forked from mirror/qmk_firmware
26 lines
1.1 KiB
Markdown
26 lines
1.1 KiB
Markdown
# stardustn0
|
|
|
|
|
|
|
|
This project is a custom-built split ergonomic mechanical keyboard, using two Raspberry Pi Pico microcontrollers.
|
|
|
|
* Keyboard Maintainer: [navidyt](https://github.com/navidyt)
|
|
* Hardware Supported: Raspberry Pi Pico, MX switches, Gateron hot-swap sockets, 1N4148 diodes, generic USB-C breakout board
|
|
|
|
Make example for this keyboard (after setting up your build environment):
|
|
|
|
make stardustn0:default
|
|
|
|
Flashing example for this keyboard:
|
|
|
|
make stardustn0:default:flash
|
|
|
|
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
|
|
|
|
## Bootloader
|
|
|
|
Enter the bootloader in 3 ways:
|
|
* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
|
|
* **Physical reset button**: Briefly press the reset button on the pico while connecting USB
|
|
* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available
|