Add python-pip as package dependency for archlinux (#7041)

* Version 1 of keymappings

* Adding updated keymappings

* Adding hash/pound symbol to layer

* Removing broken macros

* Adding to readme. Amending value of pound sign

* Changing language in readme

* Addressing PR comments. Removing unneeded code, corrected syntax

* Removing commented out code and fixing white space issues

* Small clean up to readme

docs/coding_conventions_c.md

@@ -31,17 +31,17 @@ Here is an example for easy reference:
 ```c
 /* Enums for foo */
 enum foo_state {
-  FOO_BAR,
-  FOO_BAZ,
+    FOO_BAR,
+    FOO_BAZ,
 };
 
 /* Returns a value */
 int foo(void) {
-  if (some_condition) {
-    return FOO_BAR;
-  } else {
-    return -1;
-  }
+    if (some_condition) {
+        return FOO_BAR;
+    } else {
+        return -1;
+    }
 }
 ```
 

keyboards/dztech/dz65rgb/dz65rgb.c

@@ -114,3 +114,12 @@ void suspend_wakeup_init_kb(void)
     rgb_matrix_set_suspend_state(false);
     suspend_wakeup_init_user();
 }
+
+__attribute__ ((weak))
+void rgb_matrix_indicators_user(void)
+{
+    if (IS_LED_ON(host_keyboard_leds(), USB_LED_CAPS_LOCK))
+    {
+        rgb_matrix_set_color(8, 0xFF, 0xFF, 0xFF);
+    }
+}

keyboards/dztech/dz65rgb/keymaps/default/keymap.c

@@ -16,14 +16,6 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 		    KC_TRNS,       KC_TRNS,  KC_TRNS,                  KC_TRNS,                   KC_TRNS, KC_TRNS, KC_TRNS,  KC_MPRV,          KC_VOLD,  KC_MNXT),
 };
 
-void rgb_matrix_indicators_user(void)
-{
-	    if (IS_LED_ON(host_keyboard_leds(), USB_LED_CAPS_LOCK))
-	    {
-	      rgb_matrix_set_color(8, 0xFF, 0xFF, 0xFF);
-	    }
-}
-
 void matrix_init_user(void)
 {
   //user initialization

keyboards/handwired/splittest/teensy_2/config.h

@@ -29,5 +29,3 @@
 
 // teensy has vbus detection issues - use usb detection instead
 #define SPLIT_USB_DETECT
-// required for teensy slave otherwise it "locks up" during startup
-#define NO_USB_STARTUP_CHECK

keyboards/maartenwut/plain60/keymaps/via/keymap.c

@@ -0,0 +1,17 @@
+#include QMK_KEYBOARD_H
+
+// Each layer gets a name for readability, which is then used in the keymap matrix below.
+// The underscores don't mean anything - you can have a layer called STUFF or any other name.
+// Layer names don't all need to be of the same length, obviously, and you can also skip them
+// entirely and just use numbers.
+#define _MA 0
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+[_MA] = LAYOUT(
+  KC_ESC,  KC_1,    KC_2,   KC_3,   KC_4,   KC_5,   KC_6,   KC_7,   KC_8,   KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_BSLS, KC_BSPC, \
+  KC_TAB,  KC_Q,    KC_W,   KC_E,   KC_R,   KC_T,   KC_Y,   KC_U,   KC_I,   KC_O,    KC_P,    KC_LBRC, KC_RBRC, KC_BSLS,          \
+  KC_CAPS, KC_A,    KC_S,   KC_D,   KC_F,   KC_G,   KC_H,   KC_J,   KC_K,   KC_L,    KC_SCLN, KC_QUOT, KC_BSLS, KC_ENT,           \
+  KC_LSFT, KC_NUBS, KC_Z,   KC_X,   KC_C,   KC_V,   KC_B,   KC_N,   KC_M,   KC_COMM, KC_DOT,  KC_SLSH, KC_RSFT, KC_UP,            \
+  KC_LCTL, KC_LGUI, KC_LALT,                        KC_SPC,                          KC_RALT, KC_RGUI, KC_APP,  KC_RCTRL)
+};

keyboards/maartenwut/plain60/keymaps/via/rules.mk

@@ -0,0 +1,6 @@
+# rules.mk overrides to enable VIA
+SRC += keyboards/wilba_tech/wt_main.c
+
+RAW_ENABLE = yes
+DYNAMIC_KEYMAP_ENABLE = yes
+

keyboards/maartenwut/plain60/rules.mk

@@ -1,4 +1,3 @@
-SRC += keyboards/wilba_tech/wt_main.c
 # MCU name
 MCU = atmega32u4
 
@@ -62,7 +61,6 @@ MIDI_ENABLE = no 		# MIDI controls
 AUDIO_ENABLE = no
 UNICODE_ENABLE = no 		# Unicode
 BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
-RAW_ENABLE = yes
-DYNAMIC_KEYMAP_ENABLE = yes
 
 LAYOUTS = 60_ansi 60_ansi_split_bs_rshift 60_hhkb 60_iso 60_tsangan_hhkb
+

keyboards/planck/keymaps/smittey/config.h

@@ -0,0 +1,16 @@
+#pragma once
+
+#ifdef AUDIO_ENABLE
+    #define STARTUP_SONG SONG(PLANCK_SOUND)
+    // #define STARTUP_SONG SONG(NO_SOUND)
+
+    #define DEFAULT_LAYER_SONGS { SONG(QWERTY_SOUND), \
+                                  SONG(COLEMAK_SOUND), \
+                                  SONG(DVORAK_SOUND) \
+                                }
+#endif
+
+#define MIDI_BASIC
+
+// Most tactile encoders have detents every 4 stages
+#define ENCODER_RESOLUTION 4

keyboards/planck/keymaps/smittey/keymap.c

@@ -0,0 +1,375 @@
+/* Copyright 2015-2017 Jack Humbert
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include QMK_KEYBOARD_H
+#include "muse.h"
+
+extern keymap_config_t keymap_config;
+
+enum planck_layers {
+  _QWERTY,
+  _COLEMAK,
+  _DVORAK,
+  _LOWER,
+  _RAISE,
+  _PLOVER,
+  _ADJUST,
+  _FN,
+  _SPACE_FN
+};
+
+enum planck_keycodes {
+  QWERTY = SAFE_RANGE,
+  COLEMAK,
+  DVORAK,
+  PLOVER,
+  BACKLIT,
+  EXT_PLV
+};
+
+// Fillers to make layering more clear
+#define LOWER MO(_LOWER)
+#define RAISE MO(_RAISE)
+#define FN MO(_FN)
+#define SPACE_FN LT(_SPACE_FN, KC_SPC)
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+  /* Qwerty                                                                              
+  * ,-----------------------------------------------------------------------------------.
+  * | Tab  |   Q  |   W  |   E  |   R  |   T  |   Y  |   U  |   I  |   O  |   P  | Bksp |
+  * |------+------+------+------+------+-------------+------+------+------+------+------|
+  * | Esc  |   A  |   S  |   D  |   F  |   G  |   H  |   J  |   K  |   L  |   ;  |  "   |
+  * |------+------+------+------+------+------|------+------+------+------+------+------|
+  * | Shift|   Z  |   X  |   C  |   V  |   B  |   N  |   M  |   ,  |   .  |   /  |Enter |
+  * |------+------+------+------+------+------+------+------+------+------+------+------|
+  * | Ctrl |  FN  | Alt  | GUI  |Lower |    Space    |Raise | Left | Down |  Up  |Right |
+  * `-----------------------------------------------------------------------------------'
+  */
+  [_QWERTY] = LAYOUT_planck_grid(
+      KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,      KC_Y,      KC_U,    KC_I,    KC_O,    KC_P,    KC_BSPC,
+      KC_ESC,  KC_A,    KC_S,    KC_D,    KC_F,    KC_G,      KC_H,      KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT,
+      KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,      KC_N,      KC_M,    KC_COMM, KC_DOT,  KC_SLSH, MT(MOD_LSFT, KC_ENT),
+      KC_LCTL, FN,      KC_LALT, KC_LGUI, LOWER,   SPACE_FN,  SPACE_FN,  RAISE,   KC_LEFT, KC_DOWN, KC_UP,   KC_RGHT
+  ),
+
+
+  /* Lower
+  * ,-----------------------------------------------------------------------------------.
+  * |      |   1  |   2  |   3  |   4  |   5  |   6  |   7  |   8  |   9  |   0  | Bksp |
+  * |------+------+------+------+------+-------------+------+------+------+------+------|
+  * |      |      |      |      |      |      |   *  |   4  |   5  |   6  |   -  |      |
+  * |------+------+------+------+------+------|------+------+------+------+------+------|
+  * |      |      |      |      |      |      |   /  |   1  |   2  |   3  |   +  |Enter |
+  * |------+------+------+------+------+------+------+------+------+------+------+------|
+  * |      |      |      |      |      |    Space    |      |   0  |   .  |   =  |      |
+  * `-----------------------------------------------------------------------------------'
+  */
+  [_LOWER] = LAYOUT_planck_grid(
+      XXXXXXX, KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,     KC_7,     KC_8,    KC_9,     KC_0,     KC_BSPC, 
+      XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_ASTR,  KC_4,     KC_5,    KC_6,     KC_MINS,  XXXXXXX, 
+      _______, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_SLSH,  KC_1,     KC_2,    KC_3,     KC_PLUS,  MT(MOD_LSFT, KC_ENT), 
+      _______, XXXXXXX, _______, _______, _______, KC_SPC,  KC_SPC,   _______,  KC_0,    KC_DOT,   KC_EQL,   XXXXXXX
+  ),
+
+  /* Raise
+  * ,-----------------------------------------------------------------------------------.
+  * |   `  |   !  |   "  |   £  |   $  |   %  |   ^  |   &  |   *  |   (  |   )  | Bksp |
+  * |------+------+------+------+------+-------------+------+------+------+------+------|
+  * |      |   ~  |   #  |   /  |   {  |   [  |   ]  |   }  |   \  |   -  |   =  |  |   |
+  * |------+------+------+------+------+------|------+------+------+------+------+------|
+  * |      |      |      |      |      |      |      |      |      |   _  |   +  |Enter |
+  * |------+------+------+------+------+------+------+------+------+------+------+------|
+  * |      |      |      |      |      |    Space    |      | Home | PgDn | PgUp | End  |            
+  * `-----------------------------------------------------------------------------------'
+  */
+  [_RAISE] = LAYOUT_planck_grid(
+      KC_GRV,   KC_EXLM, KC_DQUO,  LALT(KC_4), KC_DLR,   KC_PERC,  KC_CIRC,  KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_BSPC, 
+      XXXXXXX,  KC_TILD, KC_NUHS,  KC_SLSH,    KC_LCBR,  KC_LBRC,  KC_RBRC,  KC_RCBR, KC_BSLS, KC_MINS, KC_EQL,  KC_PIPE, 
+      XXXXXXX,  XXXXXXX, XXXXXXX,  XXXXXXX,    XXXXXXX,  XXXXXXX,  XXXXXXX,  XXXXXXX, XXXXXXX, KC_UNDS, KC_PLUS, MT(MOD_LSFT, KC_ENT), 
+      _______,  XXXXXXX, _______,  _______,    _______,  KC_SPC,   KC_SPC,   _______, KC_HOME, KC_PGDN, KC_PGUP, KC_END
+  ),
+
+
+  /* fn
+  * ,-----------------------------------------------------------------------------------.
+  * |DelWrd|  F1  |  F2  |  F3  |  F4  |  F5  |  F6  |  F7  |  F8  |  F9  | F10  | Del  |
+  * |------+------+------+------+------+-------------+------+------+------+------+------|
+  * |      |  F11 |  F12 |      |      |      |      |      |      |      |      |      |
+  * |------+------+------+------+------+------|------+------+------+------+------+------|
+  * |      |      |      |      |      |      |      |      |      |      |      | Enter|
+  * |------+------+------+------+------+------+------+------+------+------+------+------|
+  * |      |      |      |      |      |    Space    |      |      |      |      |      |
+  * `-----------------------------------------------------------------------------------'
+  */
+  [_FN] = LAYOUT_planck_grid(
+      LALT(KC_BSPC),  KC_F1,   KC_F2,   KC_F3,   KC_F4,    KC_F5,    KC_F6,    KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_DEL, 
+      XXXXXXX,        KC_F11,  KC_F12,  XXXXXXX, XXXXXXX,  XXXXXXX,  XXXXXXX,  XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, 
+      XXXXXXX,        XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,  XXXXXXX,  XXXXXXX,  XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, 
+      XXXXXXX,        _______, XXXXXXX, XXXXXXX, XXXXXXX,  KC_SPC,   KC_SPC,   XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX
+  ),
+
+
+  /* Space fn
+  * ,-----------------------------------------------------------------------------------.
+  * |PRNT SC|      |  UP  |      |      |      |      |      |      |      |      |SLEEP |
+  * |-------+------+------+------+------+-------------+------+------+------+------+------|
+  * |       | LEFT | DOWN | RIGHT|      |      |      | LEFT | DOWN |  UP  | RIGHT|      |
+  * |-------+------+------+------+------+------|------+------+------+------+------+------| 
+  * |       |      |      |      |      |      |      |      |      |      |      |      |
+  * |-------+------+------+------+------+------+------+------+------+------+------+------|
+  * |       |      |      |      |      |             |      | MUTE |VOLDWN|VOL UP|      |
+  * `-----------------------------------------------------------------------------------'
+  */
+  [_SPACE_FN] = LAYOUT_planck_grid(
+      KC_PSCR,  XXXXXXX, KC_UP,    XXXXXXX,   XXXXXXX,  XXXXXXX,  XXXXXXX,  XXXXXXX, XXXXXXX,  XXXXXXX,     XXXXXXX,    KC_SLEP, 
+      XXXXXXX,  KC_LEFT, KC_DOWN,  KC_RIGHT,  XXXXXXX,  XXXXXXX,  XXXXXXX,  KC_LEFT, KC_DOWN,  KC_UP,       KC_RIGHT,   XXXXXXX, 
+      XXXXXXX,  XXXXXXX, XXXXXXX,  XXXXXXX,   XXXXXXX,  XXXXXXX,  XXXXXXX,  XXXXXXX, XXXXXXX,  XXXXXXX,     XXXXXXX,    XXXXXXX, 
+      XXXXXXX,  XXXXXXX, XXXXXXX,  XXXXXXX,   XXXXXXX,  _______,  _______,  XXXXXXX, KC__MUTE, KC__VOLDOWN, KC__VOLUP,  XXXXXXX
+  ),
+
+
+  /* Adjust (Lower + Raise)
+  * ,-----------------------------------------------------------------------------------.
+  * | Reset|Qwerty|      |      |      |      |      |      |      |MIDIof|MIDIon|  Del |
+  * |------+------+------+------+------+-------------+------+------+------+------+------|
+  * |      |      |      |Dvorak|      |AGnorm|AGswap|      |      |Audoff|Aud on|      |
+  * |------+------+------+------+------+------|------+------+------+------+------+------|
+  * |      |      |      |Colemk|      |      |      |      |      |Musoff|Mus on|      |
+  * |------+------+------+------+------+------+------+------+------+------+------+------|
+  * |Plover|      |      |      |      |             |      |      |Voice-|Voice+|      |
+  * `-----------------------------------------------------------------------------------'
+  */
+  [_ADJUST] = LAYOUT_planck_grid(
+      RESET,   QWERTY,  XXXXXXX,   XXXXXXX,   XXXXXXX,  XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,   MI_OFF,   MI_ON,   KC_DEL,
+      XXXXXXX, XXXXXXX, XXXXXXX,   DVORAK,    XXXXXXX,  AG_NORM, AG_SWAP, XXXXXXX, XXXXXXX,   AU_OFF,   AU_ON,   XXXXXXX,
+      XXXXXXX, XXXXXXX, XXXXXXX,   COLEMAK,   XXXXXXX,  XXXXXXX, XXXXXXX, TERM_ON, TERM_OFF,  MU_OFF,   MU_ON,   XXXXXXX,
+      PLOVER,  XXXXXXX, XXXXXXX,   XXXXXXX,   _______,  XXXXXXX, XXXXXXX, _______, XXXXXXX,   MUV_DE,   MUV_IN,  XXXXXXX
+  ),
+
+
+  /* Colemak
+  * ,-----------------------------------------------------------------------------------.
+  * | Tab  |   Q  |   W  |   F  |   P  |   G  |   J  |   L  |   U  |   Y  |   ;  | Bksp |
+  * |------+------+------+------+------+-------------+------+------+------+------+------|
+  * | Esc  |   A  |   R  |   S  |   T  |   D  |   H  |   N  |   E  |   I  |   O  |  "   |
+  * |------+------+------+------+------+------|------+------+------+------+------+------|
+  * | Shift|   Z  |   X  |   C  |   V  |   B  |   K  |   M  |   ,  |   .  |   /  |Enter |
+  * |------+------+------+------+------+------+------+------+------+------+------+------|
+  * | Brite| Ctrl | Alt  | GUI  |Lower |    Space    |Raise | Left | Down |  Up  |Right |
+  * `-----------------------------------------------------------------------------------'
+  */
+  [_COLEMAK] = LAYOUT_planck_grid(
+      KC_TAB,  KC_Q,    KC_W,    KC_F,    KC_P,    KC_G,    KC_J,    KC_L,    KC_U,    KC_Y,    KC_SCLN, KC_BSPC,
+      KC_ESC,  KC_A,    KC_R,    KC_S,    KC_T,    KC_D,    KC_H,    KC_N,    KC_E,    KC_I,    KC_O,    KC_QUOT,
+      KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_K,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, MT(MOD_LSFT, KC_ENT),
+      BACKLIT, KC_LCTL, KC_LALT, KC_LGUI, LOWER,   KC_SPC,  KC_SPC,  RAISE,   KC_LEFT, KC_DOWN, KC_UP,   KC_RGHT
+  ),
+
+
+  /* Dvorak
+  * ,-----------------------------------------------------------------------------------.
+  * | Tab  |   "  |   ,  |   .  |   P  |   Y  |   F  |   G  |   C  |   R  |   L  | Bksp |
+  * |------+------+------+------+------+-------------+------+------+------+------+------|
+  * | Esc  |   A  |   O  |   E  |   U  |   I  |   D  |   H  |   T  |   N  |   S  |  /   |
+  * |------+------+------+------+------+------|------+------+------+------+------+------|
+  * | Shift|   ;  |   Q  |   J  |   K  |   X  |   B  |   M  |   W  |   V  |   Z  |Enter |
+  * |------+------+------+------+------+------+------+------+------+------+------+------|
+  * | Brite| Ctrl | Alt  | GUI  |Lower |    Space    |Raise | Left | Down |  Up  |Right |
+  * `-----------------------------------------------------------------------------------'
+  */
+  [_DVORAK] = LAYOUT_planck_grid(
+      KC_TAB,  KC_QUOT, KC_COMM, KC_DOT,  KC_P,    KC_Y,    KC_F,    KC_G,    KC_C,    KC_R,    KC_L,    KC_BSPC,
+      KC_ESC,  KC_A,    KC_O,    KC_E,    KC_U,    KC_I,    KC_D,    KC_H,    KC_T,    KC_N,    KC_S,    KC_SLSH,
+      KC_LSFT, KC_SCLN, KC_Q,    KC_J,    KC_K,    KC_X,    KC_B,    KC_M,    KC_W,    KC_V,    KC_Z,    MT(MOD_LSFT, KC_ENT),
+      BACKLIT, KC_LCTL, KC_LALT, KC_LGUI, LOWER,   KC_SPC,  KC_SPC,  RAISE,   KC_LEFT, KC_DOWN, KC_UP,   KC_RGHT
+  ),
+
+
+  /* Plover layer (http://opensteno.org)
+  * ,-----------------------------------------------------------------------------------.
+  * |   #  |   #  |   #  |   #  |   #  |   #  |   #  |   #  |   #  |   #  |   #  |   #  |
+  * |------+------+------+------+------+-------------+------+------+------+------+------|
+  * |      |   S  |   T  |   P  |   H  |   *  |   *  |   F  |   P  |   L  |   T  |   D  |
+  * |------+------+------+------+------+------|------+------+------+------+------+------|
+  * |      |   S  |   K  |   W  |   R  |   *  |   *  |   R  |   B  |   G  |   S  |   Z  |
+  * |------+------+------+------+------+------+------+------+------+------+------+------|
+  * | Exit |      |      |   A  |   O  |             |   E  |   U  |      |      |      |
+  * `-----------------------------------------------------------------------------------'
+  */
+
+  [_PLOVER] = LAYOUT_planck_grid(
+      KC_1,    KC_1,    KC_1,    KC_1,    KC_1,    KC_1,    KC_1,    KC_1,    KC_1,    KC_1,    KC_1,    KC_1,
+      XXXXXXX, KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC,
+      XXXXXXX, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT,
+      EXT_PLV, XXXXXXX, XXXXXXX, KC_C,    KC_V,    XXXXXXX, XXXXXXX, KC_N,    KC_M,    XXXXXXX, XXXXXXX, XXXXXXX
+  ),   
+};
+
+#ifdef AUDIO_ENABLE
+  float plover_song[][2]     = SONG(PLOVER_SOUND);
+  float plover_gb_song[][2]  = SONG(PLOVER_GOODBYE_SOUND);
+#endif
+
+uint32_t layer_state_set_user(uint32_t state) {
+  return update_tri_layer_state(state, _LOWER, _RAISE, _ADJUST);
+}
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+  switch (keycode) {
+    case QWERTY:
+      if (record->event.pressed) {
+        set_single_persistent_default_layer(_QWERTY);
+      }
+      return true;
+    case COLEMAK:
+      if (record->event.pressed) {
+        set_single_persistent_default_layer(_COLEMAK);
+      }
+      return true;
+    case DVORAK:
+      if (record->event.pressed) {
+        set_single_persistent_default_layer(_DVORAK);
+      }
+      return true;
+    case BACKLIT:
+      if (record->event.pressed) {
+        register_code(KC_RSFT);
+        #ifdef BACKLIGHT_ENABLE
+          backlight_step();
+        #endif
+        #ifdef KEYBOARD_planck_rev5
+          writePinLow(E6);
+        #endif
+      } else {
+        unregister_code(KC_RSFT);
+        #ifdef KEYBOARD_planck_rev5
+          writePinHigh(E6);
+        #endif
+      }
+      return true;
+    case PLOVER:
+      if (record->event.pressed) {
+        #ifdef AUDIO_ENABLE
+          stop_all_notes();
+          PLAY_SONG(plover_song);
+        #endif
+        layer_off(_RAISE);
+        layer_off(_LOWER);
+        layer_off(_ADJUST);
+        layer_on(_PLOVER);
+        if (!eeconfig_is_enabled()) {
+            eeconfig_init();
+        }
+        keymap_config.raw = eeconfig_read_keymap();
+        keymap_config.nkro = 1;
+        eeconfig_update_keymap(keymap_config.raw);
+      }
+      return true;
+    case EXT_PLV:
+      if (record->event.pressed) {
+        #ifdef AUDIO_ENABLE
+          PLAY_SONG(plover_gb_song);
+        #endif
+        layer_off(_PLOVER);
+      }
+      return true;
+  }
+  return true;
+}
+
+bool muse_mode = false;
+uint8_t last_muse_note = 0;
+uint16_t muse_counter = 0;
+uint8_t muse_offset = 70;
+uint16_t muse_tempo = 50;
+
+void encoder_update(bool clockwise) {
+  if (muse_mode) {
+    if (IS_LAYER_ON(_RAISE)) {
+      if (clockwise) {
+        muse_offset++;
+      } else {
+        muse_offset--;
+      }
+    } else {
+      if (clockwise) {
+        muse_tempo+=1;
+      } else {
+        muse_tempo-=1;
+      }
+    }
+  } else {
+    if (clockwise) {
+      tap_code(KC_PGDN);
+    } else {
+      tap_code(KC_PGUP);
+    }
+  }
+}
+
+void dip_update(uint8_t index, bool active) {
+  switch (index) {
+    case 0:
+      if (active) {
+        #ifdef AUDIO_ENABLE
+          PLAY_SONG(plover_song);
+        #endif
+        layer_on(_ADJUST);
+      } else {
+        #ifdef AUDIO_ENABLE
+          PLAY_SONG(plover_gb_song);
+        #endif
+        layer_off(_ADJUST);
+      }
+      break;
+    case 1:
+      if (active) {
+        muse_mode = true;
+      } else {
+        muse_mode = false;
+        #ifdef AUDIO_ENABLE
+          stop_all_notes();
+        #endif
+      }
+   }
+}
+
+void matrix_scan_user(void) {
+  #ifdef AUDIO_ENABLE
+    if (muse_mode) {
+      if (muse_counter == 0) {
+        uint8_t muse_note = muse_offset + SCALE[muse_clock_pulse()];
+        if (muse_note != last_muse_note) {
+          stop_note(compute_freq_for_midi_note(last_muse_note));
+          play_note(compute_freq_for_midi_note(muse_note), 0xF);
+          last_muse_note = muse_note;
+        }
+      }
+      muse_counter = (muse_counter + 1) % muse_tempo;
+    }
+  #endif
+}
+
+bool music_mask_user(uint16_t keycode) {
+  switch (keycode) {
+    case RAISE:
+    case LOWER:
+      return false;
+    default:
+      return true;
+  }
+}

keyboards/planck/keymaps/smittey/readme.md

@@ -0,0 +1,28 @@
+# Planck Layout created by [Smittey](https://github.com/smittey) 
+
+A layout with a focus around coding, utilising the home row for symbols. There is an additional FN layer and Space function layer
+
+Main - Qwerty with ctrl swapped around and enter changed to be shift on hold
+Lower - Numbers and calculations
+Raise - Symbols
+Adjust - Keyboard settings and layout changers
+FN - Function keys
+Space FN - Navigation and media
+
+## Main
+![Main layer layout](https://i.imgur.com/jRbqGUN.png)
+
+## Lower
+![Lower layer layout](https://i.imgur.com/YmdM1q5.png)
+  
+## Raise
+![Raise layer layout](https://i.imgur.com/BXxOK1S.png)
+
+## Adjust
+![Adjust layer layout](https://i.imgur.com/M6qBaXO.png)
+
+## FN
+![FN layer layout](https://i.imgur.com/1eiUOH1.png)
+
+## Space Function
+![Space function layer layout](https://i.imgur.com/RJMFEdy.png)

keyboards/planck/keymaps/smittey/rules.mk

@@ -0,0 +1 @@
+SRC += muse.c

keyboards/vitamins_included/i2c.c

@@ -1,163 +0,0 @@
-#include <util/twi.h>
-#include <avr/io.h>
-#include <stdlib.h>
-#include <avr/interrupt.h>
-#include <util/twi.h>
-#include <stdbool.h>
-#include "i2c.h"
-
-#ifdef USE_I2C
-
-// Limits the amount of we wait for any one i2c transaction.
-// Since were running SCL line 100kHz (=> 10μs/bit), and each transactions is
-// 9 bits, a single transaction will take around 90μs to complete.
-//
-// (F_CPU/SCL_CLOCK)  =>  # of μC cycles to transfer a bit
-// poll loop takes at least 8 clock cycles to execute
-#define I2C_LOOP_TIMEOUT (9+1)*(F_CPU/SCL_CLOCK)/8
-
-#define BUFFER_POS_INC() (slave_buffer_pos = (slave_buffer_pos+1)%SLAVE_BUFFER_SIZE)
-
-volatile uint8_t i2c_slave_buffer[SLAVE_BUFFER_SIZE];
-
-static volatile uint8_t slave_buffer_pos;
-static volatile bool slave_has_register_set = false;
-
-// Wait for an i2c operation to finish
-inline static
-void i2c_delay(void) {
-  uint16_t lim = 0;
-  while(!(TWCR & (1<<TWINT)) && lim < I2C_LOOP_TIMEOUT)
-    lim++;
-
-  // easier way, but will wait slightly longer
-  // _delay_us(100);
-}
-
-// Setup twi to run at 100kHz
-void i2c_master_init(void) {
-  // no prescaler
-  TWSR = 0;
-  // Set TWI clock frequency to SCL_CLOCK. Need TWBR>10.
-  // Check datasheets for more info.
-  TWBR = ((F_CPU/SCL_CLOCK)-16)/2;
-}
-
-// Start a transaction with the given i2c slave address. The direction of the
-// transfer is set with I2C_READ and I2C_WRITE.
-// returns: 0 => success
-//          1 => error
-uint8_t i2c_master_start(uint8_t address) {
-  TWCR = (1<<TWINT) | (1<<TWEN) | (1<<TWSTA);
-
-  i2c_delay();
-
-  // check that we started successfully
-  if ( (TW_STATUS != TW_START) && (TW_STATUS != TW_REP_START))
-    return 1;
-
-  TWDR = address;
-  TWCR = (1<<TWINT) | (1<<TWEN);
-
-  i2c_delay();
-
-  if ( (TW_STATUS != TW_MT_SLA_ACK) && (TW_STATUS != TW_MR_SLA_ACK) )
-    return 1; // slave did not acknowledge
-  else
-    return 0; // success
-}
-
-
-// Finish the i2c transaction.
-void i2c_master_stop(void) {
-  TWCR = (1<<TWINT) | (1<<TWEN) | (1<<TWSTO);
-
-  uint16_t lim = 0;
-  while(!(TWCR & (1<<TWSTO)) && lim < I2C_LOOP_TIMEOUT)
-    lim++;
-}
-
-// Write one byte to the i2c slave.
-// returns 0 => slave ACK
-//         1 => slave NACK
-uint8_t i2c_master_write(uint8_t data) {
-  TWDR = data;
-  TWCR = (1<<TWINT) | (1<<TWEN);
-
-  i2c_delay();
-
-  // check if the slave acknowledged us
-  return (TW_STATUS == TW_MT_DATA_ACK) ? 0 : 1;
-}
-
-// Read one byte from the i2c slave. If ack=1 the slave is acknowledged,
-// if ack=0 the acknowledge bit is not set.
-// returns: byte read from i2c device
-uint8_t i2c_master_read(int ack) {
-  TWCR = (1<<TWINT) | (1<<TWEN) | (ack<<TWEA);
-
-  i2c_delay();
-  return TWDR;
-}
-
-void i2c_reset_state(void) {
-  TWCR = 0;
-}
-
-void i2c_slave_init(uint8_t address) {
-  TWAR = address << 0; // slave i2c address
-  // TWEN  - twi enable
-  // TWEA  - enable address acknowledgement
-  // TWINT - twi interrupt flag
-  // TWIE  - enable the twi interrupt
-  TWCR = (1<<TWIE) | (1<<TWEA) | (1<<TWINT) | (1<<TWEN);
-}
-
-ISR(TWI_vect);
-
-ISR(TWI_vect) {
-  uint8_t ack = 1;
-  switch(TW_STATUS) {
-    case TW_SR_SLA_ACK:
-      // this device has been addressed as a slave receiver
-      slave_has_register_set = false;
-      break;
-
-    case TW_SR_DATA_ACK:
-      // this device has received data as a slave receiver
-      // The first byte that we receive in this transaction sets the location
-      // of the read/write location of the slaves memory that it exposes over
-      // i2c.  After that, bytes will be written at slave_buffer_pos, incrementing
-      // slave_buffer_pos after each write.
-      if(!slave_has_register_set) {
-        slave_buffer_pos = TWDR;
-        // don't acknowledge the master if this memory loctaion is out of bounds
-        if ( slave_buffer_pos >= SLAVE_BUFFER_SIZE ) {
-          ack = 0;
-          slave_buffer_pos = 0;
-        }
-        slave_has_register_set = true;
-      } else {
-        i2c_slave_buffer[slave_buffer_pos] = TWDR;
-        BUFFER_POS_INC();
-      }
-      break;
-
-    case TW_ST_SLA_ACK:
-    case TW_ST_DATA_ACK:
-      // master has addressed this device as a slave transmitter and is
-      // requesting data.
-      TWDR = i2c_slave_buffer[slave_buffer_pos];
-      BUFFER_POS_INC();
-      break;
-
-    case TW_BUS_ERROR: // something went wrong, reset twi state
-      TWCR = 0;
-    default:
-      break;
-  }
-  // Reset everything, so we are ready for the next TWI interrupt
-  TWCR |= (1<<TWIE) | (1<<TWINT) | (ack<<TWEA) | (1<<TWEN);
-  contacted_by_master = true;
-}
-#endif

keyboards/vitamins_included/i2c.h

@@ -1,50 +0,0 @@
-#ifndef I2C_H
-#define I2C_H
-
-#include <stdint.h>
-#include "split_util.h"
-
-#ifndef F_CPU
-#define F_CPU 16000000UL
-#endif
-
-#define I2C_READ 1
-#define I2C_WRITE 0
-
-#define I2C_ACK 1
-#define I2C_NACK 0
-
-#define SLAVE_BUFFER_SIZE 0x10
-
-// i2c SCL clock frequency
-#define SCL_CLOCK  100000UL
-
-extern volatile uint8_t i2c_slave_buffer[SLAVE_BUFFER_SIZE];
-
-void i2c_master_init(void);
-uint8_t i2c_master_start(uint8_t address);
-void i2c_master_stop(void);
-uint8_t i2c_master_write(uint8_t data);
-uint8_t i2c_master_read(int);
-void i2c_reset_state(void);
-void i2c_slave_init(uint8_t address);
-
-
-static inline unsigned char i2c_start_read(unsigned char addr) {
-  return i2c_master_start((addr << 1) | I2C_READ);
-}
-
-static inline unsigned char i2c_start_write(unsigned char addr) {
-  return i2c_master_start((addr << 1) | I2C_WRITE);
-}
-
-// from SSD1306 scrips
-extern unsigned char i2c_rep_start(unsigned char addr);
-extern void i2c_start_wait(unsigned char addr);
-extern unsigned char i2c_readAck(void);
-extern unsigned char i2c_readNak(void);
-extern unsigned char i2c_read(unsigned char ack);
-
-#define i2c_read(ack)  (ack) ? i2c_readAck() : i2c_readNak();
-
-#endif

keyboards/vitamins_included/matrix.c

@@ -1,503 +0,0 @@
-/*
-Copyright 2012 Jun Wako <wakojun@gmail.com>
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program.  If not, see <http://www.gnu.org/licenses/>.
-*/
-
-/*
- * scan matrix
- */
-#include <stdint.h>
-#include <stdbool.h>
-#include <avr/io.h>
-#include <avr/interrupt.h>
-#include <util/delay.h>
-#include "wait.h"
-#include "print.h"
-#include "debug.h"
-#include "util.h"
-#include "matrix.h"
-#include "split_util.h"
-#include "pro_micro.h"
-#include "config.h"
-#include "timer.h"
-#include <print.h>
-
-#if (defined(RGB_MIDI) | defined(RGBLIGHT_ANIMATIONS)) & defined(RGBLIGHT_ENABLE)
-    #include "rgblight.h"
-#endif
-
-
-#ifdef USE_I2C
-#  include "i2c.h"
-#else // USE_SERIAL
-#  include "serial.h"
-#endif
-
-#ifndef DEBOUNCE
-#   define DEBOUNCE 5
-#endif
-
-#if (DEBOUNCE > 0)
-    static uint16_t debouncing_time;
-    static bool debouncing = false;
-#endif
-
-#if (MATRIX_COLS <= 8)
-#    define print_matrix_header()  print("\nr/c 01234567\n")
-#    define print_matrix_row(row)  print_bin_reverse8(matrix_get_row(row))
-#    define matrix_bitpop(i)       bitpop(matrix[i])
-#    define ROW_SHIFTER ((uint8_t)1)
-#else
-#    error "Currently only supports 8 COLS"
-#endif
-static matrix_row_t matrix_debouncing[MATRIX_ROWS];
-
-#define ERROR_DISCONNECT_COUNT 5
-
-#define ROWS_PER_HAND (MATRIX_ROWS/2)
-
-static uint8_t error_count = 0;
-
-static const uint8_t row_pins[MATRIX_ROWS] = MATRIX_ROW_PINS;
-static const uint8_t col_pins[MATRIX_COLS] = MATRIX_COL_PINS;
-
-/* matrix state(1:on, 0:off) */
-static matrix_row_t matrix[MATRIX_ROWS];
-static matrix_row_t matrix_debouncing[MATRIX_ROWS];
-
-#if (DIODE_DIRECTION == COL2ROW)
-    static void init_cols(void);
-    static bool read_cols_on_row(matrix_row_t current_matrix[], uint8_t current_row);
-    static void unselect_rows(void);
-    static void select_row(uint8_t row);
-    static void unselect_row(uint8_t row);
-#elif (DIODE_DIRECTION == ROW2COL)
-    static void init_rows(void);
-    static bool read_rows_on_col(matrix_row_t current_matrix[], uint8_t current_col);
-    static void unselect_cols(void);
-    static void unselect_col(uint8_t col);
-    static void select_col(uint8_t col);
-#endif
-
-
-__attribute__ ((weak))
-void matrix_init_quantum(void) {
-    matrix_init_kb();
-}
-
-__attribute__ ((weak))
-void matrix_scan_quantum(void) {
-    matrix_scan_kb();
-}
-
-__attribute__ ((weak))
-void matrix_init_kb(void) {
-    matrix_init_user();
-}
-
-__attribute__ ((weak))
-void matrix_scan_kb(void) {
-    matrix_scan_user();
-}
-
-__attribute__ ((weak))
-void matrix_init_user(void) {
-}
-
-__attribute__ ((weak))
-void matrix_scan_user(void) {
-}
-
-inline
-uint8_t matrix_rows(void) {
-    return MATRIX_ROWS;
-}
-
-inline
-uint8_t matrix_cols(void) {
-    return MATRIX_COLS;
-}
-
-bool has_usb(void) {
-    return UDADDR & _BV(ADDEN); // This will return true if a USB connection has been established
-}
-
-void matrix_init(void)
-{
-    // initialize row and col
-#if (DIODE_DIRECTION == COL2ROW)
-    unselect_rows();
-    init_cols();
-#elif (DIODE_DIRECTION == ROW2COL)
-    unselect_cols();
-    init_rows();
-#endif
-
-  TX_RX_LED_INIT;
-
-  // initialize matrix state: all keys off
-  for (uint8_t i=0; i < MATRIX_ROWS; i++) {
-    matrix[i] = 0;
-    matrix_debouncing[i] = 0;
-  }
-
-  #ifdef RGBLIGHT_ENABLE
-    rgblight_init();
-  #endif
-
-  timer_init();
-  #ifdef USE_I2C
-    i2c_slave_init(SLAVE_I2C_ADDRESS);
-  #else
-    serial_slave_init();
-  #endif
-
-  sei();
-
-  matrix_init_quantum();
-  while(!has_usb() || contacted_by_master){
-    matrix_slave_scan();
-  }
-
-  // Set up as master
-  #ifdef USE_I2C
-    i2c_reset_state();
-    i2c_master_init();
-  #else
-    serial_master_init();
-  #endif
-}
-
-uint8_t _matrix_scan(void)
-{
-    int offset = isLeftHand ? 0 : (ROWS_PER_HAND);
-#if (DIODE_DIRECTION == COL2ROW)
-    // Set row, read cols
-    for (uint8_t current_row = 0; current_row < ROWS_PER_HAND; current_row++) {
-#       if (DEBOUNCE > 0)
-            bool matrix_changed = read_cols_on_row(matrix_debouncing+offset, current_row);
-
-            if (matrix_changed) {
-                debouncing = true;
-                debouncing_time = timer_read();
-            }
-
-#       else
-            read_cols_on_row(matrix+offset, current_row);
-#       endif
-
-    }
-
-#elif (DIODE_DIRECTION == ROW2COL)
-    // Set col, read rows
-    for (uint8_t current_col = 0; current_col < MATRIX_COLS; current_col++) {
-#       if (DEBOUNCE > 0)
-            bool matrix_changed = read_rows_on_col(matrix_debouncing+offset, current_col);
-            if (matrix_changed) {
-                debouncing = true;
-                debouncing_time = timer_read();
-            }
-#       else
-             read_rows_on_col(matrix+offset, current_col);
-#       endif
-
-    }
-#endif
-
-#   if (DEBOUNCE > 0)
-        if (debouncing && (timer_elapsed(debouncing_time) > DEBOUNCE)) {
-            for (uint8_t i = 0; i < ROWS_PER_HAND; i++) {
-                matrix[i+offset] = matrix_debouncing[i+offset];
-            }
-            debouncing = false;
-        }
-#   endif
-
-    return 1;
-}
-
-#ifdef USE_I2C
-
-// Get rows from other half over i2c
-int i2c_transaction(void) {
-    int slaveOffset = (isLeftHand) ? (ROWS_PER_HAND) : 0;
-
-    int err = i2c_master_start(SLAVE_I2C_ADDRESS + I2C_WRITE);
-    if (err) goto i2c_error;
-
-    // start of matrix stored at 0x00
-    err = i2c_master_write(0x00);
-    if (err) goto i2c_error;
-
-    // Start read
-    err = i2c_master_start(SLAVE_I2C_ADDRESS + I2C_READ);
-    if (err) goto i2c_error;
-
-    if (!err) {
-        int i;
-        for (i = 0; i < ROWS_PER_HAND-1; ++i) {
-            matrix[slaveOffset+i] = i2c_master_read(I2C_ACK);
-        }
-        matrix[slaveOffset+i] = i2c_master_read(I2C_NACK);
-        i2c_master_stop();
-    } else {
-i2c_error: // the cable is disconnceted, or something else went wrong
-        i2c_reset_state();
-        return err;
-    }
-
-    return 0;
-}
-
-#else // USE_SERIAL
-
-int serial_transaction(void) {
-    int slaveOffset = (isLeftHand) ? (ROWS_PER_HAND) : 0;
-
-    if (serial_update_buffers()) {
-        return 1;
-    }
-
-    for (int i = 0; i < ROWS_PER_HAND; ++i) {
-        matrix[slaveOffset+i] = serial_slave_buffer[i];
-    }
-    return 0;
-}
-#endif
-
-uint8_t matrix_scan(void)
-{
-    uint8_t ret = _matrix_scan();
-
-#ifdef USE_I2C
-    if( i2c_transaction() ) {
-#else // USE_SERIAL
-    if( serial_transaction() ) {
-#endif
-        // turn on the indicator led when halves are disconnected
-        TXLED1;
-
-        error_count++;
-
-        if (error_count > ERROR_DISCONNECT_COUNT) {
-            // reset other half if disconnected
-            int slaveOffset = (isLeftHand) ? (ROWS_PER_HAND) : 0;
-            for (int i = 0; i < ROWS_PER_HAND; ++i) {
-                matrix[slaveOffset+i] = 0;
-            }
-        }
-    } else {
-        // turn off the indicator led on no error
-        TXLED0;
-        error_count = 0;
-    }
-    matrix_scan_quantum();
-    return ret;
-}
-
-void matrix_slave_scan(void) {
-  #if defined(RGBLIGHT_ANIMATIONS) & defined(RGBLIGHT_ENABLE)
-    rgblight_task();
-  #endif
-  _matrix_scan();
-
-  int offset = (isLeftHand) ? 0 : ROWS_PER_HAND;
-
-#ifdef USE_I2C
-    for (int i = 0; i < ROWS_PER_HAND; ++i) {
-        i2c_slave_buffer[i] = matrix[offset+i];
-    }
-#else // USE_SERIAL
-    for (int i = 0; i < ROWS_PER_HAND; ++i) {
-        serial_slave_buffer[i] = matrix[offset+i];
-    }
-#endif
-}
-
-bool matrix_is_modified(void)
-{
-    if (debouncing) return false;
-    return true;
-}
-
-inline
-bool matrix_is_on(uint8_t row, uint8_t col)
-{
-    return (matrix[row] & ((matrix_row_t)1<<col));
-}
-
-inline
-matrix_row_t matrix_get_row(uint8_t row)
-{
-    return matrix[row];
-}
-
-void matrix_print(void)
-{
-    print("\nr/c 0123456789ABCDEF\n");
-    for (uint8_t row = 0; row < MATRIX_ROWS; row++) {
-        phex(row); print(": ");
-        pbin_reverse16(matrix_get_row(row));
-        print("\n");
-    }
-}
-
-uint8_t matrix_key_count(void)
-{
-    uint8_t count = 0;
-    for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
-        count += bitpop16(matrix[i]);
-    }
-    return count;
-}
-
-#if (DIODE_DIRECTION == COL2ROW)
-
-static void init_cols(void)
-{
-    for(uint8_t x = 0; x < MATRIX_COLS; x++) {
-        uint8_t pin = col_pins[x];
-        _SFR_IO8((pin >> 4) + 1) &= ~_BV(pin & 0xF); // IN
-        _SFR_IO8((pin >> 4) + 2) |=  _BV(pin & 0xF); // HI
-    }
-}
-
-static bool read_cols_on_row(matrix_row_t current_matrix[], uint8_t current_row)
-{
-    // Store last value of row prior to reading
-    matrix_row_t last_row_value = current_matrix[current_row];
-
-    // Clear data in matrix row
-    current_matrix[current_row] = 0;
-
-    // Select row and wait for row selecton to stabilize
-    select_row(current_row);
-    wait_us(30);
-
-    // For each col...
-    for(uint8_t col_index = 0; col_index < MATRIX_COLS; col_index++) {
-
-        // Select the col pin to read (active low)
-        uint8_t pin = col_pins[col_index];
-        uint8_t pin_state = (_SFR_IO8(pin >> 4) & _BV(pin & 0xF));
-
-        // Populate the matrix row with the state of the col pin
-        current_matrix[current_row] |=  pin_state ? 0 : (ROW_SHIFTER << col_index);
-    }
-
-    // Unselect row
-    unselect_row(current_row);
-
-    return (last_row_value != current_matrix[current_row]);
-}
-
-static void select_row(uint8_t row)
-{
-    uint8_t pin = row_pins[row];
-    _SFR_IO8((pin >> 4) + 1) |=  _BV(pin & 0xF); // OUT
-    _SFR_IO8((pin >> 4) + 2) &= ~_BV(pin & 0xF); // LOW
-}
-
-static void unselect_row(uint8_t row)
-{
-    uint8_t pin = row_pins[row];
-    _SFR_IO8((pin >> 4) + 1) &= ~_BV(pin & 0xF); // IN
-    _SFR_IO8((pin >> 4) + 2) |=  _BV(pin & 0xF); // HI
-}
-
-static void unselect_rows(void)
-{
-    for(uint8_t x = 0; x < ROWS_PER_HAND; x++) {
-        uint8_t pin = row_pins[x];
-        _SFR_IO8((pin >> 4) + 1) &= ~_BV(pin & 0xF); // IN
-        _SFR_IO8((pin >> 4) + 2) |=  _BV(pin & 0xF); // HI
-    }
-}
-
-#elif (DIODE_DIRECTION == ROW2COL)
-
-static void init_rows(void)
-{
-    for(uint8_t x = 0; x < ROWS_PER_HAND; x++) {
-        uint8_t pin = row_pins[x];
-        _SFR_IO8((pin >> 4) + 1) &= ~_BV(pin & 0xF); // IN
-        _SFR_IO8((pin >> 4) + 2) |=  _BV(pin & 0xF); // HI
-    }
-}
-
-static bool read_rows_on_col(matrix_row_t current_matrix[], uint8_t current_col)
-{
-    bool matrix_changed = false;
-
-    // Select col and wait for col selecton to stabilize
-    select_col(current_col);
-    wait_us(30);
-
-    // For each row...
-    for(uint8_t row_index = 0; row_index < ROWS_PER_HAND; row_index++)
-    {
-
-        // Store last value of row prior to reading
-        matrix_row_t last_row_value = current_matrix[row_index];
-
-        // Check row pin state
-        if ((_SFR_IO8(row_pins[row_index] >> 4) & _BV(row_pins[row_index] & 0xF)) == 0)
-        {
-            // Pin LO, set col bit
-            current_matrix[row_index] |= (ROW_SHIFTER << current_col);
-        }
-        else
-        {
-            // Pin HI, clear col bit
-            current_matrix[row_index] &= ~(ROW_SHIFTER << current_col);
-        }
-
-        // Determine if the matrix changed state
-        if ((last_row_value != current_matrix[row_index]) && !(matrix_changed))
-        {
-            matrix_changed = true;
-        }
-    }
-
-    // Unselect col
-    unselect_col(current_col);
-
-    return matrix_changed;
-}
-
-static void select_col(uint8_t col)
-{
-    uint8_t pin = col_pins[col];
-    _SFR_IO8((pin >> 4) + 1) |=  _BV(pin & 0xF); // OUT
-    _SFR_IO8((pin >> 4) + 2) &= ~_BV(pin & 0xF); // LOW
-}
-
-static void unselect_col(uint8_t col)
-{
-    uint8_t pin = col_pins[col];
-    _SFR_IO8((pin >> 4) + 1) &= ~_BV(pin & 0xF); // IN
-    _SFR_IO8((pin >> 4) + 2) |=  _BV(pin & 0xF); // HI
-}
-
-static void unselect_cols(void)
-{
-    for(uint8_t x = 0; x < MATRIX_COLS; x++) {
-        uint8_t pin = col_pins[x];
-        _SFR_IO8((pin >> 4) + 1) &= ~_BV(pin & 0xF); // IN
-        _SFR_IO8((pin >> 4) + 2) |=  _BV(pin & 0xF); // HI
-    }
-}
-
-#endif

keyboards/vitamins_included/rev1/config.h

@@ -20,7 +20,10 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #include "config_common.h"
 
+#define SPLIT_USB_DETECT
+
 #define EE_HANDS
+#define SOFT_SERIAL_PIN D0
 
 /* USB Device descriptor parameters */
 #define DEVICE_VER      0x0001

keyboards/vitamins_included/rev1/rules.mk

@@ -1,9 +1,2 @@
-SRC += matrix.c \
-	   split_util.c \
-	   ssd1306.c
-
-QUANTUM_LIB_SRC += i2c.c \
-	   serial.c \
-
-CUSTOM_MATRIX = yes
+SPLIT_KEYBOARD = yes
 BOOTLOADER = caterina

keyboards/vitamins_included/serial.c

@@ -1,229 +0,0 @@
-/*
- * WARNING: be careful changing this code, it is very timing dependent
- */
-
-#ifndef F_CPU
-#define F_CPU 16000000
-#endif
-
-#include <avr/io.h>
-#include <avr/interrupt.h>
-#include <util/delay.h>
-#include <stdbool.h>
-#include "serial.h"
-
-#ifndef USE_I2C
-
-// Serial pulse period in microseconds. Its probably a bad idea to lower this
-// value.
-#define SERIAL_DELAY 24
-
-uint8_t volatile serial_slave_buffer[SERIAL_SLAVE_BUFFER_LENGTH] = {0};
-uint8_t volatile serial_master_buffer[SERIAL_MASTER_BUFFER_LENGTH] = {0};
-
-#define SLAVE_DATA_CORRUPT (1<<0)
-volatile uint8_t status = 0;
-
-inline static
-void serial_delay(void) {
-  _delay_us(SERIAL_DELAY);
-}
-
-inline static
-void serial_output(void) {
-  SERIAL_PIN_DDR |= SERIAL_PIN_MASK;
-}
-
-// make the serial pin an input with pull-up resistor
-inline static
-void serial_input(void) {
-  SERIAL_PIN_DDR  &= ~SERIAL_PIN_MASK;
-  SERIAL_PIN_PORT |= SERIAL_PIN_MASK;
-}
-
-inline static
-uint8_t serial_read_pin(void) {
-  return !!(SERIAL_PIN_INPUT & SERIAL_PIN_MASK);
-}
-
-inline static
-void serial_low(void) {
-  SERIAL_PIN_PORT &= ~SERIAL_PIN_MASK;
-}
-
-inline static
-void serial_high(void) {
-  SERIAL_PIN_PORT |= SERIAL_PIN_MASK;
-}
-
-void serial_master_init(void) {
-  serial_output();
-  serial_high();
-}
-
-void serial_slave_init(void) {
-  serial_input();
-
-  // Enable INT0
-  EIMSK |= _BV(INT0);
-  // Trigger on falling edge of INT0
-  EICRA &= ~(_BV(ISC00) | _BV(ISC01));
-}
-
-// Used by the master to synchronize timing with the slave.
-static
-void sync_recv(void) {
-  serial_input();
-  // This shouldn't hang if the slave disconnects because the
-  // serial line will float to high if the slave does disconnect.
-  while (!serial_read_pin());
-  serial_delay();
-}
-
-// Used by the slave to send a synchronization signal to the master.
-static
-void sync_send(void) {
-  serial_output();
-
-  serial_low();
-  serial_delay();
-
-  serial_high();
-}
-
-// Reads a byte from the serial line
-static
-uint8_t serial_read_byte(void) {
-  uint8_t byte = 0;
-  serial_input();
-  for ( uint8_t i = 0; i < 8; ++i) {
-    byte = (byte << 1) | serial_read_pin();
-    serial_delay();
-    _delay_us(1);
-  }
-
-  return byte;
-}
-
-// Sends a byte with MSB ordering
-static
-void serial_write_byte(uint8_t data) {
-  uint8_t b = 8;
-  serial_output();
-  while( b-- ) {
-    if(data & (1 << b)) {
-      serial_high();
-    } else {
-      serial_low();
-    }
-    serial_delay();
-  }
-}
-
-// interrupt handle to be used by the slave device
-ISR(SERIAL_PIN_INTERRUPT) {
-  sync_send();
-
-  uint8_t checksum = 0;
-  for (int i = 0; i < SERIAL_SLAVE_BUFFER_LENGTH; ++i) {
-    serial_write_byte(serial_slave_buffer[i]);
-    sync_send();
-    checksum += serial_slave_buffer[i];
-  }
-  serial_write_byte(checksum);
-  sync_send();
-
-  // wait for the sync to finish sending
-  serial_delay();
-
-  // read the middle of pulses
-  _delay_us(SERIAL_DELAY/2);
-
-  uint8_t checksum_computed = 0;
-  for (int i = 0; i < SERIAL_MASTER_BUFFER_LENGTH; ++i) {
-    serial_master_buffer[i] = serial_read_byte();
-    sync_send();
-    checksum_computed += serial_master_buffer[i];
-  }
-  uint8_t checksum_received = serial_read_byte();
-  sync_send();
-
-  serial_input(); // end transaction
-
-  if ( checksum_computed != checksum_received ) {
-    status |= SLAVE_DATA_CORRUPT;
-  } else {
-    status &= ~SLAVE_DATA_CORRUPT;
-  }
-  contacted_by_master = true;
-}
-
-inline
-bool serial_slave_DATA_CORRUPT(void) {
-  return status & SLAVE_DATA_CORRUPT;
-}
-
-// Copies the serial_slave_buffer to the master and sends the
-// serial_master_buffer to the slave.
-//
-// Returns:
-// 0 => no error
-// 1 => slave did not respond
-int serial_update_buffers(void) {
-  // this code is very time dependent, so we need to disable interrupts
-  cli();
-
-  // signal to the slave that we want to start a transaction
-  serial_output();
-  serial_low();
-  _delay_us(1);
-
-  // wait for the slaves response
-  serial_input();
-  serial_high();
-  _delay_us(SERIAL_DELAY);
-
-  // check if the slave is present
-  if (serial_read_pin()) {
-    // slave failed to pull the line low, assume not present
-    sei();
-    return 1;
-  }
-
-  // if the slave is present syncronize with it
-  sync_recv();
-
-  uint8_t checksum_computed = 0;
-  // receive data from the slave
-  for (int i = 0; i < SERIAL_SLAVE_BUFFER_LENGTH; ++i) {
-    serial_slave_buffer[i] = serial_read_byte();
-    sync_recv();
-    checksum_computed += serial_slave_buffer[i];
-  }
-  uint8_t checksum_received = serial_read_byte();
-  sync_recv();
-
-  if (checksum_computed != checksum_received) {
-    sei();
-    return 1;
-  }
-
-  uint8_t checksum = 0;
-  // send data to the slave
-  for (int i = 0; i < SERIAL_MASTER_BUFFER_LENGTH; ++i) {
-    serial_write_byte(serial_master_buffer[i]);
-    sync_recv();
-    checksum += serial_master_buffer[i];
-  }
-  serial_write_byte(checksum);
-  sync_recv();
-
-  // always, release the line when not in use
-  serial_output();
-  serial_high();
-
-  sei();
-  return 0;
-}
-
-#endif

keyboards/vitamins_included/serial.h

@@ -1,25 +0,0 @@
-#pragma once
-
-#include "config.h"
-#include <stdbool.h>
-#include "split_util.h"
-
-/* TODO:  some defines for interrupt setup */
-#define SERIAL_PIN_DDR DDRD
-#define SERIAL_PIN_PORT PORTD
-#define SERIAL_PIN_INPUT PIND
-#define SERIAL_PIN_MASK _BV(PD0)
-#define SERIAL_PIN_INTERRUPT INT0_vect
-
-#define SERIAL_SLAVE_BUFFER_LENGTH MATRIX_ROWS/2
-#define SERIAL_MASTER_BUFFER_LENGTH 1
-
-// Buffers for master - slave communication
-extern volatile uint8_t serial_slave_buffer[SERIAL_SLAVE_BUFFER_LENGTH];
-extern volatile uint8_t serial_master_buffer[SERIAL_MASTER_BUFFER_LENGTH];
-
-void serial_master_init(void);
-void serial_slave_init(void);
-int serial_update_buffers(void);
-bool serial_slave_data_corrupt(void);
-

keyboards/vitamins_included/split_util.c

@@ -1,28 +0,0 @@
-#include <avr/io.h>
-#include <avr/wdt.h>
-#include <avr/power.h>
-#include <avr/interrupt.h>
-#include <util/delay.h>
-#include <avr/eeprom.h>
-#include "split_util.h"
-#include "matrix.h"
-#include "keyboard.h"
-#include "config.h"
-#include "timer.h"
-#include "debug.h"
-
-volatile bool isLeftHand = true;
-volatile bool contacted_by_master = false;
-
-bool is_rev2(void) // Input with pullup, if rev2, pin is pulled down with 220R resistor.
-{
-  setPinInputHigh(B5);
-  bool rev2 = !readPin(B5);
-  setPinInput(B5);
-  return rev2;
-}
-
-// this code runs before the usb and keyboard is initialized
-void matrix_setup(void) {
-  isLeftHand = eeprom_read_byte(EECONFIG_HANDEDNESS);
-}

keyboards/vitamins_included/split_util.h

@@ -1,16 +0,0 @@
-#pragma once
-
-#include <stdbool.h>
-#include "eeconfig.h"
-#include "quantum.h"
-
-#define SLAVE_I2C_ADDRESS           0x32
-
-extern volatile bool isLeftHand;
-extern volatile bool contacted_by_master;
-
-bool has_usb(void);
-bool is_rev2(void);
-
-// slave version of matix scan, defined in matrix.c
-void matrix_slave_scan(void);

quantum/split_common/split_util.c

@@ -32,6 +32,12 @@ bool waitForUsb(void) {
         }
         wait_ms(100);
     }
+
+#if defined(__AVR__)
+    // Avoid NO_USB_STARTUP_CHECK - Disable USB as the previous checks seem to enable it somehow
+    (USBCON &= ~(_BV(USBE) | _BV(OTGPADE)));
+#endif
+
     return false;
 }
 

util/linux_install.sh

@@ -77,6 +77,7 @@ elif grep ID /etc/os-release | grep -q 'arch\|manjaro'; then
 		gcc \
 		git \
 		python \
+		python-pip \
 		unzip \
 		wget \
 		zip
@@ -213,4 +214,4 @@ else
 fi
 
 # Global install tasks
-pip3 install -r ${util_dir}/../requirements.txt
+pip3 install --user -r ${util_dir}/../requirements.txt