New and improved lock LED callbacks (#7215)

* New and improved lock LED callbacks

* Include stdbool

* Update documentation

* Use full function signatures and add keyboard-level example

.travis.yml

@@ -16,6 +16,7 @@ install:
   - npm install -g moxygen
 script:
   - git rev-parse --short HEAD
+  - git diff --name-only HEAD $TRAVIS_BRANCH
   - bash util/travis_test.sh
   - bash util/travis_build.sh
   - bash util/travis_docs.sh

Makefile

@@ -558,10 +558,10 @@ endef
 	if ! python3 --version 1> /dev/null 2>&1; then printf "$(MSG_PYTHON_MISSING)"; fi
 	# Check if the submodules are dirty, and display a warning if they are
 ifndef SKIP_GIT
-	if [ ! -e lib/chibios ]; then git submodule sync lib/chibios && git submodule update --depth 1 --init lib/chibios; fi
-	if [ ! -e lib/chibios-contrib ]; then git submodule sync lib/chibios-contrib && git submodule update --depth 1 --init lib/chibios-contrib; fi
-	if [ ! -e lib/ugfx ]; then git submodule sync lib/ugfx && git submodule update --depth 1 --init lib/ugfx; fi
-	if [ ! -e lib/lufa ]; then git submodule sync lib/lufa && git submodule update --depth 1 --init lib/lufa; fi
+	if [ ! -e lib/chibios ]; then git submodule sync lib/chibios && git submodule update --depth 50 --init lib/chibios; fi
+	if [ ! -e lib/chibios-contrib ]; then git submodule sync lib/chibios-contrib && git submodule update --depth 50 --init lib/chibios-contrib; fi
+	if [ ! -e lib/ugfx ]; then git submodule sync lib/ugfx && git submodule update --depth 50 --init lib/ugfx; fi
+	if [ ! -e lib/lufa ]; then git submodule sync lib/lufa && git submodule update --depth 50 --init lib/lufa; fi
 	git submodule status --recursive 2>/dev/null | \
 	while IFS= read -r x; do \
 		case "$$x" in \

common_features.mk

@@ -407,8 +407,12 @@ ifeq ($(strip $(SPACE_CADET_ENABLE)), yes)
   OPT_DEFS += -DSPACE_CADET_ENABLE
 endif
 
-
 ifeq ($(strip $(DIP_SWITCH_ENABLE)), yes)
   SRC += $(QUANTUM_DIR)/dip_switch.c
   OPT_DEFS += -DDIP_SWITCH_ENABLE
 endif
+
+ifeq ($(strip $(DYNAMIC_MACRO_ENABLE)), yes)
+    SRC += $(QUANTUM_DIR)/process_keycode/process_dynamic_macro.c
+    OPT_DEFS += -DDYNAMIC_MACRO_ENABLE
+endif

docs/config_options.md

@@ -348,7 +348,8 @@ Use these to enable or disable building certain features. The more you have enab
 * `NO_USB_STARTUP_CHECK`
   * Disables usb suspend check after keyboard startup. Usually the keyboard waits for the host to wake it up before any tasks are performed. This is useful for split keyboards as one half will not get a wakeup call but must send commands to the master.
 * `LINK_TIME_OPTIMIZATION_ENABLE`
-  = Enables Link Time Optimization (`LTO`) when compiling the keyboard.  This makes the process take longer, but can significantly reduce the compiled size (and since the firmware is small, the added time is not noticable).  However, this will automatically disable the old Macros and Functions features automatically, as these break when `LTO` is enabled.  It does this by automatically defining `NO_ACTION_MACRO` and `NO_ACTION_FUNCTION`
+  * Enables Link Time Optimization (`LTO`) when compiling the keyboard.  This makes the process take longer, but can significantly reduce the compiled size (and since the firmware is small, the added time is not noticeable).  However, this will automatically disable the old Macros and Functions features automatically, as these break when `LTO` is enabled.  It does this by automatically defining `NO_ACTION_MACRO` and `NO_ACTION_FUNCTION`
+  * Alternatively, you can use `LTO_ENABLE` instead of `LINK_TIME_OPTIMIZATION_ENABLE`. 
 
 ## USB Endpoint Limitations
 

docs/custom_quantum_functions.md

@@ -90,68 +90,110 @@ keyrecord_t record {
 
 # LED Control
 
-QMK provides methods to read the 5 LEDs defined as part of the HID spec:
+QMK provides methods to read 5 of the LEDs defined in the HID spec:
 
-* `USB_LED_NUM_LOCK`
-* `USB_LED_CAPS_LOCK`
-* `USB_LED_SCROLL_LOCK`
-* `USB_LED_COMPOSE`
-* `USB_LED_KANA`
+* Num Lock
+* Caps Lock
+* Scroll Lock
+* Compose
+* Kana
 
-These five constants correspond to the positional bits of the host LED state.
-There are two ways to get the host LED state:
+There are two ways to get the lock LED state:
 
-* by implementing `led_set_user()`
-* by calling `host_keyboard_leds()`
+* by implementing `bool led_update_kb(led_t led_state)` or `_user(led_t led_state)`; or
+* by calling `led_t host_keyboard_led_state()`
 
-## `led_set_user()`
+!> `host_keyboard_led_state()` may already reflect a new value before `led_update_user()` is called.
 
-This function will be called when the state of one of those 5 LEDs changes. It receives the LED state as a parameter.
-Use the `IS_LED_ON(usb_led, led_name)` and `IS_LED_OFF(usb_led, led_name)` macros to check the LED status.
+Two more deprecated functions exist that provide the LED state as a `uint8_t`:
 
-!> `host_keyboard_leds()` may already reflect a new value before `led_set_user()` is called.
+* `uint8_t led_set_kb(uint8_t usb_led)` and `_user(uint8_t usb_led)`
+* `uint8_t host_keyboard_leds()`
 
-### Example `led_set_user()` Implementation
+## `led_update_user()`
+
+This function will be called when the state of one of those 5 LEDs changes. It receives the LED state as a struct parameter.
+
+You must return either `true` or `false` from this function, depending on whether you want to override the keyboard-level implementation.
+
+?> Because the `led_set_*` functions return `void` instead of `bool`, they do not allow for overriding the keyboard LED control, and thus it's recommended to use `led_update_*` instead.
+
+### Example `led_update_kb()` Implementation
 
 ```c
-void led_set_user(uint8_t usb_led) {
-    if (IS_LED_ON(usb_led, USB_LED_NUM_LOCK)) {
-        writePinLow(B0);
-    } else {
-        writePinHigh(B0);
-    }
-    if (IS_LED_ON(usb_led, USB_LED_CAPS_LOCK)) {
-        writePinLow(B1);
-    } else {
-        writePinHigh(B1);
-    }
-    if (IS_LED_ON(usb_led, USB_LED_SCROLL_LOCK)) {
-        writePinLow(B2);
-    } else {
-        writePinHigh(B2);
-    }
-    if (IS_LED_ON(usb_led, USB_LED_COMPOSE)) {
-        writePinLow(B3);
-    } else {
-        writePinHigh(B3);
-    }
-    if (IS_LED_ON(usb_led, USB_LED_KANA)) {
-        writePinLow(B4);
-    } else {
-        writePinHigh(B4);
+bool led_update_kb(led_t led_state) {
+    if(led_update_user(led_state)) {
+        if (led_state.num_lock) {
+            writePinLow(B0);
+        } else {
+            writePinHigh(B0);
+        }
+        if (led_state.caps_lock) {
+            writePinLow(B1);
+        } else {
+            writePinHigh(B1);
+        }
+        if (led_state.scroll_lock) {
+            writePinLow(B2);
+        } else {
+            writePinHigh(B2);
+        }
+        if (led_state.compose) {
+            writePinLow(B3);
+        } else {
+            writePinHigh(B3);
+        }
+        if (led_state.kana) {
+            writePinLow(B4);
+        } else {
+            writePinHigh(B4);
+        }
+        return true;
     }
 }
 ```
 
-### `led_set_*` Function Documentation
+### Example `led_update_user()` Implementation
 
-* Keyboard/Revision: `void led_set_kb(uint8_t usb_led)`
-* Keymap: `void led_set_user(uint8_t usb_led)`
+```c
+bool led_update_user(led_t led_state) {
+    if (led_state.num_lock) {
+        writePinLow(B0);
+    } else {
+        writePinHigh(B0);
+    }
+    if (led_state.caps_lock) {
+        writePinLow(B1);
+    } else {
+        writePinHigh(B1);
+    }
+    if (led_state.scroll_lock) {
+        writePinLow(B2);
+    } else {
+        writePinHigh(B2);
+    }
+    if (led_state.compose) {
+        writePinLow(B3);
+    } else {
+        writePinHigh(B3);
+    }
+    if (led_state.kana) {
+        writePinLow(B4);
+    } else {
+        writePinHigh(B4);
+    }
+    return true;
+}
+```
 
-## `host_keyboard_leds()`
+### `led_update_*` Function Documentation
 
-Call this function to get the last received LED state. This is useful for reading the LED state outside `led_set_*`, e.g. in [`matrix_scan_user()`](#matrix-scanning-code).
-For convenience, you can use the `IS_HOST_LED_ON(led_name)` and `IS_HOST_LED_OFF(led_name)` macros instead of calling and checking `host_keyboard_leds()` directly.
+* Keyboard/Revision: `bool led_update_kb(led_t led_state)`
+* Keymap: `bool led_update_user(led_t led_state)`
+
+## `host_keyboard_led_state()`
+
+Call this function to get the last received LED state as a `led_t`. This is useful for reading the LED state outside `led_update_*`, e.g. in [`matrix_scan_user()`](#matrix-scanning-code).
 
 ## Setting Physical LED State
 

docs/feature_dynamic_macros.md

@@ -4,51 +4,45 @@ QMK supports temporary macros created on the fly. We call these Dynamic Macros.
 
 You can store one or two macros and they may have a combined total of 128 keypresses. You can increase this size at the cost of RAM.
 
-To enable them, first add a new element to the end of your `keycodes` enum — `DYNAMIC_MACRO_RANGE`:
+To enable them, first include `DYNAMIC_MACRO_ENABLE = yes` in your `rules.mk`. Then, add the following keys to your keymap:
 
-```c
-enum keycodes {
-	QWERTY = SAFE_RANGE,
-	COLEMAK,
-	DVORAK,
-	PLOVER,
-	LOWER,
-	RAISE,
-	BACKLIT,
-	EXT_PLV,
-	DYNAMIC_MACRO_RANGE,
-};
-```
+|Key               |Alias     |Description                                        |
+|------------------|----------|---------------------------------------------------|
+|`DYN_REC_START1`  |`DM_REC1` |Start recording Macro 1                            |
+|`DYN_REC_START2`  |`DM_REC2` |Start recording Macro 2                            |
+|`DYN_MACRO_PLAY1` |`DM_PLY1` |Replay Macro 1                                     |
+|`DYN_MACRO_PLAY2` |`DM_PLY2` |Replay Macro 2                                     |
+|`DYN_REC_STOP`    |`DM_RSTP` |Finish the macro that is currently being recorded. |
 
-Your `keycodes` enum may have a slightly different name. You must add `DYNAMIC_MACRO_RANGE` as the last element because `dynamic_macros.h` will add some more keycodes after it.
+That should be everything necessary. 
 
-Below it, include the `dynamic_macro.h` header:
+To start recording the macro, press either `DYN_REC_START1` or `DYN_REC_START2`. 
 
-```c
-	#include "dynamic_macro.h"`
-```
+To finish the recording, press the `DYN_REC_STOP` layer button. 
 
-Add the following keys to your keymap:
+To replay the macro, press either `DYN_MACRO_PLAY1` or `DYN_MACRO_PLAY2`.
 
-* `DYN_REC_START1` — start recording the macro 1,
-* `DYN_REC_START2` — start recording the macro 2,
-* `DYN_MACRO_PLAY1` — replay the macro 1,
-* `DYN_MACRO_PLAY2` — replay the macro 2,
-* `DYN_REC_STOP` — finish the macro that is currently being recorded.
+It is possible to replay a macro as part of a macro. It's ok to replay macro 2 while recording macro 1 and vice versa but never create recursive macros i.e. macro 1 that replays macro 1. If you do so and the keyboard will get unresponsive, unplug the keyboard and plug it again.  You can disable this completly by defining `DYNAMIC_MACRO_NO_NESTING`  in your `config.h` file.
 
-Add the following code to the very beginning of your `process_record_user()` function:
+?> For the details about the internals of the dynamic macros, please read the comments in the `process_dynamic_macro.h` and `process_dynamic_macro.c` files.
 
-```c
-	if (!process_record_dynamic_macro(keycode, record)) {
-		return false;
-	}
-```
+## Customization 
 
-That should be everything necessary. To start recording the macro, press either `DYN_REC_START1` or `DYN_REC_START2`. To finish the recording, press the `DYN_REC_STOP` layer button. To replay the macro, press either `DYN_MACRO_PLAY1` or `DYN_MACRO_PLAY2`.
+There are a number of options added that should allow some additional degree of customization
 
-Note that it's possible to replay a macro as part of a macro. It's ok to replay macro 2 while recording macro 1 and vice versa but never create recursive macros i.e. macro 1 that replays macro 1. If you do so and the keyboard will get unresponsive, unplug the keyboard and plug it again.
+|Define                      |Default         |Description                                                                                                      |
+|----------------------------|----------------|-----------------------------------------------------------------------------------------------------------------|
+|`DYNAMIC_MACRO_SIZE`        |128             |Sets the amount of memory that Dynamic Macros can use. This is a limited resource, dependent on the controller.  |
+|`DYNAMIC_MACRO_USER_CALL`   |*Not defined*   |Defining this falls back to using the user `keymap.c` file to trigger the macro behavior.                        |
+|`DYNAMIC_MACRO_NO_NESTING`  |*Not Defined*   |Defining this disables the ability to call a macro from another macro (nested macros).                           | 
 
-For users of the earlier versions of dynamic macros: It is still possible to finish the macro recording using just the layer modifier used to access the dynamic macro keys, without a dedicated `DYN_REC_STOP` key. If you want this behavior back, use the following snippet instead of the one above:
+
+If the LEDs start blinking during the recording with each keypress, it means there is no more space for the macro in the macro buffer. To fit the macro in, either make the other macro shorter (they share the same buffer) or increase the buffer size by adding the `DYNAMIC_MACRO_SIZE` define in your `config.h` (default value: 128; please read the comments for it in the header).
+
+
+### DYNAMIC_MACRO_USER_CALL
+
+For users of the earlier versions of dynamic macros: It is still possible to finish the macro recording using just the layer modifier used to access the dynamic macro keys, without a dedicated `DYN_REC_STOP` key. If you want this behavior back, add `#define DYNAMIC_MACRO_USER_CALL` to your `config.h` and insert the following snippet at the beginning of your `process_record_user()` function:
 
 ```c
 	uint16_t macro_kc = (keycode == MO(_DYN) ? DYN_REC_STOP : keycode);
@@ -58,6 +52,15 @@ For users of the earlier versions of dynamic macros: It is still possible to fin
 	}
 ```
 
-If the LEDs start blinking during the recording with each keypress, it means there is no more space for the macro in the macro buffer. To fit the macro in, either make the other macro shorter (they share the same buffer) or increase the buffer size by setting the `DYNAMIC_MACRO_SIZE` preprocessor macro (default value: 128; please read the comments for it in the header).
+### User Hooks
 
-For the details about the internals of the dynamic macros, please read the comments in the `dynamic_macro.h` header.
+There are a number of hooks that you can use to add custom functionality and feedback options to Dynamic Macro feature.  This allows for some additional degree of customization. 
+
+Note, that direction indicates which macro it is, with `1` being Macro 1, `-1` being Macro 2, and 0 being no macro. 
+
+* `dynamic_macro_record_start_user(void)` - Triggered when you start recording a macro.
+* `dynamic_macro_play_user(int8_t direction)` - Triggered when you play back a macro.
+* `dynamic_macro_record_key_user(int8_t direction, keyrecord_t *record)` - Triggered on each keypress while recording a macro.
+* `dynamic_macro_record_end_user(int8_t direction)` - Triggered when the macro recording is stopped. 
+
+Additionally, you can call `dynamic_macro_led_blink()` to flash the backlights if that feature is enabled. 

docs/keycodes.md

@@ -297,6 +297,16 @@ This is a reference only. Each group of keys links to the page documenting their
 |`OUT_USB` |USB only                                      |
 |`OUT_BT`  |Bluetooth only                                |
 
+## [Dynamic Macros](feature_dynamic_macros.md)
+
+|Key              |Alias    |Description                                       |
+|-----------------|---------|--------------------------------------------------|
+|`DYN_REC_START1` |`DM_REC1`|Start recording Macro 1                           |
+|`DYN_REC_START2` |`DM_REC2`|Start recording Macro 2                           |
+|`DYN_MACRO_PLAY1`|`DM_PLY1`|Replay Macro 1                                    |
+|`DYN_MACRO_PLAY2`|`DM_PLY2`|Replay Macro 2                                    |
+|`DYN_REC_STOP`   |`DM_RSTP`|Finish the macro that is currently being recorded.|
+
 ## [Layer Switching](feature_advanced_keycodes.md#switching-and-toggling-layers)
 
 |Key             |Description                                                                       |

docs/ru-ru/getting_started_getting_help.md

@@ -0,0 +1,15 @@
+# Получение помощи
+
+Существует много ресурсов для получения помощи по работе с QMK.
+
+## Чат в реальном времени
+
+Вы можете найти разработчиков и пользователей QMK на нашем главном [сервере Discord](https://discord.gg/Uq7gcHh). На сервере есть специальные каналы для разговоров о прошивке, Toolbox, оборудовании и конфигураторе.
+
+## OLKB Сабреддит
+
+Официальный форум QMK [/r/olkb](https://reddit.com/r/olkb) на [reddit.com](https://reddit.com).
+
+## GitHub ишью
+
+Вы можете открыть [ишью на GitHub](https://github.com/qmk/qmk_firmware/issues). Это особенно удобно, когда ваша проблема потребует длительного обсуждения или отладки.

drivers/arm/i2c_master.h

@@ -1,9 +1,9 @@
 /* Copyright 2018 Jack Humbert
  * Copyright 2018 Yiancar
  *
- * This program is free sofare: you can redistribute it and/or modify
+ * This program is free software: you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
- * the Free Sofare Foundation, either version 2 of the License, or
+ * the Free Software Foundation, either version 2 of the License, or
  * (at your option) any later version.
  *
  * This program is distributed in the hope that it will be useful,

keyboards/ares/ares.c

@@ -17,50 +17,12 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #include "ares.h"
 
-#ifdef RGBLIGHT_ENABLE
-
-#include <string.h>
-#include "i2c_master.h"
-#include "rgblight.h"
-
-extern rgblight_config_t rgblight_config;
-
-void matrix_init_kb(void) {
-  i2c_init();
-  // call user level keymaps, if any
-  matrix_init_user();
-}
-
-// custom RGB driver
-void rgblight_set(void) {
-  if (!rgblight_config.enable) {
-    memset(led, 0, 3 * RGBLED_NUM);
-  }
-
-  i2c_transmit(0xb0, (uint8_t*)led, 3 * RGBLED_NUM, 100);
-}
-
-bool rgb_init = false;
-
-void matrix_scan_kb(void) {
-  // if LEDs were previously on before poweroff, turn them back on
-  if (rgb_init == false && rgblight_config.enable) {
-    i2c_transmit(0xb0, (uint8_t*)led, 3 * RGBLED_NUM, 100);
-    rgb_init = true;
-  }
-
-  rgblight_task();
-  matrix_scan_user();
-}
-
-#endif
-
 #ifdef BACKLIGHT_ENABLE
 void backlight_init_ports(void) {
-    setPinOutput(D0);
-    setPinOutput(D1);
-    setPinOutput(D4);
-    setPinOutput(D6);
+	setPinOutput(D0);
+	setPinOutput(D1);
+	setPinOutput(D4);
+	setPinOutput(D6);
 }
 
 void backlight_set(uint8_t level) {
@@ -79,29 +41,3 @@ void backlight_set(uint8_t level) {
 	}
 }
 #endif
-
-// Optional override functions below.
-// You can leave any or all of these undefined.
-// These are only required if you want to perform custom actions.
-
-/*
-void matrix_init_kb(void) {
-  // put your keyboard start-up code here
-  // runs once when the firmware starts up
-  matrix_init_user();
-}
-void matrix_scan_kb(void) {
-  // put your looping keyboard code here
-  // runs every cycle (a lot)
-  matrix_scan_user();
-}
-bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
-  // put your per-action keyboard code here
-  // runs for every action, just before processing by the firmware
-  return process_record_user(keycode, record);
-}
-void led_set_kb(uint8_t usb_led) {
-  // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
-  led_set_user(usb_led);
-}
-*/

keyboards/ares/rules.mk

@@ -1,18 +1,3 @@
-# Copyright 2017 Luiz Ribeiro <luizribeiro@gmail.com>
-#
-# This program is free software: you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation, either version 2 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program.  If not, see <http://www.gnu.org/licenses/>.
-
 # MCU name
 MCU = atmega32a
 
@@ -34,8 +19,6 @@ CONSOLE_ENABLE = yes
 COMMAND_ENABLE = yes
 BACKLIGHT_ENABLE = no
 RGBLIGHT_ENABLE = no
-RGBLIGHT_CUSTOM_DRIVER = yes
+WS2812_DRIVER = i2c
 
 OPT_DEFS = -DDEBUG_LEVEL=0
-
-SRC += i2c_master.c

keyboards/bfake/bfake.c

@@ -16,51 +16,34 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */
 
 #include "bfake.h"
-#ifdef BACKLIGHT_ENABLE
-#include "backlight.h"
-#endif
-#ifdef RGBLIGHT_ENABLE
-#include "rgblight.h"
-#endif
-
-#include <avr/pgmspace.h>
-
-#include "action_layer.h"
-#include "i2c.h"
-#include "quantum.h"
-
-#ifdef RGBLIGHT_ENABLE
-extern rgblight_config_t rgblight_config;
-
-void rgblight_set(void) {
-    if (!rgblight_config.enable) {
-        for (uint8_t i = 0; i < RGBLED_NUM; i++) {
-            led[i].r = 0;
-            led[i].g = 0;
-            led[i].b = 0;
-        }
-    }
-
-    i2c_init();
-    i2c_send(0xb0, (uint8_t*)led, 3 * RGBLED_NUM);
-}
-#endif
 
 __attribute__ ((weak))
-void matrix_scan_user(void) {
-}
+void matrix_scan_user(void) {}
 
 void backlight_init_ports(void) {
-	DDRD |= (1<<0 | 1<<1 | 1<<4 | 1<<6);
-	PORTD &= ~(1<<0 | 1<<1 | 1<<4 | 1<<6);
+	setPinOutput(D0);
+	setPinOutput(D1);
+	setPinOutput(D4);
+	setPinOutput(D6);
+
+	writePinLow(D0);
+	writePinLow(D1);
+	writePinLow(D4);
+	writePinLow(D6);
 }
 
 void backlight_set(uint8_t level) {
 	if (level == 0) {
 		// Turn out the lights
-		PORTD &= ~(1<<0 | 1<<1 | 1<<4 | 1<<6);
+		writePinLow(D0);
+		writePinLow(D1);
+		writePinLow(D4);
+		writePinLow(D6);
 	} else {
 		// Turn on the lights
-		PORTD |= (1<<0 | 1<<1 | 1<<4 | 1<<6);
+		writePinHigh(D0);
+		writePinHigh(D1);
+		writePinHigh(D4);
+		writePinHigh(D6);
 	}
 }

keyboards/bfake/i2c.c

@@ -1,106 +0,0 @@
-/*
-Copyright 2016 Luiz Ribeiro <luizribeiro@gmail.com>
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program.  If not, see <http://www.gnu.org/licenses/>.
-*/
-
-// Please do not modify this file 
-
-#include <avr/io.h>
-#include <util/twi.h>
-
-#include "i2c.h"
-
-void i2c_set_bitrate(uint16_t bitrate_khz) {
-    uint8_t bitrate_div = ((F_CPU / 1000l) / bitrate_khz);
-    if (bitrate_div >= 16) {
-        bitrate_div = (bitrate_div - 16) / 2;
-    }
-    TWBR = bitrate_div;
-}
-
-void i2c_init(void) {
-    // set pull-up resistors on I2C bus pins
-    PORTC |= 0b11;
-
-    i2c_set_bitrate(400);
-
-    // enable TWI (two-wire interface)
-    TWCR |= (1 << TWEN);
-
-    // enable TWI interrupt and slave address ACK
-    TWCR |= (1 << TWIE);
-    TWCR |= (1 << TWEA);
-}
-
-uint8_t i2c_start(uint8_t address) {
-    // reset TWI control register
-    TWCR = 0;
-
-    // begin transmission and wait for it to end
-    TWCR = (1<<TWINT) | (1<<TWSTA) | (1<<TWEN);
-    while (!(TWCR & (1<<TWINT)));
-
-    // check if the start condition was successfully transmitted
-    if ((TWSR & 0xF8) != TW_START) {
-        return 1;
-    }
-
-    // transmit address and wait
-    TWDR = address;
-    TWCR = (1<<TWINT) | (1<<TWEN);
-    while (!(TWCR & (1<<TWINT)));
-
-    // check if the device has acknowledged the READ / WRITE mode
-    uint8_t twst = TW_STATUS & 0xF8;
-    if ((twst != TW_MT_SLA_ACK) && (twst != TW_MR_SLA_ACK)) {
-        return 1;
-    }
-
-    return 0;
-}
-
-void i2c_stop(void) {
-    TWCR = (1<<TWINT) | (1<<TWEN) | (1<<TWSTO);
-}
-
-uint8_t i2c_write(uint8_t data) {
-    TWDR = data;
-
-    // transmit data and wait
-    TWCR = (1<<TWINT) | (1<<TWEN);
-    while (!(TWCR & (1<<TWINT)));
-
-    if ((TWSR & 0xF8) != TW_MT_DATA_ACK) {
-        return 1;
-    }
-
-    return 0;
-}
-
-uint8_t i2c_send(uint8_t address, uint8_t *data, uint16_t length) {
-    if (i2c_start(address)) {
-        return 1;
-    }
-
-    for (uint16_t i = 0; i < length; i++) {
-        if (i2c_write(data[i])) {
-            return 1;
-        }
-    }
-
-    i2c_stop();
-
-    return 0;
-}

keyboards/bfake/i2c.h

@@ -1,27 +0,0 @@
-/*
-Copyright 2016 Luiz Ribeiro <luizribeiro@gmail.com>
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program.  If not, see <http://www.gnu.org/licenses/>.
-*/
-
-// Please do not modify this file 
-
-#ifndef __I2C_H__
-#define __I2C_H__
-
-void i2c_init(void);
-void i2c_set_bitrate(uint16_t bitrate_khz);
-uint8_t i2c_send(uint8_t address, uint8_t *data, uint16_t length);
-
-#endif

keyboards/bfake/rules.mk

@@ -1,18 +1,3 @@
-# Copyright 2017 Luiz Ribeiro <luizribeiro@gmail.com>
-#
-# This program is free software: you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation, either version 2 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program.  If not, see <http://www.gnu.org/licenses/>.
-
 # MCU name
 MCU = atmega32a
 
@@ -34,10 +19,10 @@ CONSOLE_ENABLE = yes
 COMMAND_ENABLE = yes
 BACKLIGHT_ENABLE = no
 RGBLIGHT_ENABLE = no
-RGBLIGHT_CUSTOM_DRIVER = yes
+WS2812_DRIVER = i2c
 
 OPT_DEFS = -DDEBUG_LEVEL=0
 
 # custom matrix setup
 CUSTOM_MATRIX = yes
-SRC = matrix.c i2c.c
+SRC = matrix.c

keyboards/crkbd/rev1/rules.mk

@@ -1,9 +1,3 @@
-RGB_MATRIX_SPLIT_RIGHT = no  # if no, order LEDs for left hand, if yes, order LEDs for right hand
-
-ifeq ($(strip $(RGB_MATRIX_SPLIT_RIGHT)), yes)
-    OPT_DEFS += -DRGB_MATRIX_SPLIT_RIGHT
-endif
-
 SRC += 	matrix.c \
 		split_util.c \
 		split_scomm.c

keyboards/donutcables/budget96/budget96.c

@@ -13,62 +13,9 @@
  * You should have received a copy of the GNU General Public License
  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
+
 #include "budget96.h"
 
-#ifdef BACKLIGHT_ENABLE
-#include "backlight.h"
-#endif
-#ifdef RGBLIGHT_ENABLE
-#include "rgblight.h"
-#endif
-
-#include <avr/pgmspace.h>
-
-#include "action_layer.h"
-#include "i2c_master.h"
-#include "quantum.h"
-
-__attribute__ ((weak))
-void matrix_scan_user(void) {
-}
-
-#ifdef RGBLIGHT_ENABLE
-extern rgblight_config_t rgblight_config;
-
-void rgblight_set(void) {
-    if (!rgblight_config.enable) {
-        for (uint8_t i = 0; i < RGBLED_NUM; i++) {
-            led[i].r = 0;
-            led[i].g = 0;
-            led[i].b = 0;
-        }
-    }
-
-    i2c_init();
-    i2c_transmit(0xb0, (uint8_t*)led, 3 * RGBLED_NUM, 100);
-}
-#endif
-
-void matrix_init_kb(void) {
-#ifdef RGBLIGHT_ENABLE
-    if (rgblight_config.enable) {
-        i2c_init();
-        i2c_transmit(0xb0, (uint8_t*)led, 3 * RGBLED_NUM, 100);
-    }
-#endif
-    // call user level keymaps, if any
-    matrix_init_user();
-}
-
-void matrix_scan_kb(void) {
-#ifdef RGBLIGHT_ENABLE
-    rgblight_task();
-#endif
-    matrix_scan_user();
-    /* Nothing else for now. */
-}
-
-
 void backlight_init_ports(void) {
     // initialize pins D0, D1, D4 and D6 as output
     setPinOutput(D0);
@@ -76,25 +23,25 @@ void backlight_init_ports(void) {
     setPinOutput(D4);
     setPinOutput(D6);
 
-     // turn RGB LEDs on
+    // turn backlight LEDs on
     writePinHigh(D0);
     writePinHigh(D1);
     writePinHigh(D4);
     writePinHigh(D6);
 }
 
- void backlight_set(uint8_t level) {
-	if (level == 0) {
-        // turn RGB LEDs off
+void backlight_set(uint8_t level) {
+    if (level == 0) {
+        // turn backlight LEDs off
         writePinLow(D0);
         writePinLow(D1);
         writePinLow(D4);
         writePinLow(D6);
-	} else {
-        // turn RGB LEDs on
+    } else {
+        // turn backlight LEDs on
         writePinHigh(D0);
         writePinHigh(D1);
         writePinHigh(D4);
         writePinHigh(D6);
-	}
- }
+    }
+}

keyboards/donutcables/budget96/rules.mk

@@ -1,18 +1,3 @@
-# Copyright 2017 Luiz Ribeiro <luizribeiro@gmail.com>
-#
-# This program is free software: you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation, either version 2 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program.  If not, see <http://www.gnu.org/licenses/>.
-
 # MCU name
 MCU = atmega32a
 
@@ -34,9 +19,6 @@ CONSOLE_ENABLE = yes
 COMMAND_ENABLE = yes
 BACKLIGHT_ENABLE = yes
 RGBLIGHT_ENABLE = yes
-RGBLIGHT_CUSTOM_DRIVER = yes
+WS2812_DRIVER = i2c
 
 OPT_DEFS = -DDEBUG_LEVEL=0
-
-# custom matrix setup
-SRC = i2c_master.c

keyboards/ergodox_ez/util/keymap_beautifier/Dockerfile

@@ -0,0 +1,8 @@
+FROM python:3.7.4-alpine3.10
+
+WORKDIR /usr/src/app
+COPY requirements.txt ./
+RUN pip install --no-cache-dir -r requirements.txt
+COPY ./KeymapBeautifier.py ./KeymapBeautifier.py
+
+CMD [ "python", "./KeymapBeautifier.py", "-h" ]

keyboards/ergodox_ez/util/keymap_beautifier/KeymapBeautifier.py

@@ -0,0 +1,399 @@
+#!/usr/bin/env python
+
+import argparse
+import pycparser
+import re
+
+class KeymapBeautifier:
+    justify_toward_center = False
+    filename_in = None
+    filename_out = None
+    output_layout = None
+    output = None
+
+    column_max_widths = {}
+
+    KEY_ALIASES = {
+        "KC_TRANSPARENT": "_______",
+        "KC_TRNS": "_______",
+        "KC_NO": "XXXXXXX",
+    }
+    KEYMAP_START = 'const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {\n'
+    KEYMAP_END = '};\n'
+    KEYMAP_START_REPLACEMENT = "const int keymaps[]={\n"
+    KEY_CHART = """
+    /*
+     * ,--------------------------------------------------.    ,--------------------------------------------------.
+     * |    0   |   1  |   2  |   3  |   4  |   5  |  6   |    |  38  |  39  |  40  |  41  |  42  |  43  |   44   |
+     * |--------+------+------+------+------+------+------|    |------+------+------+------+------+------+--------|
+     * |    7   |   8  |   9  |  10  |  11  |  12  |  13  |    |  45  |  46  |  47  |  48  |  49  |  50  |   51   |
+     * |--------+------+------+------+------+------|      |    |      |------+------+------+------+------+--------|
+     * |   14   |  15  |  16  |  17  |  18  |  19  |------|    |------|  52  |  53  |  54  |  55  |  56  |   57   |
+     * |--------+------+------+------+------+------|  26  |    |  58  |------+------+------+------+------+--------|
+     * |   20   |  21  |  22  |  23  |  24  |  25  |      |    |      |  59  |  60  |  61  |  62  |  63  |   64   |
+     * `--------+------+------+------+------+-------------'    `-------------+------+------+------+------+--------'
+     *   |  27  |  28  |  29  |  30  |  31  |                                |  65  |  66  |  67  |  68  |  69  |
+     *   `----------------------------------'                                `----------------------------------'
+     *                                       ,-------------.  ,-------------.
+     *                                       |  32  |  33  |  |  70  |  71  |
+     *                                ,------+------+------|  |------+------+------.
+     *                                |      |      |  34  |  |  72  |      |      |
+     *                                |  35  |  36  |------|  |------|  74  |  75  |
+     *                                |      |      |  37  |  |  73  |      |      |
+     *                                `--------------------'  `--------------------'
+     */
+"""
+    KEY_COORDINATES = {
+        'LAYOUT_ergodox': [
+            # left hand
+            (0,0), (0,1), (0,2), (0,3), (0,4), (0,5), (0,6),
+            (1,0), (1,1), (1,2), (1,3), (1,4), (1,5), (1,6),
+            (2,0), (2,1), (2,2), (2,3), (2,4), (2,5),
+            (3,0), (3,1), (3,2), (3,3), (3,4), (3,5), (3,6),
+            (4,0), (4,1), (4,2), (4,3), (4,4),
+            # left thumb
+                                               (5,5), (5,6),
+                                                      (6,6),
+                                        (7,4), (7,5), (7,6),
+            # right hand
+             (8,0),  (8,1),  (8,2),  (8,3),  (8,4),  (8,5),  (8,6),
+             (9,0),  (9,1),  (9,2),  (9,3),  (9,4),  (9,5),  (9,6),
+                    (10,1), (10,2), (10,3), (10,4), (10,5), (10,6),
+            (11,0), (11,1), (11,2), (11,3), (11,4), (11,5), (11,6),
+                            (12,2), (12,3), (12,4), (12,5), (12,6),
+            # right thumb
+            (13,0), (13,1),
+            (14,0),
+            (15,0), (15,1), (15,2)
+        ],
+        'LAYOUT_ergodox_pretty': [
+            # left hand and right hand
+            (0,0), (0,1), (0,2), (0,3), (0,4), (0,5), (0,6),   (0,7), (0,8), (0,9), (0,10), (0,11), (0,12), (0,13),
+            (1,0), (1,1), (1,2), (1,3), (1,4), (1,5), (1,6),   (1,7), (1,8), (1,9), (1,10), (1,11), (1,12), (1,13),
+            (2,0), (2,1), (2,2), (2,3), (2,4), (2,5),                 (2,8), (2,9), (2,10), (2,11), (2,12), (2,13),
+            (3,0), (3,1), (3,2), (3,3), (3,4), (3,5), (3,6),   (3,7), (3,8), (3,9), (3,10), (3,11), (3,12), (3,13),
+            (4,0), (4,1), (4,2), (4,3), (4,4),                               (4,9), (4,10), (4,11), (4,12), (4,13),
+
+            # left thumb and right thumb
+                                               (5,5), (5,6),   (5,7), (5,8),
+                                                      (6,6),   (6,7),
+                                        (7,4), (7,5), (7,6),   (7,7), (7,8), (7,9)
+        ],
+    }
+    current_converted_KEY_COORDINATES = []
+
+    # each column is aligned within each group (tuples of row indexes are inclusive)
+    KEY_ROW_GROUPS = {
+        'LAYOUT_ergodox': [(0,4),(5,7),(8,12),(13,15)],
+        'LAYOUT_ergodox_pretty': [(0,7)],
+        #'LAYOUT_ergodox_pretty': [(0,5),(6,7)],
+        #'LAYOUT_ergodox_pretty': [(0,3),(4,4),(5,7)],
+        #'LAYOUT_ergodox_pretty': [(0,4),(5,7)],
+    }
+
+
+    INDEX_CONVERSTION_LAYOUT_ergodox_pretty_to_LAYOUT_ergodox = [
+         0, 1, 2, 3, 4, 5, 6,  38,39,40,41,42,43,44,
+         7, 8, 9,10,11,12,13,  45,46,47,48,49,50,51,
+        14,15,16,17,18,19,        52,53,54,55,56,57,
+        20,21,22,23,24,25,26,  58,59,60,61,62,63,64,
+        27,28,29,30,31,              65,66,67,68,69,
+                       32,33,  70,71,
+                          34,  72,
+                    35,36,37,  73,74,75,
+    ]
+
+
+    def index_conversion_map_reversed(self, conversion_map):
+        return [conversion_map.index(i) for i in range(len(conversion_map))]
+
+
+    def __init__(self, source_code = "",  output_layout="LAYOUT_ergodox", justify_toward_center = False):
+        self.output_layout = output_layout
+        self.justify_toward_center = justify_toward_center
+        # determine the conversion map
+        #if input_layout == self.output_layout:
+        #    conversion_map = [i for i in range(len(self.INDEX_CONVERSTION_LAYOUT_ergodox_pretty_to_LAYOUT_ergodox))]
+        #conversion_map = self.INDEX_CONVERSTION_LAYOUT_ergodox_pretty_to_LAYOUT_ergodox
+        if self.output_layout == "LAYOUT_ergodox_pretty":
+            index_conversion_map = self.index_conversion_map_reversed(self.INDEX_CONVERSTION_LAYOUT_ergodox_pretty_to_LAYOUT_ergodox)
+        else:
+            index_conversion_map = list(range(len(self.INDEX_CONVERSTION_LAYOUT_ergodox_pretty_to_LAYOUT_ergodox)))
+        self.current_converted_KEY_COORDINATES = [
+            self.KEY_COORDINATES[self.output_layout][index_conversion_map[i]]
+            for i in range(len(self.KEY_COORDINATES[self.output_layout]))
+        ]
+
+        self.output = self.beautify_source_code(source_code)
+
+    def beautify_source_code(self, source_code):
+        # to keep it simple for the parser, we only use the parser to parse the key definition part
+        src = {
+            "before": [],
+            "keys": [],
+            "after": [],
+        }
+
+        current_section = "before"
+        for line in source_code.splitlines(True):
+            if current_section == 'before' and line == self.KEYMAP_START:
+                src[current_section].append("\n")
+                current_section = 'keys'
+                src[current_section].append(self.KEYMAP_START_REPLACEMENT)
+                continue
+            elif current_section == 'keys' and line == self.KEYMAP_END:
+                src[current_section].append(self.KEYMAP_END)
+                current_section = 'after'
+                continue
+            src[current_section].append(line)
+        output_lines = src['before'] + self.beautify_keys_section("".join(src['keys'])) + src['after']
+        return "".join(output_lines)
+
+    def beautify_keys_section(self, src):
+        parsed = self.parser(src)
+        layer_output = []
+
+        keymap = parsed.children()[0]
+        layers = keymap[1]
+        for layer in layers.init.exprs:
+            input_layout = layer.expr.name.name
+
+            key_symbols = self.layer_expr(layer)
+            # re-order keys from input_layout to regular layout
+            if input_layout == "LAYOUT_ergodox_pretty":
+                key_symbols = [key_symbols[i] for i in self.index_conversion_map_reversed(self.INDEX_CONVERSTION_LAYOUT_ergodox_pretty_to_LAYOUT_ergodox)]
+
+            padded_key_symbols = self.pad_key_symbols(key_symbols, input_layout)
+            current_pretty_output_layer = self.pretty_output_layer(layer.name[0].value, padded_key_symbols)
+            # strip trailing spaces from padding
+            layer_output.append(re.sub(r" +\n", "\n", current_pretty_output_layer))
+
+        return [self.KEYMAP_START + "\n",
+                self.KEY_CHART + "\n",
+                ",\n\n".join(layer_output) + "\n",
+                self.KEYMAP_END + "\n"]
+
+    def get_row_group(self, row):
+        for low, high in self.KEY_ROW_GROUPS[self.output_layout]:
+            if low <= row <= high:
+                return (low, high)
+        raise Exception("Cannot find row groups in KEY_ROW_GROUPS")
+
+
+    def calculate_column_max_widths(self, key_symbols):
+        # calculate the max width for each column
+        self.column_max_widths = {}
+        for i in range(len(key_symbols)):
+            row_index, column_index = self.current_converted_KEY_COORDINATES[i]
+            row_group = self.get_row_group(row_index)
+            if (row_group, column_index) in self.column_max_widths:
+                self.column_max_widths[(row_group, column_index)] = max(self.column_max_widths[(row_group, column_index)], len(key_symbols[i]))
+            else:
+                self.column_max_widths[(row_group, column_index)] = len(key_symbols[i])
+
+
+    def pad_key_symbols(self, key_symbols, input_layout, just='left'):
+        self.calculate_column_max_widths(key_symbols)
+
+        padded_key_symbols = []
+        # pad each key symbol
+        for i in range(len(key_symbols)):
+            key = key_symbols[i]
+            # look up column coordinate to determine number of spaces to pad
+            row_index, column_index = self.current_converted_KEY_COORDINATES[i]
+            row_group = self.get_row_group(row_index)
+            if just == 'left':
+                padded_key_symbols.append(key.ljust(self.column_max_widths[(row_group, column_index)]))
+            else:
+                padded_key_symbols.append(key.rjust(self.column_max_widths[(row_group, column_index)]))
+        return padded_key_symbols
+
+
+    layer_keys_pointer = 0
+    layer_keys = None
+    def grab_next_n_columns(self, n_columns, input_layout, layer_keys = None, from_beginning = False):
+        if layer_keys:
+            self.layer_keys = layer_keys
+        if from_beginning:
+            self.layer_keys_pointer = 0
+
+        begin = self.layer_keys_pointer
+        end = begin + n_columns
+        return self.layer_keys[self.layer_keys_pointer-n_keys:self.layer_keys_pointer]
+
+    key_coordinates_counter = 0
+    def get_padded_line(self, source_keys, key_from, key_to, just="left"):
+        if just == "right":
+            keys = [k.strip().rjust(len(k)) for k in source_keys[key_from:key_to]]
+        else:
+            keys = [k for k in source_keys[key_from:key_to]]
+
+        from_row, from_column = self.KEY_COORDINATES[self.output_layout][self.key_coordinates_counter]
+        row_group = self.get_row_group(from_row)
+        self.key_coordinates_counter += key_to - key_from
+        columns_before_key_from = sorted([col for row, col in self.KEY_COORDINATES[self.output_layout] if row == from_row and col < from_column])
+        # figure out which columns in this row needs padding; only pad empty columns to the right of an existing column
+        columns_to_pad = { c: True for c in range(from_column) }
+        if columns_before_key_from:
+            for c in range(max(columns_before_key_from)+1):
+                columns_to_pad[c] = False
+
+        # for rows with fewer columns that don't start with column 0, we need to insert leading spaces
+        spaces = 0
+        for c, v in columns_to_pad.items():
+            if not v:
+                continue
+            if (row_group,c) in self.column_max_widths:
+                spaces += self.column_max_widths[(row_group,c)] + len(", ")
+            else:
+                spaces += 0
+        return " " * spaces + ", ".join(keys) + ","
+
+    def pretty_output_layer(self, layer, keys):
+        self.key_coordinates_counter = 0
+        if self.output_layout == "LAYOUT_ergodox":
+            formatted_key_symbols = """
+// left hand
+
+{}
+{}
+{}
+{}
+{}
+
+// left thumb
+
+{}
+{}
+{}
+
+// right hand
+
+{}
+{}
+{}
+{}
+{}
+
+// right thumb
+
+{}
+{}
+{}
+""".format(
+            # left hand
+            self.get_padded_line(keys,  0,  7, just="left"),
+            self.get_padded_line(keys,  7, 14, just="left"),
+            self.get_padded_line(keys, 14, 20, just="left"),
+            self.get_padded_line(keys, 20, 27, just="left"),
+            self.get_padded_line(keys, 27, 32, just="left"),
+            # left thumb
+            self.get_padded_line(keys, 32, 34, just="left"),
+            self.get_padded_line(keys, 34, 35, just="left"),
+            self.get_padded_line(keys, 35, 38, just="left"),
+            # right hand
+            self.get_padded_line(keys, 38, 45, just="left"),
+            self.get_padded_line(keys, 45, 52, just="left"),
+            self.get_padded_line(keys, 52, 58, just="left"),
+            self.get_padded_line(keys, 58, 65, just="left"),
+            self.get_padded_line(keys, 65, 70, just="left"),
+            # right thumb
+            self.get_padded_line(keys, 70, 72, just="left"),
+            self.get_padded_line(keys, 72, 73, just="left"),
+            self.get_padded_line(keys, 73, 76, just="left"),
+            )
+        elif self.output_layout == "LAYOUT_ergodox_pretty":
+            left_half_justification = "right" if self.justify_toward_center else "left"
+            formatted_key_symbols = """
+{}      {}
+{}      {}
+{}      {}
+{}      {}
+{}      {}
+
+{}      {}
+{}      {}
+{}      {}
+""".format(
+                self.get_padded_line(keys,  0,  7, just=left_half_justification), self.get_padded_line(keys, 38, 45, just="left"),
+                self.get_padded_line(keys,  7, 14, just=left_half_justification), self.get_padded_line(keys, 45, 52, just="left"),
+                self.get_padded_line(keys, 14, 20, just=left_half_justification), self.get_padded_line(keys, 52, 58, just="left"),
+                self.get_padded_line(keys, 20, 27, just=left_half_justification), self.get_padded_line(keys, 58, 65, just="left"),
+                self.get_padded_line(keys, 27, 32, just=left_half_justification), self.get_padded_line(keys, 65, 70, just="left"),
+
+                self.get_padded_line(keys, 32, 34, just=left_half_justification), self.get_padded_line(keys, 70, 72, just="left"),
+                self.get_padded_line(keys, 34, 35, just=left_half_justification), self.get_padded_line(keys, 72, 73, just="left"),
+                self.get_padded_line(keys, 35, 38, just=left_half_justification), self.get_padded_line(keys, 73, 76, just="left"),
+
+                )
+        else:
+            formatted_key_symbols = ""
+
+        # rid of the trailing comma
+        formatted_key_symbols = formatted_key_symbols[0:len(formatted_key_symbols)-2] + "\n"
+        s = "[{}] = {}({})".format(layer, self.output_layout, formatted_key_symbols)
+        return s
+
+    # helper functions for pycparser
+    def parser(self, src):
+        src = self.comment_remover(src)
+        return pycparser.CParser().parse(src)
+    def comment_remover(self, text):
+        # remove comments since pycparser cannot deal with them
+        # credit: https://stackoverflow.com/a/241506
+        def replacer(match):
+            s = match.group(0)
+            if s.startswith('/'):
+                return " " # note: a space and not an empty string
+            else:
+                return s
+        pattern = re.compile(
+            r'//.*?$|/\*.*?\*/|\'(?:\\.|[^\\\'])*\'|"(?:\\.|[^\\"])*"',
+            re.DOTALL | re.MULTILINE
+        )
+        return re.sub(pattern, replacer, text)
+
+    def function_expr(self, f):
+        name = f.name.name
+        args = []
+        for arg in f.args.exprs:
+            if type(arg) is pycparser.c_ast.Constant:
+                args.append(arg.value)
+            elif type(arg) is pycparser.c_ast.ID:
+                args.append(arg.name)
+        return "{}({})".format(name, ",".join(args))
+
+    def key_expr(self, raw):
+        if type(raw) is pycparser.c_ast.ID:
+            if raw.name in self.KEY_ALIASES:
+                return self.KEY_ALIASES[raw.name]
+            return raw.name
+        elif type(raw) is pycparser.c_ast.FuncCall:
+            return self.function_expr(raw)
+
+    def layer_expr(self, layer):
+        transformed = [self.key_expr(k) for k in layer.expr.args.exprs]
+        return transformed
+
+
+if __name__ == "__main__":
+
+    parser = argparse.ArgumentParser(description="Beautify keymap.c downloaded from ErgoDox-Ez Configurator for easier customization.")
+    parser.add_argument("input_filename", help="input file: c source code file that has the layer keymaps")
+    parser.add_argument("-o", "--output-filename", help="output file: beautified c filename. If not given, output to STDOUT.")
+    parser.add_argument("-p", "--pretty-output-layout", action="store_true", help="use LAYOUT_ergodox_pretty for output instead of LAYOUT_ergodox")
+    parser.add_argument("-c", "--justify-toward-center", action="store_true", help="for LAYOUT_ergodox_pretty, align right for the left half, and align left for the right half. Default is align left for both halves.")
+    args = parser.parse_args()
+    if args.pretty_output_layout:
+        output_layout="LAYOUT_ergodox_pretty"
+    else:
+        output_layout="LAYOUT_ergodox"
+    with open(args.input_filename) as f:
+        source_code = f.read()
+    result = KeymapBeautifier(source_code, output_layout=output_layout, justify_toward_center=args.justify_toward_center).output
+    if args.output_filename:
+        with open(args.output_filename, "w") as f:
+            f.write(result)
+    else:
+        print(result)
+

keyboards/ergodox_ez/util/keymap_beautifier/README.md

@@ -0,0 +1,139 @@
+# keymap_beautifier.py
+
+## About
+This Python 3 script, by [Tsan-Kuang Lee](https://github.com/tsankuanglee) takes the keymap.c downloaded from [ErgoDox EZ Configurator](https://configure.ergodox-ez.com/) and beautifies it for easier customization, allowing one to quickly draft a layout to build upon.
+
+## Features
+For example, the original `keymap.c` looks like
+
+```
+[0] = LAYOUT_ergodox(KC_EQUAL,KC_1,KC_2,KC_3,KC_4,KC_5,LCTL(KC_MINUS),KC_DELETE,KC_Q,KC_W,KC_E,KC_R,KC_T,KC_LBRACKET,KC_BSPACE,KC_A,KC_S,KC_D,KC_F,KC_G,KC_LSPO,CTL_T(KC_Z),KC_X,KC_C,KC_V,KC_B,ALL_T(KC_NO),LT(1,KC_GRAVE),KC_QUOTE,LALT(KC_LSHIFT),KC_LEFT,KC_RIGHT,ALT_T(KC_APPLICATION),KC_LGUI,KC_HOME,KC_SPACE,KC_UNDS,KC_END,LCTL(KC_EQUAL),KC_6,KC_7,KC_8,KC_9,KC_0,KC_MINUS,KC_RBRACKET,KC_Y,KC_U,KC_I,KC_O,KC_P,KC_BSLASH,KC_H,ALT_T(KC_J),KC_K,KC_L,LT(2,KC_SCOLON),GUI_T(KC_QUOTE),MEH_T(KC_NO),KC_N,KC_M,KC_COMMA,KC_DOT,CTL_T(KC_SLASH),KC_RSPC,KC_UP,KC_DOWN,KC_LBRACKET,KC_RBRACKET,TT(1),KC_LALT,CTL_T(KC_ESCAPE),KC_PGUP,KC_PGDOWN,LT(1,KC_TAB),KC_ENTER),
+```
+
+The beautifier parses it and outputs:
+
+```
+[0] = LAYOUT_ergodox(
+// left hand
+
+KC_EQUAL      , KC_1       , KC_2           , KC_3   , KC_4    , KC_5, LCTL(KC_MINUS),
+KC_DELETE     , KC_Q       , KC_W           , KC_E   , KC_R    , KC_T, KC_LBRACKET   ,
+KC_BSPACE     , KC_A       , KC_S           , KC_D   , KC_F    , KC_G,
+KC_LSPO       , CTL_T(KC_Z), KC_X           , KC_C   , KC_V    , KC_B, ALL_T(KC_NO)  ,
+LT(1,KC_GRAVE), KC_QUOTE   , LALT(KC_LSHIFT), KC_LEFT, KC_RIGHT,
+
+// left thumb
+
+          ALT_T(KC_APPLICATION), KC_LGUI,
+                                 KC_HOME,
+KC_SPACE, KC_UNDS              , KC_END ,
+
+// right hand
+
+LCTL(KC_EQUAL), KC_6, KC_7       , KC_8    , KC_9       , KC_0           , KC_MINUS       ,
+KC_RBRACKET   , KC_Y, KC_U       , KC_I    , KC_O       , KC_P           , KC_BSLASH      ,
+                KC_H, ALT_T(KC_J), KC_K    , KC_L       , LT(2,KC_SCOLON), GUI_T(KC_QUOTE),
+MEH_T(KC_NO)  , KC_N, KC_M       , KC_COMMA, KC_DOT     , CTL_T(KC_SLASH), KC_RSPC        ,
+                      KC_UP      , KC_DOWN , KC_LBRACKET, KC_RBRACKET    , TT(1)          ,
+
+// right thumb
+
+KC_LALT  , CTL_T(KC_ESCAPE),
+KC_PGUP  ,
+KC_PGDOWN, LT(1,KC_TAB)    , KC_ENTER
+)
+```
+
+Optionally, it can also render [LAYOUT_ergodox_pretty](https://github.com/qmk/qmk_firmware/blob/ee700b2e831067bdb7584425569b61bc6329247b/keyboards/ergodox_ez/keymaps/bpruitt-goddard/keymap.c#L49-L57):
+```
+[0] = LAYOUT_ergodox_pretty(
+  KC_ESCAPE,        KC_1,     KC_2,    KC_3,     KC_4,           KC_5,          KC_LEAD,      KC_LEAD, KC_6          , KC_7            , KC_8            , KC_9               , KC_0              , KC_BSPACE           ,
+     KC_TAB,        KC_Q,     KC_W,    KC_E,     KC_R,           KC_T,          KC_HYPR,      KC_HYPR, KC_Y          , KC_U            , KC_I            , KC_O               , KC_P              , KC_BSLASH           ,
+   KC_LCTRL,        KC_A,     KC_S,    KC_D,     KC_F,           KC_G,                                 KC_H          , KC_J            , KC_K            , KC_L               , KC_SCOLON         , KC_QUOTE            ,
+  KC_LSHIFT,        KC_Z,     KC_X,    KC_C,     KC_V,           KC_B,           SH_MON,      SH_MON , KC_N          , KC_M            , KC_COMMA        , KC_DOT             , KC_SLASH          , KC_RSHIFT           ,
+LT(6,KC_NO), LT(7,KC_NO), KC_LCTRL, KC_LGUI,  KC_LALT,                                                                 ALGR_T(KC_MINUS), RGUI_T(KC_EQUAL), RCTL_T(KC_LBRACKET), LT(10,KC_RBRACKET), LT(6,KC_APPLICATION),
+
+                                                       LT(6,KC_GRAVE),     MEH_T(KC_NO),      KC_LEFT, KC_RIGHT      ,
+                                                                       LT(10,KC_DELETE),      KC_UP  ,
+                                             KC_SPACE, LT(8,KC_ENTER),  LT(7,KC_BSPACE),      KC_DOWN, LT(7,KC_SPACE), LT(8,KC_ENTER)
+)
+```
+
+We can also align everythng t othe left (easier editing in my opinon):
+```
+[0] = LAYOUT_ergodox_pretty(
+KC_ESCAPE  , KC_1       , KC_2    , KC_3   , KC_4    , KC_5          , KC_LEAD         ,      KC_LEAD, KC_6          , KC_7            , KC_8            , KC_9               , KC_0              , KC_BSPACE           ,
+KC_TAB     , KC_Q       , KC_W    , KC_E   , KC_R    , KC_T          , KC_HYPR         ,      KC_HYPR, KC_Y          , KC_U            , KC_I            , KC_O               , KC_P              , KC_BSLASH           ,
+KC_LCTRL   , KC_A       , KC_S    , KC_D   , KC_F    , KC_G          ,                                 KC_H          , KC_J            , KC_K            , KC_L               , KC_SCOLON         , KC_QUOTE            ,
+KC_LSHIFT  , KC_Z       , KC_X    , KC_C   , KC_V    , KC_B          , SH_MON          ,      SH_MON , KC_N          , KC_M            , KC_COMMA        , KC_DOT             , KC_SLASH          , KC_RSHIFT           ,
+LT(6,KC_NO), LT(7,KC_NO), KC_LCTRL, KC_LGUI, KC_LALT ,                                                                 ALGR_T(KC_MINUS), RGUI_T(KC_EQUAL), RCTL_T(KC_LBRACKET), LT(10,KC_RBRACKET), LT(6,KC_APPLICATION),
+
+                                                       LT(6,KC_GRAVE), MEH_T(KC_NO)    ,      KC_LEFT, KC_RIGHT      ,
+                                                                       LT(10,KC_DELETE),      KC_UP  ,
+                                             KC_SPACE, LT(8,KC_ENTER), LT(7,KC_BSPACE) ,      KC_DOWN, LT(7,KC_SPACE), LT(8,KC_ENTER)
+)
+```
+
+## Usage
+
+### With docker
+This is the cleaner way. `Docker` is the only requirement. The program executes within a container that has all dependencies installed.
+
+First build the images. (Run once)
+```
+cd QMK_GIT_REPO_dir/keyboards/ergodox_ez/util/keymap_beautifier
+docker build -t keymapbeautifier:1.0 .
+```
+Run it
+```
+cd QMK_GIT_REPO_dir/keyboards/ergodox_ez/util/keymap_beautifier
+cp PATH_TO_YOUR_C_SOURCE_FILE.c input.c
+./docker_run.sh input.c -p -c -o output.c
+```
+The prettified file is written to `output.c`. See the section Tweaks for non-default settings.
+
+### Without docker
+Requirements:
+* python3 (tested on 3.7.4)
+* python module `pycparser` installed (with `pip install pycparser`)
+
+To run:
+```
+cd QMK_GIT_REPO_dir/keyboards/ergodox_ez/util/keymap_beautifier
+cp PATH_TO_YOUR_C_SOURCE_FILE.c input.c
+./KeymapBeautifier.py input.c -p -c -o output.c
+```
+The prettified file is written to `output.c`. See the section Tweaks for non-default settings.
+
+## Tweaks
+```
+usage: KeymapBeautifier.py [-h] [-o OUTPUT_FILENAME] [-p] [-c] input_filename
+
+Beautify keymap.c downloaded from ErgoDox-Ez Configurator for easier
+customization.
+
+positional arguments:
+  input_filename        input file: c source code file that has the layer
+                        keymaps
+
+optional arguments:
+  -h, --help            show this help message and exit
+  -o OUTPUT_FILENAME, --output-filename OUTPUT_FILENAME
+                        output file: beautified c filename. If not given,
+                        output to STDOUT.
+  -p, --pretty-output-layout
+                        use LAYOUT_ergodox_pretty for output instead of
+                        LAYOUT_ergodox
+  -c, --justify-toward-center
+                        for LAYOUT_ergodox_pretty, align right for the left
+                        half, and align left for the right half. Default is
+                        align left for both halves.
+```
+For example,
+```
+./docker_run.sh input.c -p -c -o output.c
+# or if you don't want to use docker:
+#./KeymapBeautifier.py input.c -p -c -o output.c
+```
+will read `input.c`, and produce `output.c` with LAYOUT_ergodox_pretty, and have the key symbols gravitating toward the center.
+

keyboards/ergodox_ez/util/keymap_beautifier/docker_run.sh

@@ -0,0 +1,3 @@
+#!/bin/sh
+
+docker run --mount type=bind,source="${PWD}",target=/usr/src/app --name keymapbeautifier --rm keymapbeautifier:1.0 ./KeymapBeautifier.py $*

keyboards/ergodox_ez/util/keymap_beautifier/requirements.txt

@@ -0,0 +1 @@
+pycparser

keyboards/ergodox_ez/util/readme.md

@@ -1,3 +1,11 @@
 # ErgoDox EZ Utilities
 
+## compile_keymap.py
+
 The Python script in this directory, by [mbarkhau](https://github.com/mbarkhau) allows you to write out a basic ErgoDox EZ keymap using Markdown notation, and then transpile it to C, which you can then compile. It's experimental, but if you're not comfortable using C, it's a nice option.
+
+## keymap_beautifier.py
+
+This Python 3 script, by [Tsan-Kuang Lee](https://github.com/tsankuanglee) takes the keymap.c downloaded from [ErgoDox EZ Configurator](https://configure.ergodox-ez.com/) and beautifies it for easier customization, allowing one to quickly draft a layout to build upon.
+
+See [README.md](./keymap_beautifier/README.md) for this utility for more details.

keyboards/eve/meteor/meteor.c

@@ -14,49 +14,7 @@
  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
 
-#include "i2c_master.h"
-#include "quantum.h"
-
-#ifdef RGBLIGHT_ENABLE
-#include "rgblight.h"
-extern rgblight_config_t rgblight_config;
-
-void rgblight_set(void) {
-    if (!rgblight_config.enable) {
-        for (uint8_t i = 0; i < RGBLED_NUM; i++) {
-            led[i].r = 0;
-            led[i].g = 0;
-            led[i].b = 0;
-        }
-    }
-
-    i2c_init();
-    i2c_transmit(0xb0, (uint8_t*)led, 3 * RGBLED_NUM, 100);
-}
-#endif
-
-void matrix_init_kb(void) {
-#ifdef RGBLIGHT_ENABLE
-    if (rgblight_config.enable) {
-        i2c_init();
-        i2c_transmit(0xb0, (uint8_t*)led, 3 * RGBLED_NUM, 100);
-    }
-#endif
-    // call user level keymaps, if any
-    matrix_init_user();
-}
-
-void matrix_scan_kb(void) {
-#ifdef RGBLIGHT_ENABLE
-    rgblight_task();
-#endif
-    matrix_scan_user();
-    /* Nothing else for now. */
-}
-
-__attribute__ ((weak))
-void matrix_scan_user(void) {
-}
+#include "meteor.h"
 
 void backlight_init_ports(void) {
     // initialize pins D0, D1, D4 and D6 as output
@@ -73,17 +31,17 @@ void backlight_init_ports(void) {
 }
 
 void backlight_set(uint8_t level) {
-	if (level == 0) {
+    if (level == 0) {
         // turn backlight LEDs off
         writePinLow(D0);
         writePinLow(D1);
         writePinLow(D4);
         writePinLow(D6);
-	} else {
+    } else {
         // turn backlight LEDs on
         writePinHigh(D0);
         writePinHigh(D1);
         writePinHigh(D4);
         writePinHigh(D6);
-	}
+    }
 }

keyboards/eve/meteor/rules.mk

@@ -1,18 +1,3 @@
-# Copyright 2017 Luiz Ribeiro <luizribeiro@gmail.com>
-#
-# This program is free software: you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation, either version 2 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program.  If not, see <http://www.gnu.org/licenses/>.
-
 # MCU name
 MCU = atmega32a
 
@@ -34,8 +19,6 @@ CONSOLE_ENABLE = yes
 COMMAND_ENABLE = yes
 BACKLIGHT_ENABLE = yes
 RGBLIGHT_ENABLE = no
-RGBLIGHT_CUSTOM_DRIVER = no
+WS2812_DRIVER = i2c
 
 OPT_DEFS = -DDEBUG_LEVEL=0
-
-QUANTUM_LIB_SRC = i2c_master.c

keyboards/exclusive/e6v2/le_bmc/le_bmc.c

@@ -13,49 +13,8 @@
  * You should have received a copy of the GNU General Public License
  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
-#include "rgblight.h"
-#include "i2c_master.h"
-#include "quantum.h"
 
-#ifdef RGBLIGHT_ENABLE
-extern rgblight_config_t rgblight_config;
-
-void rgblight_set(void) {
-    if (!rgblight_config.enable) {
-        for (uint8_t i = 0; i < RGBLED_NUM; i++) {
-            led[i].r = 0;
-            led[i].g = 0;
-            led[i].b = 0;
-        }
-    }
-
-    i2c_init();
-    i2c_transmit(0xb0, (uint8_t*)led, 3 * RGBLED_NUM, 100);
-}
-#endif
-
-void matrix_init_kb(void) {
-#ifdef RGBLIGHT_ENABLE
-    if (rgblight_config.enable) {
-        i2c_init();
-        i2c_transmit(0xb0, (uint8_t*)led, 3 * RGBLED_NUM, 100);
-    }
-#endif
-    // call user level keymaps, if any
-    matrix_init_user();
-}
-
-void matrix_scan_kb(void) {
-#ifdef RGBLIGHT_ENABLE
-    rgblight_task();
-#endif
-    matrix_scan_user();
-    /* Nothing else for now. */
-}
-
-__attribute__ ((weak))
-void matrix_scan_user(void) {
-}
+#include "le_bmc.h"
 
 void backlight_init_ports(void) {
     // initialize pins D0, D1, D4 and D6 as output
@@ -72,17 +31,17 @@ void backlight_init_ports(void) {
 }
 
 void backlight_set(uint8_t level) {
-	if (level == 0) {
+    if (level == 0) {
         // turn backlight LEDs off
         writePinLow(D0);
         writePinLow(D1);
         writePinLow(D4);
         writePinLow(D6);
-	} else {
+    } else {
         // turn backlight LEDs on
         writePinHigh(D0);
         writePinHigh(D1);
         writePinHigh(D4);
         writePinHigh(D6);
-	}
-}
+    }
+}

keyboards/exclusive/e6v2/le_bmc/rules.mk

@@ -24,7 +24,7 @@ SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
 # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
 NKRO_ENABLE = no            # USB Nkey Rollover
 BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality on B7 by default
-RGBLIGHT_CUSTOM_DRIVER = yes
+WS2812_DRIVER = i2c
 RGBLIGHT_ENABLE = yes        # Enable keyboard RGB underglow
 MIDI_ENABLE = no            # MIDI support (+2400 to 4200, depending on config)
 UNICODE_ENABLE = no         # Unicode
@@ -34,4 +34,3 @@ FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
 HD44780_ENABLE = no 		# Enable support for HD44780 based LCDs (+400)
 
 OPT_DEFS = -DDEBUG_LEVEL=0
-SRC += i2c_master.c

keyboards/exclusive/e6v2/oe_bmc/oe_bmc.c

@@ -13,57 +13,8 @@
  * You should have received a copy of the GNU General Public License
  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
+
 #include "oe_bmc.h"
-#include "rgblight.h"
-#include "i2c_master.h"
-
-void matrix_init_kb(void) {
-	// put your keyboard start-up code here
-	// runs once when the firmware starts up
-
-	matrix_init_user();
-}
-
-void matrix_scan_kb(void) {
-	// put your looping keyboard code here
-	// runs every cycle (a lot)
-
-	matrix_scan_user();
-}
-
-bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
-	// put your per-action keyboard code here
-	// runs for every action, just before processing by the firmware
-
-	return process_record_user(keycode, record);
-}
-
-void led_set_kb(uint8_t usb_led) {
-	// put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
-
-	led_set_user(usb_led);
-}
-
-#ifdef RGBLIGHT_ENABLE
-extern rgblight_config_t rgblight_config;
-
-void rgblight_set(void) {
-    if (!rgblight_config.enable) {
-        for (uint8_t i = 0; i < RGBLED_NUM; i++) {
-            led[i].r = 0;
-            led[i].g = 0;
-            led[i].b = 0;
-        }
-    }
-
-    i2c_init();
-    i2c_transmit(0xb0, (uint8_t*)led, 3 * RGBLED_NUM, 100);
-}
-#endif
-
-__attribute__ ((weak))
-void matrix_scan_user(void) {
-}
 
 void backlight_init_ports(void) {
     // initialize pins D0, D1, D4 and D6 as output
@@ -72,7 +23,7 @@ void backlight_init_ports(void) {
     setPinOutput(D4);
     setPinOutput(D6);
 
-    // turn RGB LEDs on
+    // turn backlight LEDs on
     writePinHigh(D0);
     writePinHigh(D1);
     writePinHigh(D4);
@@ -80,17 +31,17 @@ void backlight_init_ports(void) {
 }
 
 void backlight_set(uint8_t level) {
-	if (level == 0) {
-        // turn RGB LEDs off
+    if (level == 0) {
+        // turn backlight LEDs off
         writePinLow(D0);
         writePinLow(D1);
         writePinLow(D4);
         writePinLow(D6);
-	} else {
-        // turn RGB LEDs on
+    } else {
+        // turn backlight LEDs on
         writePinHigh(D0);
         writePinHigh(D1);
         writePinHigh(D4);
         writePinHigh(D6);
-	}
+    }
 }

keyboards/exclusive/e6v2/oe_bmc/rules.mk

@@ -24,7 +24,7 @@ SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
 # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
 NKRO_ENABLE = no            # USB Nkey Rollover
 BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality on B7 by default
-RGBLIGHT_CUSTOM_DRIVER = yes
+WS2812_DRIVER = i2c
 RGBLIGHT_ENABLE = yes        # Enable keyboard RGB underglow
 MIDI_ENABLE = no            # MIDI support (+2400 to 4200, depending on config)
 UNICODE_ENABLE = no         # Unicode
@@ -34,4 +34,3 @@ FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
 HD44780_ENABLE = no 		# Enable support for HD44780 based LCDs (+400)
 
 OPT_DEFS = -DDEBUG_LEVEL=0
-SRC += i2c_master.c

keyboards/exent/exent.c

@@ -15,76 +15,3 @@
  */
 
 #include "exent.h"
-
-#ifdef RGBLIGHT_ENABLE
-
-#    include <string.h>
-#    include "i2c_master.h"
-#    include "rgblight.h"
-
-extern rgblight_config_t rgblight_config;
-
-void matrix_init_kb(void) {
-    i2c_init();
-    // call user level keymaps, if any
-    matrix_init_user();
-}
-
-// custom RGB driver
-void rgblight_set(void) {
-    if (!rgblight_config.enable) {
-        memset(led, 0, 3 * RGBLED_NUM);
-    }
-
-    i2c_transmit(0xb0, (uint8_t*)led, 3 * RGBLED_NUM, 100);
-}
-
-bool rgb_init = false;
-
-void matrix_scan_kb(void) {
-    // if LEDs were previously on before poweroff, turn them back on
-    if (rgb_init == false && rgblight_config.enable) {
-        i2c_transmit(0xb0, (uint8_t*)led, 3 * RGBLED_NUM, 100);
-        rgb_init = true;
-    }
-
-    rgblight_task();
-    matrix_scan_user();
-}
-
-#endif
-
-// Optional override functions below.
-// You can leave any or all of these undefined.
-// These are only required if you want to perform custom actions.
-
-/*
-
-void matrix_init_kb(void) {
-  // put your keyboard start-up code here
-  // runs once when the firmware starts up
-
-  matrix_init_user();
-}
-
-void matrix_scan_kb(void) {
-  // put your looping keyboard code here
-  // runs every cycle (a lot)
-
-  matrix_scan_user();
-}
-
-bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
-  // put your per-action keyboard code here
-  // runs for every action, just before processing by the firmware
-
-  return process_record_user(keycode, record);
-}
-
-void led_set_kb(uint8_t usb_led) {
-  // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
-
-  led_set_user(usb_led);
-}
-
-*/

keyboards/exent/rules.mk

@@ -19,10 +19,8 @@ CONSOLE_ENABLE = yes
 COMMAND_ENABLE = yes
 BACKLIGHT_ENABLE = no
 RGBLIGHT_ENABLE = yes
-RGBLIGHT_CUSTOM_DRIVER = yes
+WS2812_DRIVER = i2c
 
 OPT_DEFS = -DDEBUG_LEVEL=0
 
-SRC += i2c_master.c
-
 LAYOUTS = 65_ansi 65_iso

keyboards/facew/facew.c

@@ -16,51 +16,31 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */
 
 #include "facew.h"
-#ifdef BACKLIGHT_ENABLE
-#include "backlight.h"
-#endif
-#ifdef RGBLIGHT_ENABLE
-#include "rgblight.h"
-#endif
-
-#include <avr/pgmspace.h>
-
-#include "action_layer.h"
-#include "i2c_master.h"
-#include "quantum.h"
-
-#ifdef RGBLIGHT_ENABLE
-extern rgblight_config_t rgblight_config;
-
-void rgblight_set(void) {
-    if (!rgblight_config.enable) {
-        for (uint8_t i = 0; i < RGBLED_NUM; i++) {
-            led[i].r = 0;
-            led[i].g = 0;
-            led[i].b = 0;
-        }
-    }
-
-    i2c_init();
-    i2c_transmit(0xb0, (uint8_t*)led, 3 * RGBLED_NUM, 100);
-}
-#endif
-
-__attribute__ ((weak))
-void matrix_scan_user(void) {
-}
 
 void backlight_init_ports(void) {
-	DDRD |= (1<<0 | 1<<1 | 1<<4 | 1<<6);
-	PORTD &= ~(1<<0 | 1<<1 | 1<<4 | 1<<6);
+	setPinOutput(D0);
+	setPinOutput(D1);
+	setPinOutput(D4);
+	setPinOutput(D6);
+
+	writePinLow(D0);
+	writePinLow(D1);
+	writePinLow(D4);
+	writePinLow(D6);
 }
 
 void backlight_set(uint8_t level) {
 	if (level == 0) {
 		// Turn out the lights
-		PORTD &= ~(1<<0 | 1<<1 | 1<<4 | 1<<6);
+		writePinLow(D0);
+		writePinLow(D1);
+		writePinLow(D4);
+		writePinLow(D6);
 	} else {
 		// Turn on the lights
-		PORTD |= (1<<0 | 1<<1 | 1<<4 | 1<<6);
+		writePinHigh(D0);
+		writePinHigh(D1);
+		writePinHigh(D4);
+		writePinHigh(D6);
 	}
 }

keyboards/facew/rules.mk

@@ -1,18 +1,3 @@
-# Copyright 2017 Luiz Ribeiro <luizribeiro@gmail.com>
-#
-# This program is free software: you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation, either version 2 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program.  If not, see <http://www.gnu.org/licenses/>.
-
 # MCU name
 MCU = atmega32a
 
@@ -34,11 +19,8 @@ CONSOLE_ENABLE = yes
 COMMAND_ENABLE = yes
 BACKLIGHT_ENABLE = yes
 RGBLIGHT_ENABLE = yes
-RGBLIGHT_CUSTOM_DRIVER = yes
+WS2812_DRIVER = i2c
 
 OPT_DEFS = -DDEBUG_LEVEL=0
 
-# custom matrix setup
-SRC = i2c_master.c
-
 LAYOUTS = 60_ansi

keyboards/ft/mars80/mars80.c

@@ -16,50 +16,6 @@
 
 #include "mars80.h"
 
-#include "rgblight.h"
-#include "i2c_master.h"
-#include "quantum.h"
-
-#ifdef RGBLIGHT_ENABLE
-extern rgblight_config_t rgblight_config;
-
-void rgblight_set(void) {
-    if (!rgblight_config.enable) {
-        for (uint8_t i = 0; i < RGBLED_NUM; i++) {
-            led[i].r = 0;
-            led[i].g = 0;
-            led[i].b = 0;
-        }
-    }
-
-    i2c_init();
-    i2c_transmit(0xb0, (uint8_t*)led, 3 * RGBLED_NUM, 100);
-}
-#endif
-
-void matrix_init_kb(void) {
-#ifdef RGBLIGHT_ENABLE
-    if (rgblight_config.enable) {
-        i2c_init();
-        i2c_transmit(0xb0, (uint8_t*)led, 3 * RGBLED_NUM, 100);
-    }
-#endif
-    // call user level keymaps, if any
-    matrix_init_user();
-}
-
-void matrix_scan_kb(void) {
-#ifdef RGBLIGHT_ENABLE
-    rgblight_task();
-#endif
-    matrix_scan_user();
-    /* Nothing else for now. */
-}
-
-__attribute__ ((weak))
-void matrix_scan_user(void) {
-}
-
 void backlight_init_ports(void) {
     // initialize pins D0, D1, D4 and D6 as output
     setPinOutput(D0);
@@ -75,17 +31,17 @@ void backlight_init_ports(void) {
 }
 
 void backlight_set(uint8_t level) {
-	if (level == 0) {
+    if (level == 0) {
         // turn backlight LEDs off
         writePinLow(D0);
         writePinLow(D1);
         writePinLow(D4);
         writePinLow(D6);
-	} else {
+    } else {
         // turn backlight LEDs on
         writePinHigh(D0);
         writePinHigh(D1);
         writePinHigh(D4);
         writePinHigh(D6);
-	}
-}
+    }
+}

keyboards/ft/mars80/rules.mk

@@ -1,18 +1,3 @@
-# Copyright 2019 Luiz Ribeiro <luizribeiro@gmail.com>
-#
-# This program is free software: you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation, either version 2 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program.  If not, see <http://www.gnu.org/licenses/>.
-
 # MCU name
 MCU = atmega32a
 
@@ -34,10 +19,8 @@ CONSOLE_ENABLE = yes
 COMMAND_ENABLE = yes
 BACKLIGHT_ENABLE = yes
 RGBLIGHT_ENABLE = yes
-RGBLIGHT_CUSTOM_DRIVER = yes
+WS2812_DRIVER = i2c
 
 OPT_DEFS = -DDEBUG_LEVEL=0
 
-SRC += i2c_master.c
-
 LAYOUTS = tkl_ansi tkl_iso

keyboards/gray_studio/hb85/hb85.c

@@ -16,33 +16,7 @@ You should have received a copy of the GNU General Public License
 along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */
 
-#include <string.h>
-
-#include "rgblight.h"
-
-#include "i2c_master.h"
-#include "quantum.h"
-
-#ifdef RGBLIGHT_ENABLE
-extern rgblight_config_t rgblight_config;
-
-void rgblight_set(void) {
-    if (!rgblight_config.enable) {
-        for (uint8_t i = 0; i < RGBLED_NUM; i++) {
-            led[i].r = 0;
-            led[i].g = 0;
-            led[i].b = 0;
-        }
-    }
-
-    i2c_init();
-    i2c_transmit(0xb0, (uint8_t*)led, 3 * RGBLED_NUM, 100);
-}
-#endif
-
-__attribute__ ((weak))
-void matrix_scan_user(void) {
-}
+#include "hb85.h"
 
 void backlight_init_ports(void) {
     // initialize pins D0, D1, D4 and D6 as output
@@ -51,7 +25,7 @@ void backlight_init_ports(void) {
     setPinOutput(D4);
     setPinOutput(D6);
 
-    // turn RGB LEDs on
+    // turn backlight LEDs on
     writePinHigh(D0);
     writePinHigh(D1);
     writePinHigh(D4);
@@ -59,17 +33,17 @@ void backlight_init_ports(void) {
 }
 
 void backlight_set(uint8_t level) {
-	if (level == 0) {
-        // turn RGB LEDs off
+    if (level == 0) {
+        // turn backlight LEDs off
         writePinLow(D0);
         writePinLow(D1);
         writePinLow(D4);
         writePinLow(D6);
-	} else {
-        // turn RGB LEDs on
+    } else {
+        // turn backlight LEDs on
         writePinHigh(D0);
         writePinHigh(D1);
         writePinHigh(D4);
         writePinHigh(D6);
-	}
+    }
 }

keyboards/gray_studio/hb85/rules.mk

@@ -1,18 +1,3 @@
-# Copyright 2019 fcoury <felipe.coury@gmail.com>
-#
-# This program is free software: you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation, either version 2 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program.  If not, see <http://www.gnu.org/licenses/>.
-
 # MCU name
 MCU = atmega32a
 
@@ -34,8 +19,6 @@ CONSOLE_ENABLE = yes
 COMMAND_ENABLE = yes
 BACKLIGHT_ENABLE = no
 RGBLIGHT_ENABLE = yes
-RGBLIGHT_CUSTOM_DRIVER = yes
+WS2812_DRIVER = i2c
 
 OPT_DEFS = -DDEBUG_LEVEL=0
-
-SRC += i2c_master.c

keyboards/jc65/v32a/i2c.c

@@ -1,106 +0,0 @@
-/*
-Copyright 2016 Luiz Ribeiro <luizribeiro@gmail.com>
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program.  If not, see <http://www.gnu.org/licenses/>.
-*/
-
-// Please do not modify this file 
-
-#include <avr/io.h>
-#include <util/twi.h>
-
-#include "i2c.h"
-
-void i2c_set_bitrate(uint16_t bitrate_khz) {
-    uint8_t bitrate_div = ((F_CPU / 1000l) / bitrate_khz);
-    if (bitrate_div >= 16) {
-        bitrate_div = (bitrate_div - 16) / 2;
-    }
-    TWBR = bitrate_div;
-}
-
-void i2c_init(void) {
-    // set pull-up resistors on I2C bus pins
-    PORTC |= 0b11;
-
-    i2c_set_bitrate(400);
-
-    // enable TWI (two-wire interface)
-    TWCR |= (1 << TWEN);
-
-    // enable TWI interrupt and slave address ACK
-    TWCR |= (1 << TWIE);
-    TWCR |= (1 << TWEA);
-}
-
-uint8_t i2c_start(uint8_t address) {
-    // reset TWI control register
-    TWCR = 0;
-
-    // begin transmission and wait for it to end
-    TWCR = (1<<TWINT) | (1<<TWSTA) | (1<<TWEN);
-    while (!(TWCR & (1<<TWINT)));
-
-    // check if the start condition was successfully transmitted
-    if ((TWSR & 0xF8) != TW_START) {
-        return 1;
-    }
-
-    // transmit address and wait
-    TWDR = address;
-    TWCR = (1<<TWINT) | (1<<TWEN);
-    while (!(TWCR & (1<<TWINT)));
-
-    // check if the device has acknowledged the READ / WRITE mode
-    uint8_t twst = TW_STATUS & 0xF8;
-    if ((twst != TW_MT_SLA_ACK) && (twst != TW_MR_SLA_ACK)) {
-        return 1;
-    }
-
-    return 0;
-}
-
-void i2c_stop(void) {
-    TWCR = (1<<TWINT) | (1<<TWEN) | (1<<TWSTO);
-}
-
-uint8_t i2c_write(uint8_t data) {
-    TWDR = data;
-
-    // transmit data and wait
-    TWCR = (1<<TWINT) | (1<<TWEN);
-    while (!(TWCR & (1<<TWINT)));
-
-    if ((TWSR & 0xF8) != TW_MT_DATA_ACK) {
-        return 1;
-    }
-
-    return 0;
-}
-
-uint8_t i2c_send(uint8_t address, uint8_t *data, uint16_t length) {
-    if (i2c_start(address)) {
-        return 1;
-    }
-
-    for (uint16_t i = 0; i < length; i++) {
-        if (i2c_write(data[i])) {
-            return 1;
-        }
-    }
-
-    i2c_stop();
-
-    return 0;
-}

keyboards/jc65/v32a/i2c.h

@@ -1,27 +0,0 @@
-/*
-Copyright 2016 Luiz Ribeiro <luizribeiro@gmail.com>
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program.  If not, see <http://www.gnu.org/licenses/>.
-*/
-
-// Please do not modify this file 
-
-#ifndef __I2C_H__
-#define __I2C_H__
-
-void i2c_init(void);
-void i2c_set_bitrate(uint16_t bitrate_khz);
-uint8_t i2c_send(uint8_t address, uint8_t *data, uint16_t length);
-
-#endif

keyboards/jc65/v32a/rules.mk

@@ -1,18 +1,3 @@
-# Copyright 2017 Luiz Ribeiro <luizribeiro@gmail.com>
-#
-# This program is free software: you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation, either version 2 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program.  If not, see <http://www.gnu.org/licenses/>.
-
 # MCU name
 MCU = atmega32a
 
@@ -34,10 +19,10 @@ CONSOLE_ENABLE = yes
 COMMAND_ENABLE = yes
 BACKLIGHT_ENABLE = yes
 RGBLIGHT_ENABLE = yes
-RGBLIGHT_CUSTOM_DRIVER = yes
+WS2812_DRIVER = i2c
 
 OPT_DEFS = -DDEBUG_LEVEL=0
 
 # custom matrix setup
 CUSTOM_MATRIX = yes
-SRC = matrix.c i2c.c
+SRC = matrix.c

keyboards/jc65/v32a/v32a.c

@@ -16,56 +16,36 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */
 
 #include "v32a.h"
-#ifdef BACKLIGHT_ENABLE
-#include "backlight.h"
-#endif
-#ifdef RGBLIGHT_ENABLE
-#include "rgblight.h"
-#endif
-
-#include <avr/pgmspace.h>
-
-#include "action_layer.h"
-#include "i2c.h"
-#include "quantum.h"
-
-#ifdef RGBLIGHT_ENABLE
-extern rgblight_config_t rgblight_config;
-
-void rgblight_set(void) {
-    if (!rgblight_config.enable) {
-        for (uint8_t i = 0; i < RGBLED_NUM; i++) {
-            led[i].r = 0;
-            led[i].g = 0;
-            led[i].b = 0;
-        }
-    }
-
-    i2c_init();
-    i2c_send(0xb0, (uint8_t*)led, 3 * RGBLED_NUM);
-}
-#endif
 
 __attribute__ ((weak))
-void matrix_scan_user(void) {
-#ifdef RGBLIGHT_ENABLE
-  rgblight_task();
-#endif
-}
+void matrix_scan_user(void) {}
 
 #ifdef BACKLIGHT_ENABLE
 void backlight_init_ports(void) {
-	DDRD |= (1<<0 | 1<<1 | 1<<4 | 1<<6);
-	PORTD &= ~(1<<0 | 1<<1 | 1<<4 | 1<<6);
+	setPinOutput(D0);
+	setPinOutput(D1);
+	setPinOutput(D4);
+	setPinOutput(D6);
+
+	writePinLow(D0);
+	writePinLow(D1);
+	writePinLow(D4);
+	writePinLow(D6);
 }
 
 void backlight_set(uint8_t level) {
 	if (level == 0) {
 		// Turn out the lights
-		PORTD &= ~(1<<0 | 1<<1 | 1<<4 | 1<<6);
+		writePinLow(D0);
+		writePinLow(D1);
+		writePinLow(D4);
+		writePinLow(D6);
 	} else {
 		// Turn on the lights
-		PORTD |= (1<<0 | 1<<1 | 1<<4 | 1<<6);
+		writePinHigh(D0);
+		writePinHigh(D1);
+		writePinHigh(D4);
+		writePinHigh(D6);
 	}
 }
 #endif

keyboards/jj4x4/jj4x4.c

@@ -17,40 +17,3 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */
 
 #include "jj4x4.h"
-
-#ifdef RGBLIGHT_ENABLE
-
-#include <string.h>
-#include "i2c_master.h"
-#include "rgblight.h"
-
-extern rgblight_config_t rgblight_config;
-
-void matrix_init_kb(void) {
-  i2c_init();
-  // call user level keymaps, if any
-  matrix_init_user();
-}
-// custom RGB driver
-void rgblight_set(void) {
-  if (!rgblight_config.enable) {
-    memset(led, 0, 3 * RGBLED_NUM);
-  }
-
-  i2c_transmit(0xb0, (uint8_t*)led, 3 * RGBLED_NUM, 100);
-}
-
-bool rgb_init = false;
-
-void matrix_scan_kb(void) {
-  // if LEDs were previously on before poweroff, turn them back on
-  if (rgb_init == false && rgblight_config.enable) {
-    i2c_transmit(0xb0, (uint8_t*)led, 3 * RGBLED_NUM, 100);
-    rgb_init = true;
-  }
-
-  rgblight_task();
-  matrix_scan_user();
-}
-
-#endif

keyboards/jj4x4/rules.mk

@@ -1,18 +1,3 @@
-# Copyright 2017 Luiz Ribeiro <luizribeiro@gmail.com>
-#
-# This program is free software: you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation, either version 2 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program.  If not, see <http://www.gnu.org/licenses/>.
-
 # MCU name
 MCU = atmega32a
 
@@ -40,7 +25,7 @@ SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
 NKRO_ENABLE = no            # USB Nkey Rollover
 BACKLIGHT_ENABLE = yes      # Enable keyboard backlight functionality on B7 by default
 RGBLIGHT_ENABLE = yes       # Enable keyboard RGB underglow
-RGBLIGHT_CUSTOM_DRIVER = yes
+WS2812_DRIVER = i2c
 MIDI_ENABLE = no            # MIDI support (+2400 to 4200, depending on config)
 UNICODE_ENABLE = no         # Unicode
 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
@@ -48,6 +33,4 @@ AUDIO_ENABLE = no           # Audio output on port C6
 FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
 HD44780_ENABLE = no 		# Enable support for HD44780 based LCDs (+400)
 
-SRC += i2c_master.c
-
 LAYOUTS = ortho_4x4

keyboards/jj50/i2c.c

@@ -1,104 +0,0 @@
-/*
-Copyright 2016 Luiz Ribeiro <luizribeiro@gmail.com>
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program.  If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#include <avr/io.h>
-#include <util/twi.h>
-
-#include "i2c.h"
-
-void i2c_set_bitrate(uint16_t bitrate_khz) {
-    uint8_t bitrate_div = ((F_CPU / 1000l) / bitrate_khz);
-    if (bitrate_div >= 16) {
-        bitrate_div = (bitrate_div - 16) / 2;
-    }
-    TWBR = bitrate_div;
-}
-
-void i2c_init(void) {
-    // set pull-up resistors on I2C bus pins
-    PORTC |= 0b11;
-
-    i2c_set_bitrate(400);
-
-    // enable TWI (two-wire interface)
-    TWCR |= (1 << TWEN);
-
-    // enable TWI interrupt and slave address ACK
-    TWCR |= (1 << TWIE);
-    TWCR |= (1 << TWEA);
-}
-
-uint8_t i2c_start(uint8_t address) {
-    // reset TWI control register
-    TWCR = 0;
-
-    // begin transmission and wait for it to end
-    TWCR = (1<<TWINT) | (1<<TWSTA) | (1<<TWEN);
-    while (!(TWCR & (1<<TWINT)));
-
-    // check if the start condition was successfully transmitted
-    if ((TWSR & 0xF8) != TW_START) {
-        return 1;
-    }
-
-    // transmit address and wait
-    TWDR = address;
-    TWCR = (1<<TWINT) | (1<<TWEN);
-    while (!(TWCR & (1<<TWINT)));
-
-    // check if the device has acknowledged the READ / WRITE mode
-    uint8_t twst = TW_STATUS & 0xF8;
-    if ((twst != TW_MT_SLA_ACK) && (twst != TW_MR_SLA_ACK)) {
-        return 1;
-    }
-
-    return 0;
-}
-
-void i2c_stop(void) {
-    TWCR = (1<<TWINT) | (1<<TWEN) | (1<<TWSTO);
-}
-
-uint8_t i2c_write(uint8_t data) {
-    TWDR = data;
-
-    // transmit data and wait
-    TWCR = (1<<TWINT) | (1<<TWEN);
-    while (!(TWCR & (1<<TWINT)));
-
-    if ((TWSR & 0xF8) != TW_MT_DATA_ACK) {
-        return 1;
-    }
-
-    return 0;
-}
-
-uint8_t i2c_send(uint8_t address, uint8_t *data, uint16_t length) {
-    if (i2c_start(address)) {
-        return 1;
-    }
-
-    for (uint16_t i = 0; i < length; i++) {
-        if (i2c_write(data[i])) {
-            return 1;
-        }
-    }
-
-    i2c_stop();
-
-    return 0;
-}

keyboards/jj50/i2c.h

@@ -1,25 +0,0 @@
-/*
-Copyright 2016 Luiz Ribeiro <luizribeiro@gmail.com>
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program.  If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#ifndef __I2C_H__
-#define __I2C_H__
-
-void i2c_init(void);
-void i2c_set_bitrate(uint16_t bitrate_khz);
-uint8_t i2c_send(uint8_t address, uint8_t *data, uint16_t length);
-
-#endif

keyboards/jj50/jj50.c

@@ -17,24 +17,20 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #include "jj50.h"
 
-#include <avr/pgmspace.h>
-
-#include "action_layer.h"
-#include "i2c.h"
-#include "quantum.h"
-
 #include "backlight.h"
 #include "backlight_custom.h"
 
-// for keyboard subdirectory level init functions
-// @Override
-void matrix_init_kb(void) {
-    // call user level keymaps, if any
-    matrix_init_user();
-}
+void matrix_init_kb(void) { matrix_init_user(); }
+
+__attribute__ ((weak))
+void matrix_init_user(void) {}
+
+void matrix_scan_kb(void) { matrix_scan_user(); }
+
+__attribute__ ((weak))
+void matrix_scan_user(void) {}
 
 #ifdef BACKLIGHT_ENABLE
-/// Overrides functions in `quantum.c`
 void backlight_init_ports(void) {
     b_led_init_ports();
 }
@@ -47,48 +43,3 @@ void backlight_set(uint8_t level) {
     b_led_set(level);
 }
 #endif
-
-#ifdef RGBLIGHT_ENABLE
-extern rgblight_config_t rgblight_config;
-
-// custom RGB driver
-void rgblight_set(void) {
-    if (!rgblight_config.enable) {
-        for (uint8_t i=0; i<RGBLED_NUM; i++) {
-            led[i].r = 0;
-            led[i].g = 0;
-            led[i].b = 0;
-        }
-    }
-    
-    i2c_init();
-    i2c_send(0xb0, (uint8_t*)led, 3 * RGBLED_NUM);
-}
-
-bool rgb_init = false;
-
-void matrix_scan_kb(void) {
-    // if LEDs were previously on before poweroff, turn them back on
-    if (rgb_init == false && rgblight_config.enable) {
-        i2c_init();
-        i2c_send(0xb0, (uint8_t*)led, 3 * RGBLED_NUM);
-        rgb_init = true;
-    }
-    
-    rgblight_task();
-#else
-    void matrix_scan_kb(void) {
-#endif
-        matrix_scan_user();
-        /* Nothing else for now. */
-    }
-    
-    __attribute__((weak)) // overridable
-    void matrix_init_user(void) {
-        
-    }
-    
-    __attribute__((weak)) // overridable
-    void matrix_scan_user(void) {
-        
-    }

keyboards/jj50/rules.mk

@@ -1,19 +1,3 @@
-# Copyright 2017 Luiz Ribeiro <luizribeiro@gmail.com>
-# Modified 2018 Wayne Jones (WarmCatUK) <waynekjones@gmail.com>
-
-# This program is free software: you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation, either version 2 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program.  If not, see <http://www.gnu.org/licenses/>.
-
 # MCU name
 MCU = atmega32a
 
@@ -35,22 +19,18 @@ CONSOLE_ENABLE = no
 COMMAND_ENABLE = yes
 BACKLIGHT_ENABLE = yes
 RGBLIGHT_ENABLE = yes
-RGBLIGHT_CUSTOM_DRIVER = yes
+WS2812_DRIVER = i2c
 NKRO_ENABLE = no
 # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
 
-
-DISABLE_WS2812 = no
-
 KEY_LOCK_ENABLE = yes
 # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
 SLEEP_LED_ENABLE = no    # Breathing sleep LED during USB suspend
 
-
 #OPT_DEFS = -DDEBUG_LEVEL=0
 
 # custom matrix setup
 CUSTOM_MATRIX = yes
-SRC = matrix.c i2c.c backlight.c
+SRC = matrix.c backlight.c
 
 LAYOUTS = ortho_5x12

keyboards/kbdfans/kbdpad/mk1/mk1.c

@@ -14,7 +14,7 @@
  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
 
-#include "quantum.h"
+#include "mk1.h"
 
 #define NUMLOCK_PIN D0
 

keyboards/kbdfans/kbdpad/mk1/rules.mk

@@ -1,18 +1,3 @@
-# Copyright 2017 Luiz Ribeiro <luizribeiro@gmail.com>
-#
-# This program is free software: you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation, either version 2 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program.  If not, see <http://www.gnu.org/licenses/>.
-
 # MCU name
 MCU = atmega32a
 

keyboards/keebio/iris/keymaps/jerryhcooke/config.h

@@ -1,5 +1,5 @@
 /*
-Copyright 2016 Luiz Ribeiro <luizribeiro@gmail.com>
+Copyright 2017 Danny Nguyen <danny@keeb.io>
 
 This program is free software: you can redistribute it and/or modify
 it under the terms of the GNU General Public License as published by
@@ -15,11 +15,21 @@ You should have received a copy of the GNU General Public License
 along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */
 
-// Please do not modify this file 
-
 #pragma once
 
-void i2c_init(void);
-void i2c_set_bitrate(uint16_t bitrate_khz);
-uint8_t i2c_send(uint8_t address, uint8_t *data, uint16_t length);
+// #define USE_I2C
+#define EE_HANDS
 
+#undef RGBLED_NUM
+#define RGBLIGHT_ANIMATIONS
+#define RGBLED_NUM 12
+#define RGBLIGHT_HUE_STEP 2
+#define RGBLIGHT_SAT_STEP 8
+#define RGBLIGHT_VAL_STEP 8
+
+#ifndef NO_DEBUG
+#    define NO_DEBUG
+#endif  // !NO_DEBUG
+#if !defined(NO_PRINT) && !defined(CONSOLE_ENABLE)
+#    define NO_PRINT
+#endif  // !NO_PRINT

keyboards/keebio/iris/keymaps/jerryhcooke/keymap.c

@@ -0,0 +1,39 @@
+#include QMK_KEYBOARD_H
+
+#define _QWERTY 0
+#define _LOWER 1
+#define _RAISE 2
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {[0] = LAYOUT(KC_GESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_DEL, KC_TAB, KC_Q, KC_W, KC_F, KC_P, KC_B, KC_J, KC_L, KC_U, KC_Y, KC_SCLN, KC_BSPC, KC_BSPC, KC_A, KC_R, KC_S, KC_T, KC_G, KC_M, KC_N, KC_E, KC_I, KC_O, KC_ENT, LCTL_T(KC_LGUI), KC_Z, KC_X, KC_C, KC_D, KC_V, LGUI(KC_L), MEH_T(KC_MINS), KC_K, KC_H, KC_COMM, KC_DOT, KC_SLSH, KC_RSPC, KC_LGUI, LT(1, KC_QUOT), KC_SFTENT, KC_SPC, LT(2, KC_BSLS), LALT_T(KC_APP)),
+                                                              [1] = LAYOUT(KC_MPLY, KC_NO, KC_DQUO, KC_NO, LALT(KC_F4), KC_NO, KC_P7, KC_P8, KC_P9, KC_PMNS, KC_NO, RESET, KC_MPRV, KC_END, KC_UP, KC_HOME, KC_PGUP, KC_NO, KC_P4, KC_P5, KC_P6, KC_PPLS, RGB_SAI, RGB_SAD, KC_MNXT, KC_LEFT, KC_DOWN, KC_RGHT, KC_PGDN, KC_NO, KC_P1, KC_P2, KC_P3, KC_PAST, RGB_HUI, RGB_HUD, KC_NO, KC_WBAK, KC_WFWD, KC_WSTP, KC_WREF, KC_NO, LCA(KC_DEL), KC_NLCK, KC_P0, KC_P0, KC_PDOT, KC_PENT, RGB_SPI, RGB_SPD, KC_PSCR, KC_NO, KC_LGUI, RGB_TOG, RGB_VAI, RGB_VAD),
+                                                              [2] = LAYOUT(KC_NO, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_NO, RGB_M_P, RGB_M_B, RGB_M_R, RGB_M_SW, RGB_M_K, KC_NO, KC_WH_D, KC_MS_U, KC_WH_U, KC_NO, KC_F12, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_MS_L, KC_MS_D, KC_MS_R, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO)};
+
+#ifdef ENCODER_ENABLE
+void encoder_update_user(uint8_t index, bool clockwise) {
+    if (index == 0) {
+        switch (biton32(layer_state)) {
+            case _LOWER:
+                clockwise ? tap_code(KC_MS_WH_UP) : tap_code(KC_MS_WH_DOWN);
+                break;
+            case _RAISE:
+                clockwise ? rgblight_increase_hue() : rgblight_decrease_hue();
+                break;
+            default:
+                clockwise ? tap_code(KC_AUDIO_VOL_UP) : tap_code(KC_AUDIO_VOL_DOWN);
+                break;
+        }
+    } else if (index == 1) {
+        switch (biton32(layer_state)) {
+            case _LOWER:
+                clockwise ? tap_code(KC_UP) : tap_code(KC_DOWN);
+                break;
+            case _RAISE:
+                clockwise ? tap_code(KC_MEDIA_NEXT_TRACK) : tap_code(KC_MEDIA_PREV_TRACK);
+                break;
+            default:
+                clockwise ? tap_code(KC_RIGHT) : tap_code(KC_LEFT);
+                break;
+        }
+    }
+}
+#endif  // ENCODER_ENABLE

keyboards/keebio/iris/keymaps/jerryhcooke/readme.md

@@ -0,0 +1,3 @@
+[Jerry's Iris R4 Layout](https://imgur.com/a/JLytcqS)
+
+This is a fairly modified version of the default keymap that I tinkered with to allow the rotary encoder to carry out a different function on each layer.

keyboards/keebio/iris/keymaps/jerryhcooke/rules.mk

@@ -0,0 +1,3 @@
+RGBLIGHT_ENABLE = yes 
+BACKLIGHT_ENABLE = yes 
+MOUSEKEY_ENABLE = yes

keyboards/keebio/quefrency/keymaps/bcat/config.h

@@ -1,6 +1,12 @@
 #pragma once
 
-#define USE_I2C
+/*
+ * Quefrency lacks I2C resistors on the right PCB, so the right half doesn't
+ * work independently. (Presumably the floating I2C lines cause a problem.)
+ * Using serial seems sufficiently fast in practice and allows both halves to
+ * be used independently.
+ */
+#define USE_SERIAL
 
 /* Use an extra LED on the right side since it's wider on the 65% PCB. */
 #undef RGBLED_NUM

keyboards/kudox/kudox.h

@@ -19,5 +19,8 @@
 #ifdef KEYBOARD_kudox_rev1
     #include "rev1.h"
 #endif
+#ifdef KEYBOARD_kudox_rev2
+    #include "rev2.h"
+#endif
 
 #include "quantum.h"

keyboards/kudox/readme.md

@@ -5,22 +5,25 @@
 </p>
 
 <p align="center">
-<img src="https://raw.githubusercontent.com/kumaokobo/kudox-keyboard/master/img/kudox-pcb.jpg" alt="Kudox PCB rev1.0" width="600"/>
+<img src="https://raw.githubusercontent.com/kumaokobo/kudox-keyboard/master/img/kudox-pcb.jpg" alt="Kudox PCB rev2.0" width="600"/>
 </p>
 
 - Keyboard Maintainer: [Kumao Kobo](https://github.com/kumaokobo)  
-- Hardware Supported: Kudox PCB rev1.0 w/ Pro Micro  
+- Hardware Supported: Kudox PCB rev1.0 rev2.0 w/ Pro Micro  
 
 Make example for this keyboard (after setting up your build environment):
 
 ```sh
-make kudox/rev1:default
+make kudox/rev2:default
 ```
 
+
 Example of flashing this keyboard:
 
 ```sh
-make kudox/rev1:default:avrdude
+make kudox/rev2:default:flash
 ```
 
+*keymaps/default is for rev2.0. If you want to use rev1.0, you should remove Left-06 key and Right-06 key.*
+
 See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

keyboards/kudox/rev1/info.json

@@ -1,9 +1,7 @@
 {
-    "keyboard_name": "Kudox Keyboard",
-    "url": "",
+    "url": "http://kumaokobo.com/",
     "maintainer": "Kumao Kobo",
-    "width": 17,
-    "height": 6,
+    "keyboard_name": "Kudox Keyboard Rev1",
     "layouts": {
         "LAYOUT": {
             "layout": [

keyboards/kudox/rev2/config.h

@@ -0,0 +1,91 @@
+/* Copyright 2019 Kumao Kobo <kumaokobo@gmail.com>
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0xFEED
+#define PRODUCT_ID      0x9690
+#define DEVICE_VER      0x0200
+#define MANUFACTURER    Kumao Kobo
+#define PRODUCT         The Kudox Keyboard
+#define DESCRIPTION     Split row staggered 5x7 custom keyboard
+
+/* key matrix size */
+// Rows are doubled-up
+#define MATRIX_ROWS 10
+#define MATRIX_COLS 7
+
+// wiring of each half
+#define MATRIX_ROW_PINS { D4, D7, E6, B4, B5 }
+#define MATRIX_COL_PINS { F5, F6, F7, B1, B3, B2, B6 }
+// #define MATRIX_COL_PINS { B6, B2, B3, B1, F7, F6, F5} //uncomment this line and comment line above if you need to reverse left-to-right key order
+
+/* COL2ROW or ROW2COL */
+#define DIODE_DIRECTION COL2ROW
+
+/* define if matrix has ghost */
+//#define MATRIX_HAS_GHOST
+
+/* number of backlight levels */
+// #define BACKLIGHT_LEVELS 3
+
+/* Set 0 if debouncing isn't needed */
+#define DEBOUNCE 5
+
+/* serial.c configuration for split keyboard */
+#define SOFT_SERIAL_PIN D0
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* ws2812 RGB LED */
+#define RGB_DI_PIN D3
+
+#undef RGBLED_NUM
+#define RGBLED_NUM 14    // Number of LEDs
+#define RGBLIGHT_ANIMATIONS
+#define RGBLIGHT_HUE_STEP 8
+#define RGBLIGHT_SAT_STEP 8
+#define RGBLIGHT_VAL_STEP 8
+
+/*
+ * Feature disable options
+ *  These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+// #define NO_DEBUG
+
+/* disable print */
+// #define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+//#define NO_ACTION_MACRO
+//#define NO_ACTION_FUNCTION
+
+#define MOUSEKEY_INTERVAL       20
+#define MOUSEKEY_DELAY          0
+#define MOUSEKEY_TIME_TO_MAX    60
+#define MOUSEKEY_MAX_SPEED      7
+#define MOUSEKEY_WHEEL_DELAY 0

keyboards/kudox/rev2/info.json

@@ -0,0 +1,77 @@
+{
+    "url": "http://kumaokobo.com/",
+    "maintainer": "Kumao Kobo",
+    "keyboard_name": "Kudox Keyboard Rev2",
+    "layouts": {
+        "LAYOUT": {
+            "layout": [
+                {"label":"Esc", "x":0, "y":0},
+                {"label":"1", "x":1, "y":0},
+                {"label":"2", "x":2, "y":0},
+                {"label":"3", "x":3, "y":0},
+                {"label":"4", "x":4, "y":0},
+                {"label":"5", "x":5, "y":0},
+                {"label":"`", "x":6, "y":0},
+                {"label":"6", "x":10, "y":0},
+                {"label":"7", "x":11, "y":0},
+                {"label":"8", "x":12, "y":0},
+                {"label":"9", "x":13, "y":0},
+                {"label":"0", "x":14, "y":0},
+                {"label":"-", "x":15, "y":0},
+                {"label":"\u2190", "x":16, "y":0},
+                {"label":"Tab", "x":0, "y":1, "w":1.25},
+                {"label":"Q", "x":1.25, "y":1},
+                {"label":"W", "x":2.25, "y":1},
+                {"label":"E", "x":3.25, "y":1},
+                {"label":"R", "x":4.25, "y":1},
+                {"label":"T", "x":5.25, "y":1},
+                {"label":"LANG2", "x":6.25, "y":1},
+                {"label":"Y", "x":9.75, "y":1},
+                {"label":"U", "x":10.75, "y":1},
+                {"label":"I", "x":11.75, "y":1},
+                {"label":"O", "x":12.75, "y":1},
+                {"label":"P", "x":13.75, "y":1},
+                {"label":"/", "x":14.75, "y":1},
+                {"label":"\\", "x":15.75, "y":1, "w":1.25},
+                {"label":"Ctrl", "x":0, "y":2, "w":1.75},
+                {"label":"A", "x":1.75, "y":2},
+                {"label":"S", "x":2.75, "y":2},
+                {"label":"D", "x":3.75, "y":2},
+                {"label":"F", "x":4.75, "y":2},
+                {"label":"G", "x":5.75, "y":2},
+                {"label":"H", "x":10.25, "y":2},
+                {"label":"J", "x":11.25, "y":2},
+                {"label":"K", "x":12.25, "y":2},
+                {"label":"L", "x":13.25, "y":2},
+                {"label":";", "x":14.25, "y":2},
+                {"label":"Enter", "x":15.25, "y":2, "w":1.75},
+                {"label":"Shift", "x":0, "y":3, "w":2.25},
+                {"label":"Z", "x":2.25, "y":3},
+                {"label":"X", "x":3.25, "y":3},
+                {"label":"C", "x":4.25, "y":3},
+                {"label":"V", "x":5.25, "y":3},
+                {"label":"B", "x":6.25, "y":3},
+                {"label":"LANG1", "x":9.75, "y":3},
+                {"label":"N", "x":10.75, "y":3},
+                {"label":"M", "x":11.75, "y":3},
+                {"label":",", "x":12.75, "y":3},
+                {"label":".", "x":13.75, "y":3},
+                {"label":"Shift", "x":14.75, "y":3, "w":2.25},
+                {"label":"Alt", "x":0, "y":4, "w":1.25},
+                {"label":"'", "x":1.25, "y":4},
+                {"label":"-", "x":2.25, "y":4},
+                {"label":"=", "x":3.25, "y":4},
+                {"label":"layer", "x":4.25, "y":4.33, "w":1.25},
+                {"label":"GUI", "x":5.5, "y":4.67},
+                {"label":"Space", "x":6.5, "y":5},
+                {"label":"Enter", "x":9.5, "y":5},
+                {"label":"Del", "x":10.5, "y":4.67},
+                {"label":"layer", "x":11.5, "y":4.33, "w":1.25},
+                {"label":"\u2190", "x":12.75, "y":4},
+                {"label":"\u2193", "x":13.75, "y":4},
+                {"label":"\u2191", "x":14.75, "y":4},
+                {"label":"\u2192", "x":15.75, "y":4, "w":1.25}
+            ]
+        }
+    }
+}

keyboards/kudox/rev2/keymaps/default/config.h

@@ -0,0 +1,17 @@
+/* Copyright 2019 Kumao Kobo <kumaokobo@gmail.com>
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once

keyboards/kudox/rev2/keymaps/default/keymap.c

@@ -0,0 +1,49 @@
+#include QMK_KEYBOARD_H
+
+// Each layer gets a name for readability, which is then used in the keymap matrix below.
+// The underscores don't mean anything - you can have a layer called STUFF or any other name.
+// Layer names don't all need to be of the same length, obviously, and you can also skip them
+// entirely and just use numbers.
+#define _QWERTY 0
+#define _SYMB 1
+
+// Shortcut to make keymap more readable
+#define SYM_L   MO(_SYMB)
+
+#define KC_ALES LALT_T(KC_ESC)
+
+#define KC_RGENT MT(KC_RGUI, KC_ENT)
+
+#define KC_L1SYM LT(_SYMB, KC_LANG1)
+#define KC_L2SYM LT(_SYMB, KC_LANG2)
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+  [_QWERTY] = LAYOUT(
+  //┌────────┬────────┬────────┬────────┬────────┬────────┬────────┐                ┌────────┬────────┬────────┬────────┬────────┬────────┬────────┐
+     KC_ESC  ,KC_1    ,KC_2    ,KC_3    ,KC_4    ,KC_5    ,KC_GRV  ,                 KC_6    ,KC_7    ,KC_8    ,KC_9    ,KC_0    ,KC_MINS ,KC_BSPC ,
+  //├────────┼────────┼────────┼────────┼────────┼────────┼────────┤                ├────────┼────────┼────────┼────────┼────────┼────────┼────────┤
+     KC_TAB  ,KC_Q    ,KC_W    ,KC_E    ,KC_R    ,KC_T    ,KC_L2SYM,                 KC_Y    ,KC_U    ,KC_I    ,KC_O    ,KC_P    ,KC_SLSH ,KC_BSLS ,
+  //├────────┼────────┼────────┼────────┼────────┼────────┼────────┘                └────────┼────────┼────────┼────────┼────────┼────────┼────────┤
+     KC_LCTL ,KC_A    ,KC_S    ,KC_D    ,KC_F    ,KC_G    ,                                   KC_H    ,KC_J    ,KC_K    ,KC_L    ,KC_SCLN ,KC_ENT  ,
+  //├────────┼────────┼────────┼────────┼────────┼────────┤                                  ├────────┼────────┼────────┼────────┼────────┼────────┤
+     KC_LSFT ,KC_Z    ,KC_X    ,KC_C    ,KC_V    ,KC_B    ,                                   KC_L1SYM,KC_N    ,KC_M    ,KC_COMM ,KC_DOT  ,KC_RSFT ,
+  //├────────┼────────┼────────┼────────┼────────┼────────┼────────┐                ┌────────┼────────┼────────┴────────┼────────┼────────┼────────┤
+     KC_ALES ,KC_QUOT ,KC_MINS ,KC_EQL  ,KC_ENT  ,KC_LGUI ,KC_SPC  ,                 KC_RGENT,KC_DEL  ,SYM_L   ,KC_LEFT ,KC_DOWN ,KC_UP   ,KC_RGHT
+  //└────────┴────────┴────────┴────────┴────────┴────────┴────────┘                └────────┴────────┴────────┴────────┴────────┴────────┴────────┘
+  ),
+
+  [_SYMB] = LAYOUT(
+  //┌────────┬────────┬────────┬────────┬────────┬────────┬────────┐                ┌────────┬────────┬────────┬────────┬────────┬────────┬────────┐
+     KC_ESC  ,KC_F1   ,KC_F2   ,KC_F3   ,KC_F4   ,KC_F5   ,_______ ,                 KC_F6   ,KC_F7   ,KC_F8   ,KC_F9   ,KC_F10  ,KC_F11  ,KC_F12  ,
+  //├────────┼────────┼────────┼────────┼────────┼────────┼────────┤                ├────────┼────────┼────────┼────────┼────────┼────────┼────────┤
+     _______ ,KC_DQUO ,KC_QUOT ,KC_GRV  ,KC_ASTR ,KC_PLUS ,KC_EQL  ,                 KC_LPRN ,KC_RPRN ,KC_PIPE ,KC_ASTR ,KC_TILD ,KC_CIRC ,KC_JYEN ,
+  //├────────┼────────┼────────┼────────┼────────┼────────┼────────┘                └────────┼────────┼────────┼────────┼────────┼────────┼────────┤
+     _______ ,KC_AT   ,KC_COLN ,KC_GRV  ,_______ ,KC_MINS ,                                   KC_LBRC ,KC_RBRC ,KC_DOT  ,KC_SLSH ,KC_MINS ,_______ ,
+  //├────────┼────────┼────────┼────────┼────────┼────────┤                                  ├────────┼────────┼────────┼────────┼────────┼────────┤
+     _______ ,XXXXXXX ,XXXXXXX ,XXXXXXX ,KC_DOT  ,KC_SLSH ,                                   _______ ,KC_LCBR ,KC_RCBR ,KC_DOT  ,KC_SLSH ,_______ ,
+  //├────────┼────────┼────────┼────────┼────────┼────────┼────────┐                ┌────────┼────────┼────────┴────────┼────────┼────────┼────────┤
+     _______ ,_______ ,_______ ,_______ ,_______ ,_______ ,_______ ,                 _______ ,_______ ,_______ ,KC_LT   ,KC_UNDS ,KC_CIRC ,KC_GT
+  //└────────┴────────┴────────┴────────┴────────┴────────┴────────┘                └────────┴────────┴────────┴────────┴────────┴────────┴────────┘
+  )
+};

keyboards/kudox/rev2/keymaps/default/readme.md

@@ -0,0 +1,3 @@
+# The default keymap for Kudox Keyboard Rev2.0
+
+Left-06 key and Right-06 key are different between Rev1.0 and Rev2.0.

keyboards/kudox/rev2/keymaps/jis/config.h

@@ -0,0 +1,17 @@
+/* Copyright 2019 Kumao Kobo <kumaokobo@gmail.com>
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once

keyboards/kudox/rev2/keymaps/jis/keymap.c

@@ -0,0 +1,48 @@
+#include QMK_KEYBOARD_H
+#include"keymap_jp.h"
+
+// Each layer gets a name for readability, which is then used in the keymap matrix below.
+// The underscores don't mean anything - you can have a layer called STUFF or any other name.
+// Layer names don't all need to be of the same length, obviously, and you can also skip them
+// entirely and just use numbers.
+#define _QWERTY 0
+#define _SYMB 1
+
+// Shortcut to make keymap more readable
+#define SYM_L   MO(_SYMB)
+
+#define KC_ALES LALT_T(KC_ESC)
+
+#define KC_L1SYM LT(_SYMB, KC_LANG1)
+#define KC_L2SYM LT(_SYMB, KC_LANG2)
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+[_QWERTY] = LAYOUT(
+  //┌────────┬────────┬────────┬────────┬────────┬────────┬────────┐                ┌────────┬────────┬────────┬────────┬────────┬────────┬────────┐
+     KC_GRV  ,KC_1    ,KC_2    ,KC_3    ,KC_4    ,KC_5    ,KC_ESC  ,                 KC_6    ,KC_7    ,KC_8    ,KC_9    ,KC_0    ,KC_MINS ,KC_BSPC ,
+  //├────────┼────────┼────────┼────────┼────────┼────────┼────────┤                ├────────┼────────┼────────┼────────┼────────┼────────┼────────┤
+     KC_TAB  ,KC_Q    ,KC_W    ,KC_E    ,KC_R    ,KC_T    ,KC_LANG2,                 KC_Y    ,KC_U    ,KC_I    ,KC_O    ,KC_P    ,JP_AT   ,JP_COLN ,
+  //├────────┼────────┼────────┼────────┼────────┼────────┼────────┘                └────────┼────────┼────────┼────────┼────────┼────────┼────────┤
+     KC_LCTL ,KC_A    ,KC_S    ,KC_D    ,KC_F    ,KC_G    ,                                   KC_H    ,KC_J    ,KC_K    ,KC_L    ,KC_SCLN ,KC_ENT  ,
+  //├────────┼────────┼────────┼────────┼────────┼────────┤                                  ├────────┼────────┼────────┼────────┼────────┼────────┤
+     KC_LSFT ,KC_Z    ,KC_X    ,KC_C    ,KC_V    ,KC_B    ,                                   KC_UP   ,KC_N    ,KC_M    ,KC_SLSH ,JP_UNDS ,KC_RSFT ,
+  //├────────┼────────┼────────┼────────┼────────┼────────┼────────┐                ┌────────┼────────┼────────┴────────┼────────┼────────┼────────┤
+     KC_ALES ,KC_LGUI ,KC_LALT ,KC_DEL  ,KC_L2SYM,KC_SPC  ,KC_ENT  ,                 KC_LEFT ,KC_DOWN ,KC_RGHT ,KC_COMM ,KC_DOT  ,KC_L1SYM,JP_BSLS
+  //└────────┴────────┴────────┴────────┴────────┴────────┴────────┘                └────────┴────────┴────────┴────────┴────────┴────────┴────────┘
+  ),
+
+  [_SYMB] = LAYOUT(
+  //┌────────┬────────┬────────┬────────┬────────┬────────┬────────┐                ┌────────┬────────┬────────┬────────┬────────┬────────┬────────┐
+     KC_ESC  ,KC_F1   ,KC_F2   ,KC_F3   ,KC_F4   ,KC_F5   ,_______ ,                 KC_F6   ,KC_F7   ,KC_F8   ,KC_F9   ,KC_F10  ,KC_F11  ,KC_F12  ,
+  //├────────┼────────┼────────┼────────┼────────┼────────┼────────┤                ├────────┼────────┼────────┼────────┼────────┼────────┼────────┤
+     _______ ,JP_LPRN ,JP_RPRN ,XXXXXXX ,XXXXXXX ,XXXXXXX ,_______ ,                 JP_HASH ,JP_DLR  ,JP_PERC ,JP_PLUS ,KC_MINS ,JP_CIRC ,JP_YEN  ,
+  //├────────┼────────┼────────┼────────┼────────┼────────┼────────┘                └────────┼────────┼────────┼────────┼────────┼────────┼────────┤
+     _______ ,JP_LBRC ,JP_RBRC ,XXXXXXX ,XXXXXXX ,XXXXXXX ,                                   JP_AMPR ,KC_SLSH ,JP_ASTR ,KC_SCLN ,JP_COLN ,_______ ,
+  //├────────┼────────┼────────┼────────┼────────┼────────┤                                  ├────────┼────────┼────────┼────────┼────────┼────────┤
+     _______ ,JP_LCBR ,JP_RCBR ,XXXXXXX ,XXXXXXX ,XXXXXXX ,                                   KC_VOLU ,XXXXXXX ,XXXXXXX ,KC_LT   ,KC_GT   ,_______ ,
+  //├────────┼────────┼────────┼────────┼────────┼────────┼────────┐                ┌────────┼────────┼────────┴────────┼────────┼────────┼────────┤
+     _______ ,_______ ,KC_LT   ,KC_GT   ,KC_LANG2,_______ ,_______ ,                 KC_MUTE ,KC_VOLD ,KC_LANG1,_______ ,_______ ,_______ ,KC_DEL
+  //└────────┴────────┴────────┴────────┴────────┴────────┴────────┘                └────────┴────────┴────────┴────────┴────────┴────────┴────────┘
+  )
+};

keyboards/kudox/rev2/keymaps/jis/readme.md

@@ -0,0 +1,3 @@
+# The JIS keymap for Kudox Keyboard Rev2.0
+
+Left-06 key and Right-06 key are different between Rev1.0 and Rev2.0.

keyboards/kudox/rev2/rev2.h

@@ -0,0 +1,23 @@
+#pragma once
+
+#include "quantum.h"
+
+#define LAYOUT( \
+  L00, L01, L02, L03, L04, L05, L06,            R06, R05, R04, R03, R02, R01, R00, \
+  L10, L11, L12, L13, L14, L15, L16,            R16, R15, R14, R13, R12, R11, R10, \
+  L20, L21, L22, L23, L24, L25,                      R25, R24, R23, R22, R21, R20, \
+  L30, L31, L32, L33, L34, L35,                      R35, R34, R33, R32, R31, R30, \
+  L40, L41, L42, L43, L44, L45, L46,            R46, R45, R44, R43, R42, R41, R40  \
+) \
+{ \
+    { L00, L01, L02, L03, L04, L05, L06 }, \
+    { L10, L11, L12, L13, L14, L15, L16 }, \
+    { L20, L21, L22, L23, L24, L25 }, \
+    { L30, L31, L32, L33, L34, L35 }, \
+    { L40, L41, L42, L43, L44, L45, L46 }, \
+    { R00, R01, R02, R03, R04, R05, R06 }, \
+    { R10, R11, R12, R13, R14, R15, R16 }, \
+    { R20, R21, R22, R23, R24, R25 }, \
+    { R30, R31, R32, R33, R34, R35 }, \
+    { R40, R41, R42, R43, R44, R45, R46 } \
+}

keyboards/kudox/rules.mk

@@ -33,4 +33,4 @@ RGBLIGHT_ENABLE = yes       # Enable WS2812 RGB underlight.
 
 SPLIT_KEYBOARD = yes
 
-DEFAULT_FOLDER = kudox/rev1
+DEFAULT_FOLDER = kudox/rev2

keyboards/kyria/config.h

@@ -1,25 +1,18 @@
 /*
-Copyright 2016 Luiz Ribeiro <luizribeiro@gmail.com>
-
+Copyright 2019 Thomas Baart <thomas@splitkb.com>
 This program is free software: you can redistribute it and/or modify
 it under the terms of the GNU General Public License as published by
 the Free Software Foundation, either version 2 of the License, or
 (at your option) any later version.
-
 This program is distributed in the hope that it will be useful,
 but WITHOUT ANY WARRANTY; without even the implied warranty of
 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 GNU General Public License for more details.
-
 You should have received a copy of the GNU General Public License
 along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */
 
-// Please do not modify this file 
-
 #pragma once
 
-void i2c_init(void);
-void i2c_set_bitrate(uint16_t bitrate_khz);
-uint8_t i2c_send(uint8_t address, uint8_t *data, uint16_t length);
+#include "config_common.h"
 

keyboards/kyria/info.json

@@ -0,0 +1,23 @@
+{
+        "keyboard_name": "Kyria", 
+        "url": "https://splitkb.com", 
+        "maintainer": "splitkb.com", 
+        "width": 16.5, 
+        "height": 5.5, 
+        "layouts": {
+            "LAYOUT": {
+                "layout": [
+                        {"x":3, "y":0.25}, {"x":12.5, "y":0.25}, {"x":2, "y":0.5}, {"x":4, "y":0.5}, {"x":11.5, "y":0.5},
+                        {"x":13.5, "y":0.5}, {"x":5, "y":0.75}, {"x":10.5, "y":0.75}, {"x":0, "y":1}, {"x":1, "y":1},
+                        {"x":14.5, "y":1}, {"x":15.5, "y":1}, {"x":3, "y":1.25}, {"x":12.5, "y":1.25}, {"x":2, "y":1.5},  
+                        {"x":4, "y":1.5}, {"x":11.5, "y":1.5}, {"x":13.5, "y":1.5}, {"x":5, "y":1.75}, {"x":10.5, "y":1.75},
+                        {"x":0, "y":2}, {"x":1, "y":2}, {"x":14.5, "y":2}, {"x":15.5, "y":2}, {"x":3, "y":2.25},
+                        {"x":12.5, "y":2.25}, {"x":2, "y":2.5}, {"x":4, "y":2.5}, {"x":11.5, "y":2.5}, {"x":13.5, "y":2.5},
+                        {"x":5, "y":2.75}, {"x":10.5, "y":2.75}, {"x":0, "y":3}, {"x":1, "y":3}, {"x":14.5, "y":3},
+                        {"x":15.5, "y":3}, {"x":6, "y":3.25}, {"x":9.5, "y":3.25}, {"x":2.5, "y":3.5}, {"x":3.5, "y":3.5},
+                        {"x":7, "y":3.5}, {"x":8.5, "y":3.5}, {"x":12, "y":3.5}, {"x":13, "y":3.5}, {"x":4.5, "y":3.75},
+                        {"x":11, "y":3.75}, {"x":5.5, "y":4.25}, {"x":10, "y":4.25}, {"x":6.5, "y":4.5}, {"x":9, "y":4.5}
+                ]
+            }
+        }
+    }

keyboards/kyria/keymaps/default/config.h

@@ -0,0 +1,32 @@
+/* Copyright 2019 Thomas Baart <thomas@splitkb.com>
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+#ifdef OLED_DRIVER_ENABLE
+  #define OLED_DISPLAY_128X64
+#endif
+
+#ifdef RGBLIGHT_ENABLE
+  #define RGBLIGHT_ANIMATIONS
+  #define RGBLIGHT_HUE_STEP 8
+  #define RGBLIGHT_SAT_STEP 8
+  #define RGBLIGHT_VAL_STEP 8
+#endif
+
+// If you are using an Elite C rev3 on the slave side, uncomment the lines below:
+// #define SPLIT_USB_DETECT
+// #define NO_USB_STARTUP_CHECK

keyboards/kyria/keymaps/default/keymap.c

@@ -0,0 +1,219 @@
+/* Copyright 2019 Thomas Baart <thomas@splitkb.com>
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+
+enum layers {
+    _QWERTY = 0,
+    _LOWER,
+    _RAISE,
+    _ADJUST
+};
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+/* 
+ * Base Layer: QWERTY
+ *
+ * ,-------------------------------------------.                              ,-------------------------------------------.
+ * |RAIS/ESC|   Q  |   W  |   E  |   R  |   T  |                              |   Y  |   U  |   I  |   O  |   P  |  | \   |
+ * |--------+------+------+------+------+------|                              |------+------+------+------+------+--------|
+ * |Ctrl/BS |   A  |   S  |  D   |   F  |   G  |                              |   H  |   J  |   K  |   L  | ;  : |  ' "   |
+ * |--------+------+------+------+------+------+-------------.  ,-------------+------+------+------+------+------+--------|
+ * | LShift |   Z  |   X  |   C  |   V  |   B  |LShift|LShift|  |LShift|LShift|   N  |   M  | ,  < | . >  | /  ? |  - _   |
+ * `----------------------+------+------+------+------+------|  |------+------+------+------+------+----------------------'
+ *                        | GUI  | Del  | Enter| Space| Esc  |  | Enter| Space| Tab  | Bksp | AltGr|
+ *                        |      |      | Alt  | Lower| Raise|  | Lower| Raise|      |      |      |
+ *                        `----------------------------------'  `----------------------------------'
+ */
+    [_QWERTY] = LAYOUT(
+      LT(_RAISE, KC_ESC),       KC_Q,   KC_W,   KC_E,   KC_R,   KC_T,                                         KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_PIPE,
+      MT(MOD_LCTL, KC_BSPC),   KC_A,   KC_S,   KC_D,   KC_F,   KC_G,                                         KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT,
+      KC_LSFT,                 KC_Z,   KC_X,   KC_C,   KC_V,   KC_B,   KC_LSFT,   KC_LSFT, KC_LSFT, KC_LSFT, KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_MINS,
+              KC_LGUI, KC_DEL, MT(MOD_LALT, KC_ENT), LT(_LOWER, KC_SPC), LT(_RAISE, KC_ESC), LT(_LOWER, KC_ENT), LT(_RAISE, KC_SPC), KC_TAB,  KC_BSPC, KC_RALT
+    ),
+/*
+ * Lower Layer: Symbols
+ *
+ * ,-------------------------------------------.                              ,-------------------------------------------.
+ * |        |  !   |  @   |  {   |  }   |  |   |                              |      |      |      |      |      |  | \   |
+ * |--------+------+------+------+------+------|                              |------+------+------+------+------+--------|
+ * |        |  #   |  $   |  (   |  )   |  `   |                              |   +  |  -   |  /   |  *   |  %   |  ' "   |
+ * |--------+------+------+------+------+------+-------------.  ,-------------+------+------+------+------+------+--------|
+ * |        |  %   |  ^   |  [   |  ]   |  ~   |      |      |  |      |      |   &  |  =   |  ,   |  .   |  / ? | - _    |
+ * `----------------------+------+------+------+------+------|  |------+------+------+------+------+----------------------'
+ *                        |      |      |      |  ;   |  =   |  |  =   |  ;   |      |      |      |
+ *                        |      |      |      |      |      |  |      |      |      |      |      |
+ *                        `----------------------------------'  `----------------------------------'
+ */
+    [_LOWER] = LAYOUT(
+      _______, KC_EXLM, KC_AT,   KC_LCBR, KC_RCBR, KC_PIPE,                                     _______, _______, _______, _______, _______, KC_BSLS,
+      _______, KC_HASH, KC_DLR,  KC_LPRN, KC_RPRN, KC_GRV,                                      KC_PLUS, KC_MINS, KC_SLSH, KC_ASTR, KC_PERC, KC_QUOT,
+      _______, KC_PERC, KC_CIRC, KC_LBRC, KC_RBRC, KC_TILD, _______, _______, _______, _______, KC_AMPR, KC_EQL,  KC_COMM, KC_DOT,  KC_SLSH, KC_MINS,
+                                 _______, _______, _______, KC_SCLN, KC_EQL,  KC_EQL,  KC_SCLN, _______, _______, _______
+    ),
+/*
+ * Raise Layer: Number keys, media, navigation
+ *
+ * ,-------------------------------------------.                              ,-------------------------------------------.
+ * |        |   1  |  2   |  3   |  4   |  5   |                              |  6   |  7   |  8   |  9   |  0   |        |
+ * |--------+------+------+------+------+------|                              |------+------+------+------+------+--------|
+ * |        |      | Prev | Play | Next | VolUp|                              | Left | Down | Up   | Right|      |        |
+ * |--------+------+------+------+------+------+-------------.  ,-------------+------+------+------+------+------+--------|
+ * |        |      |      |      | Mute | VolDn|      |      |  |      |      | MLeft| Mdown| MUp  |MRight|      |        |
+ * `----------------------+------+------+------+------+------|  |------+------+------+------+------+----------------------'
+ *                        |      |      |      |      |      |  |      |      |      |      |      |
+ *                        |      |      |      |      |      |  |      |      |      |      |      |
+ *                        `----------------------------------'  `----------------------------------'
+ */
+    [_RAISE] = LAYOUT(
+      _______, KC_1, 	  KC_2,    KC_3,    KC_4,    KC_5,                                        KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    _______,
+      _______, _______, KC_MPRV, KC_MPLY, KC_MNXT, KC_VOLU,                                     KC_LEFT, KC_DOWN, KC_UP,   KC_RGHT, _______, _______,
+      _______, _______, _______, _______, KC_MUTE, KC_VOLD, _______, _______, _______, _______, KC_MS_L, KC_MS_D, KC_MS_U, KC_MS_R, _______, _______,
+                                 _______, _______, _______, _______, _______, _______, _______, _______, _______, _______
+    ),
+/*
+ * Adjust Layer: Function keys, RGB
+ *
+ * ,-------------------------------------------.                              ,-------------------------------------------.
+ * |        | F1   |  F2  | F3   | F4   | F5   |                              | F6   | F7   |  F8  | F9   | F10  |        |
+ * |--------+------+------+------+------+------|                              |------+------+------+------+------+--------|
+ * |        | TOG  | SAI  | HUI  | VAI  | MOD  |                              |      |      |      | F11  | F12  |        |
+ * |--------+------+------+------+------+------+-------------.  ,-------------+------+------+------+------+------+--------|
+ * |        |      | SAD  | HUD  | VAD  | RMOD |      |      |  |      |      |      |      |      |      |      |        |
+ * `----------------------+------+------+------+------+------|  |------+------+------+------+------+----------------------'
+ *                        |      |      |      |      |      |  |      |      |      |      |      |
+ *                        |      |      |      |      |      |  |      |      |      |      |      |
+ *                        `----------------------------------'  `----------------------------------'
+ */
+    [_ADJUST] = LAYOUT(
+      _______, KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,                                       KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  _______,
+      _______, RGB_TOG, RGB_SAI, RGB_HUI, RGB_VAI, RGB_MOD,                                     _______, _______, _______, KC_F11,  KC_F12,  _______,
+      _______, _______, RGB_SAD, RGB_HUD, RGB_VAD, RGB_RMOD,_______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+                                 _______, _______, _______, _______, _______, _______, _______, _______, _______, _______
+    ),
+// /*
+//  * Layer template
+//  *
+//  * ,-------------------------------------------.                              ,-------------------------------------------.
+//  * |        |      |      |      |      |      |                              |      |      |      |      |      |        |
+//  * |--------+------+------+------+------+------|                              |------+------+------+------+------+--------|
+//  * |        |      |      |      |      |      |                              |      |      |      |      |      |        |
+//  * |--------+------+------+------+------+------+-------------.  ,-------------+------+------+------+------+------+--------|
+//  * |        |      |      |      |      |      |      |      |  |      |      |      |      |      |      |      |        |
+//  * `----------------------+------+------+------+------+------|  |------+------+------+------+------+----------------------'
+//  *                        |      |      |      |      |      |  |      |      |      |      |      |
+//  *                        |      |      |      |      |      |  |      |      |      |      |      |
+//  *                        `----------------------------------'  `----------------------------------'
+//  */
+//     [_LAYERINDEX] = LAYOUT(
+//       _______, _______, _______, _______, _______, _______,                                     _______, _______, _______, _______, _______, _______,
+//       _______, _______, _______, _______, _______, _______,                                     _______, _______, _______, _______, _______, _______,
+//       _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+//                                  _______, _______, _______, _______, _______, _______, _______, _______, _______, _______
+//     ),
+};
+
+layer_state_t layer_state_set_user(layer_state_t state) {
+    return update_tri_layer_state(state, _LOWER, _RAISE, _ADJUST);
+}
+
+#ifdef OLED_DRIVER_ENABLE
+oled_rotation_t oled_init_user(oled_rotation_t rotation) {
+	return OLED_ROTATION_180;
+}
+
+static void render_kyria_logo(void) {
+    static const char PROGMEM kyria_logo[] = {
+        0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,128,128,192,224,240,112,120, 56, 60, 28, 30, 14, 14, 14,  7,  7,  7,  7,  7,  7,  7,  7,  7,  7,  7,  7,  7,  7,  7,  7, 14, 14, 14, 30, 28, 60, 56,120,112,240,224,192,128,128,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,
+        0,  0,  0,  0,  0,  0,  0,192,224,240,124, 62, 31, 15,  7,  3,  1,128,192,224,240,120, 56, 60, 28, 30, 14, 14,  7,  7,135,231,127, 31,255,255, 31,127,231,135,  7,  7, 14, 14, 30, 28, 60, 56,120,240,224,192,128,  1,  3,  7, 15, 31, 62,124,240,224,192,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,
+        0,  0,  0,  0,240,252,255, 31,  7,  1,  0,  0,192,240,252,254,255,247,243,177,176, 48, 48, 48, 48, 48, 48, 48,120,254,135,  1,  0,  0,255,255,  0,  0,  1,135,254,120, 48, 48, 48, 48, 48, 48, 48,176,177,243,247,255,254,252,240,192,  0,  0,  1,  7, 31,255,252,240,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,
+        0,  0,  0,255,255,255,  0,  0,  0,  0,  0,254,255,255,  1,  1,  7, 30,120,225,129,131,131,134,134,140,140,152,152,177,183,254,248,224,255,255,224,248,254,183,177,152,152,140,140,134,134,131,131,129,225,120, 30,  7,  1,  1,255,255,254,  0,  0,  0,  0,  0,255,255,255,  0,  0,  0,  0,255,255,  0,  0,192,192, 48, 48,  0,  0,240,240,  0,  0,  0,  0,  0,  0,240,240,  0,  0,240,240,192,192, 48, 48, 48, 48,192,192,  0,  0, 48, 48,243,243,  0,  0,  0,  0,  0,  0, 48, 48, 48, 48, 48, 48,192,192,  0,  0,  0,  0,  0,
+        0,  0,  0,255,255,255,  0,  0,  0,  0,  0,127,255,255,128,128,224,120, 30,135,129,193,193, 97, 97, 49, 49, 25, 25,141,237,127, 31,  7,255,255,  7, 31,127,237,141, 25, 25, 49, 49, 97, 97,193,193,129,135, 30,120,224,128,128,255,255,127,  0,  0,  0,  0,  0,255,255,255,  0,  0,  0,  0, 63, 63,  3,  3, 12, 12, 48, 48,  0,  0,  0,  0, 51, 51, 51, 51, 51, 51, 15, 15,  0,  0, 63, 63,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0, 48, 48, 63, 63, 48, 48,  0,  0, 12, 12, 51, 51, 51, 51, 51, 51, 63, 63,  0,  0,  0,  0,  0,
+        0,  0,  0,  0, 15, 63,255,248,224,128,  0,  0,  3, 15, 63,127,255,239,207,141, 13, 12, 12, 12, 12, 12, 12, 12, 30,127,225,128,  0,  0,255,255,  0,  0,128,225,127, 30, 12, 12, 12, 12, 12, 12, 12, 13,141,207,239,255,127, 63, 15,  3,  0,  0,128,224,248,255, 63, 15,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,
+        0,  0,  0,  0,  0,  0,  0,  3,  7, 15, 62,124,248,240,224,192,128,  1,  3,  7, 15, 30, 28, 60, 56,120,112,112,224,224,225,231,254,248,255,255,248,254,231,225,224,224,112,112,120, 56, 60, 28, 30, 15,  7,  3,  1,128,192,224,240,248,124, 62, 15,  7,  3,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,
+        0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  1,  1,  3,  7, 15, 14, 30, 28, 60, 56,120,112,112,112,224,224,224,224,224,224,224,224,224,224,224,224,224,224,224,224,112,112,112,120, 56, 60, 28, 30, 14, 15,  7,  3,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0
+    };
+    oled_write_raw_P(kyria_logo, sizeof(kyria_logo));
+}
+
+static void render_qmk_logo(void) {
+  static const char PROGMEM qmk_logo[] = {
+    0x80,0x81,0x82,0x83,0x84,0x85,0x86,0x87,0x88,0x89,0x8a,0x8b,0x8c,0x8d,0x8e,0x8f,0x90,0x91,0x92,0x93,0x94,
+    0xa0,0xa1,0xa2,0xa3,0xa4,0xa5,0xa6,0xa7,0xa8,0xa9,0xaa,0xab,0xac,0xad,0xae,0xaf,0xb0,0xb1,0xb2,0xb3,0xb4,
+    0xc0,0xc1,0xc2,0xc3,0xc4,0xc5,0xc6,0xc7,0xc8,0xc9,0xca,0xcb,0xcc,0xcd,0xce,0xcf,0xd0,0xd1,0xd2,0xd3,0xd4,0};
+
+  oled_write_P(qmk_logo, false);
+}
+
+static void render_status(void) {
+    // QMK Logo and version information
+    render_qmk_logo();
+    oled_write_P(PSTR("Kyria rev1.0\n\n"), false);
+
+    // Host Keyboard Layer Status
+    oled_write_P(PSTR("Layer: "), false);
+    switch (get_highest_layer(layer_state)) {
+        case _QWERTY:
+            oled_write_P(PSTR("Default\n"), false);
+            break;
+        case _LOWER:
+            oled_write_P(PSTR("Lower\n"), false);
+            break;
+        case _RAISE:
+            oled_write_P(PSTR("Raise\n"), false);
+            break;
+        case _ADJUST:
+            oled_write_P(PSTR("Adjust\n"), false);
+            break;
+        default:
+            oled_write_P(PSTR("Undefined\n"), false);
+    }
+
+    // Host Keyboard LED Status
+    uint8_t led_usb_state = host_keyboard_leds();
+    oled_write_P(IS_LED_ON(led_usb_state, USB_LED_NUM_LOCK) ? PSTR("NUMLCK ") : PSTR("       "), false);
+    oled_write_P(IS_LED_ON(led_usb_state, USB_LED_CAPS_LOCK) ? PSTR("CAPLCK ") : PSTR("       "), false);
+    oled_write_P(IS_LED_ON(led_usb_state, USB_LED_SCROLL_LOCK) ? PSTR("SCRLCK ") : PSTR("       "), false);
+}
+
+void oled_task_user(void) {
+    if (is_keyboard_master()) {
+        render_status(); // Renders the current keyboard state (layer, lock, caps, scroll, etc)
+    } else {
+        render_kyria_logo();
+    }
+}
+#endif
+
+#ifdef ENCODER_ENABLE
+void encoder_update_user(uint8_t index, bool clockwise) {
+    if (index == 0) {
+        // Volume control
+        if (clockwise) {
+            tap_code(KC_VOLU);
+        } else {
+            tap_code(KC_VOLD);
+        }
+    }
+    else if (index == 1) {
+        // Page up/Page down
+        if (clockwise) {
+            tap_code(KC_PGDN);
+        } else {
+            tap_code(KC_PGUP);
+        }
+    }
+}
+#endif

keyboards/kyria/keymaps/default/rules.mk

@@ -0,0 +1,3 @@
+OLED_DRIVER_ENABLE = yes   # Enables the use of OLED displays
+ENCODER_ENABLE = yes       # ENables the use of one or more encoders
+RGBLIGHT_ENABLE = yes      # Enable keyboard RGB underglow

keyboards/kyria/keymaps/thomasbaart/config.h

@@ -0,0 +1,47 @@
+/* Copyright 2019 Thomas Baart <thomas@splitkb.com>
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+#ifdef OLED_DRIVER_ENABLE
+  #define OLED_DISPLAY_128X64
+#endif
+
+#ifdef RGBLIGHT_ENABLE
+  #define RGBLIGHT_ANIMATIONS
+  #define RGBLIGHT_HUE_STEP 8
+  #define RGBLIGHT_SAT_STEP 8
+  #define RGBLIGHT_VAL_STEP 8
+  #define RGBLIGHT_SLEEP
+#endif
+
+// EC11K encoders have a different resolution than other EC11 encoders.
+// When using the default resolution of 4, if you notice your encoder skipping
+// every other tick, lower the resolution to 2.
+#define ENCODER_RESOLUTION 2
+
+// The Leader key allows to flexibly assign macros to key sequences.
+#define LEADER_PER_KEY_TIMING
+#define LEADER_TIMEOUT 350
+
+#define TAPPING_TERM 200
+
+// Allows to use either side as the master. Look at the documentation for info:
+// https://docs.qmk.fm/#/config_options?id=setting-handedness
+#define EE_HANDS
+
+// Allows media codes to properly register in macros and rotary encoder code
+#define TAP_CODE_DELAY 10

keyboards/kyria/keymaps/thomasbaart/keymap.c

@@ -0,0 +1,333 @@
+/* Copyright 2019 Thomas Baart <thomas@splitkb.com>
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+
+uint16_t copy_paste_timer;
+
+enum layers {
+    QWERTY = 0,
+    LOWER,
+    RAISE,
+    NAV,
+    ADJUST
+};
+
+enum custom_keycodes {
+    KC_CCCV = SAFE_RANGE
+};
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+/* 
+ * Base Layer: QWERTY
+ *
+ * ,-------------------------------------------.                              ,-------------------------------------------.
+ * | ESC    |   Q  |   W  |   E  |   R  |   T  |                              |   Y  |   U  |   I  |   O  |   P  |  | \   |
+ * |--------+------+------+------+------+------|                              |------+------+------+------+------+--------|
+ * | LSFT   |   A  |   S  |  D   |   F  |   G  |                              |   H  |   J  |   K  |   L  | ;  : |  ' "   |
+ * |--------+------+------+------+------+------+-------------.  ,-------------+------+------+------+------+------+--------|
+ * | LCTL   |   Z  |   X  |   C  |   V  |   B  | CCCV |      |  | Del  |Leader|   N  |   M  | ,  < | . >  | /  ? |  - _   |
+ * `----------------------+------+------+------+------+      |  |------+------+------+------+------+----------------------'
+ *                        | GUI  | Alt  |      | Space| Enter|  | Bspc | Space|      | Tab  | AltGr|
+ *                        |      |      | Lower| Shift| Alt  |  |      | Nav  | Raise|      |      |
+ *                        `----------------------------------'  `----------------------------------'
+ */
+    [QWERTY] = LAYOUT(
+      KC_ESC,  KC_Q,   KC_W,   KC_E,   KC_R,   KC_T,                                         KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_PIPE,
+      KC_LSFT, KC_A,   KC_S,   KC_D,   KC_F,   KC_G,                                         KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT,
+      KC_LCTL, KC_Z,   KC_X,   KC_C,   KC_V,   KC_B,   KC_CCCV,   XXXXXXX, KC_DEL, KC_LEAD,  KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_MINS,
+              KC_LGUI, KC_LALT, MO(LOWER), MT(MOD_LSFT, KC_SPC), MT(MOD_LALT, KC_ENT), KC_BSPC, LT(NAV, KC_SPC), MO(RAISE), KC_TAB, KC_RALT
+    ),
+/*
+ * Lower Layer: Numpad, Media
+ *
+ * ,-------------------------------------------.                              ,-------------------------------------------.
+ * |        |      |      | VolUp|      |      |                              | / ?  | 7 &  | 8 *  | 9 (  | - _  |        |
+ * |--------+------+------+------+------+------|                              |------+------+------+------+------+--------|
+ * |        |      | Prev | Play | Next |      |                              | *    | 4 $  | 5 %  | 6 ^  | , <  | +      |
+ * |--------+------+------+------+------+------+-------------.  ,-------------+------+------+------+------+------+--------|
+ * |        |      |      | VolDn| Mute |      |      |      |  |      |      | 0 )  | 1 !  | 2 @  | 3 #  | = +  |        |
+ * `----------------------+------+------+------+------+------|  |------+------+------+------+------+----------------------'
+ *                        |      |      |      |      |      |  |      |      |      |      |      |
+ *                        |      |      | Lower|      |      |  |      | Nav  | Raise|      |      |
+ *                        `----------------------------------'  `----------------------------------'
+ */
+    [LOWER] = LAYOUT(
+      _______, _______, _______, KC_VOLU, _______, _______,                                     KC_SLSH, KC_7,    KC_8,    KC_9, KC_MINS, _______,
+      _______, _______, KC_MPRV, KC_MPLY, KC_MNXT, _______,                                     KC_ASTR, KC_4,    KC_5,    KC_6, KC_COMM, KC_PLUS,
+      _______, _______, _______, KC_VOLD, KC_MUTE, _______, _______, _______, _______, _______, KC_0,    KC_1,    KC_2,    KC_3, KC_EQL,  _______,
+                                 _______, _______, _______, _______, _______, _______, _______, _______, _______, _______
+    ),
+/*
+ * Raise Layer: Symbols
+ *
+ * ,-------------------------------------------.                              ,-------------------------------------------.
+ * |        |  !   |  @   |  {   |  }   |  |   |                              |      |  _   |  €   |      |      |  \     |
+ * |--------+------+------+------+------+------|                              |------+------+------+------+------+--------|
+ * |        |  #   |  $   |  (   |  )   |  `   |                              |   +  |  -   |  /   |  *   |  %   |  ' "   |
+ * |--------+------+------+------+------+------+-------------.  ,-------------+------+------+------+------+------+--------|
+ * |        |  %   |  ^   |  [   |  ]   |  ~   |      |      |  |      |      |   &  |  =   |  ,   |  .   |  / ? | - _    |
+ * `----------------------+------+------+------+------+------|  |------+------+------+------+------+----------------------'
+ *                        |      |      |      |      |      |  |      |      |      |      |      |
+ *                        |      |      | Lower|      |      |  |      | Nav  | Raise|      |      |
+ *                        `----------------------------------'  `----------------------------------'
+ */
+    [RAISE] = LAYOUT(
+      _______, KC_EXLM, KC_AT,   KC_LCBR, KC_RCBR, KC_PIPE,                                     _______, KC_UNDS, ALGR(KC_5),_______,_______,KC_BSLS,
+      _______, KC_HASH, KC_DLR,  KC_LPRN, KC_RPRN, KC_GRV,                                      KC_PLUS, KC_MINS, KC_SLSH, KC_ASTR, KC_PERC, KC_QUOT,
+      _______, KC_PERC, KC_CIRC, KC_LBRC, KC_RBRC, KC_TILD, _______, _______, _______, _______, KC_AMPR, KC_EQL,  KC_COMM, KC_DOT,  KC_SLSH, KC_MINS,
+                                 _______, _______, _______, _______, _______, _______, _______, _______, _______, _______
+    ),
+/*
+ * Navigation Layer
+ *
+ * ,-------------------------------------------.                              ,-------------------------------------------.
+ * |        |      |      |      |      |      |                              | PgUp | Home | Up   | End  |      | ScrlLk |
+ * |--------+------+------+------+------+------|                              |------+------+------+------+------+--------|
+ * |        |      |      |      |      |      |                              | PgDn | Left | Down | Right|      | CapsLk |
+ * |--------+------+------+------+------+------+-------------.  ,-------------+------+------+------+------+------+--------|
+ * |        |      |      |      |      |      |      |      |  |      |      |      |      |      |      |      |        |
+ * `----------------------+------+------+------+------+------|  |------+------+------+------+------+----------------------'
+ *                        |      |      |      |      |      |  |      |      |      |      |      |
+ *                        |      |      | Lower|      |      |  |      | Nav  | Raise|      |      |
+ *                        `----------------------------------'  `----------------------------------'
+ */
+    [NAV] = LAYOUT(
+      _______, _______, _______, _______, _______, _______,                                     KC_PGUP, KC_HOME, KC_UP,   KC_END,  _______, KC_SLCK,
+      _______, _______, _______, _______, _______, _______,                                     KC_PGDN, KC_LEFT, KC_DOWN, KC_RGHT, _______, KC_CAPS,
+      _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+                                 _______, _______, _______, _______, _______, _______, _______, _______, _______, _______
+    ),
+/*
+ * Adjust Layer
+ *
+ * ,-------------------------------------------.                              ,-------------------------------------------.
+ * |        |      |      |      |      |      |                              |      | F7   | F8   | F9   | F10  |        |
+ * |--------+------+------+------+------+------|                              |------+------+------+------+------+--------|
+ * |        |      | SAI  | HUI  | VAI  |      |                              |      | F4   | F5   | F6   | F11  |        |
+ * |--------+------+------+------+------+------+-------------.  ,-------------+------+------+------+------+------+--------|
+ * |        |      | SAD  | HUD  | VAD  |      |      |      |  |      |      |      | F1   | F2   | F3   | F12  |        |
+ * `----------------------+------+------+------+------+------|  |------+------+------+------+------+----------------------'
+ *                        |      |      |      |      |      |  |      |      |      |      |      |
+ *                        |      |      |      |      |      |  |      |      |      |      |      |
+ *                        `----------------------------------'  `----------------------------------'
+ */
+    [ADJUST] = LAYOUT(
+      _______, _______, _______, _______, _______, _______,                                     _______, KC_F7,   KC_F8,   KC_F9,   KC_F10,  _______,
+      _______, _______, RGB_SAI, RGB_HUI, RGB_VAI, _______,                                     _______, KC_F4,   KC_F5,   KC_F6,   KC_F11,  _______,
+      _______, _______, RGB_SAD, RGB_HUD, RGB_VAD, _______, _______, _______, _______, _______, _______, KC_F1,   KC_F2,   KC_F3,   KC_F12,  _______,
+                                 _______, _______, _______, _______, _______, _______, _______, _______, _______, _______
+    ),
+// /*
+//  * Layer template
+//  *
+//  * ,-------------------------------------------.                              ,-------------------------------------------.
+//  * |        |      |      |      |      |      |                              |      |      |      |      |      |        |
+//  * |--------+------+------+------+------+------|                              |------+------+------+------+------+--------|
+//  * |        |      |      |      |      |      |                              |      |      |      |      |      |        |
+//  * |--------+------+------+------+------+------+-------------.  ,-------------+------+------+------+------+------+--------|
+//  * |        |      |      |      |      |      |      |      |  |      |      |      |      |      |      |      |        |
+//  * `----------------------+------+------+------+------+------|  |------+------+------+------+------+----------------------'
+//  *                        |      |      |      |      |      |  |      |      |      |      |      |
+//  *                        |      |      |      |      |      |  |      |      |      |      |      |
+//  *                        `----------------------------------'  `----------------------------------'
+//  */
+//     [_LAYERINDEX] = LAYOUT(
+//       _______, _______, _______, _______, _______, _______,                                     _______, _______, _______, _______, _______, _______,
+//       _______, _______, _______, _______, _______, _______,                                     _______, _______, _______, _______, _______, _______,
+//       _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+//                                  _______, _______, _______, _______, _______, _______, _______, _______, _______, _______
+//     ),
+};
+
+layer_state_t layer_state_set_user(layer_state_t state) {
+    return update_tri_layer_state(state, LOWER, RAISE, ADJUST);
+}
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+    switch (keycode) {
+        case KC_CCCV:  // One key copy/paste
+            if (record->event.pressed) {
+                copy_paste_timer = timer_read();
+            } else {
+                if (timer_elapsed(copy_paste_timer) > TAPPING_TERM) {  // Hold, copy
+                    tap_code16(LCTL(KC_C));
+                } else { // Tap, paste
+                    tap_code16(LCTL(KC_V));
+                }
+            }
+            break;
+    }
+    return true;
+}
+
+LEADER_EXTERNS();
+
+void matrix_scan_user(void) {
+    LEADER_DICTIONARY() {
+        leading = false;
+        leader_end();
+
+        SEQ_ONE_KEY(KC_C) { // Inline Code
+            SEND_STRING("`` " SS_TAP(X_LEFT) SS_TAP(X_LEFT));
+        }
+        SEQ_ONE_KEY(KC_P) { // Invoke Password Manager
+            SEND_STRING(SS_LCTRL(SS_LALT("\\")));
+        }
+        SEQ_ONE_KEY(KC_S) { // Windows screenshot
+            SEND_STRING(SS_LGUI("\nS"));
+        }
+        SEQ_TWO_KEYS(KC_F, KC_P) { // Fusion Projection prefix
+            SEND_STRING("[Projection] ");
+        }
+        SEQ_TWO_KEYS(KC_E, KC_S) { // Email splitkb
+            SEND_STRING("thomas@splitkb.com");
+        }
+        SEQ_TWO_KEYS(KC_E, KC_P) { // Email personal
+            SEND_STRING("mail@thomasbaart.nl");
+        }
+        SEQ_TWO_KEYS(KC_S, KC_D) { // Splitkb documentation
+            SEND_STRING("https://docs.splitkb.com/");
+        }
+        SEQ_TWO_KEYS(KC_S, KC_V) { // Splitkb VAT number
+            SEND_STRING("NL210593349B01");
+        }
+        SEQ_THREE_KEYS(KC_S, KC_D, KC_K) { // Splitkb Kyria build log
+            SEND_STRING("https://docs.splitkb.com/docs/kyria-build-log/");
+        }
+        SEQ_TWO_KEYS(KC_B, KC_C) { // Discord bongocat
+            SEND_STRING(":bongocat:\n");
+        }
+        SEQ_TWO_KEYS(KC_C, KC_B) { // Discord code block
+            SEND_STRING("```c" SS_LSFT("\n\n") "``` " SS_TAP(X_UP));
+        }
+    }
+}
+
+#ifdef OLED_DRIVER_ENABLE
+oled_rotation_t oled_init_user(oled_rotation_t rotation) {
+	return OLED_ROTATION_180;
+}
+
+static void render_kyria_logo(void) {
+    static const char PROGMEM kyria_logo[] = {
+        0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,128,128,192,224,240,112,120, 56, 60, 28, 30, 14, 14, 14,  7,  7,  7,  7,  7,  7,  7,  7,  7,  7,  7,  7,  7,  7,  7,  7, 14, 14, 14, 30, 28, 60, 56,120,112,240,224,192,128,128,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,
+        0,  0,  0,  0,  0,  0,  0,192,224,240,124, 62, 31, 15,  7,  3,  1,128,192,224,240,120, 56, 60, 28, 30, 14, 14,  7,  7,135,231,127, 31,255,255, 31,127,231,135,  7,  7, 14, 14, 30, 28, 60, 56,120,240,224,192,128,  1,  3,  7, 15, 31, 62,124,240,224,192,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,
+        0,  0,  0,  0,240,252,255, 31,  7,  1,  0,  0,192,240,252,254,255,247,243,177,176, 48, 48, 48, 48, 48, 48, 48,120,254,135,  1,  0,  0,255,255,  0,  0,  1,135,254,120, 48, 48, 48, 48, 48, 48, 48,176,177,243,247,255,254,252,240,192,  0,  0,  1,  7, 31,255,252,240,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,
+        0,  0,  0,255,255,255,  0,  0,  0,  0,  0,254,255,255,  1,  1,  7, 30,120,225,129,131,131,134,134,140,140,152,152,177,183,254,248,224,255,255,224,248,254,183,177,152,152,140,140,134,134,131,131,129,225,120, 30,  7,  1,  1,255,255,254,  0,  0,  0,  0,  0,255,255,255,  0,  0,  0,  0,255,255,  0,  0,192,192, 48, 48,  0,  0,240,240,  0,  0,  0,  0,  0,  0,240,240,  0,  0,240,240,192,192, 48, 48, 48, 48,192,192,  0,  0, 48, 48,243,243,  0,  0,  0,  0,  0,  0, 48, 48, 48, 48, 48, 48,192,192,  0,  0,  0,  0,  0,
+        0,  0,  0,255,255,255,  0,  0,  0,  0,  0,127,255,255,128,128,224,120, 30,135,129,193,193, 97, 97, 49, 49, 25, 25,141,237,127, 31,  7,255,255,  7, 31,127,237,141, 25, 25, 49, 49, 97, 97,193,193,129,135, 30,120,224,128,128,255,255,127,  0,  0,  0,  0,  0,255,255,255,  0,  0,  0,  0, 63, 63,  3,  3, 12, 12, 48, 48,  0,  0,  0,  0, 51, 51, 51, 51, 51, 51, 15, 15,  0,  0, 63, 63,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0, 48, 48, 63, 63, 48, 48,  0,  0, 12, 12, 51, 51, 51, 51, 51, 51, 63, 63,  0,  0,  0,  0,  0,
+        0,  0,  0,  0, 15, 63,255,248,224,128,  0,  0,  3, 15, 63,127,255,239,207,141, 13, 12, 12, 12, 12, 12, 12, 12, 30,127,225,128,  0,  0,255,255,  0,  0,128,225,127, 30, 12, 12, 12, 12, 12, 12, 12, 13,141,207,239,255,127, 63, 15,  3,  0,  0,128,224,248,255, 63, 15,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,
+        0,  0,  0,  0,  0,  0,  0,  3,  7, 15, 62,124,248,240,224,192,128,  1,  3,  7, 15, 30, 28, 60, 56,120,112,112,224,224,225,231,254,248,255,255,248,254,231,225,224,224,112,112,120, 56, 60, 28, 30, 15,  7,  3,  1,128,192,224,240,248,124, 62, 15,  7,  3,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,
+        0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  1,  1,  3,  7, 15, 14, 30, 28, 60, 56,120,112,112,112,224,224,224,224,224,224,224,224,224,224,224,224,224,224,224,224,112,112,112,120, 56, 60, 28, 30, 14, 15,  7,  3,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0
+    };
+    oled_write_raw_P(kyria_logo, sizeof(kyria_logo));
+}
+
+static void render_qmk_logo(void) {
+  static const char PROGMEM qmk_logo[] = {
+    0x80,0x81,0x82,0x83,0x84,0x85,0x86,0x87,0x88,0x89,0x8a,0x8b,0x8c,0x8d,0x8e,0x8f,0x90,0x91,0x92,0x93,0x94,
+    0xa0,0xa1,0xa2,0xa3,0xa4,0xa5,0xa6,0xa7,0xa8,0xa9,0xaa,0xab,0xac,0xad,0xae,0xaf,0xb0,0xb1,0xb2,0xb3,0xb4,
+    0xc0,0xc1,0xc2,0xc3,0xc4,0xc5,0xc6,0xc7,0xc8,0xc9,0xca,0xcb,0xcc,0xcd,0xce,0xcf,0xd0,0xd1,0xd2,0xd3,0xd4,0};
+
+  oled_write_P(qmk_logo, false);
+}
+
+static void render_status(void) {
+    // QMK Logo and version information
+    render_qmk_logo();
+    oled_write_P(PSTR("       Kyria rev1.0\n\n"), false);
+
+    // Host Keyboard Layer Status
+    oled_write_P(PSTR("Layer: "), false);
+    switch (get_highest_layer(layer_state)) {
+        case QWERTY:
+            oled_write_P(PSTR("Default\n"), false);
+            break;
+        case LOWER:
+            oled_write_P(PSTR("Lower\n"), false);
+            break;
+        case RAISE:
+            oled_write_P(PSTR("Raise\n"), false);
+            break;
+        case NAV:
+            oled_write_P(PSTR("Navigation\n"), false);
+            break;
+        case ADJUST:
+            oled_write_P(PSTR("Adjust\n"), false);
+            break;
+        default:
+            oled_write_P(PSTR("Undefined\n"), false);
+    }
+
+    // Host Keyboard LED Status
+    uint8_t led_usb_state = host_keyboard_leds();
+    oled_write_P(IS_LED_ON(led_usb_state, USB_LED_NUM_LOCK)    ? PSTR("NUMLCK ") : PSTR("       "), false);
+    oled_write_P(IS_LED_ON(led_usb_state, USB_LED_CAPS_LOCK)   ? PSTR("CAPLCK ") : PSTR("       "), false);
+    oled_write_P(IS_LED_ON(led_usb_state, USB_LED_SCROLL_LOCK) ? PSTR("SCRLCK ") : PSTR("       "), false);
+}
+
+void oled_task_user(void) {
+    if (is_keyboard_master()) {
+        render_status(); // Renders the current keyboard state (layer, lock, caps, scroll, etc)
+    } else {
+        render_kyria_logo();
+    }
+}
+#endif
+
+#ifdef ENCODER_ENABLE
+void encoder_update_user(uint8_t index, bool clockwise) {
+    if (index == 0) {
+        switch (biton32(layer_state)) {
+            case QWERTY:
+                // Move whole words. Hold shift to select while moving.
+                if (clockwise) {
+                    tap_code16(C(KC_RGHT));
+                } else {
+                    tap_code16(C(KC_LEFT));
+                }
+                break;
+            default:
+                // History scrubbing. For Adobe products, hold shift while moving
+                // backward to go forward instead.
+                if (clockwise) {
+                    tap_code16(C(KC_Z));
+                } else {
+                    tap_code16(C(KC_Y));
+                }
+                break;
+        }
+    } else if (index == 1) {
+        switch (biton32(layer_state)) {
+            case QWERTY:
+                // Scrolling with PageUp and PgDn.
+                if (clockwise) {
+                    tap_code(KC_PGDN);
+                } else {
+                    tap_code(KC_PGUP);
+                }
+                break;
+            default:
+                // Volume control.
+                if (clockwise) {
+                    tap_code(KC_VOLU);
+                } else {
+                    tap_code(KC_VOLD);
+                }
+                break;
+        }
+    }
+}
+#endif

keyboards/kyria/keymaps/thomasbaart/rules.mk

@@ -0,0 +1,5 @@
+OLED_DRIVER_ENABLE = yes   # Enables the use of OLED displays
+ENCODER_ENABLE = yes       # Enables the use of one or more encoders
+RGBLIGHT_ENABLE = yes      # Enable keyboard RGB underglow
+LEADER_ENABLE = yes        # Enable the Leader Key feature
+MOUSEKEY_ENABLE = no

keyboards/kyria/kyria.c

@@ -0,0 +1,16 @@
+/* Copyright 2019 Thomas Baart <thomas@splitkb.com>
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include "kyria.h"

keyboards/kyria/kyria.h

@@ -0,0 +1,43 @@
+/* Copyright 2019 Thomas Baart <thomas@splitkb.com>
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#pragma once
+
+#include "quantum.h"
+
+/* This a shortcut to help you visually see your layout.
+ *
+ * The first section contains all of the arguments representing the physical
+ * layout of the board and position of the keys.
+ *
+ * The second converts the arguments into a two-dimensional array which
+ * represents the switch matrix.
+ */
+#define LAYOUT( \
+    L00, L01, L02, L03, L04, L05,                     R06, R07, R08, R09, R10, R11, \
+    L12, L13, L14, L15, L16, L17,                     R18, R19, R20, R21, R22, R23, \
+    L24, L25, L26, L27, L28, L29, L30, L31, R32, R33, R34, R35, R36, R37, R38, R39, \
+                   L40, L41, L42, L43, L44, R45, R46, R47, R48, R49 \
+) \
+{ \
+    { KC_NO, KC_NO, L05,   L04,   L03,   L02,   L01,   L00   }, \
+    { KC_NO, KC_NO, L17,   L16,   L15,   L14,   L13,   L12   }, \
+    { L31,   L30,   L29,   L28,   L27,   L26,   L25,   L24   }, \
+    { L44,   L43,   L42,   L41,   L40,   KC_NO, KC_NO, KC_NO }, \
+    { KC_NO, KC_NO, R06,   R07,   R08,   R09,   R10,   R11   }, \
+    { KC_NO, KC_NO, R18,   R19,   R20,   R21,   R22,   R23   }, \
+    { R32,   R33,   R34,   R35,   R36,   R37,   R38,   R39   }, \
+    { R45,   R46,   R47,   R48,   R49,   KC_NO, KC_NO, KC_NO }, \
+}

keyboards/kyria/readme.md

@@ -0,0 +1,21 @@
+# Kyria
+
+![Kyria](https://cdn.shopify.com/s/files/1/0227/9171/6941/products/PlateCase_f1870016-98b8-43a9-8aed-3eaf073b367b_900x.jpg?v=1568934600)
+
+An ergonomical 40% split keyboard
+
+Keyboard Maintainer: [splitkb.com](https://github.com/splitkb)  
+Hardware Supported: Pro Micro 5V/16MHz and compatible.  
+Hardware Availability: [splitkb.com](https://splitkb.com) and partners.
+
+Make example for this keyboard (after setting up your build environment):
+
+    make kyria:default
+
+Example of flashing this keyboard:
+
+    make kyria/rev1:default:flash
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
+
+A build guide for the Kyria can be found at [docs.splitkb.com](https://docs.splitkb.com/docs/kyria-build-log/).

keyboards/kyria/rev1/config.h

@@ -0,0 +1,65 @@
+/*
+Copyright 2019 Thomas Baart <thomas@splitkb.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0xFEED
+#define PRODUCT_ID      0x0000
+#define DEVICE_VER      0x0001
+#define MANUFACTURER    splitkb
+#define PRODUCT         Kyria Keyboard
+#define DESCRIPTION     Split 40 percent ergonomic keyboard
+
+/* key matrix size */
+/* Rows are doubled up */
+#define MATRIX_ROWS 8
+#define MATRIX_COLS 8
+
+// wiring
+#define MATRIX_ROW_PINS { B4, E6, D7, D4 }
+#define MATRIX_COL_PINS { B6, B2, B3, B1, F7, F6, F5, F4 }
+#define UNUSED_PINS
+
+#define ENCODERS_PAD_A { C6 }
+#define ENCODERS_PAD_B { B5 }
+#define ENCODERS_PAD_A_RIGHT { B5 }
+#define ENCODERS_PAD_B_RIGHT { C6 }
+
+/* COL2ROW, ROW2COL*/
+#define DIODE_DIRECTION COL2ROW
+
+/* define if matrix has ghost (lacks anti-ghosting diodes) */
+//#define MATRIX_HAS_GHOST
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCE 5
+
+/*
+ * Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN.
+ */
+#define SOFT_SERIAL_PIN D2
+
+#define RGB_DI_PIN D3
+#define RGBLED_SPLIT { 10, 10 }
+#define RGBLED_NUM 20
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE

keyboards/kyria/rev1/rev1.c

@@ -0,0 +1 @@
+#include "rev1.h"

keyboards/kyria/rev1/rev1.h

@@ -0,0 +1,43 @@
+/* Copyright 2019 Thomas Baart <thomas@splitkb.com>
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#pragma once
+
+#include "kyria.h"
+
+/* This a shortcut to help you visually see your layout.
+ *
+ * The first section contains all of the arguments representing the physical
+ * layout of the board and position of the keys.
+ *
+ * The second converts the arguments into a two-dimensional array which
+ * represents the switch matrix.
+ */
+#define LAYOUT( \
+    L00, L01, L02, L03, L04, L05,                     R06, R07, R08, R09, R10, R11, \
+    L12, L13, L14, L15, L16, L17,                     R18, R19, R20, R21, R22, R23, \
+    L24, L25, L26, L27, L28, L29, L30, L31, R32, R33, R34, R35, R36, R37, R38, R39, \
+                   L40, L41, L42, L43, L44, R45, R46, R47, R48, R49 \
+) \
+{ \
+    { KC_NO, KC_NO, L05,   L04,   L03,   L02,   L01,   L00   }, \
+    { KC_NO, KC_NO, L17,   L16,   L15,   L14,   L13,   L12   }, \
+    { L31,   L30,   L29,   L28,   L27,   L26,   L25,   L24   }, \
+    { L44,   L43,   L42,   L41,   L40,   KC_NO, KC_NO, KC_NO }, \
+    { KC_NO, KC_NO, R06,   R07,   R08,   R09,   R10,   R11   }, \
+    { KC_NO, KC_NO, R18,   R19,   R20,   R21,   R22,   R23   }, \
+    { R32,   R33,   R34,   R35,   R36,   R37,   R38,   R39   }, \
+    { R45,   R46,   R47,   R48,   R49,   KC_NO, KC_NO, KC_NO }, \
+}

keyboards/kyria/rev1/rules.mk

@@ -0,0 +1,3 @@
+OLED_DRIVER_ENABLE = yes   # Enables the use of OLED displays
+ENCODER_ENABLE = yes       # ENables the use of one or more encoders
+RGBLIGHT_ENABLE = yes      # Enable keyboard RGB underglow

keyboards/kyria/rules.mk

@@ -0,0 +1,36 @@
+# MCU name
+MCU = atmega32u4
+
+# Bootloader selection
+#   Teensy       halfkay
+#   Pro Micro    caterina
+#   Atmel DFU    atmel-dfu
+#   LUFA DFU     lufa-dfu
+#   QMK DFU      qmk-dfu
+#   ATmega32A    bootloadHID
+#   ATmega328P   USBasp
+BOOTLOADER = atmel-dfu
+
+# Build Options
+#   change yes to no to disable
+#
+BOOTMAGIC_ENABLE = no      # Virtual DIP switch configuration
+MOUSEKEY_ENABLE = yes      # Mouse keys
+EXTRAKEY_ENABLE = yes      # Audio control and System control
+CONSOLE_ENABLE = no        # Console for debug
+COMMAND_ENABLE = no        # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no      # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = no           # USB Nkey Rollover
+BACKLIGHT_ENABLE = no      # Enable keyboard backlight functionality on B7 by default
+MIDI_ENABLE = no           # MIDI support
+UNICODE_ENABLE = no        # Unicode
+BLUETOOTH_ENABLE = no      # Enable Bluetooth with the Adafruit EZ-Key HID
+AUDIO_ENABLE = no          # Audio output on port C6
+FAUXCLICKY_ENABLE = no     # Use buzzer to emulate clicky switches
+HD44780_ENABLE = no        # Enable support for HD44780 based LCDs
+SPLIT_KEYBOARD = yes       # Split common
+LINK_TIME_OPTIMIZATION_ENABLE =yes 
+
+DEFAULT_FOLDER = kyria/rev1

keyboards/maartenwut/wasdat/wasdat.c

@@ -33,26 +33,12 @@ void led_init_ports(void) {
     setPinOutput(B2);
 }
 
-void led_set_kb(uint8_t usb_led) {
-    // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
-
-    if (IS_LED_ON(usb_led, USB_LED_CAPS_LOCK)) {
-        writePinLow(B0);
-    } else {
-        writePinHigh(B0);
+bool led_update_kb(led_t led_state) {
+    if(led_update_user(led_state)) {
+        writePin(B0, !led_state.caps_lock);
+        writePin(B1, !led_state.scroll_lock);
+        writePin(B2, !led_state.num_lock);
     }
 
-    if (IS_LED_ON(usb_led, USB_LED_SCROLL_LOCK)) {
-        writePinLow(B1);
-    } else {
-        writePinHigh(B1);
-    }
-
-    if (IS_LED_ON(usb_led, USB_LED_NUM_LOCK)) {
-        writePinLow(B2);
-    } else {
-        writePinHigh(B2);
-    }
-
-    led_set_user(usb_led);
+    return true;
 }