forked from mirror/qmk_firmware
33 lines
1.4 KiB
Markdown
33 lines
1.4 KiB
Markdown
# OWS
|
|
|
|
Open-source steno keyboard with a pseudo-split layout, designed to be compact, portable, and cost-effective.
|
|
|
|
|
|
|
|
* Keyboard maintainer: [ivndbt](https://github.com/ivndbt)
|
|
* Hardware supported: Pro Micro RP2040
|
|
* Hardware Availability: OWS is open-source, check the [project repository](https://github.com/ivndbt/obiwanstenobit)
|
|
|
|
Make example for this keyboard (after setting up your build environment):
|
|
|
|
make ivndbt/ows:default
|
|
|
|
Flashing example for this keyboard:
|
|
|
|
make ivndbt/ows:default:flash
|
|
|
|
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
|
|
|
|
## Bootloader
|
|
|
|
1. There are 4 ways to enter the bootloader:
|
|
|
|
* **Physical reset button**: Double tap the `RST` button located on the back of the Controller PCB.
|
|
* **Physical boot button**: Hold the `BOOT` button as you plug the RP2040
|
|
* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (the top-left key on the right-hand Main PCB) while plugging in the keyboard.
|
|
* **Keycode in layout**: Press the key assigned to `QK_BOOT` if it is available
|
|
|
|
2. Wait for the OS to detect the device
|
|
3. Copy the `.uf2` file to the new USB disk or flash via QMK CLI
|
|
4. Wait for the keyboard to become available
|