forked from mirror/qmk_firmware
27 lines
1.2 KiB
Markdown
27 lines
1.2 KiB
Markdown
# KKC Wily
|
|
|
|
The Wily is a 65% keyboard by Keyote Key Company.
|
|
|
|
* Keyboard Maintainer: [gondolindrim](https://github.com/gondolindrim)
|
|
* Hardware Supported: three PCB variants (solderable, hotswap with Tsangan bottom row, hotswap with default bottom row), both based on STM32F072
|
|
* Hardware Availability: not yet available for purchase as of november 2025.
|
|
|
|
Make example for this keyboard (after setting up your build environment):
|
|
|
|
make wily/<version>:default
|
|
|
|
Where `<version>` can be either `wily_s` , `wily_h625` or `wily_h700`. Flashing example for this keyboard:
|
|
|
|
make wily/<version>:default:flash
|
|
|
|
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
|
|
|
|
## Bootloader
|
|
|
|
Enter the bootloader in 3 ways:
|
|
|
|
* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (Escape) and plug in the keyboard
|
|
* **Physical reset button**: press and hold the button on the back of the PCB for five seconds
|
|
* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available
|
|
|