keyboards/runner3680/rules.mk

@@ -38,10 +38,10 @@ BOOTLOADER = caterina
 #   change yes to no to disable
 #
 BOOTMAGIC_ENABLE = no      # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
-EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
-CONSOLE_ENABLE = yes        # Console for debug(+400)
-COMMAND_ENABLE = yes        # Commands for debug and configuration
+MOUSEKEY_ENABLE = no       # Mouse keys(+4700)
+EXTRAKEY_ENABLE = no       # Audio control and System control(+450)
+CONSOLE_ENABLE = no        # Console for debug(+400)
+COMMAND_ENABLE = no        # Commands for debug and configuration
 # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
 SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
 # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work

keyboards/whitefox/keymaps/konstantin/config.h

@@ -1,6 +1,4 @@
 #pragma once
 
-#define IS_COMMAND() (get_mods() == (MOD_BIT(KC_LSFT) | MOD_BIT(KC_RCTL)))
-
 #define LAYER_FN
 #define LAYER_NUMPAD

keyboards/winkeyless/bface/keymaps/p3lim/README.md

@@ -0,0 +1,14 @@
+# p3lim's b.face layout
+
+![](https://user-images.githubusercontent.com/26496/61170794-bf8a2c80-a56e-11e9-893f-f1766e7a9a04.png)
+
+My layout using the winkeyless b.face X2 PCB. The keys indicated with a gray color was not supported by the layout so a custom one was made.
+
+### Building & Flashing
+
+- Hold <kbd>LCTRL</kbd> while connecting to put in flashing mode
+- Follow instructions in the main _bface_ directory
+
+### Layout notes
+
+The two additional keys were on pins 22+41 and 22+42, C3+B1 and C3+B2, which is mapped to col 10 row 1 and col 10 row 2 in the matrix.

keyboards/winkeyless/bface/keymaps/p3lim/keymap.c

@@ -0,0 +1,156 @@
+/*
+Copyright 2019 Adrian L Lange <legal@p3lim.net>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include QMK_KEYBOARD_H
+#include "quantum.h"
+
+#define LAYOUT_p3lim(\
+  K04, K14, K24, K34, K44, K54, K16, KB6, KB7, K17, KA4, KB4, KC4, KE4, \
+  K03, K13, K23, K33, K43, K53, K26, KC6, KC7, K27, KA3, KB3, KC3, \
+  K02, K12, K22, K32, K42, K52, K36, KD6, KD7, K37, KA2, KB2, KC2, KD2, \
+  K01, K11, K21, K31, K41, K51, K46, KE6, KE7, K47, KA1, KB1, KC1, \
+  K00, K10, K20,           K56,                K57, KB0, KC0  \
+){ \
+  { K00,   K10,   K20,   KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KB0,   KC0,   KC_NO, KC_NO }, \
+  { K01,   K11,   K21,   K31,   K41,   K51,   KC_NO, KC_NO, KC_NO, KC_NO, KA1,   KB1,   KC1,   KC_NO, KC_NO }, \
+  { K02,   K12,   K22,   K32,   K42,   K52,   KC_NO, KC_NO, KC_NO, KC_NO, KA2,   KB2,   KC2,   KD2,   KC_NO }, \
+  { K03,   K13,   K23,   K33,   K43,   K53,   KC_NO, KC_NO, KC_NO, KC_NO, KA3,   KB3,   KC3,   KC_NO, KC_NO }, \
+  { K04,   K14,   K24,   K34,   K44,   K54,   KC_NO, KC_NO, KC_NO, KC_NO, KA4,   KB4,   KC4,   KC_NO, KE4   }, \
+  { KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO }, \
+  { KC_NO, K16,   K26,   K36,   K46,   K56,   KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KB6,   KC6,   KD6,   KE6   }, \
+  { KC_NO, K17,   K27,   K37,   K47,   K57,   KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KB7,   KC7,   KD7,   KE7   } \
+}
+
+enum my_keycodes {
+	C_ESC0 = SAFE_RANGE, // layer 0 esc
+	C_ESC1               // layer 1 esc
+};
+
+// use compiler macros for simpler stuff
+#define C_NO1 RALT(KC_QUOT)
+#define C_NO2 RALT(KC_SCLN)
+#define C_NO3 RALT(KC_LBRC)
+#define C_KVM1 LCA(KC_1)
+#define C_KVM2 LCA(KC_2)
+#define C_KVM3 LCA(KC_3)
+#define C_KVM4 LCA(KC_4)
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+	/* QWERTY
+	* ,-----------------------------------------------------------------------------------------.
+	* | Esc |  1  |  2  |  3  |  4  |  5  |  6  |  7  |  8  |  9  |  0  |  -  |  =  |   Bkspc   |
+	* |-----------------------------------------------------------------------------------------+
+	* |   Tab  |  Q  |  W  |  E  |  R  |  T  |  Y  |  U  |  I  |  O  |  P  |  [  |  ]  |        |
+	* |---------------------------------------------------------------------------------| Enter |
+	* |   Ctrl  |  A  |  S  |  D  |  F  |  G  |  H  |  J  |  K  |  L  |  ;  |  '  |  \  |       |
+	* |-----------------------------------------------------------------------------------------+
+	* |   Shift   |  Z  |  X  |  C  |  V  |  B  |  N  |  M  |  ,  |  .  |  /  |   Shift   | Del |
+	* |-----------------------------------------------------------------------------------------+
+	* |  FN1  | Alt |  GUI   |              Space                      |  FN2   | Alt |  Ctrl   |
+	* `-----------------------------------------------------------------------------------------'
+	*/
+	[0] = LAYOUT_p3lim(
+		C_ESC0,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_BSPC,
+		KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC,
+		KC_LCTL, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT, KC_BSLS, KC_ENT,
+		KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_RSFT, KC_DEL,
+		MO(1),   KC_LALT, KC_LGUI,                   KC_SPC,                             MO(2),   KC_RGUI, KC_RCTL
+	),
+
+	/* FN1
+	* ,-----------------------------------------------------------------------------------------.
+	* |  `  | F1  | F2  | F3  | F4  | F5  | F6  | F7  | F8  | F9  | F10 | F11 | F12 |           |
+	* |-----------------------------------------------------------------------------------------+
+	* |  Caps  | Home| Up  | End | PgUp|     |     |     |     |     |     |     |     |        |
+	* |---------------------------------------------------------------------------------|       |
+	* |         | Left| Down|Right| PgDn|     |     |     |     |     |     |     |     |       |
+	* |-----------------------------------------------------------------------------------------+
+	* |           | KVM1| KVM2| KVM3| KVM4|     |     |     |     |     |     |           |     |
+	* |-----------------------------------------------------------------------------------------+
+	* |       |     |        |                                         |        |     |         |
+	* `-----------------------------------------------------------------------------------------'
+	*/
+	[1] = LAYOUT_p3lim(
+		C_ESC1,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  _______,
+		KC_CAPS, KC_HOME, KC_UP,   KC_END,  KC_PGUP, _______, _______, _______, _______, _______, _______, _______, _______,
+		_______, KC_LEFT, KC_DOWN, KC_RGHT, KC_PGDN, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+		_______, C_KVM1,  C_KVM2,  C_KVM3,  C_KVM4,  _______, _______, _______, _______, _______, _______, _______, _______,
+		_______, _______, _______,                   _______,                            KC_NO,   _______, _______
+	),
+
+	/* FN2
+	* ,-----------------------------------------------------------------------------------------.
+	* |     |     |     |     |     |     |     |     |     |     |     |     |     |           |
+	* |-----------------------------------------------------------------------------------------+
+	* |        |     |     |     |     |     |     |     |     |     |     |  Å  |     |        |
+	* |---------------------------------------------------------------------------------|       |
+	* |         |     |     |     |     |     |     |     |     |     |  Ø  |  Æ  |     |       |
+	* |-----------------------------------------------------------------------------------------+
+	* |           |     |     |     |     |     |     |     |     |     |     |           |     |
+	* |-----------------------------------------------------------------------------------------+
+	* |       |     |        |                                         |        |     |         |
+	* `-----------------------------------------------------------------------------------------'
+	*/
+	[2] = LAYOUT_p3lim(
+		_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+		_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, C_NO3,   _______,
+		_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, C_NO2,   C_NO1,   _______, _______,
+		_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+		KC_NO,   _______, _______,                   _______,                            _______, _______, _______
+	),
+	/*
+	[n] = LAYOUT_p3lim(
+		_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+		_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+		_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+		_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+		_______, _______, _______,                   _______,                            _______, _______, _______
+	),
+	*/
+};
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record){
+	switch(keycode){
+		case C_ESC0: // layer 0
+			if(record->event.pressed){
+				if(get_mods() & MOD_MASK_SHIFT)
+					register_code(KC_GRAVE);
+				else
+					register_code(KC_ESCAPE);
+			} else {
+				if(get_mods() & MOD_MASK_SHIFT)
+					unregister_code(KC_GRAVE);
+				else
+					unregister_code(KC_ESCAPE);
+			}
+			return false;
+		case C_ESC1: // layer 1
+			if(record->event.pressed){
+				if(get_mods() & MOD_MASK_SHIFT)
+					register_code(KC_ESCAPE);
+				else
+					register_code(KC_GRAVE);
+			} else {
+				if(get_mods() & MOD_MASK_SHIFT)
+					unregister_code(KC_ESCAPE);
+				else
+					unregister_code(KC_GRAVE);
+			}
+			return false;
+	}
+	return true;
+}

keyboards/xd96/info.json

@@ -7,11 +7,231 @@
   "layouts": {  
     "LAYOUT_96_ansi": {
       "key_count": 99,
-      "layout": [{"label":"Esc", "x":0, "y":0}, {"label":"F1", "x":1, "y":0}, {"label":"F2", "x":2, "y":0}, {"label":"F3", "x":3, "y":0}, {"label":"F4", "x":4, "y":0}, {"label":"F5", "x":5, "y":0}, {"label":"F6", "x":6, "y":0}, {"label":"F7", "x":7, "y":0}, {"label":"F8", "x":8, "y":0}, {"label":"F9", "x":9, "y":0}, {"label":"F10", "x":10, "y":0}, {"label":"F11", "x":11, "y":0}, {"label":"F12", "x":12, "y":0}, {"label":"Insert", "x":13, "y":0}, {"label":"Delete", "x":14, "y":0}, {"label":"Home", "x":15, "y":0}, {"label":"End", "x":16, "y":0}, {"label":"PgUp", "x":17, "y":0}, {"label":"PgDn", "x":18, "y":0}, {"label":"~", "x":0, "y":1}, {"label":"!", "x":1, "y":1}, {"label":"@", "x":2, "y":1}, {"label":"#", "x":3, "y":1}, {"label":"$", "x":4, "y":1}, {"label":"%", "x":5, "y":1}, {"label":"^", "x":6, "y":1}, {"label":"&", "x":7, "y":1}, {"label":"*", "x":8, "y":1}, {"label":"(", "x":9, "y":1}, {"label":")", "x":10, "y":1}, {"label":"_", "x":11, "y":1}, {"label":"+", "x":12, "y":1}, {"label":"Backspace", "x":13, "y":1, "w":2}, {"label":"Num Lock", "x":15, "y":1}, {"label":"/", "x":16, "y":1}, {"label":"*", "x":17, "y":1}, {"label":"-", "x":18, "y":1}, {"label":"Tab", "x":0, "y":2, "w":1.5}, {"label":"Q", "x":1.5, "y":2}, {"label":"W", "x":2.5, "y":2}, {"label":"E", "x":3.5, "y":2}, {"label":"R", "x":4.5, "y":2}, {"label":"T", "x":5.5, "y":2}, {"label":"Y", "x":6.5, "y":2}, {"label":"U", "x":7.5, "y":2}, {"label":"I", "x":8.5, "y":2}, {"label":"O", "x":9.5, "y":2}, {"label":"P", "x":10.5, "y":2}, {"label":"{", "x":11.5, "y":2}, {"label":"}", "x":12.5, "y":2}, {"label":"|", "x":13.5, "y":2, "w":1.5}, {"label":"7", "x":15, "y":2}, {"label":"8", "x":16, "y":2}, {"label":"9", "x":17, "y":2}, {"label":"+", "x":18, "y":2, "h":2}, {"label":"Caps Lock", "x":0, "y":3, "w":1.75}, {"label":"A", "x":1.75, "y":3}, {"label":"S", "x":2.75, "y":3}, {"label":"D", "x":3.75, "y":3}, {"label":"F", "x":4.75, "y":3}, {"label":"G", "x":5.75, "y":3}, {"label":"H", "x":6.75, "y":3}, {"label":"J", "x":7.75, "y":3}, {"label":"K", "x":8.75, "y":3}, {"label":"L", "x":9.75, "y":3}, {"label":":", "x":10.75, "y":3}, {"label":"\"", "x":11.75, "y":3}, {"label":"Enter", "x":12.75, "y":3, "w":2.25}, {"label":"4", "x":15, "y":3}, {"label":"5", "x":16, "y":3}, {"label":"6", "x":17, "y":3}, {"label":"Shift", "x":0, "y":4, "w":2.25}, {"label":"Z", "x":2.25, "y":4}, {"label":"X", "x":3.25, "y":4}, {"label":"C", "x":4.25, "y":4}, {"label":"V", "x":5.25, "y":4}, {"label":"B", "x":6.25, "y":4}, {"label":"N", "x":7.25, "y":4}, {"label":"M", "x":8.25, "y":4}, {"label":"<", "x":9.25, "y":4}, {"label":">", "x":10.25, "y":4}, {"label":"?", "x":11.25, "y":4}, {"label":"Shift", "x":12.25, "y":4, "w":1.75}, {"label":"\u2191", "x":14, "y":4}, {"label":"1", "x":15, "y":4}, {"label":"2", "x":16, "y":4}, {"label":"3", "x":17, "y":4}, {"label":"Enter", "x":18, "y":4, "h":2}, {"label":"Ctrl", "x":0, "y":5, "w":1.25}, {"label":"Win", "x":1.25, "y":5, "w":1.25}, {"label":"Alt", "x":2.5, "y":5, "w":1.25}, {"x":3.75, "y":5, "w":6.25}, {"label":"Alt", "x":10, "y":5, "w":1.5}, {"label":"Ctrl", "x":11.5, "y":5, "w":1.5}, {"label":"\u2190", "x":13, "y":5}, {"label":"\u2193", "x":14, "y":5}, {"label":"\u2192", "x":15, "y":5}, {"label":"0", "x":16, "y":5}, {"label":".", "x":17, "y":5}]
+      "layout": [
+        {"label":"Esc", "x":0, "y":0},
+        {"label":"F1", "x":1, "y":0},
+        {"label":"F2", "x":2, "y":0},
+        {"label":"F3", "x":3, "y":0},
+        {"label":"F4", "x":4, "y":0},
+        {"label":"F5", "x":5, "y":0},
+        {"label":"F6", "x":6, "y":0},
+        {"label":"F7", "x":7, "y":0},
+        {"label":"F8", "x":8, "y":0},
+        {"label":"F9", "x":9, "y":0},
+        {"label":"F10", "x":10, "y":0},
+        {"label":"F11", "x":11, "y":0},
+        {"label":"F12", "x":12, "y":0},
+        {"label":"Insert", "x":13, "y":0},
+        {"label":"Delete", "x":14, "y":0},
+        {"label":"Home", "x":15, "y":0},
+        {"label":"End", "x":16, "y":0},
+        {"label":"PgUp", "x":17, "y":0},
+        {"label":"PgDn", "x":18, "y":0},
+
+        {"label":"~", "x":0, "y":1},
+        {"label":"!", "x":1, "y":1},
+        {"label":"@", "x":2, "y":1},
+        {"label":"#", "x":3, "y":1},
+        {"label":"$", "x":4, "y":1},
+        {"label":"%", "x":5, "y":1},
+        {"label":"^", "x":6, "y":1},
+        {"label":"&", "x":7, "y":1},
+        {"label":"*", "x":8, "y":1},
+        {"label":"(", "x":9, "y":1},
+        {"label":")", "x":10, "y":1},
+        {"label":"_", "x":11, "y":1},
+        {"label":"+", "x":12, "y":1},
+        {"label":"Backspace", "x":13, "y":1, "w":2},
+
+        {"label":"Num Lock", "x":15, "y":1},
+        {"label":"/", "x":16, "y":1},
+        {"label":"*", "x":17, "y":1},
+        {"label":"-", "x":18, "y":1},
+
+        {"label":"Tab", "x":0, "y":2, "w":1.5},
+        {"label":"Q", "x":1.5, "y":2},
+        {"label":"W", "x":2.5, "y":2},
+        {"label":"E", "x":3.5, "y":2},
+        {"label":"R", "x":4.5, "y":2},
+        {"label":"T", "x":5.5, "y":2},
+        {"label":"Y", "x":6.5, "y":2},
+        {"label":"U", "x":7.5, "y":2},
+        {"label":"I", "x":8.5, "y":2},
+        {"label":"O", "x":9.5, "y":2},
+        {"label":"P", "x":10.5, "y":2},
+        {"label":"{", "x":11.5, "y":2},
+        {"label":"}", "x":12.5, "y":2},
+        {"label":"|", "x":13.5, "y":2, "w":1.5},
+        {"label":"7", "x":15, "y":2},
+        {"label":"8", "x":16, "y":2},
+        {"label":"9", "x":17, "y":2},
+
+        {"label":"Caps Lock", "x":0, "y":3, "w":1.75},
+        {"label":"A", "x":1.75, "y":3},
+        {"label":"S", "x":2.75, "y":3},
+        {"label":"D", "x":3.75, "y":3},
+        {"label":"F", "x":4.75, "y":3},
+        {"label":"G", "x":5.75, "y":3},
+        {"label":"H", "x":6.75, "y":3},
+        {"label":"J", "x":7.75, "y":3},
+        {"label":"K", "x":8.75, "y":3},
+        {"label":"L", "x":9.75, "y":3},
+        {"label":":", "x":10.75, "y":3},
+        {"label":"\"", "x":11.75, "y":3},
+        {"label":"Enter", "x":12.75, "y":3, "w":2.25},
+
+        {"label":"4", "x":15, "y":3},
+        {"label":"5", "x":16, "y":3},
+        {"label":"6", "x":17, "y":3},
+        {"label":"+", "x":18, "y":2, "h":2},
+
+        {"label":"Shift", "x":0, "y":4, "w":2.25},
+        {"label":"Z", "x":2.25, "y":4},
+        {"label":"X", "x":3.25, "y":4},
+        {"label":"C", "x":4.25, "y":4},
+        {"label":"V", "x":5.25, "y":4},
+        {"label":"B", "x":6.25, "y":4},
+        {"label":"N", "x":7.25, "y":4},
+        {"label":"M", "x":8.25, "y":4},
+        {"label":"<", "x":9.25, "y":4},
+        {"label":">", "x":10.25, "y":4},
+        {"label":"?", "x":11.25, "y":4},
+        {"label":"Shift", "x":12.25, "y":4, "w":1.75},
+        {"label":"\u2191", "x":14, "y":4},
+
+        {"label":"1", "x":15, "y":4},
+        {"label":"2", "x":16, "y":4},
+        {"label":"3", "x":17, "y":4},
+
+        {"label":"Ctrl", "x":0, "y":5, "w":1.25},
+        {"label":"Win", "x":1.25, "y":5, "w":1.25},
+        {"label":"Alt", "x":2.5, "y":5, "w":1.25},
+        {"x":3.75, "y":5, "w":6.25},
+        {"label":"Alt", "x":10, "y":5, "w":1.5},
+        {"label":"Ctrl", "x":11.5, "y":5, "w":1.5},
+        {"label":"\u2190", "x":13, "y":5},
+        {"label":"\u2193", "x":14, "y":5},
+        {"label":"\u2192", "x":15, "y":5},
+
+        {"label":"0", "x":16, "y":5},
+        {"label":".", "x":17, "y":5},
+        {"label":"Enter", "x":18, "y":4, "h":2}
+      ]
     },
     "LAYOUT_96_iso": {
       "key_count": 100,
-      "layout": [{"label":"Esc", "x":0, "y":0}, {"label":"F1", "x":1, "y":0}, {"label":"F2", "x":2, "y":0}, {"label":"F3", "x":3, "y":0}, {"label":"F4", "x":4, "y":0}, {"label":"F5", "x":5, "y":0}, {"label":"F6", "x":6, "y":0}, {"label":"F7", "x":7, "y":0}, {"label":"F8", "x":8, "y":0}, {"label":"F9", "x":9, "y":0}, {"label":"F10", "x":10, "y":0}, {"label":"F11", "x":11, "y":0}, {"label":"F12", "x":12, "y":0}, {"label":"Insert", "x":13, "y":0}, {"label":"Delete", "x":14, "y":0}, {"label":"Home", "x":15, "y":0}, {"label":"End", "x":16, "y":0}, {"label":"PgUp", "x":17, "y":0}, {"label":"PgDn", "x":18, "y":0}, {"label":"~", "x":0, "y":1}, {"label":"!", "x":1, "y":1}, {"label":"\"", "x":2, "y":1}, {"label":"\u00a3", "x":3, "y":1}, {"label":"$", "x":4, "y":1}, {"label":"%", "x":5, "y":1}, {"label":"^", "x":6, "y":1}, {"label":"&", "x":7, "y":1}, {"label":"*", "x":8, "y":1}, {"label":"(", "x":9, "y":1}, {"label":")", "x":10, "y":1}, {"label":"_", "x":11, "y":1}, {"label":"+", "x":12, "y":1}, {"label":"Backspace", "x":13, "y":1, "w":2}, {"label":"Num Lock", "x":15, "y":1}, {"label":"/", "x":16, "y":1}, {"label":"*", "x":17, "y":1}, {"label":"-", "x":18, "y":1}, {"label":"Tab", "x":0, "y":2, "w":1.5}, {"label":"Q", "x":1.5, "y":2}, {"label":"W", "x":2.5, "y":2}, {"label":"E", "x":3.5, "y":2}, {"label":"R", "x":4.5, "y":2}, {"label":"T", "x":5.5, "y":2}, {"label":"Y", "x":6.5, "y":2}, {"label":"U", "x":7.5, "y":2}, {"label":"I", "x":8.5, "y":2}, {"label":"O", "x":9.5, "y":2}, {"label":"P", "x":10.5, "y":2}, {"label":"{", "x":11.5, "y":2}, {"label":"}", "x":12.5, "y":2}, {"label":"7", "x":15, "y":2}, {"label":"8", "x":16, "y":2}, {"label":"9", "x":17, "y":2}, {"label":"+", "x":18, "y":2, "h":2}, {"label":"Caps Lock", "x":0, "y":3, "w":1.75}, {"label":"A", "x":1.75, "y":3}, {"label":"S", "x":2.75, "y":3}, {"label":"D", "x":3.75, "y":3}, {"label":"F", "x":4.75, "y":3}, {"label":"G", "x":5.75, "y":3}, {"label":"H", "x":6.75, "y":3}, {"label":"J", "x":7.75, "y":3}, {"label":"K", "x":8.75, "y":3}, {"label":"L", "x":9.75, "y":3}, {"label":":", "x":10.75, "y":3}, {"label":"@", "x":11.75, "y":3}, {"label":"~", "x":12.75, "y":3}, {"label":"Enter", "x":13.75, "y":2, "w":1.25, "h":2}, {"label":"4", "x":15, "y":3}, {"label":"5", "x":16, "y":3}, {"label":"6", "x":17, "y":3}, {"label":"Shift", "x":0, "y":4, "w":1.25}, {"label":"|", "x":1.25, "y":4}, {"label":"Z", "x":2.25, "y":4}, {"label":"X", "x":3.25, "y":4}, {"label":"C", "x":4.25, "y":4}, {"label":"V", "x":5.25, "y":4}, {"label":"B", "x":6.25, "y":4}, {"label":"N", "x":7.25, "y":4}, {"label":"M", "x":8.25, "y":4}, {"label":"<", "x":9.25, "y":4}, {"label":">", "x":10.25, "y":4}, {"label":"?", "x":11.25, "y":4}, {"label":"Shift", "x":12.25, "y":4, "w":1.75}, {"label":"\u2191", "x":14, "y":4}, {"label":"1", "x":15, "y":4}, {"label":"2", "x":16, "y":4}, {"label":"3", "x":17, "y":4}, {"label":"Enter", "x":18, "y":4, "h":2}, {"label":"Ctrl", "x":0, "y":5, "w":1.25}, {"label":"Win", "x":1.25, "y":5, "w":1.25}, {"label":"Alt", "x":2.5, "y":5, "w":1.25}, {"x":3.75, "y":5, "w":6.25}, {"label":"Alt", "x":10, "y":5, "w":1.5}, {"label":"Ctrl", "x":11.5, "y":5, "w":1.5}, {"label":"\u2190", "x":13, "y":5}, {"label":"\u2193", "x":14, "y":5}, {"label":"\u2192", "x":15, "y":5}, {"label":"0", "x":16, "y":5}, {"label":".", "x":17, "y":5}]
+      "layout": [
+        {"label":"Esc", "x":0, "y":0},
+        {"label":"F1", "x":1, "y":0},
+        {"label":"F2", "x":2, "y":0},
+        {"label":"F3", "x":3, "y":0},
+        {"label":"F4", "x":4, "y":0},
+        {"label":"F5", "x":5, "y":0},
+        {"label":"F6", "x":6, "y":0},
+        {"label":"F7", "x":7, "y":0},
+        {"label":"F8", "x":8, "y":0},
+        {"label":"F9", "x":9, "y":0},
+        {"label":"F10", "x":10, "y":0},
+        {"label":"F11", "x":11, "y":0},
+        {"label":"F12", "x":12, "y":0},
+        {"label":"Insert", "x":13, "y":0},
+        {"label":"Delete", "x":14, "y":0},
+        {"label":"Home", "x":15, "y":0},
+        {"label":"End", "x":16, "y":0},
+        {"label":"PgUp", "x":17, "y":0},
+        {"label":"PgDn", "x":18, "y":0},
+
+        {"label":"~", "x":0, "y":1},
+        {"label":"!", "x":1, "y":1},
+        {"label":"\"", "x":2, "y":1},
+        {"label":"\u00a3", "x":3, "y":1},
+        {"label":"$", "x":4, "y":1},
+        {"label":"%", "x":5, "y":1},
+        {"label":"^", "x":6, "y":1},
+        {"label":"&", "x":7, "y":1},
+        {"label":"*", "x":8, "y":1},
+        {"label":"(", "x":9, "y":1},
+        {"label":")", "x":10, "y":1},
+        {"label":"_", "x":11, "y":1},
+        {"label":"+", "x":12, "y":1},
+        {"label":"Backspace", "x":13, "y":1, "w":2},
+
+        {"label":"Num Lock", "x":15, "y":1},
+        {"label":"/", "x":16, "y":1},
+        {"label":"*", "x":17, "y":1},
+        {"label":"-", "x":18, "y":1},
+
+        {"label":"Tab", "x":0, "y":2, "w":1.5},
+        {"label":"Q", "x":1.5, "y":2},
+        {"label":"W", "x":2.5, "y":2},
+        {"label":"E", "x":3.5, "y":2},
+        {"label":"R", "x":4.5, "y":2},
+        {"label":"T", "x":5.5, "y":2},
+        {"label":"Y", "x":6.5, "y":2},
+        {"label":"U", "x":7.5, "y":2},
+        {"label":"I", "x":8.5, "y":2},
+        {"label":"O", "x":9.5, "y":2},
+        {"label":"P", "x":10.5, "y":2},
+        {"label":"{", "x":11.5, "y":2},
+        {"label":"}", "x":12.5, "y":2},
+
+        {"label":"7", "x":15, "y":2},
+        {"label":"8", "x":16, "y":2},
+        {"label":"9", "x":17, "y":2},
+
+        {"label":"Caps Lock", "x":0, "y":3, "w":1.75},
+        {"label":"A", "x":1.75, "y":3},
+        {"label":"S", "x":2.75, "y":3},
+        {"label":"D", "x":3.75, "y":3},
+        {"label":"F", "x":4.75, "y":3},
+        {"label":"G", "x":5.75, "y":3},
+        {"label":"H", "x":6.75, "y":3},
+        {"label":"J", "x":7.75, "y":3},
+        {"label":"K", "x":8.75, "y":3},
+        {"label":"L", "x":9.75, "y":3},
+        {"label":":", "x":10.75, "y":3},
+        {"label":"@", "x":11.75, "y":3},
+        {"label":"~", "x":12.75, "y":3},
+        {"label":"Enter", "x":13.75, "y":2, "w":1.25, "h":2},
+
+        {"label":"4", "x":15, "y":3},
+        {"label":"5", "x":16, "y":3},
+        {"label":"6", "x":17, "y":3},
+        {"label":"+", "x":18, "y":2, "h":2},
+
+        {"label":"Shift", "x":0, "y":4, "w":1.25},
+        {"label":"|", "x":1.25, "y":4},
+        {"label":"Z", "x":2.25, "y":4},
+        {"label":"X", "x":3.25, "y":4},
+        {"label":"C", "x":4.25, "y":4},
+        {"label":"V", "x":5.25, "y":4},
+        {"label":"B", "x":6.25, "y":4},
+        {"label":"N", "x":7.25, "y":4},
+        {"label":"M", "x":8.25, "y":4},
+        {"label":"<", "x":9.25, "y":4},
+        {"label":">", "x":10.25, "y":4},
+        {"label":"?", "x":11.25, "y":4},
+        {"label":"Shift", "x":12.25, "y":4, "w":1.75},
+        {"label":"\u2191", "x":14, "y":4},
+
+        {"label":"1", "x":15, "y":4},
+        {"label":"2", "x":16, "y":4},
+        {"label":"3", "x":17, "y":4},
+
+        {"label":"Ctrl", "x":0, "y":5, "w":1.25},
+        {"label":"Win", "x":1.25, "y":5, "w":1.25},
+        {"label":"Alt", "x":2.5, "y":5, "w":1.25},
+        {"x":3.75, "y":5, "w":6.25},
+        {"label":"Alt", "x":10, "y":5, "w":1.5},
+        {"label":"Ctrl", "x":11.5, "y":5, "w":1.5},
+        {"label":"\u2190", "x":13, "y":5},
+        {"label":"\u2193", "x":14, "y":5},
+        {"label":"\u2192", "x":15, "y":5},
+
+        {"label":"0", "x":16, "y":5},
+        {"label":".", "x":17, "y":5},
+        {"label":"Enter", "x":18, "y":4, "h":2}
+      ]
     }
   }
 }

message.mk

@@ -79,8 +79,8 @@ MSG_TEST = Testing $(BOLD)$(TEST_NAME)$(NO_COLOR)
 MSG_CHECK_FILESIZE = Checking file size of $(TARGET).hex
 MSG_FILE_TOO_BIG = $(ERROR_COLOR)The firmware is too large!$(NO_COLOR) $(CURRENT_SIZE)/$(MAX_SIZE) ($(OVER_SIZE) bytes over)\n
 MSG_FILE_TOO_SMALL = The firmware is too small! $(CURRENT_SIZE)/$(MAX_SIZE)\n
-MSG_FILE_JUST_RIGHT = The firmware size is fine - $(CURRENT_SIZE)/$(MAX_SIZE) ($(FREE_SIZE) bytes free)\n
-MSG_FILE_NEAR_LIMIT = The firmware size is approaching the maximum - $(CURRENT_SIZE)/$(MAX_SIZE) ($(FREE_SIZE) bytes free)\n
+MSG_FILE_JUST_RIGHT = The firmware size is fine - $(CURRENT_SIZE)/$(MAX_SIZE) ($(PERCENT_SIZE)%%, $(FREE_SIZE) bytes free)\n
+MSG_FILE_NEAR_LIMIT = The firmware size is approaching the maximum - $(CURRENT_SIZE)/$(MAX_SIZE) ($(PERCENT_SIZE)%%, $(FREE_SIZE) bytes free)\n
 MSG_PYTHON_MISSING = $(WARN_COLOR)WARNING:$(NO_COLOR)\n \
 	Python 3 is not installed. It will be required by a future version\n\
 	of qmk_firmware.\n\n\

quantum/rgb_matrix.c

@@ -128,9 +128,7 @@ void eeconfig_update_rgb_matrix_default(void) {
   dprintf("eeconfig_update_rgb_matrix_default\n");
   rgb_matrix_config.enable = 1;
   rgb_matrix_config.mode = RGB_MATRIX_STARTUP_MODE;
-  rgb_matrix_config.hue = 0;
-  rgb_matrix_config.sat = UINT8_MAX;
-  rgb_matrix_config.val = RGB_MATRIX_MAXIMUM_BRIGHTNESS;
+  rgb_matrix_config.hsv = (HSV){ 0,  UINT8_MAX, RGB_MATRIX_MAXIMUM_BRIGHTNESS };
   rgb_matrix_config.speed = UINT8_MAX / 2;
   eeconfig_update_rgb_matrix(rgb_matrix_config.raw);
 }
@@ -139,9 +137,9 @@ void eeconfig_debug_rgb_matrix(void) {
   dprintf("rgb_matrix_config eprom\n");
   dprintf("rgb_matrix_config.enable = %d\n", rgb_matrix_config.enable);
   dprintf("rgb_matrix_config.mode = %d\n", rgb_matrix_config.mode);
-  dprintf("rgb_matrix_config.hue = %d\n", rgb_matrix_config.hue);
-  dprintf("rgb_matrix_config.sat = %d\n", rgb_matrix_config.sat);
-  dprintf("rgb_matrix_config.val = %d\n", rgb_matrix_config.val);
+  dprintf("rgb_matrix_config.hsv.h = %d\n", rgb_matrix_config.hsv.h);
+  dprintf("rgb_matrix_config.hsv.s = %d\n", rgb_matrix_config.hsv.s);
+  dprintf("rgb_matrix_config.hsv.v = %d\n", rgb_matrix_config.hsv.v);
   dprintf("rgb_matrix_config.speed = %d\n", rgb_matrix_config.speed);
 }
 
@@ -492,34 +490,34 @@ void rgb_matrix_step_reverse(void) {
 }
 
 void rgb_matrix_increase_hue(void) {
-  rgb_matrix_config.hue += RGB_MATRIX_HUE_STEP;
+  rgb_matrix_config.hsv.h += RGB_MATRIX_HUE_STEP;
   eeconfig_update_rgb_matrix(rgb_matrix_config.raw);
 }
 
 void rgb_matrix_decrease_hue(void) {
-  rgb_matrix_config.hue -= RGB_MATRIX_HUE_STEP;
+  rgb_matrix_config.hsv.h -= RGB_MATRIX_HUE_STEP;
   eeconfig_update_rgb_matrix(rgb_matrix_config.raw);
 }
 
 void rgb_matrix_increase_sat(void) {
-  rgb_matrix_config.sat = qadd8(rgb_matrix_config.sat, RGB_MATRIX_SAT_STEP);
+  rgb_matrix_config.hsv.s = qadd8(rgb_matrix_config.hsv.s, RGB_MATRIX_SAT_STEP);
   eeconfig_update_rgb_matrix(rgb_matrix_config.raw);
 }
 
 void rgb_matrix_decrease_sat(void) {
-  rgb_matrix_config.sat = qsub8(rgb_matrix_config.sat, RGB_MATRIX_SAT_STEP);
+  rgb_matrix_config.hsv.s = qsub8(rgb_matrix_config.hsv.s, RGB_MATRIX_SAT_STEP);
   eeconfig_update_rgb_matrix(rgb_matrix_config.raw);
 }
 
 void rgb_matrix_increase_val(void) {
-  rgb_matrix_config.val = qadd8(rgb_matrix_config.val, RGB_MATRIX_VAL_STEP);
-  if (rgb_matrix_config.val > RGB_MATRIX_MAXIMUM_BRIGHTNESS)
-    rgb_matrix_config.val = RGB_MATRIX_MAXIMUM_BRIGHTNESS;
+  rgb_matrix_config.hsv.v = qadd8(rgb_matrix_config.hsv.v, RGB_MATRIX_VAL_STEP);
+  if (rgb_matrix_config.hsv.v > RGB_MATRIX_MAXIMUM_BRIGHTNESS)
+    rgb_matrix_config.hsv.v = RGB_MATRIX_MAXIMUM_BRIGHTNESS;
   eeconfig_update_rgb_matrix(rgb_matrix_config.raw);
 }
 
 void rgb_matrix_decrease_val(void) {
-  rgb_matrix_config.val = qsub8(rgb_matrix_config.val, RGB_MATRIX_VAL_STEP);
+  rgb_matrix_config.hsv.v = qsub8(rgb_matrix_config.hsv.v, RGB_MATRIX_VAL_STEP);
   eeconfig_update_rgb_matrix(rgb_matrix_config.raw);
 }
 
@@ -561,9 +559,9 @@ void rgb_matrix_sethsv(uint16_t hue, uint8_t sat, uint8_t val) {
 }
 
 void rgb_matrix_sethsv_noeeprom(uint16_t hue, uint8_t sat, uint8_t val) {
-  rgb_matrix_config.hue = hue;
-  rgb_matrix_config.sat = sat;
-  rgb_matrix_config.val = val;
-  if (rgb_matrix_config.val > RGB_MATRIX_MAXIMUM_BRIGHTNESS)
-    rgb_matrix_config.val = RGB_MATRIX_MAXIMUM_BRIGHTNESS;
+  rgb_matrix_config.hsv.h = hue;
+  rgb_matrix_config.hsv.s = sat;
+  rgb_matrix_config.hsv.v = val;
+  if (rgb_matrix_config.hsv.v > RGB_MATRIX_MAXIMUM_BRIGHTNESS)
+    rgb_matrix_config.hsv.v = RGB_MATRIX_MAXIMUM_BRIGHTNESS;
 }

quantum/rgb_matrix_animations/alpha_mods_anim.h

@@ -6,7 +6,7 @@ RGB_MATRIX_EFFECT(ALPHAS_MODS)
 bool ALPHAS_MODS(effect_params_t* params) {
   RGB_MATRIX_USE_LIMITS(led_min, led_max);
 
-  HSV hsv = { rgb_matrix_config.hue, rgb_matrix_config.sat, rgb_matrix_config.val };
+  HSV hsv = rgb_matrix_config.hsv;
   RGB rgb1 = hsv_to_rgb(hsv);
   hsv.h += rgb_matrix_config.speed;
   RGB rgb2 = hsv_to_rgb(hsv);

quantum/rgb_matrix_animations/breathing_anim.h

@@ -5,9 +5,9 @@ RGB_MATRIX_EFFECT(BREATHING)
 bool BREATHING(effect_params_t* params) {
   RGB_MATRIX_USE_LIMITS(led_min, led_max);
 
+  HSV hsv = rgb_matrix_config.hsv;
   uint16_t time = scale16by8(g_rgb_counters.tick, rgb_matrix_config.speed / 8);
-  uint8_t val = scale8(abs8(sin8(time) - 128) * 2, rgb_matrix_config.val);
-  HSV hsv = { rgb_matrix_config.hue, rgb_matrix_config.sat, val };
+  hsv.v = scale8(abs8(sin8(time) - 128) * 2, hsv.v);
   RGB rgb = hsv_to_rgb(hsv);
   for (uint8_t i = led_min; i < led_max; i++) {
     RGB_MATRIX_TEST_LED_FLAGS();

quantum/rgb_matrix_animations/colorband_pinwheel_sat_anim.h

@@ -2,8 +2,9 @@
 RGB_MATRIX_EFFECT(BAND_PINWHEEL_SAT)
 #ifdef RGB_MATRIX_CUSTOM_EFFECT_IMPLS
 
-static void BAND_PINWHEEL_SAT_math(HSV* hsv, int16_t dx, int16_t dy, uint8_t time) {
-    hsv->s = rgb_matrix_config.sat - time - atan2_8(dy, dx) * 3;
+static HSV BAND_PINWHEEL_SAT_math(HSV hsv, int16_t dx, int16_t dy, uint8_t time) {
+    hsv.s = scale8(hsv.s - time - atan2_8(dy, dx) * 3, hsv.s);
+    return hsv;
 }
 
 bool BAND_PINWHEEL_SAT(effect_params_t* params) {

quantum/rgb_matrix_animations/colorband_pinwheel_val_anim.h

@@ -2,8 +2,9 @@
 RGB_MATRIX_EFFECT(BAND_PINWHEEL_VAL)
 #ifdef RGB_MATRIX_CUSTOM_EFFECT_IMPLS
 
-static void BAND_PINWHEEL_VAL_math(HSV* hsv, int16_t dx, int16_t dy, uint8_t time) {
-    hsv->v = rgb_matrix_config.val - time - atan2_8(dy, dx) * 3;
+static HSV BAND_PINWHEEL_VAL_math(HSV hsv, int16_t dx, int16_t dy, uint8_t time) {
+    hsv.v = scale8(hsv.v - time - atan2_8(dy, dx) * 3, hsv.v);
+    return hsv;
 }
 
 bool BAND_PINWHEEL_VAL(effect_params_t* params) {

quantum/rgb_matrix_animations/colorband_sat_anim.h

@@ -2,9 +2,10 @@
 RGB_MATRIX_EFFECT(BAND_SAT)
 #ifdef RGB_MATRIX_CUSTOM_EFFECT_IMPLS
 
-static void BAND_SAT_math(HSV* hsv, uint8_t i, uint8_t time) {
-    int16_t s = rgb_matrix_config.sat - abs(scale8(g_led_config.point[i].x, 228) + 28 - time) * 8;
-    hsv->s = s < 0 ? 0 : s;
+static HSV BAND_SAT_math(HSV hsv, uint8_t i, uint8_t time) {
+    int16_t s = hsv.s - abs(scale8(g_led_config.point[i].x, 228) + 28 - time) * 8;
+    hsv.s = scale8(s < 0 ? 0 : s, hsv.s);
+    return hsv;
 }
 
 bool BAND_SAT(effect_params_t* params) {

quantum/rgb_matrix_animations/colorband_spiral_sat_anim.h

@@ -2,8 +2,9 @@
 RGB_MATRIX_EFFECT(BAND_SPIRAL_SAT)
 #ifdef RGB_MATRIX_CUSTOM_EFFECT_IMPLS
 
-static void BAND_SPIRAL_SAT_math(HSV* hsv, int16_t dx, int16_t dy, uint8_t dist, uint8_t time) {
-    hsv->s = rgb_matrix_config.sat + dist - time - atan2_8(dy, dx);
+static HSV BAND_SPIRAL_SAT_math(HSV hsv, int16_t dx, int16_t dy, uint8_t dist, uint8_t time) {
+    hsv.s = scale8(hsv.s + dist - time - atan2_8(dy, dx), hsv.s);
+    return hsv;
 }
 
 bool BAND_SPIRAL_SAT(effect_params_t* params) {

quantum/rgb_matrix_animations/colorband_spiral_val_anim.h

@@ -2,8 +2,9 @@
 RGB_MATRIX_EFFECT(BAND_SPIRAL_VAL)
 #ifdef RGB_MATRIX_CUSTOM_EFFECT_IMPLS
 
-static void BAND_SPIRAL_VAL_math(HSV* hsv, int16_t dx, int16_t dy, uint8_t dist, uint8_t time) {
-    hsv->v = rgb_matrix_config.val + dist - time - atan2_8(dy, dx);
+static HSV BAND_SPIRAL_VAL_math(HSV hsv, int16_t dx, int16_t dy, uint8_t dist, uint8_t time) {
+    hsv.v = scale8(hsv.v + dist - time - atan2_8(dy, dx), hsv.v);
+    return hsv;
 }
 
 bool BAND_SPIRAL_VAL(effect_params_t* params) {

quantum/rgb_matrix_animations/colorband_val_anim.h

@@ -2,9 +2,10 @@
 RGB_MATRIX_EFFECT(BAND_VAL)
 #ifdef RGB_MATRIX_CUSTOM_EFFECT_IMPLS
 
-static void BAND_VAL_math(HSV* hsv, uint8_t i, uint8_t time) {
-    int16_t v = rgb_matrix_config.val - abs(scale8(g_led_config.point[i].x, 228) + 28 - time) * 8;
-    hsv->v = v < 0 ? 0 : v;
+static HSV BAND_VAL_math(HSV hsv, uint8_t i, uint8_t time) {
+    int16_t v = hsv.v - abs(scale8(g_led_config.point[i].x, 228) + 28 - time) * 8;
+    hsv.v = scale8(v < 0 ? 0 : v, hsv.v);
+    return hsv;
 }
 
 bool BAND_VAL(effect_params_t* params) {

quantum/rgb_matrix_animations/cycle_all_anim.h

@@ -2,9 +2,9 @@
 RGB_MATRIX_EFFECT(CYCLE_ALL)
 #ifdef RGB_MATRIX_CUSTOM_EFFECT_IMPLS
 
-static void CYCLE_ALL_math(HSV* hsv, uint8_t i, uint8_t time)
-{
-    hsv->h = time;
+static HSV CYCLE_ALL_math(HSV hsv,  uint8_t i, uint8_t time){
+    hsv.h = time;
+    return hsv;
 }
 
 bool CYCLE_ALL(effect_params_t* params) {

quantum/rgb_matrix_animations/cycle_left_right_anim.h

@@ -2,8 +2,9 @@
 RGB_MATRIX_EFFECT(CYCLE_LEFT_RIGHT)
 #ifdef RGB_MATRIX_CUSTOM_EFFECT_IMPLS
 
-static void CYCLE_LEFT_RIGHT_math(HSV* hsv, uint8_t i, uint8_t time) {
-    hsv->h = g_led_config.point[i].x - time;
+static HSV CYCLE_LEFT_RIGHT_math(HSV hsv,  uint8_t i, uint8_t time) {
+    hsv.h = g_led_config.point[i].x - time;
+    return hsv;
 }
 
 bool CYCLE_LEFT_RIGHT(effect_params_t* params) {

quantum/rgb_matrix_animations/cycle_out_in_anim.h

@@ -2,8 +2,9 @@
 RGB_MATRIX_EFFECT(CYCLE_OUT_IN)
 #ifdef RGB_MATRIX_CUSTOM_EFFECT_IMPLS
 
-static void CYCLE_OUT_IN_math(HSV* hsv, int16_t dx, int16_t dy, uint8_t dist, uint8_t time) {
-    hsv->h = 3 * dist / 2 + time;
+static HSV CYCLE_OUT_IN_math(HSV hsv,  int16_t dx, int16_t dy, uint8_t dist, uint8_t time) {
+    hsv.h = 3 * dist / 2 + time;
+    return hsv;
 }
 
 bool CYCLE_OUT_IN(effect_params_t* params) {

quantum/rgb_matrix_animations/cycle_out_in_dual_anim.h

@@ -2,10 +2,11 @@
 RGB_MATRIX_EFFECT(CYCLE_OUT_IN_DUAL)
 #ifdef RGB_MATRIX_CUSTOM_EFFECT_IMPLS
 
-static void CYCLE_OUT_IN_DUAL_math(HSV* hsv, int16_t dx, int16_t dy, uint8_t time) {
+static HSV CYCLE_OUT_IN_DUAL_math(HSV hsv,  int16_t dx, int16_t dy, uint8_t time) {
     dx = (k_rgb_matrix_center.x / 2) - abs8(dx);
     uint8_t dist = sqrt16(dx * dx + dy * dy);
-    hsv->h = 3 * dist + time;
+    hsv.h = 3 * dist + time;
+    return hsv;
 }
 
 bool CYCLE_OUT_IN_DUAL(effect_params_t* params) {

quantum/rgb_matrix_animations/cycle_pinwheel_anim.h

@@ -2,8 +2,9 @@
 RGB_MATRIX_EFFECT(CYCLE_PINWHEEL)
 #ifdef RGB_MATRIX_CUSTOM_EFFECT_IMPLS
 
-static void CYCLE_PINWHEEL_math(HSV* hsv, int16_t dx, int16_t dy, uint8_t time) {
-    hsv->h = atan2_8(dy, dx) + time;
+static HSV CYCLE_PINWHEEL_math(HSV hsv,  int16_t dx, int16_t dy, uint8_t time) {
+    hsv.h = atan2_8(dy, dx) + time;
+    return hsv;
 }
 
 bool CYCLE_PINWHEEL(effect_params_t* params) {

quantum/rgb_matrix_animations/cycle_spiral_anim.h

@@ -2,8 +2,9 @@
 RGB_MATRIX_EFFECT(CYCLE_SPIRAL)
 #ifdef RGB_MATRIX_CUSTOM_EFFECT_IMPLS
 
-static void CYCLE_SPIRAL_math(HSV* hsv, int16_t dx, int16_t dy, uint8_t dist, uint8_t time) {
-    hsv->h = dist - time - atan2_8(dy, dx);
+static HSV CYCLE_SPIRAL_math(HSV hsv,  int16_t dx, int16_t dy, uint8_t dist, uint8_t time) {
+    hsv.h = dist - time - atan2_8(dy, dx);
+    return hsv;
 }
 
 bool CYCLE_SPIRAL(effect_params_t* params) {

quantum/rgb_matrix_animations/cycle_up_down_anim.h

@@ -2,8 +2,9 @@
 RGB_MATRIX_EFFECT(CYCLE_UP_DOWN)
 #ifdef RGB_MATRIX_CUSTOM_EFFECT_IMPLS
 
-static void CYCLE_UP_DOWN_math(HSV* hsv, uint8_t i, uint8_t time) {
-    hsv->h = g_led_config.point[i].y - time;
+static HSV CYCLE_UP_DOWN_math(HSV hsv,  uint8_t i, uint8_t time) {
+    hsv.h = g_led_config.point[i].y - time;
+    return hsv;
 }
 
 bool CYCLE_UP_DOWN(effect_params_t* params) {

quantum/rgb_matrix_animations/dual_beacon_anim.h

@@ -2,8 +2,9 @@
 RGB_MATRIX_EFFECT(DUAL_BEACON)
 #ifdef RGB_MATRIX_CUSTOM_EFFECT_IMPLS
 
-static void DUAL_BEACON_math(HSV* hsv, int8_t sin, int8_t cos, uint8_t i, uint8_t time) {
-    hsv->h = ((g_led_config.point[i].y - k_rgb_matrix_center.y) * cos + (g_led_config.point[i].x - k_rgb_matrix_center.x) * sin) / 128 + rgb_matrix_config.hue;
+static HSV DUAL_BEACON_math(HSV hsv,  int8_t sin, int8_t cos, uint8_t i, uint8_t time) {
+    hsv.h += ((g_led_config.point[i].y - k_rgb_matrix_center.y) * cos + (g_led_config.point[i].x - k_rgb_matrix_center.x) * sin) / 128;
+    return hsv;
 }
 
 bool DUAL_BEACON(effect_params_t* params) {

quantum/rgb_matrix_animations/gradient_up_down_anim.h

@@ -5,13 +5,13 @@ RGB_MATRIX_EFFECT(GRADIENT_UP_DOWN)
 bool GRADIENT_UP_DOWN(effect_params_t* params) {
   RGB_MATRIX_USE_LIMITS(led_min, led_max);
 
-  HSV hsv = { 0, rgb_matrix_config.sat, rgb_matrix_config.val };
+  HSV hsv = rgb_matrix_config.hsv;
   uint8_t scale = scale8(64, rgb_matrix_config.speed);
   for (uint8_t i = led_min; i < led_max; i++) {
     RGB_MATRIX_TEST_LED_FLAGS();
     // The y range will be 0..64, map this to 0..4
     // Relies on hue being 8-bit and wrapping
-    hsv.h = rgb_matrix_config.hue + scale * (g_led_config.point[i].y >> 4);
+    hsv.h = rgb_matrix_config.hsv.h + scale * (g_led_config.point[i].y >> 4);
     RGB rgb = hsv_to_rgb(hsv);
     rgb_matrix_set_color(i, rgb.r, rgb.g, rgb.b);
   }

quantum/rgb_matrix_animations/jellybean_raindrops_anim.h

@@ -4,7 +4,7 @@ RGB_MATRIX_EFFECT(JELLYBEAN_RAINDROPS)
 
 static void jellybean_raindrops_set_color(int i, effect_params_t* params) {
   if (!HAS_ANY_FLAGS(g_led_config.flags[i], params->flags)) return;
-  HSV hsv = { rand() & 0xFF , rand() & 0xFF, rgb_matrix_config.val };
+  HSV hsv = { rand() & 0xFF , rand() & 0xFF, rgb_matrix_config.hsv.v };
   RGB rgb = hsv_to_rgb(hsv);
   rgb_matrix_set_color(i, rgb.r, rgb.g, rgb.b);
 }

quantum/rgb_matrix_animations/rainbow_beacon_anim.h

@@ -2,8 +2,9 @@
 RGB_MATRIX_EFFECT(RAINBOW_BEACON)
 #ifdef RGB_MATRIX_CUSTOM_EFFECT_IMPLS
 
-static void RAINBOW_BEACON_math(HSV* hsv, int8_t sin, int8_t cos, uint8_t i, uint8_t time) {
-    hsv->h = ((g_led_config.point[i].y - k_rgb_matrix_center.y) * 2 * cos + (g_led_config.point[i].x - k_rgb_matrix_center.x) * 2 * sin) / 128 + rgb_matrix_config.hue;
+static HSV RAINBOW_BEACON_math(HSV hsv,  int8_t sin, int8_t cos, uint8_t i, uint8_t time) {
+    hsv.h += ((g_led_config.point[i].y - k_rgb_matrix_center.y) * 2 * cos + (g_led_config.point[i].x - k_rgb_matrix_center.x) * 2 * sin) / 128;
+    return hsv;
 }
 
 bool RAINBOW_BEACON(effect_params_t* params) {

quantum/rgb_matrix_animations/rainbow_moving_chevron_anim.h

@@ -2,8 +2,9 @@
 RGB_MATRIX_EFFECT(RAINBOW_MOVING_CHEVRON)
 #ifdef RGB_MATRIX_CUSTOM_EFFECT_IMPLS
 
-static void RAINBOW_MOVING_CHEVRON_math(HSV* hsv, uint8_t i, uint8_t time) {
-    hsv->h = abs8(g_led_config.point[i].y - k_rgb_matrix_center.y) + (g_led_config.point[i].x - time) + rgb_matrix_config.hue;
+static HSV RAINBOW_MOVING_CHEVRON_math(HSV hsv,  uint8_t i, uint8_t time) {
+    hsv.h += abs8(g_led_config.point[i].y - k_rgb_matrix_center.y) + (g_led_config.point[i].x - time);
+    return hsv;
 }
 
 bool RAINBOW_MOVING_CHEVRON(effect_params_t* params) {

quantum/rgb_matrix_animations/rainbow_pinwheels_anim.h

@@ -2,8 +2,9 @@
 RGB_MATRIX_EFFECT(PINWHEELS)
 #ifdef RGB_MATRIX_CUSTOM_EFFECT_IMPLS
 
-static void PINWHEELS_math(HSV* hsv, int8_t sin, int8_t cos, uint8_t i, uint8_t time) {
-    hsv->h = ((g_led_config.point[i].y - k_rgb_matrix_center.y) * 3 * cos + (56 - abs8(g_led_config.point[i].x - k_rgb_matrix_center.x)) * 3 * sin) / 128 + rgb_matrix_config.hue;
+static HSV PINWHEELS_math(HSV hsv,  int8_t sin, int8_t cos, uint8_t i, uint8_t time) {
+    hsv.h += ((g_led_config.point[i].y - k_rgb_matrix_center.y) * 3 * cos + (56 - abs8(g_led_config.point[i].x - k_rgb_matrix_center.x)) * 3 * sin) / 128;
+    return hsv;
 }
 
 bool PINWHEELS(effect_params_t* params) {

quantum/rgb_matrix_animations/raindrops_anim.h

@@ -4,17 +4,17 @@ RGB_MATRIX_EFFECT(RAINDROPS)
 
 static void raindrops_set_color(int i, effect_params_t* params) {
   if (!HAS_ANY_FLAGS(g_led_config.flags[i], params->flags)) return;
-  HSV hsv = { 0 , rgb_matrix_config.sat, rgb_matrix_config.val };
+  HSV hsv = { 0 , rgb_matrix_config.hsv.s, rgb_matrix_config.hsv.v };
 
   // Take the shortest path between hues
-  int16_t deltaH = ((rgb_matrix_config.hue + 180) % 360 - rgb_matrix_config.hue) / 4;
+  int16_t deltaH = ((rgb_matrix_config.hsv.h + 180) % 360 - rgb_matrix_config.hsv.h) / 4;
   if (deltaH > 127) {
     deltaH -= 256;
   } else if (deltaH < -127) {
     deltaH += 256;
   }
 
-  hsv.h = rgb_matrix_config.hue + (deltaH * (rand() & 0x03));
+  hsv.h = rgb_matrix_config.hsv.h + (deltaH * (rand() & 0x03));
   RGB rgb = hsv_to_rgb(hsv);
   rgb_matrix_set_color(i, rgb.r, rgb.g, rgb.b);
 }

quantum/rgb_matrix_animations/solid_color_anim.h

@@ -4,8 +4,7 @@ RGB_MATRIX_EFFECT(SOLID_COLOR)
 bool SOLID_COLOR(effect_params_t* params) {
   RGB_MATRIX_USE_LIMITS(led_min, led_max);
 
-  HSV hsv = { rgb_matrix_config.hue, rgb_matrix_config.sat, rgb_matrix_config.val };
-  RGB rgb = hsv_to_rgb(hsv);
+  RGB rgb = hsv_to_rgb(rgb_matrix_config.hsv);
   for (uint8_t i = led_min; i < led_max; i++) {
     RGB_MATRIX_TEST_LED_FLAGS();
     rgb_matrix_set_color(i, rgb.r, rgb.g, rgb.b);

quantum/rgb_matrix_animations/solid_reactive_anim.h

@@ -3,8 +3,9 @@
 RGB_MATRIX_EFFECT(SOLID_REACTIVE)
 #ifdef RGB_MATRIX_CUSTOM_EFFECT_IMPLS
 
-static void SOLID_REACTIVE_math(HSV* hsv, uint16_t offset) {
-    hsv->h = rgb_matrix_config.hue + qsub8(130, offset);
+static HSV SOLID_REACTIVE_math(HSV hsv,  uint16_t offset) {
+    hsv.h += qsub8(130, offset);
+    return hsv;
 }
 
 bool SOLID_REACTIVE(effect_params_t* params) {

quantum/rgb_matrix_animations/solid_reactive_cross.h

@@ -11,7 +11,7 @@ RGB_MATRIX_EFFECT(SOLID_REACTIVE_MULTICROSS)
 
 #ifdef RGB_MATRIX_CUSTOM_EFFECT_IMPLS
 
-static void SOLID_REACTIVE_CROSS_math(HSV* hsv, int16_t dx, int16_t dy, uint8_t dist, uint16_t tick) {
+static HSV SOLID_REACTIVE_CROSS_math(HSV hsv,  int16_t dx, int16_t dy, uint8_t dist, uint16_t tick) {
     uint16_t effect = tick + dist;
     dx = dx < 0 ? dx * -1 : dx;
     dy = dy < 0 ? dy * -1 : dy;
@@ -20,7 +20,8 @@ static void SOLID_REACTIVE_CROSS_math(HSV* hsv, int16_t dx, int16_t dy, uint8_t
     effect += dx > dy ? dy : dx;
     if (effect > 255)
         effect = 255;
-    hsv->v = qadd8(hsv->v, 255 - effect);
+    hsv.v = qadd8(hsv.v, 255 - effect);
+    return hsv;
 }
 
 #ifndef DISABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS

quantum/rgb_matrix_animations/solid_reactive_nexus.h

@@ -11,7 +11,7 @@ RGB_MATRIX_EFFECT(SOLID_REACTIVE_MULTINEXUS)
 
 #ifdef RGB_MATRIX_CUSTOM_EFFECT_IMPLS
 
-static void SOLID_REACTIVE_NEXUS_math(HSV* hsv, int16_t dx, int16_t dy, uint8_t dist, uint16_t tick) {
+static HSV SOLID_REACTIVE_NEXUS_math(HSV hsv,  int16_t dx, int16_t dy, uint8_t dist, uint16_t tick) {
     uint16_t effect = tick - dist;
     if (effect > 255)
         effect = 255;
@@ -19,8 +19,9 @@ static void SOLID_REACTIVE_NEXUS_math(HSV* hsv, int16_t dx, int16_t dy, uint8_t
         effect = 255;
     if ((dx > 8 || dx < -8) && (dy > 8 || dy < -8))
         effect = 255;
-    hsv->v = qadd8(hsv->v, 255 - effect);
-    hsv->h = rgb_matrix_config.hue + dy / 4;
+    hsv.v = qadd8(hsv.v, 255 - effect);
+    hsv.h = rgb_matrix_config.hsv.h + dy / 4;
+    return hsv;
 }
 
 #ifndef DISABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS