Branch point for 2020 Feb 29 Breaking Change.

* [Docs] fix installation commands for macos

* Update docs/getting_started_build_tools.md

common_features.mk

@@ -82,19 +82,19 @@ endif
 
 ifeq ($(strip $(UCIS_ENABLE)), yes)
     OPT_DEFS += -DUCIS_ENABLE
-    UNICODE_COMMON = yes
+    UNICODE_COMMON := yes
     SRC += $(QUANTUM_DIR)/process_keycode/process_ucis.c
 endif
 
 ifeq ($(strip $(UNICODEMAP_ENABLE)), yes)
     OPT_DEFS += -DUNICODEMAP_ENABLE
-    UNICODE_COMMON = yes
+    UNICODE_COMMON := yes
     SRC += $(QUANTUM_DIR)/process_keycode/process_unicodemap.c
 endif
 
 ifeq ($(strip $(UNICODE_ENABLE)), yes)
     OPT_DEFS += -DUNICODE_ENABLE
-    UNICODE_COMMON = yes
+    UNICODE_COMMON := yes
     SRC += $(QUANTUM_DIR)/process_keycode/process_unicode.c
 endif
 
@@ -107,13 +107,13 @@ ifeq ($(strip $(RGBLIGHT_ENABLE)), yes)
     OPT_DEFS += -DRGBLIGHT_ENABLE
     SRC += $(QUANTUM_DIR)/color.c
     SRC += $(QUANTUM_DIR)/rgblight.c
-    CIE1931_CURVE = yes
-    LED_BREATHING_TABLE = yes
-    RGB_KEYCODES_ENABLE = yes
+    CIE1931_CURVE := yes
+    LED_BREATHING_TABLE := yes
+    RGB_KEYCODES_ENABLE := yes
     ifeq ($(strip $(RGBLIGHT_CUSTOM_DRIVER)), yes)
         OPT_DEFS += -DRGBLIGHT_CUSTOM_DRIVER
     else
-        WS2812_DRIVER_REQUIRED = yes
+        WS2812_DRIVER_REQUIRED := yes
     endif
 endif
 
@@ -147,12 +147,12 @@ endif
     SRC += $(QUANTUM_DIR)/color.c
     SRC += $(QUANTUM_DIR)/rgb_matrix.c
     SRC += $(QUANTUM_DIR)/rgb_matrix_drivers.c
-    CIE1931_CURVE = yes
-    RGB_KEYCODES_ENABLE = yes
+    CIE1931_CURVE := yes
+    RGB_KEYCODES_ENABLE := yes
 endif
 
 ifeq ($(strip $(RGB_MATRIX_ENABLE)), yes)
-	RGB_MATRIX_ENABLE = IS31FL3731
+	RGB_MATRIX_ENABLE := IS31FL3731
 endif
 
 ifeq ($(strip $(RGB_MATRIX_ENABLE)), IS31FL3731)
@@ -178,7 +178,7 @@ endif
 
 ifeq ($(strip $(RGB_MATRIX_ENABLE)), WS2812)
     OPT_DEFS += -DWS2812
-    WS2812_DRIVER_REQUIRED = yes
+    WS2812_DRIVER_REQUIRED := yes
 endif
 
 ifeq ($(strip $(RGB_MATRIX_CUSTOM_KB)), yes)
@@ -232,12 +232,12 @@ endif
 endif
 
 ifeq ($(strip $(LCD_ENABLE)), yes)
-    CIE1931_CURVE = yes
+    CIE1931_CURVE := yes
 endif
 
 # backward compat
 ifeq ($(strip $(BACKLIGHT_CUSTOM_DRIVER)), yes)
-    BACKLIGHT_DRIVER = custom
+    BACKLIGHT_DRIVER := custom
 endif
 
 VALID_BACKLIGHT_TYPES := pwm software custom
@@ -250,7 +250,7 @@ ifeq ($(strip $(BACKLIGHT_ENABLE)), yes)
     endif
 
     ifeq ($(strip $(VISUALIZER_ENABLE)), yes)
-        CIE1931_CURVE = yes
+        CIE1931_CURVE := yes
     endif
 
     COMMON_VPATH += $(QUANTUM_DIR)/backlight
@@ -294,12 +294,12 @@ endif
 
 ifeq ($(strip $(CIE1931_CURVE)), yes)
     OPT_DEFS += -DUSE_CIE1931_CURVE
-    LED_TABLES = yes
+    LED_TABLES := yes
 endif
 
 ifeq ($(strip $(LED_BREATHING_TABLE)), yes)
     OPT_DEFS += -DUSE_LED_BREATHING_TABLE
-    LED_TABLES = yes
+    LED_TABLES := yes
 endif
 
 ifeq ($(strip $(LED_TABLES)), yes)
@@ -349,6 +349,14 @@ ifeq ($(strip $(VELOCIKEY_ENABLE)), yes)
     SRC += $(QUANTUM_DIR)/velocikey.c
 endif
 
+ifeq ($(strip $(VIA_ENABLE)), yes)
+    DYNAMIC_KEYMAP_ENABLE := yes
+    RAW_ENABLE := yes
+    BOOTMAGIC_ENABLE := lite
+    SRC += $(QUANTUM_DIR)/via.c
+    OPT_DEFS += -DVIA_ENABLE
+endif
+
 ifeq ($(strip $(DYNAMIC_KEYMAP_ENABLE)), yes)
     OPT_DEFS += -DDYNAMIC_KEYMAP_ENABLE
     SRC += $(QUANTUM_DIR)/dynamic_keymap.c

docs/config_options.md

@@ -287,8 +287,27 @@ This is a [make](https://www.gnu.org/software/make/manual/make.html) file that i
   * Defines which format (bin, hex) is copied to the root `qmk_firmware` folder after building.
 * `SRC`
   * Used to add files to the compilation/linking list.
+* `LIB_SRC`
+  * Used to add files as a library to the compilation/linking list.  
+    The files specified by `LIB_SRC` is linked after the files specified by `SRC`.  
+    For example, if you specify:
+    ```
+    SRC += a.c
+    LIB_SRC += lib_b.c
+    SRC += c.c
+    LIB_SRC += lib_d.c
+    ```
+    The link order is as follows.
+    ```
+     ...  a.o c.o  ...  lib_b.a lib_d.a  ...
+    ```
 * `LAYOUTS`
   * A list of [layouts](feature_layouts.md) this keyboard supports.
+* `LINK_TIME_OPTIMIZATION_ENABLE`
+  * Enables Link Time Optimization (`LTO`) when compiling the keyboard.  This makes the process take longer, but can significantly reduce the compiled size (and since the firmware is small, the added time is not noticeable).  However, this will automatically disable the old Macros and Functions features automatically, as these break when `LTO` is enabled.
+  It does this by automatically defining `NO_ACTION_MACRO` and `NO_ACTION_FUNCTION`
+* `LTO_ENABLE`
+  * It has the same meaning as LINK_TIME_OPTIMIZATION_ENABLE.  You can use `LTO_ENABLE` instead of `LINK_TIME_OPTIMIZATION_ENABLE`.
 
 ## AVR MCU Options
 * `MCU = atmega32u4`
@@ -347,9 +366,6 @@ Use these to enable or disable building certain features. The more you have enab
   * Forces the keyboard to wait for a USB connection to be established before it starts up
 * `NO_USB_STARTUP_CHECK`
   * Disables usb suspend check after keyboard startup. Usually the keyboard waits for the host to wake it up before any tasks are performed. This is useful for split keyboards as one half will not get a wakeup call but must send commands to the master.
-* `LINK_TIME_OPTIMIZATION_ENABLE`
-  * Enables Link Time Optimization (`LTO`) when compiling the keyboard.  This makes the process take longer, but can significantly reduce the compiled size (and since the firmware is small, the added time is not noticeable).  However, this will automatically disable the old Macros and Functions features automatically, as these break when `LTO` is enabled.  It does this by automatically defining `NO_ACTION_MACRO` and `NO_ACTION_FUNCTION`
-  * Alternatively, you can use `LTO_ENABLE` instead of `LINK_TIME_OPTIMIZATION_ENABLE`. 
 
 ## USB Endpoint Limitations
 

docs/getting_started_build_tools.md

@@ -43,7 +43,7 @@ Debian / Ubuntu example:
 Fedora / Red Hat example:
 
     sudo dnf install gcc unzip wget zip dfu-util dfu-programmer avr-gcc avr-libc binutils-avr32-linux-gnu arm-none-eabi-gcc-cs arm-none-eabi-binutils-cs arm-none-eabi-newlib
-    
+
 Arch / Manjaro example:
 
     pacman -S base-devel gcc unzip wget zip avr-gcc avr-binutils avr-libc dfu-util arm-none-eabi-gcc arm-none-eabi-binutils arm-none-eabi-newlib git dfu-programmer dfu-util
@@ -57,16 +57,17 @@ By default, this will download compilers for both AVR and ARM. If you don't need
     nix-shell --arg arm false
 
 ## macOS
-If you're using [homebrew,](http://brew.sh/) you can use the following commands:
+If you're using [Homebrew](http://brew.sh/), you can use the following commands:
 
     brew tap osx-cross/avr
-    brew tap PX4/homebrew-px4
+    brew tap osx-cross/arm
     brew update
     brew install avr-gcc@8
     brew link --force avr-gcc@8
     brew install dfu-programmer
     brew install dfu-util
-    brew install gcc-arm-none-eabi
+    brew install arm-gcc-bin@8
+    brew link --force arm-gcc-bin@8
     brew install avrdude
 
 This is the recommended method. If you don't have homebrew, [install it!](http://brew.sh/) It's very much worth it for anyone who works in the command line. Note that the `make` and `make install` portion during the homebrew installation of `avr-gcc@8` can take over 20 minutes and exhibit high CPU usage.

docs/ja/config_options.md

@@ -1,8 +1,8 @@
 # QMK の設定
 
 <!---
-  original document: eae21eed7:docs/config_options.md
-  git diff eae21eed7 HEAD docs/config_options.md | cat
+  original document: 0f43c2652:docs/config_options.md
+  git diff 0f43c2652 HEAD -- docs/config_options.md | cat
 -->
 
 QMK はほぼ無制限に設定可能です。可能なところはいかなるところでも、やりすぎな程、ユーザーがコードサイズを犠牲にしてでも彼らのキーボードをカスタマイズをすることを許しています。ただし、このレベルの柔軟性により設定が困難になります。
@@ -285,8 +285,26 @@ QMK での全ての利用可能な設定にはデフォルトがあります。
    * ビルドの後でルート `qmk_firmware` フォルダにコピーされる形式 (bin, hex) を定義します。
 * `SRC`
    * コンパイル・リンクリストにファイルを追加するために使われます。
+* `LIB_SRC`
+  * コンパイル・リンクリストにライブラリとしてファイルを追加するために使われます。  
+    `LIB_SRC` で指定されたファイルは、`SRC` で指定されたファイルの後にリンクされます。  
+    例えば、次のように指定した場合:
+    ```
+    SRC += a.c
+    LIB_SRC += lib_b.c
+    SRC += c.c
+    LIB_SRC += lib_d.c
+    ```
+    リンク順は以下の通りです。
+    ```
+     ...  a.o c.o  ...  lib_b.a lib_d.a  ...
+    ```
 * `LAYOUTS`
    * このキーボードがサポートする[レイアウト](ja/feature_layouts.md)のリスト
+* `LINK_TIME_OPTIMIZATION_ENABLE`
+   * キーボードをコンパイルする時に、Link Time Optimization (`LTO`) を有効にします。これは処理に時間が掛かりますが、コンパイルされたサイズを大幅に減らします (そして、ファームウェアが小さいため、追加の時間は分からないくらいです)。ただし、`LTO` が有効な場合、古いマクロと関数の機能が壊れるため、自動的にこれらの機能を無効にします。これは `NO_ACTION_MACRO` と `NO_ACTION_FUNCTION` を自動的に定義することで行われます。
+* `LTO_ENABLE`
+   * LINK_TIME_OPTIMIZATION_ENABLE と同じ意味です。`LINK_TIME_OPTIMIZATION_ENABLE` の代わりに `LTO_ENABLE` を使うことができます。
 
 ## AVR MCU オプション
 * `MCU = atmega32u4`
@@ -345,9 +363,6 @@ QMK での全ての利用可能な設定にはデフォルトがあります。
    * キーボードが起動する前に、USB 接続が確立されるのをキーボードに待機させます
 * `NO_USB_STARTUP_CHECK`
    * キーボードの起動後の usb サスペンドチェックを無効にします。通常、キーボードはタスクが実行される前にホストがウェイク アップするのを待ちます。分割キーボードは半分はウェイクアップコールを取得できませんが、マスタにコマンドを送信する必要があるため、役に立ちます。
-* `LINK_TIME_OPTIMIZATION_ENABLE`
-   * キーボードをコンパイルする時に、Link Time Optimization (`LTO`) を有効にします。これは処理に時間が掛かりますが、コンパイルされたサイズを大幅に減らします (そして、ファームウェアが小さいため、追加の時間は分からないくらいです)。ただし、`LTO` が有効な場合、古いマクロと関数の機能が壊れるため、自動的にこれらの機能を無効にします。これは `NO_ACTION_MACRO` と `NO_ACTION_FUNCTION` を自動的に定義することで行われます。
-   * `LINK_TIME_OPTIMIZATION_ENABLE` の代わりに `LTO_ENABLE` を使うことができます。
 
 ## USB エンドポイントの制限
 

docs/ja/driver_installation_zadig.md

@@ -0,0 +1,53 @@
+# Zadig を使ったブートローダドライバのインストール
+
+<!---
+  original document: d598f01cb:docs/driver_installation_zadig.md
+  git diff d598f01cb HEAD docs/driver_installation_zadig.md | cat
+-->
+
+QMK はホストにたいして通常の HID キーボードデバイスとして振る舞うため特別なドライバは必要ありません。しかし、Windows でのキーボードへの書き込みは、多くの場合、キーボードをリセットした時に現れるブートローダデバイスで*行います*。
+
+2つの注目すべき例外があります: 通常 Pro Micro で見られる Caterina ブートローダや、PJRC Teensy に書き込まれている HalfKay ブートローダは、それぞれシリアルポートと汎用 HID デバイスとして振る舞うため、ドライバは必要ありません。
+
+[Zadig](https://zadig.akeo.ie/) ユーティリティを使うことをお勧めします。MSYS2 あるいは WSL を使って開発環境をセットアップした場合、`qmk_install.sh` スクリプトはドライバをインストールするかどうかをたずねます。
+
+## インストール
+
+`RESET` キーコード (別のレイヤにあるかもしれません)を押すか、通常はキーボードの下面にあるリセットスイッチを押して、キーボードをブートローダモードにします。どちらもキーボードに無い場合は、Escape または Space+`B` を押しながら接続してみてください (詳細は、[ブートマジック](ja/feature_bootmagic.md) ドキュメントを見てください)。一部のキーボードはブートマジックの代わりに[コマンド](ja/feature_command.md)を使います。この場合、キーボードが接続されている状態で「左Shift + 右Shift + `B`」あるいは「左Shift + 右Shift + Escape」を押すと、ブートローダモードに入ることができます。
+一部のキーボードはブートローダに入るために特定の操作をする必要があります。例えば、[ブートマジック Lite](ja/feature_bootmagic.md#bootmagic-lite) キー (デフォルト: Escape) は別のキー(例えば、左Control)かもしれません。また、コマンドを有効にするキーの組み合わせ (デフォルト: 左Shift + 右Shift) は何か他のキー(例えば 左Control + 右Control)を押し続ける必要がある場合があります。不明な場合は、キーボードの README ファイルを参照してください。
+
+USBaspLoader を使ってデバイスをブートローダモードにするには、`BOOT` ボタンを押しながら `RESET` ボタンをタップしてください。
+あるいは `BOOT` を押し続けながら USB ケーブルを挿入します。
+
+Zadig は自動的にブートローダデバイスを検知します。**Options → List All Devices** を確認する必要がある場合があります。
+
+- Atmel AVR MCU を搭載したキーボードの場合、ブートローダは `ATm32U4DFU` に似た名前が付けられ、ベンダー ID は `03EB` です。
+- USBasp ブートローダは `USBasp` として表示され、VID/PID は`16C0:05DC` です。
+- QMK-DFU ブートローダを使って書き込まれた AVR キーボードは `<keyboard name> Bootloader` という名前が付けられ、VID は `03EB` です。
+- ほとんどの ARM キーボードでは、`STM32 BOOTLOADER` と呼ばれ、VID/PID は `0483:DF11` です。
+
+!> Zadig が `HidUsb` ドライバを使用する1つ以上のデバイスを表示する場合、キーボードはおそらくブートローダモードではありません。矢印はオレンジ色になり、システムドライバの変更を確認するように求められます。この場合、続行**しないでください**！
+
+矢印が緑色で表示されたら、ドライバを選択し、**Install Driver** をクリックします。`libusb-win32` ドライバは通常 AVR で動作し、`WinUSB`は ARM で動作しますが、それでもキーボードに書き込みできない場合は、リストから異なるドライバをインストールしてみてください。msys2 を使ってコマンドライン経由で USBaspLoader デバイスに書き込むには、`libusbk` ドライバがお勧めです。そうではなく書き込みに QMK Toolbox を使っている場合は `libusb-win32` がうまく動作します。
+
+![ブートローダドライバが正常にインストールされた Zadig](https://i.imgur.com/b8VgXzx.png)
+
+最後に、新しいドライバがロードされたことを確認するためにキーボードのプラグを抜いて再接続します。書き込みに QMK Toolbox を使う場合は、ドライバの変更を認識しない場合があるため、QMK Toolkit を終了して再起動します。
+
+## 間違ったデバイスのインストールからの回復
+
+キーボードが入力できなくなった場合は、ブートローダではなくキーボード自体のドライバを間違って入れ替えた可能性があります。これはキーボードがブートローダモードでない場合に起こりえます。これは Zadig で簡単に確認することができます - 健全なキーボードには、全てのインタフェースに `HidUsb` ドライバがインストールされています:
+
+![Zadig から見た健全なキーボード](https://i.imgur.com/Hx0E5kC.png)
+
+デバイスマネージャーを開き、キーボードと思われるデバイスを探します。
+
+![デバイスマネージャーにおける、間違ったドライバがインストールされたキーボード](https://i.imgur.com/L3wvX8f.png)
+
+右クリックし、**デバイスのアンインストール** をクリックします。最初に **このデバイスのドライバーソフトウェアを削除します** にチェックが付いていることを確認してください。
+
+!["ドライバの削除"にチェックボックスにチェックが付いた、デバイスのアンインストールダイアログ](https://i.imgur.com/aEs2RuA.png)
+
+**Action → Scan for hardware changes** をクリックします。この時点で、再び入力できるようになっているはずです。Zadig でキーボードデバイスが `HidUsb` ドライバを使っていることを再確認します。そうであれば完了です。キーボードは再び機能するはずです！
+
+?> Windows が新しいドライバを使えるようにするために、この時点でコンピュータを完全に再起動する必要があるかもしれません。

docs/ja/faq.md

@@ -0,0 +1,11 @@
+# よくある質問
+
+<!---
+  original document: d598f01cb:docs/faq.md
+  git diff d598f01cb HEAD docs/faq.md | cat
+-->
+
+* [一般](ja/faq_general.md)
+* [QMK のビルドあるいはコンパイル](ja/faq_build.md)
+* [QMK のデバッグとトラブルシューティング](ja/faq_debug.md)
+* [キーマップ](ja/faq_keymap.md)

docs/ja/faq_build.md

@@ -0,0 +1,160 @@
+# よくあるビルドの質問
+
+<!---
+  original document: 0f43c2652:docs/faq_build.md
+  git diff 0f43c2652 HEAD -- docs/faq_build.md | cat
+-->
+
+このページは QMK のビルドに関する質問を説明します。まだビルドをしていない場合は、[ビルド環境のセットアップ](ja/getting_started_build_tools.md) および [Make 手順](ja/getting_started_make_guide.md)ガイドを読むべきです。
+
+## Linux でプログラムできません
+デバイスを操作するには適切な権限が必要です。Linux ユーザの場合は、以下の `udev` ルールに関する指示を見てください。`udev` に問題がある場合は、回避策は `sudo` コマンドを使うことです。このコマンドに慣れていない場合は、`man sudo` コマンドでマニュアルを確認するか、[この web ページを見てください](https://linux.die.net/man/8/sudo)。
+
+コントローラが ATMega32u4 の場合の `sudo` の使い方の例:
+
+    $ sudo dfu-programmer atmega32u4 erase --force
+    $ sudo dfu-programmer atmega32u4 flash your.hex
+    $ sudo dfu-programmer atmega32u4 reset
+
+あるいは、単純に:
+
+    $ sudo make <keyboard>:<keymap>:dfu
+
+`make` を `sudo` で実行することは一般的には良い考えでは***なく***、可能であれば前者の方法のいずれかを使うべきです。
+
+### Linux の `udev` ルール
+Linux では、MCU にアクセスするには適切な権限が必要です。ファームウェアを書き込む時に `sudo` を使うか、`/etc/udev/rules.d/` にこれらのファイルを配置することで、アクセスすることができます。権限の追加が完了したら、以下を実行します:
+```console
+sudo udevadm control --reload-rules
+sudo udevadm trigger
+```
+
+**/etc/udev/rules.d/50-atmel-dfu.rules:**
+```
+# Atmel ATMega32U4
+SUBSYSTEMS=="usb", ATTRS{idVendor}=="03eb", ATTRS{idProduct}=="2ff4", MODE:="0666"
+# Atmel USBKEY AT90USB1287
+SUBSYSTEMS=="usb", ATTRS{idVendor}=="03eb", ATTRS{idProduct}=="2ffb", MODE:="0666"
+# Atmel ATMega32U2
+SUBSYSTEMS=="usb", ATTRS{idVendor}=="03eb", ATTRS{idProduct}=="2ff0", MODE:="0666"
+```
+
+**/etc/udev/rules.d/52-tmk-keyboard.rules:**
+```
+# tmk keyboard products     https://github.com/tmk/tmk_keyboard
+SUBSYSTEMS=="usb", ATTRS{idVendor}=="feed", MODE:="0666"
+```
+**/etc/udev/rules.d/54-input-club-keyboard.rules:**
+
+```
+# Input Club keyboard bootloader
+SUBSYSTEMS=="usb", ATTRS{idVendor}=="1c11", MODE:="0666"
+```
+
+**/etc/udev/rules.d/55-caterina.rules:**
+```
+# ModemManager should ignore the following devices
+ATTRS{idVendor}=="2a03", ENV{ID_MM_DEVICE_IGNORE}="1"
+ATTRS{idVendor}=="2341", ENV{ID_MM_DEVICE_IGNORE}="1"
+```
+
+**注意:** ModemManager フィルタリングは厳格モードでは無い場合のみ動作します。以下のコマンドでその設定を変更することができます:
+```console
+sudo sed -i 's/--filter-policy=strict/--filter-policy=default/' /lib/systemd/system/ModemManager.service
+sudo systemctl daemon-reload
+sudo systemctl restart ModemManager
+```
+
+**/etc/udev/rules.d/56-dfu-util.rules:**
+```
+# stm32duino
+SUBSYSTEMS=="usb", ATTRS{idVendor}=="1eaf", ATTRS{idProduct}=="0003", MODE:="0666"
+# Generic stm32
+SUBSYSTEMS=="usb", ATTRS{idVendor}=="0483", ATTRS{idProduct}=="df11", MODE:="0666"
+```
+
+**/etc/udev/rules.d/57-bootloadhid.rules:**
+```
+# bootloadHID
+SUBSYSTEMS=="usb", ATTRS{idVendor}=="16c0", ATTRS{idProduct}=="05df", MODE:="0666"
+```
+
+### Linux のブートローダモードで Serial デバイスが検知されない
+カーネルがデバイスを適切にサポートしていることを確認してください。デバイスが、Pro Micro (Atmega32u4) のように USB ACM を使う場合、`CONFIG_USB_ACM=y` を含めるようにしてください。他のデバイスは `USB_SERIAL` およびそのサブオプションを必要とするかもしれません。
+
+## DFU ブートローダの不明なデバイス
+
+Windows 上でキーボードを書き込む時に発生する問題は、ブートローダ用に間違ったドライバがインストールされているか、全くインストールされていないかによるものがほとんどです。
+
+QMK インストールスクリプト (MSYS2 あるいは WSL 内の `qmk_firmware` ディレクトリから `./util/qmk_install.sh`) を再実行するか、QMK Toolbox の再インストールでこの問題が解決するかもしれません。別のやり方として、手動で [`qmk_driver_installer`](https://github.com/qmk/qmk_driver_installer) パッケージをダウンロードして実行することができます。
+
+それでもうまく行かない場合は、Zadig をダウンロードして実行する必要があります。詳細な情報は [Zadig を使ったブートローダドライバのインストール](ja/driver_installation_zadig.md)を見てください。
+
+## USB VID と PID
+`config.h` を編集することで任意の ID を使うことができます。おそらく未使用の ID を使っても、他の製品と衝突するとても低い可能性があることを除いて、実際には問題はありません。
+
+QMK のほとんどのキーボードは、vendor ID として、`0xFEED` を使います。他のキーボードを調べて、ユニークな ID を選択してください。
+
+またこれも見てください。
+https://github.com/tmk/tmk_keyboard/issues/150
+
+ここで本当にユニークな VID:PID を買うことができます。個人的な使用にはこれは必要ないと思います。
+- http://www.obdev.at/products/vusb/license.html
+- http://www.mcselec.com/index.php?page=shop.product_details&flypage=shop.flypage&product_id=92&option=com_phpshop&Itemid=1
+
+## AVR のための BOOTLOADER_SIZE
+Teensy2.0++ ブートローダのサイズは 2048 バイトであることに注意してください。一部の Makefile には間違ったコメントがあります。
+
+```
+# Boot Section Size in *bytes*
+#   Teensy halfKay   512
+#   Teensy++ halfKay 2048
+#   Atmel DFU loader 4096       (TMK Alt Controller)
+#   LUFA bootloader  4096
+#   USBaspLoader     2048
+OPT_DEFS += -DBOOTLOADER_SIZE=2048
+```
+
+## MacOS での `avr-gcc: internal compiler error: Abort trap: 6 (program cc1)` 
+これは brew での更新に関する問題で、avr-gcc が依存するシンボリックリンクを壊します。
+
+解決法は全ての影響を受けたモジュールを削除し再インストールすることです。
+
+```
+brew rm avr-gcc
+brew rm avr-gcc@8
+brew rm dfu-programmer
+brew rm dfu-util
+brew rm gcc-arm-none-eabi
+brew rm arm-gcc-bin@8
+brew rm avrdude
+brew install avr-gcc@8
+brew install dfu-programmer
+brew install dfu-util
+brew install arm-gcc-bin@8
+brew install avrdude
+brew link --force avr-gcc@8
+brew link --force arm-gcc-bin@8
+```
+
+### `avr-gcc` と LUFA
+
+`avr-gcc` を更新し、LUFA に関連するエラーが表示された場合、例えば:
+
+`lib/lufa/LUFA/Drivers/USB/Class/Device/AudioClassDevice.h:380:5: error: 'const' attribute on function returning 'void'`
+
+今のところ、Homebrew で `avr-gcc` を 8 にロールバックする必要があります。
+
+```
+brew uninstall --force avr-gcc
+brew install avr-gcc@8
+brew link --force avr-gcc@8
+```
+
+### キーボードに書き込んだが何も起こらない、あるいはキーの押下が登録されない - ARM (rev6 planck、clueboard 60、hs60v2 など) でも同じ (Feb 2019)
+ARM ベースのチップ上での EEPROM の動作によって、保存された設定が無効になる場合があります。これはデフォルトレイヤに影響し、まだ調査中の特定の環境下でキーボードが使えなくなる*しれません*。EEPROM のリセットでこれが修正されます。
+
+[Planck rev6 reset EEPROM](https://cdn.discordapp.com/attachments/473506116718952450/539284620861243409/planck_rev6_default.bin) を使って eeprom のリセットを強制することができます。このイメージを書き込んだ後で、通常のファームウェアを書き込むと、キーボードが_通常_ の動作順序に復元されます。
+[Preonic rev3 reset EEPROM](https://cdn.discordapp.com/attachments/473506116718952450/537849497313738762/preonic_rev3_default.bin)
+
+いずれかの形式でブートマジックが有効になっている場合は、これも実行できるはずです (実行方法の詳細については、[ブートマジックドキュメント](feature_bootmagic.md)とキーボード情報を見てください)。

docs/ja/faq_debug.md

@@ -0,0 +1,161 @@
+# デバッグの FAQ
+
+<!---
+  original document: 376419a4f:docs/faq_debug.md
+  git diff 376419a4f HEAD docs/faq_debug.md | cat
+-->
+
+このページは、キーボードのトラブルシューティングについての様々な一般的な質問を説明します。
+
+# デバッグコンソール
+
+## `hid_listen` がデバイスを認識できない
+デバイスのデバッグコンソールの準備ができていない場合、以下のように表示されます:
+
+```
+Waiting for device:.........
+```
+
+デバイスが接続されると、*hid_listen* がデバイスを見つけ、以下のメッセージが表示されます:
+
+```
+Waiting for new device:.........................
+Listening:
+```
+
+この 'Listening:' のメッセージが表示されない場合は、[Makefile] を `CONSOLE_ENABLE=yes` に設定してビルドしてみてください
+
+Linux のような OS でデバイスにアクセスするには、権限が必要かもしれません。
+- `sudo hid_listen` を試してください
+
+## コンソールにメッセージが表示されない
+以下を調べてください:
+- *hid_listen* がデバイスを検出する。上記を見てください。
+- **Magic**+d を使ってデバッグを有効にする。[マジックコマンド](https://github.com/tmk/tmk_keyboard#magic-commands)を見てください。
+- `debug_enable=true` を設定します。[テストとデバッグ](ja/newbs_testing_debugging.md#debugging)を見てください
+- デバッグ print の代わりに 'print' 関数を使ってみてください。**common/print.h** を見てください。
+- コンソール機能を持つ他のデバイスを切断します。[Issue #97](https://github.com/tmk/tmk_keyboard/issues/97) を見てください。
+
+## Linux あるいは UNIX のようなシステムはスーパーユーザ権限を必要とします
+権限付きで *hid_listen* を実行するために 'sudo' を使ってください。
+```
+$ sudo hid_listen
+```
+
+または rules ディレクトリにファイルを置いて、TMK デバイスのための *udev rule* を追加します。ディレクトリは各システムで異なるかもしれません。
+
+File: /etc/udev/rules.d/52-tmk-keyboard.rules (Ubuntu の場合)
+```
+# tmk keyboard products     https://github.com/tmk/tmk_keyboard
+SUBSYSTEMS=="usb", ATTRS{idVendor}=="feed", MODE:="0666"
+```
+
+***
+
+# 雑多なこと
+## 安全性の考慮
+
+あなたはおそらくキーボードを「文鎮化」したくないでしょう。文鎮化するとファームウェアを書き換えられないようになります。リスクがあまりに高い(そしてそうでないかもしれない)ものの一部のリストを示します。
+
+- キーボードマップに RESET が含まれない場合、DFU モードに入るには、PCB のリセットボタンを押す必要があります。底部のネジを外す必要があります。
+- tmk_core / common にあるファイルを触るとキーボードが操作不能になるかもしれません。
+- .hex ファイルが大きすぎると問題を引き起こします; `make dfu` コマンドはブロックを削除し、
+サイズを検査し(おっと、間違った順序です！)、エラーを出力し、
+キーボードへの書き込みに失敗し、DFU モードのままになります。
+   - この目的のためには、Planck の最大の .hex ファイルサイズは 7000h (10進数で28672)であることに注意してください。
+
+```
+Linking: .build/planck_rev4_cbbrowne.elf                                                            [OK]
+Creating load file for Flash: .build/planck_rev4_cbbrowne.hex                                       [OK]
+
+Size after:
+   text    data     bss     dec     hex filename
+      0   22396       0   22396    577c planck_rev4_cbbrowne.hex
+```
+
+- 上のファイルのサイズは 22396/577ch で、28672/7000h より小さいです
+- 適切な替わりの .hex ファイルがある限り、それをロードして再試行することができます
+- あなたがキーボードの Makefile で指定したかもしれない一部のオプションは、余分なメモリを消費します; BOOTMAGIC_ENABLE、MOUSEKEY_ENABLE、EXTRAKEY_ENABLE、CONSOLE_ENABLE、API_SYSEX_ENABLE に注意してください
+- DFU ツールは(オプションの余計なフルーツサラダを投げ込まない限り)ブートローダに書き込むことを許可しないので、
+ここにはリスクはほとんどありません。
+- EEPROM の書き込みサイクルは、約100000です。ファームウェアを繰り返し継続的に書き換えるべきではありません。それは最終的に EEPROM を焼き焦がします。
+
+## NKRO が動作しません
+最初に、**Makefile** 内でビルドオプション `NKRO_ENABLE` を使ってファームウェアをコンパイルする必要があります。
+
+**NKRO** がまだ動作しない場合は、`Magic` **N** コマンド(デフォルトでは `LShift+RShift+N`)を試してみてください。**NKRO** モードと **6KRO** モード間を一時的に切り替えるためにこのコマンドを使うことができます。**NKRO** が機能しない状況、特に BIOS の場合は **6KRO** モードに切り替える必要があります。
+
+ファームウェアを `BOOTMAGIC_ENABLE` でビルドした場合、`ブートマジック` **N** コマンドで切り替える必要があります (デフォルトでは `Space+N`)。この設定は EEPROM に格納され、電源を入れ直しても保持されます。
+
+https://github.com/tmk/tmk_keyboard#boot-magic-configuration---virtual-dip-switch
+
+
+## TrackPoint はリセット回路が必要です (PS/2 マウスサポート)
+リセット回路が無いとハードウェアの不適切な初期化のために一貫性の無い結果になります。TPM754 の回路図を見てください。
+
+- http://geekhack.org/index.php?topic=50176.msg1127447#msg1127447
+- http://www.mikrocontroller.net/attachment/52583/tpm754.pdf
+
+
+## 16 を超えるマトリックの列を読み込めない
+列が 16 を超える場合、[matrix.h] の `read_cols()` 内の `1<<16` の代わりに `1UL<<16` を使ってください。
+
+C では、AVR の場合 `1` は [16 bit] である [int] 型の1を意味し、15 を超えて左にシフトすることはできません。`1<<16` すると予期しないゼロが発生します。`1UL` として [unsigned long] 型を使う必要があります。
+
+http://deskthority.net/workshop-f7/rebuilding-and-redesigning-a-classic-thinkpad-keyboard-t6181-60.html#p146279
+
+## 特別なエクストラキーが動作しない (システム、オーディオコントロールキー)
+QMK でそれらを使うには、`rules.mk` 内で `EXTRAKEY_ENABLE` を定義する必要があります。
+
+```
+EXTRAKEY_ENABLE = yes          # オーディオ制御とシステム制御
+```
+
+## スリープから復帰しない
+
+Windows では、**デバイスマネージャ**の**電源の管理**タブ内の `このデバイスで、コンピュータのスタンバイ状態を解除できるようにする` 設定を調べてください。また BIOS 設定も調べてください。
+
+スリープ中に任意のキーを押すとホストが起動するはずです。
+
+## Arduino を使っていますか？
+
+**Arduino のピンの命名は実際のチップと異なることに注意してください。** 例えば、Arduino のピン `D0` は `PD0` ではありません。回路図を自身で確認してください。
+
+- http://arduino.cc/en/uploads/Main/arduino-leonardo-schematic_3b.pdf
+- http://arduino.cc/en/uploads/Main/arduino-micro-schematic.pdf
+
+Arduino の Leonardo と micro には **ATMega32U4** が載っていて、TMK 用に使うことができますが、Arduino のブートローダが問題になることがあります。
+
+## JTAG を有効にする
+
+デフォルトでは、キーボードが起動するとすぐに JTAG デバッグインタフェースが無効になります。JTAG 対応 MCU は `JTAGEN` ヒューズが設定された状態で出荷されており、キーボードがスイッチマトリックス、LED などに使用している可能性のある MCU の特定のピンを乗っ取ります。
+
+JTAG を有効にしたままにしたい場合は、単に以下のものを `config.h` に追加します:
+
+```c
+#define NO_JTAG_DISABLE
+```
+
+## USB 3 の互換性
+USB 3 ポートで問題がある人がいると聞きました。USB 2 ポートを試してください。
+
+
+## Mac の互換性
+### OS X 10.11 と Hub
+https://geekhack.org/index.php?topic=14290.msg1884034#msg1884034
+
+
+## リジューム (スリープとウェークアップ)/電源サイクルの問題
+一部の人がキーボードが BIOS で動作しなくなった、またはリジューム(電源サイクル)の後で動作しなくなったと報告しました。
+
+今のところ、この問題の根本は明確ではないですが、幾つかのビルドオプションが関係しているようです。Makefileで、`CONSOLE_ENABLE`、`NKRO_ENABLE`、`SLEEP_LED_ENABLE` あるいは他のオプションを無効にしてみてください。
+
+https://github.com/tmk/tmk_keyboard/issues/266
+https://geekhack.org/index.php?topic=41989.msg1967778#msg1967778
+
+
+
+## FLIP が動作しない
+### `AtLibUsbDfu.dll` が見つかりません
+デバイスマネージャから現在のドライバを削除し、FLIP が提供するものを再インストールします。
+http://imgur.com/a/bnwzy

docs/ja/faq_general.md

@@ -0,0 +1,20 @@
+# よくある質問
+
+<!---
+  original document: d598f01cb:docs/faq_general.md
+  git diff d598f01cb HEAD docs/faq_general.md | cat
+-->
+
+## QMK とは何か？
+
+Quantum Mechanical Keyboard の略である [QMK](https://github.com/qmk) は、カスタムキーボードのためのツールをビルドしている人々のグループです。[TMK](https://github.com/tmk/tmk_keyboard) の大幅に修正されたフォークである [QMK ファームウェア](https://github.com/qmk/qmk_firmware)から始まりました。
+
+## QMK と TMK の違いは何か？
+
+TMK は [Jun Wako](https://github.com/tmk) によって設計され実装されました。QMK は [Jack Humbert](https://github.com/jackhumbert) の Planck 用 TMK のフォークとして始まりました。しばらくして、Jack のフォークは TMK からかなり分岐し、2015年に Jack はフォークを QMK に名前を変えることにしました。
+
+技術的な観点から、QMK は幾つかの新しい機能を追加した TMK に基づいています。最も注目すべきことは、QMK は利用可能なキーコードの数を増やし、`S()`、`LCTL()` および `MO()` などの高度な機能を実装するためにこれらを使っています。[キーコード](keycodes.md)でこれらのキーコードの完全なリストを見ることができます。
+
+プロジェクトとコミュニティの管理の観点から、TMK は公式にサポートされている全てのキーボードを自分で管理しており、コミュニティのサポートも少し受けています。他のキーボード用に別個のコミュニティが維持するフォークが存在するか、作成できます。デフォルトでは少数のキーマップのみが提供されるため、ユーザは一般的にお互いにキーマップを共有しません。QMK は集中管理されたリポジトリを介して、キーボードとキーマップの両方を共有することを奨励しており、品質基準に準拠する全てのプルリクエストを受け付けます。これらはほとんどコミュニティで管理されますが、必要な場合は QMK チームも支援します。
+
+どちらのアプローチもメリットとデメリットがあり、理に適う場合は TMK と QMK の間でコードは自由にやり取りされます。

docs/ja/faq_keymap.md

@@ -0,0 +1,149 @@
+# キーマップの FAQ
+
+<!---
+  original document: 376419a4f:docs/faq_keymap.md
+  git diff 376419a4f HEAD docs/faq_keymap.md | cat
+-->
+
+このページは人々がキーマップについてしばしば持つ疑問について説明します。まだ読んだことが無い場合には、[キーマップの概要](ja/keymap.md)を最初に読むべきです。
+
+## どのキーコードを使えますか？
+あなたが利用可能なキーコードのインデックスについては、[キーコード](ja/keycodes.md)を見てください。より広範なドキュメントがある場合は、そこからリンクしてあります。
+
+キーコードは実際には [common/keycode.h](https://github.com/qmk/qmk_firmware/blob/master/tmk_core/common/keycode.h) で定義されています。
+
+## デフォルトのキーコードとは何か？
+
+世界中で使用されている ANSI、ISO および JIS の3つの標準キーボードがあります。北米では主に ANSI が使われ、ヨーロッパおよびアフリカでは主に ISO が使われ、日本では JIS が使われます。言及されていない地域では、ANSI あるいは ISO が使われています。これらのレイアウトに対応するキーコードは以下の通りです:
+
+<!-- Source for this image: http://www.keyboard-layout-editor.com/#/gists/bf431647d1001cff5eff20ae55621e9a -->
+![キーボードのレイアウトイメージ](https://i.imgur.com/5wsh5wM.png)
+
+## 一部のキーが入れ替わっているか、または動作しない
+
+QMK には2つの機能、ブートマジックとコマンドがあり、これによりその場でキーボードの動作を変更することができます。これには Ctrl/Caps の交換、Gui の無効化、Alt/GUI の交換、Backspace/Backslash の交換、全てのキーの無効化およびその他の動作の変更が含まれますが、これらに限定されません。
+
+迅速な解決策として、キーボードを接続している時に `Space`+`Backspace` を押してみてください。これはキーボードに保存されている設定をリセットし、これらのキーを通常の操作に戻します。うまく行かない場合は、以下を見てください:
+
+* [ブートマジック](ja/feature_bootmagic.md)
+* [コマンド](ja/feature_command.md)
+
+## メニューキーが動作しない
+
+ほとんどの最近のキーボードにある、`KC_RGUI` と `KC_RCTL` の間にあるキーは、実際には `KC_APP` と呼ばれます。これは、そのキーが発明された時に、関連する標準にすでに `MENU` という名前のキーが存在していたため、MS はそれを `APP` キーと呼ぶことを選択したためです。
+
+## `KC_SYSREQ` が動作しません
+`KC_SYSREQ` の代わりに、Print Screen(`KC_PSCREEN` あるいは `KC_PSCR`) のキーコードを使ってください。'Alt + Print Screen' のキーの組み合わせは、'システムリクエスト' と認識されます。
+
+[issue #168](https://github.com/tmk/tmk_keyboard/issues/168) と以下を見てください
+* http://en.wikipedia.org/wiki/Magic_SysRq_key
+* http://en.wikipedia.org/wiki/System_request
+
+## 電源キーが動作しません
+
+やや紛らわしいことに、QMK には2つの "Power" キーコードがあります: キーボード/キーパッド HID usage page では `KC_POWER`、Consumer page では `KC_SYSTEM_POWER` (あるいは `KC_PWR`)。
+
+前者は macOS でのみ認識されますが、後者 `KC_SLEP` および `KC_WAKE` は3つの主要なオペレーティングシステム全てでサポートされるため、これらを使うことをお勧めします。Windows ではこれらのキーはすぐに機能しますが、macOS ではそれらはダイアログが表示されるまで押し続ける必要があります。
+
+## ワンショットモディファイア
+私の個人的な 'the' の問題を解決します。'The' ではなく 'the' あるいは 'THe' を間違って入力することがありました。ワンショットシフトはこれを軽減します。
+https://github.com/tmk/tmk_keyboard/issues/67
+
+## モディファイヤ/レイヤスタック
+修飾キーあるいはレイヤは、レイヤの切り替えが適切に設定されていない場合、スタックするかもしれません。
+修飾キーおよびレイヤ切り替えの場合、リリースイベント時に修飾キーの登録を解除する、もしくは前のレイヤに戻るために、目的のレイヤの同じ位置に `KC_TRANS` を配置する必要があります。
+
+* https://github.com/tmk/tmk_core/blob/master/doc/keymap.md#31-momentary-switching
+* http://geekhack.org/index.php?topic=57008.msg1492604#msg1492604
+* https://github.com/tmk/tmk_keyboard/issues/248
+
+
+## メカニカルロックスイッチのサポート
+
+この機能は [Alps](http://deskthority.net/wiki/Alps_SKCL_Lock) のような*メカニカルロックスイッチ*用です。以下を `config.h` に追加することで有効にすることができます:
+
+```
+#define LOCKING_SUPPORT_ENABLE
+#define LOCKING_RESYNC_ENABLE
+```
+
+この機能を有効にした後で、キーマップでキーコード `KC_LCAP`、`KC_LNUM` および `KC_LSCR` を使います。
+
+古いビンテージメカニカルキーボードにはロックスイッチが付いている場合がありますが、最新のものにはありません。***ほとんどの場合この機能は必要なく、単にキーコード `KC_CAPS`、`KC_NLCK` および `KC_SLCK`*** を使います。
+
+## セディーユ 'Ç' のような ASCII 以外の特別文字の入力
+
+[ユニコード](ja/feature_unicode.md) 機能を見てください。
+
+## macOS での `Fn` キー
+
+ほとんどの Fn キーと異なり、Apple のキーボードの Fn キーには実際には独自のキーコードのようなものがあります。基本的な 6KRO HID レポートの6番目のキーコードの代わりになります -- つまり、Apple キーボードは実際には 5KRO のみです。
+
+QMK にこのキーを送信させることは技術的に可能です。ただし、そうするには Fn キーの状態を追加するためにレポート形式の修正を必要とします。 
+さらに悪いことに、キーボードの VID と PID が実際の Apple のキーボードのものと一致しない限り、認識されません。公式の QMK がこの機能をサポートすることで法的な問題が起きるため、サポートされることはないでしょう。
+
+詳細については、[この issue](https://github.com/qmk/qmk_firmware/issues/2179) を見てください。
+
+## Mac OSX でサポートされるキーは？
+このソースコードから、どのキーコードが OSX でサポートされるかを知ることができます。
+
+`usb_2_adb_keymap` 配列は、キーボード/キーパッドページの Page usages を ADB スキャンコード(OSX 内部キーコード)にマップします。
+
+https://opensource.apple.com/source/IOHIDFamily/IOHIDFamily-606.1.7/IOHIDFamily/Cosmo_USB2ADB.c
+
+`IOHIDConsumer::dispatchConsumerEvent` は Consumer page usages を処理します。
+
+https://opensource.apple.com/source/IOHIDFamily/IOHIDFamily-606.1.7/IOHIDFamily/IOHIDConsumer.cpp
+
+
+## Mac OSX での JIS キー
+`無変換(Muhenkan)`, `変換(Henkan)`, `ひらがな(hiragana)` のような日本語 JIS キーボード固有のキーは OSX では認識されません。**Seil** を使ってこれらのキーを使うことができます。以下のオプションを試してください。
+
+* PC キーボードで NFER キーを有効にする
+* PC キーボードで XFER キーを有効にする
+* PC キーボードで KATAKANA キーを有効にする
+
+https://pqrs.org/osx/karabiner/seil.html
+
+
+## RN-42 Bluetooth が Karabiner で動作しない
+Karabiner - Mac OSX 上のキーマッピングツール - は、デフォルトでは RN-42 モジュールからの入力を無視します。Karabiner をキーボードで動作させるにはこのオプションを有効にする必要があります。
+https://github.com/tekezo/Karabiner/issues/403#issuecomment-102559237
+
+この問題の詳細についてはこれらを見てください。
+https://github.com/tmk/tmk_keyboard/issues/213
+https://github.com/tekezo/Karabiner/issues/403
+
+
+## 単一のキーでの Esc と<code>&#96;</code>
+
+[Grave Escape](feature_grave_esc.md) 機能を見てください。
+
+## Mac OSX での Eject
+`KC_EJCT` キーコードは OSX で動作します。https://github.com/tmk/tmk_keyboard/issues/250
+Windows 10 はコードを無視し、Linux/Xorg は認識しますが、デフォルトではマッピングがありません。
+
+実際の Apple キーボードにある Eject キーコードは実際には分かりません。HHKB は Mac モードでは Eject キー (`Fn+f`) に `F20` を使いますが、これはおそらく Apple の Eject キーコードと同じではありません。
+
+
+## `action_util.c` の `weak_mods` と `real_mods` は何か
+___改善されるべきです___
+
+real_mods は実際の物理的な修飾キーの状態を保持することを目的にしていますが、weak_mods は実際の修飾キーの状態に影響しない仮想あるいは一時的なモディファイアの状態を保持します。
+
+物理的な左シフトキーを押しながら ACTION_MODS_KEY(LSHIFT, KC_A) を入力するとします
+
+weak_mods では、
+* (1) 左シフトキーを押し続ける: real_mods |= MOD_BIT(LSHIFT)
+* (2) ACTION_MODS_KEY(LSHIFT, KC_A) を押す: weak_mods |= MOD_BIT(LSHIFT)
+* (3) ACTION_MODS_KEY(LSHIFT, KC_A) を放す: weak_mods &= ~MOD_BIT(LSHIFT)
+real_mods はモディファイアの状態を維持します。
+
+weak mods 無しでは、
+* (1) 左シフトキーを押し続ける: real_mods |= MOD_BIT(LSHIFT)
+* (2) ACTION_MODS_KEY(LSHIFT, KC_A) を押す: real_mods |= MOD_BIT(LSHIFT)
+* (3) ACTION_MODS_KEY(LSHIFT, KC_A) を放す: real_mods &= ~MOD_BIT(LSHIFT)
+ここで、real_mods は 'physical left shift' '物理的な左シフト' の状態を見失います。
+
+キーボードレポートが送信される時、weak_mods は real_mods と論理和がとられます。
+https://github.com/tmk/tmk_core/blob/master/common/action_util.c#L57

docs/ja/newbs_building_firmware.md

@@ -2,8 +2,8 @@
 
 <!---
   grep --no-filename "^[ ]*git diff" docs/ja/*.md | sh
-  original document: ed0575fc8:docs/newbs_building_firmware.md
-  git diff ed0575fc8 HEAD docs/newbs_building_firmware.md | cat
+  original document: 0f43c2652:docs/newbs_building_firmware.md
+  git diff 0f43c2652 HEAD -- docs/newbs_building_firmware.md | cat
 -->
 
 ビルド環境をセットアップしたので、カスタムファームウェアのビルドを開始する準備ができました。
@@ -56,7 +56,7 @@ macOS または Windows を使用している場合は、キーマップフォ
 
 この行はレイヤーのリストの開始を表わしています。
 その下には、`LAYOUT` または `KEYMAP` のいずれかを含む行があり、これらの行はレイヤーの開始を表わしています。
-その行の下には、その特定のレイヤーを構成するキーのリストがあります。
+その行の下には、そのレイヤーを構成するキーのリストがあります。
 
 !> キーマップファイルを編集するときは、カンマを追加したり削除したりしないように注意してください。そうするとファームウェアのコンパイルができなくなり、余分であったり欠落していたりするカンマがどこにあるのかを容易に把握できない場合があります。
 

docs/newbs_building_firmware.md

@@ -42,7 +42,7 @@ Open up your `keymap.c`. Inside this file you'll find the structure that control
 
     const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 
-This line indicates the start of the list of Layers. Below that you'll find lines containing either `LAYOUT` or `KEYMAP`, and these lines indicate the start of a layer. Below that line is the list of keys that comprise a that particular layer.
+This line indicates the start of the list of Layers. Below that you'll find lines containing either `LAYOUT` or `KEYMAP`, and these lines indicate the start of a layer. Below that line is the list of keys that comprise a particular layer.
 
 !> When editing your keymap file be careful not to add or remove any commas. If you do you will prevent your firmware from compiling and it may not be easy to figure out where the extra, or missing, comma is.
 

keyboards/aeboards/aegis/config.h

@@ -46,23 +46,3 @@
 
 /* Locking resynchronize hack */
 #define LOCKING_RESYNC_ENABLE
-
-#define DYNAMIC_KEYMAP_LAYER_COUNT 4
-
-// EEPROM usage
-
-// TODO: refactor with new user EEPROM code (coming soon)
-#define EEPROM_MAGIC 0x451F
-#define EEPROM_MAGIC_ADDR 34
-// Bump this every time we change what we store
-// This will automatically reset the EEPROM with defaults
-// and avoid loading invalid data from the EEPROM
-#define EEPROM_VERSION 0x08
-#define EEPROM_VERSION_ADDR 36
-
-// Dynamic keymap starts after EEPROM version
-#define DYNAMIC_KEYMAP_EEPROM_ADDR 37
-// Dynamic macro starts after dynamic keymaps (37+(4*12*9*2)) = (37+864)
-#define DYNAMIC_KEYMAP_MACRO_EEPROM_ADDR 901
-#define DYNAMIC_KEYMAP_MACRO_EEPROM_SIZE 123
-#define DYNAMIC_KEYMAP_MACRO_COUNT 16

keyboards/aeboards/aegis/keymaps/via/rules.mk

@@ -1,68 +1 @@
-# project specific files
-SRC =	keyboards/wilba_tech/wt_main.c
-
-# MCU name
-MCU = atmega32u4
-
-# Processor frequency.
-#     This will define a symbol, F_CPU, in all source code files equal to the
-#     processor frequency in Hz. You can then use this symbol in your source code to
-#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
-#     automatically to create a 32-bit value in your source code.
-#
-#     This will be an integer division of F_USB below, as it is sourced by
-#     F_USB after it has run through any CPU prescalers. Note that this value
-#     does not *change* the processor frequency - it should merely be updated to
-#     reflect the processor speed set externally so that the code can use accurate
-#     software delays.
-F_CPU = 16000000
-
-
-#
-# LUFA specific
-#
-# Target architecture (see library "Board Types" documentation).
-ARCH = AVR8
-
-# Input clock frequency.
-#     This will define a symbol, F_USB, in all source code files equal to the
-#     input clock frequency (before any prescaling is performed) in Hz. This value may
-#     differ from F_CPU if prescaling is used on the latter, and is required as the
-#     raw input clock is fed directly to the PLL sections of the AVR for high speed
-#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
-#     at the end, this will be done automatically to create a 32-bit value in your
-#     source code.
-#
-#     If no clock division is performed on the input clock inside the AVR (via the
-#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
-F_USB = $(F_CPU)
-
-# Interrupt driven control endpoint task(+60)
-OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
-
-
-# Boot Section
-BOOTLOADER = atmel-dfu
-
-
-# Build Options
-#   change yes to no to disable
-#
-BOOTMAGIC_ENABLE = no      # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE = no       # Mouse keys(+4700)
-EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
-CONSOLE_ENABLE = no        # Console for debug(+400)
-COMMAND_ENABLE = no        # Commands for debug and configuration
-# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
-SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
-# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-NKRO_ENABLE = yes            # USB Nkey Rollover
-BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality on B7 by default
-MIDI_ENABLE = no            # MIDI support (+2400 to 4200, depending on config)
-UNICODE_ENABLE = no         # Unicode
-BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
-AUDIO_ENABLE = no           # Audio output on port C6
-FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
-
-RAW_ENABLE = yes
-DYNAMIC_KEYMAP_ENABLE = yes
+VIA_ENABLE = yes

keyboards/aeboards/aegis/rules.mk

@@ -14,7 +14,7 @@ BOOTLOADER = atmel-dfu
 # Build Options
 #   change yes to no to disable
 #
-BOOTMAGIC_ENABLE = no      # Virtual DIP switch configuration(+1000)
+BOOTMAGIC_ENABLE = lite    # Virtual DIP switch configuration(+1000)
 MOUSEKEY_ENABLE = no       # Mouse keys(+4700)
 EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
 CONSOLE_ENABLE = no        # Console for debug(+400)
@@ -30,5 +30,3 @@ BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
 AUDIO_ENABLE = no           # Audio output on port C6
 FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
 
-# project specific files
-SRC = keyboards/wilba_tech/wt_main.c

keyboards/aeboards/ext65/config.h

@@ -46,24 +46,3 @@
 
 /* Locking resynchronize hack */
 #define LOCKING_RESYNC_ENABLE
-
-#define DYNAMIC_KEYMAP_LAYER_COUNT 4
-
-// EEPROM usage
-
-// TODO: refactor with new user EEPROM code (coming soon)
-#define EEPROM_MAGIC 0x451F
-#define EEPROM_MAGIC_ADDR 34
-// Bump this every time we change what we store
-// This will automatically reset the EEPROM with defaults
-// and avoid loading invalid data from the EEPROM
-#define EEPROM_VERSION 0x08
-#define EEPROM_VERSION_ADDR 36
-
-// Dynamic keymap starts after EEPROM version
-#define DYNAMIC_KEYMAP_EEPROM_ADDR 37
-// Dynamic macro starts after dynamic keymaps (37+(4*10*10*2)) = (37+800)
-#define DYNAMIC_KEYMAP_MACRO_EEPROM_ADDR 837
-#define DYNAMIC_KEYMAP_MACRO_EEPROM_SIZE 187
-#define DYNAMIC_KEYMAP_MACRO_COUNT 16
-

keyboards/aeboards/ext65/keymaps/default/keymap.c

@@ -38,9 +38,9 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
   ),
 
   [1] = LAYOUT_ext65(
-    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RESET  ,
+    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
     KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,          KC_TRNS,
-    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PGDN, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,                   KC_TRNS,
+    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,                   KC_TRNS,
     KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,                   KC_TRNS, KC_TRNS,
     KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,                            KC_TRNS,                   KC_TRNS, KC_TRNS,                   KC_TRNS, KC_TRNS, KC_TRNS
   ),
@@ -48,7 +48,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
   [2] = LAYOUT_ext65(
     KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
     KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,          KC_TRNS,
-    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PGDN, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,                   KC_TRNS,
+    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,                   KC_TRNS,
     KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,                   KC_TRNS, KC_TRNS,
     KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,                            KC_TRNS,                   KC_TRNS, KC_TRNS,                   KC_TRNS, KC_TRNS, KC_TRNS
   ),
@@ -56,7 +56,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
   [3] = LAYOUT_ext65(
     KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
     KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,          KC_TRNS,
-    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PGDN, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,                   KC_TRNS,
+    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,                   KC_TRNS,
     KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,                   KC_TRNS, KC_TRNS,
     KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,                            KC_TRNS,                   KC_TRNS, KC_TRNS,                   KC_TRNS, KC_TRNS, KC_TRNS
   )

keyboards/aeboards/ext65/keymaps/via/keymap.c

@@ -38,9 +38,9 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
   ),
 
   [1] = LAYOUT_ext65(
-    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RESET  ,
+    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
     KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,          KC_TRNS,
-    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PGDN, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,                   KC_TRNS,
+    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,                   KC_TRNS,
     KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,                   KC_TRNS, KC_TRNS,
     KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,                            KC_TRNS,                   KC_TRNS, KC_TRNS,                   KC_TRNS, KC_TRNS, KC_TRNS
   ),
@@ -48,7 +48,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
   [2] = LAYOUT_ext65(
     KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
     KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,          KC_TRNS,
-    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PGDN, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,                   KC_TRNS,
+    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,                   KC_TRNS,
     KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,                   KC_TRNS, KC_TRNS,
     KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,                            KC_TRNS,                   KC_TRNS, KC_TRNS,                   KC_TRNS, KC_TRNS, KC_TRNS
   ),
@@ -56,7 +56,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
   [3] = LAYOUT_ext65(
     KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
     KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,          KC_TRNS,
-    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PGDN, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,                   KC_TRNS,
+    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,                   KC_TRNS,
     KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,                   KC_TRNS, KC_TRNS,
     KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,                            KC_TRNS,                   KC_TRNS, KC_TRNS,                   KC_TRNS, KC_TRNS, KC_TRNS
   )

keyboards/aeboards/ext65/keymaps/via/rules.mk

@@ -1,68 +1 @@
-# project specific files
-SRC =	keyboards/wilba_tech/wt_main.c
-
-# MCU name
-MCU = atmega32u4
-
-# Processor frequency.
-#     This will define a symbol, F_CPU, in all source code files equal to the
-#     processor frequency in Hz. You can then use this symbol in your source code to
-#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
-#     automatically to create a 32-bit value in your source code.
-#
-#     This will be an integer division of F_USB below, as it is sourced by
-#     F_USB after it has run through any CPU prescalers. Note that this value
-#     does not *change* the processor frequency - it should merely be updated to
-#     reflect the processor speed set externally so that the code can use accurate
-#     software delays.
-F_CPU = 16000000
-
-
-#
-# LUFA specific
-#
-# Target architecture (see library "Board Types" documentation).
-ARCH = AVR8
-
-# Input clock frequency.
-#     This will define a symbol, F_USB, in all source code files equal to the
-#     input clock frequency (before any prescaling is performed) in Hz. This value may
-#     differ from F_CPU if prescaling is used on the latter, and is required as the
-#     raw input clock is fed directly to the PLL sections of the AVR for high speed
-#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
-#     at the end, this will be done automatically to create a 32-bit value in your
-#     source code.
-#
-#     If no clock division is performed on the input clock inside the AVR (via the
-#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
-F_USB = $(F_CPU)
-
-# Interrupt driven control endpoint task(+60)
-OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
-
-
-# Boot Section
-BOOTLOADER = atmel-dfu
-
-
-# Build Options
-#   change yes to no to disable
-#
-BOOTMAGIC_ENABLE = no      # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE = no       # Mouse keys(+4700)
-EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
-CONSOLE_ENABLE = no        # Console for debug(+400)
-COMMAND_ENABLE = no        # Commands for debug and configuration
-# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
-SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
-# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-NKRO_ENABLE = yes            # USB Nkey Rollover
-BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality on B7 by default
-MIDI_ENABLE = no            # MIDI support (+2400 to 4200, depending on config)
-UNICODE_ENABLE = no         # Unicode
-BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
-AUDIO_ENABLE = no           # Audio output on port C6
-FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
-
-RAW_ENABLE = yes
-DYNAMIC_KEYMAP_ENABLE = yes
+VIA_ENABLE = yes

keyboards/aeboards/ext65/rules.mk

@@ -14,7 +14,7 @@ BOOTLOADER = atmel-dfu
 # Build Options
 #   change yes to no to disable
 #
-BOOTMAGIC_ENABLE = no      # Virtual DIP switch configuration(+1000)
+BOOTMAGIC_ENABLE = lite      # Virtual DIP switch configuration(+1000)
 MOUSEKEY_ENABLE = no       # Mouse keys(+4700)
 EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
 CONSOLE_ENABLE = no        # Console for debug(+400)
@@ -29,6 +29,3 @@ UNICODE_ENABLE = no         # Unicode
 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
 AUDIO_ENABLE = no           # Audio output on port C6
 FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
-
-# project specific files
-SRC += keyboards/wilba_tech/wt_main.c

keyboards/ai03/lunar/config.h

@@ -242,25 +242,3 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 /* Bootmagic Lite key configuration */
 // #define BOOTMAGIC_LITE_ROW 0
 // #define BOOTMAGIC_LITE_COLUMN 0
-
-/* VIA Configurator Compatibility */
-
-#define DYNAMIC_KEYMAP_LAYER_COUNT 4
-
-// EEPROM usage
-
-#define EEPROM_MAGIC 0x451F
-#define EEPROM_MAGIC_ADDR 34
-// Bump this every time we change what we store
-// This will automatically reset the EEPROM with defaults
-// and avoid loading invalid data from the EEPROM
-#define EEPROM_VERSION 0x08
-#define EEPROM_VERSION_ADDR 36
-
-// Dynamic keymap starts after EEPROM version
-#define DYNAMIC_KEYMAP_EEPROM_ADDR 37
-// DYNAMIC_KEYMAP_MACRO_EEPROM_ADDR = DYNAMIC_KEYMAP_EEPROM_ADDR + (DYNAMIC_KEYMAP_LAYER_COUNT * MATRIX_ROWS * MATRIX_COLS * 2)
-#define DYNAMIC_KEYMAP_MACRO_EEPROM_ADDR 637
-// DYNAMIC_KEYMAP_MACRO_EEPROM_SIZE = 1024 - DYNAMIC_KEYMAP_MACRO_EEPROM_ADDR
-#define DYNAMIC_KEYMAP_MACRO_EEPROM_SIZE 387
-#define DYNAMIC_KEYMAP_MACRO_COUNT 16

keyboards/ai03/lunar/keymaps/via/rules.mk

@@ -1,85 +1 @@
-# MCU name
-MCU = atmega32u4
-
-# Processor frequency.
-#     This will define a symbol, F_CPU, in all source code files equal to the
-#     processor frequency in Hz. You can then use this symbol in your source code to
-#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
-#     automatically to create a 32-bit value in your source code.
-#
-#     This will be an integer division of F_USB below, as it is sourced by
-#     F_USB after it has run through any CPU prescalers. Note that this value
-#     does not *change* the processor frequency - it should merely be updated to
-#     reflect the processor speed set externally so that the code can use accurate
-#     software delays.
-F_CPU = 16000000
-
-
-#
-# LUFA specific
-#
-# Target architecture (see library "Board Types" documentation).
-ARCH = AVR8
-
-# Input clock frequency.
-#     This will define a symbol, F_USB, in all source code files equal to the
-#     input clock frequency (before any prescaling is performed) in Hz. This value may
-#     differ from F_CPU if prescaling is used on the latter, and is required as the
-#     raw input clock is fed directly to the PLL sections of the AVR for high speed
-#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
-#     at the end, this will be done automatically to create a 32-bit value in your
-#     source code.
-#
-#     If no clock division is performed on the input clock inside the AVR (via the
-#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
-F_USB = $(F_CPU)
-
-# Interrupt driven control endpoint task(+60)
-OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
-
-
-# Bootloader selection
-#   Teensy       halfkay
-#   Pro Micro    caterina
-#   Atmel DFU    atmel-dfu
-#   LUFA DFU     lufa-dfu
-#   QMK DFU      qmk-dfu
-#   atmega32a    bootloadHID
-BOOTLOADER = atmel-dfu
-
-
-# If you don't know the bootloader type, then you can specify the
-# Boot Section Size in *bytes* by uncommenting out the OPT_DEFS line
-#   Teensy halfKay      512
-#   Teensy++ halfKay    1024
-#   Atmel DFU loader    4096
-#   LUFA bootloader     4096
-#   USBaspLoader        2048
-# OPT_DEFS += -DBOOTLOADER_SIZE=4096
-
-
-# Build Options
-#   change yes to no to disable
-#
-BOOTMAGIC_ENABLE = no      # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
-EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
-CONSOLE_ENABLE = yes        # Console for debug(+400)
-COMMAND_ENABLE = yes        # Commands for debug and configuration
-# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
-SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
-# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-NKRO_ENABLE = yes            # USB Nkey Rollover
-BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality on B7 by default
-RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
-MIDI_ENABLE = no            # MIDI support (+2400 to 4200, depending on config)
-UNICODE_ENABLE = no         # Unicode
-BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
-AUDIO_ENABLE = no           # Audio output on port C6
-FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
-HD44780_ENABLE = no 		# Enable support for HD44780 based LCDs (+400)
-
-SRC += keyboards/wilba_tech/wt_main.c
-
-RAW_ENABLE = yes
-DYNAMIC_KEYMAP_ENABLE = yes
+VIA_ENABLE = yes

keyboards/atreus62/keymaps/hvp/config.h

@@ -0,0 +1,5 @@
+#pragma once
+
+#define TAPPING_TERM 150
+#define IGNORE_MOD_TAP_INTERRUPT
+#define PERMISSIVE_HOLD

keyboards/atreus62/keymaps/hvp/keymap.c

@@ -0,0 +1,67 @@
+
+#include QMK_KEYBOARD_H
+#include "hvp.c"
+
+// Each layer gets a name for readability, which is then used in the keymap matrix below.
+// The underscores don't mean anything - you can have a layer called STUFF or any other name.
+// Layer names don't all need to be of the same length, obviously, and you can also skip them
+// entirely and just use numbers.
+
+#define LT3_ESC LT(3, KC_ESC)
+#define LT4_TAB LT(4, KC_TAB)
+#define LT1_ENT LT(1, KC_ENTER)
+#define LT2_BSP LT(2, KC_BSPC)
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+  LAYOUT( /* qwerty */
+    KC_GRV,   KC_1,   KC_2,   KC_3,   KC_4,   KC_5,                        KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_BSPC ,
+    LT4_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,                        KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_BSPC ,
+    LT3_ESC,   KC_A,    KC_S,    KC_D,    LT(3,KC_F),    LT(4,KC_G),                        KC_H,    KC_J,    KC_K,    KC_L,    TD(TD1), TD(TD2) ,
+    KC_LSFT,  KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,                        KC_N,    KC_M,    KC_COMM, KC_DOT,  TD(TD3), KC_SFTENT ,
+    KC_LCTL,  KC_APP, _______, KC_LGUI,  KC_LALT,SFT_T(KC_SPC), LT2_BSP,   LT1_ENT,   SFT_T(KC_SPC),  KC_LSFT,  KC_LEFT, KC_DOWN, KC_UP,  KC_RGHT
+  ),
+
+  LAYOUT( /* Right */
+    KC_GRV,   KC_1,    KC_2,    KC_3,    KC_4,    KC_5,                        KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS ,
+    KC_DEL,   KC_1,    KC_2,    KC_3,    KC_4,    KC_5,                        KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_BSPC ,
+    KC_DEL,  _______, _______, _______, _______, KC_LEFT_PAREN,                KC_RIGHT_PAREN,  KC_MINS, KC_EQL,  KC_LBRC, KC_RBRC, KC_BSLS,
+    _______, _______, _______, _______, _______, KC_LBRC,                     KC_RBRC, KC_UNDS, KC_PLUS,  KC_LCBR, KC_RCBR, KC_PIPE, 
+    _______, _______, _______, _______, _______, _______, _______,  _______,  _______, _______, KC_HOME, KC_PGDN, KC_PGUP, KC_END
+  ),
+
+  LAYOUT(/* Left */
+    KC_GRV,   KC_1,    KC_2,    KC_3,    KC_4,    KC_5,                        KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS ,
+    KC_TILDE,  KC_EXCLAIM,  KC_AT,  KC_HASH,  KC_DOLLAR, KC_PERCENT,      KC_CIRCUMFLEX, KC_AMPERSAND, KC_ASTERISK, KC_LEFT_PAREN, KC_RIGHT_PAREN, KC_BSPC,
+    KC_DELETE, _______, _______, _______, _______, KC_LEFT_PAREN, KC_RIGHT_PAREN,            KC_UNDS, KC_PLUS,  KC_LCBR, KC_RCBR, KC_BSLS,
+    _______  , _______  , _______  , _______  , _______  , KC_LEFT_CURLY_BRACE  ,                     KC_RIGHT_CURLY_BRACE  ,KC_MINS, KC_EQL,  KC_LBRC, KC_RBRC, KC_TILD,
+    _______  , _______  , _______  , _______  , _______  , _______  , _______  ,  _______  ,  _______  , _______  , KC_HOME, KC_PGDN, KC_PGUP, KC_END
+  ),
+
+
+  LAYOUT(/* Esc */
+    KC_F1,  KC_F2, KC_F3, KC_F4, KC_F5, KC_F6,                     KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12,
+    KC_F1,  KC_F2, KC_F3, KC_F4, KC_F5, KC_F6,                     KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12,
+    KC_NO,  KC_NO, KC_NO, D_NAVI, KC_NO, KC_NO,                     KC_LEFT, KC_DOWN, KC_UP, KC_RGHT, KC_NO, KC_NO ,
+    KC_NO,  KC_NO, KC_NO, KC_NO, KC_NO, KC_NO,                     KC_HOME, KC_PGDN, KC_PGUP, KC_END, KC_NO, KC_NO ,
+    KC_NO,  KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_MSTP,  KC_MPLY,  KC_NO, KC_MUTE, KC_MPRV, KC_VOLD, KC_VOLU, KC_MNXT
+  ),
+
+
+  
+  LAYOUT(/* Tab */
+    _______,   KC_1,    KC_2,    KC_3,    KC_4,    KC_5,                        KC_6,    KC_7,    KC_8,    KC_9,    KC_0, _______ ,
+    _______,  _______, _______, _______, _______, _______,                     _______, KC_4, KC_5, KC_6, _______, _______ ,
+    _______,  _______, _______, _______, _______, _______,                     KC_0, KC_1, KC_2, KC_3, _______, _______ ,
+    KC_PSCR,  _______, _______, _______, _______, _______,                     _______, _______, _______, _______, _______, _______ ,
+    RESET,  _______, _______, _______, _______, _______, _______,  _______,  _______, _______, _______, _______, _______, _______
+  ),
+  /*
+  [_TRNS] = LAYOUT(
+    _______,  _______, _______, _______, _______, _______,                     _______, _______, _______, _______, _______, _______ ,
+    _______,  _______, _______, _______, _______, _______,                     _______, _______, _______, _______, _______, _______ ,
+    _______,  _______, _______, _______, _______, _______,                     _______, _______, _______, _______, _______, _______ ,
+    _______,  _______, _______, _______, _______, _______,                     _______, _______, _______, _______, _______, _______ ,
+    _______,  _______, _______, _______, _______, _______, _______,  _______,  _______, _______, _______, _______, _______, _______
+  ),
+  */
+};

keyboards/atreus62/keymaps/hvp/readme.md

@@ -0,0 +1,10 @@
+Keyboard: Atreus62  
+Keys: 62 keyed ortho staggered keyboard with a split layout and num row.  
+Layout: Swedish characters on main layer using tap dance. Built for Eurkey keyboard layout.  
+Flash instructions: Flash using avrdude, will req the hvp user space to compile.
+
+> make make atreus62:hvp:avrdude
+
+Links:  
+Github - https://github.com/qmk/qmk_firmware/tree/master/keyboards/atreus62  
+Eurkey layout - https://eurkey.steffen.bruentjen.eu/

keyboards/atreus62/keymaps/hvp/rules.mk

@@ -0,0 +1 @@
+TAP_DANCE_ENABLE = yes

keyboards/bfake/bfake.c

@@ -17,9 +17,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #include "bfake.h"
 
-__attribute__ ((weak))
-void matrix_scan_user(void) {}
-
 void backlight_init_ports(void) {
 	setPinOutput(D0);
 	setPinOutput(D1);

keyboards/bfake/config.h

@@ -32,7 +32,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define MATRIX_COLS 11
 
 #define MATRIX_ROW_PINS { B0, B1, B2, B3, B4, B5, B6, B7 }
-#define MATRIX_COL_PINS { A0, A1, A2, A3, A4, A5, A6, A7, C7, C6}
+#define MATRIX_COL_PINS { A0, A1, A2, A3, A4, A5, A6, A7, C7, C6, C5 }
 #define UNUSED_PINS
 
 #define DIODE_DIRECTION COL2ROW

keyboards/bfake/matrix.c

@@ -1,106 +0,0 @@
-/*
-Copyright 2017 Luiz Ribeiro <luizribeiro@gmail.com>
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program.  If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#include <avr/io.h>
-#include <util/delay.h>
-
-#include "matrix.h"
-
-#ifndef DEBOUNCE
-#define DEBOUNCE	5
-#endif
-
-static uint8_t debouncing = DEBOUNCE;
-
-static matrix_row_t matrix[MATRIX_ROWS];
-static matrix_row_t matrix_debouncing[MATRIX_ROWS];
-
-void matrix_init(void) {
-    // all outputs for rows high
-    DDRB = 0xFF;
-    PORTB = 0xFF;
-    // all inputs for columns
-    DDRA = 0x00;
-    DDRC &= ~(0x111111<<2);
-    DDRD &= ~(1<<PIND7);
-    // all columns are pulled-up
-    PORTA = 0xFF;
-    PORTC |= (0b111111<<2);
-    PORTD |= (1<<PIND7);
-
-    // initialize matrix state: all keys off
-    for (uint8_t row = 0; row < MATRIX_ROWS; row++) {
-        matrix[row] = 0x00;
-        matrix_debouncing[row] = 0x00;
-    }
-}
-
-void matrix_set_row_status(uint8_t row) {
-    DDRB = (1 << row);
-    PORTB = ~(1 << row);
-}
-
-uint8_t bit_reverse(uint8_t x) {
-    x = ((x >> 1) & 0x55) | ((x << 1) & 0xaa);
-    x = ((x >> 2) & 0x33) | ((x << 2) & 0xcc);
-    x = ((x >> 4) & 0x0f) | ((x << 4) & 0xf0);
-    return x;
-}
-
-uint8_t matrix_scan(void) {
-    for (uint8_t row = 0; row < MATRIX_ROWS; row++) {
-        matrix_set_row_status(row);
-        _delay_us(5);
-
-        matrix_row_t cols = (
-            // cols 0..7, PORTA 0 -> 7
-            (~PINA) & 0xFF
-        ) | (
-            // cols 8..13, PORTC 7 -> 0
-            bit_reverse((~PINC) & 0xFF) << 8
-        ) | (
-            // col 14, PORTD 7
-            ((~PIND) & (1 << PIND7)) << 7
-        );
-
-        if (matrix_debouncing[row] != cols) {
-            matrix_debouncing[row] = cols;
-            debouncing = DEBOUNCE;
-        }
-    }
-
-    if (debouncing) {
-        if (--debouncing) {
-            _delay_ms(1);
-        } else {
-            for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
-                matrix[i] = matrix_debouncing[i];
-            }
-        }
-    }
-
-    matrix_scan_user();
-
-    return 1;
-}
-
-inline matrix_row_t matrix_get_row(uint8_t row) {
-    return matrix[row];
-}
-
-void matrix_print(void) {
-}

keyboards/bfake/rules.mk

@@ -22,7 +22,3 @@ RGBLIGHT_ENABLE = no
 WS2812_DRIVER = i2c
 
 OPT_DEFS = -DDEBUG_LEVEL=0
-
-# custom matrix setup
-CUSTOM_MATRIX = yes
-SRC = matrix.c

keyboards/cannonkeys/an_c/config.h

@@ -58,26 +58,9 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define PIN_WS2812      15
 #define WS2812_SPI SPID2
 
-
-// EEPROM usage
-// TODO: refactor with new user EEPROM code (coming soon)
-#define EEPROM_MAGIC 0x451F
-#define EEPROM_MAGIC_ADDR 40
-// Bump this every time we change what we store
-// This will automatically reset the EEPROM with defaults
-// and avoid loading invalid data from the EEPROM
-#define EEPROM_VERSION 0x03
-#define EEPROM_VERSION_ADDR 42
-
-
-#define DYNAMIC_KEYMAP_LAYER_COUNT 4
-// Dynamic macro starts after dynamic keymaps (35+(4*5*15*2)) = (35+600) = 635
-// start + layer * rows * col * 2
-#define DYNAMIC_KEYMAP_EEPROM_ADDR 43
-#define EEPROM_CUSTOM_BACKLIGHT 644
-#define DYNAMIC_KEYMAP_MACRO_EEPROM_ADDR 645
-#define DYNAMIC_KEYMAP_MACRO_EEPROM_SIZE 192
-#define DYNAMIC_KEYMAP_MACRO_COUNT 16
+// Backlight config starts after VIA's EEPROM usage,
+// dynamic keymaps start after this.
+#define VIA_EEPROM_CUSTOM_CONFIG_SIZE 1
 
 /*
  * Feature disable options

keyboards/cannonkeys/an_c/keymaps/via/rules.mk

@@ -1,5 +1 @@
-# rules.mk overrides to enable VIA
-
-RAW_ENABLE = yes
-DYNAMIC_KEYMAP_ENABLE = yes
-
+VIA_ENABLE = yes

keyboards/cannonkeys/an_c/rules.mk

@@ -53,7 +53,4 @@ CUSTOM_MATRIX = no # Custom matrix file
 # BACKLIGHT_ENABLE = yes # This is broken on 072 for some reason
 RGBLIGHT_ENABLE = yes
 
-# RAW_ENABLE = yes
-# DYNAMIC_KEYMAP_ENABLE = yes
-
 LAYOUTS = 60_ansi 60_tsangan_hhkb

keyboards/cannonkeys/chimera65/config.h

@@ -50,26 +50,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 /* Locking resynchronize hack */
 #define LOCKING_RESYNC_ENABLE
 
-// EEPROM usage
-// TODO: refactor with new user EEPROM code (coming soon)
-#define EEPROM_MAGIC 0x451F
-#define EEPROM_MAGIC_ADDR 34
-// Bump this every time we change what we store
-// This will automatically reset the EEPROM with defaults
-// and avoid loading invalid data from the EEPROM
-#define EEPROM_VERSION 0x02
-#define EEPROM_VERSION_ADDR 36
-
-
-#define DYNAMIC_KEYMAP_LAYER_COUNT 4
-// Dynamic macro starts after dynamic keymaps (35+(4*5*15*2)) = (35+600) = 635
-// start + layer * rows * col * 2
-#define DYNAMIC_KEYMAP_EEPROM_ADDR 37
-#define EEPROM_CUSTOM_BACKLIGHT 678
-#define DYNAMIC_KEYMAP_MACRO_EEPROM_ADDR 679
-#define DYNAMIC_KEYMAP_MACRO_EEPROM_SIZE 202
-#define DYNAMIC_KEYMAP_MACRO_COUNT 16
-
 /*
  * Feature disable options
  *  These options are also useful to firmware size reduction.

keyboards/cannonkeys/chimera65/keymaps/via/rules.mk

@@ -1,5 +1 @@
-# rules.mk overrides to enable VIA
-
-RAW_ENABLE = yes
-DYNAMIC_KEYMAP_ENABLE = yes
-
+VIA_ENABLE = yes

keyboards/cannonkeys/chimera65/rules.mk

@@ -52,6 +52,3 @@ NKRO_ENABLE = yes	    # USB Nkey Rollover
 CUSTOM_MATRIX = no # Custom matrix file
 # BACKLIGHT_ENABLE = yes # This is broken on 072 for some reason
 RGBLIGHT_ENABLE = no
-
-# RAW_ENABLE = yes
-# DYNAMIC_KEYMAP_ENABLE = yes

keyboards/cannonkeys/instant60/config.h

@@ -58,26 +58,9 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define PIN_WS2812      15
 #define WS2812_SPI SPID2
 
-
-// EEPROM usage
-// TODO: refactor with new user EEPROM code (coming soon)
-#define EEPROM_MAGIC 0x451F
-#define EEPROM_MAGIC_ADDR 40
-// Bump this every time we change what we store
-// This will automatically reset the EEPROM with defaults
-// and avoid loading invalid data from the EEPROM
-#define EEPROM_VERSION 0x03
-#define EEPROM_VERSION_ADDR 42
-
-
-#define DYNAMIC_KEYMAP_LAYER_COUNT 4
-// Dynamic macro starts after dynamic keymaps (35+(4*5*15*2)) = (35+600) = 635
-// start + layer * rows * col * 2
-#define DYNAMIC_KEYMAP_EEPROM_ADDR 43
-#define EEPROM_CUSTOM_BACKLIGHT 644
-#define DYNAMIC_KEYMAP_MACRO_EEPROM_ADDR 645
-#define DYNAMIC_KEYMAP_MACRO_EEPROM_SIZE 192
-#define DYNAMIC_KEYMAP_MACRO_COUNT 16
+// Backlight config starts after VIA's EEPROM usage,
+// dynamic keymaps start after this.
+#define VIA_EEPROM_CUSTOM_CONFIG_SIZE 1
 
 /*
  * Feature disable options

keyboards/cannonkeys/instant60/keymaps/via/rules.mk

@@ -1,5 +1 @@
-# rules.mk overrides to enable VIA
-
-RAW_ENABLE = yes
-DYNAMIC_KEYMAP_ENABLE = yes
-
+VIA_ENABLE = yes

keyboards/cannonkeys/instant60/keymaps/via_standard/rules.mk

@@ -1,5 +1 @@
-# rules.mk overrides to enable VIA
-
-RAW_ENABLE = yes
-DYNAMIC_KEYMAP_ENABLE = yes
-
+VIA_ENABLE = yes

keyboards/cannonkeys/instant60/rules.mk

@@ -55,7 +55,4 @@ CUSTOM_MATRIX = no # Custom matrix file
 # BACKLIGHT_ENABLE = yes # This is broken on 072 for some reason
 RGBLIGHT_ENABLE = yes
 
-# RAW_ENABLE = yes
-# DYNAMIC_KEYMAP_ENABLE = yes
-
 LAYOUTS = 60_ansi 60_tsangan_hhkb

keyboards/cannonkeys/iron165/config.h

@@ -50,25 +50,9 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 /* Locking resynchronize hack */
 #define LOCKING_RESYNC_ENABLE
 
-// EEPROM usage
-// TODO: refactor with new user EEPROM code (coming soon)
-#define EEPROM_MAGIC 0x451F
-#define EEPROM_MAGIC_ADDR 40
-// Bump this every time we change what we store
-// This will automatically reset the EEPROM with defaults
-// and avoid loading invalid data from the EEPROM
-#define EEPROM_VERSION 0x02
-#define EEPROM_VERSION_ADDR 42
-
-
-#define DYNAMIC_KEYMAP_LAYER_COUNT 4
-// Dynamic macro starts after dynamic keymaps (35+(4*5*15*2)) = (35+600) = 635
-// start + layer * rows * col * 2
-#define DYNAMIC_KEYMAP_EEPROM_ADDR 43
-#define EEPROM_CUSTOM_BACKLIGHT 684
-#define DYNAMIC_KEYMAP_MACRO_EEPROM_ADDR 685
-#define DYNAMIC_KEYMAP_MACRO_EEPROM_SIZE 192
-#define DYNAMIC_KEYMAP_MACRO_COUNT 16
+// Backlight config starts after VIA's EEPROM usage,
+// dynamic keymaps start after this.
+#define VIA_EEPROM_CUSTOM_CONFIG_SIZE 1
 
 /*
  * Feature disable options

keyboards/cannonkeys/satisfaction75/config.h

@@ -64,41 +64,14 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #endif
 
-
-#define DYNAMIC_KEYMAP_LAYER_COUNT 4
-
-// EEPROM usage
-
-// TODO: refactor with new user EEPROM code (coming soon)
-#define EEPROM_MAGIC 0x451F
-#define EEPROM_MAGIC_ADDR 40
-// Bump this every time we change what we store
-// This will automatically reset the EEPROM with defaults
-// and avoid loading invalid data from the EEPROM
-#define EEPROM_VERSION 0x01
-#define EEPROM_VERSION_ADDR 42
-
-// Dynamic keymap starts after EEPROM version
-#define DYNAMIC_KEYMAP_EEPROM_ADDR 43
-
-// Dynamic macro starts after dynamic keymaps (35+(4*6*16*2)) = (35+768) = 803
-
-// I'm also putting my custom stuff after that
-// 1 for enabled encoder modes
-// 1 for custom backlighting controls
-// 1 for OLED default mode
-// 6 for 3x custom encoder settings, left, right, and press (18 total)
-
-#define DYNAMIC_KEYMAP_ENABLED_ENCODER_MODES 811
-#define DYNAMIC_KEYMAP_CUSTOM_BACKLIGHT 812
-#define DYNAMIC_KEYMAP_DEFAULT_OLED 813
-#define DYNAMIC_KEYMAP_CUSTOM_ENCODER 814
-
-#define DYNAMIC_KEYMAP_MACRO_EEPROM_ADDR 832
-#define DYNAMIC_KEYMAP_MACRO_EEPROM_SIZE 192
-#define DYNAMIC_KEYMAP_MACRO_COUNT 16
-
-
+// Custom config starts after VIA's EEPROM usage,
+// dynamic keymaps start after this.
+// Custom config Usage:
+// 1 for enabled encoder modes (1 byte)
+// 1 for custom backlighting controls (1 byte)
+// 1 for OLED default mode (1 byte)
+// 6 for 3x custom encoder settings, left, right, and press (18 bytes)
+#define VIA_EEPROM_CUSTOM_CONFIG_SIZE 21
 
 /*
  * Feature disable options

keyboards/cannonkeys/satisfaction75/keymaps/boy_314/rules.mk

@@ -1,4 +1,3 @@
 # rules.mk overrides to enable VIA
 
-RAW_ENABLE = yes
-DYNAMIC_KEYMAP_ENABLE = yes
+VIA_ENABLE = yes

keyboards/cannonkeys/satisfaction75/keymaps/via/rules.mk

@@ -1,5 +1 @@
-# rules.mk overrides to enable VIA
-
-RAW_ENABLE = yes
-DYNAMIC_KEYMAP_ENABLE = yes
-
+VIA_ENABLE = yes

keyboards/cannonkeys/satisfaction75/prototype/prototype.h

@@ -17,3 +17,20 @@
 	{ K400,  K401,  K402,  K403,  K404,  K405,  K406,  K407,  K408,  K409,  K410,  K411,  KC_NO, K413,  KC_NO,  K415 }, \
 	{ K500,  K501,  K502,  KC_NO, KC_NO, K505,  KC_NO, KC_NO, KC_NO, K509,  K510,  K511,  K512,  K513,  KC_NO,  K515 } \
 }
+
+// Expose All Keys - Split backspace - ISO Extra keys - Split space bottom row
+#define LAYOUT_all( \
+	K000,       K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013,             \
+	K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, K115, \
+	K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213,       K215, \
+	K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313,       K315, \
+	K400, K401, K402, K403, K404, K405, K406, K407, K408, K409, K410, K411, K412, K413,       K415, \
+	K500, K501, K502, K503,       K505,       K507,       K509, K510, K511, K512, K513,       K515  \
+) { \
+	{ K000,  KC_NO, K002,  K003,  K004,  K005,  K006,  K007,  K008,  K009,  K010,  K011,  K012,  K013,  KC_NO,  KC_NO }, \
+	{ K100,  K101,  K102,  K103,  K104,  K105,  K106,  K107,  K108,  K109,  K110,  K111,  K112,  K113,  K114,   K115 }, \
+	{ K200,  K201,  K202,  K203,  K204,  K205,  K206,  K207,  K208,  K209,  K210,  K211,  K212,  K213,  KC_NO,  K215 }, \
+	{ K300,  K301,  K302,  K303,  K304,  K305,  K306,  K307,  K308,  K309,  K310,  K311,  K312,  K313,  KC_NO,  K315 }, \
+	{ K400,  K401,  K402,  K403,  K404,  K405,  K406,  K407,  K408,  K409,  K410,  K411,  K412,  K413,  KC_NO,  K415 }, \
+	{ K500,  K501,  K502,  K503,  KC_NO, K505,  KC_NO, K507,  KC_NO, K509,  K510,  K511,  K512,  K513,  KC_NO,  K515 } \
+}

keyboards/cannonkeys/satisfaction75/rules.mk

@@ -51,7 +51,4 @@ ENCODER_ENABLE = yes
 QWIIC_ENABLE += MICRO_OLED
 #BACKLIGHT_ENABLE = yes
 
-# RAW_ENABLE = yes
-# DYNAMIC_KEYMAP_ENABLE = yes
-
 DEFAULT_FOLDER = cannonkeys/satisfaction75/rev1

keyboards/cannonkeys/satisfaction75/satisfaction75.c

@@ -15,11 +15,7 @@
 #include "raw_hid.h"
 #include "dynamic_keymap.h"
 #include "tmk_core/common/eeprom.h"
-
-// HACK
-#include "keyboards/wilba_tech/via_api.h" // Temporary hack
-#include "keyboards/wilba_tech/via_keycodes.h" // Temporary hack
-
+#include "version.h" // for QMK_BUILDDATE used in EEPROM magic
 
 /* Artificial delay added to get media keys to work in the encoder*/
 #define MEDIA_KEY_DELAY 10
@@ -58,56 +54,20 @@ backlight_config_t kb_backlight_config = {
   .level = BACKLIGHT_LEVELS
 };
 
-bool eeprom_is_valid(void)
+#ifdef VIA_ENABLE
+void raw_hid_receive_kb( uint8_t *data, uint8_t length )
 {
-	return (eeprom_read_word(((void*)EEPROM_MAGIC_ADDR)) == EEPROM_MAGIC &&
-			eeprom_read_byte(((void*)EEPROM_VERSION_ADDR)) == EEPROM_VERSION);
-}
-
-void eeprom_set_valid(bool valid)
-{
-	eeprom_update_word(((void*)EEPROM_MAGIC_ADDR), valid ? EEPROM_MAGIC : 0xFFFF);
-	eeprom_update_byte(((void*)EEPROM_VERSION_ADDR), valid ? EEPROM_VERSION : 0xFF);
-}
-
-void eeprom_reset(void)
-{
-	// Set the VIA specific EEPROM state as invalid.
-	eeprom_set_valid(false);
-	// Set the TMK/QMK EEPROM state as invalid.
-	eeconfig_disable();
-}
-
-#ifdef RAW_ENABLE
-
-void raw_hid_receive( uint8_t *data, uint8_t length )
-{
-	uint8_t *command_id = &(data[0]);
-	uint8_t *command_data = &(data[1]);
-	switch ( *command_id )
-	{
-		case id_get_protocol_version:
-		{
-			command_data[0] = PROTOCOL_VERSION >> 8;
-			command_data[1] = PROTOCOL_VERSION & 0xFF;
-			break;
-		}
-		case id_get_keyboard_value:
-		{
+  uint8_t *command_id = &(data[0]);
+  uint8_t *command_data = &(data[1]);
+  switch ( *command_id )
+  {
+    case id_get_keyboard_value:
+    {
             switch( command_data[0])
             {
-                case id_uptime:
-                {
-                uint32_t value = timer_read32();
-                command_data[1] = (value >> 24 ) & 0xFF;
-                command_data[2] = (value >> 16 ) & 0xFF;
-                command_data[3] = (value >> 8 ) & 0xFF;
-                command_data[4] = value & 0xFF;
-                break;
-                }
                 case id_oled_default_mode:
                 {
-                    uint8_t default_oled = eeprom_read_byte((uint8_t*)DYNAMIC_KEYMAP_DEFAULT_OLED);
+                    uint8_t default_oled = eeprom_read_byte((uint8_t*)EEPROM_DEFAULT_OLED);
                     command_data[1] = default_oled;
                     break;
                 }
@@ -141,15 +101,14 @@ void raw_hid_receive( uint8_t *data, uint8_t length )
                     break;
                 }
             }
-			break;
+      break;
     }
-#ifdef DYNAMIC_KEYMAP_ENABLE
     case id_set_keyboard_value:
     {
       switch(command_data[0]){
         case id_oled_default_mode:
         {
-          eeprom_update_byte((uint8_t*)DYNAMIC_KEYMAP_DEFAULT_OLED, command_data[1]);
+          eeprom_update_byte((uint8_t*)EEPROM_DEFAULT_OLED, command_data[1]);
           break;
         }
         case id_oled_mode:
@@ -161,7 +120,7 @@ void raw_hid_receive( uint8_t *data, uint8_t length )
         case id_encoder_modes:
         {
           enabled_encoder_modes = command_data[1];
-          eeprom_update_byte((uint8_t*)DYNAMIC_KEYMAP_ENABLED_ENCODER_MODES, enabled_encoder_modes);
+          eeprom_update_byte((uint8_t*)EEPROM_ENABLED_ENCODER_MODES, enabled_encoder_modes);
           break;
         }
         case id_encoder_custom:
@@ -180,95 +139,15 @@ void raw_hid_receive( uint8_t *data, uint8_t length )
       }
       break;
     }
-		case id_dynamic_keymap_get_keycode:
-		{
-			uint16_t keycode = dynamic_keymap_get_keycode( command_data[0], command_data[1], command_data[2] );
-			command_data[3] = keycode >> 8;
-			command_data[4] = keycode & 0xFF;
-			break;
-		}
-		case id_dynamic_keymap_set_keycode:
-		{
-			dynamic_keymap_set_keycode( command_data[0], command_data[1], command_data[2], ( command_data[3] << 8 ) | command_data[4] );
-			break;
-		}
-		case id_dynamic_keymap_reset:
-		{
-			dynamic_keymap_reset();
-			break;
-		}
-		case id_dynamic_keymap_macro_get_count:
-		{
-			command_data[0] = dynamic_keymap_macro_get_count();
-			break;
-		}
-		case id_dynamic_keymap_macro_get_buffer_size:
-		{
-			uint16_t size = dynamic_keymap_macro_get_buffer_size();
-			command_data[0] = size >> 8;
-			command_data[1] = size & 0xFF;
-			break;
-		}
-		case id_dynamic_keymap_macro_get_buffer:
-		{
-			uint16_t offset = ( command_data[0] << 8 ) | command_data[1];
-			uint16_t size = command_data[2]; // size <= 28
-			dynamic_keymap_macro_set_buffer( offset, size, &command_data[3] );
-			break;
-		}
-		case id_dynamic_keymap_macro_reset:
-		{
-			dynamic_keymap_macro_reset();
-			break;
-		}
-		case id_dynamic_keymap_get_layer_count:
-		{
-			command_data[0] = dynamic_keymap_get_layer_count();
-			break;
-		}
-		case id_dynamic_keymap_get_buffer:
-		{
-			uint16_t offset = ( command_data[0] << 8 ) | command_data[1];
-			uint16_t size = command_data[2]; // size <= 28
-			dynamic_keymap_get_buffer( offset, size, &command_data[3] );
-			break;
-		}
-		case id_dynamic_keymap_set_buffer:
-		{
-			uint16_t offset = ( command_data[0] << 8 ) | command_data[1];
-			uint16_t size = command_data[2]; // size <= 28
-			dynamic_keymap_set_buffer( offset, size, &command_data[3] );
-			break;
-		}
-#endif // DYNAMIC_KEYMAP_ENABLE
-		case id_eeprom_reset:
-		{
-			eeprom_reset();
-			break;
-		}
-		case id_bootloader_jump:
-		{
-			// Need to send data back before the jump
-			// Informs host that the command is handled
-			raw_hid_send( data, length );
-			// Give host time to read it
-			wait_ms(100);
-			bootloader_jump();
-			break;
-		}
-		default:
-		{
-			// Unhandled message.
-			*command_id = id_unhandled;
-			break;
-		}
-	}
-
-	// Return same buffer with values changed
-	raw_hid_send( data, length );
-
+    default:
+    {
+      // Unhandled message.
+      *command_id = id_unhandled;
+      break;
+    }
+  }
+  // DO NOT call raw_hid_send(data,length) here, let caller do this
 }
-
 #endif
 
 
@@ -349,18 +228,6 @@ bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
       break;
   }
 
-#ifdef DYNAMIC_KEYMAP_ENABLE
-	// Handle macros
-	if (record->event.pressed) {
-		if ( keycode >= MACRO00 && keycode <= MACRO15 )
-		{
-			uint8_t id = keycode - MACRO00;
-			dynamic_keymap_macro_send(id);
-			return false;
-		}
-	}
-#endif //DYNAMIC_KEYMAP_ENABLE
-
   return process_record_user(keycode, record);
 }
 
@@ -392,59 +259,56 @@ void encoder_update_kb(uint8_t index, bool clockwise) {
   }
 }
 
-void dynamic_keymap_custom_reset(void){
-  void *p = (void*)(DYNAMIC_KEYMAP_CUSTOM_BACKLIGHT);
-	void *end = (void*)(DYNAMIC_KEYMAP_MACRO_EEPROM_ADDR);
-	while ( p != end ) {
-		eeprom_update_byte(p, 0);
-		++p;
-	}
-  eeprom_update_byte((uint8_t*)DYNAMIC_KEYMAP_ENABLED_ENCODER_MODES, 0x1F);
+void custom_config_reset(void){
+  void *p = (void*)(VIA_EEPROM_CUSTOM_CONFIG_ADDR);
+  void *end = (void*)(VIA_EEPROM_CUSTOM_CONFIG_ADDR+VIA_EEPROM_CUSTOM_CONFIG_SIZE);
+  while ( p != end ) {
+    eeprom_update_byte(p, 0);
+    ++p;
+  }
+  eeprom_update_byte((uint8_t*)EEPROM_ENABLED_ENCODER_MODES, 0x1F);
 }
 
-void save_backlight_config_to_eeprom(){
-  eeprom_update_byte((uint8_t*)DYNAMIC_KEYMAP_CUSTOM_BACKLIGHT, kb_backlight_config.raw);
+void backlight_config_save(){
+  eeprom_update_byte((uint8_t*)EEPROM_CUSTOM_BACKLIGHT, kb_backlight_config.raw);
 }
 
-void load_custom_config(){
-  kb_backlight_config.raw = eeprom_read_byte((uint8_t*)DYNAMIC_KEYMAP_CUSTOM_BACKLIGHT);
+void custom_config_load(){
+  kb_backlight_config.raw = eeprom_read_byte((uint8_t*)EEPROM_CUSTOM_BACKLIGHT);
 #ifdef DYNAMIC_KEYMAP_ENABLE
-  oled_mode = eeprom_read_byte((uint8_t*)DYNAMIC_KEYMAP_DEFAULT_OLED);
-  enabled_encoder_modes = eeprom_read_byte((uint8_t*)DYNAMIC_KEYMAP_ENABLED_ENCODER_MODES);
+  oled_mode = eeprom_read_byte((uint8_t*)EEPROM_DEFAULT_OLED);
+  enabled_encoder_modes = eeprom_read_byte((uint8_t*)EEPROM_ENABLED_ENCODER_MODES);
 #endif
 }
 
-void eeprom_init_kb(void)
+// Called from via_init() if VIA_ENABLE
+// Called from matrix_init_kb() if not VIA_ENABLE
+void via_init_kb(void)
 {
-	// If the EEPROM has the magic, the data is good.
-	// OK to load from EEPROM.
-	if (eeprom_is_valid()) {
-		load_custom_config();
-	} else	{
-		// If the EEPROM has not been saved before, or is out of date,
-		// save the default values to the EEPROM. Default values
-		// come from construction of the zeal_backlight_config instance.
-		//backlight_config_save();
+  // If the EEPROM has the magic, the data is good.
+  // OK to load from EEPROM.
+  if (via_eeprom_is_valid()) {
+    custom_config_load();
+  } else	{
 #ifdef DYNAMIC_KEYMAP_ENABLE
-		// This resets the keymaps in EEPROM to what is in flash.
-		dynamic_keymap_reset();
-		// This resets the macros in EEPROM to nothing.
-		dynamic_keymap_macro_reset();
     // Reset the custom stuff
-    dynamic_keymap_custom_reset();
+    custom_config_reset();
 #endif
-		// Save the magic number last, in case saving was interrupted
-		eeprom_set_valid(true);
-	}
+    // DO NOT set EEPROM valid here, let caller do this
+  }
 }
 
 void matrix_init_kb(void)
 {
-	eeprom_init_kb();
+#ifndef VIA_ENABLE
+  via_init_kb();
+  via_eeprom_set_valid(true);
+#endif // VIA_ENABLE
+
   rtcGetTime(&RTCD1, &last_timespec);
   queue_for_send = true;
   backlight_init_ports();
-	matrix_init_user();
+  matrix_init_user();
 }
 
 
@@ -472,3 +336,51 @@ void matrix_scan_kb(void) {
 #endif
 }
 
+//
+// In the case of VIA being disabled, we still need to check if
+// keyboard level EEPROM memory is valid before loading.
+// Thus these are copies of the same functions in VIA, since
+// the backlight settings reuse VIA's EEPROM magic/version,
+// and the ones in via.c won't be compiled in.
+//
+// Yes, this is sub-optimal, and is only here for completeness
+// (i.e. catering to the 1% of people that want wilba.tech LED bling
+// AND want persistent settings BUT DON'T want to use dynamic keymaps/VIA).
+//
+#ifndef VIA_ENABLE
+
+bool via_eeprom_is_valid(void)
+{
+    char *p = QMK_BUILDDATE; // e.g. "2019-11-05-11:29:54"
+    uint8_t magic0 = ( ( p[2] & 0x0F ) << 4 ) | ( p[3]  & 0x0F );
+    uint8_t magic1 = ( ( p[5] & 0x0F ) << 4 ) | ( p[6]  & 0x0F );
+    uint8_t magic2 = ( ( p[8] & 0x0F ) << 4 ) | ( p[9]  & 0x0F );
+
+    return (eeprom_read_byte( (void*)VIA_EEPROM_MAGIC_ADDR+0 ) == magic0 &&
+            eeprom_read_byte( (void*)VIA_EEPROM_MAGIC_ADDR+1 ) == magic1 &&
+            eeprom_read_byte( (void*)VIA_EEPROM_MAGIC_ADDR+2 ) == magic2 );
+}
+
+// Sets VIA/keyboard level usage of EEPROM to valid/invalid
+// Keyboard level code (eg. via_init_kb()) should not call this
+void via_eeprom_set_valid(bool valid)
+{
+    char *p = QMK_BUILDDATE; // e.g. "2019-11-05-11:29:54"
+    uint8_t magic0 = ( ( p[2] & 0x0F ) << 4 ) | ( p[3]  & 0x0F );
+    uint8_t magic1 = ( ( p[5] & 0x0F ) << 4 ) | ( p[6]  & 0x0F );
+    uint8_t magic2 = ( ( p[8] & 0x0F ) << 4 ) | ( p[9]  & 0x0F );
+
+    eeprom_update_byte( (void*)VIA_EEPROM_MAGIC_ADDR+0, valid ? magic0 : 0xFF);
+    eeprom_update_byte( (void*)VIA_EEPROM_MAGIC_ADDR+1, valid ? magic1 : 0xFF);
+    eeprom_update_byte( (void*)VIA_EEPROM_MAGIC_ADDR+2, valid ? magic2 : 0xFF);
+}
+
+void via_eeprom_reset(void)
+{
+    // Set the VIA specific EEPROM state as invalid.
+    via_eeprom_set_valid(false);
+    // Set the TMK/QMK EEPROM state as invalid.
+    eeconfig_disable();
+}
+
+#endif // VIA_ENABLE

keyboards/cannonkeys/satisfaction75/satisfaction75.h

@@ -8,6 +8,12 @@
     #include "rev1.h"
 #endif
 
+#include "via.h" // only for EEPROM address
+#define EEPROM_ENABLED_ENCODER_MODES (VIA_EEPROM_CUSTOM_CONFIG_ADDR)
+#define EEPROM_CUSTOM_BACKLIGHT (VIA_EEPROM_CUSTOM_CONFIG_ADDR+1)
+#define EEPROM_DEFAULT_OLED (VIA_EEPROM_CUSTOM_CONFIG_ADDR+2)
+#define EEPROM_CUSTOM_ENCODER (VIA_EEPROM_CUSTOM_CONFIG_ADDR+3)
+
 /* screen off after this many milliseconds */
 #define ScreenOffInterval 60000 /* milliseconds */
 
@@ -117,5 +123,5 @@ void backlight_set(uint8_t level);
 bool is_breathing(void);
 void breathing_enable(void);
 void breathing_disable(void);
-void load_custom_config(void);
-void save_backlight_config_to_eeprom(void);
+void custom_config_load(void);
+void backlight_config_save(void);

keyboards/cannonkeys/satisfaction75/satisfaction_encoder.c

@@ -12,7 +12,7 @@ void pre_encoder_mode_change(){
     timespec.millisecond = (hour_config * 60 + minute_config) * 60 * 1000;
     rtcSetTime(&RTCD1, &timespec);
   } else if (encoder_mode == ENC_MODE_BACKLIGHT){
-    save_backlight_config_to_eeprom();
+    backlight_config_save();
   }
 }
 
@@ -221,7 +221,7 @@ uint16_t handle_encoder_press(){
 
 uint16_t retrieve_custom_encoder_config(uint8_t encoder_idx, uint8_t behavior){
 #ifdef DYNAMIC_KEYMAP_ENABLE
-    void* addr = (void*)(DYNAMIC_KEYMAP_CUSTOM_ENCODER + (encoder_idx * 6) + (behavior * 2));
+    void* addr = (void*)(EEPROM_CUSTOM_ENCODER + (encoder_idx * 6) + (behavior * 2));
     //big endian
     uint16_t keycode = eeprom_read_byte(addr) << 8;
     keycode |= eeprom_read_byte(addr + 1);
@@ -233,7 +233,7 @@ uint16_t retrieve_custom_encoder_config(uint8_t encoder_idx, uint8_t behavior){
 
 void set_custom_encoder_config(uint8_t encoder_idx, uint8_t behavior, uint16_t new_code){
 #ifdef DYNAMIC_KEYMAP_ENABLE
-    void* addr = (void*)(DYNAMIC_KEYMAP_CUSTOM_ENCODER + (encoder_idx * 6) + (behavior * 2));
+    void* addr = (void*)(EEPROM_CUSTOM_ENCODER + (encoder_idx * 6) + (behavior * 2));
     eeprom_update_byte(addr, (uint8_t)(new_code >> 8));
     eeprom_update_byte(addr + 1, (uint8_t)(new_code & 0xFF));
 #endif

keyboards/cannonkeys/savage65/config.h

@@ -58,25 +58,9 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define PIN_WS2812      15
 #define WS2812_SPI SPID2
 
-// EEPROM usage
-// TODO: refactor with new user EEPROM code (coming soon)
-#define EEPROM_MAGIC 0x451F
-#define EEPROM_MAGIC_ADDR 40
-// Bump this every time we change what we store
-// This will automatically reset the EEPROM with defaults
-// and avoid loading invalid data from the EEPROM
-#define EEPROM_VERSION 0x02
-#define EEPROM_VERSION_ADDR 42
-
-
-#define DYNAMIC_KEYMAP_LAYER_COUNT 4
-// Dynamic macro starts after dynamic keymaps (35+(4*5*15*2)) = (35+600) = 635
-// start + layer * rows * col * 2
-#define DYNAMIC_KEYMAP_EEPROM_ADDR 43
-#define EEPROM_CUSTOM_BACKLIGHT 684
-#define DYNAMIC_KEYMAP_MACRO_EEPROM_ADDR 685
-#define DYNAMIC_KEYMAP_MACRO_EEPROM_SIZE 192
-#define DYNAMIC_KEYMAP_MACRO_COUNT 16
+// Backlight config starts after VIA's EEPROM usage,
+// dynamic keymaps start after this.
+#define VIA_EEPROM_CUSTOM_CONFIG_SIZE 1
 
 /*
  * Feature disable options

keyboards/cannonkeys/stm32f072/keyboard.c

@@ -10,11 +10,10 @@
 #include "raw_hid.h"
 #include "dynamic_keymap.h"
 #include "tmk_core/common/eeprom.h"
+#include "version.h" // for QMK_BUILDDATE used in EEPROM magic
 
-// HACK
-#include "keyboards/wilba_tech/via_api.h" // Temporary hack
-#include "keyboards/wilba_tech/via_keycodes.h" // Temporary hack
-
+#include "via.h"
+#define EEPROM_CUSTOM_BACKLIGHT (VIA_EEPROM_CUSTOM_CONFIG_ADDR)
 
 backlight_config_t kb_backlight_config = {
   .enable = true,
@@ -22,61 +21,29 @@ backlight_config_t kb_backlight_config = {
   .level = BACKLIGHT_LEVELS
 };
 
-bool eeprom_is_valid(void)
-{
-	return (eeprom_read_word(((void*)EEPROM_MAGIC_ADDR)) == EEPROM_MAGIC &&
-			eeprom_read_byte(((void*)EEPROM_VERSION_ADDR)) == EEPROM_VERSION);
-}
-
-void eeprom_set_valid(bool valid)
-{
-	eeprom_update_word(((void*)EEPROM_MAGIC_ADDR), valid ? EEPROM_MAGIC : 0xFFFF);
-	eeprom_update_byte(((void*)EEPROM_VERSION_ADDR), valid ? EEPROM_VERSION : 0xFF);
-}
-
-void eeprom_reset(void)
-{
-	eeprom_set_valid(false);
-	eeconfig_disable();
-}
-
-void save_backlight_config_to_eeprom(){
+void backlight_config_save(){
   eeprom_update_byte((uint8_t*)EEPROM_CUSTOM_BACKLIGHT, kb_backlight_config.raw);
 }
 
-void load_custom_config(){
+void backlight_config_load(){
   kb_backlight_config.raw = eeprom_read_byte((uint8_t*)EEPROM_CUSTOM_BACKLIGHT);
 }
 
-#ifdef DYNAMIC_KEYMAP_ENABLE
-void dynamic_keymap_custom_reset(void){
-    void *p = (void*)(EEPROM_CUSTOM_BACKLIGHT);
-	void *end = (void*)(DYNAMIC_KEYMAP_MACRO_EEPROM_ADDR);
-	while ( p != end ) {
-		eeprom_update_byte(p, 0);
-		++p;
-	}
-}
-#endif
-
-void eeprom_init_kb(void)
+// Called from via_init() if VIA_ENABLE
+// Called from matrix_init_kb() if not VIA_ENABLE
+void via_init_kb(void)
 {
 	// If the EEPROM has the magic, the data is good.
 	// OK to load from EEPROM.
-	if (eeprom_is_valid()) {
-		load_custom_config();
+	if (via_eeprom_is_valid()) {
+		backlight_config_load();
 	} else	{
-#ifdef DYNAMIC_KEYMAP_ENABLE
-		// This resets the keymaps in EEPROM to what is in flash.
-		dynamic_keymap_reset();
-		// This resets the macros in EEPROM to nothing.
-		dynamic_keymap_macro_reset();
-        // Reset the custom stuff
-        dynamic_keymap_custom_reset();
-#endif
-		// Save the magic number last, in case saving was interrupted
-        save_backlight_config_to_eeprom();
-		eeprom_set_valid(true);
+		// If the EEPROM has not been saved before, or is out of date,
+		// save the default values to the EEPROM. Default values
+		// come from construction of the backlight_config instance.
+		backlight_config_save();
+
+		// DO NOT set EEPROM valid here, let caller do this
 	}
 }
 
@@ -84,7 +51,13 @@ __attribute__ ((weak))
 void matrix_init_board(void);
 
 void matrix_init_kb(void){
-  	eeprom_init_kb();
+	// If VIA is disabled, we still need to load backlight settings.
+	// Call via_init_kb() the same way as via_init(), with setting
+	// EEPROM valid afterwards.
+#ifndef VIA_ENABLE
+	via_init_kb();
+	via_eeprom_set_valid(true);
+#endif // VIA_ENABLE
       /* MOSI pin*/
 #ifdef RGBLIGHT_ENABLE
     palSetPadMode(PORT_WS2812, PIN_WS2812, PAL_MODE_ALTERNATE(0));
@@ -112,7 +85,7 @@ bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
           kb_backlight_config.level = BACKLIGHT_LEVELS;
         }
         backlight_set(kb_backlight_config.level);
-        save_backlight_config_to_eeprom();
+        backlight_config_save();
       }
       return false;
     case BL_TOGG:
@@ -123,7 +96,7 @@ bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
         } else {
           backlight_set(0);
         }
-        save_backlight_config_to_eeprom();
+        backlight_config_save();
       }
       return false;
 
@@ -135,168 +108,71 @@ bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
           kb_backlight_config.level = kb_backlight_config.level - 1;
         }
         backlight_set(kb_backlight_config.level);
-        save_backlight_config_to_eeprom();
+        backlight_config_save();
       }
       return false;
     case BL_BRTG:
       if (record->event.pressed) {
         kb_backlight_config.breathing = !kb_backlight_config.breathing;
         breathing_toggle();
-        save_backlight_config_to_eeprom();
+        backlight_config_save();
       }
       return false;
     default:
         break;
   }
 
-  #ifdef DYNAMIC_KEYMAP_ENABLE
-	// Handle macros
-	if (record->event.pressed) {
-		if ( keycode >= MACRO00 && keycode <= MACRO15 )
-		{
-			uint8_t id = keycode - MACRO00;
-			dynamic_keymap_macro_send(id);
-			return false;
-		}
-	}
-    #endif //DYNAMIC_KEYMAP_ENABLE
-
   return process_record_user(keycode, record);;
 }
 
 
-// Start Dynamic Keymap code
-#ifdef RAW_ENABLE
 
-void raw_hid_receive( uint8_t *data, uint8_t length )
+
+//
+// In the case of VIA being disabled, we still need to check if
+// keyboard level EEPROM memory is valid before loading.
+// Thus these are copies of the same functions in VIA, since
+// the backlight settings reuse VIA's EEPROM magic/version,
+// and the ones in via.c won't be compiled in.
+//
+// Yes, this is sub-optimal, and is only here for completeness
+// (i.e. catering to the 1% of people that want wilba.tech LED bling
+// AND want persistent settings BUT DON'T want to use dynamic keymaps/VIA).
+//
+#ifndef VIA_ENABLE
+
+bool via_eeprom_is_valid(void)
 {
-	uint8_t *command_id = &(data[0]);
-	uint8_t *command_data = &(data[1]);
-	switch ( *command_id )
-	{
-		case id_get_protocol_version:
-		{
-			command_data[0] = PROTOCOL_VERSION >> 8;
-			command_data[1] = PROTOCOL_VERSION & 0xFF;
-			break;
-		}
-		case id_get_keyboard_value:
-		{
-            switch( command_data[0])
-            {
-                case id_uptime:
-                {
-                uint32_t value = timer_read32();
-                command_data[1] = (value >> 24 ) & 0xFF;
-                command_data[2] = (value >> 16 ) & 0xFF;
-                command_data[3] = (value >> 8 ) & 0xFF;
-                command_data[4] = value & 0xFF;
-                break;
-                }
-                default:
-                {
-                *command_id = id_unhandled;
-                break;
-                }
-            }
-            break;
-        }
-#ifdef DYNAMIC_KEYMAP_ENABLE
-
-		case id_dynamic_keymap_get_keycode:
-		{
-			uint16_t keycode = dynamic_keymap_get_keycode( command_data[0], command_data[1], command_data[2] );
-			command_data[3] = keycode >> 8;
-			command_data[4] = keycode & 0xFF;
-			break;
-		}
-		case id_dynamic_keymap_set_keycode:
-		{
-			dynamic_keymap_set_keycode( command_data[0], command_data[1], command_data[2], ( command_data[3] << 8 ) | command_data[4] );
-			break;
-		}
-		case id_dynamic_keymap_reset:
-		{
-			dynamic_keymap_reset();
-			break;
-		}
-		case id_dynamic_keymap_macro_get_count:
-		{
-			command_data[0] = dynamic_keymap_macro_get_count();
-			break;
-		}
-		case id_dynamic_keymap_macro_get_buffer_size:
-		{
-			uint16_t size = dynamic_keymap_macro_get_buffer_size();
-			command_data[0] = size >> 8;
-			command_data[1] = size & 0xFF;
-			break;
-		}
-		case id_dynamic_keymap_macro_get_buffer:
-		{
-			uint16_t offset = ( command_data[0] << 8 ) | command_data[1];
-			uint16_t size = command_data[2]; // size <= 28
-			dynamic_keymap_macro_get_buffer( offset, size, &command_data[3] );
-			break;
-		}
-		case id_dynamic_keymap_macro_set_buffer:
-		{
-			uint16_t offset = ( command_data[0] << 8 ) | command_data[1];
-			uint16_t size = command_data[2]; // size <= 28
-			dynamic_keymap_macro_set_buffer( offset, size, &command_data[3] );
-			break;
-		}
-		case id_dynamic_keymap_macro_reset:
-		{
-			dynamic_keymap_macro_reset();
-			break;
-		}
-		case id_dynamic_keymap_get_layer_count:
-		{
-			command_data[0] = dynamic_keymap_get_layer_count();
-			break;
-		}
-		case id_dynamic_keymap_get_buffer:
-		{
-			uint16_t offset = ( command_data[0] << 8 ) | command_data[1];
-			uint16_t size = command_data[2]; // size <= 28
-			dynamic_keymap_get_buffer( offset, size, &command_data[3] );
-			break;
-		}
-		case id_dynamic_keymap_set_buffer:
-		{
-			uint16_t offset = ( command_data[0] << 8 ) | command_data[1];
-			uint16_t size = command_data[2]; // size <= 28
-			dynamic_keymap_set_buffer( offset, size, &command_data[3] );
-			break;
-		}
-#endif // DYNAMIC_KEYMAP_ENABLE
-		case id_eeprom_reset:
-		{
-			eeprom_reset();
-			break;
-		}
-		case id_bootloader_jump:
-		{
-			// Need to send data back before the jump
-			// Informs host that the command is handled
-			raw_hid_send( data, length );
-			// Give host time to read it
-			wait_ms(100);
-			bootloader_jump();
-			break;
-		}
-		default:
-		{
-			// Unhandled message.
-			*command_id = id_unhandled;
-			break;
-		}
-	}
-
-	// Return same buffer with values changed
-	raw_hid_send( data, length );
+    char *p = QMK_BUILDDATE; // e.g. "2019-11-05-11:29:54"
+    uint8_t magic0 = ( ( p[2] & 0x0F ) << 4 ) | ( p[3]  & 0x0F );
+    uint8_t magic1 = ( ( p[5] & 0x0F ) << 4 ) | ( p[6]  & 0x0F );
+    uint8_t magic2 = ( ( p[8] & 0x0F ) << 4 ) | ( p[9]  & 0x0F );
 
+    return (eeprom_read_byte( (void*)VIA_EEPROM_MAGIC_ADDR+0 ) == magic0 &&
+            eeprom_read_byte( (void*)VIA_EEPROM_MAGIC_ADDR+1 ) == magic1 &&
+            eeprom_read_byte( (void*)VIA_EEPROM_MAGIC_ADDR+2 ) == magic2 );
 }
 
-#endif
+// Sets VIA/keyboard level usage of EEPROM to valid/invalid
+// Keyboard level code (eg. via_init_kb()) should not call this
+void via_eeprom_set_valid(bool valid)
+{
+    char *p = QMK_BUILDDATE; // e.g. "2019-11-05-11:29:54"
+    uint8_t magic0 = ( ( p[2] & 0x0F ) << 4 ) | ( p[3]  & 0x0F );
+    uint8_t magic1 = ( ( p[5] & 0x0F ) << 4 ) | ( p[6]  & 0x0F );
+    uint8_t magic2 = ( ( p[8] & 0x0F ) << 4 ) | ( p[9]  & 0x0F );
+
+    eeprom_update_byte( (void*)VIA_EEPROM_MAGIC_ADDR+0, valid ? magic0 : 0xFF);
+    eeprom_update_byte( (void*)VIA_EEPROM_MAGIC_ADDR+1, valid ? magic1 : 0xFF);
+    eeprom_update_byte( (void*)VIA_EEPROM_MAGIC_ADDR+2, valid ? magic2 : 0xFF);
+}
+
+void via_eeprom_reset(void)
+{
+    // Set the VIA specific EEPROM state as invalid.
+    via_eeprom_set_valid(false);
+    // Set the TMK/QMK EEPROM state as invalid.
+    eeconfig_disable();
+}
+
+#endif // VIA_ENABLE

keyboards/cannonkeys/stm32f072/keyboard.h

@@ -19,5 +19,5 @@ void backlight_set(uint8_t level);
 bool is_breathing(void);
 void breathing_enable(void);
 void breathing_disable(void);
-void load_custom_config(void);
-void save_backlight_config_to_eeprom(void);
+void backlight_config_load(void);
+void backlight_config_save(void);

keyboards/cannonkeys/tmov2/config.h

@@ -58,25 +58,9 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define PIN_WS2812      15
 #define WS2812_SPI SPID2
 
-// EEPROM usage
-// TODO: refactor with new user EEPROM code (coming soon)
-#define EEPROM_MAGIC 0x451F
-#define EEPROM_MAGIC_ADDR 40
-// Bump this every time we change what we store
-// This will automatically reset the EEPROM with defaults
-// and avoid loading invalid data from the EEPROM
-#define EEPROM_VERSION 0x02
-#define EEPROM_VERSION_ADDR 42
-
-
-#define DYNAMIC_KEYMAP_LAYER_COUNT 4
-// Dynamic macro starts after dynamic keymaps (43+(4*4*15*2)) = (43+480) = 523
-// start + layer * rows * col * 2c
-#define DYNAMIC_KEYMAP_EEPROM_ADDR 43
-#define EEPROM_CUSTOM_BACKLIGHT 523
-#define DYNAMIC_KEYMAP_MACRO_EEPROM_ADDR 524
-#define DYNAMIC_KEYMAP_MACRO_EEPROM_SIZE 200
-#define DYNAMIC_KEYMAP_MACRO_COUNT 16
+// Backlight config starts after VIA's EEPROM usage,
+// dynamic keymaps start after this.
+#define VIA_EEPROM_CUSTOM_CONFIG_SIZE 1
 
 /*
  * Feature disable options

keyboards/ckeys/washington/rules.mk

@@ -9,7 +9,7 @@ MCU = atmega32u4
 #   QMK DFU      qmk-dfu
 #   ATmega32A    bootloadHID
 #   ATmega328P   USBasp
-BOOTLOADER = caterina
+BOOTLOADER = atmel-dfu
 
 # Build Options
 #   change yes to no to disable
@@ -31,4 +31,4 @@ AUDIO_ENABLE = no           # Audio output on port C6
 FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
 HD44780_ENABLE = no         # Enable support for HD44780 based LCDs
 ENCODER_ENABLE = yes        # Enable support for encoders
-OLED_DRIVER_ENABLE = yes    # Enable support for OLED displays
+OLED_DRIVER_ENABLE = yes    # Enable support for OLED displays

keyboards/coseyfannitutti/discipad/discipad.c

@@ -14,11 +14,3 @@
  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
 #include "discipad.h"
-
-
-void matrix_init_kb(void) {
-	// put your keyboard start-up code here
-	// runs once when the firmware starts up
-
-	matrix_init_user();
-}

keyboards/coseyfannitutti/discipline/discipline.c

@@ -14,11 +14,3 @@
  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
 #include "discipline.h"
-
-
-void matrix_init_kb(void) {
-	// put your keyboard start-up code here
-	// runs once when the firmware starts up
-
-	matrix_init_user();
-}

keyboards/crkbd/keymaps/curry/config.h

@@ -0,0 +1,31 @@
+#pragma once
+
+#define EE_HANDS
+#define USE_SERIAL_PD2
+
+#define OLED_DISABLE_TIMEOUT
+#define TAPPING_TERM_PER_KEY
+
+#ifdef RGBLIGHT_ENABLE
+#    undef RGBLED_NUM
+#    define RGBLED_NUM 27
+
+#    define RGBLIGHT_HUE_STEP 8
+#    define RGBLIGHT_SAT_STEP 8
+#    define RGBLIGHT_VAL_STEP 5
+#    define RGBLIGHT_LIMIT_VAL 120
+#endif
+
+#ifdef RGB_MATRIX_ENABLE
+#    define RGB_MATRIX_KEYPRESSES  // reacts to keypresses
+// #   define RGB_MATRIX_KEYRELEASES // reacts to keyreleases (instead of keypresses)
+// #   define RGB_DISABLE_AFTER_TIMEOUT 0 // number of ticks to wait until disabling effects
+#    define RGB_DISABLE_WHEN_USB_SUSPENDED true  // turn off effects when suspended
+// #   define RGB_MATRIX_LED_PROCESS_LIMIT (DRIVER_LED_TOTAL + 4) / 5 // limits the number of LEDs to process in an animation per task run (increases keyboard responsiveness)
+// #   define RGB_MATRIX_LED_FLUSH_LIMIT 16 // limits in milliseconds how frequently an animation will update the LEDs. 16 (16ms) is equivalent to limiting to 60fps (increases keyboard responsiveness)
+#    define RGB_MATRIX_MAXIMUM_BRIGHTNESS 120  // limits maximum brightness of LEDs to 200 out of 255. If not defined maximum brightness is set to 255
+#    define RGB_MATRIX_HUE_STEP 8
+#    define RGB_MATRIX_SAT_STEP 8
+#    define RGB_MATRIX_VAL_STEP 5
+#    define RGB_MATRIX_SPD_STEP 10
+#endif

keyboards/crkbd/keymaps/curry/keymap.c

@@ -0,0 +1,62 @@
+#include "curry.h"
+
+#define LAYOUT_crkbd_base( \
+        K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, \
+        K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, \
+        K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A  \
+    ) \
+    LAYOUT_wrapper( \
+        KC_GESC, K01, K02, K03, K04, K05,      K06, K07, K08, K09, K0A, KC_MINS, \
+        M_LCTL,  K11, K12, K13, K14, K15,      K16, K17, K18, K19, K1A, M_RALT,  \
+        OS_LSFT, K21, K22, K23, K24, K25,      K26, K27, K28, K29, K2A, OS_RSFT, \
+                KC_GRV, OS_LALT, SP_LWER,     ET_RAIS, KC_BSPC, OS_RGUI                                      \
+    )
+#define LAYOUT_crkbd_base_wrapper(...)       LAYOUT_crkbd_base(__VA_ARGS__)
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+    [_QWERTY] = LAYOUT_crkbd_base_wrapper(
+        _________________QWERTY_L1_________________, _________________QWERTY_R1_________________,
+        _________________QWERTY_L2_________________, _________________QWERTY_R2_________________,
+        _________________QWERTY_L3_________________, _________________QWERTY_R3_________________
+    ),
+
+    [_COLEMAK] = LAYOUT_crkbd_base_wrapper(
+        _________________COLEMAK_L1________________, _________________COLEMAK_R1________________,
+        _________________COLEMAK_L2________________, _________________COLEMAK_R2________________,
+        _________________COLEMAK_L3________________, _________________COLEMAK_R3________________
+    ),
+
+    [_DVORAK] = LAYOUT_crkbd_base_wrapper(
+        _________________DVORAK_L1_________________, _________________DVORAK_R1_________________,
+        _________________DVORAK_L2_________________, _________________DVORAK_R2_________________,
+        _________________DVORAK_L3_________________, _________________DVORAK_R3_________________
+    ),
+
+    [_MODS] = LAYOUT_wrapper(
+        _______, ___________________BLANK___________________,       ___________________BLANK___________________, _______,
+        _______, ___________________BLANK___________________,       ___________________BLANK___________________, _______,
+        KC_LSFT, ___________________BLANK___________________,       ___________________BLANK___________________, KC_RSFT,
+                                   _______, _______, _______,       _______, _______, _______
+    ),
+
+    [_LOWER] = LAYOUT_wrapper(
+        _______, _________________LOWER_L1__________________,       _________________LOWER_R1__________________, KC_PIPE,
+        KC_F11,  _________________LOWER_L2__________________,       _________________LOWER_R2__________________, KC_F12,
+        _______, _________________LOWER_L3__________________,       _________________LOWER_R3__________________, _______,
+                                   _______, _______, _______,       _______, _______, _______
+    ),
+
+    [_RAISE] = LAYOUT_wrapper( \
+        _______, _________________RAISE_L1__________________,       _________________RAISE_R1__________________, _______,
+        _______, _________________RAISE_L2__________________,       _________________RAISE_R2__________________, KC_BSLS,
+        _______, _________________RAISE_L3__________________,       _________________RAISE_R3__________________, _______,
+                                   _______, _______, _______,       _______, _______, _______
+    ),
+
+    [_ADJUST] = LAYOUT_wrapper( \
+        KC_MAKE, _________________ADJUST_L1_________________,       _________________ADJUST_R1_________________, KC_RESET,
+        VRSN,    _________________ADJUST_L2_________________,       _________________ADJUST_R2_________________, EEP_RST,
+        MG_NKRO, _________________ADJUST_L3_________________,       _________________ADJUST_R3_________________, RGB_IDL,
+                                   _______, _______, _______,       _______, TG_MODS, _______
+    )
+};

keyboards/crkbd/keymaps/curry/rules.mk

@@ -0,0 +1,23 @@
+# Build Options
+#   change to "no" to disable the options, or define them in the Makefile in
+#   the appropriate keymap folder that will get included automatically
+#
+BOOTMAGIC_ENABLE            = no  # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE             = no  # Mouse keys(+4700)
+EXTRAKEY_ENABLE             = yes # Audio control and System control(+450)
+CONSOLE_ENABLE              = no  # Console for debug(+400)
+COMMAND_ENABLE              = no  # Commands for debug and configuration
+NKRO_ENABLE                 = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+BACKLIGHT_ENABLE            = no  # Enable keyboard backlight functionality
+MIDI_ENABLE                 = no  # MIDI controls
+AUDIO_ENABLE                = no  # Audio output on port C6
+UNICODE_ENABLE              = no  # Unicode
+BLUETOOTH_ENABLE            = no  # Enable Bluetooth with the Adafruit EZ-Key HID
+RGBLIGHT_ENABLE             = no  # Enable WS2812 RGB underlight.
+SWAP_HANDS_ENABLE           = no  # Enable one-hand typing
+RGB_MATRIX_ENABLE           = WS2812
+TAP_DANCE_ENABLE            = yes      # Enable Tap Dance.
+OLED_DRIVER_ENABLE          = yes
+BOOTLOADER                  = atmel-dfu
+SLEEP_LED_ENABLE            = no    # Breathing sleep LED during USB suspend
+SPLIT_TRANSPORT             = mirror

keyboards/crkbd/keymaps/hvp/keymap.c

@@ -25,56 +25,56 @@ enum custom_keycodes {
 };
 
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-  [_QWERTY] = LAYOUT( \
+  [_QWERTY] = LAYOUT(
   //,-----------------------------------------.                ,-----------------------------------------.
-     KC_TAB,  KC_Q,  KC_W,  KC_E,  KC_R,  KC_T,                   KC_Y,  KC_U,  KC_I,  KC_O,  KC_P,KC_BSPC,\
+     LT(_ADJUST,KC_TAB),  KC_Q,  KC_W,  KC_E,  KC_R,  KC_T,                   KC_Y,  KC_U,  KC_I,  KC_O,  KC_P,KC_BSPC,
   //|------+------+------+------+------+------|                |------+------+------+------+------+------|
-    LT(_ADJUST, KC_ESC),  KC_A,  KC_S,  KC_D,  LT(_RAISE,KC_F),  MT(MOD_LCTL,KC_G), KC_H,  KC_J,  KC_K,  KC_L,TD(TD1),TD(TD2),\
+    LSFT_T(KC_ESC),  KC_A,  KC_S,  KC_D,  LT(3,KC_F), KC_G, KC_H,  KC_J,  KC_K,  KC_L,TD(TD1),TD(TD2),
   //|------+------+------+------+------+------|                |------+------+------+------+------+------|
-    KC_LCTL,  KC_Z,  KC_X,  KC_C,  KC_V,  KC_B,                   KC_N,  KC_M,KC_COMM,KC_DOT,TD(TD3),KC_SFTENT,\
+    KC_LCTL,  KC_Z,  KC_X,  KC_C,  KC_V,  KC_B,                   KC_N,  KC_M,KC_COMM,KC_DOT,TD(TD3),KC_SFTENT,
   //|------+------+------+------+------+------+------|  |------+------+------+------+------+------+------|
-                                KC_LGUI, LOWER,MT(MOD_LSFT, KC_SPC),   LT(_RAISE,KC_ENT), RAISE,KC_LALT \
+                                KC_LGUI, LT(1,KC_SPC),MT(MOD_LSFT, KC_SPC),   MT(MOD_LSFT,KC_ENT), LT(2,KC_SPC),KC_LALT 
                               //`--------------------'  `--------------------'
   ),
   
-  [_RAISE] = LAYOUT( \
+  [_RAISE] = LAYOUT( 
   //,-----------------------------------------.                ,-----------------------------------------.
-     KC_TAB,  KC_1,  KC_2,  KC_3,  KC_4,  KC_5,                   KC_6,  KC_7,  KC_8,  KC_9,  KC_0,KC_BSPC,\
+     KC_GRV,  KC_1,  KC_2,  KC_3,  KC_4,  KC_5,                   KC_6,  KC_7,  KC_8,  KC_9,  KC_0,KC_BSPC,
   //|------+------+------+------+------+------|                |------+------+------+------+------+------|
-    KC_ESC, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO,                KC_LEFT,KC_DOWN,KC_UP, KC_RIGHT,KC_NO, KC_DEL,\
+    KC_DEL, _______, _______, _______, _______, _______,                _______,KC_MINS, KC_EQL,  KC_LBRC, KC_RBRC, KC_BSLS,
   //|------+------+------+------+------+------|                |------+------+------+------+------+------|
-    KC_LCTL, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO,                  KC_HOME, KC_PGDN, KC_PGUP, KC_END, KC_NO, KC_NO,\
+    KC_LCTL, _______, _______, _______, _______, _______,                  _______, KC_UNDS, KC_PLUS,  KC_LCBR, KC_RCBR, KC_PIPE, 
   //|------+------+------+------+------+------+------|  |------+------+------+------+------+------+------|
-                                KC_LGUI, LOWER,MT(MOD_LSFT, KC_SPC),   LT(_RAISE,KC_ENT), RAISE,KC_LALT \
+                                _______, _______, _______, _______, _______, _______ 
                               //`--------------------'  `--------------------'
   ),
 
-  [_LOWER] = LAYOUT( \
+  [_LOWER] = LAYOUT(
   //,-----------------------------------------.                ,-----------------------------------------.
-     KC_TAB,KC_EXLM,KC_AT,KC_HASH,KC_DLR,KC_PERC,              KC_CIRC,KC_AMPR,KC_ASTR,KC_LPRN,KC_RPRN,KC_BSPC,\
+     KC_TAB,KC_EXLM,KC_AT,KC_HASH,KC_DLR,KC_PERC,              KC_CIRC,KC_AMPR,KC_ASTR,KC_LPRN,KC_RPRN,KC_BSPC,
   //|------+------+------+------+------+------|                |------+------+------+------+------+------|
-    KC_ESC, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO,                KC_MINS,KC_EQL,KC_LCBR,KC_RCBR,KC_PIPE,KC_GRV,\
+    KC_DEL, _______, _______, _______, _______, _______, _______,KC_UNDS, KC_PLUS,  KC_LCBR, KC_RCBR, KC_BSLS,
   //|------+------+------+------+------+------|                |------+------+------+------+------+------|
-    KC_LCTL, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO,                KC_UNDS,KC_PLUS,KC_LBRC,KC_RBRC,KC_BSLS,KC_TILD,\
+    KC_LCTL, _______, _______, _______, _______, _______, _______,  KC_MINS, KC_EQL,  KC_LBRC, KC_RBRC, KC_TILD, 
   //|------+------+------+------+------+------+------|  |------+------+------+------+------+------+------|
-                                KC_LGUI, LOWER,MT(MOD_LSFT, KC_SPC),   LT(_RAISE,KC_ENT), RAISE,KC_LALT \
+                                _______, _______, _______, _______, _______, _______ 
                               //`--------------------'  `--------------------'
   ),
 
-  [_ADJUST] = LAYOUT( \
+  [_ADJUST] = LAYOUT(
   //,-----------------------------------------.                ,-----------------------------------------.
-      KC_F1,KC_F2, KC_F3, KC_F4, KC_F5, KC_F6,                  KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12,\
+      _______,KC_F2, KC_F3, KC_F4, KC_F5, KC_F6,                  KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12,
   //|------+------+------+------+------+------|                |------+------+------+------+------+------|
-    KC_NO,KC_NO,KC_NO,KC_NO,KC_NO,KC_NO,                 KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO,\
+    KC_F1,_______,_______,D_NAVI,_______,_______,                 KC_LEFT, KC_DOWN, KC_UP, KC_RIGHT, _______, _______,
   //|------+------+------+------+------+------|                |------+------+------+------+------+------|
-    RESET,KC_NO,KC_NO,KC_NO,KC_NO,KC_NO,                 KC_MPLY, KC_MNXT, KC_LEFT, KC_DOWN, KC_UP, KC_RIGHT,\
+    RESET,KC_PSCR,_______,_______,_______,_______,                 KC_HOME, KC_PGDN, KC_PGUP, KC_END, _______, _______,
   //|------+------+------+------+------+------+------|  |------+------+------+------+------+------+------|
-                                KC_LGUI, LOWER,MT(MOD_LSFT, KC_SPC),   LT(_RAISE,KC_ENT), RAISE,KC_LALT \
+                                _______, KC_VOLD,KC_MPLY, KC_MNXT, KC_VOLU,_______ 
                               //`--------------------'  `--------------------'
   )
 };
 
-int RGB_current_mode;
+int RGB_current_mode; 
 
 // Setting ADJUST layer RGB back to default
 void update_tri_layer_RGB(uint8_t layer1, uint8_t layer2, uint8_t layer3) {

keyboards/crkbd/keymaps/hvp/readme.md

@@ -1,5 +1,10 @@
-Keymap to be used with Eurkey for easy access to swedish characters on first layer.
+Keyboard: Corne Keyboard (CRKBD)  
+Keys: A split keyboard with 3x6 vertically staggered keys and 3 thumb keys.  
+Layout: Swedish characters on main layer using tapdance. Built for eurkey keyboard layout.  
+Flash instructions: Flash using avrdude, will req the hvp user space to compile.
 
-Links:
+> make crkbd:hvp:avrdude
 
-- https://eurkey.steffen.bruentjen.eu/
+Links:  
+Github - https://github.com/qmk/qmk_firmware/tree/master/keyboards/crkbd  
+Eurkey layout - https://eurkey.steffen.bruentjen.eu/

keyboards/crkbd/keymaps/hvp/rules.mk

@@ -10,5 +10,5 @@ SRC +=  ./lib/glcdfont.c \
         # ./lib/timelogger.c \
 
 TAP_DANCE_ENABLE = yes
-EXTRAKEY_ENABLE = yes        # Audio control and System control(+450)
+EXTRAKEY_ENABLE = yes        # Audio control and System control
 # LOCAL_GLCDFONT = yes

keyboards/dp60/config.h

@@ -50,24 +50,6 @@
 #define DRIVER_2_LED_TOTAL 36
 #define DRIVER_LED_TOTAL (DRIVER_1_LED_TOTAL + DRIVER_2_LED_TOTAL)
 
-#if defined(RAW_ENABLE)
-//VIA
-#define DYNAMIC_KEYMAP_LAYER_COUNT 2
-// EEPROM usage
-
-// TODO: refactor with new user EEPROM code (coming soon)
-#define EEPROM_MAGIC 0x451F
-#define EEPROM_MAGIC_ADDR 34
-// Bump this every time we change what we store
-// This will automatically reset the EEPROM with defaults
-// and avoid loading invalid data from the EEPROM
-#define EEPROM_VERSION 0x08
-#define EEPROM_VERSION_ADDR 36
-
-// Dynamic keymap starts after EEPROM version
-#define DYNAMIC_KEYMAP_EEPROM_ADDR 37
-// Dynamic macro starts after dynamic keymaps (35+(4*10*6*2)) = (35+480)
-#define DYNAMIC_KEYMAP_MACRO_EEPROM_ADDR 637
-#define DYNAMIC_KEYMAP_MACRO_EEPROM_SIZE 391    // 1024-DYNAMIC_KEYMAP_MACRO_EEPROM_ADDR
-#define DYNAMIC_KEYMAP_MACRO_COUNT 16
+#if defined(VIA_ENABLE)
+#   define DYNAMIC_KEYMAP_LAYER_COUNT 2
 #endif

keyboards/dp60/keymaps/via/rules.mk

@@ -1,39 +1 @@
-# MCU name
-MCU = atmega32u4
-
-# Bootloader selection
-#   Teensy       halfkay
-#   Pro Micro    caterina
-#   Atmel DFU    atmel-dfu
-#   LUFA DFU     lufa-dfu
-#   QMK DFU      qmk-dfu
-#   ATmega32A    bootloadHID
-#   ATmega328P   USBasp
-BOOTLOADER = atmel-dfu
-
-# Build Options
-#   change yes to no to disable
-#
-BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration
-MOUSEKEY_ENABLE = no        # Mouse keys
-EXTRAKEY_ENABLE = yes # Audio control and System control
-CONSOLE_ENABLE = no         # Console for debug
-COMMAND_ENABLE = no         # Commands for debug and configuration
-# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
-SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
-# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-NKRO_ENABLE = no # USB Nkey Rollover
-BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality on B7 by default
-MIDI_ENABLE = no            # MIDI support
-UNICODE_ENABLE = no         # Unicode
-BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
-AUDIO_ENABLE = no           # Audio output on port C6
-FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
-RGBLIGHT_ENABLE = yes       # Use RGB bottom light
-RGB_MATRIX_ENABLE = yes     # Use RGB matrix
-
-RAW_ENABLE = yes
-DYNAMIC_KEYMAP_ENABLE = yes
-
-CUSTOM_MATRIX = yes
-SRC += matrix.c keyboards/wilba_tech/wt_main.c
+VIA_ENABLE = yes

keyboards/ergodox_ez/matrix.c

@@ -122,6 +122,9 @@ uint8_t matrix_scan(void) {
       } else {
         print("left side attached\n");
         ergodox_blink_all_leds();
+#ifdef RGB_MATRIX_ENABLE
+        rgb_matrix_init(); // re-init driver on reconnect
+#endif
       }
     }
   }

keyboards/ergoslab/config.h

@@ -0,0 +1,28 @@
+/*
+Copyright 2019 Tom Saleeba <ergoslab@techotom.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+#include "config_common.h"
+
+#define MOUSEKEY_INTERVAL           16
+#define MOUSEKEY_DELAY              0
+#define MOUSEKEY_TIME_TO_MAX        40
+#define MOUSEKEY_MAX_SPEED          7
+#define MOUSEKEY_WHEEL_MAX_SPEED    4
+#define MOUSEKEY_WHEEL_TIME_TO_MAX  255
+#define MOUSEKEY_WHEEL_DELAY        0

keyboards/ergoslab/ergoslab.c

@@ -0,0 +1 @@
+#include "ergoslab.h"

keyboards/ergoslab/ergoslab.h

@@ -0,0 +1,7 @@
+#pragma once
+
+#ifdef KEYBOARD_ergoslab_rev1
+    #include "rev1.h"
+#endif
+
+#include "quantum.h"

keyboards/ergoslab/info.json

@@ -0,0 +1,66 @@
+{
+  "keyboard_name": "ergoslab",
+  "url": "https://github.com/tomsaleeba/ergoslab",
+  "maintainer": "tomsaleeba",
+  "width": 13,
+  "height": 5.25,
+  "layouts": {
+    "LAYOUT_ergoslab": {
+      "key_count": 52,
+      "layout": [
+        {"label":"Q", "x":0, "y":0.625},
+        {"label":"W", "x":1, "y":0.125},
+        {"label":"E", "x":2, "y":0},
+        {"label":"R", "x":3, "y":0.125},
+        {"label":"T", "x":4, "y":0.25},
+        {"label":"Y", "x":8, "y":0.25},
+        {"label":"U", "x":9, "y":0.125},
+        {"label":"I", "x":10, "y":0},
+        {"label":"O", "x":11, "y":0.125},
+        {"label":"P", "x":12, "y":0.625},
+        {"label":"A", "x":0, "y":1.625},
+        {"label":"S", "x":1, "y":1.125},
+        {"label":"D", "x":2, "y":1},
+        {"label":"F", "x":3, "y":1.125},
+        {"label":"G", "x":4, "y":1.25},
+        {"label":"H", "x":8, "y":1.25},
+        {"label":"J", "x":9, "y":1.125},
+        {"label":"K", "x":10, "y":1},
+        {"label":"L", "x":11, "y":1.125},
+        {"label":";", "x":12, "y":1.625},
+        {"label":"Z", "x":0, "y":2.625},
+        {"label":"X", "x":1, "y":2.125},
+        {"label":"C", "x":2, "y":2},
+        {"label":"V", "x":3, "y":2.125},
+        {"label":"B", "x":4, "y":2.25},
+        {"label":"N", "x":8, "y":2.25},
+        {"label":"M", "x":9, "y":2.125},
+        {"label":",", "x":10, "y":2},
+        {"label":".", "x":11, "y":2.125},
+        {"label":"/", "x":12, "y":2.625},
+        {"label":"'", "x":0, "y":3.625},
+        {"label":"Alt", "x":1, "y":3.125},
+        {"label":"Del", "x":2, "y":3},
+        {"label":"Enter", "x":3, "y":3.125},
+        {"label":"Shift", "x":4, "y":3.25},
+        {"label":"Ctrl", "x":5, "y":3.25},
+        {"label":"Numb", "x":7, "y":3.25},
+        {"label":"Space", "x":8, "y":3.25},
+        {"label":"Left", "x":9, "y":3.125},
+        {"label":"Down", "x":10, "y":3},
+        {"label":"Up", "x":11, "y":3.125},
+        {"label":"Right", "x":12, "y":3.625},
+        {"label":"[", "x":1, "y":4.25},
+        {"label":"(", "x":2, "y":4.25},
+        {"label":"Esc", "x":3, "y":4.25},
+        {"label":"Media", "x":4, "y":4.25},
+        {"label":"GUI", "x":5, "y":4.25},
+        {"label":"Tab", "x":7, "y":4.25},
+        {"label":"Mouse", "x":8, "y":4.25},
+        {"label":"Bspc", "x":9, "y":4.25},
+        {"label":")", "x":10, "y":4.25},
+        {"label":"]", "x":11, "y":4.25}
+      ]
+    }
+  }
+}

keyboards/ergoslab/keymaps/default/config.h

@@ -0,0 +1,29 @@
+/*
+Copyright 2019 Tom Saleeba <ergoslab@techotom.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+/* Use I2C or Serial, not both */
+
+#define USE_SERIAL
+// #define USE_I2C
+
+/* Select hand configuration */
+
+// #define MASTER_LEFT
+#define MASTER_RIGHT
+// #define EE_HANDS

keyboards/ergoslab/keymaps/default/keymap.c

@@ -0,0 +1,73 @@
+#include QMK_KEYBOARD_H
+
+enum layer_names {
+    BASE,
+    MDIA,
+    NUMB,
+    MOUS
+};
+
+#ifdef RGBLIGHT_ENABLE
+#define ERGOSLAB_BRIGHTNESS 112
+#define HSV_ERGOSLAB_ORANGE 28, 255, 16
+#define HSV_ERGOSLAB_RED 0, 255, ERGOSLAB_BRIGHTNESS
+#define HSV_ERGOSLAB_GREEN 85, 255, ERGOSLAB_BRIGHTNESS
+#define HSV_ERGOSLAB_CYAN 128, 255, ERGOSLAB_BRIGHTNESS
+#endif
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+  [BASE] = LAYOUT_ergoslab(
+    KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,                           KC_Y,     KC_U,     KC_I,     KC_O,    KC_P,
+    KC_A,    KC_S,    KC_D,    KC_F,    KC_G,                           KC_H,     KC_J,     KC_K,     KC_L,    KC_SCLN,
+    KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,                           KC_N,     KC_M,     KC_COMM,  KC_DOT,  KC_SLSH,
+    KC_QUOT, KC_LALT, KC_DEL,  KC_ENT,  KC_LSFT, KC_LCTL,     MO(NUMB), KC_SPC,   KC_LEFT,  KC_DOWN,  KC_UP,   KC_RGHT,
+             KC_LBRC, KC_LPRN, KC_ESC,  MO(MDIA),KC_RGUI,     KC_TAB,   TG(MOUS), KC_BSPC,  KC_RPRN,  KC_RBRC
+  ),
+
+  [MDIA] = LAYOUT_ergoslab(
+    KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,                          KC_F6,    KC_F7,    KC_F8,    KC_F9,   KC_F10,
+    _______, _______, _______, _______, KC_F11,                         KC_F12,   KC_HOME,  KC_PGDN,  KC_PGUP, KC_END,
+    _______, _______, _______, _______, _______,                        RGB_TOG,  _______,  _______,  _______, KC_MUTE,
+    _______, RESET,   _______, _______, _______, _______,     _______,  _______,  _______,  KC_VOLD,  KC_VOLU, _______,
+             _______, _______, _______, _______, _______,     _______,  _______,  _______,  _______,  _______
+  ),
+
+  [NUMB] = LAYOUT_ergoslab(
+    KC_EXLM, KC_AT,   KC_HASH, KC_DLR,  KC_PERC,                        KC_CIRC,  KC_AMPR,  KC_ASTR,  KC_BSLS, KC_PIPE,
+    KC_1,    KC_2,    KC_3,    KC_4,    KC_5,                           KC_6,     KC_7,     KC_8,     KC_9,    KC_0,
+    KC_UNDS, KC_MINS, KC_PLUS, KC_EQL,  KC_GRV,                         KC_COLN,  KC_TILD,  _______,  _______, _______,
+    _______, _______, _______, _______, _______, _______,     _______,  _______,  KC_QUOT,  KC_DQT,   _______, _______,
+             _______, _______, _______, _______, _______,     _______,  _______,  _______,  _______,  _______
+  ),
+
+  [MOUS] = LAYOUT_ergoslab(
+    _______, _______, KC_MS_U, _______, _______,                        _______,  _______,  KC_WH_U,  _______, _______,
+    _______, KC_MS_L, KC_MS_D, KC_MS_R, _______,                        _______,  KC_BTN3,  KC_WH_D,  _______, _______,
+    _______, _______, _______, _______, _______,                        _______,  _______,  _______,  _______, _______,
+    _______, _______, _______, _______, KC_ACL0,  _______,     KC_BTN2, KC_BTN1,  _______,  _______,  _______, _______,
+             _______, _______, _______, _______,  _______,     _______, _______,  _______,  _______,  _______
+  ),
+};
+
+#ifdef RGBLIGHT_ENABLE
+layer_state_t layer_state_set_user(layer_state_t state) {
+  uint8_t layer = biton32(state);
+  switch (layer) {
+      case BASE:
+          rgblight_sethsv(HSV_ERGOSLAB_ORANGE);
+        break;
+      case MDIA:
+          rgblight_sethsv(HSV_ERGOSLAB_RED);
+        break;
+      case NUMB:
+          rgblight_sethsv(HSV_ERGOSLAB_GREEN);
+        break;
+      case MOUS:
+          rgblight_sethsv(HSV_ERGOSLAB_CYAN);
+        break;
+      default:
+        break;
+    }
+  return state;
+};
+#endif

keyboards/ergoslab/readme.md

@@ -0,0 +1,33 @@
+# ergoslab
+
+![ergoslab](https://raw.githubusercontent.com/tomsaleeba/ergoslab/master/ergoslab.jpg)
+
+
+A split ergo 5x6 keyboard with hotswap sockets and a heap of thumb keys designed
+by Tom Saleeba. [More info on the GitHub
+Repo](https://github.com/tomsaleeba/ergoslab).
+
+**Status** The ergoslab is currently being beta-tested.
+
+* Keyboard Maintainer: [Tom Saleeba](https://github.com/tomsaleeba)
+* Hardware Supported: Pro Micro (ATmega32U4)
+* Hardware Availability: gerbers are available from the [releases page on the
+GitHub repo](https://github.com/tomsaleeba/ergoslab/releases). Get them
+manufactured at your favourite PCB house. I used JLCPCB.
+
+
+Make example for this keyboard (after setting up your build environment):
+
+    make ergoslab:default
+
+Example of flashing this keyboard:
+
+    make ergoslab:default:flash
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools)
+and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide)
+for more information. Brand new to QMK? Start with our
+[Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
+
+A build guide for this keyboard can be found here: [Build
+Guide](https://github.com/tomsaleeba/ergoslab/blob/master/build-guide.md)

keyboards/ergoslab/rev1/config.h

@@ -0,0 +1,71 @@
+/*
+Copyright 2019 Tom Saleeba <ergoslab@techotom.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0xFEED
+#define PRODUCT_ID      0x5148
+#define DEVICE_VER      0x0100
+#define MANUFACTURER    tomsaleeba
+#define PRODUCT         Ergoslab Keyboard
+#define DESCRIPTION     Split 45 percent ergonomic keyboard
+
+/* key matrix size */
+// Rows are doubled-up
+#define MATRIX_ROWS 10
+#define MATRIX_COLS 6
+
+// wiring of each half
+#define MATRIX_ROW_PINS { D4, C6, D7, E6, B4 }
+#define MATRIX_COL_PINS { F4, F5, F6, F7, B1, B3 }
+
+/* COL2ROW or ROW2COL */
+#define DIODE_DIRECTION COL2ROW
+
+/* Set 0 if debouncing isn't needed */
+#define DEBOUNCE 5
+
+/* serial.c configuration for split keyboard */
+#define SOFT_SERIAL_PIN D2
+
+/* ws2812 RGB LED */
+#define RGB_DI_PIN D3
+
+#define RGBLED_NUM 2    // Number of LEDs
+// FIXME this following line should enable our layer status LEDs to work on both
+// sides without need to wire them into a chain. It doesn't though. Uncommenting
+// means the slave side of the keyboard stops working (and the LEDs don't work).
+// #define RGBLED_SPLIT {1,1}
+
+/*
+ * Feature disable options
+ *  These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+// #define NO_DEBUG
+
+/* disable print */
+// #define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+//#define NO_ACTION_MACRO
+//#define NO_ACTION_FUNCTION

keyboards/ergoslab/rev1/rev1.c

@@ -0,0 +1,18 @@
+#include "rev1.h"
+
+#ifdef SWAP_HANDS_ENABLE
+__attribute__ ((weak))
+const keypos_t hand_swap_config[MATRIX_ROWS][MATRIX_COLS] = {
+    {{0, 5}, {1, 5}, {2, 5}, {3, 5}, {4, 5}, {5, 5}},
+    {{0, 6}, {1, 6}, {2, 6}, {3, 6}, {4, 6}, {5, 6}},
+    {{0, 7}, {1, 7}, {2, 7}, {3, 7}, {4, 7}, {5, 7}},
+    {{0, 8}, {1, 8}, {2, 8}, {3, 8}, {4, 8}, {5, 8}},
+    {{0, 9}, {1, 9}, {2, 9}, {3, 9}, {4, 9}, {5, 9}},
+
+    {{0, 0}, {1, 0}, {2, 0}, {3, 0}, {4, 0}, {5, 0}},
+    {{0, 1}, {1, 1}, {2, 1}, {3, 1}, {4, 1}, {5, 1}},
+    {{0, 2}, {1, 2}, {2, 2}, {3, 2}, {4, 2}, {5, 2}},
+    {{0, 3}, {1, 3}, {2, 3}, {3, 3}, {4, 3}, {5, 3}},
+    {{0, 4}, {1, 4}, {2, 4}, {3, 4}, {4, 4}, {5, 4}},
+};
+#endif

keyboards/ergoslab/rev1/rev1.h

@@ -0,0 +1,24 @@
+#pragma once
+
+#include "ergoslab.h"
+
+#include "quantum.h"
+
+#define LAYOUT_ergoslab( \
+	L00, L01, L02, L03, L04,           R04, R03, R02, R01, R00, \
+	L10, L11, L12, L13, L14,           R14, R13, R12, R11, R10, \
+	L20, L21, L22, L23, L24,           R24, R23, R22, R21, R20, \
+	L30, L31, L32, L33, L34, L35, R35, R34, R33, R32, R31, R30, \
+	     L41, L42, L43, L44, L45, R45, R44, R43, R42, R41       \
+) { \
+  { L00,   L01,   L02, L03, L04,   KC_NO }, \
+	{ L10,   L11,   L12, L13, L14,   KC_NO }, \
+	{ L20,   L21,   L22, L23, L24,   KC_NO }, \
+	{ L30,   L31,   L32, L33, L34,   L35   }, \
+	{ KC_NO, L41,   L42, L43, L44,   L45   }, \
+	{ R00,   R01,   R02, R03, R04,   KC_NO }, \
+	{ R10,   R11,   R12, R13, R14,   KC_NO }, \
+	{ R20,   R21,   R22, R23, R24,   KC_NO }, \
+	{ R30,   R31,   R32, R33, R34,   R35   }, \
+	{ KC_NO, R41,   R42, R43, R44,   R45   }  \
+ }

keyboards/ergoslab/rules.mk

@@ -0,0 +1,35 @@
+# MCU name
+MCU = atmega32u4
+
+# Bootloader selection
+#   Teensy       halfkay
+#   Pro Micro    caterina
+#   Atmel DFU    atmel-dfu
+#   LUFA DFU     lufa-dfu
+#   QMK DFU      qmk-dfu
+#   ATmega32A    bootloadHID
+#   ATmega328P   USBasp
+BOOTLOADER = caterina
+
+# Build Options
+#   change to "no" to disable the options, or define them in the Makefile in
+#   the appropriate keymap folder that will get included automatically
+#
+BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration
+MOUSEKEY_ENABLE = yes       # Mouse keys
+EXTRAKEY_ENABLE = yes       # Audio control and System control
+CONSOLE_ENABLE = no         # Console for debug
+COMMAND_ENABLE = yes        # Commands for debug and configuration
+NKRO_ENABLE = no            # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
+MIDI_ENABLE = no            # MIDI controls
+AUDIO_ENABLE = no           # Audio output on port C6
+UNICODE_ENABLE = no         # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+RGBLIGHT_ENABLE = yes       # Enable WS2812 RGB underlight.
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
+
+SPLIT_KEYBOARD = yes
+
+DEFAULT_FOLDER = ergoslab/rev1

keyboards/exclusive/e6v2/le_bmc/keymaps/default/keymap.c

@@ -60,15 +60,3 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) {
   }
   return true;
 }
-
-void matrix_init_user(void) {
-
-}
-
-void matrix_scan_user(void) {
-
-}
-
-void led_set_user(uint8_t usb_led) {
-
-}

keyboards/exclusive/e6v2/oe_bmc/keymaps/default/keymap.c

@@ -60,15 +60,3 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) {
   }
   return true;
 }
-
-void matrix_init_user(void) {
-
-}
-
-void matrix_scan_user(void) {
-
-}
-
-void led_set_user(uint8_t usb_led) {
-
-}

keyboards/foxlab/leaf60/hotswap/keymaps/crd/keymap.c

@@ -0,0 +1,33 @@
+#include QMK_KEYBOARD_H
+
+enum keyboard_layers {
+  _BL = 0, // Base Layer
+  _FL,     // Function Layer
+  _CL      // Control Layer
+};
+
+#define KC_CTES CTL_T(KC_ESC)
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+	[_BL] = LAYOUT_60_tsangan_hhkb(
+    KC_GESC, KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_BSLS, KC_GRV,
+    KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC, KC_BSPC,
+    KC_CTES, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT,          KC_ENT,
+    KC_LSFT,          KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_RSFT, MO(_FL),
+    KC_LCTL, XXXXXXX, KC_LGUI,                            KC_SPC,                                      KC_RALT, XXXXXXX, TO(_CL)
+  ),
+	[_FL] = LAYOUT_60_tsangan_hhkb(
+    _______, KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_INS, KC_DEL,
+    _______, _______, _______, EEP_RST, RESET,   _______, _______, _______, KC_PSCR, KC_SLCK, KC_PAUS, KC_UP,   _______, _______,
+    _______, KC_VOLD, KC_VOLU, KC_MUTE, _______, _______, KC_PAST, KC_PSLS, KC_HOME, KC_PGUP, KC_LEFT, KC_RGHT,          _______,
+    _______,          _______, _______, _______, _______, _______, KC_PPLS, KC_PMNS, KC_END,  KC_PGDN, KC_DOWN, _______, _______,
+    _______, _______, _______,                            _______,                                     _______, _______, _______
+  ),
+  [_CL] = LAYOUT_60_tsangan_hhkb(
+    XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,
+    XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, BL_ON,   XXXXXXX, XXXXXXX,
+    XXXXXXX, BL_DEC,  BL_INC,  BL_TOGG, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, BL_BRTG, BL_STEP,          XXXXXXX,
+    XXXXXXX,          XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, BL_OFF,  XXXXXXX, XXXXXXX,
+    XXXXXXX, XXXXXXX, XXXXXXX,                            XXXXXXX,                                     XXXXXXX, XXXXXXX, TO(_BL)
+  )
+};

keyboards/ft/mars80/keymaps/default/keymap.c

@@ -61,15 +61,3 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) {
   }
   return true;
 }
-
-void matrix_init_user(void) {
-
-}
-
-void matrix_scan_user(void) {
-
-}
-
-void led_set_user(uint8_t usb_led) {
-
-}

keyboards/handwired/aranck/aranck.h

@@ -25,7 +25,7 @@
  * The second converts the arguments into a two-dimensional array which
  * represents the switch matrix.
  */
-#define LAYOUT_aranck_mit(\
+#define LAYOUT_planck_mit(\
     k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, \
     k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, \
     k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, \

keyboards/handwired/aranck/config.h

@@ -24,7 +24,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define PRODUCT_ID 0x0000
 #define DEVICE_VER 0x0001
 #define MANUFACTURER Ardakilic
-#define PRODUCT ARANCK
+#define PRODUCT Aranck
 #define DESCRIPTION A handwired 40% ortholinear keyboard
 
 /* key matrix size */

keyboards/handwired/aranck/info.json

@@ -6,7 +6,7 @@
   "width": 12,
   "height": 4,
   "layouts": {
-    "LAYOUT_aranck_mit": {
+    "LAYOUT_planck_mit": {
       "key_count": 47,
       "layout": [
         { "x": 0, "y": 0 },

keyboards/handwired/aranck/keymaps/default/keymap.c

@@ -42,10 +42,10 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
  * | PWR  | Ctrl | Alt  | GUI  |Lower |    Space    |Raise | Left | Down |  Up  |Right |
  * `-----------------------------------------------------------------------------------'
  */
-[_QWERTY] = LAYOUT_aranck_mit(
+[_QWERTY] = LAYOUT_planck_mit(
     KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_BSPC,
     LT(_NUMPAD, KC_ESC),  KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT,
-    LSFT_T(KC_CAPS), KC_Z,   KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_SFTENT /*KC_ENT*/,
+    LSFT_T(KC_CAPS), KC_Z,   KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_SFTENT,
     LT(_SODA, KC_POWER), KC_LCTL, KC_LALT, KC_LGUI, MO(_LOWER), LT(_SPACE, KC_SPC), MO(_RAISE),   KC_LEFT, KC_DOWN, KC_UP,   KC_RGHT
 ),
 
@@ -60,7 +60,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
  * |      |      |      |      |      |             |      | Next | Vol- | Vol+ | Play |
  * `-----------------------------------------------------------------------------------'
  */
-[_LOWER] = LAYOUT_aranck_mit(
+[_LOWER] = LAYOUT_planck_mit(
     KC_TILD, KC_EXLM, KC_AT,   KC_HASH, KC_DLR,  KC_PERC, KC_CIRC, KC_AMPR,    KC_ASTR,    KC_LPRN, KC_RPRN, KC_BSPC,
     KC_DEL,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_UNDS,    KC_PLUS,    KC_LCBR, KC_RCBR, KC_PIPE,
     _______, KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  S(KC_NUHS), S(KC_NUBS), KC_HOME, KC_END,  _______,
@@ -79,7 +79,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
  * |      |      |      |      |      |             |      | Next | Vol- | Vol+ | Play |
  * `-----------------------------------------------------------------------------------'
  */
-[_RAISE] = LAYOUT_aranck_mit(
+[_RAISE] = LAYOUT_planck_mit(
     KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_BSPC,
     KC_DEL,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_MINS, KC_EQL,  KC_LBRC, KC_RBRC, KC_BSLS,
     _______, KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_NUHS, KC_NUBS, KC_PGUP, KC_PGDN, _______,
@@ -89,18 +89,18 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 /* Soda Layer
  * Keys that I mostly use when while chilling or taking a break :)
  * ,-----------------------------------------------------------------------------------.
- * |      |      |      |      |      |      |      |      |      |      |      |      |
+ * |      |      |      |      |      |      |      |      |  Up  |      |      |      |
  * |------+------+------+------+------+------+------+------+------+------+------+------|
- * |      |      |      |      |      |      |      |      |      |      |      | Mute |
+ * |      |      |      |      |      |      |      | Left | Down |Right |      | Mute |
  * |------+------+------+------+------+------+------+------+------+------+------+------|
  * |      |      |      |      |      |      |      |      | Next | Vol- | Vol+ | Play |
  * |------+------+------+------+------+------+------+------+------+------+------+------|
  * |      |      |      |      |      |             |      |      |      |Brght▼|Brght▲|
  * `-----------------------------------------------------------------------------------'
  */
-[_SODA] = LAYOUT_aranck_mit(
-    _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
-    _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_MUTE,
+[_SODA] = LAYOUT_planck_mit(
+    _______, _______, _______, _______, _______, _______, _______, _______, KC_UP, _______, _______, _______,
+    _______, _______, _______, _______, _______, _______, _______, KC_LEFT, KC_DOWN, KC_RGHT, _______, KC_MUTE,
     _______, _______, _______, _______, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY,
     _______, _______, _______, _______, _______,      _______,     _______, _______, _______, KC_BRMD, KC_BRMU
 ),
@@ -116,7 +116,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
  * |      |      |      |      |      |             |      |      |      |Brght▼|Brght▲|
  * `-----------------------------------------------------------------------------------'
  */
-[_SPACE] = LAYOUT_aranck_mit(
+[_SPACE] = LAYOUT_planck_mit(
     _______, LGUI(KC_1), LGUI(KC_2), LGUI(KC_3), LGUI(KC_4), LGUI(KC_5), LGUI(KC_6), LGUI(KC_7), LGUI(KC_8),  LGUI(KC_9), LGUI(KC_0), LOCKSCREEN,
     _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_UP,  _______, _______,
     _______, _______, _______, _______, _______, _______, _______, _______, KC_LEFT, KC_DOWN, KC_RGHT, _______,
@@ -129,15 +129,15 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
  * |------+------+------+------+------+------+------+------+------+------+------+------|
  * |      |      |      |      |      |      | Enter|   4  |   5  |   6  |   +  |   *  |
  * |------+------+------+------+------+------+------+------+------+------+------+------|
- * |      |      |      |      |      |      |      |   1  |   2  |   3  |   +  |   /  |
+ * |      |      |      |      |      |      | Enter|   1  |   2  |   3  |   +  |   /  |
  * |------+------+------+------+------+------+------+------+------+------+------+------|
  * |      |      |      |      |      |             |   0  |   0  |   .  |   ,  |   =  |
  * `-----------------------------------------------------------------------------------'
  */
-[_NUMPAD] = LAYOUT_aranck_mit(
+[_NUMPAD] = LAYOUT_planck_mit(
     _______, _______, _______, _______, _______, _______, _______, KC_P7, KC_P8, KC_P9, KC_PMNS, KC_BSPC,
     _______, _______, _______, _______, _______, _______, KC_PENT, KC_P4, KC_P5, KC_P6, KC_PPLS, KC_PAST,
-    _______, _______, _______, _______, _______, _______, _______, KC_P1, KC_P2, KC_P3, KC_PPLS, KC_PSLS,
+    _______, _______, _______, _______, _______, _______, KC_PENT, KC_P1, KC_P2, KC_P3, KC_PPLS, KC_PSLS,
     _______, _______, _______, _______, _______,      _______,     KC_P0, KC_P0, KC_PDOT, KC_PCMM, KC_PEQL
 ),
 
@@ -153,7 +153,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
  * |      |      |      |      |      |             |      |      |      |      |      |
  * `-----------------------------------------------------------------------------------'
  */
-[_ADJUST] = LAYOUT_aranck_mit(
+[_ADJUST] = LAYOUT_planck_mit(
     _______, RESET,   EEP_RST, _______, _______, _______, _______, _______, _______,  _______, _______,  KC_DEL,
     _______, _______, MU_MOD,  AU_ON, AU_OFF, _______, _______, _______,  _______,  _______,  _______,  _______,
     _______, MUV_DE,  MUV_IN,  MU_ON,   MU_OFF, _______, _______, _______, _______, _______,  _______,  _______,
@@ -166,13 +166,3 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 layer_state_t layer_state_set_user(layer_state_t state) {
   return update_tri_layer_state(state, _LOWER, _RAISE, _ADJUST);
 }
-
-//bool process_record_user(uint16_t keycode, keyrecord_t *record) {
-//  return true;
-//}
-
-void matrix_init_user(void) {}
-
-void matrix_scan_user(void) {}
-
-void led_set_user(uint8_t usb_led) {}

keyboards/handwired/aranck/keymaps/turkishish/config.h

@@ -19,4 +19,6 @@
 // place overrides here
 
 #define RETRO_TAPPING
-#define PERMISSIVE_HOLD
+#define PERMISSIVE_HOLD
+#define IGNORE_MOD_TAP_INTERRUPT
+#define TAPPING_FORCE_HOLD

keyboards/handwired/aranck/keymaps/turkishish/keymap.c

@@ -43,6 +43,7 @@ enum aranck_layers {
 #define VERTICAL_PIPE RALT(KC_EQL)
 #define BACKTICK RALT(KC_BSLS)
 #define TILDE RALT(KC_RBRC)
+#define NUMBER_SIGN RALT(KC_3)
 #define LOCKSCREEN LCTL(LSFT(KC_POWER)) // Screen Lock shortcut for OSX
 
 /* 
@@ -93,10 +94,10 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
  * |Sda|<>| Ctrl | Alt  |  OS  |Lowr|,|    Space*   |Rise|"| Left | Down |  Up  |Right |
  * `-----------------------------------------------------------------------------------'
  */
-[_QWERTY] = LAYOUT_aranck_mit(
+[_QWERTY] = LAYOUT_planck_mit(
     KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_BSPC,
     LT(_NUMPAD, KC_ESC),  KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT,
-    LSFT_T(KC_CAPS), KC_Z,  KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_SFTENT /*KC_ENT*/,
+    LSFT_T(KC_CAPS), KC_Z,  KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_SFTENT,
     LT(_SODA, KC_GRV), KC_LCTL, KC_LALT, KC_LGUI, LT(_LOWER, KC_BSLS), LT(_SPACE, KC_SPC),  LT(_RAISE, KC_NONUS_BSLASH), KC_LEFT, KC_DOWN, KC_UP, KC_RGHT
 ),
 
@@ -106,15 +107,15 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
  * |------+------+------+------+------+------+------+------+------+------+------+------|
  * | Del  |  F1  |  F2  |  F3  |  F4  |  F5  |  F6  |   ?  |   _  |  Ğ   |  Ü   |  -   |
  * |------+------+------+------+------+------+------+------+------+------+------+------|
- * |      |  F7  |  F8  |  F9  |  F10 |  F11 |  F12 | "$"  | "{"  | "}"  |  ,   | ">"  |
+ * |      |  F7  |  F8  |  F9  |  F10 |  F11 |  F12 |  "$" |  "{" |  "}" |  <   |  ">" |
  * |------+------+------+------+------+------+------+------+------+------+------+------|
- * |      |      |      |      |      |             |      | "["  | "]"  |  '   |  "   |
+ * |      |      |      |      |      |             |      |  "[" |  "]" |  '   |   "  |
  * `-----------------------------------------------------------------------------------'
  */
-[_LOWER] = LAYOUT_aranck_mit(
+[_LOWER] = LAYOUT_planck_mit(
     KC_TILD, KC_EXLM, KC_AT,   KC_HASH, KC_DLR,  KC_PERC, KC_CIRC, KC_AMPR,    KC_ASTR,    KC_LPRN, KC_RPRN, KC_BSPC,
     KC_DEL,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_UNDS,    KC_PLUS,    KC_LBRC, KC_RBRC, KC_EQL,
-    _______, KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  DOLLAR_SIGN, CURLY_OPEN, CURLY_CLOSE, KC_BSLS, LSFT(KC_GRV),
+    _______, KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  DOLLAR_SIGN, CURLY_OPEN, CURLY_CLOSE, KC_GRV, LSFT(KC_GRV),
     _______, _______, _______, _______, _______,      _______,      _______,   SQUARE_OPEN, SQUARE_CLOSE, LSFT(KC_2), KC_NONUS_BSLASH
 ),
 
@@ -125,15 +126,15 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
  * |------+------+------+------+------+------+------+------+------+------+------+------|
  * |  Del |  F1  |  F2  |  F3  |  F4  |  F5  |  F6  |   *  |   -  | "\"  | "|"  |  ,   |
  * |------+------+------+------+------+------+------+------+------+------+------+------|
- * |      |  F7  |  F8  |  F9  |  F10 |  F11 |  F12 |   ,  |   "  | "~"  | "`"  |  <>| |
+ * |      |  F7  |  F8  |  F9  |  F10 |  F11 |  F12 |   #  |   "  | "~"  | "`"  |  <>| |
  * |------+------+------+------+------+------+------+------+------+------+------+------|
  * |      |      |      |      |      |             |      | Next | Vol- | Vol+ | Play |
  * `-----------------------------------------------------------------------------------'
  */
-[_RAISE] = LAYOUT_aranck_mit(
+[_RAISE] = LAYOUT_planck_mit(
     KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_BSPC,
     KC_DEL,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_MINS, KC_EQL,  BACKSLASH, VERTICAL_PIPE, KC_BSLS,
-    _______, KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_NUHS, KC_NUBS, TILDE, BACKTICK, KC_GRV,
+    _______, KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  NUMBER_SIGN, KC_NUBS, TILDE, BACKTICK, KC_GRV,
     _______, _______, _______, _______, _______,      _______,     _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY
 ),
 
@@ -148,7 +149,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
  * |      |      |      |      |      |             |      |      |      |Brght▼|Brght▲|
  * `-----------------------------------------------------------------------------------'
  */
-[_SODA] = LAYOUT_aranck_mit(
+[_SODA] = LAYOUT_planck_mit(
     _______, _______, _______, _______, _______, _______, _______, _______, KC_UP, _______, _______, _______,
     _______, _______, _______, _______, _______, _______, _______, KC_LEFT, KC_DOWN, KC_RGHT, _______, KC_MUTE,
     _______, _______, _______, _______, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY,
@@ -166,7 +167,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
  * |      |      |      |      |      |             |      |      |      |Brght▼|Brght▲|
  * `-----------------------------------------------------------------------------------'
  */
-[_SPACE] = LAYOUT_aranck_mit(
+[_SPACE] = LAYOUT_planck_mit(
     _______, LGUI(KC_1), LGUI(KC_2), LGUI(KC_3), LGUI(KC_4), LGUI(KC_5), LGUI(KC_6), LGUI(KC_7), LGUI(KC_8),  LGUI(KC_9), LGUI(KC_0), LOCKSCREEN,
     _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_UP,  _______, _______,
     _______, _______, _______, _______, _______, _______, _______, _______, KC_LEFT, KC_DOWN, KC_RGHT, _______,
@@ -181,15 +182,15 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
  * |------+------+------+------+------+------+------+------+------+------+------+------|
  * |      |      |      |      |      |      | Enter|   4  |   5  |   6  |   +  |   *  |
  * |------+------+------+------+------+------+------+------+------+------+------+------|
- * |      |      |      |      |      |      |      |   1  |   2  |   3  |   +  |   /  |
+ * |      |      |      |      |      |      | Enter|   1  |   2  |   3  |   +  |   /  |
  * |------+------+------+------+------+------+------+------+------+------+------+------|
  * |      |      |      |      |      |             |   0  |   0  |   .  |   ,  |   =  |
  * `-----------------------------------------------------------------------------------'
  */
-[_NUMPAD] = LAYOUT_aranck_mit(
+[_NUMPAD] = LAYOUT_planck_mit(
     _______, _______, _______, _______, _______, _______, _______, KC_P7, KC_P8, KC_P9, KC_PMNS, KC_BSPC,
     _______, _______, _______, _______, _______, _______, KC_PENT, KC_P4, KC_P5, KC_P6, KC_PPLS, KC_PAST,
-    _______, _______, _______, _______, _______, _______, _______, KC_P1, KC_P2, KC_P3, KC_PPLS, KC_PSLS,
+    _______, _______, _______, _______, _______, _______, KC_PENT, KC_P1, KC_P2, KC_P3, KC_PPLS, KC_PSLS,
     _______, _______, _______, _______, _______,      _______,     KC_P0, KC_P0, KC_SLSH, KC_PDOT, KC_PEQL
 ),
 
@@ -204,7 +205,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
  * |      |      |      |      |      |             |      |      |      |      |      |
  * `-----------------------------------------------------------------------------------'
  */
-[_ADJUST] = LAYOUT_aranck_mit(
+[_ADJUST] = LAYOUT_planck_mit(
     _______, RESET, EEP_RST, _______, _______, _______, _______, _______, _______, _______, _______, KC_DEL,
     _______, _______, MU_MOD,  AU_ON, AU_OFF, _______, _______, _______,  _______,  _______,  _______,  _______,
     _______, MUV_DE,  MUV_IN,  MU_ON,   MU_OFF, _______, _______, _______, _______, _______,  _______,  _______,
@@ -217,9 +218,3 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 layer_state_t layer_state_set_user(layer_state_t state) {
   return update_tri_layer_state(state, _LOWER, _RAISE, _ADJUST);
 }
-
-void matrix_init_user(void) {}
-
-void matrix_scan_user(void) {}
-
-void led_set_user(uint8_t usb_led) {}

keyboards/handwired/aranck/keymaps/turkishish/readme.md

@@ -1 +1,7 @@
 # The Turkishish keymap for Aranck
+
+This layout is optimized for my use cases with Turkish OS layout.
+
+You can flash the "turkishish" layout like:
+
+	make handwired/aranck:turkishish:flash

keyboards/handwired/aranck/readme.md

@@ -8,15 +8,11 @@ A handwired 40% ortholinear keyboard.
 
 The story: https://imgur.com/a/4QI7ifJ
 
-Keyboard Maintainer: [Arda Kilicdagi](https://github.com/ardakilic)  
-Hardware Supported: Pro Micro
+* Keyboard Maintainer: [Arda Kilicdagi](https://github.com/ardakilic)
+* Hardware Supported: Pro Micro
 
 Make example for this keyboard (after setting up your build environment):
 
-    make handwired/aranck:default:flash
+    make handwired/aranck:default
 
-You can flash the "turkishish" layout (which I'm currently using) like:
-
-	make handwired/aranck:turkishish:flash
-
-See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

keyboards/handwired/aranck/rules.mk

@@ -14,10 +14,10 @@ BOOTLOADER = caterina
 # Build Options
 #   change yes to no to disable
 #
-BOOTMAGIC_ENABLE = no      # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE = no       # Mouse keys(+4700)
-EXTRAKEY_ENABLE = yes      # Audio control and System control(+450)
-CONSOLE_ENABLE = no        # Console for debug(+400)
+BOOTMAGIC_ENABLE = no      # Virtual DIP switch configuration
+MOUSEKEY_ENABLE = no       # Mouse keys
+EXTRAKEY_ENABLE = yes      # Audio control and System control
+CONSOLE_ENABLE = no        # Console for debug
 COMMAND_ENABLE = no        # Commands for debug and configuration
 # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
 SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
@@ -25,9 +25,11 @@ SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
 NKRO_ENABLE = no            # USB Nkey Rollover
 BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
 RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
-MIDI_ENABLE = no            # MIDI support (+2400 to 4200, depending on config)
+MIDI_ENABLE = no            # MIDI support
 UNICODE_ENABLE = no         # Unicode
 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
 AUDIO_ENABLE = yes          # Audio output on port C6
 FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
-HD44780_ENABLE = no 		# Enable support for HD44780 based LCDs (+400)
+HD44780_ENABLE = no         # Enable support for HD44780 based LCDs
+
+LAYOUTS = planck_mit

keyboards/handwired/p65rgb/config.h

@@ -0,0 +1,64 @@
+/*
+Copyright 2019 marhalloweenvt
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0xFEED
+#define PRODUCT_ID      0x75B4
+#define DEVICE_VER      0x0001
+#define MANUFACTURER    marhalloweenvt
+#define PRODUCT         p65rgb
+#define DESCRIPTION     Replacement PCB for e6.5
+
+/* key matrix size */
+#define MATRIX_ROWS 5
+#define MATRIX_COLS 17
+
+/* key matrix pins */
+#define MATRIX_ROW_PINS { C7, C6, B6, B5, D5 }
+#define MATRIX_COL_PINS { E6, F0, F1, F4, F5, F6, F7, B0, B1, B2, B3, B7, D0, D1, D2, D3, D7 }
+#define UNUSED_PINS
+
+/* COL2ROW, ROW2COL*/
+#define DIODE_DIRECTION COL2ROW
+
+#define RGB_DI_PIN B4
+#define RGB_DISABLE_AFTER_TIMEOUT 0 // number of ticks to wait until disabling effects
+#define RGB_DISABLE_WHEN_USB_SUSPENDED true // turn off effects when suspended
+#define RGB_MATRIX_KEYPRESSES
+#define RGB_MATRIX_FRAMEBUFFER_EFFECTS
+#define RGB_MATRIX_LED_PROCESS_LIMIT 4
+#define RGB_MATRIX_LED_FLUSH_LIMIT 26
+#define DRIVER_LED_TOTAL 83
+#define RGBLIGHT_LIMIT_VAL 180
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCE 5
+
+/* define if matrix has ghost (lacks anti-ghosting diodes) */
+//#define MATRIX_HAS_GHOST
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+#define QMK_ESC_OUTPUT E6 // usually COL
+#define QMK_ESC_INPUT C7 // usually ROW

keyboards/handwired/p65rgb/info.json

@@ -0,0 +1,82 @@
+{
+    "keyboard_name": "p65rgb",
+    "url": "",
+    "maintainer": "marhalloweenvt",
+    "width": 16,
+    "height": 5,
+    "layouts": {
+        "LAYOUT": {
+            "layout": [
+                {"label":"Esc", "x":0, "y":0},
+                {"label":"!", "x":1, "y":0},
+                {"label":"@", "x":2, "y":0},
+                {"label":"#", "x":3, "y":0},
+                {"label":"$", "x":4, "y":0},
+                {"label":"%", "x":5, "y":0},
+                {"label":"^", "x":6, "y":0},
+                {"label":"&", "x":7, "y":0},
+                {"label":"*", "x":8, "y":0},
+                {"label":"(", "x":9, "y":0},
+                {"label":")", "x":10, "y":0},
+                {"label":"_", "x":11, "y":0},
+                {"label":"+", "x":12, "y":0},
+                {"label":"~", "x":13, "y":0},
+                {"label":"|", "x":14, "y":0},
+                {"label":"Delete", "x":15, "y":0},
+                {"label":"Tab", "x":0, "y":1, "w":1.5},
+                {"label":"Q", "x":1.5, "y":1},
+                {"label":"W", "x":2.5, "y":1},
+                {"label":"E", "x":3.5, "y":1},
+                {"label":"R", "x":4.5, "y":1},
+                {"label":"T", "x":5.5, "y":1},
+                {"label":"Y", "x":6.5, "y":1},
+                {"label":"U", "x":7.5, "y":1},
+                {"label":"I", "x":8.5, "y":1},
+                {"label":"O", "x":9.5, "y":1},
+                {"label":"P", "x":10.5, "y":1},
+                {"label":"{", "x":11.5, "y":1},
+                {"label":"}", "x":12.5, "y":1},
+                {"label":"Backspace", "x":13.5, "y":1, "w":1.5},
+                {"label":"PgUp", "x":15, "y":1},
+                {"label":"Caps Lock", "x":0, "y":2, "w":1.75},
+                {"label":"A", "x":1.75, "y":2},
+                {"label":"S", "x":2.75, "y":2},
+                {"label":"D", "x":3.75, "y":2},
+                {"label":"F", "x":4.75, "y":2},
+                {"label":"G", "x":5.75, "y":2},
+                {"label":"H", "x":6.75, "y":2},
+                {"label":"J", "x":7.75, "y":2},
+                {"label":"K", "x":8.75, "y":2},
+                {"label":"L", "x":9.75, "y":2},
+                {"label":":", "x":10.75, "y":2},
+                {"label":"\"", "x":11.75, "y":2},
+                {"label":"Enter", "x":12.75, "y":2},
+                {"label":"Enter", "x":13.75, "y":2, "w":1.25},
+                {"label":"PgDn", "x":15, "y":2},
+                {"label":"Shift", "x":0, "y":3, "w":2.25},
+                {"label":"Z", "x":2.25, "y":3},
+                {"label":"X", "x":3.25, "y":3},
+                {"label":"C", "x":4.25, "y":3},
+                {"label":"V", "x":5.25, "y":3},
+                {"label":"B", "x":6.25, "y":3},
+                {"label":"N", "x":7.25, "y":3},
+                {"label":"M", "x":8.25, "y":3},
+                {"label":"<", "x":9.25, "y":3},
+                {"label":">", "x":10.25, "y":3},
+                {"label":"?", "x":11.25, "y":3},
+                {"label":"Shift", "x":12.25, "y":3, "w":1.75},
+                {"label":"Up", "x":14, "y":3},
+                {"label":"Fn", "x":15, "y":3},
+                {"label":"Ctrl", "x":0, "y":4, "w":1.25},
+                {"label":"Win", "x":1.25, "y":4, "w":1.25},
+                {"label":"Alt", "x":2.5, "y":4, "w":1.25},
+                {"x":3.75, "y":4, "w":6.25},
+                {"label":"Fn", "x":10, "y":4, "w":1.25},
+                {"label":"Menu", "x":11.25, "y":4, "w":1.25},
+                {"label":"Left", "x":13, "y":4},
+                {"label":"Down", "x":14, "y":4},
+                {"label":"Right", "x":15, "y":4}
+            ]
+        }
+    }
+}

keyboards/handwired/p65rgb/keymaps/default/keymap.c

@@ -0,0 +1,33 @@
+/* Copyright 2019 marhalloweenvt
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+	[0] = LAYOUT( /* Base */
+        KC_GESC,        KC_1,       KC_2,       KC_3,   KC_4,   KC_5,   KC_6,   KC_7,   KC_8,       KC_9,   KC_0,       KC_MINS,    KC_EQL,     KC_GRV,     KC_BSLS, KC_DEL,
+        KC_TAB,         KC_Q,       KC_W,       KC_E,   KC_R,   KC_T,   KC_Y,   KC_U,   KC_I,       KC_O,   KC_P,       KC_LBRC,    KC_RBRC,    KC_BSPC,    KC_PGUP,
+		CTL_T(KC_CAPS), KC_A,       KC_S,       KC_D,   KC_F,   KC_G,   KC_H,   KC_J,   KC_K,       KC_L,   KC_SCLN,    KC_QUOT,    KC_ENT,     KC_ENT,     KC_PGDN,
+		KC_LSFT,        KC_Z,       KC_X,       KC_C,   KC_V,   KC_B,   KC_N,   KC_M,   KC_COMM,    KC_DOT, KC_SLSH,    KC_RSFT,    KC_UP,      TO(1),
+		KC_LCTL,        KC_LGUI,    KC_LALT,                            KC_SPC,         MO(1),      KC_APP,             KC_LEFT,    KC_DOWN,    KC_RIGHT),
+    [1] = LAYOUT( /* FN */
+        KC_GESC,       KC_F1,    KC_F2,   KC_F3,  KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,   KC_F11,  KC_F12,  KC_TRNS, KC_TRNS,   KC_INS,
+        KC_TRNS,       RGB_TOG,  RGB_MOD, RGB_HUI,RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, KC_TRNS, KC_PSCR, KC_SLCK,  KC_PAUS, RESET,    KC_HOME,
+        CTL_T(KC_CAPS),RGB_SPI,  RGB_SPD, KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,  KC_TRNS, KC_TRNS, EEP_RST,  KC_END,
+        KC_LSFT,       KC_TRNS,  KC_TRNS, KC_TRNS,KC_TRNS, KC_TRNS, NK_TOGG, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,  KC_TRNS,          KC_VOLU,  KC_MUTE,
+        KC_TRNS,       KC_TRNS,  KC_TRNS,                               KC_TRNS,                   KC_TRNS, KC_TRNS,  KC_MPRV,      KC_VOLD,  KC_MNXT),
+
+};

keyboards/handwired/p65rgb/p65rgb.c

@@ -0,0 +1,49 @@
+/* Copyright 2019 marhalloweenvt
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include "p65rgb.h"
+
+led_config_t g_led_config = { {
+    { 0,   1,  2,  3,  4,  5,  6,  7,  8,  9, 10, 11, 12, 13, 14, 15, 16 },
+    { 33, 32, 31, 30, 29, 28, 27, 26, 25, 24, 23, 22, 21, 20, 19, 18, 17 },
+    { 34, 35, 36, 37, 38, 39, 40, 41, 42, 43, 44, 45, 46, 47, 48, 49, 50 },
+    { 67, 66, 65, 64, 63, 62, 61, 60, 59, 58, 57, 56, 55, 54, 53, 52, 51 },
+    { 68, 69, 70, 71, 72, 73, 74, 75, 76, 77, 78, 79, 80, 81, 82 }
+}, {
+    { 0,   0 }, { 15,   0 }, { 30,   0 }, { 45,   0 }, { 60,   0 }, { 75,   0 }, { 90,   0 }, {105,   0 }, {120,   0 }, {135,   0 }, {150,   0 }, {165,   0 }, {180,   0 }, {195,   0 }, {205,   0 }, {210,   0 }, {224,   0 },
+    { 224,16 }, {224,  16 }, {210,  16 }, {180,  16 }, {165,  16 }, {150,  16 }, {135,  16 }, {120,  16 }, {105,  16 }, { 90,  16 }, { 75,  16 }, { 60,  16 }, { 45,  16 }, { 30,  16 }, { 15,  16 }, {  0,  16 }, {  0,  16 },
+    { 0,  32 }, {  0,  32 }, { 15,  32 }, { 30,  32 }, { 45,  32 }, { 60,  32 }, { 75,  32 }, { 90,  32 }, {105,  32 }, {120,  32 }, {135,  32 }, {150,  32 }, {165,  32 }, {190,  32 }, {205,  32 }, {210,  32 }, {224,  32 },
+    { 224, 8 }, {224,  48 }, {210,  48 }, {195,  48 }, {180,  48 }, {150,  48 }, {135,  48 }, {120,  48 }, {105,  48 }, { 90,  48 }, { 75,  48 }, { 60,  48 }, { 45,  48 }, { 30,  48 }, { 15,  48 }, {  0,  48 }, {  0,  48 },
+    { 0,  64 }, {  0,  64 }, {  0,  64 }, { 15,  64 }, { 15,  64 }, { 40,  64 }, { 90,  64 }, {105,  64 }, {150,  64 }, {180,  64 }, {180,  64 }, {195,  64 }, {210,  64 }, {220,  64 }, {224,  64 }
+}, {
+    1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
+    2, 1, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 1, 2,
+    2, 1, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 1,
+    2, 2, 1, 1, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 1, 2,
+    2, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 2
+} };
+
+void suspend_power_down_kb(void)
+{
+    rgb_matrix_set_suspend_state(true);
+    suspend_power_down_user();
+}
+
+void suspend_wakeup_init_kb(void)
+{
+    rgb_matrix_set_suspend_state(false);
+    suspend_wakeup_init_user();
+}

keyboards/handwired/p65rgb/p65rgb.h

@@ -0,0 +1,42 @@
+/* Copyright 2019 marhalloweenvt
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+#include "quantum.h"
+
+/* This a shortcut to help you visually see your layout.
+ *
+ * The first section contains all of the arguments representing the physical
+ * layout of the board and position of the keys.
+ *
+ * The second converts the arguments into a two-dimensional array which
+ * represents the switch matrix.
+ */
+#define LAYOUT( \
+    k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d,   k0e, k0f, \
+    k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c,        k1e, k1f, \
+    k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c,        K2e, k2f, \
+    k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a,      k3c,        k3e, k3f, \
+    k40, k41, k42,           k45,                k49, k4a,      k4c,        k4e, k4f  \
+) { \
+    { k00,  k01,   k02,   k03,   k04,   k05, k06,   k07,   k08,   k09, k0a,  k0b,   k0c,  k0d,   k0e, k0f, KC_NO  }, \
+    { k10,  k11,   k12,   k13,   k14,   k15, k16,   k17,   k18,   k19, k1a,  k1b,   k1c,  KC_NO, k1e, k1f, KC_NO  }, \
+    { k20,  k21,   k22,   k23,   k24,   k25, k26,   k27,   k28,   k29, k2a,  k2b,   k2c,  KC_NO, K2e, k2f, KC_NO  }, \
+    { k30,  k31,   k32,   k33,   k34,   k35, k36,   k37,   k38,   k39, k3a,  KC_NO, k3c,  KC_NO, k3e, k3f, KC_NO  }, \
+    { k40,  k41,   k42,   KC_NO, KC_NO, k45, KC_NO, KC_NO, KC_NO, k49, k4a,  KC_NO, k4c,  KC_NO, k4e, k4f, KC_NO  }, \
+}
+

keyboards/handwired/p65rgb/readme.md

@@ -0,0 +1,15 @@
+# p65rgb
+
+![p65rgb](https://i.imgur.com/Z3RfOXe.jpg)
+
+A replacement PCB for my E6.5 Keyboard
+
+* Keyboard Maintainer: [marhalloweenvt](https://github.com/marhalloweenvt)
+* Hardware Supported: p65rgb
+* Hardware Availability: p65rgb
+
+Make example for this keyboard (after setting up your build environment):
+
+    make handwired/p65rgb:default
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

keyboards/handwired/p65rgb/rules.mk

@@ -0,0 +1,33 @@
+# MCU name
+MCU = atmega32u4
+
+# Bootloader selection
+#   Teensy       halfkay
+#   Pro Micro    caterina
+#   Atmel DFU    atmel-dfu
+#   LUFA DFU     lufa-dfu
+#   QMK DFU      qmk-dfu
+#   ATmega32A    bootloadHID
+#   ATmega328P   USBasp
+BOOTLOADER = qmk-dfu
+
+# Build Options
+#   change yes to no to disable
+#
+BOOTMAGIC_ENABLE = yes      # Virtual DIP switch configuration
+MOUSEKEY_ENABLE = yes       # Mouse keys
+EXTRAKEY_ENABLE = yes       # Audio control and System control
+CONSOLE_ENABLE = no         # Console for debug
+COMMAND_ENABLE = no         # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = yes           # USB Nkey Rollover
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
+RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
+RGB_MATRIX_ENABLE = WS2812  # Enable keyboard RGB backlight functionality with ws2812 driver
+MIDI_ENABLE = no            # MIDI support
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+AUDIO_ENABLE = no           # Audio output on port C6
+FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
+HD44780_ENABLE = no         # Enable support for HD44780 based LCDs

keyboards/handwired/prime_exl/config.h

@@ -49,23 +49,3 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define LOCKING_SUPPORT_ENABLE
 /* Locking resynchronize hack */
 #define LOCKING_RESYNC_ENABLE
-
-#define DYNAMIC_KEYMAP_LAYER_COUNT 4
-
-// EEPROM usage
-
-// TODO: refactor with new user EEPROM code (coming soon)
-#define EEPROM_MAGIC 0x451F
-#define EEPROM_MAGIC_ADDR 34
-// Bump this every time we change what we store
-// This will automatically reset the EEPROM with defaults
-// and avoid loading invalid data from the EEPROM
-#define EEPROM_VERSION 0x08
-#define EEPROM_VERSION_ADDR 36
-
-// Dynamic keymap starts after EEPROM version
-#define DYNAMIC_KEYMAP_EEPROM_ADDR 37
-// Dynamic macro starts after dynamic keymaps (37+(4*10*9*2)) = (37+720)
-#define DYNAMIC_KEYMAP_MACRO_EEPROM_ADDR 757
-#define DYNAMIC_KEYMAP_MACRO_EEPROM_SIZE 267    // 1024-DYNAMIC_KEYMAP_MACRO_EEPROM_ADDR
-#define DYNAMIC_KEYMAP_MACRO_COUNT 16

keyboards/handwired/prime_exl/keymaps/via/rules.mk

@@ -1,86 +1 @@
-# MCU name
-MCU = atmega32u4
-
-# Processor frequency.
-#     This will define a symbol, F_CPU, in all source code files equal to the
-#     processor frequency in Hz. You can then use this symbol in your source code to
-#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
-#     automatically to create a 32-bit value in your source code.
-#
-#     This will be an integer division of F_USB below, as it is sourced by
-#     F_USB after it has run through any CPU prescalers. Note that this value
-#     does not *change* the processor frequency - it should merely be updated to
-#     reflect the processor speed set externally so that the code can use accurate
-#     software delays.
-F_CPU = 16000000
-
-
-#
-# LUFA specific
-#
-# Target architecture (see library "Board Types" documentation).
-ARCH = AVR8
-
-# Input clock frequency.
-#     This will define a symbol, F_USB, in all source code files equal to the
-#     input clock frequency (before any prescaling is performed) in Hz. This value may
-#     differ from F_CPU if prescaling is used on the latter, and is required as the
-#     raw input clock is fed directly to the PLL sections of the AVR for high speed
-#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
-#     at the end, this will be done automatically to create a 32-bit value in your
-#     source code.
-#
-#     If no clock division is performed on the input clock inside the AVR (via the
-#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
-F_USB = $(F_CPU)
-
-# Interrupt driven control endpoint task(+60)
-OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
-
-
-# Bootloader selection
-#   Teensy       halfkay
-#   Pro Micro    caterina
-#   Atmel DFU    atmel-dfu
-#   LUFA DFU     lufa-dfu
-#   QMK DFU      qmk-dfu
-#   atmega32a    bootloadHID
-BOOTLOADER = atmel-dfu
-
-
-# If you don't know the bootloader type, then you can specify the
-# Boot Section Size in *bytes* by uncommenting out the OPT_DEFS line
-#   Teensy halfKay      512
-#   Teensy++ halfKay    1024
-#   Atmel DFU loader    4096
-#   LUFA bootloader     4096
-#   USBaspLoader        2048
-# OPT_DEFS += -DBOOTLOADER_SIZE=4096
-
-
-# Build Options
-#   change yes to no to disable
-#
-BOOTMAGIC_ENABLE = no      # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE = no       # Mouse keys(+4700)
-EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
-CONSOLE_ENABLE = no        # Console for debug(+400)
-COMMAND_ENABLE = no        # Commands for debug and configuration
-# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
-SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
-# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-NKRO_ENABLE = yes            # USB Nkey Rollover
-BACKLIGHT_ENABLE = yes       # Enable keyboard backlight functionality on B7 by default
-RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
-MIDI_ENABLE = no            # MIDI support (+2400 to 4200, depending on config)
-UNICODE_ENABLE = no         # Unicode
-BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
-AUDIO_ENABLE = no           # Audio output on port C6
-FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
-HD44780_ENABLE = no 		# Enable support for HD44780 based LCDs (+400)
-
-# This is the VIA magic
-RAW_ENABLE = yes
-DYNAMIC_KEYMAP_ENABLE = yes
-SRC += keyboards/wilba_tech/wt_main.c
-
+VIA_ENABLE = yes

keyboards/hineybush/h87a/config.h

@@ -72,5 +72,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define RGBLIGHT_HUE_STEP 8
 #define RGBLIGHT_SAT_STEP 8
 #define RGBLIGHT_VAL_STEP 8
+#define RGBLIGHT_LIMIT_VAL 200
 #define RGBLIGHT_SLEEP // RGB will turn off when PC is put to sleep
 #endif

keyboards/hineybush/h87a/h87a.c

@@ -42,4 +42,11 @@ void led_set_kb(uint8_t usb_led) {
 	led_set_user(usb_led);
 }
 
-
+void eeconfig_init_kb(void) {  // EEPROM is getting reset!
+  rgblight_enable(); // Enable RGB by default
+  rgblight_sethsv(0, 255, 128);  // Set default HSV - red hue, full saturation, medium brightness
+  rgblight_mode(RGBLIGHT_MODE_RAINBOW_SWIRL + 2); // set to RGB_RAINBOW_SWIRL by default
+  
+  eeconfig_update_kb(0);
+  eeconfig_init_user();
+}