Split Common: Serial Backlight LED fix (#3586 )

Keymap: adding my personal userspace to QMK master (#3605 )
* Adding my personal planck keymap * Adding readme.md to my keymap * Create my userspace add users/ishtob/ * Moved macros off keymap macros now exsists in my userspace, moved them off keyboard specific keymaps * Create my userspace add users/ishtob/ * rebase from main QMK repo
2018-08-11 11:10:23 -07:00 · 2018-08-10 08:30:21 -07:00 · 2018-08-10 08:22:09 -07:00 · 2018-08-10 08:15:11 -07:00 · 2018-08-09 18:09:43 -07:00 · 2018-08-09 18:03:34 -07:00
47 changed files with 1526 additions and 395 deletions
--- a/keyboards/bfake/readme.md
+++ b/keyboards/bfake/readme.md
@@ -11,4 +11,34 @@ Make example for this keyboard (after setting up your build environment):

    make bfake:default

-See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information.
+Flashing
+
+ps2avr(GB) boards use an atmega32a microcontroller and a different bootloader. It is not flashable using the regular QMK methods. 
+
+Windows: 
+1. Download [HIDBootFlash](http://vusb.wikidot.com/project:hidbootflash).
+2. Place your keyboard into reset. 
+3. Press the `Find Device` button and ensure that your keyboard is found.
+4. Press the `Open .hex File` button and locate the `.hex` file you created.
+5. Press the `Flash Device` button and wait for the process to complete. 
+
+macOS:
+1. Install homebrew by typing the following:   
+    ```
+    /usr/bin/ruby -e "$(curl -fsSL https://raw.githubusercontent.com/Homebrew/install/master/install)"
+    ```
+2. Install `crosspack-avr`.  
+    ```
+    brew cask install crosspack-avr
+    ```
+3. Install the following packages:
+    ```
+    brew install python
+    brew install pyusb
+    brew install --HEAD`https://raw.githubusercontent.com/robertgzr/homebrew-tap/master/bootloadhid.rb
+
+4. Place your keyboard into reset. 
+5. Flash the board by typing `bootloadHID -r` followed by the path to your `.hex` file. 
+
+
+See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information.
--- a/keyboards/bmini/readme.md
+++ b/keyboards/bmini/readme.md
@@ -11,4 +11,34 @@ Make example for this keyboard (after setting up your build environment):

    make bmini:default

-See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information.
+Flashing
+
+ps2avr(GB) boards use an atmega32a microcontroller and a different bootloader. It is not flashable using the regular QMK methods. 
+
+Windows: 
+1. Download [HIDBootFlash](http://vusb.wikidot.com/project:hidbootflash).
+2. Place your keyboard into reset. 
+3. Press the `Find Device` button and ensure that your keyboard is found.
+4. Press the `Open .hex File` button and locate the `.hex` file you created.
+5. Press the `Flash Device` button and wait for the process to complete. 
+
+macOS:
+1. Install homebrew by typing the following:   
+    ```
+    /usr/bin/ruby -e "$(curl -fsSL https://raw.githubusercontent.com/Homebrew/install/master/install)"
+    ```
+2. Install `crosspack-avr`.  
+    ```
+    brew cask install crosspack-avr
+    ```
+3. Install the following packages:
+    ```
+    brew install python
+    brew install pyusb
+    brew install --HEAD`https://raw.githubusercontent.com/robertgzr/homebrew-tap/master/bootloadhid.rb
+
+4. Place your keyboard into reset. 
+5. Flash the board by typing `bootloadHID -r` followed by the path to your `.hex` file. 
+
+
+See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information.
--- a/keyboards/canoe/readme.md
+++ b/keyboards/canoe/readme.md
@@ -11,4 +11,34 @@ Make example for this keyboard (after setting up your build environment):

    make canoe:default

+Flashing
+
+ps2avr(GB) boards use an atmega32a microcontroller and a different bootloader. It is not flashable using the regular QMK methods. 
+
+Windows: 
+1. Download [HIDBootFlash](http://vusb.wikidot.com/project:hidbootflash).
+2. Place your keyboard into reset. 
+3. Press the `Find Device` button and ensure that your keyboard is found.
+4. Press the `Open .hex File` button and locate the `.hex` file you created.
+5. Press the `Flash Device` button and wait for the process to complete. 
+
+macOS:
+1. Install homebrew by typing the following:   
+    ```
+    /usr/bin/ruby -e "$(curl -fsSL https://raw.githubusercontent.com/Homebrew/install/master/install)"
+    ```
+2. Install `crosspack-avr`.  
+    ```
+    brew cask install crosspack-avr
+    ```
+3. Install the following packages:
+    ```
+    brew install python
+    brew install pyusb
+    brew install --HEAD`https://raw.githubusercontent.com/robertgzr/homebrew-tap/master/bootloadhid.rb
+
+4. Place your keyboard into reset. 
+5. Flash the board by typing `bootloadHID -r` followed by the path to your `.hex` file. 
+
+
 See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information.
--- a/keyboards/catch22/keymaps/default/keymap.c
+++ b/keyboards/catch22/keymaps/default/keymap.c
@@ -7,11 +7,11 @@

 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 [_BASE] = LAYOUT( /* Base */
-           KC_A,    KC_B,  KC_C,  KC_D,  \
-           KC_E,    KC_F,  KC_G,  KC_H,  \
-  MO(_FN), KC_I,    KC_J,  KC_K,  KC_L,  \
-  KC_1,    KC_M,    KC_N,  KC_O,  KC_P,  \
-           KC_Q,    KC_R,  KC_S,  KC_T   \
+           KC_NLCK, KC_PSLS,  KC_PAST,  KC_BSPC,  \
+           KC_P7,   KC_P8,    KC_P9,    KC_PEQL,  \
+  MO(_FN), KC_P4,   KC_P5,    KC_P6,    KC_PPLS,  \
+  KC_PENT, KC_P1,   KC_P2,    KC_P3,    KC_PMNS,  \
+           KC_SPC,  KC_P0,    KC_PDOT,  KC_TAB    \
 ),
 [_FN] = LAYOUT(
           RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUI, \
--- a/keyboards/clueboard/66_hotswap/info.json
+++ b/keyboards/clueboard/66_hotswap/info.json
@@ -3,8 +3,12 @@
  "width": 16.5,
  "height": 5,
  "layouts": {
-    "KEYMAP": {
+    "LAYOUT": {
      "layout": [{"x": 0, "y": 0, "w": 1, "label": "GRAVE"}, {"x": 1, "y": 0, "w": 1, "label": "1"}, {"x": 2, "y": 0, "w": 1, "label": "2"}, {"x": 3, "y": 0, "w": 1, "label": "3"}, {"x": 4, "y": 0, "w": 1, "label": "4"}, {"x": 5, "y": 0, "w": 1, "label": "5"}, {"x": 6, "y": 0, "w": 1, "label": "6"}, {"x": 7, "y": 0, "w": 1, "label": "7"}, {"x": 8, "y": 0, "w": 1, "label": "8"}, {"x": 9, "y": 0, "w": 1, "label": "9"}, {"x": 10, "y": 0, "w": 1, "label": "0"}, {"x": 11, "y": 0, "w": 1, "label": "DASH"}, {"x": 12, "y": 0, "w": 1, "label": "EQUALSIGN"}, {"x": 13, "y": 0, "w": 1, "label": "YEN"}, {"x": 14, "y": 0, "w": 1, "label": "BACKSPACE"}, {"x": 15.5, "y": 0, "w": 1, "label": "PAGEUP"}, {"x": 0, "y": 1, "w": 1.5, "label": "TAB"}, {"x": 1.5, "y": 1, "w": 1, "label": "Q"}, {"x": 2.5, "y": 1, "w": 1, "label": "W"}, {"x": 3.5, "y": 1, "w": 1, "label": "E"}, {"x": 4.5, "y": 1, "w": 1, "label": "R"}, {"x": 5.5, "y": 1, "w": 1, "label": "T"}, {"x": 6.5, "y": 1, "w": 1, "label": "Y"}, {"x": 7.5, "y": 1, "w": 1, "label": "U"}, {"x": 8.5, "y": 1, "w": 1, "label": "I"}, {"x": 9.5, "y": 1, "w": 1, "label": "O"}, {"x": 10.5, "y": 1, "w": 1, "label": "P"}, {"x": 11.5, "y": 1, "w": 1, "label": "LBRACKET"}, {"x": 12.5, "y": 1, "w": 1, "label": "RBRACKET"}, {"x": 13.5, "y": 1, "w": 1.5, "label": "BACKSLASH"}, {"x": 15.5, "y": 1, "w": 1, "label": "PAGEDOWN"}, {"x": 0, "y": 2, "w": 1.75, "label": "CAPSLOCK"}, {"x": 1.75, "y": 2, "w": 1, "label": "A"}, {"x": 2.75, "y": 2, "w": 1, "label": "S"}, {"x": 3.75, "y": 2, "w": 1, "label": "D"}, {"x": 4.75, "y": 2, "w": 1, "label": "F"}, {"x": 5.75, "y": 2, "w": 1, "label": "G"}, {"x": 6.75, "y": 2, "w": 1, "label": "H"}, {"x": 7.75, "y": 2, "w": 1, "label": "J"}, {"x": 8.75, "y": 2, "w": 1, "label": "K"}, {"x": 9.75, "y": 2, "w": 1, "label": "L"}, {"x": 10.75, "y": 2, "w": 1, "label": "SEMICOLON"}, {"x": 11.75, "y": 2, "w": 1, "label": "QUOTE"}, {"x": 12.75, "y": 2, "w": 1, "label": "ISOHASH"}, {"x": 13.75, "y": 2, "w": 1.25, "label": "ENTER"}, {"x": 0, "y": 3, "w": 1.25, "label": "LSHIFT"}, {"x": 1.25, "y": 3, "w": 1, "label": "ISOBACKSLASH"}, {"x": 2.25, "y": 3, "w": 1, "label": "Z"}, {"x": 3.25, "y": 3, "w": 1, "label": "X"}, {"x": 4.25, "y": 3, "w": 1, "label": "C"}, {"x": 5.25, "y": 3, "w": 1, "label": "V"}, {"x": 6.25, "y": 3, "w": 1, "label": "B"}, {"x": 7.25, "y": 3, "w": 1, "label": "N"}, {"x": 8.25, "y": 3, "w": 1, "label": "M"}, {"x": 9.25, "y": 3, "w": 1, "label": "COMMA"}, {"x": 10.25, "y": 3, "w": 1, "label": "PERIOD"}, {"x": 11.25, "y": 3, "w": 1, "label": "SLASH"}, {"x": 12.25, "y": 3, "w": 1, "label": "JPBACKSLASH"}, {"x": 13.25, "y": 3, "w": 1.25, "label": "RSHIFT"}, {"x": 14.5, "y": 3, "w": 1, "label": "UP"}, {"x": 0, "y": 4, "w": 1.25, "label": "LCTRL"}, {"x": 1.25, "y": 4, "w": 1, "label": "LALT"}, {"x": 2.25, "y": 4, "w": 1.25, "label": "LCMD"}, {"x": 3.5, "y": 4, "w": 1.25, "label": "MUHENKAN"}, {"x": 4.75, "y": 4, "w": 2, "label": "SPACE1"}, {"x": 6.75, "y": 4, "w": 2, "label": "SPACE2"}, {"x": 8.75, "y": 4, "w": 1.25, "label": "HENKAN"}, {"x": 10, "y": 4, "w": 1.25, "label": "RCMD"}, {"x": 11.25, "y": 4, "w": 1, "label": "RCTRL"}, {"x": 12.25, "y": 4, "w": 1.25, "label": "FN"}, {"x": 13.5, "y": 4, "w": 1, "label": "LEFT"}, {"x": 14.5, "y": 4, "w": 1, "label": "DOWN"}, {"x": 15.5, "y": 4, "w": 1, "label": "RIGHT"}]
+    },
+
+    "LAYOUT_66_ansi": {
+      "layout": [{"label":"~", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"@", "x":2, "y":0}, {"label":"#", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"label":"Backspace", "x":13, "y":0, "w":2}, {"x":15.5, "y":0}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, {"label":"|", "x":13.5, "y":1, "w":1.5}, {"x":15.5, "y":1}, {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"\"", "x":11.75, "y":2}, {"label":"Enter", "x":12.75, "y":2, "w":2.25}, {"label":"Shift", "x":0, "y":3, "w":2.25}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":"<", "x":9.25, "y":3}, {"label":">", "x":10.25, "y":3}, {"label":"?", "x":11.25, "y":3}, {"label":"Shift", "x":12.25, "y":3, "w":2.25}, {"x":14.5, "y":3}, {"label":"Ctrl", "x":0, "y":4, "w":1.25}, {"label":"Win", "x":1.25, "y":4, "w":1.25}, {"label":"Alt", "x":2.5, "y":4, "w":1.25}, {"x":3.75, "y":4, "w":6.25}, {"label":"Alt", "x":10, "y":4, "w":1.25}, {"label":"Win", "x":11.25, "y":4}, {"label":"Menu", "x":12.25, "y":4, "w":1.25}, {"x":13.5, "y":4}, {"x":14.5, "y":4}, {"x":15.5, "y":4}]
    }
  }
 }
--- a/keyboards/clueboard/66_hotswap/readme.md
+++ b/keyboards/clueboard/66_hotswap/readme.md
@@ -4,10 +4,10 @@

 A fully customizable 66% keyboard with Hot Swap sockets.

-* Keyboard Maintainer: [Zach White](https://github.com/skullydazed)
+* Keyboard Maintainer: [Zach White](https://github.com/skullydazed)   
 * Hardware Supported: Clueboard 66% HotSwap PCB
  * 2.9
-* Hardware Availability: [clueboard.co](https://clueboard.co/)
+* Hardware Availability: [clueboard.co](https://clueboard.co/)   

 Make example for this keyboard (after setting up your build environment):

--- a/keyboards/ergodone/keymaps/eozaki/keymap.c
+++ b/keyboards/ergodone/keymaps/eozaki/keymap.c
@@ -0,0 +1,223 @@
+#include QMK_KEYBOARD_H
+#include "debug.h"
+#include "action_layer.h"
+#include "version.h"
+
+#define BASE 0 // default layer
+#define SYMB 1 // symbols
+#define MDIA 2 // media keys
+
+enum custom_keycodes {
+  PLACEHOLDER = SAFE_RANGE, // can always be here
+  EPRM,
+  VRSN,
+  RGB_SLD
+};
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+/* Keymap 0: Basic layer
+ *
+ * ,--------------------------------------------------.           ,--------------------------------------------------.
+ * | Esc    |   1  |   2  |   3  |   4  |   5  |  ~   |           |  '   |   6  |   7  |   8  |   9  |   0  |   =    |
+ * |--------+------+------+------+------+-------------|           |------+------+------+------+------+------+--------|
+ * | Del    |   Q  |   W  |   E  |   R  |   T  |  ~   |           |  "   |   Y  |   U  |   I  |   O  |   P  |   -    |
+ * |--------+------+------+------+------+------|  `   |           |      |------+------+------+------+------+--------|
+ * | Ctrl   |   A  |   S  |   D  |   F  |   G  |------|           |------|   H  |   J  |   K  |   L  |  ;   |    \   |
+ * |--------+------+------+------+------+------|  {   |           |  }   |------+------+------+------+------+--------|
+ * | LAlt   |   Z  |   X  |   C  |   V  |   B  |  [   |           |  ]   |   N  |   M  |   ,  |   .  |  /   | LShift |
+ * `--------+------+------+------+------+-------------'           `-------------+------+------+------+------+--------'
+ *   | LT-1 |  F4  |  F5  |  F6  |  F11 |                                       | Left | Down |  Up  | Right|  RAlt  |
+ *   `----------------------------------'                                       `----------------------------------'
+ *                                        ,-------------.       ,-------------.
+ *                                        |  L1  | Prev |       | Vol+ |  L2  |
+ *                                 ,------|------|------|       |------+--------+------.
+ *                                 |      |      | Play |       | Vol- |        |      |
+ *                                 | Space|Backsp|------|       |------|  Tab   |Enter |
+ *                                 |      |ace   | Next |       | Mute |        |      |
+ *                                 `--------------------'       `----------------------'
+ */
+// If it accepts an argument (i.e, is a function), it doesn't need KC_.
+// Otherwise, it needs KC_*
+[BASE] = LAYOUT_ergodox(  // layer 0 : default
+        // left hand
+        KC_ESC,         KC_1,         KC_2,   KC_3,   KC_4,   KC_5,   LSFT(KC_GRV),
+        KC_DELT,        KC_Q,         KC_W,   KC_E,   KC_R,   KC_T,   KC_GRV,
+        KC_LCTL,        KC_A,         KC_S,   KC_D,   KC_F,   KC_G,
+        KC_LALT,        KC_Z,         KC_X,   KC_C,   KC_V,   KC_B,   KC_LBRC,
+        LT(SYMB, KC_F2),       KC_F4,        KC_F5,  KC_F6,  KC_F11,
+                                                   TG(SYMB),  KC_MPRV,
+                                                              KC_MPLY,
+                                               KC_SPC,KC_BSPC,KC_MNXT,
+        // right hand
+             KC_QUOT,         KC_6,   KC_7,   KC_8,   KC_9,   KC_0,             KC_EQL,
+             LSFT(KC_QUOT),  KC_Y,   KC_U,   KC_I,   KC_O,   KC_P,             KC_MINS,
+                              KC_H,   KC_J,   KC_K,   KC_L,   LT(MDIA, KC_SCLN),KC_BSLS,
+             KC_RBRC,         KC_N,   KC_M,   KC_COMM,KC_DOT, KC_SLSH,          KC_LSFT,
+                              KC_LEFT,KC_DOWN,KC_UP,  KC_RGHT,KC_RALT,
+             KC_VOLU,        TG(MDIA),
+             KC_VOLD,
+             KC_MUTE,KC_TAB, KC_ENT
+    ),
+/* Keymap 1: Symbol Layer
+ *
+ * ,---------------------------------------------------.           ,--------------------------------------------------.
+ * |Version  |  F1  |  F2  |  F3  |  F4  |  F5  |      |           |      |  F6  |  F7  |  F8  |  F9  |  F10 |   F11  |
+ * |---------+------+------+------+------+------+------|           |------+------+------+------+------+------+--------|
+ * |         |   !  |   @  |   {  |   }  |   |  |      |           |      |   Up |   7  |   8  |   9  |   *  |   F12  |
+ * |---------+------+------+------+------+------|      |           |      |------+------+------+------+------+--------|
+ * |         |   #  |   $  |   (  |   )  |   `  |------|           |------| Down |   4  |   5  |   6  |   +  |        |
+ * |---------+------+------+------+------+------|      |           |      |------+------+------+------+------+--------|
+ * |         |   %  |   ^  |   [  |   ]  |   ~  |      |           |      |   &  |   1  |   2  |   3  |   \  |        |
+ * `---------+------+------+------+------+-------------'           `-------------+------+------+------+------+--------'
+ *   | EPRM  |      |      |      |      |                                       |      |    . |   0  |   =  |      |
+ *   `-----------------------------------'                                       `----------------------------------'
+ *                                        ,-------------.       ,-------------.
+ *                                        |Animat|      |       |Toggle|Solid |
+ *                                 ,------|------|------|       |------+------+------.
+ *                                 |Bright|Bright|      |       |      |Hue-  |Hue+  |
+ *                                 |ness- |ness+ |------|       |------|      |      |
+ *                                 |      |      |      |       |      |      |      |
+ *                                 `--------------------'       `--------------------'
+ */
+// SYMBOLS
+[SYMB] = LAYOUT_ergodox(
+       // left hand
+       VRSN,   KC_F1,  KC_F2,  KC_F3,  KC_F4,  KC_F5,  KC_TRNS,
+       KC_TRNS,KC_EXLM,KC_AT,  KC_LCBR,KC_RCBR,KC_PIPE,KC_TRNS,
+       KC_TRNS,KC_HASH,KC_DLR, KC_LPRN,KC_RPRN,KC_GRV,
+       KC_TRNS,KC_PERC,KC_CIRC,KC_LBRC,KC_RBRC,KC_TILD,KC_TRNS,
+          EPRM,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,
+                                       RGB_MOD,KC_TRNS,
+                                               KC_TRNS,
+                               RGB_VAD,RGB_VAI,KC_TRNS,
+       // right hand
+       KC_TRNS, KC_F6,   KC_F7,  KC_F8,   KC_F9,   KC_F10,  KC_F11,
+       KC_TRNS, KC_UP,   KC_7,   KC_8,    KC_9,    KC_ASTR, KC_F12,
+                KC_DOWN, KC_4,   KC_5,    KC_6,    KC_PLUS, KC_TRNS,
+       KC_TRNS, KC_AMPR, KC_1,   KC_2,    KC_3,    KC_BSLS, KC_TRNS,
+                         KC_TRNS,KC_DOT,  KC_0,    KC_EQL,  KC_TRNS,
+       RGB_TOG, RGB_SLD,
+       KC_TRNS,
+       KC_TRNS, RGB_HUD, RGB_HUI
+),
+/* Keymap 2: Media and mouse keys
+ *
+ * ,--------------------------------------------------.           ,--------------------------------------------------.
+ * |        |      |      |      |      |      |      |           |      |      |      |      |      |      |        |
+ * |--------+------+------+------+------+-------------|           |------+------+------+------+------+------+--------|
+ * |        |      |      | MsUp |      |      |      |           |      |      |      |      |      |      |        |
+ * |--------+------+------+------+------+------|      |           |      |------+------+------+------+------+--------|
+ * |        |      |MsLeft|MsDown|MsRght|      |------|           |------|      |      |      |      |      |  Play  |
+ * |--------+------+------+------+------+------|      |           |      |------+------+------+------+------+--------|
+ * |        |      |      |      |      |      |      |           |      |      |      | Prev | Next |      |        |
+ * `--------+------+------+------+------+-------------'           `-------------+------+------+------+------+--------'
+ *   |      |      |      | Lclk | Rclk |                                       |VolUp |VolDn | Mute |      |      |
+ *   `----------------------------------'                                       `----------------------------------'
+ *                                        ,-------------.       ,-------------.
+ *                                        |      |      |       |      |      |
+ *                                 ,------|------|------|       |------+------+------.
+ *                                 |      |      |      |       |      |      |Brwser|
+ *                                 |      |      |------|       |------|      |Back  |
+ *                                 |      |      |      |       |      |      |      |
+ *                                 `--------------------'       `--------------------'
+ */
+// MEDIA AND MOUSE
+[MDIA] = LAYOUT_ergodox(
+       KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+       KC_TRNS, KC_TRNS, KC_TRNS, KC_MS_U, KC_TRNS, KC_TRNS, KC_TRNS,
+       KC_TRNS, KC_TRNS, KC_MS_L, KC_MS_D, KC_MS_R, KC_TRNS,
+       KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+       KC_TRNS, KC_TRNS, KC_TRNS, KC_BTN1, KC_BTN2,
+                                           KC_TRNS, KC_TRNS,
+                                                    KC_TRNS,
+                                  KC_TRNS, KC_TRNS, KC_TRNS,
+    // right hand
+       KC_TRNS,  KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+       KC_TRNS,  KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+                 KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_MPLY,
+       KC_TRNS,  KC_TRNS, KC_TRNS, KC_MPRV, KC_MNXT, KC_TRNS, KC_TRNS,
+                          KC_VOLU, KC_VOLD, KC_MUTE, KC_TRNS, KC_TRNS,
+       KC_TRNS, KC_TRNS,
+       KC_TRNS,
+       KC_TRNS, KC_TRNS, KC_WBAK
+),
+};
+
+const uint16_t PROGMEM fn_actions[] = {
+    [1] = ACTION_LAYER_TAP_TOGGLE(SYMB)                // FN1 - Momentary Layer 1 (Symbols)
+};
+
+const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
+{
+  // MACRODOWN only works in this function
+      switch(id) {
+        case 0:
+        if (record->event.pressed) {
+          SEND_STRING (QMK_KEYBOARD "/" QMK_KEYMAP " @ " QMK_VERSION);
+        }
+        break;
+        case 1:
+        if (record->event.pressed) { // For resetting EEPROM
+          eeconfig_init();
+        }
+        break;
+      }
+    return MACRO_NONE;
+};
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+  switch (keycode) {
+    // dynamically generate these.
+    case EPRM:
+      if (record->event.pressed) {
+        eeconfig_init();
+      }
+      return false;
+      break;
+    case VRSN:
+      if (record->event.pressed) {
+        SEND_STRING (QMK_KEYBOARD "/" QMK_KEYMAP " @ " QMK_VERSION);
+      }
+      return false;
+      break;
+    case RGB_SLD:
+      if (record->event.pressed) {
+        #ifdef RGBLIGHT_ENABLE
+          rgblight_mode(1);
+        #endif
+      }
+      return false;
+      break;
+  }
+  return true;
+}
+
+// Runs just one time when the keyboard initializes.
+void matrix_init_user(void) {
+
+};
+
+
+// Runs constantly in the background, in a loop.
+void matrix_scan_user(void) {
+
+    uint8_t layer = biton32(layer_state);
+
+    ergodox_board_led_off();
+    ergodox_right_led_1_off();
+    ergodox_right_led_2_off();
+    ergodox_right_led_3_off();
+    switch (layer) {
+      // TODO: Make this relevant to the ErgoDox EZ.
+        case 1:
+            ergodox_right_led_1_on();
+            break;
+        case 2:
+            ergodox_right_led_2_on();
+            break;
+        default:
+            // none
+            break;
+    }
+
+};
--- a/keyboards/ergodone/keymaps/eozaki/readme.md
+++ b/keyboards/ergodone/keymaps/eozaki/readme.md
@@ -0,0 +1,13 @@
+# ErgoDox EZ Based Configuration
+
+## Changelog
+
+* Aug 2018:
+  * New custom L0 layout.
+* Dec 2016:
+  * Added LED keys
+  * Refreshed layout graphic, comes from http://configure.ergodox-ez.com now.
+* Sep 22, 2016:
+  * Created a new key in layer 1 (bottom-corner key) that resets the EEPROM.
+* Feb 2, 2016 (V1.1): 
+  * Made the right-hand quote key double as Cmd/Win on hold. So you get ' when you tap it, " when you tap it with Shift, and Cmd or Win when you hold it. You can then use it as a modifier, or just press and hold it for a moment (and then let go) to send a single Cmd or Win keystroke (handy for opening the Start menu on Windows).
--- a/keyboards/facew/readme.md
+++ b/keyboards/facew/readme.md
@@ -15,10 +15,39 @@ Hardware Availability: https://mechanicalkeyboards.com/shop/index.php?l=product_
 - The FaceW Sprit Edition can be purchased on [mechanicalkeyboards.com](www.mechanicalkeyboards.com)
 - Uses ps2avru instead of ps2avrgb
 - To put in reset mode hold `q` while inserting the USB cable
- When flashing, type `bootloadHID -r yourfile.hex` and wait awhile

 Make example for this keyboard (after setting up your build environment):

    make facew:default

+Flashing
+
+ps2avr(GB) boards use an atmega32a microcontroller and a different bootloader. It is not flashable using the regular QMK methods. 
+
+Windows: 
+1. Download [HIDBootFlash](http://vusb.wikidot.com/project:hidbootflash).
+2. Place your keyboard into reset. 
+3. Press the `Find Device` button and ensure that your keyboard is found.
+4. Press the `Open .hex File` button and locate the `.hex` file you created.
+5. Press the `Flash Device` button and wait for the process to complete. 
+
+macOS:
+1. Install homebrew by typing the following:   
+    ```
+    /usr/bin/ruby -e "$(curl -fsSL https://raw.githubusercontent.com/Homebrew/install/master/install)"
+    ```
+2. Install `crosspack-avr`.  
+    ```
+    brew cask install crosspack-avr
+    ```
+3. Install the following packages:
+    ```
+    brew install python
+    brew install pyusb
+    brew install --HEAD`https://raw.githubusercontent.com/robertgzr/homebrew-tap/master/bootloadhid.rb
+
+4. Place your keyboard into reset. 
+5. Flash the board by typing `bootloadHID -r` followed by the path to your `.hex` file. 
+
+
 See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information.
--- a/keyboards/helix/rev1/keymaps/OLED_sample/serial_config.h
+++ b/keyboards/helix/rev1/keymaps/OLED_sample/serial_config.h
@@ -9,7 +9,7 @@
 #define SERIAL_PIN_INTERRUPT INT2_vect

 #define SERIAL_SLAVE_BUFFER_LENGTH MATRIX_ROWS/2
-#define SERIAL_MASTER_BUFFER_LENGTH 1
+#define SERIAL_MASTER_BUFFER_LENGTH 0

 //// #error rev1/keymaps/OLED_sample serial config

--- a/keyboards/helix/rev1/rules.mk
+++ b/keyboards/helix/rev1/rules.mk
@@ -1,4 +1,4 @@
-SRC += rev1/matrix.c \
-	   rev1/split_util.c
+SRC += rev1/matrix.c
+SRC += rev1/split_util.c

 BACKLIGHT_ENABLE = no
--- a/keyboards/helix/rev1/serial_config.h
+++ b/keyboards/helix/rev1/serial_config.h
@@ -9,7 +9,7 @@
 #define SERIAL_PIN_INTERRUPT INT0_vect

 #define SERIAL_SLAVE_BUFFER_LENGTH MATRIX_ROWS/2
-#define SERIAL_MASTER_BUFFER_LENGTH 1
+#define SERIAL_MASTER_BUFFER_LENGTH 0

 /// #error rev1 serial config

--- a/keyboards/helix/rev2/keymaps/default/config.h
+++ b/keyboards/helix/rev2/keymaps/default/config.h
@@ -21,6 +21,9 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #ifndef CONFIG_USER_H
 #define CONFIG_USER_H

+// if you need more program area, try uncomment follow line
+//#include "serial_config_simpleapi.h"
+
 // place overrides here

 #endif /* CONFIG_USER_H */
--- a/keyboards/helix/rev2/keymaps/edvorakjp/config.h
+++ b/keyboards/helix/rev2/keymaps/edvorakjp/config.h
@@ -1,6 +1,9 @@
 #ifndef CONFIG_USER_H
 #define CONFIG_USER_H

+// if you need more program area, try uncomment follow line
+//#include "serial_config_simpleapi.h"
+
 #undef TAPPING_FORCE_HOLD
 #undef TAPPING_TERM
 #define TAPPING_TERM 120
--- a/keyboards/helix/rev2/keymaps/five_rows/config.h
+++ b/keyboards/helix/rev2/keymaps/five_rows/config.h
@@ -21,6 +21,12 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #ifndef CONFIG_USER_H
 #define CONFIG_USER_H

+// if you need more program area, try uncomment follow line
+//#include "serial_config_simpleapi.h"
+
+#undef TAPPING_TERM
+#define TAPPING_TERM 140
+
 // place overrides here

 #endif /* CONFIG_USER_H */
--- a/keyboards/helix/rev2/keymaps/five_rows_jis/config.h
+++ b/keyboards/helix/rev2/keymaps/five_rows_jis/config.h
@@ -23,6 +23,9 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.

 // place overrides here

+// if you need more program area, try uncomment follow line
+//#include "serial_config_simpleapi.h"
+
 #ifdef MOUSEKEY_ENABLE
  #undef MOUSEKEY_INTERVAL
  #define MOUSEKEY_INTERVAL 0
--- a/keyboards/helix/rev2/keymaps/froggy/config.h
+++ b/keyboards/helix/rev2/keymaps/froggy/config.h
@@ -21,6 +21,9 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #ifndef CONFIG_USER_H
 #define CONFIG_USER_H

+// if you need more program area, try uncomment follow line
+//#include "serial_config_simpleapi.h"
+
 #undef TAPPING_TERM
 #define TAPPING_TERM 200
 #define ONESHOT_TAP_TOGGLE 5 /* Tapping this number of times holds the key until tapped this number of times again. */
--- a/keyboards/helix/rev2/keymaps/led_test/config.h
+++ b/keyboards/helix/rev2/keymaps/led_test/config.h
@@ -21,6 +21,9 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #ifndef CONFIG_USER_H
 #define CONFIG_USER_H

+// if you need more program area, try uncomment follow line
+#include "serial_config_simpleapi.h"
+
 // place overrides here

 #endif /* CONFIG_USER_H */
--- a/keyboards/helix/rev2/matrix.c
+++ b/keyboards/helix/rev2/matrix.c
@@ -20,6 +20,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */
 #include <stdint.h>
 #include <stdbool.h>
+#include <string.h>
 #include <avr/io.h>
 #include <avr/wdt.h>
 #include <avr/interrupt.h>
@@ -34,7 +35,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #ifdef USE_MATRIX_I2C
 #  include "i2c.h"
 #else // USE_SERIAL
-#  include "serial.h"
+#  include "split_scomm.h"
 #endif

 #ifndef DEBOUNCE
@@ -102,6 +103,8 @@ void matrix_init(void)
    init_cols();

    TX_RX_LED_INIT;
+    TXLED0;
+    RXLED0;

    // initialize matrix state: all keys off
    for (uint8_t i=0; i < MATRIX_ROWS; i++) {
@@ -178,17 +181,20 @@ i2c_error: // the cable is disconnceted, or something else went wrong

 #else // USE_SERIAL

-int serial_transaction(void) {
+int serial_transaction(int master_changed) {
    int slaveOffset = (isLeftHand) ? (ROWS_PER_HAND) : 0;
+#ifdef SERIAL_USE_MULTI_TRANSACTION
+    int ret=serial_update_buffers(master_changed);
+#else
    int ret=serial_update_buffers();
+#endif
    if (ret ) {
-        if(ret==2)RXLED1;
+        if(ret==2) RXLED1;
        return 1;
    }
-RXLED0;
-    for (int i = 0; i < ROWS_PER_HAND; ++i) {
-        matrix[slaveOffset+i] = serial_slave_buffer[i];
-    }
+    RXLED0;
+    memcpy(&matrix[slaveOffset],
+        (void *)serial_slave_buffer, sizeof(serial_slave_buffer));
    return 0;
 }
 #endif
@@ -199,19 +205,9 @@ uint8_t matrix_scan(void)
        matrix_master_scan();
    }else{
        matrix_slave_scan();
-
-//        if(serial_slave_DATA_CORRUPT()){
-//          TXLED0;
-          int offset = (isLeftHand) ? ROWS_PER_HAND : 0;
-
-          for (int i = 0; i < ROWS_PER_HAND; ++i) {
-              matrix[offset+i] = serial_master_buffer[i];
-          }
-
-//        }else{
-//          TXLED1;
-//        }
-
+        int offset = (isLeftHand) ? ROWS_PER_HAND : 0;
+        memcpy(&matrix[offset],
+               (void *)serial_master_buffer, sizeof(serial_master_buffer));
        matrix_scan_quantum();
    }
    return 1;
@@ -221,6 +217,7 @@ uint8_t matrix_scan(void)
 uint8_t matrix_master_scan(void) {

    int ret = _matrix_scan();
+    int mchanged = 1;

 #ifndef KEYBOARD_helix_rev1
    int offset = (isLeftHand) ? 0 : ROWS_PER_HAND;
@@ -231,16 +228,19 @@ uint8_t matrix_master_scan(void) {
 //        i2c_slave_buffer[i] = matrix[offset+i];
 //    }
 #else // USE_SERIAL
-    for (int i = 0; i < ROWS_PER_HAND; ++i) {
-        serial_master_buffer[i] = matrix[offset+i];
-    }
+  #ifdef SERIAL_USE_MULTI_TRANSACTION
+    mchanged = memcmp((void *)serial_master_buffer,
+		      &matrix[offset], sizeof(serial_master_buffer));
+  #endif
+    memcpy((void *)serial_master_buffer,
+	   &matrix[offset], sizeof(serial_master_buffer));
 #endif
 #endif

 #ifdef USE_MATRIX_I2C
    if( i2c_transaction() ) {
 #else // USE_SERIAL
-    if( serial_transaction() ) {
+    if( serial_transaction(mchanged) ) {
 #endif
        // turn on the indicator led when halves are disconnected
        TXLED1;
@@ -274,9 +274,19 @@ void matrix_slave_scan(void) {
        i2c_slave_buffer[i] = matrix[offset+i];
    }
 #else // USE_SERIAL
+  #ifdef SERIAL_USE_MULTI_TRANSACTION
+    int change = 0;
+  #endif
    for (int i = 0; i < ROWS_PER_HAND; ++i) {
+  #ifdef SERIAL_USE_MULTI_TRANSACTION
+        if( serial_slave_buffer[i] != matrix[offset+i] )
+	    change = 1;
+  #endif
        serial_slave_buffer[i] = matrix[offset+i];
    }
+  #ifdef SERIAL_USE_MULTI_TRANSACTION
+    slave_buffer_change_count += change;
+  #endif
 #endif
 }

--- a/keyboards/helix/rev2/rules.mk
+++ b/keyboards/helix/rev2/rules.mk
@@ -1,3 +1,4 @@
-SRC += rev2/matrix.c \
-	   rev2/split_util.c \
-	   ws2812.c
+SRC += rev2/matrix.c
+SRC += rev2/split_util.c
+SRC += rev2/split_scomm.c
+SRC += ws2812.c
--- a/keyboards/helix/rev2/serial_config.h
+++ b/keyboards/helix/rev2/serial_config.h
@@ -8,8 +8,7 @@
 #define SERIAL_PIN_MASK _BV(PD2)
 #define SERIAL_PIN_INTERRUPT INT2_vect

-#define SERIAL_SLAVE_BUFFER_LENGTH MATRIX_ROWS/2
-#define SERIAL_MASTER_BUFFER_LENGTH MATRIX_ROWS/2
+#define SERIAL_USE_MULTI_TRANSACTION

 //// #error rev2 serial config

--- a/keyboards/helix/rev2/serial_config_simpleapi.h
+++ b/keyboards/helix/rev2/serial_config_simpleapi.h
@@ -0,0 +1,8 @@
+#ifndef SERIAL_CONFIG_SIMPLEAPI_H
+#define SERIAL_CONFIG_SIMPLEAPI_H
+
+#undef SERIAL_USE_MULTI_TRANSACTION
+#define SERIAL_SLAVE_BUFFER_LENGTH MATRIX_ROWS/2
+#define SERIAL_MASTER_BUFFER_LENGTH MATRIX_ROWS/2
+
+#endif // SERIAL_CONFIG_SIMPLEAPI_H
--- a/keyboards/helix/rev2/split_scomm.c
+++ b/keyboards/helix/rev2/split_scomm.c
@@ -0,0 +1,73 @@
+#ifdef USE_SERIAL
+#ifdef SERIAL_USE_MULTI_TRANSACTION
+/* --- USE flexible API (using multi-type transaction function) --- */
+
+#include <stdbool.h>
+#include <stdint.h>
+#include <stddef.h>
+#include <split_scomm.h>
+#include "serial.h"
+#ifdef SERIAL_DEBUG_MODE
+#include <avr/io.h>
+#endif
+
+uint8_t volatile serial_slave_buffer[SERIAL_SLAVE_BUFFER_LENGTH] = {0};
+uint8_t volatile serial_master_buffer[SERIAL_MASTER_BUFFER_LENGTH] = {0};
+uint8_t volatile status_com = 0;
+uint8_t volatile status1 = 0;
+uint8_t slave_buffer_change_count = 0;
+uint8_t s_change_old = 0xff;
+
+SSTD_t transactions[] = {
+#define GET_SLAVE_STATUS 0
+    /* master buffer not changed, only recive slave_buffer_change_count */
+    { (uint8_t *)&status_com,
+      0, NULL,
+      sizeof(slave_buffer_change_count), &slave_buffer_change_count,
+    },
+#define PUT_MASTER_GET_SLAVE_STATUS 1
+    /* master buffer changed need send, and recive slave_buffer_change_count  */
+    { (uint8_t *)&status_com,
+      sizeof(serial_master_buffer), (uint8_t *)serial_master_buffer,
+      sizeof(slave_buffer_change_count), &slave_buffer_change_count,
+    },
+#define GET_SLAVE_BUFFER 2
+    /* recive serial_slave_buffer */
+    { (uint8_t *)&status1,
+      0, NULL,
+      sizeof(serial_slave_buffer), (uint8_t *)serial_slave_buffer
+    }
+};
+
+void serial_master_init(void)
+{
+    soft_serial_initiator_init(transactions);
+}
+
+void serial_slave_init(void)
+{
+    soft_serial_target_init(transactions);
+}
+
+// 0 => no error
+// 1 => slave did not respond
+// 2 => checksum error
+int serial_update_buffers(int master_update)
+{
+    int status;
+    static int need_retry = 0;
+    if( s_change_old != slave_buffer_change_count ) {
+	status = soft_serial_transaction(GET_SLAVE_BUFFER);
+	if( status == TRANSACTION_END )
+	    s_change_old = slave_buffer_change_count;
+    }
+    if( !master_update && !need_retry)
+	status = soft_serial_transaction(GET_SLAVE_STATUS);
+    else
+	status = soft_serial_transaction(PUT_MASTER_GET_SLAVE_STATUS);
+    need_retry = ( status == TRANSACTION_END ) ? 0 : 1;
+    return status;
+}
+
+#endif // SERIAL_USE_MULTI_TRANSACTION
+#endif /* USE_SERIAL */
--- a/keyboards/helix/rev2/split_scomm.h
+++ b/keyboards/helix/rev2/split_scomm.h
@@ -0,0 +1,24 @@
+#ifndef SPLIT_COMM_H
+#define SPLIT_COMM_H
+
+#ifndef SERIAL_USE_MULTI_TRANSACTION
+/* --- USE Simple API (OLD API, compatible with let's split serial.c) --- */
+#include "serial.h"
+
+#else
+/* --- USE flexible API (using multi-type transaction function) --- */
+// Buffers for master - slave communication
+#define SERIAL_SLAVE_BUFFER_LENGTH MATRIX_ROWS/2
+#define SERIAL_MASTER_BUFFER_LENGTH MATRIX_ROWS/2
+
+extern volatile uint8_t serial_slave_buffer[SERIAL_SLAVE_BUFFER_LENGTH];
+extern volatile uint8_t serial_master_buffer[SERIAL_MASTER_BUFFER_LENGTH];
+extern uint8_t slave_buffer_change_count;
+
+void serial_master_init(void);
+void serial_slave_init(void);
+int serial_update_buffers(int master_changed);
+
+#endif
+
+#endif /* SPLIT_COMM_H */
--- a/keyboards/helix/rev2/split_util.c
+++ b/keyboards/helix/rev2/split_util.c
@@ -11,7 +11,7 @@
 #ifdef USE_MATRIX_I2C
 #  include "i2c.h"
 #else
-#  include "serial.h"
+#  include "split_scomm.h"
 #endif

 volatile bool isLeftHand = true;
--- a/keyboards/helix/rules.mk
+++ b/keyboards/helix/rules.mk
@@ -1,6 +1,9 @@
-SRC += i2c.c \
-	   serial.c \
-	   ssd1306.c
+SRC += i2c.c
+SRC += serial.c
+SRC += ssd1306.c
+
+# if firmware size over limit, try this option
+# CFLAGS += -flto

 # MCU name
 #MCU = at90usb1287
--- a/keyboards/helix/serial.c
+++ b/keyboards/helix/serial.c
@@ -9,40 +9,85 @@
 #include <avr/io.h>
 #include <avr/interrupt.h>
 #include <util/delay.h>
+#include <stddef.h>
 #include <stdbool.h>
 #include "serial.h"
+//#include <pro_micro.h>

 #ifdef USE_SERIAL

+#ifndef SERIAL_USE_MULTI_TRANSACTION
+/* --- USE Simple API (OLD API, compatible with let's split serial.c) */
+  #if SERIAL_SLAVE_BUFFER_LENGTH > 0
+  uint8_t volatile serial_slave_buffer[SERIAL_SLAVE_BUFFER_LENGTH] = {0};
+  #endif
+  #if SERIAL_MASTER_BUFFER_LENGTH > 0
+  uint8_t volatile serial_master_buffer[SERIAL_MASTER_BUFFER_LENGTH] = {0};
+  #endif
+  uint8_t volatile status0 = 0;
+
+SSTD_t transactions[] = {
+    { (uint8_t *)&status0,
+  #if SERIAL_MASTER_BUFFER_LENGTH > 0
+      sizeof(serial_master_buffer), (uint8_t *)serial_master_buffer,
+  #else
+      0, (uint8_t *)NULL,
+  #endif
+  #if SERIAL_SLAVE_BUFFER_LENGTH > 0
+      sizeof(serial_slave_buffer), (uint8_t *)serial_slave_buffer
+  #else
+      0, (uint8_t *)NULL,
+  #endif
+  }
+};
+
+void serial_master_init(void)
+{ soft_serial_initiator_init(transactions); }
+
+void serial_slave_init(void)
+{ soft_serial_target_init(transactions); }
+
+// 0 => no error
+// 1 => slave did not respond
+// 2 => checksum error
+int serial_update_buffers()
+{ return soft_serial_transaction(); }
+
+#endif // Simple API (OLD API, compatible with let's split serial.c)
+
+#define ALWAYS_INLINE __attribute__((always_inline))
+#define NO_INLINE __attribute__((noinline))
 #define _delay_sub_us(x)    __builtin_avr_delay_cycles(x)

 // Serial pulse period in microseconds.
+#define TID_SEND_ADJUST 14
+
 #define SELECT_SERIAL_SPEED 1
 #if SELECT_SERIAL_SPEED == 0
  // Very High speed
  #define SERIAL_DELAY 4             // micro sec
-  #define READ_WRITE_START_ADJUST 30 // cycles
-  #define READ_WRITE_WIDTH_ADJUST 10 // cycles
+  #define READ_WRITE_START_ADJUST 33 // cycles
+  #define READ_WRITE_WIDTH_ADJUST 3 // cycles
 #elif SELECT_SERIAL_SPEED == 1
  // High speed
  #define SERIAL_DELAY 6             // micro sec
-  #define READ_WRITE_START_ADJUST 23 // cycles
-  #define READ_WRITE_WIDTH_ADJUST 10 // cycles
+  #define READ_WRITE_START_ADJUST 30 // cycles
+  #define READ_WRITE_WIDTH_ADJUST 3 // cycles
 #elif SELECT_SERIAL_SPEED == 2
  // Middle speed
  #define SERIAL_DELAY 12            // micro sec
-  #define READ_WRITE_START_ADJUST 25 // cycles
-  #define READ_WRITE_WIDTH_ADJUST 10 // cycles
+  #define READ_WRITE_START_ADJUST 30 // cycles
+  #define READ_WRITE_WIDTH_ADJUST 3 // cycles
 #elif SELECT_SERIAL_SPEED == 3
  // Low speed
  #define SERIAL_DELAY 24            // micro sec
-  #define READ_WRITE_START_ADJUST 25 // cycles
-  #define READ_WRITE_WIDTH_ADJUST 10 // cycles
+  #define READ_WRITE_START_ADJUST 30 // cycles
+  #define READ_WRITE_WIDTH_ADJUST 3 // cycles
 #elif SELECT_SERIAL_SPEED == 4
  // Very Low speed
  #define SERIAL_DELAY 50            // micro sec
-  #define READ_WRITE_START_ADJUST 25 // cycles
-  #define READ_WRITE_WIDTH_ADJUST 10 // cycles
+  #define READ_WRITE_START_ADJUST 30 // cycles
+  #define READ_WRITE_WIDTH_ADJUST 3 // cycles
 #else
 #error Illegal Serial Speed
 #endif
@@ -51,14 +96,15 @@
 #define SERIAL_DELAY_HALF1 (SERIAL_DELAY/2)
 #define SERIAL_DELAY_HALF2 (SERIAL_DELAY - SERIAL_DELAY/2)

-#define SLAVE_INT_WIDTH 1
-#define SLAVE_INT_RESPONSE_TIME SERIAL_DELAY
+#define SLAVE_INT_WIDTH_US 1
+#ifndef SERIAL_USE_MULTI_TRANSACTION
+  #define SLAVE_INT_RESPONSE_TIME SERIAL_DELAY
+#else
+  #define SLAVE_INT_ACK_WIDTH_UNIT 2
+  #define SLAVE_INT_ACK_WIDTH 4
+#endif

-uint8_t volatile serial_slave_buffer[SERIAL_SLAVE_BUFFER_LENGTH] = {0};
-uint8_t volatile serial_master_buffer[SERIAL_MASTER_BUFFER_LENGTH] = {0};
-
-#define SLAVE_DATA_CORRUPT (1<<0)
-volatile uint8_t status = 0;
+static SSTD_t *Transaction_table = NULL;

 inline static
 void serial_delay(void) {
@@ -75,12 +121,14 @@ void serial_delay_half2(void) {
  _delay_us(SERIAL_DELAY_HALF2);
 }

+inline static void serial_output(void) ALWAYS_INLINE;
 inline static
 void serial_output(void) {
  SERIAL_PIN_DDR |= SERIAL_PIN_MASK;
 }

 // make the serial pin an input with pull-up resistor
+inline static void serial_input_with_pullup(void) ALWAYS_INLINE;
 inline static
 void serial_input_with_pullup(void) {
  SERIAL_PIN_DDR  &= ~SERIAL_PIN_MASK;
@@ -92,50 +140,58 @@ uint8_t serial_read_pin(void) {
  return !!(SERIAL_PIN_INPUT & SERIAL_PIN_MASK);
 }

+inline static void serial_low(void) ALWAYS_INLINE;
 inline static
 void serial_low(void) {
  SERIAL_PIN_PORT &= ~SERIAL_PIN_MASK;
 }

+inline static void serial_high(void) ALWAYS_INLINE;
 inline static
 void serial_high(void) {
  SERIAL_PIN_PORT |= SERIAL_PIN_MASK;
 }

-void serial_master_init(void) {
-  serial_output();
-  serial_high();
+void soft_serial_initiator_init(SSTD_t *sstd_table)
+{
+    Transaction_table = sstd_table;
+    serial_output();
+    serial_high();
 }

-void serial_slave_init(void) {
-  serial_input_with_pullup();
+void soft_serial_target_init(SSTD_t *sstd_table)
+{
+    Transaction_table = sstd_table;
+    serial_input_with_pullup();

 #if SERIAL_PIN_MASK == _BV(PD0)
-  // Enable INT0
-  EIMSK |= _BV(INT0);
-  // Trigger on falling edge of INT0
-  EICRA &= ~(_BV(ISC00) | _BV(ISC01));
+    // Enable INT0
+    EIMSK |= _BV(INT0);
+    // Trigger on falling edge of INT0
+    EICRA &= ~(_BV(ISC00) | _BV(ISC01));
 #elif SERIAL_PIN_MASK == _BV(PD2)
-  // Enable INT2
-  EIMSK |= _BV(INT2);
-  // Trigger on falling edge of INT2
-  EICRA &= ~(_BV(ISC20) | _BV(ISC21));
+    // Enable INT2
+    EIMSK |= _BV(INT2);
+    // Trigger on falling edge of INT2
+    EICRA &= ~(_BV(ISC20) | _BV(ISC21));
 #else
 #error unknown SERIAL_PIN_MASK value
 #endif
 }

 // Used by the sender to synchronize timing with the reciver.
+static void sync_recv(void) NO_INLINE;
 static
 void sync_recv(void) {
-  for (int i = 0; i < SERIAL_DELAY*5 && serial_read_pin(); i++ ) {
+  for (uint8_t i = 0; i < SERIAL_DELAY*5 && serial_read_pin(); i++ ) {
  }
-  // This shouldn't hang if the slave disconnects because the
-  // serial line will float to high if the slave does disconnect.
+  // This shouldn't hang if the target disconnects because the
+  // serial line will float to high if the target does disconnect.
  while (!serial_read_pin());
 }

 // Used by the reciver to send a synchronization signal to the sender.
+static void sync_send(void)NO_INLINE;
 static
 void sync_send(void) {
  serial_low();
@@ -144,152 +200,245 @@ void sync_send(void) {
 }

 // Reads a byte from the serial line
-static
-uint8_t serial_read_byte(void) {
-  uint8_t byte = 0;
+static uint8_t serial_read_chunk(uint8_t *pterrcount, uint8_t bit) NO_INLINE;
+static uint8_t serial_read_chunk(uint8_t *pterrcount, uint8_t bit) {
+    uint8_t byte, i, p, pb;
+
  _delay_sub_us(READ_WRITE_START_ADJUST);
-  for ( uint8_t i = 0; i < 8; ++i) {
-    serial_delay_half1();   // read the middle of pulses
-    byte = (byte << 1) | serial_read_pin();
-    _delay_sub_us(READ_WRITE_WIDTH_ADJUST);
-    serial_delay_half2();
+  for( i = 0, byte = 0, p = 0; i < bit; i++ ) {
+      serial_delay_half1();   // read the middle of pulses
+      if( serial_read_pin() ) {
+	  byte = (byte << 1) | 1; p ^= 1;
+      } else {
+	  byte = (byte << 1) | 0; p ^= 0;
+      }
+      _delay_sub_us(READ_WRITE_WIDTH_ADJUST);
+      serial_delay_half2();
  }
+  /* recive parity bit */
+  serial_delay_half1();   // read the middle of pulses
+  pb = serial_read_pin();
+  _delay_sub_us(READ_WRITE_WIDTH_ADJUST);
+  serial_delay_half2();
+
+  *pterrcount += (p != pb)? 1 : 0;
+
  return byte;
 }

 // Sends a byte with MSB ordering
-static
-void serial_write_byte(uint8_t data) {
-  uint8_t b = 1<<7;
-  while( b ) {
-    if(data & b) {
-      serial_high();
-    } else {
-      serial_low();
+void serial_write_chunk(uint8_t data, uint8_t bit) NO_INLINE;
+void serial_write_chunk(uint8_t data, uint8_t bit) {
+    uint8_t b, p;
+    for( p = 0, b = 1<<(bit-1); b ; b >>= 1) {
+	if(data & b) {
+	    serial_high(); p ^= 1;
+	} else {
+	    serial_low();  p ^= 0;
+	}
+	serial_delay();
    }
-    b >>= 1;
+    /* send parity bit */
+    if(p & 1) { serial_high(); }
+    else      { serial_low(); }
    serial_delay();
-  }
-  serial_low(); // sync_send() / senc_recv() need raise edge
+
+    serial_low(); // sync_send() / senc_recv() need raise edge
 }

-// interrupt handle to be used by the slave device
-ISR(SERIAL_PIN_INTERRUPT) {
-  serial_output();
-
-  // slave send phase
-  uint8_t checksum = 0;
-  for (int i = 0; i < SERIAL_SLAVE_BUFFER_LENGTH; ++i) {
+static void serial_send_packet(uint8_t *buffer, uint8_t size) NO_INLINE;
+static
+void serial_send_packet(uint8_t *buffer, uint8_t size) {
+  for (uint8_t i = 0; i < size; ++i) {
+    uint8_t data;
+    data = buffer[i];
    sync_send();
-    serial_write_byte(serial_slave_buffer[i]);
-    checksum += serial_slave_buffer[i];
+    serial_write_chunk(data,8);
  }
-  sync_send();
-  serial_write_byte(checksum);
+}

-  // slave switch to input
-  sync_send(); //0
-  serial_delay_half1(); //1
-  serial_low();         //2
-  serial_input_with_pullup(); //2
-  serial_delay_half1(); //3
-
-  // slave recive phase
-  uint8_t checksum_computed = 0;
-  for (int i = 0; i < SERIAL_MASTER_BUFFER_LENGTH; ++i) {
+static uint8_t serial_recive_packet(uint8_t *buffer, uint8_t size) NO_INLINE;
+static
+uint8_t serial_recive_packet(uint8_t *buffer, uint8_t size) {
+  uint8_t pecount = 0;
+  for (uint8_t i = 0; i < size; ++i) {
+    uint8_t data;
    sync_recv();
-    serial_master_buffer[i] = serial_read_byte();
-    checksum_computed += serial_master_buffer[i];
+    data = serial_read_chunk(&pecount, 8);
+    buffer[i] = data;
  }
+  return pecount == 0;
+}
+
+inline static
+void change_sender2reciver(void) {
+    sync_send();          //0
+    serial_delay_half1(); //1
+    serial_low();         //2
+    serial_input_with_pullup(); //2
+    serial_delay_half1(); //3
+}
+
+inline static
+void change_reciver2sender(void) {
+    sync_recv();     //0
+    serial_delay();  //1
+    serial_low();    //3
+    serial_output(); //3
+    serial_delay_half1(); //4
+}
+
+// interrupt handle to be used by the target device
+ISR(SERIAL_PIN_INTERRUPT) {
+
+#ifndef SERIAL_USE_MULTI_TRANSACTION
+  serial_low();
+  serial_output();
+  SSTD_t *trans = Transaction_table;
+#else
+  // recive transaction table index
+  uint8_t tid;
+  uint8_t pecount = 0;
  sync_recv();
-  uint8_t checksum_received = serial_read_byte();
+  tid = serial_read_chunk(&pecount,4);
+  if(pecount> 0)
+      return;
+  serial_delay_half1();

-  if ( checksum_computed != checksum_received ) {
-    status |= SLAVE_DATA_CORRUPT;
+  serial_high(); // response step1 low->high
+  serial_output();
+  _delay_sub_us(SLAVE_INT_ACK_WIDTH_UNIT*SLAVE_INT_ACK_WIDTH);
+  SSTD_t *trans = &Transaction_table[tid];
+  serial_low(); // response step2 ack high->low
+#endif
+
+  // target send phase
+  if( trans->target2initiator_buffer_size > 0 )
+      serial_send_packet((uint8_t *)trans->target2initiator_buffer,
+			 trans->target2initiator_buffer_size);
+  // target switch to input
+  change_sender2reciver();
+
+  // target recive phase
+  if( trans->initiator2target_buffer_size > 0 ) {
+      if (serial_recive_packet((uint8_t *)trans->initiator2target_buffer,
+			       trans->initiator2target_buffer_size) ) {
+	  *trans->status = TRANSACTION_ACCEPTED;
+      } else {
+	  *trans->status = TRANSACTION_DATA_ERROR;
+      }
  } else {
-    status &= ~SLAVE_DATA_CORRUPT;
+      *trans->status = TRANSACTION_ACCEPTED;
  }

-  sync_recv(); //weit master output to high
+  sync_recv(); //weit initiator output to high
 }

-inline
-bool serial_slave_DATA_CORRUPT(void) {
-  return status & SLAVE_DATA_CORRUPT;
-}
-
-// Copies the serial_slave_buffer to the master and sends the
-// serial_master_buffer to the slave.
+/////////
+//  start transaction by initiator
+//
+// int  soft_serial_transaction(int sstd_index)
 //
 // Returns:
-// 0 => no error
-// 1 => slave did not respond
-// 2 => checksum error
-int serial_update_buffers(void) {
-  // this code is very time dependent, so we need to disable interrupts
+//    TRANSACTION_END
+//    TRANSACTION_NO_RESPONSE
+//    TRANSACTION_DATA_ERROR
+// this code is very time dependent, so we need to disable interrupts
+#ifndef SERIAL_USE_MULTI_TRANSACTION
+int  soft_serial_transaction(void) {
+  SSTD_t *trans = Transaction_table;
+#else
+int  soft_serial_transaction(int sstd_index) {
+  SSTD_t *trans = &Transaction_table[sstd_index];
+#endif
  cli();

-  // signal to the slave that we want to start a transaction
+  // signal to the target that we want to start a transaction
  serial_output();
  serial_low();
-  _delay_us(SLAVE_INT_WIDTH);
+  _delay_us(SLAVE_INT_WIDTH_US);

-  // wait for the slaves response
+#ifndef SERIAL_USE_MULTI_TRANSACTION
+  // wait for the target response
  serial_input_with_pullup();
  _delay_us(SLAVE_INT_RESPONSE_TIME);

-  // check if the slave is present
+  // check if the target is present
  if (serial_read_pin()) {
-    // slave failed to pull the line low, assume not present
+    // target failed to pull the line low, assume not present
    serial_output();
    serial_high();
+    *trans->status = TRANSACTION_NO_RESPONSE;
    sei();
-    return 1;
+    return TRANSACTION_NO_RESPONSE;
  }

-  // master recive phase
-  // if the slave is present syncronize with it
-
-  uint8_t checksum_computed = 0;
-  // receive data from the slave
-  for (int i = 0; i < SERIAL_SLAVE_BUFFER_LENGTH; ++i) {
-    sync_recv();
-    serial_slave_buffer[i] = serial_read_byte();
-    checksum_computed += serial_slave_buffer[i];
-  }
-  sync_recv();
-  uint8_t checksum_received = serial_read_byte();
-
-  if (checksum_computed != checksum_received) {
-    serial_output();
-    serial_high();
-    sei();
-    return 2;
-  }
-
-  // master switch to output
-  sync_recv(); //0
-  serial_delay();  //1
-  serial_low();    //3
-  serial_output(); // 3
-  serial_delay_half1(); //4
-
-  // master send phase
-  uint8_t checksum = 0;
-
-  for (int i = 0; i < SERIAL_MASTER_BUFFER_LENGTH; ++i) {
-    sync_send();
-    serial_write_byte(serial_master_buffer[i]);
-    checksum += serial_master_buffer[i];
-  }
+#else
+  // send transaction table index
  sync_send();
-  serial_write_byte(checksum);
+  _delay_sub_us(TID_SEND_ADJUST);
+  serial_write_chunk(sstd_index, 4);
+  serial_delay_half1();
+
+  // wait for the target response (step1 low->high)
+  serial_input_with_pullup();
+  while( !serial_read_pin() ) {
+      _delay_sub_us(2);
+  }
+
+  // check if the target is present (step2 high->low)
+  for( int i = 0; serial_read_pin(); i++ ) {
+      if (i > SLAVE_INT_ACK_WIDTH + 1) {
+	  // slave failed to pull the line low, assume not present
+	  serial_output();
+	  serial_high();
+	  *trans->status = TRANSACTION_NO_RESPONSE;
+	  sei();
+	  return TRANSACTION_NO_RESPONSE;
+      }
+      _delay_sub_us(SLAVE_INT_ACK_WIDTH_UNIT);
+  }
+#endif
+
+  // initiator recive phase
+  // if the target is present syncronize with it
+  if( trans->target2initiator_buffer_size > 0 ) {
+      if (!serial_recive_packet((uint8_t *)trans->target2initiator_buffer,
+				trans->target2initiator_buffer_size) ) {
+	  serial_output();
+	  serial_high();
+	  *trans->status = TRANSACTION_DATA_ERROR;
+	  sei();
+	  return TRANSACTION_DATA_ERROR;
+      }
+   }
+
+  // initiator switch to output
+  change_reciver2sender();
+
+  // initiator send phase
+  if( trans->initiator2target_buffer_size > 0 ) {
+      serial_send_packet((uint8_t *)trans->initiator2target_buffer,
+			 trans->initiator2target_buffer_size);
+  }

  // always, release the line when not in use
  sync_send();

+  *trans->status = TRANSACTION_END;
  sei();
-  return 0;
+  return TRANSACTION_END;
 }

+#ifdef SERIAL_USE_MULTI_TRANSACTION
+int soft_serial_get_and_clean_status(int sstd_index) {
+    SSTD_t *trans = &Transaction_table[sstd_index];
+    cli();
+    int retval = *trans->status;
+    *trans->status = 0;;
+    sei();
+    return retval;
+}
+#endif
+
 #endif
--- a/keyboards/helix/serial.h
+++ b/keyboards/helix/serial.h
@@ -3,25 +3,78 @@

 #include <stdbool.h>

-// ////////////////////////////////////////////
+// /////////////////////////////////////////////////////////////////
 // Need Soft Serial defines in serial_config.h
-// ////////////////////////////////////////////
+// /////////////////////////////////////////////////////////////////
 // ex.
 //  #define SERIAL_PIN_DDR DDRD
 //  #define SERIAL_PIN_PORT PORTD
 //  #define SERIAL_PIN_INPUT PIND
 //  #define SERIAL_PIN_MASK _BV(PD?)   ?=0,2
 //  #define SERIAL_PIN_INTERRUPT INT?_vect  ?=0,2
+//
+// //// USE Simple API (OLD API, compatible with let's split serial.c)
+// ex.
 //  #define SERIAL_SLAVE_BUFFER_LENGTH MATRIX_ROWS/2
-//  #define SERIAL_MASTER_BUFFER_LENGTH MATRIX_ROWS/2
+//  #define SERIAL_MASTER_BUFFER_LENGTH 1
+//
+// //// USE flexible API (using multi-type transaction function)
+//  #define SERIAL_USE_MULTI_TRANSACTION
+//
+// /////////////////////////////////////////////////////////////////

-// Buffers for master - slave communication
+
+#ifndef SERIAL_USE_MULTI_TRANSACTION
+/* --- USE Simple API (OLD API, compatible with let's split serial.c) */
+#if SERIAL_SLAVE_BUFFER_LENGTH > 0
 extern volatile uint8_t serial_slave_buffer[SERIAL_SLAVE_BUFFER_LENGTH];
+#endif
+#if SERIAL_MASTER_BUFFER_LENGTH > 0
 extern volatile uint8_t serial_master_buffer[SERIAL_MASTER_BUFFER_LENGTH];
+#endif

 void serial_master_init(void);
 void serial_slave_init(void);
 int serial_update_buffers(void);
-bool serial_slave_data_corrupt(void);
+
+#endif // USE Simple API
+
+// Soft Serial Transaction Descriptor
+typedef struct _SSTD_t  {
+    uint8_t *status;
+    uint8_t initiator2target_buffer_size;
+    uint8_t *initiator2target_buffer;
+    uint8_t target2initiator_buffer_size;
+    uint8_t *target2initiator_buffer;
+} SSTD_t;
+
+// initiator is transaction start side
+void soft_serial_initiator_init(SSTD_t *sstd_table);
+// target is interrupt accept side
+void soft_serial_target_init(SSTD_t *sstd_table);
+
+// initiator resullt
+#define TRANSACTION_END 0
+#define TRANSACTION_NO_RESPONSE 0x1
+#define TRANSACTION_DATA_ERROR  0x2
+#ifndef SERIAL_USE_MULTI_TRANSACTION
+int  soft_serial_transaction(void);
+#else
+int  soft_serial_transaction(int sstd_index);
+#endif
+
+// target status
+// *SSTD_t.status has
+//   initiator:
+//       TRANSACTION_END
+//    or TRANSACTION_NO_RESPONSE
+//    or TRANSACTION_DATA_ERROR
+//   target:
+//       TRANSACTION_DATA_ERROR
+//    or TRANSACTION_ACCEPTED
+#define TRANSACTION_ACCEPTED 0x4
+#ifdef SERIAL_USE_MULTI_TRANSACTION
+int  soft_serial_get_and_clean_status(int sstd_index);
+#endif

 #endif /* SOFT_SERIAL_H */
--- a/keyboards/kbd6x/rules.mk
+++ b/keyboards/kbd6x/rules.mk
@@ -52,7 +52,7 @@ OPT_DEFS += -DBOOTLOADER_SIZE=4096
 #   change yes to no to disable
 #
 BOOTMAGIC_ENABLE = no      # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
+MOUSEKEY_ENABLE = no       # Mouse keys(+4700)
 EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
 CONSOLE_ENABLE = yes        # Console for debug(+400)
 COMMAND_ENABLE = yes        # Commands for debug and configuration
--- a/keyboards/kbd75/keymaps/spacemanspiff/keymap.c
+++ b/keyboards/kbd75/keymaps/spacemanspiff/keymap.c
@@ -0,0 +1,50 @@
+#include QMK_KEYBOARD_H
+
+// Each layer gets a name for readability, which is then used in the keymap matrix below.
+#define _BL 0 // Base Layer
+#define _FN 1 // Function Layer
+#define _CL 2 // Control+ Layer
+
+// Add names for complex momentary keys, to keep the keymap matrix aligned better.
+#define CTL_ESC MT(MOD_LCTL,KC_ESC)
+#define GUI_ENT MT(MOD_RGUI, KC_ENT)
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+  [_BL] = LAYOUT(
+    KC_ESC,   KC_F1,    KC_F2,    KC_F3,    KC_F4,    KC_F5,    KC_F6,    KC_F7,    KC_F8,    KC_F9,    KC_F10,   KC_F11,   KC_F12,   KC_F13,   MO(_FN),  KC_DEL,
+    KC_GRV,   KC_1,     KC_2,     KC_3,     KC_4,     KC_5,     KC_6,     KC_7,     KC_8,     KC_9,     KC_0,     KC_MINS,  KC_EQL,   KC_DEL,   KC_BSPC,  KC_HOME,
+    KC_TAB,   KC_Q,     KC_W,     KC_E,     KC_R,     KC_T,     KC_Y,     KC_U,     KC_I,     KC_O,     KC_P,     KC_LBRC,  KC_RBRC,  KC_BSLS,            KC_PGUP,
+    CTL_ESC,  KC_A,     KC_S,     KC_D,     KC_F,     KC_G,     KC_H,     KC_J,     KC_K,     KC_L,     KC_SCLN,  KC_QUOT,                      KC_ENT,   KC_PGDN,
+    KC_LSFT,  MO(_FN),  KC_Z,     KC_X,     KC_C,     KC_V,     KC_B,     KC_N,     KC_M,     KC_COMM,  KC_DOT,   KC_SLSH,  KC_RSFT,            KC_UP,    KC_END,
+    MO(_CL),  KC_LALT,  KC_LGUI,                      KC_SPC,   KC_SPC,   KC_SPC,                       GUI_ENT,  KC_RALT,  KC_RCTL,  KC_LEFT,  KC_DOWN,  KC_RGHT
+  ),
+
+  [_FN] = LAYOUT(
+    RESET  ,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,
+    _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  RESET,    _______,
+    _______,  RGB_TOG,  RGB_MOD,  RGB_HUI,  RGB_HUD,  RGB_SAI,  RGB_SAD,  RGB_VAI,  RGB_VAD,  _______,  _______,  _______,  _______,  _______,            _______,
+    _______,  KC_VOLD,  KC_VOLU,  KC_MUTE,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,                      _______,  _______,
+    _______,  _______,  _______,  _______,  BL_DEC,   BL_TOGG,  BL_INC,   BL_STEP,  _______,  _______,  _______,  _______,  _______,            _______,  _______,
+    _______,  _______,  _______,                      _______,  _______,  _______,                      _______,  _______,  _______,  _______,  _______,  _______
+  ),
+
+  [_CL] = LAYOUT(
+    LCTL(KC_ESC),   LCTL(KC_F1),    LCTL(KC_F2),    LCTL(KC_F3),  LCTL(KC_F4),  LCTL(KC_F5),  LCTL(KC_F6),  LCTL(KC_F7),  LCTL(KC_F8), LCTL(KC_F9),    LCTL(KC_F10),   LCTL(KC_F11),   LCTL(KC_F12),   LCTL(KC_PSCR),  _______,        LCTL(KC_DEL),
+    KC_ESC,         LCTL(KC_1),     LCTL(KC_2),     LCTL(KC_3),   LCTL(KC_4),   LCTL(KC_5),   LCTL(KC_6),   LCTL(KC_7),   LCTL(KC_8),  LCTL(KC_9),     LCTL(KC_0),     LCTL(KC_MINS),  LCTL(KC_EQL),   LCTL(KC_DEL),   KC_DEL,         LCTL(KC_HOME),
+    LCTL(KC_TAB),   LCTL(KC_Q),     LCTL(KC_W),     LCTL(KC_E),   LCTL(KC_R),   LCTL(KC_T),   LCTL(KC_Y),   LCTL(KC_U),   LCTL(KC_I),  LCTL(KC_O),     KC_PGUP,        LCTL(KC_LBRC),  LCTL(KC_RBRC),  LCTL(KC_BSLS),                  LCTL(KC_PGUP),
+    CTL_ESC,        LCTL(KC_A),     LCTL(KC_S),     LCTL(KC_D),   LCTL(KC_F),   LCTL(KC_G),   KC_LEFT,      KC_DOWN,      KC_UP,       KC_RGHT,        LCTL(KC_SCLN),  LCTL(KC_QUOT),                                  LCTL(KC_ENT),   LCTL(KC_PGDN),
+    LCTL(KC_LSFT),  _______,        LCTL(KC_Z),     LCTL(KC_X),   LCTL(KC_C),   LCTL(KC_V),   LCTL(KC_B),   KC_PGDN,      LCTL(KC_M),  LCTL(KC_COMM),  LCTL(KC_DOT),   LCTL(KC_SLSH),  LCTL(KC_RSFT),                  LCTL(KC_UP),    LCTL(KC_END),
+    _______,        LCTL(KC_LALT),  LCTL(KC_LGUI),                              LCTL(KC_SPC), LCTL(KC_SPC), LCTL(KC_SPC),                              LCTL(KC_RGUI),  LCTL(KC_RALT),  LCTL(KC_RCTL),  LCTL(KC_LEFT),  LCTL(KC_DOWN),  LCTL(KC_RGHT)
+  ),
+
+};
+
+void led_set_user(uint8_t usb_led) {
+    if (usb_led & (1 << USB_LED_CAPS_LOCK)) {
+        DDRB |= (1 << 2); PORTB &= ~(1 << 2);
+    } else {
+        DDRB &= ~(1 << 2); PORTB &= ~(1 << 2);
+    }
+}
+
--- a/keyboards/kbd75/keymaps/spacemanspiff/readme.md
+++ b/keyboards/kbd75/keymaps/spacemanspiff/readme.md
@@ -0,0 +1,35 @@
+# Spaceman Spiff Layout for KBD75
+
+![Keyboard Layout](https://i.imgur.com/tQLYDvu.png)
+
+<!-- http://www.keyboard-layout-editor.com/#/gists/c1e8a15c68e4c52eed84653f21ae2d29 -->
+
+Designed specifically to make switching back-n-forth with the Apple's MacBook Pro keyboard intuitive. Has a slight tendency toward readline/vim keybindings.
+
+Caps locks becomes an `Esc` when pressed alone, or a `Ctrl` when pressed with another key.
+
+# Base Layer
+
+As simalar to the Apple keyboard as possible. Notiable exception is `Caps Lock`:
+- `Esc` when pressed alone
+- `Ctrl` when pressed with another key
+
+# Control+ Layer
+
+Left Ctrl key switches to the "Control+ Layer". This layer mostly acts like a control key in most cases, with a few exceptions:
+
+- `Ctl+` + `hjkl` are vim-style motion keys
+- `Ctl+` + `p` and `Ctl+` + `n` are page up and down
+- `Ctl+` + `Backspace` is forward delete
+
+# Fn Layer
+
+Audio Controls:
+- `Fn` + `a` Volume Down
+- `Fn` + `s` Volume Up
+- `Fn` + `d` Mute
+
+To flash this layout you need to press `Fn+Backspace`
+
+
+
--- a/keyboards/planck/keymaps/ishtob/config.h
+++ b/keyboards/planck/keymaps/ishtob/config.h
@@ -1,60 +1,36 @@
-#ifndef CONFIG_USER_H
-#define CONFIG_USER_H

-#include "../../config.h"
+#ifndef USERSPACE_CONFIG_H
+#define USERSPACE_CONFIG_H

-#define LEADER_TIMEOUT 300
-//#define BACKLIGHT_BREATHING
-#define PREVENT_STUCK_MODIFIERS

+#ifdef AUDIO_ENABLE
+
+// #define STARTUP_SONG SONG(E1M1_DOOM)
+// #define GOODBYE_SONG  SONG(SONIC_RING)
+/* #define DEFAULT_LAYER_SONGS { SONG(QWERTY_SOUND), \
+                                  SONG(COLEMAK_SOUND), \
+                                  SONG(DVORAK_SOUND), \
+                                }
+*/
 //audio clicky
    #define AUDIO_CLICKY
  // to enable clicky on startup
  //#define AUDIO_CLICKY_ON
 	#define AUDIO_CLICKY_FREQ_RANDOMNESS 1.0f

-/* ws2812 RGB LED
-#define RGB_DI_PIN B5
-#define RGBLIGHT_ANIMATIONS
-#define RGBLED_NUM 8     // Number of LEDs
-#define RGBLIGHT_HUE_STEP 10
-#define RGBLIGHT_SAT_STEP 17
-*/
-#undef PLANCK_MIT_LAYOUT
+
+#endif
+
+#define FORCE_NKRO
+
+#define LEADER_TIMEOUT 300
+#define PREVENT_STUCK_MODIFIERS

 #undef DEBOUNCE
 #define DEBOUNCE 0

-//rgb-reactive
-#define RGB_MATRIX_KEYPRESSES
-#define EECONFIG_RGB_MATRIX (uint32_t *)16
-
 //skip usb startup check
 //#define NO_USB_STARTUP_CHECK


-/*
- * MIDI options
- */
-
-/* Prevent use of disabled MIDI features in the keymap */
-//#define MIDI_ENABLE_STRICT 1
-
-/* enable basic MIDI features:
-   - MIDI notes can be sent when in Music mode is on
-*/
-#define MIDI_BASIC
-
-/* enable advanced MIDI features:
-   - MIDI notes can be added to the keymap
-   - Octave shift and transpose
-   - Virtual sustain, portamento, and modulation wheel
-   - etc.
-*/
-//#define MIDI_ADVANCED
-
-/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
-//#define MIDI_TONE_KEYCODE_OCTAVES 2
-
-
 #endif
--- a/keyboards/planck/keymaps/ishtob/keymap.c
+++ b/keyboards/planck/keymaps/ishtob/keymap.c
@@ -1,7 +1,6 @@
 // This is the canonical layout file for the Quantum project. If you want to add another keyboard,
 // this is the style you want to emulate.

-#pragma message "You may need to add LAYOUT_planck_grid to your keymap layers - see default for an example"
 #include "planck.h"
 #include "action_layer.h"
 // #include "dynamic_macro.h"
@@ -9,65 +8,10 @@
  #include "audio.h"
 #endif
 #include "eeconfig.h"
-
-//Macro definition
-#if (__has_include("macros_private.h") && !defined(SECRETS))
-#include "macros_private.h"
-#else
-#include "macros_public.h"
-#endif
+#include "ishtob.h"

 extern keymap_config_t keymap_config;

-// Each layer gets a name for readability, which is then used in the keymap matrix below.
-// The underscores don't mean anything - you can have a layer called STUFF or any other name.
-// Layer names don't all need to be of the same length, obviously, and you can also skip them
-// entirely and just use numbers.
-#define _QWERTY 0
-#define _COLEMAK 1
-#define _DVORAK 2
-#define _LOWER 3
-#define _RAISE 4
-#define _PLOVER 5
-#define _FNLAYER 6
-#define _NUMLAY 7
-#define _MOUSECURSOR 8
-#define _ADJUST 16
-
-enum planck_keycodes {
-  QWERTY = SAFE_RANGE,
-  COLEMAK,
-  DVORAK,
-  PLOVER,
-  LOWER,
-  RAISE,
-  BACKLIT,
-  EXT_PLV,
-  DFU,
-};
-
-// Fillers to make layering more clear
-#define _______ KC_TRNS
-#define XXXXXXX KC_NO
-// Custom macros
-#define CTL_ESC     CTL_T(KC_ESC)               // Tap for Esc, hold for Ctrl
-#define CTL_TTAB    CTL_T(KC_TAB)               // Tap for Esc, hold for Ctrl
-#define CTL_ENT     CTL_T(KC_ENT)               // Tap for Enter, hold for Ctrl
-#define SFT_ENT     SFT_T(KC_ENT)               // Tap for Enter, hold for Shift
-// Requires KC_TRNS/_______ for the trigger key in the destination layer
-#define LT_FN(kc)   LT(_FNLAYER, kc)            // L-ayer T-ap Function Layer
-#define LT_MC(kc)   LT(_MOUSECURSOR, kc)        // L-ayer T-ap M-ouse C-ursor
-#define LT_RAI(kc)  LT(_RAISE, kc)              // L-ayer T-ap to Raise
-#define TG_NUMLAY   TG(_NUMLAY)                 //Toggle for layer _NUMLAY
-#define P_CITRIX    M(KC_CITRIX)                // My login macros
-#define P_MPASS     M(KC_MPASS)
-#define P_META      M(KC_META)
-#define O_DAYRN     M(KC_DAYRN)                 // My work macros
-#define O_AUTODC    M(KC_AUTODC)
-#define O_RTQ6H     M(KC_RTQ6H)
-#define M_EMAIL     M(KC_EMAIL)                 // My personal email
-#define M_EMAIL2    M(KC_EMAIL2)                // My work email
-
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 /* Qwerty
 ,-----------------------------------------------------------------------------------.
@@ -86,7 +30,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
  KC_LSFT,       KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, LT_RAI(KC_MINS),
  KC_ESC,        KC_CAPS, KC_LGUI, KC_LALT, LOWER,   KC_SPC,  KC_SPC,  RAISE, KC_RALT, TG_NUMLAY, KC_APP,  KC_DEL
 ),
-
+ 
 /* Colemak
 * ,-----------------------------------------------------------------------------------.
 * | Tab  |   Q  |   W  |   F  |   P  |   G  |   J  |   L  |   U  |   Y  |   ;  | Bksp |
@@ -104,7 +48,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
  KC_LSFT,   KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_K,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, LT_RAI(KC_MINS),
  KC_ESC,    KC_CAPS, KC_LGUI, KC_LALT, LOWER,   KC_SPC,  KC_SPC,  RAISE, KC_RALT, TG_NUMLAY, KC_APP,  KC_DEL
 ),
-
+ 
 /* Dvorak
 * ,-----------------------------------------------------------------------------------.
 * | Tab  |   "  |   ,  |   .  |   P  |   Y  |   F  |   G  |   C  |   R  |   L  | Bksp |
@@ -122,7 +66,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
  KC_LSFT, KC_SCLN, KC_Q,    KC_J,    KC_K,    KC_X,    KC_B,    KC_M,    KC_W,    KC_V,    KC_Z, LT_RAI(KC_MINS),
  KC_ESC,  KC_CAPS, KC_LGUI, KC_LALT, LOWER,   KC_SPC,  KC_SPC,  RAISE, KC_RALT, TG_NUMLAY, KC_APP,  KC_DEL
 ),
-
+ 
 /* Lower
 * ,-----------------------------------------------------------------------------------.
 * |   1  |   2  |   3  |   4  |   5  |   6  |   7  |   8  |   9  |   0  |   ~  |  \   |
@@ -140,7 +84,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
  _______, KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,S(KC_NUHS),S(KC_NUBS),KC_LCBR, KC_RCBR, _______,
  _______, _______, _______, _______, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY
 ),
-
+ 
 /* Raise
 * ,-----------------------------------------------------------------------------------.
 * |   1  |   2  |   3  |   4  |   5  |   6  |   7  |   8  |   9  |   0  |   *  |  \   |
@@ -158,7 +102,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
  _______, KC_LEFT, KC_DOWN, KC_RIGHT,KC__MUTE, KC_VOLD, KC_1,    KC_2,    KC_3,    KC_UP, KC_SLSH,   _______,
  _______, _______, _______, _______, _______, KC_SPC,  KC_0,   _______,  KC_LEFT, KC_DOWN, KC_RIGHT,   KC_NLCK
 ),
-
+ 
 /* Plover layer (http://opensteno.org)
 * ,-----------------------------------------------------------------------------------.
 * |   #  |   #  |   #  |   #  |   #  |   #  |   #  |   #  |   #  |   #  |   #  |   #  |
@@ -170,14 +114,14 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 * | Exit |      |      |   A  |   O  |             |   E  |   U  |      |      |      |
 * `-----------------------------------------------------------------------------------'
 */
-
+ 
 [_PLOVER] = LAYOUT_planck_grid(
  KC_1,    KC_1,    KC_1,    KC_1,    KC_1,    KC_1,    KC_1,    KC_1,    KC_1,    KC_1,    KC_1,    KC_1   ,
  XXXXXXX, KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC,
  XXXXXXX, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT,
  EXT_PLV, XXXXXXX, XXXXXXX, KC_C,    KC_V,    XXXXXXX, XXXXXXX, KC_N,    KC_M,    XXXXXXX, XXXXXXX, XXXXXXX
 ),
-
+ 
 /* FN layer on Esc key
 * ,-----------------------------------------------------------------------------------.
 * |      |   !  |   @  |   #  |   $  |   %  |   ^  |   &  |   *  |   (  |   )  |   +  |
@@ -195,7 +139,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
  _______, KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,S(KC_NUHS),S(KC_NUBS),KC_LCBR, KC_RCBR, _______,
  _______, _______, _______, _______, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY
 ),
-
+ 
 /* Num Layer
 * ,-----------------------------------------------------------------------------------.
 * |      |   Q  |  Up  |   4  |      |      |   7  |   8  |   9  |   -  |   +  | Bksp |
@@ -213,7 +157,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
  _______, KC_Z,    KC_X,    KC_C,     KC_V,    XXXXXXX,  KC_P1,  KC_P2,  KC_P3,   KC_PDOT, KC_PSLS,  _______,
  _______, _______, _______, _______, _______, _______,   KC_P0,  KC_PDOT, _______, _______, KC_NLCK, KC_MPLY
 ),
-
+ 
 /* Mouse Layer (semi-col)
 * ,-----------------------------------------------------------------------------------.
 * | ACCL0| ACCL1| ACCL2|Email |Email2| Home | Wh_Up| WHL_L| M_Up | WHL_R|PASS| Meta |
@@ -225,14 +169,14 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 * |      |      |      |      |      |     BTN1    |      |      |      | Citx |      |
 * `-----------------------------------------------------------------------------------'
 */
-
+ 
 [_MOUSECURSOR] = LAYOUT_planck_grid(
  KC_ACL0, KC_ACL1, KC_ACL2, M_EMAIL,M_EMAIL2, KC_HOME, KC_PGUP, KC_WH_L, KC_MS_U, KC_WH_R, P_MPASS, P_META,
  _______, XXXXXXX, XXXXXXX, XXXXXXX, O_RTQ6H, KC_END , KC_PGDN, KC_MS_L, KC_MS_D, KC_MS_R, _______, O_DAYRN,
  _______, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, _______, KC_BTN2, KC_BTN3, KC_BTN4, KC_BTN5, _______, _______,
  _______, _______, _______, _______, _______, KC_BTN1, KC_BTN1, _______, _______, _______, P_CITRIX, O_AUTODC
 ),
-
+ 
 /* Adjust (Lower + Raise)
 * ,-----------------------------------------------------------------------------------.
 * | Reset|RGB TG|RGB ST|RGBH -|RGBH +|RGBS -|RGBS +|RGBV -|RGBV +|      |      |  Del |
@@ -250,7 +194,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
  _______, MUV_DE,  MUV_IN,  MU_ON,   MU_OFF,  MI_ON,   MI_OFF,  _______, BL_DEC, BL_INC, BL_STEP, BL_TOGG,
  _______, _______, _______, _______, _______, _______, _______, _______, CK_RST, CK_DOWN, CK_UP, CK_TOGG
 )
-
+ 

 };

@@ -281,7 +225,7 @@ void persistant_default_layer_set(uint16_t default_layer) {
 void tap(uint16_t keycode){ register_code(keycode); unregister_code(keycode); };


-bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+bool process_record_keymap(uint16_t keycode, keyrecord_t *record) {
  switch (keycode) {
    case QWERTY:
      if (record->event.pressed) {
@@ -369,36 +313,11 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) {
      }
      return false;
      break;
-    case DFU:
-      if (record->event.pressed) {
-        clear_keyboard();
-      #if defined(MIDI_ENABLE) && defined(MIDI_BASIC)
-        process_midi_all_notes_off();
-      #endif
-      #if defined(AUDIO_ENABLE) && !defined(NO_MUSIC_MODE)
-       music_all_notes_off();
-        uint16_t timer_start = timer_read();
-        PLAY_NOTE_ARRAY(tone_goodbye, false, 0);
-        shutdown_user();
-      while(timer_elapsed(timer_start) < 250)
-        wait_ms(1);
-        stop_all_notes();
-      #else
-        wait_ms(250);
-      #endif
-      // this is also done later in bootloader.c - not sure if it's neccesary here
-      #ifdef BOOTLOADER_CATERINA
-        *(uint16_t *)0x0800 = 0x7777; // these two are a-star-specific
-      #endif
-        bootloader_jump();
-      }
-      return false;
-      break;
  }
  return true;
 }

-void matrix_init_user(void) {
+void matrix_init_keymap(void) {
    #ifdef AUDIO_ENABLE
        startup_user();
    #endif
@@ -432,4 +351,3 @@ void music_scale_user(void)

 #endif

-
--- a/keyboards/planck/keymaps/ishtob/macros_public.h
+++ b/keyboards/planck/keymaps/ishtob/macros_public.h
@@ -1,57 +0,0 @@
-enum macro_keycodes {
-  KC_CITRIX,
-  KC_MPASS,
-  KC_META,
-  KC_RTQ6H,
-  KC_DAYRN,
-  KC_3DRN,
-  KC_AUTODC,
-  KC_EMAIL,
-  KC_EMAIL2
-};
-
-const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
-{
-    if (!eeconfig_is_enabled()) {
-      eeconfig_init();
-    }
-
-    switch (id) {
-      //my login macros
-      case KC_CITRIX:
-        if (record->event.pressed){
-          return MACRO (I(1), T(1), END);
-        }
-      case KC_MPASS:
-        if (record->event.pressed){
-          return MACRO (I(1), T(1), END);
-        }
-      case KC_META:
-        if (record->event.pressed){
-          return MACRO (I(1), T(1), END);
-        }
-      //my work macros
-      case KC_RTQ6H:
-        if (record->event.pressed){
-          return MACRO (I(1), T(TAB), T(0), T (3), T(0), T(0), T(TAB), T(DOWN), T(TAB), T(0), T (9), T(0), T(0), T(TAB), T(DOWN), T(TAB), T(1), T (5), T(0), T(0), T(TAB), T(DOWN), T(TAB), T(2), T (1), T(0), T(0), T(TAB), D(LALT), T(O), U(LALT), END);
-        }
-      case KC_AUTODC:
-        if (record->event.pressed){
-          return MACRO (I(1), D(LALT), T(V), U(LALT), T(TAB), T(TAB), T(TAB), T(TAB), T(TAB), T(TAB), T(TAB), T(TAB), T(TAB), T(T), T(TAB),T(N), D(LALT), T(S), U(LALT), END);
-        }
-      case KC_DAYRN:
-        if (record->event.pressed){
-          return MACRO (I(1), T(TAB), T(TAB), T(TAB), T(TAB), T(TAB), T(1), D(LALT), T(S), U(LALT), END);
-        }
-      //Ops macros
-      case KC_EMAIL:
-        if (record->event.pressed){
-          return MACRO (I(1), T(1), END);        }        
-      case KC_EMAIL2:
-        if (record->event.pressed){
-          return MACRO (I(1), T(1), END);
-        }  
-    }
-
-    return MACRO_NONE;
-} 
--- a/keyboards/planck/keymaps/ishtob/readme.md
+++ b/keyboards/planck/keymaps/ishtob/readme.md
@@ -2,7 +2,7 @@

 #Ishtob's personal planck layout

-THis is the default layout used with my planck light, though the rest of the keymap could also be used for the full sized planck or let's split.
+This is the default layout used with my planck light, though the rest of the keymap could also be used for the full sized planck or let's split.


 Main difference with the default layout:
@@ -14,8 +14,3 @@ Main difference with the default layout:
 * Capslock is on the base layer as it is used quite often with my work's software

 * Numbers layer on lower is positioned to resemble a numpad with 5 taking the location of J for the homing bump and easier entry
-
-
-# Secret Macros
-
-`macros_public.h` contains a list of macros that can be replaced with passwords or other sensative private macros. `macros_private.h` will be used if it exsists in the folder during compiling and will ignore `macros_public.h` The private macros can be excluded from git commits by adding it to the exclusion list.
--- a/keyboards/planck/keymaps/ishtob/rule.mk
+++ b/keyboards/planck/keymaps/ishtob/rule.mk
@@ -1,7 +1,3 @@
-ifeq ($(strip $(SECRETS)),yes)
-	OPT_DEF += -DSECRETS
-endif
-
 # Build Options
 #   comment out to disable the options.
 #
--- a/keyboards/satan/keymaps/spacemanspiff/keymap.c
+++ b/keyboards/satan/keymaps/spacemanspiff/keymap.c
@@ -0,0 +1,77 @@
+#include QMK_KEYBOARD_H
+
+// Each layer gets a name for readability, which is then used in the keymap matrix below.
+#define _BL 0
+#define _FL 1
+#define _CL 3
+
+// Add names for complex momentary keys, to keep the keymap matrix aligned better.
+#define CTL_ESC MT(MOD_LCTL,KC_ESC)
+#define GUI_ENT MT(MOD_RGUI, KC_ENT)
+
+#define _______ KC_TRNS
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+  /* Keymap _BL: (Base Layer) Default Layer
+   * ,-----------------------------------------------------------.
+   * |   `| F1| F2| F3| F4| F5| F6| F7| F8| F9| F0|  -|  =|Del   |
+   * |-----------------------------------------------------------|
+   * |Tab  |  Q|  W|  E|  R|  T|  Y|  U|  I|  O|  P|  [|  ]|  \  |
+   * |-----------------------------------------------------------|
+   * |Ctl/Esc|  A|  S|  D|  F|  G|  H|  J|  K|  L|  ;|  '|Return |
+   * |-----------------------------------------------------------|
+   * |Shift   |  Z|  X|  C|  V|  B|  N|  M|  ,|  .|  /|Shift     |
+   * |-----------------------------------------------------------|
+   * |Ctrl|Alt |Gui |      Space            |Gui |Alt |FN  |Ctrl |
+   * `-----------------------------------------------------------'
+   */
+[_BL] = LAYOUT_60_ansi(
+  KC_GRV,   KC_1,     KC_2,     KC_3,     KC_4,     KC_5,     KC_6,     KC_7,     KC_8,     KC_9,     KC_0,     KC_MINS,  KC_EQL,   KC_BSPC, \
+  KC_TAB,   KC_Q,     KC_W,     KC_E,     KC_R,     KC_T,     KC_Y,     KC_U,     KC_I,     KC_O,     KC_P,     KC_LBRC,  KC_RBRC,  KC_BSLS, \
+  CTL_ESC,  KC_A,     KC_S,     KC_D,     KC_F,     KC_G,     KC_H,     KC_J,     KC_K,     KC_L,     KC_SCLN,  KC_QUOT,            KC_ENT,  \
+  KC_LSFT,            KC_Z,     KC_X,     KC_C,     KC_V,     KC_B,     KC_N,     KC_M,     KC_COMM,  KC_DOT,   KC_SLSH,            KC_RSFT, \
+  MO(_CL),  KC_RALT,  KC_LGUI,                      KC_SPC,                                           GUI_ENT,  KC_RALT,  KC_RCTL,  MO(_FL)),
+
+
+  /* Keymap _FL: Function Layer
+   * ,-----------------------------------------------------------.
+   * |  `|   |   |   |   |   |   |   |   |   |   |   |   |  RESET|
+   * |-----------------------------------------------------------|
+   * |     |   |   |   |   |   |   |   |   |   |   |   |   |     |
+   * |-----------------------------------------------------------|
+   * |     |VDN|VUP|MUTE|   |   |   |       |   |   |   |        |
+   * |-----------------------------------------------------------|
+   * |        |   |   |   |   |   |   |   |   |   |   |          |
+   * |-----------------------------------------------------------|
+   * |    |    |    |                        |    |    |    |    |
+   * `-----------------------------------------------------------'
+   */
+[_FL] = LAYOUT_60_ansi(
+  KC_GRV,   _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  RESET,   \
+  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______, \
+  _______,  KC_VOLD,  KC_VOLU,  KC_MUTE,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,            _______, \
+  _______,            _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,            _______, \
+  _______,  _______,  _______,                      _______,                                          _______,  _______,  _______,  _______),
+
+  /* Keymap _CL: Control+ Layer
+   * ,-----------------------------------------------------------.
+   * |Esc| F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12| Del   |
+   * |-----------------------------------------------------------|
+   * |     |   |   |   |   |   |   |   |   |   |PGU|   |   |     |
+   * |-----------------------------------------------------------|
+   * |       |   |   |   |   |   |LFT| DN| UP|RGT|   |   |       |
+   * |-----------------------------------------------------------|
+   * |        |   |   |   |   |   |PGD|   |   |   |   |          |
+   * |-----------------------------------------------------------|
+   * |    |    |    |                       |    |    |     |    |
+   * `-----------------------------------------------------------'
+   */
+
+[_CL] = LAYOUT_60_ansi(
+  KC_ESC,  KC_F1,         KC_F2,         KC_F3,        KC_F4,        KC_F5,        KC_F6,        KC_F7,        KC_F8,        KC_F9,         KC_F10,         KC_F11,         KC_F12,         KC_DEL, \
+  KC_TAB,  LCTL(KC_Q),    LCTL(KC_W),    LCTL(KC_E),   LCTL(KC_R),   LCTL(KC_T),   LCTL(KC_Y),   LCTL(KC_U),   LCTL(KC_I),   LCTL(KC_O),    KC_PGUP,        KC_ESC,         LCTL(KC_RBRC),  LCTL(KC_BSLS), \
+  _______, LCTL(KC_A),    LCTL(KC_S),    LCTL(KC_D),   LCTL(KC_F),   LCTL(KC_G),   KC_LEFT,      KC_DOWN,      KC_UP,        KC_RIGHT,      LCTL(KC_SCLN),  LCTL(KC_QUOT),                  LCTL(KC_ENT),  \
+  KC_LSFT,                LCTL(KC_Z),    LCTL(KC_X),   LCTL(KC_C),   LCTL(KC_V),   KC_PGDN,      LCTL(KC_N),   LCTL(KC_M),   LCTL(KC_COMM), LCTL(KC_DOT),   LCTL(KC_SLSH),                  LCTL(KC_RSFT), \
+  _______, LCTL(KC_LALT), LCTL(KC_LGUI),                             LCTL(KC_SPC),                                                          LCTL(KC_RGUI),  LCTL(KC_RALT),  KC_RCTL,        MO(_FL)),
+};
+
--- a/keyboards/satan/keymaps/spacemanspiff/readme.md
+++ b/keyboards/satan/keymaps/spacemanspiff/readme.md
@@ -0,0 +1,34 @@
+# Spaceman Spiff Layout for GH60 Satan
+
+![Keyboard Layout](https://i.imgur.com/M9glFON.png)
+
+<!-- http://www.keyboard-layout-editor.com/#/gists/32feaaa31c29afb8198a8ef591db6ddf -->
+
+Designed specifically to make switching back-n-forth with the Apple's MacBook Pro keyboard intuitive. Has a slight tendency toward readline/vim keybindings.
+
+Caps locks becomes an `Esc` when pressed alone, or a `Ctrl` when pressed with another key.
+
+# Base Layer
+
+As simalar to the Apple keyboard as possible. Notiable exception is `Caps Lock`:
+- `Esc` when pressed alone
+- `Ctrl` when pressed with another key
+
+# Control+ Layer
+
+Left Ctrl key switches to the "Control+ Layer". This layer mostly acts like a control key in most cases, with a few exceptions:
+
+- `Ctl+` + `hjkl` are vim-style motion keys
+- `Ctl+` + `p` and `Ctl+` + `n` are page up and down
+- `Ctl+` + `Backspace` is forward delete
+
+# Fn Layer
+
+Audio Controls:
+- `Fn` + `a` Volume Down
+- `Fn` + `s` Volume Up
+- `Fn` + `d` Mute
+
+To flash this layout you need to press `Fn+Backspace`
+
+
--- a/keyboards/singa/readme.md
+++ b/keyboards/singa/readme.md
@@ -16,4 +16,34 @@ Make example for this keyboard (after setting up your build environment):

    make singa:default

+Flashing
+
+ps2avr(GB) boards use an atmega32a microcontroller and a different bootloader. It is not flashable using the regular QMK methods. 
+
+Windows: 
+1. Download [HIDBootFlash](http://vusb.wikidot.com/project:hidbootflash).
+2. Place your keyboard into reset. 
+3. Press the `Find Device` button and ensure that your keyboard is found.
+4. Press the `Open .hex File` button and locate the `.hex` file you created.
+5. Press the `Flash Device` button and wait for the process to complete. 
+
+macOS:
+1. Install homebrew by typing the following:   
+    ```
+    /usr/bin/ruby -e "$(curl -fsSL https://raw.githubusercontent.com/Homebrew/install/master/install)"
+    ```
+2. Install `crosspack-avr`.  
+    ```
+    brew cask install crosspack-avr
+    ```
+3. Install the following packages:
+    ```
+    brew install python
+    brew install pyusb
+    brew install --HEAD`https://raw.githubusercontent.com/robertgzr/homebrew-tap/master/bootloadhid.rb
+
+4. Place your keyboard into reset. 
+5. Flash the board by typing `bootloadHID -r` followed by the path to your `.hex` file. 
+
+
 See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information.
--- a/quantum/split_common/matrix.c
+++ b/quantum/split_common/matrix.c
@@ -340,6 +340,24 @@ void matrix_slave_scan(void) {
    for (int i = 0; i < ROWS_PER_HAND; ++i) {
        serial_slave_buffer[i] = matrix[offset+i];
    }
+#endif
+#ifdef USE_I2C
+#ifdef BACKLIGHT_ENABLE
+    // Read backlight level sent from master and update level on slave
+    backlight_set(i2c_slave_buffer[0]);
+#endif
+    for (int i = 0; i < ROWS_PER_HAND; ++i) {
+        i2c_slave_buffer[i+1] = matrix[offset+i];
+    }
+#else // USE_SERIAL
+    for (int i = 0; i < ROWS_PER_HAND; ++i) {
+        serial_slave_buffer[i] = matrix[offset+i];
+    }
+
+#ifdef BACKLIGHT_ENABLE
+    // Read backlight level sent from master and update level on slave
+    backlight_set(serial_master_buffer[SERIAL_BACKLIT_START]);
+#endif
 #endif
    matrix_slave_scan_user();
 }
--- a/quantum/template/base/readme.md
+++ b/quantum/template/base/readme.md
--- a/quantum/template/ps2avrgb/readme.md
+++ b/quantum/template/ps2avrgb/readme.md
@@ -0,0 +1,44 @@
+# %KEYBOARD%
+
+![%KEYBOARD%](imgur.com image replace me!)
+
+A short description of the keyboard/project
+
+Keyboard Maintainer: [You](https://github.com/yourusername)  
+Hardware Supported: The PCBs, controllers supported  
+Hardware Availability: links to where you can find this hardware
+
+Make example for this keyboard (after setting up your build environment):
+
+    make %KEYBOARD%:default
+
+Flashing
+
+ps2avr(GB) boards use an atmega32a microcontroller and a different bootloader. It is not flashable using the regular QMK methods. 
+
+Windows: 
+1. Download [HIDBootFlash](http://vusb.wikidot.com/project:hidbootflash).
+2. Place your keyboard into reset. 
+3. Press the `Find Device` button and ensure that your keyboard is found.
+4. Press the `Open .hex File` button and locate the `.hex` file you created.
+5. Press the `Flash Device` button and wait for the process to complete. 
+
+macOS:
+1. Install homebrew by typing the following:   
+    ```
+    /usr/bin/ruby -e "$(curl -fsSL https://raw.githubusercontent.com/Homebrew/install/master/install)"
+    ```
+2. Install `crosspack-avr`.  
+    ```
+    brew cask install crosspack-avr
+    ```
+3. Install the following packages:
+    ```
+    brew install python
+    brew install pyusb
+    brew install --HEAD`https://raw.githubusercontent.com/robertgzr/homebrew-tap/master/bootloadhid.rb
+
+4. Place your keyboard into reset. 
+5. Flash the board by typing `bootloadHID -r` followed by the path to your `.hex` file. 
+
+See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information.
--- a/users/ishtob/config.h
+++ b/users/ishtob/config.h
@@ -0,0 +1,76 @@
+#ifndef CONFIG_USER_H
+#define CONFIG_USER_H
+
+#include "config_common.h"
+
+#ifdef AUDIO_ENABLE
+    #define STARTUP_SONG SONG(PLANCK_SOUND)
+    // #define STARTUP_SONG SONG(NO_SOUND)
+
+    #define DEFAULT_LAYER_SONGS { SONG(QWERTY_SOUND), \
+                                  SONG(COLEMAK_SOUND), \
+                                  SONG(DVORAK_SOUND) \
+                                }
+#endif
+
+//#define LEADER_TIMEOUT 300
+//#define BACKLIGHT_BREATHING
+#define PREVENT_STUCK_MODIFIERS
+//#define PERMISSIVE_HOLD
+// #define QMK_KEYS_PER_SCAN 4
+
+//audio clicky
+  //#define AUDIO_CLICKY
+  // to enable clicky on startup
+  //#define AUDIO_CLICKY_ON
+  //#define AUDIO_CLICKY_FREQ_RANDOMNESS 1.0f
+
+/* ws2812 RGB LED
+#define RGB_DI_PIN B5
+#define RGBLIGHT_ANIMATIONS
+#define RGBLED_NUM 8     // Number of LEDs
+#define RGBLIGHT_HUE_STEP 10
+#define RGBLIGHT_SAT_STEP 17
+*/
+#undef PLANCK_MIT_LAYOUT
+
+//#define MUON_LEFT
+
+#undef DEBOUNCE
+#define DEBOUNCE 0
+
+//rgb-reactive
+//#define RGB_MATRIX_KEYPRESSES
+//#define EECONFIG_RGB_MATRIX (uint32_t *)16
+
+//skip usb startup check
+//#define NO_USB_STARTUP_CHECK
+
+
+/*
+ * MIDI options
+ */
+
+/* Prevent use of disabled MIDI features in the keymap */
+//#define MIDI_ENABLE_STRICT 1
+
+/* enable basic MIDI features:
+   - MIDI notes can be sent when in Music mode is on
+*/
+#define MIDI_BASIC
+
+/* enable advanced MIDI features:
+   - MIDI notes can be added to the keymap
+   - Octave shift and transpose
+   - Virtual sustain, portamento, and modulation wheel
+   - etc.
+*/
+//#define MIDI_ADVANCED
+
+/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
+//#define MIDI_TONE_KEYCODE_OCTAVES 2
+
+// Most tactile encoders have detents every 4 stages
+#define ENCODER_RESOLUTION 4
+                                
+#endif
--- a/users/ishtob/ishtob.c
+++ b/users/ishtob/ishtob.c
@@ -0,0 +1,69 @@
+/*
+Based on userspace written by @drashna 2017
+Copyright 2018 Hsian Chang  <ishtob@gmail.com> @ishtob
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include "ishtob.h"
+#include "action.h"
+#include "action_layer.h"
+// #include "dynamic_macro.h"
+#ifdef AUDIO_ENABLE
+  #include "audio.h"
+#endif
+
+
+// Add reconfigurable functions here, for keymap customization
+// This allows for a global, userspace functions, and continued
+// customization of the keymap.  Use _keymap instead of _user
+// functions in the keymaps
+__attribute__ ((weak))
+void matrix_init_keymap(void) {}
+
+__attribute__ ((weak))
+void matrix_scan_keymap(void) {}
+
+__attribute__ ((weak))
+bool process_record_keymap(uint16_t keycode, keyrecord_t *record) {
+  return true;
+}
+
+__attribute__ ((weak))
+bool process_record_secrets(uint16_t keycode, keyrecord_t *record) {
+  return true;
+}
+
+// Call user matrix init, then call the keymap's init function
+void matrix_init_user(void) {
+  matrix_init_keymap();
+}
+
+// No global matrix scan code, so just run keymap's matix
+// scan function
+void matrix_scan_user(void) {
+  matrix_scan_keymap();
+}
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+    switch (keycode) {
+    case DFU:
+      if (record->event.pressed) {
+        clear_keyboard();
+        reset_keyboard();
+      }
+      return false;
+      break;      
+    }
+  return process_record_keymap(keycode, record) && process_record_secrets(keycode, record);
+}
+
--- a/users/ishtob/ishtob.h
+++ b/users/ishtob/ishtob.h
@@ -0,0 +1,76 @@
+#ifndef USERSPACE
+#define USERSPACE
+#include "quantum.h"
+
+enum userspace_keycodes {
+  QWERTY = SAFE_RANGE,
+  COLEMAK,
+  DVORAK,
+  PLOVER,
+  LOWER,
+  RAISE,
+  BACKLIT,
+  EXT_PLV,
+  DFU,
+  P_CITRIX, //these macro exsists in macros_private.c, which is excluded from git
+  P_MPASS,
+  P_META,
+  O_DAYRN,
+  O_RTQ6H,
+  O_3DRN,
+  O_AUTODC,
+  M_EMAIL,
+  M_EMAIL2
+};
+
+// Each layer gets a name for readability, which is then used in the keymap matrix below.
+// The underscores don't mean anything - you can have a layer called STUFF or any other name.
+// Layer names don't all need to be of the same length, obviously, and you can also skip them
+// entirely and just use numbers.
+#define _QWERTY 0
+#define _COLEMAK 1
+#define _DVORAK 2
+#define _LOWER 3
+#define _RAISE 4
+#define _PLOVER 5
+#define _FNLAYER 6
+#define _NUMLAY 7
+#define _MOUSECURSOR 8
+#define _ADJUST 16
+
+
+
+#define LOWER MO(_LOWER)
+#define RAISE MO(_RAISE)
+
+// Fillers to make layering more clear
+#define _______ KC_TRNS
+#define XXXXXXX KC_NO
+// Custom macros
+#define CTL_ESC     CTL_T(KC_ESC)               // Tap for Esc, hold for Ctrl
+#define CTL_TTAB    CTL_T(KC_TAB)               // Tap for Esc, hold for Ctrl
+#define CTL_ENT     CTL_T(KC_ENT)               // Tap for Enter, hold for Ctrl
+#define SFT_ENT     SFT_T(KC_ENT)               // Tap for Enter, hold for Shift
+// Requires KC_TRNS/_______ for the trigger key in the destination layer
+#define LT_FN(kc)   LT(_FNLAYER, kc)            // L-ayer T-ap Function Layer
+#define LT_MC(kc)   LT(_MOUSECURSOR, kc)        // L-ayer T-ap M-ouse C-ursor
+#define LT_RAI(kc)  LT(_RAISE, kc)              // L-ayer T-ap to Raise
+#define TG_NUMLAY   TG(_NUMLAY)                 //Toggle for layer _NUMLAY
+/*
+enum userspace_layers {
+  _QWERTY = 0,
+  _COLEMAK,
+  _DVORAK,
+  _LOWER,
+  _RAISE,
+  _PLOVER,
+  _FNLAYER,
+  _NUMLAY,
+  _MOUSECURSOR,
+  _ADJUST
+};
+*/
+
+
+
+#endif // !USERSPACE
--- a/users/ishtob/readme.md
+++ b/users/ishtob/readme.md
@@ -0,0 +1,87 @@
+# Ishtob's userspace
+
+under developement
+
+# Secret Macros
+
+This section is a modified version of what @drashna did in his userspace: https://github.com/qmk/qmk_firmware/tree/master/users/drashna#secret-macros
+
+`macros_private.c` will be used if it exsists in the userspace folder during compiling.
+
+To get started, put the following in rules.mk. this will have the compiler include the macros_private.c file if it exsists.
+```
+SRC += ishtob.c
+ifneq ($(wildcard $(USER_PATH)/macros_private.c),"")
+  SRC += macros_private.c
+endif
+ifeq ($(strip $(NO_SECRETS)), yes)
+    OPT_DEFS += -DNO_SECRETS
+endif
+```
+
+Remember that all macro keycode has to be present in the header file (ishtob.h) to prevent error during compile.
+
+Next, you setup macros_private.c, ensure the keycodes are defined in ishtob.h (or your keymap.h).
+Here is an example of my macros with the sensitive login information removed:
+```
+#include "ishtob.h" //replace this with your userspace or keymap
+#include "quantum.h"
+
+#pragma message "secret macros included" //debug line to let me know this file is included in the compile
+
+//this str is for the monthly password rotation per my workplace's security policy
+char my_str[5] = "stuff";
+
+bool process_record_secrets(uint16_t keycode, keyrecord_t *record) {
+  if (record->event.pressed) {
+    switch(keycode) {
+      //my login macros
+      case P_CITRIX:
+          SEND_STRING("username"SS_TAP(X_TAB)"something");
+          send_string(my_str);
+          return false;
+      case P_MPASS:
+          SEND_STRING("something");
+          send_string(my_str);
+          return false;
+      case P_META:
+          SEND_STRING("metausername");
+          return false;
+      //my work macros for the meta application
+      case O_RTQ6H:
+          SEND_STRING(SS_TAP(X_TAB)"0300"SS_TAP(X_TAB)SS_TAP(X_DOWN)SS_TAP(X_TAB)"0900"SS_TAP(X_TAB)SS_TAP(X_DOWN)SS_TAP(X_TAB)"1500"SS_TAP(X_TAB)SS_TAP(X_DOWN)SS_TAP(X_TAB)"2100"SS_TAP(X_TAB)SS_LALT("o"));
+          return false;
+      case O_AUTODC:
+          SEND_STRING(SS_LALT("v")SS_TAP(X_TAB)SS_TAP(X_TAB)SS_TAP(X_TAB)SS_TAP(X_TAB)SS_TAP(X_TAB)SS_TAP(X_TAB)SS_TAP(X_TAB)SS_TAP(X_TAB)SS_TAP(X_TAB)"T"SS_TAP(X_TAB)"N"SS_LALT("s"));
+          return false;
+      case O_DAYRN:
+          SEND_STRING(SS_TAP(X_TAB)SS_TAP(X_TAB)SS_TAP(X_TAB)SS_TAP(X_TAB)SS_TAP(X_TAB)"1"SS_LALT("s"));
+          return false;
+      //Ops macros
+      case M_EMAIL:
+          SEND_STRING("privatemail@email.com");
+          return false;       
+      case M_EMAIL2:
+          SEND_STRING("workemail@work.com");
+          return false;
+     }
+   }
+  return true;
+} 
+```
+
+
+Finally, add the following to .git/info/exclude to prevent private macros from being committed to git.
+```
+# git ls-files --others --exclude-from=.git/info/exclude
+# Lines that start with '#' are comments.
+# For a project mostly in C, the following would be a good set of
+# exclude patterns (uncomment them if you want to use them):
+# *.[oa]
+# *~
+/users/ishtob/macros_private.c
+```
+
+# Special mentions
+
+special thanks to @drashna for helping me through quite a bit of these codes.
--- a/users/ishtob/rules.mk
+++ b/users/ishtob/rules.mk
@@ -0,0 +1,7 @@
+SRC += ishtob.c
+ifneq ($(wildcard $(USER_PATH)/macros_private.c),"")
+  SRC += macros_private.c
+endif
+ifeq ($(strip $(NO_SECRETS)), yes)
+    OPT_DEFS += -DNO_SECRETS
+endif
Author	SHA1	Message	Date
Seth Barberee	3eabd7946e	Split Common: Serial Backlight LED fix (#3586 )	2018-08-11 11:10:23 -07:00
ishtob	fd0bd29a0a	Keymap: adding my personal userspace to QMK master (#3605 ) * Adding my personal planck keymap * Adding readme.md to my keymap * Create my userspace add users/ishtob/ * Moved macros off keymap macros now exsists in my userspace, moved them off keyboard specific keymaps * Create my userspace add users/ishtob/ * rebase from main QMK repo	2018-08-10 08:30:21 -07:00
MakotoKurauchi	feb5e4aaeb	Keyboard: Helix serial improvements (#3608 ) * add change_reciver2sender()/change_sender2reciver() This is a change to improve readability. * txled, rxled off in matrix_init() * add serial_send_packet() / serial_recive_packet() This is a change to reduce object size. * add serial_low() at ISR() top * add __attribute__((always_inline)) to some functions * modify serial_send_packet()/serial_recive_packet() A little, object size reduction. A little, speedup. * add debug code to helix/serial.c * Adjust sampling timing of serial signal being received * add split_scomm.c/split_scomm.h and change serial.c/serial.h serial.c was divided into 2 layers, split_scom.c and serial.c. The upper layer split_scomm.c is called from matrix.c. The lower layer serial.c accesses the hardware. * add split_scomm.c/split_scomm.h into helix/rev1 * reduce object size helix/rev2/matrix.c * remove checksum check, add parity check * force occur parity error for test * parity test ok. remove test code * change some comment & add skip code when buffer_size == 0 * serial.c: multiple types of transaction support Add 4 bits transaction-type field at packet top. Select Transaction Descriptor Table entry by transaction-type. * helix serial master-slave transaction optimize Using multi-type transaction feature of serial.c, communication contents between master slaves were optimized. * add debug code for retry * add comment into each config.h * fix ISR status drop * add a debug macro 'debug_retry_chg()' * reduce led_test size * remove debug code from helix/serial.c and etc. * helix:five_rows change TAPPING_TERM value 140 * Improved compatibility with let's split of serial.c. Finish helix/serial.c improvement. - The difference with the original let's split's serial.c - It's high-speed about 4 times. - Stable bi-directional data transfer. (Helix need master to slave transfer) - serial.h was divided 2 files, serial_config.h and sereial.h - With multiple types of transaction support, communication contents can be optimized. (NEW flexible API) - USE OLD Simple APIs (compatible with let's split serial.c) - files : - serial_config.h -- hardware configuration (need include by config.h) - serial.c/serial.h -- serial communication - USE NEW flexible APIs. (Support multi-type transaction function.) serial.c was divided into 2 layers, split_scom.c and serial.c. The upper layer split_scomm.c is called from matrix.c. The lower layer serial.c accesses the hardware. - files - split_scomm.c -- communication buffer is defined in here. call by matrix.c. - split_scomm.h -- buffer size is defined in here. include by matrix.c, split_util.c - serial_config.h -- hardware configuration (need include by config.h) To use the NEW API, specify #define SERIAL_USE_MULTI_TRANSACTION - serial.c/serial.h -- serial communication lower layer - NEW APIs for serial.c / serial.h (The lower layer) // Soft Serial Transaction Descriptor typedef struct _SSTD_t { uint8_t status; uint8_t initiator2target_buffer_size; uint8_t initiator2target_buffer; uint8_t target2initiator_buffer_size; uint8_t target2initiator_buffer; } SSTD_t; // initiator is transaction start side void soft_serial_initiator_init(SSTD_t sstd_table); // target is interrupt accept side void soft_serial_target_init(SSTD_t *sstd_table); int soft_serial_transaction(int sstd_index); int soft_serial_get_and_clean_target_status(int sstd_index); - NEW APIs for split_scomm.c / split_scomm.h (The upper layer) move from old serial.c the following buffer and functions serial_slave_buffer[] serial_master_buffer[] void serial_master_init(void) void serial_slave_init(void) int serial_update_buffers(void) define SERIAL_xxxxx_BUFFER_LENGTH move from serial_config.h to split_scomm.h	2018-08-10 08:22:09 -07:00
MechMerlin	90d8ed6c44	Keyboard: Add Configurator support for Clueboard 66 Hotswap (#3522 )	2018-08-10 08:15:11 -07:00
Erick Ozaki	243764b83d	Keymap: Custom L0 layout for ergodone (#3591 )	2018-08-09 18:09:43 -07:00
MechMerlin	489a922f34	Keyboard: Disable mouse keys for kbd6x (#3603 )	2018-08-09 18:03:34 -07:00
Christopher Sexton	1ac2dd9b63	Keymap: Spaceman Spiff layout for KBD75 (#3595 ) ![Keyboard Layout](https://i.imgur.com/tQLYDvu.png) <!-- http://www.keyboard-layout-editor.com/#/gists/c1e8a15c68e4c52eed84653f21ae2d29 --> Designed specifically to make switching back-n-forth with the Apple's MacBook Pro keyboard intuitive. Has a slight tendency toward readline/vim keybindings. Caps locks becomes an `Esc` when pressed alone, or a `Ctrl` when pressed with another key. Base Layer ---------- As simalar to the Apple keyboard as possible. Notiable exception is `Caps Lock`: - `Esc` when pressed alone - `Ctrl` when pressed with another key Control+ Layer -------------- Left `Ctrl` key switches to the "Control+ Layer". This layer mostly acts like a control key in most cases, with a few exceptions: - `Ctl+` + `hjkl` are vim-style motion keys - `Ctl+` + `p` and `Ctl+` + `n` are page up and down - `Ctl+` + `Backspace` is forward delete Fn Layer -------- Audio Controls: - `Fn` + `a` Volume Down - `Fn` + `s` Volume Up - `Fn` + `d` Mute To flash this layout you need to press `Fn+Backspace`	2018-08-09 17:53:13 -07:00
Christopher Sexton	98afb45a27	Keymap: Spaceman Spiff layout for the GH60 Satan (#3596 ) ![Keyboard Layout](https://i.imgur.com/M9glFON.png) Designed specifically to make switching back-n-forth with the Apple's MacBook Pro keyboard intuitive. Has a slight tendency toward readline/vim keybindings. Caps locks becomes an `Esc` when pressed alone, or a `Ctrl` when pressed with another key. Base Layer ---------- As simalar to the Apple keyboard as possible. Notiable exception is `Caps Lock`: - `Esc` when pressed alone - `Ctrl` when pressed with another key Control+ Layer -------------- Left Ctrl key switches to the "Control+ Layer". This layer mostly acts like a control key in most cases, with a few exceptions: - `Ctl+` + `hjkl` are vim-style motion keys - `Ctl+` + `p` and `Ctl+` + `n` are page up and down - `Ctl+` + `Backspace` is forward delete Fn Layer -------- Audio Controls: - `Fn` + `a` Volume Down - `Fn` + `s` Volume Up - `Fn` + `d` Mute To flash this layout you need to press `Fn+Backspace`	2018-08-09 17:52:35 -07:00
Yan-Fa Li	83da38c5e4	Keymap: Update cache22 default keymap (#3597 ) - requested by rockydbull	2018-08-09 17:50:09 -07:00
MechMerlin	ccfe60eb57	Update ps2avrgb readme (#3599 ) * give ps2avrgb a specific readme * add homebrew and crosspack avr step * update readme of all ps2avrgb boards to reflect the new template	2018-08-09 17:45:43 -07:00