Branch point for 2020 Feb 29 Breaking Change.

common_features.mk

@@ -374,28 +374,12 @@ QUANTUM_SRC:= \
     $(QUANTUM_DIR)/keymap_common.c \
     $(QUANTUM_DIR)/keycode_config.c
 
-
-
-VALID_CUSTOM_MATRIX_TYPES:= yes lite no
-
-CUSTOM_MATRIX ?= no
-
+# Include the standard or split matrix code if needed
 ifneq ($(strip $(CUSTOM_MATRIX)), yes)
-    ifeq ($(filter $(CUSTOM_MATRIX),$(VALID_CUSTOM_MATRIX_TYPES)),)
-        $(error CUSTOM_MATRIX="$(CUSTOM_MATRIX)" is not a valid custom matrix type)
-    endif
-
-    # Include common stuff for all non custom matrix users
-    QUANTUM_SRC += $(QUANTUM_DIR)/matrix_common.c
-
-    # if 'lite' then skip the actual matrix implementation
-    ifneq ($(strip $(CUSTOM_MATRIX)), lite)
-        # Include the standard or split matrix code if needed
-        ifeq ($(strip $(SPLIT_KEYBOARD)), yes)
-            QUANTUM_SRC += $(QUANTUM_DIR)/split_common/matrix.c
-        else
-            QUANTUM_SRC += $(QUANTUM_DIR)/matrix.c
-        endif
+    ifeq ($(strip $(SPLIT_KEYBOARD)), yes)
+        QUANTUM_SRC += $(QUANTUM_DIR)/split_common/matrix.c
+    else
+        QUANTUM_SRC += $(QUANTUM_DIR)/matrix.c
     endif
 endif
 

docs/breaking_changes.md

@@ -10,16 +10,16 @@ The breaking change period is when we will merge PR's that change QMK in dangero
 
 ## When is the next Breaking Change?
 
-The next Breaking Change is scheduled for February 29, 2020.
+The next Breaking Change is scheduled for Nov 29.
 
 ### Important Dates
 
 * [x] 2019 Sep 21 - `future` is created. It will be rebased weekly.
-* [ ] 2020 Feb 1 - `future` closed to new PR's.
-* [ ] 2020 Feb 1 - Call for testers.
-* [ ] 2020 Feb 26 - `master` is locked, no PR's merged.
-* [ ] 2020 Feb 28 - Merge `future` to `master`.
-* [ ] 2020 Feb 29 - `master` is unlocked. PR's can be merged again.
+* [ ] 2019 Nov 01 - `future` closed to new PR's.
+* [ ] 2019 Nov 01 - Call for testers.
+* [ ] 2019 Nov 27 - `master` is locked, no PR's merged.
+* [ ] 2019 Nov 29 - Merge `future` to `master`.
+* [ ] 2019 Nov 30 - `master` is unlocked. PR's can be merged again.
 
 ## What changes will be included?
 

docs/config_options.md

@@ -143,8 +143,6 @@ If you define these options you will enable the associated feature, which may in
 * `#define IGNORE_MOD_TAP_INTERRUPT`
   * makes it possible to do rolling combos (zx) with keys that convert to other keys on hold, by enforcing the `TAPPING_TERM` for both keys.
   * See [Mod tap interrupt](feature_advanced_keycodes.md#ignore-mod-tap-interrupt) for details
-* `#define IGNORE_MOD_TAP_INTERRUPT_PER_KEY`
-  * enables handling for per key `IGNORE_MOD_TAP_INTERRUPT` settings
 * `#define TAPPING_FORCE_HOLD`
   * makes it possible to use a dual role key as modifier shortly after having been tapped
   * See [Hold after tap](feature_advanced_keycodes.md#tapping-force-hold)

docs/custom_quantum_functions.md

@@ -489,24 +489,14 @@ The `val` is the value of the data that you want to write to EEPROM.  And the `e
 
 # Custom Tapping Term
 
-By default, the tapping term and related options (such as `IGNORE_MOD_TAP_INTERRUPT`) are defined globally, and are not configurable by key.  For most users, this is perfectly fine.  But in some cases, dual function keys would be greatly improved by different timeout behaviors than `LT` keys, or because some keys may be easier to hold than others.  Instead of using custom key codes for each, this allows for per key configurable timeout behaviors.
+By default, the tapping term is defined globally, and is not configurable by key.  For most users, this is perfectly fine.  But in come cases, dual function keys would be greatly improved by different timeouts than `LT` keys, or because some keys may be easier to hold than others.  Instead of using custom key codes for each, this allows for per key configurable `TAPPING_TERM`.
 
-There are two configurable options to control per-key timeout behaviors:
-
-- `TAPPING_TERM_PER_KEY`
-- `IGNORE_MOD_TAP_INTERRUPT_PER_KEY`
-
-You need to add `#define` lines to your `config.h` for each feature you want.
-
-```
-#define TAPPING_TERM_PER_KEY
-#define IGNORE_MOD_TAP_INTERRUPT_PER_KEY
-```
+To enable this functionality, you need to add `#define TAPPING_TERM_PER_KEY` to your `config.h`, first. 
 
 
 ## Example `get_tapping_term` Implementation
 
-To change the `TAPPING_TERM` based on the keycode, you'd want to add something like the following to your `keymap.c` file:
+To change the `TAPPING TERM` based on the keycode, you'd want to add something like the following to your `keymap.c` file: 
 
 ```c
 uint16_t get_tapping_term(uint16_t keycode) {
@@ -521,21 +511,6 @@ uint16_t get_tapping_term(uint16_t keycode) {
 }
 ```
 
-## Example `get_ignore_mod_tap_interrupt` Implementation
+### `get_tapping_term` Function Documentation
 
-To change the `IGNORE_MOD_TAP_INTERRUPT` value based on the keycode, you'd want to add something like the following to your `keymap.c` file:
-
-```c
-bool get_ignore_mod_tap_interrupt(uint16_t keycode) {
-  switch (keycode) {
-    case SFT_T(KC_SPC):
-      return true;
-    default:
-      return false;
-  }
-}
-```
-
-## `get_tapping_term` / `get_ignore_mod_tap_interrupt` Function Documentation
-
-Unlike many of the other functions here, there isn't a need (or even reason) to have a quantum or keyboard level function. Only user level functions are useful here, so no need to mark them as such.
+Unlike many of the other functions here, there isn't a need (or even reason) to have a quantum or keyboard level function. Only a user level function is useful here, so no need to mark it as such.

docs/feature_rgb_matrix.md

@@ -199,7 +199,6 @@ enum rgb_matrix_effects {
     RGB_MATRIX_SOLID_COLOR = 1,     // Static single hue, no speed support
     RGB_MATRIX_ALPHAS_MODS,         // Static dual hue, speed is hue for secondary hue
     RGB_MATRIX_GRADIENT_UP_DOWN,    // Static gradient top to bottom, speed controls how much gradient changes
-    RGB_MATRIX_GRADIENT_LEFT_RIGHT,    // Static gradient left to right, speed controls how much gradient changes
     RGB_MATRIX_BREATHING,           // Single hue brightness cycling animation
     RGB_MATRIX_BAND_SAT,        // Single hue band fading saturation scrolling left to right
     RGB_MATRIX_BAND_VAL,        // Single hue band fading brightness scrolling left to right

docs/getting_started_build_tools.md

@@ -120,12 +120,12 @@ If this is a bit complex for you, Docker might be the turnkey solution you need.
 util/docker_build.sh keyboard:keymap
 # For example: util/docker_build.sh ergodox_ez:steno
 ```
-This will compile the desired keyboard/keymap and leave the resulting `.hex` or `.bin` file in the QMK directory for you to flash. If `:keymap` is omitted, all keymaps are used. Note that the parameter format is the same as when building with `make`.
+This will compile the desired keyboard/keymap and leave the resulting `.hex` or `.bin` file in the QMK directory for you to flash. If `:keymap` is omitted, the `default` keymap is used. Note that the parameter format is the same as when building with `make`.
 
 You can also start the script without any parameters, in which case it will ask you to input the build parameters one by one, which you may find easier to use:
 ```bash
 util/docker_build.sh
-# Reads parameters as input (leave blank for all keyboards/keymaps)
+# Reads parameters as input (leave blank for defaults)
 ```
 
 There is also support for building _and_ flashing the keyboard straight from Docker by specifying the `target` as well:

docs/ja/README.md

@@ -2,7 +2,7 @@
 
 <!---
   original document: eae21eed7:docs/README.md
-  git diff eae21eed7 HEAD -- docs/README.md | cat
+  git diff eae21eed7 HEAD docs/README.md | cat
 -->
 
 [![現在のバージョン](https://img.shields.io/github/tag/qmk/qmk_firmware.svg)](https://github.com/qmk/qmk_firmware/tags)

docs/ja/arm_debugging.md

@@ -2,7 +2,7 @@
 
 <!---
   original document: eae21eed7:docs/arm_debugging.md
-  git diff eae21eed7 HEAD -- docs/arm_debugging.md | cat
+  git diff eae21eed7 HEAD docs/arm_debugging.md | cat
 -->
 
 このページでは、SWD アダプタとオープンソース/フリーツールを使って ARM MCU をデバッグするためのセットアップ方法について説明します。このガイドでは、GNU MCU Eclipse IDE for C/C++ Developers および OpenOCD を必要な依存関係と一緒にインストールします。

docs/ja/cli.md

@@ -1,8 +1,8 @@
 # QMK CLI
 
 <!---
-  original document: d598f01cb:docs/cli.md
-  git diff d598f01cb HEAD -- docs/cli.md | cat
+  original document: d598f01cb:cli.md
+  git diff d598f01cb HEAD cli.md | cat
 -->
 
 このページは QMK CLI のセットアップと使用方法について説明します。

docs/ja/cli_configuration.md

@@ -1,8 +1,8 @@
 # QMK CLI 設定
 
 <!---
-  original document: d598f01cb:docs/cli_configuration.md
-  git diff d598f01cb HEAD -- docs/cli_configuration.md | cat
+  original document: d598f01cb:cli_configuration.md
+  git diff d598f01cb HEAD cli_configuration.md | cat
 -->
 
 このドキュメントは `qmk config` がどのように動作するかを説明します。

docs/ja/config_options.md

@@ -148,8 +148,6 @@ QMK での全ての利用可能な設定にはデフォルトがあります。
 * `#define IGNORE_MOD_TAP_INTERRUPT`
    * 両方のキーに `TAPPING_TERM` を適用することで、ホールド時に他のキーに変換するキーを使ってローリングコンボ (zx) をすることができるようにします
    * 詳細は [Mod tap interrupt](ja/feature_advanced_keycodes.md#ignore-mod-tap-interrupt) を見てください
-* `#define IGNORE_MOD_TAP_INTERRUPT_PER_KEY`
-   * キーごとの `IGNORE_MOD_TAP_INTERRUPT` 設定の処理を有効にします
 * `#define TAPPING_FORCE_HOLD`
    * タップされた直後に、デュアルロールキーを修飾子として使用できるようにします
    * [Hold after tap](ja/feature_advanced_keycodes.md#tapping-force-hold)を見てください

docs/ja/contributing.md

@@ -2,7 +2,7 @@
 
 <!---
   original document: d47809575:docs/contributing.md
-  git diff d47809575 HEAD -- docs/contributing.md | cat
+  git diff d47809575 HEAD docs/contributing.md | cat
 -->
 
 👍🎉 まず、これを読み貢献する時間を作ってくれてありがとうございます！🎉👍

docs/ja/driver_installation_zadig.md

@@ -2,7 +2,7 @@
 
 <!---
   original document: d598f01cb:docs/driver_installation_zadig.md
-  git diff d598f01cb HEAD -- docs/driver_installation_zadig.md | cat
+  git diff d598f01cb HEAD docs/driver_installation_zadig.md | cat
 -->
 
 QMK はホストにたいして通常の HID キーボードデバイスとして振る舞うため特別なドライバは必要ありません。しかし、Windows でのキーボードへの書き込みは、多くの場合、キーボードをリセットした時に現れるブートローダデバイスで*行います*。

docs/ja/faq.md

@@ -2,7 +2,7 @@
 
 <!---
   original document: d598f01cb:docs/faq.md
-  git diff d598f01cb HEAD -- docs/faq.md | cat
+  git diff d598f01cb HEAD docs/faq.md | cat
 -->
 
 * [一般](ja/faq_general.md)

docs/ja/faq_debug.md

@@ -2,7 +2,7 @@
 
 <!---
   original document: 376419a4f:docs/faq_debug.md
-  git diff 376419a4f HEAD -- docs/faq_debug.md | cat
+  git diff 376419a4f HEAD docs/faq_debug.md | cat
 -->
 
 このページは、キーボードのトラブルシューティングについての様々な一般的な質問を説明します。

docs/ja/faq_general.md

@@ -2,7 +2,7 @@
 
 <!---
   original document: d598f01cb:docs/faq_general.md
-  git diff d598f01cb HEAD -- docs/faq_general.md | cat
+  git diff d598f01cb HEAD docs/faq_general.md | cat
 -->
 
 ## QMK とは何か？

docs/ja/faq_keymap.md

@@ -2,7 +2,7 @@
 
 <!---
   original document: 376419a4f:docs/faq_keymap.md
-  git diff 376419a4f HEAD -- docs/faq_keymap.md | cat
+  git diff 376419a4f HEAD docs/faq_keymap.md | cat
 -->
 
 このページは人々がキーマップについてしばしば持つ疑問について説明します。まだ読んだことが無い場合には、[キーマップの概要](ja/keymap.md)を最初に読むべきです。

docs/ja/getting_started_getting_help.md

@@ -1,8 +1,8 @@
 # 助けを得る
 
 <!---
-  original document: d598f01cb:docs/getting_started_getting_help.md
-  git diff d598f01cb HEAD -- docs/getting_started_getting_help.md | cat
+  original document: d598f01cb:getting_started_getting_help.md
+  git diff d598f01cb HEAD getting_started_getting_help.md | cat
 -->
 
 QMK に関して助けを得るための多くのリソースがあります。

docs/ja/getting_started_github.md

@@ -1,8 +1,8 @@
 # QMK で Github を使う方法
 
 <!---
-  original document: d598f01cb:docs/getting_started_github.md
-  git diff d598f01cb HEAD -- docs/getting_started_github.md | cat
+  original document: d598f01cb:getting_started_github.md
+  git diff d598f01cb HEAD getting_started_github.md | cat
 -->
 
 Github は慣れていない人には少し注意が必要です - このガイドは、QMK におけるフォーク、クローン、プルリクエストのサブミットの各ステップについて説明します。

docs/ja/getting_started_introduction.md

@@ -1,8 +1,8 @@
 # はじめに
 
 <!---
-  original document: d598f01cb:docs/getting_started_introduction.md
-  git diff d598f01cb HEAD -- docs/getting_started_introduction.md | cat
+  original document: d598f01cb:getting_started_introduction.md
+  git diff d598f01cb HEAD getting_started_introduction.md | cat
 -->
 
 このページでは、QMK プロジェクトで作業するために知っておくべき基本的な情報について説明しようと思います。Unix シェルの操作に精通していることを前提としていますが、C について、または make を使ったコンパイルについて精通しているとは想定していません。

docs/ja/newbs.md

@@ -3,7 +3,7 @@
 <!---
   grep --no-filename "^[ ]*git diff" docs/ja/*.md | sh
   original document: adf4acf59:docs/newbs.md
-  git diff adf4acf59 HEAD -- docs/newbs.md | cat
+  git diff adf4acf59 HEAD docs/newbs.md | cat
 -->
 
 QMK は、メカニカルキーボード用の強力なオープンソースファームウェアです。

docs/ja/newbs_building_firmware_configurator.md

@@ -3,7 +3,7 @@
 <!---
   grep --no-filename "^[ ]*git diff" docs/ja/*.md | sh
   original document: ed0575fc8:docs/newbs_building_firmware_configurator.md
-  git diff ed0575fc8 HEAD -- docs/newbs_building_firmware_configurator.md | cat
+  git diff ed0575fc8 HEAD docs/newbs_building_firmware_configurator.md | cat
 -->
 
 [QMK Configurator](https://config.qmk.fm) は、QMKファームウェアの hex ファイルを生成するオンライングラフィカルユーザーインターフェイスです。

docs/ja/newbs_flashing.md

@@ -3,7 +3,7 @@
 <!---
   grep --no-filename "^[ ]*git diff" docs/ja/*.md | sh
   original document: ed0575fc8:docs/newbs_flashing.md
-  git diff ed0575fc8 HEAD -- docs/newbs_flashing.md | cat
+  git diff ed0575fc8 HEAD docs/newbs_flashing.md | cat
 -->
 
 カスタムファームウェアは出来たので、キーボードに書き込みたくなるでしょう/フラッシュしたくなるでしょう。

docs/ja/newbs_getting_started.md

@@ -2,8 +2,8 @@
 
 <!---
   grep --no-filename "^[ ]*git diff" docs/ja/*.md | sh
-  original document: 161d469:docs/newbs_getting_started.md
-  git diff 161d469 HEAD -- docs/newbs_getting_started.md | cat
+  original document: docs/newbs_getting_started.md
+  git diff 161d469 HEAD docs/newbs_getting_started.md | cat
 -->
 
 キーボードにはプロセッサが入っており、それはコンピュータに入っているものと大して違わないものです。

docs/ja/newbs_git_best_practices.md

@@ -3,7 +3,7 @@
 <!---
   grep --no-filename "^[ ]*git diff" docs/ja/*.md | sh
   original document: adf4acf59:docs/newbs_git_best_practices.md
-  git diff adf4acf59 HEAD -- docs/newbs_git_best_practices.md | cat
+  git diff adf4acf59 HEAD docs/newbs_git_best_practices.md | cat
 -->
 
 ## または、"如何にして私は心配することをやめて Git を愛することを学んだか。"

docs/ja/newbs_git_resolving_merge_conflicts.md

@@ -3,7 +3,7 @@
 <!---
   grep --no-filename "^[ ]*git diff" docs/ja/*.md | sh
   original document: adf4acf59:docs/newbs_git_resolving_merge_conflicts.md
-  git diff adf4acf59 HEAD -- docs/newbs_git_resolving_merge_conflicts.md | cat
+  git diff adf4acf59 HEAD docs/newbs_git_resolving_merge_conflicts.md | cat
 -->
 
 ブランチでの作業の完了に時間がかかる場合、他の人が行った変更が、プルリクエストを開いたときにブランチに加えた変更と競合することがあります。

docs/ja/newbs_git_resynchronize_a_branch.md

@@ -3,7 +3,7 @@
 <!---
   grep --no-filename "^[ ]*git diff" docs/ja/*.md | sh
   original document: adf4acf59:docs/newbs_git_resynchronize_a_branch.md
-  git diff adf4acf59 HEAD -- docs/newbs_git_resynchronize_a_branch.md | cat
+  git diff adf4acf59 HEAD docs/newbs_git_resynchronize_a_branch.md | cat
 -->
 
 仮にあなたの `master` ブランチにあなたのコミットを行い、そしてあなたの QMK リポジトリの更新が必要になったとします。

docs/ja/newbs_git_using_your_master_branch.md

@@ -3,7 +3,7 @@
 <!---
   grep --no-filename "^[ ]*git diff" docs/ja/*.md | sh
   original document: adf4acf59:docs/newbs_git_using_your_master_branch.md
-  git diff adf4acf59 HEAD -- docs/newbs_git_using_your_master_branch.md | cat
+  git diff adf4acf59 HEAD docs/newbs_git_using_your_master_branch.md | cat
 -->
 
 QMK の開発では、何がどこで行われているかにかかわらず、`master` ブランチを最新の状態に保つことを強くお勧めします、しかし `master` ブランチには***絶対に直接コミットしないでください***。

docs/ja/newbs_learn_more_resources.md

@@ -3,7 +3,7 @@
 <!---
   grep --no-filename "^[ ]*git diff" docs/ja/*.md | sh
   original document: ed0575fc8:docs/newbs_learn_more_resources.md
-  git diff ed0575fc8 HEAD -- docs/newbs_learn_more_resources.md | cat
+  git diff ed0575fc8 HEAD docs/newbs_learn_more_resources.md | cat
 -->
 
 これらのリソースは、QMKコミュニティの新しいメンバーに、初心者向けドキュメントで提供されている情報に対する理解を深めることを目的としています。

docs/ja/newbs_testing_debugging.md

@@ -3,7 +3,7 @@
 <!---
   grep --no-filename "^[ ]*git diff" docs/ja/*.md | sh
   original document: ed0575fc8:docs/newbs_testing_debugging.md
-  git diff ed0575fc8 HEAD -- docs/newbs_testing_debugging.md | cat
+  git diff ed0575fc8 HEAD docs/newbs_testing_debugging.md | cat
 -->
 
 カスタムファームウェアをキーボードへ書き込んだら、テストする準備が整います。運が良ければ全て問題なく動作しているはずですが、もしそうでなければこのドキュメントがどこが悪いのか調べるのに役立ちます。

keyboards/allison/allison.c

@@ -1,17 +0,0 @@
-/* Copyright 2020 Yiancar
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-
-#include "allison.h"

keyboards/allison/allison.h

@@ -1,44 +0,0 @@
-/* Copyright 2020 Yiancar
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-
-#pragma once
-
-#include "quantum.h"
-
-/* This is a shortcut to help you visually see your layout.
- *
- * The first section contains all of the arguments representing the physical
- * layout of the board and position of the keys.
- *
- * The second converts the arguments into a two-dimensional array which
- * represents the switch matrix.
- */
-#define LAYOUT_all( \
-         K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D,  \
-    K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E, K0E, \
-    K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D, K2E, \
-    K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, K3E, \
-    K40, K41, K42, K43, K44, K45, K46, K47, K48, K49, K4A, K4B, K4C, K4D, K4E, \
-    K50, K51, K52, K53,                     K58,                K5C, K5D, K5E  \
-) \
-{ \
-    { K00, K01, K02, K03, K04,   K05,   K06,   K07,   K08, K09,   K0A,   K0B,   K0C, K0D, K0E }, \
-    { K10, K11, K12, K13, K14,   K15,   K16,   K17,   K18, K19,   K1A,   K1B,   K1C, K1D, K1E }, \
-    { K20, K21, K22, K23, K24,   K25,   K26,   K27,   K28, K29,   K2A,   K2B,   K2C, K2D, K2E }, \
-    { K30, K31, K32, K33, K34,   K35,   K36,   K37,   K38, K39,   K3A,   K3B,   K3C, K3D, K3E }, \
-    { K40, K41, K42, K43, K44,   K45,   K46,   K47,   K48, K49,   K4A,   K4B,   K4C, K4D, K4E }, \
-    { K50, K51, K52, K53, KC_NO, KC_NO, KC_NO, KC_NO, K58, KC_NO, KC_NO, KC_NO, K5C, K5D, K5E }  \
-}

keyboards/allison/config.h

@@ -1,252 +0,0 @@
-/*
-Copyright 2020 Yiancar
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program.  If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#pragma once
-
-#include "config_common.h"
-
-/* USB Device descriptor parameter */
-#define VENDOR_ID 0x8968
-#define PRODUCT_ID 0x414D
-#define DEVICE_VER 0x0001
-#define MANUFACTURER protoTypist
-#define PRODUCT Allison
-#define DESCRIPTION A custom luxurious 60 with F-row and Macro
-
-/* key matrix size */
-#define MATRIX_ROWS 6
-#define MATRIX_COLS 15
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
- */
-#define MATRIX_ROW_PINS { D2, D1, D0, B1, B2, D3}
-#define MATRIX_COL_PINS { F4, F5, F6, F7, C7, C6, B6, B5, B4, D7, D6, D4, D5, F1, F0 }
-#define UNUSED_PINS
-
-/* COL2ROW, ROW2COL*/
-#define DIODE_DIRECTION COL2ROW
-
-/*
- * Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN.
- */
-// #define SOFT_SERIAL_PIN D0  // or D1, D2, D3, E6
-
-#define BACKLIGHT_PIN B7
-#define BACKLIGHT_BREATHING
-#define BACKLIGHT_LEVELS 4
-
-// #define RGB_DI_PIN E2
-// #ifdef RGB_DI_PIN
-//   #define RGBLED_NUM 16
-//   #define RGBLIGHT_HUE_STEP 8
-//   #define RGBLIGHT_SAT_STEP 8
-//   #define RGBLIGHT_VAL_STEP 8
-//   #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
-//   #define RGBLIGHT_SLEEP  /* If defined, the RGB lighting will be switched off when the host goes to sleep */
-// /*== all animations enable ==*/
-//   #define RGBLIGHT_ANIMATIONS
-// /*== or choose animations ==*/
-//   #define RGBLIGHT_EFFECT_BREATHING
-//   #define RGBLIGHT_EFFECT_RAINBOW_MOOD
-//   #define RGBLIGHT_EFFECT_RAINBOW_SWIRL
-//   #define RGBLIGHT_EFFECT_SNAKE
-//   #define RGBLIGHT_EFFECT_KNIGHT
-//   #define RGBLIGHT_EFFECT_CHRISTMAS
-//   #define RGBLIGHT_EFFECT_STATIC_GRADIENT
-//   #define RGBLIGHT_EFFECT_RGB_TEST
-//   #define RGBLIGHT_EFFECT_ALTERNATING
-// /*== customize breathing effect ==*/
-//   /*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
-//   #define RGBLIGHT_BREATHE_TABLE_SIZE 256      // 256(default) or 128 or 64
-//   /*==== use exp() and sin() ====*/
-//   #define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85  // 1 to 2.7
-//   #define RGBLIGHT_EFFECT_BREATHE_MAX    255   // 0 to 255
-// #endif
-
-/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
-#define DEBOUNCE 5
-
-/* define if matrix has ghost (lacks anti-ghosting diodes) */
-//#define MATRIX_HAS_GHOST
-
-/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
-#define LOCKING_SUPPORT_ENABLE
-/* Locking resynchronize hack */
-#define LOCKING_RESYNC_ENABLE
-
-/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
- * This is userful for the Windows task manager shortcut (ctrl+shift+esc).
- */
-// #define GRAVE_ESC_CTRL_OVERRIDE
-
-/*
- * Force NKRO
- *
- * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
- * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
- * makefile for this to work.)
- *
- * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
- * until the next keyboard reset.
- *
- * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
- * fully operational during normal computer usage.
- *
- * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
- * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
- * bootmagic, NKRO mode will always be enabled until it is toggled again during a
- * power-up.
- *
- */
-//#define FORCE_NKRO
-
-/*
- * Magic Key Options
- *
- * Magic keys are hotkey commands that allow control over firmware functions of
- * the keyboard. They are best used in combination with the HID Listen program,
- * found here: https://www.pjrc.com/teensy/hid_listen.html
- *
- * The options below allow the magic key functionality to be changed. This is
- * useful if your keyboard/keypad is missing keys and you want magic key support.
- *
- */
-
-/* key combination for magic key command */
-/* defined by default; to change, uncomment and set to the combination you want */
-// #define IS_COMMAND() (get_mods() == MOD_MASK_SHIFT)
-
-/* control how magic key switches layers */
-//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS  true
-//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS  true
-//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false
-
-/* override magic key keymap */
-//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS
-//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS
-//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM
-//#define MAGIC_KEY_HELP           H
-//#define MAGIC_KEY_HELP_ALT       SLASH
-//#define MAGIC_KEY_DEBUG          D
-//#define MAGIC_KEY_DEBUG_MATRIX   X
-//#define MAGIC_KEY_DEBUG_KBD      K
-//#define MAGIC_KEY_DEBUG_MOUSE    M
-//#define MAGIC_KEY_VERSION        V
-//#define MAGIC_KEY_STATUS         S
-//#define MAGIC_KEY_CONSOLE        C
-//#define MAGIC_KEY_LAYER0         0
-//#define MAGIC_KEY_LAYER0_ALT     GRAVE
-//#define MAGIC_KEY_LAYER1         1
-//#define MAGIC_KEY_LAYER2         2
-//#define MAGIC_KEY_LAYER3         3
-//#define MAGIC_KEY_LAYER4         4
-//#define MAGIC_KEY_LAYER5         5
-//#define MAGIC_KEY_LAYER6         6
-//#define MAGIC_KEY_LAYER7         7
-//#define MAGIC_KEY_LAYER8         8
-//#define MAGIC_KEY_LAYER9         9
-//#define MAGIC_KEY_BOOTLOADER     B
-//#define MAGIC_KEY_BOOTLOADER_ALT ESC
-//#define MAGIC_KEY_LOCK           CAPS
-//#define MAGIC_KEY_EEPROM         E
-//#define MAGIC_KEY_EEPROM_CLEAR   BSPACE
-//#define MAGIC_KEY_NKRO           N
-//#define MAGIC_KEY_SLEEP_LED      Z
-
-/*
- * Feature disable options
- *  These options are also useful to firmware size reduction.
- */
-
-/* disable debug print */
-//#define NO_DEBUG
-
-/* disable print */
-//#define NO_PRINT
-
-/* disable action features */
-//#define NO_ACTION_LAYER
-//#define NO_ACTION_TAPPING
-//#define NO_ACTION_ONESHOT
-
-/* disable these deprecated features by default */
-#ifndef LINK_TIME_OPTIMIZATION_ENABLE
-  #define NO_ACTION_MACRO
-  #define NO_ACTION_FUNCTION
-#endif
-/*
- * MIDI options
- */
-
-/* Prevent use of disabled MIDI features in the keymap */
-//#define MIDI_ENABLE_STRICT 1
-
-/* enable basic MIDI features:
-   - MIDI notes can be sent when in Music mode is on
-*/
-//#define MIDI_BASIC
-
-/* enable advanced MIDI features:
-   - MIDI notes can be added to the keymap
-   - Octave shift and transpose
-   - Virtual sustain, portamento, and modulation wheel
-   - etc.
-*/
-//#define MIDI_ADVANCED
-
-/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
-//#define MIDI_TONE_KEYCODE_OCTAVES 1
-
-/*
- * HD44780 LCD Display Configuration
- */
-/*
-#define LCD_LINES           2     //< number of visible lines of the display
-#define LCD_DISP_LENGTH    16     //< visibles characters per line of the display
-
-#define LCD_IO_MODE      1            //< 0: memory mapped mode, 1: IO port mode
-
-#if LCD_IO_MODE
-#define LCD_PORT         PORTB        //< port for the LCD lines
-#define LCD_DATA0_PORT   LCD_PORT     //< port for 4bit data bit 0
-#define LCD_DATA1_PORT   LCD_PORT     //< port for 4bit data bit 1
-#define LCD_DATA2_PORT   LCD_PORT     //< port for 4bit data bit 2
-#define LCD_DATA3_PORT   LCD_PORT     //< port for 4bit data bit 3
-#define LCD_DATA0_PIN    4            //< pin for 4bit data bit 0
-#define LCD_DATA1_PIN    5            //< pin for 4bit data bit 1
-#define LCD_DATA2_PIN    6            //< pin for 4bit data bit 2
-#define LCD_DATA3_PIN    7            //< pin for 4bit data bit 3
-#define LCD_RS_PORT      LCD_PORT     //< port for RS line
-#define LCD_RS_PIN       3            //< pin  for RS line
-#define LCD_RW_PORT      LCD_PORT     //< port for RW line
-#define LCD_RW_PIN       2            //< pin  for RW line
-#define LCD_E_PORT       LCD_PORT     //< port for Enable line
-#define LCD_E_PIN        1            //< pin  for Enable line
-#endif
-*/
-
-/* Bootmagic Lite key configuration */
-#define BOOTMAGIC_LITE_ROW 0
-#define BOOTMAGIC_LITE_COLUMN 0

keyboards/allison/info.json

@@ -1,12 +0,0 @@
-{
-    "keyboard_name": "allison",
-    "url": "www.yiancar-designs.com",
-    "maintainer": "Yiancar",
-    "width": 16.25, 
-    "height": 6.25, 
-    "layouts": {
-        "LAYOUT_all": {
-            "layout": [{"label":"0,0", "x":1.25, "y":0}, {"label":"0,1", "x":2.5, "y":0}, {"label":"0,2", "x":3.5, "y":0}, {"label":"0,3", "x":4.5, "y":0}, {"label":"0,4", "x":5.5, "y":0}, {"label":"0,5", "x":6.75, "y":0}, {"label":"0,6", "x":7.75, "y":0}, {"label":"0,7", "x":8.75, "y":0}, {"label":"0,8", "x":9.75, "y":0}, {"label":"0,9", "x":11, "y":0}, {"label":"0,10", "x":12, "y":0}, {"label":"0,11", "x":13, "y":0}, {"label":"0,12", "x":14, "y":0}, {"label":"0,13", "x":15.25, "y":0}, {"label":"1,0", "x":0, "y":1.25}, {"label":"1,1", "x":1.25, "y":1.25}, {"label":"1,2", "x":2.25, "y":1.25}, {"label":"1,3", "x":3.25, "y":1.25}, {"label":"1,4", "x":4.25, "y":1.25}, {"label":"1,5", "x":5.25, "y":1.25}, {"label":"1,6", "x":6.25, "y":1.25}, {"label":"1,7", "x":7.25, "y":1.25}, {"label":"1,8", "x":8.25, "y":1.25}, {"label":"1,9", "x":9.25, "y":1.25}, {"label":"1,10", "x":10.25, "y":1.25}, {"label":"1,11", "x":11.25, "y":1.25}, {"label":"1,12", "x":12.25, "y":1.25}, {"label":"1,13", "x":13.25, "y":1.25}, {"label":"1,14", "x":14.25, "y":1.25}, {"label":"0,14", "x":15.25, "y":1.25}, {"label":"2,0", "x":0, "y":2.25}, {"label":"2,1", "x":1.25, "y":2.25, "w":1.5}, {"label":"2,2", "x":2.75, "y":2.25}, {"label":"2,3", "x":3.75, "y":2.25}, {"label":"2,4", "x":4.75, "y":2.25}, {"label":"2,5", "x":5.75, "y":2.25}, {"label":"2,6", "x":6.75, "y":2.25}, {"label":"2,7", "x":7.75, "y":2.25}, {"label":"2,8", "x":8.75, "y":2.25}, {"label":"2,9", "x":9.75, "y":2.25}, {"label":"2,10", "x":10.75, "y":2.25}, {"label":"2,11", "x":11.75, "y":2.25}, {"label":"2,12", "x":12.75, "y":2.25}, {"label":"2,13", "x":13.75, "y":2.25}, {"label":"2,14", "x":14.75, "y":2.25, "w":1.5}, {"label":"3,0", "x":0, "y":3.25}, {"label":"3,1", "x":1.25, "y":3.25, "w":1.75}, {"label":"3,2", "x":3, "y":3.25}, {"label":"3,3", "x":4, "y":3.25}, {"label":"3,4", "x":5, "y":3.25}, {"label":"3,5", "x":6, "y":3.25}, {"label":"3,6", "x":7, "y":3.25}, {"label":"3,7", "x":8, "y":3.25}, {"label":"3,8", "x":9, "y":3.25}, {"label":"3,9", "x":10, "y":3.25}, {"label":"3,10", "x":11, "y":3.25}, {"label":"3,11", "x":12, "y":3.25}, {"label":"3,12", "x":13, "y":3.25}, {"label":"3,13", "x":14, "y":3.25}, {"label":"3,14", "x":15, "y":3.25, "w":1.25}, {"label":"4,0", "x":0, "y":4.25}, {"label":"4,1", "x":1.25, "y":4.25, "w":1.25}, {"label":"4,2", "x":2.5, "y":4.25}, {"label":"4,3", "x":3.5, "y":4.25}, {"label":"4,4", "x":4.5, "y":4.25}, {"label":"4,5", "x":5.5, "y":4.25}, {"label":"4,6", "x":6.5, "y":4.25}, {"label":"4,7", "x":7.5, "y":4.25}, {"label":"4,8", "x":8.5, "y":4.25}, {"label":"4,9", "x":9.5, "y":4.25}, {"label":"4,10", "x":10.5, "y":4.25}, {"label":"4,11", "x":11.5, "y":4.25}, {"label":"4,12", "x":12.5, "y":4.25}, {"label":"4,13", "x":13.5, "y":4.25, "w":1.75}, {"label":"4,14", "x":15.25, "y":4.25}, {"label":"5,0", "x":0, "y":5.25}, {"label":"5,1", "x":1.25, "y":5.25, "w":1.5}, {"label":"5,2", "x":2.75, "y":5.25}, {"label":"5,3", "x":3.75, "y":5.25, "w":1.5}, {"label":"5,8", "x":5.25, "y":5.25, "w":7}, {"label":"5,12", "x":12.25, "y":5.25, "w":1.5}, {"label":"5,13", "x":13.75, "y":5.25}, {"label":"5,14", "x":14.75, "y":5.25, "w":1.5}]
-        }
-    }
-}

keyboards/allison/keymaps/default/keymap.c

@@ -1,50 +0,0 @@
-/* Copyright 2020 Yiancar
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-#include QMK_KEYBOARD_H
-
-const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-    [0] = LAYOUT_all( /* Base */
-             KC_ESC,  KC_F1,   KC_F2,   KC_F3, KC_F4, KC_F5, KC_F6, KC_F7,  KC_F8, KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_INS,
-    KC_HOME, KC_GRV,  KC_1,    KC_2,    KC_3,  KC_4,  KC_5,  KC_6,  KC_7,   KC_8,  KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_BSLS, KC_DEL,
-    KC_PGUP, KC_TAB,  KC_Q,    KC_W,    KC_E,  KC_R,  KC_T,  KC_Y,  KC_U,   KC_I,  KC_O,    KC_P,    KC_LBRC, KC_RBRC, KC_BSPC,
-    KC_PGDN, KC_CAPS, KC_A,    KC_S,    KC_D,  KC_F,  KC_G,  KC_H,  KC_J,   KC_K,  KC_L,    KC_SCLN, KC_QUOT, KC_NUHS, KC_ENT,
-    KC_END,  KC_LSFT, KC_NUBS, KC_Z,    KC_X,  KC_C,  KC_V,  KC_B,  KC_N,   KC_M,  KC_COMM, KC_DOT,  KC_SLSH, KC_RSFT, MO(1),
-    KC_LGUI, KC_LCTL, KC_LGUI, KC_LALT,                             KC_SPC,                          KC_RALT, KC_APP,  KC_RCTL),
-
-    [1] = LAYOUT_all( /* FN1 */
-             RESET,   KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
-    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
-    KC_TRNS, KC_TRNS, KC_TRNS, KC_UP,   KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
-    KC_TRNS, KC_TRNS, KC_LEFT, KC_DOWN, KC_RGHT, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
-    KC_TRNS, KC_TRNS, KC_TRNS, BL_TOGG, BL_INC,  BL_DEC,  BL_BRTG, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
-    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,                                     KC_TRNS,                            KC_TRNS, KC_TRNS, KC_TRNS),
-
-    [2] = LAYOUT_all( /* Empty for dynamic keymaps */
-             KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
-    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
-    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
-    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
-    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
-    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,                                     KC_TRNS,                            KC_TRNS, KC_TRNS, KC_TRNS),
-
-    [3] = LAYOUT_all( /* Empty for dynamic keymaps */
-             KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
-    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
-    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
-    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
-    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
-    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,                                     KC_TRNS,                            KC_TRNS, KC_TRNS, KC_TRNS),
-};

keyboards/allison/keymaps/default/readme.md

@@ -1,7 +0,0 @@
-# The default keymaps for Allison
-
-![ANSI](https://i.imgur.com/L4MpWy7.png)
-
-![ISO](https://i.imgur.com/pvb3Gd7.png)
-
-![ANSI FN1](https://i.imgur.com/pEVv5q6.png)

keyboards/allison/keymaps/via/keymap.c

@@ -1,50 +0,0 @@
-/* Copyright 2020 Yiancar
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-#include QMK_KEYBOARD_H
-
-const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-    [0] = LAYOUT_all( /* Base */
-             KC_ESC,  KC_F1,   KC_F2,   KC_F3, KC_F4, KC_F5, KC_F6, KC_F7,  KC_F8, KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_INS,
-    KC_HOME, KC_GRV,  KC_1,    KC_2,    KC_3,  KC_4,  KC_5,  KC_6,  KC_7,   KC_8,  KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_BSLS, KC_DEL,
-    KC_PGUP, KC_TAB,  KC_Q,    KC_W,    KC_E,  KC_R,  KC_T,  KC_Y,  KC_U,   KC_I,  KC_O,    KC_P,    KC_LBRC, KC_RBRC, KC_BSPC,
-    KC_PGDN, KC_CAPS, KC_A,    KC_S,    KC_D,  KC_F,  KC_G,  KC_H,  KC_J,   KC_K,  KC_L,    KC_SCLN, KC_QUOT, KC_NUHS, KC_ENT,
-    KC_END,  KC_LSFT, KC_NUBS, KC_Z,    KC_X,  KC_C,  KC_V,  KC_B,  KC_N,   KC_M,  KC_COMM, KC_DOT,  KC_SLSH, KC_RSFT, MO(1),
-    KC_LGUI, KC_LCTL, KC_LGUI, KC_LALT,                             KC_SPC,                          KC_RALT, KC_APP,  KC_RCTL),
-
-    [1] = LAYOUT_all( /* FN1 */
-             RESET,   KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
-    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
-    KC_TRNS, KC_TRNS, KC_TRNS, KC_UP,   KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
-    KC_TRNS, KC_TRNS, KC_LEFT, KC_DOWN, KC_RGHT, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
-    KC_TRNS, KC_TRNS, KC_TRNS, BL_TOGG, BL_INC,  BL_DEC,  BL_BRTG, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
-    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,                                     KC_TRNS,                            KC_TRNS, KC_TRNS, KC_TRNS),
-
-    [2] = LAYOUT_all( /* Empty for dynamic keymaps */
-             KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
-    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
-    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
-    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
-    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
-    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,                                     KC_TRNS,                            KC_TRNS, KC_TRNS, KC_TRNS),
-
-    [3] = LAYOUT_all( /* Empty for dynamic keymaps */
-             KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
-    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
-    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
-    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
-    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
-    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,                                     KC_TRNS,                            KC_TRNS, KC_TRNS, KC_TRNS),
-};

keyboards/allison/keymaps/via/readme.md

@@ -1 +0,0 @@
-# Compile with this keymap to use VIA

keyboards/allison/readme.md

@@ -1,15 +0,0 @@
-# Allison
-
-![Allison](https://i.imgur.com/tvLtu4K.jpg)
-
-A custom luxurious 60 with F-row and Macro
-
-* Keyboard Maintainer: [Yiancar](http://yiancar-designs.com/) and on [github](https://github.com/yiancar)
-* Hardware Supported: ATmega32U4
-* Hardware Availability: Small production run by mrpetrov#9585 and [protoTypist](https://discord.gg/UvskpBB)
-
-Make example for this keyboard (after setting up your build environment):
-
-    make allison:default
-
-See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

keyboards/allison/rules.mk

@@ -1,32 +0,0 @@
-# MCU name
-MCU = atmega32u4
-
-# Bootloader selection
-#   Teensy       halfkay
-#   Pro Micro    caterina
-#   Atmel DFU    atmel-dfu
-#   LUFA DFU     lufa-dfu
-#   QMK DFU      qmk-dfu
-#   ATmega32A    bootloadHID
-#   ATmega328P   USBasp
-BOOTLOADER = atmel-dfu
-
-# Build Options
-#   change yes to no to disable
-#
-BOOTMAGIC_ENABLE = lite     # Virtual DIP switch configuration
-MOUSEKEY_ENABLE = yes       # Mouse keys
-EXTRAKEY_ENABLE = yes       # Audio control and System control
-CONSOLE_ENABLE = no         # Console for debug
-COMMAND_ENABLE = no         # Commands for debug and configuration
-# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
-SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
-# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-NKRO_ENABLE = yes           # USB Nkey Rollover
-BACKLIGHT_ENABLE = yes      # Enable keyboard backlight functionality
-RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
-MIDI_ENABLE = no            # MIDI support
-BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
-AUDIO_ENABLE = no           # Audio output on port C6
-FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
-HD44780_ENABLE = no         # Enable support for HD44780 based LCDs

keyboards/allison_numpad/allison_numpad.c

@@ -1,17 +0,0 @@
-/* Copyright 2020 Yiancar
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-
-#include "allison_numpad.h"

keyboards/allison_numpad/allison_numpad.h

@@ -1,61 +0,0 @@
-/* Copyright 2020 Yiancar
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-
-#pragma once
-
-#include "quantum.h"
-
-/* This is a shortcut to help you visually see your layout.
- *
- * The first section contains all of the arguments representing the physical
- * layout of the board and position of the keys.
- *
- * The second converts the arguments into a two-dimensional array which
- * represents the switch matrix.
- */
-#define LAYOUT_ortho_6x4( \
-    K00, K01, K02, K03, \
-    K10, K11, K12, K13, \
-    K20, K21, K22, K23, \
-    K30, K31, K32, K33, \
-    K40, K41, K42, K43, \
-    K50, K51, K52, K53  \
-) \
-{ \
-    { K00, K01, K02, K03 }, \
-    { K10, K11, K12, K13 }, \
-    { K20, K21, K22, K23 }, \
-    { K30, K31, K32, K33 }, \
-    { K40, K41, K42, K43 }, \
-    { K50, K51, K52, K53 }  \
-}
-
-#define LAYOUT_numpad_6x4( \
-    K00, K01, K02, K03, \
-    K10, K11, K12, K13, \
-    K20, K21, K22,      \
-    K30, K31, K32, K33, \
-    K40, K41, K42,      \
-    K50,      K52, K53  \
-) \
-{ \
-    { K00, K01,   K02, K03   }, \
-    { K10, K11,   K12, K13   }, \
-    { K20, K21,   K22, KC_NO }, \
-    { K30, K31,   K32, K33   }, \
-    { K40, K41,   K42, KC_NO }, \
-    { K50, KC_NO, K52, K53   }  \
-}

keyboards/allison_numpad/config.h

@@ -1,252 +0,0 @@
-/*
-Copyright 2020 Yiancar
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program.  If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#pragma once
-
-#include "config_common.h"
-
-/* USB Device descriptor parameter */
-#define VENDOR_ID 0x8968
-#define PRODUCT_ID 0x414E
-#define DEVICE_VER 0x0001
-#define MANUFACTURER protoTypist
-#define PRODUCT Allison Numpad
-#define DESCRIPTION A custom luxurious numpad to match Allison
-
-/* key matrix size */
-#define MATRIX_ROWS 6
-#define MATRIX_COLS 4
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
- */
-#define MATRIX_ROW_PINS { F4, C7, C6, B6, B5, B4 }
-#define MATRIX_COL_PINS { F6, F5, F1, F0 }
-#define UNUSED_PINS
-
-/* COL2ROW, ROW2COL*/
-#define DIODE_DIRECTION COL2ROW
-
-/*
- * Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN.
- */
-// #define SOFT_SERIAL_PIN D0  // or D1, D2, D3, E6
-
-#define BACKLIGHT_PIN B7
-#define BACKLIGHT_BREATHING
-#define BACKLIGHT_LEVELS 4
-
-// #define RGB_DI_PIN E2
-// #ifdef RGB_DI_PIN
-//   #define RGBLED_NUM 16
-//   #define RGBLIGHT_HUE_STEP 8
-//   #define RGBLIGHT_SAT_STEP 8
-//   #define RGBLIGHT_VAL_STEP 8
-//   #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
-//   #define RGBLIGHT_SLEEP  /* If defined, the RGB lighting will be switched off when the host goes to sleep */
-// /*== all animations enable ==*/
-//   #define RGBLIGHT_ANIMATIONS
-// /*== or choose animations ==*/
-//   #define RGBLIGHT_EFFECT_BREATHING
-//   #define RGBLIGHT_EFFECT_RAINBOW_MOOD
-//   #define RGBLIGHT_EFFECT_RAINBOW_SWIRL
-//   #define RGBLIGHT_EFFECT_SNAKE
-//   #define RGBLIGHT_EFFECT_KNIGHT
-//   #define RGBLIGHT_EFFECT_CHRISTMAS
-//   #define RGBLIGHT_EFFECT_STATIC_GRADIENT
-//   #define RGBLIGHT_EFFECT_RGB_TEST
-//   #define RGBLIGHT_EFFECT_ALTERNATING
-// /*== customize breathing effect ==*/
-//   /*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
-//   #define RGBLIGHT_BREATHE_TABLE_SIZE 256      // 256(default) or 128 or 64
-//   /*==== use exp() and sin() ====*/
-//   #define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85  // 1 to 2.7
-//   #define RGBLIGHT_EFFECT_BREATHE_MAX    255   // 0 to 255
-// #endif
-
-/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
-#define DEBOUNCE 5
-
-/* define if matrix has ghost (lacks anti-ghosting diodes) */
-//#define MATRIX_HAS_GHOST
-
-/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
-#define LOCKING_SUPPORT_ENABLE
-/* Locking resynchronize hack */
-#define LOCKING_RESYNC_ENABLE
-
-/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
- * This is userful for the Windows task manager shortcut (ctrl+shift+esc).
- */
-// #define GRAVE_ESC_CTRL_OVERRIDE
-
-/*
- * Force NKRO
- *
- * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
- * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
- * makefile for this to work.)
- *
- * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
- * until the next keyboard reset.
- *
- * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
- * fully operational during normal computer usage.
- *
- * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
- * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
- * bootmagic, NKRO mode will always be enabled until it is toggled again during a
- * power-up.
- *
- */
-//#define FORCE_NKRO
-
-/*
- * Magic Key Options
- *
- * Magic keys are hotkey commands that allow control over firmware functions of
- * the keyboard. They are best used in combination with the HID Listen program,
- * found here: https://www.pjrc.com/teensy/hid_listen.html
- *
- * The options below allow the magic key functionality to be changed. This is
- * useful if your keyboard/keypad is missing keys and you want magic key support.
- *
- */
-
-/* key combination for magic key command */
-/* defined by default; to change, uncomment and set to the combination you want */
-// #define IS_COMMAND() (get_mods() == MOD_MASK_SHIFT)
-
-/* control how magic key switches layers */
-//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS  true
-//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS  true
-//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false
-
-/* override magic key keymap */
-//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS
-//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS
-//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM
-//#define MAGIC_KEY_HELP           H
-//#define MAGIC_KEY_HELP_ALT       SLASH
-//#define MAGIC_KEY_DEBUG          D
-//#define MAGIC_KEY_DEBUG_MATRIX   X
-//#define MAGIC_KEY_DEBUG_KBD      K
-//#define MAGIC_KEY_DEBUG_MOUSE    M
-//#define MAGIC_KEY_VERSION        V
-//#define MAGIC_KEY_STATUS         S
-//#define MAGIC_KEY_CONSOLE        C
-//#define MAGIC_KEY_LAYER0         0
-//#define MAGIC_KEY_LAYER0_ALT     GRAVE
-//#define MAGIC_KEY_LAYER1         1
-//#define MAGIC_KEY_LAYER2         2
-//#define MAGIC_KEY_LAYER3         3
-//#define MAGIC_KEY_LAYER4         4
-//#define MAGIC_KEY_LAYER5         5
-//#define MAGIC_KEY_LAYER6         6
-//#define MAGIC_KEY_LAYER7         7
-//#define MAGIC_KEY_LAYER8         8
-//#define MAGIC_KEY_LAYER9         9
-//#define MAGIC_KEY_BOOTLOADER     B
-//#define MAGIC_KEY_BOOTLOADER_ALT ESC
-//#define MAGIC_KEY_LOCK           CAPS
-//#define MAGIC_KEY_EEPROM         E
-//#define MAGIC_KEY_EEPROM_CLEAR   BSPACE
-//#define MAGIC_KEY_NKRO           N
-//#define MAGIC_KEY_SLEEP_LED      Z
-
-/*
- * Feature disable options
- *  These options are also useful to firmware size reduction.
- */
-
-/* disable debug print */
-//#define NO_DEBUG
-
-/* disable print */
-//#define NO_PRINT
-
-/* disable action features */
-//#define NO_ACTION_LAYER
-//#define NO_ACTION_TAPPING
-//#define NO_ACTION_ONESHOT
-
-/* disable these deprecated features by default */
-#ifndef LINK_TIME_OPTIMIZATION_ENABLE
-  #define NO_ACTION_MACRO
-  #define NO_ACTION_FUNCTION
-#endif
-/*
- * MIDI options
- */
-
-/* Prevent use of disabled MIDI features in the keymap */
-//#define MIDI_ENABLE_STRICT 1
-
-/* enable basic MIDI features:
-   - MIDI notes can be sent when in Music mode is on
-*/
-//#define MIDI_BASIC
-
-/* enable advanced MIDI features:
-   - MIDI notes can be added to the keymap
-   - Octave shift and transpose
-   - Virtual sustain, portamento, and modulation wheel
-   - etc.
-*/
-//#define MIDI_ADVANCED
-
-/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
-//#define MIDI_TONE_KEYCODE_OCTAVES 1
-
-/*
- * HD44780 LCD Display Configuration
- */
-/*
-#define LCD_LINES           2     //< number of visible lines of the display
-#define LCD_DISP_LENGTH    16     //< visibles characters per line of the display
-
-#define LCD_IO_MODE      1            //< 0: memory mapped mode, 1: IO port mode
-
-#if LCD_IO_MODE
-#define LCD_PORT         PORTB        //< port for the LCD lines
-#define LCD_DATA0_PORT   LCD_PORT     //< port for 4bit data bit 0
-#define LCD_DATA1_PORT   LCD_PORT     //< port for 4bit data bit 1
-#define LCD_DATA2_PORT   LCD_PORT     //< port for 4bit data bit 2
-#define LCD_DATA3_PORT   LCD_PORT     //< port for 4bit data bit 3
-#define LCD_DATA0_PIN    4            //< pin for 4bit data bit 0
-#define LCD_DATA1_PIN    5            //< pin for 4bit data bit 1
-#define LCD_DATA2_PIN    6            //< pin for 4bit data bit 2
-#define LCD_DATA3_PIN    7            //< pin for 4bit data bit 3
-#define LCD_RS_PORT      LCD_PORT     //< port for RS line
-#define LCD_RS_PIN       3            //< pin  for RS line
-#define LCD_RW_PORT      LCD_PORT     //< port for RW line
-#define LCD_RW_PIN       2            //< pin  for RW line
-#define LCD_E_PORT       LCD_PORT     //< port for Enable line
-#define LCD_E_PIN        1            //< pin  for Enable line
-#endif
-*/
-
-/* Bootmagic Lite key configuration */
-#define BOOTMAGIC_LITE_ROW 0
-#define BOOTMAGIC_LITE_COLUMN 0

keyboards/allison_numpad/info.json

@@ -1,15 +0,0 @@
-{
-    "keyboard_name": "allison_numpad",
-    "url": "www.yiancar-designs.com",
-    "maintainer": "Yiancar",
-    "width": 4, 
-    "height": 6.25, 
-    "layouts": {
-        "LAYOUT_ortho_6x4": {
-            "layout": [{"label":"0,0", "x":0, "y":0}, {"label":"0,1", "x":1, "y":0}, {"label":"0,2", "x":2, "y":0}, {"label":"0,3", "x":3, "y":0}, {"label":"1,0", "x":0, "y":1.25}, {"label":"1,1", "x":1, "y":1.25}, {"label":"1,2", "x":2, "y":1.25}, {"label":"1,3", "x":3, "y":1.25}, {"label":"2,0", "x":0, "y":2.25}, {"label":"2,1", "x":1, "y":2.25}, {"label":"2,2", "x":2, "y":2.25}, {"label":"2,3", "x":3, "y":2.25}, {"label":"3,0", "x":0, "y":3.25}, {"label":"3,1", "x":1, "y":3.25}, {"label":"3,2", "x":2, "y":3.25}, {"label":"3,3", "x":3, "y":3.25}, {"label":"4,0", "x":0, "y":4.25}, {"label":"4,1", "x":1, "y":4.25}, {"label":"4,2", "x":2, "y":4.25}, {"label":"4,3", "x":3, "y":4.25}, {"label":"5,0", "x":0, "y":5.25}, {"label":"5,1", "x":1, "y":5.25}, {"label":"5,2", "x":2, "y":5.25}, {"label":"5,3", "x":3, "y":5.25}]
-        },
-        "LAYOUT_numpad_6x4": {
-            "layout": [{"label":"0,0", "x":0, "y":0}, {"label":"0,1", "x":1, "y":0}, {"label":"0,2", "x":2, "y":0}, {"label":"0,3", "x":3, "y":0}, {"label":"1,0", "x":0, "y":1.25}, {"label":"1,1", "x":1, "y":1.25}, {"label":"1,2", "x":2, "y":1.25}, {"label":"1,3", "x":3, "y":1.25}, {"label":"2,0", "x":0, "y":2.25}, {"label":"2,1", "x":1, "y":2.25}, {"label":"2,2", "x":2, "y":2.25}, {"label":"3,3", "x":3, "y":2.25, "h":2}, {"label":"3,0", "x":0, "y":3.25}, {"label":"3,1", "x":1, "y":3.25}, {"label":"3,2", "x":2, "y":3.25}, {"label":"4,0", "x":0, "y":4.25}, {"label":"4,1", "x":1, "y":4.25}, {"label":"4,2", "x":2, "y":4.25}, {"label":"5,3", "x":3, "y":4.25, "h":2}, {"label":"5,0", "x":0, "y":5.25, "w":2}, {"label":"5,2", "x":2, "y":5.25}]
-        }
-    }
-}

keyboards/allison_numpad/keymaps/default/keymap.c

@@ -1,50 +0,0 @@
-/* Copyright 2020 Yiancar
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-#include QMK_KEYBOARD_H
-
-const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-    [0] = LAYOUT_ortho_6x4( /* Base */
-    KC_PSCR, KC_SLCK, KC_PAUS, TG(1),
-    KC_NLCK, KC_PSLS, KC_PAST, KC_PMNS,
-    KC_P7,   KC_P8,   KC_P9,   KC_PPLS,
-    KC_P4,   KC_P5,   KC_P6,   KC_PPLS,
-    KC_P1,   KC_P2,   KC_P3,   KC_PENT,
-    KC_P0,   KC_P0,   KC_PDOT, KC_PENT),
-
-    [1] = LAYOUT_ortho_6x4( /* FN1 */
-    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
-    BL_TOGG, BL_INC,  BL_DEC,  BL_BRTG,
-    KC_TRNS, KC_UP,   KC_TRNS, KC_TRNS,
-    KC_LEFT, KC_DOWN, KC_RGHT, KC_TRNS,
-    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
-    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS),
-
-    [2] = LAYOUT_ortho_6x4( /* Empty for dynamic keymaps */
-    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
-    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
-    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
-    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
-    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
-    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS),
-
-    [3] = LAYOUT_ortho_6x4( /* Empty for dynamic keymaps */
-    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
-    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
-    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
-    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
-    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
-    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS),
-};

keyboards/allison_numpad/keymaps/default/readme.md

@@ -1,5 +0,0 @@
-# The default keymap for Allison Numpad
-
-![NUMPAD](https://i.imgur.com/1n2pl5p.png)
-
-![NUMPAD FN1](https://i.imgur.com/1n2pl5p.png)

keyboards/allison_numpad/keymaps/via/keymap.c

@@ -1,50 +0,0 @@
-/* Copyright 2020 Yiancar
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-#include QMK_KEYBOARD_H
-
-const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-    [0] = LAYOUT_ortho_6x4( /* Base */
-    KC_PSCR, KC_SLCK, KC_PAUS, TG(1),
-    KC_NLCK, KC_PSLS, KC_PAST, KC_PMNS,
-    KC_P7,   KC_P8,   KC_P9,   KC_PPLS,
-    KC_P4,   KC_P5,   KC_P6,   KC_PPLS,
-    KC_P1,   KC_P2,   KC_P3,   KC_PENT,
-    KC_P0,   KC_P0,   KC_PDOT, KC_PENT),
-
-    [1] = LAYOUT_ortho_6x4( /* FN1 */
-    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
-    BL_TOGG, BL_INC,  BL_DEC,  BL_BRTG,
-    KC_TRNS, KC_UP,   KC_TRNS, KC_TRNS,
-    KC_LEFT, KC_DOWN, KC_RGHT, KC_TRNS,
-    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
-    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS),
-
-    [2] = LAYOUT_ortho_6x4( /* Empty for dynamic keymaps */
-    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
-    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
-    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
-    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
-    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
-    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS),
-
-    [3] = LAYOUT_ortho_6x4( /* Empty for dynamic keymaps */
-    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
-    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
-    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
-    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
-    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
-    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS),
-};

keyboards/allison_numpad/keymaps/via/readme.md

@@ -1 +0,0 @@
-# Compile with this keymap to use VIA

keyboards/allison_numpad/keymaps/via/rules.mk

@@ -1 +0,0 @@
-VIA_ENABLE = yes

keyboards/allison_numpad/readme.md

@@ -1,15 +0,0 @@
-# Allison Numpad
-
-![Allison Numpad](https://i.imgur.com/tvLtu4K.jpg)
-
-A custom luxurious numpad to match Allison
-
-* Keyboard Maintainer: [Yiancar](http://yiancar-designs.com/) and on [github](https://github.com/yiancar)
-* Hardware Supported: ATmega32U4
-* Hardware Availability: Small production run by mrpetrov#9585 and [protoTypist](https://discord.gg/UvskpBB)
-
-Make example for this keyboard (after setting up your build environment):
-
-    make allison_numpad:default
-
-See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

keyboards/allison_numpad/rules.mk

@@ -1,34 +0,0 @@
-# MCU name
-MCU = atmega32u4
-
-# Bootloader selection
-#   Teensy       halfkay
-#   Pro Micro    caterina
-#   Atmel DFU    atmel-dfu
-#   LUFA DFU     lufa-dfu
-#   QMK DFU      qmk-dfu
-#   ATmega32A    bootloadHID
-#   ATmega328P   USBasp
-BOOTLOADER = atmel-dfu
-
-# Build Options
-#   change yes to no to disable
-#
-BOOTMAGIC_ENABLE = lite     # Virtual DIP switch configuration
-MOUSEKEY_ENABLE = yes       # Mouse keys
-EXTRAKEY_ENABLE = yes       # Audio control and System control
-CONSOLE_ENABLE = no         # Console for debug
-COMMAND_ENABLE = no         # Commands for debug and configuration
-# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
-SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
-# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-NKRO_ENABLE = yes           # USB Nkey Rollover
-BACKLIGHT_ENABLE = yes      # Enable keyboard backlight functionality
-RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
-MIDI_ENABLE = no            # MIDI support
-BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
-AUDIO_ENABLE = no           # Audio output on port C6
-FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
-HD44780_ENABLE = no         # Enable support for HD44780 based LCDs
-
-LAYOUTS = ortho_6x4 numpad_6x4

keyboards/at_at/660m/rules.mk

@@ -1,5 +1,39 @@
-# MCU name
-MCU = STM32F072
+# project specific files
+# SRC = ssd1306.c
+## chip/board settings
+# the next two should match the directories in
+#  <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)
+MCU_FAMILY = STM32
+MCU_SERIES = STM32F0xx
+# linker script to use
+# it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/
+#  or <this_dir>/ld/
+MCU_LDSCRIPT = STM32F072xB
+# startup code to use
+# is should exist in <chibios>/os/common/ports/ARMCMx/compilers/GCC/mk/
+MCU_STARTUP = stm32f0xx
+# it should exist either in <chibios>/os/hal/boards/
+#  or <this_dir>/boards
+BOARD = ST_STM32F072B_DISCOVERY
+# Cortex version
+# Teensy LC is cortex-m0; Teensy 3.x are cortex-m4
+MCU  = cortex-m0
+# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7
+ARMV = 6
+# If you want to be able to jump to bootloader from firmware on STM32 MCUs,
+# set the correct BOOTLOADER_ADDRESS. Either set it here, or define it in
+# ./bootloader_defs.h or in ./boards/<FOO>/bootloader_defs.h (if you have
+# a custom board definition that you plan to reuse).
+# If you're not setting it here, leave it commented out.
+# It is chip dependent, the correct number can be looked up here (page 175):
+# http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf
+# This also requires a patch to chibios:
+#   <tmk_dir>/tmk_core/tool/chibios/ch-bootloader-jump.patch
+#STM32_BOOTLOADER_ADDRESS = 0x1FFFC800
+
+# Options to pass to dfu-util when flashing
+DFU_ARGS = -d 0483:df11 -a 0 -s 0x08000000:leave
+DFU_SUFFIX_ARGS = -p df11 -v 0483
 
 # Build Options
 #   comment out to disable the options.

keyboards/c39/keymaps/drashna/config.h

@@ -10,5 +10,3 @@
 
 #define RGB_DI_PIN B10
 #define RGBLED_NUM 15
-
-#define SOLENOID_PIN B11

keyboards/c39/keymaps/drashna/rules.mk

@@ -18,5 +18,3 @@ AUDIO_ENABLE = yes           # Audio output on port C6
 RGBLIGHT_ENABLE = yes       # RGB Enable / Disable
 
 RGBLIGHT_STARTUP_ANIMATION = yes
-
-HAPTIC_ENABLE = SOLENOID

keyboards/candybar/rules.mk

@@ -1,5 +1,37 @@
-# MCU name
-MCU = STM32F072
+## chip/board settings
+# - the next two should match the directories in
+#   <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)
+MCU_FAMILY = STM32
+MCU_SERIES = STM32F0xx
+
+# Linker script to use
+# - it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/
+#   or <this_dir>/ld/
+MCU_LDSCRIPT = STM32F072xB
+
+# Startup code to use
+#  - it should exist in <chibios>/os/common/startup/ARMCMx/compilers/GCC/mk/
+MCU_STARTUP = stm32f0xx
+
+# Board: it should exist either in <chibios>/os/hal/boards/
+#  or <this_dir>/boards
+BOARD = ST_STM32F072B_DISCOVERY
+
+# Cortex version
+MCU  = cortex-m0
+
+# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7
+ARMV = 6
+
+# Vector table for application
+# 0x00000000-0x00001000 area is occupied by bootlaoder.*/
+# The CORTEX_VTOR... is needed only for MCHCK/Infinity KB
+# OPT_DEFS = -DCORTEX_VTOR_INIT=0x08005000
+OPT_DEFS =
+
+# Options to pass to dfu-util when flashing
+DFU_ARGS = -d 0483:df11 -a 0 -s 0x08000000:leave
+DFU_SUFFIX_ARGS = -p DF11 -v 0483
 
 # Build Options
 #   comment out to disable the options.

keyboards/cannonkeys/an_c/rules.mk

@@ -1,5 +1,35 @@
-# MCU name
-MCU = STM32F072
+# project specific files
+# SRC = ssd1306.c
+## chip/board settings
+# the next two should match the directories in
+#  <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)
+MCU_FAMILY = STM32
+MCU_SERIES = STM32F0xx
+# linker script to use
+# it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/
+#  or <this_dir>/ld/
+MCU_LDSCRIPT = STM32F072xB
+# startup code to use
+# is should exist in <chibios>/os/common/ports/ARMCMx/compilers/GCC/mk/
+MCU_STARTUP = stm32f0xx
+# it should exist either in <chibios>/os/hal/boards/
+#  or <this_dir>/boards
+BOARD = ST_STM32F072B_DISCOVERY
+# Cortex version
+# Teensy LC is cortex-m0; Teensy 3.x are cortex-m4
+MCU  = cortex-m0
+# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7
+ARMV = 6
+# If you want to be able to jump to bootloader from firmware on STM32 MCUs,
+# set the correct BOOTLOADER_ADDRESS. Either set it here, or define it in
+# ./bootloader_defs.h or in ./boards/<FOO>/bootloader_defs.h (if you have
+# a custom board definition that you plan to reuse).
+# If you're not setting it here, leave it commented out.
+# It is chip dependent, the correct number can be looked up here (page 175):
+# http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf
+# This also requires a patch to chibios:
+#   <tmk_dir>/tmk_core/tool/chibios/ch-bootloader-jump.patch
+#STM32_BOOTLOADER_ADDRESS = 0x1FFFC800
 
 # Build Options
 #   comment out to disable the options.
@@ -10,6 +40,8 @@ VPATH += keyboards/cannonkeys/stm32f072
 SRC =	keyboard.c \
       led.c
 
+DFU_ARGS = -d 0483:df11 -a 0 -s 0x08000000:leave
+
 #BOOTMAGIC_ENABLE = yes	# Virtual DIP switch configuration
 MOUSEKEY_ENABLE = yes	# Mouse keys
 EXTRAKEY_ENABLE = yes	# Audio control and System control

keyboards/cannonkeys/chimera65/rules.mk

@@ -1,5 +1,35 @@
-# MCU name
-MCU = STM32F072
+# project specific files
+# SRC = ssd1306.c
+## chip/board settings
+# the next two should match the directories in
+#  <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)
+MCU_FAMILY = STM32
+MCU_SERIES = STM32F0xx
+# linker script to use
+# it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/
+#  or <this_dir>/ld/
+MCU_LDSCRIPT = STM32F072xB
+# startup code to use
+# is should exist in <chibios>/os/common/ports/ARMCMx/compilers/GCC/mk/
+MCU_STARTUP = stm32f0xx
+# it should exist either in <chibios>/os/hal/boards/
+#  or <this_dir>/boards
+BOARD = ST_STM32F072B_DISCOVERY
+# Cortex version
+# Teensy LC is cortex-m0; Teensy 3.x are cortex-m4
+MCU  = cortex-m0
+# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7
+ARMV = 6
+# If you want to be able to jump to bootloader from firmware on STM32 MCUs,
+# set the correct BOOTLOADER_ADDRESS. Either set it here, or define it in
+# ./bootloader_defs.h or in ./boards/<FOO>/bootloader_defs.h (if you have
+# a custom board definition that you plan to reuse).
+# If you're not setting it here, leave it commented out.
+# It is chip dependent, the correct number can be looked up here (page 175):
+# http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf
+# This also requires a patch to chibios:
+#   <tmk_dir>/tmk_core/tool/chibios/ch-bootloader-jump.patch
+#STM32_BOOTLOADER_ADDRESS = 0x1FFFC800
 
 # Build Options
 #   comment out to disable the options.
@@ -10,6 +40,8 @@ VPATH += keyboards/cannonkeys/stm32f072
 SRC =	keyboard.c \
       led.c
 
+DFU_ARGS = -d 0483:df11 -a 0 -s 0x08000000:leave
+
 #BOOTMAGIC_ENABLE = yes	# Virtual DIP switch configuration
 MOUSEKEY_ENABLE = yes	# Mouse keys
 EXTRAKEY_ENABLE = yes	# Audio control and System control

keyboards/cannonkeys/instant60/rules.mk

@@ -1,5 +1,39 @@
-# MCU name
-MCU = STM32F072
+# project specific files
+# SRC = ssd1306.c
+## chip/board settings
+# the next two should match the directories in
+#  <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)
+MCU_FAMILY = STM32
+MCU_SERIES = STM32F0xx
+# linker script to use
+# it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/
+#  or <this_dir>/ld/
+MCU_LDSCRIPT = STM32F072xB
+# startup code to use
+# is should exist in <chibios>/os/common/ports/ARMCMx/compilers/GCC/mk/
+MCU_STARTUP = stm32f0xx
+# it should exist either in <chibios>/os/hal/boards/
+#  or <this_dir>/boards
+BOARD = ST_STM32F072B_DISCOVERY
+# Cortex version
+# Teensy LC is cortex-m0; Teensy 3.x are cortex-m4
+MCU  = cortex-m0
+# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7
+ARMV = 6
+# If you want to be able to jump to bootloader from firmware on STM32 MCUs,
+# set the correct BOOTLOADER_ADDRESS. Either set it here, or define it in
+# ./bootloader_defs.h or in ./boards/<FOO>/bootloader_defs.h (if you have
+# a custom board definition that you plan to reuse).
+# If you're not setting it here, leave it commented out.
+# It is chip dependent, the correct number can be looked up here (page 175):
+# http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf
+# This also requires a patch to chibios:
+#   <tmk_dir>/tmk_core/tool/chibios/ch-bootloader-jump.patch
+#STM32_BOOTLOADER_ADDRESS = 0x1FFFC800
+
+# Options to pass to dfu-util when flashing
+DFU_ARGS = -d 0483:df11 -a 0 -s 0x08000000:leave
+DFU_SUFFIX_ARGS = -p DF11 -v 0483
 
 # Build Options
 #   comment out to disable the options.

keyboards/cannonkeys/iron165/rules.mk

@@ -1,5 +1,35 @@
-# MCU name
-MCU = STM32F072
+# project specific files
+# SRC = ssd1306.c
+## chip/board settings
+# the next two should match the directories in
+#  <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)
+MCU_FAMILY = STM32
+MCU_SERIES = STM32F0xx
+# linker script to use
+# it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/
+#  or <this_dir>/ld/
+MCU_LDSCRIPT = STM32F072xB
+# startup code to use
+# is should exist in <chibios>/os/common/ports/ARMCMx/compilers/GCC/mk/
+MCU_STARTUP = stm32f0xx
+# it should exist either in <chibios>/os/hal/boards/
+#  or <this_dir>/boards
+BOARD = ST_STM32F072B_DISCOVERY
+# Cortex version
+# Teensy LC is cortex-m0; Teensy 3.x are cortex-m4
+MCU  = cortex-m0
+# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7
+ARMV = 6
+# If you want to be able to jump to bootloader from firmware on STM32 MCUs,
+# set the correct BOOTLOADER_ADDRESS. Either set it here, or define it in
+# ./bootloader_defs.h or in ./boards/<FOO>/bootloader_defs.h (if you have
+# a custom board definition that you plan to reuse).
+# If you're not setting it here, leave it commented out.
+# It is chip dependent, the correct number can be looked up here (page 175):
+# http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf
+# This also requires a patch to chibios:
+#   <tmk_dir>/tmk_core/tool/chibios/ch-bootloader-jump.patch
+#STM32_BOOTLOADER_ADDRESS = 0x1FFFC800
 
 # Build Options
 #   comment out to disable the options.
@@ -10,6 +40,9 @@ VPATH += keyboards/cannonkeys/stm32f072
 SRC =	keyboard.c \
       led.c
 
+DFU_ARGS = -d 0483:df11 -a 0 -s 0x08000000:leave
+DFU_SUFFIX_ARGS = -v 0483 -p DF11
+
 BOOTMAGIC_ENABLE = lite	# Virtual DIP switch configuration
 MOUSEKEY_ENABLE = yes	# Mouse keys
 EXTRAKEY_ENABLE = yes	# Audio control and System control

keyboards/cannonkeys/ortho48/rules.mk

@@ -1,18 +1,46 @@
-# MCU name
-MCU = STM32F103
+# project specific files
+VPATH += keyboards/cannonkeys/bluepill
+SRC =	led.c \
+      keyboard.c
 
 # GENERIC STM32F103C8T6 board - stm32duino bootloader
 OPT_DEFS = -DCORTEX_VTOR_INIT=0x2000
 MCU_LDSCRIPT = STM32F103x8_stm32duino_bootloader
 BOARD = GENERIC_STM32_F103
 
-DFU_ARGS = -d 1eaf:0003 -a2 -R
-DFU_SUFFIX_ARGS = -v 1eaf -p 0003
+# OPT_DEFS =
+# MCU_LDSCRIPT = STM32F103x8
+# BOARD = GENERIC_STM32_F103
+
+## chip/board settings
+# the next two should match the directories in
+#  <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)
+MCU_FAMILY = STM32
+MCU_SERIES = STM32F1xx
+# linker script to use
+# it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/
+#  or <this_dir>/ld/
+# startup code to use
+# is should exist in <chibios>/os/common/ports/ARMCMx/compilers/GCC/mk/
+MCU_STARTUP = stm32f1xx
+# it should exist either in <chibios>/os/hal/boards/
+#  or <this_dir>/boards
+# Cortex version
+# Teensy LC is cortex-m0; Teensy 3.x are cortex-m4
+MCU  = cortex-m3
+# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7
+ARMV = 7
+# If you want to be able to jump to bootloader from firmware on STM32 MCUs,
+# set the correct BOOTLOADER_ADDRESS. Either set it here, or define it in
+# ./bootloader_defs.h or in ./boards/<FOO>/bootloader_defs.h (if you have
+# a custom board definition that you plan to reuse).
+# If you're not setting it here, leave it commented out.
+# It is chip dependent, the correct number can be looked up here (page 175):
+# http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf
+# This also requires a patch to chibios:
+#   <tmk_dir>/tmk_core/tool/chibios/ch-bootloader-jump.patch
+#STM32_BOOTLOADER_ADDRESS = 0x1FFFC800
 
-# project specific files
-VPATH += keyboards/cannonkeys/bluepill
-SRC =	led.c \
-      keyboard.c
 
 #BOOTMAGIC_ENABLE = yes	# Virtual DIP switch configuration
 MOUSEKEY_ENABLE = yes	# Mouse keys

keyboards/cannonkeys/ortho60/rules.mk

@@ -1,18 +1,46 @@
-# MCU name
-MCU = STM32F103
+# project specific files
+VPATH += keyboards/cannonkeys/bluepill
+SRC =	led.c \
+      keyboard.c
 
 # GENERIC STM32F103C8T6 board - stm32duino bootloader
 OPT_DEFS = -DCORTEX_VTOR_INIT=0x2000
 MCU_LDSCRIPT = STM32F103x8_stm32duino_bootloader
 BOARD = GENERIC_STM32_F103
 
-DFU_ARGS = -d 1eaf:0003 -a2 -R
-DFU_SUFFIX_ARGS = -v 1eaf -p 0003
+# OPT_DEFS =
+# MCU_LDSCRIPT = STM32F103x8
+# BOARD = GENERIC_STM32_F103
+
+## chip/board settings
+# the next two should match the directories in
+#  <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)
+MCU_FAMILY = STM32
+MCU_SERIES = STM32F1xx
+# linker script to use
+# it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/
+#  or <this_dir>/ld/
+# startup code to use
+# is should exist in <chibios>/os/common/ports/ARMCMx/compilers/GCC/mk/
+MCU_STARTUP = stm32f1xx
+# it should exist either in <chibios>/os/hal/boards/
+#  or <this_dir>/boards
+# Cortex version
+# Teensy LC is cortex-m0; Teensy 3.x are cortex-m4
+MCU  = cortex-m3
+# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7
+ARMV = 7
+# If you want to be able to jump to bootloader from firmware on STM32 MCUs,
+# set the correct BOOTLOADER_ADDRESS. Either set it here, or define it in
+# ./bootloader_defs.h or in ./boards/<FOO>/bootloader_defs.h (if you have
+# a custom board definition that you plan to reuse).
+# If you're not setting it here, leave it commented out.
+# It is chip dependent, the correct number can be looked up here (page 175):
+# http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf
+# This also requires a patch to chibios:
+#   <tmk_dir>/tmk_core/tool/chibios/ch-bootloader-jump.patch
+#STM32_BOOTLOADER_ADDRESS = 0x1FFFC800
 
-# project specific files
-VPATH += keyboards/cannonkeys/bluepill
-SRC =	led.c \
-      keyboard.c
 
 #BOOTMAGIC_ENABLE = yes	# Virtual DIP switch configuration
 MOUSEKEY_ENABLE = yes	# Mouse keys

keyboards/cannonkeys/ortho75/rules.mk

@@ -1,18 +1,47 @@
-# MCU name
-MCU = STM32F103
+# project specific files
+VPATH += keyboards/cannonkeys/bluepill
+SRC =	led.c \
+      keyboard.c
 
 # GENERIC STM32F103C8T6 board - stm32duino bootloader
 OPT_DEFS = -DCORTEX_VTOR_INIT=0x2000
 MCU_LDSCRIPT = STM32F103x8_stm32duino_bootloader
 BOARD = GENERIC_STM32_F103
 
-DFU_ARGS = -d 1eaf:0003 -a2 -R
-DFU_SUFFIX_ARGS = -v 1eaf -p 0003
+# OPT_DEFS =
+# MCU_LDSCRIPT = STM32F103x8
+# BOARD = GENERIC_STM32_F103
 
-# project specific files
-VPATH += keyboards/cannonkeys/bluepill
-SRC =	led.c \
-      keyboard.c
+## chip/board settings
+# the next two should match the directories in
+#  <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)
+MCU_FAMILY = STM32
+MCU_SERIES = STM32F1xx
+# linker script to use
+# it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/
+#  or <this_dir>/ld/
+# startup code to use
+# is should exist in <chibios>/os/common/ports/ARMCMx/compilers/GCC/mk/
+MCU_STARTUP = stm32f1xx
+# it should exist either in <chibios>/os/hal/boards/
+#  or <this_dir>/boards
+# Cortex version
+# Teensy LC is cortex-m0; Teensy 3.x are cortex-m4
+MCU  = cortex-m3
+# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7
+ARMV = 7
+# If you want to be able to jump to bootloader from firmware on STM32 MCUs,
+# set the correct BOOTLOADER_ADDRESS. Either set it here, or define it in
+# ./bootloader_defs.h or in ./boards/<FOO>/bootloader_defs.h (if you have
+# a custom board definition that you plan to reuse).
+# If you're not setting it here, leave it commented out.
+# It is chip dependent, the correct number can be looked up here (page 175):
+# http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf
+# This also requires a patch to chibios:
+#   <tmk_dir>/tmk_core/tool/chibios/ch-bootloader-jump.patch
+#STM32_BOOTLOADER_ADDRESS = 0x1FFFC800
+
+DFU_ARGS = -d 1eaf:0003 -a 2 -R
 
 #BOOTMAGIC_ENABLE = yes	# Virtual DIP switch configuration
 MOUSEKEY_ENABLE = yes	# Mouse keys

keyboards/cannonkeys/practice60/rules.mk

@@ -1,18 +1,46 @@
-# MCU name
-MCU = STM32F103
+# project specific files
+VPATH += keyboards/cannonkeys/bluepill
+SRC =	led.c \
+      keyboard.c
 
 # GENERIC STM32F103C8T6 board - stm32duino bootloader
 OPT_DEFS = -DCORTEX_VTOR_INIT=0x2000
 MCU_LDSCRIPT = STM32F103x8_stm32duino_bootloader
 BOARD = GENERIC_STM32_F103
 
-DFU_ARGS = -d 1eaf:0003 -a2 -R
-DFU_SUFFIX_ARGS = -v 1eaf -p 0003
+# OPT_DEFS =
+# MCU_LDSCRIPT = STM32F103x8
+# BOARD = GENERIC_STM32_F103
+
+## chip/board settings
+# the next two should match the directories in
+#  <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)
+MCU_FAMILY = STM32
+MCU_SERIES = STM32F1xx
+# linker script to use
+# it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/
+#  or <this_dir>/ld/
+# startup code to use
+# is should exist in <chibios>/os/common/ports/ARMCMx/compilers/GCC/mk/
+MCU_STARTUP = stm32f1xx
+# it should exist either in <chibios>/os/hal/boards/
+#  or <this_dir>/boards
+# Cortex version
+# Teensy LC is cortex-m0; Teensy 3.x are cortex-m4
+MCU  = cortex-m3
+# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7
+ARMV = 7
+# If you want to be able to jump to bootloader from firmware on STM32 MCUs,
+# set the correct BOOTLOADER_ADDRESS. Either set it here, or define it in
+# ./bootloader_defs.h or in ./boards/<FOO>/bootloader_defs.h (if you have
+# a custom board definition that you plan to reuse).
+# If you're not setting it here, leave it commented out.
+# It is chip dependent, the correct number can be looked up here (page 175):
+# http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf
+# This also requires a patch to chibios:
+#   <tmk_dir>/tmk_core/tool/chibios/ch-bootloader-jump.patch
+#STM32_BOOTLOADER_ADDRESS = 0x1FFFC800
 
-# project specific files
-VPATH += keyboards/cannonkeys/bluepill
-SRC =	led.c \
-      keyboard.c
 
 #BOOTMAGIC_ENABLE = yes	# Virtual DIP switch configuration
 MOUSEKEY_ENABLE = yes	# Mouse keys

keyboards/cannonkeys/practice65/rules.mk

@@ -1,18 +1,46 @@
-# MCU name
-MCU = STM32F103
+# project specific files
+VPATH += keyboards/cannonkeys/bluepill
+SRC =	led.c \
+      keyboard.c
 
 # GENERIC STM32F103C8T6 board - stm32duino bootloader
 OPT_DEFS = -DCORTEX_VTOR_INIT=0x2000
 MCU_LDSCRIPT = STM32F103x8_stm32duino_bootloader
 BOARD = GENERIC_STM32_F103
 
-DFU_ARGS = -d 1eaf:0003 -a2 -R
-DFU_SUFFIX_ARGS = -v 1eaf -p 0003
+# OPT_DEFS =
+# MCU_LDSCRIPT = STM32F103x8
+# BOARD = GENERIC_STM32_F103
+
+## chip/board settings
+# the next two should match the directories in
+#  <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)
+MCU_FAMILY = STM32
+MCU_SERIES = STM32F1xx
+# linker script to use
+# it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/
+#  or <this_dir>/ld/
+# startup code to use
+# is should exist in <chibios>/os/common/ports/ARMCMx/compilers/GCC/mk/
+MCU_STARTUP = stm32f1xx
+# it should exist either in <chibios>/os/hal/boards/
+#  or <this_dir>/boards
+# Cortex version
+# Teensy LC is cortex-m0; Teensy 3.x are cortex-m4
+MCU  = cortex-m3
+# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7
+ARMV = 7
+# If you want to be able to jump to bootloader from firmware on STM32 MCUs,
+# set the correct BOOTLOADER_ADDRESS. Either set it here, or define it in
+# ./bootloader_defs.h or in ./boards/<FOO>/bootloader_defs.h (if you have
+# a custom board definition that you plan to reuse).
+# If you're not setting it here, leave it commented out.
+# It is chip dependent, the correct number can be looked up here (page 175):
+# http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf
+# This also requires a patch to chibios:
+#   <tmk_dir>/tmk_core/tool/chibios/ch-bootloader-jump.patch
+#STM32_BOOTLOADER_ADDRESS = 0x1FFFC800
 
-# project specific files
-VPATH += keyboards/cannonkeys/bluepill
-SRC =	led.c \
-      keyboard.c
 
 #BOOTMAGIC_ENABLE = yes	# Virtual DIP switch configuration
 MOUSEKEY_ENABLE = yes	# Mouse keys

keyboards/cannonkeys/satisfaction75/keymaps/default/keymap.c

@@ -17,7 +17,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #include QMK_KEYBOARD_H
 
-const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+const uint16_t keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
   [0] = LAYOUT_default(
     KC_ESC,   KC_F1,    KC_F2,    KC_F3,    KC_F4,    KC_F5,    KC_F6,    KC_F7,    KC_F8,    KC_F9,    KC_F10,   KC_F11,   KC_F12,
     KC_GRV,   KC_1,     KC_2,     KC_3,     KC_4,     KC_5,     KC_6,     KC_7,     KC_8,     KC_9,     KC_0,     KC_MINS,  KC_EQL,   KC_BSPC,  ENC_PRESS,

keyboards/cannonkeys/satisfaction75/keymaps/tester/keymap.c

@@ -17,7 +17,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #include QMK_KEYBOARD_H
 
-const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+const uint16_t keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
   [0] = LAYOUT_all(
     KC_ESC,   KC_F1,    KC_F2,    KC_F3,    KC_F4,    KC_F5,    KC_F6,    KC_F7,    KC_F8,    KC_F9,    KC_F10,   KC_F11,   KC_F12,
     KC_GRV,   KC_1,     KC_2,     KC_3,     KC_4,     KC_5,     KC_6,     KC_7,     KC_8,     KC_9,     KC_0,     KC_MINS,  KC_EQL,   KC_BSPC,  KC_DEL, ENC_PRESS,

keyboards/cannonkeys/satisfaction75/keymaps/via/keymap.c

@@ -17,7 +17,8 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #include QMK_KEYBOARD_H
 
-const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+const uint16_t keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
   [0] = LAYOUT_all(
     KC_ESC,   KC_F1,    KC_F2,    KC_F3,    KC_F4,    KC_F5,    KC_F6,    KC_F7,    KC_F8,    KC_F9,    KC_F10,   KC_F11,   KC_F12,
     KC_GRV,   KC_1,     KC_2,     KC_3,     KC_4,     KC_5,     KC_6,     KC_7,     KC_8,     KC_9,     KC_0,     KC_MINS,  KC_EQL,   KC_BSPC,  KC_DEL, ENC_PRESS,
@@ -35,3 +36,16 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
     RESET, _______, _______, _______,          _______,          _______,          _______, _______, _______, _______, _______, _______
   )
 };
+
+
+void matrix_init_user(void) {
+  //user initialization
+}
+
+void matrix_scan_user(void) {
+  //user matrix
+}
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+  return true;
+}

keyboards/cannonkeys/satisfaction75/rules.mk

@@ -1,5 +1,35 @@
-# MCU name
-MCU = STM32F072
+# project specific files
+# SRC = ssd1306.c
+## chip/board settings
+# the next two should match the directories in
+#  <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)
+MCU_FAMILY = STM32
+MCU_SERIES = STM32F0xx
+# linker script to use
+# it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/
+#  or <this_dir>/ld/
+MCU_LDSCRIPT = STM32F072xB
+# startup code to use
+# is should exist in <chibios>/os/common/ports/ARMCMx/compilers/GCC/mk/
+MCU_STARTUP = stm32f0xx
+# it should exist either in <chibios>/os/hal/boards/
+#  or <this_dir>/boards
+BOARD = ST_STM32F072B_DISCOVERY
+# Cortex version
+# Teensy LC is cortex-m0; Teensy 3.x are cortex-m4
+MCU  = cortex-m0
+# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7
+ARMV = 6
+# If you want to be able to jump to bootloader from firmware on STM32 MCUs,
+# set the correct BOOTLOADER_ADDRESS. Either set it here, or define it in
+# ./bootloader_defs.h or in ./boards/<FOO>/bootloader_defs.h (if you have
+# a custom board definition that you plan to reuse).
+# If you're not setting it here, leave it commented out.
+# It is chip dependent, the correct number can be looked up here (page 175):
+# http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf
+# This also requires a patch to chibios:
+#   <tmk_dir>/tmk_core/tool/chibios/ch-bootloader-jump.patch
+#STM32_BOOTLOADER_ADDRESS = 0x1FFFC800
 
 # Build Options
 #   comment out to disable the options.

keyboards/cannonkeys/savage65/rules.mk

@@ -1,5 +1,35 @@
-# MCU name
-MCU = STM32F072
+# project specific files
+# SRC = ssd1306.c
+## chip/board settings
+# the next two should match the directories in
+#  <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)
+MCU_FAMILY = STM32
+MCU_SERIES = STM32F0xx
+# linker script to use
+# it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/
+#  or <this_dir>/ld/
+MCU_LDSCRIPT = STM32F072xB
+# startup code to use
+# is should exist in <chibios>/os/common/ports/ARMCMx/compilers/GCC/mk/
+MCU_STARTUP = stm32f0xx
+# it should exist either in <chibios>/os/hal/boards/
+#  or <this_dir>/boards
+BOARD = ST_STM32F072B_DISCOVERY
+# Cortex version
+# Teensy LC is cortex-m0; Teensy 3.x are cortex-m4
+MCU  = cortex-m0
+# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7
+ARMV = 6
+# If you want to be able to jump to bootloader from firmware on STM32 MCUs,
+# set the correct BOOTLOADER_ADDRESS. Either set it here, or define it in
+# ./bootloader_defs.h or in ./boards/<FOO>/bootloader_defs.h (if you have
+# a custom board definition that you plan to reuse).
+# If you're not setting it here, leave it commented out.
+# It is chip dependent, the correct number can be looked up here (page 175):
+# http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf
+# This also requires a patch to chibios:
+#   <tmk_dir>/tmk_core/tool/chibios/ch-bootloader-jump.patch
+#STM32_BOOTLOADER_ADDRESS = 0x1FFFC800
 
 # Build Options
 #   comment out to disable the options.
@@ -10,6 +40,9 @@ VPATH += keyboards/cannonkeys/stm32f072
 SRC =	keyboard.c \
       led.c
 
+DFU_ARGS = -d 0483:df11 -a 0 -s 0x08000000:leave
+DFU_SUFFIX_ARGS = -v 0483 -p DF11
+
 BOOTMAGIC_ENABLE = lite	# Virtual DIP switch configuration
 MOUSEKEY_ENABLE = yes	# Mouse keys
 EXTRAKEY_ENABLE = yes	# Audio control and System control

keyboards/cannonkeys/stm32f072/keyboard.c

@@ -74,7 +74,6 @@ void matrix_scan_kb(void)
   #ifdef RGBLIGHT_ENABLE
     rgblight_task();
   #endif
-    matrix_scan_user();
 }
 
 bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
@@ -176,4 +175,4 @@ void via_eeprom_reset(void)
     eeconfig_disable();
 }
 
-#endif // VIA_ENABLE
+#endif // VIA_ENABLE

keyboards/cannonkeys/tmov2/rules.mk

@@ -1,5 +1,43 @@
-# MCU name
-MCU = STM32F072
+# project specific files
+# SRC = ssd1306.c
+## chip/board settings
+# the next two should match the directories in
+#  <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)
+MCU_FAMILY = STM32
+MCU_SERIES = STM32F0xx
+# linker script to use
+# it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/
+#  or <this_dir>/ld/
+MCU_LDSCRIPT = STM32F072xB
+# startup code to use
+# is should exist in <chibios>/os/common/ports/ARMCMx/compilers/GCC/mk/
+MCU_STARTUP = stm32f0xx
+# it should exist either in <chibios>/os/hal/boards/
+#  or <this_dir>/boards
+BOARD = ST_STM32F072B_DISCOVERY
+# Cortex version
+# Teensy LC is cortex-m0; Teensy 3.x are cortex-m4
+MCU  = cortex-m0
+# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7
+ARMV = 6
+# If you want to be able to jump to bootloader from firmware on STM32 MCUs,
+# set the correct BOOTLOADER_ADDRESS. Either set it here, or define it in
+# ./bootloader_defs.h or in ./boards/<FOO>/bootloader_defs.h (if you have
+# a custom board definition that you plan to reuse).
+# If you're not setting it here, leave it commented out.
+# It is chip dependent, the correct number can be looked up here (page 175):
+# http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf
+# This also requires a patch to chibios:
+#   <tmk_dir>/tmk_core/tool/chibios/ch-bootloader-jump.patch
+#STM32_BOOTLOADER_ADDRESS = 0x1FFFC800
+
+# Build Options
+#   comment out to disable the options.
+#
+
+# Options to pass to dfu-util when flashing
+DFU_ARGS = -d 0483:df11 -a 0 -s 0x08000000:leave
+DFU_SUFFIX_ARGS = -p DF11 -v 0483
 
 # Build Options
 #   comment out to disable the options.
@@ -10,6 +48,9 @@ VPATH += keyboards/cannonkeys/stm32f072
 SRC =	keyboard.c \
       led.c
 
+DFU_ARGS = -d 0483:df11 -a 0 -s 0x08000000:leave
+DFU_SUFFIX_ARGS = -v 0483 -p DF11
+
 BOOTMAGIC_ENABLE = lite	# Virtual DIP switch configuration
 MOUSEKEY_ENABLE = yes	# Mouse keys
 EXTRAKEY_ENABLE = yes	# Audio control and System control

keyboards/converter/siemens_tastatur/rules.mk

@@ -1,15 +1,43 @@
-# MCU name
-MCU = STM32F103
-
+SRC = matrix.c
 # GENERIC STM32F103C8T6 board - stm32duino bootloader
 OPT_DEFS = -DCORTEX_VTOR_INIT=0x2000
 MCU_LDSCRIPT = STM32F103x8_stm32duino_bootloader
 BOARD = GENERIC_STM32_F103
 
-DFU_ARGS = -d 1eaf:0003 -a2 -R
-DFU_SUFFIX_ARGS = -v 1eaf -p 0003
+# OPT_DEFS =
+# MCU_LDSCRIPT = STM32F103x8
+# BOARD = GENERIC_STM32_F103
 
-SRC = matrix.c
+## chip/board settings
+# the next two should match the directories in
+#  <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)
+MCU_FAMILY = STM32
+MCU_SERIES = STM32F1xx
+# linker script to use
+# it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/
+#  or <this_dir>/ld/
+# startup code to use
+# is should exist in <chibios>/os/common/ports/ARMCMx/compilers/GCC/mk/
+MCU_STARTUP = stm32f1xx
+# it should exist either in <chibios>/os/hal/boards/
+#  or <this_dir>/boards
+# Cortex version
+# Teensy LC is cortex-m0; Teensy 3.x are cortex-m4
+MCU  = cortex-m3
+# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7
+ARMV = 7
+# If you want to be able to jump to bootloader from firmware on STM32 MCUs,
+# set the correct BOOTLOADER_ADDRESS. Either set it here, or define it in
+# ./bootloader_defs.h or in ./boards/<FOO>/bootloader_defs.h (if you have
+# a custom board definition that you plan to reuse).
+# If you're not setting it here, leave it commented out.
+# It is chip dependent, the correct number can be looked up here (page 175):
+# http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf
+# This also requires a patch to chibios:
+#   <tmk_dir>/tmk_core/tool/chibios/ch-bootloader-jump.patch
+#STM32_BOOTLOADER_ADDRESS = 0x1FFFC800
+
+DFU_ARGS = -d 1eaf:0003 -a 2
 
 #BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration
 MOUSEKEY_ENABLE = yes   # Mouse keys

keyboards/converter/usb_usb/keymaps/ble/keymap.c

@@ -17,7 +17,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #include QMK_KEYBOARD_H
 
-const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+const uint16_t keymaps[][MATRIX_ROWS][MATRIX_COLS] PROGMEM = {
     /* 0: plain Qwerty without layer switching
      *         ,---------------. ,---------------. ,---------------.
      *         |F13|F14|F15|F16| |F17|F18|F19|F20| |F21|F22|F23|F24|
@@ -46,3 +46,19 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
     KC_LCTL, KC_LGUI, KC_LALT, KC_MHEN, KC_HANJ,         KC_SPC,         KC_HAEN, KC_HENK, KC_KANA, KC_RALT, KC_RGUI, KC_APP,  KC_RCTL,     KC_LEFT, KC_DOWN, KC_RGHT,    KC_P0,            KC_PDOT, KC_PENT,    KC_FIND, KC_CUT
     ),
 };
+
+void matrix_init_user(void) {
+
+}
+
+void matrix_scan_user(void) {
+
+}
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+  return true;
+}
+
+void led_set_user(uint8_t usb_led) {
+
+}

keyboards/converter/usb_usb/keymaps/default/keymap.c

@@ -17,7 +17,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #include QMK_KEYBOARD_H
 
-const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+const uint16_t keymaps[][MATRIX_ROWS][MATRIX_COLS] PROGMEM = {
     /* 0: plain Qwerty without layer switching
      *         ,---------------. ,---------------. ,---------------.
      *         |F13|F14|F15|F16| |F17|F18|F19|F20| |F21|F22|F23|F24|
@@ -55,3 +55,19 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
     ______,  ______,  ______,  ______,  ______,         ______,           ______, ______,  ______, ______, ______, ______, ______,     ______,______,______,    ______,       ______,______,    ______,______
     ),
 };
+
+void matrix_init_user(void) {
+
+}
+
+void matrix_scan_user(void) {
+
+}
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+  return true;
+}
+
+void led_set_user(uint8_t usb_led) {
+
+}

keyboards/crkbd/keymaps/curry/config.h

@@ -6,7 +6,23 @@
 #define OLED_DISABLE_TIMEOUT
 #define TAPPING_TERM_PER_KEY
 
-#if defined(RGB_MATRIX_ENABLE)
+#ifdef RGBLIGHT_ENABLE
+#    undef RGBLED_NUM
+#    define RGBLED_NUM 27
+
+#    define RGBLIGHT_HUE_STEP 8
+#    define RGBLIGHT_SAT_STEP 8
+#    define RGBLIGHT_VAL_STEP 5
+#    define RGBLIGHT_LIMIT_VAL 120
+#endif
+
+#ifdef RGB_MATRIX_ENABLE
+#    define RGB_MATRIX_KEYPRESSES  // reacts to keypresses
+// #   define RGB_MATRIX_KEYRELEASES // reacts to keyreleases (instead of keypresses)
+// #   define RGB_DISABLE_AFTER_TIMEOUT 0 // number of ticks to wait until disabling effects
+#    define RGB_DISABLE_WHEN_USB_SUSPENDED true  // turn off effects when suspended
+// #   define RGB_MATRIX_LED_PROCESS_LIMIT (DRIVER_LED_TOTAL + 4) / 5 // limits the number of LEDs to process in an animation per task run (increases keyboard responsiveness)
+// #   define RGB_MATRIX_LED_FLUSH_LIMIT 16 // limits in milliseconds how frequently an animation will update the LEDs. 16 (16ms) is equivalent to limiting to 60fps (increases keyboard responsiveness)
 #    define RGB_MATRIX_MAXIMUM_BRIGHTNESS 120  // limits maximum brightness of LEDs to 200 out of 255. If not defined maximum brightness is set to 255
 #    define RGB_MATRIX_HUE_STEP 8
 #    define RGB_MATRIX_SAT_STEP 8

keyboards/crkbd/keymaps/curry/keymap.c

@@ -6,10 +6,10 @@
         K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A  \
     ) \
     LAYOUT_wrapper( \
-        KC_TAB,  K01, K02, K03, K04, K05,      K06, K07, K08, K09, K0A, KC_MINS, \
-        MT_ESC,  K11, K12, K13, K14, K15,      K16, K17, K18, K19, K1A, KC_QUOT, \
+        KC_GESC, K01, K02, K03, K04, K05,      K06, K07, K08, K09, K0A, KC_MINS, \
+        M_LCTL,  K11, K12, K13, K14, K15,      K16, K17, K18, K19, K1A, M_RALT,  \
         OS_LSFT, K21, K22, K23, K24, K25,      K26, K27, K28, K29, K2A, OS_RSFT, \
-                KC_LEAD,OS_LALT, SP_LWER,      ET_RAIS, KC_BSPC, KC_RGUI         \
+                KC_GRV, OS_LALT, SP_LWER,     ET_RAIS, KC_BSPC, OS_RGUI                                      \
     )
 #define LAYOUT_crkbd_base_wrapper(...)       LAYOUT_crkbd_base(__VA_ARGS__)
 
@@ -32,12 +32,6 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
         _________________DVORAK_L3_________________, _________________DVORAK_R3_________________
     ),
 
-    [_WORKMAN] = LAYOUT_crkbd_base_wrapper(
-        _________________WORKMAN_L1________________, _________________WORKMAN_R1________________,
-        _________________WORKMAN_L2________________, _________________WORKMAN_R2________________,
-        _________________WORKMAN_L3________________, _________________WORKMAN_R3________________
-    ),
-
     [_MODS] = LAYOUT_wrapper(
         _______, ___________________BLANK___________________,       ___________________BLANK___________________, _______,
         _______, ___________________BLANK___________________,       ___________________BLANK___________________, _______,
@@ -46,8 +40,8 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
     ),
 
     [_LOWER] = LAYOUT_wrapper(
-        KC_F11,  _________________LOWER_L1__________________,       _________________LOWER_R1__________________, KC_F12,
-        KC_GRV,  _________________LOWER_L2__________________,       _________________LOWER_R2__________________, KC_PIPE,
+        _______, _________________LOWER_L1__________________,       _________________LOWER_R1__________________, KC_PIPE,
+        KC_F11,  _________________LOWER_L2__________________,       _________________LOWER_R2__________________, KC_F12,
         _______, _________________LOWER_L3__________________,       _________________LOWER_R3__________________, _______,
                                    _______, _______, _______,       _______, _______, _______
     ),
@@ -60,7 +54,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
     ),
 
     [_ADJUST] = LAYOUT_wrapper( \
-        KC_MAKE, _________________ADJUST_L1_________________,       _________________ADJUST_R1_________________, KC_RST,
+        KC_MAKE, _________________ADJUST_L1_________________,       _________________ADJUST_R1_________________, KC_RESET,
         VRSN,    _________________ADJUST_L2_________________,       _________________ADJUST_R2_________________, EEP_RST,
         MG_NKRO, _________________ADJUST_L3_________________,       _________________ADJUST_R3_________________, RGB_IDL,
                                    _______, _______, _______,       _______, TG_MODS, _______

keyboards/crkbd/keymaps/curry/rules.mk

@@ -2,15 +2,22 @@
 #   change to "no" to disable the options, or define them in the Makefile in
 #   the appropriate keymap folder that will get included automatically
 #
-BOOTMAGIC_ENABLE        = no
-MOUSEKEY_ENABLE         = no
-CONSOLE_ENABLE          = no
-COMMAND_ENABLE          = no
-
-RGBLIGHT_ENABLE         = no
-RGB_MATRIX_ENABLE       = WS2812
-
-OLED_DRIVER_ENABLE      = yes
-
-BOOTLOADER              = atmel-dfu
-SPLIT_TRANSPORT         = mirror
+BOOTMAGIC_ENABLE            = no  # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE             = no  # Mouse keys(+4700)
+EXTRAKEY_ENABLE             = yes # Audio control and System control(+450)
+CONSOLE_ENABLE              = no  # Console for debug(+400)
+COMMAND_ENABLE              = no  # Commands for debug and configuration
+NKRO_ENABLE                 = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+BACKLIGHT_ENABLE            = no  # Enable keyboard backlight functionality
+MIDI_ENABLE                 = no  # MIDI controls
+AUDIO_ENABLE                = no  # Audio output on port C6
+UNICODE_ENABLE              = no  # Unicode
+BLUETOOTH_ENABLE            = no  # Enable Bluetooth with the Adafruit EZ-Key HID
+RGBLIGHT_ENABLE             = no  # Enable WS2812 RGB underlight.
+SWAP_HANDS_ENABLE           = no  # Enable one-hand typing
+RGB_MATRIX_ENABLE           = WS2812
+TAP_DANCE_ENABLE            = yes      # Enable Tap Dance.
+OLED_DRIVER_ENABLE          = yes
+BOOTLOADER                  = atmel-dfu
+SLEEP_LED_ENABLE            = no    # Breathing sleep LED during USB suspend
+SPLIT_TRANSPORT             = mirror

keyboards/crkbd/keymaps/dsanchezseco/config.h

@@ -36,7 +36,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 //disable effects
 #define DISABLE_RGB_MATRIX_ALPHAS_MODS         // Static dual hue speed is hue for secondary hue
 #define DISABLE_RGB_MATRIX_GRADIENT_UP_DOWN    // Static gradient top to bottom speed controls how much gradient changes
-#define DISABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT    // Static gradient left to right speed controls how much gradient changes
 #define DISABLE_RGB_MATRIX_BAND_SAT        // Single hue band fading saturation scrolling left to right
 #define DISABLE_RGB_MATRIX_BAND_VAL        // Single hue band fading brightness scrolling left to right
 #define DISABLE_RGB_MATRIX_BAND_PINWHEEL_SAT   // Single hue 3 blade spinning pinwheel fades saturation

keyboards/crkbd/keymaps/kidbrazil/README.md

@@ -1,6 +1,6 @@
 # KidBrazil's custom CRKBD Layout
 
-![Loose Transistor Crkbd](https://user-images.githubusercontent.com/4823043/71268460-0862c000-231b-11ea-8f32-2fe8da4d348a.jpg)
+![Crkbd](https://user-images.githubusercontent.com/736191/40575636-6fba63a4-6123-11e8-9ca0-3f990f1f9f4c.jpg)
 
 This is a simple layout that I use for both programming and gaming. It is very
 closely based on the original CRKBD layout with some modifications to the
@@ -45,19 +45,8 @@ customize this with showing layer and USB information. I also tried my best to
 get a dormant / sleep state going but it is hit or miss and often only works on
 the master hand.
 
-## OLED & RGB Matrix timeout
-This keymap will set a automated timeout system for the OLED screen and the RGB
-matrix. After 3 minutes or so the LED screen will display the logo on both
-halves and 5 minutes after that both the LED and the Matrix will be switched
-off.
-
-Once a user hits the keys again, the LED matrix will turn back on unless the
-user has disabled it via RGB_TOG.
-
-## Flashing
-To flash this on your CRKBD simply use the `make crkbd:kidbrazil:flash`
-command.
-
 ### TODO
+- Fix OLED and Backlight so they turn off when the computer sleeps, currently
+  only the left hand does that and the LEDs still stay on.
 - Wait for Spit_common to be implemented in CRKBD and revisit the special color
   layers and animations

keyboards/crkbd/keymaps/kidbrazil/keymap.c

@@ -4,10 +4,8 @@
 extern uint8_t is_master;
 // Oled timer similar to Drashna's
 static uint32_t oled_timer = 0;
-// Boolean to store LED state
-bool user_led_enabled = true;
-// Boolean to store the master LED clear so it only runs once.
-bool master_oled_cleared = false;
+// Boolean to store
+bool eeprom_oled_enabled = false;
 
 // [CRKBD layers Init] -------------------------------------------------------//
 enum crkbd_layers {
@@ -56,39 +54,19 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
     )
 };
 
-// [Post Init] --------------------------------------------------------------//
-void keyboard_post_init_user(void) {
-    // Set RGB to known state
-    rgb_matrix_enable_noeeprom();
-    rgb_matrix_set_color_all(RGB_GREEN);
-    user_led_enabled = true;
+//int RGB_current_mode;
 
-}
 // [Process User Input] ------------------------------------------------------//
 bool process_record_user(uint16_t keycode, keyrecord_t *record) {
-    switch (keycode) {
-      case RGB_TOG:
-        if (record->event.pressed) {
-            // Toggle matrix on key press
-            user_led_enabled ? rgb_matrix_disable_noeeprom() : rgb_matrix_enable_noeeprom();
-        } else {
-            // Flip User_led_enabled variable on key release
-            user_led_enabled = !user_led_enabled;
-        }
-        return false; // Skip all further processing of this key
-      default:
-          // Use process_record_keymap to reset timer on all other keypresses
-          if (record->event.pressed) {
-              #ifdef OLED_DRIVER_ENABLE
-                  oled_timer = timer_read32();
-              #endif
-              // Restore LEDs if they are enabled by user
-              if (user_led_enabled) {
-                  rgb_matrix_enable_noeeprom();
-              }
-          }
-          return true;
+    // Use process_record_keymap to reset timer on keypress
+    if (record->event.pressed) {
+        #ifdef OLED_DRIVER_ENABLE
+            oled_timer = timer_read32();
+        #endif
+        // Restore LEDs if they are enabled in eeprom
+        rgb_matrix_enable_noeeprom();
     }
+    return true;
 }
 
 // [OLED Configuration] ------------------------------------------------------//
@@ -202,47 +180,35 @@ void render_master_oled(void) {
     }
 }
 
-// Slave OLED scren (Right Hand)
+// lave OLED scren (Right Hand)
 void render_slave_oled(void) {
     render_logo();
 }
 
 // {OLED Task} -----------------------------------------------//
 void oled_task_user(void) {
-    if (timer_elapsed32(oled_timer) > 80000 && timer_elapsed32(oled_timer) < 479999) {
-        // Render logo on both halves before full timeout
-        if (is_master && !master_oled_cleared) {
-            // Clear master OLED once so the logo renders properly
-            oled_clear();
-            master_oled_cleared = true;
-        }
-        render_logo();
-        return;
-    }
-    // Drashna style timeout for LED and OLED Roughly 8mins
-    else if (timer_elapsed32(oled_timer) > 480000) {
-        oled_off();
-        rgb_matrix_disable_noeeprom();
-        return;
-    }
-    else {
-        oled_on();
-        // Reset OLED Clear flag
-        master_oled_cleared = false;
-        // Show logo when USB dormant
-        switch (USB_DeviceState) {
-            case DEVICE_STATE_Unattached:
-            case DEVICE_STATE_Powered:
-            case DEVICE_STATE_Suspended:
-                render_logo();
-                break;
-            default:
-                if (is_master) {
-                    render_master_oled();
-                } else {
-                    render_slave_oled();
-                }
-        }
-    }
+      // Drashna style timeout for LED and OLED Roughly 8mins
+      if (timer_elapsed32(oled_timer) > 480000) {
+          oled_off();
+          rgb_matrix_disable_noeeprom();
+          return;
+      }
+      else {
+          oled_on();
+      }
+      // Show logo when USB dormant
+      switch (USB_DeviceState) {
+          case DEVICE_STATE_Unattached:
+          case DEVICE_STATE_Powered:
+          case DEVICE_STATE_Suspended:
+            render_logo();
+            break;
+          default:
+            if (is_master) {
+                render_master_oled();
+            } else {
+                render_slave_oled();
+            }
+      }
 }
 #endif

keyboards/db/db63/README.md

@@ -1,21 +0,0 @@
-# DB63
-
-A 65% keyboard hotswap with RGB that runs ps2avrgb natively, with USB C, RGB underglow and backlight.
-
-* Keyboard Maintainer: QMK Community
-* Hardware Supported: DB63 (ATmega32A)
-* [Keyboard layout](http://www.keyboard-layout-editor.com/#/gists/dadea703fc8bfc87dc7c480de9f3ef38)
-
-Make example for this keyboard (after setting up your build environment):
-
-    make db/db63:default
-
-Flashing example for this keyboard ([after setting up the bootloadHID flashing environment](https://docs.qmk.fm/#/flashing_bootloadhid))
-
-    make db/db63:default:flash
-
-**Reset Key**: Hold down the key located at *K00*, commonly programmed as *Escape* while plugging in the keyboard. (*All backlight LEDs will flash which indicate the board is in bootloader mode.*)
-
-**Tips**: Another trick to enable the board in reset mode is using BootMapper Client->Options->Set Bootloader. (*This is only available for the first time, before flashing QMK Firmware.*)
-
-See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

keyboards/db/db63/config.h

@@ -1,42 +0,0 @@
-/*
-Copyright 2020 Hung DO <hungdohuy@gmail.com>
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program.  If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#pragma once
-
-#define VENDOR_ID       0xFAAD
-#define PRODUCT_ID      0x422D
-#define DEVICE_VER      0x0200
-// You can edit those at usbconfig.h about line 250. These values will
-// unforunatly be ignored so far
-#define MANUFACTURER    HNB
-#define PRODUCT         DB63v1 Hotswap
-
-#define MATRIX_ROWS 6
-#define MATRIX_COLS 14
-
-#define MATRIX_ROW_PINS { B0, B1, B2, B3, B4, B5 }
-#define MATRIX_COL_PINS { A0, A1, A2, A3, A4, A5, A6, A7, C7, C6, C5, C4, C3, C2 }
-#define UNUSED_PINS
-
-#define RGBLED_NUM 18
-#define RGBLIGHT_ANIMATIONS
-
-#define NO_UART 1
-
-#define BACKLIGHT_PIN D4
-#define BACKLIGHT_LEVELS 3
-

keyboards/db/db63/db63.c

@@ -1,17 +0,0 @@
-/* Copyright 2019 MechMerlin
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-
-#include "db63.h"

keyboards/db/db63/db63.h

@@ -1,49 +0,0 @@
-/*
-Copyright 2020 Hung DO <hungdohuy@gmail.com>
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program.  If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#pragma once
-
-#include "quantum.h"
-#define _x_ KC_NO
-
-/* This a shortcut to help you visually see your layout.
- *
- * The first section contains all of the arguments representing the physical
- * layout of the board and position of the keys.
- *
- * The second converts the arguments into a two-dimensional array which
- * represents the switch matrix.
- * MATRIX_ROW_PINS { B0, B1, B2, B3, B4, B5 }
- * MATRIX_COL_PINS { A0, A1, A2, A3, A4, A5, A6, A7, C7, C6, C5, C4, C3, C2 }
- *
- */
-
-#define LAYOUT( \
-    k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c,   k0d, \
-    k10 , k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c,  k1d, \
-    k20  , k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b,   k2c, \
-    k30   , k31, k32, k33, k34, k35, k36, k37, k38, k39,    k3a, k3b,  k3c, \
-    k40 , k41 , k42 ,          k43              , k44, k45, k46, k47 , k48 \
-) { \
-    { k00, _x_, _x_, _x_, _x_, _x_, _x_, _x_, _x_, _x_, _x_, _x_, _x_, _x_ }, \
-    { _x_, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d }, \
-    { k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d }, \
-    { k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k46 }, \
-    { k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3c, k3a, k47, _x_ }, \
-    { k40, k41, k42, k43, k45, _x_, _x_, k44, _x_, _x_, _x_, k3b, _x_, k48 }  \
-}
-

keyboards/db/db63/info.json

@@ -1,18 +0,0 @@
-{
-    "keyboard_name": "db63",
-    "url": "http://www.keyboard-layout-editor.com/#/gists/dadea703fc8bfc87dc7c480de9f3ef38",
-    "maintainer": "QMK Community",
-    "width": 15,
-    "height": 5,
-    "layouts": {
-        "LAYOUT": {
-            "layout": [
-                { "label": "~", "x": 0, "y": 0 }, { "label": "!", "x": 1, "y": 0 }, { "label": "@", "x": 2, "y": 0 }, { "label": "#", "x": 3, "y": 0 }, { "label": "$", "x": 4, "y": 0 }, { "label": "%", "x": 5, "y": 0 }, { "label": "^", "x": 6, "y": 0 }, { "label": "&", "x": 7, "y": 0 }, { "label": "*", "x": 8, "y": 0 }, { "label": "(", "x": 9, "y": 0 }, { "label": ")", "x": 10, "y": 0 }, { "label": "_", "x": 11, "y": 0 }, { "label": "+", "x": 12, "y": 0 }, { "label": "Backspace", "x": 13, "y": 0, "w": 2 },
-                { "label": "Tab", "x": 0, "y": 1, "w": 1.5 }, { "label": "Q", "x": 1.5, "y": 1 }, { "label": "W", "x": 2.5, "y": 1 }, { "label": "E", "x": 3.5, "y": 1 }, { "label": "R", "x": 4.5, "y": 1 }, { "label": "T", "x": 5.5, "y": 1 }, { "label": "Y", "x": 6.5, "y": 1 }, { "label": "U", "x": 7.5, "y": 1 }, { "label": "I", "x": 8.5, "y": 1 }, { "label": "O", "x": 9.5, "y": 1 }, { "label": "P", "x": 10.5, "y": 1 }, { "label": "{", "x": 11.5, "y": 1 }, { "label": "}", "x": 12.5, "y": 1 }, { "label": "|", "x": 13.5, "y": 1, "w": 1.5 },
-                { "label": "Fn3", "x": 0, "y": 2, "w": 1.75 }, { "label": "A", "x": 1.75, "y": 2 }, { "label": "S", "x": 2.75, "y": 2 }, { "label": "D", "x": 3.75, "y": 2 }, { "label": "F", "x": 4.75, "y": 2 }, { "label": "G", "x": 5.75, "y": 2 }, { "label": "H", "x": 6.75, "y": 2 }, { "label": "J", "x": 7.75, "y": 2 }, { "label": "K", "x": 8.75, "y": 2 }, { "label": "L", "x": 9.75, "y": 2 }, { "label": ":", "x": 10.75, "y": 2 }, { "label": "\"", "x": 11.75, "y": 2 }, { "label": "Enter", "x": 12.75, "y": 2, "w": 2.25 },
-                { "label": "Shift", "x": 0, "y": 3, "w": 2.25 }, { "label": "Z", "x": 2.25, "y": 3 }, { "label": "X", "x": 3.25, "y": 3 }, { "label": "C", "x": 4.25, "y": 3 }, { "label": "V", "x": 5.25, "y": 3 }, { "label": "B", "x": 6.25, "y": 3 }, { "label": "N", "x": 7.25, "y": 3 }, { "label": "M", "x": 8.25, "y": 3 }, { "label": "<", "x": 9.25, "y": 3 }, { "label": ">", "x": 10.25, "y": 3 }, { "label": "Shift", "x": 11.25, "y": 3, "w": 1.75 }, { "label": "Up", "x": 13, "y": 3 }, { "label": "Fn2", "x": 14, "y": 3 },
-                { "label": "Ctrl", "x": 0, "y": 4, "w": 1.25 }, { "label": "Alt", "x": 1.25, "y": 4, "w": 1.25 }, { "label": "Win", "x": 2.5, "y": 4, "w": 1.25 }, { "label": "Space", "x": 3.75, "y": 4, "w": 6.25 }, { "label": "?", "x": 10, "y": 4 }, { "label": "Fn1", "x": 11, "y": 4 }, { "label": "Left", "x": 12, "y": 4 }, { "label": "Down", "x": 13, "y": 4 }, { "label": "Right", "x": 14, "y": 4 }
-            ]
-        }
-    }
-}

keyboards/db/db63/keymaps/default/keymap.c

@@ -1,60 +0,0 @@
-/*
-Copyright 2020 Hung DO <hungdohuy@gmail.com>
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program.  If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#include QMK_KEYBOARD_H
-
-const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-    [0] = LAYOUT(
-        KC_GESC, KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_BSPC,
-        KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC, KC_BSLS,
-        MO(3),   KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT,          KC_ENT,
-        KC_LSFT,          KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_RSFT, KC_UP,   MO(2),
-        KC_LCTL, KC_LALT, KC_LGUI,                            KC_SPC,                    KC_SLSH, MO(1),   KC_LEFT, KC_DOWN, KC_RGHT
-    ),
-    [1] = LAYOUT(
-        KC_GESC, KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_BSPC,
-        KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC, KC_BSLS,
-        KC_CAPS, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT,          _______,
-        KC_LSFT,          KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_RSFT, KC_UP,   XXXXXXX,
-        KC_LCTL, KC_LALT, KC_LGUI,                            KC_SPC,                    _______, MO(1),   KC_LEFT, KC_DOWN, KC_RGHT
-    ),
-    [2] = LAYOUT(
-        KC_GESC, RGB_M_P, RGB_M_B, RGB_M_R, RGB_M_SW, RGB_M_SN, RGB_M_K, RGB_M_X, RGB_M_G, RGB_M_T, RGB_TOG, RGB_VAD, RGB_VAI, KC_BSPC,
-        KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,     KC_T,     KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC, KC_BSLS,
-        XXXXXXX, KC_A,    KC_S,    KC_D,    KC_F,     KC_G,     KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT,          _______,
-        KC_LSFT,          KC_Z,    KC_X,    KC_C,     KC_V,     KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_RSFT, KC_UP,   MO(2),
-        KC_LCTL, KC_LALT, KC_LGUI,                              KC_SPC,                    _______, XXXXXXX, KC_LEFT, KC_DOWN, KC_RGHT
-    ),
-    [3] = LAYOUT(
-        _______, _______, _______, _______, _______, _______, _______, _______, BL_STEP, BL_BRTG, BL_TOGG, BL_DEC,  BL_INC,  _______,
-        KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC, KC_BSLS,
-        MO(3),   KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT,          RESET,
-        KC_LSFT,          KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_RSFT, KC_UP,   XXXXXXX,
-        KC_LCTL, KC_LALT, KC_LGUI,                            KC_SPC,                    _______, XXXXXXX, KC_LEFT, KC_DOWN, KC_RGHT
-    ),
-};
-
-bool led_update_user(led_t led_state) {
-    if (led_state.caps_lock) {
-        rgblight_sethsv(HSV_CYAN);
-        writePinHigh(D1);
-    } else {
-        rgblight_sethsv(HSV_GREEN);
-        writePinLow(D1);
-    }
-    return false;
-}

keyboards/db/db63/rules.mk

@@ -1,24 +0,0 @@
-# MCU name
-MCU = atmega32a
-
-# Bootloader selection
-#   Teensy       halfkay
-#   Pro Micro    caterina
-#   Atmel DFU    atmel-dfu
-#   LUFA DFU     lufa-dfu
-#   QMK DFU      qmk-dfu
-#   ATmega32A    bootloadHID
-#   ATmega328P   USBasp
-BOOTLOADER = bootloadHID
-
-# build options
-BOOTMAGIC_ENABLE = no
-MOUSEKEY_ENABLE = yes
-EXTRAKEY_ENABLE = yes
-CONSOLE_ENABLE = no
-COMMAND_ENABLE = yes
-BACKLIGHT_ENABLE = yes
-RGBLIGHT_ENABLE = yes
-WS2812_DRIVER = i2c
-
-OPT_DEFS = -DDEBUG_LEVEL=0

keyboards/db/db63/usbconfig.h

@@ -1,383 +0,0 @@
-/* Name: usbconfig.h
- * Project: V-USB, virtual USB port for Atmel's(r) AVR(r) microcontrollers
- * Author: Christian Starkjohann
- * Creation Date: 2005-04-01
- * Tabsize: 4
- * Copyright: (c) 2005 by OBJECTIVE DEVELOPMENT Software GmbH
- * License: GNU GPL v2 (see License.txt), GNU GPL v3 or proprietary (CommercialLicense.txt)
- * This Revision: $Id: usbconfig-prototype.h 785 2010-05-30 17:57:07Z cs $
- */
-
-#pragma once
-
-#include "config.h"
-
-/*
-General Description:
-This file is an example configuration (with inline documentation) for the USB
-driver. It configures V-USB for USB D+ connected to Port D bit 2 (which is
-also hardware interrupt 0 on many devices) and USB D- to Port D bit 4. You may
-wire the lines to any other port, as long as D+ is also wired to INT0 (or any
-other hardware interrupt, as long as it is the highest level interrupt, see
-section at the end of this file).
-*/
-
-/* ---------------------------- Hardware Config ---------------------------- */
-
-#define USB_CFG_IOPORTNAME      D
-/* This is the port where the USB bus is connected. When you configure it to
- * "B", the registers PORTB, PINB and DDRB will be used.
- */
-#define USB_CFG_DMINUS_BIT      3
-/* This is the bit number in USB_CFG_IOPORT where the USB D- line is connected.
- * This may be any bit in the port.
- */
-#define USB_CFG_DPLUS_BIT       2
-/* This is the bit number in USB_CFG_IOPORT where the USB D+ line is connected.
- * This may be any bit in the port. Please note that D+ must also be connected
- * to interrupt pin INT0! [You can also use other interrupts, see section
- * "Optional MCU Description" below, or you can connect D- to the interrupt, as
- * it is required if you use the USB_COUNT_SOF feature. If you use D- for the
- * interrupt, the USB interrupt will also be triggered at Start-Of-Frame
- * markers every millisecond.]
- */
-#define USB_CFG_CLOCK_KHZ       (F_CPU/1000)
-/* Clock rate of the AVR in kHz. Legal values are 12000, 12800, 15000, 16000,
- * 16500, 18000 and 20000. The 12.8 MHz and 16.5 MHz versions of the code
- * require no crystal, they tolerate +/- 1% deviation from the nominal
- * frequency. All other rates require a precision of 2000 ppm and thus a
- * crystal!
- * Since F_CPU should be defined to your actual clock rate anyway, you should
- * not need to modify this setting.
- */
-#define USB_CFG_CHECK_CRC       0
-/* Define this to 1 if you want that the driver checks integrity of incoming
- * data packets (CRC checks). CRC checks cost quite a bit of code size and are
- * currently only available for 18 MHz crystal clock. You must choose
- * USB_CFG_CLOCK_KHZ = 18000 if you enable this option.
- */
-
-/* ----------------------- Optional Hardware Config ------------------------ */
-
-/* #define USB_CFG_PULLUP_IOPORTNAME   D */
-/* If you connect the 1.5k pullup resistor from D- to a port pin instead of
- * V+, you can connect and disconnect the device from firmware by calling
- * the macros usbDeviceConnect() and usbDeviceDisconnect() (see usbdrv.h).
- * This constant defines the port on which the pullup resistor is connected.
- */
-/* #define USB_CFG_PULLUP_BIT          4 */
-/* This constant defines the bit number in USB_CFG_PULLUP_IOPORT (defined
- * above) where the 1.5k pullup resistor is connected. See description
- * above for details.
- */
-
-/* --------------------------- Functional Range ---------------------------- */
-
-#define USB_CFG_HAVE_INTRIN_ENDPOINT    1
-/* Define this to 1 if you want to compile a version with two endpoints: The
- * default control endpoint 0 and an interrupt-in endpoint (any other endpoint
- * number).
- */
-#define USB_CFG_HAVE_INTRIN_ENDPOINT3   1
-/* Define this to 1 if you want to compile a version with three endpoints: The
- * default control endpoint 0, an interrupt-in endpoint 3 (or the number
- * configured below) and a catch-all default interrupt-in endpoint as above.
- * You must also define USB_CFG_HAVE_INTRIN_ENDPOINT to 1 for this feature.
- */
-#define USB_CFG_EP3_NUMBER              3
-/* If the so-called endpoint 3 is used, it can now be configured to any other
- * endpoint number (except 0) with this macro. Default if undefined is 3.
- */
-/* #define USB_INITIAL_DATATOKEN           USBPID_DATA1 */
-/* The above macro defines the startup condition for data toggling on the
- * interrupt/bulk endpoints 1 and 3. Defaults to USBPID_DATA1.
- * Since the token is toggled BEFORE sending any data, the first packet is
- * sent with the oposite value of this configuration!
- */
-#define USB_CFG_IMPLEMENT_HALT          0
-/* Define this to 1 if you also want to implement the ENDPOINT_HALT feature
- * for endpoint 1 (interrupt endpoint). Although you may not need this feature,
- * it is required by the standard. We have made it a config option because it
- * bloats the code considerably.
- */
-#define USB_CFG_SUPPRESS_INTR_CODE      0
-/* Define this to 1 if you want to declare interrupt-in endpoints, but don't
- * want to send any data over them. If this macro is defined to 1, functions
- * usbSetInterrupt() and usbSetInterrupt3() are omitted. This is useful if
- * you need the interrupt-in endpoints in order to comply to an interface
- * (e.g. HID), but never want to send any data. This option saves a couple
- * of bytes in flash memory and the transmit buffers in RAM.
- */
-#define USB_CFG_IS_SELF_POWERED         0
-/* Define this to 1 if the device has its own power supply. Set it to 0 if the
- * device is powered from the USB bus.
- */
-#define USB_CFG_IMPLEMENT_FN_WRITE      1
-/* Set this to 1 if you want usbFunctionWrite() to be called for control-out
- * transfers. Set it to 0 if you don't need it and want to save a couple of
- * bytes.
- */
-#define USB_CFG_IMPLEMENT_FN_READ       0
-/* Set this to 1 if you need to send control replies which are generated
- * "on the fly" when usbFunctionRead() is called. If you only want to send
- * data from a static buffer, set it to 0 and return the data from
- * usbFunctionSetup(). This saves a couple of bytes.
- */
-#define USB_CFG_IMPLEMENT_FN_WRITEOUT   0
-/* Define this to 1 if you want to use interrupt-out (or bulk out) endpoints.
- * You must implement the function usbFunctionWriteOut() which receives all
- * interrupt/bulk data sent to any endpoint other than 0. The endpoint number
- * can be found in 'usbRxToken'.
- */
-#define USB_CFG_HAVE_FLOWCONTROL        0
-/* Define this to 1 if you want flowcontrol over USB data. See the definition
- * of the macros usbDisableAllRequests() and usbEnableAllRequests() in
- * usbdrv.h.
- */
-#define USB_CFG_DRIVER_FLASH_PAGE       0
-/* If the device has more than 64 kBytes of flash, define this to the 64 k page
- * where the driver's constants (descriptors) are located. Or in other words:
- * Define this to 1 for boot loaders on the ATMega128.
- */
-#define USB_CFG_LONG_TRANSFERS          0
-/* Define this to 1 if you want to send/receive blocks of more than 254 bytes
- * in a single control-in or control-out transfer. Note that the capability
- * for long transfers increases the driver size.
- */
-/* #define USB_RX_USER_HOOK(data, len)     if(usbRxToken == (uchar)USBPID_SETUP) blinkLED(); */
-/* This macro is a hook if you want to do unconventional things. If it is
- * defined, it's inserted at the beginning of received message processing.
- * If you eat the received message and don't want default processing to
- * proceed, do a return after doing your things. One possible application
- * (besides debugging) is to flash a status LED on each packet.
- */
-/* #define USB_RESET_HOOK(resetStarts)     if(!resetStarts){hadUsbReset();} */
-/* This macro is a hook if you need to know when an USB RESET occurs. It has
- * one parameter which distinguishes between the start of RESET state and its
- * end.
- */
-/* #define USB_SET_ADDRESS_HOOK()              hadAddressAssigned(); */
-/* This macro (if defined) is executed when a USB SET_ADDRESS request was
- * received.
- */
-#define USB_COUNT_SOF                   1
-/* define this macro to 1 if you need the global variable "usbSofCount" which
- * counts SOF packets. This feature requires that the hardware interrupt is
- * connected to D- instead of D+.
- */
-/* #ifdef __ASSEMBLER__
- * macro myAssemblerMacro
- *     in      YL, TCNT0
- *     sts     timer0Snapshot, YL
- *     endm
- * #endif
- * #define USB_SOF_HOOK                    myAssemblerMacro
- * This macro (if defined) is executed in the assembler module when a
- * Start Of Frame condition is detected. It is recommended to define it to
- * the name of an assembler macro which is defined here as well so that more
- * than one assembler instruction can be used. The macro may use the register
- * YL and modify SREG. If it lasts longer than a couple of cycles, USB messages
- * immediately after an SOF pulse may be lost and must be retried by the host.
- * What can you do with this hook? Since the SOF signal occurs exactly every
- * 1 ms (unless the host is in sleep mode), you can use it to tune OSCCAL in
- * designs running on the internal RC oscillator.
- * Please note that Start Of Frame detection works only if D- is wired to the
- * interrupt, not D+. THIS IS DIFFERENT THAN MOST EXAMPLES!
- */
-#define USB_CFG_CHECK_DATA_TOGGLING     0
-/* define this macro to 1 if you want to filter out duplicate data packets
- * sent by the host. Duplicates occur only as a consequence of communication
- * errors, when the host does not receive an ACK. Please note that you need to
- * implement the filtering yourself in usbFunctionWriteOut() and
- * usbFunctionWrite(). Use the global usbCurrentDataToken and a static variable
- * for each control- and out-endpoint to check for duplicate packets.
- */
-#define USB_CFG_HAVE_MEASURE_FRAME_LENGTH   0
-/* define this macro to 1 if you want the function usbMeasureFrameLength()
- * compiled in. This function can be used to calibrate the AVR's RC oscillator.
- */
-#define USB_USE_FAST_CRC                0
-/* The assembler module has two implementations for the CRC algorithm. One is
- * faster, the other is smaller. This CRC routine is only used for transmitted
- * messages where timing is not critical. The faster routine needs 31 cycles
- * per byte while the smaller one needs 61 to 69 cycles. The faster routine
- * may be worth the 32 bytes bigger code size if you transmit lots of data and
- * run the AVR close to its limit.
- */
-
-/* -------------------------- Device Description --------------------------- */
-
-#define USB_CFG_VENDOR_ID       (VENDOR_ID & 0xFF), ((VENDOR_ID >> 8) & 0xFF)
-/* USB vendor ID for the device, low byte first. If you have registered your
- * own Vendor ID, define it here. Otherwise you may use one of obdev's free
- * shared VID/PID pairs. Be sure to read USB-IDs-for-free.txt for rules!
- * *** IMPORTANT NOTE ***
- * This template uses obdev's shared VID/PID pair for Vendor Class devices
- * with libusb: 0x16c0/0x5dc.  Use this VID/PID pair ONLY if you understand
- * the implications!
- */
-#define USB_CFG_DEVICE_ID       (PRODUCT_ID & 0xFF), ((PRODUCT_ID >> 8) & 0xFF)
-/* This is the ID of the product, low byte first. It is interpreted in the
- * scope of the vendor ID. If you have registered your own VID with usb.org
- * or if you have licensed a PID from somebody else, define it here. Otherwise
- * you may use one of obdev's free shared VID/PID pairs. See the file
- * USB-IDs-for-free.txt for details!
- * *** IMPORTANT NOTE ***
- * This template uses obdev's shared VID/PID pair for Vendor Class devices
- * with libusb: 0x16c0/0x5dc.  Use this VID/PID pair ONLY if you understand
- * the implications!
- */
-#define USB_CFG_DEVICE_VERSION  (DEVICE_VER & 0xFF), ((DEVICE_VER >> 8) & 0xFF)
-/* Version number of the device: Minor number first, then major number.
- */
-#define USB_CFG_VENDOR_NAME     'H', 'N', 'B'
-#define USB_CFG_VENDOR_NAME_LEN 3
-/* These two values define the vendor name returned by the USB device. The name
- * must be given as a list of characters under single quotes. The characters
- * are interpreted as Unicode (UTF-16) entities.
- * If you don't want a vendor name string, undefine these macros.
- * ALWAYS define a vendor name containing your Internet domain name if you use
- * obdev's free shared VID/PID pair. See the file USB-IDs-for-free.txt for
- * details.
- */
-#define USB_CFG_DEVICE_NAME     'D', 'B', '6', '3', 'H', 'S'
-#define USB_CFG_DEVICE_NAME_LEN 6
-/* Same as above for the device name. If you don't want a device name, undefine
- * the macros. See the file USB-IDs-for-free.txt before you assign a name if
- * you use a shared VID/PID.
- */
-/*#define USB_CFG_SERIAL_NUMBER   'N', 'o', 'n', 'e' */
-/*#define USB_CFG_SERIAL_NUMBER_LEN   0 */
-/* Same as above for the serial number. If you don't want a serial number,
- * undefine the macros.
- * It may be useful to provide the serial number through other means than at
- * compile time. See the section about descriptor properties below for how
- * to fine tune control over USB descriptors such as the string descriptor
- * for the serial number.
- */
-#define USB_CFG_DEVICE_CLASS        0
-#define USB_CFG_DEVICE_SUBCLASS     0
-/* See USB specification if you want to conform to an existing device class.
- * Class 0xff is "vendor specific".
- */
-#define USB_CFG_INTERFACE_CLASS     3   /* HID */
-#define USB_CFG_INTERFACE_SUBCLASS  1   /* Boot */
-#define USB_CFG_INTERFACE_PROTOCOL  1   /* Keyboard */
-/* See USB specification if you want to conform to an existing device class or
- * protocol. The following classes must be set at interface level:
- * HID class is 3, no subclass and protocol required (but may be useful!)
- * CDC class is 2, use subclass 2 and protocol 1 for ACM
- */
-#define USB_CFG_HID_REPORT_DESCRIPTOR_LENGTH    0
-/* Define this to the length of the HID report descriptor, if you implement
- * an HID device. Otherwise don't define it or define it to 0.
- * If you use this define, you must add a PROGMEM character array named
- * "usbHidReportDescriptor" to your code which contains the report descriptor.
- * Don't forget to keep the array and this define in sync!
- */
-
-/* #define USB_PUBLIC static */
-/* Use the define above if you #include usbdrv.c instead of linking against it.
- * This technique saves a couple of bytes in flash memory.
- */
-
-/* ------------------- Fine Control over USB Descriptors ------------------- */
-/* If you don't want to use the driver's default USB descriptors, you can
- * provide our own. These can be provided as (1) fixed length static data in
- * flash memory, (2) fixed length static data in RAM or (3) dynamically at
- * runtime in the function usbFunctionDescriptor(). See usbdrv.h for more
- * information about this function.
- * Descriptor handling is configured through the descriptor's properties. If
- * no properties are defined or if they are 0, the default descriptor is used.
- * Possible properties are:
- *   + USB_PROP_IS_DYNAMIC: The data for the descriptor should be fetched
- *     at runtime via usbFunctionDescriptor(). If the usbMsgPtr mechanism is
- *     used, the data is in FLASH by default. Add property USB_PROP_IS_RAM if
- *     you want RAM pointers.
- *   + USB_PROP_IS_RAM: The data returned by usbFunctionDescriptor() or found
- *     in static memory is in RAM, not in flash memory.
- *   + USB_PROP_LENGTH(len): If the data is in static memory (RAM or flash),
- *     the driver must know the descriptor's length. The descriptor itself is
- *     found at the address of a well known identifier (see below).
- * List of static descriptor names (must be declared PROGMEM if in flash):
- *   char usbDescriptorDevice[];
- *   char usbDescriptorConfiguration[];
- *   char usbDescriptorHidReport[];
- *   char usbDescriptorString0[];
- *   int usbDescriptorStringVendor[];
- *   int usbDescriptorStringDevice[];
- *   int usbDescriptorStringSerialNumber[];
- * Other descriptors can't be provided statically, they must be provided
- * dynamically at runtime.
- *
- * Descriptor properties are or-ed or added together, e.g.:
- * #define USB_CFG_DESCR_PROPS_DEVICE   (USB_PROP_IS_RAM | USB_PROP_LENGTH(18))
- *
- * The following descriptors are defined:
- *   USB_CFG_DESCR_PROPS_DEVICE
- *   USB_CFG_DESCR_PROPS_CONFIGURATION
- *   USB_CFG_DESCR_PROPS_STRINGS
- *   USB_CFG_DESCR_PROPS_STRING_0
- *   USB_CFG_DESCR_PROPS_STRING_VENDOR
- *   USB_CFG_DESCR_PROPS_STRING_PRODUCT
- *   USB_CFG_DESCR_PROPS_STRING_SERIAL_NUMBER
- *   USB_CFG_DESCR_PROPS_HID
- *   USB_CFG_DESCR_PROPS_HID_REPORT
- *   USB_CFG_DESCR_PROPS_UNKNOWN (for all descriptors not handled by the driver)
- *
- * Note about string descriptors: String descriptors are not just strings, they
- * are Unicode strings prefixed with a 2 byte header. Example:
- * int  serialNumberDescriptor[] = {
- *     USB_STRING_DESCRIPTOR_HEADER(6),
- *     'S', 'e', 'r', 'i', 'a', 'l'
- * };
- */
-
-#define USB_CFG_DESCR_PROPS_DEVICE                  0
-#define USB_CFG_DESCR_PROPS_CONFIGURATION           USB_PROP_IS_DYNAMIC
-//#define USB_CFG_DESCR_PROPS_CONFIGURATION           0
-#define USB_CFG_DESCR_PROPS_STRINGS                 0
-#define USB_CFG_DESCR_PROPS_STRING_0                0
-#define USB_CFG_DESCR_PROPS_STRING_VENDOR           0
-#define USB_CFG_DESCR_PROPS_STRING_PRODUCT          0
-#define USB_CFG_DESCR_PROPS_STRING_SERIAL_NUMBER    0
-#define USB_CFG_DESCR_PROPS_HID                     USB_PROP_IS_DYNAMIC
-//#define USB_CFG_DESCR_PROPS_HID                     0
-#define USB_CFG_DESCR_PROPS_HID_REPORT              USB_PROP_IS_DYNAMIC
-//#define USB_CFG_DESCR_PROPS_HID_REPORT              0
-#define USB_CFG_DESCR_PROPS_UNKNOWN                 0
-
-#define usbMsgPtr_t unsigned short
-/* If usbMsgPtr_t is not defined, it defaults to 'uchar *'. We define it to
- * a scalar type here because gcc generates slightly shorter code for scalar
- * arithmetics than for pointer arithmetics. Remove this define for backward
- * type compatibility or define it to an 8 bit type if you use data in RAM only
- * and all RAM is below 256 bytes (tiny memory model in IAR CC).
- */
-
-/* ----------------------- Optional MCU Description ------------------------ */
-
-/* The following configurations have working defaults in usbdrv.h. You
- * usually don't need to set them explicitly. Only if you want to run
- * the driver on a device which is not yet supported or with a compiler
- * which is not fully supported (such as IAR C) or if you use a differnt
- * interrupt than INT0, you may have to define some of these.
- */
-/* #define USB_INTR_CFG            MCUCR */
-/* #define USB_INTR_CFG_SET        ((1 << ISC00) | (1 << ISC01)) */
-/* #define USB_INTR_CFG_CLR        0 */
-/* #define USB_INTR_ENABLE         GIMSK */
-/* #define USB_INTR_ENABLE_BIT     INT0 */
-/* #define USB_INTR_PENDING        GIFR */
-/* #define USB_INTR_PENDING_BIT    INTF0 */
-/* #define USB_INTR_VECTOR         INT0_vect */
-
-/* Set INT1 for D- falling edge to count SOF */
-/* #define USB_INTR_CFG            EICRA */
-#define USB_INTR_CFG_SET        ((1 << ISC11) | (0 << ISC10))
-/* #define USB_INTR_CFG_CLR        0 */
-/* #define USB_INTR_ENABLE         EIMSK */
-#define USB_INTR_ENABLE_BIT     INT1
-/* #define USB_INTR_PENDING        EIFR */
-#define USB_INTR_PENDING_BIT    INTF1
-#define USB_INTR_VECTOR         INT1_vect

keyboards/dztech/dz60rgb/keymaps/kgreulich/config.h

@@ -1,70 +0,0 @@
-#pragma once
-
-#define FORCE_NKRO
-
-#define PERMISSIVE_HOLD
-
-#define TAP_HOLD_CAPS_DELAY 0
-#define USB_POLLING_INTERVAL_MS 1
-
-#define QMK_KEYS_PER_SCAN 4
-
-// some speed shit
-#define NO_ACTION_MACRO
-#define NO_ACTION_FUNCTION
-
-#ifndef NO_DEBUG
-#define NO_DEBUG
-#endif // !NO_DEBUG
-#if !defined(NO_PRINT) && !defined(CONSOLE_ENABLE)
-#define NO_PRINT
-#endif // !NO_PRINT
-
-#define NO_ACTION_ONESHOT
-#define TAPPING_FORCE_HOLD
-#define IGNORE_MOD_TAP_INTERRUPT
-
-// #include "config_led.h"
-// #include "dz60rgb.h"
-#undef DISABLE_RGB_MATRIX_SPLASH
-#undef DISABLE_RGB_MATRIX_MULTISPLASH
-#undef DISABLE_RGB_MATRIX_SOLID_MULTISPLASH
-#undef RGB_MATRIX_STARTUP_MODE
-#define RGB_MATRIX_FRAMEBUFFER_EFFECTS
-#define DISABLE_RGB_MATRIX_SOLID_COLOR
-#define DISABLE_RGB_MATRIX_ALPHAS_MODS
-#define DISABLE_RGB_MATRIX_GRADIENT_UP_DOWN
-#define DISABLE_RGB_MATRIX_BREATHING
-#define DISABLE_RGB_MATRIX_BAND_SAT
-#define DISABLE_RGB_MATRIX_BAND_VAL
-#define DISABLE_RGB_MATRIX_BAND_PINWHEEL_SAT
-#define DISABLE_RGB_MATRIX_BAND_PINWHEEL_VAL
-#define DISABLE_RGB_MATRIX_BAND_SPIRAL_SAT
-#define DISABLE_RGB_MATRIX_BAND_SPIRAL_VAL
-#define DISABLE_RGB_MATRIX_CYCLE_ALL
-#define DISABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT
-#define DISABLE_RGB_MATRIX_CYCLE_UP_DOWN
-#define DISABLE_RGB_MATRIX_CYCLE_OUT_IN
-#define DISABLE_RGB_MATRIX_CYCLE_OUT_IN_DUAL
-#define DISABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON
-#define DISABLE_RGB_MATRIX_CYCLE_PINWHEEL
-#define DISABLE_RGB_MATRIX_CYCLE_SPIRAL
-#define DISABLE_RGB_MATRIX_DUAL_BEACON
-#define DISABLE_RGB_MATRIX_RAINBOW_BEACON
-#define DISABLE_RGB_MATRIX_RAINBOW_PINWHEELS
-#define DISABLE_RGB_MATRIX_RAINDROPS
-#define DISABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS
-#define DISABLE_RGB_MATRIX_TYPING_HEATMAP
-#define DISABLE_RGB_MATRIX_DIGITAL_RAIN
-#define DISABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE
-//#define DISABLE_RGB_MATRIX_SOLID_REACTIVE
-#define DISABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE
-#define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE
-#define DISABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS
-#define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS
-#define DISABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS
-#define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS
-#define DISABLE_RGB_MATRIX_SPLASH
-#define DISABLE_RGB_MATRIX_MULTISPLASH
-#define DISABLE_RGB_MATRIX_SOLID_SPLASH
-#define DISABLE_RGB_MATRIX_SOLID_MULTISPLASH

keyboards/dztech/dz60rgb/keymaps/kgreulich/keymap.c

@@ -1,25 +0,0 @@
-#include QMK_KEYBOARD_H
-
-const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-    [0] = LAYOUT(
-        KC_ESC,        KC_1,    KC_2,            KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS,         KC_EQL,  KC_BSPC,
-        KC_TAB,         KC_Q,    KC_W,            KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC,         KC_RBRC, KC_BSLS,
-        KC_CAPS, KC_A,    KC_S,            KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT,                  KC_ENT,
-        KC_LSFT,                 KC_Z,            KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_UP,   LT(2, KC_DEL),
-        KC_LCTL,        KC_LGUI, KC_LALT,                            KC_SPC,                    KC_RALT, MO(1),   KC_LEFT,         KC_DOWN, KC_RGHT
-    ),
-    [1] = LAYOUT(
-        KC_GRAVE,   KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_DEL,
-        _______, _______, _______,   _______, _______, _______, KC_CALC, _______, KC_INS,  _______, KC_PSCR, KC_SLCK, KC_PAUS, RESET,
-        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_HOME, KC_PGUP,          EEP_RST,
-        _______,          _______, _______, _______, _______, _______, NK_TOGG, _______, _______, KC_END,  KC_PGDN, KC_VOLU, KC_MUTE,
-        _______, _______, _______,                            KC_SPC,                     _______, _______, KC_MPRV, KC_VOLD, KC_MNXT
-    ),
-    [2] = LAYOUT(
-        _______, KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_DEL,
-        _______, RGB_TOG, _______, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, RGB_MOD, _______, _______, _______, RESET,
-        _______, _______, _______, _______, _______, _______, _______, _______, RGB_SPI, RGB_SPD, _______, _______,          EEP_RST,
-        _______,          _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
-        _______, _______, _______,                            _______,                   _______, _______, _______, _______, _______
-    )
-};

keyboards/dztech/dz60rgb/keymaps/kgreulich/rules.mk

@@ -1 +0,0 @@
-NKRO_ENABLE = yes                 # USB Nkey Rollover

keyboards/efreet/config.h

@@ -20,8 +20,8 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #include "config_common.h"
 
 /* USB Device descriptor parameter */
-#define VENDOR_ID       0x534F // "SO"
-#define PRODUCT_ID      0x0001
+#define VENDOR_ID       0xFEED
+#define PRODUCT_ID      0x0000
 #define DEVICE_VER      0x0001
 #define MANUFACTURER    Soran
 #define PRODUCT         Efreet

keyboards/efreet/keymaps/via/keymap.c

@@ -1,43 +0,0 @@
-/* Copyright 2020 Wilba
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-#include QMK_KEYBOARD_H
-
-const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-  [0] = LAYOUT_ortho_4x12(
-    KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_BSPC,
-    KC_ESC,  KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT,
-    KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_ENT ,
-    BL_TOGG, KC_LCTL, KC_LALT, KC_LGUI, MO(1),   KC_SPC,  KC_SPC,  MO(2),   KC_LEFT, KC_DOWN, KC_UP,   KC_RGHT
-  ),
-   [1] = LAYOUT_ortho_4x12(
-    KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_BSPC,
-    KC_DEL,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_MINS, KC_EQL,  KC_LBRC, KC_RBRC, KC_BSLS,
-    _______, KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_NUHS, KC_NUBS, KC_PGUP, KC_PGDN, _______,
-    _______, _______, _______, _______, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY
-  ),
-   [2] = LAYOUT_ortho_4x12(
-    KC_TILD, KC_EXLM, KC_AT,   KC_HASH, KC_DLR,  KC_PERC, KC_CIRC, KC_AMPR,    KC_ASTR,    KC_LPRN, KC_RPRN, KC_BSPC,
-    KC_DEL,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_UNDS,    KC_PLUS,    KC_LCBR, KC_RCBR, KC_PIPE,
-    _______, KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  S(KC_NUHS), S(KC_NUBS), KC_HOME, KC_END,  _______,
-    _______, _______, _______, _______, _______, _______, _______, _______,    KC_MNXT,    KC_VOLD, KC_VOLU, KC_MPLY
-  ),
-   [3] = LAYOUT_ortho_4x12(
-    _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
-    _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
-    _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
-    _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______
-  )
-};

keyboards/efreet/keymaps/via/rules.mk

@@ -1 +0,0 @@
-VIA_ENABLE = yes

keyboards/efreet/rules.mk

@@ -14,19 +14,19 @@ BOOTLOADER = atmel-dfu
 # Build Options
 #   change yes to no to disable
 #
-BOOTMAGIC_ENABLE = lite      # Virtual DIP switch configuration
-MOUSEKEY_ENABLE = yes       # Mouse keys
-EXTRAKEY_ENABLE = yes       # Audio control and System control
-CONSOLE_ENABLE = no        	# Console for debug
-COMMAND_ENABLE = no        # Commands for debug and configuration
+BOOTMAGIC_ENABLE = yes      # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
+CONSOLE_ENABLE = no        	# Console for debug(+400)
+COMMAND_ENABLE = yes        # Commands for debug and configuration
 NKRO_ENABLE = yes           # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
 BACKLIGHT_ENABLE = yes       # Enable keyboard backlight functionality
 RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
-MIDI_ENABLE = no            # MIDI support
+MIDI_ENABLE = no            # MIDI support (+2400 to 4200, depending on config)
 UNICODE_ENABLE = no         # Unicode
 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
 AUDIO_ENABLE = no           # Audio output on port C6
 FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
-HD44780_ENABLE = no 				# Enable support for HD44780 based LCDs
+HD44780_ENABLE = no 				# Enable support for HD44780 based LCDs (+400)
 
 LAYOUTS = ortho_4x12 planck_mit

keyboards/exclusive/e6_rgb/config.h

@@ -7,8 +7,8 @@
 #include "config_common.h"
 
 /* USB Device descriptor parameter */
-#define VENDOR_ID       0x4154      //AT
-#define PRODUCT_ID      0x4536      //E6
+#define VENDOR_ID       0xDEAD
+#define PRODUCT_ID      0xFEED
 #define DEVICE_VER      0x0062
 #define MANUFACTURER    astro
 #define PRODUCT         e6rgb
@@ -23,6 +23,27 @@
 #define UNUSED_PINS
 #define DIODE_DIRECTION COL2ROW
 
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCE 5
+
+/*
+ * Feature disable options
+ *  These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+//#define NO_DEBUG
+
+/* disable print */
+//#define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+//#define NO_ACTION_MACRO
+//#define NO_ACTION_FUNCTION
+
 //rgb light setting
 #define RGBLED_NUM      6
 #define RGB_DI_PIN      B7
@@ -37,3 +58,8 @@
 #define DRIVER_COUNT 2
 #define DRIVER_1_LED_TOTAL 63
 #define DRIVER_LED_TOTAL DRIVER_1_LED_TOTAL
+
+// tapping setting
+#define TAPPING_TERM    200
+#define RETRO_TAPPING
+#define PERMISSIVE_HOLD

keyboards/exclusive/e6_rgb/e6_rgb.c

@@ -5,10 +5,24 @@
 #include "e6_rgb.h"
 
 #ifdef RGB_MATRIX_ENABLE
+__attribute__ ((weak))
 void matrix_init_kb(void) {
+    matrix_init_user();
+}
+
+__attribute__ ((weak))
+void matrix_scan_kb(void) {
+    matrix_scan_user();
+}
+
+__attribute__ ((weak))
+void matrix_init_user(void) {
   setPinOutput(D5);
   writePinHigh(D5);
-  matrix_init_user();
+}
+
+__attribute__ ((weak))
+void matrix_scan_user(void) {
 }
 
 const is31_led g_is31_leds[DRIVER_LED_TOTAL] = {
@@ -176,30 +190,3 @@ led_config_t g_led_config = { {
 } };
 
 #endif
-
-bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
-    if (record->event.pressed) {
-        switch(keycode) {
-#if defined(RGBLIGHT_ENABLE) && defined(RGB_MATRIX_ENABLE)
-            case KC_F13: // toggle rgb matrix
-                rgb_matrix_toggle();
-                return false;
-            case KC_F14:
-                rgb_matrix_step();
-                return false;
-            case KC_F15:
-                rgb_matrix_increase_hue();
-                return false;
-            case KC_F16:
-                rgb_matrix_increase_sat();
-                return false;
-            case KC_F17:
-                rgb_matrix_increase_val();
-                return false;
-#endif
-            default:
-                break;
-        }
-    }
-  return true;
-}

keyboards/exclusive/e6_rgb/e6_rgb.h

@@ -10,75 +10,74 @@
 // The first section contains all of the arguements
 // The second converts the arguments into a two-dimensional array
 #define LAYOUT_60_ansi( \
-    k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0e, \
+  k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0e, \
 	k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1e, \
 	k20,      k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2e, \
 	k30,      k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, \
 	k40,      k42, k43,                k47, k48, k49, k4a, k4b       \
 ) \
 { \
-    {k00, k01, k02,   k03,   k04,   k05, k06,   k07,   k08,   k09, k0a, k0b, k0c, KC_NO}, \
-    {k10, k11, k12,   k13,   k14,   k15, k16,   k17,   k18,   k19, k1a, k1b, k1c,   k1e}, \
-    {k20, k22, k23,   k24,   k25,   k26, k27,   k28,   k29,   k2a, k2b, k2c, k2e,   k0e}, \
-    {k30, k32, k33,   k34,   k35,   k36, k37,   k38, KC_NO,   k39, k3a, k3b, k3c, KC_NO}, \
-    {k40, k42, k43, KC_NO, KC_NO, KC_NO, k47, KC_NO, KC_NO, KC_NO, k48, k49, k4a,   k4b}  \
+	{k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, KC_NO}, \
+  {k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1e}, \
+  {k20, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2e, k0e}, \
+  {k30, k32, k33, k34, k35, k36, k37, k38, KC_NO, k39, k3a, k3b, k3c, KC_NO}, \
+  {k40, k42, k43, KC_NO, KC_NO, KC_NO, k47, KC_NO, KC_NO, KC_NO, k48, k49, k4a, k4b}  \
 }
 
 #define LAYOUT_60_wkl( \
-    k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0e, \
+  k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0e, \
 	k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1e, \
 	k20,      k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2e, \
 	k30,      k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d, \
 	k40,      k42, k43,                k47,      k49, k4a, k4b       \
 ) \
 { \
-    {k00, k01, k02,   k03,   k04,   k05, k06,   k07,   k08,   k09,   k0a, k0b, k0c, KC_NO}, \
-    {k10, k11, k12,   k13,   k14,   k15, k16,   k17,   k18,   k19,   k1a, k1b, k1c,   k1e}, \
-    {k20, k22, k23,   k24,   k25,   k26, k27,   k28,   k29,   k2a,   k2b, k2c, k2e,   k0e}, \
-    {k30, k32, k33,   k34,   k35,   k36, k37,   k38, KC_NO,   k39,   k3a, k3b, k3c,   k3d}, \
-    {k40, k42, k43, KC_NO, KC_NO, KC_NO, k47, KC_NO, KC_NO, KC_NO, KC_NO, k49, k4a,   k4b}  \
+	{k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, KC_NO}, \
+  {k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1e}, \
+  {k20, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2e, k0e}, \
+  {k30, k32, k33, k34, k35, k36, k37, k38, KC_NO, k39, k3a, k3b, k3c, k3d}, \
+  {k40, k42, k43, KC_NO, KC_NO, KC_NO, k47, KC_NO, KC_NO, KC_NO, KC_NO, k49, k4a, k4b}  \
 }
 
 #define LAYOUT_60_hhkb( \
-    k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d, k0e, \
+  k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d, k0e, \
 	k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1e, \
 	k20,      k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2e, \
 	k30,      k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d, \
        k42, k43,                     k47,                k49, k4a \
 ) \
 { \
-    {  k00, k01, k02,   k03,   k04,   k05, k06,   k07,   k08,   k09,   k0a, k0b, k0c,   k0d}, \
-    {  k10, k11, k12,   k13,   k14,   k15, k16,   k17,   k18,   k19,   k1a, k1b, k1c,   k1e}, \
-    {  k20, k22, k23,   k24,   k25,   k26, k27,   k28,   k29,   k2a,   k2b, k2c, k2e,   k0e}, \
-    {  k30, k32, k33,   k34,   k35,   k36, k37,   k38, KC_NO,   k39,   k3a, k3b, k3c,   k3d}, \
-    {KC_NO, k42, k43, KC_NO, KC_NO, KC_NO, k47, KC_NO, KC_NO, KC_NO, KC_NO, k49, k4a, KC_NO}  \
+	{k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d}, \
+  {k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1e}, \
+  {k20, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2e, k0e}, \
+  {k30, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, KC_NO, k3c, k3d}, \
+  {KC_NO, k42, k43, KC_NO, KC_NO, KC_NO, k47, KC_NO, KC_NO, KC_NO, KC_NO, k49, k4a, KC_NO}  \
 }
-
 #define LAYOUT_60_wkl_split_bs( \
-    k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d, k0e, \
+  k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d, k0e, \
 	k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1e, \
 	k20,      k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2e, \
 	k30,      k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d, \
 	k40,      k42, k43,                k47,      k49, k4a, k4b       \
 ) \
 { \
-    {k00, k01, k02,   k03,   k04,   k05, k06,   k07,   k08,   k09,   k0a, k0b, k0c, k0d}, \
-    {k10, k11, k12,   k13,   k14,   k15, k16,   k17,   k18,   k19,   k1a, k1b, k1c, k1e}, \
-    {k20, k22, k23,   k24,   k25,   k26, k27,   k28,   k29,   k2a,   k2b, k2c, k2e, k0e}, \
-    {k30, k32, k33,   k34,   k35,   k36, k37,   k38, KC_NO,   k39,   k3a, k3b, k3c, k3d}, \
-    {k40, k42, k43, KC_NO, KC_NO, KC_NO, k47, KC_NO, KC_NO, KC_NO, KC_NO, k49, k4a, k4b}  \
+	{k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d}, \
+  {k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1e}, \
+  {k20, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2e, k0e}, \
+  {k30, k32, k33, k34, k35, k36, k37, k38, KC_NO, k39, k3a, k3b, k3c, k3d}, \
+  {k40, k42, k43, KC_NO, KC_NO, KC_NO, k47, KC_NO, KC_NO, KC_NO, KC_NO, k49, k4a, k4b}  \
 }
 #define LAYOUT_60_ansi_split_bs_shift( \
-    k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d, k0e, \
+  k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d, k0e, \
 	k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1e, \
 	k20,      k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2e, \
 	k30,      k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d, \
 	k40,      k42, k43,                k47,      k48,  k49, k4a, k4b       \
 ) \
 { \
-    {k00, k01, k02,   k03,   k04,   k05, k06,   k07,   k08,   k09, k0a, k0b, k0c, k0d}, \
-    {k10, k11, k12,   k13,   k14,   k15, k16,   k17,   k18,   k19, k1a, k1b, k1c, k1e}, \
-    {k20, k22, k23,   k24,   k25,   k26, k27,   k28,   k29,   k2a, k2b, k2c, k2e, k0e}, \
-    {k30, k32, k33,   k34,   k35,   k36, k37,   k38, KC_NO,   k39, k3a, k3b, k3c, k3d}, \
-    {k40, k42, k43, KC_NO, KC_NO, KC_NO, k47, KC_NO, KC_NO, KC_NO, k48, k49, k4a, k4b}  \
+	{k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d}, \
+  {k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1e}, \
+  {k20, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2e, k0e}, \
+  {k30, k32, k33, k34, k35, k36, k37, k38, KC_NO, k39, k3a, k3b, k3c, k3d}, \
+  {k40, k42, k43, KC_NO, KC_NO, KC_NO, k47, KC_NO, KC_NO, KC_NO, k48, k49, k4a, k4b}  \
 }

keyboards/exclusive/e6_rgb/keymaps/allleds/keymap.c

@@ -1,16 +0,0 @@
-#include QMK_KEYBOARD_H
-
-const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-  [0] = LAYOUT_60_wkl_split_bs(
-      KC_ESC,      KC_1,   KC_2,   KC_3,   KC_4,   KC_5,   KC_6,   KC_7,   KC_8,   KC_9,   KC_0,   KC_MINS,KC_EQL, KC_BSLS, KC_GRV,\
-      KC_TAB,      KC_Q,   KC_W,   KC_E,   KC_R,   KC_T,   KC_Y,   KC_U,   KC_I,   KC_O,   KC_P,   KC_LBRC,KC_RBRC,KC_BSPC,\
-      KC_LCTRL,    KC_A,   KC_S,   KC_D,   KC_F,   KC_G,   KC_H,   KC_J,   KC_K,   KC_L,   KC_SCLN,KC_QUOT,        KC_ENT,\
-      KC_LSFT,     KC_Z,   KC_X,   KC_C,   KC_V,   KC_B,   KC_N,   KC_M,   KC_COMM,KC_DOT, KC_SLSH,  KC_RSFT,   KC_END,\
-      KC_CAPS,  KC_LGUI,  KC_LALT,                        LT(1,KC_SPC),                   KC_RALT,  TG(1),   KC_RCTL),
-    [1] = LAYOUT_60_wkl_split_bs(
-      _______,   KC_F1,  KC_F2,  KC_F3,  KC_F4,  KC_F5,  KC_F6,  KC_F7,  KC_F8,  KC_F9, KC_F10, KC_F11, KC_F12,_______,KC_PSCR,\
-      RESET,   RGB_TOG,RGB_MOD,_______,_______,_______,_______,_______,_______,_______,_______,KC_PGUP,KC_PGDN,_______,\
-      _______,        _______,_______,_______,_______,_______,KC_LEFT,KC_DOWN,KC_UP,KC_RIGHT,_______,_______,_______,\
-      _______,        _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,\
-      _______,_______,_______,                        _______,                                _______,TG(0),_______),
-};